diff options
Diffstat (limited to 'drivers/acpi/processor_driver.c')
| -rw-r--r-- | drivers/acpi/processor_driver.c | 818 |
1 files changed, 78 insertions, 740 deletions
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index c266cdc11784..823be116619e 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -1,11 +1,13 @@ /* - * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $) + * processor_driver.c - ACPI Processor Driver * * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> * - Added processor hotplug support + * Copyright (C) 2013, Intel Corporation + * Rafael J. Wysocki <rafael.j.wysocki@intel.com> * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * @@ -24,55 +26,26 @@ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * TBD: - * 1. Make # power states dynamic. - * 2. Support duty_cycle values that span bit 4. - * 3. Optimize by having scheduler determine business instead of - * having us try to calculate it here. - * 4. Need C1 timing -- must modify kernel (IRQ handler) to get this. */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/pm.h> #include <linux/cpufreq.h> #include <linux/cpu.h> -#include <linux/dmi.h> -#include <linux/moduleparam.h> #include <linux/cpuidle.h> #include <linux/slab.h> #include <linux/acpi.h> -#include <linux/memory_hotplug.h> - -#include <asm/io.h> -#include <asm/cpu.h> -#include <asm/delay.h> -#include <asm/uaccess.h> -#include <asm/processor.h> -#include <asm/smp.h> -#include <asm/acpi.h> - -#include <acpi/acpi_bus.h> -#include <acpi/acpi_drivers.h> + #include <acpi/processor.h> +#include "internal.h" + #define PREFIX "ACPI: " -#define ACPI_PROCESSOR_CLASS "processor" -#define ACPI_PROCESSOR_DEVICE_NAME "Processor" -#define ACPI_PROCESSOR_FILE_INFO "info" -#define ACPI_PROCESSOR_FILE_THROTTLING "throttling" -#define ACPI_PROCESSOR_FILE_LIMIT "limit" #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 -#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" - -#define ACPI_PROCESSOR_LIMIT_USER 0 -#define ACPI_PROCESSOR_LIMIT_THERMAL 1 #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_driver"); @@ -81,12 +54,8 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI Processor Driver"); MODULE_LICENSE("GPL"); -static int acpi_processor_add(struct acpi_device *device); -static int acpi_processor_remove(struct acpi_device *device); -static void acpi_processor_notify(struct acpi_device *device, u32 event); -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr); -static int acpi_processor_handle_eject(struct acpi_processor *pr); -static int acpi_processor_start(struct acpi_processor *pr); +static int acpi_processor_start(struct device *dev); +static int acpi_processor_stop(struct device *dev); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, @@ -95,295 +64,24 @@ static const struct acpi_device_id processor_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); -static struct acpi_driver acpi_processor_driver = { +static struct device_driver acpi_processor_driver = { .name = "processor", - .class = ACPI_PROCESSOR_CLASS, - .ids = processor_device_ids, - .ops = { - .add = acpi_processor_add, - .remove = acpi_processor_remove, - .notify = acpi_processor_notify, - }, + .bus = &cpu_subsys, + .acpi_match_table = processor_device_ids, + .probe = acpi_processor_start, + .remove = acpi_processor_stop, }; -#define INSTALL_NOTIFY_HANDLER 1 -#define UNINSTALL_NOTIFY_HANDLER 2 - -DEFINE_PER_CPU(struct acpi_processor *, processors); -EXPORT_PER_CPU_SYMBOL(processors); - -struct acpi_processor_errata errata __read_mostly; - -/* -------------------------------------------------------------------------- - Errata Handling - -------------------------------------------------------------------------- */ - -static int acpi_processor_errata_piix4(struct pci_dev *dev) -{ - u8 value1 = 0; - u8 value2 = 0; - - - if (!dev) - return -EINVAL; - - /* - * Note that 'dev' references the PIIX4 ACPI Controller. - */ - - switch (dev->revision) { - case 0: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); - break; - case 1: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n")); - break; - case 2: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n")); - break; - case 3: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n")); - break; - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n")); - break; - } - - switch (dev->revision) { - - case 0: /* PIIX4 A-step */ - case 1: /* PIIX4 B-step */ - /* - * See specification changes #13 ("Manual Throttle Duty Cycle") - * and #14 ("Enabling and Disabling Manual Throttle"), plus - * erratum #5 ("STPCLK# Deassertion Time") from the January - * 2002 PIIX4 specification update. Applies to only older - * PIIX4 models. - */ - errata.piix4.throttle = 1; - - case 2: /* PIIX4E */ - case 3: /* PIIX4M */ - /* - * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA - * Livelock") from the January 2002 PIIX4 specification update. - * Applies to all PIIX4 models. - */ - - /* - * BM-IDE - * ------ - * Find the PIIX4 IDE Controller and get the Bus Master IDE - * Status register address. We'll use this later to read - * each IDE controller's DMA status to make sure we catch all - * DMA activity. - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - errata.piix4.bmisx = pci_resource_start(dev, 4); - pci_dev_put(dev); - } - - /* - * Type-F DMA - * ---------- - * Find the PIIX4 ISA Controller and read the Motherboard - * DMA controller's status to see if Type-F (Fast) DMA mode - * is enabled (bit 7) on either channel. Note that we'll - * disable C3 support if this is enabled, as some legacy - * devices won't operate well if fast DMA is disabled. - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_0, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - pci_read_config_byte(dev, 0x76, &value1); - pci_read_config_byte(dev, 0x77, &value2); - if ((value1 & 0x80) || (value2 & 0x80)) - errata.piix4.fdma = 1; - pci_dev_put(dev); - } - - break; - } - - if (errata.piix4.bmisx) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Bus master activity detection (BM-IDE) erratum enabled\n")); - if (errata.piix4.fdma) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Type-F DMA livelock erratum (C3 disabled)\n")); - - return 0; -} - -static int acpi_processor_errata(struct acpi_processor *pr) +static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) { - int result = 0; - struct pci_dev *dev = NULL; - - - if (!pr) - return -EINVAL; - - /* - * PIIX4 - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID, - PCI_ANY_ID, NULL); - if (dev) { - result = acpi_processor_errata_piix4(dev); - pci_dev_put(dev); - } - - return result; -} - -/* -------------------------------------------------------------------------- - Driver Interface - -------------------------------------------------------------------------- */ - -static int acpi_processor_get_info(struct acpi_device *device) -{ - acpi_status status = 0; - union acpi_object object = { 0 }; - struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; + struct acpi_device *device = data; struct acpi_processor *pr; - int cpu_index, device_declaration = 0; - static int cpu0_initialized; - - pr = acpi_driver_data(device); - if (!pr) - return -EINVAL; - - if (num_online_cpus() > 1) - errata.smp = TRUE; - - acpi_processor_errata(pr); - - /* - * Check to see if we have bus mastering arbitration control. This - * is required for proper C3 usage (to maintain cache coherency). - */ - if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) { - pr->flags.bm_control = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Bus mastering arbitration control present\n")); - } else - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "No bus mastering arbitration control\n")); - - if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { - /* Declared with "Processor" statement; match ProcessorID */ - status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, - "Failed to evaluate processor object (0x%x)\n", - status); - return -ENODEV; - } - - /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in - * arch/xxx/acpi.c - */ - pr->acpi_id = object.processor.proc_id; - } else { - /* - * Declared with "Device" statement; match _UID. - * Note that we don't handle string _UIDs yet. - */ - unsigned long long value; - status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, - NULL, &value); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, - "Failed to evaluate processor _UID (0x%x)\n", - status); - return -ENODEV; - } - device_declaration = 1; - pr->acpi_id = value; - } - cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id); - - /* Handle UP system running SMP kernel, with no LAPIC in MADT */ - if (!cpu0_initialized && (cpu_index == -1) && - (num_online_cpus() == 1)) { - cpu_index = 0; - } - - cpu0_initialized = 1; - - pr->id = cpu_index; - - /* - * Extra Processor objects may be enumerated on MP systems with - * less than the max # of CPUs. They should be ignored _iff - * they are physically not present. - */ - if (pr->id == -1) { - if (ACPI_FAILURE(acpi_processor_hotadd_init(pr))) - return -ENODEV; - } - /* - * On some boxes several processors use the same processor bus id. - * But they are located in different scope. For example: - * \_SB.SCK0.CPU0 - * \_SB.SCK1.CPU0 - * Rename the processor device bus id. And the new bus id will be - * generated as the following format: - * CPU+CPU ID. - */ - sprintf(acpi_device_bid(device), "CPU%X", pr->id); - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, - pr->acpi_id)); - - if (!object.processor.pblk_address) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); - else if (object.processor.pblk_length != 6) - dev_err(&device->dev, "Invalid PBLK length [%d]\n", - object.processor.pblk_length); - else { - pr->throttling.address = object.processor.pblk_address; - pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; - pr->throttling.duty_width = acpi_gbl_FADT.duty_width; - - pr->pblk = object.processor.pblk_address; - - /* - * We don't care about error returns - we just try to mark - * these reserved so that nobody else is confused into thinking - * that this region might be unused.. - * - * (In particular, allocating the IO range for Cardbus) - */ - request_region(pr->throttling.address, 6, "ACPI CPU throttle"); - } - - /* - * If ACPI describes a slot number for this CPU, we can use it - * ensure we get the right value in the "physical id" field - * of /proc/cpuinfo - */ - status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer); - if (ACPI_SUCCESS(status)) - arch_fix_phys_package_id(pr->id, object.integer.value); - - return 0; -} - -static DEFINE_PER_CPU(void *, processor_device_array); - -static void acpi_processor_notify(struct acpi_device *device, u32 event) -{ - struct acpi_processor *pr = acpi_driver_data(device); int saved; + if (device->handle != handle) + return; + + pr = acpi_driver_data(device); if (!pr) return; @@ -420,55 +118,62 @@ static void acpi_processor_notify(struct acpi_device *device, u32 event) return; } -static int acpi_cpu_soft_notify(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static __cpuinit int __acpi_processor_start(struct acpi_device *device); + +static int __cpuinit acpi_cpu_soft_notify(struct notifier_block *nfb, + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; struct acpi_processor *pr = per_cpu(processors, cpu); + struct acpi_device *device; + + if (!pr || acpi_bus_get_device(pr->handle, &device)) + return NOTIFY_DONE; - if (action == CPU_ONLINE && pr) { - /* CPU got physically hotplugged and onlined the first time: - * Initialize missing things + if (action == CPU_ONLINE) { + /* + * CPU got physically hotplugged and onlined for the first time: + * Initialize missing things. */ if (pr->flags.need_hotplug_init) { + int ret; + pr_info("Will online and init hotplugged CPU: %d\n", pr->id); - WARN(acpi_processor_start(pr), "Failed to start CPU:" - " %d\n", pr->id); pr->flags.need_hotplug_init = 0; - /* Normal CPU soft online event */ + ret = __acpi_processor_start(device); + WARN(ret, "Failed to start CPU: %d\n", pr->id); } else { + /* Normal CPU soft online event. */ acpi_processor_ppc_has_changed(pr, 0); acpi_processor_hotplug(pr); acpi_processor_reevaluate_tstate(pr, action); acpi_processor_tstate_has_changed(pr); } - } - if (action == CPU_DEAD && pr) { - /* invalidate the flag.throttling after one CPU is offline */ + } else if (action == CPU_DEAD) { + /* Invalidate flag.throttling after the CPU is offline. */ acpi_processor_reevaluate_tstate(pr, action); } return NOTIFY_OK; } -static struct notifier_block acpi_cpu_notifier = +static struct notifier_block __refdata acpi_cpu_notifier = { .notifier_call = acpi_cpu_soft_notify, }; -/* - * acpi_processor_start() is called by the cpu_hotplug_notifier func: - * acpi_cpu_soft_notify(). Getting it __cpuinit{data} is difficult, the - * root cause seem to be that acpi_processor_uninstall_hotplug_notify() - * is in the module_exit (__exit) func. Allowing acpi_processor_start() - * to not be in __cpuinit section, but being called from __cpuinit funcs - * via __ref looks like the right thing to do here. - */ -static __ref int acpi_processor_start(struct acpi_processor *pr) +static __cpuinit int __acpi_processor_start(struct acpi_device *device) { - struct acpi_device *device = per_cpu(processor_device_array, pr->id); + struct acpi_processor *pr = acpi_driver_data(device); + acpi_status status; int result = 0; + if (!pr) + return -ENODEV; + + if (pr->flags.need_hotplug_init) + return 0; + #ifdef CONFIG_CPU_FREQ acpi_processor_ppc_has_changed(pr, 0); acpi_processor_load_module(pr); @@ -506,462 +211,95 @@ static __ref int acpi_processor_start(struct acpi_processor *pr) goto err_remove_sysfs_thermal; } - return 0; + status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify, device); + if (ACPI_SUCCESS(status)) + return 0; -err_remove_sysfs_thermal: + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + err_remove_sysfs_thermal: sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); -err_thermal_unregister: + err_thermal_unregister: thermal_cooling_device_unregister(pr->cdev); -err_power_exit: + err_power_exit: acpi_processor_power_exit(pr); - return result; } -/* - * Do not put anything in here which needs the core to be online. - * For example MSR access or setting up things which check for cpuinfo_x86 - * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc. - * Such things have to be put in and set up above in acpi_processor_start() - */ -static int __cpuinit acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_start(struct device *dev) { - struct acpi_processor *pr = NULL; - int result = 0; - struct device *dev; - - pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL); - if (!pr) - return -ENOMEM; - - if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { - result = -ENOMEM; - goto err_free_pr; - } - - pr->handle = device->handle; - strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS); - device->driver_data = pr; - - result = acpi_processor_get_info(device); - if (result) { - /* Processor is physically not present */ - return 0; - } + struct acpi_device *device; -#ifdef CONFIG_SMP - if (pr->id >= setup_max_cpus && pr->id != 0) - return 0; -#endif - - BUG_ON(pr->id >= nr_cpu_ids); - - /* - * Buggy BIOS check - * ACPI id of processors can be reported wrongly by the BIOS. - * Don't trust it blindly - */ - if (per_cpu(processor_device_array, pr->id) != NULL && - per_cpu(processor_device_array, pr->id) != device) { - dev_warn(&device->dev, - "BIOS reported wrong ACPI id %d for the processor\n", - pr->id); - result = -ENODEV; - goto err_free_cpumask; - } - per_cpu(processor_device_array, pr->id) = device; + if (acpi_bus_get_device(ACPI_HANDLE(dev), &device)) + return -ENODEV; - per_cpu(processors, pr->id) = pr; - - dev = get_cpu_device(pr->id); - if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) { - result = -EFAULT; - goto err_clear_processor; - } - - /* - * Do not start hotplugged CPUs now, but when they - * are onlined the first time - */ - if (pr->flags.need_hotplug_init) - return 0; - - result = acpi_processor_start(pr); - if (result) - goto err_remove_sysfs; - - return 0; - -err_remove_sysfs: - sysfs_remove_link(&device->dev.kobj, "sysdev"); -err_clear_processor: - /* - * processor_device_array is not cleared to allow checks for buggy BIOS - */ - per_cpu(processors, pr->id) = NULL; -err_free_cpumask: - free_cpumask_var(pr->throttling.shared_cpu_map); -err_free_pr: - kfree(pr); - return result; + return __acpi_processor_start(device); } -static int acpi_processor_remove(struct acpi_device *device) +static int acpi_processor_stop(struct device *dev) { - struct acpi_processor *pr = NULL; + struct acpi_device *device; + struct acpi_processor *pr; + if (acpi_bus_get_device(ACPI_HANDLE(dev), &device)) + return 0; - if (!device || !acpi_driver_data(device)) - return -EINVAL; + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify); pr = acpi_driver_data(device); - - if (pr->id >= nr_cpu_ids) - goto free; - - if (device->removal_type == ACPI_BUS_REMOVAL_EJECT) { - if (acpi_processor_handle_eject(pr)) - return -EINVAL; - } + if (!pr) + return 0; acpi_processor_power_exit(pr); - sysfs_remove_link(&device->dev.kobj, "sysdev"); - if (pr->cdev) { sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); sysfs_remove_link(&pr->cdev->device.kobj, "device"); thermal_cooling_device_unregister(pr->cdev); pr->cdev = NULL; } - - per_cpu(processors, pr->id) = NULL; - per_cpu(processor_device_array, pr->id) = NULL; - try_offline_node(cpu_to_node(pr->id)); - -free: - free_cpumask_var(pr->throttling.shared_cpu_map); - kfree(pr); - return 0; } -#ifdef CONFIG_ACPI_HOTPLUG_CPU -/**************************************************************************** - * Acpi processor hotplug support * - ****************************************************************************/ - -static int is_processor_present(acpi_handle handle) -{ - acpi_status status; - unsigned long long sta = 0; - - - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - - if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT)) - return 1; - - /* - * _STA is mandatory for a processor that supports hot plug - */ - if (status == AE_NOT_FOUND) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor does not support hot plug\n")); - else - ACPI_EXCEPTION((AE_INFO, status, - "Processor Device is not present")); - return 0; -} - -static void acpi_processor_hotplug_notify(acpi_handle handle, - u32 event, void *data) -{ - struct acpi_device *device = NULL; - struct acpi_eject_event *ej_event = NULL; - u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */ - acpi_status status; - int result; - - acpi_scan_lock_acquire(); - - switch (event) { - case ACPI_NOTIFY_BUS_CHECK: - case ACPI_NOTIFY_DEVICE_CHECK: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor driver received %s event\n", - (event == ACPI_NOTIFY_BUS_CHECK) ? - "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK")); - - if (!is_processor_present(handle)) - break; - - if (!acpi_bus_get_device(handle, &device)) - break; - - result = acpi_bus_scan(handle); - if (result) { - acpi_handle_err(handle, "Unable to add the device\n"); - break; - } - result = acpi_bus_get_device(handle, &device); - if (result) { - acpi_handle_err(handle, "Missing device object\n"); - break; - } - ost_code = ACPI_OST_SC_SUCCESS; - break; - - case ACPI_NOTIFY_EJECT_REQUEST: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "received ACPI_NOTIFY_EJECT_REQUEST\n")); - - if (acpi_bus_get_device(handle, &device)) { - acpi_handle_err(handle, - "Device don't exist, dropping EJECT\n"); - break; - } - if (!acpi_driver_data(device)) { - acpi_handle_err(handle, - "Driver data is NULL, dropping EJECT\n"); - break; - } - - ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL); - if (!ej_event) { - acpi_handle_err(handle, "No memory, dropping EJECT\n"); - break; - } - - get_device(&device->dev); - ej_event->device = device; - ej_event->event = ACPI_NOTIFY_EJECT_REQUEST; - /* The eject is carried out asynchronously. */ - status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, - ej_event); - if (ACPI_FAILURE(status)) { - put_device(&device->dev); - kfree(ej_event); - break; - } - goto out; - - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Unsupported event [0x%x]\n", event)); - - /* non-hotplug event; possibly handled by other handler */ - goto out; - } - - /* Inform firmware that the hotplug operation has completed */ - (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL); - - out: - acpi_scan_lock_release(); -} - -static acpi_status is_processor_device(acpi_handle handle) -{ - struct acpi_device_info *info; - char *hid; - acpi_status status; - - status = acpi_get_object_info(handle, &info); - if (ACPI_FAILURE(status)) - return status; - - if (info->type == ACPI_TYPE_PROCESSOR) { - kfree(info); - return AE_OK; /* found a processor object */ - } - - if (!(info->valid & ACPI_VALID_HID)) { - kfree(info); - return AE_ERROR; - } - - hid = info->hardware_id.string; - if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) { - kfree(info); - return AE_ERROR; - } - - kfree(info); - return AE_OK; /* found a processor device object */ -} - -static acpi_status -processor_walk_namespace_cb(acpi_handle handle, - u32 lvl, void *context, void **rv) -{ - acpi_status status; - int *action = context; - - status = is_processor_device(handle); - if (ACPI_FAILURE(status)) - return AE_OK; /* not a processor; continue to walk */ - - switch (*action) { - case INSTALL_NOTIFY_HANDLER: - acpi_install_notify_handler(handle, - ACPI_SYSTEM_NOTIFY, - acpi_processor_hotplug_notify, - NULL); - break; - case UNINSTALL_NOTIFY_HANDLER: - acpi_remove_notify_handler(handle, - ACPI_SYSTEM_NOTIFY, - acpi_processor_hotplug_notify); - break; - default: - break; - } - - /* found a processor; skip walking underneath */ - return AE_CTRL_DEPTH; -} - -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - acpi_handle handle = pr->handle; - - if (!is_processor_present(handle)) { - return AE_ERROR; - } - - if (acpi_map_lsapic(handle, &pr->id)) - return AE_ERROR; - - if (arch_register_cpu(pr->id)) { - acpi_unmap_lsapic(pr->id); - return AE_ERROR; - } - - /* CPU got hot-plugged, but cpu_data is not initialized yet - * Set flag to delay cpu_idle/throttling initialization - * in: - * acpi_processor_add() - * acpi_processor_get_info() - * and do it when the CPU gets online the first time - * TBD: Cleanup above functions and try to do this more elegant. - */ - pr_info("CPU %d got hotplugged\n", pr->id); - pr->flags.need_hotplug_init = 1; - - return AE_OK; -} - -static int acpi_processor_handle_eject(struct acpi_processor *pr) -{ - if (cpu_online(pr->id)) - cpu_down(pr->id); - - get_online_cpus(); - /* - * The cpu might become online again at this point. So we check whether - * the cpu has been onlined or not. If the cpu became online, it means - * that someone wants to use the cpu. So acpi_processor_handle_eject() - * returns -EAGAIN. - */ - if (unlikely(cpu_online(pr->id))) { - put_online_cpus(); - pr_warn("Failed to remove CPU %d, because other task " - "brought the CPU back online\n", pr->id); - return -EAGAIN; - } - arch_unregister_cpu(pr->id); - acpi_unmap_lsapic(pr->id); - put_online_cpus(); - return (0); -} -#else -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - return AE_ERROR; -} -static int acpi_processor_handle_eject(struct acpi_processor *pr) -{ - return (-EINVAL); -} -#endif - -static -void acpi_processor_install_hotplug_notify(void) -{ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - int action = INSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_ANY, - ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - processor_walk_namespace_cb, NULL, &action, NULL); -#endif - register_hotcpu_notifier(&acpi_cpu_notifier); -} - -static -void acpi_processor_uninstall_hotplug_notify(void) -{ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - int action = UNINSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_ANY, - ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - processor_walk_namespace_cb, NULL, &action, NULL); -#endif - unregister_hotcpu_notifier(&acpi_cpu_notifier); -} - /* * We keep the driver loaded even when ACPI is not running. * This is needed for the powernow-k8 driver, that works even without * ACPI, but needs symbols from this driver */ -static int __init acpi_processor_init(void) +static int __init acpi_processor_driver_init(void) { int result = 0; if (acpi_disabled) return 0; - result = acpi_bus_register_driver(&acpi_processor_driver); + result = driver_register(&acpi_processor_driver); if (result < 0) return result; acpi_processor_syscore_init(); - - acpi_processor_install_hotplug_notify(); - + register_hotcpu_notifier(&acpi_cpu_notifier); acpi_thermal_cpufreq_init(); - acpi_processor_ppc_init(); - acpi_processor_throttling_init(); - return 0; } -static void __exit acpi_processor_exit(void) +static void __exit acpi_processor_driver_exit(void) { if (acpi_disabled) return; acpi_processor_ppc_exit(); - acpi_thermal_cpufreq_exit(); - - acpi_processor_uninstall_hotplug_notify(); - + unregister_hotcpu_notifier(&acpi_cpu_notifier); acpi_processor_syscore_exit(); - - acpi_bus_unregister_driver(&acpi_processor_driver); - - return; + driver_unregister(&acpi_processor_driver); } -module_init(acpi_processor_init); -module_exit(acpi_processor_exit); +module_init(acpi_processor_driver_init); +module_exit(acpi_processor_driver_exit); MODULE_ALIAS("processor"); |
