summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource/timer-atmel-pit.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clocksource/timer-atmel-pit.c')
-rw-r--r--drivers/clocksource/timer-atmel-pit.c95
1 files changed, 37 insertions, 58 deletions
diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c
index 3494bc5a21d5..6555821bbdae 100644
--- a/drivers/clocksource/timer-atmel-pit.c
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -149,24 +149,13 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
{
struct pit_data *data = dev_id;
- /*
- * irqs should be disabled here, but as the irq is shared they are only
- * guaranteed to be off if the timer irq is registered first.
- */
- WARN_ON_ONCE(!irqs_disabled());
-
/* The PIT interrupt may be disabled, and is shared */
if (clockevent_state_periodic(&data->clkevt) &&
(pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) {
- unsigned nr_ticks;
-
/* Get number of ticks performed before irq, and ack it */
- nr_ticks = PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR));
- do {
- data->cnt += data->cycle;
- data->clkevt.event_handler(&data->clkevt);
- nr_ticks--;
- } while (nr_ticks);
+ data->cnt += data->cycle * PIT_PICNT(pit_read(data->base,
+ AT91_PIT_PIVR));
+ data->clkevt.event_handler(&data->clkevt);
return IRQ_HANDLED;
}
@@ -177,11 +166,41 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
/*
* Set up both clocksource and clockevent support.
*/
-static int __init at91sam926x_pit_common_init(struct pit_data *data)
+static int __init at91sam926x_pit_dt_init(struct device_node *node)
{
- unsigned long pit_rate;
- unsigned bits;
- int ret;
+ unsigned long pit_rate;
+ unsigned bits;
+ int ret;
+ struct pit_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->base = of_iomap(node, 0);
+ if (!data->base) {
+ pr_err("Could not map PIT address\n");
+ return -ENXIO;
+ }
+
+ data->mck = of_clk_get(node, 0);
+ if (IS_ERR(data->mck)) {
+ pr_err("Unable to get mck clk\n");
+ return PTR_ERR(data->mck);
+ }
+
+ ret = clk_prepare_enable(data->mck);
+ if (ret) {
+ pr_err("Unable to enable mck\n");
+ return ret;
+ }
+
+ /* Get the interrupts property */
+ data->irq = irq_of_parse_and_map(node, 0);
+ if (!data->irq) {
+ pr_err("Unable to get IRQ from DT\n");
+ return -EINVAL;
+ }
/*
* Use our actual MCK to figure out how many MCK/16 ticks per
@@ -236,45 +255,5 @@ static int __init at91sam926x_pit_common_init(struct pit_data *data)
return 0;
}
-
-static int __init at91sam926x_pit_dt_init(struct device_node *node)
-{
- struct pit_data *data;
-
- data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->base = of_iomap(node, 0);
- if (!data->base) {
- pr_err("Could not map PIT address\n");
- return -ENXIO;
- }
-
- data->mck = of_clk_get(node, 0);
- if (IS_ERR(data->mck))
- /* Fallback on clkdev for !CCF-based boards */
- data->mck = clk_get(NULL, "mck");
-
- if (IS_ERR(data->mck)) {
- pr_err("Unable to get mck clk\n");
- return PTR_ERR(data->mck);
- }
-
- ret = clk_prepare_enable(data->mck);
- if (ret) {
- pr_err("Unable to enable mck\n");
- return ret;
- }
-
- /* Get the interrupts property */
- data->irq = irq_of_parse_and_map(node, 0);
- if (!data->irq) {
- pr_err("Unable to get IRQ from DT\n");
- return -EINVAL;
- }
-
- return at91sam926x_pit_common_init(data);
-}
CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
at91sam926x_pit_dt_init);
OpenPOWER on IntegriCloud