diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/clocksource/arm_arch_timer.c | 113 | ||||
| -rw-r--r-- | drivers/clocksource/mips-gic-timer.c | 7 | ||||
| -rw-r--r-- | drivers/clocksource/moxart_timer.c | 193 | ||||
| -rw-r--r-- | drivers/clocksource/timer-atmel-pit.c | 95 | ||||
| -rw-r--r-- | drivers/clocksource/timer-oxnas-rps.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/timer-ti-32k.c | 2 |
7 files changed, 290 insertions, 132 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index ec443c318c77..245190839359 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -305,6 +305,16 @@ config ARM_ARCH_TIMER_EVTSTREAM This must be disabled for hardware validation purposes to detect any hardware anomalies of missing events. +config FSL_ERRATUM_A008585 + bool "Workaround for Freescale/NXP Erratum A-008585" + default y + depends on ARM_ARCH_TIMER && ARM64 + help + This option enables a workaround for Freescale/NXP Erratum + A-008585 ("ARM generic timer may contain an erroneous + value"). The workaround will only be active if the + fsl,erratum-a008585 property is found in the timer node. + config ARM_GLOBAL_TIMER bool "Support for the ARM global timer" if COMPILE_TEST select CLKSRC_OF if OF diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 57700541f951..73c487da6d2a 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -94,6 +94,43 @@ early_param("clocksource.arm_arch_timer.evtstrm", early_evtstrm_cfg); * Architected system timer support. */ +#ifdef CONFIG_FSL_ERRATUM_A008585 +DEFINE_STATIC_KEY_FALSE(arch_timer_read_ool_enabled); +EXPORT_SYMBOL_GPL(arch_timer_read_ool_enabled); + +static int fsl_a008585_enable = -1; + +static int __init early_fsl_a008585_cfg(char *buf) +{ + int ret; + bool val; + + ret = strtobool(buf, &val); + if (ret) + return ret; + + fsl_a008585_enable = val; + return 0; +} +early_param("clocksource.arm_arch_timer.fsl-a008585", early_fsl_a008585_cfg); + +u32 __fsl_a008585_read_cntp_tval_el0(void) +{ + return __fsl_a008585_read_reg(cntp_tval_el0); +} + +u32 __fsl_a008585_read_cntv_tval_el0(void) +{ + return __fsl_a008585_read_reg(cntv_tval_el0); +} + +u64 __fsl_a008585_read_cntvct_el0(void) +{ + return __fsl_a008585_read_reg(cntvct_el0); +} +EXPORT_SYMBOL(__fsl_a008585_read_cntvct_el0); +#endif /* CONFIG_FSL_ERRATUM_A008585 */ + static __always_inline void arch_timer_reg_write(int access, enum arch_timer_reg reg, u32 val, struct clock_event_device *clk) @@ -243,6 +280,40 @@ static __always_inline void set_next_event(const int access, unsigned long evt, arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk); } +#ifdef CONFIG_FSL_ERRATUM_A008585 +static __always_inline void fsl_a008585_set_next_event(const int access, + unsigned long evt, struct clock_event_device *clk) +{ + unsigned long ctrl; + u64 cval = evt + arch_counter_get_cntvct(); + + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk); + ctrl |= ARCH_TIMER_CTRL_ENABLE; + ctrl &= ~ARCH_TIMER_CTRL_IT_MASK; + + if (access == ARCH_TIMER_PHYS_ACCESS) + write_sysreg(cval, cntp_cval_el0); + else if (access == ARCH_TIMER_VIRT_ACCESS) + write_sysreg(cval, cntv_cval_el0); + + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk); +} + +static int fsl_a008585_set_next_event_virt(unsigned long evt, + struct clock_event_device *clk) +{ + fsl_a008585_set_next_event(ARCH_TIMER_VIRT_ACCESS, evt, clk); + return 0; +} + +static int fsl_a008585_set_next_event_phys(unsigned long evt, + struct clock_event_device *clk) +{ + fsl_a008585_set_next_event(ARCH_TIMER_PHYS_ACCESS, evt, clk); + return 0; +} +#endif /* CONFIG_FSL_ERRATUM_A008585 */ + static int arch_timer_set_next_event_virt(unsigned long evt, struct clock_event_device *clk) { @@ -271,6 +342,19 @@ static int arch_timer_set_next_event_phys_mem(unsigned long evt, return 0; } +static void fsl_a008585_set_sne(struct clock_event_device *clk) +{ +#ifdef CONFIG_FSL_ERRATUM_A008585 + if (!static_branch_unlikely(&arch_timer_read_ool_enabled)) + return; + + if (arch_timer_uses_ppi == VIRT_PPI) + clk->set_next_event = fsl_a008585_set_next_event_virt; + else + clk->set_next_event = fsl_a008585_set_next_event_phys; +#endif +} + static void __arch_timer_setup(unsigned type, struct clock_event_device *clk) { @@ -299,6 +383,8 @@ static void __arch_timer_setup(unsigned type, default: BUG(); } + + fsl_a008585_set_sne(clk); } else { clk->features |= CLOCK_EVT_FEAT_DYNIRQ; clk->name = "arch_mem_timer"; @@ -515,15 +601,19 @@ static void __init arch_counter_register(unsigned type) arch_timer_read_counter = arch_counter_get_cntvct; else arch_timer_read_counter = arch_counter_get_cntpct; - } else { - arch_timer_read_counter = arch_counter_get_cntvct_mem; - /* If the clocksource name is "arch_sys_counter" the - * VDSO will attempt to read the CP15-based counter. - * Ensure this does not happen when CP15-based - * counter is not available. + clocksource_counter.archdata.vdso_direct = true; + +#ifdef CONFIG_FSL_ERRATUM_A008585 + /* + * Don't use the vdso fastpath if errata require using + * the out-of-line counter accessor. */ - clocksource_counter.name = "arch_mem_counter"; + if (static_branch_unlikely(&arch_timer_read_ool_enabled)) + clocksource_counter.archdata.vdso_direct = false; +#endif + } else { + arch_timer_read_counter = arch_counter_get_cntvct_mem; } start_count = arch_timer_read_counter(); @@ -800,6 +890,15 @@ static int __init arch_timer_of_init(struct device_node *np) arch_timer_c3stop = !of_property_read_bool(np, "always-on"); +#ifdef CONFIG_FSL_ERRATUM_A008585 + if (fsl_a008585_enable < 0) + fsl_a008585_enable = of_property_read_bool(np, "fsl,erratum-a008585"); + if (fsl_a008585_enable) { + static_branch_enable(&arch_timer_read_ool_enabled); + pr_info("Enabling workaround for FSL erratum A-008585\n"); + } +#endif + /* * If we cannot rely on firmware initializing the timer registers then * we should use the physical timers instead. diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c index b4b3ab5a11ad..7a960cd01104 100644 --- a/drivers/clocksource/mips-gic-timer.c +++ b/drivers/clocksource/mips-gic-timer.c @@ -109,12 +109,15 @@ static int gic_clockevent_init(void) { int ret; - if (!cpu_has_counter || !gic_frequency) + if (!gic_frequency) return -ENXIO; ret = setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction); - if (ret < 0) + if (ret < 0) { + pr_err("GIC timer IRQ %d setup failed: %d\n", + gic_timer_irq, ret); return ret; + } cpuhp_setup_state(CPUHP_AP_MIPS_GIC_TIMER_STARTING, "AP_MIPS_GIC_TIMER_STARTING", gic_starting_cpu, diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c index 841454417acd..2a8f4705c734 100644 --- a/drivers/clocksource/moxart_timer.c +++ b/drivers/clocksource/moxart_timer.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/clocksource.h> #include <linux/bitops.h> +#include <linux/slab.h> #define TIMER1_BASE 0x00 #define TIMER2_BASE 0x10 @@ -36,75 +37,109 @@ #define TIMER_INTR_MASK 0x38 /* - * TIMER_CR flags: + * Moxart TIMER_CR flags: * - * TIMEREG_CR_*_CLOCK 0: PCLK, 1: EXT1CLK - * TIMEREG_CR_*_INT overflow interrupt enable bit + * MOXART_CR_*_CLOCK 0: PCLK, 1: EXT1CLK + * MOXART_CR_*_INT overflow interrupt enable bit */ -#define TIMEREG_CR_1_ENABLE BIT(0) -#define TIMEREG_CR_1_CLOCK BIT(1) -#define TIMEREG_CR_1_INT BIT(2) -#define TIMEREG_CR_2_ENABLE BIT(3) -#define TIMEREG_CR_2_CLOCK BIT(4) -#define TIMEREG_CR_2_INT BIT(5) -#define TIMEREG_CR_3_ENABLE BIT(6) -#define TIMEREG_CR_3_CLOCK BIT(7) -#define TIMEREG_CR_3_INT BIT(8) -#define TIMEREG_CR_COUNT_UP BIT(9) - -#define TIMER1_ENABLE (TIMEREG_CR_2_ENABLE | TIMEREG_CR_1_ENABLE) -#define TIMER1_DISABLE (TIMEREG_CR_2_ENABLE) - -static void __iomem *base; -static unsigned int clock_count_per_tick; +#define MOXART_CR_1_ENABLE BIT(0) +#define MOXART_CR_1_CLOCK BIT(1) +#define MOXART_CR_1_INT BIT(2) +#define MOXART_CR_2_ENABLE BIT(3) +#define MOXART_CR_2_CLOCK BIT(4) +#define MOXART_CR_2_INT BIT(5) +#define MOXART_CR_3_ENABLE BIT(6) +#define MOXART_CR_3_CLOCK BIT(7) +#define MOXART_CR_3_INT BIT(8) +#define MOXART_CR_COUNT_UP BIT(9) + +#define MOXART_TIMER1_ENABLE (MOXART_CR_2_ENABLE | MOXART_CR_1_ENABLE) +#define MOXART_TIMER1_DISABLE (MOXART_CR_2_ENABLE) + +/* + * The ASpeed variant of the IP block has a different layout + * for the control register + */ +#define ASPEED_CR_1_ENABLE BIT(0) +#define ASPEED_CR_1_CLOCK BIT(1) +#define ASPEED_CR_1_INT BIT(2) +#define ASPEED_CR_2_ENABLE BIT(4) +#define ASPEED_CR_2_CLOCK BIT(5) +#define ASPEED_CR_2_INT BIT(6) +#define ASPEED_CR_3_ENABLE BIT(8) +#define ASPEED_CR_3_CLOCK BIT(9) +#define ASPEED_CR_3_INT BIT(10) + +#define ASPEED_TIMER1_ENABLE (ASPEED_CR_2_ENABLE | ASPEED_CR_1_ENABLE) +#define ASPEED_TIMER1_DISABLE (ASPEED_CR_2_ENABLE) + +struct moxart_timer { + void __iomem *base; + unsigned int t1_disable_val; + unsigned int t1_enable_val; + unsigned int count_per_tick; + struct clock_event_device clkevt; +}; + +static inline struct moxart_timer *to_moxart(struct clock_event_device *evt) +{ + return container_of(evt, struct moxart_timer, clkevt); +} + +static inline void moxart_disable(struct clock_event_device *evt) +{ + struct moxart_timer *timer = to_moxart(evt); + + writel(timer->t1_disable_val, timer->base + TIMER_CR); +} + +static inline void moxart_enable(struct clock_event_device *evt) +{ + struct moxart_timer *timer = to_moxart(evt); + + writel(timer->t1_enable_val, timer->base + TIMER_CR); +} static int moxart_shutdown(struct clock_event_device *evt) { - writel(TIMER1_DISABLE, base + TIMER_CR); + moxart_disable(evt); return 0; } static int moxart_set_oneshot(struct clock_event_device *evt) { - writel(TIMER1_DISABLE, base + TIMER_CR); - writel(~0, base + TIMER1_BASE + REG_LOAD); + moxart_disable(evt); + writel(~0, to_moxart(evt)->base + TIMER1_BASE + REG_LOAD); return 0; } static int moxart_set_periodic(struct clock_event_device *evt) { - writel(clock_count_per_tick, base + TIMER1_BASE + REG_LOAD); - writel(TIMER1_ENABLE, base + TIMER_CR); + struct moxart_timer *timer = to_moxart(evt); + + moxart_disable(evt); + writel(timer->count_per_tick, timer->base + TIMER1_BASE + REG_LOAD); + writel(0, timer->base + TIMER1_BASE + REG_MATCH1); + moxart_enable(evt); return 0; } static int moxart_clkevt_next_event(unsigned long cycles, - struct clock_event_device *unused) + struct clock_event_device *evt) { + struct moxart_timer *timer = to_moxart(evt); u32 u; - writel(TIMER1_DISABLE, base + TIMER_CR); + moxart_disable(evt); - u = readl(base + TIMER1_BASE + REG_COUNT) - cycles; - writel(u, base + TIMER1_BASE + REG_MATCH1); + u = readl(timer->base + TIMER1_BASE + REG_COUNT) - cycles; + writel(u, timer->base + TIMER1_BASE + REG_MATCH1); - writel(TIMER1_ENABLE, base + TIMER_CR); + moxart_enable(evt); return 0; } -static struct clock_event_device moxart_clockevent = { - .name = "moxart_timer", - .rating = 200, - .features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT, - .set_state_shutdown = moxart_shutdown, - .set_state_periodic = moxart_set_periodic, - .set_state_oneshot = moxart_set_oneshot, - .tick_resume = moxart_set_oneshot, - .set_next_event = moxart_clkevt_next_event, -}; - static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = dev_id; @@ -112,21 +147,19 @@ static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction moxart_timer_irq = { - .name = "moxart-timer", - .flags = IRQF_TIMER, - .handler = moxart_timer_interrupt, - .dev_id = &moxart_clockevent, -}; - static int __init moxart_timer_init(struct device_node *node) { int ret, irq; unsigned long pclk; struct clk *clk; + struct moxart_timer *timer; + + timer = kzalloc(sizeof(*timer), GFP_KERNEL); + if (!timer) + return -ENOMEM; - base = of_iomap(node, 0); - if (!base) { + timer->base = of_iomap(node, 0); + if (!timer->base) { pr_err("%s: of_iomap failed\n", node->full_name); return -ENXIO; } @@ -137,12 +170,6 @@ static int __init moxart_timer_init(struct device_node *node) return -EINVAL; } - ret = setup_irq(irq, &moxart_timer_irq); - if (ret) { - pr_err("%s: setup_irq failed\n", node->full_name); - return ret; - } - clk = of_clk_get(node, 0); if (IS_ERR(clk)) { pr_err("%s: of_clk_get failed\n", node->full_name); @@ -151,7 +178,32 @@ static int __init moxart_timer_init(struct device_node *node) pclk = clk_get_rate(clk); - ret = clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT, + if (of_device_is_compatible(node, "moxa,moxart-timer")) { + timer->t1_enable_val = MOXART_TIMER1_ENABLE; + timer->t1_disable_val = MOXART_TIMER1_DISABLE; + } else if (of_device_is_compatible(node, "aspeed,ast2400-timer")) { + timer->t1_enable_val = ASPEED_TIMER1_ENABLE; + timer->t1_disable_val = ASPEED_TIMER1_DISABLE; + } else { + pr_err("%s: unknown platform\n", node->full_name); + return -EINVAL; + } + + timer->count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ); + + timer->clkevt.name = node->name; + timer->clkevt.rating = 200; + timer->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT; + timer->clkevt.set_state_shutdown = moxart_shutdown; + timer->clkevt.set_state_periodic = moxart_set_periodic; + timer->clkevt.set_state_oneshot = moxart_set_oneshot; + timer->clkevt.tick_resume = moxart_set_oneshot; + timer->clkevt.set_next_event = moxart_clkevt_next_event; + timer->clkevt.cpumask = cpumask_of(0); + timer->clkevt.irq = irq; + + ret = clocksource_mmio_init(timer->base + TIMER2_BASE + REG_COUNT, "moxart_timer", pclk, 200, 32, clocksource_mmio_readl_down); if (ret) { @@ -159,13 +211,26 @@ static int __init moxart_timer_init(struct device_node *node) return ret; } - clock_count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ); + ret = request_irq(irq, moxart_timer_interrupt, IRQF_TIMER, + node->name, &timer->clkevt); + if (ret) { + pr_err("%s: setup_irq failed\n", node->full_name); + return ret; + } - writel(~0, base + TIMER2_BASE + REG_LOAD); - writel(TIMEREG_CR_2_ENABLE, base + TIMER_CR); + /* Clear match registers */ + writel(0, timer->base + TIMER1_BASE + REG_MATCH1); + writel(0, timer->base + TIMER1_BASE + REG_MATCH2); + writel(0, timer->base + TIMER2_BASE + REG_MATCH1); + writel(0, timer->base + TIMER2_BASE + REG_MATCH2); - moxart_clockevent.cpumask = cpumask_of(0); - moxart_clockevent.irq = irq; + /* + * Start timer 2 rolling as our main wall clock source, keep timer 1 + * disabled + */ + writel(0, timer->base + TIMER_CR); + writel(~0, timer->base + TIMER2_BASE + REG_LOAD); + writel(timer->t1_disable_val, timer->base + TIMER_CR); /* * documentation is not publicly available: @@ -173,9 +238,9 @@ static int __init moxart_timer_init(struct device_node *node) * max_delta 0xfffffffe should be ok because count * register size is u32 */ - clockevents_config_and_register(&moxart_clockevent, pclk, - 0x4, 0xfffffffe); + clockevents_config_and_register(&timer->clkevt, pclk, 0x4, 0xfffffffe); return 0; } CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init); +CLOCKSOURCE_OF_DECLARE(aspeed, "aspeed,ast2400-timer", moxart_timer_init); diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c index 3494bc5a21d5..6555821bbdae 100644 --- a/drivers/clocksource/timer-atmel-pit.c +++ b/drivers/clocksource/timer-atmel-pit.c @@ -149,24 +149,13 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) { struct pit_data *data = dev_id; - /* - * irqs should be disabled here, but as the irq is shared they are only - * guaranteed to be off if the timer irq is registered first. - */ - WARN_ON_ONCE(!irqs_disabled()); - /* The PIT interrupt may be disabled, and is shared */ if (clockevent_state_periodic(&data->clkevt) && (pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) { - unsigned nr_ticks; - /* Get number of ticks performed before irq, and ack it */ - nr_ticks = PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR)); - do { - data->cnt += data->cycle; - data->clkevt.event_handler(&data->clkevt); - nr_ticks--; - } while (nr_ticks); + data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, + AT91_PIT_PIVR)); + data->clkevt.event_handler(&data->clkevt); return IRQ_HANDLED; } @@ -177,11 +166,41 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) /* * Set up both clocksource and clockevent support. */ -static int __init at91sam926x_pit_common_init(struct pit_data *data) +static int __init at91sam926x_pit_dt_init(struct device_node *node) { - unsigned long pit_rate; - unsigned bits; - int ret; + unsigned long pit_rate; + unsigned bits; + int ret; + struct pit_data *data; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->base = of_iomap(node, 0); + if (!data->base) { + pr_err("Could not map PIT address\n"); + return -ENXIO; + } + + data->mck = of_clk_get(node, 0); + if (IS_ERR(data->mck)) { + pr_err("Unable to get mck clk\n"); + return PTR_ERR(data->mck); + } + + ret = clk_prepare_enable(data->mck); + if (ret) { + pr_err("Unable to enable mck\n"); + return ret; + } + + /* Get the interrupts property */ + data->irq = irq_of_parse_and_map(node, 0); + if (!data->irq) { + pr_err("Unable to get IRQ from DT\n"); + return -EINVAL; + } /* * Use our actual MCK to figure out how many MCK/16 ticks per @@ -236,45 +255,5 @@ static int __init at91sam926x_pit_common_init(struct pit_data *data) return 0; } - -static int __init at91sam926x_pit_dt_init(struct device_node *node) -{ - struct pit_data *data; - - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->base = of_iomap(node, 0); - if (!data->base) { - pr_err("Could not map PIT address\n"); - return -ENXIO; - } - - data->mck = of_clk_get(node, 0); - if (IS_ERR(data->mck)) - /* Fallback on clkdev for !CCF-based boards */ - data->mck = clk_get(NULL, "mck"); - - if (IS_ERR(data->mck)) { - pr_err("Unable to get mck clk\n"); - return PTR_ERR(data->mck); - } - - ret = clk_prepare_enable(data->mck); - if (ret) { - pr_err("Unable to enable mck\n"); - return ret; - } - - /* Get the interrupts property */ - data->irq = irq_of_parse_and_map(node, 0); - if (!data->irq) { - pr_err("Unable to get IRQ from DT\n"); - return -EINVAL; - } - - return at91sam926x_pit_common_init(data); -} CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit", at91sam926x_pit_dt_init); diff --git a/drivers/clocksource/timer-oxnas-rps.c b/drivers/clocksource/timer-oxnas-rps.c index bd887e2a8cf8..d630bf417773 100644 --- a/drivers/clocksource/timer-oxnas-rps.c +++ b/drivers/clocksource/timer-oxnas-rps.c @@ -295,3 +295,5 @@ err_alloc: CLOCKSOURCE_OF_DECLARE(ox810se_rps, "oxsemi,ox810se-rps-timer", oxnas_rps_timer_init); +CLOCKSOURCE_OF_DECLARE(ox820_rps, + "oxsemi,ox820se-rps-timer", oxnas_rps_timer_init); diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c index 92b7e390f6c8..cf5b14e442e4 100644 --- a/drivers/clocksource/timer-ti-32k.c +++ b/drivers/clocksource/timer-ti-32k.c @@ -65,7 +65,7 @@ static inline struct ti_32k *to_ti_32k(struct clocksource *cs) return container_of(cs, struct ti_32k, cs); } -static cycle_t ti_32k_read_cycles(struct clocksource *cs) +static cycle_t notrace ti_32k_read_cycles(struct clocksource *cs) { struct ti_32k *ti = to_ti_32k(cs); |
