diff options
Diffstat (limited to 'drivers/bluetooth')
| -rw-r--r-- | drivers/bluetooth/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/bluetooth/bpa10x.c | 3 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_bcsp.c | 160 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_bcsp.h | 70 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_h4.c | 101 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_h4.h | 44 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_ldisc.c | 134 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_uart.h | 84 |
8 files changed, 278 insertions, 326 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 543f93e0f23f..b9fbe6e7f9ae 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -55,14 +55,6 @@ config BT_HCIUART_BCSP Say Y here to compile support for HCI BCSP protocol. -config BT_HCIUART_BCSP_TXCRC - bool "Transmit CRC with every BCSP packet" - depends on BT_HCIUART_BCSP - help - If you say Y here, a 16-bit CRC checksum will be transmitted along with - every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip. - This increases reliability, but slightly reduces efficiency. - config BT_HCIBCM203X tristate "HCI BCM203x USB driver" depends on USB diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 4fa85234d8b5..0db0400519c9 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -550,6 +550,9 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id * if (ignore) return -ENODEV; + if (intf->cur_altsetting->desc.bInterfaceNumber > 0) + return -ENODEV; + data = kmalloc(sizeof(*data), GFP_KERNEL); if (!data) { BT_ERR("Can't allocate data structure"); diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 0ee324e1265d..0a4761415ac3 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -1,35 +1,27 @@ -/* - BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ). - Copyright 2002 by Fabrizio Gennari <fabrizio.gennari@philips.com> - - Based on - hci_h4.c by Maxim Krasnyansky <maxk@qualcomm.com> - ABCSP by Carl Orsborn <cjo@csr.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $ + * + * Bluetooth HCI UART driver + * + * Copyright (C) 2002-2003 Fabrizio Gennari <fabrizio.gennari@philips.com> + * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "0.2" - #include <linux/config.h> #include <linux/module.h> @@ -52,16 +44,56 @@ #include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> + #include "hci_uart.h" -#include "hci_bcsp.h" #ifndef CONFIG_BT_HCIUART_DEBUG #undef BT_DBG #define BT_DBG( A... ) #endif +#define VERSION "0.3" + +static int txcrc = 1; static int hciextn = 1; +#define BCSP_TXWINSIZE 4 + +#define BCSP_ACK_PKT 0x05 +#define BCSP_LE_PKT 0x06 + +struct bcsp_struct { + struct sk_buff_head unack; /* Unack'ed packets queue */ + struct sk_buff_head rel; /* Reliable packets queue */ + struct sk_buff_head unrel; /* Unreliable packets queue */ + + unsigned long rx_count; + struct sk_buff *rx_skb; + u8 rxseq_txack; /* rxseq == txack. */ + u8 rxack; /* Last packet sent by us that the peer ack'ed */ + struct timer_list tbcsp; + + enum { + BCSP_W4_PKT_DELIMITER, + BCSP_W4_PKT_START, + BCSP_W4_BCSP_HDR, + BCSP_W4_DATA, + BCSP_W4_CRC + } rx_state; + + enum { + BCSP_ESCSTATE_NOESC, + BCSP_ESCSTATE_ESC + } rx_esc_state; + + u8 use_crc; + u16 message_crc; + u8 txack_req; /* Do we need to send ack's to the peer? */ + + /* Reliable packet sequence number - used to assign seq to each rel pkt. */ + u8 msgq_txseq; +}; + /* ---- BCSP CRC calculation ---- */ /* Table for calculating CRC for polynomial 0x1021, LSB processed first, @@ -111,6 +143,7 @@ static u16 bcsp_crc_reverse(u16 crc) rev |= (crc & 1); crc = crc >> 1; } + return (rev); } @@ -119,6 +152,7 @@ static u16 bcsp_crc_reverse(u16 crc) static void bcsp_slip_msgdelim(struct sk_buff *skb) { const char pkt_delim = 0xc0; + memcpy(skb_put(skb, 1), &pkt_delim, 1); } @@ -173,11 +207,8 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, { struct sk_buff *nskb; u8 hdr[4], chan; - int rel, i; - -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC u16 BCSP_CRC_INIT(bcsp_txmsg_crc); -#endif + int rel, i; switch (pkt_type) { case HCI_ACLDATA_PKT: @@ -240,9 +271,9 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq); bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07; } -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - hdr[0] |= 0x40; -#endif + + if (bcsp->use_crc) + hdr[0] |= 0x40; hdr[1] = ((len << 4) & 0xff) | chan; hdr[2] = len >> 4; @@ -251,25 +282,25 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, /* Put BCSP header */ for (i = 0; i < 4; i++) { bcsp_slip_one_byte(nskb, hdr[i]); -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]); -#endif + + if (bcsp->use_crc) + bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]); } /* Put payload */ for (i = 0; i < len; i++) { bcsp_slip_one_byte(nskb, data[i]); -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - bcsp_crc_update(&bcsp_txmsg_crc, data[i]); -#endif + + if (bcsp->use_crc) + bcsp_crc_update(&bcsp_txmsg_crc, data[i]); } -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC /* Put CRC */ - bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc); - bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff)); - bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff)); -#endif + if (bcsp->use_crc) { + bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc); + bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff)); + bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff)); + } bcsp_slip_msgdelim(nskb); return nskb; @@ -317,7 +348,6 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu) spin_unlock_irqrestore(&bcsp->unack.lock, flags); - /* We could not send a reliable packet, either because there are none or because there are too many unack'ed pkts. Did we receive any packets we have not acknowledged yet ? */ @@ -363,7 +393,7 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp) BT_ERR("Peer acked invalid packet"); BT_DBG("Removing %u pkts out of %u, up to seqno %u", - pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07); + pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07); for (i = 0, skb = ((struct sk_buff *) &bcsp->unack)->next; i < pkts_to_be_removed && skb != (struct sk_buff *) &bcsp->unack; i++) { @@ -374,8 +404,10 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp) kfree_skb(skb); skb = nskb; } + if (bcsp->unack.qlen == 0) del_timer(&bcsp->tbcsp); + spin_unlock_irqrestore(&bcsp->unack.lock, flags); if (i != pkts_to_be_removed) @@ -530,6 +562,7 @@ static inline void bcsp_complete_rx_pkt(struct hci_uart *hu) hci_recv_frame(bcsp->rx_skb); } + bcsp->rx_state = BCSP_W4_PKT_DELIMITER; bcsp->rx_skb = NULL; } @@ -598,8 +631,8 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count) BT_ERR ("Checksum failed: computed %04x received %04x", bcsp_crc_reverse(bcsp->message_crc), - (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) + - bcsp->rx_skb->data[bcsp->rx_skb->len - 1]); + (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) + + bcsp->rx_skb->data[bcsp->rx_skb->len - 1]); kfree_skb(bcsp->rx_skb); bcsp->rx_state = BCSP_W4_PKT_DELIMITER; @@ -633,7 +666,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count) bcsp->rx_count = 4; bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC; BCSP_CRC_INIT(bcsp->message_crc); - + /* Do not increment ptr or decrement count * Allocate packet. Max len of a BCSP pkt= * 0xFFF (payload) +4 (header) +2 (crc) */ @@ -698,6 +731,9 @@ static int bcsp_open(struct hci_uart *hu) bcsp->rx_state = BCSP_W4_PKT_DELIMITER; + if (txcrc) + bcsp->use_crc = 1; + return 0; } @@ -718,18 +754,19 @@ static int bcsp_close(struct hci_uart *hu) } static struct hci_uart_proto bcsp = { - .id = HCI_UART_BCSP, - .open = bcsp_open, - .close = bcsp_close, - .enqueue = bcsp_enqueue, - .dequeue = bcsp_dequeue, - .recv = bcsp_recv, - .flush = bcsp_flush + .id = HCI_UART_BCSP, + .open = bcsp_open, + .close = bcsp_close, + .enqueue = bcsp_enqueue, + .dequeue = bcsp_dequeue, + .recv = bcsp_recv, + .flush = bcsp_flush }; int bcsp_init(void) { int err = hci_uart_register_proto(&bcsp); + if (!err) BT_INFO("HCI BCSP protocol initialized"); else @@ -743,5 +780,8 @@ int bcsp_deinit(void) return hci_uart_unregister_proto(&bcsp); } +module_param(txcrc, bool, 0644); +MODULE_PARM_DESC(txcrc, "Transmit CRC with every BCSP packet"); + module_param(hciextn, bool, 0644); MODULE_PARM_DESC(hciextn, "Convert HCI Extensions into BCSP packets"); diff --git a/drivers/bluetooth/hci_bcsp.h b/drivers/bluetooth/hci_bcsp.h deleted file mode 100644 index a2b3bb92274b..000000000000 --- a/drivers/bluetooth/hci_bcsp.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ). - Copyright 2002 by Fabrizio Gennari <fabrizio.gennari@philips.com> - - Based on - hci_h4.c by Maxim Krasnyansky <maxk@qualcomm.com> - ABCSP by Carl Orsborn <cjo@csr.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - -/* - * $Id: hci_bcsp.h,v 1.2 2002/09/26 05:05:14 maxk Exp $ - */ - -#ifndef __HCI_BCSP_H__ -#define __HCI_BCSP_H__ - -#define BCSP_TXWINSIZE 4 - -#define BCSP_ACK_PKT 0x05 -#define BCSP_LE_PKT 0x06 - -struct bcsp_struct { - struct sk_buff_head unack; /* Unack'ed packets queue */ - struct sk_buff_head rel; /* Reliable packets queue */ - struct sk_buff_head unrel; /* Unreliable packets queue */ - - unsigned long rx_count; - struct sk_buff *rx_skb; - u8 rxseq_txack; /* rxseq == txack. */ - u8 rxack; /* Last packet sent by us that the peer ack'ed */ - struct timer_list tbcsp; - - enum { - BCSP_W4_PKT_DELIMITER, - BCSP_W4_PKT_START, - BCSP_W4_BCSP_HDR, - BCSP_W4_DATA, - BCSP_W4_CRC - } rx_state; - - enum { - BCSP_ESCSTATE_NOESC, - BCSP_ESCSTATE_ESC - } rx_esc_state; - - u16 message_crc; - u8 txack_req; /* Do we need to send ack's to the peer? */ - - /* Reliable packet sequence number - used to assign seq to each rel pkt. */ - u8 msgq_txseq; -}; - -#endif /* __HCI_BCSP_H__ */ diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c index cf8a22d58d96..12e369a66fc2 100644 --- a/drivers/bluetooth/hci_h4.c +++ b/drivers/bluetooth/hci_h4.c @@ -1,33 +1,27 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * Bluetooth HCI UART(H4) protocol. * - * $Id: hci_h4.c,v 1.3 2002/09/09 01:17:32 maxk Exp $ + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com> + * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "1.2" #include <linux/config.h> #include <linux/module.h> @@ -51,24 +45,41 @@ #include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> + #include "hci_uart.h" -#include "hci_h4.h" #ifndef CONFIG_BT_HCIUART_DEBUG #undef BT_DBG #define BT_DBG( A... ) #endif +#define VERSION "1.2" + +struct h4_struct { + unsigned long rx_state; + unsigned long rx_count; + struct sk_buff *rx_skb; + struct sk_buff_head txq; +}; + +/* H4 receiver States */ +#define H4_W4_PACKET_TYPE 0 +#define H4_W4_EVENT_HDR 1 +#define H4_W4_ACL_HDR 2 +#define H4_W4_SCO_HDR 3 +#define H4_W4_DATA 4 + /* Initialize protocol */ static int h4_open(struct hci_uart *hu) { struct h4_struct *h4; - + BT_DBG("hu %p", hu); - + h4 = kmalloc(sizeof(*h4), GFP_ATOMIC); if (!h4) return -ENOMEM; + memset(h4, 0, sizeof(*h4)); skb_queue_head_init(&h4->txq); @@ -83,7 +94,9 @@ static int h4_flush(struct hci_uart *hu) struct h4_struct *h4 = hu->priv; BT_DBG("hu %p", hu); + skb_queue_purge(&h4->txq); + return 0; } @@ -91,16 +104,19 @@ static int h4_flush(struct hci_uart *hu) static int h4_close(struct hci_uart *hu) { struct h4_struct *h4 = hu->priv; + hu->priv = NULL; BT_DBG("hu %p", hu); skb_queue_purge(&h4->txq); + if (h4->rx_skb) kfree_skb(h4->rx_skb); hu->priv = NULL; kfree(h4); + return 0; } @@ -114,6 +130,7 @@ static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb) /* Prepend skb with frame type */ memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); skb_queue_tail(&h4->txq, skb); + return 0; } @@ -122,6 +139,7 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len) register int room = skb_tailroom(h4->rx_skb); BT_DBG("len %d room %d", len, room); + if (!len) { hci_recv_frame(h4->rx_skb); } else if (len > room) { @@ -136,6 +154,7 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len) h4->rx_state = H4_W4_PACKET_TYPE; h4->rx_skb = NULL; h4->rx_count = 0; + return 0; } @@ -228,6 +247,7 @@ static int h4_recv(struct hci_uart *hu, void *data, int count) ptr++; count--; continue; }; + ptr++; count--; /* Allocate packet */ @@ -238,9 +258,11 @@ static int h4_recv(struct hci_uart *hu, void *data, int count) h4->rx_count = 0; return 0; } + h4->rx_skb->dev = (void *) hu->hdev; bt_cb(h4->rx_skb)->pkt_type = type; } + return count; } @@ -251,23 +273,24 @@ static struct sk_buff *h4_dequeue(struct hci_uart *hu) } static struct hci_uart_proto h4p = { - .id = HCI_UART_H4, - .open = h4_open, - .close = h4_close, - .recv = h4_recv, - .enqueue = h4_enqueue, - .dequeue = h4_dequeue, - .flush = h4_flush, + .id = HCI_UART_H4, + .open = h4_open, + .close = h4_close, + .recv = h4_recv, + .enqueue = h4_enqueue, + .dequeue = h4_dequeue, + .flush = h4_flush, }; - + int h4_init(void) { int err = hci_uart_register_proto(&h4p); + if (!err) BT_INFO("HCI H4 protocol initialized"); else BT_ERR("HCI H4 protocol registration failed"); - + return err; } diff --git a/drivers/bluetooth/hci_h4.h b/drivers/bluetooth/hci_h4.h deleted file mode 100644 index b95ff54bfd47..000000000000 --- a/drivers/bluetooth/hci_h4.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - -/* - * $Id: hci_h4.h,v 1.2 2002/09/09 01:17:32 maxk Exp $ - */ - -#ifdef __KERNEL__ -struct h4_struct { - unsigned long rx_state; - unsigned long rx_count; - struct sk_buff *rx_skb; - struct sk_buff_head txq; -}; - -/* H4 receiver States */ -#define H4_W4_PACKET_TYPE 0 -#define H4_W4_EVENT_HDR 1 -#define H4_W4_ACL_HDR 2 -#define H4_W4_SCO_HDR 3 -#define H4_W4_DATA 4 - -#endif /* __KERNEL__ */ diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index aed80cc22890..4a775f6ea390 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -1,33 +1,27 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * Bluetooth HCI UART driver. * - * $Id: hci_ldisc.c,v 1.5 2002/10/02 18:37:20 maxk Exp $ + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com> + * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "2.1" #include <linux/config.h> #include <linux/module.h> @@ -59,6 +53,8 @@ #define BT_DBG( A... ) #endif +#define VERSION "2.2" + static int reset = 0; static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO]; @@ -72,6 +68,7 @@ int hci_uart_register_proto(struct hci_uart_proto *p) return -EEXIST; hup[p->id] = p; + return 0; } @@ -84,6 +81,7 @@ int hci_uart_unregister_proto(struct hci_uart_proto *p) return -EINVAL; hup[p->id] = NULL; + return 0; } @@ -91,13 +89,14 @@ static struct hci_uart_proto *hci_uart_get_proto(unsigned int id) { if (id >= HCI_UART_MAX_PROTO) return NULL; + return hup[id]; } static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type) { struct hci_dev *hdev = hu->hdev; - + /* Update HCI stat counters */ switch (pkt_type) { case HCI_COMMAND_PKT: @@ -117,10 +116,12 @@ static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type) static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu) { struct sk_buff *skb = hu->tx_skb; + if (!skb) skb = hu->proto->dequeue(hu); else hu->tx_skb = NULL; + return skb; } @@ -129,7 +130,7 @@ int hci_uart_tx_wakeup(struct hci_uart *hu) struct tty_struct *tty = hu->tty; struct hci_dev *hdev = hu->hdev; struct sk_buff *skb; - + if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) { set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state); return 0; @@ -142,7 +143,7 @@ restart: while ((skb = hci_uart_dequeue(hu))) { int len; - + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); len = tty->driver->write(tty, skb->data, skb->len); hdev->stat.byte_tx += len; @@ -152,11 +153,11 @@ restart: hu->tx_skb = skb; break; } - + hci_uart_tx_complete(hu, bt_cb(skb)->pkt_type); kfree_skb(skb); - } - + } + if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state)) goto restart; @@ -173,6 +174,7 @@ static int hci_uart_open(struct hci_dev *hdev) /* Nothing to do for UART driver */ set_bit(HCI_RUNNING, &hdev->flags); + return 0; } @@ -234,6 +236,7 @@ static int hci_uart_send_frame(struct sk_buff *skb) hu->proto->enqueue(hu, skb); hci_uart_tx_wakeup(hu); + return 0; } @@ -241,7 +244,8 @@ static void hci_uart_destruct(struct hci_dev *hdev) { struct hci_uart *hu; - if (!hdev) return; + if (!hdev) + return; BT_DBG("%s", hdev->name); @@ -272,6 +276,7 @@ static int hci_uart_tty_open(struct tty_struct *tty) BT_ERR("Can't allocate controll structure"); return -ENFILE; } + memset(hu, 0, sizeof(struct hci_uart)); tty->disc_data = hu; @@ -280,8 +285,10 @@ static int hci_uart_tty_open(struct tty_struct *tty) spin_lock_init(&hu->rx_lock); /* Flush any pending characters in the driver and line discipline. */ + /* FIXME: why is this needed. Note don't use ldisc_ref here as the open path is before the ldisc is referencable */ + if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty); @@ -372,13 +379,13 @@ static int hci_uart_tty_room (struct tty_struct *tty) static void hci_uart_tty_receive(struct tty_struct *tty, const __u8 *data, char *flags, int count) { struct hci_uart *hu = (void *)tty->disc_data; - + if (!hu || tty != hu->tty) return; if (!test_bit(HCI_UART_PROTO_SET, &hu->flags)) return; - + spin_lock(&hu->rx_lock); hu->proto->recv(hu, (void *) data, count); hu->hdev->stat.byte_rx += count; @@ -429,8 +436,8 @@ static int hci_uart_register_dev(struct hci_uart *hu) static int hci_uart_set_proto(struct hci_uart *hu, int id) { struct hci_uart_proto *p; - int err; - + int err; + p = hci_uart_get_proto(id); if (!p) return -EPROTONOSUPPORT; @@ -446,6 +453,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id) p->close(hu); return err; } + return 0; } @@ -463,7 +471,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id) * Return Value: Command dependent */ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) + unsigned int cmd, unsigned long arg) { struct hci_uart *hu = (void *)tty->disc_data; int err = 0; @@ -483,14 +491,14 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, return err; } tty->low_latency = 1; - } else + } else return -EBUSY; case HCIUARTGETPROTO: if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) return hu->proto->id; return -EUNATCH; - + default: err = n_tty_ioctl(tty, file, cmd, arg); break; @@ -502,28 +510,24 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, /* * We don't provide read/write/poll interface for user space. */ -static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, unsigned char __user *buf, size_t nr) +static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, + unsigned char __user *buf, size_t nr) { return 0; } -static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count) + +static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, + const unsigned char *data, size_t count) { return 0; } -static unsigned int hci_uart_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait) + +static unsigned int hci_uart_tty_poll(struct tty_struct *tty, + struct file *filp, poll_table *wait) { return 0; } -#ifdef CONFIG_BT_HCIUART_H4 -int h4_init(void); -int h4_deinit(void); -#endif -#ifdef CONFIG_BT_HCIUART_BCSP -int bcsp_init(void); -int bcsp_deinit(void); -#endif - static int __init hci_uart_init(void) { static struct tty_ldisc hci_uart_ldisc; @@ -534,18 +538,18 @@ static int __init hci_uart_init(void) /* Register the tty discipline */ memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc)); - hci_uart_ldisc.magic = TTY_LDISC_MAGIC; - hci_uart_ldisc.name = "n_hci"; - hci_uart_ldisc.open = hci_uart_tty_open; - hci_uart_ldisc.close = hci_uart_tty_close; - hci_uart_ldisc.read = hci_uart_tty_read; - hci_uart_ldisc.write = hci_uart_tty_write; - hci_uart_ldisc.ioctl = hci_uart_tty_ioctl; - hci_uart_ldisc.poll = hci_uart_tty_poll; - hci_uart_ldisc.receive_room= hci_uart_tty_room; - hci_uart_ldisc.receive_buf = hci_uart_tty_receive; - hci_uart_ldisc.write_wakeup= hci_uart_tty_wakeup; - hci_uart_ldisc.owner = THIS_MODULE; + hci_uart_ldisc.magic = TTY_LDISC_MAGIC; + hci_uart_ldisc.name = "n_hci"; + hci_uart_ldisc.open = hci_uart_tty_open; + hci_uart_ldisc.close = hci_uart_tty_close; + hci_uart_ldisc.read = hci_uart_tty_read; + hci_uart_ldisc.write = hci_uart_tty_write; + hci_uart_ldisc.ioctl = hci_uart_tty_ioctl; + hci_uart_ldisc.poll = hci_uart_tty_poll; + hci_uart_ldisc.receive_room = hci_uart_tty_room; + hci_uart_ldisc.receive_buf = hci_uart_tty_receive; + hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup; + hci_uart_ldisc.owner = THIS_MODULE; if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) { BT_ERR("HCI line discipline registration failed. (%d)", err); diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h index 0a57d72790ec..b250e6789dee 100644 --- a/drivers/bluetooth/hci_uart.h +++ b/drivers/bluetooth/hci_uart.h @@ -1,32 +1,29 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * $Id: hci_uart.h,v 1.2 2002/09/09 01:17:32 maxk Exp $ + * + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com> + * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#ifndef N_HCI +#ifndef N_HCI #define N_HCI 15 #endif @@ -42,7 +39,6 @@ #define HCI_UART_3WIRE 2 #define HCI_UART_H4DS 3 -#ifdef __KERNEL__ struct hci_uart; struct hci_uart_proto { @@ -56,27 +52,35 @@ struct hci_uart_proto { }; struct hci_uart { - struct tty_struct *tty; - struct hci_dev *hdev; - unsigned long flags; + struct tty_struct *tty; + struct hci_dev *hdev; + unsigned long flags; - struct hci_uart_proto *proto; - void *priv; - - struct sk_buff *tx_skb; - unsigned long tx_state; - spinlock_t rx_lock; + struct hci_uart_proto *proto; + void *priv; + + struct sk_buff *tx_skb; + unsigned long tx_state; + spinlock_t rx_lock; }; /* HCI_UART flag bits */ -#define HCI_UART_PROTO_SET 0 +#define HCI_UART_PROTO_SET 0 /* TX states */ -#define HCI_UART_SENDING 1 -#define HCI_UART_TX_WAKEUP 2 +#define HCI_UART_SENDING 1 +#define HCI_UART_TX_WAKEUP 2 int hci_uart_register_proto(struct hci_uart_proto *p); int hci_uart_unregister_proto(struct hci_uart_proto *p); int hci_uart_tx_wakeup(struct hci_uart *hu); -#endif /* __KERNEL__ */ +#ifdef CONFIG_BT_HCIUART_H4 +int h4_init(void); +int h4_deinit(void); +#endif + +#ifdef CONFIG_BT_HCIUART_BCSP +int bcsp_init(void); +int bcsp_deinit(void); +#endif |
