diff options
Diffstat (limited to 'drivers/block/swim3.c')
-rw-r--r-- | drivers/block/swim3.c | 230 |
1 files changed, 130 insertions, 100 deletions
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index 3721e12135d9..cc42e762396f 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -250,8 +250,6 @@ static int floppy_open(struct inode *inode, struct file *filp); static int floppy_release(struct inode *inode, struct file *filp); static int floppy_check_change(struct gendisk *disk); static int floppy_revalidate(struct gendisk *disk); -static int swim3_add_device(struct device_node *swims); -int swim3_init(void); #ifndef CONFIG_PMAC_MEDIABAY #define check_media_bay(which, what) 1 @@ -1011,114 +1009,63 @@ static struct block_device_operations floppy_fops = { .revalidate_disk= floppy_revalidate, }; -int swim3_init(void) -{ - struct device_node *swim; - int err = -ENOMEM; - int i; - - swim = find_devices("floppy"); - while (swim && (floppy_count < MAX_FLOPPIES)) - { - swim3_add_device(swim); - swim = swim->next; - } - - swim = find_devices("swim3"); - while (swim && (floppy_count < MAX_FLOPPIES)) - { - swim3_add_device(swim); - swim = swim->next; - } - - if (!floppy_count) - return -ENODEV; - - for (i = 0; i < floppy_count; i++) { - disks[i] = alloc_disk(1); - if (!disks[i]) - goto out; - } - - if (register_blkdev(FLOPPY_MAJOR, "fd")) { - err = -EBUSY; - goto out; - } - - swim3_queue = blk_init_queue(do_fd_request, &swim3_lock); - if (!swim3_queue) { - err = -ENOMEM; - goto out_queue; - } - - for (i = 0; i < floppy_count; i++) { - struct gendisk *disk = disks[i]; - disk->major = FLOPPY_MAJOR; - disk->first_minor = i; - disk->fops = &floppy_fops; - disk->private_data = &floppy_states[i]; - disk->queue = swim3_queue; - disk->flags |= GENHD_FL_REMOVABLE; - sprintf(disk->disk_name, "fd%d", i); - set_capacity(disk, 2880); - add_disk(disk); - } - return 0; - -out_queue: - unregister_blkdev(FLOPPY_MAJOR, "fd"); -out: - while (i--) - put_disk(disks[i]); - /* shouldn't we do something with results of swim_add_device()? */ - return err; -} - -static int swim3_add_device(struct device_node *swim) +static int swim3_add_device(struct macio_dev *mdev, int index) { + struct device_node *swim = mdev->ofdev.node; struct device_node *mediabay; - struct floppy_state *fs = &floppy_states[floppy_count]; - struct resource res_reg, res_dma; + struct floppy_state *fs = &floppy_states[index]; + int rc = -EBUSY; - if (of_address_to_resource(swim, 0, &res_reg) || - of_address_to_resource(swim, 1, &res_dma)) { - printk(KERN_ERR "swim3: Can't get addresses\n"); - return -EINVAL; + /* Check & Request resources */ + if (macio_resource_count(mdev) < 2) { + printk(KERN_WARNING "ifd%d: no address for %s\n", + index, swim->full_name); + return -ENXIO; } - if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1, - " (reg)") == NULL) { - printk(KERN_ERR "swim3: Can't request register space\n"); - return -EINVAL; + if (macio_irq_count(mdev) < 2) { + printk(KERN_WARNING "fd%d: no intrs for device %s\n", + index, swim->full_name); } - if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1, - " (dma)") == NULL) { - release_mem_region(res_reg.start, - res_reg.end - res_reg.start + 1); - printk(KERN_ERR "swim3: Can't request DMA space\n"); - return -EINVAL; + if (macio_request_resource(mdev, 0, "swim3 (mmio)")) { + printk(KERN_ERR "fd%d: can't request mmio resource for %s\n", + index, swim->full_name); + return -EBUSY; } - - if (swim->n_intrs < 2) { - printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n", - swim->n_intrs); - release_mem_region(res_reg.start, - res_reg.end - res_reg.start + 1); - release_mem_region(res_dma.start, - res_dma.end - res_dma.start + 1); - return -EINVAL; + if (macio_request_resource(mdev, 1, "swim3 (dma)")) { + printk(KERN_ERR "fd%d: can't request dma resource for %s\n", + index, swim->full_name); + macio_release_resource(mdev, 0); + return -EBUSY; } + dev_set_drvdata(&mdev->ofdev.dev, fs); - mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ? swim->parent : NULL; + mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ? + swim->parent : NULL; if (mediabay == NULL) pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1); memset(fs, 0, sizeof(*fs)); spin_lock_init(&fs->lock); fs->state = idle; - fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200); - fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200); - fs->swim3_intr = swim->intrs[0].line; - fs->dma_intr = swim->intrs[1].line; + fs->swim3 = (struct swim3 __iomem *) + ioremap(macio_resource_start(mdev, 0), 0x200); + if (fs->swim3 == NULL) { + printk("fd%d: couldn't map registers for %s\n", + index, swim->full_name); + rc = -ENOMEM; + goto out_release; + } + fs->dma = (struct dbdma_regs __iomem *) + ioremap(macio_resource_start(mdev, 1), 0x200); + if (fs->dma == NULL) { + printk("fd%d: couldn't map DMA for %s\n", + index, swim->full_name); + iounmap(fs->swim3); + rc = -ENOMEM; + goto out_release; + } + fs->swim3_intr = macio_irq(mdev, 0); + fs->dma_intr = macio_irq(mdev, 1);; fs->cur_cyl = -1; fs->cur_sector = -1; fs->secpercyl = 36; @@ -1132,15 +1079,16 @@ static int swim3_add_device(struct device_node *swim) st_le16(&fs->dma_cmd[1].command, DBDMA_STOP); if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) { - printk(KERN_ERR "Couldn't get irq %d for SWIM3\n", fs->swim3_intr); + printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n", + index, fs->swim3_intr, swim->full_name); pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0); + goto out_unmap; return -EBUSY; } /* if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) { printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA", fs->dma_intr); - pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0); return -EBUSY; } */ @@ -1150,8 +1098,90 @@ static int swim3_add_device(struct device_node *swim) printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count, mediabay ? "in media bay" : ""); - floppy_count++; - + return 0; + + out_unmap: + iounmap(fs->dma); + iounmap(fs->swim3); + + out_release: + macio_release_resource(mdev, 0); + macio_release_resource(mdev, 1); + + return rc; +} + +static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match) +{ + int i, rc; + struct gendisk *disk; + + /* Add the drive */ + rc = swim3_add_device(mdev, floppy_count); + if (rc) + return rc; + + /* Now create the queue if not there yet */ + if (swim3_queue == NULL) { + /* If we failed, there isn't much we can do as the driver is still + * too dumb to remove the device, just bail out + */ + if (register_blkdev(FLOPPY_MAJOR, "fd")) + return 0; + swim3_queue = blk_init_queue(do_fd_request, &swim3_lock); + if (swim3_queue == NULL) { + unregister_blkdev(FLOPPY_MAJOR, "fd"); + return 0; + } + } + + /* Now register that disk. Same comment about failure handling */ + i = floppy_count++; + disk = disks[i] = alloc_disk(1); + if (disk == NULL) + return 0; + + disk->major = FLOPPY_MAJOR; + disk->first_minor = i; + disk->fops = &floppy_fops; + disk->private_data = &floppy_states[i]; + disk->queue = swim3_queue; + disk->flags |= GENHD_FL_REMOVABLE; + sprintf(disk->disk_name, "fd%d", i); + set_capacity(disk, 2880); + add_disk(disk); + + return 0; +} + +static struct of_device_id swim3_match[] = +{ + { + .name = "swim3", + }, + { + .compatible = "ohare-swim3" + }, + { + .compatible = "swim3" + }, +}; + +static struct macio_driver swim3_driver = +{ + .name = "swim3", + .match_table = swim3_match, + .probe = swim3_attach, +#if 0 + .suspend = swim3_suspend, + .resume = swim3_resume, +#endif +}; + + +int swim3_init(void) +{ + macio_register_driver(&swim3_driver); return 0; } |