diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/ahci.c | 159 | ||||
| -rw-r--r-- | drivers/ata/ata_piix.c | 20 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 11 | ||||
| -rw-r--r-- | drivers/ata/libata-scsi.c | 2 | ||||
| -rw-r--r-- | drivers/ata/libata-sff.c | 20 | ||||
| -rw-r--r-- | drivers/ata/pata_ali.c | 17 | ||||
| -rw-r--r-- | drivers/ata/pata_efar.c | 17 | ||||
| -rw-r--r-- | drivers/ata/pata_legacy.c | 2 | ||||
| -rw-r--r-- | drivers/ata/pata_netcell.c | 13 | ||||
| -rw-r--r-- | drivers/ata/sata_nv.c | 131 | ||||
| -rw-r--r-- | drivers/ata/sata_sil.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_sx4.c | 11 |
12 files changed, 295 insertions, 110 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 08186ecbaf8d..15a23031833f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -77,8 +77,6 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, size_t size); static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, ssize_t size); -#define MAX_SLOTS 8 -#define MAX_RETRY 15 enum { AHCI_PCI_BAR = 5, @@ -220,6 +218,7 @@ enum { AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ + AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ /* ap->flags bits */ @@ -230,6 +229,10 @@ enum { ICH_MAP = 0x90, /* ICH MAP register */ + /* em constants */ + EM_MAX_SLOTS = 8, + EM_MAX_RETRY = 5, + /* em_ctl bits */ EM_CTL_RST = (1 << 9), /* Reset */ EM_CTL_TM = (1 << 8), /* Transmit Message */ @@ -281,8 +284,8 @@ struct ahci_port_priv { unsigned int ncq_saw_dmas:1; unsigned int ncq_saw_sdb:1; u32 intr_mask; /* interrupts to enable */ - struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info - * per PM slot */ + /* enclosure management info per PM slot */ + struct ahci_em_priv em_priv[EM_MAX_SLOTS]; }; static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); @@ -312,7 +315,6 @@ static void ahci_error_handler(struct ata_port *ap); static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); static int ahci_port_resume(struct ata_port *ap); static void ahci_dev_config(struct ata_device *dev); -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl); static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts); #ifdef CONFIG_PM @@ -403,14 +405,14 @@ static struct ata_port_operations ahci_sb600_ops = { #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) static const struct ata_port_info ahci_port_info[] = { - /* board_ahci */ + [board_ahci] = { .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_vt8251 */ + [board_ahci_vt8251] = { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, @@ -418,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_vt8251_ops, }, - /* board_ahci_ign_iferr */ + [board_ahci_ign_iferr] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), .flags = AHCI_FLAG_COMMON, @@ -426,17 +428,16 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_sb600 */ + [board_ahci_sb600] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_SECT255), + AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, - /* board_ahci_mv */ + [board_ahci_mv] = { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), @@ -446,7 +447,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_sb700, for SB700 and SB800 */ + [board_ahci_sb700] = /* for SB700 and SB800 */ { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, @@ -454,7 +455,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, - /* board_ahci_mcp65 */ + [board_ahci_mcp65] = { AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), .flags = AHCI_FLAG_COMMON, @@ -462,7 +463,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_nopmp */ + [board_ahci_nopmp] = { AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, @@ -1140,12 +1141,12 @@ static void ahci_start_port(struct ata_port *ap) emp = &pp->em_priv[link->pmp]; /* EM Transmit bit maybe busy during init */ - for (i = 0; i < MAX_RETRY; i++) { + for (i = 0; i < EM_MAX_RETRY; i++) { rc = ahci_transmit_led_message(ap, emp->led_state, 4); if (rc == -EBUSY) - udelay(100); + msleep(1); else break; } @@ -1339,7 +1340,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, /* get the slot number from the message */ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < MAX_SLOTS) + if (pmp < EM_MAX_SLOTS) emp = &pp->em_priv[pmp]; else return -EINVAL; @@ -1407,7 +1408,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, /* get the slot number from the message */ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < MAX_SLOTS) + if (pmp < EM_MAX_SLOTS) emp = &pp->em_priv[pmp]; else return -EINVAL; @@ -2316,9 +2317,17 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; u32 ctl; + if (mesg.event & PM_EVENT_SUSPEND && + hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_printk(KERN_ERR, &pdev->dev, + "BIOS update required for suspend/resume\n"); + return -EIO; + } + if (mesg.event & PM_EVENT_SLEEP) { /* AHCI spec rev1.1 section 8.3.3: * Software must disable interrupts prior to requesting a @@ -2575,6 +2584,51 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } +/* + * SB600 ahci controller on ASUS M2A-VM can't do 64bit DMA with older + * BIOS. The oldest version known to be broken is 0901 and working is + * 1501 which was released on 2007-10-26. Force 32bit DMA on anything + * older than 1501. Please read bko#9412 for more info. + */ +static bool ahci_asus_m2a_vm_32bit_only(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + { + .ident = "ASUS M2A-VM", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"), + }, + }, + { } + }; + const char *cutoff_mmdd = "10/26"; + const char *date; + int year; + + if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) || + !dmi_check_system(sysids)) + return false; + + /* + * Argh.... both version and date are free form strings. + * Let's hope they're using the same date format across + * different versions. + */ + date = dmi_get_system_info(DMI_BIOS_DATE); + year = dmi_get_year(DMI_BIOS_DATE); + if (date && strlen(date) >= 10 && date[2] == '/' && date[5] == '/' && + (year > 2007 || + (year == 2007 && strncmp(date, cutoff_mmdd, 5) >= 0))) + return false; + + dev_printk(KERN_WARNING, &pdev->dev, "ASUS M2A-VM: BIOS too old, " + "forcing 32bit DMA, update BIOS\n"); + + return true; +} + static bool ahci_broken_system_poweroff(struct pci_dev *pdev) { static const struct dmi_system_id broken_systems[] = { @@ -2610,6 +2664,63 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev) return false; } +static bool ahci_broken_suspend(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + /* + * On HP dv[4-6] and HDX18 with earlier BIOSen, link + * to the harddisk doesn't become online after + * resuming from STR. Warn and fail suspend. + */ + { + .ident = "dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv4 Notebook PC"), + }, + .driver_data = "F.30", /* cutoff BIOS version */ + }, + { + .ident = "dv5", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv5 Notebook PC"), + }, + .driver_data = "F.16", /* cutoff BIOS version */ + }, + { + .ident = "dv6", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv6 Notebook PC"), + }, + .driver_data = "F.21", /* cutoff BIOS version */ + }, + { + .ident = "HDX18", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP HDX18 Notebook PC"), + }, + .driver_data = "F.23", /* cutoff BIOS version */ + }, + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(sysids); + const char *ver; + + if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2)) + return false; + + ver = dmi_get_system_info(DMI_BIOS_VERSION); + + return !ver || strcmp(ver, dmi->driver_data) < 0; +} + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2678,6 +2789,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; + /* apply ASUS M2A_VM quirk */ + if (ahci_asus_m2a_vm_32bit_only(pdev)) + hpriv->flags |= AHCI_HFLAG_32BIT_ONLY; + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) pci_enable_msi(pdev); @@ -2715,6 +2830,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "quirky BIOS, skipping spindown on poweroff\n"); } + if (ahci_broken_suspend(pdev)) { + hpriv->flags |= AHCI_HFLAG_NO_SUSPEND; + dev_printk(KERN_WARNING, &pdev->dev, + "BIOS update required for suspend/resume\n"); + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d51a17c0f59b..d0a14cf2bd74 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -223,10 +223,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* ICH8 Mobile PATA Controller */ { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, - /* NOTE: The following PCI ids must be kept in sync with the - * list in drivers/pci/quirks.c. - */ - + /* SATA ports */ + /* 82801EB (ICH5) */ { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, /* 82801EB (ICH5) */ @@ -1455,6 +1453,15 @@ static bool piix_broken_system_poweroff(struct pci_dev *pdev) /* PCI slot number of the controller */ .driver_data = (void *)0x1FUL, }, + { + .ident = "HP Compaq nc6000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, { } /* terminate list */ }; @@ -1500,8 +1507,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev, dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* no hotplugging support (FIXME) */ - if (!in_module_init) + /* no hotplugging support for later devices (FIXME) */ + if (!in_module_init && ent->driver_data >= ich5_sata) return -ENODEV; if (piix_broken_system_poweroff(pdev)) { @@ -1582,6 +1589,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, host->ports[1]->mwdma_mask = 0; host->ports[1]->udma_mask = 0; } + host->flags |= ATA_HOST_PARALLEL_SCAN; pci_set_master(pdev); return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c9242301cfa1..ca4d208ddf3b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5031,7 +5031,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) { int nr_done = 0; u32 done_mask; - int i; done_mask = ap->qc_active ^ qc_active; @@ -5041,16 +5040,16 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) return -EINVAL; } - for (i = 0; i < ATA_MAX_QUEUE; i++) { + while (done_mask) { struct ata_queued_cmd *qc; + unsigned int tag = __ffs(done_mask); - if (!(done_mask & (1 << i))) - continue; - - if ((qc = ata_qc_from_tag(ap, i))) { + qc = ata_qc_from_tag(ap, tag); + if (qc) { ata_qc_complete(qc); nr_done++; } + done_mask &= ~(1 << tag); } return nr_done; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 342316064e9f..d0dfeef55db5 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1084,7 +1084,7 @@ static int atapi_drain_needed(struct request *rq) if (likely(!blk_pc_request(rq))) return 0; - if (!rq->data_len || (rq->cmd_flags & REQ_RW)) + if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW)) return 0; return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index bb18415d3d63..bbbb1fab1755 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -727,17 +727,23 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, else iowrite16_rep(data_addr, buf, words); - /* Transfer trailing 1 byte, if any. */ + /* Transfer trailing byte, if any. */ if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; + unsigned char pad[2]; + /* Point buf to the tail of buffer */ + buf += buflen - 1; + + /* + * Use io*16_rep() accessors here as well to avoid pointlessly + * swapping bytes to and fro on the big endian machines... + */ if (rw == READ) { - align_buf[0] = cpu_to_le16(ioread16(data_addr)); - memcpy(trailing_buf, align_buf, 1); + ioread16_rep(data_addr, pad, 1); + *buf = pad[0]; } else { - memcpy(align_buf, trailing_buf, 1); - iowrite16(le16_to_cpu(align_buf[0]), data_addr); + pad[0] = *buf; + iowrite16_rep(data_addr, pad, 1); } words++; } diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 751b7ea4816c..fc9c5d6d7d80 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -497,14 +497,16 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0x20 added DMA */ static const struct ata_port_info info_20 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0x20 with support logic added UDMA */ static const struct ata_port_info info_20_udma = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, @@ -512,7 +514,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC2 adds UDMA66 */ static const struct ata_port_info info_c2 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, @@ -520,7 +523,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC3 is UDMA66 for now */ static const struct ata_port_info info_c3 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, @@ -528,7 +532,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC4 is UDMA100 */ static const struct ata_port_info info_c4 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -536,7 +541,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ static const struct ata_port_info info_c5 = { - .flags = ATA_FLAG_SLAVE_POSS, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 2085e0a3a05a..2a6412f5d117 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -22,7 +22,7 @@ #include <linux/ata.h> #define DRV_NAME "pata_efar" -#define DRV_VERSION "0.4.4" +#define DRV_VERSION "0.4.5" /** * efar_pre_reset - Enable bits @@ -98,18 +98,17 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; - if (pio > 2) - control |= 1; /* TIME1 enable */ + if (pio > 1) + control |= 1; /* TIME */ if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ - control |= 2; /* IE enable */ - /* Intel specifies that the PPE functionality is for disk only */ + control |= 2; /* IE */ + /* Intel specifies that the prefetch/posting is for disk only */ if (adev->class == ATA_DEV_ATA) - control |= 4; /* PPE enable */ + control |= 4; /* PPE */ pci_read_config_word(dev, idetm_port, &idetm_data); - /* Enable PPE, IE and TIME as appropriate */ - + /* Set PPE, IE, and TIME as appropriate */ if (adev->devno == 0) { idetm_data &= 0xCCF0; idetm_data |= control; @@ -129,7 +128,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(dev, 0x44, slave_data); } - idetm_data |= 0x4000; /* Ensure SITRE is enabled */ + idetm_data |= 0x4000; /* Ensure SITRE is set */ pci_write_config_word(dev, idetm_port, idetm_data); } diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index f72c6c5b820f..6932e56d179c 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -48,6 +48,7 @@ * */ +#include <linux/async.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> @@ -1028,6 +1029,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) &legacy_sht); if (ret) goto fail; + async_synchronize_full(); ld->platform_dev = pdev; /* Nothing found means we drop the port as its probably not there */ diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index bdb236957cb9..f0d52f72f5bb 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -20,13 +20,24 @@ /* No PIO or DMA methods needed for this device */ +static unsigned int netcell_read_id(struct ata_device *adev, + struct ata_taskfile *tf, u16 *id) +{ + unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); + /* Firmware forgets to mark words 85-87 valid */ + if (err_mask == 0) + id[ATA_ID_CSF_DEFAULT] |= 0x4000; + return err_mask; +} + static struct scsi_host_template netcell_sht = { ATA_BMDMA_SHT(DRV_NAME), }; static struct ata_port_operations netcell_ops = { .inherits = &ata_bmdma_port_ops, - .cable_detect = ata_cable_80wire, + .cable_detect = ata_cable_80wire, + .read_id = netcell_read_id, }; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6cda12ba8122..b2d11f300c39 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -305,8 +305,8 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); -static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); static void nv_ck804_freeze(struct ata_port *ap); @@ -406,49 +406,82 @@ static struct scsi_host_template nv_swncq_sht = { .slave_configure = nv_swncq_slave_config, }; -static struct ata_port_operations nv_common_ops = { +/* + * NV SATA controllers have various different problems with hardreset + * protocol depending on the specific controller and device. + * + * GENERIC: + * + * bko11195 reports that link doesn't come online after hardreset on + * generic nv's and there have been several other similar reports on + * linux-ide. + * + * bko12351#c23 reports that warmplug on MCP61 doesn't work with + * softreset. + * + * NF2/3: + * + * bko3352 reports nf2/3 controllers can't determine device signature + * reliably after hardreset. The following thread reports detection + * failure on cold boot with the standard debouncing timing. + * + * http://thread.gmane.org/gmane.linux.ide/34098 + * + * bko12176 reports that hardreset fails to bring up the link during + * boot on nf2. + * + * CK804: + * + * For initial probing after boot and hot plugging, hardreset mostly + * works fine on CK804 but curiously, reprobing on the initial port + * by rescanning or rmmod/insmod fails to acquire the initial D2H Reg + * FIS in somewhat undeterministic way. + * + * SWNCQ: + * + * bko12351 reports that when SWNCQ is enabled, for hotplug to work, + * hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. + * + * bko12703 reports that boot probing fails for intel SSD with + * hardreset. Link fails to come online. Softreset works fine. + * + * The failures are varied but the following patterns seem true for + * all flavors. + * + * - Softreset during boot always works. + * + * - Hardreset during boot sometimes fails to bring up the link on + * certain comibnations and device signature acquisition is + * unreliable. + * + * - Hardreset is often necessary after hotplug. + * + * So, preferring softreset for boot probing and error handling (as + * hardreset might bring down the link) but using hardreset for + * post-boot probing should work around the above issues in most + * cases. Define nv_hardreset() which only kicks in for post-boot + * probing and use it for all variants. + */ +static struct ata_port_operations nv_generic_ops = { .inherits = &ata_bmdma_port_ops, .lost_interrupt = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, + .hardreset = nv_hardreset, }; -/* OSDL bz11195 reports that link doesn't come online after hardreset - * on generic nv's and there have been several other similar reports - * on linux-ide. Disable hardreset for generic nv's. - */ -static struct ata_port_operations nv_generic_ops = { - .inherits = &nv_common_ops, - .hardreset = ATA_OP_NULL, -}; - -/* nf2 is ripe with hardreset related problems. - * - * kernel bz#3352 reports nf2/3 controllers can't determine device - * signature reliably. The following thread reports detection failure - * on cold boot with the standard debouncing timing. - * - * http://thread.gmane.org/gmane.linux.ide/34098 - * - * And bz#12176 reports that hardreset simply doesn't work on nf2. - * Give up on it and just don't do hardreset. - */ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_generic_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, }; -/* For initial probing after boot and hot plugging, hardreset mostly - * works fine on CK804 but curiously, reprobing on the initial port by - * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS - * in somewhat undeterministic way. Use noclassify hardreset. - */ static struct ata_port_operations nv_ck804_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, - .hardreset = nv_noclassify_hardreset, .host_stop = nv_ck804_host_stop, }; @@ -476,19 +509,8 @@ static struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; -/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to - * work, hardreset should be used and hardreset can't report proper - * signature, which suggests that mcp5x is closer to nf2 as long as - * reset quirkiness is concerned. Define separate ops for mcp5x with - * nv_noclassify_hardreset(). - */ -static struct ata_port_operations nv_mcp5x_ops = { - .inherits = &nv_common_ops, - .hardreset = nv_noclassify_hardreset, -}; - static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_mcp5x_ops, + .inherits = &nv_generic_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -557,7 +579,7 @@ static const struct ata_port_info nv_port_info[] = { .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_mcp5x_ops, + .port_ops = &nv_generic_ops, .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), }, /* SWNCQ */ @@ -1559,15 +1581,24 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } -static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { - bool online; - int rc; + struct ata_eh_context *ehc = &link->eh_context; - rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, - &online, NULL); - return online ? -EAGAIN : rc; + /* Do hardreset iff it's post-boot probing, please read the + * comment above port ops for details. + */ + if (!(link->ap->pflags & ATA_PFLAG_LOADING) && + !ata_dev_enabled(link->device)) + sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + NULL, NULL); + else if (!(ehc->i.flags & ATA_EHI_QUIET)) + ata_link_printk(link, KERN_INFO, + "nv: skipping hardreset on occupied port\n"); + + /* device signature acquisition is unreliable */ + return -EAGAIN; } static void nv_nf2_freeze(struct ata_port *ap) diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index e67ce8e5caa5..030ec079b184 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -183,7 +183,7 @@ static struct scsi_host_template sil_sht = { }; static struct ata_port_operations sil_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &ata_bmdma32_port_ops, .dev_config = sil_dev_config, .set_mode = sil_set_mode, .bmdma_setup = sil_bmdma_setup, diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index eb05a3c82a9e..bbcf970068ad 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -193,6 +193,7 @@ enum { PDC_TIMER_MASK_INT, }; +#define ECC_ERASE_BUF_SZ (128 * 1024) struct pdc_port_priv { u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512]; @@ -1280,7 +1281,6 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) { int speed, size, length; u32 addr, spd0, pci_status; - u32 tmp = 0; u32 time_period = 0; u32 tcount = 0; u32 ticks = 0; @@ -1395,14 +1395,17 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE, &spd0); if (spd0 == 0x02) { + void *buf; VPRINTK("Start ECC initialization\n"); addr = 0; length = size * 1024 * 1024; + buf = kzalloc(ECC_ERASE_BUF_SZ, GFP_KERNEL); while (addr < length) { - pdc20621_put_to_dimm(host, (void *) &tmp, addr, - sizeof(u32)); - addr += sizeof(u32); + pdc20621_put_to_dimm(host, buf, addr, + ECC_ERASE_BUF_SZ); + addr += ECC_ERASE_BUF_SZ; } + kfree(buf); VPRINTK("Finish ECC initialization\n"); } return 0; |
