summaryrefslogtreecommitdiffstats
path: root/drivers/edac/amd64_edac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/edac/amd64_edac.c')
-rw-r--r--drivers/edac/amd64_edac.c246
1 files changed, 216 insertions, 30 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 8b6a0343c220..a5d6348d591f 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -123,7 +123,7 @@ static void f15h_select_dct(struct amd64_pvt *pvt, u8 dct)
u32 reg = 0;
amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, &reg);
- reg &= 0xfffffffe;
+ reg &= (pvt->model >= 0x30) ? ~3 : ~1;
reg |= dct;
amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg);
}
@@ -133,8 +133,9 @@ static int f15_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val,
{
u8 dct = 0;
+ /* For F15 M30h, the second dct is DCT 3, refer to BKDG Section 2.10 */
if (addr >= 0x140 && addr <= 0x1a0) {
- dct = 1;
+ dct = (pvt->model >= 0x30) ? 3 : 1;
addr -= 0x100;
}
@@ -205,8 +206,10 @@ static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bw)
if (boot_cpu_data.x86 == 0xf)
min_scrubrate = 0x0;
- /* F15h Erratum #505 */
- if (boot_cpu_data.x86 == 0x15)
+ /* Erratum #505 for F15h Model 0x00 - Model 0x01, Stepping 0 */
+ if (boot_cpu_data.x86 == 0x15 &&
+ boot_cpu_data.x86_model <= 0x01 &&
+ boot_cpu_data.x86_mask < 0x1)
f15h_select_dct(pvt, 0);
return __amd64_set_scrub_rate(pvt->F3, bw, min_scrubrate);
@@ -218,8 +221,10 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci)
u32 scrubval = 0;
int i, retval = -EINVAL;
- /* F15h Erratum #505 */
- if (boot_cpu_data.x86 == 0x15)
+ /* Erratum #505 for F15h Model 0x00 - Model 0x01, Stepping 0 */
+ if (boot_cpu_data.x86 == 0x15 &&
+ boot_cpu_data.x86_model <= 0x01 &&
+ boot_cpu_data.x86_mask < 0x1)
f15h_select_dct(pvt, 0);
amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
@@ -335,7 +340,7 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct,
u64 csbase, csmask, base_bits, mask_bits;
u8 addr_shift;
- if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) {
+ if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
csbase = pvt->csels[dct].csbases[csrow];
csmask = pvt->csels[dct].csmasks[csrow];
base_bits = GENMASK(21, 31) | GENMASK(9, 15);
@@ -343,10 +348,11 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct,
addr_shift = 4;
/*
- * F16h needs two addr_shift values: 8 for high and 6 for low
- * (cf. F16h BKDG).
- */
- } else if (boot_cpu_data.x86 == 0x16) {
+ * F16h and F15h, models 30h and later need two addr_shift values:
+ * 8 for high and 6 for low (cf. F16h BKDG).
+ */
+ } else if (pvt->fam == 0x16 ||
+ (pvt->fam == 0x15 && pvt->model >= 0x30)) {
csbase = pvt->csels[dct].csbases[csrow];
csmask = pvt->csels[dct].csmasks[csrow >> 1];
@@ -736,13 +742,16 @@ static void dump_misc_regs(struct amd64_pvt *pvt)
}
/*
- * see BKDG, F2x[1,0][5C:40], F2[1,0][6C:60]
+ * See BKDG, F2x[1,0][5C:40], F2[1,0][6C:60]
*/
static void prep_chip_selects(struct amd64_pvt *pvt)
{
- if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) {
+ if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8;
+ } else if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+ pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
+ pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
} else {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4;
@@ -916,15 +925,15 @@ static struct pci_dev *pci_get_related_function(unsigned int vendor,
static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
{
struct amd_northbridge *nb;
- struct pci_dev *misc, *f1 = NULL;
- struct cpuinfo_x86 *c = &boot_cpu_data;
+ struct pci_dev *f1 = NULL;
+ unsigned int pci_func;
int off = range << 3;
u32 llim;
amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo);
amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo);
- if (c->x86 == 0xf)
+ if (pvt->fam == 0xf)
return;
if (!dram_rw(pvt, range))
@@ -934,15 +943,17 @@ static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi);
/* F15h: factor in CC6 save area by reading dst node's limit reg */
- if (c->x86 != 0x15)
+ if (pvt->fam != 0x15)
return;
nb = node_to_amd_nb(dram_dst_node(pvt, range));
if (WARN_ON(!nb))
return;
- misc = nb->misc;
- f1 = pci_get_related_function(misc->vendor, PCI_DEVICE_ID_AMD_15H_NB_F1, misc);
+ pci_func = (pvt->model == 0x30) ? PCI_DEVICE_ID_AMD_15H_M30H_NB_F1
+ : PCI_DEVICE_ID_AMD_15H_NB_F1;
+
+ f1 = pci_get_related_function(nb->misc->vendor, pci_func, nb->misc);
if (WARN_ON(!f1))
return;
@@ -1173,7 +1184,7 @@ static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
}
/*
- * F16h has only limited cs_modes
+ * F16h and F15h model 30h have only limited cs_modes.
*/
static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
unsigned cs_mode)
@@ -1218,6 +1229,29 @@ static void read_dram_ctl_register(struct amd64_pvt *pvt)
}
/*
+ * Determine channel (DCT) based on the interleaving mode (see F15h M30h BKDG,
+ * 2.10.12 Memory Interleaving Modes).
+ */
+static u8 f15_m30h_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
+ u8 intlv_en, int num_dcts_intlv,
+ u32 dct_sel)
+{
+ u8 channel = 0;
+ u8 select;
+
+ if (!(intlv_en))
+ return (u8)(dct_sel);
+
+ if (num_dcts_intlv == 2) {
+ select = (sys_addr >> 8) & 0x3;
+ channel = select ? 0x3 : 0;
+ } else if (num_dcts_intlv == 4)
+ channel = (sys_addr >> 8) & 0x7;
+
+ return channel;
+}
+
+/*
* Determine channel (DCT) based on the interleaving mode: F10h BKDG, 2.8.9 Memory
* Interleaving Modes.
*/
@@ -1366,6 +1400,10 @@ static int f1x_lookup_addr_in_dct(u64 in_addr, u8 nid, u8 dct)
(in_addr & cs_mask), (cs_base & cs_mask));
if ((in_addr & cs_mask) == (cs_base & cs_mask)) {
+ if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+ cs_found = csrow;
+ break;
+ }
cs_found = f10_process_possible_spare(pvt, dct, csrow);
edac_dbg(1, " MATCH csrow=%d\n", cs_found);
@@ -1492,20 +1530,142 @@ static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
return cs_found;
}
-static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
- int *chan_sel)
+static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
+ u64 sys_addr, int *chan_sel)
+{
+ int cs_found = -EINVAL;
+ int num_dcts_intlv = 0;
+ u64 chan_addr, chan_offset;
+ u64 dct_base, dct_limit;
+ u32 dct_cont_base_reg, dct_cont_limit_reg, tmp;
+ u8 channel, alias_channel, leg_mmio_hole, dct_sel, dct_offset_en;
+
+ u64 dhar_offset = f10_dhar_offset(pvt);
+ u8 intlv_addr = dct_sel_interleave_addr(pvt);
+ u8 node_id = dram_dst_node(pvt, range);
+ u8 intlv_en = dram_intlv_en(pvt, range);
+
+ amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &dct_cont_base_reg);
+ amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &dct_cont_limit_reg);
+
+ dct_offset_en = (u8) ((dct_cont_base_reg >> 3) & BIT(0));
+ dct_sel = (u8) ((dct_cont_base_reg >> 4) & 0x7);
+
+ edac_dbg(1, "(range %d) SystemAddr= 0x%llx Limit=0x%llx\n",
+ range, sys_addr, get_dram_limit(pvt, range));
+
+ if (!(get_dram_base(pvt, range) <= sys_addr) &&
+ !(get_dram_limit(pvt, range) >= sys_addr))
+ return -EINVAL;
+
+ if (dhar_valid(pvt) &&
+ dhar_base(pvt) <= sys_addr &&
+ sys_addr < BIT_64(32)) {
+ amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n",
+ sys_addr);
+ return -EINVAL;
+ }
+
+ /* Verify sys_addr is within DCT Range. */
+ dct_base = (dct_sel_baseaddr(pvt) << 27);
+ dct_limit = (((dct_cont_limit_reg >> 11) & 0x1FFF) << 27) | 0x7FFFFFF;
+
+ if (!(dct_cont_base_reg & BIT(0)) &&
+ !(dct_base <= sys_addr && dct_limit >= sys_addr))
+ return -EINVAL;
+
+ /* Verify number of dct's that participate in channel interleaving. */
+ num_dcts_intlv = (int) hweight8(intlv_en);
+
+ if (!(num_dcts_intlv % 2 == 0) || (num_dcts_intlv > 4))
+ return -EINVAL;
+
+ channel = f15_m30h_determine_channel(pvt, sys_addr, intlv_en,
+ num_dcts_intlv, dct_sel);
+
+ /* Verify we stay within the MAX number of channels allowed */
+ if (channel > 4 || channel < 0)
+ return -EINVAL;
+
+ leg_mmio_hole = (u8) (dct_cont_base_reg >> 1 & BIT(0));
+
+ /* Get normalized DCT addr */
+ if (leg_mmio_hole && (sys_addr >= BIT_64(32)))
+ chan_offset = dhar_offset;
+ else
+ chan_offset = dct_base;
+
+ chan_addr = sys_addr - chan_offset;
+
+ /* remove channel interleave */
+ if (num_dcts_intlv == 2) {
+ if (intlv_addr == 0x4)
+ chan_addr = ((chan_addr >> 9) << 8) |
+ (chan_addr & 0xff);
+ else if (intlv_addr == 0x5)
+ chan_addr = ((chan_addr >> 10) << 9) |
+ (chan_addr & 0x1ff);
+ else
+ return -EINVAL;
+
+ } else if (num_dcts_intlv == 4) {
+ if (intlv_addr == 0x4)
+ chan_addr = ((chan_addr >> 10) << 8) |
+ (chan_addr & 0xff);
+ else if (intlv_addr == 0x5)
+ chan_addr = ((chan_addr >> 11) << 9) |
+ (chan_addr & 0x1ff);
+ else
+ return -EINVAL;
+ }
+
+ if (dct_offset_en) {
+ amd64_read_pci_cfg(pvt->F1,
+ DRAM_CONT_HIGH_OFF + (int) channel * 4,
+ &tmp);
+ chan_addr += ((tmp >> 11) & 0xfff) << 27;
+ }
+
+ f15h_select_dct(pvt, channel);
+
+ edac_dbg(1, " Normalized DCT addr: 0x%llx\n", chan_addr);
+
+ /*
+ * Find Chip select:
+ * if channel = 3, then alias it to 1. This is because, in F15 M30h,
+ * there is support for 4 DCT's, but only 2 are currently functional.
+ * They are DCT0 and DCT3. But we have read all registers of DCT3 into
+ * pvt->csels[1]. So we need to use '1' here to get correct info.
+ * Refer F15 M30h BKDG Section 2.10 and 2.10.3 for clarifications.
+ */
+ alias_channel = (channel == 3) ? 1 : channel;
+
+ cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, alias_channel);
+
+ if (cs_found >= 0)
+ *chan_sel = alias_channel;
+
+ return cs_found;
+}
+
+static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt,
+ u64 sys_addr,
+ int *chan_sel)
{
int cs_found = -EINVAL;
unsigned range;
for (range = 0; range < DRAM_RANGES; range++) {
-
if (!dram_rw(pvt, range))
continue;
- if ((get_dram_base(pvt, range) <= sys_addr) &&
- (get_dram_limit(pvt, range) >= sys_addr)) {
+ if (pvt->fam == 0x15 && pvt->model >= 0x30)
+ cs_found = f15_m30h_match_to_this_node(pvt, range,
+ sys_addr,
+ chan_sel);
+ else if ((get_dram_base(pvt, range) <= sys_addr) &&
+ (get_dram_limit(pvt, range) >= sys_addr)) {
cs_found = f1x_match_to_this_node(pvt, range,
sys_addr, chan_sel);
if (cs_found >= 0)
@@ -1624,6 +1784,17 @@ static struct amd64_family_type amd64_family_types[] = {
.read_dct_pci_cfg = f15_read_dct_pci_cfg,
}
},
+ [F15_M30H_CPUS] = {
+ .ctl_name = "F15h_M30h",
+ .f1_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1,
+ .f3_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F3,
+ .ops = {
+ .early_channel_count = f1x_early_channel_count,
+ .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
+ .dbam_to_cs = f16_dbam_to_chip_select,
+ .read_dct_pci_cfg = f15_read_dct_pci_cfg,
+ }
+ },
[F16_CPUS] = {
.ctl_name = "F16h",
.f1_id = PCI_DEVICE_ID_AMD_16H_NB_F1,
@@ -2387,10 +2558,13 @@ static void setup_mci_misc_attrs(struct mem_ctl_info *mci,
*/
static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt)
{
- u8 fam = boot_cpu_data.x86;
struct amd64_family_type *fam_type = NULL;
- switch (fam) {
+ pvt->ext_model = boot_cpu_data.x86_model >> 4;
+ pvt->model = boot_cpu_data.x86_model;
+ pvt->fam = boot_cpu_data.x86;
+
+ switch (pvt->fam) {
case 0xf:
fam_type = &amd64_family_types[K8_CPUS];
pvt->ops = &amd64_family_types[K8_CPUS].ops;
@@ -2402,6 +2576,12 @@ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt)
break;
case 0x15:
+ if (pvt->model == 0x30) {
+ fam_type = &amd64_family_types[F15_M30H_CPUS];
+ pvt->ops = &amd64_family_types[F15_M30H_CPUS].ops;
+ break;
+ }
+
fam_type = &amd64_family_types[F15_CPUS];
pvt->ops = &amd64_family_types[F15_CPUS].ops;
break;
@@ -2416,10 +2596,8 @@ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt)
return NULL;
}
- pvt->ext_model = boot_cpu_data.x86_model >> 4;
-
amd64_info("%s %sdetected (node %d).\n", fam_type->ctl_name,
- (fam == 0xf ?
+ (pvt->fam == 0xf ?
(pvt->ext_model >= K8_REV_F ? "revF or later "
: "revE or earlier ")
: ""), pvt->mc_node_id);
@@ -2638,6 +2816,14 @@ static DEFINE_PCI_DEVICE_TABLE(amd64_pci_table) = {
},
{
.vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_15H_M30H_NB_F2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = 0,
+ .class_mask = 0,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_16H_NB_F2,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
OpenPOWER on IntegriCloud