summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/Makefile13
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts9
-rw-r--r--arch/arm/boot/dts/imx6dl-hummingboard.dts10
-rw-r--r--arch/arm/boot/dts/imx6qdl-cubox-i.dtsi10
-rw-r--r--arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi58
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dts6
-rw-r--r--arch/arm/boot/dts/omap3-n9.dts2
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts4
-rw-r--r--arch/arm/boot/dts/omap3-n950.dts2
-rw-r--r--arch/arm/boot/dts/omap3-overo-alto35-common.dtsi77
-rw-r--r--arch/arm/boot/dts/omap3-overo-alto35.dts22
-rw-r--r--arch/arm/boot/dts/omap3-overo-base.dtsi221
-rw-r--r--arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi69
-rw-r--r--arch/arm/boot/dts/omap3-overo-chestnut43.dts38
-rw-r--r--arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi94
-rw-r--r--arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi57
-rw-r--r--arch/arm/boot/dts/omap3-overo-gallop43.dts38
-rw-r--r--arch/arm/boot/dts/omap3-overo-palo43-common.dtsi53
-rw-r--r--arch/arm/boot/dts/omap3-overo-palo43.dts38
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-alto35.dts21
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts38
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-gallop43.dts38
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-palo43.dts38
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-summit.dts30
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-tobi.dts22
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm.dtsi35
-rw-r--r--arch/arm/boot/dts/omap3-overo-summit-common.dtsi31
-rw-r--r--arch/arm/boot/dts/omap3-overo-summit.dts30
-rw-r--r--arch/arm/boot/dts/omap3-overo-tobi-common.dtsi41
-rw-r--r--arch/arm/boot/dts/omap3-overo-tobi.dts22
-rw-r--r--arch/arm/boot/dts/omap3-overo.dtsi99
-rw-r--r--arch/arm/boot/dts/omap3-tobi.dts83
-rw-r--r--arch/arm/boot/dts/tegra114.dtsi4
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi4
-rw-r--r--arch/arm/boot/dts/tegra30-cardhu.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi4
-rw-r--r--arch/arm/boot/dts/testcases/tests-interrupts.dtsi58
-rw-r--r--arch/arm/boot/dts/testcases/tests-phandle.dtsi39
-rw-r--r--arch/arm/boot/dts/testcases/tests.dtsi2
-rw-r--r--arch/arm/boot/dts/versatile-pb.dts4
-rw-r--r--arch/arm/include/asm/cacheflush.h1
-rw-r--r--arch/arm/include/asm/pgtable-3level.h15
-rw-r--r--arch/arm/include/asm/spinlock.h15
-rw-r--r--arch/arm/kernel/setup.c2
-rw-r--r--arch/arm/mach-imx/Makefile2
-rw-r--r--arch/arm/mach-imx/common.h4
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c1
-rw-r--r--arch/arm/mach-omap2/Kconfig8
-rw-r--r--arch/arm/mach-omap2/gpmc.c4
-rw-r--r--arch/arm/mach-omap2/io.c9
-rw-r--r--arch/arm/mach-pxa/mioa701.c9
-rw-r--r--arch/arm/mach-tegra/pm.c1
-rw-r--r--arch/arm/mach-tegra/tegra.c10
-rw-r--r--arch/arm/mm/dma-mapping.c2
-rw-r--r--arch/arm/mm/mm.h1
-rw-r--r--arch/arm/mm/mmu.c7
-rw-r--r--arch/arm/mm/proc-v6.S3
-rw-r--r--arch/arm/mm/proc-v7.S2
-rw-r--r--arch/avr32/Makefile2
-rw-r--r--arch/avr32/boards/mimc200/fram.c1
-rw-r--r--arch/avr32/include/asm/Kbuild1
-rw-r--r--arch/avr32/include/asm/io.h2
-rw-r--r--arch/powerpc/include/asm/eeh.h21
-rw-r--r--arch/powerpc/include/asm/hugetlb.h2
-rw-r--r--arch/powerpc/include/asm/pgtable-ppc64.h26
-rw-r--r--arch/powerpc/include/asm/pgtable.h22
-rw-r--r--arch/powerpc/include/asm/vdso.h6
-rw-r--r--arch/powerpc/kernel/eeh.c32
-rw-r--r--arch/powerpc/kernel/misc_32.S5
-rw-r--r--arch/powerpc/kernel/vdso32/vdso32_wrapper.S2
-rw-r--r--arch/powerpc/kernel/vdso64/vdso64_wrapper.S2
-rw-r--r--arch/powerpc/mm/pgtable_64.c12
-rw-r--r--arch/powerpc/mm/subpage-prot.c2
-rw-r--r--arch/powerpc/platforms/powernv/eeh-ioda.c32
-rw-r--r--arch/powerpc/platforms/powernv/eeh-powernv.c2
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pseries.c2
-rw-r--r--arch/powerpc/platforms/pseries/pci.c22
-rw-r--r--arch/sparc/Kconfig2
-rw-r--r--arch/sparc/mm/srmmu.c2
-rw-r--r--arch/x86/include/asm/tsc.h2
-rw-r--r--arch/x86/kernel/cpu/perf_event.c8
-rw-r--r--arch/x86/kernel/cpu/perf_event.h1
-rw-r--r--arch/x86/kernel/cpu/perf_event_intel.c11
-rw-r--r--arch/x86/kernel/cpu/perf_event_intel_uncore.c10
-rw-r--r--arch/x86/kernel/cpu/perf_event_p6.c48
-rw-r--r--arch/x86/kernel/pci-dma.c4
-rw-r--r--arch/x86/kernel/tsc.c7
-rw-r--r--arch/x86/kernel/tsc_msr.c30
88 files changed, 1436 insertions, 447 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 102bdc694286..abd9100482d3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -244,7 +244,18 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-n900.dtb \
omap3-n9.dtb \
omap3-n950.dtb \
- omap3-tobi.dtb \
+ omap3-overo-alto35.dtb \
+ omap3-overo-storm-alto35.dtb \
+ omap3-overo-chestnut43.dtb \
+ omap3-overo-storm-chestnut43.dtb \
+ omap3-overo-gallop43.dtb \
+ omap3-overo-storm-gallop43.dtb \
+ omap3-overo-palo43.dtb \
+ omap3-overo-storm-palo43.dtb \
+ omap3-overo-summit.dtb \
+ omap3-overo-storm-summit.dtb \
+ omap3-overo-tobi.dtb \
+ omap3-overo-storm-tobi.dtb \
omap3-gta04.dtb \
omap3-igep0020.dtb \
omap3-igep0030.dtb \
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index fd8bd3a254fe..ec08f6f677c3 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -268,6 +268,12 @@
>;
};
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
@@ -502,6 +508,9 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&sham {
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index fd8fc7cd53f3..5bfae54fb780 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -52,12 +52,6 @@
};
};
- codec: spdif-transmitter {
- compatible = "linux,spdif-dit";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hummingboard_spdif>;
- };
-
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
@@ -111,7 +105,7 @@
};
pinctrl_hummingboard_spdif: hummingboard-spdif {
- fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
@@ -142,6 +136,8 @@
};
&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_spdif>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 64daa3b311f6..c2a24888a276 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -46,12 +46,6 @@
};
};
- codec: spdif-transmitter {
- compatible = "linux,spdif-dit";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cubox_i_spdif>;
- };
-
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
@@ -89,7 +83,7 @@
};
pinctrl_cubox_i_spdif: cubox-i-spdif {
- fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
@@ -121,6 +115,8 @@
};
&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_spdif>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
new file mode 100644
index 000000000000..73e272fadc20
--- /dev/null
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Common file for GPMC connected smsc9221 on omaps
+ *
+ * Compared to smsc911x, smsc9221 (and others like smsc9217
+ * or smsc 9218) has faster timings, leading to higher
+ * bandwidth.
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+ vddvario: regulator-vddvario {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
+};
+
+&gpmc {
+ ethernet@gpmc {
+ compatible = "smsc,lan9221","smsc,lan9115";
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <42>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <42>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <36>;
+ gpmc,rd-cycle-ns = <60>;
+ gpmc,wr-cycle-ns = <54>;
+ gpmc,access-ns = <36>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <18>;
+ gpmc,wr-access-ns = <42>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index 3ad9fddf2eb6..7d760aa4ed15 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -32,7 +32,7 @@
aux-button {
label = "aux";
linux,code = <169>;
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
gpio-key,wakeup;
};
};
@@ -106,6 +106,8 @@
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
};
/* accelerometer */
@@ -179,8 +181,8 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
bus-width = <4>;
+ ti,non-removable;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index 39828ce464ee..9938b5dc1909 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -14,5 +14,5 @@
/ {
model = "Nokia N9";
- compatible = "nokia,omap3-n9", "ti,omap3";
+ compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 64aa416ee4c1..d1c3d99dc947 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 (or later) as
@@ -13,7 +13,7 @@
/ {
model = "Nokia N900";
- compatible = "nokia,omap3-n900", "ti,omap3";
+ compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
cpus {
cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index b076a526b999..261c5589bfa3 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -14,5 +14,5 @@
/ {
model = "Nokia N950";
- compatible = "nokia,omap3-n950", "ti,omap3";
+ compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
};
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
new file mode 100644
index 000000000000..19d64864a109
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ gpio148 {
+ label = "overo:red:gpio148";
+ gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>; /* gpio 148 */
+ };
+ gpio150 {
+ label = "overo:yellow:gpio150";
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio 150 */
+ };
+ gpio151 {
+ label = "overo:blue:gpio151";
+ gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* gpio 151 */
+ };
+ gpio170 {
+ label = "overo:green:gpio170";
+ gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* gpio 170 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ button0@10 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&omap3_pmx_core {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4) /* uart1_tx.gpio_148 */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4) /* uart1_rx.gpio_151 */
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4) /* sys_clkout1.gpio_10 */
+ >;
+ };
+};
+
+&usbhshost {
+ status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-alto35.dts b/arch/arm/boot/dts/omap3-overo-alto35.dts
new file mode 100644
index 000000000000..a3249eb7501d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-alto35.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Alto35";
+ compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
new file mode 100644
index 000000000000..d36bf0250a05
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+
+/ {
+ pwmleds {
+ compatible = "pwm-leds";
+
+ overo {
+ label = "overo:blue:COM";
+ pwms = <&twl_pwmled 1 7812500>;
+ max-brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "overo";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio6 8 0>; /* gpio_168: vbus enable */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */
+ vcc-supply = <&hsusb2_power>;
+ };
+
+ /* Regulator to trigger the nPoweron signal of the Wifi module */
+ w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-w3cbw003c-npoweron";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54: nPoweron */
+ enable-active-high;
+ };
+
+ /* Regulator to trigger the nReset signal of the Wifi module */
+ w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
+ pinctrl-names = "default";
+ pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-w3cbw003c-wifi-nreset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */
+ startup-delay-us = <10000>;
+ };
+
+ /* Regulator to trigger the nReset signal of the Bluetooth module */
+ w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-w3cbw003c-bt-nreset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164: BT nReset */
+ startup-delay-us = <10000>;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_pins
+ >;
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ /* WiFi/BT combo */
+ w3cbw003c_pins: pinmux_w3cbw003c_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
+ >;
+ };
+
+ hsusb2_pins: pinmux_hsusb2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4) /* i2c2_sda.gpio_183 */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+ status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&w3cbw003c_npoweron>;
+ vqmmc-supply = <&w3cbw003c_bt_nreset>;
+ vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ non-removable;
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
new file mode 100644
index 000000000000..19de6ff79686
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ gpio22 {
+ label = "overo:blue:gpio22";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0@23 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
+ gpio-key,wakeup;
+ };
+ button1@14 {
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
+ gpio-key,wakeup;
+ };
+ };
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
+
+ ethernet@gpmc {
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
+ };
+};
+
+&lis33de {
+ status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-chestnut43.dts
new file mode 100644
index 000000000000..fe0824aca3c0
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Chestnut43";
+ compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
new file mode 100644
index 000000000000..5831bcc52966
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
+ */
+
+/ {
+ lis33_3v3: lis33-3v3-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "lis33-3v3-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ lis33_1v8: lis33-1v8-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "lis33-1v8-reg";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&omap3_pmx_core {
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <100000>;
+
+ /* optional 1K EEPROM with revision information */
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ reg = <0x51>;
+ pagesize = <8>;
+ };
+
+ lis33de: lis33de@1d {
+ compatible = "st,lis33de", "st,lis3lv02d";
+ reg = <0x1d>;
+ Vdd-supply = <&lis33_1v8>;
+ Vdd_IO-supply = <&lis33_3v3>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <120>;
+ st,min-limit-y = <120>;
+ st,min-limit-z = <140>;
+ st,max-limit-x = <550>;
+ st,max-limit-y = <550>;
+ st,max-limit-z = <750>;
+ };
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
new file mode 100644
index 000000000000..5e848c26986b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ gpio22 {
+ label = "overo:blue:gpio22";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0@23 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
+ gpio-key,wakeup;
+ };
+ button1@14 {
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&usbhshost {
+ status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43.dts b/arch/arm/boot/dts/omap3-overo-gallop43.dts
new file mode 100644
index 000000000000..241f5c1914e0
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-gallop43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Gallop43";
+ compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
new file mode 100644
index 000000000000..abea232825b9
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ gpio22 {
+ label = "overo:blue:gpio22";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0@23 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
+ gpio-key,wakeup;
+ };
+ button1@14 {
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
+ gpio-key,wakeup;
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-palo43.dts b/arch/arm/boot/dts/omap3-overo-palo43.dts
new file mode 100644
index 000000000000..cedb103b4b66
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Palo43";
+ compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
new file mode 100644
index 000000000000..e9cae52afc25
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
+ compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
new file mode 100644
index 000000000000..7d82fdfd9909
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
+ compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
new file mode 100644
index 000000000000..a1b57e0cf37f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
+ compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
new file mode 100644
index 000000000000..b585d8fbc347
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
+ compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
new file mode 100644
index 000000000000..a0d7fd8369d7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
+ compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
new file mode 100644
index 000000000000..879383acad87
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm.dtsi b/arch/arm/boot/dts/omap3-overo-storm.dtsi
new file mode 100644
index 000000000000..6cb418b4124a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ >;
+
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
new file mode 100644
index 000000000000..999d1cd4a09f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&lis33de {
+ status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-summit.dts b/arch/arm/boot/dts/omap3-overo-summit.dts
new file mode 100644
index 000000000000..69765609455a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-summit.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Summit";
+ compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ >;
+ };
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
new file mode 100644
index 000000000000..13df50b39442
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
+
+ ethernet@gpmc {
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
+ };
+};
+
+&lis33de {
+ status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts
new file mode 100644
index 000000000000..fd6400efcdee
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobi.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index b08142f755fd..69ca7c45bca2 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -1,101 +1,38 @@
/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/*
- * The Gumstix Overo must be combined with an expansion board.
- */
-/dts-v1/;
-
#include "omap34xx.dtsi"
+#include "omap3-overo-base.dtsi"
-/ {
- pwmleds {
- compatible = "pwm-leds";
-
- overo {
- label = "overo:blue:COM";
- pwms = <&twl_pwmled 1 7812500>;
- max-brightness = <127>;
- linux,default-trigger = "mmc0";
- };
- };
-
- sound {
- compatible = "ti,omap-twl4030";
- ti,model = "overo";
-
- ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
- };
-};
-
-&i2c1 {
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ >;
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
- codec {
- };
- };
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
};
-};
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-/* i2c2 pins are used for gpio */
-&i2c2 {
- status = "disabled";
-};
-
-/* on board microSD slot */
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- bus-width = <4>;
-};
-
-/* optional on board WiFi */
-&mmc2 {
- bus-width = <4>;
-};
-
-&twl_gpio {
- ti,use-leds;
-};
-
-&usb_otg_hs {
- interface-type = <0>;
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- mode = <3>;
- power = <50>;
-};
-
-&omap3_pmx_core {
- uart3_pins: pinmux_uart3_pins {
+ w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
>;
};
};
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
-
&mcbsp2 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
deleted file mode 100644
index 7e4ad2aec37a..000000000000
--- a/arch/arm/boot/dts/omap3-tobi.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo.dtsi"
-
-/ {
- model = "TI OMAP3 Gumstix Overo on Tobi";
- compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
-
- leds {
- compatible = "gpio-leds";
- heartbeat {
- label = "overo:red:gpio21";
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- vddvario: regulator-vddvario {
- compatible = "regulator-fixed";
- regulator-name = "vddvario";
- regulator-always-on;
- };
-
- vdd33a: regulator-vdd33a {
- compatible = "regulator-fixed";
- regulator-name = "vdd33a";
- regulator-always-on;
- };
-};
-
-&gpmc {
- ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
-
- ethernet@5,0 {
- compatible = "smsc,lan9221", "smsc,lan9115";
- reg = <5 0 0xff>;
- bank-width = <2>;
-
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <42>;
- gpmc,cs-wr-off-ns = <36>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <12>;
- gpmc,adv-wr-off-ns = <12>;
- gpmc,oe-on-ns = <0>;
- gpmc,oe-off-ns = <42>;
- gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <36>;
- gpmc,rd-cycle-ns = <60>;
- gpmc,wr-cycle-ns = <54>;
- gpmc,access-ns = <36>;
- gpmc,page-burst-access-ns = <0>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <18>;
- gpmc,wr-access-ns = <42>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
-
- interrupt-parent = <&gpio6>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
- reg-io-width = <4>;
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-};
-
-&mmc3 {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 389e987ec281..44ec401ec366 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -57,6 +57,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -72,6 +74,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 480ecda3416b..48d2a7f4d0c0 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -94,6 +94,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -109,6 +111,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 9104224124ee..1e156d9d0506 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -28,7 +28,7 @@
compatible = "nvidia,cardhu", "nvidia,tegra30";
aliases {
- rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc0 = "/i2c@7000d000/tps65911@2d";
rtc1 = "/rtc@7000e000";
};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index ed8e7700b46d..19a84e933f4e 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -170,6 +170,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -185,6 +187,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
deleted file mode 100644
index c843720bd3e5..000000000000
--- a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-
-/ {
- testcase-data {
- interrupts {
- #address-cells = <1>;
- #size-cells = <1>;
- test_intc0: intc0 {
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- test_intc1: intc1 {
- interrupt-controller;
- #interrupt-cells = <3>;
- };
-
- test_intc2: intc2 {
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- test_intmap0: intmap0 {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- interrupt-map = <1 &test_intc0 9>,
- <2 &test_intc1 10 11 12>,
- <3 &test_intc2 13 14>,
- <4 &test_intc2 15 16>;
- };
-
- test_intmap1: intmap1 {
- #interrupt-cells = <2>;
- interrupt-map = <0x5000 1 2 &test_intc0 15>;
- };
-
- interrupts0 {
- interrupt-parent = <&test_intc0>;
- interrupts = <1>, <2>, <3>, <4>;
- };
-
- interrupts1 {
- interrupt-parent = <&test_intmap0>;
- interrupts = <1>, <2>, <3>, <4>;
- };
-
- interrupts-extended0 {
- reg = <0x5000 0x100>;
- interrupts-extended = <&test_intc0 1>,
- <&test_intc1 2 3 4>,
- <&test_intc2 5 6>,
- <&test_intmap0 1>,
- <&test_intmap0 2>,
- <&test_intmap0 3>,
- <&test_intmap1 1 2>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi
deleted file mode 100644
index 0007d3cd7dc2..000000000000
--- a/arch/arm/boot/dts/testcases/tests-phandle.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-
-/ {
- testcase-data {
- phandle-tests {
- provider0: provider0 {
- #phandle-cells = <0>;
- };
-
- provider1: provider1 {
- #phandle-cells = <1>;
- };
-
- provider2: provider2 {
- #phandle-cells = <2>;
- };
-
- provider3: provider3 {
- #phandle-cells = <3>;
- };
-
- consumer-a {
- phandle-list = <&provider1 1>,
- <&provider2 2 0>,
- <0>,
- <&provider3 4 4 3>,
- <&provider2 5 100>,
- <&provider0>,
- <&provider1 7>;
- phandle-list-names = "first", "second", "third";
-
- phandle-list-bad-phandle = <12345678 0 0>;
- phandle-list-bad-args = <&provider2 1 0>,
- <&provider3 0>;
- empty-property;
- unterminated-string = [40 41 42 43];
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi
deleted file mode 100644
index 3f123ecc9dd7..000000000000
--- a/arch/arm/boot/dts/testcases/tests.dtsi
+++ /dev/null
@@ -1,2 +0,0 @@
-/include/ "tests-phandle.dtsi"
-/include/ "tests-interrupts.dtsi"
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index f43907c40c93..65f657711323 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -1,4 +1,4 @@
-/include/ "versatile-ab.dts"
+#include <versatile-ab.dts>
/ {
model = "ARM Versatile PB";
@@ -47,4 +47,4 @@
};
};
-/include/ "testcases/tests.dtsi"
+#include <testcases.dtsi>
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index e9a49fe0284e..8b8b61685a34 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
static inline void __flush_icache_all(void)
{
__flush_icache_preferred();
+ dsb();
}
/*
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 03243f7eeddf..85c60adc8b60 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -120,13 +120,16 @@
/*
* 2nd stage PTE definitions for LPAE.
*/
-#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
-#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
+#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */
+#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */
+#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */
+#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */
+#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2)
-#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
+#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
+#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
+
+#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
/*
* Hyp-mode PL2 PTE definitions for LPAE.
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index ef3c6072aa45..ac4bfae26702 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -37,18 +37,9 @@
static inline void dsb_sev(void)
{
-#if __LINUX_ARM_ARCH__ >= 7
- __asm__ __volatile__ (
- "dsb ishst\n"
- SEV
- );
-#else
- __asm__ __volatile__ (
- "mcr p15, 0, %0, c7, c10, 4\n"
- SEV
- : : "r" (0)
- );
-#endif
+
+ dsb(ishst);
+ __asm__(SEV);
}
/*
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b0df9761de6d..1e8b030dbefd 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
kernel_data.end = virt_to_phys(_end - 1);
for_each_memblock(memory, region) {
- res = memblock_virt_alloc_low(sizeof(*res), 0);
+ res = memblock_virt_alloc(sizeof(*res), 0);
res->name = "System RAM";
res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index befcaf5d0574..ec419649320f 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -101,11 +101,9 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
-ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
# i.MX6SL reuses i.MX6Q code
obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
-endif
# i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 59c3b9b26bb4..baf439dc22d8 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -144,13 +144,11 @@ void imx6q_set_chicken_bit(void);
void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
-#ifdef CONFIG_PM
void imx6q_pm_init(void);
void imx6q_pm_set_ccm_base(void __iomem *base);
+#ifdef CONFIG_PM
void imx5_pm_init(void);
#else
-static inline void imx6q_pm_init(void) {}
-static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
static inline void imx5_pm_init(void) {}
#endif
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 91449c5cb70f..85089d821982 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 16,
.pins[0] = 6,
+ .extcon = "tahvo-usb",
};
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e2ce4f8366a7..0af7ca02314d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -50,6 +50,7 @@ config SOC_OMAP5
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
@@ -63,6 +64,7 @@ config SOC_AM33XX
bool "TI AM33XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
@@ -72,6 +74,7 @@ config SOC_AM43XX
depends on ARCH_MULTI_V7
select CPU_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select MULTI_IRQ_HANDLER
select ARM_GIC
select MACH_OMAP_GENERIC
@@ -80,6 +83,7 @@ config SOC_DRA7XX
bool "TI DRA7XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
@@ -268,9 +272,6 @@ config MACH_OMAP_3430SDP
default y
select OMAP_PACKAGE_CBB
-config MACH_NOKIA_N800
- bool
-
config MACH_NOKIA_N810
bool
@@ -281,7 +282,6 @@ config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
- select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
select OMAP_PACKAGE_ZAC
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index d24926e6340f..ab43755364f5 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
of_property_read_bool(np, "gpmc,time-para-granularity");
}
-#ifdef CONFIG_MTD_NAND
+#if IS_ENABLED(CONFIG_MTD_NAND)
static const char * const nand_xfer_types[] = {
[NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
@@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
}
#endif
-#ifdef CONFIG_MTD_ONENAND
+#if IS_ENABLED(CONFIG_MTD_ONENAND)
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
{
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index d408b15b4fbf..af432b191255 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
-#if defined(CONFIG_DEBUG_LL) && \
- (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
- {
- .virtual = ZOOM_UART_VIRT,
- .pfn = __phys_to_pfn(ZOOM_UART_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- },
-#endif
};
#endif
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index f70583fee59f..29997bde277d 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -38,6 +38,7 @@
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/reboot.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/max1586.h>
#include <linux/slab.h>
#include <linux/i2c/pxa-i2c.h>
@@ -714,6 +715,10 @@ static struct gpio global_gpios[] = {
{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
};
+static struct regulator_consumer_supply fixed_5v0_consumers[] = {
+ REGULATOR_SUPPLY("power", "pwm-backlight"),
+};
+
static void __init mioa701_machine_init(void)
{
int rc;
@@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void)
pxa_set_i2c_info(&i2c_pdata);
pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+
+ regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
+ ARRAY_SIZE(fixed_5v0_consumers),
+ 5000000);
}
static void mioa701_machine_exit(void)
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 4ae0286b468d..f55b05a29b55 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -24,6 +24,7 @@
#include <linux/cpu_pm.h>
#include <linux/suspend.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/clk/tegra.h>
#include <asm/smp_plat.h>
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 303a285d80fd..6191603379e1 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -73,10 +73,20 @@ u32 tegra_uart_config[3] = {
static void __init tegra_init_cache(void)
{
#ifdef CONFIG_CACHE_L2X0
+ static const struct of_device_id pl310_ids[] __initconst = {
+ { .compatible = "arm,pl310-cache", },
+ {}
+ };
+
+ struct device_node *np;
int ret;
void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
u32 aux_ctrl, cache_type;
+ np = of_find_matching_node(NULL, pl310_ids);
+ if (!np)
+ return;
+
cache_type = readl(p + L2X0_CACHE_TYPE);
aux_ctrl = (cache_type & 0x700) << (17-8);
aux_ctrl |= 0x7C400001;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 1a77450e728a..11b3914660d2 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1358,7 +1358,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
*handle = DMA_ERROR_CODE;
size = PAGE_ALIGN(size);
- if (gfp & GFP_ATOMIC)
+ if (!(gfp & __GFP_WAIT))
return __iommu_alloc_atomic(dev, size, handle);
/*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index d5a982d15a88..7ea641b7aa7d 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -38,6 +38,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
struct mem_type {
pteval_t prot_pte;
+ pteval_t prot_pte_s2;
pmdval_t prot_l1;
pmdval_t prot_sect;
unsigned int domain;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4f08c133cc25..a623cb3ad012 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -232,12 +232,16 @@ __setup("noalign", noalign_setup);
#endif /* ifdef CONFIG_CPU_CP15 / else */
#define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
+#define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE
#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE
static struct mem_type mem_types[] = {
[MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
L_PTE_SHARED,
+ .prot_pte_s2 = s2_policy(PROT_PTE_S2_DEVICE) |
+ s2_policy(L_PTE_S2_MT_DEV_SHARED) |
+ L_PTE_SHARED,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_S,
.domain = DOMAIN_IO,
@@ -508,7 +512,8 @@ static void __init build_mem_type_table(void)
cp = &cache_policies[cachepolicy];
vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
s2_pgprot = cp->pte_s2;
- hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte;
+ hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte;
+ s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2;
/*
* ARMv6 and above have extended page tables.
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 45dc29f85d56..32b3558321c4 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -208,7 +208,6 @@ __v6_setup:
mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r0, c2, c0, 2 @ TTB control register
@@ -218,6 +217,8 @@ __v6_setup:
ALT_UP(orr r8, r8, #TTB_FLAGS_UP)
mcr p15, 0, r8, c2, c0, 1 @ load TTB1
#endif /* CONFIG_MMU */
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and
+ @ complete invalidations
adr r5, v6_crval
ldmia r5, {r5, r6}
ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index bd1781979a39..74f6033e76dd 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -351,7 +351,6 @@ __v7_setup:
4: mov r10, #0
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
- dsb
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup
@@ -360,6 +359,7 @@ __v7_setup:
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
+ dsb @ Complete invalidations
#ifndef CONFIG_ARM_THUMBEE
mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE
and r0, r0, #(0xf << 12) @ ThumbEE enabled field
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 22fb66590dcd..dba48a5d5bb9 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -11,7 +11,7 @@ all: uImage vmlinux.elf
KBUILD_DEFCONFIG := atstk1002_defconfig
-KBUILD_CFLAGS += -pipe -fno-builtin -mno-pic
+KBUILD_CFLAGS += -pipe -fno-builtin -mno-pic -D__linux__
KBUILD_AFLAGS += -mrelax -mno-pic
KBUILD_CFLAGS_MODULE += -mno-relax
LDFLAGS_vmlinux += --relax
diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
index 9764a1a1073e..c1466a872b9c 100644
--- a/arch/avr32/boards/mimc200/fram.c
+++ b/arch/avr32/boards/mimc200/fram.c
@@ -11,6 +11,7 @@
#define FRAM_VERSION "1.0"
#include <linux/miscdevice.h>
+#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/mm.h>
#include <linux/io.h>
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index cfb9fe1b8df9..c7c64a63c29f 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -17,5 +17,6 @@ generic-y += scatterlist.h
generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
+generic-y += vga.h
generic-y += xor.h
generic-y += hash.h
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
index fc6483f83ccc..4f5ec2bb7172 100644
--- a/arch/avr32/include/asm/io.h
+++ b/arch/avr32/include/asm/io.h
@@ -295,6 +295,8 @@ extern void __iounmap(void __iomem *addr);
#define iounmap(addr) \
__iounmap(addr)
+#define ioremap_wc ioremap_nocache
+
#define cached(addr) P1SEGADDR(addr)
#define uncached(addr) P2SEGADDR(addr)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 9e39ceb1d19f..d4dd41fb951b 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -172,10 +172,20 @@ struct eeh_ops {
};
extern struct eeh_ops *eeh_ops;
-extern int eeh_subsystem_enabled;
+extern bool eeh_subsystem_enabled;
extern raw_spinlock_t confirm_error_lock;
extern int eeh_probe_mode;
+static inline bool eeh_enabled(void)
+{
+ return eeh_subsystem_enabled;
+}
+
+static inline void eeh_set_enable(bool mode)
+{
+ eeh_subsystem_enabled = mode;
+}
+
#define EEH_PROBE_MODE_DEV (1<<0) /* From PCI device */
#define EEH_PROBE_MODE_DEVTREE (1<<1) /* From device tree */
@@ -246,7 +256,7 @@ void eeh_remove_device(struct pci_dev *);
* If this macro yields TRUE, the caller relays to eeh_check_failure()
* which does further tests out of line.
*/
-#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled)
+#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_enabled())
/*
* Reads from a device which has been isolated by EEH will return
@@ -257,6 +267,13 @@ void eeh_remove_device(struct pci_dev *);
#else /* !CONFIG_EEH */
+static inline bool eeh_enabled(void)
+{
+ return false;
+}
+
+static inline void eeh_set_enable(bool mode) { }
+
static inline int eeh_init(void)
{
return 0;
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index d750336b171d..623f2971ce0e 100644
--- a/arch/powerpc/include/asm/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -127,7 +127,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
#ifdef CONFIG_PPC64
- return __pte(pte_update(mm, addr, ptep, ~0UL, 1));
+ return __pte(pte_update(mm, addr, ptep, ~0UL, 0, 1));
#else
return __pte(pte_update(ptep, ~0UL, 0));
#endif
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index bc141c950b1e..eb9261024f51 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -195,6 +195,7 @@ extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
static inline unsigned long pte_update(struct mm_struct *mm,
unsigned long addr,
pte_t *ptep, unsigned long clr,
+ unsigned long set,
int huge)
{
#ifdef PTE_ATOMIC_UPDATES
@@ -205,14 +206,15 @@ static inline unsigned long pte_update(struct mm_struct *mm,
andi. %1,%0,%6\n\
bne- 1b \n\
andc %1,%0,%4 \n\
+ or %1,%1,%7\n\
stdcx. %1,0,%3 \n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
- : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
+ : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY), "r" (set)
: "cc" );
#else
unsigned long old = pte_val(*ptep);
- *ptep = __pte(old & ~clr);
+ *ptep = __pte((old & ~clr) | set);
#endif
/* huge pages use the old page table lock */
if (!huge)
@@ -231,9 +233,9 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
{
unsigned long old;
- if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+ if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
return 0;
- old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
+ old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0);
return (old & _PAGE_ACCESSED) != 0;
}
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
@@ -252,7 +254,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
if ((pte_val(*ptep) & _PAGE_RW) == 0)
return;
- pte_update(mm, addr, ptep, _PAGE_RW, 0);
+ pte_update(mm, addr, ptep, _PAGE_RW, 0, 0);
}
static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
@@ -261,7 +263,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
if ((pte_val(*ptep) & _PAGE_RW) == 0)
return;
- pte_update(mm, addr, ptep, _PAGE_RW, 1);
+ pte_update(mm, addr, ptep, _PAGE_RW, 0, 1);
}
/*
@@ -284,14 +286,14 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
- unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
+ unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0);
return __pte(old);
}
static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
pte_t * ptep)
{
- pte_update(mm, addr, ptep, ~0UL, 0);
+ pte_update(mm, addr, ptep, ~0UL, 0, 0);
}
@@ -506,7 +508,9 @@ extern int pmdp_set_access_flags(struct vm_area_struct *vma,
extern unsigned long pmd_hugepage_update(struct mm_struct *mm,
unsigned long addr,
- pmd_t *pmdp, unsigned long clr);
+ pmd_t *pmdp,
+ unsigned long clr,
+ unsigned long set);
static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
unsigned long addr, pmd_t *pmdp)
@@ -515,7 +519,7 @@ static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
return 0;
- old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED);
+ old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0);
return ((old & _PAGE_ACCESSED) != 0);
}
@@ -542,7 +546,7 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr,
if ((pmd_val(*pmdp) & _PAGE_RW) == 0)
return;
- pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW);
+ pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0);
}
#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index f83b6f3e1b39..3ebb188c3ff5 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -75,12 +75,34 @@ static inline pte_t pte_mknuma(pte_t pte)
return pte;
}
+#define ptep_set_numa ptep_set_numa
+static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ if ((pte_val(*ptep) & _PAGE_PRESENT) == 0)
+ VM_BUG_ON(1);
+
+ pte_update(mm, addr, ptep, _PAGE_PRESENT, _PAGE_NUMA, 0);
+ return;
+}
+
#define pmd_numa pmd_numa
static inline int pmd_numa(pmd_t pmd)
{
return pte_numa(pmd_pte(pmd));
}
+#define pmdp_set_numa pmdp_set_numa
+static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
+ pmd_t *pmdp)
+{
+ if ((pmd_val(*pmdp) & _PAGE_PRESENT) == 0)
+ VM_BUG_ON(1);
+
+ pmd_hugepage_update(mm, addr, pmdp, _PAGE_PRESENT, _PAGE_NUMA);
+ return;
+}
+
#define pmd_mknonnuma pmd_mknonnuma
static inline pmd_t pmd_mknonnuma(pmd_t pmd)
{
diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
index 0d9cecddf8a4..c53f5f6d1761 100644
--- a/arch/powerpc/include/asm/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
@@ -4,11 +4,11 @@
#ifdef __KERNEL__
/* Default link addresses for the vDSOs */
-#define VDSO32_LBASE 0x100000
-#define VDSO64_LBASE 0x100000
+#define VDSO32_LBASE 0x0
+#define VDSO64_LBASE 0x0
/* Default map addresses for 32bit vDSO */
-#define VDSO32_MBASE VDSO32_LBASE
+#define VDSO32_MBASE 0x100000
#define VDSO_VERSION_STRING LINUX_2.6.15
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 148db72a8c43..e7b76a6bf150 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -28,6 +28,7 @@
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/rbtree.h>
+#include <linux/reboot.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/export.h>
@@ -89,7 +90,7 @@
/* Platform dependent EEH operations */
struct eeh_ops *eeh_ops = NULL;
-int eeh_subsystem_enabled;
+bool eeh_subsystem_enabled = false;
EXPORT_SYMBOL(eeh_subsystem_enabled);
/*
@@ -364,7 +365,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
eeh_stats.total_mmio_ffs++;
- if (!eeh_subsystem_enabled)
+ if (!eeh_enabled())
return 0;
if (!edev) {
@@ -747,6 +748,17 @@ int __exit eeh_ops_unregister(const char *name)
return -EEXIST;
}
+static int eeh_reboot_notifier(struct notifier_block *nb,
+ unsigned long action, void *unused)
+{
+ eeh_set_enable(false);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block eeh_reboot_nb = {
+ .notifier_call = eeh_reboot_notifier,
+};
+
/**
* eeh_init - EEH initialization
*
@@ -778,6 +790,14 @@ int eeh_init(void)
if (machine_is(powernv) && cnt++ <= 0)
return ret;
+ /* Register reboot notifier */
+ ret = register_reboot_notifier(&eeh_reboot_nb);
+ if (ret) {
+ pr_warn("%s: Failed to register notifier (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
/* call platform initialization function */
if (!eeh_ops) {
pr_warning("%s: Platform EEH operation not found\n",
@@ -822,7 +842,7 @@ int eeh_init(void)
return ret;
}
- if (eeh_subsystem_enabled)
+ if (eeh_enabled())
pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
else
pr_warning("EEH: No capable adapters found\n");
@@ -897,7 +917,7 @@ void eeh_add_device_late(struct pci_dev *dev)
struct device_node *dn;
struct eeh_dev *edev;
- if (!dev || !eeh_subsystem_enabled)
+ if (!dev || !eeh_enabled())
return;
pr_debug("EEH: Adding device %s\n", pci_name(dev));
@@ -1005,7 +1025,7 @@ void eeh_remove_device(struct pci_dev *dev)
{
struct eeh_dev *edev;
- if (!dev || !eeh_subsystem_enabled)
+ if (!dev || !eeh_enabled())
return;
edev = pci_dev_to_eeh_dev(dev);
@@ -1045,7 +1065,7 @@ void eeh_remove_device(struct pci_dev *dev)
static int proc_eeh_show(struct seq_file *m, void *v)
{
- if (0 == eeh_subsystem_enabled) {
+ if (!eeh_enabled()) {
seq_printf(m, "EEH Subsystem is globally disabled\n");
seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs);
} else {
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 879f09620f83..7c6bb4b17b49 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -57,11 +57,14 @@ _GLOBAL(call_do_softirq)
mtlr r0
blr
+/*
+ * void call_do_irq(struct pt_regs *regs, struct thread_info *irqtp);
+ */
_GLOBAL(call_do_irq)
mflr r0
stw r0,4(r1)
lwz r10,THREAD+KSP_LIMIT(r2)
- addi r11,r3,THREAD_INFO_GAP
+ addi r11,r4,THREAD_INFO_GAP
stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
mr r1,r4
stw r10,8(r1)
diff --git a/arch/powerpc/kernel/vdso32/vdso32_wrapper.S b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S
index 79683d0393f5..6ac107ac402a 100644
--- a/arch/powerpc/kernel/vdso32/vdso32_wrapper.S
+++ b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S
@@ -6,7 +6,7 @@
.globl vdso32_start, vdso32_end
.balign PAGE_SIZE
vdso32_start:
- .incbin "arch/powerpc/kernel/vdso32/vdso32.so"
+ .incbin "arch/powerpc/kernel/vdso32/vdso32.so.dbg"
.balign PAGE_SIZE
vdso32_end:
diff --git a/arch/powerpc/kernel/vdso64/vdso64_wrapper.S b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S
index 8df9e2463007..df60fca6a13d 100644
--- a/arch/powerpc/kernel/vdso64/vdso64_wrapper.S
+++ b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S
@@ -6,7 +6,7 @@
.globl vdso64_start, vdso64_end
.balign PAGE_SIZE
vdso64_start:
- .incbin "arch/powerpc/kernel/vdso64/vdso64.so"
+ .incbin "arch/powerpc/kernel/vdso64/vdso64.so.dbg"
.balign PAGE_SIZE
vdso64_end:
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 65b7b65e8708..62bf5e8e78da 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -510,7 +510,8 @@ int pmdp_set_access_flags(struct vm_area_struct *vma, unsigned long address,
}
unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr,
- pmd_t *pmdp, unsigned long clr)
+ pmd_t *pmdp, unsigned long clr,
+ unsigned long set)
{
unsigned long old, tmp;
@@ -526,14 +527,15 @@ unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr,
andi. %1,%0,%6\n\
bne- 1b \n\
andc %1,%0,%4 \n\
+ or %1,%1,%7\n\
stdcx. %1,0,%3 \n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*pmdp)
- : "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY)
+ : "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY), "r" (set)
: "cc" );
#else
old = pmd_val(*pmdp);
- *pmdp = __pmd(old & ~clr);
+ *pmdp = __pmd((old & ~clr) | set);
#endif
if (old & _PAGE_HASHPTE)
hpte_do_hugepage_flush(mm, addr, pmdp);
@@ -708,7 +710,7 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp)
{
- pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT);
+ pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, 0);
}
/*
@@ -835,7 +837,7 @@ pmd_t pmdp_get_and_clear(struct mm_struct *mm,
unsigned long old;
pgtable_t *pgtable_slot;
- old = pmd_hugepage_update(mm, addr, pmdp, ~0UL);
+ old = pmd_hugepage_update(mm, addr, pmdp, ~0UL, 0);
old_pmd = __pmd(old);
/*
* We have pmd == none and we are holding page_table_lock.
diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index a770df2dae70..6c0b1f5f8d2c 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -78,7 +78,7 @@ static void hpte_flush_range(struct mm_struct *mm, unsigned long addr,
pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
arch_enter_lazy_mmu_mode();
for (; npages > 0; --npages) {
- pte_update(mm, addr, pte, 0, 0);
+ pte_update(mm, addr, pte, 0, 0, 0);
addr += PAGE_SIZE;
++pte;
}
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index e1e71618b70c..f51474336460 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -44,7 +44,8 @@ static int ioda_eeh_event(struct notifier_block *nb,
/* We simply send special EEH event */
if ((changed_evts & OPAL_EVENT_PCI_ERROR) &&
- (events & OPAL_EVENT_PCI_ERROR))
+ (events & OPAL_EVENT_PCI_ERROR) &&
+ eeh_enabled())
eeh_send_failure_event(NULL);
return 0;
@@ -489,8 +490,7 @@ static int ioda_eeh_bridge_reset(struct pci_controller *hose,
static int ioda_eeh_reset(struct eeh_pe *pe, int option)
{
struct pci_controller *hose = pe->phb;
- struct eeh_dev *edev;
- struct pci_dev *dev;
+ struct pci_bus *bus;
int ret;
/*
@@ -519,31 +519,11 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
if (pe->type & EEH_PE_PHB) {
ret = ioda_eeh_phb_reset(hose, option);
} else {
- if (pe->type & EEH_PE_DEVICE) {
- /*
- * If it's device PE, we didn't refer to the parent
- * PCI bus yet. So we have to figure it out indirectly.
- */
- edev = list_first_entry(&pe->edevs,
- struct eeh_dev, list);
- dev = eeh_dev_to_pci_dev(edev);
- dev = dev->bus->self;
- } else {
- /*
- * If it's bus PE, the parent PCI bus is already there
- * and just pick it up.
- */
- dev = pe->bus->self;
- }
-
- /*
- * Do reset based on the fact that the direct upstream bridge
- * is root bridge (port) or not.
- */
- if (dev->bus->number == 0)
+ bus = eeh_pe_bus_get(pe);
+ if (pci_is_root_bus(bus))
ret = ioda_eeh_root_reset(hose, option);
else
- ret = ioda_eeh_bridge_reset(hose, dev, option);
+ ret = ioda_eeh_bridge_reset(hose, bus->self, option);
}
return ret;
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index a79fddc5e74e..a59788e83b8b 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -145,7 +145,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
* Enable EEH explicitly so that we will do EEH check
* while accessing I/O stuff
*/
- eeh_subsystem_enabled = 1;
+ eeh_set_enable(true);
/* Save memory bars */
eeh_save_bars(edev);
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 9ef3cc8ebc11..8a8f0472d98f 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -265,7 +265,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
enable = 1;
if (enable) {
- eeh_subsystem_enabled = 1;
+ eeh_set_enable(true);
eeh_add_to_parent_pe(edev);
pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 70670a2d9cf2..c413ec158ff5 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -113,7 +113,8 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge)
{
struct device_node *dn, *pdn;
struct pci_bus *bus;
- const __be32 *pcie_link_speed_stats;
+ u32 pcie_link_speed_stats[2];
+ int rc;
bus = bridge->bus;
@@ -122,38 +123,45 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge)
return 0;
for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) {
- pcie_link_speed_stats = of_get_property(pdn,
- "ibm,pcie-link-speed-stats", NULL);
- if (pcie_link_speed_stats)
+ rc = of_property_read_u32_array(pdn,
+ "ibm,pcie-link-speed-stats",
+ &pcie_link_speed_stats[0], 2);
+ if (!rc)
break;
}
of_node_put(pdn);
- if (!pcie_link_speed_stats) {
+ if (rc) {
pr_err("no ibm,pcie-link-speed-stats property\n");
return 0;
}
- switch (be32_to_cpup(pcie_link_speed_stats)) {
+ switch (pcie_link_speed_stats[0]) {
case 0x01:
bus->max_bus_speed = PCIE_SPEED_2_5GT;
break;
case 0x02:
bus->max_bus_speed = PCIE_SPEED_5_0GT;
break;
+ case 0x04:
+ bus->max_bus_speed = PCIE_SPEED_8_0GT;
+ break;
default:
bus->max_bus_speed = PCI_SPEED_UNKNOWN;
break;
}
- switch (be32_to_cpup(pcie_link_speed_stats)) {
+ switch (pcie_link_speed_stats[1]) {
case 0x01:
bus->cur_bus_speed = PCIE_SPEED_2_5GT;
break;
case 0x02:
bus->cur_bus_speed = PCIE_SPEED_5_0GT;
break;
+ case 0x04:
+ bus->cur_bus_speed = PCIE_SPEED_8_0GT;
+ break;
default:
bus->cur_bus_speed = PCI_SPEED_UNKNOWN;
break;
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index c51efdcd07a2..7d8b7e94b93b 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -27,7 +27,7 @@ config SPARC
select RTC_DRV_M48T59
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
- select HAVE_ARCH_JUMP_LABEL
+ select HAVE_ARCH_JUMP_LABEL if SPARC64
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_PCI_IOMAP
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 869023abe5a4..cfbe53c17b0d 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -14,6 +14,7 @@
#include <linux/pagemap.h>
#include <linux/vmalloc.h>
#include <linux/kdebug.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/log2.h>
@@ -62,6 +63,7 @@ extern unsigned long last_valid_pfn;
static pgd_t *srmmu_swapper_pg_dir;
const struct sparc32_cachetlb_ops *sparc32_cachetlb_ops;
+EXPORT_SYMBOL(sparc32_cachetlb_ops);
#ifdef CONFIG_SMP
const struct sparc32_cachetlb_ops *local_ops;
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 57ae63cd6ee2..94605c0e9cee 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -66,6 +66,6 @@ extern void tsc_save_sched_clock_state(void);
extern void tsc_restore_sched_clock_state(void);
/* MSR based TSC calibration for Intel Atom SoC platforms */
-int try_msr_calibrate_tsc(unsigned long *fast_calibrate);
+unsigned long try_msr_calibrate_tsc(void);
#endif /* _ASM_X86_TSC_H */
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index b88645191fe5..895604f2e916 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1521,6 +1521,8 @@ static int __init init_hw_perf_events(void)
pr_cont("%s PMU driver.\n", x86_pmu.name);
+ x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */
+
for (quirk = x86_pmu.quirks; quirk; quirk = quirk->next)
quirk->func();
@@ -1534,7 +1536,6 @@ static int __init init_hw_perf_events(void)
__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1,
0, x86_pmu.num_counters, 0, 0);
- x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */
x86_pmu_format_group.attrs = x86_pmu.format_attrs;
if (x86_pmu.event_attrs)
@@ -1820,9 +1821,12 @@ static ssize_t set_attr_rdpmc(struct device *cdev,
if (ret)
return ret;
+ if (x86_pmu.attr_rdpmc_broken)
+ return -ENOTSUPP;
+
if (!!val != !!x86_pmu.attr_rdpmc) {
x86_pmu.attr_rdpmc = !!val;
- smp_call_function(change_rdpmc, (void *)val, 1);
+ on_each_cpu(change_rdpmc, (void *)val, 1);
}
return count;
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index c1a861829d81..4972c244d0bc 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -409,6 +409,7 @@ struct x86_pmu {
/*
* sysfs attrs
*/
+ int attr_rdpmc_broken;
int attr_rdpmc;
struct attribute **format_attrs;
struct attribute **event_attrs;
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 0fa4f242f050..aa333d966886 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1361,10 +1361,8 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
intel_pmu_disable_all();
handled = intel_pmu_drain_bts_buffer();
status = intel_pmu_get_status();
- if (!status) {
- intel_pmu_enable_all(0);
- return handled;
- }
+ if (!status)
+ goto done;
loops = 0;
again:
@@ -2310,10 +2308,7 @@ __init int intel_pmu_init(void)
if (version > 1)
x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3);
- /*
- * v2 and above have a perf capabilities MSR
- */
- if (version > 1) {
+ if (boot_cpu_has(X86_FEATURE_PDCM)) {
u64 capabilities;
rdmsrl(MSR_IA32_PERF_CAPABILITIES, capabilities);
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
index 29c248799ced..c88f7f4b03ee 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
@@ -501,8 +501,11 @@ static struct extra_reg snbep_uncore_cbox_extra_regs[] = {
SNBEP_CBO_EVENT_EXTRA_REG(SNBEP_CBO_PMON_CTL_TID_EN,
SNBEP_CBO_PMON_CTL_TID_EN, 0x1),
SNBEP_CBO_EVENT_EXTRA_REG(0x0334, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x4334, 0xffff, 0x6),
SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x4534, 0xffff, 0x6),
SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x4934, 0xffff, 0x6),
SNBEP_CBO_EVENT_EXTRA_REG(0x4134, 0xffff, 0x6),
SNBEP_CBO_EVENT_EXTRA_REG(0x0135, 0xffff, 0x8),
SNBEP_CBO_EVENT_EXTRA_REG(0x0335, 0xffff, 0x8),
@@ -1178,10 +1181,15 @@ static struct extra_reg ivt_uncore_cbox_extra_regs[] = {
SNBEP_CBO_EVENT_EXTRA_REG(SNBEP_CBO_PMON_CTL_TID_EN,
SNBEP_CBO_PMON_CTL_TID_EN, 0x1),
SNBEP_CBO_EVENT_EXTRA_REG(0x1031, 0x10ff, 0x2),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x1134, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x4134, 0xffff, 0xc),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x5134, 0xffff, 0xc),
SNBEP_CBO_EVENT_EXTRA_REG(0x0334, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x4334, 0xffff, 0xc),
SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x4534, 0xffff, 0xc),
SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4),
- SNBEP_CBO_EVENT_EXTRA_REG(0x4134, 0xffff, 0xc),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x4934, 0xffff, 0xc),
SNBEP_CBO_EVENT_EXTRA_REG(0x0135, 0xffff, 0x10),
SNBEP_CBO_EVENT_EXTRA_REG(0x0335, 0xffff, 0x10),
SNBEP_CBO_EVENT_EXTRA_REG(0x2135, 0xffff, 0x10),
diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c
index b1e2fe115323..7c1a0c07b607 100644
--- a/arch/x86/kernel/cpu/perf_event_p6.c
+++ b/arch/x86/kernel/cpu/perf_event_p6.c
@@ -231,31 +231,49 @@ static __initconst const struct x86_pmu p6_pmu = {
};
+static __init void p6_pmu_rdpmc_quirk(void)
+{
+ if (boot_cpu_data.x86_mask < 9) {
+ /*
+ * PPro erratum 26; fixed in stepping 9 and above.
+ */
+ pr_warn("Userspace RDPMC support disabled due to a CPU erratum\n");
+ x86_pmu.attr_rdpmc_broken = 1;
+ x86_pmu.attr_rdpmc = 0;
+ }
+}
+
__init int p6_pmu_init(void)
{
+ x86_pmu = p6_pmu;
+
switch (boot_cpu_data.x86_model) {
- case 1:
- case 3: /* Pentium Pro */
- case 5:
- case 6: /* Pentium II */
- case 7:
- case 8:
- case 11: /* Pentium III */
- case 9:
- case 13:
- /* Pentium M */
+ case 1: /* Pentium Pro */
+ x86_add_quirk(p6_pmu_rdpmc_quirk);
+ break;
+
+ case 3: /* Pentium II - Klamath */
+ case 5: /* Pentium II - Deschutes */
+ case 6: /* Pentium II - Mendocino */
break;
+
+ case 7: /* Pentium III - Katmai */
+ case 8: /* Pentium III - Coppermine */
+ case 10: /* Pentium III Xeon */
+ case 11: /* Pentium III - Tualatin */
+ break;
+
+ case 9: /* Pentium M - Banias */
+ case 13: /* Pentium M - Dothan */
+ break;
+
default:
- pr_cont("unsupported p6 CPU model %d ",
- boot_cpu_data.x86_model);
+ pr_cont("unsupported p6 CPU model %d ", boot_cpu_data.x86_model);
return -ENODEV;
}
- x86_pmu = p6_pmu;
-
memcpy(hw_cache_event_ids, p6_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
-
return 0;
}
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 872079a67e4d..f7d0672481fd 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -100,8 +100,10 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
flag |= __GFP_ZERO;
again:
page = NULL;
- if (!(flag & GFP_ATOMIC))
+ /* CMA can be used only in the context which permits sleeping */
+ if (flag & __GFP_WAIT)
page = dma_alloc_from_contiguous(dev, count, get_order(size));
+ /* fallback */
if (!page)
page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
if (!page)
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index acb3b606613e..cfbe99f88830 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -653,13 +653,10 @@ unsigned long native_calibrate_tsc(void)
/* Calibrate TSC using MSR for Intel Atom SoCs */
local_irq_save(flags);
- i = try_msr_calibrate_tsc(&fast_calibrate);
+ fast_calibrate = try_msr_calibrate_tsc();
local_irq_restore(flags);
- if (i >= 0) {
- if (i == 0)
- pr_warn("Fast TSC calibration using MSR failed\n");
+ if (fast_calibrate)
return fast_calibrate;
- }
local_irq_save(flags);
fast_calibrate = quick_pit_calibrate();
diff --git a/arch/x86/kernel/tsc_msr.c b/arch/x86/kernel/tsc_msr.c
index 8b5434f4389f..92ae6acac8a7 100644
--- a/arch/x86/kernel/tsc_msr.c
+++ b/arch/x86/kernel/tsc_msr.c
@@ -53,7 +53,7 @@ static struct freq_desc freq_desc_tables[] = {
/* TNG */
{ 6, 0x4a, 1, { 0, FREQ_100, FREQ_133, 0, 0, 0, 0, 0 } },
/* VLV2 */
- { 6, 0x37, 1, { 0, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } },
+ { 6, 0x37, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } },
/* ANN */
{ 6, 0x5a, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_100, 0, 0, 0, 0 } },
};
@@ -77,21 +77,18 @@ static int match_cpu(u8 family, u8 model)
/*
* Do MSR calibration only for known/supported CPUs.
- * Return values:
- * -1: CPU is unknown/unsupported for MSR based calibration
- * 0: CPU is known/supported, but calibration failed
- * 1: CPU is known/supported, and calibration succeeded
+ *
+ * Returns the calibration value or 0 if MSR calibration failed.
*/
-int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
+unsigned long try_msr_calibrate_tsc(void)
{
- int cpu_index;
u32 lo, hi, ratio, freq_id, freq;
+ unsigned long res;
+ int cpu_index;
cpu_index = match_cpu(boot_cpu_data.x86, boot_cpu_data.x86_model);
if (cpu_index < 0)
- return -1;
-
- *fast_calibrate = 0;
+ return 0;
if (freq_desc_tables[cpu_index].msr_plat) {
rdmsr(MSR_PLATFORM_INFO, lo, hi);
@@ -103,7 +100,7 @@ int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
pr_info("Maximum core-clock to bus-clock ratio: 0x%x\n", ratio);
if (!ratio)
- return 0;
+ goto fail;
/* Get FSB FREQ ID */
rdmsr(MSR_FSB_FREQ, lo, hi);
@@ -112,16 +109,19 @@ int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
pr_info("Resolved frequency ID: %u, frequency: %u KHz\n",
freq_id, freq);
if (!freq)
- return 0;
+ goto fail;
/* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
- *fast_calibrate = freq * ratio;
- pr_info("TSC runs at %lu KHz\n", *fast_calibrate);
+ res = freq * ratio;
+ pr_info("TSC runs at %lu KHz\n", res);
#ifdef CONFIG_X86_LOCAL_APIC
lapic_timer_frequency = (freq * 1000) / HZ;
pr_info("lapic_timer_frequency = %d\n", lapic_timer_frequency);
#endif
+ return res;
- return 1;
+fail:
+ pr_warn("Fast TSC calibration using MSR failed\n");
+ return 0;
}
OpenPOWER on IntegriCloud