diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-omap2/clkt2xxx_apll.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 20 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clkt_clksel.c | 91 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clkt_dpll.c | 26 | ||||
-rw-r--r-- | arch/arm/mach-omap2/clock.c | 11 | ||||
-rw-r--r-- | arch/arm/mach-omap2/dpll3xxx.c | 48 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap2/pm.c | 2 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/clock.h | 5 |
10 files changed, 135 insertions, 86 deletions
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index b19a1f7234ae..c2d15212d64d 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -59,7 +59,7 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); omap2_cm_wait_idlest(cm_idlest_pll, status_mask, - OMAP24XX_CM_IDLEST_VAL, clk->name); + OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk)); /* * REVISIT: Should we return an error code if omap2_wait_clock_ready() diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index cabcfdba5246..3524f0e7b6d5 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -68,14 +68,15 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk) long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) { const struct prcm_config *ptr; - long highest_rate; + long highest_rate, sys_clk_rate; highest_rate = -EINVAL; + sys_clk_rate = __clk_get_rate(sclk); for (ptr = rate_table; ptr->mpu_speed; ptr++) { if (!(ptr->flags & cpu_mask)) continue; - if (ptr->xtal_speed != sclk->rate) + if (ptr->xtal_speed != sys_clk_rate) continue; highest_rate = ptr->mpu_speed; @@ -94,12 +95,15 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; + long sys_clk_rate; + + sys_clk_rate = __clk_get_rate(sclk); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sclk->rate) + if (prcm->xtal_speed != sys_clk_rate) continue; if (prcm->mpu_speed <= rate) { diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index d6e34dd9e7e7..0fd8b70201e4 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -56,6 +56,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) struct omap_sdrc_params *sdrc_cs0; struct omap_sdrc_params *sdrc_cs1; int ret; + unsigned long clkrate; if (!clk || !rate) return -EINVAL; @@ -64,11 +65,12 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (validrate != rate) return -EINVAL; - sdrcrate = sdrc_ick_p->rate; - if (rate > clk->rate) - sdrcrate <<= ((rate / clk->rate) >> 1); + sdrcrate = __clk_get_rate(sdrc_ick_p); + clkrate = __clk_get_rate(clk); + if (rate > clkrate) + sdrcrate <<= ((rate / clkrate) >> 1); else - sdrcrate >>= ((clk->rate / rate) >> 1); + sdrcrate >>= ((clkrate / rate) >> 1); ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); if (ret) @@ -82,7 +84,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) /* * XXX This only needs to be done when the CPU frequency changes */ - _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ; + _mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; c += 1; /* for safety */ c *= SDRC_MPURATE_LOOPS; @@ -90,8 +92,8 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (c == 0) c = 1; - pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, - validrate); + pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", + clkrate, validrate); pr_debug("clock: SDRC CS0 timing params used:" " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, @@ -104,14 +106,14 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (sdrc_cs1) omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clk->rate, + new_div, unlock_dll, c, rate > clkrate, sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); else omap3_configure_core_dpll( - new_div, unlock_dll, c, rate > clk->rate, + new_div, unlock_dll, c, rate > clkrate, sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, 0, 0, 0, 0); diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index 04d551b1f7f7..33382fb46cc1 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -71,8 +71,8 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk, if (!clks->parent) { /* This indicates a data problem */ - WARN(1, "clock: Could not find parent clock %s in clksel array " - "of clock %s\n", src_clk->name, clk->name); + WARN(1, "clock: %s: could not find parent clock %s in clksel array\n", + __clk_get_name(clk), __clk_get_name(src_clk)); return NULL; } @@ -126,8 +126,9 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk, if (max_div == 0) { /* This indicates an error in the clksel data */ - WARN(1, "clock: Could not find divisor for clock %s parent %s" - "\n", clk->name, src_clk->parent->name); + WARN(1, "clock: %s: could not find divisor for parent %s\n", + __clk_get_name(clk), + __clk_get_name(__clk_get_parent(src_clk))); return 0; } @@ -176,8 +177,10 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val) { const struct clksel *clks; const struct clksel_rate *clkr; + struct clk *parent; - clks = _get_clksel_by_parent(clk, clk->parent); + parent = __clk_get_parent(clk); + clks = _get_clksel_by_parent(clk, parent); if (!clks) return 0; @@ -191,8 +194,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val) if (!clkr->div) { /* This indicates a data error */ - WARN(1, "clock: Could not find fieldval %d for clock %s parent " - "%s\n", field_val, clk->name, clk->parent->name); + WARN(1, "clock: %s: could not find fieldval %d for parent %s\n", + __clk_get_name(clk), field_val, __clk_get_name(parent)); return 0; } @@ -213,11 +216,13 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div) { const struct clksel *clks; const struct clksel_rate *clkr; + struct clk *parent; /* should never happen */ WARN_ON(div == 0); - clks = _get_clksel_by_parent(clk, clk->parent); + parent = __clk_get_parent(clk); + clks = _get_clksel_by_parent(clk, parent); if (!clks) return ~0; @@ -230,8 +235,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div) } if (!clkr->div) { - pr_err("clock: Could not find divisor %d for clock %s parent " - "%s\n", div, clk->name, clk->parent->name); + pr_err("clock: %s: could not find divisor %d for parent %s\n", + __clk_get_name(clk), div, __clk_get_name(parent)); return ~0; } @@ -281,16 +286,23 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, const struct clksel *clks; const struct clksel_rate *clkr; u32 last_div = 0; + struct clk *parent; + unsigned long parent_rate; + const char *clk_name; + + parent = __clk_get_parent(clk); + parent_rate = __clk_get_rate(parent); + clk_name = __clk_get_name(clk); if (!clk->clksel || !clk->clksel_mask) return ~0; pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", - clk->name, target_rate); + clk_name, target_rate); *new_div = 1; - clks = _get_clksel_by_parent(clk, clk->parent); + clks = _get_clksel_by_parent(clk, parent); if (!clks) return ~0; @@ -300,30 +312,29 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, /* Sanity check */ if (clkr->div <= last_div) - pr_err("clock: clksel_rate table not sorted " - "for clock %s", clk->name); + pr_err("clock: %s: clksel_rate table not sorted\n", + clk_name); last_div = clkr->div; - test_rate = clk->parent->rate / clkr->div; + test_rate = parent_rate / clkr->div; if (test_rate <= target_rate) break; /* found it */ } if (!clkr->div) { - pr_err("clock: Could not find divisor for target " - "rate %ld for clock %s parent %s\n", target_rate, - clk->name, clk->parent->name); + pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n", + clk_name, target_rate, __clk_get_name(parent)); return ~0; } *new_div = clkr->div; pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, - (clk->parent->rate / clkr->div)); + (parent_rate / clkr->div)); - return clk->parent->rate / clkr->div; + return parent_rate / clkr->div; } /* @@ -345,10 +356,15 @@ void omap2_init_clksel_parent(struct clk *clk) const struct clksel *clks; const struct clksel_rate *clkr; u32 r, found = 0; + struct clk *parent; + const char *clk_name; if (!clk->clksel || !clk->clksel_mask) return; + parent = __clk_get_parent(clk); + clk_name = __clk_get_name(clk); + r = __raw_readl(clk->clksel_reg) & clk->clksel_mask; r >>= __ffs(clk->clksel_mask); @@ -358,12 +374,14 @@ void omap2_init_clksel_parent(struct clk *clk) continue; if (clkr->val == r) { - if (clk->parent != clks->parent) { + if (parent != clks->parent) { pr_debug("clock: inited %s parent " "to %s (was %s)\n", - clk->name, clks->parent->name, - ((clk->parent) ? - clk->parent->name : "NULL")); + clk_name, + __clk_get_name(clks->parent), + ((parent) ? + __clk_get_name(parent) : + "NULL")); clk_reparent(clk, clks->parent); }; found = 1; @@ -373,7 +391,7 @@ void omap2_init_clksel_parent(struct clk *clk) /* This indicates a data error */ WARN(!found, "clock: %s: init parent: could not find regval %0x\n", - clk->name, r); + clk_name, r); return; } @@ -391,15 +409,17 @@ unsigned long omap2_clksel_recalc(struct clk *clk) { unsigned long rate; u32 div = 0; + struct clk *parent; div = _read_divisor(clk); if (div == 0) - return clk->rate; + return __clk_get_rate(clk); - rate = clk->parent->rate / div; + parent = __clk_get_parent(clk); + rate = __clk_get_rate(parent) / div; - pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name, - rate, div); + pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", + __clk_get_name(clk), rate, div); return rate; } @@ -454,9 +474,10 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) _write_clksel_reg(clk, field_val); - clk->rate = clk->parent->rate / new_div; + clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div; - pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate); + pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(clk), + __clk_get_rate(clk)); return 0; } @@ -498,13 +519,15 @@ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent) clk_reparent(clk, new_parent); /* CLKSEL clocks follow their parents' rates, divided by a divisor */ - clk->rate = new_parent->rate; + clk->rate = __clk_get_rate(new_parent); if (parent_div > 0) - clk->rate /= parent_div; + __clk_get_rate(clk) /= parent_div; pr_debug("clock: %s: set parent to %s (new rate %ld)\n", - clk->name, clk->parent->name, clk->rate); + __clk_get_name(clk), + __clk_get_name(__clk_get_parent(clk)), + __clk_get_rate(clk)); return 0; } diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 0bf0ec3e352c..470828e6f293 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -87,7 +87,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n) dd = clk->dpll_data; /* DPLL divider must result in a valid jitter correction val */ - fint = clk->parent->rate / n; + fint = __clk_get_rate(__clk_get_parent(clk)) / n; if (cpu_is_omap24xx()) { /* Should not be called for OMAP2, so warn if it is called */ @@ -252,16 +252,16 @@ u32 omap2_get_dpll_rate(struct clk *clk) if (cpu_is_omap24xx()) { if (v == OMAP2XXX_EN_DPLL_LPBYPASS || v == OMAP2XXX_EN_DPLL_FRBYPASS) - return dd->clk_bypass->rate; + return __clk_get_rate(dd->clk_bypass); } else if (cpu_is_omap34xx()) { if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) - return dd->clk_bypass->rate; + return __clk_get_rate(dd->clk_bypass); } else if (soc_is_am33xx() || cpu_is_omap44xx()) { if (v == OMAP4XXX_EN_DPLL_LPBYPASS || v == OMAP4XXX_EN_DPLL_FRBYPASS || v == OMAP4XXX_EN_DPLL_MNBYPASS) - return dd->clk_bypass->rate; + return __clk_get_rate(dd->clk_bypass); } v = __raw_readl(dd->mult_div1_reg); @@ -270,7 +270,7 @@ u32 omap2_get_dpll_rate(struct clk *clk) dpll_div = v & dd->div1_mask; dpll_div >>= __ffs(dd->div1_mask); - dpll_clk = (long long)dd->clk_ref->rate * dpll_mult; + dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult; do_div(dpll_clk, dpll_div + 1); return dpll_clk; @@ -296,16 +296,20 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) unsigned long scaled_rt_rp; unsigned long new_rate = 0; struct dpll_data *dd; + unsigned long ref_rate; + const char *clk_name; if (!clk || !clk->dpll_data) return ~0; dd = clk->dpll_data; + ref_rate = __clk_get_rate(dd->clk_ref); + clk_name = __clk_get_name(clk); pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n", - clk->name, target_rate); + clk_name, target_rate); - scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR); + scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR); scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR; dd->last_rounded_rate = 0; @@ -332,14 +336,14 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) break; r = _dpll_test_mult(&m, n, &new_rate, target_rate, - dd->clk_ref->rate); + ref_rate); /* m can't be set low enough for this n - try with a larger n */ if (r == DPLL_MULT_UNDERFLOW) continue; pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n", - clk->name, m, n, new_rate); + clk_name, m, n, new_rate); if (target_rate == new_rate) { dd->last_rounded_m = m; @@ -350,8 +354,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) } if (target_rate != new_rate) { - pr_debug("clock: %s: cannot round to rate %ld\n", clk->name, - target_rate); + pr_debug("clock: %s: cannot round to rate %ld\n", + clk_name, target_rate); return ~0; } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 1a1f97f3ca69..fbcd82b8a7d0 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -78,7 +78,7 @@ static void _omap2_module_wait_ready(struct clk *clk) clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val, - clk->name); + __clk_get_name(clk)); } /* Public functions */ @@ -94,18 +94,21 @@ static void _omap2_module_wait_ready(struct clk *clk) void omap2_init_clk_clkdm(struct clk *clk) { struct clockdomain *clkdm; + const char *clk_name; if (!clk->clkdm_name) return; + clk_name = __clk_get_name(clk); + clkdm = clkdm_lookup(clk->clkdm_name); if (clkdm) { pr_debug("clock: associated clk %s to clkdm %s\n", - clk->name, clk->clkdm_name); + clk_name, clk->clkdm_name); clk->clkdm = clkdm; } else { - pr_debug("clock: could not associate clk %s to " - "clkdm %s\n", clk->name, clk->clkdm_name); + pr_debug("clock: could not associate clk %s to clkdm %s\n", + clk_name, clk->clkdm_name); } } diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index f48043dbac8a..02e74c1e62cf 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -63,8 +63,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) const struct dpll_data *dd; int i = 0; int ret = -EINVAL; + const char *clk_name; dd = clk->dpll_data; + clk_name = __clk_get_name(clk); state <<= __ffs(dd->idlest_mask); @@ -76,10 +78,10 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) if (i == MAX_DPLL_WAIT_TRIES) { printk(KERN_ERR "clock: %s failed transition to '%s'\n", - clk->name, (state) ? "locked" : "bypassed"); + clk_name, (state) ? "locked" : "bypassed"); } else { pr_debug("clock: %s transition to '%s' in %d loops\n", - clk->name, (state) ? "locked" : "bypassed", i); + clk_name, (state) ? "locked" : "bypassed", i); ret = 0; } @@ -93,7 +95,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) unsigned long fint; u16 f = 0; - fint = clk->dpll_data->clk_ref->rate / n; + fint = __clk_get_rate(clk->dpll_data->clk_ref) / n; pr_debug("clock: fint is %lu\n", fint); @@ -140,7 +142,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) u8 state = 1; int r = 0; - pr_debug("clock: locking DPLL %s\n", clk->name); + pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk)); dd = clk->dpll_data; state <<= __ffs(dd->idlest_mask); @@ -187,7 +189,7 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk) return -EINVAL; pr_debug("clock: configuring DPLL %s for low-power bypass\n", - clk->name); + __clk_get_name(clk)); ai = omap3_dpll_autoidle_read(clk); @@ -217,7 +219,7 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) return -EINVAL; - pr_debug("clock: stopping DPLL %s\n", clk->name); + pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk)); ai = omap3_dpll_autoidle_read(clk); @@ -245,7 +247,7 @@ static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n) { unsigned long fint, clkinp; /* watch out for overflow */ - clkinp = clk->parent->rate; + clkinp = __clk_get_rate(__clk_get_parent(clk)); fint = (clkinp / n) * m; if (fint < 1000000000) @@ -271,7 +273,7 @@ static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n) unsigned long clkinp, sd; /* watch out for overflow */ int mod1, mod2; - clkinp = clk->parent->rate; + clkinp = __clk_get_rate(__clk_get_parent(clk)); /* * target sigma-delta to near 250MHz @@ -380,16 +382,19 @@ int omap3_noncore_dpll_enable(struct clk *clk) { int r; struct dpll_data *dd; + struct clk *parent; dd = clk->dpll_data; if (!dd) return -EINVAL; - if (clk->rate == dd->clk_bypass->rate) { - WARN_ON(clk->parent != dd->clk_bypass); + parent = __clk_get_parent(clk); + + if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) { + WARN_ON(parent != dd->clk_bypass); r = _omap3_noncore_dpll_bypass(clk); } else { - WARN_ON(clk->parent != dd->clk_ref); + WARN_ON(parent != dd->clk_ref); r = _omap3_noncore_dpll_lock(clk); } /* @@ -432,7 +437,7 @@ void omap3_noncore_dpll_disable(struct clk *clk) int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) { struct clk *new_parent = NULL; - unsigned long hw_rate; + unsigned long hw_rate, bypass_rate; u16 freqsel = 0; struct dpll_data *dd; int ret; @@ -456,7 +461,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) omap2_clk_enable(dd->clk_bypass); omap2_clk_enable(dd->clk_ref); - if (dd->clk_bypass->rate == rate && + bypass_rate = __clk_get_rate(dd->clk_bypass); + if (bypass_rate == rate && (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); @@ -479,7 +485,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) } pr_debug("clock: %s: set rate: locking rate to %lu.\n", - clk->name, rate); + __clk_get_name(clk), rate); ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n, freqsel); @@ -557,7 +563,7 @@ void omap3_dpll_allow_idle(struct clk *clk) if (!dd->autoidle_reg) { pr_debug("clock: DPLL %s: autoidle not supported\n", - clk->name); + __clk_get_name(clk)); return; } @@ -591,7 +597,7 @@ void omap3_dpll_deny_idle(struct clk *clk) if (!dd->autoidle_reg) { pr_debug("clock: DPLL %s: autoidle not supported\n", - clk->name); + __clk_get_name(clk)); return; } @@ -617,11 +623,12 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk) unsigned long rate; u32 v; struct clk *pclk; + unsigned long parent_rate; /* Walk up the parents of clk, looking for a DPLL */ - pclk = clk->parent; + pclk = __clk_get_parent(clk); while (pclk && !pclk->dpll_data) - pclk = pclk->parent; + pclk = __clk_get_parent(pclk); /* clk does not have a DPLL as a parent? */ WARN_ON(!pclk); @@ -630,12 +637,13 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk) WARN_ON(!dd->enable_mask); + parent_rate = __clk_get_rate(__clk_get_parent(clk)); v = __raw_readl(dd->control_reg) & dd->enable_mask; v >>= __ffs(dd->enable_mask); if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE)) - rate = clk->parent->rate; + rate = parent_rate; else - rate = clk->parent->rate * 2; + rate = parent_rate * 2; return rate; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 428dca631e12..acff6b7b79a2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -697,7 +697,7 @@ static int _init_main_clk(struct omap_hwmod *oh) if (!oh->_clk->clkdm) pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n", - oh->main_clk, oh->_clk->name); + oh->name, oh->main_clk); return ret; } @@ -854,7 +854,7 @@ static void _enable_optional_clocks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) if (oc->_clk) { pr_debug("omap_hwmod: enable %s:%s\n", oc->role, - oc->_clk->name); + __clk_get_name(oc->_clk)); clk_enable(oc->_clk); } } @@ -869,7 +869,7 @@ static void _disable_optional_clocks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) if (oc->_clk) { pr_debug("omap_hwmod: disable %s:%s\n", oc->role, - oc->_clk->name); + __clk_get_name(oc->_clk)); clk_disable(oc->_clk); } } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 9cb5cede0f50..40012e3e3b89 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -188,7 +188,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - freq = clk->rate; + freq = clk_get_rate(clk); clk_put(clk); rcu_read_lock(); diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 656b9862279e..e2e2d045e428 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -19,6 +19,11 @@ struct module; struct clk; struct clockdomain; +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + /** * struct clkops - some clock function pointers * @enable: fn ptr that enables the current clock in hardware |