summaryrefslogtreecommitdiffstats
path: root/drivers/ata/sata_sil.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/sata_sil.c')
-rw-r--r--drivers/ata/sata_sil.c98
1 files changed, 95 insertions, 3 deletions
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 031d7b7dee34..564c142b03b0 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -46,7 +46,9 @@
#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "2.3"
+#define DRV_VERSION "2.4"
+
+#define SIL_DMA_BOUNDARY 0x7fffffffUL
enum {
SIL_MMIO_BAR = 5,
@@ -118,6 +120,10 @@ static void sil_dev_config(struct ata_device *dev);
static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed);
+static void sil_qc_prep(struct ata_queued_cmd *qc);
+static void sil_bmdma_setup(struct ata_queued_cmd *qc);
+static void sil_bmdma_start(struct ata_queued_cmd *qc);
+static void sil_bmdma_stop(struct ata_queued_cmd *qc);
static void sil_freeze(struct ata_port *ap);
static void sil_thaw(struct ata_port *ap);
@@ -167,13 +173,22 @@ static struct pci_driver sil_pci_driver = {
};
static struct scsi_host_template sil_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
+ ATA_BASE_SHT(DRV_NAME),
+ /** These controllers support Large Block Transfer which allows
+ transfer chunks up to 2GB and which cross 64KB boundaries,
+ therefore the DMA limits are more relaxed than standard ATA SFF. */
+ .dma_boundary = SIL_DMA_BOUNDARY,
+ .sg_tablesize = ATA_MAX_PRD
};
static struct ata_port_operations sil_ops = {
.inherits = &ata_bmdma_port_ops,
.dev_config = sil_dev_config,
.set_mode = sil_set_mode,
+ .bmdma_setup = sil_bmdma_setup,
+ .bmdma_start = sil_bmdma_start,
+ .bmdma_stop = sil_bmdma_stop,
+ .qc_prep = sil_qc_prep,
.freeze = sil_freeze,
.thaw = sil_thaw,
.scr_read = sil_scr_read,
@@ -249,6 +264,83 @@ module_param(slow_down, int, 0444);
MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
+static void sil_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
+ void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2;
+
+ /* clear start/stop bit - can safely always write 0 */
+ iowrite8(0, bmdma2);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_sff_dma_pause(ap);
+}
+
+static void sil_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+
+ /* load PRD table addr. */
+ iowrite32(ap->prd_dma, bmdma + ATA_DMA_TABLE_OFS);
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+
+static void sil_bmdma_start(struct ata_queued_cmd *qc)
+{
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ struct ata_port *ap = qc->ap;
+ void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
+ void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2;
+ u8 dmactl = ATA_DMA_START;
+
+ /* set transfer direction, start host DMA transaction
+ Note: For Large Block Transfer to work, the DMA must be started
+ using the bmdma2 register. */
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ iowrite8(dmactl, bmdma2);
+}
+
+/* The way God intended PCI IDE scatter/gather lists to look and behave... */
+static void sil_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct scatterlist *sg;
+ struct ata_port *ap = qc->ap;
+ struct ata_prd *prd, *last_prd = NULL;
+ unsigned int si;
+
+ prd = &ap->prd[0];
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ /* Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ u32 addr = (u32) sg_dma_address(sg);
+ u32 sg_len = sg_dma_len(sg);
+
+ prd->addr = cpu_to_le32(addr);
+ prd->flags_len = cpu_to_le32(sg_len);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len);
+
+ last_prd = prd;
+ prd++;
+ }
+
+ if (likely(last_prd))
+ last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+static void sil_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ sil_fill_sg(qc);
+}
+
static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
{
u8 cache_line = 0;
@@ -278,7 +370,7 @@ static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed)
if (rc)
return rc;
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
if (!ata_dev_enabled(dev))
dev_mode[dev->devno] = 0; /* PIO0/1/2 */
else if (dev->flags & ATA_DFLAG_PIO)
OpenPOWER on IntegriCloud