2 files changed, 61 insertions, 3 deletions

diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h
index 2d3f14e3be29..32661945d4c3 100644
--- a/arch/arm/mach-pxa/include/mach/palmtreo.h
+++ b/arch/arm/mach-pxa/include/mach/palmtreo.h
@@ -44,6 +44,9 @@
 #define GPIO_NR_TREO680_VIBRATE_EN	44
 #define GPIO_NR_TREO680_KEYB_BL		24
 #define GPIO_NR_TREO680_BT_EN		43
+#define GPIO_NR_TREO680_LCD_POWER	77
+#define GPIO_NR_TREO680_LCD_EN		86
+#define GPIO_NR_TREO680_LCD_EN_N	25
 #endif /* CONFIG_MACH_TREO680 */
 
 /* Centro685 specific GPIOs */
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 3f3c48f2f7ce..44412162fd27 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -98,9 +98,6 @@ static unsigned long treo_pin_config[] __initdata = {
 	GPIO96_KP_MKOUT_6,
 	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
 
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
 	/* Quick Capture Interface */
 	GPIO84_CIF_FV,
 	GPIO85_CIF_LV,
@@ -140,6 +137,12 @@ static unsigned long treo680_pin_config[] __initdata = {
 	/* MATRIX KEYPAD - different wake up source */
 	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
 	GPIO99_KP_MKIN_5,
+
+	/* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */
+	GPIOxx_LCD_16BPP,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
 };
 #endif /* CONFIG_MACH_TREO680 */
 
@@ -155,6 +158,9 @@ static unsigned long centro685_pin_config[] __initdata = {
 	/* MATRIX KEYPAD - different wake up source */
 	GPIO100_KP_MKIN_0,
 	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
 };
 #endif /* CONFIG_MACH_CENTRO */
 
@@ -424,10 +430,59 @@ static void __init palmphone_common_init(void)
 }
 
 #ifdef CONFIG_MACH_TREO680
+void __init treo680_gpio_init(void)
+{
+	unsigned int gpio;
+
+	/* drive all three lcd gpios high initially */
+	const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT;
+
+	/*
+	 * LCD GPIO initialization...
+	 */
+
+	/*
+	 * This is likely the power to the lcd.  Toggling it low/high appears to
+	 * turn the lcd off/on.  Can be toggled after lcd is initialized without
+	 * any apparent adverse effects to the lcd operation.  Note that this
+	 * gpio line is used by the lcd controller as the L_BIAS signal, but
+	 * treo680 configures it as gpio.
+	 */
+	gpio = GPIO_NR_TREO680_LCD_POWER;
+	if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0)
+		goto fail;
+
+	/*
+	 * These two are called "enables", for lack of a better understanding.
+	 * If either of these are toggled after the lcd is initialized, the
+	 * image becomes degraded.  N.B. The IPL shipped with the treo
+	 * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high.  If
+	 * the IPL is ever reprogrammed, this initialization may be need to be
+	 * revisited.
+	 */
+	gpio = GPIO_NR_TREO680_LCD_EN;
+	if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0)
+		goto fail;
+	gpio = GPIO_NR_TREO680_LCD_EN_N;
+	if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0)
+		goto fail;
+
+	/* driving this low turns LCD on */
+	gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0);
+
+	return;
+ fail:
+	pr_err("gpio %d initialization failed\n", gpio);
+	gpio_free(GPIO_NR_TREO680_LCD_POWER);
+	gpio_free(GPIO_NR_TREO680_LCD_EN);
+	gpio_free(GPIO_NR_TREO680_LCD_EN_N);
+}
+
 static void __init treo680_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
 	palmphone_common_init();
+	treo680_gpio_init();
 	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
 			GPIO_NR_TREO680_SD_POWER, 0);
 }