diff options
Diffstat (limited to 'arch')
602 files changed, 34021 insertions, 16310 deletions
diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index 25da0017ec87..21b1117a0c61 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -1,8 +1,6 @@ #ifndef _ALPHA_FCNTL_H #define _ALPHA_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ #define O_CREAT 01000 /* not fcntl */ #define O_TRUNC 02000 /* not fcntl */ #define O_EXCL 04000 /* not fcntl */ @@ -10,13 +8,28 @@ #define O_NONBLOCK 00004 #define O_APPEND 00010 -#define O_SYNC 040000 +#define O_DSYNC 040000 /* used to be O_SYNC, see below */ #define O_DIRECTORY 0100000 /* must be a directory */ #define O_NOFOLLOW 0200000 /* don't follow links */ #define O_LARGEFILE 0400000 /* will be set by the kernel on every open */ #define O_DIRECT 02000000 /* direct disk access - should check with OSF/1 */ #define O_NOATIME 04000000 #define O_CLOEXEC 010000000 /* set close_on_exec */ +/* + * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * the O_SYNC flag. We continue to use the existing numerical value + * for O_DSYNC semantics now, but using the correct symbolic name for it. + * This new value is used to request true Posix O_SYNC semantics. It is + * defined in this strange way to make sure applications compiled against + * new headers get at least O_DSYNC semantics on older kernels. + * + * This has the nice side-effect that we can simply test for O_DSYNC + * wherever we do not care if O_DSYNC or O_SYNC is used. + * + * Note: __O_SYNC must never be used directly. + */ +#define __O_SYNC 020000000 +#define O_SYNC (__O_SYNC|O_DSYNC) #define F_GETLK 7 #define F_SETLK 8 diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 9a3334ae282e..62619f25132f 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -178,25 +178,18 @@ SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, off) { - struct file *file = NULL; - unsigned long ret = -EBADF; + unsigned long ret = -EINVAL; #if 0 if (flags & (_MAP_HASSEMAPHORE | _MAP_INHERIT | _MAP_UNALIGNED)) printk("%s: unimplemented OSF mmap flags %04lx\n", current->comm, flags); #endif - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - down_write(¤t->mm->mmap_sem); - ret = do_mmap(file, addr, len, prot, flags, off); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); + if ((off + PAGE_ALIGN(len)) < off) + goto out; + if (off & ~PAGE_MASK) + goto out; + ret = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); out: return ret; } diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 10b403554b65..7b2c56d8f930 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -197,7 +197,7 @@ setup_memory_node(int nid, void *kernel_end) } if (bootmap_start == -1) - panic("couldn't find a contigous place for the bootmap"); + panic("couldn't find a contiguous place for the bootmap"); /* Allocate the bootmap and mark the whole MM as reserved. */ bootmap_size = init_bootmem_node(NODE_DATA(nid), bootmap_start, diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 7713a08bb10c..37bda5f3dde3 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) { struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); - /* XXX: I'm usure, but it seems so */ + /* XXX: I'm unsure, but it seems so */ return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)); } diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/da830_omapl137_defconfig deleted file mode 100644 index 7c8e38f5c5ab..000000000000 --- a/arch/arm/configs/da830_omapl137_defconfig +++ /dev/null @@ -1,1254 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2-davinci1 -# Wed May 13 15:33:29 2009 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -CONFIG_COMPAT_BRK=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_CLK=y -# CONFIG_SLOW_WORK is not set -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_FREEZER is not set - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -CONFIG_ARCH_DAVINCI=y -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set -CONFIG_CP_INTC=y - -# -# TI DaVinci Implementations -# - -# -# DaVinci Core Type -# -# CONFIG_ARCH_DAVINCI_DM644x is not set -# CONFIG_ARCH_DAVINCI_DM646x is not set -# CONFIG_ARCH_DAVINCI_DM355 is not set -CONFIG_ARCH_DAVINCI_DA830=y - -# -# DaVinci Board Type -# -CONFIG_MACH_DAVINCI_DA830_EVM=y -CONFIG_DAVINCI_MUX=y -# CONFIG_DAVINCI_MUX_DEBUG is not set -# CONFIG_DAVINCI_MUX_WARNINGS is not set -CONFIG_DAVINCI_RESET_CLOCKS=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -CONFIG_CPU_DCACHE_WRITETHROUGH=y -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_COMMON_CLKDEV=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_HIGHMEM is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y -CONFIG_LEDS=y -# CONFIG_LEDS_CPU is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# CPU Power Management -# -# CONFIG_CPU_IDLE is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_HAVE_AOUT=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set -# CONFIG_IP_VS is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_NF_DEFRAG_IPV4 is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_PHONET is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=1 -CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_ISL29003 is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=y -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_93CX6 is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_LIBFC is not set -# CONFIG_LIBFCOE is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -CONFIG_LXT_PHY=y -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -CONFIG_LSI_ET1011C_PHY=y -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -CONFIG_TI_DAVINCI_EMAC=y -# CONFIG_DM9000 is not set -# CONFIG_ETHOC is not set -# CONFIG_SMC911X is not set -# CONFIG_SMSC911X is not set -# CONFIG_DNET is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -CONFIG_NETCONSOLE=y -# CONFIG_NETCONSOLE_DYNAMIC is not set -CONFIG_NETPOLL=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=m -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_XTKBD=m -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_AD7879_I2C is not set -# CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_INEXIO is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_TOUCHSCREEN_TSC2007 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -# CONFIG_VT_CONSOLE is not set -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_DAVINCI=y -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set - -# -# Memory mapped GPIO expanders: -# - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -CONFIG_GPIO_PCF857X=m - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_DAVINCI_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TPS65010 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=m -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_JACK=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_ARM=y -CONFIG_SND_SOC=m -CONFIG_SND_DAVINCI_SOC=m -CONFIG_SND_SOC_I2C_AND_SPI=m -# CONFIG_SND_SOC_ALL_CODECS is not set -# CONFIG_SOUND_PRIME is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_PERIPHERAL is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_IMX is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_CI13XXX is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -# CONFIG_FUSE_FS is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -CONFIG_MINIX_FS=m -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_DEBUG_PREEMPT=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_PI_LIST=y -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -# CONFIG_PAGE_POISONING is not set -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_DYNAMIC_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_ARM_UNWIND=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=m -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_NLATTR=y diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 842a70b079bf..50bd25a10f0d 100644 --- a/arch/arm/configs/da850_omapl138_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-davinci1 -# Mon Jun 29 07:54:15 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Oct 22 12:19:19 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -48,11 +46,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -62,8 +61,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -80,7 +78,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -93,6 +90,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -100,12 +101,16 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -118,7 +123,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -139,19 +144,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -160,25 +168,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set CONFIG_ARCH_DAVINCI=y # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set CONFIG_CP_INTC=y # @@ -191,7 +201,7 @@ CONFIG_CP_INTC=y # CONFIG_ARCH_DAVINCI_DM644x is not set # CONFIG_ARCH_DAVINCI_DM355 is not set # CONFIG_ARCH_DAVINCI_DM646x is not set -# CONFIG_ARCH_DAVINCI_DA830 is not set +CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y CONFIG_ARCH_DAVINCI_DA8XX=y # CONFIG_ARCH_DAVINCI_DM365 is not set @@ -199,7 +209,14 @@ CONFIG_ARCH_DAVINCI_DA8XX=y # # DaVinci Board Type # +CONFIG_MACH_DAVINCI_DA830_EVM=y +CONFIG_DA830_UI=y +CONFIG_DA830_UI_LCD=y +# CONFIG_DA830_UI_NAND is not set CONFIG_MACH_DAVINCI_DA850_EVM=y +CONFIG_DA850_UI_EXP=y +CONFIG_DA850_UI_NONE=y +# CONFIG_DA850_UI_RMII is not set CONFIG_DAVINCI_MUX=y # CONFIG_DAVINCI_MUX_DEBUG is not set # CONFIG_DAVINCI_MUX_WARNINGS is not set @@ -212,7 +229,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -225,9 +242,9 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_COMMON_CLKDEV=y # @@ -248,11 +265,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -268,12 +286,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y # CONFIG_LEDS_CPU is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -287,7 +307,24 @@ CONFIG_CMDLINE="" # # CPU Power Management # -# CONFIG_CPU_IDLE is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=m +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Floating point emulation @@ -401,6 +438,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IP6_NF_IPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -415,6 +453,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -440,6 +479,7 @@ CONFIG_NETFILTER_ADVANCED=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -460,6 +500,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -471,6 +512,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -494,10 +536,6 @@ CONFIG_BLK_DEV_SD=m # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -522,7 +560,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -553,7 +590,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_TI_DAVINCI_EMAC is not set +CONFIG_TI_DAVINCI_EMAC=y # CONFIG_DM9000 is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set @@ -567,12 +604,11 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -588,6 +624,7 @@ CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -611,23 +648,30 @@ CONFIG_INPUT_EVBUG=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=m -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_XTKBD=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -636,6 +680,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -684,6 +729,7 @@ CONFIG_HW_RANDOM=m # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -695,6 +741,7 @@ CONFIG_I2C_HELPER_AUTO=y # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -715,14 +762,17 @@ CONFIG_I2C_DAVINCI=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -736,8 +786,8 @@ CONFIG_GPIOLIB=y # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCF857X=y # # PCI GPIO expanders: @@ -746,11 +796,14 @@ CONFIG_GPIO_PCF857X=m # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -782,31 +835,56 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +CONFIG_REGULATOR_TPS6507X=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_DAVINCI is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_DA8XX=y +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -819,6 +897,16 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=m @@ -834,6 +922,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set @@ -842,6 +935,8 @@ CONFIG_SND_DRIVERS=y CONFIG_SND_ARM=y CONFIG_SND_SOC=m CONFIG_SND_DAVINCI_SOC=m +# CONFIG_SND_DA830_SOC_EVM is not set +# CONFIG_SND_DA850_SOC_EVM is not set CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set @@ -849,14 +944,17 @@ CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -877,14 +975,17 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -943,7 +1044,6 @@ CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1039,6 +1139,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1056,6 +1157,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y @@ -1076,29 +1178,29 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -1125,7 +1227,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1157,11 +1258,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index ddffe39d9f87..bd656e8e6e4c 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3-davinci1 -# Fri Jul 17 08:26:52 2009 +# Linux kernel version: 2.6.32-rc4 +# Mon Oct 12 14:13:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -46,11 +45,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -91,17 +91,15 @@ CONFIG_SHMEM=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -145,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -159,6 +158,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -181,11 +181,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set CONFIG_ARCH_DAVINCI=y # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set CONFIG_AINTC=y CONFIG_ARCH_DAVINCI_DMx=y @@ -208,6 +210,7 @@ CONFIG_ARCH_DAVINCI_DM365=y # CONFIG_MACH_DAVINCI_EVM=y CONFIG_MACH_SFFSDR=y +CONFIG_MACH_NEUROS_OSD2=y CONFIG_MACH_DAVINCI_DM355_EVM=y CONFIG_MACH_DM355_LEOPARD=y CONFIG_MACH_DAVINCI_DM6467_EVM=y @@ -224,7 +227,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -239,6 +242,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_COMMON_CLKDEV=y # @@ -259,6 +263,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -280,6 +286,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y # CONFIG_LEDS_CPU is not set @@ -412,6 +419,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IP6_NF_IPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -452,6 +460,7 @@ CONFIG_NETFILTER_ADVANCED=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -461,9 +470,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -499,7 +508,7 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=m @@ -694,12 +703,10 @@ CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -734,6 +741,7 @@ CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -745,10 +753,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVBUG=m @@ -757,12 +762,16 @@ CONFIG_INPUT_EVBUG=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=m +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set CONFIG_KEYBOARD_XTKBD=m @@ -777,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -787,7 +797,17 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +CONFIG_INPUT_DM355EVM=m +CONFIG_INPUT_DM365EVM=m # # Hardware I/O ports @@ -828,13 +848,13 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -868,13 +888,17 @@ CONFIG_I2C_DAVINCI=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -889,7 +913,7 @@ CONFIG_GPIOLIB=y # # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set -CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_PCF857X=y # # PCI GPIO expanders: @@ -898,10 +922,19 @@ CONFIG_GPIO_PCF857X=m # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -950,6 +983,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -959,9 +993,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -988,7 +1020,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set -# CONFIG_MFD_DM355EVM_MSP is not set +CONFIG_MFD_DM355EVM_MSP=y # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set @@ -999,9 +1031,11 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -1013,9 +1047,9 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -1032,6 +1066,7 @@ CONFIG_FIRMWARE_EDID=y # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_DAVINCI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set @@ -1101,7 +1136,6 @@ CONFIG_SND_SOC_TLV320AIC3X=m # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1130,6 +1164,7 @@ CONFIG_HID_CYPRESS=m CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=m +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=m # CONFIG_LOGITECH_FF is not set @@ -1176,6 +1211,7 @@ CONFIG_USB_MON=m # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set @@ -1269,6 +1305,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -1286,6 +1323,7 @@ CONFIG_USB_ZERO=m # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set @@ -1316,8 +1354,10 @@ CONFIG_MMC_BLOCK=m # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_DAVINCI=m # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m @@ -1345,6 +1385,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=m @@ -1370,6 +1411,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_DM355EVM is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1399,8 +1441,11 @@ CONFIG_RTC_INTF_DEV=y # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1429,6 +1474,7 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1500,7 +1546,6 @@ CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1596,6 +1641,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1634,11 +1680,14 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1663,7 +1712,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -CONFIG_ARM_UNWIND=y +# CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1681,7 +1730,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1713,11 +1761,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig index 338267674075..1b39691b816f 100644 --- a/arch/arm/configs/htcherald_defconfig +++ b/arch/arm/configs/htcherald_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc6 -# Sat Nov 14 10:56:01 2009 +# Linux kernel version: 2.6.32-rc8 +# Sat Dec 5 12:16:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -198,7 +198,9 @@ CONFIG_ARCH_OMAP1=y # OMAP Feature Selections # # CONFIG_OMAP_RESET_CLOCKS is not set -# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set CONFIG_OMAP_MPU_TIMER=y @@ -207,6 +209,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set # CONFIG_OMAP_LL_DEBUG_NONE is not set +CONFIG_OMAP_SERIAL_WAKE=y # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig new file mode 100644 index 000000000000..7c8515e65c02 --- /dev/null +++ b/arch/arm/configs/omap3_touchbook_defconfig @@ -0,0 +1,2431 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Fri Dec 4 16:02:17 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +CONFIG_MACH_OMAP3_TOUCHBOOK=y +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_OMAP_3630SDP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +# CONFIG_IPV6_PIMSM_V2 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_DEBUG=y +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_BRIDGE_NF_EBTABLES is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +CONFIG_BT_HCIBFUSB=y +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +# CONFIG_RXKAD is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +CONFIG_EEPROM_93CX6=y +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +# CONFIG_DM_MULTIPATH_ST is not set +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# WiMAX Wireless Broadband devices +# +# CONFIG_WIMAX_I2400M_USB is not set +# CONFIG_WIMAX_I2400M_SDIO is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_ATM_DRIVERS is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOATM is not set +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +CONFIG_BATTERY_BQ27x00=y +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_OXU210HP_HCD=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP210X is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +# CONFIG_USB_SERIAL_QUALCOMM is not set +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_ATM is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ZERO_HNPTEST=y +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +CONFIG_USB_MIDI_GADGET=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_OTUS is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 84829587d55a..592457cfbbe5 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -963,10 +963,32 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -CONFIG_FB_OMAP=y -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_LCD_VGA is not set # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=4 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +CONFIG_PANEL_SHARP_LS037V7DW01=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index a464ca332a23..2319113c86bf 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -1,26 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Tue Jun 9 12:36:23 2009 +# Linux kernel version: 2.6.32 +# Sun Dec 6 23:37:45 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_LOCKBREAK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -39,11 +42,12 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -52,8 +56,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED=y is not set -# CONFIG_SYSFS_DEPRECATED_V2=y is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -70,7 +73,6 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,6 +85,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -90,13 +96,16 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -110,7 +119,7 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -131,6 +140,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -142,8 +152,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -166,10 +178,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set # # TI OMAP Implementations @@ -190,9 +205,12 @@ CONFIG_ARCH_OMAP4=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y -CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set -# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y # # OMAP Board Type @@ -207,7 +225,7 @@ CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -222,9 +240,10 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_ARM_THUMB is not set # CONFIG_ARM_THUMBEE is not set # CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_DCACHE_DISABLE=y +# CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -245,18 +264,20 @@ CONFIG_ARM_GIC=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set -CONFIG_LOCAL_TIMERS=y -# CONFIG_PREEMPT is not set +# CONFIG_LOCAL_TIMERS is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -271,10 +292,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -# CONFIG_UNEVICTABLE_LRU is not set CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -298,9 +322,11 @@ CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600 # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y -# CONFIG_NEON is not set +CONFIG_NEON=y # # Userspace binary formats @@ -325,6 +351,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -342,6 +369,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -355,6 +383,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -427,6 +456,11 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -447,11 +481,14 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -472,21 +509,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -511,14 +535,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -535,9 +562,12 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -601,7 +631,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # # Partition Types @@ -673,23 +702,24 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_SOFTLOCKUP is not set CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -708,31 +738,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -754,7 +775,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -796,11 +816,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index eef93627fb13..4b00a4306812 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -610,7 +610,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index f0e7d0f85582..0d7e37a3651b 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -629,7 +629,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h index 8eebf89f5ab1..41f99c573b93 100644 --- a/arch/arm/include/asm/mman.h +++ b/arch/arm/include/asm/mman.h @@ -1 +1,4 @@ #include <asm-generic/mman.h> + +#define arch_mmap_check(addr, len, flags) \ + (((flags) & MAP_FIXED && (addr) < FIRST_USER_ADDRESS) ? -EINVAL : 0) diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index f58c1156e779..9314a2d681f1 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -172,7 +172,7 @@ /* 160 */ CALL(sys_sched_get_priority_min) CALL(sys_sched_rr_get_interval) CALL(sys_nanosleep) - CALL(sys_arm_mremap) + CALL(sys_mremap) CALL(sys_setresuid16) /* 165 */ CALL(sys_getresuid16) CALL(sys_ni_syscall) /* vm86 */ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index f0fe95b7085d..2c1db77d7848 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -416,12 +416,12 @@ sys_mmap2: tst r5, #PGOFF_MASK moveq r5, r5, lsr #PAGE_SHIFT - 12 streq r5, [sp, #4] - beq do_mmap2 + beq sys_mmap_pgoff mov r0, #-EINVAL mov pc, lr #else str r5, [sp, #4] - b do_mmap2 + b sys_mmap_pgoff #endif ENDPROC(sys_mmap2) diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 78ecaac65206..ae4027bd01bd 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -28,41 +28,6 @@ #include <linux/ipc.h> #include <linux/uaccess.h> -extern unsigned long do_mremap(unsigned long addr, unsigned long old_len, - unsigned long new_len, unsigned long flags, - unsigned long new_addr); - -/* common code for old and new mmaps */ -inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EINVAL; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - if (flags & MAP_FIXED && addr < FIRST_USER_ADDRESS) - goto out; - - error = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - struct mmap_arg_struct { unsigned long addr; unsigned long len; @@ -84,29 +49,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); out: return error; } -asmlinkage unsigned long -sys_arm_mremap(unsigned long addr, unsigned long old_len, - unsigned long new_len, unsigned long flags, - unsigned long new_addr) -{ - unsigned long ret = -EINVAL; - - if (flags & MREMAP_FIXED && new_addr < FIRST_USER_ADDRESS) - goto out; - - down_write(¤t->mm->mmap_sem); - ret = do_mremap(addr, old_len, new_len, flags, new_addr); - up_write(¤t->mm->mmap_sem); - -out: - return ret; -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index a57af3e99c7c..809114d5a5a6 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -866,6 +866,57 @@ static void __init at91_add_device_rtc(void) {} /* -------------------------------------------------------------------- + * Touchscreen + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) +static u64 tsadcc_dmamask = DMA_BIT_MASK(32); +static struct at91_tsadcc_data tsadcc_data; + +static struct resource tsadcc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TSC, + .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_TSC, + .end = AT91SAM9G45_ID_TSC, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device at91sam9g45_tsadcc_device = { + .name = "atmel_tsadcc", + .id = -1, + .dev = { + .dma_mask = &tsadcc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tsadcc_data, + }, + .resource = tsadcc_resources, + .num_resources = ARRAY_SIZE(tsadcc_resources), +}; + +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) +{ + if (!data) + return; + + at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */ + at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */ + at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */ + at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */ + + tsadcc_data = *data; + platform_device_register(&at91sam9g45_tsadcc_device); +} +#else +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- * RTT * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d345f5453dbe..53aaa94df75a 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -622,6 +622,7 @@ static void __init at91_add_device_tc(void) { } #if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) static u64 tsadcc_dmamask = DMA_BIT_MASK(32); +static struct at91_tsadcc_data tsadcc_data; static struct resource tsadcc_resources[] = { [0] = { @@ -642,22 +643,27 @@ static struct platform_device at91sam9rl_tsadcc_device = { .dev = { .dma_mask = &tsadcc_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tsadcc_data, }, .resource = tsadcc_resources, .num_resources = ARRAY_SIZE(tsadcc_resources), }; -void __init at91_add_device_tsadcc(void) +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) { + if (!data) + return; + at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */ at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */ at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */ at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */ + tsadcc_data = *data; platform_device_register(&at91sam9rl_tsadcc_device); } #else -void __init at91_add_device_tsadcc(void) {} +void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} #endif diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 1cf4d8681078..98f9f4bc9396 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -229,6 +229,16 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; /* + * Touchscreen + */ +static struct at91_tsadcc_data ek_tsadcc_data = { + .adc_clock = 300000, + .pendet_debounce = 0x0d, + .ts_sample_hold_time = 0x0a, +}; + + +/* * GPIO Buttons */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -379,6 +389,8 @@ static void __init ek_board_init(void) at91_add_device_i2c(0, NULL, 0); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); + /* Touch Screen */ + at91_add_device_tsadcc(&ek_tsadcc_data); /* Push Buttons */ ek_add_device_buttons(); /* AC97 */ diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index bd28e989e54e..7ac20f3a2067 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -243,6 +243,16 @@ static struct gpio_led ek_leds[] = { /* + * Touchscreen + */ +static struct at91_tsadcc_data ek_tsadcc_data = { + .adc_clock = 1000000, + .pendet_debounce = 0x0f, + .ts_sample_hold_time = 0x03, +}; + + +/* * GPIO Buttons */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -310,7 +320,7 @@ static void __init ek_board_init(void) /* AC97 */ at91_add_device_ac97(&ek_ac97_data); /* Touch Screen Controller */ - at91_add_device_tsadcc(); + at91_add_device_tsadcc(&ek_tsadcc_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* Push Buttons */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2295d80dd893..bb6f6a7ba5e0 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -187,7 +187,12 @@ extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); extern void __init at91_add_device_isi(void); /* Touchscreen Controller */ -extern void __init at91_add_device_tsadcc(void); +struct at91_tsadcc_data { + unsigned int adc_clock; + u8 pendet_debounce; + u8 ts_sample_hold_time; +}; +extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ struct at91_can_data { diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h index e5f60bf5a1f3..56654d23c3d7 100644 --- a/arch/arm/mach-bcmring/include/csp/reg.h +++ b/arch/arm/mach-bcmring/include/csp/reg.h @@ -16,7 +16,7 @@ /** * @file reg.h * -* @brief Generic register defintions used in CSP +* @brief Generic register definitions used in CSP */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index 375066ad0186..cbf334d1c761 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h @@ -83,7 +83,7 @@ typedef struct { * @brief Get next available transaction width * * -* @return On sucess : Next avail able transaction width +* @return On success : Next available transaction width * On failure : dmacHw_TRANSACTION_WIDTH_8 * * @note diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h index 86bb58d4f58c..ad58cf873377 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h +++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h @@ -16,7 +16,7 @@ /** * @file mm_addr.h * -* @brief Memory Map address defintions +* @brief Memory Map address definitions * * @note * None diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 847980c85c88..1f2c5319c056 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about t /** * Creates a descriptor ring from a memory mapping. * -* @return 0 on sucess, error code otherwise. +* @return 0 on success, error code otherwise. */ /****************************************************************************/ diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 40866c643f13..033bfede6b67 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -32,11 +32,13 @@ config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137 based system" select CP_INTC select ARCH_DAVINCI_DA8XX + select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138 based system" select CP_INTC select ARCH_DAVINCI_DA8XX + select ARCH_HAS_CPUFREQ config ARCH_DAVINCI_DA8XX bool @@ -63,6 +65,13 @@ config MACH_SFFSDR Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. +config MACH_NEUROS_OSD2 + bool "Neuros OSD2 Open Television Set Top Box" + depends on ARCH_DAVINCI_DM644x + help + Configure this option to specify the whether the board used + for development is a Neuros OSD2 Open Set Top Box. + config MACH_DAVINCI_DM355_EVM bool "TI DM355 EVM" default ARCH_DAVINCI_DM355 @@ -98,16 +107,66 @@ config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137 Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 + select GPIO_PCF857X help Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. +choice + prompt "Select DA830/OMAP-L137 UI board peripheral" + depends on MACH_DAVINCI_DA830_EVM + help + The presence of UI card on the DA830/OMAP-L137 EVM is detected + automatically based on successful probe of the I2C based GPIO + expander on that board. This option selected in this menu has + an effect only in case of a successful UI card detection. + +config DA830_UI_LCD + bool "LCD" + help + Say Y here to use the LCD as a framebuffer or simple character + display. + +config DA830_UI_NAND + bool "NAND flash" + help + Say Y here to use the NAND flash. Do not forget to setup + the switch correctly. +endchoice + config MACH_DAVINCI_DA850_EVM bool "TI DA850/OMAP-L138 Reference Platform" default ARCH_DAVINCI_DA850 depends on ARCH_DAVINCI_DA850 + select GPIO_PCA953X help Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. +choice + prompt "Select peripherals connected to expander on UI board" + depends on MACH_DAVINCI_DA850_EVM + help + The presence of User Interface (UI) card on the DA850/OMAP-L138 + EVM is detected automatically based on successful probe of the I2C + based GPIO expander on that card. This option selected in this + menu has an effect only in case of a successful UI card detection. + +config DA850_UI_NONE + bool "No peripheral is enabled" + help + Say Y if you do not want to enable any of the peripherals connected + to TCA6416 expander on DA850/OMAP-L138 EVM UI card + +config DA850_UI_RMII + bool "RMII Ethernet PHY" + help + Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM. + This PHY is found on the UI daughter card that is supplied with + the EVM. + NOTE: Please take care while choosing this option, MII PHY will + not be functional if RMII mode is selected. + +endchoice + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2e11e847313b..eeb9230d8844 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -23,9 +23,14 @@ obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o +obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o + +# Power Management +obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index bfbb63936f33..31dc9901e556 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -10,51 +10,194 @@ * or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/console.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/irqs.h> #include <mach/cp_intc.h> +#include <mach/mux.h> +#include <mach/nand.h> #include <mach/da8xx.h> -#include <mach/asp.h> +#include <mach/usb.h> #define DA830_EVM_PHY_MASK 0x0 #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ -static struct at24_platform_data da830_evm_i2c_eeprom_info = { - .byte_len = SZ_256K / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, -}; +#define DA830_EMIF25_ASYNC_DATA_CE3_BASE 0x62000000 +#define DA830_EMIF25_CONTROL_BASE 0x68000000 -static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { - { - I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &da830_evm_i2c_eeprom_info, - }, - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - } +/* + * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. + */ +#define ON_BD_USB_DRV GPIO_TO_PIN(1, 15) +#define ON_BD_USB_OVC GPIO_TO_PIN(2, 4) + +static const short da830_evm_usb11_pins[] = { + DA830_GPIO1_15, DA830_GPIO2_4, + -1 }; -static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { - .bus_freq = 100, /* kHz */ - .bus_delay = 0, /* usec */ +static da8xx_ocic_handler_t da830_evm_usb_ocic_handler; + +static int da830_evm_usb_set_power(unsigned port, int on) +{ + gpio_set_value(ON_BD_USB_DRV, on); + return 0; +} + +static int da830_evm_usb_get_power(unsigned port) +{ + return gpio_get_value(ON_BD_USB_DRV); +} + +static int da830_evm_usb_get_oci(unsigned port) +{ + return !gpio_get_value(ON_BD_USB_OVC); +} + +static irqreturn_t da830_evm_usb_ocic_irq(int, void *); + +static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) +{ + int irq = gpio_to_irq(ON_BD_USB_OVC); + int error = 0; + + if (handler != NULL) { + da830_evm_usb_ocic_handler = handler; + + error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "OHCI over-current indicator", NULL); + if (error) + printk(KERN_ERR "%s: could not request IRQ to watch " + "over-current indicator changes\n", __func__); + } else + free_irq(irq, NULL); + + return error; +} + +static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { + .set_power = da830_evm_usb_set_power, + .get_power = da830_evm_usb_get_power, + .get_oci = da830_evm_usb_get_oci, + .ocic_notify = da830_evm_usb_ocic_notify, + + /* TPS2065 switch @ 5V */ + .potpgt = (3 + 1) / 2, /* 3 ms max */ }; +static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) +{ + da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1); + return IRQ_HANDLED; +} + +static __init void da830_evm_usb_init(void) +{ + u32 cfgchip2; + int ret; + + /* + * Set up USB clock/mode in the CFGCHIP2 register. + * FYI: CFGCHIP2 is 0x0000ef00 initially. + */ + cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)); + + /* USB2.0 PHY reference clock is 24 MHz */ + cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; + + /* + * Select internal reference clock for USB 2.0 PHY + * and use it as a clock source for USB 1.1 PHY + * (this is the default setting anyway). + */ + cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX; + cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX; + + /* + * We have to override VBUS/ID signals when MUSB is configured into the + * host-only mode -- ID pin will float if no cable is connected, so the + * controller won't be able to drive VBUS thinking that it's a B-device. + * Otherwise, we want to use the OTG mode and enable VBUS comparators. + */ + cfgchip2 &= ~CFGCHIP2_OTGMODE; +#ifdef CONFIG_USB_MUSB_HOST + cfgchip2 |= CFGCHIP2_FORCE_HOST; +#else + cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; +#endif + + __raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)); + + /* USB_REFCLKIN is not used. */ + ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); + if (ret) + pr_warning("%s: USB 2.0 PinMux setup failed: %d\n", + __func__, ret); + else { + /* + * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A), + * with the power on to power good time of 3 ms. + */ + ret = da8xx_register_usb20(1000, 3); + if (ret) + pr_warning("%s: USB 2.0 registration failed: %d\n", + __func__, ret); + } + + ret = da8xx_pinmux_setup(da830_evm_usb11_pins); + if (ret) { + pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", + __func__, ret); + return; + } + + ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV"); + if (ret) { + printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "power control: %d\n", __func__, ret); + return; + } + gpio_direction_output(ON_BD_USB_DRV, 0); + + ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC"); + if (ret) { + printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "over-current indicator: %d\n", __func__, ret); + return; + } + gpio_direction_input(ON_BD_USB_OVC); + + ret = da8xx_register_usb11(&da830_evm_usb11_pdata); + if (ret) + pr_warning("%s: USB 1.1 registration failed: %d\n", + __func__, ret); +} + static struct davinci_uart_config da830_evm_uart_config __initdata = { .enabled_uarts = 0x7, }; +static const short da830_evm_mcasp1_pins[] = { + DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1, + DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5, + DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10, + DA830_AXR1_11, + -1 +}; + static u8 da830_iis_serializer_direction[] = { RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE, @@ -74,6 +217,271 @@ static struct snd_platform_data da830_evm_snd_data = { .rxnumevt = 1, }; +/* + * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS. + */ +static const short da830_evm_mmc_sd_pins[] = { + DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, + DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, + DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, + DA830_MMCSD_CMD, DA830_GPIO2_1, DA830_GPIO2_2, + -1 +}; + +#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) + +static int da830_evm_mmc_get_ro(int index) +{ + return gpio_get_value(DA830_MMCSD_WP_PIN); +} + +static struct davinci_mmc_config da830_evm_mmc_config = { + .get_ro = da830_evm_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_2, +}; + +static inline void da830_evm_init_mmc(void) +{ + int ret; + + ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins); + if (ret) { + pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n", + ret); + return; + } + + ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP"); + if (ret) { + pr_warning("da830_evm_init: can not open GPIO %d\n", + DA830_MMCSD_WP_PIN); + return; + } + gpio_direction_input(DA830_MMCSD_WP_PIN); + + ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); + if (ret) { + pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", + ret); + gpio_free(DA830_MMCSD_WP_PIN); + } +} + +/* + * UI board NAND/NOR flashes only use 8-bit data bus. + */ +static const short da830_evm_emif25_pins[] = { + DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, + DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, + DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3, + DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7, + DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11, + DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE, + DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0, + -1 +}; + +#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) +#define HAS_MMC 1 +#else +#define HAS_MMC 0 +#endif + +#ifdef CONFIG_DA830_UI_NAND +static struct mtd_partition da830_evm_nand_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + [0] = { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + [1] = { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* kernel */ + [2] = { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0, + }, + /* file system */ + [3] = { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; + +/* flash bbt decriptors */ +static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' }; +static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' }; + +static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | + NAND_BBT_WRITE | NAND_BBT_2BIT | + NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 2, + .len = 4, + .veroffs = 16, + .maxblocks = 4, + .pattern = da830_evm_nand_bbt_pattern +}; + +static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | + NAND_BBT_WRITE | NAND_BBT_2BIT | + NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 2, + .len = 4, + .veroffs = 16, + .maxblocks = 4, + .pattern = da830_evm_nand_mirror_pattern +}; + +static struct davinci_nand_pdata da830_evm_nand_pdata = { + .parts = da830_evm_nand_partitions, + .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), + .ecc_mode = NAND_ECC_HW, + .ecc_bits = 4, + .options = NAND_USE_FLASH_BBT, + .bbt_td = &da830_evm_nand_bbt_main_descr, + .bbt_md = &da830_evm_nand_bbt_mirror_descr, +}; + +static struct resource da830_evm_nand_resources[] = { + [0] = { /* First memory resource is NAND I/O window */ + .start = DA830_EMIF25_ASYNC_DATA_CE3_BASE, + .end = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* Second memory resource is AEMIF control registers */ + .start = DA830_EMIF25_CONTROL_BASE, + .end = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da830_evm_nand_device = { + .name = "davinci_nand", + .id = 1, + .dev = { + .platform_data = &da830_evm_nand_pdata, + }, + .num_resources = ARRAY_SIZE(da830_evm_nand_resources), + .resource = da830_evm_nand_resources, +}; + +static inline void da830_evm_init_nand(int mux_mode) +{ + int ret; + + if (HAS_MMC) { + pr_warning("WARNING: both MMC/SD and NAND are " + "enabled, but they share AEMIF pins.\n" + "\tDisable MMC/SD for NAND support.\n"); + return; + } + + ret = da8xx_pinmux_setup(da830_evm_emif25_pins); + if (ret) + pr_warning("da830_evm_init: emif25 mux setup failed: %d\n", + ret); + + ret = platform_device_register(&da830_evm_nand_device); + if (ret) + pr_warning("da830_evm_init: NAND device not registered.\n"); + + gpio_direction_output(mux_mode, 1); +} +#else +static inline void da830_evm_init_nand(int mux_mode) { } +#endif + +#ifdef CONFIG_DA830_UI_LCD +static inline void da830_evm_init_lcdc(int mux_mode) +{ + int ret; + + ret = da8xx_pinmux_setup(da830_lcdcntl_pins); + if (ret) + pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n", + ret); + + ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata); + if (ret) + pr_warning("da830_evm_init: lcd setup failed: %d\n", ret); + + gpio_direction_output(mux_mode, 0); +} +#else +static inline void da830_evm_init_lcdc(int mux_mode) { } +#endif + +static struct at24_platform_data da830_evm_i2c_eeprom_info = { + .byte_len = SZ_256K / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, +}; + +static int __init da830_evm_ui_expander_setup(struct i2c_client *client, + int gpio, unsigned ngpio, void *context) +{ + gpio_request(gpio + 6, "UI MUX_MODE"); + + /* Drive mux mode low to match the default without UI card */ + gpio_direction_output(gpio + 6, 0); + + da830_evm_init_lcdc(gpio + 6); + + da830_evm_init_nand(gpio + 6); + + return 0; +} + +static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *context) +{ + gpio_free(gpio + 6); + return 0; +} + +static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { + .gpio_base = DAVINCI_N_GPIO, + .setup = da830_evm_ui_expander_setup, + .teardown = da830_evm_ui_expander_teardown, +}; + +static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &da830_evm_i2c_eeprom_info, + }, + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + }, + { + I2C_BOARD_INFO("pcf8574", 0x3f), + .platform_data = &da830_evm_ui_expander_info, + }, +}; + +static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { + .bus_freq = 100, /* kHz */ + .bus_delay = 0, /* usec */ +}; + static __init void da830_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -94,6 +502,8 @@ static __init void da830_evm_init(void) pr_warning("da830_evm_init: i2c0 registration failed: %d\n", ret); + da830_evm_usb_init(); + soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1; @@ -117,12 +527,18 @@ static __init void da830_evm_init(void) i2c_register_board_info(1, da830_evm_i2c_devices, ARRAY_SIZE(da830_evm_i2c_devices)); - ret = da8xx_pinmux_setup(da830_mcasp1_pins); + ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins); if (ret) pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n", ret); - da8xx_init_mcasp(1, &da830_evm_snd_data); + da8xx_register_mcasp(1, &da830_evm_snd_data); + + da830_evm_init_mmc(); + + ret = da8xx_register_rtc(); + if (ret) + pr_warning("da830_evm_init: rtc setup failed: %d\n", ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -146,7 +562,7 @@ static void __init da830_evm_map_io(void) da830_init(); } -MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM") +MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c759d72494e0..62b98bffc158 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -12,36 +12,38 @@ * or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/console.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> +#include <linux/i2c/pca953x.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/irqs.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/nand.h> +#include <mach/mux.h> #define DA850_EVM_PHY_MASK 0x1 #define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ +#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) -#define DA850_LCD_PWR_PIN GPIO_TO_PIN(8, 10) #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) +#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "NOR filesystem", @@ -143,10 +145,149 @@ static struct platform_device da850_evm_nandflash_device = { .resource = da850_evm_nandflash_resource, }; +static struct platform_device *da850_evm_devices[] __initdata = { + &da850_evm_nandflash_device, + &da850_evm_norflash_device, +}; + +#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 +#define DA8XX_AEMIF_ASIZE_16BIT 0x1 + +static void __init da850_evm_init_nor(void) +{ + void __iomem *aemif_addr; + + aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); + + /* Configure data bus width of CS2 to 16 bit */ + writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | + DA8XX_AEMIF_ASIZE_16BIT, + aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); + + iounmap(aemif_addr); +} + +static u32 ui_card_detected; + +#if defined(CONFIG_MMC_DAVINCI) || \ + defined(CONFIG_MMC_DAVINCI_MODULE) +#define HAS_MMC 1 +#else +#define HAS_MMC 0 +#endif + +static __init void da850_evm_setup_nor_nand(void) +{ + int ret = 0; + + if (ui_card_detected & !HAS_MMC) { + ret = da8xx_pinmux_setup(da850_nand_pins); + if (ret) + pr_warning("da850_evm_init: nand mux setup failed: " + "%d\n", ret); + + ret = da8xx_pinmux_setup(da850_nor_pins); + if (ret) + pr_warning("da850_evm_init: nor mux setup failed: %d\n", + ret); + + da850_evm_init_nor(); + + platform_add_devices(da850_evm_devices, + ARRAY_SIZE(da850_evm_devices)); + } +} + +#ifdef CONFIG_DA850_UI_RMII +static inline void da850_evm_setup_emac_rmii(int rmii_sel) +{ + struct davinci_soc_info *soc_info = &davinci_soc_info; + + soc_info->emac_pdata->rmii_en = 1; + gpio_set_value(rmii_sel, 0); +} +#else +static inline void da850_evm_setup_emac_rmii(int rmii_sel) { } +#endif + +static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, + unsigned ngpio, void *c) +{ + int sel_a, sel_b, sel_c, ret; + + sel_a = gpio + 7; + sel_b = gpio + 6; + sel_c = gpio + 5; + + ret = gpio_request(sel_a, "sel_a"); + if (ret) { + pr_warning("Cannot open UI expander pin %d\n", sel_a); + goto exp_setup_sela_fail; + } + + ret = gpio_request(sel_b, "sel_b"); + if (ret) { + pr_warning("Cannot open UI expander pin %d\n", sel_b); + goto exp_setup_selb_fail; + } + + ret = gpio_request(sel_c, "sel_c"); + if (ret) { + pr_warning("Cannot open UI expander pin %d\n", sel_c); + goto exp_setup_selc_fail; + } + + /* deselect all functionalities */ + gpio_direction_output(sel_a, 1); + gpio_direction_output(sel_b, 1); + gpio_direction_output(sel_c, 1); + + ui_card_detected = 1; + pr_info("DA850/OMAP-L138 EVM UI card detected\n"); + + da850_evm_setup_nor_nand(); + + da850_evm_setup_emac_rmii(sel_a); + + return 0; + +exp_setup_selc_fail: + gpio_free(sel_b); +exp_setup_selb_fail: + gpio_free(sel_a); +exp_setup_sela_fail: + return ret; +} + +static int da850_evm_ui_expander_teardown(struct i2c_client *client, + unsigned gpio, unsigned ngpio, void *c) +{ + /* deselect all functionalities */ + gpio_set_value(gpio + 5, 1); + gpio_set_value(gpio + 6, 1); + gpio_set_value(gpio + 7, 1); + + gpio_free(gpio + 5); + gpio_free(gpio + 6); + gpio_free(gpio + 7); + + return 0; +} + +static struct pca953x_platform_data da850_evm_ui_expander_info = { + .gpio_base = DAVINCI_N_GPIO, + .setup = da850_evm_ui_expander_setup, + .teardown = da850_evm_ui_expander_teardown, +}; + static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { { I2C_BOARD_INFO("tlv320aic3x", 0x18), - } + }, + { + I2C_BOARD_INFO("tca6416", 0x20), + .platform_data = &da850_evm_ui_expander_info, + }, }; static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { @@ -158,11 +299,6 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = { .enabled_uarts = 0x7, }; -static struct platform_device *da850_evm_devices[] __initdata = { - &da850_evm_nandflash_device, - &da850_evm_norflash_device, -}; - /* davinci da850 evm audio machine driver */ static u8 da850_iis_serializer_direction[] = { INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, @@ -198,6 +334,8 @@ static struct davinci_mmc_config da850_mmc_config = { .get_ro = da850_evm_mmc_get_ro, .get_cd = da850_evm_mmc_get_cd, .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .version = MMC_CTLR_VERSION_2, }; @@ -233,56 +371,227 @@ static int da850_lcd_hw_init(void) return 0; } -#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 -#define DA8XX_AEMIF_ASIZE_16BIT 0x1 +/* TPS65070 voltage regulator support */ -static void __init da850_evm_init_nor(void) -{ - void __iomem *aemif_addr; +/* 3.3V */ +struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { + { + .supply = "usb0_vdda33", + }, + { + .supply = "usb1_vdda33", + }, +}; - aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); +/* 3.3V or 1.8V */ +struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { + { + .supply = "dvdd3318_a", + }, + { + .supply = "dvdd3318_b", + }, + { + .supply = "dvdd3318_c", + }, +}; - /* Configure data bus width of CS2 to 16 bit */ - writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | - DA8XX_AEMIF_ASIZE_16BIT, - aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); +/* 1.2V */ +struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { + { + .supply = "cvdd", + }, +}; - iounmap(aemif_addr); -} +/* 1.8V LDO */ +struct regulator_consumer_supply tps65070_ldo1_consumers[] = { + { + .supply = "sata_vddr", + }, + { + .supply = "usb0_vdda18", + }, + { + .supply = "usb1_vdda18", + }, + { + .supply = "ddr_dvdd18", + }, +}; -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) -#define HAS_NOR 1 -#else -#define HAS_NOR 0 -#endif +/* 1.2V LDO */ +struct regulator_consumer_supply tps65070_ldo2_consumers[] = { + { + .supply = "sata_vdd", + }, + { + .supply = "pll0_vdda", + }, + { + .supply = "pll1_vdda", + }, + { + .supply = "usbs_cvdd", + }, + { + .supply = "vddarnwa1", + }, +}; -#if defined(CONFIG_MMC_DAVINCI) || \ - defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +struct regulator_init_data tps65070_regulator_data[] = { + /* dcdc1 */ + { + .constraints = { + .min_uV = 3150000, + .max_uV = 3450000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers), + .consumer_supplies = tps65070_dcdc1_consumers, + }, -static __init void da850_evm_init(void) + /* dcdc2 */ + { + .constraints = { + .min_uV = 1710000, + .max_uV = 3450000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers), + .consumer_supplies = tps65070_dcdc2_consumers, + }, + + /* dcdc3 */ + { + .constraints = { + .min_uV = 950000, + .max_uV = 1320000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers), + .consumer_supplies = tps65070_dcdc3_consumers, + }, + + /* ldo1 */ + { + .constraints = { + .min_uV = 1710000, + .max_uV = 1890000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers), + .consumer_supplies = tps65070_ldo1_consumers, + }, + + /* ldo2 */ + { + .constraints = { + .min_uV = 1140000, + .max_uV = 1320000, + .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS), + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers), + .consumer_supplies = tps65070_ldo2_consumers, + }, +}; + +static struct i2c_board_info __initdata da850evm_tps65070_info[] = { + { + I2C_BOARD_INFO("tps6507x", 0x48), + .platform_data = &tps65070_regulator_data[0], + }, +}; + +static int __init pmic_tps65070_init(void) { - struct davinci_soc_info *soc_info = &davinci_soc_info; + return i2c_register_board_info(1, da850evm_tps65070_info, + ARRAY_SIZE(da850evm_tps65070_info)); +} + +static const short da850_evm_lcdc_pins[] = { + DA850_GPIO2_8, DA850_GPIO2_15, + -1 +}; + +static int __init da850_evm_config_emac(void) +{ + void __iomem *cfg_chip3_base; int ret; + u32 val; + struct davinci_soc_info *soc_info = &davinci_soc_info; + u8 rmii_en = soc_info->emac_pdata->rmii_en; + + if (!machine_is_davinci_da850_evm()) + return 0; + + cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG); + + val = __raw_readl(cfg_chip3_base); + + if (rmii_en) { + val |= BIT(8); + ret = da8xx_pinmux_setup(da850_rmii_pins); + pr_info("EMAC: RMII PHY configured, MII PHY will not be" + " functional\n"); + } else { + val &= ~BIT(8); + ret = da8xx_pinmux_setup(da850_cpgmac_pins); + pr_info("EMAC: MII PHY configured, RMII PHY will not be" + " functional\n"); + } - ret = da8xx_pinmux_setup(da850_nand_pins); if (ret) - pr_warning("da850_evm_init: nand mux setup failed: %d\n", + pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n", ret); - ret = da8xx_pinmux_setup(da850_nor_pins); + /* configure the CFGCHIP3 register for RMII or MII */ + __raw_writel(val, cfg_chip3_base); + + ret = davinci_cfg_reg(DA850_GPIO2_6); if (ret) - pr_warning("da850_evm_init: nor mux setup failed: %d\n", + pr_warning("da850_evm_init:GPIO(2,6) mux setup " + "failed\n"); + + ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); + if (ret) { + pr_warning("Cannot open GPIO %d\n", + DA850_MII_MDIO_CLKEN_PIN); + return ret; + } + + /* Enable/Disable MII MDIO clock */ + gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); + + soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; + + ret = da8xx_register_emac(); + if (ret) + pr_warning("da850_evm_init: emac registration failed: %d\n", ret); - da850_evm_init_nor(); + return 0; +} +device_initcall(da850_evm_config_emac); + +static __init void da850_evm_init(void) +{ + int ret; - platform_add_devices(da850_evm_devices, - ARRAY_SIZE(da850_evm_devices)); + ret = pmic_tps65070_init(); + if (ret) + pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n", + ret); ret = da8xx_register_edma(); if (ret) @@ -299,19 +608,6 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: i2c0 registration failed: %d\n", ret); - soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; - soc_info->emac_pdata->rmii_en = 0; - - ret = da8xx_pinmux_setup(da850_cpgmac_pins); - if (ret) - pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n", - ret); - - ret = da8xx_register_emac(); - if (ret) - pr_warning("da850_evm_init: emac registration failed: %d\n", - ret); ret = da8xx_register_watchdog(); if (ret) @@ -319,11 +615,6 @@ static __init void da850_evm_init(void) ret); if (HAS_MMC) { - if (HAS_NOR) - pr_warning("WARNING: both NOR Flash and MMC/SD are " - "enabled, but they share AEMIF pins.\n" - "\tDisable one of them.\n"); - ret = da8xx_pinmux_setup(da850_mmcsd0_pins); if (ret) pr_warning("da850_evm_init: mmcsd0 mux setup failed:" @@ -365,22 +656,42 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", ret); - da8xx_init_mcasp(0, &da850_evm_snd_data); + da8xx_register_mcasp(0, &da850_evm_snd_data); ret = da8xx_pinmux_setup(da850_lcdcntl_pins); if (ret) pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", ret); + /* Handle board specific muxing for LCD here */ + ret = da8xx_pinmux_setup(da850_evm_lcdc_pins); + if (ret) + pr_warning("da850_evm_init: evm specific lcd mux setup " + "failed: %d\n", ret); + ret = da850_lcd_hw_init(); if (ret) pr_warning("da850_evm_init: lcd initialization failed: %d\n", ret); - ret = da8xx_register_lcdc(); + ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); if (ret) pr_warning("da850_evm_init: lcdc registration failed: %d\n", ret); + + ret = da8xx_register_rtc(); + if (ret) + pr_warning("da850_evm_init: rtc setup failed: %d\n", ret); + + ret = da850_register_cpufreq(); + if (ret) + pr_warning("da850_evm_init: cpufreq registration failed: %d\n", + ret); + + ret = da8xx_register_cpuidle(); + if (ret) + pr_warning("da850_evm_init: cpuidle registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 77e806798822..a9b650dcc172 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -9,15 +9,13 @@ * or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/dma-mapping.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> -#include <linux/io.h> #include <linux/gpio.h> #include <linux/clk.h> #include <linux/videodev2.h> @@ -25,20 +23,15 @@ #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> -#include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <mach/hardware.h> #include <mach/dm355.h> -#include <mach/psc.h> -#include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> +#include <mach/usb.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -86,8 +79,9 @@ static struct davinci_nand_pdata davinci_nand_data = { .mask_chipsel = BIT(14), .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), - .ecc_mode = NAND_ECC_HW_SYNDROME, + .ecc_mode = NAND_ECC_HW, .options = NAND_USE_FLASH_BBT, + .ecc_bits = 4, }; static struct resource davinci_nand_resources[] = { @@ -344,7 +338,7 @@ static __init void dm355_evm_init(void) gpio_request(2, "usb_id_toggle"); gpio_direction_output(2, USB_ID_VALUE); /* irlml6401 switches over 1A in under 8 msec */ - setup_usb(500, 8); + davinci_setup_usb(1000, 8); davinci_setup_mmc(0, &dm355evm_mmc_config); davinci_setup_mmc(1, &dm355evm_mmc_config); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 84ad5d161a87..21f32eb41e8c 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -8,34 +8,27 @@ * warranty of any kind, whether express or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/dma-mapping.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> -#include <linux/io.h> #include <linux/gpio.h> #include <linux/clk.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> -#include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <mach/hardware.h> #include <mach/dm355.h> -#include <mach/psc.h> -#include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/nand.h> #include <mach/mmc.h> +#include <mach/usb.h> #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -270,7 +263,7 @@ static __init void dm355_leopard_init(void) gpio_request(2, "usb_id_toggle"); gpio_direction_output(2, USB_ID_VALUE); /* irlml6401 switches over 1A in under 8 msec */ - setup_usb(500, 8); + davinci_setup_usb(1000, 8); davinci_setup_mmc(0, &dm355leopard_mmc_config); davinci_setup_mmc(1, &dm355leopard_mmc_config); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 52dd8046b305..289fe1b7d25a 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -13,9 +13,8 @@ * GNU General Public License for more details. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/dma-mapping.h> +#include <linux/err.h> #include <linux/i2c.h> #include <linux/io.h> #include <linux/clk.h> @@ -24,20 +23,19 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> -#include <asm/setup.h> +#include <linux/input.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> + #include <mach/mux.h> -#include <mach/hardware.h> #include <mach/dm365.h> -#include <mach/psc.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/mmc.h> #include <mach/nand.h> - +#include <mach/keyscan.h> static inline int have_imager(void) { @@ -144,6 +142,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, .options = NAND_USE_FLASH_BBT, + .ecc_bits = 4, }; static struct resource davinci_nand_resources[] = { @@ -176,11 +175,16 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; +static struct snd_platform_data dm365_evm_snd_data; + static struct i2c_board_info i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), .platform_data = &eeprom_info, }, + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + }, }; static struct davinci_i2c_platform_data i2c_pdata = { @@ -188,6 +192,38 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; +#ifdef CONFIG_KEYBOARD_DAVINCI +static unsigned short dm365evm_keymap[] = { + KEY_KP2, + KEY_LEFT, + KEY_EXIT, + KEY_DOWN, + KEY_ENTER, + KEY_UP, + KEY_KP1, + KEY_RIGHT, + KEY_MENU, + KEY_RECORD, + KEY_REWIND, + KEY_KPMINUS, + KEY_STOP, + KEY_FASTFORWARD, + KEY_KPPLUS, + KEY_PLAYPAUSE, + 0 +}; + +static struct davinci_ks_platform_data dm365evm_ks_data = { + .keymap = dm365evm_keymap, + .keymapsize = ARRAY_SIZE(dm365evm_keymap), + .rep = 1, + /* Scan period = strobe + interval */ + .strobe = 0x5, + .interval = 0x2, + .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4, +}; +#endif + static int cpld_mmc_get_cd(int module) { if (!cpld) @@ -472,6 +508,13 @@ static __init void dm365_evm_init(void) /* maybe setup mmc1/etc ... _after_ mmc0 */ evm_init_cpld(); + + dm365_init_asp(&dm365_evm_snd_data); + dm365_init_rtc(); + +#ifdef CONFIG_KEYBOARD_DAVINCI + dm365_init_ks(&dm365evm_ks_data); +#endif } static __init void dm365_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 1213a0087ad4..fd0398bc6db3 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -9,45 +9,34 @@ * or implied. */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/memory.h> - #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> -#include <linux/etherdevice.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <linux/io.h> #include <linux/phy.h> #include <linux/clk.h> #include <linux/videodev2.h> #include <media/tvp514x.h> -#include <asm/setup.h> #include <asm/mach-types.h> - #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> #include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> #include <mach/mux.h> -#include <mach/psc.h> #include <mach/nand.h> #include <mach/mmc.h> -#include <mach/emac.h> +#include <mach/usb.h> #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -477,7 +466,7 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) /* irlml6401 switches over 1A, in under 8 msec; * now it can be managed by nDRV_VBUS ... */ - setup_usb(500, 8); + davinci_setup_usb(1000, 8); return 0; } diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 24e0e13b1492..8d0b0e01c59b 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -17,38 +17,28 @@ **************************************************************************/ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/fs.h> -#include <linux/major.h> -#include <linux/root_dev.h> -#include <linux/dma-mapping.h> -#include <linux/serial.h> -#include <linux/serial_8250.h> #include <linux/leds.h> #include <linux/gpio.h> -#include <linux/io.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/i2c/pcf857x.h> -#include <linux/etherdevice.h> #include <media/tvp514x.h> -#include <asm/setup.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> #include <mach/dm646x.h> #include <mach/common.h> -#include <mach/psc.h> #include <mach/serial.h> #include <mach/i2c.h> -#include <mach/mmc.h> -#include <mach/emac.h> +#include <mach/nand.h> #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) @@ -57,6 +47,11 @@ #define HAS_ATA 0 #endif +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000 + +#define NAND_BLOCK_SIZE SZ_128K + /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) #define DM646X_EVM_ATA_PWD BIT(1) @@ -92,6 +87,63 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; +/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot + * and U-Boot environment this avoids dependency on any particular combination + * of UBL, U-Boot or flashing tools etc. + */ +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL, U-Boot with environment */ + .name = "bootloader", + .offset = MTDPART_OFS_APPEND, + .size = 16 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_cle = 0x80000, + .mask_ale = 0x40000, + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW, + .options = 0, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + /* CPLD Register 0 Client: used for I/O Control */ static int cpld_reg0_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -142,7 +194,7 @@ static struct gpio_led evm_leds[] = { { .name = "DS4", .active_low = 1, }, }; -static __initconst struct gpio_led_platform_data evm_led_data = { +static const struct gpio_led_platform_data evm_led_data = { .num_leds = ARRAY_SIZE(evm_leds), .leds = evm_leds, }; @@ -647,6 +699,8 @@ static __init void evm_init(void) dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); + platform_device_register(&davinci_nand_device); + if (HAS_ATA) dm646x_init_ide(); diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c new file mode 100644 index 000000000000..bd9ca079b69d --- /dev/null +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -0,0 +1,323 @@ +/* + * Neuros Technologies OSD2 board support + * + * Modified from original 644X-EVM board support. + * 2008 (c) Neuros Technology, LLC. + * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com> + * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com> + * + * The Neuros OSD 2.0 is the hardware component of the Neuros Open + * Internet Television Platform. Hardware is very close to TI + * DM644X-EVM board. It has: + * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, + * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. + * Additionaly realtime clock, IR remote control receiver, + * IR Blaster based on MSP430 (firmware although is different + * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive + * with PATA interface, two muxed red-green leds. + * + * For more information please refer to + * http://wiki.neurostechnology.com/index.php/OSD_2.0_HD + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/dm644x.h> +#include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/mux.h> +#include <mach/nand.h> +#include <mach/mmc.h> +#include <mach/usb.h> + +#define NEUROS_OSD2_PHY_MASK 0x2 +#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ + +#define DAVINCI_CFC_ATA_BASE 0x01C66000 + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +#define LXT971_PHY_ID 0x001378e2 +#define LXT971_PHY_MASK 0xfffffff0 + +#define NTOSD2_AUDIOSOC_I2C_ADDR 0x18 +#define NTOSD2_MSP430_I2C_ADDR 0x59 +#define NTOSD2_MSP430_IRQ 2 + +/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA, + * 2048 blocks in the device, 64 pages per block, 2048 bytes per + * page. + */ + +#define NAND_BLOCK_SIZE SZ_128K + +struct mtd_partition davinci_ntosd2_nandflash_partition[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + /* Kernel */ + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + /* File System */ + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* A few blocks at end hold a flash Bad Block Table. */ +}; + +static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { + .parts = davinci_ntosd2_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_ntosd2_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_ntosd2_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_ntosd2_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource), + .resource = davinci_ntosd2_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = 0, +}; + +static struct resource ide_resources[] = { + { + .start = DAVINCI_CFC_ATA_BASE, + .end = DAVINCI_CFC_ATA_BASE + 0x7ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IDE, + .end = IRQ_IDE, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ide_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device ide_dev = { + .name = "palm_bk3710", + .id = -1, + .resource = ide_resources, + .num_resources = ARRAY_SIZE(ide_resources), + .dev = { + .dma_mask = &ide_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct snd_platform_data dm644x_ntosd2_snd_data; + +static struct gpio_led ntosd2_leds[] = { + { .name = "led1_green", .gpio = GPIO(10), }, + { .name = "led1_red", .gpio = GPIO(11), }, + { .name = "led2_green", .gpio = GPIO(12), }, + { .name = "led2_red", .gpio = GPIO(13), }, +}; + +static struct gpio_led_platform_data ntosd2_leds_data = { + .num_leds = ARRAY_SIZE(ntosd2_leds), + .leds = ntosd2_leds, +}; + +static struct platform_device ntosd2_leds_dev = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ntosd2_leds_data, + }, +}; + + +static struct platform_device *davinci_ntosd2_devices[] __initdata = { + &davinci_fb_device, + &ntosd2_leds_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init davinci_ntosd2_map_io(void) +{ + dm644x_init(); +} + +/* + I2C initialization +*/ +static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static struct i2c_board_info __initdata ntosd2_i2c_info[] = { +}; + +static int ntosd2_init_i2c(void) +{ + int status; + + davinci_init_i2c(&ntosd2_i2c_pdata); + status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); + if (status == 0) { + status = gpio_direction_input(NTOSD2_MSP430_IRQ); + if (status == 0) { + status = gpio_to_irq(NTOSD2_MSP430_IRQ); + if (status > 0) { + ntosd2_i2c_info[0].irq = status; + i2c_register_board_info(1, + ntosd2_i2c_info, + ARRAY_SIZE(ntosd2_i2c_info)); + } + } + } + return status; +} + +static struct davinci_mmc_config davinci_ntosd2_mmc_config = { + .wires = 4, + .version = MMC_CTLR_VERSION_1 +}; + + +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 +#endif + +static __init void davinci_ntosd2_init(void) +{ + struct clk *aemif_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + int status; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) + platform_device_register( + &davinci_ntosd2_nandflash_device); + } + + platform_add_devices(davinci_ntosd2_devices, + ARRAY_SIZE(davinci_ntosd2_devices)); + + /* Initialize I2C interface specific for this board */ + status = ntosd2_init_i2c(); + if (status < 0) + pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" + " %d\n", status); + + davinci_serial_init(&uart_config); + dm644x_init_asp(&dm644x_ntosd2_snd_data); + + soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY; + + davinci_setup_usb(1000, 8); + /* + * Mux the pins to be GPIOs, VLYNQEN is already done at startup. + * The AEAWx are five new AEAW pins that can be muxed by separately. + * They are a bitmask for GPIO management. According TI + * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ + * gpio(10,11,12,13) for leds any combination of bits works except + * four last. So we are to reset all five. + */ + davinci_cfg_reg(DM644X_AEAW0); + davinci_cfg_reg(DM644X_AEAW1); + davinci_cfg_reg(DM644X_AEAW2); + davinci_cfg_reg(DM644X_AEAW3); + davinci_cfg_reg(DM644X_AEAW4); + + davinci_setup_mmc(0, &davinci_ntosd2_mmc_config); +} + +static __init void davinci_ntosd2_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(NEUROS_OSD2, "Neuros OSD2") + /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_ntosd2_map_io, + .init_irq = davinci_ntosd2_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_ntosd2_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 7acdfd8ac071..08d373bfcc8a 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -23,35 +23,24 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> -#include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/gpio.h> - #include <linux/i2c.h> #include <linux/i2c/at24.h> -#include <linux/etherdevice.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/io.h> -#include <asm/setup.h> #include <asm/mach-types.h> - #include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/mach/flash.h> #include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> #include <mach/serial.h> -#include <mach/psc.h> #include <mach/mux.h> +#include <mach/usb.h> #define SFFSDR_PHY_MASK (0x2) #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -107,11 +96,6 @@ static struct platform_device davinci_sffsdr_nandflash_device = { .resource = davinci_sffsdr_nandflash_resource, }; -static struct emac_platform_data sffsdr_emac_pdata = { - .phy_mask = SFFSDR_PHY_MASK, - .mdio_max_freq = SFFSDR_MDIO_FREQUENCY, -}; - static struct at24_platform_data eeprom_info = { .byte_len = (64*1024) / 8, .page_size = 32, @@ -164,7 +148,7 @@ static __init void davinci_sffsdr_init(void) davinci_serial_init(&uart_config); soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; - setup_usb(0, 0); /* We support only peripheral mode. */ + davinci_setup_usb(0, 0); /* We support only peripheral mode. */ /* mux VLYNQ pins */ davinci_cfg_reg(DM644X_VLYNQEN); diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 83d54d50b5ea..baece65cb9c0 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -17,8 +17,8 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/platform_device.h> #include <linux/io.h> +#include <linux/delay.h> #include <mach/hardware.h> @@ -42,8 +42,7 @@ static void __clk_enable(struct clk *clk) if (clk->parent) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->psc_ctlr, - clk->lpsc, 1); + davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1); } static void __clk_disable(struct clk *clk) @@ -51,8 +50,7 @@ static void __clk_disable(struct clk *clk) if (WARN_ON(clk->usecount == 0)) return; if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) - davinci_psc_config(psc_domain(clk), clk->psc_ctlr, - clk->lpsc, 0); + davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0); if (clk->parent) __clk_disable(clk->parent); } @@ -99,20 +97,74 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (clk->round_rate) + return clk->round_rate(clk, rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); +/* Propagate rate to children */ +static void propagate_rate(struct clk *root) +{ + struct clk *clk; + + list_for_each_entry(clk, &root->children, childnode) { + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + } +} + int clk_set_rate(struct clk *clk, unsigned long rate) { + unsigned long flags; + int ret = -EINVAL; + if (clk == NULL || IS_ERR(clk)) - return -EINVAL; + return ret; - /* changing the clk rate is not supported */ - return -EINVAL; + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->set_rate) + ret = clk->set_rate(clk, rate); + if (ret == 0) { + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; } EXPORT_SYMBOL(clk_set_rate); +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* Cannot change parent on enabled clock */ + if (WARN_ON(clk->usecount)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + clk->parent = parent; + list_del_init(&clk->childnode); + list_add(&clk->childnode, &clk->parent->children); + mutex_unlock(&clocks_mutex); + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->recalc) + clk->rate = clk->recalc(clk); + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + int clk_register(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) @@ -123,16 +175,24 @@ int clk_register(struct clk *clk) clk->name, clk->parent->name)) return -EINVAL; + INIT_LIST_HEAD(&clk->children); + mutex_lock(&clocks_mutex); list_add_tail(&clk->node, &clocks); + if (clk->parent) + list_add_tail(&clk->childnode, &clk->parent->children); mutex_unlock(&clocks_mutex); /* If rate is already set, use it */ if (clk->rate) return 0; + /* Else, see if there is a way to calculate it */ + if (clk->recalc) + clk->rate = clk->recalc(clk); + /* Otherwise, default to parent rate */ - if (clk->parent) + else if (clk->parent) clk->rate = clk->parent->rate; return 0; @@ -146,6 +206,7 @@ void clk_unregister(struct clk *clk) mutex_lock(&clocks_mutex); list_del(&clk->node); + list_del(&clk->childnode); mutex_unlock(&clocks_mutex); } EXPORT_SYMBOL(clk_unregister); @@ -166,11 +227,11 @@ static int __init clk_disable_unused(void) continue; /* ignore if in Disabled or SwRstDisable states */ - if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc)) + if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc)) continue; pr_info("Clocks: disable unused %s\n", ck->name); - davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0); + davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0); } spin_unlock_irq(&clockfw_lock); @@ -179,50 +240,62 @@ static int __init clk_disable_unused(void) late_initcall(clk_disable_unused); #endif -static void clk_sysclk_recalc(struct clk *clk) +static unsigned long clk_sysclk_recalc(struct clk *clk) { u32 v, plldiv; struct pll_data *pll; + unsigned long rate = clk->rate; /* If this is the PLL base clock, no more calculations needed */ if (clk->pll_data) - return; + return rate; if (WARN_ON(!clk->parent)) - return; + return rate; - clk->rate = clk->parent->rate; + rate = clk->parent->rate; /* Otherwise, the parent must be a PLL */ if (WARN_ON(!clk->parent->pll_data)) - return; + return rate; pll = clk->parent->pll_data; /* If pre-PLL, source clock is before the multiplier and divider(s) */ if (clk->flags & PRE_PLL) - clk->rate = pll->input_rate; + rate = pll->input_rate; if (!clk->div_reg) - return; + return rate; v = __raw_readl(pll->base + clk->div_reg); if (v & PLLDIV_EN) { plldiv = (v & PLLDIV_RATIO_MASK) + 1; if (plldiv) - clk->rate /= plldiv; + rate /= plldiv; } + + return rate; +} + +static unsigned long clk_leafclk_recalc(struct clk *clk) +{ + if (WARN_ON(!clk->parent)) + return clk->rate; + + return clk->parent->rate; } -static void __init clk_pll_init(struct clk *clk) +static unsigned long clk_pllclk_recalc(struct clk *clk) { u32 ctrl, mult = 1, prediv = 1, postdiv = 1; u8 bypass; struct pll_data *pll = clk->pll_data; + unsigned long rate = clk->rate; pll->base = IO_ADDRESS(pll->phys_base); ctrl = __raw_readl(pll->base + PLLCTL); - clk->rate = pll->input_rate = clk->parent->rate; + rate = pll->input_rate = clk->parent->rate; if (ctrl & PLLCTL_PLLEN) { bypass = 0; @@ -255,9 +328,9 @@ static void __init clk_pll_init(struct clk *clk) } if (!bypass) { - clk->rate /= prediv; - clk->rate *= mult; - clk->rate /= postdiv; + rate /= prediv; + rate *= mult; + rate /= postdiv; } pr_debug("PLL%d: input = %lu MHz [ ", @@ -270,8 +343,90 @@ static void __init clk_pll_init(struct clk *clk) pr_debug("* %d ", mult); if (postdiv > 1) pr_debug("/ %d ", postdiv); - pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); + pr_debug("] --> %lu MHz output.\n", rate / 1000000); + + return rate; +} + +/** + * davinci_set_pllrate - set the output rate of a given PLL. + * + * Note: Currently tested to work with OMAP-L138 only. + * + * @pll: pll whose rate needs to be changed. + * @prediv: The pre divider value. Passing 0 disables the pre-divider. + * @pllm: The multiplier value. Passing 0 leads to multiply-by-one. + * @postdiv: The post divider value. Passing 0 disables the post-divider. + */ +int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, + unsigned int mult, unsigned int postdiv) +{ + u32 ctrl; + unsigned int locktime; + + if (pll->base == NULL) + return -EINVAL; + + /* + * PLL lock time required per OMAP-L138 datasheet is + * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm) + * as 4 and OSCIN cycle as 25 MHz. + */ + if (prediv) { + locktime = ((2000 * prediv) / 100); + prediv = (prediv - 1) | PLLDIV_EN; + } else { + locktime = 20; + } + if (postdiv) + postdiv = (postdiv - 1) | PLLDIV_EN; + if (mult) + mult = mult - 1; + + ctrl = __raw_readl(pll->base + PLLCTL); + + /* Switch the PLL to bypass mode */ + ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); + __raw_writel(ctrl, pll->base + PLLCTL); + + /* + * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched + * to bypass mode. Delay of 1us ensures we are good for all > 4MHz + * OSCIN/CLKIN inputs. Typically the input is ~25MHz. + */ + udelay(1); + + /* Reset and enable PLL */ + ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS); + __raw_writel(ctrl, pll->base + PLLCTL); + + if (pll->flags & PLL_HAS_PREDIV) + __raw_writel(prediv, pll->base + PREDIV); + + __raw_writel(mult, pll->base + PLLM); + + if (pll->flags & PLL_HAS_POSTDIV) + __raw_writel(postdiv, pll->base + POSTDIV); + + /* + * Wait for PLL to reset properly, OMAP-L138 datasheet says + * 'min' time = 125ns + */ + udelay(1); + + /* Bring PLL out of reset */ + ctrl |= PLLCTL_PLLRST; + __raw_writel(ctrl, pll->base + PLLCTL); + + udelay(locktime); + + /* Remove PLL from bypass mode */ + ctrl |= PLLCTL_PLLEN; + __raw_writel(ctrl, pll->base + PLLCTL); + + return 0; } +EXPORT_SYMBOL(davinci_set_pllrate); int __init davinci_clk_init(struct davinci_clk *clocks) { @@ -281,12 +436,23 @@ int __init davinci_clk_init(struct davinci_clk *clocks) for (c = clocks; c->lk.clk; c++) { clk = c->lk.clk; - if (clk->pll_data) - clk_pll_init(clk); + if (!clk->recalc) { + + /* Check if clock is a PLL */ + if (clk->pll_data) + clk->recalc = clk_pllclk_recalc; + + /* Else, if it is a PLL-derived clock */ + else if (clk->flags & CLK_PLL) + clk->recalc = clk_sysclk_recalc; + + /* Otherwise, it is a leaf clock (PSC clock) */ + else if (clk->parent) + clk->recalc = clk_leafclk_recalc; + } - /* Calculate rates for PLL-derived clocks */ - else if (clk->flags & CLK_PLL) - clk_sysclk_recalc(clk); + if (clk->recalc) + clk->rate = clk->recalc(clk); if (clk->lpsc) clk->flags |= CLK_PSC; @@ -352,9 +518,8 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) /* REVISIT show device associations too */ /* cost is now small, but not linear... */ - list_for_each_entry(clk, &clocks, node) { - if (clk->parent == parent) - dump_clock(s, nest + NEST_DELTA, clk); + list_for_each_entry(clk, &parent->children, childnode) { + dump_clock(s, nest + NEST_DELTA, clk); } } diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 27233cb4a2fb..c92d77a3008d 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -22,6 +22,10 @@ /* PLL/Reset register offsets */ #define PLLCTL 0x100 #define PLLCTL_PLLEN BIT(0) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLENSRC BIT(5) #define PLLCTL_CLKMODE BIT(8) #define PLLM 0x110 @@ -65,15 +69,20 @@ struct clk { const char *name; unsigned long rate; u8 usecount; - u8 flags; u8 lpsc; - u8 psc_ctlr; + u8 gpsc; + u32 flags; struct clk *parent; + struct list_head children; /* list of children */ + struct list_head childnode; /* parent's child list node */ struct pll_data *pll_data; u32 div_reg; + unsigned long (*recalc) (struct clk *); + int (*set_rate) (struct clk *clk, unsigned long rate); + int (*round_rate) (struct clk *clk, unsigned long rate); }; -/* Clock flags */ +/* Clock flags: SoC-specific flags start at BIT(16) */ #define ALWAYS_ENABLED BIT(1) #define CLK_PSC BIT(2) #define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ @@ -94,6 +103,8 @@ struct davinci_clk { } int davinci_clk_init(struct davinci_clk *clocks); +int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, + unsigned int mult, unsigned int postdiv); extern struct platform_device davinci_wdt_device; diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 61ede19c6b54..c2de94cde56a 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -86,6 +86,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) dip = davinci_get_id(davinci_soc_info.jtag_id); if (!dip) { ret = -EINVAL; + pr_err("Unknown DaVinci JTAG ID 0x%x\n", + davinci_soc_info.jtag_id); goto err; } @@ -104,5 +106,5 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) return; err: - pr_err("davinci_common_init: SoC Initialization failed\n"); + panic("davinci_common_init: SoC Initialization failed\n"); } diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 96c8e97a7deb..52b287cf3a42 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -10,9 +10,6 @@ */ #include <linux/init.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> #include <linux/irq.h> #include <linux/io.h> diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c new file mode 100644 index 000000000000..d3fa6de1e20f --- /dev/null +++ b/arch/arm/mach-davinci/cpufreq.c @@ -0,0 +1,226 @@ +/* + * CPU frequency scaling for DaVinci + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows: + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Updated to support OMAP3 + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/types.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <mach/hardware.h> +#include <mach/cpufreq.h> +#include <mach/common.h> + +#include "clock.h" + +struct davinci_cpufreq { + struct device *dev; + struct clk *armclk; +}; +static struct davinci_cpufreq cpufreq; + +static int davinci_verify_speed(struct cpufreq_policy *policy) +{ + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct cpufreq_frequency_table *freq_table = pdata->freq_table; + struct clk *armclk = cpufreq.armclk; + + if (freq_table) + return cpufreq_frequency_table_verify(policy, freq_table); + + if (policy->cpu) + return -EINVAL; + + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + + policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000; + policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000; + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + return 0; +} + +static unsigned int davinci_getspeed(unsigned int cpu) +{ + if (cpu) + return 0; + + return clk_get_rate(cpufreq.armclk) / 1000; +} + +static int davinci_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + int ret = 0; + unsigned int idx; + struct cpufreq_freqs freqs; + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct clk *armclk = cpufreq.armclk; + + /* + * Ensure desired rate is within allowed range. Some govenors + * (ondemand) will just pass target_freq=0 to get the minimum. + */ + if (target_freq < policy->cpuinfo.min_freq) + target_freq = policy->cpuinfo.min_freq; + if (target_freq > policy->cpuinfo.max_freq) + target_freq = policy->cpuinfo.max_freq; + + freqs.old = davinci_getspeed(0); + freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000; + freqs.cpu = 0; + + if (freqs.old == freqs.new) + return ret; + + cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, + dev_driver_string(cpufreq.dev), + "transition: %u --> %u\n", freqs.old, freqs.new); + + ret = cpufreq_frequency_table_target(policy, pdata->freq_table, + freqs.new, relation, &idx); + if (ret) + return -EINVAL; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* if moving to higher frequency, up the voltage beforehand */ + if (pdata->set_voltage && freqs.new > freqs.old) + pdata->set_voltage(idx); + + ret = clk_set_rate(armclk, idx); + + /* if moving to lower freq, lower the voltage after lowering freq */ + if (pdata->set_voltage && freqs.new < freqs.old) + pdata->set_voltage(idx); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +static int __init davinci_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct cpufreq_frequency_table *freq_table = pdata->freq_table; + + if (policy->cpu != 0) + return -EINVAL; + + /* Finish platform specific initialization */ + if (pdata->init) { + result = pdata->init(); + if (result) + return result; + } + + policy->cur = policy->min = policy->max = davinci_getspeed(0); + + if (freq_table) { + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); + if (!result) + cpufreq_frequency_table_get_attr(freq_table, + policy->cpu); + } else { + policy->cpuinfo.min_freq = policy->min; + policy->cpuinfo.max_freq = policy->max; + } + + policy->min = policy->cpuinfo.min_freq; + policy->max = policy->cpuinfo.max_freq; + policy->cur = davinci_getspeed(0); + + /* + * Time measurement across the target() function yields ~1500-1800us + * time taken with no drivers on notification list. + * Setting the latency to 2000 us to accomodate addition of drivers + * to pre/post change notification list. + */ + policy->cpuinfo.transition_latency = 2000 * 1000; + return 0; +} + +static int davinci_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr *davinci_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver davinci_driver = { + .flags = CPUFREQ_STICKY, + .verify = davinci_verify_speed, + .target = davinci_target, + .get = davinci_getspeed, + .init = davinci_cpu_init, + .exit = davinci_cpu_exit, + .name = "davinci", + .attr = davinci_cpufreq_attr, +}; + +static int __init davinci_cpufreq_probe(struct platform_device *pdev) +{ + struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; + + if (!pdata) + return -EINVAL; + if (!pdata->freq_table) + return -EINVAL; + + cpufreq.dev = &pdev->dev; + + cpufreq.armclk = clk_get(NULL, "arm"); + if (IS_ERR(cpufreq.armclk)) { + dev_err(cpufreq.dev, "Unable to get ARM clock\n"); + return PTR_ERR(cpufreq.armclk); + } + + return cpufreq_register_driver(&davinci_driver); +} + +static int __exit davinci_cpufreq_remove(struct platform_device *pdev) +{ + clk_put(cpufreq.armclk); + + return cpufreq_unregister_driver(&davinci_driver); +} + +static struct platform_driver davinci_cpufreq_driver = { + .driver = { + .name = "cpufreq-davinci", + .owner = THIS_MODULE, + }, + .remove = __exit_p(davinci_cpufreq_remove), +}; + +static int __init davinci_cpufreq_init(void) +{ + return platform_driver_probe(&davinci_cpufreq_driver, + davinci_cpufreq_probe); +} +late_initcall(davinci_cpufreq_init); + diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c new file mode 100644 index 000000000000..97a90f36fc92 --- /dev/null +++ b/arch/arm/mach-davinci/cpuidle.c @@ -0,0 +1,197 @@ +/* + * CPU idle for DaVinci SoCs + * + * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ + * + * Derived from Marvell Kirkwood CPU idle code + * (arch/arm/mach-kirkwood/cpuidle.c) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/cpuidle.h> +#include <linux/io.h> +#include <asm/proc-fns.h> + +#include <mach/cpuidle.h> + +#define DAVINCI_CPUIDLE_MAX_STATES 2 + +struct davinci_ops { + void (*enter) (u32 flags); + void (*exit) (u32 flags); + u32 flags; +}; + +/* fields in davinci_ops.flags */ +#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0) + +static struct cpuidle_driver davinci_idle_driver = { + .name = "cpuidle-davinci", + .owner = THIS_MODULE, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); +static void __iomem *ddr2_reg_base; + +#define DDR2_SDRCR_OFFSET 0xc +#define DDR2_SRPD_BIT BIT(23) +#define DDR2_LPMODEN_BIT BIT(31) + +static void davinci_save_ddr_power(int enter, bool pdown) +{ + u32 val; + + val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET); + + if (enter) { + if (pdown) + val |= DDR2_SRPD_BIT; + else + val &= ~DDR2_SRPD_BIT; + val |= DDR2_LPMODEN_BIT; + } else { + val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT); + } + + __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET); +} + +static void davinci_c2state_enter(u32 flags) +{ + davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); +} + +static void davinci_c2state_exit(u32 flags) +{ + davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); +} + +static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { + [1] = { + .enter = davinci_c2state_enter, + .exit = davinci_c2state_exit, + }, +}; + +/* Actual code that puts the SoC in different idle states */ +static int davinci_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct davinci_ops *ops = cpuidle_get_statedata(state); + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + if (ops && ops->enter) + ops->enter(ops->flags); + /* Wait for interrupt state */ + cpu_do_idle(); + if (ops && ops->exit) + ops->exit(ops->flags); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + return idle_time; +} + +static int __init davinci_cpuidle_probe(struct platform_device *pdev) +{ + int ret; + struct cpuidle_device *device; + struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; + struct resource *ddr2_regs; + resource_size_t len; + + device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); + + if (!pdata) { + dev_err(&pdev->dev, "cannot get platform data\n"); + return -ENOENT; + } + + ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!ddr2_regs) { + dev_err(&pdev->dev, "cannot get DDR2 controller register base"); + return -ENODEV; + } + + len = resource_size(ddr2_regs); + + ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name); + if (!ddr2_regs) + return -EBUSY; + + ddr2_reg_base = ioremap(ddr2_regs->start, len); + if (!ddr2_reg_base) { + ret = -ENOMEM; + goto ioremap_fail; + } + + ret = cpuidle_register_driver(&davinci_idle_driver); + if (ret) { + dev_err(&pdev->dev, "failed to register driver\n"); + goto driver_register_fail; + } + + /* Wait for interrupt state */ + device->states[0].enter = davinci_enter_idle; + device->states[0].exit_latency = 1; + device->states[0].target_residency = 10000; + device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[0].name, "WFI"); + strcpy(device->states[0].desc, "Wait for interrupt"); + + /* Wait for interrupt and DDR self refresh state */ + device->states[1].enter = davinci_enter_idle; + device->states[1].exit_latency = 10; + device->states[1].target_residency = 10000; + device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(device->states[1].name, "DDR SR"); + strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + if (pdata->ddr2_pdown) + davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; + cpuidle_set_statedata(&device->states[1], &davinci_states[1]); + + device->state_count = DAVINCI_CPUIDLE_MAX_STATES; + + ret = cpuidle_register_device(device); + if (ret) { + dev_err(&pdev->dev, "failed to register device\n"); + goto device_register_fail; + } + + return 0; + +device_register_fail: + cpuidle_unregister_driver(&davinci_idle_driver); +driver_register_fail: + iounmap(ddr2_reg_base); +ioremap_fail: + release_mem_region(ddr2_regs->start, len); + return ret; +} + +static struct platform_driver davinci_cpuidle_driver = { + .driver = { + .name = "cpuidle-davinci", + .owner = THIS_MODULE, + }, +}; + +static int __init davinci_cpuidle_init(void) +{ + return platform_driver_probe(&davinci_cpuidle_driver, + davinci_cpuidle_probe); +} +device_initcall(davinci_cpuidle_init); + diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 19b2748357fc..b22b5cf04250 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -8,22 +8,17 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> -#include <linux/platform_device.h> #include <asm/mach/map.h> -#include <mach/clock.h> #include <mach/psc.h> -#include <mach/mux.h> #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/asp.h> #include "clock.h" #include "mux.h" @@ -193,14 +188,14 @@ static struct clk uart1_clk = { .name = "uart1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_UART1, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk uart2_clk = { .name = "uart2", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_UART2, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk spi0_clk = { @@ -213,98 +208,98 @@ static struct clk spi1_clk = { .name = "spi1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_SPI1, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk ecap0_clk = { .name = "ecap0", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_ECAP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk ecap1_clk = { .name = "ecap1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_ECAP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk ecap2_clk = { .name = "ecap2", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_ECAP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk pwm0_clk = { .name = "pwm0", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_PWM, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk pwm1_clk = { .name = "pwm1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_PWM, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk pwm2_clk = { .name = "pwm2", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_PWM, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk eqep0_clk = { .name = "eqep0", .parent = &pll0_sysclk2, .lpsc = DA830_LPSC1_EQEP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk eqep1_clk = { .name = "eqep1", .parent = &pll0_sysclk2, .lpsc = DA830_LPSC1_EQEP, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk lcdc_clk = { .name = "lcdc", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_LCDC, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mcasp0_clk = { .name = "mcasp0", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_McASP0, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mcasp1_clk = { .name = "mcasp1", .parent = &pll0_sysclk2, .lpsc = DA830_LPSC1_McASP1, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mcasp2_clk = { .name = "mcasp2", .parent = &pll0_sysclk2, .lpsc = DA830_LPSC1_McASP2, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk usb20_clk = { .name = "usb20", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_USB20, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk aemif_clk = { @@ -332,36 +327,36 @@ static struct clk emac_clk = { .name = "emac", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_CPGMAC, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk gpio_clk = { .name = "gpio", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_GPIO, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk i2c1_clk = { .name = "i2c1", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_I2C, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk usb11_clk = { .name = "usb11", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_USB11, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk emif3_clk = { .name = "emif3", .parent = &pll0_sysclk5, .lpsc = DA8XX_LPSC1_EMIF3C, + .gpsc = 1, .flags = ALWAYS_ENABLED, - .psc_ctlr = 1, }; static struct clk arm_clk = { @@ -411,7 +406,7 @@ static struct davinci_clk da830_clks[] = { CLK(NULL, "pwm2", &pwm2_clk), CLK("eqep.0", NULL, &eqep0_clk), CLK("eqep.1", NULL, &eqep1_clk), - CLK("da830_lcdc", NULL, &lcdc_clk), + CLK("da8xx_lcdc.0", NULL, &lcdc_clk), CLK("davinci-mcasp.0", NULL, &mcasp0_clk), CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK("davinci-mcasp.2", NULL, &mcasp2_clk), @@ -1143,7 +1138,21 @@ static struct davinci_id da830_ids[] = { .part_no = 0xb7df, .manufacturer = 0x017, /* 0x02f >> 1 */ .cpu_id = DAVINCI_CPU_ID_DA830, - .name = "da830/omap l137", + .name = "da830/omap-l137 rev1.0", + }, + { + .variant = 0x8, + .part_no = 0xb7df, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DA830, + .name = "da830/omap-l137 rev1.1", + }, + { + .variant = 0x9, + .part_no = 0xb7df, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DA830, + .name = "da830/omap-l137 rev2.0", }, }; @@ -1178,13 +1187,11 @@ static struct davinci_timer_info da830_timer_info = { static struct davinci_soc_info davinci_soc_info_da830 = { .io_desc = da830_io_desc, .io_desc_num = ARRAY_SIZE(da830_io_desc), - .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG), .ids = da830_ids, .ids_num = ARRAY_SIZE(da830_ids), .cpu_clks = da830_clks, .psc_bases = da830_psc_bases, .psc_bases_num = ARRAY_SIZE(da830_psc_bases), - .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120), .pinmux_pins = da830_pins, .pinmux_pins_num = ARRAY_SIZE(da830_pins), .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, @@ -1201,5 +1208,13 @@ static struct davinci_soc_info davinci_soc_info_da830 = { void __init da830_init(void) { + da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K); + if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module")) + return; + + davinci_soc_info_da830.jtag_id_base = + DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG); + davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120); + davinci_common_init(&davinci_soc_info_da830); } diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 192d719a47df..717806c6cef9 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -11,31 +11,41 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/cpufreq.h> +#include <linux/regulator/consumer.h> #include <asm/mach/map.h> -#include <mach/clock.h> #include <mach/psc.h> -#include <mach/mux.h> #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> +#include <mach/cpufreq.h> #include "clock.h" #include "mux.h" +/* SoC specific clock flags */ +#define DA850_CLK_ASYNC3 BIT(16) + #define DA850_PLL1_BASE 0x01e1a000 #define DA850_TIMER64P2_BASE 0x01f0c000 #define DA850_TIMER64P3_BASE 0x01f0d000 #define DA850_REF_FREQ 24000000 +#define CFGCHIP3_ASYNC3_CLKSRC BIT(4) +#define CFGCHIP0_PLL_MASTER_LOCK BIT(4) + +static int da850_set_armrate(struct clk *clk, unsigned long rate); +static int da850_round_armrate(struct clk *clk, unsigned long rate); +static int da850_set_pll0rate(struct clk *clk, unsigned long armrate); + static struct pll_data pll0_data = { .num = 1, .phys_base = DA8XX_PLL0_BASE, @@ -52,6 +62,7 @@ static struct clk pll0_clk = { .parent = &ref_clk, .pll_data = &pll0_data, .flags = CLK_PLL, + .set_rate = da850_set_pll0rate, }; static struct clk pll0_aux_clk = { @@ -210,16 +221,16 @@ static struct clk tpcc1_clk = { .name = "tpcc1", .parent = &pll0_sysclk2, .lpsc = DA850_LPSC1_TPCC1, + .gpsc = 1, .flags = CLK_PSC | ALWAYS_ENABLED, - .psc_ctlr = 1, }; static struct clk tptc2_clk = { .name = "tptc2", .parent = &pll0_sysclk2, .lpsc = DA850_LPSC1_TPTC2, + .gpsc = 1, .flags = ALWAYS_ENABLED, - .psc_ctlr = 1, }; static struct clk uart0_clk = { @@ -232,14 +243,16 @@ static struct clk uart1_clk = { .name = "uart1", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_UART1, - .psc_ctlr = 1, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, }; static struct clk uart2_clk = { .name = "uart2", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_UART2, - .psc_ctlr = 1, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, }; static struct clk aintc_clk = { @@ -253,22 +266,22 @@ static struct clk gpio_clk = { .name = "gpio", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_GPIO, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk i2c1_clk = { .name = "i2c1", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_I2C, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk emif3_clk = { .name = "emif3", .parent = &pll0_sysclk5, .lpsc = DA8XX_LPSC1_EMIF3C, + .gpsc = 1, .flags = ALWAYS_ENABLED, - .psc_ctlr = 1, }; static struct clk arm_clk = { @@ -276,6 +289,8 @@ static struct clk arm_clk = { .parent = &pll0_sysclk6, .lpsc = DA8XX_LPSC0_ARM, .flags = ALWAYS_ENABLED, + .set_rate = da850_set_armrate, + .round_rate = da850_round_armrate, }; static struct clk rmii_clk = { @@ -287,21 +302,22 @@ static struct clk emac_clk = { .name = "emac", .parent = &pll0_sysclk4, .lpsc = DA8XX_LPSC1_CPGMAC, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mcasp_clk = { .name = "mcasp", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_McASP0, - .psc_ctlr = 1, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, }; static struct clk lcdc_clk = { .name = "lcdc", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC1_LCDC, - .psc_ctlr = 1, + .gpsc = 1, }; static struct clk mmcsd_clk = { @@ -404,6 +420,14 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false) MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false) MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false) + MUX_CFG(DA850, RMII_TXD_0, 14, 12, 15, 8, false) + MUX_CFG(DA850, RMII_TXD_1, 14, 8, 15, 8, false) + MUX_CFG(DA850, RMII_TXEN, 14, 16, 15, 8, false) + MUX_CFG(DA850, RMII_CRS_DV, 15, 4, 15, 8, false) + MUX_CFG(DA850, RMII_RXD_0, 14, 24, 15, 8, false) + MUX_CFG(DA850, RMII_RXD_1, 14, 20, 15, 8, false) + MUX_CFG(DA850, RMII_RXER, 14, 28, 15, 8, false) + MUX_CFG(DA850, RMII_MHZ_50_CLK, 15, 0, 15, 0, false) /* McASP function */ MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false) MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false) @@ -506,8 +530,9 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false) MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false) /* GPIO function */ + MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false) + MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false) MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) - MUX_CFG(DA850, GPIO8_10, 18, 28, 15, 8, false) MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false) #endif @@ -547,6 +572,14 @@ const short da850_cpgmac_pins[] __initdata = { -1 }; +const short da850_rmii_pins[] __initdata = { + DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, + DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + const short da850_mcasp_pins[] __initdata = { DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, @@ -555,12 +588,11 @@ const short da850_mcasp_pins[] __initdata = { }; const short da850_lcdcntl_pins[] __initdata = { - DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, - DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8, - DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12, - DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK, - DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15, - DA850_GPIO8_10, + DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, + DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, + DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, + DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, + DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, -1 }; @@ -790,16 +822,221 @@ static struct davinci_timer_info da850_timer_info = { .clocksource_id = T0_TOP, }; +static void da850_set_async3_src(int pllnum) +{ + struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2; + struct davinci_clk *c; + unsigned int v; + int ret; + + for (c = da850_clks; c->lk.clk; c++) { + clk = c->lk.clk; + if (clk->flags & DA850_CLK_ASYNC3) { + ret = clk_set_parent(clk, newparent); + WARN(ret, "DA850: unable to re-parent clock %s", + clk->name); + } + } + + v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG)); + if (pllnum) + v |= CFGCHIP3_ASYNC3_CLKSRC; + else + v &= ~CFGCHIP3_ASYNC3_CLKSRC; + __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG)); +} + +#ifdef CONFIG_CPU_FREQ +/* + * Notes: + * According to the TRM, minimum PLLM results in maximum power savings. + * The OPP definitions below should keep the PLLM as low as possible. + * + * The output of the PLLM must be between 400 to 600 MHz. + * This rules out prediv of anything but divide-by-one for 24Mhz OSC input. + */ +struct da850_opp { + unsigned int freq; /* in KHz */ + unsigned int prediv; + unsigned int mult; + unsigned int postdiv; + unsigned int cvdd_min; /* in uV */ + unsigned int cvdd_max; /* in uV */ +}; + +static const struct da850_opp da850_opp_300 = { + .freq = 300000, + .prediv = 1, + .mult = 25, + .postdiv = 2, + .cvdd_min = 1140000, + .cvdd_max = 1320000, +}; + +static const struct da850_opp da850_opp_200 = { + .freq = 200000, + .prediv = 1, + .mult = 25, + .postdiv = 3, + .cvdd_min = 1050000, + .cvdd_max = 1160000, +}; + +static const struct da850_opp da850_opp_96 = { + .freq = 96000, + .prediv = 1, + .mult = 20, + .postdiv = 5, + .cvdd_min = 950000, + .cvdd_max = 1050000, +}; + +#define OPP(freq) \ + { \ + .index = (unsigned int) &da850_opp_##freq, \ + .frequency = freq * 1000, \ + } + +static struct cpufreq_frequency_table da850_freq_table[] = { + OPP(300), + OPP(200), + OPP(96), + { + .index = 0, + .frequency = CPUFREQ_TABLE_END, + }, +}; + +#ifdef CONFIG_REGULATOR +static struct regulator *cvdd; + +static int da850_set_voltage(unsigned int index) +{ + struct da850_opp *opp; + + if (!cvdd) + return -ENODEV; + + opp = (struct da850_opp *) da850_freq_table[index].index; + + return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max); +} + +static int da850_regulator_init(void) +{ + cvdd = regulator_get(NULL, "cvdd"); + if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;" + " voltage scaling unsupported\n")) { + return PTR_ERR(cvdd); + } + + return 0; +} +#endif + +static struct davinci_cpufreq_config cpufreq_info = { + .freq_table = &da850_freq_table[0], +#ifdef CONFIG_REGULATOR + .init = da850_regulator_init, + .set_voltage = da850_set_voltage, +#endif +}; + +static struct platform_device da850_cpufreq_device = { + .name = "cpufreq-davinci", + .dev = { + .platform_data = &cpufreq_info, + }, +}; + +int __init da850_register_cpufreq(void) +{ + return platform_device_register(&da850_cpufreq_device); +} + +static int da850_round_armrate(struct clk *clk, unsigned long rate) +{ + int i, ret = 0, diff; + unsigned int best = (unsigned int) -1; + + rate /= 1000; /* convert to kHz */ + + for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { + diff = da850_freq_table[i].frequency - rate; + if (diff < 0) + diff = -diff; + + if (diff < best) { + best = diff; + ret = da850_freq_table[i].frequency; + } + } + + return ret * 1000; +} + +static int da850_set_armrate(struct clk *clk, unsigned long index) +{ + struct clk *pllclk = &pll0_clk; + + return clk_set_rate(pllclk, index); +} + +static int da850_set_pll0rate(struct clk *clk, unsigned long index) +{ + unsigned int prediv, mult, postdiv; + struct da850_opp *opp; + struct pll_data *pll = clk->pll_data; + unsigned int v; + int ret; + + opp = (struct da850_opp *) da850_freq_table[index].index; + prediv = opp->prediv; + mult = opp->mult; + postdiv = opp->postdiv; + + /* Unlock writing to PLL registers */ + v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG)); + v &= ~CFGCHIP0_PLL_MASTER_LOCK; + __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG)); + + ret = davinci_set_pllrate(pll, prediv, mult, postdiv); + if (WARN_ON(ret)) + return ret; + + return 0; +} +#else +int __init da850_register_cpufreq(void) +{ + return 0; +} + +static int da850_set_armrate(struct clk *clk, unsigned long rate) +{ + return -EINVAL; +} + +static int da850_set_pll0rate(struct clk *clk, unsigned long armrate) +{ + return -EINVAL; +} + +static int da850_round_armrate(struct clk *clk, unsigned long rate) +{ + return clk->rate; +} +#endif + + static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), - .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG), .ids = da850_ids, .ids_num = ARRAY_SIZE(da850_ids), .cpu_clks = da850_clks, .psc_bases = da850_psc_bases, .psc_bases_num = ARRAY_SIZE(da850_psc_bases), - .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120), .pinmux_pins = da850_pins, .pinmux_pins_num = ARRAY_SIZE(da850_pins), .intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT, @@ -816,5 +1053,22 @@ static struct davinci_soc_info davinci_soc_info_da850 = { void __init da850_init(void) { + da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K); + if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module")) + return; + + davinci_soc_info_da850.jtag_id_base = + DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG); + davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120); + davinci_common_init(&davinci_soc_info_da850); + + /* + * Move the clock source of Async3 domain to PLL1 SYSCLK2. + * This helps keeping the peripherals on this domain insulated + * from CPU frequency changes caused by DVFS. The firmware sets + * both PLL0 and PLL1 to the same frequency so, there should not + * be any noticible change even in non-DVFS use cases. + */ + da850_set_async3_src(1); } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 58ad5b66fd60..dd2d32c4ce86 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -10,8 +10,6 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> @@ -21,7 +19,7 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <video/da8xx-fb.h> +#include <mach/cpuidle.h> #include "clock.h" @@ -30,6 +28,7 @@ #define DA8XX_TPTC1_BASE 0x01c08400 #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 +#define DA8XX_RTC_BASE 0x01C23000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 @@ -43,6 +42,8 @@ #define DA8XX_MDIO_REG_OFFSET 0x4000 #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K +void __iomem *da8xx_syscfg_base; + static struct plat_serial8250_port da8xx_serial_pdata[] = { { .mapbase = DA8XX_UART0_BASE, @@ -282,6 +283,11 @@ static struct platform_device da8xx_emac_device = { .resource = da8xx_emac_resources, }; +int __init da8xx_register_emac(void) +{ + return platform_device_register(&da8xx_emac_device); +} + static struct resource da830_mcasp1_resources[] = { { .name = "mcasp1", @@ -338,12 +344,7 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -int __init da8xx_register_emac(void) -{ - return platform_device_register(&da8xx_emac_device); -} - -void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata) +void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { /* DA830/OMAP-L137 has 3 instances of McASP */ if (cpu_is_davinci_da830() && id == 1) { @@ -379,10 +380,16 @@ static struct lcd_ctrl_config lcd_cfg = { .raster_order = 0, }; -static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = { - .manu_name = "sharp", - .controller_data = &lcd_cfg, - .type = "Sharp_LK043T1DG01", +struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = { + .manu_name = "sharp", + .controller_data = &lcd_cfg, + .type = "Sharp_LCD035Q3DG01", +}; + +struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = { + .manu_name = "sharp", + .controller_data = &lcd_cfg, + .type = "Sharp_LK043T1DG01", }; static struct resource da8xx_lcdc_resources[] = { @@ -398,19 +405,17 @@ static struct resource da8xx_lcdc_resources[] = { }, }; -static struct platform_device da850_lcdc_device = { +static struct platform_device da8xx_lcdc_device = { .name = "da8xx_lcdc", .id = 0, .num_resources = ARRAY_SIZE(da8xx_lcdc_resources), .resource = da8xx_lcdc_resources, - .dev = { - .platform_data = &da850_evm_lcdc_pdata, - } }; -int __init da8xx_register_lcdc(void) +int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata) { - return platform_device_register(&da850_lcdc_device); + da8xx_lcdc_device.dev.platform_data = pdata; + return platform_device_register(&da8xx_lcdc_device); } static struct resource da8xx_mmcsd0_resources[] = { @@ -448,3 +453,66 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config) da8xx_mmcsd0_device.dev.platform_data = config; return platform_device_register(&da8xx_mmcsd0_device); } + +static struct resource da8xx_rtc_resources[] = { + { + .start = DA8XX_RTC_BASE, + .end = DA8XX_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* timer irq */ + .start = IRQ_DA8XX_RTC, + .end = IRQ_DA8XX_RTC, + .flags = IORESOURCE_IRQ, + }, + { /* alarm irq */ + .start = IRQ_DA8XX_RTC, + .end = IRQ_DA8XX_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_rtc_device = { + .name = "omap_rtc", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_rtc_resources), + .resource = da8xx_rtc_resources, +}; + +int da8xx_register_rtc(void) +{ + /* Unlock the rtc's registers */ + __raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c)); + __raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70)); + + return platform_device_register(&da8xx_rtc_device); +} + +static struct resource da8xx_cpuidle_resources[] = { + { + .start = DA8XX_DDR2_CTL_BASE, + .end = DA8XX_DDR2_CTL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +/* DA8XX devices support DDR2 power down */ +static struct davinci_cpuidle_config da8xx_cpuidle_pdata = { + .ddr2_pdown = 1, +}; + + +static struct platform_device da8xx_cpuidle_device = { + .name = "cpuidle-davinci", + .num_resources = ARRAY_SIZE(da8xx_cpuidle_resources), + .resource = da8xx_cpuidle_resources, + .dev = { + .platform_data = &da8xx_cpuidle_pdata, + }, +}; + +int __init da8xx_register_cpuidle(void) +{ + return platform_device_register(&da8xx_cpuidle_device); +} + diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index a55b650db71e..147949650c25 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -9,15 +9,11 @@ * (at your option) any later version. */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/io.h> -#include <asm/mach/map.h> - #include <mach/hardware.h> #include <mach/i2c.h> #include <mach/irqs.h> @@ -177,7 +173,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd1_resources[0].start = DM365_MMCSD1_BASE; mmcsd1_resources[0].end = DM365_MMCSD1_BASE + SZ_4K - 1; - mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1; + mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1; } else break; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 059670018aff..dedf4d4f3a27 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -8,7 +8,6 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -21,7 +20,6 @@ #include <asm/mach/map.h> #include <mach/dm355.h> -#include <mach/clock.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/psc.h> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index e81517434703..2ec619ec1657 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -12,7 +12,6 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -23,7 +22,6 @@ #include <asm/mach/map.h> #include <mach/dm365.h> -#include <mach/clock.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/psc.h> @@ -32,6 +30,8 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> +#include <mach/asp.h> +#include <mach/keyscan.h> #include "clock.h" #include "mux.h" @@ -369,7 +369,7 @@ static struct clk timer3_clk = { static struct clk usb_clk = { .name = "usb", - .parent = &pll2_sysclk1, + .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_USB, }; @@ -456,7 +456,7 @@ static struct davinci_clk dm365_clks[] = { CLK(NULL, "usb", &usb_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK("voice_codec", NULL, &voicecodec_clk), - CLK("soc-audio.0", NULL, &asp0_clk), + CLK("davinci-asp.0", NULL, &asp0_clk), CLK(NULL, "rto", &rto_clk), CLK(NULL, "mjcp", &mjcp_clk), CLK(NULL, NULL, NULL), @@ -531,7 +531,7 @@ MUX_CFG(DM365, EMAC_CRS, 3, 2, 1, 1, false) MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false) MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false) -MUX_CFG(DM365, KEYPAD, 2, 0, 0x3f, 0x3f, false) +MUX_CFG(DM365, KEYSCAN, 2, 0, 0x3f, 0x3f, false) MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false) MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false) @@ -603,6 +603,9 @@ INT_CFG(DM365, INT_IMX1_ENABLE, 24, 1, 1, false) INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false) INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false) INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false) + +EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false) +EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false) #endif }; @@ -696,6 +699,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_I2C] = 3, [IRQ_UARTINT0] = 3, [IRQ_UARTINT1] = 3, + [IRQ_DM365_RTCINT] = 3, [IRQ_DM365_SPIINT0_0] = 3, [IRQ_DM365_SPIINT3_0] = 3, [IRQ_DM365_GPIO0] = 3, @@ -806,6 +810,50 @@ static struct platform_device dm365_edma_device = { .resource = edma_resources, }; +static struct resource dm365_asp_resources[] = { + { + .start = DAVINCI_DM365_ASP0_BASE, + .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = DAVINCI_DMA_ASP0_TX, + .end = DAVINCI_DMA_ASP0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = DAVINCI_DMA_ASP0_RX, + .end = DAVINCI_DMA_ASP0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device dm365_asp_device = { + .name = "davinci-asp", + .id = 0, + .num_resources = ARRAY_SIZE(dm365_asp_resources), + .resource = dm365_asp_resources, +}; + +static struct resource dm365_rtc_resources[] = { + { + .start = DM365_RTC_BASE, + .end = DM365_RTC_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM365_RTCINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm365_rtc_device = { + .name = "rtc_davinci", + .id = 0, + .num_resources = ARRAY_SIZE(dm365_rtc_resources), + .resource = dm365_rtc_resources, +}; + static struct map_desc dm365_io_desc[] = { { .virtual = IO_VIRT, @@ -822,6 +870,28 @@ static struct map_desc dm365_io_desc[] = { }, }; +static struct resource dm365_ks_resources[] = { + { + /* registers */ + .start = DM365_KEYSCAN_BASE, + .end = DM365_KEYSCAN_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + /* interrupt */ + .start = IRQ_DM365_KEYINT, + .end = IRQ_DM365_KEYINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm365_ks_device = { + .name = "davinci_keyscan", + .id = 0, + .num_resources = ARRAY_SIZE(dm365_ks_resources), + .resource = dm365_ks_resources, +}; + /* Contents of JTAG ID register used to identify exact cpu type */ static struct davinci_id dm365_ids[] = { { @@ -907,6 +977,33 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .sram_len = SZ_32K, }; +void __init dm365_init_asp(struct snd_platform_data *pdata) +{ + davinci_cfg_reg(DM365_MCBSP0_BDX); + davinci_cfg_reg(DM365_MCBSP0_X); + davinci_cfg_reg(DM365_MCBSP0_BFSX); + davinci_cfg_reg(DM365_MCBSP0_BDR); + davinci_cfg_reg(DM365_MCBSP0_R); + davinci_cfg_reg(DM365_MCBSP0_BFSR); + davinci_cfg_reg(DM365_EVT2_ASP_TX); + davinci_cfg_reg(DM365_EVT3_ASP_RX); + dm365_asp_device.dev.platform_data = pdata; + platform_device_register(&dm365_asp_device); +} + +void __init dm365_init_ks(struct davinci_ks_platform_data *pdata) +{ + davinci_cfg_reg(DM365_KEYSCAN); + dm365_ks_device.dev.platform_data = pdata; + platform_device_register(&dm365_ks_device); +} + +void __init dm365_init_rtc(void) +{ + davinci_cfg_reg(DM365_INT_PRTCSS); + platform_device_register(&dm365_rtc_device); +} + void __init dm365_init(void) { davinci_common_init(&davinci_soc_info_dm365); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d6e0fa5a8d8a..2cd008156dea 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -8,7 +8,6 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -18,7 +17,6 @@ #include <asm/mach/map.h> #include <mach/dm644x.h> -#include <mach/clock.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/irqs.h> @@ -370,6 +368,11 @@ MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) +MUX_CFG(DM644X, AEAW0, 0, 0, 1, 0, true) +MUX_CFG(DM644X, AEAW1, 0, 1, 1, 0, true) +MUX_CFG(DM644X, AEAW2, 0, 2, 1, 0, true) +MUX_CFG(DM644X, AEAW3, 0, 3, 1, 0, true) +MUX_CFG(DM644X, AEAW4, 0, 4, 1, 0, true) MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0976049c7b3b..829a44bcf799 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -8,7 +8,6 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -18,7 +17,6 @@ #include <asm/mach/map.h> #include <mach/dm646x.h> -#include <mach/clock.h> #include <mach/cputype.h> #include <mach/edma.h> #include <mach/irqs.h> @@ -789,7 +787,14 @@ static struct davinci_id dm646x_ids[] = { .part_no = 0xb770, .manufacturer = 0x017, .cpu_id = DAVINCI_CPU_ID_DM6467, - .name = "dm6467", + .name = "dm6467_rev1.x", + }, + { + .variant = 0x1, + .part_no = 0xb770, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6467, + .name = "dm6467_rev3.x", }, }; diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index f2e57d272958..648fbb760ae1 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -18,22 +18,13 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/compiler.h> #include <linux/io.h> -#include <mach/cputype.h> -#include <mach/memory.h> -#include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/edma.h> -#include <mach/mux.h> - /* Offsets matching "struct edmacc_param" */ #define PARM_OPT 0x00 @@ -509,43 +500,59 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data) return IRQ_HANDLED; } -static int reserve_contiguous_params(int ctlr, unsigned int id, - unsigned int num_params, - unsigned int start_param) +static int reserve_contiguous_slots(int ctlr, unsigned int id, + unsigned int num_slots, + unsigned int start_slot) { int i, j; - unsigned int count = num_params; + unsigned int count = num_slots; + int stop_slot = start_slot; + DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY); - for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) { + for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) { j = EDMA_CHAN_SLOT(i); - if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) + if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) { + /* Record our current beginning slot */ + if (count == num_slots) + stop_slot = i; + count--; + set_bit(j, tmp_inuse); + if (count == 0) break; - else if (id == EDMA_CONT_PARAMS_FIXED_EXACT) - break; - else - count = num_params; + } else { + clear_bit(j, tmp_inuse); + + if (id == EDMA_CONT_PARAMS_FIXED_EXACT) { + stop_slot = i; + break; + } else + count = num_slots; + } } /* * We have to clear any bits that we set - * if we run out parameter RAMs, i.e we do find a set - * of contiguous parameter RAMs but do not find the exact number - * requested as we may reach the total number of parameter RAMs + * if we run out parameter RAM slots, i.e we do find a set + * of contiguous parameter RAM slots but do not find the exact number + * requested as we may reach the total number of parameter RAM slots */ - if (count) { - for (j = i - num_params + count + 1; j <= i ; ++j) + if (i == edma_info[ctlr]->num_slots) + stop_slot = i; + + for (j = start_slot; j < stop_slot; j++) + if (test_bit(j, tmp_inuse)) clear_bit(j, edma_info[ctlr]->edma_inuse); + if (count) return -EBUSY; - } - for (j = i - num_params + 1; j <= i; ++j) + for (j = i - num_slots + 1; j <= i; ++j) memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j), &dummy_paramset, PARM_SIZE); - return EDMA_CTLR_CHAN(ctlr, i - num_params + 1); + return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1); } /*-----------------------------------------------------------------------*/ @@ -743,26 +750,27 @@ EXPORT_SYMBOL(edma_free_slot); /** * edma_alloc_cont_slots- alloc contiguous parameter RAM slots * The API will return the starting point of a set of - * contiguous PARAM's that have been requested + * contiguous parameter RAM slots that have been requested * * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT - * @count: number of contiguous Paramter RAM's - * @param - the start value of Parameter RAM that should be passed if id + * @count: number of contiguous Paramter RAM slots + * @slot - the start value of Parameter RAM slot that should be passed if id * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT * * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of - * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs - * and 32 in the case of Primus + * contiguous Parameter RAM slots from parameter RAM 64 in the case of + * DaVinci SOCs and 32 in the case of DA8xx SOCs. * * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a - * set of contiguous parameter RAMs from the "param" that is passed as an + * set of contiguous parameter RAM slots from the "slot" that is passed as an * argument to the API. * * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries - * starts looking for a set of contiguous parameter RAMs from the "param" + * starts looking for a set of contiguous parameter RAMs from the "slot" * that is passed as an argument to the API. On failure the API will try to - * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs + * find a set of contiguous Parameter RAM slots from the remaining Parameter + * RAM slots */ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) { @@ -771,12 +779,13 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) * the number of channels and lesser than the total number * of slots */ - if (slot < edma_info[ctlr]->num_channels || - slot >= edma_info[ctlr]->num_slots) + if ((id != EDMA_CONT_PARAMS_ANY) && + (slot < edma_info[ctlr]->num_channels || + slot >= edma_info[ctlr]->num_slots)) return -EINVAL; /* - * The number of parameter RAMs requested cannot be less than 1 + * The number of parameter RAM slots requested cannot be less than 1 * and cannot be more than the number of slots minus the number of * channels */ @@ -786,11 +795,11 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) switch (id) { case EDMA_CONT_PARAMS_ANY: - return reserve_contiguous_params(ctlr, id, count, + return reserve_contiguous_slots(ctlr, id, count, edma_info[ctlr]->num_channels); case EDMA_CONT_PARAMS_FIXED_EXACT: case EDMA_CONT_PARAMS_FIXED_NOT_EXACT: - return reserve_contiguous_params(ctlr, id, count, slot); + return reserve_contiguous_slots(ctlr, id, count, slot); default: return -EINVAL; } @@ -799,21 +808,21 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count) EXPORT_SYMBOL(edma_alloc_cont_slots); /** - * edma_free_cont_slots - deallocate DMA parameter RAMs - * @slot: first parameter RAM of a set of parameter RAMs to be freed - * @count: the number of contiguous parameter RAMs to be freed + * edma_free_cont_slots - deallocate DMA parameter RAM slots + * @slot: first parameter RAM of a set of parameter RAM slots to be freed + * @count: the number of contiguous parameter RAM slots to be freed * * This deallocates the parameter RAM slots allocated by * edma_alloc_cont_slots. * Callers/applications need to keep track of sets of contiguous - * parameter RAMs that have been allocated using the edma_alloc_cont_slots + * parameter RAM slots that have been allocated using the edma_alloc_cont_slots * API. * Callers are responsible for ensuring the slots are inactive, and will * not be activated. */ int edma_free_cont_slots(unsigned slot, int count) { - unsigned ctlr; + unsigned ctlr, slot_to_free; int i; ctlr = EDMA_CTLR(slot); @@ -826,11 +835,11 @@ int edma_free_cont_slots(unsigned slot, int count) for (i = slot; i < slot + count; ++i) { ctlr = EDMA_CTLR(i); - slot = EDMA_CHAN_SLOT(i); + slot_to_free = EDMA_CHAN_SLOT(i); - memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), + memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free), &dummy_paramset, PARM_SIZE); - clear_bit(slot, edma_info[ctlr]->edma_inuse); + clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse); } return 0; diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index f6ea9db11f41..744755b53236 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -12,23 +12,14 @@ #include <linux/errno.h> #include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/irq.h> -#include <linux/bitops.h> -#include <mach/cputype.h> -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/common.h> #include <mach/gpio.h> #include <asm/mach/irq.h> - static DEFINE_SPINLOCK(gpio_lock); struct davinci_gpio { diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index e07f70ed7c53..834725f1e81d 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -11,6 +11,9 @@ #define DAVINCI_ASP0_BASE 0x01E02000 #define DAVINCI_ASP1_BASE 0x01E04000 +/* Bases of dm365 register banks */ +#define DAVINCI_DM365_ASP0_BASE 0x01D02000 + /* Bases of dm646x register banks */ #define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 #define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 1fd3917cae4e..6ca2c9a0a482 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -20,12 +20,6 @@ extern void davinci_irq_init(void); extern void __iomem *davinci_intc_base; extern int davinci_intc_type; -/* parameters describe VBUS sourcing for host mode */ -extern void setup_usb(unsigned mA, unsigned potpgt_msec); - -/* parameters describe VBUS sourcing for host mode */ -extern void setup_usb(unsigned mA, unsigned potpgt_msec); - struct davinci_timer_instance { void __iomem *base; u32 bottom_irq; diff --git a/arch/arm/mach-davinci/include/mach/cpufreq.h b/arch/arm/mach-davinci/include/mach/cpufreq.h new file mode 100644 index 000000000000..3c089cfb6cd6 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cpufreq.h @@ -0,0 +1,26 @@ +/* + * TI DaVinci CPUFreq platform support. + * + * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef _MACH_DAVINCI_CPUFREQ_H +#define _MACH_DAVINCI_CPUFREQ_H + +#include <linux/cpufreq.h> + +struct davinci_cpufreq_config { + struct cpufreq_frequency_table *freq_table; + int (*set_voltage) (unsigned int index); + int (*init) (void); +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h new file mode 100644 index 000000000000..cbfc6a9c81b4 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cpuidle.h @@ -0,0 +1,17 @@ +/* + * TI DaVinci cpuidle platform support + * + * 2009 (C) Texas Instruments, Inc. http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _MACH_DAVINCI_CPUIDLE_H +#define _MACH_DAVINCI_CPUIDLE_H + +struct davinci_cpuidle_config { + u32 ddr2_pdown; +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index d4095d0572c6..90704910d343 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -11,12 +11,17 @@ #ifndef __ASM_ARCH_DAVINCI_DA8XX_H #define __ASM_ARCH_DAVINCI_DA8XX_H +#include <video/da8xx-fb.h> + #include <mach/serial.h> #include <mach/edma.h> #include <mach/i2c.h> #include <mach/emac.h> #include <mach/asp.h> #include <mach/mmc.h> +#include <mach/usb.h> + +extern void __iomem *da8xx_syscfg_base; /* * The cp_intc interrupt controller for the da8xx isn't in the same @@ -29,11 +34,15 @@ #define DA8XX_CP_INTC_SIZE SZ_8K #define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K) -#define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000) +#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000) +#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x)) +#define DA8XX_JTAG_ID_REG 0x18 +#define DA8XX_CFGCHIP0_REG 0x17c +#define DA8XX_CFGCHIP2_REG 0x184 +#define DA8XX_CFGCHIP3_REG 0x188 #define DA8XX_PSC0_BASE 0x01c10000 #define DA8XX_PLL0_BASE 0x01c11000 -#define DA8XX_JTAG_ID_REG 0x01c14018 #define DA8XX_TIMER64P0_BASE 0x01c20000 #define DA8XX_TIMER64P1_BASE 0x01c21000 #define DA8XX_GPIO_BASE 0x01e26000 @@ -43,6 +52,7 @@ #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 +#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define PINMUX0 0x00 #define PINMUX1 0x04 @@ -71,13 +81,20 @@ void __init da850_init(void); int da8xx_register_edma(void); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); int da8xx_register_watchdog(void); +int da8xx_register_usb20(unsigned mA, unsigned potpgt); +int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); -int da8xx_register_lcdc(void); +int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); -void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata); +void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata); +int da8xx_register_rtc(void); +int da850_register_cpufreq(void); +int da8xx_register_cpuidle(void); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; +extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata; +extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata; extern const short da830_emif25_pins[]; extern const short da830_spi0_pins[]; @@ -110,6 +127,7 @@ extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; extern const short da850_cpgmac_pins[]; +extern const short da850_rmii_pins[]; extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; extern const short da850_mmcsd0_pins[]; diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index 09db4343bb4c..f1710a30e7ba 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -16,6 +16,8 @@ #include <linux/platform_device.h> #include <mach/hardware.h> #include <mach/emac.h> +#include <mach/asp.h> +#include <mach/keyscan.h> #define DM365_EMAC_BASE (0x01D07000) #define DM365_EMAC_CNTRL_OFFSET (0x0000) @@ -24,6 +26,14 @@ #define DM365_EMAC_MDIO_OFFSET (0x4000) #define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) +/* Base of key scan register bank */ +#define DM365_KEYSCAN_BASE (0x01C69400) + +#define DM365_RTC_BASE (0x01C69000) + void __init dm365_init(void); +void __init dm365_init_asp(struct snd_platform_data *pdata); +void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); +void __init dm365_init_rtc(void); #endif /* __ASM_ARCH_DM365_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 0efb73852c2c..44e8f0fae9ea 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -22,7 +22,6 @@ #ifndef __ASM_ARCH_DM644X_H #define __ASM_ARCH_DM644X_H -#include <linux/platform_device.h> #include <mach/hardware.h> #include <mach/emac.h> #include <mach/asp.h> diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 3c918a772619..354af71798dc 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -217,6 +217,7 @@ #define IRQ_DM365_SDIOINT0 23 #define IRQ_DM365_MMCINT1 27 #define IRQ_DM365_PWMINT3 28 +#define IRQ_DM365_RTCINT 29 #define IRQ_DM365_SDIOINT1 31 #define IRQ_DM365_SPIINT0_0 42 #define IRQ_DM365_SPIINT3_0 43 diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h new file mode 100644 index 000000000000..b4e21a2976d1 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/keyscan.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2009 Texas Instruments, Inc + * + * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef DAVINCI_KEYSCAN_H +#define DAVINCI_KEYSCAN_H + +#include <linux/io.h> + +enum davinci_matrix_types { + DAVINCI_KEYSCAN_MATRIX_4X4, + DAVINCI_KEYSCAN_MATRIX_5X3, +}; + +struct davinci_ks_platform_data { + unsigned short *keymap; + u32 keymapsize; + u8 rep:1; + u8 strobe; + u8 interval; + u8 matrix_type; +}; + +#endif + diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index bb84893a4e83..b60c693985ff 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -40,6 +40,11 @@ enum davinci_dm644x_index { /* AEAW functions */ DM644X_AEAW, + DM644X_AEAW0, + DM644X_AEAW1, + DM644X_AEAW2, + DM644X_AEAW3, + DM644X_AEAW4, /* Memory Stick */ DM644X_MSTK, @@ -237,8 +242,8 @@ enum davinci_dm365_index { DM365_EMAC_MDIO, DM365_EMAC_MDCLK, - /* Keypad */ - DM365_KEYPAD, + /* Key Scan */ + DM365_KEYSCAN, /* PWM */ DM365_PWM0, @@ -774,6 +779,14 @@ enum davinci_da850_index { DA850_MII_RXD_0, DA850_MDIO_CLK, DA850_MDIO_D, + DA850_RMII_TXD_0, + DA850_RMII_TXD_1, + DA850_RMII_TXEN, + DA850_RMII_CRS_DV, + DA850_RMII_RXD_0, + DA850_RMII_RXD_1, + DA850_RMII_RXER, + DA850_RMII_MHZ_50_CLK, /* McASP function */ DA850_ACLKR, @@ -881,8 +894,9 @@ enum davinci_da850_index { DA850_NEMA_CS_2, /* GPIO function */ + DA850_GPIO2_6, + DA850_GPIO2_8, DA850_GPIO2_15, - DA850_GPIO8_10, DA850_GPIO4_0, DA850_GPIO4_1, }; diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h index 8e4f10fe1263..5a7d7581b8ce 100644 --- a/arch/arm/mach-davinci/include/mach/system.h +++ b/arch/arm/mach-davinci/include/mach/system.h @@ -11,9 +11,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include <linux/io.h> -#include <mach/hardware.h> - extern void davinci_watchdog_reset(void); static inline void arch_idle(void) diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h new file mode 100644 index 000000000000..e0bc4abe69c2 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/usb.h @@ -0,0 +1,59 @@ +/* + * USB related definitions + * + * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ +#define CFGCHIP2_PHYCLKGD (1 << 17) +#define CFGCHIP2_VBUSSENSE (1 << 16) +#define CFGCHIP2_RESET (1 << 15) +#define CFGCHIP2_OTGMODE (3 << 13) +#define CFGCHIP2_NO_OVERRIDE (0 << 13) +#define CFGCHIP2_FORCE_HOST (1 << 13) +#define CFGCHIP2_FORCE_DEVICE (2 << 13) +#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) +#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) +#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) +#define CFGCHIP2_PHYPWRDN (1 << 10) +#define CFGCHIP2_OTGPWRDN (1 << 9) +#define CFGCHIP2_DATPOL (1 << 8) +#define CFGCHIP2_USB1SUSPENDM (1 << 7) +#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ +#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ +#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ +#define CFGCHIP2_REFFREQ (0xf << 0) +#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) +#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) +#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) + +struct da8xx_ohci_root_hub; + +typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, + unsigned port); + +/* Passed as the platform data to the OHCI driver */ +struct da8xx_ohci_root_hub { + /* Switch the port power on/off */ + int (*set_power)(unsigned port, int on); + /* Read the port power status */ + int (*get_power)(unsigned port); + /* Read the port over-current indicator */ + int (*get_oci)(unsigned port); + /* Over-current indicator change notification (pass NULL to disable) */ + int (*ocic_notify)(da8xx_ocic_handler_t handler); + + /* Time from power on to power good (in 2 ms units) */ + u8 potpgt; +}; + +void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); + +#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 898905e48946..f757e83415f3 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/spinlock.h> -#include <mach/hardware.h> #include <mach/mux.h> #include <mach/common.h> diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a78b657e916e..04a3cb72c5ab 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -19,14 +19,11 @@ * */ #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/io.h> #include <mach/cputype.h> -#include <mach/hardware.h> #include <mach/psc.h> -#include <mach/mux.h> /* PSC register offsets */ #define EPCPR 0x070 diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index c530c7333d0a..7ce5ba086575 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -28,14 +28,8 @@ #include <linux/clk.h> #include <linux/io.h> -#include <asm/irq.h> -#include <mach/hardware.h> #include <mach/serial.h> -#include <mach/irqs.h> #include <mach/cputype.h> -#include <mach/common.h> - -#include "clock.h" static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, int offset) diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index 4f1fc9b318b3..db0f7787faf1 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -9,15 +9,12 @@ * (at your option) any later version. */ #include <linux/module.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/genalloc.h> #include <mach/common.h> -#include <mach/memory.h> #include <mach/sram.h> - static struct gen_pool *sram_pool; void *sram_alloc(size_t len, dma_addr_t *dma) diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 0d1b6d407b46..42d985beece5 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -14,20 +14,14 @@ #include <linux/interrupt.h> #include <linux/clocksource.h> #include <linux/clockchips.h> -#include <linux/spinlock.h> #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h> -#include <linux/device.h> #include <linux/platform_device.h> #include <mach/hardware.h> -#include <asm/system.h> -#include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <asm/errno.h> -#include <mach/io.h> #include <mach/cputype.h> #include <mach/time.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 06f55931620c..31f0cbea0caa 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -1,21 +1,21 @@ /* * USB */ -#include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/musb.h> -#include <linux/usb/otg.h> #include <mach/common.h> -#include <mach/hardware.h> #include <mach/irqs.h> #include <mach/cputype.h> +#include <mach/usb.h> -#define DAVINCI_USB_OTG_BASE 0x01C64000 +#define DAVINCI_USB_OTG_BASE 0x01c64000 + +#define DA8XX_USB0_BASE 0x01e00000 +#define DA8XX_USB1_BASE 0x01e25000 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { @@ -85,10 +85,10 @@ static struct platform_device usb_dev = { .num_resources = ARRAY_SIZE(usb_resources), }; -void __init setup_usb(unsigned mA, unsigned potpgt_msec) +void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms) { - usb_data.power = mA / 2; - usb_data.potpgt = potpgt_msec / 2; + usb_data.power = mA > 510 ? 255 : mA / 2; + usb_data.potpgt = (potpgt_ms + 1) / 2; if (cpu_is_davinci_dm646x()) { /* Override the defaults as DM6467 uses different IRQs. */ @@ -100,11 +100,77 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec) platform_device_register(&usb_dev); } +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +static struct resource da8xx_usb20_resources[] = { + { + .start = DA8XX_USB0_BASE, + .end = DA8XX_USB0_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +int __init da8xx_register_usb20(unsigned mA, unsigned potpgt) +{ + usb_data.clock = "usb20"; + usb_data.power = mA > 510 ? 255 : mA / 2; + usb_data.potpgt = (potpgt + 1) / 2; + + usb_dev.resource = da8xx_usb20_resources; + usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources); + + return platform_device_register(&usb_dev); +} +#endif /* CONFIG_DAVINCI_DA8XX */ + #else -void __init setup_usb(unsigned mA, unsigned potpgt_msec) +void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms) { } +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +int __init da8xx_register_usb20(unsigned mA, unsigned potpgt) +{ + return 0; +} +#endif + #endif /* CONFIG_USB_MUSB_HDRC */ +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +static struct resource da8xx_usb11_resources[] = { + [0] = { + .start = DA8XX_USB1_BASE, + .end = DA8XX_USB1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DA8XX_IRQN, + .end = IRQ_DA8XX_IRQN, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device da8xx_usb11_device = { + .name = "ohci", + .id = 0, + .dev = { + .dma_mask = &da8xx_usb11_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(da8xx_usb11_resources), + .resource = da8xx_usb11_resources, +}; + +int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata) +{ + da8xx_usb11_device.dev.platform_data = pdata; + return platform_device_register(&da8xx_usb11_device); +} +#endif /* CONFIG_DAVINCI_DA8XX */ diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h index 48e827d2fa56..59d2ace35217 100644 --- a/arch/arm/mach-lh7a40x/include/mach/hardware.h +++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h @@ -31,7 +31,7 @@ /* * This __REG() version gives the same results as the one above, except * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc + * assembly code for access to contiguous registers. It's a shame that gcc * doesn't guess this by itself. */ #include <asm/types.h> diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index d140abca690a..f780086befd7 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -3,6 +3,30 @@ if ARCH_MSM comment "MSM Board Type" depends on ARCH_MSM +config MSM_DEBUG_UART + int + default 1 if MSM_DEBUG_UART1 + default 2 if MSM_DEBUG_UART2 + default 3 if MSM_DEBUG_UART3 + +choice + prompt "Debug UART" + + default MSM_DEBUG_UART_NONE + + config MSM_DEBUG_UART_NONE + bool "None" + + config MSM_DEBUG_UART1 + bool "UART1" + + config MSM_DEBUG_UART2 + bool "UART2" + + config MSM_DEBUG_UART3 + bool "UART3" +endchoice + config MACH_HALIBUT depends on ARCH_MSM default y @@ -10,4 +34,10 @@ config MACH_HALIBUT help Support for the Qualcomm SURF7201A eval board. +config MACH_TROUT + default y + bool "HTC Dream (aka trout)" + help + Support for the HTC Dream, T-Mobile G1, Android ADP1 devices. + endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 1aa47001aa3b..91e6f5c95dc1 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -6,3 +6,4 @@ obj-y += clock.o clock-7x01a.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o +obj-$(CONFIG_MACH_TROUT) += board-dream.o diff --git a/arch/arm/mach-msm/board-dream.c b/arch/arm/mach-msm/board-dream.c new file mode 100644 index 000000000000..21afa8513168 --- /dev/null +++ b/arch/arm/mach-msm/board-dream.c @@ -0,0 +1,93 @@ +/* linux/arch/arm/mach-msm/board-dream.c + * + * Copyright (C) 2009 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> + +#include <mach/board.h> +#include <mach/hardware.h> +#include <mach/msm_iomap.h> + +#include "devices.h" +#include "board-dream.h" + +static struct platform_device *devices[] __initdata = { + &msm_device_uart3, + &msm_device_smd, + &msm_device_nand, + &msm_device_hsusb, + &msm_device_i2c, +}; + +extern struct sys_timer msm_timer; + +static void __init trout_init_irq(void) +{ + msm_init_irq(); +} + +static void __init trout_fixup(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + mi->nr_banks = 1; + mi->bank[0].start = PHYS_OFFSET; + mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); + mi->bank[0].size = (101*1024*1024); +} + +static void __init trout_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static struct map_desc trout_io_desc[] __initdata = { + { + .virtual = TROUT_CPLD_BASE, + .pfn = __phys_to_pfn(TROUT_CPLD_START), + .length = TROUT_CPLD_SIZE, + .type = MT_DEVICE_NONSHARED + } +}; + +static void __init trout_map_io(void) +{ + msm_map_common_io(); + iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc)); + +#ifdef CONFIG_MSM_DEBUG_UART3 + /* route UART3 to the "H2W" extended usb connector */ + writeb(0x80, TROUT_CPLD_BASE + 0x00); +#endif + + msm_clock_init(); +} + +MACHINE_START(TROUT, "HTC Dream") + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .fixup = trout_fixup, + .map_io = trout_map_io, + .init_irq = trout_init_irq, + .init_machine = trout_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/board-dream.h b/arch/arm/mach-msm/board-dream.h new file mode 100644 index 000000000000..4f345a5a0a61 --- /dev/null +++ b/arch/arm/mach-msm/board-dream.h @@ -0,0 +1,5 @@ + +#define TROUT_CPLD_BASE 0xE8100000 +#define TROUT_CPLD_START 0x98000000 +#define TROUT_CPLD_SIZE SZ_4K + diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 1db3c97dbc49..d48747ebcd3d 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -14,15 +14,18 @@ * */ + + #include <mach/hardware.h> #include <mach/msm_iomap.h> +#ifdef CONFIG_MSM_DEBUG_UART .macro addruart,rx @ see if the MMU is enabled and select appropriate base address mrc p15, 0, \rx, c1, c0 tst \rx, #1 - ldreq \rx, =MSM_UART1_PHYS - movne \rx, #0 + ldreq \rx, =MSM_DEBUG_UART_PHYS + ldrne \rx, =MSM_DEBUG_UART_BASE .endm .macro senduart,rd,rx @@ -32,13 +35,20 @@ .macro waituart,rd,rx @ wait for TX_READY - teq \rx, #0 - bne 2f -1: ldr \rd, [\rx, #0x08] +1001: ldr \rd, [\rx, #0x08] tst \rd, #0x04 - beq 1b -2: + beq 1001b + .endm +#else + .macro addruart,rx + .endm + + .macro senduart,rd,rx + .endm + + .macro waituart,rd,rx .endm +#endif .macro busyuart,rd,rx .endm diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h new file mode 100644 index 000000000000..0ecf25426284 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/mmc.h @@ -0,0 +1,26 @@ +/* + * arch/arm/include/asm/mach/mmc.h + */ +#ifndef ASMARM_MACH_MMC_H +#define ASMARM_MACH_MMC_H + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio_func.h> + +struct embedded_sdio_data { + struct sdio_cis cis; + struct sdio_cccr cccr; + struct sdio_embedded_func *funcs; + int num_funcs; +}; + +struct mmc_platform_data { + unsigned int ocr_mask; /* available voltages */ + u32 (*translate_vdd)(struct device *, unsigned int); + unsigned int (*status)(struct device *); + struct embedded_sdio_data *embedded_sdio; + int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); +}; + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 2f7b4c8620d9..9dae1a98c77a 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -84,6 +84,18 @@ #define MSM_UART3_PHYS 0xA9C00000 #define MSM_UART3_SIZE SZ_4K +#ifdef CONFIG_MSM_DEBUG_UART +#define MSM_DEBUG_UART_BASE 0xE1000000 +#if CONFIG_MSM_DEBUG_UART == 1 +#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS +#elif CONFIG_MSM_DEBUG_UART == 2 +#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS +#elif CONFIG_MSM_DEBUG_UART == 3 +#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS +#endif +#define MSM_DEBUG_UART_SIZE SZ_4K +#endif + #define MSM_SDC1_PHYS 0xA0400000 #define MSM_SDC1_SIZE SZ_4K diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index 026e8955ace9..d94292c29d8e 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -16,9 +16,16 @@ #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H #include "hardware.h" +#include "linux/io.h" +#include "mach/msm_iomap.h" static void putc(int c) { +#if defined(MSM_DEBUG_UART_PHYS) + unsigned base = MSM_DEBUG_UART_PHYS; + while (!(readl(base + 0x08) & 0x04)) ; + writel(c, base + 0x0c); +#endif } static inline void flush(void) diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 6e7692ff6f2c..1c5e7dac086f 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -42,6 +42,9 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(GPIO1), MSM_DEVICE(GPIO2), MSM_DEVICE(CLK_CTL), +#ifdef CONFIG_MSM_DEBUG_UART + MSM_DEVICE(DEBUG_UART), +#endif { .virtual = (unsigned long) MSM_SHARED_RAM_BASE, .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 87e539aa8ad9..9ce17f13d3f1 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o +obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o +obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -17,6 +18,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + led-y := leds.o # Specific board support @@ -48,3 +52,7 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o obj-$(CONFIG_LEDS) += $(led-y) + +ifneq ($(CONFIG_FB_OMAP),) +obj-y += lcd_dma.o +endif diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index f4b72c1654f5..7e70c3c08da6 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -19,6 +19,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -30,7 +31,6 @@ #include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> -#include <plat/nand.h> #include <plat/keypad.h> #include <plat/common.h> #include <plat/board.h> @@ -100,6 +100,12 @@ static int fsample_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -167,8 +173,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define FSAMPLE_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -178,7 +216,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -190,6 +228,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -233,13 +274,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config fsample_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -250,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 89ba8ec4bbf4..fa7cecea19f9 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/gpio.h> @@ -40,7 +41,6 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/nand.h> #include <plat/irda.h> #include <plat/usb.h> #include <plat/keypad.h> @@ -179,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data h2_nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = h2_nand_partitions, - .nr_parts = ARRAY_SIZE(h2_nand_partitions), +static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H2_NAND_RB_GPIO_PIN 62 + +static int h2_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H2_NAND_RB_GPIO_PIN); +} + +static const char *h2_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data h2_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(h2_nand_partitions), + .partitions = h2_nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = h2_part_probes, + }, + .ctrl = { + .cmd_ctrl = h2_nand_cmd_ctl, + .dev_ready = h2_nand_dev_ready, + + }, }; static struct resource h2_nand_resource = { @@ -191,15 +223,21 @@ static struct resource h2_nand_resource = { }; static struct platform_device h2_nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &h2_nand_data, + .platform_data = &h2_nand_platdata, }, .num_resources = 1, .resource = &h2_nand_resource, }; +static struct smc91x_platdata h2_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource h2_smc91x_resources[] = { [0] = { .start = OMAP1610_ETHR_START, /* Physical */ @@ -216,6 +254,9 @@ static struct resource h2_smc91x_resources[] = { static struct platform_device h2_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &h2_smc91x_info, + }, .num_resources = ARRAY_SIZE(h2_smc91x_resources), .resource = h2_smc91x_resources, }; @@ -368,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { { OMAP_TAG_LCD, &h2_lcd_config }, }; -#define H2_NAND_RB_GPIO_PIN 62 - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f5cc0a730524..6a7f9c391cf1 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -28,6 +28,7 @@ #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> #include <asm/setup.h> #include <asm/page.h> @@ -42,7 +43,6 @@ #include <mach/irqs.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/nand.h> #include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> @@ -181,11 +181,43 @@ static struct mtd_partition nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = nand_partitions, - .nr_parts = ARRAY_SIZE(nand_partitions), +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H3_NAND_RB_GPIO_PIN 10 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H3_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(nand_partitions), + .partitions = nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + + }, }; static struct resource nand_resource = { @@ -193,15 +225,21 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &nand_data, + .platform_data = &nand_platdata, }, .num_resources = 1, .resource = &nand_resource, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = OMAP1710_ETHR_START, /* Physical */ @@ -218,6 +256,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -332,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - static void __init h3_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped @@ -356,7 +390,7 @@ static void __init h3_init(void) nand_resource.end += SZ_4K - 1; if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 5f28a5ceacac..e36639f66150 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -39,6 +39,7 @@ #include <plat/common.h> #include <plat/board.h> #include <plat/keypad.h> +#include <plat/usb.h> #include <mach/irqs.h> @@ -140,6 +141,15 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* USB Device */ +static struct omap_usb_config htcherald_usb_config __initdata = { + .otg = 0, + .register_host = 0, + .register_dev = 1, + .hmc_mode = 4, + .pins[0] = 2, +}; + /* LCD Device resources */ static struct platform_device lcd_device = { .name = "lcd_htcherald", @@ -214,6 +224,57 @@ static void __init htcherald_disable_watchdog(void) } } +#define HTCHERALD_GPIO_USB_EN1 33 +#define HTCHERALD_GPIO_USB_EN2 73 +#define HTCHERALD_GPIO_USB_DM 35 +#define HTCHERALD_GPIO_USB_DP 36 + +static void __init htcherald_usb_enable(void) +{ + unsigned int tries = 20; + unsigned int value = 0; + + /* Request the GPIOs we need to control here */ + if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0) + goto err1; + + if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0) + goto err2; + + if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0) + goto err3; + + if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0) + goto err4; + + /* force USB_EN GPIO to 0 */ + do { + /* output low */ + gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0); + } while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 && + --tries); + + if (value == 1) + printk(KERN_WARNING "Unable to reset USB, trying to continue\n"); + + gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */ + gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */ + gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */ + + goto done; + +err4: + gpio_free(HTCHERALD_GPIO_USB_DM); +err3: + gpio_free(HTCHERALD_GPIO_USB_EN2); +err2: + gpio_free(HTCHERALD_GPIO_USB_EN1); +err1: + printk(KERN_ERR "Unabled to request GPIO for USB\n"); +done: + printk(KERN_INFO "USB setup complete.\n"); +} + static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); @@ -225,6 +286,9 @@ static void __init htcherald_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); + + htcherald_usb_enable(); + omap_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cf0fdb9c182f..2133b006f6a3 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -23,6 +23,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -142,6 +143,11 @@ static struct platform_device innovator_kp_device = { .resource = innovator_kp_resources, }; +static struct smc91x_platdata innovator_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; #ifdef CONFIG_ARCH_OMAP15XX @@ -175,6 +181,9 @@ static struct resource innovator1510_smc91x_resources[] = { static struct platform_device innovator1510_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources), .resource = innovator1510_smc91x_resources, }; @@ -241,6 +250,9 @@ static struct resource innovator1610_smc91x_resources[] = { static struct platform_device innovator1610_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources), .resource = innovator1610_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 5a275bab2dfe..71e1a3fad0ea 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/clk.h> +#include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -32,7 +33,6 @@ #include <plat/keypad.h> #include <plat/common.h> #include <plat/dsp_common.h> -#include <plat/omapfb.h> #include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 50c92c13e48a..ccea4f448e9a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -33,6 +33,7 @@ #include <linux/irq.h> #include <linux/i2c.h> #include <linux/leds.h> +#include <linux/smc91x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -115,6 +116,12 @@ static struct platform_device osk5912_flash_device = { .resource = &osk_flash_resource, }; +static struct smc91x_platdata osk5912_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource osk5912_smc91x_resources[] = { [0] = { .start = OMAP_OSK_ETHR_START, /* Physical */ @@ -131,6 +138,9 @@ static struct resource osk5912_smc91x_resources[] = { static struct platform_device osk5912_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &osk5912_smc91x_info, + }, .num_resources = ARRAY_SIZE(osk5912_smc91x_resources), .resource = osk5912_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ca7df1e93efc..1387a4f15da9 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -19,6 +19,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -30,7 +31,6 @@ #include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> -#include <plat/nand.h> #include <plat/keypad.h> #include <plat/common.h> #include <plat/board.h> @@ -67,6 +67,12 @@ static int p2_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -134,8 +140,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define P2_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(P2_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -145,7 +183,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -157,6 +195,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -201,13 +242,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -220,7 +254,7 @@ static void __init omap_perseus2_init(void) { if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 35c75c1bd0aa..169183537997 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -22,6 +22,7 @@ #include <linux/reboot.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -106,6 +107,12 @@ static struct platform_device voiceblue_flash_device = { .resource = &voiceblue_flash_resource, }; +static struct smc91x_platdata voiceblue_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, @@ -122,6 +129,9 @@ static struct resource voiceblue_smc91x_resources[] = { static struct platform_device voiceblue_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &voiceblue_smc91x_info, + }, .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), .resource = voiceblue_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 42cbe203da36..2ba9ab953731 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.c * - * Copyright (C) 2004 - 2005 Nokia corporation + * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * * Modified to use omap shared clock framework by @@ -26,12 +26,17 @@ #include <plat/usb.h> #include <plat/clock.h> #include <plat/sram.h> - -static const struct clkops clkops_generic; -static const struct clkops clkops_uart; -static const struct clkops clkops_dspck; +#include <plat/clkdev_omap.h> #include "clock.h" +#include "opp.h" + +__u32 arm_idlect1_mask; +struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; + +/*------------------------------------------------------------------------- + * Omap1 specific clock functions + *-------------------------------------------------------------------------*/ static int clk_omap1_dummy_enable(struct clk *clk) { @@ -42,134 +47,24 @@ static void clk_omap1_dummy_disable(struct clk *clk) { } -static const struct clkops clkops_dummy = { - .enable = clk_omap1_dummy_enable, - .disable = clk_omap1_dummy_disable, -}; - -static struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_dummy, - .flags = RATE_FIXED, -}; - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; +const struct clkops clkops_dummy = { + .enable = clk_omap1_dummy_enable, + .disable = clk_omap1_dummy_disable, }; -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) - -static struct omap_clk omap_clks[] = { - /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), - /* CK_GEN1 clocks */ - CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), - CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), - CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), - CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), - /* CK_GEN2 clocks */ - CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), - /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), - CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), - CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), - CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), - CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), - CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), - CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), - CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), - /* ULPD clocks */ - CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), - CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), - CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), - CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), - CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), - CLK(NULL, "mclk", &mclk_16xx, CK_16XX), - CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), - CLK(NULL, "bclk", &bclk_16xx, CK_16XX), - CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), - CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), - CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), - /* Virtual clocks */ - CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), -}; - -static int omap1_clk_enable_generic(struct clk * clk); -static int omap1_clk_enable(struct clk *clk); -static void omap1_clk_disable_generic(struct clk * clk); -static void omap1_clk_disable(struct clk *clk); - -__u32 arm_idlect1_mask; - -/*------------------------------------------------------------------------- - * Omap1 specific clock functions - *-------------------------------------------------------------------------*/ - -static unsigned long omap1_watchdog_recalc(struct clk *clk) +/* XXX can be replaced with a fixed_divisor_recalc */ +unsigned long omap1_watchdog_recalc(struct clk *clk) { return clk->parent->rate / 14; } -static unsigned long omap1_uart_recalc(struct clk *clk) +unsigned long omap1_uart_recalc(struct clk *clk) { unsigned int val = __raw_readl(clk->enable_reg); return val & clk->enable_bit ? 48000000 : 12000000; } -static unsigned long omap1_sossi_recalc(struct clk *clk) +unsigned long omap1_sossi_recalc(struct clk *clk) { u32 div = omap_readl(MOD_CONF_CTRL_1); @@ -179,64 +74,6 @@ static unsigned long omap1_sossi_recalc(struct clk *clk) return clk->parent->rate / div; } -static int omap1_clk_enable_dsp_domain(struct clk *clk) -{ - int retval; - - retval = omap1_clk_enable(&api_ck.clk); - if (!retval) { - retval = omap1_clk_enable_generic(clk); - omap1_clk_disable(&api_ck.clk); - } - - return retval; -} - -static void omap1_clk_disable_dsp_domain(struct clk *clk) -{ - if (omap1_clk_enable(&api_ck.clk) == 0) { - omap1_clk_disable_generic(clk); - omap1_clk_disable(&api_ck.clk); - } -} - -static const struct clkops clkops_dspck = { - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, -}; - -static int omap1_clk_enable_uart_functional(struct clk *clk) -{ - int ret; - struct uart_clk *uclk; - - ret = omap1_clk_enable_generic(clk); - if (ret == 0) { - /* Set smart idle acknowledgement mode */ - uclk = (struct uart_clk *)clk; - omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, - uclk->sysc_addr); - } - - return ret; -} - -static void omap1_clk_disable_uart_functional(struct clk *clk) -{ - struct uart_clk *uclk; - - /* Set force idle acknowledgement mode */ - uclk = (struct uart_clk *)clk; - omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); - - omap1_clk_disable_generic(clk); -} - -static const struct clkops clkops_uart = { - .enable = &omap1_clk_enable_uart_functional, - .disable = &omap1_clk_disable_uart_functional, -}; - static void omap1_clk_allow_idle(struct clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -344,7 +181,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } -static unsigned long omap1_ckctl_recalc(struct clk *clk) +unsigned long omap1_ckctl_recalc(struct clk *clk) { /* Calculate divisor encoded as 2-bit exponent */ int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); @@ -352,7 +189,7 @@ static unsigned long omap1_ckctl_recalc(struct clk *clk) return clk->parent->rate / dsor; } -static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) +unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) { int dsor; @@ -363,28 +200,29 @@ static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) * Note that DSP_CKCTL virt addr = phys addr, so * we must use __raw_readw() instead of omap_readw(). */ - omap1_clk_enable(&api_ck.clk); + omap1_clk_enable(api_ck_p); dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - omap1_clk_disable(&api_ck.clk); + omap1_clk_disable(api_ck_p); return clk->parent->rate / dsor; } /* MPU virtual clock functions */ -static int omap1_select_table_rate(struct clk * clk, unsigned long rate) +int omap1_select_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate and switch to it */ struct mpu_rate * ptr; + unsigned long dpll1_rate, ref_rate; - if (clk != &virtual_ck_mpu) - return -EINVAL; + dpll1_rate = clk_get_rate(ck_dpll1_p); + ref_rate = clk_get_rate(ck_ref_p); - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) + for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ref_rate) continue; /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) + if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate) continue; /* Can check only after xtal frequency check */ @@ -405,11 +243,13 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - ck_dpll1.rate = ptr->pll_rate; + /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ + ck_dpll1_p->rate = ptr->pll_rate; + return 0; } -static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) { int dsor_exp; u16 regval; @@ -429,7 +269,7 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) return 0; } -static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) { int dsor_exp = calc_dsor_exp(clk, rate); if (dsor_exp < 0) @@ -439,7 +279,7 @@ static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) return clk->parent->rate / (1 << dsor_exp); } -static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) { int dsor_exp; u16 regval; @@ -459,19 +299,19 @@ static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) return 0; } -static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) +long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate */ struct mpu_rate * ptr; - long highest_rate; + long highest_rate; + unsigned long ref_rate; - if (clk != &virtual_ck_mpu) - return -EINVAL; + ref_rate = clk_get_rate(ck_ref_p); highest_rate = -EINVAL; - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) + for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ref_rate) continue; highest_rate = ptr->rate; @@ -506,8 +346,8 @@ static unsigned calc_ext_dsor(unsigned long rate) return dsor; } -/* Only needed on 1510 */ -static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) +/* XXX Only needed on 1510 */ +int omap1_set_uart_rate(struct clk *clk, unsigned long rate) { unsigned int val; @@ -525,7 +365,7 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) } /* External clock (MCLK & BCLK) functions */ -static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) +int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) { unsigned dsor; __u16 ratio_bits; @@ -543,7 +383,7 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) return 0; } -static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) +int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) { u32 l; int div; @@ -566,12 +406,12 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) return 0; } -static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate) +long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) { return 96000000 / calc_ext_dsor(rate); } -static void omap1_init_ext_clk(struct clk * clk) +void omap1_init_ext_clk(struct clk *clk) { unsigned dsor; __u16 ratio_bits; @@ -589,7 +429,7 @@ static void omap1_init_ext_clk(struct clk * clk) clk-> rate = 96000000 / dsor; } -static int omap1_clk_enable(struct clk *clk) +int omap1_clk_enable(struct clk *clk) { int ret = 0; @@ -617,7 +457,7 @@ err: return ret; } -static void omap1_clk_disable(struct clk *clk) +void omap1_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { clk->ops->disable(clk); @@ -672,12 +512,70 @@ static void omap1_clk_disable_generic(struct clk *clk) } } -static const struct clkops clkops_generic = { - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, +const struct clkops clkops_generic = { + .enable = omap1_clk_enable_generic, + .disable = omap1_clk_disable_generic, +}; + +static int omap1_clk_enable_dsp_domain(struct clk *clk) +{ + int retval; + + retval = omap1_clk_enable(api_ck_p); + if (!retval) { + retval = omap1_clk_enable_generic(clk); + omap1_clk_disable(api_ck_p); + } + + return retval; +} + +static void omap1_clk_disable_dsp_domain(struct clk *clk) +{ + if (omap1_clk_enable(api_ck_p) == 0) { + omap1_clk_disable_generic(clk); + omap1_clk_disable(api_ck_p); + } +} + +const struct clkops clkops_dspck = { + .enable = omap1_clk_enable_dsp_domain, + .disable = omap1_clk_disable_dsp_domain, +}; + +static int omap1_clk_enable_uart_functional(struct clk *clk) +{ + int ret; + struct uart_clk *uclk; + + ret = omap1_clk_enable_generic(clk); + if (ret == 0) { + /* Set smart idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, + uclk->sysc_addr); + } + + return ret; +} + +static void omap1_clk_disable_uart_functional(struct clk *clk) +{ + struct uart_clk *uclk; + + /* Set force idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); + + omap1_clk_disable_generic(clk); +} + +const struct clkops clkops_uart = { + .enable = omap1_clk_enable_uart_functional, + .disable = omap1_clk_disable_uart_functional, }; -static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate(struct clk *clk, unsigned long rate) { if (clk->flags & RATE_FIXED) return clk->rate; @@ -688,7 +586,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) return clk->rate; } -static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EINVAL; @@ -703,7 +601,7 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) #ifdef CONFIG_OMAP_RESET_CLOCKS -static void __init omap1_clk_disable_unused(struct clk *clk) +void __init omap1_clk_disable_unused(struct clk *clk) { __u32 regval32; @@ -724,184 +622,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == 0) return; - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */ - || clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */ - || clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */ - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - clk->name); - return; - } - printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); clk->ops->disable(clk); printk(" done\n"); } -#else -#define omap1_clk_disable_unused NULL #endif - -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - -int __init omap1_clk_init(void) -{ - struct omap_clk *c; - const struct omap_clock_config *info; - int crystal_type = 0; /* Default 12 MHz */ - u32 reg, cpu_mask; - -#ifdef CONFIG_DEBUG_LL - /* Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. - */ - omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -#endif - - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - reg = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(reg, SOFT_REQ_REG); - if (!cpu_is_omap15xx()) - omap_writew(0, SOFT_REQ_REG2); - - clk_init(&omap1_clk_functions); - - /* By default all idlect1 clocks are allowed to idle */ - arm_idlect1_mask = ~0; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_preinit(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap16xx()) - cpu_mask |= CK_16XX; - if (cpu_is_omap1510()) - cpu_mask |= CK_1510; - if (cpu_is_omap7xx()) - cpu_mask |= CK_7XX; - if (cpu_is_omap310()) - cpu_mask |= CK_310; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - } - - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap15xx()) - crystal_type = info->system_clock_type; - } - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - ck_ref.rate = 13000000; -#elif defined(CONFIG_ARCH_OMAP16XX) - if (crystal_type == 2) - ck_ref.rate = 19200000; -#endif - - printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", - omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), - omap_readw(ARM_CKCTL)); - - /* We want to be in syncronous scalable mode */ - omap_writew(0x1000, ARM_SYSST); - -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. - */ - { - unsigned pll_ctl_val = omap_readw(DPLL_CTL); - - ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ - if (pll_ctl_val & 0x10) { - /* PLL enabled, apply multiplier and divisor */ - if (pll_ctl_val & 0xf80) - ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; - ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; - } else { - /* PLL disabled, apply bypass divisor */ - switch (pll_ctl_val & 0xc) { - case 0: - break; - case 0x4: - ck_dpll1.rate /= 2; - break; - default: - ck_dpll1.rate /= 4; - break; - } - } - } -#else - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - } -#endif - propagate_rate(&ck_dpll1); - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - -#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); -#endif - - /* Amstrad Delta wants BCLK high when inactive */ - if (machine_is_ams_delta()) - omap_writel(omap_readl(ULPD_CLOCK_CTRL) | - (1 << SDW_MCLK_INV_BIT), - ULPD_CLOCK_CTRL); - - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap7xx()) - omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); - else - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); - - /* Put DSP/MPUI into reset until needed */ - omap_writew(0, ARM_RSTCT1); - omap_writew(1, ARM_RSTCT2); - omap_writew(0x400, ARM_IDLECT1); - - /* - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) - * of the ARM_IDLECT2 register must be set to zero. The power-on - * default value of this bit is one. - */ - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable(&armper_ck.clk); - clk_enable(&armxor_ck.clk); - clk_enable(&armtim_ck.clk); /* This should be done by timer code */ - - if (cpu_is_omap15xx()) - clk_enable(&arm_gpio_ck); - - return 0; -} diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 29ffa97dc7f3..a4190afb8614 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.h * - * Copyright (C) 2004 - 2005 Nokia corporation + * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc * @@ -13,30 +13,36 @@ #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H #define __ARCH_ARM_MACH_OMAP1_CLOCK_H -static unsigned long omap1_ckctl_recalc(struct clk *clk); -static unsigned long omap1_watchdog_recalc(struct clk *clk); -static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); -static unsigned long omap1_sossi_recalc(struct clk *clk); -static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); -static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); -static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); -static unsigned long omap1_uart_recalc(struct clk *clk); -static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); -static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); -static void omap1_init_ext_clk(struct clk * clk); -static int omap1_select_table_rate(struct clk * clk, unsigned long rate); -static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); - -static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); -static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); - -struct mpu_rate { - unsigned long rate; - unsigned long xtal; - unsigned long pll_rate; - __u16 ckctl_val; - __u16 dpllctl_val; -}; +#include <linux/clk.h> + +#include <plat/clock.h> + +extern int __init omap1_clk_init(void); +extern int omap1_clk_enable(struct clk *clk); +extern void omap1_clk_disable(struct clk *clk); +extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_ckctl_recalc(struct clk *clk); +extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_sossi_recalc(struct clk *clk); +extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); +extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); +extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_uart_recalc(struct clk *clk); +extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); +extern void omap1_init_ext_clk(struct clk *clk); +extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern unsigned long omap1_watchdog_recalc(struct clk *clk); + +#ifdef CONFIG_OMAP_RESET_CLOCKS +extern void __init omap1_clk_disable_unused(struct clk *clk); +#else +#define omap1_clk_disable_unused NULL +#endif struct uart_clk { struct clk clk; @@ -96,596 +102,12 @@ struct arm_idlect1_clk { #define SOFT_REQ_REG 0xfffe0834 #define SOFT_REQ_REG2 0xfffe0880 -/*------------------------------------------------------------------------- - * Omap1 MPU rate table - *-------------------------------------------------------------------------*/ -static struct mpu_rate rate_table[] = { - /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL - * NOTE: Comment order here is different from bits in CKCTL value: - * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv - */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif - { 0, 0, 0, 0, 0 }, -}; - -/*------------------------------------------------------------------------- - * Omap1 clocks - *-------------------------------------------------------------------------*/ - -static struct clk ck_ref = { - .name = "ck_ref", - .ops = &clkops_null, - .rate = 12000000, -}; - -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .ops = &clkops_null, - .parent = &ck_ref, -}; - -static struct arm_idlect1_clk ck_dpll1out = { - .clk = { - .name = "ck_dpll1out", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, - }, - .idlect_shift = 12, -}; - -static struct clk sossi_ck = { - .name = "ck_sossi", - .ops = &clkops_generic, - .parent = &ck_dpll1out.clk, - .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), - .enable_bit = 16, - .recalc = &omap1_sossi_recalc, - .set_rate = &omap1_set_sossi_rate, -}; - -static struct clk arm_ck = { - .name = "arm_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_ARMDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk armper_ck = { - .clk = { - .name = "armper_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 2, -}; - -static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk armxor_ck = { - .clk = { - .name = "armxor_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 1, -}; - -static struct arm_idlect1_clk armtim_ck = { - .clk = { - .name = "armtim_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 9, -}; - -static struct arm_idlect1_clk armwdt_ck = { - .clk = { - .name = "armwdt_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_WDTCK, - .recalc = &omap1_watchdog_recalc, - }, - .idlect_shift = 0, -}; - -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &arm_ck, - .recalc = &followparent_recalc, - /* Note: On 16xx the frequency can be divided by 2 by programming - * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 - * - * 1510 version is in TC clocks. - */ -}; - -static struct clk dsp_ck = { - .name = "dsp_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), - .enable_bit = EN_DSPCK, - .rate_offset = CKCTL_DSPDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_DSPMMUDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspper_ck = { - .name = "dspper_ck", - .ops = &clkops_dspck, - .parent = &ck_dpll1, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc_dsp_domain, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = &omap1_clk_set_rate_dsp_domain, -}; - -static struct clk dspxor_ck = { - .name = "dspxor_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk dsptim_ck = { - .name = "dsptim_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, -}; - -/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ -static struct arm_idlect1_clk tc_ck = { - .clk = { - .name = "tc_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .rate_offset = CKCTL_TCDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 6, -}; - -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, - /* Note: On 1510 the frequency follows TC_CK - * - * 16xx version is in MPU clocks. - */ -}; - -static struct clk tipb_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "tipb_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk l3_ocpi_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "l3_ocpi_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, -}; - -static struct clk tc1_ck = { - .name = "tc1_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, -}; +extern __u32 arm_idlect1_mask; +extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -static struct clk tc2_ck = { - .name = "tc2_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, -}; - -static struct clk dma_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "dma_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk api_ck = { - .clk = { - .name = "api_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_APICK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 8, -}; - -static struct arm_idlect1_clk lb_ck = { - .clk = { - .name = "lb_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 4, -}; - -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk lcd_ck_16xx = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk lcd_ck_1510 = { - .clk = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 3, -}; - -static struct clk uart1_1510 = { - .name = "uart1_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct uart_clk uart1_16xx = { - .clk = { - .name = "uart1_ck", - .ops = &clkops_uart, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, - }, - .sysc_addr = 0xfffb0054, -}; - -static struct clk uart2_ck = { - .name = "uart2_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct clk uart3_1510 = { - .name = "uart3_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct uart_clk uart3_16xx = { - .clk = { - .name = "uart3_ck", - .ops = &clkops_uart, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, - }, - .sysc_addr = 0xfffb9854, -}; - -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 6000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), - .enable_bit = USB_MCLK_EN_BIT, -}; - -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = USB_HOST_HHC_UHOST_EN, -}; - -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ - .enable_bit = 8 /* UHOST_EN */, -}; - -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 4, -}; - -static struct clk usb_dc_ck7xx = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 8, -}; - -static struct clk mclk_1510 = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 6, -}; - -static struct clk mclk_16xx = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), - .enable_bit = COM_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk bclk_1510 = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = RATE_FIXED, -}; - -static struct clk bclk_16xx = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), - .enable_bit = SWD_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk mmc1_ck = { - .name = "mmc_ck", - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 23, -}; - -static struct clk mmc2_ck = { - .name = "mmc_ck", - .id = 1, - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 20, -}; - -static struct clk mmc3_ck = { - .name = "mmc_ck", - .id = 2, - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 12, -}; - -static struct clk virtual_ck_mpu = { - .name = "mpu", - .ops = &clkops_null, - .parent = &arm_ck, /* Is smarter alias for */ - .recalc = &followparent_recalc, - .set_rate = &omap1_select_table_rate, - .round_rate = &omap1_round_to_table_rate, -}; - -/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK -remains active during MPU idle whenever this is enabled */ -static struct clk i2c_fck = { - .name = "i2c_fck", - .id = 1, - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armxor_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk i2c_ick = { - .name = "i2c_ick", - .id = 1, - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armper_ck.clk, - .recalc = &followparent_recalc, -}; +extern const struct clkops clkops_dspck; +extern const struct clkops clkops_dummy; +extern const struct clkops clkops_uart; +extern const struct clkops clkops_generic; #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c new file mode 100644 index 000000000000..ab995a9c606c --- /dev/null +++ b/arch/arm/mach-omap1/clock_data.c @@ -0,0 +1,843 @@ +/* + * linux/arch/arm/mach-omap1/clock_data.c + * + * Copyright (C) 2004 - 2005, 2009 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/mach-types.h> /* for machine_is_* */ + +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/clkdev_omap.h> +#include <plat/usb.h> /* for OTG_BASE */ + +#include "clock.h" + +/*------------------------------------------------------------------------ + * Omap1 clocks + *-------------------------------------------------------------------------*/ + +/* XXX is this necessary? */ +static struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_dummy, + .flags = RATE_FIXED, +}; + +static struct clk ck_ref = { + .name = "ck_ref", + .ops = &clkops_null, + .rate = 12000000, +}; + +static struct clk ck_dpll1 = { + .name = "ck_dpll1", + .ops = &clkops_null, + .parent = &ck_ref, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ FIX: SoSSI, SSR ] + */ +static struct arm_idlect1_clk ck_dpll1out = { + .clk = { + .name = "ck_dpll1out", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | + ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_CKOUT_ARM, + .recalc = &followparent_recalc, + }, + .idlect_shift = 12, +}; + +static struct clk sossi_ck = { + .name = "ck_sossi", + .ops = &clkops_generic, + .parent = &ck_dpll1out.clk, + .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), + .enable_bit = 16, + .recalc = &omap1_sossi_recalc, + .set_rate = &omap1_set_sossi_rate, +}; + +static struct clk arm_ck = { + .name = "arm_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_ARMDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk armper_ck = { + .clk = { + .name = "armper_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 2, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ GPIO code for 1510 ] + */ +static struct clk arm_gpio_ck = { + .name = "arm_gpio_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_GPIOCK, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk armxor_ck = { + .clk = { + .name = "armxor_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 1, +}; + +static struct arm_idlect1_clk armtim_ck = { + .clk = { + .name = "armtim_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_TIMCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 9, +}; + +static struct arm_idlect1_clk armwdt_ck = { + .clk = { + .name = "armwdt_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_WDTCK, + .recalc = &omap1_watchdog_recalc, + }, + .idlect_shift = 0, +}; + +static struct clk arminth_ck16xx = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &arm_ck, + .recalc = &followparent_recalc, + /* Note: On 16xx the frequency can be divided by 2 by programming + * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 + * + * 1510 version is in TC clocks. + */ +}; + +static struct clk dsp_ck = { + .name = "dsp_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), + .enable_bit = EN_DSPCK, + .rate_offset = CKCTL_DSPDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspmmu_ck = { + .name = "dspmmu_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_DSPMMUDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspper_ck = { + .name = "dspper_ck", + .ops = &clkops_dspck, + .parent = &ck_dpll1, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc_dsp_domain, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = &omap1_clk_set_rate_dsp_domain, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, +}; + +/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ +static struct arm_idlect1_clk tc_ck = { + .clk = { + .name = "tc_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .rate_offset = CKCTL_TCDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 6, +}; + +static struct clk arminth_ck1510 = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, + /* Note: On 1510 the frequency follows TC_CK + * + * 16xx version is in MPU clocks. + */ +}; + +static struct clk tipb_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "tipb_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk l3_ocpi_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "l3_ocpi_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_OCPI_CK, + .recalc = &followparent_recalc, +}; + +static struct clk tc1_ck = { + .name = "tc1_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC1_CK, + .recalc = &followparent_recalc, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ pm.c (SRAM), CCP, Camera ] + */ +static struct clk tc2_ck = { + .name = "tc2_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC2_CK, + .recalc = &followparent_recalc, +}; + +static struct clk dma_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "dma_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk dma_lcdfree_ck = { + .name = "dma_lcdfree_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk api_ck = { + .clk = { + .name = "api_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_APICK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 8, +}; + +static struct arm_idlect1_clk lb_ck = { + .clk = { + .name = "lb_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LBCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 4, +}; + +static struct clk rhea1_ck = { + .name = "rhea1_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk rhea2_ck = { + .name = "rhea2_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk lcd_ck_16xx = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk lcd_ck_1510 = { + .clk = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 3, +}; + +static struct clk uart1_1510 = { + .name = "uart1_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct uart_clk uart1_16xx = { + .clk = { + .name = "uart1_ck", + .ops = &clkops_uart, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 29, + }, + .sysc_addr = 0xfffb0054, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct clk uart3_1510 = { + .name = "uart3_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct uart_clk uart3_16xx = { + .clk = { + .name = "uart3_ck", + .ops = &clkops_uart, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 31, + }, + .sysc_addr = 0xfffb9854, +}; + +static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ + .name = "usb_clko", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 6000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), + .enable_bit = USB_MCLK_EN_BIT, +}; + +static struct clk usb_hhc_ck1510 = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = USB_HOST_HHC_UHOST_EN, +}; + +static struct clk usb_hhc_ck16xx = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ + .enable_bit = 8 /* UHOST_EN */, +}; + +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 4, +}; + +static struct clk usb_dc_ck7xx = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 8, +}; + +static struct clk mclk_1510 = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 6, +}; + +static struct clk mclk_16xx = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), + .enable_bit = COM_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk bclk_1510 = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = RATE_FIXED, +}; + +static struct clk bclk_16xx = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), + .enable_bit = SWD_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk mmc1_ck = { + .name = "mmc_ck", + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 23, +}; + +static struct clk mmc2_ck = { + .name = "mmc_ck", + .id = 1, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 20, +}; + +static struct clk mmc3_ck = { + .name = "mmc_ck", + .id = 2, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 12, +}; + +static struct clk virtual_ck_mpu = { + .name = "mpu", + .ops = &clkops_null, + .parent = &arm_ck, /* Is smarter alias for */ + .recalc = &followparent_recalc, + .set_rate = &omap1_select_table_rate, + .round_rate = &omap1_round_to_table_rate, +}; + +/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK +remains active during MPU idle whenever this is enabled */ +static struct clk i2c_fck = { + .name = "i2c_fck", + .id = 1, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armxor_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c_ick = { + .name = "i2c_ick", + .id = 1, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armper_ck.clk, + .recalc = &followparent_recalc, +}; + +/* + * clkdev integration + */ + +static struct omap_clk omap_clks[] = { + /* non-ULPD clocks */ + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + /* CK_GEN1 clocks */ + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + /* CK_GEN2 clocks */ + CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + /* CK_GEN3 clocks */ + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), + CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + /* ULPD clocks */ + CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx, CK_16XX), + CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), + CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), + /* Virtual clocks */ + CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), +}; + +/* + * init + */ + +static struct clk_functions omap1_clk_functions __initdata = { + .clk_enable = omap1_clk_enable, + .clk_disable = omap1_clk_disable, + .clk_round_rate = omap1_clk_round_rate, + .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, +}; + +int __init omap1_clk_init(void) +{ + struct omap_clk *c; + const struct omap_clock_config *info; + int crystal_type = 0; /* Default 12 MHz */ + u32 reg, cpu_mask; + +#ifdef CONFIG_DEBUG_LL + /* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. + */ + omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +#endif + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + if (!cpu_is_omap15xx()) + omap_writew(0, SOFT_REQ_REG2); + + clk_init(&omap1_clk_functions); + + /* By default all idlect1 clocks are allowed to idle */ + arm_idlect1_mask = ~0; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + clk_preinit(c->lk.clk); + + cpu_mask = 0; + if (cpu_is_omap16xx()) + cpu_mask |= CK_16XX; + if (cpu_is_omap1510()) + cpu_mask |= CK_1510; + if (cpu_is_omap7xx()) + cpu_mask |= CK_7XX; + if (cpu_is_omap310()) + cpu_mask |= CK_310; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + } + + /* Pointers to these clocks are needed by code in clock.c */ + api_ck_p = clk_get(NULL, "api_ck"); + ck_dpll1_p = clk_get(NULL, "ck_dpll1"); + ck_ref_p = clk_get(NULL, "ck_ref"); + + info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); + if (info != NULL) { + if (!cpu_is_omap15xx()) + crystal_type = info->system_clock_type; + } + +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + ck_ref.rate = 13000000; +#elif defined(CONFIG_ARCH_OMAP16XX) + if (crystal_type == 2) + ck_ref.rate = 19200000; +#endif + + pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: " + "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + + /* We want to be in syncronous scalable mode */ + omap_writew(0x1000, ARM_SYSST); + +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } +#else + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + printk(KERN_ERR "System frequencies not set. Check your config.\n"); + /* Guess sane values (60MHz) */ + omap_writew(0x2290, DPLL_CTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = 60000000; + } +#endif + propagate_rate(&ck_dpll1); + /* Cache rates for clocks connected to ck_ref (not dpll1) */ + propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); + +#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); +#endif + + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + /* (on 730, bit 13 must not be cleared) */ + if (cpu_is_omap7xx()) + omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); + else + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + + /* Put DSP/MPUI into reset until needed */ + omap_writew(0, ARM_RSTCT1); + omap_writew(1, ARM_RSTCT2); + omap_writew(0x400, ARM_IDLECT1); + + /* + * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) + * of the ARM_IDLECT2 register must be set to zero. The power-on + * default value of this bit is one. + */ + omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable(&armper_ck.clk); + clk_enable(&armxor_ck.clk); + clk_enable(&armtim_ck.clk); /* This should be done by timer code */ + + if (cpu_is_omap15xx()) + clk_enable(&arm_gpio_ck); + + return 0; +} diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c new file mode 100644 index 000000000000..1bf4735e27a6 --- /dev/null +++ b/arch/arm/mach-omap1/i2c.c @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/i2c.h> +#include <plat/mux.h> +#include <plat/cpu.h> + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap7xx()) { + omap_cfg_reg(I2C_7XX_SDA); + omap_cfg_reg(I2C_7XX_SCL); + } else { + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h new file mode 100644 index 000000000000..d7a457bbcb7f --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-omap1/include/mach/lcd_dma.h + * + * Extracted from arch/arm/plat-omap/include/plat/dma.h + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_OMAP1_LCD_DMA_H__ +#define __MACH_OMAP1_LCD_DMA_H__ + +/* Hardware registers for LCD DMA */ +#define OMAP1510_DMA_LCD_BASE (0xfffedb00) +#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) +#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) +#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) +#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) +#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) + +#define OMAP1610_DMA_LCD_BASE (0xfffee300) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) +#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) +#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) +#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) +#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) +#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) +#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) +#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) +#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) +#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) +#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) +#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) +#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) +#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) +#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) +#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) + +/* LCD DMA block numbers */ +enum { + OMAP_LCD_DMA_B1_TOP, + OMAP_LCD_DMA_B1_BOTTOM, + OMAP_LCD_DMA_B2_TOP, + OMAP_LCD_DMA_B2_BOTTOM +}; + +/* LCD DMA functions */ +extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data); +extern void omap_free_lcd_dma(void); +extern void omap_setup_lcd_dma(void); +extern void omap_enable_lcd_dma(void); +extern void omap_stop_lcd_dma(void); +extern void omap_set_lcd_dma_ext_controller(int external); +extern void omap_set_lcd_dma_single_transfer(int single); +extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type); +extern void omap_set_lcd_dma_b1_rotation(int rotate); +extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); +extern void omap_set_lcd_dma_b1_mirror(int mirror); +extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); + +extern int omap_lcd_dma_running(void); + +#endif /* __MACH_OMAP1_LCD_DMA_H__ */ diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h new file mode 100644 index 000000000000..89bd703adaf6 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcdc.h @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-omap1/include/mach/lcdc.h + * + * Extracted from drivers/video/omap/lcdc.c + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __MACH_LCDC_H__ +#define __MACH_LCDC_H__ + +#define OMAP_LCDC_BASE 0xfffec000 +#define OMAP_LCDC_SIZE 256 +#define OMAP_LCDC_IRQ INT_LCD_CTRL + +#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) +#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) +#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) +#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) +#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) +#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) +#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) +#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) + +#define OMAP_LCDC_STAT_DONE (1 << 0) +#define OMAP_LCDC_STAT_VSYNC (1 << 1) +#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) +#define OMAP_LCDC_STAT_ABC (1 << 3) +#define OMAP_LCDC_STAT_LINE_INT (1 << 4) +#define OMAP_LCDC_STAT_FUF (1 << 5) +#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) + +#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) +#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) +#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) + +#define OMAP_LCDC_IRQ_VSYNC (1 << 2) +#define OMAP_LCDC_IRQ_DONE (1 << 3) +#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) +#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) +#define OMAP_LCDC_IRQ_LINE (1 << 6) +#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) + +#endif /* __MACH_LCDC_H__ */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 2a6d68aa3489..d9b8d82530ae 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,8 @@ #include <plat/mux.h> #include <plat/tc.h> -extern int omap1_clk_init(void); +#include "clock.h" + extern void omap_check_revision(void); extern void omap_sram_init(void); extern void omapfb_reserve_sdram(void); diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c new file mode 100644 index 000000000000..3be11af687bb --- /dev/null +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -0,0 +1,448 @@ +/* + * linux/arch/arm/mach-omap1/lcd_dma.c + * + * Extracted from arch/arm/plat-omap/dma.c + * Copyright (C) 2003 - 2008 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> + * Graphics DMA and LCD DMA graphics tranformations + * by Imre Deak <imre.deak@nokia.com> + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> + * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Support functions for the OMAP internal DMA channels. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/lcdc.h> +#include <plat/dma.h> + +int omap_lcd_dma_running(void) +{ + /* + * On OMAP1510, internal LCD controller will start the transfer + * when it gets enabled, so assume DMA running if LCD enabled. + */ + if (cpu_is_omap1510()) + if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) + return 1; + + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; + + return 0; +} + +static struct lcd_dma_info { + spinlock_t lock; + int reserved; + void (*callback)(u16 status, void *data); + void *cb_data; + + int active; + unsigned long addr, size; + int rotate, data_type, xres, yres; + int vxres; + int mirror; + int xscale, yscale; + int ext_ctrl; + int src_port; + int single_transfer; +} lcd_dma; + +void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type) +{ + lcd_dma.addr = addr; + lcd_dma.data_type = data_type; + lcd_dma.xres = fb_xres; + lcd_dma.yres = fb_yres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1); + +void omap_set_lcd_dma_src_port(int port) +{ + lcd_dma.src_port = port; +} + +void omap_set_lcd_dma_ext_controller(int external) +{ + lcd_dma.ext_ctrl = external; +} +EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); + +void omap_set_lcd_dma_single_transfer(int single) +{ + lcd_dma.single_transfer = single; +} +EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); + +void omap_set_lcd_dma_b1_rotation(int rotate) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); + BUG(); + return; + } + lcd_dma.rotate = rotate; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); + +void omap_set_lcd_dma_b1_mirror(int mirror) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.mirror = mirror; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); + +void omap_set_lcd_dma_b1_vxres(unsigned long vxres) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA virtual resulotion is not supported " + "in 1510 mode\n"); + BUG(); + } + lcd_dma.vxres = vxres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); + +void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.xscale = xscale; + lcd_dma.yscale = yscale; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); + +static void set_b1_regs(void) +{ + unsigned long top, bottom; + int es; + u16 w; + unsigned long en, fn; + long ei, fi; + unsigned long vxres; + unsigned int xscale, yscale; + + switch (lcd_dma.data_type) { + case OMAP_DMA_DATA_TYPE_S8: + es = 1; + break; + case OMAP_DMA_DATA_TYPE_S16: + es = 2; + break; + case OMAP_DMA_DATA_TYPE_S32: + es = 4; + break; + default: + BUG(); + return; + } + + vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; + xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; + yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; + BUG_ON(vxres < lcd_dma.xres); + +#define PIXADDR(x, y) (lcd_dma.addr + \ + ((y) * vxres * yscale + (x) * xscale) * es) +#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) + + switch (lcd_dma.rotate) { + case 0: + if (!lcd_dma.mirror) { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + /* 1510 DMA requires the bottom address to be 2 more + * than the actual last memory access location. */ + if (cpu_is_omap1510() && + lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) + bottom += 2; + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 90: + if (!lcd_dma.mirror) { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + case 180: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); + } else { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 270: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); + } else { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + default: + BUG(); + return; /* Suppress warning about uninitialized vars */ + } + + if (cpu_is_omap1510()) { + omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); + omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); + omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); + omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); + + return; + } + + /* 1610 regs */ + omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); + omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); + omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); + omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); + + omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); + omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); + + w = omap_readw(OMAP1610_DMA_LCD_CSDP); + w &= ~0x03; + w |= lcd_dma.data_type; + omap_writew(w, OMAP1610_DMA_LCD_CSDP); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + /* Always set the source port as SDRAM for now*/ + w &= ~(0x03 << 6); + if (lcd_dma.callback != NULL) + w |= 1 << 1; /* Block interrupt enable */ + else + w &= ~(1 << 1); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + if (!(lcd_dma.rotate || lcd_dma.mirror || + lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* Set the double-indexed addressing mode */ + w |= (0x03 << 12); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); + omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); + omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); +} + +static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) +{ + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + if (unlikely(!(w & (1 << 3)))) { + printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); + return IRQ_NONE; + } + /* Ack the IRQ */ + w |= (1 << 3); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 0; + if (lcd_dma.callback != NULL) + lcd_dma.callback(w, lcd_dma.cb_data); + + return IRQ_HANDLED; +} + +int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data) +{ + spin_lock_irq(&lcd_dma.lock); + if (lcd_dma.reserved) { + spin_unlock_irq(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA channel already reserved\n"); + BUG(); + return -EBUSY; + } + lcd_dma.reserved = 1; + spin_unlock_irq(&lcd_dma.lock); + lcd_dma.callback = callback; + lcd_dma.cb_data = data; + lcd_dma.active = 0; + lcd_dma.single_transfer = 0; + lcd_dma.rotate = 0; + lcd_dma.vxres = 0; + lcd_dma.mirror = 0; + lcd_dma.xscale = 0; + lcd_dma.yscale = 0; + lcd_dma.ext_ctrl = 0; + lcd_dma.src_port = 0; + + return 0; +} +EXPORT_SYMBOL(omap_request_lcd_dma); + +void omap_free_lcd_dma(void) +{ + spin_lock(&lcd_dma.lock); + if (!lcd_dma.reserved) { + spin_unlock(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA is not reserved\n"); + BUG(); + return; + } + if (!cpu_is_omap1510()) + omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, + OMAP1610_DMA_LCD_CCR); + lcd_dma.reserved = 0; + spin_unlock(&lcd_dma.lock); +} +EXPORT_SYMBOL(omap_free_lcd_dma); + +void omap_enable_lcd_dma(void) +{ + u16 w; + + /* + * Set the Enable bit only if an external controller is + * connected. Otherwise the OMAP internal controller will + * start the transfer when it gets enabled. + */ + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w |= 1 << 8; + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + lcd_dma.active = 1; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w |= 1 << 7; + omap_writew(w, OMAP1610_DMA_LCD_CCR); +} +EXPORT_SYMBOL(omap_enable_lcd_dma); + +void omap_setup_lcd_dma(void) +{ + BUG_ON(lcd_dma.active); + if (!cpu_is_omap1510()) { + /* Set some reasonable defaults */ + omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); + omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); + omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); + } + set_b1_regs(); + if (!cpu_is_omap1510()) { + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* + * If DMA was already active set the end_prog bit to have + * the programmed register set loaded into the active + * register set. + */ + w |= 1 << 11; /* End_prog */ + if (!lcd_dma.single_transfer) + w |= (3 << 8); /* Auto_init, repeat */ + omap_writew(w, OMAP1610_DMA_LCD_CCR); + } +} +EXPORT_SYMBOL(omap_setup_lcd_dma); + +void omap_stop_lcd_dma(void) +{ + u16 w; + + lcd_dma.active = 0; + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w &= ~(1 << 7); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); +} +EXPORT_SYMBOL(omap_stop_lcd_dma); + +static int __init omap_init_lcd_dma(void) +{ + int r; + + if (cpu_is_omap16xx()) { + u16 w; + + /* this would prevent OMAP sleep */ + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + } + + spin_lock_init(&lcd_dma.lock); + + r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, + "LCD DMA", NULL); + if (r != 0) + printk(KERN_ERR "unable to request IRQ for LCD DMA " + "(error %d)\n", r); + + return r; +} + +arch_initcall(omap_init_lcd_dma); + diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 785371e982fc..07212cc621ae 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -50,12 +50,18 @@ MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 6, 28, 1, 0) +MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3, 3, 1, 2, 0, 0) +MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) /* MMC Pins */ MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) + +/* I2C interface */ +MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) +MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h new file mode 100644 index 000000000000..07074d79adce --- /dev/null +++ b/arch/arm/mach-omap1/opp.h @@ -0,0 +1,28 @@ +/* + * linux/arch/arm/mach-omap1/opp.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H +#define __ARCH_ARM_MACH_OMAP1_OPP_H + +#include <linux/types.h> + +struct mpu_rate { + unsigned long rate; + unsigned long xtal; + unsigned long pll_rate; + __u16 ckctl_val; + __u16 dpllctl_val; +}; + +extern struct mpu_rate omap1_rate_table[]; + +#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c new file mode 100644 index 000000000000..75a546514994 --- /dev/null +++ b/arch/arm/mach-omap1/opp_data.c @@ -0,0 +1,59 @@ +/* + * linux/arch/arm/mach-omap1/opp_data.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "opp.h" + +/*------------------------------------------------------------------------- + * Omap1 MPU rate table + *-------------------------------------------------------------------------*/ +struct mpu_rate omap1_rate_table[] = { + /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL + * NOTE: Comment order here is different from bits in CKCTL value: + * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv + */ +#if defined(CONFIG_OMAP_ARM_216MHZ) + { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_195MHZ) + { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_192MHZ) + { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ + { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ + { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ + { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_182MHZ) + { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_168MHZ) + { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_150MHZ) + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_120MHZ) + { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_96MHZ) + { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_60MHZ) + { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_30MHZ) + { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ +#endif + { 0, 0, 0, 0, 0 }, +}; + diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7309aab305a9..76c11ee113e9 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -24,6 +24,18 @@ config ARCH_OMAP3430 depends on ARCH_OMAP3 && ARCH_OMAP34XX select ARCH_OMAP_OTG +config OMAP_PACKAGE_CBC + bool + +config OMAP_PACKAGE_CBB + bool + +config OMAP_PACKAGE_CUS + bool + +config OMAP_PACKAGE_CBP + bool + comment "OMAP Board Type" depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 @@ -52,14 +64,17 @@ config MACH_OMAP_2430SDP config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3EVM bool "OMAP 3530 EVM board" @@ -68,14 +83,22 @@ config MACH_OMAP3EVM config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB + +config MACH_OMAP3_TOUCHBOOK + bool "OMAP3 Touch Book" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_NOKIA_N800 bool @@ -96,26 +119,33 @@ config MACH_NOKIA_N8X0 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_CM_T35 bool "CompuLab CM-T35 module" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS + select OMAP_MUX config MACH_IGEP0020 bool "IGEP0020" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" @@ -128,3 +158,15 @@ config OMAP3_EMU help Say Y here to enable debugging hardware of omap3 +config OMAP3_SDRC_AC_TIMING + bool "Enable SDRC AC timing register changes" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + default n + help + If you know that none of your system initiators will attempt to + access SDRAM during CORE DVFS, select Y here. This should boost + SDRAM performance at lower CORE OPPs. There are relatively few + users who will wish to say yes at this point - almost everyone will + wish to say no. Selecting yes without understanding what is + going on could result in system crashes; + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 32548a4510c5..b32678b848bc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -6,11 +6,14 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o omap-2-3-common = irq.o sdrc.o omap_hwmod.o +omap-3-4-common = dpll.o prcm-common = prcm.o powerdomain.o -clock-common = clock.o clockdomain.o +clock-common = clock.o clock_common_data.o clockdomain.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) -obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \ + $(omap-3-4-common) +obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -23,6 +26,9 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o +# Pin multiplexing +obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o + # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o @@ -41,8 +47,11 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o # Clock framework -obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o -obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o +obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o +obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o +obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o +obj-$(CONFIG_ARCH_OMAP4) += clock44xx.o clock44xx_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o @@ -55,6 +64,9 @@ iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -93,7 +105,8 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ mmc-twl4030.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ mmc-twl4030.o - +obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 491364e44c7d..4cfb7b68dfad 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -31,16 +31,17 @@ #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/board.h> #include <plat/usb.h> #include <plat/common.h> #include <plat/dma.h> #include <plat/gpmc.h> +#include <plat/display.h> #include <plat/control.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { }, }; -static struct platform_device sdp3430_lcd_device = { - .name = "sdp2430_lcd", - .id = -1, + +#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 +#define SDP3430_LCD_PANEL_ENABLE_GPIO 5 + +static unsigned backlight_gpio; +static unsigned enable_gpio; +static int lcd_enabled; +static int dvi_enabled; + +static void __init sdp3430_display_init(void) +{ + int r; + + enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; + backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; + + r = gpio_request(enable_gpio, "LCD reset"); + if (r) { + printk(KERN_ERR "failed to get LCD reset GPIO\n"); + goto err0; + } + + r = gpio_request(backlight_gpio, "LCD Backlight"); + if (r) { + printk(KERN_ERR "failed to get LCD backlight GPIO\n"); + goto err1; + } + + gpio_direction_output(enable_gpio, 0); + gpio_direction_output(backlight_gpio, 0); + + return; +err1: + gpio_free(enable_gpio); +err0: + return; +} + +static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_direction_output(enable_gpio, 1); + gpio_direction_output(backlight_gpio, 1); + + lcd_enabled = 1; + + return 0; +} + +static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + lcd_enabled = 0; + + gpio_direction_output(enable_gpio, 0); + gpio_direction_output(backlight_gpio, 0); +} + +static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + + dvi_enabled = 1; + + return 0; +} + +static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) +{ +} + + +static struct omap_dss_device sdp3430_lcd_device = { + .name = "lcd", + .driver_name = "sharp_ls_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 16, + .platform_enable = sdp3430_panel_enable_lcd, + .platform_disable = sdp3430_panel_disable_lcd, }; -static struct regulator_consumer_supply sdp3430_vdac_supply = { - .supply = "vdac", - .dev = &sdp3430_lcd_device.dev, +static struct omap_dss_device sdp3430_dvi_device = { + .name = "dvi", + .driver_name = "generic_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = sdp3430_panel_enable_dvi, + .platform_disable = sdp3430_panel_disable_dvi, }; -static struct regulator_consumer_supply sdp3430_vdvi_supply = { - .supply = "vdvi", - .dev = &sdp3430_lcd_device.dev, +static struct omap_dss_device sdp3430_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .platform_enable = sdp3430_panel_enable_tv, + .platform_disable = sdp3430_panel_disable_tv, }; -static struct platform_device *sdp3430_devices[] __initdata = { + +static struct omap_dss_device *sdp3430_dss_devices[] = { &sdp3430_lcd_device, + &sdp3430_dvi_device, + &sdp3430_tv_device, +}; + +static struct omap_dss_board_info sdp3430_dss_data = { + .num_devices = ARRAY_SIZE(sdp3430_dss_devices), + .devices = sdp3430_dss_devices, + .default_device = &sdp3430_lcd_device, }; -static struct omap_lcd_config sdp3430_lcd_config __initdata = { - .ctrl_name = "internal", +static struct platform_device sdp3430_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &sdp3430_dss_data, + }, +}; + +static struct regulator_consumer_supply sdp3430_vdda_dac_supply = { + .supply = "vdda_dac", + .dev = &sdp3430_dss_device.dev, +}; + +static struct platform_device *sdp3430_devices[] __initdata = { + &sdp3430_dss_device, }; static struct omap_board_config_kernel sdp3430_config[] __initdata = { - { OMAP_TAG_LCD, &sdp3430_lcd_config }, }; static void __init omap_3430sdp_init_irq(void) @@ -392,22 +514,34 @@ static struct regulator_init_data sdp3430_vdac = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vdac_supply, + .consumer_supplies = &sdp3430_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ +static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { + { + .supply = "vdvi", + .dev = &sdp3430_lcd_device.dev, + }, + { + .supply = "vdds_dsi", + .dev = &sdp3430_dss_device.dev, + } +}; + static struct regulator_init_data sdp3430_vpll2 = { .constraints = { .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, + .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), + .consumer_supplies = sdp3430_vpll2_supplies, }; static struct twl4030_codec_audio_data sdp3430_audio = { @@ -491,7 +625,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -506,8 +642,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_3430sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); if (omap_rev() > OMAP3430_REV_ES1_0) @@ -521,6 +666,7 @@ static void __init omap_3430sdp_init(void) omap_serial_init(); usb_musb_init(); board_smc91x_init(); + sdp3430_display_init(); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); } diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 348b70b98336..739059632811 100755 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -23,6 +23,7 @@ #include <mach/board-zoom.h> +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) @@ -48,7 +49,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -82,8 +85,17 @@ static void __init omap_sdp_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 415a13d767cc..b4e6eca0e8a9 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -30,6 +30,8 @@ #include <plat/common.h> #include <plat/usb.h> +#include "mux.h" + /* * Board initialization */ @@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init am3517_evm_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 8a2ce77a02ec..fbbd68d69cc8 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,6 +26,7 @@ #include <linux/leds.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -120,6 +121,12 @@ static void __init apollon_flash_init(void) apollon_flash_resource[0].end = base + SZ_128K - 1; } +static struct smc91x_platdata appolon_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource apollon_smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -134,6 +141,9 @@ static struct resource apollon_smc91x_resources[] = { static struct platform_device apollon_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &appolon_smc91x_info, + }, .num_resources = ARRAY_SIZE(apollon_smc91x_resources), .resource = apollon_smc91x_resources, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 22c45290db63..1591aae64500 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -38,13 +38,13 @@ #include <plat/board.h> #include <plat/common.h> -#include <plat/mux.h> #include <plat/nand.h> #include <plat/gpmc.h> #include <plat/usb.h> #include <mach/hardware.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -482,8 +482,102 @@ static void __init cm_t35_map_io(void) omap2_map_common_io(); } +static struct omap_board_mux board_mux[] __initdata = { + /* nCS and IRQ for CM-T35 ethernet */ + OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), + OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* nCS and IRQ for SB-T35 ethernet */ + OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), + OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* PENDOWN GPIO */ + OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* MMC 2 */ + OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + + /* McSPI 1 */ + OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + + /* McSPI 4 */ + OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), + + /* McBSP 2 */ + OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* serial ports */ + OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* DSS */ + OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* TPS IRQ */ + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ + OMAP_PIN_INPUT_PULLUP), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + static void __init cm_t35_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); @@ -492,8 +586,6 @@ static void __init cm_t35_init(void) cm_t35_init_led(); usb_musb_init(); - - omap_cfg_reg(AF26_34XX_SYS_NIRQ); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fa62e80c13b7..44239e3ec02e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -27,9 +27,9 @@ #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> -#include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define IGEP2_SMSC911X_CS 5 @@ -203,8 +203,17 @@ static int __init igep2_i2c_init(void) return 0; } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init igep2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); igep2_i2c_init(); omap_serial_init(); usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c062238fe881..37431738f1c2 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -43,6 +43,7 @@ #include <plat/control.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define LDP_SMSC911X_CS 1 @@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_ldp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 41480bd0e58a..6ada8029f9a8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,10 +41,10 @@ #include <plat/common.h> #include <plat/gpmc.h> #include <plat/nand.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/timer-gp.h> +#include "mux.h" #include "mmc-twl4030.h" #define GPMC_CS0_BASE 0x60 @@ -140,10 +140,10 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_cfg_reg(AG9_34XX_GPIO23); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { - omap_cfg_reg(AH8_34XX_GPIO29); + omap_mux_init_gpio(29, OMAP_PIN_INPUT); } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -422,14 +422,23 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_beagle_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_serial_init(); - omap_cfg_reg(J25_34XX_GPIO170); + omap_mux_init_gpio(170, OMAP_PIN_INPUT); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); @@ -439,8 +448,8 @@ static void __init omap3_beagle_init(void) omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5efc2e9068db..18913e96e34d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -38,11 +38,11 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/common.h> #include <plat/mcspi.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -223,7 +223,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(L8_34XX_GPIO63); + omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); @@ -422,9 +422,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_evm_i2c_init(); @@ -440,24 +449,24 @@ static void __init omap3_evm_init(void) #endif if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_cfg_reg(AF9_34XX_GPIO22); + omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); /* Select EHCI port on main board */ - omap_cfg_reg(U3_34XX_GPIO61); + omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); /* setup EHCI phy reset config */ - omap_cfg_reg(AH14_34XX_GPIO21); + omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); ehci_pdata.reset_gpio_port[1] = 21; } else { /* setup EHCI phy reset on MDC */ - omap_cfg_reg(AF4_34XX_GPIO135_OUT); + omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); ehci_pdata.reset_gpio_port[1] = 135; } usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2db5ba5b3bf7..6f6c601eeab7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,8 +40,8 @@ #include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> -#include <plat/mux.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -98,10 +98,10 @@ static struct gpio_keys_button pandora_gpio_keys[] = { GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), - GPIO_BUTTON_LOW(111, BTN_A, "a"), - GPIO_BUTTON_LOW(106, BTN_B, "b"), - GPIO_BUTTON_LOW(109, BTN_X, "x"), - GPIO_BUTTON_LOW(101, BTN_Y, "y"), + GPIO_BUTTON_LOW(109, KEY_KP1, "game 1"), + GPIO_BUTTON_LOW(111, KEY_KP2, "game 2"), + GPIO_BUTTON_LOW(106, KEY_KP3, "game 3"), + GPIO_BUTTON_LOW(101, KEY_KP4, "game 4"), GPIO_BUTTON_LOW(102, BTN_TL, "l"), GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), GPIO_BUTTON_LOW(105, BTN_TR, "r"), @@ -315,7 +315,7 @@ static int __init omap3pandora_i2c_init(void) omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, ARRAY_SIZE(omap3pandora_i2c_boardinfo)); /* i2c2 pins are not connected */ - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } @@ -368,23 +368,8 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { } }; -static struct platform_device omap3pandora_lcd_device = { - .name = "pandora_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3pandora_lcd_config __initdata = { - .ctrl_name = "internal", -}; - -static struct omap_board_config_kernel omap3pandora_config[] __initdata = { - { OMAP_TAG_LCD, &omap3pandora_lcd_config }, -}; - static void __init omap3pandora_init_irq(void) { - omap_board_config = omap3pandora_config; - omap_board_config_size = ARRAY_SIZE(omap3pandora_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -392,7 +377,6 @@ static void __init omap3pandora_init_irq(void) } static struct platform_device *omap3pandora_devices[] __initdata = { - &omap3pandora_lcd_device, &pandora_leds_gpio, &pandora_keys_gpio, }; @@ -409,8 +393,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3pandora_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); @@ -423,8 +416,8 @@ static void __init omap3pandora_init(void) usb_musb_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c new file mode 100644 index 000000000000..c9e5ebb4d91d --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -0,0 +1,572 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3touchbook.c + * + * Copyright (C) 2009 Always Innovating + * + * Modified from mach-omap2/board-omap3beagleboard.c + * + * Initial code: Grégoire Gentil, Tim Yamin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <plat/mcspi.h> +#include <linux/spi/spi.h> + +#include <linux/spi/ads7846.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/usb.h> +#include <plat/timer-gp.h> + +#include "mux.h" +#include "mmc-twl4030.h" + +#include <asm/setup.h> + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define OMAP3_AC_GPIO 136 +#define OMAP3_TS_GPIO 162 +#define TB_BL_PWM_TIMER 9 +#define TB_KILL_POWER_GPIO 168 + +unsigned long touchbook_revision; + +static struct mtd_partition omap3touchbook_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3touchbook_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3touchbook_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3touchbook_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3touchbook_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3touchbook_nand_data, + }, + .num_resources = 1, + .resource = &omap3touchbook_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = 29, + }, + {} /* Terminator */ +}; + +static struct platform_device omap3_touchbook_lcd_device = { + .name = "omap3touchbook_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct regulator_consumer_supply touchbook_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply touchbook_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct gpio_led gpio_leds[]; + +static int touchbook_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_wp = 23; + } else { + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + } + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters */ + touchbook_vmmc1_supply.dev = mmc[0].dev; + touchbook_vsim_supply.dev = mmc[0].dev; + + /* REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + + gpio_request(gpio + 1, "EHCI_nOC"); + gpio_direction_input(gpio + 1); + + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + return 0; +} + +static struct twl4030_gpio_platform_data touchbook_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = touchbook_twl_gpio_setup, +}; + +static struct regulator_consumer_supply touchbook_vdac_supply = { + .supply = "vdac", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +static struct regulator_consumer_supply touchbook_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data touchbook_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data touchbook_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data touchbook_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data touchbook_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdvi_supply, +}; + +static struct twl4030_usb_data touchbook_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_codec_audio_data touchbook_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data touchbook_codec_data = { + .audio_mclk = 26000000, + .audio = &touchbook_audio_data, +}; + +static struct twl4030_platform_data touchbook_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &touchbook_usb_data, + .gpio = &touchbook_gpio_data, + .codec = &touchbook_codec_data, + .vmmc1 = &touchbook_vmmc1, + .vsim = &touchbook_vsim, + .vdac = &touchbook_vdac, + .vpll2 = &touchbook_vpll2, +}; + +static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &touchbook_twldata, + }, +}; + +static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("bq27200", 0x55), + }, +}; + +static int __init omap3_touchbook_i2c_init(void) +{ + /* Standard TouchBook bus */ + omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, + ARRAY_SIZE(touchbook_i2c_boardinfo)); + + /* Additional TouchBook bus */ + omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, + ARRAY_SIZE(touchBook_i2c_boardinfo)); + + return 0; +} + +static void __init omap3_ads7846_init(void) +{ + if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { + printk(KERN_ERR "Failed to request GPIO %d for " + "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); + return; + } + + gpio_direction_input(OMAP3_TS_GPIO); + omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); +} + +static struct ads7846_platform_data ads7846_config = { + .x_min = 100, + .y_min = 265, + .x_max = 3950, + .y_max = 3750, + .x_plate_ohms = 40, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 5, + .debounce_rep = 1, + .gpio_pendown = OMAP3_TS_GPIO, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 4, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), + .platform_data = &ads7846_config, + } +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "touchbook::usr0", + .default_trigger = "heartbeat", + .gpio = 150, + }, + { + .name = "touchbook::usr1", + .default_trigger = "mmc0", + .gpio = 149, + }, + { + .name = "touchbook::pmu_stat", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, + { + .code = KEY_POWER, + .gpio = 183, + .desc = "power", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = { + { OMAP_TAG_LCD, &omap3_touchbook_lcd_config }, +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init omap3_touchbook_init_irq(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = omap3_touchbook_config; + omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif + omap_gpio_init(); +} + +static struct platform_device *omap3_touchbook_devices[] __initdata = { + &omap3_touchbook_lcd_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3touchbook_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3touchbook_nand_data.cs = nandcs; + omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3touchbook_nand_data.gpmc_baseaddr = + (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3touchbook_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL +}; + +static void omap3_touchbook_poweroff(void) +{ + int r; + + r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get kill power GPIO\n"); + return; + } + + gpio_direction_output(TB_KILL_POWER_GPIO, 0); +} + +static void __init early_touchbook_revision(char **p) +{ + if (!*p) + return; + + strict_strtoul(*p, 10, &touchbook_revision); +} +__early_param("tbr=", early_touchbook_revision); + +static void __init omap3_touchbook_init(void) +{ + pm_power_off = omap3_touchbook_poweroff; + + omap3_touchbook_i2c_init(); + platform_add_devices(omap3_touchbook_devices, + ARRAY_SIZE(omap3_touchbook_devices)); + omap_serial_init(); + + omap_mux_init_gpio(170, OMAP_PIN_INPUT); + gpio_request(176, "DVI_nPD"); + /* REVISIT leave DVI powered down until it's needed ... */ + gpio_direction_output(176, true); + + /* Touchscreen and accelerometer */ + spi_register_board_info(omap3_ads7846_spi_board_info, + ARRAY_SIZE(omap3_ads7846_spi_board_info)); + omap3_ads7846_init(); + usb_musb_init(); + usb_ehci_init(&ehci_pdata); + omap3touchbook_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +} + +static void __init omap3_touchbook_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") + /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_touchbook_map_io, + .init_irq = omap3_touchbook_init_irq, + .init_machine = omap3_touchbook_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52dfd51a938e..5b78a87217e0 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,9 +44,9 @@ #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> -#include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -405,9 +405,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif static void __init overo_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); @@ -418,8 +426,8 @@ static void __init overo_init(void) overo_init_smsc911x(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 15ce6514c5fd..bf26ad31f9ba 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -33,6 +33,7 @@ #include <plat/onenand.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "mmc-twl4030.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 @@ -59,7 +60,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .bus_num = 4, .chip_select = 0, .max_speed_hz = 48000000, - .mode = SPI_MODE_2, + .mode = SPI_MODE_3, .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, @@ -630,9 +631,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = { static void __init board_smc91x_init(void) { - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); + omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); gpmc_smc91x_init(&board_smc91x_data); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1bb1de245917..67bb3476b707 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -23,13 +23,14 @@ #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/board.h> #include <plat/common.h> #include <plat/dma.h> #include <plat/gpmc.h> #include <plat/usb.h> +#include "mux.h" + struct omap_sdrc_params *rx51_get_sdram_timings(void); static struct omap_lcd_config rx51_lcd_config = { @@ -69,15 +70,24 @@ static void __init rx51_init_irq(void) extern void __init rx51_peripherals_init(void); +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init rx51_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index f14baa392760..258794db488f 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -152,14 +152,20 @@ static struct regulator_init_data zoom_vsim = { static struct twl4030_hsmmc_info mmc[] __initdata = { { + .name = "external", .mmc = 1, .wires = 4, .gpio_wp = -EINVAL, + .power_saving = true, }, { + .name = "internal", .mmc = 2, - .wires = 4, + .wires = 8, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .nonremovable = true, + .power_saving = true, }, {} /* Terminator */ }; @@ -167,11 +173,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(mmc); /* link regulators to MMC adapters ... we "know" the @@ -236,6 +239,7 @@ static struct twl4030_platform_data zoom_twldata = { .gpio = &zoom_gpio_data, .keypad = &zoom_kp_twl4030_data, .codec = &zoom_codec_data, + .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index d94d047c7dce..bb87cf7878ff 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -23,6 +23,7 @@ #include <mach/board-zoom.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" static void __init omap_zoom2_init_irq(void) @@ -68,8 +69,17 @@ static struct twl4030_platform_data zoom2_twldata = { #endif +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 8d965a6516c8..a9fe9181b010 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -21,6 +21,7 @@ #include <plat/common.h> #include <plat/board.h> +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" static void __init omap_zoom_map_io(void) @@ -42,8 +43,17 @@ static void __init omap_zoom_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 4716206547ac..759c72a48f7f 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -70,9 +70,41 @@ u8 cpu_mask; /*------------------------------------------------------------------------- - * OMAP2/3 specific clock functions + * OMAP2/3/4 specific clock functions *-------------------------------------------------------------------------*/ +void omap2_init_dpll_parent(struct clk *clk) +{ + u32 v; + struct dpll_data *dd; + + dd = clk->dpll_data; + if (!dd) + return; + + /* Return bypass rate if DPLL is bypassed */ + v = __raw_readl(dd->control_reg); + v &= dd->enable_mask; + v >>= __ffs(dd->enable_mask); + + /* Reparent in case the dpll is in bypass */ + if (cpu_is_omap24xx()) { + if (v == OMAP2XXX_EN_DPLL_LPBYPASS || + v == OMAP2XXX_EN_DPLL_FRBYPASS) + clk_reparent(clk, dd->clk_bypass); + } else if (cpu_is_omap34xx()) { + if (v == OMAP3XXX_EN_DPLL_LPBYPASS || + v == OMAP3XXX_EN_DPLL_FRBYPASS) + clk_reparent(clk, dd->clk_bypass); + } else if (cpu_is_omap44xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) + clk_reparent(clk, dd->clk_bypass); + } + return; +} + /** * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware * @clk: struct clk * @@ -149,6 +181,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n) * clockdomain pointer, and save it into the struct clk. Intended to be * called during clk_register(). No return value. */ +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ void omap2_init_clk_clkdm(struct clk *clk) { struct clockdomain *clkdm; @@ -166,6 +199,7 @@ void omap2_init_clk_clkdm(struct clk *clk) "clkdm %s\n", clk->name, clk->clkdm_name); } } +#endif /** * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware @@ -247,6 +281,11 @@ u32 omap2_get_dpll_rate(struct clk *clk) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return dd->clk_bypass->rate; + } else if (cpu_is_omap44xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) + return dd->clk_bypass->rate; } v = __raw_readl(dd->mult_div1_reg); @@ -437,8 +476,10 @@ void omap2_clk_disable(struct clk *clk) _omap2_clk_disable(clk); if (clk->parent) omap2_clk_disable(clk->parent); +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); +#endif } } @@ -448,8 +489,10 @@ int omap2_clk_enable(struct clk *clk) int ret = 0; if (clk->usecount++ == 0) { +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_enable(clk->clkdm, clk); +#endif if (clk->parent) { ret = omap2_clk_enable(clk->parent); @@ -468,8 +511,10 @@ int omap2_clk_enable(struct clk *clk) return ret; err: +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); +#endif clk->usecount--; return ret; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 43b6bedaafd6..93c48df3b5b1 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -1,8 +1,8 @@ /* * linux/arch/arm/mach-omap2/clock.h * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation * * Contacts: * Richard Woodruff <r-woodruff2@ti.com> @@ -36,6 +36,17 @@ #define OMAP3XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP3XXX_EN_DPLL_LOCKED 0x7 +/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */ +#define OMAP4XXX_EN_DPLL_MNBYPASS 0x4 +#define OMAP4XXX_EN_DPLL_LPBYPASS 0x5 +#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 +#define OMAP4XXX_EN_DPLL_LOCKED 0x7 + +/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ +#define DPLL_LOW_POWER_STOP 0x1 +#define DPLL_LOW_POWER_BYPASS 0x5 +#define DPLL_LOCKED 0x7 + int omap2_clk_init(void); int omap2_clk_enable(struct clk *clk); void omap2_clk_disable(struct clk *clk); @@ -44,6 +55,14 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate); int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent); int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance); long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate); +unsigned long omap3_dpll_recalc(struct clk *clk); +unsigned long omap3_clkoutx2_recalc(struct clk *clk); +void omap3_dpll_allow_idle(struct clk *clk); +void omap3_dpll_deny_idle(struct clk *clk); +u32 omap3_dpll_autoidle_read(struct clk *clk); +int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); +int omap3_noncore_dpll_enable(struct clk *clk); +void omap3_noncore_dpll_disable(struct clk *clk); #ifdef CONFIG_OMAP_RESET_CLOCKS void omap2_clk_disable_unused(struct clk *clk); @@ -63,6 +82,7 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk); long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate); int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); +void omap2_init_dpll_parent(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); int omap2_dflt_clk_enable(struct clk *clk); @@ -72,29 +92,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, u8 *idlest_bit); +extern u8 cpu_mask; + extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; -extern u8 cpu_mask; +extern struct clk_functions omap2_clk_functions; +extern struct clk *vclk, *sclk; -/* clksel_rate data common to 24xx/343x */ -static const struct clksel_rate gpt_32k_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate gpt_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate gfx_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 0 } -}; +extern const struct clksel_rate gpt_32k_rates[]; +extern const struct clksel_rate gpt_sys_rates[]; +extern const struct clksel_rate gfx_l3_rates[]; #endif diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c deleted file mode 100644 index e70e7e000eaa..000000000000 --- a/arch/arm/mach-omap2/clock24xx.c +++ /dev/null @@ -1,805 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/clock.c - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/cpufreq.h> -#include <linux/bitops.h> - -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/prcm.h> -#include <asm/div64.h> -#include <asm/clkdev.h> - -#include <plat/sdrc.h> -#include "clock.h" -#include "prm.h" -#include "prm-regbits-24xx.h" -#include "cm.h" -#include "cm-regbits-24xx.h" - -static const struct clkops clkops_oscck; -static const struct clkops clkops_fixed; - -static void omap2430_clk_i2chs_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); - -/* 2430 I2CHS has non-standard IDLEST register */ -static const struct clkops clkops_omap2430_i2chs_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap2430_clk_i2chs_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -#include "clock24xx.h" - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_243X RATE_IN_243X -#define CK_242X RATE_IN_242X - -static struct omap_clk omap24xx_clks[] = { - /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), - CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), - CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), - CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), - /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), - /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), - CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), - CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), - CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), - CLK(NULL, "emul_ck", &emul_ck, CK_242X), - /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), - /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), - CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), - CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), - CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), - CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), - CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), - /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), - /* Modem domain clocks */ - CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), - CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), - /* DSS domain clocks */ - CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), - CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), - /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), - /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), - /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), - /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), - CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), - CLK(NULL, "icr_ick", &icr_ick, CK_243X), - CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), - CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), - CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), - CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), - CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), - CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), - CLK(NULL, "eac_ick", &eac_ick, CK_242X), - CLK(NULL, "eac_fck", &eac_fck, CK_242X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), - CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), - CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), - CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), - CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), - CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), - CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), - CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), - CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), - CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), - CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), - CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), - CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), - CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), - CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), - CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), - CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), - CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), - CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), -}; - -/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ -#define EN_APLL_STOPPED 0 -#define EN_APLL_LOCKED 3 - -/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ -#define APLLS_CLKIN_19_2MHZ 0 -#define APLLS_CLKIN_13MHZ 2 -#define APLLS_CLKIN_12MHZ 3 - -/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ - -static struct prcm_config *curr_prcm_set; -static struct clk *vclk; -static struct clk *sclk; - -static void __iomem *prcm_clksrc_ctrl; - -/*------------------------------------------------------------------------- - * Omap24xx specific clock functions - *-------------------------------------------------------------------------*/ - -/** - * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * - * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the - * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function - * passes back the correct CM_IDLEST register address for I2CHS - * modules. No return value. - */ -static void omap2430_clk_i2chs_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit) -{ - *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); - *idlest_bit = clk->enable_bit; -} - - -/** - * omap2xxx_clk_get_core_rate - return the CORE_CLK rate - * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") - * - * Returns the CORE_CLK rate. CORE_CLK can have one of three rate - * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz - * (the latter is unusual). This currently should be called with - * struct clk *dpll_ck, which is a composite clock of dpll_ck and - * core_ck. - */ -static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) -{ - long long core_clk; - u32 v; - - core_clk = omap2_get_dpll_rate(clk); - - v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - v &= OMAP24XX_CORE_CLK_SRC_MASK; - - if (v == CORE_CLK_SRC_32K) - core_clk = 32768; - else - core_clk *= v; - - return core_clk; -} - -static int omap2_enable_osc_ck(struct clk *clk) -{ - u32 pcc; - - pcc = __raw_readl(prcm_clksrc_ctrl); - - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); - - return 0; -} - -static void omap2_disable_osc_ck(struct clk *clk) -{ - u32 pcc; - - pcc = __raw_readl(prcm_clksrc_ctrl); - - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); -} - -static const struct clkops clkops_oscck = { - .enable = &omap2_enable_osc_ck, - .disable = &omap2_disable_osc_ck, -}; - -#ifdef OLD_CK -/* Recalculate SYST_CLK */ -static void omap2_sys_clk_recalc(struct clk * clk) -{ - u32 div = PRCM_CLKSRC_CTRL; - div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ - div >>= clk->rate_offset; - clk->rate = (clk->parent->rate / div); - propagate_rate(clk); -} -#endif /* OLD_CK */ - -/* Enable an APLL if off */ -static int omap2_clk_fixed_enable(struct clk *clk) -{ - u32 cval, apll_mask; - - apll_mask = EN_APLL_LOCKED << clk->enable_bit; - - cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); - - if ((cval & apll_mask) == apll_mask) - return 0; /* apll already enabled */ - - cval &= ~apll_mask; - cval |= apll_mask; - cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); - - if (clk == &apll96_ck) - cval = OMAP24XX_ST_96M_APLL; - else if (clk == &apll54_ck) - cval = OMAP24XX_ST_54M_APLL; - - omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, - clk->name); - - /* - * REVISIT: Should we return an error code if omap2_wait_clock_ready() - * fails? - */ - return 0; -} - -/* Stop APLL */ -static void omap2_clk_fixed_disable(struct clk *clk) -{ - u32 cval; - - cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); - cval &= ~(EN_APLL_LOCKED << clk->enable_bit); - cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); -} - -static const struct clkops clkops_fixed = { - .enable = &omap2_clk_fixed_enable, - .disable = &omap2_clk_fixed_disable, -}; - -/* - * Uses the current prcm set to tell if a rate is valid. - * You can go slower, but not faster within a given rate set. - */ -static long omap2_dpllcore_round_rate(unsigned long target_rate) -{ - u32 high, low, core_clk_src; - - core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; - - if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ - high = curr_prcm_set->dpll_speed * 2; - low = curr_prcm_set->dpll_speed; - } else { /* DPLL clockout x 2 */ - high = curr_prcm_set->dpll_speed; - low = curr_prcm_set->dpll_speed / 2; - } - -#ifdef DOWN_VARIABLE_DPLL - if (target_rate > high) - return high; - else - return target_rate; -#else - if (target_rate > low) - return high; - else - return low; -#endif - -} - -static unsigned long omap2_dpllcore_recalc(struct clk *clk) -{ - return omap2xxx_clk_get_core_rate(clk); -} - -static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) -{ - u32 cur_rate, low, mult, div, valid_rate, done_rate; - u32 bypass = 0; - struct prcm_config tmpset; - const struct dpll_data *dd; - - cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); - mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - mult &= OMAP24XX_CORE_CLK_SRC_MASK; - - if ((rate == (cur_rate / 2)) && (mult == 2)) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); - } else if ((rate == (cur_rate * 2)) && (mult == 1)) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - } else if (rate != cur_rate) { - valid_rate = omap2_dpllcore_round_rate(rate); - if (valid_rate != rate) - return -EINVAL; - - if (mult == 1) - low = curr_prcm_set->dpll_speed; - else - low = curr_prcm_set->dpll_speed / 2; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); - tmpset.cm_clksel1_pll &= ~(dd->mult_mask | - dd->div1_mask); - div = ((curr_prcm_set->xtal_speed / 1000000) - 1); - tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; - if (rate > low) { - tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; - mult = ((rate / 2) / 1000000); - done_rate = CORE_CLK_SRC_DPLL_X2; - } else { - tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL; - mult = (rate / 1000000); - done_rate = CORE_CLK_SRC_DPLL; - } - tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask)); - tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask)); - - /* Worst case */ - tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS; - - if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ - bypass = 1; - - /* For omap2xxx_sdrc_init_params() */ - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - - /* Force dll lock mode */ - omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, - bypass); - - /* Errata: ret dll entry state */ - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); - omap2xxx_sdrc_reprogram(done_rate, 0); - } - - return 0; -} - -/** - * omap2_table_mpu_recalc - just return the MPU speed - * @clk: virt_prcm_set struct clk - * - * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. - */ -static unsigned long omap2_table_mpu_recalc(struct clk *clk) -{ - return curr_prcm_set->mpu_speed; -} - -/* - * Look for a rate equal or less than the target rate given a configuration set. - * - * What's not entirely clear is "which" field represents the key field. - * Some might argue L3-DDR, others ARM, others IVA. This code is simple and - * just uses the ARM rates. - */ -static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) -{ - struct prcm_config *ptr; - long highest_rate; - - if (clk != &virt_prcm_set) - return -EINVAL; - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->mpu_speed; ptr++) { - if (!(ptr->flags & cpu_mask)) - continue; - if (ptr->xtal_speed != sys_ck.rate) - continue; - - highest_rate = ptr->mpu_speed; - - /* Can check only after xtal frequency check */ - if (ptr->mpu_speed <= rate) - break; - } - return highest_rate; -} - -/* Sets basic clocks based on the specified rate */ -static int omap2_select_table_rate(struct clk *clk, unsigned long rate) -{ - u32 cur_rate, done_rate, bypass = 0, tmp; - struct prcm_config *prcm; - unsigned long found_speed = 0; - unsigned long flags; - - if (clk != &virt_prcm_set) - return -EINVAL; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - - if (prcm->xtal_speed != sys_ck.rate) - continue; - - if (prcm->mpu_speed <= rate) { - found_speed = prcm->mpu_speed; - break; - } - } - - if (!found_speed) { - printk(KERN_INFO "Could not set MPU rate to %luMHz\n", - rate / 1000000); - return -EINVAL; - } - - curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); - - if (prcm->dpll_speed == cur_rate / 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); - } else if (prcm->dpll_speed == cur_rate * 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - } else if (prcm->dpll_speed != cur_rate) { - local_irq_save(flags); - - if (prcm->dpll_speed == prcm->xtal_speed) - bypass = 1; - - if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == - CORE_CLK_SRC_DPLL_X2) - done_rate = CORE_CLK_SRC_DPLL_X2; - else - done_rate = CORE_CLK_SRC_DPLL; - - /* MPU divider */ - cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); - - /* dsp + iva1 div(2420), iva2.1(2430) */ - cm_write_mod_reg(prcm->cm_clksel_dsp, - OMAP24XX_DSP_MOD, CM_CLKSEL); - - cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); - - /* Major subsystem dividers */ - tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, - CM_CLKSEL1); - - if (cpu_is_omap2430()) - cm_write_mod_reg(prcm->cm_clksel_mdm, - OMAP2430_MDM_MOD, CM_CLKSEL); - - /* x2 to enter omap2xxx_sdrc_init_params() */ - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - - omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, - bypass); - - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); - omap2xxx_sdrc_reprogram(done_rate, 0); - - local_irq_restore(flags); - } - - return 0; -} - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - */ -static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - struct prcm_config *prcm; - int i = 0; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - if (i == 0) { - printk(KERN_WARNING "%s: failed to initialize frequency " - "table\n", __func__); - return; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} -#endif - -static struct clk_functions omap2_clk_functions = { - .clk_enable = omap2_clk_enable, - .clk_disable = omap2_clk_disable, - .clk_round_rate = omap2_clk_round_rate, - .clk_set_rate = omap2_clk_set_rate, - .clk_set_parent = omap2_clk_set_parent, - .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, -#endif -}; - -static u32 omap2_get_apll_clkin(void) -{ - u32 aplls, srate = 0; - - aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); - aplls &= OMAP24XX_APLLS_CLKIN_MASK; - aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; - - if (aplls == APLLS_CLKIN_19_2MHZ) - srate = 19200000; - else if (aplls == APLLS_CLKIN_13MHZ) - srate = 13000000; - else if (aplls == APLLS_CLKIN_12MHZ) - srate = 12000000; - - return srate; -} - -static u32 omap2_get_sysclkdiv(void) -{ - u32 div; - - div = __raw_readl(prcm_clksrc_ctrl); - div &= OMAP_SYSCLKDIV_MASK; - div >>= OMAP_SYSCLKDIV_SHIFT; - - return div; -} - -static unsigned long omap2_osc_clk_recalc(struct clk *clk) -{ - return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); -} - -static unsigned long omap2_sys_clk_recalc(struct clk *clk) -{ - return clk->parent->rate / omap2_get_sysclkdiv(); -} - -/* - * Set clocks for bypass mode for reboot to work. - */ -void omap2_clk_prepare_for_reboot(void) -{ - u32 rate; - - if (vclk == NULL || sclk == NULL) - return; - - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); -} - -/* - * Switch the MPU rate if specified on cmdline. - * We cannot do this early until cmdline is parsed. - */ -static int __init omap2_clk_arch_init(void) -{ - if (!mpurate) - return -EINVAL; - - if (clk_set_rate(&virt_prcm_set, mpurate)) - printk(KERN_ERR "Could not find matching MPU rate\n"); - - recalculate_root_clocks(); - - printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - return 0; -} -arch_initcall(omap2_clk_arch_init); - -int __init omap2_clk_init(void) -{ - struct prcm_config *prcm; - struct omap_clk *c; - u32 clkrate; - - if (cpu_is_omap242x()) { - prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; - cpu_mask = RATE_IN_242X; - } else if (cpu_is_omap2430()) { - prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; - cpu_mask = RATE_IN_243X; - } - - clk_init(&omap2_clk_functions); - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_preinit(c->lk.clk); - - osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); - propagate_rate(&osc_ck); - sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); - propagate_rate(&sys_ck); - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - omap2_init_clk_clkdm(c->lk.clk); - } - - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; - - recalculate_root_clocks(); - - printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable_init_clocks(); - - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - - return 0; -} diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c new file mode 100644 index 000000000000..d0e3fb7f9298 --- /dev/null +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -0,0 +1,587 @@ +/* + * linux/arch/arm/mach-omap2/clock.c + * + * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2004-2008 Nokia Corporation + * + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley + * + * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, + * Gordon McNutt and RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/cpufreq.h> +#include <linux/bitops.h> + +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/prcm.h> +#include <plat/clkdev_omap.h> +#include <asm/div64.h> +#include <asm/clkdev.h> + +#include <plat/sdrc.h> +#include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" + + +/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ +#define EN_APLL_STOPPED 0 +#define EN_APLL_LOCKED 3 + +/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ +#define APLLS_CLKIN_19_2MHZ 0 +#define APLLS_CLKIN_13MHZ 2 +#define APLLS_CLKIN_12MHZ 3 + +/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ + +const struct prcm_config *curr_prcm_set; +const struct prcm_config *rate_table; + +struct clk *vclk, *sclk, *dclk; + +void __iomem *prcm_clksrc_ctrl; + +/*------------------------------------------------------------------------- + * Omap24xx specific clock functions + *-------------------------------------------------------------------------*/ + +/** + * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the + * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function + * passes back the correct CM_IDLEST register address for I2CHS + * modules. No return value. + */ +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); + *idlest_bit = clk->enable_bit; +} + +/* 2430 I2CHS has non-standard IDLEST register */ +const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +/** + * omap2xxx_clk_get_core_rate - return the CORE_CLK rate + * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") + * + * Returns the CORE_CLK rate. CORE_CLK can have one of three rate + * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz + * (the latter is unusual). This currently should be called with + * struct clk *dpll_ck, which is a composite clock of dpll_ck and + * core_ck. + */ +unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) +{ + long long core_clk; + u32 v; + + core_clk = omap2_get_dpll_rate(clk); + + v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + v &= OMAP24XX_CORE_CLK_SRC_MASK; + + if (v == CORE_CLK_SRC_32K) + core_clk = 32768; + else + core_clk *= v; + + return core_clk; +} + +static int omap2_enable_osc_ck(struct clk *clk) +{ + u32 pcc; + + pcc = __raw_readl(prcm_clksrc_ctrl); + + __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + + return 0; +} + +static void omap2_disable_osc_ck(struct clk *clk) +{ + u32 pcc; + + pcc = __raw_readl(prcm_clksrc_ctrl); + + __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); +} + +const struct clkops clkops_oscck = { + .enable = omap2_enable_osc_ck, + .disable = omap2_disable_osc_ck, +}; + +#ifdef OLD_CK +/* Recalculate SYST_CLK */ +static void omap2_sys_clk_recalc(struct clk *clk) +{ + u32 div = PRCM_CLKSRC_CTRL; + div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ + div >>= clk->rate_offset; + clk->rate = (clk->parent->rate / div); + propagate_rate(clk); +} +#endif /* OLD_CK */ + +/* Enable an APLL if off */ +static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) +{ + u32 cval, apll_mask; + + apll_mask = EN_APLL_LOCKED << clk->enable_bit; + + cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); + + if ((cval & apll_mask) == apll_mask) + return 0; /* apll already enabled */ + + cval &= ~apll_mask; + cval |= apll_mask; + cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); + + omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask, + clk->name); + + /* + * REVISIT: Should we return an error code if omap2_wait_clock_ready() + * fails? + */ + return 0; +} + +static int omap2_clk_apll96_enable(struct clk *clk) +{ + return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL); +} + +static int omap2_clk_apll54_enable(struct clk *clk) +{ + return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL); +} + +/* Stop APLL */ +static void omap2_clk_apll_disable(struct clk *clk) +{ + u32 cval; + + cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); + cval &= ~(EN_APLL_LOCKED << clk->enable_bit); + cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); +} + +const struct clkops clkops_apll96 = { + .enable = omap2_clk_apll96_enable, + .disable = omap2_clk_apll_disable, +}; + +const struct clkops clkops_apll54 = { + .enable = omap2_clk_apll54_enable, + .disable = omap2_clk_apll_disable, +}; + +/* + * Uses the current prcm set to tell if a rate is valid. + * You can go slower, but not faster within a given rate set. + */ +long omap2_dpllcore_round_rate(unsigned long target_rate) +{ + u32 high, low, core_clk_src; + + core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; + + if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ + high = curr_prcm_set->dpll_speed * 2; + low = curr_prcm_set->dpll_speed; + } else { /* DPLL clockout x 2 */ + high = curr_prcm_set->dpll_speed; + low = curr_prcm_set->dpll_speed / 2; + } + +#ifdef DOWN_VARIABLE_DPLL + if (target_rate > high) + return high; + else + return target_rate; +#else + if (target_rate > low) + return high; + else + return low; +#endif + +} + +unsigned long omap2_dpllcore_recalc(struct clk *clk) +{ + return omap2xxx_clk_get_core_rate(clk); +} + +int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, low, mult, div, valid_rate, done_rate; + u32 bypass = 0; + struct prcm_config tmpset; + const struct dpll_data *dd; + + cur_rate = omap2xxx_clk_get_core_rate(dclk); + mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + mult &= OMAP24XX_CORE_CLK_SRC_MASK; + + if ((rate == (cur_rate / 2)) && (mult == 2)) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); + } else if ((rate == (cur_rate * 2)) && (mult == 1)) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + } else if (rate != cur_rate) { + valid_rate = omap2_dpllcore_round_rate(rate); + if (valid_rate != rate) + return -EINVAL; + + if (mult == 1) + low = curr_prcm_set->dpll_speed; + else + low = curr_prcm_set->dpll_speed / 2; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); + tmpset.cm_clksel1_pll &= ~(dd->mult_mask | + dd->div1_mask); + div = ((curr_prcm_set->xtal_speed / 1000000) - 1); + tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; + if (rate > low) { + tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; + mult = ((rate / 2) / 1000000); + done_rate = CORE_CLK_SRC_DPLL_X2; + } else { + tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL; + mult = (rate / 1000000); + done_rate = CORE_CLK_SRC_DPLL; + } + tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask)); + tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask)); + + /* Worst case */ + tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS; + + if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ + bypass = 1; + + /* For omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + + /* Force dll lock mode */ + omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, + bypass); + + /* Errata: ret dll entry state */ + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); + } + + return 0; +} + +/** + * omap2_table_mpu_recalc - just return the MPU speed + * @clk: virt_prcm_set struct clk + * + * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. + */ +unsigned long omap2_table_mpu_recalc(struct clk *clk) +{ + return curr_prcm_set->mpu_speed; +} + +/* + * Look for a rate equal or less than the target rate given a configuration set. + * + * What's not entirely clear is "which" field represents the key field. + * Some might argue L3-DDR, others ARM, others IVA. This code is simple and + * just uses the ARM rates. + */ +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) +{ + const struct prcm_config *ptr; + long highest_rate; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->mpu_speed; ptr++) { + if (!(ptr->flags & cpu_mask)) + continue; + if (ptr->xtal_speed != sys_ck_rate) + continue; + + highest_rate = ptr->mpu_speed; + + /* Can check only after xtal frequency check */ + if (ptr->mpu_speed <= rate) + break; + } + return highest_rate; +} + +/* Sets basic clocks based on the specified rate */ +int omap2_select_table_rate(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, done_rate, bypass = 0, tmp; + const struct prcm_config *prcm; + unsigned long found_speed = 0; + unsigned long flags; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + + if (prcm->xtal_speed != sys_ck_rate) + continue; + + if (prcm->mpu_speed <= rate) { + found_speed = prcm->mpu_speed; + break; + } + } + + if (!found_speed) { + printk(KERN_INFO "Could not set MPU rate to %luMHz\n", + rate / 1000000); + return -EINVAL; + } + + curr_prcm_set = prcm; + cur_rate = omap2xxx_clk_get_core_rate(dclk); + + if (prcm->dpll_speed == cur_rate / 2) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); + } else if (prcm->dpll_speed == cur_rate * 2) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + } else if (prcm->dpll_speed != cur_rate) { + local_irq_save(flags); + + if (prcm->dpll_speed == prcm->xtal_speed) + bypass = 1; + + if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == + CORE_CLK_SRC_DPLL_X2) + done_rate = CORE_CLK_SRC_DPLL_X2; + else + done_rate = CORE_CLK_SRC_DPLL; + + /* MPU divider */ + cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); + + /* dsp + iva1 div(2420), iva2.1(2430) */ + cm_write_mod_reg(prcm->cm_clksel_dsp, + OMAP24XX_DSP_MOD, CM_CLKSEL); + + cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); + + /* Major subsystem dividers */ + tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; + cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, + CM_CLKSEL1); + + if (cpu_is_omap2430()) + cm_write_mod_reg(prcm->cm_clksel_mdm, + OMAP2430_MDM_MOD, CM_CLKSEL); + + /* x2 to enter omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + + omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, + bypass); + + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); + + local_irq_restore(flags); + } + + return 0; +} + +#ifdef CONFIG_CPU_FREQ +/* + * Walk PRCM rate table and fillout cpufreq freq_table + */ +static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; + +void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) +{ + struct prcm_config *prcm; + int i = 0; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + freq_table[i].index = i; + freq_table[i].frequency = prcm->mpu_speed / 1000; + i++; + } + + if (i == 0) { + printk(KERN_WARNING "%s: failed to initialize frequency " + "table\n", __func__); + return; + } + + freq_table[i].index = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *table = &freq_table[0]; +} +#endif + +struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +#ifdef CONFIG_CPU_FREQ + .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, +#endif +}; + +static u32 omap2_get_apll_clkin(void) +{ + u32 aplls, srate = 0; + + aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); + aplls &= OMAP24XX_APLLS_CLKIN_MASK; + aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; + + if (aplls == APLLS_CLKIN_19_2MHZ) + srate = 19200000; + else if (aplls == APLLS_CLKIN_13MHZ) + srate = 13000000; + else if (aplls == APLLS_CLKIN_12MHZ) + srate = 12000000; + + return srate; +} + +static u32 omap2_get_sysclkdiv(void) +{ + u32 div; + + div = __raw_readl(prcm_clksrc_ctrl); + div &= OMAP_SYSCLKDIV_MASK; + div >>= OMAP_SYSCLKDIV_SHIFT; + + return div; +} + +unsigned long omap2_osc_clk_recalc(struct clk *clk) +{ + return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); +} + +unsigned long omap2_sys_clk_recalc(struct clk *clk) +{ + return clk->parent->rate / omap2_get_sysclkdiv(); +} + +/* + * Set clocks for bypass mode for reboot to work. + */ +void omap2_clk_prepare_for_reboot(void) +{ + u32 rate; + + if (vclk == NULL || sclk == NULL) + return; + + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); +} + +/* + * Switch the MPU rate if specified on cmdline. + * We cannot do this early until cmdline is parsed. + */ +static int __init omap2_clk_arch_init(void) +{ + struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck; + unsigned long sys_ck_rate; + + if (!mpurate) + return -EINVAL; + + virt_prcm_set = clk_get(NULL, "virt_prcm_set"); + sys_ck = clk_get(NULL, "sys_ck"); + dpll_ck = clk_get(NULL, "dpll_ck"); + mpu_ck = clk_get(NULL, "mpu_ck"); + + if (clk_set_rate(virt_prcm_set, mpurate)) + printk(KERN_ERR "Could not find matching MPU rate\n"); + + recalculate_root_clocks(); + + sys_ck_rate = clk_get_rate(sys_ck); + + pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10, + (clk_get_rate(dpll_ck) / 1000000), + (clk_get_rate(mpu_ck) / 1000000)); + + return 0; +} +arch_initcall(omap2_clk_arch_init); + + diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h new file mode 100644 index 000000000000..e35efde4bd80 --- /dev/null +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -0,0 +1,41 @@ +/* + * OMAP2 clock function prototypes and macros + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H + +unsigned long omap2_table_mpu_recalc(struct clk *clk); +int omap2_select_table_rate(struct clk *clk, unsigned long rate); +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); +unsigned long omap2_sys_clk_recalc(struct clk *clk); +unsigned long omap2_osc_clk_recalc(struct clk *clk); +unsigned long omap2_sys_clk_recalc(struct clk *clk); +unsigned long omap2_dpllcore_recalc(struct clk *clk); +int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); +unsigned long omap2xxx_clk_get_core_rate(struct clk *clk); + +/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ +#ifdef CONFIG_ARCH_OMAP2420 +#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL +#else +#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL +#endif + +extern void __iomem *prcm_clksrc_ctrl; + +extern struct clk *dclk; + +extern const struct clkops clkops_omap2430_i2chs_wait; +extern const struct clkops clkops_oscck; +extern const struct clkops clkops_apll96; +extern const struct clkops clkops_apll54; + +#endif diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock2xxx_data.c index d19cf7a7d8db..97dc7cf7751d 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock2xxx_data.c @@ -1,8 +1,8 @@ /* - * linux/arch/arm/mach-omap2/clock24xx.h + * linux/arch/arm/mach-omap2/clock2xxx_data.c * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation * * Contacts: * Richard Woodruff <r-woodruff2@ti.com> @@ -13,600 +13,21 @@ * published by the Free Software Foundation. */ -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/clk.h> -#include "clock.h" +#include <plat/clkdev_omap.h> +#include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" #include "prm.h" #include "cm.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" -/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ -#ifdef CONFIG_ARCH_OMAP2420 -#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL -#else -#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL -#endif - -static unsigned long omap2_table_mpu_recalc(struct clk *clk); -static int omap2_select_table_rate(struct clk *clk, unsigned long rate); -static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); -static unsigned long omap2_sys_clk_recalc(struct clk *clk); -static unsigned long omap2_osc_clk_recalc(struct clk *clk); -static unsigned long omap2_sys_clk_recalc(struct clk *clk); -static unsigned long omap2_dpllcore_recalc(struct clk *clk); -static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); - -/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP - * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM - */ -struct prcm_config { - unsigned long xtal_speed; /* crystal rate */ - unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ - unsigned long mpu_speed; /* speed of MPU */ - unsigned long cm_clksel_mpu; /* mpu divider */ - unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ - unsigned long cm_clksel_gfx; /* gfx dividers */ - unsigned long cm_clksel1_core; /* major subsystem dividers */ - unsigned long cm_clksel1_pll; /* m,n */ - unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ - unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ - unsigned long base_sdrc_rfr; /* base refresh timing for a set */ - unsigned char flags; -}; - -/* - * The OMAP2 processor can be run at several discrete 'PRCM configurations'. - * These configurations are characterized by voltage and speed for clocks. - * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with - * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. - * - * 2430 differs from 2420 in that there are no more phase synchronizers used. - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs - * 2430 (iva2.1, NOdsp, mdm) - */ - -/* Core fields for cm_clksel, not ratio governed */ -#define RX_CLKSEL_DSS1 (0x10 << 8) -#define RX_CLKSEL_DSS2 (0x0 << 13) -#define RX_CLKSEL_SSI (0x5 << 20) - -/*------------------------------------------------------------------------- - * Voltage/DPLL ratios - *-------------------------------------------------------------------------*/ - -/* 2430 Ratio's, 2430-Ratio Config 1 */ -#define R1_CLKSEL_L3 (4 << 0) -#define R1_CLKSEL_L4 (2 << 5) -#define R1_CLKSEL_USB (4 << 25) -#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R1_CLKSEL_L4 | R1_CLKSEL_L3 -#define R1_CLKSEL_MPU (2 << 0) -#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU -#define R1_CLKSEL_DSP (2 << 0) -#define R1_CLKSEL_DSP_IF (2 << 5) -#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF -#define R1_CLKSEL_GFX (2 << 0) -#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX -#define R1_CLKSEL_MDM (4 << 0) -#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM - -/* 2430-Ratio Config 2 */ -#define R2_CLKSEL_L3 (6 << 0) -#define R2_CLKSEL_L4 (2 << 5) -#define R2_CLKSEL_USB (2 << 25) -#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R2_CLKSEL_L4 | R2_CLKSEL_L3 -#define R2_CLKSEL_MPU (2 << 0) -#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU -#define R2_CLKSEL_DSP (2 << 0) -#define R2_CLKSEL_DSP_IF (3 << 5) -#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF -#define R2_CLKSEL_GFX (2 << 0) -#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX -#define R2_CLKSEL_MDM (6 << 0) -#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM - -/* 2430-Ratio Bootm (BYPASS) */ -#define RB_CLKSEL_L3 (1 << 0) -#define RB_CLKSEL_L4 (1 << 5) -#define RB_CLKSEL_USB (1 << 25) -#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RB_CLKSEL_L4 | RB_CLKSEL_L3 -#define RB_CLKSEL_MPU (1 << 0) -#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU -#define RB_CLKSEL_DSP (1 << 0) -#define RB_CLKSEL_DSP_IF (1 << 5) -#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF -#define RB_CLKSEL_GFX (1 << 0) -#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX -#define RB_CLKSEL_MDM (1 << 0) -#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM - -/* 2420 Ratio Equivalents */ -#define RXX_CLKSEL_VLYNQ (0x12 << 15) -#define RXX_CLKSEL_SSI (0x8 << 20) - -/* 2420-PRCM III 532MHz core */ -#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ -#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ -#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ -#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ - RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ - RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ - RIII_CLKSEL_L3 -#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ -#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU -#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ -#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ -#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ -#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ -#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ -#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ - RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ - RIII_CLKSEL_DSP -#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ -#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX - -/* 2420-PRCM II 600MHz core */ -#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ -#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ -#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ -#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RII_CLKSEL_L4 | RII_CLKSEL_L3 -#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ -#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU -#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ -#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ -#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ -#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ -#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ - RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ - RII_CLKSEL_DSP -#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ -#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX - -/* 2420-PRCM I 660MHz core */ -#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ -#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ -#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ -#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RI_CLKSEL_L4 | RI_CLKSEL_L3 -#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ -#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU -#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ -#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ -#define RI_SYNC_DSP (1 << 7) /* Activate sync */ -#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ -#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \ - RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ - RI_CLKSEL_DSP -#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ -#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX - -/* 2420-PRCM VII (boot) */ -#define RVII_CLKSEL_L3 (1 << 0) -#define RVII_CLKSEL_L4 (1 << 5) -#define RVII_CLKSEL_DSS1 (1 << 8) -#define RVII_CLKSEL_DSS2 (0 << 13) -#define RVII_CLKSEL_VLYNQ (1 << 15) -#define RVII_CLKSEL_SSI (1 << 20) -#define RVII_CLKSEL_USB (1 << 25) - -#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ - RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ - RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 - -#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ -#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU - -#define RVII_CLKSEL_DSP (1 << 0) -#define RVII_CLKSEL_DSP_IF (1 << 5) -#define RVII_SYNC_DSP (0 << 7) -#define RVII_CLKSEL_IVA (1 << 8) -#define RVII_SYNC_IVA (0 << 13) -#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ - RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP - -#define RVII_CLKSEL_GFX (1 << 0) -#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX - -/*------------------------------------------------------------------------- - * 2430 Target modes: Along with each configuration the CPU has several - * modes which goes along with them. Modes mainly are the addition of - * describe DPLL combinations to go along with a ratio. - *-------------------------------------------------------------------------*/ - -/* Hardware governed */ -#define MX_48M_SRC (0 << 3) -#define MX_54M_SRC (0 << 5) -#define MX_APLLS_CLIKIN_12 (3 << 23) -#define MX_APLLS_CLIKIN_13 (2 << 23) -#define MX_APLLS_CLIKIN_19_2 (0 << 23) - -/* - * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed - * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz - */ -#define M5A_DPLL_MULT_12 (133 << 12) -#define M5A_DPLL_DIV_12 (5 << 8) -#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5A_DPLL_MULT_13 (61 << 12) -#define M5A_DPLL_DIV_13 (2 << 8) -#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5A_DPLL_MULT_19 (55 << 12) -#define M5A_DPLL_DIV_19 (3 << 8) -#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ -#define M5B_DPLL_MULT_12 (50 << 12) -#define M5B_DPLL_DIV_12 (2 << 8) -#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5B_DPLL_MULT_13 (200 << 12) -#define M5B_DPLL_DIV_13 (12 << 8) - -#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5B_DPLL_MULT_19 (125 << 12) -#define M5B_DPLL_DIV_19 (31 << 8) -#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* - * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz - */ -#define M4_DPLL_MULT_12 (133 << 12) -#define M4_DPLL_DIV_12 (3 << 8) -#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -#define M4_DPLL_MULT_13 (399 << 12) -#define M4_DPLL_DIV_13 (12 << 8) -#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -#define M4_DPLL_MULT_19 (145 << 12) -#define M4_DPLL_DIV_19 (6 << 8) -#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* - * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz - */ -#define M3_DPLL_MULT_12 (55 << 12) -#define M3_DPLL_DIV_12 (1 << 8) -#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M3_DPLL_MULT_13 (76 << 12) -#define M3_DPLL_DIV_13 (2 << 8) -#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M3_DPLL_MULT_19 (17 << 12) -#define M3_DPLL_DIV_19 (0 << 8) -#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* - * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz - */ -#define M2_DPLL_MULT_12 (55 << 12) -#define M2_DPLL_DIV_12 (1 << 8) -#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, - * relock time issue */ -/* Core frequency changed from 330/165 to 329/164 MHz*/ -#define M2_DPLL_MULT_13 (76 << 12) -#define M2_DPLL_DIV_13 (2 << 8) -#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -#define M2_DPLL_MULT_19 (17 << 12) -#define M2_DPLL_DIV_19 (0 << 8) -#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* boot (boot) */ -#define MB_DPLL_MULT (1 << 12) -#define MB_DPLL_DIV (0 << 8) -#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_12 - -#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_13 - -#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_19 - -/* - * 2430 - chassis (sedna) - * 165 (ratio1) same as above #2 - * 150 (ratio1) - * 133 (ratio2) same as above #4 - * 110 (ratio2) same as above #3 - * 104 (ratio2) - * boot (boot) - */ - -/* PRCM I target DPLL = 2*330MHz = 660MHz */ -#define MI_DPLL_MULT_12 (55 << 12) -#define MI_DPLL_DIV_12 (1 << 8) -#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -/* - * 2420 Equivalent - mode registers - * PRCM II , target DPLL = 2*300MHz = 600MHz - */ -#define MII_DPLL_MULT_12 (50 << 12) -#define MII_DPLL_DIV_12 (1 << 8) -#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MII_DPLL_MULT_13 (300 << 12) -#define MII_DPLL_DIV_13 (12 << 8) -#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM III target DPLL = 2*266 = 532MHz*/ -#define MIII_DPLL_MULT_12 (133 << 12) -#define MIII_DPLL_DIV_12 (5 << 8) -#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MIII_DPLL_MULT_13 (266 << 12) -#define MIII_DPLL_DIV_13 (12 << 8) -#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM VII (boot bypass) */ -#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL -#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL - -/* High and low operation value */ -#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) -#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) - -/* MPU speed defines */ -#define S12M 12000000 -#define S13M 13000000 -#define S19M 19200000 -#define S26M 26000000 -#define S100M 100000000 -#define S133M 133000000 -#define S150M 150000000 -#define S164M 164000000 -#define S165M 165000000 -#define S199M 199000000 -#define S200M 200000000 -#define S266M 266000000 -#define S300M 300000000 -#define S329M 329000000 -#define S330M 330000000 -#define S399M 399000000 -#define S400M 400000000 -#define S532M 532000000 -#define S600M 600000000 -#define S658M 658000000 -#define S660M 660000000 -#define S798M 798000000 - -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, - * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, - * CM_CLKSEL2_PLL, CM_CLKSEL_MDM - * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. - * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. - * - * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ -static struct prcm_config rate_table[] = { - /* PRCM I - FAST */ - {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, - RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, - RATE_IN_242X}, - - /* PRCM II - FAST */ - {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - FAST */ - {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM II - SLOW */ - {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - SLOW */ - {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM #4 - ratio2 (ES2.1) - FAST */ - {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - FAST */ - {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - FAST */ - {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - FAST */ - {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM #4 - ratio1 (ES2.1) - SLOW */ - {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - SLOW */ - {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - SLOW */ - {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - SLOW*/ - {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; - /*------------------------------------------------------------------------- * 24xx clock tree. * @@ -708,7 +129,7 @@ static struct clk dpll_ck = { static struct clk apll96_ck = { .name = "apll96_ck", - .ops = &clkops_fixed, + .ops = &clkops_apll96, .parent = &sys_ck, .rate = 96000000, .flags = RATE_FIXED | ENABLE_ON_INIT, @@ -719,7 +140,7 @@ static struct clk apll96_ck = { static struct clk apll54_ck = { .name = "apll54_ck", - .ops = &clkops_fixed, + .ops = &clkops_apll54, .parent = &sys_ck, .rate = 54000000, .flags = RATE_FIXED | ENABLE_ON_INIT, @@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = { .round_rate = &omap2_round_to_table_rate, }; -#endif + +/* + * clkdev integration + */ + +static struct omap_clk omap24xx_clks[] = { + /* external root sources */ + CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), + CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), + CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), + /* internal analog sources */ + CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), + CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), + CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), + /* internal prcm root sources */ + CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), + CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), + CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), + CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), + CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), + CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), + CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), + CLK(NULL, "emul_ck", &emul_ck, CK_242X), + /* mpu domain clocks */ + CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), + /* dsp domain clocks */ + CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), + CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), + CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), + CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + /* GFX domain clocks */ + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), + /* Modem domain clocks */ + CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + /* DSS domain clocks */ + CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), + /* L3 domain clocks */ + CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), + /* L4 domain clocks */ + CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), + /* virtual meta-group clock */ + CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), + /* general l4 interface ck, multi-parent functional clk */ + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), + CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), + CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), + CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), + CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), + CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), + CLK(NULL, "icr_ick", &icr_ick, CK_243X), + CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), + CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), + CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), + CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), + CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), + CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), + CLK(NULL, "eac_ick", &eac_ick, CK_242X), + CLK(NULL, "eac_fck", &eac_fck, CK_242X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), + CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), + CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), + CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), + CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), + CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), + CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), + CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), + CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), + CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), + CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), + CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), + CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), + CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), + CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), +}; + +/* + * init code + */ + +int __init omap2_clk_init(void) +{ + const struct prcm_config *prcm; + struct omap_clk *c; + u32 clkrate; + u16 cpu_clkflg; + + if (cpu_is_omap242x()) { + prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; + cpu_mask = RATE_IN_242X; + cpu_clkflg = CK_242X; + rate_table = omap2420_rate_table; + } else if (cpu_is_omap2430()) { + prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; + cpu_mask = RATE_IN_243X; + cpu_clkflg = CK_243X; + rate_table = omap2430_rate_table; + } + + clk_init(&omap2_clk_functions); + + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_preinit(c->lk.clk); + + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); + propagate_rate(&osc_ck); + sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); + propagate_rate(&sys_ck); + + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + + /* Check the MPU rate set by bootloader */ + clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + dclk = clk_get(NULL, "dpll_ck"); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 9f2feaf79865..ded32364f32b 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -30,314 +30,21 @@ #include <plat/cpu.h> #include <plat/clock.h> #include <plat/sram.h> +#include <plat/sdrc.h> #include <asm/div64.h> #include <asm/clkdev.h> #include <plat/sdrc.h> #include "clock.h" +#include "clock34xx.h" +#include "sdrc.h" #include "prm.h" #include "prm-regbits-34xx.h" #include "cm.h" #include "cm-regbits-34xx.h" -static const struct clkops clkops_noncore_dpll_ops; - -static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); -static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); -static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); - -static const struct clkops clkops_omap3430es2_ssi_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_ssi_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -static const struct clkops clkops_omap3430es2_hsotgusb_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -static const struct clkops clkops_omap3430es2_dss_usbhost_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -#include "clock34xx.h" - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_343X (1 << 0) -#define CK_3430ES1 (1 << 1) -#define CK_3430ES2 (1 << 2) - -static struct omap_clk omap34xx_clks[] = { - CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X), - CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X), - CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X), - CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2), - CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X), - CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X), - CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X), - CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X), - CLK(NULL, "sys_ck", &sys_ck, CK_343X), - CLK(NULL, "sys_altclk", &sys_altclk, CK_343X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X), - CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X), - CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X), - CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X), - CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X), - CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X), - CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X), - CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X), - CLK(NULL, "core_ck", &core_ck, CK_343X), - CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X), - CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X), - CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), - CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), - CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), - CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), - CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), - CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), - CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), - CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X), - CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X), - CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X), - CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X), - CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X), - CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X), - CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X), - CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X), - CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X), - CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X), - CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X), - CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X), - CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), - CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), - CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), - CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), - CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), - CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), - CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X), - CLK(NULL, "corex2_fck", &corex2_fck, CK_343X), - CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), - CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), - CLK(NULL, "arm_fck", &arm_fck, CK_343X), - CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), - CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), - CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), - CLK(NULL, "l3_ick", &l3_ick, CK_343X), - CLK(NULL, "l4_ick", &l4_ick, CK_343X), - CLK(NULL, "rm_ick", &rm_ick, CK_343X), - CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), - CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), - CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), - CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), - CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), - CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), - CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), - CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), - CLK(NULL, "modem_fck", &modem_fck, CK_343X), - CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), - CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), - CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), - CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), - CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), - CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), - CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X), - CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), - CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), - CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), - CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), - CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), - CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), - CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), - CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), - CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), - CLK(NULL, "pka_ick", &pka_ick, CK_343X), - CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), - CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), - CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2), - CLK(NULL, "icr_ick", &icr_ick, CK_343X), - CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), - CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), - CLK(NULL, "des2_ick", &des2_ick, CK_343X), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), - CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), - CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X), - CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X), - CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X), - CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), - CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), - CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), - CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), - CLK("omap_rng", "ick", &rng_ick, CK_343X), - CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), - CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), - CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), - CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), - CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), - CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), - CLK(NULL, "cam_ick", &cam_ick, CK_343X), - CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), - CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), - CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), - CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), - CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), - CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), - CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), - CLK("omap_wdt", "fck", &wdt2_fck, CK_343X), - CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), - CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), - CLK("omap_wdt", "ick", &wdt2_ick, CK_343X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), - CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), - CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X), - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X), - CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X), - CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_343X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X), - CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X), - CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X), - CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X), - CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X), - CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X), - CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X), - CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X), - CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X), - CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X), - CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X), - CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_343X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), - CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X), - CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), - CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), - CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), - CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X), - CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X), - CLK(NULL, "sr1_fck", &sr1_fck, CK_343X), - CLK(NULL, "sr2_fck", &sr2_fck, CK_343X), - CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X), - CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X), -}; - -/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ -#define DPLL_AUTOIDLE_DISABLE 0x0 -#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 - -#define MAX_DPLL_WAIT_TRIES 1000000 - -#define MIN_SDRC_DLL_LOCK_FREQ 83000000 - #define CYCLES_PER_MHZ 1000000 -/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */ -#define SDRC_MPURATE_SCALE 8 - -/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */ -#define SDRC_MPURATE_BASE_SHIFT 9 - -/* - * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at - * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize - */ -#define SDRC_MPURATE_LOOPS 96 - /* * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks * that are sourced by DPLL5, and both of these require this clock @@ -345,6 +52,9 @@ static struct omap_clk omap34xx_clks[] = { */ #define DPLL5_FREQ_FOR_USBHOST 120000000 +/* needed by omap3_core_dpll_m2_set_rate() */ +struct clk *sdrc_ick_p, *arm_fck_p; + /** * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI * @clk: struct clk * being enabled @@ -366,6 +76,13 @@ static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; } +const struct clkops clkops_omap3430es2_ssi_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + /** * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST * @clk: struct clk * being enabled @@ -391,6 +108,13 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; } +const struct clkops clkops_omap3430es2_dss_usbhost_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + /** * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB * @clk: struct clk * being enabled @@ -412,395 +136,19 @@ static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; } -/** - * omap3_dpll_recalc - recalculate DPLL rate - * @clk: DPLL struct clk - * - * Recalculate and propagate the DPLL rate. - */ -static unsigned long omap3_dpll_recalc(struct clk *clk) -{ - return omap2_get_dpll_rate(clk); -} - -/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ -static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits) -{ - const struct dpll_data *dd; - u32 v; - - dd = clk->dpll_data; - - v = __raw_readl(dd->control_reg); - v &= ~dd->enable_mask; - v |= clken_bits << __ffs(dd->enable_mask); - __raw_writel(v, dd->control_reg); -} - -/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ -static int _omap3_wait_dpll_status(struct clk *clk, u8 state) -{ - const struct dpll_data *dd; - int i = 0; - int ret = -EINVAL; - - dd = clk->dpll_data; - - state <<= __ffs(dd->idlest_mask); - - while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) && - i < MAX_DPLL_WAIT_TRIES) { - i++; - udelay(1); - } - - if (i == MAX_DPLL_WAIT_TRIES) { - printk(KERN_ERR "clock: %s failed transition to '%s'\n", - clk->name, (state) ? "locked" : "bypassed"); - } else { - pr_debug("clock: %s transition to '%s' in %d loops\n", - clk->name, (state) ? "locked" : "bypassed", i); - - ret = 0; - } - - return ret; -} - -/* From 3430 TRM ES2 4.7.6.2 */ -static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) -{ - unsigned long fint; - u16 f = 0; - - fint = clk->dpll_data->clk_ref->rate / n; - - pr_debug("clock: fint is %lu\n", fint); - - if (fint >= 750000 && fint <= 1000000) - f = 0x3; - else if (fint > 1000000 && fint <= 1250000) - f = 0x4; - else if (fint > 1250000 && fint <= 1500000) - f = 0x5; - else if (fint > 1500000 && fint <= 1750000) - f = 0x6; - else if (fint > 1750000 && fint <= 2100000) - f = 0x7; - else if (fint > 7500000 && fint <= 10000000) - f = 0xB; - else if (fint > 10000000 && fint <= 12500000) - f = 0xC; - else if (fint > 12500000 && fint <= 15000000) - f = 0xD; - else if (fint > 15000000 && fint <= 17500000) - f = 0xE; - else if (fint > 17500000 && fint <= 21000000) - f = 0xF; - else - pr_debug("clock: unknown freqsel setting for %d\n", n); - - return f; -} - -/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ - -/* - * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report - * readiness before returning. Will save and restore the DPLL's - * autoidle state across the enable, per the CDP code. If the DPLL - * locked successfully, return 0; if the DPLL did not lock in the time - * allotted, or DPLL3 was passed in, return -EINVAL. - */ -static int _omap3_noncore_dpll_lock(struct clk *clk) -{ - u8 ai; - int r; - - if (clk == &dpll3_ck) - return -EINVAL; - - pr_debug("clock: locking DPLL %s\n", clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - omap3_dpll_deny_idle(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOCKED); - - r = _omap3_wait_dpll_status(clk, 1); - - if (ai) - omap3_dpll_allow_idle(clk); - - return r; -} - -/* - * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power bypass mode. In - * bypass mode, the DPLL's rate is set equal to its parent clock's - * rate. Waits for the DPLL to report readiness before returning. - * Will save and restore the DPLL's autoidle state across the enable, - * per the CDP code. If the DPLL entered bypass mode successfully, - * return 0; if the DPLL did not enter bypass in the time allotted, or - * DPLL3 was passed in, or the DPLL does not support low-power bypass, - * return -EINVAL. - */ -static int _omap3_noncore_dpll_bypass(struct clk *clk) -{ - int r; - u8 ai; - - if (clk == &dpll3_ck) - return -EINVAL; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) - return -EINVAL; - - pr_debug("clock: configuring DPLL %s for low-power bypass\n", - clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); - - r = _omap3_wait_dpll_status(clk, 0); - - if (ai) - omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); - - return r; -} - -/* - * _omap3_noncore_dpll_stop - instruct a DPLL to stop - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power stop. Will save and - * restore the DPLL's autoidle state across the stop, per the CDP - * code. If DPLL3 was passed in, or the DPLL does not support - * low-power stop, return -EINVAL; otherwise, return 0. - */ -static int _omap3_noncore_dpll_stop(struct clk *clk) -{ - u8 ai; - - if (clk == &dpll3_ck) - return -EINVAL; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) - return -EINVAL; - - pr_debug("clock: stopping DPLL %s\n", clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); - - if (ai) - omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); - - return 0; -} - -/** - * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. - * The choice of modes depends on the DPLL's programmed rate: if it is - * the same as the DPLL's parent clock, it will enter bypass; - * otherwise, it will enter lock. This code will wait for the DPLL to - * indicate readiness before returning, unless the DPLL takes too long - * to enter the target state. Intended to be used as the struct clk's - * enable function. If DPLL3 was passed in, or the DPLL does not - * support low-power stop, or if the DPLL took too long to enter - * bypass or lock, return -EINVAL; otherwise, return 0. - */ -static int omap3_noncore_dpll_enable(struct clk *clk) -{ - int r; - struct dpll_data *dd; - - if (clk == &dpll3_ck) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (clk->rate == dd->clk_bypass->rate) { - WARN_ON(clk->parent != dd->clk_bypass); - r = _omap3_noncore_dpll_bypass(clk); - } else { - WARN_ON(clk->parent != dd->clk_ref); - r = _omap3_noncore_dpll_lock(clk); - } - /* FIXME: this is dubious - if clk->rate has changed, what about propagating? */ - if (!r) - clk->rate = omap2_get_dpll_rate(clk); - - return r; -} - -/** - * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. - * The choice of modes depends on the DPLL's programmed rate: if it is - * the same as the DPLL's parent clock, it will enter bypass; - * otherwise, it will enter lock. This code will wait for the DPLL to - * indicate readiness before returning, unless the DPLL takes too long - * to enter the target state. Intended to be used as the struct clk's - * enable function. If DPLL3 was passed in, or the DPLL does not - * support low-power stop, or if the DPLL took too long to enter - * bypass or lock, return -EINVAL; otherwise, return 0. - */ -static void omap3_noncore_dpll_disable(struct clk *clk) -{ - if (clk == &dpll3_ck) - return; - - _omap3_noncore_dpll_stop(clk); -} - - -/* Non-CORE DPLL rate set code */ - -/* - * omap3_noncore_dpll_program - set non-core DPLL M,N values directly - * @clk: struct clk * of DPLL to set - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * @freqsel: FREQSEL value to set - * - * Program the DPLL with the supplied M, N values, and wait for the DPLL to - * lock.. Returns -EINVAL upon error, or 0 upon success. - */ -static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) -{ - struct dpll_data *dd = clk->dpll_data; - u32 v; - - /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ - _omap3_noncore_dpll_bypass(clk); - - /* Set jitter correction */ - v = __raw_readl(dd->control_reg); - v &= ~dd->freqsel_mask; - v |= freqsel << __ffs(dd->freqsel_mask); - __raw_writel(v, dd->control_reg); - - /* Set DPLL multiplier, divider */ - v = __raw_readl(dd->mult_div1_reg); - v &= ~(dd->mult_mask | dd->div1_mask); - v |= m << __ffs(dd->mult_mask); - v |= (n - 1) << __ffs(dd->div1_mask); - __raw_writel(v, dd->mult_div1_reg); - - /* We let the clock framework set the other output dividers later */ - - /* REVISIT: Set ramp-up delay? */ - - _omap3_noncore_dpll_lock(clk); - - return 0; -} - -/** - * omap3_noncore_dpll_set_rate - set non-core DPLL rate - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate - * - * Set the DPLL CLKOUT to the target rate. If the DPLL can enter - * low-power bypass, and the target rate is the bypass source clock - * rate, then configure the DPLL for bypass. Otherwise, round the - * target rate if it hasn't been done already, then program and lock - * the DPLL. Returns -EINVAL upon error, or 0 upon success. - */ -static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) -{ - struct clk *new_parent = NULL; - u16 freqsel; - struct dpll_data *dd; - int ret; - - if (!clk || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (rate == omap2_get_dpll_rate(clk)) - return 0; - - /* - * Ensure both the bypass and ref clocks are enabled prior to - * doing anything; we need the bypass clock running to reprogram - * the DPLL. - */ - omap2_clk_enable(dd->clk_bypass); - omap2_clk_enable(dd->clk_ref); - - if (dd->clk_bypass->rate == rate && - (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); - - ret = _omap3_noncore_dpll_bypass(clk); - if (!ret) - new_parent = dd->clk_bypass; - } else { - if (dd->last_rounded_rate != rate) - omap2_dpll_round_rate(clk, rate); - - if (dd->last_rounded_rate == 0) - return -EINVAL; - - freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); - if (!freqsel) - WARN_ON(1); - - pr_debug("clock: %s: set rate: locking rate to %lu.\n", - clk->name, rate); - - ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, - dd->last_rounded_n, freqsel); - if (!ret) - new_parent = dd->clk_ref; - } - if (!ret) { - /* - * Switch the parent clock in the heirarchy, and make sure - * that the new parent's usecount is correct. Note: we - * enable the new parent before disabling the old to avoid - * any unnecessary hardware disable->enable transitions. - */ - if (clk->usecount) { - omap2_clk_enable(new_parent); - omap2_clk_disable(clk->parent); - } - clk_reparent(clk, new_parent); - clk->rate = rate; - } - omap2_clk_disable(dd->clk_ref); - omap2_clk_disable(dd->clk_bypass); +const struct clkops clkops_omap3430es2_hsotgusb_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; - return 0; -} +const struct clkops clkops_noncore_dpll_ops = { + .enable = omap3_noncore_dpll_enable, + .disable = omap3_noncore_dpll_disable, +}; -static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) +int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) { /* * According to the 12-5 CDP code from TI, "Limitation 2.5" @@ -831,12 +179,12 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) * Program the DPLL M2 divider with the rounded target rate. Returns * -EINVAL upon error, or 0 upon success. */ -static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) +int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) { u32 new_div = 0; u32 unlock_dll = 0; u32 c; - unsigned long validrate, sdrcrate, mpurate; + unsigned long validrate, sdrcrate, _mpurate; struct omap_sdrc_params *sdrc_cs0; struct omap_sdrc_params *sdrc_cs1; int ret; @@ -844,14 +192,11 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (!clk || !rate) return -EINVAL; - if (clk != &dpll3_m2_ck) - return -EINVAL; - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); if (validrate != rate) return -EINVAL; - sdrcrate = sdrc_ick.rate; + sdrcrate = sdrc_ick_p->rate; if (rate > clk->rate) sdrcrate <<= ((rate / clk->rate) >> 1); else @@ -869,8 +214,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) /* * XXX This only needs to be done when the CPU frequency changes */ - mpurate = arm_fck.rate / CYCLES_PER_MHZ; - c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; + _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ; + c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; c += 1; /* for safety */ c *= SDRC_MPURATE_LOOPS; c >>= SDRC_MPURATE_SCALE; @@ -906,129 +251,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) return 0; } - -static const struct clkops clkops_noncore_dpll_ops = { - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, -}; - -/* DPLL autoidle read/set code */ - - -/** - * omap3_dpll_autoidle_read - read a DPLL's autoidle bits - * @clk: struct clk * of the DPLL to read - * - * Return the DPLL's autoidle bits, shifted down to bit 0. Returns - * -EINVAL if passed a null pointer or if the struct clk does not - * appear to refer to a DPLL. - */ -static u32 omap3_dpll_autoidle_read(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return -EINVAL; - - dd = clk->dpll_data; - - v = __raw_readl(dd->autoidle_reg); - v &= dd->autoidle_mask; - v >>= __ffs(dd->autoidle_mask); - - return v; -} - -/** - * omap3_dpll_allow_idle - enable DPLL autoidle bits - * @clk: struct clk * of the DPLL to operate on - * - * Enable DPLL automatic idle control. This automatic idle mode - * switching takes effect only when the DPLL is locked, at least on - * OMAP3430. The DPLL will enter low-power stop when its downstream - * clocks are gated. No return value. - */ -static void omap3_dpll_allow_idle(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - /* - * REVISIT: CORE DPLL can optionally enter low-power bypass - * by writing 0x5 instead of 0x1. Add some mechanism to - * optionally enter this mode. - */ - v = __raw_readl(dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); - __raw_writel(v, dd->autoidle_reg); -} - -/** - * omap3_dpll_deny_idle - prevent DPLL from automatically idling - * @clk: struct clk * of the DPLL to operate on - * - * Disable DPLL automatic idle control. No return value. - */ -static void omap3_dpll_deny_idle(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - v = __raw_readl(dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); - __raw_writel(v, dd->autoidle_reg); -} - -/* Clock control for DPLL outputs */ - -/** - * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate - * @clk: DPLL output struct clk - * - * Using parent clock DPLL data, look up DPLL state. If locked, set our - * rate to the dpll_clk * 2; otherwise, just use dpll_clk. - */ -static unsigned long omap3_clkoutx2_recalc(struct clk *clk) -{ - const struct dpll_data *dd; - unsigned long rate; - u32 v; - struct clk *pclk; - - /* Walk up the parents of clk, looking for a DPLL */ - pclk = clk->parent; - while (pclk && !pclk->dpll_data) - pclk = pclk->parent; - - /* clk does not have a DPLL as a parent? */ - WARN_ON(!pclk); - - dd = pclk->dpll_data; - - WARN_ON(!dd->enable_mask); - - v = __raw_readl(dd->control_reg) & dd->enable_mask; - v >>= __ffs(dd->enable_mask); - if (v != OMAP3XXX_EN_DPLL_LOCKED) - rate = clk->parent->rate; - else - rate = clk->parent->rate * 2; - return rate; -} - /* Common clock code */ /* @@ -1037,7 +259,7 @@ static unsigned long omap3_clkoutx2_recalc(struct clk *clk) */ #if defined(CONFIG_ARCH_OMAP3) -static struct clk_functions omap2_clk_functions = { +struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable, .clk_disable = omap2_clk_disable, .clk_round_rate = omap2_clk_round_rate, @@ -1063,7 +285,7 @@ void omap2_clk_prepare_for_reboot(void) #endif } -static void omap3_clk_lock_dpll5(void) +void omap3_clk_lock_dpll5(void) { struct clk *dpll5_clk; struct clk *dpll5_m2_clk; @@ -1093,19 +315,32 @@ static void omap3_clk_lock_dpll5(void) */ static int __init omap2_clk_arch_init(void) { + struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck; + unsigned long osc_sys_rate; + if (!mpurate) return -EINVAL; + /* XXX test these for success */ + dpll1_ck = clk_get(NULL, "dpll1_ck"); + arm_fck = clk_get(NULL, "arm_fck"); + core_ck = clk_get(NULL, "core_ck"); + osc_sys_ck = clk_get(NULL, "osc_sys_ck"); + /* REVISIT: not yet ready for 343x */ - if (clk_set_rate(&dpll1_ck, mpurate)) + if (clk_set_rate(dpll1_ck, mpurate)) printk(KERN_ERR "*** Unable to set MPU rate\n"); recalculate_root_clocks(); - printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10), - (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ; + osc_sys_rate = clk_get_rate(osc_sys_ck); + + pr_info("Switched to new clocking rate (Crystal/Core/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (osc_sys_rate / 1000000), + ((osc_sys_rate / 100000) % 10), + (clk_get_rate(core_ck) / 1000000), + (clk_get_rate(arm_fck) / 1000000)); calibrate_delay(); @@ -1113,83 +348,7 @@ static int __init omap2_clk_arch_init(void) } arch_initcall(omap2_clk_arch_init); -int __init omap2_clk_init(void) -{ - /* struct prcm_config *prcm; */ - struct omap_clk *c; - /* u32 clkrate; */ - u32 cpu_clkflg; - - if (cpu_is_omap34xx()) { - cpu_mask = RATE_IN_343X; - cpu_clkflg = CK_343X; - - /* - * Update this if there are further clock changes between ES2 - * and production parts - */ - if (omap_rev() == OMAP3430_REV_ES1_0) { - /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ - cpu_clkflg |= CK_3430ES1; - } else { - cpu_mask |= RATE_IN_3430ES2; - cpu_clkflg |= CK_3430ES2; - } - } - - clk_init(&omap2_clk_functions); - - for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - clk_preinit(c->lk.clk); - for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - omap2_init_clk_clkdm(c->lk.clk); - } - - /* REVISIT: Not yet ready for OMAP3 */ -#if 0 - /* Check the MPU rate set by bootloader */ - clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; #endif - recalculate_root_clocks(); - - printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, - (core_ck.rate / 1000000), (arm_fck.rate / 1000000)); - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable_init_clocks(); - - /* - * Lock DPLL5 and put it in autoidle. - */ - if (omap_rev() >= OMAP3430_REV_ES2_0) - omap3_clk_lock_dpll5(); - /* Avoid sleeping during omap2_clk_prepare_for_reboot() */ - /* REVISIT: not yet ready for 343x */ -#if 0 - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); -#endif - return 0; -} - -#endif diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 8fe1bcb23dd9..9a2c07eac9ad 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1,2993 +1,24 @@ /* - * OMAP3 clock framework + * OMAP3 clock function prototypes and macros * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Written by Paul Walmsley - * With many device clock fixes by Kevin Hilman and Jouni Högander - * DPLL bypass clock support added by Roman Tereshonkov - * - */ - -/* - * Virtual clocks are introduced as convenient tools. - * They are sources for other clocks and not supposed - * to be requested from drivers directly. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H - -#include <plat/control.h> - -#include "clock.h" -#include "cm.h" -#include "cm-regbits-34xx.h" -#include "prm.h" -#include "prm-regbits-34xx.h" - -#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR - -static unsigned long omap3_dpll_recalc(struct clk *clk); -static unsigned long omap3_clkoutx2_recalc(struct clk *clk); -static void omap3_dpll_allow_idle(struct clk *clk); -static void omap3_dpll_deny_idle(struct clk *clk); -static u32 omap3_dpll_autoidle_read(struct clk *clk); -static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); -static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); -static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate); - -/* Maximum DPLL multiplier, divider values for OMAP3 */ -#define OMAP3_MAX_DPLL_MULT 2048 -#define OMAP3_MAX_DPLL_DIV 128 - -/* - * DPLL1 supplies clock to the MPU. - * DPLL2 supplies clock to the IVA2. - * DPLL3 supplies CORE domain clocks. - * DPLL4 supplies peripheral clocks. - * DPLL5 supplies other peripheral clocks (USBHOST, USIM). - */ - -/* Forward declarations for DPLL bypass clocks */ -static struct clk dpll1_fck; -static struct clk dpll2_fck; - -/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ -#define DPLL_LOW_POWER_STOP 0x1 -#define DPLL_LOW_POWER_BYPASS 0x5 -#define DPLL_LOCKED 0x7 - -/* PRM CLOCKS */ - -/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ -static struct clk omap_32k_fck = { - .name = "omap_32k_fck", - .ops = &clkops_null, - .rate = 32768, - .flags = RATE_FIXED, -}; - -static struct clk secure_32k_fck = { - .name = "secure_32k_fck", - .ops = &clkops_null, - .rate = 32768, - .flags = RATE_FIXED, -}; - -/* Virtual source clocks for osc_sys_ck */ -static struct clk virt_12m_ck = { - .name = "virt_12m_ck", - .ops = &clkops_null, - .rate = 12000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_13m_ck = { - .name = "virt_13m_ck", - .ops = &clkops_null, - .rate = 13000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_16_8m_ck = { - .name = "virt_16_8m_ck", - .ops = &clkops_null, - .rate = 16800000, - .flags = RATE_FIXED, -}; - -static struct clk virt_19_2m_ck = { - .name = "virt_19_2m_ck", - .ops = &clkops_null, - .rate = 19200000, - .flags = RATE_FIXED, -}; - -static struct clk virt_26m_ck = { - .name = "virt_26m_ck", - .ops = &clkops_null, - .rate = 26000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_38_4m_ck = { - .name = "virt_38_4m_ck", - .ops = &clkops_null, - .rate = 38400000, - .flags = RATE_FIXED, -}; - -static const struct clksel_rate osc_sys_12m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_13m_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_16_8m_rates[] = { - { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_19_2m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_26m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_38_4m_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel osc_sys_clksel[] = { - { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, - { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, - { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, - { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, - { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, - { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, - { .parent = NULL }, -}; - -/* Oscillator clock */ -/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ -static struct clk osc_sys_ck = { - .name = "osc_sys_ck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_PRM_CLKSEL, - .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, - .clksel = osc_sys_clksel, - /* REVISIT: deal with autoextclkmode? */ - .flags = RATE_FIXED, - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate div2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel sys_clksel[] = { - { .parent = &osc_sys_ck, .rates = div2_rates }, - { .parent = NULL } -}; - -/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */ -/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ -static struct clk sys_ck = { - .name = "sys_ck", - .ops = &clkops_null, - .parent = &osc_sys_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, - .clksel_mask = OMAP_SYSCLKDIV_MASK, - .clksel = sys_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk sys_altclk = { - .name = "sys_altclk", - .ops = &clkops_null, -}; - -/* Optional external clock input for some McBSPs */ -static struct clk mcbsp_clks = { - .name = "mcbsp_clks", - .ops = &clkops_null, -}; - -/* PRM EXTERNAL CLOCK OUTPUT */ - -static struct clk sys_clkout1 = { - .name = "sys_clkout1", - .ops = &clkops_omap2_dflt, - .parent = &osc_sys_ck, - .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, - .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DPLLS */ - -/* CM CLOCKS */ - -static const struct clksel_rate div16_dpll_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 5, .val = 5, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 7, .val = 7, .flags = RATE_IN_343X }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 9, .val = 9, .flags = RATE_IN_343X }, - { .div = 10, .val = 10, .flags = RATE_IN_343X }, - { .div = 11, .val = 11, .flags = RATE_IN_343X }, - { .div = 12, .val = 12, .flags = RATE_IN_343X }, - { .div = 13, .val = 13, .flags = RATE_IN_343X }, - { .div = 14, .val = 14, .flags = RATE_IN_343X }, - { .div = 15, .val = 15, .flags = RATE_IN_343X }, - { .div = 16, .val = 16, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -/* DPLL1 */ -/* MPU clock source */ -/* Type: DPLL */ -static struct dpll_data dpll1_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), - .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, - .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, - .clk_bypass = &dpll1_fck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), - .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), - .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll1_ck = { - .name = "dpll1_ck", - .ops = &clkops_null, - .parent = &sys_ck, - .dpll_data = &dpll1_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed. - */ -static struct clk dpll1_x2_ck = { - .name = "dpll1_x2_ck", - .ops = &clkops_null, - .parent = &dpll1_ck, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */ -static const struct clksel div16_dpll1_x2m2_clksel[] = { - { .parent = &dpll1_x2_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* - * Does not exist in the TRM - needed to separate the M2 divider from - * bypass selection in mpu_ck - */ -static struct clk dpll1_x2m2_ck = { - .name = "dpll1_x2m2_ck", - .ops = &clkops_null, - .parent = &dpll1_x2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), - .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, - .clksel = div16_dpll1_x2m2_clksel, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* DPLL2 */ -/* IVA2 clock source */ -/* Type: DPLL */ - -static struct dpll_data dpll2_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), - .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, - .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, - .clk_bypass = &dpll2_fck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), - .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | - (1 << DPLL_LOW_POWER_BYPASS), - .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), - .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll2_ck = { - .name = "dpll2_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll2_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll2_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -static const struct clksel div16_dpll2_m2x2_clksel[] = { - { .parent = &dpll2_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* - * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT - * or CLKOUTX2. CLKOUT seems most plausible. - */ -static struct clk dpll2_m2_ck = { - .name = "dpll2_m2_ck", - .ops = &clkops_null, - .parent = &dpll2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, - OMAP3430_CM_CLKSEL2_PLL), - .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, - .clksel = div16_dpll2_m2x2_clksel, - .clkdm_name = "dpll2_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* - * DPLL3 - * Source clock for all interfaces and for some device fclks - * REVISIT: Also supports fast relock bypass - not included below - */ -static struct dpll_data dpll3_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, - .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, - .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll3_ck = { - .name = "dpll3_ck", - .ops = &clkops_null, - .parent = &sys_ck, - .dpll_data = &dpll3_dd, - .round_rate = &omap2_dpll_round_rate, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed - */ -static struct clk dpll3_x2_ck = { - .name = "dpll3_x2_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel_rate div31_dpll3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 }, - { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 }, - { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 }, - { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 }, - { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 }, - { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 }, - { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 }, - { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 }, - { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 }, - { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 }, - { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 }, - { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 }, - { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 }, - { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 }, - { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 }, - { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 }, - { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 }, - { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 }, - { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 }, - { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 }, - { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 }, - { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 }, - { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 }, - { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 }, - { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 }, - { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 }, - { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 }, - { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 }, - { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 }, - { .div = 0 }, -}; - -static const struct clksel div31_dpll3m2_clksel[] = { - { .parent = &dpll3_ck, .rates = div31_dpll3_rates }, - { .parent = NULL } -}; - -/* DPLL3 output M2 - primary control point for CORE speed */ -static struct clk dpll3_m2_ck = { - .name = "dpll3_m2_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, - .clksel = div31_dpll3m2_clksel, - .clkdm_name = "dpll3_clkdm", - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap3_core_dpll_m2_set_rate, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk core_ck = { - .name = "core_ck", - .ops = &clkops_null, - .parent = &dpll3_m2_ck, - .recalc = &followparent_recalc, -}; - -static struct clk dpll3_m2x2_ck = { - .name = "dpll3_m2x2_ck", - .ops = &clkops_null, - .parent = &dpll3_m2_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static const struct clksel div16_dpll3_clksel[] = { - { .parent = &dpll3_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* This virtual clock is the source for dpll3_m3x2_ck */ -static struct clk dpll3_m3_ck = { - .name = "dpll3_m3_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL3_MASK, - .clksel = div16_dpll3_clksel, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll3_m3x2_ck = { - .name = "dpll3_m3x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll3_m3_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static struct clk emu_core_alwon_ck = { - .name = "emu_core_alwon_ck", - .ops = &clkops_null, - .parent = &dpll3_m3x2_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &followparent_recalc, -}; - -/* DPLL4 */ -/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ -/* Type: DPLL */ -static struct dpll_data dpll4_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), - .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, - .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll4_ck = { - .name = "dpll4_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll4_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_dpll4_set_rate, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed -- - * XXX does this serve any downstream clocks? - */ -static struct clk dpll4_x2_ck = { - .name = "dpll4_x2_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel div16_dpll4_clksel[] = { - { .parent = &dpll4_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* This virtual clock is the source for dpll4_m2x2_ck */ -static struct clk dpll4_m2_ck = { - .name = "dpll4_m2_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), - .clksel_mask = OMAP3430_DIV_96M_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m2x2_ck = { - .name = "dpll4_m2x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m2_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_96M_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* - * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as - * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: - * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and - * CM_96K_(F)CLK. - */ -static struct clk omap_96m_alwon_fck = { - .name = "omap_96m_alwon_fck", - .ops = &clkops_null, - .parent = &dpll4_m2x2_ck, - .recalc = &followparent_recalc, -}; - -static struct clk cm_96m_fck = { - .name = "cm_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_alwon_fck, - .recalc = &followparent_recalc, -}; - -static const struct clksel_rate omap_96m_dpll_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_96m_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_96m_fck_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, - { .parent = &sys_ck, .rates = omap_96m_sys_rates }, - { .parent = NULL } -}; - -static struct clk omap_96m_fck = { - .name = "omap_96m_fck", - .ops = &clkops_null, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_96M_MASK, - .clksel = omap_96m_fck_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* This virtual clock is the source for dpll4_m3x2_ck */ -static struct clk dpll4_m3_ck = { - .name = "dpll4_m3_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_TV_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m3x2_ck = { - .name = "dpll4_m3x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m3_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_TV_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel_rate omap_54m_d4m3x2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_54m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_54m_clksel[] = { - { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates }, - { .parent = &sys_altclk, .rates = omap_54m_alt_rates }, - { .parent = NULL } -}; - -static struct clk omap_54m_fck = { - .name = "omap_54m_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_54M_MASK, - .clksel = omap_54m_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate omap_48m_cm96m_rates[] = { - { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_48m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_48m_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, - { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, - { .parent = NULL } -}; - -static struct clk omap_48m_fck = { - .name = "omap_48m_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_48M_MASK, - .clksel = omap_48m_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk omap_12m_fck = { - .name = "omap_12m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .fixed_div = 4, - .recalc = &omap2_fixed_divisor_recalc, -}; - -/* This virstual clock is the source for dpll4_m4x2_ck */ -static struct clk dpll4_m4_ck = { - .name = "dpll4_m4_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, - .set_rate = &omap2_clksel_set_rate, - .round_rate = &omap2_clksel_round_rate, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m4x2_ck = { - .name = "dpll4_m4x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m4_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* This virtual clock is the source for dpll4_m5x2_ck */ -static struct clk dpll4_m5_ck = { - .name = "dpll4_m5_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m5x2_ck = { - .name = "dpll4_m5x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m5_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* This virtual clock is the source for dpll4_m6x2_ck */ -static struct clk dpll4_m6_ck = { - .name = "dpll4_m6_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL4_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m6x2_ck = { - .name = "dpll4_m6x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m6_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static struct clk emu_per_alwon_ck = { - .name = "emu_per_alwon_ck", - .ops = &clkops_null, - .parent = &dpll4_m6x2_ck, - .clkdm_name = "dpll4_clkdm", - .recalc = &followparent_recalc, -}; - -/* DPLL5 */ -/* Supplies 120MHz clock, USIM source clock */ -/* Type: DPLL */ -/* 3430ES2 only */ -static struct dpll_data dpll5_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), - .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, - .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), - .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), - .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll5_ck = { - .name = "dpll5_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll5_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll5_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -static const struct clksel div16_dpll5_clksel[] = { - { .parent = &dpll5_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -static struct clk dpll5_m2_ck = { - .name = "dpll5_m2_ck", - .ops = &clkops_null, - .parent = &dpll5_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), - .clksel_mask = OMAP3430ES2_DIV_120M_MASK, - .clksel = div16_dpll5_clksel, - .clkdm_name = "dpll5_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* CM EXTERNAL CLOCK OUTPUTS */ - -static const struct clksel_rate clkout2_src_core_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_96m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_54m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel clkout2_src_clksel[] = { - { .parent = &core_ck, .rates = clkout2_src_core_rates }, - { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, - { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, - { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, - { .parent = NULL } -}; - -static struct clk clkout2_src_ck = { - .name = "clkout2_src_ck", - .ops = &clkops_omap2_dflt, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP3430_CM_CLKOUT_CTRL, - .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, - .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, - .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, - .clksel = clkout2_src_clksel, - .clkdm_name = "core_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate sys_clkout2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 1, .flags = RATE_IN_343X }, - { .div = 4, .val = 2, .flags = RATE_IN_343X }, - { .div = 8, .val = 3, .flags = RATE_IN_343X }, - { .div = 16, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel sys_clkout2_clksel[] = { - { .parent = &clkout2_src_ck, .rates = sys_clkout2_rates }, - { .parent = NULL }, -}; - -static struct clk sys_clkout2 = { - .name = "sys_clkout2", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, - .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, - .clksel = sys_clkout2_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* CM OUTPUT CLOCKS */ - -static struct clk corex2_fck = { - .name = "corex2_fck", - .ops = &clkops_null, - .parent = &dpll3_m2x2_ck, - .recalc = &followparent_recalc, -}; - -/* DPLL power domain clock controls */ - -static const struct clksel_rate div4_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel div4_core_clksel[] = { - { .parent = &core_ck, .rates = div4_rates }, - { .parent = NULL } -}; - -/* - * REVISIT: Are these in DPLL power domain or CM power domain? docs - * may be inconsistent here? - */ -static struct clk dpll1_fck = { - .name = "dpll1_fck", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), - .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, - .clksel = div4_core_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mpu_ck = { - .name = "mpu_ck", - .ops = &clkops_null, - .parent = &dpll1_x2m2_ck, - .clkdm_name = "mpu_clkdm", - .recalc = &followparent_recalc, -}; - -/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ -static const struct clksel_rate arm_fck_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 1, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel arm_fck_clksel[] = { - { .parent = &mpu_ck, .rates = arm_fck_rates }, - { .parent = NULL } -}; - -static struct clk arm_fck = { - .name = "arm_fck", - .ops = &clkops_null, - .parent = &mpu_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, - .clksel = arm_fck_clksel, - .clkdm_name = "mpu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* XXX What about neon_clkdm ? */ - -/* - * REVISIT: This clock is never specifically defined in the 3430 TRM, - * although it is referenced - so this is a guess - */ -static struct clk emu_mpu_alwon_ck = { - .name = "emu_mpu_alwon_ck", - .ops = &clkops_null, - .parent = &mpu_ck, - .recalc = &followparent_recalc, -}; - -static struct clk dpll2_fck = { - .name = "dpll2_fck", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), - .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, - .clksel = div4_core_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk iva2_ck = { - .name = "iva2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll2_m2_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, - .clkdm_name = "iva2_clkdm", - .recalc = &followparent_recalc, -}; - -/* Common interface clocks */ - -static const struct clksel div2_core_clksel[] = { - { .parent = &core_ck, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk l3_ick = { - .name = "l3_ick", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_L3_MASK, - .clksel = div2_core_clksel, - .clkdm_name = "core_l3_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel div2_l3_clksel[] = { - { .parent = &l3_ick, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk l4_ick = { - .name = "l4_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_L4_MASK, - .clksel = div2_l3_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, - -}; - -static const struct clksel div2_l4_clksel[] = { - { .parent = &l4_ick, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk rm_ick = { - .name = "rm_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_RM_MASK, - .clksel = div2_l4_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* GFX power domain */ - -/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */ - -static const struct clksel gfx_l3_clksel[] = { - { .parent = &l3_ick, .rates = gfx_l3_rates }, - { .parent = NULL } -}; - -/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ -static struct clk gfx_l3_ck = { - .name = "gfx_l3_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), - .enable_bit = OMAP_EN_GFX_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk gfx_l3_fck = { - .name = "gfx_l3_fck", - .ops = &clkops_null, - .parent = &gfx_l3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), - .clksel_mask = OMAP_CLKSEL_GFX_MASK, - .clksel = gfx_l3_clksel, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gfx_l3_ick = { - .name = "gfx_l3_ick", - .ops = &clkops_null, - .parent = &gfx_l3_ck, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gfx_cg1_ck = { - .name = "gfx_cg1_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &gfx_l3_fck, /* REVISIT: correct? */ - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES1_EN_2D_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gfx_cg2_ck = { - .name = "gfx_cg2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &gfx_l3_fck, /* REVISIT: correct? */ - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES1_EN_3D_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -/* SGX power domain - 3430ES2 only */ - -static const struct clksel_rate sgx_core_rates[] = { - { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 4, .val = 1, .flags = RATE_IN_343X }, - { .div = 6, .val = 2, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel_rate sgx_96m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel sgx_clksel[] = { - { .parent = &core_ck, .rates = sgx_core_rates }, - { .parent = &cm_96m_fck, .rates = sgx_96m_rates }, - { .parent = NULL }, -}; - -static struct clk sgx_fck = { - .name = "sgx_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, - .clksel = sgx_clksel, - .clkdm_name = "sgx_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk sgx_ick = { - .name = "sgx_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, - .clkdm_name = "sgx_clkdm", - .recalc = &followparent_recalc, -}; - -/* CORE power domain */ - -static struct clk d2d_26m_fck = { - .name = "d2d_26m_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk modem_fck = { - .name = "modem_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MODEM_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sad2d_ick = { - .name = "sad2d_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SAD2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mad2d_ick = { - .name = "mad2d_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), - .enable_bit = OMAP3430_EN_MAD2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static const struct clksel omap343x_gpt_clksel[] = { - { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, - { .parent = &sys_ck, .rates = gpt_sys_rates }, - { .parent = NULL} -}; - -static struct clk gpt10_fck = { - .name = "gpt10_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt11_fck = { - .name = "gpt11_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk cpefuse_fck = { - .name = "cpefuse_fck", - .ops = &clkops_omap2_dflt, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk ts_fck = { - .name = "ts_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_32k_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_TS_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk usbtll_fck = { - .name = "usbtll_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll5_m2_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE 96M FCLK-derived clocks */ - -static struct clk core_96m_fck = { - .name = "core_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs3_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs2_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mspro_fck = { - .name = "mspro_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs1_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c3_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c2_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c1_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* - * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck; - * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck. - */ -static const struct clksel_rate common_mcbsp_96m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel mcbsp_15_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, - { .parent = NULL } -}; - -static struct clk mcbsp5_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 5, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, - .clksel = mcbsp_15_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp1_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), - .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, - .clksel = mcbsp_15_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* CORE_48M_FCK-derived clocks */ - -static struct clk core_48m_fck = { - .name = "core_48m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi4_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi3_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi2_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi1_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk uart2_fck = { - .name = "uart2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART2_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk uart1_fck = { - .name = "uart1_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk fshostusb_fck = { - .name = "fshostusb_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE_12M_FCK based clocks */ - -static struct clk core_12m_fck = { - .name = "core_12m_fck", - .ops = &clkops_null, - .parent = &omap_12m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hdq_fck = { - .name = "hdq_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_12m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DPLL3-derived clock */ - -static const struct clksel_rate ssi_ssr_corex2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel ssi_ssr_clksel[] = { - { .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates }, - { .parent = NULL } -}; - -static struct clk ssi_ssr_fck_3430es1 = { - .name = "ssi_ssr_fck", - .ops = &clkops_omap2_dflt, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, - .clksel = ssi_ssr_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk ssi_ssr_fck_3430es2 = { - .name = "ssi_ssr_fck", - .ops = &clkops_omap3430es2_ssi_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, - .clksel = ssi_ssr_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk ssi_sst_fck_3430es1 = { - .name = "ssi_sst_fck", - .ops = &clkops_null, - .parent = &ssi_ssr_fck_3430es1, - .fixed_div = 2, - .recalc = &omap2_fixed_divisor_recalc, -}; - -static struct clk ssi_sst_fck_3430es2 = { - .name = "ssi_sst_fck", - .ops = &clkops_null, - .parent = &ssi_ssr_fck_3430es2, - .fixed_div = 2, - .recalc = &omap2_fixed_divisor_recalc, -}; - - - -/* CORE_L3_ICK based clocks */ - -/* - * XXX must add clk_enable/clk_disable for these if standard code won't - * handle it - */ -static struct clk core_l3_ick = { - .name = "core_l3_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hsotgusb_ick_3430es1 = { - .name = "hsotgusb_ick", - .ops = &clkops_omap2_dflt, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hsotgusb_ick_3430es2 = { - .name = "hsotgusb_ick", - .ops = &clkops_omap3430es2_hsotgusb_wait, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sdrc_ick = { - .name = "sdrc_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SDRC_SHIFT, - .flags = ENABLE_ON_INIT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpmc_fck = { - .name = "gpmc_fck", - .ops = &clkops_null, - .parent = &core_l3_ick, - .flags = ENABLE_ON_INIT, /* huh? */ - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -/* SECURITY_L3_ICK based clocks */ - -static struct clk security_l3_ick = { - .name = "security_l3_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .recalc = &followparent_recalc, -}; - -static struct clk pka_ick = { - .name = "pka_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_PKA_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE_L4_ICK based clocks */ - -static struct clk core_l4_ick = { - .name = "core_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbtll_ick = { - .name = "usbtll_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), - .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs3_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* Intersystem Communication Registers - chassis mode only */ -static struct clk icr_ick = { - .name = "icr_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_ICR_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk aes2_ick = { - .name = "aes2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_AES2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sha12_ick = { - .name = "sha12_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SHA12_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk des2_ick = { - .name = "des2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_DES2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs2_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs1_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mspro_ick = { - .name = "mspro_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hdq_ick = { - .name = "hdq_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi4_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi3_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi2_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi1_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c3_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c2_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c1_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart2_ick = { - .name = "uart2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_UART2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart1_ick = { - .name = "uart1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_UART1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt11_ick = { - .name = "gpt11_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt10_ick = { - .name = "gpt10_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp5_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 5, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp1_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk fac_ick = { - .name = "fac_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mailboxes_ick = { - .name = "mailboxes_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk omapctrl_ick = { - .name = "omapctrl_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, - .flags = ENABLE_ON_INIT, - .recalc = &followparent_recalc, -}; - -/* SSI_L4_ICK based clocks */ - -static struct clk ssi_l4_ick = { - .name = "ssi_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk ssi_ick_3430es1 = { - .name = "ssi_ick", - .ops = &clkops_omap2_dflt, - .parent = &ssi_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk ssi_ick_3430es2 = { - .name = "ssi_ick", - .ops = &clkops_omap3430es2_ssi_wait, - .parent = &ssi_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* REVISIT: Technically the TRM claims that this is CORE_CLK based, - * but l4_ick makes more sense to me */ - -static const struct clksel usb_l4_clksel[] = { - { .parent = &l4_ick, .rates = div2_rates }, - { .parent = NULL }, -}; - -static struct clk usb_l4_ick = { - .name = "usb_l4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l4_ick, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, - .clksel = usb_l4_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* SECURITY_L4_ICK2 based clocks */ - -static struct clk security_l4_ick2 = { - .name = "security_l4_ick2", - .ops = &clkops_null, - .parent = &l4_ick, - .recalc = &followparent_recalc, -}; - -static struct clk aes1_ick = { - .name = "aes1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_AES1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk rng_ick = { - .name = "rng_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_RNG_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk sha11_ick = { - .name = "sha11_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_SHA11_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk des1_ick = { - .name = "des1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_DES1_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DSS */ -static struct clk dss1_alwon_fck_3430es1 = { - .name = "dss1_alwon_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll4_m4x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss1_alwon_fck_3430es2 = { - .name = "dss1_alwon_fck", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &dpll4_m4x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_tv_fck = { - .name = "dss_tv_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_54m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_TV_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_96m_fck = { - .name = "dss_96m_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_96m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_TV_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss2_alwon_fck = { - .name = "dss2_alwon_fck", - .ops = &clkops_omap2_dflt, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS2_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_ick_3430es1 = { - /* Handles both L3 and L4 clocks */ - .name = "dss_ick", - .ops = &clkops_omap2_dflt, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_ick_3430es2 = { - /* Handles both L3 and L4 clocks */ - .name = "dss_ick", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -/* CAM */ - -static struct clk cam_mclk = { - .name = "cam_mclk", - .ops = &clkops_omap2_dflt, - .parent = &dpll4_m5x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk cam_ick = { - /* Handles both L3 and L4 clocks */ - .name = "cam_ick", - .ops = &clkops_omap2_dflt, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk csi2_96m_fck = { - .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_CSI2_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -/* USBHOST - 3430ES2 only */ - -static struct clk usbhost_120m_fck = { - .name = "usbhost_120m_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll5_m2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_48m_fck = { - .name = "usbhost_48m_fck", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &omap_48m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_ick = { - /* Handles both L3 and L4 clocks */ - .name = "usbhost_ick", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -/* WKUP */ - -static const struct clksel_rate usim_96m_rates[] = { - { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 8, .val = 5, .flags = RATE_IN_343X }, - { .div = 10, .val = 6, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel_rate usim_120m_rates[] = { - { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 16, .val = 9, .flags = RATE_IN_343X }, - { .div = 20, .val = 10, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel usim_clksel[] = { - { .parent = &omap_96m_fck, .rates = usim_96m_rates }, - { .parent = &dpll5_m2_ck, .rates = usim_120m_rates }, - { .parent = &sys_ck, .rates = div2_rates }, - { .parent = NULL }, -}; - -/* 3430ES2 only */ -static struct clk usim_fck = { - .name = "usim_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, - .clksel = usim_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ -static struct clk gpt1_fck = { - .name = "gpt1_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "wkup_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk wkup_32k_fck = { - .name = "wkup_32k_fck", - .ops = &clkops_null, - .parent = &omap_32k_fck, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio1_dbck = { - .name = "gpio1_dbck", - .ops = &clkops_omap2_dflt, - .parent = &wkup_32k_fck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt2_fck = { - .name = "wdt2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_32k_fck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wkup_l4_ick = { - .name = "wkup_l4_ick", - .ops = &clkops_null, - .parent = &sys_ck, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -/* 3430ES2 only */ -/* Never specifically named in the TRM, so we have to infer a likely name */ -static struct clk usim_ick = { - .name = "usim_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt2_ick = { - .name = "wdt2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt1_ick = { - .name = "wdt1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio1_ick = { - .name = "gpio1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk omap_32ksync_ick = { - .name = "omap_32ksync_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -/* XXX This clock no longer exists in 3430 TRM rev F */ -static struct clk gpt12_ick = { - .name = "gpt12_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT12_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt1_ick = { - .name = "gpt1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - - - -/* PER clock domain */ - -static struct clk per_96m_fck = { - .name = "per_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_alwon_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk per_48m_fck = { - .name = "per_48m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart3_fck = { - .name = "uart3_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_48m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_UART3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt2_fck = { - .name = "gpt2_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt3_fck = { - .name = "gpt3_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt4_fck = { - .name = "gpt4_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt5_fck = { - .name = "gpt5_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt6_fck = { - .name = "gpt6_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt7_fck = { - .name = "gpt7_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt8_fck = { - .name = "gpt8_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt9_fck = { - .name = "gpt9_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk per_32k_alwon_fck = { - .name = "per_32k_alwon_fck", - .ops = &clkops_null, - .parent = &omap_32k_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio6_dbck = { - .name = "gpio6_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio5_dbck = { - .name = "gpio5_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio4_dbck = { - .name = "gpio4_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio3_dbck = { - .name = "gpio3_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio2_dbck = { - .name = "gpio2_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt3_fck = { - .name = "wdt3_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk per_l4_ick = { - .name = "per_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio6_ick = { - .name = "gpio6_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio5_ick = { - .name = "gpio5_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio4_ick = { - .name = "gpio4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio3_ick = { - .name = "gpio3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio2_ick = { - .name = "gpio2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt3_ick = { - .name = "wdt3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart3_ick = { - .name = "uart3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_UART3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt9_ick = { - .name = "gpt9_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt8_ick = { - .name = "gpt8_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt7_ick = { - .name = "gpt7_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt6_ick = { - .name = "gpt6_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt5_ick = { - .name = "gpt5_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt4_ick = { - .name = "gpt4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt3_ick = { - .name = "gpt3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt2_ick = { - .name = "gpt2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp2_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp3_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp4_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static const struct clksel mcbsp_234_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, - { .parent = NULL } -}; - -static struct clk mcbsp2_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), - .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp3_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp4_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* EMU clocks */ - -/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */ - -static const struct clksel_rate emu_src_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_per_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_mpu_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel emu_src_clksel[] = { - { .parent = &sys_ck, .rates = emu_src_sys_rates }, - { .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates }, - { .parent = &emu_per_alwon_ck, .rates = emu_src_per_rates }, - { .parent = &emu_mpu_alwon_ck, .rates = emu_src_mpu_rates }, - { .parent = NULL }, -}; - -/* - * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only - * to switch the source of some of the EMU clocks. - * XXX Are there CLKEN bits for these EMU clks? + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation */ -static struct clk emu_src_ck = { - .name = "emu_src_ck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_MUX_CTRL_MASK, - .clksel = emu_src_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate pclk_emu_rates[] = { - { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel pclk_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = pclk_emu_rates }, - { .parent = NULL }, -}; - -static struct clk pclk_fck = { - .name = "pclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, - .clksel = pclk_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate pclkx2_emu_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel pclkx2_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = pclkx2_emu_rates }, - { .parent = NULL }, -}; - -static struct clk pclkx2_fck = { - .name = "pclkx2_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, - .clksel = pclkx2_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel atclk_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = div2_rates }, - { .parent = NULL }, -}; - -static struct clk atclk_fck = { - .name = "atclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, - .clksel = atclk_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk traceclk_src_fck = { - .name = "traceclk_src_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, - .clksel = emu_src_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate traceclk_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel traceclk_clksel[] = { - { .parent = &traceclk_src_fck, .rates = traceclk_rates }, - { .parent = NULL }, -}; - -static struct clk traceclk_fck = { - .name = "traceclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, - .clksel = traceclk_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* SR clocks */ - -/* SmartReflex fclk (VDD1) */ -static struct clk sr1_fck = { - .name = "sr1_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_SR1_SHIFT, - .recalc = &followparent_recalc, -}; - -/* SmartReflex fclk (VDD2) */ -static struct clk sr2_fck = { - .name = "sr2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_SR2_SHIFT, - .recalc = &followparent_recalc, -}; -static struct clk sr_l4_ick = { - .name = "sr_l4_ick", - .ops = &clkops_null, /* RMK: missing? */ - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H -/* SECURE_32K_FCK clocks */ +int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); +int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate); +void omap3_clk_lock_dpll5(void); -static struct clk gpt12_fck = { - .name = "gpt12_fck", - .ops = &clkops_null, - .parent = &secure_32k_fck, - .recalc = &followparent_recalc, -}; +extern struct clk *sdrc_ick_p; +extern struct clk *arm_fck_p; -static struct clk wdt1_fck = { - .name = "wdt1_fck", - .ops = &clkops_null, - .parent = &secure_32k_fck, - .recalc = &followparent_recalc, -}; +/* OMAP34xx-specific clkops */ +extern const struct clkops clkops_omap3430es2_ssi_wait; +extern const struct clkops clkops_omap3430es2_hsotgusb_wait; +extern const struct clkops clkops_omap3430es2_dss_usbhost_wait; +extern const struct clkops clkops_noncore_dpll_ops; #endif diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c new file mode 100644 index 000000000000..8bdcc9cc7f9a --- /dev/null +++ b/arch/arm/mach-omap2/clock34xx_data.c @@ -0,0 +1,3289 @@ +/* + * OMAP3 clock data + * + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation + * + * Written by Paul Walmsley + * With many device clock fixes by Kevin Hilman and Jouni Högander + * DPLL bypass clock support added by Roman Tereshonkov + * + */ + +/* + * Virtual clocks are introduced as convenient tools. + * They are sources for other clocks and not supposed + * to be requested from drivers directly. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/clk.h> + +#include <plat/control.h> +#include <plat/clkdev_omap.h> + +#include "clock.h" +#include "clock34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm.h" +#include "prm-regbits-34xx.h" + +/* + * clocks + */ + +#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR + +/* Maximum DPLL multiplier, divider values for OMAP3 */ +#define OMAP3_MAX_DPLL_MULT 2048 +#define OMAP3_MAX_DPLL_DIV 128 + +/* + * DPLL1 supplies clock to the MPU. + * DPLL2 supplies clock to the IVA2. + * DPLL3 supplies CORE domain clocks. + * DPLL4 supplies peripheral clocks. + * DPLL5 supplies other peripheral clocks (USBHOST, USIM). + */ + +/* Forward declarations for DPLL bypass clocks */ +static struct clk dpll1_fck; +static struct clk dpll2_fck; + +/* PRM CLOCKS */ + +/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ +static struct clk omap_32k_fck = { + .name = "omap_32k_fck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, +}; + +static struct clk secure_32k_fck = { + .name = "secure_32k_fck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, +}; + +/* Virtual source clocks for osc_sys_ck */ +static struct clk virt_12m_ck = { + .name = "virt_12m_ck", + .ops = &clkops_null, + .rate = 12000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_13m_ck = { + .name = "virt_13m_ck", + .ops = &clkops_null, + .rate = 13000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_16_8m_ck = { + .name = "virt_16_8m_ck", + .ops = &clkops_null, + .rate = 16800000, + .flags = RATE_FIXED, +}; + +static struct clk virt_19_2m_ck = { + .name = "virt_19_2m_ck", + .ops = &clkops_null, + .rate = 19200000, + .flags = RATE_FIXED, +}; + +static struct clk virt_26m_ck = { + .name = "virt_26m_ck", + .ops = &clkops_null, + .rate = 26000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_38_4m_ck = { + .name = "virt_38_4m_ck", + .ops = &clkops_null, + .rate = 38400000, + .flags = RATE_FIXED, +}; + +static const struct clksel_rate osc_sys_12m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_13m_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_16_8m_rates[] = { + { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_19_2m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_26m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_38_4m_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel osc_sys_clksel[] = { + { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, + { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, + { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, + { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, + { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, + { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, + { .parent = NULL }, +}; + +/* Oscillator clock */ +/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ +static struct clk osc_sys_ck = { + .name = "osc_sys_ck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_PRM_CLKSEL, + .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, + .clksel = osc_sys_clksel, + /* REVISIT: deal with autoextclkmode? */ + .flags = RATE_FIXED, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate div2_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel sys_clksel[] = { + { .parent = &osc_sys_ck, .rates = div2_rates }, + { .parent = NULL } +}; + +/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */ +/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ +static struct clk sys_ck = { + .name = "sys_ck", + .ops = &clkops_null, + .parent = &osc_sys_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, + .clksel_mask = OMAP_SYSCLKDIV_MASK, + .clksel = sys_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk sys_altclk = { + .name = "sys_altclk", + .ops = &clkops_null, +}; + +/* Optional external clock input for some McBSPs */ +static struct clk mcbsp_clks = { + .name = "mcbsp_clks", + .ops = &clkops_null, +}; + +/* PRM EXTERNAL CLOCK OUTPUT */ + +static struct clk sys_clkout1 = { + .name = "sys_clkout1", + .ops = &clkops_omap2_dflt, + .parent = &osc_sys_ck, + .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, + .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DPLLS */ + +/* CM CLOCKS */ + +static const struct clksel_rate div16_dpll_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 5, .val = 5, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 7, .val = 7, .flags = RATE_IN_343X }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 9, .val = 9, .flags = RATE_IN_343X }, + { .div = 10, .val = 10, .flags = RATE_IN_343X }, + { .div = 11, .val = 11, .flags = RATE_IN_343X }, + { .div = 12, .val = 12, .flags = RATE_IN_343X }, + { .div = 13, .val = 13, .flags = RATE_IN_343X }, + { .div = 14, .val = 14, .flags = RATE_IN_343X }, + { .div = 15, .val = 15, .flags = RATE_IN_343X }, + { .div = 16, .val = 16, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +/* DPLL1 */ +/* MPU clock source */ +/* Type: DPLL */ +static struct dpll_data dpll1_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), + .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, + .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, + .clk_bypass = &dpll1_fck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), + .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), + .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), + .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll1_ck = { + .name = "dpll1_ck", + .ops = &clkops_null, + .parent = &sys_ck, + .dpll_data = &dpll1_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed. + */ +static struct clk dpll1_x2_ck = { + .name = "dpll1_x2_ck", + .ops = &clkops_null, + .parent = &dpll1_ck, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */ +static const struct clksel div16_dpll1_x2m2_clksel[] = { + { .parent = &dpll1_x2_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* + * Does not exist in the TRM - needed to separate the M2 divider from + * bypass selection in mpu_ck + */ +static struct clk dpll1_x2m2_ck = { + .name = "dpll1_x2m2_ck", + .ops = &clkops_null, + .parent = &dpll1_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), + .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, + .clksel = div16_dpll1_x2m2_clksel, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* DPLL2 */ +/* IVA2 clock source */ +/* Type: DPLL */ + +static struct dpll_data dpll2_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), + .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, + .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, + .clk_bypass = &dpll2_fck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), + .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | + (1 << DPLL_LOW_POWER_BYPASS), + .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), + .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), + .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll2_ck = { + .name = "dpll2_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll2_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll2_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +static const struct clksel div16_dpll2_m2x2_clksel[] = { + { .parent = &dpll2_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* + * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT + * or CLKOUTX2. CLKOUT seems most plausible. + */ +static struct clk dpll2_m2_ck = { + .name = "dpll2_m2_ck", + .ops = &clkops_null, + .parent = &dpll2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, + OMAP3430_CM_CLKSEL2_PLL), + .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, + .clksel = div16_dpll2_m2x2_clksel, + .clkdm_name = "dpll2_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* + * DPLL3 + * Source clock for all interfaces and for some device fclks + * REVISIT: Also supports fast relock bypass - not included below + */ +static struct dpll_data dpll3_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, + .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, + .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), + .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll3_ck = { + .name = "dpll3_ck", + .ops = &clkops_null, + .parent = &sys_ck, + .dpll_data = &dpll3_dd, + .round_rate = &omap2_dpll_round_rate, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed + */ +static struct clk dpll3_x2_ck = { + .name = "dpll3_x2_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel_rate div31_dpll3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 }, + { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 }, + { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 }, + { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 }, + { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 }, + { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 }, + { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 }, + { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 }, + { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 }, + { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 }, + { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 }, + { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 }, + { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 }, + { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 }, + { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 }, + { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 }, + { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 }, + { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 }, + { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 }, + { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 }, + { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 }, + { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 }, + { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 }, + { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 }, + { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 }, + { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 }, + { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 }, + { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 }, + { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 }, + { .div = 0 }, +}; + +static const struct clksel div31_dpll3m2_clksel[] = { + { .parent = &dpll3_ck, .rates = div31_dpll3_rates }, + { .parent = NULL } +}; + +/* DPLL3 output M2 - primary control point for CORE speed */ +static struct clk dpll3_m2_ck = { + .name = "dpll3_m2_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, + .clksel = div31_dpll3m2_clksel, + .clkdm_name = "dpll3_clkdm", + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap3_core_dpll_m2_set_rate, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk core_ck = { + .name = "core_ck", + .ops = &clkops_null, + .parent = &dpll3_m2_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dpll3_m2x2_ck = { + .name = "dpll3_m2x2_ck", + .ops = &clkops_null, + .parent = &dpll3_m2_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static const struct clksel div16_dpll3_clksel[] = { + { .parent = &dpll3_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* This virtual clock is the source for dpll3_m3x2_ck */ +static struct clk dpll3_m3_ck = { + .name = "dpll3_m3_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_DIV_DPLL3_MASK, + .clksel = div16_dpll3_clksel, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll3_m3x2_ck = { + .name = "dpll3_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll3_m3_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static struct clk emu_core_alwon_ck = { + .name = "emu_core_alwon_ck", + .ops = &clkops_null, + .parent = &dpll3_m3x2_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &followparent_recalc, +}; + +/* DPLL4 */ +/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ +/* Type: DPLL */ +static struct dpll_data dpll4_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), + .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, + .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), + .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll4_ck = { + .name = "dpll4_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll4_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_dpll4_set_rate, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed -- + * XXX does this serve any downstream clocks? + */ +static struct clk dpll4_x2_ck = { + .name = "dpll4_x2_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel div16_dpll4_clksel[] = { + { .parent = &dpll4_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* This virtual clock is the source for dpll4_m2x2_ck */ +static struct clk dpll4_m2_ck = { + .name = "dpll4_m2_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), + .clksel_mask = OMAP3430_DIV_96M_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m2x2_ck = { + .name = "dpll4_m2x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m2_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_96M_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* + * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as + * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: + * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and + * CM_96K_(F)CLK. + */ +static struct clk omap_96m_alwon_fck = { + .name = "omap_96m_alwon_fck", + .ops = &clkops_null, + .parent = &dpll4_m2x2_ck, + .recalc = &followparent_recalc, +}; + +static struct clk cm_96m_fck = { + .name = "cm_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_alwon_fck, + .recalc = &followparent_recalc, +}; + +static const struct clksel_rate omap_96m_dpll_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_96m_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_96m_fck_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, + { .parent = &sys_ck, .rates = omap_96m_sys_rates }, + { .parent = NULL } +}; + +static struct clk omap_96m_fck = { + .name = "omap_96m_fck", + .ops = &clkops_null, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_96M_MASK, + .clksel = omap_96m_fck_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* This virtual clock is the source for dpll4_m3x2_ck */ +static struct clk dpll4_m3_ck = { + .name = "dpll4_m3_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_TV_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m3x2_ck = { + .name = "dpll4_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m3_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_TV_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel_rate omap_54m_d4m3x2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_54m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_54m_clksel[] = { + { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates }, + { .parent = &sys_altclk, .rates = omap_54m_alt_rates }, + { .parent = NULL } +}; + +static struct clk omap_54m_fck = { + .name = "omap_54m_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_54M_MASK, + .clksel = omap_54m_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate omap_48m_cm96m_rates[] = { + { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_48m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_48m_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, + { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, + { .parent = NULL } +}; + +static struct clk omap_48m_fck = { + .name = "omap_48m_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_48M_MASK, + .clksel = omap_48m_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk omap_12m_fck = { + .name = "omap_12m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .fixed_div = 4, + .recalc = &omap2_fixed_divisor_recalc, +}; + +/* This virstual clock is the source for dpll4_m4x2_ck */ +static struct clk dpll4_m4_ck = { + .name = "dpll4_m4_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, + .set_rate = &omap2_clksel_set_rate, + .round_rate = &omap2_clksel_round_rate, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m4x2_ck = { + .name = "dpll4_m4x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m4_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* This virtual clock is the source for dpll4_m5x2_ck */ +static struct clk dpll4_m5_ck = { + .name = "dpll4_m5_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m5x2_ck = { + .name = "dpll4_m5x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m5_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* This virtual clock is the source for dpll4_m6x2_ck */ +static struct clk dpll4_m6_ck = { + .name = "dpll4_m6_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_DIV_DPLL4_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m6x2_ck = { + .name = "dpll4_m6x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m6_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static struct clk emu_per_alwon_ck = { + .name = "emu_per_alwon_ck", + .ops = &clkops_null, + .parent = &dpll4_m6x2_ck, + .clkdm_name = "dpll4_clkdm", + .recalc = &followparent_recalc, +}; + +/* DPLL5 */ +/* Supplies 120MHz clock, USIM source clock */ +/* Type: DPLL */ +/* 3430ES2 only */ +static struct dpll_data dpll5_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), + .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, + .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), + .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), + .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), + .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll5_ck = { + .name = "dpll5_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll5_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll5_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +static const struct clksel div16_dpll5_clksel[] = { + { .parent = &dpll5_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +static struct clk dpll5_m2_ck = { + .name = "dpll5_m2_ck", + .ops = &clkops_null, + .parent = &dpll5_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), + .clksel_mask = OMAP3430ES2_DIV_120M_MASK, + .clksel = div16_dpll5_clksel, + .clkdm_name = "dpll5_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* CM EXTERNAL CLOCK OUTPUTS */ + +static const struct clksel_rate clkout2_src_core_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_96m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_54m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel clkout2_src_clksel[] = { + { .parent = &core_ck, .rates = clkout2_src_core_rates }, + { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, + { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, + { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, + { .parent = NULL } +}; + +static struct clk clkout2_src_ck = { + .name = "clkout2_src_ck", + .ops = &clkops_omap2_dflt, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP3430_CM_CLKOUT_CTRL, + .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, + .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, + .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, + .clksel = clkout2_src_clksel, + .clkdm_name = "core_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate sys_clkout2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 4, .val = 2, .flags = RATE_IN_343X }, + { .div = 8, .val = 3, .flags = RATE_IN_343X }, + { .div = 16, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel sys_clkout2_clksel[] = { + { .parent = &clkout2_src_ck, .rates = sys_clkout2_rates }, + { .parent = NULL }, +}; + +static struct clk sys_clkout2 = { + .name = "sys_clkout2", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, + .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, + .clksel = sys_clkout2_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* CM OUTPUT CLOCKS */ + +static struct clk corex2_fck = { + .name = "corex2_fck", + .ops = &clkops_null, + .parent = &dpll3_m2x2_ck, + .recalc = &followparent_recalc, +}; + +/* DPLL power domain clock controls */ + +static const struct clksel_rate div4_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel div4_core_clksel[] = { + { .parent = &core_ck, .rates = div4_rates }, + { .parent = NULL } +}; + +/* + * REVISIT: Are these in DPLL power domain or CM power domain? docs + * may be inconsistent here? + */ +static struct clk dpll1_fck = { + .name = "dpll1_fck", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), + .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, + .clksel = div4_core_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mpu_ck = { + .name = "mpu_ck", + .ops = &clkops_null, + .parent = &dpll1_x2m2_ck, + .clkdm_name = "mpu_clkdm", + .recalc = &followparent_recalc, +}; + +/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ +static const struct clksel_rate arm_fck_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel arm_fck_clksel[] = { + { .parent = &mpu_ck, .rates = arm_fck_rates }, + { .parent = NULL } +}; + +static struct clk arm_fck = { + .name = "arm_fck", + .ops = &clkops_null, + .parent = &mpu_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), + .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, + .clksel = arm_fck_clksel, + .clkdm_name = "mpu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* XXX What about neon_clkdm ? */ + +/* + * REVISIT: This clock is never specifically defined in the 3430 TRM, + * although it is referenced - so this is a guess + */ +static struct clk emu_mpu_alwon_ck = { + .name = "emu_mpu_alwon_ck", + .ops = &clkops_null, + .parent = &mpu_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dpll2_fck = { + .name = "dpll2_fck", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), + .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, + .clksel = div4_core_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva2_ck = { + .name = "iva2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll2_m2_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .clkdm_name = "iva2_clkdm", + .recalc = &followparent_recalc, +}; + +/* Common interface clocks */ + +static const struct clksel div2_core_clksel[] = { + { .parent = &core_ck, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk l3_ick = { + .name = "l3_ick", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_L3_MASK, + .clksel = div2_core_clksel, + .clkdm_name = "core_l3_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel div2_l3_clksel[] = { + { .parent = &l3_ick, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk l4_ick = { + .name = "l4_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_L4_MASK, + .clksel = div2_l3_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, + +}; + +static const struct clksel div2_l4_clksel[] = { + { .parent = &l4_ick, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk rm_ick = { + .name = "rm_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_RM_MASK, + .clksel = div2_l4_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* GFX power domain */ + +/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */ + +static const struct clksel gfx_l3_clksel[] = { + { .parent = &l3_ick, .rates = gfx_l3_rates }, + { .parent = NULL } +}; + +/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ +static struct clk gfx_l3_ck = { + .name = "gfx_l3_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), + .enable_bit = OMAP_EN_GFX_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gfx_l3_fck = { + .name = "gfx_l3_fck", + .ops = &clkops_null, + .parent = &gfx_l3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), + .clksel_mask = OMAP_CLKSEL_GFX_MASK, + .clksel = gfx_l3_clksel, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_l3_ick = { + .name = "gfx_l3_ick", + .ops = &clkops_null, + .parent = &gfx_l3_ck, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gfx_cg1_ck = { + .name = "gfx_cg1_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES1_EN_2D_SHIFT, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gfx_cg2_ck = { + .name = "gfx_cg2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES1_EN_3D_SHIFT, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +/* SGX power domain - 3430ES2 only */ + +static const struct clksel_rate sgx_core_rates[] = { + { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 4, .val = 1, .flags = RATE_IN_343X }, + { .div = 6, .val = 2, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel_rate sgx_96m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel sgx_clksel[] = { + { .parent = &core_ck, .rates = sgx_core_rates }, + { .parent = &cm_96m_fck, .rates = sgx_96m_rates }, + { .parent = NULL }, +}; + +static struct clk sgx_fck = { + .name = "sgx_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, + .clksel = sgx_clksel, + .clkdm_name = "sgx_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk sgx_ick = { + .name = "sgx_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, + .clkdm_name = "sgx_clkdm", + .recalc = &followparent_recalc, +}; + +/* CORE power domain */ + +static struct clk d2d_26m_fck = { + .name = "d2d_26m_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk modem_fck = { + .name = "modem_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MODEM_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sad2d_ick = { + .name = "sad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mad2d_ick = { + .name = "mad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430_EN_MAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static const struct clksel omap343x_gpt_clksel[] = { + { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, + { .parent = &sys_ck, .rates = gpt_sys_rates }, + { .parent = NULL} +}; + +static struct clk gpt10_fck = { + .name = "gpt10_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_GPT10_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt11_fck = { + .name = "gpt11_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_GPT11_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk cpefuse_fck = { + .name = "cpefuse_fck", + .ops = &clkops_omap2_dflt, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk ts_fck = { + .name = "ts_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_32k_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_TS_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk usbtll_fck = { + .name = "usbtll_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll5_m2_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE 96M FCLK-derived clocks */ + +static struct clk core_96m_fck = { + .name = "core_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs3_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MMC2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mspro_fck = { + .name = "mspro_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MSPRO_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MMC1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* + * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck; + * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck. + */ +static const struct clksel_rate common_mcbsp_96m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel mcbsp_15_clksel[] = { + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + +static struct clk mcbsp5_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 5, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, + .clksel = mcbsp_15_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp1_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, + .clksel = mcbsp_15_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* CORE_48M_FCK-derived clocks */ + +static struct clk core_48m_fck = { + .name = "core_48m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_fck = { + .name = "uart2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_fck = { + .name = "uart1_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk fshostusb_fck = { + .name = "fshostusb_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE_12M_FCK based clocks */ + +static struct clk core_12m_fck = { + .name = "core_12m_fck", + .ops = &clkops_null, + .parent = &omap_12m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hdq_fck = { + .name = "hdq_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_12m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_HDQ_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DPLL3-derived clock */ + +static const struct clksel_rate ssi_ssr_corex2_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel ssi_ssr_clksel[] = { + { .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates }, + { .parent = NULL } +}; + +static struct clk ssi_ssr_fck_3430es1 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap2_dflt, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_ssr_fck_3430es2 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap3430es2_ssi_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck_3430es1 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es1, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +static struct clk ssi_sst_fck_3430es2 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es2, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + + + +/* CORE_L3_ICK based clocks */ + +/* + * XXX must add clk_enable/clk_disable for these if standard code won't + * handle it + */ +static struct clk core_l3_ick = { + .name = "core_l3_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es1 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap2_dflt, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es2 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap3430es2_hsotgusb_wait, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sdrc_ick = { + .name = "sdrc_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SDRC_SHIFT, + .flags = ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpmc_fck = { + .name = "gpmc_fck", + .ops = &clkops_null, + .parent = &core_l3_ick, + .flags = ENABLE_ON_INIT, /* huh? */ + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +/* SECURITY_L3_ICK based clocks */ + +static struct clk security_l3_ick = { + .name = "security_l3_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .recalc = &followparent_recalc, +}; + +static struct clk pka_ick = { + .name = "pka_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_PKA_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE_L4_ICK based clocks */ + +static struct clk core_l4_ick = { + .name = "core_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbtll_ick = { + .name = "usbtll_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs3_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* Intersystem Communication Registers - chassis mode only */ +static struct clk icr_ick = { + .name = "icr_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_ICR_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk aes2_ick = { + .name = "aes2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_AES2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sha12_ick = { + .name = "sha12_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SHA12_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk des2_ick = { + .name = "des2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_DES2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MMC2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MMC1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mspro_ick = { + .name = "mspro_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MSPRO_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hdq_ick = { + .name = "hdq_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HDQ_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart2_ick = { + .name = "uart2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_UART2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart1_ick = { + .name = "uart1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_UART1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt11_ick = { + .name = "gpt11_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_GPT11_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt10_ick = { + .name = "gpt10_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_GPT10_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp5_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 5, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp1_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk fac_ick = { + .name = "fac_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mailboxes_ick = { + .name = "mailboxes_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk omapctrl_ick = { + .name = "omapctrl_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, + .flags = ENABLE_ON_INIT, + .recalc = &followparent_recalc, +}; + +/* SSI_L4_ICK based clocks */ + +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk ssi_ick_3430es1 = { + .name = "ssi_ick", + .ops = &clkops_omap2_dflt, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk ssi_ick_3430es2 = { + .name = "ssi_ick", + .ops = &clkops_omap3430es2_ssi_wait, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* REVISIT: Technically the TRM claims that this is CORE_CLK based, + * but l4_ick makes more sense to me */ + +static const struct clksel usb_l4_clksel[] = { + { .parent = &l4_ick, .rates = div2_rates }, + { .parent = NULL }, +}; + +static struct clk usb_l4_ick = { + .name = "usb_l4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l4_ick, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, + .clksel = usb_l4_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* SECURITY_L4_ICK2 based clocks */ + +static struct clk security_l4_ick2 = { + .name = "security_l4_ick2", + .ops = &clkops_null, + .parent = &l4_ick, + .recalc = &followparent_recalc, +}; + +static struct clk aes1_ick = { + .name = "aes1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_AES1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk rng_ick = { + .name = "rng_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_RNG_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk sha11_ick = { + .name = "sha11_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_SHA11_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk des1_ick = { + .name = "des1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_DES1_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DSS */ +static struct clk dss1_alwon_fck_3430es1 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss1_alwon_fck_3430es2 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_tv_fck = { + .name = "dss_tv_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_54m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_TV_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_96m_fck = { + .name = "dss_96m_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_96m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_TV_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss2_alwon_fck = { + .name = "dss2_alwon_fck", + .ops = &clkops_omap2_dflt, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS2_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_ick_3430es1 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap2_dflt, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_ick_3430es2 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +/* CAM */ + +static struct clk cam_mclk = { + .name = "cam_mclk", + .ops = &clkops_omap2_dflt, + .parent = &dpll4_m5x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk cam_ick = { + /* Handles both L3 and L4 clocks */ + .name = "cam_ick", + .ops = &clkops_omap2_dflt, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk csi2_96m_fck = { + .name = "csi2_96m_fck", + .ops = &clkops_omap2_dflt, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CSI2_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +/* USBHOST - 3430ES2 only */ + +static struct clk usbhost_120m_fck = { + .name = "usbhost_120m_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll5_m2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_48m_fck = { + .name = "usbhost_48m_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &omap_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_ick = { + /* Handles both L3 and L4 clocks */ + .name = "usbhost_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +/* WKUP */ + +static const struct clksel_rate usim_96m_rates[] = { + { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 8, .val = 5, .flags = RATE_IN_343X }, + { .div = 10, .val = 6, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel_rate usim_120m_rates[] = { + { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 16, .val = 9, .flags = RATE_IN_343X }, + { .div = 20, .val = 10, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel usim_clksel[] = { + { .parent = &omap_96m_fck, .rates = usim_96m_rates }, + { .parent = &dpll5_m2_ck, .rates = usim_120m_rates }, + { .parent = &sys_ck, .rates = div2_rates }, + { .parent = NULL }, +}; + +/* 3430ES2 only */ +static struct clk usim_fck = { + .name = "usim_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, + .clksel = usim_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ +static struct clk gpt1_fck = { + .name = "gpt1_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT1_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "wkup_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk wkup_32k_fck = { + .name = "wkup_32k_fck", + .ops = &clkops_null, + .parent = &omap_32k_fck, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_dbck = { + .name = "gpio1_dbck", + .ops = &clkops_omap2_dflt, + .parent = &wkup_32k_fck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_fck = { + .name = "wdt2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_32k_fck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_WDT2_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wkup_l4_ick = { + .name = "wkup_l4_ick", + .ops = &clkops_null, + .parent = &sys_ck, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +/* 3430ES2 only */ +/* Never specifically named in the TRM, so we have to infer a likely name */ +static struct clk usim_ick = { + .name = "usim_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_ick = { + .name = "wdt2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT2_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt1_ick = { + .name = "wdt1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_ick = { + .name = "gpio1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk omap_32ksync_ick = { + .name = "omap_32ksync_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +/* XXX This clock no longer exists in 3430 TRM rev F */ +static struct clk gpt12_ick = { + .name = "gpt12_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT12_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt1_ick = { + .name = "gpt1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + + + +/* PER clock domain */ + +static struct clk per_96m_fck = { + .name = "per_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_alwon_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk per_48m_fck = { + .name = "per_48m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart3_fck = { + .name = "uart3_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_UART3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_fck = { + .name = "gpt2_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT2_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt3_fck = { + .name = "gpt3_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT3_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt4_fck = { + .name = "gpt4_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT4_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt5_fck = { + .name = "gpt5_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT5_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt6_fck = { + .name = "gpt6_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT6_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt7_fck = { + .name = "gpt7_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT7_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt8_fck = { + .name = "gpt8_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT8_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt9_fck = { + .name = "gpt9_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT9_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk per_32k_alwon_fck = { + .name = "per_32k_alwon_fck", + .ops = &clkops_null, + .parent = &omap_32k_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_dbck = { + .name = "gpio6_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_dbck = { + .name = "gpio5_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_dbck = { + .name = "gpio4_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_dbck = { + .name = "gpio3_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_dbck = { + .name = "gpio2_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_fck = { + .name = "wdt3_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_WDT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk per_l4_ick = { + .name = "per_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_ick = { + .name = "gpio6_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_ick = { + .name = "gpio5_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_ick = { + .name = "gpio4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_ick = { + .name = "gpio3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_ick = { + .name = "gpio2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_ick = { + .name = "wdt3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart3_ick = { + .name = "uart3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_UART3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt9_ick = { + .name = "gpt9_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT9_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt8_ick = { + .name = "gpt8_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT8_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt7_ick = { + .name = "gpt7_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT7_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt6_ick = { + .name = "gpt6_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt5_ick = { + .name = "gpt5_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt4_ick = { + .name = "gpt4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt3_ick = { + .name = "gpt3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_ick = { + .name = "gpt2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp2_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp3_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp4_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static const struct clksel mcbsp_234_clksel[] = { + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + +static struct clk mcbsp2_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp3_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp4_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* EMU clocks */ + +/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */ + +static const struct clksel_rate emu_src_sys_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_per_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_mpu_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel emu_src_clksel[] = { + { .parent = &sys_ck, .rates = emu_src_sys_rates }, + { .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates }, + { .parent = &emu_per_alwon_ck, .rates = emu_src_per_rates }, + { .parent = &emu_mpu_alwon_ck, .rates = emu_src_mpu_rates }, + { .parent = NULL }, +}; + +/* + * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only + * to switch the source of some of the EMU clocks. + * XXX Are there CLKEN bits for these EMU clks? + */ +static struct clk emu_src_ck = { + .name = "emu_src_ck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_MUX_CTRL_MASK, + .clksel = emu_src_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate pclk_emu_rates[] = { + { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel pclk_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = pclk_emu_rates }, + { .parent = NULL }, +}; + +static struct clk pclk_fck = { + .name = "pclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, + .clksel = pclk_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate pclkx2_emu_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel pclkx2_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = pclkx2_emu_rates }, + { .parent = NULL }, +}; + +static struct clk pclkx2_fck = { + .name = "pclkx2_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, + .clksel = pclkx2_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel atclk_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = div2_rates }, + { .parent = NULL }, +}; + +static struct clk atclk_fck = { + .name = "atclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, + .clksel = atclk_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk traceclk_src_fck = { + .name = "traceclk_src_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, + .clksel = emu_src_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate traceclk_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel traceclk_clksel[] = { + { .parent = &traceclk_src_fck, .rates = traceclk_rates }, + { .parent = NULL }, +}; + +static struct clk traceclk_fck = { + .name = "traceclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, + .clksel = traceclk_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* SR clocks */ + +/* SmartReflex fclk (VDD1) */ +static struct clk sr1_fck = { + .name = "sr1_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_SR1_SHIFT, + .recalc = &followparent_recalc, +}; + +/* SmartReflex fclk (VDD2) */ +static struct clk sr2_fck = { + .name = "sr2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_SR2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk sr_l4_ick = { + .name = "sr_l4_ick", + .ops = &clkops_null, /* RMK: missing? */ + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* SECURE_32K_FCK clocks */ + +static struct clk gpt12_fck = { + .name = "gpt12_fck", + .ops = &clkops_null, + .parent = &secure_32k_fck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt1_fck = { + .name = "wdt1_fck", + .ops = &clkops_null, + .parent = &secure_32k_fck, + .recalc = &followparent_recalc, +}; + + +/* + * clkdev + */ + +static struct omap_clk omap34xx_clks[] = { + CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X), + CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X), + CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X), + CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2), + CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X), + CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X), + CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X), + CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X), + CLK(NULL, "sys_ck", &sys_ck, CK_343X), + CLK(NULL, "sys_altclk", &sys_altclk, CK_343X), + CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X), + CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X), + CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X), + CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X), + CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X), + CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X), + CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X), + CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X), + CLK(NULL, "core_ck", &core_ck, CK_343X), + CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X), + CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X), + CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), + CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), + CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), + CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), + CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), + CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), + CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), + CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X), + CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X), + CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X), + CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X), + CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X), + CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X), + CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X), + CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X), + CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X), + CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X), + CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X), + CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X), + CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), + CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), + CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), + CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), + CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), + CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), + CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X), + CLK(NULL, "corex2_fck", &corex2_fck, CK_343X), + CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), + CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), + CLK(NULL, "arm_fck", &arm_fck, CK_343X), + CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), + CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), + CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), + CLK(NULL, "l3_ick", &l3_ick, CK_343X), + CLK(NULL, "l4_ick", &l4_ick, CK_343X), + CLK(NULL, "rm_ick", &rm_ick, CK_343X), + CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), + CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), + CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), + CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), + CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), + CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), + CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), + CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "modem_fck", &modem_fck, CK_343X), + CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), + CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), + CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), + CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), + CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), + CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), + CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X), + CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), + CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), + CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), + CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), + CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), + CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), + CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), + CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), + CLK(NULL, "pka_ick", &pka_ick, CK_343X), + CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), + CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), + CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2), + CLK(NULL, "icr_ick", &icr_ick, CK_343X), + CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), + CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), + CLK(NULL, "des2_ick", &des2_ick, CK_343X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), + CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), + CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X), + CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), + CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), + CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), + CLK("omap_rng", "ick", &rng_ick, CK_343X), + CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), + CLK(NULL, "des1_ick", &des1_ick, CK_343X), + CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), + CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2), + CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), + CLK(NULL, "cam_ick", &cam_ick, CK_343X), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), + CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), + CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), + CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), + CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), + CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), + CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), + CLK("omap_wdt", "fck", &wdt2_fck, CK_343X), + CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), + CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), + CLK("omap_wdt", "ick", &wdt2_ick, CK_343X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), + CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), + CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X), + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X), + CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X), + CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_343X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X), + CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X), + CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X), + CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X), + CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X), + CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X), + CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X), + CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X), + CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X), + CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X), + CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X), + CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_343X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), + CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X), + CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), + CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), + CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), + CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X), + CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X), + CLK(NULL, "sr1_fck", &sr1_fck, CK_343X), + CLK(NULL, "sr2_fck", &sr2_fck, CK_343X), + CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X), + CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X), + CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X), +}; + + +int __init omap2_clk_init(void) +{ + /* struct prcm_config *prcm; */ + struct omap_clk *c; + /* u32 clkrate; */ + u32 cpu_clkflg; + + if (cpu_is_omap34xx()) { + cpu_mask = RATE_IN_343X; + cpu_clkflg = CK_343X; + + /* + * Update this if there are further clock changes between ES2 + * and production parts + */ + if (omap_rev() == OMAP3430_REV_ES1_0) { + /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ + cpu_clkflg |= CK_3430ES1; + } else { + cpu_mask |= RATE_IN_3430ES2; + cpu_clkflg |= CK_3430ES2; + } + } + + clk_init(&omap2_clk_functions); + + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + clk_preinit(c->lk.clk); + + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + + /* REVISIT: Not yet ready for OMAP3 */ +#if 0 + /* Check the MPU rate set by bootloader */ + clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; +#endif + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, + (core_ck.rate / 1000000), (arm_fck.rate / 1000000)); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* + * Lock DPLL5 and put it in autoidle. + */ + if (omap_rev() >= OMAP3430_REV_ES2_0) + omap3_clk_lock_dpll5(); + + /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ + sdrc_ick_p = clk_get(NULL, "sdrc_ick"); + arm_fck_p = clk_get(NULL, "arm_fck"); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c new file mode 100644 index 000000000000..e370868a79a8 --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx.c @@ -0,0 +1,33 @@ +/* + * OMAP4-specific clock framework functions + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Rajendra Nayak (rnayak@ti.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include "clock.h" + +struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +}; + +const struct clkops clkops_noncore_dpll_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, +}; + +void omap2_clk_prepare_for_reboot(void) +{ + return; +} diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h new file mode 100644 index 000000000000..59b9ced4daa1 --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx.h @@ -0,0 +1,15 @@ +/* + * OMAP4 clock function prototypes and macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H + +#define OMAP4430_MAX_DPLL_MULT 2048 +#define OMAP4430_MAX_DPLL_DIV 128 + +extern const struct clkops clkops_noncore_dpll_ops; + +#endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c new file mode 100644 index 000000000000..2210e227d78a --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -0,0 +1,2766 @@ +/* + * OMAP4 Clock data + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> + +#include <plat/control.h> +#include <plat/clkdev_omap.h> + +#include "clock.h" +#include "clock44xx.h" +#include "cm.h" +#include "cm-regbits-44xx.h" +#include "prm.h" +#include "prm-regbits-44xx.h" + +/* Root clocks */ + +static struct clk extalt_clkin_ck = { + .name = "extalt_clkin_ck", + .rate = 59000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk pad_clks_ck = { + .name = "pad_clks_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk pad_slimbus_core_clks_ck = { + .name = "pad_slimbus_core_clks_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk secure_32k_clk_src_ck = { + .name = "secure_32k_clk_src_ck", + .rate = 32768, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk slimbus_clk = { + .name = "slimbus_clk", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk sys_32k_ck = { + .name = "sys_32k_ck", + .rate = 32768, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk virt_12000000_ck = { + .name = "virt_12000000_ck", + .ops = &clkops_null, + .rate = 12000000, +}; + +static struct clk virt_13000000_ck = { + .name = "virt_13000000_ck", + .ops = &clkops_null, + .rate = 13000000, +}; + +static struct clk virt_16800000_ck = { + .name = "virt_16800000_ck", + .ops = &clkops_null, + .rate = 16800000, +}; + +static struct clk virt_19200000_ck = { + .name = "virt_19200000_ck", + .ops = &clkops_null, + .rate = 19200000, +}; + +static struct clk virt_26000000_ck = { + .name = "virt_26000000_ck", + .ops = &clkops_null, + .rate = 26000000, +}; + +static struct clk virt_27000000_ck = { + .name = "virt_27000000_ck", + .ops = &clkops_null, + .rate = 27000000, +}; + +static struct clk virt_38400000_ck = { + .name = "virt_38400000_ck", + .ops = &clkops_null, + .rate = 38400000, +}; + +static const struct clksel_rate div_1_0_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_1_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_2_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_3_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_4_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_5_rates[] = { + { .div = 1, .val = 5, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_6_rates[] = { + { .div = 1, .val = 6, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_7_rates[] = { + { .div = 1, .val = 7, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel sys_clkin_sel[] = { + { .parent = &virt_12000000_ck, .rates = div_1_1_rates }, + { .parent = &virt_13000000_ck, .rates = div_1_2_rates }, + { .parent = &virt_16800000_ck, .rates = div_1_3_rates }, + { .parent = &virt_19200000_ck, .rates = div_1_4_rates }, + { .parent = &virt_26000000_ck, .rates = div_1_5_rates }, + { .parent = &virt_27000000_ck, .rates = div_1_6_rates }, + { .parent = &virt_38400000_ck, .rates = div_1_7_rates }, + { .parent = NULL }, +}; + +static struct clk sys_clkin_ck = { + .name = "sys_clkin_ck", + .rate = 38400000, + .clksel = sys_clkin_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_SYS_CLKSEL, + .clksel_mask = OMAP4430_SYS_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk utmi_phy_clkout_ck = { + .name = "utmi_phy_clkout_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60mhsp1_ck = { + .name = "xclk60mhsp1_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60mhsp2_ck = { + .name = "xclk60mhsp2_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60motg_ck = { + .name = "xclk60motg_ck", + .rate = 60000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +/* Module clocks and DPLL outputs */ + +static const struct clksel_rate div2_1to2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel dpll_sys_ref_clk_div[] = { + { .parent = &sys_clkin_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_sys_ref_clk = { + .name = "dpll_sys_ref_clk", + .parent = &sys_clkin_ck, + .clksel = dpll_sys_ref_clk_div, + .clksel_reg = OMAP4430_CM_DPLL_SYS_REF_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel abe_dpll_refclk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk abe_dpll_refclk_mux_ck = { + .name = "abe_dpll_refclk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = abe_dpll_refclk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_ABE_PLL_REF_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_ABE */ +static struct dpll_data dpll_abe_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_ABE, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &abe_dpll_refclk_mux_ck, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_ABE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_ABE, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_ABE, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_abe_ck = { + .name = "dpll_abe_ck", + .parent = &abe_dpll_refclk_mux_ck, + .dpll_data = &dpll_abe_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_abe_m2x2_ck = { + .name = "dpll_abe_m2x2_ck", + .parent = &dpll_abe_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk abe_24m_fclk = { + .name = "abe_24m_fclk", + .parent = &dpll_abe_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div3_1to4_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 4, .val = 2, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel abe_clk_div[] = { + { .parent = &dpll_abe_m2x2_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk abe_clk = { + .name = "abe_clk", + .parent = &dpll_abe_m2x2_ck, + .clksel = abe_clk_div, + .clksel_reg = OMAP4430_CM_CLKSEL_ABE, + .clksel_mask = OMAP4430_CLKSEL_OPP_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel aess_fclk_div[] = { + { .parent = &abe_clk, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk aess_fclk = { + .name = "aess_fclk", + .parent = &abe_clk, + .clksel = aess_fclk_div, + .clksel_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_AESS_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div31_1to31_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 3, .val = 2, .flags = RATE_IN_4430 }, + { .div = 4, .val = 3, .flags = RATE_IN_4430 }, + { .div = 5, .val = 4, .flags = RATE_IN_4430 }, + { .div = 6, .val = 5, .flags = RATE_IN_4430 }, + { .div = 7, .val = 6, .flags = RATE_IN_4430 }, + { .div = 8, .val = 7, .flags = RATE_IN_4430 }, + { .div = 9, .val = 8, .flags = RATE_IN_4430 }, + { .div = 10, .val = 9, .flags = RATE_IN_4430 }, + { .div = 11, .val = 10, .flags = RATE_IN_4430 }, + { .div = 12, .val = 11, .flags = RATE_IN_4430 }, + { .div = 13, .val = 12, .flags = RATE_IN_4430 }, + { .div = 14, .val = 13, .flags = RATE_IN_4430 }, + { .div = 15, .val = 14, .flags = RATE_IN_4430 }, + { .div = 16, .val = 15, .flags = RATE_IN_4430 }, + { .div = 17, .val = 16, .flags = RATE_IN_4430 }, + { .div = 18, .val = 17, .flags = RATE_IN_4430 }, + { .div = 19, .val = 18, .flags = RATE_IN_4430 }, + { .div = 20, .val = 19, .flags = RATE_IN_4430 }, + { .div = 21, .val = 20, .flags = RATE_IN_4430 }, + { .div = 22, .val = 21, .flags = RATE_IN_4430 }, + { .div = 23, .val = 22, .flags = RATE_IN_4430 }, + { .div = 24, .val = 23, .flags = RATE_IN_4430 }, + { .div = 25, .val = 24, .flags = RATE_IN_4430 }, + { .div = 26, .val = 25, .flags = RATE_IN_4430 }, + { .div = 27, .val = 26, .flags = RATE_IN_4430 }, + { .div = 28, .val = 27, .flags = RATE_IN_4430 }, + { .div = 29, .val = 28, .flags = RATE_IN_4430 }, + { .div = 30, .val = 29, .flags = RATE_IN_4430 }, + { .div = 31, .val = 30, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel dpll_abe_m3_div[] = { + { .parent = &dpll_abe_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_abe_m3_ck = { + .name = "dpll_abe_m3_ck", + .parent = &dpll_abe_ck, + .clksel = dpll_abe_m3_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_ABE, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel core_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &dpll_abe_m3_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk core_hsd_byp_clk_mux_ck = { + .name = "core_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = core_hsd_byp_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_BYP_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_CORE */ +static struct dpll_data dpll_core_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_CORE, + .clk_bypass = &core_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_CORE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_CORE, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_CORE, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_core_ck = { + .name = "dpll_core_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_core_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_core_m6_div[] = { + { .parent = &dpll_core_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m6_ck = { + .name = "dpll_core_m6_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dbgclk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m6_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk dbgclk_mux_ck = { + .name = "dbgclk_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m2_ck = { + .name = "dpll_core_m2_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk ddrphy_ck = { + .name = "ddrphy_ck", + .parent = &dpll_core_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m5_ck = { + .name = "dpll_core_m5_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel div_core_div[] = { + { .parent = &dpll_core_m5_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk div_core_ck = { + .name = "div_core_ck", + .parent = &dpll_core_m5_ck, + .clksel = div_core_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_CORE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div4_1to8_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 4, .val = 2, .flags = RATE_IN_4430 }, + { .div = 8, .val = 3, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel div_iva_hs_clk_div[] = { + { .parent = &dpll_core_m5_ck, .rates = div4_1to8_rates }, + { .parent = NULL }, +}; + +static struct clk div_iva_hs_clk = { + .name = "div_iva_hs_clk", + .parent = &dpll_core_m5_ck, + .clksel = div_iva_hs_clk_div, + .clksel_reg = OMAP4430_CM_BYPCLK_DPLL_IVA, + .clksel_mask = OMAP4430_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk div_mpu_hs_clk = { + .name = "div_mpu_hs_clk", + .parent = &dpll_core_m5_ck, + .clksel = div_iva_hs_clk_div, + .clksel_reg = OMAP4430_CM_BYPCLK_DPLL_MPU, + .clksel_mask = OMAP4430_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m4_ck = { + .name = "dpll_core_m4_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dll_clk_div_ck = { + .name = "dll_clk_div_ck", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_abe_m2_ck = { + .name = "dpll_abe_m2_ck", + .parent = &dpll_abe_ck, + .clksel = dpll_abe_m3_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m3_ck = { + .name = "dpll_core_m3_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m7_ck = { + .name = "dpll_core_m7_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel iva_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &div_iva_hs_clk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk iva_hsd_byp_clk_mux_ck = { + .name = "iva_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_IVA */ +static struct dpll_data dpll_iva_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_IVA, + .clk_bypass = &iva_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_IVA, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_IVA, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_IVA, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_iva_ck = { + .name = "dpll_iva_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_iva_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_iva_m4_div[] = { + { .parent = &dpll_iva_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_iva_m4_ck = { + .name = "dpll_iva_m4_ck", + .parent = &dpll_iva_ck, + .clksel = dpll_iva_m4_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_IVA, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_iva_m5_ck = { + .name = "dpll_iva_m5_ck", + .parent = &dpll_iva_ck, + .clksel = dpll_iva_m4_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_IVA, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_MPU */ +static struct dpll_data dpll_mpu_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_MPU, + .clk_bypass = &div_mpu_hs_clk, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_MPU, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_MPU, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_MPU, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_mpu_ck = { + .name = "dpll_mpu_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_mpu_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_mpu_m2_div[] = { + { .parent = &dpll_mpu_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_mpu_m2_ck = { + .name = "dpll_mpu_m2_ck", + .parent = &dpll_mpu_ck, + .clksel = dpll_mpu_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk per_hs_clk_div_ck = { + .name = "per_hs_clk_div_ck", + .parent = &dpll_abe_m3_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &per_hs_clk_div_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk per_hsd_byp_clk_mux_ck = { + .name = "per_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = per_hsd_byp_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_BYP_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_PER */ +static struct dpll_data dpll_per_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_PER, + .clk_bypass = &per_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_PER, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_PER, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_PER, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_per_ck = { + .name = "dpll_per_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_per_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_per_m2_div[] = { + { .parent = &dpll_per_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_per_m2_ck = { + .name = "dpll_per_m2_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m2x2_ck = { + .name = "dpll_per_m2x2_ck", + .parent = &dpll_per_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m3_ck = { + .name = "dpll_per_m3_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m4_ck = { + .name = "dpll_per_m4_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m5_ck = { + .name = "dpll_per_m5_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m6_ck = { + .name = "dpll_per_m6_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m7_ck = { + .name = "dpll_per_m7_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_UNIPRO */ +static struct dpll_data dpll_unipro_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_UNIPRO, + .clk_bypass = &dpll_sys_ref_clk, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_UNIPRO, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_UNIPRO, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_unipro_ck = { + .name = "dpll_unipro_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_unipro_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_unipro_m2x2_div[] = { + { .parent = &dpll_unipro_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_unipro_m2x2_ck = { + .name = "dpll_unipro_m2x2_ck", + .parent = &dpll_unipro_ck, + .clksel = dpll_unipro_m2x2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk usb_hs_clk_div_ck = { + .name = "usb_hs_clk_div_ck", + .parent = &dpll_abe_m3_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_USB */ +static struct dpll_data dpll_usb_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_USB, + .clk_bypass = &usb_hs_clk_div_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_USB, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_USB, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_USB, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_usb_ck = { + .name = "dpll_usb_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_usb_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_usb_clkdcoldo_ck = { + .name = "dpll_usb_clkdcoldo_ck", + .parent = &dpll_usb_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_usb_m2_div[] = { + { .parent = &dpll_usb_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_usb_m2_ck = { + .name = "dpll_usb_m2_ck", + .parent = &dpll_usb_ck, + .clksel = dpll_usb_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_USB, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel ducati_clk_mux_sel[] = { + { .parent = &div_core_ck, .rates = div_1_0_rates }, + { .parent = &dpll_per_m6_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk ducati_clk_mux_ck = { + .name = "ducati_clk_mux_ck", + .parent = &div_core_ck, + .clksel = ducati_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_12m_fclk = { + .name = "func_12m_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_24m_clk = { + .name = "func_24m_clk", + .parent = &dpll_per_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_24mc_fclk = { + .name = "func_24mc_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_4to8_rates[] = { + { .div = 4, .val = 0, .flags = RATE_IN_4430 }, + { .div = 8, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel func_48m_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div2_4to8_rates }, + { .parent = NULL }, +}; + +static struct clk func_48m_fclk = { + .name = "func_48m_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = func_48m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_48mc_fclk = { + .name = "func_48mc_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_2to4_rates[] = { + { .div = 2, .val = 0, .flags = RATE_IN_4430 }, + { .div = 4, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel func_64m_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div2_2to4_rates }, + { .parent = NULL }, +}; + +static struct clk func_64m_fclk = { + .name = "func_64m_fclk", + .parent = &dpll_per_m4_ck, + .clksel = func_64m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_96m_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div2_2to4_rates }, + { .parent = NULL }, +}; + +static struct clk func_96m_fclk = { + .name = "func_96m_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = func_96m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel hsmmc6_fclk_sel[] = { + { .parent = &func_64m_fclk, .rates = div_1_0_rates }, + { .parent = &func_96m_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk hsmmc6_fclk = { + .name = "hsmmc6_fclk", + .parent = &func_64m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_1to8_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 8, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel init_60m_fclk_div[] = { + { .parent = &dpll_usb_m2_ck, .rates = div2_1to8_rates }, + { .parent = NULL }, +}; + +static struct clk init_60m_fclk = { + .name = "init_60m_fclk", + .parent = &dpll_usb_m2_ck, + .clksel = init_60m_fclk_div, + .clksel_reg = OMAP4430_CM_CLKSEL_USB_60MHZ, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l3_div_div[] = { + { .parent = &div_core_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk l3_div_ck = { + .name = "l3_div_ck", + .parent = &div_core_ck, + .clksel = l3_div_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_L3_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l4_div_div[] = { + { .parent = &l3_div_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk l4_div_ck = { + .name = "l4_div_ck", + .parent = &l3_div_ck, + .clksel = l4_div_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_L4_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk lp_clk_div_ck = { + .name = "lp_clk_div_ck", + .parent = &dpll_abe_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l4_wkup_clk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &lp_clk_div_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk l4_wkup_clk_mux_ck = { + .name = "l4_wkup_clk_mux_ck", + .parent = &sys_clkin_ck, + .clksel = l4_wkup_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4_WKUP_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_abe_nc_fclk_div[] = { + { .parent = &dpll_abe_m2_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk per_abe_nc_fclk = { + .name = "per_abe_nc_fclk", + .parent = &dpll_abe_m2_ck, + .clksel = per_abe_nc_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel mcasp2_fclk_sel[] = { + { .parent = &func_96m_fclk, .rates = div_1_0_rates }, + { .parent = &per_abe_nc_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk mcasp2_fclk = { + .name = "mcasp2_fclk", + .parent = &func_96m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk mcasp3_fclk = { + .name = "mcasp3_fclk", + .parent = &func_96m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk ocp_abe_iclk = { + .name = "ocp_abe_iclk", + .parent = &aess_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk per_abe_24m_fclk = { + .name = "per_abe_24m_fclk", + .parent = &dpll_abe_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel pmd_stm_clock_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m6_ck, .rates = div_1_1_rates }, + { .parent = &dpll_per_m7_ck, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk pmd_stm_clock_mux_ck = { + .name = "pmd_stm_clock_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk pmd_trace_clk_mux_ck = { + .name = "pmd_trace_clk_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk syc_clk_div_ck = { + .name = "syc_clk_div_ck", + .parent = &sys_clkin_ck, + .clksel = dpll_sys_ref_clk_div, + .clksel_reg = OMAP4430_CM_ABE_DSS_SYS_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* Leaf clocks controlled by modules */ + +static struct clk aes1_ck = { + .name = "aes1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_AES1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk aes2_ck = { + .name = "aes2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_AES2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk aess_ck = { + .name = "aess_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &aess_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk cust_efuse_ck = { + .name = "cust_efuse_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_cefuse_clkdm", + .parent = &sys_clkin_ck, + .recalc = &followparent_recalc, +}; + +static struct clk des3des_ck = { + .name = "des3des_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_DES3DES_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel dmic_sync_mux_sel[] = { + { .parent = &abe_24m_fclk, .rates = div_1_0_rates }, + { .parent = &syc_clk_div_ck, .rates = div_1_1_rates }, + { .parent = &func_24m_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk dmic_sync_mux_ck = { + .name = "dmic_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_dmic_abe_gfclk_sel[] = { + { .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_dmic_abe_gfclk into dmic_ck */ +static struct clk dmic_ck = { + .name = "dmic_ck", + .parent = &dmic_sync_mux_ck, + .clksel = func_dmic_abe_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk dss_ck = { + .name = "dss_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_dss_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk ducati_ck = { + .name = "ducati_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ducati_clkdm", + .parent = &ducati_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk emif1_ck = { + .name = "emif1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_emif_clkdm", + .parent = &ddrphy_ck, + .recalc = &followparent_recalc, +}; + +static struct clk emif2_ck = { + .name = "emif2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_emif_clkdm", + .parent = &ddrphy_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel fdif_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +/* Merged fdif_fclk into fdif_ck */ +static struct clk fdif_ck = { + .name = "fdif_ck", + .parent = &dpll_per_m4_ck, + .clksel = fdif_fclk_div, + .clksel_reg = OMAP4430_CM_CAM_FDIF_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_FCLK_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_CAM_FDIF_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "iss_clkdm", +}; + +static const struct clksel per_sgx_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk per_sgx_fclk = { + .name = "per_sgx_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = per_sgx_fclk_div, + .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PER_192M_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel sgx_clk_mux_sel[] = { + { .parent = &dpll_core_m7_ck, .rates = div_1_0_rates }, + { .parent = &per_sgx_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged sgx_clk_mux into gfx_ck */ +static struct clk gfx_ck = { + .name = "gfx_ck", + .parent = &dpll_core_m7_ck, + .clksel = sgx_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SGX_FCLK_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_gfx_clkdm", +}; + +static struct clk gpio1_ck = { + .name = "gpio1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_ck = { + .name = "gpio2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_ck = { + .name = "gpio3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_ck = { + .name = "gpio4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_ck = { + .name = "gpio5_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_ck = { + .name = "gpio6_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpmc_ck = { + .name = "gpmc_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3_2_GPMC_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_2_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel dmt1_clk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged dmt1_clk_mux into gptimer1_ck */ +static struct clk gptimer1_ck = { + .name = "gptimer1_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", +}; + +/* Merged cm2_dm10_mux into gptimer10_ck */ +static struct clk gptimer10_ck = { + .name = "gptimer10_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm11_mux into gptimer11_ck */ +static struct clk gptimer11_ck = { + .name = "gptimer11_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm2_mux into gptimer2_ck */ +static struct clk gptimer2_ck = { + .name = "gptimer2_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm3_mux into gptimer3_ck */ +static struct clk gptimer3_ck = { + .name = "gptimer3_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm4_mux into gptimer4_ck */ +static struct clk gptimer4_ck = { + .name = "gptimer4_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static const struct clksel timer5_sync_mux_sel[] = { + { .parent = &syc_clk_div_ck, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged timer5_sync_mux into gptimer5_ck */ +static struct clk gptimer5_ck = { + .name = "gptimer5_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer6_sync_mux into gptimer6_ck */ +static struct clk gptimer6_ck = { + .name = "gptimer6_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer7_sync_mux into gptimer7_ck */ +static struct clk gptimer7_ck = { + .name = "gptimer7_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer8_sync_mux into gptimer8_ck */ +static struct clk gptimer8_ck = { + .name = "gptimer8_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged cm2_dm9_mux into gptimer9_ck */ +static struct clk gptimer9_ck = { + .name = "gptimer9_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static struct clk hdq1w_ck = { + .name = "hdq1w_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_HDQ1W_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_12m_fclk, + .recalc = &followparent_recalc, +}; + +/* Merged hsi_fclk into hsi_ck */ +static struct clk hsi_ck = { + .name = "hsi_ck", + .parent = &dpll_per_m2x2_ck, + .clksel = per_sgx_fclk_div, + .clksel_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_24_25_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +static struct clk i2c1_ck = { + .name = "i2c1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_ck = { + .name = "i2c2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_ck = { + .name = "i2c3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c4_ck = { + .name = "i2c4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk iss_ck = { + .name = "iss_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CAM_ISS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "iss_clkdm", + .parent = &ducati_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk ivahd_ck = { + .name = "ivahd_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ivahd_clkdm", + .parent = &dpll_iva_m5_ck, + .recalc = &followparent_recalc, +}; + +static struct clk keyboard_ck = { + .name = "keyboard_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk l3_instr_interconnect_ck = { + .name = "l3_instr_interconnect_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk l3_interconnect_3_ck = { + .name = "l3_interconnect_3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_L3_3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk mcasp_sync_mux_ck = { + .name = "mcasp_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcasp_abe_gfclk_sel[] = { + { .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcasp_abe_gfclk into mcasp_ck */ +static struct clk mcasp_ck = { + .name = "mcasp_ck", + .parent = &mcasp_sync_mux_ck, + .clksel = func_mcasp_abe_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp1_sync_mux_ck = { + .name = "mcbsp1_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp1_gfclk_sel[] = { + { .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp1_gfclk into mcbsp1_ck */ +static struct clk mcbsp1_ck = { + .name = "mcbsp1_ck", + .parent = &mcbsp1_sync_mux_ck, + .clksel = func_mcbsp1_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp2_sync_mux_ck = { + .name = "mcbsp2_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp2_gfclk_sel[] = { + { .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp2_gfclk into mcbsp2_ck */ +static struct clk mcbsp2_ck = { + .name = "mcbsp2_ck", + .parent = &mcbsp2_sync_mux_ck, + .clksel = func_mcbsp2_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp3_sync_mux_ck = { + .name = "mcbsp3_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp3_gfclk_sel[] = { + { .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp3_gfclk into mcbsp3_ck */ +static struct clk mcbsp3_ck = { + .name = "mcbsp3_ck", + .parent = &mcbsp3_sync_mux_ck, + .clksel = func_mcbsp3_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp4_sync_mux_ck = { + .name = "mcbsp4_sync_mux_ck", + .parent = &func_96m_fclk, + .clksel = mcasp2_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_mcbsp4_gfclk_sel[] = { + { .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged per_mcbsp4_gfclk into mcbsp4_ck */ +static struct clk mcbsp4_ck = { + .name = "mcbsp4_ck", + .parent = &mcbsp4_sync_mux_ck, + .clksel = per_mcbsp4_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_24_24_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static struct clk mcspi1_ck = { + .name = "mcspi1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_ck = { + .name = "mcspi2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_ck = { + .name = "mcspi3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_ck = { + .name = "mcspi4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +/* Merged hsmmc1_fclk into mmc1_ck */ +static struct clk mmc1_ck = { + .name = "mmc1_ck", + .parent = &func_64m_fclk, + .clksel = hsmmc6_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +/* Merged hsmmc2_fclk into mmc2_ck */ +static struct clk mmc2_ck = { + .name = "mmc2_ck", + .parent = &func_64m_fclk, + .clksel = hsmmc6_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +static struct clk mmc3_ck = { + .name = "mmc3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mmc4_ck = { + .name = "mmc4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mmc5_ck = { + .name = "mmc5_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk ocp_wp1_ck = { + .name = "ocp_wp1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk pdm_ck = { + .name = "pdm_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &pad_clks_ck, + .recalc = &followparent_recalc, +}; + +static struct clk pkaeip29_ck = { + .name = "pkaeip29_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk rng_ck = { + .name = "rng_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_RNG_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sha2md51_ck = { + .name = "sha2md51_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sl2_ck = { + .name = "sl2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_IVAHD_SL2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ivahd_clkdm", + .parent = &dpll_iva_m5_ck, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus1_ck = { + .name = "slimbus1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &ocp_abe_iclk, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus2_ck = { + .name = "slimbus2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_core_ck = { + .name = "sr_core_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_iva_ck = { + .name = "sr_iva_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_mpu_ck = { + .name = "sr_mpu_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk tesla_ck = { + .name = "tesla_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "tesla_clkdm", + .parent = &dpll_iva_m4_ck, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_ck = { + .name = "uart1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart3_ck = { + .name = "uart3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart4_ck = { + .name = "uart4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk unipro1_ck = { + .name = "unipro1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_host_ck = { + .name = "usb_host_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &init_60m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_host_fs_ck = { + .name = "usb_host_fs_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &func_48mc_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_otg_ck = { + .name = "usb_otg_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usb_tll_ck = { + .name = "usb_tll_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usbphyocp2scp_ck = { + .name = "usbphyocp2scp_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usim_ck = { + .name = "usim_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_ck = { + .name = "wdt2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_ck = { + .name = "wdt3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +/* Remaining optional clocks */ +static const struct clksel otg_60m_gfclk_sel[] = { + { .parent = &utmi_phy_clkout_ck, .rates = div_1_0_rates }, + { .parent = &xclk60motg_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk otg_60m_gfclk_ck = { + .name = "otg_60m_gfclk_ck", + .parent = &utmi_phy_clkout_ck, + .clksel = otg_60m_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_60M_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel stm_clk_div_div[] = { + { .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk stm_clk_div_ck = { + .name = "stm_clk_div_ck", + .parent = &pmd_stm_clock_mux_ck, + .clksel = stm_clk_div_div, + .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PMD_STM_CLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel trace_clk_div_div[] = { + { .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk trace_clk_div_ck = { + .name = "trace_clk_div_ck", + .parent = &pmd_trace_clk_mux_ck, + .clksel = trace_clk_div_div, + .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_14to18_rates[] = { + { .div = 14, .val = 0, .flags = RATE_IN_4430 }, + { .div = 18, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel usim_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div2_14to18_rates }, + { .parent = NULL }, +}; + +static struct clk usim_fclk = { + .name = "usim_fclk", + .parent = &dpll_per_m4_ck, + .clksel = usim_fclk_div, + .clksel_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel utmi_p1_gfclk_sel[] = { + { .parent = &init_60m_fclk, .rates = div_1_0_rates }, + { .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk utmi_p1_gfclk_ck = { + .name = "utmi_p1_gfclk_ck", + .parent = &init_60m_fclk, + .clksel = utmi_p1_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_UTMI_P1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel utmi_p2_gfclk_sel[] = { + { .parent = &init_60m_fclk, .rates = div_1_0_rates }, + { .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk utmi_p2_gfclk_ck = { + .name = "utmi_p2_gfclk_ck", + .parent = &init_60m_fclk, + .clksel = utmi_p2_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_UTMI_P2_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* + * clkdev + */ + +static struct omap_clk omap44xx_clks[] = { + CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck, CK_443X), + CLK(NULL, "pad_clks_ck", &pad_clks_ck, CK_443X), + CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck, CK_443X), + CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck, CK_443X), + CLK(NULL, "slimbus_clk", &slimbus_clk, CK_443X), + CLK(NULL, "sys_32k_ck", &sys_32k_ck, CK_443X), + CLK(NULL, "virt_12000000_ck", &virt_12000000_ck, CK_443X), + CLK(NULL, "virt_13000000_ck", &virt_13000000_ck, CK_443X), + CLK(NULL, "virt_16800000_ck", &virt_16800000_ck, CK_443X), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_443X), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_443X), + CLK(NULL, "virt_27000000_ck", &virt_27000000_ck, CK_443X), + CLK(NULL, "virt_38400000_ck", &virt_38400000_ck, CK_443X), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_443X), + CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck, CK_443X), + CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck, CK_443X), + CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck, CK_443X), + CLK(NULL, "xclk60motg_ck", &xclk60motg_ck, CK_443X), + CLK(NULL, "dpll_sys_ref_clk", &dpll_sys_ref_clk, CK_443X), + CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck, CK_443X), + CLK(NULL, "dpll_abe_ck", &dpll_abe_ck, CK_443X), + CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, CK_443X), + CLK(NULL, "abe_24m_fclk", &abe_24m_fclk, CK_443X), + CLK(NULL, "abe_clk", &abe_clk, CK_443X), + CLK(NULL, "aess_fclk", &aess_fclk, CK_443X), + CLK(NULL, "dpll_abe_m3_ck", &dpll_abe_m3_ck, CK_443X), + CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_443X), + CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_443X), + CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck, CK_443X), + CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck, CK_443X), + CLK(NULL, "ddrphy_ck", &ddrphy_ck, CK_443X), + CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_443X), + CLK(NULL, "div_core_ck", &div_core_ck, CK_443X), + CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk, CK_443X), + CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk, CK_443X), + CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_443X), + CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck, CK_443X), + CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck, CK_443X), + CLK(NULL, "dpll_core_m3_ck", &dpll_core_m3_ck, CK_443X), + CLK(NULL, "dpll_core_m7_ck", &dpll_core_m7_ck, CK_443X), + CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_iva_ck", &dpll_iva_ck, CK_443X), + CLK(NULL, "dpll_iva_m4_ck", &dpll_iva_m4_ck, CK_443X), + CLK(NULL, "dpll_iva_m5_ck", &dpll_iva_m5_ck, CK_443X), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_443X), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_443X), + CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck, CK_443X), + CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_443X), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_443X), + CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, CK_443X), + CLK(NULL, "dpll_per_m3_ck", &dpll_per_m3_ck, CK_443X), + CLK(NULL, "dpll_per_m4_ck", &dpll_per_m4_ck, CK_443X), + CLK(NULL, "dpll_per_m5_ck", &dpll_per_m5_ck, CK_443X), + CLK(NULL, "dpll_per_m6_ck", &dpll_per_m6_ck, CK_443X), + CLK(NULL, "dpll_per_m7_ck", &dpll_per_m7_ck, CK_443X), + CLK(NULL, "dpll_unipro_ck", &dpll_unipro_ck, CK_443X), + CLK(NULL, "dpll_unipro_m2x2_ck", &dpll_unipro_m2x2_ck, CK_443X), + CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X), + CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X), + CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X), + CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck, CK_443X), + CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck, CK_443X), + CLK(NULL, "func_12m_fclk", &func_12m_fclk, CK_443X), + CLK(NULL, "func_24m_clk", &func_24m_clk, CK_443X), + CLK(NULL, "func_24mc_fclk", &func_24mc_fclk, CK_443X), + CLK(NULL, "func_48m_fclk", &func_48m_fclk, CK_443X), + CLK(NULL, "func_48mc_fclk", &func_48mc_fclk, CK_443X), + CLK(NULL, "func_64m_fclk", &func_64m_fclk, CK_443X), + CLK(NULL, "func_96m_fclk", &func_96m_fclk, CK_443X), + CLK(NULL, "hsmmc6_fclk", &hsmmc6_fclk, CK_443X), + CLK(NULL, "init_60m_fclk", &init_60m_fclk, CK_443X), + CLK(NULL, "l3_div_ck", &l3_div_ck, CK_443X), + CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), + CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), + CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), + CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), + CLK(NULL, "mcasp2_fclk", &mcasp2_fclk, CK_443X), + CLK(NULL, "mcasp3_fclk", &mcasp3_fclk, CK_443X), + CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), + CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), + CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X), + CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X), + CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X), + CLK(NULL, "aes1_ck", &aes1_ck, CK_443X), + CLK(NULL, "aes2_ck", &aes2_ck, CK_443X), + CLK(NULL, "aess_ck", &aess_ck, CK_443X), + CLK(NULL, "cust_efuse_ck", &cust_efuse_ck, CK_443X), + CLK(NULL, "des3des_ck", &des3des_ck, CK_443X), + CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), + CLK(NULL, "dmic_ck", &dmic_ck, CK_443X), + CLK(NULL, "dss_ck", &dss_ck, CK_443X), + CLK(NULL, "ducati_ck", &ducati_ck, CK_443X), + CLK(NULL, "emif1_ck", &emif1_ck, CK_443X), + CLK(NULL, "emif2_ck", &emif2_ck, CK_443X), + CLK(NULL, "fdif_ck", &fdif_ck, CK_443X), + CLK(NULL, "per_sgx_fclk", &per_sgx_fclk, CK_443X), + CLK(NULL, "gfx_ck", &gfx_ck, CK_443X), + CLK(NULL, "gpio1_ck", &gpio1_ck, CK_443X), + CLK(NULL, "gpio2_ck", &gpio2_ck, CK_443X), + CLK(NULL, "gpio3_ck", &gpio3_ck, CK_443X), + CLK(NULL, "gpio4_ck", &gpio4_ck, CK_443X), + CLK(NULL, "gpio5_ck", &gpio5_ck, CK_443X), + CLK(NULL, "gpio6_ck", &gpio6_ck, CK_443X), + CLK(NULL, "gpmc_ck", &gpmc_ck, CK_443X), + CLK(NULL, "gptimer1_ck", &gptimer1_ck, CK_443X), + CLK(NULL, "gptimer10_ck", &gptimer10_ck, CK_443X), + CLK(NULL, "gptimer11_ck", &gptimer11_ck, CK_443X), + CLK(NULL, "gptimer2_ck", &gptimer2_ck, CK_443X), + CLK(NULL, "gptimer3_ck", &gptimer3_ck, CK_443X), + CLK(NULL, "gptimer4_ck", &gptimer4_ck, CK_443X), + CLK(NULL, "gptimer5_ck", &gptimer5_ck, CK_443X), + CLK(NULL, "gptimer6_ck", &gptimer6_ck, CK_443X), + CLK(NULL, "gptimer7_ck", &gptimer7_ck, CK_443X), + CLK(NULL, "gptimer8_ck", &gptimer8_ck, CK_443X), + CLK(NULL, "gptimer9_ck", &gptimer9_ck, CK_443X), + CLK("omap2_hdq.0", "ick", &hdq1w_ck, CK_443X), + CLK(NULL, "hsi_ck", &hsi_ck, CK_443X), + CLK("i2c_omap.1", "ick", &i2c1_ck, CK_443X), + CLK("i2c_omap.2", "ick", &i2c2_ck, CK_443X), + CLK("i2c_omap.3", "ick", &i2c3_ck, CK_443X), + CLK("i2c_omap.4", "ick", &i2c4_ck, CK_443X), + CLK(NULL, "iss_ck", &iss_ck, CK_443X), + CLK(NULL, "ivahd_ck", &ivahd_ck, CK_443X), + CLK(NULL, "keyboard_ck", &keyboard_ck, CK_443X), + CLK(NULL, "l3_instr_interconnect_ck", &l3_instr_interconnect_ck, CK_443X), + CLK(NULL, "l3_interconnect_3_ck", &l3_interconnect_3_ck, CK_443X), + CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), + CLK(NULL, "mcasp_ck", &mcasp_ck, CK_443X), + CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_ck, CK_443X), + CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_ck, CK_443X), + CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_ck, CK_443X), + CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_ck, CK_443X), + CLK("omap2_mcspi.1", "fck", &mcspi1_ck, CK_443X), + CLK("omap2_mcspi.2", "fck", &mcspi2_ck, CK_443X), + CLK("omap2_mcspi.3", "fck", &mcspi3_ck, CK_443X), + CLK("omap2_mcspi.4", "fck", &mcspi4_ck, CK_443X), + CLK("mmci-omap-hs.0", "fck", &mmc1_ck, CK_443X), + CLK("mmci-omap-hs.1", "fck", &mmc2_ck, CK_443X), + CLK("mmci-omap-hs.2", "fck", &mmc3_ck, CK_443X), + CLK("mmci-omap-hs.3", "fck", &mmc4_ck, CK_443X), + CLK("mmci-omap-hs.4", "fck", &mmc5_ck, CK_443X), + CLK(NULL, "ocp_wp1_ck", &ocp_wp1_ck, CK_443X), + CLK(NULL, "pdm_ck", &pdm_ck, CK_443X), + CLK(NULL, "pkaeip29_ck", &pkaeip29_ck, CK_443X), + CLK("omap_rng", "ick", &rng_ck, CK_443X), + CLK(NULL, "sha2md51_ck", &sha2md51_ck, CK_443X), + CLK(NULL, "sl2_ck", &sl2_ck, CK_443X), + CLK(NULL, "slimbus1_ck", &slimbus1_ck, CK_443X), + CLK(NULL, "slimbus2_ck", &slimbus2_ck, CK_443X), + CLK(NULL, "sr_core_ck", &sr_core_ck, CK_443X), + CLK(NULL, "sr_iva_ck", &sr_iva_ck, CK_443X), + CLK(NULL, "sr_mpu_ck", &sr_mpu_ck, CK_443X), + CLK(NULL, "tesla_ck", &tesla_ck, CK_443X), + CLK(NULL, "uart1_ck", &uart1_ck, CK_443X), + CLK(NULL, "uart2_ck", &uart2_ck, CK_443X), + CLK(NULL, "uart3_ck", &uart3_ck, CK_443X), + CLK(NULL, "uart4_ck", &uart4_ck, CK_443X), + CLK(NULL, "unipro1_ck", &unipro1_ck, CK_443X), + CLK(NULL, "usb_host_ck", &usb_host_ck, CK_443X), + CLK(NULL, "usb_host_fs_ck", &usb_host_fs_ck, CK_443X), + CLK("musb_hdrc", "ick", &usb_otg_ck, CK_443X), + CLK(NULL, "usb_tll_ck", &usb_tll_ck, CK_443X), + CLK(NULL, "usbphyocp2scp_ck", &usbphyocp2scp_ck, CK_443X), + CLK(NULL, "usim_ck", &usim_ck, CK_443X), + CLK("omap_wdt", "fck", &wdt2_ck, CK_443X), + CLK(NULL, "wdt3_ck", &wdt3_ck, CK_443X), + CLK(NULL, "otg_60m_gfclk_ck", &otg_60m_gfclk_ck, CK_443X), + CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), + CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X), + CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), + CLK(NULL, "utmi_p1_gfclk_ck", &utmi_p1_gfclk_ck, CK_443X), + CLK(NULL, "utmi_p2_gfclk_ck", &utmi_p2_gfclk_ck, CK_443X), +}; + +int __init omap2_clk_init(void) +{ + /* struct prcm_config *prcm; */ + struct omap_clk *c; + /* u32 clkrate; */ + u32 cpu_clkflg; + + if (cpu_is_omap44xx()) { + cpu_mask = RATE_IN_4430; + cpu_clkflg = CK_443X; + } + + clk_init(&omap2_clk_functions); + + for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); + c++) + clk_preinit(c->lk.clk); + + for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); + c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + /* TODO + omap2_init_clk_clkdm(c->lk.clk); + */ + } + + recalculate_root_clocks(); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c new file mode 100644 index 000000000000..f69096b88cdb --- /dev/null +++ b/arch/arm/mach-omap2/clock_common_data.c @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-omap2/clock_common_data.c + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains clock data that is common to both the OMAP2xxx and + * OMAP3xxx clock definition files. + */ + +#include "clock.h" + +/* clksel_rate data common to 24xx/343x */ +const struct clksel_rate gpt_32k_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +const struct clksel_rate gpt_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +const struct clksel_rate gfx_l3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 0 } +}; + diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index fcd82320a6a3..1a45ed1e8ba1 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -2,7 +2,7 @@ * OMAP2/3 clockdomain framework functions * * Copyright (C) 2008 Texas Instruments, Inc. - * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2008-2009 Nokia Corporation * * Written by Paul Walmsley and Jouni Högander * @@ -10,9 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN -# define DEBUG -#endif +#undef DEBUG #include <linux/module.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h new file mode 100644 index 000000000000..0e67f75aa35c --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-44xx.h @@ -0,0 +1,1474 @@ +/* + * OMAP44xx Clock Management register bits + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H + +#include "cm.h" + + +/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ +#define OMAP4430_ABE_DYNDEP_SHIFT (1 << 3) +#define OMAP4430_ABE_DYNDEP_MASK BITFIELD(3, 3) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_ABE_STATDEP_SHIFT (1 << 3) +#define OMAP4430_ABE_STATDEP_MASK BITFIELD(3, 3) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_ALWONCORE_DYNDEP_SHIFT (1 << 16) +#define OMAP4430_ALWONCORE_DYNDEP_MASK BITFIELD(16, 16) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ +#define OMAP4430_ALWONCORE_STATDEP_SHIFT (1 << 16) +#define OMAP4430_ALWONCORE_STATDEP_MASK BITFIELD(16, 16) + +/* + * Used by CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB, + * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, + * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU + */ +#define OMAP4430_AUTO_DPLL_MODE_SHIFT (1 << 0) +#define OMAP4430_AUTO_DPLL_MODE_MASK BITFIELD(0, 2) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_CEFUSE_DYNDEP_SHIFT (1 << 17) +#define OMAP4430_CEFUSE_DYNDEP_MASK BITFIELD(17, 17) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ +#define OMAP4430_CEFUSE_STATDEP_SHIFT (1 << 17) +#define OMAP4430_CEFUSE_STATDEP_MASK BITFIELD(17, 17) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK BITFIELD(9, 9) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK BITFIELD(11, 11) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK BITFIELD(13, 13) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK BITFIELD(9, 9) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK BITFIELD(12, 12) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT (1 << 14) +#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK BITFIELD(14, 14) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK BITFIELD(9, 9) + +/* Used by CM_DUCATI_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT (1 << 15) +#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK BITFIELD(15, 15) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT (1 << 20) +#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK BITFIELD(20, 20) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT (1 << 26) +#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK BITFIELD(26, 26) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT (1 << 21) +#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK BITFIELD(21, 21) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT (1 << 27) +#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK BITFIELD(27, 27) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT (1 << 31) +#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK BITFIELD(31, 31) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK BITFIELD(12, 12) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT (1 << 28) +#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK BITFIELD(28, 28) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT (1 << 29) +#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK BITFIELD(29, 29) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT (1 << 16) +#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK BITFIELD(16, 16) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT (1 << 17) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK BITFIELD(17, 17) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT (1 << 18) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK BITFIELD(18, 18) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT (1 << 19) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK BITFIELD(19, 19) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK BITFIELD(8, 8) + +/* Used by CM_IVAHD_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT (1 << 14) +#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK BITFIELD(14, 14) + +/* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_D2D_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_SDMA_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_GFX_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INSTR_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4SEC_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK BITFIELD(8, 8) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_D2D_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4SEC_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK BITFIELD(12, 12) + +/* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT (1 << 16) +#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK BITFIELD(16, 16) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT (1 << 17) +#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK BITFIELD(17, 17) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT (1 << 18) +#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK BITFIELD(18, 18) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT (1 << 19) +#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK BITFIELD(19, 19) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT (1 << 25) +#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK BITFIELD(25, 25) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT (1 << 20) +#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK BITFIELD(20, 20) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT (1 << 21) +#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK BITFIELD(21, 21) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT (1 << 22) +#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK BITFIELD(22, 22) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT (1 << 24) +#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK BITFIELD(24, 24) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_GFX_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK BITFIELD(11, 11) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK BITFIELD(10, 10) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_TESLA_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT (1 << 22) +#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK BITFIELD(22, 22) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT (1 << 23) +#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK BITFIELD(23, 23) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT (1 << 24) +#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT (1 << 15) +#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK BITFIELD(15, 15) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT (1 << 30) +#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK BITFIELD(30, 30) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT (1 << 25) +#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK BITFIELD(25, 25) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK BITFIELD(11, 11) + +/* + * Used by CM_WKUP_TIMER1_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, + * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, + * CM1_ABE_TIMER8_CLKCTRL + */ +#define OMAP4430_CLKSEL_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_MASK BITFIELD(24, 24) + +/* + * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL, + * CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT, + * CM_CLKSEL_USB_60MHZ + */ +#define OMAP4430_CLKSEL_0_0_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_0_0_MASK BITFIELD(0, 0) + +/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */ +#define OMAP4430_CLKSEL_0_1_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_0_1_MASK BITFIELD(0, 1) + +/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */ +#define OMAP4430_CLKSEL_24_25_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_24_25_MASK BITFIELD(24, 25) + +/* Used by CM_L3INIT_USB_OTG_CLKCTRL */ +#define OMAP4430_CLKSEL_60M_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_60M_MASK BITFIELD(24, 24) + +/* Used by CM1_ABE_AESS_CLKCTRL */ +#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_AESS_FCLK_MASK BITFIELD(24, 24) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_CORE_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_CORE_MASK BITFIELD(0, 0) + +/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_CLKSEL_CORE_1_1_SHIFT (1 << 1) +#define OMAP4430_CLKSEL_CORE_1_1_MASK BITFIELD(1, 1) + +/* Used by CM_WKUP_USIM_CLKCTRL */ +#define OMAP4430_CLKSEL_DIV_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_DIV_MASK BITFIELD(24, 24) + +/* Used by CM_CAM_FDIF_CLKCTRL */ +#define OMAP4430_CLKSEL_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_FCLK_MASK BITFIELD(24, 25) + +/* Used by CM_L4PER_MCBSP4_CLKCTRL */ +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK BITFIELD(25, 25) + +/* + * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL, + * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, + * CM1_ABE_MCBSP3_CLKCTRL + */ +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT (1 << 26) +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK BITFIELD(26, 27) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_L3_SHIFT (1 << 4) +#define OMAP4430_CLKSEL_L3_MASK BITFIELD(4, 4) + +/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT (1 << 2) +#define OMAP4430_CLKSEL_L3_SHADOW_MASK BITFIELD(2, 2) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_L4_SHIFT (1 << 8) +#define OMAP4430_CLKSEL_L4_MASK BITFIELD(8, 8) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_CLKSEL_OPP_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_OPP_MASK BITFIELD(0, 1) + +/* Used by CM_GFX_GFX_CLKCTRL */ +#define OMAP4430_CLKSEL_PER_192M_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_PER_192M_MASK BITFIELD(25, 26) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT (1 << 27) +#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK BITFIELD(27, 29) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK BITFIELD(24, 26) + +/* Used by CM_GFX_GFX_CLKCTRL */ +#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SGX_FCLK_MASK BITFIELD(24, 24) + +/* + * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, + * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL + */ +#define OMAP4430_CLKSEL_SOURCE_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SOURCE_MASK BITFIELD(24, 25) + +/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */ +#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SOURCE_24_24_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_CLKSEL_UTMI_P1_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_UTMI_P1_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_CLKSEL_UTMI_P2_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_UTMI_P2_MASK BITFIELD(25, 25) + +/* + * Used by CM_WKUP_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_D2D_CLKSTCTRL, + * CM_DUCATI_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL, + * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_MEMIF_CLKSTCTRL, + * CM_SDMA_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL, + * CM_L3INIT_CLKSTCTRL, CM_CAM_CLKSTCTRL, CM_CEFUSE_CLKSTCTRL, + * CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3_1_CLKSTCTRL_RESTORE, + * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL_RESTORE, + * CM_L4PER_CLKSTCTRL_RESTORE, CM_MEMIF_CLKSTCTRL_RESTORE, CM_ALWON_CLKSTCTRL, + * CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL, + * CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE + */ +#define OMAP4430_CLKTRCTRL_SHIFT (1 << 0) +#define OMAP4430_CLKTRCTRL_MASK BITFIELD(0, 1) + +/* Used by CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT (1 << 0) +#define OMAP4430_CORE_DPLL_EMU_DIV_MASK BITFIELD(0, 6) + +/* Used by CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT (1 << 8) +#define OMAP4430_CORE_DPLL_EMU_MULT_MASK BITFIELD(8, 18) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_D2D_DYNDEP_SHIFT (1 << 18) +#define OMAP4430_D2D_DYNDEP_MASK BITFIELD(18, 18) + +/* Used by CM_MPU_STATICDEP */ +#define OMAP4430_D2D_STATDEP_SHIFT (1 << 18) +#define OMAP4430_D2D_STATDEP_MASK BITFIELD(18, 18) + +/* + * Used by CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO, + * CM_SSC_DELTAMSTEP_DPLL_USB, CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE, + * CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE, + * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA, + * CM_SSC_DELTAMSTEP_DPLL_MPU + */ +#define OMAP4430_DELTAMSTEP_SHIFT (1 << 0) +#define OMAP4430_DELTAMSTEP_MASK BITFIELD(0, 19) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DLL_OVERRIDE_SHIFT (1 << 2) +#define OMAP4430_DLL_OVERRIDE_MASK BITFIELD(2, 2) + +/* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */ +#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT (1 << 0) +#define OMAP4430_DLL_OVERRIDE_0_0_MASK BITFIELD(0, 0) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DLL_RESET_SHIFT (1 << 3) +#define OMAP4430_DLL_RESET_MASK BITFIELD(3, 3) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT (1 << 23) +#define OMAP4430_DPLL_BYP_CLKSEL_MASK BITFIELD(23, 23) + +/* Used by CM_CLKDCOLDO_DPLL_USB */ +#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */ +#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT (1 << 20) +#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK BITFIELD(20, 20) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */ +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT (1 << 10) +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BITFIELD(10, 10) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUT_DIV_MASK BITFIELD(0, 4) + +/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */ +#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK BITFIELD(0, 6) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK BITFIELD(5, 5) + +/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */ +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT (1 << 7) +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK BITFIELD(7, 7) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE, + * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT (1 << 8) +#define OMAP4430_DPLL_CORE_DPLL_EN_MASK BITFIELD(8, 10) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT (1 << 11) +#define OMAP4430_DPLL_CORE_M2_DIV_MASK BITFIELD(11, 15) + +/* Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT (1 << 3) +#define OMAP4430_DPLL_CORE_M5_DIV_MASK BITFIELD(3, 7) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT (1 << 1) +#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK BITFIELD(1, 1) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_DIV_MASK BITFIELD(0, 6) + +/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_DIV_0_7_SHIFT (1 << 0) +#define OMAP4430_DPLL_DIV_0_7_MASK BITFIELD(0, 7) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT (1 << 8) +#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK BITFIELD(8, 8) + +/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */ +#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT (1 << 3) +#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK BITFIELD(3, 3) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_EN_SHIFT (1 << 0) +#define OMAP4430_DPLL_EN_MASK BITFIELD(0, 2) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_LPMODE_EN_SHIFT (1 << 10) +#define OMAP4430_DPLL_LPMODE_EN_MASK BITFIELD(10, 10) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_MULT_SHIFT (1 << 8) +#define OMAP4430_DPLL_MULT_MASK BITFIELD(8, 18) + +/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_MULT_USB_SHIFT (1 << 8) +#define OMAP4430_DPLL_MULT_USB_MASK BITFIELD(8, 19) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_REGM4XEN_SHIFT (1 << 11) +#define OMAP4430_DPLL_REGM4XEN_MASK BITFIELD(11, 11) + +/* Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_SD_DIV_SHIFT (1 << 24) +#define OMAP4430_DPLL_SD_DIV_MASK BITFIELD(24, 31) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_ACK_SHIFT (1 << 13) +#define OMAP4430_DPLL_SSC_ACK_MASK BITFIELD(13, 13) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT (1 << 14) +#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK BITFIELD(14, 14) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_EN_SHIFT (1 << 12) +#define OMAP4430_DPLL_SSC_EN_MASK BITFIELD(12, 12) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_DSS_DYNDEP_SHIFT (1 << 8) +#define OMAP4430_DSS_DYNDEP_MASK BITFIELD(8, 8) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP + */ +#define OMAP4430_DSS_STATDEP_SHIFT (1 << 8) +#define OMAP4430_DSS_STATDEP_MASK BITFIELD(8, 8) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_DUCATI_DYNDEP_SHIFT (1 << 0) +#define OMAP4430_DUCATI_DYNDEP_MASK BITFIELD(0, 0) + +/* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */ +#define OMAP4430_DUCATI_STATDEP_SHIFT (1 << 0) +#define OMAP4430_DUCATI_STATDEP_MASK BITFIELD(0, 0) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_FREQ_UPDATE_SHIFT (1 << 0) +#define OMAP4430_FREQ_UPDATE_MASK BITFIELD(0, 0) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_GFX_DYNDEP_SHIFT (1 << 10) +#define OMAP4430_GFX_DYNDEP_MASK BITFIELD(10, 10) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_GFX_STATDEP_SHIFT (1 << 10) +#define OMAP4430_GFX_STATDEP_MASK BITFIELD(10, 10) + +/* Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT (1 << 0) +#define OMAP4430_GPMC_FREQ_UPDATE_MASK BITFIELD(0, 0) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, + * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, + * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, + * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, + * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, + * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, + * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, + * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, + * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, + * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, + * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, + * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, + * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, + * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, + * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, + * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, + * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, + * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, + * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE, + * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, + * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL, + * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL, + * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, + * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL, + * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL, + * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, + * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL + */ +#define OMAP4430_IDLEST_SHIFT (1 << 16) +#define OMAP4430_IDLEST_MASK BITFIELD(16, 17) + +/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_ISS_DYNDEP_SHIFT (1 << 9) +#define OMAP4430_ISS_DYNDEP_MASK BITFIELD(9, 9) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_ISS_STATDEP_SHIFT (1 << 9) +#define OMAP4430_ISS_STATDEP_MASK BITFIELD(9, 9) + +/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ +#define OMAP4430_IVAHD_DYNDEP_SHIFT (1 << 2) +#define OMAP4430_IVAHD_DYNDEP_MASK BITFIELD(2, 2) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_IVAHD_STATDEP_SHIFT (1 << 2) +#define OMAP4430_IVAHD_STATDEP_MASK BITFIELD(2, 2) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_L3INIT_DYNDEP_SHIFT (1 << 7) +#define OMAP4430_L3INIT_DYNDEP_MASK BITFIELD(7, 7) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3INIT_STATDEP_SHIFT (1 << 7) +#define OMAP4430_L3INIT_STATDEP_MASK BITFIELD(7, 7) + +/* + * Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, + * CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + */ +#define OMAP4430_L3_1_DYNDEP_SHIFT (1 << 5) +#define OMAP4430_L3_1_DYNDEP_MASK BITFIELD(5, 5) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3_1_STATDEP_SHIFT (1 << 5) +#define OMAP4430_L3_1_STATDEP_MASK BITFIELD(5, 5) + +/* + * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_SDMA_DYNAMICDEP, + * CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, + * CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP + */ +#define OMAP4430_L3_2_DYNDEP_SHIFT (1 << 6) +#define OMAP4430_L3_2_DYNDEP_MASK BITFIELD(6, 6) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3_2_STATDEP_SHIFT (1 << 6) +#define OMAP4430_L3_2_STATDEP_MASK BITFIELD(6, 6) + +/* Used by CM_L3_1_DYNAMICDEP */ +#define OMAP4430_L4CFG_DYNDEP_SHIFT (1 << 12) +#define OMAP4430_L4CFG_DYNDEP_MASK BITFIELD(12, 12) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_L4CFG_STATDEP_SHIFT (1 << 12) +#define OMAP4430_L4CFG_STATDEP_MASK BITFIELD(12, 12) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_L4PER_DYNDEP_SHIFT (1 << 13) +#define OMAP4430_L4PER_DYNDEP_MASK BITFIELD(13, 13) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L4PER_STATDEP_SHIFT (1 << 13) +#define OMAP4430_L4PER_STATDEP_MASK BITFIELD(13, 13) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_L4SEC_DYNDEP_SHIFT (1 << 14) +#define OMAP4430_L4SEC_DYNDEP_MASK BITFIELD(14, 14) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP + */ +#define OMAP4430_L4SEC_STATDEP_SHIFT (1 << 14) +#define OMAP4430_L4SEC_STATDEP_MASK BITFIELD(14, 14) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_L4WKUP_DYNDEP_SHIFT (1 << 15) +#define OMAP4430_L4WKUP_DYNDEP_MASK BITFIELD(15, 15) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L4WKUP_STATDEP_SHIFT (1 << 15) +#define OMAP4430_L4WKUP_STATDEP_MASK BITFIELD(15, 15) + +/* + * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_MPU_DYNAMICDEP + */ +#define OMAP4430_MEMIF_DYNDEP_SHIFT (1 << 4) +#define OMAP4430_MEMIF_DYNDEP_MASK BITFIELD(4, 4) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_MEMIF_STATDEP_SHIFT (1 << 4) +#define OMAP4430_MEMIF_STATDEP_MASK BITFIELD(4, 4) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, + * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, + * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, + * CM_SSC_MODFREQDIV_DPLL_MPU + */ +#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT (1 << 8) +#define OMAP4430_MODFREQDIV_EXPONENT_MASK BITFIELD(8, 10) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, + * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, + * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, + * CM_SSC_MODFREQDIV_DPLL_MPU + */ +#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT (1 << 0) +#define OMAP4430_MODFREQDIV_MANTISSA_MASK BITFIELD(0, 6) + +/* + * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, + * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, + * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, + * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, + * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, + * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, + * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, + * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, + * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, + * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, + * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, + * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, + * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, + * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, + * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, + * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, + * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, + * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, + * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE, + * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, + * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL, + * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL, + * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, + * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL, + * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL, + * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, + * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL + */ +#define OMAP4430_MODULEMODE_SHIFT (1 << 0) +#define OMAP4430_MODULEMODE_MASK BITFIELD(0, 1) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_BANDGAP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_CLK32K_MASK BITFIELD(9, 9) + +/* Used by CM_CAM_ISS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK BITFIELD(8, 8) + +/* + * Used by CM_WKUP_GPIO1_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE + */ +#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DBCLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DSSCLK_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_FCLK0_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_FCLK1_MASK BITFIELD(9, 9) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_FCLK2_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT (1 << 15) +#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK BITFIELD(15, 15) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT (1 << 13) +#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK BITFIELD(13, 13) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT (1 << 14) +#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK BITFIELD(14, 14) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT (1 << 12) +#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_PHY_48M_MASK BITFIELD(8, 8) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK BITFIELD(10, 10) + +/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK BITFIELD(11, 11) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_TV_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_OTG_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_XCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_XCLK_MASK BITFIELD(8, 8) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_OVERRIDE_ENABLE_SHIFT (1 << 19) +#define OMAP4430_OVERRIDE_ENABLE_MASK BITFIELD(19, 19) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_PAD_CLKS_GATE_SHIFT (1 << 8) +#define OMAP4430_PAD_CLKS_GATE_MASK BITFIELD(8, 8) + +/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */ +#define OMAP4430_PERF_CURRENT_SHIFT (1 << 0) +#define OMAP4430_PERF_CURRENT_MASK BITFIELD(0, 7) + +/* + * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3, + * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD, + * CM_IVA_DVFS_PERF_TESLA + */ +#define OMAP4430_PERF_REQ_SHIFT (1 << 0) +#define OMAP4430_PERF_REQ_MASK BITFIELD(0, 7) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER */ +#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT (1 << 0) +#define OMAP4430_PER_DPLL_EMU_DIV_MASK BITFIELD(0, 6) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER */ +#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT (1 << 8) +#define OMAP4430_PER_DPLL_EMU_MULT_MASK BITFIELD(8, 18) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE1_COMPLETED_SHIFT (1 << 0) +#define OMAP4430_PHASE1_COMPLETED_MASK BITFIELD(0, 0) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE2A_COMPLETED_SHIFT (1 << 1) +#define OMAP4430_PHASE2A_COMPLETED_MASK BITFIELD(1, 1) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE2B_COMPLETED_SHIFT (1 << 2) +#define OMAP4430_PHASE2B_COMPLETED_MASK BITFIELD(2, 2) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT (1 << 20) +#define OMAP4430_PMD_STM_MUX_CTRL_MASK BITFIELD(20, 21) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT (1 << 22) +#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK BITFIELD(22, 23) + +/* Used by CM_DYN_DEP_PRESCAL */ +#define OMAP4430_PRESCAL_SHIFT (1 << 0) +#define OMAP4430_PRESCAL_MASK BITFIELD(0, 5) + +/* Used by REVISION_CM2, REVISION_CM1 */ +#define OMAP4430_REV_SHIFT (1 << 0) +#define OMAP4430_REV_MASK BITFIELD(0, 7) + +/* + * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE + */ +#define OMAP4430_SAR_MODE_SHIFT (1 << 4) +#define OMAP4430_SAR_MODE_MASK BITFIELD(4, 4) + +/* Used by CM_SCALE_FCLK */ +#define OMAP4430_SCALE_FCLK_SHIFT (1 << 0) +#define OMAP4430_SCALE_FCLK_MASK BITFIELD(0, 0) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_SDMA_DYNDEP_SHIFT (1 << 11) +#define OMAP4430_SDMA_DYNDEP_MASK BITFIELD(11, 11) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_SDMA_STATDEP_SHIFT (1 << 11) +#define OMAP4430_SDMA_STATDEP_MASK BITFIELD(11, 11) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT (1 << 10) +#define OMAP4430_SLIMBUS_CLK_GATE_MASK BITFIELD(10, 10) + +/* + * Used by CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, + * CM_DUCATI_DUCATI_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL, + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, + * CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL + */ +#define OMAP4430_STBYST_SHIFT (1 << 18) +#define OMAP4430_STBYST_MASK BITFIELD(18, 18) + +/* + * Used by CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB, + * CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY, + * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU + */ +#define OMAP4430_ST_DPLL_CLK_SHIFT (1 << 0) +#define OMAP4430_ST_DPLL_CLK_MASK BITFIELD(0, 0) + +/* Used by CM_CLKDCOLDO_DPLL_USB */ +#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE, + * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_ST_DPLL_CLKOUT_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKOUT_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK BITFIELD(9, 9) + +/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */ +#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT (1 << 11) +#define OMAP4430_ST_DPLL_CLKOUTX2_MASK BITFIELD(11, 11) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK BITFIELD(9, 9) + +/* Used by CM_SYS_CLKSEL */ +#define OMAP4430_SYS_CLKSEL_SHIFT (1 << 0) +#define OMAP4430_SYS_CLKSEL_MASK BITFIELD(0, 2) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_TESLA_DYNDEP_SHIFT (1 << 1) +#define OMAP4430_TESLA_DYNDEP_MASK BITFIELD(1, 1) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_TESLA_STATDEP_SHIFT (1 << 1) +#define OMAP4430_TESLA_STATDEP_MASK BITFIELD(1, 1) + +/* + * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + */ +#define OMAP4430_WINDOWSIZE_SHIFT (1 << 24) +#define OMAP4430_WINDOWSIZE_MASK BITFIELD(24, 27) +#endif diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c index 8eb2dab8c7db..58e4a1c557d8 100644 --- a/arch/arm/mach-omap2/cm.c +++ b/arch/arm/mach-omap2/cm.c @@ -21,6 +21,8 @@ #include <asm/atomic.h> +#include <plat/common.h> + #include "cm.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" @@ -61,9 +63,8 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) mask = 1 << idlest_shift; /* XXX should be OMAP2 CM */ - while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) && - (i++ < MAX_MODULE_READY_TIME)) - udelay(1); + omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena), + MAX_MODULE_READY_TIME, i); return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a2fcfcc253cc..90a4086fbdf4 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -4,8 +4,8 @@ /* * OMAP2/3 Clock Management (CM) register definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley * @@ -22,6 +22,12 @@ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) +#define OMAP44XX_CM1_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (module) + (reg)) +#define OMAP44XX_CM2_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (module) + (reg)) + +#include "cm44xx.h" /* * Architecture-specific global CM registers @@ -89,6 +95,11 @@ #define OMAP3430_CM_CLKSEL2_EMU 0x0050 #define OMAP3430_CM_CLKSEL3_EMU 0x0054 +/* CM2.CEFUSE_CM2 register offsets */ + +/* OMAP4 modulemode control */ +#define OMAP4430_MODULEMODE_HWCTRL 0 +#define OMAP4430_MODULEMODE_SWCTRL 1 /* Clock management domain register get/set */ diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h new file mode 100644 index 000000000000..c575b9b0c041 --- /dev/null +++ b/arch/arm/mach-omap2/cm44xx.h @@ -0,0 +1,358 @@ +/* + * OMAP44xx CM1 & CM2 instance offset macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM44XX_H +#define __ARCH_ARM_MACH_OMAP2_CM44XX_H + + +/* CM1 */ + + +/* CM1.OCP_SOCKET_CM1 register offsets */ +#define OMAP4430_REVISION_CM1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_CM_CM1_PROFILING_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040) + +/* CM1.CKGEN_CM1 register offsets */ +#define OMAP4430_CM_CLKSEL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_CLKSEL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_DLL_CTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010) +#define OMAP4430_CM_CLKMODE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020) +#define OMAP4430_CM_IDLEST_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024) +#define OMAP4430_CM_AUTOIDLE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028) +#define OMAP4430_CM_CLKSEL_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c) +#define OMAP4430_CM_DIV_M2_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030) +#define OMAP4430_CM_DIV_M3_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034) +#define OMAP4430_CM_DIV_M4_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038) +#define OMAP4430_CM_DIV_M5_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c) +#define OMAP4430_CM_DIV_M6_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040) +#define OMAP4430_CM_DIV_M7_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c) +#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050) +#define OMAP4430_CM_CLKMODE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060) +#define OMAP4430_CM_IDLEST_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064) +#define OMAP4430_CM_AUTOIDLE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068) +#define OMAP4430_CM_CLKSEL_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c) +#define OMAP4430_CM_DIV_M2_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c) +#define OMAP4430_CM_BYPCLK_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c) +#define OMAP4430_CM_CLKMODE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0) +#define OMAP4430_CM_IDLEST_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4) +#define OMAP4430_CM_AUTOIDLE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8) +#define OMAP4430_CM_CLKSEL_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac) +#define OMAP4430_CM_DIV_M4_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8) +#define OMAP4430_CM_DIV_M5_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc) +#define OMAP4430_CM_BYPCLK_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc) +#define OMAP4430_CM_CLKMODE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0) +#define OMAP4430_CM_IDLEST_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4) +#define OMAP4430_CM_AUTOIDLE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8) +#define OMAP4430_CM_CLKSEL_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec) +#define OMAP4430_CM_DIV_M2_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0) +#define OMAP4430_CM_DIV_M3_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c) +#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120) +#define OMAP4430_CM_IDLEST_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124) +#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128) +#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c) +#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130) +#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138) +#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c) +#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG2 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164) +#define OMAP4430_CM_DYN_DEP_PRESCAL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170) +#define OMAP4430_CM_RESTORE_ST OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180) + +/* CM1.MPU_CM1 register offsets */ +#define OMAP4430_CM_MPU_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000) +#define OMAP4430_CM_MPU_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004) +#define OMAP4430_CM_MPU_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008) +#define OMAP4430_CM_MPU_MPU_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020) + +/* CM1.TESLA_CM1 register offsets */ +#define OMAP4430_CM_TESLA_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000) +#define OMAP4430_CM_TESLA_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004) +#define OMAP4430_CM_TESLA_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008) +#define OMAP4430_CM_TESLA_TESLA_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020) + +/* CM1.ABE_CM1 register offsets */ +#define OMAP4430_CM1_ABE_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000) +#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020) +#define OMAP4430_CM1_ABE_AESS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028) +#define OMAP4430_CM1_ABE_PDM_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030) +#define OMAP4430_CM1_ABE_DMIC_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038) +#define OMAP4430_CM1_ABE_MCASP_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040) +#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048) +#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050) +#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058) +#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060) +#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068) +#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070) +#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078) +#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080) +#define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088) + +/* CM1.RESTORE_CM1 register offsets */ +#define OMAP4430_CM_CLKSEL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000) +#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004) +#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008) +#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c) +#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010) +#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014) +#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018) +#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024) +#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c) +#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030) +#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034) + +/* CM2 */ + + +/* CM2.OCP_SOCKET_CM2 register offsets */ +#define OMAP4430_REVISION_CM2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_CM_CM2_PROFILING_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040) + +/* CM2.CKGEN_CM2 register offsets */ +#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_CLKSEL_USB_60MHZ OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004) +#define OMAP4430_CM_SCALE_FCLK OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_CORE_DVFS_PERF1 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010) +#define OMAP4430_CM_CORE_DVFS_PERF2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014) +#define OMAP4430_CM_CORE_DVFS_PERF3 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018) +#define OMAP4430_CM_CORE_DVFS_PERF4 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c) +#define OMAP4430_CM_CORE_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024) +#define OMAP4430_CM_IVA_DVFS_PERF_TESLA OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028) +#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c) +#define OMAP4430_CM_IVA_DVFS_PERF_ABE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030) +#define OMAP4430_CM_IVA_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038) +#define OMAP4430_CM_CLKMODE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040) +#define OMAP4430_CM_IDLEST_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044) +#define OMAP4430_CM_AUTOIDLE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048) +#define OMAP4430_CM_CLKSEL_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c) +#define OMAP4430_CM_DIV_M2_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050) +#define OMAP4430_CM_DIV_M3_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054) +#define OMAP4430_CM_DIV_M4_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058) +#define OMAP4430_CM_DIV_M5_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c) +#define OMAP4430_CM_DIV_M6_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060) +#define OMAP4430_CM_DIV_M7_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c) +#define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070) +#define OMAP4430_CM_CLKMODE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080) +#define OMAP4430_CM_IDLEST_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084) +#define OMAP4430_CM_AUTOIDLE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088) +#define OMAP4430_CM_CLKSEL_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c) +#define OMAP4430_CM_DIV_M2_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac) +#define OMAP4430_CM_CLKDCOLDO_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4) +#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0) +#define OMAP4430_CM_IDLEST_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4) +#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8) +#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc) +#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec) + +/* CM2.ALWAYS_ON_CM2 register offsets */ +#define OMAP4430_CM_ALWON_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000) +#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020) +#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028) +#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030) +#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038) + +/* CM2.CORE_CM2 register offsets */ +#define OMAP4430_CM_L3_1_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000) +#define OMAP4430_CM_L3_1_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008) +#define OMAP4430_CM_L3_1_L3_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020) +#define OMAP4430_CM_L3_2_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100) +#define OMAP4430_CM_L3_2_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108) +#define OMAP4430_CM_L3_2_L3_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120) +#define OMAP4430_CM_L3_2_GPMC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128) +#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130) +#define OMAP4430_CM_DUCATI_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200) +#define OMAP4430_CM_DUCATI_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204) +#define OMAP4430_CM_DUCATI_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208) +#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220) +#define OMAP4430_CM_SDMA_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300) +#define OMAP4430_CM_SDMA_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304) +#define OMAP4430_CM_SDMA_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308) +#define OMAP4430_CM_SDMA_SDMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320) +#define OMAP4430_CM_MEMIF_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400) +#define OMAP4430_CM_MEMIF_DMM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420) +#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428) +#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430) +#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438) +#define OMAP4430_CM_MEMIF_DLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440) +#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450) +#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458) +#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460) +#define OMAP4430_CM_D2D_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500) +#define OMAP4430_CM_D2D_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504) +#define OMAP4430_CM_D2D_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508) +#define OMAP4430_CM_D2D_SAD2D_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520) +#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528) +#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530) +#define OMAP4430_CM_L4CFG_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600) +#define OMAP4430_CM_L4CFG_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608) +#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620) +#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628) +#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630) +#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638) +#define OMAP4430_CM_L3INSTR_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700) +#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720) +#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728) +#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740) + +/* CM2.IVAHD_CM2 register offsets */ +#define OMAP4430_CM_IVAHD_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000) +#define OMAP4430_CM_IVAHD_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004) +#define OMAP4430_CM_IVAHD_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008) +#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020) +#define OMAP4430_CM_IVAHD_SL2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028) + +/* CM2.CAM_CM2 register offsets */ +#define OMAP4430_CM_CAM_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000) +#define OMAP4430_CM_CAM_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004) +#define OMAP4430_CM_CAM_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008) +#define OMAP4430_CM_CAM_ISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020) +#define OMAP4430_CM_CAM_FDIF_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028) + +/* CM2.DSS_CM2 register offsets */ +#define OMAP4430_CM_DSS_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000) +#define OMAP4430_CM_DSS_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004) +#define OMAP4430_CM_DSS_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008) +#define OMAP4430_CM_DSS_DSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020) +#define OMAP4430_CM_DSS_DEISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028) + +/* CM2.GFX_CM2 register offsets */ +#define OMAP4430_CM_GFX_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000) +#define OMAP4430_CM_GFX_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004) +#define OMAP4430_CM_GFX_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008) +#define OMAP4430_CM_GFX_GFX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020) + +/* CM2.L3INIT_CM2 register offsets */ +#define OMAP4430_CM_L3INIT_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000) +#define OMAP4430_CM_L3INIT_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004) +#define OMAP4430_CM_L3INIT_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008) +#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028) +#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030) +#define OMAP4430_CM_L3INIT_HSI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038) +#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040) +#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058) +#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060) +#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068) +#define OMAP4430_CM_L3INIT_P1500_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078) +#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080) +#define OMAP4430_CM_L3INIT_SATA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088) +#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090) +#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098) +#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8) +#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0) +#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8) +#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0) +#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0) + +/* CM2.L4PER_CM2 register offsets */ +#define OMAP4430_CM_L4PER_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000) +#define OMAP4430_CM_L4PER_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008) +#define OMAP4430_CM_L4PER_ADC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020) +#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028) +#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030) +#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038) +#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040) +#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048) +#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050) +#define OMAP4430_CM_L4PER_ELM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058) +#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060) +#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068) +#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070) +#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078) +#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080) +#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088) +#define OMAP4430_CM_L4PER_HECC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090) +#define OMAP4430_CM_L4PER_HECC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098) +#define OMAP4430_CM_L4PER_I2C1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0) +#define OMAP4430_CM_L4PER_I2C2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8) +#define OMAP4430_CM_L4PER_I2C3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0) +#define OMAP4430_CM_L4PER_I2C4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8) +#define OMAP4430_CM_L4PER_L4PER_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0) +#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0) +#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8) +#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0) +#define OMAP4430_CM_L4PER_MGATE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8) +#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0) +#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8) +#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100) +#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108) +#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120) +#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128) +#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130) +#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138) +#define OMAP4430_CM_L4PER_UART1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140) +#define OMAP4430_CM_L4PER_UART2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148) +#define OMAP4430_CM_L4PER_UART3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150) +#define OMAP4430_CM_L4PER_UART4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158) +#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160) +#define OMAP4430_CM_L4PER_I2C5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168) +#define OMAP4430_CM_L4SEC_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180) +#define OMAP4430_CM_L4SEC_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184) +#define OMAP4430_CM_L4SEC_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188) +#define OMAP4430_CM_L4SEC_AES1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0) +#define OMAP4430_CM_L4SEC_AES2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8) +#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0) +#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8) +#define OMAP4430_CM_L4SEC_RNG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0) +#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8) +#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8) + +/* CM2.CEFUSE_CM2 register offsets */ +#define OMAP4430_CM_CEFUSE_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000) +#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020) + +/* CM2.RESTORE_CM2 register offsets */ +#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000) +#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004) +#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008) +#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c) +#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010) +#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014) +#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018) +#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c) +#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020) +#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024) +#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028) +#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c) +#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030) +#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034) +#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038) +#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c) +#define OMAP4430_CM_SDMA_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040) +#endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 733d3dcff98b..18ad93160abb 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -27,6 +27,8 @@ #include <mach/gpio.h> #include <plat/mmc.h> +#include "mux.h" + #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) static struct resource cam_resources[] = { @@ -595,27 +597,40 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, if (cpu_is_omap34xx()) { if (controller_nr == 0) { - omap_cfg_reg(N28_3430_MMC1_CLK); - omap_cfg_reg(M27_3430_MMC1_CMD); - omap_cfg_reg(N27_3430_MMC1_DAT0); + omap_mux_init_signal("sdmmc1_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat0", + OMAP_PIN_INPUT_PULLUP); if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(N26_3430_MMC1_DAT1); - omap_cfg_reg(N25_3430_MMC1_DAT2); - omap_cfg_reg(P28_3430_MMC1_DAT3); + omap_mux_init_signal("sdmmc1_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(P27_3430_MMC1_DAT4); - omap_cfg_reg(P26_3430_MMC1_DAT5); - omap_cfg_reg(R27_3430_MMC1_DAT6); - omap_cfg_reg(R25_3430_MMC1_DAT7); + omap_mux_init_signal("sdmmc1_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat7", + OMAP_PIN_INPUT_PULLUP); } } if (controller_nr == 1) { /* MMC2 */ - omap_cfg_reg(AE2_3430_MMC2_CLK); - omap_cfg_reg(AG5_3430_MMC2_CMD); - omap_cfg_reg(AH5_3430_MMC2_DAT0); + omap_mux_init_signal("sdmmc2_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat0", + OMAP_PIN_INPUT_PULLUP); /* * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed @@ -623,15 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, */ if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AH4_3430_MMC2_DAT1); - omap_cfg_reg(AG4_3430_MMC2_DAT2); - omap_cfg_reg(AF4_3430_MMC2_DAT3); + omap_mux_init_signal("sdmmc2_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AE4_3430_MMC2_DAT4); - omap_cfg_reg(AH3_3430_MMC2_DAT5); - omap_cfg_reg(AF3_3430_MMC2_DAT6); - omap_cfg_reg(AE3_3430_MMC2_DAT7); + omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", + OMAP_PIN_INPUT_PULLUP); } } diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c new file mode 100644 index 000000000000..f6055b493294 --- /dev/null +++ b/arch/arm/mach-omap2/dpll.c @@ -0,0 +1,538 @@ +/* + * OMAP3/4 - specific DPLL control functions + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Written by Paul Walmsley + * Testing and integration fixes by Jouni Högander + * + * Parts of this code are based on code written by + * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/limits.h> +#include <linux/bitops.h> + +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <asm/div64.h> +#include <asm/clkdev.h> + +#include "clock.h" +#include "prm.h" +#include "prm-regbits-34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" + +/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ +#define DPLL_AUTOIDLE_DISABLE 0x0 +#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 + +#define MAX_DPLL_WAIT_TRIES 1000000 + + +/** + * omap3_dpll_recalc - recalculate DPLL rate + * @clk: DPLL struct clk + * + * Recalculate and propagate the DPLL rate. + */ +unsigned long omap3_dpll_recalc(struct clk *clk) +{ + return omap2_get_dpll_rate(clk); +} + +/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ +static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits) +{ + const struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + v = __raw_readl(dd->control_reg); + v &= ~dd->enable_mask; + v |= clken_bits << __ffs(dd->enable_mask); + __raw_writel(v, dd->control_reg); +} + +/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ +static int _omap3_wait_dpll_status(struct clk *clk, u8 state) +{ + const struct dpll_data *dd; + int i = 0; + int ret = -EINVAL; + + dd = clk->dpll_data; + + state <<= __ffs(dd->idlest_mask); + + while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) && + i < MAX_DPLL_WAIT_TRIES) { + i++; + udelay(1); + } + + if (i == MAX_DPLL_WAIT_TRIES) { + printk(KERN_ERR "clock: %s failed transition to '%s'\n", + clk->name, (state) ? "locked" : "bypassed"); + } else { + pr_debug("clock: %s transition to '%s' in %d loops\n", + clk->name, (state) ? "locked" : "bypassed", i); + + ret = 0; + } + + return ret; +} + +/* From 3430 TRM ES2 4.7.6.2 */ +static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) +{ + unsigned long fint; + u16 f = 0; + + fint = clk->dpll_data->clk_ref->rate / n; + + pr_debug("clock: fint is %lu\n", fint); + + if (fint >= 750000 && fint <= 1000000) + f = 0x3; + else if (fint > 1000000 && fint <= 1250000) + f = 0x4; + else if (fint > 1250000 && fint <= 1500000) + f = 0x5; + else if (fint > 1500000 && fint <= 1750000) + f = 0x6; + else if (fint > 1750000 && fint <= 2100000) + f = 0x7; + else if (fint > 7500000 && fint <= 10000000) + f = 0xB; + else if (fint > 10000000 && fint <= 12500000) + f = 0xC; + else if (fint > 12500000 && fint <= 15000000) + f = 0xD; + else if (fint > 15000000 && fint <= 17500000) + f = 0xE; + else if (fint > 17500000 && fint <= 21000000) + f = 0xF; + else + pr_debug("clock: unknown freqsel setting for %d\n", n); + + return f; +} + +/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ + +/* + * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report + * readiness before returning. Will save and restore the DPLL's + * autoidle state across the enable, per the CDP code. If the DPLL + * locked successfully, return 0; if the DPLL did not lock in the time + * allotted, or DPLL3 was passed in, return -EINVAL. + */ +static int _omap3_noncore_dpll_lock(struct clk *clk) +{ + u8 ai; + int r; + + pr_debug("clock: locking DPLL %s\n", clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + omap3_dpll_deny_idle(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOCKED); + + r = _omap3_wait_dpll_status(clk, 1); + + if (ai) + omap3_dpll_allow_idle(clk); + + return r; +} + +/* + * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power bypass mode. In + * bypass mode, the DPLL's rate is set equal to its parent clock's + * rate. Waits for the DPLL to report readiness before returning. + * Will save and restore the DPLL's autoidle state across the enable, + * per the CDP code. If the DPLL entered bypass mode successfully, + * return 0; if the DPLL did not enter bypass in the time allotted, or + * DPLL3 was passed in, or the DPLL does not support low-power bypass, + * return -EINVAL. + */ +static int _omap3_noncore_dpll_bypass(struct clk *clk) +{ + int r; + u8 ai; + + if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) + return -EINVAL; + + pr_debug("clock: configuring DPLL %s for low-power bypass\n", + clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); + + r = _omap3_wait_dpll_status(clk, 0); + + if (ai) + omap3_dpll_allow_idle(clk); + else + omap3_dpll_deny_idle(clk); + + return r; +} + +/* + * _omap3_noncore_dpll_stop - instruct a DPLL to stop + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power stop. Will save and + * restore the DPLL's autoidle state across the stop, per the CDP + * code. If DPLL3 was passed in, or the DPLL does not support + * low-power stop, return -EINVAL; otherwise, return 0. + */ +static int _omap3_noncore_dpll_stop(struct clk *clk) +{ + u8 ai; + + if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) + return -EINVAL; + + pr_debug("clock: stopping DPLL %s\n", clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); + + if (ai) + omap3_dpll_allow_idle(clk); + else + omap3_dpll_deny_idle(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. + * The choice of modes depends on the DPLL's programmed rate: if it is + * the same as the DPLL's parent clock, it will enter bypass; + * otherwise, it will enter lock. This code will wait for the DPLL to + * indicate readiness before returning, unless the DPLL takes too long + * to enter the target state. Intended to be used as the struct clk's + * enable function. If DPLL3 was passed in, or the DPLL does not + * support low-power stop, or if the DPLL took too long to enter + * bypass or lock, return -EINVAL; otherwise, return 0. + */ +int omap3_noncore_dpll_enable(struct clk *clk) +{ + int r; + struct dpll_data *dd; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (clk->rate == dd->clk_bypass->rate) { + WARN_ON(clk->parent != dd->clk_bypass); + r = _omap3_noncore_dpll_bypass(clk); + } else { + WARN_ON(clk->parent != dd->clk_ref); + r = _omap3_noncore_dpll_lock(clk); + } + /* + *FIXME: this is dubious - if clk->rate has changed, what about + * propagating? + */ + if (!r) + clk->rate = omap2_get_dpll_rate(clk); + + return r; +} + +/** + * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power stop. This function is + * intended for use in struct clkops. No return value. + */ +void omap3_noncore_dpll_disable(struct clk *clk) +{ + _omap3_noncore_dpll_stop(clk); +} + + +/* Non-CORE DPLL rate set code */ + +/* + * omap3_noncore_dpll_program - set non-core DPLL M,N values directly + * @clk: struct clk * of DPLL to set + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * @freqsel: FREQSEL value to set + * + * Program the DPLL with the supplied M, N values, and wait for the DPLL to + * lock.. Returns -EINVAL upon error, or 0 upon success. + */ +int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) +{ + struct dpll_data *dd = clk->dpll_data; + u32 v; + + /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ + _omap3_noncore_dpll_bypass(clk); + + /* Set jitter correction */ + if (!cpu_is_omap44xx()) { + v = __raw_readl(dd->control_reg); + v &= ~dd->freqsel_mask; + v |= freqsel << __ffs(dd->freqsel_mask); + __raw_writel(v, dd->control_reg); + } + + /* Set DPLL multiplier, divider */ + v = __raw_readl(dd->mult_div1_reg); + v &= ~(dd->mult_mask | dd->div1_mask); + v |= m << __ffs(dd->mult_mask); + v |= (n - 1) << __ffs(dd->div1_mask); + __raw_writel(v, dd->mult_div1_reg); + + /* We let the clock framework set the other output dividers later */ + + /* REVISIT: Set ramp-up delay? */ + + _omap3_noncore_dpll_lock(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_set_rate - set non-core DPLL rate + * @clk: struct clk * of DPLL to set + * @rate: rounded target rate + * + * Set the DPLL CLKOUT to the target rate. If the DPLL can enter + * low-power bypass, and the target rate is the bypass source clock + * rate, then configure the DPLL for bypass. Otherwise, round the + * target rate if it hasn't been done already, then program and lock + * the DPLL. Returns -EINVAL upon error, or 0 upon success. + */ +int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *new_parent = NULL; + u16 freqsel = 0; + struct dpll_data *dd; + int ret; + + if (!clk || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (rate == omap2_get_dpll_rate(clk)) + return 0; + + /* + * Ensure both the bypass and ref clocks are enabled prior to + * doing anything; we need the bypass clock running to reprogram + * the DPLL. + */ + omap2_clk_enable(dd->clk_bypass); + omap2_clk_enable(dd->clk_ref); + + if (dd->clk_bypass->rate == rate && + (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); + + ret = _omap3_noncore_dpll_bypass(clk); + if (!ret) + new_parent = dd->clk_bypass; + } else { + if (dd->last_rounded_rate != rate) + omap2_dpll_round_rate(clk, rate); + + if (dd->last_rounded_rate == 0) + return -EINVAL; + + /* No freqsel on OMAP4 */ + if (!cpu_is_omap44xx()) { + freqsel = _omap3_dpll_compute_freqsel(clk, + dd->last_rounded_n); + if (!freqsel) + WARN_ON(1); + } + + pr_debug("clock: %s: set rate: locking rate to %lu.\n", + clk->name, rate); + + ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, + dd->last_rounded_n, freqsel); + if (!ret) + new_parent = dd->clk_ref; + } + if (!ret) { + /* + * Switch the parent clock in the heirarchy, and make sure + * that the new parent's usecount is correct. Note: we + * enable the new parent before disabling the old to avoid + * any unnecessary hardware disable->enable transitions. + */ + if (clk->usecount) { + omap2_clk_enable(new_parent); + omap2_clk_disable(clk->parent); + } + clk_reparent(clk, new_parent); + clk->rate = rate; + } + omap2_clk_disable(dd->clk_ref); + omap2_clk_disable(dd->clk_bypass); + + return 0; +} + +/* DPLL autoidle read/set code */ + +/** + * omap3_dpll_autoidle_read - read a DPLL's autoidle bits + * @clk: struct clk * of the DPLL to read + * + * Return the DPLL's autoidle bits, shifted down to bit 0. Returns + * -EINVAL if passed a null pointer or if the struct clk does not + * appear to refer to a DPLL. + */ +u32 omap3_dpll_autoidle_read(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return -EINVAL; + + dd = clk->dpll_data; + + v = __raw_readl(dd->autoidle_reg); + v &= dd->autoidle_mask; + v >>= __ffs(dd->autoidle_mask); + + return v; +} + +/** + * omap3_dpll_allow_idle - enable DPLL autoidle bits + * @clk: struct clk * of the DPLL to operate on + * + * Enable DPLL automatic idle control. This automatic idle mode + * switching takes effect only when the DPLL is locked, at least on + * OMAP3430. The DPLL will enter low-power stop when its downstream + * clocks are gated. No return value. + */ +void omap3_dpll_allow_idle(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return; + + dd = clk->dpll_data; + + /* + * REVISIT: CORE DPLL can optionally enter low-power bypass + * by writing 0x5 instead of 0x1. Add some mechanism to + * optionally enter this mode. + */ + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); +} + +/** + * omap3_dpll_deny_idle - prevent DPLL from automatically idling + * @clk: struct clk * of the DPLL to operate on + * + * Disable DPLL automatic idle control. No return value. + */ +void omap3_dpll_deny_idle(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return; + + dd = clk->dpll_data; + + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); + +} + +/* Clock control for DPLL outputs */ + +/** + * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate + * @clk: DPLL output struct clk + * + * Using parent clock DPLL data, look up DPLL state. If locked, set our + * rate to the dpll_clk * 2; otherwise, just use dpll_clk. + */ +unsigned long omap3_clkoutx2_recalc(struct clk *clk) +{ + const struct dpll_data *dd; + unsigned long rate; + u32 v; + struct clk *pclk; + + /* Walk up the parents of clk, looking for a DPLL */ + pclk = clk->parent; + while (pclk && !pclk->dpll_data) + pclk = pclk->parent; + + /* clk does not have a DPLL as a parent? */ + WARN_ON(!pclk); + + dd = pclk->dpll_data; + + WARN_ON(!dd->enable_mask); + + v = __raw_readl(dd->control_reg) & dd->enable_mask; + v >>= __ffs(dd->enable_mask); + if (v != OMAP3XXX_EN_DPLL_LOCKED) + rate = clk->parent->rate; + else + rate = clk->parent->rate * 2; + return rate; +} diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 6083e21b3be6..877c6f5807b7 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -33,17 +33,19 @@ static struct resource gpmc_smc91x_resources[] = { }; static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, }; static struct platform_device gpmc_smc91x_device = { .name = "smc91x", .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, .dev = { .platform_data = &gpmc_smc91x_info, }, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, }; /* diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e86f5ca180ea..bd8cb5974726 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -517,7 +517,7 @@ void __init gpmc_init(void) ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; } else if (cpu_is_omap44xx()) { - ck = "gpmc_fck"; + ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; } diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c new file mode 100644 index 000000000000..789ca8c02f0c --- /dev/null +++ b/arch/arm/mach-omap2/i2c.c @@ -0,0 +1,56 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/cpu.h> +#include <plat/i2c.h> +#include <plat/mux.h> + +#include "mux.h" + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap24xx()) { + const int omap24xx_pins[][2] = { + { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, + { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, + }; + int scl, sda; + + scl = omap24xx_pins[bus_id - 1][0]; + sda = omap24xx_pins[bus_id - 1][1]; + omap_cfg_reg(sda); + omap_cfg_reg(scl); + } + + /* First I2C bus is not muxable */ + if (cpu_is_omap34xx() && bus_id > 1) { + char mux_name[sizeof("i2c2_scl.i2c2_scl")]; + + sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f48a4b2654dd..a091b53657b9 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -246,6 +246,31 @@ void __init omap3_check_revision(void) } } +void __init omap4_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + char *rev_name = "ES1.0"; + + /* + * The IC rev detection is done with hawkeye and rev. + * Note that rev does not map directly to defined processor + * revision numbers as ES1.0 uses value 0. + */ + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + + if ((hawkeye == 0xb852) && (rev == 0x0)) { + omap_revision = OMAP4430_REV_ES1_0; + pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); + return; + } + + pr_err("Unknown OMAP4 CPU id\n"); +} + #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ printk(#feat" "); @@ -277,10 +302,10 @@ void __init omap3_cpuinfo(void) } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ strcpy(cpu_name, "OMAP3430/3530"); - } else if (omap3_has_sgx()) { + } else if (omap3_has_iva()) { omap_revision = OMAP3525_REV(rev); strcpy(cpu_name, "OMAP3525"); - } else if (omap3_has_iva()) { + } else if (omap3_has_sgx()) { omap_revision = OMAP3515_REV(rev); strcpy(cpu_name, "OMAP3515"); } else { @@ -336,7 +361,7 @@ void __init omap2_check_revision(void) omap3_check_features(); omap3_cpuinfo(); } else if (cpu_is_omap44xx()) { - printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + omap4_check_revision(); return; } else { pr_err("OMAP revision unknown, please fix!\n"); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 59d28b2fd8c5..a8749e8017b9 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -22,19 +22,20 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/omapfb.h> #include <asm/tlb.h> #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/omapfb.h> #include <plat/sram.h> #include <plat/sdrc.h> #include <plat/gpmc.h> #include <plat/serial.h> +#include <plat/mux.h> +#include <plat/vram.h> -#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" #include <plat/omap-pm.h> @@ -43,7 +44,6 @@ #include <plat/clockdomain.h> #include "clockdomains.h" -#endif #include <plat/omap_hwmod.h> #include "omap_hwmod_2420.h" #include "omap_hwmod_2430.h" @@ -264,6 +264,7 @@ void __init omap2_map_common_io(void) omap2_check_revision(); omap_sram_init(); omapfb_reserve_sdram(); + omap_vram_reserve_sdram(); } /* @@ -319,8 +320,8 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); - omap2_clk_init(); #endif + omap2_clk_init(); omap_serial_early_init(); #ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c18a94eca641..e071b3fd1878 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -27,19 +27,52 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/ctype.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> #include <asm/system.h> #include <plat/control.h> #include <plat/mux.h> -#ifdef CONFIG_OMAP_MUX +#include "mux.h" + +#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ +#define OMAP_MUX_BASE_SZ 0x5ca + +struct omap_mux_entry { + struct omap_mux mux; + struct list_head node; +}; + +static unsigned long mux_phys; +static void __iomem *mux_base; + +static inline u16 omap_mux_read(u16 reg) +{ + if (cpu_is_omap24xx()) + return __raw_readb(mux_base + reg); + else + return __raw_readw(mux_base + reg); +} + +static inline void omap_mux_write(u16 val, u16 reg) +{ + if (cpu_is_omap24xx()) + __raw_writeb(val, mux_base + reg); + else + __raw_writew(val, mux_base + reg); +} + +#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX) static struct omap_mux_cfg arch_mux_cfg; /* NOTE: See mux.h for the enumeration */ -#ifdef CONFIG_ARCH_OMAP24XX static struct pin_config __initdata_or_module omap24xx_pins[] = { /* * description mux mux pull pull debug @@ -249,342 +282,14 @@ MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1) #define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins) -#else -#define omap24xx_pins NULL -#define OMAP24XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP24XX */ - -#ifdef CONFIG_ARCH_OMAP34XX -static struct pin_config __initdata_or_module omap34xx_pins[] = { -/* - * Name, reg-offset, - * mux-mode | [active-mode | off-mode] - */ - -/* 34xx I2C */ -MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 3*/ -MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ -MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) - - -/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix. - * (Always specify PIN_INPUT, except for names suffixed by "_OUT".) - * No internal pullup/pulldown without "_UP" or "_DOWN" suffix. - */ -MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) - -/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ -MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) - -/* MMC1 */ -MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC2 */ -MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC3 */ -MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) - -/* SYS_NIRQ T2 INT1 */ -MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0, - OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP | - OMAP34XX_MUX_MODE0) -/* EHCI GPIO's on OMAP3EVM (Rev >= E) */ -MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -}; - -#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) - -#else -#define omap34xx_pins NULL -#define OMAP34XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP34XX */ - #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) { u16 orig; u8 warn = 0, debug = 0; - if (cpu_is_omap24xx()) - orig = omap_ctrl_readb(cfg->mux_reg); - else - orig = omap_ctrl_readw(cfg->mux_reg); + orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET); #ifdef CONFIG_OMAP_MUX_DEBUG debug = cfg->debug; @@ -600,7 +305,6 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r #define omap2_cfg_debug(x, y) do {} while (0) #endif -#ifdef CONFIG_ARCH_OMAP24XX static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) { static DEFINE_SPINLOCK(mux_spin_lock); @@ -614,47 +318,692 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) if (cfg->pu_pd_val) reg |= OMAP2_PULL_UP; omap2_cfg_debug(cfg, reg); - omap_ctrl_writeb(reg, cfg->mux_reg); + omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); spin_unlock_irqrestore(&mux_spin_lock, flags); return 0; } + +int __init omap2_mux_init(void) +{ + u32 mux_pbase; + + if (cpu_is_omap2420()) + mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else if (cpu_is_omap2430()) + mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else + return -ENODEV; + + mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + + if (cpu_is_omap24xx()) { + arch_mux_cfg.pins = omap24xx_pins; + arch_mux_cfg.size = OMAP24XX_PINS_SZ; + arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; + + return omap_mux_register(&arch_mux_cfg); + } + + return 0; +} + #else -#define omap24xx_cfg_reg NULL -#endif +int __init omap2_mux_init(void) +{ + return 0; +} +#endif /* CONFIG_OMAP_MUX */ + +/*----------------------------------------------------------------------------*/ #ifdef CONFIG_ARCH_OMAP34XX -static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) +static LIST_HEAD(muxmodes); +static DEFINE_MUTEX(muxmode_mutex); + +#ifdef CONFIG_OMAP_MUX + +static char *omap_mux_options; + +int __init omap_mux_init_gpio(int gpio, int val) { - static DEFINE_SPINLOCK(mux_spin_lock); - unsigned long flags; - u16 reg = 0; + struct omap_mux_entry *e; + int found = 0; + + if (!gpio) + return -EINVAL; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (gpio == m->gpio) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); + mux_mode |= OMAP_MUX_MODE4; + printk(KERN_DEBUG "mux: Setting signal " + "%s.gpio%i 0x%04x -> 0x%04x\n", + m->muxnames[0], gpio, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } - spin_lock_irqsave(&mux_spin_lock, flags); - reg |= cfg->mux_val; - omap2_cfg_debug(cfg, reg); - omap_ctrl_writew(reg, cfg->mux_reg); - spin_unlock_irqrestore(&mux_spin_lock, flags); + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + + return -ENODEV; +} + +int __init omap_mux_init_signal(char *muxname, int val) +{ + struct omap_mux_entry *e; + char *m0_name = NULL, *mode_name = NULL; + int found = 0; + + mode_name = strchr(muxname, '.'); + if (mode_name) { + *mode_name = '\0'; + mode_name++; + m0_name = muxname; + } else { + mode_name = muxname; + } + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char *m0_entry = m->muxnames[0]; + int i; + + if (m0_name && strcmp(m0_name, m0_entry)) + continue; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + char *mode_cur = m->muxnames[i]; + + if (!mode_cur) + continue; + + if (!strcmp(mode_name, mode_cur)) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val | i; + printk(KERN_DEBUG "mux: Setting signal " + "%s.%s 0x%04x -> 0x%04x\n", + m0_entry, muxname, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } + } + + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n", + found, muxname); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set signal %s\n", muxname); + + return -ENODEV; +} + +#ifdef CONFIG_DEBUG_FS + +#define OMAP_MUX_MAX_NR_FLAGS 10 +#define OMAP_MUX_TEST_FLAG(val, mask) \ + if (((val) & (mask)) == (mask)) { \ + i++; \ + flags[i] = #mask; \ + } + +/* REVISIT: Add checking for non-optimal mux settings */ +static inline void omap_mux_decode(struct seq_file *s, u16 val) +{ + char *flags[OMAP_MUX_MAX_NR_FLAGS]; + char mode[14]; + int i = -1; + + sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); + i++; + flags[i] = mode; + + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE); + if (val & OMAP_OFF_EN) { + if (!(val & OMAP_OFFOUT_EN)) { + if (!(val & OMAP_OFF_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLUP); + } + } else { + if (!(val & OMAP_OFFOUT_VAL)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_LOW); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_HIGH); + } + } + } + + if (val & OMAP_INPUT_EN) { + if (val & OMAP_PULL_ENA) { + if (!(val & OMAP_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP); + } + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT); + } + } else { + i++; + flags[i] = "OMAP_PIN_OUTPUT"; + } + + do { + seq_printf(s, "%s", flags[i]); + if (i > 0) + seq_printf(s, " | "); + } while (i-- > 0); +} + +#define OMAP_MUX_DEFNAME_LEN 16 + +static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) +{ + struct omap_mux_entry *e; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char m0_def[OMAP_MUX_DEFNAME_LEN]; + char *m0_name = m->muxnames[0]; + u16 val; + int i, mode; + + if (!m0_name) + continue; + + for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { + if (m0_name[i] == '\0') { + m0_def[i] = m0_name[i]; + break; + } + m0_def[i] = toupper(m0_name[i]); + } + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "OMAP%i_MUX(%s, ", + cpu_is_omap34xx() ? 3 : 0, m0_def); + omap_mux_decode(s, val); + seq_printf(s, "),\n"); + } + + return 0; +} + +static int omap_mux_dbg_board_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_board_show, &inode->i_private); +} + +static const struct file_operations omap_mux_dbg_board_fops = { + .open = omap_mux_dbg_board_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused) +{ + struct omap_mux *m = s->private; + const char *none = "NA"; + u16 val; + int mode; + + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n", + m->muxnames[0], m->muxnames[mode], + mux_phys + m->reg_offset, m->reg_offset, val, + m->balls[0] ? m->balls[0] : none, + m->balls[1] ? m->balls[1] : none); + seq_printf(s, "mode: "); + omap_mux_decode(s, val); + seq_printf(s, "\n"); + seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n", + m->muxnames[0] ? m->muxnames[0] : none, + m->muxnames[1] ? m->muxnames[1] : none, + m->muxnames[2] ? m->muxnames[2] : none, + m->muxnames[3] ? m->muxnames[3] : none, + m->muxnames[4] ? m->muxnames[4] : none, + m->muxnames[5] ? m->muxnames[5] : none, + m->muxnames[6] ? m->muxnames[6] : none, + m->muxnames[7] ? m->muxnames[7] : none); return 0; } + +#define OMAP_MUX_MAX_ARG_CHAR 7 + +static ssize_t omap_mux_dbg_signal_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + char buf[OMAP_MUX_MAX_ARG_CHAR]; + struct seq_file *seqf; + struct omap_mux *m; + unsigned long val; + int buf_size, ret; + + if (count > OMAP_MUX_MAX_ARG_CHAR) + return -EINVAL; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + ret = strict_strtoul(buf, 0x10, &val); + if (ret < 0) + return ret; + + if (val > 0xffff) + return -EINVAL; + + seqf = file->private_data; + m = seqf->private; + + omap_mux_write((u16)val, m->reg_offset); + *ppos += count; + + return count; +} + +static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_signal_show, inode->i_private); +} + +static const struct file_operations omap_mux_dbg_signal_fops = { + .open = omap_mux_dbg_signal_open, + .read = seq_read, + .write = omap_mux_dbg_signal_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *mux_dbg_dir; + +static void __init omap_mux_dbg_init(void) +{ + struct omap_mux_entry *e; + + mux_dbg_dir = debugfs_create_dir("omap_mux", NULL); + if (!mux_dbg_dir) + return; + + (void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir, + NULL, &omap_mux_dbg_board_fops); + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + + (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, + m, &omap_mux_dbg_signal_fops); + } +} + #else -#define omap34xx_cfg_reg NULL +static inline void omap_mux_dbg_init(void) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void __init omap_mux_free_names(struct omap_mux *m) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) + kfree(m->muxnames[i]); + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) + kfree(m->balls[i]); #endif -int __init omap2_mux_init(void) +} + +/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */ +static int __init omap_mux_late_init(void) { - if (cpu_is_omap24xx()) { - arch_mux_cfg.pins = omap24xx_pins; - arch_mux_cfg.size = OMAP24XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; - } else if (cpu_is_omap34xx()) { - arch_mux_cfg.pins = omap34xx_pins; - arch_mux_cfg.size = OMAP34XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap34xx_cfg_reg; + struct omap_mux_entry *e, *tmp; + + list_for_each_entry_safe(e, tmp, &muxmodes, node) { + struct omap_mux *m = &e->mux; + u16 mode = omap_mux_read(m->reg_offset); + + if (OMAP_MODE_GPIO(mode)) + continue; + +#ifndef CONFIG_DEBUG_FS + mutex_lock(&muxmode_mutex); + list_del(&e->node); + mutex_unlock(&muxmode_mutex); + omap_mux_free_names(m); + kfree(m); +#endif + + } + + omap_mux_dbg_init(); + + return 0; +} +late_initcall(omap_mux_late_init); + +static void __init omap_mux_package_fixup(struct omap_mux *p, + struct omap_mux *superset) +{ + while (p->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == p->reg_offset) { + *s = *p; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown entry offset 0x%x\n", + p->reg_offset); + p++; + } +} + +#ifdef CONFIG_DEBUG_FS + +static void __init omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ + while (b->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == b->reg_offset) { + s->balls[0] = b->balls[0]; + s->balls[1] = b->balls[1]; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown ball offset 0x%x\n", + b->reg_offset); + b++; + } +} + +#else /* CONFIG_DEBUG_FS */ + +static inline void omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ +} + +#endif /* CONFIG_DEBUG_FS */ + +static int __init omap_mux_setup(char *options) +{ + if (!options) + return 0; + + omap_mux_options = options; + + return 1; +} +__setup("omap_mux=", omap_mux_setup); + +/* + * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234 + * cmdline options only override the bootloader values. + * During development, please enable CONFIG_DEBUG_FS, and use the + * signal specific entries under debugfs. + */ +static void __init omap_mux_set_cmdline_signals(void) +{ + char *options, *next_opt, *token; + + if (!omap_mux_options) + return; + + options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + if (!options) + return; + + strcpy(options, omap_mux_options); + next_opt = options; + + while ((token = strsep(&next_opt, ",")) != NULL) { + char *keyval, *name; + unsigned long val; + + keyval = token; + name = strsep(&keyval, "="); + if (name) { + int res; + + res = strict_strtoul(keyval, 0x10, &val); + if (res < 0) + continue; + + omap_mux_init_signal(name, (u16)val); + } + } + + kfree(options); +} + +static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux) +{ + while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { + omap_mux_write(board_mux->value, board_mux->reg_offset); + board_mux++; + } +} + +static int __init omap_mux_copy_names(struct omap_mux *src, + struct omap_mux *dst) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + if (src->muxnames[i]) { + dst->muxnames[i] = + kmalloc(strlen(src->muxnames[i]) + 1, + GFP_KERNEL); + if (!dst->muxnames[i]) + goto free; + strcpy(dst->muxnames[i], src->muxnames[i]); + } + } + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { + if (src->balls[i]) { + dst->balls[i] = + kmalloc(strlen(src->balls[i]) + 1, + GFP_KERNEL); + if (!dst->balls[i]) + goto free; + strcpy(dst->balls[i], src->balls[i]); + } + } +#endif + + return 0; + +free: + omap_mux_free_names(dst); + return -ENOMEM; + +} + +#endif /* CONFIG_OMAP_MUX */ + +static u16 omap_mux_get_by_gpio(int gpio) +{ + struct omap_mux_entry *e; + u16 offset = OMAP_MUX_TERMINATOR; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (m->gpio == gpio) { + offset = m->reg_offset; + break; + } + } + + return offset; +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +u16 omap_mux_get_gpio(int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not get gpio%i\n", gpio); + return offset; + } + + return omap_mux_read(offset); +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +void omap_mux_set_gpio(u16 val, int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + return; + } + + omap_mux_write(val, offset); +} + +static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src) +{ + struct omap_mux_entry *entry; + struct omap_mux *m; + + entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL); + if (!entry) + return NULL; + + m = &entry->mux; + memcpy(m, src, sizeof(struct omap_mux_entry)); + +#ifdef CONFIG_OMAP_MUX + if (omap_mux_copy_names(src, m)) { + kfree(entry); + return NULL; } +#endif + + mutex_lock(&muxmode_mutex); + list_add_tail(&entry->node, &muxmodes); + mutex_unlock(&muxmode_mutex); - return omap_mux_register(&arch_mux_cfg); + return m; } +/* + * Note if CONFIG_OMAP_MUX is not selected, we will only initialize + * the GPIO to mux offset mapping that is needed for dynamic muxing + * of GPIO pins for off-idle. + */ +static void __init omap_mux_init_list(struct omap_mux *superset) +{ + while (superset->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *entry; + +#ifndef CONFIG_OMAP_MUX + /* Skip pins that are not muxed as GPIO by bootloader */ + if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { + superset++; + continue; + } #endif + + entry = omap_mux_list_add(superset); + if (!entry) { + printk(KERN_ERR "mux: Could not add entry\n"); + return; + } + superset++; + } +} + +int __init omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls) +{ + if (mux_base) + return -EBUSY; + + mux_phys = mux_pbase; + mux_base = ioremap(mux_pbase, mux_size); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + +#ifdef CONFIG_OMAP_MUX + omap_mux_package_fixup(package_subset, superset); + omap_mux_package_init_balls(package_balls, superset); + omap_mux_set_cmdline_signals(); + omap_mux_set_board_signals(board_mux); +#endif + + omap_mux_init_list(superset); + + return 0; +} + +#endif /* CONFIG_ARCH_OMAP34XX */ + diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h new file mode 100644 index 000000000000..d8b4d5ad2278 --- /dev/null +++ b/arch/arm/mach-omap2/mux.h @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "mux34xx.h" + +#define OMAP_MUX_TERMINATOR 0xffff + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP_MUX_MODE0 0 +#define OMAP_MUX_MODE1 1 +#define OMAP_MUX_MODE2 2 +#define OMAP_MUX_MODE3 3 +#define OMAP_MUX_MODE4 4 +#define OMAP_MUX_MODE5 5 +#define OMAP_MUX_MODE6 6 +#define OMAP_MUX_MODE7 7 + +/* 24xx/34xx mux bit defines */ +#define OMAP_PULL_ENA (1 << 3) +#define OMAP_PULL_UP (1 << 4) +#define OMAP_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP_INPUT_EN (1 << 8) +#define OMAP_OFF_EN (1 << 9) +#define OMAP_OFFOUT_EN (1 << 10) +#define OMAP_OFFOUT_VAL (1 << 11) +#define OMAP_OFF_PULL_EN (1 << 12) +#define OMAP_OFF_PULL_UP (1 << 13) +#define OMAP_WAKEUP_EN (1 << 14) + +/* Active pin states */ +#define OMAP_PIN_OUTPUT 0 +#define OMAP_PIN_INPUT OMAP_INPUT_EN +#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \ + | OMAP_PULL_UP) +#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN) + +/* Off mode states */ +#define OMAP_PIN_OFF_NONE 0 +#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \ + | OMAP_OFFOUT_VAL) +#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN) +#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \ + | OMAP_OFF_PULL_UP) +#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) +#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN + +#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) + +/* Flags for omap_mux_init */ +#define OMAP_PACKAGE_MASK 0xffff +#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */ +#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */ + + +#define OMAP_MUX_NR_MODES 8 /* Available modes */ +#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */ + +/** + * struct omap_mux - data for omap mux register offset and it's value + * @reg_offset: mux register offset from the mux base + * @gpio: GPIO number + * @muxnames: available signal modes for a ball + */ +struct omap_mux { + u16 reg_offset; + u16 gpio; +#ifdef CONFIG_OMAP_MUX + char *muxnames[OMAP_MUX_NR_MODES]; +#ifdef CONFIG_DEBUG_FS + char *balls[OMAP_MUX_NR_SIDES]; +#endif +#endif +}; + +/** + * struct omap_ball - data for balls on omap package + * @reg_offset: mux register offset from the mux base + * @balls: available balls on the package + */ +struct omap_ball { + u16 reg_offset; + char *balls[OMAP_MUX_NR_SIDES]; +}; + +/** + * struct omap_board_mux - data for initializing mux registers + * @reg_offset: mux register offset from the mux base + * @mux_value: desired mux value to set + */ +struct omap_board_mux { + u16 reg_offset; + u16 value; +}; + +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX) + +/** + * omap_mux_init_gpio - initialize a signal based on the GPIO number + * @gpio: GPIO number + * @val: Options for the mux register value + */ +int omap_mux_init_gpio(int gpio, int val); + +/** + * omap_mux_init_signal - initialize a signal based on the signal name + * @muxname: Mux name in mode0_name.signal_name format + * @val: Options for the mux register value + */ +int omap_mux_init_signal(char *muxname, int val); + +#else + +static inline int omap_mux_init_gpio(int gpio, int val) +{ + return 0; +} +static inline int omap_mux_init_signal(char *muxname, int val) +{ + return 0; +} + +#endif + +/** + * omap_mux_get_gpio() - get mux register value based on GPIO number + * @gpio: GPIO number + * + */ +u16 omap_mux_get_gpio(int gpio); + +/** + * omap_mux_set_gpio() - set mux register value based on GPIO number + * @val: New mux register value + * @gpio: GPIO number + * + */ +void omap_mux_set_gpio(u16 val, int gpio); + +/** + * omap3_mux_init() - initialize mux system with board specific set + * @board_mux: Board specific mux table + * @flags: OMAP package type used for the board + */ +int omap3_mux_init(struct omap_board_mux *board_mux, int flags); + +/** + * omap_mux_init - private mux init function, do not call + */ +int omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c new file mode 100644 index 000000000000..68e0a595f9a1 --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.c @@ -0,0 +1,2099 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> + +#include "mux.h" + +#ifdef CONFIG_OMAP_MUX + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ + .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ +} + +#else + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ +} + +#endif + +#define _OMAP3_BALLENTRY(M0, bb, bt) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .balls = { bb, bt }, \ +} + +/* + * Superset of all mux modes for omap3 + */ +static struct omap_mux __initdata omap3_muxmodes[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, NULL, NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, NULL, NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", "hw_dbg9", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D6, 105, + "cam_d6", NULL, NULL, NULL, + "gpio_105", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D7, 106, + "cam_d7", NULL, NULL, NULL, + "gpio_106", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D8, 107, + "cam_d8", NULL, NULL, NULL, + "gpio_107", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D9, 108, + "cam_d9", NULL, NULL, NULL, + "gpio_108", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", "hw_dbg3", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", "hw_dbg2", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", "hw_dbg11", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", "hw_dbg10", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKA, 96, + "cam_xclka", NULL, NULL, NULL, + "gpio_96", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKB, 111, + "cam_xclkb", NULL, NULL, NULL, + "gpio_111", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX0, 112, + "csi2_dx0", NULL, NULL, NULL, + "gpio_112", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX1, 114, + "csi2_dx1", NULL, NULL, NULL, + "gpio_114", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY0, 113, + "csi2_dy0", NULL, NULL, NULL, + "gpio_113", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY1, 115, + "csi2_dy1", NULL, NULL, NULL, + "gpio_115", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_ACBIAS, 69, + "dss_acbias", NULL, NULL, NULL, + "gpio_69", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", NULL, "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", NULL, "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA10, 80, + "dss_data10", NULL, NULL, NULL, + "gpio_80", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA11, 81, + "dss_data11", NULL, NULL, NULL, + "gpio_81", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA12, 82, + "dss_data12", NULL, NULL, NULL, + "gpio_82", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA13, 83, + "dss_data13", NULL, NULL, NULL, + "gpio_83", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA14, 84, + "dss_data14", NULL, NULL, NULL, + "gpio_84", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA15, 85, + "dss_data15", NULL, NULL, NULL, + "gpio_85", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA16, 86, + "dss_data16", NULL, NULL, NULL, + "gpio_86", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA17, 87, + "dss_data17", NULL, NULL, NULL, + "gpio_87", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA18, 88, + "dss_data18", NULL, "mcspi3_clk", "dss_data0", + "gpio_88", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA19, 89, + "dss_data19", NULL, "mcspi3_simo", "dss_data1", + "gpio_89", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA20, 90, + "dss_data20", NULL, "mcspi3_somi", "dss_data2", + "gpio_90", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA21, 91, + "dss_data21", NULL, "mcspi3_cs0", "dss_data3", + "gpio_91", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA22, 92, + "dss_data22", NULL, "mcspi3_cs1", "dss_data4", + "gpio_92", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA23, 93, + "dss_data23", NULL, NULL, "dss_data5", + "gpio_93", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", NULL, NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", NULL, NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", NULL, "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", NULL, "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", "hw_dbg13", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", "hw_dbg12", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_VSYNC, 68, + "dss_vsync", NULL, NULL, NULL, + "gpio_68", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"), + _OMAP3_MUXENTRY(GPMC_A1, 34, + "gpmc_a1", NULL, NULL, NULL, + "gpio_34", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A10, 43, + "gpmc_a10", "sys_ndmareq3", NULL, NULL, + "gpio_43", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A2, 35, + "gpmc_a2", NULL, NULL, NULL, + "gpio_35", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A3, 36, + "gpmc_a3", NULL, NULL, NULL, + "gpio_36", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A4, 37, + "gpmc_a4", NULL, NULL, NULL, + "gpio_37", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A5, 38, + "gpmc_a5", NULL, NULL, NULL, + "gpio_38", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A6, 39, + "gpmc_a6", NULL, NULL, NULL, + "gpio_39", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A7, 40, + "gpmc_a7", NULL, NULL, NULL, + "gpio_40", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A8, 41, + "gpmc_a8", NULL, NULL, NULL, + "gpio_41", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A9, 42, + "gpmc_a9", "sys_ndmareq2", NULL, NULL, + "gpio_42", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_CLK, 59, + "gpmc_clk", NULL, NULL, NULL, + "gpio_59", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D10, 46, + "gpmc_d10", NULL, NULL, NULL, + "gpio_46", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D11, 47, + "gpmc_d11", NULL, NULL, NULL, + "gpio_47", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D12, 48, + "gpmc_d12", NULL, NULL, NULL, + "gpio_48", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D13, 49, + "gpmc_d13", NULL, NULL, NULL, + "gpio_49", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D14, 50, + "gpmc_d14", NULL, NULL, NULL, + "gpio_50", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D15, 51, + "gpmc_d15", NULL, NULL, NULL, + "gpio_51", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D8, 44, + "gpmc_d8", NULL, NULL, NULL, + "gpio_44", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D9, 45, + "gpmc_d9", NULL, NULL, NULL, + "gpio_45", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60, + "gpmc_nbe0_cle", NULL, NULL, NULL, + "gpio_60", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE1, 61, + "gpmc_nbe1", NULL, NULL, NULL, + "gpio_61", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS1, 52, + "gpmc_ncs1", NULL, NULL, NULL, + "gpio_52", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS2, 53, + "gpmc_ncs2", NULL, NULL, NULL, + "gpio_53", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS3, 54, + "gpmc_ncs3", "sys_ndmareq0", NULL, NULL, + "gpio_54", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS4, 55, + "gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt", + "gpio_55", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS5, 56, + "gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt", + "gpio_56", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS6, 57, + "gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt", + "gpio_57", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS7, 58, + "gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt", + "gpio_58", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NWP, 62, + "gpmc_nwp", NULL, NULL, NULL, + "gpio_62", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT1, 63, + "gpmc_wait1", NULL, NULL, NULL, + "gpio_63", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, NULL, NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", NULL, NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HDQ_SIO, 170, + "hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe", + "gpio_170", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_CLK, 120, + "hsusb0_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA4, 188, + "hsusb0_data4", NULL, NULL, NULL, + "gpio_188", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA5, 189, + "hsusb0_data5", NULL, NULL, NULL, + "gpio_189", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA6, 190, + "hsusb0_data6", NULL, NULL, NULL, + "gpio_190", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA7, 191, + "hsusb0_data7", NULL, NULL, NULL, + "gpio_191", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DIR, 122, + "hsusb0_dir", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_NXT, 124, + "hsusb0_nxt", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_STP, 121, + "hsusb0_stp", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SCL, 168, + "i2c2_scl", NULL, NULL, NULL, + "gpio_168", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SDA, 183, + "i2c2_sda", NULL, NULL, NULL, + "gpio_183", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SCL, 184, + "i2c3_scl", NULL, NULL, NULL, + "gpio_184", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SDA, 185, + "i2c3_sda", NULL, NULL, NULL, + "gpio_185", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SCL, 0, + "i2c4_scl", "sys_nvmode1", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SDA, 0, + "i2c4_sda", "sys_nvmode2", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU0, 11, + "jtag_emu0", NULL, NULL, NULL, + "gpio_11", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU1, 31, + "jtag_emu1", NULL, NULL, NULL, + "gpio_31", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", NULL, NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKX, 162, + "mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL, + "gpio_162", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DR, 159, + "mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL, + "gpio_159", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DX, 158, + "mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL, + "gpio_158", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", NULL, "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSX, 161, + "mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL, + "gpio_161", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_CLKX, 117, + "mcbsp2_clkx", NULL, NULL, NULL, + "gpio_117", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DR, 118, + "mcbsp2_dr", NULL, NULL, NULL, + "gpio_118", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DX, 119, + "mcbsp2_dx", NULL, NULL, NULL, + "gpio_119", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_FSX, 116, + "mcbsp2_fsx", NULL, NULL, NULL, + "gpio_116", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", NULL, NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", NULL, NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", NULL, NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", NULL, NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP_CLKS, 160, + "mcbsp_clks", NULL, "cam_shutter", NULL, + "gpio_160", "uart1_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CLK, 171, + "mcspi1_clk", "sdmmc2_dat4", NULL, NULL, + "gpio_171", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS0, 174, + "mcspi1_cs0", "sdmmc2_dat7", NULL, NULL, + "gpio_174", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", NULL, NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS2, 176, + "mcspi1_cs2", NULL, NULL, "sdmmc3_clk", + "gpio_176", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS3, 177, + "mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2", + "gpio_177", "mm2_txdat", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SIMO, 172, + "mcspi1_simo", "sdmmc2_dat5", NULL, NULL, + "gpio_172", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SOMI, 173, + "mcspi1_somi", "sdmmc2_dat6", NULL, NULL, + "gpio_173", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CLK, 178, + "mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7", + "gpio_178", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS0, 181, + "mcspi2_cs0", "gpt11_pwm_evt", + "hsusb2_tll_data6", "hsusb2_data6", + "gpio_181", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS1, 182, + "mcspi2_cs1", "gpt8_pwm_evt", + "hsusb2_tll_data3", "hsusb2_data3", + "gpio_182", "mm2_txen_n", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SIMO, 179, + "mcspi2_simo", "gpt9_pwm_evt", + "hsusb2_tll_data4", "hsusb2_data4", + "gpio_179", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SOMI, 180, + "mcspi2_somi", "gpt10_pwm_evt", + "hsusb2_tll_data5", "hsusb2_data5", + "gpio_180", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", NULL, NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", NULL, NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT4, 126, + "sdmmc1_dat4", NULL, "sim_io", NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT5, 127, + "sdmmc1_dat5", NULL, "sim_clk", NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT6, 128, + "sdmmc1_dat6", NULL, "sim_pwrctrl", NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT7, 129, + "sdmmc1_dat7", NULL, "sim_rst", NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CLK, 130, + "sdmmc2_clk", "mcspi3_clk", NULL, NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CMD, 131, + "sdmmc2_cmd", "mcspi3_simo", NULL, NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT0, 132, + "sdmmc2_dat0", "mcspi3_somi", NULL, NULL, + "gpio_132", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT1, 133, + "sdmmc2_dat1", NULL, NULL, NULL, + "gpio_133", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT2, 134, + "sdmmc2_dat2", "mcspi3_cs1", NULL, NULL, + "gpio_134", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT3, 135, + "sdmmc2_dat3", "mcspi3_cs0", NULL, NULL, + "gpio_135", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT4, 136, + "sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0", + "gpio_136", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, NULL, + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, NULL, + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT2, 4, + "sys_boot2", NULL, NULL, NULL, + "gpio_4", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, NULL, + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, NULL, + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, NULL, + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, NULL, + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT1, 10, + "sys_clkout1", NULL, NULL, NULL, + "gpio_10", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT2, 186, + "sys_clkout2", NULL, NULL, NULL, + "gpio_186", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKREQ, 1, + "sys_clkreq", NULL, NULL, NULL, + "gpio_1", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NIRQ, 0, + "sys_nirq", NULL, NULL, NULL, + "gpio_0", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NRESWARM, 30, + "sys_nreswarm", NULL, NULL, NULL, + "gpio_30", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_OFF_MODE, 9, + "sys_off_mode", NULL, NULL, NULL, + "gpio_9", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", NULL, NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RX, 151, + "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "gpio_151", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", NULL, NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_CTS, 144, + "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, + "gpio_144", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RTS, 145, + "uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL, + "gpio_145", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RX, 147, + "uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL, + "gpio_147", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_TX, 146, + "uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL, + "gpio_146", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_CTS_RCTX, 163, + "uart3_cts_rctx", NULL, NULL, NULL, + "gpio_163", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RTS_SD, 164, + "uart3_rts_sd", NULL, NULL, NULL, + "gpio_164", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RX_IRRX, 165, + "uart3_rx_irrx", NULL, NULL, NULL, + "gpio_165", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, + "uart3_tx_irtx", NULL, NULL, NULL, + "gpio_166", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +/* + * Signals different on CBC package compared to the superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_mux __initdata omap3_cbc_subset[] = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_subset NULL +#endif + +/* + * Balls for CBC package + * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom) + * + * FIXME: What's up with the outdated TI documentation? See: + * + * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package + * http://community.ti.com/forums/t/10982.aspx + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_ball __initdata omap3_cbc_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), + _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "e26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "a24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D6, "p25", NULL), + _OMAP3_BALLENTRY(CAM_D7, "p26", NULL), + _OMAP3_BALLENTRY(CAM_D8, "n25", NULL), + _OMAP3_BALLENTRY(CAM_D9, "n26", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "b23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "c23", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL), + _OMAP3_BALLENTRY(CAM_VS, "d23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "a23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ad4", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae4", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af6", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ae6", NULL), + _OMAP3_BALLENTRY(ETK_D13, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ae9", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D3, "aa3", NULL), + _OMAP3_BALLENTRY(ETK_D4, "y3", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ab1", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ae3", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D8, "aa4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "f1", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "f2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "e2", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "d1", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"), + _OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"), + _OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"), + _OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"), + _OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"), + _OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"), + _OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"), + _OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "r2", NULL), + _OMAP3_BALLENTRY(UART1_RX, "h3", NULL), + _OMAP3_BALLENTRY(UART1_TX, "l4", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "y24", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad21", NULL), + _OMAP3_BALLENTRY(UART2_TX, "ad22", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_ball NULL +#endif + +/* + * Signals different on CUS package compared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_mux __initdata omap3_cus_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_subset NULL +#endif + +/* + * Balls for CUS package + * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_ball __initdata omap3_cus_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL), + _OMAP3_BALLENTRY(CAM_D10, "f21", NULL), + _OMAP3_BALLENTRY(CAM_D11, "g21", NULL), + _OMAP3_BALLENTRY(CAM_D2, "g19", NULL), + _OMAP3_BALLENTRY(CAM_D3, "f19", NULL), + _OMAP3_BALLENTRY(CAM_D4, "g20", NULL), + _OMAP3_BALLENTRY(CAM_D5, "b21", NULL), + _OMAP3_BALLENTRY(CAM_D6, "l24", NULL), + _OMAP3_BALLENTRY(CAM_D7, "k24", NULL), + _OMAP3_BALLENTRY(CAM_D8, "j23", NULL), + _OMAP3_BALLENTRY(CAM_D9, "k23", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "h24", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a22", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL), + _OMAP3_BALLENTRY(CAM_VS, "e18", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "f18", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ad6", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ac6", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D11, "ac9", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ac10", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ad11", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ac11", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ad12", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ac7", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ad8", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ac5", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ac8", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad9", NULL), + _OMAP3_BALLENTRY(ETK_D8, "ac4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ad5", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "k4", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "k3", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "j4", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "j3", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL), + _OMAP3_BALLENTRY(GPMC_D10, "u1", NULL), + _OMAP3_BALLENTRY(GPMC_D11, "r3", NULL), + _OMAP3_BALLENTRY(GPMC_D12, "t3", NULL), + _OMAP3_BALLENTRY(GPMC_D13, "u2", NULL), + _OMAP3_BALLENTRY(GPMC_D14, "v1", NULL), + _OMAP3_BALLENTRY(GPMC_D15, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_D8, "r2", NULL), + _OMAP3_BALLENTRY(GPMC_D9, "t2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "w6", NULL), + _OMAP3_BALLENTRY(UART1_RX, "v7", NULL), + _OMAP3_BALLENTRY(UART1_TX, "w7", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_ball NULL +#endif + +/* + * Signals different on CBB package comapared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_mux __initdata omap3_cbb_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_subset NULL +#endif + +/* + * Balls for CBB package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_ball __initdata omap3_cbb_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_ball NULL +#endif + +/* + * Signals different on 36XX CBP package comapared to 34XX CBC package + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP) +struct omap_mux __initdata omap36xx_cbp_subset[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, "csi2_dx2", NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, "csi2_dy2", NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", "ssi2_wake", NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", "ssi2_rdy_tx", NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", "ssi2_dat_rx", NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", "ssi2_flag_rx", NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", "ssi2_rdy_rx", NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", "ssi2_dat_tx", NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", "ssi2_flag_tx", NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", "dsi_dx0", "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", "dsi_dy0", "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", "dsi_dx1", NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", "dsi_dy1", NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", "dssvenc656_data6", + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", "dssvenc656_data7", + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, "uart3_rx_irrx", NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, "uart3_tx_irtx", NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(GPMC_A11, 0, + "gpmc_a11", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, "uart4_tx", NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", "uart2_tx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", "uart2_rx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", "uart2_rts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", "uart2_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", "adpllv2d_dithering_en1", + "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", "ssi1_flag_rx", NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", "ssi1_wake", NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, + "sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, + "sad2d_mcad28", "mad2d_mcad28", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, + "sad2d_mcad29", "mad2d_mcad29", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, + "sad2d_mcad32", "mad2d_mcad32", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, + "sad2d_mcad33", "mad2d_mcad33", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, + "sad2d_mcad34", "mad2d_mcad34", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, + "sad2d_mcad35", "mad2d_mcad35", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, + "sad2d_mcad36", "mad2d_mcad36", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MREAD, 0, + "sad2d_mread", "mad2d_sread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, + "sad2d_mwrite", "mad2d_swrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, + "sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SREAD, 0, + "sad2d_sread", "mad2d_mread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, + "sad2d_swrite", "mad2d_mwrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", "ms_clk", NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", "ms_bs", NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", "ms_dat0", NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", "ms_dat1", NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", "ms_dat2", NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", "ms_dat3", NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SIM_IO, 126, + "sim_io", "sim_io_low_impedance", NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_CLK, 127, + "sim_clk", NULL, NULL, NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_PWRCTRL, 128, + "sim_pwrctrl", NULL, NULL, NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_RST, 129, + "sim_rst", NULL, NULL, NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, "dss_data18", + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, "dss_data19", + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, "dss_data20", + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21", + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22", + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, "dss_data23", + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_subset NULL +#endif + +/* + * Balls for 36XX CBP package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined (CONFIG_OMAP_PACKAGE_CBP) +struct omap_ball __initdata omap36xx_cbp_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"), + _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"), + _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"), + _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"), + _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"), + _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"), + _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL), + _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL), + _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL), + _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL), + _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL), + _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"), + _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"), + _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"), + _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"), + _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"), + _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"), + _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"), + _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"), + _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"), + _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"), + _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"), + _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"), + _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"), + _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"), + _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"), + _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"), + _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"), + _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), + _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), + _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"), + _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"), + _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"), + _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"), + _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"), + _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"), + _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"), + _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"), + _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"), + _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"), + _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"), + _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"), + _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"), + _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"), + _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"), + _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"), + _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"), + _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"), + _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"), + _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"), + _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"), + _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"), + _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"), + _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"), + _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"), + _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"), + _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"), + _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"), + _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"), + _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"), + _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"), + _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"), + _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"), + _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"), + _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"), + _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"), + _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"), + _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"), + _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"), + _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"), + _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"), + _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"), + _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"), + _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"), + _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"), + _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"), + _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"), + _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), + _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), + _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), + _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), + _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_ball NULL +#endif + +int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) +{ + struct omap_mux *package_subset; + struct omap_ball *package_balls; + + switch (flags & OMAP_PACKAGE_MASK) { + case (OMAP_PACKAGE_CBC): + package_subset = omap3_cbc_subset; + package_balls = omap3_cbc_ball; + break; + case (OMAP_PACKAGE_CBB): + package_subset = omap3_cbb_subset; + package_balls = omap3_cbb_ball; + break; + case (OMAP_PACKAGE_CUS): + package_subset = omap3_cus_subset; + package_balls = omap3_cus_ball; + break; + case (OMAP_PACKAGE_CBP): + package_subset = omap36xx_cbp_subset; + package_balls = omap36xx_cbp_ball; + break; + default: + printk(KERN_ERR "mux: Unknown omap package, mux disabled\n"); + return -EINVAL; + } + + return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE, + OMAP3_CONTROL_PADCONF_MUX_SIZE, + omap3_muxmodes, package_subset, board_subset, + package_balls); +} diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h new file mode 100644 index 000000000000..6543ebf8ecfc --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.h @@ -0,0 +1,398 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU + +#define OMAP3_MUX(mode0, mux_value) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \ + .value = (mux_value), \ +} + +/* + * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing + * + * Extracted from the TRM. Add 0x48002030 to these values to get the + * absolute addresses. The name in the macro is the mode-0 name of + * the pin. NOTE: These registers are 16-bits wide. + * + * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead + * of CHASSIS for some registers. For the defines, we follow the + * 36XX naming, and use SDMMC and CHASSIS. + */ +#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000 +#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002 +#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004 +#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006 +#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008 +#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a +#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c +#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e +#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010 +#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012 +#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014 +#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016 +#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018 +#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a +#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c +#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e +#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020 +#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022 +#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024 +#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026 +#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028 +#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a +#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c +#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e +#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030 +#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032 +#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034 +#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036 +#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038 +#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a +#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c +#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e +#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048 +#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a +#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c +#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e +#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050 +#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052 +#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054 +#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056 +#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058 +#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a +#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c +#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e +#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060 +#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062 +#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064 +#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066 +#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068 +#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a +#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c +#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e +#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070 +#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072 +#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074 +#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076 +#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078 +#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a +#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c +#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e +#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a +#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c +#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e +#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090 +#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092 +#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098 +#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0 +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2 +#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4 +#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6 +#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8 +#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa +#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac +#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae +#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba +#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc +#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be +#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca +#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc +#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce +#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da +#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc +#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de +#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0 +#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2 +#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4 +#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6 +#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8 +#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea +#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec +#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee +#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0 +#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2 +#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4 +#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6 +#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8 +#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa +#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc +#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe +#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100 +#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102 +#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104 +#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106 +#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108 +#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a +#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c +#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e +#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110 +#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e + +/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */ +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126 + +#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128 +#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a +#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c +#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e +#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140 +#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142 +#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144 +#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146 +#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148 +#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a +#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c +#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e +#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150 +#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152 +#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158 +#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e +#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160 +#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162 +#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164 +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166 +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168 +#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a +#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c +#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e +#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170 +#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172 +#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176 +#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188 +#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a +#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c +#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e +#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190 +#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192 +#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194 +#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198 +#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a +#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4 +#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae +#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc + +/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */ +#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204 +#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206 +#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210 +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a +#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c +#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e +#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224 + +#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228 +#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a +#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c +#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e +#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234 + +/* 36xx only */ +#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236 +#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570 +#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572 +#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574 +#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576 +#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578 +#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a +#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c +#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e +#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580 +#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582 +#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584 +#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586 +#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588 +#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a +#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c +#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e +#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594 +#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596 +#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598 +#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a +#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c +#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e +#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0 +#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2 +#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4 + +/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */ +#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126 + +#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8 +#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa +#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac +#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae +#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0 +#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2 +#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4 +#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6 +#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8 +#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba +#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc +#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be +#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0 +#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2 +#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4 +#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6 +#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8 +#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca +#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0 +#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2 +#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4 +#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6 +#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da +#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc +#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de +#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6 +#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea +#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec +#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee +#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0 +#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c +#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e +#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 + +#define OMAP3_CONTROL_PADCONF_MUX_SIZE \ + (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4afadba09477..aa3f65c2ac97 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -27,20 +27,39 @@ * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. - * The primary core will update the this flag using a hardware - * register AuxCoreBoot1. + * The primary core will update this flag using a hardware + * register AuxCoreBoot0. */ ENTRY(omap_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #0x0f -hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1 - ldr r2, [r1] - cmp r2, r0 +hold: ldr r12,=0x103 + dsb + smc @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 bne hold /* - * we've been released from the cpu_release,secondary_stack + * we've been released from the wait loop,secondary_stack * should now contain the SVC stack for this core */ b secondary_startup +END(omap_secondary_startup) + +ENTRY(omap_modify_auxcoreboot0) + stmfd sp!, {r1-r12, lr} + ldr r12, =0x104 + dsb + smc + ldmfd sp!, {r1-r12, pc} +END(omap_modify_auxcoreboot0) + +ENTRY(omap_auxcoreboot_addr) + stmfd sp!, {r2-r12, lr} + ldr r12, =0x105 + dsb + smc + ldmfd sp!, {r2-r12, pc} +END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4890bcf4dadd..38153e5fbca0 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -17,19 +17,15 @@ */ #include <linux/init.h> #include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <asm/cacheflush.h> #include <asm/localtimer.h> #include <asm/smp_scu.h> #include <mach/hardware.h> #include <plat/common.h> -/* Registers used for communicating startup information */ -static void __iomem *omap4_auxcoreboot_reg0; -static void __iomem *omap4_auxcoreboot_reg1; - /* SCU base address */ static void __iomem *scu_base; @@ -65,8 +61,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - /* * Set synchronisation state between this boot processor * and the secondary one @@ -74,18 +68,15 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) spin_lock(&boot_lock); /* - * Update the AuxCoreBoot1 with boot state for secondary core. + * Update the AuxCoreBoot0 with boot state for secondary core. * omap_secondary_startup() routine will hold the secondary core till * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - __raw_writel(cpu, omap4_auxcoreboot_reg1); + omap_modify_auxcoreboot0(0x200, 0x0); + flush_cache_all(); smp_wmb(); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) - ; - /* * Now the secondary core is starting up let it run its * calibrations, then wait for it to finish @@ -99,17 +90,18 @@ static void __init wakeup_secondary(void) { /* * Write the address of secondary startup routine into the - * AuxCoreBoot0 where ROM code will jump and start executing + * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ - __raw_writel(virt_to_phys(omap_secondary_startup), \ - omap4_auxcoreboot_reg0); + omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); smp_wmb(); /* * Send a 'sev' to wake the secondary core from WFE. + * Drain the outstanding writes to memory */ + dsb(); set_event(); mb(); } @@ -136,7 +128,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); unsigned int cpu = smp_processor_id(); - void __iomem *omap4_wkupgen_base; int i; /* sanity check */ @@ -168,12 +159,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - /* Never released */ - omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); - BUG_ON(!omap4_wkupgen_base); - omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; - omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804; - if (max_cpus > 1) { /* * Enable the local timer or broadcast device for the diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 633b216a8b26..d8c8545875b1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -45,6 +45,7 @@ #include <linux/mutex.h> #include <linux/bootmem.h> +#include <plat/common.h> #include <plat/cpu.h> #include <plat/clockdomain.h> #include <plat/powerdomain.h> @@ -210,6 +211,32 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v + * @oh: struct omap_hwmod * + * @autoidle: desired AUTOIDLE bitfield value (0 or 1) + * @v: pointer to register contents to modify + * + * Update the module autoidle bit in @v to be @autoidle for the @oh + * hwmod. The autoidle bit controls whether the module can gate + * internal clocks automatically when it isn't doing anything; the + * exact function of this bit varies on a per-module basis. This + * function does not write to the hardware. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle, + u32 *v) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE)) + return -EINVAL; + + *v &= ~SYSC_AUTOIDLE_MASK; + *v |= autoidle << SYSC_AUTOIDLE_SHIFT; + + return 0; +} + +/** * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware * @oh: struct omap_hwmod * * @@ -326,6 +353,9 @@ static int _init_main_clk(struct omap_hwmod *oh) ret = -EINVAL; oh->_clk = c; + WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n", + oh->clkdev_con_id, c->name); + return ret; } @@ -557,8 +587,19 @@ static void _sysc_enable(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* XXX OCP AUTOIDLE bit? */ + if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) { + idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ? + 0 : 1; + _set_module_autoidle(oh, idlemode, &v); + } + + /* XXX OCP ENAWAKEUP bit? */ + /* + * XXX The clock framework should handle this, by + * calling into this code. But this must wait until the + * clock structures are tagged with omap_hwmod entries + */ if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT && oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY) _set_clockactivity(oh, oh->sysconfig->clockact, &v); @@ -622,7 +663,8 @@ static void _sysc_shutdown(struct omap_hwmod *oh) if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) _set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v); - /* XXX clear OCP AUTOIDLE bit? */ + if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) + _set_module_autoidle(oh, 1, &v); _write_sysconfig(v, oh); } @@ -736,7 +778,7 @@ static int _wait_target_ready(struct omap_hwmod *oh) static int _reset(struct omap_hwmod *oh) { u32 r, v; - int c; + int c = 0; if (!oh->sysconfig || !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) || @@ -758,13 +800,9 @@ static int _reset(struct omap_hwmod *oh) return r; _write_sysconfig(v, oh); - c = 0; - while (c < MAX_MODULE_RESET_WAIT && - !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) & - SYSS_RESETDONE_MASK)) { - udelay(1); - c++; - } + omap_test_timeout((omap_hwmod_readl(oh, oh->sysconfig->syss_offs) & + SYSS_RESETDONE_MASK), + MAX_MODULE_RESET_WAIT, c); if (c == MAX_MODULE_RESET_WAIT) WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n", @@ -884,33 +922,6 @@ static int _shutdown(struct omap_hwmod *oh) } /** - * _write_clockact_lock - set the module's clockactivity bits - * @oh: struct omap_hwmod * - * @clockact: CLOCKACTIVITY field bits - * - * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Returns -EINVAL if the hwmod is in the - * wrong state or returns 0. - */ -static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact) -{ - u32 v; - - if (!oh->sysconfig || - !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)) - return -EINVAL; - - mutex_lock(&omap_hwmod_mutex); - v = oh->_sysc_cache; - _set_clockactivity(oh, clockact, &v); - _write_sysconfig(v, oh); - mutex_unlock(&omap_hwmod_mutex); - - return 0; -} - - -/** * _setup - do initial configuration of omap_hwmod * @oh: struct omap_hwmod * * @@ -948,11 +959,19 @@ static int _setup(struct omap_hwmod *oh) _enable(oh); - if (!(oh->flags & HWMOD_INIT_NO_RESET)) - _reset(oh); - - /* XXX OCP AUTOIDLE bit? */ - /* XXX OCP ENAWAKEUP bit? */ + if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + /* + * XXX Do the OCP_SYSCONFIG bits need to be + * reprogrammed after a reset? If not, then this can + * be removed. If they do, then probably the + * _enable() function should be split to avoid the + * rewrite of the OCP_SYSCONFIG register. + */ + if (oh->sysconfig) { + _update_sysc_cache(oh); + _sysc_enable(oh); + } + } if (!(oh->flags & HWMOD_INIT_NO_IDLE)) _idle(oh); @@ -1348,8 +1367,9 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) /* For each IRQ, DMA, memory area, fill in array.*/ for (i = 0; i < oh->mpu_irqs_cnt; i++) { - (res + r)->start = *(oh->mpu_irqs + i); - (res + r)->end = *(oh->mpu_irqs + i); + (res + r)->name = (oh->mpu_irqs + i)->name; + (res + r)->start = (oh->mpu_irqs + i)->irq; + (res + r)->end = (oh->mpu_irqs + i)->irq; (res + r)->flags = IORESOURCE_IRQ; r++; } @@ -1454,62 +1474,6 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, } /** - * omap_hwmod_set_clockact_none - set clockactivity test to BOTH - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_both(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to MAIN - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_main(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to ICLK - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to NONE - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_none(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_NONE); -} - -/** * omap_hwmod_enable_wakeup - allow device to wake up the system * @oh: struct omap_hwmod * * diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c new file mode 100644 index 000000000000..126a9396b3a8 --- /dev/null +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -0,0 +1,126 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2420_rate_table[] = { + /* PRCM I - FAST */ + {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, + RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, + RATE_IN_242X}, + + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c new file mode 100644 index 000000000000..edb81672c844 --- /dev/null +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -0,0 +1,133 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2430_rate_table[] = { + /* PRCM #4 - ratio2 (ES2.1) - FAST */ + {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - FAST */ + {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #4 - ratio1 (ES2.1) - SLOW */ + {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - SLOW */ + {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h new file mode 100644 index 000000000000..ed6df04e2f29 --- /dev/null +++ b/arch/arm/mach-omap2/opp2xxx.h @@ -0,0 +1,424 @@ +/* + * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H +#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H + +/** + * struct prcm_config - define clock rates on a per-OPP basis (24xx) + * + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP + * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * This is deprecated. As soon as we have a decent OPP API, we should + * move all this stuff to it. + */ +struct prcm_config { + unsigned long xtal_speed; /* crystal rate */ + unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ + unsigned long mpu_speed; /* speed of MPU */ + unsigned long cm_clksel_mpu; /* mpu divider */ + unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ + unsigned long cm_clksel_gfx; /* gfx dividers */ + unsigned long cm_clksel1_core; /* major subsystem dividers */ + unsigned long cm_clksel1_pll; /* m,n */ + unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ + unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ + unsigned long base_sdrc_rfr; /* base refresh timing for a set */ + unsigned char flags; +}; + + +/* Core fields for cm_clksel, not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/*------------------------------------------------------------------------- + * Voltage/DPLL ratios + *-------------------------------------------------------------------------*/ + +/* 2430 Ratio's, 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R1_CLKSEL_L4 | R1_CLKSEL_L3) +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF) +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R2_CLKSEL_L4 | R2_CLKSEL_L3) +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF) +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Bootm (BYPASS) */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RB_CLKSEL_L4 | RB_CLKSEL_L3) +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF) +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2420 Ratio Equivalents */ +#define RXX_CLKSEL_VLYNQ (0x12 << 15) +#define RXX_CLKSEL_SSI (0x8 << 20) + +/* 2420-PRCM III 532MHz core */ +#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ +#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ +#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ +#define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ + RIII_CLKSEL_L3) +#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ +#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU +#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ +#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ +#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ +#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ +#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ +#define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ + RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ + RIII_CLKSEL_DSP) +#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ +#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX + +/* 2420-PRCM II 600MHz core */ +#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ +#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ +#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ +#define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \ + RII_CLKSEL_L3) +#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ +#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU +#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ +#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ +#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ +#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ +#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \ + RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ + RII_CLKSEL_DSP) +#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ +#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX + +/* 2420-PRCM I 660MHz core */ +#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ +#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ +#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ +#define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RI_CLKSEL_L4 | RI_CLKSEL_L3) +#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ +#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU +#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ +#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ +#define RI_SYNC_DSP (1 << 7) /* Activate sync */ +#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ +#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \ + RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ + RI_CLKSEL_DSP) +#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ +#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX + +/* 2420-PRCM VII (boot) */ +#define RVII_CLKSEL_L3 (1 << 0) +#define RVII_CLKSEL_L4 (1 << 5) +#define RVII_CLKSEL_DSS1 (1 << 8) +#define RVII_CLKSEL_DSS2 (0 << 13) +#define RVII_CLKSEL_VLYNQ (1 << 15) +#define RVII_CLKSEL_SSI (1 << 20) +#define RVII_CLKSEL_USB (1 << 25) + +#define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ + RVII_CLKSEL_VLYNQ | \ + RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \ + RVII_CLKSEL_L4 | RVII_CLKSEL_L3) + +#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ +#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU + +#define RVII_CLKSEL_DSP (1 << 0) +#define RVII_CLKSEL_DSP_IF (1 << 5) +#define RVII_SYNC_DSP (0 << 7) +#define RVII_CLKSEL_IVA (1 << 8) +#define RVII_SYNC_IVA (0 << 13) +#define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \ + RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \ + RVII_CLKSEL_DSP) + +#define RVII_CLKSEL_GFX (1 << 0) +#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX + +/*------------------------------------------------------------------------- + * 2430 Target modes: Along with each configuration the CPU has several + * modes which goes along with them. Modes mainly are the addition of + * describe DPLL combinations to go along with a ratio. + *-------------------------------------------------------------------------*/ + +/* Hardware governed */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* + * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed + * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz + */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M5A_DPLL_MULT_13 (61 << 12) +#define M5A_DPLL_DIV_13 (2 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M5A_DPLL_MULT_19 (55 << 12) +#define M5A_DPLL_DIV_19 (3 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) +/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) +/* + * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz + */ +#define M4_DPLL_MULT_12 (133 << 12) +#define M4_DPLL_DIV_12 (3 << 8) +#define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +#define M4_DPLL_MULT_13 (399 << 12) +#define M4_DPLL_DIV_13 (12 << 8) +#define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +#define M4_DPLL_MULT_19 (145 << 12) +#define M4_DPLL_DIV_19 (6 << 8) +#define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* + * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz + */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M3_DPLL_MULT_13 (76 << 12) +#define M3_DPLL_DIV_13 (2 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M3_DPLL_MULT_19 (17 << 12) +#define M3_DPLL_DIV_19 (0 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* + * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz + */ +#define M2_DPLL_MULT_12 (55 << 12) +#define M2_DPLL_DIV_12 (1 << 8) +#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, + * relock time issue */ +/* Core frequency changed from 330/165 to 329/164 MHz*/ +#define M2_DPLL_MULT_13 (76 << 12) +#define M2_DPLL_DIV_13 (2 << 8) +#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +#define M2_DPLL_MULT_19 (17 << 12) +#define M2_DPLL_DIV_19 (0 << 8) +#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_12) + +#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_13) + +#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_19) + +/* + * 2430 - chassis (sedna) + * 165 (ratio1) same as above #2 + * 150 (ratio1) + * 133 (ratio2) same as above #4 + * 110 (ratio2) same as above #3 + * 104 (ratio2) + * boot (boot) + */ + +/* PRCM I target DPLL = 2*330MHz = 660MHz */ +#define MI_DPLL_MULT_12 (55 << 12) +#define MI_DPLL_DIV_12 (1 << 8) +#define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +/* + * 2420 Equivalent - mode registers + * PRCM II , target DPLL = 2*300MHz = 600MHz + */ +#define MII_DPLL_MULT_12 (50 << 12) +#define MII_DPLL_DIV_12 (1 << 8) +#define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define MII_DPLL_MULT_13 (300 << 12) +#define MII_DPLL_DIV_13 (12 << 8) +#define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +/* PRCM III target DPLL = 2*266 = 532MHz*/ +#define MIII_DPLL_MULT_12 (133 << 12) +#define MIII_DPLL_DIV_12 (5 << 8) +#define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_12 | \ + MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12) +#define MIII_DPLL_MULT_13 (266 << 12) +#define MIII_DPLL_DIV_13 (12 << 8) +#define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_13 | \ + MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13) + +/* PRCM VII (boot bypass) */ +#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL +#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL + +/* High and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* MPU speed defines */ +#define S12M 12000000 +#define S13M 13000000 +#define S19M 19200000 +#define S26M 26000000 +#define S100M 100000000 +#define S133M 133000000 +#define S150M 150000000 +#define S164M 164000000 +#define S165M 165000000 +#define S199M 199000000 +#define S200M 200000000 +#define S266M 266000000 +#define S300M 300000000 +#define S329M 329000000 +#define S330M 330000000 +#define S399M 399000000 +#define S400M 400000000 +#define S532M 532000000 +#define S600M 600000000 +#define S658M 658000000 +#define S660M 660000000 +#define S798M 798000000 + + +extern const struct prcm_config omap2420_rate_table[]; +extern const struct prcm_config omap2430_rate_table[]; +extern const struct prcm_config *rate_table; +extern const struct prcm_config *curr_prcm_set; + +#endif diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 8baa30d2acfb..860b755d2220 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -326,7 +326,7 @@ int pm_dbg_regset_save(int reg_set) return 0; } -static const char pwrdm_state_names[][4] = { +static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { "OFF", "RET", "INA", @@ -381,7 +381,7 @@ static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user) seq_printf(s, "%s (%s)", pwrdm->name, pwrdm_state_names[pwrdm->state]); - for (i = 0; i < 4; i++) + for (i = 0; i < PWRDM_MAX_PWRSTS; i++) seq_printf(s, ",%s:%d", pwrdm_state_names[i], pwrdm->state_counter[i]); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index b6990e377783..26b3f3ee82a3 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -10,9 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN -# define DEBUG -#endif +#undef DEBUG #include <linux/kernel.h> #include <linux/module.h> @@ -160,7 +158,7 @@ static __init void _pwrdm_setup(struct powerdomain *pwrdm) { int i; - for (i = 0; i < 4; i++) + for (i = 0; i < PWRDM_MAX_PWRSTS; i++) pwrdm->state_counter[i] = 0; pwrdm_wait_transition(pwrdm); @@ -480,7 +478,7 @@ int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n", @@ -513,7 +511,7 @@ int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: hardware will no longer wake up %s after %s " @@ -550,7 +548,7 @@ int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP, @@ -573,10 +571,10 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -584,7 +582,7 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n", @@ -612,10 +610,10 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -623,7 +621,7 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: will no longer prevent %s from sleeping if " @@ -655,10 +653,10 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -666,7 +664,7 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP, @@ -985,6 +983,9 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) if (pwrdm->banks < (bank + 1)) return -EEXIST; + if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK) + bank = 1; + /* * The register bit names below may not correspond to the * actual names of the bits in each powerdomain's register, @@ -1032,6 +1033,9 @@ int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) if (pwrdm->banks < (bank + 1)) return -EEXIST; + if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK) + bank = 1; + /* * The register bit names below may not correspond to the * actual names of the bits in each powerdomain's register, diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index fd09b0827df0..588f7e07d0ea 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -190,6 +190,7 @@ static struct powerdomain mpu_34xx_pwrdm = { .wkdep_srcs = mpu_34xx_wkdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_MPU_QUIRK, .banks = 1, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index cb1ae84e0925..61ac2a418bd0 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -4,10 +4,12 @@ /* * OMAP2/3 PRCM base and module definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley + * OMAP4 defines in this file are automatically generated from the OMAP hardware + * databases. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -49,6 +51,73 @@ #define OMAP3430_NEON_MOD 0xb00 #define OMAP3430ES2_USBHOST_MOD 0xc00 +#define BITS(n_bit) \ + (((1 << n_bit) - 1) | (1 << n_bit)) + +#define BITFIELD(l_bit, u_bit) \ + (BITS(u_bit) & ~((BITS(l_bit)) >> 1)) + +/* OMAP44XX specific module offsets */ + +/* CM1 instances */ + +#define OMAP4430_CM1_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_CM1_CKGEN_MOD 0x0100 +#define OMAP4430_CM1_MPU_MOD 0x0300 +#define OMAP4430_CM1_TESLA_MOD 0x0400 +#define OMAP4430_CM1_ABE_MOD 0x0500 +#define OMAP4430_CM1_RESTORE_MOD 0x0e00 +#define OMAP4430_CM1_INSTR_MOD 0x0f00 + +/* CM2 instances */ + +#define OMAP4430_CM2_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_CM2_CKGEN_MOD 0x0100 +#define OMAP4430_CM2_ALWAYS_ON_MOD 0x0600 +#define OMAP4430_CM2_CORE_MOD 0x0700 +#define OMAP4430_CM2_IVAHD_MOD 0x0f00 +#define OMAP4430_CM2_CAM_MOD 0x1000 +#define OMAP4430_CM2_DSS_MOD 0x1100 +#define OMAP4430_CM2_GFX_MOD 0x1200 +#define OMAP4430_CM2_L3INIT_MOD 0x1300 +#define OMAP4430_CM2_L4PER_MOD 0x1400 +#define OMAP4430_CM2_CEFUSE_MOD 0x1600 +#define OMAP4430_CM2_RESTORE_MOD 0x1e00 +#define OMAP4430_CM2_INSTR_MOD 0x1f00 + +/* PRM instances */ + +#define OMAP4430_PRM_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_PRM_CKGEN_MOD 0x0100 +#define OMAP4430_PRM_MPU_MOD 0x0300 +#define OMAP4430_PRM_TESLA_MOD 0x0400 +#define OMAP4430_PRM_ABE_MOD 0x0500 +#define OMAP4430_PRM_ALWAYS_ON_MOD 0x0600 +#define OMAP4430_PRM_CORE_MOD 0x0700 +#define OMAP4430_PRM_IVAHD_MOD 0x0f00 +#define OMAP4430_PRM_CAM_MOD 0x1000 +#define OMAP4430_PRM_DSS_MOD 0x1100 +#define OMAP4430_PRM_GFX_MOD 0x1200 +#define OMAP4430_PRM_L3INIT_MOD 0x1300 +#define OMAP4430_PRM_L4PER_MOD 0x1400 +#define OMAP4430_PRM_CEFUSE_MOD 0x1600 +#define OMAP4430_PRM_WKUP_MOD 0x1700 +#define OMAP4430_PRM_WKUP_CM_MOD 0x1800 +#define OMAP4430_PRM_EMU_MOD 0x1900 +#define OMAP4430_PRM_EMU_CM_MOD 0x1a00 +#define OMAP4430_PRM_DEVICE_MOD 0x1b00 +#define OMAP4430_PRM_INSTR_MOD 0x1f00 + +/* SCRM instances */ + +#define OMAP4430_SCRM_SCRM_MOD 0x0000 + +/* CHIRONSS instances */ + +#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD 0x0000 +#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD 0x0200 +#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD 0x0400 +#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD 0x0800 /* 24XX register bits shared between CM & PRM registers */ diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 029d376198d4..3ea8177ffb25 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -34,6 +34,7 @@ static void __iomem *prm_base; static void __iomem *cm_base; +static void __iomem *cm2_base; #define MAX_MODULE_ENABLE_WAIT 100000 @@ -170,14 +171,12 @@ u32 prm_read_mod_reg(s16 module, u16 idx) { return __omap_prcm_read(prm_base, module, idx); } -EXPORT_SYMBOL(prm_read_mod_reg); /* Write into a register in a PRM module */ void prm_write_mod_reg(u32 val, s16 module, u16 idx) { __omap_prcm_write(val, prm_base, module, idx); } -EXPORT_SYMBOL(prm_write_mod_reg); /* Read-modify-write a register in a PRM module. Caller must lock */ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) @@ -191,21 +190,18 @@ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) return v; } -EXPORT_SYMBOL(prm_rmw_mod_reg_bits); /* Read a register in a CM module */ u32 cm_read_mod_reg(s16 module, u16 idx) { return __omap_prcm_read(cm_base, module, idx); } -EXPORT_SYMBOL(cm_read_mod_reg); /* Write into a register in a CM module */ void cm_write_mod_reg(u32 val, s16 module, u16 idx) { __omap_prcm_write(val, cm_base, module, idx); } -EXPORT_SYMBOL(cm_write_mod_reg); /* Read-modify-write a register in a CM module. Caller must lock */ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) @@ -219,7 +215,6 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) return v; } -EXPORT_SYMBOL(cm_rmw_mod_reg_bits); /** * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness @@ -247,9 +242,8 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name) BUG(); /* Wait for lock */ - while (((__raw_readl(reg) & mask) != ena) && - (i++ < MAX_MODULE_ENABLE_WAIT)) - udelay(1); + omap_test_timeout(((__raw_readl(reg) & mask) == ena), + MAX_MODULE_ENABLE_WAIT, i); if (i < MAX_MODULE_ENABLE_WAIT) pr_debug("cm: Module associated with clock %s ready after %d " @@ -265,6 +259,7 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { prm_base = omap2_globals->prm; cm_base = omap2_globals->cm; + cm2_base = omap2_globals->cm2; } #ifdef CONFIG_ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h new file mode 100644 index 000000000000..301c810fb269 --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-44xx.h @@ -0,0 +1,2205 @@ +/* + * OMAP44xx Power Management register bits + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H + +#include "prm.h" + + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT (1 << 1) +#define OMAP4430_ABBOFF_ACT_EXPORT_MASK BITFIELD(1, 1) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT (1 << 2) +#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_ABB_IVA_DONE_EN_SHIFT (1 << 31) +#define OMAP4430_ABB_IVA_DONE_EN_MASK BITFIELD(31, 31) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_ABB_IVA_DONE_ST_SHIFT (1 << 31) +#define OMAP4430_ABB_IVA_DONE_ST_MASK BITFIELD(31, 31) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_ABB_MPU_DONE_EN_SHIFT (1 << 7) +#define OMAP4430_ABB_MPU_DONE_EN_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_ABB_MPU_DONE_ST_SHIFT (1 << 7) +#define OMAP4430_ABB_MPU_DONE_ST_MASK BITFIELD(7, 7) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_ACTIVE_FBB_SEL_SHIFT (1 << 2) +#define OMAP4430_ACTIVE_FBB_SEL_MASK BITFIELD(2, 2) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_ACTIVE_RBB_SEL_SHIFT (1 << 1) +#define OMAP4430_ACTIVE_RBB_SEL_MASK BITFIELD(1, 1) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_AESSMEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_AESSMEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_AESSMEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_AESSMEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_ABE_PWRSTST */ +#define OMAP4430_AESSMEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_AESSMEM_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_AIPOFF_SHIFT (1 << 8) +#define OMAP4430_AIPOFF_MASK BITFIELD(8, 8) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK BITFIELD(0, 1) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT (1 << 4) +#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK BITFIELD(4, 5) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT (1 << 2) +#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK BITFIELD(2, 3) + +/* Used by PM_CAM_PWRSTCTRL */ +#define OMAP4430_CAM_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_CAM_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_CAM_PWRSTST */ +#define OMAP4430_CAM_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_CAM_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_CLKREQCTRL */ +#define OMAP4430_CLKREQ_COND_SHIFT (1 << 0) +#define OMAP4430_CLKREQ_COND_MASK BITFIELD(0, 2) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_CMDRA_VDD_CORE_L_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_CMDRA_VDD_IVA_L_MASK BITFIELD(8, 15) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_CMDRA_VDD_MPU_L_MASK BITFIELD(16, 23) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_CORE_L_SHIFT (1 << 4) +#define OMAP4430_CMD_VDD_CORE_L_MASK BITFIELD(4, 4) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_IVA_L_SHIFT (1 << 12) +#define OMAP4430_CMD_VDD_IVA_L_MASK BITFIELD(12, 12) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_MPU_L_SHIFT (1 << 17) +#define OMAP4430_CMD_VDD_MPU_L_MASK BITFIELD(17, 17) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT (1 << 6) +#define OMAP4430_CORE_OCMRAM_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_DATA_SHIFT (1 << 16) +#define OMAP4430_DATA_MASK BITFIELD(16, 23) + +/* Used by PRM_DEVICE_OFF_CTRL */ +#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT (1 << 0) +#define OMAP4430_DEVICE_OFF_ENABLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_DFILTEREN_SHIFT (1 << 6) +#define OMAP4430_DFILTEREN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ +#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT (1 << 4) +#define OMAP4430_DPLL_ABE_RECAL_EN_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT (1 << 4) +#define OMAP4430_DPLL_ABE_RECAL_ST_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT (1 << 0) +#define OMAP4430_DPLL_CORE_RECAL_EN_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT (1 << 0) +#define OMAP4430_DPLL_CORE_RECAL_ST_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT (1 << 6) +#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT (1 << 6) +#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ +#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT (1 << 2) +#define OMAP4430_DPLL_IVA_RECAL_EN_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT (1 << 2) +#define OMAP4430_DPLL_IVA_RECAL_ST_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT (1 << 1) +#define OMAP4430_DPLL_MPU_RECAL_EN_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT (1 << 1) +#define OMAP4430_DPLL_MPU_RECAL_ST_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT (1 << 3) +#define OMAP4430_DPLL_PER_RECAL_EN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT (1 << 3) +#define OMAP4430_DPLL_PER_RECAL_ST_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT (1 << 7) +#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT (1 << 7) +#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT (1 << 5) +#define OMAP4430_DPLL_USB_RECAL_EN_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT (1 << 5) +#define OMAP4430_DPLL_USB_RECAL_ST_MASK BITFIELD(5, 5) + +/* Used by PM_DSS_PWRSTCTRL */ +#define OMAP4430_DSS_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_DSS_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_DSS_PWRSTCTRL */ +#define OMAP4430_DSS_MEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_DSS_MEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_DSS_PWRSTST */ +#define OMAP4430_DSS_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_DSS_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT (1 << 8) +#define OMAP4430_DUCATI_L2RAM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT (1 << 22) +#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK BITFIELD(22, 23) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT (1 << 11) +#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK BITFIELD(11, 11) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT (1 << 10) +#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK BITFIELD(10, 11) + +/* Used by RM_MPU_RSTST */ +#define OMAP4430_EMULATION_RST_SHIFT (1 << 0) +#define OMAP4430_EMULATION_RST_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_EMULATION_RST1ST_SHIFT (1 << 3) +#define OMAP4430_EMULATION_RST1ST_MASK BITFIELD(3, 3) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_EMULATION_RST2ST_SHIFT (1 << 4) +#define OMAP4430_EMULATION_RST2ST_MASK BITFIELD(4, 4) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT (1 << 3) +#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK BITFIELD(3, 3) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT (1 << 4) +#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK BITFIELD(4, 4) + +/* Used by PM_EMU_PWRSTCTRL */ +#define OMAP4430_EMU_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_EMU_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_EMU_PWRSTST */ +#define OMAP4430_EMU_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_EMU_BANK_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP + */ +#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT (1 << 0) +#define OMAP4430_ENABLE_RTA_EXPORT_MASK BITFIELD(0, 0) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC1_SHIFT (1 << 3) +#define OMAP4430_ENFUNC1_MASK BITFIELD(3, 3) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC3_SHIFT (1 << 5) +#define OMAP4430_ENFUNC3_MASK BITFIELD(5, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC4_SHIFT (1 << 6) +#define OMAP4430_ENFUNC4_MASK BITFIELD(6, 6) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC5_SHIFT (1 << 7) +#define OMAP4430_ENFUNC5_MASK BITFIELD(7, 7) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_ERRORGAIN_SHIFT (1 << 16) +#define OMAP4430_ERRORGAIN_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_ERROROFFSET_SHIFT (1 << 24) +#define OMAP4430_ERROROFFSET_MASK BITFIELD(24, 31) + +/* Used by PRM_RSTST */ +#define OMAP4430_EXTERNAL_WARM_RST_SHIFT (1 << 5) +#define OMAP4430_EXTERNAL_WARM_RST_MASK BITFIELD(5, 5) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_FORCEUPDATE_SHIFT (1 << 1) +#define OMAP4430_FORCEUPDATE_MASK BITFIELD(1, 1) + +/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */ +#define OMAP4430_FORCEUPDATEWAIT_SHIFT (1 << 8) +#define OMAP4430_FORCEUPDATEWAIT_MASK BITFIELD(8, 31) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */ +#define OMAP4430_FORCEWKUP_EN_SHIFT (1 << 10) +#define OMAP4430_FORCEWKUP_EN_MASK BITFIELD(10, 10) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_FORCEWKUP_ST_SHIFT (1 << 10) +#define OMAP4430_FORCEWKUP_ST_MASK BITFIELD(10, 10) + +/* Used by PM_GFX_PWRSTCTRL */ +#define OMAP4430_GFX_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_GFX_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_GFX_PWRSTST */ +#define OMAP4430_GFX_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_GFX_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_RSTST */ +#define OMAP4430_GLOBAL_COLD_RST_SHIFT (1 << 0) +#define OMAP4430_GLOBAL_COLD_RST_MASK BITFIELD(0, 0) + +/* Used by PRM_RSTST */ +#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT (1 << 1) +#define OMAP4430_GLOBAL_WARM_SW_RST_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_GLOBAL_WUEN_SHIFT (1 << 16) +#define OMAP4430_GLOBAL_WUEN_MASK BITFIELD(16, 16) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_HSMCODE_SHIFT (1 << 0) +#define OMAP4430_HSMCODE_MASK BITFIELD(0, 2) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_HSMODEEN_SHIFT (1 << 3) +#define OMAP4430_HSMODEEN_MASK BITFIELD(3, 3) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_HSSCLH_SHIFT (1 << 16) +#define OMAP4430_HSSCLH_MASK BITFIELD(16, 23) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_HSSCLL_SHIFT (1 << 24) +#define OMAP4430_HSSCLL_MASK BITFIELD(24, 31) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_HWA_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_HWA_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_HWA_MEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_HWA_MEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_HWA_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_HWA_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by RM_MPU_RSTST */ +#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT (1 << 1) +#define OMAP4430_ICECRUSHER_MPU_RST_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_ICECRUSHER_RST1ST_SHIFT (1 << 5) +#define OMAP4430_ICECRUSHER_RST1ST_MASK BITFIELD(5, 5) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_ICECRUSHER_RST2ST_SHIFT (1 << 6) +#define OMAP4430_ICECRUSHER_RST2ST_MASK BITFIELD(6, 6) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT (1 << 5) +#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK BITFIELD(5, 5) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT (1 << 6) +#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK BITFIELD(6, 6) + +/* Used by PRM_RSTST */ +#define OMAP4430_ICEPICK_RST_SHIFT (1 << 9) +#define OMAP4430_ICEPICK_RST_MASK BITFIELD(9, 9) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_INITVDD_SHIFT (1 << 2) +#define OMAP4430_INITVDD_MASK BITFIELD(2, 2) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_INITVOLTAGE_SHIFT (1 << 8) +#define OMAP4430_INITVOLTAGE_MASK BITFIELD(8, 15) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_INTRANSITION_SHIFT (1 << 20) +#define OMAP4430_INTRANSITION_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_IO_EN_SHIFT (1 << 9) +#define OMAP4430_IO_EN_MASK BITFIELD(9, 9) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_IO_ON_STATUS_SHIFT (1 << 5) +#define OMAP4430_IO_ON_STATUS_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_IO_ST_SHIFT (1 << 9) +#define OMAP4430_IO_ST_MASK BITFIELD(9, 9) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOCLK_OVERRIDE_SHIFT (1 << 0) +#define OMAP4430_ISOCLK_OVERRIDE_MASK BITFIELD(0, 0) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOCLK_STATUS_SHIFT (1 << 1) +#define OMAP4430_ISOCLK_STATUS_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOOVR_EXTEND_SHIFT (1 << 4) +#define OMAP4430_ISOOVR_EXTEND_MASK BITFIELD(4, 4) + +/* Used by PRM_IO_COUNT */ +#define OMAP4430_ISO_2_ON_TIME_SHIFT (1 << 0) +#define OMAP4430_ISO_2_ON_TIME_MASK BITFIELD(0, 7) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_L3INIT_PWRSTST */ +#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT (1 << 4) +#define OMAP4430_L3INIT_BANK1_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PM_CORE_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, + * PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, + * PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_LOGICRETSTATE_SHIFT (1 << 2) +#define OMAP4430_LOGICRETSTATE_MASK BITFIELD(2, 2) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_LOGICSTATEST_SHIFT (1 << 2) +#define OMAP4430_LOGICSTATEST_MASK BITFIELD(2, 2) + +/* + * Used by RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, + * RM_WKUP_L4WKUP_CONTEXT, RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, + * RM_WKUP_SYNCTIMER_CONTEXT, RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, + * RM_WKUP_USIM_CONTEXT, RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT, + * RM_EMU_DEBUGSS_CONTEXT, RM_D2D_SAD2D_CONTEXT, RM_D2D_SAD2D_FW_CONTEXT, + * RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, + * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_OCP_WP1_CONTEXT, + * RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT, RM_L3_2_OCMC_RAM_CONTEXT, + * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT, RM_MEMIF_DLL_CONTEXT, + * RM_MEMIF_DLL_H_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, + * RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT, RM_L3INIT_CCPTX_CONTEXT, + * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, + * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT, + * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT, + * RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT, + * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT, + * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT, + * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT, + * RM_ABE_WDT3_CONTEXT, RM_GFX_GFX_CONTEXT, RM_MPU_MPU_CONTEXT, + * RM_CEFUSE_CEFUSE_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, + * RM_ALWON_SR_CORE_CONTEXT, RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, + * RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT, RM_L4PER_ADC_CONTEXT, + * RM_L4PER_DMTIMER10_CONTEXT, RM_L4PER_DMTIMER11_CONTEXT, + * RM_L4PER_DMTIMER2_CONTEXT, RM_L4PER_DMTIMER3_CONTEXT, + * RM_L4PER_DMTIMER4_CONTEXT, RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, + * RM_L4PER_HDQ1W_CONTEXT, RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, + * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, + * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, + * RM_L4PER_MCASP3_CONTEXT, RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, + * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, + * RM_L4PER_MGATE_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, + * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_MSPROHG_CONTEXT, + * RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT, + * RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT + */ +#define OMAP4430_LOSTCONTEXT_DFF_SHIFT (1 << 0) +#define OMAP4430_LOSTCONTEXT_DFF_MASK BITFIELD(0, 0) + +/* + * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT, + * RM_D2D_SAD2D_FW_CONTEXT, RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, + * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT, + * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, + * RM_L4CFG_MAILBOX_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, + * RM_MEMIF_EMIF_2_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT, + * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_L3INIT_HSI_CONTEXT, + * RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_MMC6_CONTEXT, + * RM_L3INIT_USB_HOST_CONTEXT, RM_L3INIT_USB_HOST_FS_CONTEXT, + * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_USB_TLL_CONTEXT, RM_DSS_DSS_CONTEXT, + * RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, RM_L4PER_GPIO4_CONTEXT, + * RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, RM_L4PER_I2C1_CONTEXT, + * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT, + * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4SEC_AES1_CONTEXT, + * RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT, + * RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT + */ +#define OMAP4430_LOSTCONTEXT_RFF_SHIFT (1 << 1) +#define OMAP4430_LOSTCONTEXT_RFF_MASK BITFIELD(1, 1) + +/* Used by RM_ABE_AESS_CONTEXT */ +#define OMAP4430_LOSTMEM_AESSMEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_AESSMEM_MASK BITFIELD(8, 8) + +/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */ +#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CAM_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK BITFIELD(8, 8) + +/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK BITFIELD(9, 9) + +/* Used by RM_L3_2_OCMC_RAM_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK BITFIELD(8, 8) + +/* + * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT, + * RM_SDMA_SDMA_CONTEXT + */ +#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */ +#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_DSS_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_DUCATI_DUCATI_CONTEXT */ +#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK BITFIELD(9, 9) + +/* Used by RM_DUCATI_DUCATI_CONTEXT */ +#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK BITFIELD(8, 8) + +/* Used by RM_EMU_DEBUGSS_CONTEXT */ +#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_EMU_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_GFX_GFX_CONTEXT */ +#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_GFX_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_HWA_MEM_MASK BITFIELD(10, 10) + +/* + * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT, + * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, + * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, RM_L3INIT_SATA_CONTEXT, + * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT, + * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT + */ +#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK BITFIELD(8, 8) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_L1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_MPU_L1_MASK BITFIELD(8, 8) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_L2_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_MPU_L2_MASK BITFIELD(9, 9) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_MPU_RAM_MASK BITFIELD(10, 10) + +/* + * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, + * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, + * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT + */ +#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK BITFIELD(8, 8) + +/* + * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, + * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT + */ +#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_PERIHPMEM_MASK BITFIELD(8, 8) + +/* + * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT, + * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, + * RM_L4SEC_CRYPTODMA_CONTEXT + */ +#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_SL2_CONTEXT */ +#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_SL2_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_TCM1_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_TCM2_MEM_MASK BITFIELD(9, 9) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK BITFIELD(10, 10) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_TESLA_L1_MASK BITFIELD(8, 8) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_TESLA_L2_MASK BITFIELD(9, 9) + +/* Used by RM_WKUP_SARRAM_CONTEXT */ +#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_WKUP_BANK_MASK BITFIELD(8, 8) + +/* + * Used by PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, + * PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, + * PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT (1 << 4) +#define OMAP4430_LOWPOWERSTATECHANGE_MASK BITFIELD(4, 4) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_MEMORYCHANGE_SHIFT (1 << 3) +#define OMAP4430_MEMORYCHANGE_MASK BITFIELD(3, 3) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_READY_SHIFT (1 << 1) +#define OMAP4430_MODEM_READY_MASK BITFIELD(1, 1) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT (1 << 9) +#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK BITFIELD(9, 9) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_SLEEP_ST_SHIFT (1 << 16) +#define OMAP4430_MODEM_SLEEP_ST_MASK BITFIELD(16, 16) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_WAKE_IRQ_SHIFT (1 << 8) +#define OMAP4430_MODEM_WAKE_IRQ_MASK BITFIELD(8, 8) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_MPU_L1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_MPU_L1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_L1_STATEST_SHIFT (1 << 4) +#define OMAP4430_MPU_L1_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L2_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_MPU_L2_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L2_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_MPU_L2_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_L2_STATEST_SHIFT (1 << 6) +#define OMAP4430_MPU_L2_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_RAM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_MPU_RAM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_RAM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_MPU_RAM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_RAM_STATEST_SHIFT (1 << 8) +#define OMAP4430_MPU_RAM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PRM_RSTST */ +#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT (1 << 2) +#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK BITFIELD(2, 2) + +/* Used by PRM_RSTST */ +#define OMAP4430_MPU_WDT_RST_SHIFT (1 << 3) +#define OMAP4430_MPU_WDT_RST_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_L4PER_PWRSTST */ +#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT (1 << 6) +#define OMAP4430_NONRETAINED_BANK_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT (1 << 24) +#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK BITFIELD(24, 25) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT (1 << 12) +#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK BITFIELD(12, 12) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT (1 << 12) +#define OMAP4430_OCP_NRET_BANK_STATEST_MASK BITFIELD(12, 13) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_OFF_SHIFT (1 << 0) +#define OMAP4430_OFF_MASK BITFIELD(0, 7) + +/* Used by PRM_LDO_BANDGAP_CTRL */ +#define OMAP4430_OFF_ENABLE_SHIFT (1 << 0) +#define OMAP4430_OFF_ENABLE_MASK BITFIELD(0, 0) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_ON_SHIFT (1 << 24) +#define OMAP4430_ON_MASK BITFIELD(24, 31) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_ONLP_SHIFT (1 << 16) +#define OMAP4430_ONLP_MASK BITFIELD(16, 23) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_OPP_CHANGE_SHIFT (1 << 2) +#define OMAP4430_OPP_CHANGE_MASK BITFIELD(2, 2) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_OPP_SEL_SHIFT (1 << 0) +#define OMAP4430_OPP_SEL_MASK BITFIELD(0, 1) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_PCHARGECNT_VALUE_SHIFT (1 << 0) +#define OMAP4430_PCHARGECNT_VALUE_MASK BITFIELD(0, 5) + +/* Used by PRM_PSCON_COUNT */ +#define OMAP4430_PCHARGE_TIME_SHIFT (1 << 0) +#define OMAP4430_PCHARGE_TIME_MASK BITFIELD(0, 7) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_PERIPHMEM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_PERIPHMEM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_ABE_PWRSTST */ +#define OMAP4430_PERIPHMEM_STATEST_SHIFT (1 << 8) +#define OMAP4430_PERIPHMEM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PRM_PHASE1_CNDP */ +#define OMAP4430_PHASE1_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE1_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PHASE2A_CNDP */ +#define OMAP4430_PHASE2A_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE2A_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PHASE2B_CNDP */ +#define OMAP4430_PHASE2B_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE2B_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PSCON_COUNT */ +#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT (1 << 8) +#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK BITFIELD(8, 15) + +/* + * Used by PM_EMU_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, + * PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, + * PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, + * PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_POWERSTATE_SHIFT (1 << 0) +#define OMAP4430_POWERSTATE_MASK BITFIELD(0, 1) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_POWERSTATEST_SHIFT (1 << 0) +#define OMAP4430_POWERSTATEST_MASK BITFIELD(0, 1) + +/* Used by PRM_PWRREQCTRL */ +#define OMAP4430_PWRREQ_COND_SHIFT (1 << 0) +#define OMAP4430_PWRREQ_COND_MASK BITFIELD(0, 1) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_CORE_L_SHIFT (1 << 3) +#define OMAP4430_RACEN_VDD_CORE_L_MASK BITFIELD(3, 3) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_IVA_L_SHIFT (1 << 11) +#define OMAP4430_RACEN_VDD_IVA_L_MASK BITFIELD(11, 11) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_MPU_L_SHIFT (1 << 20) +#define OMAP4430_RACEN_VDD_MPU_L_MASK BITFIELD(20, 20) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_CORE_L_SHIFT (1 << 2) +#define OMAP4430_RAC_VDD_CORE_L_MASK BITFIELD(2, 2) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_IVA_L_SHIFT (1 << 10) +#define OMAP4430_RAC_VDD_IVA_L_MASK BITFIELD(10, 10) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_MPU_L_SHIFT (1 << 19) +#define OMAP4430_RAC_VDD_MPU_L_MASK BITFIELD(19, 19) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_DOWN_COUNT_SHIFT (1 << 16) +#define OMAP4430_RAMP_DOWN_COUNT_MASK BITFIELD(16, 21) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT (1 << 24) +#define OMAP4430_RAMP_DOWN_PRESCAL_MASK BITFIELD(24, 25) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_UP_COUNT_SHIFT (1 << 0) +#define OMAP4430_RAMP_UP_COUNT_MASK BITFIELD(0, 5) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_UP_PRESCAL_SHIFT (1 << 8) +#define OMAP4430_RAMP_UP_PRESCAL_MASK BITFIELD(8, 9) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_CORE_L_SHIFT (1 << 1) +#define OMAP4430_RAV_VDD_CORE_L_MASK BITFIELD(1, 1) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_IVA_L_SHIFT (1 << 9) +#define OMAP4430_RAV_VDD_IVA_L_MASK BITFIELD(9, 9) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_MPU_L_SHIFT (1 << 18) +#define OMAP4430_RAV_VDD_MPU_L_MASK BITFIELD(18, 18) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_REGADDR_SHIFT (1 << 8) +#define OMAP4430_REGADDR_MASK BITFIELD(8, 15) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_RET_SHIFT (1 << 8) +#define OMAP4430_RET_MASK BITFIELD(8, 15) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_RETAINED_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_RETAINED_BANK_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_L4PER_PWRSTST */ +#define OMAP4430_RETAINED_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_RETAINED_BANK_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_RETMODE_ENABLE_SHIFT (1 << 0) +#define OMAP4430_RETMODE_ENABLE_MASK BITFIELD(0, 0) + +/* Used by REVISION_PRM */ +#define OMAP4430_REV_SHIFT (1 << 0) +#define OMAP4430_REV_MASK BITFIELD(0, 7) + +/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST1_SHIFT (1 << 0) +#define OMAP4430_RST1_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST1ST_SHIFT (1 << 0) +#define OMAP4430_RST1ST_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST2_SHIFT (1 << 1) +#define OMAP4430_RST2_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST2ST_SHIFT (1 << 1) +#define OMAP4430_RST2ST_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST3_SHIFT (1 << 2) +#define OMAP4430_RST3_MASK BITFIELD(2, 2) + +/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST3ST_SHIFT (1 << 2) +#define OMAP4430_RST3ST_MASK BITFIELD(2, 2) + +/* Used by PRM_RSTTIME */ +#define OMAP4430_RSTTIME1_SHIFT (1 << 0) +#define OMAP4430_RSTTIME1_MASK BITFIELD(0, 9) + +/* Used by PRM_RSTTIME */ +#define OMAP4430_RSTTIME2_SHIFT (1 << 10) +#define OMAP4430_RSTTIME2_MASK BITFIELD(10, 14) + +/* Used by PRM_RSTCTRL */ +#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT (1 << 1) +#define OMAP4430_RST_GLOBAL_COLD_SW_MASK BITFIELD(1, 1) + +/* Used by PRM_RSTCTRL */ +#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT (1 << 0) +#define OMAP4430_RST_GLOBAL_WARM_SW_MASK BITFIELD(0, 0) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_SA_VDD_CORE_L_MASK BITFIELD(0, 0) + +/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT (1 << 0) +#define OMAP4430_SA_VDD_CORE_L_0_6_MASK BITFIELD(0, 6) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_SA_VDD_IVA_L_MASK BITFIELD(8, 8) + +/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT (1 << 8) +#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK BITFIELD(8, 14) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_SA_VDD_MPU_L_MASK BITFIELD(16, 16) + +/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT (1 << 16) +#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK BITFIELD(16, 22) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_SCLH_SHIFT (1 << 0) +#define OMAP4430_SCLH_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_SCLL_SHIFT (1 << 8) +#define OMAP4430_SCLL_MASK BITFIELD(8, 15) + +/* Used by PRM_RSTST */ +#define OMAP4430_SECURE_WDT_RST_SHIFT (1 << 4) +#define OMAP4430_SECURE_WDT_RST_MASK BITFIELD(4, 4) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_SL2_MEM_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_SL2_MEM_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_SL2_MEM_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_SL2_MEM_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_SL2_MEM_STATEST_SHIFT (1 << 6) +#define OMAP4430_SL2_MEM_STATEST_MASK BITFIELD(6, 7) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_SLAVEADDR_SHIFT (1 << 0) +#define OMAP4430_SLAVEADDR_MASK BITFIELD(0, 6) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SLEEP_RBB_SEL_SHIFT (1 << 3) +#define OMAP4430_SLEEP_RBB_SEL_MASK BITFIELD(3, 3) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_SLPCNT_VALUE_SHIFT (1 << 16) +#define OMAP4430_SLPCNT_VALUE_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ +#define OMAP4430_SMPSWAITTIMEMAX_SHIFT (1 << 8) +#define OMAP4430_SMPSWAITTIMEMAX_MASK BITFIELD(8, 23) + +/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ +#define OMAP4430_SMPSWAITTIMEMIN_SHIFT (1 << 8) +#define OMAP4430_SMPSWAITTIMEMIN_MASK BITFIELD(8, 23) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SR2EN_SHIFT (1 << 0) +#define OMAP4430_SR2EN_MASK BITFIELD(0, 0) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_SR2_IN_TRANSITION_SHIFT (1 << 6) +#define OMAP4430_SR2_IN_TRANSITION_MASK BITFIELD(6, 6) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_SR2_STATUS_SHIFT (1 << 3) +#define OMAP4430_SR2_STATUS_MASK BITFIELD(3, 4) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SR2_WTCNT_VALUE_SHIFT (1 << 8) +#define OMAP4430_SR2_WTCNT_VALUE_MASK BITFIELD(8, 15) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_SRAMLDO_STATUS_SHIFT (1 << 8) +#define OMAP4430_SRAMLDO_STATUS_MASK BITFIELD(8, 8) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_SRAM_IN_TRANSITION_SHIFT (1 << 9) +#define OMAP4430_SRAM_IN_TRANSITION_MASK BITFIELD(9, 9) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_SRMODEEN_SHIFT (1 << 4) +#define OMAP4430_SRMODEEN_MASK BITFIELD(4, 4) + +/* Used by PRM_VOLTSETUP_WARMRESET */ +#define OMAP4430_STABLE_COUNT_SHIFT (1 << 0) +#define OMAP4430_STABLE_COUNT_MASK BITFIELD(0, 5) + +/* Used by PRM_VOLTSETUP_WARMRESET */ +#define OMAP4430_STABLE_PRESCAL_SHIFT (1 << 8) +#define OMAP4430_STABLE_PRESCAL_MASK BITFIELD(8, 9) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_TCM1_MEM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_TCM1_MEM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_TCM1_MEM_STATEST_SHIFT (1 << 8) +#define OMAP4430_TCM1_MEM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT (1 << 22) +#define OMAP4430_TCM2_MEM_ONSTATE_MASK BITFIELD(22, 23) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT (1 << 11) +#define OMAP4430_TCM2_MEM_RETSTATE_MASK BITFIELD(11, 11) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_TCM2_MEM_STATEST_SHIFT (1 << 10) +#define OMAP4430_TCM2_MEM_STATEST_MASK BITFIELD(10, 11) + +/* Used by RM_TESLA_RSTST */ +#define OMAP4430_TESLASS_EMU_RSTST_SHIFT (1 << 2) +#define OMAP4430_TESLASS_EMU_RSTST_MASK BITFIELD(2, 2) + +/* Used by RM_TESLA_RSTST */ +#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT (1 << 3) +#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK BITFIELD(3, 3) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_TESLA_EDMA_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_TESLA_EDMA_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_EDMA_STATEST_SHIFT (1 << 8) +#define OMAP4430_TESLA_EDMA_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_TESLA_L1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_TESLA_L1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_L1_STATEST_SHIFT (1 << 4) +#define OMAP4430_TESLA_L1_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L2_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_TESLA_L2_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L2_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_TESLA_L2_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_L2_STATEST_SHIFT (1 << 6) +#define OMAP4430_TESLA_L2_STATEST_MASK BITFIELD(6, 7) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_TIMEOUT_SHIFT (1 << 0) +#define OMAP4430_TIMEOUT_MASK BITFIELD(0, 15) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_TIMEOUTEN_SHIFT (1 << 3) +#define OMAP4430_TIMEOUTEN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_TRANSITION_EN_SHIFT (1 << 8) +#define OMAP4430_TRANSITION_EN_MASK BITFIELD(8, 8) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_TRANSITION_ST_SHIFT (1 << 8) +#define OMAP4430_TRANSITION_ST_MASK BITFIELD(8, 8) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_VALID_SHIFT (1 << 24) +#define OMAP4430_VALID_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_BYPASSACK_EN_SHIFT (1 << 14) +#define OMAP4430_VC_BYPASSACK_EN_MASK BITFIELD(14, 14) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_BYPASSACK_ST_SHIFT (1 << 14) +#define OMAP4430_VC_BYPASSACK_ST_MASK BITFIELD(14, 14) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_IVA_VPACK_EN_SHIFT (1 << 30) +#define OMAP4430_VC_IVA_VPACK_EN_MASK BITFIELD(30, 30) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_IVA_VPACK_ST_SHIFT (1 << 30) +#define OMAP4430_VC_IVA_VPACK_ST_MASK BITFIELD(30, 30) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VC_MPU_VPACK_EN_SHIFT (1 << 6) +#define OMAP4430_VC_MPU_VPACK_EN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VC_MPU_VPACK_ST_SHIFT (1 << 6) +#define OMAP4430_VC_MPU_VPACK_ST_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_RAERR_EN_SHIFT (1 << 12) +#define OMAP4430_VC_RAERR_EN_MASK BITFIELD(12, 12) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_RAERR_ST_SHIFT (1 << 12) +#define OMAP4430_VC_RAERR_ST_MASK BITFIELD(12, 12) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_SAERR_EN_SHIFT (1 << 11) +#define OMAP4430_VC_SAERR_EN_MASK BITFIELD(11, 11) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_SAERR_ST_SHIFT (1 << 11) +#define OMAP4430_VC_SAERR_ST_MASK BITFIELD(11, 11) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_TOERR_EN_SHIFT (1 << 13) +#define OMAP4430_VC_TOERR_EN_MASK BITFIELD(13, 13) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_TOERR_ST_SHIFT (1 << 13) +#define OMAP4430_VC_TOERR_ST_MASK BITFIELD(13, 13) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_VDDMAX_SHIFT (1 << 24) +#define OMAP4430_VDDMAX_MASK BITFIELD(24, 31) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_VDDMIN_SHIFT (1 << 16) +#define OMAP4430_VDDMIN_MASK BITFIELD(16, 23) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT (1 << 12) +#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK BITFIELD(12, 12) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT (1 << 8) +#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK BITFIELD(8, 8) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT (1 << 14) +#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK BITFIELD(14, 14) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_IVA_PRESENCE_SHIFT (1 << 9) +#define OMAP4430_VDD_IVA_PRESENCE_MASK BITFIELD(9, 9) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT (1 << 7) +#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK BITFIELD(7, 7) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT (1 << 13) +#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK BITFIELD(13, 13) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_MPU_PRESENCE_SHIFT (1 << 8) +#define OMAP4430_VDD_MPU_PRESENCE_MASK BITFIELD(8, 8) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT (1 << 6) +#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK BITFIELD(6, 6) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_VOLRA_VDD_CORE_L_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_VOLRA_VDD_IVA_L_MASK BITFIELD(8, 15) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_VOLRA_VDD_MPU_L_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_VPENABLE_SHIFT (1 << 0) +#define OMAP4430_VPENABLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */ +#define OMAP4430_VPINIDLE_SHIFT (1 << 0) +#define OMAP4430_VPINIDLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */ +#define OMAP4430_VPVOLTAGE_SHIFT (1 << 0) +#define OMAP4430_VPVOLTAGE_MASK BITFIELD(0, 7) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT (1 << 20) +#define OMAP4430_VP_CORE_EQVALUE_EN_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT (1 << 20) +#define OMAP4430_VP_CORE_EQVALUE_ST_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT (1 << 18) +#define OMAP4430_VP_CORE_MAXVDD_EN_MASK BITFIELD(18, 18) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT (1 << 18) +#define OMAP4430_VP_CORE_MAXVDD_ST_MASK BITFIELD(18, 18) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT (1 << 17) +#define OMAP4430_VP_CORE_MINVDD_EN_MASK BITFIELD(17, 17) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT (1 << 17) +#define OMAP4430_VP_CORE_MINVDD_ST_MASK BITFIELD(17, 17) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT (1 << 19) +#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK BITFIELD(19, 19) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT (1 << 19) +#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK BITFIELD(19, 19) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT (1 << 16) +#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK BITFIELD(16, 16) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT (1 << 16) +#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK BITFIELD(16, 16) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT (1 << 21) +#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK BITFIELD(21, 21) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT (1 << 21) +#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK BITFIELD(21, 21) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT (1 << 28) +#define OMAP4430_VP_IVA_EQVALUE_EN_MASK BITFIELD(28, 28) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT (1 << 28) +#define OMAP4430_VP_IVA_EQVALUE_ST_MASK BITFIELD(28, 28) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT (1 << 26) +#define OMAP4430_VP_IVA_MAXVDD_EN_MASK BITFIELD(26, 26) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT (1 << 26) +#define OMAP4430_VP_IVA_MAXVDD_ST_MASK BITFIELD(26, 26) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT (1 << 25) +#define OMAP4430_VP_IVA_MINVDD_EN_MASK BITFIELD(25, 25) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT (1 << 25) +#define OMAP4430_VP_IVA_MINVDD_ST_MASK BITFIELD(25, 25) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT (1 << 27) +#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK BITFIELD(27, 27) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT (1 << 27) +#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK BITFIELD(27, 27) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT (1 << 24) +#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT (1 << 24) +#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT (1 << 29) +#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK BITFIELD(29, 29) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT (1 << 29) +#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK BITFIELD(29, 29) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT (1 << 4) +#define OMAP4430_VP_MPU_EQVALUE_EN_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT (1 << 4) +#define OMAP4430_VP_MPU_EQVALUE_ST_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT (1 << 2) +#define OMAP4430_VP_MPU_MAXVDD_EN_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT (1 << 2) +#define OMAP4430_VP_MPU_MAXVDD_ST_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT (1 << 1) +#define OMAP4430_VP_MPU_MINVDD_EN_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT (1 << 1) +#define OMAP4430_VP_MPU_MINVDD_ST_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT (1 << 3) +#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT (1 << 3) +#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT (1 << 0) +#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT (1 << 0) +#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT (1 << 5) +#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT (1 << 5) +#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK BITFIELD(5, 5) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_VSETUPCNT_VALUE_SHIFT (1 << 8) +#define OMAP4430_VSETUPCNT_VALUE_MASK BITFIELD(8, 15) + +/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ +#define OMAP4430_VSTEPMAX_SHIFT (1 << 0) +#define OMAP4430_VSTEPMAX_MASK BITFIELD(0, 7) + +/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ +#define OMAP4430_VSTEPMIN_SHIFT (1 << 0) +#define OMAP4430_VSTEPMIN_MASK BITFIELD(0, 7) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_WAKE_MODEM_SHIFT (1 << 0) +#define OMAP4430_WAKE_MODEM_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DISPC_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_DMTIMER10_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER11_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER11_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER2_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER3_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER3_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER4_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER4_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER9_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER9_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT (1 << 5) +#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK BITFIELD(5, 5) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT (1 << 4) +#define OMAP4430_WKUPDEP_DSI1_MPU_MASK BITFIELD(4, 4) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT (1 << 9) +#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK BITFIELD(9, 9) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT (1 << 8) +#define OMAP4430_WKUPDEP_DSI2_MPU_MASK BITFIELD(8, 8) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT (1 << 11) +#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK BITFIELD(11, 11) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT (1 << 10) +#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK BITFIELD(10, 10) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO3_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO3_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO4_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO4_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO5_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO5_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO6_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO6_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT (1 << 19) +#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK BITFIELD(19, 19) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT (1 << 13) +#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK BITFIELD(13, 13) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT (1 << 12) +#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK BITFIELD(12, 12) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT (1 << 14) +#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK BITFIELD(14, 14) + +/* Used by PM_L4PER_HECC1_WKDEP */ +#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HECC1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_HECC2_WKDEP */ +#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HECC2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C5_WKDEP */ +#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C5_WKDEP */ +#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_KEYBOARD_WKDEP */ +#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI3_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI3_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI4_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI4_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC6_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_PCIESS_WKDEP */ +#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_PCIESS_WKDEP */ +#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_WKUP_RTC_WKDEP */ +#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_RTC_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_SATA_WKDEP */ +#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SATA_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_SATA_WKDEP */ +#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SATA_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ALWON_SR_CORE_WKDEP */ +#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_ALWON_SR_CORE_WKDEP */ +#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ALWON_SR_IVA_WKDEP */ +#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_ALWON_SR_IVA_WKDEP */ +#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ALWON_SR_MPU_WKDEP */ +#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_TIMER12_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_TIMER1_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER5_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER5_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER6_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER6_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER7_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER7_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER8_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER8_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_UART1_WKDEP */ +#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART1_WKDEP */ +#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART2_WKDEP */ +#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART2_WKDEP */ +#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_UART3_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_UART4_WKDEP */ +#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART4_WKDEP */ +#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_UNIPRO1_WKDEP */ +#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_UNIPRO1_WKDEP */ +#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_HOST_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_HOST_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_OTG_WKDEP */ +#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_OTG_WKDEP */ +#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_TLL_WKDEP */ +#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_TLL_WKDEP */ +#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_USIM_WKDEP */ +#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USIM_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_USIM_WKDEP */ +#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_USIM_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_WKUP_WDT2_WKDEP */ +#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_WKUP_WDT2_WKDEP */ +#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_WDT2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_WDT3_WKDEP */ +#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_WDT3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT (1 << 8) +#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK BITFIELD(8, 8) + +/* Used by PM_L3INIT_XHPI_WKDEP */ +#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_WUCLK_CTRL_SHIFT (1 << 8) +#define OMAP4430_WUCLK_CTRL_MASK BITFIELD(8, 8) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_WUCLK_STATUS_SHIFT (1 << 9) +#define OMAP4430_WUCLK_STATUS_MASK BITFIELD(9, 9) +#endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index a117f853ea39..ea050ce188a7 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -4,8 +4,8 @@ /* * OMAP2/3 Power/Reset Management (PRM) register definitions * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation * * Written by Paul Walmsley * @@ -22,6 +22,10 @@ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) +#define OMAP44XX_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg)) + +#include "prm44xx.h" /* * Architecture-specific global PRM registers diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h new file mode 100644 index 000000000000..89be97f0589d --- /dev/null +++ b/arch/arm/mach-omap2/prm44xx.h @@ -0,0 +1,411 @@ +/* + * OMAP44xx PRM instance offset macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H + + +/* PRM */ + + +/* PRM.OCP_SOCKET_PRM register offsets */ +#define OMAP4430_REVISION_PRM OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_PRM_IRQSTATUS_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010) +#define OMAP4430_PRM_IRQSTATUS_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014) +#define OMAP4430_PRM_IRQENABLE_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018) +#define OMAP4430_PRM_IRQENABLE_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c) +#define OMAP4430_PRM_IRQSTATUS_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020) +#define OMAP4430_PRM_IRQENABLE_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028) +#define OMAP4430_PRM_IRQSTATUS_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030) +#define OMAP4430_PRM_IRQENABLE_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038) +#define OMAP4430_PRM_PRM_PROFILING_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040) + +/* PRM.CKGEN_PRM register offsets */ +#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_DPLL_SYS_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004) +#define OMAP4430_CM_L4_WKUP_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_ABE_PLL_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c) +#define OMAP4430_CM_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010) + +/* PRM.MPU_PRM register offsets */ +#define OMAP4430_PM_MPU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000) +#define OMAP4430_PM_MPU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004) +#define OMAP4430_RM_MPU_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014) +#define OMAP4430_RM_MPU_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024) + +/* PRM.TESLA_PRM register offsets */ +#define OMAP4430_PM_TESLA_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000) +#define OMAP4430_PM_TESLA_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004) +#define OMAP4430_RM_TESLA_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010) +#define OMAP4430_RM_TESLA_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014) +#define OMAP4430_RM_TESLA_TESLA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024) + +/* PRM.ABE_PRM register offsets */ +#define OMAP4430_PM_ABE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000) +#define OMAP4430_PM_ABE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004) +#define OMAP4430_RM_ABE_AESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c) +#define OMAP4430_PM_ABE_PDM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030) +#define OMAP4430_RM_ABE_PDM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034) +#define OMAP4430_PM_ABE_DMIC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038) +#define OMAP4430_RM_ABE_DMIC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c) +#define OMAP4430_PM_ABE_MCASP_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040) +#define OMAP4430_RM_ABE_MCASP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044) +#define OMAP4430_PM_ABE_MCBSP1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048) +#define OMAP4430_RM_ABE_MCBSP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c) +#define OMAP4430_PM_ABE_MCBSP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050) +#define OMAP4430_RM_ABE_MCBSP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054) +#define OMAP4430_PM_ABE_MCBSP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058) +#define OMAP4430_RM_ABE_MCBSP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c) +#define OMAP4430_PM_ABE_SLIMBUS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060) +#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064) +#define OMAP4430_PM_ABE_TIMER5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068) +#define OMAP4430_RM_ABE_TIMER5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c) +#define OMAP4430_PM_ABE_TIMER6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070) +#define OMAP4430_RM_ABE_TIMER6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074) +#define OMAP4430_PM_ABE_TIMER7_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078) +#define OMAP4430_RM_ABE_TIMER7_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c) +#define OMAP4430_PM_ABE_TIMER8_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080) +#define OMAP4430_RM_ABE_TIMER8_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084) +#define OMAP4430_PM_ABE_WDT3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088) +#define OMAP4430_RM_ABE_WDT3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c) + +/* PRM.ALWAYS_ON_PRM register offsets */ +#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024) +#define OMAP4430_PM_ALWON_SR_MPU_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028) +#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c) +#define OMAP4430_PM_ALWON_SR_IVA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030) +#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034) +#define OMAP4430_PM_ALWON_SR_CORE_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038) +#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c) + +/* PRM.CORE_PRM register offsets */ +#define OMAP4430_PM_CORE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000) +#define OMAP4430_PM_CORE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004) +#define OMAP4430_RM_L3_1_L3_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024) +#define OMAP4430_RM_L3_2_L3_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124) +#define OMAP4430_RM_L3_2_GPMC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c) +#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134) +#define OMAP4430_RM_DUCATI_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210) +#define OMAP4430_RM_DUCATI_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214) +#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224) +#define OMAP4430_RM_SDMA_SDMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324) +#define OMAP4430_RM_MEMIF_DMM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424) +#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c) +#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434) +#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c) +#define OMAP4430_RM_MEMIF_DLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444) +#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454) +#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c) +#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464) +#define OMAP4430_RM_D2D_SAD2D_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524) +#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c) +#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534) +#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624) +#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c) +#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634) +#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c) +#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724) +#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c) +#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744) + +/* PRM.IVAHD_PRM register offsets */ +#define OMAP4430_PM_IVAHD_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000) +#define OMAP4430_PM_IVAHD_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004) +#define OMAP4430_RM_IVAHD_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010) +#define OMAP4430_RM_IVAHD_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014) +#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024) +#define OMAP4430_RM_IVAHD_SL2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c) + +/* PRM.CAM_PRM register offsets */ +#define OMAP4430_PM_CAM_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000) +#define OMAP4430_PM_CAM_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004) +#define OMAP4430_RM_CAM_ISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024) +#define OMAP4430_RM_CAM_FDIF_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c) + +/* PRM.DSS_PRM register offsets */ +#define OMAP4430_PM_DSS_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000) +#define OMAP4430_PM_DSS_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004) +#define OMAP4430_PM_DSS_DSS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020) +#define OMAP4430_RM_DSS_DSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024) +#define OMAP4430_RM_DSS_DEISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c) + +/* PRM.GFX_PRM register offsets */ +#define OMAP4430_PM_GFX_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000) +#define OMAP4430_PM_GFX_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004) +#define OMAP4430_RM_GFX_GFX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024) + +/* PRM.L3INIT_PRM register offsets */ +#define OMAP4430_PM_L3INIT_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000) +#define OMAP4430_PM_L3INIT_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004) +#define OMAP4430_PM_L3INIT_MMC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028) +#define OMAP4430_RM_L3INIT_MMC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c) +#define OMAP4430_PM_L3INIT_MMC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030) +#define OMAP4430_RM_L3INIT_MMC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034) +#define OMAP4430_PM_L3INIT_HSI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038) +#define OMAP4430_RM_L3INIT_HSI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c) +#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040) +#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044) +#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058) +#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c) +#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060) +#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064) +#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068) +#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c) +#define OMAP4430_RM_L3INIT_P1500_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c) +#define OMAP4430_RM_L3INIT_EMAC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084) +#define OMAP4430_PM_L3INIT_SATA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088) +#define OMAP4430_RM_L3INIT_SATA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c) +#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094) +#define OMAP4430_PM_L3INIT_PCIESS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098) +#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c) +#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac) +#define OMAP4430_PM_L3INIT_XHPI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0) +#define OMAP4430_RM_L3INIT_XHPI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4) +#define OMAP4430_PM_L3INIT_MMC6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8) +#define OMAP4430_RM_L3INIT_MMC6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc) +#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0) +#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4) +#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4) + +/* PRM.L4PER_PRM register offsets */ +#define OMAP4430_PM_L4PER_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000) +#define OMAP4430_PM_L4PER_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004) +#define OMAP4430_RM_L4PER_ADC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024) +#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028) +#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c) +#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030) +#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034) +#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038) +#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c) +#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040) +#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044) +#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048) +#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c) +#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050) +#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054) +#define OMAP4430_RM_L4PER_ELM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c) +#define OMAP4430_PM_L4PER_GPIO2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060) +#define OMAP4430_RM_L4PER_GPIO2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064) +#define OMAP4430_PM_L4PER_GPIO3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068) +#define OMAP4430_RM_L4PER_GPIO3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c) +#define OMAP4430_PM_L4PER_GPIO4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070) +#define OMAP4430_RM_L4PER_GPIO4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074) +#define OMAP4430_PM_L4PER_GPIO5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078) +#define OMAP4430_RM_L4PER_GPIO5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c) +#define OMAP4430_PM_L4PER_GPIO6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080) +#define OMAP4430_RM_L4PER_GPIO6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084) +#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c) +#define OMAP4430_PM_L4PER_HECC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090) +#define OMAP4430_RM_L4PER_HECC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094) +#define OMAP4430_PM_L4PER_HECC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098) +#define OMAP4430_RM_L4PER_HECC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c) +#define OMAP4430_PM_L4PER_I2C1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0) +#define OMAP4430_RM_L4PER_I2C1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4) +#define OMAP4430_PM_L4PER_I2C2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8) +#define OMAP4430_RM_L4PER_I2C2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac) +#define OMAP4430_PM_L4PER_I2C3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0) +#define OMAP4430_RM_L4PER_I2C3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4) +#define OMAP4430_PM_L4PER_I2C4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8) +#define OMAP4430_RM_L4PER_I2C4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc) +#define OMAP4430_RM_L4PER_L4_PER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0) +#define OMAP4430_PM_L4PER_MCASP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0) +#define OMAP4430_RM_L4PER_MCASP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4) +#define OMAP4430_PM_L4PER_MCASP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8) +#define OMAP4430_RM_L4PER_MCASP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc) +#define OMAP4430_PM_L4PER_MCBSP4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0) +#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4) +#define OMAP4430_RM_L4PER_MGATE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec) +#define OMAP4430_PM_L4PER_MCSPI1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0) +#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4) +#define OMAP4430_PM_L4PER_MCSPI2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8) +#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc) +#define OMAP4430_PM_L4PER_MCSPI3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100) +#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104) +#define OMAP4430_PM_L4PER_MCSPI4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108) +#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c) +#define OMAP4430_PM_L4PER_MMCSD3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120) +#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124) +#define OMAP4430_PM_L4PER_MMCSD4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128) +#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c) +#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134) +#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138) +#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c) +#define OMAP4430_PM_L4PER_UART1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140) +#define OMAP4430_RM_L4PER_UART1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144) +#define OMAP4430_PM_L4PER_UART2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148) +#define OMAP4430_RM_L4PER_UART2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c) +#define OMAP4430_PM_L4PER_UART3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150) +#define OMAP4430_RM_L4PER_UART3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154) +#define OMAP4430_PM_L4PER_UART4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158) +#define OMAP4430_RM_L4PER_UART4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c) +#define OMAP4430_PM_L4PER_MMCSD5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160) +#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164) +#define OMAP4430_PM_L4PER_I2C5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168) +#define OMAP4430_RM_L4PER_I2C5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c) +#define OMAP4430_RM_L4SEC_AES1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4) +#define OMAP4430_RM_L4SEC_AES2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac) +#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4) +#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc) +#define OMAP4430_RM_L4SEC_RNG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4) +#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc) +#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc) + +/* PRM.CEFUSE_PRM register offsets */ +#define OMAP4430_PM_CEFUSE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000) +#define OMAP4430_PM_CEFUSE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004) +#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024) + +/* PRM.WKUP_PRM register offsets */ +#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024) +#define OMAP4430_RM_WKUP_WDT1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c) +#define OMAP4430_PM_WKUP_WDT2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030) +#define OMAP4430_RM_WKUP_WDT2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034) +#define OMAP4430_PM_WKUP_GPIO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038) +#define OMAP4430_RM_WKUP_GPIO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c) +#define OMAP4430_PM_WKUP_TIMER1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040) +#define OMAP4430_RM_WKUP_TIMER1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044) +#define OMAP4430_PM_WKUP_TIMER12_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048) +#define OMAP4430_RM_WKUP_TIMER12_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c) +#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054) +#define OMAP4430_PM_WKUP_USIM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058) +#define OMAP4430_RM_WKUP_USIM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c) +#define OMAP4430_RM_WKUP_SARRAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064) +#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078) +#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c) +#define OMAP4430_PM_WKUP_RTC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080) +#define OMAP4430_RM_WKUP_RTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084) + +/* PRM.WKUP_CM register offsets */ +#define OMAP4430_CM_WKUP_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000) +#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020) +#define OMAP4430_CM_WKUP_WDT1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028) +#define OMAP4430_CM_WKUP_WDT2_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030) +#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038) +#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040) +#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048) +#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050) +#define OMAP4430_CM_WKUP_USIM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058) +#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060) +#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078) +#define OMAP4430_CM_WKUP_RTC_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080) +#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088) + +/* PRM.EMU_PRM register offsets */ +#define OMAP4430_PM_EMU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000) +#define OMAP4430_PM_EMU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004) +#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024) + +/* PRM.EMU_CM register offsets */ +#define OMAP4430_CM_EMU_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000) +#define OMAP4430_CM_EMU_DYNAMICDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008) +#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020) + +/* PRM.DEVICE_PRM register offsets */ +#define OMAP4430_PRM_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000) +#define OMAP4430_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004) +#define OMAP4430_PRM_RSTTIME OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008) +#define OMAP4430_PRM_CLKREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c) +#define OMAP4430_PRM_VOLTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010) +#define OMAP4430_PRM_PWRREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014) +#define OMAP4430_PRM_PSCON_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018) +#define OMAP4430_PRM_IO_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c) +#define OMAP4430_PRM_IO_PMCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020) +#define OMAP4430_PRM_VOLTSETUP_WARMRESET OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024) +#define OMAP4430_PRM_VOLTSETUP_CORE_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028) +#define OMAP4430_PRM_VOLTSETUP_MPU_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c) +#define OMAP4430_PRM_VOLTSETUP_IVA_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030) +#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034) +#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038) +#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c) +#define OMAP4430_PRM_VP_CORE_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040) +#define OMAP4430_PRM_VP_CORE_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044) +#define OMAP4430_PRM_VP_CORE_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048) +#define OMAP4430_PRM_VP_CORE_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c) +#define OMAP4430_PRM_VP_CORE_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050) +#define OMAP4430_PRM_VP_CORE_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054) +#define OMAP4430_PRM_VP_MPU_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058) +#define OMAP4430_PRM_VP_MPU_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c) +#define OMAP4430_PRM_VP_MPU_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060) +#define OMAP4430_PRM_VP_MPU_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064) +#define OMAP4430_PRM_VP_MPU_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068) +#define OMAP4430_PRM_VP_MPU_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c) +#define OMAP4430_PRM_VP_IVA_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070) +#define OMAP4430_PRM_VP_IVA_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074) +#define OMAP4430_PRM_VP_IVA_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078) +#define OMAP4430_PRM_VP_IVA_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c) +#define OMAP4430_PRM_VP_IVA_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080) +#define OMAP4430_PRM_VP_IVA_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084) +#define OMAP4430_PRM_VC_SMPS_SA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088) +#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c) +#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c) +#define OMAP4430_PRM_VC_VAL_BYPASS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0) +#define OMAP4430_PRM_VC_CFG_CHANNEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4) +#define OMAP4430_PRM_VC_CFG_I2C_MODE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8) +#define OMAP4430_PRM_VC_CFG_I2C_CLK OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac) +#define OMAP4430_PRM_SRAM_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0) +#define OMAP4430_PRM_SRAM_WKUP_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4) +#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8) +#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc) +#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0) +#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4) +#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8) +#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc) +#define OMAP4430_PRM_LDO_ABB_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0) +#define OMAP4430_PRM_LDO_ABB_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4) +#define OMAP4430_PRM_LDO_ABB_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8) +#define OMAP4430_PRM_LDO_ABB_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc) +#define OMAP4430_PRM_LDO_BANDGAP_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0) +#define OMAP4430_PRM_DEVICE_OFF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4) +#define OMAP4430_PRM_PHASE1_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8) +#define OMAP4430_PRM_PHASE2A_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec) +#define OMAP4430_PRM_PHASE2B_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0) +#define OMAP4430_PRM_MODEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4) + +/* CHIRON_PRCM */ + + +/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */ +#define OMAP4430_REVISION_PRCM OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000) + +/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */ +#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000) + +/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */ +#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000) +#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004) +#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008) +#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c) +#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010) +#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014) +#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018) + +/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */ +#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000) +#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004) +#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008) +#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c) +#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010) +#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014) +#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018) +#endif diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 9a592199321c..cbfbd142e946 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -160,3 +160,19 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } + +void omap2_sms_write_rot_control(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_CONTROL(ctx)); +} + +void omap2_sms_write_rot_size(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_SIZE(ctx)); +} + +void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); +} + diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 48207b018989..68f57bb67fc5 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -18,6 +18,9 @@ #include <plat/sdrc.h> #ifndef __ASSEMBLER__ + +#include <linux/io.h> + extern void __iomem *omap2_sdrc_base; extern void __iomem *omap2_sms_base; @@ -56,4 +59,20 @@ static inline u32 sms_read_reg(u16 reg) OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) #endif /* __ASSEMBLER__ */ +/* Minimum frequency that the SDRC DLL can lock at */ +#define MIN_SDRC_DLL_LOCK_FREQ 83000000 + +/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */ +#define SDRC_MPURATE_SCALE 8 + +/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */ +#define SDRC_MPURATE_BASE_SHIFT 9 + +/* + * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at + * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize + */ +#define SDRC_MPURATE_LOOPS 96 + + #endif diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 2e17b57f5b23..39b797bc14d6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -33,6 +33,7 @@ #include "pm.h" #include "prm-regbits-34xx.h" +#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ #define DEFAULT_TIMEOUT (5 * HZ) @@ -572,6 +573,23 @@ static struct omap_uart_state omap_uart[] = { #endif }; +/* + * Override the default 8250 read handler: mem_serial_in() + * Empty RX fifo read causes an abort on omap3630 and omap4 + * This function makes sure that an empty rx fifo is not read on these silicons + * (OMAP1/2/3430 are not affected) + */ +static unsigned int serial_in_override(struct uart_port *up, int offset) +{ + if (UART_RX == offset) { + unsigned int lsr; + lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR); + if (!(lsr & UART_LSR_DR)) + return -EPERM; + } + return serial_read_reg(omap_uart[up->line].p, offset); +} + void __init omap_serial_early_init(void) { int i; @@ -631,24 +649,64 @@ void __init omap_serial_early_init(void) } } -void __init omap_serial_init(void) +/** + * omap_serial_init_port() - initialize single serial port + * @port: serial port number (0-3) + * + * This function initialies serial driver for given @port only. + * Platforms can call this function instead of omap_serial_init() + * if they don't plan to use all available UARTs as serial ports. + * + * Don't mix calls to omap_serial_init_port() and omap_serial_init(), + * use only one of the two. + */ +void __init omap_serial_init_port(int port) { - int i; + struct omap_uart_state *uart; + struct platform_device *pdev; + struct device *dev; - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { - struct omap_uart_state *uart = &omap_uart[i]; - struct platform_device *pdev = &uart->pdev; - struct device *dev = &pdev->dev; + BUG_ON(port < 0); + BUG_ON(port >= ARRAY_SIZE(omap_uart)); - omap_uart_reset(uart); - omap_uart_idle_init(uart); + uart = &omap_uart[port]; + pdev = &uart->pdev; + dev = &pdev->dev; - if (WARN_ON(platform_device_register(pdev))) - continue; - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(dev, true); - DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); - } + omap_uart_reset(uart); + omap_uart_idle_init(uart); + + if (WARN_ON(platform_device_register(pdev))) + return; + + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); } + + /* omap44xx: Never read empty UART fifo + * omap3xxx: Never read empty UART fifo on UARTs + * with IP rev >=0x52 + */ + if (cpu_is_omap44xx()) + uart->p->serial_in = serial_in_override; + else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) + uart->p->serial_in = serial_in_override; +} + +/** + * omap_serial_init() - intialize all supported serial ports + * + * Initializes all available UARTs as serial ports. Platforms + * can call this function when they want to have default behaviour + * for serial ports (e.g initialize them all as serial ports). + */ +void __init omap_serial_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(omap_uart); i++) + omap_serial_init_port(i); } diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 82aa4a3d160c..de99ba2a57ab 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -91,8 +91,19 @@ * new SDRC_ACTIM_CTRL_B_1 register contents * new SDRC_MR_1 register value * - * If the param SDRC_RFR_CTRL_1 is 0, the parameters - * are not programmed into the SDRC CS1 registers + * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into + * the SDRC CS1 registers + * + * NOTE: This code no longer attempts to program the SDRC AC timing and MR + * registers. This is because the code currently cannot ensure that all + * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the + * SDRAM when the registers are written. If the registers are changed while + * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC + * may enter an unpredictable state. In the future, the intent is to + * re-enable this code in cases where we can ensure that no initiators are + * touching the SDRAM. Until that time, users who know that their use case + * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING + * option. */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack @@ -219,6 +230,7 @@ configure_sdrc: ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM str r12, [r11] @ store +#ifdef CONFIG_OMAP3_SDRC_AC_TIMING ldr r12, omap_sdrc_actim_ctrl_a_0_val ldr r11, omap3_sdrc_actim_ctrl_a_0 str r12, [r11] @@ -228,11 +240,13 @@ configure_sdrc: ldr r12, omap_sdrc_mr_0_val ldr r11, omap3_sdrc_mr_0 str r12, [r11] +#endif ldr r12, omap_sdrc_rfr_ctrl_1_val cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, beq skip_cs1_prog @ do not program cs1 params ldr r11, omap3_sdrc_rfr_ctrl_1 str r12, [r11] +#ifdef CONFIG_OMAP3_SDRC_AC_TIMING ldr r12, omap_sdrc_actim_ctrl_a_1_val ldr r11, omap3_sdrc_actim_ctrl_a_1 str r12, [r11] @@ -242,6 +256,7 @@ configure_sdrc: ldr r12, omap_sdrc_mr_1_val ldr r11, omap3_sdrc_mr_1 str r12, [r11] +#endif skip_cs1_prog: ldr r12, [r11] @ posted-write barrier for SDRC bx lr diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index e448abd5ec5d..f1df873d59db 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -27,6 +27,8 @@ #include <mach/irqs.h> #include <plat/usb.h> +#include "mux.h" + #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) static struct resource ehci_resources[] = { @@ -72,32 +74,44 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) { switch (port_mode[0]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); - omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); - omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); - omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); - omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); - omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); - omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); - omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); - omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); + omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); - omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); - omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); - omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); - omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); - omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); - omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); - omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); - omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); + omap_mux_init_signal("hsusb1_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb1_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -107,32 +121,52 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) switch (port_mode[1]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); - omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); - omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); - omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); - omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); - omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); - omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); - omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); - omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); - omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); - omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); + omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); - omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); - omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); - omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); - omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); - omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); - omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); - omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); - omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); - omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); - omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); + omap_mux_init_signal("hsusb2_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb2_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -145,18 +179,30 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); - omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); - omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); - omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); - omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); - omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); - omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); - omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); - omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); - omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); - omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); - omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); + omap_mux_init_signal("hsusb3_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb3_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 36dc5413cc97..bdf96eb523bc 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) writel(win_enable, PCI_BAR_ENABLE); /* - * Disable automatic update of address remaping when writing to BARs. + * Disable automatic update of address remapping when writing to BARs. */ orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1); } diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 8721b8010221..ae536e86d8e8 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -91,7 +91,7 @@ /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknown */ #define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ #define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ #define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index d15662aba008..6baf7469d4ec 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -66,7 +66,7 @@ /* BATTERY */ #define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknown */ #define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ #define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ #define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 3dc9b074ab46..3f9dd3fd4638 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -68,7 +68,7 @@ /* BATTERY */ #define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ #define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ -#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTC_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTC_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTC_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTC_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h index 12361341f9d8..f89e989a7637 100644 --- a/arch/arm/mach-pxa/include/mach/palmte2.h +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -59,7 +59,7 @@ /* BATTERY */ #define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1be0db6ed55e..10abc4f2e8e4 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -94,7 +94,7 @@ /* BATTERY */ #define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTX_BAT_MAX_CURRENT 0 /* unknown */ #define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ #define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ #define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2806ef69ba5a..2bbcf70dd935 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -49,7 +49,7 @@ /* Battery */ #define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ #define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMZ72_BAT_MAX_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */ #define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */ #define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */ diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig index deab0722836e..fdd8f5e96faf 100644 --- a/arch/arm/mach-s3c2400/Kconfig +++ b/arch/arm/mach-s3c2400/Kconfig @@ -1,13 +1,7 @@ -# arch/arm/mach-s3c2400/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 - - menu "S3C2400 Machines" - endmenu - diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index dd1fcc7e6708..554731868b07 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2410/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c2bdc4635d12..9a8c0657ae50 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2412/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 @@ -90,6 +88,4 @@ config MACH_VSTMS help Say Y here if you are using an VSTMS board - endmenu - diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index cf10e14b7b49..80879358eb2f 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2440/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 @@ -122,4 +120,3 @@ config MACH_MINI2440 available via various sources. It can come with a 3.5" or 7" touch LCD. endmenu - diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig index 103e913f2258..8d3811852fc7 100644 --- a/arch/arm/mach-s3c2442/Kconfig +++ b/arch/arm/mach-s3c2442/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2442/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 @@ -36,6 +34,4 @@ config MACH_NEO1973_GTA02 help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone - endmenu - diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 212141baebec..4314c4424909 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c2443/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig index 770b72067e3d..a250bf68709f 100644 --- a/arch/arm/mach-s3c6400/Kconfig +++ b/arch/arm/mach-s3c6400/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c6400/Kconfig -# # Copyright 2008 Openmoko, Inc. # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> # diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c index b93dafbee1f4..1039937403be 100644 --- a/arch/arm/mach-s3c6400/setup-sdhci.c +++ b/arch/arm/mach-s3c6400/setup-sdhci.c @@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index 72d4b11b2077..162f4561f80f 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s3c6410/Kconfig -# # Copyright 2008 Openmoko, Inc. # Copyright 2008 Simtec Electronics # diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c index 20666f3bd478..816d2d9f9ef8 100644 --- a/arch/arm/mach-s3c6410/setup-sdhci.c +++ b/arch/arm/mach-s3c6410/setup-sdhci.c @@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 0dd2b8c6eabe..27ec167d2808 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/mach-s5pc100/Kconfig -# # Copyright 2009 Samsung Electronics Co. # Byungho Min <bhmin@samsung.com> # diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c index cb4521a6f42d..ad660350c296 100644 --- a/arch/arm/mach-sa1100/dma.c +++ b/arch/arm/mach-sa1100/dma.c @@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) /** - * sa1100_request_dma - allocate one of the SA11x0's DMA chanels + * sa1100_request_dma - allocate one of the SA11x0's DMA channels * @device: The SA11x0 peripheral targeted by this request * @device_id: An ascii name for the claiming device * @callback: Function to be called when the DMA completes diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 88333dfb19fc..56721a0cd2af 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -6,7 +6,7 @@ * Copyright (C) 2006-2009 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * Basic register address definitions in physical memory and - * some block defintions for core devices like the timer. + * some block definitions for core devices like the timer. * Author: Linus Walleij <linus.walleij@stericsson.com> */ diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 2b7996401b0f..f5abc51c5a07 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -54,7 +54,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, * We enforce the MAP_FIXED case. */ if (flags & MAP_FIXED) { - if (aliasing && flags & MAP_SHARED && addr & (SHMLBA - 1)) + if (aliasing && flags & MAP_SHARED && + (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) return -EINVAL; return addr; } diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 4cbca9da1505..996cbac6932c 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o +obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c new file mode 100644 index 000000000000..41599be882e8 --- /dev/null +++ b/arch/arm/plat-mxc/ehci.c @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc_ehci.h> + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX31_OTG_SIC_SHIFT 29 +#define MX31_OTG_SIC_MASK (0xf << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_PM_BIT (1 << 24) + +#define MX31_H2_SIC_SHIFT 21 +#define MX31_H2_SIC_MASK (0xf << MX31_H2_SIC_SHIFT) +#define MX31_H2_PM_BIT (1 << 16) +#define MX31_H2_DT_BIT (1 << 5) + +#define MX31_H1_SIC_SHIFT 13 +#define MX31_H1_SIC_MASK (0xf << MX31_H1_SIC_SHIFT) +#define MX31_H1_PM_BIT (1 << 8) +#define MX31_H1_DT_BIT (1 << 4) + +int mxc_set_usbcontrol(int port, unsigned int flags) +{ + unsigned int v; + + if (cpu_is_mx31()) { + v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_OTG_SIC_SHIFT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MX31_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H1_SIC_SHIFT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H2_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + } + + writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } + + printk(KERN_WARNING + "%s() unable to setup USBCONTROL for this CPU\n", __func__); + return -EINVAL; +} +EXPORT_SYMBOL(mxc_set_usbcontrol); + diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index eaabd4e96925..e1fc6da1cd10 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -112,7 +112,7 @@ enum iomux_gp_func { * setups a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ int mxc_iomux_alloc_pin(const unsigned int pin, const char *label); /* diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h index 9f13061192c8..3887f3fe29d4 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -48,7 +48,7 @@ * setups a single pin: * - reserves the pin so that it is not claimed by another driver * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib + * - if the pin is configured as a GPIO, we claim it through kernel gpiolib */ int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label); /* diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h new file mode 100644 index 000000000000..8f796239393e --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -0,0 +1,37 @@ +#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H +#define __INCLUDE_ASM_ARCH_MXC_EHCI_H + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + +#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) +#define MXC_EHCI_TTL_ENABLED (1 << 6) + +struct mxc_usbh_platform_data { + int (*init)(struct platform_device *pdev); + int (*exit)(struct platform_device *pdev); + + unsigned int portsc; + unsigned int flags; + struct otg_transceiver *otg; +}; + +int mxc_set_usbcontrol(int port, unsigned int flags); + +#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ + diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 5cdbd605ac05..4ff6dfe04283 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) * register to follow the ratio of duty_ns vs. period_ns * accordingly. * - * This is good enought for programming the brightness of + * This is good enough for programming the brightness of * the LCD backlight. * * The real implementation would divide PERCLK[0] first by diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index f348ddfb0492..e2ea04a4c8a1 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -27,6 +27,7 @@ config ARCH_OMAP4 bool "TI OMAP4" select CPU_V7 select ARM_GIC + select COMMON_CLKDEV endchoice @@ -42,28 +43,6 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS || LEDS_OMAP_DEBUG -config OMAP_DEBUG_POWERDOMAIN - bool "Emit debug messages from powerdomain layer" - depends on ARCH_OMAP2 || ARCH_OMAP3 - help - Say Y here if you want to compile in powerdomain layer - debugging messages for OMAP2/3. These messages can - provide more detail as to why some powerdomain calls - may be failing, and will also emit a descriptive message - for every powerdomain register write. However, the - extra detail costs some memory. - -config OMAP_DEBUG_CLOCKDOMAIN - bool "Emit debug messages from clockdomain layer" - depends on ARCH_OMAP2 || ARCH_OMAP3 - help - Say Y here if you want to compile in clockdomain layer - debugging messages for OMAP2/3. These messages can - provide more detail as to why some clockdomain calls - may be failing, and will also emit a descriptive message - for every clockdomain register write. However, the - extra detail costs some memory. - config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_OMAP @@ -78,28 +57,28 @@ config OMAP_RESET_CLOCKS config OMAP_MUX bool "OMAP multiplexing support" - depends on ARCH_OMAP + depends on ARCH_OMAP default y - help - Pin multiplexing support for OMAP boards. If your bootloader - sets the multiplexing correctly, say N. Otherwise, or if unsure, - say Y. + help + Pin multiplexing support for OMAP boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. config OMAP_MUX_DEBUG bool "Multiplexing debug output" - depends on OMAP_MUX - help - Makes the multiplexing functions print out a lot of debug info. - This is useful if you want to find out the correct values of the - multiplexing registers. + depends on OMAP_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. config OMAP_MUX_WARNINGS bool "Warn about pins the bootloader didn't set up" - depends on OMAP_MUX - default y - help + depends on OMAP_MUX + default y + help Choose Y here to warn whenever driver initialization logic needs - to change the pin multiplexing setup. When there are no warnings + to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. config OMAP_MCBSP @@ -125,7 +104,7 @@ config OMAP_IOMMU_DEBUG tristate choice - prompt "System timer" + prompt "System timer" default OMAP_MPU_TIMER config OMAP_MPU_TIMER @@ -148,11 +127,11 @@ config OMAP_32K_TIMER endchoice config OMAP_32K_TIMER_HZ - int "Kernel internal timer frequency for 32KHz timer" - range 32 1024 - depends on OMAP_32K_TIMER - default "128" - help + int "Kernel internal timer frequency for 32KHz timer" + range 32 1024 + depends on OMAP_32K_TIMER + default "128" + help Kernel internal timer frequency should be a divisor of 32768, such as 64 or 128. diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 681bfc37ebb2..89cafc937249 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -40,36 +40,10 @@ static struct clk_functions *arch_clock; * clock framework is not up , it is defined here to avoid rework in * every driver. Also dummy prcm reset function is added */ -/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */ -#if defined(CONFIG_ARCH_OMAP4) -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -void omap2_clk_prepare_for_reboot(void) -{ -} -EXPORT_SYMBOL(omap2_clk_prepare_for_reboot); - -void omap_prcm_arch_reset(char mode) -{ -} -EXPORT_SYMBOL(omap_prcm_arch_reset); -#endif int clk_enable(struct clk *clk) { unsigned long flags; int ret = 0; - if (cpu_is_omap44xx()) - /* OMAP4 clk framework not supported yet */ - return 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index cc050b3313bd..bf1eaf3a27d4 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -280,16 +280,18 @@ void __init omap2_set_globals_343x(void) #if defined(CONFIG_ARCH_OMAP4) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), + .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), }; void __init omap2_set_globals_443x(void) { omap2_set_globals_tap(&omap4_globals); omap2_set_globals_control(&omap4_globals); + omap2_set_globals_prcm(&omap4_globals); } #endif diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 09c1107637f6..923c9621096b 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/smc91x.h> #include <mach/hardware.h> @@ -24,6 +25,12 @@ * platforms include H2, H3, H4, and Perseus2. */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -36,6 +43,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index f86617869b38..30b5db73017a 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -242,6 +242,39 @@ fail: /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + /* Numbering for the SPI-capable controllers when used for SPI: * spi = 1 * uwire = 2 @@ -324,39 +357,6 @@ static void omap_init_wdt(void) static inline void omap_init_wdt(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -384,9 +384,9 @@ static int __init omap_init_devices(void) */ omap_init_dsp(); omap_init_kp(); + omap_init_rng(); omap_init_uwire(); omap_init_wdt(); - omap_init_rng(); return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index be4ce070fb4c..09d82b3c66ce 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -47,7 +47,6 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 -#define OMAP_DMA_CCR_EN (1 << 7) #define OMAP2_DMA_CSR_CLEAR_MASK 0xffe #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -1120,17 +1119,8 @@ int omap_dma_running(void) { int lch; - /* - * On OMAP1510, internal LCD controller will start the transfer - * when it gets enabled, so assume DMA running if LCD enabled. - */ - if (cpu_is_omap1510()) - if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) - return 1; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + if (cpu_class_is_omap1()) + if (omap_lcd_dma_running()) return 1; for (lch = 0; lch < dma_chan_count; lch++) @@ -1252,7 +1242,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue) * OMAP_DMA_DYNAMIC_CHAIN * @params - Channel parameters * - * @return - Succes : 0 + * @return - Success : 0 * Failure: -EINVAL/-ENOMEM */ int omap_request_dma_chain(int dev_id, const char *dev_name, @@ -1990,377 +1980,6 @@ static struct irqaction omap24xx_dma_irq; /*----------------------------------------------------------------------------*/ -static struct lcd_dma_info { - spinlock_t lock; - int reserved; - void (*callback)(u16 status, void *data); - void *cb_data; - - int active; - unsigned long addr, size; - int rotate, data_type, xres, yres; - int vxres; - int mirror; - int xscale, yscale; - int ext_ctrl; - int src_port; - int single_transfer; -} lcd_dma; - -void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type) -{ - lcd_dma.addr = addr; - lcd_dma.data_type = data_type; - lcd_dma.xres = fb_xres; - lcd_dma.yres = fb_yres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1); - -void omap_set_lcd_dma_src_port(int port) -{ - lcd_dma.src_port = port; -} - -void omap_set_lcd_dma_ext_controller(int external) -{ - lcd_dma.ext_ctrl = external; -} -EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); - -void omap_set_lcd_dma_single_transfer(int single) -{ - lcd_dma.single_transfer = single; -} -EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); - -void omap_set_lcd_dma_b1_rotation(int rotate) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); - BUG(); - return; - } - lcd_dma.rotate = rotate; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); - -void omap_set_lcd_dma_b1_mirror(int mirror) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.mirror = mirror; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); - -void omap_set_lcd_dma_b1_vxres(unsigned long vxres) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " - "in 1510 mode\n"); - BUG(); - } - lcd_dma.vxres = vxres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); - -void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.xscale = xscale; - lcd_dma.yscale = yscale; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); - -static void set_b1_regs(void) -{ - unsigned long top, bottom; - int es; - u16 w; - unsigned long en, fn; - long ei, fi; - unsigned long vxres; - unsigned int xscale, yscale; - - switch (lcd_dma.data_type) { - case OMAP_DMA_DATA_TYPE_S8: - es = 1; - break; - case OMAP_DMA_DATA_TYPE_S16: - es = 2; - break; - case OMAP_DMA_DATA_TYPE_S32: - es = 4; - break; - default: - BUG(); - return; - } - - vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; - xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; - yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; - BUG_ON(vxres < lcd_dma.xres); - -#define PIXADDR(x, y) (lcd_dma.addr + \ - ((y) * vxres * yscale + (x) * xscale) * es) -#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) - - switch (lcd_dma.rotate) { - case 0: - if (!lcd_dma.mirror) { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - /* 1510 DMA requires the bottom address to be 2 more - * than the actual last memory access location. */ - if (omap_dma_in_1510_mode() && - lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) - bottom += 2; - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 90: - if (!lcd_dma.mirror) { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - case 180: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); - } else { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 270: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); - } else { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - default: - BUG(); - return; /* Suppress warning about uninitialized vars */ - } - - if (omap_dma_in_1510_mode()) { - omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); - omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); - omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); - omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); - - return; - } - - /* 1610 regs */ - omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); - omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); - omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); - omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); - - omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); - omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); - - w = omap_readw(OMAP1610_DMA_LCD_CSDP); - w &= ~0x03; - w |= lcd_dma.data_type; - omap_writew(w, OMAP1610_DMA_LCD_CSDP); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - /* Always set the source port as SDRAM for now*/ - w &= ~(0x03 << 6); - if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ - else - w &= ~(1 << 1); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - if (!(lcd_dma.rotate || lcd_dma.mirror || - lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* Set the double-indexed addressing mode */ - w |= (0x03 << 12); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); - omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); - omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); -} - -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) -{ - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - if (unlikely(!(w & (1 << 3)))) { - printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); - return IRQ_NONE; - } - /* Ack the IRQ */ - w |= (1 << 3); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - lcd_dma.active = 0; - if (lcd_dma.callback != NULL) - lcd_dma.callback(w, lcd_dma.cb_data); - - return IRQ_HANDLED; -} - -int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data) -{ - spin_lock_irq(&lcd_dma.lock); - if (lcd_dma.reserved) { - spin_unlock_irq(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA channel already reserved\n"); - BUG(); - return -EBUSY; - } - lcd_dma.reserved = 1; - spin_unlock_irq(&lcd_dma.lock); - lcd_dma.callback = callback; - lcd_dma.cb_data = data; - lcd_dma.active = 0; - lcd_dma.single_transfer = 0; - lcd_dma.rotate = 0; - lcd_dma.vxres = 0; - lcd_dma.mirror = 0; - lcd_dma.xscale = 0; - lcd_dma.yscale = 0; - lcd_dma.ext_ctrl = 0; - lcd_dma.src_port = 0; - - return 0; -} -EXPORT_SYMBOL(omap_request_lcd_dma); - -void omap_free_lcd_dma(void) -{ - spin_lock(&lcd_dma.lock); - if (!lcd_dma.reserved) { - spin_unlock(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA is not reserved\n"); - BUG(); - return; - } - if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, - OMAP1610_DMA_LCD_CCR); - lcd_dma.reserved = 0; - spin_unlock(&lcd_dma.lock); -} -EXPORT_SYMBOL(omap_free_lcd_dma); - -void omap_enable_lcd_dma(void) -{ - u16 w; - - /* - * Set the Enable bit only if an external controller is - * connected. Otherwise the OMAP internal controller will - * start the transfer when it gets enabled. - */ - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w |= 1 << 8; - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - lcd_dma.active = 1; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w |= 1 << 7; - omap_writew(w, OMAP1610_DMA_LCD_CCR); -} -EXPORT_SYMBOL(omap_enable_lcd_dma); - -void omap_setup_lcd_dma(void) -{ - BUG_ON(lcd_dma.active); - if (!enable_1510_mode) { - /* Set some reasonable defaults */ - omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); - omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); - omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); - } - set_b1_regs(); - if (!enable_1510_mode) { - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* - * If DMA was already active set the end_prog bit to have - * the programmed register set loaded into the active - * register set. - */ - w |= 1 << 11; /* End_prog */ - if (!lcd_dma.single_transfer) - w |= (3 << 8); /* Auto_init, repeat */ - omap_writew(w, OMAP1610_DMA_LCD_CCR); - } -} -EXPORT_SYMBOL(omap_setup_lcd_dma); - -void omap_stop_lcd_dma(void) -{ - u16 w; - - lcd_dma.active = 0; - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w &= ~(1 << 7); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); -} -EXPORT_SYMBOL(omap_stop_lcd_dma); - void omap_dma_global_context_save(void) { omap_dma_global_context.dma_irqenable_l0 = @@ -2465,14 +2084,6 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; - if (cpu_is_omap16xx()) { - u16 w; - - /* this would prevent OMAP sleep */ - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - } } else if (cpu_class_is_omap2()) { u8 revision = dma_read(REVISION) & 0xff; printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", @@ -2483,7 +2094,6 @@ static int __init omap_init_dma(void) return 0; } - spin_lock_init(&lcd_dma.lock); spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { @@ -2548,22 +2158,6 @@ static int __init omap_init_dma(void) } } - - /* FIXME: Update LCD DMA to work on 24xx */ - if (cpu_class_is_omap1()) { - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, - "LCD DMA", NULL); - if (r != 0) { - int i; - - printk(KERN_ERR "unable to request IRQ for LCD DMA " - "(error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(omap1_dma_irq[i], (void *) (i + 1)); - goto out_free; - } - } - return 0; out_free: diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 78a4ce538dbd..d3eea4f47533 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -28,13 +28,13 @@ #include <linux/platform_device.h> #include <linux/bootmem.h> #include <linux/io.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach/map.h> #include <plat/board.h> #include <plat/sram.h> -#include <plat/omapfb.h> #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) @@ -55,6 +55,10 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ +} + static inline int ranges_overlap(unsigned long start1, unsigned long size1, unsigned long start2, unsigned long size2) { @@ -327,7 +331,33 @@ static inline int omap_init_fb(void) arch_initcall(omap_init_fb); -#else +#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + +static u64 omap_fb_dma_mask = ~(u32)0; +static struct omapfb_platform_data omapfb_config; + +static struct platform_device omap_fb_device = { + .name = "omapfb", + .id = -1, + .dev = { + .dma_mask = &omap_fb_dma_mask, + .coherent_dma_mask = ~(u32)0, + .platform_data = &omapfb_config, + }, + .num_resources = 0, +}; + +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ + omapfb_config = *data; +} + +static inline int omap_init_fb(void) +{ + return platform_device_register(&omap_fb_device); +} + +arch_initcall(omap_init_fb); void omapfb_reserve_sdram(void) {} unsigned long omapfb_reserve_sram(unsigned long sram_pstart, @@ -339,5 +369,20 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart, return 0; } +#else + +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ +} + +void omapfb_reserve_sdram(void) {} +unsigned long omapfb_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long start_avail, + unsigned long size_avail) +{ + return 0; +} #endif diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index c08362dbb8ed..33fff4ef382d 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = { #endif }; -#if defined(CONFIG_ARCH_OMAP24XX) -static const int omap24xx_pins[][2] = { - { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, - { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, -}; -#else -static const int omap24xx_pins[][2] = {}; -#endif -#if defined(CONFIG_ARCH_OMAP34XX) -static const int omap34xx_pins[][2] = { - { K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA}, - { AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA}, - { AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA}, -}; -#else -static const int omap34xx_pins[][2] = {}; -#endif - #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static void __init omap_i2c_mux_pins(int bus) -{ - int scl, sda; - - if (cpu_class_is_omap1()) { - scl = I2C_SCL; - sda = I2C_SDA; - } else if (cpu_is_omap24xx()) { - scl = omap24xx_pins[bus][0]; - sda = omap24xx_pins[bus][1]; - } else if (cpu_is_omap34xx()) { - scl = omap34xx_pins[bus][0]; - sda = omap34xx_pins[bus][1]; - } else { - return; - } - - omap_cfg_reg(sda); - omap_cfg_reg(scl); -} - static int __init omap_i2c_nr_ports(void) { int ports = 0; @@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id) res[1].start = irq; } - omap_i2c_mux_pins(bus_id - 1); return platform_device_register(pdev); } @@ -209,7 +169,7 @@ out: subsys_initcall(omap_register_i2c_bus_cmdline); /** - * omap_register_i2c_bus - register I2C bus with device descriptors + * omap_plat_register_i2c_bus - register I2C bus with device descriptors * @bus_id: bus id counting from number 1 * @clkrate: clock rate of the bus in kHz * @info: pointer into I2C device descriptor table or NULL @@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline); * * Returns 0 on success or an error code. */ -int __init omap_register_i2c_bus(int bus_id, u32 clkrate, +int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len) { diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index abb17b604f82..376ce18216ff 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -114,15 +114,6 @@ struct omap_pwm_led_platform_data { void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); }; -/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - struct omap_uart_config { /* Bit field of UARTs present; bit 0 --> UART1 */ unsigned int enabled_uarts; diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h new file mode 100644 index 000000000000..35b36caf5f91 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -0,0 +1,41 @@ +/* + * clkdev <-> OMAP integration + * + * Russell King <linux@arm.linux.org.uk> + * + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H + +#include <asm/clkdev.h> + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + + +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) +#define CK_243X (1 << 4) +#define CK_242X (1 << 5) +#define CK_343X (1 << 6) +#define CK_3430ES1 (1 << 7) +#define CK_3430ES2 (1 << 8) +#define CK_443X (1 << 9) + +#endif + diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 4b8b0d65cbf2..309b6d1dccdb 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -13,6 +13,8 @@ #ifndef __ARCH_ARM_OMAP_CLOCK_H #define __ARCH_ARM_OMAP_CLOCK_H +#include <linux/list.h> + struct module; struct clk; struct clockdomain; @@ -148,6 +150,8 @@ extern const struct clkops clkops_null; #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ #define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ +#define CLOCK_IN_OMAP4430 (1 << 13) +#define ALWAYS_ENABLED (1 << 14) /* bits 13-31 are currently free */ /* Clksel_rate flags */ @@ -156,6 +160,7 @@ extern const struct clkops clkops_null; #define RATE_IN_243X (1 << 2) #define RATE_IN_343X (1 << 3) /* rates common to all 343X */ #define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ +#define RATE_IN_4430 (1 << 5) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 064f1730f43b..32c22272425d 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -27,7 +27,7 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H -#include <linux/i2c.h> +#include <plat/i2c.h> struct sys_timer; @@ -36,18 +36,6 @@ extern void __iomem *gic_cpu_base_addr; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif /* IO bases for various OMAP processors */ struct omap_globals { @@ -58,6 +46,7 @@ struct omap_globals { void __iomem *ctrl; /* System Control Module */ void __iomem *prm; /* Power and Reset Management */ void __iomem *cm; /* Clock Management */ + void __iomem *cm2; }; void omap2_set_globals_242x(void); @@ -71,4 +60,24 @@ void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); +/** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + */ +#define omap_test_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2e1789001dfe..9a028bdebb06 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -176,11 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) +IS_OMAP_CLASS(44xx, 0x44) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) +IS_OMAP_SUBCLASS(443x, 0x443) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -393,11 +395,11 @@ IS_OMAP_TYPE(3517, 0x3517) (!omap3_has_iva()) && \ (!omap3_has_sgx())) # define cpu_is_omap3515() (cpu_is_omap3430() && \ - (omap3_has_iva()) && \ - (!omap3_has_sgx())) + (!omap3_has_iva()) && \ + (omap3_has_sgx())) # define cpu_is_omap3525() (cpu_is_omap3430() && \ - (omap3_has_sgx()) && \ - (!omap3_has_iva())) + (!omap3_has_sgx()) && \ + (omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) # define cpu_is_omap3505() is_omap3505() # define cpu_is_omap3517() is_omap3517() @@ -408,8 +410,8 @@ IS_OMAP_TYPE(3517, 0x3517) # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x -# define cpu_is_omap44xx() 1 -# define cpu_is_omap443x() 1 +# define cpu_is_omap44xx() is_omap44xx() +# define cpu_is_omap443x() is_omap443x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -436,14 +438,15 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_0 0x36300034 #define OMAP35XX_CLASS 0x35000034 -#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12)) -#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) -#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12)) -#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12)) -#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 12)) -#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 12)) - -#define OMAP443X_CLASS 0x44300034 +#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) +#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8)) +#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8)) +#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8)) +#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8)) +#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) + +#define OMAP443X_CLASS 0x44300044 +#define OMAP4430_REV_ES1_0 0x44300044 /* * omap_chip bits diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h new file mode 100644 index 000000000000..c66e464732df --- /dev/null +++ b/arch/arm/plat-omap/include/plat/display.h @@ -0,0 +1,575 @@ +/* + * linux/include/asm-arm/arch-omap/display.h + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ASM_ARCH_OMAP_DISPLAY_H +#define __ASM_ARCH_OMAP_DISPLAY_H + +#include <linux/list.h> +#include <linux/kobject.h> +#include <linux/device.h> +#include <asm/atomic.h> + +#define DISPC_IRQ_FRAMEDONE (1 << 0) +#define DISPC_IRQ_VSYNC (1 << 1) +#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) +#define DISPC_IRQ_EVSYNC_ODD (1 << 3) +#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) +#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) +#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) +#define DISPC_IRQ_GFX_END_WIN (1 << 7) +#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) +#define DISPC_IRQ_OCP_ERR (1 << 9) +#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) +#define DISPC_IRQ_VID1_END_WIN (1 << 11) +#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) +#define DISPC_IRQ_VID2_END_WIN (1 << 13) +#define DISPC_IRQ_SYNC_LOST (1 << 14) +#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) +#define DISPC_IRQ_WAKEUP (1 << 16) + +struct omap_dss_device; +struct omap_overlay_manager; + +enum omap_display_type { + OMAP_DISPLAY_TYPE_NONE = 0, + OMAP_DISPLAY_TYPE_DPI = 1 << 0, + OMAP_DISPLAY_TYPE_DBI = 1 << 1, + OMAP_DISPLAY_TYPE_SDI = 1 << 2, + OMAP_DISPLAY_TYPE_DSI = 1 << 3, + OMAP_DISPLAY_TYPE_VENC = 1 << 4, +}; + +enum omap_plane { + OMAP_DSS_GFX = 0, + OMAP_DSS_VIDEO1 = 1, + OMAP_DSS_VIDEO2 = 2 +}; + +enum omap_channel { + OMAP_DSS_CHANNEL_LCD = 0, + OMAP_DSS_CHANNEL_DIGIT = 1, +}; + +enum omap_color_mode { + OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ + OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ + OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ + OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ + OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ + OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ + OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ + OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ + OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ + OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ + OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ + OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ + OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ + OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ + + OMAP_DSS_COLOR_GFX_OMAP2 = + OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | + OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 | + OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P, + + OMAP_DSS_COLOR_VID_OMAP2 = + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 | + OMAP_DSS_COLOR_UYVY, + + OMAP_DSS_COLOR_GFX_OMAP3 = + OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | + OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | + OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, + + OMAP_DSS_COLOR_VID1_OMAP3 = + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 | + OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P | + OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, + + OMAP_DSS_COLOR_VID2_OMAP3 = + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 | + OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 | + OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, +}; + +enum omap_lcd_display_type { + OMAP_DSS_LCD_DISPLAY_STN, + OMAP_DSS_LCD_DISPLAY_TFT, +}; + +enum omap_dss_load_mode { + OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, + OMAP_DSS_LOAD_CLUT_ONLY = 1, + OMAP_DSS_LOAD_FRAME_ONLY = 2, + OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, +}; + +enum omap_dss_trans_key_type { + OMAP_DSS_COLOR_KEY_GFX_DST = 0, + OMAP_DSS_COLOR_KEY_VID_SRC = 1, +}; + +enum omap_rfbi_te_mode { + OMAP_DSS_RFBI_TE_MODE_1 = 1, + OMAP_DSS_RFBI_TE_MODE_2 = 2, +}; + +enum omap_panel_config { + OMAP_DSS_LCD_IVS = 1<<0, + OMAP_DSS_LCD_IHS = 1<<1, + OMAP_DSS_LCD_IPC = 1<<2, + OMAP_DSS_LCD_IEO = 1<<3, + OMAP_DSS_LCD_RF = 1<<4, + OMAP_DSS_LCD_ONOFF = 1<<5, + + OMAP_DSS_LCD_TFT = 1<<20, +}; + +enum omap_dss_venc_type { + OMAP_DSS_VENC_TYPE_COMPOSITE, + OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +enum omap_display_caps { + OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, + OMAP_DSS_DISPLAY_CAP_TEAR_ELIM = 1 << 1, +}; + +enum omap_dss_update_mode { + OMAP_DSS_UPDATE_DISABLED = 0, + OMAP_DSS_UPDATE_AUTO, + OMAP_DSS_UPDATE_MANUAL, +}; + +enum omap_dss_display_state { + OMAP_DSS_DISPLAY_DISABLED = 0, + OMAP_DSS_DISPLAY_ACTIVE, + OMAP_DSS_DISPLAY_SUSPENDED, +}; + +/* XXX perhaps this should be removed */ +enum omap_dss_overlay_managers { + OMAP_DSS_OVL_MGR_LCD, + OMAP_DSS_OVL_MGR_TV, +}; + +enum omap_dss_rotation_type { + OMAP_DSS_ROT_DMA = 0, + OMAP_DSS_ROT_VRFB = 1, +}; + +/* clockwise rotation angle */ +enum omap_dss_rotation_angle { + OMAP_DSS_ROT_0 = 0, + OMAP_DSS_ROT_90 = 1, + OMAP_DSS_ROT_180 = 2, + OMAP_DSS_ROT_270 = 3, +}; + +enum omap_overlay_caps { + OMAP_DSS_OVL_CAP_SCALE = 1 << 0, + OMAP_DSS_OVL_CAP_DISPC = 1 << 1, +}; + +enum omap_overlay_manager_caps { + OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, +}; + +/* RFBI */ + +struct rfbi_timings { + int cs_on_time; + int cs_off_time; + int we_on_time; + int we_off_time; + int re_on_time; + int re_off_time; + int we_cycle_time; + int re_cycle_time; + int cs_pulse_width; + int access_time; + + int clk_div; + + u32 tim[5]; /* set by rfbi_convert_timings() */ + + int converted; +}; + +void omap_rfbi_write_command(const void *buf, u32 len); +void omap_rfbi_read_data(void *buf, u32 len); +void omap_rfbi_write_data(const void *buf, u32 len); +void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, + u16 x, u16 y, + u16 w, u16 h); +int omap_rfbi_enable_te(bool enable, unsigned line); +int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, + unsigned hs_pulse_time, unsigned vs_pulse_time, + int hs_pol_inv, int vs_pol_inv, int extif_div); + +/* DSI */ +void dsi_bus_lock(void); +void dsi_bus_unlock(void); +int dsi_vc_dcs_write(int channel, u8 *data, int len); +int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); +int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); +int dsi_vc_set_max_rx_packet_size(int channel, u16 len); +int dsi_vc_send_null(int channel); +int dsi_vc_send_bta_sync(int channel); + +/* Board specific data */ +struct omap_dss_board_info { + int (*get_last_off_on_transaction_id)(struct device *dev); + int num_devices; + struct omap_dss_device **devices; + struct omap_dss_device *default_device; +}; + +struct omap_video_timings { + /* Unit: pixels */ + u16 x_res; + /* Unit: pixels */ + u16 y_res; + /* Unit: KHz */ + u32 pixel_clock; + /* Unit: pixel clocks */ + u16 hsw; /* Horizontal synchronization pulse width */ + /* Unit: pixel clocks */ + u16 hfp; /* Horizontal front porch */ + /* Unit: pixel clocks */ + u16 hbp; /* Horizontal back porch */ + /* Unit: line clocks */ + u16 vsw; /* Vertical synchronization pulse width */ + /* Unit: line clocks */ + u16 vfp; /* Vertical front porch */ + /* Unit: line clocks */ + u16 vbp; /* Vertical back porch */ +}; + +#ifdef CONFIG_OMAP2_DSS_VENC +/* Hardcoded timings for tv modes. Venc only uses these to + * identify the mode, and does not actually use the configs + * itself. However, the configs should be something that + * a normal monitor can also show */ +const extern struct omap_video_timings omap_dss_pal_timings; +const extern struct omap_video_timings omap_dss_ntsc_timings; +#endif + +struct omap_overlay_info { + bool enabled; + + u32 paddr; + void __iomem *vaddr; + u16 screen_width; + u16 width; + u16 height; + enum omap_color_mode color_mode; + u8 rotation; + enum omap_dss_rotation_type rotation_type; + bool mirror; + + u16 pos_x; + u16 pos_y; + u16 out_width; /* if 0, out_width == width */ + u16 out_height; /* if 0, out_height == height */ + u8 global_alpha; +}; + +struct omap_overlay { + struct kobject kobj; + struct list_head list; + + /* static fields */ + const char *name; + int id; + enum omap_color_mode supported_modes; + enum omap_overlay_caps caps; + + /* dynamic fields */ + struct omap_overlay_manager *manager; + struct omap_overlay_info info; + + /* if true, info has been changed, but not applied() yet */ + bool info_dirty; + + int (*set_manager)(struct omap_overlay *ovl, + struct omap_overlay_manager *mgr); + int (*unset_manager)(struct omap_overlay *ovl); + + int (*set_overlay_info)(struct omap_overlay *ovl, + struct omap_overlay_info *info); + void (*get_overlay_info)(struct omap_overlay *ovl, + struct omap_overlay_info *info); + + int (*wait_for_go)(struct omap_overlay *ovl); +}; + +struct omap_overlay_manager_info { + u32 default_color; + + enum omap_dss_trans_key_type trans_key_type; + u32 trans_key; + bool trans_enabled; + + bool alpha_enabled; +}; + +struct omap_overlay_manager { + struct kobject kobj; + struct list_head list; + + /* static fields */ + const char *name; + int id; + enum omap_overlay_manager_caps caps; + int num_overlays; + struct omap_overlay **overlays; + enum omap_display_type supported_displays; + + /* dynamic fields */ + struct omap_dss_device *device; + struct omap_overlay_manager_info info; + + bool device_changed; + /* if true, info has been changed but not applied() yet */ + bool info_dirty; + + int (*set_device)(struct omap_overlay_manager *mgr, + struct omap_dss_device *dssdev); + int (*unset_device)(struct omap_overlay_manager *mgr); + + int (*set_manager_info)(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info); + void (*get_manager_info)(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info); + + int (*apply)(struct omap_overlay_manager *mgr); + int (*wait_for_go)(struct omap_overlay_manager *mgr); +}; + +struct omap_dss_device { + struct device dev; + + enum omap_display_type type; + + union { + struct { + u8 data_lines; + } dpi; + + struct { + u8 channel; + u8 data_lines; + } rfbi; + + struct { + u8 datapairs; + } sdi; + + struct { + u8 clk_lane; + u8 clk_pol; + u8 data1_lane; + u8 data1_pol; + u8 data2_lane; + u8 data2_pol; + + struct { + u16 regn; + u16 regm; + u16 regm3; + u16 regm4; + + u16 lp_clk_div; + + u16 lck_div; + u16 pck_div; + } div; + + bool ext_te; + u8 ext_te_gpio; + } dsi; + + struct { + enum omap_dss_venc_type type; + bool invert_polarity; + } venc; + } phy; + + struct { + struct omap_video_timings timings; + + int acbi; /* ac-bias pin transitions per interrupt */ + /* Unit: line clocks */ + int acb; /* ac-bias pin frequency */ + + enum omap_panel_config config; + + u8 recommended_bpp; + + struct omap_dss_device *ctrl; + } panel; + + struct { + u8 pixel_size; + struct rfbi_timings rfbi_timings; + struct omap_dss_device *panel; + } ctrl; + + int reset_gpio; + + int max_backlight_level; + + const char *name; + + /* used to match device to driver */ + const char *driver_name; + + void *data; + + struct omap_dss_driver *driver; + + /* helper variable for driver suspend/resume */ + bool activate_after_resume; + + enum omap_display_caps caps; + + struct omap_overlay_manager *manager; + + enum omap_dss_display_state state; + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev); + + int (*suspend)(struct omap_dss_device *dssdev); + int (*resume)(struct omap_dss_device *dssdev); + + void (*get_resolution)(struct omap_dss_device *dssdev, + u16 *xres, u16 *yres); + int (*get_recommended_bpp)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + int (*update)(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h); + int (*sync)(struct omap_dss_device *dssdev); + int (*wait_vsync)(struct omap_dss_device *dssdev); + + int (*set_update_mode)(struct omap_dss_device *dssdev, + enum omap_dss_update_mode); + enum omap_dss_update_mode (*get_update_mode) + (struct omap_dss_device *dssdev); + + int (*enable_te)(struct omap_dss_device *dssdev, bool enable); + int (*get_te)(struct omap_dss_device *dssdev); + + u8 (*get_rotate)(struct omap_dss_device *dssdev); + int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); + + bool (*get_mirror)(struct omap_dss_device *dssdev); + int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); + + int (*run_test)(struct omap_dss_device *dssdev, int test); + int (*memory_read)(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h); + + int (*set_wss)(struct omap_dss_device *dssdev, u32 wss); + u32 (*get_wss)(struct omap_dss_device *dssdev); + + /* platform specific */ + int (*platform_enable)(struct omap_dss_device *dssdev); + void (*platform_disable)(struct omap_dss_device *dssdev); + int (*set_backlight)(struct omap_dss_device *dssdev, int level); + int (*get_backlight)(struct omap_dss_device *dssdev); +}; + +struct omap_dss_driver { + struct device_driver driver; + + int (*probe)(struct omap_dss_device *); + void (*remove)(struct omap_dss_device *); + + int (*enable)(struct omap_dss_device *display); + void (*disable)(struct omap_dss_device *display); + int (*suspend)(struct omap_dss_device *display); + int (*resume)(struct omap_dss_device *display); + int (*run_test)(struct omap_dss_device *display, int test); + + void (*setup_update)(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h); + + int (*enable_te)(struct omap_dss_device *dssdev, bool enable); + int (*wait_for_te)(struct omap_dss_device *dssdev); + + u8 (*get_rotate)(struct omap_dss_device *dssdev); + int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); + + bool (*get_mirror)(struct omap_dss_device *dssdev); + int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); + + int (*memory_read)(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h); +}; + +int omap_dss_register_driver(struct omap_dss_driver *); +void omap_dss_unregister_driver(struct omap_dss_driver *); + +int omap_dss_register_device(struct omap_dss_device *); +void omap_dss_unregister_device(struct omap_dss_device *); + +void omap_dss_get_device(struct omap_dss_device *dssdev); +void omap_dss_put_device(struct omap_dss_device *dssdev); +#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL) +struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from); +struct omap_dss_device *omap_dss_find_device(void *data, + int (*match)(struct omap_dss_device *dssdev, void *data)); + +int omap_dss_start_device(struct omap_dss_device *dssdev); +void omap_dss_stop_device(struct omap_dss_device *dssdev); + +int omap_dss_get_num_overlay_managers(void); +struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); + +int omap_dss_get_num_overlays(void); +struct omap_overlay *omap_dss_get_overlay(int num); + +typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); +int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); +int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask); + +int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout); +int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, + unsigned long timeout); + +#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver) +#define to_dss_device(x) container_of((x), struct omap_dss_device, dev) + +#endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 1c017b29b7e9..4ede9e17a0be 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -401,33 +401,6 @@ /*----------------------------------------------------------------------------*/ -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -441,6 +414,8 @@ #define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) #define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) +#define OMAP_DMA_CCR_EN (1 << 7) + #define OMAP_DMA_DATA_TYPE_S8 0x00 #define OMAP_DMA_DATA_TYPE_S16 0x01 #define OMAP_DMA_DATA_TYPE_S32 0x02 @@ -503,14 +478,6 @@ #define DMA_CH_PRIO_HIGH 0x1 #define DMA_CH_PRIO_LOW 0x0 /* Def */ -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - enum omap_dma_burst_mode { OMAP_DMA_DATA_BURST_DIS = 0, OMAP_DMA_DATA_BURST_4, @@ -661,20 +628,13 @@ extern int omap_modify_dma_chain_params(int chain_id, extern int omap_dma_chain_status(int chain_id); #endif -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include <mach/lcd_dma.h> +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 696e0ca051b7..e081338e0b23 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -45,7 +45,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) +#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2) #define GPMC_CONFIG1_MUXADDDATA (1 << 9) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h new file mode 100644 index 000000000000..585d9ca68b97 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +int omap_plat_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index ba77de601501..8f069cc80350 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -130,58 +130,11 @@ #define OMAP2_PULL_UP (1 << 4) #define OMAP2_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ -#define OMAP3_INPUT_EN (1 << 8) -#define OMAP3_OFF_EN (1 << 9) -#define OMAP3_OFFOUT_EN (1 << 10) -#define OMAP3_OFFOUT_VAL (1 << 11) -#define OMAP3_OFF_PULL_EN (1 << 12) -#define OMAP3_OFF_PULL_UP (1 << 13) -#define OMAP3_WAKEUP_EN (1 << 14) - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP34XX_MUX_MODE0 0 -#define OMAP34XX_MUX_MODE1 1 -#define OMAP34XX_MUX_MODE2 2 -#define OMAP34XX_MUX_MODE3 3 -#define OMAP34XX_MUX_MODE4 4 -#define OMAP34XX_MUX_MODE5 5 -#define OMAP34XX_MUX_MODE6 6 -#define OMAP34XX_MUX_MODE7 7 - -/* 34xx active pin states */ -#define OMAP34XX_PIN_OUTPUT 0 -#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN -#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ - | OMAP2_PULL_UP) -#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) - -/* 34xx off mode states */ -#define OMAP34XX_PIN_OFF_NONE 0 -#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ - | OMAP3_OFFOUT_VAL) -#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) -#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ - | OMAP3_OFF_PULL_UP) -#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) -#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN - -#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ - .name = desc, \ - .debug = 0, \ - .mux_reg = reg_offset, \ - .mux_val = mux_value \ -}, - struct pin_config { char *name; const unsigned int mux_reg; unsigned char debug; -#if defined(CONFIG_ARCH_OMAP34XX) - u16 mux_val; /* Wake-up, off mode, pull, mux mode */ -#endif - #if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -219,11 +172,17 @@ enum omap7xx_index { AA17_7XX_USB_DM, W16_7XX_USB_PU_EN, W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, /* MMC */ MMC_7XX_CMD, MMC_7XX_CLK, MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, }; enum omap1xxx_index { @@ -681,181 +640,6 @@ enum omap24xx_index { }; -enum omap34xx_index { - /* 34xx I2C */ - K21_34XX_I2C1_SCL, - J21_34XX_I2C1_SDA, - AF15_34XX_I2C2_SCL, - AE15_34XX_I2C2_SDA, - AF14_34XX_I2C3_SCL, - AG14_34XX_I2C3_SDA, - AD26_34XX_I2C4_SCL, - AE26_34XX_I2C4_SDA, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ - Y8_3430_USB1HS_PHY_CLK, - Y9_3430_USB1HS_PHY_STP, - AA14_3430_USB1HS_PHY_DIR, - AA11_3430_USB1HS_PHY_NXT, - W13_3430_USB1HS_PHY_DATA0, - W12_3430_USB1HS_PHY_DATA1, - W11_3430_USB1HS_PHY_DATA2, - Y11_3430_USB1HS_PHY_DATA3, - W9_3430_USB1HS_PHY_DATA4, - Y12_3430_USB1HS_PHY_DATA5, - W8_3430_USB1HS_PHY_DATA6, - Y13_3430_USB1HS_PHY_DATA7, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ - AA8_3430_USB2HS_PHY_CLK, - AA10_3430_USB2HS_PHY_STP, - AA9_3430_USB2HS_PHY_DIR, - AB11_3430_USB2HS_PHY_NXT, - AB10_3430_USB2HS_PHY_DATA0, - AB9_3430_USB2HS_PHY_DATA1, - W3_3430_USB2HS_PHY_DATA2, - T4_3430_USB2HS_PHY_DATA3, - T3_3430_USB2HS_PHY_DATA4, - R3_3430_USB2HS_PHY_DATA5, - R4_3430_USB2HS_PHY_DATA6, - T2_3430_USB2HS_PHY_DATA7, - - - /* TLL - HSUSB: 12-pin TLL Port 1*/ - Y8_3430_USB1HS_TLL_CLK, - Y9_3430_USB1HS_TLL_STP, - AA14_3430_USB1HS_TLL_DIR, - AA11_3430_USB1HS_TLL_NXT, - W13_3430_USB1HS_TLL_DATA0, - W12_3430_USB1HS_TLL_DATA1, - W11_3430_USB1HS_TLL_DATA2, - Y11_3430_USB1HS_TLL_DATA3, - W9_3430_USB1HS_TLL_DATA4, - Y12_3430_USB1HS_TLL_DATA5, - W8_3430_USB1HS_TLL_DATA6, - Y13_3430_USB1HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 2*/ - AA8_3430_USB2HS_TLL_CLK, - AA10_3430_USB2HS_TLL_STP, - AA9_3430_USB2HS_TLL_DIR, - AB11_3430_USB2HS_TLL_NXT, - AB10_3430_USB2HS_TLL_DATA0, - AB9_3430_USB2HS_TLL_DATA1, - W3_3430_USB2HS_TLL_DATA2, - T4_3430_USB2HS_TLL_DATA3, - T3_3430_USB2HS_TLL_DATA4, - R3_3430_USB2HS_TLL_DATA5, - R4_3430_USB2HS_TLL_DATA6, - T2_3430_USB2HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 3*/ - AA6_3430_USB3HS_TLL_CLK, - AB3_3430_USB3HS_TLL_STP, - AA3_3430_USB3HS_TLL_DIR, - Y3_3430_USB3HS_TLL_NXT, - AA5_3430_USB3HS_TLL_DATA0, - Y4_3430_USB3HS_TLL_DATA1, - Y5_3430_USB3HS_TLL_DATA2, - W5_3430_USB3HS_TLL_DATA3, - AB12_3430_USB3HS_TLL_DATA4, - AB13_3430_USB3HS_TLL_DATA5, - AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7, - - /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ - AF10_3430_USB1FS_PHY_MM1_RXDP, - AG9_3430_USB1FS_PHY_MM1_RXDM, - W13_3430_USB1FS_PHY_MM1_RXRCV, - W12_3430_USB1FS_PHY_MM1_TXSE0, - W11_3430_USB1FS_PHY_MM1_TXDAT, - Y11_3430_USB1FS_PHY_MM1_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ - AF7_3430_USB2FS_PHY_MM2_RXDP, - AH7_3430_USB2FS_PHY_MM2_RXDM, - AB10_3430_USB2FS_PHY_MM2_RXRCV, - AB9_3430_USB2FS_PHY_MM2_TXSE0, - W3_3430_USB2FS_PHY_MM2_TXDAT, - T4_3430_USB2FS_PHY_MM2_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ - AH3_3430_USB3FS_PHY_MM3_RXDP, - AE3_3430_USB3FS_PHY_MM3_RXDM, - AD1_3430_USB3FS_PHY_MM3_RXRCV, - AE1_3430_USB3FS_PHY_MM3_TXSE0, - AD2_3430_USB3FS_PHY_MM3_TXDAT, - AC1_3430_USB3FS_PHY_MM3_TXEN_N, - - /* 34xx GPIO - * - normally these are bidirectional, no internal pullup/pulldown - * - "_UP" suffix (GPIO3_UP) if internal pullup is configured - * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown - * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) - */ - AF26_34XX_GPIO0, - AF22_34XX_GPIO9, - AG9_34XX_GPIO23, - AH8_34XX_GPIO29, - U8_34XX_GPIO54_OUT, - U8_34XX_GPIO54_DOWN, - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, - AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, - AF5_34XX_GPIO142, - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, - - /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ - H16_34XX_SDRC_CKE0, - H17_34XX_SDRC_CKE1, - - /* MMC1 */ - N28_3430_MMC1_CLK, - M27_3430_MMC1_CMD, - N27_3430_MMC1_DAT0, - N26_3430_MMC1_DAT1, - N25_3430_MMC1_DAT2, - P28_3430_MMC1_DAT3, - P27_3430_MMC1_DAT4, - P26_3430_MMC1_DAT5, - R27_3430_MMC1_DAT6, - R25_3430_MMC1_DAT7, - - /* MMC2 */ - AE2_3430_MMC2_CLK, - AG5_3430_MMC2_CMD, - AH5_3430_MMC2_DAT0, - AH4_3430_MMC2_DAT1, - AG4_3430_MMC2_DAT2, - AF4_3430_MMC2_DAT3, - AE4_3430_MMC2_DAT4, - AH3_3430_MMC2_DAT5, - AF3_3430_MMC2_DAT6, - AE3_3430_MMC2_DAT7, - - /* MMC3 */ - AF10_3430_MMC3_CLK, - AC3_3430_MMC3_CMD, - AE11_3430_MMC3_DAT0, - AH9_3430_MMC3_DAT1, - AF13_3430_MMC3_DAT2, - AF13_3430_MMC3_DAT3, - - /* SYS_NIRQ T2 INT1 */ - AF26_34XX_SYS_NIRQ, - - /* EHCI GPIO's for OMAP3EVM (Rev >= E) */ - AH14_34XX_GPIO21, - AF9_34XX_GPIO22, - U3_34XX_GPIO61, -}; - struct omap_mux_cfg { struct pin_config *pins; unsigned long size; @@ -865,14 +649,14 @@ struct omap_mux_cfg { #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ extern int omap1_mux_init(void); -extern int omap2_mux_init(void); extern int omap_mux_register(struct omap_mux_cfg *); extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } #endif +extern int omap2_mux_init(void); + #endif diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h index 0e69b504c25f..7560b4d583a3 100644 --- a/arch/arm/plat-omap/include/plat/omap16xx.h +++ b/arch/arm/plat-omap/include/plat/omap16xx.h @@ -124,7 +124,7 @@ #define TIPB_SWITCH_BASE (0xfffbc800) #define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) -/* UART3 Registers Maping through MPU bus */ +/* UART3 Registers Mapping through MPU bus */ #define UART3_RHR (OMAP_UART3_BASE + 0) #define UART3_THR (OMAP_UART3_BASE + 0) #define UART3_DLL (OMAP_UART3_BASE + 0) diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index e52902a15c1a..ef870de43c29 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -26,8 +26,10 @@ #define OMAP44XX_EMIF2_BASE 0x4d000000 #define OMAP44XX_DMM_BASE 0x4e000000 #define OMAP4430_32KSYNCT_BASE 0x4a304000 -#define OMAP4430_CM_BASE 0x4a004000 -#define OMAP4430_PRM_BASE 0x48306000 +#define OMAP4430_CM1_BASE 0x4a004000 +#define OMAP4430_CM_BASE OMAP4430_CM1_BASE +#define OMAP4430_CM2_BASE 0x4a008000 +#define OMAP4430_PRM_BASE 0x4a306000 #define OMAP44XX_GPMC_BASE 0x50000000 #define OMAP443X_SCM_BASE 0x4a002000 #define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 11a9773a4e7f..dc1fac1d805c 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -50,8 +50,8 @@ * @pm_lats: ptr to an omap_device_pm_latency table * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats * @pm_lat_level: array index of the last odpl entry executed - -1 if never - * @dev_wakeup_lat: dev wakeup latency in microseconds - * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM + * @dev_wakeup_lat: dev wakeup latency in nanoseconds + * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM * @_state: one of OMAP_DEVICE_STATE_* (see above) * @flags: device flags * @@ -137,5 +137,7 @@ struct omap_device_pm_latency { }; -#endif +/* Get omap_device pointer from platform_device pointer */ +#define to_omap_device(x) container_of((x), struct omap_device, pdev) +#endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index dbdd123eca16..007935a921ea 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -50,6 +50,8 @@ struct omap_device; #define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT) #define SYSC_SOFTRESET_SHIFT 1 #define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT) +#define SYSC_AUTOIDLE_SHIFT 0 +#define SYSC_AUTOIDLE_MASK (1 << SYSC_AUTOIDLE_SHIFT) /* OCP SYSSTATUS bit shifts/masks */ #define SYSS_RESETDONE_SHIFT 0 @@ -62,7 +64,21 @@ struct omap_device; /** - * struct omap_hwmod_dma_info - MPU address space handled by the hwmod + * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod + * @name: name of the IRQ channel (module local name) + * @irq_ch: IRQ channel ID + * + * @name should be something short, e.g., "tx" or "rx". It is for use + * by platform_get_resource_byname(). It is defined locally to the + * hwmod. + */ +struct omap_hwmod_irq_info { + const char *name; + u16 irq; +}; + +/** + * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) * @dma_ch: DMA channel ID * @@ -294,13 +310,17 @@ struct omap_hwmod_omap4_prcm { * SDRAM controller, etc. * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM * controller, etc. + * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) + * when module is enabled, rather than the default, which is to + * enable autoidle * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) #define HWMOD_INIT_NO_RESET (1 << 2) #define HWMOD_INIT_NO_IDLE (1 << 3) -#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 4) +#define HWMOD_NO_OCP_AUTOIDLE (1 << 4) +#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) /* * omap_hwmod._int_flags definitions @@ -373,7 +393,7 @@ struct omap_hwmod_omap4_prcm { struct omap_hwmod { const char *name; struct omap_device *od; - u8 *mpu_irqs; + struct omap_hwmod_irq_info *mpu_irqs; struct omap_hwmod_dma_info *sdma_chs; union { struct omap_hwmod_omap2_prcm omap2; diff --git a/arch/arm/plat-omap/include/plat/omapfb.h b/arch/arm/plat-omap/include/plat/omapfb.h deleted file mode 100644 index bfef7ab95f17..000000000000 --- a/arch/arm/plat-omap/include/plat/omapfb.h +++ /dev/null @@ -1,398 +0,0 @@ -/* - * File: arch/arm/plat-omap/include/mach/omapfb.h - * - * Framebuffer driver for TI OMAP boards - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAPFB_H -#define __OMAPFB_H - -#include <asm/ioctl.h> -#include <asm/types.h> - -/* IOCTL commands. */ - -#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) -#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) -#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) -#define OMAP_IO(num) _IO('O', num) - -#define OMAPFB_MIRROR OMAP_IOW(31, int) -#define OMAPFB_SYNC_GFX OMAP_IO(37) -#define OMAPFB_VSYNC OMAP_IO(38) -#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) -#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) -#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) -#define OMAPFB_LCD_TEST OMAP_IOW(45, int) -#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) -#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) -#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) -#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) -#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) -#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) -#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) -#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) -#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) - -#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff -#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 -#define OMAPFB_CAPS_PANEL_MASK 0xff000000 - -#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 -#define OMAPFB_CAPS_TEARSYNC 0x00002000 -#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 -#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 -#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 -#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 -#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 -#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 -#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 - -/* Values from DSP must map to lower 16-bits */ -#define OMAPFB_FORMAT_MASK 0x00ff -#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 -#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 -#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 -#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 -#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 - -#define OMAPFB_EVENT_READY 1 -#define OMAPFB_EVENT_DISABLED 2 - -#define OMAPFB_MEMTYPE_SDRAM 0 -#define OMAPFB_MEMTYPE_SRAM 1 -#define OMAPFB_MEMTYPE_MAX 1 - -enum omapfb_color_format { - OMAPFB_COLOR_RGB565 = 0, - OMAPFB_COLOR_YUV422, - OMAPFB_COLOR_YUV420, - OMAPFB_COLOR_CLUT_8BPP, - OMAPFB_COLOR_CLUT_4BPP, - OMAPFB_COLOR_CLUT_2BPP, - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, -}; - -struct omapfb_update_window { - __u32 x, y; - __u32 width, height; - __u32 format; - __u32 out_x, out_y; - __u32 out_width, out_height; - __u32 reserved[8]; -}; - -struct omapfb_update_window_old { - __u32 x, y; - __u32 width, height; - __u32 format; -}; - -enum omapfb_plane { - OMAPFB_PLANE_GFX = 0, - OMAPFB_PLANE_VID1, - OMAPFB_PLANE_VID2, -}; - -enum omapfb_channel_out { - OMAPFB_CHANNEL_OUT_LCD = 0, - OMAPFB_CHANNEL_OUT_DIGIT, -}; - -struct omapfb_plane_info { - __u32 pos_x; - __u32 pos_y; - __u8 enabled; - __u8 channel_out; - __u8 mirror; - __u8 reserved1; - __u32 out_width; - __u32 out_height; - __u32 reserved2[12]; -}; - -struct omapfb_mem_info { - __u32 size; - __u8 type; - __u8 reserved[3]; -}; - -struct omapfb_caps { - __u32 ctrl; - __u32 plane_color; - __u32 wnd_color; -}; - -enum omapfb_color_key_type { - OMAPFB_COLOR_KEY_DISABLED = 0, - OMAPFB_COLOR_KEY_GFX_DST, - OMAPFB_COLOR_KEY_VID_SRC, -}; - -struct omapfb_color_key { - __u8 channel_out; - __u32 background; - __u32 trans_key; - __u8 key_type; -}; - -enum omapfb_update_mode { - OMAPFB_UPDATE_DISABLED = 0, - OMAPFB_AUTO_UPDATE, - OMAPFB_MANUAL_UPDATE -}; - -#ifdef __KERNEL__ - -#include <linux/completion.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/mutex.h> - -#include <plat/board.h> - -#define OMAP_LCDC_INV_VSYNC 0x0001 -#define OMAP_LCDC_INV_HSYNC 0x0002 -#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 -#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 -#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 -#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 - -#define OMAP_LCDC_SIGNAL_MASK 0x003f - -#define OMAP_LCDC_PANEL_TFT 0x0100 - -#define OMAPFB_PLANE_XRES_MIN 8 -#define OMAPFB_PLANE_YRES_MIN 8 - -#ifdef CONFIG_ARCH_OMAP1 -#define OMAPFB_PLANE_NUM 1 -#else -#define OMAPFB_PLANE_NUM 3 -#endif - -struct omapfb_device; - -struct lcd_panel { - const char *name; - int config; /* TFT/STN, signal inversion */ - int bpp; /* Pixel format in fb mem */ - int data_lines; /* Lines on LCD HW interface */ - - int x_res, y_res; - int pixel_clock; /* In kHz */ - int hsw; /* Horizontal synchronization - pulse width */ - int hfp; /* Horizontal front porch */ - int hbp; /* Horizontal back porch */ - int vsw; /* Vertical synchronization - pulse width */ - int vfp; /* Vertical front porch */ - int vbp; /* Vertical back porch */ - int acb; /* ac-bias pin frequency */ - int pcd; /* pixel clock divider. - Obsolete use pixel_clock instead */ - - int (*init) (struct lcd_panel *panel, - struct omapfb_device *fbdev); - void (*cleanup) (struct lcd_panel *panel); - int (*enable) (struct lcd_panel *panel); - void (*disable) (struct lcd_panel *panel); - unsigned long (*get_caps) (struct lcd_panel *panel); - int (*set_bklight_level)(struct lcd_panel *panel, - unsigned int level); - unsigned int (*get_bklight_level)(struct lcd_panel *panel); - unsigned int (*get_bklight_max) (struct lcd_panel *panel); - int (*run_test) (struct lcd_panel *panel, int test_num); -}; - -struct extif_timings { - int cs_on_time; - int cs_off_time; - int we_on_time; - int we_off_time; - int re_on_time; - int re_off_time; - int we_cycle_time; - int re_cycle_time; - int cs_pulse_width; - int access_time; - - int clk_div; - - u32 tim[5]; /* set by extif->convert_timings */ - - int converted; -}; - -struct lcd_ctrl_extif { - int (*init) (struct omapfb_device *fbdev); - void (*cleanup) (void); - void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); - unsigned long (*get_max_tx_rate)(void); - int (*convert_timings) (struct extif_timings *timings); - void (*set_timings) (const struct extif_timings *timings); - void (*set_bits_per_cycle)(int bpc); - void (*write_command) (const void *buf, unsigned int len); - void (*read_data) (void *buf, unsigned int len); - void (*write_data) (const void *buf, unsigned int len); - void (*transfer_area) (int width, int height, - void (callback)(void * data), void *data); - int (*setup_tearsync) (unsigned pin_cnt, - unsigned hs_pulse_time, unsigned vs_pulse_time, - int hs_pol_inv, int vs_pol_inv, int div); - int (*enable_tearsync) (int enable, unsigned line); - - unsigned long max_transmit_size; -}; - -struct omapfb_notifier_block { - struct notifier_block nb; - void *data; - int plane_idx; -}; - -typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, - unsigned long event, - void *fbi); - -struct omapfb_mem_region { - u32 paddr; - void __iomem *vaddr; - unsigned long size; - u8 type; /* OMAPFB_PLANE_MEM_* */ - unsigned alloc:1; /* allocated by the driver */ - unsigned map:1; /* kernel mapped by the driver */ -}; - -struct omapfb_mem_desc { - int region_cnt; - struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; -}; - -struct lcd_ctrl { - const char *name; - void *data; - - int (*init) (struct omapfb_device *fbdev, - int ext_mode, - struct omapfb_mem_desc *req_md); - void (*cleanup) (void); - void (*bind_client) (struct omapfb_notifier_block *nb); - void (*get_caps) (int plane, struct omapfb_caps *caps); - int (*set_update_mode)(enum omapfb_update_mode mode); - enum omapfb_update_mode (*get_update_mode)(void); - int (*setup_plane) (int plane, int channel_out, - unsigned long offset, - int screen_width, - int pos_x, int pos_y, int width, - int height, int color_mode); - int (*set_rotate) (int angle); - int (*setup_mem) (int plane, size_t size, - int mem_type, unsigned long *paddr); - int (*mmap) (struct fb_info *info, - struct vm_area_struct *vma); - int (*set_scale) (int plane, - int orig_width, int orig_height, - int out_width, int out_height); - int (*enable_plane) (int plane, int enable); - int (*update_window) (struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - void (*sync) (void); - void (*suspend) (void); - void (*resume) (void); - int (*run_test) (int test_num); - int (*setcolreg) (u_int regno, u16 red, u16 green, - u16 blue, u16 transp, - int update_hw_mem); - int (*set_color_key) (struct omapfb_color_key *ck); - int (*get_color_key) (struct omapfb_color_key *ck); -}; - -enum omapfb_state { - OMAPFB_DISABLED = 0, - OMAPFB_SUSPENDED= 99, - OMAPFB_ACTIVE = 100 -}; - -struct omapfb_plane_struct { - int idx; - struct omapfb_plane_info info; - enum omapfb_color_format color_mode; - struct omapfb_device *fbdev; -}; - -struct omapfb_device { - int state; - int ext_lcdc; /* Using external - LCD controller */ - struct mutex rqueue_mutex; - - int palette_size; - u32 pseudo_palette[17]; - - struct lcd_panel *panel; /* LCD panel */ - const struct lcd_ctrl *ctrl; /* LCD controller */ - const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ - struct lcd_ctrl_extif *ext_if; /* LCD ctrl external - interface */ - struct device *dev; - struct fb_var_screeninfo new_var; /* for mode changes */ - - struct omapfb_mem_desc mem_desc; - struct fb_info *fb_info[OMAPFB_PLANE_NUM]; -}; - -struct omapfb_platform_data { - struct omap_lcd_config lcd; - struct omapfb_mem_desc mem_desc; - void *ctrl_platform_data; -}; - -#ifdef CONFIG_ARCH_OMAP1 -extern struct lcd_ctrl omap1_lcd_ctrl; -#else -extern struct lcd_ctrl omap2_disp_ctrl; -#endif - -extern void omapfb_reserve_sdram(void); -extern void omapfb_register_panel(struct lcd_panel *panel); -extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); -extern void omapfb_notify_clients(struct omapfb_device *fbdev, - unsigned long event); -extern int omapfb_register_client(struct omapfb_notifier_block *nb, - omapfb_notifier_callback_t callback, - void *callback_data); -extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); -extern int omapfb_update_window_async(struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - -/* in arch/arm/plat-omap/fb.c */ -extern void omapfb_set_ctrl_platform_data(void *pdata); - -#endif /* __KERNEL__ */ - -#endif /* __OMAPFB_H */ diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h index 3d45ee1d3cf4..0b960051eaed 100644 --- a/arch/arm/plat-omap/include/plat/powerdomain.h +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -28,6 +28,8 @@ #define PWRDM_POWER_INACTIVE 0x2 #define PWRDM_POWER_ON 0x3 +#define PWRDM_MAX_PWRSTS 4 + /* Powerdomain allowable state bitfields */ #define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ (1 << PWRDM_POWER_ON)) @@ -40,7 +42,10 @@ /* Powerdomain flags */ #define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ - +#define PWRDM_HAS_MPU_QUIRK (1 << 1) /* MPU pwr domain has MEM bank 0 bits + * in MEM bank 1 position. This is + * true for OMAP3430 + */ /* * Number of memory banks that are power-controllable. On OMAP3430, the @@ -85,15 +90,15 @@ struct powerdomain { /* Used to represent the OMAP chip types containing this pwrdm */ const struct omap_chip_id omap_chip; - /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ - const u8 dep_bit; - /* Powerdomains that can be told to wake this powerdomain up */ struct pwrdm_dep *wkdep_srcs; /* Powerdomains that can be told to keep this pwrdm from inactivity */ struct pwrdm_dep *sleepdep_srcs; + /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ + const u8 dep_bit; + /* Possible powerdomain power states */ const u8 pwrsts; @@ -118,11 +123,11 @@ struct powerdomain { struct list_head node; int state; - unsigned state_counter[4]; + unsigned state_counter[PWRDM_MAX_PWRSTS]; #ifdef CONFIG_PM_DEBUG s64 timer; - s64 state_timer[4]; + s64 state_timer[PWRDM_MAX_PWRSTS]; #endif }; diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index f704030d2a70..7b76f50564ba 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -94,7 +94,10 @@ /* SMS register offsets - read/write with sms_{read,write}_reg() */ -#define SMS_SYSCONFIG 0x010 +#define SMS_SYSCONFIG 0x010 +#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) +#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) +#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) /* REVISIT: fill in other SMS registers here */ @@ -129,6 +132,10 @@ int omap2_sdrc_get_params(unsigned long r, void omap2_sms_save_context(void); void omap2_sms_restore_context(void); +void omap2_sms_write_rot_control(u32 val, unsigned ctx); +void omap2_sms_write_rot_size(u32 val, unsigned ctx); +void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); + #ifdef CONFIG_ARCH_OMAP2 struct memory_timings { diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 9951345a25d6..f5a4a92393ef 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -53,6 +53,7 @@ #ifndef __ASSEMBLER__ extern void __init omap_serial_early_init(void); extern void omap_serial_init(void); +extern void omap_serial_init_port(int port); extern int omap_uart_can_sleep(void); extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index dcaa8fde7063..8983d54c4fd2 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -28,6 +28,8 @@ /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); +extern void omap_auxcoreboot_addr(u32 cpu_addr); /* * We use Soft IRQ1 as the IPI diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h new file mode 100644 index 000000000000..edd4987758a6 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/vram.h @@ -0,0 +1,62 @@ +/* + * VRAM manager for OMAP + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAP_VRAM_H__ +#define __OMAP_VRAM_H__ + +#include <linux/types.h> + +#define OMAP_VRAM_MEMTYPE_SDRAM 0 +#define OMAP_VRAM_MEMTYPE_SRAM 1 +#define OMAP_VRAM_MEMTYPE_MAX 1 + +extern int omap_vram_add_region(unsigned long paddr, size_t size); +extern int omap_vram_free(unsigned long paddr, size_t size); +extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); +extern int omap_vram_reserve(unsigned long paddr, size_t size); +extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, + unsigned long *largest_free_block); + +#ifdef CONFIG_OMAP2_VRAM +extern void omap_vram_set_sdram_vram(u32 size, u32 start); +extern void omap_vram_set_sram_vram(u32 size, u32 start); + +extern void omap_vram_reserve_sdram(void); +extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail); +#else +static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } +static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } + +static inline void omap_vram_reserve_sdram(void) { } +static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h new file mode 100644 index 000000000000..d8a03ced3b10 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/vrfb.h @@ -0,0 +1,50 @@ +/* + * VRFB Rotation Engine + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAP_VRFB_H__ +#define __OMAP_VRFB_H__ + +#define OMAP_VRFB_LINE_LEN 2048 + +struct vrfb { + u8 context; + void __iomem *vaddr[4]; + unsigned long paddr[4]; + u16 xres; + u16 yres; + u16 xoffset; + u16 yoffset; + u8 bytespp; + bool yuv_mode; +}; + +extern int omap_vrfb_request_ctx(struct vrfb *vrfb); +extern void omap_vrfb_release_ctx(struct vrfb *vrfb); +extern void omap_vrfb_adjust_size(u16 *width, u16 *height, + u8 bytespp); +extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); +extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); +extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + u16 width, u16 height, + unsigned bytespp, bool yuv_mode); +extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); +extern void omap_vrfb_restore_context(void); + +#endif /* __VRFB_H */ diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 05aebcad215b..06703635ace1 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index) { struct pin_config *reg; - if (cpu_is_omap44xx()) - return 0; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", + index); + WARN_ON(1); + return -EINVAL; + } if (mux_cfg == NULL) { printk(KERN_ERR "Pin mux table not initialized\n"); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index bb16e624a557..1e5648d3e3d8 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -134,18 +134,18 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) break; - getnstimeofday(&a); + read_persistent_clock(&a); /* XXX check return code */ odpl->activate_func(od); - getnstimeofday(&b); + read_persistent_clock(&b); c = timespec_sub(b, a); - act_lat = timespec_to_ns(&c) * NSEC_PER_USEC; + act_lat = timespec_to_ns(&c); pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " - "%llu usec\n", od->pdev.name, od->pm_lat_level, + "%llu nsec\n", od->pdev.name, od->pm_lat_level, act_lat); WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: " @@ -190,18 +190,18 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) od->_dev_wakeup_lat_limit)) break; - getnstimeofday(&a); + read_persistent_clock(&a); /* XXX check return code */ odpl->deactivate_func(od); - getnstimeofday(&b); + read_persistent_clock(&b); c = timespec_sub(b, a); - deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC; + deact_lat = timespec_to_ns(&c); pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " - "%llu usec\n", od->pdev.name, od->pm_lat_level, + "%llu nsec\n", od->pdev.name, od->pm_lat_level, deact_lat); WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: " @@ -459,7 +459,7 @@ int omap_device_enable(struct platform_device *pdev) ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT); od->dev_wakeup_lat = 0; - od->_dev_wakeup_lat_limit = INT_MAX; + od->_dev_wakeup_lat_limit = UINT_MAX; od->_state = OMAP_DEVICE_STATE_ENABLED; return ret; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 3e923668778d..d8d5094b37ed 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -28,6 +28,7 @@ #include <plat/sram.h> #include <plat/board.h> #include <plat/cpu.h> +#include <plat/vram.h> #include <plat/control.h> @@ -47,8 +48,10 @@ #define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) -#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ -#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ +#define OMAP4_SRAM_PA 0x40300000 +#define OMAP4_SRAM_VA 0xfe400000 +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -139,6 +142,10 @@ void __init omap_detect_sram(void) } else { omap_sram_size = 0x8000; /* 32K */ } + } else if (cpu_is_omap44xx()) { + omap_sram_base = OMAP4_SRAM_PUB_VA; + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; @@ -152,7 +159,7 @@ void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_base = OMAP4_SRAM_VA; omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0x8000; /* 32K */ + omap_sram_size = 0xe000; /* 56K */ } else { omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; @@ -185,6 +192,13 @@ void __init omap_detect_sram(void) omap_sram_start + SRAM_BOOTLOADER_SZ, omap_sram_size - SRAM_BOOTLOADER_SZ); omap_sram_size -= reserved; + + reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base, + omap_sram_size, + omap_sram_start + SRAM_BOOTLOADER_SZ, + omap_sram_size - SRAM_BOOTLOADER_SZ); + omap_sram_size -= reserved; + omap_sram_ceil = omap_sram_base + omap_sram_size; } diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 51033a4503c3..d3bf17cd36f3 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -137,7 +137,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) if (is_device) { if (cpu_is_omap24xx()) omap_cfg_reg(J20_24XX_USB0_PUEN); - else + else if (cpu_is_omap7xx()) { + omap_cfg_reg(AA17_7XX_USB_DM); + omap_cfg_reg(W16_7XX_USB_PU_EN); + omap_cfg_reg(W17_7XX_USB_VBUSI); + omap_cfg_reg(W18_7XX_USB_DMCK_OUT); + omap_cfg_reg(W19_7XX_USB_DCRST); + } else omap_cfg_reg(W4_USB_PUEN); } diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index e139a72c2149..9e9d0286e48f 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/plat-s3c/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c index 4fdc5b307fd2..ef019f27b67d 100644 --- a/arch/arm/plat-s3c/pwm.c +++ b/arch/arm/plat-s3c/pwm.c @@ -368,7 +368,7 @@ static int s3c_pwm_probe(struct platform_device *pdev) return ret; } -static int s3c_pwm_remove(struct platform_device *pdev) +static int __devexit s3c_pwm_remove(struct platform_device *pdev) { struct pwm_device *pwm = platform_get_drvdata(pdev); diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 20fbf936bb93..342647eb91d8 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/plat-s3c24xx/Kconfig -# # Copyright 2007 Simtec Electronics # # Licensed under GPLv2 diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index df47322492d5..ce47627f3368 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -365,7 +365,7 @@ static int s3c_adc_probe(struct platform_device *pdev) return ret; } -static int s3c_adc_remove(struct platform_device *pdev) +static int __devexit s3c_adc_remove(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index f65192d5b1d7..f0ea7943ac5a 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1403,11 +1403,13 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) ord = &dma_order->channels[channel]; for (ch = 0; ch < dma_channels; ch++) { + int tmp; if (!is_channel_valid(ord->list[ch])) continue; - if (s3c2410_chans[ord->list[ch]].in_use == 0) { - ch = ord->list[ch] & ~DMA_CH_VALID; + tmp = ord->list[ch] & ~DMA_CH_VALID; + if (s3c2410_chans[tmp].in_use == 0) { + ch = tmp; goto found; } } diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index c4d133436fc7..bd534d32b993 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -64,7 +64,7 @@ /* the calculation for the VA of this must ensure that * it is the same distance apart from the UART in the * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 maping. This puts it (currently) at + * is done as a 1:1 mapping. This puts it (currently) at * 0xFA800000, which is not in the way of any current mapping * by the base system. */ diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index ef0f521437d7..ad0d44ef1f93 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -522,6 +522,8 @@ int s3c24xx_set_fiq(unsigned int irq, bool on) __raw_writel(intmod, S3C2410_INTMOD); return 0; } + +EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); #endif diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig index bcfa778614d8..e6da87a5885c 100644 --- a/arch/arm/plat-s3c64xx/Kconfig +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/plat-s3c64xx/Kconfig -# # Copyright 2008 Openmoko, Inc. # Copyright 2008 Simtec Electronics # Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig index 1608e62b0c9d..b7b9e91c0243 100644 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -1,5 +1,3 @@ -# arch/arm/plat-s5pc1xx/Kconfig -# # Copyright 2009 Samsung Electronics Co. # Byungho Min <bhmin@samsung.com> # diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig index fda2331f9789..5c13d785cc70 100644 --- a/arch/avr32/boards/hammerhead/Kconfig +++ b/arch/avr32/boards/hammerhead/Kconfig @@ -24,7 +24,7 @@ config BOARD_HAMMERHEAD_SND bool "Atmel AC97 Sound support" help This enables Sound support for the Hammerhead board. You may - also go trough the ALSA settings to get it working. + also go through the ALSA settings to get it working. Choose 'Y' here if you have ordered a Corona daugther board and want to make your board funky. diff --git a/arch/avr32/include/asm/syscalls.h b/arch/avr32/include/asm/syscalls.h index 483d666c27c0..66a197266637 100644 --- a/arch/avr32/include/asm/syscalls.h +++ b/arch/avr32/include/asm/syscalls.h @@ -29,10 +29,6 @@ asmlinkage int sys_sigaltstack(const stack_t __user *, stack_t __user *, struct pt_regs *); asmlinkage int sys_rt_sigreturn(struct pt_regs *); -/* kernel/sys_avr32.c */ -asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, off_t); - /* mm/cache.c */ asmlinkage int sys_cacheflush(int, void __user *, size_t); diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c index 5d2daeaf356f..459349b5ed5a 100644 --- a/arch/avr32/kernel/sys_avr32.c +++ b/arch/avr32/kernel/sys_avr32.c @@ -5,39 +5,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/file.h> -#include <linux/mm.h> #include <linux/unistd.h> -#include <asm/mman.h> -#include <asm/uaccess.h> -#include <asm/syscalls.h> - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset) -{ - int error = -EBADF; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - return error; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, offset); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - return error; -} - int kernel_execve(const char *file, char **argv, char **envp) { register long scno asm("r8") = __NR_execve; diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S index f7244cd02fbb..0447a3e2ba64 100644 --- a/arch/avr32/kernel/syscall-stubs.S +++ b/arch/avr32/kernel/syscall-stubs.S @@ -61,7 +61,7 @@ __sys_execve: __sys_mmap2: pushm lr st.w --sp, ARG6 - call sys_mmap2 + call sys_mmap_pgoff sub sp, -4 popm pc diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/asm/fcntl.h index 8727b2b382f1..251c911d59c1 100644 --- a/arch/blackfin/include/asm/fcntl.h +++ b/arch/blackfin/include/asm/fcntl.h @@ -7,8 +7,6 @@ #ifndef _BFIN_FCNTL_H #define _BFIN_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ #define O_DIRECTORY 040000 /* must be a directory */ #define O_NOFOLLOW 0100000 /* don't follow links */ #define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 5cc7e2e9e415..45876427eb2d 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -215,22 +215,18 @@ copy_thread(unsigned long clone_flags, /* * sys_execve() executes a new program. */ - asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp) { int error; char *filename; struct pt_regs *regs = (struct pt_regs *)((&name) + 6); - lock_kernel(); filename = getname(name); error = PTR_ERR(filename); if (IS_ERR(filename)) - goto out; + return error; error = do_execve(filename, argv, envp, regs); putname(filename); - out: - unlock_kernel(); return error; } diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index afcef129d4e8..2e7f8e10bf87 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -22,39 +22,6 @@ #include <asm/cacheflush.h> #include <asm/dma.h> -/* common code for old and new mmaps */ -static inline long -do_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - out: - return error; -} - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - return do_mmap2(addr, len, prot, flags, fd, pgoff); -} - asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags) { return sram_alloc_with_lsl(size, flags); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 6b7325d634af..78cb3d38f899 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -619,7 +619,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) /* * Similar to get_user, do some address checking, then dereference - * Return true on sucess, false on bad address + * Return true on success, false on bad address */ static bool get_instruction(unsigned short *val, unsigned short *address) { diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index e06f4112c695..f9fd2b2a2956 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -542,7 +542,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -550,7 +550,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index f821700716ee..b9dbb73d7ef0 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -544,7 +544,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -552,7 +552,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index cebb14feb1ba..a6d20ca57683 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -934,7 +934,7 @@ #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ @@ -942,7 +942,7 @@ #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index dd414ae4ba4c..39f588dcd382 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -491,7 +491,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -501,7 +501,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 5a9dbabe0a68..c4dcf302d9f5 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -470,7 +470,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -480,7 +480,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h index 82cd593f7391..a5079980968c 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -853,7 +853,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -863,7 +863,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h index 6fc6e39ab61b..f7f043560c6f 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -1024,7 +1024,7 @@ #define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ #define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ #define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */ #define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ #define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ #define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ @@ -1034,7 +1034,7 @@ #define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ #define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ #define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */ #define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ #define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ #define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index a50637a8b9bd..f3f8bb46b517 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1422,7 +1422,7 @@ ENTRY(_sys_call_table) .long _sys_ni_syscall /* streams2 */ .long _sys_vfork /* 190 */ .long _sys_getrlimit - .long _sys_mmap2 + .long _sys_mmap_pgoff .long _sys_truncate64 .long _sys_ftruncate64 .long _sys_stat64 /* 195 */ diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c index 087a2096f221..ed60588f8467 100644 --- a/arch/cris/arch-v10/mm/fault.c +++ b/arch/cris/arch-v10/mm/fault.c @@ -80,8 +80,7 @@ handle_mmu_bus_fault(struct pt_regs *regs) * do_page_fault may have flushed the TLB so we have to restore * the MMU registers. */ - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); pmd = (pmd_t *)(pgd + pgd_index(address)); if (pmd_none(*pmd)) goto exit; diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c index 4a496e4ffacc..21d78c599bab 100644 --- a/arch/cris/arch-v10/mm/tlb.c +++ b/arch/cris/arch-v10/mm/tlb.c @@ -134,28 +134,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) local_irq_restore(flags); } -/* dump the entire TLB for debug purposes */ - -#if 0 -void -dump_tlb_all(void) -{ - int i; - unsigned long flags; - - printk("TLB dump. LO is: pfn | reserved | global | valid | kernel | we |\n"); - - local_save_flags(flags); - local_irq_disable(); - for(i = 0; i < NUM_TLB_ENTRIES; i++) { - *R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) ); - printk("Entry %d: HI 0x%08lx, LO 0x%08lx\n", - i, *R_TLB_HI, *R_TLB_LO); - } - local_irq_restore(flags); -} -#endif - /* * Initialize the context related info for a new mm_struct * instance. diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c index 2ad962c7e88e..c2bbb1ac98a9 100644 --- a/arch/cris/kernel/sys_cris.c +++ b/arch/cris/kernel/sys_cris.c @@ -26,31 +26,6 @@ #include <asm/uaccess.h> #include <asm/segment.h> -/* common code for old and new mmaps */ -static inline long -do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage unsigned long old_mmap(unsigned long __user *args) { unsigned long buffer[6]; @@ -63,7 +38,7 @@ asmlinkage unsigned long old_mmap(unsigned long __user *args) if (buffer[5] & ~PAGE_MASK) /* verify that offset is on page boundary */ goto out; - err = do_mmap2(buffer[0], buffer[1], buffer[2], buffer[3], + err = sys_mmap_pgoff(buffer[0], buffer[1], buffer[2], buffer[3], buffer[4], buffer[5] >> PAGE_SHIFT); out: return err; @@ -73,7 +48,8 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - return do_mmap2(addr, len, prot, flags, fd, pgoff); + /* bug(?): 8Kb pages here */ + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); } /* diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 4a7cdd9ea1ee..380df1a73a6e 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -209,7 +209,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs, /* Are we prepared to handle this kernel fault? * * (The kernel has valid exception-points in the source - * when it acesses user-memory. When it fails in one + * when it accesses user-memory. When it fails in one * of those points, we find it in a table and do a jump * to some fixup code that loads an appropriate error * code) diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index 904255938216..21d0fd19276d 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -255,15 +255,12 @@ asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __ int error; char * filename; - lock_kernel(); filename = getname(name); error = PTR_ERR(filename); if (IS_ERR(filename)) - goto out; + return error; error = do_execve(filename, argv, envp, __frame); putname(filename); - out: - unlock_kernel(); return error; } diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c index 2b6b5289cdcc..1d3d4c9e2521 100644 --- a/arch/frv/kernel/sys_frv.c +++ b/arch/frv/kernel/sys_frv.c @@ -31,9 +31,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - int error = -EBADF; - struct file * file = NULL; - /* As with sparc32, make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE we have.... */ @@ -41,69 +38,10 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, trying to map something we can't */ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1)) return -EINVAL; - pgoff >>= PAGE_SHIFT - 12; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - -#if 0 /* DAVIDM - do we want this */ -struct mmap_arg_struct64 { - __u32 addr; - __u32 len; - __u32 prot; - __u32 flags; - __u64 offset; /* 64 bits */ - __u32 fd; -}; - -asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg) -{ - int error = -EFAULT; - struct file * file = NULL; - struct mmap_arg_struct64 a; - unsigned long pgoff; - - if (copy_from_user(&a, arg, sizeof(a))) - return -EFAULT; - - if ((long)a.offset & ~PAGE_MASK) - return -EINVAL; - - pgoff = a.offset >> PAGE_SHIFT; - if ((a.offset >> PAGE_SHIFT) != pgoff) - return -EINVAL; - - if (!(a.flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(a.fd); - if (!file) - goto out; - } - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); -out: - return error; + return sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); } -#endif /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index e2f33d0f9969..bd883faa983d 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -218,15 +218,12 @@ asmlinkage int sys_execve(char *name, char **argv, char **envp,int dummy,...) char * filename; struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4); - lock_kernel(); filename = getname(name); error = PTR_ERR(filename); if (IS_ERR(filename)) - goto out; + return error; error = do_execve(filename, argv, envp, regs); putname(filename); -out: - unlock_kernel(); return error; } diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c index 8cb5d73a0e35..b5969db0ca10 100644 --- a/arch/h8300/kernel/sys_h8300.c +++ b/arch/h8300/kernel/sys_h8300.c @@ -26,39 +26,6 @@ #include <asm/traps.h> #include <asm/unistd.h> -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - return do_mmap2(addr, len, prot, flags, fd, pgoff); -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to @@ -87,57 +54,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct *arg) if (a.offset & ~PAGE_MASK) goto out; - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); -out: - return error; -} - -#if 0 /* DAVIDM - do we want this */ -struct mmap_arg_struct64 { - __u32 addr; - __u32 len; - __u32 prot; - __u32 flags; - __u64 offset; /* 64 bits */ - __u32 fd; -}; - -asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg) -{ - int error = -EFAULT; - struct file * file = NULL; - struct mmap_arg_struct64 a; - unsigned long pgoff; - - if (copy_from_user(&a, arg, sizeof(a))) - return -EFAULT; - - if ((long)a.offset & ~PAGE_MASK) - return -EINVAL; - - pgoff = a.offset >> PAGE_SHIFT; - if ((a.offset >> PAGE_SHIFT) != pgoff) - return -EINVAL; - - if (!(a.flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(a.fd); - if (!file) - goto out; - } - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); out: return error; } -#endif struct sel_arg_struct { unsigned long n; diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S index 4eb67faac633..2d69881eda6a 100644 --- a/arch/h8300/kernel/syscalls.S +++ b/arch/h8300/kernel/syscalls.S @@ -206,7 +206,7 @@ SYMBOL_NAME_LABEL(sys_call_table) .long SYMBOL_NAME(sys_ni_syscall) /* streams2 */ .long SYMBOL_NAME(sys_vfork) /* 190 */ .long SYMBOL_NAME(sys_getrlimit) - .long SYMBOL_NAME(sys_mmap2) + .long SYMBOL_NAME(sys_mmap_pgoff) .long SYMBOL_NAME(sys_truncate64) .long SYMBOL_NAME(sys_ftruncate64) .long SYMBOL_NAME(sys_stat64) /* 195 */ diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 674a8374c6d9..f332e3fe4237 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1381,7 +1381,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev, #endif /* - ** Not virtually contigous. + ** Not virtually contiguous. ** Terminate prev chunk. ** Start a new chunk. ** diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 10c37510f4b4..2fd7479aa216 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -79,7 +79,7 @@ GLOBAL_ENTRY(ia32_ret_from_clone) (p6) br.cond.spnt .ia32_strace_check_retval ;; // prevent RAW on r8 END(ia32_ret_from_clone) - // fall thrugh + // fall through GLOBAL_ENTRY(ia32_ret_from_syscall) PT_REGS_UNWIND_INFO(0) diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 429ec968c9ee..045b746b9808 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -858,6 +858,9 @@ ia32_do_mmap (struct file *file, unsigned long addr, unsigned long len, int prot prot = get_prot32(prot); + if (flags & MAP_HUGETLB) + return -ENOMEM; + #if PAGE_SHIFT > IA32_PAGE_SHIFT mutex_lock(&ia32_mmap_mutex); { diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h index 48822c0811d8..74724b24c2b7 100644 --- a/arch/ia64/include/asm/perfmon_default_smpl.h +++ b/arch/ia64/include/asm/perfmon_default_smpl.h @@ -67,7 +67,7 @@ typedef struct { unsigned long ip; /* where did the overflow interrupt happened */ unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */ - unsigned short cpu; /* cpu on which the overfow occured */ + unsigned short cpu; /* cpu on which the overflow occured */ unsigned short set; /* event set active when overflow ocurred */ int tgid; /* thread group id (for NPTL, this is getpid()) */ } pfm_default_smpl_entry_t; diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h index 22a6f18a5313..6052422a22b3 100644 --- a/arch/ia64/include/asm/sn/shubio.h +++ b/arch/ia64/include/asm/sn/shubio.h @@ -3289,7 +3289,7 @@ typedef ii_icrb0_e_u_t icrbe_t; #define IIO_IIDSR_LVL_SHIFT 0 #define IIO_IIDSR_LVL_MASK 0x000000ff -/* Xtalk timeout threshhold register (IIO_IXTT) */ +/* Xtalk timeout threshold register (IIO_IXTT) */ #define IXTT_RRSP_TO_SHFT 55 /* read response timeout */ #define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT) #define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */ diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 9c72e36c5281..10a8f21ca9e3 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -311,7 +311,7 @@ #define __NR_preadv 1319 #define __NR_pwritev 1320 #define __NR_rt_tgsigqueueinfo 1321 -#define __NR_rt_recvmmsg 1322 +#define __NR_recvmmsg 1322 #ifdef __KERNEL__ diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h index 88afb54501e4..67455c2ed2b1 100644 --- a/arch/ia64/include/asm/xen/hypervisor.h +++ b/arch/ia64/include/asm/xen/hypervisor.h @@ -37,35 +37,9 @@ #include <xen/interface/xen.h> #include <xen/interface/version.h> /* to compile feature.c */ #include <xen/features.h> /* to comiple xen-netfront.c */ +#include <xen/xen.h> #include <asm/xen/hypercall.h> -/* xen_domain_type is set before executing any C code by early_xen_setup */ -enum xen_domain_type { - XEN_NATIVE, /* running on bare hardware */ - XEN_PV_DOMAIN, /* running in a PV domain */ - XEN_HVM_DOMAIN, /* running in a Xen hvm domain*/ -}; - -#ifdef CONFIG_XEN -extern enum xen_domain_type xen_domain_type; -#else -#define xen_domain_type XEN_NATIVE -#endif - -#define xen_domain() (xen_domain_type != XEN_NATIVE) -#define xen_pv_domain() (xen_domain() && \ - xen_domain_type == XEN_PV_DOMAIN) -#define xen_hvm_domain() (xen_domain() && \ - xen_domain_type == XEN_HVM_DOMAIN) - -#ifdef CONFIG_XEN_DOM0 -#define xen_initial_domain() (xen_pv_domain() && \ - (xen_start_info->flags & SIF_INITDOMAIN)) -#else -#define xen_initial_domain() (0) -#endif - - #ifdef CONFIG_XEN extern struct shared_info *HYPERVISOR_shared_info; extern struct start_info *xen_start_info; diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c index d5764a3d74af..b091111270cb 100644 --- a/arch/ia64/kernel/esi.c +++ b/arch/ia64/kernel/esi.c @@ -84,7 +84,7 @@ static int __init esi_init (void) case ESI_DESC_ENTRY_POINT: break; default: - printk(KERN_WARNING "Unkown table type %d found in " + printk(KERN_WARNING "Unknown table type %d found in " "ESI table, ignoring rest of table\n", *p); return -ENODEV; } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 402698b6689f..599b233bef75 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -3517,7 +3517,7 @@ pfm_use_debug_registers(struct task_struct *task) * IA64_THREAD_DBG_VALID set. This indicates a task which was * able to use the debug registers for debugging purposes via * ptrace(). Therefore we know it was not using them for - * perfmormance monitoring, so we only decrement the number + * performance monitoring, so we only decrement the number * of "ptraced" debug register users to keep the count up to date */ int diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c index 92ed83f34036..609d50056a6c 100644 --- a/arch/ia64/kernel/sys_ia64.c +++ b/arch/ia64/kernel/sys_ia64.c @@ -100,51 +100,7 @@ sys_getpagesize (void) asmlinkage unsigned long ia64_brk (unsigned long brk) { - unsigned long rlim, retval, newbrk, oldbrk; - struct mm_struct *mm = current->mm; - - /* - * Most of this replicates the code in sys_brk() except for an additional safety - * check and the clearing of r8. However, we can't call sys_brk() because we need - * to acquire the mmap_sem before we can do the test... - */ - down_write(&mm->mmap_sem); - - if (brk < mm->end_code) - goto out; - newbrk = PAGE_ALIGN(brk); - oldbrk = PAGE_ALIGN(mm->brk); - if (oldbrk == newbrk) - goto set_brk; - - /* Always allow shrinking brk. */ - if (brk <= mm->brk) { - if (!do_munmap(mm, newbrk, oldbrk-newbrk)) - goto set_brk; - goto out; - } - - /* Check against unimplemented/unmapped addresses: */ - if ((newbrk - oldbrk) > RGN_MAP_LIMIT || REGION_OFFSET(newbrk) > RGN_MAP_LIMIT) - goto out; - - /* Check against rlimit.. */ - rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur; - if (rlim < RLIM_INFINITY && brk - mm->start_data > rlim) - goto out; - - /* Check against existing mmap mappings. */ - if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE)) - goto out; - - /* Ok, looks good - let it rip. */ - if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) - goto out; -set_brk: - mm->brk = brk; -out: - retval = mm->brk; - up_write(&mm->mmap_sem); + unsigned long retval = sys_brk(brk); force_successful_syscall_return(); return retval; } @@ -185,39 +141,6 @@ int ia64_mmap_check(unsigned long addr, unsigned long len, return 0; } -static inline unsigned long -do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, unsigned long pgoff) -{ - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - return -EBADF; - - if (!file->f_op || !file->f_op->mmap) { - addr = -ENODEV; - goto out; - } - } - - /* Careful about overflows.. */ - len = PAGE_ALIGN(len); - if (!len || len > TASK_SIZE) { - addr = -EINVAL; - goto out; - } - - down_write(¤t->mm->mmap_sem); - addr = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - -out: if (file) - fput(file); - return addr; -} - /* * mmap2() is like mmap() except that the offset is expressed in units * of PAGE_SIZE (instead of bytes). This allows to mmap2() (pieces @@ -226,7 +149,7 @@ out: if (file) asmlinkage unsigned long sys_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, long pgoff) { - addr = do_mmap2(addr, len, prot, flags, fd, pgoff); + addr = sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); if (!IS_ERR((void *) addr)) force_successful_syscall_return(); return addr; @@ -238,7 +161,7 @@ sys_mmap (unsigned long addr, unsigned long len, int prot, int flags, int fd, lo if (offset_in_page(off) != 0) return -EINVAL; - addr = do_mmap2(addr, len, prot, flags, fd, off >> PAGE_SHIFT); + addr = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); if (!IS_ERR((void *) addr)) force_successful_syscall_return(); return addr; diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 4990495d7531..a35c661e5e89 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -473,7 +473,7 @@ void update_vsyscall_tz(void) { } -void update_vsyscall(struct timespec *wall, struct clocksource *c) +void update_vsyscall(struct timespec *wall, struct clocksource *c, u32 mult) { unsigned long flags; @@ -481,7 +481,7 @@ void update_vsyscall(struct timespec *wall, struct clocksource *c) /* copy fsyscall clock data */ fsyscall_gtod_data.clk_mask = c->mask; - fsyscall_gtod_data.clk_mult = c->mult; + fsyscall_gtod_data.clk_mult = mult; fsyscall_gtod_data.clk_shift = c->shift; fsyscall_gtod_data.clk_fsys_mmio = c->fsys_mmio; fsyscall_gtod_data.clk_cycle_last = c->cycle_last; diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index c0fca2c1c858..df639db779f9 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -131,6 +131,7 @@ alloc_pci_controller (int seg) } struct pci_root_info { + struct acpi_device *bridge; struct pci_controller *controller; char *name; }; @@ -297,9 +298,20 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) window->offset = offset; if (insert_resource(root, &window->resource)) { - printk(KERN_ERR "alloc 0x%llx-0x%llx from %s for %s failed\n", - window->resource.start, window->resource.end, - root->name, info->name); + dev_err(&info->bridge->dev, + "can't allocate host bridge window %pR\n", + &window->resource); + } else { + if (offset) + dev_info(&info->bridge->dev, "host bridge window %pR " + "(PCI address [%#llx-%#llx])\n", + &window->resource, + window->resource.start - offset, + window->resource.end - offset); + else + dev_info(&info->bridge->dev, + "host bridge window %pR\n", + &window->resource); } return AE_OK; @@ -319,8 +331,9 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) (res->end - res->start < 16)) continue; if (j >= PCI_BUS_NUM_RESOURCES) { - printk("Ignoring range [%#llx-%#llx] (%lx)\n", - res->start, res->end, res->flags); + dev_warn(&bus->dev, + "ignoring host bridge window %pR (no space)\n", + res); continue; } bus->resource[j++] = res; @@ -364,6 +377,7 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) goto out3; sprintf(name, "PCI Bus %04x:%02x", domain, bus); + info.bridge = device; info.controller = controller; info.name = name; acpi_walk_resources(device->handle, METHOD_NAME__CRS, @@ -720,9 +734,6 @@ int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) return ret; } -/* It's defined in drivers/pci/pci.c */ -extern u8 pci_cache_line_size; - /** * set_pci_cacheline_size - determine cacheline size for PCI devices * @@ -731,7 +742,7 @@ extern u8 pci_cache_line_size; * * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info(). */ -static void __init set_pci_cacheline_size(void) +static void __init set_pci_dfl_cacheline_size(void) { unsigned long levels, unique_caches; long status; @@ -751,7 +762,7 @@ static void __init set_pci_cacheline_size(void) "(status=%ld)\n", __func__, status); return; } - pci_cache_line_size = (1 << cci.pcci_line_size) / 4; + pci_dfl_cache_line_size = (1 << cci.pcci_line_size) / 4; } u64 ia64_dma_get_required_mask(struct device *dev) @@ -782,7 +793,7 @@ EXPORT_SYMBOL_GPL(dma_get_required_mask); static int __init pcibios_init(void) { - set_pci_cacheline_size(); + set_pci_dfl_cacheline_size(); return 0; } diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c index fd50ff94302b..66f633bff059 100644 --- a/arch/ia64/sn/kernel/io_acpi_init.c +++ b/arch/ia64/sn/kernel/io_acpi_init.c @@ -390,7 +390,7 @@ sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info, pcidev_match.handle = NULL; acpi_walk_namespace(ACPI_TYPE_DEVICE, rootbus_handle, ACPI_UINT32_MAX, - find_matching_device, &pcidev_match, NULL); + find_matching_device, NULL, &pcidev_match, NULL); if (!pcidev_match.handle) { printk(KERN_ERR diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c index 305ac852bbed..d3c865c5a6ba 100644 --- a/arch/m32r/kernel/sys_m32r.c +++ b/arch/m32r/kernel/sys_m32r.c @@ -76,30 +76,6 @@ asmlinkage int sys_tas(int __user *addr) return oldval; } -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. * diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S index aa3bf4cfab37..60536e271233 100644 --- a/arch/m32r/kernel/syscall_table.S +++ b/arch/m32r/kernel/syscall_table.S @@ -191,7 +191,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap_pgoff .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S index 6c1a9a217887..73613b5f1ee5 100644 --- a/arch/m68k/ifpsp060/src/fpsp.S +++ b/arch/m68k/ifpsp060/src/fpsp.S @@ -753,7 +753,7 @@ fovfl_ovfl_on: bra.l _real_ovfl -# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). fovfl_inex_on: @@ -1015,7 +1015,7 @@ funfl_unfl_on2: bra.l _real_unfl -# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). funfl_inex_on: @@ -2963,7 +2963,7 @@ iea_disabled: tst.w %d0 # is instr fmovm? bmi.b iea_dis_fmovm # yes -# instruction is using an extended precision immediate operand. therefore, +# instruction is using an extended precision immediate operand. Therefore, # the total instruction length is 16 bytes. iea_dis_immed: mov.l &0x10,%d0 # 16 bytes of instruction @@ -9624,7 +9624,7 @@ sok_dnrm: bge.b sok_norm2 # thank goodness no # the multiply factor that we're trying to create should be a denorm -# for the multiply to work. therefore, we're going to actually do a +# for the multiply to work. Therefore, we're going to actually do a # multiply with a denorm which will cause an unimplemented data type # exception to be put into the machine which will be caught and corrected # later. we don't do this with the DENORMs above because this method @@ -12216,7 +12216,7 @@ fin_sd_unfl_dis: # # operand will underflow AND underflow or inexact is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fin_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -12746,7 +12746,7 @@ fdiv_zero_load_p: # # The destination was In Range and the source was a ZERO. The result, -# therefore, is an INF w/ the proper sign. +# Therefore, is an INF w/ the proper sign. # So, determine the sign and return a new INF (w/ the j-bit cleared). # global fdiv_inf_load # global for fsgldiv @@ -12996,7 +12996,7 @@ fneg_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fneg_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -13611,7 +13611,7 @@ fabs_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fabs_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -14973,7 +14973,7 @@ fadd_zero_2: # # the ZEROes have opposite signs: -# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. +# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. # - -ZERO is returned in the case of RM. # fadd_zero_2_chk_rm: @@ -15425,7 +15425,7 @@ fsub_zero_2: # # the ZEROes have the same signs: -# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP +# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP # - -ZERO is returned in the case of RM. # fsub_zero_2_chk_rm: @@ -15693,7 +15693,7 @@ fsqrt_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fsqrt_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -21000,7 +21000,7 @@ fout_pack_type: tst.l %d0 bne.b fout_pack_set # "mantissa" is all zero which means that the answer is zero. but, the '040 -# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore, +# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore, # if the mantissa is zero, I will zero the exponent, too. # the question now is whether the exponents sign bit is allowed to be non-zero # for a zero, also... @@ -21743,7 +21743,7 @@ denorm_set_stky: rts # # -# dnrm_lp(): normalize exponent/mantissa to specified threshhold # +# dnrm_lp(): normalize exponent/mantissa to specified threshold # # # # INPUT: # # %a0 : points to the operand to be denormalized # @@ -22402,7 +22402,7 @@ unnorm_shift: bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0 # -# exponent would not go < 0. therefore, number stays normalized +# exponent would not go < 0. Therefore, number stays normalized # sub.w %d0, %d1 # shift exponent value mov.w FTEMP_EX(%a0), %d0 # load old exponent diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S index 51b9f7d879dd..e71ba0ab013c 100644 --- a/arch/m68k/ifpsp060/src/pfpsp.S +++ b/arch/m68k/ifpsp060/src/pfpsp.S @@ -752,7 +752,7 @@ fovfl_ovfl_on: bra.l _real_ovfl -# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). fovfl_inex_on: @@ -1014,7 +1014,7 @@ funfl_unfl_on2: bra.l _real_unfl -# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore, +# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, # we must jump to real_inex(). funfl_inex_on: @@ -2962,7 +2962,7 @@ iea_disabled: tst.w %d0 # is instr fmovm? bmi.b iea_dis_fmovm # yes -# instruction is using an extended precision immediate operand. therefore, +# instruction is using an extended precision immediate operand. Therefore, # the total instruction length is 16 bytes. iea_dis_immed: mov.l &0x10,%d0 # 16 bytes of instruction @@ -5865,7 +5865,7 @@ denorm_set_stky: rts # # -# dnrm_lp(): normalize exponent/mantissa to specified threshhold # +# dnrm_lp(): normalize exponent/mantissa to specified threshold # # # # INPUT: # # %a0 : points to the operand to be denormalized # @@ -6524,7 +6524,7 @@ unnorm_shift: bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0 # -# exponent would not go < 0. therefore, number stays normalized +# exponent would not go < 0. Therefore, number stays normalized # sub.w %d0, %d1 # shift exponent value mov.w FTEMP_EX(%a0), %d0 # load old exponent @@ -7901,7 +7901,7 @@ fout_pack_type: tst.l %d0 bne.b fout_pack_set # "mantissa" is all zero which means that the answer is zero. but, the '040 -# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore, +# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore, # if the mantissa is zero, I will zero the exponent, too. # the question now is whether the exponents sign bit is allowed to be non-zero # for a zero, also... @@ -8647,7 +8647,7 @@ fin_sd_unfl_dis: # # operand will underflow AND underflow or inexact is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fin_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -9177,7 +9177,7 @@ fdiv_zero_load_p: # # The destination was In Range and the source was a ZERO. The result, -# therefore, is an INF w/ the proper sign. +# Therefore, is an INF w/ the proper sign. # So, determine the sign and return a new INF (w/ the j-bit cleared). # global fdiv_inf_load # global for fsgldiv @@ -9427,7 +9427,7 @@ fneg_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fneg_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -10042,7 +10042,7 @@ fabs_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fabs_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) @@ -11404,7 +11404,7 @@ fadd_zero_2: # # the ZEROes have opposite signs: -# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. +# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. # - -ZERO is returned in the case of RM. # fadd_zero_2_chk_rm: @@ -11856,7 +11856,7 @@ fsub_zero_2: # # the ZEROes have the same signs: -# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP +# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP # - -ZERO is returned in the case of RM. # fsub_zero_2_chk_rm: @@ -12124,7 +12124,7 @@ fsqrt_sd_unfl_dis: # # operand will underflow AND underflow is enabled. -# therefore, we must return the result rounded to extended precision. +# Therefore, we must return the result rounded to extended precision. # fsqrt_sd_unfl_ena: mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h index fb8a06b9ab6a..67e7a78ad96b 100644 --- a/arch/m68k/include/asm/bootinfo.h +++ b/arch/m68k/include/asm/bootinfo.h @@ -145,7 +145,7 @@ struct bi_record { /* * Macintosh hardware profile data - unused, see macintosh.h for - * resonable type values + * reasonable type values */ #define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */ diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index 74fd674b15ad..cbd3d4751dd2 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -165,6 +165,8 @@ unsigned long get_wchan(struct task_struct *p); eip; }) #define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) +#define task_pt_regs(tsk) ((struct pt_regs *) ((tsk)->thread.esp0)) + #define cpu_relax() barrier() #endif diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h index a6ab663bcc2e..ee4011c23281 100644 --- a/arch/m68k/include/asm/ptrace.h +++ b/arch/m68k/include/asm/ptrace.h @@ -86,7 +86,7 @@ struct switch_stack { extern void show_regs(struct pt_regs *); /* - * These are defined as per linux/ptrace.h, which see. + * These are defined as per linux/ptrace.h. */ struct task_struct; diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h index c2bde5e24b0b..a6512bfdd01d 100644 --- a/arch/m68k/include/asm/thread_info_no.h +++ b/arch/m68k/include/asm/thread_info_no.h @@ -12,8 +12,6 @@ #ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - /* * Size of kernel stack for each process. This must be a power of 2... */ @@ -28,6 +26,8 @@ */ #define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER) +#ifndef __ASSEMBLY__ + /* * low level task data. */ diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 7deb402bfc75..218f441de667 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -29,37 +29,16 @@ #include <asm/page.h> #include <asm/unistd.h> -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - return do_mmap2(addr, len, prot, flags, fd, pgoff); + /* + * This is wrong for sun3 - there PAGE_SIZE is 8Kb, + * so we need to shift the argument down by 1; m68k mmap64(3) + * (in libc) expects the last argument of mmap2 in 4Kb units. + */ + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); } /* @@ -90,57 +69,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) goto out; - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); -out: - return error; -} - -#if 0 -struct mmap_arg_struct64 { - __u32 addr; - __u32 len; - __u32 prot; - __u32 flags; - __u64 offset; /* 64 bits */ - __u32 fd; -}; - -asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg) -{ - int error = -EFAULT; - struct file * file = NULL; - struct mmap_arg_struct64 a; - unsigned long pgoff; - - if (copy_from_user(&a, arg, sizeof(a))) - return -EFAULT; - - if ((long)a.offset & ~PAGE_MASK) - return -EINVAL; - - pgoff = a.offset >> PAGE_SHIFT; - if ((a.offset >> PAGE_SHIFT) != pgoff) - return -EINVAL; - - if (!(a.flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(a.fd); - if (!file) - goto out; - } - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); out: return error; } -#endif struct sel_arg_struct { unsigned long n; diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index e2201b90aa22..064f5913db1a 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -533,6 +533,13 @@ config AVNET default y depends on (AVNET5282) +config UBOOT + bool "Support for U-Boot command line parameters" + help + If you say Y here kernel will try to collect command + line parameters from the initial u-boot stack. + default n + config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" default y diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 8f8f4abab2ff..5c9ecd427090 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -352,15 +352,12 @@ asmlinkage int sys_execve(char *name, char **argv, char **envp) char * filename; struct pt_regs *regs = (struct pt_regs *) &name; - lock_kernel(); filename = getname(name); error = PTR_ERR(filename); if (IS_ERR(filename)) - goto out; + return error; error = do_execve(filename, argv, envp, regs); putname(filename); -out: - unlock_kernel(); return error; } diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index 5c2bb3eeaaa2..ba92b90d5fbc 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -29,6 +29,8 @@ #include <linux/bootmem.h> #include <linux/seq_file.h> #include <linux/init.h> +#include <linux/initrd.h> +#include <linux/root_dev.h> #include <asm/setup.h> #include <asm/irq.h> @@ -52,7 +54,6 @@ void (*mach_reset)(void); void (*mach_halt)(void); void (*mach_power_off)(void); - #ifdef CONFIG_M68000 #define CPU "MC68000" #endif @@ -111,6 +112,69 @@ void (*mach_power_off)(void); extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _ramstart, _ramend; +#if defined(CONFIG_UBOOT) +/* + * parse_uboot_commandline + * + * Copies u-boot commandline arguments and store them in the proper linux + * variables. + * + * Assumes: + * _init_sp global contains the address in the stack pointer when the + * kernel starts (see head.S::_start) + * + * U-Boot calling convention: + * (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); + * + * _init_sp can be parsed as such + * + * _init_sp+00 = u-boot cmd after jsr into kernel (skip) + * _init_sp+04 = &kernel board_info (residual data) + * _init_sp+08 = &initrd_start + * _init_sp+12 = &initrd_end + * _init_sp+16 = &cmd_start + * _init_sp+20 = &cmd_end + * + * This also assumes that the memory locations pointed to are still + * unmodified. U-boot places them near the end of external SDRAM. + * + * Argument(s): + * commandp = the linux commandline arg container to fill. + * size = the sizeof commandp. + * + * Returns: + */ +void parse_uboot_commandline(char *commandp, int size) +{ + extern unsigned long _init_sp; + unsigned long *sp; + unsigned long uboot_kbd; + unsigned long uboot_initrd_start, uboot_initrd_end; + unsigned long uboot_cmd_start, uboot_cmd_end; + + + sp = (unsigned long *)_init_sp; + uboot_kbd = sp[1]; + uboot_initrd_start = sp[2]; + uboot_initrd_end = sp[3]; + uboot_cmd_start = sp[4]; + uboot_cmd_end = sp[5]; + + if (uboot_cmd_start && uboot_cmd_end) + strncpy(commandp, (const char *)uboot_cmd_start, size); +#if defined(CONFIG_BLK_DEV_INITRD) + if (uboot_initrd_start && uboot_initrd_end && + (uboot_initrd_end > uboot_initrd_start)) { + initrd_start = uboot_initrd_start; + initrd_end = uboot_initrd_end; + ROOT_DEV = Root_RAM0; + printk(KERN_INFO "initrd at 0x%lx:0x%lx\n", + initrd_start, initrd_end); + } +#endif /* if defined(CONFIG_BLK_DEV_INITRD) */ +} +#endif /* #if defined(CONFIG_UBOOT) */ + void __init setup_arch(char **cmdline_p) { int bootmap_size; @@ -128,7 +192,24 @@ void __init setup_arch(char **cmdline_p) #if defined(CONFIG_BOOTPARAM) strncpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line)); command_line[sizeof(command_line) - 1] = 0; -#endif +#endif /* CONFIG_BOOTPARAM */ + +#if defined(CONFIG_UBOOT) + /* CONFIG_UBOOT and CONFIG_BOOTPARAM defined, concatenate cmdline */ + #if defined(CONFIG_BOOTPARAM) + /* Add the whitespace separator */ + command_line[strlen(CONFIG_BOOTPARAM_STRING)] = ' '; + /* Parse uboot command line into the rest of the buffer */ + parse_uboot_commandline( + &command_line[(strlen(CONFIG_BOOTPARAM_STRING)+1)], + (sizeof(command_line) - + (strlen(CONFIG_BOOTPARAM_STRING)+1))); + /* Only CONFIG_UBOOT defined, create cmdline */ + #else + parse_uboot_commandline(&command_line[0], sizeof(command_line)); + #endif /* CONFIG_BOOTPARAM */ + command_line[sizeof(command_line) - 1] = 0; +#endif /* CONFIG_UBOOT */ printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n"); @@ -204,6 +285,13 @@ void __init setup_arch(char **cmdline_p) free_bootmem(memory_start, memory_end - memory_start); reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT); +#if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD) + if ((initrd_start > 0) && (initrd_start < initrd_end) && + (initrd_end < memory_end)) + reserve_bootmem(initrd_start, initrd_end - initrd_start, + BOOTMEM_DEFAULT); +#endif /* if defined(CONFIG_BLK_DEV_INITRD) */ + /* * Get kmalloc into gear. */ diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c index efdd090778a3..b67cbc735a9b 100644 --- a/arch/m68knommu/kernel/sys_m68k.c +++ b/arch/m68knommu/kernel/sys_m68k.c @@ -27,39 +27,6 @@ #include <asm/cacheflush.h> #include <asm/unistd.h> -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - return do_mmap2(addr, len, prot, flags, fd, pgoff); -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to @@ -88,9 +55,8 @@ asmlinkage int old_mmap(struct mmap_arg_struct *arg) if (a.offset & ~PAGE_MASK) goto out; - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); out: return error; } diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index 23535cc415ae..486837efa3d7 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -210,7 +210,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap_pgoff .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 2736a5e309c0..9f1784f586b9 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -8,6 +8,8 @@ */ #include <asm-generic/vmlinux.lds.h> +#include <asm/page.h> +#include <asm/thread_info.h> #if defined(CONFIG_RAMKERNEL) #define RAM_START CONFIG_KERNELBASE @@ -15,7 +17,7 @@ #define TEXT ram #define DATA ram #define INIT ram -#define BSS ram +#define BSSS ram #endif #if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL) #define RAM_START CONFIG_RAMBASE @@ -27,7 +29,7 @@ #define TEXT rom #define DATA ram #define INIT ram -#define BSS ram +#define BSSS ram #endif #ifndef DATA_ADDR @@ -147,40 +149,19 @@ SECTIONS { . = ALIGN(4); _sdata = . ; DATA_DATA - . = ALIGN(32); - *(.data.cacheline_aligned) - . = ALIGN(8192) ; - *(.data.init_task) + CACHELINE_ALIGNED_DATA(32) + INIT_TASK_DATA(THREAD_SIZE) _edata = . ; } > DATA - .init : { - . = ALIGN(4096); + .init.text : { + . = ALIGN(PAGE_SIZE); __init_begin = .; - _sinittext = .; - INIT_TEXT - _einittext = .; - INIT_DATA - . = ALIGN(16); - __setup_start = .; - *(.init.setup) - __setup_end = .; - __initcall_start = .; - INITCALLS - __initcall_end = .; - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - __security_initcall_start = .; - *(.security_initcall.init) - __security_initcall_end = .; -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(4); - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; -#endif - . = ALIGN(4096); + } > INIT + INIT_TEXT_SECTION(PAGE_SIZE) > INIT + INIT_DATA_SECTION(16) > INIT + .init.data : { + . = ALIGN(PAGE_SIZE); __init_end = .; } > INIT @@ -192,7 +173,7 @@ SECTIONS { . = ALIGN(4) ; _ebss = . ; _end = . ; - } > BSS + } > BSSS DISCARDS } diff --git a/arch/m68knommu/platform/523x/gpio.c b/arch/m68knommu/platform/523x/gpio.c index f02840d54d3c..a8842dc27839 100644 --- a/arch/m68knommu/platform/523x/gpio.c +++ b/arch/m68knommu/platform/523x/gpio.c @@ -30,7 +30,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value, - .ngpio = 8, + .base = 1, + .ngpio = 7, }, .pddr = MCFEPORT_EPDDR, .podr = MCFEPORT_EPDR, @@ -244,7 +245,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, .base = 96, - .ngpio = 4, + .ngpio = 8, }, .pddr = MCFGPIO_PDDR_TIMER, .podr = MCFGPIO_PODR_TIMER, diff --git a/arch/m68knommu/platform/527x/gpio.c b/arch/m68knommu/platform/527x/gpio.c index 1028142851ac..0b56e19db0f8 100644 --- a/arch/m68knommu/platform/527x/gpio.c +++ b/arch/m68knommu/platform/527x/gpio.c @@ -31,7 +31,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value, - .ngpio = 8, + .base = 1, + .ngpio = 7, }, .pddr = MCFEPORT_EPDDR, .podr = MCFEPORT_EPDR, @@ -263,7 +264,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value, - .ngpio = 8, + .base = 1, + .ngpio = 7, }, .pddr = MCFEPORT_EPDDR, .podr = MCFEPORT_EPDR, diff --git a/arch/m68knommu/platform/528x/gpio.c b/arch/m68knommu/platform/528x/gpio.c index ec593950696a..eedaf0adbcd7 100644 --- a/arch/m68knommu/platform/528x/gpio.c +++ b/arch/m68knommu/platform/528x/gpio.c @@ -31,7 +31,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .get = mcf_gpio_get_value, .set = mcf_gpio_set_value, .base = 1, - .ngpio = 8, + .ngpio = 7, }, .pddr = MCFEPORT_EPDDR, .podr = MCFEPORT_EPDR, diff --git a/arch/m68knommu/platform/coldfire/clk.c b/arch/m68knommu/platform/coldfire/clk.c index 7cdbf445b28f..9f1260c5e2ad 100644 --- a/arch/m68knommu/platform/coldfire/clk.c +++ b/arch/m68knommu/platform/coldfire/clk.c @@ -9,6 +9,7 @@ /***************************************************************************/ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/clk.h> #include <asm/coldfire.h> @@ -18,23 +19,27 @@ struct clk *clk_get(struct device *dev, const char *id) { return NULL; } +EXPORT_SYMBOL(clk_get); int clk_enable(struct clk *clk) { return 0; } +EXPORT_SYMBOL(clk_enable); void clk_disable(struct clk *clk) { } +EXPORT_SYMBOL(clk_disable); void clk_put(struct clk *clk) { } +EXPORT_SYMBOL(clk_put); unsigned long clk_get_rate(struct clk *clk) { return MCF_CLK; } - +EXPORT_SYMBOL(clk_get_rate); /***************************************************************************/ diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S index 2b0d73c0cc32..4b91aa24eb00 100644 --- a/arch/m68knommu/platform/coldfire/head.S +++ b/arch/m68knommu/platform/coldfire/head.S @@ -106,6 +106,9 @@ .global _ramvec .global _ramstart .global _ramend +#if defined(CONFIG_UBOOT) +.global _init_sp +#endif /*****************************************************************************/ @@ -124,6 +127,10 @@ _ramstart: .long 0 _ramend: .long 0 +#if defined(CONFIG_UBOOT) +_init_sp: +.long 0 +#endif /*****************************************************************************/ @@ -137,6 +144,9 @@ __HEAD _start: nop /* filler */ movew #0x2700, %sr /* no interrupts */ +#if defined(CONFIG_UBOOT) + movel %sp,_init_sp /* save initial stack pointer */ +#endif /* * Do any platform or board specific setup now. Most boards diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 07cabed4b947..9f3c205fb75b 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -62,46 +62,14 @@ out: return error; } -asmlinkage long -sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - struct file *file = NULL; - int ret = -EBADF; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) { - printk(KERN_INFO "no fd in mmap\r\n"); - goto out; - } - } - - down_write(¤t->mm->mmap_sem); - ret = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); -out: - return ret; -} - asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, off_t pgoff) { - int err = -EINVAL; - - if (pgoff & ~PAGE_MASK) { - printk(KERN_INFO "no pagemask in mmap\r\n"); - goto out; - } + if (pgoff & ~PAGE_MASK) + return -EINVAL; - err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); -out: - return err; + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); } /* diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index c1ab1dc10898..b96f365ea6b1 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -196,7 +196,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* reserved for streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 /* mmap2 */ + .long sys_mmap_pgoff /* mmap2 */ .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index 6a907c58a4bc..cc2108b6b260 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c index d4e9f49a71f7..0929198c5e68 100644 --- a/arch/microblaze/lib/memmove.c +++ b/arch/microblaze/lib/memmove.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 941dc8f94b03..4df851d41a29 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -9,7 +9,7 @@ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * - * Attempts were made, unsuccesfully, to contact the original + * Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. * diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h index 2a52333a062d..7c6681aa2ab8 100644 --- a/arch/mips/include/asm/fcntl.h +++ b/arch/mips/include/asm/fcntl.h @@ -10,7 +10,7 @@ #define O_APPEND 0x0008 -#define O_SYNC 0x0010 +#define O_DSYNC 0x0010 /* used to be O_SYNC, see below */ #define O_NONBLOCK 0x0080 #define O_CREAT 0x0100 /* not fcntl */ #define O_TRUNC 0x0200 /* not fcntl */ @@ -18,6 +18,21 @@ #define O_NOCTTY 0x0800 /* not fcntl */ #define FASYNC 0x1000 /* fcntl, for BSD compatibility */ #define O_LARGEFILE 0x2000 /* allow large file opens */ +/* + * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * the O_SYNC flag. We continue to use the existing numerical value + * for O_DSYNC semantics now, but using the correct symbolic name for it. + * This new value is used to request true Posix O_SYNC semantics. It is + * defined in this strange way to make sure applications compiled against + * new headers get at least O_DSYNC semantics on older kernels. + * + * This has the nice side-effect that we can simply test for O_DSYNC + * wherever we do not care if O_DSYNC or O_SYNC is used. + * + * Note: __O_SYNC must never be used directly. + */ +#define __O_SYNC 0x4000 +#define O_SYNC (__O_SYNC|O_DSYNC) #define O_DIRECT 0x8000 /* direct disk access hint */ #define F_GETLK 14 diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h index 8de0eb9c98a3..ed3a88da70f6 100644 --- a/arch/mips/include/asm/mach-pnx833x/gpio.h +++ b/arch/mips/include/asm/mach-pnx833x/gpio.h @@ -24,7 +24,7 @@ /* BIG FAT WARNING: races danger! No protections exist here. Current users are only early init code, - when locking is not needed because no cuncurency yet exists there, + when locking is not needed because no concurrency yet exists there, and GPIO IRQ dispatcher, which does locking. However, if many uses will ever happen, proper locking will be needed - including locking between different uses diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h index 343ed15f8dc4..57a971904cfe 100644 --- a/arch/mips/include/asm/sgi/ioc.h +++ b/arch/mips/include/asm/sgi/ioc.h @@ -164,7 +164,7 @@ struct sgioc_regs { u32 _unused5; u8 _write[3]; volatile u8 write; -#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */ +#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */ #define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ #define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ #define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h index b6faf08ca81d..591b9061fd8e 100644 --- a/arch/mips/include/asm/sibyte/sb1250_mac.h +++ b/arch/mips/include/asm/sibyte/sb1250_mac.h @@ -212,7 +212,7 @@ #define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1) /* - * MAC Fifo Threshhold registers (Table 9-14) + * MAC Fifo Threshold registers (Table 9-14) * Register: MAC_THRSH_CFG_0 * Register: MAC_THRSH_CFG_1 * Register: MAC_THRSH_CFG_2 diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h index d0c29d4de084..31c76c021bb6 100644 --- a/arch/mips/include/asm/sn/sn0/hubio.h +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -825,7 +825,7 @@ typedef union iprb_u { struct { u64 rsvd1: 15, error: 1, /* Widget rcvd wr resp pkt w/ error */ - ovflow: 5, /* Over flow count. perf measurement */ + ovflow: 5, /* Overflow count. perf measurement */ fire_and_forget: 1, /* Launch Write without response */ mode: 2, /* Widget operation Mode */ rsvd2: 2, diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index df6a430de5eb..c7f1bfef1574 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -84,8 +84,16 @@ static inline int init_mips_clocksource(void) #endif } -extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock); -extern void clockevent_set_clock(struct clock_event_device *cd, - unsigned int clock); +static inline void clocksource_set_clock(struct clocksource *cs, + unsigned int clock) +{ + clocksource_calc_mult_shift(cs, clock, 4); +} + +static inline void clockevent_set_clock(struct clock_event_device *cd, + unsigned int clock) +{ + clockevents_calc_mult_shift(cd, clock, 4); +} #endif /* _ASM_TIME_H */ diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index ad4e017ed2f3..80e2ba694bab 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -82,6 +82,7 @@ static int sp_stopping; #define MTSP_O_SHLOCK 0x0010 #define MTSP_O_EXLOCK 0x0020 #define MTSP_O_ASYNC 0x0040 +/* XXX: check which of these is actually O_SYNC vs O_DSYNC */ #define MTSP_O_FSYNC O_SYNC #define MTSP_O_NOFOLLOW 0x0100 #define MTSP_O_SYNC 0x0080 diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 1a2793efdc4e..f042563c924f 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -67,28 +67,13 @@ SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, pgoff) { - struct file * file = NULL; unsigned long error; error = -EINVAL; if (pgoff & (~PAGE_MASK >> 12)) goto out; - pgoff >>= PAGE_SHIFT-12; - - if (!(flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(fd); - if (!file) - goto out; - } - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); - + error = sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT-12)); out: return error; } diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 24630fd8ef60..a38e3ee95515 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1331,7 +1331,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) if (!((asid += ASID_INC) & ASID_MASK) ) { if (cpu_has_vtag_icache) flush_icache_all(); - /* Traverse all online CPUs (hack requires contigous range) */ + /* Traverse all online CPUs (hack requires contiguous range) */ for_each_online_cpu(i) { /* * We don't need to worry about our own CPU, nor those of diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index fe0d79805603..3f7f466190b4 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -93,7 +93,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, * We do not accept a shared mapping if it would violate * cache aliasing constraints. */ - if ((flags & MAP_SHARED) && (addr & shm_align_mask)) + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) return -EINVAL; return addr; } @@ -129,31 +130,6 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, } } -/* common code for old and new mmaps */ -static inline unsigned long -do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) -{ - unsigned long error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, off_t, offset) @@ -164,7 +140,7 @@ SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, if (offset & ~PAGE_MASK) goto out; - result = do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + result = sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); out: return result; @@ -177,7 +153,7 @@ SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len, if (pgoff & (~PAGE_MASK >> 12)) return -EINVAL; - return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12)); + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12)); } save_static_function(sys_fork); diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 1f467d534642..fb7497405510 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -71,39 +71,6 @@ EXPORT_SYMBOL(perf_irq); unsigned int mips_hpt_frequency; -void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) -{ - u64 temp; - u32 shift; - - /* Find a shift value */ - for (shift = 32; shift > 0; shift--) { - temp = (u64) NSEC_PER_SEC << shift; - do_div(temp, clock); - if ((temp >> 32) == 0) - break; - } - cs->shift = shift; - cs->mult = (u32) temp; -} - -void __cpuinit clockevent_set_clock(struct clock_event_device *cd, - unsigned int clock) -{ - u64 temp; - u32 shift; - - /* Find a shift value */ - for (shift = 32; shift > 0; shift--) { - temp = (u64) clock << shift; - do_div(temp, NSEC_PER_SEC); - if ((temp >> 32) == 0) - break; - } - cd->shift = shift; - cd->mult = (u32) temp; -} - /* * This function exists in order to cause an error due to a duplicate * definition if platform code should have its own implementation. The hook diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index 7c92f79b6480..e94ef158f980 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -26,7 +26,7 @@ void __init prom_init_memory(void) /* override of arch/mips/mm/cache.c: __uncached_access */ int __uncached_access(struct file *file, unsigned long addr) { - if (file->f_flags & O_SYNC) + if (file->f_flags & O_DSYNC) return 1; return addr >= __pa(high_memory) || diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c index b30c5b1f1a2c..a2127d685a0d 100644 --- a/arch/mips/math-emu/dp_sub.c +++ b/arch/mips/math-emu/dp_sub.c @@ -110,7 +110,7 @@ ieee754dp ieee754dp_sub(ieee754dp x, ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* FAAL THOROUGH */ + /* FALL THROUGH */ case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): /* normalize ym,ye */ diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 694d51f523d1..102b2dfa542a 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -194,7 +194,7 @@ void __devinit cpu_cache_init(void) int __weak __uncached_access(struct file *file, unsigned long addr) { - if (file->f_flags & O_SYNC) + if (file->f_flags & O_DSYNC) return 1; return addr >= __pa(high_memory); diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c index a2b2d62d88e3..8ebc3848f3ac 100644 --- a/arch/mips/txx9/generic/smsc_fdc37m81x.c +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -117,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) if (chip_id == SMSC_FDC37M81X_CHIP_ID) smsc_fdc37m81x_config_end(); else { - printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__, + printk(KERN_WARNING "%s: unknown chip id 0x%02x\n", __func__, chip_id); g_smsc_fdc37m81x_base = 0; } diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h index 8eebf89f5ab1..db5c53da73ce 100644 --- a/arch/mn10300/include/asm/mman.h +++ b/arch/mn10300/include/asm/mman.h @@ -1 +1,6 @@ #include <asm-generic/mman.h> + +#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */ + +#define arch_mmap_check(addr, len, flags) \ + (((flags) & MAP_FIXED && (addr) < MIN_MAP_ADDR) ? -EINVAL : 0) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index a94e7ea3faa6..c9ee6c009d79 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -578,7 +578,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* reserved for streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap_pgoff .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 892cce82867e..ec8a21df1142 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -275,16 +275,12 @@ asmlinkage long sys_execve(char __user *name, char *filename; int error; - lock_kernel(); - filename = getname(name); error = PTR_ERR(filename); - if (!IS_ERR(filename)) { - error = do_execve(filename, argv, envp, __frame); - putname(filename); - } - - unlock_kernel(); + if (IS_ERR(filename)) + return error; + error = do_execve(filename, argv, envp, __frame); + putname(filename); return error; } diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c index 8ca5af00334c..17cc6ce04e84 100644 --- a/arch/mn10300/kernel/sys_mn10300.c +++ b/arch/mn10300/kernel/sys_mn10300.c @@ -23,47 +23,13 @@ #include <asm/uaccess.h> -#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */ - -/* - * memory mapping syscall - */ -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - struct file *file = NULL; - long error = -EINVAL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - if (flags & MAP_FIXED && addr < MIN_MAP_ADDR) - goto out; - - error = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage long old_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long offset) { if (offset & ~PAGE_MASK) return -EINVAL; - return sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); } struct sel_arg_struct { diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h index 1e1c824764ee..f357fc693c89 100644 --- a/arch/parisc/include/asm/fcntl.h +++ b/arch/parisc/include/asm/fcntl.h @@ -1,14 +1,13 @@ #ifndef _PARISC_FCNTL_H #define _PARISC_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ #define O_APPEND 000000010 #define O_BLKSEEK 000000100 /* HPUX only */ #define O_CREAT 000000400 /* not fcntl */ #define O_EXCL 000002000 /* not fcntl */ #define O_LARGEFILE 000004000 -#define O_SYNC 000100000 +#define __O_SYNC 000100000 +#define O_SYNC (__O_SYNC|O_DSYNC) #define O_NONBLOCK 000200004 /* HPUX has separate NDELAY & NONBLOCK */ #define O_NOCTTY 000400000 /* not fcntl */ #define O_DSYNC 001000000 /* HPUX only */ diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index 75099efb3bf3..f9f6783e4bdd 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -24,7 +24,7 @@ * * This driver programs the PCX-U/PCX-W performance counters * on the PA-RISC 2.0 chips. The driver keeps all images now - * internally to the kernel to hopefully eliminate the possiblity + * internally to the kernel to hopefully eliminate the possibility * of a bad image halting the CPU. Also, there are different * images for the PCX-W and later chips vs the PCX-U chips. * diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index 71b31957c8f1..9147391afb03 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -110,37 +110,14 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, return addr; } -static unsigned long do_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, unsigned long fd, - unsigned long pgoff) -{ - struct file * file = NULL; - unsigned long error = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file != NULL) - fput(file); -out: - return error; -} - asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { /* Make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE we have. */ - return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT - 12)); + return sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); } asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, @@ -148,7 +125,8 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, unsigned long offset) { if (!(offset & ~PAGE_MASK)) { - return do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + return sys_mmap_pgoff(addr, len, prot, flags, fd, + offset >> PAGE_SHIFT); } else { return -EINVAL; } diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h index 1e180a594589..0de404dfee8b 100644 --- a/arch/powerpc/include/asm/reg_fsl_emb.h +++ b/arch/powerpc/include/asm/reg_fsl_emb.h @@ -39,7 +39,7 @@ #define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ #define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ -#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */ +#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */ #define PMLCB_THRESHMUL_SHIFT 8 #define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 641c74bb8e27..b6bd1eaa1c24 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -52,7 +52,7 @@ static struct hard_trap_info { 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */ { 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */ { 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */ - { 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */ + { 0x2060, 0x0e /* SIGILL */ }, /* performance monitor */ { 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */ { 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */ { 0x3200, 0x02 /* SIGINT */ }, /* watchdog */ diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index c04832c4a02e..3370e62e43d4 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -140,7 +140,6 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long off, int shift) { - struct file * file = NULL; unsigned long ret = -EINVAL; if (!arch_validate_prot(prot)) @@ -151,20 +150,8 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len, goto out; off >>= shift; } - - ret = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - if (!(file = fget(fd))) - goto out; - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - down_write(¤t->mm->mmap_sem); - ret = do_mmap_pgoff(file, addr, len, prot, flags, off); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); + ret = sys_mmap_pgoff(addr, len, prot, flags, fd, off); out: return ret; } diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c index c3a56d65c5a9..a753b72efbc0 100644 --- a/arch/powerpc/kernel/tau_6xx.c +++ b/arch/powerpc/kernel/tau_6xx.c @@ -59,7 +59,7 @@ void set_thresholds(unsigned long cpu) mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID); /* setup THRM2, - * threshold, valid bit, enable interrupts, interrupt when above threshhold + * threshold, valid bit, enable interrupts, interrupt when above threshold */ mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE); #else diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index e9af16cc7c0c..9ba2cc88591d 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -835,7 +835,8 @@ static cycle_t timebase_read(struct clocksource *cs) return (cycle_t)get_tb(); } -void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) +void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, + u32 mult) { u64 t2x, stamp_xsec; @@ -848,7 +849,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) /* XXX this assumes clock->shift == 22 */ /* 4611686018 ~= 2^(20+64-22) / 1e9 */ - t2x = (u64) clock->mult * 4611686018ULL; + t2x = (u64) mult * 4611686018ULL; stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC; do_div(stamp_xsec, 1000000000); stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC; @@ -925,7 +926,7 @@ static void register_decrementer_clockevent(int cpu) *dec = decrementer_clockevent; dec->cpumask = cpumask_of(cpu); - printk(KERN_DEBUG "clockevent: %s mult[%lx] shift[%d] cpu[%d]\n", + printk(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n", dec->name, dec->mult, dec->shift, cpu); clockevents_register_device(dec); diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 137dc22afa42..d84d19224a95 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -721,7 +721,7 @@ static int __init vdso_init(void) #ifdef CONFIG_PPC64 /* - * Fill up the "systemcfg" stuff for backward compatiblity + * Fill up the "systemcfg" stuff for backward compatibility */ strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64"); vdso_data->version.major = SYSTEMCFG_MAJOR; diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index ae06c6236d9c..2c9e52267292 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -248,7 +248,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count) * There is no debug setup required for the cycles event. * Note that only events in the same group can be used. * Otherwise, there will be conflicts in correctly routing - * the signals on the debug bus. It is the responsiblity + * the signals on the debug bus. It is the responsibility * of the OProfile user tool to check the events are in * the same group. */ @@ -1594,7 +1594,7 @@ static void cell_handle_interrupt_spu(struct pt_regs *regs, * to a latch. The new values (interrupt setting bits, reset * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get - * this to work as desired, the permormance monitor needs to + * this to work as desired, the performance monitor needs to * be disabled while writing to the latches. This is a * HW design issue. */ @@ -1668,7 +1668,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs, * to a latch. The new values (interrupt setting bits, reset * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get - * this to work as desired, the permormance monitor needs to + * this to work as desired, the performance monitor needs to * be disabled while writing to the latches. This is a * HW design issue. */ diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index dd43114e9684..da110bd88346 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -100,7 +100,7 @@ const struct of_device_id mpc52xx_pci_ids[] __initdata = { }; /* ======================================================================== */ -/* PCI configuration acess */ +/* PCI configuration access */ /* ======================================================================== */ static int diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index e81403b245b5..ab2027cdf893 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -302,7 +302,7 @@ static void __init setup_chaos(struct pci_controller *hose, * 1 -> Skip the device but act as if the access was successfull * (return 0xff's on reads, eventually, cache config space * accesses in a later version) - * -1 -> Hide the device (unsuccessful acess) + * -1 -> Hide the device (unsuccessful access) */ static int u3_ht_skip_device(struct pci_controller *hose, struct pci_bus *bus, unsigned int devfn) diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index ae3c4db86fe8..bafc3f85360d 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -160,7 +160,7 @@ static int dart_build(struct iommu_table *tbl, long index, dp = ((unsigned int*)tbl->it_base) + index; - /* On U3, all memory is contigous, so we can move this + /* On U3, all memory is contiguous, so we can move this * out of the loop. */ l = npages; diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 16c673096a22..c80235206c01 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -220,23 +220,8 @@ config AUDIT_ARCH bool default y -config S390_SWITCH_AMODE - bool "Switch kernel/user addressing modes" - help - This option allows to switch the addressing modes of kernel and user - space. The kernel parameter switch_amode=on will enable this feature, - default is disabled. Enabling this (via kernel parameter) on machines - earlier than IBM System z9-109 EC/BC will reduce system performance. - - Note that this option will also be selected by selecting the execute - protection option below. Enabling the execute protection via the - noexec kernel parameter will also switch the addressing modes, - independent of the switch_amode kernel parameter. - - config S390_EXEC_PROTECT bool "Data execute protection" - select S390_SWITCH_AMODE help This option allows to enable a buffer overflow protection for user space programs and it also selects the addressing mode option above. diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index b49c00ce65e9..a3209906739e 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -6,7 +6,6 @@ #include <linux/fs.h> #include <linux/init.h> #include <linux/kernel.h> -#include <linux/smp_lock.h> #include <linux/miscdevice.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -49,7 +48,6 @@ static unsigned char parm_block[32] = { static int prng_open(struct inode *inode, struct file *file) { - cycle_kernel_lock(); return nonseekable_open(inode, file); } diff --git a/arch/s390/defconfig b/arch/s390/defconfig index ab4464486b7a..f4e53c6708dc 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -185,7 +185,6 @@ CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_AUDIT_ARCH=y -CONFIG_S390_SWITCH_AMODE=y CONFIG_S390_EXEC_PROTECT=y # diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index ae7c8f9f94a5..2a113d6a7dfd 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -21,7 +21,7 @@ #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) #define __CS_LOOP(ptr, op_val, op_string) ({ \ - typeof(ptr->counter) old_val, new_val; \ + int old_val, new_val; \ asm volatile( \ " l %0,%2\n" \ "0: lr %1,%0\n" \ @@ -38,7 +38,7 @@ #else /* __GNUC__ */ #define __CS_LOOP(ptr, op_val, op_string) ({ \ - typeof(ptr->counter) old_val, new_val; \ + int old_val, new_val; \ asm volatile( \ " l %0,0(%3)\n" \ "0: lr %1,%0\n" \ @@ -143,7 +143,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) #define __CSG_LOOP(ptr, op_val, op_string) ({ \ - typeof(ptr->counter) old_val, new_val; \ + long long old_val, new_val; \ asm volatile( \ " lg %0,%2\n" \ "0: lgr %1,%0\n" \ @@ -160,7 +160,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #else /* __GNUC__ */ #define __CSG_LOOP(ptr, op_val, op_string) ({ \ - typeof(ptr->counter) old_val, new_val; \ + long long old_val, new_val; \ asm volatile( \ " lg %0,0(%3)\n" \ "0: lgr %1,%0\n" \ diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h index 2a5419551176..f4bd346a52d3 100644 --- a/arch/s390/include/asm/ccwdev.h +++ b/arch/s390/include/asm/ccwdev.h @@ -142,6 +142,8 @@ struct ccw1; extern int ccw_device_set_options_mask(struct ccw_device *, unsigned long); extern int ccw_device_set_options(struct ccw_device *, unsigned long); extern void ccw_device_clear_options(struct ccw_device *, unsigned long); +int ccw_device_is_pathgroup(struct ccw_device *cdev); +int ccw_device_is_multipath(struct ccw_device *cdev); /* Allow for i/o completion notification after primary interrupt status. */ #define CCWDEV_EARLY_NOTIFICATION 0x0001 @@ -151,6 +153,8 @@ extern void ccw_device_clear_options(struct ccw_device *, unsigned long); #define CCWDEV_DO_PATHGROUP 0x0004 /* Allow forced onlining of boxed devices. */ #define CCWDEV_ALLOW_FORCE 0x0008 +/* Try to use multipath mode. */ +#define CCWDEV_DO_MULTIPATH 0x0010 extern int ccw_device_start(struct ccw_device *, struct ccw1 *, unsigned long, __u8, unsigned long); diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index f23961ada7fb..258ba88b7b50 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -183,6 +183,7 @@ struct s390_idle_data { unsigned long long idle_count; unsigned long long idle_enter; unsigned long long idle_time; + int nohz_delay; }; DECLARE_PER_CPU(struct s390_idle_data, s390_idle); @@ -198,4 +199,11 @@ static inline void s390_idle_check(void) vtime_start_cpu(); } +static inline int s390_nohz_delay(int cpu) +{ + return per_cpu(s390_idle, cpu).nohz_delay != 0; +} + +#define arch_needs_cpu(cpu) s390_nohz_delay(cpu) + #endif /* _S390_CPUTIME_H */ diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index fc7edd6f41b6..976e273988c2 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -36,7 +36,7 @@ static inline int init_new_context(struct task_struct *tsk, mm->context.has_pgste = 1; mm->context.alloc_pgste = 1; } else { - mm->context.noexec = s390_noexec; + mm->context.noexec = (user_mode == SECONDARY_SPACE_MODE); mm->context.has_pgste = 0; mm->context.alloc_pgste = 0; } @@ -58,7 +58,7 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk) pgd_t *pgd = mm->pgd; S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd); - if (switch_amode) { + if (user_mode != HOME_SPACE_MODE) { /* Load primary space page table origin. */ pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd; S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd); diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index ddad5903341c..68940d0bad91 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -143,7 +143,8 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm) spin_lock_init(&mm->context.list_lock); INIT_LIST_HEAD(&mm->context.crst_list); INIT_LIST_HEAD(&mm->context.pgtable_list); - return (pgd_t *) crst_table_alloc(mm, s390_noexec); + return (pgd_t *) + crst_table_alloc(mm, user_mode == SECONDARY_SPACE_MODE); } #define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 60a7b1a1702f..e2fa79cf0614 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -169,12 +169,13 @@ extern unsigned long VMALLOC_START; * STL Segment-Table-Length: Segment-table length (STL+1*16 entries -> up to 2048) * * A 64 bit pagetable entry of S390 has following format: - * | PFRA |0IP0| OS | + * | PFRA |0IPC| OS | * 0000000000111111111122222222223333333333444444444455555555556666 * 0123456789012345678901234567890123456789012345678901234567890123 * * I Page-Invalid Bit: Page is not available for address-translation * P Page-Protection Bit: Store access not possible for page + * C Change-bit override: HW is not required to set change bit * * A 64 bit segmenttable entry of S390 has following format: * | P-table origin | TT @@ -218,6 +219,7 @@ extern unsigned long VMALLOC_START; */ /* Hardware bits in the page table entry */ +#define _PAGE_CO 0x100 /* HW Change-bit override */ #define _PAGE_RO 0x200 /* HW read-only bit */ #define _PAGE_INVALID 0x400 /* HW invalid bit */ diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index e37478e87286..52a779c337e8 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -49,17 +49,12 @@ extern unsigned long memory_end; void detect_memory_layout(struct mem_chunk chunk[]); -#ifdef CONFIG_S390_SWITCH_AMODE -extern unsigned int switch_amode; -#else -#define switch_amode (0) -#endif - -#ifdef CONFIG_S390_EXEC_PROTECT -extern unsigned int s390_noexec; -#else -#define s390_noexec (0) -#endif +#define PRIMARY_SPACE_MODE 0 +#define ACCESS_REGISTER_MODE 1 +#define SECONDARY_SPACE_MODE 2 +#define HOME_SPACE_MODE 3 + +extern unsigned int user_mode; /* * Machine features detected in head.S diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index a868b272c257..2ab1141eeb50 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -1,57 +1,22 @@ /* - * include/asm-s390/smp.h - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * Heiko Carstens (heiko.carstens@de.ibm.com) + * Copyright IBM Corp. 1999,2009 + * Author(s): Denis Joseph Barrow, + * Martin Schwidefsky <schwidefsky@de.ibm.com>, + * Heiko Carstens <heiko.carstens@de.ibm.com>, */ #ifndef __ASM_SMP_H #define __ASM_SMP_H -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <linux/bitops.h> +#ifdef CONFIG_SMP -#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__) - -#include <asm/lowcore.h> -#include <asm/sigp.h> -#include <asm/ptrace.h> #include <asm/system.h> - -/* - s390 specific smp.c headers - */ -typedef struct -{ - int intresting; - sigp_ccode ccode; - __u32 status; - __u16 cpu; -} sigp_info; +#include <asm/sigp.h> extern void machine_restart_smp(char *); extern void machine_halt_smp(void); extern void machine_power_off_smp(void); -#define NO_PROC_ID 0xFF /* No processor magic marker */ - -/* - * This magic constant controls our willingness to transfer - * a process across CPUs. Such a transfer incurs misses on the L1 - * cache, and on a P6 or P5 with multiple L2 caches L2 hits. My - * gut feeling is this will vary by board in value. For a board - * with separate L2 cache it probably depends also on the RSS, and - * for a board with shared L2 cache it ought to decay fast as other - * processes are run. - */ - -#define PROC_CHANGE_PENALTY 20 /* Schedule penalty */ - #define raw_smp_processor_id() (S390_lowcore.cpu_nr) -#define cpu_logical_map(cpu) (cpu) extern int __cpu_disable (void); extern void __cpu_die (unsigned int cpu); @@ -64,7 +29,9 @@ extern int smp_cpu_polarization[]; extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); -#endif +extern union save_area *zfcpdump_save_areas[NR_CPUS + 1]; + +#endif /* CONFIG_SMP */ #ifdef CONFIG_HOTPLUG_CPU extern int smp_rescan_cpus(void); @@ -72,5 +39,4 @@ extern int smp_rescan_cpus(void); static inline int smp_rescan_cpus(void) { return 0; } #endif -extern union save_area *zfcpdump_save_areas[NR_CPUS + 1]; -#endif +#endif /* __ASM_SMP_H */ diff --git a/arch/s390/include/asm/sockios.h b/arch/s390/include/asm/sockios.h index f4fc16c7da59..6f60eee73242 100644 --- a/arch/s390/include/asm/sockios.h +++ b/arch/s390/include/asm/sockios.h @@ -1,21 +1,6 @@ -/* - * include/asm-s390/sockios.h - * - * S390 version - * - * Derived from "include/asm-i386/sockios.h" - */ +#ifndef _ASM_S390_SOCKIOS_H +#define _ASM_S390_SOCKIOS_H -#ifndef __ARCH_S390_SOCKIOS__ -#define __ARCH_S390_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ +#include <asm-generic/sockios.h> #endif diff --git a/arch/s390/include/asm/termbits.h b/arch/s390/include/asm/termbits.h index 58731853d529..71bf6ac6a2b9 100644 --- a/arch/s390/include/asm/termbits.h +++ b/arch/s390/include/asm/termbits.h @@ -1,206 +1,6 @@ -/* - * include/asm-s390/termbits.h - * - * S390 version - * - * Derived from "include/asm-i386/termbits.h" - */ +#ifndef _ASM_S390_TERMBITS_H +#define _ASM_S390_TERMBITS_H -#ifndef __ARCH_S390_TERMBITS_H__ -#define __ARCH_S390_TERMBITS_H__ - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 +#include <asm-generic/termbits.h> #endif diff --git a/arch/s390/include/asm/todclk.h b/arch/s390/include/asm/todclk.h deleted file mode 100644 index c7f62055488a..000000000000 --- a/arch/s390/include/asm/todclk.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * File...........: linux/include/asm/todclk.h - * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com> - * Bugreports.to..: <Linux390@de.ibm.com> - * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000 - * - * History of changes (starts July 2000) - */ - -#ifndef __ASM_TODCLK_H -#define __ASM_TODCLK_H - -#ifdef __KERNEL__ - -#define TOD_uSEC (0x1000ULL) -#define TOD_mSEC (1000 * TOD_uSEC) -#define TOD_SEC (1000 * TOD_mSEC) -#define TOD_MIN (60 * TOD_SEC) -#define TOD_HOUR (60 * TOD_MIN) - -#endif - -#endif diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h index 8377e91533d2..cbf0a8745bf4 100644 --- a/arch/s390/include/asm/uaccess.h +++ b/arch/s390/include/asm/uaccess.h @@ -93,6 +93,8 @@ extern struct uaccess_ops uaccess_mvcos; extern struct uaccess_ops uaccess_mvcos_switch; extern struct uaccess_ops uaccess_pt; +extern int __handle_fault(unsigned long, unsigned long, int); + static inline int __put_user_fn(size_t size, void __user *ptr, void *x) { size = uaccess.copy_to_user_small(size, ptr, x); diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index c7be8e10b87e..683f6381cc59 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_FUNCTION_TRACER) += $(if $(CONFIG_64BIT),mcount64.o,mcount.o) obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o # Kexec part S390_KEXEC_OBJS := machine_kexec.o crash.o diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index fda1a8123f9b..22c9e557bb22 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -31,14 +31,8 @@ #include <linux/shm.h> #include <linux/slab.h> #include <linux/uio.h> -#include <linux/nfs_fs.h> #include <linux/quota.h> #include <linux/module.h> -#include <linux/sunrpc/svc.h> -#include <linux/nfsd/nfsd.h> -#include <linux/nfsd/cache.h> -#include <linux/nfsd/xdr.h> -#include <linux/nfsd/syscall.h> #include <linux/poll.h> #include <linux/personality.h> #include <linux/stat.h> @@ -630,38 +624,6 @@ struct mmap_arg_struct_emu31 { u32 offset; }; -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - struct file * file = NULL; - unsigned long error = -EBADF; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - if (!IS_ERR((void *) error) && error + len >= 0x80000000ULL) { - /* Result is out of bounds. */ - do_munmap(current->mm, addr, len); - error = -ENOMEM; - } - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - - asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg) { @@ -675,7 +637,8 @@ old32_mmap(struct mmap_arg_struct_emu31 __user *arg) if (a.offset & ~PAGE_MASK) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); out: return error; } @@ -688,7 +651,7 @@ sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg) if (copy_from_user(&a, arg, sizeof(a))) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); out: return error; } diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h index 45e9092b3aad..cb97afc85c94 100644 --- a/arch/s390/kernel/compat_linux.h +++ b/arch/s390/kernel/compat_linux.h @@ -4,10 +4,6 @@ #include <linux/compat.h> #include <linux/socket.h> #include <linux/syscalls.h> -#include <linux/nfs_fs.h> -#include <linux/sunrpc/svc.h> -#include <linux/nfsd/nfsd.h> -#include <linux/nfsd/export.h> /* Macro that masks the high order bit of an 32 bit pointer and converts it*/ /* to a 64 bit pointer */ diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 6a250808092b..d984a2a380c3 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -83,6 +83,8 @@ startup_continue: slr %r0,%r0 # set cpuid to zero sigp %r1,%r0,0x12 # switch to esame mode sam64 # switch to 64 bit mode + llgfr %r13,%r13 # clear high-order half of base reg + lmh %r0,%r15,.Lzero64-.LPG1(%r13) # clear high-order half lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area # move IPL device to lowcore @@ -127,6 +129,7 @@ startup_continue: .L4malign:.quad 0xffffffffffc00000 .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 .Lnop: .long 0x07000700 +.Lzero64:.fill 16,4,0x0 #ifdef CONFIG_ZFCPDUMP .Lcurrent_cpu: .long 0x0 diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c index 0de305b598ce..59618bcd99b7 100644 --- a/arch/s390/kernel/s390_ext.c +++ b/arch/s390/kernel/s390_ext.c @@ -126,6 +126,8 @@ void __irq_entry do_extint(struct pt_regs *regs, unsigned short code) /* Serve timer interrupts first. */ clock_comparator_work(); kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; + if (code != 0x1004) + __get_cpu_var(s390_idle).nohz_delay = 1; index = ext_hash(code); for (p = ext_int_hash[index]; p; p = p->next) { if (likely(p->code == code)) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 061479ff029f..0663287fa1b3 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -305,9 +305,8 @@ static int __init early_parse_mem(char *p) } early_param("mem", early_parse_mem); -#ifdef CONFIG_S390_SWITCH_AMODE -unsigned int switch_amode = 0; -EXPORT_SYMBOL_GPL(switch_amode); +unsigned int user_mode = HOME_SPACE_MODE; +EXPORT_SYMBOL_GPL(user_mode); static int set_amode_and_uaccess(unsigned long user_amode, unsigned long user32_amode) @@ -340,23 +339,29 @@ static int set_amode_and_uaccess(unsigned long user_amode, */ static int __init early_parse_switch_amode(char *p) { - switch_amode = 1; + if (user_mode != SECONDARY_SPACE_MODE) + user_mode = PRIMARY_SPACE_MODE; return 0; } early_param("switch_amode", early_parse_switch_amode); -#else /* CONFIG_S390_SWITCH_AMODE */ -static inline int set_amode_and_uaccess(unsigned long user_amode, - unsigned long user32_amode) +static int __init early_parse_user_mode(char *p) { + if (p && strcmp(p, "primary") == 0) + user_mode = PRIMARY_SPACE_MODE; +#ifdef CONFIG_S390_EXEC_PROTECT + else if (p && strcmp(p, "secondary") == 0) + user_mode = SECONDARY_SPACE_MODE; +#endif + else if (!p || strcmp(p, "home") == 0) + user_mode = HOME_SPACE_MODE; + else + return 1; return 0; } -#endif /* CONFIG_S390_SWITCH_AMODE */ +early_param("user_mode", early_parse_user_mode); #ifdef CONFIG_S390_EXEC_PROTECT -unsigned int s390_noexec = 0; -EXPORT_SYMBOL_GPL(s390_noexec); - /* * Enable execute protection? */ @@ -364,8 +369,7 @@ static int __init early_parse_noexec(char *p) { if (!strncmp(p, "off", 3)) return 0; - switch_amode = 1; - s390_noexec = 1; + user_mode = SECONDARY_SPACE_MODE; return 0; } early_param("noexec", early_parse_noexec); @@ -373,7 +377,7 @@ early_param("noexec", early_parse_noexec); static void setup_addressing_mode(void) { - if (s390_noexec) { + if (user_mode == SECONDARY_SPACE_MODE) { if (set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY)) pr_info("Execute protection active, " @@ -381,7 +385,7 @@ static void setup_addressing_mode(void) else pr_info("Execute protection active, " "mvcos not available\n"); - } else if (switch_amode) { + } else if (user_mode == PRIMARY_SPACE_MODE) { if (set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY)) pr_info("Address spaces switched, " "mvcos available\n"); @@ -411,7 +415,7 @@ setup_lowcore(void) lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) restart_int_handler; - if (switch_amode) + if (user_mode != HOME_SPACE_MODE) lc->restart_psw.mask |= PSW_ASC_HOME; lc->external_new_psw.mask = psw_kernel_bits; lc->external_new_psw.addr = diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index e9d94f61d500..86a74c9c9e63 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -32,32 +32,6 @@ #include <asm/uaccess.h> #include "entry.h" -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - long error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux for S/390 isn't able to handle more than 5 @@ -81,7 +55,7 @@ SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg) if (copy_from_user(&a, arg, sizeof(a))) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); out: return error; } @@ -98,7 +72,7 @@ SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg) if (a.offset & ~PAGE_MASK) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); out: return error; } diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 34162a0b2caa..65065ac48ed3 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -214,7 +214,8 @@ struct clocksource * __init clocksource_default_clock(void) return &clocksource_tod; } -void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) +void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, + u32 mult) { if (clock != &clocksource_tod) return; @@ -334,7 +335,7 @@ int get_sync_clock(unsigned long long *clock) sw0 = atomic_read(sw_ptr); *clock = get_clock(); sw1 = atomic_read(sw_ptr); - put_cpu_var(clock_sync_sync); + put_cpu_var(clock_sync_word); if (sw0 == sw1 && (sw0 & 0x80000000U)) /* Success: time is in sync. */ return 0; @@ -384,7 +385,7 @@ static inline int check_sync_clock(void) sw_ptr = &get_cpu_var(clock_sync_word); rc = (atomic_read(sw_ptr) & 0x80000000U) != 0; - put_cpu_var(clock_sync_sync); + put_cpu_var(clock_sync_word); return rc; } diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c index adfb32aa6d59..5f99e66c51c3 100644 --- a/arch/s390/kernel/vdso.c +++ b/arch/s390/kernel/vdso.c @@ -86,7 +86,8 @@ static void vdso_init_data(struct vdso_data *vd) unsigned int facility_list; facility_list = stfl(); - vd->ectg_available = switch_amode && (facility_list & 1); + vd->ectg_available = + user_mode != HOME_SPACE_MODE && (facility_list & 1); } #ifdef CONFIG_64BIT @@ -114,7 +115,7 @@ int vdso_alloc_per_cpu(int cpu, struct _lowcore *lowcore) lowcore->vdso_per_cpu_data = __LC_PASTE; - if (!switch_amode || !vdso_enabled) + if (user_mode == HOME_SPACE_MODE || !vdso_enabled) return 0; segment_table = __get_free_pages(GFP_KERNEL, SEGMENT_ORDER); @@ -160,7 +161,7 @@ void vdso_free_per_cpu(int cpu, struct _lowcore *lowcore) unsigned long segment_table, page_table, page_frame; u32 *psal, *aste; - if (!switch_amode || !vdso_enabled) + if (user_mode == HOME_SPACE_MODE || !vdso_enabled) return; psal = (u32 *)(addr_t) lowcore->paste[4]; @@ -184,7 +185,7 @@ static void __vdso_init_cr5(void *dummy) static void vdso_init_cr5(void) { - if (switch_amode && vdso_enabled) + if (user_mode != HOME_SPACE_MODE && vdso_enabled) on_each_cpu(__vdso_init_cr5, NULL, 1); } #endif /* CONFIG_64BIT */ diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index c41bb0d416e1..b59a812a010e 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -167,6 +167,8 @@ void vtime_stop_cpu(void) /* Wait for external, I/O or machine check interrupt. */ psw.mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_IO | PSW_MASK_EXT; + idle->nohz_delay = 0; + /* Check if the CPU timer needs to be reprogrammed. */ if (vq->do_spt) { __u64 vmax = VTIMER_MAX_SLICE; diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig index bf164fc21864..6ee55ae84ce2 100644 --- a/arch/s390/kvm/Kconfig +++ b/arch/s390/kvm/Kconfig @@ -20,7 +20,6 @@ config KVM depends on HAVE_KVM && EXPERIMENTAL select PREEMPT_NOTIFIERS select ANON_INODES - select S390_SWITCH_AMODE ---help--- Support hosting paravirtualized guest machines using the SIE virtualization capability on the mainframe. This should work diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c index 58da3f461214..60455f104ea3 100644 --- a/arch/s390/lib/uaccess_mvcos.c +++ b/arch/s390/lib/uaccess_mvcos.c @@ -162,7 +162,6 @@ static size_t clear_user_mvcos(size_t size, void __user *to) return size; } -#ifdef CONFIG_S390_SWITCH_AMODE static size_t strnlen_user_mvcos(size_t count, const char __user *src) { char buf[256]; @@ -200,7 +199,6 @@ static size_t strncpy_from_user_mvcos(size_t count, const char __user *src, } while ((len_str == len) && (done < count)); return done; } -#endif /* CONFIG_S390_SWITCH_AMODE */ struct uaccess_ops uaccess_mvcos = { .copy_from_user = copy_from_user_mvcos_check, @@ -215,7 +213,6 @@ struct uaccess_ops uaccess_mvcos = { .futex_atomic_cmpxchg = futex_atomic_cmpxchg_std, }; -#ifdef CONFIG_S390_SWITCH_AMODE struct uaccess_ops uaccess_mvcos_switch = { .copy_from_user = copy_from_user_mvcos, .copy_from_user_small = copy_from_user_mvcos, @@ -228,4 +225,3 @@ struct uaccess_ops uaccess_mvcos_switch = { .futex_atomic_op = futex_atomic_op_pt, .futex_atomic_cmpxchg = futex_atomic_cmpxchg_pt, }; -#endif diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index cb5d59eab0ee..404f2de296dc 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -23,86 +23,21 @@ static inline pte_t *follow_table(struct mm_struct *mm, unsigned long addr) pgd = pgd_offset(mm, addr); if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) - return NULL; + return (pte_t *) 0x3a; pud = pud_offset(pgd, addr); if (pud_none(*pud) || unlikely(pud_bad(*pud))) - return NULL; + return (pte_t *) 0x3b; pmd = pmd_offset(pud, addr); if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) - return NULL; + return (pte_t *) 0x10; return pte_offset_map(pmd, addr); } -static int __handle_fault(struct mm_struct *mm, unsigned long address, - int write_access) -{ - struct vm_area_struct *vma; - int ret = -EFAULT; - int fault; - - if (in_atomic()) - return ret; - down_read(&mm->mmap_sem); - vma = find_vma(mm, address); - if (unlikely(!vma)) - goto out; - if (unlikely(vma->vm_start > address)) { - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto out; - if (expand_stack(vma, address)) - goto out; - } - - if (!write_access) { - /* page not present, check vm flags */ - if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) - goto out; - } else { - if (!(vma->vm_flags & VM_WRITE)) - goto out; - } - -survive: - fault = handle_mm_fault(mm, vma, address, write_access ? FAULT_FLAG_WRITE : 0); - if (unlikely(fault & VM_FAULT_ERROR)) { - if (fault & VM_FAULT_OOM) - goto out_of_memory; - else if (fault & VM_FAULT_SIGBUS) - goto out_sigbus; - BUG(); - } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; - ret = 0; -out: - up_read(&mm->mmap_sem); - return ret; - -out_of_memory: - up_read(&mm->mmap_sem); - if (is_global_init(current)) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } - printk("VM: killing process %s\n", current->comm); - return ret; - -out_sigbus: - up_read(&mm->mmap_sem); - current->thread.prot_addr = address; - current->thread.trap_no = 0x11; - force_sig(SIGBUS, current); - return ret; -} - -static size_t __user_copy_pt(unsigned long uaddr, void *kptr, - size_t n, int write_user) +static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, + size_t n, int write_user) { struct mm_struct *mm = current->mm; unsigned long offset, pfn, done, size; @@ -114,12 +49,17 @@ retry: spin_lock(&mm->page_table_lock); do { pte = follow_table(mm, uaddr); - if (!pte || !pte_present(*pte) || - (write_user && !pte_write(*pte))) + if ((unsigned long) pte < 0x1000) goto fault; + if (!pte_present(*pte)) { + pte = (pte_t *) 0x11; + goto fault; + } else if (write_user && !pte_write(*pte)) { + pte = (pte_t *) 0x04; + goto fault; + } pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE - 1); size = min(n - done, PAGE_SIZE - offset); if (write_user) { @@ -137,7 +77,7 @@ retry: return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(mm, uaddr, write_user)) + if (__handle_fault(uaddr, (unsigned long) pte, write_user)) return n - done; goto retry; } @@ -146,30 +86,31 @@ fault: * Do DAT for user address by page table walk, return kernel address. * This function needs to be called with current->mm->page_table_lock held. */ -static unsigned long __dat_user_addr(unsigned long uaddr) +static __always_inline unsigned long __dat_user_addr(unsigned long uaddr) { struct mm_struct *mm = current->mm; - unsigned long pfn, ret; + unsigned long pfn; pte_t *pte; int rc; - ret = 0; retry: pte = follow_table(mm, uaddr); - if (!pte || !pte_present(*pte)) + if ((unsigned long) pte < 0x1000) goto fault; + if (!pte_present(*pte)) { + pte = (pte_t *) 0x11; + goto fault; + } pfn = pte_pfn(*pte); - ret = (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1)); -out: - return ret; + return (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1)); fault: spin_unlock(&mm->page_table_lock); - rc = __handle_fault(mm, uaddr, 0); + rc = __handle_fault(uaddr, (unsigned long) pte, 0); spin_lock(&mm->page_table_lock); - if (rc) - goto out; - goto retry; + if (!rc) + goto retry; + return 0; } size_t copy_from_user_pt(size_t n, const void __user *from, void *to) @@ -234,8 +175,12 @@ retry: spin_lock(&mm->page_table_lock); do { pte = follow_table(mm, uaddr); - if (!pte || !pte_present(*pte)) + if ((unsigned long) pte < 0x1000) + goto fault; + if (!pte_present(*pte)) { + pte = (pte_t *) 0x11; goto fault; + } pfn = pte_pfn(*pte); offset = uaddr & (PAGE_SIZE-1); @@ -249,9 +194,8 @@ retry: return done + 1; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(mm, uaddr, 0)) { + if (__handle_fault(uaddr, (unsigned long) pte, 0)) return 0; - } goto retry; } @@ -284,7 +228,7 @@ static size_t copy_in_user_pt(size_t n, void __user *to, { struct mm_struct *mm = current->mm; unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to, - uaddr, done, size; + uaddr, done, size, error_code; unsigned long uaddr_from = (unsigned long) from; unsigned long uaddr_to = (unsigned long) to; pte_t *pte_from, *pte_to; @@ -298,17 +242,28 @@ static size_t copy_in_user_pt(size_t n, void __user *to, retry: spin_lock(&mm->page_table_lock); do { + write_user = 0; + uaddr = uaddr_from; pte_from = follow_table(mm, uaddr_from); - if (!pte_from || !pte_present(*pte_from)) { - uaddr = uaddr_from; - write_user = 0; + error_code = (unsigned long) pte_from; + if (error_code < 0x1000) + goto fault; + if (!pte_present(*pte_from)) { + error_code = 0x11; goto fault; } + write_user = 1; + uaddr = uaddr_to; pte_to = follow_table(mm, uaddr_to); - if (!pte_to || !pte_present(*pte_to) || !pte_write(*pte_to)) { - uaddr = uaddr_to; - write_user = 1; + error_code = (unsigned long) pte_to; + if (error_code < 0x1000) + goto fault; + if (!pte_present(*pte_to)) { + error_code = 0x11; + goto fault; + } else if (!pte_write(*pte_to)) { + error_code = 0x04; goto fault; } @@ -329,7 +284,7 @@ retry: return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(mm, uaddr, write_user)) + if (__handle_fault(uaddr, error_code, write_user)) return n - done; goto retry; } diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c index 3ee78ccb617d..cd4e9c168dd7 100644 --- a/arch/s390/math-emu/math.c +++ b/arch/s390/math-emu/math.c @@ -2088,7 +2088,7 @@ int math_emu_ldr(__u8 *opcode) { __u16 opc = *((__u16 *) opcode); if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ - /* we got an exception therfore ry can't be in {0,2,4,6} */ + /* we got an exception therefore ry can't be in {0,2,4,6} */ asm volatile( /* load rx from fp_regs.fprs[ry] */ " bras 1,0f\n" " ld 0,0(%1)\n" @@ -2118,7 +2118,7 @@ int math_emu_ler(__u8 *opcode) { __u16 opc = *((__u16 *) opcode); if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */ - /* we got an exception therfore ry can't be in {0,2,4,6} */ + /* we got an exception therefore ry can't be in {0,2,4,6} */ asm volatile( /* load rx from fp_regs.fprs[ry] */ " bras 1,0f\n" " le 0,0(%1)\n" diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index ff58779bf7e9..76a3637b88e0 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -18,6 +18,7 @@ #include <linux/swap.h> #include <linux/kthread.h> #include <linux/oom.h> +#include <linux/suspend.h> #include <asm/pgalloc.h> #include <asm/uaccess.h> @@ -44,6 +45,7 @@ static volatile long cmm_pages_target; static volatile long cmm_timed_pages_target; static long cmm_timeout_pages; static long cmm_timeout_seconds; +static int cmm_suspended; static struct cmm_page_array *cmm_page_list; static struct cmm_page_array *cmm_timed_page_list; @@ -147,9 +149,9 @@ cmm_thread(void *dummy) while (1) { rc = wait_event_interruptible(cmm_thread_wait, - (cmm_pages != cmm_pages_target || - cmm_timed_pages != cmm_timed_pages_target || - kthread_should_stop())); + (!cmm_suspended && (cmm_pages != cmm_pages_target || + cmm_timed_pages != cmm_timed_pages_target)) || + kthread_should_stop()); if (kthread_should_stop() || rc == -ERESTARTSYS) { cmm_pages_target = cmm_pages; cmm_timed_pages_target = cmm_timed_pages; @@ -410,6 +412,38 @@ cmm_smsg_target(char *from, char *msg) static struct ctl_table_header *cmm_sysctl_header; +static int cmm_suspend(void) +{ + cmm_suspended = 1; + cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list); + cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list); + return 0; +} + +static int cmm_resume(void) +{ + cmm_suspended = 0; + cmm_kick_thread(); + return 0; +} + +static int cmm_power_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + switch (event) { + case PM_POST_HIBERNATION: + return cmm_resume(); + case PM_HIBERNATION_PREPARE: + return cmm_suspend(); + default: + return NOTIFY_DONE; + } +} + +static struct notifier_block cmm_power_notifier = { + .notifier_call = cmm_power_event, +}; + static int cmm_init (void) { @@ -418,7 +452,7 @@ cmm_init (void) #ifdef CONFIG_CMM_PROC cmm_sysctl_header = register_sysctl_table(cmm_dir_table); if (!cmm_sysctl_header) - goto out; + goto out_sysctl; #endif #ifdef CONFIG_CMM_IUCV rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target); @@ -428,17 +462,21 @@ cmm_init (void) rc = register_oom_notifier(&cmm_oom_nb); if (rc < 0) goto out_oom_notify; + rc = register_pm_notifier(&cmm_power_notifier); + if (rc) + goto out_pm; init_waitqueue_head(&cmm_thread_wait); init_timer(&cmm_timer); cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); rc = IS_ERR(cmm_thread_ptr) ? PTR_ERR(cmm_thread_ptr) : 0; - if (!rc) - goto out; - /* - * kthread_create failed. undo all the stuff from above again. - */ - unregister_oom_notifier(&cmm_oom_nb); + if (rc) + goto out_kthread; + return 0; +out_kthread: + unregister_pm_notifier(&cmm_power_notifier); +out_pm: + unregister_oom_notifier(&cmm_oom_nb); out_oom_notify: #ifdef CONFIG_CMM_IUCV smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target); @@ -446,8 +484,8 @@ out_smsg: #endif #ifdef CONFIG_CMM_PROC unregister_sysctl_table(cmm_sysctl_header); +out_sysctl: #endif -out: return rc; } @@ -455,6 +493,7 @@ static void cmm_exit(void) { kthread_stop(cmm_thread_ptr); + unregister_pm_notifier(&cmm_power_notifier); unregister_oom_notifier(&cmm_oom_nb); cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list); cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 6d507462967a..fc102e70d9c2 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -34,16 +34,15 @@ #include <asm/pgtable.h> #include <asm/s390_ext.h> #include <asm/mmu_context.h> +#include <asm/compat.h> #include "../kernel/entry.h" #ifndef CONFIG_64BIT #define __FAIL_ADDR_MASK 0x7ffff000 -#define __FIXUP_MASK 0x7fffffff #define __SUBCODE_MASK 0x0200 #define __PF_RES_FIELD 0ULL #else /* CONFIG_64BIT */ #define __FAIL_ADDR_MASK -4096L -#define __FIXUP_MASK ~0L #define __SUBCODE_MASK 0x0600 #define __PF_RES_FIELD 0x8000000000000000ULL #endif /* CONFIG_64BIT */ @@ -52,11 +51,15 @@ extern int sysctl_userprocess_debug; #endif -#ifdef CONFIG_KPROBES -static inline int notify_page_fault(struct pt_regs *regs, long err) +#define VM_FAULT_BADCONTEXT 0x010000 +#define VM_FAULT_BADMAP 0x020000 +#define VM_FAULT_BADACCESS 0x040000 + +static inline int notify_page_fault(struct pt_regs *regs) { int ret = 0; +#ifdef CONFIG_KPROBES /* kprobe_running() needs smp_processor_id() */ if (!user_mode(regs)) { preempt_disable(); @@ -64,15 +67,9 @@ static inline int notify_page_fault(struct pt_regs *regs, long err) ret = 1; preempt_enable(); } - +#endif return ret; } -#else -static inline int notify_page_fault(struct pt_regs *regs, long err) -{ - return 0; -} -#endif /* @@ -100,57 +97,50 @@ void bust_spinlocks(int yes) /* * Returns the address space associated with the fault. - * Returns 0 for kernel space, 1 for user space and - * 2 for code execution in user space with noexec=on. + * Returns 0 for kernel space and 1 for user space. */ -static inline int check_space(struct task_struct *tsk) +static inline int user_space_fault(unsigned long trans_exc_code) { /* - * The lowest two bits of S390_lowcore.trans_exc_code - * indicate which paging table was used. + * The lowest two bits of the translation exception + * identification indicate which paging table was used. */ - int desc = S390_lowcore.trans_exc_code & 3; - - if (desc == 3) /* Home Segment Table Descriptor */ - return switch_amode == 0; - if (desc == 2) /* Secondary Segment Table Descriptor */ - return tsk->thread.mm_segment.ar4; -#ifdef CONFIG_S390_SWITCH_AMODE - if (unlikely(desc == 1)) { /* STD determined via access register */ - /* %a0 always indicates primary space. */ - if (S390_lowcore.exc_access_id != 0) { - save_access_regs(tsk->thread.acrs); - /* - * An alet of 0 indicates primary space. - * An alet of 1 indicates secondary space. - * Any other alet values generate an - * alen-translation exception. - */ - if (tsk->thread.acrs[S390_lowcore.exc_access_id]) - return tsk->thread.mm_segment.ar4; - } - } -#endif - /* Primary Segment Table Descriptor */ - return switch_amode << s390_noexec; + trans_exc_code &= 3; + if (trans_exc_code == 2) + /* Access via secondary space, set_fs setting decides */ + return current->thread.mm_segment.ar4; + if (user_mode == HOME_SPACE_MODE) + /* User space if the access has been done via home space. */ + return trans_exc_code == 3; + /* + * If the user space is not the home space the kernel runs in home + * space. Access via secondary space has already been covered, + * access via primary space or access register is from user space + * and access via home space is from the kernel. + */ + return trans_exc_code != 3; } /* * Send SIGSEGV to task. This is an external routine * to keep the stack usage of do_page_fault small. */ -static void do_sigsegv(struct pt_regs *regs, unsigned long error_code, - int si_code, unsigned long address) +static noinline void do_sigsegv(struct pt_regs *regs, long int_code, + int si_code, unsigned long trans_exc_code) { struct siginfo si; + unsigned long address; + address = trans_exc_code & __FAIL_ADDR_MASK; + current->thread.prot_addr = address; + current->thread.trap_no = int_code; #if defined(CONFIG_SYSCTL) || defined(CONFIG_PROCESS_DEBUG) #if defined(CONFIG_SYSCTL) if (sysctl_userprocess_debug) #endif { printk("User process fault: interruption code 0x%lX\n", - error_code); + int_code); printk("failing address: %lX\n", address); show_regs(regs); } @@ -161,13 +151,14 @@ static void do_sigsegv(struct pt_regs *regs, unsigned long error_code, force_sig_info(SIGSEGV, &si, current); } -static void do_no_context(struct pt_regs *regs, unsigned long error_code, - unsigned long address) +static noinline void do_no_context(struct pt_regs *regs, long int_code, + unsigned long trans_exc_code) { const struct exception_table_entry *fixup; + unsigned long address; /* Are we prepared to handle this kernel fault? */ - fixup = search_exception_tables(regs->psw.addr & __FIXUP_MASK); + fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN); if (fixup) { regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE; return; @@ -177,129 +168,149 @@ static void do_no_context(struct pt_regs *regs, unsigned long error_code, * Oops. The kernel tried to access some bad page. We'll have to * terminate things with extreme prejudice. */ - if (check_space(current) == 0) + address = trans_exc_code & __FAIL_ADDR_MASK; + if (!user_space_fault(trans_exc_code)) printk(KERN_ALERT "Unable to handle kernel pointer dereference" " at virtual kernel address %p\n", (void *)address); else printk(KERN_ALERT "Unable to handle kernel paging request" " at virtual user address %p\n", (void *)address); - die("Oops", regs, error_code); + die("Oops", regs, int_code); do_exit(SIGKILL); } -static void do_low_address(struct pt_regs *regs, unsigned long error_code) +static noinline void do_low_address(struct pt_regs *regs, long int_code, + unsigned long trans_exc_code) { /* Low-address protection hit in kernel mode means NULL pointer write access in kernel mode. */ if (regs->psw.mask & PSW_MASK_PSTATE) { /* Low-address protection hit in user mode 'cannot happen'. */ - die ("Low-address protection", regs, error_code); + die ("Low-address protection", regs, int_code); do_exit(SIGKILL); } - do_no_context(regs, error_code, 0); + do_no_context(regs, int_code, trans_exc_code); } -static void do_sigbus(struct pt_regs *regs, unsigned long error_code, - unsigned long address) +static noinline void do_sigbus(struct pt_regs *regs, long int_code, + unsigned long trans_exc_code) { struct task_struct *tsk = current; - struct mm_struct *mm = tsk->mm; - up_read(&mm->mmap_sem); /* * Send a sigbus, regardless of whether we were in kernel * or user mode. */ - tsk->thread.prot_addr = address; - tsk->thread.trap_no = error_code; + tsk->thread.prot_addr = trans_exc_code & __FAIL_ADDR_MASK; + tsk->thread.trap_no = int_code; force_sig(SIGBUS, tsk); - - /* Kernel mode? Handle exceptions or die */ - if (!(regs->psw.mask & PSW_MASK_PSTATE)) - do_no_context(regs, error_code, address); } #ifdef CONFIG_S390_EXEC_PROTECT -static int signal_return(struct mm_struct *mm, struct pt_regs *regs, - unsigned long address, unsigned long error_code) +static noinline int signal_return(struct pt_regs *regs, long int_code, + unsigned long trans_exc_code) { u16 instruction; int rc; -#ifdef CONFIG_COMPAT - int compat; -#endif - pagefault_disable(); rc = __get_user(instruction, (u16 __user *) regs->psw.addr); - pagefault_enable(); - if (rc) - return -EFAULT; - up_read(&mm->mmap_sem); - clear_tsk_thread_flag(current, TIF_SINGLE_STEP); -#ifdef CONFIG_COMPAT - compat = is_compat_task(); - if (compat && instruction == 0x0a77) - sys32_sigreturn(); - else if (compat && instruction == 0x0aad) - sys32_rt_sigreturn(); - else -#endif - if (instruction == 0x0a77) - sys_sigreturn(); - else if (instruction == 0x0aad) - sys_rt_sigreturn(); - else { - current->thread.prot_addr = address; - current->thread.trap_no = error_code; - do_sigsegv(regs, error_code, SEGV_MAPERR, address); - } + if (!rc && instruction == 0x0a77) { + clear_tsk_thread_flag(current, TIF_SINGLE_STEP); + if (is_compat_task()) + sys32_sigreturn(); + else + sys_sigreturn(); + } else if (!rc && instruction == 0x0aad) { + clear_tsk_thread_flag(current, TIF_SINGLE_STEP); + if (is_compat_task()) + sys32_rt_sigreturn(); + else + sys_rt_sigreturn(); + } else + do_sigsegv(regs, int_code, SEGV_MAPERR, trans_exc_code); return 0; } #endif /* CONFIG_S390_EXEC_PROTECT */ +static noinline void do_fault_error(struct pt_regs *regs, long int_code, + unsigned long trans_exc_code, int fault) +{ + int si_code; + + switch (fault) { + case VM_FAULT_BADACCESS: +#ifdef CONFIG_S390_EXEC_PROTECT + if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY && + (trans_exc_code & 3) == 0) { + signal_return(regs, int_code, trans_exc_code); + break; + } +#endif /* CONFIG_S390_EXEC_PROTECT */ + case VM_FAULT_BADMAP: + /* Bad memory access. Check if it is kernel or user space. */ + if (regs->psw.mask & PSW_MASK_PSTATE) { + /* User mode accesses just cause a SIGSEGV */ + si_code = (fault == VM_FAULT_BADMAP) ? + SEGV_MAPERR : SEGV_ACCERR; + do_sigsegv(regs, int_code, si_code, trans_exc_code); + return; + } + case VM_FAULT_BADCONTEXT: + do_no_context(regs, int_code, trans_exc_code); + break; + default: /* fault & VM_FAULT_ERROR */ + if (fault & VM_FAULT_OOM) + pagefault_out_of_memory(); + else if (fault & VM_FAULT_SIGBUS) { + do_sigbus(regs, int_code, trans_exc_code); + /* Kernel mode? Handle exceptions or die */ + if (!(regs->psw.mask & PSW_MASK_PSTATE)) + do_no_context(regs, int_code, trans_exc_code); + } else + BUG(); + break; + } +} + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate * routines. * - * error_code: + * interruption code (int_code): * 04 Protection -> Write-Protection (suprression) * 10 Segment translation -> Not present (nullification) * 11 Page translation -> Not present (nullification) * 3b Region third trans. -> Not present (nullification) */ -static inline void -do_exception(struct pt_regs *regs, unsigned long error_code, int write) +static inline int do_exception(struct pt_regs *regs, int access, + unsigned long trans_exc_code) { struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct *vma; unsigned long address; - int space; - int si_code; int fault; - if (notify_page_fault(regs, error_code)) - return; + if (notify_page_fault(regs)) + return 0; tsk = current; mm = tsk->mm; - /* get the failing address and the affected space */ - address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK; - space = check_space(tsk); - /* * Verify that the fault happened in user space, that * we are not in an interrupt and that there is a * user context. */ - if (unlikely(space == 0 || in_atomic() || !mm)) - goto no_context; + fault = VM_FAULT_BADCONTEXT; + if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm)) + goto out; + address = trans_exc_code & __FAIL_ADDR_MASK; /* * When we get here, the fault happened in the current * task's user address space, so we can switch on the @@ -309,42 +320,26 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int write) perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); down_read(&mm->mmap_sem); - si_code = SEGV_MAPERR; + fault = VM_FAULT_BADMAP; vma = find_vma(mm, address); if (!vma) - goto bad_area; - -#ifdef CONFIG_S390_EXEC_PROTECT - if (unlikely((space == 2) && !(vma->vm_flags & VM_EXEC))) - if (!signal_return(mm, regs, address, error_code)) - /* - * signal_return() has done an up_read(&mm->mmap_sem) - * if it returns 0. - */ - return; -#endif + goto out_up; - if (vma->vm_start <= address) - goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto bad_area; - if (expand_stack(vma, address)) - goto bad_area; -/* - * Ok, we have a good vm_area for this memory access, so - * we can handle it.. - */ -good_area: - si_code = SEGV_ACCERR; - if (!write) { - /* page not present, check vm flags */ - if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) - goto bad_area; - } else { - if (!(vma->vm_flags & VM_WRITE)) - goto bad_area; + if (unlikely(vma->vm_start > address)) { + if (!(vma->vm_flags & VM_GROWSDOWN)) + goto out_up; + if (expand_stack(vma, address)) + goto out_up; } + /* + * Ok, we have a good vm_area for this memory access, so + * we can handle it.. + */ + fault = VM_FAULT_BADACCESS; + if (unlikely(!(vma->vm_flags & access))) + goto out_up; + if (is_vm_hugetlb_page(vma)) address &= HPAGE_MASK; /* @@ -352,18 +347,11 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); - if (unlikely(fault & VM_FAULT_ERROR)) { - if (fault & VM_FAULT_OOM) { - up_read(&mm->mmap_sem); - pagefault_out_of_memory(); - return; - } else if (fault & VM_FAULT_SIGBUS) { - do_sigbus(regs, error_code, address); - return; - } - BUG(); - } + fault = handle_mm_fault(mm, vma, address, + (access == VM_WRITE) ? FAULT_FLAG_WRITE : 0); + if (unlikely(fault & VM_FAULT_ERROR)) + goto out_up; + if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, @@ -373,74 +361,69 @@ good_area: perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, regs, address); } - up_read(&mm->mmap_sem); /* * The instruction that caused the program check will * be repeated. Don't signal single step via SIGTRAP. */ clear_tsk_thread_flag(tsk, TIF_SINGLE_STEP); - return; - -/* - * Something tried to access memory that isn't in our memory map.. - * Fix it, but check if it's kernel or user first.. - */ -bad_area: + fault = 0; +out_up: up_read(&mm->mmap_sem); - - /* User mode accesses just cause a SIGSEGV */ - if (regs->psw.mask & PSW_MASK_PSTATE) { - tsk->thread.prot_addr = address; - tsk->thread.trap_no = error_code; - do_sigsegv(regs, error_code, si_code, address); - return; - } - -no_context: - do_no_context(regs, error_code, address); +out: + return fault; } -void __kprobes do_protection_exception(struct pt_regs *regs, - long error_code) +void __kprobes do_protection_exception(struct pt_regs *regs, long int_code) { + unsigned long trans_exc_code = S390_lowcore.trans_exc_code; + int fault; + /* Protection exception is supressing, decrement psw address. */ - regs->psw.addr -= (error_code >> 16); + regs->psw.addr -= (int_code >> 16); /* * Check for low-address protection. This needs to be treated * as a special case because the translation exception code * field is not guaranteed to contain valid data in this case. */ - if (unlikely(!(S390_lowcore.trans_exc_code & 4))) { - do_low_address(regs, error_code); + if (unlikely(!(trans_exc_code & 4))) { + do_low_address(regs, int_code, trans_exc_code); return; } - do_exception(regs, 4, 1); + fault = do_exception(regs, VM_WRITE, trans_exc_code); + if (unlikely(fault)) + do_fault_error(regs, 4, trans_exc_code, fault); } -void __kprobes do_dat_exception(struct pt_regs *regs, long error_code) +void __kprobes do_dat_exception(struct pt_regs *regs, long int_code) { - do_exception(regs, error_code & 0xff, 0); + unsigned long trans_exc_code = S390_lowcore.trans_exc_code; + int access, fault; + + access = VM_READ | VM_EXEC | VM_WRITE; +#ifdef CONFIG_S390_EXEC_PROTECT + if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY && + (trans_exc_code & 3) == 0) + access = VM_EXEC; +#endif + fault = do_exception(regs, access, trans_exc_code); + if (unlikely(fault)) + do_fault_error(regs, int_code & 255, trans_exc_code, fault); } #ifdef CONFIG_64BIT -void __kprobes do_asce_exception(struct pt_regs *regs, unsigned long error_code) +void __kprobes do_asce_exception(struct pt_regs *regs, long int_code) { - struct mm_struct *mm; + unsigned long trans_exc_code = S390_lowcore.trans_exc_code; + struct mm_struct *mm = current->mm; struct vm_area_struct *vma; - unsigned long address; - int space; - - mm = current->mm; - address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK; - space = check_space(current); - if (unlikely(space == 0 || in_atomic() || !mm)) + if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm)) goto no_context; local_irq_enable(); down_read(&mm->mmap_sem); - vma = find_vma(mm, address); + vma = find_vma(mm, trans_exc_code & __FAIL_ADDR_MASK); up_read(&mm->mmap_sem); if (vma) { @@ -450,17 +433,38 @@ void __kprobes do_asce_exception(struct pt_regs *regs, unsigned long error_code) /* User mode accesses just cause a SIGSEGV */ if (regs->psw.mask & PSW_MASK_PSTATE) { - current->thread.prot_addr = address; - current->thread.trap_no = error_code; - do_sigsegv(regs, error_code, SEGV_MAPERR, address); + do_sigsegv(regs, int_code, SEGV_MAPERR, trans_exc_code); return; } no_context: - do_no_context(regs, error_code, address); + do_no_context(regs, int_code, trans_exc_code); } #endif +int __handle_fault(unsigned long uaddr, unsigned long int_code, int write_user) +{ + struct pt_regs regs; + int access, fault; + + regs.psw.mask = psw_kernel_bits; + if (!irqs_disabled()) + regs.psw.mask |= PSW_MASK_IO | PSW_MASK_EXT; + regs.psw.addr = (unsigned long) __builtin_return_address(0); + regs.psw.addr |= PSW_ADDR_AMODE; + uaddr &= PAGE_MASK; + access = write_user ? VM_WRITE : VM_READ; + fault = do_exception(®s, access, uaddr | 2); + if (unlikely(fault)) { + if (fault & VM_FAULT_OOM) { + pagefault_out_of_memory(); + fault = 0; + } else if (fault & VM_FAULT_SIGBUS) + do_sigbus(®s, int_code, uaddr); + } + return fault ? -EFAULT : 0; +} + #ifdef CONFIG_PFAULT /* * 'pfault' pseudo page faults routines. @@ -522,7 +526,7 @@ void pfault_fini(void) : : "a" (&refbk), "m" (refbk) : "cc"); } -static void pfault_interrupt(__u16 error_code) +static void pfault_interrupt(__u16 int_code) { struct task_struct *tsk; __u16 subcode; diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 2757c5616a07..ad621e06ada3 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -269,7 +269,7 @@ int s390_enable_sie(void) struct mm_struct *mm, *old_mm; /* Do we have switched amode? If no, we cannot do sie */ - if (!switch_amode) + if (user_mode == HOME_SPACE_MODE) return -EINVAL; /* Do we have pgstes? if yes, we are done */ diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index 5f91a38d7592..300ab012b0fd 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -70,8 +70,12 @@ static pte_t __ref *vmem_pte_alloc(void) pte = alloc_bootmem(PTRS_PER_PTE * sizeof(pte_t)); if (!pte) return NULL; - clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY, - PTRS_PER_PTE * sizeof(pte_t)); + if (MACHINE_HAS_HPAGE) + clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY | _PAGE_CO, + PTRS_PER_PTE * sizeof(pte_t)); + else + clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY, + PTRS_PER_PTE * sizeof(pte_t)); return pte; } @@ -112,7 +116,8 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro) if (MACHINE_HAS_HPAGE && !(address & ~HPAGE_MASK) && (address + HPAGE_SIZE <= start + size) && (address >= HPAGE_SIZE)) { - pte_val(pte) |= _SEGMENT_ENTRY_LARGE; + pte_val(pte) |= _SEGMENT_ENTRY_LARGE | + _SEGMENT_ENTRY_CO; pmd_val(*pm_dir) = pte_val(pte); address += HPAGE_SIZE - PAGE_SIZE; continue; diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c index 001249469866..856ed68a58e6 100644 --- a/arch/score/kernel/sys_score.c +++ b/arch/score/kernel/sys_score.c @@ -36,34 +36,16 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - int error = -EBADF; - struct file *file = NULL; - - if (pgoff & (~PAGE_MASK >> 12)) - return -EINVAL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - return error; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - - return error; + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); } asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, off_t pgoff) + unsigned long flags, unsigned long fd, off_t offset) { - return sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); + if (unlikely(offset & ~PAGE_MASK)) + return -EINVAL; + return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); } asmlinkage long diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 88cdeb9f72d9..0031a6979f3a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -16,7 +16,9 @@ config SUPERH select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG + select HAVE_DMA_ATTRS select HAVE_PERF_EVENTS + select PERF_USE_VMALLOC select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA @@ -37,6 +39,7 @@ config SUPERH32 select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACE_MCOUNT_TEST + select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE select HAVE_FUNCTION_GRAPH_TRACER select HAVE_ARCH_KGDB select ARCH_HIBERNATION_POSSIBLE if MMU @@ -170,6 +173,12 @@ config ARCH_HAS_CPU_IDLE_WAIT config IO_TRAPPED bool +config DMA_COHERENT + bool + +config DMA_NONCOHERENT + def_bool !DMA_COHERENT + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -220,6 +229,7 @@ config CPU_SHX2 config CPU_SHX3 bool + select DMA_COHERENT config ARCH_SHMOBILE bool @@ -761,17 +771,6 @@ config ENTRY_OFFSET default "0x00010000" if PAGE_SIZE_64KB default "0x00000000" -config UBC_WAKEUP - bool "Wakeup UBC on startup" - depends on CPU_SH4 && !CPU_SH4A - help - Selecting this option will wakeup the User Break Controller (UBC) on - startup. Although the UBC is left in an awake state when the processor - comes up, some boot loaders misbehave by putting the UBC to sleep in a - power saving state, which causes issues with things like ptrace(). - - If unsure, say N. - choice prompt "Kernel command line" optional @@ -818,7 +817,13 @@ config MAPLE Dreamcast with a serial line terminal or a remote network connection. -source "arch/sh/drivers/pci/Kconfig" +config PCI + bool "PCI support" + depends on SYS_SUPPORTS_PCI + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. If you have PCI, say Y, otherwise N. source "drivers/pci/pcie/Kconfig" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 66e40aabc600..ac17c5ac550e 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -78,6 +78,9 @@ defaultimage-$(CONFIG_SUPERH32) := zImage defaultimage-$(CONFIG_SH_SH7785LCR) := uImage defaultimage-$(CONFIG_SH_RSK) := uImage defaultimage-$(CONFIG_SH_URQUELL) := uImage +defaultimage-$(CONFIG_SH_MIGOR) := uImage +defaultimage-$(CONFIG_SH_AP325RXA) := uImage +defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux @@ -136,6 +139,7 @@ machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705 machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander machdir-$(CONFIG_SH_MIGOR) += mach-migor +machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa machdir-$(CONFIG_SH_KFR2R09) += mach-kfr2r09 machdir-$(CONFIG_SH_ECOVEC) += mach-ecovec24 machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index 7baa21090231..ce0f26381784 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -1,7 +1,6 @@ # # Specific board support, not covered by a mach group. # -obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o obj-$(CONFIG_SH_URQUELL) += board-urquell.o diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile new file mode 100644 index 000000000000..4cf1774d2613 --- /dev/null +++ b/arch/sh/boards/mach-ap325rxa/Makefile @@ -0,0 +1,2 @@ +obj-y := setup.o sdram.o + diff --git a/arch/sh/boards/mach-ap325rxa/sdram.S b/arch/sh/boards/mach-ap325rxa/sdram.S new file mode 100644 index 000000000000..db24fbed4fca --- /dev/null +++ b/arch/sh/boards/mach-ap325rxa/sdram.S @@ -0,0 +1,69 @@ +/* + * AP325RXA sdram self/auto-refresh setup code + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sys.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/suspend.h> +#include <asm/romimage-macros.h> + +/* code to enter and leave self-refresh. must be self-contained. + * this code will be copied to on-chip memory and executed from there. + */ + .balign 4 +ENTRY(ap325rxa_sdram_enter_start) + + /* SBSC: disable power down and put in self-refresh mode */ + mov.l 1f, r4 + mov.l 2f, r1 + mov.l @r4, r2 + or r1, r2 + mov.l 3f, r3 + and r3, r2 + mov.l r2, @r4 + + rts + nop + + .balign 4 +1: .long 0xfe400008 /* SDCR0 */ +2: .long 0x00000400 +3: .long 0xffff7fff +ENTRY(ap325rxa_sdram_enter_end) + + .balign 4 +ENTRY(ap325rxa_sdram_leave_start) + + /* SBSC: set auto-refresh mode */ + mov.l 1f, r4 + mov.l @r4, r0 + mov.l 4f, r1 + and r1, r0 + mov.l r0, @r4 + mov.l 6f, r4 + mov.l 8f, r0 + mov.l @r4, r1 + mov #-1, r4 + add r4, r1 + or r1, r0 + mov.l 7f, r1 + mov.l r0, @r1 + + rts + nop + + .balign 4 +1: .long 0xfe400008 /* SDCR0 */ +4: .long 0xfffffbff +6: .long 0xfe40001c /* RTCOR */ +7: .long 0xfe400018 /* RTCNT */ +8: .long 0xa55a0000 +ENTRY(ap325rxa_sdram_leave_end) diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/mach-ap325rxa/setup.c index 2d080732a964..cf9dc12dfeb1 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -20,8 +20,6 @@ #include <linux/i2c.h> #include <linux/smsc911x.h> #include <linux/gpio.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> #include <media/ov772x.h> #include <media/soc_camera.h> #include <media/soc_camera_platform.h> @@ -29,6 +27,7 @@ #include <video/sh_mobile_lcdc.h> #include <asm/io.h> #include <asm/clock.h> +#include <asm/suspend.h> #include <cpu/sh7723.h> static struct smsc911x_platform_config smsc911x_config = { @@ -409,17 +408,49 @@ static struct platform_device ceu_device = { }, }; -struct spi_gpio_platform_data sdcard_cn3_platform_data = { - .sck = GPIO_PTD0, - .mosi = GPIO_PTD1, - .miso = GPIO_PTD2, - .num_chipselect = 1, +static struct resource sdhi0_cn3_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0x04ce0000, + .end = 0x04ce01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 101, + .flags = IORESOURCE_IRQ, + }, }; -static struct platform_device sdcard_cn3_device = { - .name = "spi_gpio", - .dev = { - .platform_data = &sdcard_cn3_platform_data, +static struct platform_device sdhi0_cn3_device = { + .name = "sh_mobile_sdhi", + .id = 0, /* "sdhi0" clock */ + .num_resources = ARRAY_SIZE(sdhi0_cn3_resources), + .resource = sdhi0_cn3_resources, + .archdata = { + .hwblk_id = HWBLK_SDHI0, + }, +}; + +static struct resource sdhi1_cn7_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0x04cf0000, + .end = 0x04cf01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 24, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_cn7_device = { + .name = "sh_mobile_sdhi", + .id = 1, /* "sdhi1" clock */ + .num_resources = ARRAY_SIZE(sdhi1_cn7_resources), + .resource = sdhi1_cn7_resources, + .archdata = { + .hwblk_id = HWBLK_SDHI1, }, }; @@ -470,22 +501,26 @@ static struct platform_device *ap325rxa_devices[] __initdata = { &lcdc_device, &ceu_device, &nand_flash_device, - &sdcard_cn3_device, + &sdhi0_cn3_device, + &sdhi1_cn7_device, &ap325rxa_camera[0], &ap325rxa_camera[1], }; -static struct spi_board_info ap325rxa_spi_devices[] = { - { - .modalias = "mmc_spi", - .max_speed_hz = 5000000, - .chip_select = 0, - .controller_data = (void *) GPIO_PTD5, - }, -}; +extern char ap325rxa_sdram_enter_start; +extern char ap325rxa_sdram_enter_end; +extern char ap325rxa_sdram_leave_start; +extern char ap325rxa_sdram_leave_end; static int __init ap325rxa_devices_setup(void) { + /* register board specific self-refresh code */ + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + &ap325rxa_sdram_enter_start, + &ap325rxa_sdram_enter_end, + &ap325rxa_sdram_leave_start, + &ap325rxa_sdram_leave_end); + /* LD3 and LD4 LEDs */ gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_direction_output(GPIO_PTX5, 1); @@ -578,12 +613,28 @@ static int __init ap325rxa_devices_setup(void) platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); + /* SDHI0 - CN3 - SD CARD */ + gpio_request(GPIO_FN_SDHI0CD_PTD, NULL); + gpio_request(GPIO_FN_SDHI0WP_PTD, NULL); + gpio_request(GPIO_FN_SDHI0D3_PTD, NULL); + gpio_request(GPIO_FN_SDHI0D2_PTD, NULL); + gpio_request(GPIO_FN_SDHI0D1_PTD, NULL); + gpio_request(GPIO_FN_SDHI0D0_PTD, NULL); + gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL); + gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL); + + /* SDHI1 - CN7 - MICRO SD CARD */ + gpio_request(GPIO_FN_SDHI1CD, NULL); + gpio_request(GPIO_FN_SDHI1D3, NULL); + gpio_request(GPIO_FN_SDHI1D2, NULL); + gpio_request(GPIO_FN_SDHI1D1, NULL); + gpio_request(GPIO_FN_SDHI1D0, NULL); + gpio_request(GPIO_FN_SDHI1CMD, NULL); + gpio_request(GPIO_FN_SDHI1CLK, NULL); + i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); - spi_register_board_info(ap325rxa_spi_devices, - ARRAY_SIZE(ap325rxa_spi_devices)); - return platform_add_devices(ap325rxa_devices, ARRAY_SIZE(ap325rxa_devices)); } diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile index 51f852151655..e69bc82208fc 100644 --- a/arch/sh/boards/mach-ecovec24/Makefile +++ b/arch/sh/boards/mach-ecovec24/Makefile @@ -6,4 +6,4 @@ # for more details. # -obj-y := setup.o
\ No newline at end of file +obj-y := setup.o sdram.o
\ No newline at end of file diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S new file mode 100644 index 000000000000..833440044407 --- /dev/null +++ b/arch/sh/boards/mach-ecovec24/sdram.S @@ -0,0 +1,52 @@ +/* + * Ecovec24 sdram self/auto-refresh setup code + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sys.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/suspend.h> +#include <asm/romimage-macros.h> + +/* code to enter and leave self-refresh. must be self-contained. + * this code will be copied to on-chip memory and executed from there. + */ + .balign 4 +ENTRY(ecovec24_sdram_enter_start) + + /* DBSC: put memory in self-refresh mode */ + + ED 0xFD000010, 0x00000000 /* DBEN */ + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ + + rts + nop + +ENTRY(ecovec24_sdram_enter_end) + + .balign 4 +ENTRY(ecovec24_sdram_leave_start) + + /* DBSC: put memory in auto-refresh mode */ + + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + WAIT 1 + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000010, 0x00000001 /* DBEN */ + ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ + + rts + nop + +ENTRY(ecovec24_sdram_leave_end) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 3b1ceb46fa54..826e62326d51 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -20,12 +20,14 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/input.h> +#include <linux/input/sh_keysc.h> +#include <linux/mfd/sh_mobile_sdhi.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <asm/heartbeat.h> #include <asm/sh_eth.h> -#include <asm/sh_keysc.h> #include <asm/clock.h> +#include <asm/suspend.h> #include <cpu/sh7724.h> /* @@ -147,6 +149,9 @@ static struct platform_device sh_eth_device = { }, .num_resources = ARRAY_SIZE(sh_eth_resources), .resource = sh_eth_resources, + .archdata = { + .hwblk_id = HWBLK_ETHER, + }, }; /* USB0 host */ @@ -185,30 +190,18 @@ static struct platform_device usb0_host_device = { .resource = usb0_host_resources, }; -/* - * USB1 - * - * CN5 can use both host/function, - * and we can determine it by checking PTB[3] - * - * This time only USB1 host is supported. - */ +/* USB1 host/function */ void usb1_port_power(int port, int power) { - if (!gpio_get_value(GPIO_PTB3)) { - printk(KERN_ERR "USB1 function is not supported\n"); - return; - } - gpio_set_value(GPIO_PTB5, power); } -static struct r8a66597_platdata usb1_host_data = { +static struct r8a66597_platdata usb1_common_data = { .on_chip = 1, .port_power = usb1_port_power, }; -static struct resource usb1_host_resources[] = { +static struct resource usb1_common_resources[] = { [0] = { .start = 0xa4d90000, .end = 0xa4d90124 - 1, @@ -221,16 +214,16 @@ static struct resource usb1_host_resources[] = { }, }; -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", +static struct platform_device usb1_common_device = { + /* .name will be added in arch_setup */ .id = 1, .dev = { .dma_mask = NULL, /* not use dma */ .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, + .platform_data = &usb1_common_data, }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, + .num_resources = ARRAY_SIZE(usb1_common_resources), + .resource = usb1_common_resources, }; /* LCDC */ @@ -428,16 +421,90 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +/* SHDI0 */ +static void sdhi0_set_pwr(struct platform_device *pdev, int state) +{ + gpio_set_value(GPIO_PTB6, state); +} + +static struct sh_mobile_sdhi_info sdhi0_info = { + .set_pwr = sdhi0_set_pwr, +}; + +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0x04ce0000, + .end = 0x04ce01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 101, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .id = 0, + .dev = { + .platform_data = &sdhi0_info, + }, + .archdata = { + .hwblk_id = HWBLK_SDHI0, + }, +}; + +/* SHDI1 */ +static void sdhi1_set_pwr(struct platform_device *pdev, int state) +{ + gpio_set_value(GPIO_PTB7, state); +} + +static struct sh_mobile_sdhi_info sdhi1_info = { + .set_pwr = sdhi1_set_pwr, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0x04cf0000, + .end = 0x04cf01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 24, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, + .id = 1, + .dev = { + .platform_data = &sdhi1_info, + }, + .archdata = { + .hwblk_id = HWBLK_SDHI1, + }, +}; + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, &sh_eth_device, &usb0_host_device, - &usb1_host_device, /* USB1 host support */ + &usb1_common_device, &lcdc_device, &ceu0_device, &ceu1_device, &keysc_device, + &sdhi0_device, + &sdhi1_device, }; #define EEPROM_ADDR 0x50 @@ -466,12 +533,9 @@ static u8 mac_read(struct i2c_adapter *a, u8 command) return buf; } -#define MAC_LEN 6 -static void __init sh_eth_init(void) +static void __init sh_eth_init(struct sh_eth_plat_data *pd) { struct i2c_adapter *a = i2c_get_adapter(1); - struct clk *eth_clk; - u8 mac[MAC_LEN]; int i; if (!a) { @@ -479,39 +543,30 @@ static void __init sh_eth_init(void) return; } - eth_clk = clk_get(NULL, "eth0"); - if (!eth_clk) { - pr_err("can not get eth0 clk\n"); - return; - } - /* read MAC address frome EEPROM */ - for (i = 0; i < MAC_LEN; i++) { - mac[i] = mac_read(a, 0x10 + i); + for (i = 0; i < sizeof(pd->mac_addr); i++) { + pd->mac_addr[i] = mac_read(a, 0x10 + i); msleep(10); } - - /* clock enable */ - clk_enable(eth_clk); - - /* reset sh-eth */ - ctrl_outl(0x1, SH_ETH_ADDR + 0x0); - - /* set MAC addr */ - ctrl_outl((mac[0] << 24) | - (mac[1] << 16) | - (mac[2] << 8) | - (mac[3] << 0), SH_ETH_MAHR); - ctrl_outl((mac[4] << 8) | - (mac[5] << 0), SH_ETH_MALR); - - clk_put(eth_clk); } #define PORT_HIZA 0xA4050158 #define IODRIVEA 0xA405018A + +extern char ecovec24_sdram_enter_start; +extern char ecovec24_sdram_enter_end; +extern char ecovec24_sdram_leave_start; +extern char ecovec24_sdram_leave_end; + static int __init arch_setup(void) { + /* register board specific self-refresh code */ + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + &ecovec24_sdram_enter_start, + &ecovec24_sdram_enter_end, + &ecovec24_sdram_leave_start, + &ecovec24_sdram_leave_end); + /* enable STATUS0, STATUS2 and PDSTATUS */ gpio_request(GPIO_FN_STATUS0, NULL); gpio_request(GPIO_FN_STATUS2, NULL); @@ -561,6 +616,14 @@ static int __init arch_setup(void) ctrl_outw(0x0600, 0xa40501d4); ctrl_outw(0x0600, 0xa4050192); + if (gpio_get_value(GPIO_PTB3)) { + printk(KERN_INFO "USB1 function is selected\n"); + usb1_common_device.name = "r8a66597_udc"; + } else { + printk(KERN_INFO "USB1 host is selected\n"); + usb1_common_device.name = "r8a66597_hcd"; + } + /* enable LCDC */ gpio_request(GPIO_FN_LCDD23, NULL); gpio_request(GPIO_FN_LCDD22, NULL); @@ -603,8 +666,8 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTR1, 0); gpio_direction_output(GPIO_PTA2, 0); - /* I/O buffer drive ability is low */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA); + /* I/O buffer drive ability is high */ + ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); if (gpio_get_value(GPIO_PTE6)) { /* DVI */ @@ -710,6 +773,33 @@ static int __init arch_setup(void) gpio_direction_input(GPIO_PTR5); gpio_direction_input(GPIO_PTR6); + /* enable SDHI0 (needs DS2.4 set to ON) */ + gpio_request(GPIO_FN_SDHI0CD, NULL); + gpio_request(GPIO_FN_SDHI0WP, NULL); + gpio_request(GPIO_FN_SDHI0CMD, NULL); + gpio_request(GPIO_FN_SDHI0CLK, NULL); + gpio_request(GPIO_FN_SDHI0D3, NULL); + gpio_request(GPIO_FN_SDHI0D2, NULL); + gpio_request(GPIO_FN_SDHI0D1, NULL); + gpio_request(GPIO_FN_SDHI0D0, NULL); + gpio_request(GPIO_PTB6, NULL); + gpio_direction_output(GPIO_PTB6, 0); + + /* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */ + gpio_request(GPIO_FN_SDHI1CD, NULL); + gpio_request(GPIO_FN_SDHI1WP, NULL); + gpio_request(GPIO_FN_SDHI1CMD, NULL); + gpio_request(GPIO_FN_SDHI1CLK, NULL); + gpio_request(GPIO_FN_SDHI1D3, NULL); + gpio_request(GPIO_FN_SDHI1D2, NULL); + gpio_request(GPIO_FN_SDHI1D1, NULL); + gpio_request(GPIO_FN_SDHI1D0, NULL); + gpio_request(GPIO_PTB7, NULL); + gpio_direction_output(GPIO_PTB7, 0); + + /* I/O buffer drive ability is high for SDHI1 */ + ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); + /* enable I2C device */ i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); @@ -721,12 +811,11 @@ arch_initcall(arch_setup); static int __init devices_setup(void) { - sh_eth_init(); + sh_eth_init(&sh_eth_plat); return 0; } device_initcall(devices_setup); - static struct sh_machine_vector mv_ecovec __initmv = { .mv_name = "R0P7724 (EcoVec)", }; diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index 566e69d8d729..f663c14d8885 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -384,7 +384,7 @@ static unsigned char irl2irq[HL_NR_IRL]; static int highlander_irq_demux(int irq) { - if (irq >= HL_NR_IRL || !irl2irq[irq]) + if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq]) return irq; return irl2irq[irq]; diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile index 5d5867826e3b..4e577a3bf658 100644 --- a/arch/sh/boards/mach-kfr2r09/Makefile +++ b/arch/sh/boards/mach-kfr2r09/Makefile @@ -1,2 +1,2 @@ -obj-y := setup.o +obj-y := setup.o sdram.o obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o diff --git a/arch/sh/boards/mach-kfr2r09/sdram.S b/arch/sh/boards/mach-kfr2r09/sdram.S new file mode 100644 index 000000000000..0c9f55bec2fe --- /dev/null +++ b/arch/sh/boards/mach-kfr2r09/sdram.S @@ -0,0 +1,80 @@ +/* + * KFR2R09 sdram self/auto-refresh setup code + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sys.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/suspend.h> +#include <asm/romimage-macros.h> + +/* code to enter and leave self-refresh. must be self-contained. + * this code will be copied to on-chip memory and executed from there. + */ + .balign 4 +ENTRY(kfr2r09_sdram_enter_start) + + /* DBSC: put memory in self-refresh mode */ + + ED 0xFD000010, 0x00000000 /* DBEN */ + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ + + rts + nop + +ENTRY(kfr2r09_sdram_enter_end) + + .balign 4 +ENTRY(kfr2r09_sdram_leave_start) + + /* DBSC: put memory in auto-refresh mode */ + + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_RSTANDBY, r0 + bf resume_rstandby + + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + WAIT 1 + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000010, 0x00000001 /* DBEN */ + ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ + + rts + nop + +resume_rstandby: + + /* DBSC: re-initialize and put in auto-refresh */ + + ED 0xFD000108, 0x40000301 /* DBPDCNT0 */ + ED 0xFD000020, 0x011B0002 /* DBCONF */ + ED 0xFD000030, 0x03060E02 /* DBTR0 */ + ED 0xFD000034, 0x01020102 /* DBTR1 */ + ED 0xFD000038, 0x01090406 /* DBTR2 */ + ED 0xFD000008, 0x00000004 /* DBKIND */ + ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + ED 0xFD000018, 0x00000001 /* DBCKECNT */ + WAIT 1 + ED 0xFD000010, 0x00000001 /* DBEN */ + ED 0xFD000044, 0x000004AF /* DBRFPDN1 */ + ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000108, 0x40000300 /* DBPDCNT0 */ + ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ + + rts + nop + +ENTRY(kfr2r09_sdram_leave_end) diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index c08d33fe2104..87438d6603d6 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -16,13 +16,16 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/input/sh_keysc.h> #include <linux/i2c.h> #include <linux/usb/r8a66597.h> +#include <media/soc_camera.h> +#include <media/sh_mobile_ceu.h> #include <video/sh_mobile_lcdc.h> +#include <asm/suspend.h> #include <asm/clock.h> #include <asm/machvec.h> #include <asm/io.h> -#include <asm/sh_keysc.h> #include <cpu/sh7724.h> #include <mach/kfr2r09.h> @@ -212,11 +215,154 @@ static struct platform_device kfr2r09_usb0_gadget_device = { .resource = kfr2r09_usb0_gadget_resources, }; +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SH_CEU_FLAG_USE_8BIT_BUS, +}; + +static struct resource kfr2r09_ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .end = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device kfr2r09_ceu_device = { + .name = "sh_mobile_ceu", + .id = 0, /* "ceu0" clock */ + .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources), + .resource = kfr2r09_ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, + .archdata = { + .hwblk_id = HWBLK_CEU0, + }, +}; + +static struct i2c_board_info kfr2r09_i2c_camera = { + I2C_BOARD_INFO("rj54n1cb0c", 0x50), +}; + +static struct clk *camera_clk; + +#define DRVCRB 0xA405018C +static int camera_power(struct device *dev, int mode) +{ + int ret; + + if (mode) { + long rate; + + camera_clk = clk_get(NULL, "video_clk"); + if (IS_ERR(camera_clk)) + return PTR_ERR(camera_clk); + + /* set VIO_CKO clock to 25MHz */ + rate = clk_round_rate(camera_clk, 25000000); + ret = clk_set_rate(camera_clk, rate); + if (ret < 0) + goto eclkrate; + + /* set DRVCRB + * + * use 1.8 V for VccQ_VIO + * use 2.85V for VccQ_SR + */ + ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); + + /* reset clear */ + ret = gpio_request(GPIO_PTB4, NULL); + if (ret < 0) + goto eptb4; + ret = gpio_request(GPIO_PTB7, NULL); + if (ret < 0) + goto eptb7; + + ret = gpio_direction_output(GPIO_PTB4, 1); + if (!ret) + ret = gpio_direction_output(GPIO_PTB7, 1); + if (ret < 0) + goto egpioout; + msleep(1); + + ret = clk_enable(camera_clk); /* start VIO_CKO */ + if (ret < 0) + goto eclkon; + + return 0; + } + + ret = 0; + + clk_disable(camera_clk); +eclkon: + gpio_set_value(GPIO_PTB7, 0); +egpioout: + gpio_set_value(GPIO_PTB4, 0); + gpio_free(GPIO_PTB7); +eptb7: + gpio_free(GPIO_PTB4); +eptb4: +eclkrate: + clk_put(camera_clk); + return ret; +} + +static struct soc_camera_link rj54n1_link = { + .power = camera_power, + .board_info = &kfr2r09_i2c_camera, + .i2c_adapter_id = 1, + .module_name = "rj54n1cb0c", +}; + +static struct platform_device kfr2r09_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &rj54n1_link, + }, +}; + +static struct resource kfr2r09_sh_sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0x04ce0000, + .end = 0x04ce01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 101, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kfr2r09_sh_sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources), + .resource = kfr2r09_sh_sdhi0_resources, + .archdata = { + .hwblk_id = HWBLK_SDHI0, + }, +}; + static struct platform_device *kfr2r09_devices[] __initdata = { &kfr2r09_nor_flash_device, &kfr2r09_nand_flash_device, &kfr2r09_sh_keysc_device, &kfr2r09_sh_lcdc_device, + &kfr2r09_ceu_device, + &kfr2r09_camera, + &kfr2r09_sh_sdhi0_device, }; #define BSC_CS0BCR 0xfec10004 @@ -268,11 +414,59 @@ static int kfr2r09_usb0_gadget_i2c_setup(void) return 0; } + +static int kfr2r09_serial_i2c_setup(void) +{ + struct i2c_adapter *a; + struct i2c_msg msg; + unsigned char buf[2]; + int ret; + + a = i2c_get_adapter(0); + if (!a) + return -ENODEV; + + /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */ + buf[0] = 0x13; + msg.addr = 0x09; + msg.buf = buf; + msg.len = 1; + msg.flags = 0; + ret = i2c_transfer(a, &msg, 1); + if (ret != 1) + return -ENODEV; + + buf[0] = 0; + msg.addr = 0x09; + msg.buf = buf; + msg.len = 1; + msg.flags = I2C_M_RD; + ret = i2c_transfer(a, &msg, 1); + if (ret != 1) + return -ENODEV; + + buf[1] = buf[0] | (1 << 6); + buf[0] = 0x13; + msg.addr = 0x09; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + ret = i2c_transfer(a, &msg, 1); + if (ret != 1) + return -ENODEV; + + return 0; +} #else static int kfr2r09_usb0_gadget_i2c_setup(void) { return -ENODEV; } + +static int kfr2r09_serial_i2c_setup(void) +{ + return -ENODEV; +} #endif static int kfr2r09_usb0_gadget_setup(void) @@ -299,11 +493,27 @@ static int kfr2r09_usb0_gadget_setup(void) return 0; } +extern char kfr2r09_sdram_enter_start; +extern char kfr2r09_sdram_enter_end; +extern char kfr2r09_sdram_leave_start; +extern char kfr2r09_sdram_leave_end; + static int __init kfr2r09_devices_setup(void) { + /* register board specific self-refresh code */ + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | + SUSP_SH_RSTANDBY, + &kfr2r09_sdram_enter_start, + &kfr2r09_sdram_enter_end, + &kfr2r09_sdram_leave_start, + &kfr2r09_sdram_leave_end); + /* enable SCIF1 serial port for YC401 console support */ gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL); + kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */ + gpio_request(GPIO_PTG3, NULL); /* HPON_ON */ + gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */ /* setup NOR flash at CS0 */ ctrl_outl(0x36db0400, BSC_CS0BCR); @@ -361,6 +571,32 @@ static int __init kfr2r09_devices_setup(void) if (kfr2r09_usb0_gadget_setup() == 0) platform_device_register(&kfr2r09_usb0_gadget_device); + /* CEU */ + gpio_request(GPIO_FN_VIO_CKO, NULL); + gpio_request(GPIO_FN_VIO0_CLK, NULL); + gpio_request(GPIO_FN_VIO0_VD, NULL); + gpio_request(GPIO_FN_VIO0_HD, NULL); + gpio_request(GPIO_FN_VIO0_FLD, NULL); + gpio_request(GPIO_FN_VIO0_D7, NULL); + gpio_request(GPIO_FN_VIO0_D6, NULL); + gpio_request(GPIO_FN_VIO0_D5, NULL); + gpio_request(GPIO_FN_VIO0_D4, NULL); + gpio_request(GPIO_FN_VIO0_D3, NULL); + gpio_request(GPIO_FN_VIO0_D2, NULL); + gpio_request(GPIO_FN_VIO0_D1, NULL); + gpio_request(GPIO_FN_VIO0_D0, NULL); + + platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20); + + /* SDHI0 connected to yc304 */ + gpio_request(GPIO_FN_SDHI0CD, NULL); + gpio_request(GPIO_FN_SDHI0D3, NULL); + gpio_request(GPIO_FN_SDHI0D2, NULL); + gpio_request(GPIO_FN_SDHI0D1, NULL); + gpio_request(GPIO_FN_SDHI0D0, NULL); + gpio_request(GPIO_FN_SDHI0CMD, NULL); + gpio_request(GPIO_FN_SDHI0CLK, NULL); + return platform_add_devices(kfr2r09_devices, ARRAY_SIZE(kfr2r09_devices)); } diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile index 5f231dd25c0e..4601a89e5ac7 100644 --- a/arch/sh/boards/mach-migor/Makefile +++ b/arch/sh/boards/mach-migor/Makefile @@ -1,2 +1,2 @@ -obj-y := setup.o +obj-y := setup.o sdram.o obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o diff --git a/arch/sh/boards/mach-migor/sdram.S b/arch/sh/boards/mach-migor/sdram.S new file mode 100644 index 000000000000..614aa3a1398c --- /dev/null +++ b/arch/sh/boards/mach-migor/sdram.S @@ -0,0 +1,69 @@ +/* + * Migo-R sdram self/auto-refresh setup code + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sys.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/suspend.h> +#include <asm/romimage-macros.h> + +/* code to enter and leave self-refresh. must be self-contained. + * this code will be copied to on-chip memory and executed from there. + */ + .balign 4 +ENTRY(migor_sdram_enter_start) + + /* SBSC: disable power down and put in self-refresh mode */ + mov.l 1f, r4 + mov.l 2f, r1 + mov.l @r4, r2 + or r1, r2 + mov.l 3f, r3 + and r3, r2 + mov.l r2, @r4 + + rts + nop + + .balign 4 +1: .long 0xfe400008 /* SDCR0 */ +2: .long 0x00000400 +3: .long 0xffff7fff +ENTRY(migor_sdram_enter_end) + + .balign 4 +ENTRY(migor_sdram_leave_start) + + /* SBSC: set auto-refresh mode */ + mov.l 1f, r4 + mov.l @r4, r0 + mov.l 4f, r1 + and r1, r0 + mov.l r0, @r4 + mov.l 6f, r4 + mov.l 8f, r0 + mov.l @r4, r1 + mov #-1, r4 + add r4, r1 + or r1, r0 + mov.l 7f, r1 + mov.l r0, @r1 + + rts + nop + + .balign 4 +1: .long 0xfe400008 /* SDCR0 */ +4: .long 0xfffffbff +6: .long 0xfe40001c /* RTCOR */ +7: .long 0xfe400018 /* RTCNT */ +8: .long 0xa55a0000 +ENTRY(migor_sdram_leave_end) diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 6ed1fd32369e..9099b6da9957 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -11,6 +11,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/input.h> +#include <linux/input/sh_keysc.h> #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> @@ -18,8 +19,6 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/gpio.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <media/ov772x.h> @@ -27,7 +26,7 @@ #include <asm/clock.h> #include <asm/machvec.h> #include <asm/io.h> -#include <asm/sh_keysc.h> +#include <asm/suspend.h> #include <mach/migor.h> #include <cpu/sh7722.h> @@ -390,17 +389,25 @@ static struct platform_device migor_ceu_device = { }, }; -struct spi_gpio_platform_data sdcard_cn9_platform_data = { - .sck = GPIO_PTD0, - .mosi = GPIO_PTD1, - .miso = GPIO_PTD2, - .num_chipselect = 1, +static struct resource sdhi_cn9_resources[] = { + [0] = { + .name = "SDHI", + .start = 0x04ce0000, + .end = 0x04ce01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 101, + .flags = IORESOURCE_IRQ, + }, }; -static struct platform_device sdcard_cn9_device = { - .name = "spi_gpio", - .dev = { - .platform_data = &sdcard_cn9_platform_data, +static struct platform_device sdhi_cn9_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi_cn9_resources), + .resource = sdhi_cn9_resources, + .archdata = { + .hwblk_id = HWBLK_SDHI, }, }; @@ -467,23 +474,24 @@ static struct platform_device *migor_devices[] __initdata = { &migor_ceu_device, &migor_nor_flash_device, &migor_nand_flash_device, - &sdcard_cn9_device, + &sdhi_cn9_device, &migor_camera[0], &migor_camera[1], }; -static struct spi_board_info migor_spi_devices[] = { - { - .modalias = "mmc_spi", - .max_speed_hz = 5000000, - .chip_select = 0, - .controller_data = (void *) GPIO_PTD5, - }, -}; +extern char migor_sdram_enter_start; +extern char migor_sdram_enter_end; +extern char migor_sdram_leave_start; +extern char migor_sdram_leave_end; static int __init migor_devices_setup(void) { - + /* register board specific self-refresh code */ + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + &migor_sdram_enter_start, + &migor_sdram_enter_end, + &migor_sdram_leave_start, + &migor_sdram_leave_end); #ifdef CONFIG_PM /* Let D11 LED show STATUS0 */ gpio_request(GPIO_FN_STATUS0, NULL); @@ -525,6 +533,16 @@ static int __init migor_devices_setup(void) gpio_request(GPIO_PTA1, NULL); gpio_direction_input(GPIO_PTA1); + /* SDHI */ + gpio_request(GPIO_FN_SDHICD, NULL); + gpio_request(GPIO_FN_SDHIWP, NULL); + gpio_request(GPIO_FN_SDHID3, NULL); + gpio_request(GPIO_FN_SDHID2, NULL); + gpio_request(GPIO_FN_SDHID1, NULL); + gpio_request(GPIO_FN_SDHID0, NULL); + gpio_request(GPIO_FN_SDHICMD, NULL); + gpio_request(GPIO_FN_SDHICLK, NULL); + /* Touch Panel */ gpio_request(GPIO_FN_IRQ6, NULL); @@ -612,9 +630,6 @@ static int __init migor_devices_setup(void) i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); - spi_register_board_info(migor_spi_devices, - ARRAY_SIZE(migor_spi_devices)); - return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices)); } arch_initcall(migor_devices_setup); diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c index c70fecedcac4..78d7b27c80da 100644 --- a/arch/sh/boards/mach-r2d/irq.c +++ b/arch/sh/boards/mach-r2d/irq.c @@ -116,7 +116,7 @@ static unsigned char irl2irq[R2D_NR_IRL]; int rts7751r2d_irq_demux(int irq) { - if (irq >= R2D_NR_IRL || !irl2irq[irq]) + if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq]) return irq; return irl2irq[irq]; diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index 02d21a3e2a8f..4eb31acfafef 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -16,15 +16,17 @@ #include <asm/io.h> #include <mach-se/mach/se7722.h> +unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, }; + static void disable_se7722_irq(unsigned int irq) { - unsigned int bit = irq - SE7722_FPGA_IRQ_BASE; + unsigned int bit = (unsigned int)get_irq_chip_data(irq); ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); } static void enable_se7722_irq(unsigned int irq) { - unsigned int bit = irq - SE7722_FPGA_IRQ_BASE; + unsigned int bit = (unsigned int)get_irq_chip_data(irq); ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); } @@ -38,18 +40,15 @@ static struct irq_chip se7722_irq_chip __read_mostly = { static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) { unsigned short intv = ctrl_inw(IRQ01_STS); - struct irq_desc *ext_desc; - unsigned int ext_irq = SE7722_FPGA_IRQ_BASE; + unsigned int ext_irq = 0; intv &= (1 << SE7722_FPGA_IRQ_NR) - 1; - while (intv) { - if (intv & 1) { - ext_desc = irq_desc + ext_irq; - handle_level_irq(ext_irq, ext_desc); - } - intv >>= 1; - ext_irq++; + for (; intv; intv >>= 1, ext_irq++) { + if (!(intv & 1)) + continue; + + generic_handle_irq(se7722_fpga_irq[ext_irq]); } } @@ -63,11 +62,18 @@ void __init init_se7722_IRQ(void) ctrl_outw(0, IRQ01_MASK); /* disable all irqs */ ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ - for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) - set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i, + for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { + se7722_fpga_irq[i] = create_irq(); + if (se7722_fpga_irq[i] < 0) + return; + + set_irq_chip_and_handler_name(se7722_fpga_irq[i], &se7722_irq_chip, handle_level_irq, "level"); + set_irq_chip_data(se7722_fpga_irq[i], (void *)i); + } + set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux); set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index 36374078e521..b1cb9425b600 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/input.h> +#include <linux/input/sh_keysc.h> #include <linux/smc91x.h> #include <mach-se/mach/se7722.h> #include <mach-se/mach/mrshpc.h> @@ -21,7 +22,6 @@ #include <asm/clock.h> #include <asm/io.h> #include <asm/heartbeat.h> -#include <asm/sh_keysc.h> #include <cpu/sh7722.h> /* Heartbeat */ @@ -60,8 +60,7 @@ static struct resource smc91x_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = SMC_IRQ, - .end = SMC_IRQ, + /* Filled in later */ .flags = IORESOURCE_IRQ, }, }; @@ -90,8 +89,7 @@ static struct resource cf_ide_resources[] = { .flags = IORESOURCE_IO, }, [2] = { - .start = MRSHPC_IRQ0, - .end = MRSHPC_IRQ0, + /* Filled in later */ .flags = IORESOURCE_IRQ, }, }; @@ -153,6 +151,14 @@ static struct platform_device *se7722_devices[] __initdata = { static int __init se7722_devices_setup(void) { mrshpc_setup_windows(); + + /* Wire-up dynamic vectors */ + cf_ide_resources[2].start = cf_ide_resources[2].end = + se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0]; + + smc91x_eth_resources[1].start = smc91x_eth_resources[1].end = + se7722_fpga_irq[SE7722_FPGA_IRQ_SMC]; + return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } device_initcall(se7722_devices_setup); @@ -193,6 +199,5 @@ static void __init se7722_setup(char **cmdline_p) static struct sh_machine_vector mv_se7722 __initmv = { .mv_name = "Solution Engine 7722" , .mv_setup = se7722_setup , - .mv_nr_irqs = SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR, .mv_init_irq = init_se7722_IRQ, }; diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile index 349cbd6ce82d..a08b36830f0e 100644 --- a/arch/sh/boards/mach-se/7724/Makefile +++ b/arch/sh/boards/mach-se/7724/Makefile @@ -7,4 +7,4 @@ # # -obj-y := setup.o irq.o
\ No newline at end of file +obj-y := setup.o irq.o sdram.o diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S new file mode 100644 index 000000000000..9040167d5022 --- /dev/null +++ b/arch/sh/boards/mach-se/7724/sdram.S @@ -0,0 +1,52 @@ +/* + * MS7724SE sdram self/auto-refresh setup code + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sys.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/suspend.h> +#include <asm/romimage-macros.h> + +/* code to enter and leave self-refresh. must be self-contained. + * this code will be copied to on-chip memory and executed from there. + */ + .balign 4 +ENTRY(ms7724se_sdram_enter_start) + + /* DBSC: put memory in self-refresh mode */ + + ED 0xFD000010, 0x00000000 /* DBEN */ + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000040, 0x00000001 /* DBRFPDN0 */ + + rts + nop + +ENTRY(ms7724se_sdram_enter_end) + + .balign 4 +ENTRY(ms7724se_sdram_leave_start) + + /* DBSC: put memory in auto-refresh mode */ + + ED 0xFD000040, 0x00000000 /* DBRFPDN0 */ + WAIT 1 + ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */ + ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */ + ED 0xFD000010, 0x00000001 /* DBEN */ + ED 0xFD000040, 0x00010000 /* DBRFPDN0 */ + + rts + nop + +ENTRY(ms7724se_sdram_leave_end) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 0894bba9fade..4b0f0c0dc2b8 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -19,6 +19,7 @@ #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> @@ -27,7 +28,7 @@ #include <asm/heartbeat.h> #include <asm/sh_eth.h> #include <asm/clock.h> -#include <asm/sh_keysc.h> +#include <asm/suspend.h> #include <cpu/sh7724.h> #include <mach-se/mach/se7724.h> @@ -451,6 +452,52 @@ static struct platform_device sh7724_usb1_gadget_device = { .resource = sh7724_usb1_gadget_resources, }; +static struct resource sdhi0_cn7_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0x04ce0000, + .end = 0x04ce01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 101, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_cn7_device = { + .name = "sh_mobile_sdhi", + .id = 0, + .num_resources = ARRAY_SIZE(sdhi0_cn7_resources), + .resource = sdhi0_cn7_resources, + .archdata = { + .hwblk_id = HWBLK_SDHI0, + }, +}; + +static struct resource sdhi1_cn8_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0x04cf0000, + .end = 0x04cf01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 24, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_cn8_device = { + .name = "sh_mobile_sdhi", + .id = 1, + .num_resources = ARRAY_SIZE(sdhi1_cn8_resources), + .resource = sdhi1_cn8_resources, + .archdata = { + .hwblk_id = HWBLK_SDHI1, + }, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -463,6 +510,8 @@ static struct platform_device *ms7724se_devices[] __initdata = { &sh7724_usb0_host_device, &sh7724_usb1_gadget_device, &fsi_device, + &sdhi0_cn7_device, + &sdhi1_cn8_device, }; #define EEPROM_OP 0xBA206000 @@ -487,7 +536,7 @@ static int __init sh_eth_is_eeprom_ready(void) static void __init sh_eth_init(void) { int i; - u16 mac[3]; + u16 mac; /* check EEPROM status */ if (!sh_eth_is_eeprom_ready()) @@ -501,16 +550,10 @@ static void __init sh_eth_init(void) if (!sh_eth_is_eeprom_ready()) return; - mac[i] = ctrl_inw(EEPROM_DATA); - mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */ + mac = ctrl_inw(EEPROM_DATA); + sh_eth_plat.mac_addr[i << 1] = mac & 0xff; + sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8; } - - /* reset sh-eth */ - ctrl_outl(0x1, SH_ETH_ADDR + 0x0); - - /* set MAC addr */ - ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR); - ctrl_outl((mac[2]), SH_ETH_MALR); } #define SW4140 0xBA201000 @@ -527,11 +570,22 @@ static void __init sh_eth_init(void) #define SW41_G 0x4000 #define SW41_H 0x8000 +extern char ms7724se_sdram_enter_start; +extern char ms7724se_sdram_enter_end; +extern char ms7724se_sdram_leave_start; +extern char ms7724se_sdram_leave_end; + static int __init devices_setup(void) { u16 sw = ctrl_inw(SW4140); /* select camera, monitor */ struct clk *fsia_clk; + /* register board specific self-refresh code */ + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + &ms7724se_sdram_enter_start, + &ms7724se_sdram_enter_end, + &ms7724se_sdram_leave_start, + &ms7724se_sdram_leave_end); /* Reset Release */ ctrl_outw(ctrl_inw(FPGA_OUT) & ~((1 << 1) | /* LAN */ @@ -701,6 +755,26 @@ static int __init devices_setup(void) clk_set_rate(&fsimcka_clk, 11000); clk_put(fsia_clk); + /* SDHI0 connected to cn7 */ + gpio_request(GPIO_FN_SDHI0CD, NULL); + gpio_request(GPIO_FN_SDHI0WP, NULL); + gpio_request(GPIO_FN_SDHI0D3, NULL); + gpio_request(GPIO_FN_SDHI0D2, NULL); + gpio_request(GPIO_FN_SDHI0D1, NULL); + gpio_request(GPIO_FN_SDHI0D0, NULL); + gpio_request(GPIO_FN_SDHI0CMD, NULL); + gpio_request(GPIO_FN_SDHI0CLK, NULL); + + /* SDHI1 connected to cn8 */ + gpio_request(GPIO_FN_SDHI1CD, NULL); + gpio_request(GPIO_FN_SDHI1WP, NULL); + gpio_request(GPIO_FN_SDHI1D3, NULL); + gpio_request(GPIO_FN_SDHI1D2, NULL); + gpio_request(GPIO_FN_SDHI1D1, NULL); + gpio_request(GPIO_FN_SDHI1D0, NULL); + gpio_request(GPIO_FN_SDHI1CMD, NULL); + gpio_request(GPIO_FN_SDHI1CLK, NULL); + /* * enable SH-Eth * diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c index fd56a71ca9d9..b51b1fc4baae 100644 --- a/arch/sh/boot/compressed/misc.c +++ b/arch/sh/boot/compressed/misc.c @@ -131,7 +131,7 @@ void decompress_kernel(void) #ifdef CONFIG_SUPERH64 output_addr = (CONFIG_MEMORY_START + 0x2000); #else - output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE); + output_addr = __pa((unsigned long)&_text+PAGE_SIZE); #ifdef CONFIG_29BIT output_addr |= P2SEG; #endif diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile index 5806eee84f6f..f473a24a2d92 100644 --- a/arch/sh/boot/romimage/Makefile +++ b/arch/sh/boot/romimage/Makefile @@ -4,16 +4,22 @@ # create an image suitable for burning to flash from zImage # -targets := vmlinux head.o +targets := vmlinux head.o zeropage.bin piggy.o OBJECTS = $(obj)/head.o -LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart +LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \ + -T $(obj)/../../kernel/vmlinux.lds $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE $(call if_changed,ld) @: +OBJCOPYFLAGS += -j .empty_zero_page + +$(obj)/zeropage.bin: vmlinux FORCE + $(call if_changed,objcopy) + LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T -$(obj)/piggy.o: $(obj)/vmlinux.scr arch/sh/boot/zImage FORCE +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/zeropage.bin arch/sh/boot/zImage FORCE $(call if_changed,ld) diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S index 219bc626dd71..93e779a405ec 100644 --- a/arch/sh/boot/romimage/head.S +++ b/arch/sh/boot/romimage/head.S @@ -5,6 +5,44 @@ */ .text + #include <asm/page.h> + .global romstart romstart: + /* include board specific setup code */ #include <mach/romimage.h> + + /* copy the empty_zero_page contents to where vmlinux expects it */ + mova empty_zero_page_src, r0 + mov.l empty_zero_page_dst, r1 + mov #(PAGE_SHIFT - 4), r4 + mov #1, r3 + shld r4, r3 /* r3 = PAGE_SIZE / 16 */ + +1: + mov.l @r0, r4 + mov.l @(4, r0), r5 + mov.l @(8, r0), r6 + mov.l @(12, r0), r7 + add #16,r0 + mov.l r4, @r1 + mov.l r5, @(4, r1) + mov.l r6, @(8, r1) + mov.l r7, @(12, r1) + dt r3 + add #16,r1 + bf 1b + + /* jump to the zImage entry point located after the zero page data */ + mov #PAGE_SHIFT, r4 + mov #1, r1 + shld r4, r1 + mova empty_zero_page_src, r0 + add r1, r0 + jmp @r0 + nop + + .align 2 +empty_zero_page_dst: + .long _text +empty_zero_page_src: diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c index 347ee11351ec..1ee631d3725e 100644 --- a/arch/sh/drivers/dma/dma-sysfs.c +++ b/arch/sh/drivers/dma/dma-sysfs.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/sysdev.h> #include <linux/platform_device.h> -#include <linux/module.h> #include <linux/err.h> #include <linux/string.h> #include <asm/dma.h> @@ -21,7 +20,6 @@ static struct sysdev_class dma_sysclass = { .name = "dma", }; -EXPORT_SYMBOL(dma_sysclass); static ssize_t dma_show_devices(struct sys_device *dev, struct sysdev_attribute *attr, char *buf) diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig deleted file mode 100644 index e8db585a6638..000000000000 --- a/arch/sh/drivers/pci/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -config PCI - bool "PCI support" - depends on SYS_SUPPORTS_PCI - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you have PCI, say Y, otherwise N. - -config SH_PCIDMA_NONCOHERENT - bool "Cache and PCI noncoherent" - depends on PCI - default y - help - Enable this option if your platform does not have a CPU cache which - remains coherent with PCI DMA. It is safest to say 'Y', although you - will see better performance if you can say 'N', because the PCI DMA - code will not have to flush the CPU's caches. If you have a PCI host - bridge integrated with your SH CPU, refer carefully to the chip specs - to see if you can say 'N' here. Otherwise, leave it as 'Y'. diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h index 80d40813e057..99d6b3ecbe22 100644 --- a/arch/sh/include/asm/addrspace.h +++ b/arch/sh/include/asm/addrspace.h @@ -28,9 +28,6 @@ /* Returns the privileged segment base of a given address */ #define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) -/* Returns the physical address of a PnSEG (n=1,2) address */ -#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) - #if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED) /* * Map an address to a certain privileged segment @@ -60,5 +57,11 @@ #define P3_ADDR_MAX P4SEG #endif +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PMB +extern int __in_29bit_mode(void); +#endif /* CONFIG_PMB */ +#endif /* __ASSEMBLY__ */ + #endif /* __KERNEL__ */ #endif /* __ASM_SH_ADDRSPACE_H */ diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h index e8e78137c6f5..b16388d71954 100644 --- a/arch/sh/include/asm/atomic.h +++ b/arch/sh/include/asm/atomic.h @@ -78,11 +78,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -/* Atomic operations are already serializing on SH */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() #include <asm-generic/atomic-long.h> #include <asm-generic/atomic64.h> diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h index ebe595b7ab1f..98511e4d28cb 100644 --- a/arch/sh/include/asm/bitops.h +++ b/arch/sh/include/asm/bitops.h @@ -26,8 +26,8 @@ /* * clear_bit() doesn't provide any barrier for the compiler. */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() #ifdef CONFIG_SUPERH32 static inline unsigned long ffz(unsigned long word) diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h index 46260fcbdf4b..02a19a1c033a 100644 --- a/arch/sh/include/asm/bugs.h +++ b/arch/sh/include/asm/bugs.h @@ -14,11 +14,15 @@ #include <asm/processor.h> +extern void select_idle_routine(void); + static void __init check_bugs(void) { extern unsigned long loops_per_jiffy; char *p = &init_utsname()->machine[2]; /* "sh" */ + select_idle_routine(); + current_cpu_data.loops_per_jiffy = loops_per_jiffy; switch (current_cpu_data.family) { diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h index 69d56dd4c968..87ced133a363 100644 --- a/arch/sh/include/asm/dma-mapping.h +++ b/arch/sh/include/asm/dma-mapping.h @@ -1,219 +1,108 @@ #ifndef __ASM_SH_DMA_MAPPING_H #define __ASM_SH_DMA_MAPPING_H -#include <linux/mm.h> -#include <linux/scatterlist.h> -#include <linux/dma-debug.h> -#include <asm/cacheflush.h> -#include <asm/io.h> +extern struct dma_map_ops *dma_ops; +extern void no_iommu_init(void); + +static inline struct dma_map_ops *get_dma_ops(struct device *dev) +{ + return dma_ops; +} + #include <asm-generic/dma-coherent.h> +#include <asm-generic/dma-mapping-common.h> + +static inline int dma_supported(struct device *dev, u64 mask) +{ + struct dma_map_ops *ops = get_dma_ops(dev); -extern struct bus_type pci_bus_type; + if (ops->dma_supported) + return ops->dma_supported(dev, mask); -#define dma_supported(dev, mask) (1) + return 1; +} static inline int dma_set_mask(struct device *dev, u64 mask) { + struct dma_map_ops *ops = get_dma_ops(dev); + if (!dev->dma_mask || !dma_supported(dev, mask)) return -EIO; + if (ops->set_dma_mask) + return ops->set_dma_mask(dev, mask); *dev->dma_mask = mask; return 0; } -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction dir); #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#define dma_is_consistent(d, h) (1) - -static inline dma_addr_t dma_map_single(struct device *dev, - void *ptr, size_t size, - enum dma_data_direction dir) -{ - dma_addr_t addr = virt_to_phys(ptr); - -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return addr; -#endif - dma_cache_sync(dev, ptr, size, dir); - - debug_dma_map_page(dev, virt_to_page(ptr), - (unsigned long)ptr & ~PAGE_MASK, size, - dir, addr, true); - - return addr; -} - -static inline void dma_unmap_single(struct device *dev, dma_addr_t addr, - size_t size, enum dma_data_direction dir) -{ - debug_dma_unmap_page(dev, addr, size, dir, true); -} -static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++) { -#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); +#ifdef CONFIG_DMA_COHERENT +#define dma_is_consistent(d, h) (1) +#else +#define dma_is_consistent(d, h) (0) #endif - sg[i].dma_address = sg_phys(&sg[i]); - sg[i].dma_length = sg[i].length; - } - debug_dma_map_sg(dev, sg, nents, i, dir); - - return nents; -} - -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir) -{ - debug_dma_unmap_sg(dev, sg, nents, dir); -} - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ - return dma_map_single(dev, page_address(page) + offset, size, dir); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction dir) -{ - dma_unmap_single(dev, dma_address, size, dir); -} - -static inline void __dma_sync_single(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir) +static inline int dma_get_cache_alignment(void) { -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return; -#endif - dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir); + /* + * Each processor family will define its own L1_CACHE_SHIFT, + * L1_CACHE_BYTES wraps to this, so this is always safe. + */ + return L1_CACHE_BYTES; } -static inline void dma_sync_single_range(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction dir) +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return; -#endif - dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir); -} + struct dma_map_ops *ops = get_dma_ops(dev); -static inline void __dma_sync_sg(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction dir) -{ - int i; + if (ops->mapping_error) + return ops->mapping_error(dev, dma_addr); - for (i = 0; i < nelems; i++) { -#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); -#endif - sg[i].dma_address = sg_phys(&sg[i]); - sg[i].dma_length = sg[i].length; - } + return dma_addr == 0; } -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp) { - __dma_sync_single(dev, dma_handle, size, dir); - debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir); -} + struct dma_map_ops *ops = get_dma_ops(dev); + void *memory; -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, - size_t size, - enum dma_data_direction dir) -{ - __dma_sync_single(dev, dma_handle, size, dir); - debug_dma_sync_single_for_device(dev, dma_handle, size, dir); -} + if (dma_alloc_from_coherent(dev, size, dma_handle, &memory)) + return memory; + if (!ops->alloc_coherent) + return NULL; -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, - size_t size, - enum dma_data_direction direction) -{ - dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); - debug_dma_sync_single_range_for_cpu(dev, dma_handle, - offset, size, direction); -} + memory = ops->alloc_coherent(dev, size, dma_handle, gfp); + debug_dma_alloc_coherent(dev, size, *dma_handle, memory); -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, - size_t size, - enum dma_data_direction direction) -{ - dma_sync_single_for_device(dev, dma_handle+offset, size, direction); - debug_dma_sync_single_range_for_device(dev, dma_handle, - offset, size, direction); + return memory; } - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) +static inline void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) { - __dma_sync_sg(dev, sg, nelems, dir); - debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir); -} + struct dma_map_ops *ops = get_dma_ops(dev); -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - __dma_sync_sg(dev, sg, nelems, dir); - debug_dma_sync_sg_for_device(dev, sg, nelems, dir); -} + WARN_ON(irqs_disabled()); /* for portability */ -static inline int dma_get_cache_alignment(void) -{ - /* - * Each processor family will define its own L1_CACHE_SHIFT, - * L1_CACHE_BYTES wraps to this, so this is always safe. - */ - return L1_CACHE_BYTES; -} + if (dma_release_from_coherent(dev, get_order(size), vaddr)) + return; -static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ - return dma_addr == 0; + debug_dma_free_coherent(dev, size, vaddr, dma_handle); + if (ops->free_coherent) + ops->free_coherent(dev, size, vaddr, dma_handle); } -#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY - -extern int -dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags); - -extern void -dma_release_declared_memory(struct device *dev); - -extern void * -dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size); +/* arch/sh/mm/consistent.c */ +extern void *dma_generic_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_addr, gfp_t flag); +extern void dma_generic_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); #endif /* __ASM_SH_DMA_MAPPING_H */ diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h index ced6795891a6..bdccbbfdc0bd 100644 --- a/arch/sh/include/asm/dwarf.h +++ b/arch/sh/include/asm/dwarf.h @@ -194,6 +194,12 @@ #define DWARF_ARCH_RA_REG 17 #ifndef __ASSEMBLY__ + +#include <linux/compiler.h> +#include <linux/bug.h> +#include <linux/list.h> +#include <linux/module.h> + /* * Read either the frame pointer (r14) or the stack pointer (r15). * NOTE: this MUST be inlined. @@ -241,6 +247,12 @@ struct dwarf_cie { unsigned long flags; #define DWARF_CIE_Z_AUGMENTATION (1 << 0) + + /* + * 'mod' will be non-NULL if this CIE came from a module's + * .eh_frame section. + */ + struct module *mod; }; /** @@ -255,6 +267,12 @@ struct dwarf_fde { unsigned char *instructions; unsigned char *end; struct list_head link; + + /* + * 'mod' will be non-NULL if this FDE came from a module's + * .eh_frame section. + */ + struct module *mod; }; /** @@ -364,6 +382,12 @@ static inline unsigned int DW_CFA_operand(unsigned long insn) extern struct dwarf_frame *dwarf_unwind_stack(unsigned long, struct dwarf_frame *); +extern void dwarf_free_frame(struct dwarf_frame *); + +extern int module_dwarf_finalize(const Elf_Ehdr *, const Elf_Shdr *, + struct module *); +extern void module_dwarf_cleanup(struct module *); + #endif /* !__ASSEMBLY__ */ #define CFI_STARTPROC .cfi_startproc @@ -391,6 +415,10 @@ extern struct dwarf_frame *dwarf_unwind_stack(unsigned long, static inline void dwarf_unwinder_init(void) { } + +#define module_dwarf_finalize(hdr, sechdrs, me) (0) +#define module_dwarf_cleanup(mod) do { } while (0) + #endif #endif /* CONFIG_DWARF_UNWINDER */ diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h index 721fcc4d5e98..5ac1e40a511c 100644 --- a/arch/sh/include/asm/fixmap.h +++ b/arch/sh/include/asm/fixmap.h @@ -14,9 +14,9 @@ #define _ASM_FIXMAP_H #include <linux/kernel.h> +#include <linux/threads.h> #include <asm/page.h> #ifdef CONFIG_HIGHMEM -#include <linux/threads.h> #include <asm/kmap_types.h> #endif @@ -46,9 +46,15 @@ * fix-mapped? */ enum fixed_addresses { -#define FIX_N_COLOURS 16 + /* + * The FIX_CMAP entries are used by kmap_coherent() to get virtual + * addresses which are of a known color, and so their values are + * important. __fix_to_virt(FIX_CMAP_END - n) must give an address + * which is the same color as a page (n<<PAGE_SHIFT). + */ +#define FIX_N_COLOURS 8 FIX_CMAP_BEGIN, - FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, + FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1, FIX_UNCACHED, #ifdef CONFIG_HIGHMEM FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h index 1d3aee04b5cc..fb6bbb9b1cc8 100644 --- a/arch/sh/include/asm/fpu.h +++ b/arch/sh/include/asm/fpu.h @@ -18,16 +18,15 @@ static inline void grab_fpu(struct pt_regs *regs) struct task_struct; -extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); +extern void save_fpu(struct task_struct *__tsk); +void fpu_state_restore(struct pt_regs *regs); #else +#define save_fpu(tsk) do { } while (0) #define release_fpu(regs) do { } while (0) #define grab_fpu(regs) do { } while (0) +#define fpu_state_restore(regs) do { } while (0) -static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs) -{ - clear_tsk_thread_flag(tsk, TIF_USEDFPU); -} #endif struct user_regset; @@ -39,19 +38,28 @@ extern int fpregs_get(struct task_struct *target, unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf); +static inline void __unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + if (task_thread_info(tsk)->status & TS_USEDFPU) { + task_thread_info(tsk)->status &= ~TS_USEDFPU; + save_fpu(tsk); + release_fpu(regs); + } else + tsk->fpu_counter = 0; +} + static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs) { preempt_disable(); - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) - save_fpu(tsk, regs); + __unlazy_fpu(tsk, regs); preempt_enable(); } static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs) { preempt_disable(); - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { - clear_tsk_thread_flag(tsk, TIF_USEDFPU); + if (task_thread_info(tsk)->status & TS_USEDFPU) { + task_thread_info(tsk)->status &= ~TS_USEDFPU; release_fpu(regs); } preempt_enable(); diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h index 12f3a31f20af..13e9966464c2 100644 --- a/arch/sh/include/asm/ftrace.h +++ b/arch/sh/include/asm/ftrace.h @@ -35,4 +35,21 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) #endif /* __ASSEMBLY__ */ #endif /* CONFIG_FUNCTION_TRACER */ +#ifndef __ASSEMBLY__ + +/* arch/sh/kernel/return_address.c */ +extern void *return_address(unsigned int); + +#define HAVE_ARCH_CALLER_ADDR + +#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) +#define CALLER_ADDR1 ((unsigned long)return_address(1)) +#define CALLER_ADDR2 ((unsigned long)return_address(2)) +#define CALLER_ADDR3 ((unsigned long)return_address(3)) +#define CALLER_ADDR4 ((unsigned long)return_address(4)) +#define CALLER_ADDR5 ((unsigned long)return_address(5)) +#define CALLER_ADDR6 ((unsigned long)return_address(6)) + +#endif /* __ASSEMBLY__ */ + #endif /* __ASM_SH_FTRACE_H */ diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h index 61f93da2c62e..f8d9a731e903 100644 --- a/arch/sh/include/asm/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -20,7 +20,7 @@ #endif #define ARCH_NR_GPIOS 512 -#include <asm-generic/gpio.h> +#include <linux/sh_pfc.h> #ifdef CONFIG_GPIOLIB @@ -53,84 +53,4 @@ static inline int irq_to_gpio(unsigned int irq) #endif /* CONFIG_GPIOLIB */ -typedef unsigned short pinmux_enum_t; -typedef unsigned short pinmux_flag_t; - -#define PINMUX_TYPE_NONE 0 -#define PINMUX_TYPE_FUNCTION 1 -#define PINMUX_TYPE_GPIO 2 -#define PINMUX_TYPE_OUTPUT 3 -#define PINMUX_TYPE_INPUT 4 -#define PINMUX_TYPE_INPUT_PULLUP 5 -#define PINMUX_TYPE_INPUT_PULLDOWN 6 - -#define PINMUX_FLAG_TYPE (0x7) -#define PINMUX_FLAG_WANT_PULLUP (1 << 3) -#define PINMUX_FLAG_WANT_PULLDOWN (1 << 4) - -#define PINMUX_FLAG_DBIT_SHIFT 5 -#define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT) -#define PINMUX_FLAG_DREG_SHIFT 10 -#define PINMUX_FLAG_DREG (0x3f << PINMUX_FLAG_DREG_SHIFT) - -struct pinmux_gpio { - pinmux_enum_t enum_id; - pinmux_flag_t flags; -}; - -#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark } -#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0 - -struct pinmux_cfg_reg { - unsigned long reg, reg_width, field_width; - unsigned long *cnt; - pinmux_enum_t *enum_ids; -}; - -#define PINMUX_CFG_REG(name, r, r_width, f_width) \ - .reg = r, .reg_width = r_width, .field_width = f_width, \ - .cnt = (unsigned long [r_width / f_width]) {}, \ - .enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \ - -struct pinmux_data_reg { - unsigned long reg, reg_width, reg_shadow; - pinmux_enum_t *enum_ids; -}; - -#define PINMUX_DATA_REG(name, r, r_width) \ - .reg = r, .reg_width = r_width, \ - .enum_ids = (pinmux_enum_t [r_width]) \ - -struct pinmux_range { - pinmux_enum_t begin; - pinmux_enum_t end; - pinmux_enum_t force; -}; - -struct pinmux_info { - char *name; - pinmux_enum_t reserved_id; - struct pinmux_range data; - struct pinmux_range input; - struct pinmux_range input_pd; - struct pinmux_range input_pu; - struct pinmux_range output; - struct pinmux_range mark; - struct pinmux_range function; - - unsigned first_gpio, last_gpio; - - struct pinmux_gpio *gpios; - struct pinmux_cfg_reg *cfg_regs; - struct pinmux_data_reg *data_regs; - - pinmux_enum_t *gpio_data; - unsigned int gpio_data_size; - - unsigned long *gpio_in_use; - struct gpio_chip chip; -}; - -int register_pinmux(struct pinmux_info *pip); - #endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h index a5be4afa790b..48b191313a99 100644 --- a/arch/sh/include/asm/hardirq.h +++ b/arch/sh/include/asm/hardirq.h @@ -1,9 +1,16 @@ #ifndef __ASM_SH_HARDIRQ_H #define __ASM_SH_HARDIRQ_H -extern void ack_bad_irq(unsigned int irq); -#define ack_bad_irq ack_bad_irq +#include <linux/threads.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; + unsigned int __nmi_count; /* arch dependent */ +} ____cacheline_aligned irq_cpustat_t; -#include <asm-generic/hardirq.h> +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(unsigned int irq); #endif /* __ASM_SH_HARDIRQ_H */ diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 5be45ea4dfec..512cd3e9d0ca 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -90,15 +90,11 @@ #define ctrl_outl __raw_writel #define ctrl_outq __raw_writeq +extern unsigned long generic_io_base; + static inline void ctrl_delay(void) { -#ifdef CONFIG_CPU_SH4 - __raw_readw(CCN_PVR); -#elif defined(P2SEG) - __raw_readw(P2SEG); -#else -#error "Need a dummy address for delay" -#endif + __raw_readw(generic_io_base); } #define __BUILD_MEMORY_STRING(bwlq, type) \ @@ -186,8 +182,6 @@ __BUILD_MEMORY_STRING(q, u64) #define IO_SPACE_LIMIT 0xffffffff -extern unsigned long generic_io_base; - /* * This function provides a method for the generic case where a * board-specific ioport_map simply needs to return the port + some @@ -246,7 +240,7 @@ void __iounmap(void __iomem *addr); static inline void __iomem * __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) { -#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) +#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB) unsigned long last_addr = offset + size - 1; #endif void __iomem *ret; @@ -255,7 +249,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) if (ret) return ret; -#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) +#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB) /* * For P1 and P2 space this is trivial, as everything is already * mapped. Uncached access for P1 addresses are done through P2. diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h index 46e71da5be6b..a741153b41c2 100644 --- a/arch/sh/include/asm/irqflags.h +++ b/arch/sh/include/asm/irqflags.h @@ -1,34 +1,9 @@ #ifndef __ASM_SH_IRQFLAGS_H #define __ASM_SH_IRQFLAGS_H -#ifdef CONFIG_SUPERH32 -#include "irqflags_32.h" -#else -#include "irqflags_64.h" -#endif +#define RAW_IRQ_DISABLED 0xf0 +#define RAW_IRQ_ENABLED 0x00 -#define raw_local_save_flags(flags) \ - do { (flags) = __raw_local_save_flags(); } while (0) - -static inline int raw_irqs_disabled_flags(unsigned long flags) -{ - return (flags != 0); -} - -static inline int raw_irqs_disabled(void) -{ - unsigned long flags = __raw_local_save_flags(); - - return raw_irqs_disabled_flags(flags); -} - -#define raw_local_irq_save(flags) \ - do { (flags) = __raw_local_irq_save(); } while (0) - -static inline void raw_local_irq_restore(unsigned long flags) -{ - if ((flags & 0xf0) != 0xf0) - raw_local_irq_enable(); -} +#include <asm-generic/irqflags.h> #endif /* __ASM_SH_IRQFLAGS_H */ diff --git a/arch/sh/include/asm/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h deleted file mode 100644 index 60218f541340..000000000000 --- a/arch/sh/include/asm/irqflags_32.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __ASM_SH_IRQFLAGS_32_H -#define __ASM_SH_IRQFLAGS_32_H - -static inline void raw_local_irq_enable(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %1, %0\n\t" -#ifdef CONFIG_CPU_HAS_SR_RB - "stc r6_bank, %1\n\t" - "or %1, %0\n\t" -#endif - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x000000f0) - : "memory" - ); -} - -static inline void raw_local_irq_disable(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - : "=&z" (flags) - : /* no inputs */ - : "memory" - ); -} - -static inline void set_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "or %2, %0\n\t" - "and %3, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "r" (0x10000000), "r" (0xffffff0f) - : "memory" - ); -} - -static inline void clear_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %2, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x10000000) - : "memory" - ); -} - -static inline unsigned long __raw_local_save_flags(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and #0xf0, %0\n\t" - : "=&z" (flags) - : /* no inputs */ - : "memory" - ); - - return flags; -} - -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long flags, __dummy; - - __asm__ __volatile__ ( - "stc sr, %1\n\t" - "mov %1, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - "mov %1, %0\n\t" - "and #0xf0, %0\n\t" - : "=&z" (flags), "=&r" (__dummy) - : /* no inputs */ - : "memory" - ); - - return flags; -} - -#endif /* __ASM_SH_IRQFLAGS_32_H */ diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h deleted file mode 100644 index 88f65222c1d4..000000000000 --- a/arch/sh/include/asm/irqflags_64.h +++ /dev/null @@ -1,85 +0,0 @@ -#ifndef __ASM_SH_IRQFLAGS_64_H -#define __ASM_SH_IRQFLAGS_64_H - -#include <cpu/registers.h> - -#define SR_MASK_LL 0x00000000000000f0LL -#define SR_BL_LL 0x0000000010000000LL - -static inline void raw_local_irq_enable(void) -{ - unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline void raw_local_irq_disable(void) -{ - unsigned long long __dummy0, __dummy1 = SR_MASK_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline void set_bl_bit(void) -{ - unsigned long long __dummy0, __dummy1 = SR_BL_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); - -} - -static inline void clear_bl_bit(void) -{ - unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static inline unsigned long __raw_local_save_flags(void) -{ - unsigned long long __dummy = SR_MASK_LL; - unsigned long flags; - - __asm__ __volatile__ ( - "getcon " __SR ", %0\n\t" - "and %0, %1, %0" - : "=&r" (flags) - : "r" (__dummy)); - - return flags; -} - -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long long __dummy0, __dummy1 = SR_MASK_LL; - unsigned long flags; - - __asm__ __volatile__ ( - "getcon " __SR ", %1\n\t" - "or %1, r63, %0\n\t" - "or %1, %2, %1\n\t" - "putcon %1, " __SR "\n\t" - "and %0, %2, %0" - : "=&r" (flags), "=&r" (__dummy0) - : "r" (__dummy1)); - - return flags; -} - -#endif /* __ASM_SH_IRQFLAGS_64_H */ diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h index f5963037c9d6..c7426ad9926e 100644 --- a/arch/sh/include/asm/mmu.h +++ b/arch/sh/include/asm/mmu.h @@ -7,12 +7,16 @@ #define PMB_PASCR 0xff000070 #define PMB_IRMCR 0xff000078 +#define PASCR_SE 0x80000000 + #define PMB_ADDR 0xf6100000 #define PMB_DATA 0xf7100000 #define PMB_ENTRY_MAX 16 #define PMB_E_MASK 0x0000000f #define PMB_E_SHIFT 8 +#define PMB_PFN_MASK 0xff000000 + #define PMB_SZ_16M 0x00000000 #define PMB_SZ_64M 0x00000010 #define PMB_SZ_128M 0x00000080 @@ -62,17 +66,10 @@ struct pmb_entry { }; /* arch/sh/mm/pmb.c */ -int __set_pmb_entry(unsigned long vpn, unsigned long ppn, - unsigned long flags, int *entry); -int set_pmb_entry(struct pmb_entry *pmbe); -void clear_pmb_entry(struct pmb_entry *pmbe); -struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, - unsigned long flags); -void pmb_free(struct pmb_entry *pmbe); long pmb_remap(unsigned long virt, unsigned long phys, unsigned long size, unsigned long flags); void pmb_unmap(unsigned long addr); +int pmb_init(void); #endif /* __ASSEMBLY__ */ #endif /* __MMU_H */ - diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 4163950cd1c6..67f3999b544e 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -3,8 +3,6 @@ #ifdef __KERNEL__ -#include <linux/dma-mapping.h> - /* Can be used to override the logic in pci_scan_bus for skipping already-configured bus numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the loader */ @@ -54,30 +52,18 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) * address space. The networking and block device layers use * this boolean for bounce buffer decisions. */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#include <linux/types.h> -#include <linux/slab.h> -#include <asm/scatterlist.h> -#include <linux/string.h> -#include <asm/io.h> +#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) /* pci_unmap_{single,page} being a nop depends upon the * configuration. */ -#ifdef CONFIG_SH_PCIDMA_NONCOHERENT -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) +#ifdef CONFIG_DMA_NONCOHERENT +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) #else #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) diff --git a/arch/sh/include/asm/perf_event.h b/arch/sh/include/asm/perf_event.h index 11a302297ab7..3d0c9f36d150 100644 --- a/arch/sh/include/asm/perf_event.h +++ b/arch/sh/include/asm/perf_event.h @@ -1,8 +1,35 @@ #ifndef __ASM_SH_PERF_EVENT_H #define __ASM_SH_PERF_EVENT_H -/* SH only supports software events through this interface. */ -static inline void set_perf_event_pending(void) {} +struct hw_perf_event; + +#define MAX_HWEVENTS 2 + +struct sh_pmu { + const char *name; + unsigned int num_events; + void (*disable_all)(void); + void (*enable_all)(void); + void (*enable)(struct hw_perf_event *, int); + void (*disable)(struct hw_perf_event *, int); + u64 (*read)(int); + int (*event_map)(int); + unsigned int max_events; + unsigned long raw_event_mask; + const int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; +}; + +/* arch/sh/kernel/perf_event.c */ +extern int register_sh_pmu(struct sh_pmu *); +extern int reserve_pmc_hardware(void); +extern void release_pmc_hardware(void); + +static inline void set_perf_event_pending(void) +{ + /* Nothing to see here, move along. */ +} #define PERF_EVENT_INDEX_OFFSET 0 diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index 4f3efa7d5a64..ba3046e4f06f 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -75,13 +75,31 @@ static inline unsigned long long neff_sign_extend(unsigned long val) #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 -#ifdef CONFIG_32BIT -#define PHYS_ADDR_MASK 0xffffffff +#define PHYS_ADDR_MASK29 0x1fffffff +#define PHYS_ADDR_MASK32 0xffffffff + +#ifdef CONFIG_PMB +static inline unsigned long phys_addr_mask(void) +{ + /* Is the MMU in 29bit mode? */ + if (__in_29bit_mode()) + return PHYS_ADDR_MASK29; + + return PHYS_ADDR_MASK32; +} +#elif defined(CONFIG_32BIT) +static inline unsigned long phys_addr_mask(void) +{ + return PHYS_ADDR_MASK32; +} #else -#define PHYS_ADDR_MASK 0x1fffffff +static inline unsigned long phys_addr_mask(void) +{ + return PHYS_ADDR_MASK29; +} #endif -#define PTE_PHYS_MASK (PHYS_ADDR_MASK & PAGE_MASK) +#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK) #define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT) #ifdef CONFIG_SUPERH32 diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h index c0d359ce337b..b35435516203 100644 --- a/arch/sh/include/asm/pgtable_32.h +++ b/arch/sh/include/asm/pgtable_32.h @@ -108,7 +108,7 @@ static inline unsigned long copy_ptea_attributes(unsigned long x) #define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) #endif -#define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) +#define _PAGE_FLAGS_HARDWARE_MASK (phys_addr_mask() & ~(_PAGE_CLEAR_FLAGS)) /* Hardware flags, page size encoding */ #if !defined(CONFIG_MMU) diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h index 9a8714945dc9..1f3d6fab660c 100644 --- a/arch/sh/include/asm/processor_32.h +++ b/arch/sh/include/asm/processor_32.h @@ -56,6 +56,7 @@ asmlinkage void __init sh_cpu_init(void); #define SR_DSP 0x00001000 #define SR_IMASK 0x000000f0 #define SR_FD 0x00008000 +#define SR_MD 0x40000000 /* * DSP structure and data @@ -136,7 +137,7 @@ struct mm_struct; extern void release_thread(struct task_struct *); /* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) +void prepare_to_copy(struct task_struct *tsk); /* * create a kernel thread without removing it from tasklists diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h index 327cc2e4c97b..e38d1d4c7f6f 100644 --- a/arch/sh/include/asm/scatterlist.h +++ b/arch/sh/include/asm/scatterlist.h @@ -1,7 +1,7 @@ #ifndef __ASM_SH_SCATTERLIST_H #define __ASM_SH_SCATTERLIST_H -#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK +#define ISA_DMA_THRESHOLD phys_addr_mask() #include <asm-generic/scatterlist.h> diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h deleted file mode 100644 index 4a65b1e40eab..000000000000 --- a/arch/sh/include/asm/sh_keysc.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __ASM_KEYSC_H__ -#define __ASM_KEYSC_H__ - -#define SH_KEYSC_MAXKEYS 30 - -struct sh_keysc_info { - enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode; - int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */ - int delay; - int kycr2_delay; - int keycodes[SH_KEYSC_MAXKEYS]; -}; - -#endif /* __ASM_KEYSC_H__ */ diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h index 5c8ea28ff7a4..fe9c2a1ad047 100644 --- a/arch/sh/include/asm/suspend.h +++ b/arch/sh/include/asm/suspend.h @@ -2,6 +2,7 @@ #define _ASM_SH_SUSPEND_H #ifndef __ASSEMBLY__ +#include <linux/notifier.h> static inline int arch_prepare_suspend(void) { return 0; } #include <asm/ptrace.h> @@ -19,6 +20,69 @@ void sh_mobile_setup_cpuidle(void); static inline void sh_mobile_setup_cpuidle(void) {} #endif +/* notifier chains for pre/post sleep hooks */ +extern struct atomic_notifier_head sh_mobile_pre_sleep_notifier_list; +extern struct atomic_notifier_head sh_mobile_post_sleep_notifier_list; + +/* priority levels for notifiers */ +#define SH_MOBILE_SLEEP_BOARD 0 +#define SH_MOBILE_SLEEP_CPU 1 +#define SH_MOBILE_PRE(x) (x) +#define SH_MOBILE_POST(x) (-(x)) + +/* board code registration function for self-refresh assembly snippets */ +void sh_mobile_register_self_refresh(unsigned long flags, + void *pre_start, void *pre_end, + void *post_start, void *post_end); + +/* register structure for address/data information */ +struct sh_sleep_regs { + unsigned long stbcr; + unsigned long bar; + + /* MMU */ + unsigned long pteh; + unsigned long ptel; + unsigned long ttb; + unsigned long tea; + unsigned long mmucr; + unsigned long ptea; + unsigned long pascr; + unsigned long irmcr; + + /* Cache */ + unsigned long ccr; + unsigned long ramcr; +}; + +/* data area for low-level sleep code */ +struct sh_sleep_data { + /* current sleep mode (SUSP_SH_...) */ + unsigned long mode; + + /* addresses of board specific self-refresh snippets */ + unsigned long sf_pre; + unsigned long sf_post; + + /* address of resume code */ + unsigned long resume; + + /* register state saved and restored by the assembly code */ + unsigned long vbr; + unsigned long spc; + unsigned long sr; + unsigned long sp; + + /* structure for keeping register addresses */ + struct sh_sleep_regs addr; + + /* structure for saving/restoring register state */ + struct sh_sleep_regs data; +}; + +/* a bitmap of supported sleep modes (SUSP_SH..) */ +extern unsigned long sh_mobile_sleep_supported; + #endif /* flags passed to assembly suspend code */ @@ -27,5 +91,6 @@ static inline void sh_mobile_setup_cpuidle(void) {} #define SUSP_SH_RSTANDBY (1 << 2) /* SH-Mobile R-standby mode */ #define SUSP_SH_USTANDBY (1 << 3) /* SH-Mobile U-standby mode */ #define SUSP_SH_SF (1 << 4) /* Enable self-refresh */ +#define SUSP_SH_MMU (1 << 5) /* Save/restore MMU and cache */ #endif /* _ASM_SH_SUSPEND_H */ diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h index b5c5acdc8c0e..c15415b4b169 100644 --- a/arch/sh/include/asm/system.h +++ b/arch/sh/include/asm/system.h @@ -171,10 +171,6 @@ BUILD_TRAP_HANDLER(fpu_error); BUILD_TRAP_HANDLER(fpu_state_restore); BUILD_TRAP_HANDLER(nmi); -#ifdef CONFIG_BUG -extern void handle_BUG(struct pt_regs *); -#endif - #define arch_align_stack(x) (x) struct mem_access { diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h index 607d413f6168..06814f5b59c7 100644 --- a/arch/sh/include/asm/system_32.h +++ b/arch/sh/include/asm/system_32.h @@ -232,4 +232,33 @@ asmlinkage void do_exception_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs __regs); +static inline void set_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or %2, %0\n\t" + "and %3, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "r" (0x10000000), "r" (0xffffff0f) + : "memory" + ); +} + +static inline void clear_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %2, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x10000000) + : "memory" + ); +} + #endif /* __ASM_SH_SYSTEM_32_H */ diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h index 8e4a03e7966c..ab1dd917ea87 100644 --- a/arch/sh/include/asm/system_64.h +++ b/arch/sh/include/asm/system_64.h @@ -12,6 +12,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#include <cpu/registers.h> #include <asm/processor.h> /* @@ -47,4 +48,29 @@ static inline reg_size_t register_align(void *val) return (unsigned long long)(signed long long)(signed long)val; } +#define SR_BL_LL 0x0000000010000000LL + +static inline void set_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); + +} + +static inline void clear_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + #endif /* __ASM_SH_SYSTEM_64_H */ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index bdeb9d46d17d..1f3d927e2265 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -19,6 +19,7 @@ struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ unsigned long flags; /* low level flags */ + __u32 status; /* thread synchronous flags */ __u32 cpu; int preempt_count; /* 0 => preemptable, <0 => BUG */ mm_segment_t addr_limit; /* thread address space */ @@ -50,6 +51,7 @@ struct thread_info { .task = &tsk, \ .exec_domain = &default_exec_domain, \ .flags = 0, \ + .status = 0, \ .cpu = 0, \ .preempt_count = INIT_PREEMPT_COUNT, \ .addr_limit = KERNEL_DS, \ @@ -111,13 +113,11 @@ extern void free_thread_info(struct thread_info *ti); #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ #define TIF_SIGPENDING 1 /* signal pending */ #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ #define TIF_SINGLESTEP 4 /* singlestepping active */ #define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ #define TIF_SECCOMP 6 /* secure computing */ #define TIF_NOTIFY_RESUME 7 /* callback before returning to user */ #define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */ -#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 #define TIF_FREEZE 19 /* Freezing for suspend */ @@ -125,13 +125,11 @@ extern void free_thread_info(struct thread_info *ti); #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) -#define _TIF_USEDFPU (1 << TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_FREEZE (1 << TIF_FREEZE) @@ -149,13 +147,33 @@ extern void free_thread_info(struct thread_info *ti); /* work to do on any return to u-space */ #define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \ - _TIF_SINGLESTEP | _TIF_RESTORE_SIGMASK | \ - _TIF_NOTIFY_RESUME | _TIF_SYSCALL_TRACEPOINT) + _TIF_SINGLESTEP | _TIF_NOTIFY_RESUME | \ + _TIF_SYSCALL_TRACEPOINT) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \ _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP)) +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_RESTORE_SIGMASK 0x0001 /* restore signal mask in do_signal() */ +#define TS_USEDFPU 0x0002 /* FPU used by this task this quantum */ + +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->status |= TS_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags); +} +#endif /* !__ASSEMBLY__ */ + #endif /* __KERNEL__ */ #endif /* __ASM_SH_THREAD_INFO_H */ diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h index 65e7bd2f2240..37cdadd975ac 100644 --- a/arch/sh/include/asm/topology.h +++ b/arch/sh/include/asm/topology.h @@ -40,6 +40,14 @@ #endif +#define mc_capable() (1) + +const struct cpumask *cpu_coregroup_mask(unsigned int cpu); + +extern cpumask_t cpu_core_map[NR_CPUS]; + +#define topology_core_cpumask(cpu) (&cpu_core_map[cpu]) + #include <asm-generic/topology.h> #endif /* _ASM_SH_TOPOLOGY_H */ diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h index 4ca4b7717371..9bf961684431 100644 --- a/arch/sh/include/asm/ubc.h +++ b/arch/sh/include/asm/ubc.h @@ -60,16 +60,5 @@ #define BRCR_UBDE (1 << 0) #endif -#ifndef __ASSEMBLY__ -/* arch/sh/kernel/cpu/ubc.S */ -extern void ubc_sleep(void); - -#ifdef CONFIG_UBC_WAKEUP -extern void ubc_wakeup(void); -#else -#define ubc_wakeup() do { } while (0) -#endif -#endif - #endif /* __KERNEL__ */ #endif /* __ASM_SH_UBC_H */ diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h index 2fe7cee9e43a..19dfff5c8511 100644 --- a/arch/sh/include/asm/watchdog.h +++ b/arch/sh/include/asm/watchdog.h @@ -2,6 +2,8 @@ * include/asm-sh/watchdog.h * * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2009 Siemens AG + * Copyright (C) 2009 Valentin Sitdikov * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -61,6 +63,61 @@ #define WTCSR_CKS_2048 0x06 #define WTCSR_CKS_4096 0x07 +#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780) +/** + * sh_wdt_read_cnt - Read from Counter + * Reads back the WTCNT value. + */ +static inline __u32 sh_wdt_read_cnt(void) +{ + return ctrl_inl(WTCNT_R); +} + +/** + * sh_wdt_write_cnt - Write to Counter + * @val: Value to write + * + * Writes the given value @val to the lower byte of the timer counter. + * The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_cnt(__u32 val) +{ + ctrl_outl((WTCNT_HIGH << 24) | (__u32)val, WTCNT); +} + +/** + * sh_wdt_write_bst - Write to Counter + * @val: Value to write + * + * Writes the given value @val to the lower byte of the timer counter. + * The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_bst(__u32 val) +{ + ctrl_outl((WTBST_HIGH << 24) | (__u32)val, WTBST); +} +/** + * sh_wdt_read_csr - Read from Control/Status Register + * + * Reads back the WTCSR value. + */ +static inline __u32 sh_wdt_read_csr(void) +{ + return ctrl_inl(WTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Control/Status Register + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_csr(__u32 val) +{ + ctrl_outl((WTCSR_HIGH << 24) | (__u32)val, WTCSR); +} +#else /** * sh_wdt_read_cnt - Read from Counter * Reads back the WTCNT value. @@ -103,6 +160,6 @@ static inline void sh_wdt_write_csr(__u8 val) { ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR); } - +#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */ #endif /* __KERNEL__ */ #endif /* __ASM_SH_WATCHDOG_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h index 259f6a0ce23d..7672301d0c70 100644 --- a/arch/sh/include/cpu-sh4/cpu/watchdog.h +++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h @@ -2,6 +2,8 @@ * include/asm-sh/cpu-sh4/watchdog.h * * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2009 Siemens AG + * Copyright (C) 2009 Sitdikov Valentin * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,9 +12,20 @@ #ifndef __ASM_CPU_SH4_WATCHDOG_H #define __ASM_CPU_SH4_WATCHDOG_H +#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780) +/* Prefix definition */ +#define WTBST_HIGH 0x55 +/* Register definitions */ +#define WTCNT_R 0xffcc0010 /*WDTCNT*/ +#define WTCSR 0xffcc0004 /*WDTCSR*/ +#define WTCNT 0xffcc0000 /*WDTST*/ +#define WTST WTCNT +#define WTBST 0xffcc0008 /*WDTBST*/ +#else /* Register definitions */ #define WTCNT 0xffc00008 #define WTCSR 0xffc0000c +#endif /* Bit definitions */ #define WTCSR_TME 0x80 diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h index 03f3583c8918..4a674d27cbb8 100644 --- a/arch/sh/include/mach-common/mach/titan.h +++ b/arch/sh/include/mach-common/mach/titan.h @@ -1,5 +1,5 @@ /* - * Platform defintions for Titan + * Platform definitions for Titan */ #ifndef _ASM_SH_TITAN_H #define _ASM_SH_TITAN_H diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt index 8b8e4fa1fee9..cc737b807334 100644 --- a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt +++ b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt @@ -22,13 +22,12 @@ ED 0xff000010, 0x00000004 LIST "setup clocks" ED 0xa4150024, 0x00004000 ED 0xa4150000, 0x8E003508 -ED 0xa4150004, 0x00000000 WAIT 1 LIST "BSC" ED 0xff800020, 0xa5a50000 -ED 0xfec10000, 0x00000013 +ED 0xfec10000, 0x00001013 ED 0xfec10004, 0x11110400 ED 0xfec10024, 0x00000440 diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h index e971d9a82f4a..16505bfb8a9e 100644 --- a/arch/sh/include/mach-se/mach/se7722.h +++ b/arch/sh/include/mach-se/mach/se7722.h @@ -92,18 +92,11 @@ #define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ #define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ #define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ - #define SE7722_FPGA_IRQ_NR 6 -#define SE7722_FPGA_IRQ_BASE 110 - -#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) -#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) /* arch/sh/boards/se/7722/irq.c */ +extern unsigned int se7722_fpga_irq[]; + void init_se7722_IRQ(void); #define __IO_PREFIX se7722 diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index a2d0a40f3848..0471a3eb25ed 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -9,8 +9,12 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_ftrace.o = -pg endif -obj-y := debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o \ - machvec.o nmi_debug.o process_$(BITS).o ptrace_$(BITS).o \ +CFLAGS_REMOVE_return_address.o = -pg + +obj-y := debugtraps.o dma-nommu.o dumpstack.o \ + idle.o io.o io_generic.o irq.o \ + irq_$(BITS).o machvec.o nmi_debug.o process_$(BITS).o \ + ptrace_$(BITS).o return_address.o \ setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o \ syscalls_$(BITS).o time.o topology.o traps.o \ traps_$(BITS).o unwinder.o @@ -28,13 +32,13 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o obj-$(CONFIG_KPROBES) += kprobes.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_DUMP_CODE) += disassemble.o obj-$(CONFIG_HIBERNATION) += swsusp.o obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o +obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c index d218e808294e..08a2be775b6c 100644 --- a/arch/sh/kernel/asm-offsets.c +++ b/arch/sh/kernel/asm-offsets.c @@ -34,5 +34,28 @@ int main(void) DEFINE(PBE_NEXT, offsetof(struct pbe, next)); DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs)); #endif + + DEFINE(SH_SLEEP_MODE, offsetof(struct sh_sleep_data, mode)); + DEFINE(SH_SLEEP_SF_PRE, offsetof(struct sh_sleep_data, sf_pre)); + DEFINE(SH_SLEEP_SF_POST, offsetof(struct sh_sleep_data, sf_post)); + DEFINE(SH_SLEEP_RESUME, offsetof(struct sh_sleep_data, resume)); + DEFINE(SH_SLEEP_VBR, offsetof(struct sh_sleep_data, vbr)); + DEFINE(SH_SLEEP_SPC, offsetof(struct sh_sleep_data, spc)); + DEFINE(SH_SLEEP_SR, offsetof(struct sh_sleep_data, sr)); + DEFINE(SH_SLEEP_SP, offsetof(struct sh_sleep_data, sp)); + DEFINE(SH_SLEEP_BASE_ADDR, offsetof(struct sh_sleep_data, addr)); + DEFINE(SH_SLEEP_BASE_DATA, offsetof(struct sh_sleep_data, data)); + DEFINE(SH_SLEEP_REG_STBCR, offsetof(struct sh_sleep_regs, stbcr)); + DEFINE(SH_SLEEP_REG_BAR, offsetof(struct sh_sleep_regs, bar)); + DEFINE(SH_SLEEP_REG_PTEH, offsetof(struct sh_sleep_regs, pteh)); + DEFINE(SH_SLEEP_REG_PTEL, offsetof(struct sh_sleep_regs, ptel)); + DEFINE(SH_SLEEP_REG_TTB, offsetof(struct sh_sleep_regs, ttb)); + DEFINE(SH_SLEEP_REG_TEA, offsetof(struct sh_sleep_regs, tea)); + DEFINE(SH_SLEEP_REG_MMUCR, offsetof(struct sh_sleep_regs, mmucr)); + DEFINE(SH_SLEEP_REG_PTEA, offsetof(struct sh_sleep_regs, ptea)); + DEFINE(SH_SLEEP_REG_PASCR, offsetof(struct sh_sleep_regs, pascr)); + DEFINE(SH_SLEEP_REG_IRMCR, offsetof(struct sh_sleep_regs, irmcr)); + DEFINE(SH_SLEEP_REG_CCR, offsetof(struct sh_sleep_regs, ccr)); + DEFINE(SH_SLEEP_REG_RAMCR, offsetof(struct sh_sleep_regs, ramcr)); return 0; } diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index 3d6b9312dc47..d97c803719ec 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/ # Common interfaces. -obj-$(CONFIG_UBC_WAKEUP) += ubc.o obj-$(CONFIG_SH_ADC) += adc.o obj-$(CONFIG_SH_CLK_CPG) += clock-cpg.o diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index e932ebef4738..89b4b76c0d76 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -75,16 +75,11 @@ static void __init expmask_init(void) /* * Future proofing. * - * Disable support for slottable sleep instruction - * and non-nop instructions in the rte delay slot. + * Disable support for slottable sleep instruction, non-nop + * instructions in the rte delay slot, and associative writes to + * the memory-mapped cache array. */ - expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP); - - /* - * Enable associative writes to the memory-mapped cache array - * until the cache flush ops have been rewritten. - */ - expmask |= EXPMASK_MMCAW; + expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW); __raw_writel(expmask, EXPMASK); ctrl_barrier(); @@ -311,12 +306,12 @@ asmlinkage void __init sh_cpu_init(void) if (fpu_disabled) { printk("FPU Disabled\n"); current_cpu_data.flags &= ~CPU_HAS_FPU; - disable_fpu(); } /* FPU initialization */ + disable_fpu(); if ((current_cpu_data.flags & CPU_HAS_FPU)) { - clear_thread_flag(TIF_USEDFPU); + current_thread_info()->status &= ~TS_USEDFPU; clear_used_math(); } @@ -338,17 +333,6 @@ asmlinkage void __init sh_cpu_init(void) } #endif - /* - * Some brain-damaged loaders decided it would be a good idea to put - * the UBC to sleep. This causes some issues when it comes to things - * like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB. So .. - * we wake it up and hope that all is well. - */ -#ifdef CONFIG_SUPERH32 - if (raw_smp_processor_id() == 0) - ubc_wakeup(); -#endif - speculative_execution_init(); expmask_init(); } diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c index 6df2fb98eb30..d395ce5740e7 100644 --- a/arch/sh/kernel/cpu/sh2a/fpu.c +++ b/arch/sh/kernel/cpu/sh2a/fpu.c @@ -25,14 +25,12 @@ /* * Save FPU registers onto task structure. - * Assume called with FPU enabled (SR.FD=0). */ void -save_fpu(struct task_struct *tsk, struct pt_regs *regs) +save_fpu(struct task_struct *tsk) { unsigned long dummy; - clear_tsk_thread_flag(tsk, TIF_USEDFPU); enable_fpu(); asm volatile("sts.l fpul, @-%0\n\t" "sts.l fpscr, @-%0\n\t" @@ -60,7 +58,6 @@ save_fpu(struct task_struct *tsk, struct pt_regs *regs) : "memory"); disable_fpu(); - release_fpu(regs); } static void @@ -598,31 +595,31 @@ BUILD_TRAP_HANDLER(fpu_error) struct task_struct *tsk = current; TRAP_HANDLER_DECL; - save_fpu(tsk, regs); + __unlazy_fpu(tsk, regs); if (ieee_fpe_handler(regs)) { tsk->thread.fpu.hard.fpscr &= ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); grab_fpu(regs); restore_fpu(tsk); - set_tsk_thread_flag(tsk, TIF_USEDFPU); + task_thread_info(tsk)->status |= TS_USEDFPU; return; } force_sig(SIGFPE, tsk); } -BUILD_TRAP_HANDLER(fpu_state_restore) +void fpu_state_restore(struct pt_regs *regs) { struct task_struct *tsk = current; - TRAP_HANDLER_DECL; grab_fpu(regs); - if (!user_mode(regs)) { + if (unlikely(!user_mode(regs))) { printk(KERN_ERR "BUG: FPU is used in kernel mode.\n"); + BUG(); return; } - if (used_math()) { + if (likely(used_math())) { /* Using the FPU again. */ restore_fpu(tsk); } else { @@ -630,5 +627,13 @@ BUILD_TRAP_HANDLER(fpu_state_restore) fpu_init(); set_used_math(); } - set_tsk_thread_flag(tsk, TIF_USEDFPU); + task_thread_info(tsk)->status |= TS_USEDFPU; + tsk->fpu_counter++; +} + +BUILD_TRAP_HANDLER(fpu_state_restore) +{ + TRAP_HANDLER_DECL; + + fpu_state_restore(regs); } diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index bb407ef0b91e..3f7e2a22c7c2 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -297,41 +297,8 @@ ENTRY(vbr_base) ! .balign 256,0,256 general_exception: -#ifndef CONFIG_CPU_SUBTYPE_SHX3 bra handle_exception sts pr, k3 ! save original pr value in k3 -#else - mov.l 1f, k4 - mov.l @k4, k4 - - ! Is EXPEVT larger than 0x800? - mov #0x8, k0 - shll8 k0 - cmp/hs k0, k4 - bf 0f - - ! then add 0x580 (k2 is 0xd80 or 0xda0) - mov #0x58, k0 - shll2 k0 - shll2 k0 - add k0, k4 -0: - ! Setup stack and save DSP context (k0 contains original r15 on return) - bsr prepare_stack - nop - - ! Save registers / Switch to bank 0 - mov k4, k2 ! keep vector in k2 - mov.l 1f, k4 ! SR bits to clear in k4 - bsr save_regs ! needs original pr value in k3 - nop - - bra handle_exception_special - nop - - .align 2 -1: .long EXPEVT -#endif ! prepare_stack() ! - roll back gRB diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index 203b18347b83..3a1dbc709831 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -9,6 +9,11 @@ obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o) obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o +# Perf events +perf-$(CONFIG_CPU_SUBTYPE_SH7750) := perf_event.o +perf-$(CONFIG_CPU_SUBTYPE_SH7750S) := perf_event.o +perf-$(CONFIG_CPU_SUBTYPE_SH7091) := perf_event.o + # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o @@ -27,4 +32,5 @@ endif # Additional clocks by subtype clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o -obj-y += $(clock-y) +obj-y += $(clock-y) +obj-$(CONFIG_PERF_EVENTS) += $(perf-y) diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index e3ea5411da6d..e97857aec8a0 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -41,13 +41,11 @@ static unsigned int fpu_exception_flags; /* * Save FPU registers onto task structure. - * Assume called with FPU enabled (SR.FD=0). */ -void save_fpu(struct task_struct *tsk, struct pt_regs *regs) +void save_fpu(struct task_struct *tsk) { unsigned long dummy; - clear_tsk_thread_flag(tsk, TIF_USEDFPU); enable_fpu(); asm volatile ("sts.l fpul, @-%0\n\t" "sts.l fpscr, @-%0\n\t" @@ -92,7 +90,6 @@ void save_fpu(struct task_struct *tsk, struct pt_regs *regs) :"memory"); disable_fpu(); - release_fpu(regs); } static void restore_fpu(struct task_struct *tsk) @@ -285,7 +282,6 @@ static int ieee_fpe_handler(struct pt_regs *regs) /* fcnvsd */ struct task_struct *tsk = current; - save_fpu(tsk, regs); if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)) /* FPU error */ denormal_to_double(&tsk->thread.fpu.hard, @@ -462,7 +458,7 @@ BUILD_TRAP_HANDLER(fpu_error) struct task_struct *tsk = current; TRAP_HANDLER_DECL; - save_fpu(tsk, regs); + __unlazy_fpu(tsk, regs); fpu_exception_flags = 0; if (ieee_fpe_handler(regs)) { tsk->thread.fpu.hard.fpscr &= @@ -473,7 +469,7 @@ BUILD_TRAP_HANDLER(fpu_error) tsk->thread.fpu.hard.fpscr |= (fpu_exception_flags >> 10); grab_fpu(regs); restore_fpu(tsk); - set_tsk_thread_flag(tsk, TIF_USEDFPU); + task_thread_info(tsk)->status |= TS_USEDFPU; if ((((tsk->thread.fpu.hard.fpscr & FPSCR_ENABLE_MASK) >> 7) & (fpu_exception_flags >> 2)) == 0) { return; @@ -483,18 +479,18 @@ BUILD_TRAP_HANDLER(fpu_error) force_sig(SIGFPE, tsk); } -BUILD_TRAP_HANDLER(fpu_state_restore) +void fpu_state_restore(struct pt_regs *regs) { struct task_struct *tsk = current; - TRAP_HANDLER_DECL; grab_fpu(regs); - if (!user_mode(regs)) { + if (unlikely(!user_mode(regs))) { printk(KERN_ERR "BUG: FPU is used in kernel mode.\n"); + BUG(); return; } - if (used_math()) { + if (likely(used_math())) { /* Using the FPU again. */ restore_fpu(tsk); } else { @@ -502,5 +498,13 @@ BUILD_TRAP_HANDLER(fpu_state_restore) fpu_init(); set_used_math(); } - set_tsk_thread_flag(tsk, TIF_USEDFPU); + task_thread_info(tsk)->status |= TS_USEDFPU; + tsk->fpu_counter++; +} + +BUILD_TRAP_HANDLER(fpu_state_restore) +{ + TRAP_HANDLER_DECL; + + fpu_state_restore(regs); } diff --git a/arch/sh/kernel/cpu/sh4/perf_event.c b/arch/sh/kernel/cpu/sh4/perf_event.c new file mode 100644 index 000000000000..7f9ecc9c2d02 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/perf_event.c @@ -0,0 +1,253 @@ +/* + * Performance events support for SH7750-style performance counters + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/perf_event.h> +#include <asm/processor.h> + +#define PM_CR_BASE 0xff000084 /* 16-bit */ +#define PM_CTR_BASE 0xff100004 /* 32-bit */ + +#define PMCR(n) (PM_CR_BASE + ((n) * 0x04)) +#define PMCTRH(n) (PM_CTR_BASE + 0x00 + ((n) * 0x08)) +#define PMCTRL(n) (PM_CTR_BASE + 0x04 + ((n) * 0x08)) + +#define PMCR_PMM_MASK 0x0000003f + +#define PMCR_CLKF 0x00000100 +#define PMCR_PMCLR 0x00002000 +#define PMCR_PMST 0x00004000 +#define PMCR_PMEN 0x00008000 + +static struct sh_pmu sh7750_pmu; + +/* + * There are a number of events supported by each counter (33 in total). + * Since we have 2 counters, each counter will take the event code as it + * corresponds to the PMCR PMM setting. Each counter can be configured + * independently. + * + * Event Code Description + * ---------- ----------- + * + * 0x01 Operand read access + * 0x02 Operand write access + * 0x03 UTLB miss + * 0x04 Operand cache read miss + * 0x05 Operand cache write miss + * 0x06 Instruction fetch (w/ cache) + * 0x07 Instruction TLB miss + * 0x08 Instruction cache miss + * 0x09 All operand accesses + * 0x0a All instruction accesses + * 0x0b OC RAM operand access + * 0x0d On-chip I/O space access + * 0x0e Operand access (r/w) + * 0x0f Operand cache miss (r/w) + * 0x10 Branch instruction + * 0x11 Branch taken + * 0x12 BSR/BSRF/JSR + * 0x13 Instruction execution + * 0x14 Instruction execution in parallel + * 0x15 FPU Instruction execution + * 0x16 Interrupt + * 0x17 NMI + * 0x18 trapa instruction execution + * 0x19 UBCA match + * 0x1a UBCB match + * 0x21 Instruction cache fill + * 0x22 Operand cache fill + * 0x23 Elapsed time + * 0x24 Pipeline freeze by I-cache miss + * 0x25 Pipeline freeze by D-cache miss + * 0x27 Pipeline freeze by branch instruction + * 0x28 Pipeline freeze by CPU register + * 0x29 Pipeline freeze by FPU + */ + +static const int sh7750_general_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0x0023, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x000a, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0006, /* I-cache */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x0008, /* I-cache */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0010, + [PERF_COUNT_HW_BRANCH_MISSES] = -1, + [PERF_COUNT_HW_BUS_CYCLES] = -1, +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +static const int sh7750_cache_events + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = +{ + [ C(L1D) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0001, + [ C(RESULT_MISS) ] = 0x0004, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0x0002, + [ C(RESULT_MISS) ] = 0x0005, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + + [ C(L1I) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0006, + [ C(RESULT_MISS) ] = 0x0008, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + + [ C(LL) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + + [ C(DTLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0x0003, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + + [ C(ITLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0x0007, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + + [ C(BPU) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, +}; + +static int sh7750_event_map(int event) +{ + return sh7750_general_events[event]; +} + +static u64 sh7750_pmu_read(int idx) +{ + return (u64)((u64)(__raw_readl(PMCTRH(idx)) & 0xffff) << 32) | + __raw_readl(PMCTRL(idx)); +} + +static void sh7750_pmu_disable(struct hw_perf_event *hwc, int idx) +{ + unsigned int tmp; + + tmp = __raw_readw(PMCR(idx)); + tmp &= ~(PMCR_PMM_MASK | PMCR_PMEN); + __raw_writew(tmp, PMCR(idx)); +} + +static void sh7750_pmu_enable(struct hw_perf_event *hwc, int idx) +{ + __raw_writew(__raw_readw(PMCR(idx)) | PMCR_PMCLR, PMCR(idx)); + __raw_writew(hwc->config | PMCR_PMEN | PMCR_PMST, PMCR(idx)); +} + +static void sh7750_pmu_disable_all(void) +{ + int i; + + for (i = 0; i < sh7750_pmu.num_events; i++) + __raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i)); +} + +static void sh7750_pmu_enable_all(void) +{ + int i; + + for (i = 0; i < sh7750_pmu.num_events; i++) + __raw_writew(__raw_readw(PMCR(i)) | PMCR_PMEN, PMCR(i)); +} + +static struct sh_pmu sh7750_pmu = { + .name = "SH7750", + .num_events = 2, + .event_map = sh7750_event_map, + .max_events = ARRAY_SIZE(sh7750_general_events), + .raw_event_mask = PMCR_PMM_MASK, + .cache_events = &sh7750_cache_events, + .read = sh7750_pmu_read, + .disable = sh7750_pmu_disable, + .enable = sh7750_pmu_enable, + .disable_all = sh7750_pmu_disable_all, + .enable_all = sh7750_pmu_enable_all, +}; + +static int __init sh7750_pmu_init(void) +{ + /* + * Make sure this CPU actually has perf counters. + */ + if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) { + pr_notice("HW perf events unsupported, software events only.\n"); + return -ENODEV; + } + + return register_sh_pmu(&sh7750_pmu); +} +arch_initcall(sh7750_pmu_init); diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 490d5dc9e372..33bab477d2e2 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -44,3 +44,4 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o obj-y += $(clock-y) obj-$(CONFIG_SMP) += $(smp-y) obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) +obj-$(CONFIG_PERF_EVENTS) += perf_event.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index dfe9192be63e..9db743802f06 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -152,7 +152,7 @@ struct clk div6_clks[] = { SH_CLK_DIV6("fsia_clk", &div3_clk, FCLKACR, 0), SH_CLK_DIV6("fsib_clk", &div3_clk, FCLKBCR, 0), SH_CLK_DIV6("irda_clk", &div3_clk, IRDACLKCR, 0), - SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, 0), + SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT), }; #define R_CLK (&r_clk) diff --git a/arch/sh/kernel/cpu/sh4a/perf_event.c b/arch/sh/kernel/cpu/sh4a/perf_event.c new file mode 100644 index 000000000000..eddc21973fa1 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/perf_event.c @@ -0,0 +1,269 @@ +/* + * Performance events support for SH-4A performance counters + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/perf_event.h> +#include <asm/processor.h> + +#define PPC_CCBR(idx) (0xff200800 + (sizeof(u32) * idx)) +#define PPC_PMCTR(idx) (0xfc100000 + (sizeof(u32) * idx)) + +#define CCBR_CIT_MASK (0x7ff << 6) +#define CCBR_DUC (1 << 3) +#define CCBR_CMDS (1 << 1) +#define CCBR_PPCE (1 << 0) + +#define PPC_PMCAT 0xfc100080 + +#define PMCAT_OVF3 (1 << 27) +#define PMCAT_CNN3 (1 << 26) +#define PMCAT_CLR3 (1 << 25) +#define PMCAT_OVF2 (1 << 19) +#define PMCAT_CLR2 (1 << 17) +#define PMCAT_OVF1 (1 << 11) +#define PMCAT_CNN1 (1 << 10) +#define PMCAT_CLR1 (1 << 9) +#define PMCAT_OVF0 (1 << 3) +#define PMCAT_CLR0 (1 << 1) + +static struct sh_pmu sh4a_pmu; + +/* + * Supported raw event codes: + * + * Event Code Description + * ---------- ----------- + * + * 0x0000 number of elapsed cycles + * 0x0200 number of elapsed cycles in privileged mode + * 0x0280 number of elapsed cycles while SR.BL is asserted + * 0x0202 instruction execution + * 0x0203 instruction execution in parallel + * 0x0204 number of unconditional branches + * 0x0208 number of exceptions + * 0x0209 number of interrupts + * 0x0220 UTLB miss caused by instruction fetch + * 0x0222 UTLB miss caused by operand access + * 0x02a0 number of ITLB misses + * 0x0028 number of accesses to instruction memories + * 0x0029 number of accesses to instruction cache + * 0x002a instruction cache miss + * 0x022e number of access to instruction X/Y memory + * 0x0030 number of reads to operand memories + * 0x0038 number of writes to operand memories + * 0x0031 number of operand cache read accesses + * 0x0039 number of operand cache write accesses + * 0x0032 operand cache read miss + * 0x003a operand cache write miss + * 0x0236 number of reads to operand X/Y memory + * 0x023e number of writes to operand X/Y memory + * 0x0237 number of reads to operand U memory + * 0x023f number of writes to operand U memory + * 0x0337 number of U memory read buffer misses + * 0x02b4 number of wait cycles due to operand read access + * 0x02bc number of wait cycles due to operand write access + * 0x0033 number of wait cycles due to operand cache read miss + * 0x003b number of wait cycles due to operand cache write miss + */ + +/* + * Special reserved bits used by hardware emulators, read values will + * vary, but writes must always be 0. + */ +#define PMCAT_EMU_CLR_MASK ((1 << 24) | (1 << 16) | (1 << 8) | (1 << 0)) + +static const int sh4a_general_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 0x0000, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x0202, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0029, /* I-cache */ + [PERF_COUNT_HW_CACHE_MISSES] = 0x002a, /* I-cache */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0204, + [PERF_COUNT_HW_BRANCH_MISSES] = -1, + [PERF_COUNT_HW_BUS_CYCLES] = -1, +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +static const int sh4a_cache_events + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = +{ + [ C(L1D) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0031, + [ C(RESULT_MISS) ] = 0x0032, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0x0039, + [ C(RESULT_MISS) ] = 0x003a, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + + [ C(L1I) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0029, + [ C(RESULT_MISS) ] = 0x002a, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + + [ C(LL) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0030, + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0x0038, + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + + [ C(DTLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0222, + [ C(RESULT_MISS) ] = 0x0220, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0, + }, + }, + + [ C(ITLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = 0x02a0, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + + [ C(BPU) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, +}; + +static int sh4a_event_map(int event) +{ + return sh4a_general_events[event]; +} + +static u64 sh4a_pmu_read(int idx) +{ + return __raw_readl(PPC_PMCTR(idx)); +} + +static void sh4a_pmu_disable(struct hw_perf_event *hwc, int idx) +{ + unsigned int tmp; + + tmp = __raw_readl(PPC_CCBR(idx)); + tmp &= ~(CCBR_CIT_MASK | CCBR_DUC); + __raw_writel(tmp, PPC_CCBR(idx)); +} + +static void sh4a_pmu_enable(struct hw_perf_event *hwc, int idx) +{ + unsigned int tmp; + + tmp = __raw_readl(PPC_PMCAT); + tmp &= ~PMCAT_EMU_CLR_MASK; + tmp |= idx ? PMCAT_CLR1 : PMCAT_CLR0; + __raw_writel(tmp, PPC_PMCAT); + + tmp = __raw_readl(PPC_CCBR(idx)); + tmp |= (hwc->config << 6) | CCBR_CMDS | CCBR_PPCE; + __raw_writel(tmp, PPC_CCBR(idx)); + + __raw_writel(__raw_readl(PPC_CCBR(idx)) | CCBR_DUC, PPC_CCBR(idx)); +} + +static void sh4a_pmu_disable_all(void) +{ + int i; + + for (i = 0; i < sh4a_pmu.num_events; i++) + __raw_writel(__raw_readl(PPC_CCBR(i)) & ~CCBR_DUC, PPC_CCBR(i)); +} + +static void sh4a_pmu_enable_all(void) +{ + int i; + + for (i = 0; i < sh4a_pmu.num_events; i++) + __raw_writel(__raw_readl(PPC_CCBR(i)) | CCBR_DUC, PPC_CCBR(i)); +} + +static struct sh_pmu sh4a_pmu = { + .name = "SH-4A", + .num_events = 2, + .event_map = sh4a_event_map, + .max_events = ARRAY_SIZE(sh4a_general_events), + .raw_event_mask = 0x3ff, + .cache_events = &sh4a_cache_events, + .read = sh4a_pmu_read, + .disable = sh4a_pmu_disable, + .enable = sh4a_pmu_enable, + .disable_all = sh4a_pmu_disable_all, + .enable_all = sh4a_pmu_enable_all, +}; + +static int __init sh4a_pmu_init(void) +{ + /* + * Make sure this CPU actually has perf counters. + */ + if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) { + pr_notice("HW perf events unsupported, software events only.\n"); + return -ENODEV; + } + + return register_sh_pmu(&sh4a_pmu); +} +arch_initcall(sh4a_pmu_init); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index f3851fd757ec..845e89c936e7 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -20,6 +20,8 @@ #include <linux/uio_driver.h> #include <linux/sh_timer.h> #include <linux/io.h> +#include <linux/notifier.h> +#include <asm/suspend.h> #include <asm/clock.h> #include <asm/mmzone.h> #include <cpu/sh7724.h> @@ -202,7 +204,7 @@ static struct resource veu0_resources[] = { [0] = { .name = "VEU3F0", .start = 0xfe920000, - .end = 0xfe9200cb - 1, + .end = 0xfe9200cb, .flags = IORESOURCE_MEM, }, [1] = { @@ -234,7 +236,7 @@ static struct resource veu1_resources[] = { [0] = { .name = "VEU3F1", .start = 0xfe924000, - .end = 0xfe9240cb - 1, + .end = 0xfe9240cb, .flags = IORESOURCE_MEM, }, [1] = { @@ -523,6 +525,70 @@ static struct platform_device jpu_device = { }, }; +/* SPU2DSP0 */ +static struct uio_info spu0_platform_data = { + .name = "SPU2DSP0", + .version = "0", + .irq = 86, +}; + +static struct resource spu0_resources[] = { + [0] = { + .name = "SPU2DSP0", + .start = 0xFE200000, + .end = 0xFE2FFFFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device spu0_device = { + .name = "uio_pdrv_genirq", + .id = 4, + .dev = { + .platform_data = &spu0_platform_data, + }, + .resource = spu0_resources, + .num_resources = ARRAY_SIZE(spu0_resources), + .archdata = { + .hwblk_id = HWBLK_SPU, + }, +}; + +/* SPU2DSP1 */ +static struct uio_info spu1_platform_data = { + .name = "SPU2DSP1", + .version = "0", + .irq = 87, +}; + +static struct resource spu1_resources[] = { + [0] = { + .name = "SPU2DSP1", + .start = 0xFE300000, + .end = 0xFE3FFFFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device spu1_device = { + .name = "uio_pdrv_genirq", + .id = 5, + .dev = { + .platform_data = &spu1_platform_data, + }, + .resource = spu1_resources, + .num_resources = ARRAY_SIZE(spu1_resources), + .archdata = { + .hwblk_id = HWBLK_SPU, + }, +}; + static struct platform_device *sh7724_devices[] __initdata = { &cmt_device, &tmu0_device, @@ -539,6 +605,8 @@ static struct platform_device *sh7724_devices[] __initdata = { &veu0_device, &veu1_device, &jpu_device, + &spu0_device, + &spu1_device, }; static int __init sh7724_devices_setup(void) @@ -547,6 +615,8 @@ static int __init sh7724_devices_setup(void) platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20); + platform_resource_setup_memory(&spu0_device, "spu0", 2 << 20); + platform_resource_setup_memory(&spu1_device, "spu1", 2 << 20); return platform_add_devices(sh7724_devices, ARRAY_SIZE(sh7724_devices)); @@ -827,3 +897,193 @@ void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); } + +static struct { + /* BSC */ + unsigned long mmselr; + unsigned long cs0bcr; + unsigned long cs4bcr; + unsigned long cs5abcr; + unsigned long cs5bbcr; + unsigned long cs6abcr; + unsigned long cs6bbcr; + unsigned long cs4wcr; + unsigned long cs5awcr; + unsigned long cs5bwcr; + unsigned long cs6awcr; + unsigned long cs6bwcr; + /* INTC */ + unsigned short ipra; + unsigned short iprb; + unsigned short iprc; + unsigned short iprd; + unsigned short ipre; + unsigned short iprf; + unsigned short iprg; + unsigned short iprh; + unsigned short ipri; + unsigned short iprj; + unsigned short iprk; + unsigned short iprl; + unsigned char imr0; + unsigned char imr1; + unsigned char imr2; + unsigned char imr3; + unsigned char imr4; + unsigned char imr5; + unsigned char imr6; + unsigned char imr7; + unsigned char imr8; + unsigned char imr9; + unsigned char imr10; + unsigned char imr11; + unsigned char imr12; + /* RWDT */ + unsigned short rwtcnt; + unsigned short rwtcsr; + /* CPG */ + unsigned long irdaclk; + unsigned long spuclk; +} sh7724_rstandby_state; + +static int sh7724_pre_sleep_notifier_call(struct notifier_block *nb, + unsigned long flags, void *unused) +{ + if (!(flags & SUSP_SH_RSTANDBY)) + return NOTIFY_DONE; + + /* BCR */ + sh7724_rstandby_state.mmselr = __raw_readl(0xff800020); /* MMSELR */ + sh7724_rstandby_state.mmselr |= 0xa5a50000; + sh7724_rstandby_state.cs0bcr = __raw_readl(0xfec10004); /* CS0BCR */ + sh7724_rstandby_state.cs4bcr = __raw_readl(0xfec10010); /* CS4BCR */ + sh7724_rstandby_state.cs5abcr = __raw_readl(0xfec10014); /* CS5ABCR */ + sh7724_rstandby_state.cs5bbcr = __raw_readl(0xfec10018); /* CS5BBCR */ + sh7724_rstandby_state.cs6abcr = __raw_readl(0xfec1001c); /* CS6ABCR */ + sh7724_rstandby_state.cs6bbcr = __raw_readl(0xfec10020); /* CS6BBCR */ + sh7724_rstandby_state.cs4wcr = __raw_readl(0xfec10030); /* CS4WCR */ + sh7724_rstandby_state.cs5awcr = __raw_readl(0xfec10034); /* CS5AWCR */ + sh7724_rstandby_state.cs5bwcr = __raw_readl(0xfec10038); /* CS5BWCR */ + sh7724_rstandby_state.cs6awcr = __raw_readl(0xfec1003c); /* CS6AWCR */ + sh7724_rstandby_state.cs6bwcr = __raw_readl(0xfec10040); /* CS6BWCR */ + + /* INTC */ + sh7724_rstandby_state.ipra = __raw_readw(0xa4080000); /* IPRA */ + sh7724_rstandby_state.iprb = __raw_readw(0xa4080004); /* IPRB */ + sh7724_rstandby_state.iprc = __raw_readw(0xa4080008); /* IPRC */ + sh7724_rstandby_state.iprd = __raw_readw(0xa408000c); /* IPRD */ + sh7724_rstandby_state.ipre = __raw_readw(0xa4080010); /* IPRE */ + sh7724_rstandby_state.iprf = __raw_readw(0xa4080014); /* IPRF */ + sh7724_rstandby_state.iprg = __raw_readw(0xa4080018); /* IPRG */ + sh7724_rstandby_state.iprh = __raw_readw(0xa408001c); /* IPRH */ + sh7724_rstandby_state.ipri = __raw_readw(0xa4080020); /* IPRI */ + sh7724_rstandby_state.iprj = __raw_readw(0xa4080024); /* IPRJ */ + sh7724_rstandby_state.iprk = __raw_readw(0xa4080028); /* IPRK */ + sh7724_rstandby_state.iprl = __raw_readw(0xa408002c); /* IPRL */ + sh7724_rstandby_state.imr0 = __raw_readb(0xa4080080); /* IMR0 */ + sh7724_rstandby_state.imr1 = __raw_readb(0xa4080084); /* IMR1 */ + sh7724_rstandby_state.imr2 = __raw_readb(0xa4080088); /* IMR2 */ + sh7724_rstandby_state.imr3 = __raw_readb(0xa408008c); /* IMR3 */ + sh7724_rstandby_state.imr4 = __raw_readb(0xa4080090); /* IMR4 */ + sh7724_rstandby_state.imr5 = __raw_readb(0xa4080094); /* IMR5 */ + sh7724_rstandby_state.imr6 = __raw_readb(0xa4080098); /* IMR6 */ + sh7724_rstandby_state.imr7 = __raw_readb(0xa408009c); /* IMR7 */ + sh7724_rstandby_state.imr8 = __raw_readb(0xa40800a0); /* IMR8 */ + sh7724_rstandby_state.imr9 = __raw_readb(0xa40800a4); /* IMR9 */ + sh7724_rstandby_state.imr10 = __raw_readb(0xa40800a8); /* IMR10 */ + sh7724_rstandby_state.imr11 = __raw_readb(0xa40800ac); /* IMR11 */ + sh7724_rstandby_state.imr12 = __raw_readb(0xa40800b0); /* IMR12 */ + + /* RWDT */ + sh7724_rstandby_state.rwtcnt = __raw_readb(0xa4520000); /* RWTCNT */ + sh7724_rstandby_state.rwtcnt |= 0x5a00; + sh7724_rstandby_state.rwtcsr = __raw_readb(0xa4520004); /* RWTCSR */ + sh7724_rstandby_state.rwtcsr |= 0xa500; + __raw_writew(sh7724_rstandby_state.rwtcsr & 0x07, 0xa4520004); + + /* CPG */ + sh7724_rstandby_state.irdaclk = __raw_readl(0xa4150018); /* IRDACLKCR */ + sh7724_rstandby_state.spuclk = __raw_readl(0xa415003c); /* SPUCLKCR */ + + return NOTIFY_DONE; +} + +static int sh7724_post_sleep_notifier_call(struct notifier_block *nb, + unsigned long flags, void *unused) +{ + if (!(flags & SUSP_SH_RSTANDBY)) + return NOTIFY_DONE; + + /* BCR */ + __raw_writel(sh7724_rstandby_state.mmselr, 0xff800020); /* MMSELR */ + __raw_writel(sh7724_rstandby_state.cs0bcr, 0xfec10004); /* CS0BCR */ + __raw_writel(sh7724_rstandby_state.cs4bcr, 0xfec10010); /* CS4BCR */ + __raw_writel(sh7724_rstandby_state.cs5abcr, 0xfec10014); /* CS5ABCR */ + __raw_writel(sh7724_rstandby_state.cs5bbcr, 0xfec10018); /* CS5BBCR */ + __raw_writel(sh7724_rstandby_state.cs6abcr, 0xfec1001c); /* CS6ABCR */ + __raw_writel(sh7724_rstandby_state.cs6bbcr, 0xfec10020); /* CS6BBCR */ + __raw_writel(sh7724_rstandby_state.cs4wcr, 0xfec10030); /* CS4WCR */ + __raw_writel(sh7724_rstandby_state.cs5awcr, 0xfec10034); /* CS5AWCR */ + __raw_writel(sh7724_rstandby_state.cs5bwcr, 0xfec10038); /* CS5BWCR */ + __raw_writel(sh7724_rstandby_state.cs6awcr, 0xfec1003c); /* CS6AWCR */ + __raw_writel(sh7724_rstandby_state.cs6bwcr, 0xfec10040); /* CS6BWCR */ + + /* INTC */ + __raw_writew(sh7724_rstandby_state.ipra, 0xa4080000); /* IPRA */ + __raw_writew(sh7724_rstandby_state.iprb, 0xa4080004); /* IPRB */ + __raw_writew(sh7724_rstandby_state.iprc, 0xa4080008); /* IPRC */ + __raw_writew(sh7724_rstandby_state.iprd, 0xa408000c); /* IPRD */ + __raw_writew(sh7724_rstandby_state.ipre, 0xa4080010); /* IPRE */ + __raw_writew(sh7724_rstandby_state.iprf, 0xa4080014); /* IPRF */ + __raw_writew(sh7724_rstandby_state.iprg, 0xa4080018); /* IPRG */ + __raw_writew(sh7724_rstandby_state.iprh, 0xa408001c); /* IPRH */ + __raw_writew(sh7724_rstandby_state.ipri, 0xa4080020); /* IPRI */ + __raw_writew(sh7724_rstandby_state.iprj, 0xa4080024); /* IPRJ */ + __raw_writew(sh7724_rstandby_state.iprk, 0xa4080028); /* IPRK */ + __raw_writew(sh7724_rstandby_state.iprl, 0xa408002c); /* IPRL */ + __raw_writeb(sh7724_rstandby_state.imr0, 0xa4080080); /* IMR0 */ + __raw_writeb(sh7724_rstandby_state.imr1, 0xa4080084); /* IMR1 */ + __raw_writeb(sh7724_rstandby_state.imr2, 0xa4080088); /* IMR2 */ + __raw_writeb(sh7724_rstandby_state.imr3, 0xa408008c); /* IMR3 */ + __raw_writeb(sh7724_rstandby_state.imr4, 0xa4080090); /* IMR4 */ + __raw_writeb(sh7724_rstandby_state.imr5, 0xa4080094); /* IMR5 */ + __raw_writeb(sh7724_rstandby_state.imr6, 0xa4080098); /* IMR6 */ + __raw_writeb(sh7724_rstandby_state.imr7, 0xa408009c); /* IMR7 */ + __raw_writeb(sh7724_rstandby_state.imr8, 0xa40800a0); /* IMR8 */ + __raw_writeb(sh7724_rstandby_state.imr9, 0xa40800a4); /* IMR9 */ + __raw_writeb(sh7724_rstandby_state.imr10, 0xa40800a8); /* IMR10 */ + __raw_writeb(sh7724_rstandby_state.imr11, 0xa40800ac); /* IMR11 */ + __raw_writeb(sh7724_rstandby_state.imr12, 0xa40800b0); /* IMR12 */ + + /* RWDT */ + __raw_writew(sh7724_rstandby_state.rwtcnt, 0xa4520000); /* RWTCNT */ + __raw_writew(sh7724_rstandby_state.rwtcsr, 0xa4520004); /* RWTCSR */ + + /* CPG */ + __raw_writel(sh7724_rstandby_state.irdaclk, 0xa4150018); /* IRDACLKCR */ + __raw_writel(sh7724_rstandby_state.spuclk, 0xa415003c); /* SPUCLKCR */ + + return NOTIFY_DONE; +} + +static struct notifier_block sh7724_pre_sleep_notifier = { + .notifier_call = sh7724_pre_sleep_notifier_call, + .priority = SH_MOBILE_PRE(SH_MOBILE_SLEEP_CPU), +}; + +static struct notifier_block sh7724_post_sleep_notifier = { + .notifier_call = sh7724_post_sleep_notifier_call, + .priority = SH_MOBILE_POST(SH_MOBILE_SLEEP_CPU), +}; + +static int __init sh7724_sleep_setup(void) +{ + atomic_notifier_chain_register(&sh_mobile_pre_sleep_notifier_list, + &sh7724_pre_sleep_notifier); + + atomic_notifier_chain_register(&sh_mobile_post_sleep_notifier_list, + &sh7724_post_sleep_notifier); + return 0; +} +arch_initcall(sh7724_sleep_setup); + diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index e848443deeb9..c7ba9166e18a 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -15,6 +15,15 @@ #include <linux/sh_timer.h> #include <asm/mmzone.h> +/* + * This intentionally only registers SCIF ports 0, 1, and 3. SCIF 2 + * INTEVT values overlap with the FPU EXPEVT ones, requiring special + * demuxing in the exception dispatch path. + * + * As this overlap is something that never should have made it in to + * silicon in the first place, we just refuse to deal with the port at + * all rather than adding infrastructure to hack around it. + */ static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffc30000, @@ -27,11 +36,6 @@ static struct plat_sci_port sci_platform_data[] = { .type = PORT_SCIF, .irqs = { 44, 45, 47, 46 }, }, { - .mapbase = 0xffc50000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 48, 49, 51, 50 }, - }, { .mapbase = 0xffc60000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, @@ -268,7 +272,11 @@ enum { UNUSED = 0, /* interrupt sources */ - IRL, IRQ0, IRQ1, IRQ2, IRQ3, + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, + IRQ0, IRQ1, IRQ2, IRQ3, HUDII, TMU0, TMU1, TMU2, TMU3, TMU4, TMU5, PCII0, PCII1, PCII2, PCII3, PCII4, @@ -291,7 +299,7 @@ enum { INTICI4, INTICI5, INTICI6, INTICI7, /* interrupt groups */ - PCII56789, SCIF0, SCIF1, SCIF2, SCIF3, + IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3, DMAC0, DMAC1, }; @@ -309,8 +317,6 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0), INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0), - INTC_VECT(SCIF2_ERI, 0x800), INTC_VECT(SCIF2_RXI, 0x820), - INTC_VECT(SCIF2_BRI, 0x840), INTC_VECT(SCIF2_TXI, 0x860), INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0), INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0), INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920), @@ -344,10 +350,13 @@ static struct intc_vect vectors[] __initdata = { }; static struct intc_group groups[] __initdata = { + INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL), INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9), INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI), INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), @@ -419,14 +428,14 @@ static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups, /* External interrupt pins in IRL mode */ static struct intc_vect vectors_irl[] __initdata = { - INTC_VECT(IRL, 0x200), INTC_VECT(IRL, 0x220), - INTC_VECT(IRL, 0x240), INTC_VECT(IRL, 0x260), - INTC_VECT(IRL, 0x280), INTC_VECT(IRL, 0x2a0), - INTC_VECT(IRL, 0x2c0), INTC_VECT(IRL, 0x2e0), - INTC_VECT(IRL, 0x300), INTC_VECT(IRL, 0x320), - INTC_VECT(IRL, 0x340), INTC_VECT(IRL, 0x360), - INTC_VECT(IRL, 0x380), INTC_VECT(IRL, 0x3a0), - INTC_VECT(IRL, 0x3c0), + INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), + INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), + INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0), + INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0), + INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320), + INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360), + INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0), + INTC_VECT(IRL_HHHL, 0x3c0), }; static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups, diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c index 185ec3976a25..5863e0c4d02f 100644 --- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c @@ -14,6 +14,13 @@ #include <linux/interrupt.h> #include <linux/io.h> +#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12)) +#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12)) + +#define STBCR_MSTP 0x00000001 +#define STBCR_RESET 0x00000002 +#define STBCR_LTSLP 0x80000000 + static irqreturn_t ipi_interrupt_handler(int irq, void *arg) { unsigned int message = (unsigned int)(long)arg; @@ -21,9 +28,9 @@ static irqreturn_t ipi_interrupt_handler(int irq, void *arg) unsigned int offs = 4 * cpu; unsigned int x; - x = ctrl_inl(0xfe410070 + offs); /* C0INITICI..CnINTICI */ + x = __raw_readl(0xfe410070 + offs); /* C0INITICI..CnINTICI */ x &= (1 << (message << 2)); - ctrl_outl(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */ + __raw_writel(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */ smp_message_recv(message); @@ -37,6 +44,9 @@ void __init plat_smp_setup(void) init_cpu_possible(cpumask_of(cpu)); + /* Enable light sleep for the boot CPU */ + __raw_writel(__raw_readl(STBCR_REG(cpu)) | STBCR_LTSLP, STBCR_REG(cpu)); + __cpu_number_map[0] = 0; __cpu_logical_map[0] = 0; @@ -66,32 +76,23 @@ void __init plat_prepare_cpus(unsigned int max_cpus) "IPI", (void *)(long)i); } -#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12)) -#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12)) - -#define STBCR_MSTP 0x00000001 -#define STBCR_RESET 0x00000002 -#define STBCR_LTSLP 0x80000000 - -#define STBCR_AP_VAL (STBCR_RESET | STBCR_LTSLP) - void plat_start_cpu(unsigned int cpu, unsigned long entry_point) { - ctrl_outl(entry_point, RESET_REG(cpu)); + __raw_writel(entry_point, RESET_REG(cpu)); - if (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP)) - ctrl_outl(STBCR_MSTP, STBCR_REG(cpu)); + if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP)) + __raw_writel(STBCR_MSTP, STBCR_REG(cpu)); - while (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP)) + while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP)) cpu_relax(); /* Start up secondary processor by sending a reset */ - ctrl_outl(STBCR_AP_VAL, STBCR_REG(cpu)); + __raw_writel(STBCR_RESET | STBCR_LTSLP, STBCR_REG(cpu)); } int plat_smp_processor_id(void) { - return ctrl_inl(0xff000048); /* CPIDR */ + return __raw_readl(0xff000048); /* CPIDR */ } void plat_send_ipi(unsigned int cpu, unsigned int message) @@ -100,5 +101,5 @@ void plat_send_ipi(unsigned int cpu, unsigned int message) BUG_ON(cpu >= 4); - ctrl_outl(1 << (message << 2), addr); /* C0INTICI..CnINTICI */ + __raw_writel(1 << (message << 2), addr); /* C0INTICI..CnINTICI */ } diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index b0aacf675258..8f13f73cb2cb 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -933,7 +933,7 @@ ret_with_reschedule: pta restore_all, tr1 - movi (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8 + movi _TIF_SIGPENDING, r8 and r8, r7, r8 pta work_notifysig, tr0 bne r8, ZERO, tr0 diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c index 1c504bd972c3..83972aa319c2 100644 --- a/arch/sh/kernel/cpu/shmobile/cpuidle.c +++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c @@ -87,25 +87,31 @@ void sh_mobile_setup_cpuidle(void) dev->safe_state = state; - state = &dev->states[i++]; - snprintf(state->name, CPUIDLE_NAME_LEN, "C1"); - strncpy(state->desc, "SuperH Sleep Mode [SF]", CPUIDLE_DESC_LEN); - state->exit_latency = 100; - state->target_residency = 1 * 2; - state->power_usage = 1; - state->flags = 0; - state->flags |= CPUIDLE_FLAG_TIME_VALID; - state->enter = cpuidle_sleep_enter; + if (sh_mobile_sleep_supported & SUSP_SH_SF) { + state = &dev->states[i++]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C1"); + strncpy(state->desc, "SuperH Sleep Mode [SF]", + CPUIDLE_DESC_LEN); + state->exit_latency = 100; + state->target_residency = 1 * 2; + state->power_usage = 1; + state->flags = 0; + state->flags |= CPUIDLE_FLAG_TIME_VALID; + state->enter = cpuidle_sleep_enter; + } - state = &dev->states[i++]; - snprintf(state->name, CPUIDLE_NAME_LEN, "C2"); - strncpy(state->desc, "SuperH Mobile Standby Mode [SF]", CPUIDLE_DESC_LEN); - state->exit_latency = 2300; - state->target_residency = 1 * 2; - state->power_usage = 1; - state->flags = 0; - state->flags |= CPUIDLE_FLAG_TIME_VALID; - state->enter = cpuidle_sleep_enter; + if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) { + state = &dev->states[i++]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C2"); + strncpy(state->desc, "SuperH Mobile Standby Mode [SF]", + CPUIDLE_DESC_LEN); + state->exit_latency = 2300; + state->target_residency = 1 * 2; + state->power_usage = 1; + state->flags = 0; + state->flags |= CPUIDLE_FLAG_TIME_VALID; + state->enter = cpuidle_sleep_enter; + } dev->state_count = i; diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c index ee3c2aaf66fb..ca029a44743c 100644 --- a/arch/sh/kernel/cpu/shmobile/pm.c +++ b/arch/sh/kernel/cpu/shmobile/pm.c @@ -15,6 +15,13 @@ #include <linux/suspend.h> #include <asm/suspend.h> #include <asm/uaccess.h> +#include <asm/cacheflush.h> + +/* + * Notifier lists for pre/post sleep notification + */ +ATOMIC_NOTIFIER_HEAD(sh_mobile_pre_sleep_notifier_list); +ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list); /* * Sleep modes available on SuperH Mobile: @@ -26,30 +33,105 @@ #define SUSP_MODE_SLEEP (SUSP_SH_SLEEP) #define SUSP_MODE_SLEEP_SF (SUSP_SH_SLEEP | SUSP_SH_SF) #define SUSP_MODE_STANDBY_SF (SUSP_SH_STANDBY | SUSP_SH_SF) +#define SUSP_MODE_RSTANDBY (SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_SF) + /* + * U-standby mode is unsupported since it needs bootloader hacks + */ -/* - * The following modes are not there yet: - * - * R-standby mode is unsupported, but will be added in the future - * U-standby mode is low priority since it needs bootloader hacks - */ - -#define ILRAM_BASE 0xe5200000 - -extern const unsigned char sh_mobile_standby[]; -extern const unsigned int sh_mobile_standby_size; +#ifdef CONFIG_CPU_SUBTYPE_SH7724 +#define RAM_BASE 0xfd800000 /* RSMEM */ +#else +#define RAM_BASE 0xe5200000 /* ILRAM */ +#endif void sh_mobile_call_standby(unsigned long mode) { - void *onchip_mem = (void *)ILRAM_BASE; - void (*standby_onchip_mem)(unsigned long, unsigned long) = onchip_mem; + void *onchip_mem = (void *)RAM_BASE; + struct sh_sleep_data *sdp = onchip_mem; + void (*standby_onchip_mem)(unsigned long, unsigned long); + + /* code located directly after data structure */ + standby_onchip_mem = (void *)(sdp + 1); + + atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list, + mode, NULL); + + /* flush the caches if MMU flag is set */ + if (mode & SUSP_SH_MMU) + flush_cache_all(); /* Let assembly snippet in on-chip memory handle the rest */ - standby_onchip_mem(mode, ILRAM_BASE); + standby_onchip_mem(mode, RAM_BASE); + + atomic_notifier_call_chain(&sh_mobile_post_sleep_notifier_list, + mode, NULL); +} + +extern char sh_mobile_sleep_enter_start; +extern char sh_mobile_sleep_enter_end; + +extern char sh_mobile_sleep_resume_start; +extern char sh_mobile_sleep_resume_end; + +unsigned long sh_mobile_sleep_supported = SUSP_SH_SLEEP; + +void sh_mobile_register_self_refresh(unsigned long flags, + void *pre_start, void *pre_end, + void *post_start, void *post_end) +{ + void *onchip_mem = (void *)RAM_BASE; + void *vp; + struct sh_sleep_data *sdp; + int n; + + /* part 0: data area */ + sdp = onchip_mem; + sdp->addr.stbcr = 0xa4150020; /* STBCR */ + sdp->addr.bar = 0xa4150040; /* BAR */ + sdp->addr.pteh = 0xff000000; /* PTEH */ + sdp->addr.ptel = 0xff000004; /* PTEL */ + sdp->addr.ttb = 0xff000008; /* TTB */ + sdp->addr.tea = 0xff00000c; /* TEA */ + sdp->addr.mmucr = 0xff000010; /* MMUCR */ + sdp->addr.ptea = 0xff000034; /* PTEA */ + sdp->addr.pascr = 0xff000070; /* PASCR */ + sdp->addr.irmcr = 0xff000078; /* IRMCR */ + sdp->addr.ccr = 0xff00001c; /* CCR */ + sdp->addr.ramcr = 0xff000074; /* RAMCR */ + vp = sdp + 1; + + /* part 1: common code to enter sleep mode */ + n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start; + memcpy(vp, &sh_mobile_sleep_enter_start, n); + vp += roundup(n, 4); + + /* part 2: board specific code to enter self-refresh mode */ + n = pre_end - pre_start; + memcpy(vp, pre_start, n); + sdp->sf_pre = (unsigned long)vp; + vp += roundup(n, 4); + + /* part 3: board specific code to resume from self-refresh mode */ + n = post_end - post_start; + memcpy(vp, post_start, n); + sdp->sf_post = (unsigned long)vp; + vp += roundup(n, 4); + + /* part 4: common code to resume from sleep mode */ + WARN_ON(vp > (onchip_mem + 0x600)); + vp = onchip_mem + 0x600; /* located at interrupt vector */ + n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start; + memcpy(vp, &sh_mobile_sleep_resume_start, n); + sdp->resume = (unsigned long)vp; + + sh_mobile_sleep_supported |= flags; } static int sh_pm_enter(suspend_state_t state) { + if (!(sh_mobile_sleep_supported & SUSP_MODE_STANDBY_SF)) + return -ENXIO; + local_irq_disable(); set_bl_bit(); sh_mobile_call_standby(SUSP_MODE_STANDBY_SF); @@ -65,13 +147,6 @@ static struct platform_suspend_ops sh_pm_ops = { static int __init sh_pm_init(void) { - void *onchip_mem = (void *)ILRAM_BASE; - - /* Copy the assembly snippet to the otherwise ununsed ILRAM */ - memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size); - wmb(); - ctrl_barrier(); - suspend_set_ops(&sh_pm_ops); sh_mobile_setup_cpuidle(); return 0; diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c index 7c615b17e209..6dcb8166a64d 100644 --- a/arch/sh/kernel/cpu/shmobile/pm_runtime.c +++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c @@ -45,12 +45,14 @@ static int __platform_pm_runtime_resume(struct platform_device *pdev) dev_dbg(d, "__platform_pm_runtime_resume() [%d]\n", hwblk); - if (d->driver && d->driver->pm && d->driver->pm->runtime_resume) { + if (d->driver) { hwblk_enable(hwblk_info, hwblk); ret = 0; if (test_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags)) { - ret = d->driver->pm->runtime_resume(d); + if (d->driver->pm && d->driver->pm->runtime_resume) + ret = d->driver->pm->runtime_resume(d); + if (!ret) clear_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags); else @@ -73,12 +75,15 @@ static int __platform_pm_runtime_suspend(struct platform_device *pdev) dev_dbg(d, "__platform_pm_runtime_suspend() [%d]\n", hwblk); - if (d->driver && d->driver->pm && d->driver->pm->runtime_suspend) { + if (d->driver) { BUG_ON(!test_bit(PDEV_ARCHDATA_FLAG_IDLE, &ad->flags)); + ret = 0; - hwblk_enable(hwblk_info, hwblk); - ret = d->driver->pm->runtime_suspend(d); - hwblk_disable(hwblk_info, hwblk); + if (d->driver->pm && d->driver->pm->runtime_suspend) { + hwblk_enable(hwblk_info, hwblk); + ret = d->driver->pm->runtime_suspend(d); + hwblk_disable(hwblk_info, hwblk); + } if (!ret) { set_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags); diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S index a439e6c7824f..e9dd7fa0abd2 100644 --- a/arch/sh/kernel/cpu/shmobile/sleep.S +++ b/arch/sh/kernel/cpu/shmobile/sleep.S @@ -20,79 +20,103 @@ * Kernel mode register usage, see entry.S: * k0 scratch * k1 scratch - * k4 scratch */ #define k0 r0 #define k1 r1 -#define k4 r4 -/* manage self-refresh and enter standby mode. +/* manage self-refresh and enter standby mode. must be self-contained. * this code will be copied to on-chip memory and executed from there. */ + .balign 4 +ENTRY(sh_mobile_sleep_enter_start) - .balign 4096,0,4096 -ENTRY(sh_mobile_standby) + /* save mode flags */ + mov.l r4, @(SH_SLEEP_MODE, r5) /* save original vbr */ - stc vbr, r1 - mova saved_vbr, r0 - mov.l r1, @r0 + stc vbr, r0 + mov.l r0, @(SH_SLEEP_VBR, r5) /* point vbr to our on-chip memory page */ ldc r5, vbr /* save return address */ - mova saved_spc, r0 - sts pr, r5 - mov.l r5, @r0 + sts pr, r0 + mov.l r0, @(SH_SLEEP_SPC, r5) /* save sr */ - mova saved_sr, r0 - stc sr, r5 - mov.l r5, @r0 + stc sr, r0 + mov.l r0, @(SH_SLEEP_SR, r5) - /* save mode flags */ - mova saved_mode, r0 - mov.l r4, @r0 + /* save sp */ + mov.l r15, @(SH_SLEEP_SP, r5) + + /* save stbcr */ + bsr save_register + mov #SH_SLEEP_REG_STBCR, r0 + + /* save mmu and cache context if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_MMU, r0 + bt skip_mmu_save_disable + + /* save mmu state */ + bsr save_register + mov #SH_SLEEP_REG_PTEH, r0 + + bsr save_register + mov #SH_SLEEP_REG_PTEL, r0 + + bsr save_register + mov #SH_SLEEP_REG_TTB, r0 + + bsr save_register + mov #SH_SLEEP_REG_TEA, r0 + + bsr save_register + mov #SH_SLEEP_REG_MMUCR, r0 + + bsr save_register + mov #SH_SLEEP_REG_PTEA, r0 + + bsr save_register + mov #SH_SLEEP_REG_PASCR, r0 - /* put mode flags in r0 */ - mov r4, r0 + bsr save_register + mov #SH_SLEEP_REG_IRMCR, r0 + /* invalidate TLBs and disable the MMU */ + bsr get_register + mov #SH_SLEEP_REG_MMUCR, r0 + mov #4, r1 + mov.l r1, @r0 + icbi @r0 + + /* save cache registers and disable caches */ + bsr save_register + mov #SH_SLEEP_REG_CCR, r0 + + bsr save_register + mov #SH_SLEEP_REG_RAMCR, r0 + + bsr get_register + mov #SH_SLEEP_REG_CCR, r0 + mov #0, r1 + mov.l r1, @r0 + icbi @r0 + +skip_mmu_save_disable: + /* call self-refresh entering code if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 tst #SUSP_SH_SF, r0 bt skip_set_sf -#ifdef CONFIG_CPU_SUBTYPE_SH7724 - /* DBSC: put memory in self-refresh mode */ - mov.l dben_reg, r4 - mov.l dben_data0, r1 - mov.l r1, @r4 - - mov.l dbrfpdn0_reg, r4 - mov.l dbrfpdn0_data0, r1 - mov.l r1, @r4 - - mov.l dbcmdcnt_reg, r4 - mov.l dbcmdcnt_data0, r1 - mov.l r1, @r4 - - mov.l dbcmdcnt_reg, r4 - mov.l dbcmdcnt_data1, r1 - mov.l r1, @r4 - - mov.l dbrfpdn0_reg, r4 - mov.l dbrfpdn0_data1, r1 - mov.l r1, @r4 -#else - /* SBSC: disable power down and put in self-refresh mode */ - mov.l 1f, r4 - mov.l 2f, r1 - mov.l @r4, r2 - or r1, r2 - mov.l 3f, r3 - and r3, r2 - mov.l r2, @r4 -#endif + + mov.l @(SH_SLEEP_SF_PRE, r5), r0 + jsr @r0 + nop skip_set_sf: + mov.l @(SH_SLEEP_MODE, r5), r0 tst #SUSP_SH_STANDBY, r0 bt test_rstandby @@ -104,6 +128,12 @@ test_rstandby: tst #SUSP_SH_RSTANDBY, r0 bt test_ustandby + /* setup BAR register */ + bsr get_register + mov #SH_SLEEP_REG_BAR, r0 + mov.l @(SH_SLEEP_RESUME, r5), r1 + mov.l r1, @r0 + /* set mode to "r-standby mode" */ bra do_sleep mov #0x20, r1 @@ -123,124 +153,136 @@ force_sleep: do_sleep: /* setup and enter selected standby mode */ - mov.l 5f, r4 - mov.l r1, @r4 + bsr get_register + mov #SH_SLEEP_REG_STBCR, r0 + mov.l r1, @r0 again: sleep bra again nop -restore_jump_vbr: +save_register: + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r1 + add #-SH_SLEEP_BASE_ADDR, r0 + mov.l @r1, r1 + add #SH_SLEEP_BASE_DATA, r0 + mov.l r1, @(r0, r5) + add #-SH_SLEEP_BASE_DATA, r0 + rts + nop + +get_register: + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r0 + rts + nop +ENTRY(sh_mobile_sleep_enter_end) + + .balign 4 +ENTRY(sh_mobile_sleep_resume_start) + + /* figure out start address */ + bsr 0f + nop +0: + sts pr, k1 + mov.l 1f, k0 + and k0, k1 + + /* store pointer to data area in VBR */ + ldc k1, vbr + + /* setup sr with saved sr */ + mov.l @(SH_SLEEP_SR, k1), k0 + ldc k0, sr + + /* now: user register set! */ + stc vbr, r5 + /* setup spc with return address to c code */ - mov.l saved_spc, k0 - ldc k0, spc + mov.l @(SH_SLEEP_SPC, r5), r0 + ldc r0, spc /* restore vbr */ - mov.l saved_vbr, k0 - ldc k0, vbr + mov.l @(SH_SLEEP_VBR, r5), r0 + ldc r0, vbr /* setup ssr with saved sr */ - mov.l saved_sr, k0 - ldc k0, ssr + mov.l @(SH_SLEEP_SR, r5), r0 + ldc r0, ssr - /* get mode flags */ - mov.l saved_mode, k0 + /* restore sp */ + mov.l @(SH_SLEEP_SP, r5), r15 -done_sleep: - /* reset standby mode to sleep mode */ - mov.l 5f, k4 - mov #0x00, k1 - mov.l k1, @k4 + /* restore sleep mode register */ + bsr restore_register + mov #SH_SLEEP_REG_STBCR, r0 - tst #SUSP_SH_SF, k0 + /* call self-refresh resume code if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_SF, r0 bt skip_restore_sf -#ifdef CONFIG_CPU_SUBTYPE_SH7724 - /* DBSC: put memory in auto-refresh mode */ - mov.l dbrfpdn0_reg, k4 - mov.l dbrfpdn0_data0, k1 - mov.l k1, @k4 - - nop /* sleep 140 ns */ - nop - nop - nop - - mov.l dbcmdcnt_reg, k4 - mov.l dbcmdcnt_data0, k1 - mov.l k1, @k4 - - mov.l dbcmdcnt_reg, k4 - mov.l dbcmdcnt_data1, k1 - mov.l k1, @k4 - - mov.l dben_reg, k4 - mov.l dben_data1, k1 - mov.l k1, @k4 - - mov.l dbrfpdn0_reg, k4 - mov.l dbrfpdn0_data2, k1 - mov.l k1, @k4 -#else - /* SBSC: set auto-refresh mode */ - mov.l 1f, k4 - mov.l @k4, k0 - mov.l 4f, k1 - and k1, k0 - mov.l k0, @k4 - mov.l 6f, k4 - mov.l 8f, k0 - mov.l @k4, k1 - mov #-1, k4 - add k4, k1 - or k1, k0 - mov.l 7f, k1 - mov.l k0, @k1 -#endif + mov.l @(SH_SLEEP_SF_POST, r5), r0 + jsr @r0 + nop + skip_restore_sf: - /* jump to vbr vector */ - mov.l saved_vbr, k0 - mov.l offset_vbr, k4 - add k4, k0 - jmp @k0 + /* restore mmu and cache state if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_MMU, r0 + bt skip_restore_mmu + + /* restore mmu state */ + bsr restore_register + mov #SH_SLEEP_REG_PTEH, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PTEL, r0 + + bsr restore_register + mov #SH_SLEEP_REG_TTB, r0 + + bsr restore_register + mov #SH_SLEEP_REG_TEA, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PTEA, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PASCR, r0 + + bsr restore_register + mov #SH_SLEEP_REG_IRMCR, r0 + + bsr restore_register + mov #SH_SLEEP_REG_MMUCR, r0 + icbi @r0 + + /* restore cache settings */ + bsr restore_register + mov #SH_SLEEP_REG_RAMCR, r0 + icbi @r0 + + bsr restore_register + mov #SH_SLEEP_REG_CCR, r0 + icbi @r0 + +skip_restore_mmu: + rte nop - .balign 4 -saved_mode: .long 0 -saved_spc: .long 0 -saved_sr: .long 0 -saved_vbr: .long 0 -offset_vbr: .long 0x600 -#ifdef CONFIG_CPU_SUBTYPE_SH7724 -dben_reg: .long 0xfd000010 /* DBEN */ -dben_data0: .long 0 -dben_data1: .long 1 -dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */ -dbrfpdn0_data0: .long 0 -dbrfpdn0_data1: .long 1 -dbrfpdn0_data2: .long 0x00010000 -dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */ -dbcmdcnt_data0: .long 2 -dbcmdcnt_data1: .long 4 -#else -1: .long 0xfe400008 /* SDCR0 */ -2: .long 0x00000400 -3: .long 0xffff7fff -4: .long 0xfffffbff -#endif -5: .long 0xa4150020 /* STBCR */ -6: .long 0xfe40001c /* RTCOR */ -7: .long 0xfe400018 /* RTCNT */ -8: .long 0xa55a0000 - - -/* interrupt vector @ 0x600 */ - .balign 0x400,0,0x400 - .long 0xdeadbeef - .balign 0x200,0,0x200 - bra restore_jump_vbr +restore_register: + add #SH_SLEEP_BASE_DATA, r0 + mov.l @(r0, r5), r1 + add #-SH_SLEEP_BASE_DATA, r0 + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r0 + mov.l r1, @r0 + rts nop -sh_mobile_standby_end: -ENTRY(sh_mobile_standby_size) - .long sh_mobile_standby_end - sh_mobile_standby + .balign 4 +1: .long ~0x7ff +ENTRY(sh_mobile_sleep_resume_end) diff --git a/arch/sh/kernel/cpu/ubc.S b/arch/sh/kernel/cpu/ubc.S deleted file mode 100644 index 81923079fa12..000000000000 --- a/arch/sh/kernel/cpu/ubc.S +++ /dev/null @@ -1,59 +0,0 @@ -/* - * arch/sh/kernel/cpu/ubc.S - * - * Set of management routines for the User Break Controller (UBC) - * - * Copyright (C) 2002 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/linkage.h> -#include <asm/ubc.h> - -#define STBCR2 0xffc00010 - -ENTRY(ubc_sleep) - mov #0, r0 - - mov.l 1f, r1 ! Zero out UBC_BBRA .. - mov.w r0, @r1 - - mov.l 2f, r1 ! .. same for BBRB .. - mov.w r0, @r1 - - mov.l 3f, r1 ! .. and again for BRCR. - mov.w r0, @r1 - - mov.w @r1, r0 ! Dummy read BRCR - - mov.l 4f, r1 ! Set MSTP5 in STBCR2 - mov.b @r1, r0 - or #0x01, r0 - mov.b r0, @r1 - - mov.b @r1, r0 ! Two dummy reads .. - mov.b @r1, r0 - - rts - nop - -ENTRY(ubc_wakeup) - mov.l 4f, r1 ! Clear MSTP5 - mov.b @r1, r0 - and #0xfe, r0 - mov.b r0, @r1 - - mov.b @r1, r0 ! Two more dummy reads .. - mov.b @r1, r0 - - rts - nop - -1: .long UBC_BBRA -2: .long UBC_BBRB -3: .long UBC_BRCR -4: .long STBCR2 - diff --git a/arch/sh/kernel/dma-nommu.c b/arch/sh/kernel/dma-nommu.c new file mode 100644 index 000000000000..3c55b87f8b63 --- /dev/null +++ b/arch/sh/kernel/dma-nommu.c @@ -0,0 +1,82 @@ +/* + * DMA mapping support for platforms lacking IOMMUs. + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/dma-mapping.h> +#include <linux/io.h> + +static dma_addr_t nommu_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + dma_addr_t addr = page_to_phys(page) + offset; + + WARN_ON(size == 0); + dma_cache_sync(dev, page_address(page) + offset, size, dir); + + return addr; +} + +static int nommu_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct scatterlist *s; + int i; + + WARN_ON(nents == 0 || sg[0].length == 0); + + for_each_sg(sg, s, nents, i) { + BUG_ON(!sg_page(s)); + + dma_cache_sync(dev, sg_virt(s), s->length, dir); + + s->dma_address = sg_phys(s); + s->dma_length = s->length; + } + + return nents; +} + +#ifdef CONFIG_DMA_NONCOHERENT +static void nommu_sync_single(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir) +{ + dma_cache_sync(dev, phys_to_virt(addr), size, dir); +} + +static void nommu_sync_sg(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction dir) +{ + struct scatterlist *s; + int i; + + for_each_sg(sg, s, nelems, i) + dma_cache_sync(dev, sg_virt(s), s->length, dir); +} +#endif + +struct dma_map_ops nommu_dma_ops = { + .alloc_coherent = dma_generic_alloc_coherent, + .free_coherent = dma_generic_free_coherent, + .map_page = nommu_map_page, + .map_sg = nommu_map_sg, +#ifdef CONFIG_DMA_NONCOHERENT + .sync_single_for_device = nommu_sync_single, + .sync_sg_for_device = nommu_sync_sg, +#endif + .is_phys = 1, +}; + +void __init no_iommu_init(void) +{ + if (dma_ops) + return; + dma_ops = &nommu_dma_ops; +} diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index d76a23170dbb..3576b709f052 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -20,6 +20,7 @@ #include <linux/list.h> #include <linux/mempool.h> #include <linux/mm.h> +#include <linux/elf.h> #include <linux/ftrace.h> #include <asm/dwarf.h> #include <asm/unwinder.h> @@ -530,7 +531,18 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start, } /** - * dwarf_unwind_stack - recursively unwind the stack + * dwarf_free_frame - free the memory allocated for @frame + * @frame: the frame to free + */ +void dwarf_free_frame(struct dwarf_frame *frame) +{ + dwarf_frame_free_regs(frame); + mempool_free(frame, dwarf_frame_pool); +} + +/** + * dwarf_unwind_stack - unwind the stack + * * @pc: address of the function to unwind * @prev: struct dwarf_frame of the previous stackframe on the callstack * @@ -548,9 +560,9 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, unsigned long addr; /* - * If this is the first invocation of this recursive function we - * need get the contents of a physical register to get the CFA - * in order to begin the virtual unwinding of the stack. + * If we're starting at the top of the stack we need get the + * contents of a physical register to get the CFA in order to + * begin the virtual unwinding of the stack. * * NOTE: the return address is guaranteed to be setup by the * time this function makes its first function call. @@ -593,9 +605,8 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, fde = dwarf_lookup_fde(pc); if (!fde) { /* - * This is our normal exit path - the one that stops the - * recursion. There's two reasons why we might exit - * here, + * This is our normal exit path. There are two reasons + * why we might exit here, * * a) pc has no asscociated DWARF frame info and so * we don't know how to unwind this frame. This is @@ -637,10 +648,10 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, } else { /* - * Again, this is the first invocation of this - * recurisve function. We need to physically - * read the contents of a register in order to - * get the Canonical Frame Address for this + * Again, we're starting from the top of the + * stack. We need to physically read + * the contents of a register in order to get + * the Canonical Frame Address for this * function. */ frame->cfa = dwarf_read_arch_reg(frame->cfa_register); @@ -670,13 +681,12 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, return frame; bail: - dwarf_frame_free_regs(frame); - mempool_free(frame, dwarf_frame_pool); + dwarf_free_frame(frame); return NULL; } static int dwarf_parse_cie(void *entry, void *p, unsigned long len, - unsigned char *end) + unsigned char *end, struct module *mod) { struct dwarf_cie *cie; unsigned long flags; @@ -772,6 +782,8 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len, cie->initial_instructions = p; cie->instructions_end = end; + cie->mod = mod; + /* Add to list */ spin_lock_irqsave(&dwarf_cie_lock, flags); list_add_tail(&cie->link, &dwarf_cie_list); @@ -782,7 +794,7 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len, static int dwarf_parse_fde(void *entry, u32 entry_type, void *start, unsigned long len, - unsigned char *end) + unsigned char *end, struct module *mod) { struct dwarf_fde *fde; struct dwarf_cie *cie; @@ -831,6 +843,8 @@ static int dwarf_parse_fde(void *entry, u32 entry_type, fde->instructions = p; fde->end = end; + fde->mod = mod; + /* Add to list. */ spin_lock_irqsave(&dwarf_fde_lock, flags); list_add_tail(&fde->link, &dwarf_fde_list); @@ -854,10 +868,8 @@ static void dwarf_unwinder_dump(struct task_struct *task, while (1) { frame = dwarf_unwind_stack(return_addr, _frame); - if (_frame) { - dwarf_frame_free_regs(_frame); - mempool_free(_frame, dwarf_frame_pool); - } + if (_frame) + dwarf_free_frame(_frame); _frame = frame; @@ -867,6 +879,9 @@ static void dwarf_unwinder_dump(struct task_struct *task, return_addr = frame->return_addr; ops->address(data, return_addr, 1); } + + if (frame) + dwarf_free_frame(frame); } static struct unwinder dwarf_unwinder = { @@ -896,48 +911,28 @@ static void dwarf_unwinder_cleanup(void) } /** - * dwarf_unwinder_init - initialise the dwarf unwinder + * dwarf_parse_section - parse DWARF section + * @eh_frame_start: start address of the .eh_frame section + * @eh_frame_end: end address of the .eh_frame section + * @mod: the kernel module containing the .eh_frame section * - * Build the data structures describing the .dwarf_frame section to - * make it easier to lookup CIE and FDE entries. Because the - * .eh_frame section is packed as tightly as possible it is not - * easy to lookup the FDE for a given PC, so we build a list of FDE - * and CIE entries that make it easier. + * Parse the information in a .eh_frame section. */ -static int __init dwarf_unwinder_init(void) +static int dwarf_parse_section(char *eh_frame_start, char *eh_frame_end, + struct module *mod) { u32 entry_type; void *p, *entry; int count, err = 0; - unsigned long len; + unsigned long len = 0; unsigned int c_entries, f_entries; unsigned char *end; - INIT_LIST_HEAD(&dwarf_cie_list); - INIT_LIST_HEAD(&dwarf_fde_list); c_entries = 0; f_entries = 0; - entry = &__start_eh_frame; - - dwarf_frame_cachep = kmem_cache_create("dwarf_frames", - sizeof(struct dwarf_frame), 0, - SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL); - - dwarf_reg_cachep = kmem_cache_create("dwarf_regs", - sizeof(struct dwarf_reg), 0, - SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL); + entry = eh_frame_start; - dwarf_frame_pool = mempool_create(DWARF_FRAME_MIN_REQ, - mempool_alloc_slab, - mempool_free_slab, - dwarf_frame_cachep); - - dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ, - mempool_alloc_slab, - mempool_free_slab, - dwarf_reg_cachep); - - while ((char *)entry < __stop_eh_frame) { + while ((char *)entry < eh_frame_end) { p = entry; count = dwarf_entry_len(p, &len); @@ -949,6 +944,7 @@ static int __init dwarf_unwinder_init(void) * entry and move to the next one because 'len' * tells us where our next entry is. */ + err = -EINVAL; goto out; } else p += count; @@ -960,13 +956,14 @@ static int __init dwarf_unwinder_init(void) p += 4; if (entry_type == DW_EH_FRAME_CIE) { - err = dwarf_parse_cie(entry, p, len, end); + err = dwarf_parse_cie(entry, p, len, end, mod); if (err < 0) goto out; else c_entries++; } else { - err = dwarf_parse_fde(entry, entry_type, p, len, end); + err = dwarf_parse_fde(entry, entry_type, p, len, + end, mod); if (err < 0) goto out; else @@ -979,6 +976,129 @@ static int __init dwarf_unwinder_init(void) printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n", c_entries, f_entries); + return 0; + +out: + return err; +} + +#ifdef CONFIG_MODULES +int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, + struct module *me) +{ + unsigned int i, err; + unsigned long start, end; + char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + start = end = 0; + + for (i = 1; i < hdr->e_shnum; i++) { + /* Alloc bit cleared means "ignore it." */ + if ((sechdrs[i].sh_flags & SHF_ALLOC) + && !strcmp(secstrings+sechdrs[i].sh_name, ".eh_frame")) { + start = sechdrs[i].sh_addr; + end = start + sechdrs[i].sh_size; + break; + } + } + + /* Did we find the .eh_frame section? */ + if (i != hdr->e_shnum) { + err = dwarf_parse_section((char *)start, (char *)end, me); + if (err) { + printk(KERN_WARNING "%s: failed to parse DWARF info\n", + me->name); + return err; + } + } + + return 0; +} + +/** + * module_dwarf_cleanup - remove FDE/CIEs associated with @mod + * @mod: the module that is being unloaded + * + * Remove any FDEs and CIEs from the global lists that came from + * @mod's .eh_frame section because @mod is being unloaded. + */ +void module_dwarf_cleanup(struct module *mod) +{ + struct dwarf_fde *fde; + struct dwarf_cie *cie; + unsigned long flags; + + spin_lock_irqsave(&dwarf_cie_lock, flags); + +again_cie: + list_for_each_entry(cie, &dwarf_cie_list, link) { + if (cie->mod == mod) + break; + } + + if (&cie->link != &dwarf_cie_list) { + list_del(&cie->link); + kfree(cie); + goto again_cie; + } + + spin_unlock_irqrestore(&dwarf_cie_lock, flags); + + spin_lock_irqsave(&dwarf_fde_lock, flags); + +again_fde: + list_for_each_entry(fde, &dwarf_fde_list, link) { + if (fde->mod == mod) + break; + } + + if (&fde->link != &dwarf_fde_list) { + list_del(&fde->link); + kfree(fde); + goto again_fde; + } + + spin_unlock_irqrestore(&dwarf_fde_lock, flags); +} +#endif /* CONFIG_MODULES */ + +/** + * dwarf_unwinder_init - initialise the dwarf unwinder + * + * Build the data structures describing the .dwarf_frame section to + * make it easier to lookup CIE and FDE entries. Because the + * .eh_frame section is packed as tightly as possible it is not + * easy to lookup the FDE for a given PC, so we build a list of FDE + * and CIE entries that make it easier. + */ +static int __init dwarf_unwinder_init(void) +{ + int err; + INIT_LIST_HEAD(&dwarf_cie_list); + INIT_LIST_HEAD(&dwarf_fde_list); + + dwarf_frame_cachep = kmem_cache_create("dwarf_frames", + sizeof(struct dwarf_frame), 0, + SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL); + + dwarf_reg_cachep = kmem_cache_create("dwarf_regs", + sizeof(struct dwarf_reg), 0, + SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL); + + dwarf_frame_pool = mempool_create(DWARF_FRAME_MIN_REQ, + mempool_alloc_slab, + mempool_free_slab, + dwarf_frame_cachep); + + dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ, + mempool_alloc_slab, + mempool_free_slab, + dwarf_reg_cachep); + + err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL); + if (err) + goto out; + err = unwinder_register(&dwarf_unwinder); if (err) goto out; diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 3eb84931d2aa..f0abd58c3a69 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -133,7 +133,7 @@ work_pending: ! r8: current_thread_info ! t: result of "tst #_TIF_NEED_RESCHED, r0" bf/s work_resched - tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0 + tst #_TIF_SIGPENDING, r0 work_notifysig: bt/s __restore_all mov r15, r4 diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c index 2c48e267256e..b6f41c109beb 100644 --- a/arch/sh/kernel/ftrace.c +++ b/arch/sh/kernel/ftrace.c @@ -62,6 +62,150 @@ static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) return ftrace_replaced_code; } +/* + * Modifying code must take extra care. On an SMP machine, if + * the code being modified is also being executed on another CPU + * that CPU will have undefined results and possibly take a GPF. + * We use kstop_machine to stop other CPUS from exectuing code. + * But this does not stop NMIs from happening. We still need + * to protect against that. We separate out the modification of + * the code to take care of this. + * + * Two buffers are added: An IP buffer and a "code" buffer. + * + * 1) Put the instruction pointer into the IP buffer + * and the new code into the "code" buffer. + * 2) Wait for any running NMIs to finish and set a flag that says + * we are modifying code, it is done in an atomic operation. + * 3) Write the code + * 4) clear the flag. + * 5) Wait for any running NMIs to finish. + * + * If an NMI is executed, the first thing it does is to call + * "ftrace_nmi_enter". This will check if the flag is set to write + * and if it is, it will write what is in the IP and "code" buffers. + * + * The trick is, it does not matter if everyone is writing the same + * content to the code location. Also, if a CPU is executing code + * it is OK to write to that code location if the contents being written + * are the same as what exists. + */ +#define MOD_CODE_WRITE_FLAG (1 << 31) /* set when NMI should do the write */ +static atomic_t nmi_running = ATOMIC_INIT(0); +static int mod_code_status; /* holds return value of text write */ +static void *mod_code_ip; /* holds the IP to write to */ +static void *mod_code_newcode; /* holds the text to write to the IP */ + +static unsigned nmi_wait_count; +static atomic_t nmi_update_count = ATOMIC_INIT(0); + +int ftrace_arch_read_dyn_info(char *buf, int size) +{ + int r; + + r = snprintf(buf, size, "%u %u", + nmi_wait_count, + atomic_read(&nmi_update_count)); + return r; +} + +static void clear_mod_flag(void) +{ + int old = atomic_read(&nmi_running); + + for (;;) { + int new = old & ~MOD_CODE_WRITE_FLAG; + + if (old == new) + break; + + old = atomic_cmpxchg(&nmi_running, old, new); + } +} + +static void ftrace_mod_code(void) +{ + /* + * Yes, more than one CPU process can be writing to mod_code_status. + * (and the code itself) + * But if one were to fail, then they all should, and if one were + * to succeed, then they all should. + */ + mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode, + MCOUNT_INSN_SIZE); + + /* if we fail, then kill any new writers */ + if (mod_code_status) + clear_mod_flag(); +} + +void ftrace_nmi_enter(void) +{ + if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) { + smp_rmb(); + ftrace_mod_code(); + atomic_inc(&nmi_update_count); + } + /* Must have previous changes seen before executions */ + smp_mb(); +} + +void ftrace_nmi_exit(void) +{ + /* Finish all executions before clearing nmi_running */ + smp_mb(); + atomic_dec(&nmi_running); +} + +static void wait_for_nmi_and_set_mod_flag(void) +{ + if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG)) + return; + + do { + cpu_relax(); + } while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG)); + + nmi_wait_count++; +} + +static void wait_for_nmi(void) +{ + if (!atomic_read(&nmi_running)) + return; + + do { + cpu_relax(); + } while (atomic_read(&nmi_running)); + + nmi_wait_count++; +} + +static int +do_ftrace_mod_code(unsigned long ip, void *new_code) +{ + mod_code_ip = (void *)ip; + mod_code_newcode = new_code; + + /* The buffers need to be visible before we let NMIs write them */ + smp_mb(); + + wait_for_nmi_and_set_mod_flag(); + + /* Make sure all running NMIs have finished before we write the code */ + smp_mb(); + + ftrace_mod_code(); + + /* Make sure the write happens before clearing the bit */ + smp_mb(); + + clear_mod_flag(); + wait_for_nmi(); + + return mod_code_status; +} + static int ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char *new_code) { @@ -86,7 +230,7 @@ static int ftrace_modify_code(unsigned long ip, unsigned char *old_code, return -EINVAL; /* replace the text with the new text */ - if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE)) + if (do_ftrace_mod_code(ip, new_code)) return -EPERM; flush_icache_range(ip, ip + MCOUNT_INSN_SIZE); diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c deleted file mode 100644 index d22e5af699f9..000000000000 --- a/arch/sh/kernel/gpio.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - * Pinmuxed GPIO support for SuperH. - * - * Copyright (C) 2008 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/bitops.h> -#include <linux/gpio.h> - -static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r) -{ - if (enum_id < r->begin) - return 0; - - if (enum_id > r->end) - return 0; - - return 1; -} - -static unsigned long gpio_read_raw_reg(unsigned long reg, - unsigned long reg_width) -{ - switch (reg_width) { - case 8: - return ctrl_inb(reg); - case 16: - return ctrl_inw(reg); - case 32: - return ctrl_inl(reg); - } - - BUG(); - return 0; -} - -static void gpio_write_raw_reg(unsigned long reg, - unsigned long reg_width, - unsigned long data) -{ - switch (reg_width) { - case 8: - ctrl_outb(data, reg); - return; - case 16: - ctrl_outw(data, reg); - return; - case 32: - ctrl_outl(data, reg); - return; - } - - BUG(); -} - -static void gpio_write_bit(struct pinmux_data_reg *dr, - unsigned long in_pos, unsigned long value) -{ - unsigned long pos; - - pos = dr->reg_width - (in_pos + 1); - -#ifdef DEBUG - pr_info("write_bit addr = %lx, value = %ld, pos = %ld, " - "r_width = %ld\n", - dr->reg, !!value, pos, dr->reg_width); -#endif - - if (value) - set_bit(pos, &dr->reg_shadow); - else - clear_bit(pos, &dr->reg_shadow); - - gpio_write_raw_reg(dr->reg, dr->reg_width, dr->reg_shadow); -} - -static int gpio_read_reg(unsigned long reg, unsigned long reg_width, - unsigned long field_width, unsigned long in_pos) -{ - unsigned long data, mask, pos; - - data = 0; - mask = (1 << field_width) - 1; - pos = reg_width - ((in_pos + 1) * field_width); - -#ifdef DEBUG - pr_info("read_reg: addr = %lx, pos = %ld, " - "r_width = %ld, f_width = %ld\n", - reg, pos, reg_width, field_width); -#endif - - data = gpio_read_raw_reg(reg, reg_width); - return (data >> pos) & mask; -} - -static void gpio_write_reg(unsigned long reg, unsigned long reg_width, - unsigned long field_width, unsigned long in_pos, - unsigned long value) -{ - unsigned long mask, pos; - - mask = (1 << field_width) - 1; - pos = reg_width - ((in_pos + 1) * field_width); - -#ifdef DEBUG - pr_info("write_reg addr = %lx, value = %ld, pos = %ld, " - "r_width = %ld, f_width = %ld\n", - reg, value, pos, reg_width, field_width); -#endif - - mask = ~(mask << pos); - value = value << pos; - - switch (reg_width) { - case 8: - ctrl_outb((ctrl_inb(reg) & mask) | value, reg); - break; - case 16: - ctrl_outw((ctrl_inw(reg) & mask) | value, reg); - break; - case 32: - ctrl_outl((ctrl_inl(reg) & mask) | value, reg); - break; - } -} - -static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio) -{ - struct pinmux_gpio *gpiop = &gpioc->gpios[gpio]; - struct pinmux_data_reg *data_reg; - int k, n; - - if (!enum_in_range(gpiop->enum_id, &gpioc->data)) - return -1; - - k = 0; - while (1) { - data_reg = gpioc->data_regs + k; - - if (!data_reg->reg_width) - break; - - for (n = 0; n < data_reg->reg_width; n++) { - if (data_reg->enum_ids[n] == gpiop->enum_id) { - gpiop->flags &= ~PINMUX_FLAG_DREG; - gpiop->flags |= (k << PINMUX_FLAG_DREG_SHIFT); - gpiop->flags &= ~PINMUX_FLAG_DBIT; - gpiop->flags |= (n << PINMUX_FLAG_DBIT_SHIFT); - return 0; - } - } - k++; - } - - BUG(); - - return -1; -} - -static void setup_data_regs(struct pinmux_info *gpioc) -{ - struct pinmux_data_reg *drp; - int k; - - for (k = gpioc->first_gpio; k <= gpioc->last_gpio; k++) - setup_data_reg(gpioc, k); - - k = 0; - while (1) { - drp = gpioc->data_regs + k; - - if (!drp->reg_width) - break; - - drp->reg_shadow = gpio_read_raw_reg(drp->reg, drp->reg_width); - k++; - } -} - -static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio, - struct pinmux_data_reg **drp, int *bitp) -{ - struct pinmux_gpio *gpiop = &gpioc->gpios[gpio]; - int k, n; - - if (!enum_in_range(gpiop->enum_id, &gpioc->data)) - return -1; - - k = (gpiop->flags & PINMUX_FLAG_DREG) >> PINMUX_FLAG_DREG_SHIFT; - n = (gpiop->flags & PINMUX_FLAG_DBIT) >> PINMUX_FLAG_DBIT_SHIFT; - *drp = gpioc->data_regs + k; - *bitp = n; - return 0; -} - -static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id, - struct pinmux_cfg_reg **crp, int *indexp, - unsigned long **cntp) -{ - struct pinmux_cfg_reg *config_reg; - unsigned long r_width, f_width; - int k, n; - - k = 0; - while (1) { - config_reg = gpioc->cfg_regs + k; - - r_width = config_reg->reg_width; - f_width = config_reg->field_width; - - if (!r_width) - break; - for (n = 0; n < (r_width / f_width) * 1 << f_width; n++) { - if (config_reg->enum_ids[n] == enum_id) { - *crp = config_reg; - *indexp = n; - *cntp = &config_reg->cnt[n / (1 << f_width)]; - return 0; - } - } - k++; - } - - return -1; -} - -static int get_gpio_enum_id(struct pinmux_info *gpioc, unsigned gpio, - int pos, pinmux_enum_t *enum_idp) -{ - pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id; - pinmux_enum_t *data = gpioc->gpio_data; - int k; - - if (!enum_in_range(enum_id, &gpioc->data)) { - if (!enum_in_range(enum_id, &gpioc->mark)) { - pr_err("non data/mark enum_id for gpio %d\n", gpio); - return -1; - } - } - - if (pos) { - *enum_idp = data[pos + 1]; - return pos + 1; - } - - for (k = 0; k < gpioc->gpio_data_size; k++) { - if (data[k] == enum_id) { - *enum_idp = data[k + 1]; - return k + 1; - } - } - - pr_err("cannot locate data/mark enum_id for gpio %d\n", gpio); - return -1; -} - -static void write_config_reg(struct pinmux_info *gpioc, - struct pinmux_cfg_reg *crp, - int index) -{ - unsigned long ncomb, pos, value; - - ncomb = 1 << crp->field_width; - pos = index / ncomb; - value = index % ncomb; - - gpio_write_reg(crp->reg, crp->reg_width, crp->field_width, pos, value); -} - -static int check_config_reg(struct pinmux_info *gpioc, - struct pinmux_cfg_reg *crp, - int index) -{ - unsigned long ncomb, pos, value; - - ncomb = 1 << crp->field_width; - pos = index / ncomb; - value = index % ncomb; - - if (gpio_read_reg(crp->reg, crp->reg_width, - crp->field_width, pos) == value) - return 0; - - return -1; -} - -enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE }; - -static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, - int pinmux_type, int cfg_mode) -{ - struct pinmux_cfg_reg *cr = NULL; - pinmux_enum_t enum_id; - struct pinmux_range *range; - int in_range, pos, index; - unsigned long *cntp; - - switch (pinmux_type) { - - case PINMUX_TYPE_FUNCTION: - range = NULL; - break; - - case PINMUX_TYPE_OUTPUT: - range = &gpioc->output; - break; - - case PINMUX_TYPE_INPUT: - range = &gpioc->input; - break; - - case PINMUX_TYPE_INPUT_PULLUP: - range = &gpioc->input_pu; - break; - - case PINMUX_TYPE_INPUT_PULLDOWN: - range = &gpioc->input_pd; - break; - - default: - goto out_err; - } - - pos = 0; - enum_id = 0; - index = 0; - while (1) { - pos = get_gpio_enum_id(gpioc, gpio, pos, &enum_id); - if (pos <= 0) - goto out_err; - - if (!enum_id) - break; - - in_range = enum_in_range(enum_id, &gpioc->function); - if (!in_range && range) { - in_range = enum_in_range(enum_id, range); - - if (in_range && enum_id == range->force) - continue; - } - - if (!in_range) - continue; - - if (get_config_reg(gpioc, enum_id, &cr, &index, &cntp) != 0) - goto out_err; - - switch (cfg_mode) { - case GPIO_CFG_DRYRUN: - if (!*cntp || !check_config_reg(gpioc, cr, index)) - continue; - break; - - case GPIO_CFG_REQ: - write_config_reg(gpioc, cr, index); - *cntp = *cntp + 1; - break; - - case GPIO_CFG_FREE: - *cntp = *cntp - 1; - break; - } - } - - return 0; - out_err: - return -1; -} - -static DEFINE_SPINLOCK(gpio_lock); - -static struct pinmux_info *chip_to_pinmux(struct gpio_chip *chip) -{ - return container_of(chip, struct pinmux_info, chip); -} - -static int sh_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - struct pinmux_info *gpioc = chip_to_pinmux(chip); - struct pinmux_data_reg *dummy; - unsigned long flags; - int i, ret, pinmux_type; - - ret = -EINVAL; - - if (!gpioc) - goto err_out; - - spin_lock_irqsave(&gpio_lock, flags); - - if ((gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE) - goto err_unlock; - - /* setup pin function here if no data is associated with pin */ - - if (get_data_reg(gpioc, offset, &dummy, &i) != 0) - pinmux_type = PINMUX_TYPE_FUNCTION; - else - pinmux_type = PINMUX_TYPE_GPIO; - - if (pinmux_type == PINMUX_TYPE_FUNCTION) { - if (pinmux_config_gpio(gpioc, offset, - pinmux_type, - GPIO_CFG_DRYRUN) != 0) - goto err_unlock; - - if (pinmux_config_gpio(gpioc, offset, - pinmux_type, - GPIO_CFG_REQ) != 0) - BUG(); - } - - gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE; - gpioc->gpios[offset].flags |= pinmux_type; - - ret = 0; - err_unlock: - spin_unlock_irqrestore(&gpio_lock, flags); - err_out: - return ret; -} - -static void sh_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct pinmux_info *gpioc = chip_to_pinmux(chip); - unsigned long flags; - int pinmux_type; - - if (!gpioc) - return; - - spin_lock_irqsave(&gpio_lock, flags); - - pinmux_type = gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE; - pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_FREE); - gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE; - gpioc->gpios[offset].flags |= PINMUX_TYPE_NONE; - - spin_unlock_irqrestore(&gpio_lock, flags); -} - -static int pinmux_direction(struct pinmux_info *gpioc, - unsigned gpio, int new_pinmux_type) -{ - int pinmux_type; - int ret = -EINVAL; - - if (!gpioc) - goto err_out; - - pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE; - - switch (pinmux_type) { - case PINMUX_TYPE_GPIO: - break; - case PINMUX_TYPE_OUTPUT: - case PINMUX_TYPE_INPUT: - case PINMUX_TYPE_INPUT_PULLUP: - case PINMUX_TYPE_INPUT_PULLDOWN: - pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE); - break; - default: - goto err_out; - } - - if (pinmux_config_gpio(gpioc, gpio, - new_pinmux_type, - GPIO_CFG_DRYRUN) != 0) - goto err_out; - - if (pinmux_config_gpio(gpioc, gpio, - new_pinmux_type, - GPIO_CFG_REQ) != 0) - BUG(); - - gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE; - gpioc->gpios[gpio].flags |= new_pinmux_type; - - ret = 0; - err_out: - return ret; -} - -static int sh_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct pinmux_info *gpioc = chip_to_pinmux(chip); - unsigned long flags; - int ret; - - spin_lock_irqsave(&gpio_lock, flags); - ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_INPUT); - spin_unlock_irqrestore(&gpio_lock, flags); - - return ret; -} - -static void sh_gpio_set_value(struct pinmux_info *gpioc, - unsigned gpio, int value) -{ - struct pinmux_data_reg *dr = NULL; - int bit = 0; - - if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) - BUG(); - else - gpio_write_bit(dr, bit, value); -} - -static int sh_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct pinmux_info *gpioc = chip_to_pinmux(chip); - unsigned long flags; - int ret; - - sh_gpio_set_value(gpioc, offset, value); - spin_lock_irqsave(&gpio_lock, flags); - ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_OUTPUT); - spin_unlock_irqrestore(&gpio_lock, flags); - - return ret; -} - -static int sh_gpio_get_value(struct pinmux_info *gpioc, unsigned gpio) -{ - struct pinmux_data_reg *dr = NULL; - int bit = 0; - - if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) { - BUG(); - return 0; - } - - return gpio_read_reg(dr->reg, dr->reg_width, 1, bit); -} - -static int sh_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return sh_gpio_get_value(chip_to_pinmux(chip), offset); -} - -static void sh_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - sh_gpio_set_value(chip_to_pinmux(chip), offset, value); -} - -int register_pinmux(struct pinmux_info *pip) -{ - struct gpio_chip *chip = &pip->chip; - - pr_info("sh pinmux: %s handling gpio %d -> %d\n", - pip->name, pip->first_gpio, pip->last_gpio); - - setup_data_regs(pip); - - chip->request = sh_gpio_request; - chip->free = sh_gpio_free; - chip->direction_input = sh_gpio_direction_input; - chip->get = sh_gpio_get; - chip->direction_output = sh_gpio_direction_output; - chip->set = sh_gpio_set; - - WARN_ON(pip->first_gpio != 0); /* needs testing */ - - chip->label = pip->name; - chip->owner = THIS_MODULE; - chip->base = pip->first_gpio; - chip->ngpio = (pip->last_gpio - pip->first_gpio) + 1; - - return gpiochip_add(chip); -} diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S index a78be74b8d3e..1151ecdffa71 100644 --- a/arch/sh/kernel/head_32.S +++ b/arch/sh/kernel/head_32.S @@ -33,7 +33,7 @@ ENTRY(empty_zero_page) .long 1 /* LOADER_TYPE */ .long 0x00000000 /* INITRD_START */ .long 0x00000000 /* INITRD_SIZE */ -#ifdef CONFIG_32BIT +#if defined(CONFIG_32BIT) && defined(CONFIG_PMB_FIXED) .long 0x53453f00 + 32 /* "SE?" = 32 bit */ #else .long 0x53453f00 + 29 /* "SE?" = 29 bit */ diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index 27ff2dc093c7..aaff0037fcd7 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -21,7 +21,7 @@ #include <asm/atomic.h> static int hlt_counter; -void (*pm_idle)(void); +void (*pm_idle)(void) = NULL; void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); @@ -39,48 +39,92 @@ static int __init hlt_setup(char *__unused) } __setup("hlt", hlt_setup); +static inline int hlt_works(void) +{ + return !hlt_counter; +} + +/* + * On SMP it's slightly faster (but much more power-consuming!) + * to poll the ->work.need_resched flag instead of waiting for the + * cross-CPU IPI to arrive. Use this option with caution. + */ +static void poll_idle(void) +{ + local_irq_enable(); + while (!need_resched()) + cpu_relax(); +} + void default_idle(void) { - if (!hlt_counter) { + if (hlt_works()) { clear_thread_flag(TIF_POLLING_NRFLAG); smp_mb__after_clear_bit(); - set_bl_bit(); - stop_critical_timings(); - while (!need_resched()) + if (!need_resched()) { + local_irq_enable(); cpu_sleep(); + } else + local_irq_enable(); - start_critical_timings(); - clear_bl_bit(); set_thread_flag(TIF_POLLING_NRFLAG); } else - while (!need_resched()) - cpu_relax(); + poll_idle(); } +/* + * The idle thread. There's no useful work to be done, so just try to conserve + * power and have a low exit latency (ie sit in a loop waiting for somebody to + * say that they'd like to reschedule) + */ void cpu_idle(void) { + unsigned int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while (1) { - void (*idle)(void) = pm_idle; + tick_nohz_stop_sched_tick(1); - if (!idle) - idle = default_idle; + while (!need_resched() && cpu_online(cpu)) { + check_pgt_cache(); + rmb(); - tick_nohz_stop_sched_tick(1); - while (!need_resched()) - idle(); - tick_nohz_restart_sched_tick(); + local_irq_disable(); + /* Don't trace irqs off for idle */ + stop_critical_timings(); + pm_idle(); + /* + * Sanity check to ensure that pm_idle() returns + * with IRQs enabled + */ + WARN_ON(irqs_disabled()); + start_critical_timings(); + } + tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); preempt_disable(); - check_pgt_cache(); } } +void __cpuinit select_idle_routine(void) +{ + /* + * If a platform has set its own idle routine, leave it alone. + */ + if (pm_idle) + return; + + if (hlt_works()) + pm_idle = default_idle; + else + pm_idle = poll_idle; +} + static void do_nothing(void *unused) { } diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c index b8fa6524760a..e1e1dbd19557 100644 --- a/arch/sh/kernel/io_generic.c +++ b/arch/sh/kernel/io_generic.c @@ -24,7 +24,7 @@ #define dummy_read() #endif -unsigned long generic_io_base; +unsigned long generic_io_base = 0; u8 generic_inb(unsigned long port) { @@ -147,8 +147,10 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count) void __iomem *generic_ioport_map(unsigned long addr, unsigned int size) { +#ifdef P1SEG if (PXSEG(addr) >= P1SEG) return (void __iomem *)addr; +#endif return (void __iomem *)(addr + generic_io_base); } diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index eac7da772fc2..e1913f28f418 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -37,7 +37,15 @@ void ack_bad_irq(unsigned int irq) */ static int show_other_interrupts(struct seq_file *p, int prec) { + int j; + + seq_printf(p, "%*s: ", prec, "NMI"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stat[j].__nmi_count); + seq_printf(p, " Non-maskable interrupts\n"); + seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); + return 0; } @@ -255,6 +263,12 @@ void __init init_IRQ(void) { plat_irq_setup(); + /* + * Pin any of the legacy IRQ vectors that haven't already been + * grabbed by the platform + */ + reserve_irq_legacy(); + /* Perform the machine specific initialisation */ if (sh_mv.mv_init_irq) sh_mv.mv_init_irq(); diff --git a/arch/sh/kernel/irq_32.c b/arch/sh/kernel/irq_32.c new file mode 100644 index 000000000000..e33ab15831f9 --- /dev/null +++ b/arch/sh/kernel/irq_32.c @@ -0,0 +1,57 @@ +/* + * SHcompact irqflags support + * + * Copyright (C) 2006 - 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/irqflags.h> +#include <linux/module.h> + +void notrace raw_local_irq_restore(unsigned long flags) +{ + unsigned long __dummy0, __dummy1; + + if (flags == RAW_IRQ_DISABLED) { + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + : "=&z" (__dummy0) + : /* no inputs */ + : "memory" + ); + } else { + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %1, %0\n\t" +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r6_bank, %1\n\t" + "or %1, %0\n\t" +#endif + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~RAW_IRQ_DISABLED) + : "memory" + ); + } +} +EXPORT_SYMBOL(raw_local_irq_restore); + +unsigned long notrace __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); + + return flags; +} +EXPORT_SYMBOL(__raw_local_save_flags); diff --git a/arch/sh/kernel/irq_64.c b/arch/sh/kernel/irq_64.c new file mode 100644 index 000000000000..32365ba0e039 --- /dev/null +++ b/arch/sh/kernel/irq_64.c @@ -0,0 +1,51 @@ +/* + * SHmedia irqflags support + * + * Copyright (C) 2006 - 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/irqflags.h> +#include <linux/module.h> +#include <cpu/registers.h> + +void notrace raw_local_irq_restore(unsigned long flags) +{ + unsigned long long __dummy; + + if (flags == RAW_IRQ_DISABLED) { + __asm__ __volatile__ ( + "getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (RAW_IRQ_DISABLED) + ); + } else { + __asm__ __volatile__ ( + "getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (~RAW_IRQ_DISABLED) + ); + } +} +EXPORT_SYMBOL(raw_local_irq_restore); + +unsigned long notrace __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %0\n\t" + "and %0, %1, %0" + : "=&r" (flags) + : "r" (RAW_IRQ_DISABLED) + ); + + return flags; +} +EXPORT_SYMBOL(__raw_local_save_flags); diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 7ea2704ea033..76f280223ebd 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -46,12 +46,6 @@ void machine_crash_shutdown(struct pt_regs *regs) */ int machine_kexec_prepare(struct kimage *image) { - /* older versions of kexec-tools are passing - * the zImage entry point as a virtual address. - */ - if (image->start != PHYSADDR(image->start)) - return -EINVAL; /* upgrade your kexec-tools */ - return 0; } diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c index cbce639b108a..1652340ba3f2 100644 --- a/arch/sh/kernel/machvec.c +++ b/arch/sh/kernel/machvec.c @@ -135,5 +135,9 @@ void __init sh_mv_setup(void) if (!sh_mv.mv_nr_irqs) sh_mv.mv_nr_irqs = NR_IRQS; +#ifdef P2SEG __set_io_port_base(P2SEG); +#else + __set_io_port_base(0); +#endif } diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index c2efdcde266f..43adddfe4c04 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -32,6 +32,7 @@ #include <linux/string.h> #include <linux/kernel.h> #include <asm/unaligned.h> +#include <asm/dwarf.h> void *module_alloc(unsigned long size) { @@ -145,10 +146,16 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - return module_bug_finalize(hdr, sechdrs, me); + int ret = 0; + + ret |= module_dwarf_finalize(hdr, sechdrs, me); + ret |= module_bug_finalize(hdr, sechdrs, me); + + return ret; } void module_arch_cleanup(struct module *mod) { module_bug_cleanup(mod); + module_dwarf_cleanup(mod); } diff --git a/arch/sh/kernel/perf_callchain.c b/arch/sh/kernel/perf_callchain.c new file mode 100644 index 000000000000..24ea837eac5b --- /dev/null +++ b/arch/sh/kernel/perf_callchain.c @@ -0,0 +1,98 @@ +/* + * Performance event callchain support - SuperH architecture code + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/perf_event.h> +#include <linux/percpu.h> +#include <asm/unwinder.h> +#include <asm/ptrace.h> + +static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip) +{ + if (entry->nr < PERF_MAX_STACK_DEPTH) + entry->ip[entry->nr++] = ip; +} + +static void callchain_warning(void *data, char *msg) +{ +} + +static void +callchain_warning_symbol(void *data, char *msg, unsigned long symbol) +{ +} + +static int callchain_stack(void *data, char *name) +{ + return 0; +} + +static void callchain_address(void *data, unsigned long addr, int reliable) +{ + struct perf_callchain_entry *entry = data; + + if (reliable) + callchain_store(entry, addr); +} + +static const struct stacktrace_ops callchain_ops = { + .warning = callchain_warning, + .warning_symbol = callchain_warning_symbol, + .stack = callchain_stack, + .address = callchain_address, +}; + +static void +perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry) +{ + callchain_store(entry, PERF_CONTEXT_KERNEL); + callchain_store(entry, regs->pc); + + unwind_stack(NULL, regs, NULL, &callchain_ops, entry); +} + +static void +perf_do_callchain(struct pt_regs *regs, struct perf_callchain_entry *entry) +{ + int is_user; + + if (!regs) + return; + + is_user = user_mode(regs); + + if (!current || current->pid == 0) + return; + + if (is_user && current->state != TASK_RUNNING) + return; + + /* + * Only the kernel side is implemented for now. + */ + if (!is_user) + perf_callchain_kernel(regs, entry); +} + +/* + * No need for separate IRQ and NMI entries. + */ +static DEFINE_PER_CPU(struct perf_callchain_entry, callchain); + +struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) +{ + struct perf_callchain_entry *entry = &__get_cpu_var(callchain); + + entry->nr = 0; + + perf_do_callchain(regs, entry); + + return entry; +} diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c new file mode 100644 index 000000000000..7ff0943e7a08 --- /dev/null +++ b/arch/sh/kernel/perf_event.c @@ -0,0 +1,312 @@ +/* + * Performance event support framework for SuperH hardware counters. + * + * Copyright (C) 2009 Paul Mundt + * + * Heavily based on the x86 and PowerPC implementations. + * + * x86: + * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de> + * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar + * Copyright (C) 2009 Jaswinder Singh Rajput + * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter + * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com> + * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com> + * + * ppc: + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/perf_event.h> +#include <asm/processor.h> + +struct cpu_hw_events { + struct perf_event *events[MAX_HWEVENTS]; + unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)]; + unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)]; +}; + +DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); + +static struct sh_pmu *sh_pmu __read_mostly; + +/* Number of perf_events counting hardware events */ +static atomic_t num_events; +/* Used to avoid races in calling reserve/release_pmc_hardware */ +static DEFINE_MUTEX(pmc_reserve_mutex); + +/* + * Stub these out for now, do something more profound later. + */ +int reserve_pmc_hardware(void) +{ + return 0; +} + +void release_pmc_hardware(void) +{ +} + +static inline int sh_pmu_initialized(void) +{ + return !!sh_pmu; +} + +/* + * Release the PMU if this is the last perf_event. + */ +static void hw_perf_event_destroy(struct perf_event *event) +{ + if (!atomic_add_unless(&num_events, -1, 1)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_dec_return(&num_events) == 0) + release_pmc_hardware(); + mutex_unlock(&pmc_reserve_mutex); + } +} + +static int hw_perf_cache_event(int config, int *evp) +{ + unsigned long type, op, result; + int ev; + + if (!sh_pmu->cache_events) + return -EINVAL; + + /* unpack config */ + type = config & 0xff; + op = (config >> 8) & 0xff; + result = (config >> 16) & 0xff; + + if (type >= PERF_COUNT_HW_CACHE_MAX || + op >= PERF_COUNT_HW_CACHE_OP_MAX || + result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ev = (*sh_pmu->cache_events)[type][op][result]; + if (ev == 0) + return -EOPNOTSUPP; + if (ev == -1) + return -EINVAL; + *evp = ev; + return 0; +} + +static int __hw_perf_event_init(struct perf_event *event) +{ + struct perf_event_attr *attr = &event->attr; + struct hw_perf_event *hwc = &event->hw; + int config = -1; + int err; + + if (!sh_pmu_initialized()) + return -ENODEV; + + /* + * All of the on-chip counters are "limited", in that they have + * no interrupts, and are therefore unable to do sampling without + * further work and timer assistance. + */ + if (hwc->sample_period) + return -EINVAL; + + /* + * See if we need to reserve the counter. + * + * If no events are currently in use, then we have to take a + * mutex to ensure that we don't race with another task doing + * reserve_pmc_hardware or release_pmc_hardware. + */ + err = 0; + if (!atomic_inc_not_zero(&num_events)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_read(&num_events) == 0 && + reserve_pmc_hardware()) + err = -EBUSY; + else + atomic_inc(&num_events); + mutex_unlock(&pmc_reserve_mutex); + } + + if (err) + return err; + + event->destroy = hw_perf_event_destroy; + + switch (attr->type) { + case PERF_TYPE_RAW: + config = attr->config & sh_pmu->raw_event_mask; + break; + case PERF_TYPE_HW_CACHE: + err = hw_perf_cache_event(attr->config, &config); + if (err) + return err; + break; + case PERF_TYPE_HARDWARE: + if (attr->config >= sh_pmu->max_events) + return -EINVAL; + + config = sh_pmu->event_map(attr->config); + break; + } + + if (config == -1) + return -EINVAL; + + hwc->config |= config; + + return 0; +} + +static void sh_perf_event_update(struct perf_event *event, + struct hw_perf_event *hwc, int idx) +{ + u64 prev_raw_count, new_raw_count; + s64 delta; + int shift = 0; + + /* + * Depending on the counter configuration, they may or may not + * be chained, in which case the previous counter value can be + * updated underneath us if the lower-half overflows. + * + * Our tactic to handle this is to first atomically read and + * exchange a new raw count - then add that new-prev delta + * count to the generic counter atomically. + * + * As there is no interrupt associated with the overflow events, + * this is the simplest approach for maintaining consistency. + */ +again: + prev_raw_count = atomic64_read(&hwc->prev_count); + new_raw_count = sh_pmu->read(idx); + + if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count) + goto again; + + /* + * Now we have the new raw value and have updated the prev + * timestamp already. We can now calculate the elapsed delta + * (counter-)time and add that to the generic counter. + * + * Careful, not all hw sign-extends above the physical width + * of the count. + */ + delta = (new_raw_count << shift) - (prev_raw_count << shift); + delta >>= shift; + + atomic64_add(delta, &event->count); +} + +static void sh_pmu_disable(struct perf_event *event) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + clear_bit(idx, cpuc->active_mask); + sh_pmu->disable(hwc, idx); + + barrier(); + + sh_perf_event_update(event, &event->hw, idx); + + cpuc->events[idx] = NULL; + clear_bit(idx, cpuc->used_mask); + + perf_event_update_userpage(event); +} + +static int sh_pmu_enable(struct perf_event *event) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (test_and_set_bit(idx, cpuc->used_mask)) { + idx = find_first_zero_bit(cpuc->used_mask, sh_pmu->num_events); + if (idx == sh_pmu->num_events) + return -EAGAIN; + + set_bit(idx, cpuc->used_mask); + hwc->idx = idx; + } + + sh_pmu->disable(hwc, idx); + + cpuc->events[idx] = event; + set_bit(idx, cpuc->active_mask); + + sh_pmu->enable(hwc, idx); + + perf_event_update_userpage(event); + + return 0; +} + +static void sh_pmu_read(struct perf_event *event) +{ + sh_perf_event_update(event, &event->hw, event->hw.idx); +} + +static const struct pmu pmu = { + .enable = sh_pmu_enable, + .disable = sh_pmu_disable, + .read = sh_pmu_read, +}; + +const struct pmu *hw_perf_event_init(struct perf_event *event) +{ + int err = __hw_perf_event_init(event); + if (unlikely(err)) { + if (event->destroy) + event->destroy(event); + return ERR_PTR(err); + } + + return &pmu; +} + +void hw_perf_event_setup(int cpu) +{ + struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu); + + memset(cpuhw, 0, sizeof(struct cpu_hw_events)); +} + +void hw_perf_enable(void) +{ + if (!sh_pmu_initialized()) + return; + + sh_pmu->enable_all(); +} + +void hw_perf_disable(void) +{ + if (!sh_pmu_initialized()) + return; + + sh_pmu->disable_all(); +} + +int register_sh_pmu(struct sh_pmu *pmu) +{ + if (sh_pmu) + return -EBUSY; + sh_pmu = pmu; + + pr_info("Performance Events: %s support registered\n", pmu->name); + + WARN_ON(pmu->num_events > MAX_HWEVENTS); + + return 0; +} diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 0673c4746be3..d8af889366a4 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -134,7 +134,10 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) regs.regs[5] = (unsigned long)fn; regs.pc = (unsigned long)kernel_thread_helper; - regs.sr = (1 << 30); + regs.sr = SR_MD; +#if defined(CONFIG_SH_FPU) + regs.sr |= SR_FD; +#endif /* Ok, create the new process.. */ pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, @@ -142,6 +145,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) return pid; } +EXPORT_SYMBOL(kernel_thread); /* * Free current thread data structures etc.. @@ -186,6 +190,16 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) return fpvalid; } +EXPORT_SYMBOL(dump_fpu); + +/* + * This gets called before we allocate a new thread and copy + * the current task into it. + */ +void prepare_to_copy(struct task_struct *tsk) +{ + unlazy_fpu(tsk, task_pt_regs(tsk)); +} asmlinkage void ret_from_fork(void); @@ -195,16 +209,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, { struct thread_info *ti = task_thread_info(p); struct pt_regs *childregs; -#if defined(CONFIG_SH_FPU) || defined(CONFIG_SH_DSP) +#if defined(CONFIG_SH_DSP) struct task_struct *tsk = current; #endif -#if defined(CONFIG_SH_FPU) - unlazy_fpu(tsk, regs); - p->thread.fpu = tsk->thread.fpu; - copy_to_stopped_child_used_math(p); -#endif - #if defined(CONFIG_SH_DSP) if (is_dsp_enabled(tsk)) { /* We can use the __save_dsp or just copy the struct: @@ -224,6 +232,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, } else { childregs->regs[15] = (unsigned long)childregs; ti->addr_limit = KERNEL_DS; + ti->status &= ~TS_USEDFPU; + p->fpu_counter = 0; } if (clone_flags & CLONE_SETTLS) @@ -288,9 +298,13 @@ static void ubc_set_tracing(int asid, unsigned long pc) __notrace_funcgraph struct task_struct * __switch_to(struct task_struct *prev, struct task_struct *next) { -#if defined(CONFIG_SH_FPU) + struct thread_struct *next_t = &next->thread; + unlazy_fpu(prev, task_pt_regs(prev)); -#endif + + /* we're going to use this soon, after a few expensive things */ + if (next->fpu_counter > 5) + prefetch(&next_t->fpu.hard); #ifdef CONFIG_MMU /* @@ -321,6 +335,14 @@ __switch_to(struct task_struct *prev, struct task_struct *next) #endif } + /* + * If the task has used fpu the last 5 timeslices, just do a full + * restore of the math state immediately to avoid the trap; the + * chances of needing FPU soon are obviously high now + */ + if (next->fpu_counter > 5) + fpu_state_restore(task_pt_regs(next)); + return prev; } diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 1192398ef582..359b8a2f4d2e 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -335,6 +335,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } +EXPORT_SYMBOL(kernel_thread); /* * Free current thread data structures etc.. @@ -417,6 +418,7 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) return 0; /* Task didn't use the fpu at all. */ #endif } +EXPORT_SYMBOL(dump_fpu); asmlinkage void ret_from_fork(void); diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c new file mode 100644 index 000000000000..df3ab5811074 --- /dev/null +++ b/arch/sh/kernel/return_address.c @@ -0,0 +1,54 @@ +/* + * arch/sh/kernel/return_address.c + * + * Copyright (C) 2009 Matt Fleming + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <asm/dwarf.h> + +#ifdef CONFIG_DWARF_UNWINDER + +void *return_address(unsigned int depth) +{ + struct dwarf_frame *frame; + unsigned long ra; + int i; + + for (i = 0, frame = NULL, ra = 0; i <= depth; i++) { + struct dwarf_frame *tmp; + + tmp = dwarf_unwind_stack(ra, frame); + + if (frame) + dwarf_free_frame(frame); + + frame = tmp; + + if (!frame || !frame->return_addr) + break; + + ra = frame->return_addr; + } + + /* Failed to unwind the stack to the specified depth. */ + WARN_ON(i != depth + 1); + + if (frame) + dwarf_free_frame(frame); + + return (void *)ra; +} + +#else + +void *return_address(unsigned int depth) +{ + return NULL; +} + +#endif diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 99b4fb553bf1..5a947a2567e4 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -453,6 +453,10 @@ void __init setup_arch(char **cmdline_p) paging_init(); +#ifdef CONFIG_PMB_ENABLE + pmb_init(); +#endif + #ifdef CONFIG_SMP plat_smp_setup(); #endif diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 444cce3ae921..3896f26efa4a 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -1,37 +1,11 @@ #include <linux/module.h> -#include <linux/smp.h> -#include <linux/user.h> -#include <linux/elfcore.h> -#include <linux/sched.h> -#include <linux/in6.h> -#include <linux/interrupt.h> -#include <linux/vmalloc.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <asm/sections.h> -#include <asm/processor.h> -#include <asm/uaccess.h> +#include <linux/string.h> +#include <linux/uaccess.h> +#include <linux/delay.h> +#include <linux/mm.h> #include <asm/checksum.h> -#include <asm/io.h> -#include <asm/delay.h> -#include <asm/tlbflush.h> -#include <asm/cacheflush.h> -#include <asm/ftrace.h> - -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - -/* platform dependent support */ -EXPORT_SYMBOL(dump_fpu); -EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(strlen); - -/* PCI exports */ -#ifdef CONFIG_PCI -EXPORT_SYMBOL(pci_alloc_consistent); -EXPORT_SYMBOL(pci_free_consistent); -#endif +#include <asm/sections.h> -/* mem exports */ EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); @@ -40,6 +14,13 @@ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); EXPORT_SYMBOL(__const_udelay); +EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(csum_partial); +EXPORT_SYMBOL(csum_partial_copy_generic); +EXPORT_SYMBOL(copy_page); +EXPORT_SYMBOL(__clear_user); +EXPORT_SYMBOL(_ebss); +EXPORT_SYMBOL(empty_zero_page); #define DECLARE_EXPORT(name) \ extern void name(void);EXPORT_SYMBOL(name) @@ -107,30 +88,6 @@ DECLARE_EXPORT(__sdivsi3_i4); DECLARE_EXPORT(__udivsi3_i4); DECLARE_EXPORT(__sdivsi3_i4i); DECLARE_EXPORT(__udivsi3_i4i); - -#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ - defined(CONFIG_SH7705_CACHE_32KB)) -/* needed by some modules */ -EXPORT_SYMBOL(flush_cache_all); -EXPORT_SYMBOL(flush_cache_range); -EXPORT_SYMBOL(flush_dcache_page); -#endif - #ifdef CONFIG_MCOUNT DECLARE_EXPORT(mcount); #endif -EXPORT_SYMBOL(csum_partial); -EXPORT_SYMBOL(csum_partial_copy_generic); -#ifdef CONFIG_IPV6 -EXPORT_SYMBOL(csum_ipv6_magic); -#endif -EXPORT_SYMBOL(copy_page); -EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(_ebss); -EXPORT_SYMBOL(empty_zero_page); - -#ifndef CONFIG_CACHE_OFF -EXPORT_SYMBOL(__flush_purge_region); -EXPORT_SYMBOL(__flush_wback_region); -EXPORT_SYMBOL(__flush_invalidate_region); -#endif diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index d008e17eb257..45afa5c51f67 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -24,16 +24,6 @@ #include <asm/delay.h> #include <asm/irq.h> -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - -/* platform dependent support */ -EXPORT_SYMBOL(dump_fpu); -EXPORT_SYMBOL(kernel_thread); - -#ifdef CONFIG_VT -EXPORT_SYMBOL(screen_info); -#endif - EXPORT_SYMBOL(__put_user_asm_b); EXPORT_SYMBOL(__put_user_asm_w); EXPORT_SYMBOL(__put_user_asm_l); diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index 3db37425210d..12815ce01ecd 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -67,7 +67,8 @@ sys_sigsuspend(old_sigset_t mask, current->state = TASK_INTERRUPTIBLE; schedule(); - set_thread_flag(TIF_RESTORE_SIGMASK); + set_restore_sigmask(); + return -ERESTARTNOHAND; } @@ -590,7 +591,7 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0) if (try_to_freeze()) goto no_signal; - if (test_thread_flag(TIF_RESTORE_SIGMASK)) + if (current_thread_info()->status & TS_RESTORE_SIGMASK) oldset = ¤t->saved_sigmask; else oldset = ¤t->blocked; @@ -602,12 +603,13 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0) /* Whee! Actually deliver the signal. */ if (handle_signal(signr, &ka, &info, oldset, regs, save_r0) == 0) { - /* a signal was successfully delivered; the saved + /* + * A signal was successfully delivered; the saved * sigmask will have been stored in the signal frame, * and will be restored by sigreturn, so we can simply - * clear the TIF_RESTORE_SIGMASK flag */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); + * clear the TS_RESTORE_SIGMASK flag + */ + current_thread_info()->status &= ~TS_RESTORE_SIGMASK; tracehook_signal_handler(signr, &info, &ka, regs, test_thread_flag(TIF_SINGLESTEP)); @@ -631,10 +633,12 @@ no_signal: } } - /* if there's no signal to deliver, we just put the saved sigmask - * back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); + /* + * If there's no signal to deliver, we just put the saved sigmask + * back. + */ + if (current_thread_info()->status & TS_RESTORE_SIGMASK) { + current_thread_info()->status &= ~TS_RESTORE_SIGMASK; sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); } } diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 74793c80a57a..feb3dddd3192 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -101,7 +101,7 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset) if (try_to_freeze()) goto no_signal; - if (test_thread_flag(TIF_RESTORE_SIGMASK)) + if (current_thread_info()->status & TS_RESTORE_SIGMASK) oldset = ¤t->saved_sigmask; else if (!oldset) oldset = ¤t->blocked; @@ -115,11 +115,9 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset) /* * If a signal was successfully delivered, the * saved sigmask is in its frame, and we can - * clear the TIF_RESTORE_SIGMASK flag. + * clear the TS_RESTORE_SIGMASK flag. */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - + current_thread_info()->status &= ~TS_RESTORE_SIGMASK; tracehook_signal_handler(signr, &info, &ka, regs, 0); return 1; } @@ -146,8 +144,8 @@ no_signal: } /* No signal to deliver -- put the saved sigmask back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); + if (current_thread_info()->status & TS_RESTORE_SIGMASK) { + current_thread_info()->status &= ~TS_RESTORE_SIGMASK; sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); } @@ -176,6 +174,7 @@ sys_sigsuspend(old_sigset_t mask, while (1) { current->state = TASK_INTERRUPTIBLE; schedule(); + set_restore_sigmask(); regs->pc += 4; /* because sys_sigreturn decrements the pc */ if (do_signal(regs, &saveset)) { /* pc now points at signal handler. Need to decrement diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 160db1003cfb..983e0792d5f3 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -122,7 +122,9 @@ int __cpuinit __cpu_up(unsigned int cpu) stack_start.bss_start = 0; /* don't clear bss for secondary cpus */ stack_start.start_kernel_fn = start_secondary; - flush_cache_all(); + flush_icache_range((unsigned long)&stack_start, + (unsigned long)&stack_start + sizeof(stack_start)); + wmb(); plat_start_cpu(cpu, (unsigned long)_stext); diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 8aa5d1ceaf14..71399cde03b5 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -28,37 +28,13 @@ #include <asm/cacheflush.h> #include <asm/cachectl.h> -static inline long -do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, int fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage int old_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, int fd, unsigned long off) { if (off & ~PAGE_MASK) return -EINVAL; - return do_mmap2(addr, len, prot, flags, fd, off>>PAGE_SHIFT); + return sys_mmap_pgoff(addr, len, prot, flags, fd, off>>PAGE_SHIFT); } asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, @@ -74,7 +50,7 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, pgoff >>= PAGE_SHIFT - 12; - return do_mmap2(addr, len, prot, flags, fd, pgoff); + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); } /* diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c index 0838942b7083..9b0b633b6c92 100644 --- a/arch/sh/kernel/topology.c +++ b/arch/sh/kernel/topology.c @@ -16,6 +16,32 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); +cpumask_t cpu_core_map[NR_CPUS]; + +static cpumask_t cpu_coregroup_map(unsigned int cpu) +{ + /* + * Presently all SH-X3 SMP cores are multi-cores, so just keep it + * simple until we have a method for determining topology.. + */ + return cpu_possible_map; +} + +const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +{ + return &cpu_core_map[cpu]; +} + +int arch_update_cpu_topology(void) +{ + unsigned int cpu; + + for_each_possible_cpu(cpu) + cpu_core_map[cpu] = cpu_coregroup_map(cpu); + + return 0; +} + static int __init topology_init(void) { int i, ret; diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index a8396f36bd14..7b036339dc92 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -9,8 +9,8 @@ #include <asm/unwinder.h> #include <asm/system.h> -#ifdef CONFIG_BUG -void handle_BUG(struct pt_regs *regs) +#ifdef CONFIG_GENERIC_BUG +static void handle_BUG(struct pt_regs *regs) { const struct bug_entry *bug; unsigned long bugaddr = regs->pc; @@ -81,7 +81,7 @@ BUILD_TRAP_HANDLER(bug) SIGTRAP) == NOTIFY_STOP) return; -#ifdef CONFIG_BUG +#ifdef CONFIG_GENERIC_BUG if (__kernel_text_address(instruction_pointer(regs))) { insn_size_t insn = *(insn_size_t *)instruction_pointer(regs); if (insn == TRAPA_BUG_OPCODE) @@ -95,9 +95,11 @@ BUILD_TRAP_HANDLER(bug) BUILD_TRAP_HANDLER(nmi) { + unsigned int cpu = smp_processor_id(); TRAP_HANDLER_DECL; nmi_enter(); + nmi_count(cpu)++; switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) { case NOTIFY_OK: diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index 7a2ee3a6b8e7..3da5a125d884 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -25,6 +25,7 @@ #include <linux/kexec.h> #include <linux/limits.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/sysfs.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -68,61 +69,49 @@ static const char *se_usermode_action[] = { "signal+warn" }; -static int -proc_alignment_read(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int alignment_proc_show(struct seq_file *m, void *v) { - char *p = page; - int len; - - p += sprintf(p, "User:\t\t%lu\n", se_user); - p += sprintf(p, "System:\t\t%lu\n", se_sys); - p += sprintf(p, "Half:\t\t%lu\n", se_half); - p += sprintf(p, "Word:\t\t%lu\n", se_word); - p += sprintf(p, "DWord:\t\t%lu\n", se_dword); - p += sprintf(p, "Multi:\t\t%lu\n", se_multi); - p += sprintf(p, "User faults:\t%i (%s)\n", se_usermode, + seq_printf(m, "User:\t\t%lu\n", se_user); + seq_printf(m, "System:\t\t%lu\n", se_sys); + seq_printf(m, "Half:\t\t%lu\n", se_half); + seq_printf(m, "Word:\t\t%lu\n", se_word); + seq_printf(m, "DWord:\t\t%lu\n", se_dword); + seq_printf(m, "Multi:\t\t%lu\n", se_multi); + seq_printf(m, "User faults:\t%i (%s)\n", se_usermode, se_usermode_action[se_usermode]); - p += sprintf(p, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn, + seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn, se_kernmode_warn ? "+warn" : ""); - - len = (p - page) - off; - if (len < 0) - len = 0; - - *eof = (len <= count) ? 1 : 0; - *start = page + off; - - return len; + return 0; } -static int proc_alignment_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int alignment_proc_open(struct inode *inode, struct file *file) { - char mode; - - if (count > 0) { - if (get_user(mode, buffer)) - return -EFAULT; - if (mode >= '0' && mode <= '5') - se_usermode = mode - '0'; - } - return count; + return single_open(file, alignment_proc_show, NULL); } -static int proc_alignment_kern_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t alignment_proc_write(struct file *file, + const char __user *buffer, size_t count, loff_t *pos) { + int *data = PDE(file->f_path.dentry->d_inode)->data; char mode; if (count > 0) { if (get_user(mode, buffer)) return -EFAULT; - if (mode >= '0' && mode <= '1') - se_kernmode_warn = mode - '0'; + if (mode >= '0' && mode <= '5') + *data = mode - '0'; } return count; } + +static const struct file_operations alignment_proc_fops = { + .owner = THIS_MODULE, + .open = alignment_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = alignment_proc_write, +}; #endif static void dump_mem(const char *str, unsigned long bottom, unsigned long top) @@ -945,14 +934,9 @@ void __init trap_init(void) set_exception_table_evt(0x800, do_reserved_inst); set_exception_table_evt(0x820, do_illegal_slot_inst); #elif defined(CONFIG_SH_FPU) -#ifdef CONFIG_CPU_SUBTYPE_SHX3 - set_exception_table_evt(0xd80, fpu_state_restore_trap_handler); - set_exception_table_evt(0xda0, fpu_state_restore_trap_handler); -#else set_exception_table_evt(0x800, fpu_state_restore_trap_handler); set_exception_table_evt(0x820, fpu_state_restore_trap_handler); #endif -#endif #ifdef CONFIG_CPU_SH2 set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler); @@ -1011,20 +995,16 @@ static int __init alignment_init(void) if (!dir) return -ENOMEM; - res = create_proc_entry("alignment", S_IWUSR | S_IRUGO, dir); + res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir, + &alignment_proc_fops, &se_usermode); if (!res) return -ENOMEM; - res->read_proc = proc_alignment_read; - res->write_proc = proc_alignment_write; - - res = create_proc_entry("kernel_alignment", S_IWUSR | S_IRUGO, dir); + res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir, + &alignment_proc_fops, &se_kernmode_warn); if (!res) return -ENOMEM; - res->read_proc = proc_alignment_read; - res->write_proc = proc_alignment_kern_write; - return 0; } diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index a969b47c5463..dab4d2129812 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -2,7 +2,7 @@ # Makefile for SuperH-specific library files.. # -lib-y = delay.o memset.o memmove.o memchr.o \ +lib-y = delay.o memmove.o memchr.o \ checksum.o strlen.o div64.o div64-generic.o # Extracted from libgcc @@ -23,8 +23,11 @@ obj-y += io.o memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o +memset-y := memset.o +memset-$(CONFIG_CPU_SH4) := memset-sh4.o + lib-$(CONFIG_MMU) += copy_page.o __clear_user.o lib-$(CONFIG_MCOUNT) += mcount.o -lib-y += $(memcpy-y) $(udivsi3-y) +lib-y += $(memcpy-y) $(memset-y) $(udivsi3-y) EXTRA_CFLAGS += -Werror diff --git a/arch/sh/lib/memset-sh4.S b/arch/sh/lib/memset-sh4.S new file mode 100644 index 000000000000..1a6e32cc4e4d --- /dev/null +++ b/arch/sh/lib/memset-sh4.S @@ -0,0 +1,107 @@ +/* + * "memset" implementation for SH4 + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (c) 2009 STMicroelectronics Limited + * Author: Stuart Menefy <stuart.menefy:st.com> + */ + +/* + * void *memset(void *s, int c, size_t n); + */ + +#include <linux/linkage.h> + +ENTRY(memset) + mov #12,r0 + add r6,r4 + cmp/gt r6,r0 + bt/s 40f ! if it's too small, set a byte at once + mov r4,r0 + and #3,r0 + cmp/eq #0,r0 + bt/s 2f ! It's aligned + sub r0,r6 +1: + dt r0 + bf/s 1b + mov.b r5,@-r4 +2: ! make VVVV + extu.b r5,r5 + swap.b r5,r0 ! V0 + or r0,r5 ! VV + swap.w r5,r0 ! VV00 + or r0,r5 ! VVVV + + ! Check if enough bytes need to be copied to be worth the big loop + mov #0x40, r0 ! (MT) + cmp/gt r6,r0 ! (MT) 64 > len => slow loop + + bt/s 22f + mov r6,r0 + + ! align the dst to the cache block size if necessary + mov r4, r3 + mov #~(0x1f), r1 + + and r3, r1 + cmp/eq r3, r1 + + bt/s 11f ! dst is already aligned + sub r1, r3 ! r3-r1 -> r3 + shlr2 r3 ! number of loops + +10: mov.l r5,@-r4 + dt r3 + bf/s 10b + add #-4, r6 + +11: ! dst is 32byte aligned + mov r6,r2 + mov #-5,r0 + shld r0,r2 ! number of loops + + add #-32, r4 + mov r5, r0 +12: + movca.l r0,@r4 + mov.l r5,@(4, r4) + mov.l r5,@(8, r4) + mov.l r5,@(12,r4) + mov.l r5,@(16,r4) + mov.l r5,@(20,r4) + add #-0x20, r6 + mov.l r5,@(24,r4) + dt r2 + mov.l r5,@(28,r4) + bf/s 12b + add #-32, r4 + + add #32, r4 + mov #8, r0 + cmp/ge r0, r6 + bf 40f + + mov r6,r0 +22: + shlr2 r0 + shlr r0 ! r0 = r6 >> 3 +3: + dt r0 + mov.l r5,@-r4 ! set 8-byte at once + bf/s 3b + mov.l r5,@-r4 + ! + mov #7,r0 + and r0,r6 + + ! fill bytes (length may be zero) +40: tst r6,r6 + bt 5f +4: + dt r6 + bf/s 4b + mov.b r5,@-r4 +5: + rts + mov r4,r0 diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c index ac2d7abd2567..d6c15cae0912 100644 --- a/arch/sh/math-emu/math.c +++ b/arch/sh/math-emu/math.c @@ -558,7 +558,7 @@ static int ieee_fpe_handler(struct pt_regs *regs) (finsn >> 8) & 0xf); tsk->thread.fpu.hard.fpscr &= ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); - set_tsk_thread_flag(tsk, TIF_USEDFPU); + task_thread_info(tsk)->status |= TS_USEDFPU; } else { info.si_signo = SIGFPE; info.si_errno = 0; @@ -619,10 +619,10 @@ int do_fpu_inst(unsigned short inst, struct pt_regs *regs) struct task_struct *tsk = current; struct sh_fpu_soft_struct *fpu = &(tsk->thread.fpu.soft); - if (!test_tsk_thread_flag(tsk, TIF_USEDFPU)) { + if (!(task_thread_info(tsk)->status & TS_USEDFPU)) { /* initialize once. */ fpu_init(fpu); - set_tsk_thread_flag(tsk, TIF_USEDFPU); + task_thread_info(tsk)->status |= TS_USEDFPU; } return fpu_emulate(inst, fpu, regs); diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 7f7b52f9beba..0e7ba8e891cf 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -82,8 +82,7 @@ config 32BIT config PMB_ENABLE bool "Support 32-bit physical addressing through PMB" - depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) - select 32BIT + depends on MMU && EXPERIMENTAL && CPU_SH4A default y help If you say Y here, physical addressing will be extended to @@ -97,8 +96,7 @@ choice config PMB bool "PMB" - depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) - select 32BIT + depends on MMU && EXPERIMENTAL && CPU_SH4A help If you say Y here, physical addressing will be extended to 32-bits through the SH-4A PMB. If this is not set, legacy @@ -106,9 +104,7 @@ config PMB config PMB_FIXED bool "fixed PMB" - depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || \ - CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785) + depends on MMU && EXPERIMENTAL && CPU_SH4A select 32BIT help If this option is enabled, fixed PMB mappings are inherited @@ -258,6 +254,15 @@ endchoice source "mm/Kconfig" +config SCHED_MC + bool "Multi-core scheduler support" + depends on SMP + default y + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + endmenu menu "Cache configuration" diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index 3759bf853293..8a70535fa7ce 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -33,8 +33,7 @@ obj-y += $(tlb-y) endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o -obj-$(CONFIG_PMB) += pmb.o -obj-$(CONFIG_PMB_FIXED) += pmb-fixed.o +obj-$(CONFIG_PMB_ENABLE) += pmb.o obj-$(CONFIG_NUMA) += numa.o # Special flags for fault_64.o. This puts restrictions on the number of diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index b7f235c74d66..f36a08bf3d5c 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -2,7 +2,7 @@ * arch/sh/mm/cache-sh4.c * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2001 - 2007 Paul Mundt + * Copyright (C) 2001 - 2009 Paul Mundt * Copyright (C) 2003 Richard Curnow * Copyright (c) 2007 STMicroelectronics (R&D) Ltd. * @@ -15,6 +15,8 @@ #include <linux/io.h> #include <linux/mutex.h> #include <linux/fs.h> +#include <linux/highmem.h> +#include <asm/pgtable.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> @@ -23,21 +25,12 @@ * flushing. Anything exceeding this will simply flush the dcache in its * entirety. */ -#define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */ #define MAX_ICACHE_PAGES 32 static void __flush_cache_one(unsigned long addr, unsigned long phys, unsigned long exec_offset); /* - * This is initialised here to ensure that it is not placed in the BSS. If - * that were to happen, note that cache_init gets called before the BSS is - * cleared, so this would get nulled out which would be hopeless. - */ -static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) = - (void (*)(unsigned long, unsigned long))0xdeadbeef; - -/* * Write back the range of D-cache, and purge the I-cache. * * Called from kernel/module.c:sys_init_module and routine for a.out format, @@ -97,15 +90,15 @@ static inline void flush_cache_one(unsigned long start, unsigned long phys) unsigned long flags, exec_offset = 0; /* - * All types of SH-4 require PC to be in P2 to operate on the I-cache. - * Some types of SH-4 require PC to be in P2 to operate on the D-cache. + * All types of SH-4 require PC to be uncached to operate on the I-cache. + * Some types of SH-4 require PC to be uncached to operate on the D-cache. */ if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) || (start < CACHE_OC_ADDRESS_ARRAY)) - exec_offset = 0x20000000; + exec_offset = cached_to_uncached; local_irq_save(flags); - __flush_cache_one(start | SH_CACHE_ASSOC, P1SEGADDR(phys), exec_offset); + __flush_cache_one(start, phys, exec_offset); local_irq_restore(flags); } @@ -124,7 +117,7 @@ static void sh4_flush_dcache_page(void *arg) else #endif { - unsigned long phys = PHYSADDR(page_address(page)); + unsigned long phys = page_to_phys(page); unsigned long addr = CACHE_OC_ADDRESS_ARRAY; int i, n; @@ -159,10 +152,27 @@ static void __uses_jump_to_uncached flush_icache_all(void) local_irq_restore(flags); } -static inline void flush_dcache_all(void) +static void flush_dcache_all(void) { - (*__flush_dcache_segment_fn)(0UL, boot_cpu_data.dcache.way_size); - wmb(); + unsigned long addr, end_addr, entry_offset; + + end_addr = CACHE_OC_ADDRESS_ARRAY + + (current_cpu_data.dcache.sets << + current_cpu_data.dcache.entry_shift) * + current_cpu_data.dcache.ways; + + entry_offset = 1 << current_cpu_data.dcache.entry_shift; + + for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; ) { + __raw_writel(0, addr); addr += entry_offset; + __raw_writel(0, addr); addr += entry_offset; + __raw_writel(0, addr); addr += entry_offset; + __raw_writel(0, addr); addr += entry_offset; + __raw_writel(0, addr); addr += entry_offset; + __raw_writel(0, addr); addr += entry_offset; + __raw_writel(0, addr); addr += entry_offset; + __raw_writel(0, addr); addr += entry_offset; + } } static void sh4_flush_cache_all(void *unused) @@ -171,89 +181,13 @@ static void sh4_flush_cache_all(void *unused) flush_icache_all(); } -static void __flush_cache_mm(struct mm_struct *mm, unsigned long start, - unsigned long end) -{ - unsigned long d = 0, p = start & PAGE_MASK; - unsigned long alias_mask = boot_cpu_data.dcache.alias_mask; - unsigned long n_aliases = boot_cpu_data.dcache.n_aliases; - unsigned long select_bit; - unsigned long all_aliases_mask; - unsigned long addr_offset; - pgd_t *dir; - pmd_t *pmd; - pud_t *pud; - pte_t *pte; - int i; - - dir = pgd_offset(mm, p); - pud = pud_offset(dir, p); - pmd = pmd_offset(pud, p); - end = PAGE_ALIGN(end); - - all_aliases_mask = (1 << n_aliases) - 1; - - do { - if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) { - p &= PMD_MASK; - p += PMD_SIZE; - pmd++; - - continue; - } - - pte = pte_offset_kernel(pmd, p); - - do { - unsigned long phys; - pte_t entry = *pte; - - if (!(pte_val(entry) & _PAGE_PRESENT)) { - pte++; - p += PAGE_SIZE; - continue; - } - - phys = pte_val(entry) & PTE_PHYS_MASK; - - if ((p ^ phys) & alias_mask) { - d |= 1 << ((p & alias_mask) >> PAGE_SHIFT); - d |= 1 << ((phys & alias_mask) >> PAGE_SHIFT); - - if (d == all_aliases_mask) - goto loop_exit; - } - - pte++; - p += PAGE_SIZE; - } while (p < end && ((unsigned long)pte & ~PAGE_MASK)); - pmd++; - } while (p < end); - -loop_exit: - addr_offset = 0; - select_bit = 1; - - for (i = 0; i < n_aliases; i++) { - if (d & select_bit) { - (*__flush_dcache_segment_fn)(addr_offset, PAGE_SIZE); - wmb(); - } - - select_bit <<= 1; - addr_offset += PAGE_SIZE; - } -} - /* * Note : (RPC) since the caches are physically tagged, the only point * of flush_cache_mm for SH-4 is to get rid of aliases from the * D-cache. The assumption elsewhere, e.g. flush_cache_range, is that * lines can stay resident so long as the virtual address they were * accessed with (hence cache set) is in accord with the physical - * address (i.e. tag). It's no different here. So I reckon we don't - * need to flush the I-cache, since aliases don't matter for that. We - * should try that. + * address (i.e. tag). It's no different here. * * Caller takes mm->mmap_sem. */ @@ -264,33 +198,7 @@ static void sh4_flush_cache_mm(void *arg) if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT) return; - /* - * If cache is only 4k-per-way, there are never any 'aliases'. Since - * the cache is physically tagged, the data can just be left in there. - */ - if (boot_cpu_data.dcache.n_aliases == 0) - return; - - /* - * Don't bother groveling around the dcache for the VMA ranges - * if there are too many PTEs to make it worthwhile. - */ - if (mm->nr_ptes >= MAX_DCACHE_PAGES) - flush_dcache_all(); - else { - struct vm_area_struct *vma; - - /* - * In this case there are reasonably sized ranges to flush, - * iterate through the VMA list and take care of any aliases. - */ - for (vma = mm->mmap; vma; vma = vma->vm_next) - __flush_cache_mm(mm, vma->vm_start, vma->vm_end); - } - - /* Only touch the icache if one of the VMAs has VM_EXEC set. */ - if (mm->exec_vm) - flush_icache_all(); + flush_dcache_all(); } /* @@ -303,44 +211,63 @@ static void sh4_flush_cache_page(void *args) { struct flusher_data *data = args; struct vm_area_struct *vma; + struct page *page; unsigned long address, pfn, phys; - unsigned int alias_mask; + int map_coherent = 0; + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + void *vaddr; vma = data->vma; - address = data->addr1; + address = data->addr1 & PAGE_MASK; pfn = data->addr2; phys = pfn << PAGE_SHIFT; + page = pfn_to_page(pfn); if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT) return; - alias_mask = boot_cpu_data.dcache.alias_mask; - - /* We only need to flush D-cache when we have alias */ - if ((address^phys) & alias_mask) { - /* Loop 4K of the D-cache */ - flush_cache_one( - CACHE_OC_ADDRESS_ARRAY | (address & alias_mask), - phys); - /* Loop another 4K of the D-cache */ - flush_cache_one( - CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask), - phys); - } + pgd = pgd_offset(vma->vm_mm, address); + pud = pud_offset(pgd, address); + pmd = pmd_offset(pud, address); + pte = pte_offset_kernel(pmd, address); + + /* If the page isn't present, there is nothing to do here. */ + if (!(pte_val(*pte) & _PAGE_PRESENT)) + return; - alias_mask = boot_cpu_data.icache.alias_mask; - if (vma->vm_flags & VM_EXEC) { + if ((vma->vm_mm == current->active_mm)) + vaddr = NULL; + else { /* - * Evict entries from the portion of the cache from which code - * may have been executed at this address (virtual). There's - * no need to evict from the portion corresponding to the - * physical address as for the D-cache, because we know the - * kernel has never executed the code through its identity - * translation. + * Use kmap_coherent or kmap_atomic to do flushes for + * another ASID than the current one. */ - flush_cache_one( - CACHE_IC_ADDRESS_ARRAY | (address & alias_mask), - phys); + map_coherent = (current_cpu_data.dcache.n_aliases && + !test_bit(PG_dcache_dirty, &page->flags) && + page_mapped(page)); + if (map_coherent) + vaddr = kmap_coherent(page, address); + else + vaddr = kmap_atomic(page, KM_USER0); + + address = (unsigned long)vaddr; + } + + if (pages_do_alias(address, phys)) + flush_cache_one(CACHE_OC_ADDRESS_ARRAY | + (address & shm_align_mask), phys); + + if (vma->vm_flags & VM_EXEC) + flush_icache_all(); + + if (vaddr) { + if (map_coherent) + kunmap_coherent(vaddr); + else + kunmap_atomic(vaddr, KM_USER0); } } @@ -373,24 +300,10 @@ static void sh4_flush_cache_range(void *args) if (boot_cpu_data.dcache.n_aliases == 0) return; - /* - * Don't bother with the lookup and alias check if we have a - * wide range to cover, just blow away the dcache in its - * entirety instead. -- PFM. - */ - if (((end - start) >> PAGE_SHIFT) >= MAX_DCACHE_PAGES) - flush_dcache_all(); - else - __flush_cache_mm(vma->vm_mm, start, end); + flush_dcache_all(); - if (vma->vm_flags & VM_EXEC) { - /* - * TODO: Is this required??? Need to look at how I-cache - * coherency is assured when new programs are loaded to see if - * this matters. - */ + if (vma->vm_flags & VM_EXEC) flush_icache_all(); - } } /** @@ -464,245 +377,6 @@ static void __flush_cache_one(unsigned long addr, unsigned long phys, } while (--way_count != 0); } -/* - * Break the 1, 2 and 4 way variants of this out into separate functions to - * avoid nearly all the overhead of having the conditional stuff in the function - * bodies (+ the 1 and 2 way cases avoid saving any registers too). - * - * We want to eliminate unnecessary bus transactions, so this code uses - * a non-obvious technique. - * - * Loop over a cache way sized block of, one cache line at a time. For each - * line, use movca.a to cause the current cache line contents to be written - * back, but without reading anything from main memory. However this has the - * side effect that the cache is now caching that memory location. So follow - * this with a cache invalidate to mark the cache line invalid. And do all - * this with interrupts disabled, to avoid the cache line being accidently - * evicted while it is holding garbage. - * - * This also breaks in a number of circumstances: - * - if there are modifications to the region of memory just above - * empty_zero_page (for example because a breakpoint has been placed - * there), then these can be lost. - * - * This is because the the memory address which the cache temporarily - * caches in the above description is empty_zero_page. So the - * movca.l hits the cache (it is assumed that it misses, or at least - * isn't dirty), modifies the line and then invalidates it, losing the - * required change. - * - * - If caches are disabled or configured in write-through mode, then - * the movca.l writes garbage directly into memory. - */ -static void __flush_dcache_segment_writethrough(unsigned long start, - unsigned long extent_per_way) -{ - unsigned long addr; - int i; - - addr = CACHE_OC_ADDRESS_ARRAY | (start & cpu_data->dcache.entry_mask); - - while (extent_per_way) { - for (i = 0; i < cpu_data->dcache.ways; i++) - __raw_writel(0, addr + cpu_data->dcache.way_incr * i); - - addr += cpu_data->dcache.linesz; - extent_per_way -= cpu_data->dcache.linesz; - } -} - -static void __flush_dcache_segment_1way(unsigned long start, - unsigned long extent_per_way) -{ - unsigned long orig_sr, sr_with_bl; - unsigned long base_addr; - unsigned long way_incr, linesz, way_size; - struct cache_info *dcache; - register unsigned long a0, a0e; - - asm volatile("stc sr, %0" : "=r" (orig_sr)); - sr_with_bl = orig_sr | (1<<28); - base_addr = ((unsigned long)&empty_zero_page[0]); - - /* - * The previous code aligned base_addr to 16k, i.e. the way_size of all - * existing SH-4 D-caches. Whilst I don't see a need to have this - * aligned to any better than the cache line size (which it will be - * anyway by construction), let's align it to at least the way_size of - * any existing or conceivable SH-4 D-cache. -- RPC - */ - base_addr = ((base_addr >> 16) << 16); - base_addr |= start; - - dcache = &boot_cpu_data.dcache; - linesz = dcache->linesz; - way_incr = dcache->way_incr; - way_size = dcache->way_size; - - a0 = base_addr; - a0e = base_addr + extent_per_way; - do { - asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); - asm volatile("movca.l r0, @%0\n\t" - "ocbi @%0" : : "r" (a0)); - a0 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "ocbi @%0" : : "r" (a0)); - a0 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "ocbi @%0" : : "r" (a0)); - a0 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "ocbi @%0" : : "r" (a0)); - asm volatile("ldc %0, sr" : : "r" (orig_sr)); - a0 += linesz; - } while (a0 < a0e); -} - -static void __flush_dcache_segment_2way(unsigned long start, - unsigned long extent_per_way) -{ - unsigned long orig_sr, sr_with_bl; - unsigned long base_addr; - unsigned long way_incr, linesz, way_size; - struct cache_info *dcache; - register unsigned long a0, a1, a0e; - - asm volatile("stc sr, %0" : "=r" (orig_sr)); - sr_with_bl = orig_sr | (1<<28); - base_addr = ((unsigned long)&empty_zero_page[0]); - - /* See comment under 1-way above */ - base_addr = ((base_addr >> 16) << 16); - base_addr |= start; - - dcache = &boot_cpu_data.dcache; - linesz = dcache->linesz; - way_incr = dcache->way_incr; - way_size = dcache->way_size; - - a0 = base_addr; - a1 = a0 + way_incr; - a0e = base_addr + extent_per_way; - do { - asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); - asm volatile("movca.l r0, @%0\n\t" - "movca.l r0, @%1\n\t" - "ocbi @%0\n\t" - "ocbi @%1" : : - "r" (a0), "r" (a1)); - a0 += linesz; - a1 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "movca.l r0, @%1\n\t" - "ocbi @%0\n\t" - "ocbi @%1" : : - "r" (a0), "r" (a1)); - a0 += linesz; - a1 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "movca.l r0, @%1\n\t" - "ocbi @%0\n\t" - "ocbi @%1" : : - "r" (a0), "r" (a1)); - a0 += linesz; - a1 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "movca.l r0, @%1\n\t" - "ocbi @%0\n\t" - "ocbi @%1" : : - "r" (a0), "r" (a1)); - asm volatile("ldc %0, sr" : : "r" (orig_sr)); - a0 += linesz; - a1 += linesz; - } while (a0 < a0e); -} - -static void __flush_dcache_segment_4way(unsigned long start, - unsigned long extent_per_way) -{ - unsigned long orig_sr, sr_with_bl; - unsigned long base_addr; - unsigned long way_incr, linesz, way_size; - struct cache_info *dcache; - register unsigned long a0, a1, a2, a3, a0e; - - asm volatile("stc sr, %0" : "=r" (orig_sr)); - sr_with_bl = orig_sr | (1<<28); - base_addr = ((unsigned long)&empty_zero_page[0]); - - /* See comment under 1-way above */ - base_addr = ((base_addr >> 16) << 16); - base_addr |= start; - - dcache = &boot_cpu_data.dcache; - linesz = dcache->linesz; - way_incr = dcache->way_incr; - way_size = dcache->way_size; - - a0 = base_addr; - a1 = a0 + way_incr; - a2 = a1 + way_incr; - a3 = a2 + way_incr; - a0e = base_addr + extent_per_way; - do { - asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); - asm volatile("movca.l r0, @%0\n\t" - "movca.l r0, @%1\n\t" - "movca.l r0, @%2\n\t" - "movca.l r0, @%3\n\t" - "ocbi @%0\n\t" - "ocbi @%1\n\t" - "ocbi @%2\n\t" - "ocbi @%3\n\t" : : - "r" (a0), "r" (a1), "r" (a2), "r" (a3)); - a0 += linesz; - a1 += linesz; - a2 += linesz; - a3 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "movca.l r0, @%1\n\t" - "movca.l r0, @%2\n\t" - "movca.l r0, @%3\n\t" - "ocbi @%0\n\t" - "ocbi @%1\n\t" - "ocbi @%2\n\t" - "ocbi @%3\n\t" : : - "r" (a0), "r" (a1), "r" (a2), "r" (a3)); - a0 += linesz; - a1 += linesz; - a2 += linesz; - a3 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "movca.l r0, @%1\n\t" - "movca.l r0, @%2\n\t" - "movca.l r0, @%3\n\t" - "ocbi @%0\n\t" - "ocbi @%1\n\t" - "ocbi @%2\n\t" - "ocbi @%3\n\t" : : - "r" (a0), "r" (a1), "r" (a2), "r" (a3)); - a0 += linesz; - a1 += linesz; - a2 += linesz; - a3 += linesz; - asm volatile("movca.l r0, @%0\n\t" - "movca.l r0, @%1\n\t" - "movca.l r0, @%2\n\t" - "movca.l r0, @%3\n\t" - "ocbi @%0\n\t" - "ocbi @%1\n\t" - "ocbi @%2\n\t" - "ocbi @%3\n\t" : : - "r" (a0), "r" (a1), "r" (a2), "r" (a3)); - asm volatile("ldc %0, sr" : : "r" (orig_sr)); - a0 += linesz; - a1 += linesz; - a2 += linesz; - a3 += linesz; - } while (a0 < a0e); -} - extern void __weak sh4__flush_region_init(void); /* @@ -710,32 +384,11 @@ extern void __weak sh4__flush_region_init(void); */ void __init sh4_cache_init(void) { - unsigned int wt_enabled = !!(__raw_readl(CCR) & CCR_CACHE_WT); - printk("PVR=%08x CVR=%08x PRR=%08x\n", ctrl_inl(CCN_PVR), ctrl_inl(CCN_CVR), ctrl_inl(CCN_PRR)); - if (wt_enabled) - __flush_dcache_segment_fn = __flush_dcache_segment_writethrough; - else { - switch (boot_cpu_data.dcache.ways) { - case 1: - __flush_dcache_segment_fn = __flush_dcache_segment_1way; - break; - case 2: - __flush_dcache_segment_fn = __flush_dcache_segment_2way; - break; - case 4: - __flush_dcache_segment_fn = __flush_dcache_segment_4way; - break; - default: - panic("unknown number of cache ways\n"); - break; - } - } - local_flush_icache_range = sh4_flush_icache_range; local_flush_dcache_page = sh4_flush_dcache_page; local_flush_cache_all = sh4_flush_cache_all; diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c index 467ff8e260f7..eb4cc4ec7952 100644 --- a/arch/sh/mm/cache-sh5.c +++ b/arch/sh/mm/cache-sh5.c @@ -563,7 +563,7 @@ static void sh5_flush_cache_page(void *args) static void sh5_flush_dcache_page(void *page) { - sh64_dcache_purge_phy_page(page_to_phys(page)); + sh64_dcache_purge_phy_page(page_to_phys((struct page *)page)); wmb(); } diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 2601935eb589..f527fb70fce6 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -141,7 +141,7 @@ static void sh7705_flush_dcache_page(void *arg) if (mapping && !mapping_mapped(mapping)) set_bit(PG_dcache_dirty, &page->flags); else - __flush_dcache_page(PHYSADDR(page_address(page))); + __flush_dcache_page(__pa(page_address(page))); } static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args) diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c index a2dc7f9ecc51..e9415d3ea94a 100644 --- a/arch/sh/mm/cache.c +++ b/arch/sh/mm/cache.c @@ -27,8 +27,11 @@ void (*local_flush_icache_page)(void *args) = cache_noop; void (*local_flush_cache_sigtramp)(void *args) = cache_noop; void (*__flush_wback_region)(void *start, int size); +EXPORT_SYMBOL(__flush_wback_region); void (*__flush_purge_region)(void *start, int size); +EXPORT_SYMBOL(__flush_purge_region); void (*__flush_invalidate_region)(void *start, int size); +EXPORT_SYMBOL(__flush_invalidate_region); static inline void noop__flush_region(void *start, int size) { @@ -161,14 +164,21 @@ void flush_cache_all(void) { cacheop_on_each_cpu(local_flush_cache_all, NULL, 1); } +EXPORT_SYMBOL(flush_cache_all); void flush_cache_mm(struct mm_struct *mm) { + if (boot_cpu_data.dcache.n_aliases == 0) + return; + cacheop_on_each_cpu(local_flush_cache_mm, mm, 1); } void flush_cache_dup_mm(struct mm_struct *mm) { + if (boot_cpu_data.dcache.n_aliases == 0) + return; + cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1); } @@ -195,11 +205,13 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1); } +EXPORT_SYMBOL(flush_cache_range); void flush_dcache_page(struct page *page) { cacheop_on_each_cpu(local_flush_dcache_page, page, 1); } +EXPORT_SYMBOL(flush_dcache_page); void flush_icache_range(unsigned long start, unsigned long end) { @@ -265,7 +277,11 @@ static void __init emit_cache_params(void) void __init cpu_cache_init(void) { - unsigned int cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE); + unsigned int cache_disabled = 0; + +#ifdef CCR + cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE); +#endif compute_alias(&boot_cpu_data.icache); compute_alias(&boot_cpu_data.dcache); diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index e098ec158ddb..902967e3f841 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -15,11 +15,15 @@ #include <linux/dma-mapping.h> #include <linux/dma-debug.h> #include <linux/io.h> +#include <linux/module.h> #include <asm/cacheflush.h> #include <asm/addrspace.h> #define PREALLOC_DMA_DEBUG_ENTRIES 4096 +struct dma_map_ops *dma_ops; +EXPORT_SYMBOL(dma_ops); + static int __init dma_init(void) { dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); @@ -27,15 +31,12 @@ static int __init dma_init(void) } fs_initcall(dma_init); -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp) +void *dma_generic_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp) { void *ret, *ret_nocache; int order = get_order(size); - if (dma_alloc_from_coherent(dev, size, dma_handle, &ret)) - return ret; - ret = (void *)__get_free_pages(gfp, order); if (!ret) return NULL; @@ -57,35 +58,26 @@ void *dma_alloc_coherent(struct device *dev, size_t size, *dma_handle = virt_to_phys(ret); - debug_dma_alloc_coherent(dev, size, *dma_handle, ret_nocache); - return ret_nocache; } -EXPORT_SYMBOL(dma_alloc_coherent); -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) +void dma_generic_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) { int order = get_order(size); unsigned long pfn = dma_handle >> PAGE_SHIFT; int k; - WARN_ON(irqs_disabled()); /* for portability */ - - if (dma_release_from_coherent(dev, order, vaddr)) - return; - - debug_dma_free_coherent(dev, size, vaddr, dma_handle); for (k = 0; k < (1 << order); k++) __free_pages(pfn_to_page(pfn + k), 0); + iounmap(vaddr); } -EXPORT_SYMBOL(dma_free_coherent); void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { -#ifdef CONFIG_CPU_SH5 +#if defined(CONFIG_CPU_SH5) || defined(CONFIG_PMB) void *p1addr = vaddr; #else void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr); diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 8173e38afd38..432acd07e76a 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -15,6 +15,7 @@ #include <linux/pagemap.h> #include <linux/percpu.h> #include <linux/io.h> +#include <linux/dma-mapping.h> #include <asm/mmu_context.h> #include <asm/tlb.h> #include <asm/cacheflush.h> @@ -186,11 +187,21 @@ void __init paging_init(void) set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start)); } +/* + * Early initialization for any I/O MMUs we might have. + */ +static void __init iommu_init(void) +{ + no_iommu_init(); +} + void __init mem_init(void) { int codesize, datasize, initsize; int nid; + iommu_init(); + num_physpages = 0; high_memory = NULL; @@ -323,4 +334,12 @@ int memory_add_physaddr_to_nid(u64 addr) } EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); #endif + #endif /* CONFIG_MEMORY_HOTPLUG */ + +#ifdef CONFIG_PMB +int __in_29bit_mode(void) +{ + return !(ctrl_inl(PMB_PASCR) & PASCR_SE); +} +#endif /* CONFIG_PMB */ diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c index 16e01b5fed04..15d74ea42094 100644 --- a/arch/sh/mm/kmap.c +++ b/arch/sh/mm/kmap.c @@ -39,7 +39,9 @@ void *kmap_coherent(struct page *page, unsigned long addr) pagefault_disable(); idx = FIX_CMAP_END - - ((addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT); + (((addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1)) + + (FIX_N_COLOURS * smp_processor_id())); + vaddr = __fix_to_virt(idx); BUG_ON(!pte_none(*(kmap_coherent_pte - idx))); diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c index d2984fa42d3d..afeb710ec5c3 100644 --- a/arch/sh/mm/mmap.c +++ b/arch/sh/mm/mmap.c @@ -54,7 +54,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, /* We do not accept a shared mapping if it would violate * cache aliasing constraints. */ - if ((flags & MAP_SHARED) && (addr & shm_align_mask)) + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) return -EINVAL; return addr; } diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c index 9b784fdb947c..6c524446c0f6 100644 --- a/arch/sh/mm/numa.c +++ b/arch/sh/mm/numa.c @@ -60,7 +60,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) unsigned long bootmem_paddr; /* Don't allow bogus node assignment */ - BUG_ON(nid > MAX_NUMNODES || nid == 0); + BUG_ON(nid > MAX_NUMNODES || nid <= 0); start_pfn = start >> PAGE_SHIFT; end_pfn = end >> PAGE_SHIFT; diff --git a/arch/sh/mm/pmb-fixed.c b/arch/sh/mm/pmb-fixed.c deleted file mode 100644 index 43c8eac4d8a1..000000000000 --- a/arch/sh/mm/pmb-fixed.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/sh/mm/fixed_pmb.c - * - * Copyright (C) 2009 Renesas Solutions Corp. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/io.h> -#include <asm/mmu.h> -#include <asm/mmu_context.h> - -static int __uses_jump_to_uncached fixed_pmb_init(void) -{ - int i; - unsigned long addr, data; - - jump_to_uncached(); - - for (i = 0; i < PMB_ENTRY_MAX; i++) { - addr = PMB_DATA + (i << PMB_E_SHIFT); - data = ctrl_inl(addr); - if (!(data & PMB_V)) - continue; - - if (data & PMB_C) { -#if defined(CONFIG_CACHE_WRITETHROUGH) - data |= PMB_WT; -#elif defined(CONFIG_CACHE_WRITEBACK) - data &= ~PMB_WT; -#else - data &= ~(PMB_C | PMB_WT); -#endif - } - ctrl_outl(data, addr); - } - - back_to_cached(); - - return 0; -} -arch_initcall(fixed_pmb_init); diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index aade31102112..280f6a166035 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -35,29 +35,9 @@ static void __pmb_unmap(struct pmb_entry *); -static struct kmem_cache *pmb_cache; +static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES]; static unsigned long pmb_map; -static struct pmb_entry pmb_init_map[] = { - /* vpn ppn flags (ub/sz/c/wt) */ - - /* P1 Section Mappings */ - { 0x80000000, 0x00000000, PMB_SZ_64M | PMB_C, }, - { 0x84000000, 0x04000000, PMB_SZ_64M | PMB_C, }, - { 0x88000000, 0x08000000, PMB_SZ_128M | PMB_C, }, - { 0x90000000, 0x10000000, PMB_SZ_64M | PMB_C, }, - { 0x94000000, 0x14000000, PMB_SZ_64M | PMB_C, }, - { 0x98000000, 0x18000000, PMB_SZ_64M | PMB_C, }, - - /* P2 Section Mappings */ - { 0xa0000000, 0x00000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, - { 0xa4000000, 0x04000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, - { 0xa8000000, 0x08000000, PMB_UB | PMB_SZ_128M | PMB_WT, }, - { 0xb0000000, 0x10000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, - { 0xb4000000, 0x14000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, - { 0xb8000000, 0x18000000, PMB_UB | PMB_SZ_64M | PMB_WT, }, -}; - static inline unsigned long mk_pmb_entry(unsigned int entry) { return (entry & PMB_E_MASK) << PMB_E_SHIFT; @@ -73,81 +53,68 @@ static inline unsigned long mk_pmb_data(unsigned int entry) return mk_pmb_entry(entry) | PMB_DATA; } -static DEFINE_SPINLOCK(pmb_list_lock); -static struct pmb_entry *pmb_list; - -static inline void pmb_list_add(struct pmb_entry *pmbe) +static int pmb_alloc_entry(void) { - struct pmb_entry **p, *tmp; + unsigned int pos; - p = &pmb_list; - while ((tmp = *p) != NULL) - p = &tmp->next; +repeat: + pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES); - pmbe->next = tmp; - *p = pmbe; -} + if (unlikely(pos > NR_PMB_ENTRIES)) + return -ENOSPC; -static inline void pmb_list_del(struct pmb_entry *pmbe) -{ - struct pmb_entry **p, *tmp; + if (test_and_set_bit(pos, &pmb_map)) + goto repeat; - for (p = &pmb_list; (tmp = *p); p = &tmp->next) - if (tmp == pmbe) { - *p = tmp->next; - return; - } + return pos; } -struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, - unsigned long flags) +static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, + unsigned long flags, int entry) { struct pmb_entry *pmbe; + int pos; + + if (entry == PMB_NO_ENTRY) { + pos = pmb_alloc_entry(); + if (pos < 0) + return ERR_PTR(pos); + } else { + if (test_bit(entry, &pmb_map)) + return ERR_PTR(-ENOSPC); + pos = entry; + } - pmbe = kmem_cache_alloc(pmb_cache, GFP_KERNEL); + pmbe = &pmb_entry_list[pos]; if (!pmbe) return ERR_PTR(-ENOMEM); pmbe->vpn = vpn; pmbe->ppn = ppn; pmbe->flags = flags; - - spin_lock_irq(&pmb_list_lock); - pmb_list_add(pmbe); - spin_unlock_irq(&pmb_list_lock); + pmbe->entry = pos; return pmbe; } -void pmb_free(struct pmb_entry *pmbe) +static void pmb_free(struct pmb_entry *pmbe) { - spin_lock_irq(&pmb_list_lock); - pmb_list_del(pmbe); - spin_unlock_irq(&pmb_list_lock); + int pos = pmbe->entry; - kmem_cache_free(pmb_cache, pmbe); + pmbe->vpn = 0; + pmbe->ppn = 0; + pmbe->flags = 0; + pmbe->entry = 0; + + clear_bit(pos, &pmb_map); } /* * Must be in P2 for __set_pmb_entry() */ -int __set_pmb_entry(unsigned long vpn, unsigned long ppn, - unsigned long flags, int *entry) +static void __set_pmb_entry(unsigned long vpn, unsigned long ppn, + unsigned long flags, int pos) { - unsigned int pos = *entry; - - if (unlikely(pos == PMB_NO_ENTRY)) - pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES); - -repeat: - if (unlikely(pos > NR_PMB_ENTRIES)) - return -ENOSPC; - - if (test_and_set_bit(pos, &pmb_map)) { - pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES); - goto repeat; - } - ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos)); #ifdef CONFIG_CACHE_WRITETHROUGH @@ -161,35 +128,21 @@ repeat: #endif ctrl_outl(ppn | flags | PMB_V, mk_pmb_data(pos)); - - *entry = pos; - - return 0; } -int __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe) +static void __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe) { - int ret; - jump_to_uncached(); - ret = __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &pmbe->entry); + __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, pmbe->entry); back_to_cached(); - - return ret; } -void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe) +static void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe) { unsigned int entry = pmbe->entry; unsigned long addr; - /* - * Don't allow clearing of wired init entries, P1 or P2 access - * without a corresponding mapping in the PMB will lead to reset - * by the TLB. - */ - if (unlikely(entry < ARRAY_SIZE(pmb_init_map) || - entry >= NR_PMB_ENTRIES)) + if (unlikely(entry >= NR_PMB_ENTRIES)) return; jump_to_uncached(); @@ -202,8 +155,6 @@ void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe) ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr); back_to_cached(); - - clear_bit(entry, &pmb_map); } @@ -239,23 +190,17 @@ long pmb_remap(unsigned long vaddr, unsigned long phys, again: for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) { - int ret; - if (size < pmb_sizes[i].size) continue; - pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag); + pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag, + PMB_NO_ENTRY); if (IS_ERR(pmbe)) { err = PTR_ERR(pmbe); goto out; } - ret = set_pmb_entry(pmbe); - if (ret != 0) { - pmb_free(pmbe); - err = -EBUSY; - goto out; - } + set_pmb_entry(pmbe); phys += pmb_sizes[i].size; vaddr += pmb_sizes[i].size; @@ -292,11 +237,16 @@ out: void pmb_unmap(unsigned long addr) { - struct pmb_entry **p, *pmbe; + struct pmb_entry *pmbe = NULL; + int i; - for (p = &pmb_list; (pmbe = *p); p = &pmbe->next) - if (pmbe->vpn == addr) - break; + for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) { + if (test_bit(i, &pmb_map)) { + pmbe = &pmb_entry_list[i]; + if (pmbe->vpn == addr) + break; + } + } if (unlikely(!pmbe)) return; @@ -306,13 +256,22 @@ void pmb_unmap(unsigned long addr) static void __pmb_unmap(struct pmb_entry *pmbe) { - WARN_ON(!test_bit(pmbe->entry, &pmb_map)); + BUG_ON(!test_bit(pmbe->entry, &pmb_map)); do { struct pmb_entry *pmblink = pmbe; - if (pmbe->entry != PMB_NO_ENTRY) - clear_pmb_entry(pmbe); + /* + * We may be called before this pmb_entry has been + * entered into the PMB table via set_pmb_entry(), but + * that's OK because we've allocated a unique slot for + * this entry in pmb_alloc() (even if we haven't filled + * it yet). + * + * Therefore, calling clear_pmb_entry() is safe as no + * other mapping can be using that slot. + */ + clear_pmb_entry(pmbe); pmbe = pmblink->link; @@ -320,42 +279,34 @@ static void __pmb_unmap(struct pmb_entry *pmbe) } while (pmbe); } -static void pmb_cache_ctor(void *pmb) +#ifdef CONFIG_PMB +int __uses_jump_to_uncached pmb_init(void) { - struct pmb_entry *pmbe = pmb; - - memset(pmb, 0, sizeof(struct pmb_entry)); - - pmbe->entry = PMB_NO_ENTRY; -} - -static int __uses_jump_to_uncached pmb_init(void) -{ - unsigned int nr_entries = ARRAY_SIZE(pmb_init_map); - unsigned int entry, i; - - BUG_ON(unlikely(nr_entries >= NR_PMB_ENTRIES)); - - pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry), 0, - SLAB_PANIC, pmb_cache_ctor); + unsigned int i; + long size, ret; jump_to_uncached(); /* - * Ordering is important, P2 must be mapped in the PMB before we - * can set PMB.SE, and P1 must be mapped before we jump back to - * P1 space. + * Insert PMB entries for the P1 and P2 areas so that, after + * we've switched the MMU to 32-bit mode, the semantics of P1 + * and P2 are the same as in 29-bit mode, e.g. + * + * P1 - provides a cached window onto physical memory + * P2 - provides an uncached window onto physical memory */ - for (entry = 0; entry < nr_entries; entry++) { - struct pmb_entry *pmbe = pmb_init_map + entry; + size = __MEMORY_START + __MEMORY_SIZE; - __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &entry); - } + ret = pmb_remap(P1SEG, 0x00000000, size, PMB_C); + BUG_ON(ret != size); + + ret = pmb_remap(P2SEG, 0x00000000, size, PMB_WT | PMB_UB); + BUG_ON(ret != size); ctrl_outl(0, PMB_IRMCR); /* PMB.SE and UB[7] */ - ctrl_outl((1 << 31) | (1 << 7), PMB_PASCR); + ctrl_outl(PASCR_SE | (1 << 7), PMB_PASCR); /* Flush out the TLB */ i = ctrl_inl(MMUCR); @@ -366,7 +317,53 @@ static int __uses_jump_to_uncached pmb_init(void) return 0; } -arch_initcall(pmb_init); +#else +int __uses_jump_to_uncached pmb_init(void) +{ + int i; + unsigned long addr, data; + + jump_to_uncached(); + + for (i = 0; i < PMB_ENTRY_MAX; i++) { + struct pmb_entry *pmbe; + unsigned long vpn, ppn, flags; + + addr = PMB_DATA + (i << PMB_E_SHIFT); + data = ctrl_inl(addr); + if (!(data & PMB_V)) + continue; + + if (data & PMB_C) { +#if defined(CONFIG_CACHE_WRITETHROUGH) + data |= PMB_WT; +#elif defined(CONFIG_CACHE_WRITEBACK) + data &= ~PMB_WT; +#else + data &= ~(PMB_C | PMB_WT); +#endif + } + ctrl_outl(data, addr); + + ppn = data & PMB_PFN_MASK; + + flags = data & (PMB_C | PMB_WT | PMB_UB); + flags |= data & PMB_SZ_MASK; + + addr = PMB_ADDR + (i << PMB_E_SHIFT); + data = ctrl_inl(addr); + + vpn = data & PMB_PFN_MASK; + + pmbe = pmb_alloc(vpn, ppn, flags, i); + WARN_ON(IS_ERR(pmbe)); + } + + back_to_cached(); + + return 0; +} +#endif /* CONFIG_PMB */ static int pmb_seq_show(struct seq_file *file, void *iter) { @@ -434,15 +431,18 @@ postcore_initcall(pmb_debugfs_init); static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state) { static pm_message_t prev_state; + int i; /* Restore the PMB after a resume from hibernation */ if (state.event == PM_EVENT_ON && prev_state.event == PM_EVENT_FREEZE) { struct pmb_entry *pmbe; - spin_lock_irq(&pmb_list_lock); - for (pmbe = pmb_list; pmbe; pmbe = pmbe->next) - set_pmb_entry(pmbe); - spin_unlock_irq(&pmb_list_lock); + for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) { + if (test_bit(i, &pmb_map)) { + pmbe = &pmb_entry_list[i]; + set_pmb_entry(pmbe); + } + } } prev_state = state; return 0; diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile index 8e6eec91c14c..4886c5c1786c 100644 --- a/arch/sh/oprofile/Makefile +++ b/arch/sh/oprofile/Makefile @@ -7,7 +7,3 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ timer_int.o ) oprofile-y := $(DRIVER_OBJS) common.o backtrace.o - -oprofile-$(CONFIG_CPU_SUBTYPE_SH7750S) += op_model_sh7750.o -oprofile-$(CONFIG_CPU_SUBTYPE_SH7750) += op_model_sh7750.o -oprofile-$(CONFIG_CPU_SUBTYPE_SH7091) += op_model_sh7750.o diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c index 44f4e31c6d63..ac604937f3ee 100644 --- a/arch/sh/oprofile/common.c +++ b/arch/sh/oprofile/common.c @@ -20,9 +20,6 @@ #include <asm/processor.h> #include "op_impl.h" -extern struct op_sh_model op_model_sh7750_ops __weak; -extern struct op_sh_model op_model_sh4a_ops __weak; - static struct op_sh_model *model; static struct op_counter_config ctr[20]; @@ -94,33 +91,14 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) */ ops->backtrace = sh_backtrace; - switch (current_cpu_data.type) { - /* SH-4 types */ - case CPU_SH7750: - case CPU_SH7750S: - lmodel = &op_model_sh7750_ops; - break; - - /* SH-4A types */ - case CPU_SH7763: - case CPU_SH7770: - case CPU_SH7780: - case CPU_SH7781: - case CPU_SH7785: - case CPU_SH7786: - case CPU_SH7723: - case CPU_SH7724: - case CPU_SHX3: - lmodel = &op_model_sh4a_ops; - break; - - /* SH4AL-DSP types */ - case CPU_SH7343: - case CPU_SH7722: - case CPU_SH7366: - lmodel = &op_model_sh4a_ops; - break; - } + /* + * XXX + * + * All of the SH7750/SH-4A counters have been converted to perf, + * this infrastructure hook is left for other users until they've + * had a chance to convert over, at which point all of this + * will be deleted. + */ if (!lmodel) return -ENODEV; diff --git a/arch/sh/oprofile/op_impl.h b/arch/sh/oprofile/op_impl.h index 4d509975eba6..1244479ceb29 100644 --- a/arch/sh/oprofile/op_impl.h +++ b/arch/sh/oprofile/op_impl.h @@ -6,7 +6,7 @@ struct op_counter_config { unsigned long enabled; unsigned long event; - unsigned long long count; + unsigned long count; /* Dummy values for userspace tool compliance */ unsigned long kernel; diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c deleted file mode 100644 index c892c7c30c2f..000000000000 --- a/arch/sh/oprofile/op_model_sh7750.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * arch/sh/oprofile/op_model_sh7750.c - * - * OProfile support for SH7750/SH7750S Performance Counters - * - * Copyright (C) 2003 - 2008 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/kernel.h> -#include <linux/oprofile.h> -#include <linux/profile.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/fs.h> -#include "op_impl.h" - -#define PM_CR_BASE 0xff000084 /* 16-bit */ -#define PM_CTR_BASE 0xff100004 /* 32-bit */ - -#define PMCR(n) (PM_CR_BASE + ((n) * 0x04)) -#define PMCTRH(n) (PM_CTR_BASE + 0x00 + ((n) * 0x08)) -#define PMCTRL(n) (PM_CTR_BASE + 0x04 + ((n) * 0x08)) - -#define PMCR_PMM_MASK 0x0000003f - -#define PMCR_CLKF 0x00000100 -#define PMCR_PMCLR 0x00002000 -#define PMCR_PMST 0x00004000 -#define PMCR_PMEN 0x00008000 - -struct op_sh_model op_model_sh7750_ops; - -#define NR_CNTRS 2 - -static struct sh7750_ppc_register_config { - unsigned int ctrl; - unsigned long cnt_hi; - unsigned long cnt_lo; -} regcache[NR_CNTRS]; - -/* - * There are a number of events supported by each counter (33 in total). - * Since we have 2 counters, each counter will take the event code as it - * corresponds to the PMCR PMM setting. Each counter can be configured - * independently. - * - * Event Code Description - * ---------- ----------- - * - * 0x01 Operand read access - * 0x02 Operand write access - * 0x03 UTLB miss - * 0x04 Operand cache read miss - * 0x05 Operand cache write miss - * 0x06 Instruction fetch (w/ cache) - * 0x07 Instruction TLB miss - * 0x08 Instruction cache miss - * 0x09 All operand accesses - * 0x0a All instruction accesses - * 0x0b OC RAM operand access - * 0x0d On-chip I/O space access - * 0x0e Operand access (r/w) - * 0x0f Operand cache miss (r/w) - * 0x10 Branch instruction - * 0x11 Branch taken - * 0x12 BSR/BSRF/JSR - * 0x13 Instruction execution - * 0x14 Instruction execution in parallel - * 0x15 FPU Instruction execution - * 0x16 Interrupt - * 0x17 NMI - * 0x18 trapa instruction execution - * 0x19 UBCA match - * 0x1a UBCB match - * 0x21 Instruction cache fill - * 0x22 Operand cache fill - * 0x23 Elapsed time - * 0x24 Pipeline freeze by I-cache miss - * 0x25 Pipeline freeze by D-cache miss - * 0x27 Pipeline freeze by branch instruction - * 0x28 Pipeline freeze by CPU register - * 0x29 Pipeline freeze by FPU - * - * Unfortunately we don't have a native exception or interrupt for counter - * overflow (although since these counters can run for 16.3 days without - * overflowing, it's not really necessary). - * - * OProfile on the other hand likes to have samples taken periodically, so - * for now we just piggyback the timer interrupt to get the expected - * behavior. - */ - -static int sh7750_timer_notify(struct pt_regs *regs) -{ - oprofile_add_sample(regs, 0); - return 0; -} - -static u64 sh7750_read_counter(int counter) -{ - return (u64)((u64)(__raw_readl(PMCTRH(counter)) & 0xffff) << 32) | - __raw_readl(PMCTRL(counter)); -} - -/* - * Files will be in a path like: - * - * /<oprofilefs mount point>/<counter number>/<file> - * - * So when dealing with <file>, we look to the parent dentry for the counter - * number. - */ -static inline int to_counter(struct file *file) -{ - const unsigned char *name = file->f_path.dentry->d_parent->d_name.name; - - return (int)simple_strtol(name, NULL, 10); -} - -/* - * XXX: We have 48-bit counters, so we're probably going to want something - * more along the lines of oprofilefs_ullong_to_user().. Truncating to - * unsigned long works fine for now though, as long as we don't attempt to - * profile for too horribly long. - */ -static ssize_t sh7750_read_count(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - int counter = to_counter(file); - u64 val = sh7750_read_counter(counter); - - return oprofilefs_ulong_to_user((unsigned long)val, buf, count, ppos); -} - -static ssize_t sh7750_write_count(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) -{ - int counter = to_counter(file); - unsigned long val; - - if (oprofilefs_ulong_from_user(&val, buf, count)) - return -EFAULT; - - /* - * Any write will clear the counter, although only 0 should be - * written for this purpose, as we do not support setting the - * counter to an arbitrary value. - */ - WARN_ON(val != 0); - - __raw_writew(__raw_readw(PMCR(counter)) | PMCR_PMCLR, PMCR(counter)); - - return count; -} - -static const struct file_operations count_fops = { - .read = sh7750_read_count, - .write = sh7750_write_count, -}; - -static int sh7750_ppc_create_files(struct super_block *sb, struct dentry *dir) -{ - return oprofilefs_create_file(sb, dir, "count", &count_fops); -} - -static void sh7750_ppc_reg_setup(struct op_counter_config *ctr) -{ - unsigned int counters = op_model_sh7750_ops.num_counters; - int i; - - for (i = 0; i < counters; i++) { - regcache[i].ctrl = 0; - regcache[i].cnt_hi = 0; - regcache[i].cnt_lo = 0; - - if (!ctr[i].enabled) - continue; - - regcache[i].ctrl |= ctr[i].event | PMCR_PMEN | PMCR_PMST; - regcache[i].cnt_hi = (unsigned long)((ctr->count >> 32) & 0xffff); - regcache[i].cnt_lo = (unsigned long)(ctr->count & 0xffffffff); - } -} - -static void sh7750_ppc_cpu_setup(void *args) -{ - unsigned int counters = op_model_sh7750_ops.num_counters; - int i; - - for (i = 0; i < counters; i++) { - __raw_writew(0, PMCR(i)); - __raw_writel(regcache[i].cnt_hi, PMCTRH(i)); - __raw_writel(regcache[i].cnt_lo, PMCTRL(i)); - } -} - -static void sh7750_ppc_cpu_start(void *args) -{ - unsigned int counters = op_model_sh7750_ops.num_counters; - int i; - - for (i = 0; i < counters; i++) - __raw_writew(regcache[i].ctrl, PMCR(i)); -} - -static void sh7750_ppc_cpu_stop(void *args) -{ - unsigned int counters = op_model_sh7750_ops.num_counters; - int i; - - /* Disable the counters */ - for (i = 0; i < counters; i++) - __raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i)); -} - -static inline void sh7750_ppc_reset(void) -{ - unsigned int counters = op_model_sh7750_ops.num_counters; - int i; - - /* Clear the counters */ - for (i = 0; i < counters; i++) - __raw_writew(__raw_readw(PMCR(i)) | PMCR_PMCLR, PMCR(i)); -} - -static int sh7750_ppc_init(void) -{ - sh7750_ppc_reset(); - - return register_timer_hook(sh7750_timer_notify); -} - -static void sh7750_ppc_exit(void) -{ - unregister_timer_hook(sh7750_timer_notify); - - sh7750_ppc_reset(); -} - -struct op_sh_model op_model_sh7750_ops = { - .cpu_type = "sh/sh7750", - .num_counters = NR_CNTRS, - .reg_setup = sh7750_ppc_reg_setup, - .cpu_setup = sh7750_ppc_cpu_setup, - .cpu_start = sh7750_ppc_cpu_start, - .cpu_stop = sh7750_ppc_cpu_stop, - .init = sh7750_ppc_init, - .exit = sh7750_ppc_exit, - .create_files = sh7750_ppc_create_files, -}; diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h index d4d9c9d852c3..3b9cfb39175e 100644 --- a/arch/sparc/include/asm/fcntl.h +++ b/arch/sparc/include/asm/fcntl.h @@ -1,14 +1,12 @@ #ifndef _SPARC_FCNTL_H #define _SPARC_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ #define O_APPEND 0x0008 #define FASYNC 0x0040 /* fcntl, for BSD compatibility */ #define O_CREAT 0x0200 /* not fcntl */ #define O_TRUNC 0x0400 /* not fcntl */ #define O_EXCL 0x0800 /* not fcntl */ -#define O_SYNC 0x2000 +#define O_DSYNC 0x2000 /* used to be O_SYNC, see below */ #define O_NONBLOCK 0x4000 #if defined(__sparc__) && defined(__arch64__) #define O_NDELAY 0x0004 @@ -20,6 +18,21 @@ #define O_DIRECT 0x100000 /* direct disk access hint */ #define O_NOATIME 0x200000 #define O_CLOEXEC 0x400000 +/* + * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * the O_SYNC flag. We continue to use the existing numerical value + * for O_DSYNC semantics now, but using the correct symbolic name for it. + * This new value is used to request true Posix O_SYNC semantics. It is + * defined in this strange way to make sure applications compiled against + * new headers get at least O_DSYNC semantics on older kernels. + * + * This has the nice side-effect that we can simply test for O_DSYNC + * wherever we do not care if O_DSYNC or O_SYNC is used. + * + * Note: __O_SYNC must never be used directly. + */ +#define __O_SYNC 0x800000 +#define O_SYNC (__O_SYNC|O_DSYNC) #define F_GETOWN 5 /* for sockets. */ #define F_SETOWN 6 /* for sockets. */ diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h index b63e51c3c3ee..b0576df6ec83 100644 --- a/arch/sparc/include/asm/pci_64.h +++ b/arch/sparc/include/asm/pci_64.h @@ -16,8 +16,6 @@ #define PCI_IRQ_NONE 0xffffffff -#define PCI_CACHE_LINE_BYTES 64 - static inline void pcibios_set_master(struct pci_dev *dev) { /* No special bus mastering setup handling */ diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index c68648662802..b85374f7cf94 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -1081,3 +1081,10 @@ void pci_resource_to_user(const struct pci_dev *pdev, int bar, *start = rp->start - offset; *end = rp->end - offset; } + +static int __init pcibios_init(void) +{ + pci_dfl_cache_line_size = 64 >> 2; + return 0; +} +subsys_initcall(pcibios_init); diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c index 00abe87e5b51..dc0ac197e7e2 100644 --- a/arch/sparc/kernel/sys_sparc32.c +++ b/arch/sparc/kernel/sys_sparc32.c @@ -564,28 +564,6 @@ asmlinkage long sparc32_open(const char __user *filename, return do_sys_open(AT_FDCWD, filename, flags, mode); } -extern unsigned long do_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr); - -asmlinkage unsigned long sys32_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, u32 __new_addr) -{ - unsigned long ret = -EINVAL; - unsigned long new_addr = __new_addr; - - if (unlikely(sparc_mmap_check(addr, old_len))) - goto out; - if (unlikely(sparc_mmap_check(new_addr, new_len))) - goto out; - down_write(¤t->mm->mmap_sem); - ret = do_mremap(addr, old_len, new_len, flags, new_addr); - up_write(¤t->mm->mmap_sem); -out: - return ret; -} - long sys32_lookup_dcookie(unsigned long cookie_high, unsigned long cookie_low, char __user *buf, size_t len) diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c index 03035c852a43..3a82e65d8db2 100644 --- a/arch/sparc/kernel/sys_sparc_32.c +++ b/arch/sparc/kernel/sys_sparc_32.c @@ -45,7 +45,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi /* We do not accept a shared mapping if it would violate * cache aliasing constraints. */ - if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1))) + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))) return -EINVAL; return addr; } @@ -79,15 +80,6 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi } } -asmlinkage unsigned long sparc_brk(unsigned long brk) -{ - if(ARCH_SUN4C) { - if ((brk & 0xe0000000) != (current->mm->brk & 0xe0000000)) - return current->mm->brk; - } - return sys_brk(brk); -} - /* * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. @@ -234,31 +226,6 @@ int sparc_mmap_check(unsigned long addr, unsigned long len) } /* Linux version of mmap */ -static unsigned long do_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, unsigned long fd, - unsigned long pgoff) -{ - struct file * file = NULL; - unsigned long retval = -EBADF; - - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - len = PAGE_ALIGN(len); - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return retval; -} asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, @@ -266,14 +233,16 @@ asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len, { /* Make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE we have. */ - return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT - 12)); + return sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); } asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long off) { - return do_mmap2(addr, len, prot, flags, fd, off >> PAGE_SHIFT); + /* no alignment check? */ + return sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); } long sparc_remap_file_pages(unsigned long start, unsigned long size, @@ -287,27 +256,6 @@ long sparc_remap_file_pages(unsigned long start, unsigned long size, (pgoff >> (PAGE_SHIFT - 12)), flags); } -extern unsigned long do_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr); - -asmlinkage unsigned long sparc_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr) -{ - unsigned long ret = -EINVAL; - - if (unlikely(sparc_mmap_check(addr, old_len))) - goto out; - if (unlikely(sparc_mmap_check(new_addr, new_len))) - goto out; - down_write(¤t->mm->mmap_sem); - ret = do_mremap(addr, old_len, new_len, flags, new_addr); - up_write(¤t->mm->mmap_sem); -out: - return ret; -} - /* we come to here via sys_nis_syscall so it can setup the regs argument */ asmlinkage unsigned long c_sys_nis_syscall (struct pt_regs *regs) diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index e2d102447a43..cfa0e19abe3b 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -317,10 +317,14 @@ bottomup: unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, unsigned long len, unsigned long pgoff, unsigned long flags) { unsigned long align_goal, addr = -ENOMEM; + unsigned long (*get_area)(struct file *, unsigned long, + unsigned long, unsigned long, unsigned long); + + get_area = current->mm->get_unmapped_area; if (flags & MAP_FIXED) { /* Ok, don't mess with it. */ - return get_unmapped_area(NULL, orig_addr, len, pgoff, flags); + return get_area(NULL, orig_addr, len, pgoff, flags); } flags &= ~MAP_SHARED; @@ -333,7 +337,7 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u align_goal = (64UL * 1024); do { - addr = get_unmapped_area(NULL, orig_addr, len + (align_goal - PAGE_SIZE), pgoff, flags); + addr = get_area(NULL, orig_addr, len + (align_goal - PAGE_SIZE), pgoff, flags); if (!(addr & ~PAGE_MASK)) { addr = (addr + (align_goal - 1UL)) & ~(align_goal - 1UL); break; @@ -351,7 +355,7 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u * be obtained. */ if (addr & ~PAGE_MASK) - addr = get_unmapped_area(NULL, orig_addr, len, pgoff, flags); + addr = get_area(NULL, orig_addr, len, pgoff, flags); return addr; } @@ -399,18 +403,6 @@ void arch_pick_mmap_layout(struct mm_struct *mm) } } -SYSCALL_DEFINE1(sparc_brk, unsigned long, brk) -{ - /* People could try to be nasty and use ta 0x6d in 32bit programs */ - if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32) - return current->mm->brk; - - if (unlikely(straddles_64bit_va_hole(current->mm->brk, brk))) - return current->mm->brk; - - return sys_brk(brk); -} - /* * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. @@ -568,23 +560,13 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, off) { - struct file * file = NULL; - unsigned long retval = -EBADF; - - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - len = PAGE_ALIGN(len); + unsigned long retval = -EINVAL; - down_write(¤t->mm->mmap_sem); - retval = do_mmap(file, addr, len, prot, flags, off); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); + if ((off + PAGE_ALIGN(len)) < off) + goto out; + if (off & ~PAGE_MASK) + goto out; + retval = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); out: return retval; } @@ -614,12 +596,6 @@ SYSCALL_DEFINE5(64_mremap, unsigned long, addr, unsigned long, old_len, if (test_thread_flag(TIF_32BIT)) goto out; - if (unlikely(new_len >= VA_EXCLUDE_START)) - goto out; - if (unlikely(sparc_mmap_check(addr, old_len))) - goto out; - if (unlikely(sparc_mmap_check(new_addr, new_len))) - goto out; down_write(¤t->mm->mmap_sem); ret = do_mremap(addr, old_len, new_len, flags, new_addr); diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h index a63c5d2d9849..d2f999ae2b85 100644 --- a/arch/sparc/kernel/systbls.h +++ b/arch/sparc/kernel/systbls.h @@ -9,7 +9,6 @@ struct new_utsname; extern asmlinkage unsigned long sys_getpagesize(void); -extern asmlinkage unsigned long sparc_brk(unsigned long brk); extern asmlinkage long sparc_pipe(struct pt_regs *regs); extern asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index ceb1530f8aa6..801fc8e5a0e8 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -19,7 +19,7 @@ sys_call_table: /*0*/ .long sys_restart_syscall, sys_exit, sys_fork, sys_read, sys_write /*5*/ .long sys_open, sys_close, sys_wait4, sys_creat, sys_link /*10*/ .long sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys_mknod -/*15*/ .long sys_chmod, sys_lchown16, sparc_brk, sys_nis_syscall, sys_lseek +/*15*/ .long sys_chmod, sys_lchown16, sys_brk, sys_nis_syscall, sys_lseek /*20*/ .long sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 /*25*/ .long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause /*30*/ .long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice @@ -67,7 +67,7 @@ sys_call_table: /*235*/ .long sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall /*240*/ .long sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler /*245*/ .long sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep -/*250*/ .long sparc_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl +/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl /*255*/ .long sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep /*260*/ .long sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun /*265*/ .long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index cc8e7862e95a..e575b46bd7a9 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -21,7 +21,7 @@ sys_call_table32: /*0*/ .word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write /*5*/ .word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link /*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod -/*15*/ .word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek +/*15*/ .word sys_chmod, sys_lchown16, sys_brk, sys32_perfctr, sys32_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 /*25*/ .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause /*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice @@ -68,7 +68,7 @@ sys_call_table32: .word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall /*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler .word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep -/*250*/ .word sys32_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl +/*250*/ .word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl .word sys32_sync_file_range, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep /*260*/ .word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun .word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy @@ -96,7 +96,7 @@ sys_call_table: /*0*/ .word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write /*5*/ .word sys_open, sys_close, sys_wait4, sys_creat, sys_link /*10*/ .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod -/*15*/ .word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek +/*15*/ .word sys_chmod, sys_lchown, sys_brk, sys_perfctr, sys_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid /*25*/ .word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall /*30*/ .word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c index da1218e8ee87..63f73ae8a892 100644 --- a/arch/sparc/kernel/time_64.c +++ b/arch/sparc/kernel/time_64.c @@ -847,7 +847,7 @@ void __init time_init(void) sparc64_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &sparc64_clockevent); - printk("clockevent: mult[%lx] shift[%d]\n", + printk("clockevent: mult[%ux] shift[%d]\n", sparc64_clockevent.mult, sparc64_clockevent.shift); setup_sparc64_timer(); diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c index eb240323c40a..d22f9e5c0eac 100644 --- a/arch/um/drivers/mmapper_kern.c +++ b/arch/um/drivers/mmapper_kern.c @@ -16,7 +16,7 @@ #include <linux/miscdevice.h> #include <linux/module.h> #include <linux/mm.h> -#include <linux/smp_lock.h> + #include <asm/uaccess.h> #include "mem_user.h" @@ -78,7 +78,6 @@ out: static int mmapper_open(struct inode *inode, struct file *file) { - cycle_kernel_lock(); return 0; } @@ -115,18 +114,16 @@ static int __init mmapper_init(void) v_buf = (char *) find_iomem("mmapper", &mmapper_size); if (mmapper_size == 0) { printk(KERN_ERR "mmapper_init - find_iomem failed\n"); - goto out; + return -ENODEV; } + p_buf = __pa(v_buf); err = misc_register(&mmapper_dev); if (err) { printk(KERN_ERR "mmapper - misc_register failed, err = %d\n", err); - goto out; + return err;; } - - p_buf = __pa(v_buf); -out: return 0; } diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index 6eabb7022a2d..4949044773ba 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -7,7 +7,6 @@ * of the GNU General Public License, incorporated herein by reference. */ #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/module.h> #include <linux/fs.h> #include <linux/interrupt.h> @@ -34,8 +33,6 @@ static DECLARE_WAIT_QUEUE_HEAD(host_read_wait); static int rng_dev_open (struct inode *inode, struct file *filp) { - cycle_kernel_lock(); - /* enforce read-only access to this chrdev */ if ((filp->f_mode & FMODE_READ) == 0) return -EINVAL; diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c index a4625c7b2bf9..cccab850c27e 100644 --- a/arch/um/kernel/syscall.c +++ b/arch/um/kernel/syscall.c @@ -8,6 +8,7 @@ #include "linux/mm.h" #include "linux/sched.h" #include "linux/utsname.h" +#include "linux/syscalls.h" #include "asm/current.h" #include "asm/mman.h" #include "asm/uaccess.h" @@ -37,31 +38,6 @@ long sys_vfork(void) return ret; } -/* common code for old and new mmaps */ -long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - long error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - out: - return error; -} - long old_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long offset) @@ -70,7 +46,7 @@ long old_mmap(unsigned long addr, unsigned long len, if (offset & ~PAGE_MASK) goto out; - err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + err = sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); out: return err; } diff --git a/arch/um/sys-i386/shared/sysdep/syscalls.h b/arch/um/sys-i386/shared/sysdep/syscalls.h index 905698197e35..e7787679e317 100644 --- a/arch/um/sys-i386/shared/sysdep/syscalls.h +++ b/arch/um/sys-i386/shared/sysdep/syscalls.h @@ -20,7 +20,3 @@ extern syscall_handler_t *sys_call_table[]; #define EXECUTE_SYSCALL(syscall, regs) \ ((long (*)(struct syscall_args)) \ (*sys_call_table[syscall]))(SYSCALL_ARGS(®s->regs)) - -extern long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff); diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 731318e5ac1d..bc01e3ebfeb2 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -187,8 +187,8 @@ config HAVE_MMIOTRACE_SUPPORT def_bool y config X86_DECODER_SELFTEST - bool "x86 instruction decoder selftest" - depends on DEBUG_KERNEL + bool "x86 instruction decoder selftest" + depends on DEBUG_KERNEL && KPROBES ---help--- Perform x86 instruction decoder selftests at build time. This option is useful for checking the sanity of x86 instruction diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index cfb0010fa940..1a58ad89fdf7 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o +obj-$(CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL) += ghash-clmulni-intel.o obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o @@ -24,3 +25,5 @@ twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o + +ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S index eb0566e83319..20bb0e1ac681 100644 --- a/arch/x86/crypto/aesni-intel_asm.S +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -16,6 +16,7 @@ */ #include <linux/linkage.h> +#include <asm/inst.h> .text @@ -122,103 +123,72 @@ ENTRY(aesni_set_key) movups 0x10(%rsi), %xmm2 # other user key movaps %xmm2, (%rcx) add $0x10, %rcx - # aeskeygenassist $0x1, %xmm2, %xmm1 # round 1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01 + AESKEYGENASSIST 0x1 %xmm2 %xmm1 # round 1 call _key_expansion_256a - # aeskeygenassist $0x1, %xmm0, %xmm1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01 + AESKEYGENASSIST 0x1 %xmm0 %xmm1 call _key_expansion_256b - # aeskeygenassist $0x2, %xmm2, %xmm1 # round 2 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02 + AESKEYGENASSIST 0x2 %xmm2 %xmm1 # round 2 call _key_expansion_256a - # aeskeygenassist $0x2, %xmm0, %xmm1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02 + AESKEYGENASSIST 0x2 %xmm0 %xmm1 call _key_expansion_256b - # aeskeygenassist $0x4, %xmm2, %xmm1 # round 3 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04 + AESKEYGENASSIST 0x4 %xmm2 %xmm1 # round 3 call _key_expansion_256a - # aeskeygenassist $0x4, %xmm0, %xmm1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04 + AESKEYGENASSIST 0x4 %xmm0 %xmm1 call _key_expansion_256b - # aeskeygenassist $0x8, %xmm2, %xmm1 # round 4 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08 + AESKEYGENASSIST 0x8 %xmm2 %xmm1 # round 4 call _key_expansion_256a - # aeskeygenassist $0x8, %xmm0, %xmm1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08 + AESKEYGENASSIST 0x8 %xmm0 %xmm1 call _key_expansion_256b - # aeskeygenassist $0x10, %xmm2, %xmm1 # round 5 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10 + AESKEYGENASSIST 0x10 %xmm2 %xmm1 # round 5 call _key_expansion_256a - # aeskeygenassist $0x10, %xmm0, %xmm1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10 + AESKEYGENASSIST 0x10 %xmm0 %xmm1 call _key_expansion_256b - # aeskeygenassist $0x20, %xmm2, %xmm1 # round 6 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20 + AESKEYGENASSIST 0x20 %xmm2 %xmm1 # round 6 call _key_expansion_256a - # aeskeygenassist $0x20, %xmm0, %xmm1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20 + AESKEYGENASSIST 0x20 %xmm0 %xmm1 call _key_expansion_256b - # aeskeygenassist $0x40, %xmm2, %xmm1 # round 7 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40 + AESKEYGENASSIST 0x40 %xmm2 %xmm1 # round 7 call _key_expansion_256a jmp .Ldec_key .Lenc_key192: movq 0x10(%rsi), %xmm2 # other user key - # aeskeygenassist $0x1, %xmm2, %xmm1 # round 1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01 + AESKEYGENASSIST 0x1 %xmm2 %xmm1 # round 1 call _key_expansion_192a - # aeskeygenassist $0x2, %xmm2, %xmm1 # round 2 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02 + AESKEYGENASSIST 0x2 %xmm2 %xmm1 # round 2 call _key_expansion_192b - # aeskeygenassist $0x4, %xmm2, %xmm1 # round 3 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04 + AESKEYGENASSIST 0x4 %xmm2 %xmm1 # round 3 call _key_expansion_192a - # aeskeygenassist $0x8, %xmm2, %xmm1 # round 4 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08 + AESKEYGENASSIST 0x8 %xmm2 %xmm1 # round 4 call _key_expansion_192b - # aeskeygenassist $0x10, %xmm2, %xmm1 # round 5 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10 + AESKEYGENASSIST 0x10 %xmm2 %xmm1 # round 5 call _key_expansion_192a - # aeskeygenassist $0x20, %xmm2, %xmm1 # round 6 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20 + AESKEYGENASSIST 0x20 %xmm2 %xmm1 # round 6 call _key_expansion_192b - # aeskeygenassist $0x40, %xmm2, %xmm1 # round 7 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40 + AESKEYGENASSIST 0x40 %xmm2 %xmm1 # round 7 call _key_expansion_192a - # aeskeygenassist $0x80, %xmm2, %xmm1 # round 8 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x80 + AESKEYGENASSIST 0x80 %xmm2 %xmm1 # round 8 call _key_expansion_192b jmp .Ldec_key .Lenc_key128: - # aeskeygenassist $0x1, %xmm0, %xmm1 # round 1 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01 + AESKEYGENASSIST 0x1 %xmm0 %xmm1 # round 1 call _key_expansion_128 - # aeskeygenassist $0x2, %xmm0, %xmm1 # round 2 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02 + AESKEYGENASSIST 0x2 %xmm0 %xmm1 # round 2 call _key_expansion_128 - # aeskeygenassist $0x4, %xmm0, %xmm1 # round 3 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04 + AESKEYGENASSIST 0x4 %xmm0 %xmm1 # round 3 call _key_expansion_128 - # aeskeygenassist $0x8, %xmm0, %xmm1 # round 4 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08 + AESKEYGENASSIST 0x8 %xmm0 %xmm1 # round 4 call _key_expansion_128 - # aeskeygenassist $0x10, %xmm0, %xmm1 # round 5 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10 + AESKEYGENASSIST 0x10 %xmm0 %xmm1 # round 5 call _key_expansion_128 - # aeskeygenassist $0x20, %xmm0, %xmm1 # round 6 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20 + AESKEYGENASSIST 0x20 %xmm0 %xmm1 # round 6 call _key_expansion_128 - # aeskeygenassist $0x40, %xmm0, %xmm1 # round 7 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x40 + AESKEYGENASSIST 0x40 %xmm0 %xmm1 # round 7 call _key_expansion_128 - # aeskeygenassist $0x80, %xmm0, %xmm1 # round 8 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x80 + AESKEYGENASSIST 0x80 %xmm0 %xmm1 # round 8 call _key_expansion_128 - # aeskeygenassist $0x1b, %xmm0, %xmm1 # round 9 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x1b + AESKEYGENASSIST 0x1b %xmm0 %xmm1 # round 9 call _key_expansion_128 - # aeskeygenassist $0x36, %xmm0, %xmm1 # round 10 - .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x36 + AESKEYGENASSIST 0x36 %xmm0 %xmm1 # round 10 call _key_expansion_128 .Ldec_key: sub $0x10, %rcx @@ -231,8 +201,7 @@ ENTRY(aesni_set_key) .align 4 .Ldec_key_loop: movaps (%rdi), %xmm0 - # aesimc %xmm0, %xmm1 - .byte 0x66, 0x0f, 0x38, 0xdb, 0xc8 + AESIMC %xmm0 %xmm1 movaps %xmm1, (%rsi) add $0x10, %rdi sub $0x10, %rsi @@ -274,51 +243,37 @@ _aesni_enc1: je .Lenc192 add $0x20, TKEYP movaps -0x60(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps -0x50(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE .align 4 .Lenc192: movaps -0x40(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps -0x30(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE .align 4 .Lenc128: movaps -0x20(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps -0x10(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps (TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps 0x10(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps 0x20(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps 0x30(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps 0x40(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps 0x50(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps 0x60(TKEYP), KEY - # aesenc KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + AESENC KEY STATE movaps 0x70(TKEYP), KEY - # aesenclast KEY, STATE # last round - .byte 0x66, 0x0f, 0x38, 0xdd, 0xc2 + AESENCLAST KEY STATE ret /* @@ -353,135 +308,79 @@ _aesni_enc4: je .L4enc192 add $0x20, TKEYP movaps -0x60(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps -0x50(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 #.align 4 .L4enc192: movaps -0x40(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps -0x30(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 #.align 4 .L4enc128: movaps -0x20(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps -0x10(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps (TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps 0x10(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps 0x20(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps 0x30(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps 0x40(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps 0x50(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps 0x60(TKEYP), KEY - # aesenc KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 - # aesenc KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 - # aesenc KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xea - # aesenc KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + AESENC KEY STATE1 + AESENC KEY STATE2 + AESENC KEY STATE3 + AESENC KEY STATE4 movaps 0x70(TKEYP), KEY - # aesenclast KEY, STATE1 # last round - .byte 0x66, 0x0f, 0x38, 0xdd, 0xc2 - # aesenclast KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdd, 0xe2 - # aesenclast KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdd, 0xea - # aesenclast KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdd, 0xf2 + AESENCLAST KEY STATE1 # last round + AESENCLAST KEY STATE2 + AESENCLAST KEY STATE3 + AESENCLAST KEY STATE4 ret /* @@ -518,51 +417,37 @@ _aesni_dec1: je .Ldec192 add $0x20, TKEYP movaps -0x60(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps -0x50(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE .align 4 .Ldec192: movaps -0x40(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps -0x30(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE .align 4 .Ldec128: movaps -0x20(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps -0x10(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps (TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps 0x10(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps 0x20(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps 0x30(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps 0x40(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps 0x50(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps 0x60(TKEYP), KEY - # aesdec KEY, STATE - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + AESDEC KEY STATE movaps 0x70(TKEYP), KEY - # aesdeclast KEY, STATE # last round - .byte 0x66, 0x0f, 0x38, 0xdf, 0xc2 + AESDECLAST KEY STATE ret /* @@ -597,135 +482,79 @@ _aesni_dec4: je .L4dec192 add $0x20, TKEYP movaps -0x60(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps -0x50(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 .align 4 .L4dec192: movaps -0x40(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps -0x30(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 .align 4 .L4dec128: movaps -0x20(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps -0x10(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps (TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps 0x10(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps 0x20(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps 0x30(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps 0x40(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps 0x50(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps 0x60(TKEYP), KEY - # aesdec KEY, STATE1 - .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 - # aesdec KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 - # aesdec KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xde, 0xea - # aesdec KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + AESDEC KEY STATE1 + AESDEC KEY STATE2 + AESDEC KEY STATE3 + AESDEC KEY STATE4 movaps 0x70(TKEYP), KEY - # aesdeclast KEY, STATE1 # last round - .byte 0x66, 0x0f, 0x38, 0xdf, 0xc2 - # aesdeclast KEY, STATE2 - .byte 0x66, 0x0f, 0x38, 0xdf, 0xe2 - # aesdeclast KEY, STATE3 - .byte 0x66, 0x0f, 0x38, 0xdf, 0xea - # aesdeclast KEY, STATE4 - .byte 0x66, 0x0f, 0x38, 0xdf, 0xf2 + AESDECLAST KEY STATE1 # last round + AESDECLAST KEY STATE2 + AESDECLAST KEY STATE3 + AESDECLAST KEY STATE4 ret /* diff --git a/arch/x86/crypto/ghash-clmulni-intel_asm.S b/arch/x86/crypto/ghash-clmulni-intel_asm.S new file mode 100644 index 000000000000..1eb7f90cb7b9 --- /dev/null +++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S @@ -0,0 +1,157 @@ +/* + * Accelerated GHASH implementation with Intel PCLMULQDQ-NI + * instructions. This file contains accelerated part of ghash + * implementation. More information about PCLMULQDQ can be found at: + * + * http://software.intel.com/en-us/articles/carry-less-multiplication-and-its-usage-for-computing-the-gcm-mode/ + * + * Copyright (c) 2009 Intel Corp. + * Author: Huang Ying <ying.huang@intel.com> + * Vinodh Gopal + * Erdinc Ozturk + * Deniz Karakoyunlu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/inst.h> + +.data + +.align 16 +.Lbswap_mask: + .octa 0x000102030405060708090a0b0c0d0e0f +.Lpoly: + .octa 0xc2000000000000000000000000000001 +.Ltwo_one: + .octa 0x00000001000000000000000000000001 + +#define DATA %xmm0 +#define SHASH %xmm1 +#define T1 %xmm2 +#define T2 %xmm3 +#define T3 %xmm4 +#define BSWAP %xmm5 +#define IN1 %xmm6 + +.text + +/* + * __clmul_gf128mul_ble: internal ABI + * input: + * DATA: operand1 + * SHASH: operand2, hash_key << 1 mod poly + * output: + * DATA: operand1 * operand2 mod poly + * changed: + * T1 + * T2 + * T3 + */ +__clmul_gf128mul_ble: + movaps DATA, T1 + pshufd $0b01001110, DATA, T2 + pshufd $0b01001110, SHASH, T3 + pxor DATA, T2 + pxor SHASH, T3 + + PCLMULQDQ 0x00 SHASH DATA # DATA = a0 * b0 + PCLMULQDQ 0x11 SHASH T1 # T1 = a1 * b1 + PCLMULQDQ 0x00 T3 T2 # T2 = (a1 + a0) * (b1 + b0) + pxor DATA, T2 + pxor T1, T2 # T2 = a0 * b1 + a1 * b0 + + movaps T2, T3 + pslldq $8, T3 + psrldq $8, T2 + pxor T3, DATA + pxor T2, T1 # <T1:DATA> is result of + # carry-less multiplication + + # first phase of the reduction + movaps DATA, T3 + psllq $1, T3 + pxor DATA, T3 + psllq $5, T3 + pxor DATA, T3 + psllq $57, T3 + movaps T3, T2 + pslldq $8, T2 + psrldq $8, T3 + pxor T2, DATA + pxor T3, T1 + + # second phase of the reduction + movaps DATA, T2 + psrlq $5, T2 + pxor DATA, T2 + psrlq $1, T2 + pxor DATA, T2 + psrlq $1, T2 + pxor T2, T1 + pxor T1, DATA + ret + +/* void clmul_ghash_mul(char *dst, const be128 *shash) */ +ENTRY(clmul_ghash_mul) + movups (%rdi), DATA + movups (%rsi), SHASH + movaps .Lbswap_mask, BSWAP + PSHUFB_XMM BSWAP DATA + call __clmul_gf128mul_ble + PSHUFB_XMM BSWAP DATA + movups DATA, (%rdi) + ret + +/* + * void clmul_ghash_update(char *dst, const char *src, unsigned int srclen, + * const be128 *shash); + */ +ENTRY(clmul_ghash_update) + cmp $16, %rdx + jb .Lupdate_just_ret # check length + movaps .Lbswap_mask, BSWAP + movups (%rdi), DATA + movups (%rcx), SHASH + PSHUFB_XMM BSWAP DATA +.align 4 +.Lupdate_loop: + movups (%rsi), IN1 + PSHUFB_XMM BSWAP IN1 + pxor IN1, DATA + call __clmul_gf128mul_ble + sub $16, %rdx + add $16, %rsi + cmp $16, %rdx + jge .Lupdate_loop + PSHUFB_XMM BSWAP DATA + movups DATA, (%rdi) +.Lupdate_just_ret: + ret + +/* + * void clmul_ghash_setkey(be128 *shash, const u8 *key); + * + * Calculate hash_key << 1 mod poly + */ +ENTRY(clmul_ghash_setkey) + movaps .Lbswap_mask, BSWAP + movups (%rsi), %xmm0 + PSHUFB_XMM BSWAP %xmm0 + movaps %xmm0, %xmm1 + psllq $1, %xmm0 + psrlq $63, %xmm1 + movaps %xmm1, %xmm2 + pslldq $8, %xmm1 + psrldq $8, %xmm2 + por %xmm1, %xmm0 + # reduction + pshufd $0b00100100, %xmm2, %xmm1 + pcmpeqd .Ltwo_one, %xmm1 + pand .Lpoly, %xmm1 + pxor %xmm1, %xmm0 + movups %xmm0, (%rdi) + ret diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c new file mode 100644 index 000000000000..cbcc8d8ea93a --- /dev/null +++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c @@ -0,0 +1,333 @@ +/* + * Accelerated GHASH implementation with Intel PCLMULQDQ-NI + * instructions. This file contains glue code. + * + * Copyright (c) 2009 Intel Corp. + * Author: Huang Ying <ying.huang@intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/crypto.h> +#include <crypto/algapi.h> +#include <crypto/cryptd.h> +#include <crypto/gf128mul.h> +#include <crypto/internal/hash.h> +#include <asm/i387.h> + +#define GHASH_BLOCK_SIZE 16 +#define GHASH_DIGEST_SIZE 16 + +void clmul_ghash_mul(char *dst, const be128 *shash); + +void clmul_ghash_update(char *dst, const char *src, unsigned int srclen, + const be128 *shash); + +void clmul_ghash_setkey(be128 *shash, const u8 *key); + +struct ghash_async_ctx { + struct cryptd_ahash *cryptd_tfm; +}; + +struct ghash_ctx { + be128 shash; +}; + +struct ghash_desc_ctx { + u8 buffer[GHASH_BLOCK_SIZE]; + u32 bytes; +}; + +static int ghash_init(struct shash_desc *desc) +{ + struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); + + memset(dctx, 0, sizeof(*dctx)); + + return 0; +} + +static int ghash_setkey(struct crypto_shash *tfm, + const u8 *key, unsigned int keylen) +{ + struct ghash_ctx *ctx = crypto_shash_ctx(tfm); + + if (keylen != GHASH_BLOCK_SIZE) { + crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); + return -EINVAL; + } + + clmul_ghash_setkey(&ctx->shash, key); + + return 0; +} + +static int ghash_update(struct shash_desc *desc, + const u8 *src, unsigned int srclen) +{ + struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); + struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm); + u8 *dst = dctx->buffer; + + kernel_fpu_begin(); + if (dctx->bytes) { + int n = min(srclen, dctx->bytes); + u8 *pos = dst + (GHASH_BLOCK_SIZE - dctx->bytes); + + dctx->bytes -= n; + srclen -= n; + + while (n--) + *pos++ ^= *src++; + + if (!dctx->bytes) + clmul_ghash_mul(dst, &ctx->shash); + } + + clmul_ghash_update(dst, src, srclen, &ctx->shash); + kernel_fpu_end(); + + if (srclen & 0xf) { + src += srclen - (srclen & 0xf); + srclen &= 0xf; + dctx->bytes = GHASH_BLOCK_SIZE - srclen; + while (srclen--) + *dst++ ^= *src++; + } + + return 0; +} + +static void ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx) +{ + u8 *dst = dctx->buffer; + + if (dctx->bytes) { + u8 *tmp = dst + (GHASH_BLOCK_SIZE - dctx->bytes); + + while (dctx->bytes--) + *tmp++ ^= 0; + + kernel_fpu_begin(); + clmul_ghash_mul(dst, &ctx->shash); + kernel_fpu_end(); + } + + dctx->bytes = 0; +} + +static int ghash_final(struct shash_desc *desc, u8 *dst) +{ + struct ghash_desc_ctx *dctx = shash_desc_ctx(desc); + struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm); + u8 *buf = dctx->buffer; + + ghash_flush(ctx, dctx); + memcpy(dst, buf, GHASH_BLOCK_SIZE); + + return 0; +} + +static struct shash_alg ghash_alg = { + .digestsize = GHASH_DIGEST_SIZE, + .init = ghash_init, + .update = ghash_update, + .final = ghash_final, + .setkey = ghash_setkey, + .descsize = sizeof(struct ghash_desc_ctx), + .base = { + .cra_name = "__ghash", + .cra_driver_name = "__ghash-pclmulqdqni", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = GHASH_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ghash_ctx), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ghash_alg.base.cra_list), + }, +}; + +static int ghash_async_init(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct ahash_request *cryptd_req = ahash_request_ctx(req); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + if (!irq_fpu_usable()) { + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_init(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); + + desc->tfm = child; + desc->flags = req->base.flags; + return crypto_shash_init(desc); + } +} + +static int ghash_async_update(struct ahash_request *req) +{ + struct ahash_request *cryptd_req = ahash_request_ctx(req); + + if (!irq_fpu_usable()) { + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_update(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + return shash_ahash_update(req, desc); + } +} + +static int ghash_async_final(struct ahash_request *req) +{ + struct ahash_request *cryptd_req = ahash_request_ctx(req); + + if (!irq_fpu_usable()) { + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_final(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + return crypto_shash_final(desc, req->result); + } +} + +static int ghash_async_digest(struct ahash_request *req) +{ + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct ahash_request *cryptd_req = ahash_request_ctx(req); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + + if (!irq_fpu_usable()) { + memcpy(cryptd_req, req, sizeof(*req)); + ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); + return crypto_ahash_digest(cryptd_req); + } else { + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); + + desc->tfm = child; + desc->flags = req->base.flags; + return shash_ahash_digest(req, desc); + } +} + +static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key, + unsigned int keylen) +{ + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct crypto_ahash *child = &ctx->cryptd_tfm->base; + int err; + + crypto_ahash_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_ahash_set_flags(child, crypto_ahash_get_flags(tfm) + & CRYPTO_TFM_REQ_MASK); + err = crypto_ahash_setkey(child, key, keylen); + crypto_ahash_set_flags(tfm, crypto_ahash_get_flags(child) + & CRYPTO_TFM_RES_MASK); + + return 0; +} + +static int ghash_async_init_tfm(struct crypto_tfm *tfm) +{ + struct cryptd_ahash *cryptd_tfm; + struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_tfm = cryptd_alloc_ahash("__ghash-pclmulqdqni", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ctx->cryptd_tfm = cryptd_tfm; + crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), + sizeof(struct ahash_request) + + crypto_ahash_reqsize(&cryptd_tfm->base)); + + return 0; +} + +static void ghash_async_exit_tfm(struct crypto_tfm *tfm) +{ + struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_free_ahash(ctx->cryptd_tfm); +} + +static struct ahash_alg ghash_async_alg = { + .init = ghash_async_init, + .update = ghash_async_update, + .final = ghash_async_final, + .setkey = ghash_async_setkey, + .digest = ghash_async_digest, + .halg = { + .digestsize = GHASH_DIGEST_SIZE, + .base = { + .cra_name = "ghash", + .cra_driver_name = "ghash-clmulni", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC, + .cra_blocksize = GHASH_BLOCK_SIZE, + .cra_type = &crypto_ahash_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ghash_async_alg.halg.base.cra_list), + .cra_init = ghash_async_init_tfm, + .cra_exit = ghash_async_exit_tfm, + }, + }, +}; + +static int __init ghash_pclmulqdqni_mod_init(void) +{ + int err; + + if (!cpu_has_pclmulqdq) { + printk(KERN_INFO "Intel PCLMULQDQ-NI instructions are not" + " detected.\n"); + return -ENODEV; + } + + err = crypto_register_shash(&ghash_alg); + if (err) + goto err_out; + err = crypto_register_ahash(&ghash_async_alg); + if (err) + goto err_shash; + + return 0; + +err_shash: + crypto_unregister_shash(&ghash_alg); +err_out: + return err; +} + +static void __exit ghash_pclmulqdqni_mod_exit(void) +{ + crypto_unregister_ahash(&ghash_async_alg); + crypto_unregister_shash(&ghash_alg); +} + +module_init(ghash_pclmulqdqni_mod_init); +module_exit(ghash_pclmulqdqni_mod_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("GHASH Message Digest Algorithm, " + "acclerated by PCLMULQDQ-NI"); +MODULE_ALIAS("ghash"); diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 4eefdca9832b..53147ad85b96 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -696,7 +696,7 @@ ia32_sys_call_table: .quad quiet_ni_syscall /* streams2 */ .quad stub32_vfork /* 190 */ .quad compat_sys_getrlimit - .quad sys32_mmap2 + .quad sys_mmap_pgoff .quad sys32_truncate64 .quad sys32_ftruncate64 .quad sys32_stat64 /* 195 */ diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c index df82c0e48ded..422572c77923 100644 --- a/arch/x86/ia32/sys_ia32.c +++ b/arch/x86/ia32/sys_ia32.c @@ -155,9 +155,6 @@ struct mmap_arg_struct { asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg) { struct mmap_arg_struct a; - struct file *file = NULL; - unsigned long retval; - struct mm_struct *mm ; if (copy_from_user(&a, arg, sizeof(a))) return -EFAULT; @@ -165,22 +162,8 @@ asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) return -EINVAL; - if (!(a.flags & MAP_ANONYMOUS)) { - file = fget(a.fd); - if (!file) - return -EBADF; - } - - mm = current->mm; - down_write(&mm->mmap_sem); - retval = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, + return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset>>PAGE_SHIFT); - if (file) - fput(file); - - up_write(&mm->mmap_sem); - - return retval; } asmlinkage long sys32_mprotect(unsigned long start, size_t len, @@ -483,30 +466,6 @@ asmlinkage long sys32_sendfile(int out_fd, int in_fd, return ret; } -asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - struct mm_struct *mm = current->mm; - unsigned long error; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - return -EBADF; - } - - down_write(&mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(&mm->mmap_sem); - - if (file) - fput(file); - return error; -} - asmlinkage long sys32_olduname(struct oldold_utsname __user *name) { char *arch = "x86_64"; diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h index 84786fb9a23b..4d817f9e6e77 100644 --- a/arch/x86/include/asm/amd_iommu_proto.h +++ b/arch/x86/include/asm/amd_iommu_proto.h @@ -28,7 +28,9 @@ extern void amd_iommu_flush_all_domains(void); extern void amd_iommu_flush_all_devices(void); extern void amd_iommu_apply_erratum_63(u16 devid); extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu); - +extern int amd_iommu_init_devices(void); +extern void amd_iommu_uninit_devices(void); +extern void amd_iommu_init_notifier(void); #ifndef CONFIG_AMD_IOMMU_STATS static inline void amd_iommu_stats_init(void) { } diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 9cfc88b97742..613700f27a4a 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -248,6 +248,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC) #define cpu_has_xsave boot_cpu_has(X86_FEATURE_XSAVE) #define cpu_has_hypervisor boot_cpu_has(X86_FEATURE_HYPERVISOR) +#define cpu_has_pclmulqdq boot_cpu_has(X86_FEATURE_PCLMULQDQ) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h index 9d6684849fd9..278441f39856 100644 --- a/arch/x86/include/asm/desc_defs.h +++ b/arch/x86/include/asm/desc_defs.h @@ -12,9 +12,9 @@ #include <linux/types.h> /* - * FIXME: Acessing the desc_struct through its fields is more elegant, + * FIXME: Accessing the desc_struct through its fields is more elegant, * and should be the one valid thing to do. However, a lot of open code - * still touches the a and b acessors, and doing this allow us to do it + * still touches the a and b accessors, and doing this allow us to do it * incrementally. We keep the signature as a struct, rather than an union, * so we can get rid of it transparently in the future -- glommer */ diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h index 1c22cb05ad6a..5d89fd2a3690 100644 --- a/arch/x86/include/asm/hpet.h +++ b/arch/x86/include/asm/hpet.h @@ -65,11 +65,12 @@ /* hpet memory map physical address */ extern unsigned long hpet_address; extern unsigned long force_hpet_address; +extern u8 hpet_blockid; extern int hpet_force_user; extern int is_hpet_enabled(void); extern int hpet_enable(void); extern void hpet_disable(void); -extern unsigned long hpet_readl(unsigned long a); +extern unsigned int hpet_readl(unsigned int a); extern void force_hpet_resume(void); extern void hpet_msi_unmask(unsigned int irq); @@ -78,9 +79,9 @@ extern void hpet_msi_write(unsigned int irq, struct msi_msg *msg); extern void hpet_msi_read(unsigned int irq, struct msi_msg *msg); #ifdef CONFIG_PCI_MSI -extern int arch_setup_hpet_msi(unsigned int irq); +extern int arch_setup_hpet_msi(unsigned int irq, unsigned int id); #else -static inline int arch_setup_hpet_msi(unsigned int irq) +static inline int arch_setup_hpet_msi(unsigned int irq, unsigned int id) { return -EINVAL; } diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index 0b20bbb758f2..ebfb8a9e11f7 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -10,6 +10,8 @@ #ifndef _ASM_X86_I387_H #define _ASM_X86_I387_H +#ifndef __ASSEMBLY__ + #include <linux/sched.h> #include <linux/kernel_stat.h> #include <linux/regset.h> @@ -411,4 +413,9 @@ static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk) } } +#endif /* __ASSEMBLY__ */ + +#define PSHUFB_XMM5_XMM0 .byte 0x66, 0x0f, 0x38, 0x00, 0xc5 +#define PSHUFB_XMM5_XMM6 .byte 0x66, 0x0f, 0x38, 0x00, 0xf5 + #endif /* _ASM_X86_I387_H */ diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h new file mode 100644 index 000000000000..14cf526091f9 --- /dev/null +++ b/arch/x86/include/asm/inst.h @@ -0,0 +1,150 @@ +/* + * Generate .byte code for some instructions not supported by old + * binutils. + */ +#ifndef X86_ASM_INST_H +#define X86_ASM_INST_H + +#ifdef __ASSEMBLY__ + + .macro XMM_NUM opd xmm + .ifc \xmm,%xmm0 + \opd = 0 + .endif + .ifc \xmm,%xmm1 + \opd = 1 + .endif + .ifc \xmm,%xmm2 + \opd = 2 + .endif + .ifc \xmm,%xmm3 + \opd = 3 + .endif + .ifc \xmm,%xmm4 + \opd = 4 + .endif + .ifc \xmm,%xmm5 + \opd = 5 + .endif + .ifc \xmm,%xmm6 + \opd = 6 + .endif + .ifc \xmm,%xmm7 + \opd = 7 + .endif + .ifc \xmm,%xmm8 + \opd = 8 + .endif + .ifc \xmm,%xmm9 + \opd = 9 + .endif + .ifc \xmm,%xmm10 + \opd = 10 + .endif + .ifc \xmm,%xmm11 + \opd = 11 + .endif + .ifc \xmm,%xmm12 + \opd = 12 + .endif + .ifc \xmm,%xmm13 + \opd = 13 + .endif + .ifc \xmm,%xmm14 + \opd = 14 + .endif + .ifc \xmm,%xmm15 + \opd = 15 + .endif + .endm + + .macro PFX_OPD_SIZE + .byte 0x66 + .endm + + .macro PFX_REX opd1 opd2 + .if (\opd1 | \opd2) & 8 + .byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1) + .endif + .endm + + .macro MODRM mod opd1 opd2 + .byte \mod | (\opd1 & 7) | ((\opd2 & 7) << 3) + .endm + + .macro PSHUFB_XMM xmm1 xmm2 + XMM_NUM pshufb_opd1 \xmm1 + XMM_NUM pshufb_opd2 \xmm2 + PFX_OPD_SIZE + PFX_REX pshufb_opd1 pshufb_opd2 + .byte 0x0f, 0x38, 0x00 + MODRM 0xc0 pshufb_opd1 pshufb_opd2 + .endm + + .macro PCLMULQDQ imm8 xmm1 xmm2 + XMM_NUM clmul_opd1 \xmm1 + XMM_NUM clmul_opd2 \xmm2 + PFX_OPD_SIZE + PFX_REX clmul_opd1 clmul_opd2 + .byte 0x0f, 0x3a, 0x44 + MODRM 0xc0 clmul_opd1 clmul_opd2 + .byte \imm8 + .endm + + .macro AESKEYGENASSIST rcon xmm1 xmm2 + XMM_NUM aeskeygen_opd1 \xmm1 + XMM_NUM aeskeygen_opd2 \xmm2 + PFX_OPD_SIZE + PFX_REX aeskeygen_opd1 aeskeygen_opd2 + .byte 0x0f, 0x3a, 0xdf + MODRM 0xc0 aeskeygen_opd1 aeskeygen_opd2 + .byte \rcon + .endm + + .macro AESIMC xmm1 xmm2 + XMM_NUM aesimc_opd1 \xmm1 + XMM_NUM aesimc_opd2 \xmm2 + PFX_OPD_SIZE + PFX_REX aesimc_opd1 aesimc_opd2 + .byte 0x0f, 0x38, 0xdb + MODRM 0xc0 aesimc_opd1 aesimc_opd2 + .endm + + .macro AESENC xmm1 xmm2 + XMM_NUM aesenc_opd1 \xmm1 + XMM_NUM aesenc_opd2 \xmm2 + PFX_OPD_SIZE + PFX_REX aesenc_opd1 aesenc_opd2 + .byte 0x0f, 0x38, 0xdc + MODRM 0xc0 aesenc_opd1 aesenc_opd2 + .endm + + .macro AESENCLAST xmm1 xmm2 + XMM_NUM aesenclast_opd1 \xmm1 + XMM_NUM aesenclast_opd2 \xmm2 + PFX_OPD_SIZE + PFX_REX aesenclast_opd1 aesenclast_opd2 + .byte 0x0f, 0x38, 0xdd + MODRM 0xc0 aesenclast_opd1 aesenclast_opd2 + .endm + + .macro AESDEC xmm1 xmm2 + XMM_NUM aesdec_opd1 \xmm1 + XMM_NUM aesdec_opd2 \xmm2 + PFX_OPD_SIZE + PFX_REX aesdec_opd1 aesdec_opd2 + .byte 0x0f, 0x38, 0xde + MODRM 0xc0 aesdec_opd1 aesdec_opd2 + .endm + + .macro AESDECLAST xmm1 xmm2 + XMM_NUM aesdeclast_opd1 \xmm1 + XMM_NUM aesdeclast_opd2 \xmm2 + PFX_OPD_SIZE + PFX_REX aesdeclast_opd1 aesdeclast_opd2 + .byte 0x0f, 0x38, 0xdf + MODRM 0xc0 aesdeclast_opd1 aesdeclast_opd2 + .endm +#endif + +#endif diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index ede6998bd92c..91df7c51806c 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -47,7 +47,7 @@ static inline void resume_map_numa_kva(pgd_t *pgd) {} /* * generic node memory support, the following assumptions apply: * - * 1) memory comes in 64Mb contigious chunks which are either present or not + * 1) memory comes in 64Mb contiguous chunks which are either present or not * 2) we will not have more than 64Gb in total * * for now assume that 64Gb is max amount of RAM for whole system diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index b399988eee3a..b4bf9a942ed0 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -118,11 +118,27 @@ extern int __init pcibios_init(void); /* pci-mmconfig.c */ +/* "PCI MMCONFIG %04x [bus %02x-%02x]" */ +#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2) + +struct pci_mmcfg_region { + struct list_head list; + struct resource res; + u64 address; + char __iomem *virt; + u16 segment; + u8 start_bus; + u8 end_bus; + char name[PCI_MMCFG_RESOURCE_NAME_LEN]; +}; + extern int __init pci_mmcfg_arch_init(void); extern void __init pci_mmcfg_arch_free(void); +extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus); + +extern struct list_head pci_mmcfg_list; -extern struct acpi_mcfg_allocation *pci_mmcfg_config; -extern int pci_mmcfg_config_num; +#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20) /* * AMD Fam10h CPUs are buggy, and cannot access MMIO config space diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h index 72e5a4491661..04459d25e66e 100644 --- a/arch/x86/include/asm/sigcontext.h +++ b/arch/x86/include/asm/sigcontext.h @@ -124,7 +124,7 @@ struct sigcontext { * fpstate is really (struct _fpstate *) or (struct _xstate *) * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end - * of extended memory layout. See comments at the defintion of + * of extended memory layout. See comments at the definition of * (struct _fpx_sw_bytes) */ void __user *fpstate; /* zero when no FPU/extended context */ @@ -219,7 +219,7 @@ struct sigcontext { * fpstate is really (struct _fpstate *) or (struct _xstate *) * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end - * of extended memory layout. See comments at the defintion of + * of extended memory layout. See comments at the definition of * (struct _fpx_sw_bytes) */ void __user *fpstate; /* zero when no FPU/extended context */ diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h index 9af9decb38c3..4a5a089e1c62 100644 --- a/arch/x86/include/asm/sys_ia32.h +++ b/arch/x86/include/asm/sys_ia32.h @@ -57,9 +57,6 @@ asmlinkage long sys32_pwrite(unsigned int, char __user *, u32, u32, u32); asmlinkage long sys32_personality(unsigned long); asmlinkage long sys32_sendfile(int, int, compat_off_t __user *, s32); -asmlinkage long sys32_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, unsigned long); - struct oldold_utsname; struct old_utsname; asmlinkage long sys32_olduname(struct oldold_utsname __user *); diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h index 372b76edd63f..1bb6e395881c 100644 --- a/arch/x86/include/asm/syscalls.h +++ b/arch/x86/include/asm/syscalls.h @@ -55,8 +55,6 @@ struct sel_arg_struct; struct oldold_utsname; struct old_utsname; -asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, unsigned long); asmlinkage int old_mmap(struct mmap_arg_struct __user *); asmlinkage int old_select(struct sel_arg_struct __user *); asmlinkage int sys_ipc(uint, int, int, int, void __user *, long); diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index 022a84386de8..ecb544e65382 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -23,6 +23,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct tss_struct; void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, struct tss_struct *tss); +extern void show_regs_common(void); #ifdef CONFIG_X86_32 diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 80e2984f521c..b414d2b401f6 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -55,7 +55,7 @@ #define DESC_STATUS_SOURCE_TIMEOUT 3 /* - * source side threshholds at which message retries print a warning + * source side thresholds at which message retries print a warning */ #define SOURCE_TIMEOUT_LIMIT 20 #define DESTINATION_TIMEOUT_LIMIT 20 diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h index d5b7e90c0edf..396ff4cc8ed4 100644 --- a/arch/x86/include/asm/xen/hypervisor.h +++ b/arch/x86/include/asm/xen/hypervisor.h @@ -37,31 +37,4 @@ extern struct shared_info *HYPERVISOR_shared_info; extern struct start_info *xen_start_info; -enum xen_domain_type { - XEN_NATIVE, /* running on bare hardware */ - XEN_PV_DOMAIN, /* running in a PV domain */ - XEN_HVM_DOMAIN, /* running in a Xen hvm domain */ -}; - -#ifdef CONFIG_XEN -extern enum xen_domain_type xen_domain_type; -#else -#define xen_domain_type XEN_NATIVE -#endif - -#define xen_domain() (xen_domain_type != XEN_NATIVE) -#define xen_pv_domain() (xen_domain() && \ - xen_domain_type == XEN_PV_DOMAIN) -#define xen_hvm_domain() (xen_domain() && \ - xen_domain_type == XEN_HVM_DOMAIN) - -#ifdef CONFIG_XEN_DOM0 -#include <xen/interface/xen.h> - -#define xen_initial_domain() (xen_pv_domain() && \ - xen_start_info->flags & SIF_INITDOMAIN) -#else /* !CONFIG_XEN_DOM0 */ -#define xen_initial_domain() (0) -#endif /* CONFIG_XEN_DOM0 */ - #endif /* _ASM_X86_XEN_HYPERVISOR_H */ diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 67e929b89875..fb1035cd9a6a 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -624,6 +624,7 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) } hpet_address = hpet_tbl->address.address; + hpet_blockid = hpet_tbl->sequence; /* * Some broken BIOSes advertise HPET at 0x0. We really do not @@ -1122,7 +1123,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) if (!acpi_sci_override_gsi) acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0); - /* Fill in identity legacy mapings where no override */ + /* Fill in identity legacy mappings where no override */ mp_config_acpi_legacy_irqs(); count = diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 32fb09102a13..b990b5cc9541 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -166,6 +166,43 @@ static void iommu_uninit_device(struct device *dev) { kfree(dev->archdata.iommu); } + +void __init amd_iommu_uninit_devices(void) +{ + struct pci_dev *pdev = NULL; + + for_each_pci_dev(pdev) { + + if (!check_device(&pdev->dev)) + continue; + + iommu_uninit_device(&pdev->dev); + } +} + +int __init amd_iommu_init_devices(void) +{ + struct pci_dev *pdev = NULL; + int ret = 0; + + for_each_pci_dev(pdev) { + + if (!check_device(&pdev->dev)) + continue; + + ret = iommu_init_device(&pdev->dev); + if (ret) + goto out_free; + } + + return 0; + +out_free: + + amd_iommu_uninit_devices(); + + return ret; +} #ifdef CONFIG_AMD_IOMMU_STATS /* @@ -1587,6 +1624,11 @@ static struct notifier_block device_nb = { .notifier_call = device_change_notifier, }; +void amd_iommu_init_notifier(void) +{ + bus_register_notifier(&pci_bus_type, &device_nb); +} + /***************************************************************************** * * The next functions belong to the dma_ops mapping/unmapping code. @@ -1783,7 +1825,7 @@ retry: goto out; /* - * aperture was sucessfully enlarged by 128 MB, try + * aperture was successfully enlarged by 128 MB, try * allocation again */ goto retry; @@ -2145,8 +2187,6 @@ static void prealloc_protection_domains(void) if (!check_device(&dev->dev)) continue; - iommu_init_device(&dev->dev); - /* Is there already any domain for it? */ if (domain_for_device(&dev->dev)) continue; @@ -2215,8 +2255,6 @@ int __init amd_iommu_init_dma_ops(void) register_iommu(&amd_iommu_ops); - bus_register_notifier(&pci_bus_type, &device_nb); - amd_iommu_stats_init(); return 0; @@ -2490,7 +2528,7 @@ int __init amd_iommu_init_passthrough(void) struct pci_dev *dev = NULL; u16 devid; - /* allocate passthroug domain */ + /* allocate passthrough domain */ pt_domain = protection_domain_alloc(); if (!pt_domain) return -ENOMEM; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 7ffc39965233..1dca9c34eaeb 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1274,6 +1274,10 @@ static int __init amd_iommu_init(void) if (ret) goto free; + ret = amd_iommu_init_devices(); + if (ret) + goto free; + if (iommu_pass_through) ret = amd_iommu_init_passthrough(); else @@ -1281,6 +1285,8 @@ static int __init amd_iommu_init(void) if (ret) goto free; + amd_iommu_init_notifier(); + enable_iommus(); if (iommu_pass_through) @@ -1296,6 +1302,9 @@ out: return ret; free: + + amd_iommu_uninit_devices(); + free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, get_order(MAX_DOMAIN_ID/8)); @@ -1336,6 +1345,9 @@ void __init amd_iommu_detect(void) iommu_detected = 1; amd_iommu_detected = 1; x86_init.iommu.iommu_init = amd_iommu_init; + + /* Make sure ACS will be enabled */ + pci_request_acs(); } } diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index ad8c75b9e453..efb2b9cd132c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -647,7 +647,7 @@ static int __init calibrate_APIC_clock(void) calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS; apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta); - apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult); + apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult); apic_printk(APIC_VERBOSE, "..... calibration result: %u\n", calibration_result); diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index d9acc3bee0f4..e31b9ffe25f5 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -127,7 +127,7 @@ static u32 noop_apic_read(u32 reg) static void noop_apic_write(u32 reg, u32 v) { - WARN_ON_ONCE((cpu_has_apic || !disable_apic)); + WARN_ON_ONCE(cpu_has_apic && !disable_apic); } struct apic apic_noop = { diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index e85f8fb7f8e7..dd2b5f264643 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -27,6 +27,9 @@ * * http://www.unisys.com */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/notifier.h> #include <linux/spinlock.h> #include <linux/cpumask.h> @@ -223,9 +226,9 @@ static int parse_unisys_oem(char *oemptr) mip_addr = val; mip = (struct mip_reg *)val; mip_reg = __va(mip); - pr_debug("es7000_mipcfg: host_reg = 0x%lx \n", + pr_debug("host_reg = 0x%lx\n", (unsigned long)host_reg); - pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n", + pr_debug("mip_reg = 0x%lx\n", (unsigned long)mip_reg); success++; break; @@ -401,7 +404,7 @@ static void es7000_enable_apic_mode(void) if (!es7000_plat) return; - printk(KERN_INFO "ES7000: Enabling APIC mode.\n"); + pr_info("Enabling APIC mode.\n"); memset(&es7000_mip_reg, 0, sizeof(struct mip_reg)); es7000_mip_reg.off_0x00 = MIP_SW_APIC; es7000_mip_reg.off_0x38 = MIP_VALID; @@ -514,8 +517,7 @@ static void es7000_setup_apic_routing(void) { int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id()); - printk(KERN_INFO - "Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", + pr_info("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", (apic_version[apic] == 0x14) ? "Physical Cluster" : "Logical Cluster", nr_ioapics, cpumask_bits(es7000_target_cpus())[0]); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index c0b4468683f9..d5d498fbee4b 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3267,7 +3267,8 @@ void destroy_irq(unsigned int irq) * MSI message composition */ #ifdef CONFIG_PCI_MSI -static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) +static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, + struct msi_msg *msg, u8 hpet_id) { struct irq_cfg *cfg; int err; @@ -3301,7 +3302,10 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms irte.dest_id = IRTE_DEST(dest); /* Set source-id of interrupt request */ - set_msi_sid(&irte, pdev); + if (pdev) + set_msi_sid(&irte, pdev); + else + set_hpet_sid(&irte, hpet_id); modify_irte(irq, &irte); @@ -3466,7 +3470,7 @@ static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq) int ret; struct msi_msg msg; - ret = msi_compose_msg(dev, irq, &msg); + ret = msi_compose_msg(dev, irq, &msg, -1); if (ret < 0) return ret; @@ -3599,7 +3603,7 @@ int arch_setup_dmar_msi(unsigned int irq) int ret; struct msi_msg msg; - ret = msi_compose_msg(NULL, irq, &msg); + ret = msi_compose_msg(NULL, irq, &msg, -1); if (ret < 0) return ret; dmar_msi_write(irq, &msg); @@ -3639,6 +3643,19 @@ static int hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) #endif /* CONFIG_SMP */ +static struct irq_chip ir_hpet_msi_type = { + .name = "IR-HPET_MSI", + .unmask = hpet_msi_unmask, + .mask = hpet_msi_mask, +#ifdef CONFIG_INTR_REMAP + .ack = ir_ack_apic_edge, +#ifdef CONFIG_SMP + .set_affinity = ir_set_msi_irq_affinity, +#endif +#endif + .retrigger = ioapic_retrigger_irq, +}; + static struct irq_chip hpet_msi_type = { .name = "HPET_MSI", .unmask = hpet_msi_unmask, @@ -3650,20 +3667,36 @@ static struct irq_chip hpet_msi_type = { .retrigger = ioapic_retrigger_irq, }; -int arch_setup_hpet_msi(unsigned int irq) +int arch_setup_hpet_msi(unsigned int irq, unsigned int id) { int ret; struct msi_msg msg; struct irq_desc *desc = irq_to_desc(irq); - ret = msi_compose_msg(NULL, irq, &msg); + if (intr_remapping_enabled) { + struct intel_iommu *iommu = map_hpet_to_ir(id); + int index; + + if (!iommu) + return -1; + + index = alloc_irte(iommu, irq, 1); + if (index < 0) + return -1; + } + + ret = msi_compose_msg(NULL, irq, &msg, id); if (ret < 0) return ret; hpet_msi_write(irq, &msg); desc->status |= IRQ_MOVE_PCNTXT; - set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq, - "edge"); + if (irq_remapped(irq)) + set_irq_chip_and_handler_name(irq, &ir_hpet_msi_type, + handle_edge_irq, "edge"); + else + set_irq_chip_and_handler_name(irq, &hpet_msi_type, + handle_edge_irq, "edge"); return 0; } diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 8b581d3905cb..d2e7c77c1ea4 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -764,14 +764,15 @@ static struct freq_attr *acpi_cpufreq_attr[] = { }; static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, - .init = acpi_cpufreq_cpu_init, - .exit = acpi_cpufreq_cpu_exit, - .resume = acpi_cpufreq_resume, - .name = "acpi-cpufreq", - .owner = THIS_MODULE, - .attr = acpi_cpufreq_attr, + .verify = acpi_cpufreq_verify, + .target = acpi_cpufreq_target, + .bios_limit = acpi_processor_get_bios_limit, + .init = acpi_cpufreq_cpu_init, + .exit = acpi_cpufreq_cpu_exit, + .resume = acpi_cpufreq_resume, + .name = "acpi-cpufreq", + .owner = THIS_MODULE, + .attr = acpi_cpufreq_attr, }; static int __init acpi_cpufreq_init(void) diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index cabd2fa3fc93..7e7eea4f8261 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -885,7 +885,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) /* Find ACPI data for processor */ acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, &longhaul_walk_callback, + ACPI_UINT32_MAX, &longhaul_walk_callback, NULL, NULL, (void *)&pr); /* Check ACPI support for C3 state */ diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index f10dea409f40..cb01dac267d3 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -164,7 +164,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) } /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cpuinfo.transition_latency = 200000; policy->cur = busfreq * max_multiplier; result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index d47c775eb0ab..9a97116f89e5 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -714,14 +714,17 @@ static struct freq_attr *powernow_table_attr[] = { }; static struct cpufreq_driver powernow_driver = { - .verify = powernow_verify, - .target = powernow_target, - .get = powernow_get, - .init = powernow_cpu_init, - .exit = powernow_cpu_exit, - .name = "powernow-k7", - .owner = THIS_MODULE, - .attr = powernow_table_attr, + .verify = powernow_verify, + .target = powernow_target, + .get = powernow_get, +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + .bios_limit = acpi_processor_get_bios_limit, +#endif + .init = powernow_cpu_init, + .exit = powernow_cpu_exit, + .name = "powernow-k7", + .owner = THIS_MODULE, + .attr = powernow_table_attr, }; static int __init powernow_init(void) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 3f12dabeab52..a9df9441a9a2 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1118,7 +1118,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation) { - cpumask_t oldmask; + cpumask_var_t oldmask; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); u32 checkfid; u32 checkvid; @@ -1131,9 +1131,13 @@ static int powernowk8_target(struct cpufreq_policy *pol, checkfid = data->currfid; checkvid = data->currvid; - /* only run on specific CPU from here on */ - oldmask = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu)); + /* only run on specific CPU from here on. */ + /* This is poor form: use a workqueue or smp_call_function_single */ + if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) + return -ENOMEM; + + cpumask_copy(oldmask, tsk_cpumask(current)); + set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); if (smp_processor_id() != pol->cpu) { printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); @@ -1193,7 +1197,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, ret = 0; err_out: - set_cpus_allowed_ptr(current, &oldmask); + set_cpus_allowed_ptr(current, oldmask); + free_cpumask_var(oldmask); return ret; } @@ -1393,14 +1398,15 @@ static struct freq_attr *powernow_k8_attr[] = { }; static struct cpufreq_driver cpufreq_amd64_driver = { - .verify = powernowk8_verify, - .target = powernowk8_target, - .init = powernowk8_cpu_init, - .exit = __devexit_p(powernowk8_cpu_exit), - .get = powernowk8_get, - .name = "powernow-k8", - .owner = THIS_MODULE, - .attr = powernow_k8_attr, + .verify = powernowk8_verify, + .target = powernowk8_target, + .bios_limit = acpi_processor_get_bios_limit, + .init = powernowk8_cpu_init, + .exit = __devexit_p(powernowk8_cpu_exit), + .get = powernowk8_get, + .name = "powernow-k8", + .owner = THIS_MODULE, + .attr = powernow_k8_attr, }; /* driver entry point for init */ diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index 3ae5a7a3a500..2ce8e0b5cc54 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev; /* speedstep_processor */ -static unsigned int speedstep_processor; +static enum speedstep_processor speedstep_processor; static u32 pmbase; diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index f4c290b8482f..ad0083abfa23 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -34,7 +34,7 @@ static int relaxed_check; * GET PROCESSOR CORE SPEED IN KHZ * *********************************************************************/ -static unsigned int pentium3_get_frequency(unsigned int processor) +static unsigned int pentium3_get_frequency(enum speedstep_processor processor) { /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ struct { @@ -227,7 +227,7 @@ static unsigned int pentium4_get_frequency(void) /* Warning: may get called from smp_call_function_single. */ -unsigned int speedstep_get_frequency(unsigned int processor) +unsigned int speedstep_get_frequency(enum speedstep_processor processor) { switch (processor) { case SPEEDSTEP_CPU_PCORE: @@ -380,7 +380,7 @@ EXPORT_SYMBOL_GPL(speedstep_detect_processor); * DETECT SPEEDSTEP SPEEDS * *********************************************************************/ -unsigned int speedstep_get_freqs(unsigned int processor, +unsigned int speedstep_get_freqs(enum speedstep_processor processor, unsigned int *low_speed, unsigned int *high_speed, unsigned int *transition_latency, diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h index 2b6c04e5a304..70d9cea1219d 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h @@ -11,18 +11,18 @@ /* processors */ - -#define SPEEDSTEP_CPU_PIII_C_EARLY 0x00000001 /* Coppermine core */ -#define SPEEDSTEP_CPU_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_CPU_PIII_T 0x00000003 /* Tualatin core */ -#define SPEEDSTEP_CPU_P4M 0x00000004 /* P4-M */ - +enum speedstep_processor { + SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001, /* Coppermine core */ + SPEEDSTEP_CPU_PIII_C = 0x00000002, /* Coppermine core */ + SPEEDSTEP_CPU_PIII_T = 0x00000003, /* Tualatin core */ + SPEEDSTEP_CPU_P4M = 0x00000004, /* P4-M */ /* the following processors are not speedstep-capable and are not auto-detected * in speedstep_detect_processor(). However, their speed can be detected using * the speedstep_get_frequency() call. */ -#define SPEEDSTEP_CPU_PM 0xFFFFFF03 /* Pentium M */ -#define SPEEDSTEP_CPU_P4D 0xFFFFFF04 /* desktop P4 */ -#define SPEEDSTEP_CPU_PCORE 0xFFFFFF05 /* Core */ + SPEEDSTEP_CPU_PM = 0xFFFFFF03, /* Pentium M */ + SPEEDSTEP_CPU_P4D = 0xFFFFFF04, /* desktop P4 */ + SPEEDSTEP_CPU_PCORE = 0xFFFFFF05, /* Core */ +}; /* speedstep states -- only two of them */ @@ -31,10 +31,10 @@ /* detect a speedstep-capable processor */ -extern unsigned int speedstep_detect_processor (void); +extern enum speedstep_processor speedstep_detect_processor(void); /* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_frequency(unsigned int processor); +extern unsigned int speedstep_get_frequency(enum speedstep_processor processor); /* detect the low and high speeds of the processor. The callback @@ -42,7 +42,7 @@ extern unsigned int speedstep_get_frequency(unsigned int processor); * SPEEDSTEP_LOW; the second argument is zero so that no * cpufreq_notify_transition calls are initiated. */ -extern unsigned int speedstep_get_freqs(unsigned int processor, +extern unsigned int speedstep_get_freqs(enum speedstep_processor processor, unsigned int *low_speed, unsigned int *high_speed, unsigned int *transition_latency, diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c index befea088e4f5..04d73c114e49 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -35,7 +35,7 @@ static int smi_cmd; static unsigned int smi_sig; /* info about the processor */ -static unsigned int speedstep_processor; +static enum speedstep_processor speedstep_processor; /* * There are only two frequency states for each processor. Values diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index d7ebf25d10ed..a8aacd4b513c 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1388,13 +1388,14 @@ static void __mcheck_cpu_init_timer(void) struct timer_list *t = &__get_cpu_var(mce_timer); int *n = &__get_cpu_var(mce_next_interval); + setup_timer(t, mce_start_timer, smp_processor_id()); + if (mce_ignore_ce) return; *n = check_interval * HZ; if (!*n) return; - setup_timer(t, mce_start_timer, smp_processor_id()); t->expires = round_jiffies(jiffies + *n); add_timer_on(t, smp_processor_id()); } @@ -1928,7 +1929,7 @@ error2: sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[j].attr); error: while (--i >= 0) - sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[i].attr); + sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]); sysdev_unregister(&per_cpu(mce_dev, cpu)); diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index c1bbed1021d9..45506d5dd8df 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1286,7 +1286,7 @@ x86_perf_event_set_period(struct perf_event *event, return 0; /* - * If we are way outside a reasoable range then just skip forward: + * If we are way outside a reasonable range then just skip forward: */ if (unlikely(left <= -period)) { left = period; @@ -1632,6 +1632,7 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_events *cpuc) data.period = event->hw.last_period; data.addr = 0; + data.raw = NULL; regs.ip = 0; /* @@ -1749,6 +1750,7 @@ static int p6_pmu_handle_irq(struct pt_regs *regs) u64 val; data.addr = 0; + data.raw = NULL; cpuc = &__get_cpu_var(cpu_hw_events); @@ -1794,6 +1796,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) u64 ack, status; data.addr = 0; + data.raw = NULL; cpuc = &__get_cpu_var(cpu_hw_events); @@ -1857,6 +1860,7 @@ static int amd_pmu_handle_irq(struct pt_regs *regs) u64 val; data.addr = 0; + data.raw = NULL; cpuc = &__get_cpu_var(cpu_hw_events); @@ -2062,12 +2066,6 @@ static __init int p6_pmu_init(void) x86_pmu = p6_pmu; - if (!cpu_has_apic) { - pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n"); - pr_info("no hardware sampling interrupt available.\n"); - x86_pmu.apic = 0; - } - return 0; } @@ -2159,6 +2157,16 @@ static __init int amd_pmu_init(void) return 0; } +static void __init pmu_check_apic(void) +{ + if (cpu_has_apic) + return; + + x86_pmu.apic = 0; + pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n"); + pr_info("no hardware sampling interrupt available.\n"); +} + void __init init_hw_perf_events(void) { int err; @@ -2180,6 +2188,8 @@ void __init init_hw_perf_events(void) return; } + pmu_check_apic(); + pr_cont("%s PMU driver.\n", x86_pmu.name); if (x86_pmu.num_events > X86_PMC_MAX_GENERIC) { @@ -2287,7 +2297,7 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip) static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry); static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry); -static DEFINE_PER_CPU(int, in_nmi_frame); +static DEFINE_PER_CPU(int, in_ignored_frame); static void @@ -2303,8 +2313,9 @@ static void backtrace_warning(void *data, char *msg) static int backtrace_stack(void *data, char *name) { - per_cpu(in_nmi_frame, smp_processor_id()) = - x86_is_stack_id(NMI_STACK, name); + per_cpu(in_ignored_frame, smp_processor_id()) = + x86_is_stack_id(NMI_STACK, name) || + x86_is_stack_id(DEBUG_STACK, name); return 0; } @@ -2313,7 +2324,7 @@ static void backtrace_address(void *data, unsigned long addr, int reliable) { struct perf_callchain_entry *entry = data; - if (per_cpu(in_nmi_frame, smp_processor_id())) + if (per_cpu(in_ignored_frame, smp_processor_id())) return; if (reliable) diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 8e740934bd1f..b13af53883aa 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -103,6 +103,35 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, return NULL; } +static inline int +in_irq_stack(unsigned long *stack, unsigned long *irq_stack, + unsigned long *irq_stack_end) +{ + return (stack >= irq_stack && stack < irq_stack_end); +} + +/* + * We are returning from the irq stack and go to the previous one. + * If the previous stack is also in the irq stack, then bp in the first + * frame of the irq stack points to the previous, interrupted one. + * Otherwise we have another level of indirection: We first save + * the bp of the previous stack, then we switch the stack to the irq one + * and save a new bp that links to the previous one. + * (See save_args()) + */ +static inline unsigned long +fixup_bp_irq_link(unsigned long bp, unsigned long *stack, + unsigned long *irq_stack, unsigned long *irq_stack_end) +{ +#ifdef CONFIG_FRAME_POINTER + struct stack_frame *frame = (struct stack_frame *)bp; + + if (!in_irq_stack(stack, irq_stack, irq_stack_end)) + return (unsigned long)frame->next_frame; +#endif + return bp; +} + /* * x86-64 can have up to three kernel stacks: * process stack @@ -175,7 +204,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, irq_stack = irq_stack_end - (IRQ_STACK_SIZE - 64) / sizeof(*irq_stack); - if (stack >= irq_stack && stack < irq_stack_end) { + if (in_irq_stack(stack, irq_stack, irq_stack_end)) { if (ops->stack(data, "IRQ") < 0) break; bp = print_context_stack(tinfo, stack, bp, @@ -186,6 +215,8 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, * pointer (index -1 to end) in the IRQ stack: */ stack = (unsigned long *) (irq_stack_end[-1]); + bp = fixup_bp_irq_link(bp, stack, irq_stack, + irq_stack_end); irq_stack_end = NULL; ops->stack(data, "EOI"); continue; diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 63bca794c8f9..673f693fb451 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1076,10 +1076,10 @@ ENTRY(\sym) TRACE_IRQS_OFF movq %rsp,%rdi /* pt_regs pointer */ xorl %esi,%esi /* no error code */ - PER_CPU(init_tss, %rbp) - subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp) + PER_CPU(init_tss, %r12) + subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12) call \do_sym - addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp) + addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12) jmp paranoid_exit /* %ebx: no swapgs flag */ CFI_ENDPROC END(\sym) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index dedc2bddf7a5..ba6e65884603 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -33,6 +33,7 @@ * HPET address is set in acpi/boot.c, when an ACPI entry exists */ unsigned long hpet_address; +u8 hpet_blockid; /* OS timer block num */ #ifdef CONFIG_PCI_MSI static unsigned long hpet_num_timers; #endif @@ -47,12 +48,12 @@ struct hpet_dev { char name[10]; }; -unsigned long hpet_readl(unsigned long a) +inline unsigned int hpet_readl(unsigned int a) { return readl(hpet_virt_address + a); } -static inline void hpet_writel(unsigned long d, unsigned long a) +static inline void hpet_writel(unsigned int d, unsigned int a) { writel(d, hpet_virt_address + a); } @@ -167,7 +168,7 @@ do { \ static void hpet_reserve_msi_timers(struct hpet_data *hd); -static void hpet_reserve_platform_timers(unsigned long id) +static void hpet_reserve_platform_timers(unsigned int id) { struct hpet __iomem *hpet = hpet_virt_address; struct hpet_timer __iomem *timer = &hpet->hpet_timers[2]; @@ -205,7 +206,7 @@ static void hpet_reserve_platform_timers(unsigned long id) } #else -static void hpet_reserve_platform_timers(unsigned long id) { } +static void hpet_reserve_platform_timers(unsigned int id) { } #endif /* @@ -246,7 +247,7 @@ static void hpet_reset_counter(void) static void hpet_start_counter(void) { - unsigned long cfg = hpet_readl(HPET_CFG); + unsigned int cfg = hpet_readl(HPET_CFG); cfg |= HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); } @@ -271,7 +272,7 @@ static void hpet_resume_counter(void) static void hpet_enable_legacy_int(void) { - unsigned long cfg = hpet_readl(HPET_CFG); + unsigned int cfg = hpet_readl(HPET_CFG); cfg |= HPET_CFG_LEGACY; hpet_writel(cfg, HPET_CFG); @@ -314,7 +315,7 @@ static int hpet_setup_msi_irq(unsigned int irq); static void hpet_set_mode(enum clock_event_mode mode, struct clock_event_device *evt, int timer) { - unsigned long cfg, cmp, now; + unsigned int cfg, cmp, now; uint64_t delta; switch (mode) { @@ -323,7 +324,7 @@ static void hpet_set_mode(enum clock_event_mode mode, delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult; delta >>= evt->shift; now = hpet_readl(HPET_COUNTER); - cmp = now + (unsigned long) delta; + cmp = now + (unsigned int) delta; cfg = hpet_readl(HPET_Tn_CFG(timer)); /* Make sure we use edge triggered interrupts */ cfg &= ~HPET_TN_LEVEL; @@ -339,7 +340,7 @@ static void hpet_set_mode(enum clock_event_mode mode, * (See AMD-8111 HyperTransport I/O Hub Data Sheet, * Publication # 24674) */ - hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer)); + hpet_writel((unsigned int) delta, HPET_Tn_CMP(timer)); hpet_start_counter(); hpet_print_config(); break; @@ -383,13 +384,24 @@ static int hpet_next_event(unsigned long delta, hpet_writel(cnt, HPET_Tn_CMP(timer)); /* - * We need to read back the CMP register to make sure that - * what we wrote hit the chip before we compare it to the - * counter. + * We need to read back the CMP register on certain HPET + * implementations (ATI chipsets) which seem to delay the + * transfer of the compare register into the internal compare + * logic. With small deltas this might actually be too late as + * the counter could already be higher than the compare value + * at that point and we would wait for the next hpet interrupt + * forever. We found out that reading the CMP register back + * forces the transfer so we can rely on the comparison with + * the counter register below. If the read back from the + * compare register does not match the value we programmed + * then we might have a real hardware problem. We can not do + * much about it here, but at least alert the user/admin with + * a prominent warning. */ - WARN_ON_ONCE((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt); + WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt, + KERN_WARNING "hpet: compare register read back failed.\n"); - return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; + return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } static void hpet_legacy_set_mode(enum clock_event_mode mode, @@ -415,7 +427,7 @@ static struct hpet_dev *hpet_devs; void hpet_msi_unmask(unsigned int irq) { struct hpet_dev *hdev = get_irq_data(irq); - unsigned long cfg; + unsigned int cfg; /* unmask it */ cfg = hpet_readl(HPET_Tn_CFG(hdev->num)); @@ -425,7 +437,7 @@ void hpet_msi_unmask(unsigned int irq) void hpet_msi_mask(unsigned int irq) { - unsigned long cfg; + unsigned int cfg; struct hpet_dev *hdev = get_irq_data(irq); /* mask it */ @@ -467,7 +479,7 @@ static int hpet_msi_next_event(unsigned long delta, static int hpet_setup_msi_irq(unsigned int irq) { - if (arch_setup_hpet_msi(irq)) { + if (arch_setup_hpet_msi(irq, hpet_blockid)) { destroy_irq(irq); return -EINVAL; } @@ -584,6 +596,8 @@ static void hpet_msi_capability_lookup(unsigned int start_timer) unsigned int num_timers_used = 0; int i; + if (boot_cpu_has(X86_FEATURE_ARAT)) + return; id = hpet_readl(HPET_ID); num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT); @@ -598,7 +612,7 @@ static void hpet_msi_capability_lookup(unsigned int start_timer) for (i = start_timer; i < num_timers - RESERVE_TIMERS; i++) { struct hpet_dev *hdev = &hpet_devs[num_timers_used]; - unsigned long cfg = hpet_readl(HPET_Tn_CFG(i)); + unsigned int cfg = hpet_readl(HPET_Tn_CFG(i)); /* Only consider HPET timer with MSI support */ if (!(cfg & HPET_TN_FSB_CAP)) @@ -813,7 +827,7 @@ static int hpet_clocksource_register(void) */ int __init hpet_enable(void) { - unsigned long id; + unsigned int id; int i; if (!is_hpet_capable()) @@ -872,10 +886,8 @@ int __init hpet_enable(void) if (id & HPET_ID_LEGSUP) { hpet_legacy_clockevent_register(); - hpet_msi_capability_lookup(2); return 1; } - hpet_msi_capability_lookup(0); return 0; out_nohpet: @@ -908,9 +920,17 @@ static __init int hpet_late_init(void) if (!hpet_virt_address) return -ENODEV; + if (hpet_readl(HPET_ID) & HPET_ID_LEGSUP) + hpet_msi_capability_lookup(2); + else + hpet_msi_capability_lookup(0); + hpet_reserve_platform_timers(hpet_readl(HPET_ID)); hpet_print_config(); + if (boot_cpu_has(X86_FEATURE_ARAT)) + return 0; + for_each_online_cpu(cpu) { hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu); } @@ -925,7 +945,7 @@ fs_initcall(hpet_late_init); void hpet_disable(void) { if (is_hpet_capable()) { - unsigned long cfg = hpet_readl(HPET_CFG); + unsigned int cfg = hpet_readl(HPET_CFG); if (hpet_legacy_int_enabled) { cfg &= ~HPET_CFG_LEGACY; @@ -965,8 +985,8 @@ static int hpet_prev_update_sec; static struct rtc_time hpet_alarm_time; static unsigned long hpet_pie_count; static u32 hpet_t1_cmp; -static unsigned long hpet_default_delta; -static unsigned long hpet_pie_delta; +static u32 hpet_default_delta; +static u32 hpet_pie_delta; static unsigned long hpet_pie_limit; static rtc_irq_handler irq_handler; @@ -1017,7 +1037,8 @@ EXPORT_SYMBOL_GPL(hpet_unregister_irq_handler); */ int hpet_rtc_timer_init(void) { - unsigned long cfg, cnt, delta, flags; + unsigned int cfg, cnt, delta; + unsigned long flags; if (!is_hpet_enabled()) return 0; @@ -1027,7 +1048,7 @@ int hpet_rtc_timer_init(void) clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT; - hpet_default_delta = (unsigned long) clc; + hpet_default_delta = clc; } if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) @@ -1113,7 +1134,7 @@ int hpet_set_periodic_freq(unsigned long freq) clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; do_div(clc, freq); clc >>= hpet_clockevent.shift; - hpet_pie_delta = (unsigned long) clc; + hpet_pie_delta = clc; } return 1; } @@ -1127,7 +1148,7 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq); static void hpet_rtc_timer_reinit(void) { - unsigned long cfg, delta; + unsigned int cfg, delta; int lost_ints = -1; if (unlikely(!hpet_rtc_flags)) { diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c index d42f65ac4927..05d5fec64a94 100644 --- a/arch/x86/kernel/hw_breakpoint.c +++ b/arch/x86/kernel/hw_breakpoint.c @@ -362,8 +362,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp, return ret; } - if (bp->callback) - ret = arch_store_info(bp); + ret = arch_store_info(bp); if (ret < 0) return ret; @@ -519,7 +518,7 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args) break; } - (bp->callback)(bp, args->regs); + perf_bp_event(bp, args->regs); rcu_read_unlock(); } diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 20a5b3689463..dd74fe7273b1 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -86,9 +86,15 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_DS] = regs->ds; gdb_regs[GDB_ES] = regs->es; gdb_regs[GDB_CS] = regs->cs; - gdb_regs[GDB_SS] = __KERNEL_DS; gdb_regs[GDB_FS] = 0xFFFF; gdb_regs[GDB_GS] = 0xFFFF; + if (user_mode_vm(regs)) { + gdb_regs[GDB_SS] = regs->ss; + gdb_regs[GDB_SP] = regs->sp; + } else { + gdb_regs[GDB_SS] = __KERNEL_DS; + gdb_regs[GDB_SP] = kernel_stack_pointer(regs); + } #else gdb_regs[GDB_R8] = regs->r8; gdb_regs[GDB_R9] = regs->r9; @@ -101,8 +107,8 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs32[GDB_PS] = regs->flags; gdb_regs32[GDB_CS] = regs->cs; gdb_regs32[GDB_SS] = regs->ss; -#endif gdb_regs[GDB_SP] = kernel_stack_pointer(regs); +#endif } /** @@ -220,8 +226,7 @@ static void kgdb_correct_hw_break(void) dr7 |= ((breakinfo[breakno].len << 2) | breakinfo[breakno].type) << ((breakno << 2) + 16); - if (breakno >= 0 && breakno <= 3) - set_debugreg(breakinfo[breakno].addr, breakno); + set_debugreg(breakinfo[breakno].addr, breakno); } else { if ((dr7 & breakbit) && !breakinfo[breakno].enabled) { @@ -395,7 +400,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, /* set the trace bit if we're stepping */ if (remcomInBuffer[0] == 's') { linux_regs->flags |= X86_EFLAGS_TF; - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index 1f3186ce213c..5b8c7505b3bc 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -481,7 +481,7 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs, /* * Interrupts are disabled on entry as trap3 is an interrupt gate and they - * remain disabled thorough out this function. + * remain disabled throughout this function. */ static int __kprobes kprobe_handler(struct pt_regs *regs) { @@ -818,7 +818,7 @@ no_change: /* * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. + * remain disabled throughout this function. */ static int __kprobes post_kprobe_handler(struct pt_regs *regs) { diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 63123d902103..37542b67c57e 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -13,6 +13,9 @@ * Licensed under the terms of the GNU General Public * License version 2. See file COPYING for details. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/firmware.h> #include <linux/pci_ids.h> #include <linux/uaccess.h> @@ -81,7 +84,7 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) memset(csig, 0, sizeof(*csig)); rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy); - pr_info("microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev); + pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev); return 0; } @@ -111,8 +114,8 @@ static int get_matching_microcode(int cpu, void *mc, int rev) /* ucode might be chipset specific -- currently we don't support this */ if (mc_header->nb_dev_id || mc_header->sb_dev_id) { - pr_err(KERN_ERR "microcode: CPU%d: loading of chipset " - "specific code not yet supported\n", cpu); + pr_err("CPU%d: loading of chipset specific code not yet supported\n", + cpu); return 0; } @@ -141,12 +144,12 @@ static int apply_microcode_amd(int cpu) /* check current patch id and patch's id for match */ if (rev != mc_amd->hdr.patch_id) { - pr_err("microcode: CPU%d: update failed " - "(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id); + pr_err("CPU%d: update failed (for patch_level=0x%x)\n", + cpu, mc_amd->hdr.patch_id); return -1; } - pr_info("microcode: CPU%d: updated (new patch_level=0x%x)\n", cpu, rev); + pr_info("CPU%d: updated (new patch_level=0x%x)\n", cpu, rev); uci->cpu_sig.rev = rev; return 0; @@ -169,15 +172,14 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) return NULL; if (section_hdr[0] != UCODE_UCODE_TYPE) { - pr_err("microcode: error: invalid type field in " - "container file section header\n"); + pr_err("error: invalid type field in container file section header\n"); return NULL; } total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8)); if (total_size > size || total_size > UCODE_MAX_SIZE) { - pr_err("microcode: error: size mismatch\n"); + pr_err("error: size mismatch\n"); return NULL; } @@ -206,14 +208,13 @@ static int install_equiv_cpu_table(const u8 *buf) size = buf_pos[2]; if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) { - pr_err("microcode: error: invalid type field in " - "container file section header\n"); + pr_err("error: invalid type field in container file section header\n"); return 0; } equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size); if (!equiv_cpu_table) { - pr_err("microcode: failed to allocate equivalent CPU table\n"); + pr_err("failed to allocate equivalent CPU table\n"); return 0; } @@ -246,7 +247,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) offset = install_equiv_cpu_table(ucode_ptr); if (!offset) { - pr_err("microcode: failed to create equivalent cpu table\n"); + pr_err("failed to create equivalent cpu table\n"); return UCODE_ERROR; } @@ -277,8 +278,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) if (!leftover) { vfree(uci->mc); uci->mc = new_mc; - pr_debug("microcode: CPU%d found a matching microcode " - "update with version 0x%x (current=0x%x)\n", + pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", cpu, new_rev, uci->cpu_sig.rev); } else { vfree(new_mc); @@ -300,7 +300,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) return UCODE_NFOUND; if (*(u32 *)firmware->data != UCODE_MAGIC) { - pr_err("microcode: invalid UCODE_MAGIC (0x%08x)\n", + pr_err("invalid UCODE_MAGIC (0x%08x)\n", *(u32 *)firmware->data); return UCODE_ERROR; } @@ -313,8 +313,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) static enum ucode_state request_microcode_user(int cpu, const void __user *buf, size_t size) { - pr_info("microcode: AMD microcode update via " - "/dev/cpu/microcode not supported\n"); + pr_info("AMD microcode update via /dev/cpu/microcode not supported\n"); return UCODE_ERROR; } @@ -334,14 +333,13 @@ void init_microcode_amd(struct device *device) WARN_ON(c->x86_vendor != X86_VENDOR_AMD); if (c->x86 < 0x10) { - pr_warning("microcode: AMD CPU family 0x%x not supported\n", - c->x86); + pr_warning("AMD CPU family 0x%x not supported\n", c->x86); return; } supported_cpu = 1; if (request_firmware(&firmware, fw_name, device)) - pr_err("microcode: failed to load file %s\n", fw_name); + pr_err("failed to load file %s\n", fw_name); } void fini_microcode_amd(void) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index e68aae397869..844c02c65fcb 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -70,6 +70,9 @@ * Fix sigmatch() macro to handle old CPUs with pf == 0. * Thanks to Stuart Swales for pointing out this bug. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/platform_device.h> #include <linux/miscdevice.h> #include <linux/capability.h> @@ -209,7 +212,7 @@ static ssize_t microcode_write(struct file *file, const char __user *buf, ssize_t ret = -EINVAL; if ((len >> PAGE_SHIFT) > totalram_pages) { - pr_err("microcode: too much data (max %ld pages)\n", totalram_pages); + pr_err("too much data (max %ld pages)\n", totalram_pages); return ret; } @@ -244,7 +247,7 @@ static int __init microcode_dev_init(void) error = misc_register(µcode_dev); if (error) { - pr_err("microcode: can't misc_register on minor=%d\n", MICROCODE_MINOR); + pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR); return error; } @@ -359,7 +362,7 @@ static enum ucode_state microcode_resume_cpu(int cpu) if (!uci->mc) return UCODE_NFOUND; - pr_debug("microcode: CPU%d updated upon resume\n", cpu); + pr_debug("CPU%d updated upon resume\n", cpu); apply_microcode_on_target(cpu); return UCODE_OK; @@ -379,7 +382,7 @@ static enum ucode_state microcode_init_cpu(int cpu) ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev); if (ustate == UCODE_OK) { - pr_debug("microcode: CPU%d updated upon init\n", cpu); + pr_debug("CPU%d updated upon init\n", cpu); apply_microcode_on_target(cpu); } @@ -406,7 +409,7 @@ static int mc_sysdev_add(struct sys_device *sys_dev) if (!cpu_online(cpu)) return 0; - pr_debug("microcode: CPU%d added\n", cpu); + pr_debug("CPU%d added\n", cpu); err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); if (err) @@ -425,7 +428,7 @@ static int mc_sysdev_remove(struct sys_device *sys_dev) if (!cpu_online(cpu)) return 0; - pr_debug("microcode: CPU%d removed\n", cpu); + pr_debug("CPU%d removed\n", cpu); microcode_fini_cpu(cpu); sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); return 0; @@ -473,15 +476,15 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) microcode_update_cpu(cpu); case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: - pr_debug("microcode: CPU%d added\n", cpu); + pr_debug("CPU%d added\n", cpu); if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) - pr_err("microcode: Failed to create group for CPU%d\n", cpu); + pr_err("Failed to create group for CPU%d\n", cpu); break; case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: /* Suspend is in progress, only remove the interface */ sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); - pr_debug("microcode: CPU%d removed\n", cpu); + pr_debug("CPU%d removed\n", cpu); break; case CPU_DEAD: case CPU_UP_CANCELED_FROZEN: @@ -507,7 +510,7 @@ static int __init microcode_init(void) microcode_ops = init_amd_microcode(); if (!microcode_ops) { - pr_err("microcode: no support for this CPU vendor\n"); + pr_err("no support for this CPU vendor\n"); return -ENODEV; } @@ -541,8 +544,7 @@ static int __init microcode_init(void) register_hotcpu_notifier(&mc_cpu_notifier); pr_info("Microcode Update Driver: v" MICROCODE_VERSION - " <tigran@aivazian.fsnet.co.uk>," - " Peter Oruba\n"); + " <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n"); return 0; } diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index 0d334ddd0a96..ebd193e476ca 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -70,6 +70,9 @@ * Fix sigmatch() macro to handle old CPUs with pf == 0. * Thanks to Stuart Swales for pointing out this bug. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/firmware.h> #include <linux/uaccess.h> #include <linux/kernel.h> @@ -146,8 +149,7 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || cpu_has(c, X86_FEATURE_IA64)) { - printk(KERN_ERR "microcode: CPU%d not a capable Intel " - "processor\n", cpu_num); + pr_err("CPU%d not a capable Intel processor\n", cpu_num); return -1; } @@ -165,8 +167,8 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); - printk(KERN_INFO "microcode: CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n", - cpu_num, csig->sig, csig->pf, csig->rev); + pr_info("CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n", + cpu_num, csig->sig, csig->pf, csig->rev); return 0; } @@ -194,28 +196,24 @@ static int microcode_sanity_check(void *mc) data_size = get_datasize(mc_header); if (data_size + MC_HEADER_SIZE > total_size) { - printk(KERN_ERR "microcode: error! " - "Bad data size in microcode data file\n"); + pr_err("error! Bad data size in microcode data file\n"); return -EINVAL; } if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { - printk(KERN_ERR "microcode: error! " - "Unknown microcode update format\n"); + pr_err("error! Unknown microcode update format\n"); return -EINVAL; } ext_table_size = total_size - (MC_HEADER_SIZE + data_size); if (ext_table_size) { if ((ext_table_size < EXT_HEADER_SIZE) || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { - printk(KERN_ERR "microcode: error! " - "Small exttable size in microcode data file\n"); + pr_err("error! Small exttable size in microcode data file\n"); return -EINVAL; } ext_header = mc + MC_HEADER_SIZE + data_size; if (ext_table_size != exttable_size(ext_header)) { - printk(KERN_ERR "microcode: error! " - "Bad exttable size in microcode data file\n"); + pr_err("error! Bad exttable size in microcode data file\n"); return -EFAULT; } ext_sigcount = ext_header->count; @@ -230,8 +228,7 @@ static int microcode_sanity_check(void *mc) while (i--) ext_table_sum += ext_tablep[i]; if (ext_table_sum) { - printk(KERN_WARNING "microcode: aborting, " - "bad extended signature table checksum\n"); + pr_warning("aborting, bad extended signature table checksum\n"); return -EINVAL; } } @@ -242,7 +239,7 @@ static int microcode_sanity_check(void *mc) while (i--) orig_sum += ((int *)mc)[i]; if (orig_sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); + pr_err("aborting, bad checksum\n"); return -EINVAL; } if (!ext_table_size) @@ -255,7 +252,7 @@ static int microcode_sanity_check(void *mc) - (mc_header->sig + mc_header->pf + mc_header->cksum) + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); if (sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); + pr_err("aborting, bad checksum\n"); return -EINVAL; } } @@ -327,13 +324,11 @@ static int apply_microcode(int cpu) rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); if (val[1] != mc_intel->hdr.rev) { - printk(KERN_ERR "microcode: CPU%d update " - "to revision 0x%x failed\n", - cpu_num, mc_intel->hdr.rev); + pr_err("CPU%d update to revision 0x%x failed\n", + cpu_num, mc_intel->hdr.rev); return -1; } - printk(KERN_INFO "microcode: CPU%d updated to revision " - "0x%x, date = %04x-%02x-%02x \n", + pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x \n", cpu_num, val[1], mc_intel->hdr.date & 0xffff, mc_intel->hdr.date >> 24, @@ -362,8 +357,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, mc_size = get_totalsize(&mc_header); if (!mc_size || mc_size > leftover) { - printk(KERN_ERR "microcode: error!" - "Bad data in microcode data file\n"); + pr_err("error! Bad data in microcode data file\n"); break; } @@ -405,9 +399,8 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, vfree(uci->mc); uci->mc = (struct microcode_intel *)new_mc; - pr_debug("microcode: CPU%d found a matching microcode update with" - " version 0x%x (current=0x%x)\n", - cpu, new_rev, uci->cpu_sig.rev); + pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", + cpu, new_rev, uci->cpu_sig.rev); out: return state; } @@ -429,7 +422,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) c->x86, c->x86_model, c->x86_mask); if (request_firmware(&firmware, name, device)) { - pr_debug("microcode: data file %s load failed\n", name); + pr_debug("data file %s load failed\n", name); return UCODE_NFOUND; } diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 5e2ba634ea15..7a7bd4e3ec49 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -10,6 +10,8 @@ #include <linux/clockchips.h> #include <linux/random.h> #include <linux/user-return-notifier.h> +#include <linux/dmi.h> +#include <linux/utsname.h> #include <trace/events/power.h> #include <linux/hw_breakpoint.h> #include <asm/system.h> @@ -90,6 +92,25 @@ void exit_thread(void) } } +void show_regs_common(void) +{ + const char *board, *product; + + board = dmi_get_system_info(DMI_BOARD_NAME); + if (!board) + board = ""; + product = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!product) + product = ""; + + printk("\n"); + printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", + current->pid, current->comm, print_tainted(), + init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version, board, product); +} + void flush_thread(void) { struct task_struct *tsk = current; diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 075580b35682..120b88797a75 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -23,7 +23,6 @@ #include <linux/vmalloc.h> #include <linux/user.h> #include <linux/interrupt.h> -#include <linux/utsname.h> #include <linux/delay.h> #include <linux/reboot.h> #include <linux/init.h> @@ -35,7 +34,6 @@ #include <linux/tick.h> #include <linux/percpu.h> #include <linux/prctl.h> -#include <linux/dmi.h> #include <linux/ftrace.h> #include <linux/uaccess.h> #include <linux/io.h> @@ -128,7 +126,6 @@ void __show_regs(struct pt_regs *regs, int all) unsigned long d0, d1, d2, d3, d6, d7; unsigned long sp; unsigned short ss, gs; - const char *board; if (user_mode_vm(regs)) { sp = regs->sp; @@ -140,16 +137,7 @@ void __show_regs(struct pt_regs *regs, int all) savesegment(gs, gs); } - printk("\n"); - - board = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!board) - board = ""; - printk("Pid: %d, comm: %s %s (%s %.*s) %s\n", - task_pid_nr(current), current->comm, - print_tainted(), init_utsname()->release, - (int)strcspn(init_utsname()->version, " "), - init_utsname()->version, board); + show_regs_common(); printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", (u16)regs->cs, regs->ip, regs->flags, diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index c95c8f4e790a..e5ab0cd0ef36 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -26,7 +26,6 @@ #include <linux/slab.h> #include <linux/user.h> #include <linux/interrupt.h> -#include <linux/utsname.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/ptrace.h> @@ -38,7 +37,6 @@ #include <linux/uaccess.h> #include <linux/io.h> #include <linux/ftrace.h> -#include <linux/dmi.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -163,18 +161,8 @@ void __show_regs(struct pt_regs *regs, int all) unsigned long d0, d1, d2, d3, d6, d7; unsigned int fsindex, gsindex; unsigned int ds, cs, es; - const char *board; - - printk("\n"); - print_modules(); - board = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!board) - board = ""; - printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s\n", - current->pid, current->comm, print_tainted(), - init_utsname()->release, - (int)strcspn(init_utsname()->version, " "), - init_utsname()->version, board); + + show_regs_common(); printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); printk_address(regs->ip, 1); printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 04d182a7cfdb..7079ddaf0731 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -555,7 +555,9 @@ static int genregs_set(struct task_struct *target, return ret; } -static void ptrace_triggered(struct perf_event *bp, void *data) +static void ptrace_triggered(struct perf_event *bp, int nmi, + struct perf_sample_data *data, + struct pt_regs *regs) { int i; struct thread_struct *thread = &(current->thread); @@ -593,13 +595,13 @@ static unsigned long ptrace_get_dr7(struct perf_event *bp[]) return dr7; } -static struct perf_event * +static int ptrace_modify_breakpoint(struct perf_event *bp, int len, int type, struct task_struct *tsk, int disabled) { int err; int gen_len, gen_type; - DEFINE_BREAKPOINT_ATTR(attr); + struct perf_event_attr attr; /* * We shoud have at least an inactive breakpoint at this @@ -607,18 +609,18 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type, * written the address register first */ if (!bp) - return ERR_PTR(-EINVAL); + return -EINVAL; err = arch_bp_generic_fields(len, type, &gen_len, &gen_type); if (err) - return ERR_PTR(err); + return err; attr = bp->attr; attr.bp_len = gen_len; attr.bp_type = gen_type; attr.disabled = disabled; - return modify_user_hw_breakpoint(bp, &attr, bp->callback, tsk); + return modify_user_hw_breakpoint(bp, &attr); } /* @@ -656,28 +658,17 @@ restore: if (!second_pass) continue; - thread->ptrace_bps[i] = NULL; - bp = ptrace_modify_breakpoint(bp, len, type, + rc = ptrace_modify_breakpoint(bp, len, type, tsk, 1); - if (IS_ERR(bp)) { - rc = PTR_ERR(bp); - thread->ptrace_bps[i] = NULL; + if (rc) break; - } - thread->ptrace_bps[i] = bp; } continue; } - bp = ptrace_modify_breakpoint(bp, len, type, tsk, 0); - - /* Incorrect bp, or we have a bug in bp API */ - if (IS_ERR(bp)) { - rc = PTR_ERR(bp); - thread->ptrace_bps[i] = NULL; + rc = ptrace_modify_breakpoint(bp, len, type, tsk, 0); + if (rc) break; - } - thread->ptrace_bps[i] = bp; } /* * Make a second pass to free the remaining unused breakpoints @@ -721,9 +712,10 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, { struct perf_event *bp; struct thread_struct *t = &tsk->thread; - DEFINE_BREAKPOINT_ATTR(attr); + struct perf_event_attr attr; if (!t->ptrace_bps[nr]) { + hw_breakpoint_init(&attr); /* * Put stub len and type to register (reserve) an inactive but * correct bp @@ -734,26 +726,32 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, attr.disabled = 1; bp = register_user_hw_breakpoint(&attr, ptrace_triggered, tsk); + + /* + * CHECKME: the previous code returned -EIO if the addr wasn't + * a valid task virtual addr. The new one will return -EINVAL in + * this case. + * -EINVAL may be what we want for in-kernel breakpoints users, + * but -EIO looks better for ptrace, since we refuse a register + * writing for the user. And anyway this is the previous + * behaviour. + */ + if (IS_ERR(bp)) + return PTR_ERR(bp); + + t->ptrace_bps[nr] = bp; } else { + int err; + bp = t->ptrace_bps[nr]; - t->ptrace_bps[nr] = NULL; attr = bp->attr; attr.bp_addr = addr; - bp = modify_user_hw_breakpoint(bp, &attr, bp->callback, tsk); + err = modify_user_hw_breakpoint(bp, &attr); + if (err) + return err; } - /* - * CHECKME: the previous code returned -EIO if the addr wasn't a - * valid task virtual addr. The new one will return -EINVAL in this - * case. - * -EINVAL may be what we want for in-kernel breakpoints users, but - * -EIO looks better for ptrace, since we refuse a register writing - * for the user. And anyway this is the previous behaviour. - */ - if (IS_ERR(bp)) - return PTR_ERR(bp); - t->ptrace_bps[nr] = bp; return 0; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2b97fc5b124e..1545bc0c9845 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -259,6 +259,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), }, }, + { /* Handle problems with rebooting on ASUS P4S800 */ + .callback = set_bios_reboot, + .ident = "ASUS P4S800", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4S800"), + }, + }, { } }; diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index d559af913e1f..35abcb8b00e9 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -1,3 +1,5 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -20,9 +22,9 @@ #include <asm/stackprotector.h> #ifdef CONFIG_DEBUG_PER_CPU_MAPS -# define DBG(x...) printk(KERN_DEBUG x) +# define DBG(fmt, ...) pr_dbg(fmt, ##__VA_ARGS__) #else -# define DBG(x...) +# define DBG(fmt, ...) do { if (0) pr_dbg(fmt, ##__VA_ARGS__); } while (0) #endif DEFINE_PER_CPU(int, cpu_number); @@ -116,8 +118,8 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, } else { ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node), size, align, goal); - pr_debug("per cpu data for cpu%d %lu bytes on node%d at " - "%016lx\n", cpu, size, node, __pa(ptr)); + pr_debug("per cpu data for cpu%d %lu bytes on node%d at %016lx\n", + cpu, size, node, __pa(ptr)); } return ptr; #else @@ -198,8 +200,7 @@ void __init setup_per_cpu_areas(void) pcpu_cpu_distance, pcpu_fc_alloc, pcpu_fc_free); if (rc < 0) - pr_warning("PERCPU: %s allocator failed (%d), " - "falling back to page size\n", + pr_warning("%s allocator failed (%d), falling back to page size\n", pcpu_fc_names[pcpu_chosen_fc], rc); } if (rc < 0) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 324f2a44c221..29e6744f51e3 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -687,7 +687,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), }; - INIT_WORK(&c_idle.work, do_fork_idle); + INIT_WORK_ON_STACK(&c_idle.work, do_fork_idle); alternatives_smp_switch(1); @@ -713,6 +713,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) if (IS_ERR(c_idle.idle)) { printk("failed fork for CPU %d\n", cpu); + destroy_work_on_stack(&c_idle.work); return PTR_ERR(c_idle.idle); } @@ -831,6 +832,7 @@ do_rest: smpboot_restore_warm_reset_vector(); } + destroy_work_on_stack(&c_idle.work); return boot_error; } diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c index 1884a8d12bfa..dee1ff7cba58 100644 --- a/arch/x86/kernel/sys_i386_32.c +++ b/arch/x86/kernel/sys_i386_32.c @@ -24,31 +24,6 @@ #include <asm/syscalls.h> -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file *file = NULL; - struct mm_struct *mm = current->mm; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(&mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(&mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux/i386 didn't use to be able to handle more than @@ -77,7 +52,7 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) goto out; - err = sys_mmap2(a.addr, a.len, a.prot, a.flags, + err = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); out: return err; diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index 45e00eb09c3a..8aa2057efd12 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -23,26 +23,11 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, unsigned long, fd, unsigned long, off) { long error; - struct file *file; - error = -EINVAL; if (off & ~PAGE_MASK) goto out; - error = -EBADF; - file = NULL; - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, off >> PAGE_SHIFT); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); + error = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); out: return error; } diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index 70c2125d55b9..15228b5d3eb7 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -191,7 +191,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* reserved for streams2 */ .long ptregs_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap_pgoff .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index 611b9e2360d3..74c92bb194df 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -226,7 +226,7 @@ static void __devinit vmi_time_init_clockevent(void) evt->min_delta_ns = clockevent_delta2ns(1, evt); evt->cpumask = cpumask_of(cpu); - printk(KERN_WARNING "vmi: registering clock event %s. mult=%lu shift=%u\n", + printk(KERN_WARNING "vmi: registering clock event %s. mult=%u shift=%u\n", evt->name, evt->mult, evt->shift); clockevents_register_device(evt); } diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index e02d92d12bcd..9055e5872ff0 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -73,7 +73,8 @@ void update_vsyscall_tz(void) write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags); } -void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) +void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, + u32 mult) { unsigned long flags; @@ -82,7 +83,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) vsyscall_gtod_data.clock.vread = clock->vread; vsyscall_gtod_data.clock.cycle_last = clock->cycle_last; vsyscall_gtod_data.clock.mask = clock->mask; - vsyscall_gtod_data.clock.mult = clock->mult; + vsyscall_gtod_data.clock.mult = mult; vsyscall_gtod_data.clock.shift = clock->shift; vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec; vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec; diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index fab7440c9bb2..296aba49472a 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -29,6 +29,8 @@ * Based on QEMU and Xen. */ +#define pr_fmt(fmt) "pit: " fmt + #include <linux/kvm_host.h> #include "irq.h" @@ -262,7 +264,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu) static void destroy_pit_timer(struct kvm_timer *pt) { - pr_debug("pit: execute del timer!\n"); + pr_debug("execute del timer!\n"); hrtimer_cancel(&pt->timer); } @@ -284,7 +286,7 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period) interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ); - pr_debug("pit: create pit timer, interval is %llu nsec\n", interval); + pr_debug("create pit timer, interval is %llu nsec\n", interval); /* TODO The new value only affected after the retriggered */ hrtimer_cancel(&pt->timer); @@ -309,7 +311,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val) WARN_ON(!mutex_is_locked(&ps->lock)); - pr_debug("pit: load_count val is %d, channel is %d\n", val, channel); + pr_debug("load_count val is %d, channel is %d\n", val, channel); /* * The largest possible initial count is 0; this is equivalent @@ -395,8 +397,8 @@ static int pit_ioport_write(struct kvm_io_device *this, mutex_lock(&pit_state->lock); if (val != 0) - pr_debug("pit: write addr is 0x%x, len is %d, val is 0x%x\n", - (unsigned int)addr, len, val); + pr_debug("write addr is 0x%x, len is %d, val is 0x%x\n", + (unsigned int)addr, len, val); if (addr == 3) { channel = val >> 6; diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index a2d6472895fb..45b20e486c2f 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -5,7 +5,7 @@ inat_tables_script = $(srctree)/arch/x86/tools/gen-insn-attr-x86.awk inat_tables_maps = $(srctree)/arch/x86/lib/x86-opcode-map.txt quiet_cmd_inat_tables = GEN $@ - cmd_inat_tables = $(AWK) -f $(inat_tables_script) $(inat_tables_maps) > $@ + cmd_inat_tables = $(AWK) -f $(inat_tables_script) $(inat_tables_maps) > $@ || rm -f $@ $(obj)/inat-tables.c: $(inat_tables_script) $(inat_tables_maps) $(call cmd,inat_tables) @@ -20,7 +20,7 @@ lib-y := delay.o lib-y += thunk_$(BITS).o lib-y += usercopy_$(BITS).o getuser.o putuser.o lib-y += memcpy_$(BITS).o -lib-y += insn.o inat.o +lib-$(CONFIG_KPROBES) += insn.o inat.o obj-y += msr-reg.o msr-reg-export.o diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 11a4ad4d6253..c0f6198565eb 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -5,6 +5,8 @@ * 2008 Pekka Paalanen <pq@iki.fi> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/list.h> #include <linux/rculist.h> #include <linux/spinlock.h> @@ -136,7 +138,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear) pte_t *pte = lookup_address(f->page, &level); if (!pte) { - pr_err("kmmio: no pte for page 0x%08lx\n", f->page); + pr_err("no pte for page 0x%08lx\n", f->page); return -1; } @@ -148,7 +150,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear) clear_pte_presence(pte, clear, &f->old_presence); break; default: - pr_err("kmmio: unexpected page level 0x%x.\n", level); + pr_err("unexpected page level 0x%x.\n", level); return -1; } @@ -170,13 +172,14 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear) static int arm_kmmio_fault_page(struct kmmio_fault_page *f) { int ret; - WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n"); + WARN_ONCE(f->armed, KERN_ERR pr_fmt("kmmio page already armed.\n")); if (f->armed) { - pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n", - f->page, f->count, !!f->old_presence); + pr_warning("double-arm: page 0x%08lx, ref %d, old %d\n", + f->page, f->count, !!f->old_presence); } ret = clear_page_presence(f, true); - WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page); + WARN_ONCE(ret < 0, KERN_ERR pr_fmt("arming 0x%08lx failed.\n"), + f->page); f->armed = true; return ret; } @@ -203,7 +206,7 @@ static void disarm_kmmio_fault_page(struct kmmio_fault_page *f) */ /* * Interrupts are disabled on entry as trap3 is an interrupt gate - * and they remain disabled thorough out this function. + * and they remain disabled throughout this function. */ int kmmio_handler(struct pt_regs *regs, unsigned long addr) { @@ -240,24 +243,21 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) * condition needs handling by do_page_fault(), the * page really not being present is the most common. */ - pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n", - addr, smp_processor_id()); + pr_debug("secondary hit for 0x%08lx CPU %d.\n", + addr, smp_processor_id()); if (!faultpage->old_presence) - pr_info("kmmio: unexpected secondary hit for " - "address 0x%08lx on CPU %d.\n", addr, - smp_processor_id()); + pr_info("unexpected secondary hit for address 0x%08lx on CPU %d.\n", + addr, smp_processor_id()); } else { /* * Prevent overwriting already in-flight context. * This should not happen, let's hope disarming at * least prevents a panic. */ - pr_emerg("kmmio: recursive probe hit on CPU %d, " - "for address 0x%08lx. Ignoring.\n", - smp_processor_id(), addr); - pr_emerg("kmmio: previous hit was at 0x%08lx.\n", - ctx->addr); + pr_emerg("recursive probe hit on CPU %d, for address 0x%08lx. Ignoring.\n", + smp_processor_id(), addr); + pr_emerg("previous hit was at 0x%08lx.\n", ctx->addr); disarm_kmmio_fault_page(faultpage); } goto no_kmmio_ctx; @@ -302,7 +302,7 @@ no_kmmio: /* * Interrupts are disabled on entry as trap1 is an interrupt gate - * and they remain disabled thorough out this function. + * and they remain disabled throughout this function. * This must always get called as the pair to kmmio_handler(). */ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) @@ -316,8 +316,8 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) * something external causing them (f.e. using a debugger while * mmio tracing enabled), or erroneous behaviour */ - pr_warning("kmmio: unexpected debug trap on CPU %d.\n", - smp_processor_id()); + pr_warning("unexpected debug trap on CPU %d.\n", + smp_processor_id()); goto out; } @@ -425,7 +425,7 @@ int register_kmmio_probe(struct kmmio_probe *p) list_add_rcu(&p->list, &kmmio_probes); while (size < size_lim) { if (add_kmmio_fault_page(p->addr + size)) - pr_err("kmmio: Unable to set page fault.\n"); + pr_err("Unable to set page fault.\n"); size += PAGE_SIZE; } out: @@ -490,7 +490,7 @@ static void remove_kmmio_fault_pages(struct rcu_head *head) * 2. remove_kmmio_fault_pages() * Remove the pages from kmmio_page_table. * 3. rcu_free_kmmio_fault_pages() - * Actally free the kmmio_fault_page structs as with RCU. + * Actually free the kmmio_fault_page structs as with RCU. */ void unregister_kmmio_probe(struct kmmio_probe *p) { @@ -511,7 +511,7 @@ void unregister_kmmio_probe(struct kmmio_probe *p) drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); if (!drelease) { - pr_crit("kmmio: leaking kmmio_fault_page objects.\n"); + pr_crit("leaking kmmio_fault_page objects.\n"); return; } drelease->release_list = release_list; diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 132772a8ec57..4c765e9c4664 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -19,6 +19,9 @@ * * Derived from the read-mod example from relay-examples by Tom Zanussi. */ + +#define pr_fmt(fmt) "mmiotrace: " + #define DEBUG 1 #include <linux/module.h> @@ -36,8 +39,6 @@ #include "pf_in.h" -#define NAME "mmiotrace: " - struct trap_reason { unsigned long addr; unsigned long ip; @@ -96,17 +97,18 @@ static void print_pte(unsigned long address) pte_t *pte = lookup_address(address, &level); if (!pte) { - pr_err(NAME "Error in %s: no pte for page 0x%08lx\n", - __func__, address); + pr_err("Error in %s: no pte for page 0x%08lx\n", + __func__, address); return; } if (level == PG_LEVEL_2M) { - pr_emerg(NAME "4MB pages are not currently supported: " - "0x%08lx\n", address); + pr_emerg("4MB pages are not currently supported: 0x%08lx\n", + address); BUG(); } - pr_info(NAME "pte for 0x%lx: 0x%llx 0x%llx\n", address, + pr_info("pte for 0x%lx: 0x%llx 0x%llx\n", + address, (unsigned long long)pte_val(*pte), (unsigned long long)pte_val(*pte) & _PAGE_PRESENT); } @@ -118,22 +120,21 @@ static void print_pte(unsigned long address) static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) { const struct trap_reason *my_reason = &get_cpu_var(pf_reason); - pr_emerg(NAME "unexpected fault for address: 0x%08lx, " - "last fault for address: 0x%08lx\n", - addr, my_reason->addr); + pr_emerg("unexpected fault for address: 0x%08lx, last fault for address: 0x%08lx\n", + addr, my_reason->addr); print_pte(addr); print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip); #ifdef __i386__ pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", - regs->ax, regs->bx, regs->cx, regs->dx); + regs->ax, regs->bx, regs->cx, regs->dx); pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", - regs->si, regs->di, regs->bp, regs->sp); + regs->si, regs->di, regs->bp, regs->sp); #else pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", - regs->ax, regs->cx, regs->dx); + regs->ax, regs->cx, regs->dx); pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", - regs->si, regs->di, regs->bp, regs->sp); + regs->si, regs->di, regs->bp, regs->sp); #endif put_cpu_var(pf_reason); BUG(); @@ -213,7 +214,7 @@ static void post(struct kmmio_probe *p, unsigned long condition, /* this should always return the active_trace count to 0 */ my_reason->active_traces--; if (my_reason->active_traces) { - pr_emerg(NAME "unexpected post handler"); + pr_emerg("unexpected post handler"); BUG(); } @@ -244,7 +245,7 @@ static void ioremap_trace_core(resource_size_t offset, unsigned long size, }; if (!trace) { - pr_err(NAME "kmalloc failed in ioremap\n"); + pr_err("kmalloc failed in ioremap\n"); return; } @@ -282,8 +283,8 @@ void mmiotrace_ioremap(resource_size_t offset, unsigned long size, if (!is_enabled()) /* recheck and proper locking in *_core() */ return; - pr_debug(NAME "ioremap_*(0x%llx, 0x%lx) = %p\n", - (unsigned long long)offset, size, addr); + pr_debug("ioremap_*(0x%llx, 0x%lx) = %p\n", + (unsigned long long)offset, size, addr); if ((filter_offset) && (offset != filter_offset)) return; ioremap_trace_core(offset, size, addr); @@ -301,7 +302,7 @@ static void iounmap_trace_core(volatile void __iomem *addr) struct remap_trace *tmp; struct remap_trace *found_trace = NULL; - pr_debug(NAME "Unmapping %p.\n", addr); + pr_debug("Unmapping %p.\n", addr); spin_lock_irq(&trace_lock); if (!is_enabled()) @@ -363,9 +364,8 @@ static void clear_trace_list(void) * Caller also ensures is_enabled() cannot change. */ list_for_each_entry(trace, &trace_list, list) { - pr_notice(NAME "purging non-iounmapped " - "trace @0x%08lx, size 0x%lx.\n", - trace->probe.addr, trace->probe.len); + pr_notice("purging non-iounmapped trace @0x%08lx, size 0x%lx.\n", + trace->probe.addr, trace->probe.len); if (!nommiotrace) unregister_kmmio_probe(&trace->probe); } @@ -387,7 +387,7 @@ static void enter_uniprocessor(void) if (downed_cpus == NULL && !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) { - pr_notice(NAME "Failed to allocate mask\n"); + pr_notice("Failed to allocate mask\n"); goto out; } @@ -395,20 +395,19 @@ static void enter_uniprocessor(void) cpumask_copy(downed_cpus, cpu_online_mask); cpumask_clear_cpu(cpumask_first(cpu_online_mask), downed_cpus); if (num_online_cpus() > 1) - pr_notice(NAME "Disabling non-boot CPUs...\n"); + pr_notice("Disabling non-boot CPUs...\n"); put_online_cpus(); for_each_cpu(cpu, downed_cpus) { err = cpu_down(cpu); if (!err) - pr_info(NAME "CPU%d is down.\n", cpu); + pr_info("CPU%d is down.\n", cpu); else - pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err); + pr_err("Error taking CPU%d down: %d\n", cpu, err); } out: if (num_online_cpus() > 1) - pr_warning(NAME "multiple CPUs still online, " - "may miss events.\n"); + pr_warning("multiple CPUs still online, may miss events.\n"); } /* __ref because leave_uniprocessor calls cpu_up which is __cpuinit, @@ -420,13 +419,13 @@ static void __ref leave_uniprocessor(void) if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) return; - pr_notice(NAME "Re-enabling CPUs...\n"); + pr_notice("Re-enabling CPUs...\n"); for_each_cpu(cpu, downed_cpus) { err = cpu_up(cpu); if (!err) - pr_info(NAME "enabled CPU%d.\n", cpu); + pr_info("enabled CPU%d.\n", cpu); else - pr_err(NAME "cannot re-enable CPU%d: %d\n", cpu, err); + pr_err("cannot re-enable CPU%d: %d\n", cpu, err); } } @@ -434,8 +433,8 @@ static void __ref leave_uniprocessor(void) static void enter_uniprocessor(void) { if (num_online_cpus() > 1) - pr_warning(NAME "multiple CPUs are online, may miss events. " - "Suggest booting with maxcpus=1 kernel argument.\n"); + pr_warning("multiple CPUs are online, may miss events. " + "Suggest booting with maxcpus=1 kernel argument.\n"); } static void leave_uniprocessor(void) @@ -450,13 +449,13 @@ void enable_mmiotrace(void) goto out; if (nommiotrace) - pr_info(NAME "MMIO tracing disabled.\n"); + pr_info("MMIO tracing disabled.\n"); kmmio_init(); enter_uniprocessor(); spin_lock_irq(&trace_lock); atomic_inc(&mmiotrace_enabled); spin_unlock_irq(&trace_lock); - pr_info(NAME "enabled.\n"); + pr_info("enabled.\n"); out: mutex_unlock(&mmiotrace_mutex); } @@ -475,7 +474,7 @@ void disable_mmiotrace(void) clear_trace_list(); /* guarantees: no more kmmio callbacks */ leave_uniprocessor(); kmmio_cleanup(); - pr_info(NAME "disabled.\n"); + pr_info("disabled.\n"); out: mutex_unlock(&mmiotrace_mutex); } diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 66b55d6e69ed..ae9648eb1c7f 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -704,9 +704,8 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, if (!range_is_allowed(pfn, size)) return 0; - if (file->f_flags & O_SYNC) { + if (file->f_flags & O_DSYNC) flags = _PAGE_CACHE_UC_MINUS; - } #ifdef CONFIG_X86_32 /* diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index d49202e740ea..564b008a51c7 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -15,3 +15,8 @@ obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-y += common.o early.o obj-y += amd_bus.o +obj-$(CONFIG_X86_64) += bus_numa.o intel_bus.o + +ifeq ($(CONFIG_PCI_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 1014eb4bfc37..959e548a7039 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -7,6 +7,7 @@ #include <asm/pci_x86.h> struct pci_root_info { + struct acpi_device *bridge; char *name; unsigned int res_num; struct resource *res; @@ -58,6 +59,30 @@ bus_has_transparent_bridge(struct pci_bus *bus) return false; } +static void +align_resource(struct acpi_device *bridge, struct resource *res) +{ + int align = (res->flags & IORESOURCE_MEM) ? 16 : 4; + + /* + * Host bridge windows are not BARs, but the decoders on the PCI side + * that claim this address space have starting alignment and length + * constraints, so fix any obvious BIOS goofs. + */ + if (!IS_ALIGNED(res->start, align)) { + dev_printk(KERN_DEBUG, &bridge->dev, + "host bridge window %pR invalid; " + "aligning start to %d-byte boundary\n", res, align); + res->start &= ~(align - 1); + } + if (!IS_ALIGNED(res->end + 1, align)) { + dev_printk(KERN_DEBUG, &bridge->dev, + "host bridge window %pR invalid; " + "aligning end to %d-byte boundary\n", res, align); + res->end = ALIGN(res->end, align) - 1; + } +} + static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data) { @@ -91,11 +116,12 @@ setup_resource(struct acpi_resource *acpi_res, void *data) start = addr.minimum + addr.translation_offset; end = start + addr.address_length - 1; if (info->res_num >= max_root_bus_resources) { - printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx " - "from %s for %s due to _CRS returning more than " - "%d resource descriptors\n", (unsigned long) start, - (unsigned long) end, root->name, info->name, - max_root_bus_resources); + if (pci_probe & PCI_USE__CRS) + printk(KERN_WARNING "PCI: Failed to allocate " + "0x%lx-0x%lx from %s for %s due to _CRS " + "returning more than %d resource descriptors\n", + (unsigned long) start, (unsigned long) end, + root->name, info->name, max_root_bus_resources); return AE_OK; } @@ -105,14 +131,28 @@ setup_resource(struct acpi_resource *acpi_res, void *data) res->start = start; res->end = end; res->child = NULL; + align_resource(info->bridge, res); + + if (!(pci_probe & PCI_USE__CRS)) { + dev_printk(KERN_DEBUG, &info->bridge->dev, + "host bridge window %pR (ignored)\n", res); + return AE_OK; + } if (insert_resource(root, res)) { - printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " - "from %s for %s\n", (unsigned long) res->start, - (unsigned long) res->end, root->name, info->name); + dev_err(&info->bridge->dev, + "can't allocate host bridge window %pR\n", res); } else { info->bus->resource[info->res_num] = res; info->res_num++; + if (addr.translation_offset) + dev_info(&info->bridge->dev, "host bridge window %pR " + "(PCI address [%#llx-%#llx])\n", + res, res->start - addr.translation_offset, + res->end - addr.translation_offset); + else + dev_info(&info->bridge->dev, + "host bridge window %pR\n", res); } return AE_OK; } @@ -124,6 +164,12 @@ get_current_resources(struct acpi_device *device, int busnum, struct pci_root_info info; size_t size; + if (!(pci_probe & PCI_USE__CRS)) + dev_info(&device->dev, + "ignoring host bridge windows from ACPI; " + "boot with \"pci=use_crs\" to use them\n"); + + info.bridge = device; info.bus = bus; info.res_num = 0; acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource, @@ -163,8 +209,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do #endif if (domain && !pci_domains_supported) { - printk(KERN_WARNING "PCI: Multiple domains not supported " - "(dom %d, bus %d)\n", domain, busnum); + printk(KERN_WARNING "pci_bus %04x:%02x: " + "ignored (multiple domains not supported)\n", + domain, busnum); return NULL; } @@ -188,7 +235,8 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do */ sd = kzalloc(sizeof(*sd), GFP_KERNEL); if (!sd) { - printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); + printk(KERN_WARNING "pci_bus %04x:%02x: " + "ignored (out of memory)\n", domain, busnum); return NULL; } @@ -209,9 +257,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do } else { bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd); if (bus) { - if (pci_probe & PCI_USE__CRS) - get_current_resources(device, busnum, domain, - bus); + get_current_resources(device, busnum, domain, bus); bus->subordinate = pci_scan_child_bus(bus); } } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 572ee9782f2a..95ecbd495955 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -6,10 +6,10 @@ #ifdef CONFIG_X86_64 #include <asm/pci-direct.h> -#include <asm/mpspec.h> -#include <linux/cpumask.h> #endif +#include "bus_numa.h" + /* * This discovers the pcibus <-> node mapping on AMD K8. * also get peer root bus resource for io,mmio @@ -17,67 +17,6 @@ #ifdef CONFIG_X86_64 -/* - * sub bus (transparent) will use entres from 3 to store extra from root, - * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES? - */ -#define RES_NUM 16 -struct pci_root_info { - char name[12]; - unsigned int res_num; - struct resource res[RES_NUM]; - int bus_min; - int bus_max; - int node; - int link; -}; - -/* 4 at this time, it may become to 32 */ -#define PCI_ROOT_NR 4 -static int pci_root_num; -static struct pci_root_info pci_root_info[PCI_ROOT_NR]; - -void x86_pci_root_bus_res_quirks(struct pci_bus *b) -{ - int i; - int j; - struct pci_root_info *info; - - /* don't go for it if _CRS is used already */ - if (b->resource[0] != &ioport_resource || - b->resource[1] != &iomem_resource) - return; - - /* if only one root bus, don't need to anything */ - if (pci_root_num < 2) - return; - - for (i = 0; i < pci_root_num; i++) { - if (pci_root_info[i].bus_min == b->number) - break; - } - - if (i == pci_root_num) - return; - - printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", - b->number); - - info = &pci_root_info[i]; - for (j = 0; j < info->res_num; j++) { - struct resource *res; - struct resource *root; - - res = &info->res[j]; - b->resource[j] = res; - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - else - root = &iomem_resource; - insert_resource(root, res); - } -} - #define RANGE_NUM 16 struct res_range { @@ -130,52 +69,6 @@ static void __init update_range(struct res_range *range, size_t start, } } -static void __init update_res(struct pci_root_info *info, size_t start, - size_t end, unsigned long flags, int merge) -{ - int i; - struct resource *res; - - if (!merge) - goto addit; - - /* try to merge it with old one */ - for (i = 0; i < info->res_num; i++) { - size_t final_start, final_end; - size_t common_start, common_end; - - res = &info->res[i]; - if (res->flags != flags) - continue; - - common_start = max((size_t)res->start, start); - common_end = min((size_t)res->end, end); - if (common_start > common_end + 1) - continue; - - final_start = min((size_t)res->start, start); - final_end = max((size_t)res->end, end); - - res->start = final_start; - res->end = final_end; - return; - } - -addit: - - /* need to add that */ - if (info->res_num >= RES_NUM) - return; - - res = &info->res[info->res_num]; - res->name = info->name; - res->flags = flags; - res->start = start; - res->end = end; - res->child = NULL; - info->res_num++; -} - struct pci_hostbridge_probe { u32 bus; u32 slot; @@ -230,7 +123,6 @@ static int __init early_fill_mp_bus_info(void) int j; unsigned bus; unsigned slot; - int found; int node; int link; int def_node; @@ -247,7 +139,7 @@ static int __init early_fill_mp_bus_info(void) if (!early_pci_allowed()) return -1; - found = 0; + found_all_numa_early = 0; for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { u32 id; u16 device; @@ -261,12 +153,12 @@ static int __init early_fill_mp_bus_info(void) device = (id>>16) & 0xffff; if (pci_probes[i].vendor == vendor && pci_probes[i].device == device) { - found = 1; + found_all_numa_early = 1; break; } } - if (!found) + if (!found_all_numa_early) return 0; pci_root_num = 0; @@ -488,7 +380,7 @@ static int __init early_fill_mp_bus_info(void) info = &pci_root_info[i]; res_num = info->res_num; busnum = info->bus_min; - printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n", + printk(KERN_DEBUG "bus: [%02x, %02x] on node %x link %x\n", info->bus_min, info->bus_max, info->node, info->link); for (j = 0; j < res_num; j++) { res = &info->res[j]; diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c new file mode 100644 index 000000000000..145df00e0387 --- /dev/null +++ b/arch/x86/pci/bus_numa.c @@ -0,0 +1,101 @@ +#include <linux/init.h> +#include <linux/pci.h> + +#include "bus_numa.h" + +int pci_root_num; +struct pci_root_info pci_root_info[PCI_ROOT_NR]; +int found_all_numa_early; + +void x86_pci_root_bus_res_quirks(struct pci_bus *b) +{ + int i; + int j; + struct pci_root_info *info; + + /* don't go for it if _CRS is used already */ + if (b->resource[0] != &ioport_resource || + b->resource[1] != &iomem_resource) + return; + + if (!pci_root_num) + return; + + /* for amd, if only one root bus, don't need to do anything */ + if (pci_root_num < 2 && found_all_numa_early) + return; + + for (i = 0; i < pci_root_num; i++) { + if (pci_root_info[i].bus_min == b->number) + break; + } + + if (i == pci_root_num) + return; + + printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", + b->number); + + info = &pci_root_info[i]; + for (j = 0; j < info->res_num; j++) { + struct resource *res; + struct resource *root; + + res = &info->res[j]; + b->resource[j] = res; + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + else + root = &iomem_resource; + insert_resource(root, res); + } +} + +void __init update_res(struct pci_root_info *info, size_t start, + size_t end, unsigned long flags, int merge) +{ + int i; + struct resource *res; + + if (start > end) + return; + + if (!merge) + goto addit; + + /* try to merge it with old one */ + for (i = 0; i < info->res_num; i++) { + size_t final_start, final_end; + size_t common_start, common_end; + + res = &info->res[i]; + if (res->flags != flags) + continue; + + common_start = max((size_t)res->start, start); + common_end = min((size_t)res->end, end); + if (common_start > common_end + 1) + continue; + + final_start = min((size_t)res->start, start); + final_end = max((size_t)res->end, end); + + res->start = final_start; + res->end = final_end; + return; + } + +addit: + + /* need to add that */ + if (info->res_num >= RES_NUM) + return; + + res = &info->res[info->res_num]; + res->name = info->name; + res->flags = flags; + res->start = start; + res->end = end; + res->child = NULL; + info->res_num++; +} diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h new file mode 100644 index 000000000000..adbc23fe82ac --- /dev/null +++ b/arch/x86/pci/bus_numa.h @@ -0,0 +1,27 @@ +#ifdef CONFIG_X86_64 + +/* + * sub bus (transparent) will use entres from 3 to store extra from + * root, so need to make sure we have enough slot there, Should we + * increase PCI_BUS_NUM_RESOURCES? + */ +#define RES_NUM 16 +struct pci_root_info { + char name[12]; + unsigned int res_num; + struct resource res[RES_NUM]; + int bus_min; + int bus_max; + int node; + int link; +}; + +/* 4 at this time, it may become to 32 */ +#define PCI_ROOT_NR 4 +extern int pci_root_num; +extern struct pci_root_info pci_root_info[PCI_ROOT_NR]; +extern int found_all_numa_early; + +extern void update_res(struct pci_root_info *info, size_t start, + size_t end, unsigned long flags, int merge); +#endif diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 1331fcf26143..d2552c68e94d 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -410,8 +410,6 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) return bus; } -extern u8 pci_cache_line_size; - int __init pcibios_init(void) { struct cpuinfo_x86 *c = &boot_cpu_data; @@ -422,15 +420,19 @@ int __init pcibios_init(void) } /* - * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8 - * and P4. It's also good for 386/486s (which actually have 16) + * Set PCI cacheline size to that of the CPU if the CPU has reported it. + * (For older CPUs that don't support cpuid, we se it to 32 bytes + * It's also good for 386/486s (which actually have 16) * as quite a few PCI devices do not support smaller values. */ - pci_cache_line_size = 32 >> 2; - if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD) - pci_cache_line_size = 64 >> 2; /* K7 & K8 */ - else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL) - pci_cache_line_size = 128 >> 2; /* P4 */ + if (c->x86_clflush_size > 0) { + pci_dfl_cache_line_size = c->x86_clflush_size >> 2; + printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n", + pci_dfl_cache_line_size << 2); + } else { + pci_dfl_cache_line_size = 32 >> 2; + printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n"); + } pcibios_resource_survey(); diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c index aaf26ae58cd5..d1067d539bee 100644 --- a/arch/x86/pci/early.c +++ b/arch/x86/pci/early.c @@ -12,8 +12,6 @@ u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset) u32 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inl(0xcfc); - if (v != 0xffffffff) - pr_debug("%x reading 4 from %x: %x\n", slot, offset, v); return v; } @@ -22,7 +20,6 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset) u8 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inb(0xcfc + (offset&3)); - pr_debug("%x reading 1 from %x: %x\n", slot, offset, v); return v; } @@ -31,28 +28,24 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset) u16 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inw(0xcfc + (offset&2)); - pr_debug("%x reading 2 from %x: %x\n", slot, offset, v); return v; } void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outl(val, 0xcfc); } void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outb(val, 0xcfc + (offset&3)); } void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outw(val, 0xcfc + (offset&2)); } diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index b22d13b0c71d..5dc9e8c63fcd 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -129,7 +129,9 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) continue; if (!r->start || pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx); + dev_info(&dev->dev, + "can't reserve window %pR\n", + r); /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -144,16 +146,29 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) } } +struct pci_check_idx_range { + int start; + int end; +}; + static void __init pcibios_allocate_resources(int pass) { struct pci_dev *dev = NULL; - int idx, disabled; + int idx, disabled, i; u16 command; struct resource *r; + struct pci_check_idx_range idx_range[] = { + { PCI_STD_RESOURCES, PCI_STD_RESOURCE_END }, +#ifdef CONFIG_PCI_IOV + { PCI_IOV_RESOURCES, PCI_IOV_RESOURCE_END }, +#endif + }; + for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); - for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) { + for (i = 0; i < ARRAY_SIZE(idx_range); i++) + for (idx = idx_range[i].start; idx <= idx_range[i].end; idx++) { r = &dev->resource[idx]; if (r->parent) /* Already allocated */ continue; @@ -164,12 +179,12 @@ static void __init pcibios_allocate_resources(int pass) else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) { - dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n", - (unsigned long long) r->start, - (unsigned long long) r->end, - r->flags, disabled, pass); + dev_dbg(&dev->dev, + "BAR %d: reserving %pr (d=%d, p=%d)\n", + idx, r, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx); + dev_info(&dev->dev, + "can't reserve %pR\n", r); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; @@ -182,7 +197,7 @@ static void __init pcibios_allocate_resources(int pass) /* Turn the ROM off, leave the resource region, * but keep it unregistered. */ u32 reg; - dev_dbg(&dev->dev, "disabling ROM\n"); + dev_dbg(&dev->dev, "disabling ROM %pR\n", r); r->flags &= ~IORESOURCE_ROM_ENABLE; pci_read_config_dword(dev, dev->rom_base_reg, ®); @@ -282,6 +297,15 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return -EINVAL; prot = pgprot_val(vma->vm_page_prot); + + /* + * Return error if pat is not enabled and write_combine is requested. + * Caller can followup with UC MINUS request and add a WC mtrr if there + * is a free mtrr slot. + */ + if (!pat_enabled && write_combine) + return -EINVAL; + if (pat_enabled && write_combine) prot |= _PAGE_CACHE_WC; else if (pat_enabled || boot_cpu_data.x86 > 3) diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c new file mode 100644 index 000000000000..b7a55dc55d13 --- /dev/null +++ b/arch/x86/pci/intel_bus.c @@ -0,0 +1,90 @@ +/* + * to read io range from IOH pci conf, need to do it after mmconfig is there + */ + +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <asm/pci_x86.h> + +#include "bus_numa.h" + +static inline void print_ioh_resources(struct pci_root_info *info) +{ + int res_num; + int busnum; + int i; + + printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n", + info->bus_min, info->bus_max); + res_num = info->res_num; + busnum = info->bus_min; + for (i = 0; i < res_num; i++) { + struct resource *res; + + res = &info->res[i]; + printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n", + busnum, i, + (res->flags & IORESOURCE_IO) ? "io port" : + "mmio", + res->start, res->end); + } +} + +#define IOH_LIO 0x108 +#define IOH_LMMIOL 0x10c +#define IOH_LMMIOH 0x110 +#define IOH_LMMIOH_BASEU 0x114 +#define IOH_LMMIOH_LIMITU 0x118 +#define IOH_LCFGBUS 0x11c + +static void __devinit pci_root_bus_res(struct pci_dev *dev) +{ + u16 word; + u32 dword; + struct pci_root_info *info; + u16 io_base, io_end; + u32 mmiol_base, mmiol_end; + u64 mmioh_base, mmioh_end; + int bus_base, bus_end; + + if (pci_root_num >= PCI_ROOT_NR) { + printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n"); + return; + } + + info = &pci_root_info[pci_root_num]; + pci_root_num++; + + pci_read_config_word(dev, IOH_LCFGBUS, &word); + bus_base = (word & 0xff); + bus_end = (word & 0xff00) >> 8; + sprintf(info->name, "PCI Bus #%02x", bus_base); + info->bus_min = bus_base; + info->bus_max = bus_end; + + pci_read_config_word(dev, IOH_LIO, &word); + io_base = (word & 0xf0) << (12 - 4); + io_end = (word & 0xf000) | 0xfff; + update_res(info, io_base, io_end, IORESOURCE_IO, 0); + + pci_read_config_dword(dev, IOH_LMMIOL, &dword); + mmiol_base = (dword & 0xff00) << (24 - 8); + mmiol_end = (dword & 0xff000000) | 0xffffff; + update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0); + + pci_read_config_dword(dev, IOH_LMMIOH, &dword); + mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10); + mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff); + pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword); + mmioh_base |= ((u64)(dword & 0x7ffff)) << 32; + pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword); + mmioh_end |= ((u64)(dword & 0x7ffff)) << 32; + update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0); + + print_ioh_resources(info); +} + +/* intel IOH */ +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res); diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 602c172d3bd5..b19d1e54201e 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -15,48 +15,98 @@ #include <linux/acpi.h> #include <linux/sfi_acpi.h> #include <linux/bitmap.h> -#include <linux/sort.h> +#include <linux/dmi.h> #include <asm/e820.h> #include <asm/pci_x86.h> #include <asm/acpi.h> #define PREFIX "PCI: " -/* aperture is up to 256MB but BIOS may reserve less */ -#define MMCONFIG_APER_MIN (2 * 1024*1024) -#define MMCONFIG_APER_MAX (256 * 1024*1024) - /* Indicate if the mmcfg resources have been placed into the resource table. */ static int __initdata pci_mmcfg_resources_inserted; -static __init int extend_mmcfg(int num) +LIST_HEAD(pci_mmcfg_list); + +static __init void pci_mmconfig_remove(struct pci_mmcfg_region *cfg) { - struct acpi_mcfg_allocation *new; - int new_num = pci_mmcfg_config_num + num; + if (cfg->res.parent) + release_resource(&cfg->res); + list_del(&cfg->list); + kfree(cfg); +} - new = kzalloc(sizeof(pci_mmcfg_config[0]) * new_num, GFP_KERNEL); - if (!new) - return -1; +static __init void free_all_mmcfg(void) +{ + struct pci_mmcfg_region *cfg, *tmp; - if (pci_mmcfg_config) { - memcpy(new, pci_mmcfg_config, - sizeof(pci_mmcfg_config[0]) * new_num); - kfree(pci_mmcfg_config); + pci_mmcfg_arch_free(); + list_for_each_entry_safe(cfg, tmp, &pci_mmcfg_list, list) + pci_mmconfig_remove(cfg); +} + +static __init void list_add_sorted(struct pci_mmcfg_region *new) +{ + struct pci_mmcfg_region *cfg; + + /* keep list sorted by segment and starting bus number */ + list_for_each_entry(cfg, &pci_mmcfg_list, list) { + if (cfg->segment > new->segment || + (cfg->segment == new->segment && + cfg->start_bus >= new->start_bus)) { + list_add_tail(&new->list, &cfg->list); + return; + } } - pci_mmcfg_config = new; + list_add_tail(&new->list, &pci_mmcfg_list); +} - return 0; +static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start, + int end, u64 addr) +{ + struct pci_mmcfg_region *new; + int num_buses; + struct resource *res; + + if (addr == 0) + return NULL; + + new = kzalloc(sizeof(*new), GFP_KERNEL); + if (!new) + return NULL; + + new->address = addr; + new->segment = segment; + new->start_bus = start; + new->end_bus = end; + + list_add_sorted(new); + + num_buses = end - start + 1; + res = &new->res; + res->start = addr + PCI_MMCFG_BUS_OFFSET(start); + res->end = addr + PCI_MMCFG_BUS_OFFSET(num_buses) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + snprintf(new->name, PCI_MMCFG_RESOURCE_NAME_LEN, + "PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end); + res->name = new->name; + + printk(KERN_INFO PREFIX "MMCONFIG for domain %04x [bus %02x-%02x] at " + "%pR (base %#lx)\n", segment, start, end, &new->res, + (unsigned long) addr); + + return new; } -static __init void fill_one_mmcfg(u64 addr, int segment, int start, int end) +struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus) { - int i = pci_mmcfg_config_num; + struct pci_mmcfg_region *cfg; - pci_mmcfg_config_num++; - pci_mmcfg_config[i].address = addr; - pci_mmcfg_config[i].pci_segment = segment; - pci_mmcfg_config[i].start_bus_number = start; - pci_mmcfg_config[i].end_bus_number = end; + list_for_each_entry(cfg, &pci_mmcfg_list, list) + if (cfg->segment == segment && + cfg->start_bus <= bus && bus <= cfg->end_bus) + return cfg; + + return NULL; } static const char __init *pci_mmcfg_e7520(void) @@ -68,11 +118,9 @@ static const char __init *pci_mmcfg_e7520(void) if (win == 0x0000 || win == 0xf000) return NULL; - if (extend_mmcfg(1) == -1) + if (pci_mmconfig_add(0, 0, 255, win << 16) == NULL) return NULL; - fill_one_mmcfg(win << 16, 0, 0, 255); - return "Intel Corporation E7520 Memory Controller Hub"; } @@ -114,11 +162,9 @@ static const char __init *pci_mmcfg_intel_945(void) if ((pciexbar & mask) >= 0xf0000000U) return NULL; - if (extend_mmcfg(1) == -1) + if (pci_mmconfig_add(0, 0, (len >> 20) - 1, pciexbar & mask) == NULL) return NULL; - fill_one_mmcfg(pciexbar & mask, 0, 0, (len >> 20) - 1); - return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; } @@ -127,7 +173,7 @@ static const char __init *pci_mmcfg_amd_fam10h(void) u32 low, high, address; u64 base, msr; int i; - unsigned segnbits = 0, busnbits; + unsigned segnbits = 0, busnbits, end_bus; if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF)) return NULL; @@ -161,11 +207,13 @@ static const char __init *pci_mmcfg_amd_fam10h(void) busnbits = 8; } - if (extend_mmcfg(1 << segnbits) == -1) - return NULL; - + end_bus = (1 << busnbits) - 1; for (i = 0; i < (1 << segnbits); i++) - fill_one_mmcfg(base + (1<<28) * i, i, 0, (1 << busnbits) - 1); + if (pci_mmconfig_add(i, 0, end_bus, + base + (1<<28) * i) == NULL) { + free_all_mmcfg(); + return NULL; + } return "AMD Family 10h NB"; } @@ -190,7 +238,7 @@ static const char __init *pci_mmcfg_nvidia_mcp55(void) /* * do check if amd fam10h already took over */ - if (!acpi_disabled || pci_mmcfg_config_num || mcp55_checked) + if (!acpi_disabled || !list_empty(&pci_mmcfg_list) || mcp55_checked) return NULL; mcp55_checked = true; @@ -213,16 +261,14 @@ static const char __init *pci_mmcfg_nvidia_mcp55(void) if (!(extcfg & extcfg_enable_mask)) continue; - if (extend_mmcfg(1) == -1) - continue; - size_index = (extcfg & extcfg_size_mask) >> extcfg_size_shift; base = extcfg & extcfg_base_mask[size_index]; /* base could > 4G */ base <<= extcfg_base_lshift; start = (extcfg & extcfg_start_mask) >> extcfg_start_shift; end = start + extcfg_sizebus[size_index] - 1; - fill_one_mmcfg(base, 0, start, end); + if (pci_mmconfig_add(0, start, end, base) == NULL) + continue; mcp55_mmconf_found++; } @@ -253,45 +299,27 @@ static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { 0x0369, pci_mmcfg_nvidia_mcp55 }, }; -static int __init cmp_mmcfg(const void *x1, const void *x2) -{ - const typeof(pci_mmcfg_config[0]) *m1 = x1; - const typeof(pci_mmcfg_config[0]) *m2 = x2; - int start1, start2; - - start1 = m1->start_bus_number; - start2 = m2->start_bus_number; - - return start1 - start2; -} - static void __init pci_mmcfg_check_end_bus_number(void) { - int i; - typeof(pci_mmcfg_config[0]) *cfg, *cfgx; - - /* sort them at first */ - sort(pci_mmcfg_config, pci_mmcfg_config_num, - sizeof(pci_mmcfg_config[0]), cmp_mmcfg, NULL); + struct pci_mmcfg_region *cfg, *cfgx; /* last one*/ - if (pci_mmcfg_config_num > 0) { - i = pci_mmcfg_config_num - 1; - cfg = &pci_mmcfg_config[i]; - if (cfg->end_bus_number < cfg->start_bus_number) - cfg->end_bus_number = 255; - } + cfg = list_entry(pci_mmcfg_list.prev, typeof(*cfg), list); + if (cfg) + if (cfg->end_bus < cfg->start_bus) + cfg->end_bus = 255; - /* don't overlap please */ - for (i = 0; i < pci_mmcfg_config_num - 1; i++) { - cfg = &pci_mmcfg_config[i]; - cfgx = &pci_mmcfg_config[i+1]; + if (list_is_singular(&pci_mmcfg_list)) + return; - if (cfg->end_bus_number < cfg->start_bus_number) - cfg->end_bus_number = 255; + /* don't overlap please */ + list_for_each_entry(cfg, &pci_mmcfg_list, list) { + if (cfg->end_bus < cfg->start_bus) + cfg->end_bus = 255; - if (cfg->end_bus_number >= cfgx->start_bus_number) - cfg->end_bus_number = cfgx->start_bus_number - 1; + cfgx = list_entry(cfg->list.next, typeof(*cfg), list); + if (cfg != cfgx && cfg->end_bus >= cfgx->start_bus) + cfg->end_bus = cfgx->start_bus - 1; } } @@ -306,8 +334,7 @@ static int __init pci_mmcfg_check_hostbridge(void) if (!raw_pci_ops) return 0; - pci_mmcfg_config_num = 0; - pci_mmcfg_config = NULL; + free_all_mmcfg(); for (i = 0; i < ARRAY_SIZE(pci_mmcfg_probes); i++) { bus = pci_mmcfg_probes[i].bus; @@ -322,45 +349,22 @@ static int __init pci_mmcfg_check_hostbridge(void) name = pci_mmcfg_probes[i].probe(); if (name) - printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n", + printk(KERN_INFO PREFIX "%s with MMCONFIG support\n", name); } /* some end_bus_number is crazy, fix it */ pci_mmcfg_check_end_bus_number(); - return pci_mmcfg_config_num != 0; + return !list_empty(&pci_mmcfg_list); } static void __init pci_mmcfg_insert_resources(void) { -#define PCI_MMCFG_RESOURCE_NAME_LEN 24 - int i; - struct resource *res; - char *names; - unsigned num_buses; - - res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), - pci_mmcfg_config_num, GFP_KERNEL); - if (!res) { - printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); - return; - } + struct pci_mmcfg_region *cfg; - names = (void *)&res[pci_mmcfg_config_num]; - for (i = 0; i < pci_mmcfg_config_num; i++, res++) { - struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i]; - num_buses = cfg->end_bus_number - cfg->start_bus_number + 1; - res->name = names; - snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, - "PCI MMCONFIG %u [%02x-%02x]", cfg->pci_segment, - cfg->start_bus_number, cfg->end_bus_number); - res->start = cfg->address + (cfg->start_bus_number << 20); - res->end = res->start + (num_buses << 20) - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - insert_resource(&iomem_resource, res); - names += PCI_MMCFG_RESOURCE_NAME_LEN; - } + list_for_each_entry(cfg, &pci_mmcfg_list, list) + insert_resource(&iomem_resource, &cfg->res); /* Mark that the resources have been inserted. */ pci_mmcfg_resources_inserted = 1; @@ -437,11 +441,12 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used) typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type); static int __init is_mmconf_reserved(check_reserved_t is_reserved, - u64 addr, u64 size, int i, - typeof(pci_mmcfg_config[0]) *cfg, int with_e820) + struct pci_mmcfg_region *cfg, int with_e820) { + u64 addr = cfg->res.start; + u64 size = resource_size(&cfg->res); u64 old_size = size; - int valid = 0; + int valid = 0, num_buses; while (!is_reserved(addr, addr + size, E820_RESERVED)) { size >>= 1; @@ -450,19 +455,25 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved, } if (size >= (16UL<<20) || size == old_size) { - printk(KERN_NOTICE - "PCI: MCFG area at %Lx reserved in %s\n", - addr, with_e820?"E820":"ACPI motherboard resources"); + printk(KERN_INFO PREFIX "MMCONFIG at %pR reserved in %s\n", + &cfg->res, + with_e820 ? "E820" : "ACPI motherboard resources"); valid = 1; if (old_size != size) { - /* update end_bus_number */ - cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1); - printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx " - "segment %hu buses %u - %u\n", - i, (unsigned long)cfg->address, cfg->pci_segment, - (unsigned int)cfg->start_bus_number, - (unsigned int)cfg->end_bus_number); + /* update end_bus */ + cfg->end_bus = cfg->start_bus + ((size>>20) - 1); + num_buses = cfg->end_bus - cfg->start_bus + 1; + cfg->res.end = cfg->res.start + + PCI_MMCFG_BUS_OFFSET(num_buses) - 1; + snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN, + "PCI MMCONFIG %04x [bus %02x-%02x]", + cfg->segment, cfg->start_bus, cfg->end_bus); + printk(KERN_INFO PREFIX + "MMCONFIG for %04x [bus%02x-%02x] " + "at %pR (base %#lx) (size reduced!)\n", + cfg->segment, cfg->start_bus, cfg->end_bus, + &cfg->res, (unsigned long) cfg->address); } } @@ -471,45 +482,26 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved, static void __init pci_mmcfg_reject_broken(int early) { - typeof(pci_mmcfg_config[0]) *cfg; - int i; + struct pci_mmcfg_region *cfg; - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - for (i = 0; i < pci_mmcfg_config_num; i++) { + list_for_each_entry(cfg, &pci_mmcfg_list, list) { int valid = 0; - u64 addr, size; - - cfg = &pci_mmcfg_config[i]; - addr = cfg->start_bus_number; - addr <<= 20; - addr += cfg->address; - size = cfg->end_bus_number + 1 - cfg->start_bus_number; - size <<= 20; - printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx " - "segment %hu buses %u - %u\n", - i, (unsigned long)cfg->address, cfg->pci_segment, - (unsigned int)cfg->start_bus_number, - (unsigned int)cfg->end_bus_number); if (!early && !acpi_disabled) - valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0); + valid = is_mmconf_reserved(is_acpi_reserved, cfg, 0); if (valid) continue; if (!early) - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" - " reserved in ACPI motherboard resources\n", - cfg->address); + printk(KERN_ERR FW_BUG PREFIX + "MMCONFIG at %pR not reserved in " + "ACPI motherboard resources\n", &cfg->res); /* Don't try to do this check unless configuration type 1 is available. how about type 2 ?*/ if (raw_pci_ops) - valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1); + valid = is_mmconf_reserved(e820_all_mapped, cfg, 1); if (!valid) goto reject; @@ -518,34 +510,41 @@ static void __init pci_mmcfg_reject_broken(int early) return; reject: - printk(KERN_INFO "PCI: Not using MMCONFIG.\n"); - pci_mmcfg_arch_free(); - kfree(pci_mmcfg_config); - pci_mmcfg_config = NULL; - pci_mmcfg_config_num = 0; + printk(KERN_INFO PREFIX "not using MMCONFIG\n"); + free_all_mmcfg(); } static int __initdata known_bridge; -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; +static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg, + struct acpi_mcfg_allocation *cfg) +{ + int year; -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_mcfg_allocation *pci_mmcfg_config; -int pci_mmcfg_config_num; + if (cfg->address < 0xFFFFFFFF) + return 0; -static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) -{ if (!strcmp(mcfg->header.oem_id, "SGI")) - acpi_mcfg_64bit_base_addr = TRUE; + return 0; - return 0; + if (mcfg->header.revision >= 1) { + if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && + year >= 2010) + return 0; + } + + printk(KERN_ERR PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx " + "is above 4GB, ignored\n", cfg->pci_segment, + cfg->start_bus_number, cfg->end_bus_number, cfg->address); + return -EINVAL; } static int __init pci_parse_mcfg(struct acpi_table_header *header) { struct acpi_table_mcfg *mcfg; + struct acpi_mcfg_allocation *cfg_table, *cfg; unsigned long i; - int config_size; + int entries; if (!header) return -EINVAL; @@ -553,38 +552,33 @@ static int __init pci_parse_mcfg(struct acpi_table_header *header) mcfg = (struct acpi_table_mcfg *)header; /* how many config structures do we have */ - pci_mmcfg_config_num = 0; + free_all_mmcfg(); + entries = 0; i = header->length - sizeof(struct acpi_table_mcfg); while (i >= sizeof(struct acpi_mcfg_allocation)) { - ++pci_mmcfg_config_num; + entries++; i -= sizeof(struct acpi_mcfg_allocation); }; - if (pci_mmcfg_config_num == 0) { + if (entries == 0) { printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); return -ENODEV; } - config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); - pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); - if (!pci_mmcfg_config) { - printk(KERN_WARNING PREFIX - "No memory for MCFG config tables\n"); - return -ENOMEM; - } - - memcpy(pci_mmcfg_config, &mcfg[1], config_size); - - acpi_mcfg_oem_check(mcfg); - - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && - !acpi_mcfg_64bit_base_addr) { - printk(KERN_ERR PREFIX - "MMCONFIG not in low 4GB of memory\n"); - kfree(pci_mmcfg_config); - pci_mmcfg_config_num = 0; + cfg_table = (struct acpi_mcfg_allocation *) &mcfg[1]; + for (i = 0; i < entries; i++) { + cfg = &cfg_table[i]; + if (acpi_mcfg_check_entry(mcfg, cfg)) { + free_all_mmcfg(); return -ENODEV; } + + if (pci_mmconfig_add(cfg->pci_segment, cfg->start_bus_number, + cfg->end_bus_number, cfg->address) == NULL) { + printk(KERN_WARNING PREFIX + "no memory for MCFG entries\n"); + free_all_mmcfg(); + return -ENOMEM; + } } return 0; @@ -614,9 +608,7 @@ static void __init __pci_mmcfg_init(int early) pci_mmcfg_reject_broken(early); - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) + if (list_empty(&pci_mmcfg_list)) return; if (pci_mmcfg_arch_init()) @@ -648,9 +640,7 @@ static int __init pci_mmcfg_late_insert_resources(void) */ if ((pci_mmcfg_resources_inserted == 1) || (pci_probe & PCI_PROBE_MMCONF) == 0 || - (pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) + list_empty(&pci_mmcfg_list)) return 1; /* diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c index f10a7e94a84c..90d5fd476ed4 100644 --- a/arch/x86/pci/mmconfig_32.c +++ b/arch/x86/pci/mmconfig_32.c @@ -27,18 +27,10 @@ static int mmcfg_last_accessed_cpu; */ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) { - struct acpi_mcfg_allocation *cfg; - int cfg_num; - - for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { - cfg = &pci_mmcfg_config[cfg_num]; - if (cfg->pci_segment == seg && - (cfg->start_bus_number <= bus) && - (cfg->end_bus_number >= bus)) - return cfg->address; - } + struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus); - /* Fall back to type 0 */ + if (cfg) + return cfg->address; return 0; } @@ -47,7 +39,7 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) */ static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn) { - u32 dev_base = base | (bus << 20) | (devfn << 12); + u32 dev_base = base | PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12); int cpu = smp_processor_id(); if (dev_base != mmcfg_last_accessed_device || cpu != mmcfg_last_accessed_cpu) { diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c index 94349f8b2f96..e783841bd1d7 100644 --- a/arch/x86/pci/mmconfig_64.c +++ b/arch/x86/pci/mmconfig_64.c @@ -12,38 +12,15 @@ #include <asm/e820.h> #include <asm/pci_x86.h> -/* Static virtual mapping of the MMCONFIG aperture */ -struct mmcfg_virt { - struct acpi_mcfg_allocation *cfg; - char __iomem *virt; -}; -static struct mmcfg_virt *pci_mmcfg_virt; - -static char __iomem *get_virt(unsigned int seg, unsigned bus) -{ - struct acpi_mcfg_allocation *cfg; - int cfg_num; - - for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { - cfg = pci_mmcfg_virt[cfg_num].cfg; - if (cfg->pci_segment == seg && - (cfg->start_bus_number <= bus) && - (cfg->end_bus_number >= bus)) - return pci_mmcfg_virt[cfg_num].virt; - } - - /* Fall back to type 0 */ - return NULL; -} +#define PREFIX "PCI: " static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) { - char __iomem *addr; + struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus); - addr = get_virt(seg, bus); - if (!addr) - return NULL; - return addr + ((bus << 20) | (devfn << 12)); + if (cfg && cfg->virt) + return cfg->virt + (PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12)); + return NULL; } static int pci_mmcfg_read(unsigned int seg, unsigned int bus, @@ -109,42 +86,30 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) +static void __iomem * __init mcfg_ioremap(struct pci_mmcfg_region *cfg) { void __iomem *addr; u64 start, size; + int num_buses; - start = cfg->start_bus_number; - start <<= 20; - start += cfg->address; - size = cfg->end_bus_number + 1 - cfg->start_bus_number; - size <<= 20; + start = cfg->address + PCI_MMCFG_BUS_OFFSET(cfg->start_bus); + num_buses = cfg->end_bus - cfg->start_bus + 1; + size = PCI_MMCFG_BUS_OFFSET(num_buses); addr = ioremap_nocache(start, size); - if (addr) { - printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n", - start, start + size - 1); - addr -= cfg->start_bus_number << 20; - } + if (addr) + addr -= PCI_MMCFG_BUS_OFFSET(cfg->start_bus); return addr; } int __init pci_mmcfg_arch_init(void) { - int i; - pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) * - pci_mmcfg_config_num, GFP_KERNEL); - if (pci_mmcfg_virt == NULL) { - printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); - return 0; - } + struct pci_mmcfg_region *cfg; - for (i = 0; i < pci_mmcfg_config_num; ++i) { - pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; - pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]); - if (!pci_mmcfg_virt[i].virt) { - printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " - "segment %d\n", - pci_mmcfg_config[i].pci_segment); + list_for_each_entry(cfg, &pci_mmcfg_list, list) { + cfg->virt = mcfg_ioremap(cfg); + if (!cfg->virt) { + printk(KERN_ERR PREFIX "can't map MMCONFIG at %pR\n", + &cfg->res); pci_mmcfg_arch_free(); return 0; } @@ -155,19 +120,12 @@ int __init pci_mmcfg_arch_init(void) void __init pci_mmcfg_arch_free(void) { - int i; - - if (pci_mmcfg_virt == NULL) - return; + struct pci_mmcfg_region *cfg; - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if (pci_mmcfg_virt[i].virt) { - iounmap(pci_mmcfg_virt[i].virt + (pci_mmcfg_virt[i].cfg->start_bus_number << 20)); - pci_mmcfg_virt[i].virt = NULL; - pci_mmcfg_virt[i].cfg = NULL; + list_for_each_entry(cfg, &pci_mmcfg_list, list) { + if (cfg->virt) { + iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus)); + cfg->virt = NULL; } } - - kfree(pci_mmcfg_virt); - pci_mmcfg_virt = NULL; } diff --git a/arch/x86/tools/test_get_len.c b/arch/x86/tools/test_get_len.c index d8214dc03fa7..bee8d6ac2691 100644 --- a/arch/x86/tools/test_get_len.c +++ b/arch/x86/tools/test_get_len.c @@ -113,7 +113,7 @@ int main(int argc, char **argv) char line[BUFSIZE], sym[BUFSIZE] = "<unknown>"; unsigned char insn_buf[16]; struct insn insn; - int insns = 0, c; + int insns = 0; int warnings = 0; parse_args(argc, argv); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c462cea8ef09..2b26dd5930c6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -27,7 +27,9 @@ #include <linux/page-flags.h> #include <linux/highmem.h> #include <linux/console.h> +#include <linux/pci.h> +#include <xen/xen.h> #include <xen/interface/xen.h> #include <xen/interface/version.h> #include <xen/interface/physdev.h> @@ -138,24 +140,23 @@ static void xen_vcpu_setup(int cpu) */ void xen_vcpu_restore(void) { - if (have_vcpu_info_placement) { - int cpu; + int cpu; - for_each_online_cpu(cpu) { - bool other_cpu = (cpu != smp_processor_id()); + for_each_online_cpu(cpu) { + bool other_cpu = (cpu != smp_processor_id()); - if (other_cpu && - HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) - BUG(); + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) + BUG(); - xen_vcpu_setup(cpu); + xen_setup_runstate_info(cpu); - if (other_cpu && - HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) - BUG(); - } + if (have_vcpu_info_placement) + xen_vcpu_setup(cpu); - BUG_ON(!have_vcpu_info_placement); + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) + BUG(); } } @@ -1176,10 +1177,16 @@ asmlinkage void __init xen_start_kernel(void) add_preferred_console("xenboot", 0, NULL); add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); + } else { + /* Make sure ACS will be enabled */ + pci_request_acs(); } + xen_raw_console_write("about to get started...\n"); + xen_setup_runstate_info(0); + /* Start the world */ #ifdef CONFIG_X86_32 i386_start_kernel(); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 3bf7b1d250ce..bf4cd6bfe959 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -185,7 +185,7 @@ static inline unsigned p2m_index(unsigned long pfn) } /* Build the parallel p2m_top_mfn structures */ -static void __init xen_build_mfn_list_list(void) +void xen_build_mfn_list_list(void) { unsigned pfn, idx; diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 738da0cb0d8b..64757c0ba5fc 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -295,6 +295,7 @@ static int __cpuinit xen_cpu_up(unsigned int cpu) (unsigned long)task_stack_page(idle) - KERNEL_STACK_OFFSET + THREAD_SIZE; #endif + xen_setup_runstate_info(cpu); xen_setup_timer(cpu); xen_init_lock_cpu(cpu); diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 95be7b434724..987267f79bf5 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -1,4 +1,5 @@ #include <linux/types.h> +#include <linux/clockchips.h> #include <xen/interface/xen.h> #include <xen/grant_table.h> @@ -27,6 +28,8 @@ void xen_pre_suspend(void) void xen_post_suspend(int suspend_cancelled) { + xen_build_mfn_list_list(); + xen_setup_shared_info(); if (suspend_cancelled) { @@ -44,7 +47,19 @@ void xen_post_suspend(int suspend_cancelled) } +static void xen_vcpu_notify_restore(void *data) +{ + unsigned long reason = (unsigned long)data; + + /* Boot processor notified via generic timekeeping_resume() */ + if ( smp_processor_id() == 0) + return; + + clockevents_notify(reason, NULL); +} + void xen_arch_resume(void) { - /* nothing */ + smp_call_function(xen_vcpu_notify_restore, + (void *)CLOCK_EVT_NOTIFY_RESUME, 1); } diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 0a5aa44299a5..9d1f853120d8 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -100,7 +100,7 @@ bool xen_vcpu_stolen(int vcpu) return per_cpu(runstate, vcpu).state == RUNSTATE_runnable; } -static void setup_runstate_info(int cpu) +void xen_setup_runstate_info(int cpu) { struct vcpu_register_runstate_memory_area area; @@ -434,7 +434,7 @@ void xen_setup_timer(int cpu) name = "<timer kasprintf failed>"; irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt, - IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING, + IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER, name, NULL); evt = &per_cpu(xen_clock_events, cpu); @@ -442,8 +442,6 @@ void xen_setup_timer(int cpu) evt->cpumask = cpumask_of(cpu); evt->irq = irq; - - setup_runstate_info(cpu); } void xen_teardown_timer(int cpu) @@ -494,6 +492,7 @@ __init void xen_time_init(void) setup_force_cpu_cap(X86_FEATURE_TSC); + xen_setup_runstate_info(cpu); xen_setup_timer(cpu); xen_setup_cpu_clockevents(); } diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S index 02f496a8dbaa..53adefda4275 100644 --- a/arch/x86/xen/xen-asm_64.S +++ b/arch/x86/xen/xen-asm_64.S @@ -96,7 +96,7 @@ ENTRY(xen_sysret32) pushq $__USER32_CS pushq %rcx - pushq $VGCF_in_syscall + pushq $0 1: jmp hypercall_iret ENDPATCH(xen_sysret32) RELOC(xen_sysret32, 1b+1) @@ -151,7 +151,7 @@ ENTRY(xen_syscall32_target) ENTRY(xen_sysenter_target) lea 16(%rsp), %rsp /* strip %rcx, %r11 */ mov $-ENOSYS, %rax - pushq $VGCF_in_syscall + pushq $0 jmp hypercall_iret ENDPROC(xen_syscall32_target) ENDPROC(xen_sysenter_target) diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 355fa6b99c9c..f9153a300bce 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -25,6 +25,7 @@ extern struct shared_info *HYPERVISOR_shared_info; void xen_setup_mfn_list_list(void); void xen_setup_shared_info(void); +void xen_build_mfn_list_list(void); void xen_setup_machphys_mapping(void); pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn); void xen_ident_map_ISA(void); @@ -41,6 +42,7 @@ void __init xen_build_dynamic_phys_to_machine(void); void xen_init_irq_ops(void); void xen_setup_timer(int cpu); +void xen_setup_runstate_info(int cpu); void xen_teardown_timer(int cpu); cycle_t xen_clocksource_read(void); void xen_setup_cpu_clockevents(void); diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h index 05cebf8f62b1..4352dbe1186a 100644 --- a/arch/xtensa/include/asm/syscall.h +++ b/arch/xtensa/include/asm/syscall.h @@ -13,8 +13,6 @@ struct sigaction; asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*); asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*); asmlinkage long xtensa_pipe(int __user *); -asmlinkage long xtensa_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, unsigned long); asmlinkage long xtensa_ptrace(long, long, long, long); asmlinkage long xtensa_sigreturn(struct pt_regs*); asmlinkage long xtensa_rt_sigreturn(struct pt_regs*); diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index 4e55dc763021..fbf318b3af3e 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -189,7 +189,7 @@ __SYSCALL( 79, sys_fremovexattr, 2) /* File Map / Shared Memory Operations */ #define __NR_mmap2 80 -__SYSCALL( 80, xtensa_mmap2, 6) +__SYSCALL( 80, sys_mmap_pgoff, 6) #define __NR_munmap 81 __SYSCALL( 81, sys_munmap, 2) #define __NR_mprotect 82 diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index ac15ecbdf919..1e67bab775c1 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -57,31 +57,6 @@ asmlinkage long xtensa_pipe(int __user *userfds) return error; } - -asmlinkage long xtensa_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) { unsigned long ret; diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 4c559cf7da2d..e60a1f57022f 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -196,7 +196,7 @@ static const struct file_operations rs_proc_fops = { .release = single_release, }; -static struct tty_operations serial_ops = { +static const struct tty_operations serial_ops = { .open = rs_open, .close = rs_close, .write = rs_write, |
