diff options
Diffstat (limited to 'drivers/block/cciss_scsi.c')
| -rw-r--r-- | drivers/block/cciss_scsi.c | 82 |
1 files changed, 81 insertions, 1 deletions
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index ec27976a57da..3226aa11c6ef 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -42,6 +42,9 @@ #include "cciss_scsi.h" +#define CCISS_ABORT_MSG 0x00 +#define CCISS_RESET_MSG 0x01 + /* some prototypes... */ static int sendcmd( __u8 cmd, @@ -67,6 +70,8 @@ static int cciss_scsi_proc_info( static int cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)); +static int cciss_eh_device_reset_handler(struct scsi_cmnd *); +static int cciss_eh_abort_handler(struct scsi_cmnd *); static struct cciss_scsi_hba_t ccissscsi[MAX_CTLR] = { { .name = "cciss0", .ndevices = 0 }, @@ -90,6 +95,9 @@ static struct scsi_host_template cciss_driver_template = { .sg_tablesize = MAXSGENTRIES, .cmd_per_lun = 1, .use_clustering = DISABLE_CLUSTERING, + /* Can't have eh_bus_reset_handler or eh_host_reset_handler for cciss */ + .eh_device_reset_handler= cciss_eh_device_reset_handler, + .eh_abort_handler = cciss_eh_abort_handler, }; #pragma pack(1) @@ -247,7 +255,7 @@ scsi_cmd_stack_free(int ctlr) #define DEVICETYPE(n) (n<0 || n>MAX_SCSI_DEVICE_CODE) ? \ "Unknown" : scsi_device_types[n] -#if 0 +#if 1 static int xmargin=8; static int amargin=60; @@ -1448,6 +1456,78 @@ cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len) *pos += size; *len += size; } +/* Need at least one of these error handlers to keep ../scsi/hosts.c from + * complaining. Doing a host- or bus-reset can't do anything good here. + * Despite what it might say in scsi_error.c, there may well be commands + * on the controller, as the cciss driver registers twice, once as a block + * device for the logical drives, and once as a scsi device, for any tape + * drives. So we know there are no commands out on the tape drives, but we + * don't know there are no commands on the controller, and it is likely + * that there probably are, as the cciss block device is most commonly used + * as a boot device (embedded controller on HP/Compaq systems.) +*/ + +static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) +{ + int rc; + CommandList_struct *cmd_in_trouble; + ctlr_info_t **c; + int ctlr; + + /* find the controller to which the command to be aborted was sent */ + c = (ctlr_info_t **) &scsicmd->device->host->hostdata[0]; + if (c == NULL) /* paranoia */ + return FAILED; + ctlr = (*c)->ctlr; + printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr); + + /* find the command that's giving us trouble */ + cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble; + if (cmd_in_trouble == NULL) { /* paranoia */ + return FAILED; + } + /* send a reset to the SCSI LUN which the command was sent to */ + rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, + (unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0], + TYPE_MSG); + /* sendcmd turned off interrputs on the board, turn 'em back on. */ + (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); + if (rc == 0) + return SUCCESS; + printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr); + return FAILED; +} + +static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) +{ + int rc; + CommandList_struct *cmd_to_abort; + ctlr_info_t **c; + int ctlr; + + /* find the controller to which the command to be aborted was sent */ + c = (ctlr_info_t **) &scsicmd->device->host->hostdata[0]; + if (c == NULL) /* paranoia */ + return FAILED; + ctlr = (*c)->ctlr; + printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", ctlr); + + /* find the command to be aborted */ + cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble; + if (cmd_to_abort == NULL) /* paranoia */ + return FAILED; + rc = sendcmd(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag, + 0, 2, 0, 0, + (unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0], + TYPE_MSG); + /* sendcmd turned off interrputs on the board, turn 'em back on. */ + (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); + if (rc == 0) + return SUCCESS; + return FAILED; + +} + #else /* no CONFIG_CISS_SCSI_TAPE */ /* If no tape support, then these become defined out of existence */ |
