diff options
Diffstat (limited to 'drivers/firmware')
-rw-r--r-- | drivers/firmware/ti_sci.c | 433 | ||||
-rw-r--r-- | drivers/firmware/ti_sci.h | 98 |
2 files changed, 531 insertions, 0 deletions
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index 5e99d7c18276..c7b25ccf6f07 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -495,6 +495,437 @@ fail: } /** + * ti_sci_is_response_ack() - Generic ACK/NACK message checkup + * @r: pointer to response buffer + * + * Return: true if the response was an ACK, else returns false. + */ +static inline bool ti_sci_is_response_ack(void *r) +{ + struct ti_sci_msg_hdr *hdr = r; + + return hdr->flags & TI_SCI_FLAG_RESP_GENERIC_ACK ? true : false; +} + +/** + * ti_sci_set_device_state() - Set device state helper + * @handle: pointer to TI SCI handle + * @id: Device identifier + * @flags: flags to setup for the device + * @state: State to move the device to + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_set_device_state(const struct ti_sci_handle *handle, + u32 id, u32 flags, u8 state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_device_state *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE, + flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_device_state *)xfer->xfer_buf; + req->id = id; + req->state = state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_get_device_state() - Get device state helper + * @handle: Handle to the device + * @id: Device Identifier + * @clcnt: Pointer to Context Loss Count + * @resets: pointer to resets + * @p_state: pointer to p_state + * @c_state: pointer to c_state + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_get_device_state(const struct ti_sci_handle *handle, + u32 id, u32 *clcnt, u32 *resets, + u8 *p_state, u8 *c_state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_device_state *req; + struct ti_sci_msg_resp_get_device_state *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + if (!clcnt && !resets && !p_state && !c_state) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + /* Response is expected, so need of any flags */ + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE, + 0, sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_device_state *)xfer->xfer_buf; + req->id = id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_device_state *)xfer->xfer_buf; + if (!ti_sci_is_response_ack(resp)) { + ret = -ENODEV; + goto fail; + } + + if (clcnt) + *clcnt = resp->context_loss_count; + if (resets) + *resets = resp->resets; + if (p_state) + *p_state = resp->programmed_state; + if (c_state) + *c_state = resp->current_state; +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_device() - command to request for device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * NOTE: The request is for exclusive access for the processor. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + MSG_FLAG_DEVICE_EXCLUSIVE, + MSG_DEVICE_SW_STATE_ON); +} + +/** + * ti_sci_cmd_idle_device() - Command to idle a device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + MSG_FLAG_DEVICE_EXCLUSIVE, + MSG_DEVICE_SW_STATE_RETENTION); +} + +/** + * ti_sci_cmd_put_device() - command to release a device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_put_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + 0, MSG_DEVICE_SW_STATE_AUTO_OFF); +} + +/** + * ti_sci_cmd_dev_is_valid() - Is the device valid + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Return: 0 if all went fine and the device ID is valid, else return + * appropriate error. + */ +static int ti_sci_cmd_dev_is_valid(const struct ti_sci_handle *handle, u32 id) +{ + u8 unused; + + /* check the device state which will also tell us if the ID is valid */ + return ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &unused); +} + +/** + * ti_sci_cmd_dev_get_clcnt() - Get context loss counter + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @count: Pointer to Context Loss counter to populate + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_get_clcnt(const struct ti_sci_handle *handle, u32 id, + u32 *count) +{ + return ti_sci_get_device_state(handle, id, count, NULL, NULL, NULL); +} + +/** + * ti_sci_cmd_dev_is_idle() - Check if the device is requested to be idle + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be idle + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_idle(const struct ti_sci_handle *handle, u32 id, + bool *r_state) +{ + int ret; + u8 state; + + if (!r_state) + return -EINVAL; + + ret = ti_sci_get_device_state(handle, id, NULL, NULL, &state, NULL); + if (ret) + return ret; + + *r_state = (state == MSG_DEVICE_SW_STATE_RETENTION); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_stop() - Check if the device is requested to be stopped + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be stopped + * @curr_state: true if currently stopped. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_stop(const struct ti_sci_handle *handle, u32 id, + bool *r_state, bool *curr_state) +{ + int ret; + u8 p_state, c_state; + + if (!r_state && !curr_state) + return -EINVAL; + + ret = + ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); + if (ret) + return ret; + + if (r_state) + *r_state = (p_state == MSG_DEVICE_SW_STATE_AUTO_OFF); + if (curr_state) + *curr_state = (c_state == MSG_DEVICE_HW_STATE_OFF); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_on() - Check if the device is requested to be ON + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be ON + * @curr_state: true if currently ON and active + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_on(const struct ti_sci_handle *handle, u32 id, + bool *r_state, bool *curr_state) +{ + int ret; + u8 p_state, c_state; + + if (!r_state && !curr_state) + return -EINVAL; + + ret = + ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); + if (ret) + return ret; + + if (r_state) + *r_state = (p_state == MSG_DEVICE_SW_STATE_ON); + if (curr_state) + *curr_state = (c_state == MSG_DEVICE_HW_STATE_ON); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_trans() - Check if the device is currently transitioning + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @curr_state: true if currently transitioning. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_trans(const struct ti_sci_handle *handle, u32 id, + bool *curr_state) +{ + int ret; + u8 state; + + if (!curr_state) + return -EINVAL; + + ret = ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &state); + if (ret) + return ret; + + *curr_state = (state == MSG_DEVICE_HW_STATE_TRANS); + + return 0; +} + +/** + * ti_sci_cmd_set_device_resets() - command to set resets for device managed + * by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * @reset_state: Device specific reset bit field + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_set_device_resets(const struct ti_sci_handle *handle, + u32 id, u32 reset_state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_device_resets *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_DEVICE_RESETS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_device_resets *)xfer->xfer_buf; + req->id = id; + req->resets = reset_state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_device_resets() - Get reset state for device managed + * by TISCI + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @reset_state: Pointer to reset state to populate + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_get_device_resets(const struct ti_sci_handle *handle, + u32 id, u32 *reset_state) +{ + return ti_sci_get_device_state(handle, id, NULL, reset_state, NULL, + NULL); +} + +/* + * ti_sci_setup_ops() - Setup the operations structures + * @info: pointer to TISCI pointer + */ +static void ti_sci_setup_ops(struct ti_sci_info *info) +{ + struct ti_sci_ops *ops = &info->handle.ops; + struct ti_sci_dev_ops *dops = &ops->dev_ops; + + dops->get_device = ti_sci_cmd_get_device; + dops->idle_device = ti_sci_cmd_idle_device; + dops->put_device = ti_sci_cmd_put_device; + + dops->is_valid = ti_sci_cmd_dev_is_valid; + dops->get_context_loss_count = ti_sci_cmd_dev_get_clcnt; + dops->is_idle = ti_sci_cmd_dev_is_idle; + dops->is_stop = ti_sci_cmd_dev_is_stop; + dops->is_on = ti_sci_cmd_dev_is_on; + dops->is_transitioning = ti_sci_cmd_dev_is_trans; + dops->set_device_resets = ti_sci_cmd_set_device_resets; + dops->get_device_resets = ti_sci_cmd_get_device_resets; +} + +/** * ti_sci_get_handle() - Get the TI SCI handle for a device * @dev: Pointer to device for which we want SCI handle * @@ -727,6 +1158,8 @@ static int ti_sci_probe(struct platform_device *pdev) goto out; } + ti_sci_setup_ops(info); + dev_info(dev, "ABI: %d.%d (firmware rev 0x%04x '%s')\n", info->handle.version.abi_major, info->handle.version.abi_minor, info->handle.version.firmware_revision, diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h index e9dc53f26e0e..29ce0532a7ca 100644 --- a/drivers/firmware/ti_sci.h +++ b/drivers/firmware/ti_sci.h @@ -47,6 +47,11 @@ #define TI_SCI_MSG_WAKE_REASON 0x0003 #define TI_SCI_MSG_GOODBYE 0x0004 +/* Device requests */ +#define TI_SCI_MSG_SET_DEVICE_STATE 0x0200 +#define TI_SCI_MSG_GET_DEVICE_STATE 0x0201 +#define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202 + /** * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses * @type: Type of messages: One of TI_SCI_MSG* values @@ -90,4 +95,97 @@ struct ti_sci_msg_resp_version { u8 abi_minor; } __packed; +/** + * struct ti_sci_msg_req_set_device_state - Set the desired state of the device + * @hdr: Generic header + * @id: Indicates which device to modify + * @reserved: Reserved space in message, must be 0 for backward compatibility + * @state: The desired state of the device. + * + * Certain flags can also be set to alter the device state: + * + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source. + * The meaning of this flag will vary slightly from device to device and from + * SoC to SoC but it generally allows the device to wake the SoC out of deep + * suspend states. + * + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device. + * + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed + * with STATE_RETENTION or STATE_ON, it will claim the device exclusively. + * If another host already has this device set to STATE_RETENTION or STATE_ON, + * the message will fail. Once successful, other hosts attempting to set + * STATE_RETENTION or STATE_ON will fail. + * + * Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_set_device_state { + /* Additional hdr->flags options */ +#define MSG_FLAG_DEVICE_WAKE_ENABLED TI_SCI_MSG_FLAG(8) +#define MSG_FLAG_DEVICE_RESET_ISO TI_SCI_MSG_FLAG(9) +#define MSG_FLAG_DEVICE_EXCLUSIVE TI_SCI_MSG_FLAG(10) + struct ti_sci_msg_hdr hdr; + u32 id; + u32 reserved; + +#define MSG_DEVICE_SW_STATE_AUTO_OFF 0 +#define MSG_DEVICE_SW_STATE_RETENTION 1 +#define MSG_DEVICE_SW_STATE_ON 2 + u8 state; +} __packed; + +/** + * struct ti_sci_msg_req_get_device_state - Request to get device. + * @hdr: Generic header + * @id: Device Identifier + * + * Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state + * information + */ +struct ti_sci_msg_req_get_device_state { + struct ti_sci_msg_hdr hdr; + u32 id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_device_state - Response to get device request. + * @hdr: Generic header + * @context_loss_count: Indicates how many times the device has lost context. A + * driver can use this monotonic counter to determine if the device has + * lost context since the last time this message was exchanged. + * @resets: Programmed state of the reset lines. + * @programmed_state: The state as programmed by set_device. + * - Uses the MSG_DEVICE_SW_* macros + * @current_state: The actual state of the hardware. + * + * Response to request TI_SCI_MSG_GET_DEVICE_STATE. + */ +struct ti_sci_msg_resp_get_device_state { + struct ti_sci_msg_hdr hdr; + u32 context_loss_count; + u32 resets; + u8 programmed_state; +#define MSG_DEVICE_HW_STATE_OFF 0 +#define MSG_DEVICE_HW_STATE_ON 1 +#define MSG_DEVICE_HW_STATE_TRANS 2 + u8 current_state; +} __packed; + +/** + * struct ti_sci_msg_req_set_device_resets - Set the desired resets + * configuration of the device + * @hdr: Generic header + * @id: Indicates which device to modify + * @resets: A bit field of resets for the device. The meaning, behavior, + * and usage of the reset flags are device specific. 0 for a bit + * indicates releasing the reset represented by that bit while 1 + * indicates keeping it held. + * + * Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_set_device_resets { + struct ti_sci_msg_hdr hdr; + u32 id; + u32 resets; +} __packed; + #endif /* __TI_SCI_H */ |