diff options
Diffstat (limited to 'drivers/acpi/acpica/nspredef.c')
| -rw-r--r-- | drivers/acpi/acpica/nspredef.c | 1065 |
1 files changed, 1065 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c new file mode 100644 index 000000000000..1e682d03f620 --- /dev/null +++ b/drivers/acpi/acpica/nspredef.c @@ -0,0 +1,1065 @@ +/****************************************************************************** + * + * Module Name: nspredef - Validation of ACPI predefined methods and objects + * $Revision: 1.1 $ + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include <acpi/accommon.h> +#include <acpi/acnamesp.h> +#include <acpi/acpredef.h> + +#define _COMPONENT ACPI_NAMESPACE +ACPI_MODULE_NAME("nspredef") + +/******************************************************************************* + * + * This module validates predefined ACPI objects that appear in the namespace, + * at the time they are evaluated (via acpi_evaluate_object). The purpose of this + * validation is to detect problems with BIOS-exposed predefined ACPI objects + * before the results are returned to the ACPI-related drivers. + * + * There are several areas that are validated: + * + * 1) The number of input arguments as defined by the method/object in the + * ASL is validated against the ACPI specification. + * 2) The type of the return object (if any) is validated against the ACPI + * specification. + * 3) For returned package objects, the count of package elements is + * validated, as well as the type of each package element. Nested + * packages are supported. + * + * For any problems found, a warning message is issued. + * + ******************************************************************************/ +/* Local prototypes */ +static acpi_status +acpi_ns_check_package(char *pathname, + union acpi_operand_object **return_object_ptr, + const union acpi_predefined_info *predefined); + +static acpi_status +acpi_ns_check_package_elements(char *pathname, + union acpi_operand_object **elements, + u8 type1, u32 count1, u8 type2, u32 count2); + +static acpi_status +acpi_ns_check_object_type(char *pathname, + union acpi_operand_object **return_object_ptr, + u32 expected_btypes, u32 package_index); + +static acpi_status +acpi_ns_check_reference(char *pathname, + union acpi_operand_object *return_object); + +static acpi_status +acpi_ns_repair_object(u32 expected_btypes, + u32 package_index, + union acpi_operand_object **return_object_ptr); + +/* + * Names for the types that can be returned by the predefined objects. + * Used for warning messages. Must be in the same order as the ACPI_RTYPEs + */ +static const char *acpi_rtype_names[] = { + "/Integer", + "/String", + "/Buffer", + "/Package", + "/Reference", +}; + +#define ACPI_NOT_PACKAGE ACPI_UINT32_MAX + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_predefined_names + * + * PARAMETERS: Node - Namespace node for the method/object + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status + * + * DESCRIPTION: Check an ACPI name for a match in the predefined name list. + * + ******************************************************************************/ + +acpi_status +acpi_ns_check_predefined_names(struct acpi_namespace_node *node, + u32 user_param_count, + acpi_status return_status, + union acpi_operand_object **return_object_ptr) +{ + union acpi_operand_object *return_object = *return_object_ptr; + acpi_status status = AE_OK; + const union acpi_predefined_info *predefined; + char *pathname; + + /* Match the name for this method/object against the predefined list */ + + predefined = acpi_ns_check_for_predefined_name(node); + + /* Get the full pathname to the object, for use in error messages */ + + pathname = acpi_ns_get_external_pathname(node); + if (!pathname) { + pathname = ACPI_CAST_PTR(char, predefined->info.name); + } + + /* + * Check that the parameter count for this method matches the ASL + * definition. For predefined names, ensure that both the caller and + * the method itself are in accordance with the ACPI specification. + */ + acpi_ns_check_parameter_count(pathname, node, user_param_count, + predefined); + + /* If not a predefined name, we cannot validate the return object */ + + if (!predefined) { + goto exit; + } + + /* If the method failed, we cannot validate the return object */ + + if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) { + goto exit; + } + + /* + * Only validate the return value on the first successful evaluation of + * the method. This ensures that any warnings will only be emitted during + * the very first evaluation of the method/object. + */ + if (node->flags & ANOBJ_EVALUATED) { + goto exit; + } + + /* Mark the node as having been successfully evaluated */ + + node->flags |= ANOBJ_EVALUATED; + + /* + * If there is no return value, check if we require a return value for + * this predefined name. Either one return value is expected, or none, + * for both methods and other objects. + * + * Exit now if there is no return object. Warning if one was expected. + */ + if (!return_object) { + if ((predefined->info.expected_btypes) && + (!(predefined->info.expected_btypes & ACPI_RTYPE_NONE))) { + ACPI_ERROR((AE_INFO, + "%s: Missing expected return value", + pathname)); + + status = AE_AML_NO_RETURN_VALUE; + } + goto exit; + } + + /* + * We have a return value, but if one wasn't expected, just exit, this is + * not a problem + * + * For example, if the "Implicit Return" feature is enabled, methods will + * always return a value + */ + if (!predefined->info.expected_btypes) { + goto exit; + } + + /* + * Check that the type of the return object is what is expected for + * this predefined name + */ + status = acpi_ns_check_object_type(pathname, return_object_ptr, + predefined->info.expected_btypes, + ACPI_NOT_PACKAGE); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* For returned Package objects, check the type of all sub-objects */ + + if (ACPI_GET_OBJECT_TYPE(return_object) == ACPI_TYPE_PACKAGE) { + status = + acpi_ns_check_package(pathname, return_object_ptr, + predefined); + } + + exit: + if (pathname != predefined->info.name) { + ACPI_FREE(pathname); + } + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_parameter_count + * + * PARAMETERS: Pathname - Full pathname to the node (for error msgs) + * Node - Namespace node for the method/object + * user_param_count - Number of args passed in by the caller + * Predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that the declared (in ASL/AML) parameter count for a + * predefined name is what is expected (i.e., what is defined in + * the ACPI specification for this predefined name.) + * + ******************************************************************************/ + +void +acpi_ns_check_parameter_count(char *pathname, + struct acpi_namespace_node *node, + u32 user_param_count, + const union acpi_predefined_info *predefined) +{ + u32 param_count; + u32 required_params_current; + u32 required_params_old; + + /* Methods have 0-7 parameters. All other types have zero. */ + + param_count = 0; + if (node->type == ACPI_TYPE_METHOD) { + param_count = node->object->method.param_count; + } + + /* Argument count check for non-predefined methods/objects */ + + if (!predefined) { + /* + * Warning if too few or too many arguments have been passed by the + * caller. An incorrect number of arguments may not cause the method + * to fail. However, the method will fail if there are too few + * arguments and the method attempts to use one of the missing ones. + */ + if (user_param_count < param_count) { + ACPI_WARNING((AE_INFO, + "%s: Insufficient arguments - needs %d, found %d", + pathname, param_count, user_param_count)); + } else if (user_param_count > param_count) { + ACPI_WARNING((AE_INFO, + "%s: Excess arguments - needs %d, found %d", + pathname, param_count, user_param_count)); + } + return; + } + + /* Allow two different legal argument counts (_SCP, etc.) */ + + required_params_current = predefined->info.param_count & 0x0F; + required_params_old = predefined->info.param_count >> 4; + + if (user_param_count != ACPI_UINT32_MAX) { + + /* Validate the user-supplied parameter count */ + + if ((user_param_count != required_params_current) && + (user_param_count != required_params_old)) { + ACPI_WARNING((AE_INFO, + "%s: Parameter count mismatch - caller passed %d, ACPI requires %d", + pathname, user_param_count, + required_params_current)); + } + } + + /* + * Only validate the argument count on the first successful evaluation of + * the method. This ensures that any warnings will only be emitted during + * the very first evaluation of the method/object. + */ + if (node->flags & ANOBJ_EVALUATED) { + return; + } + + /* + * Check that the ASL-defined parameter count is what is expected for + * this predefined name. + */ + if ((param_count != required_params_current) && + (param_count != required_params_old)) { + ACPI_WARNING((AE_INFO, + "%s: Parameter count mismatch - ASL declared %d, ACPI requires %d", + pathname, param_count, required_params_current)); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_for_predefined_name + * + * PARAMETERS: Node - Namespace node for the method/object + * + * RETURN: Pointer to entry in predefined table. NULL indicates not found. + * + * DESCRIPTION: Check an object name against the predefined object list. + * + ******************************************************************************/ + +const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct + acpi_namespace_node + *node) +{ + const union acpi_predefined_info *this_name; + + /* Quick check for a predefined name, first character must be underscore */ + + if (node->name.ascii[0] != '_') { + return (NULL); + } + + /* Search info table for a predefined method/object name */ + + this_name = predefined_names; + while (this_name->info.name[0]) { + if (ACPI_COMPARE_NAME(node->name.ascii, this_name->info.name)) { + + /* Return pointer to this table entry */ + + return (this_name); + } + + /* + * Skip next entry in the table if this name returns a Package + * (next entry contains the package info) + */ + if (this_name->info.expected_btypes & ACPI_RTYPE_PACKAGE) { + this_name++; + } + + this_name++; + } + + return (NULL); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_package + * + * PARAMETERS: Pathname - Full pathname to the node (for error msgs) + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * Predefined - Pointer to entry in predefined name table + * + * RETURN: Status + * + * DESCRIPTION: Check a returned package object for the correct count and + * correct type of all sub-objects. + * + ******************************************************************************/ + +static acpi_status +acpi_ns_check_package(char *pathname, + union acpi_operand_object **return_object_ptr, + const union acpi_predefined_info *predefined) +{ + union acpi_operand_object *return_object = *return_object_ptr; + const union acpi_predefined_info *package; + union acpi_operand_object *sub_package; + union acpi_operand_object **elements; + union acpi_operand_object **sub_elements; + acpi_status status; + u32 expected_count; + u32 count; + u32 i; + u32 j; + + ACPI_FUNCTION_NAME(ns_check_package); + + /* The package info for this name is in the next table entry */ + + package = predefined + 1; + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, + "%s Validating return Package of Type %X, Count %X\n", + pathname, package->ret_info.type, + return_object->package.count)); + + /* Extract package count and elements array */ + + elements = return_object->package.elements; + count = return_object->package.count; + + /* The package must have at least one element, else invalid */ + + if (!count) { + ACPI_WARNING((AE_INFO, + "%s: Return Package has no elements (empty)", + pathname)); + + return (AE_AML_OPERAND_VALUE); + } + + /* + * Decode the type of the expected package contents + * + * PTYPE1 packages contain no subpackages + * PTYPE2 packages contain sub-packages + */ + switch (package->ret_info.type) { + case ACPI_PTYPE1_FIXED: + + /* + * The package count is fixed and there are no sub-packages + * + * If package is too small, exit. + * If package is larger than expected, issue warning but continue + */ + expected_count = + package->ret_info.count1 + package->ret_info.count2; + if (count < expected_count) { + goto package_too_small; + } else if (count > expected_count) { + ACPI_WARNING((AE_INFO, + "%s: Return Package is larger than needed - " + "found %u, expected %u", pathname, count, + expected_count)); + } + + /* Validate all elements of the returned package */ + + status = acpi_ns_check_package_elements(pathname, elements, + package->ret_info. + object_type1, + package->ret_info. + count1, + package->ret_info. + object_type2, + package->ret_info. + count2); + if (ACPI_FAILURE(status)) { + return (status); + } + break; + + case ACPI_PTYPE1_VAR: + + /* + * The package count is variable, there are no sub-packages, and all + * elements must be of the same type + */ + for (i = 0; i < count; i++) { + status = acpi_ns_check_object_type(pathname, elements, + package->ret_info. + object_type1, i); + if (ACPI_FAILURE(status)) { + return (status); + } + elements++; + } + break; + + case ACPI_PTYPE1_OPTION: + + /* + * The package count is variable, there are no sub-packages. There are + * a fixed number of required elements, and a variable number of + * optional elements. + * + * Check if package is at least as large as the minimum required + */ + expected_count = package->ret_info3.count; + if (count < expected_count) { + goto package_too_small; + } + + /* Variable number of sub-objects */ + + for (i = 0; i < count; i++) { + if (i < package->ret_info3.count) { + + /* These are the required package elements (0, 1, or 2) */ + + status = + acpi_ns_check_object_type(pathname, + elements, + package-> + ret_info3. + object_type[i], + i); + if (ACPI_FAILURE(status)) { + return (status); + } + } else { + /* These are the optional package elements */ + + status = + acpi_ns_check_object_type(pathname, + elements, + package-> + ret_info3. + tail_object_type, + i); + if (ACPI_FAILURE(status)) { + return (status); + } + } + elements++; + } + break; + + case ACPI_PTYPE2_PKG_COUNT: + + /* First element is the (Integer) count of sub-packages to follow */ + + status = acpi_ns_check_object_type(pathname, elements, + ACPI_RTYPE_INTEGER, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * Count cannot be larger than the parent package length, but allow it + * to be smaller. The >= accounts for the Integer above. + */ + expected_count = (u32) (*elements)->integer.value; + if (expected_count >= count) { + goto package_too_small; + } + + count = expected_count; + elements++; + + /* Now we can walk the sub-packages */ + + /*lint -fallthrough */ + + case ACPI_PTYPE2: + case ACPI_PTYPE2_FIXED: + case ACPI_PTYPE2_MIN: + case ACPI_PTYPE2_COUNT: + + /* + * These types all return a single package that consists of a variable + * number of sub-packages + */ + for (i = 0; i < count; i++) { + sub_package = *elements; + sub_elements = sub_package->package.elements; + + /* Each sub-object must be of type Package */ + + status = + acpi_ns_check_object_type(pathname, &sub_package, + ACPI_RTYPE_PACKAGE, i); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Examine the different types of sub-packages */ + + switch (package->ret_info.type) { + case ACPI_PTYPE2: + case ACPI_PTYPE2_PKG_COUNT: + + /* Each subpackage has a fixed number of elements */ + + expected_count = + package->ret_info.count1 + + package->ret_info.count2; + if (sub_package->package.count != + expected_count) { + count = sub_package->package.count; + goto package_too_small; + } + + status = + acpi_ns_check_package_elements(pathname, + sub_elements, + package-> + ret_info. + object_type1, + package-> + ret_info. + count1, + package-> + ret_info. + object_type2, + package-> + ret_info. + count2); + if (ACPI_FAILURE(status)) { + return (status); + } + break; + + case ACPI_PTYPE2_FIXED: + + /* Each sub-package has a fixed length */ + + expected_count = package->ret_info2.count; + if (sub_package->package.count < expected_count) { + count = sub_package->package.count; + goto package_too_small; + } + + /* Check the type of each sub-package element */ + + for (j = 0; j < expected_count; j++) { + status = + acpi_ns_check_object_type(pathname, + &sub_elements[j], + package->ret_info2.object_type[j], j); + if (ACPI_FAILURE(status)) { + return (status); + } + } + break; + + case ACPI_PTYPE2_MIN: + + /* Each sub-package has a variable but minimum length */ + + expected_count = package->ret_info.count1; + if (sub_package->package.count < expected_count) { + count = sub_package->package.count; + goto package_too_small; + } + + /* Check the type of each sub-package element */ + + status = + acpi_ns_check_package_elements(pathname, + sub_elements, + package-> + ret_info. + object_type1, + sub_package-> + package. + count, 0, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + break; + + case ACPI_PTYPE2_COUNT: + + /* First element is the (Integer) count of elements to follow */ + + status = + acpi_ns_check_object_type(pathname, + sub_elements, + ACPI_RTYPE_INTEGER, + 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Make sure package is large enough for the Count */ + + expected_count = + (u32) (*sub_elements)->integer.value; + if (sub_package->package.count < expected_count) { + count = sub_package->package.count; + goto package_too_small; + } + + /* Check the type of each sub-package element */ + + status = + acpi_ns_check_package_elements(pathname, + (sub_elements + + 1), + package-> + ret_info. + object_type1, + (expected_count + - 1), 0, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + break; + + default: + break; + } + + elements++; + } + break; + + default: + + /* Should not get here if predefined info table is correct */ + + ACPI_WARNING((AE_INFO, + "%s: Invalid internal return type in table entry: %X", + pathname, package->ret_info.type)); + + return (AE_AML_INTERNAL); + } + + return (AE_OK); + + package_too_small: + + /* Error exit for the case with an incorrect package count */ + + ACPI_WARNING((AE_INFO, "%s: Return Package is too small - " + "found %u, expected %u", pathname, count, + expected_count)); + + return (AE_AML_OPERAND_VALUE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_package_elements + * + * PARAMETERS: Pathname - Full pathname to the node (for error msgs) + * Elements - Pointer to the package elements array + * Type1 - Object type for first group + * Count1 - Count for first group + * Type2 - Object type for second group + * Count2 - Count for second group + * + * RETURN: Status + * + * DESCRIPTION: Check that all elements of a package are of the correct object + * type. Supports up to two groups of different object types. + * + ******************************************************************************/ + +static acpi_status +acpi_ns_check_package_elements(char *pathname, + union acpi_operand_object **elements, + u8 type1, u32 count1, u8 type2, u32 count2) +{ + union acpi_operand_object **this_element = elements; + acpi_status status; + u32 i; + + /* + * Up to two groups of package elements are supported by the data + * structure. All elements in each group must be of the same type. + * The second group can have a count of zero. + */ + for (i = 0; i < count1; i++) { + status = acpi_ns_check_object_type(pathname, this_element, + type1, i); + if (ACPI_FAILURE(status)) { + return (status); + } + this_element++; + } + + for (i = 0; i < count2; i++) { + status = acpi_ns_check_object_type(pathname, this_element, + type2, (i + count1)); + if (ACPI_FAILURE(status)) { + return (status); + } + this_element++; + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_object_type + * + * PARAMETERS: Pathname - Full pathname to the node (for error msgs) + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * expected_btypes - Bitmap of expected return type(s) + * package_index - Index of object within parent package (if + * applicable - ACPI_NOT_PACKAGE otherwise) + * + * RETURN: Status + * + * DESCRIPTION: Check the type of the return object against the expected object + * type(s). Use of Btype allows multiple expected object types. + * + ******************************************************************************/ + +static acpi_status +acpi_ns_check_object_type(char *pathname, + union acpi_operand_object **return_object_ptr, + u32 expected_btypes, u32 package_index) +{ + union acpi_operand_object *return_object = *return_object_ptr; + acpi_status status = AE_OK; + u32 return_btype; + char type_buffer[48]; /* Room for 5 types */ + u32 this_rtype; + u32 i; + u32 j; + + /* + * If we get a NULL return_object here, it is a NULL package element, + * and this is always an error. + */ + if (!return_object) { + goto type_error_exit; + } + + /* A Namespace node should not get here, but make sure */ + + if (ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) { + ACPI_WARNING((AE_INFO, + "%s: Invalid return type - Found a Namespace node [%4.4s] type %s", + pathname, return_object->node.name.ascii, + acpi_ut_get_type_name(return_object->node.type))); + return (AE_AML_OPERAND_TYPE); + } + + /* + * Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type. + * The bitmapped type allows multiple possible return types. + * + * Note, the cases below must handle all of the possible types returned + * from all of the predefined names (including elements of returned + * packages) + */ + switch (ACPI_GET_OBJECT_TYPE(return_object)) { + case ACPI_TYPE_INTEGER: + return_btype = ACPI_RTYPE_INTEGER; + break; + + case ACPI_TYPE_BUFFER: + return_btype = ACPI_RTYPE_BUFFER; + break; + + case ACPI_TYPE_STRING: + return_btype = ACPI_RTYPE_STRING; + break; + + case ACPI_TYPE_PACKAGE: + return_btype = ACPI_RTYPE_PACKAGE; + break; + + case ACPI_TYPE_LOCAL_REFERENCE: + return_btype = ACPI_RTYPE_REFERENCE; + break; + + default: + /* Not one of the supported objects, must be incorrect */ + + goto type_error_exit; + } + + /* Is the object one of the expected types? */ + + if (!(return_btype & expected_btypes)) { + + /* Type mismatch -- attempt repair of the returned object */ + + status = acpi_ns_repair_object(expected_btypes, package_index, + return_object_ptr); + if (ACPI_SUCCESS(status)) { + return (status); + } + goto type_error_exit; + } + + /* For reference objects, check that the reference type is correct */ + + if (ACPI_GET_OBJECT_TYPE(return_object) == ACPI_TYPE_LOCAL_REFERENCE) { + status = acpi_ns_check_reference(pathname, return_object); + } + + return (status); + + type_error_exit: + + /* Create a string with all expected types for this predefined object */ + + j = 1; + type_buffer[0] = 0; + this_rtype = ACPI_RTYPE_INTEGER; + + for (i = 0; i < ACPI_NUM_RTYPES; i++) { + + /* If one of the expected types, concatenate the name of this type */ + + if (expected_btypes & this_rtype) { + ACPI_STRCAT(type_buffer, &acpi_rtype_names[i][j]); + j = 0; /* Use name separator from now on */ + } + this_rtype <<= 1; /* Next Rtype */ + } + + if (package_index == ACPI_NOT_PACKAGE) { + ACPI_WARNING((AE_INFO, + "%s: Return type mismatch - found %s, expected %s", + pathname, + acpi_ut_get_object_type_name(return_object), + type_buffer)); + } else { + ACPI_WARNING((AE_INFO, + "%s: Return Package type mismatch at index %u - " + "found %s, expected %s", pathname, package_index, + acpi_ut_get_object_type_name(return_object), + type_buffer)); + } + + return (AE_AML_OPERAND_TYPE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_reference + * + * PARAMETERS: Pathname - Full pathname to the node (for error msgs) + * return_object - Object returned from the evaluation of a + * method or object + * + * RETURN: Status + * + * DESCRIPTION: Check a returned reference object for the correct reference + * type. The only reference type that can be returned from a + * predefined method is a named reference. All others are invalid. + * + ******************************************************************************/ + +static acpi_status +acpi_ns_check_reference(char *pathname, + union acpi_operand_object *return_object) +{ + + /* + * Check the reference object for the correct reference type (opcode). + * The only type of reference that can be converted to an union acpi_object is + * a reference to a named object (reference class: NAME) + */ + if (return_object->reference.class == ACPI_REFCLASS_NAME) { + return (AE_OK); + } + + ACPI_WARNING((AE_INFO, + "%s: Return type mismatch - unexpected reference object type [%s] %2.2X", + pathname, acpi_ut_get_reference_name(return_object), + return_object->reference.class)); + + return (AE_AML_OPERAND_TYPE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_repair_object + * + * PARAMETERS: Pathname - Full pathname to the node (for error msgs) + * package_index - Used to determine if target is in a package + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status. AE_OK if repair was successful. + * + * DESCRIPTION: Attempt to repair/convert a return object of a type that was + * not expected. + * + ******************************************************************************/ + +static acpi_status +acpi_ns_repair_object(u32 expected_btypes, + u32 package_index, + union acpi_operand_object **return_object_ptr) +{ + union acpi_operand_object *return_object = *return_object_ptr; + union acpi_operand_object *new_object; + acpi_size length; + + switch (ACPI_GET_OBJECT_TYPE(return_object)) { + case ACPI_TYPE_BUFFER: + + if (!(expected_btypes & ACPI_RTYPE_STRING)) { + return (AE_AML_OPERAND_TYPE); + } + + /* + * Have a Buffer, expected a String, convert. Use a to_string + * conversion, no transform performed on the buffer data. The best + * example of this is the _BIF method, where the string data from + * the battery is often (incorrectly) returned as buffer object(s). + */ + length = 0; + while ((length < return_object->buffer.length) && + (return_object->buffer.pointer[length])) { + length++; + } + + /* Allocate a new string object */ + + new_object = acpi_ut_create_string_object(length); + if (!new_object) { + return (AE_NO_MEMORY); + } + + /* + * Copy the raw buffer data with no transform. String is already NULL + * terminated at Length+1. + */ + ACPI_MEMCPY(new_object->string.pointer, + return_object->buffer.pointer, length); + + /* Install the new return object */ + + acpi_ut_remove_reference(return_object); + *return_object_ptr = new_object; + + /* + * If the object is a package element, we need to: + * 1. Decrement the reference count of the orignal object, it was + * incremented when building the package + * 2. Increment the reference count of the new object, it will be + * decremented when releasing the package + */ + if (package_index != ACPI_NOT_PACKAGE) { + acpi_ut_remove_reference(return_object); + acpi_ut_add_reference(new_object); + } + return (AE_OK); + + default: + break; + } + + return (AE_AML_OPERAND_TYPE); +} |
