summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ahci_brcmstb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/ahci_brcmstb.c')
-rw-r--r--drivers/ata/ahci_brcmstb.c61
1 files changed, 58 insertions, 3 deletions
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index 14b7305d2ba0..b36cae2fd04b 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -52,8 +52,10 @@
#define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
#define SATA_TOP_CTRL_PHY_OFFS 0x8
#define SATA_TOP_MAX_PHYS 2
-#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c
-#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20
+
+#define SATA_FIRST_PORT_CTRL 0x700
+#define SATA_NEXT_PORT_CTRL_OFFSET 0x80
+#define SATA_PORT_PCTRL6(reg_base) (reg_base + 0x18)
/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
@@ -69,14 +71,21 @@
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
+enum brcm_ahci_quirks {
+ BRCM_AHCI_QUIRK_NO_NCQ = BIT(0),
+ BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
+};
+
struct brcm_ahci_priv {
struct device *dev;
void __iomem *top_ctrl;
u32 port_mask;
+ u32 quirks;
};
static const struct ata_port_info ahci_brcm_port_info = {
- .flags = AHCI_FLAG_COMMON,
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
+ .link_flags = ATA_LFLAG_NO_DB_DELAY,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops,
@@ -107,6 +116,34 @@ static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
writel_relaxed(val, addr);
}
+static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
+{
+ struct brcm_ahci_priv *priv = hpriv->plat_data;
+ u32 bus_ctrl, port_ctrl, host_caps;
+ int i;
+
+ /* Enable support for ALPM */
+ bus_ctrl = brcm_sata_readreg(priv->top_ctrl +
+ SATA_TOP_CTRL_BUS_CTRL);
+ brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT,
+ priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+ host_caps = readl(hpriv->mmio + HOST_CAP);
+ writel(host_caps | HOST_CAP_ALPM, hpriv->mmio);
+ brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+
+ /*
+ * Adjust timeout to allow PLL sufficient time to lock while waking
+ * up from slumber mode.
+ */
+ for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
+ i < SATA_TOP_MAX_PHYS;
+ i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
+ if (priv->port_mask & BIT(i))
+ writel(0xff1003fc,
+ hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
+ }
+}
+
static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
{
void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
@@ -114,6 +151,9 @@ static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
void __iomem *p;
u32 reg;
+ if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+ return;
+
/* clear PHY_DEFAULT_POWER_STATE */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
reg = brcm_sata_readreg(p);
@@ -143,6 +183,9 @@ static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
void __iomem *p;
u32 reg;
+ if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+ return;
+
/* power-off the PHY digital logic */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
reg = brcm_sata_readreg(p);
@@ -230,6 +273,7 @@ static int brcm_ahci_resume(struct device *dev)
brcm_sata_init(priv);
brcm_sata_phys_enable(priv);
+ brcm_sata_alpm_init(hpriv);
return ahci_platform_resume(dev);
}
#endif
@@ -256,6 +300,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
+ if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
+ priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
+ priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+ }
+
brcm_sata_init(priv);
priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
@@ -269,10 +318,15 @@ static int brcm_ahci_probe(struct platform_device *pdev)
return PTR_ERR(hpriv);
hpriv->plat_data = priv;
+ brcm_sata_alpm_init(hpriv);
+
ret = ahci_platform_enable_resources(hpriv);
if (ret)
return ret;
+ if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
+ hpriv->flags |= AHCI_HFLAG_NO_NCQ;
+
ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
&ahci_platform_sht);
if (ret)
@@ -300,6 +354,7 @@ static int brcm_ahci_remove(struct platform_device *pdev)
}
static const struct of_device_id ahci_of_match[] = {
+ {.compatible = "brcm,bcm7425-ahci"},
{.compatible = "brcm,bcm7445-ahci"},
{},
};
OpenPOWER on IntegriCloud