diff options
Diffstat (limited to 'drivers/clk')
| -rw-r--r-- | drivers/clk/clkdev.c | 3 | ||||
| -rw-r--r-- | drivers/clk/mvebu/clk-cpu.c | 4 | ||||
| -rw-r--r-- | drivers/clk/rockchip/clk-mmc-phase.c | 54 | ||||
| -rw-r--r-- | drivers/clk/samsung/clk-cpu.c | 10 | ||||
| -rw-r--r-- | drivers/clk/ti/clk-3xxx.c | 2 | ||||
| -rw-r--r-- | drivers/clk/ti/clk-7xx.c | 18 | ||||
| -rw-r--r-- | drivers/clk/ti/clkt_dflt.c | 4 |
7 files changed, 49 insertions, 46 deletions
diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index c0eaf0973bd2..779b6ff0c7ad 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -333,7 +333,8 @@ int clk_add_alias(const char *alias, const char *alias_dev_name, if (IS_ERR(r)) return PTR_ERR(r); - l = clkdev_create(r, alias, "%s", alias_dev_name); + l = clkdev_create(r, alias, alias_dev_name ? "%s" : NULL, + alias_dev_name); clk_put(r); return l ? 0 : -ENODEV; diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c index 5837eb8a212f..85da8b983256 100644 --- a/drivers/clk/mvebu/clk-cpu.c +++ b/drivers/clk/mvebu/clk-cpu.c @@ -197,6 +197,7 @@ static void __init of_cpu_clk_setup(struct device_node *node) for_each_node_by_type(dn, "cpu") { struct clk_init_data init; struct clk *clk; + struct clk *parent_clk; char *clk_name = kzalloc(5, GFP_KERNEL); int cpu, err; @@ -208,8 +209,9 @@ static void __init of_cpu_clk_setup(struct device_node *node) goto bail_out; sprintf(clk_name, "cpu%d", cpu); + parent_clk = of_clk_get(node, 0); - cpuclk[cpu].parent_name = of_clk_get_parent_name(node, 0); + cpuclk[cpu].parent_name = __clk_get_name(parent_clk); cpuclk[cpu].clk_name = clk_name; cpuclk[cpu].cpu = cpu; cpuclk[cpu].reg_base = clock_complex_base; diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c index 9b613426e968..bc24e5a002e7 100644 --- a/drivers/clk/rockchip/clk-mmc-phase.c +++ b/drivers/clk/rockchip/clk-mmc-phase.c @@ -45,8 +45,8 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw *hw, #define PSECS_PER_SEC 1000000000000LL /* - * Each fine delay is between 40ps-80ps. Assume each fine delay is 60ps to - * simplify calculations. So 45degs could be anywhere between 33deg and 66deg. + * Each fine delay is between 44ps-77ps. Assume each fine delay is 60ps to + * simplify calculations. So 45degs could be anywhere between 33deg and 57.8deg. */ #define ROCKCHIP_MMC_DELAY_ELEMENT_PSEC 60 @@ -69,7 +69,7 @@ static int rockchip_mmc_get_phase(struct clk_hw *hw) delay_num = (raw_value & ROCKCHIP_MMC_DELAYNUM_MASK); delay_num >>= ROCKCHIP_MMC_DELAYNUM_OFFSET; - degrees += delay_num * factor / 10000; + degrees += DIV_ROUND_CLOSEST(delay_num * factor, 10000); } return degrees % 360; @@ -82,25 +82,41 @@ static int rockchip_mmc_set_phase(struct clk_hw *hw, int degrees) u8 nineties, remainder; u8 delay_num; u32 raw_value; - u64 delay; - - /* allow 22 to be 22.5 */ - degrees++; - /* floor to 22.5 increment */ - degrees -= ((degrees) * 10 % 225) / 10; + u32 delay; nineties = degrees / 90; - /* 22.5 multiples */ - remainder = (degrees % 90) / 22; - - delay = PSECS_PER_SEC; - do_div(delay, rate); - /* / 360 / 22.5 */ - do_div(delay, 16); - do_div(delay, ROCKCHIP_MMC_DELAY_ELEMENT_PSEC); - + remainder = (degrees % 90); + + /* + * Due to the inexact nature of the "fine" delay, we might + * actually go non-monotonic. We don't go _too_ monotonic + * though, so we should be OK. Here are options of how we may + * work: + * + * Ideally we end up with: + * 1.0, 2.0, ..., 69.0, 70.0, ..., 89.0, 90.0 + * + * On one extreme (if delay is actually 44ps): + * .73, 1.5, ..., 50.6, 51.3, ..., 65.3, 90.0 + * The other (if delay is actually 77ps): + * 1.3, 2.6, ..., 88.6. 89.8, ..., 114.0, 90 + * + * It's possible we might make a delay that is up to 25 + * degrees off from what we think we're making. That's OK + * though because we should be REALLY far from any bad range. + */ + + /* + * Convert to delay; do a little extra work to make sure we + * don't overflow 32-bit / 64-bit numbers. + */ + delay = 10000000; /* PSECS_PER_SEC / 10000 / 10 */ delay *= remainder; - delay_num = (u8) min(delay, 255ULL); + delay = DIV_ROUND_CLOSEST(delay, + (rate / 1000) * 36 * + (ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10)); + + delay_num = (u8) min_t(u32, delay, 255); raw_value = delay_num ? ROCKCHIP_MMC_DELAY_SEL : 0; raw_value |= delay_num << ROCKCHIP_MMC_DELAYNUM_OFFSET; diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c index 7c1e1f58e2da..2fe37f708dc7 100644 --- a/drivers/clk/samsung/clk-cpu.c +++ b/drivers/clk/samsung/clk-cpu.c @@ -164,7 +164,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, * the values for DIV_COPY and DIV_HPM dividers need not be set. */ div0 = cfg_data->div0; - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { div1 = cfg_data->div1; if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK) div1 = readl(base + E4210_DIV_CPU1) & @@ -185,7 +185,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1; WARN_ON(alt_div >= MAX_DIV); - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { /* * In Exynos4210, ATB clock parent is also mout_core. So * ATB clock also needs to be mantained at safe speed. @@ -206,7 +206,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, writel(div0, base + E4210_DIV_CPU0); wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL); - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { writel(div1, base + E4210_DIV_CPU1); wait_until_divider_stable(base + E4210_DIV_STAT_CPU1, DIV_MASK_ALL); @@ -225,7 +225,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, unsigned long mux_reg; /* find out the divider values to use for clock data */ - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { while ((cfg_data->prate * 1000) != ndata->new_rate) { if (cfg_data->prate == 0) return -EINVAL; @@ -240,7 +240,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU); wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1); - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK); div_mask |= E4210_DIV0_ATB_MASK; } diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c index 676ee8f6d813..8831e1a05367 100644 --- a/drivers/clk/ti/clk-3xxx.c +++ b/drivers/clk/ti/clk-3xxx.c @@ -374,7 +374,6 @@ static struct ti_dt_clk omap3xxx_clks[] = { DT_CLK(NULL, "gpio2_ick", "gpio2_ick"), DT_CLK(NULL, "wdt3_ick", "wdt3_ick"), DT_CLK(NULL, "uart3_ick", "uart3_ick"), - DT_CLK(NULL, "uart4_ick", "uart4_ick"), DT_CLK(NULL, "gpt9_ick", "gpt9_ick"), DT_CLK(NULL, "gpt8_ick", "gpt8_ick"), DT_CLK(NULL, "gpt7_ick", "gpt7_ick"), @@ -519,6 +518,7 @@ static struct ti_dt_clk am35xx_clks[] = { static struct ti_dt_clk omap36xx_clks[] = { DT_CLK(NULL, "omap_192m_alwon_fck", "omap_192m_alwon_fck"), DT_CLK(NULL, "uart4_fck", "uart4_fck"), + DT_CLK(NULL, "uart4_ick", "uart4_ick"), { .node_name = NULL }, }; diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index 9b5b289e6334..a911d7de3377 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -18,7 +18,6 @@ #include "clock.h" -#define DRA7_DPLL_ABE_DEFFREQ 180633600 #define DRA7_DPLL_GMAC_DEFFREQ 1000000000 #define DRA7_DPLL_USB_DEFFREQ 960000000 @@ -313,27 +312,12 @@ static struct ti_dt_clk dra7xx_clks[] = { int __init dra7xx_dt_clk_init(void) { int rc; - struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck, *hdcp_ck; + struct clk *dpll_ck, *hdcp_ck; ti_dt_clocks_register(dra7xx_clks); omap2_clk_disable_autoidle_all(); - abe_dpll_mux = clk_get_sys(NULL, "abe_dpll_sys_clk_mux"); - sys_clkin2 = clk_get_sys(NULL, "sys_clkin2"); - dpll_ck = clk_get_sys(NULL, "dpll_abe_ck"); - - rc = clk_set_parent(abe_dpll_mux, sys_clkin2); - if (!rc) - rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ); - if (rc) - pr_err("%s: failed to configure ABE DPLL!\n", __func__); - - dpll_ck = clk_get_sys(NULL, "dpll_abe_m2x2_ck"); - rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ * 2); - if (rc) - pr_err("%s: failed to configure ABE DPLL m2x2!\n", __func__); - dpll_ck = clk_get_sys(NULL, "dpll_gmac_ck"); rc = clk_set_rate(dpll_ck, DRA7_DPLL_GMAC_DEFFREQ); if (rc) diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c index 90d7d8a21c49..1ddc288fce4e 100644 --- a/drivers/clk/ti/clkt_dflt.c +++ b/drivers/clk/ti/clkt_dflt.c @@ -222,7 +222,7 @@ int omap2_dflt_clk_enable(struct clk_hw *hw) } } - if (unlikely(!clk->enable_reg)) { + if (unlikely(IS_ERR(clk->enable_reg))) { pr_err("%s: %s missing enable_reg\n", __func__, clk_hw_get_name(hw)); ret = -EINVAL; @@ -264,7 +264,7 @@ void omap2_dflt_clk_disable(struct clk_hw *hw) u32 v; clk = to_clk_hw_omap(hw); - if (!clk->enable_reg) { + if (IS_ERR(clk->enable_reg)) { /* * 'independent' here refers to a clock which is not * controlled by its parent. |
