diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/cyclone.c | 113 |
2 files changed, 0 insertions, 114 deletions
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index aed3488d9426..f3fe4cb4974b 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -1,6 +1,5 @@ obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o -obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c deleted file mode 100644 index 9e0998f22885..000000000000 --- a/drivers/clocksource/cyclone.c +++ /dev/null @@ -1,113 +0,0 @@ -#include <linux/clocksource.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/timex.h> -#include <linux/init.h> - -#include <asm/pgtable.h> -#include <asm/io.h> - -#include <asm/mach_timer.h> - -#define CYCLONE_CBAR_ADDR 0xFEB00CD0 /* base address ptr */ -#define CYCLONE_PMCC_OFFSET 0x51A0 /* offset to control register */ -#define CYCLONE_MPCS_OFFSET 0x51A8 /* offset to select register */ -#define CYCLONE_MPMC_OFFSET 0x51D0 /* offset to count register */ -#define CYCLONE_TIMER_FREQ 99780000 /* 100Mhz, but not really */ -#define CYCLONE_TIMER_MASK CLOCKSOURCE_MASK(32) /* 32 bit mask */ - -int use_cyclone = 0; -static void __iomem *cyclone_ptr; - -static cycle_t read_cyclone(struct clocksource *cs) -{ - return (cycle_t)readl(cyclone_ptr); -} - -static struct clocksource clocksource_cyclone = { - .name = "cyclone", - .rating = 250, - .read = read_cyclone, - .mask = CYCLONE_TIMER_MASK, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init init_cyclone_clocksource(void) -{ - unsigned long base; /* saved value from CBAR */ - unsigned long offset; - u32 __iomem* volatile cyclone_timer; /* Cyclone MPMC0 register */ - u32 __iomem* reg; - int i; - - /* make sure we're on a summit box: */ - if (!use_cyclone) - return -ENODEV; - - printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); - - /* find base address: */ - offset = CYCLONE_CBAR_ADDR; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n"); - return -ENODEV; - } - /* even on 64bit systems, this is only 32bits: */ - base = readl(reg); - iounmap(reg); - if (!base) { - printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n"); - return -ENODEV; - } - - /* setup PMCC: */ - offset = base + CYCLONE_PMCC_OFFSET; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n"); - return -ENODEV; - } - writel(0x00000001,reg); - iounmap(reg); - - /* setup MPCS: */ - offset = base + CYCLONE_MPCS_OFFSET; - reg = ioremap_nocache(offset, sizeof(reg)); - if (!reg) { - printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n"); - return -ENODEV; - } - writel(0x00000001,reg); - iounmap(reg); - - /* map in cyclone_timer: */ - offset = base + CYCLONE_MPMC_OFFSET; - cyclone_timer = ioremap_nocache(offset, sizeof(u64)); - if (!cyclone_timer) { - printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n"); - return -ENODEV; - } - - /* quick test to make sure its ticking: */ - for (i = 0; i < 3; i++){ - u32 old = readl(cyclone_timer); - int stall = 100; - - while (stall--) - barrier(); - - if (readl(cyclone_timer) == old) { - printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n"); - iounmap(cyclone_timer); - cyclone_timer = NULL; - return -ENODEV; - } - } - cyclone_ptr = cyclone_timer; - - return clocksource_register_hz(&clocksource_cyclone, - CYCLONE_TIMER_FREQ); -} - -arch_initcall(init_cyclone_clocksource); |
