1 files changed, 105 insertions, 196 deletions

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 9bc37c437874..f951f911786e 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -31,9 +31,8 @@
 
 struct private_data {
 	struct device *cpu_dev;
-	struct regulator *cpu_reg;
 	struct thermal_cooling_device *cdev;
-	unsigned int voltage_tolerance; /* in percentage */
+	const char *reg_name;
 };
 
 static struct freq_attr *cpufreq_dt_attr[] = {
@@ -44,176 +43,128 @@ static struct freq_attr *cpufreq_dt_attr[] = {
 
 static int set_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct dev_pm_opp *opp;
-	struct cpufreq_frequency_table *freq_table = policy->freq_table;
-	struct clk *cpu_clk = policy->clk;
 	struct private_data *priv = policy->driver_data;
-	struct device *cpu_dev = priv->cpu_dev;
-	struct regulator *cpu_reg = priv->cpu_reg;
-	unsigned long volt = 0, tol = 0;
-	int volt_old = 0;
-	unsigned int old_freq, new_freq;
-	long freq_Hz, freq_exact;
-	int ret;
-
-	freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
-	if (freq_Hz <= 0)
-		freq_Hz = freq_table[index].frequency * 1000;
 
-	freq_exact = freq_Hz;
-	new_freq = freq_Hz / 1000;
-	old_freq = clk_get_rate(cpu_clk) / 1000;
+	return dev_pm_opp_set_rate(priv->cpu_dev,
+				   policy->freq_table[index].frequency * 1000);
+}
 
-	if (!IS_ERR(cpu_reg)) {
-		unsigned long opp_freq;
+/*
+ * An earlier version of opp-v1 bindings used to name the regulator
+ * "cpu0-supply", we still need to handle that for backwards compatibility.
+ */
+static const char *find_supply_name(struct device *dev)
+{
+	struct device_node *np;
+	struct property *pp;
+	int cpu = dev->id;
+	const char *name = NULL;
 
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
-		if (IS_ERR(opp)) {
-			rcu_read_unlock();
-			dev_err(cpu_dev, "failed to find OPP for %ld\n",
-				freq_Hz);
-			return PTR_ERR(opp);
-		}
-		volt = dev_pm_opp_get_voltage(opp);
-		opp_freq = dev_pm_opp_get_freq(opp);
-		rcu_read_unlock();
-		tol = volt * priv->voltage_tolerance / 100;
-		volt_old = regulator_get_voltage(cpu_reg);
-		dev_dbg(cpu_dev, "Found OPP: %ld kHz, %ld uV\n",
-			opp_freq / 1000, volt);
-	}
+	np = of_node_get(dev->of_node);
 
-	dev_dbg(cpu_dev, "%u MHz, %d mV --> %u MHz, %ld mV\n",
-		old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1,
-		new_freq / 1000, volt ? volt / 1000 : -1);
+	/* This must be valid for sure */
+	if (WARN_ON(!np))
+		return NULL;
 
-	/* scaling up?  scale voltage before frequency */
-	if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
-		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-		if (ret) {
-			dev_err(cpu_dev, "failed to scale voltage up: %d\n",
-				ret);
-			return ret;
+	/* Try "cpu0" for older DTs */
+	if (!cpu) {
+		pp = of_find_property(np, "cpu0-supply", NULL);
+		if (pp) {
+			name = "cpu0";
+			goto node_put;
 		}
 	}
 
-	ret = clk_set_rate(cpu_clk, freq_exact);
-	if (ret) {
-		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
-		if (!IS_ERR(cpu_reg) && volt_old > 0)
-			regulator_set_voltage_tol(cpu_reg, volt_old, tol);
-		return ret;
+	pp = of_find_property(np, "cpu-supply", NULL);
+	if (pp) {
+		name = "cpu";
+		goto node_put;
 	}
 
-	/* scaling down?  scale voltage after frequency */
-	if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
-		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
-		if (ret) {
-			dev_err(cpu_dev, "failed to scale voltage down: %d\n",
-				ret);
-			clk_set_rate(cpu_clk, old_freq * 1000);
-		}
-	}
-
-	return ret;
+	dev_dbg(dev, "no regulator for cpu%d\n", cpu);
+node_put:
+	of_node_put(np);
+	return name;
 }
 
-static int allocate_resources(int cpu, struct device **cdev,
-			      struct regulator **creg, struct clk **cclk)
+static int resources_available(void)
 {
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
 	int ret = 0;
-	char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg;
+	const char *name;
 
-	cpu_dev = get_cpu_device(cpu);
+	cpu_dev = get_cpu_device(0);
 	if (!cpu_dev) {
-		pr_err("failed to get cpu%d device\n", cpu);
+		pr_err("failed to get cpu0 device\n");
 		return -ENODEV;
 	}
 
-	/* Try "cpu0" for older DTs */
-	if (!cpu)
-		reg = reg_cpu0;
-	else
-		reg = reg_cpu;
-
-try_again:
-	cpu_reg = regulator_get_optional(cpu_dev, reg);
-	if (IS_ERR(cpu_reg)) {
+	cpu_clk = clk_get(cpu_dev, NULL);
+	ret = PTR_ERR_OR_ZERO(cpu_clk);
+	if (ret) {
 		/*
-		 * If cpu's regulator supply node is present, but regulator is
-		 * not yet registered, we should try defering probe.
+		 * If cpu's clk node is present, but clock is not yet
+		 * registered, we should try defering probe.
 		 */
-		if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
-			dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n",
-				cpu);
-			return -EPROBE_DEFER;
-		}
-
-		/* Try with "cpu-supply" */
-		if (reg == reg_cpu0) {
-			reg = reg_cpu;
-			goto try_again;
-		}
+		if (ret == -EPROBE_DEFER)
+			dev_dbg(cpu_dev, "clock not ready, retry\n");
+		else
+			dev_err(cpu_dev, "failed to get clock: %d\n", ret);
 
-		dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n",
-			cpu, PTR_ERR(cpu_reg));
+		return ret;
 	}
 
-	cpu_clk = clk_get(cpu_dev, NULL);
-	if (IS_ERR(cpu_clk)) {
-		/* put regulator */
-		if (!IS_ERR(cpu_reg))
-			regulator_put(cpu_reg);
+	clk_put(cpu_clk);
 
-		ret = PTR_ERR(cpu_clk);
+	name = find_supply_name(cpu_dev);
+	/* Platform doesn't require regulator */
+	if (!name)
+		return 0;
 
+	cpu_reg = regulator_get_optional(cpu_dev, name);
+	ret = PTR_ERR_OR_ZERO(cpu_reg);
+	if (ret) {
 		/*
-		 * If cpu's clk node is present, but clock is not yet
-		 * registered, we should try defering probe.
+		 * If cpu's regulator supply node is present, but regulator is
+		 * not yet registered, we should try defering probe.
 		 */
 		if (ret == -EPROBE_DEFER)
-			dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu);
+			dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
 		else
-			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu,
-				ret);
-	} else {
-		*cdev = cpu_dev;
-		*creg = cpu_reg;
-		*cclk = cpu_clk;
+			dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
+
+		return ret;
 	}
 
-	return ret;
+	regulator_put(cpu_reg);
+	return 0;
 }
 
 static int cpufreq_init(struct cpufreq_policy *policy)
 {
 	struct cpufreq_frequency_table *freq_table;
-	struct device_node *np;
 	struct private_data *priv;
 	struct device *cpu_dev;
-	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
 	struct dev_pm_opp *suspend_opp;
-	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
-	bool need_update = false;
+	bool opp_v1 = false;
+	const char *name;
 	int ret;
 
-	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
-	if (ret) {
-		pr_err("%s: Failed to allocate resources: %d\n", __func__, ret);
-		return ret;
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		pr_err("failed to get cpu%d device\n", policy->cpu);
+		return -ENODEV;
 	}
 
-	np = of_node_get(cpu_dev->of_node);
-	if (!np) {
-		dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu);
-		ret = -ENOENT;
-		goto out_put_reg_clk;
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		ret = PTR_ERR(cpu_clk);
+		dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret);
+		return ret;
 	}
 
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
@@ -224,9 +175,23 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		 * finding shared-OPPs for backward compatibility.
 		 */
 		if (ret == -ENOENT)
-			need_update = true;
+			opp_v1 = true;
 		else
-			goto out_node_put;
+			goto out_put_clk;
+	}
+
+	/*
+	 * OPP layer will be taking care of regulators now, but it needs to know
+	 * the name of the regulator first.
+	 */
+	name = find_supply_name(cpu_dev);
+	if (name) {
+		ret = dev_pm_opp_set_regulator(cpu_dev, name);
+		if (ret) {
+			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
+				policy->cpu, ret);
+			goto out_put_clk;
+		}
 	}
 
 	/*
@@ -247,12 +212,12 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 */
 	ret = dev_pm_opp_get_opp_count(cpu_dev);
 	if (ret <= 0) {
-		pr_debug("OPP table is not ready, deferring probe\n");
+		dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
 		ret = -EPROBE_DEFER;
 		goto out_free_opp;
 	}
 
-	if (need_update) {
+	if (opp_v1) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
 
 		if (!pd || !pd->independent_clocks)
@@ -266,10 +231,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		if (ret)
 			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
 				__func__, ret);
-
-		of_property_read_u32(np, "clock-latency", &transition_latency);
-	} else {
-		transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev);
 	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -278,62 +239,16 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		goto out_free_opp;
 	}
 
-	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
-
-	if (!transition_latency)
-		transition_latency = CPUFREQ_ETERNAL;
-
-	if (!IS_ERR(cpu_reg)) {
-		unsigned long opp_freq = 0;
-
-		/*
-		 * Disable any OPPs where the connected regulator isn't able to
-		 * provide the specified voltage and record minimum and maximum
-		 * voltage levels.
-		 */
-		while (1) {
-			struct dev_pm_opp *opp;
-			unsigned long opp_uV, tol_uV;
-
-			rcu_read_lock();
-			opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq);
-			if (IS_ERR(opp)) {
-				rcu_read_unlock();
-				break;
-			}
-			opp_uV = dev_pm_opp_get_voltage(opp);
-			rcu_read_unlock();
-
-			tol_uV = opp_uV * priv->voltage_tolerance / 100;
-			if (regulator_is_supported_voltage(cpu_reg,
-							   opp_uV - tol_uV,
-							   opp_uV + tol_uV)) {
-				if (opp_uV < min_uV)
-					min_uV = opp_uV;
-				if (opp_uV > max_uV)
-					max_uV = opp_uV;
-			} else {
-				dev_pm_opp_disable(cpu_dev, opp_freq);
-			}
-
-			opp_freq++;
-		}
-
-		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
-		if (ret > 0)
-			transition_latency += ret * 1000;
-	}
+	priv->reg_name = name;
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
-		pr_err("failed to init cpufreq table: %d\n", ret);
+		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
 		goto out_free_priv;
 	}
 
 	priv->cpu_dev = cpu_dev;
-	priv->cpu_reg = cpu_reg;
 	policy->driver_data = priv;
-
 	policy->clk = cpu_clk;
 
 	rcu_read_lock();
@@ -358,9 +273,11 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
 	}
 
-	policy->cpuinfo.transition_latency = transition_latency;
+	transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev);
+	if (!transition_latency)
+		transition_latency = CPUFREQ_ETERNAL;
 
-	of_node_put(np);
+	policy->cpuinfo.transition_latency = transition_latency;
 
 	return 0;
 
@@ -370,12 +287,10 @@ out_free_priv:
 	kfree(priv);
 out_free_opp:
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
-out_node_put:
-	of_node_put(np);
-out_put_reg_clk:
+	if (name)
+		dev_pm_opp_put_regulator(cpu_dev);
+out_put_clk:
 	clk_put(cpu_clk);
-	if (!IS_ERR(cpu_reg))
-		regulator_put(cpu_reg);
 
 	return ret;
 }
@@ -387,9 +302,10 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
+	if (priv->reg_name)
+		dev_pm_opp_put_regulator(priv->cpu_dev);
+
 	clk_put(policy->clk);
-	if (!IS_ERR(priv->cpu_reg))
-		regulator_put(priv->cpu_reg);
 	kfree(priv);
 
 	return 0;
@@ -442,9 +358,6 @@ static struct cpufreq_driver dt_cpufreq_driver = {
 
 static int dt_cpufreq_probe(struct platform_device *pdev)
 {
-	struct device *cpu_dev;
-	struct regulator *cpu_reg;
-	struct clk *cpu_clk;
 	int ret;
 
 	/*
@@ -454,19 +367,15 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
 	 *
 	 * FIXME: Is checking this only for CPU0 sufficient ?
 	 */
-	ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk);
+	ret = resources_available();
 	if (ret)
 		return ret;
 
-	clk_put(cpu_clk);
-	if (!IS_ERR(cpu_reg))
-		regulator_put(cpu_reg);
-
 	dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev);
 
 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
 	if (ret)
-		dev_err(cpu_dev, "failed register driver: %d\n", ret);
+		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
 
 	return ret;
 }