diff options
Diffstat (limited to 'arch')
1379 files changed, 28091 insertions, 28187 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 8d698fb5ccc9..34884faf98cd 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -300,15 +300,16 @@ config SECCOMP_FILTER See Documentation/prctl/seccomp_filter.txt for details. -config HAVE_RCU_USER_QS +config HAVE_CONTEXT_TRACKING bool help - Provide kernel entry/exit hooks necessary for userspace - RCU extended quiescent state. Syscalls need to be wrapped inside - rcu_user_exit()-rcu_user_enter() through the slow path using - TIF_NOHZ flag. Exceptions handlers must be wrapped as well. Irqs - are already protected inside rcu_irq_enter/rcu_irq_exit() but - preemption or signal handling on irq exit still need to be protected. + Provide kernel/user boundaries probes necessary for subsystems + that need it, such as userspace RCU extended quiescent state. + Syscalls need to be wrapped inside user_exit()-user_enter() through + the slow path using TIF_NOHZ flag. Exceptions handlers must be + wrapped as well. Irqs are already protected inside + rcu_irq_enter/rcu_irq_exit() but preemption or signal handling on + irq exit still need to be protected. config HAVE_VIRT_CPU_ACCOUNTING bool diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild index 64ffc9e9e548..dcfabb9f05a0 100644 --- a/arch/alpha/include/asm/Kbuild +++ b/arch/alpha/include/asm/Kbuild @@ -11,3 +11,4 @@ header-y += reg.h header-y += regdef.h header-y += sysinfo.h generic-y += exec.h +generic-y += trace_clock.h diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h index 80e1cee90f1f..92c557be49fc 100644 --- a/arch/alpha/include/asm/ioctls.h +++ b/arch/alpha/include/asm/ioctls.h @@ -95,6 +95,9 @@ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCVHANGUP 0x5437 +#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ +#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ +#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/alpha/include/asm/mman.h b/arch/alpha/include/asm/mman.h index cbeb3616a28e..0086b472bc2b 100644 --- a/arch/alpha/include/asm/mman.h +++ b/arch/alpha/include/asm/mman.h @@ -63,4 +63,15 @@ /* compatibility flags */ #define MAP_FILE 0 +/* + * When MAP_HUGETLB is set bits [26:31] encode the log2 of the huge page size. + * This gives us 6 bits, which is enough until someone invents 128 bit address + * spaces. + * + * Assume these are all power of twos. + * When 0 use the default page size. + */ +#define MAP_HUGE_SHIFT 26 +#define MAP_HUGE_MASK 0x3f + #endif /* __ALPHA_MMAN_H__ */ diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 5d5865204a1d..59b7bbad8394 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -205,7 +205,6 @@ static const struct tty_operations srmcons_ops = { static int __init srmcons_init(void) { - tty_port_init(&srmcons_singleton.port); setup_timer(&srmcons_singleton.timer, srmcons_receive_chars, (unsigned long)&srmcons_singleton); if (srm_is_registered_console) { @@ -215,6 +214,9 @@ srmcons_init(void) driver = alloc_tty_driver(MAX_SRM_CONSOLE_DEVICES); if (!driver) return -ENOMEM; + + tty_port_init(&srmcons_singleton.port); + driver->driver_name = "srm"; driver->name = "srm"; driver->major = 0; /* dynamic */ @@ -227,6 +229,7 @@ srmcons_init(void) err = tty_register_driver(driver); if (err) { put_tty_driver(driver); + tty_port_destroy(&srmcons_singleton.port); return err; } srmcons_driver = driver; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8918a2dd89b4..08330d9e6a9c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -5,8 +5,9 @@ config ARM select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_WANT_IPC_PARSE_VERSION + select BUILDTIME_EXTABLE_SORT if MMU select CPU_PM if (SUSPEND || CPU_IDLE) - select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN + select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IRQ_PROBE @@ -21,6 +22,7 @@ config ARM select HAVE_AOUT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT select HAVE_C_RECORDMCOUNT @@ -285,8 +287,8 @@ config ARCH_INTEGRATOR select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select PLAT_VERSATILE - select PLAT_VERSATILE_FPGA_IRQ select SPARSE_IRQ + select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. @@ -319,7 +321,7 @@ config ARCH_VERSATILE select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_CLOCK - select PLAT_VERSATILE_FPGA_IRQ + select VERSATILE_FPGA_IRQ help This enables support for ARM Ltd Versatile board. @@ -331,13 +333,15 @@ config ARCH_AT91 select IRQ_DOMAIN select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD + select PINCTRL + select PINCTRL_AT91 if USE_OF help This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. config ARCH_BCM2835 bool "Broadcom BCM2835 family" - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 @@ -345,7 +349,10 @@ config ARCH_BCM2835 select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS + select GENERIC_GPIO select MULTI_IRQ_HANDLER + select PINCTRL + select PINCTRL_BCM2835 select SPARSE_IRQ select USE_OF help @@ -365,11 +372,16 @@ config ARCH_CNS3XXX config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" + select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select AUTO_ZRELADDR select CLKDEV_LOOKUP select COMMON_CLK select CPU_ARM720T + select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H + select SPARSE_IRQ help Support for Cirrus Logic 711x/721x/731x based boards. @@ -434,19 +446,6 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_MXC - bool "Freescale MXC/iMX-based" - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select GENERIC_IRQ_CHIP - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select USE_OF - help - Support for Freescale MXC/iMX-based family of processors - config ARCH_MXS bool "Freescale MXS-based" select ARCH_REQUIRE_GPIOLIB @@ -548,6 +547,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PCI_QUIRKS select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: @@ -587,6 +587,7 @@ config ARCH_MMP select GPIO_PXA select IRQ_DOMAIN select NEED_MACH_GPIO_H + select PINCTRL select PLAT_PXA select SPARSE_IRQ help @@ -905,6 +906,7 @@ config ARCH_NOMADIK config PLAT_SPEAR bool "ST SPEAr" + select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP @@ -925,6 +927,7 @@ config ARCH_DAVINCI select GENERIC_IRQ_CHIP select HAVE_IDE select NEED_MACH_GPIO_H + select USE_OF select ZONE_DMA help Support for TI's DaVinci platform. @@ -938,7 +941,6 @@ config ARCH_OMAP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK - select NEED_MACH_GPIO_H help Support for TI's OMAP platform (OMAP1/2/3/4). @@ -960,7 +962,6 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" select ARM_AMBA select ARM_GIC - select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS select ICST @@ -1023,6 +1024,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/mach-bcm/Kconfig" + source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-cns3xxx/Kconfig" @@ -1059,7 +1062,7 @@ source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" -source "arch/arm/plat-mxc/Kconfig" +source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mxs/Kconfig" @@ -1114,6 +1117,8 @@ source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-shmobile/Kconfig" +source "arch/arm/mach-sunxi/Kconfig" + source "arch/arm/mach-prima2/Kconfig" source "arch/arm/mach-tegra/Kconfig" @@ -1169,7 +1174,7 @@ config ARM_NR_BANKS config IWMMXT bool "Enable iWMMXt support" depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP + default y if PXA27x || PXA3xx || ARCH_MMP help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b0f3857b3a4c..04a3f0d1d053 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -338,6 +338,17 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_S3C_UART3 + depends on PLAT_SAMSUNG && ARCH_EXYNOS + bool "Use S3C UART 3 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 3. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -345,6 +356,20 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_SUNXI_UART0 + bool "Kernel low-level debugging messages via sunXi UART0" + depends on ARCH_SUNXI + help + Say Y here if you want kernel low-level debugging support + on Allwinner A1X based platforms on the UART0. + + config DEBUG_SUNXI_UART1 + bool "Kernel low-level debugging messages via sunXi UART1" + depends on ARCH_SUNXI + help + Say Y here if you want kernel low-level debugging support + on Allwinner A1X based platforms on the UART1. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -412,10 +437,19 @@ endchoice config DEBUG_LL_INCLUDE string default "debug/icedcc.S" if DEBUG_ICEDCC + default "debug/imx.S" if DEBUG_IMX1_UART || \ + DEBUG_IMX25_UART || \ + DEBUG_IMX21_IMX27_UART || \ + DEBUG_IMX31_IMX35_UART || \ + DEBUG_IMX51_UART || \ + DEBUG_IMX50_IMX53_UART ||\ + DEBUG_IMX6Q_UART2 || \ + DEBUG_IMX6Q_UART4 default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/socfpga.S" if DEBUG_SOCFPGA_UART + default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "mach/debug-macro.S" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 5f914fca911b..9c60f474a559 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -32,6 +32,7 @@ KBUILD_DEFCONFIG := versatile_defconfig # defines filename extension depending memory management type. ifeq ($(CONFIG_MMU),) MMUEXT := -nommu +KBUILD_CFLAGS += $(call cc-option,-mno-unaligned-access) endif ifeq ($(CONFIG_FRAME_POINTER),y) @@ -137,6 +138,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 +machine-$(CONFIG_ARCH_BCM) += bcm machine-$(CONFIG_ARCH_BCM2835) += bcm2835 machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx @@ -193,13 +195,12 @@ machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx machine-$(CONFIG_MACH_SPEAR600) += spear6xx machine-$(CONFIG_ARCH_ZYNQ) += zynq +machine-$(CONFIG_ARCH_SUNXI) += sunxi # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. -plat-$(CONFIG_ARCH_MXC) += mxc plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_S3C64XX) += samsung -plat-$(CONFIG_ARCH_ZYNQ) += versatile plat-$(CONFIG_PLAT_IOP) += iop plat-$(CONFIG_PLAT_NOMADIK) += nomadik plat-$(CONFIG_PLAT_ORION) += orion @@ -292,10 +293,10 @@ zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ %.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs # We use MRPROPER_FILES and CLEAN_FILES now archclean: diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9137df539b61..abfce280f57b 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,8 +15,6 @@ ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif -include $(srctree)/arch/arm/boot/dts/Makefile - # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR @@ -59,16 +57,6 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE endif -targets += $(dtb-y) - -# Rule to build device tree blobs -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) - -clean-files := *.dtb - ifneq ($(LOADADDR),) UIMAGE_LOADADDR=$(LOADADDR) else diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index a517153a13ea..5cad8a6dadb0 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -45,19 +45,10 @@ ifeq ($(CONFIG_ARCH_SHARK),y) OBJS += head-shark.o ofw-shark.o endif -ifeq ($(CONFIG_ARCH_P720T),y) -# Borrow this code from SA1100 -OBJS += head-sa1100.o -endif - ifeq ($(CONFIG_ARCH_SA1100),y) OBJS += head-sa1100.o endif -ifeq ($(CONFIG_ARCH_VT8500),y) -OBJS += head-vt8500.o -endif - ifeq ($(CONFIG_CPU_XSCALE),y) OBJS += head-xscale.o endif diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S deleted file mode 100644 index 1dc1e21a3be3..000000000000 --- a/arch/arm/boot/compressed/head-vt8500.S +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/head-vt8500.S - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * VIA VT8500 specific tweaks. This is merged into head.S by the linker. - * - */ - -#include <linux/linkage.h> -#include <asm/mach-types.h> - - .section ".start", "ax" - -__VT8500_start: - @ Compare the SCC ID register against a list of known values - ldr r1, .SCCID - ldr r3, [r1] - - @ VT8500 override - ldr r4, .VT8500SCC - cmp r3, r4 - ldreq r7, .ID_BV07 - beq .Lendvt8500 - - @ WM8505 override - ldr r4, .WM8505SCC - cmp r3, r4 - ldreq r7, .ID_8505 - beq .Lendvt8500 - - @ Otherwise, leave the bootloader's machine id untouched - -.SCCID: - .word 0xd8120000 -.VT8500SCC: - .word 0x34000102 -.WM8505SCC: - .word 0x34260103 - -.ID_BV07: - .word MACH_TYPE_BV07 -.ID_8505: - .word MACH_TYPE_WM8505_7IN_NETBOOK - -.Lendvt8500: diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 90275f036cd1..49ca86e37b8d 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -652,6 +652,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size mov pc, lr ENDPROC(__setup_mmu) +@ Enable unaligned access on v6, to allow better code generation +@ for the decompressor C code: +__armv6_mmu_cache_on: + mrc p15, 0, r0, c1, c0, 0 @ read SCTLR + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + mcr p15, 0, r0, c1, c0, 0 @ write SCTLR + b __armv4_mmu_cache_on + __arm926ejs_mmu_cache_on: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mov r0, #4 @ put dcache in WT mode @@ -694,6 +703,9 @@ __armv7_mmu_cache_on: bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + @ (needed for ARM1176) #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables @@ -914,7 +926,7 @@ proc_types: .word 0x0007b000 @ ARMv6 .word 0x000ff000 - W(b) __armv4_mmu_cache_on + W(b) __armv6_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..f3f2f80cdf3b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,30 +1,49 @@ ifeq ($(CONFIG_OF),y) -dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ - at91sam9263ek.dtb \ - at91sam9g20ek_2mmc.dtb \ - at91sam9g20ek.dtb \ - at91sam9g25ek.dtb \ - at91sam9m10g45ek.dtb \ - at91sam9n12ek.dtb \ - ethernut5.dtb \ - evk-pro3.dtb \ - kizbox.dtb \ - tny_a9260.dtb \ - tny_a9263.dtb \ - tny_a9g20.dtb \ - usb_a9260.dtb \ - usb_a9263.dtb \ - usb_a9g20.dtb +# Keep at91 dtb files sorted alphabetically for each SoC +# rm9200 +dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb +# sam9260 +dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb +dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb +dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb +dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb +# sam9263 +dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb +# sam9g20 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb +dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb +# sam9g45 +dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb +dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb +# sam9n12 +dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb +# sam9x5 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ - exynos5250-smdk5250.dtb -dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb + exynos5250-smdk5250.dtb \ + exynos5440-ssdk5440.dtb +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ + ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb @@ -36,11 +55,20 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ kirkwood-iomega_ix2_200.dtb \ + kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ + kirkwood-mplcec4.dtb \ + kirkwood-ns2.dtb \ + kirkwood-ns2lite.dtb \ + kirkwood-ns2max.dtb \ + kirkwood-ns2mini.dtb \ + kirkwood-nsa310.dtb \ + kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ - kirkwood-ts219-6282.dtb + kirkwood-ts219-6282.dtb \ + kirkwood-openblocks_a6.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -63,27 +91,33 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3-beagle.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ - omap4-pandaES.dtb \ - omap4-var_som.dtb \ + omap4-panda-es.dtb \ + omap4-var-som.dtb \ omap4-sdp.dtb \ omap5-evm.dtb \ am335x-evm.dtb \ + am335x-evmsk.dtb \ am335x-bone.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ - sh73a0-kzm9g.dtb + sh73a0-kzm9g.dtb \ + sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear310-evb.dtb \ spear320-evb.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \ + sun5i-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ @@ -104,4 +138,12 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb +targets += dtbs endif + +# *.dtb used to be generated in the directory above. Clean out the +# old build results so people don't accidentally use them. +dtbs: $(addprefix $(obj)/, $(dtb-y)) + $(Q)rm -f $(obj)/../*.dtb + +clean-files := *.dtb diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87e230e..2c338889df1b 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -13,11 +13,31 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -33,6 +53,36 @@ }; }; + + leds { + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio2 21 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio2 22 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio2 23 0>; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio2 24 0>; + default-state = "off"; + }; + }; }; /include/ "tps65217.dtsi" diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 185d6325a458..9f65f17ebdf8 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -13,11 +13,39 @@ model = "TI AM335x EVM"; compatible = "ti,am335x-evm", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */ + 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */ + 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */ + 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */ + 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -31,6 +59,49 @@ reg = <0x2d>; }; }; + + i2c2: i2c@4802a000 { + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + }; }; vbat: fixedregulator@0 { @@ -40,6 +111,53 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ + &gpio2 26 0 /* Bank1, pin26 */ + &gpio2 27 0>; /* Bank1, pin27 */ + + col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ + &gpio2 22 0>; /* Bank1, pin22 */ + + linux,keymap = <0x0000008b /* MENU */ + 0x0100009e /* BACK */ + 0x02000069 /* LEFT */ + 0x0001006a /* RIGHT */ + 0x0101001c /* ENTER */ + 0x0201006c>; /* DOWN */ + }; + + gpio_keys: volume_keys@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + switch@9 { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio1 2 1>; + gpio-key,wakeup; + }; + + switch@10 { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio1 3 1>; + gpio-key,wakeup; + }; + }; }; /include/ "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts new file mode 100644 index 000000000000..f5a6162a4ff2 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -0,0 +1,250 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * AM335x Starter Kit + * http://www.ti.com/tool/tmdssk3358 + */ + +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM-SK"; + compatible = "ti,am335x-evmsk", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */ + 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */ + 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */ + 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ + >; + }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */ + 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */ + 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */ + 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ + >; + }; + }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "evmsk:green:usr0"; + gpios = <&gpio2 4 0>; + default-state = "off"; + }; + + led@2 { + label = "evmsk:green:usr1"; + gpios = <&gpio2 5 0>; + default-state = "off"; + }; + + led@3 { + label = "evmsk:green:mmc0"; + gpios = <&gpio2 6 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "evmsk:green:heartbeat"; + gpios = <&gpio2 7 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + gpio_buttons: gpio_buttons@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + switch@1 { + label = "button0"; + linux,code = <0x100>; + gpios = <&gpio3 3 0>; + }; + + switch@2 { + label = "button1"; + linux,code = <0x101>; + gpios = <&gpio3 2 0>; + }; + + switch@3 { + label = "button2"; + linux,code = <0x102>; + gpios = <&gpio1 30 0>; + gpio-key,wakeup; + }; + + switch@4 { + label = "button3"; + linux,code = <0x103>; + gpios = <&gpio3 5 0>; + }; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bb31bff01998..20a3f29a6bfe 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,am33xx"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -25,6 +26,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a8"; + + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 720000 1285000 + 600000 1225000 + 500000 1125000 + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; @@ -40,6 +56,15 @@ }; }; + am33xx_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x0238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex.Since @@ -70,7 +95,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x44e07000 0x1000>; - interrupt-parent = <&intc>; interrupts = <96>; }; @@ -82,7 +106,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x4804c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <98>; }; @@ -94,7 +117,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ac000 0x1000>; - interrupt-parent = <&intc>; interrupts = <32>; }; @@ -106,7 +128,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ae000 0x1000>; - interrupt-parent = <&intc>; interrupts = <62>; }; @@ -115,7 +136,6 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; - interrupt-parent = <&intc>; interrupts = <72>; status = "disabled"; }; @@ -125,7 +145,6 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; - interrupt-parent = <&intc>; interrupts = <73>; status = "disabled"; }; @@ -135,7 +154,6 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; - interrupt-parent = <&intc>; interrupts = <74>; status = "disabled"; }; @@ -145,7 +163,6 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; - interrupt-parent = <&intc>; interrupts = <44>; status = "disabled"; }; @@ -155,7 +172,6 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; - interrupt-parent = <&intc>; interrupts = <45>; status = "disabled"; }; @@ -165,7 +181,6 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; - interrupt-parent = <&intc>; interrupts = <46>; status = "disabled"; }; @@ -176,7 +191,6 @@ #size-cells = <0>; ti,hwmods = "i2c1"; reg = <0x44e0b000 0x1000>; - interrupt-parent = <&intc>; interrupts = <70>; status = "disabled"; }; @@ -187,7 +201,6 @@ #size-cells = <0>; ti,hwmods = "i2c2"; reg = <0x4802a000 0x1000>; - interrupt-parent = <&intc>; interrupts = <71>; status = "disabled"; }; @@ -198,7 +211,6 @@ #size-cells = <0>; ti,hwmods = "i2c3"; reg = <0x4819c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <30>; status = "disabled"; }; @@ -207,8 +219,124 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; reg = <0x44e35000 0x1000>; - interrupt-parent = <&intc>; interrupts = <91>; }; + + dcan0: d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + interrupts = <52>; + status = "disabled"; + }; + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + status = "disabled"; + }; + + timer1: timer@44e31000 { + compatible = "ti,omap2-timer"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,omap2-timer"; + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,omap2-timer"; + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,omap2-timer"; + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; + ti,timer-pwm; + }; + + timer5: timer@48046000 { + compatible = "ti,omap2-timer"; + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; + ti,timer-pwm; + }; + + timer6: timer@48048000 { + compatible = "ti,omap2-timer"; + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; + ti,timer-pwm; + }; + + timer7: timer@4804a000 { + compatible = "ti,omap2-timer"; + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; + ti,timer-pwm; + }; + + rtc@44e3e000 { + compatible = "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <75 + 76>; + ti,hwmods = "rtc"; + }; + + spi0: spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48030000 0x400>; + interrupt = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x481a0000 0x400>; + interrupt = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; + status = "disabled"; + }; + + usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; + }; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts new file mode 100644 index 000000000000..74d92cd29d87 --- /dev/null +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -0,0 +1,178 @@ +/* + * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only. + */ + +/dts-v1/; +/include/ "at91sam9260.dtsi" + +/ { + model = "Somfy Animeo IP"; + compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; + + aliases { + serial0 = &usart1; + serial1 = &usart2; + serial2 = &usart0; + serial3 = &dbgu; + serial4 = &usart3; + serial5 = &uart0; + serial6 = &uart1; + }; + + chosen { + linux,stdout-path = &usart2; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart1: serial@fffb4000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart2: serial@fffb8000 { + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; + phy-mode = "mii"; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = <&pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x8000>; + }; + + barebox@8000 { + label = "barebox"; + reg = <0x8000 0x40000>; + }; + + bareboxenv@48000 { + label = "bareboxenv"; + reg = <0x48000 0x8000>; + }; + + user_block@0x50000 { + label = "user_block"; + reg = <0x50000 0xb0000>; + }; + + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x1b0000>; + }; + + root@2b0000 { + label = "root"; + reg = <0x2b0000 0x1D50000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + atmel,vbus-gpio = <&pioB 15 1>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green { + label = "power_green"; + gpios = <&pioC 17 0>; + linux,default-trigger = "heartbeat"; + }; + + power_red { + label = "power_red"; + gpios = <&pioA 2 0>; + }; + + tx_green { + label = "tx_green"; + gpios = <&pioC 19 0>; + }; + + tx_red { + label = "tx_red"; + gpios = <&pioC 18 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + keyswitch_in { + label = "keyswitch_in"; + gpios = <&pioB 1 0>; + linux,code = <28>; + gpio-key,wakeup; + }; + + error_in { + label = "error_in"; + gpios = <&pioB 2 0>; + linux,code = <29>; + gpio-key,wakeup; + }; + + btn { + label = "btn"; + gpios = <&pioC 23 0>; + linux,code = <31>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi new file mode 100644 index 000000000000..e154f242c680 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -0,0 +1,349 @@ +/* + * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Based on at91sam9260.dtsi + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91RM9200 family SoC"; + compatible = "atmel,at91rm9200"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm920t"; + }; + }; + + memory { + reg = <0x20000000 0x04000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <25 26 27 28 29 30 31>; + }; + + ramc0: ramc@ffffff00 { + compatible = "atmel,at91rm9200-sdramc"; + reg = <0xffffff00 0x100>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + st: timer@fffffd00 { + compatible = "atmel,at91rm9200-st"; + reg = <0xfffffd00 0x100>; + interrupts = <1 4 7>; + }; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 4 0 18 4 0 19 4 0>; + }; + + tcb1: timer@fffa4000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa4000 0x100>; + interrupts = <20 4 0 21 4 0 22 4 0>; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffffffff /* pioA */ + 0xffffffff 0x083fffff /* pioB */ + 0xffff3fff 0x00000000 /* pioC */ + 0x03ff87ff 0x0fffff80 /* pioD */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A */ + 0 31 0x1 0x1>; /* PA31 periph with pullup */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0>; /* PA18 periph A */ + }; + + pinctrl_uart0_rts: uart0_rts-0 { + atmel,pins = + <0 20 0x1 0x0>; /* PA20 periph A */ + }; + + pinctrl_uart0_cts: uart0_cts-0 { + atmel,pins = + <0 21 0x1 0x0>; /* PA21 periph A */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <1 20 0x1 0x1 /* PB20 periph A with pullup */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + + pinctrl_uart1_rts: uart1_rts-0 { + atmel,pins = + <1 24 0x1 0x0>; /* PB24 periph A */ + }; + + pinctrl_uart1_cts: uart1_cts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 25 0x1 0x0>; /* PB25 periph A */ + }; + + pinctrl_uart1_dcd: uart1_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_uart1_ri: uart1_ri-0 { + atmel,pins = + <1 18 0x1 0x0>; /* PB18 periph A */ + }; + }; + + uart2 { + pinctrl_uart2: uart2-0 { + atmel,pins = + <0 22 0x1 0x0 /* PA22 periph A */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 30 0x2 0x0>; /* PA30 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 31 0x2 0x0>; /* PA31 periph B */ + }; + }; + + uart3 { + pinctrl_uart3: uart3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 6 0x2 0x0>; /* PA6 periph B */ + }; + + pinctrl_uart3_rts: uart3_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart3_cts: uart3_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ + 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "disabled"; + }; + + usart0: serial@fffc0000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc0000 0x200>; + interrupts = <6 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + usart1: serial@fffc4000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc4000 0x200>; + interrupts = <7 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + + usart2: serial@fffc8000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc8000 0x200>; + interrupts = <8 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; + }; + + usart3: serial@fffcc000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffcc000 0x200>; + interrupts = <23 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; + }; + + usb1: gadget@fffb0000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffb0000 0x4000>; + interrupts = <11 4 2>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "soft"; + gpios = <&pioC 2 0 + 0 + &pioB 1 0 + >; + status = "disabled"; + }; + + usb0: ohci@00300000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00300000 0x100000>; + interrupts = <23 4 2>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts new file mode 100644 index 000000000000..8aa48931e0a2 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -0,0 +1,79 @@ +/* + * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit + * + * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91rm9200.dtsi" + +/ { + model = "Atmel AT91RM9200 evaluation kit"; + compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart1: serial@fffc4000 { + pinctrl-0 = + <&pinctrl_uart1 + &pinctrl_uart1_rts + &pinctrl_uart1_cts + &pinctrl_uart1_dtr_dsr + &pinctrl_uart1_dcd + &pinctrl_uart1_ri>; + status = "okay"; + }; + + usb1: gadget@fffb0000 { + atmel,vbus-gpio = <&pioD 4 0>; + status = "okay"; + }; + }; + + usb0: ohci@00300000 { + num-ports = <2>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds2 { + label = "green"; + gpios = <&pioB 0 0x1>; + linux,default-trigger = "mmc0"; + }; + + ds4 { + label = "yellow"; + gpios = <&pioB 1 0x1>; + linux,default-trigger = "heartbeat"; + }; + + ds6 { + label = "red"; + gpios = <&pioB 2 0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d410581a5a85..b1d3fab60e0a 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -21,8 +21,8 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; - serial5 = &usart4; - serial6 = &usart5; + serial5 = &uart0; + serial6 = &uart1; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -98,40 +98,250 @@ interrupts = <26 4 0 27 4 0 28 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x1>; /* PB15 periph with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 27 0x1 0x0>; /* PB27 periph A */ + }; + + pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { + atmel,pins = + <1 24 0x1 0x0 /* PB24 periph A */ + 1 22 0x1 0x0>; /* PB22 periph A */ + }; + + pinctrl_usart0_dcd: usart0_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_usart0_ri: usart0_ri-0 { + atmel,pins = + <1 25 0x1 0x0>; /* PB25 periph A */ + }; + }; - pioC: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <2 6 0x1 0x1 /* PB6 periph A with pullup */ + 2 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <1 28 0x1 0x0>; /* PB28 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <1 29 0x1 0x0>; /* PB29 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB8 periph A with pullup */ + 1 9 0x1 0x0>; /* PB9 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 10 0x1 0x1 /* PB10 periph A with pullup */ + 2 11 0x1 0x0>; /* PB11 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PB8 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 10 0x2 0x0>; /* PB10 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 31 0x2 0x1 /* PA31 periph B with pullup */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 12 0x1 0x1 /* PB12 periph A with pullup */ + 2 13 0x1 0x0>; /* PB13 periph A */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0 /* PA19 periph A */ + 0 20 0x1 0x0 /* PA20 periph A */ + 0 21 0x1 0x0>; /* PA21 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 22 0x2 0x0 /* PA22 periph B */ + 0 23 0x2 0x0 /* PA23 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + + pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { + atmel,pins = + <0 10 0x2 0x0 /* PA10 periph B */ + 0 11 0x2 0x0 /* PA11 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 1 0x2 0x1 /* PA1 periph B with pullup */ + 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 4 0x2 0x1 /* PA4 periph B with pullup */ + 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -141,6 +351,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -150,6 +362,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -159,6 +373,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -168,24 +384,30 @@ interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; - usart4: serial@fffd4000 { + uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; status = "disabled"; }; - usart5: serial@fffd8000 { + uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "disabled"; }; @@ -193,6 +415,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -212,6 +436,15 @@ status = "disabled"; }; + mmc0: mmc@fffa8000 { + compatible = "atmel,hsmci"; + reg = <0xfffa8000 0x600>; + interrupts = <9 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; @@ -257,6 +490,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 13 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 3e6e5c1abbf3..66106eecf1ed 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -89,60 +89,243 @@ reg = <0xfffffd10 0x10>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B */ + 0xfffffffb 0xffffe07f /* pioA */ + 0x0007ffff 0x39072fff /* pioB */ + 0xffffffff 0x3ffffff8 /* pioC */ + 0xfffffbff 0xffffffff /* pioD */ + 0xffe00fff 0xfbfcff00 /* pioE */ + >; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <2 30 0x1 0x0 /* PC30 periph A */ + 2 31 0x1 0x1>; /* PC31 periph with pullup */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 26 0x1 0x1 /* PA26 periph A with pullup */ + 0 27 0x1 0x0>; /* PA27 periph A */ + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 28 0x1 0x0>; /* PA28 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 29 0x1 0x0>; /* PA29 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <3 0 0x1 0x1 /* PD0 periph A with pullup */ + 3 1 0x1 0x0>; /* PD1 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 7 0x2 0x0>; /* PD7 periph B */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PD8 periph B */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <3 2 0x1 0x1 /* PD2 periph A with pullup */ + 3 3 0x1 0x0>; /* PD3 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <3 5 0x2 0x0>; /* PD5 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <4 6 0x2 0x0>; /* PD6 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ + 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <2 25 0x2 0x0 /* PC25 periph B */ + 4 21 0x1 0x0 /* PE21 periph A */ + 4 23 0x1 0x0 /* PE23 periph A */ + 4 24 0x1 0x0 /* PE24 periph A */ + 4 25 0x1 0x0 /* PE25 periph A */ + 4 26 0x1 0x0 /* PE26 periph A */ + 4 27 0x1 0x0 /* PE27 periph A */ + 4 28 0x1 0x0 /* PE28 periph A */ + 4 29 0x1 0x0 /* PE29 periph A */ + 4 30 0x1 0x0>; /* PE30 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 22 0x2 0x0 /* PC22 periph B */ + 2 23 0x2 0x0 /* PC23 periph B */ + 2 24 0x2 0x0 /* PC24 periph B */ + 2 25 0x2 0x0 /* PC25 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 4 22 0x2 0x0>; /* PE22 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 12 0x1 0x0>; /* PA12 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_clk: mmc1_clk-0 { + atmel,pins = + <0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { + atmel,pins = + <0 21 0x1 0x1 /* PA21 periph A with pullup */ + 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { + atmel,pins = + <0 23 0x1 0x1 /* PA23 periph A with pullup */ + 0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -152,6 +335,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -161,6 +346,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -170,6 +357,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -177,6 +366,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -195,6 +386,24 @@ #size-cells = <0>; status = "disabled"; }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <10 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fff84000 { + compatible = "atmel,hsmci"; + reg = <0xfff84000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -206,6 +415,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioA 22 0 &pioD 15 0 0 diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index f86ac4b609fc..1eb08728f527 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -38,6 +38,10 @@ }; usart0: serial@fff8c000 { + pinctrl-0 = < + &pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; status = "okay"; }; @@ -50,6 +54,31 @@ atmel,vbus-gpio = <&pioA 25 0>; status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 18 0>; + wp-gpios = <&pioE 19 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ + 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi new file mode 100644 index 000000000000..fbe7a7089c2a --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G15 SoC"; + compatible = "atmel, at91sam9g15, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0x00000000 /* pioA */ + 0x00040000 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts new file mode 100644 index 000000000000..86dd3f6d938f --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g15.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index f1b2e148ac8c..66467b113126 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -12,6 +12,32 @@ model = "Atmel at91sam9g20ek 2 mmc"; compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9"; + ahb { + apb{ + mmc0: mmc@fffa8000 { + /* clk already mux wuth slot0 */ + pinctrl-0 = < + &pinctrl_board_mmc0_slot0 + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioC 2 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot0 { + pinctrl_board_mmc0_slot0: mmc0_slot0-board { + atmel,pins = + <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index e6391a4e6649..32a500a0e481 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -35,6 +35,13 @@ }; usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; status = "okay"; }; @@ -51,6 +58,29 @@ atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi new file mode 100644 index 000000000000..05a718fb83c4 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G25 SoC"; + compatible = "atmel, at91sam9g25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000001c /* pioA */ + 0x0007ffff 0x8000fe3f 0x00000000 /* pioB */ + 0x80000000 0x07c0ffff 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 877c08f06763..c5ab16fba059 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,55 +7,10 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x5.dtsi" -/include/ "at91sam9x5cm.dtsi" +/include/ "at91sam9g25.dtsi" +/include/ "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; - - chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@f801c000 { - status = "okay"; - }; - - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - i2c0: i2c@f8010000 { - status = "okay"; - }; - - i2c1: i2c@f8014000 { - status = "okay"; - }; - - i2c2: i2c@f8018000 { - status = "okay"; - }; - }; - - usb0: ohci@00600000 { - status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 - >; - }; - - usb1: ehci@00700000 { - status = "okay"; - }; - }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi new file mode 100644 index 000000000000..f9d14a722794 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G35 SoC"; + compatible = "atmel, at91sam9g35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts new file mode 100644 index 000000000000..95944bdd798d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G35-EK"; + compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3add030d61f8..0741caeeced1 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -108,60 +108,243 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc003ff /* pioA */ + 0xffffffff 0x800f8f00 /* pioB */ + 0xffffffff 0x00000e00 /* pioC */ + 0xffffffff 0xff0c1381 /* pioD */ + 0xffffffff 0x81ffff81 /* pioE */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0>; /* PB13 periph A */ + }; + }; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 19 0x1 0x1 /* PB19 periph A with pullup */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 17 0x2 0x0>; /* PB17 periph B */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 15 0x2 0x0>; /* PB15 periph B */ + }; + }; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + uart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <1 4 0x1 0x1 /* PB4 periph A with pullup */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 16 0x1 0x0>; /* PD16 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 17 0x1 0x0>; /* PD17 periph A */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 6 0x1 0x1 /* PB6 periph A with pullup */ + 1 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <2 9 0x2 0x0>; /* PC9 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <2 11 0x2 0x0>; /* PC11 periph B */ + }; + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB9 periph A with pullup */ + 1 9 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <0 23 0x2 0x0>; /* PA23 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <0 24 0x2 0x0>; /* PA24 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 10 0x1 0x0 /* PA10 periph A */ + 0 11 0x1 0x0 /* PA11 periph A */ + 0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0>; /* PA19 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 6 0x2 0x0 /* PA6 periph B */ + 0 7 0x2 0x0 /* PA7 periph B */ + 0 8 0x2 0x0 /* PA8 periph B */ + 0 9 0x2 0x0 /* PA9 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0 /* PA29 periph B */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A */ + 0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 31 0x1 0x0 /* PA31 periph A */ + 0 22 0x1 0x1 /* PA22 periph A with pullup */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1 /* PA25 periph A with pullup */ + 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { + atmel,pins = + <0 27 0x1 0x1 /* PA27 periph A with pullup */ + 0 28 0x1 0x1 /* PA28 periph A with pullup */ + 0 29 0x1 0x1 /* PA29 periph A with pullup */ + 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -171,6 +354,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -180,6 +365,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -189,6 +376,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -198,6 +387,8 @@ interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -205,6 +396,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -262,6 +455,24 @@ trigger-value = <0x6>; }; }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fffd0000 { + compatible = "atmel,hsmci"; + reg = <0xfffd0000 0x600>; + interrupts = <29 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -273,6 +484,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 8 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 15e1dd43f625..20c31913c270 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -39,6 +39,10 @@ }; usart1: serial@fff90000 { + pinctrl-0 = + <&pinctrl_usart1 + &pinctrl_usart1_rts + &pinctrl_usart1_cts>; status = "okay"; }; @@ -54,6 +58,50 @@ i2c1: i2c@fff88000 { status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 10 0>; + }; + }; + + mmc1: mmc@fffd0000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 11 0>; + wp-gpios = <&pioD 29 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ + 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 82508d68aa7e..e9efb34f4379 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -84,6 +84,15 @@ reg = <0xfffffe10 0x10>; }; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -102,50 +111,186 @@ interrupts = <20 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe07983 0x00000000 /* pioA */ + 0x00040000 0x00047e0f 0x00000000 /* pioB */ + 0xfdffffff 0x07c00000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph with pullup */ + }; + }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x0>; /* PA0 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 7 0x1 0x0>; /* PA7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 23 0x2 0x1 /* PC23 periph B with pullup */ + 2 22 0x2 0x0>; /* PC22 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <2 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <2 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <2 9 0x3 0x1 /* PC9 periph C with pullup */ + 2 8 0x3 0x0>; /* PC8 periph C */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 16 0x3 0x1 /* PC17 periph C with pullup */ + 2 17 0x3 0x0>; /* PC16 periph C */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ + 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 11 0x2 0x1 /* PA11 periph B with pullup */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 13 0x2 0x1 /* PA13 periph B with pullup */ + 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -155,6 +300,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -164,6 +311,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -173,6 +322,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -182,6 +333,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -215,6 +368,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 912b2c283d6f..0376bf4fd66b 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -45,6 +45,28 @@ i2c1: i2c@f8014000 { status = "okay"; }; + + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioA 7 0>; + }; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi new file mode 100644 index 000000000000..54eb33ba6d22 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -0,0 +1,49 @@ +/* + * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X25 SoC"; + compatible = "atmel, at91sam9x25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000001c /* pioA */ + 0x0007ffff 0x00047e3f 0x00000000 /* pioB */ + 0x80000000 0xfffd0000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <2 16 0x2 0x0 /* PC16 periph B */ + 2 18 0x2 0x0 /* PC18 periph B */ + 2 19 0x2 0x0 /* PC19 periph B */ + 2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 2 28 0x2 0x0 /* PC28 periph B */ + 2 29 0x2 0x0 /* PC29 periph B */ + 2 30 0x2 0x0 /* PC30 periph B */ + 2 31 0x2 0x0>; /* PC31 periph B */ + }; + }; + }; + + macb1: ethernet@f8030000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts new file mode 100644 index 000000000000..af907eaa1f25 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x25.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi new file mode 100644 index 000000000000..fb102d6126ce --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X35 SoC"; + compatible = "atmel, at91sam9x35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts new file mode 100644 index 000000000000..5ccb607b5414 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9X35-EK"; + compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 03fc136421c5..7ee49e8daf98 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -111,50 +111,244 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 0 0x1 0x1 /* PA0 periph A with pullup */ + 0 1 0x1 0x0>; /* PA1 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 5 0x1 0x1 /* PA5 periph A with pullup */ + 0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 27 0x3 0x0>; /* PC27 periph C */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 28 0x3 0x0>; /* PC28 periph C */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_uart3: usart3-0 { + atmel,pins = + <3 23 0x2 0x1 /* PC22 periph B with pullup */ + 3 23 0x2 0x0>; /* PC23 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <3 8 0x3 0x0 /* PC8 periph C */ + 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <3 16 0x3 0x0 /* PC16 periph C */ + 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ + 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A */ + 1 1 0x1 0x0 /* PB1 periph A */ + 1 2 0x1 0x0 /* PB2 periph A */ + 1 3 0x1 0x0 /* PB3 periph A */ + 1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0 /* PB5 periph A */ + 1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0>; /* PB10 periph A */ + }; + + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { + atmel,pins = + <1 8 0x1 0x0 /* PA8 periph A */ + 1 11 0x1 0x0 /* PA11 periph A */ + 1 12 0x1 0x0 /* PA12 periph A */ + 1 13 0x1 0x0 /* PA13 periph A */ + 1 14 0x1 0x0 /* PA14 periph A */ + 1 15 0x1 0x0 /* PA15 periph A */ + 1 16 0x1 0x0 /* PA16 periph A */ + 1 17 0x1 0x0>; /* PA17 periph A */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 13 0x2 0x0 /* PA13 periph B */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 2 0x2 0x1 /* PA2 periph B with pullup */ + 0 3 0x2 0x1 /* PA3 periph B with pullup */ + 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc1: mmc@f000c000 { + compatible = "atmel,hsmci"; + reg = <0xf000c000 0x600>; + interrupts = <26 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -164,6 +358,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -173,6 +369,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -182,6 +380,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -189,6 +389,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; }; @@ -273,6 +475,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi new file mode 100644 index 000000000000..8a7cf1d9cf5d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -0,0 +1,101 @@ +/* + * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "at91sam9x5cm.dtsi" + +/ { + model = "Atmel AT91SAM9X5-EK"; + compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0>; + }; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 14 0>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + i2c2: i2c@f8018000 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 19 1 + &pioD 20 1 + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts new file mode 100644 index 000000000000..248067cf7069 --- /dev/null +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +/include/ "bcm11351.dtsi" + +/ { + model = "BCM11351 BRT board"; + compatible = "bcm,bcm11351-brt", "bcm,bcm11351"; + + memory { + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + uart@3e000000 { + status = "okay"; + }; + +}; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi new file mode 100644 index 000000000000..ad135885bd2a --- /dev/null +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "BCM11351 SoC"; + compatible = "bcm,bcm11351"; + interrupt-parent = <&gic>; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + gic: interrupt-controller@3ff00100 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x3ff01000 0x1000>, + <0x3ff00100 0x100>; + }; + + uart@3e000000 { + compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x3e000000 0x1000>; + clock-frequency = <13000000>; + interrupts = <0x0 67 0x4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x3ff20000 0x1000>; + cache-unified; + cache-level = <2>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 7dd860f83f96..9b72054a0bc0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -10,3 +10,18 @@ reg = <0 0x10000000>; }; }; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&alt0 &alt3>; + + alt0: alt0 { + brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>; + brcm,function = <4>; /* alt0 */ + }; + + alt3: alt3 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <7>; /* alt3 */ + }; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 0b619398532c..8917550fd1bb 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -29,11 +29,39 @@ #interrupt-cells = <2>; }; + watchdog { + compatible = "brcm,bcm2835-pm-wdt"; + reg = <0x7e100000 0x28>; + }; + uart@20201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; clock-frequency = <3000000>; }; + + gpio: gpio { + compatible = "brcm,bcm2835-gpio"; + reg = <0x7e200000 0xb4>; + /* + * The GPIO IP block is designed for 3 banks of GPIOs. + * Each bank has a GPIO interrupt for itself. + * There is an overall "any bank" interrupt. + * In order, these are GIC interrupts 17, 18, 19, 20. + * Since the BCM2835 only has 2 banks, the 2nd bank + * interrupt output appears to be mirrored onto the + * 3rd bank's interrupt signal. + * So, a bank0 interrupt shows up on 17, 20, and + * a bank1 interrupt shows up on 18, 19, 20! + */ + interrupts = <2 17>, <2 18>, <2 19>, <2 20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts new file mode 100644 index 000000000000..422fdb3fcfc1 --- /dev/null +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -0,0 +1,30 @@ +/* + * Device Tree for AM1808 EnBW CMC board + * + * Copyright 2012 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/dts-v1/; +/include/ "da850.dtsi" + +/ { + compatible = "enbw,cmc", "ti,da850"; + model = "EnBW CMC"; + + soc { + serial0: serial@1c42000 { + status = "okay"; + }; + serial1: serial@1d0c000 { + status = "okay"; + }; + serial2: serial@1d0d000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts new file mode 100644 index 000000000000..37dc5a3243b8 --- /dev/null +++ b/arch/arm/boot/dts/da850-evm.dts @@ -0,0 +1,28 @@ +/* + * Device Tree for DA850 EVM board + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + */ +/dts-v1/; +/include/ "da850.dtsi" + +/ { + compatible = "ti,da850-evm", "ti,da850"; + model = "DA850/AM1808/OMAP-L138 EVM"; + + soc { + serial0: serial@1c42000 { + status = "okay"; + }; + serial1: serial@1d0c000 { + status = "okay"; + }; + serial2: serial@1d0d000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi new file mode 100644 index 000000000000..640ab75c20db --- /dev/null +++ b/arch/arm/boot/dts/da850.dtsi @@ -0,0 +1,60 @@ +/* + * Copyright 2012 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/include/ "skeleton.dtsi" + +/ { + arm { + #address-cells = <1>; + #size-cells = <1>; + ranges; + intc: interrupt-controller { + compatible = "ti,cp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <100>; + reg = <0xfffee000 0x2000>; + }; + }; + soc { + compatible = "simple-bus"; + model = "da850"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x01c00000 0x400000>; + + serial0: serial@1c42000 { + compatible = "ns16550a"; + reg = <0x42000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <25>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + serial1: serial@1d0c000 { + compatible = "ns16550a"; + reg = <0x10c000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <53>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + serial2: serial@1d0d000 { + compatible = "ns16550a"; + reg = <0x10d000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <61>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 4b0e0ca08f40..731086b2fca2 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -203,6 +203,14 @@ reg = <0x80157450 0xC>; }; + thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupts = <21 0x4>, <22 0x4>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + status = "disabled"; + }; + db8500-prcmu-regulators { compatible = "stericsson,db8500-prcmu-regulator"; @@ -660,5 +668,11 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + cpufreq-cooling { + compatible = "stericsson,db8500-cpufreq-cooling"; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts new file mode 100644 index 000000000000..46477ac1de99 --- /dev/null +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -0,0 +1,104 @@ +/* + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; + +/* First 4KB has pen for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; + +/ { + model = "Calxeda ECX-2000"; + compatible = "calxeda,ecx-2000"; + #address-cells = <2>; + #size-cells = <2>; + clock-ranges; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a15"; + reg = <0>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + reg = <1>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + reg = <2>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + reg = <3>; + clocks = <&a9pll>; + clock-names = "cpu"; + }; + }; + + memory@0 { + name = "memory"; + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0xff800000>; + }; + + memory@200000000 { + name = "memory"; + device_type = "memory"; + reg = <0x00000002 0x00000000 0x00000003 0x00000000>; + }; + + soc { + ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>; + + timer { + compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + #address-cells = <1>; + interrupt-controller; + interrupts = <1 9 0xf04>; + reg = <0xfff11000 0x1000>, + <0xfff12000 0x1000>, + <0xfff14000 0x2000>, + <0xfff16000 0x2000>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + }; + }; +}; + +/include/ "ecx-common.dtsi" diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi new file mode 100644 index 000000000000..d61b535f682a --- /dev/null +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -0,0 +1,237 @@ +/* + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/ { + chosen { + bootargs = "console=ttyAMA0"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + + sata@ffe08000 { + compatible = "calxeda,hb-ahci"; + reg = <0xffe08000 0x10000>; + interrupts = <0 83 4>; + dma-coherent; + calxeda,port-phys = <&combophy5 0 &combophy0 0 + &combophy0 1 &combophy0 2 + &combophy0 3>; + }; + + sdhci@ffe0e000 { + compatible = "calxeda,hb-sdhci"; + reg = <0xffe0e000 0x1000>; + interrupts = <0 90 4>; + clocks = <&eclk>; + status = "disabled"; + }; + + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; + + ipc@fff20000 { + compatible = "arm,pl320", "arm,primecell"; + reg = <0xfff20000 0x1000>; + interrupts = <0 7 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpioe: gpio@fff30000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff30000 0x1000>; + interrupts = <0 14 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpiof: gpio@fff31000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff31000 0x1000>; + interrupts = <0 15 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpiog: gpio@fff32000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff32000 0x1000>; + interrupts = <0 16 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpioh: gpio@fff33000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff33000 0x1000>; + interrupts = <0 17 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + timer@fff34000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfff34000 0x1000>; + interrupts = <0 18 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + rtc@fff35000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0xfff35000 0x1000>; + interrupts = <0 19 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + serial@fff36000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfff36000 0x1000>; + interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + smic@fff3a000 { + compatible = "ipmi-smic"; + device_type = "ipmi"; + reg = <0xfff3a000 0x1000>; + interrupts = <0 24 4>; + reg-size = <4>; + reg-spacing = <4>; + }; + + sregs@fff3c000 { + compatible = "calxeda,hb-sregs"; + reg = <0xfff3c000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + a9bclk: a9bclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9bus-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + emmcpll: emmcpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x10C>; + }; + + eclk: eclk { + #clock-cells = <0>; + compatible = "calxeda,hb-emmc-clock"; + clocks = <&emmcpll>; + reg = <0x114>; + }; + + pclk: pclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <150000000>; + }; + }; + }; + + dma@fff3d000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfff3d000 0x1000>; + interrupts = <0 92 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4 0 78 4 0 79 4>; + dma-coherent; + }; + + ethernet@fff51000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff51000 0x1000>; + interrupts = <0 80 4 0 81 4 0 82 4>; + dma-coherent; + }; + + combophy0: combo-phy@fff58000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff58000 0x1000>; + phydev = <5>; + }; + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index a26c3dd58269..96d4462730fb 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -244,5 +244,11 @@ reg = <0x12690000 0x1000>; interrupts = <0 36 0>; }; + + mdma1: mdma@12850000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12850000 0x1000>; + interrupts = <0 34 0>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index b12cf272ad0d..6a4a1a04221c 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -16,6 +16,134 @@ / { pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe3: gpe3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe4: gpe4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; samsung,pin-function = <0x2>; @@ -205,6 +333,151 @@ }; pinctrl@11000000 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + sd0_clk: sd0-clk { samsung,pins = "gpk0-0"; samsung,pin-function = <2>; @@ -438,6 +711,11 @@ }; pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + }; + i2s0_bus: i2s0-bus { samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", "gpz-4", "gpz-5", "gpz-6"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 214c557eda7f..d877dbe7ac0e 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -46,27 +46,17 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; - interrupt-controller; - #interrupt-cells = <2>; }; pinctrl_1: pinctrl@11000000 { compatible = "samsung,pinctrl-exynos4210"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; - interrupt-controller; - #interrupt-cells = <2>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, - <0 32 0>; + interrupts = <0 32 0>; }; }; @@ -74,233 +64,4 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x03860000 0x1000>; }; - - gpio-controllers { - #address-cells = <1>; - #size-cells = <1>; - gpio-controller; - ranges; - - gpa0: gpio-controller@11400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400000 0x20>; - #gpio-cells = <4>; - }; - - gpa1: gpio-controller@11400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400020 0x20>; - #gpio-cells = <4>; - }; - - gpb: gpio-controller@11400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400040 0x20>; - #gpio-cells = <4>; - }; - - gpc0: gpio-controller@11400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400060 0x20>; - #gpio-cells = <4>; - }; - - gpc1: gpio-controller@11400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400080 0x20>; - #gpio-cells = <4>; - }; - - gpd0: gpio-controller@114000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000A0 0x20>; - #gpio-cells = <4>; - }; - - gpd1: gpio-controller@114000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000C0 0x20>; - #gpio-cells = <4>; - }; - - gpe0: gpio-controller@114000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000E0 0x20>; - #gpio-cells = <4>; - }; - - gpe1: gpio-controller@11400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400100 0x20>; - #gpio-cells = <4>; - }; - - gpe2: gpio-controller@11400120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400120 0x20>; - #gpio-cells = <4>; - }; - - gpe3: gpio-controller@11400140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400140 0x20>; - #gpio-cells = <4>; - }; - - gpe4: gpio-controller@11400160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400160 0x20>; - #gpio-cells = <4>; - }; - - gpf0: gpio-controller@11400180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400180 0x20>; - #gpio-cells = <4>; - }; - - gpf1: gpio-controller@114001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001A0 0x20>; - #gpio-cells = <4>; - }; - - gpf2: gpio-controller@114001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001C0 0x20>; - #gpio-cells = <4>; - }; - - gpf3: gpio-controller@114001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001E0 0x20>; - #gpio-cells = <4>; - }; - - gpj0: gpio-controller@11000000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000000 0x20>; - #gpio-cells = <4>; - }; - - gpj1: gpio-controller@11000020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000020 0x20>; - #gpio-cells = <4>; - }; - - gpk0: gpio-controller@11000040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000040 0x20>; - #gpio-cells = <4>; - }; - - gpk1: gpio-controller@11000060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000060 0x20>; - #gpio-cells = <4>; - }; - - gpk2: gpio-controller@11000080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000080 0x20>; - #gpio-cells = <4>; - }; - - gpk3: gpio-controller@110000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000A0 0x20>; - #gpio-cells = <4>; - }; - - gpl0: gpio-controller@110000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000C0 0x20>; - #gpio-cells = <4>; - }; - - gpl1: gpio-controller@110000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000E0 0x20>; - #gpio-cells = <4>; - }; - - gpl2: gpio-controller@11000100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000100 0x20>; - #gpio-cells = <4>; - }; - - gpy0: gpio-controller@11000120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000120 0x20>; - #gpio-cells = <4>; - }; - - gpy1: gpio-controller@11000140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000140 0x20>; - #gpio-cells = <4>; - }; - - gpy2: gpio-controller@11000160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000160 0x20>; - #gpio-cells = <4>; - }; - - gpy3: gpio-controller@11000180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000180 0x20>; - #gpio-cells = <4>; - }; - - gpy4: gpio-controller@110001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001A0 0x20>; - #gpio-cells = <4>; - }; - - gpy5: gpio-controller@110001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001C0 0x20>; - #gpio-cells = <4>; - }; - - gpy6: gpio-controller@110001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001E0 0x20>; - #gpio-cells = <4>; - }; - - gpx0: gpio-controller@11000C00 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C00 0x20>; - #gpio-cells = <4>; - }; - - gpx1: gpio-controller@11000C20 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C20 0x20>; - #gpio-cells = <4>; - }; - - gpx2: gpio-controller@11000C40 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C40 0x20>; - #gpio-cells = <4>; - }; - - gpx3: gpio-controller@11000C60 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C60 0x20>; - #gpio-cells = <4>; - }; - - gpz: gpio-controller@03860000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x03860000 0x20>; - #gpio-cells = <4>; - }; - }; }; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts new file mode 100644 index 000000000000..921c83cf694f --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -0,0 +1,46 @@ +/* + * SAMSUNG SSDK5440 board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5440.dtsi" + +/ { + model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; + compatible = "samsung,ssdk5440", "samsung,exynos5440"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + chosen { + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc"; + }; + + spi { + status = "disabled"; + }; + + i2c@F0000 { + status = "disabled"; + }; + + i2c@100000 { + status = "disabled"; + }; + + watchdog { + status = "disabled"; + }; + + rtc { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi new file mode 100644 index 000000000000..024269de8ee5 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -0,0 +1,159 @@ +/* + * SAMSUNG EXYNOS5440 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos5440"; + + interrupt-parent = <&gic>; + + gic:interrupt-controller@2E0000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2E1000 0x1000>, <0x2E2000 0x1000>; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>; + clock-frequency = <1000000>; + }; + }; + cpu@1 { + compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 14 0xf08>; + clock-frequency = <1000000>; + }; + }; + cpu@2 { + compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 14 0xf08>; + clock-frequency = <1000000>; + }; + }; + cpu@3 { + compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 14 0xf08>; + clock-frequency = <1000000>; + }; + }; + }; + + common { + compatible = "samsung,exynos5440"; + + }; + + serial@B0000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xB0000 0x1000>; + interrupts = <0 2 0>; + }; + + serial@C0000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xC0000 0x1000>; + interrupts = <0 3 0>; + }; + + spi { + compatible = "samsung,exynos4210-spi"; + reg = <0xD0000 0x1000>; + interrupts = <0 4 0>; + tx-dma-channel = <&pdma0 5>; /* preliminary */ + rx-dma-channel = <&pdma0 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + pinctrl { + compatible = "samsung,pinctrl-exynos5440"; + reg = <0xE0000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + + fan: fan { + samsung,exynos5440-pin-function = <1>; + }; + + hdd_led0: hdd_led0 { + samsung,exynos5440-pin-function = <2>; + }; + + hdd_led1: hdd_led1 { + samsung,exynos5440-pin-function = <3>; + }; + + uart1: uart1 { + samsung,exynos5440-pin-function = <4>; + }; + }; + + i2c@F0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xF0000 0x1000>; + interrupts = <0 5 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@100000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x100000 0x1000>; + interrupts = <0 6 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + watchdog { + compatible = "samsung,s3c2410-wdt"; + reg = <0x110000 0x1000>; + interrupts = <0 1 0>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <0 34 0>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121000 0x1000>; + interrupts = <0 35 0>; + }; + }; + + rtc { + compatible = "samsung,s3c6410-rtc"; + reg = <0x130000 0x1000>; + interrupts = <0 16 0>, <0 17 0>; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 0c6fc34821f9..a9ae5d32e80d 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -69,16 +69,8 @@ reg = <0x00000000 0xff900000>; }; - chosen { - bootargs = "console=ttyAMA0"; - }; - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; + ranges = <0x00000000 0x00000000 0xffffffff>; timer@fff10600 { compatible = "arm,cortex-a9-twd-timer"; @@ -117,173 +109,6 @@ interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; }; - sata@ffe08000 { - compatible = "calxeda,hb-ahci"; - reg = <0xffe08000 0x10000>; - interrupts = <0 83 4>; - calxeda,port-phys = <&combophy5 0 &combophy0 0 - &combophy0 1 &combophy0 2 - &combophy0 3>; - dma-coherent; - }; - - sdhci@ffe0e000 { - compatible = "calxeda,hb-sdhci"; - reg = <0xffe0e000 0x1000>; - interrupts = <0 90 4>; - clocks = <&eclk>; - }; - - memory-controller@fff00000 { - compatible = "calxeda,hb-ddr-ctrl"; - reg = <0xfff00000 0x1000>; - interrupts = <0 91 4>; - }; - - ipc@fff20000 { - compatible = "arm,pl320", "arm,primecell"; - reg = <0xfff20000 0x1000>; - interrupts = <0 7 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpioe: gpio@fff30000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff30000 0x1000>; - interrupts = <0 14 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpiof: gpio@fff31000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff31000 0x1000>; - interrupts = <0 15 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpiog: gpio@fff32000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff32000 0x1000>; - interrupts = <0 16 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpioh: gpio@fff33000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0xfff33000 0x1000>; - interrupts = <0 17 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - timer { - compatible = "arm,sp804", "arm,primecell"; - reg = <0xfff34000 0x1000>; - interrupts = <0 18 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - rtc@fff35000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0xfff35000 0x1000>; - interrupts = <0 19 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - serial@fff36000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xfff36000 0x1000>; - interrupts = <0 20 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - smic@fff3a000 { - compatible = "ipmi-smic"; - device_type = "ipmi"; - reg = <0xfff3a000 0x1000>; - interrupts = <0 24 4>; - reg-size = <4>; - reg-spacing = <4>; - }; - - sregs@fff3c000 { - compatible = "calxeda,hb-sregs"; - reg = <0xfff3c000 0x1000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <33333000>; - }; - - ddrpll: ddrpll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x108>; - }; - - a9pll: a9pll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x100>; - }; - - a9periphclk: a9periphclk { - #clock-cells = <0>; - compatible = "calxeda,hb-a9periph-clock"; - clocks = <&a9pll>; - reg = <0x104>; - }; - - a9bclk: a9bclk { - #clock-cells = <0>; - compatible = "calxeda,hb-a9bus-clock"; - clocks = <&a9pll>; - reg = <0x104>; - }; - - emmcpll: emmcpll { - #clock-cells = <0>; - compatible = "calxeda,hb-pll-clock"; - clocks = <&osc>; - reg = <0x10C>; - }; - - eclk: eclk { - #clock-cells = <0>; - compatible = "calxeda,hb-emmc-clock"; - clocks = <&emmcpll>; - reg = <0x114>; - }; - - pclk: pclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <150000000>; - }; - }; - }; sregs@fff3c200 { compatible = "calxeda,hb-sregs-l2-ecc"; @@ -291,38 +116,7 @@ interrupts = <0 71 4 0 72 4>; }; - dma@fff3d000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0xfff3d000 0x1000>; - interrupts = <0 92 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - ethernet@fff50000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; - }; - - ethernet@fff51000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff51000 0x1000>; - interrupts = <0 80 4 0 81 4 0 82 4>; - }; - - combophy0: combo-phy@fff58000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff58000 0x1000>; - phydev = <5>; - }; - - combophy5: combo-phy@fff5d000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff5d000 0x1000>; - phydev = <31>; - }; }; }; + +/include/ "ecx-common.dtsi" diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index 0a8978a40ece..b01c0d745fc5 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -23,10 +23,6 @@ soc { aipi@10000000 { /* aipi */ - wdog@10002000 { - status = "okay"; - }; - uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 3e54f1498841..67d672792b0d 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -113,7 +113,7 @@ i2c1: i2c@10012000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x10012000 0x1000>; interrupts = <12>; status = "disabled"; @@ -205,7 +205,7 @@ i2c2: i2c@1001d000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x1001d000 0x1000>; interrupts = <1>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 55c57ea6169e..b4587b27ae42 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -799,6 +799,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cbd2b1c7487b..567e7ee72f91 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -22,6 +22,22 @@ }; soc { + display@di0 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1_1>; + }; + + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 1>; + interface-pix-fmt = "rgb565"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp2_1>; + }; + aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 75d069fcf897..2781e47cff0d 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -62,6 +62,13 @@ interrupt-parent = <&tzic>; ranges; + ipu: ipu@40000000 { + #crtc-cells = <1>; + compatible = "fsl,imx51-ipu"; + reg = <0x40000000 0x20000000>; + interrupts = <11 10>; + }; + aips@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -80,6 +87,8 @@ compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; + clocks = <&clks 44>, <&clks 0>, <&clks 71>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -87,6 +96,8 @@ compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; + clocks = <&clks 45>, <&clks 0>, <&clks 72>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -94,6 +105,8 @@ compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x7000c000 0x4000>; interrupts = <33>; + clocks = <&clks 32>, <&clks 33>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -103,6 +116,8 @@ compatible = "fsl,imx51-ecspi"; reg = <0x70010000 0x4000>; interrupts = <36>; + clocks = <&clks 51>, <&clks 52>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -110,6 +125,7 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; + clocks = <&clks 49>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -119,6 +135,8 @@ compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; interrupts = <3>; + clocks = <&clks 46>, <&clks 0>, <&clks 73>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -126,6 +144,8 @@ compatible = "fsl,imx51-esdhc"; reg = <0x70024000 0x4000>; interrupts = <4>; + clocks = <&clks 47>, <&clks 0>, <&clks 74>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; }; @@ -202,12 +222,14 @@ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; + clocks = <&clks 0>; }; wdog@73f9c000 { /* WDOG2 */ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f9c000 0x4000>; interrupts = <59>; + clocks = <&clks 0>; status = "disabled"; }; @@ -295,6 +317,66 @@ }; }; + ipu_disp1 { + pinctrl_ipu_disp1_1: ipudisp1grp-1 { + fsl,pins = < + 528 0x5 /* MX51_PAD_DISP1_DAT0__DISP1_DAT0 */ + 529 0x5 /* MX51_PAD_DISP1_DAT1__DISP1_DAT1 */ + 530 0x5 /* MX51_PAD_DISP1_DAT2__DISP1_DAT2 */ + 531 0x5 /* MX51_PAD_DISP1_DAT3__DISP1_DAT3 */ + 532 0x5 /* MX51_PAD_DISP1_DAT4__DISP1_DAT4 */ + 533 0x5 /* MX51_PAD_DISP1_DAT5__DISP1_DAT5 */ + 535 0x5 /* MX51_PAD_DISP1_DAT6__DISP1_DAT6 */ + 537 0x5 /* MX51_PAD_DISP1_DAT7__DISP1_DAT7 */ + 539 0x5 /* MX51_PAD_DISP1_DAT8__DISP1_DAT8 */ + 541 0x5 /* MX51_PAD_DISP1_DAT9__DISP1_DAT9 */ + 543 0x5 /* MX51_PAD_DISP1_DAT10__DISP1_DAT10 */ + 545 0x5 /* MX51_PAD_DISP1_DAT11__DISP1_DAT11 */ + 547 0x5 /* MX51_PAD_DISP1_DAT12__DISP1_DAT12 */ + 549 0x5 /* MX51_PAD_DISP1_DAT13__DISP1_DAT13 */ + 551 0x5 /* MX51_PAD_DISP1_DAT14__DISP1_DAT14 */ + 553 0x5 /* MX51_PAD_DISP1_DAT15__DISP1_DAT15 */ + 555 0x5 /* MX51_PAD_DISP1_DAT16__DISP1_DAT16 */ + 557 0x5 /* MX51_PAD_DISP1_DAT17__DISP1_DAT17 */ + 559 0x5 /* MX51_PAD_DISP1_DAT18__DISP1_DAT18 */ + 563 0x5 /* MX51_PAD_DISP1_DAT19__DISP1_DAT19 */ + 567 0x5 /* MX51_PAD_DISP1_DAT20__DISP1_DAT20 */ + 571 0x5 /* MX51_PAD_DISP1_DAT21__DISP1_DAT21 */ + 575 0x5 /* MX51_PAD_DISP1_DAT22__DISP1_DAT22 */ + 579 0x5 /* MX51_PAD_DISP1_DAT23__DISP1_DAT23 */ + 584 0x5 /* MX51_PAD_DI1_PIN2__DI1_PIN2 (hsync) */ + 583 0x5 /* MX51_PAD_DI1_PIN3__DI1_PIN3 (vsync) */ + >; + }; + }; + + ipu_disp2 { + pinctrl_ipu_disp2_1: ipudisp2grp-1 { + fsl,pins = < + 603 0x5 /* MX51_PAD_DISP2_DAT0__DISP2_DAT0 */ + 608 0x5 /* MX51_PAD_DISP2_DAT1__DISP2_DAT1 */ + 613 0x5 /* MX51_PAD_DISP2_DAT2__DISP2_DAT2 */ + 614 0x5 /* MX51_PAD_DISP2_DAT3__DISP2_DAT3 */ + 615 0x5 /* MX51_PAD_DISP2_DAT4__DISP2_DAT4 */ + 616 0x5 /* MX51_PAD_DISP2_DAT5__DISP2_DAT5 */ + 617 0x5 /* MX51_PAD_DISP2_DAT6__DISP2_DAT6 */ + 622 0x5 /* MX51_PAD_DISP2_DAT7__DISP2_DAT7 */ + 627 0x5 /* MX51_PAD_DISP2_DAT8__DISP2_DAT8 */ + 633 0x5 /* MX51_PAD_DISP2_DAT9__DISP2_DAT9 */ + 637 0x5 /* MX51_PAD_DISP2_DAT10__DISP2_DAT10 */ + 643 0x5 /* MX51_PAD_DISP2_DAT11__DISP2_DAT11 */ + 648 0x5 /* MX51_PAD_DISP2_DAT12__DISP2_DAT12 */ + 652 0x5 /* MX51_PAD_DISP2_DAT13__DISP2_DAT13 */ + 656 0x5 /* MX51_PAD_DISP2_DAT14__DISP2_DAT14 */ + 661 0x5 /* MX51_PAD_DISP2_DAT15__DISP2_DAT15 */ + 593 0x5 /* MX51_PAD_DI2_PIN2__DI2_PIN2 (hsync) */ + 595 0x5 /* MX51_PAD_DI2_PIN3__DI2_PIN3 (vsync) */ + 597 0x5 /* MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK */ + 599 0x5 /* MX51_PAD_DI_GP4__DI2_PIN15 */ + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -327,10 +409,30 @@ }; }; + pwm1: pwm@73fb4000 { + #pwm-cells = <2>; + compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; + reg = <0x73fb4000 0x4000>; + clocks = <&clks 37>, <&clks 38>; + clock-names = "ipg", "per"; + interrupts = <61>; + }; + + pwm2: pwm@73fb8000 { + #pwm-cells = <2>; + compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; + reg = <0x73fb8000 0x4000>; + clocks = <&clks 39>, <&clks 40>; + clock-names = "ipg", "per"; + interrupts = <94>; + }; + uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; + clocks = <&clks 28>, <&clks 29>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -338,8 +440,17 @@ compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fc0000 0x4000>; interrupts = <32>; + clocks = <&clks 30>, <&clks 31>; + clock-names = "ipg", "per"; status = "disabled"; }; + + clks: ccm@73fd4000{ + compatible = "fsl,imx51-ccm"; + reg = <0x73fd4000 0x4000>; + interrupts = <0 71 0x04 0 72 0x04>; + #clock-cells = <1>; + }; }; aips@80000000 { /* AIPS2 */ @@ -355,6 +466,8 @@ compatible = "fsl,imx51-ecspi"; reg = <0x83fac000 0x4000>; interrupts = <37>; + clocks = <&clks 53>, <&clks 54>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -362,6 +475,8 @@ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; + clocks = <&clks 56>, <&clks 56>; + clock-names = "ipg", "ahb"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; @@ -371,24 +486,28 @@ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; reg = <0x83fc0000 0x4000>; interrupts = <38>; + clocks = <&clks 55>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; i2c@83fc4000 { /* I2C2 */ #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc4000 0x4000>; interrupts = <63>; + clocks = <&clks 35>; status = "disabled"; }; i2c@83fc8000 { /* I2C1 */ #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc8000 0x4000>; interrupts = <62>; + clocks = <&clks 34>; status = "disabled"; }; @@ -396,6 +515,7 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; + clocks = <&clks 48>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -411,6 +531,7 @@ compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; + clocks = <&clks 60>; status = "disabled"; }; @@ -418,6 +539,7 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>; + clocks = <&clks 50>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -427,6 +549,8 @@ compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; + clocks = <&clks 42>, <&clks 42>, <&clks 42>; + clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 76ebb1ad2675..da9a047ce4cf 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -67,6 +67,13 @@ interrupt-parent = <&tzic>; ranges; + ipu: ipu@18000000 { + #crtc-cells = <1>; + compatible = "fsl,imx53-ipu"; + reg = <0x18000000 0x080000000>; + interrupts = <11 10>; + }; + aips@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -85,6 +92,8 @@ compatible = "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; + clocks = <&clks 44>, <&clks 0>, <&clks 71>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -92,6 +101,8 @@ compatible = "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; + clocks = <&clks 45>, <&clks 0>, <&clks 72>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -99,6 +110,8 @@ compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; interrupts = <33>; + clocks = <&clks 32>, <&clks 33>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -108,6 +121,8 @@ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; reg = <0x50010000 0x4000>; interrupts = <36>; + clocks = <&clks 51>, <&clks 52>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -115,6 +130,7 @@ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <30>; + clocks = <&clks 49>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -124,6 +140,8 @@ compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; + clocks = <&clks 46>, <&clks 0>, <&clks 73>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -131,6 +149,8 @@ compatible = "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; + clocks = <&clks 47>, <&clks 0>, <&clks 74>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; }; @@ -207,12 +227,14 @@ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; + clocks = <&clks 0>; }; wdog@53f9c000 { /* WDOG2 */ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f9c000 0x4000>; interrupts = <59>; + clocks = <&clks 0>; status = "disabled"; }; @@ -371,10 +393,30 @@ }; }; + pwm1: pwm@53fb4000 { + #pwm-cells = <2>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb4000 0x4000>; + clocks = <&clks 37>, <&clks 38>; + clock-names = "ipg", "per"; + interrupts = <61>; + }; + + pwm2: pwm@53fb8000 { + #pwm-cells = <2>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb8000 0x4000>; + clocks = <&clks 39>, <&clks 40>; + clock-names = "ipg", "per"; + interrupts = <94>; + }; + uart1: serial@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; interrupts = <31>; + clocks = <&clks 28>, <&clks 29>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -382,6 +424,8 @@ compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fc0000 0x4000>; interrupts = <32>; + clocks = <&clks 30>, <&clks 31>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -389,6 +433,8 @@ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; + clocks = <&clks 158>, <&clks 157>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -396,9 +442,18 @@ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; + clocks = <&clks 158>, <&clks 157>; + clock-names = "ipg", "per"; status = "disabled"; }; + clks: ccm@53fd4000{ + compatible = "fsl,imx53-ccm"; + reg = <0x53fd4000 0x4000>; + interrupts = <0 71 0x04 0 72 0x04>; + #clock-cells = <1>; + }; + gpio5: gpio@53fdc000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fdc000 0x4000>; @@ -432,9 +487,10 @@ i2c@53fec000 { /* I2C3 */ #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x53fec000 0x4000>; interrupts = <64>; + clocks = <&clks 88>; status = "disabled"; }; @@ -442,6 +498,8 @@ compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53ff0000 0x4000>; interrupts = <13>; + clocks = <&clks 65>, <&clks 66>; + clock-names = "ipg", "per"; status = "disabled"; }; }; @@ -457,6 +515,8 @@ compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x63f90000 0x4000>; interrupts = <86>; + clocks = <&clks 67>, <&clks 68>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -466,6 +526,8 @@ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; reg = <0x63fac000 0x4000>; interrupts = <37>; + clocks = <&clks 53>, <&clks 54>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -473,6 +535,8 @@ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; + clocks = <&clks 56>, <&clks 56>; + clock-names = "ipg", "ahb"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; @@ -482,24 +546,28 @@ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; reg = <0x63fc0000 0x4000>; interrupts = <38>; + clocks = <&clks 55>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; i2c@63fc4000 { /* I2C2 */ #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x63fc4000 0x4000>; interrupts = <63>; + clocks = <&clks 35>; status = "disabled"; }; i2c@63fc8000 { /* I2C1 */ #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x63fc8000 0x4000>; interrupts = <62>; + clocks = <&clks 34>; status = "disabled"; }; @@ -507,6 +575,7 @@ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; interrupts = <29>; + clocks = <&clks 48>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -522,6 +591,7 @@ compatible = "fsl,imx53-nand"; reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; interrupts = <8>; + clocks = <&clks 60>; status = "disabled"; }; @@ -529,6 +599,7 @@ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; interrupts = <96>; + clocks = <&clks 50>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; @@ -538,6 +609,8 @@ compatible = "fsl,imx53-fec", "fsl,imx25-fec"; reg = <0x63fec000 0x4000>; interrupts = <87>; + clocks = <&clks 42>, <&clks 42>, <&clks 42>; + clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index f3990b04fecf..d907d062e5dd 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -268,23 +268,39 @@ }; pwm@02080000 { /* PWM1 */ + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 0x04>; + clocks = <&clks 62>, <&clks 145>; + clock-names = "ipg", "per"; }; pwm@02084000 { /* PWM2 */ + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 0x04>; + clocks = <&clks 62>, <&clks 146>; + clock-names = "ipg", "per"; }; pwm@02088000 { /* PWM3 */ + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 0x04>; + clocks = <&clks 62>, <&clks 147>; + clock-names = "ipg", "per"; }; pwm@0208c000 { /* PWM4 */ + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 0x04>; + clocks = <&clks 62>, <&clks 148>; + clock-names = "ipg", "per"; }; flexcan@02090000 { /* CAN1 */ @@ -882,7 +898,7 @@ i2c@021a0000 { /* I2C1 */ #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a0000 0x4000>; interrupts = <0 36 0x04>; clocks = <&clks 125>; @@ -892,7 +908,7 @@ i2c@021a4000 { /* I2C2 */ #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a4000 0x4000>; interrupts = <0 37 0x04>; clocks = <&clks 126>; @@ -902,7 +918,7 @@ i2c@021a8000 { /* I2C3 */ #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a8000 0x4000>; interrupts = <0 38 0x04>; clocks = <&clks 127>; @@ -1001,5 +1017,23 @@ status = "disabled"; }; }; + + ipu1: ipu@02400000 { + #crtc-cells = <1>; + compatible = "fsl,imx6q-ipu"; + reg = <0x02400000 0x400000>; + interrupts = <0 6 0x4 0 5 0x4>; + clocks = <&clks 130>, <&clks 131>, <&clks 132>; + clock-names = "bus", "di0", "di1"; + }; + + ipu2: ipu@02800000 { + #crtc-cells = <1>; + compatible = "fsl,imx6q-ipu"; + reg = <0x02800000 0x400000>; + interrupts = <0 8 0x4 0 7 0x4>; + clocks = <&clks 133>, <&clks 134>, <&clks 137>; + clock-names = "bus", "di0", "di1"; + }; }; }; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 61767757b50a..c9c3fa344647 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -18,6 +18,11 @@ bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; }; + syscon { + /* AP system controller registers */ + reg = <0x11000000 0x100>; + }; + timer0: timer@13000000 { compatible = "arm,integrator-timer"; }; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 2dd5e4e48481..8b119399025a 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -18,6 +18,11 @@ bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; + cpcon { + /* CP controller registers */ + reg = <0xcb000000 0x100>; + }; + timer0: timer@13000000 { compatible = "arm,sp804", "arm,primecell"; }; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts new file mode 100644 index 000000000000..0bdce0ad7277 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Internet Space v2"; + compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8fea375c734d..798e60eeedf3 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -94,4 +94,15 @@ gpios = <&gpio1 16 1>; }; }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 19 1 + &gpio0 18 1>; + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + alarm-gpios = <&gpio1 8 0>; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts new file mode 100644 index 000000000000..ac3c080bed21 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -0,0 +1,119 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "MPL CEC4"; + compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "fdt"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "rootfs"; + reg = <0x600000 0x1fa00000>; + }; + }; + + rtc@10300 { + status = "disabled"; + }; + + sata@80000 { + nr-ports = <2>; + status = "okay"; + + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio0 7 1>; + }; + + user1o { + label = "user1:orange"; + gpios = <&gpio1 8 1>; + default-state = "on"; + }; + + user1g { + label = "user1:green"; + gpios = <&gpio1 9 1>; + default-state = "on"; + }; + + user0o { + label = "user0:orange"; + gpios = <&gpio1 12 1>; + default-state = "on"; + }; + + user0g { + label = "user0:green"; + gpios = <&gpio1 13 1>; + default-state = "on"; + }; + + misc { + label = "status:orange:misc"; + gpios = <&gpio1 14 1>; + default-state = "on"; + }; + + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi new file mode 100644 index 000000000000..9bc6785ad228 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -0,0 +1,63 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + i2c@11000 { + status = "okay"; + + eeprom@50 { + compatible = "at,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio1 0 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "ns2:red:fail"; + gpios = <&gpio0 12 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts new file mode 100644 index 000000000000..f2d36ecf36d8 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space v2"; + compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts new file mode 100644 index 000000000000..b02eb4ea1bb4 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Lite v2"; + compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-sata { + label = "ns2:blue:sata"; + gpios = <&gpio0 30 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts new file mode 100644 index 000000000000..bcec4d6cada7 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Max v2"; + compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 1500 15 + 1700 14 + 1800 13 + 2100 12 + 3100 11 + 3300 10 + 4300 9 + 5500 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts new file mode 100644 index 000000000000..b79f5eb25589 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Mini v2"; + compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 3000 15 + 3180 14 + 4140 13 + 4570 12 + 6760 11 + 7140 10 + 7980 9 + 9200 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts new file mode 100644 index 000000000000..5509f9659546 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "ZyXEL NSA310"; + compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + ocp@f1000000 { + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + i2c@11000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio1 14 0>; + }; + button@2 { + label = "Copy Button"; + linux,code = <133>; + gpios = <&gpio1 5 1>; + }; + button@3 { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio1 4 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 0>; + }; + red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 0>; + }; + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 0>; + }; + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 0>; + }; + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 0>; + }; + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 0>; + }; + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 0>; + }; + red-usb { + label = "nsa310:red:usb"; + gpios = <&gpio0 16 0>; + }; + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 0>; + }; + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts new file mode 100644 index 000000000000..9a2606c8b78f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -0,0 +1,39 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Plat'Home OpenBlocksA6"; + compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + serial@12100 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + chip-delay = <25>; + status = "okay"; + }; + + sata@80000 { + nr-ports = <1>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts new file mode 100644 index 000000000000..c0de5a7f660d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -0,0 +1,85 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Univeral Scientific Industrial Co. Topkick-1281P2"; + compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + }; + + partition@180000 { + label = "u-boot env"; + reg = <0x0180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "uInitrd"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0xe800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + disk { + label = "topkick:yellow:disk"; + gpios = <&gpio0 21 1>; + linux,default-trigger = "ide-disk"; + }; + system2 { + label = "topkick:red:system"; + gpios = <&gpio1 5 1>; + }; + system { + label = "topkick:blue:system"; + gpios = <&gpio1 6 1>; + default-state = "on"; + }; + wifi { + label = "topkick:green:wifi"; + gpios = <&gpio1 7 1>; + }; + wifi2 { + label = "topkick:yellow:wifi"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 581cb081cb0f..761c4b69b25b 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -65,5 +66,90 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; }; + + timer2: timer@4802a000 { + compatible = "ti,omap2-timer"; + reg = <0x4802a000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48078000 { + compatible = "ti,omap2-timer"; + reg = <0x48078000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@4807a000 { + compatible = "ti,omap2-timer"; + reg = <0x4807a000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@4807c000 { + compatible = "ti,omap2-timer"; + reg = <0x4807c000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4807e000 { + compatible = "ti,omap2-timer"; + reg = <0x4807e000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@48080000 { + compatible = "ti,omap2-timer"; + reg = <0x48080000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@48082000 { + compatible = "ti,omap2-timer"; + reg = <0x48082000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-dsp; + }; + + timer9: timer@48084000 { + compatible = "ti,omap2-timer"; + reg = <0x48084000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@4808a000 { + compatible = "ti,omap2-timer"; + reg = <0x4808a000 0x400>; + interrupts = <48>; + ti,hwmods = "timer12"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index bfd76b4a0ddc..af6560908905 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + counter32k: counter@48004000 { + compatible = "ti,omap-counter32k"; + reg = <0x48004000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2420_pmx: pinmux@48000030 { compatible = "ti,omap2420-padconf", "pinctrl-single"; reg = <0x48000030 0x0113>; @@ -30,7 +36,6 @@ interrupts = <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp1"; }; @@ -41,8 +46,15 @@ interrupts = <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp2"; }; + + timer1: timer@48028000 { + compatible = "ti,omap2-timer"; + reg = <0x48028000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 4565d9750f4d..c3924457c9b6 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + counter32k: counter@49020000 { + compatible = "ti,omap-counter32k"; + reg = <0x49020000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2430_pmx: pinmux@49002030 { compatible = "ti,omap2430-padconf", "pinctrl-single"; reg = <0x49002030 0x0154>; @@ -32,7 +38,6 @@ <60>, /* RX interrupt */ <61>; /* RX overflow interrupt */ interrupt-names = "common", "tx", "rx", "rx_overflow"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -45,7 +50,6 @@ <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -58,7 +62,6 @@ <89>, /* TX interrupt */ <90>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -71,7 +74,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -84,9 +86,16 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@49018000 { + compatible = "ti,omap2-timer"; + reg = <0x49018000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index c38cf76df81f..3705a81c1fc2 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -55,12 +55,6 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator-vsim { - compatible = "ti,twl4030-vsim"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - twl_audio: audio { compatible = "ti,twl4030-audio"; codec { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts new file mode 100644 index 000000000000..f624dc85d441 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 696e929d0304..1acc26148ffc 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap3430", "ti,omap3"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -60,6 +61,12 @@ ranges; ti,hwmods = "l3_main"; + counter32k: counter@48320000 { + compatible = "ti,omap-counter32k"; + reg = <0x48320000 0x20>; + ti,hwmods = "counter_32k"; + }; + intc: interrupt-controller@48200000 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -240,7 +247,6 @@ <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -255,7 +261,6 @@ <63>, /* RX interrupt */ <4>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <1280>; ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; @@ -270,7 +275,6 @@ <90>, /* RX interrupt */ <5>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; @@ -283,7 +287,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -296,9 +299,103 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@48318000 { + compatible = "ti,omap2-timer"; + reg = <0x48318000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@49032000 { + compatible = "ti,omap2-timer"; + reg = <0x49032000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@49034000 { + compatible = "ti,omap2-timer"; + reg = <0x49034000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@49036000 { + compatible = "ti,omap2-timer"; + reg = <0x49036000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@49038000 { + compatible = "ti,omap2-timer"; + reg = <0x49038000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4903a000 { + compatible = "ti,omap2-timer"; + reg = <0x4903a000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4903c000 { + compatible = "ti,omap2-timer"; + reg = <0x4903c000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4903e000 { + compatible = "ti,omap2-timer"; + reg = <0x4903e000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@49040000 { + compatible = "ti,omap2-timer"; + reg = <0x49040000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12"; + ti,timer-alwon; + ti,timer-secure; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts new file mode 100644 index 000000000000..75466d2abfb5 --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Pandaboard Rev A4+ have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-panda-es.dts index d4ba43a48d9b..73bc1a67e444 100644 --- a/arch/arm/boot/dts/omap4-pandaES.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -22,3 +22,12 @@ "AFML", "Line In", "AFMR", "Line In"; }; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index e8f927cbb376..4122efe31cfd 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -65,6 +65,8 @@ &twl6040_pins &mcpdm_pins &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins >; twl6040_pins: pinmux_twl6040_pins { @@ -92,6 +94,22 @@ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -184,3 +202,7 @@ &dmic { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts new file mode 100644 index 000000000000..b4a40ffbce31 --- /dev/null +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-sdp.dts" + +/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5b7e04fbff50..43e5258a9372 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -124,6 +124,8 @@ &dmic_pins &mcbsp1_pins &mcbsp2_pins + &dss_hdmi_pins + &tpd12s015_pins >; uart2_pins: pinmux_uart2_pins { @@ -194,6 +196,22 @@ 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -406,3 +424,7 @@ &mcbsp3 { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 6601e6af6092..6601e6af6092 100644 --- a/arch/arm/boot/dts/omap4-var_som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3883f94fdbd0..739bb79e410e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -95,6 +95,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap4_pmx_core: pinmux@4a100040 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a100040 0x0196>; @@ -340,7 +346,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -350,7 +355,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -361,7 +365,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -373,7 +376,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -385,7 +387,6 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -396,7 +397,6 @@ reg-names = "mpu"; interrupts = <0 16 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -431,12 +431,103 @@ hw-caps-temp-alert; }; - ocp2scp { + ocp2scp@4a0ad000 { compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; }; + + timer1: timer@4a318000 { + compatible = "ti,omap2-timer"; + reg = <0x4a318000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index c663eba73168..8722c15bbba2 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap5.dtsi" +/include/ "samsung_k3pe0e000b.dtsi" / { model = "TI OMAP5 EVM board"; @@ -15,7 +16,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ + reg = <0x80000000 0x80000000>; /* 2 GB */ }; vmmcsd_fixed: fixedregulator-mmcsd { @@ -140,3 +141,13 @@ &mcbsp3 { status = "disabled"; }; + +&emif1 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; + +&emif2 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 42c78beb4fdc..790bb2a4b343 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4ae04000 { + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; + }; + omap5_pmx_core: pinmux@4a002840 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; @@ -104,6 +110,8 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -113,6 +121,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -122,6 +132,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -131,6 +143,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -140,6 +154,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -149,6 +165,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -158,6 +176,8 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <0 35 0x4>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -167,6 +187,8 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <0 121 0x4>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -176,6 +198,8 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -183,6 +207,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -190,20 +216,26 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; }; - i2c4: i2c@4807A000 { + i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; }; - i2c5: i2c@4807C000 { + i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <0 60 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -211,42 +243,56 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; uart5: serial@48066000 { - compatible = "ti,omap5-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <0 105 0x4>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; uart6: serial@48068000 { - compatible = "ti,omap6-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <0 106 0x4>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -254,24 +300,32 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; @@ -287,7 +341,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -297,7 +350,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -308,7 +360,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -320,7 +371,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -332,9 +382,119 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; + + timer1: timer@4ae18000 { + compatible = "ti,omap2-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + emif1: emif@0x4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = <0 110 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@0x4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = <0 111 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts new file mode 100644 index 000000000000..5a3a58b7e18f --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "orion5x.dtsi" + +/ { + model = "LaCie Ethernet Disk mini V2"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power-on Switch"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio0 18 0>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "power:blue"; + gpios = <&gpio0 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi new file mode 100644 index 000000000000..8aad00f81ed9 --- /dev/null +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell Orion5x SoC"; + compatible = "marvell,orion5x"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>; + }; + + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf2200000 0xf2200000 0x0000800>; + #address-cells = <1>; + #size-cells = <1>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <6>, <7>, <8>, <9>; + }; + + serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clock-frequency = <100000>; + status = "disabled"; + }; + + crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>, + <0xf2200000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts new file mode 100644 index 000000000000..387fedb58988 --- /dev/null +++ b/arch/arm/boot/dts/pm9g45.dts @@ -0,0 +1,165 @@ +/* + * pm9g45.dts - Device Tree file for Ronetix pm9g45 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g45.dtsi" + +/ { + model = "Ronetix pm9g45"; + compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x70000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + + board { + pinctrl_board_nand: nand0-board { + atmel,pins = + <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + mmc { + pinctrl_board_mmc: mmc0-board { + atmel,pins = + <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + }; + }; + }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 6 0>; + }; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + pinctrl-0 = <&pinctrl_board_nand>; + + gpios = <&pioD 3 0 + &pioC 14 0 + 0 + >; + + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x1A0000>; + }; + + kernel@200000 { + label = "bareboxenv2"; + reg = <0x200000 0x300000>; + }; + + kernel@500000 { + label = "root"; + reg = <0x500000 0x400000>; + }; + + data@900000 { + label = "data"; + reg = <0x900000 0x8340000>; + }; + }; + + usb0: ohci@00700000 { + status = "okay"; + num-ports = <2>; + }; + + usb1: ehci@00800000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "led0"; + gpios = <&pioD 0 1>; + linux,default-trigger = "nand-disk"; + }; + + led1 { + label = "led1"; + gpios = <&pioD 31 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + right { + label = "SW4"; + gpios = <&pioE 7 1>; + linux,code = <106>; + }; + + up { + label = "SW3"; + gpios = <&pioE 8 1>; + linux,code = <103>; + }; + }; +}; diff --git a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi new file mode 100644 index 000000000000..9657a5cbc3ad --- /dev/null +++ b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi @@ -0,0 +1,67 @@ +/* + * Timings and Geometry for Samsung K3PE0E000B memory part + */ + +/ { + samsung_K3PE0E000B: lpddr2 { + compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4"; + density = <4096>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <533333333>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <266666666>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sh7377.dtsi b/arch/arm/boot/dts/sh7372-mackerel.dts index 767ee0796daa..286f0caef013 100644 --- a/arch/arm/boot/dts/sh7377.dtsi +++ b/arch/arm/boot/dts/sh7372-mackerel.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the sh7377 SoC + * Device Tree Source for the mackerel board * * Copyright (C) 2012 Renesas Solutions Corp. * @@ -8,14 +8,15 @@ * kind, whether express or implied. */ +/dts-v1/; /include/ "skeleton.dtsi" / { - compatible = "renesas,sh7377"; + model = "Mackerel (AP4 EVM 2nd)"; + compatible = "renesas,mackerel"; - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; + memory { + device_type = "memory"; + reg = <0x40000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 702c0baa6004..c6f85f0bc531 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -99,6 +99,33 @@ status = "okay"; }; + prcmu@80157000 { + thermal@801573c0 { + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; + + status = "okay"; + }; + }; + external-bus@50000000 { status = "okay"; @@ -183,5 +210,9 @@ reg = <0x33>; }; }; + + cpufreq-cooling { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index dd4358bc26e2..2e4c5727468e 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -181,6 +181,10 @@ status = "okay"; }; + gpio@d8400000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 419ea7413d23..7cd25eb4f8e0 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -70,6 +70,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1310-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -179,6 +185,27 @@ thermal@e07008c4 { st,thermal-flags = <0x7000>; }; + + gpiopinctrl: gpio@d8400000 { + compatible = "st,spear-plgpio"; + reg = <0xd8400000 0x1000>; + interrupts = <0 100 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 246>; + status = "disabled"; + + st-plgpio,ngpio = <246>; + st-plgpio,enb-reg = <0xd0>; + st-plgpio,wdata-reg = <0x90>; + st-plgpio,dir-reg = <0xb0>; + st-plgpio,ie-reg = <0x30>; + st-plgpio,rdata-reg = <0x70>; + st-plgpio,mis-reg = <0x10>; + st-plgpio,eit-reg = <0x50>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c9a54e06fb68..045f7123ffac 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -193,6 +193,10 @@ status = "okay"; }; + gpio@e2800000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index d71fe2a68f09..6c09eb0a1b2b 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -24,6 +24,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1340-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -51,6 +57,26 @@ thermal@e07008c4 { st,thermal-flags = <0x2a00>; }; + + gpiopinctrl: gpio@e2800000 { + compatible = "st,spear-plgpio"; + reg = <0xe2800000 0x1000>; + interrupts = <0 107 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 252>; + status = "disabled"; + + st-plgpio,ngpio = <250>; + st-plgpio,wdata-reg = <0x40>; + st-plgpio,dir-reg = <0x00>; + st-plgpio,ie-reg = <0x80>; + st-plgpio,rdata-reg = <0x20>; + st-plgpio,mis-reg = <0xa0>; + st-plgpio,eit-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 62fc4fb3e5f9..930303e48df9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -22,9 +22,10 @@ 0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b4000000 { + pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; + #gpio-range-cells = <2>; }; fsmc: flash@44000000 { @@ -75,6 +76,25 @@ reg = <0xb2200000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b4000000 { + compatible = "st,spear-plgpio"; + reg = <0xb4000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x10>; + st-plgpio,wdata-reg = <0x20>; + st-plgpio,dir-reg = <0x30>; + st-plgpio,ie-reg = <0x50>; + st-plgpio,rdata-reg = <0x40>; + st-plgpio,mis-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 082328bd64ab..ad4bfc68ee05 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -164,6 +164,10 @@ status = "okay"; }; + gpio@b3000000 { + status = "okay"; + }; + i2c0: i2c@d0180000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 1f49d69595a0..67d7ada71275 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -21,9 +21,10 @@ ranges = <0x40000000 0x40000000 0x80000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b3000000 { + pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; + #gpio-range-cells = <2>; }; clcd@90000000 { @@ -90,6 +91,26 @@ reg = <0xa4000000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b3000000 { + compatible = "st,spear-plgpio"; + reg = <0xb3000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x24>; + st-plgpio,wdata-reg = <0x34>; + st-plgpio,dir-reg = <0x44>; + st-plgpio,ie-reg = <0x64>; + st-plgpio,rdata-reg = <0x54>; + st-plgpio,mis-reg = <0x84>; + st-plgpio,eit-reg = <0x94>; + }; }; }; }; diff --git a/arch/arm/boot/dts/sun4i-cubieboard.dts b/arch/arm/boot/dts/sun4i-cubieboard.dts new file mode 100644 index 000000000000..f4ca126ad994 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-cubieboard.dts @@ -0,0 +1,38 @@ +/* + * Copyright 2012 Stefan Roese + * Stefan Roese <sr@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i.dtsi" + +/ { + model = "Cubietech Cubieboard"; + compatible = "cubietech,cubieboard", "allwinner,sun4i"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: uart@01c28000 { + status = "okay"; + }; + + uart1: uart@01c28400 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i.dtsi b/arch/arm/boot/dts/sun4i.dtsi new file mode 100644 index 000000000000..e61fdd47bd01 --- /dev/null +++ b/arch/arm/boot/dts/sun4i.dtsi @@ -0,0 +1,19 @@ +/* + * Copyright 2012 Stefan Roese + * Stefan Roese <sr@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "sunxi.dtsi" + +/ { + memory { + reg = <0x40000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts new file mode 100644 index 000000000000..d6ff889a5d87 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i.dtsi" + +/ { + model = "Olimex A13-Olinuxino"; + compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart1: uart@01c28400 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi new file mode 100644 index 000000000000..59a2d265a98e --- /dev/null +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -0,0 +1,20 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "sunxi.dtsi" + +/ { + memory { + reg = <0x40000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi new file mode 100644 index 000000000000..8bbc2bfef221 --- /dev/null +++ b/arch/arm/boot/dts/sunxi.dtsi @@ -0,0 +1,80 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sunxi-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sunxi-wdt"; + reg = <0x01c20c90 0x10>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sunxi-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: uart@01c28000 { + compatible = "ns8250"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + clock-frequency = <24000000>; + status = "disabled"; + }; + + uart1: uart@01c28400 { + compatible = "ns8250"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + clock-frequency = <24000000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index c3ef1ad26b6a..74b8a47adf91 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -297,131 +297,98 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "vdd_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "vdd_sm1,vdd_cpu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "vdd_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; }; - regulator@4 { - reg = <4>; - regulator-compatible = "ldo0"; + ldo0 { regulator-name = "vdd_ldo0,vddio_pex_clk"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "vdd_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "vdd_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "vdd_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "vdd_ldo6,avdd_vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "vdd_rtc_out,vdd_cell"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index ddf287f52d49..6a93d1404c76 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -291,37 +291,26 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "+1.2vs_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "+1.0vs_sm1,vdd_cpu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "+3.7vs_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; @@ -330,53 +319,41 @@ /* LDO0 is not connected to anything */ - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "+1.1vs_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "+1.2vs_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "+3.3vs_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "+2.85vs_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { /* * Research indicates this should be * 1.8v; other boards that use this @@ -390,34 +367,26 @@ regulator-max-microvolt = <1800000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "+3.3vs_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "+2.85vs_ldo9,vdd_ddr_rx"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "+3.3vs_rtc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index f0ba901676ac..e58a0e60f711 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -395,37 +395,26 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "vdd_sm0,vdd_core"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "vdd_sm1,vdd_cpu"; regulator-min-microvolt = <1125000>; regulator-max-microvolt = <1125000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "vdd_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; @@ -434,86 +423,66 @@ /* LDO0 is not connected to anything */ - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "vdd_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "vdd_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "vdd_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "vdd_rtc_out,vdd_cell"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -523,12 +492,12 @@ }; temperature-sensor@4c { - compatible = "nct1008"; + compatible = "onnn,nct1008"; reg = <0x4c>; }; magnetometer@c { - compatible = "ak8975"; + compatible = "ak,ak8975"; reg = <0xc>; interrupt-parent = <&gpio>; interrupts = <109 0x04>; /* gpio PN5 */ diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index f18cec9f6a77..5b3d8b157b33 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -271,97 +271,72 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "vdd_sys_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "vdd_sys_sm1,vdd_cpu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "vdd_sys_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; }; - regulator@4 { - reg = <4>; - regulator-compatible = "ldo0"; + ldo0 { regulator-name = "vdd_ldo0,vddio_pex_clk"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "vdd_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "vdd_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "vdd_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "vdd_ldo6,avdd_vdac"; /* * According to the Tegra 2 Automotive @@ -373,25 +348,19 @@ regulator-max-microvolt = <2850000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; /* * According to the Tegra 2 Automotive @@ -404,9 +373,7 @@ regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "vdd_rtc_out"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 3e5952fcfbc5..86854f1abd58 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -311,37 +311,26 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "vdd_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "vdd_sm1,vdd_cpu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "vdd_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; @@ -350,86 +339,66 @@ /* LDO0 is not connected to anything */ - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "vdd_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "vdd_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "vdd_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "vdd_ldo6,avdd_vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "vdd_rtc_out,vdd_cell"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index c636d002d6d8..94a71c91beb5 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -295,243 +295,182 @@ in20-supply = <&mbatt_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - mbatt_reg: regulator@0 { - reg = <0>; - regulator-compatible = "mbatt"; + mbatt_reg: mbatt { regulator-name = "vbat_pmu"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sd1"; + sd1 { regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sd2"; + sd2 { regulator-name = "nvvdd_sv2,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - nvvdd_sv3_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sd3"; + nvvdd_sv3_reg: sd3 { regulator-name = "nvvdd_sv3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@4 { - reg = <4>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@5 { - reg = <5>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "nvvdd_ldo2,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "nvvdd_ldo3,vcom_1v8b"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "nvvdd_ldo4,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "nvvdd_ldo7,avddio_audio"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "nvvdd_ldo9,avdd_cam*"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo10"; + ldo10 { regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo11"; + ldo11 { regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@15 { - reg = <15>; - regulator-compatible = "ldo12"; + ldo12 { regulator-name = "nvvdd_ldo12,vddio_sdio"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - regulator@16 { - reg = <16>; - regulator-compatible = "ldo13"; + ldo13 { regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - regulator@17 { - reg = <17>; - regulator-compatible = "ldo14"; + ldo14 { regulator-name = "nvvdd_ldo14,avdd_vdac"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - regulator@18 { - reg = <18>; - regulator-compatible = "ldo15"; + ldo15 { regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@19 { - reg = <19>; - regulator-compatible = "ldo16"; + ldo16 { regulator-name = "nvvdd_ldo16,vdd_dbrtr"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; }; - regulator@20 { - reg = <20>; - regulator-compatible = "ldo17"; + ldo17 { regulator-name = "nvvdd_ldo17,vddio_mipi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@21 { - reg = <21>; - regulator-compatible = "ldo18"; + ldo18 { regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@22 { - reg = <22>; - regulator-compatible = "ldo19"; + ldo19 { regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - regulator@23 { - reg = <23>; - regulator-compatible = "ldo20"; + ldo20 { regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@24 { - reg = <24>; - regulator-compatible = "out5v"; + out5v { regulator-name = "usb0_vbus_reg"; }; - regulator@25 { - reg = <25>; - regulator-compatible = "out33v"; + out33v { regulator-name = "pmu_out3v3"; }; - regulator@26 { - reg = <26>; - regulator-compatible = "bbat"; + bbat { regulator-name = "pmu_bbat"; regulator-min-microvolt = <2400000>; regulator-max-microvolt = <2400000>; regulator-always-on; }; - regulator@27 { - reg = <27>; - regulator-compatible = "sdby"; + sdby { regulator-name = "vdd_aon"; regulator-always-on; }; - regulator@28 { - reg = <28>; - regulator-compatible = "vrtc"; + vrtc { regulator-name = "vrtc,pmu_vccadc"; regulator-always-on; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index f3a09d0d45bc..f40cfbaa7c7e 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,15 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <5 5 2>; + arm,tag-latency = <4 4 2>; + cache-unified; + cache-level = <2>; + }; + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index d10c9c5a3606..b1271a894327 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -171,56 +171,41 @@ vccio-supply = <&vdd_ac_bat_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - vdd1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "vdd1"; + vdd1_reg: vdd1 { regulator-name = "vddio_ddr_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - vdd2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "vdd2"; + vdd2_reg: vdd2 { regulator-name = "vdd_1v5_gen"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; - vddctrl_reg: regulator@2 { - reg = <2>; - regulator-compatible = "vddctrl"; + vddctrl_reg: vddctrl { regulator-name = "vdd_cpu,vdd_sys"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - vio_reg: regulator@3 { - reg = <3>; - regulator-compatible = "vio"; + vio_reg: vio { regulator-name = "vdd_1v8_gen"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo1_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo1"; + ldo1_reg: ldo1 { regulator-name = "vdd_pexa,vdd_pexb"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - ldo2_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo2"; + ldo2_reg: ldo2 { regulator-name = "vdd_sata,avdd_plle"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -228,44 +213,34 @@ /* LDO3 is not connected to anything */ - ldo4_reg: regulator@7 { - reg = <7>; - regulator-compatible = "ldo4"; + ldo4_reg: ldo4 { regulator-name = "vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - ldo5_reg: regulator@8 { - reg = <8>; - regulator-compatible = "ldo5"; + ldo5_reg: ldo5 { regulator-name = "vddio_sdmmc,avdd_vdac"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - ldo6_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo6"; + ldo6_reg: ldo6 { regulator-name = "avdd_dsi_csi,pwrdet_mipi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo7_reg: regulator@10 { - reg = <10>; - regulator-compatible = "ldo7"; + ldo7_reg: ldo7 { regulator-name = "vdd_pllm,x,u,a_p_c_s"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - ldo8_reg: regulator@11 { - reg = <11>; - regulator-compatible = "ldo8"; + ldo8_reg: ldo8 { regulator-name = "vdd_ddr_hs"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index df7f2270fc91..fed8dca1692d 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,15 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <6 6 2>; + arm,tag-latency = <5 5 2>; + cache-unified; + cache-level = <2>; + }; + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ff000172c93c..63411b036932 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -37,6 +37,24 @@ regulator-max-microvolt = <3150000>; }; + vusb1v5: regulator-vusb1v5 { + compatible = "ti,twl4030-vusb1v5"; + }; + + vusb1v8: regulator-vusb1v8 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + + vsim: regulator-vsim { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + twl_gpio: gpio { compatible = "ti,twl4030-gpio"; gpio-controller; @@ -44,4 +62,13 @@ interrupt-controller; #interrupt-cells = <1>; }; + + twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = <10>, <4>; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; + }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 123e2c40218a..9996cfc5ee80 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -86,4 +86,9 @@ clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index d8a827bd2bf3..ac870fb3fa0d 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -17,17 +17,16 @@ * CHANGES TO vexpress-v2m.dtsi! */ -/ { - aliases { - arm,v2m_timer = &v2m_timer01; - }; - motherboard { - compatible = "simple-bus"; + model = "V2M-P1"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; #interrupt-cells = <1>; + ranges; flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; @@ -72,14 +71,20 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - sysreg@010000 { + v2m_sysreg: sysreg@010000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; }; - sysctl@020000 { + v2m_sysctl: sysctl@020000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; }; /* PCI-E I2C bus */ @@ -100,66 +105,92 @@ compatible = "arm,pl041", "arm,primecell"; reg = <0x040000 0x1000>; interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; mmci@050000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@060000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x060000 0x1000>; interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@070000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x070000 0x1000>; interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; v2m_serial0: uart@090000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial1: uart@0a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial2: uart@0b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial3: uart@0c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; wdt@0f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x1000>; interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; }; v2m_timer01: timer@110000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x110000 0x1000>; interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; /* DVI I2C bus */ @@ -185,6 +216,8 @@ compatible = "arm,pl031", "arm,primecell"; reg = <0x170000 0x1000>; interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; compact-flash@1a0000 { @@ -198,6 +231,8 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "clcdclk", "apb_pclk"; }; }; @@ -208,5 +243,98 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: osc@2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt@0 { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp@0 { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; }; -}; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index dba53fd026bb..f1420368355b 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -17,16 +17,15 @@ * CHANGES TO vexpress-v2m-rs1.dtsi! */ -/ { - aliases { - arm,v2m_timer = &v2m_timer01; - }; - motherboard { - compatible = "simple-bus"; + model = "V2M-P1"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; #interrupt-cells = <1>; + ranges; flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; @@ -71,14 +70,20 @@ #size-cells = <1>; ranges = <0 7 0 0x20000>; - sysreg@00000 { + v2m_sysreg: sysreg@00000 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; + gpio-controller; + #gpio-cells = <2>; }; - sysctl@01000 { + v2m_sysctl: sysctl@01000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x01000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; }; /* PCI-E I2C bus */ @@ -99,66 +104,92 @@ compatible = "arm,pl041", "arm,primecell"; reg = <0x04000 0x1000>; interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; mmci@05000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@06000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x06000 0x1000>; interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@07000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x07000 0x1000>; interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; v2m_serial0: uart@09000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x09000 0x1000>; interrupts = <5>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial1: uart@0a000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a000 0x1000>; interrupts = <6>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial2: uart@0b000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b000 0x1000>; interrupts = <7>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; v2m_serial3: uart@0c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c000 0x1000>; interrupts = <8>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; }; wdt@0f000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f000 0x1000>; interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; }; v2m_timer01: timer@11000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x11000 0x1000>; interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; v2m_timer23: timer@12000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x12000 0x1000>; interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; /* DVI I2C bus */ @@ -184,6 +215,8 @@ compatible = "arm,pl031", "arm,primecell"; reg = <0x17000 0x1000>; interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; compact-flash@1a000 { @@ -197,6 +230,8 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "clcdclk", "apb_pclk"; }; }; @@ -207,5 +242,98 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + v2m_oscclk2: osc@2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; + + volt@0 { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; + + temp@0 { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; }; -}; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index d12b34ca0568..a3d37ec2655d 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA15"; arm,hbi = <0x237>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <2>; @@ -54,17 +55,24 @@ compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0 0x2b0a0000 0 0x1000>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; wdt@2b060000 { compatible = "arm,sp805", "arm,primecell"; + status = "disabled"; reg = <0 0x2b060000 0 0x1000>; interrupts = <98>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; gic: interrupt-controller@2c001000 { @@ -84,6 +92,8 @@ reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; dma@7ffb0000 { @@ -94,6 +104,8 @@ <0 89 4>, <0 90 4>, <0 91 4>; + clocks = <&oscclk7>; + clock-names = "apb_pclk"; }; timer { @@ -110,7 +122,109 @@ <0 69 4>; }; - motherboard { + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* CPU PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <50000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + osc@4 { + /* Multiplexed AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + oscclk5: osc@5 { + /* HDLCD PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + smbclk: osc@6 { + /* SMB clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 6>; + freq-range = <20000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk6"; + }; + + oscclk7: osc@7 { + /* SYS PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 7>; + freq-range = <20000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk7"; + }; + + osc@8 { + /* DDR2 PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 8>; + freq-range = <40000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk8"; + }; + + volt@0 { + /* CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "Cores"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "Cores"; + }; + + amp@0 { + /* Total current for the two cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "Cores"; + }; + + temp@0 { + /* DCC internal temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + + power@0 { + /* Total power */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "Cores"; + }; + + energy@0 { + /* Total energy */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>; + label = "Cores"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0 0x08000000 0x04000000>, <1 0 0 0x14000000 0x04000000>, <2 0 0 0x18000000 0x04000000>, @@ -118,6 +232,7 @@ <4 0 0 0x0c000000 0x04000000>, <5 0 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -162,7 +277,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 4890a81c5467..1fc405a9ecfb 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA15_CA7"; arm,hbi = <0x249>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <2>; @@ -74,17 +75,23 @@ compatible = "arm,sp805", "arm,primecell"; reg = <0 0x2a490000 0 0x1000>; interrupts = <98>; + clocks = <&oscclk6a>, <&oscclk6a>; + clock-names = "wdogclk", "apb_pclk"; }; hdlcd@2b000000 { compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0 0x2b0a0000 0 0x1000>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; gic: interrupt-controller@2c001000 { @@ -104,6 +111,8 @@ reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; dma@7ff00000 { @@ -114,6 +123,8 @@ <0 89 4>, <0 90 4>, <0 91 4>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; }; timer { @@ -130,7 +141,175 @@ <0 69 4>; }; - motherboard { + oscclk6a: oscclk6a { + /* Reference 24MHz clock */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "oscclk6a"; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* A15 PLL 0 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + osc@1 { + /* A15 PLL 1 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk1"; + }; + + osc@2 { + /* A7 PLL 0 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk2"; + }; + + osc@3 { + /* A7 PLL 1 reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 3>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk3"; + }; + + osc@4 { + /* External AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + oscclk5: osc@5 { + /* HDLCD PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + smbclk: osc@6 { + /* Static memory controller clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 6>; + freq-range = <20000000 40000000>; + #clock-cells = <0>; + clock-output-names = "oscclk6"; + }; + + osc@7 { + /* SYS PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 7>; + freq-range = <17000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk7"; + }; + + osc@8 { + /* DDR2 PLL reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 8>; + freq-range = <20000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk8"; + }; + + volt@0 { + /* A15 CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "A15 Vcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "A15 Vcore"; + }; + + volt@1 { + /* A7 CPU core voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 1>; + regulator-name = "A7 Vcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + label = "A7 Vcore"; + }; + + amp@0 { + /* Total current for the two A15 cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "A15 Icore"; + }; + + amp@1 { + /* Total current for the three A7 cores */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 1>; + label = "A7 Icore"; + }; + + temp@0 { + /* DCC internal temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + + power@0 { + /* Total power for the two A15 cores */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "A15 Pcore"; + }; + power@1 { + /* Total power for the three A7 cores */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 1>; + label = "A7 Pcore"; + }; + + energy@0 { + /* Total energy for the two A15 cores */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>; + label = "A15 Jcore"; + }; + + energy@2 { + /* Total energy for the three A7 cores */ + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 2>; + label = "A7 Jcore"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0 0x08000000 0x04000000>, <1 0 0 0x14000000 0x04000000>, <2 0 0 0x18000000 0x04000000>, @@ -138,6 +317,7 @@ <4 0 0 0x0c000000 0x04000000>, <5 0 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -182,7 +362,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 18917a0f8604..6328cbc71d30 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA5s"; arm,hbi = <0x225>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <1>; @@ -56,11 +57,15 @@ compatible = "arm,hdlcd"; reg = <0x2a110000 0x1000>; interrupts = <0 85 4>; + clocks = <&oscclk3>; + clock-names = "pxlclk"; }; memory-controller@2a150000 { compatible = "arm,pl341", "arm,primecell"; reg = <0x2a150000 0x1000>; + clocks = <&oscclk1>; + clock-names = "apb_pclk"; }; memory-controller@2a190000 { @@ -68,6 +73,8 @@ reg = <0x2a190000 0x1000>; interrupts = <0 86 4>, <0 87 4>; + clocks = <&oscclk1>; + clock-names = "apb_pclk"; }; scu@2c000000 { @@ -109,7 +116,77 @@ <0 69 4>; }; - motherboard { + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* CPU and internal AXI reference clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <50000000 100000000>; + #clock-cells = <0>; + clock-output-names = "oscclk0"; + }; + + oscclk1: osc@1 { + /* Multiplexed AXI master clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <5000000 50000000>; + #clock-cells = <0>; + clock-output-names = "oscclk1"; + }; + + osc@2 { + /* DDR2 */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <80000000 120000000>; + #clock-cells = <0>; + clock-output-names = "oscclk2"; + }; + + oscclk3: osc@3 { + /* HDLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 3>; + freq-range = <23750000 165000000>; + #clock-cells = <0>; + clock-output-names = "oscclk3"; + }; + + osc@4 { + /* Test chip gate configuration */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <80000000 80000000>; + #clock-cells = <0>; + clock-output-names = "oscclk4"; + }; + + smbclk: osc@5 { + /* SMB clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 5>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "oscclk5"; + }; + + temp@0 { + /* DCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "DCC"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0x08000000 0x04000000>, <1 0 0x14000000 0x04000000>, <2 0 0x18000000 0x04000000>, @@ -117,6 +194,7 @@ <4 0 0x0c000000 0x04000000>, <5 0 0x10000000 0x04000000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -161,7 +239,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m-rs1.dtsi" }; }; - -/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 3f0c736d31d6..1420bb14d95c 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -12,6 +12,7 @@ / { model = "V2P-CA9"; arm,hbi = <0x191>; + arm,vexpress,site = <0xf>; compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <1>; @@ -70,11 +71,15 @@ compatible = "arm,pl111", "arm,primecell"; reg = <0x10020000 0x1000>; interrupts = <0 44 4>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; }; memory-controller@100e0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0x100e0000 0x1000>; + clocks = <&oscclk2>; + clock-names = "apb_pclk"; }; memory-controller@100e1000 { @@ -82,6 +87,8 @@ reg = <0x100e1000 0x1000>; interrupts = <0 45 4>, <0 46 4>; + clocks = <&oscclk2>; + clock-names = "apb_pclk"; }; timer@100e4000 { @@ -89,12 +96,16 @@ reg = <0x100e4000 0x1000>; interrupts = <0 48 4>, <0 49 4>; + clocks = <&oscclk2>, <&oscclk2>; + clock-names = "timclk", "apb_pclk"; }; watchdog@100e5000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x100e5000 0x1000>; interrupts = <0 51 4>; + clocks = <&oscclk2>, <&oscclk2>; + clock-names = "wdogclk", "apb_pclk"; }; scu@1e000000 { @@ -140,13 +151,132 @@ <0 63 4>; }; - motherboard { + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + + volt@0 { + /* Test Chip internal logic voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VD10"; + regulator-always-on; + label = "VD10"; + }; + + volt@1 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 1>; + regulator-name = "VD10_S2"; + regulator-always-on; + label = "VD10_S2"; + }; + + volt@2 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 2>; + regulator-name = "VD10_S3"; + regulator-always-on; + label = "VD10_S3"; + }; + + volt@3 { + /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 3>; + regulator-name = "VCC1V8"; + regulator-always-on; + label = "VCC1V8"; + }; + + volt@4 { + /* DDR2 SDRAM VTT termination voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 4>; + regulator-name = "DDR2VTT"; + regulator-always-on; + label = "DDR2VTT"; + }; + + volt@5 { + /* Local board supply for miscellaneous logic external to the Test Chip */ + arm,vexpress-sysreg,func = <2 5>; + compatible = "arm,vexpress-volt"; + regulator-name = "VCC3V3"; + regulator-always-on; + label = "VCC3V3"; + }; + + amp@0 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 0>; + label = "VD10_S2"; + }; + + amp@1 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-amp"; + arm,vexpress-sysreg,func = <3 1>; + label = "VD10_S3"; + }; + + power@0 { + /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 0>; + label = "PVD10_S2"; + }; + + power@1 { + /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ + compatible = "arm,vexpress-power"; + arm,vexpress-sysreg,func = <12 1>; + label = "PVD10_S3"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; ranges = <0 0 0x40000000 0x04000000>, <1 0 0x44000000 0x04000000>, <2 0 0x48000000 0x04000000>, <3 0 0x4c000000 0x04000000>, <7 0 0x10000000 0x00020000>; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, <0 0 1 &gic 0 1 4>, @@ -191,7 +321,7 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; + + /include/ "vexpress-v2m.dtsi" }; }; - -/include/ "vexpress-v2m.dtsi" diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts index 37ca192fb193..574bc044f572 100644 --- a/arch/arm/boot/dts/zynq-ep107.dts +++ b/arch/arm/boot/dts/zynq-ep107.dts @@ -36,16 +36,27 @@ ranges; intc: interrupt-controller@f8f01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; interrupt-controller; - compatible = "arm,gic"; - reg = <0xF8F01000 0x1000>; - #interrupt-cells = <2>; + reg = <0xF8F01000 0x1000>, + <0xF8F00100 0x100>; + }; + + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xF8F02000 0x1000>; + arm,data-latency = <2 3 2>; + arm,tag-latency = <2 3 2>; + cache-unified; + cache-level = <2>; }; uart0: uart@e0000000 { compatible = "xlnx,xuartps"; reg = <0xE0000000 0x1000>; - interrupts = <59 0>; + interrupts = <0 27 4>; clock = <50000000>; }; }; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index aa5269984187..36ae03a3f5d1 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -70,6 +70,14 @@ struct gic_chip_data { static DEFINE_RAW_SPINLOCK(irq_controller_lock); /* + * The GIC mapping of CPU interfaces does not necessarily match + * the logical CPU numbering. Let's use a mapping as returned + * by the GIC itself. + */ +#define NR_GIC_CPU_IF 8 +static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly; + +/* * Supported arch specific GIC irq extension. * Default make them NULL. */ @@ -238,11 +246,11 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); u32 val, mask, bit; - if (cpu >= 8 || cpu >= nr_cpu_ids) + if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL; mask = 0xff << shift; - bit = 1 << (cpu_logical_map(cpu) + shift); + bit = gic_cpu_map[cpu] << shift; raw_spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; @@ -349,11 +357,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic) u32 cpumask; unsigned int gic_irqs = gic->gic_irqs; void __iomem *base = gic_data_dist_base(gic); - u32 cpu = cpu_logical_map(smp_processor_id()); - - cpumask = 1 << cpu; - cpumask |= cpumask << 8; - cpumask |= cpumask << 16; writel_relaxed(0, base + GIC_DIST_CTRL); @@ -366,6 +369,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) /* * Set all global interrupts to this CPU only. */ + cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0); for (i = 32; i < gic_irqs; i += 4) writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); @@ -389,9 +393,25 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) { void __iomem *dist_base = gic_data_dist_base(gic); void __iomem *base = gic_data_cpu_base(gic); + unsigned int cpu_mask, cpu = smp_processor_id(); int i; /* + * Get what the GIC says our CPU mask is. + */ + BUG_ON(cpu >= NR_GIC_CPU_IF); + cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0); + gic_cpu_map[cpu] = cpu_mask; + + /* + * Clear our mask from the other map entries in case they're + * still undefined. + */ + for (i = 0; i < NR_GIC_CPU_IF; i++) + if (i != cpu) + gic_cpu_map[i] &= ~cpu_mask; + + /* * Deal with the banked PPI and SGI interrupts - disable all * PPI interrupts, ensure all SGI interrupts are enabled. */ @@ -646,7 +666,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, { irq_hw_number_t hwirq_base; struct gic_chip_data *gic; - int gic_irqs, irq_base; + int gic_irqs, irq_base, i; BUG_ON(gic_nr >= MAX_GIC_NR); @@ -683,6 +703,13 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, } /* + * Initialize the CPU interface map to all CPUs. + * It will be refined as each CPU probes its ID. + */ + for (i = 0; i < NR_GIC_CPU_IF; i++) + gic_cpu_map[i] = 0xff; + + /* * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ @@ -737,7 +764,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) /* Convert our logical CPU mask into a physical one. */ for_each_cpu(cpu, mask) - map |= 1 << cpu_logical_map(cpu); + map |= gic_cpu_map[cpu]; /* * Ensure that stores to Normal memory are visible to the diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index df13a3ffff35..9d2d3ba339ff 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = { .set_mode = sp804_set_mode, .set_next_event = sp804_set_next_event, .rating = 300, - .cpumask = cpu_all_mask, }; static struct irqaction sp804_timer_irq = { @@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); evt->name = name; evt->irq = irq; + evt->cpumask = cpu_possible_mask; setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index e0d538803cc3..e4df17ca90c7 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -218,7 +218,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq, v->resume_sources = resume_sources; v->irq = irq; vic_id++; - v->domain = irq_domain_add_legacy(node, fls(valid_sources), irq, 0, + v->domain = irq_domain_add_simple(node, fls(valid_sources), irq, &vic_irqdomain_ops, v); } @@ -350,7 +350,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, vic_register(base, irq_start, vic_sources, 0, node); } -void __init __vic_init(void __iomem *base, unsigned int irq_start, +void __init __vic_init(void __iomem *base, int irq_start, u32 vic_sources, u32 resume_sources, struct device_node *node) { @@ -407,7 +407,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, int __init vic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *regs; - int irq_base; if (WARN(parent, "non-root VICs are not supported")) return -EINVAL; @@ -416,18 +415,12 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) if (WARN_ON(!regs)) return -EIO; - irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); - if (WARN_ON(irq_base < 0)) - goto out_unmap; - - __vic_init(regs, irq_base, ~0, ~0, node); + /* + * Passing -1 as first IRQ makes the simple domain allocate descriptors + */ + __vic_init(regs, -1, ~0, ~0, node); return 0; - - out_unmap: - iounmap(regs); - - return -EIO; } #endif /* CONFIG OF */ diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig deleted file mode 100644 index c285a9d777d9..000000000000 --- a/arch/arm/configs/afeb9260_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_AFEB9260=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_EEPROM_AT24=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DEBUG=y -CONFIG_RTC_DRV_FM3130=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig index 2eef85e3c9b9..66894f736d04 100644 --- a/arch/arm/configs/ap4evb_defconfig +++ b/arch/arm/configs/ap4evb_defconfig @@ -46,7 +46,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index f78d259f8d23..2e1a82577207 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_IPC_NS is not set # CONFIG_PID_NS is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -20,7 +21,7 @@ CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set CONFIG_ARM_THUMB=y CONFIG_CPU_BPREDICT_DISABLE=y -# CONFIG_CACHE_L2X0 is not set +CONFIG_CACHE_L2X0=y CONFIG_ARM_ERRATA_430973=y CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_460075=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 67bc571ed0c3..b175577d7abb 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -111,6 +111,7 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 505b3765f87e..0ea5d2c97fc4 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -75,7 +75,7 @@ CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig index 1e8712ef062e..c87beb973b37 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -125,7 +125,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index d2050cada82d..c5212f43eee6 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -133,7 +133,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_SDIO_UART=m diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index e1b0e80b54a5..3b1881033ad8 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -96,7 +96,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 7aea70253c63..74e27f0ff6ad 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -66,8 +66,6 @@ CONFIG_TTY_PRINTK=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set -# CONFIG_PROC_FS is not set -# CONFIG_SYSFS is not set # CONFIG_MISC_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig new file mode 100644 index 000000000000..e3bf2d65618e --- /dev/null +++ b/arch/arm/configs/bcm_defconfig @@ -0,0 +1,114 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_CGROUPS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_SCHED=y +CONFIG_BLK_CGROUP=y +CONFIG_NAMESPACES=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y +CONFIG_ARCH_BCM=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_COMPACTION is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M" +CONFIG_CPU_IDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_BLK_DEV is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110 +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_XZ_DEC=y +CONFIG_AVERAGE=y diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig deleted file mode 100644 index 14579711d8fc..000000000000 --- a/arch/arm/configs/cam60_defconfig +++ /dev/null @@ -1,173 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_CAM60=y -CONFIG_ZBOOT_ROM_BSS=0x20004000 -CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_MISC=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_CFG80211=m -CONFIG_MAC80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_TEST=m -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig new file mode 100644 index 000000000000..1cd94c36321f --- /dev/null +++ b/arch/arm/configs/clps711x_defconfig @@ -0,0 +1,90 @@ +CONFIG_KERNEL_LZMA=y +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_RD_LZMA=y +CONFIG_EMBEDDED=y +CONFIG_SLOB=y +CONFIG_JUMP_LABEL=y +# CONFIG_LBDAF is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_CLPS711X=y +CONFIG_ARCH_AUTCPU12=y +CONFIG_ARCH_CDB89712=y +CONFIG_ARCH_CLEP7312=y +CONFIG_ARCH_EDB7211=y +CONFIG_ARCH_P720T=y +CONFIG_ARCH_FORTUNET=y +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_COREDUMP is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_IRDA=y +CONFIG_IRTTY_SIR=y +CONFIG_EP7211_DONGLE=y +# CONFIG_WIRELESS is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_AUTCPU12=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPIO=y +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_CLPS711X_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_SPI=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CLPS711X=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_PLATFORM=y +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 4b8a25d9e686..1fd1d1de3220 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -218,7 +218,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig deleted file mode 100644 index 921480c23b98..000000000000 --- a/arch/arm/configs/cpu9260_defconfig +++ /dev/null @@ -1,116 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_CPU9260=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig deleted file mode 100644 index ea116cbdffa1..000000000000 --- a/arch/arm/configs/cpu9g20_defconfig +++ /dev/null @@ -1,116 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_CPU9G20=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 88ccde058ba4..f29223954af8 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -17,6 +17,7 @@ CONFIG_MODVERSIONS=y CONFIG_ARCH_DAVINCI=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y +CONFIG_MACH_DA8XX_DT=y CONFIG_MACH_MITYOMAPL138=y CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_DAVINCI_RESET_CLOCKS=y @@ -26,6 +27,7 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_LEDS=y +CONFIG_USE_OF=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_FREQ=y @@ -75,6 +77,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 67b5abb6f857..4ea7c95719d2 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -144,7 +144,7 @@ CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_USB_CDC_COMPOSITE=m diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 40db34cf2771..0b7ee92c5713 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -8,11 +8,19 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y +CONFIG_MACH_CM_A510=y +CONFIG_MACH_DOVE_DT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_HIGHMEM=y +CONFIG_USE_OF=y +CONFIG_ATAGS=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -62,6 +70,9 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -74,6 +85,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_DOVE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y @@ -122,6 +145,7 @@ CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig deleted file mode 100644 index d52ded350a12..000000000000 --- a/arch/arm/configs/edb7211_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_ARCH_CLPS711X=y -CONFIG_ARCH_EDB7211=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -# CONFIG_INPUT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_VT is not set -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_MINIX_FS=y -CONFIG_PARTITION_ADVANCED=y -# CONFIG_MSDOS_PARTITION is not set -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig deleted file mode 100644 index 840fced7529f..000000000000 --- a/arch/arm/configs/fortunet_defconfig +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_ARCH_CLPS711X=y -CONFIG_ARCH_FORTUNET=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_FASTFPE=y -CONFIG_BINFMT_AOUT=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_MTD=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig deleted file mode 100644 index 4a336ab5a0c0..000000000000 --- a/arch/arm/configs/g3evm_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7367=y -CONFIG_MACH_G3EVM=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig deleted file mode 100644 index 21c6d0307bc3..000000000000 --- a/arch/arm/configs/g4evm_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7377=y -CONFIG_MACH_G4EVM=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index 69405a762423..e16d3f372e2a 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -34,8 +34,7 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_USB_GADGET=m CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_EXT2_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 78ed575feb1a..ebbfb27e0e74 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -18,7 +18,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_IMX_V4_V5=y +CONFIG_ARCH_MULTI_V4T=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y @@ -121,6 +123,7 @@ CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX2=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 394ded624e37..69667133321f 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -17,6 +17,8 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_MULTI_V7=y CONFIG_MACH_MX31LILLY=y CONFIG_MACH_MX31LITE=y CONFIG_MACH_PCM037=y @@ -143,15 +145,18 @@ CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_MFD_MC13XXX_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 74eee0c78f28..93f3794ba5cb 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -27,6 +27,14 @@ CONFIG_MACH_GOFLEXNET_DT=y CONFIG_MACH_LSXL_DT=y CONFIG_MACH_IOMEGA_IX2_200_DT=y CONFIG_MACH_KM_KIRKWOOD_DT=y +CONFIG_MACH_INETSPACE_V2_DT=y +CONFIG_MACH_MPLCEC4_DT=y +CONFIG_MACH_NETSPACE_V2_DT=y +CONFIG_MACH_NETSPACE_MAX_V2_DT=y +CONFIG_MACH_NETSPACE_LITE_V2_DT=y +CONFIG_MACH_NETSPACE_MINI_V2_DT=y +CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_TOPKICK_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_DOCKSTAR=y @@ -40,6 +48,7 @@ CONFIG_MACH_D2NET_V2=y CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y +CONFIG_MACH_NSA310_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/kota2_defconfig index b7735d6347ac..fa83db1ef0eb 100644 --- a/arch/arm/configs/kota2_defconfig +++ b/arch/arm/configs/kota2_defconfig @@ -112,7 +112,6 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_RENESAS_TPU=y CONFIG_LEDS_TRIGGERS=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index c88b57886e79..afbae287436b 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -74,6 +74,8 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ST1232=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=9 @@ -119,8 +121,9 @@ CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_ASYNC_TX_DMA=y CONFIG_STAGING=y +CONFIG_SENSORS_AK8975=y +CONFIG_IIO=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY_USER=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig index 306a2e2d3622..2098ce155542 100644 --- a/arch/arm/configs/mackerel_defconfig +++ b/arch/arm/configs/mackerel_defconfig @@ -70,17 +70,31 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set # CONFIG_MFD_SUPPORT is not set CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SOC_SH4_FSI=y +CONFIG_USB=y +CONFIG_USB_RENESAS_USBHS_HCD=y +CONFIG_USB_RENESAS_USBHS=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -91,7 +105,6 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a691ef4c6008..557dd291288b 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -136,7 +136,7 @@ CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_USB_GPIO_VBUS=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 53382b6c8bb4..5b8215f424c5 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -69,6 +69,10 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y +CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_THERMAL=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 00630e6af45c..a07948a87caa 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -240,7 +240,7 @@ CONFIG_USB_GADGET_S3C2410=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index dde2a1af7b39..42eab9a2a0fd 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -214,8 +214,7 @@ CONFIG_USB_TEST=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index cd5e6ba9a54d..952430d9e2d9 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,8 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y @@ -10,6 +11,8 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y CONFIG_ARCH_ORION5X=y CONFIG_MACH_DB88F5281=y CONFIG_MACH_RD88F5182=y @@ -24,7 +27,7 @@ CONFIG_MACH_TS409=y CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y -CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_EDMINI_V2_DT=y CONFIG_MACH_D2NET=y CONFIG_MACH_BIGDISK=y CONFIG_MACH_NET2BIG=y @@ -33,17 +36,13 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_FPE_NWFPE=y CONFIG_VFP=y -# CONFIG_SUSPEND is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -54,13 +53,10 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -82,12 +78,11 @@ CONFIG_CHR_DEV_SG=m CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set +CONFIG_MARVELL_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -95,11 +90,12 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -109,10 +105,8 @@ CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_LM75=y # CONFIG_VGA_ARB is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -140,7 +134,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -150,25 +143,18 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index 807d4e2acb17..6a936c7c078a 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -37,7 +37,6 @@ CONFIG_SPI_SIRF=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set CONFIG_USB_GADGET=y -CONFIG_USB_FILE_STORAGE=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig deleted file mode 100644 index 42d5db1876ab..000000000000 --- a/arch/arm/configs/qil-a9260_defconfig +++ /dev/null @@ -1,114 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_QIL_A9260=y -CONFIG_AT91_SLOW_CLOCK=y -CONFIG_AT91_EARLY_USART0=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS1,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_M41T94=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig deleted file mode 100644 index b4384af1bea6..000000000000 --- a/arch/arm/configs/sam9_l9260_defconfig +++ /dev/null @@ -1,148 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_SAM9_L9260=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=25 -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_RAID_ATTRS=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1553=y -CONFIG_RTC_DRV_DS1742=y -CONFIG_RTC_DRV_M48T86=y -CONFIG_RTC_DRV_V3020=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_CODEPAGE_950=y -CONFIG_NLS_CODEPAGE_932=y -CONFIG_NLS_CODEPAGE_949=y -CONFIG_NLS_CODEPAGE_874=y -CONFIG_NLS_ISO8859_8=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index df77931a4326..2e0419d1b964 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -214,7 +214,7 @@ CONFIG_USB_GADGET_DUMMY_HCD=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig deleted file mode 100644 index 52f1488591c7..000000000000 --- a/arch/arm/configs/stamp9g20_defconfig +++ /dev/null @@ -1,128 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_TREE_PREEMPT_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_PORTUXG20=y -CONFIG_MACH_STAMP9G20=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AT91_SLOW_CLOCK=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_KEXEC=y -CONFIG_CPU_IDLE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -CONFIG_GPIO_SYSFS=y -CONFIG_W1=y -CONFIG_W1_MASTER_GPIO=y -CONFIG_W1_SLAVE_THERM=y -CONFIG_W1_SLAVE_DS2431=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=m -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index e2184f6c20b3..a7827fd0616f 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -80,6 +80,10 @@ CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_CMA=y +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_AD525X_DPOT=y @@ -98,12 +102,12 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_BRCMFMAC=m CONFIG_RT2X00=y CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y -# CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y @@ -116,7 +120,8 @@ CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y -CONFIG_SPI_TEGRA=y +CONFIG_SPI_TEGRA20_SFLASH=y +CONFIG_SPI_TEGRA20_SLINK=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y @@ -138,6 +143,15 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m +CONFIG_DRM=y +CONFIG_DRM_TEGRA=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set @@ -205,6 +219,9 @@ CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index da6845493caa..250625d5223f 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -69,6 +69,8 @@ CONFIG_GPIO_TC3589X=y CONFIG_POWER_SUPPLY=y CONFIG_AB8500_BM=y CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig deleted file mode 100644 index a1501e1e1a90..000000000000 --- a/arch/arm/configs/usb-a9260_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_USB_A9260=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 1d01ddd33122..d36e0d3c86ec 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -139,7 +139,7 @@ CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_GADGET=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 547a3c1e59db..731d4f985310 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -143,7 +143,7 @@ CONFIG_USB_GADGET=m CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=y diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index f70ae175a3d6..d3db39860b9c 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -16,7 +16,6 @@ generic-y += local64.h generic-y += msgbuf.h generic-y += param.h generic-y += parport.h -generic-y += percpu.h generic-y += poll.h generic-y += resource.h generic-y += sections.h @@ -31,5 +30,6 @@ generic-y += sockios.h generic-y += termbits.h generic-y += termios.h generic-y += timex.h +generic-y += trace_clock.h generic-y += types.h generic-y += unaligned.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 2ef95813fce0..eb87200aa4b5 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -250,6 +250,7 @@ * Beware, it also clobers LR. */ .macro safe_svcmode_maskall reg:req +#if __LINUX_ARM_ARCH__ >= 6 mrs \reg , cpsr mov lr , \reg and lr , lr , #MODE_MASK @@ -266,6 +267,13 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) __ERET 1: msr cpsr_c, \reg 2: +#else +/* + * workaround for possibly broken pre-v6 hardware + * (akita, Sharp Zaurus C-1000, PXA270-based) + */ + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, \reg +#endif .endm /* diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h index d797223b39d5..2744f0602550 100644 --- a/arch/arm/include/asm/cpu.h +++ b/arch/arm/include/asm/cpu.h @@ -15,6 +15,7 @@ struct cpuinfo_arm { struct cpu cpu; + u32 cpuid; #ifdef CONFIG_SMP unsigned int loops_per_jiffy; #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cb47d28cbe1f..a59dcb5ab5fc 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -25,6 +25,19 @@ #define CPUID_EXT_ISAR4 "c2, 4" #define CPUID_EXT_ISAR5 "c2, 5" +#define MPIDR_SMP_BITMASK (0x3 << 30) +#define MPIDR_SMP_VALUE (0x2 << 30) + +#define MPIDR_MT_BITMASK (0x1 << 24) + +#define MPIDR_HWID_BITMASK 0xFFFFFF + +#define MPIDR_LEVEL_BITS 8 +#define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1) + +#define MPIDR_AFFINITY_LEVEL(mpidr, level) \ + ((mpidr >> (MPIDR_LEVEL_BITS * level)) & MPIDR_LEVEL_MASK) + extern unsigned int processor_id; #ifdef CONFIG_CPU_CP15 diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h index a0ada3ea4358..f2e5cad3f306 100644 --- a/arch/arm/include/asm/cti.h +++ b/arch/arm/include/asm/cti.h @@ -146,15 +146,7 @@ static inline void cti_irq_ack(struct cti *cti) */ static inline void cti_unlock(struct cti *cti) { - void __iomem *base = cti->base; - unsigned long val; - - val = __raw_readl(base + LOCKSTATUS); - - if (val & 1) { - val = LOCKCODE; - __raw_writel(val, base + LOCKACCESS); - } + __raw_writel(LOCKCODE, cti->base + LOCKACCESS); } /** @@ -166,14 +158,6 @@ static inline void cti_unlock(struct cti *cti) */ static inline void cti_lock(struct cti *cti) { - void __iomem *base = cti->base; - unsigned long val; - - val = __raw_readl(base + LOCKSTATUS); - - if (!(val & 1)) { - val = ~LOCKCODE; - __raw_writel(val, base + LOCKACCESS); - } + __raw_writel(~LOCKCODE, cti->base + LOCKACCESS); } #endif diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 23004847bb05..8ea02ac3ec1a 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -211,13 +211,6 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, extern void __init init_dma_coherent_pool_size(unsigned long size); /* - * This can be called during boot to increase the size of the consistent - * DMA region above it's default value of 2MB. It must be called before the - * memory allocator is initialised, i.e. before any core_initcall. - */ -static inline void init_consistent_dma_size(unsigned long size) { } - -/* * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" * and utilize bounce buffers as needed to work around limited DMA windows. * diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index c4c87bc12231..3b2c40b5bfa2 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -102,6 +102,10 @@ #define L2X0_ADDR_FILTER_EN 1 +#define L2X0_CTRL_EN 1 + +#define L2X0_WAY_SIZE_SHIFT 3 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask); #if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF) @@ -126,6 +130,7 @@ struct l2x0_regs { unsigned long filter_end; unsigned long prefetch_ctrl; unsigned long pwr_ctrl; + unsigned long ctrl; }; extern struct l2x0_regs l2x0_saved_regs; diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index 6b9b077d86b3..6636430dd0e6 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -50,11 +50,7 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC -#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) -#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) - -#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) -#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) +#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) static inline void sysctl_soft_reset(void __iomem *base) { diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index e14af1a1a320..2bebad36fc83 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -47,7 +47,7 @@ struct device_node; struct pt_regs; -void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, +void __vic_init(void __iomem *base, int irq_start, u32 vic_sources, u32 resume_sources, struct device_node *node); void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); int vic_of_init(struct device_node *node, struct device_node *parent); diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index c190bc992f0e..01169dd723f1 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -98,12 +98,12 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_BASE_WCR 112 /* Accessor macros for the debug registers. */ -#define ARM_DBG_READ(M, OP2, VAL) do {\ - asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\ +#define ARM_DBG_READ(N, M, OP2, VAL) do {\ + asm volatile("mrc p14, 0, %0, " #N "," #M ", " #OP2 : "=r" (VAL));\ } while (0) -#define ARM_DBG_WRITE(M, OP2, VAL) do {\ - asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\ +#define ARM_DBG_WRITE(N, M, OP2, VAL) do {\ + asm volatile("mcr p14, 0, %0, " #N "," #M ", " #OP2 : : "r" (VAL));\ } while (0) struct notifier_block; diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 42f042ee4ada..652b56086de7 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -374,7 +374,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #ifdef CONFIG_MMU #define ARCH_HAS_VALID_PHYS_ADDR_RANGE -extern int valid_phys_addr_range(unsigned long addr, size_t size); +extern int valid_phys_addr_range(phys_addr_t addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); extern int devmem_is_allowed(unsigned long pfn); #endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 195ac2f9d3d3..2fe141fcc8d6 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -40,6 +40,13 @@ extern void iotable_init(struct map_desc *, int); extern void vm_reserve_area_early(unsigned long addr, unsigned long size, void *caller); +#ifdef CONFIG_DEBUG_LL +extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr); +extern void debug_ll_io_init(void); +#else +static inline void debug_ll_io_init(void) {} +#endif + struct mem_type; extern const struct mem_type *get_mem_type(unsigned int type); /* diff --git a/arch/arm/include/asm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h deleted file mode 100644 index ea6d063923b8..000000000000 --- a/arch/arm/include/asm/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/include/asm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct atmel_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void atmel_register_uart_fns(struct atmel_port_fns *fns); -#else -#define atmel_register_uart_fns(fns) do { } while (0) -#endif - - diff --git a/arch/arm/include/asm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h deleted file mode 100644 index d09064bf95a0..000000000000 --- a/arch/arm/include/asm/mach/serial_sa1100.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/mach/serial_sa1100.h - * - * Author: Nicolas Pitre - * - * Moved and changed lots, Russell King - * - * Low level machine dependent UART functions. - */ - -struct uart_port; -struct uart_info; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct sa1100_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); -}; - -#ifdef CONFIG_SERIAL_SA1100 -void sa1100_register_uart_fns(struct sa1100_port_fns *fns); -void sa1100_register_uart(int idx, int port); -#else -#define sa1100_register_uart_fns(fns) do { } while (0) -#define sa1100_register_uart(idx,port) do { } while (0) -#endif diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h deleted file mode 100644 index ea297ac70bc6..000000000000 --- a/arch/arm/include/asm/mach/udc_pxa2xx.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/include/asm/mach/udc_pxa2xx.h - * - * This supports machine-specific differences in how the PXA2xx - * USB Device Controller (UDC) is wired. - * - * It is set in linux/arch/arm/mach-pxa/<machine>.c or in - * linux/arch/mach-ixp4xx/<machine>.c and used in - * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c - */ - -struct pxa2xx_udc_mach_info { - int (*udc_is_connected)(void); /* do we see host? */ - void (*udc_command)(int cmd); -#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ -#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ - - /* Boards following the design guidelines in the developer's manual, - * with on-chip GPIOs not Lubbock's weird hardware, can have a sane - * VBUS IRQ and omit the methods above. Store the GPIO number - * here. Note that sometimes the signals go through inverters... - */ - bool gpio_pullup_inverted; - int gpio_pullup; /* high == pullup activated */ -}; - diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 14965658a923..9f77e7804f3b 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -5,18 +5,15 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID - unsigned int id; - raw_spinlock_t id_lock; + u64 id; #endif - unsigned int kvm_seq; + unsigned int vmalloc_seq; } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID -#define ASID(mm) ((mm)->context.id & 255) - -/* init_mm.context.id_lock should be initialized. */ -#define INIT_MM_CONTEXT(name) \ - .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock), +#define ASID_BITS 8 +#define ASID_MASK ((~0ULL) << ASID_BITS) +#define ASID(mm) ((mm)->context.id & ~ASID_MASK) #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 0306bc642c0d..e1f644bc7cc5 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -20,88 +20,12 @@ #include <asm/proc-fns.h> #include <asm-generic/mm_hooks.h> -void __check_kvm_seq(struct mm_struct *mm); +void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID -/* - * On ARMv6, we have the following structure in the Context ID: - * - * 31 7 0 - * +-------------------------+-----------+ - * | process ID | ASID | - * +-------------------------+-----------+ - * | context ID | - * +-------------------------------------+ - * - * The ASID is used to tag entries in the CPU caches and TLBs. - * The context ID is used by debuggers and trace logic, and - * should be unique within all running processes. - */ -#define ASID_BITS 8 -#define ASID_MASK ((~0) << ASID_BITS) -#define ASID_FIRST_VERSION (1 << ASID_BITS) - -extern unsigned int cpu_last_asid; - -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm); -void __new_context(struct mm_struct *mm); -void cpu_set_reserved_ttbr0(void); - -static inline void switch_new_context(struct mm_struct *mm) -{ - unsigned long flags; - - __new_context(mm); - - local_irq_save(flags); - cpu_switch_mm(mm->pgd, mm); - local_irq_restore(flags); -} - -static inline void check_and_switch_context(struct mm_struct *mm, - struct task_struct *tsk) -{ - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); - - /* - * Required during context switch to avoid speculative page table - * walking with the wrong TTBR. - */ - cpu_set_reserved_ttbr0(); - - if (!((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) - /* - * The ASID is from the current generation, just switch to the - * new pgd. This condition is only true for calls from - * context_switch() and interrupts are already disabled. - */ - cpu_switch_mm(mm->pgd, mm); - else if (irqs_disabled()) - /* - * Defer the new ASID allocation until after the context - * switch critical region since __new_context() cannot be - * called with interrupts disabled (it sends IPIs). - */ - set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM); - else - /* - * That is a direct call to switch_mm() or activate_mm() with - * interrupts enabled and a new context. - */ - switch_new_context(mm); -} - -#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0) - -#define finish_arch_post_lock_switch \ - finish_arch_post_lock_switch -static inline void finish_arch_post_lock_switch(void) -{ - if (test_and_clear_thread_flag(TIF_SWITCH_MM)) - switch_new_context(current->mm); -} +void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); +#define init_new_context(tsk,mm) ({ mm->context.id = 0; }) #else /* !CONFIG_CPU_HAS_ASID */ @@ -110,8 +34,8 @@ static inline void finish_arch_post_lock_switch(void) static inline void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) { - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); + if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)) + __check_vmalloc_seq(mm); if (irqs_disabled()) /* @@ -143,6 +67,7 @@ static inline void finish_arch_post_lock_switch(void) #endif /* CONFIG_CPU_HAS_ASID */ #define destroy_context(mm) do { } while(0) +#define activate_mm(prev,next) switch_mm(prev, next, NULL) /* * This is called when "tsk" is about to enter lazy TLB mode. @@ -186,6 +111,5 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, } #define deactivate_mm(tsk,mm) do { } while (0) -#define activate_mm(prev,next) switch_mm(prev, next, NULL) #endif diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h new file mode 100644 index 000000000000..968c0a14e0a3 --- /dev/null +++ b/arch/arm/include/asm/percpu.h @@ -0,0 +1,45 @@ +/* + * Copyright 2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_ARM_PERCPU_H_ +#define _ASM_ARM_PERCPU_H_ + +/* + * Same as asm-generic/percpu.h, except that we store the per cpu offset + * in the TPIDRPRW. TPIDRPRW only exists on V6K and V7 + */ +#if defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6) +static inline void set_my_cpu_offset(unsigned long off) +{ + /* Set TPIDRPRW */ + asm volatile("mcr p15, 0, %0, c13, c0, 4" : : "r" (off) : "memory"); +} + +static inline unsigned long __my_cpu_offset(void) +{ + unsigned long off; + /* Read TPIDRPRW */ + asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory"); + return off; +} +#define __my_cpu_offset __my_cpu_offset() +#else +#define set_my_cpu_offset(x) do {} while(0) + +#endif /* CONFIG_SMP */ + +#include <asm-generic/percpu.h> + +#endif /* _ASM_ARM_PERCPU_H_ */ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 625cd621a436..755877527cf9 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -21,4 +21,11 @@ #define C(_x) PERF_COUNT_HW_CACHE_##_x #define CACHE_OP_UNSUPPORTED 0xFFFF +#ifdef CONFIG_HW_PERF_EVENTS +struct pt_regs; +extern unsigned long perf_instruction_pointer(struct pt_regs *regs); +extern unsigned long perf_misc_flags(struct pt_regs *regs); +#define perf_misc_flags(regs) perf_misc_flags(regs) +#endif + #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 2317a71c8f8e..f97ee02386ee 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -115,6 +115,7 @@ * The PTE table pointer refers to the hardware entries; the "Linux" * entries are stored 1024 bytes below. */ +#define L_PTE_VALID (_AT(pteval_t, 1) << 0) /* Valid */ #define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) #define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) #define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ @@ -123,6 +124,7 @@ #define L_PTE_USER (_AT(pteval_t, 1) << 8) #define L_PTE_XN (_AT(pteval_t, 1) << 9) #define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ +#define L_PTE_NONE (_AT(pteval_t, 1) << 11) /* * These are the memory types, defined to be compatible with diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index b24903549d1c..a3f37929940a 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -67,7 +67,8 @@ * These bits overlap with the hardware bits but the naming is preserved for * consistency with the classic page table format. */ -#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Valid */ +#define L_PTE_VALID (_AT(pteval_t, 1) << 0) /* Valid */ +#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Present */ #define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ #define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */ #define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) /* AP[2] */ @@ -76,6 +77,7 @@ #define L_PTE_XN (_AT(pteval_t, 1) << 54) /* XN */ #define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) /* unused */ #define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */ +#define L_PTE_NONE (_AT(pteval_t, 1) << 57) /* PROT_NONE */ /* * To be used in assembly code with the upper page attributes. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 08c12312a1f9..9c82f988c0e3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -73,7 +73,7 @@ extern pgprot_t pgprot_kernel; #define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b)) -#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY) +#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY | L_PTE_NONE) #define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN) #define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER) #define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) @@ -83,7 +83,7 @@ extern pgprot_t pgprot_kernel; #define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN) #define PAGE_KERNEL_EXEC pgprot_kernel -#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN) +#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE) #define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN) #define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER) #define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) @@ -203,9 +203,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) #define pte_special(pte) (0) -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) +#define pte_present_user(pte) (pte_present(pte) && (pte_val(pte) & L_PTE_USER)) #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) @@ -242,7 +240,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER; + const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER | L_PTE_NONE; pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); return pte; } diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index a26170dce02e..f24edad26c70 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -67,19 +67,19 @@ struct arm_pmu { cpumask_t active_irqs; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); - void (*enable)(struct hw_perf_event *evt, int idx); - void (*disable)(struct hw_perf_event *evt, int idx); + void (*enable)(struct perf_event *event); + void (*disable)(struct perf_event *event); int (*get_event_idx)(struct pmu_hw_events *hw_events, - struct hw_perf_event *hwc); + struct perf_event *event); int (*set_event_filter)(struct hw_perf_event *evt, struct perf_event_attr *attr); - u32 (*read_counter)(int idx); - void (*write_counter)(int idx, u32 val); - void (*start)(void); - void (*stop)(void); + u32 (*read_counter)(struct perf_event *event); + void (*write_counter)(struct perf_event *event, u32 val); + void (*start)(struct arm_pmu *); + void (*stop)(struct arm_pmu *); void (*reset)(void *); - int (*request_irq)(irq_handler_t handler); - void (*free_irq)(void); + int (*request_irq)(struct arm_pmu *, irq_handler_t handler); + void (*free_irq)(struct arm_pmu *); int (*map_event)(struct perf_event *event); int num_events; atomic_t active_events; @@ -93,15 +93,11 @@ struct arm_pmu { extern const struct dev_pm_ops armpmu_dev_pm_ops; -int armpmu_register(struct arm_pmu *armpmu, char *name, int type); +int armpmu_register(struct arm_pmu *armpmu, int type); -u64 armpmu_event_update(struct perf_event *event, - struct hw_perf_event *hwc, - int idx); +u64 armpmu_event_update(struct perf_event *event); -int armpmu_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, - int idx); +int armpmu_event_set_period(struct perf_event *event); int armpmu_map_event(struct perf_event *event, const unsigned (*event_map)[PERF_COUNT_HW_MAX], diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index aeae9c609df4..a219227c3e43 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -11,10 +11,13 @@ #ifndef __ASMARM_PROM_H #define __ASMARM_PROM_H +#define HAVE_ARCH_DEVTREE_FIXUPS + #ifdef CONFIG_OF extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); extern void arm_dt_memblock_reserve(void); +extern void __init arm_dt_init_cpu_maps(void); #else /* CONFIG_OF */ @@ -24,6 +27,7 @@ static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) } static inline void arm_dt_memblock_reserve(void) { } +static inline void arm_dt_init_cpu_maps(void) { } #endif /* CONFIG_OF */ #endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 2e3be16c6766..d3a22bebe6ce 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -79,6 +79,7 @@ extern void cpu_die(void); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask); struct smp_operations { #ifdef CONFIG_SMP diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index 558d6c80aca9..aaa61b6f50ff 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -5,6 +5,9 @@ #ifndef __ASMARM_SMP_PLAT_H #define __ASMARM_SMP_PLAT_H +#include <linux/cpumask.h> +#include <linux/err.h> + #include <asm/cputype.h> /* @@ -48,5 +51,19 @@ static inline int cache_ops_need_broadcast(void) */ extern int __cpu_logical_map[]; #define cpu_logical_map(cpu) __cpu_logical_map[cpu] +/* + * Retrieve logical cpu index corresponding to a given MPIDR[23:0] + * - mpidr: MPIDR[23:0] to be used for the look-up + * + * Returns the cpu logical index or -EINVAL on look-up error + */ +static inline int get_logical_index(u32 mpidr) +{ + int cpu; + for (cpu = 0; cpu < nr_cpu_ids; cpu++) + if (cpu_logical_map(cpu) == mpidr) + return cpu; + return -EINVAL; +} #endif diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index 9fdded6b1089..f1d96d4e8092 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -7,6 +7,8 @@ #ifndef _ASM_ARM_SYSCALL_H #define _ASM_ARM_SYSCALL_H +#include <linux/audit.h> /* for AUDIT_ARCH_* */ +#include <linux/elf.h> /* for ELF_EM */ #include <linux/err.h> #include <linux/sched.h> @@ -95,4 +97,11 @@ static inline void syscall_set_arguments(struct task_struct *task, memcpy(®s->ARM_r0 + i, args, n * sizeof(args[0])); } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ + /* ARM tasks don't change audit architectures on the fly. */ + return AUDIT_ARCH_ARM; +} + #endif /* _ASM_ARM_SYSCALL_H */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 8477b4c1d39f..cddda1f41f0f 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -151,10 +151,10 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 #define TIF_SYSCALL_TRACEPOINT 10 +#define TIF_SECCOMP 11 /* seccomp syscall filtering active */ #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 -#define TIF_SECCOMP 21 #define TIF_SWITCH_MM 22 /* deferred switch_mm */ #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -163,11 +163,12 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) -#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/include/debug/imx.S index 761e45f9456f..0b65d792f664 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/include/debug/imx.S @@ -10,27 +10,38 @@ * published by the Free Software Foundation. * */ -#include <mach/hardware.h> - #ifdef CONFIG_DEBUG_IMX1_UART -#define UART_PADDR MX1_UART1_BASE_ADDR +#define UART_PADDR 0x00206000 #elif defined (CONFIG_DEBUG_IMX25_UART) -#define UART_PADDR MX25_UART1_BASE_ADDR +#define UART_PADDR 0x43f90000 #elif defined (CONFIG_DEBUG_IMX21_IMX27_UART) -#define UART_PADDR MX2x_UART1_BASE_ADDR +#define UART_PADDR 0x1000a000 #elif defined (CONFIG_DEBUG_IMX31_IMX35_UART) -#define UART_PADDR MX3x_UART1_BASE_ADDR +#define UART_PADDR 0x43f90000 #elif defined (CONFIG_DEBUG_IMX51_UART) -#define UART_PADDR MX51_UART1_BASE_ADDR +#define UART_PADDR 0x73fbc000 #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) -#define UART_PADDR MX53_UART1_BASE_ADDR +#define UART_PADDR 0x53fbc000 #elif defined (CONFIG_DEBUG_IMX6Q_UART2) -#define UART_PADDR MX6Q_UART2_BASE_ADDR +#define UART_PADDR 0x021e8000 #elif defined (CONFIG_DEBUG_IMX6Q_UART4) -#define UART_PADDR MX6Q_UART4_BASE_ADDR +#define UART_PADDR 0x021f0000 #endif -#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) +/* + * FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to + * stay sync with that. It's hard to maintain, and should be fixed + * globally for multi-platform build to use a fixed virtual address + * for low-level debug uart port across platforms. + */ +#define IMX_IO_P2V(x) ( \ + (((x) & 0x80000000) >> 7) | \ + (0xf4000000 + \ + (((x) & 0x50000000) >> 6) + \ + (((x) & 0x0b000000) >> 4) + \ + (((x) & 0x000fffff)))) + +#define UART_VADDR IMX_IO_P2V(UART_PADDR) .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S new file mode 100644 index 000000000000..04eb56d5db2c --- /dev/null +++ b/arch/arm/include/debug/sunxi.S @@ -0,0 +1,27 @@ +/* + * Early serial output macro for Allwinner A1X SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#if defined(CONFIG_DEBUG_SUNXI_UART0) +#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28000 +#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28000 +#elif defined(CONFIG_DEBUG_SUNXI_UART1) +#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400 +#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400 +#endif + + .macro addruart, rp, rv, tmp + ldr \rp, =SUNXI_UART_DEBUG_PHYS_BASE + ldr \rv, =SUNXI_UART_DEBUG_VIRT_BASE + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/include/debug/vexpress.S b/arch/arm/include/debug/vexpress.S index 9f509f55d078..dc8e882a6257 100644 --- a/arch/arm/include/debug/vexpress.S +++ b/arch/arm/include/debug/vexpress.S @@ -21,14 +21,17 @@ #if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT) .macro addruart,rp,rv,tmp + .arch armv7-a @ Make an educated guess regarding the memory map: - @ - the original A9 core tile, which has MPCore peripherals - @ located at 0x1e000000, should use UART at 0x10009000 + @ - the original A9 core tile (based on ARM Cortex-A9 r0p1) + @ should use UART at 0x10009000 @ - all other (RS1 complaint) tiles use UART mapped @ at 0x1c090000 - mrc p15, 4, \tmp, c15, c0, 0 - cmp \tmp, #0x1e000000 + mrc p15, 0, \rp, c0, c0, 0 + movw \rv, #0xc091 + movt \rv, #0x410f + cmp \rp, \rv @ Original memory map moveq \rp, #DEBUG_LL_UART_OFFSET diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 66f711b2e0e8..6809200c31fb 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -100,6 +100,13 @@ ENTRY(printch) b 1b ENDPROC(printch) +ENTRY(debug_ll_addr) + addruart r2, r3, ip + str r2, [r0] + str r3, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) + #else ENTRY(printascii) @@ -119,4 +126,11 @@ ENTRY(printch) mov pc, lr ENDPROC(printch) +ENTRY(debug_ll_addr) + mov r2, #0 + str r2, [r0] + str r2, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) + #endif diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index bee7f9d47f02..70f1bdeb241b 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -19,8 +19,10 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/cputype.h> #include <asm/setup.h> #include <asm/page.h> +#include <asm/smp_plat.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -61,6 +63,108 @@ void __init arm_dt_memblock_reserve(void) } } +/* + * arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree + * and builds the cpu logical map array containing MPIDR values related to + * logical cpus + * + * Updates the cpu possible mask with the number of parsed cpu nodes + */ +void __init arm_dt_init_cpu_maps(void) +{ + /* + * Temp logical map is initialized with UINT_MAX values that are + * considered invalid logical map entries since the logical map must + * contain a list of MPIDR[23:0] values where MPIDR[31:24] must + * read as 0. + */ + struct device_node *cpu, *cpus; + u32 i, j, cpuidx = 1; + u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; + + u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = UINT_MAX }; + bool bootcpu_valid = false; + cpus = of_find_node_by_path("/cpus"); + + if (!cpus) + return; + + for_each_child_of_node(cpus, cpu) { + u32 hwid; + + pr_debug(" * %s...\n", cpu->full_name); + /* + * A device tree containing CPU nodes with missing "reg" + * properties is considered invalid to build the + * cpu_logical_map. + */ + if (of_property_read_u32(cpu, "reg", &hwid)) { + pr_debug(" * %s missing reg property\n", + cpu->full_name); + return; + } + + /* + * 8 MSBs must be set to 0 in the DT since the reg property + * defines the MPIDR[23:0]. + */ + if (hwid & ~MPIDR_HWID_BITMASK) + return; + + /* + * Duplicate MPIDRs are a recipe for disaster. + * Scan all initialized entries and check for + * duplicates. If any is found just bail out. + * temp values were initialized to UINT_MAX + * to avoid matching valid MPIDR[23:0] values. + */ + for (j = 0; j < cpuidx; j++) + if (WARN(tmp_map[j] == hwid, "Duplicate /cpu reg " + "properties in the DT\n")) + return; + + /* + * Build a stashed array of MPIDR values. Numbering scheme + * requires that if detected the boot CPU must be assigned + * logical id 0. Other CPUs get sequential indexes starting + * from 1. If a CPU node with a reg property matching the + * boot CPU MPIDR is detected, this is recorded so that the + * logical map built from DT is validated and can be used + * to override the map created in smp_setup_processor_id(). + */ + if (hwid == mpidr) { + i = 0; + bootcpu_valid = true; + } else { + i = cpuidx++; + } + + if (WARN(cpuidx > nr_cpu_ids, "DT /cpu %u nodes greater than " + "max cores %u, capping them\n", + cpuidx, nr_cpu_ids)) { + cpuidx = nr_cpu_ids; + break; + } + + tmp_map[i] = hwid; + } + + if (WARN(!bootcpu_valid, "DT missing boot CPU MPIDR[23:0], " + "fall back to default cpu_logical_map\n")) + return; + + /* + * Since the boot CPU node contains proper data, and all nodes have + * a reg property, the DT CPU list can be considered valid and the + * logical map created in smp_setup_processor_id() can be overridden + */ + for (i = 0; i < cpuidx; i++) { + set_cpu_possible(i, true); + cpu_logical_map(i) = tmp_map[i]; + pr_debug("cpu logical map 0x%x\n", cpu_logical_map(i)); + } +} + /** * setup_machine_fdt - Machine setup when an dtb was passed to the kernel * @dt_phys: physical address of dt blob diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 88a07feaa05f..a6c301e90a3b 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -417,16 +417,6 @@ local_restart: ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing stmdb sp!, {r4, r5} @ push fifth and sixth args -#ifdef CONFIG_SECCOMP - tst r10, #_TIF_SECCOMP - beq 1f - mov r0, scno - bl __secure_computing - add r0, sp, #S_R0 + S_OFF @ pointer to regs - ldmia r0, {r0 - r3} @ have to reload r0 - r3 -1: -#endif - tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls? bne __sys_trace @@ -458,11 +448,13 @@ __sys_trace: ldmccia r1, {r0 - r6} @ have to reload r0 - r6 stmccia sp, {r4, r5} @ and update the stack args ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine - b 2b + cmp scno, #-1 @ skip the syscall? + bne 2b + add sp, sp, #S_OFF @ restore stack + b ret_slow_syscall __sys_trace_return: str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 - mov r1, scno mov r0, sp bl syscall_trace_exit b ret_slow_syscall diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 278cfc144f44..2c228a07e58c 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -68,7 +68,7 @@ __after_proc_init: * CP15 system control register value returned in r0 from * the CPU init function. */ -#ifdef CONFIG_ALIGNMENT_TRAP +#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 orr r0, r0, #CR_A #else bic r0, r0, #CR_A diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 281bf3301241..5ff2e77782b1 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -52,14 +52,14 @@ static u8 debug_arch; /* Maximum supported watchpoint length. */ static u8 max_watchpoint_len; -#define READ_WB_REG_CASE(OP2, M, VAL) \ - case ((OP2 << 4) + M): \ - ARM_DBG_READ(c ## M, OP2, VAL); \ +#define READ_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_READ(c0, c ## M, OP2, VAL); \ break -#define WRITE_WB_REG_CASE(OP2, M, VAL) \ - case ((OP2 << 4) + M): \ - ARM_DBG_WRITE(c ## M, OP2, VAL);\ +#define WRITE_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_WRITE(c0, c ## M, OP2, VAL); \ break #define GEN_READ_WB_REG_CASES(OP2, VAL) \ @@ -136,12 +136,12 @@ static u8 get_debug_arch(void) /* Do we implement the extended CPUID interface? */ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); + pr_warn_once("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); return ARM_DEBUG_ARCH_V6; } - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return (didr >> 16) & 0xf; } @@ -169,7 +169,7 @@ static int debug_exception_updates_fsr(void) static int get_num_wrp_resources(void) { u32 didr; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return ((didr >> 28) & 0xf) + 1; } @@ -177,7 +177,7 @@ static int get_num_wrp_resources(void) static int get_num_brp_resources(void) { u32 didr; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return ((didr >> 24) & 0xf) + 1; } @@ -228,19 +228,17 @@ static int get_num_brps(void) * be put into halting debug mode at any time by an external debugger * but there is nothing we can do to prevent that. */ -static int enable_monitor_mode(void) +static int monitor_mode_enabled(void) { u32 dscr; - int ret = 0; - - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); + return !!(dscr & ARM_DSCR_MDBGEN); +} - /* Ensure that halting mode is disabled. */ - if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, - "halting debug mode enabled. Unable to access hardware resources.\n")) { - ret = -EPERM; - goto out; - } +static int enable_monitor_mode(void) +{ + u32 dscr; + ARM_DBG_READ(c0, c1, 0, dscr); /* If monitor mode is already enabled, just return. */ if (dscr & ARM_DSCR_MDBGEN) @@ -250,24 +248,27 @@ static int enable_monitor_mode(void) switch (get_debug_arch()) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: - ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); + ARM_DBG_WRITE(c0, c1, 0, (dscr | ARM_DSCR_MDBGEN)); break; case ARM_DEBUG_ARCH_V7_ECP14: case ARM_DEBUG_ARCH_V7_1: - ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN)); + ARM_DBG_WRITE(c0, c2, 2, (dscr | ARM_DSCR_MDBGEN)); + isb(); break; default: - ret = -ENODEV; - goto out; + return -ENODEV; } /* Check that the write made it through. */ - ARM_DBG_READ(c1, 0, dscr); - if (!(dscr & ARM_DSCR_MDBGEN)) - ret = -EPERM; + ARM_DBG_READ(c0, c1, 0, dscr); + if (!(dscr & ARM_DSCR_MDBGEN)) { + pr_warn_once("Failed to enable monitor mode on CPU %d.\n", + smp_processor_id()); + return -EPERM; + } out: - return ret; + return 0; } int hw_breakpoint_slots(int type) @@ -328,14 +329,9 @@ int arch_install_hw_breakpoint(struct perf_event *bp) { struct arch_hw_breakpoint *info = counter_arch_bp(bp); struct perf_event **slot, **slots; - int i, max_slots, ctrl_base, val_base, ret = 0; + int i, max_slots, ctrl_base, val_base; u32 addr, ctrl; - /* Ensure that we are in monitor mode and halting mode is disabled. */ - ret = enable_monitor_mode(); - if (ret) - goto out; - addr = info->address; ctrl = encode_ctrl_reg(info->ctrl) | 0x1; @@ -362,9 +358,9 @@ int arch_install_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) { - ret = -EBUSY; - goto out; + if (i == max_slots) { + pr_warning("Can't find any breakpoint slot\n"); + return -EBUSY; } /* Override the breakpoint data with the step data. */ @@ -383,9 +379,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp) /* Setup the control register. */ write_wb_reg(ctrl_base + i, ctrl); - -out: - return ret; + return 0; } void arch_uninstall_hw_breakpoint(struct perf_event *bp) @@ -416,8 +410,10 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) + if (i == max_slots) { + pr_warning("Can't find any breakpoint slot\n"); return; + } /* Ensure that we disable the mismatch breakpoint. */ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE && @@ -596,6 +592,10 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) int ret = 0; u32 offset, alignment_mask = 0x3; + /* Ensure that we are in monitor debug mode. */ + if (!monitor_mode_enabled()) + return -ENODEV; + /* Build the arch_hw_breakpoint. */ ret = arch_build_bp_info(bp); if (ret) @@ -858,7 +858,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, local_irq_enable(); /* We only handle watchpoints and hardware breakpoints. */ - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); /* Perform perf callbacks. */ switch (ARM_DSCR_MOE(dscr)) { @@ -906,7 +906,7 @@ static struct undef_hook debug_reg_hook = { static void reset_ctrl_regs(void *unused) { int i, raw_num_brps, err = 0, cpu = smp_processor_id(); - u32 dbg_power; + u32 val; /* * v7 debug contains save and restore registers so that debug state @@ -919,23 +919,30 @@ static void reset_ctrl_regs(void *unused) switch (debug_arch) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: - /* ARMv6 cores just need to reset the registers. */ - goto reset_regs; + /* ARMv6 cores clear the registers out of reset. */ + goto out_mdbgen; case ARM_DEBUG_ARCH_V7_ECP14: /* * Ensure sticky power-down is clear (i.e. debug logic is * powered up). */ - asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power)); - if ((dbg_power & 0x1) == 0) + ARM_DBG_READ(c1, c5, 4, val); + if ((val & 0x1) == 0) err = -EPERM; + + /* + * Check whether we implement OS save and restore. + */ + ARM_DBG_READ(c1, c1, 4, val); + if ((val & 0x9) == 0) + goto clear_vcr; break; case ARM_DEBUG_ARCH_V7_1: /* * Ensure the OS double lock is clear. */ - asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power)); - if ((dbg_power & 0x1) == 1) + ARM_DBG_READ(c1, c3, 4, val); + if ((val & 0x1) == 1) err = -EPERM; break; } @@ -947,24 +954,29 @@ static void reset_ctrl_regs(void *unused) } /* - * Unconditionally clear the lock by writing a value + * Unconditionally clear the OS lock by writing a value * other than 0xC5ACCE55 to the access register. */ - asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); + ARM_DBG_WRITE(c1, c0, 4, 0); isb(); /* * Clear any configured vector-catch events before * enabling monitor mode. */ - asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); +clear_vcr: + ARM_DBG_WRITE(c0, c7, 0, 0); isb(); -reset_regs: - if (enable_monitor_mode()) + if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { + pr_warning("CPU %d failed to disable vector catch\n", cpu); return; + } - /* We must also reset any reserved registers. */ + /* + * The control/value register pairs are UNKNOWN out of reset so + * clear them to avoid spurious debug events. + */ raw_num_brps = get_num_brp_resources(); for (i = 0; i < raw_num_brps; ++i) { write_wb_reg(ARM_BASE_BCR + i, 0UL); @@ -975,6 +987,19 @@ reset_regs: write_wb_reg(ARM_BASE_WCR + i, 0UL); write_wb_reg(ARM_BASE_WVR + i, 0UL); } + + if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { + pr_warning("CPU %d failed to clear debug register pairs\n", cpu); + return; + } + + /* + * Have a crack at enabling monitor mode. We don't actually need + * it yet, but reporting an error early is useful if it fails. + */ +out_mdbgen: + if (enable_monitor_mode()) + cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); } static int __cpuinit dbg_reset_notify(struct notifier_block *self, @@ -992,8 +1017,6 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = { static int __init arch_hw_breakpoint_init(void) { - u32 dscr; - debug_arch = get_debug_arch(); if (!debug_arch_supported()) { @@ -1028,17 +1051,10 @@ static int __init arch_hw_breakpoint_init(void) core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " : "", core_num_wrps); - ARM_DBG_READ(c1, 0, dscr); - if (dscr & ARM_DSCR_HDBGEN) { - max_watchpoint_len = 4; - pr_warning("halting debug mode enabled. Assuming maximum watchpoint size of %u bytes.\n", - max_watchpoint_len); - } else { - /* Work out the maximum supported watchpoint length. */ - max_watchpoint_len = get_max_wp_len(); - pr_info("maximum watchpoint size is %u bytes.\n", - max_watchpoint_len); - } + /* Work out the maximum supported watchpoint length. */ + max_watchpoint_len = get_max_wp_len(); + pr_info("maximum watchpoint size is %u bytes.\n", + max_watchpoint_len); /* Register debug fault handler. */ hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP, diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 53c0304b734a..f9e8657dd241 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -86,12 +86,10 @@ armpmu_map_event(struct perf_event *event, return -ENOENT; } -int -armpmu_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) +int armpmu_event_set_period(struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; s64 left = local64_read(&hwc->period_left); s64 period = hwc->sample_period; int ret = 0; @@ -119,24 +117,22 @@ armpmu_event_set_period(struct perf_event *event, local64_set(&hwc->prev_count, (u64)-left); - armpmu->write_counter(idx, (u64)(-left) & 0xffffffff); + armpmu->write_counter(event, (u64)(-left) & 0xffffffff); perf_event_update_userpage(event); return ret; } -u64 -armpmu_event_update(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) +u64 armpmu_event_update(struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; u64 delta, prev_raw_count, new_raw_count; again: prev_raw_count = local64_read(&hwc->prev_count); - new_raw_count = armpmu->read_counter(idx); + new_raw_count = armpmu->read_counter(event); if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, new_raw_count) != prev_raw_count) @@ -159,7 +155,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx); + armpmu_event_update(event); } static void @@ -173,14 +169,13 @@ armpmu_stop(struct perf_event *event, int flags) * PERF_EF_UPDATE, see comments in armpmu_start(). */ if (!(hwc->state & PERF_HES_STOPPED)) { - armpmu->disable(hwc, hwc->idx); - armpmu_event_update(event, hwc, hwc->idx); + armpmu->disable(event); + armpmu_event_update(event); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } -static void -armpmu_start(struct perf_event *event, int flags) +static void armpmu_start(struct perf_event *event, int flags) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; @@ -200,8 +195,8 @@ armpmu_start(struct perf_event *event, int flags) * get an interrupt too soon or *way* too late if the overflow has * happened since disabling. */ - armpmu_event_set_period(event, hwc, hwc->idx); - armpmu->enable(hwc, hwc->idx); + armpmu_event_set_period(event); + armpmu->enable(event); } static void @@ -233,7 +228,7 @@ armpmu_add(struct perf_event *event, int flags) perf_pmu_disable(event->pmu); /* If we don't have a space for the counter then finish early. */ - idx = armpmu->get_event_idx(hw_events, hwc); + idx = armpmu->get_event_idx(hw_events, event); if (idx < 0) { err = idx; goto out; @@ -244,7 +239,7 @@ armpmu_add(struct perf_event *event, int flags) * sure it is disabled. */ event->hw.idx = idx; - armpmu->disable(hwc, idx); + armpmu->disable(event); hw_events->events[idx] = event; hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; @@ -264,13 +259,12 @@ validate_event(struct pmu_hw_events *hw_events, struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct hw_perf_event fake_event = event->hw; struct pmu *leader_pmu = event->group_leader->pmu; if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF) return 1; - return armpmu->get_event_idx(hw_events, &fake_event) >= 0; + return armpmu->get_event_idx(hw_events, event) >= 0; } static int @@ -316,7 +310,7 @@ static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) static void armpmu_release_hardware(struct arm_pmu *armpmu) { - armpmu->free_irq(); + armpmu->free_irq(armpmu); pm_runtime_put_sync(&armpmu->plat_device->dev); } @@ -330,7 +324,7 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu) return -ENODEV; pm_runtime_get_sync(&pmu_device->dev); - err = armpmu->request_irq(armpmu_dispatch_irq); + err = armpmu->request_irq(armpmu, armpmu_dispatch_irq); if (err) { armpmu_release_hardware(armpmu); return err; @@ -465,13 +459,13 @@ static void armpmu_enable(struct pmu *pmu) int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events); if (enabled) - armpmu->start(); + armpmu->start(armpmu); } static void armpmu_disable(struct pmu *pmu) { struct arm_pmu *armpmu = to_arm_pmu(pmu); - armpmu->stop(); + armpmu->stop(armpmu); } #ifdef CONFIG_PM_RUNTIME @@ -517,12 +511,13 @@ static void __init armpmu_init(struct arm_pmu *armpmu) }; } -int armpmu_register(struct arm_pmu *armpmu, char *name, int type) +int armpmu_register(struct arm_pmu *armpmu, int type) { armpmu_init(armpmu); + pm_runtime_enable(&armpmu->plat_device->dev); pr_info("enabled with %s PMU driver, %d counters available\n", armpmu->name, armpmu->num_events); - return perf_pmu_register(&armpmu->pmu, name, type); + return perf_pmu_register(&armpmu->pmu, armpmu->name, type); } /* @@ -576,6 +571,10 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { struct frame_tail __user *tail; + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + /* We don't support guest os callchain now */ + return; + } tail = (struct frame_tail __user *)regs->ARM_fp - 1; @@ -603,9 +602,41 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) { struct stackframe fr; + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + /* We don't support guest os callchain now */ + return; + } + fr.fp = regs->ARM_fp; fr.sp = regs->ARM_sp; fr.lr = regs->ARM_lr; fr.pc = regs->ARM_pc; walk_stackframe(&fr, callchain_trace, entry); } + +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) + return perf_guest_cbs->get_guest_ip(); + + return instruction_pointer(regs); +} + +unsigned long perf_misc_flags(struct pt_regs *regs) +{ + int misc = 0; + + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + if (perf_guest_cbs->is_user_mode()) + misc |= PERF_RECORD_MISC_GUEST_USER; + else + misc |= PERF_RECORD_MISC_GUEST_KERNEL; + } else { + if (user_mode(regs)) + misc |= PERF_RECORD_MISC_USER; + else + misc |= PERF_RECORD_MISC_KERNEL; + } + + return misc; +} diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 8d7d8d4de9d6..9a4f6307a016 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <asm/cputype.h> @@ -45,7 +46,7 @@ const char *perf_pmu_name(void) if (!cpu_pmu) return NULL; - return cpu_pmu->pmu.name; + return cpu_pmu->name; } EXPORT_SYMBOL_GPL(perf_pmu_name); @@ -70,7 +71,7 @@ static struct pmu_hw_events *cpu_pmu_get_cpu_events(void) return &__get_cpu_var(cpu_hw_events); } -static void cpu_pmu_free_irq(void) +static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) { int i, irq, irqs; struct platform_device *pmu_device = cpu_pmu->plat_device; @@ -86,7 +87,7 @@ static void cpu_pmu_free_irq(void) } } -static int cpu_pmu_request_irq(irq_handler_t handler) +static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) { int i, err, irq, irqs; struct platform_device *pmu_device = cpu_pmu->plat_device; @@ -147,7 +148,7 @@ static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu) /* Ensure the PMU has sane values out of reset. */ if (cpu_pmu && cpu_pmu->reset) - on_each_cpu(cpu_pmu->reset, NULL, 1); + on_each_cpu(cpu_pmu->reset, cpu_pmu, 1); } /* @@ -163,7 +164,9 @@ static int __cpuinit cpu_pmu_notify(struct notifier_block *b, return NOTIFY_DONE; if (cpu_pmu && cpu_pmu->reset) - cpu_pmu->reset(NULL); + cpu_pmu->reset(cpu_pmu); + else + return NOTIFY_DONE; return NOTIFY_OK; } @@ -195,13 +198,13 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = { /* * CPU PMU identification and probing. */ -static struct arm_pmu *__devinit probe_current_pmu(void) +static int __devinit probe_current_pmu(struct arm_pmu *pmu) { - struct arm_pmu *pmu = NULL; int cpu = get_cpu(); unsigned long cpuid = read_cpuid_id(); unsigned long implementor = (cpuid & 0xFF000000) >> 24; unsigned long part_number = (cpuid & 0xFFF0); + int ret = -ENODEV; pr_info("probing PMU on CPU %d\n", cpu); @@ -211,25 +214,25 @@ static struct arm_pmu *__devinit probe_current_pmu(void) case 0xB360: /* ARM1136 */ case 0xB560: /* ARM1156 */ case 0xB760: /* ARM1176 */ - pmu = armv6pmu_init(); + ret = armv6pmu_init(pmu); break; case 0xB020: /* ARM11mpcore */ - pmu = armv6mpcore_pmu_init(); + ret = armv6mpcore_pmu_init(pmu); break; case 0xC080: /* Cortex-A8 */ - pmu = armv7_a8_pmu_init(); + ret = armv7_a8_pmu_init(pmu); break; case 0xC090: /* Cortex-A9 */ - pmu = armv7_a9_pmu_init(); + ret = armv7_a9_pmu_init(pmu); break; case 0xC050: /* Cortex-A5 */ - pmu = armv7_a5_pmu_init(); + ret = armv7_a5_pmu_init(pmu); break; case 0xC0F0: /* Cortex-A15 */ - pmu = armv7_a15_pmu_init(); + ret = armv7_a15_pmu_init(pmu); break; case 0xC070: /* Cortex-A7 */ - pmu = armv7_a7_pmu_init(); + ret = armv7_a7_pmu_init(pmu); break; } /* Intel CPUs [xscale]. */ @@ -237,43 +240,54 @@ static struct arm_pmu *__devinit probe_current_pmu(void) part_number = (cpuid >> 13) & 0x7; switch (part_number) { case 1: - pmu = xscale1pmu_init(); + ret = xscale1pmu_init(pmu); break; case 2: - pmu = xscale2pmu_init(); + ret = xscale2pmu_init(pmu); break; } } put_cpu(); - return pmu; + return ret; } static int __devinit cpu_pmu_device_probe(struct platform_device *pdev) { const struct of_device_id *of_id; - struct arm_pmu *(*init_fn)(void); + int (*init_fn)(struct arm_pmu *); struct device_node *node = pdev->dev.of_node; + struct arm_pmu *pmu; + int ret = -ENODEV; if (cpu_pmu) { pr_info("attempt to register multiple PMU devices!"); return -ENOSPC; } + pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL); + if (!pmu) { + pr_info("failed to allocate PMU device!"); + return -ENOMEM; + } + if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { init_fn = of_id->data; - cpu_pmu = init_fn(); + ret = init_fn(pmu); } else { - cpu_pmu = probe_current_pmu(); + ret = probe_current_pmu(pmu); } - if (!cpu_pmu) - return -ENODEV; + if (ret) { + pr_info("failed to register PMU devices!"); + kfree(pmu); + return ret; + } + cpu_pmu = pmu; cpu_pmu->plat_device = pdev; cpu_pmu_init(cpu_pmu); - register_cpu_notifier(&cpu_pmu_hotplug_notifier); - armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); + armpmu_register(cpu_pmu, PERF_TYPE_RAW); return 0; } @@ -290,6 +304,16 @@ static struct platform_driver cpu_pmu_driver = { static int __init register_pmu_driver(void) { - return platform_driver_register(&cpu_pmu_driver); + int err; + + err = register_cpu_notifier(&cpu_pmu_hotplug_notifier); + if (err) + return err; + + err = platform_driver_register(&cpu_pmu_driver); + if (err) + unregister_cpu_notifier(&cpu_pmu_hotplug_notifier); + + return err; } device_initcall(register_pmu_driver); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 6ccc07971745..f3e22ff8b6a2 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -401,9 +401,10 @@ armv6_pmcr_counter_has_overflowed(unsigned long pmcr, return ret; } -static inline u32 -armv6pmu_read_counter(int counter) +static inline u32 armv6pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; unsigned long value = 0; if (ARMV6_CYCLE_COUNTER == counter) @@ -418,10 +419,11 @@ armv6pmu_read_counter(int counter) return value; } -static inline void -armv6pmu_write_counter(int counter, - u32 value) +static inline void armv6pmu_write_counter(struct perf_event *event, u32 value) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + if (ARMV6_CYCLE_COUNTER == counter) asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); else if (ARMV6_COUNTER0 == counter) @@ -432,12 +434,13 @@ armv6pmu_write_counter(int counter, WARN_ONCE(1, "invalid counter number (%d)\n", counter); } -static void -armv6pmu_enable_event(struct hw_perf_event *hwc, - int idx) +static void armv6pmu_enable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = 0; @@ -473,7 +476,8 @@ armv6pmu_handle_irq(int irq_num, { unsigned long pmcr = armv6_pmcr_read(); struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -489,7 +493,6 @@ armv6pmu_handle_irq(int irq_num, */ armv6_pmcr_write(pmcr); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -506,13 +509,13 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } /* @@ -527,8 +530,7 @@ armv6pmu_handle_irq(int irq_num, return IRQ_HANDLED; } -static void -armv6pmu_start(void) +static void armv6pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -540,8 +542,7 @@ armv6pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -armv6pmu_stop(void) +static void armv6pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -555,10 +556,11 @@ armv6pmu_stop(void) static int armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; /* Always place a cycle counter into the cycle counter. */ - if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { + if (ARMV6_PERFCTR_CPU_CYCLES == hwc->config_base) { if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) return -EAGAIN; @@ -579,12 +581,13 @@ armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, } } -static void -armv6pmu_disable_event(struct hw_perf_event *hwc, - int idx) +static void armv6pmu_disable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -613,12 +616,13 @@ armv6pmu_disable_event(struct hw_perf_event *hwc, raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, - int idx) +static void armv6mpcore_pmu_disable_event(struct perf_event *event) { unsigned long val, mask, flags, evt = 0; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -649,24 +653,22 @@ static int armv6_map_event(struct perf_event *event) &armv6_perf_cache_map, 0xFF); } -static struct arm_pmu armv6pmu = { - .name = "v6", - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6pmu_disable_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .map_event = armv6_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit armv6pmu_init(void) +static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu) { - return &armv6pmu; + cpu_pmu->name = "v6"; + cpu_pmu->handle_irq = armv6pmu_handle_irq; + cpu_pmu->enable = armv6pmu_enable_event; + cpu_pmu->disable = armv6pmu_disable_event; + cpu_pmu->read_counter = armv6pmu_read_counter; + cpu_pmu->write_counter = armv6pmu_write_counter; + cpu_pmu->get_event_idx = armv6pmu_get_event_idx; + cpu_pmu->start = armv6pmu_start; + cpu_pmu->stop = armv6pmu_stop; + cpu_pmu->map_event = armv6_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } /* @@ -683,33 +685,31 @@ static int armv6mpcore_map_event(struct perf_event *event) &armv6mpcore_perf_cache_map, 0xFF); } -static struct arm_pmu armv6mpcore_pmu = { - .name = "v6mpcore", - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6mpcore_pmu_disable_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .map_event = armv6mpcore_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) +static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { - return &armv6mpcore_pmu; + cpu_pmu->name = "v6mpcore"; + cpu_pmu->handle_irq = armv6pmu_handle_irq; + cpu_pmu->enable = armv6pmu_enable_event; + cpu_pmu->disable = armv6mpcore_pmu_disable_event; + cpu_pmu->read_counter = armv6pmu_read_counter; + cpu_pmu->write_counter = armv6pmu_write_counter; + cpu_pmu->get_event_idx = armv6pmu_get_event_idx; + cpu_pmu->start = armv6pmu_start; + cpu_pmu->stop = armv6pmu_stop; + cpu_pmu->map_event = armv6mpcore_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #else -static struct arm_pmu *__devinit armv6pmu_init(void) +static int armv6pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) +static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index bd4b090ebcfd..7d0cce85d17e 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -18,8 +18,6 @@ #ifdef CONFIG_CPU_V7 -static struct arm_pmu armv7pmu; - /* * Common ARMv7 event types * @@ -738,7 +736,8 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] */ #define ARMV7_IDX_CYCLE_COUNTER 0 #define ARMV7_IDX_COUNTER0 1 -#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) +#define ARMV7_IDX_COUNTER_LAST(cpu_pmu) \ + (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) #define ARMV7_MAX_COUNTERS 32 #define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1) @@ -804,49 +803,34 @@ static inline int armv7_pmnc_has_overflowed(u32 pmnc) return pmnc & ARMV7_OVERFLOWED_MASK; } -static inline int armv7_pmnc_counter_valid(int idx) +static inline int armv7_pmnc_counter_valid(struct arm_pmu *cpu_pmu, int idx) { - return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST; + return idx >= ARMV7_IDX_CYCLE_COUNTER && + idx <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); } static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx) { - int ret = 0; - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u checking wrong counter %d overflow status\n", - smp_processor_id(), idx); - } else { - counter = ARMV7_IDX_TO_COUNTER(idx); - ret = pmnc & BIT(counter); - } - - return ret; + return pmnc & BIT(ARMV7_IDX_TO_COUNTER(idx)); } static inline int armv7_pmnc_select_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u selecting wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter)); isb(); return idx; } -static inline u32 armv7pmu_read_counter(int idx) +static inline u32 armv7pmu_read_counter(struct perf_event *event) { + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; u32 value = 0; - if (!armv7_pmnc_counter_valid(idx)) + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) pr_err("CPU%u reading wrong counter %d\n", smp_processor_id(), idx); else if (idx == ARMV7_IDX_CYCLE_COUNTER) @@ -857,9 +841,13 @@ static inline u32 armv7pmu_read_counter(int idx) return value; } -static inline void armv7pmu_write_counter(int idx, u32 value) +static inline void armv7pmu_write_counter(struct perf_event *event, u32 value) { - if (!armv7_pmnc_counter_valid(idx)) + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) pr_err("CPU%u writing wrong counter %d\n", smp_processor_id(), idx); else if (idx == ARMV7_IDX_CYCLE_COUNTER) @@ -878,60 +866,28 @@ static inline void armv7_pmnc_write_evtsel(int idx, u32 val) static inline int armv7_pmnc_enable_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u enabling wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_disable_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u disabling wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_enable_intens(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_disable_intens(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); isb(); /* Clear the overflow flag in case an interrupt is pending. */ @@ -956,7 +912,7 @@ static inline u32 armv7_pmnc_getreset_flags(void) } #ifdef DEBUG -static void armv7_pmnc_dump_regs(void) +static void armv7_pmnc_dump_regs(struct arm_pmu *cpu_pmu) { u32 val; unsigned int cnt; @@ -981,7 +937,8 @@ static void armv7_pmnc_dump_regs(void) asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); printk(KERN_INFO "CCNT =0x%08x\n", val); - for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) { + for (cnt = ARMV7_IDX_COUNTER0; + cnt <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); cnt++) { armv7_pmnc_select_counter(cnt); asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); printk(KERN_INFO "CNT[%d] count =0x%08x\n", @@ -993,10 +950,19 @@ static void armv7_pmnc_dump_regs(void) } #endif -static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void armv7pmu_enable_event(struct perf_event *event) { unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { + pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return; + } /* * Enable counter and interrupt, and set the counter to count @@ -1014,7 +980,7 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) * We only need to set the event for the cycle counter if we * have the ability to perform event filtering. */ - if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) + if (cpu_pmu->set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) armv7_pmnc_write_evtsel(idx, hwc->config_base); /* @@ -1030,10 +996,19 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void armv7pmu_disable_event(struct perf_event *event) { unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { + pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return; + } /* * Disable counter and interrupt @@ -1057,7 +1032,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) { u32 pmnc; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -1077,7 +1053,6 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) */ regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -1094,13 +1069,13 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } /* @@ -1115,7 +1090,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void armv7pmu_start(void) +static void armv7pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -1126,7 +1101,7 @@ static void armv7pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void armv7pmu_stop(void) +static void armv7pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -1138,10 +1113,12 @@ static void armv7pmu_stop(void) } static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { int idx; - unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + unsigned long evtype = hwc->config_base & ARMV7_EVTYPE_EVENT; /* Always place a cycle counter into the cycle counter. */ if (evtype == ARMV7_PERFCTR_CPU_CYCLES) { @@ -1192,11 +1169,14 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event, static void armv7pmu_reset(void *info) { + struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; u32 idx, nb_cnt = cpu_pmu->num_events; /* The counter and interrupt enable registers are unknown at reset. */ - for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) - armv7pmu_disable_event(NULL, idx); + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { + armv7_pmnc_disable_counter(idx); + armv7_pmnc_disable_intens(idx); + } /* Initialize & Reset PMNC: C and P bits */ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); @@ -1232,17 +1212,18 @@ static int armv7_a7_map_event(struct perf_event *event) &armv7_a7_perf_cache_map, 0xFF); } -static struct arm_pmu armv7pmu = { - .handle_irq = armv7pmu_handle_irq, - .enable = armv7pmu_enable_event, - .disable = armv7pmu_disable_event, - .read_counter = armv7pmu_read_counter, - .write_counter = armv7pmu_write_counter, - .get_event_idx = armv7pmu_get_event_idx, - .start = armv7pmu_start, - .stop = armv7pmu_stop, - .reset = armv7pmu_reset, - .max_period = (1LLU << 32) - 1, +static void armv7pmu_init(struct arm_pmu *cpu_pmu) +{ + cpu_pmu->handle_irq = armv7pmu_handle_irq; + cpu_pmu->enable = armv7pmu_enable_event; + cpu_pmu->disable = armv7pmu_disable_event; + cpu_pmu->read_counter = armv7pmu_read_counter; + cpu_pmu->write_counter = armv7pmu_write_counter; + cpu_pmu->get_event_idx = armv7pmu_get_event_idx; + cpu_pmu->start = armv7pmu_start; + cpu_pmu->stop = armv7pmu_stop; + cpu_pmu->reset = armv7pmu_reset; + cpu_pmu->max_period = (1LLU << 32) - 1; }; static u32 __devinit armv7_read_num_pmnc_events(void) @@ -1256,70 +1237,75 @@ static u32 __devinit armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static struct arm_pmu *__devinit armv7_a8_pmu_init(void) +static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A8"; - armv7pmu.map_event = armv7_a8_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A8"; + cpu_pmu->map_event = armv7_a8_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a9_pmu_init(void) +static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A9"; - armv7pmu.map_event = armv7_a9_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A9"; + cpu_pmu->map_event = armv7_a9_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a5_pmu_init(void) +static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A5"; - armv7pmu.map_event = armv7_a5_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A5"; + cpu_pmu->map_event = armv7_a5_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a15_pmu_init(void) +static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A15"; - armv7pmu.map_event = armv7_a15_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - armv7pmu.set_event_filter = armv7pmu_set_event_filter; - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A15"; + cpu_pmu->map_event = armv7_a15_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + return 0; } -static struct arm_pmu *__devinit armv7_a7_pmu_init(void) +static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A7"; - armv7pmu.map_event = armv7_a7_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - armv7pmu.set_event_filter = armv7pmu_set_event_filter; - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A7"; + cpu_pmu->map_event = armv7_a7_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + return 0; } #else -static struct arm_pmu *__devinit armv7_a8_pmu_init(void) +static inline int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a9_pmu_init(void) +static inline int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a5_pmu_init(void) +static inline int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a15_pmu_init(void) +static inline int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a7_pmu_init(void) +static inline int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 426e19f380a2..0c8265e53d5f 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -224,7 +224,8 @@ xscale1pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -248,7 +249,6 @@ xscale1pmu_handle_irq(int irq_num, void *dev) regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -260,13 +260,13 @@ xscale1pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } irq_work_run(); @@ -280,11 +280,13 @@ xscale1pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void -xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void xscale1pmu_enable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -314,11 +316,13 @@ xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void xscale1pmu_disable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -348,9 +352,10 @@ xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) static int xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { - if (XSCALE_PERFCTR_CCNT == event->config_base) { + struct hw_perf_event *hwc = &event->hw; + if (XSCALE_PERFCTR_CCNT == hwc->config_base) { if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) return -EAGAIN; @@ -366,8 +371,7 @@ xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, } } -static void -xscale1pmu_start(void) +static void xscale1pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -379,8 +383,7 @@ xscale1pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale1pmu_stop(void) +static void xscale1pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -392,9 +395,10 @@ xscale1pmu_stop(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static inline u32 -xscale1pmu_read_counter(int counter) +static inline u32 xscale1pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; u32 val = 0; switch (counter) { @@ -412,9 +416,11 @@ xscale1pmu_read_counter(int counter) return val; } -static inline void -xscale1pmu_write_counter(int counter, u32 val) +static inline void xscale1pmu_write_counter(struct perf_event *event, u32 val) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + switch (counter) { case XSCALE_CYCLE_COUNTER: asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); @@ -434,24 +440,22 @@ static int xscale_map_event(struct perf_event *event) &xscale_perf_cache_map, 0xFF); } -static struct arm_pmu xscale1pmu = { - .name = "xscale1", - .handle_irq = xscale1pmu_handle_irq, - .enable = xscale1pmu_enable_event, - .disable = xscale1pmu_disable_event, - .read_counter = xscale1pmu_read_counter, - .write_counter = xscale1pmu_write_counter, - .get_event_idx = xscale1pmu_get_event_idx, - .start = xscale1pmu_start, - .stop = xscale1pmu_stop, - .map_event = xscale_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit xscale1pmu_init(void) +static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu) { - return &xscale1pmu; + cpu_pmu->name = "xscale1"; + cpu_pmu->handle_irq = xscale1pmu_handle_irq; + cpu_pmu->enable = xscale1pmu_enable_event; + cpu_pmu->disable = xscale1pmu_disable_event; + cpu_pmu->read_counter = xscale1pmu_read_counter; + cpu_pmu->write_counter = xscale1pmu_write_counter; + cpu_pmu->get_event_idx = xscale1pmu_get_event_idx; + cpu_pmu->start = xscale1pmu_start; + cpu_pmu->stop = xscale1pmu_stop; + cpu_pmu->map_event = xscale_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #define XSCALE2_OVERFLOWED_MASK 0x01f @@ -567,7 +571,8 @@ xscale2pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc, of_flags; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -585,7 +590,6 @@ xscale2pmu_handle_irq(int irq_num, void *dev) regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -597,13 +601,13 @@ xscale2pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } irq_work_run(); @@ -617,11 +621,13 @@ xscale2pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void -xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void xscale2pmu_enable_event(struct perf_event *event) { unsigned long flags, ien, evtsel; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -661,11 +667,13 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void xscale2pmu_disable_event(struct perf_event *event) { unsigned long flags, ien, evtsel, of_flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -713,7 +721,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) static int xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { int idx = xscale1pmu_get_event_idx(cpuc, event); if (idx >= 0) @@ -727,8 +735,7 @@ out: return idx; } -static void -xscale2pmu_start(void) +static void xscale2pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -740,8 +747,7 @@ xscale2pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale2pmu_stop(void) +static void xscale2pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -753,9 +759,10 @@ xscale2pmu_stop(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static inline u32 -xscale2pmu_read_counter(int counter) +static inline u32 xscale2pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; u32 val = 0; switch (counter) { @@ -779,9 +786,11 @@ xscale2pmu_read_counter(int counter) return val; } -static inline void -xscale2pmu_write_counter(int counter, u32 val) +static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + switch (counter) { case XSCALE_CYCLE_COUNTER: asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); @@ -801,33 +810,31 @@ xscale2pmu_write_counter(int counter, u32 val) } } -static struct arm_pmu xscale2pmu = { - .name = "xscale2", - .handle_irq = xscale2pmu_handle_irq, - .enable = xscale2pmu_enable_event, - .disable = xscale2pmu_disable_event, - .read_counter = xscale2pmu_read_counter, - .write_counter = xscale2pmu_write_counter, - .get_event_idx = xscale2pmu_get_event_idx, - .start = xscale2pmu_start, - .stop = xscale2pmu_stop, - .map_event = xscale_map_event, - .num_events = 5, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit xscale2pmu_init(void) +static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu) { - return &xscale2pmu; + cpu_pmu->name = "xscale2"; + cpu_pmu->handle_irq = xscale2pmu_handle_irq; + cpu_pmu->enable = xscale2pmu_enable_event; + cpu_pmu->disable = xscale2pmu_disable_event; + cpu_pmu->read_counter = xscale2pmu_read_counter; + cpu_pmu->write_counter = xscale2pmu_write_counter; + cpu_pmu->get_event_idx = xscale2pmu_get_event_idx; + cpu_pmu->start = xscale2pmu_start; + cpu_pmu->stop = xscale2pmu_stop; + cpu_pmu->map_event = xscale_map_event; + cpu_pmu->num_events = 5; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #else -static struct arm_pmu *__devinit xscale1pmu_init(void) +static inline int xscale1pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit xscale2pmu_init(void) +static inline int xscale2pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_XSCALE */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 9800338c5d1b..c6dec5fc20aa 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -34,6 +34,7 @@ #include <linux/leds.h> #include <asm/cacheflush.h> +#include <asm/idmap.h> #include <asm/processor.h> #include <asm/thread_notify.h> #include <asm/stacktrace.h> @@ -56,8 +57,6 @@ static const char *isa_modes[] = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -extern void setup_mm_for_reboot(void); - static volatile int hlt_counter; void disable_hlt(void) @@ -70,6 +69,7 @@ EXPORT_SYMBOL(disable_hlt); void enable_hlt(void) { hlt_counter--; + BUG_ON(hlt_counter < 0); } EXPORT_SYMBOL(enable_hlt); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 739db3a1b2d2..03deeffd9f6d 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -916,16 +916,11 @@ enum ptrace_syscall_dir { PTRACE_SYSCALL_EXIT, }; -static int ptrace_syscall_trace(struct pt_regs *regs, int scno, - enum ptrace_syscall_dir dir) +static int tracehook_report_syscall(struct pt_regs *regs, + enum ptrace_syscall_dir dir) { unsigned long ip; - current_thread_info()->syscall = scno; - - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return scno; - /* * IP is used to denote syscall entry/exit: * IP = 0 -> entry, =1 -> exit @@ -944,19 +939,41 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) { - scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + current_thread_info()->syscall = scno; + + /* Do the secure computing check first; failures should be fast. */ + if (secure_computing(scno) == -1) + return -1; + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, scno); + audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); + return scno; } -asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno) +asmlinkage void syscall_trace_exit(struct pt_regs *regs) { - scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); - if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) - trace_sys_exit(regs, scno); + /* + * Audit the syscall before anything else, as a debugger may + * come in and change the current registers. + */ audit_syscall_exit(regs); - return scno; + + /* + * Note that we haven't updated the ->syscall field for the + * current thread. This isn't a problem because it will have + * been set on syscall entry and there hasn't been an opportunity + * for a PTRACE_SET_SYSCALL since then. + */ + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_exit(regs, regs_return_value(regs)); + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index da1d1aa20ad9..9a89bf4aefe1 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -383,6 +383,12 @@ void cpu_init(void) BUG(); } + /* + * This only works on resume and secondary cores. For booting on the + * boot cpu, smp_prepare_boot_cpu is called after percpu area setup. + */ + set_my_cpu_offset(per_cpu_offset(cpu)); + cpu_proc_init(); /* @@ -426,13 +432,14 @@ int __cpu_logical_map[NR_CPUS]; void __init smp_setup_processor_id(void) { int i; - u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; + u32 cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cpu_logical_map(0) = cpu; - for (i = 1; i < NR_CPUS; ++i) + for (i = 1; i < nr_cpu_ids; ++i) cpu_logical_map(i) = i == cpu ? 0 : i; - printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); + printk(KERN_INFO "Booting Linux on physical CPU 0x%x\n", mpidr); } static void __init setup_processor(void) @@ -758,6 +765,7 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); + arm_dt_init_cpu_maps(); #ifdef CONFIG_SMP if (is_smp()) { smp_set_ops(mdesc->smp); @@ -841,12 +849,9 @@ static const char *hwcap_str[] = { static int c_show(struct seq_file *m, void *v) { - int i; + int i, j; + u32 cpuid; - seq_printf(m, "Processor\t: %s rev %d (%s)\n", - cpu_name, read_cpuid_id() & 15, elf_platform); - -#if defined(CONFIG_SMP) for_each_online_cpu(i) { /* * glibc reads /proc/cpuinfo to determine the number of @@ -854,45 +859,48 @@ static int c_show(struct seq_file *m, void *v) * "processor". Give glibc what it expects. */ seq_printf(m, "processor\t: %d\n", i); - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n", + cpuid = is_smp() ? per_cpu(cpu_data, i).cpuid : read_cpuid_id(); + seq_printf(m, "model name\t: %s rev %d (%s)\n", + cpu_name, cpuid & 15, elf_platform); + +#if defined(CONFIG_SMP) + seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ), (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100); - } -#else /* CONFIG_SMP */ - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", - loops_per_jiffy / (500000/HZ), - (loops_per_jiffy / (5000/HZ)) % 100); +#else + seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", + loops_per_jiffy / (500000/HZ), + (loops_per_jiffy / (5000/HZ)) % 100); #endif + /* dump out the processor features */ + seq_puts(m, "Features\t: "); - /* dump out the processor features */ - seq_puts(m, "Features\t: "); - - for (i = 0; hwcap_str[i]; i++) - if (elf_hwcap & (1 << i)) - seq_printf(m, "%s ", hwcap_str[i]); + for (j = 0; hwcap_str[j]; j++) + if (elf_hwcap & (1 << j)) + seq_printf(m, "%s ", hwcap_str[j]); - seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24); - seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]); + seq_printf(m, "\nCPU implementer\t: 0x%02x\n", cpuid >> 24); + seq_printf(m, "CPU architecture: %s\n", + proc_arch[cpu_architecture()]); - if ((read_cpuid_id() & 0x0008f000) == 0x00000000) { - /* pre-ARM7 */ - seq_printf(m, "CPU part\t: %07x\n", read_cpuid_id() >> 4); - } else { - if ((read_cpuid_id() & 0x0008f000) == 0x00007000) { - /* ARM7 */ - seq_printf(m, "CPU variant\t: 0x%02x\n", - (read_cpuid_id() >> 16) & 127); + if ((cpuid & 0x0008f000) == 0x00000000) { + /* pre-ARM7 */ + seq_printf(m, "CPU part\t: %07x\n", cpuid >> 4); } else { - /* post-ARM7 */ - seq_printf(m, "CPU variant\t: 0x%x\n", - (read_cpuid_id() >> 20) & 15); + if ((cpuid & 0x0008f000) == 0x00007000) { + /* ARM7 */ + seq_printf(m, "CPU variant\t: 0x%02x\n", + (cpuid >> 16) & 127); + } else { + /* post-ARM7 */ + seq_printf(m, "CPU variant\t: 0x%x\n", + (cpuid >> 20) & 15); + } + seq_printf(m, "CPU part\t: 0x%03x\n", + (cpuid >> 4) & 0xfff); } - seq_printf(m, "CPU part\t: 0x%03x\n", - (read_cpuid_id() >> 4) & 0xfff); + seq_printf(m, "CPU revision\t: %d\n\n", cpuid & 15); } - seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15); - - seq_puts(m, "\n"); seq_printf(m, "Hardware\t: %s\n", machine_name); seq_printf(m, "Revision\t: %04x\n", system_rev); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index fbc8b2623d82..84f4cbf652e5 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -281,6 +281,7 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); cpu_info->loops_per_jiffy = loops_per_jiffy; + cpu_info->cpuid = read_cpuid_id(); store_cpu_topology(cpuid); } @@ -313,9 +314,10 @@ asmlinkage void __cpuinit secondary_start_kernel(void) current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); + cpu_init(); + printk("CPU%u: Booted secondary processor\n", cpu); - cpu_init(); preempt_disable(); trace_hardirqs_off(); @@ -371,6 +373,7 @@ void __init smp_cpus_done(unsigned int max_cpus) void __init smp_prepare_boot_cpu(void) { + set_my_cpu_offset(per_cpu_offset(smp_processor_id())); } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -421,6 +424,11 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask) smp_cross_call(mask, IPI_CALL_FUNC); } +void arch_send_wakeup_ipi_mask(const struct cpumask *mask) +{ + smp_cross_call(mask, IPI_WAKEUP); +} + void arch_send_call_function_single_ipi(int cpu) { smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); @@ -443,7 +451,7 @@ void show_ipi_list(struct seq_file *p, int prec) for (i = 0; i < NR_IPI; i++) { seq_printf(p, "%*s%u: ", prec - 1, "IPI", i); - for_each_present_cpu(cpu) + for_each_online_cpu(cpu) seq_printf(p, "%10u ", __get_irq_stat(cpu, ipi_irqs[i])); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index b22d700fea27..49f335d301ba 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -31,6 +31,8 @@ static void __iomem *twd_base; static struct clk *twd_clk; static unsigned long twd_timer_rate; +static bool common_setup_called; +static DEFINE_PER_CPU(bool, percpu_setup_called); static struct clock_event_device __percpu **twd_evt; static int twd_ppi; @@ -248,17 +250,9 @@ static struct clk *twd_get_clock(void) return clk; } - err = clk_prepare(clk); + err = clk_prepare_enable(clk); if (err) { - pr_err("smp_twd: clock failed to prepare: %d\n", err); - clk_put(clk); - return ERR_PTR(err); - } - - err = clk_enable(clk); - if (err) { - pr_err("smp_twd: clock failed to enable: %d\n", err); - clk_unprepare(clk); + pr_err("smp_twd: clock failed to prepare+enable: %d\n", err); clk_put(clk); return ERR_PTR(err); } @@ -272,15 +266,45 @@ static struct clk *twd_get_clock(void) static int __cpuinit twd_timer_setup(struct clock_event_device *clk) { struct clock_event_device **this_cpu_clk; + int cpu = smp_processor_id(); + + /* + * If the basic setup for this CPU has been done before don't + * bother with the below. + */ + if (per_cpu(percpu_setup_called, cpu)) { + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + clockevents_register_device(*__this_cpu_ptr(twd_evt)); + enable_percpu_irq(clk->irq, 0); + return 0; + } + per_cpu(percpu_setup_called, cpu) = true; - if (!twd_clk) + /* + * This stuff only need to be done once for the entire TWD cluster + * during the runtime of the system. + */ + if (!common_setup_called) { twd_clk = twd_get_clock(); - if (!IS_ERR_OR_NULL(twd_clk)) - twd_timer_rate = clk_get_rate(twd_clk); - else - twd_calibrate_rate(); + /* + * We use IS_ERR_OR_NULL() here, because if the clock stubs + * are active we will get a valid clk reference which is + * however NULL and will return the rate 0. In that case we + * need to calibrate the rate instead. + */ + if (!IS_ERR_OR_NULL(twd_clk)) + twd_timer_rate = clk_get_rate(twd_clk); + else + twd_calibrate_rate(); + + common_setup_called = true; + } + /* + * The following is done once per CPU the first time .setup() is + * called. + */ __raw_writel(0, twd_base + TWD_TIMER_CONTROL); clk->name = "local_timer"; @@ -366,10 +390,8 @@ void __init twd_local_timer_of_register(void) int err; np = of_find_matching_node(NULL, twd_of_match); - if (!np) { - err = -ENODEV; - goto out; - } + if (!np) + return; twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 26c12c6440fc..79282ebcd939 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -196,32 +196,7 @@ static inline void parse_dt_topology(void) {} static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} #endif - -/* - * cpu topology management - */ - -#define MPIDR_SMP_BITMASK (0x3 << 30) -#define MPIDR_SMP_VALUE (0x2 << 30) - -#define MPIDR_MT_BITMASK (0x1 << 24) - -/* - * These masks reflect the current use of the affinity levels. - * The affinity level can be up to 16 bits according to ARM ARM - */ -#define MPIDR_HWID_BITMASK 0xFFFFFF - -#define MPIDR_LEVEL0_MASK 0x3 -#define MPIDR_LEVEL0_SHIFT 0 - -#define MPIDR_LEVEL1_MASK 0xF -#define MPIDR_LEVEL1_SHIFT 8 - -#define MPIDR_LEVEL2_MASK 0xFF -#define MPIDR_LEVEL2_SHIFT 16 - -/* + /* * cpu topology table */ struct cputopo_arm cpu_topology[NR_CPUS]; @@ -282,19 +257,14 @@ void store_cpu_topology(unsigned int cpuid) if (mpidr & MPIDR_MT_BITMASK) { /* core performance interdependency */ - cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT) - & MPIDR_LEVEL0_MASK; - cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT) - & MPIDR_LEVEL1_MASK; - cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT) - & MPIDR_LEVEL2_MASK; + cpuid_topo->thread_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpuid_topo->socket_id = MPIDR_AFFINITY_LEVEL(mpidr, 2); } else { /* largely independent cores */ cpuid_topo->thread_id = -1; - cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT) - & MPIDR_LEVEL0_MASK; - cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT) - & MPIDR_LEVEL1_MASK; + cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cpuid_topo->socket_id = MPIDR_AFFINITY_LEVEL(mpidr, 1); } } else { /* diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 36ff15bbfdd4..b9f38e388b43 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -114,6 +114,15 @@ SECTIONS RO_DATA(PAGE_SIZE) + . = ALIGN(4); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; +#ifdef CONFIG_MMU + *(__ex_table) +#endif + __stop___ex_table = .; + } + #ifdef CONFIG_ARM_UNWIND /* * Stack unwinding tables @@ -220,16 +229,6 @@ SECTIONS READ_MOSTLY_DATA(L1_CACHE_BYTES) /* - * The exception fixup table (might need resorting at runtime) - */ - . = ALIGN(4); - __start___ex_table = .; -#ifdef CONFIG_MMU - *(__ex_table) -#endif - __stop___ex_table = .; - - /* * and the usual data section */ DATA_DATA diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 043624219b55..e34c1bdb804d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -494,8 +494,17 @@ endif comment "Generic Board Type" +config MACH_AT91RM9200_DT + bool "Atmel AT91RM9200 Evaluation Kits with device-tree support" + depends on SOC_AT91RM9200 + select USE_OF + help + Select this if you want to experiment device-tree with + an Atmel RM9200 Evaluation Kit. + config MACH_AT91SAM_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" + depends on SOC_AT91SAM9 select USE_OF help Select this if you want to experiment device-tree with diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 3bb7a51efc9d..b38a1dcb79b8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree +obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o # AT91X40 board-specific support diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/at91_aic.h index eaea66197fa1..eaea66197fa1 100644 --- a/arch/arm/mach-at91/include/mach/at91_aic.h +++ b/arch/arm/mach-at91/at91_aic.h diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h index 875fa336800b..875fa336800b 100644 --- a/arch/arm/mach-at91/include/mach/at91_rstc.h +++ b/arch/arm/mach-at91/at91_rstc.h diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h index 60478ea8bd46..60478ea8bd46 100644 --- a/arch/arm/mach-at91/include/mach/at91_shdwc.h +++ b/arch/arm/mach-at91/at91_shdwc.h diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/at91_tc.h index 46a317fd7164..46a317fd7164 100644 --- a/arch/arm/mach-at91/include/mach/at91_tc.h +++ b/arch/arm/mach-at91/at91_tc.h diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 5269825194a8..8ce068240c69 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -17,11 +17,11 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91rm9200.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -194,6 +194,24 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), CLKDEV_CON_ID("pioD", &pioD_clk), + /* usart lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk), + /* tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -361,10 +379,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -struct at91_init_soc __initdata at91rm9200_soc = { +AT91_SOC_START(rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, .ioremap_registers = at91rm9200_ioremap_registers, .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 3cee0e6ea7c3..2a1f8e67683d 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -18,11 +18,11 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> -#include <mach/board.h> #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index aaa443b48c91..cafe98836c8a 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -24,6 +24,9 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/export.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -91,7 +94,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91rm9200_timer_interrupt + .handler = at91rm9200_timer_interrupt, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static cycle_t read_clk32k(struct clocksource *cs) @@ -179,8 +183,60 @@ static struct clock_event_device clkevt = { void __iomem *at91_st_base; EXPORT_SYMBOL_GPL(at91_st_base); +#ifdef CONFIG_OF +static struct of_device_id at91rm9200_st_timer_ids[] = { + { .compatible = "atmel,at91rm9200-st" }, + { /* sentinel */ } +}; + +static int __init of_at91rm9200_st_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (!np) + goto err; + + at91_st_base = of_iomap(np, 0); + if (!at91_st_base) + goto node_err; + + /* Get the interrupts property */ + ret = irq_of_parse_and_map(np, 0); + if (!ret) + goto ioremap_err; + at91rm9200_timer_irq.irq = ret; + + of_node_put(np); + + return 0; + +ioremap_err: + iounmap(at91_st_base); +node_err: + of_node_put(np); +err: + return -EINVAL; +} +#else +static int __init of_at91rm9200_st_init(void) +{ + return -EINVAL; +} +#endif + void __init at91rm9200_ioremap_st(u32 addr) { +#ifdef CONFIG_OF + struct device_node *np; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (np) { + of_node_put(np); + return; + } +#endif at91_st_base = ioremap(addr, 256); if (!at91_st_base) panic("Impossible to ioremap ST\n"); @@ -191,13 +247,16 @@ void __init at91rm9200_ioremap_st(u32 addr) */ void __init at91rm9200_timer_init(void) { + /* For device tree enabled device: initialize here */ + of_at91rm9200_st_init(); + /* Disable all timer interrupts, and clear any pending ones */ at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index f8202615f4a8..c65e7b8d7a81 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -20,10 +20,10 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -230,11 +230,15 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -390,10 +394,10 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9260_soc = { +AT91_SOC_START(sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, .init = at91sam9260_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 414bd855fb0c..1f6fac21b2c8 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -19,7 +19,6 @@ #include <linux/platform_data/at91_adc.h> -#include <mach/board.h> #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> @@ -27,6 +26,7 @@ #include <mach/at91sam9_smc.h> #include <mach/at91_adc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 04295c04b3e0..9d3e9b8b9926 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -19,10 +19,10 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -334,10 +334,10 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9261_soc = { +AT91_SOC_START(sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, .init = at91sam9261_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index cd604aad8e96..6ce6d27e2442 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -21,12 +21,12 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9261.h> #include <mach/at91sam9261_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index d6f9c23927c4..82deb4d748b2 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -211,7 +211,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -365,10 +372,10 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -struct at91_init_soc __initdata at91sam9263_soc = { +AT91_SOC_START(sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, .init = at91sam9263_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 9c61e59a2104..fb98163b9b3a 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -20,12 +20,12 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index ffc0957d7623..358412f1f5f8 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -20,8 +20,18 @@ #include <asm/mach/time.h> -#include <mach/at91_pit.h> - +#define AT91_PIT_MR 0x00 /* Mode Register */ +#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ +#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ +#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ + +#define AT91_PIT_SR 0x04 /* Status Register */ +#define AT91_PIT_PITS (1 << 0) /* Timer Status */ + +#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ +#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ +#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index 7af2e108b8a0..f039538d3bdb 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -16,7 +16,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> #include <mach/at91_ramc.h> -#include <mach/at91_rstc.h> +#include "at91_rstc.h" .arm diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 84af1b506d92..45d753d473f6 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9g45.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -256,10 +256,18 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), @@ -343,7 +351,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { static void __init at91sam9g45_map_io(void) { at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); - init_consistent_dma_size(SZ_4M); } static void __init at91sam9g45_ioremap_registers(void) @@ -409,10 +416,10 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -struct at91_init_soc __initdata at91sam9g45_soc = { +AT91_SOC_START(sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, .init = at91sam9g45_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index fcd233cb33d2..e35964201a10 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -26,7 +26,6 @@ #include <video/atmel_lcdc.h> #include <mach/at91_adc.h> -#include <mach/board.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> @@ -36,6 +35,7 @@ #include <media/atmel-isi.h> +#include "board.h" #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 9d457182c86c..721a1a34dd1d 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -13,8 +13,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> #include <mach/at91_ramc.h> -#include <mach/at91_rstc.h> - +#include "at91_rstc.h" .arm .globl at91sam9g45_restart diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 732d3d3f4ec5..5dfc8fd87103 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -15,8 +15,8 @@ #include <mach/at91sam9n12.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> -#include <mach/board.h> +#include "board.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -168,13 +168,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), @@ -223,13 +224,10 @@ static void __init at91sam9n12_map_io(void) void __init at91sam9n12_initialize(void) { at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); - - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); } -struct at91_init_soc __initdata at91sam9n12_soc = { +AT91_SOC_START(sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, .init = at91sam9n12_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 72e908412222..44e3a633fda7 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -19,10 +19,10 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -338,10 +338,10 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9rl_soc = { +AT91_SOC_START(sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, .ioremap_registers = at91sam9rl_ioremap_registers, .register_clocks = at91sam9rl_register_clocks, .init = at91sam9rl_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 5047bdc92adf..160384d93db2 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -17,13 +17,13 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9rl.h> #include <mach/at91sam9rl_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <linux/platform_data/dma-atmel.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e5035380dcbc..dfb2c0c13fb5 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -15,8 +15,8 @@ #include <mach/at91sam9x5.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> -#include <mach/board.h> +#include "board.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -229,15 +229,17 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), @@ -313,18 +315,11 @@ static void __init at91sam9x5_map_io(void) at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); } -void __init at91sam9x5_initialize(void) -{ - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); -} - /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -struct at91_init_soc __initdata at91sam9x5_soc = { +AT91_SOC_START(sam9x5) .map_io = at91sam9x5_map_io, .register_clocks = at91sam9x5_register_clocks, - .init = at91sam9x5_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index bb7f54474b92..19ca79396905 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -18,9 +18,10 @@ #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> -#include <mach/at91_aic.h> #include <mach/at91_st.h> #include <mach/timex.h> + +#include "at91_aic.h" #include "generic.h" /* diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index ee06d7bcdf76..0e57e440c061 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -26,7 +26,8 @@ #include <linux/io.h> #include <mach/hardware.h> #include <asm/mach/time.h> -#include <mach/at91_tc.h> + +#include "at91_tc.h" #define at91_tc_read(field) \ __raw_readl(AT91_IO_P2V(AT91_TC) + field) diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 22d8856094f1..b99b5752cc10 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -34,10 +34,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 93a832f70232..854b97974287 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -43,9 +43,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 477e708497bc..28a18ce6d914 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -38,10 +38,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 71d8f362a1d5..c17bb533a949 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -35,9 +35,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index e71c473316e3..847432441ecc 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -40,12 +40,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2cbd1a2b6c35..2a7af7868747 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -36,12 +36,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static struct gpio_led cpuat91_leds[] = { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 3e37437a7a61..78e025074423 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -38,9 +38,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 872871ab1160..ec0f3abd504b 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -35,9 +35,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index e8f45c4e0ea8..881170ce61dd 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -15,23 +15,20 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - #include <asm/setup.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static const struct of_device_id irq_of_match[] __initconst = { { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup }, - { .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup }, { /*sentinel*/ } }; diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index 01f66e99ece7..b489388a6f84 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -27,8 +27,9 @@ #include <mach/hardware.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/at91_aic.h> + +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init at91eb01_init_irq(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 0cfac16ee9d5..9f5e71c95f05 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -35,9 +35,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 3d931ffac4bf..ef69e0ebe949 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -37,10 +37,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index d93658a2b128..50f3d3795c05 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -24,12 +24,12 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init eco920_init_early(void) diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index fa98abacb1ba..5d44eba0f20f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -33,9 +33,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init flexibity_init_early(void) diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 6e47071d8206..191d37c16bab 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -41,10 +41,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index a9d5e78118c5..23a2fa17ab29 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -30,14 +30,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/gsia18s.h> -#include <mach/stamp9g20.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gsia18s.h" +#include "stamp9g20.h" static void __init gsia18s_init_early(void) { diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 86050da3ba53..9a43d1e1a037 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -34,10 +34,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index abe9fed7a3e0..f168bec2369f 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -35,12 +35,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 6960778af4c2..bc7a1c4a1f6a 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -44,10 +44,10 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 9ca3e32c54cb..0299554495dd 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -29,13 +29,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/stamp9g20.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "stamp9g20.h" static void __init pcontrol_g20_init_early(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index f83e1de699e6..4938f1cd5e13 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -37,11 +37,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 799f214edebe..33b1628467ea 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -40,11 +40,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c new file mode 100644 index 000000000000..5f9ce3da3fde --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200-dt.c @@ -0,0 +1,57 @@ +/* + * Setup code for AT91RM9200 Evaluation Kits with Device Tree support + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "at91_aic.h" +#include "generic.h" + + +static const struct of_device_id irq_of_match[] __initconst = { + { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, + { /*sentinel*/ } +}; + +static void __init at91rm9200_dt_init_irq(void) +{ + of_irq_init(irq_of_match); +} + +static void __init at91rm9200_dt_device_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *at91rm9200_dt_board_compat[] __initdata = { + "atmel,at91rm9200", + NULL +}; + +DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") + .timer = &at91rm9200_timer, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = at91rm9200_dt_initialize, + .init_irq = at91rm9200_dt_init_irq, + .init_machine = at91rm9200_dt_device_init, + .dt_compat = at91rm9200_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 66338e7ebfba..9e5061bef0d0 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -39,11 +39,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 5d1b5729dc69..58277dbc718f 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -39,11 +39,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index a0ecf04e9ae3..2e8b8339a206 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -25,11 +25,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <linux/gpio.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init rsi_ews_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index c5f01acce3c0..b75fbf6003a1 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -37,10 +37,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 8cd6e679fbe0..f0135cd1d858 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -41,12 +41,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index a9167dd45f96..13ebaa8e4100 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -45,12 +45,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index b87dbe2be0d6..89b9608742a7 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -44,12 +44,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 3ab2b86a3762..7b5123802368 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,11 +43,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 3d48ec154685..e4cc375e3a32 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -42,12 +42,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index fb89ea92e3f2..377a1097afa7 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -30,11 +30,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> + +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index a4e031a039fd..98771500ddb9 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -32,10 +32,10 @@ #include <asm/mach/arch.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index c3fb31d5116e..48a962b61fa3 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -25,10 +25,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 6ea069b57335..c1060f96e589 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -41,11 +41,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index f162fdfd66eb..8673aebcb85d 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -43,12 +43,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/board.h index c55a4364ffb4..4a234fb2ab3b 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/board.h @@ -31,71 +31,24 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H -#include <linux/mtd/partitions.h> -#include <linux/device.h> -#include <linux/i2c.h> -#include <linux/leds.h> -#include <linux/spi/spi.h> -#include <linux/usb/atmel_usba_udc.h> -#include <linux/atmel-mci.h> -#include <sound/atmel-ac97c.h> -#include <linux/serial.h> -#include <linux/platform_data/macb.h> #include <linux/platform_data/atmel.h> /* USB Device */ -struct at91_udc_data { - int vbus_pin; /* high == host powering us */ - u8 vbus_active_low; /* vbus polarity */ - u8 vbus_polled; /* Use polling, not interrupt */ - int pullup_pin; /* active == D+ pulled up */ - u8 pullup_active_low; /* true == pullup_pin is active low */ -}; extern void __init at91_add_device_udc(struct at91_udc_data *data); /* USB High Speed Device */ extern void __init at91_add_device_usba(struct usba_platform_data *data); /* Compact Flash */ -struct at91_cf_data { - int irq_pin; /* I/O IRQ */ - int det_pin; /* Card detect */ - int vcc_pin; /* power switching */ - int rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ - u8 flags; -#define AT91_CF_TRUE_IDE 0x01 -#define AT91_IDE_SWAP_A0_A2 0x02 -}; extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ - /* at91_mci platform config */ -struct at91_mmc_data { - int det_pin; /* card detect IRQ */ - unsigned slot_b:1; /* uses Slot B */ - unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ - int wp_pin; /* (SD) writeprotect detect */ - int vcc_pin; /* power switching (high == on) */ -}; -extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - /* atmel-mci platform config */ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ -#define AT91_MAX_USBH_PORTS 3 -struct at91_usbh_data { - int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ - int overcurrent_pin[AT91_MAX_USBH_PORTS]; - u8 ports; /* number of ports on root hub */ - u8 overcurrent_supported; - u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; - u8 overcurrent_status[AT91_MAX_USBH_PORTS]; - u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; -}; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); @@ -124,13 +77,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin extern struct platform_device *atmel_default_console_device; -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; extern void __init at91_add_device_serial(void); /* @@ -173,24 +119,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); /* Touchscreen Controller */ -struct at91_tsadcc_data { - unsigned int adc_clock; - u8 pendet_debounce; - u8 ts_sample_hold_time; -}; extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ -struct at91_can_data { - void (*transceiver_switch)(int on); -}; extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); -/* FIXME: this needs a better location, but gets stuff building again */ -extern int at91_suspend_entering_slow_clock(void); - #endif diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index b62f560e6c75..fc593d615e7d 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base, extern void __init at91rm9200_set_type(int type); extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91rm9200_dt_initialize(void); extern void __init at91_dt_initialize(void); /* Interrupts */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index be42cf0e74bd..c5d7e1e9d757 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -23,8 +23,6 @@ #include <linux/io.h> #include <linux/irqdomain.h> #include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_gpio.h> #include <asm/mach/irq.h> @@ -33,6 +31,8 @@ #include "generic.h" +#define MAX_NB_GPIO_PER_BANK 32 + struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ @@ -46,6 +46,7 @@ struct at91_gpio_chip { #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); @@ -55,26 +56,27 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); -#define AT91_GPIO_CHIP(name, nr_gpio) \ +#define AT91_GPIO_CHIP(name) \ { \ .chip = { \ .label = name, \ + .request = at91_gpiolib_request, \ .direction_input = at91_gpiolib_direction_input, \ .direction_output = at91_gpiolib_direction_output, \ .get = at91_gpiolib_get, \ .set = at91_gpiolib_set, \ .dbg_show = at91_gpiolib_dbg_show, \ .to_irq = at91_gpiolib_to_irq, \ - .ngpio = nr_gpio, \ + .ngpio = MAX_NB_GPIO_PER_BANK, \ }, \ } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA", 32), - AT91_GPIO_CHIP("pioB", 32), - AT91_GPIO_CHIP("pioC", 32), - AT91_GPIO_CHIP("pioD", 32), - AT91_GPIO_CHIP("pioE", 32), + AT91_GPIO_CHIP("pioA"), + AT91_GPIO_CHIP("pioB"), + AT91_GPIO_CHIP("pioC"), + AT91_GPIO_CHIP("pioD"), + AT91_GPIO_CHIP("pioE"), }; static int gpio_banks; @@ -89,7 +91,7 @@ static unsigned long at91_gpio_caps; static inline void __iomem *pin_to_controller(unsigned pin) { - pin /= 32; + pin /= MAX_NB_GPIO_PER_BANK; if (likely(pin < gpio_banks)) return gpio_chip[pin].regbase; @@ -98,7 +100,7 @@ static inline void __iomem *pin_to_controller(unsigned pin) static inline unsigned pin_to_mask(unsigned pin) { - return 1 << (pin % 32); + return 1 << (pin % MAX_NB_GPIO_PER_BANK); } @@ -713,80 +715,6 @@ postcore_initcall(at91_gpio_debugfs_init); */ static struct lock_class_key gpio_lock_class; -#if defined(CONFIG_OF) -static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct at91_gpio_chip *at91_gpio = h->host_data; - - irq_set_lockdep_class(virq, &gpio_lock_class); - - /* - * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interrupts sanely. - */ - irq_set_chip_and_handler(virq, &gpio_irqchip, - handle_simple_irq); - set_irq_flags(virq, IRQF_VALID); - irq_set_chip_data(virq, at91_gpio); - - return 0; -} - -static struct irq_domain_ops at91_gpio_ops = { - .map = at91_gpio_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - struct at91_gpio_chip *prev = NULL; - int alias_idx = of_alias_get_id(node, "gpio"); - struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx]; - - /* Setup proper .irq_set_type function */ - if (has_pio3()) - gpio_irqchip.irq_set_type = alt_gpio_irq_type; - else - gpio_irqchip.irq_set_type = gpio_irq_type; - - /* Disable irqs of this PIO controller */ - __raw_writel(~0, at91_gpio->regbase + PIO_IDR); - - /* Setup irq domain */ - at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio, - &at91_gpio_ops, at91_gpio); - if (!at91_gpio->domain) - panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n", - at91_gpio->pioc_idx); - - /* Setup chained handler */ - if (at91_gpio->pioc_idx) - prev = &gpio_chip[at91_gpio->pioc_idx - 1]; - - /* The toplevel handler handles one bank of GPIOs, except - * on some SoC it can handles up to three... - * We only set up the handler for the first of the list. - */ - if (prev && prev->next == at91_gpio) - return 0; - - at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent), - at91_gpio->pioc_hwirq); - irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio); - irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler); - - return 0; -} -#else -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - return -EINVAL; -} -#endif - /* * irqdomain initialization: pile up irqdomains on top of AIC range */ @@ -862,6 +790,16 @@ void __init at91_gpio_irq_setup(void) } /* gpiolib support */ +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + __raw_writel(mask, pio + PIO_PER); + return 0; +} + static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset) { @@ -975,81 +913,11 @@ err: return -EINVAL; } -#ifdef CONFIG_OF_GPIO -static void __init of_at91_gpio_init_one(struct device_node *np) -{ - int alias_idx; - struct at91_gpio_chip *at91_gpio; - - if (!np) - return; - - alias_idx = of_alias_get_id(np, "gpio"); - if (alias_idx >= MAX_GPIO_BANKS) { - pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n", - alias_idx, MAX_GPIO_BANKS); - return; - } - - at91_gpio = &gpio_chip[alias_idx]; - at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio; - - at91_gpio->regbase = of_iomap(np, 0); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", - alias_idx); - return; - } - - /* Get the interrupts property */ - if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) { - pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n", - alias_idx); - goto ioremap_err; - } - - /* Get capabilities from compatibility property */ - if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio")) - at91_gpio_caps |= AT91_GPIO_CAP_PIO3; - - /* Setup clock */ - if (at91_gpio_setup_clk(alias_idx)) - goto ioremap_err; - - at91_gpio->chip.of_node = np; - gpio_banks = max(gpio_banks, alias_idx + 1); - at91_gpio->pioc_idx = alias_idx; - return; - -ioremap_err: - iounmap(at91_gpio->regbase); -} - -static int __init of_at91_gpio_init(void) -{ - struct device_node *np = NULL; - - /* - * This isn't ideal, but it gets things hooked up until this - * driver is converted into a platform_device - */ - for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio") - of_at91_gpio_init_one(np); - - return gpio_banks > 0 ? 0 : -EINVAL; -} -#else -static int __init of_at91_gpio_init(void) -{ - return -EINVAL; -} -#endif - static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) { struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - at91_gpio->chip.base = idx * at91_gpio->chip.ngpio; + at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK; at91_gpio->pioc_hwirq = pioc_hwirq; at91_gpio->pioc_idx = idx; @@ -1079,11 +947,11 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) BUG_ON(nr_banks > MAX_GPIO_BANKS); - if (of_at91_gpio_init() < 0) { - /* No GPIO controller found in device tree */ - for (i = 0; i < nr_banks; i++) - at91_gpio_init_one(i, data[i].regbase, data[i].id); - } + if (of_have_populated_dt()) + return; + + for (i = 0; i < nr_banks; i++) + at91_gpio_init_one(i, data[i].regbase, data[i].id); for (i = 0; i < gpio_banks; i++) { at91_gpio = &gpio_chip[i]; diff --git a/arch/arm/mach-at91/include/mach/gsia18s.h b/arch/arm/mach-at91/gsia18s.h index 307c194926f9..307c194926f9 100644 --- a/arch/arm/mach-at91/include/mach/gsia18s.h +++ b/arch/arm/mach-at91/gsia18s.h diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h deleted file mode 100644 index d1f80ad7f4d4..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_pit.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_pit.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Periodic Interval Timer (PIT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIT_H -#define AT91_PIT_H - -#define AT91_PIT_MR 0x00 /* Mode Register */ -#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ - -#define AT91_PIT_SR 0x04 /* Status Register */ -#define AT91_PIT_PITS (1 << 0) /* Timer Status */ - -#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ -#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h deleted file mode 100644 index da1945e5f714..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_rtc.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_rtc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Real Time Clock (RTC) - System peripheral registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTC_H -#define AT91_RTC_H - -#define AT91_RTC_CR 0x00 /* Control Register */ -#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ -#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ -#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ -#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) -#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) - -#define AT91_RTC_MR 0x04 /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ - -#define AT91_RTC_TIMR 0x08 /* Time Register */ -#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ -#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ - -#define AT91_RTC_CALR 0x0c /* Calendar Register */ -#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ -#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ -#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ -#define AT91_RTC_DAY (7 << 21) /* Current Day */ -#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ - -#define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ -#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ -#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ -#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ - -#define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ -#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ -#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ - -#define AT91_RTC_SR 0x18 /* Status Register */ -#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ -#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ -#define AT91_RTC_SECEV (1 << 2) /* Second Event */ -#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ -#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ - -#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ -#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ -#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ -#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ - -#define AT91_RTC_VER 0x2c /* Valid Entry Register */ -#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ -#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ -#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ -#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h index cd580a12e904..3069e4135573 100644 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ b/arch/arm/mach-at91/include/mach/atmel-mci.h @@ -14,11 +14,4 @@ struct mci_dma_data { #define slave_data_ptr(s) (&(s)->sdata) #define find_slave_dev(s) ((s)->sdata.dma_dev) -#define setup_dma_addr(s, t, r) do { \ - if (s) { \ - (s)->sdata.tx_reg = (t); \ - (s)->sdata.rx_reg = (r); \ - } \ -} while (0) - #endif /* __MACH_ATMEL_MCI_H */ diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 711a7892d331..a832e0707611 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -90,9 +90,6 @@ #define AT91_SRAM_MAX SZ_1M #define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) -/* Serial ports */ -#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ - /* External Memory Map */ #define AT91_CHIPSELECT_0 0x10000000 #define AT91_CHIPSELECT_1 0x20000000 diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index febc2ee901a5..8e210262aeee 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -42,7 +42,7 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 1b1e62b5f41b..3e22978b5547 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <mach/board.h> +#include "board.h" /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5315f05896e9..adb6db888a1f 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -25,10 +25,10 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "generic.h" #include "pm.h" @@ -36,8 +36,8 @@ * Show the reason for the previous system reset. */ -#include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> +#include "at91_rstc.h" +#include "at91_shdwc.h" static void __init show_reset_status(void) { diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 0b32c81730a5..9ee866ce0478 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -10,6 +10,7 @@ #include <linux/mm.h> #include <linux/pm.h> #include <linux/of_address.h> +#include <linux/pinctrl/machine.h> #include <asm/system_misc.h> #include <asm/mach/map.h> @@ -18,8 +19,8 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91_pmc.h> -#include <mach/at91_shdwc.h> +#include "at91_shdwc.h" #include "soc.h" #include "generic.h" @@ -338,6 +339,7 @@ static void at91_dt_rstc(void) } static struct of_device_id ramc_ids[] = { + { .compatible = "atmel,at91rm9200-sdramc" }, { .compatible = "atmel,at91sam9260-sdramc" }, { .compatible = "atmel,at91sam9g45-ddramc" }, { /*sentinel*/ } @@ -436,6 +438,19 @@ end: of_node_put(np); } +void __init at91rm9200_dt_initialize(void) +{ + at91_dt_ramc(); + + /* Init clock subsystem */ + at91_dt_clock_init(); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} + void __init at91_dt_initialize(void) { at91_dt_rstc(); @@ -448,7 +463,8 @@ void __init at91_dt_initialize(void) /* Register the processor-specific clocks */ at91_boot_soc.register_clocks(); - at91_boot_soc.init(); + if (at91_boot_soc.init) + at91_boot_soc.init(); } #endif @@ -463,4 +479,6 @@ void __init at91_initialize(unsigned long main_clock) at91_boot_soc.register_clocks(); at91_boot_soc.init(); + + pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index a9cfeb153719..9c6d3d4f9a23 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -5,6 +5,7 @@ */ struct at91_init_soc { + int builtin; unsigned int *default_irq_priority; void (*map_io)(void); void (*ioremap_registers)(void); @@ -22,9 +23,18 @@ extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; +#define AT91_SOC_START(_name) \ +struct at91_init_soc __initdata at91##_name##_soc \ + __used \ + = { \ + .builtin = 1, \ + +#define AT91_SOC_END \ +}; + static inline int at91_soc_is_enabled(void) { - return at91_boot_soc.init != NULL; + return at91_boot_soc.builtin; } #if !defined(CONFIG_SOC_AT91RM9200) diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/stamp9g20.h index f62c0abca4b4..f62c0abca4b4 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/stamp9g20.h diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig new file mode 100644 index 000000000000..48705c10a0fe --- /dev/null +++ b/arch/arm/mach-bcm/Kconfig @@ -0,0 +1,19 @@ +config ARCH_BCM + bool "Broadcom SoC" if ARCH_MULTI_V7 + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_GIC + select CPU_V7 + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select GENERIC_TIME + select GPIO_BCM + select SPARSE_IRQ + select TICK_ONESHOT + help + This enables support for system based on Broadcom SoCs. + It currently supports the 'BCM281XX' family, which includes + BCM11130, BCM11140, BCM11351, BCM28145 and + BCM28155 variants. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile new file mode 100644 index 000000000000..bbf412261e5e --- /dev/null +++ b/arch/arm/mach-bcm/Makefile @@ -0,0 +1,13 @@ +# +# Copyright (C) 2012 Broadcom Corporation +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation version 2. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +obj-$(CONFIG_ARCH_BCM) := board_bcm.o diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c new file mode 100644 index 000000000000..3a62f1b1cabc --- /dev/null +++ b/arch/arm/mach-bcm/board_bcm.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2012 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> + +#include <asm/mach/time.h> + +static const struct of_device_id irq_match[] = { + {.compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {} +}; + +static void timer_init(void) +{ +} + +static struct sys_timer timer = { + .init = timer_init, +}; + +static void __init init_irq(void) +{ + of_irq_init(irq_match); +} + +static void __init board_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, + &platform_bus); +} + +static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; + +DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") + .init_irq = init_irq, + .timer = &timer, + .init_machine = board_init, + .dt_compat = bcm11351_dt_compat, + .handle_irq = gic_handle_irq, +MACHINE_END diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot index 2d30e17f5b69..b3271754e9fd 100644 --- a/arch/arm/mach-bcm2835/Makefile.boot +++ b/arch/arm/mach-bcm2835/Makefile.boot @@ -1,3 +1 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 +zreladdr-y := 0x00008000 diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index f6fea4933571..f0d739f4b7a3 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -12,8 +12,10 @@ * GNU General Public License for more details. */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/irqchip/bcm2835.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/bcm2835_timer.h> #include <linux/clk/bcm2835.h> @@ -23,6 +25,48 @@ #include <mach/bcm2835_soc.h> +#define PM_RSTC 0x1c +#define PM_WDOG 0x24 + +#define PM_PASSWORD 0x5a000000 +#define PM_RSTC_WRCFG_MASK 0x00000030 +#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 + +static void __iomem *wdt_regs; + +/* + * The machine restart method can be called from an atomic context so we won't + * be able to ioremap the regs then. + */ +static void bcm2835_setup_restart(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "brcm,bcm2835-pm-wdt"); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_regs = of_iomap(np, 0); + WARN(!wdt_regs, "failed to remap watchdog regs"); +} + +static void bcm2835_restart(char mode, const char *cmd) +{ + u32 val; + + if (!wdt_regs) + return; + + /* use a timeout of 10 ticks (~150us) */ + writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG); + val = readl_relaxed(wdt_regs + PM_RSTC); + val &= ~PM_RSTC_WRCFG_MASK; + val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; + writel_relaxed(val, wdt_regs + PM_RSTC); + + /* No sleeping, possibly atomic. */ + mdelay(1); +} + static struct map_desc io_map __initdata = { .virtual = BCM2835_PERIPH_VIRT, .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS), @@ -30,15 +74,16 @@ static struct map_desc io_map __initdata = { .type = MT_DEVICE }; -void __init bcm2835_map_io(void) +static void __init bcm2835_map_io(void) { iotable_init(&io_map, 1); } -void __init bcm2835_init(void) +static void __init bcm2835_init(void) { int ret; + bcm2835_setup_restart(); bcm2835_init_clocks(); ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, @@ -60,5 +105,6 @@ DT_MACHINE_START(BCM2835, "BCM2835") .handle_irq = bcm2835_handle_irq, .init_machine = bcm2835_init, .timer = &bcm2835_timer, + .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h new file mode 100644 index 000000000000..40a8c178f10d --- /dev/null +++ b/arch/arm/mach-bcm2835/include/mach/gpio.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 263242da2cb8..2d00165e85ec 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -10,7 +10,6 @@ config ARCH_AUTCPU12 config ARCH_CDB89712 bool "CDB89712" - select ISA help This is an evaluation board from Cirrus for the CS89712 processor. The board includes 2 serial ports, Ethernet, IRDA, and expansion @@ -25,7 +24,6 @@ config ARCH_EDB7211 bool "EDB7211" select ARCH_SELECT_MEMORY_MODEL select ARCH_SPARSEMEM_ENABLE - select ISA help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 6da6940b3656..992995af666a 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -9,9 +9,9 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o -obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o -obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o -obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o -obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o -obj-$(CONFIG_ARCH_P720T) += p720t.o +obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o +obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o +obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o +obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o +obj-$(CONFIG_ARCH_FORTUNET) += board-fortunet.o +obj-$(CONFIG_ARCH_P720T) += board-p720t.o diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index 9398e859b5af..eba77d35a615 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,5 +1,4 @@ # The standard locations for stuff on CLPS711x type processors - zreladdr-y += 0xc0028000 params_phys-y := 0xc0000100 # Should probably have some agreement on these... initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c deleted file mode 100644 index 32871918bb6e..000000000000 --- a/arch/arm/mach-clps711x/autcpu12.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/autcpu12.c - * - * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <mach/hardware.h> -#include <asm/sizes.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> -#include <mach/autcpu12.h> - -#include "common.h" - -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * -*/ - -static struct map_desc autcpu12_io_desc[] __initdata = { - /* memory-mapped extra io and CS8900A Ethernet chip */ - /* ethernet chip */ - { - .virtual = AUTCPU12_VIRT_CS8900A, - .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE - } -}; - -void __init autcpu12_map_io(void) -{ - clps711x_map_io(); - iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc)); -} - -static struct resource autcpu12_nvram_resource[] __initdata = { - DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), -}; - -static struct platform_device autcpu12_nvram_pdev __initdata = { - .name = "autcpu12_nvram", - .id = -1, - .resource = autcpu12_nvram_resource, - .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), -}; - -static void __init autcpu12_init(void) -{ - platform_device_register(&autcpu12_nvram_pdev); -} - -MACHINE_START(AUTCPU12, "autronix autcpu12") - /* Maintainer: Thomas Gleixner */ - .atag_offset = 0x20000, - .init_machine = autcpu12_init, - .map_io = autcpu12_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END - diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c new file mode 100644 index 000000000000..3fbf43f72589 --- /dev/null +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -0,0 +1,179 @@ +/* + * linux/arch/arm/mach-clps711x/autcpu12.c + * + * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand-gpio.h> +#include <linux/platform_device.h> +#include <linux/basic_mmio_gpio.h> + +#include <mach/hardware.h> +#include <asm/sizes.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/pgtable.h> +#include <asm/page.h> + +#include <asm/mach/map.h> +#include <mach/autcpu12.h> + +#include "common.h" + +#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define AUTCPU12_CS8900_IRQ (IRQ_EINT3) + +#define AUTCPU12_SMC_BASE (CS1_PHYS_BASE + 0x06000000) +#define AUTCPU12_SMC_SEL_BASE (AUTCPU12_SMC_BASE + 0x10) + +#define AUTCPU12_MMGPIO_BASE (CLPS711X_NR_GPIO) +#define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ +#define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) +#define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) +#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 3) + +static struct resource autcpu12_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), +}; + +static struct resource autcpu12_nvram_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), +}; + +static struct platform_device autcpu12_nvram_pdev __initdata = { + .name = "autcpu12_nvram", + .id = -1, + .resource = autcpu12_nvram_resource, + .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), +}; + +static struct resource autcpu12_nand_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16), +}; + +static struct mtd_partition autcpu12_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_8M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata, + size_t sz) +{ + switch (sz) { + case SZ_16M: + case SZ_32M: + break; + case SZ_64M: + case SZ_128M: + pdata->parts[0].size = SZ_16M; + break; + default: + pr_warn("Unsupported SmartMedia device size %u\n", sz); + break; + } +} + +static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = { + .gpio_rdy = AUTCPU12_SMC_RDY, + .gpio_nce = AUTCPU12_SMC_NCE, + .gpio_ale = AUTCPU12_SMC_ALE, + .gpio_cle = AUTCPU12_SMC_CLE, + .gpio_nwp = -1, + .chip_delay = 20, + .parts = autcpu12_nand_parts, + .num_parts = ARRAY_SIZE(autcpu12_nand_parts), + .adjust_parts = autcpu12_adjust_parts, +}; + +static struct platform_device autcpu12_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = autcpu12_nand_resource, + .num_resources = ARRAY_SIZE(autcpu12_nand_resource), + .dev = { + .platform_data = &autcpu12_nand_pdata, + }, +}; + +static struct resource autcpu12_mmgpio_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"), +}; + +static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = { + .base = AUTCPU12_MMGPIO_BASE, + .ngpio = 8, +}; + +static struct platform_device autcpu12_mmgpio_pdev __initdata = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = autcpu12_mmgpio_resource, + .num_resources = ARRAY_SIZE(autcpu12_mmgpio_resource), + .dev = { + .platform_data = &autcpu12_mmgpio_pdata, + }, +}; + +static void __init autcpu12_init(void) +{ + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, + ARRAY_SIZE(autcpu12_cs8900_resource)); + platform_device_register(&autcpu12_mmgpio_pdev); + platform_device_register(&autcpu12_nvram_pdev); +} + +static void __init autcpu12_init_late(void) +{ + if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) { + /* We are need both drivers to handle NAND */ + platform_device_register(&autcpu12_nand_pdev); + } +} + +MACHINE_START(AUTCPU12, "autronix autcpu12") + /* Maintainer: Thomas Gleixner */ + .atag_offset = 0x20000, + .nr_irqs = CLPS711X_NR_IRQS, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .init_machine = autcpu12_init, + .init_late = autcpu12_init_late, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END + diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c new file mode 100644 index 000000000000..60900ddf97c9 --- /dev/null +++ b/arch/arm/mach-clps711x/board-cdb89712.c @@ -0,0 +1,147 @@ +/* + * linux/arch/arm/mach-clps711x/cdb89712.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/mtd/partitions.h> + +#include <mach/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +#define CDB89712_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define CDB89712_CS8900_IRQ (IRQ_EINT3) + +static struct resource cdb89712_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(CDB89712_CS8900_IRQ), +}; + +static struct mtd_partition cdb89712_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_flash_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_flash_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_flash_partitions), +}; + +static struct resource cdb89712_flash_resources[] __initdata = { + DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M), +}; + +static struct platform_device cdb89712_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = cdb89712_flash_resources, + .num_resources = ARRAY_SIZE(cdb89712_flash_resources), + .dev = { + .platform_data = &cdb89712_flash_pdata, + }, +}; + +static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = { + { + .name = "BootROM", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_bootrom_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_bootrom_partitions), +}; + +static struct resource cdb89712_bootrom_resources[] __initdata = { + DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM | + IORESOURCE_CACHEABLE | IORESOURCE_READONLY), +}; + +static struct platform_device cdb89712_bootrom_pdev __initdata = { + .name = "physmap-flash", + .id = 1, + .resource = cdb89712_bootrom_resources, + .num_resources = ARRAY_SIZE(cdb89712_bootrom_resources), + .dev = { + .platform_data = &cdb89712_bootrom_pdata, + }, +}; + +static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = { + .bankwidth = 4, +}; + +static struct resource cdb89712_sram_resources[] __initdata = { + DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE), +}; + +static struct platform_device cdb89712_sram_pdev __initdata = { + .name = "mtd-ram", + .id = 0, + .resource = cdb89712_sram_resources, + .num_resources = ARRAY_SIZE(cdb89712_sram_resources), + .dev = { + .platform_data = &cdb89712_sram_pdata, + }, +}; + +static void __init cdb89712_init(void) +{ + platform_device_register(&cdb89712_flash_pdev); + platform_device_register(&cdb89712_bootrom_pdev); + platform_device_register(&cdb89712_sram_pdev); + platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource, + ARRAY_SIZE(cdb89712_cs8900_resource)); +} + +MACHINE_START(CDB89712, "Cirrus-CDB89712") + /* Maintainer: Ray Lehtiniemi */ + .atag_offset = 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .init_machine = cdb89712_init, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index dbc7842639dc..0b32a487183b 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -33,14 +33,14 @@ fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) mi->bank[0].size = 0x01000000; } - MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ .atag_offset = 0x0100, + .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_clep7312, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END - diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c new file mode 100644 index 000000000000..71aa5cf2c0d3 --- /dev/null +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/memblock.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/backlight.h> +#include <linux/platform_device.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> + +#include <asm/setup.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <video/platform_lcd.h> + +#include <mach/hardware.h> + +#include "common.h" + +#define VIDEORAM_SIZE SZ_128K + +#define EDB7211_LCD_DC_DC_EN CLPS711X_GPIO(3, 1) +#define EDB7211_LCDEN CLPS711X_GPIO(3, 2) +#define EDB7211_LCDBL CLPS711X_GPIO(3, 3) + +#define EDB7211_FLASH0_BASE (CS0_PHYS_BASE) +#define EDB7211_FLASH1_BASE (CS1_PHYS_BASE) +#define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define EDB7211_CS8900_IRQ (IRQ_EINT3) + +static struct resource edb7211_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(EDB7211_CS8900_IRQ), +}; + +static struct mtd_partition edb7211_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data edb7211_flash_pdata __initdata = { + .width = 4, + .parts = edb7211_flash_partitions, + .nr_parts = ARRAY_SIZE(edb7211_flash_partitions), +}; + +static struct resource edb7211_flash_resources[] __initdata = { + DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M), + DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M), +}; + +static struct platform_device edb7211_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = edb7211_flash_resources, + .num_resources = ARRAY_SIZE(edb7211_flash_resources), + .dev = { + .platform_data = &edb7211_flash_pdata, + }, +}; + +static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + if (power) { + gpio_set_value(EDB7211_LCDEN, 1); + udelay(100); + gpio_set_value(EDB7211_LCD_DC_DC_EN, 1); + } else { + gpio_set_value(EDB7211_LCD_DC_DC_EN, 0); + udelay(100); + gpio_set_value(EDB7211_LCDEN, 0); + } +} + +static struct plat_lcd_data edb7211_lcd_power_pdata = { + .set_power = edb7211_lcd_power_set, +}; + +static void edb7211_lcd_backlight_set_intensity(int intensity) +{ + gpio_set_value(EDB7211_LCDBL, intensity); +} + +static struct generic_bl_info edb7211_lcd_backlight_pdata = { + .name = "lcd-backlight.0", + .default_intensity = 0x01, + .max_intensity = 0x01, + .set_bl_intensity = edb7211_lcd_backlight_set_intensity, +}; + +static struct gpio edb7211_gpios[] __initconst = { + { EDB7211_LCD_DC_DC_EN, GPIOF_OUT_INIT_LOW, "LCD DC-DC" }, + { EDB7211_LCDEN, GPIOF_OUT_INIT_LOW, "LCD POWER" }, + { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" }, +}; + +static struct map_desc edb7211_io_desc[] __initdata = { + { /* Memory-mapped extra keyboard row */ + .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD), + .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), + .length = SZ_1M, + .type = MT_DEVICE, + }, +}; + +void __init edb7211_map_io(void) +{ + clps711x_map_io(); + iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); +} + +/* Reserve screen memory region at the start of main system memory. */ +static void __init edb7211_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE); +} + +static void __init +fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) +{ + /* + * Bank start addresses are not present in the information + * passed in from the boot loader. We could potentially + * detect them, but instead we hard-code them. + * + * Banks sizes _are_ present in the param block, but we're + * not using that information yet. + */ + mi->bank[0].start = 0xc0000000; + mi->bank[0].size = SZ_8M; + mi->bank[1].start = 0xc1000000; + mi->bank[1].size = SZ_8M; + mi->nr_banks = 2; +} + +static void __init edb7211_init(void) +{ + gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios)); + + platform_device_register(&edb7211_flash_pdev); + platform_device_register_data(&platform_bus, "platform-lcd", 0, + &edb7211_lcd_power_pdata, + sizeof(edb7211_lcd_power_pdata)); + platform_device_register_data(&platform_bus, "generic-bl", 0, + &edb7211_lcd_backlight_pdata, + sizeof(edb7211_lcd_backlight_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, + ARRAY_SIZE(edb7211_cs8900_resource)); +} + +MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") + /* Maintainer: Jon McClintock */ + .atag_offset = VIDEORAM_SIZE + 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .fixup = fixup_edb7211, + .reserve = edb7211_reserve, + .map_io = edb7211_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .init_machine = edb7211_init, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c index 3a3f0b702cb4..7d0125580366 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/board-fortunet.c @@ -74,9 +74,11 @@ fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) MACHINE_START(FORTUNET, "ARM-FortuNet") /* Maintainer: FortuNet Inc. */ + .nr_irqs = CLPS711X_NR_IRQS, .fixup = fortunet_fixup, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, + .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c new file mode 100644 index 000000000000..1518fc83babd --- /dev/null +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -0,0 +1,232 @@ +/* + * linux/arch/arm/mach-clps711x/p720t.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/leds.h> +#include <linux/sizes.h> +#include <linux/backlight.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand-gpio.h> + +#include <mach/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/syspld.h> + +#include <video/platform_lcd.h> + +#include "common.h" + +#define P720T_USERLED CLPS711X_GPIO(3, 0) +#define P720T_NAND_CLE CLPS711X_GPIO(4, 0) +#define P720T_NAND_ALE CLPS711X_GPIO(4, 1) +#define P720T_NAND_NCE CLPS711X_GPIO(4, 2) + +#define P720T_NAND_BASE (CLPS711X_SDRAM1_BASE) + +static struct resource p720t_nand_resource[] __initdata = { + DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4), +}; + +static struct mtd_partition p720t_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_2M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct gpio_nand_platdata p720t_nand_pdata __initdata = { + .gpio_rdy = -1, + .gpio_nce = P720T_NAND_NCE, + .gpio_ale = P720T_NAND_ALE, + .gpio_cle = P720T_NAND_CLE, + .gpio_nwp = -1, + .chip_delay = 15, + .parts = p720t_nand_parts, + .num_parts = ARRAY_SIZE(p720t_nand_parts), +}; + +static struct platform_device p720t_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = p720t_nand_resource, + .num_resources = ARRAY_SIZE(p720t_nand_resource), + .dev = { + .platform_data = &p720t_nand_pdata, + }, +}; + +static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + if (power) { + PLD_LCDEN = PLD_LCDEN_EN; + PLD_PWR |= PLD_S4_ON | PLD_S2_ON | PLD_S1_ON; + } else { + PLD_PWR &= ~(PLD_S4_ON | PLD_S2_ON | PLD_S1_ON); + PLD_LCDEN = 0; + } +} + +static struct plat_lcd_data p720t_lcd_power_pdata = { + .set_power = p720t_lcd_power_set, +}; + +static void p720t_lcd_backlight_set_intensity(int intensity) +{ + if (intensity) + PLD_PWR |= PLD_S3_ON; + else + PLD_PWR = 0; +} + +static struct generic_bl_info p720t_lcd_backlight_pdata = { + .name = "lcd-backlight.0", + .default_intensity = 0x01, + .max_intensity = 0x01, + .set_bl_intensity = p720t_lcd_backlight_set_intensity, +}; + +/* + * Map the P720T system PLD. It occupies two address spaces: + * 0x10000000 and 0x10400000. We map both regions as one. + */ +static struct map_desc p720t_io_desc[] __initdata = { + { + .virtual = SYSPLD_VIRT_BASE, + .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), + .length = SZ_8M, + .type = MT_DEVICE, + }, +}; + +static void __init +fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) +{ + /* + * Our bootloader doesn't setup any tags (yet). + */ + if (tag->hdr.tag != ATAG_CORE) { + tag->hdr.tag = ATAG_CORE; + tag->hdr.size = tag_size(tag_core); + tag->u.core.flags = 0; + tag->u.core.pagesize = PAGE_SIZE; + tag->u.core.rootdev = 0x0100; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_MEM; + tag->hdr.size = tag_size(tag_mem32); + tag->u.mem.size = 4096; + tag->u.mem.start = PHYS_OFFSET; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_NONE; + tag->hdr.size = 0; + } +} + +static void __init p720t_map_io(void) +{ + clps711x_map_io(); + iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); +} + +static void __init p720t_init_early(void) +{ + /* + * Power down as much as possible in case we don't + * have the drivers loaded. + */ + PLD_LCDEN = 0; + PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); + + PLD_KBD = 0; + PLD_IO = 0; + PLD_IRDA = 0; + PLD_CODEC = 0; + PLD_TCH = 0; + PLD_SPI = 0; + if (!IS_ENABLED(CONFIG_DEBUG_LL)) { + PLD_COM2 = 0; + PLD_COM1 = 0; + } +} + +static struct gpio_led p720t_gpio_leds[] = { + { + .name = "User LED", + .default_trigger = "heartbeat", + .gpio = P720T_USERLED, + }, +}; + +static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { + .leds = p720t_gpio_leds, + .num_leds = ARRAY_SIZE(p720t_gpio_leds), +}; + +static void __init p720t_init(void) +{ + platform_device_register(&p720t_nand_pdev); + platform_device_register_data(&platform_bus, "platform-lcd", 0, + &p720t_lcd_power_pdata, + sizeof(p720t_lcd_power_pdata)); + platform_device_register_data(&platform_bus, "generic-bl", 0, + &p720t_lcd_backlight_pdata, + sizeof(p720t_lcd_backlight_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); +} + +static void __init p720t_init_late(void) +{ + platform_device_register_data(&platform_bus, "leds-gpio", 0, + &p720t_gpio_led_pdata, + sizeof(p720t_gpio_led_pdata)); +} + +MACHINE_START(P720T, "ARM-Prospector720T") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .atag_offset = 0x100, + .nr_irqs = CLPS711X_NR_IRQS, + .fixup = fixup_p720t, + .map_io = p720t_map_io, + .init_early = p720t_init_early, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .init_machine = p720t_init, + .init_late = p720t_init_late, + .handle_irq = clps711x_handle_irq, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c deleted file mode 100644 index c314f49d6ef6..000000000000 --- a/arch/arm/mach-clps711x/cdb89712.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/cdb89712.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" - -/* - * Map the CS89712 Ethernet port. That should be moved to the - * ethernet driver, perhaps. - */ -static struct map_desc cdb89712_io_desc[] __initdata = { - { - .virtual = ETHER_BASE, - .pfn =__phys_to_pfn(ETHER_START), - .length = ETHER_SIZE, - .type = MT_DEVICE - } -}; - -static void __init cdb89712_map_io(void) -{ - clps711x_map_io(); - iotable_init(cdb89712_io_desc, ARRAY_SIZE(cdb89712_io_desc)); -} - -MACHINE_START(CDB89712, "Cirrus-CDB89712") - /* Maintainer: Ray Lehtiniemi */ - .atag_offset = 0x100, - .map_io = cdb89712_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 509243d89a32..e046439573ee 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -21,13 +21,16 @@ */ #include <linux/io.h> #include <linux/init.h> +#include <linux/sizes.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clockchips.h> #include <linux/clk-provider.h> -#include <asm/sizes.h> +#include <asm/exception.h> +#include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/system_misc.h> @@ -36,7 +39,6 @@ static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, *clk_tint, *clk_spi; -static unsigned long latch; /* * This maps the generic CLPS711x registers @@ -45,7 +47,7 @@ static struct map_desc clps711x_io_desc[] __initdata = { { .virtual = (unsigned long)CLPS711X_VIRT_BASE, .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), - .length = SZ_1M, + .length = SZ_64K, .type = MT_DEVICE } }; @@ -64,7 +66,7 @@ static void int1_mask(struct irq_data *d) clps_writel(intmr1, INTMR1); } -static void int1_ack(struct irq_data *d) +static void int1_eoi(struct irq_data *d) { switch (d->irq) { case IRQ_CSINT: clps_writel(0, COEOI); break; @@ -86,7 +88,8 @@ static void int1_unmask(struct irq_data *d) } static struct irq_chip int1_chip = { - .irq_ack = int1_ack, + .name = "Interrupt Vector 1", + .irq_eoi = int1_eoi, .irq_mask = int1_mask, .irq_unmask = int1_unmask, }; @@ -100,7 +103,7 @@ static void int2_mask(struct irq_data *d) clps_writel(intmr2, INTMR2); } -static void int2_ack(struct irq_data *d) +static void int2_eoi(struct irq_data *d) { switch (d->irq) { case IRQ_KBDINT: clps_writel(0, KBDEOI); break; @@ -117,73 +120,160 @@ static void int2_unmask(struct irq_data *d) } static struct irq_chip int2_chip = { - .irq_ack = int2_ack, + .name = "Interrupt Vector 2", + .irq_eoi = int2_eoi, .irq_mask = int2_mask, .irq_unmask = int2_unmask, }; +static void int3_mask(struct irq_data *d) +{ + u32 intmr3; + + intmr3 = clps_readl(INTMR3); + intmr3 &= ~(1 << (d->irq - 32)); + clps_writel(intmr3, INTMR3); +} + +static void int3_unmask(struct irq_data *d) +{ + u32 intmr3; + + intmr3 = clps_readl(INTMR3); + intmr3 |= 1 << (d->irq - 32); + clps_writel(intmr3, INTMR3); +} + +static struct irq_chip int3_chip = { + .name = "Interrupt Vector 3", + .irq_mask = int3_mask, + .irq_unmask = int3_unmask, +}; + +static struct { + int nr; + struct irq_chip *chip; + irq_flow_handler_t handle; +} clps711x_irqdescs[] __initdata = { + { IRQ_CSINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_EINT1, &int1_chip, handle_level_irq, }, + { IRQ_EINT2, &int1_chip, handle_level_irq, }, + { IRQ_EINT3, &int1_chip, handle_level_irq, }, + { IRQ_TC1OI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_TC2OI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_RTCMI, &int1_chip, handle_fasteoi_irq, }, + { IRQ_TINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_UTXINT1, &int1_chip, handle_level_irq, }, + { IRQ_URXINT1, &int1_chip, handle_level_irq, }, + { IRQ_UMSINT, &int1_chip, handle_fasteoi_irq, }, + { IRQ_SSEOTI, &int1_chip, handle_level_irq, }, + { IRQ_KBDINT, &int2_chip, handle_fasteoi_irq, }, + { IRQ_SS2RX, &int2_chip, handle_level_irq, }, + { IRQ_SS2TX, &int2_chip, handle_level_irq, }, + { IRQ_UTXINT2, &int2_chip, handle_level_irq, }, + { IRQ_URXINT2, &int2_chip, handle_level_irq, }, +}; + void __init clps711x_init_irq(void) { unsigned int i; - for (i = 0; i < NR_IRQS; i++) { - if (INT1_IRQS & (1 << i)) { - irq_set_chip_and_handler(i, &int1_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - if (INT2_IRQS & (1 << i)) { - irq_set_chip_and_handler(i, &int2_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } - - /* - * Disable interrupts - */ + /* Disable interrupts */ clps_writel(0, INTMR1); clps_writel(0, INTMR2); + clps_writel(0, INTMR3); - /* - * Clear down any pending interrupts - */ + /* Clear down any pending interrupts */ + clps_writel(0, BLEOI); + clps_writel(0, MCEOI); clps_writel(0, COEOI); clps_writel(0, TC1EOI); clps_writel(0, TC2EOI); clps_writel(0, RTCEOI); clps_writel(0, TEOI); clps_writel(0, UMSEOI); - clps_writel(0, SYNCIO); clps_writel(0, KBDEOI); + clps_writel(0, SRXEOF); + clps_writel(0xffffffff, DAISR); + + for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) { + irq_set_chip_and_handler(clps711x_irqdescs[i].nr, + clps711x_irqdescs[i].chip, + clps711x_irqdescs[i].handle); + set_irq_flags(clps711x_irqdescs[i].nr, + IRQF_VALID | IRQF_PROBE); + } + + if (IS_ENABLED(CONFIG_FIQ)) { + init_FIQ(0); + irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip, + handle_bad_irq); + set_irq_flags(IRQ_DAIINT, + IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); + } } -/* - * gettimeoffset() returns time since last timer tick, in usecs. - * - * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. - * 'tick' is usecs per jiffy. - */ -static unsigned long clps711x_gettimeoffset(void) +inline u32 fls16(u32 x) { - unsigned long hwticks; - hwticks = latch - (clps_readl(TC2D) & 0xffff); - return (hwticks * (tick_nsec / 1000)) / latch; + u32 r = 15; + + if (!(x & 0xff00)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf000)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc000)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x8000)) + r--; + + return r; } -/* - * IRQ handler for the timer - */ -static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id) +asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs) { - timer_tick(); + u32 irqstat; + void __iomem *base = CLPS711X_VIRT_BASE; + + irqstat = readl_relaxed(base + INTSR1) & readl_relaxed(base + INTMR1); + if (irqstat) { + handle_IRQ(fls16(irqstat), regs); + return; + } + + irqstat = readl_relaxed(base + INTSR2) & readl_relaxed(base + INTMR2); + if (likely(irqstat)) + handle_IRQ(fls16(irqstat) + 16, regs); +} + +static void clps711x_clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ +} + +static struct clock_event_device clockevent_clps711x = { + .name = "CLPS711x Clockevents", + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = clps711x_clockevent_set_mode, +}; + +static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) +{ + clockevent_clps711x.event_handler(&clockevent_clps711x); + return IRQ_HANDLED; } static struct irqaction clps711x_timer_irq = { .name = "CLPS711x Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = p720t_timer_interrupt, + .handler = clps711x_timer_interrupt, }; static void add_fixed_clk(struct clk *clk, const char *name, int rate) @@ -244,20 +334,19 @@ static void __init clps711x_timer_init(void) pr_info("CPU frequency set at %i Hz.\n", cpu); - latch = (timh + HZ / 2) / HZ; + clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); tmp = clps_readl(SYSCON1); tmp |= SYSCON1_TC2S | SYSCON1_TC2M; clps_writel(tmp, SYSCON1); - clps_writel(latch - 1, TC2D); + clockevents_config_and_register(&clockevent_clps711x, timh, 1, 0xffff); setup_irq(IRQ_TC2OI, &clps711x_timer_irq); } struct sys_timer clps711x_timer = { .init = clps711x_timer_init, - .offset = clps711x_gettimeoffset, }; void clps711x_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index fc0f0650dcb5..b7c0c75c90c0 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -4,9 +4,14 @@ * Common bits. */ +#define CLPS711X_NR_IRQS (33) +#define CLPS711X_NR_GPIO (4 * 8 + 3) +#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) + struct sys_timer; extern void clps711x_map_io(void); extern void clps711x_init_irq(void); -extern struct sys_timer clps711x_timer; +extern void clps711x_handle_irq(struct pt_regs *regs); extern void clps711x_restart(char mode, const char *cmd); +extern struct sys_timer clps711x_timer; diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c deleted file mode 100644 index 5fad0b4f40ad..000000000000 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/arch-edb7211.c - * - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/memblock.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" - -extern void edb7211_map_io(void); - -/* Reserve screen memory region at the start of main system memory. */ -static void __init edb7211_reserve(void) -{ - memblock_reserve(PHYS_OFFSET, 0x00020000); -} - -static void __init -fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi) -{ - /* - * Bank start addresses are not present in the information - * passed in from the boot loader. We could potentially - * detect them, but instead we hard-code them. - * - * Banks sizes _are_ present in the param block, but we're - * not using that information yet. - */ - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = 8*1024*1024; - mi->bank[1].start = 0xc1000000; - mi->bank[1].size = 8*1024*1024; - mi->nr_banks = 2; -} - -MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") - /* Maintainer: Jon McClintock */ - .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */ - .fixup = fixup_edb7211, - .map_io = edb7211_map_io, - .reserve = edb7211_reserve, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c deleted file mode 100644 index 4372f06c9929..000000000000 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/mm.c - * - * Extra MM routines for the EDB7211 board - * - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/bug.h> - -#include <mach/hardware.h> -#include <asm/page.h> -#include <asm/sizes.h> - -#include <asm/mach/map.h> - -extern void clps711x_map_io(void); - -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * - * Here is a physical memory map (to be fleshed out later): - * - * Physical Address Size Description - * ----------------- ----- --------------------------------- - * c0000000-c001ffff 128KB reserved for video RAM [1] - * c0020000-c0023fff 16KB parameters (see Documentation/arm/Setup) - * c0024000-c0027fff 16KB swapper_pg_dir (task 0 page directory) - * c0028000-... kernel image (TEXTADDR) - * - * [1] Unused pages should be given back to the VM; they are not yet. - * The parameter block should also be released (not sure if this - * happens). - */ -static struct map_desc edb7211_io_desc[] __initdata = { - { /* memory-mapped extra keyboard row */ - .virtual = EP7211_VIRT_EXTKBD, - .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), - .length = SZ_1M, - .type = MT_DEVICE, - }, { /* and CS8900A Ethernet chip */ - .virtual = EP7211_VIRT_CS8900A, - .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE, - }, { /* flash banks */ - .virtual = EP7211_VIRT_FLASH1, - .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), - .length = SZ_8M, - .type = MT_DEVICE, - }, { - .virtual = EP7211_VIRT_FLASH2, - .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), - .length = SZ_8M, - .type = MT_DEVICE, - } -}; - -void __init edb7211_map_io(void) -{ - clps711x_map_io(); - iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); -} - diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h index 1588a365f610..0452f5f3f034 100644 --- a/arch/arm/mach-clps711x/include/mach/autcpu12.h +++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h @@ -21,24 +21,15 @@ #define __ASM_ARCH_AUTCPU12_H /* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - */ -#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* physical */ -#define AUTCPU12_VIRT_CS8900A (0xfe000000) /* virtual */ - -/* * The flash bank is wired to chip select 0 */ #define AUTCPU12_PHYS_FLASH CS0_PHYS_BASE /* physical */ /* offset for device specific information structure */ #define AUTCPU12_LCDINFO_OFFS (0x00010000) -/* -* Videomemory is the internal SRAM (CS 6) -*/ + +/* Videomemory in the internal SRAM (CS 6) */ #define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE -#define AUTCPU12_VIRT_VIDEO (0xfd000000) /* * All special IO's are tied to CS1 @@ -49,8 +40,6 @@ #define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */ -#define AUTCPU12_PHYS_SMC CS1_PHYS_BASE +0x06000000 /* physical */ - #define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */ #define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */ @@ -59,14 +48,6 @@ #define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */ -/* -* defines for smartmedia card access -*/ -#define AUTCPU12_SMC_RDY (1<<2) -#define AUTCPU12_SMC_ALE (1<<3) -#define AUTCPU12_SMC_CLE (1<<4) -#define AUTCPU12_SMC_PORT_OFFSET PBDR -#define AUTCPU12_SMC_SELECT_OFFSET 0x10 /* * defines for lcd contrast */ diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h index c82e21ca49c7..01d1b9559710 100644 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -257,6 +257,9 @@ #define MEMCFG_BUS_WIDTH_16 (0) #define MEMCFG_BUS_WIDTH_8 (3) +#define MEMCFG_SQAEN (1 << 6) +#define MEMCFG_CLKENB (1 << 7) + #define MEMCFG_WAITSTATE_8_3 (0 << 2) #define MEMCFG_WAITSTATE_7_3 (1 << 2) #define MEMCFG_WAITSTATE_6_3 (2 << 2) @@ -274,4 +277,28 @@ #define MEMCFG_WAITSTATE_2_0 (14 << 2) #define MEMCFG_WAITSTATE_1_0 (15 << 2) +/* INTSR1 Interrupts */ +#define IRQ_CSINT (4) +#define IRQ_EINT1 (5) +#define IRQ_EINT2 (6) +#define IRQ_EINT3 (7) +#define IRQ_TC1OI (8) +#define IRQ_TC2OI (9) +#define IRQ_RTCMI (10) +#define IRQ_TINT (11) +#define IRQ_UTXINT1 (12) +#define IRQ_URXINT1 (13) +#define IRQ_UMSINT (14) +#define IRQ_SSEOTI (15) + +/* INTSR2 Interrupts */ +#define IRQ_KBDINT (16 + 0) +#define IRQ_SS2RX (16 + 1) +#define IRQ_SS2TX (16 + 2) +#define IRQ_UTXINT2 (16 + 12) +#define IRQ_URXINT2 (16 + 13) + +/* INTSR3 Interrupts */ +#define IRQ_DAIINT (32 + 0) + #endif /* __MACH_CLPS711X_H */ diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S deleted file mode 100644 index 56e5c2c23504..000000000000 --- a/arch/arm/mach-clps711x/include/mach/entry-macro.S +++ /dev/null @@ -1,51 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for CLPS711X-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/hardware.h> - - .macro get_irqnr_preamble, base, tmp - .endm - -#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1) -#error INTSR stride != INTMR stride -#endif - - .macro get_irqnr_and_base, irqnr, stat, base, mask - mov \base, #CLPS711X_VIRT_BASE - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #4 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - movs \stat, \stat, lsr #4 - bne 1001f - - add \base, \base, #INTSR2 - INTSR1 - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #16 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - -1001: tst \stat, #255 - addeq \irqnr, \irqnr, #8 - moveq \stat, \stat, lsr #8 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - - diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 8497775d6ee5..2f23dd5d73e4 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -24,7 +24,10 @@ #include <mach/clps711x.h> -#define CLPS711X_VIRT_BASE IOMEM(0xff000000) +#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \ + (((x) >> 2) & 0x3c000000))) + +#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE)) #ifndef __ASSEMBLY__ #define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) @@ -61,67 +64,17 @@ #define CS7_PHYS_BASE (0x00000000) #endif -#define SYSPLD_VIRT_BASE 0xfe000000 -#define SYSPLD_BASE SYSPLD_VIRT_BASE - -#if defined (CONFIG_ARCH_CDB89712) - -#define ETHER_START 0x20000000 -#define ETHER_SIZE 0x1000 -#define ETHER_BASE 0xfe000000 - -#endif +#define CLPS711X_SRAM_BASE CS6_PHYS_BASE +#define CLPS711X_SRAM_SIZE (48 * 1024) +#define CLPS711X_SDRAM0_BASE (0xc0000000) +#define CLPS711X_SDRAM1_BASE (0xd0000000) #if defined (CONFIG_ARCH_EDB7211) -/* - * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) - * and repeat across it. This is the mapping for it. - * - * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */ - -#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */ - - -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - * - * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */ - -#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */ - - -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */ +/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ +#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE #endif /* CONFIG_ARCH_EDB7211 */ -/* - * Relevant bits in port D, which controls power to the various parts of - * the LCD on the EDB7211. - */ -#define EDB_PD1_LCD_DC_DC_EN (1<<1) -#define EDB_PD2_LCDEN (1<<2) -#define EDB_PD3_LCDBL (1<<3) - #endif diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h deleted file mode 100644 index 14d215f8ca81..000000000000 --- a/arch/arm/mach-clps711x/include/mach/irqs.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/irqs.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupts from INTSR1 - */ -#define IRQ_CSINT 4 -#define IRQ_EINT1 5 -#define IRQ_EINT2 6 -#define IRQ_EINT3 7 -#define IRQ_TC1OI 8 -#define IRQ_TC2OI 9 -#define IRQ_RTCMI 10 -#define IRQ_TINT 11 -#define IRQ_UTXINT1 12 -#define IRQ_URXINT1 13 -#define IRQ_UMSINT 14 -#define IRQ_SSEOTI 15 - -#define INT1_IRQS (0x0000fff0) - -/* - * Interrupts from INTSR2 - */ -#define IRQ_KBDINT (16+0) /* bit 0 */ -#define IRQ_SS2RX (16+1) /* bit 1 */ -#define IRQ_SS2TX (16+2) /* bit 2 */ -#define IRQ_UTXINT2 (16+12) /* bit 12 */ -#define IRQ_URXINT2 (16+13) /* bit 13 */ - -#define INT2_IRQS (0x30070000) - -#define NR_IRQS 30 diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h index f7f4c1201898..9a433155bf58 100644 --- a/arch/arm/mach-clps711x/include/mach/syspld.h +++ b/arch/arm/mach-clps711x/include/mach/syspld.h @@ -23,14 +23,9 @@ #define __ASM_ARCH_SYSPLD_H #define SYSPLD_PHYS_BASE (0x10000000) +#define SYSPLD_VIRT_BASE IO_ADDRESS(SYSPLD_PHYS_BASE) -#ifndef __ASSEMBLY__ -#include <asm/types.h> - -#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off)) -#else -#define SYSPLD_REG(type,off) (off) -#endif +#define SYSPLD_REG(type, off) (*(volatile type *)(SYSPLD_VIRT_BASE + (off))) #define PLD_INT SYSPLD_REG(u32, 0x000000) #define PLD_INT_PENIRQ (1 << 5) diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c deleted file mode 100644 index b752b586fc2f..000000000000 --- a/arch/arm/mach-clps711x/p720t.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/p720t.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/leds.h> - -#include <mach/hardware.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/sizes.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/syspld.h> - -#include <asm/hardware/clps7111.h> - -#include "common.h" - -/* - * Map the P720T system PLD. It occupies two address spaces: - * SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000 - * We map both here. - */ -static struct map_desc p720t_io_desc[] __initdata = { - { - .virtual = SYSPLD_VIRT_BASE, - .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, { - .virtual = 0xfe400000, - .pfn = __phys_to_pfn(0x10400000), - .length = SZ_1M, - .type = MT_DEVICE - } -}; - -static void __init -fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi) -{ - /* - * Our bootloader doesn't setup any tags (yet). - */ - if (tag->hdr.tag != ATAG_CORE) { - tag->hdr.tag = ATAG_CORE; - tag->hdr.size = tag_size(tag_core); - tag->u.core.flags = 0; - tag->u.core.pagesize = PAGE_SIZE; - tag->u.core.rootdev = 0x0100; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_MEM; - tag->hdr.size = tag_size(tag_mem32); - tag->u.mem.size = 4096; - tag->u.mem.start = PHYS_OFFSET; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_NONE; - tag->hdr.size = 0; - } -} - -static void __init p720t_map_io(void) -{ - clps711x_map_io(); - iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); -} - -static void __init p720t_init_early(void) -{ - /* - * Power down as much as possible in case we don't - * have the drivers loaded. - */ - PLD_LCDEN = 0; - PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); - - PLD_KBD = 0; - PLD_IO = 0; - PLD_IRDA = 0; - PLD_CODEC = 0; - PLD_TCH = 0; - PLD_SPI = 0; - if (!IS_ENABLED(CONFIG_DEBUG_LL)) { - PLD_COM2 = 0; - PLD_COM1 = 0; - } -} - -/* - * LED controled by CPLD - */ -#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) -static void p720t_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - u8 reg = clps_readb(PDDR); - - if (b != LED_OFF) - reg |= 0x1; - else - reg &= ~0x1; - - clps_writeb(reg, PDDR); -} - -static enum led_brightness p720t_led_get(struct led_classdev *cdev) -{ - u8 reg = clps_readb(PDDR); - - return (reg & 0x1) ? LED_FULL : LED_OFF; -} - -static int __init p720t_leds_init(void) -{ - - struct led_classdev *cdev; - int ret; - - if (!machine_is_p720t()) - return -ENODEV; - - cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); - if (!cdev) - return -ENOMEM; - - cdev->name = "p720t:0"; - cdev->brightness_set = p720t_led_set; - cdev->brightness_get = p720t_led_get; - cdev->default_trigger = "heartbeat"; - - ret = led_classdev_register(NULL, cdev); - if (ret < 0) { - kfree(cdev); - return ret; - } - - return 0; -} - -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(p720t_leds_init); -#endif - -MACHINE_START(P720T, "ARM-Prospector720T") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = fixup_p720t, - .init_early = p720t_init_early, - .map_io = p720t_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 29b13f249aa9..9ebfcc46feb1 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -3,7 +3,6 @@ menu "CNS3XXX platform type" config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" - select MIGHT_HAVE_PCI help Include support for the Cavium Networks CNS3420 MPCore Platform Baseboard. diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 2c5fb4c7e509..ae305397003c 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -24,6 +24,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/hardware/gic.h> @@ -32,6 +34,7 @@ #include <asm/mach/time.h> #include <mach/cns3xxx.h> #include <mach/irqs.h> +#include <mach/pm.h> #include "core.h" #include "devices.h" @@ -125,13 +128,52 @@ static struct resource cns3xxx_usb_ehci_resources[] = { static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32); +static int csn3xxx_usb_power_on(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + * + * Set USB AHB INCR length to 16 + */ + if (atomic_inc_return(&usb_pwr_ref) == 1) { + cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); + cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); + cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); + __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), + MISC_CHIP_CONFIG_REG); + } + + return 0; +} + +static void csn3xxx_usb_power_off(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + */ + if (atomic_dec_return(&usb_pwr_ref) == 0) + cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); +} + +static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = { + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + static struct platform_device cns3xxx_usb_ehci_device = { - .name = "cns3xxx-ehci", + .name = "ehci-platform", .num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources), .resource = cns3xxx_usb_ehci_resources, .dev = { .dma_mask = &cns3xxx_usb_ehci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cns3xxx_usb_ehci_pdata, }, }; @@ -149,13 +191,20 @@ static struct resource cns3xxx_usb_ohci_resources[] = { static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32); +static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { + .num_ports = 1, + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + static struct platform_device cns3xxx_usb_ohci_device = { - .name = "cns3xxx-ohci", + .name = "ohci-platform", .num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources), .resource = cns3xxx_usb_ohci_resources, .dev = { .dma_mask = &cns3xxx_usb_ohci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cns3xxx_usb_ohci_pdata, }, }; diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index f8eecb959413..0153950f6068 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -58,6 +58,14 @@ config ARCH_DAVINCI_TNETV107X comment "DaVinci Board Type" +config MACH_DA8XX_DT + bool "Support DA8XX platforms using device tree" + default y + depends on ARCH_DAVINCI_DA8XX + help + Say y here to include support for TI DaVinci DA850 based using + Flattened Device Tree. More information at Documentation/devicetree + config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2227effcb0e9..fb5c1aa98a63 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific +obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot index 04a6c4e67b14..5c5a95a9d7d2 100644 --- a/arch/arm/mach-davinci/Makefile.boot +++ b/arch/arm/mach-davinci/Makefile.boot @@ -11,3 +11,5 @@ else params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 endif + +dtb-$(CONFIG_MACH_DA8XX_DT) += da850-enbw-cmc.dtb da850-evm.dtb diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 32ee3f895967..d4f4dbfc0e59 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -11,39 +11,40 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> -#include <linux/init.h> #include <linux/console.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/init.h> +#include <linux/kernel.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/i2c/pca953x.h> #include <linux/input.h> +#include <linux/input/tps6507x-ts.h> #include <linux/mfd/tps6507x.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> -#include <linux/input/tps6507x-ts.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/delay.h> #include <linux/wl12xx.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/system_info.h> - #include <mach/cp_intc.h> #include <mach/da8xx.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/spi-davinci.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/system_info.h> #include <media/tvp514x.h> #include <media/adv7343.h> @@ -1516,6 +1517,11 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", ret); + ret = da8xx_register_uio_pruss(); + if (ret) + pr_warn("da850_evm_init: pruss initialization failed: %d\n", + ret); + /* Handle board specific muxing for LCD here */ ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); if (ret) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 88ebea89abdf..cdf8d0746e79 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -324,7 +324,7 @@ static __init void dm355_evm_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 2f88103c6459..d41954507fc2 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -246,7 +246,7 @@ static __init void dm355_leopard_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_leopard_devices, ARRAY_SIZE(davinci_leopard_devices)); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1b4a8adcfdc9..5d49c75388ca 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -478,7 +478,7 @@ static void __init evm_init_cpld(void) aemif_clk = clk_get(NULL, "aemif"); if (IS_ERR(aemif_clk)) return; - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE, "cpld") == NULL) @@ -489,7 +489,7 @@ static void __init evm_init_cpld(void) SECTION_SIZE); fail: pr_err("ERROR: can't map CPLD\n"); - clk_disable(aemif_clk); + clk_disable_unprepare(aemif_clk); return; } diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index f22572cee49d..f5e018de7fa5 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -519,13 +519,11 @@ static int dm6444evm_msp430_get_pins(void) char buf[4]; struct i2c_msg msg[2] = { { - .addr = dm6446evm_msp->addr, .flags = 0, .len = 2, .buf = (void __force *)txbuf, }, { - .addr = dm6446evm_msp->addr, .flags = I2C_M_RD, .len = 4, .buf = buf, @@ -536,6 +534,9 @@ static int dm6444evm_msp430_get_pins(void) if (!dm6446evm_msp) return -ENXIO; + msg[0].addr = dm6446evm_msp->addr; + msg[1].addr = dm6446evm_msp->addr; + /* Command 4 == get input state, returns port 2 and port3 data * S Addr W [A] len=2 [A] cmd=4 [A] * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P @@ -776,7 +777,7 @@ static __init void davinci_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND || HAS_NOR) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 1dbf85beed1b..9211e8800c79 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -194,7 +194,7 @@ static int evm_led_setup(struct i2c_client *client, int gpio, while (ngpio--) { leds->gpio = gpio++; leds++; - }; + } evm_led_dev = platform_device_alloc("leds-gpio", 0); platform_device_add_data(evm_led_dev, &evm_led_data, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 144bf31d68dd..3e3e3afebf88 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -188,7 +188,7 @@ static __init void davinci_ntosd2_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND) diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 64b0f65a8639..a794f6d9d444 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -87,8 +87,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) iotable_init(davinci_soc_info.io_desc, davinci_soc_info.io_desc_num); - init_consistent_dma_size(14 << 20); - /* * Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b90c172d5541..68c5fe01857c 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -212,6 +212,12 @@ static struct clk tptc2_clk = { .flags = ALWAYS_ENABLED, }; +static struct clk pruss_clk = { + .name = "pruss", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_PRUSS, +}; + static struct clk uart0_clk = { .name = "uart0", .parent = &pll0_sysclk2, @@ -385,6 +391,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "tptc1", &tptc1_clk), CLK(NULL, "tpcc1", &tpcc1_clk), CLK(NULL, "tptc2", &tptc2_clk), + CLK("pruss_uio", "pruss", &pruss_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), @@ -781,12 +788,6 @@ static struct map_desc da850_io_desc[] = { .length = DA8XX_CP_INTC_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(DA8XX_ARM_RAM_BASE), - .length = SZ_8K, - .type = MT_DEVICE - }, }; static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; @@ -1239,8 +1240,8 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, - .sram_dma = DA8XX_ARM_RAM_BASE, - .sram_len = SZ_8K, + .sram_dma = DA8XX_SHARED_RAM_BASE, + .sram_len = SZ_128K, }; void __init da850_init(void) diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c new file mode 100644 index 000000000000..37c27af18fa0 --- /dev/null +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Modified from mach-omap/omap2/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/irqdomain.h> + +#include <asm/mach/arch.h> + +#include <mach/common.h> +#include <mach/cp_intc.h> +#include <mach/da8xx.h> + +#define DA8XX_NUM_UARTS 3 + +void __init da8xx_uart_clk_enable(void) +{ + int i; + for (i = 0; i < DA8XX_NUM_UARTS; i++) + davinci_serial_setup_clk(i, NULL); +} + +static struct of_device_id da8xx_irq_match[] __initdata = { + { .compatible = "ti,cp-intc", .data = cp_intc_of_init, }, + { } +}; + +static void __init da8xx_init_irq(void) +{ + of_irq_init(da8xx_irq_match); +} + +#ifdef CONFIG_ARCH_DAVINCI_DA850 + +static void __init da850_init_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + da8xx_uart_clk_enable(); +} + +static const char *da850_boards_compat[] __initdata = { + "enbw,cmc", + "ti,da850-evm", + "ti,da850", + NULL, +}; + +DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x") + .map_io = da850_init, + .init_irq = da8xx_init_irq, + .timer = &davinci_timer, + .init_machine = da850_init_machine, + .dt_compat = da850_boards_compat, + .init_late = davinci_init_late, + .restart = da8xx_restart, +MACHINE_END + +#endif diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index bd2f72b414bc..46c9a0c09ae5 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -22,6 +22,7 @@ #include <mach/time.h> #include <mach/da8xx.h> #include <mach/cpuidle.h> +#include <mach/sram.h> #include "clock.h" #include "asp.h" @@ -32,6 +33,7 @@ #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 #define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_PRUSS_MEM_BASE 0x01c30000 #define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 @@ -518,6 +520,75 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) } } +static struct resource da8xx_pruss_resources[] = { + { + .start = DA8XX_PRUSS_MEM_BASE, + .end = DA8XX_PRUSS_MEM_BASE + 0xFFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_EVTOUT0, + .end = IRQ_DA8XX_EVTOUT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT1, + .end = IRQ_DA8XX_EVTOUT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT2, + .end = IRQ_DA8XX_EVTOUT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT3, + .end = IRQ_DA8XX_EVTOUT3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT4, + .end = IRQ_DA8XX_EVTOUT4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT5, + .end = IRQ_DA8XX_EVTOUT5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT6, + .end = IRQ_DA8XX_EVTOUT6, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT7, + .end = IRQ_DA8XX_EVTOUT7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct uio_pruss_pdata da8xx_uio_pruss_pdata = { + .pintc_base = 0x4000, +}; + +static struct platform_device da8xx_uio_pruss_dev = { + .name = "pruss_uio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_pruss_resources), + .resource = da8xx_pruss_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &da8xx_uio_pruss_pdata, + } +}; + +int __init da8xx_register_uio_pruss(void) +{ + da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool(); + return platform_device_register(&da8xx_uio_pruss_dev); +} + static const struct display_panel disp_panel = { QVGA, 16, @@ -900,7 +971,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) if (IS_ERR(da850_sata_clk)) return PTR_ERR(da850_sata_clk); - ret = clk_enable(da850_sata_clk); + ret = clk_prepare_enable(da850_sata_clk); if (ret) goto err0; @@ -931,7 +1002,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) return 0; err1: - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); err0: clk_put(da850_sata_clk); return ret; @@ -939,7 +1010,7 @@ err0: static void da850_sata_exit(struct device *dev) { - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); clk_put(da850_sata_clk); } diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 29b17f7d3a5f..773ab07a71a0 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -374,7 +374,7 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) * complete sample conversion in time. */ tsc_clk = clk_get(NULL, "sys_tsc_clk"); - if (tsc_clk) { + if (!IS_ERR(tsc_clk)) { error = clk_set_rate(tsc_clk, 5000000); WARN_ON(error < 0); clk_put(tsc_clk); diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a255434908db..b49c3b77d55e 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -758,12 +758,6 @@ static struct map_desc dm355_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index b680c832e0ba..6c3980540be0 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -985,12 +985,6 @@ static struct map_desc dm365_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; static struct resource dm365_ks_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 14e9947bad6e..11c79a3362ef 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -785,12 +785,6 @@ static struct map_desc dm644x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00008000), - .length = SZ_16K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 97c0f8e555bd..ac7b431c4c8e 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -756,12 +756,6 @@ static struct map_desc dm646x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index bdc4aa8e672a..046c7238a3d6 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -104,8 +104,6 @@ int davinci_pm_init(void); static inline int davinci_pm_init(void) { return 0; } #endif -/* standard place to map on-chip SRAMs; they *may* support DMA */ -#define SRAM_VIRT 0xfffe0000 #define SRAM_SIZE SZ_128K #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aaccdc4528fc..700d311c6854 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -26,6 +26,7 @@ #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <media/davinci/vpif_types.h> @@ -72,6 +73,7 @@ extern unsigned int da850_max_speed; #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 +#define DA8XX_SHARED_RAM_BASE 0x80000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); @@ -86,6 +88,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); +int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 46b3cd11c3c2..62ad300440f5 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -38,11 +38,12 @@ #ifndef __ASSEMBLY__ struct davinci_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ + /* Bit field of UARTs present; bit 0 --> UART0 */ unsigned int enabled_uarts; }; extern int davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate); #endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h index 111f7cc71e07..4e5db56218b8 100644 --- a/arch/arm/mach-davinci/include/mach/sram.h +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -24,4 +24,7 @@ extern void *sram_alloc(size_t len, dma_addr_t *dma); extern void sram_free(void *addr, size_t len); +/* Get the struct gen_pool * for use in platform data */ +extern struct gen_pool *sram_get_gen_pool(void); + #endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 18cfd4977155..3a0ff905a69b 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -32,6 +32,9 @@ u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) { + if (!uart) + return; + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); uart[UART_TX] = c; @@ -39,6 +42,9 @@ static void putc(char c) static inline void flush(void) { + if (!uart) + return; + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 1875740fe27c..f2625814c3c9 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -70,11 +70,33 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -int __init davinci_serial_init(struct davinci_uart_config *info) +/* Enable UART clock and obtain its rate */ +int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate) { - int i; char name[16]; - struct clk *uart_clk; + struct clk *clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + + sprintf(name, "uart%d", instance); + clk = clk_get(dev, name); + if (IS_ERR(clk)) { + pr_err("%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, instance); + return PTR_ERR(clk); + } + + clk_prepare_enable(clk); + + if (rate) + *rate = clk_get_rate(clk); + + return 0; +} + +int __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i, ret; struct davinci_soc_info *soc_info = &davinci_soc_info; struct device *dev = &soc_info->serial_dev->dev; struct plat_serial8250_port *p = dev->platform_data; @@ -87,16 +109,9 @@ int __init davinci_serial_init(struct davinci_uart_config *info) if (!(info->enabled_uarts & (1 << i))) continue; - sprintf(name, "uart%d", i); - uart_clk = clk_get(dev, name); - if (IS_ERR(uart_clk)) { - printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", - __func__, __LINE__, i); + ret = davinci_serial_setup_clk(i, &p->uartclk); + if (ret) continue; - } - - clk_enable(uart_clk); - p->uartclk = clk_get_rate(uart_clk); if (!p->membase && p->mapbase) { p->membase = ioremap(p->mapbase, SZ_4K); diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index db0f7787faf1..c5f7ee5cc80a 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/genalloc.h> #include <mach/common.h> @@ -17,6 +18,11 @@ static struct gen_pool *sram_pool; +struct gen_pool *sram_get_gen_pool(void) +{ + return sram_pool; +} + void *sram_alloc(size_t len, dma_addr_t *dma) { unsigned long vaddr; @@ -32,7 +38,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma) return NULL; if (dma) - *dma = dma_base + (vaddr - SRAM_VIRT); + *dma = gen_pool_virt_to_phys(sram_pool, vaddr); return (void *)vaddr; } @@ -53,8 +59,10 @@ EXPORT_SYMBOL(sram_free); */ static int __init sram_init(void) { + phys_addr_t phys = davinci_soc_info.sram_dma; unsigned len = davinci_soc_info.sram_len; int status = 0; + void *addr; if (len) { len = min_t(unsigned, len, SRAM_SIZE); @@ -62,8 +70,17 @@ static int __init sram_init(void) if (!sram_pool) status = -ENOMEM; } - if (sram_pool) - status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + + if (sram_pool) { + addr = ioremap(phys, len); + if (!addr) + return -ENOMEM; + status = gen_pool_add_virt(sram_pool, (unsigned)addr, + phys, len, -1); + if (status < 0) + iounmap(addr); + } + WARN_ON(status < 0); return status; } diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 75da315b6587..9847938785ca 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -379,7 +379,7 @@ static void __init davinci_timer_init(void) timer_clk = clk_get(NULL, "timer0"); BUG_ON(IS_ERR(timer_clk)); - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); /* init timer hw */ timer_init(); @@ -429,7 +429,7 @@ void davinci_watchdog_reset(struct platform_device *pdev) wd_clk = clk_get(&pdev->dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; - clk_enable(wd_clk); + clk_prepare_enable(wd_clk); /* disable, internal clock source */ __raw_writel(0, base + TCR); diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index f77b95336e2b..34509ffba221 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data usb_data = { -#if defined(CONFIG_USB_MUSB_OTG) /* OTG requires a Mini-AB connector */ .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#elif defined(CONFIG_USB_MUSB_HOST) - .mode = MUSB_HOST, -#endif .clock = "usb", .config = &musb_config, }; diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 7bcd0dfce4b1..b47f75038686 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin) static inline int irq_to_pmu(int irq) { - if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS) + if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS) return irq - IRQ_DOVE_PMU_START; return -EINVAL; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 087711524e8a..bc4344aa1009 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d) int pin = irq_to_pmu(d->irq); u32 u; + /* + * The PMU mask register is not RW0C: it is RW. This means that + * the bits take whatever value is written to them; if you write + * a '1', you will set the interrupt. + * + * Unfortunately this means there is NO race free way to clear + * these interrupts. + * + * So, let's structure the code so that the window is as small as + * possible. + */ u = ~(1 << (pin & 31)); - writel(u, PMU_INTERRUPT_CAUSE); + u &= readl_relaxed(PMU_INTERRUPT_CAUSE); + writel_relaxed(u, PMU_INTERRUPT_CAUSE); } static struct irq_chip pmu_irq_chip = { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index da55107033dd..070c7b6d3d86 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -67,6 +67,15 @@ config SOC_EXYNOS5250 help Enable EXYNOS5250 SoC support +config SOC_EXYNOS5440 + bool "SAMSUNG EXYNOS5440" + default y + depends on ARCH_EXYNOS5 + select ARM_ARCH_TIMER + select AUTO_ZRELADDR + help + Enable EXYNOS5440 SoC support + config EXYNOS4_MCT bool default y @@ -98,11 +107,6 @@ config EXYNOS_DEV_SYSMMU help Common setup code for SYSTEM MMU in EXYNOS platforms -config EXYNOS4_DEV_DWMCI - bool - help - Compile in platform device definitions for DWMCI - config EXYNOS4_DEV_USB_OHCI bool help @@ -417,9 +421,9 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" + default y depends on ARCH_EXYNOS5 select ARM_AMBA - select SOC_EXYNOS5250 select USE_OF help Machine support for Samsung EXYNOS5 machine with device tree enabled. diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 9b58024f7d43..66135eedf491 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -14,9 +14,9 @@ obj- := obj-$(CONFIG_ARCH_EXYNOS) += common.o obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o -obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o +obj-$(CONFIG_SOC_EXYNOS5250) += clock-exynos5.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o @@ -50,7 +50,6 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o obj-y += dev-uart.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index 6a45c9a9abe9..fa8a13405c94 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -613,11 +613,6 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 18), }, { .name = "iis", - .devname = "samsung-i2s.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "iis", .devname = "samsung-i2s.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 20), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index c44ca1ee1b8d..4478757b9301 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -292,7 +292,7 @@ static struct clksrc_sources exynos5_clk_src_mpll = { .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list), }; -struct clksrc_clk exynos5_clk_mout_mpll = { +static struct clksrc_clk exynos5_clk_mout_mpll = { .clk = { .name = "mout_mpll", }, @@ -467,12 +467,12 @@ static struct clksrc_clk exynos5_clk_pclk_acp = { /* Core list of CMU_TOP side */ -struct clk *exynos5_clkset_aclk_top_list[] = { +static struct clk *exynos5_clkset_aclk_top_list[] = { [0] = &exynos5_clk_mout_mpll_user.clk, [1] = &exynos5_clk_mout_bpll_user.clk, }; -struct clksrc_sources exynos5_clkset_aclk = { +static struct clksrc_sources exynos5_clkset_aclk = { .sources = exynos5_clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list), }; @@ -486,12 +486,12 @@ static struct clksrc_clk exynos5_clk_aclk_400 = { .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, }; -struct clk *exynos5_clkset_aclk_333_166_list[] = { +static struct clk *exynos5_clkset_aclk_333_166_list[] = { [0] = &exynos5_clk_mout_cpll.clk, [1] = &exynos5_clk_mout_mpll_user.clk, }; -struct clksrc_sources exynos5_clkset_aclk_333_166 = { +static struct clksrc_sources exynos5_clkset_aclk_333_166 = { .sources = exynos5_clkset_aclk_333_166_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list), }; @@ -966,7 +966,7 @@ static struct clk exynos5_clk_fimd1 = { .ctrlbit = (1 << 0), }; -struct clk *exynos5_clkset_group_list[] = { +static struct clk *exynos5_clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = NULL, [2] = &exynos5_clk_sclk_hdmi24m, @@ -979,7 +979,7 @@ struct clk *exynos5_clkset_group_list[] = { [9] = &exynos5_clk_mout_cpll.clk, }; -struct clksrc_sources exynos5_clkset_group = { +static struct clksrc_sources exynos5_clkset_group = { .sources = exynos5_clkset_group_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list), }; @@ -1195,7 +1195,7 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = { .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, }; -struct clksrc_clk exynos5_clk_sclk_fimd1 = { +static struct clksrc_clk exynos5_clk_sclk_fimd1 = { .clk = { .name = "sclk_fimd", .devname = "exynos5-fb.1", @@ -1476,7 +1476,7 @@ static void exynos5_clock_resume(void) #define exynos5_clock_resume NULL #endif -struct syscore_ops exynos5_clock_syscore_ops = { +static struct syscore_ops exynos5_clock_syscore_ops = { .suspend = exynos5_clock_suspend, .resume = exynos5_clock_resume, }; diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 1947be8e5f5b..e05f6cca2c9b 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -18,6 +18,7 @@ #include <linux/sched.h> #include <linux/serial_core.h> #include <linux/of.h> +#include <linux/of_fdt.h> #include <linux/of_irq.h> #include <linux/export.h> #include <linux/irqdomain.h> @@ -58,12 +59,14 @@ static const char name_exynos4210[] = "EXYNOS4210"; static const char name_exynos4212[] = "EXYNOS4212"; static const char name_exynos4412[] = "EXYNOS4412"; static const char name_exynos5250[] = "EXYNOS5250"; +static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); static void exynos5_map_io(void); +static void exynos5440_map_io(void); static void exynos4_init_clocks(int xtal); static void exynos5_init_clocks(int xtal); -static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no); +static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); static int exynos_init(void); static struct cpu_table cpu_ids[] __initdata = { @@ -72,7 +75,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4210, }, { @@ -80,7 +83,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4212, }, { @@ -88,7 +91,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4412, }, { @@ -96,9 +99,14 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS5_SOC_MASK, .map_io = exynos5_map_io, .init_clocks = exynos5_init_clocks, - .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos5250, + }, { + .idcode = EXYNOS5440_SOC_ID, + .idmask = EXYNOS5_SOC_MASK, + .map_io = exynos5440_map_io, + .init = exynos_init, + .name = name_exynos5440, }, }; @@ -113,6 +121,17 @@ static struct map_desc exynos_iodesc[] __initdata = { }, }; +#ifdef CONFIG_ARCH_EXYNOS5 +static struct map_desc exynos5440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_CHIPID, + .pfn = __phys_to_pfn(EXYNOS5440_PA_CHIPID), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; +#endif + static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -257,24 +276,18 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_64K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_COMBINER_BASE, - .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S3C_VA_UART, .pfn = __phys_to_pfn(EXYNOS5_PA_UART), .length = SZ_512K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GIC_CPU, - .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU), - .length = SZ_8K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GIC_DIST, - .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST), - .length = SZ_4K, + }, +}; + +static struct map_desc exynos5440_iodesc0[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0), + .length = SZ_512K, .type = MT_DEVICE, }, }; @@ -286,11 +299,29 @@ void exynos4_restart(char mode, const char *cmd) void exynos5_restart(char mode, const char *cmd) { - __raw_writel(0x1, EXYNOS_SWRESET); + u32 val; + void __iomem *addr; + + if (of_machine_is_compatible("samsung,exynos5250")) { + val = 0x1; + addr = EXYNOS_SWRESET; + } else if (of_machine_is_compatible("samsung,exynos5440")) { + val = (0x10 << 20) | (0x1 << 16); + addr = EXYNOS5440_SWRESET; + } else { + pr_err("%s: cannot support non-DT\n", __func__); + return; + } + + __raw_writel(val, addr); } void __init exynos_init_late(void) { + if (of_machine_is_compatible("samsung,exynos5440")) + /* to be supported later */ + return; + exynos_pm_late_initcall(); } @@ -302,8 +333,20 @@ void __init exynos_init_late(void) void __init exynos_init_io(struct map_desc *mach_desc, int size) { + struct map_desc *iodesc = exynos_iodesc; + int iodesc_sz = ARRAY_SIZE(exynos_iodesc); +#if defined(CONFIG_OF) && defined(CONFIG_ARCH_EXYNOS5) + unsigned long root = of_get_flat_dt_root(); + /* initialize the io descriptors we need for initialization */ - iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); + if (of_flat_dt_is_compatible(root, "samsung,exynos5440")) { + iodesc = exynos5440_iodesc; + iodesc_sz = ARRAY_SIZE(exynos5440_iodesc); + } +#endif + + iotable_init(iodesc, iodesc_sz); + if (mach_desc) iotable_init(mach_desc, size); @@ -354,23 +397,6 @@ static void __init exynos4_map_io(void) static void __init exynos5_map_io(void) { iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0); - s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1; - s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; - s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; - - s3c_sdhci_setname(0, "exynos4-sdhci"); - s3c_sdhci_setname(1, "exynos4-sdhci"); - s3c_sdhci_setname(2, "exynos4-sdhci"); - s3c_sdhci_setname(3, "exynos4-sdhci"); - - /* The I2C bus controllers are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - s3c_i2c2_setname("s3c2440-i2c"); - - s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) @@ -389,6 +415,11 @@ static void __init exynos4_init_clocks(int xtal) exynos4_setup_clocks(); } +static void __init exynos5440_map_io(void) +{ + iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); +} + static void __init exynos5_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); @@ -589,7 +620,8 @@ static void __init combiner_init(void __iomem *combiner_base, } #ifdef CONFIG_OF -int __init combiner_of_init(struct device_node *np, struct device_node *parent) +static int __init combiner_of_init(struct device_node *np, + struct device_node *parent) { void __iomem *combiner_base; @@ -604,8 +636,9 @@ int __init combiner_of_init(struct device_node *np, struct device_node *parent) return 0; } -static const struct of_device_id exynos4_dt_irq_match[] = { +static const struct of_device_id exynos_dt_irq_match[] = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, { .compatible = "samsung,exynos4210-combiner", .data = combiner_of_init, }, {}, @@ -622,7 +655,7 @@ void __init exynos4_init_irq(void) gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); #ifdef CONFIG_OF else - of_irq_init(exynos4_dt_irq_match); + of_irq_init(exynos_dt_irq_match); #endif if (!of_have_populated_dt()) @@ -639,7 +672,7 @@ void __init exynos4_init_irq(void) void __init exynos5_init_irq(void) { #ifdef CONFIG_OF - of_irq_init(exynos4_dt_irq_match); + of_irq_init(exynos_dt_irq_match); #endif /* * The parameters of s5p_init_irq() are for VIC init. @@ -669,7 +702,7 @@ static int __init exynos4_l2x0_cache_init(void) { int ret; - if (soc_is_exynos5250()) + if (soc_is_exynos5250() || soc_is_exynos5440()) return 0; ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); @@ -727,7 +760,7 @@ static int __init exynos_init(void) /* uart registration process */ -static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) { struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; @@ -735,10 +768,7 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no) for (ucnt = 0; ucnt < no; ucnt++, tcfg++) tcfg->has_fracval = 1; - if (soc_is_exynos5250()) - s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no); - else - s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); + s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); } static void __iomem *exynos_eint_base; @@ -970,14 +1000,7 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) struct irq_chip *chip = irq_get_chip(irq); chained_irq_enter(chip, desc); - chip->irq_mask(&desc->irq_data); - - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - generic_handle_irq(*irq_data); - - chip->irq_unmask(&desc->irq_data); chained_irq_exit(chip, desc); } @@ -1010,6 +1033,8 @@ static int __init exynos_init_irq_eint(void) } } #endif + if (soc_is_exynos5440()) + return 0; if (soc_is_exynos5250()) exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index ae321c7cb15f..a1cb42c39590 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -14,9 +14,9 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/platform_data/asoc-s3c.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c.h> #include <mach/map.h> #include <mach/dma.h> diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c deleted file mode 100644 index 79035018fb74..000000000000 --- a/arch/arm/mach-exynos/dev-dwmci.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/dev-dwmci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Platform device for Synopsys DesignWare Mobile Storage IP - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mmc/dw_mmc.h> - -#include <plat/devs.h> - -#include <mach/map.h> - -static int exynos4_dwmci_get_bus_wd(u32 slot_id) -{ - return 4; -} - -static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) -{ - return 0; -} - -static struct resource exynos4_dwmci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K), - [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI), -}; - -static struct dw_mci_board exynos4_dwci_pdata = { - .num_slots = 1, - .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, - .bus_hz = 80 * 1000 * 1000, - .detect_delay_ms = 200, - .init = exynos4_dwmci_init, - .get_bus_wd = exynos4_dwmci_get_bus_wd, -}; - -static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_dwmci = { - .name = "dw_mmc", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_dwmci_resource), - .resource = exynos4_dwmci_resource, - .dev = { - .dma_mask = &exynos4_dwmci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_dwci_pdata, - }, -}; - -void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd) -{ - struct dw_mci_board *npd; - - npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board), - &exynos4_device_dwmci); - - if (!npd->init) - npd->init = exynos4_dwmci_init; - if (!npd->get_bus_wd) - npd->get_bus_wd = exynos4_dwmci_get_bus_wd; -} diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c index 14ed7951a2c6..4244d02dafbd 100644 --- a/arch/arm/mach-exynos/dev-ohci.c +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -12,10 +12,10 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/platform_data/usb-exynos.h> #include <mach/irqs.h> #include <mach/map.h> -#include <linux/platform_data/usb-exynos.h> #include <plat/devs.h> #include <plat/usb-phy.h> diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c index 2e85c022fd16..7c42f4b7c8be 100644 --- a/arch/arm/mach-exynos/dev-uart.c +++ b/arch/arm/mach-exynos/dev-uart.c @@ -52,27 +52,3 @@ struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = { .nr_resources = ARRAY_SIZE(exynos4_uart3_resource), }, }; - -EXYNOS_UART_RESOURCE(5, 0) -EXYNOS_UART_RESOURCE(5, 1) -EXYNOS_UART_RESOURCE(5, 2) -EXYNOS_UART_RESOURCE(5, 3) - -struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = { - [0] = { - .resources = exynos5_uart0_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), - }, - [1] = { - .resources = exynos5_uart1_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), - }, - [2] = { - .resources = exynos5_uart2_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart2_resource), - }, - [3] = { - .resources = exynos5_uart3_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart3_resource), - }, -}; diff --git a/arch/arm/mach-exynos/include/mach/dwmci.h b/arch/arm/mach-exynos/include/mach/dwmci.h deleted file mode 100644 index 7ce657459cc0..000000000000 --- a/arch/arm/mach-exynos/include/mach/dwmci.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Synopsys DesignWare Mobile Storage for EXYNOS4210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_DWMCI_H -#define __ASM_ARM_ARCH_DWMCI_H __FILE__ - -#include <linux/mmc/dw_mmc.h> - -extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd); - -#endif /* __ASM_ARM_ARCH_DWMCI_H */ diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 35bced6f9092..e0f0ae3e0cf9 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -259,11 +259,6 @@ #define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48) #define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49) #define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50) -#define EXYNOS5_IRQ_UART0 IRQ_SPI(51) -#define EXYNOS5_IRQ_UART1 IRQ_SPI(52) -#define EXYNOS5_IRQ_UART2 IRQ_SPI(53) -#define EXYNOS5_IRQ_UART3 IRQ_SPI(54) -#define EXYNOS5_IRQ_UART4 IRQ_SPI(55) #define EXYNOS5_IRQ_IIC IRQ_SPI(56) #define EXYNOS5_IRQ_IIC1 IRQ_SPI(57) #define EXYNOS5_IRQ_IIC2 IRQ_SPI(58) @@ -333,6 +328,11 @@ #define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126) #define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127) +/* EXYNOS5440 */ + +#define EXYNOS5440_IRQ_UART0 IRQ_SPI(2) +#define EXYNOS5440_IRQ_UART1 IRQ_SPI(3) + #define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2) #define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index ed4da4544cd2..61b74e12d12b 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -53,6 +53,7 @@ #define EXYNOS4_PA_ONENAND_DMA 0x0C600000 #define EXYNOS_PA_CHIPID 0x10000000 +#define EXYNOS5440_PA_CHIPID 0x00160000 #define EXYNOS4_PA_SYSCON 0x10010000 #define EXYNOS5_PA_SYSCON 0x10050100 @@ -280,7 +281,10 @@ #define EXYNOS5_PA_UART1 0x12C10000 #define EXYNOS5_PA_UART2 0x12C20000 #define EXYNOS5_PA_UART3 0x12C30000 -#define EXYNOS5_SZ_UART SZ_256 + +#define EXYNOS5440_PA_UART0 0x000B0000 +#define EXYNOS5440_PA_UART1 0x000C0000 +#define EXYNOS5440_SZ_UART SZ_256 #define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) diff --git a/arch/arm/mach-exynos/include/mach/regs-mem.h b/arch/arm/mach-exynos/include/mach/regs-mem.h deleted file mode 100644 index 0368b5a27252..000000000000 --- a/arch/arm/mach-exynos/include/mach/regs-mem.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - SROMC and DMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_MEM_H -#define __ASM_ARCH_REGS_MEM_H __FILE__ - -#include <mach/map.h> - -#define S5P_DMC0_MEMCON_OFFSET 0x04 - -#define S5P_DMC0_MEMTYPE_SHIFT 8 -#define S5P_DMC0_MEMTYPE_MASK 0xF - -#endif /* __ASM_ARCH_REGS_MEM_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index d4e392b811a3..84428e72cf5e 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -31,6 +31,7 @@ #define S5P_SWRESET S5P_PMUREG(0x0400) #define EXYNOS_SWRESET S5P_PMUREG(0x0400) +#define EXYNOS5440_SWRESET S5P_PMUREG(0x00C4) #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) @@ -230,8 +231,6 @@ /* For EXYNOS5 */ -#define EXYNOS5_USB_CFG S5P_PMUREG(0x0230) - #define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) #define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C) diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index eadf4b59e7d2..6df99c06419d 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -77,6 +77,7 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL), {}, }; diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index db1cd8eacf28..f1326be80b91 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -10,6 +10,7 @@ */ #include <linux/of_platform.h> +#include <linux/of_fdt.h> #include <linux/serial_core.h> #include <asm/mach/arch.h> @@ -75,20 +76,35 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { {}, }; -static void __init exynos5250_dt_map_io(void) +static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0, + "exynos4210-uart.0", NULL), + {}, +}; + +static void __init exynos5_dt_map_io(void) { + unsigned long root = of_get_flat_dt_root(); + exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + + if (of_flat_dt_is_compatible(root, "samsung,exynos5250")) + s3c24xx_init_clocks(24000000); } -static void __init exynos5250_dt_machine_init(void) +static void __init exynos5_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - exynos5250_auxdata_lookup, NULL); + if (of_machine_is_compatible("samsung,exynos5250")) + of_platform_populate(NULL, of_default_bus_match_table, + exynos5250_auxdata_lookup, NULL); + else if (of_machine_is_compatible("samsung,exynos5440")) + of_platform_populate(NULL, of_default_bus_match_table, + exynos5440_auxdata_lookup, NULL); } -static char const *exynos5250_dt_compat[] __initdata = { +static char const *exynos5_dt_compat[] __initdata = { "samsung,exynos5250", + "samsung,exynos5440", NULL }; @@ -96,11 +112,11 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .init_irq = exynos5_init_irq, .smp = smp_ops(exynos_smp_ops), - .map_io = exynos5250_dt_map_io, + .map_io = exynos5_dt_map_io, .handle_irq = gic_handle_irq, - .init_machine = exynos5250_dt_machine_init, + .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, .timer = &exynos4_timer, - .dt_compat = exynos5250_dt_compat, + .dt_compat = exynos5_dt_compat, .restart = exynos5_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index c05d7aa84031..69359a0c8a1c 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -25,7 +25,10 @@ #include <linux/mmc/host.h> #include <linux/fb.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mipi-csis.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> #include <drm/exynos_drm.h> #include <video/platform_lcd.h> @@ -45,14 +48,11 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/sdhci.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/mfc.h> #include <plat/fimc-core.h> #include <plat/camport.h> -#include <linux/platform_data/mipi-csis.h> #include <mach/map.h> @@ -113,7 +113,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE), - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 9adf491674ea..c606080b5dfa 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -23,7 +23,10 @@ #include <linux/mfd/max8997.h> #include <linux/lcd.h> #include <linux/rfkill-gpio.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> +#include <linux/platform_data/usb-exynos.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -36,8 +39,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> @@ -45,7 +46,6 @@ #include <plat/mfc.h> #include <plat/hdmi.h> -#include <linux/platform_data/usb-exynos.h> #include <mach/map.h> #include <drm/exynos_drm.h> @@ -100,6 +100,7 @@ static struct regulator_consumer_supply __initdata ldo3_consumer[] = { REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */ REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */ REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */ + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */ }; static struct regulator_consumer_supply __initdata ldo6_consumer[] = { REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */ @@ -110,6 +111,7 @@ static struct regulator_consumer_supply __initdata ldo7_consumer[] = { static struct regulator_consumer_supply __initdata ldo8_consumer[] = { REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */ + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */ }; static struct regulator_consumer_supply __initdata ldo9_consumer[] = { REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index 730f1ac65928..ddb92631252d 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -21,6 +21,7 @@ #include <linux/pwm_backlight.h> #include <linux/regulator/machine.h> #include <linux/serial_core.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> @@ -34,7 +35,6 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> #include <plat/mfc.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index ee4fb1a9cb72..8dd6a1e8030d 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -20,7 +20,10 @@ #include <linux/input.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> +#include <linux/platform_data/usb-exynos.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -35,16 +38,13 @@ #include <plat/fb.h> #include <plat/keypad.h> #include <plat/sdhci.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> #include <plat/mfc.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/hdmi.h> #include <mach/map.h> -#include <linux/platform_data/usb-exynos.h> #include <drm/exynos_drm.h> #include "common.h" diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index ebc9dd339a38..2d6bc83d5c99 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -23,6 +23,8 @@ #include <linux/i2c-gpio.h> #include <linux/i2c/mcs.h> #include <linux/i2c/atmel_mxt_ts.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mipi-csis.h> #include <linux/platform_data/s3c-hsotg.h> #include <drm/exynos_drm.h> @@ -35,7 +37,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/fb.h> #include <plat/mfc.h> @@ -43,7 +44,6 @@ #include <plat/fimc-core.h> #include <plat/s5p-time.h> #include <plat/camport.h> -#include <linux/platform_data/mipi-csis.h> #include <mach/map.h> @@ -754,7 +754,6 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index b601fb8a408b..57668eb68e75 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -19,7 +19,9 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/percpu.h> +#include <linux/of.h> +#include <asm/arch_timer.h> #include <asm/hardware/gic.h> #include <asm/localtimer.h> @@ -476,8 +478,13 @@ static void __init exynos4_timer_resources(void) #endif /* CONFIG_LOCAL_TIMERS */ } -static void __init exynos4_timer_init(void) +static void __init exynos_timer_init(void) { + if (soc_is_exynos5440()) { + arch_timer_of_register(); + return; + } + if ((soc_is_exynos4210()) || (soc_is_exynos5250())) mct_int_type = MCT_INT_SPI; else @@ -489,5 +496,5 @@ static void __init exynos4_timer_init(void) } struct sys_timer exynos4_timer = { - .init = exynos4_timer_init, + .init = exynos_timer_init, }; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index f93d820ecab5..4ca8ff14a5bf 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -36,8 +36,22 @@ extern void exynos4_secondary_startup(void); -#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM5 : S5P_VA_SYSRAM) +static inline void __iomem *cpu_boot_reg_base(void) +{ + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) + return S5P_INFORM5; + return S5P_VA_SYSRAM; +} + +static inline void __iomem *cpu_boot_reg(int cpu) +{ + void __iomem *boot_reg; + + boot_reg = cpu_boot_reg_base(); + if (soc_is_exynos4412()) + boot_reg += 4*cpu; + return boot_reg; +} /* * Write pen_release in a way that is guaranteed to be visible to all @@ -84,6 +98,7 @@ static void __cpuinit exynos_secondary_init(unsigned int cpu) static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; + unsigned long phys_cpu = cpu_logical_map(cpu); /* * Set synchronisation state between this boot processor @@ -99,7 +114,7 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct * Note that "pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - write_pen_release(cpu_logical_map(cpu)); + write_pen_release(phys_cpu); if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { __raw_writel(S5P_CORE_LOCAL_PWR_EN, @@ -133,7 +148,7 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct smp_rmb(); __raw_writel(virt_to_phys(exynos4_secondary_startup), - CPU1_BOOT_REG); + cpu_boot_reg(phys_cpu)); gic_raise_softirq(cpumask_of(cpu), 0); if (pen_release == -1) @@ -181,6 +196,8 @@ static void __init exynos_smp_init_cpus(void) static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { + int i; + if (!soc_is_exynos5250()) scu_enable(scu_base_addr()); @@ -190,8 +207,9 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(virt_to_phys(exynos4_secondary_startup), - CPU1_BOOT_REG); + for (i = 1; i < max_cpus; ++i) + __raw_writel(virt_to_phys(exynos4_secondary_startup), + cpu_boot_reg(cpu_logical_map(i))); } struct smp_operations exynos_smp_ops __initdata = { diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c index 5700f23629f7..e2d9dfbf102c 100644 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ b/arch/arm/mach-exynos/setup-i2c0.c @@ -20,7 +20,7 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - if (soc_is_exynos5250()) + if (soc_is_exynos5250() || soc_is_exynos5440()) /* will be implemented with gpio function */ return; diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 0e1d0a42a3ea..551c97e87a78 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,5 @@ config ARCH_HIGHBANK - bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7 + bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index 3ec8bdd25d09..8a1ef576d79f 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -3,7 +3,6 @@ obj-y := highbank.o system.o smc.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) -obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_SLEEP) += pm.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index 286ec82a4f63..80235b46cb58 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -1,12 +1,10 @@ +#ifndef __HIGHBANK_CORE_H +#define __HIGHBANK_CORE_H + extern void highbank_set_cpu_jump(int cpu, void *jump_addr); extern void highbank_clocks_init(void); extern void highbank_restart(char, const char *); extern void __iomem *scu_base_addr; -#ifdef CONFIG_DEBUG_HIGHBANK_UART -extern void highbank_lluart_map_io(void); -#else -static inline void highbank_lluart_map_io(void) {} -#endif #ifdef CONFIG_PM_SLEEP extern void highbank_pm_init(void); @@ -18,3 +16,5 @@ extern void highbank_smc1(int fn, int arg); extern void highbank_cpu_die(unsigned int cpu); extern struct smp_operations highbank_smp_ops; + +#endif diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 40e36a50304c..dc248167d206 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -26,9 +26,9 @@ #include <linux/smp.h> #include <linux/amba/bus.h> +#include <asm/arch_timer.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <asm/smp_scu.h> #include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> @@ -42,16 +42,7 @@ #include "sysregs.h" void __iomem *sregs_base; - -#define HB_SCU_VIRT_BASE 0xfee00000 -void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE)); - -static struct map_desc scu_io_desc __initdata = { - .virtual = HB_SCU_VIRT_BASE, - .pfn = 0, /* run-time */ - .length = SZ_4K, - .type = MT_DEVICE, -}; +void __iomem *scu_base_addr; static void __init highbank_scu_map_io(void) { @@ -60,14 +51,7 @@ static void __init highbank_scu_map_io(void) /* Get SCU base */ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); - scu_io_desc.pfn = __phys_to_pfn(base); - iotable_init(&scu_io_desc, 1); -} - -static void __init highbank_map_io(void) -{ - highbank_scu_map_io(); - highbank_lluart_map_io(); + scu_base_addr = ioremap(base, SZ_4K); } #define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu))) @@ -83,6 +67,7 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr) } const static struct of_device_id irq_match[] = { + { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, {} }; @@ -99,6 +84,9 @@ static void __init highbank_init_irq(void) { of_irq_init(irq_match); + if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) + highbank_scu_map_io(); + #ifdef CONFIG_CACHE_L2X0 /* Enable PL310 L2 Cache controller */ highbank_smc1(0x102, 0x1); @@ -136,6 +124,9 @@ static void __init highbank_timer_init(void) sp804_clockevents_init(timer_base, irq, "timer0"); twd_local_timer_of_register(); + + arch_timer_of_register(); + arch_timer_sched_clock_init(); } static struct sys_timer highbank_timer = { @@ -145,7 +136,6 @@ static struct sys_timer highbank_timer = { static void highbank_power_off(void) { hignbank_set_pwr_shutdown(); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); while (1) cpu_do_idle(); @@ -211,12 +201,13 @@ static void __init highbank_init(void) static const char *highbank_match[] __initconst = { "calxeda,highbank", + "calxeda,ecx-2000", NULL, }; DT_MACHINE_START(HIGHBANK, "Highbank") .smp = smp_ops(highbank_smp_ops), - .map_io = highbank_map_io, + .map_io = debug_ll_io_init, .init_irq = highbank_init_irq, .timer = &highbank_timer, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index 2c1b8c3c8e45..7b60faccd551 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -14,13 +14,11 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> -#include <asm/smp_scu.h> #include <asm/cacheflush.h> #include "core.h" +#include "sysregs.h" extern void secondary_startup(void); @@ -33,7 +31,7 @@ void __ref highbank_cpu_die(unsigned int cpu) flush_cache_all(); highbank_set_cpu_jump(cpu, secondary_startup); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); + highbank_set_core_pwr(); cpu_do_idle(); diff --git a/arch/arm/mach-highbank/lluart.c b/arch/arm/mach-highbank/lluart.c deleted file mode 100644 index 371575019f33..000000000000 --- a/arch/arm/mach-highbank/lluart.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/init.h> -#include <asm/page.h> -#include <asm/sizes.h> -#include <asm/mach/map.h> - -#define HB_DEBUG_LL_PHYS_BASE 0xfff36000 -#define HB_DEBUG_LL_VIRT_BASE 0xfee36000 - -static struct map_desc lluart_io_desc __initdata = { - .virtual = HB_DEBUG_LL_VIRT_BASE, - .pfn = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, -}; - -void __init highbank_lluart_map_io(void) -{ - iotable_init(&lluart_io_desc, 1); -} diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index fa9560ec6e70..1129957f6c1d 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -42,9 +42,7 @@ static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struc */ static void __init highbank_smp_init_cpus(void) { - unsigned int i, ncores; - - ncores = scu_get_core_count(scu_base_addr); + unsigned int i, ncores = 4; /* sanity check */ if (ncores > NR_CPUS) { @@ -65,7 +63,8 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) { int i; - scu_enable(scu_base_addr); + if (scu_base_addr) + scu_enable(scu_base_addr); /* * Write the address of secondary startup into the jump table diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index de866f21331f..74aa135966f0 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -19,7 +19,6 @@ #include <linux/suspend.h> #include <asm/proc-fns.h> -#include <asm/smp_scu.h> #include <asm/suspend.h> #include "core.h" @@ -35,8 +34,6 @@ static int highbank_pm_enter(suspend_state_t state) { hignbank_set_pwr_suspend(); highbank_set_cpu_jump(0, cpu_resume); - - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); cpu_suspend(0, highbank_suspend_finish); return 0; diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h index 0e913389f445..e13e8ea7c6cb 100644 --- a/arch/arm/mach-highbank/sysregs.h +++ b/arch/arm/mach-highbank/sysregs.h @@ -17,6 +17,10 @@ #define _MACH_HIGHBANK__SYSREGS_H_ #include <linux/io.h> +#include <linux/smp.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> +#include "core.h" extern void __iomem *sregs_base; @@ -29,24 +33,39 @@ extern void __iomem *sregs_base; #define HB_PWR_HARD_RESET 2 #define HB_PWR_SHUTDOWN 3 +#define SREG_CPU_PWR_CTRL(c) (0x200 + ((c) * 4)) + +static inline void highbank_set_core_pwr(void) +{ + int cpu = cpu_logical_map(smp_processor_id()); + if (scu_base_addr) + scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); + else + writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu)); +} + static inline void hignbank_set_pwr_suspend(void) { writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_shutdown(void) { writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_soft_reset(void) { writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } static inline void hignbank_set_pwr_hard_reset(void) { writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_set_core_pwr(); } #endif diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 86e37cd9376c..aed96ad9bd4a 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -14,7 +14,6 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/io.h> -#include <asm/smp_scu.h> #include <asm/proc-fns.h> #include "core.h" @@ -27,7 +26,6 @@ void highbank_restart(char mode, const char *cmd) else hignbank_set_pwr_soft_reset(); - scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); while (1) cpu_do_idle(); } diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index 5c10ad05df74..134377352966 100644 --- a/arch/arm/plat-mxc/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -21,7 +21,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> -#include <mach/hardware.h> +#include "hardware.h" /* LAN9217 ethernet base address */ #define LAN9217_BASE_ADDR(n) (n + 0x0) diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h index 9fd6cb3f8fad..9fd6cb3f8fad 100644 --- a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h +++ b/arch/arm/mach-imx/3ds_debugboard.h diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8d276584650e..4e24b8c77eb4 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,3 +1,70 @@ +config ARCH_MXC + bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 + select ARCH_REQUIRE_GPIOLIB + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR if !ZBOOT_ROM + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select USE_OF + help + Support for Freescale MXC/iMX-based family of processors + +menu "Freescale i.MX support" + depends on ARCH_MXC + +config MXC_IRQ_PRIOR + bool "Use IRQ priority" + help + Select this if you want to use prioritized IRQ handling. + This feature prevents higher priority ISR to be interrupted + by lower priority IRQ even IRQF_DISABLED flag is not set. + This may be useful in embedded applications, where are strong + requirements for timing. + Say N here, unless you have a specialized requirement. + +config MXC_TZIC + bool + +config MXC_AVIC + bool + +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + +config HAVE_EPIT + bool + +config MXC_USE_EPIT + bool "Use EPIT instead of GPT" + depends on HAVE_EPIT + help + Use EPIT as the system timer on systems that have it. Normally you + don't have a reason to do so as the EPIT has the same features and + uses the same clocks as the GPT. Anyway, on some systems the GPT + may be in use for other purposes. + +config MXC_ULPI + bool + +config ARCH_HAS_RNGA + bool + +config IRAM_ALLOC + bool + select GENERIC_ALLOCATOR + config HAVE_IMX_GPC bool @@ -5,6 +72,12 @@ config HAVE_IMX_MMDC bool config HAVE_IMX_SRC + def_bool y if SMP + +config IMX_HAVE_IOMUX_V1 + bool + +config ARCH_MXC_IOMUX_V3 bool config ARCH_MX1 @@ -104,7 +177,7 @@ config SOC_IMX51 select PINCTRL_IMX51 select SOC_IMX5 -if ARCH_IMX_V4_V5 +if ARCH_MULTI_V4T comment "MX1 platforms:" config MACH_MXLADS @@ -133,6 +206,10 @@ config MACH_APF9328 help Say Yes here if you are using the Armadeus APF9328 development board +endif + +if ARCH_MULTI_V5 + comment "MX21 platforms:" config MACH_MX21ADS @@ -317,6 +394,7 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA + select IMX_HAVE_PLATFORM_MX2_EMMA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select LEDS_GPIO_REGISTER @@ -384,7 +462,7 @@ config MACH_IMX27_DT endif -if ARCH_IMX_V6_V7 +if ARCH_MULTI_V6 comment "MX31 platforms:" @@ -649,6 +727,10 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +endif + +if ARCH_MULTI_V7 + comment "i.MX5 platforms:" config MACH_MX50_RDP @@ -739,6 +821,7 @@ config SOC_IMX53 select ARCH_MX5 select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN + select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL select PINCTRL_IMX53 select SOC_IMX5 @@ -756,7 +839,6 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC - select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL @@ -766,3 +848,7 @@ config SOC_IMX6Q This enables support for Freescale i.MX6 Quad processor. endif + +source "arch/arm/mach-imx/devices/Kconfig" + +endmenu diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 895754aeb4f3..fe47b71469c9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,3 +1,5 @@ +obj-y := time.o cpu.o system.o irq-common.o + obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o @@ -15,6 +17,24 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(i obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o +obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o +obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o + +obj-$(CONFIG_MXC_TZIC) += tzic.o +obj-$(CONFIG_MXC_AVIC) += avic.o + +obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o +obj-$(CONFIG_MXC_ULPI) += ulpi.o +obj-$(CONFIG_MXC_USE_EPIT) += epit.o +obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o +obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o + +ifdef CONFIG_SND_IMX_SOC +obj-y += ssi-fiq.o +obj-y += ssi-fiq-ksym.o +endif + # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -89,3 +109,5 @@ obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o + +obj-y += devices/ diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/mach-imx/avic.c index cbd55c36def3..0eff23ed92b9 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -22,12 +22,11 @@ #include <linux/irqdomain.h> #include <linux/io.h> #include <linux/of.h> -#include <mach/common.h> #include <asm/mach/irq.h> #include <asm/exception.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "common.h" +#include "hardware.h" #include "irq-common.h" #define AVIC_INTCNTL 0x00 /* int control reg */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h index 0df71bfefbb1..0df71bfefbb1 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h +++ b/arch/arm/mach-imx/board-mx31lilly.h diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h index c1ad0ae807cc..c1ad0ae807cc 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/mach-imx/board-mx31lite.h diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h index de14543891cf..de14543891cf 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/mach-imx/board-mx31moboard.h diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h index 6f371e35753d..6f371e35753d 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ b/arch/arm/mach-imx/board-pcm038.h diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 516ddee1948e..15f9d223cf0b 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -22,9 +22,9 @@ #include <linux/clkdev.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> #include "clk.h" +#include "common.h" +#include "hardware.h" /* CCM register addresses */ #define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off))) @@ -82,7 +82,8 @@ int __init mx1_clocks_init(unsigned long fref) pr_err("imx1 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma"); + clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma"); + clk_register_clkdev(clk[hclk], "ipg", "imx1-dma"); clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0"); clk_register_clkdev(clk[mma_gate], "mma", NULL); clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0"); @@ -94,18 +95,18 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1"); clk_register_clkdev(clk[per1], "per", "imx1-uart.2"); clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2"); - clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0"); + clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.0"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.1"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1"); clk_register_clkdev(clk[per2], NULL, "imx-mmc.0"); - clk_register_clkdev(clk[per2], "per", "imx-fb.0"); - clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0"); - clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0"); + clk_register_clkdev(clk[per2], "per", "imx1-fb.0"); + clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0"); + clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0"); clk_register_clkdev(clk[hclk], "mshc", NULL); clk_register_clkdev(clk[per3], "ssi", NULL); - clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0"); + clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0"); clk_register_clkdev(clk[clko], "clko", NULL); mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index cf65148bc519..d7ed66091a2a 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -25,9 +25,9 @@ #include <linux/module.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> #include "clk.h" +#include "common.h" +#include "hardware.h" #define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off))) @@ -156,16 +156,16 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1"); clk_register_clkdev(clk[per2], "per", "imx21-cspi.2"); clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2"); - clk_register_clkdev(clk[per3], "per", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0"); + clk_register_clkdev(clk[per3], "per", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0"); clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0"); - clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0"); - clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma"); - clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma"); + clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0"); + clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma"); + clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0"); + clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0"); clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[brom_gate], "brom", NULL); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 01e2f843bf2e..bc885801cd68 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -24,10 +24,10 @@ #include <linux/clkdev.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/mx25.h> #include "clk.h" +#include "common.h" +#include "hardware.h" +#include "mx25.h" #define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR) @@ -197,7 +197,7 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); /* i.mx25 has the i.mx35 type cspi */ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); @@ -212,15 +212,15 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[per10], "per", "mxc_pwm.3"); clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1"); + clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0"); clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0"); clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0"); - clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); + clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); @@ -230,9 +230,9 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1"); clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1"); clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[csi_ipg_per], "per", "mx2-camera.0"); - clk_register_clkdev(clk[csi_ipg], "ipg", "mx2-camera.0"); - clk_register_clkdev(clk[csi_ahb], "ahb", "mx2-camera.0"); + clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0"); + clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0"); + clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0"); clk_register_clkdev(clk[dummy], "audmux", NULL); clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0"); clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 366e5d59d886..4c1d1e4efc74 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -6,9 +6,9 @@ #include <linux/clk-provider.h> #include <linux/of.h> -#include <mach/common.h> -#include <mach/hardware.h> #include "clk.h" +#include "common.h" +#include "hardware.h" #define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off))) @@ -51,8 +51,10 @@ static const char *vpu_sel_clks[] = { "spll", "mpll_main2", }; static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", }; +static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", }; +static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", }; static const char *clko_sel_clks[] = { - "ckil", "prem", "ckih", "ckih", + "ckil", "fpm", "ckih", "ckih", "ckih", "mpll", "spll", "cpu_div", "ahb", "ipg", "per1_div", "per2_div", "per3_div", "per4_div", "ssi1_div", "ssi2_div", @@ -79,7 +81,8 @@ enum mx27_clks { vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate, csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, - uart2_ipg_gate, uart1_ipg_gate, clk_max + uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, + mpll_sel, clk_max }; static struct clk *clk[clk_max]; @@ -91,7 +94,15 @@ int __init mx27_clocks_init(unsigned long fref) clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckih] = imx_clk_fixed("ckih", fref); clk[ckil] = imx_clk_fixed("ckil", 32768); - clk[mpll] = imx_clk_pllv1("mpll", "ckih", CCM_MPCTL0); + clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1); + clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3); + + clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, + mpll_osc_sel_clks, + ARRAY_SIZE(mpll_osc_sel_clks)); + clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, + ARRAY_SIZE(mpll_sel_clks)); + clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0); clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0); clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3); @@ -211,19 +222,20 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5"); clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5"); clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0"); - clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.0"); - clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "mxc-mmc.0"); - clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.1"); - clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.1"); - clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.2"); - clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.2"); + clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0"); + clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0"); + clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1"); + clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1"); + clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2"); + clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2"); clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0"); clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1"); clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2"); - clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); + clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0"); + clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -238,27 +250,27 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0"); clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0"); clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0"); - clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma"); - clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma"); + clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma"); + clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma"); clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0"); clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0"); clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); + clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); - clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0"); clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); - clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc"); + clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], "cpu", NULL); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 1253af2d9971..8be64e0a4ace 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -22,12 +22,11 @@ #include <linux/err.h> #include <linux/of.h> -#include <mach/hardware.h> -#include <mach/mx31.h> -#include <mach/common.h> - #include "clk.h" +#include "common.h" #include "crmregs-imx3.h" +#include "hardware.h" +#include "mx31.h" static const char *mcu_main_sel[] = { "spll", "mpll", }; static const char *per_sel[] = { "per_div", "ipg", }; @@ -124,10 +123,10 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2"); clk_register_clkdev(clk[pwm_gate], "pwm", NULL); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc"); + clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc"); clk_register_clkdev(clk[epit1_gate], "epit", NULL); clk_register_clkdev(clk[epit2_gate], "epit", NULL); - clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); @@ -155,12 +154,12 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3"); clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); + clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); - clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0"); - clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1"); + clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0"); + clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1"); clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[firi_gate], "firi", NULL); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 177259b523cd..66f3d65ea275 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -14,11 +14,10 @@ #include <linux/of.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> - #include "crmregs-imx3.h" #include "clk.h" +#include "common.h" +#include "hardware.h" struct arm_ahb_div { unsigned char arm, ahb, sel; @@ -226,9 +225,9 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); + clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); @@ -256,7 +255,7 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); clk_prepare_enable(clk[spba_gate]); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index a0bf84803eac..e8c0473c7568 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -14,11 +14,10 @@ #include <linux/of.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> - #include "crm-regs-imx5.h" #include "clk.h" +#include "common.h" +#include "hardware.h" /* Low-power Audio Playback Mode clock */ static const char *lp_apm_sel[] = { "osc", }; @@ -88,6 +87,7 @@ enum imx5_clks { }; static struct clk *clk[clk_max]; +static struct clk_onecell_data clk_data; static void __init mx5_clocks_common_init(unsigned long rate_ckil, unsigned long rate_osc, unsigned long rate_ckih1, @@ -258,8 +258,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2"); clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0"); clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1"); + clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0"); clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0"); @@ -272,7 +272,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand"); + clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); @@ -306,6 +306,10 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ clk_prepare_enable(clk[emi_slow_gate]); /* eim */ + clk_prepare_enable(clk[mipi_hsc1_gate]); + clk_prepare_enable(clk[mipi_hsc2_gate]); + clk_prepare_enable(clk[mipi_esc_gate]); + clk_prepare_enable(clk[mipi_hsp_gate]); clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ @@ -315,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, unsigned long rate_ckih1, unsigned long rate_ckih2) { int i; + struct device_node *np; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE); clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE); @@ -343,16 +348,20 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, pr_err("i.MX51 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-ccm"); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); - clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL); clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu"); - clk_register_clkdev(clk[ipu_gate], "hsp", "imx51-ipu"); + clk_register_clkdev(clk[ipu_gate], "bus", "40000000.ipu"); + clk_register_clkdev(clk[ipu_di0_gate], "di0", "40000000.ipu"); + clk_register_clkdev(clk[ipu_di1_gate], "di1", "40000000.ipu"); clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0"); @@ -366,10 +375,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3"); clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3"); - clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi"); - clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi"); - clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi"); - clk_register_clkdev(clk[nfc_gate], NULL, "83fdb000.nand"); /* set the usboh3 parent to pll2_sw */ clk_set_parent(clk[usboh3_sel], clk[pll2_sw]); @@ -393,6 +398,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, { int i; unsigned long r; + struct device_node *np; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -437,15 +443,20 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, pr_err("i.MX53 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm"); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx53-ipu"); - clk_register_clkdev(clk[ipu_gate], "hsp", "imx53-ipu"); + clk_register_clkdev(clk[ipu_gate], "bus", "18000000.ipu"); + clk_register_clkdev(clk[ipu_di0_gate], "di0", "18000000.ipu"); + clk_register_clkdev(clk[ipu_di1_gate], "di1", "18000000.ipu"); + clk_register_clkdev(clk[ipu_gate], "hsp", "18000000.ipu"); clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0"); @@ -459,14 +470,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3"); clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3"); - clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); - clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); - clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); - clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand"); - clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can"); - clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can"); - clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can"); - clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 3ec242f3341e..448476958e7f 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -19,8 +19,9 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <mach/common.h> + #include "clk.h" +#include "common.h" #define CCGR0 0x68 #define CCGR1 0x6c @@ -104,7 +105,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m" static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; @@ -151,8 +152,9 @@ enum mx6q_clks { gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1, ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, - pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, + pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, + sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, clk_max }; @@ -163,6 +165,13 @@ static enum mx6q_clks const clks_init_on[] __initconst = { mmdc_ch0_axi, rom, }; +static struct clk_div_table clk_enet_ref_table[] = { + { .val = 0, .div = 20, }, + { .val = 1, .div = 10, }, + { .val = 2, .div = 5, }, + { .val = 3, .div = 4, }, +}; + int __init mx6q_clocks_init(void) { struct device_node *np; @@ -189,19 +198,29 @@ int __init mx6q_clocks_init(void) base = of_iomap(np, 0); WARN_ON(!base); - /* type name parent_name base gate_mask div_mask */ - clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x2000, 0x7f); - clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x2000, 0x1); - clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x2000, 0x3); - clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x2000, 0x7f); - clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x2000, 0x7f); - clk[pll6_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll6_mlb", "osc", base + 0xd0, 0x2000, 0x0); - clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3); - clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3); + /* type name parent_name base div_mask */ + clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); + clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); + clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); + clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); + clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); + clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); + clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3); + clk[pll8_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll8_mlb", "osc", base + 0xd0, 0x0); clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6); clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6); + clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5); + clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4); + + clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20); + clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); + + clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, + base + 0xe0, 0, 2, 0, clk_enet_ref_table, + &imx_ccm_lock); + /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); @@ -357,7 +376,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll6_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index 02be73178912..abff350ba24c 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -4,10 +4,10 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/err.h> -#include <mach/common.h> -#include <mach/hardware.h> #include "clk.h" +#include "common.h" +#include "hardware.h" /** * pll v1 diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index 36aac947bce1..d09bc3df9a7a 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -31,7 +31,6 @@ * @clk_hw: clock source * @base: base address of PLL registers * @powerup_set: set POWER bit to power up the PLL - * @gate_mask: mask of gate bits * @div_mask: mask of divider bits * * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3 @@ -41,7 +40,6 @@ struct clk_pllv3 { struct clk_hw hw; void __iomem *base; bool powerup_set; - u32 gate_mask; u32 div_mask; }; @@ -89,7 +87,7 @@ static int clk_pllv3_enable(struct clk_hw *hw) u32 val; val = readl_relaxed(pll->base); - val |= pll->gate_mask; + val |= BM_PLL_ENABLE; writel_relaxed(val, pll->base); return 0; @@ -101,7 +99,7 @@ static void clk_pllv3_disable(struct clk_hw *hw) u32 val; val = readl_relaxed(pll->base); - val &= ~pll->gate_mask; + val &= ~BM_PLL_ENABLE; writel_relaxed(val, pll->base); } @@ -287,66 +285,7 @@ static const struct clk_ops clk_pllv3_av_ops = { static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 div = readl_relaxed(pll->base) & pll->div_mask; - - switch (div) { - case 0: - return 25000000; - case 1: - return 50000000; - case 2: - return 100000000; - case 3: - return 125000000; - } - - return 0; -} - -static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - if (rate >= 125000000) - rate = 125000000; - else if (rate >= 100000000) - rate = 100000000; - else if (rate >= 50000000) - rate = 50000000; - else - rate = 25000000; - return rate; -} - -static int clk_pllv3_enet_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val, div; - - switch (rate) { - case 25000000: - div = 0; - break; - case 50000000: - div = 1; - break; - case 100000000: - div = 2; - break; - case 125000000: - div = 3; - break; - default: - return -EINVAL; - } - - val = readl_relaxed(pll->base); - val &= ~pll->div_mask; - val |= div; - writel_relaxed(val, pll->base); - - return 0; + return 500000000; } static const struct clk_ops clk_pllv3_enet_ops = { @@ -355,8 +294,6 @@ static const struct clk_ops clk_pllv3_enet_ops = { .enable = clk_pllv3_enable, .disable = clk_pllv3_disable, .recalc_rate = clk_pllv3_enet_recalc_rate, - .round_rate = clk_pllv3_enet_round_rate, - .set_rate = clk_pllv3_enet_set_rate, }; static const struct clk_ops clk_pllv3_mlb_ops = { @@ -368,7 +305,7 @@ static const struct clk_ops clk_pllv3_mlb_ops = { struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, const char *parent_name, void __iomem *base, - u32 gate_mask, u32 div_mask) + u32 div_mask) { struct clk_pllv3 *pll; const struct clk_ops *ops; @@ -400,7 +337,6 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, ops = &clk_pllv3_ops; } pll->base = base; - pll->gate_mask = gate_mask; pll->div_mask = div_mask; init.name = name; diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 5f2d8acca25f..9d1f3b99d1d3 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -22,8 +22,7 @@ enum imx_pllv3_type { }; struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, - const char *parent_name, void __iomem *base, u32 gate_mask, - u32 div_mask); + const char *parent_name, void __iomem *base, u32 div_mask); struct clk *clk_register_gate2(struct device *dev, const char *name, const char *parent_name, unsigned long flags, diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/mach-imx/common.h index ead901814c0d..ef8db6b34841 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/mach-imx/common.h @@ -79,6 +79,7 @@ extern void mxc_arch_reset_init(void __iomem *); extern int mx53_revision(void); extern int mx53_display_revision(void); extern void imx_set_aips(void __iomem *); +extern int mxc_device_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index 6914bcbf84e4..96ec64b5ff7d 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -11,8 +11,9 @@ */ #include <linux/module.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/iim.h> + +#include "iim.h" +#include "hardware.h" static int mx25_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index ff38e1505f67..fe8d36f7e30e 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -24,7 +24,7 @@ #include <linux/io.h> #include <linux/module.h> -#include <mach/hardware.h> +#include "hardware.h" static int mx27_cpu_rev = -1; static int mx27_cpu_partnumber; diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index 3f2345f0cdaf..fde1860a2521 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -11,9 +11,10 @@ #include <linux/module.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/iim.h> -#include <mach/common.h> + +#include "common.h" +#include "hardware.h" +#include "iim.h" static int mx31_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index 846e46eb8cbf..ec3aaa098c17 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -10,8 +10,9 @@ */ #include <linux/module.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/iim.h> + +#include "hardware.h" +#include "iim.h" static int mx35_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index 8eb15a2fcaf9..d88760014ff9 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -15,9 +15,10 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> -#include <mach/hardware.h> #include <linux/io.h> +#include "hardware.h" + static int mx5_cpu_rev = -1; #define IIM_SREV 0x24 diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/mach-imx/cpu.c index 220dd6f93126..03fcbd082593 100644 --- a/arch/arm/plat-mxc/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -1,7 +1,8 @@ #include <linux/module.h> #include <linux/io.h> -#include <mach/hardware.h> + +#include "hardware.h" unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c index 7b92cd6da6d3..b9ef692b61a2 100644 --- a/arch/arm/mach-imx/cpu_op-mx51.c +++ b/arch/arm/mach-imx/cpu_op-mx51.c @@ -13,9 +13,10 @@ #include <linux/bug.h> #include <linux/types.h> -#include <mach/hardware.h> #include <linux/kernel.h> +#include "hardware.h" + static struct cpu_op mx51_cpu_op[] = { { .cpu_rate = 160000000,}, diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index b5b6f8083130..36e8b3994470 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -22,7 +22,8 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/slab.h> -#include <mach/hardware.h> + +#include "hardware.h" #define CLK32_FREQ 32768 #define NANOSECOND (1000 * 1000 * 1000) diff --git a/arch/arm/plat-mxc/cpuidle.c b/arch/arm/mach-imx/cpuidle.c index d4cb511a44a8..d4cb511a44a8 100644 --- a/arch/arm/plat-mxc/cpuidle.c +++ b/arch/arm/mach-imx/cpuidle.c diff --git a/arch/arm/plat-mxc/include/mach/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index bc932d1af372..bc932d1af372 100644 --- a/arch/arm/plat-mxc/include/mach/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h index 3aad1e70de96..f9b5afc6bcd1 100644 --- a/arch/arm/mach-imx/devices-imx1.h +++ b/arch/arm/mach-imx/devices-imx1.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx1.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_imx_fb_data imx1_imx_fb_data; #define imx1_add_imx_fb(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 93ece55f75df..bd9393280159 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx21.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; #define imx21_add_imx21_hcd(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index f8e03dd1f116..0d2922bc575c 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx25.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fec_data imx25_fec_data; #define imx25_add_fec(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 04822932cdd1..130962519751 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx27.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fec_data imx27_fec_data; #define imx27_add_fec(pdata) \ @@ -54,8 +53,10 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) + +extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data; #define imx27_add_mx2_emmaprp() \ - imx_add_mx2_emmaprp(&imx27_mx2_camera_data) + imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; #define imx27_add_mxc_ehci_otg(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 8b2ceb45bb83..e8d1611bbc8e 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx31.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; #define imx31_add_fsl_usb2_udc(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index c3e9f206ac2b..e2675f1b141c 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx35.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fec_data imx35_fec_data; #define imx35_add_fec(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h index 7216667eaafc..2c290391f298 100644 --- a/arch/arm/mach-imx/devices-imx50.h +++ b/arch/arm/mach-imx/devices-imx50.h @@ -18,8 +18,7 @@ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ -#include <mach/mx50.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[]; #define imx50_add_imx_uart(id, pdata) \ diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index 9f1718725195..deee5baee88c 100644 --- a/arch/arm/mach-imx/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx51.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fec_data imx51_fec_data; #define imx51_add_fec(pdata) \ diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index a35d9841f494..9a8f1ca7bcb1 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -56,6 +56,9 @@ config IMX_HAVE_PLATFORM_MX1_CAMERA config IMX_HAVE_PLATFORM_MX2_CAMERA bool +config IMX_HAVE_PLATFORM_MX2_EMMA + bool + config IMX_HAVE_PLATFORM_MXC_EHCI bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 76f3195475d0..6acf37e0c119 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -1,3 +1,5 @@ +obj-y := devices.o + obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o @@ -28,3 +30,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index eaf79d220c9a..6277baf1b7be 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -108,6 +108,7 @@ struct platform_device *__init imx_add_imxdi_rtc( #include <linux/platform_data/video-imxfb.h> struct imx_imx_fb_data { + const char *devid; resource_size_t iobase; resource_size_t iosize; resource_size_t irq; @@ -118,6 +119,7 @@ struct platform_device *__init imx_add_imx_fb( #include <linux/platform_data/i2c-imx.h> struct imx_imx_i2c_data { + const char *devid; int id; resource_size_t iobase; resource_size_t iosize; @@ -219,6 +221,7 @@ struct platform_device *__init imx_add_mx1_camera( #include <linux/platform_data/camera-mx2.h> struct imx_mx2_camera_data { + const char *devid; resource_size_t iobasecsi; resource_size_t iosizecsi; resource_size_t irqcsi; @@ -229,8 +232,15 @@ struct imx_mx2_camera_data { struct platform_device *__init imx_add_mx2_camera( const struct imx_mx2_camera_data *data, const struct mx2_camera_platform_data *pdata); + + +struct imx_mx2_emma_data { + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; struct platform_device *__init imx_add_mx2_emmaprp( - const struct imx_mx2_camera_data *data); + const struct imx_mx2_emma_data *data); #include <linux/platform_data/usb-ehci-mxc.h> struct imx_mxc_ehci_data { @@ -244,6 +254,7 @@ struct platform_device *__init imx_add_mxc_ehci( #include <linux/platform_data/mmc-mxcmmc.h> struct imx_mxc_mmc_data { + const char *devid; int id; resource_size_t iobase; resource_size_t iosize; @@ -256,6 +267,7 @@ struct platform_device *__init imx_add_mxc_mmc( #include <linux/platform_data/mtd-mxc_nand.h> struct imx_mxc_nand_data { + const char *devid; /* * id is traditionally 0, but -1 is more appropriate. We use -1 for new * machines but don't change existing devices as the nand device usually @@ -290,6 +302,7 @@ struct platform_device *__init imx_add_mxc_pwm( /* mxc_rtc */ struct imx_mxc_rtc_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; @@ -326,7 +339,8 @@ struct platform_device *__init imx_add_spi_imx( const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); -struct platform_device *imx_add_imx_dma(void); +struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, + int irq, int irq_err); struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/mach-imx/devices/devices.c index 4d55a7a26e98..1b37482407f9 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/mach-imx/devices/devices.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/err.h> #include <linux/platform_device.h> -#include <mach/common.h> struct device mxc_aips_bus = { .init_name = "mxc_aips", @@ -33,7 +32,7 @@ struct device mxc_ahb_bus = { .parent = &platform_bus, }; -static int __init mxc_device_init(void) +int __init mxc_device_init(void) { int ret; @@ -46,4 +45,3 @@ static int __init mxc_device_init(void) done: return ret; } -core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/mach-imx/devices/platform-ahci-imx.c index ade4a1c4e2a3..3d87dd9c284a 100644 --- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c +++ b/arch/arm/mach-imx/devices/platform-ahci-imx.c @@ -24,8 +24,9 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_ahci_imx_data_entry_single(soc, _devid) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c index 0bae44e890db..2cb188ad9a0a 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/mach-imx/devices/platform-fec.c @@ -8,8 +8,9 @@ */ #include <linux/dma-mapping.h> #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_fec_data_entry_single(soc, _devid) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c index 4e8497af2eb1..1078bf0a94ef 100644 --- a/arch/arm/plat-mxc/devices/platform-flexcan.c +++ b/arch/arm/mach-imx/devices/platform-flexcan.c @@ -5,8 +5,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 848038f301fd..37e44398197b 100644 --- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_fsl_usb2_udc_data_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c index a7919a241032..26483fa94b75 100644 --- a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c +++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c @@ -6,7 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/devices-common.h> +#include "devices-common.h" struct platform_device *__init mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) diff --git a/arch/arm/plat-mxc/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c index 1c53a532ea0e..486282539c76 100644 --- a/arch/arm/plat-mxc/devices/platform-gpio_keys.c +++ b/arch/arm/mach-imx/devices/platform-gpio_keys.c @@ -16,8 +16,9 @@ * Boston, MA 02110-1301, USA. */ #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" struct platform_device *__init imx_add_gpio_keys( const struct gpio_keys_platform_data *pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c index 7fa7e9c92468..ccdb5dc4ddbd 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/mach-imx/devices/platform-imx-dma.c @@ -6,12 +6,29 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/devices-common.h> +#include "devices-common.h" -struct platform_device __init __maybe_unused *imx_add_imx_dma(void) +struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name, + resource_size_t iobase, int irq, int irq_err) { + struct resource res[] = { + { + .start = iobase, + .end = iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_err, + .end = irq_err, + .flags = IORESOURCE_IRQ, + }, + }; + return platform_device_register_resndata(&mxc_ahb_bus, - "imx-dma", -1, NULL, 0, NULL, 0); + name, -1, res, ARRAY_SIZE(res), NULL, 0); } struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name, diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 2b0b5e0aa998..10b0ed39f07f 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -7,11 +7,13 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> -#define imx_imx_fb_data_entry_single(soc, _size) \ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx_fb_data_entry_single(soc, _devid, _size) \ { \ + .devid = _devid, \ .iobase = soc ## _LCDC_BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_LCDC, \ @@ -19,22 +21,22 @@ #ifdef CONFIG_SOC_IMX1 const struct imx_imx_fb_data imx1_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX1, SZ_4K); + imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX1 */ #ifdef CONFIG_SOC_IMX21 const struct imx_imx_fb_data imx21_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX21, SZ_4K); + imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ #ifdef CONFIG_SOC_IMX25 const struct imx_imx_fb_data imx25_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX25, SZ_16K); + imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_imx_fb_data imx27_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX27, SZ_4K); + imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX27 */ struct platform_device *__init imx_add_imx_fb( diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index 19ad580c0be3..8e30e5703cd2 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -6,34 +6,35 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" -#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \ +#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \ { \ + .devid = _devid, \ .id = _id, \ .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_I2C ## _hwid, \ } -#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \ - [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) +#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \ + [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) #ifdef CONFIG_SOC_IMX1 const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = - imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K); + imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX1 */ #ifdef CONFIG_SOC_IMX21 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = - imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K); + imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ #ifdef CONFIG_SOC_IMX25 const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { #define imx25_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K) + imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K) imx25_imx_i2c_data_entry(0, 1), imx25_imx_i2c_data_entry(1, 2), imx25_imx_i2c_data_entry(2, 3), @@ -43,7 +44,7 @@ const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX27 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { #define imx27_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K) imx27_imx_i2c_data_entry(0, 1), imx27_imx_i2c_data_entry(1, 2), }; @@ -52,7 +53,7 @@ const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX31 const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { #define imx31_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K) imx31_imx_i2c_data_entry(0, 1), imx31_imx_i2c_data_entry(1, 2), imx31_imx_i2c_data_entry(2, 3), @@ -62,7 +63,7 @@ const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX35 const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { #define imx35_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K) imx35_imx_i2c_data_entry(0, 1), imx35_imx_i2c_data_entry(1, 2), imx35_imx_i2c_data_entry(2, 3), @@ -72,7 +73,7 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX50 const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = { #define imx50_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K) imx50_imx_i2c_data_entry(0, 1), imx50_imx_i2c_data_entry(1, 2), imx50_imx_i2c_data_entry(2, 3), @@ -82,10 +83,11 @@ const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX51 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { #define imx51_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K) imx51_imx_i2c_data_entry(0, 1), imx51_imx_i2c_data_entry(1, 2), { + .devid = "imx21-i2c", .id = 2, .iobase = MX51_HSI2C_DMA_BASE_ADDR, .iosize = SZ_16K, @@ -97,7 +99,7 @@ const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX53 const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = { #define imx53_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K) imx53_imx_i2c_data_entry(0, 1), imx53_imx_i2c_data_entry(1, 2), imx53_imx_i2c_data_entry(2, 3), @@ -120,7 +122,7 @@ struct platform_device *__init imx_add_imx_i2c( }, }; - return imx_add_platform_device("imx-i2c", data->id, + return imx_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c index 479c3e9f771f..8f22a4c98a4c 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c +++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx_keypad_data_entry_single(soc, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c index 21c6f30e1017..bfcb8f3dfa8d 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c +++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \ [_id] = { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index d390f00bd294..67bf866a2cb6 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \ [_id] = { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c index 5e07ef2bf1c4..ec75d6413686 100644 --- a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c +++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c index 5770a42f33bf..30c81616a9a1 100644 --- a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c +++ b/arch/arm/mach-imx/devices/platform-imx21-hcd.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx21_hcd_data_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c index 8b12aacdf396..25bebc29e546 100644 --- a/arch/arm/plat-mxc/devices/platform-imx27-coda.c +++ b/arch/arm/mach-imx/devices/platform-imx27-coda.c @@ -7,8 +7,8 @@ * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #ifdef CONFIG_SOC_IMX27 const struct imx_imx27_coda_data imx27_coda_data __initconst = { diff --git a/arch/arm/plat-mxc/devices/platform-imx_udc.c b/arch/arm/mach-imx/devices/platform-imx_udc.c index 6fd675dfce14..5ced7e4e2c71 100644 --- a/arch/arm/plat-mxc/devices/platform-imx_udc.c +++ b/arch/arm/mach-imx/devices/platform-imx_udc.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx_udc_data_entry_single(soc, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c index 805336fdc252..5bb490d556ea 100644 --- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c +++ b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_imxdi_rtc_data_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c index d1e33cc6f12e..fc4dd7cedc11 100644 --- a/arch/arm/plat-mxc/devices/platform-ipu-core.c +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_ipu_core_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c index edcc581a30a9..2c6788131080 100644 --- a/arch/arm/plat-mxc/devices/platform-mx1-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx1-camera.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mx1_camera_data_entry_single(soc, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c index 11eace953a09..b53e1f348f51 100644 --- a/arch/arm/plat-mxc/devices/platform-mx2-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -6,17 +6,19 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" -#define imx_mx2_camera_data_entry_single(soc) \ +#define imx_mx2_camera_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobasecsi = soc ## _CSI_BASE_ADDR, \ .iosizecsi = SZ_4K, \ .irqcsi = soc ## _INT_CSI, \ } -#define imx_mx2_camera_data_entry_single_emma(soc) \ +#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \ { \ + .devid = _devid, \ .iobasecsi = soc ## _CSI_BASE_ADDR, \ .iosizecsi = SZ_32, \ .irqcsi = soc ## _INT_CSI, \ @@ -27,12 +29,12 @@ #ifdef CONFIG_SOC_IMX25 const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst = - imx_mx2_camera_data_entry_single(MX25); + imx_mx2_camera_data_entry_single(MX25, "imx25-camera"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst = - imx_mx2_camera_data_entry_single_emma(MX27); + imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera"); #endif /* ifdef CONFIG_SOC_IMX27 */ struct platform_device *__init imx_add_mx2_camera( @@ -58,25 +60,8 @@ struct platform_device *__init imx_add_mx2_camera( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("mx2-camera", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, data->iobaseemmaprp ? 4 : 2, pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } -struct platform_device *__init imx_add_mx2_emmaprp( - const struct imx_mx2_camera_data *data) -{ - struct resource res[] = { - { - .start = data->iobaseemmaprp, - .end = data->iobaseemmaprp + data->iosizeemmaprp - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irqemmaprp, - .end = data->irqemmaprp, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask("m2m-emmaprp", 0, - res, 2, NULL, 0, DMA_BIT_MASK(32)); -} diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c index 35851d889aca..5d4bbbfde641 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c +++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_mxc_ehci_data_entry_single(soc, _id, hs) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c index e7b920b58675..b8203c760c8f 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/mach-imx/devices/platform-mxc-mmc.c @@ -7,24 +7,26 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> -#define imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) \ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \ { \ + .devid = _devid, \ .id = _id, \ .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_SDHC ## _hwid, \ .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \ } -#define imx_mxc_mmc_data_entry(soc, _id, _hwid, _size) \ - [_id] = imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) +#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \ + [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) #ifdef CONFIG_SOC_IMX21 const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = { #define imx21_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX21, _id, _hwid, SZ_4K) + imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K) imx21_mxc_mmc_data_entry(0, 1), imx21_mxc_mmc_data_entry(1, 2), }; @@ -33,7 +35,7 @@ const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = { #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = { #define imx27_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX27, _id, _hwid, SZ_4K) + imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K) imx27_mxc_mmc_data_entry(0, 1), imx27_mxc_mmc_data_entry(1, 2), }; @@ -42,7 +44,7 @@ const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = { #ifdef CONFIG_SOC_IMX31 const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = { #define imx31_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX31, _id, _hwid, SZ_16K) + imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K) imx31_mxc_mmc_data_entry(0, 1), imx31_mxc_mmc_data_entry(1, 2), }; @@ -67,7 +69,7 @@ struct platform_device *__init imx_add_mxc_mmc( .flags = IORESOURCE_DMA, }, }; - return imx_add_platform_device_dmamask("mxc-mmc", data->id, + return imx_add_platform_device_dmamask(data->devid, data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c index 95b75cc70515..7af1c53e42b5 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c +++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c @@ -7,18 +7,21 @@ * Free Software Foundation. */ #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> -#define imx_mxc_nand_data_entry_single(soc, _size) \ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \ { \ + .devid = _devid, \ .iobase = soc ## _NFC_BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_NFC \ } -#define imx_mxc_nandv3_data_entry_single(soc, _size) \ +#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \ { \ + .devid = _devid, \ .id = -1, \ .iobase = soc ## _NFC_BASE_ADDR, \ .iosize = _size, \ @@ -28,32 +31,32 @@ #ifdef CONFIG_SOC_IMX21 const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX21, SZ_4K); + imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ #ifdef CONFIG_SOC_IMX25 const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX25, SZ_8K); + imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX27, SZ_4K); + imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX31 const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX31, SZ_4K); + imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K); #endif #ifdef CONFIG_SOC_IMX35 const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX35, SZ_8K); + imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K); #endif #ifdef CONFIG_SOC_IMX51 const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst = - imx_mxc_nandv3_data_entry_single(MX51, SZ_16K); + imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K); #endif struct platform_device *__init imx_add_mxc_nand( @@ -76,7 +79,7 @@ struct platform_device *__init imx_add_mxc_nand( .flags = IORESOURCE_MEM, }, }; - return imx_add_platform_device("mxc_nand", data->id, + return imx_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res) - !data->axibase, pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c b/arch/arm/mach-imx/devices/platform-mxc_pwm.c index b0c4ae298111..dcd289777687 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c +++ b/arch/arm/mach-imx/devices/platform-mxc_pwm.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c b/arch/arm/mach-imx/devices/platform-mxc_rnga.c index b4b7612b6e17..c58404badb59 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c +++ b/arch/arm/mach-imx/devices/platform-mxc_rnga.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" struct imx_mxc_rnga_data { resource_size_t iobase; diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c index a5c9ad5721c2..c7fffaadf847 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c +++ b/arch/arm/mach-imx/devices/platform-mxc_rtc.c @@ -6,23 +6,24 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" -#define imx_mxc_rtc_data_entry_single(soc) \ +#define imx_mxc_rtc_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _RTC_BASE_ADDR, \ .irq = soc ## _INT_RTC, \ } #ifdef CONFIG_SOC_IMX31 const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst = - imx_mxc_rtc_data_entry_single(MX31); + imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc"); #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst = - imx_mxc_rtc_data_entry_single(MX35); + imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc"); #endif /* ifdef CONFIG_SOC_IMX35 */ struct platform_device *__init imx_add_mxc_rtc( @@ -40,6 +41,6 @@ struct platform_device *__init imx_add_mxc_rtc( }, }; - return imx_add_platform_device("mxc_rtc", -1, + return imx_add_platform_device(data->devid, -1, res, ARRAY_SIZE(res), NULL, 0); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c index 96fa5ea91fe8..88c18b720d63 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_w1.c +++ b/arch/arm/mach-imx/devices/platform-mxc_w1.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mxc_w1_data_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c index 70e2f2a44714..e4ec11c8ce55 100644 --- a/arch/arm/plat-mxc/devices/platform-pata_imx.c +++ b/arch/arm/mach-imx/devices/platform-pata_imx.c @@ -3,8 +3,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_pata_imx_data_entry_single(soc, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index 3793e475cd95..e66a4e316311 100644 --- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -6,10 +6,11 @@ * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> #include <linux/platform_data/mmc-esdhc-imx.h> +#include "../hardware.h" +#include "devices-common.h" + #define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \ { \ .devid = _devid, \ diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index 9c50c14c8f92..8880bcb11e05 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \ { \ diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 576af7446952..134c190e3003 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX25_OTG_SIC_SHIFT 29 diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c index cd6e1f81508d..448d9115539d 100644 --- a/arch/arm/mach-imx/ehci-imx27.c +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX27_OTG_SIC_SHIFT 29 diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c index 9a880c78af34..05de4e1e39d7 100644 --- a/arch/arm/mach-imx/ehci-imx31.c +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX31_OTG_SIC_SHIFT 29 diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 293397852e4e..554e7cccff53 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX35_OTG_SIC_SHIFT 29 diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index cf8d00e5cce1..e49710b10c68 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define MXC_OTG_OFFSET 0 #define MXC_H1_OFFSET 0x200 #define MXC_H2_OFFSET 0x400 diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/mach-imx/epit.c index 88726f4dbbfa..04a5961beeac 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -51,10 +51,10 @@ #include <linux/clockchips.h> #include <linux/clk.h> #include <linux/err.h> - -#include <mach/hardware.h> #include <asm/mach/time.h> -#include <mach/common.h> + +#include "common.h" +#include "hardware.h" static struct clock_event_device clockevent_epit; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h index a21d3313f994..a21d3313f994 100644 --- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h +++ b/arch/arm/mach-imx/eukrea-baseboards.h diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 98aef571b9f8..b4c70028d359 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -29,11 +29,10 @@ #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> -#include <mach/hardware.h> - +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int eukrea_mbimx27_pins[] __initconst = { /* UART2 */ diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 0b84666792f0..e2b70f4c1a2c 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -26,14 +26,14 @@ #include <linux/spi/spi.h> #include <video/platform_lcd.h> -#include <mach/hardware.h> -#include <mach/iomux-mx25.h> -#include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mx25.h> +#include "common.h" #include "devices-imx25.h" +#include "hardware.h" +#include "iomux-mx25.h" +#include "mx25.h" static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { /* LCD */ diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index c6532a007d46..5a2d5ef12dd5 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -36,11 +36,10 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> - +#include "common.h" #include "devices-imx35.h" +#include "hardware.h" +#include "iomux-mx35.h" static const struct fb_videomode fb_modedb[] = { { diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c index 8b0de30d7a3f..9be6c1e69d68 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c @@ -36,11 +36,10 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx51.h> - +#include "common.h" #include "devices-imx51.h" +#include "hardware.h" +#include "iomux-mx51.h" static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = { /* LED */ diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/mach-imx/hardware.h index ebf10654bb42..3ce7fa3bd43f 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -105,20 +105,20 @@ #define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x)) -#include <mach/mxc.h> +#include "mxc.h" -#include <mach/mx6q.h> -#include <mach/mx50.h> -#include <mach/mx51.h> -#include <mach/mx53.h> -#include <mach/mx3x.h> -#include <mach/mx31.h> -#include <mach/mx35.h> -#include <mach/mx2x.h> -#include <mach/mx21.h> -#include <mach/mx27.h> -#include <mach/mx1.h> -#include <mach/mx25.h> +#include "mx6q.h" +#include "mx50.h" +#include "mx51.h" +#include "mx53.h" +#include "mx3x.h" +#include "mx31.h" +#include "mx35.h" +#include "mx2x.h" +#include "mx21.h" +#include "mx27.h" +#include "mx1.h" +#include "mx25.h" #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index b07b778dc9a8..3dec962b0770 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -13,7 +13,8 @@ #include <linux/errno.h> #include <asm/cacheflush.h> #include <asm/cp15.h> -#include <mach/common.h> + +#include "common.h" static inline void cpu_enter_lowpower(void) { diff --git a/arch/arm/plat-mxc/include/mach/iim.h b/arch/arm/mach-imx/iim.h index 315bffadafda..315bffadafda 100644 --- a/arch/arm/plat-mxc/include/mach/iim.h +++ b/arch/arm/mach-imx/iim.h diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index e80d5235dac0..ebfae96543c4 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -14,21 +14,22 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mx27.h> + +#include "common.h" +#include "mx27.h" static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL), OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL), OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL), OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL), + OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx21-i2c.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx21-i2c.1", NULL), OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL), OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL), OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL), OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "imx27-nand.0", NULL), { /* sentinel */ } }; diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index a68ba207b2b7..af476de2570e 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -14,8 +14,9 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mx31.h> + +#include "common.h" +#include "mx31.h" static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR, diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index f233b4bb2342..5ffa40c673f8 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -15,38 +15,13 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mx51.h> -/* - * Lookup table for attaching a specific name and platform_data pointer to - * devices as they get created by of_platform_populate(). Ideally this table - * would not exist, but the current clock implementation depends on some devices - * having a specific name. - */ -static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL), - OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL), - OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL), - OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL), - OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL), - OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), - OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL), - OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL), - OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), - { /* sentinel */ } -}; +#include "common.h" +#include "mx51.h" static void __init imx51_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - imx51_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void __init imx51_timer_init(void) diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h deleted file mode 100644 index df5f522da6b3..000000000000 --- a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __MACH_DMA_MX1_MX2_H__ -#define __MACH_DMA_MX1_MX2_H__ -/* - * Don't use this header in new code, it will go away when all users are - * converted to mach/dma-v1.h - */ - -#include <mach/dma-v1.h> - -#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */ diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 82bd4403b450..cabefbc5e7c1 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -22,8 +22,9 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/kernel.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> + +#include "hardware.h" +#include "iomux-mx3.h" /* * IOMUX register (base) addresses diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h index 6b1507cf378e..95f4681d85d7 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h +++ b/arch/arm/mach-imx/iomux-mx1.h @@ -18,7 +18,7 @@ #ifndef __MACH_IOMUX_MX1_H__ #define __MACH_IOMUX_MX1_H__ -#include <mach/iomux-v1.h> +#include "iomux-v1.h" #define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) #define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/mach-imx/iomux-mx21.h index 1495dfda7834..a70cffceb085 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h +++ b/arch/arm/mach-imx/iomux-mx21.h @@ -18,8 +18,8 @@ #ifndef __MACH_IOMUX_MX21_H__ #define __MACH_IOMUX_MX21_H__ -#include <mach/iomux-mx2x.h> -#include <mach/iomux-v1.h> +#include "iomux-mx2x.h" +#include "iomux-v1.h" /* Primary GPIO pin functions */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/mach-imx/iomux-mx25.h index c61ec0fc10d4..be51e838375c 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/mach-imx/iomux-mx25.h @@ -19,7 +19,7 @@ #ifndef __MACH_IOMUX_MX25_H__ #define __MACH_IOMUX_MX25_H__ -#include <mach/iomux-v3.h> +#include "iomux-v3.h" /* * IOMUX/PAD Bit field definitions diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/mach-imx/iomux-mx27.h index d9f9a6e32d80..218e99e89e86 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h +++ b/arch/arm/mach-imx/iomux-mx27.h @@ -19,8 +19,8 @@ #ifndef __MACH_IOMUX_MX27_H__ #define __MACH_IOMUX_MX27_H__ -#include <mach/iomux-mx2x.h> -#include <mach/iomux-v1.h> +#include "iomux-mx2x.h" +#include "iomux-v1.h" /* Primary GPIO pin functions */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/mach-imx/iomux-mx2x.h index 7a9b20abda09..7a9b20abda09 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h +++ b/arch/arm/mach-imx/iomux-mx2x.h diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h index f79f78a1c0ed..f79f78a1c0ed 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/mach-imx/iomux-mx3.h diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/mach-imx/iomux-mx35.h index 3117c18bbbd9..90bfa6b5be6a 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h +++ b/arch/arm/mach-imx/iomux-mx35.h @@ -19,7 +19,7 @@ #ifndef __MACH_IOMUX_MX35_H__ #define __MACH_IOMUX_MX35_H__ -#include <mach/iomux-v3.h> +#include "iomux-v3.h" /* * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/mach-imx/iomux-mx50.h index 98e7fd0b9083..00f56e0e8009 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx50.h +++ b/arch/arm/mach-imx/iomux-mx50.h @@ -19,7 +19,7 @@ #ifndef __MACH_IOMUX_MX50_H__ #define __MACH_IOMUX_MX50_H__ -#include <mach/iomux-v3.h> +#include "iomux-v3.h" #define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/mach-imx/iomux-mx51.h index 2623e7a2e190..75bbcc4aa2d2 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/mach-imx/iomux-mx51.h @@ -13,7 +13,7 @@ #ifndef __MACH_IOMUX_MX51_H__ #define __MACH_IOMUX_MX51_H__ -#include <mach/iomux-v3.h> +#include "iomux-v3.h" #define __NA_ 0x000 diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index 1f73963bc13e..2b156d1d9e21 100644 --- a/arch/arm/plat-mxc/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c @@ -28,9 +28,10 @@ #include <linux/string.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/iomux-v1.h> + +#include "hardware.h" +#include "iomux-v1.h" static void __iomem *imx_iomuxv1_baseaddr; static unsigned imx_iomuxv1_numports; diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/mach-imx/iomux-v1.h index 02651a40fe23..02651a40fe23 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/mach-imx/iomux-v1.h diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index 99a9cdb9d6be..9dae74bf47fc 100644 --- a/arch/arm/plat-mxc/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -25,9 +25,10 @@ #include <linux/string.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/iomux-v3.h> + +#include "hardware.h" +#include "iomux-v3.h" static void __iomem *base; diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h index 2fa3b5430102..2fa3b5430102 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/mach-imx/iomux-v3.h diff --git a/arch/arm/plat-mxc/include/mach/iram.h b/arch/arm/mach-imx/iram.h index 022690c33702..022690c33702 100644 --- a/arch/arm/plat-mxc/include/mach/iram.h +++ b/arch/arm/mach-imx/iram.h diff --git a/arch/arm/plat-mxc/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c index 074c3869626a..6c80424f678e 100644 --- a/arch/arm/plat-mxc/iram_alloc.c +++ b/arch/arm/mach-imx/iram_alloc.c @@ -22,7 +22,8 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/genalloc.h> -#include <mach/iram.h> + +#include "iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/mach-imx/irq-common.c index b6e11458e5ae..b6e11458e5ae 100644 --- a/arch/arm/plat-mxc/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/mach-imx/irq-common.h index 6ccb3a14c693..5b2dabba330f 100644 --- a/arch/arm/plat-mxc/irq-common.h +++ b/arch/arm/mach-imx/irq-common.h @@ -19,6 +19,9 @@ #ifndef __PLAT_MXC_IRQ_COMMON_H__ #define __PLAT_MXC_IRQ_COMMON_H__ +/* all normal IRQs can be FIQs */ +#define FIQ_START 0 + struct mxc_extra_irq { int (*set_priority)(unsigned char irq, unsigned char prio); diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c index c40a34c00489..5f1510363ee7 100644 --- a/arch/arm/mach-imx/lluart.c +++ b/arch/arm/mach-imx/lluart.c @@ -14,7 +14,8 @@ #include <asm/page.h> #include <asm/sizes.h> #include <asm/mach/map.h> -#include <mach/hardware.h> + +#include "hardware.h" static struct map_desc imx_lluart_desc = { #ifdef CONFIG_DEBUG_IMX6Q_UART2 diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 7b99a79722b6..5c9bd2c66e6d 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -25,11 +25,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx1.h> - +#include "common.h" #include "devices-imx1.h" +#include "hardware.h" +#include "iomux-mx1.h" static const int apf9328_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 5985ed1b8c98..59bd6b06a6b5 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -41,19 +41,18 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx31.h" #include "crmregs-imx3.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static int armadillo5x0_pins[] = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 9a9897749dd6..3a39d5aec07a 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -19,15 +19,14 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <mach/iomux-mx3.h> -#include <mach/hardware.h> -#include <mach/common.h> - #include <asm/mach/time.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 2bb9e18d9ee1..12a370646b45 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -34,13 +34,12 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/eukrea-baseboards.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx27.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" static const int eukrea_cpuimx27_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index d49b0ec6bdec..5a31bf8c8f4c 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -37,12 +37,11 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/eukrea-baseboards.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> - +#include "common.h" #include "devices-imx35.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx35.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index b87cc49ab1e8..b727de029c8f 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -26,18 +26,17 @@ #include <linux/spi/spi.h> #include <linux/can/platform/mcp251x.h> -#include <mach/eukrea-baseboards.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" #include "devices-imx51.h" #include "cpu_op-mx51.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx51.h" #define USBH1_RST IMX_GPIO_NR(2, 28) #define ETH_RST IMX_GPIO_NR(2, 31) diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 017bbb70ea41..75027a5ad8b7 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -27,18 +27,18 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <mach/eukrea-baseboards.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/mx25.h> -#include <mach/iomux-mx25.h> +#include "common.h" #include "devices-imx25.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx25.h" +#include "mx25.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 141756f00ae5..318bd8df7fcc 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -40,17 +40,21 @@ #include <asm/mach/time.h> #include <asm/system_info.h> #include <asm/memblock.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" #define TVP5150_RSTN (GPIO_PORTC + 18) #define TVP5150_PWDN (GPIO_PORTC + 19) #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) +#define VERSION_MASK 0x7 +#define MOTHERBOARD_SHIFT 4 +#define EXPBOARD_SHIFT 0 + #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) #define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) @@ -237,7 +241,7 @@ static struct mx2_camera_platform_data visstrim_camera = { static phys_addr_t mx2_camera_base __initdata; #define MX2_CAMERA_BUF_SIZE SZ_8M -static void __init visstrim_camera_init(void) +static void __init visstrim_analog_camera_init(void) { struct platform_device *pdev; int dma; @@ -474,6 +478,27 @@ static void __init visstrim_deinterlace_init(void) return; } +/* Emma-PrP for format conversion */ +static void __init visstrim_emmaprp_init(void) +{ + struct platform_device *pdev; + int dma; + + pdev = imx27_add_mx2_emmaprp(); + if (IS_ERR(pdev)) + return; + + /* + * Use the same memory area as the analog camera since both + * devices are, by nature, exclusive. + */ + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + pr_err("Failed to declare memory for emmaprp\n"); +} /* Audio */ static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { @@ -507,13 +532,14 @@ static void __init visstrim_m10_revision(void) mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); system_rev = 0x27000; - system_rev |= (mo_version << 4); - system_rev |= exp_version; + system_rev |= (mo_version << MOTHERBOARD_SHIFT); + system_rev |= (exp_version << EXPBOARD_SHIFT); } static void __init visstrim_m10_board_init(void) { int ret; + int mo_version; imx27_soc_init(); visstrim_m10_revision(); @@ -546,8 +572,24 @@ static void __init visstrim_m10_board_init(void) platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); - visstrim_deinterlace_init(); - visstrim_camera_init(); + + /* Use mother board version to decide what video devices we shall use */ + mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK; + if (mo_version & 0x1) { + visstrim_emmaprp_init(); + + /* + * Despite not being used, tvp5150 must be + * powered on to avoid I2C problems. To minimize + * power consupmtion keep reset enabled. + */ + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + } else { + visstrim_deinterlace_init(); + visstrim_analog_camera_init(); + } visstrim_coda_init(); } diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 7381387a8905..53a860112938 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -17,11 +17,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> +#include "hardware.h" +#include "common.h" #include "devices-imx27.h" +#include "iomux-mx27.h" static const int mx27ipcam_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 1f45b9189229..fc8dce931378 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -20,11 +20,11 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int mx27lite_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 29711e95579f..860284dea0e7 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -19,36 +19,9 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mx53.h> -/* - * Lookup table for attaching a specific name and platform_data pointer to - * devices as they get created by of_platform_populate(). Ideally this table - * would not exist, but the current clock implementation depends on some devices - * having a specific name. - */ -static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL), - OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL), - OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL), - OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), - { /* sentinel */ } -}; +#include "common.h" +#include "mx53.h" static void __init imx53_qsb_init(void) { @@ -68,8 +41,7 @@ static void __init imx53_dt_init(void) if (of_machine_is_compatible("fsl,imx53-qsb")) imx53_qsb_init(); - of_platform_populate(NULL, of_default_bus_match_table, - imx53_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void __init imx53_timer_init(void) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 47c91f7185d2..978b6dd00de4 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -33,10 +33,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/system_misc.h> -#include <mach/common.h> -#include <mach/cpuidle.h> -#include <mach/hardware.h> +#include "common.h" +#include "cpuidle.h" +#include "hardware.h" void imx6q_restart(char mode, const char *cmd) { diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 0330078ff788..2e536ea53444 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,11 +36,10 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> - +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" #define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \ IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \ diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 667f359a2e8b..06b483783e68 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -23,11 +23,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx1.h> - +#include "common.h" #include "devices-imx1.h" +#include "hardware.h" +#include "iomux-mx1.h" static const int mx1ads_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index ed22e3fe6ec8..6adb3136bb08 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -18,15 +18,15 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> #include <linux/gpio.h> -#include <mach/common.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/iomux-mx21.h> +#include "common.h" #include "devices-imx21.h" +#include "hardware.h" +#include "iomux-mx21.h" /* * Memory-mapped I/O on MX21ADS base board diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index ce247fd1269a..b1b03aa55bb8 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -31,17 +31,17 @@ #include <linux/platform_device.h> #include <linux/usb/otg.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/mx25.h> -#include <mach/iomux-mx25.h> +#include "common.h" #include "devices-imx25.h" +#include "hardware.h" +#include "iomux-mx25.h" +#include "mx25.h" #define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6) diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 05996f39005c..d0e547fa925f 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -36,13 +36,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> -#include <mach/ulpi.h> -#include <mach/3ds_debugboard.h> +#include "3ds_debugboard.h" +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" #define SD1_EN_GPIO IMX_GPIO_NR(2, 25) #define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 7dc59bac0e55..3d036f57f0e6 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -21,15 +21,15 @@ #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/irq.h> -#include <mach/common.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/iomux-mx27.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" /* * Base address of PBC controller, CS4 diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 8915f937b7d5..bc301befdd06 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -30,19 +30,19 @@ #include <media/soc_camera.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/3ds_debugboard.h> -#include <mach/ulpi.h> +#include "3ds_debugboard.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static int mx31_3ds_pins[] = { /* UART1 */ @@ -393,7 +393,7 @@ static struct regulator_init_data gpo_init = { }; static struct regulator_consumer_supply vmmc2_consumers[] = { - REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"), + REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"), }; static struct regulator_init_data vmmc2_init = { diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index e774b07f48d3..8b56f8883f32 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -28,8 +28,6 @@ #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 #include <linux/mfd/wm8350/audio.h> @@ -37,7 +35,10 @@ #include <linux/mfd/wm8350/pmic.h> #endif +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" /* Base address of PBC controller */ #define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 34b9bf075daf..08b9965c8b36 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -42,13 +42,12 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lilly.h> -#include <mach/ulpi.h> - +#include "board-mx31lilly.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" /* * This file contains module-specific initialization routines for LILLY-1131. diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ef57cff5abfb..bdcd92e59518 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -39,13 +39,12 @@ #include <asm/page.h> #include <asm/setup.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/board-mx31lite.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> - +#include "board-mx31lite.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" /* * This file contains the module-specific initialization routines. diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 459e754ef8c9..2517cfa9f26b 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -42,14 +42,14 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/board-mx31moboard.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> #include <linux/platform_data/asoc-imx-ssi.h> +#include "board-mx31moboard.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static unsigned int moboard_pins[] = { /* UART0 */ @@ -175,11 +175,11 @@ static const struct spi_imx_master moboard_spi1_pdata __initconst = { static struct regulator_consumer_supply sdhc_consumers[] = { { - .dev_name = "mxc-mmc.0", + .dev_name = "imx31-mmc.0", .supply = "sdhc0_vcc", }, { - .dev_name = "mxc-mmc.1", + .dev_name = "imx31-mmc.1", .supply = "sdhc1_vcc", }, }; diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 504983c68aa8..5277da45d60c 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -43,15 +43,15 @@ #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> -#include <mach/3ds_debugboard.h> #include <video/platform_lcd.h> #include <media/soc_camera.h> +#include "3ds_debugboard.h" +#include "common.h" #include "devices-imx35.h" +#include "hardware.h" +#include "iomux-mx35.h" #define GPIO_MC9S08DZ60_GPS_ENABLE 0 #define GPIO_MC9S08DZ60_HDD_ENABLE 4 diff --git a/arch/arm/mach-imx/mach-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c index 42b66e8d9615..0c1f88a80bdc 100644 --- a/arch/arm/mach-imx/mach-mx50_rdp.c +++ b/arch/arm/mach-imx/mach-mx50_rdp.c @@ -24,17 +24,16 @@ #include <linux/delay.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx50.h> - #include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" #include "devices-imx50.h" +#include "hardware.h" +#include "iomux-mx50.h" #define FEC_EN IMX_GPIO_NR(6, 23) #define FEC_RESET_B IMX_GPIO_NR(4, 12) diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 9ee84a4af639..abc25bd1107b 100644 --- a/arch/arm/mach-imx/mach-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c @@ -19,12 +19,11 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx51.h> -#include <mach/3ds_debugboard.h> - +#include "3ds_debugboard.h" +#include "common.h" #include "devices-imx51.h" +#include "hardware.h" +#include "iomux-mx51.h" #define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index 7b31cbde8775..d9a84ca2199a 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -20,17 +20,16 @@ #include <linux/spi/flash.h> #include <linux/spi/spi.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" #include "devices-imx51.h" #include "cpu_op-mx51.h" +#include "hardware.h" +#include "iomux-mx51.h" #define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) #define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27) diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 0bf6d30aa32d..f4a8c7e108e1 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -21,17 +21,17 @@ #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/irq.h> -#include <mach/common.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> #include <linux/gpio.h> -#include <mach/iomux-mx27.h> #include <linux/i2c/pca953x.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int mxt_td60_pins[] __initconst = { /* UART0 */ diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index de8516b7d69f..eee369fa94a2 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -32,13 +32,13 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> #include <asm/mach/time.h> -#include <mach/ulpi.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index e3c45130fb3c..547fef133f65 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -42,13 +42,13 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" #include "pcm037.h" +#include "ulpi.h" static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c index 11ffa81ad17d..8fd8255068ee 100644 --- a/arch/arm/mach-imx/mach-pcm037_eet.c +++ b/arch/arm/mach-imx/mach-pcm037_eet.c @@ -11,13 +11,12 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> - #include <asm/mach-types.h> #include "pcm037.h" +#include "common.h" #include "devices-imx31.h" +#include "iomux-mx3.h" static unsigned int pcm037_eet_pins[] = { /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 95f49d936fd3..4aa0d0798605 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -33,13 +33,12 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/board-pcm038.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> -#include <mach/ulpi.h> - +#include "board-pcm038.h" +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" static const int pcm038_pins[] __initconst = { /* UART1 */ @@ -212,7 +211,7 @@ static const struct spi_imx_master pcm038_spi0_data __initconst = { static struct regulator_consumer_supply sdhc1_consumers[] = { { - .dev_name = "mxc-mmc.1", + .dev_name = "imx21-mmc.1", .supply = "sdhc_vcc", }, }; diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index e4bd4387e344..92445440221e 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -33,12 +33,11 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx35.h" +#include "hardware.h" +#include "iomux-mx35.h" +#include "ulpi.h" static const struct fb_videomode fb_modedb[] = { { diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index fb25fbd31226..96d9a91f8a3b 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -21,17 +21,17 @@ #include <linux/mtd/nand.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/common.h> #include <asm/page.h> #include <asm/setup.h> -#include <mach/iomux-mx3.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" /* FPGA defines */ #define QONG_FPGA_VERSION(major, minor, rev) \ diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index 67ff38e9a3ca..fc970409dbaf 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -20,11 +20,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx1.h> - +#include "common.h" #include "devices-imx1.h" +#include "hardware.h" +#include "iomux-mx1.h" /* * This scb9328 has a 32MiB flash diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 39eb7960e2a4..3aecf91e4289 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -28,15 +28,14 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> - #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/mfd/mc13xxx.h> +#include "common.h" #include "devices-imx35.h" +#include "hardware.h" +#include "iomux-mx35.h" #define GPIO_LCDPWR IMX_GPIO_NR(1, 2) #define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 6d60d51868bc..7a146671e65a 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -22,9 +22,10 @@ #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-v1.h> +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v1.h" static struct map_desc imx_io_desc[] __initdata = { imx_map_entry(MX1, IO, MT_DEVICE), @@ -58,5 +59,7 @@ void __init imx1_soc_init(void) MX1_GPIO_INT_PORTC, 0); mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, MX1_GPIO_INT_PORTD, 0); + imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR, + MX1_DMA_INT, MX1_DMA_ERR); pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index d056dad0940d..d8ccd3a8ec53 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -21,12 +21,13 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/pinctrl/machine.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/iomux-v1.h> + +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v1.h" /* MX21 memory map definition */ static struct map_desc imx21_io_desc[] __initdata = { @@ -81,6 +82,8 @@ static const struct resource imx21_audmux_res[] __initconst = { void __init imx21_soc_init(void) { + mxc_device_init(); + mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); @@ -89,7 +92,8 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); pinctrl_provide_dummies(); - imx_add_imx_dma(); + imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, + MX21_INT_DMACH0, 0); /* No ERR irq */ platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, ARRAY_SIZE(imx21_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index f3f5c6542ab4..9357707bb7af 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -24,11 +24,11 @@ #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/hardware.h> -#include <mach/mx25.h> -#include <mach/iomux-v3.h> +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v3.h" +#include "mx25.h" /* * This table defines static virtual address mappings for I/O regions. @@ -89,6 +89,8 @@ static const struct resource imx25_audmux_res[] __initconst = { void __init imx25_soc_init(void) { + mxc_device_init(); + /* i.mx25 has the i.mx35 type gpio */ mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index e7e24afc45ed..4f1be65a7b5f 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -21,12 +21,13 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/pinctrl/machine.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/iomux-v1.h> + +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v1.h" /* MX27 memory map definition */ static struct map_desc imx27_io_desc[] __initdata = { @@ -81,6 +82,8 @@ static const struct resource imx27_audmux_res[] __initconst = { void __init imx27_soc_init(void) { + mxc_device_init(); + /* i.mx27 has the i.mx21 type gpio */ mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); @@ -90,7 +93,8 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); pinctrl_provide_dummies(); - imx_add_imx_dma(); + imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, + MX27_INT_DMACH0, 0); /* No ERR irq */ /* imx27 has the imx21 type audmux */ platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, ARRAY_SIZE(imx27_audmux_res)); diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index b5deb0554552..cefa047c4053 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -26,12 +26,11 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/hardware.h> -#include <mach/iomux-v3.h> - +#include "common.h" #include "crmregs-imx3.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v3.h" void __iomem *mx3_ccm_base; @@ -175,6 +174,8 @@ void __init imx31_soc_init(void) imx3_init_l2x0(); + mxc_device_init(); + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); @@ -271,6 +272,8 @@ void __init imx35_soc_init(void) imx3_init_l2x0(); + mxc_device_init(); + mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index acb0aadb4255..79d71cf23a1d 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/iomux-v3.h> +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v3.h" /* * Define the MX50 memory map. @@ -81,8 +81,28 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } +/* + * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by + * the Freescale marketing division. However this did not remove the + * hardware from the chip which still needs to be configured for proper + * IPU support. + */ +static void __init imx51_ipu_mipi_setup(void) +{ + void __iomem *hsc_addr; + hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR); + + /* setup MIPI module to legacy mode */ + __raw_writel(0xf00, hsc_addr); + + /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ + __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff, + hsc_addr + 0x800); +} + void __init imx51_init_early(void) { + imx51_ipu_mipi_setup(); mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); @@ -138,6 +158,8 @@ static const struct resource imx51_audmux_res[] __initconst = { void __init imx50_soc_init(void) { + mxc_device_init(); + /* i.mx50 has the i.mx35 type gpio */ mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); @@ -153,6 +175,8 @@ void __init imx50_soc_init(void) void __init imx51_soc_init(void) { + mxc_device_init(); + /* i.mx51 has the i.mx35 type gpio */ mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/mach-imx/mx1.h index 45bd31cc34d6..45bd31cc34d6 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/mach-imx/mx1.h diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/mach-imx/mx21.h index 468738aa997f..468738aa997f 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/mach-imx/mx21.h diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/mach-imx/mx25.h index ec466400a200..ec466400a200 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/mach-imx/mx25.h diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/mach-imx/mx27.h index e074616d54ca..e074616d54ca 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/mach-imx/mx27.h diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/mach-imx/mx2x.h index 11642f5b224c..11642f5b224c 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/mach-imx/mx2x.h diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/mach-imx/mx31.h index ee9b1f9215df..ee9b1f9215df 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/mach-imx/mx31.h diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index 29e890f92055..d4361b80c5fb 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -30,12 +30,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lilly.h> - +#include "board-mx31lilly.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" /* * This file contains board-specific initialization routines for the diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index 83d17d9e0bc8..5a160b7e4fce 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -31,12 +31,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lite.h> - +#include "board-mx31lite.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" /* * This file contains board-specific initialization routines for the diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c index cc285e507286..52d5b1574721 100644 --- a/arch/arm/mach-imx/mx31moboard-devboard.c +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -22,12 +22,11 @@ #include <linux/usb/otg.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/hardware.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static unsigned int devboard_pins[] = { /* UART1 */ diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index 135c90e3a45f..a4f43e90f3c1 100644 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -24,14 +24,13 @@ #include <linux/usb/otg.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> - #include <media/soc_camera.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static unsigned int marxbot_pins[] = { /* SDHC2 */ diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c index fabb801e7994..04ae45dbfaa7 100644 --- a/arch/arm/mach-imx/mx31moboard-smartbot.c +++ b/arch/arm/mach-imx/mx31moboard-smartbot.c @@ -23,15 +23,14 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31moboard.h> -#include <mach/ulpi.h> - #include <media/soc_camera.h> +#include "board-mx31moboard.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static unsigned int smartbot_pins[] = { /* UART1 */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/mach-imx/mx35.h index 2af5d3a699c7..2af5d3a699c7 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/mach-imx/mx35.h diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/mach-imx/mx3x.h index 96fb4fbc8ad7..96fb4fbc8ad7 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/mach-imx/mx3x.h diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/mach-imx/mx50.h index 09ac19c1570c..09ac19c1570c 100644 --- a/arch/arm/plat-mxc/include/mach/mx50.h +++ b/arch/arm/mach-imx/mx50.h diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/mach-imx/mx51.h index af844f76261a..af844f76261a 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/mach-imx/mx51.h diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/mach-imx/mx53.h index f829d1c22501..f829d1c22501 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/mach-imx/mx53.h diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/mach-imx/mx6q.h index f7e7dbac8f4b..f7e7dbac8f4b 100644 --- a/arch/arm/plat-mxc/include/mach/mx6q.h +++ b/arch/arm/mach-imx/mx6q.h diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/mach-imx/mxc.h index d78298366a91..d78298366a91 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/mach-imx/mxc.h diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index 9917e2ff51da..51c608234089 100644 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c @@ -23,11 +23,10 @@ #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> -#include <mach/hardware.h> - +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int pcm970_pins[] __initconst = { /* SDHC */ diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 2ac43e1a2dfd..3777b805b76b 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -16,8 +16,9 @@ #include <asm/smp_scu.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/hardware.h> + +#include "common.h" +#include "hardware.h" static void __iomem *scu_base; diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 6fcffa7db978..56d02d064fbf 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -10,7 +10,8 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/hardware.h> + +#include "hardware.h" static int mx27_suspend_enter(suspend_state_t state) { diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c index 822103bdb709..6a07006ff0f4 100644 --- a/arch/arm/mach-imx/pm-imx3.c +++ b/arch/arm/mach-imx/pm-imx3.c @@ -9,10 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ #include <linux/io.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "common.h" #include "crmregs-imx3.h" +#include "devices/devices-common.h" +#include "hardware.h" /* * Set cpu low power mode before WFI instruction. This function is called diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 19621ed1ffa5..2e063c2deb9e 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -16,10 +16,11 @@ #include <asm/cacheflush.h> #include <asm/system_misc.h> #include <asm/tlbflush.h> -#include <mach/common.h> -#include <mach/cpuidle.h> -#include <mach/hardware.h> + +#include "common.h" +#include "cpuidle.h" #include "crm-regs-imx5.h" +#include "hardware.h" /* * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit. diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index f7b0c2b1b905..a17543da602d 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -18,8 +18,9 @@ #include <asm/proc-fns.h> #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/common.h> -#include <mach/hardware.h> + +#include "common.h" +#include "hardware.h" extern unsigned long phys_l2x0_saved_regs; diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c index 792090f9a032..792090f9a032 100644 --- a/arch/arm/plat-mxc/ssi-fiq-ksym.c +++ b/arch/arm/mach-imx/ssi-fiq-ksym.c diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S index a8b93c5f29b5..a8b93c5f29b5 100644 --- a/arch/arm/plat-mxc/ssi-fiq.S +++ b/arch/arm/mach-imx/ssi-fiq.S diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/mach-imx/system.c index 3da78cfc5a94..695e0d73bf85 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/mach-imx/system.c @@ -22,12 +22,13 @@ #include <linux/err.h> #include <linux/delay.h> -#include <mach/hardware.h> -#include <mach/common.h> #include <asm/system_misc.h> #include <asm/proc-fns.h> #include <asm/mach-types.h> +#include "common.h" +#include "hardware.h" + static void __iomem *wdog_base; /* diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/mach-imx/time.c index a17abcf98325..f017302f6d09 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/mach-imx/time.c @@ -27,10 +27,11 @@ #include <linux/clk.h> #include <linux/err.h> -#include <mach/hardware.h> #include <asm/sched_clock.h> #include <asm/mach/time.h> -#include <mach/common.h> + +#include "common.h" +#include "hardware.h" /* * There are 2 versions of the timer hardware on Freescale MXC hardware. diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/mach-imx/tzic.c index 3ed1adbc09f8..9721161f208f 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -21,10 +21,8 @@ #include <asm/mach/irq.h> #include <asm/exception.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/irqs.h> - +#include "common.h" +#include "hardware.h" #include "irq-common.h" /* diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/mach-imx/ulpi.c index d2963427184f..0f051957d10c 100644 --- a/arch/arm/plat-mxc/ulpi.c +++ b/arch/arm/mach-imx/ulpi.c @@ -24,7 +24,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <mach/ulpi.h> +#include "ulpi.h" /* ULPIVIEW register bits */ #define ULPIVW_WU (1 << 31) /* Wakeup */ diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/mach-imx/ulpi.h index 42bdaca6d7d9..42bdaca6d7d9 100644 --- a/arch/arm/plat-mxc/include/mach/ulpi.h +++ b/arch/arm/mach-imx/ulpi.h diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 350e26636a06..abeff25532ab 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -8,6 +8,7 @@ config ARCH_INTEGRATOR_AP select MIGHT_HAVE_PCI select SERIAL_AMBA_PL010 select SERIAL_AMBA_PL010_CONSOLE + select SOC_BUS help Include support for the ARM(R) Integrator/AP and Integrator/PP2 platforms. @@ -19,6 +20,7 @@ config ARCH_INTEGRATOR_CP select PLAT_VERSATILE_CLCD select SERIAL_AMBA_PL011 select SERIAL_AMBA_PL011_CONSOLE + select SOC_BUS help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index c3ff21b5ea24..79197d8b34aa 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,6 +1,12 @@ #include <linux/amba/serial.h> -extern struct amba_pl010_data integrator_uart_data; +#ifdef CONFIG_ARCH_INTEGRATOR_AP +extern struct amba_pl010_data ap_uart_data; +#else +/* Not used without Integrator/AP support anyway */ +struct amba_pl010_data ap_uart_data {}; +#endif void integrator_init_early(void); int integrator_init(bool is_cp); void integrator_reserve(void); void integrator_restart(char, const char *); +void integrator_init_sysfs(struct device *parent, u32 id); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ea22a17246d7..39c060f75e47 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -18,10 +18,10 @@ #include <linux/memblock.h> #include <linux/sched.h> #include <linux/smp.h> -#include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/io.h> +#include <linux/stat.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -46,10 +46,10 @@ static AMBA_APB_DEVICE(rtc, "rtc", 0, INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); static AMBA_APB_DEVICE(uart0, "uart0", 0, - INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); + INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL); static AMBA_APB_DEVICE(uart1, "uart1", 0, - INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); + INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL); static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); @@ -77,6 +77,8 @@ int __init integrator_init(bool is_cp) uart1_device.periphid = 0x00041010; kmi0_device.periphid = 0x00041050; kmi1_device.periphid = 0x00041050; + uart0_device.dev.platform_data = &ap_uart_data; + uart1_device.dev.platform_data = &ap_uart_data; } for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { @@ -89,49 +91,6 @@ int __init integrator_init(bool is_cp) #endif -/* - * On the Integrator platform, the port RTS and DTR are provided by - * bits in the following SC_CTRLS register bits: - * RTS DTR - * UART0 7 6 - * UART1 5 4 - */ -#define SC_CTRLC __io_address(INTEGRATOR_SC_CTRLC) -#define SC_CTRLS __io_address(INTEGRATOR_SC_CTRLS) - -static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) -{ - unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; - u32 phybase = dev->res.start; - - if (phybase == INTEGRATOR_UART0_BASE) { - /* UART0 */ - rts_mask = 1 << 4; - dtr_mask = 1 << 5; - } else { - /* UART1 */ - rts_mask = 1 << 6; - dtr_mask = 1 << 7; - } - - if (mctrl & TIOCM_RTS) - ctrlc |= rts_mask; - else - ctrls |= rts_mask; - - if (mctrl & TIOCM_DTR) - ctrlc |= dtr_mask; - else - ctrls |= dtr_mask; - - __raw_writel(ctrls, SC_CTRLS); - __raw_writel(ctrlc, SC_CTRLC); -} - -struct amba_pl010_data integrator_uart_data = { - .set_mctrl = integrator_uart_set_mctrl, -}; - static DEFINE_RAW_SPINLOCK(cm_lock); /** @@ -169,3 +128,93 @@ void integrator_restart(char mode, const char *cmd) { cm_control(CM_CTRL_RESET, CM_CTRL_RESET); } + +static u32 integrator_id; + +static ssize_t intcp_get_manf(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%02x\n", integrator_id >> 24); +} + +static struct device_attribute intcp_manf_attr = + __ATTR(manufacturer, S_IRUGO, intcp_get_manf, NULL); + +static ssize_t intcp_get_arch(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + const char *arch; + + switch ((integrator_id >> 16) & 0xff) { + case 0x00: + arch = "ASB little-endian"; + break; + case 0x01: + arch = "AHB little-endian"; + break; + case 0x03: + arch = "AHB-Lite system bus, bi-endian"; + break; + case 0x04: + arch = "AHB"; + break; + default: + arch = "Unknown"; + break; + } + + return sprintf(buf, "%s\n", arch); +} + +static struct device_attribute intcp_arch_attr = + __ATTR(architecture, S_IRUGO, intcp_get_arch, NULL); + +static ssize_t intcp_get_fpga(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + const char *fpga; + + switch ((integrator_id >> 12) & 0xf) { + case 0x01: + fpga = "XC4062"; + break; + case 0x02: + fpga = "XC4085"; + break; + case 0x04: + fpga = "EPM7256AE (Altera PLD)"; + break; + default: + fpga = "Unknown"; + break; + } + + return sprintf(buf, "%s\n", fpga); +} + +static struct device_attribute intcp_fpga_attr = + __ATTR(fpga, S_IRUGO, intcp_get_fpga, NULL); + +static ssize_t intcp_get_build(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%02x\n", (integrator_id >> 4) & 0xFF); +} + +static struct device_attribute intcp_build_attr = + __ATTR(build, S_IRUGO, intcp_get_build, NULL); + + + +void integrator_init_sysfs(struct device *parent, u32 id) +{ + integrator_id = id; + device_create_file(parent, &intcp_manf_attr); + device_create_file(parent, &intcp_arch_attr); + device_create_file(parent, &intcp_fpga_attr); + device_create_file(parent, &intcp_build_attr); +} diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index e428f3ab15c7..9f82f9dcbb98 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,10 +21,9 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/io.h> +#include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> -#include <linux/clkdev.h> -#include <asm/hardware/icst.h> #include <mach/lm.h> #include <mach/impd1.h> #include <asm/sizes.h> @@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position"); struct impd1_module { void __iomem *base; - struct clk vcos[2]; - struct clk_lookup *clks[3]; -}; - -static const struct icst_params impd1_vco_params = { - .ref = 24000000, /* 24 MHz */ - .vco_max = ICST525_VCO_MAX_3V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 12, - .vd_max = 519, - .rd_min = 3, - .rd_max = 120, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static void impd1_setvco(struct clk *clk, struct icst_vco vco) -{ - struct impd1_module *impd1 = clk->data; - u32 val = vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, impd1->base + IMPD1_LOCK); - writel(val, clk->vcoreg); - writel(0, impd1->base + IMPD1_LOCK); - -#ifdef DEBUG - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 7; - - pr_debug("IM-PD1: VCO%d clock is %ld Hz\n", - vconr, icst525_hz(&impd1_vco_params, vco)); -#endif -} - -static const struct clk_ops impd1_clk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = impd1_setvco, }; void impd1_tweak_control(struct device *dev, u32 mask, u32 val) @@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = { } }; -static struct clk fixed_14745600 = { - .rate = 14745600, -}; - static int impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; @@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev) printk("IM-PD1 found at 0x%08lx\n", (unsigned long)dev->resource.start); - for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { - impd1->vcos[i].ops = &impd1_clk_ops, - impd1->vcos[i].owner = THIS_MODULE, - impd1->vcos[i].params = &impd1_vco_params, - impd1->vcos[i].data = impd1; - } - impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1; - impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2; - - impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000", - dev->id); - impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100", - dev->id); - impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200", - dev->id); - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_add(impd1->clks[i]); + integrator_impd1_clk_init(impd1->base, dev->id); for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { struct impd1_device *idev = impd1_devs + i; @@ -402,9 +342,10 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); - d = amba_ahb_device_add(&dev->dev, devname, pc_base, SZ_4K, - dev->irq, dev->irq, - idev->platform_data, idev->id); + d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, + dev->irq, dev->irq, + idev->platform_data, idev->id, + &dev->resource); if (IS_ERR(d)) { dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d)); continue; @@ -431,12 +372,9 @@ static int impd1_remove_one(struct device *dev, void *data) static void impd1_remove(struct lm_device *dev) { struct impd1_module *impd1 = lm_get_drvdata(dev); - int i; device_for_each_child(&dev->dev, NULL, impd1_remove_one); - - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_drop(impd1->clks[i]); + integrator_impd1_clk_exit(dev->id); lm_set_drvdata(dev, NULL); diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h index 7371018455d2..eff0adad9ae3 100644 --- a/arch/arm/mach-integrator/include/mach/irqs.h +++ b/arch/arm/mach-integrator/include/mach/irqs.h @@ -19,64 +19,63 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* - * Interrupt numbers +/* + * Interrupt numbers, all of the above are just static reservations + * used so they can be encoded into device resources. They will finally + * be done away with when switching to device tree. */ -#define IRQ_PIC_START 1 -#define IRQ_SOFTINT 1 -#define IRQ_UARTINT0 2 -#define IRQ_UARTINT1 3 -#define IRQ_KMIINT0 4 -#define IRQ_KMIINT1 5 -#define IRQ_TIMERINT0 6 -#define IRQ_TIMERINT1 7 -#define IRQ_TIMERINT2 8 -#define IRQ_RTCINT 9 -#define IRQ_AP_EXPINT0 10 -#define IRQ_AP_EXPINT1 11 -#define IRQ_AP_EXPINT2 12 -#define IRQ_AP_EXPINT3 13 -#define IRQ_AP_PCIINT0 14 -#define IRQ_AP_PCIINT1 15 -#define IRQ_AP_PCIINT2 16 -#define IRQ_AP_PCIINT3 17 -#define IRQ_AP_V3INT 18 -#define IRQ_AP_CPINT0 19 -#define IRQ_AP_CPINT1 20 -#define IRQ_AP_LBUSTIMEOUT 21 -#define IRQ_AP_APCINT 22 -#define IRQ_CP_CLCDCINT 23 -#define IRQ_CP_MMCIINT0 24 -#define IRQ_CP_MMCIINT1 25 -#define IRQ_CP_AACIINT 26 -#define IRQ_CP_CPPLDINT 27 -#define IRQ_CP_ETHINT 28 -#define IRQ_CP_TSPENINT 29 -#define IRQ_PIC_END 29 +#define IRQ_PIC_START 64 +#define IRQ_SOFTINT (IRQ_PIC_START+0) +#define IRQ_UARTINT0 (IRQ_PIC_START+1) +#define IRQ_UARTINT1 (IRQ_PIC_START+2) +#define IRQ_KMIINT0 (IRQ_PIC_START+3) +#define IRQ_KMIINT1 (IRQ_PIC_START+4) +#define IRQ_TIMERINT0 (IRQ_PIC_START+5) +#define IRQ_TIMERINT1 (IRQ_PIC_START+6) +#define IRQ_TIMERINT2 (IRQ_PIC_START+7) +#define IRQ_RTCINT (IRQ_PIC_START+8) +#define IRQ_AP_EXPINT0 (IRQ_PIC_START+9) +#define IRQ_AP_EXPINT1 (IRQ_PIC_START+10) +#define IRQ_AP_EXPINT2 (IRQ_PIC_START+11) +#define IRQ_AP_EXPINT3 (IRQ_PIC_START+12) +#define IRQ_AP_PCIINT0 (IRQ_PIC_START+13) +#define IRQ_AP_PCIINT1 (IRQ_PIC_START+14) +#define IRQ_AP_PCIINT2 (IRQ_PIC_START+15) +#define IRQ_AP_PCIINT3 (IRQ_PIC_START+16) +#define IRQ_AP_V3INT (IRQ_PIC_START+17) +#define IRQ_AP_CPINT0 (IRQ_PIC_START+18) +#define IRQ_AP_CPINT1 (IRQ_PIC_START+19) +#define IRQ_AP_LBUSTIMEOUT (IRQ_PIC_START+20) +#define IRQ_AP_APCINT (IRQ_PIC_START+21) +#define IRQ_CP_CLCDCINT (IRQ_PIC_START+22) +#define IRQ_CP_MMCIINT0 (IRQ_PIC_START+23) +#define IRQ_CP_MMCIINT1 (IRQ_PIC_START+24) +#define IRQ_CP_AACIINT (IRQ_PIC_START+25) +#define IRQ_CP_CPPLDINT (IRQ_PIC_START+26) +#define IRQ_CP_ETHINT (IRQ_PIC_START+27) +#define IRQ_CP_TSPENINT (IRQ_PIC_START+28) +#define IRQ_PIC_END (IRQ_PIC_START+28) -#define IRQ_CIC_START 32 -#define IRQ_CM_SOFTINT 32 -#define IRQ_CM_COMMRX 33 -#define IRQ_CM_COMMTX 34 -#define IRQ_CIC_END 34 +#define IRQ_CIC_START (IRQ_PIC_END+1) +#define IRQ_CM_SOFTINT (IRQ_CIC_START+0) +#define IRQ_CM_COMMRX (IRQ_CIC_START+1) +#define IRQ_CM_COMMTX (IRQ_CIC_START+2) +#define IRQ_CIC_END (IRQ_CIC_START+2) /* * IntegratorCP only */ -#define IRQ_SIC_START 35 -#define IRQ_SIC_CP_SOFTINT 35 -#define IRQ_SIC_CP_RI0 36 -#define IRQ_SIC_CP_RI1 37 -#define IRQ_SIC_CP_CARDIN 38 -#define IRQ_SIC_CP_LMINT0 39 -#define IRQ_SIC_CP_LMINT1 40 -#define IRQ_SIC_CP_LMINT2 41 -#define IRQ_SIC_CP_LMINT3 42 -#define IRQ_SIC_CP_LMINT4 43 -#define IRQ_SIC_CP_LMINT5 44 -#define IRQ_SIC_CP_LMINT6 45 -#define IRQ_SIC_CP_LMINT7 46 -#define IRQ_SIC_END 46 - -#define NR_IRQS_INTEGRATOR_AP 34 -#define NR_IRQS_INTEGRATOR_CP 47 +#define IRQ_SIC_START (IRQ_CIC_END+1) +#define IRQ_SIC_CP_SOFTINT (IRQ_SIC_START+0) +#define IRQ_SIC_CP_RI0 (IRQ_SIC_START+1) +#define IRQ_SIC_CP_RI1 (IRQ_SIC_START+2) +#define IRQ_SIC_CP_CARDIN (IRQ_SIC_START+3) +#define IRQ_SIC_CP_LMINT0 (IRQ_SIC_START+4) +#define IRQ_SIC_CP_LMINT1 (IRQ_SIC_START+5) +#define IRQ_SIC_CP_LMINT2 (IRQ_SIC_START+6) +#define IRQ_SIC_CP_LMINT3 (IRQ_SIC_START+7) +#define IRQ_SIC_CP_LMINT4 (IRQ_SIC_START+8) +#define IRQ_SIC_CP_LMINT5 (IRQ_SIC_START+9) +#define IRQ_SIC_CP_LMINT6 (IRQ_SIC_START+10) +#define IRQ_SIC_CP_LMINT7 (IRQ_SIC_START+11) +#define IRQ_SIC_END (IRQ_SIC_START+11) diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index efeac5d0bc9e..be5859efe10e 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -190,7 +190,6 @@ #define INTEGRATOR_SC_CTRLC_OFFSET 0x0C #define INTEGRATOR_SC_DEC_OFFSET 0x10 #define INTEGRATOR_SC_ARB_OFFSET 0x14 -#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 #define INTEGRATOR_SC_LOCK_OFFSET 0x1C #define INTEGRATOR_SC_BASE 0x11000000 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index e6617c134faf..11e2a4145807 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -31,12 +31,16 @@ #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/irqchip/versatile-fpga.h> #include <linux/mtd/physmap.h> #include <linux/clk.h> #include <linux/platform_data/clk-integrator.h> #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/stat.h> +#include <linux/sys_soc.h> +#include <linux/termios.h> #include <video/vga.h> #include <mach/hardware.h> @@ -56,11 +60,12 @@ #include <asm/mach/pci.h> #include <asm/mach/time.h> -#include <plat/fpga-irq.h> - #include "common.h" -/* +/* Base address to the AP system controller */ +void __iomem *ap_syscon_base; + +/* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx * is the (PA >> 12). * @@ -68,7 +73,6 @@ * just for now). */ #define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) -#define VA_SC_BASE __io_address(INTEGRATOR_SC_BASE) #define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) #define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) @@ -97,11 +101,6 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), .length = SZ_4K, @@ -122,11 +121,6 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), .length = SZ_4K, @@ -201,8 +195,6 @@ device_initcall(irq_syscore_init); /* * Flash handling. */ -#define SC_CTRLC (VA_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET) -#define SC_CTRLS (VA_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET) #define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) #define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) @@ -210,7 +202,8 @@ static int ap_flash_init(struct platform_device *dev) { u32 tmp; - writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC); + writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE; writel(tmp, EBI_CSR1); @@ -227,7 +220,8 @@ static void ap_flash_exit(struct platform_device *dev) { u32 tmp; - writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC); + writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE; writel(tmp, EBI_CSR1); @@ -241,9 +235,12 @@ static void ap_flash_exit(struct platform_device *dev) static void ap_flash_set_vpp(struct platform_device *pdev, int on) { - void __iomem *reg = on ? SC_CTRLS : SC_CTRLC; - - writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg); + if (on) + writel(INTEGRATOR_SC_CTRL_nFLVPPEN, + ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); + else + writel(INTEGRATOR_SC_CTRL_nFLVPPEN, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); } static struct physmap_flash_data ap_flash_data = { @@ -254,6 +251,45 @@ static struct physmap_flash_data ap_flash_data = { }; /* + * For the PL010 found in the Integrator/AP some of the UART control is + * implemented in the system controller and accessed using a callback + * from the driver. + */ +static void integrator_uart_set_mctrl(struct amba_device *dev, + void __iomem *base, unsigned int mctrl) +{ + unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + u32 phybase = dev->res.start; + + if (phybase == INTEGRATOR_UART0_BASE) { + /* UART0 */ + rts_mask = 1 << 4; + dtr_mask = 1 << 5; + } else { + /* UART1 */ + rts_mask = 1 << 6; + dtr_mask = 1 << 7; + } + + if (mctrl & TIOCM_RTS) + ctrlc |= rts_mask; + else + ctrls |= rts_mask; + + if (mctrl & TIOCM_DTR) + ctrlc |= dtr_mask; + else + ctrls |= dtr_mask; + + __raw_writel(ctrls, ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); + __raw_writel(ctrlc, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); +} + +struct amba_pl010_data ap_uart_data = { + .set_mctrl = integrator_uart_set_mctrl, +}; + +/* * Where is the timer (VA)? */ #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) @@ -450,9 +486,9 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, "rtc", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, - "uart0", &integrator_uart_data), + "uart0", &ap_uart_data), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, - "uart1", &integrator_uart_data), + "uart1", &ap_uart_data), OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, "kmi0", NULL), OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, @@ -465,12 +501,60 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { static void __init ap_init_of(void) { unsigned long sc_dec; + struct device_node *root; + struct device_node *syscon; + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + u32 ap_sc_id; + int err; int i; - of_platform_populate(NULL, of_default_bus_match_table, - ap_auxdata_lookup, NULL); + /* Here we create an SoC device for the root node */ + root = of_find_node_by_path("/"); + if (!root) + return; + syscon = of_find_node_by_path("/syscon"); + if (!syscon) + return; + + ap_syscon_base = of_iomap(syscon, 0); + if (!ap_syscon_base) + return; + + ap_sc_id = readl(ap_syscon_base); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + err = of_property_read_string(root, "compatible", + &soc_dev_attr->soc_id); + if (err) + return; + err = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (err) + return; + soc_dev_attr->family = "Integrator"; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", + 'A' + (ap_sc_id & 0x0f)); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + + if (!IS_ERR_OR_NULL(parent)) + integrator_init_sysfs(parent, ap_sc_id); - sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); + of_platform_populate(root, of_default_bus_match_table, + ap_auxdata_lookup, parent); + + sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; @@ -499,7 +583,6 @@ static const char * ap_dt_board_compat[] = { DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .reserve = integrator_reserve, .map_io = ap_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_AP, .init_early = ap_init_early, .init_irq = ap_init_irq_of, .handle_irq = fpga_handle_irq, @@ -514,6 +597,27 @@ MACHINE_END #ifdef CONFIG_ATAGS /* + * For the ATAG boot some static mappings are needed. This will + * go away with the ATAG support down the road. + */ + +static struct map_desc ap_io_desc_atag[] __initdata = { + { + .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, +}; + +static void __init ap_map_io_atag(void) +{ + iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag)); + ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); + ap_map_io(); +} + +/* * This is where non-devicetree initialization code is collected and stashed * for eventual deletion. */ @@ -581,7 +685,7 @@ static void __init ap_init(void) platform_device_register(&cfi_flash_device); - sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); + sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; @@ -608,8 +712,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, .reserve = integrator_reserve, - .map_io = ap_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_AP, + .map_io = ap_map_io_atag, .init_early = ap_init_early, .init_irq = ap_init_irq, .handle_irq = fpga_handle_irq, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 5b08e8e4cc83..7322838c0447 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -20,12 +20,14 @@ #include <linux/amba/clcd.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/irqchip/versatile-fpga.h> #include <linux/gfp.h> #include <linux/mtd/physmap.h> #include <linux/platform_data/clk-integrator.h> #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/sys_soc.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -46,16 +48,17 @@ #include <asm/hardware/timer-sp.h> #include <plat/clcd.h> -#include <plat/fpga-irq.h> #include <plat/sched_clock.h> #include "common.h" +/* Base address to the CP controller */ +static void __iomem *intcp_con_base; + #define INTCP_PA_FLASH_BASE 0x24000000 #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CTRL_BASE __io_address(INTEGRATOR_CP_CTL_BASE) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1) @@ -82,11 +85,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), .length = SZ_4K, @@ -107,11 +105,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), .length = SZ_4K, @@ -126,11 +119,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE), .length = SZ_4K, .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE } }; @@ -146,9 +134,9 @@ static int intcp_flash_init(struct platform_device *dev) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); val |= CINTEGRATOR_FLASHPROG_FLWREN; - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); return 0; } @@ -157,21 +145,21 @@ static void intcp_flash_exit(struct platform_device *dev) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN); - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); } static void intcp_flash_set_vpp(struct platform_device *pdev, int on) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); if (on) val |= CINTEGRATOR_FLASHPROG_FLVPPEN; else val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN; - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); } static struct physmap_flash_data intcp_flash_data = { @@ -190,7 +178,7 @@ static struct physmap_flash_data intcp_flash_data = { static unsigned int mmc_status(struct device *dev) { unsigned int status = readl(__io_address(0xca000000 + 4)); - writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8)); + writel(8, intcp_con_base + 8); return status & 8; } @@ -318,9 +306,9 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, "rtc", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, - "uart0", &integrator_uart_data), + "uart0", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, - "uart1", &integrator_uart_data), + "uart1", NULL), OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, "kmi0", NULL), OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, @@ -338,8 +326,57 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { static void __init intcp_init_of(void) { - of_platform_populate(NULL, of_default_bus_match_table, - intcp_auxdata_lookup, NULL); + struct device_node *root; + struct device_node *cpcon; + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + u32 intcp_sc_id; + int err; + + /* Here we create an SoC device for the root node */ + root = of_find_node_by_path("/"); + if (!root) + return; + cpcon = of_find_node_by_path("/cpcon"); + if (!cpcon) + return; + + intcp_con_base = of_iomap(cpcon, 0); + if (!intcp_con_base) + return; + + intcp_sc_id = readl(intcp_con_base); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + err = of_property_read_string(root, "compatible", + &soc_dev_attr->soc_id); + if (err) + return; + err = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (err) + return; + soc_dev_attr->family = "Integrator"; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", + 'A' + (intcp_sc_id & 0x0f)); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + + if (!IS_ERR_OR_NULL(parent)) + integrator_init_sysfs(parent, intcp_sc_id); + + of_platform_populate(root, of_default_bus_match_table, + intcp_auxdata_lookup, parent); } static const char * intcp_dt_board_compat[] = { @@ -350,7 +387,6 @@ static const char * intcp_dt_board_compat[] = { DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .reserve = integrator_reserve, .map_io = intcp_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_CP, .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, .handle_irq = fpga_handle_irq, @@ -365,6 +401,28 @@ MACHINE_END #ifdef CONFIG_ATAGS /* + * For the ATAG boot some static mappings are needed. This will + * go away with the ATAG support down the road. + */ + +static struct map_desc intcp_io_desc_atag[] __initdata = { + { + .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, +}; + +static void __init intcp_map_io_atag(void) +{ + iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag)); + intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE); + intcp_map_io(); +} + + +/* * This is where non-devicetree initialization code is collected and stashed * for eventual deletion. */ @@ -423,7 +481,7 @@ static void __init intcp_init_irq(void) u32 pic_mask, cic_mask, sic_mask; /* These masks are for the HW IRQ registers */ - pic_mask = ~((~0u) << (11 - IRQ_PIC_START)); + pic_mask = ~((~0u) << (11 - 0)); pic_mask |= (~((~0u) << (29 - 22))) << 22; cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); @@ -503,8 +561,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, .reserve = integrator_reserve, - .map_io = intcp_map_io, - .nr_irqs = NR_IRQS_INTEGRATOR_CP, + .map_io = intcp_map_io_atag, .init_early = intcp_init_early, .init_irq = intcp_init_irq, .handle_irq = fpga_handle_irq, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index bbeca59df66b..be50e795536d 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -191,12 +191,9 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, /* * Trap out illegal values */ - if (offset > 255) - BUG(); - if (busnr > 255) - BUG(); - if (devfn > 255) - BUG(); + BUG_ON(offset > 255); + BUG_ON(busnr > 255); + BUG_ON(devfn > 255); if (busnr == 0) { int slot = PCI_SLOT(devfn); @@ -388,9 +385,10 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI __io_address(INTEGRATOR_SC_PCIENABLE) -#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20) -#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24) +static void __iomem *ap_syscon_base; +#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 +#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20 +#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24 static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -401,13 +399,13 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) char buf[128]; sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", - addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printk(KERN_DEBUG "%s", buf); #endif v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * If the instruction being executed was a read, @@ -449,15 +447,15 @@ static irqreturn_t v3_irq(int dummy, void *devid) sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, - __raw_readl(SC_LBFADDR), - __raw_readl(SC_LBFCODE) & 255, + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printascii(buf); #endif v3_writew(V3_PCI_STAT, 0xf000); v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); #ifdef CONFIG_DEBUG_LL /* @@ -480,6 +478,10 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) + return -EINVAL; } return ret; @@ -568,7 +570,7 @@ void __init pci_v3_preinit(void) v3_writeb(V3_LB_ISTAT, 0); v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); v3_writeb(V3_LB_IMASK, 0x28); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * Grab the PCI error interrupt. diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 1694f01ce2b6..6d6bde3e15fa 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void) * Enable the IO window to be way up high, at 0xfffffc00 */ local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); + local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ } else { printk("PCI: IXP4xx is target - No bus scan performed\n"); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fdf91a160884..8c0c0e2d0727 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -67,15 +67,12 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE - }, -#ifdef CONFIG_DEBUG_LL - { /* Debug UART mapping */ - .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), - .length = IXP4XX_DEBUG_UART_REGION_SIZE, + }, { /* Queue Manager */ + .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), + .length = IXP4XX_QMGR_REGION_SIZE, .type = MT_DEVICE - } -#endif + }, }; void __init ixp4xx_map_io(void) diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index b800a031207c..53b8348dfcc2 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -15,6 +15,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/pci.h> +#include <asm/system_info.h> #define SLOT_ETHA 0x0B /* IDSEL = AD21 */ #define SLOT_ETHB 0x0C /* IDSEL = AD20 */ @@ -329,7 +330,7 @@ static struct platform_device device_hss_tab[] = { }; -static struct platform_device *device_tab[6] __initdata = { +static struct platform_device *device_tab[7] __initdata = { &device_flash, /* index 0 */ }; diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 8c9f8d564492..ff686cbc5df4 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -17,8 +17,8 @@ #else mov \rp, #0 #endif - orr \rv, \rp, #0xff000000 @ virtual - orr \rv, \rv, #0x00b00000 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00f00000 orr \rp, \rp, #0xc8000000 @ physical .endm diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index eb68b61ce975..c5bae9c035d5 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -30,51 +30,43 @@ * * 0x50000000 0x10000000 ioremap'd EXP BUS * - * 0x6000000 0x00004000 ioremap'd QMgr + * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG + * 0xC0000000 0x00001000 0xFEF13000 PCI CFG * - * 0xC4000000 0x00001000 0xffbfe000 EXP CFG + * 0xC4000000 0x00001000 0xFEF14000 EXP CFG * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals + * 0x60000000 0x00004000 0xFEF15000 QMgr */ /* * Queue Manager */ -#define IXP4XX_QMGR_BASE_PHYS (0x60000000) -#define IXP4XX_QMGR_REGION_SIZE (0x00004000) +#define IXP4XX_QMGR_BASE_PHYS 0x60000000 +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) +#define IXP4XX_QMGR_REGION_SIZE 0x00004000 /* - * Expansion BUS Configuration registers + * Peripheral space, including debug UART. Must be section-aligned so that + * it can be used with the low-level debug code. */ -#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000) -#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) +#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000) +#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 /* * PCI Config registers */ -#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000) -#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) +#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000) +#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 /* - * Debug UART - * - * This is basically a remap of UART1 into a region that is section - * aligned so that it * can be used with the low-level debug code. + * Expansion BUS Configuration registers */ -#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000) -#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) +#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 +#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000 +#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 9e7cad2d54cb..4de8da536dbb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue); static inline void qmgr_put_entry(unsigned int queue, u32 val) { - extern struct qmgr_regs __iomem *qmgr_regs; + struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val) static inline u32 qmgr_get_entry(unsigned int queue) { u32 val; - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; val = __raw_readl(&qmgr_regs->acc[queue][0]); #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue) static inline int __qmgr_get_stat1(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } static inline int __qmgr_get_stat2(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; @@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue) */ static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statne_h) >> (queue - HALF_QUEUES)) & 0x01; @@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue) */ static inline int qmgr_stat_full(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statf_h) >> (queue - HALF_QUEUES)) & 0x01; diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h index 80d6da2eafac..7bd8b96c8843 100644 --- a/arch/arm/mach-ixp4xx/include/mach/udc.h +++ b/arch/arm/mach-ixp4xx/include/mach/udc.h @@ -2,7 +2,7 @@ * arch/arm/mach-ixp4xx/include/mach/udc.h * */ -#include <asm/mach/udc_pxa2xx.h> +#include <linux/platform_data/pxa2xx_udc.h> extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index a17ed79207a4..d4eb09a62863 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -116,7 +116,11 @@ /* NPE mailbox_status value for reset */ #define RESET_MBOX_STAT 0x0000F0F0 -const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" }; +#define NPE_A_FIRMWARE "NPE-A" +#define NPE_B_FIRMWARE "NPE-B" +#define NPE_C_FIRMWARE "NPE-C" + +const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; #define print_npe(pri, npe, fmt, ...) \ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) @@ -724,6 +728,9 @@ module_exit(npe_cleanup_module); MODULE_AUTHOR("Krzysztof Halasa"); MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(NPE_A_FIRMWARE); +MODULE_FIRMWARE(NPE_B_FIRMWARE); +MODULE_FIRMWARE(NPE_C_FIRMWARE); EXPORT_SYMBOL(npe_names); EXPORT_SYMBOL(npe_running); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index 852f7c9f87d0..9d1b6b7c394c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -14,7 +14,7 @@ #include <linux/module.h> #include <mach/qmgr.h> -struct qmgr_regs __iomem *qmgr_regs; +static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ @@ -293,12 +293,6 @@ static int qmgr_init(void) if (mem_res == NULL) return -EBUSY; - qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - if (qmgr_regs == NULL) { - err = -ENOMEM; - goto error_map; - } - /* reset qmgr registers */ for (i = 0; i < 4; i++) { __raw_writel(0x33333333, &qmgr_regs->stat1[i]); @@ -347,8 +341,6 @@ static int qmgr_init(void) error_irq2: free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: - iounmap(qmgr_regs); -error_map: release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); return err; } @@ -359,7 +351,6 @@ static void qmgr_remove(void) free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); synchronize_irq(IRQ_IXP4XX_QM2); - iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } @@ -369,7 +360,6 @@ module_exit(qmgr_remove); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Krzysztof Halasa"); -EXPORT_SYMBOL(qmgr_regs); EXPORT_SYMBOL(qmgr_set_irq); EXPORT_SYMBOL(qmgr_enable_irq); EXPORT_SYMBOL(qmgr_disable_irq); diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 50bca5032b7e..d018ad4bcc3c 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -130,6 +130,63 @@ config MACH_KM_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Keymile Kirkwood Reference Desgin, using Flattened Device Tree. +config MACH_INETSPACE_V2_DT + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Internet Space v2 NAS, using Flattened Device Tree. + +config MACH_MPLCEC4_DT + bool "MPL CEC4 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + MPL CEC4 (Flattened Device Tree). + +config MACH_NETSPACE_V2_DT + bool "LaCie Network Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MAX_V2_DT + bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Max v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_LITE_V2_DT + bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Lite v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MINI_V2_DT + bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Mini v2 NAS (aka SafeBox), using Flattened + Device Tree. + +config MACH_OPENBLOCKS_A6_DT + bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Plat'Home OpenBlocks A6 (Flattened Device Tree). + +config MACH_TOPKICK_DT + bool "USI Topkick (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + USI Topkick, using Flattened Device Tree + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help @@ -216,6 +273,14 @@ config MACH_T5325 Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. +config MACH_NSA310_DT + bool "ZyXEL NSA-310 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the + ZyXEL NSA-310 board (Flattened Device Tree). + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 294779f892d9..8d2e5a96247c 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -31,3 +31,12 @@ obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o +obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c index f2fbb023e679..6912882b0aa9 100644 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -16,21 +16,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 20af53a56c0e..8a8ebe09e512 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -13,23 +13,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d94872fed8c0..375f7d88551c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -26,10 +26,12 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { { } }; -struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { +static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011100, "mv64xxx_i2c.1", + NULL), OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), @@ -94,11 +96,30 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("keymile,km_kirkwood")) km_kirkwood_init(); + if (of_machine_is_compatible("lacie,inetspace_v2") || + of_machine_is_compatible("lacie,netspace_v2") || + of_machine_is_compatible("lacie,netspace_max_v2") || + of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_init(); + + if (of_machine_is_compatible("mpl,cec4")) + mplcec4_init(); + + if (of_machine_is_compatible("plathome,openblocks-a6")) + openblocks_a6_init(); + + if (of_machine_is_compatible("usi,topkick")) + usi_topkick_init(); + + if (of_machine_is_compatible("zyxel,nsa310")) + nsa310_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } -static const char *kirkwood_dt_board_compat[] = { +static const char * const kirkwood_dt_board_compat[] = { "globalscale,dreamplug", "dlink,dns-320", "dlink,dns-325", @@ -110,6 +131,15 @@ static const char *kirkwood_dt_board_compat[] = { "buffalo,lsxl", "iom,ix2-200", "keymile,km_kirkwood", + "lacie,inetspace_v2", + "lacie,netspace_max_v2", + "lacie,netspace_v2", + "lacie,netspace_lite_v2", + "lacie,netspace_mini_v2", + "mpl,cec4", + "plathome,openblocks-a6", + "usi,topkick", + "zyxel,nsa310", NULL }; diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c index 001ca8c96980..5dcd0d62aa42 100644 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -18,21 +18,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index cfc47f80e734..6d3a56421142 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -13,15 +13,9 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index d084b1e2943a..24f5aa7f698b 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -10,16 +10,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c index 158fb97d0397..e4ed62c28f54 100644 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -10,10 +10,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 83d8975592f8..7e18cad9b796 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -14,17 +14,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/gpio-fan.h> -#include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" @@ -53,51 +44,6 @@ static unsigned int lsxl_mpp_config[] __initdata = { 0 }; -#define LSXL_GPIO_FAN_HIGH 18 -#define LSXL_GPIO_FAN_LOW 19 -#define LSXL_GPIO_FAN_LOCK 40 - -static struct gpio_fan_alarm lsxl_alarm = { - .gpio = LSXL_GPIO_FAN_LOCK, -}; - -static struct gpio_fan_speed lsxl_speeds[] = { - { - .rpm = 0, - .ctrl_val = 3, - }, { - .rpm = 1500, - .ctrl_val = 1, - }, { - .rpm = 3250, - .ctrl_val = 2, - }, { - .rpm = 5000, - .ctrl_val = 0, - } -}; - -static int lsxl_gpio_list[] = { - LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, -}; - -static struct gpio_fan_platform_data lsxl_fan_data = { - .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), - .ctrl = lsxl_gpio_list, - .alarm = &lsxl_alarm, - .num_speed = ARRAY_SIZE(lsxl_speeds), - .speed = lsxl_speeds, -}; - -static struct platform_device lsxl_fan_device = { - .name = "gpio-fan", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lsxl_fan_data, - }, -}; - /* * On the LS-XHL/LS-CHLv2, the shutdown process is following: * - Userland monitors key events until the power switch goes to off position @@ -128,7 +74,6 @@ void __init lsxl_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&lsxl_ge00_data); kirkwood_ge01_init(&lsxl_ge01_data); - platform_device_register(&lsxl_fan_device); /* register power-off method */ pm_power_off = lsxl_power_off; diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c new file mode 100644 index 000000000000..e78a227468e6 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2012 MPL AG, Switzerland + * Stefan Peter <s.peter@mpl.ch> + * + * arch/arm/mach-kirkwood/board-mplcec4.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mplcec4_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv643xx_eth_platform_data mplcec4_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(2), +}; + +static unsigned int mplcec4_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Status LED Green High Active */ + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_SD_CLK, + MPP13_SD_CMD, /* Alt UART1_TXD */ + MPP14_SD_D0, /* Alt UART1_RXD */ + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP28_GPIO, /* Input SYS_POR_DET (active High) */ + MPP29_GPIO, /* Input SYS_RTC_INT (active High) */ + MPP34_SATA1_ACTn, + MPP35_SATA0_ACTn, + MPP40_GPIO, /* LED User1 orange */ + MPP41_GPIO, /* LED User1 green */ + MPP44_GPIO, /* LED User0 orange */ + MPP45_GPIO, /* LED User0 green */ + MPP46_GPIO, /* Status LED Yellow High Active */ + MPP47_GPIO, /* SD_CD# (in/IRQ)*/ + 0 +}; + + +static struct mvsdio_platform_data mplcec4_mvsdio_data = { + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + + + +void __init mplcec4_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(mplcec4_mpp_config); + kirkwood_ehci_init(); + kirkwood_ge00_init(&mplcec4_ge00_data); + kirkwood_ge01_init(&mplcec4_ge01_data); + kirkwood_sdio_init(&mplcec4_mvsdio_data); + kirkwood_pcie_init(KW_PCIE0); +} + + + diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c new file mode 100644 index 000000000000..78596c4f76d2 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -0,0 +1,87 @@ +/* + * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org> + * + * arch/arm/mach-kirkwood/board-ns2.c + * + * LaCie Network Space v2 board (and parents) initialization for drivers + * not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data ns2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int ns2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_GPIO, /* Fan speed (bit 0) */ + MPP23_GPIO, /* Fan power */ + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP33_GPO, /* Fan speed (bit 2) */ + 0 +}; + +#define NS2_GPIO_POWER_OFF 31 + +static void ns2_power_off(void) +{ + gpio_set_value(NS2_GPIO_POWER_OFF, 1); +} + +void __init ns2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(ns2_mpp_config); + + kirkwood_ehci_init(); + if (of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + kirkwood_ge00_init(&ns2_ge00_data); + + if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = ns2_power_off; + else + pr_err("ns2: failed to configure power-off GPIO\n"); +} diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c new file mode 100644 index 000000000000..027ce83f3fe5 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-nsa310.c @@ -0,0 +1,105 @@ +/* + * arch/arm/mach-kirkwood/nsa-310-setup.c + * + * ZyXEL NSA-310 Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +#define NSA310_GPIO_USB_POWER_OFF 21 +#define NSA310_GPIO_POWER_OFF 48 + +static unsigned int nsa310_mpp_config[] __initdata = { + MPP12_GPIO, /* led esata green */ + MPP13_GPIO, /* led esata red */ + MPP15_GPIO, /* led usb green */ + MPP16_GPIO, /* led usb red */ + MPP21_GPIO, /* control usb power off */ + MPP28_GPIO, /* led sys green */ + MPP29_GPIO, /* led sys red */ + MPP36_GPIO, /* key reset */ + MPP37_GPIO, /* key copy */ + MPP39_GPIO, /* led copy green */ + MPP40_GPIO, /* led copy red */ + MPP41_GPIO, /* led hdd green */ + MPP42_GPIO, /* led hdd red */ + MPP44_GPIO, /* ?? */ + MPP46_GPIO, /* key power */ + MPP48_GPIO, /* control power off */ + 0 +}; + +static struct i2c_board_info __initdata nsa310_i2c_info[] = { + { I2C_BOARD_INFO("adt7476", 0x2e) }, +}; + +static void nsa310_power_off(void) +{ + gpio_set_value(NSA310_GPIO_POWER_OFF, 1); +} + +static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags, + const char *label) +{ + int err; + + err = gpio_request_one(gpio, flags, label); + if (err) + pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n", + gpio, label, err); + + return err; +} + +static void __init nsa310_gpio_init(void) +{ + int err; + + err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW, + "Power Off"); + if (!err) + pm_power_off = nsa310_power_off; + + nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW, + "USB Power Off"); +} + +void __init nsa310_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(nsa310_mpp_config); + + nsa310_gpio_init(); + + /* this can be removed once the mainline kirkwood.dtsi gets + * the ehci configuration by default */ + kirkwood_ehci_init(); + + kirkwood_pcie_id(&dev, &rev); + + i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); +} + +static int __init nsa310_pci_init(void) +{ + if (of_machine_is_compatible("zyxel,nsa310")) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} + +subsys_initcall(nsa310_pci_init); diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c new file mode 100644 index 000000000000..e807e8cfdd44 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c @@ -0,0 +1,71 @@ +/* + * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * arch/arm/mach-kirkwood/board-openblocks_a6.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/clk.h> +#include <linux/clk-private.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data openblocks_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int openblocks_a6_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_UART1_RTS, + MPP9_UART1_CTS, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, + MPP14_UART1_RXD, + MPP15_UART0_RTS, + MPP16_UART0_CTS, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, /* DIP SW0 */ + MPP21_GPIO, /* DIP SW1 */ + MPP22_GPIO, /* DIP SW2 */ + MPP23_GPIO, /* DIP SW3 */ + MPP24_GPIO, /* GPIO 0 */ + MPP25_GPIO, /* GPIO 1 */ + MPP26_GPIO, /* GPIO 2 */ + MPP27_GPIO, /* GPIO 3 */ + MPP28_GPIO, /* GPIO 4 */ + MPP29_GPIO, /* GPIO 5 */ + MPP30_GPIO, /* GPIO 6 */ + MPP31_GPIO, /* GPIO 7 */ + MPP36_TW1_SDA, + MPP37_TW1_SCK, + MPP38_GPIO, /* INIT */ + MPP39_GPIO, /* USB OC */ + MPP41_GPIO, /* LED: Red */ + MPP42_GPIO, /* LED: Yellow */ + MPP43_GPIO, /* LED: Green */ + 0, +}; + +void __init openblocks_a6_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(openblocks_a6_mpp_config); + kirkwood_ehci_init(); + kirkwood_ge00_init(&openblocks_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 1750e68506c1..f3bfedae3a20 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -19,9 +19,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c new file mode 100644 index 000000000000..e2ec9d891fe3 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -0,0 +1,82 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-usi_topkick.c + * + * USI Topkick Init for drivers not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data topkick_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mvsdio_platform_data topkick_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +/* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + +/* + * Switch positions + * + * /-SW_LEFT + * | + * | /-SW_IDLE + * | | + * | | /-SW_RIGHT + * | | | + * PS [L] [I] [R] LEDS + */ + +static unsigned int topkick_mpp_config[] __initdata = { + MPP21_GPIO, /* DISK_LED (low active) - yellow */ + MPP36_GPIO, /* SATA0 power enable (high active) */ + MPP37_GPIO, /* SYS_LED2 (low active) - red */ + MPP38_GPIO, /* SYS_LED (low active) - blue */ + MPP39_GPIO, /* WLAN_LED (low active) - green */ + MPP43_GPIO, /* SW_LEFT (low active) */ + MPP44_GPIO, /* SW_RIGHT (low active) */ + MPP45_GPIO, /* SW_IDLE (low active) */ + MPP46_GPIO, /* SW_LEFT (low active) */ + MPP48_GPIO, /* WLAN_LED2 (low active) - yellow */ + 0 +}; + +#define TOPKICK_SATA0_PWR_ENABLE 36 + +void __init usi_topkick_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(topkick_mpp_config); + + /* SATA0 power enable */ + gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&topkick_ge00_data); + kirkwood_sdio_init(&topkick_mvsdio_data); +} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 2c6c218fb79e..5303be62b311 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -18,10 +18,10 @@ #include <linux/clk-provider.h> #include <linux/spinlock.h> #include <linux/mv643xx_i2c.h> +#include <linux/timex.h> +#include <linux/kexec.h> #include <net/dsa.h> #include <asm/page.h> -#include <asm/timex.h> -#include <asm/kexec.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/kirkwood.h> @@ -266,6 +266,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., * so should never be gated. @@ -425,7 +426,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) /***************************************************************************** * SPI ****************************************************************************/ -void __init kirkwood_spi_init() +void __init kirkwood_spi_init(void) { orion_spi_init(SPI_PHYS_BASE); } @@ -646,8 +647,7 @@ void __init kirkwood_l2_init(void) void __init kirkwood_init(void) { - printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", - kirkwood_id(), kirkwood_tclk); + pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); /* * Disable propagation of mbus errors to the CPU local bus, @@ -671,7 +671,7 @@ void __init kirkwood_init(void) kirkwood_xor1_init(); kirkwood_crypto_init(); -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; #endif } diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index bcffd7ca1ca2..5ffa57f08c80 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -47,7 +47,8 @@ void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); -void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); +void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, + int (*dev_ready)(struct mtd_info *)); void kirkwood_audio_init(void); void kirkwood_restart(char, const char *); void kirkwood_clk_init(void); @@ -112,6 +113,40 @@ void km_kirkwood_init(void); static inline void km_kirkwood_init(void) {}; #endif +#ifdef CONFIG_MACH_MPLCEC4_DT +void mplcec4_init(void); +#else +static inline void mplcec4_init(void) {}; +#endif + +#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MINI_V2_DT) +void ns2_init(void); +#else +static inline void ns2_init(void) {}; +#endif + +#ifdef CONFIG_MACH_NSA310_DT +void nsa310_init(void); +#else +static inline void nsa310_init(void) {}; +#endif + +#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT +void openblocks_a6_init(void); +#else +static inline void openblocks_a6_init(void) {}; +#endif + +#ifdef CONFIG_MACH_TOPKICK_DT +void usi_topkick_init(void); +#else +static inline void usi_topkick_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index 0f1710941878..f7304670f2f8 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void) cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { - printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); + pr_err("kirkwood_init_cpuidle: Failed registering\n"); return -EIO; } return 0; diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index 23dcb19cc2a7..791a98fafa29 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -93,7 +93,7 @@ static void __init dockstar_init(void) if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) - printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); kirkwood_ehci_init(); kirkwood_ge00_init(&dockstar_ge00_data); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 884703535a0a..2a97a2e4163c 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -14,6 +14,7 @@ #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include "common.h" static int __initdata gpio0_irqs[4] = { IRQ_KIRKWOOD_GPIO_LOW_0_7, diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c index 285edab776e9..489495976fcd 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -19,6 +19,7 @@ #include <mach/irqs.h> #include <plat/time.h> #include "common.h" +#include "lacie_v2-common.h" /***************************************************************************** * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 0c6ad63f10c7..827cde42414f 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void) if (dev == MV88F6180_DEV_ID) return MPP_F6180_MASK; - printk(KERN_ERR "MPP setup: unknown kirkwood variant " - "(dev %#x rev %#x)\n", dev, rev); + pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n", + dev, rev); return 0; } diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 88b0788bacae..728e86d33f0c 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = { .name = "gpio-keys", .id = -1, .dev = { - .platform_data = &netspace_v2_button_data, + .platform_data = &netspace_v2_button_data, }, }; @@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = { MPP29_GPIO, /* Blue led (slow register) */ MPP30_GPIO, /* Blue led (command register) */ MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ MPP33_GPO, /* Fan speed (bit 2) */ 0 }; diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 134ef50d58fc..7e81e9b586bf 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void) kirkwood_mpp_conf(openrd_uart1_mpp_config); if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 selection" - ", gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); return -EIO; } if (gpio_request(28, "RS232_RS485_SEL")) { - printk(KERN_ERR "GPIO request failed for RS232/RS485 selection" - ", gpio# 28\n"); + pr_err("GPIO request 28 failed for RS232/RS485 selection\n"); gpio_free(34); return -EIO; } @@ -185,15 +183,13 @@ static void __init openrd_init(void) if (uart1 <= 0) { if (uart1 < 0) - printk(KERN_ERR "Invalid kernel parameter to select " - "UART1. Defaulting to SD. ERROR CODE: %d\n", - uart1); + pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n", + uart1); /* Select SD * Pin # 34: 0 => UART1, 1 => SD */ if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 " - "selection, gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); } else { gpio_direction_output(34, 1); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ec544918b12c..ef102646ba9a 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port) clk = clk_get_sys("pcie", port); if (IS_ERR(clk)) { - printk(KERN_ERR "PCIE clock %s missing\n", port); + pr_err("PCIE clock %s missing\n", port); return; } clk_prepare_enable(clk); @@ -168,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 0; index = pcie_port_map[nr]; - printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index); + pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index); pp = kzalloc(sizeof(*pp), GFP_KERNEL); if (!pp) @@ -186,7 +186,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) case 1: kirkwood_enable_pcie_clk("1"); pcie1_ioresources_init(pp); - pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE); + pci_ioremap_io(SZ_64K * sys->busnr, + KIRKWOOD_PCIE1_IO_PHYS_BASE); break; default: panic("PCIe setup: invalid controller %d", index); @@ -207,14 +208,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } +/* + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it + * is operating as a root complex this needs to be switched to + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on + * the device. Decoding setup is handled by the orion code. + */ static void __devinit rc_pci_fixup(struct pci_dev *dev) { - /* - * Prevent enumeration of root complex. - */ if (dev->bus->parent == NULL && dev->devfn == 0) { int i; + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; @@ -224,22 +230,6 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); -static struct pci_bus __init * -kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_bus *bus; - - if (nr < num_pcie_ports) { - bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, - &sys->resources); - } else { - bus = NULL; - BUG(); - } - - return bus; -} - static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -251,19 +241,19 @@ static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, static struct hw_pci kirkwood_pci __initdata = { .setup = kirkwood_pcie_setup, - .scan = kirkwood_pcie_scan_bus, .map_irq = kirkwood_pcie_map_irq, + .ops = &pcie_ops, }; static void __init add_pcie_port(int index, void __iomem *base) { - printk(KERN_INFO "Kirkwood PCIe port %d: ", index); + pr_info("Kirkwood PCIe port %d: ", index); if (orion_pcie_link_up(base)) { - printk(KERN_INFO "link up\n"); + pr_info("link up\n"); pcie_port_map[num_pcie_ports++] = index; } else - printk(KERN_INFO "link down, ignoring\n"); + pr_info("link down, ignoring\n"); } void __init kirkwood_pcie_init(unsigned int portmask) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 28d0abaf4bd9..8a175948b28d 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -117,7 +117,7 @@ static void __init sheevaplug_init(void) if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) - printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); kirkwood_ehci_init(); kirkwood_ge00_init(&sheevaplug_ge00_data); diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index bad738e44044..f2daf711e72e 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -29,7 +29,7 @@ #include "common.h" #include "mpp.h" -struct mtd_partition hp_t5325_partitions[] = { +static struct mtd_partition hp_t5325_partitions[] = { { .name = "u-boot env", .size = SZ_64K, @@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = { }, }; -const struct flash_platform_data hp_t5325_flash = { +static const struct flash_platform_data hp_t5325_flash = { .type = "mx25l8005", .name = "spi_flash", .parts = hp_t5325_partitions, .nr_parts = ARRAY_SIZE(hp_t5325_partitions), }; -struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { +static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &hp_t5325_flash, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 367a9400f532..e4c61279ea86 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -170,8 +170,7 @@ static int __init ts41x_pci_init(void) else kirkwood_pcie_init(KW_PCIE0); } - - return 0; + return 0; } subsys_initcall(ts41x_pci_init); diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index 8943ede29b44..cec87cef76ca 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -7,6 +7,7 @@ #include <linux/serial_reg.h> #include <mach/kirkwood.h> #include "common.h" +#include "tsx1x-common.h" /* * QNAP TS-x1x Boards flash @@ -29,7 +30,7 @@ * ***************************************************************************/ -struct mtd_partition qnap_tsx1x_partitions[] = { +static struct mtd_partition qnap_tsx1x_partitions[] = { { .name = "U-Boot", .size = 0x00080000, @@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = { }, }; -const struct flash_platform_data qnap_tsx1x_flash = { +static const struct flash_platform_data qnap_tsx1x_flash = { .type = "m25p128", .name = "spi_flash", .parts = qnap_tsx1x_partitions, .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions), }; -struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { +static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &qnap_tsx1x_flash, diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index f48c2e961b84..dd5d6f532e8c 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -585,6 +585,13 @@ static struct clk clk_timer3 = { .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN, .get_rate = local_return_parent_rate, }; +static struct clk clk_mpwm = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, + .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN, + .get_rate = local_return_parent_rate, +}; static struct clk clk_wdt = { .parent = &clk_pclk, .enable = local_onoff_enable, @@ -1202,6 +1209,7 @@ static struct clk_lookup lookups[] = { CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), + CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm), CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index acc4aabf1c7b..b5612a1d1839 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -515,6 +515,7 @@ /* * clkpwr_timers_pwms_clk_ctrl_1 register definitions */ +#define LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN 0x40 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN 0x20 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN 0x10 #define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN 0x08 diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 3c6332753358..9ecb8f9c4ef5 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -412,7 +412,6 @@ static const struct of_device_id mic_of_match[] __initconst = { void __init lpc32xx_init_irq(void) { unsigned int i; - int irq_base; /* Setup MIC */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); @@ -443,15 +442,6 @@ void __init lpc32xx_init_irq(void) lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32); lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64); - /* mask all interrupts except SUBIRQ */ - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - - /* MIC SUBIRQx interrupts will route handling to the chain handlers */ - irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); - irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); - /* Initially disable all wake events */ __raw_writel(0, LPC32XX_CLKPWR_P01_ER); __raw_writel(0, LPC32XX_CLKPWR_INT_ER); @@ -475,16 +465,13 @@ void __init lpc32xx_init_irq(void) of_irq_init(mic_of_match); - irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0); - if (irq_base < 0) { - pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n"); - irq_base = 0; - } - lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS, - irq_base, 0, - &irq_domain_simple_ops, + 0, 0, &irq_domain_simple_ops, NULL); if (!lpc32xx_mic_domain) panic("Unable to add MIC irq domain\n"); + + /* MIC SUBIRQx interrupts will route handling to the chain handlers */ + irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); + irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); } diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 178d4daa5e1d..ebdda8346a26 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -89,6 +89,8 @@ config MACH_MMP_DT select CPU_PXA168 select CPU_PXA910 select USE_OF + select PINCTRL + select PINCTRL_SINGLE help Include support for Marvell MMP2 based platforms using the device tree. Needn't select any other machine while @@ -99,6 +101,8 @@ config MACH_MMP2_DT depends on !CPU_MOHAWK select CPU_MMP2 select USE_OF + select PINCTRL + select PINCTRL_SINGLE help Include support for Marvell MMP2 based platforms using the device tree. diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index bfa1eab91f41..22ef8a1abe08 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -24,6 +24,7 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/hardware/vic.h> #include <asm/sizes.h> #include <asm/mach-types.h> @@ -32,9 +33,7 @@ #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <plat/gpio-nomadik.h> #include <plat/mtu.h> -#include <plat/pincfg.h> #include <linux/platform_data/mtd-nomadik-nand.h> #include <mach/fsmc.h> diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index b617eaed0ce5..1273931303fb 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -26,8 +26,8 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index 6d14454d4609..0c2f6628299a 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -4,8 +4,7 @@ #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> #include <linux/platform_device.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> +#include <linux/platform_data/pinctrl-nomadik.h> /* * There are two busses in the 8815NHK. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index cd169c386161..f0e69cbc5baa 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ + serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index e255164ff087..a8fce3ccc707 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .atag_offset = 0x100, .map_io = ams_delta_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 4b6de70c47a6..560a7dcf0a56 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -27,16 +27,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> #include <mach/flash.h> -#include <plat/fpga.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" /* fsample is pretty close to p2-sample */ @@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = { static void __init fsample_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -307,8 +307,7 @@ static void __init omap_fsample_init(void) fsample_init_smc91x(); - if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); @@ -362,7 +361,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .atag_offset = 0x100, .map_io = omap_fsample_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 4ec579fdd366..608e7d2a2778 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index e1362ce48497..7119ef28e0ad 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -13,12 +13,11 @@ */ #include <linux/gpio.h> #include <linux/platform_device.h> - +#include <linux/platform_data/gpio-omap.h> #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h2.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 376f7f29ef77..4953cf7a5123 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,8 +39,8 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> #include <mach/flash.h> @@ -50,6 +50,7 @@ #include "common.h" #include "board-h2.h" +#include "dma.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 @@ -411,8 +412,7 @@ static void __init h2_init(void) h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; - if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); @@ -458,7 +458,6 @@ MACHINE_START(OMAP_H2, "TI-H2") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h2_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index c74daace8cd6..17d77914d769 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,9 +16,8 @@ #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h3.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ededdb7ef28c..563ba167bb16 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -41,9 +41,9 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/flash.h> #include <mach/hardware.h> @@ -406,8 +406,7 @@ static void __init h3_init(void) nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; nand_resource.end += SZ_4K - 1; - if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ @@ -452,7 +451,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h3_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 87ab2086ef96..356f816c84a6 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -43,7 +43,7 @@ #include <asm/mach/arch.h> #include <mach/omap7xx.h> -#include <plat/mmc.h> +#include "mmc.h" #include <mach/irqs.h> #include <mach/usb.h> @@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald") .atag_offset = 0x100, .map_io = htcherald_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index db5f7d2976e7..f8033fab0f82 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -33,16 +33,15 @@ #include <mach/mux.h> #include <mach/flash.h> -#include <plat/fpga.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/mmc.h> #include <mach/hardware.h> #include <mach/usb.h> #include "iomap.h" #include "common.h" +#include "mmc.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 @@ -215,7 +214,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { static int innovator_get_pendown_state(void) { - return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); + return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); } static const struct ads7846_platform_data innovator1510_ts_info = { @@ -279,7 +278,7 @@ static struct platform_device *innovator1610_devices[] __initdata = { static void __init innovator_init_smc91x(void) { if (cpu_is_omap1510()) { - fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1, + __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, OMAP1510_FPGA_RST); udelay(750); } else { @@ -335,10 +334,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { if (power_on) - fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), OMAP1510_FPGA_POWER); else - fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), OMAP1510_FPGA_POWER); return 0; @@ -390,14 +389,14 @@ static void __init innovator_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); @@ -437,6 +436,7 @@ static void __init innovator_init(void) */ static void __init innovator_map_io(void) { +#ifdef CONFIG_ARCH_OMAP15XX omap15xx_map_io(); iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); @@ -444,9 +444,10 @@ static void __init innovator_map_io(void) /* Dump the Innovator FPGA rev early - useful info for support. */ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - fpga_read(OMAP1510_FPGA_REV_HIGH), - fpga_read(OMAP1510_FPGA_REV_LOW), - fpga_read(OMAP1510_FPGA_BOARD_REV)); + __raw_readb(OMAP1510_FPGA_REV_HIGH), + __raw_readb(OMAP1510_FPGA_REV_LOW), + __raw_readb(OMAP1510_FPGA_BOARD_REV)); +#endif } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") @@ -454,7 +455,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .atag_offset = 0x100, .map_io = innovator_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = innovator_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7d5c06d6a52a..3e8ead67e459 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -29,13 +29,13 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/mmc.h> -#include <plat/clock.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "clock.h" +#include "mmc.h" #define ADS7846_PENDOWN_GPIO 15 @@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5973945a8741..872ea47cd28a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -48,7 +48,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = osk_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 1c578d58923a..584b6fab894b 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -36,8 +36,8 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> -#include <plat/dma.h> +#include <mach/tc.h> +#include <plat-omap/dma-omap.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 @@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 97158095083c..fbc986bfe69e 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -28,16 +28,16 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/platform_data/leds-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/led.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e311032e7eeb..60d917a93763 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -38,8 +38,8 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -47,6 +47,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 198b05417bfc..27f8d12ec222 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -28,15 +28,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/fpga.h> #include <mach/flash.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), @@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = { static void __init perseus2_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -275,8 +275,7 @@ static void __init omap_perseus2_init(void) perseus2_init_smc91x(); - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); @@ -324,7 +323,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .atag_offset = 0x100, .map_io = omap_perseus2_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 5932d56e17bf..4fcf19c78a08 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -16,9 +16,10 @@ #include <linux/platform_device.h> #include <mach/hardware.h> -#include <plat/mmc.h> #include <mach/board-sx1.h> +#include "mmc.h" + #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 13bf2cc56814..1ebc7e08d6e5 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -36,15 +36,16 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/irda.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/board-sx1.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "dma.h" /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) @@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index ad75e3411d46..abf705f49b19 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -34,7 +34,7 @@ #include <mach/board-voiceblue.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 638f4070fc70..4f5fd4a084c0 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -21,21 +22,21 @@ #include <asm/mach-types.h> -#include <plat/cpu.h> -#include <plat/usb.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/clkdev_omap.h> - #include <mach/hardware.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "opp.h" +#include "sram.h" __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + /* * Omap1 specific clock functions */ @@ -607,3 +608,497 @@ void omap1_clk_disable_unused(struct clk *clk) } #endif + + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + pr_err("Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + + omap1_clk_disable(clk); + +out: + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * Optional clock functions defined in include/linux/clk.h + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_set_rate(clk, rate); + if (ret == 0) + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); + + return -EINVAL; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * OMAP specific clock functions shared between omap1 and omap2 + */ + +int __initdata mpurate; + +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) +{ + get_option(&str, &mpurate); + + if (!mpurate) + return 1; + + if (mpurate < 1000) + mpurate *= 1000000; + + return 1; +} +__setup("mpurate=", omap_clk_setup); + +/* Used for clocks that always have same value as the parent clock */ +unsigned long followparent_recalc(struct clk *clk) +{ + return clk->parent->rate; +} + +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +unsigned long omap_fixed_divisor_recalc(struct clk *clk) +{ + WARN_ON(!clk->fixed_div); + + return clk->parent->rate / clk->fixed_div; +} + +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + +/* Propagate rate to children */ +void propagate_rate(struct clk *tclk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +static LIST_HEAD(root_clks); + +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + + list_add(&clk->node, &clocks); + if (clk->init) + clk->init(clk); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->sibling); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); +} + +/** + * omap_clk_get_by_name - locate OMAP struct clk by its name + * @name: name of the struct clk to locate + * + * Locate an OMAP struct clk by its name. Assumes that struct clk + * names are unique. Returns NULL if not found or a pointer to the + * struct clk if found. + */ +struct clk *omap_clk_get_by_name(const char *name) +{ + struct clk *c; + struct clk *ret = NULL; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(c, &clocks, node) { + if (!strcmp(c->name, name)) { + ret = c; + break; + } + } + + mutex_unlock(&clocks_mutex); + + return ret; +} + +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + +/* + * Dummy clock + * + * Used for clock aliases that are needed on some OMAPs, but not others + */ +struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_null, +}; + +/* + * + */ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); + list_for_each_entry(ck, &clocks, node) { + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || !ck->enable_reg) + continue; + + omap1_clk_disable_unused(ck); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) +/* + * debugfs support to trace clock tree hierarchy and attributes + */ + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static struct dentry *clk_debugfs_root; + +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + mutex_lock(&clocks_mutex); + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, + c->usecount); + } + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int clk_debugfs_register_one(struct clk *c) +{ + int err; + struct dentry *d; + struct clk *pa = c->parent; + + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); + if (!d) + return -ENOMEM; + c->dent = d; + + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + if (!d) { + err = -ENOMEM; + goto err_out; + } + return 0; + +err_out: + debugfs_remove_recursive(c->dent); + return err; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent; + + if (pa && !pa->dent) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (!c->dent) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clocks, node) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} +late_initcall(clk_debugfs_init); + +#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 3d04f4f67676..1e4918a3a5ee 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -14,8 +14,184 @@ #define __ARCH_ARM_MACH_OMAP1_CLOCK_H #include <linux/clk.h> +#include <linux/list.h> -#include <plat/clock.h> +#include <linux/clkdev.h> + +struct module; +struct clk; + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) /* 7xx, 850 */ +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ +#define CK_1710 (1 << 4) /* 1710 extra for rate selection */ + + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + u8 rate_offset; + u8 src_offset; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; int omap1_clk_init(void); void omap1_clk_late_init(void); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 9b45f4b0ee22..cb7c6ae2e3fc 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -22,16 +22,14 @@ #include <asm/mach-types.h> /* for machine_is_* */ -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/clkdev_omap.h> -#include <plat/sram.h> /* for omap_sram_reprogram_clock() */ +#include "soc.h" #include <mach/hardware.h> #include <mach/usb.h> /* for OTG_BASE */ #include "iomap.h" #include "clock.h" +#include "sram.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ #define IDL_CLKOUT_ARM_SHIFT 12 @@ -765,14 +763,6 @@ static struct omap_clk omap_clks[] = { * init */ -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - static void __init omap1_show_rates(void) { pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", @@ -803,8 +793,6 @@ int __init omap1_clk_init(void) if (!cpu_is_omap15xx()) omap_writew(0, SOFT_REQ_REG2); - clk_init(&omap1_clk_functions); - /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index c2552b24f9f2..b53e0854422f 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -26,8 +26,10 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include <plat/common.h> #include <linux/mtd/mtd.h> +#include <linux/i2c-omap.h> + +#include <plat/i2c.h> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); @@ -38,6 +40,7 @@ static inline void omap7xx_map_io(void) #endif #ifdef CONFIG_ARCH_OMAP15XX +void omap1510_fpga_init_irq(void); void omap15xx_map_io(void); #else static inline void omap15xx_map_io(void) @@ -90,4 +93,6 @@ extern int ocpi_enable(void); static inline int ocpi_enable(void) { return 0; } #endif +extern u32 omap1_get_reset_sources(void); + #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index d3fec92c54cb..0af635205e8a 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -17,12 +17,12 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/platform_data/omap-wd-timer.h> + #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/mmc.h> #include <mach/omap7xx.h> #include <mach/camera.h> @@ -30,6 +30,9 @@ #include "common.h" #include "clock.h" +#include "dma.h" +#include "mmc.h" +#include "sram.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) @@ -175,6 +178,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[3].name = "tx"; res[3].flags = IORESOURCE_DMA; + if (cpu_is_omap7xx()) + data->slots[0].features = MMC_OMAP7XX; + if (cpu_is_omap15xx()) + data->slots[0].features = MMC_OMAP15XX; + if (cpu_is_omap16xx()) + data->slots[0].features = MMC_OMAP16XX; + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret == 0) ret = platform_device_add_data(pdev, data, sizeof(*data)); @@ -439,18 +449,31 @@ static struct resource wdt_resources[] = { }; static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, + .name = "omap_wdt", + .id = -1, .num_resources = ARRAY_SIZE(wdt_resources), .resource = wdt_resources, }; static int __init omap_init_wdt(void) { + struct omap_wd_timer_platform_data pdata; + int ret; + if (!cpu_is_omap16xx()) return -ENODEV; - return platform_device_register(&omap_wdt_device); + pdata.read_reset_sources = omap1_get_reset_sources; + + ret = platform_device_register(&omap_wdt_device); + if (!ret) { + ret = platform_device_add_data(&omap_wdt_device, &pdata, + sizeof(pdata)); + if (ret) + platform_device_del(&omap_wdt_device); + } + + return ret; } subsys_initcall(omap_init_wdt); #endif diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 29007fef84cd..978aed85d328 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,11 +25,13 @@ #include <linux/device.h> #include <linux/io.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irqs.h> +#include "dma.h" + #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 #define OMAP1_DMA_STRIDE 0x40 @@ -319,6 +321,9 @@ static int __init omap1_system_dma_init(void) d->dev_caps = ENABLE_1510_MODE; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + if (cpu_is_omap16xx()) + d->dev_caps = ENABLE_16XX_MODE; + d->dev_caps |= SRC_PORT; d->dev_caps |= DST_PORT; d->dev_caps |= SRC_INDEX; diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h new file mode 100644 index 000000000000..da6345dab03f --- /dev/null +++ b/arch/arm/mach-omap1/dma.h @@ -0,0 +1,83 @@ +/* + * OMAP1 DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP1_DMA_CHANNEL_H +#define __OMAP1_DMA_CHANNEL_H + +/* DMA channels for omap1 */ +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + +#endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 73ae6169aa4a..b3fb531af94e 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -10,7 +10,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 29ec50fc688d..8bd71b2d0967 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,11 +27,11 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <plat/fpga.h> - #include <mach/hardware.h> #include "iomap.h" +#include "common.h" +#include "fpga.h" static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h new file mode 100644 index 000000000000..4b4307a80e48 --- /dev/null +++ b/arch/arm/mach-omap1/fpga.h @@ -0,0 +1,52 @@ +/* + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) + +#endif diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 98e6f39224a4..02b3eb2e201c 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 33f419236b17..b9952a258d82 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 958ce9acee95..f5819b2b7cbe 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index a0551a6d7451..faca808cb3d9 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -19,11 +19,25 @@ * */ -#include <plat/i2c.h> +#include <linux/i2c-omap.h> #include <mach/mux.h> -#include <plat/cpu.h> +#include "soc.h" + +#include <plat/i2c.h> + +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP1_INT_I2C (32 + 4) + +static const char name[] = "omap_i2c"; -void __init omap1_i2c_mux_pins(int bus_id) +static struct resource i2c_resources[2] = { +}; + +static struct platform_device omap_i2c_devices[1] = { +}; + +static void __init omap1_i2c_mux_pins(int bus_id) { if (cpu_is_omap7xx()) { omap_cfg_reg(I2C_7XX_SDA); @@ -33,3 +47,47 @@ void __init omap1_i2c_mux_pins(int bus_id) omap_cfg_reg(I2C_SCL); } } + +int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, + int bus_id) +{ + struct platform_device *pdev; + struct resource *res; + + if (bus_id > 1) + return -EINVAL; + + omap1_i2c_mux_pins(bus_id); + + pdev = &omap_i2c_devices[bus_id - 1]; + pdev->id = bus_id; + pdev->name = name; + pdev->num_resources = ARRAY_SIZE(i2c_resources); + res = i2c_resources; + res[0].start = OMAP1_I2C_BASE; + res[0].end = res[0].start + OMAP_I2C_SIZE; + res[0].flags = IORESOURCE_MEM; + res[1].start = OMAP1_INT_I2C; + res[1].flags = IORESOURCE_IRQ; + pdev->resource = res; + + /* all OMAP1 have IP version 1 register set */ + pdata->rev = OMAP_I2C_IP_VERSION_1; + + /* all OMAP1 I2C are implemented like this */ + pdata->flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; + + /* how the cpu bus is wired up differs for 7xx only */ + + if (cpu_is_omap7xx()) + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; + else + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; + + pdev->dev.platform_data = pdata; + + return platform_device_register(pdev); +} diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index a1b846aacdaf..52de382fc804 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <asm/system_info.h> -#include <plat/cpu.h> +#include "soc.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 2b36a281dc84..5c1a26c9f490 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <plat/serial.h> +#include "serial.h" .pushsection .data omap_uart_phys: .word 0x0 diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index 88f08cab1717..78a8c6c24764 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -13,8 +13,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include "../../iomap.h" - .macro get_irqnr_preamble, base, tmp .endm diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h deleted file mode 100644 index ebf86c0f4f46..000000000000 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 84248d250adb..5875a5098d35 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -39,7 +39,7 @@ #include <asm/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include <plat/cpu.h> +#include <mach/soc.h> /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these @@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa); extern void omap_writew(u16 v, u32 pa); extern void omap_writel(u32 v, u32 pa); -#include <plat/tc.h> +#include <mach/tc.h> /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -72,7 +72,10 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ -#include <plat/serial.h> +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +#include <mach/serial.h> /* * --------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 901082def9bd..3c2530523111 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -19,7 +19,7 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include <plat/cpu.h> +#include <mach/soc.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h index 8fe05d6137c0..3d235244bf5c 100644 --- a/arch/arm/mach-omap1/include/mach/omap1510.h +++ b/arch/arm/mach-omap1/include/mach/omap1510.h @@ -45,5 +45,118 @@ #define OMAP1510_DSP_MMU_BASE (0xfffed200) +/* + * --------------------------------------------------------------------------- + * OMAP-1510 FPGA + * --------------------------------------------------------------------------- + */ +#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ + +/* Revision */ +#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) +#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) + +/* Interrupt status */ +#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) + +/* Interrupt mask */ +#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) + +/* Reset registers */ +#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) +#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) +#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) + +#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) + +/* + * Power up Giga UART driver, turn on HID clock. + * Turn off BT power, since we're not using it and it + * draws power. + */ +#define OMAP1510_FPGA_RESET_VALUE 0x42 + +#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) +#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) +#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) +#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) +#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) +#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) +#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) +#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) + +/* + * Innovator/OMAP1510 FPGA HID register bit definitions + */ +#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ +#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ +#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ +#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ +#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ +#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ +#define OMAP1510_FPGA_HID_rsrvd (1<<6) +#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ + +/* The FPGA IRQ is cascaded through GPIO_13 */ +#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) + +/* IRQ Numbers for interrupts muxed through the FPGA */ +#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) + #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h new file mode 100644 index 000000000000..2ce6a2db470b --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/serial.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#include <linux/init.h> + +/* + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO_OFS 0x3ffc + +/* OMAP1 serial ports */ +#define OMAP1_UART1_BASE 0xfffb0000 +#define OMAP1_UART2_BASE 0xfffb0800 +#define OMAP1_UART3_BASE 0xfffb9800 + +#define OMAP_PORT_SHIFT 2 +#define OMAP7XX_PORT_SHIFT 0 + +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP1UART1 11 +#define OMAP1UART2 12 +#define OMAP1UART3 13 + +#ifndef __ASSEMBLER__ +extern void omap_serial_init(void); +#endif + +#endif diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h new file mode 100644 index 000000000000..6cf9c1cc2bef --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -0,0 +1,229 @@ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +/* These are needed to compile common code */ +#ifdef CONFIG_ARCH_OMAP1 +#define cpu_is_omap242x() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap44xx() 0 +#define soc_is_omap54xx() 0 +#define soc_is_am33xx() 0 +#define cpu_class_is_omap1() 1 +#define cpu_class_is_omap2() 0 +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/mach-omap1/include/mach/tc.h index 1b4b2da86203..1b4b2da86203 100644 --- a/arch/arm/plat-omap/include/plat/tc.h +++ b/arch/arm/mach-omap1/include/mach/tc.h diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index 0ff22dc075c7..ad6fbe7d83f2 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -1,5 +1,122 @@ /* - * arch/arm/mach-omap1/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include <plat/uncompress.h> +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/memory.h> +#include <asm/mach-types.h> + +#include "serial.h" + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP7XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) + +#define DEBUG_LL_OMAP1(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap7xx/8xx based boards using UART1 with shift 0 */ + DEBUG_LL_OMAP7XX(1, herald); + DEBUG_LL_OMAP7XX(1, omap_perseus2); + + /* omap15xx/16xx based boards using UART1 */ + DEBUG_LL_OMAP1(1, ams_delta); + DEBUG_LL_OMAP1(1, nokia770); + DEBUG_LL_OMAP1(1, omap_h2); + DEBUG_LL_OMAP1(1, omap_h3); + DEBUG_LL_OMAP1(1, omap_innovator); + DEBUG_LL_OMAP1(1, omap_osk); + DEBUG_LL_OMAP1(1, omap_palmte); + DEBUG_LL_OMAP1(1, omap_palmz71); + + /* omap15xx/16xx based boards using UART2 */ + DEBUG_LL_OMAP1(2, omap_palmtt); + + /* omap15xx/16xx based boards using UART3 */ + DEBUG_LL_OMAP1(3, sx1); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 6a5baab1f4cb..5a3b80617a11 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -17,8 +17,8 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/tc.h> -#include <plat/dma.h> +#include <mach/tc.h> +#include <plat-omap/dma-omap.h> #include "iomap.h" #include "common.h" @@ -134,7 +134,6 @@ void __init omap1_init_early(void) */ omap1_clk_init(); omap1_mux_init(); - omap_init_consistent_dma_size(); } void __init omap1_init_late(void) diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h index 330c4716b028..f4e2d7a21365 100644 --- a/arch/arm/mach-omap1/iomap.h +++ b/arch/arm/mach-omap1/iomap.h @@ -22,9 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 6995fb6a3345..122ef67939a2 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -45,7 +45,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <plat/cpu.h> +#include "soc.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index ed42628611bc..7ed8c1857d56 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,11 +27,13 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/hardware.h> #include <mach/lcdc.h> +#include "dma.h" + int omap_lcd_dma_running(void) { /* diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index bdc2e7541adb..c6d8fdf92e9c 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,14 +19,15 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/mux.h> -#include <plat/cpu.h> +#include "soc.h" #include <linux/platform_data/asoc-ti-mcbsp.h> #include <mach/irqs.h> #include "iomap.h" +#include "dma.h" #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h new file mode 100644 index 000000000000..39c2b13de884 --- /dev/null +++ b/arch/arm/mach-omap1/mmc.h @@ -0,0 +1,18 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP15XX_NR_MMC 1 +#define OMAP16XX_NR_MMC 2 +#define OMAP1_MMC_SIZE 0x080 +#define OMAP1_MMC1_BASE 0xfffb7800 +#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +#else +static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c index 9cd4ddb51397..8dcebe6d8882 100644 --- a/arch/arm/mach-omap1/opp_data.c +++ b/arch/arm/mach-omap1/opp_data.c @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include <plat/clkdev_omap.h> +#include "clock.h" #include "opp.h" /*------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 47ec16155483..66d663a6ef3a 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -44,23 +44,23 @@ #include <linux/io.h> #include <linux/atomic.h> +#include <asm/fncpy.h> #include <asm/system_misc.h> #include <asm/irq.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> #include <mach/irqs.h> #include "iomap.h" +#include "clock.h" #include "pm.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 7868e75ad077..3f2d39672393 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -19,8 +19,7 @@ #include <linux/clk.h> #include <linux/err.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "soc.h" #ifdef CONFIG_PM_RUNTIME static int omap1_pm_runtime_suspend(struct device *dev) diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index b17709103866..5eebd7e889d0 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -4,12 +4,24 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/prcm.h> - #include <mach/hardware.h> +#include "iomap.h" #include "common.h" +/* ARM_SYSST bit shifts related to SoC reset sources */ +#define ARM_SYSST_POR_SHIFT 5 +#define ARM_SYSST_EXT_RST_SHIFT 4 +#define ARM_SYSST_ARM_WDRST_SHIFT 2 +#define ARM_SYSST_GLOB_SWRST_SHIFT 1 + +/* Standardized reset source bits (across all OMAP SoCs) */ +#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0 +#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1 +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 +#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5 + + void omap1_restart(char mode, const char *cmd) { /* @@ -23,3 +35,28 @@ void omap1_restart(char mode, const char *cmd) omap_writew(1, ARM_RSTCT1); } + +/** + * omap1_get_reset_sources - return the source of the SoC's last reset + * + * Returns bits that represent the last reset source for the SoC. The + * format is standardized across OMAPs for use by the OMAP watchdog. + */ +u32 omap1_get_reset_sources(void) +{ + u32 ret = 0; + u16 rs; + + rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST)); + + if (rs & (1 << ARM_SYSST_POR_SHIFT)) + ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT)) + ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT)) + ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT)) + ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT; + + return ret; +} diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b9d6834af835..d1ac08016f0b 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -23,7 +23,6 @@ #include <asm/mach-types.h> #include <mach/mux.h> -#include <plat/fpga.h> #include "pm.h" diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 0e628743bd03..a908c51839a4 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -36,6 +36,8 @@ #include <asm/assembler.h> +#include <mach/hardware.h> + #include "iomap.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h new file mode 100644 index 000000000000..69daf0187b1d --- /dev/null +++ b/arch/arm/mach-omap1/soc.h @@ -0,0 +1,4 @@ +/* + * We can move mach/soc.h here once the drivers are fixed + */ +#include <mach/soc.h> diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c new file mode 100644 index 000000000000..6431b0f862ce --- /dev/null +++ b/arch/arm/mach-omap1/sram-init.c @@ -0,0 +1,76 @@ +/* + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "sram.h" + +#define OMAP1_SRAM_PA 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_and_map_sram(void) +{ + unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ; + unsigned long omap_sram_start = OMAP1_SRAM_PA; + unsigned long omap_sram_size; + + if (cpu_is_omap7xx()) + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; /* 16K */ + else { + pr_err("Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, 1); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; + _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap_sram_init(void) +{ + omap_detect_and_map_sram(); + _omap_sram_reprogram_clock = + omap_sram_push(omap1_sram_reprogram_clock, + omap1_sram_reprogram_clock_sz); + + return 0; +} diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h new file mode 100644 index 000000000000..d5a6c8362301 --- /dev/null +++ b/arch/arm/mach-omap1/sram.h @@ -0,0 +1,7 @@ +#include <plat/sram.h> + +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index cdeb9d3ef640..bde7a35e5000 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 74529549130c..41152fadd4c0 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -50,7 +50,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <plat/dmtimer.h> +#include <plat/counter-32k.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 84267edd9421..104fed366b8f 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata) #endif -u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) return syscon1 << 16; } -u32 __init omap1_usb1_init(unsigned nwires) +static u32 __init omap1_usb1_init(unsigned nwires) { u32 syscon1 = 0; @@ -475,7 +475,7 @@ bad: return syscon1 << 20; } -u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) { u32 syscon1 = 0; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index d669e227e00c..2265e5826883 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -270,14 +270,14 @@ config MACH_NOKIA_N8X0 select OMAP_PACKAGE_ZAC config MACH_NOKIA_RM680 - bool "Nokia RM-680/696 board" + bool "Nokia N950 (RM-680) / N9 (RM-696) phones" depends on ARCH_OMAP3 default y select MACH_NOKIA_RM696 select OMAP_PACKAGE_CBB config MACH_NOKIA_RX51 - bool "Nokia RX-51 board" + bool "Nokia N900 (RX-51) phone" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fe40d9e488c9..b455ffc12ebe 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,30 +4,37 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o - -# INTCPS IP block support - XXX should be moved to drivers/ -obj-$(CONFIG_ARCH_OMAP2) += irq.o -obj-$(CONFIG_ARCH_OMAP3) += irq.o -obj-$(CONFIG_SOC_AM33XX) += irq.o - -# Secure monitor API support -obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o -obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ + omap_device.o sram.o + +omap-2-3-common = irq.o +hwmod-common = omap_hwmod.o \ + omap_hwmod_common_data.o +clock-common = clock.o clock_common_data.o \ + clkt_dpll.o clkt_clksel.o +secure-common = omap-smc.o omap-secure.o + +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) +obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o endif -obj-$(CONFIG_TWL4030_CORE) += omap_twl.o +obj-$(CONFIG_TWL4030_CORE) += omap_twl.o +obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o -obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o -obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o +omap-4-5-common = omap4-common.o omap-wakeupgen.o \ + sleep44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -43,6 +50,11 @@ AFLAGS_sram242x.o :=-Wa,-march=armv6 AFLAGS_sram243x.o :=-Wa,-march=armv6 AFLAGS_sram34xx.o :=-Wa,-march=armv7-a +# Restart code (OMAP4/5 currently in omap4-common.c) +obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o +obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o +obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o + # Pin multiplexing obj-$(CONFIG_SOC_OMAP2420) += mux2420.o obj-$(CONFIG_SOC_OMAP2430) += mux2430.o @@ -52,7 +64,6 @@ obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o -obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # OPP table initialization ifeq ($(CONFIG_PM_OPP),y) @@ -62,16 +73,18 @@ obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o endif # Power Management +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o + ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o +obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o +obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o -obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o +obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o -obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o +obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) @@ -83,76 +96,82 @@ endif endif ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o endif # PRCM -obj-y += prcm.o prm_common.o -obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o +obj-y += prm_common.o cm_common.o +obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o +obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ - vc44xx_data.o vp44xx_data.o \ - prm44xx.o + vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) # OMAP voltage domains -obj-y += voltage.o vc.o vp.o +voltagedomain-common := voltage.o vc.o vp.o +obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o +obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o +obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common) +obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common) # OMAP powerdomain framework -obj-y += powerdomain.o powerdomain-common.o +powerdomain-common += powerdomain.o powerdomain-common.o +obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o -obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o -obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) # PRCM clockdomain control -obj-y += clockdomain.o -obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o +clockdomain-common += clockdomain.o +obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) # Clock framework -obj-y += clock.o clock_common_data.o \ - clkt_dpll.o clkt_clksel.o -obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o +obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o -obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o +obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o +obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o +obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o -obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) @@ -160,7 +179,6 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o # hwmod data -obj-y += omap_hwmod_common_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o @@ -184,8 +202,6 @@ obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o -obj-$(CONFIG_OMAP_IOMMU) += iommu2.o - iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) @@ -206,10 +222,10 @@ obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o -obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o +obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o -obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o -obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o @@ -279,4 +295,4 @@ endif emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o obj-y += $(emac-m) $(emac-y) -obj-y += common-board-devices.o twl-common.o +obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/am33xx.h b/arch/arm/mach-omap2/am33xx.h index 06c19bb7bca6..43296c1af9ee 100644 --- a/arch/arm/mach-omap2/am33xx.h +++ b/arch/arm/mach-omap2/am33xx.h @@ -21,5 +21,6 @@ #define AM33XX_SCM_BASE 0x44E10000 #define AM33XX_CTRL_BASE AM33XX_SCM_BASE #define AM33XX_PRCM_BASE 0x44E00000 +#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + 0x3FC) #endif /* __ASM_ARCH_AM33XX_H */ diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index d0c54c573d34..af11dcdb7e2c 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/davinci_emac.h> #include <asm/system.h> -#include <plat/omap_device.h> +#include "omap_device.h" #include "am35xx.h" #include "control.h" #include "am35xx-emac.h" diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 95b384d54f8a..4815ea6f8f5d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -28,14 +28,12 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> -#include <plat/usb.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include <video/omapdss.h> @@ -287,5 +285,5 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .init_machine = omap_2430sdp_init, .init_late = omap2430_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 96cd3693e1ae..6601754f9512 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -30,15 +30,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> +#include <plat-omap/dma-omap.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> +#include "gpmc.h" #include "gpmc-smc91x.h" +#include "soc.h" #include "board-flash.h" #include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" @@ -597,5 +597,5 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .init_machine = omap_3430sdp_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index fc224ad86747..050aaa771254 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -18,9 +18,8 @@ #include "common.h" #include "gpmc-smc91x.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h" @@ -213,5 +212,5 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .init_machine = omap_sdp_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 3669c120c7e8..1cc6696594fd 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -27,6 +27,7 @@ #include <linux/leds.h> #include <linux/leds_pwm.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/usb/musb.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> @@ -34,31 +35,23 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> -#include <plat/mmc.h> #include "omap4-keypad.h" -#include <video/omapdss.h> -#include <video/omap-panel-nokia-dsi.h> -#include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> #include "soc.h" #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "dss-common.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ -#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ -#define DLP_POWER_ON_GPIO 40 #define GPIO_WIFI_PMENA 54 #define GPIO_WIFI_IRQ 53 @@ -607,154 +600,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static struct nokia_dsi_panel_data dsi1_panel = { - .name = "taal", - .reset_gpio = 102, - .use_ext_te = false, - .ext_te_gpio = 101, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd_device = { - .name = "lcd", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi1_panel, - .phy.dsi = { - .module = 0, - }, - .channel = OMAP_DSS_CHANNEL_LCD, -}; - -static struct nokia_dsi_panel_data dsi2_panel = { - .name = "taal", - .reset_gpio = 104, - .use_ext_te = false, - .ext_te_gpio = 103, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd2_device = { - .name = "lcd2", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi2_panel, - .phy.dsi = { - - .module = 1, - }, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data sdp4430_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device sdp4430_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &sdp4430_hdmi_data, -}; - -static struct picodlp_panel_data sdp4430_picodlp_pdata = { - .picodlp_adapter_id = 2, - .emu_done_gpio = 44, - .pwrgood_gpio = 45, -}; - -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - -static struct omap_dss_device sdp4430_picodlp_device = { - .name = "picodlp", - .driver_name = "picodlp_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, - .data = &sdp4430_picodlp_pdata, -}; - -static struct omap_dss_device *sdp4430_dss_devices[] = { - &sdp4430_lcd_device, - &sdp4430_lcd2_device, - &sdp4430_hdmi_device, - &sdp4430_picodlp_device, -}; - -static struct omap_dss_board_info sdp4430_dss_data = { - .num_devices = ARRAY_SIZE(sdp4430_dss_devices), - .devices = sdp4430_dss_devices, - .default_device = &sdp4430_lcd_device, -}; - -static void __init omap_4430sdp_display_init(void) -{ - int r; - - /* Enable LCD2 by default (instead of Pico DLP) */ - r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, - "display_sel"); - if (r) - pr_err("%s: Could not get display_sel GPIO\n", __func__); - - sdp4430_picodlp_init(); - omap_display_init(&sdp4430_dss_data); - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -881,5 +726,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .init_machine = omap_4430sdp_init, .init_late = omap4430_init_late, .timer = &omap4_timer, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 318feadb1d6e..51b96a1206d1 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include "am35xx-emac.h" #include "mux.h" @@ -94,5 +93,5 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .init_machine = am3517_crane_init, .init_late = am35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index e16289755f2e..4be58fd071f6 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -25,6 +25,7 @@ #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> #include <linux/mmc/host.h> +#include <linux/usb/musb.h> #include <linux/platform_data/gpio-omap.h> #include "am35xx.h" @@ -33,7 +34,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> @@ -393,5 +393,5 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .init_machine = am3517_evm_init, .init_late = am35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index cea3abace815..5d0a61f54165 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -28,14 +28,14 @@ #include <linux/clk.h> #include <linux/smc91x.h> #include <linux/gpio.h> +#include <linux/platform_data/leds-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <plat/led.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -338,5 +338,5 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .init_machine = omap_apollon_init, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 376d26eb601c..c8e37dc00892 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -38,21 +38,19 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> - +#include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-nand.h" #define CM_T35_GPIO_PENDOWN 57 #define SB_T35_USB_HUB_RESET_GPIO 167 @@ -181,7 +179,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = { static void __init cm_t35_init_nand(void) { - if (gpmc_nand_init(&cm_t35_nand_data) < 0) + if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) pr_err("CM-T35: Unable to register NAND device\n"); } #else @@ -753,18 +751,18 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_machine = cm_t35_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(CM_T3730, "Compulab CM-T3730") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap3_init_irq, .handle_irq = omap3_intc_handle_irq, - .init_machine = cm_t3730_init, + .init_machine = cm_t3730_init, .init_late = omap3630_init_late, - .timer = &omap3_timer, - .restart = omap_prcm_restart, + .timer = &omap3_timer, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 59c0a45f75b0..ebbc2adb499e 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -39,9 +39,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "am35xx.h" @@ -49,6 +48,7 @@ #include "control.h" #include "common-board-devices.h" #include "am35xx-emac.h" +#include "gpmc-nand.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -240,7 +240,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = { static void __init cm_t3517_init_nand(void) { - if (gpmc_nand_init(&cm_t3517_nand_data) < 0) + if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0) pr_err("CM-T3517: NAND initialization failed\n"); } #else @@ -297,6 +297,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .timer = &omap3_timer, - .restart = omap_prcm_restart, + .timer = &omap3_gp_timer, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1fd161e934c7..7667eb749522 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -39,9 +39,8 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> @@ -55,8 +54,11 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 @@ -621,8 +623,9 @@ static void __init devkit8000_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions)); + board_nand_init(devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure SDRC pins are mux'd for self-refresh */ @@ -640,5 +643,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .init_machine = devkit8000_init, .init_late = omap35xx_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e642acf9cad0..c33adea0247c 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -17,14 +17,14 @@ #include <linux/mtd/physmap.h> #include <linux/io.h> -#include <plat/cpu.h> -#include <plat/gpmc.h> #include <linux/platform_data/mtd-nand-omap2.h> #include <linux/platform_data/mtd-onenand-omap2.h> -#include <plat/tc.h> +#include "soc.h" #include "common.h" #include "board-flash.h" +#include "gpmc-onenand.h" +#include "gpmc-nand.h" #define REG_FPGA_REV 0x10 #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 @@ -104,36 +104,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, defined(CONFIG_MTD_NAND_OMAP2_MODULE) /* Note that all values in this struct are in nanoseconds */ -static struct gpmc_timings nand_timings = { +struct gpmc_timings nand_default_timings[1] = { + { + .sync_clk = 0, - .sync_clk = 0, + .cs_on = 0, + .cs_rd_off = 36, + .cs_wr_off = 36, - .cs_on = 0, - .cs_rd_off = 36, - .cs_wr_off = 36, + .adv_on = 6, + .adv_rd_off = 24, + .adv_wr_off = 36, - .adv_on = 6, - .adv_rd_off = 24, - .adv_wr_off = 36, + .we_off = 30, + .oe_off = 48, - .we_off = 30, - .oe_off = 48, + .access = 54, + .rd_cycle = 72, + .wr_cycle = 72, - .access = 54, - .rd_cycle = 72, - .wr_cycle = 72, - - .wr_access = 30, - .wr_data_mux_bus = 0, + .wr_access = 30, + .wr_data_mux_bus = 0, + }, }; -static struct omap_nand_platform_data board_nand_data = { - .gpmc_t = &nand_timings, -}; +static struct omap_nand_platform_data board_nand_data; void -__init board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) +__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, + int nand_type, struct gpmc_timings *gpmc_t) { board_nand_data.cs = cs; board_nand_data.parts = nand_parts; @@ -141,7 +140,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.devsize = nand_type; board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; - gpmc_nand_init(&board_nand_data); + gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ @@ -238,5 +237,6 @@ void __init board_flash_init(struct flash_partitions partition_info[], pr_err("NAND: Unable to find configuration in GPMC\n"); else board_nand_init(partition_info[2].parts, - partition_info[2].nr_parts, nandcs, nand_type); + partition_info[2].nr_parts, nandcs, + nand_type, nand_default_timings); } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index c44b70d52021..2fb5d41a9fae 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -12,7 +12,7 @@ */ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <plat/gpmc.h> +#include "gpmc.h" #define PDC_NOR 1 #define PDC_NAND 2 @@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[], #if defined(CONFIG_MTD_NAND_OMAP2) || \ defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type); + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t); +extern struct gpmc_timings nand_default_timings[]; #else static inline void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t) { } +#define nand_default_timings NULL #endif #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 601ecdfb1cf9..53cb380b7877 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -21,6 +21,7 @@ #include "common.h" #include "common-board-devices.h" +#include "dss-common.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) #define intc_of_init NULL @@ -40,6 +41,15 @@ static void __init omap_generic_init(void) omap_sdrc_init(NULL, NULL); of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); + + /* + * HACK: call display setup code for selected boards to enable omapdss. + * This will be removed when omapdss supports DT. + */ + if (of_machine_is_compatible("ti,omap4-panda")) + omap4_panda_display_init_of(); + else if (of_machine_is_compatible("ti,omap4-sdp")) + omap_4430sdp_display_init_of(); } #ifdef CONFIG_SOC_OMAP2420 @@ -57,7 +67,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END #endif @@ -76,7 +86,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap243x_boards_compat, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END #endif @@ -95,7 +105,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, +MACHINE_END + +static const char *omap3_gp_boards_compat[] __initdata = { + "ti,omap3-beagle", + NULL, +}; + +DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_secure_timer, + .dt_compat = omap3_gp_boards_compat, + .restart = omap3xxx_restart, MACHINE_END #endif @@ -134,7 +161,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_late = omap4430_init_late, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END #endif @@ -154,6 +181,6 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap5_timer, .dt_compat = omap5_boards_compat, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 8d04bf851af4..b626dbe6f7bc 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -26,15 +26,14 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/input/matrix_keypad.h> +#include <linux/mfd/menelaus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/menelaus.h> -#include <plat/dma.h> -#include <plat/gpmc.h> -#include "debug-devices.h" +#include <plat-omap/dma-omap.h> +#include <plat/debug-devices.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -42,6 +41,7 @@ #include "common.h" #include "mux.h" #include "control.h" +#include "gpmc.h" #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 @@ -386,5 +386,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .init_machine = omap_h4_init, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 378590694447..0f24cb84ba5a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -29,20 +29,19 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include "common.h" -#include <plat/gpmc.h> -#include <plat/usb.h> - #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include "common.h" +#include "gpmc.h" #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" #include "common-board-devices.h" #include "board-flash.h" #include "control.h" +#include "gpmc-onenand.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -175,7 +174,7 @@ static void __init igep_flash_init(void) pr_info("IGEP: initializing NAND memory device\n"); board_nand_init(igep_flash_partitions, ARRAY_SIZE(igep_flash_partitions), - 0, NAND_BUSWIDTH_16); + 0, NAND_BUSWIDTH_16, nand_default_timings); } else if (mux == IGEP_SYSBOOT_ONENAND) { pr_info("IGEP: initializing OneNAND memory device\n"); board_onenand_init(igep_flash_partitions, @@ -657,7 +656,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .init_machine = igep_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -670,5 +669,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .init_machine = igep_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ee8c3cfb95b3..0869f4f3d3e1 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -35,9 +35,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> -#include <mach/board-zoom.h> -#include <plat/usb.h> +#include "board-zoom.h" +#include "gpmc.h" #include "gpmc-smsc911x.h" #include <video/omapdss.h> @@ -420,8 +419,8 @@ static void __init omap_ldp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); usb_musb_init(NULL); - board_nand_init(ldp_nand_partitions, - ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); + board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), + ZOOM_NAND_CS, 0, nand_default_timings); omap_hsmmc_init(mmc); ldp_display_init(); @@ -437,5 +436,5 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .init_machine = omap_ldp_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index d95f727ca39a..a4e167c55c1d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -22,16 +22,17 @@ #include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/mfd/menelaus.h> #include <sound/tlv320aic3x.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include "common.h" -#include <plat/menelaus.h> -#include <plat/mmc.h> +#include "mmc.h" #include "mux.h" +#include "gpmc-onenand.h" #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 @@ -689,7 +690,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") @@ -702,7 +703,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") @@ -715,5 +716,5 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index d41ab98890ff..22c483d5dfa8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -39,19 +39,22 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> -#include <plat/omap_device.h> +#include "common.h" +#include "omap_device.h" +#include "gpmc.h" +#include "soc.h" #include "mux.h" #include "hsmmc.h" #include "pm.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -518,8 +521,9 @@ static void __init omap3_beagle_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, - ARRAY_SIZE(omap3beagle_nand_partitions)); + board_nand_init(omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure msecure is mux'd to be able to set the RTC. */ @@ -541,5 +545,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .init_machine = omap3_beagle_init, .init_late = omap3_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b9b776b6c954..54647d6286b4 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -32,6 +32,7 @@ #include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> #include <linux/usb/otg.h> +#include <linux/usb/musb.h> #include <linux/usb/nop-usb-xceiv.h> #include <linux/smsc911x.h> @@ -45,17 +46,20 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> +#include "soc.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "board-flash.h" + +#define NAND_CS 0 #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -731,8 +735,9 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, - ARRAY_SIZE(omap3evm_nand_partitions)); + board_nand_init(omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); @@ -752,5 +757,5 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .init_machine = omap3_evm_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 7bd8253b5d1d..2a065ba6eb58 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -34,16 +34,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "gpmc-smsc911x.h" -#include <plat/gpmc.h> -#include <plat/sdrc.h> -#include <plat/usb.h> - #include "common.h" #include "mux.h" #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-smsc911x.h" #define OMAP3LOGIC_SMSC911X_CS 1 @@ -235,7 +232,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") @@ -248,5 +245,5 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 00a1f4ae6e44..a53a6683c1b8 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -42,7 +42,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <video/omapdss.h> #include <linux/platform_data/mtd-nand-omap2.h> @@ -50,6 +49,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc-nand.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -602,7 +602,7 @@ static void __init omap3pandora_init(void) omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); usb_musb_init(NULL); - gpmc_nand_init(&pandora_nand_data); + gpmc_nand_init(&pandora_nand_data, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); @@ -619,5 +619,5 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .init_machine = omap3pandora_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 731235eb319e..d8638b3b4f94 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -40,9 +40,8 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> @@ -428,5 +427,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .init_machine = omap3_stalker_init, .init_late = omap35xx_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 944ffc436577..263cb9cfbf37 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -44,12 +44,12 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" #include <asm/setup.h> @@ -59,6 +59,8 @@ #define TB_BL_PWM_TIMER 9 #define TB_KILL_POWER_GPIO 168 +#define NAND_CS 0 + static unsigned long touchbook_revision; static struct mtd_partition omap3touchbook_nand_partitions[] = { @@ -365,8 +367,9 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, - ARRAY_SIZE(omap3touchbook_nand_partitions)); + board_nand_init(omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); @@ -384,5 +387,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .init_machine = omap3_touchbook_init, .init_late = omap3430_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index bfcd397e233c..5c8e9cee2c2e 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -29,6 +29,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/ti_wilink_st.h> +#include <linux/usb/musb.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -36,26 +37,20 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <video/omapdss.h> #include "common.h" -#include <plat/usb.h> -#include <plat/mmc.h> -#include <video/omap-panel-tfp410.h> - #include "soc.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" #include "common-board-devices.h" +#include "dss-common.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static struct ti_st_plat_data wilink_platform_data = { @@ -409,68 +404,6 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -/* Display DVI */ -#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 - -/* Using generic display panel */ -static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, -}; - -static struct omap_dss_device omap4_panda_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &omap4_dvi_panel, - .phy.dpi.data_lines = 24, - .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device omap4_panda_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &omap4_panda_hdmi_data, -}; - -static struct omap_dss_device *omap4_panda_dss_devices[] = { - &omap4_panda_dvi_device, - &omap4_panda_hdmi_device, -}; - -static struct omap_dss_board_info omap4_panda_dss_data = { - .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), - .devices = omap4_panda_dss_devices, - .default_device = &omap4_panda_dvi_device, -}; - -static void __init omap4_panda_display_init(void) -{ - - omap_display_init(&omap4_panda_dss_data); - - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} static void omap4_panda_init_rev(void) { @@ -524,5 +457,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .init_machine = omap4_panda_init, .init_late = omap4430_init_late, .timer = &omap4_timer, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b700685762b5..c8fde3e56441 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -45,18 +45,20 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> -#include <plat/usb.h> +#include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" +#include "gpmc.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 #define OVERO_GPIO_PENDOWN 114 @@ -495,8 +497,8 @@ static void __init overo_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_nand_flash_init(0, overo_nand_partitions, - ARRAY_SIZE(overo_nand_partitions)); + board_nand_init(overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); @@ -550,5 +552,5 @@ MACHINE_START(OVERO, "Gumstix Overo") .init_machine = overo_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 45997bfbcbd2..0c777b75e484 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -1,5 +1,5 @@ /* - * Board support file for Nokia RM-680/696. + * Board support file for Nokia N950 (RM-680) / N9 (RM-696). * * Copyright (C) 2010 Nokia * @@ -22,17 +22,14 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <plat/i2c.h> -#include <plat/mmc.h> -#include <plat/usb.h> -#include <plat/gpmc.h> #include "common.h" -#include <plat/serial.h> - #include "mux.h" +#include "gpmc.h" +#include "mmc.h" #include "hsmmc.h" #include "sdram-nokia.h" #include "common-board-devices.h" +#include "gpmc-onenand.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), @@ -151,7 +148,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .init_machine = rm680_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") @@ -164,5 +161,5 @@ MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") .init_machine = rm680_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 020e03c95bfe..07005fe40a2a 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -31,9 +31,7 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> -#include <plat/omap-pm.h> +#include <plat-omap/dma-omap.h> #include "gpmc-smc91x.h" #include "board-rx51.h" @@ -52,8 +50,11 @@ #endif #include "mux.h" +#include "omap-pm.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-onenand.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 7bbb05d9689b..b67fe11d0d94 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap2/board-rx51.c + * Board support file for Nokia N900 (aka RX-51). * * Copyright (C) 2007, 2008 Nokia * @@ -17,18 +17,18 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> -#include <plat/usb.h> +#include <plat-omap/dma-omap.h> +#include "common.h" #include "mux.h" +#include "gpmc.h" #include "pm.h" #include "sdram-nokia.h" @@ -127,5 +127,5 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .init_machine = rx51_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index c4f8833b4c3c..1a3e056d63a7 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -14,13 +14,14 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/usb/musb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> static struct omap_musb_board_data musb_board_data = { .set_phy_power = ti81xx_musb_phy_power, @@ -45,7 +46,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") .timer = &omap3_timer, .init_machine = ti81xx_evm_init, .init_late = ti81xx_init_late, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END MACHINE_START(TI8148EVM, "ti8148evm") @@ -57,5 +58,5 @@ MACHINE_START(TI8148EVM, "ti8148evm") .timer = &omap3_timer, .init_machine = ti81xx_evm_init, .init_late = ti81xx_init_late, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index afb2278a29f6..42e5f231a799 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -17,10 +17,10 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "soc.h" #include "common.h" diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index b940ab2259fb..1c7c834a5b5f 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -16,8 +16,9 @@ #include <linux/spi/spi.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" +#include "soc.h" #include "common.h" #define LCD_PANEL_RESET_GPIO_PROD 96 diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index c166fe1fdff9..26e07addc9d7 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -26,9 +26,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "mux.h" #include "hsmmc.h" diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4994438e1f46..d7fa31e67238 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -22,9 +22,8 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h" @@ -113,8 +112,9 @@ static void __init omap_zoom_init(void) usbhs_init(&usbhs_bdata); } - board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), - ZOOM_NAND_CS, NAND_BUSWIDTH_16); + board_nand_init(zoom_nand_partitions, + ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS, + NAND_BUSWIDTH_16, nand_default_timings); zoom_debugboard_init(); zoom_peripherals_init(); @@ -138,7 +138,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .init_machine = omap_zoom_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") @@ -151,5 +151,5 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .init_machine = omap_zoom_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h index 2e9486940ead..2e9486940ead 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/board-zoom.h diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index c2d15212d64d..8c5b13e7ee61 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -21,12 +21,10 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/prcm.h> #include "clock.h" #include "clock2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ @@ -38,44 +36,16 @@ #define APLLS_CLKIN_13MHZ 2 #define APLLS_CLKIN_12MHZ 3 -void __iomem *cm_idlest_pll; - /* Private functions */ -/* Enable an APLL if off */ -static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) -{ - u32 cval, apll_mask; - - apll_mask = EN_APLL_LOCKED << clk->enable_bit; - - cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - - if ((cval & apll_mask) == apll_mask) - return 0; /* apll already enabled */ - - cval &= ~apll_mask; - cval |= apll_mask; - omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); - - omap2_cm_wait_idlest(cm_idlest_pll, status_mask, - OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk)); - - /* - * REVISIT: Should we return an error code if omap2_wait_clock_ready() - * fails? - */ - return 0; -} - -static int omap2_clk_apll96_enable(struct clk *clk) +static int _apll96_enable(struct clk *clk) { - return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK); + return omap2xxx_cm_apll96_enable(); } -static int omap2_clk_apll54_enable(struct clk *clk) +static int _apll54_enable(struct clk *clk) { - return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK); + return omap2xxx_cm_apll54_enable(); } static void _apll96_allow_idle(struct clk *clk) @@ -98,28 +68,28 @@ static void _apll54_deny_idle(struct clk *clk) omap2xxx_cm_set_apll54_disable_autoidle(); } -/* Stop APLL */ -static void omap2_clk_apll_disable(struct clk *clk) +static void _apll96_disable(struct clk *clk) { - u32 cval; + omap2xxx_cm_apll96_disable(); +} - cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - cval &= ~(EN_APLL_LOCKED << clk->enable_bit); - omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); +static void _apll54_disable(struct clk *clk) +{ + omap2xxx_cm_apll54_disable(); } /* Public data */ const struct clkops clkops_apll96 = { - .enable = omap2_clk_apll96_enable, - .disable = omap2_clk_apll_disable, + .enable = _apll96_enable, + .disable = _apll96_disable, .allow_idle = _apll96_allow_idle, .deny_idle = _apll96_deny_idle, }; const struct clkops clkops_apll54 = { - .enable = omap2_clk_apll54_enable, - .disable = omap2_clk_apll_disable, + .enable = _apll54_enable, + .disable = _apll54_disable, .allow_idle = _apll54_allow_idle, .deny_idle = _apll54_deny_idle, }; diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c index 1502a7bc20bb..399534c7843b 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpll.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpll.c @@ -14,10 +14,8 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" /* Private functions */ diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 4ae439222085..825e44cdf1cf 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -25,21 +25,25 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "sram.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ +/* + * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx + * (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set + * during dpll_ck init and used later by omap2xxx_clk_get_core_rate(). + */ +static struct clk *dpll_core_ck; + /** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate - * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") * * Returns the CORE_CLK rate. CORE_CLK can have one of three rate * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz @@ -47,12 +51,14 @@ * struct clk *dpll_ck, which is a composite clock of dpll_ck and * core_ck. */ -unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) +unsigned long omap2xxx_clk_get_core_rate(void) { long long core_clk; u32 v; - core_clk = omap2_get_dpll_rate(clk); + WARN_ON(!dpll_core_ck); + + core_clk = omap2_get_dpll_rate(dpll_core_ck); v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); v &= OMAP24XX_CORE_CLK_SRC_MASK; @@ -100,7 +106,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate) unsigned long omap2_dpllcore_recalc(struct clk *clk) { - return omap2xxx_clk_get_core_rate(clk); + return omap2xxx_clk_get_core_rate(); } int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) @@ -110,7 +116,7 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) struct prcm_config tmpset; const struct dpll_data *dd; - cur_rate = omap2xxx_clk_get_core_rate(dclk); + cur_rate = omap2xxx_clk_get_core_rate(); mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); mult &= OMAP24XX_CORE_CLK_SRC_MASK; @@ -171,3 +177,19 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) return 0; } +/** + * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck + * @clk: struct clk *dpll_ck + * + * Store a local copy of @clk in dpll_core_ck so other code can query + * the core rate without having to clk_get(), which can sleep. Must + * only be called once. No return value. XXX If the clock + * registration process is ever changed such that dpll_ck is no longer + * statically defined, this code may need to change to increment some + * kind of use count on dpll_ck. + */ +void omap2xxx_clkt_dpllcore_init(struct clk *clk) +{ + WARN(dpll_core_ck, "dpll_core_ck already set - should never happen"); + dpll_core_ck = clk; +} diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c index c3460928b5e0..e1777371bb5e 100644 --- a/arch/arm/mach-omap2/clkt2xxx_osc.c +++ b/arch/arm/mach-omap2/clkt2xxx_osc.c @@ -23,8 +23,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock2xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c index 8693cfdac49a..46683b3c2461 100644 --- a/arch/arm/mach-omap2/clkt2xxx_sys.c +++ b/arch/arm/mach-omap2/clkt2xxx_sys.c @@ -22,8 +22,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock2xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3524f0e7b6d5..1c2041fbd718 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -1,7 +1,7 @@ /* * OMAP2xxx DVFS virtual clock functions * - * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2010 Nokia Corporation * * Contacts: @@ -33,20 +33,25 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "sram.h" const struct prcm_config *curr_prcm_set; const struct prcm_config *rate_table; +/* + * sys_ck_rate: the rate of the external high-frequency clock + * oscillator on the board. Set by the SoC-specific clock init code. + * Once set during a boot, will not change. + */ +static unsigned long sys_ck_rate; + /** * omap2_table_mpu_recalc - just return the MPU speed * @clk: virt_prcm_set struct clk @@ -68,15 +73,14 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk) long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) { const struct prcm_config *ptr; - long highest_rate, sys_clk_rate; + long highest_rate; highest_rate = -EINVAL; - sys_clk_rate = __clk_get_rate(sclk); for (ptr = rate_table; ptr->mpu_speed; ptr++) { if (!(ptr->flags & cpu_mask)) continue; - if (ptr->xtal_speed != sys_clk_rate) + if (ptr->xtal_speed != sys_ck_rate) continue; highest_rate = ptr->mpu_speed; @@ -95,15 +99,12 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; - long sys_clk_rate; - - sys_clk_rate = __clk_get_rate(sclk); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_clk_rate) + if (prcm->xtal_speed != sys_ck_rate) continue; if (prcm->mpu_speed <= rate) { @@ -119,7 +120,7 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) } curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(dclk); + cur_rate = omap2xxx_clk_get_core_rate(); if (prcm->dpll_speed == cur_rate / 2) { omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); @@ -169,3 +170,50 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } + +/** + * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate + * table sets matches the current CORE DPLL hardware rate + * + * Check the MPU rate set by bootloader. Sets the 'curr_prcm_set' + * global to point to the active rate set when found; otherwise, sets + * it to NULL. No return value; + */ +void omap2xxx_clkt_vps_check_bootloader_rates(void) +{ + const struct prcm_config *prcm = NULL; + unsigned long rate; + + rate = omap2xxx_clk_get_core_rate(); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck_rate) + continue; + if (prcm->dpll_speed <= rate) + break; + } + curr_prcm_set = prcm; +} + +/** + * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate + * + * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS + * code. (The sys_ck rate does not -- or rather, must not -- change + * during kernel runtime.) Must be called after we have a valid + * sys_ck rate, but before the virt_prcm_set clock rate is + * recalculated. No return value. + */ +void omap2xxx_clkt_vps_late_init(void) +{ + struct clk *c; + + c = clk_get(NULL, "sys_ck"); + if (IS_ERR(c)) { + WARN(1, "could not locate sys_ck\n"); + } else { + sys_ck_rate = clk_get_rate(c); + clk_put(c); + } +} diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index 7c6da2f731dc..6cf298e262f6 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -21,14 +21,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "clock.h" #include "clock3xxx.h" #include "clock34xx.h" #include "sdrc.h" +#include "sram.h" #define CYCLES_PER_MHZ 1000000 diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index 3ff22114d702..53646facda45 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -45,8 +45,6 @@ #include <linux/io.h> #include <linux/bug.h> -#include <plat/clock.h> - #include "clock.h" /* Private functions */ diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 80411142f482..8463cc356245 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -21,8 +21,6 @@ #include <asm/div64.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c index 3d43fba2542f..fe774a09dd0c 100644 --- a/arch/arm/mach-omap2/clkt_iclk.c +++ b/arch/arm/mach-omap2/clkt_iclk.c @@ -14,8 +14,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/prcm.h> #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 961ac8f7e13d..e381d991092c 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -15,6 +15,7 @@ #undef DEBUG #include <linux/kernel.h> +#include <linux/export.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -25,17 +26,24 @@ #include <asm/cpu.h> -#include <plat/clock.h> -#include <plat/prcm.h> #include <trace/events/power.h> #include "soc.h" #include "clockdomain.h" #include "clock.h" -#include "cm2xxx_3xxx.h" +#include "cm.h" +#include "cm2xxx.h" +#include "cm3xxx.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" +#include "common.h" + +/* + * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait + * for a module to indicate that it is no longer in idle + */ +#define MAX_MODULE_ENABLE_WAIT 100000 u16 cpu_mask; @@ -47,12 +55,50 @@ u16 cpu_mask; */ static bool clkdm_control = true; +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + /* * OMAP2+ specific clock functions */ /* Private functions */ + +/** + * _wait_idlest_generic - wait for a module to leave the idle state + * @reg: virtual address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @idlest: idle state indicator (0 or 1) for the clock + * @name: name of the clock (for printk) + * + * Wait for a module to leave idle, where its idle-status register is + * not inside the CM module. Returns 1 if the module left idle + * promptly, or 0 if the module did not leave idle before the timeout + * elapsed. XXX Deprecated - should be moved into drivers for the + * individual IP block that the IDLEST register exists in. + */ +static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest, + const char *name) +{ + int i = 0, ena = 0; + + ena = (idlest) ? 0 : mask; + + omap_test_timeout(((__raw_readl(reg) & mask) == ena), + MAX_MODULE_ENABLE_WAIT, i); + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("omap clock: module associated with clock %s ready after %d loops\n", + name, i); + else + pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", + name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +}; + /** * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE * @clk: struct clk * belonging to the module @@ -66,7 +112,9 @@ static bool clkdm_control = true; static void _omap2_module_wait_ready(struct clk *clk) { void __iomem *companion_reg, *idlest_reg; - u8 other_bit, idlest_bit, idlest_val; + u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; + s16 prcm_mod; + int r; /* Not all modules have multiple clocks that their IDLEST depends on */ if (clk->ops->find_companion) { @@ -77,8 +125,14 @@ static void _omap2_module_wait_ready(struct clk *clk) clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); - omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val, - __clk_get_name(clk)); + r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id); + if (r) { + /* IDLEST register not in the CM module */ + _wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val, + clk->name); + } else { + cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit); + }; } /* Public functions */ @@ -512,12 +566,510 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, /* Common data */ -struct clk_functions omap2_clk_functions = { - .clk_enable = omap2_clk_enable, - .clk_disable = omap2_clk_disable, - .clk_round_rate = omap2_clk_round_rate, - .clk_set_rate = omap2_clk_set_rate, - .clk_set_parent = omap2_clk_set_parent, - .clk_disable_unused = omap2_clk_disable_unused, +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + pr_err("Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + + omap2_clk_disable(clk); + +out: + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * Optional clock functions defined in include/linux/clk.h + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_set_rate(clk, rate); + if (ret == 0) + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + ret = omap2_clk_set_parent(clk, parent); + if (ret == 0) + propagate_rate(clk); + } else { + ret = -EBUSY; + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * OMAP specific clock functions shared between omap1 and omap2 + */ + +int __initdata mpurate; + +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) +{ + get_option(&str, &mpurate); + + if (!mpurate) + return 1; + + if (mpurate < 1000) + mpurate *= 1000000; + + return 1; +} +__setup("mpurate=", omap_clk_setup); + +/* Used for clocks that always have same value as the parent clock */ +unsigned long followparent_recalc(struct clk *clk) +{ + return clk->parent->rate; +} + +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +unsigned long omap_fixed_divisor_recalc(struct clk *clk) +{ + WARN_ON(!clk->fixed_div); + + return clk->parent->rate / clk->fixed_div; +} + +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + +/* Propagate rate to children */ +void propagate_rate(struct clk *tclk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +static LIST_HEAD(root_clks); + +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + + list_add(&clk->node, &clocks); + if (clk->init) + clk->init(clk); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->sibling); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); +} + +/** + * omap_clk_get_by_name - locate OMAP struct clk by its name + * @name: name of the struct clk to locate + * + * Locate an OMAP struct clk by its name. Assumes that struct clk + * names are unique. Returns NULL if not found or a pointer to the + * struct clk if found. + */ +struct clk *omap_clk_get_by_name(const char *name) +{ + struct clk *c; + struct clk *ret = NULL; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(c, &clocks, node) { + if (!strcmp(c->name, name)) { + ret = c; + break; + } + } + + mutex_unlock(&clocks_mutex); + + return ret; +} + +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + +/* + * Dummy clock + * + * Used for clock aliases that are needed on some OMAPs, but not others + */ +struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_null, +}; + +/* + * + */ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); + list_for_each_entry(ck, &clocks, node) { + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || !ck->enable_reg) + continue; + + omap2_clk_disable_unused(ck); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) +/* + * debugfs support to trace clock tree hierarchy and attributes + */ + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static struct dentry *clk_debugfs_root; + +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + mutex_lock(&clocks_mutex); + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, + c->usecount); + } + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, }; +static int clk_debugfs_register_one(struct clk *c) +{ + int err; + struct dentry *d; + struct clk *pa = c->parent; + + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); + if (!d) + return -ENOMEM; + c->dent = d; + + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + if (!d) { + err = -ENOMEM; + goto err_out; + } + return 0; + +err_out: + debugfs_remove_recursive(c->dent); + return err; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent; + + if (pa && !pa->dent) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (!c->dent) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clocks, node) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} +late_initcall(clk_debugfs_init); + +#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ + diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 35ec5f3d9a73..ff9789bc0fd1 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -17,8 +17,323 @@ #define __ARCH_ARM_MACH_OMAP2_CLOCK_H #include <linux/kernel.h> +#include <linux/list.h> + +#include <linux/clkdev.h> + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_242X (1 << 0) +#define CK_243X (1 << 1) /* 243x, 253x */ +#define CK_3430ES1 (1 << 2) /* 34xxES1 only */ +#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */ +#define CK_AM35XX (1 << 4) /* Sitara AM35xx */ +#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */ +#define CK_443X (1 << 6) +#define CK_TI816X (1 << 7) +#define CK_446X (1 << 8) +#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */ + + +#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) +#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) + +struct module; +struct clk; +struct clockdomain; + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* struct clksel_rate.flags possibilities */ +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) +#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ +#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ +#define RATE_IN_36XX (1 << 4) +#define RATE_IN_4430 (1 << 5) +#define RATE_IN_TI816X (1 << 6) +#define RATE_IN_4460 (1 << 7) +#define RATE_IN_AM33XX (1 << 8) +#define RATE_IN_TI814X (1 << 9) + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) +#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) +#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) +#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) + +/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ +#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) + + +/** + * struct clksel_rate - register bitfield values corresponding to clk divisors + * @val: register bitfield value (shifted to bit 0) + * @div: clock divisor corresponding to @val + * @flags: (see "struct clksel_rate.flags possibilities" above) + * + * @val should match the value of a read from struct clk.clksel_reg + * AND'ed with struct clk.clksel_mask, shifted right to bit 0. + * + * @div is the divisor that should be applied to the parent clock's rate + * to produce the current clock's rate. + */ +struct clksel_rate { + u32 val; + u8 div; + u16 flags; +}; + +/** + * struct clksel - available parent clocks, and a pointer to their divisors + * @parent: struct clk * to a possible parent clock + * @rates: available divisors for this parent clock + * + * A struct clksel is always associated with one or more struct clks + * and one or more struct clksel_rates. + */ +struct clksel { + struct clk *parent; + const struct clksel_rate *rates; +}; + +/** + * struct dpll_data - DPLL registers and integration data + * @mult_div1_reg: register containing the DPLL M and N bitfields + * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg + * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg + * @clk_bypass: struct clk pointer to the clock's bypass clock input + * @clk_ref: struct clk pointer to the clock's reference clock input + * @control_reg: register containing the DPLL mode bitfield + * @enable_mask: mask of the DPLL mode bitfield in @control_reg + * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() + * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @max_multiplier: maximum valid non-bypass multiplier value (actual) + * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() + * @min_divider: minimum valid non-bypass divider value (actual) + * @max_divider: maximum valid non-bypass divider value (actual) + * @modes: possible values of @enable_mask + * @autoidle_reg: register containing the DPLL autoidle mode bitfield + * @idlest_reg: register containing the DPLL idle status bitfield + * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg + * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg + * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs + * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs + * @flags: DPLL type/features (see below) + * + * Possible values for @flags: + * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) + * + * @freqsel_mask is only used on the OMAP34xx family and AM35xx. + * + * XXX Some DPLLs have multiple bypass inputs, so it's not technically + * correct to only have one @clk_bypass pointer. + * + * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, + * @last_rounded_n) should be separated from the runtime-fixed fields + * and placed into a different structure, so that the runtime-fixed data + * can be placed into read-only space. + */ +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned long last_rounded_rate; + u16 last_rounded_m; + u16 max_multiplier; + u8 last_rounded_n; + u8 min_divider; + u16 max_divider; + u8 modes; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; + u32 dco_mask; + u32 sddiv_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; + u8 flags; +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; -#include <plat/clock.h> /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */ #define CORE_CLK_SRC_32K 0x0 @@ -94,33 +409,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk *clk); u32 omap2_get_dpll_rate(struct clk *clk); void omap2_init_dpll_parent(struct clk *clk); -int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); - - -#ifdef CONFIG_ARCH_OMAP2 -void omap2xxx_clk_prepare_for_reboot(void); -#else -static inline void omap2xxx_clk_prepare_for_reboot(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 -void omap3_clk_prepare_for_reboot(void); -#else -static inline void omap3_clk_prepare_for_reboot(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP4 -void omap4_clk_prepare_for_reboot(void); -#else -static inline void omap4_clk_prepare_for_reboot(void) -{ -} -#endif - int omap2_dflt_clk_enable(struct clk *clk); void omap2_dflt_clk_disable(struct clk *clk); void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, @@ -139,7 +427,6 @@ extern const struct clkops clkops_dummy; extern const struct clkops clkops_omap2_dflt; extern struct clk_functions omap2_clk_functions; -extern struct clk *vclk, *sclk; extern const struct clksel_rate gpt_32k_rates[]; extern const struct clksel_rate gpt_sys_rates[]; diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index c3cde1a2b6de..608874b651e8 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1,7 +1,7 @@ /* * OMAP2420 clock data * - * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2011 Nokia Corporation * * Contacts: @@ -18,14 +18,12 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" @@ -126,6 +124,7 @@ static struct clk dpll_ck = { .name = "dpll_ck", .ops = &clkops_omap2xxx_dpll_ops, .parent = &sys_ck, /* Can be func_32k also */ + .init = &omap2xxx_clkt_dpllcore_init, .dpll_data = &dpll_dd, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, @@ -1926,17 +1925,12 @@ static struct omap_clk omap2420_clks[] = { int __init omap2420_clk_init(void) { - const struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate; prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; - cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST); cpu_mask = RATE_IN_242X; rate_table = omap2420_rate_table; - clk_init(&omap2_clk_functions); - for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks); c++) clk_preinit(c->lk.clk); @@ -1953,20 +1947,13 @@ int __init omap2420_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + /* Disable autoidle on all clocks; let the PM code enable it later */ omap_clk_disable_autoidle_all(); - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; + /* XXX Can this be done from the virt_prcm_set clk init function? */ + omap2xxx_clkt_vps_check_bootloader_rates(); recalculate_root_clocks(); @@ -1980,11 +1967,6 @@ int __init omap2420_clk_init(void) */ clk_enable_init_clocks(); - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - dclk = clk_get(NULL, "dpll_ck"); - return 0; } diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c index a8e326177466..e37df538bcd3 100644 --- a/arch/arm/mach-omap2/clock2430.c +++ b/arch/arm/mach-omap2/clock2430.c @@ -21,13 +21,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" /** diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 22404fe435e7..b179b6ef4329 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1,7 +1,7 @@ /* * OMAP2430 clock data * - * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2011 Nokia Corporation * * Contacts: @@ -17,14 +17,12 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" @@ -125,6 +123,7 @@ static struct clk dpll_ck = { .name = "dpll_ck", .ops = &clkops_omap2xxx_dpll_ops, .parent = &sys_ck, /* Can be func_32k also */ + .init = &omap2xxx_clkt_dpllcore_init, .dpll_data = &dpll_dd, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, @@ -2025,17 +2024,12 @@ static struct omap_clk omap2430_clks[] = { int __init omap2430_clk_init(void) { - const struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate; prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; - cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST); cpu_mask = RATE_IN_243X; rate_table = omap2430_rate_table; - clk_init(&omap2_clk_functions); - for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks); c++) clk_preinit(c->lk.clk); @@ -2052,20 +2046,13 @@ int __init omap2430_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + /* Disable autoidle on all clocks; let the PM code enable it later */ omap_clk_disable_autoidle_all(); - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; + /* XXX Can this be done from the virt_prcm_set clk init function? */ + omap2xxx_clkt_vps_check_bootloader_rates(); recalculate_root_clocks(); @@ -2079,11 +2066,6 @@ int __init omap2430_clk_init(void) */ clk_enable_init_clocks(); - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - dclk = clk_get(NULL, "dpll_ck"); - return 0; } diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index e92be1fc1a00..5f7faeb4c19b 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -22,35 +22,17 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "cm.h" #include "cm-regbits-24xx.h" -struct clk *vclk, *sclk, *dclk; - /* * Omap24xx specific clock functions */ /* - * Set clocks for bypass mode for reboot to work. - */ -void omap2xxx_clk_prepare_for_reboot(void) -{ - u32 rate; - - if (vclk == NULL || sclk == NULL) - return; - - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); -} - -/* * Switch the MPU rate if specified on cmdline. We cannot do this * early until cmdline is parsed. XXX This should be removed from the * clock code and handled by the OPP layer code in the near future. diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index cb6df8ca9e4a..ce809c913b6f 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -15,10 +15,13 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk *clk); unsigned long omap2_osc_clk_recalc(struct clk *clk); unsigned long omap2_dpllcore_recalc(struct clk *clk); int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); -unsigned long omap2xxx_clk_get_core_rate(struct clk *clk); +unsigned long omap2xxx_clk_get_core_rate(void); u32 omap2xxx_get_apll_clkin(void); u32 omap2xxx_get_sysclkdiv(void); void omap2xxx_clk_prepare_for_reboot(void); +void omap2xxx_clkt_dpllcore_init(struct clk *clk); +void omap2xxx_clkt_vps_check_bootloader_rates(void); +void omap2xxx_clkt_vps_late_init(void); #ifdef CONFIG_SOC_OMAP2420 int omap2420_clk_init(void); @@ -32,9 +35,7 @@ int omap2430_clk_init(void); #define omap2430_clk_init() do { } while(0) #endif -extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll; - -extern struct clk *dclk; +extern void __iomem *prcm_clksrc_ctrl; extern const struct clkops clkops_omap2430_i2chs_wait; extern const struct clkops clkops_oscck; diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 1a45d6bd2539..17e3de51bcba 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -17,9 +17,8 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/clk.h> -#include <plat/clkdev_omap.h> -#include "am33xx.h" +#include "soc.h" #include "iomap.h" #include "control.h" #include "clock.h" @@ -1087,8 +1086,6 @@ int __init am33xx_clk_init(void) cpu_clkflg = CK_AM33XX; } - clk_init(&omap2_clk_functions); - for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 1fc96b9ee330..e41819ba7482 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -21,11 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock34xx.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" /** diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c index 2e97d08f0e56..622ea0502610 100644 --- a/arch/arm/mach-omap2/clock3517.c +++ b/arch/arm/mach-omap2/clock3517.c @@ -21,11 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock3517.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" /* diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c index 0c5e25ed8879..0e1e9e4e2fa4 100644 --- a/arch/arm/mach-omap2/clock36xx.c +++ b/arch/arm/mach-omap2/clock36xx.c @@ -22,8 +22,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock36xx.h" diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 83bb01427d40..3e8aca2b1b61 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -21,8 +21,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock3xxx.h" diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 1f42c9d5ecf3..6cca19953950 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -21,8 +21,6 @@ #include <linux/list.h> #include <linux/io.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" @@ -30,7 +28,7 @@ #include "clock34xx.h" #include "clock36xx.h" #include "clock3517.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-34xx.h" @@ -3573,8 +3571,6 @@ int __init omap3xxx_clk_init(void) else dpll4_dd = dpll4_dd_34xx; - clk_init(&omap2_clk_functions); - for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 6efc30c961a5..2a450c9b9a7b 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -28,8 +28,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" @@ -3366,8 +3364,6 @@ int __init omap4xxx_clk_init(void) return 0; } - clk_init(&omap2_clk_functions); - /* * Must stay commented until all OMAP SoC drivers are * converted to runtime PM, or drivers may start crashing diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 512e79a842cb..64e50465a4b5 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -27,7 +27,8 @@ #include <linux/bitops.h> -#include <plat/clock.h> +#include "soc.h" +#include "clock.h" #include "clockdomain.h" /* clkdm_list contains all registered struct clockdomains */ diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 629576be7444..bc42446e23ab 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -18,9 +18,8 @@ #include <linux/spinlock.h> #include "powerdomain.h" -#include <plat/clock.h> -#include <plat/omap_hwmod.h> -#include <plat/cpu.h> +#include "clock.h" +#include "omap_hwmod.h" /* * Clockdomain flags diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c deleted file mode 100644 index 70294f54e35a..000000000000 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * OMAP2 and OMAP3 clockdomain control - * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Derived from mach-omap2/clockdomain.c written by Paul Walmsley - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <plat/prcm.h> -#include "prm.h" -#include "prm2xxx_3xxx.h" -#include "cm.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-24xx.h" -#include "cm-regbits-34xx.h" -#include "prm-regbits-24xx.h" -#include "clockdomain.h" - -static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); - return 0; -} - -static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); - return 0; -} - -static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, - PM_WKDEP, (1 << clkdm2->dep_bit)); -} - -static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) -{ - struct clkdm_dep *cd; - u32 mask = 0; - - for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { - if (!cd->clkdm) - continue; /* only happens if data is erroneous */ - - /* PRM accesses are slow, so minimize them */ - mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->wkdep_usecount, 0); - } - - omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, - PM_WKDEP); - return 0; -} - -static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); - return 0; -} - -static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); - return 0; -} - -static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit)); -} - -static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) -{ - struct clkdm_dep *cd; - u32 mask = 0; - - for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) { - if (!cd->clkdm) - continue; /* only happens if data is erroneous */ - - /* PRM accesses are slow, so minimize them */ - mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->sleepdep_usecount, 0); - } - omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); - return 0; -} - -static int omap2_clkdm_sleep(struct clockdomain *clkdm) -{ - omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, - clkdm->pwrdm.ptr->prcm_offs, - OMAP2_PM_PWSTCTRL); - return 0; -} - -static int omap2_clkdm_wakeup(struct clockdomain *clkdm) -{ - omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, - clkdm->pwrdm.ptr->prcm_offs, - OMAP2_PM_PWSTCTRL); - return 0; -} - -static void omap2_clkdm_allow_idle(struct clockdomain *clkdm) -{ - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_add_autodeps(clkdm); - - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); -} - -static void omap2_clkdm_deny_idle(struct clockdomain *clkdm) -{ - omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_del_autodeps(clkdm); -} - -static void _enable_hwsup(struct clockdomain *clkdm) -{ - if (cpu_is_omap24xx()) - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - else if (cpu_is_omap34xx()) - omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); -} - -static void _disable_hwsup(struct clockdomain *clkdm) -{ - if (cpu_is_omap24xx()) - omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - else if (cpu_is_omap34xx()) - omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); -} - -static int omap3_clkdm_sleep(struct clockdomain *clkdm) -{ - omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - return 0; -} - -static int omap3_clkdm_wakeup(struct clockdomain *clkdm) -{ - omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - return 0; -} - -static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->clktrctrl_mask) - return 0; - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_add_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - omap2_clkdm_wakeup(clkdm); - } - - return 0; -} - -static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->clktrctrl_mask) - return 0; - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_del_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) - omap2_clkdm_sleep(clkdm); - } - - return 0; -} - -static void omap3_clkdm_allow_idle(struct clockdomain *clkdm) -{ - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_add_autodeps(clkdm); - - omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); -} - -static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) -{ - omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_del_autodeps(clkdm); -} - -static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->clktrctrl_mask) - return 0; - - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && - (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { - omap3_clkdm_wakeup(clkdm); - return 0; - } - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_add_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - omap3_clkdm_wakeup(clkdm); - } - - return 0; -} - -static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->clktrctrl_mask) - return 0; - - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && - !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { - _enable_hwsup(clkdm); - return 0; - } - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_del_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) - omap3_clkdm_sleep(clkdm); - } - - return 0; -} - -struct clkdm_ops omap2_clkdm_operations = { - .clkdm_add_wkdep = omap2_clkdm_add_wkdep, - .clkdm_del_wkdep = omap2_clkdm_del_wkdep, - .clkdm_read_wkdep = omap2_clkdm_read_wkdep, - .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, - .clkdm_sleep = omap2_clkdm_sleep, - .clkdm_wakeup = omap2_clkdm_wakeup, - .clkdm_allow_idle = omap2_clkdm_allow_idle, - .clkdm_deny_idle = omap2_clkdm_deny_idle, - .clkdm_clk_enable = omap2_clkdm_clk_enable, - .clkdm_clk_disable = omap2_clkdm_clk_disable, -}; - -struct clkdm_ops omap3_clkdm_operations = { - .clkdm_add_wkdep = omap2_clkdm_add_wkdep, - .clkdm_del_wkdep = omap2_clkdm_del_wkdep, - .clkdm_read_wkdep = omap2_clkdm_read_wkdep, - .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, - .clkdm_add_sleepdep = omap3_clkdm_add_sleepdep, - .clkdm_del_sleepdep = omap3_clkdm_del_sleepdep, - .clkdm_read_sleepdep = omap3_clkdm_read_sleepdep, - .clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps, - .clkdm_sleep = omap3_clkdm_sleep, - .clkdm_wakeup = omap3_clkdm_wakeup, - .clkdm_allow_idle = omap3_clkdm_allow_idle, - .clkdm_deny_idle = omap3_clkdm_deny_idle, - .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, - .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, -}; diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c deleted file mode 100644 index aca6388fad76..000000000000 --- a/arch/arm/mach-omap2/clockdomain33xx.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * AM33XX clockdomain control - * - * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ - * Vaibhav Hiremath <hvaibhav@ti.com> - * - * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> - -#include "clockdomain.h" -#include "cm33xx.h" - - -static int am33xx_clkdm_sleep(struct clockdomain *clkdm) -{ - am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs); - return 0; -} - -static int am33xx_clkdm_wakeup(struct clockdomain *clkdm) -{ - am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs); - return 0; -} - -static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm) -{ - am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); -} - -static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm) -{ - am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); -} - -static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm) -{ - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - return am33xx_clkdm_wakeup(clkdm); - - return 0; -} - -static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); - - if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) - am33xx_clkdm_sleep(clkdm); - - return 0; -} - -struct clkdm_ops am33xx_clkdm_operations = { - .clkdm_sleep = am33xx_clkdm_sleep, - .clkdm_wakeup = am33xx_clkdm_wakeup, - .clkdm_allow_idle = am33xx_clkdm_allow_idle, - .clkdm_deny_idle = am33xx_clkdm_deny_idle, - .clkdm_clk_enable = am33xx_clkdm_clk_enable, - .clkdm_clk_disable = am33xx_clkdm_clk_disable, -}; diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c deleted file mode 100644 index 6fc6155625bc..000000000000 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * OMAP4 clockdomain control - * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Derived from mach-omap2/clockdomain.c written by Paul Walmsley - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include "clockdomain.h" -#include "cminst44xx.h" -#include "cm44xx.h" - -static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit), - clkdm1->prcm_partition, - clkdm1->cm_inst, clkdm1->clkdm_offs + - OMAP4_CM_STATICDEP); - return 0; -} - -static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit), - clkdm1->prcm_partition, - clkdm1->cm_inst, clkdm1->clkdm_offs + - OMAP4_CM_STATICDEP); - return 0; -} - -static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition, - clkdm1->cm_inst, clkdm1->clkdm_offs + - OMAP4_CM_STATICDEP, - (1 << clkdm2->dep_bit)); -} - -static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) -{ - struct clkdm_dep *cd; - u32 mask = 0; - - if (!clkdm->prcm_partition) - return 0; - - for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { - if (!cd->clkdm) - continue; /* only happens if data is erroneous */ - - mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->wkdep_usecount, 0); - } - - omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs + - OMAP4_CM_STATICDEP); - return 0; -} - -static int omap4_clkdm_sleep(struct clockdomain *clkdm) -{ - omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); - return 0; -} - -static int omap4_clkdm_wakeup(struct clockdomain *clkdm) -{ - omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); - return 0; -} - -static void omap4_clkdm_allow_idle(struct clockdomain *clkdm) -{ - omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); -} - -static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) -{ - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - omap4_clkdm_wakeup(clkdm); - else - omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, - clkdm->clkdm_offs); -} - -static int omap4_clkdm_clk_enable(struct clockdomain *clkdm) -{ - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - return omap4_clkdm_wakeup(clkdm); - - return 0; -} - -static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->prcm_partition) - return 0; - - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && - !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { - omap4_clkdm_allow_idle(clkdm); - return 0; - } - - hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); - - if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) - omap4_clkdm_sleep(clkdm); - - return 0; -} - -struct clkdm_ops omap4_clkdm_operations = { - .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep, - .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep, - .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep, - .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps, - .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep, - .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep, - .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep, - .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps, - .clkdm_sleep = omap4_clkdm_sleep, - .clkdm_wakeup = omap4_clkdm_wakeup, - .clkdm_allow_idle = omap4_clkdm_allow_idle, - .clkdm_deny_idle = omap4_clkdm_deny_idle, - .clkdm_clk_enable = omap4_clkdm_clk_enable, - .clkdm_clk_disable = omap4_clkdm_clk_disable, -}; diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c index 5c741852fac0..7e76becf3a4a 100644 --- a/arch/arm/mach-omap2/clockdomains2420_data.c +++ b/arch/arm/mach-omap2/clockdomains2420_data.c @@ -35,6 +35,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c index f09617555e15..b923007e45d0 100644 --- a/arch/arm/mach-omap2/clockdomains2430_data.c +++ b/arch/arm/mach-omap2/clockdomains2430_data.c @@ -35,6 +35,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 933a35cd124a..e6b91e552d3d 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -33,6 +33,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 686290437568..11eaf16880c4 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -333,7 +333,9 @@ #define OMAP24XX_EN_DPLL_MASK (0x3 << 0) /* CM_IDLEST_CKGEN */ +#define OMAP24XX_ST_54M_APLL_SHIFT 9 #define OMAP24XX_ST_54M_APLL_MASK (1 << 9) +#define OMAP24XX_ST_96M_APLL_SHIFT 8 #define OMAP24XX_ST_96M_APLL_MASK (1 << 8) #define OMAP24XX_ST_54M_CLK_MASK (1 << 6) #define OMAP24XX_ST_12M_CLK_MASK (1 << 5) diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index f24e3f7a2bbc..93473f9a551c 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -1,7 +1,7 @@ /* * OMAP2+ Clock Management prototypes * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley @@ -22,6 +22,12 @@ */ #define MAX_MODULE_READY_TIME 2000 +# ifndef __ASSEMBLER__ +extern void __iomem *cm_base; +extern void __iomem *cm2_base; +extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2); +# endif + /* * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for * the PRCM to request that a module enter the inactive state in the @@ -33,4 +39,26 @@ */ #define MAX_MODULE_DISABLE_TIME 5000 +# ifndef __ASSEMBLER__ + +/** + * struct cm_ll_data - fn ptrs to per-SoC CM function implementations + * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl + * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl + */ +struct cm_ll_data { + int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id); + int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); +}; + +extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id); +extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); + +extern int cm_register(struct cm_ll_data *cld); +extern int cm_unregister(struct cm_ll_data *cld); + +# endif + #endif diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c new file mode 100644 index 000000000000..db650690e9d0 --- /dev/null +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -0,0 +1,381 @@ +/* + * OMAP2xxx CM module functions + * + * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc. + * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "soc.h" +#include "iomap.h" +#include "common.h" +#include "prm2xxx.h" +#include "cm.h" +#include "cm2xxx.h" +#include "cm-regbits-24xx.h" +#include "clockdomain.h" + +/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */ +#define DPLL_AUTOIDLE_DISABLE 0x0 +#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3 + +/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */ +#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0 +#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 + +/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */ +#define EN_APLL_LOCKED 3 + +static const u8 omap2xxx_cm_idlest_offs[] = { + CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4 +}; + +/* + * + */ + +static void _write_clktrctrl(u8 c, s16 module, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); + v &= ~mask; + v |= c << __ffs(mask); + omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL); +} + +bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); + v &= mask; + v >>= __ffs(mask); + + return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; +} + +void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) +{ + _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask); +} + +void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) +{ + _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask); +} + +/* + * DPLL autoidle control + */ + +static void _omap2xxx_set_dpll_autoidle(u8 m) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + v &= ~OMAP24XX_AUTO_DPLL_MASK; + v |= m << OMAP24XX_AUTO_DPLL_SHIFT; + omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); +} + +void omap2xxx_cm_set_dpll_disable_autoidle(void) +{ + _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP); +} + +void omap2xxx_cm_set_dpll_auto_low_power_stop(void) +{ + _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE); +} + +/* + * APLL control + */ + +static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + v &= ~mask; + v |= m << __ffs(mask); + omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); +} + +void omap2xxx_cm_set_apll54_disable_autoidle(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, + OMAP24XX_AUTO_54M_MASK); +} + +void omap2xxx_cm_set_apll54_auto_low_power_stop(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, + OMAP24XX_AUTO_54M_MASK); +} + +void omap2xxx_cm_set_apll96_disable_autoidle(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, + OMAP24XX_AUTO_96M_MASK); +} + +void omap2xxx_cm_set_apll96_auto_low_power_stop(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, + OMAP24XX_AUTO_96M_MASK); +} + +/* Enable an APLL if off */ +static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit) +{ + u32 v, m; + + m = EN_APLL_LOCKED << enable_bit; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + if (v & m) + return 0; /* apll already enabled */ + + v |= m; + omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); + + omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit); + + /* + * REVISIT: Should we return an error code if + * omap2xxx_cm_wait_module_ready() fails? + */ + return 0; +} + +/* Stop APLL */ +static void _omap2xxx_apll_disable(u8 enable_bit) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + v &= ~(EN_APLL_LOCKED << enable_bit); + omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); +} + +/* Enable an APLL if off */ +int omap2xxx_cm_apll54_enable(void) +{ + return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT, + OMAP24XX_ST_54M_APLL_SHIFT); +} + +/* Enable an APLL if off */ +int omap2xxx_cm_apll96_enable(void) +{ + return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT, + OMAP24XX_ST_96M_APLL_SHIFT); +} + +/* Stop APLL */ +void omap2xxx_cm_apll54_disable(void) +{ + _omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT); +} + +/* Stop APLL */ +void omap2xxx_cm_apll96_disable(void) +{ + _omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT); +} + +/** + * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * XXX This function is only needed until absolute register addresses are + * removed from the OMAP struct clk records. + */ +int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + unsigned long offs; + u8 idlest_offs; + int i; + + if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff)) + return -EINVAL; + + idlest_offs = (unsigned long)idlest_reg & 0xff; + for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) { + if (idlest_offs == omap2xxx_cm_idlest_offs[i]) { + *idlest_reg_id = i + 1; + break; + } + } + + if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs)) + return -EINVAL; + + offs = idlest_reg - cm_base; + offs &= 0xff00; + *prcm_inst = offs; + + return 0; +} + +/* + * + */ + +/** + * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby + * @prcm_mod: PRCM module offset + * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success or -EBUSY if the module doesn't enable in time. + */ +int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +{ + int ena = 0, i = 0; + u8 cm_idlest_reg; + u32 mask; + + if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs))) + return -EINVAL; + + cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1]; + + mask = 1 << idlest_shift; + ena = mask; + + omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & + mask) == ena), MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/* Clockdomain low-level functions */ + +static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); + + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + +static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm) +{ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} + +static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_add_autodeps(clkdm); + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap2xxx_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_del_autodeps(clkdm); + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap2xxx_clkdm_sleep(clkdm); + } + + return 0; +} + +struct clkdm_ops omap2_clkdm_operations = { + .clkdm_add_wkdep = omap2_clkdm_add_wkdep, + .clkdm_del_wkdep = omap2_clkdm_del_wkdep, + .clkdm_read_wkdep = omap2_clkdm_read_wkdep, + .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, + .clkdm_sleep = omap2xxx_clkdm_sleep, + .clkdm_wakeup = omap2xxx_clkdm_wakeup, + .clkdm_allow_idle = omap2xxx_clkdm_allow_idle, + .clkdm_deny_idle = omap2xxx_clkdm_deny_idle, + .clkdm_clk_enable = omap2xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap2xxx_clkdm_clk_disable, +}; + +/* + * + */ + +static struct cm_ll_data omap2xxx_cm_ll_data = { + .split_idlest_reg = &omap2xxx_cm_split_idlest_reg, + .wait_module_ready = &omap2xxx_cm_wait_module_ready, +}; + +int __init omap2xxx_cm_init(void) +{ + if (!cpu_is_omap24xx()) + return 0; + + return cm_register(&omap2xxx_cm_ll_data); +} + +static void __exit omap2xxx_cm_exit(void) +{ + if (!cpu_is_omap24xx()) + return; + + /* Should never happen */ + WARN(cm_unregister(&omap2xxx_cm_ll_data), + "%s: cm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap2xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h new file mode 100644 index 000000000000..4cbb39b051d2 --- /dev/null +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -0,0 +1,70 @@ +/* + * OMAP2xxx Clock Management (CM) register definitions + * + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. + * Copyright (C) 2007-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The CM hardware modules on the OMAP2/3 are quite similar to each + * other. The CM modules/instances on OMAP4 are quite different, so + * they are handled in a separate file. + */ +#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H +#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H + +#include "prcm-common.h" +#include "cm2xxx_3xxx.h" + +#define OMAP2420_CM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) +#define OMAP2430_CM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) + +/* + * Module specific CM register offsets from CM_BASE + domain offset + * Use cm_{read,write}_mod_reg() with these registers. + * These register offsets generally appear in more than one PRCM submodule. + */ + +/* OMAP2-specific register offsets */ + +#define OMAP24XX_CM_FCLKEN2 0x0004 +#define OMAP24XX_CM_ICLKEN4 0x001c +#define OMAP24XX_CM_AUTOIDLE4 0x003c +#define OMAP24XX_CM_IDLEST4 0x002c + +/* CM_IDLEST bit field values to indicate deasserted IdleReq */ + +#define OMAP24XX_CM_IDLEST_VAL 0 + + +/* Clock management domain register get/set */ + +#ifndef __ASSEMBLER__ + +extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); +extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); + +extern void omap2xxx_cm_set_dpll_disable_autoidle(void); +extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void); + +extern void omap2xxx_cm_set_apll54_disable_autoidle(void); +extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void); +extern void omap2xxx_cm_set_apll96_disable_autoidle(void); +extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void); + +extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask); +extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, + u8 idlest_shift); +extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, + s16 *prcm_inst, u8 *idlest_reg_id); + +extern int __init omap2xxx_cm_init(void); + +#endif + +#endif diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index 57b2f3c2fbf3..98e6b3c9cd9b 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -16,28 +16,7 @@ #ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H #define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H -#include "prcm-common.h" - -#define OMAP2420_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) -#define OMAP2430_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) -#define OMAP34XX_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) - - -/* - * OMAP3-specific global CM registers - * Use cm_{read,write}_reg() with these registers. - * These registers appear once per CM module. - */ - -#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) - -#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 -#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) +#include "cm.h" /* * Module specific CM register offsets from CM_BASE + domain offset @@ -57,6 +36,7 @@ #define CM_IDLEST 0x0020 #define CM_IDLEST1 CM_IDLEST #define CM_IDLEST2 0x0024 +#define OMAP2430_CM_IDLEST3 0x0028 #define CM_AUTOIDLE 0x0030 #define CM_AUTOIDLE1 CM_AUTOIDLE #define CM_AUTOIDLE2 0x0034 @@ -66,70 +46,60 @@ #define CM_CLKSEL2 0x0044 #define OMAP2_CM_CLKSTCTRL 0x0048 -/* OMAP2-specific register offsets */ - -#define OMAP24XX_CM_FCLKEN2 0x0004 -#define OMAP24XX_CM_ICLKEN4 0x001c -#define OMAP24XX_CM_AUTOIDLE4 0x003c -#define OMAP24XX_CM_IDLEST4 0x002c - -#define OMAP2430_CM_IDLEST3 0x0028 - -/* OMAP3-specific register offsets */ - -#define OMAP3430_CM_CLKEN_PLL 0x0004 -#define OMAP3430ES2_CM_CLKEN2 0x0004 -#define OMAP3430ES2_CM_FCLKEN3 0x0008 -#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2 -#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2 -#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2 -#define OMAP3430_CM_CLKSEL1 CM_CLKSEL -#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL -#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2 -#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2 -#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL -#define OMAP3430_CM_CLKSTST 0x004c -#define OMAP3430ES2_CM_CLKSEL4 0x004c -#define OMAP3430ES2_CM_CLKSEL5 0x0050 -#define OMAP3430_CM_CLKSEL2_EMU 0x0050 -#define OMAP3430_CM_CLKSEL3_EMU 0x0054 +#ifndef __ASSEMBLER__ +#include <linux/io.h> -/* CM_IDLEST bit field values to indicate deasserted IdleReq */ +static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx) +{ + return __raw_readl(cm_base + module + idx); +} -#define OMAP24XX_CM_IDLEST_VAL 0 -#define OMAP34XX_CM_IDLEST_VAL 1 +static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + __raw_writel(val, cm_base + module + idx); +} +/* Read-modify-write a register in a CM module. Caller must lock */ +static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, + s16 idx) +{ + u32 v; -/* Clock management domain register get/set */ + v = omap2_cm_read_mod_reg(module, idx); + v &= ~mask; + v |= bits; + omap2_cm_write_mod_reg(v, module, idx); -#ifndef __ASSEMBLER__ + return v; +} -extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx); -extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx); -extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); +/* Read a CM register, AND it, and shift the result down to bit 0 */ +static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + u32 v; -extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, - u8 idlest_shift); -extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx); -extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx); + v = omap2_cm_read_mod_reg(domain, idx); + v &= mask; + v >>= __ffs(mask); -extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask); -extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); -extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); + return v; +} -extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask); +static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx); +} -extern void omap2xxx_cm_set_dpll_disable_autoidle(void); -extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void); +static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx); +} -extern void omap2xxx_cm_set_apll54_disable_autoidle(void); -extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void); -extern void omap2xxx_cm_set_apll96_disable_autoidle(void); -extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void); +extern int omap2xxx_cm_apll54_enable(void); +extern void omap2xxx_cm_apll54_disable(void); +extern int omap2xxx_cm_apll96_enable(void); +extern void omap2xxx_cm_apll96_disable(void); #endif @@ -146,11 +116,4 @@ extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void); /* CM_IDLEST_GFX */ #define OMAP_ST_GFX_MASK (1 << 0) - -/* Function prototypes */ -# ifndef __ASSEMBLER__ -extern void omap3_cm_save_context(void); -extern void omap3_cm_restore_context(void); -# endif - #endif diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 13f56eafef03..058ce3c0873e 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -22,8 +22,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> - +#include "clockdomain.h" #include "cm.h" #include "cm33xx.h" #include "cm-regbits-34xx.h" @@ -311,3 +310,58 @@ void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs) v &= ~AM33XX_MODULEMODE_MASK; am33xx_cm_write_reg(v, inst, clkctrl_offs); } + +/* + * Clockdomain low-level functions + */ + +static int am33xx_clkdm_sleep(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static int am33xx_clkdm_wakeup(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + return am33xx_clkdm_wakeup(clkdm); + + return 0; +} + +static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + am33xx_clkdm_sleep(clkdm); + + return 0; +} + +struct clkdm_ops am33xx_clkdm_operations = { + .clkdm_sleep = am33xx_clkdm_sleep, + .clkdm_wakeup = am33xx_clkdm_wakeup, + .clkdm_allow_idle = am33xx_clkdm_allow_idle, + .clkdm_deny_idle = am33xx_clkdm_deny_idle, + .clkdm_clk_enable = am33xx_clkdm_clk_enable, + .clkdm_clk_disable = am33xx_clkdm_clk_disable, +}; diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 7f07ab02a5b3..c2086f2e86b6 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -1,8 +1,10 @@ /* - * OMAP2/3 CM module functions + * OMAP3xxx CM module functions * * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc. * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,8 +14,6 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> @@ -21,56 +21,16 @@ #include "soc.h" #include "iomap.h" #include "common.h" +#include "prm2xxx_3xxx.h" #include "cm.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-24xx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" +#include "clockdomain.h" -/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */ -#define DPLL_AUTOIDLE_DISABLE 0x0 -#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3 - -/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */ -#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0 -#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 - -static const u8 cm_idlest_offs[] = { - CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4 +static const u8 omap3xxx_cm_idlest_offs[] = { + CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3 }; -u32 omap2_cm_read_mod_reg(s16 module, u16 idx) -{ - return __raw_readl(cm_base + module + idx); -} - -void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) -{ - __raw_writel(val, cm_base + module + idx); -} - -/* Read-modify-write a register in a CM module. Caller must lock */ -u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) -{ - u32 v; - - v = omap2_cm_read_mod_reg(module, idx); - v &= ~mask; - v |= bits; - omap2_cm_write_mod_reg(v, module, idx); - - return v; -} - -u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx); -} - -u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx); -} - /* * */ @@ -85,33 +45,15 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask) omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL); } -bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask) +bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) { u32 v; - bool ret = 0; - - BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx()); v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); v &= mask; v >>= __ffs(mask); - if (cpu_is_omap24xx()) - ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; - else - ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; - - return ret; -} - -void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) -{ - _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask); -} - -void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) -{ - _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask); + return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; } void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) @@ -135,109 +77,247 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask) } /* - * DPLL autoidle control + * */ -static void _omap2xxx_set_dpll_autoidle(u8 m) +/** + * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby + * @prcm_mod: PRCM module offset + * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success or -EBUSY if the module doesn't enable in time. + */ +int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) { - u32 v; + int ena = 0, i = 0; + u8 cm_idlest_reg; + u32 mask; - v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); - v &= ~OMAP24XX_AUTO_DPLL_MASK; - v |= m << OMAP24XX_AUTO_DPLL_SHIFT; - omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); -} + if (!idlest_id || (idlest_id > ARRAY_SIZE(omap3xxx_cm_idlest_offs))) + return -EINVAL; -void omap2xxx_cm_set_dpll_disable_autoidle(void) -{ - _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP); + cm_idlest_reg = omap3xxx_cm_idlest_offs[idlest_id - 1]; + + mask = 1 << idlest_shift; + ena = 0; + + omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & + mask) == ena), MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } -void omap2xxx_cm_set_dpll_auto_low_power_stop(void) +/** + * omap3xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * XXX This function is only needed until absolute register addresses are + * removed from the OMAP struct clk records. + */ +int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) { - _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE); + unsigned long offs; + u8 idlest_offs; + int i; + + if (idlest_reg < (cm_base + OMAP3430_IVA2_MOD) || + idlest_reg > (cm_base + 0x1ffff)) + return -EINVAL; + + idlest_offs = (unsigned long)idlest_reg & 0xff; + for (i = 0; i < ARRAY_SIZE(omap3xxx_cm_idlest_offs); i++) { + if (idlest_offs == omap3xxx_cm_idlest_offs[i]) { + *idlest_reg_id = i + 1; + break; + } + } + + if (i == ARRAY_SIZE(omap3xxx_cm_idlest_offs)) + return -EINVAL; + + offs = idlest_reg - cm_base; + offs &= 0xff00; + *prcm_inst = offs; + + return 0; } -/* - * APLL autoidle control - */ +/* Clockdomain low-level operations */ -static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask) +static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { - u32 v; + omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; +} - v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); - v &= ~mask; - v |= m << __ffs(mask); - omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); +static int omap3xxx_clkdm_del_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; } -void omap2xxx_cm_set_apll54_disable_autoidle(void) +static int omap3xxx_clkdm_read_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { - _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, - OMAP24XX_AUTO_54M_MASK); + return omap2_cm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP, + (1 << clkdm2->dep_bit)); } -void omap2xxx_cm_set_apll54_auto_low_power_stop(void) +static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) { - _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, - OMAP24XX_AUTO_54M_MASK); + struct clkdm_dep *cd; + u32 mask = 0; + + for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) { + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->sleepdep_usecount, 0); + } + omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; } -void omap2xxx_cm_set_apll96_disable_autoidle(void) +static int omap3xxx_clkdm_sleep(struct clockdomain *clkdm) { - _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, - OMAP24XX_AUTO_96M_MASK); + omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; } -void omap2xxx_cm_set_apll96_auto_low_power_stop(void) +static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm) { - _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, - OMAP24XX_AUTO_96M_MASK); + omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; } -/* - * - */ +static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); -/** - * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby - * @prcm_mod: PRCM module offset - * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) - * @idlest_shift: shift of the bit in the CM_IDLEST* register to check - * - * XXX document - */ -int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + +static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm) { - int ena = 0, i = 0; - u8 cm_idlest_reg; - u32 mask; + omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); - if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs))) - return -EINVAL; + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} - cm_idlest_reg = cm_idlest_offs[idlest_id - 1]; +static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; - mask = 1 << idlest_shift; + if (!clkdm->clktrctrl_mask) + return 0; - if (cpu_is_omap24xx()) - ena = mask; - else if (cpu_is_omap34xx()) - ena = 0; - else - BUG(); + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && + (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { + omap3xxx_clkdm_wakeup(clkdm); + return 0; + } + + hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_add_autodeps(clkdm); + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap3xxx_clkdm_wakeup(clkdm); + } + + return 0; +} - omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena), - MAX_MODULE_READY_TIME, i); +static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + if (!clkdm->clktrctrl_mask) + return 0; + + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; + } + + hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_del_autodeps(clkdm); + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap3xxx_clkdm_sleep(clkdm); + } + + return 0; } +struct clkdm_ops omap3_clkdm_operations = { + .clkdm_add_wkdep = omap2_clkdm_add_wkdep, + .clkdm_del_wkdep = omap2_clkdm_del_wkdep, + .clkdm_read_wkdep = omap2_clkdm_read_wkdep, + .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, + .clkdm_add_sleepdep = omap3xxx_clkdm_add_sleepdep, + .clkdm_del_sleepdep = omap3xxx_clkdm_del_sleepdep, + .clkdm_read_sleepdep = omap3xxx_clkdm_read_sleepdep, + .clkdm_clear_all_sleepdeps = omap3xxx_clkdm_clear_all_sleepdeps, + .clkdm_sleep = omap3xxx_clkdm_sleep, + .clkdm_wakeup = omap3xxx_clkdm_wakeup, + .clkdm_allow_idle = omap3xxx_clkdm_allow_idle, + .clkdm_deny_idle = omap3xxx_clkdm_deny_idle, + .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, +}; + /* * Context save/restore code - OMAP3 only */ -#ifdef CONFIG_ARCH_OMAP3 struct omap3_cm_regs { u32 iva2_cm_clksel1; u32 iva2_cm_clksel2; @@ -555,4 +635,31 @@ void omap3_cm_restore_context(void) omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD, OMAP3_CM_CLKOUT_CTRL_OFFSET); } -#endif + +/* + * + */ + +static struct cm_ll_data omap3xxx_cm_ll_data = { + .split_idlest_reg = &omap3xxx_cm_split_idlest_reg, + .wait_module_ready = &omap3xxx_cm_wait_module_ready, +}; + +int __init omap3xxx_cm_init(void) +{ + if (!cpu_is_omap34xx()) + return 0; + + return cm_register(&omap3xxx_cm_ll_data); +} + +static void __exit omap3xxx_cm_exit(void) +{ + if (!cpu_is_omap34xx()) + return; + + /* Should never happen */ + WARN(cm_unregister(&omap3xxx_cm_ll_data), + "%s: cm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap3xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h new file mode 100644 index 000000000000..e8e146f4a43f --- /dev/null +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -0,0 +1,91 @@ +/* + * OMAP2/3 Clock Management (CM) register definitions + * + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The CM hardware modules on the OMAP2/3 are quite similar to each + * other. The CM modules/instances on OMAP4 are quite different, so + * they are handled in a separate file. + */ +#ifndef __ARCH_ASM_MACH_OMAP2_CM3XXX_H +#define __ARCH_ASM_MACH_OMAP2_CM3XXX_H + +#include "prcm-common.h" +#include "cm2xxx_3xxx.h" + +#define OMAP34XX_CM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) + + +/* + * OMAP3-specific global CM registers + * Use cm_{read,write}_reg() with these registers. + * These registers appear once per CM module. + */ + +#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) + +#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) + +/* + * Module specific CM register offsets from CM_BASE + domain offset + * Use cm_{read,write}_mod_reg() with these registers. + * These register offsets generally appear in more than one PRCM submodule. + */ + +/* OMAP3-specific register offsets */ + +#define OMAP3430_CM_CLKEN_PLL 0x0004 +#define OMAP3430ES2_CM_CLKEN2 0x0004 +#define OMAP3430ES2_CM_FCLKEN3 0x0008 +#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2 +#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2 +#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2 +#define OMAP3430_CM_CLKSEL1 CM_CLKSEL +#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL +#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2 +#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2 +#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL +#define OMAP3430_CM_CLKSTST 0x004c +#define OMAP3430ES2_CM_CLKSEL4 0x004c +#define OMAP3430ES2_CM_CLKSEL5 0x0050 +#define OMAP3430_CM_CLKSEL2_EMU 0x0050 +#define OMAP3430_CM_CLKSEL3_EMU 0x0054 + + +/* CM_IDLEST bit field values to indicate deasserted IdleReq */ + +#define OMAP34XX_CM_IDLEST_VAL 1 + + +#ifndef __ASSEMBLER__ + +extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); +extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); +extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask); +extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask); + +extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask); +extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, + u8 idlest_shift); + +extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, + s16 *prcm_inst, u8 *idlest_reg_id); + +extern void omap3_cm_save_context(void); +extern void omap3_cm_restore_context(void); + +extern int __init omap3xxx_cm_init(void); + +#endif + +#endif diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c new file mode 100644 index 000000000000..40b3b5a84458 --- /dev/null +++ b/arch/arm/mach-omap2/cm_common.c @@ -0,0 +1,140 @@ +/* + * OMAP2+ common Clock Management (CM) IP block functions + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * XXX This code should eventually be moved to a CM driver. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> + +#include "cm2xxx.h" +#include "cm3xxx.h" +#include "cm44xx.h" +#include "common.h" + +/* + * cm_ll_data: function pointers to SoC-specific implementations of + * common CM functions + */ +static struct cm_ll_data null_cm_ll_data; +static struct cm_ll_data *cm_ll_data = &null_cm_ll_data; + +/* cm_base: base virtual address of the CM IP block */ +void __iomem *cm_base; + +/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */ +void __iomem *cm2_base; + +/** + * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use) + * @cm: CM base virtual address + * @cm2: CM2 base virtual address (if present on the booted SoC) + * + * XXX Will be replaced when the PRM/CM drivers are completed. + */ +void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2) +{ + cm_base = cm; + cm2_base = cm2; +} + +/** + * cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * Given an absolute CM_IDLEST register address @idlest_reg, passes + * the PRCM instance offset and IDLEST register ID back to the caller + * via the @prcm_inst and @idlest_reg_id. Returns -EINVAL upon error, + * or 0 upon success. XXX This function is only needed until absolute + * register addresses are removed from the OMAP struct clk records. + */ +int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + if (!cm_ll_data->split_idlest_reg) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst, + idlest_reg_id); +} + +/** + * cm_wait_module_ready - wait for a module to leave idle or standby + * @prcm_mod: PRCM module offset + * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success, -EBUSY if the module doesn't enable in time, or -EINVAL if + * no per-SoC wait_module_ready() function pointer has been registered + * or if the idlest register is unknown on the SoC. + */ +int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +{ + if (!cm_ll_data->wait_module_ready) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift); +} + +/** + * cm_register - register per-SoC low-level data with the CM + * @cld: low-level per-SoC OMAP CM data & function pointers to register + * + * Register per-SoC low-level OMAP CM data and function pointers with + * the OMAP CM common interface. The caller must keep the data + * pointed to by @cld valid until it calls cm_unregister() and + * it returns successfully. Returns 0 upon success, -EINVAL if @cld + * is NULL, or -EEXIST if cm_register() has already been called + * without an intervening cm_unregister(). + */ +int cm_register(struct cm_ll_data *cld) +{ + if (!cld) + return -EINVAL; + + if (cm_ll_data != &null_cm_ll_data) + return -EEXIST; + + cm_ll_data = cld; + + return 0; +} + +/** + * cm_unregister - unregister per-SoC low-level data & function pointers + * @cld: low-level per-SoC OMAP CM data & function pointers to unregister + * + * Unregister per-SoC low-level OMAP CM data and function pointers + * that were previously registered with cm_register(). The + * caller may not destroy any of the data pointed to by @cld until + * this function returns successfully. Returns 0 upon success, or + * -EINVAL if @cld is NULL or if @cld does not match the struct + * cm_ll_data * previously registered by cm_register(). + */ +int cm_unregister(struct cm_ll_data *cld) +{ + if (!cld || cm_ll_data != cld) + return -EINVAL; + + cm_ll_data = &null_cm_ll_data; + + return 0; +} diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 1894015ff04b..7f9a464f01e9 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -2,8 +2,9 @@ * OMAP4 CM instance functions * * Copyright (C) 2009 Nokia Corporation - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2008-2011 Texas Instruments, Inc. * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,6 +23,7 @@ #include "iomap.h" #include "common.h" +#include "clockdomain.h" #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" @@ -343,3 +345,141 @@ void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, v &= ~OMAP4430_MODULEMODE_MASK; omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs); } + +/* + * Clockdomain low-level functions + */ + +static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit), + clkdm1->prcm_partition, + clkdm1->cm_inst, clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} + +static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit), + clkdm1->prcm_partition, + clkdm1->cm_inst, clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} + +static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition, + clkdm1->cm_inst, + clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP, + (1 << clkdm2->dep_bit)); +} + +static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) +{ + struct clkdm_dep *cd; + u32 mask = 0; + + if (!clkdm->prcm_partition) + return 0; + + for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->wkdep_usecount, 0); + } + + omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} + +static int omap4_clkdm_sleep(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static int omap4_clkdm_wakeup(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static void omap4_clkdm_allow_idle(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); +} + +static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap4_clkdm_wakeup(clkdm); + else + omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, + clkdm->clkdm_offs); +} + +static int omap4_clkdm_clk_enable(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + return omap4_clkdm_wakeup(clkdm); + + return 0; +} + +static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->prcm_partition) + return 0; + + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + omap4_clkdm_allow_idle(clkdm); + return 0; + } + + hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + omap4_clkdm_sleep(clkdm); + + return 0; +} + +struct clkdm_ops omap4_clkdm_operations = { + .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep, + .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep, + .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep, + .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps, + .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep, + .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep, + .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep, + .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps, + .clkdm_sleep = omap4_clkdm_sleep, + .clkdm_wakeup = omap4_clkdm_wakeup, + .clkdm_allow_idle = omap4_clkdm_allow_idle, + .clkdm_deny_idle = omap4_clkdm_deny_idle, + .clkdm_clk_enable = omap4_clkdm_clk_enable, + .clkdm_clk_disable = omap4_clkdm_clk_disable, +}; diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index d69fdefef985..bd7bab889745 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -38,4 +38,6 @@ extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask); +extern void omap_cm_base_init(void); + #endif diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 84551f205e46..d246efd9f734 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -25,7 +25,6 @@ #include <linux/spi/ads7846.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include "common-board-devices.h" @@ -102,48 +101,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, { } #endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct omap_nand_platform_data nand_data; - -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - pr_info("NAND: Unable to find configuration in GPMC\n"); - return; - } - - if (nandcs < GPMC_CS_NUM) { - nand_data.cs = nandcs; - nand_data.parts = parts; - nand_data.nr_parts = nr_parts; - nand_data.devsize = options; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} -#else -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ -} -#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a42836ab..72bb41b3fd25 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -10,6 +10,5 @@ struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); -void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 17950c6e130b..5c2fd4863b2b 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -14,189 +14,26 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> +#include <linux/platform_data/dsp-omap.h> -#include <plat/clock.h> +#include <plat/vram.h> -#include "soc.h" -#include "iomap.h" #include "common.h" -#include "sdrc.h" -#include "control.h" - -/* Global address base setup code */ - -static void __init __omap2_set_globals(struct omap_globals *omap2_globals) -{ - omap2_set_globals_tap(omap2_globals); - omap2_set_globals_sdrc(omap2_globals); - omap2_set_globals_control(omap2_globals); - omap2_set_globals_prcm(omap2_globals); -} - -#if defined(CONFIG_SOC_OMAP2420) - -static struct omap_globals omap242x_globals = { - .class = OMAP242X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x48014000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), -}; - -void __init omap2_set_globals_242x(void) -{ - __omap2_set_globals(&omap242x_globals); -} - -void __init omap242x_map_io(void) -{ - omap242x_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_OMAP2430) - -static struct omap_globals omap243x_globals = { - .class = OMAP243X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), -}; - -void __init omap2_set_globals_243x(void) -{ - __omap2_set_globals(&omap243x_globals); -} - -void __init omap243x_map_io(void) -{ - omap243x_map_common_io(); -} -#endif - -#if defined(CONFIG_ARCH_OMAP3) - -static struct omap_globals omap3_globals = { - .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), -}; - -void __init omap2_set_globals_3xxx(void) -{ - __omap2_set_globals(&omap3_globals); -} - -void __init omap3_map_io(void) -{ - omap34xx_map_common_io(); -} +#include "omap-secure.h" /* - * Adjust TAP register base such that omap3_check_revision accesses the correct - * TI81XX register for checking device ID (it adds 0x204 to tap base while - * TI81XX DEVICE ID register is at offset 0x600 from control base). + * Stub function for OMAP2 so that common files + * continue to build when custom builds are used */ -#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \ - TI81XX_CONTROL_DEVICE_ID - 0x204) - -static struct omap_globals ti81xx_globals = { - .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), -}; - -void __init omap2_set_globals_ti81xx(void) -{ - __omap2_set_globals(&ti81xx_globals); -} - -void __init ti81xx_map_io(void) -{ - omapti81xx_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_AM33XX) -#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \ - TI81XX_CONTROL_DEVICE_ID - 0x204) - -static struct omap_globals am33xx_globals = { - .class = AM335X_CLASS, - .tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE), - .ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), - .prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), - .cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), -}; - -void __init omap2_set_globals_am33xx(void) -{ - __omap2_set_globals(&am33xx_globals); -} - -void __init am33xx_map_io(void) -{ - omapam33xx_map_common_io(); -} -#endif - -#if defined(CONFIG_ARCH_OMAP4) -static struct omap_globals omap4_globals = { - .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), - .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), - .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE), -}; - -void __init omap2_set_globals_443x(void) -{ - __omap2_set_globals(&omap4_globals); -} - -void __init omap4_map_io(void) -{ - omap44xx_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_OMAP5) -static struct omap_globals omap5_globals = { - .class = OMAP54XX_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), - .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), - .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE), - .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE), -}; - -void __init omap2_set_globals_5xxx(void) +int __weak omap_secure_ram_reserve_memblock(void) { - omap2_set_globals_tap(&omap5_globals); - omap2_set_globals_control(&omap5_globals); - omap2_set_globals_prcm(&omap5_globals); + return 0; } -void __init omap5_map_io(void) +void __init omap_reserve(void) { - omap5_map_common_io(); + omap_vram_reserve_sdram_memblock(); + omap_dsp_reserve_sdram_memblock(); + omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } -#endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 7045e4d61ac3..948bcaa82eb6 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -28,63 +28,18 @@ #include <linux/irq.h> #include <linux/delay.h> +#include <linux/i2c.h> #include <linux/i2c/twl.h> +#include <linux/i2c-omap.h> #include <asm/proc-fns.h> -#include <plat/cpu.h> -#include <plat/serial.h> -#include <plat/common.h> +#include "i2c.h" +#include "serial.h" -#define OMAP_INTC_START NR_IRQS - -#ifdef CONFIG_SOC_OMAP2420 -extern void omap242x_map_common_io(void); -#else -static inline void omap242x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -extern void omap243x_map_common_io(void); -#else -static inline void omap243x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 -extern void omap34xx_map_common_io(void); -#else -static inline void omap34xx_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_TI81XX -extern void omapti81xx_map_common_io(void); -#else -static inline void omapti81xx_map_common_io(void) -{ -} -#endif +#include "usb.h" -#ifdef CONFIG_SOC_AM33XX -extern void omapam33xx_map_common_io(void); -#else -static inline void omapam33xx_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP4 -extern void omap44xx_map_common_io(void); -#else -static inline void omap44xx_map_common_io(void) -{ -} -#endif +#define OMAP_INTC_START NR_IRQS #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2) int omap2_pm_init(void); @@ -122,19 +77,12 @@ static inline int omap_mux_late_init(void) } #endif -#ifdef CONFIG_SOC_OMAP5 -extern void omap5_map_common_io(void); -#else -static inline void omap5_map_common_io(void) -{ -} -#endif - extern void omap2_init_common_infrastructure(void); extern struct sys_timer omap2_timer; extern struct sys_timer omap3_timer; extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap3_gp_timer; extern struct sys_timer omap3_am33xx_timer; extern struct sys_timer omap4_timer; extern struct sys_timer omap5_timer; @@ -162,52 +110,43 @@ void am35xx_init_late(void); void ti81xx_init_late(void); void omap4430_init_late(void); int omap2_common_pm_late_init(void); -void omap_prcm_restart(char, const char *); -/* - * IO bases for various OMAP processors - * Except the tap base, rest all the io bases - * listed are physical addresses. - */ -struct omap_globals { - u32 class; /* OMAP class to detect */ - void __iomem *tap; /* Control module ID code */ - void __iomem *sdrc; /* SDRAM Controller */ - void __iomem *sms; /* SDRAM Memory Scheduler */ - void __iomem *ctrl; /* System Control Module */ - void __iomem *ctrl_pad; /* PAD Control Module */ - void __iomem *prm; /* Power and Reset Management */ - void __iomem *cm; /* Clock Management */ - void __iomem *cm2; - void __iomem *prcm_mpu; -}; - -void omap2_set_globals_242x(void); -void omap2_set_globals_243x(void); -void omap2_set_globals_3xxx(void); -void omap2_set_globals_443x(void); -void omap2_set_globals_5xxx(void); -void omap2_set_globals_ti81xx(void); -void omap2_set_globals_am33xx(void); - -/* These get called from omap2_set_globals_xxxx(), do not call these */ -void omap2_set_globals_tap(struct omap_globals *); -#if defined(CONFIG_SOC_HAS_OMAP2_SDRC) -void omap2_set_globals_sdrc(struct omap_globals *); +#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) +void omap2xxx_restart(char mode, const char *cmd); +#else +static inline void omap2xxx_restart(char mode, const char *cmd) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 +void omap3xxx_restart(char mode, const char *cmd); +#else +static inline void omap3xxx_restart(char mode, const char *cmd) +{ +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +void omap44xx_restart(char mode, const char *cmd); #else -static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals) -{ } +static inline void omap44xx_restart(char mode, const char *cmd) +{ +} #endif -void omap2_set_globals_control(struct omap_globals *); -void omap2_set_globals_prcm(struct omap_globals *); - -void omap242x_map_io(void); -void omap243x_map_io(void); -void omap3_map_io(void); -void am33xx_map_io(void); -void omap4_map_io(void); -void omap5_map_io(void); -void ti81xx_map_io(void); + +/* This gets called from mach-omap2/io.c, do not call this */ +void __init omap2_set_globals_tap(u32 class, void __iomem *tap); + +void __init omap242x_map_io(void); +void __init omap243x_map_io(void); +void __init omap3_map_io(void); +void __init am33xx_map_io(void); +void __init omap4_map_io(void); +void __init omap5_map_io(void); +void __init ti81xx_map_io(void); + +/* omap_barriers_init() is OMAP4 only */ void omap_barriers_init(void); /** @@ -275,6 +214,9 @@ static inline void __iomem *omap4_get_scu_base(void) #endif extern void __init gic_init_irq(void); +extern void gic_dist_disable(void); +extern bool gic_dist_disabled(void); +extern void gic_timer_retrigger(void); extern void omap_smc1(u32 fn, u32 arg); extern void __iomem *omap4_get_sar_ram_base(void); extern void omap_do_wfi(void); @@ -282,6 +224,7 @@ extern void omap_do_wfi(void); #ifdef CONFIG_SMP /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern void omap_secondary_startup_4460(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); extern u32 omap_read_auxcoreboot0(void); @@ -338,6 +281,10 @@ extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); struct omap2_hsmmc_info; extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); +extern void omap_reserve(void); + +struct omap_hwmod; +extern int omap_dss_reset(struct omap_hwmod *); #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index d1ff8399a222..2adb2683f074 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -1,7 +1,7 @@ /* * OMAP2/3 System Control Module register access * - * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007, 2012 Texas Instruments, Inc. * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley @@ -15,15 +15,13 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/sdrc.h> - #include "soc.h" #include "iomap.h" #include "common.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" -#include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" +#include "prm3xxx.h" +#include "cm3xxx.h" #include "sdrc.h" #include "pm.h" #include "control.h" @@ -149,13 +147,11 @@ static struct omap3_control_regs control_context; #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg)) #define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg)) -void __init omap2_set_globals_control(struct omap_globals *omap2_globals) +void __init omap2_set_globals_control(void __iomem *ctrl, + void __iomem *ctrl_pad) { - if (omap2_globals->ctrl) - omap2_ctrl_base = omap2_globals->ctrl; - - if (omap2_globals->ctrl_pad) - omap4_ctrl_pad_base = omap2_globals->ctrl_pad; + omap2_ctrl_base = ctrl; + omap4_ctrl_pad_base = ctrl_pad; } void __iomem *omap_ctrl_base_get(void) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a89e8256fd0e..4ca8747b3cc9 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -414,6 +414,8 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); +extern void omap2_set_globals_control(void __iomem *ctrl, + void __iomem *ctrl_pad); #else #define omap_ctrl_base_get() 0 #define omap_ctrl_readb(x) 0 diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index bc2756959be5..bca7a8885703 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -27,7 +27,6 @@ #include <linux/export.h> #include <linux/cpu_pm.h> -#include <plat/prcm.h> #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c72b5a727720..3cff7dc514df 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -24,10 +24,11 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> +#include <plat-omap/dma-omap.h> + #include "iomap.h" -#include <plat/dma.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "omap4-keypad.h" #include "soc.h" @@ -35,6 +36,7 @@ #include "mux.h" #include "control.h" #include "devices.h" +#include "dma.h" #define L3_MODULES_MAX_LEN 12 #define L3_MODULES 3 @@ -127,7 +129,7 @@ static struct platform_device omap2cam_device = { #if defined(CONFIG_IOMMU_API) -#include <plat/iommu.h> +#include <linux/platform_data/iommu-omap.h> static struct resource omap3isp_resources[] = { { @@ -723,29 +725,3 @@ static int __init omap2_init_devices(void) return 0; } arch_initcall(omap2_init_devices); - -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -static int __init omap_init_wdt(void) -{ - int id = -1; - struct platform_device *pdev; - struct omap_hwmod *oh; - char *oh_name = "wd_timer2"; - char *dev_name = "omap_wdt"; - - if (!cpu_class_is_omap2() || of_have_populated_dt()) - return 0; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up wd_timer%d hwmod\n", id); - return -EINVAL; - } - - pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0); - WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", - dev_name, oh->name); - return 0; -} -subsys_initcall(omap_init_wdt); -#endif diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 1011995f150a..38ba58c97628 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -25,15 +25,17 @@ #include <linux/delay.h> #include <video/omapdss.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" #include "common.h" +#include "soc.h" #include "iomap.h" #include "mux.h" #include "control.h" #include "display.h" +#include "prm.h" #define DISPC_CONTROL 0x0040 #define DISPC_CONTROL2 0x0238 @@ -284,6 +286,35 @@ err: return ERR_PTR(r); } +static enum omapdss_version __init omap_display_get_version(void) +{ + if (cpu_is_omap24xx()) + return OMAPDSS_VER_OMAP24xx; + else if (cpu_is_omap3630()) + return OMAPDSS_VER_OMAP3630; + else if (cpu_is_omap34xx()) { + if (soc_is_am35xx()) { + return OMAPDSS_VER_AM35xx; + } else { + if (omap_rev() < OMAP3430_REV_ES3_0) + return OMAPDSS_VER_OMAP34xx_ES1; + else + return OMAPDSS_VER_OMAP34xx_ES3; + } + } else if (omap_rev() == OMAP4430_REV_ES1_0) + return OMAPDSS_VER_OMAP4430_ES1; + else if (omap_rev() == OMAP4430_REV_ES2_0 || + omap_rev() == OMAP4430_REV_ES2_1 || + omap_rev() == OMAP4430_REV_ES2_2) + return OMAPDSS_VER_OMAP4430_ES2; + else if (cpu_is_omap44xx()) + return OMAPDSS_VER_OMAP4; + else if (soc_is_omap54xx()) + return OMAPDSS_VER_OMAP5; + else + return OMAPDSS_VER_UNKNOWN; +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; @@ -291,9 +322,18 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) int i, oh_count; const struct omap_dss_hwmod_data *curr_dss_hwmod; struct platform_device *dss_pdev; + enum omapdss_version ver; /* create omapdss device */ + ver = omap_display_get_version(); + + if (ver == OMAPDSS_VER_UNKNOWN) { + pr_err("DSS not supported on this SoC\n"); + return -ENODEV; + } + + board_data->version = ver; board_data->dsi_enable_pads = omap_dsi_enable_pads; board_data->dsi_disable_pads = omap_dsi_disable_pads; board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count; @@ -473,7 +513,6 @@ static void dispc_disable_outputs(void) } } -#define MAX_MODULE_SOFTRESET_WAIT 10000 int omap_dss_reset(struct omap_hwmod *oh) { struct omap_hwmod_opt_clk *oc; diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index ff75abe60af2..e5aba58da5d2 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,9 +28,11 @@ #include <linux/init.h> #include <linux/device.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> + +#include "soc.h" +#include "omap_hwmod.h" +#include "omap_device.h" #define OMAP2_DMA_STRIDE 0x60 @@ -274,6 +276,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return -ENOMEM; } + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + d->dev_caps |= HS_CHANNELS_RESERVED; + /* Check the capabilities register for descriptor loading feature */ if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS) dma_common_ch_end = CCDN; diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h new file mode 100644 index 000000000000..eba80dbc5218 --- /dev/null +++ b/arch/arm/mach-omap2/dma.h @@ -0,0 +1,131 @@ +/* + * OMAP2PLUS DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP2PLUS_DMA_CHANNEL_H +#define __OMAP2PLUS_DMA_CHANNEL_H + + +/* DMA channels for 24xx */ +#define OMAP24XX_DMA_NO_DEVICE 0 +#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ +#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ +#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ +#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ +#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ +#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ +#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ +#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ +#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ +#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ +#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ +#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ +#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ +#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ +#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ +#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ +#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ +#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ +#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ +#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ +#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ +#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ +#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ +#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ +#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ +#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ +#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ +#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ +#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ +#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ +#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ +#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ +#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ +#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ +#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ +#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ +#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ +#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ +#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ +#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ +#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ +#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ +#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ +#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ +#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ +#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ +#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ +#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ +#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ +#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ +#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ +#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ +#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ +#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ +#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ +#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ +#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ + +#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ +#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + +#endif /* __OMAP2PLUS_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 814e1808e158..eacf51f2bc27 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -28,8 +28,6 @@ #include <linux/bitops.h> #include <linux/clkdev.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 09d0ccccb861..5854da168a9c 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -15,8 +15,6 @@ #include <linux/io.h> #include <linux/bitops.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock44xx.h" diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 72e0f01b715c..fce5aa3fff49 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -23,15 +23,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/omap_drm.h> -#include <plat/omap_device.h> -#include <plat/omap_hwmod.h> +#include "omap_device.h" +#include "omap_hwmod.h" +#include <plat/cpu.h> #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) +static struct omap_drm_platform_data platform_data; + static struct platform_device omap_drm_device = { .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &platform_data, }, .name = "omapdrm", .id = 0, @@ -52,6 +57,8 @@ static int __init omap_init_drm(void) oh->name); } + platform_data.omaprev = GET_OMAP_REVISION(); + return platform_device_register(&omap_drm_device); } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 98388109f22a..b155500e84a8 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -27,7 +27,7 @@ #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS -#include <plat/omap-pm.h> +#include "omap-pm.h" #endif #include <linux/platform_data/dsp-omap.h> diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c new file mode 100644 index 000000000000..679a0478644f --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.c @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2012 Texas Instruments, Inc.. + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> + +#include <video/omapdss.h> +#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-nokia-dsi.h> +#include <video/omap-panel-picodlp.h> + +#include <plat/cpu.h> + +#include "dss-common.h" +#include "mux.h" + +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ + +/* Display DVI */ +#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 + +/* Using generic display panel */ +static struct tfp410_platform_data omap4_dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, +}; + +static struct omap_dss_device omap4_panda_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "tfp410", + .data = &omap4_dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device omap4_panda_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, +}; + +static struct omap_dss_device *omap4_panda_dss_devices[] = { + &omap4_panda_dvi_device, + &omap4_panda_hdmi_device, +}; + +static struct omap_dss_board_info omap4_panda_dss_data = { + .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), + .devices = omap4_panda_dss_devices, + .default_device = &omap4_panda_dvi_device, +}; + +void __init omap4_panda_display_init(void) +{ + omap_display_init(&omap4_panda_dss_data); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap4_panda_display_init_of(void) +{ + omap_display_init(&omap4_panda_dss_data); +} + + +/* OMAP4 Blaze display data */ + +#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ +#define DLP_POWER_ON_GPIO 40 + +static struct nokia_dsi_panel_data dsi1_panel = { + .name = "taal", + .reset_gpio = 102, + .use_ext_te = false, + .ext_te_gpio = 101, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd_device = { + .name = "lcd", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi1_panel, + .phy.dsi = { + .module = 0, + }, + .channel = OMAP_DSS_CHANNEL_LCD, +}; + +static struct nokia_dsi_panel_data dsi2_panel = { + .name = "taal", + .reset_gpio = 104, + .use_ext_te = false, + .ext_te_gpio = 103, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd2_device = { + .name = "lcd2", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi2_panel, + .phy.dsi = { + + .module = 1, + }, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device sdp4430_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, +}; + +static struct picodlp_panel_data sdp4430_picodlp_pdata = { + .picodlp_adapter_id = 2, + .emu_done_gpio = 44, + .pwrgood_gpio = 45, +}; + +static void sdp4430_picodlp_init(void) +{ + int r; + const struct gpio picodlp_gpios[] = { + {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"}, + {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, + "DLP EMU DONE"}, + {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, + "DLP PWRGOOD"}, + }; + + r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); + if (r) + pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); +} + +static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DISPLAY_SEL_GPIO, 0); + gpio_set_value(DLP_POWER_ON_GPIO, 1); + + return 0; +} + +static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DLP_POWER_ON_GPIO, 0); + gpio_set_value(DISPLAY_SEL_GPIO, 1); +} + +static struct omap_dss_device sdp4430_picodlp_device = { + .name = "picodlp", + .driver_name = "picodlp_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .channel = OMAP_DSS_CHANNEL_LCD2, + .platform_enable = sdp4430_panel_enable_picodlp, + .platform_disable = sdp4430_panel_disable_picodlp, + .data = &sdp4430_picodlp_pdata, +}; + +static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_lcd_device, + &sdp4430_lcd2_device, + &sdp4430_hdmi_device, + &sdp4430_picodlp_device, +}; + +static struct omap_dss_board_info sdp4430_dss_data = { + .num_devices = ARRAY_SIZE(sdp4430_dss_devices), + .devices = sdp4430_dss_devices, + .default_device = &sdp4430_lcd_device, +}; + +void __init omap_4430sdp_display_init(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap_4430sdp_display_init_of(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); +} diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h new file mode 100644 index 000000000000..915f6fff5106 --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.h @@ -0,0 +1,14 @@ +#ifndef __OMAP_DSS_COMMON__ +#define __OMAP_DSS_COMMON__ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +void __init omap4_panda_display_init(void); +void __init omap4_panda_display_init_of(void); +void __init omap_4430sdp_display_init(void); +void __init omap_4430sdp_display_init_of(void); + +#endif diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index d1058f16fb40..399acabc3d0b 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -23,9 +23,9 @@ #include <linux/of.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4acf497faeb3..8607735b3ab3 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -17,9 +17,12 @@ #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-nand.h" + +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 static struct resource gpmc_nand_resource[] = { { @@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) +static int omap2_nand_gpmc_retime( + struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { struct gpmc_timings t; int err; - if (!gpmc_nand_data->gpmc_t) - return 0; - memset(&t, 0, sizeof(t)); - t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk; - t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); - t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on); + t.sync_clk = gpmc_t->sync_clk; + t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on); + t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on); /* Read */ - t.adv_rd_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_rd_off); + t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off); t.oe_on = t.adv_on; - t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access); - t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off); - t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off); - t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle); + t.access = gpmc_round_ns_to_ticks(gpmc_t->access); + t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off); + t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off); + t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle); /* Write */ - t.adv_wr_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_wr_off); + t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off); t.we_on = t.oe_on; if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_data_mux_bus); - t.wr_access = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_access); + t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus); + t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access); } - t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off); - t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off); - t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle); + t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off); + t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off); + t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle); /* Configure GPMC */ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) @@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data return 0; } -int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) +static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) +{ + /* support only OMAP3 class */ + if (!cpu_is_omap34xx()) { + pr_err("BCH ecc is not supported on this CPU\n"); + return 0; + } + + /* + * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. + * Other chips may be added if confirmed to work. + */ + if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && + (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { + pr_err("BCH 4-bit mode is not supported on this CPU\n"); + return 0; + } + + return 1; +} + +int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { int err = 0; struct device *dev = &gpmc_nand_device.dev; @@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); gpmc_nand_resource[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); - /* Set timings in GPMC */ - err = omap2_nand_gpmc_retime(gpmc_nand_data); - if (err < 0) { - dev_err(dev, "Unable to set gpmc timings: %d\n", err); - return err; + + if (gpmc_t) { + err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); + if (err < 0) { + dev_err(dev, "Unable to set gpmc timings: %d\n", err); + return err; + } } /* Enable RD PIN Monitoring Reg */ @@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); + if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) + return -EINVAL; + err = platform_device_register(&gpmc_nand_device); if (err < 0) { dev_err(dev, "Unable to register NAND device\n"); diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h new file mode 100644 index 000000000000..d59e1281e851 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-nand.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-omap2/gpmc-nand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_NAND_H +#define __OMAP2_GPMC_NAND_H + +#include "gpmc.h" +#include <linux/platform_data/mtd-nand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) +extern int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 916716e1da3b..d102183ed9a5 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -16,15 +16,25 @@ #include <linux/mtd/onenand_regs.h> #include <linux/io.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/err.h> #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-onenand.h" #define ONENAND_IO_SIZE SZ_128K +#define ONENAND_FLAG_SYNCREAD (1 << 0) +#define ONENAND_FLAG_SYNCWRITE (1 << 1) +#define ONENAND_FLAG_HF (1 << 2) +#define ONENAND_FLAG_VHF (1 << 3) + +static unsigned onenand_flags; +static unsigned latency; +static int fclk_offset; + static struct omap_onenand_platform_data *gpmc_onenand_data; static struct resource gpmc_onenand_resource = { @@ -38,11 +48,9 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) +static struct gpmc_timings omap2_onenand_calc_async_timings(void) { struct gpmc_timings t; - u32 reg; - int err; const int t_cer = 15; const int t_avdp = 12; @@ -55,11 +63,6 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; - /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -86,25 +89,30 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + return t; +} + +static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) +{ /* Configure GPMC for asynchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static void omap2_onenand_set_async_mode(void __iomem *onenand_base) +{ + u32 reg; /* Ensure sync read and sync write are disabled */ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - - return 0; } -static void set_onenand_cfg(void __iomem *onenand_base, int latency, - int sync_read, int sync_write, int hf, int vhf) +static void set_onenand_cfg(void __iomem *onenand_base) { u32 reg; @@ -112,19 +120,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; - if (sync_read) + if (onenand_flags & ONENAND_FLAG_SYNCREAD) reg |= ONENAND_SYS_CFG1_SYNC_READ; else reg &= ~ONENAND_SYS_CFG1_SYNC_READ; - if (sync_write) + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) reg |= ONENAND_SYS_CFG1_SYNC_WRITE; else reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; - if (hf) + if (onenand_flags & ONENAND_FLAG_HF) reg |= ONENAND_SYS_CFG1_HF; else reg &= ~ONENAND_SYS_CFG1_HF; - if (vhf) + if (onenand_flags & ONENAND_FLAG_VHF) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; @@ -132,21 +140,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, } static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, bool *clk_dep) + void __iomem *onenand_base) { u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); - int freq = 0; - - if (cfg->get_freq) { - struct onenand_freq_info fi; - - fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID); - fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID); - fi.ver_id = ver; - freq = cfg->get_freq(&fi, clk_dep); - if (freq) - return freq; - } + int freq; switch ((ver >> 4) & 0xf) { case 0: @@ -172,9 +169,9 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, - int *freq_ptr) +static struct gpmc_timings +omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, + int freq) { struct gpmc_timings t; const int t_cer = 15; @@ -184,29 +181,15 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, const int t_wpl = 40; const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; - int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; - int err, ticks_cez; - int cs = cfg->cs, freq = *freq_ptr; u32 reg; - bool clk_dep = false; + int div, fclk_offset_ns, gpmc_clk_ns; + int ticks_cez; + int cs = cfg->cs; - if (cfg->flags & ONENAND_SYNC_READ) { - sync_read = 1; - } else if (cfg->flags & ONENAND_SYNC_READWRITE) { - sync_read = 1; - sync_write = 1; - } else - return omap2_onenand_set_async_mode(cs, onenand_base); - - if (!freq) { - /* Very first call freq is not known */ - err = omap2_onenand_set_async_mode(cs, onenand_base); - if (err) - return err; - freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep); - first_time = 1; - } + if (cfg->flags & ONENAND_SYNC_READ) + onenand_flags = ONENAND_FLAG_SYNCREAD; + else if (cfg->flags & ONENAND_SYNC_READWRITE) + onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { case 104: @@ -244,44 +227,31 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, t_ach = 9; t_aavdh = 7; t_rdyo = 15; - sync_write = 0; + onenand_flags &= ~ONENAND_FLAG_SYNCWRITE; break; } - div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); + div = gpmc_calc_divider(min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ - hf = 1; + onenand_flags |= ONENAND_FLAG_HF; + else + onenand_flags &= ~ONENAND_FLAG_HF; if (gpmc_clk_ns < 12) /* >83Mhz */ - vhf = 1; - if (vhf) + onenand_flags |= ONENAND_FLAG_VHF; + else + onenand_flags &= ~ONENAND_FLAG_VHF; + if (onenand_flags & ONENAND_FLAG_VHF) latency = 8; - else if (hf) + else if (onenand_flags & ONENAND_FLAG_HF) latency = 6; else if (gpmc_clk_ns >= 25) /* 40 MHz*/ latency = 3; else latency = 4; - if (clk_dep) { - if (gpmc_clk_ns < 12) { /* >83Mhz */ - t_ces = 3; - t_avds = 4; - } else if (gpmc_clk_ns < 15) { /* >66Mhz */ - t_ces = 5; - t_avds = 4; - } else if (gpmc_clk_ns < 25) { /* >40Mhz */ - t_ces = 6; - t_avds = 5; - } else { - t_ces = 7; - t_avds = 7; - } - } - - if (first_time) - set_onenand_cfg(onenand_base, latency, - sync_read, sync_write, hf, vhf); + /* Set synchronous read timings */ + memset(&t, 0, sizeof(t)); if (div == 1) { reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); @@ -307,8 +277,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); } - /* Set synchronous read timings */ - memset(&t, 0, sizeof(t)); t.sync_clk = min_gpmc_clk_period; t.cs_on = 0; t.adv_on = 0; @@ -330,7 +298,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, ticks_cez); /* Write */ - if (sync_write) { + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { t.adv_wr_off = t.adv_rd_off; t.we_on = 0; t.we_off = t.cs_rd_off; @@ -355,6 +323,14 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } } + return t; +} + +static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) +{ + unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; + unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; + /* Configure GPMC for synchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_WRAPBURST_SUPP | @@ -371,11 +347,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, GPMC_CONFIG1_DEVICETYPE_NOR | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static int omap2_onenand_setup_async(void __iomem *onenand_base) +{ + struct gpmc_timings t; + int ret; + + omap2_onenand_set_async_mode(onenand_base); - set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); + t = omap2_onenand_calc_async_timings(); + + ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + omap2_onenand_set_async_mode(onenand_base); + + return 0; +} + +static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) +{ + int ret, freq = *freq_ptr; + struct gpmc_timings t; + + if (!freq) { + /* Very first call freq is not known */ + freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); + set_onenand_cfg(onenand_base); + } + + t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + + ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + set_onenand_cfg(onenand_base); *freq_ptr = freq; @@ -385,15 +395,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) { struct device *dev = &gpmc_onenand_device.dev; + unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE; + int ret; - /* Set sync timings in GPMC */ - if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, - freq_ptr) < 0) { - dev_err(dev, "Unable to set synchronous mode\n"); - return -EINVAL; + ret = omap2_onenand_setup_async(onenand_base); + if (ret) { + dev_err(dev, "unable to set to async mode\n"); + return ret; } - return 0; + if (!(gpmc_onenand_data->flags & l)) + return 0; + + ret = omap2_onenand_setup_sync(onenand_base, freq_ptr); + if (ret) + dev_err(dev, "unable to set to sync mode\n"); + return ret; } void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) @@ -411,6 +428,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } + if (cpu_is_omap34xx()) + gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX; + else + gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX; + err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h new file mode 100644 index 000000000000..216f23a8b45c --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-omap2/gpmc-onenand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_ONENAND_H +#define __OMAP2_GPMC_ONENAND_H + +#include <linux/platform_data/mtd-onenand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); +#else +#define board_onenand_data NULL +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 565475310374..6eed907d594c 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include "soc.h" diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 249a0b440cd6..ef990118d32b 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/smsc911x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" static struct resource gpmc_smsc911x_resources[] = { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 92b5718fa722..bf6117c32f4b 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,16 +26,14 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/mach-types.h> -#include <plat/gpmc.h> +#include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/cpu.h> -#include <plat/gpmc.h> -#include <plat/sdrc.h> -#include <plat/omap_device.h> +#include <asm/mach-types.h> #include "soc.h" #include "common.h" +#include "omap_device.h" +#include "gpmc.h" #define DEVICE_NAME "omap-gpmc" @@ -59,6 +57,9 @@ #define GPMC_ECC_SIZE_CONFIG 0x1fc #define GPMC_ECC1_RESULT 0x200 #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -75,6 +76,7 @@ #define GPMC_CS0_OFFSET 0x60 #define GPMC_CS_SIZE 0x30 +#define GPMC_BCH_SIZE 0x10 #define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF @@ -137,7 +139,6 @@ static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ -static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -158,22 +159,6 @@ static u32 gpmc_read_reg(int idx) return __raw_readl(gpmc_base + idx); } -static void gpmc_cs_write_byte(int cs, int idx, u8 val) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - __raw_writeb(val, reg_addr); -} - -static u8 gpmc_cs_read_byte(int cs, int idx) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return __raw_readb(reg_addr); -} - void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; @@ -288,7 +273,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, return -1 #endif -int gpmc_cs_calc_divider(int cs, unsigned int sync_clk) +int gpmc_calc_divider(unsigned int sync_clk) { int div; u32 l; @@ -308,7 +293,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) int div; u32 l; - div = gpmc_cs_calc_divider(cs, t->sync_clk); + div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; @@ -509,44 +494,6 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_read_status - read access request to get the different gpmc status - * @cmd: command type - * @return status - */ -int gpmc_read_status(int cmd) -{ - int status = -EINVAL; - u32 regval = 0; - - switch (cmd) { - case GPMC_GET_IRQ_STATUS: - status = gpmc_read_reg(GPMC_IRQSTATUS); - break; - - case GPMC_PREFETCH_FIFO_CNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval); - break; - - case GPMC_PREFETCH_COUNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_COUNT(regval); - break; - - case GPMC_STATUS_BUFFER: - regval = gpmc_read_reg(GPMC_STATUS); - /* 1 : buffer is available to write */ - status = regval & GPMC_STATUS_BUFF_EMPTY; - break; - - default: - printk(KERN_ERR "gpmc_read_status: Not supported\n"); - } - return status; -} -EXPORT_SYMBOL(gpmc_read_status); - -/** * gpmc_cs_configure - write request to configure gpmc * @cs: chip select number * @cmd: command type @@ -614,121 +561,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval) } EXPORT_SYMBOL(gpmc_cs_configure); -/** - * gpmc_nand_read - nand specific read access request - * @cs: chip select number - * @cmd: command type - */ -int gpmc_nand_read(int cs, int cmd) -{ - int rval = -EINVAL; - - switch (cmd) { - case GPMC_NAND_DATA: - rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA); - break; - - default: - printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n"); - } - return rval; -} -EXPORT_SYMBOL(gpmc_nand_read); - -/** - * gpmc_nand_write - nand specific write request - * @cs: chip select number - * @cmd: command type - * @wval: value to write - */ -int gpmc_nand_write(int cs, int cmd, int wval) -{ - int err = 0; - - switch (cmd) { - case GPMC_NAND_COMMAND: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval); - break; - - case GPMC_NAND_ADDRESS: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval); - break; - - case GPMC_NAND_DATA: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval); - - default: - printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n"); - err = -EINVAL; - } - return err; -} -EXPORT_SYMBOL(gpmc_nand_write); - - - -/** - * gpmc_prefetch_enable - configures and starts prefetch transfer - * @cs: cs (chip select) number - * @fifo_th: fifo threshold to be used for read/ write - * @dma_mode: dma mode enable (1) or disable (0) - * @u32_count: number of bytes to be transferred - * @is_write: prefetch read(0) or write post(1) mode - */ -int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write) -{ - - if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) { - pr_err("gpmc: fifo threshold is not supported\n"); - return -1; - } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { - /* Set the amount of bytes to be prefetched */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count); - - /* Set dma/mpu mode, the prefetch read / post write and - * enable the engine. Set which cs is has requested for. - */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | - PREFETCH_FIFOTHRESHOLD(fifo_th) | - ENABLE_PREFETCH | - (dma_mode << DMA_MPU_MODE) | - (0x1 & is_write))); - - /* Start the prefetch engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); - } else { - return -EBUSY; - } - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_enable); - -/** - * gpmc_prefetch_reset - disables and stops the prefetch engine - */ -int gpmc_prefetch_reset(int cs) -{ - u32 config1; - - /* check if the same module/cs is trying to reset */ - config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); - if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs) - return -EINVAL; - - /* Stop the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0); - - /* Reset/disable the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0); - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_reset); - void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { + int i; + reg->gpmc_status = gpmc_base + GPMC_STATUS; reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; @@ -744,7 +580,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; - reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; + + for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) { + reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + + GPMC_BCH_SIZE * i; + } } int gpmc_get_client_irq(unsigned irq_config) @@ -1093,267 +939,3 @@ void omap3_gpmc_restore_context(void) } } #endif /* CONFIG_ARCH_OMAP3 */ - -/** - * gpmc_enable_hwecc - enable hardware ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @ecc_size: bytes for which ECC will be generated - */ -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) -{ - unsigned int val; - - /* check if ecc module is in used */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - - /* program ecc and result sizes */ - val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F)); - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val); - - switch (mode) { - case GPMC_ECC_READ: - case GPMC_ECC_WRITE: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - break; - case GPMC_ECC_READSYN: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCDISABLE); - break; - default: - printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode); - break; - } - - /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ - val = (dev_width << 7) | (cs << 1) | (0x1); - gpmc_write_reg(GPMC_ECC_CONFIG, val); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); - -/** - * gpmc_calculate_ecc - generate non-inverted ecc bytes - * @cs: chip select number - * @dat: data pointer over which ecc is computed - * @ecc_code: ecc code buffer - * - * Using non-inverted ECC is considered ugly since writing a blank - * page (padding) will clear the ECC bytes. This is not a problem as long - * no one is trying to write data on the seemingly unused page. Reading - * an erased page will produce an ECC mismatch between generated and read - * ECC bytes that has to be dealt with separately. - */ -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) -{ - unsigned int val = 0x0; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - /* read ecc result */ - val = gpmc_read_reg(GPMC_ECC1_RESULT); - *ecc_code++ = val; /* P128e, ..., P1e */ - *ecc_code++ = val >> 16; /* P128o, ..., P1o */ - /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ - *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); - -#ifdef CONFIG_ARCH_OMAP3 - -/** - * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality - * @cs: chip select number - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - * - * This function must be executed before any call to gpmc_enable_hwecc_bch. - */ -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors) -{ - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - /* support only OMAP3 class */ - if (!cpu_is_omap34xx()) { - printk(KERN_ERR "BCH ecc is not supported on this CPU\n"); - return -EINVAL; - } - - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. - * Other chips may be added if confirmed to work. - */ - if ((nerrors == 4) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { - printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n"); - return -EINVAL; - } - - /* sanity check */ - if (nsectors > 8) { - printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n", - nsectors); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch); - -/** - * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - */ -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors) -{ - unsigned int val; - - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, 0x1); - - /* - * When using BCH, sector size is hardcoded to 512 bytes. - * Here we are using wrapping mode 6 both for reading and writing, with: - * size0 = 0 (no additional protected byte in spare area) - * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) - */ - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12)); - - /* BCH configuration */ - val = ((1 << 16) | /* enable BCH */ - (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ - (0x06 << 8) | /* wrap mode = 6 */ - (dev_width << 7) | /* bus width */ - (((nsectors-1) & 0x7) << 4) | /* number of sectors */ - (cs << 1) | /* ECC CS */ - (0x1)); /* enable ECC */ - - gpmc_write_reg(GPMC_ECC_CONFIG, val); - gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch); - -/** - * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs; and - * left-justify the resulting polynomial. - */ - *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF); - *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF); - *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); - *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF); - *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF); - *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF); - *ecc++ = 0x7f ^ ((val1 & 0xF) << 4); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4); - -/** - * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2, val3, val4; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - val3 = gpmc_read_reg(reg + 8); - val4 = gpmc_read_reg(reg + 12); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs. - */ - *ecc++ = 0xef ^ (val4 & 0xFF); - *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); - *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); - *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); - *ecc++ = 0xed ^ (val3 & 0xFF); - *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); - *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); - *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); - *ecc++ = 0x97 ^ (val2 & 0xFF); - *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); - *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); - *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); - *ecc++ = 0xb5 ^ (val1 & 0xFF); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8); - -#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/mach-omap2/gpmc.h index 2e6e2597178c..79f4dfc2adb3 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -11,6 +11,8 @@ #ifndef __OMAP2_GPMC_H #define __OMAP2_GPMC_H +#include <linux/platform_data/mtd-nand-omap2.h> + /* Maximum Number of Chip Selects */ #define GPMC_CS_NUM 8 @@ -32,15 +34,6 @@ #define GPMC_SET_IRQ_STATUS 0x00000004 #define GPMC_CONFIG_WP 0x00000005 -#define GPMC_GET_IRQ_STATUS 0x00000006 -#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */ -#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/ -#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */ - -#define GPMC_NAND_COMMAND 0x0000000a -#define GPMC_NAND_ADDRESS 0x0000000b -#define GPMC_NAND_DATA 0x0000000c - #define GPMC_ENABLE_IRQ 0x0000000d /* ECC commands */ @@ -76,25 +69,10 @@ #define GPMC_DEVICETYPE_NOR 0 #define GPMC_DEVICETYPE_NAND 2 #define GPMC_CONFIG_WRITEPROTECT 0x00000010 -#define GPMC_STATUS_BUFF_EMPTY 0x00000001 #define WR_RD_PIN_MONITORING 0x00600000 -#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) -#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 -#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 -#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) - -enum omap_ecc { - /* 1-bit ecc: stored at end of spare area */ - OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ - OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at beginning of spare area as romcode */ - OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ - OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ - OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ -}; /* * Note that all values in this struct are in nanoseconds except sync_clk @@ -133,22 +111,6 @@ struct gpmc_timings { u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; -struct gpmc_nand_regs { - void __iomem *gpmc_status; - void __iomem *gpmc_nand_command; - void __iomem *gpmc_nand_address; - void __iomem *gpmc_nand_data; - void __iomem *gpmc_prefetch_config1; - void __iomem *gpmc_prefetch_config2; - void __iomem *gpmc_prefetch_control; - void __iomem *gpmc_prefetch_status; - void __iomem *gpmc_ecc_config; - void __iomem *gpmc_ecc_control; - void __iomem *gpmc_ecc_size_config; - void __iomem *gpmc_ecc1_result; - void __iomem *gpmc_bch_result0; -}; - extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); @@ -160,31 +122,14 @@ extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); +extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); -extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write); -extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_read_status(int cmd); extern int gpmc_cs_configure(int cs, int cmd, int wval); -extern int gpmc_nand_read(int cs, int cmd); -extern int gpmc_nand_write(int cs, int cmd, int wval); - -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); - -#ifdef CONFIG_ARCH_OMAP3 -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors); -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors); -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc); -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc); -#endif /* CONFIG_ARCH_OMAP3 */ #endif diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index e003f2bba30c..ab7bf181a105 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -27,15 +27,13 @@ #include <linux/err.h> #include <linux/platform_device.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "hdq1w.h" +#include "prm.h" #include "common.h" -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /** * omap_hdq1w_reset - reset the OMAP HDQ1W module * @oh: struct omap_hwmod * diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h index 0c1efc846d8d..c7e08d2a7a46 100644 --- a/arch/arm/mach-omap2/hdq1w.h +++ b/arch/arm/mach-omap2/hdq1w.h @@ -21,7 +21,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H #define ARCH_ARM_MACH_OMAP2_HDQ1W_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" /* * XXX A future cleanup patch should modify diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 4d3a6324155f..4a964338992a 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,14 +14,14 @@ #include <linux/string.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/mmc.h> -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "soc.h" +#include "omap_device.h" +#include "omap-pm.h" #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 8763c8520dc2..1df9b5feda16 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -21,8 +21,8 @@ #include <linux/err.h> #include <linux/hwspinlock.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { .base_id = 0, diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index fc57e67b321f..fbb9b152cd5e 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -19,21 +19,23 @@ * */ -#include <plat/i2c.h> -#include "common.h" -#include <plat/omap_hwmod.h> +#include "soc.h" +#include "omap_hwmod.h" +#include "omap_device.h" +#include "prm.h" +#include "common.h" #include "mux.h" +#include "i2c.h" /* In register I2C_CON, Bit 15 is the I2C enable bit */ #define I2C_EN BIT(15) #define OMAP2_I2C_CON_OFFSET 0x24 #define OMAP4_I2C_CON_OFFSET 0xA4 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 +#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 -void __init omap2_i2c_mux_pins(int bus_id) +static void __init omap2_i2c_mux_pins(int bus_id) { char mux_name[sizeof("i2c2_scl.i2c2_scl")]; @@ -104,3 +106,62 @@ int omap_i2c_reset(struct omap_hwmod *oh) return 0; } + +static int __init omap_i2c_nr_ports(void) +{ + int ports = 0; + + if (cpu_is_omap24xx()) + ports = 2; + else if (cpu_is_omap34xx()) + ports = 3; + else if (cpu_is_omap44xx()) + ports = 4; + return ports; +} + +static const char name[] = "omap_i2c"; + +int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id) +{ + int l; + struct omap_hwmod *oh; + struct platform_device *pdev; + char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; + struct omap_i2c_bus_platform_data *pdata; + struct omap_i2c_dev_attr *dev_attr; + + if (bus_id > omap_i2c_nr_ports()) + return -EINVAL; + + omap2_i2c_mux_pins(bus_id); + + l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); + WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, + "String buffer overflow in I2C%d device setup\n", bus_id); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return -EEXIST; + } + + pdata = i2c_pdata; + /* + * pass the hwmod class's CPU-specific knowledge of I2C IP revision in + * use, and functionality implementation flags, up to the OMAP I2C + * driver via platform data + */ + pdata->rev = oh->class->rev; + + dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; + pdata->flags = dev_attr->flags; + + pdev = omap_device_build(name, bus_id, oh, pdata, + sizeof(struct omap_i2c_bus_platform_data), + NULL, 0, 0); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); + + return PTR_RET(pdev); +} + diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h new file mode 100644 index 000000000000..42b6f2e7d190 --- /dev/null +++ b/arch/arm/mach-omap2/i2c.h @@ -0,0 +1,42 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/i2c.h> + +#ifndef __MACH_OMAP2_I2C_H +#define __MACH_OMAP2_I2C_H + +/** + * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod + * @fifo_depth: total controller FIFO size (in bytes) + * @flags: differences in hardware support capability + * + * @fifo_depth represents what exists on the hardware, not what is + * actually configured at runtime by the device driver. + */ +struct omap_i2c_dev_attr { + u8 fifo_depth; + u32 flags; +}; + +int omap_i2c_reset(struct omap_hwmod *oh); + +#endif /* __MACH_OMAP2_I2C_H */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index cf2362ccb234..45cc7ed4dd58 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -28,6 +28,9 @@ #include "soc.h" #include "control.h" +#define OMAP4_SILICON_TYPE_STANDARD 0x01 +#define OMAP4_SILICON_TYPE_PERFORMANCE 0x02 + static unsigned int omap_revision; static const char *cpu_rev; u32 omap_features; @@ -273,25 +276,11 @@ void __init omap4xxx_check_features(void) { u32 si_type; - if (cpu_is_omap443x()) - omap_features |= OMAP4_HAS_MPU_1GHZ; - + si_type = + (read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03; - if (cpu_is_omap446x()) { - si_type = - read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1); - switch ((si_type & (3 << 16)) >> 16) { - case 2: - /* High performance device */ - omap_features |= OMAP4_HAS_MPU_1_5GHZ; - break; - case 1: - default: - /* Standard device */ - omap_features |= OMAP4_HAS_MPU_1_2GHZ; - break; - } - } + if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE) + omap_features = OMAP4_HAS_PERF_SILICON; } void __init ti81xx_check_features(void) @@ -559,11 +548,12 @@ void __init omap5xxx_check_revision(void) * detect the exact revision later on in omap2_detect_revision() once map_io * is done. */ -void __init omap2_set_globals_tap(struct omap_globals *omap2_globals) +void __init omap2_set_globals_tap(u32 class, void __iomem *tap) { - omap_revision = omap2_globals->class; - tap_base = omap2_globals->tap; + omap_revision = class; + tap_base = tap; + /* XXX What is this intended to do? */ if (cpu_is_omap34xx()) tap_prod_id = 0x0210; else diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 93d10de7129f..cfaed13d0040 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <plat/serial.h> +#include <mach/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h deleted file mode 100644 index 5621cc59c9f4..000000000000 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/gpio.h - */ diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/mach-omap2/include/mach/serial.h index 65fce44dce34..70eda00db7a4 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/mach-omap2/include/mach/serial.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/serial.h - * * Copyright (C) 2009 Texas Instruments * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> * @@ -10,11 +8,6 @@ * GNU General Public License for more details. */ -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include <linux/init.h> - /* * Memory entry used for the DEBUG_LL UART configuration, relative to * start of RAM. See also uncompress.h and debug-macro.S. @@ -29,11 +22,6 @@ */ #define OMAP_UART_INFO_OFS 0x3ffc -/* OMAP1 serial ports */ -#define OMAP1_UART1_BASE 0xfffb0000 -#define OMAP1_UART2_BASE 0xfffb0800 -#define OMAP1_UART3_BASE 0xfffb9800 - /* OMAP2 serial ports */ #define OMAP2_UART1_BASE 0x4806a000 #define OMAP2_UART2_BASE 0x4806c000 @@ -76,20 +64,14 @@ #define ZOOM_UART_VIRT 0xfa400000 #define OMAP_PORT_SHIFT 2 -#define OMAP7XX_PORT_SHIFT 0 #define ZOOM_PORT_SHIFT 1 -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) #define OMAP24XX_BASE_BAUD (48000000/16) /* * DEBUG_LL port encoding stored into the UART1 scratchpad register by * decomp_setup in uncompress.h */ -#define OMAP1UART1 11 -#define OMAP1UART2 12 -#define OMAP1UART3 13 #define OMAP2UART1 21 #define OMAP2UART2 22 #define OMAP2UART3 23 @@ -109,15 +91,6 @@ #define OMAP5UART4 OMAP4UART4 #define ZOOM_UART 95 /* Only on zoom2/3 */ -/* This is only used by 8250.c for omap1510 */ -#define is_omap_port(pt) ({int __ret = 0; \ - if ((pt)->port.mapbase == OMAP1_UART1_BASE || \ - (pt)->port.mapbase == OMAP1_UART2_BASE || \ - (pt)->port.mapbase == OMAP1_UART3_BASE) \ - __ret = 1; \ - __ret; \ - }) - #ifndef __ASSEMBLER__ struct omap_board_data; @@ -128,5 +101,3 @@ extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); extern void omap_serial_init_port(struct omap_board_data *bdata, struct omap_uart_port_info *platform_data); #endif - -#endif diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h index 78e0557bfd4e..8e3546d3e041 100644 --- a/arch/arm/mach-omap2/include/mach/uncompress.h +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -1,5 +1,176 @@ /* - * arch/arm/mach-omap2/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include <plat/uncompress.h> +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/memory.h> +#include <asm/mach-types.h> + +#include <mach/serial.h> + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP2(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP2UART##p) + +#define DEBUG_LL_OMAP3(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP3UART##p) + +#define DEBUG_LL_OMAP4(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP4UART##p) + +#define DEBUG_LL_OMAP5(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP5UART##p) +/* Zoom2/3 shift is different for UART1 and external port */ +#define DEBUG_LL_ZOOM(mach) \ + _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) + +#define DEBUG_LL_TI81XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + TI81XXUART##p) + +#define DEBUG_LL_AM33XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + AM33XXUART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap2 based boards using UART1 */ + DEBUG_LL_OMAP2(1, omap_2430sdp); + DEBUG_LL_OMAP2(1, omap_apollon); + DEBUG_LL_OMAP2(1, omap_h4); + + /* omap2 based boards using UART3 */ + DEBUG_LL_OMAP2(3, nokia_n800); + DEBUG_LL_OMAP2(3, nokia_n810); + DEBUG_LL_OMAP2(3, nokia_n810_wimax); + + /* omap3 based boards using UART1 */ + DEBUG_LL_OMAP2(1, omap3evm); + DEBUG_LL_OMAP3(1, omap_3430sdp); + DEBUG_LL_OMAP3(1, omap_3630sdp); + DEBUG_LL_OMAP3(1, omap3530_lv_som); + DEBUG_LL_OMAP3(1, omap3_torpedo); + + /* omap3 based boards using UART3 */ + DEBUG_LL_OMAP3(3, cm_t35); + DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, cm_t3730); + DEBUG_LL_OMAP3(3, craneboard); + DEBUG_LL_OMAP3(3, devkit8000); + DEBUG_LL_OMAP3(3, igep0020); + DEBUG_LL_OMAP3(3, igep0030); + DEBUG_LL_OMAP3(3, nokia_rm680); + DEBUG_LL_OMAP3(3, nokia_rm696); + DEBUG_LL_OMAP3(3, nokia_rx51); + DEBUG_LL_OMAP3(3, omap3517evm); + DEBUG_LL_OMAP3(3, omap3_beagle); + DEBUG_LL_OMAP3(3, omap3_pandora); + DEBUG_LL_OMAP3(3, omap_ldp); + DEBUG_LL_OMAP3(3, overo); + DEBUG_LL_OMAP3(3, touchbook); + + /* omap4 based boards using UART3 */ + DEBUG_LL_OMAP4(3, omap_4430sdp); + DEBUG_LL_OMAP4(3, omap4_panda); + + /* omap5 based boards using UART3 */ + DEBUG_LL_OMAP5(3, omap5_sevm); + + /* zoom2/3 external uart */ + DEBUG_LL_ZOOM(omap_zoom2); + DEBUG_LL_ZOOM(omap_zoom3); + + /* TI8168 base boards using UART3 */ + DEBUG_LL_TI81XX(3, ti8168evm); + + /* TI8148 base boards using UART1 */ + DEBUG_LL_TI81XX(1, ti8148evm); + + /* AM33XX base boards using UART1 */ + DEBUG_LL_AM33XX(1, am335xevm); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4234d28dc171..9df757644cce 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -25,14 +25,9 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <plat/sram.h> -#include <plat/sdrc.h> -#include <plat/serial.h> -#include <plat/omap-pm.h> -#include <plat/omap_hwmod.h> -#include <plat/multi.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "omap_hwmod.h" #include "soc.h" #include "iomap.h" #include "voltage.h" @@ -43,6 +38,18 @@ #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" +#include "omap-pm.h" +#include "sdrc.h" +#include "control.h" +#include "serial.h" +#include "sram.h" +#include "cm2xxx.h" +#include "cm3xxx.h" +#include "prm.h" +#include "cm.h" +#include "prcm_mpu44xx.h" +#include "prminst44xx.h" +#include "cminst44xx.h" /* * The machine specific code may provide the extra mapping besides the @@ -265,7 +272,7 @@ static struct map_desc omap54xx_io_desc[] __initdata = { #endif #ifdef CONFIG_SOC_OMAP2420 -void __init omap242x_map_common_io(void) +void __init omap242x_map_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); @@ -273,7 +280,7 @@ void __init omap242x_map_common_io(void) #endif #ifdef CONFIG_SOC_OMAP2430 -void __init omap243x_map_common_io(void) +void __init omap243x_map_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); @@ -281,28 +288,28 @@ void __init omap243x_map_common_io(void) #endif #ifdef CONFIG_ARCH_OMAP3 -void __init omap34xx_map_common_io(void) +void __init omap3_map_io(void) { iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); } #endif #ifdef CONFIG_SOC_TI81XX -void __init omapti81xx_map_common_io(void) +void __init ti81xx_map_io(void) { iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc)); } #endif #ifdef CONFIG_SOC_AM33XX -void __init omapam33xx_map_common_io(void) +void __init am33xx_map_io(void) { iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); } #endif #ifdef CONFIG_ARCH_OMAP4 -void __init omap44xx_map_common_io(void) +void __init omap4_map_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); omap_barriers_init(); @@ -310,7 +317,7 @@ void __init omap44xx_map_common_io(void) #endif #ifdef CONFIG_SOC_OMAP5 -void __init omap5_map_common_io(void) +void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); } @@ -354,11 +361,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -static void __init omap_common_init_early(void) -{ - omap_init_consistent_dma_size(); -} - static void __init omap_hwmod_init_postsetup(void) { u8 postsetup_state; @@ -377,9 +379,15 @@ static void __init omap_hwmod_init_postsetup(void) #ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { - omap2_set_globals_242x(); + omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL); omap2xxx_check_revision(); - omap_common_init_early(); + omap2xxx_cm_init(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); @@ -399,9 +407,15 @@ void __init omap2420_init_late(void) #ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { - omap2_set_globals_243x(); + omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL); omap2xxx_check_revision(); - omap_common_init_early(); + omap2xxx_cm_init(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); @@ -425,10 +439,16 @@ void __init omap2430_init_late(void) #ifdef CONFIG_ARCH_OMAP3 void __init omap3_init_early(void) { - omap2_set_globals_3xxx(); + omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL); omap3xxx_check_revision(); omap3xxx_check_features(); - omap_common_init_early(); + omap3xxx_cm_init(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -459,10 +479,14 @@ void __init am35xx_init_early(void) void __init ti81xx_init_early(void) { - omap2_set_globals_ti81xx(); + omap2_set_globals_tap(OMAP343X_CLASS, + OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -517,10 +541,14 @@ void __init ti81xx_init_late(void) #ifdef CONFIG_SOC_AM33XX void __init am33xx_init_early(void) { - omap2_set_globals_am33xx(); + omap2_set_globals_tap(AM335X_CLASS, + AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); + omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE)); + omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); am33xx_voltagedomains_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); @@ -533,10 +561,18 @@ void __init am33xx_init_early(void) #ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { - omap2_set_globals_443x(); + omap2_set_globals_tap(OMAP443X_CLASS, + OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE)); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE)); + omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE)); + omap_prm_base_init(); + omap_cm_base_init(); omap4xxx_check_revision(); omap4xxx_check_features(); - omap_common_init_early(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); @@ -556,9 +592,17 @@ void __init omap4430_init_late(void) #ifdef CONFIG_SOC_OMAP5 void __init omap5_init_early(void) { - omap2_set_globals_5xxx(); + omap2_set_globals_tap(OMAP54XX_CLASS, + OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE)); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), + OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE)); + omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); + omap_prm_base_init(); + omap_cm_base_init(); omap5xxx_check_revision(); - omap_common_init_early(); } #endif diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c deleted file mode 100644 index eefc37912ef3..000000000000 --- a/arch/arm/mach-omap2/iommu2.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * omap iommu: omap2/3 architecture specific functions - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, - * Paul Mundt and Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/err.h> -#include <linux/device.h> -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/stringify.h> - -#include <plat/iommu.h> - -/* - * omap2 architecture specific register bit definitions - */ -#define IOMMU_ARCH_VERSION 0x00000011 - -/* SYSCONF */ -#define MMU_SYS_IDLE_SHIFT 3 -#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT) - -#define MMU_SYS_SOFTRESET (1 << 1) -#define MMU_SYS_AUTOIDLE 1 - -/* SYSSTATUS */ -#define MMU_SYS_RESETDONE 1 - -/* IRQSTATUS & IRQENABLE */ -#define MMU_IRQ_MULTIHITFAULT (1 << 4) -#define MMU_IRQ_TABLEWALKFAULT (1 << 3) -#define MMU_IRQ_EMUMISS (1 << 2) -#define MMU_IRQ_TRANSLATIONFAULT (1 << 1) -#define MMU_IRQ_TLBMISS (1 << 0) - -#define __MMU_IRQ_FAULT \ - (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT) -#define MMU_IRQ_MASK \ - (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS) -#define MMU_IRQ_TWL_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT) -#define MMU_IRQ_TLB_MISS_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS) - -/* MMU_CNTL */ -#define MMU_CNTL_SHIFT 1 -#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT) -#define MMU_CNTL_EML_TLB (1 << 3) -#define MMU_CNTL_TWL_EN (1 << 2) -#define MMU_CNTL_MMU_EN (1 << 1) - -#define get_cam_va_mask(pgsz) \ - (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \ - ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \ - ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ - ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) - - -static void __iommu_set_twl(struct omap_iommu *obj, bool on) -{ - u32 l = iommu_read_reg(obj, MMU_CNTL); - - if (on) - iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE); - else - iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE); - - l &= ~MMU_CNTL_MASK; - if (on) - l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); - else - l |= (MMU_CNTL_MMU_EN); - - iommu_write_reg(obj, l, MMU_CNTL); -} - - -static int omap2_iommu_enable(struct omap_iommu *obj) -{ - u32 l, pa; - unsigned long timeout; - - if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) - return -EINVAL; - - pa = virt_to_phys(obj->iopgd); - if (!IS_ALIGNED(pa, SZ_16K)) - return -EINVAL; - - iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG); - - timeout = jiffies + msecs_to_jiffies(20); - do { - l = iommu_read_reg(obj, MMU_SYSSTATUS); - if (l & MMU_SYS_RESETDONE) - break; - } while (!time_after(jiffies, timeout)); - - if (!(l & MMU_SYS_RESETDONE)) { - dev_err(obj->dev, "can't take mmu out of reset\n"); - return -ENODEV; - } - - l = iommu_read_reg(obj, MMU_REVISION); - dev_info(obj->dev, "%s: version %d.%d\n", obj->name, - (l >> 4) & 0xf, l & 0xf); - - l = iommu_read_reg(obj, MMU_SYSCONFIG); - l &= ~MMU_SYS_IDLE_MASK; - l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); - iommu_write_reg(obj, l, MMU_SYSCONFIG); - - iommu_write_reg(obj, pa, MMU_TTB); - - __iommu_set_twl(obj, true); - - return 0; -} - -static void omap2_iommu_disable(struct omap_iommu *obj) -{ - u32 l = iommu_read_reg(obj, MMU_CNTL); - - l &= ~MMU_CNTL_MASK; - iommu_write_reg(obj, l, MMU_CNTL); - iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG); - - dev_dbg(obj->dev, "%s is shutting down\n", obj->name); -} - -static void omap2_iommu_set_twl(struct omap_iommu *obj, bool on) -{ - __iommu_set_twl(obj, false); -} - -static u32 omap2_iommu_fault_isr(struct omap_iommu *obj, u32 *ra) -{ - u32 stat, da; - u32 errs = 0; - - stat = iommu_read_reg(obj, MMU_IRQSTATUS); - stat &= MMU_IRQ_MASK; - if (!stat) { - *ra = 0; - return 0; - } - - da = iommu_read_reg(obj, MMU_FAULT_AD); - *ra = da; - - if (stat & MMU_IRQ_TLBMISS) - errs |= OMAP_IOMMU_ERR_TLB_MISS; - if (stat & MMU_IRQ_TRANSLATIONFAULT) - errs |= OMAP_IOMMU_ERR_TRANS_FAULT; - if (stat & MMU_IRQ_EMUMISS) - errs |= OMAP_IOMMU_ERR_EMU_MISS; - if (stat & MMU_IRQ_TABLEWALKFAULT) - errs |= OMAP_IOMMU_ERR_TBLWALK_FAULT; - if (stat & MMU_IRQ_MULTIHITFAULT) - errs |= OMAP_IOMMU_ERR_MULTIHIT_FAULT; - iommu_write_reg(obj, stat, MMU_IRQSTATUS); - - return errs; -} - -static void omap2_tlb_read_cr(struct omap_iommu *obj, struct cr_regs *cr) -{ - cr->cam = iommu_read_reg(obj, MMU_READ_CAM); - cr->ram = iommu_read_reg(obj, MMU_READ_RAM); -} - -static void omap2_tlb_load_cr(struct omap_iommu *obj, struct cr_regs *cr) -{ - iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); - iommu_write_reg(obj, cr->ram, MMU_RAM); -} - -static u32 omap2_cr_to_virt(struct cr_regs *cr) -{ - u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK; - u32 mask = get_cam_va_mask(cr->cam & page_size); - - return cr->cam & mask; -} - -static struct cr_regs *omap2_alloc_cr(struct omap_iommu *obj, - struct iotlb_entry *e) -{ - struct cr_regs *cr; - - if (e->da & ~(get_cam_va_mask(e->pgsz))) { - dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__, - e->da); - return ERR_PTR(-EINVAL); - } - - cr = kmalloc(sizeof(*cr), GFP_KERNEL); - if (!cr) - return ERR_PTR(-ENOMEM); - - cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid; - cr->ram = e->pa | e->endian | e->elsz | e->mixed; - - return cr; -} - -static inline int omap2_cr_valid(struct cr_regs *cr) -{ - return cr->cam & MMU_CAM_V; -} - -static u32 omap2_get_pte_attr(struct iotlb_entry *e) -{ - u32 attr; - - attr = e->mixed << 5; - attr |= e->endian; - attr |= e->elsz >> 3; - attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) || - (e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6); - return attr; -} - -static ssize_t -omap2_dump_cr(struct omap_iommu *obj, struct cr_regs *cr, char *buf) -{ - char *p = buf; - - /* FIXME: Need more detail analysis of cam/ram */ - p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram, - (cr->cam & MMU_CAM_P) ? 1 : 0); - - return p - buf; -} - -#define pr_reg(name) \ - do { \ - ssize_t bytes; \ - const char *str = "%20s: %08x\n"; \ - const int maxcol = 32; \ - bytes = snprintf(p, maxcol, str, __stringify(name), \ - iommu_read_reg(obj, MMU_##name)); \ - p += bytes; \ - len -= bytes; \ - if (len < maxcol) \ - goto out; \ - } while (0) - -static ssize_t -omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len) -{ - char *p = buf; - - pr_reg(REVISION); - pr_reg(SYSCONFIG); - pr_reg(SYSSTATUS); - pr_reg(IRQSTATUS); - pr_reg(IRQENABLE); - pr_reg(WALKING_ST); - pr_reg(CNTL); - pr_reg(FAULT_AD); - pr_reg(TTB); - pr_reg(LOCK); - pr_reg(LD_TLB); - pr_reg(CAM); - pr_reg(RAM); - pr_reg(GFLUSH); - pr_reg(FLUSH_ENTRY); - pr_reg(READ_CAM); - pr_reg(READ_RAM); - pr_reg(EMU_FAULT_AD); -out: - return p - buf; -} - -static void omap2_iommu_save_ctx(struct omap_iommu *obj) -{ - int i; - u32 *p = obj->ctx; - - for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { - p[i] = iommu_read_reg(obj, i * sizeof(u32)); - dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); - } - - BUG_ON(p[0] != IOMMU_ARCH_VERSION); -} - -static void omap2_iommu_restore_ctx(struct omap_iommu *obj) -{ - int i; - u32 *p = obj->ctx; - - for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { - iommu_write_reg(obj, p[i], i * sizeof(u32)); - dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); - } - - BUG_ON(p[0] != IOMMU_ARCH_VERSION); -} - -static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) -{ - e->da = cr->cam & MMU_CAM_VATAG_MASK; - e->pa = cr->ram & MMU_RAM_PADDR_MASK; - e->valid = cr->cam & MMU_CAM_V; - e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK; - e->endian = cr->ram & MMU_RAM_ENDIAN_MASK; - e->elsz = cr->ram & MMU_RAM_ELSZ_MASK; - e->mixed = cr->ram & MMU_RAM_MIXED; -} - -static const struct iommu_functions omap2_iommu_ops = { - .version = IOMMU_ARCH_VERSION, - - .enable = omap2_iommu_enable, - .disable = omap2_iommu_disable, - .set_twl = omap2_iommu_set_twl, - .fault_isr = omap2_iommu_fault_isr, - - .tlb_read_cr = omap2_tlb_read_cr, - .tlb_load_cr = omap2_tlb_load_cr, - - .cr_to_e = omap2_cr_to_e, - .cr_to_virt = omap2_cr_to_virt, - .alloc_cr = omap2_alloc_cr, - .cr_valid = omap2_cr_valid, - .dump_cr = omap2_dump_cr, - - .get_pte_attr = omap2_get_pte_attr, - - .save_ctx = omap2_iommu_save_ctx, - .restore_ctx = omap2_iommu_restore_ctx, - .dump_ctx = omap2_iommu_dump_ctx, -}; - -static int __init omap2_iommu_init(void) -{ - return omap_install_iommu_arch(&omap2_iommu_ops); -} -module_init(omap2_iommu_init); - -static void __exit omap2_iommu_exit(void) -{ - omap_uninstall_iommu_arch(&omap2_iommu_ops); -} -module_exit(omap2_iommu_exit); - -MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); -MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 37f8f948047b..bf496510eb5e 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -19,16 +19,17 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/platform_data/asoc-ti-mcbsp.h> - -#include <plat/dma.h> -#include <plat/omap_device.h> #include <linux/pm_runtime.h> +#include <plat-omap/dma-omap.h> + +#include "omap_device.h" + /* * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. * Sidetone needs non-gated ICLK and sidetone autoidle is broken. */ -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" static int omap3_enable_st_clock(unsigned int id, bool enable) diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h new file mode 100644 index 000000000000..0cd4b089da9c --- /dev/null +++ b/arch/arm/mach-omap2/mmc.h @@ -0,0 +1,23 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP24XX_NR_MMC 2 +#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE +#define OMAP2_MMC1_BASE 0x4809c000 + +#define OMAP4_MMC_REG_OFFSET 0x100 + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); +#else +static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) +{ +} +#endif + +struct omap_hwmod; +int omap_msdi_reset(struct omap_hwmod *oh); + +/* called from board-specific card detection service routine */ +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, + int is_closed); diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index 9e57b4aadb06..aafdd4ca9f4f 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -25,13 +25,13 @@ #include <linux/err.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/mmc.h> - +#include "prm.h" #include "common.h" #include "control.h" +#include "omap_hwmod.h" +#include "omap_device.h" #include "mux.h" +#include "mmc.h" /* * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register @@ -44,9 +44,6 @@ #define MSDI_CON_CLKD_MASK (0x3f << 0) #define MSDI_CON_CLKD_SHIFT 0 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */ #define MSDI_TARGET_RESET_CLKD 0x3ff diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 701e17cba468..26126343d6ac 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -36,8 +36,9 @@ #include <linux/interrupt.h> -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" +#include "soc.h" #include "control.h" #include "mux.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 502e3135aad3..0ea09faf327b 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,8 @@ #include <linux/linkage.h> #include <linux/init.h> +#include "omap44xx.h" + __CPUINIT /* Physical address needed since MMU not enabled yet on secondary core */ @@ -64,3 +66,39 @@ hold: ldr r12,=0x103 b secondary_startup ENDPROC(omap_secondary_startup) +ENTRY(omap_secondary_startup_4460) +hold_2: ldr r12,=0x103 + dsb + smc #0 @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 + bne hold_2 + + /* + * GIC distributor control register has changed between + * CortexA9 r1pX and r2pX. The Control Register secure + * banked version is now composed of 2 bits: + * bit 0 == Secure Enable + * bit 1 == Non-Secure Enable + * The Non-Secure banked register has not changed + * Because the ROM Code is based on the r1pX GIC, the CPU1 + * GIC restoration will cause a problem to CPU0 Non-Secure SW. + * The workaround must be: + * 1) Before doing the CPU1 wakeup, CPU0 must disable + * the GIC distributor + * 2) CPU1 must re-enable the GIC distributor on + * it's wakeup path. + */ + ldr r1, =OMAP44XX_GIC_DIST_BASE + ldr r0, [r1] + orr r0, #1 + str r0, [r1] + + /* + * we've been released from the wait loop,secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup +ENDPROC(omap_secondary_startup_4460) diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index df298d46707c..a6a4ff8744b7 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -13,7 +13,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <plat/iommu.h> +#include <linux/platform_data/iommu-omap.h> #include "soc.h" #include "common.h" diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index ff4e6a0e9c7c..aac46bfdbeb2 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -50,6 +50,7 @@ #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> +#include "soc.h" #include "common.h" #include "omap44xx.h" #include "omap4-sar-layout.h" @@ -67,6 +68,7 @@ struct omap4_cpu_pm_info { void __iomem *scu_sar_addr; void __iomem *wkup_sar_addr; void __iomem *l2x0_sar_addr; + void (*secondary_startup)(void); }; static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); @@ -299,6 +301,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { unsigned int cpu_state = 0; + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -308,7 +311,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) clear_cpu_prev_pwrst(cpu); set_cpu_next_pwrst(cpu, power_state); - set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup)); + set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); scu_pwrst_prepare(cpu, power_state); /* @@ -359,6 +362,11 @@ int __init omap4_mpuss_init(void) pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; + if (cpu_is_omap446x()) + pm_info->secondary_startup = omap_secondary_startup_4460; + else + pm_info->secondary_startup = omap_secondary_startup; + pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); if (!pm_info->pwrdm) { pr_err("Lookup failed for CPU1 pwrdm\n"); diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c index 9722f418ae1f..6a3be2bebddb 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/mach-omap2/omap-pm-noop.c @@ -22,9 +22,8 @@ #include <linux/device.h> #include <linux/platform_device.h> -/* Interface documentation is in mach/omap-pm.h */ -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "omap_device.h" +#include "omap-pm.h" static bool off_mode_enabled; static int dummy_context_loss_counter; diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h index 67faa7b8fe92..67faa7b8fe92 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/mach-omap2/omap-pm.h diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index e089e4d1ae38..b970440cffca 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -18,7 +18,6 @@ #include <asm/cacheflush.h> #include <asm/memblock.h> -#include <plat/omap-secure.h> #include "omap-secure.h" static phys_addr_t omap_secure_memblock_base; diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index c90a43589abe..0e729170c46b 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -52,6 +52,13 @@ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); extern u32 omap_smc2(u32 id, u32 falg, u32 pargs); extern phys_addr_t omap_secure_ram_mempool_base(void); +extern int omap_secure_ram_reserve_memblock(void); +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __ASSEMBLER__ */ #endif /* OMAP_ARCH_OMAP_SECURE_H */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4d05fa8a4e48..cd42d921940d 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -32,6 +32,7 @@ #include "iomap.h" #include "common.h" #include "clockdomain.h" +#include "pm.h" #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410FC090 @@ -39,6 +40,8 @@ #define OMAP5_CORE_COUNT 0x2 +u16 pm44xx_errata; + /* SCU base address */ static void __iomem *scu_base; @@ -118,8 +121,37 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * * 4.3.4.2 Power States of CPU0 and CPU1 */ if (booted) { + /* + * GIC distributor control register has changed between + * CortexA9 r1pX and r2pX. The Control Register secure + * banked version is now composed of 2 bits: + * bit 0 == Secure Enable + * bit 1 == Non-Secure Enable + * The Non-Secure banked register has not changed + * Because the ROM Code is based on the r1pX GIC, the CPU1 + * GIC restoration will cause a problem to CPU0 Non-Secure SW. + * The workaround must be: + * 1) Before doing the CPU1 wakeup, CPU0 must disable + * the GIC distributor + * 2) CPU1 must re-enable the GIC distributor on + * it's wakeup path. + */ + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { + local_irq_disable(); + gic_dist_disable(); + } + clkdm_wakeup(cpu1_clkdm); clkdm_allow_idle(cpu1_clkdm); + + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { + while (gic_dist_disabled()) { + udelay(1); + cpu_relax(); + } + gic_timer_retrigger(); + local_irq_enable(); + } } else { dsb_sev(); booted = true; @@ -138,7 +170,14 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * static void __init wakeup_secondary(void) { + void *startup_addr = omap_secondary_startup; void __iomem *base = omap_get_wakeupgen_base(); + + if (cpu_is_omap446x()) { + startup_addr = omap_secondary_startup_4460; + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + } + /* * Write the address of secondary startup routine into the * AuxCoreBoot1 where ROM code will jump and start executing @@ -146,7 +185,7 @@ static void __init wakeup_secondary(void) * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) - omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); + omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else __raw_writel(virt_to_phys(omap5_secondary_startup), base + OMAP_AUX_CORE_BOOT_1); diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c new file mode 100644 index 000000000000..be6bc89ab1e8 --- /dev/null +++ b/arch/arm/mach-omap2/omap2-restart.c @@ -0,0 +1,65 @@ +/* + * omap2-restart.c - code common to all OMAP2xxx machines. + * + * Copyright (C) 2012 Texas Instruments + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include "common.h" +#include "prm2xxx.h" + +/* + * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set + * clock and the sys_ck. Used during the reset process + */ +static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck; + +/* Reboot handling */ + +/** + * omap2xxx_restart - Set DPLL to bypass mode for reboot to work + * + * Set the DPLL to bypass so that reboot completes successfully. No + * return value. + */ +void omap2xxx_restart(char mode, const char *cmd) +{ + u32 rate; + + rate = clk_get_rate(reset_sys_ck); + clk_set_rate(reset_virt_prcm_set_ck, rate); + + /* XXX Should save the cmd argument for use after the reboot */ + + omap2xxx_prm_dpll_reset(); /* never returns */ + while (1); +} + +/** + * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart + * + * Some clocks need to be looked up in advance for the SoC restart + * operation to work - see omap2xxx_restart(). Returns -EINVAL upon + * error or 0 upon success. + */ +static int __init omap2xxx_common_look_up_clks_for_reset(void) +{ + reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set"); + if (IS_ERR(reset_virt_prcm_set_ck)) + return -EINVAL; + + reset_sys_ck = clk_get(NULL, "sys_ck"); + if (IS_ERR(reset_sys_ck)) + return -EINVAL; + + return 0; +} +core_initcall(omap2xxx_common_look_up_clks_for_reset); diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c new file mode 100644 index 000000000000..923c582189e5 --- /dev/null +++ b/arch/arm/mach-omap2/omap3-restart.c @@ -0,0 +1,36 @@ +/* + * omap3-restart.c - Code common to all OMAP3xxx machines. + * + * Copyright (C) 2009, 2012 Texas Instruments + * Copyright (C) 2010 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include "iomap.h" +#include "common.h" +#include "control.h" +#include "prm3xxx.h" + +/* Global address base setup code */ + +/** + * omap3xxx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + */ +void omap3xxx_restart(char mode, const char *cmd) +{ + omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); + omap3xxx_prm_dpll3_reset(); /* never returns */ + while (1); +} diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index e1f289748c5d..6897ae21bb82 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/platform_device.h> #include <linux/memblock.h> #include <linux/of_irq.h> @@ -24,23 +25,29 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> - -#include <plat/sram.h> -#include <plat/omap-secure.h> -#include <plat/mmc.h> +#include <asm/smp_twd.h> #include "omap-wakeupgen.h" - #include "soc.h" +#include "iomap.h" #include "common.h" +#include "mmc.h" #include "hsmmc.h" +#include "prminst44xx.h" +#include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" +#include "omap-secure.h" +#include "sram.h" #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; #endif static void __iomem *sar_ram_base; +static void __iomem *gic_dist_base_addr; +static void __iomem *twd_base; + +#define IRQ_LOCALTIMER 29 #ifdef CONFIG_OMAP4_ERRATA_I688 /* Used to implement memory barrier on DRAM path */ @@ -95,12 +102,14 @@ void __init omap_barriers_init(void) void __init gic_init_irq(void) { void __iomem *omap_irq_base; - void __iomem *gic_dist_base_addr; /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K); + BUG_ON(!twd_base); + /* Static mapping, never released */ omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); BUG_ON(!omap_irq_base); @@ -110,6 +119,38 @@ void __init gic_init_irq(void) gic_init(0, 29, gic_dist_base_addr, omap_irq_base); } +void gic_dist_disable(void) +{ + if (gic_dist_base_addr) + __raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL); +} + +bool gic_dist_disabled(void) +{ + return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); +} + +void gic_timer_retrigger(void) +{ + u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT); + u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET); + u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + + if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) { + /* + * The local timer interrupt got lost while the distributor was + * disabled. Ack the pending interrupt, and retrigger it. + */ + pr_warn("%s: lost localtimer interrupt\n", __func__); + __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) { + __raw_writel(1, twd_base + TWD_TIMER_COUNTER); + twd_ctrl |= TWD_TIMER_CONTROL_ENABLE; + __raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL); + } + } +} + #ifdef CONFIG_CACHE_L2X0 void __iomem *omap4_get_l2cache_base(void) @@ -281,3 +322,19 @@ int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } #endif + +/** + * omap44xx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + */ +void omap44xx_restart(char mode, const char *cmd) +{ + /* XXX Should save 'cmd' into scratchpad for use after reboot */ + omap4_prminst_global_warm_sw_reset(); /* never returns */ + while (1); +} + diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 7a7d1f2a65e9..0ef934fec364 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -89,9 +89,8 @@ #include <linux/of.h> #include <linux/notifier.h> -#include <plat/omap_device.h> -#include <plat/omap_hwmod.h> -#include <plat/clock.h> +#include "omap_device.h" +#include "omap_hwmod.h" /* These parameters are passed to _omap_device_{de,}activate() */ #define USE_WAKEUP_LAT 0 diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/mach-omap2/omap_device.h index 106f50665804..0933c599bf89 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/mach-omap2/omap_device.h @@ -34,7 +34,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" extern struct dev_pm_domain omap_device_pm_domain; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 87cc6d058de2..b3b00f43dd7c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -139,27 +139,25 @@ #include <linux/slab.h> #include <linux/bootmem.h> -#include <plat/clock.h> -#include <plat/omap_hwmod.h> -#include <plat/prcm.h> +#include "clock.h" +#include "omap_hwmod.h" #include "soc.h" #include "common.h" #include "clockdomain.h" #include "powerdomain.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" +#include "cm3xxx.h" #include "cminst44xx.h" #include "cm33xx.h" -#include "prm2xxx_3xxx.h" +#include "prm.h" +#include "prm3xxx.h" #include "prm44xx.h" #include "prm33xx.h" #include "prminst44xx.h" #include "mux.h" #include "pm.h" -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /* Name of the OMAP hwmod for the MPU */ #define MPU_INITIATOR_NAME "mpu" @@ -2095,7 +2093,8 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); @@ -2703,7 +2702,34 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) /* Static functions intended only for use in soc_ops field function pointers */ /** - * _omap2_wait_target_ready - wait for a module to leave slave idle + * _omap2xxx_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ + + return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); +} + +/** + * _omap3xxx_wait_target_ready - wait for a module to leave slave idle * @oh: struct omap_hwmod * * * Wait for a module @oh to leave slave idle. Returns 0 if the module @@ -2711,7 +2737,7 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) * slave idle; otherwise, pass along the return value of the * appropriate *_cm*_wait_module_ready() function. */ -static int _omap2_wait_target_ready(struct omap_hwmod *oh) +static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh) { if (!oh) return -EINVAL; @@ -2724,9 +2750,9 @@ static int _omap2_wait_target_ready(struct omap_hwmod *oh) /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ - return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); + return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); } /** @@ -3994,8 +4020,13 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) */ void __init omap_hwmod_init(void) { - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - soc_ops.wait_target_ready = _omap2_wait_target_ready; + if (cpu_is_omap24xx()) { + soc_ops.wait_target_ready = _omap2xxx_wait_target_ready; + soc_ops.assert_hardreset = _omap2_assert_hardreset; + soc_ops.deassert_hardreset = _omap2_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; + } else if (cpu_is_omap34xx()) { + soc_ops.wait_target_ready = _omap3xxx_wait_target_ready; soc_ops.assert_hardreset = _omap2_assert_hardreset; soc_ops.deassert_hardreset = _omap2_deassert_hardreset; soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 1db029438022..87a3c5b7aa74 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -35,7 +35,6 @@ #include <linux/list.h> #include <linux/ioport.h> #include <linux/spinlock.h> -#include <plat/cpu.h> struct omap_device; diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b5db6007c523..e8efe3d1da6c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -12,21 +12,23 @@ * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> -#include <plat/i2c.h> -#include <plat/dmtimer.h> +#include <plat-omap/dma-omap.h> + +#include "omap_hwmod.h" #include "l3_2xxx.h" #include "l4_2xxx.h" -#include <plat/mmc.h> #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" +#include "i2c.h" +#include "mmc.h" +#include "serial.h" #include "wd_timer.h" /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c455e41b0237..32d17e3fd727 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -12,21 +12,22 @@ * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> -#include <plat/i2c.h> -#include <plat/dmtimer.h> -#include <plat/mmc.h> +#include <plat-omap/dma-omap.h> + +#include "omap_hwmod.h" +#include "mmc.h" #include "l3_2xxx.h" #include "soc.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" +#include "i2c.h" #include "wd_timer.h" /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c index cbb4ef6544ad..0413daba2dba 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c @@ -13,8 +13,7 @@ */ #include <asm/sizes.h> -#include <plat/omap_hwmod.h> -#include <plat/serial.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 8851bbb6bb24..40d6c93d9853 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -9,13 +9,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <plat/omap_hwmod.h> -#include <plat/serial.h> -#include <plat/dma.h> -#include <plat/common.h> + +#include <plat-omap/dma-omap.h> + +#include "omap_hwmod.h" #include "hdq1w.h" #include "omap_hwmod_common_data.h" +#include "dma.h" /* UART */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 1a1287d62648..47901a5e76de 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -13,10 +13,10 @@ */ #include <asm/sizes.h> -#include <plat/omap_hwmod.h> -#include <plat/serial.h> +#include "omap_hwmod.h" #include "l3_2xxx.h" #include "l4_2xxx.h" +#include "serial.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index bd9220ed5ab9..0db8f450bad9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -8,13 +8,13 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <plat/omap_hwmod.h> -#include <plat/serial.h> + #include <linux/platform_data/gpio-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" @@ -58,8 +58,9 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -268,6 +269,7 @@ struct omap_hwmod omap2xxx_timer1_hwmod = { }, .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -286,6 +288,7 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -304,6 +307,7 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -322,6 +326,7 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -341,6 +346,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -360,6 +366,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -379,6 +386,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -398,6 +406,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -417,6 +426,7 @@ struct omap_hwmod omap2xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -436,6 +446,7 @@ struct omap_hwmod omap2xxx_timer10_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -455,6 +466,7 @@ struct omap_hwmod omap2xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -474,6 +486,7 @@ struct omap_hwmod omap2xxx_timer12_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* wd_timer2 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 59d5c1cd316d..ad8d43b33273 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -14,13 +14,11 @@ * GNU General Public License for more details. */ -#include <plat/omap_hwmod.h> -#include <plat/cpu.h> +#include <linux/i2c-omap.h> + +#include "omap_hwmod.h" #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/dma.h> -#include <plat/mmc.h> -#include <plat/i2c.h> #include "omap_hwmod_common_data.h" @@ -28,6 +26,8 @@ #include "cm33xx.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" +#include "i2c.h" +#include "mmc.h" /* * IP blocks diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f67b7ee07dd4..7f73f2132acc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -14,28 +14,32 @@ * * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/power/smartreflex.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> +#include <plat-omap/dma-omap.h> #include "l3_3xxx.h" #include "l4_3xxx.h" -#include <plat/i2c.h> -#include <plat/mmc.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> -#include <plat/iommu.h> #include "am35xx.h" #include "soc.h" +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" + +#include "dma.h" +#include "i2c.h" +#include "mmc.h" #include "wd_timer.h" +#include "serial.h" /* * OMAP3xxx hardware module integration data @@ -149,29 +153,16 @@ static struct omap_hwmod omap3xxx_debugss_hwmod = { }; /* timer class */ -static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = { - .name = "timer", - .sysc = &omap3xxx_timer_1ms_sysc, -}; - static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -220,7 +211,8 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -237,7 +229,8 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, }, }, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -255,6 +248,7 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -272,6 +266,7 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -290,6 +285,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -308,6 +304,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -326,6 +323,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -344,6 +342,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -362,6 +361,7 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -379,7 +379,8 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -398,6 +399,7 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -421,6 +423,7 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = { }, .dev_attr = &capability_secure_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0b1249e00398..26f8e9f18190 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,23 +21,24 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> -#include <linux/platform_data/omap_ocp2scp.h> +#include <linux/i2c-omap.h> + +#include <plat-omap/dma-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/i2c.h> -#include <plat/dma.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <plat/mmc.h> +#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> -#include <plat/common.h> -#include <plat/iommu.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm1_44xx.h" #include "cm2_44xx.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" +#include "i2c.h" +#include "mmc.h" #include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ @@ -3102,6 +3103,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = { SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -3155,6 +3157,7 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { .name = "timer1", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer1_irqs, .main_clk = "timer1_fck", .prcm = { @@ -3177,6 +3180,7 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .name = "timer2", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer2_irqs, .main_clk = "timer2_fck", .prcm = { @@ -3351,6 +3355,7 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { .name = "timer10", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer10_irqs, .main_clk = "timer10_fck", .prcm = { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 9f1ccdc8cc8c..79d623b83e49 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -16,7 +16,7 @@ * data and their integration with other OMAP modules and Linux. */ -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 2bc8f1705d4a..cfcce299177c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -13,7 +13,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H #define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "common.h" #include "display.h" diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h index c784c12f98a1..7e437bf6024c 100644 --- a/arch/arm/mach-omap2/omap_opp_data.h +++ b/arch/arm/mach-omap2/omap_opp_data.h @@ -19,7 +19,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H #define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index d992db8ff0b0..4d76a3ca5bf3 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -27,11 +27,11 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/usb.h> - -#include <plat/usb.h> +#include <linux/usb/musb.h> #include "soc.h" #include "control.h" +#include "usb.h" void am35x_musb_reset(void) { diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index f515a1a056d5..2bf35dc091be 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/i2c/twl.h> +#include "soc.h" #include "voltage.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 58e16aef40bb..bd41d59a7cab 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -20,7 +20,7 @@ #include <linux/opp.h> #include <linux/cpu.h> -#include <plat/omap_device.h> +#include "omap_device.h" #include "omap_opp_data.h" diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index 75cef5f67a8a..62772e0e0d69 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -19,6 +19,7 @@ */ #include <linux/module.h> +#include "soc.h" #include "control.h" #include "omap_opp_data.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 46092cd806fa..e2c291f52f92 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -27,12 +27,12 @@ #include <linux/module.h> #include <linux/slab.h> -#include <plat/clock.h> +#include "clock.h" #include "powerdomain.h" #include "clockdomain.h" -#include <plat/dmtimer.h> -#include <plat/omap-pm.h> +#include "omap-pm.h" +#include "soc.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index ea61c32957bd..331478f9b864 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -20,10 +20,11 @@ #include <asm/system_misc.h> -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "omap-pm.h" +#include "omap_device.h" #include "common.h" +#include "soc.h" #include "prcm-common.h" #include "voltage.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 67d66131cfa7..fc3c96d5e013 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -102,6 +102,15 @@ extern void enable_omap3630_toggle_l2_on_restore(void); static inline void enable_omap3630_toggle_l2_on_restore(void) { } #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ +#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) + +#if defined(CONFIG_ARCH_OMAP4) +extern u16 pm44xx_errata; +#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id)) +#else +#define IS_PM44XX_ERRATUM(id) 0 +#endif + #ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 8af6cd6ac331..13e1f4303989 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -31,21 +31,24 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <asm/fncpy.h> + #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> #include <asm/system_misc.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "soc.h" #include "common.h" -#include "prm2xxx_3xxx.h" +#include "clock.h" +#include "prm2xxx.h" #include "prm-regbits-24xx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" #include "pm.h" #include "control.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3a904de4313e..770320061422 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -32,25 +32,24 @@ #include <trace/events/power.h> +#include <asm/fncpy.h> #include <asm/suspend.h> #include <asm/system_misc.h> -#include <plat/sram.h> #include "clockdomain.h" #include "powerdomain.h" -#include <plat/sdrc.h> -#include <plat/prcm.h> -#include <plat/gpmc.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "soc.h" #include "common.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" +#include "gpmc.h" #include "prm-regbits-34xx.h" - -#include "prm2xxx_3xxx.h" +#include "prm3xxx.h" #include "pm.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* pm34xx errata defined in pm.h */ diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 04922d149068..7da75aed1514 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -18,6 +18,7 @@ #include <linux/slab.h> #include <asm/system_misc.h> +#include "soc.h" #include "common.h" #include "clockdomain.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 2a791766283d..250d909e38bd 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -15,8 +15,9 @@ #include <asm/pmu.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "soc.h" +#include "omap_hwmod.h" +#include "omap_device.h" static char *omap2_pmu_oh_names[] = {"mpu"}; static char *omap3_pmu_oh_names[] = {"mpu", "debugss"}; @@ -57,8 +58,6 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) if (IS_ERR(omap_pmu_dev)) return PTR_ERR(omap_pmu_dev); - pm_runtime_enable(&omap_pmu_dev->dev); - return 0; } diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 1678a3284233..dea62a9aad07 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -29,8 +29,6 @@ #include <asm/cpu.h> -#include <plat/prcm.h> - #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index baee90608d11..5277d56eb37f 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -22,8 +22,6 @@ #include <linux/atomic.h> -#include <plat/cpu.h> - #include "voltage.h" /* Powerdomain basic power states */ diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c deleted file mode 100644 index 3950ccfe5f4a..000000000000 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * OMAP2 and OMAP3 powerdomain control - * - * Copyright (C) 2009-2011 Texas Instruments, Inc. - * Copyright (C) 2007-2009 Nokia Corporation - * - * Derived from mach-omap2/powerdomain.c written by Paul Walmsley - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/bug.h> - -#include <plat/prcm.h> - -#include "powerdomain.h" -#include "prm.h" -#include "prm-regbits-24xx.h" -#include "prm-regbits-34xx.h" - - -/* Common functions across OMAP2 and OMAP3 */ -static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) -{ - omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, - (pwrst << OMAP_POWERSTATE_SHIFT), - pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); - return 0; -} - -static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL, - OMAP_POWERSTATE_MASK); -} - -static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTST, - OMAP_POWERSTATEST_MASK); -} - -static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); - - omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL); - - return 0; -} - -static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - - omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL); - - return 0; -} - -static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_stst_mask(bank); - - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST, - m); -} - -static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL, m); -} - -static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) -{ - u32 v; - - v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK); - omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v, - pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); - - return 0; -} - -static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm) -{ - u32 c = 0; - - /* - * REVISIT: pwrdm_wait_transition() may be better implemented - * via a callback and a periodic timer check -- how long do we expect - * powerdomain transitions to take? - */ - - /* XXX Is this udelay() value meaningful? */ - while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) & - OMAP_INTRANSITION_MASK) && - (c++ < PWRDM_TRANSITION_BAILOUT)) - udelay(1); - - if (c > PWRDM_TRANSITION_BAILOUT) { - pr_err("powerdomain: %s: waited too long to complete transition\n", - pwrdm->name); - return -EAGAIN; - } - - pr_debug("powerdomain: completed transition in %d loops\n", c); - - return 0; -} - -/* Applicable only for OMAP3. Not supported on OMAP2 */ -static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP3430_PM_PREPWSTST, - OMAP3430_LASTPOWERSTATEENTERED_MASK); -} - -static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTST, - OMAP3430_LOGICSTATEST_MASK); -} - -static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL, - OMAP3430_LOGICSTATEST_MASK); -} - -static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP3430_PM_PREPWSTST, - OMAP3430_LASTLOGICSTATEENTERED_MASK); -} - -static int omap3_get_mem_bank_lastmemst_mask(u8 bank) -{ - switch (bank) { - case 0: - return OMAP3430_LASTMEM1STATEENTERED_MASK; - case 1: - return OMAP3430_LASTMEM2STATEENTERED_MASK; - case 2: - return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK; - case 3: - return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK; - default: - WARN_ON(1); /* should never happen */ - return -EEXIST; - } - return 0; -} - -static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m; - - m = omap3_get_mem_bank_lastmemst_mask(bank); - - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP3430_PM_PREPWSTST, m); -} - -static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) -{ - omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST); - return 0; -} - -static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) -{ - return omap2_prm_rmw_mod_reg_bits(0, - 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, - pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); -} - -static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) -{ - return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, - 0, pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL); -} - -struct pwrdm_ops omap2_pwrdm_operations = { - .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, - .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, - .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, - .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, - .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, - .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, - .pwrdm_wait_transition = omap2_pwrdm_wait_transition, -}; - -struct pwrdm_ops omap3_pwrdm_operations = { - .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst, - .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, - .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst, - .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst, - .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst, - .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, - .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, - .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, - .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, - .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst, - .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst, - .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar, - .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar, - .pwrdm_wait_transition = omap2_pwrdm_wait_transition, -}; diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c deleted file mode 100644 index 67c5663899b6..000000000000 --- a/arch/arm/mach-omap2/powerdomain33xx.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * AM33XX Powerdomain control - * - * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak - * <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/delay.h> - -#include <plat/prcm.h> - -#include "powerdomain.h" -#include "prm33xx.h" -#include "prm-regbits-33xx.h" - - -static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) -{ - am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK, - (pwrst << OMAP_POWERSTATE_SHIFT), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - return 0; -} - -static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - v &= OMAP_POWERSTATE_MASK; - v >>= OMAP_POWERSTATE_SHIFT; - - return v; -} - -static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= OMAP_POWERSTATEST_MASK; - v >>= OMAP_POWERSTATEST_SHIFT; - - return v; -} - -static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= AM33XX_LASTPOWERSTATEENTERED_MASK; - v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; - - return v; -} - -static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) -{ - am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, - (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - return 0; -} - -static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) -{ - am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK, - AM33XX_LASTPOWERSTATEENTERED_MASK, - pwrdm->prcm_offs, pwrdm->pwrstst_offs); - return 0; -} - -static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) -{ - u32 m; - - m = pwrdm->logicretstate_mask; - if (!m) - return -EINVAL; - - am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - - return 0; -} - -static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= AM33XX_LOGICSTATEST_MASK; - v >>= AM33XX_LOGICSTATEST_SHIFT; - - return v; -} - -static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm) -{ - u32 v, m; - - m = pwrdm->logicretstate_mask; - if (!m) - return -EINVAL; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - v &= m; - v >>= __ffs(m); - - return v; -} - -static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = pwrdm->mem_on_mask[bank]; - if (!m) - return -EINVAL; - - am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - - return 0; -} - -static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = pwrdm->mem_ret_mask[bank]; - if (!m) - return -EINVAL; - - am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - - return 0; -} - -static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m, v; - - m = pwrdm->mem_pwrst_mask[bank]; - if (!m) - return -EINVAL; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= m; - v >>= __ffs(m); - - return v; -} - -static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m, v; - - m = pwrdm->mem_retst_mask[bank]; - if (!m) - return -EINVAL; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - v &= m; - v >>= __ffs(m); - - return v; -} - -static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm) -{ - u32 c = 0; - - /* - * REVISIT: pwrdm_wait_transition() may be better implemented - * via a callback and a periodic timer check -- how long do we expect - * powerdomain transitions to take? - */ - - /* XXX Is this udelay() value meaningful? */ - while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs) - & OMAP_INTRANSITION_MASK) && - (c++ < PWRDM_TRANSITION_BAILOUT)) - udelay(1); - - if (c > PWRDM_TRANSITION_BAILOUT) { - pr_err("powerdomain: %s: waited too long to complete transition\n", - pwrdm->name); - return -EAGAIN; - } - - pr_debug("powerdomain: completed transition in %d loops\n", c); - - return 0; -} - -struct pwrdm_ops am33xx_pwrdm_operations = { - .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, - .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, - .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, - .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, - .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst, - .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange, - .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst, - .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst, - .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst, - .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst, - .pwrdm_wait_transition = am33xx_pwrdm_wait_transition, -}; diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c deleted file mode 100644 index aceb4f464c9b..000000000000 --- a/arch/arm/mach-omap2/powerdomain44xx.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * OMAP4 powerdomain control - * - * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc. - * Copyright (C) 2007-2009 Nokia Corporation - * - * Derived from mach-omap2/powerdomain.c written by Paul Walmsley - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/bug.h> - -#include "powerdomain.h" -#include <plat/prcm.h> -#include "prm2xxx_3xxx.h" -#include "prm44xx.h" -#include "prminst44xx.h" -#include "prm-regbits-44xx.h" - -static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) -{ - omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK, - (pwrst << OMAP_POWERSTATE_SHIFT), - pwrdm->prcm_partition, - pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL); - return 0; -} - -static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - v &= OMAP_POWERSTATE_MASK; - v >>= OMAP_POWERSTATE_SHIFT; - - return v; -} - -static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTST); - v &= OMAP_POWERSTATEST_MASK; - v >>= OMAP_POWERSTATEST_SHIFT; - - return v; -} - -static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTST); - v &= OMAP4430_LASTPOWERSTATEENTERED_MASK; - v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT; - - return v; -} - -static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) -{ - omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK, - (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT), - pwrdm->prcm_partition, - pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL); - return 0; -} - -static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) -{ - omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK, - OMAP4430_LASTPOWERSTATEENTERED_MASK, - pwrdm->prcm_partition, - pwrdm->prcm_offs, OMAP4_PM_PWSTST); - return 0; -} - -static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) -{ - u32 v; - - v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK); - omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v, - pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - - return 0; -} - -static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); - - omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - - return 0; -} - -static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - - omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - - return 0; -} - -static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTST); - v &= OMAP4430_LOGICSTATEST_MASK; - v >>= OMAP4430_LOGICSTATEST_SHIFT; - - return v; -} - -static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - v &= OMAP4430_LOGICRETSTATE_MASK; - v >>= OMAP4430_LOGICRETSTATE_SHIFT; - - return v; -} - -/** - * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate - * @pwrdm: struct powerdomain * to read the state for - * - * Reads the previous logic powerstate for a powerdomain. This - * function must determine the previous logic powerstate by first - * checking the previous powerstate for the domain. If that was OFF, - * then logic has been lost. If previous state was RETENTION, the - * function reads the setting for the next retention logic state to - * see the actual value. In every other case, the logic is - * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET - * depending whether the logic was retained or not. - */ -static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) -{ - int state; - - state = omap4_pwrdm_read_prev_pwrst(pwrdm); - - if (state == PWRDM_POWER_OFF) - return PWRDM_POWER_OFF; - - if (state != PWRDM_POWER_RET) - return PWRDM_POWER_RET; - - return omap4_pwrdm_read_logic_retst(pwrdm); -} - -static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m, v; - - m = omap2_pwrdm_get_mem_bank_stst_mask(bank); - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTST); - v &= m; - v >>= __ffs(m); - - return v; -} - -static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m, v; - - m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - v &= m; - v >>= __ffs(m); - - return v; -} - -/** - * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate - * @pwrdm: struct powerdomain * to read mem powerstate for - * @bank: memory bank index - * - * Reads the previous memory powerstate for a powerdomain. This - * function must determine the previous memory powerstate by first - * checking the previous powerstate for the domain. If that was OFF, - * then logic has been lost. If previous state was RETENTION, the - * function reads the setting for the next memory retention state to - * see the actual value. In every other case, the logic is - * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET - * depending whether logic was retained or not. - */ -static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - int state; - - state = omap4_pwrdm_read_prev_pwrst(pwrdm); - - if (state == PWRDM_POWER_OFF) - return PWRDM_POWER_OFF; - - if (state != PWRDM_POWER_RET) - return PWRDM_POWER_RET; - - return omap4_pwrdm_read_mem_retst(pwrdm, bank); -} - -static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm) -{ - u32 c = 0; - - /* - * REVISIT: pwrdm_wait_transition() may be better implemented - * via a callback and a periodic timer check -- how long do we expect - * powerdomain transitions to take? - */ - - /* XXX Is this udelay() value meaningful? */ - while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition, - pwrdm->prcm_offs, - OMAP4_PM_PWSTST) & - OMAP_INTRANSITION_MASK) && - (c++ < PWRDM_TRANSITION_BAILOUT)) - udelay(1); - - if (c > PWRDM_TRANSITION_BAILOUT) { - pr_err("powerdomain: %s: waited too long to complete transition\n", - pwrdm->name); - return -EAGAIN; - } - - pr_debug("powerdomain: completed transition in %d loops\n", c); - - return 0; -} - -struct pwrdm_ops omap4_pwrdm_operations = { - .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst, - .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange, - .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst, - .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst, - .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst, - .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst, - .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst, - .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst, - .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst, - .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst, - .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst, - .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst, - .pwrdm_wait_transition = omap4_pwrdm_wait_transition, -}; diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index 2385c1f009ee..ba520d4f7c7b 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include "soc.h" #include "powerdomain.h" #include "powerdomains2xxx_3xxx_data.h" diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 72df97482cc0..c7d355fafd24 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -406,11 +406,6 @@ #define OMAP3430_EN_CORE_MASK (1 << 0) -/* - * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP - * submodule to exit hardreset - */ -#define MAX_MODULE_HARDRESET_WAIT 10000 /* * Maximum time(us) it takes to output the signal WUCLKOUT of the last @@ -419,24 +414,7 @@ * microseconds on OMAP4, so this timeout may be too high. */ #define MAX_IOPAD_LATCH_TIME 100 - # ifndef __ASSEMBLER__ -extern void __iomem *prm_base; -extern void __iomem *cm_base; -extern void __iomem *cm2_base; -extern void __iomem *prcm_mpu_base; - -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) -extern void omap_prm_base_init(void); -extern void omap_cm_base_init(void); -#else -static inline void omap_prm_base_init(void) -{ -} -static inline void omap_cm_base_init(void) -{ -} -#endif /** * struct omap_prcm_irq - describes a PRCM interrupt bit diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c deleted file mode 100644 index 0f51e034e0aa..000000000000 --- a/arch/arm/mach-omap2/prcm.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/prcm.c - * - * OMAP 24xx Power Reset and Clock Management (PRCM) functions - * - * Copyright (C) 2005 Nokia Corporation - * - * Written by Tony Lindgren <tony.lindgren@nokia.com> - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Rajendra Nayak <rnayak@ti.com> - * - * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc. - * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/export.h> - -#include "common.h" -#include <plat/prcm.h> - -#include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx_3xxx.h" -#include "prm2xxx_3xxx.h" -#include "prm44xx.h" -#include "prminst44xx.h" -#include "cminst44xx.h" -#include "prm-regbits-24xx.h" -#include "prm-regbits-44xx.h" -#include "control.h" - -void __iomem *prm_base; -void __iomem *cm_base; -void __iomem *cm2_base; -void __iomem *prcm_mpu_base; - -#define MAX_MODULE_ENABLE_WAIT 100000 - -u32 omap_prcm_get_reset_sources(void) -{ - /* XXX This presumably needs modification for 34XX */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f; - if (cpu_is_omap44xx()) - return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f; - - return 0; -} -EXPORT_SYMBOL(omap_prcm_get_reset_sources); - -/* Resets clock rates and reboots the system. Only called from system.h */ -void omap_prcm_restart(char mode, const char *cmd) -{ - s16 prcm_offs = 0; - - if (cpu_is_omap24xx()) { - omap2xxx_clk_prepare_for_reboot(); - - prcm_offs = WKUP_MOD; - } else if (cpu_is_omap34xx()) { - prcm_offs = OMAP3430_GR_MOD; - omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); - } else if (cpu_is_omap44xx()) { - omap4_prminst_global_warm_sw_reset(); /* never returns */ - } else { - WARN_ON(1); - } - - /* - * As per Errata i520, in some cases, user will not be able to - * access DDR memory after warm-reset. - * This situation occurs while the warm-reset happens during a read - * access to DDR memory. In that particular condition, DDR memory - * does not respond to a corrupted read command due to the warm - * reset occurrence but SDRC is waiting for read completion. - * SDRC is not sensitive to the warm reset, but the interconnect is - * reset on the fly, thus causing a misalignment between SDRC logic, - * interconnect logic and DDR memory state. - * WORKAROUND: - * Steps to perform before a Warm reset is trigged: - * 1. enable self-refresh on idle request - * 2. put SDRC in idle - * 3. wait until SDRC goes to idle - * 4. generate SW reset (Global SW reset) - * - * Steps to be performed after warm reset occurs (in bootloader): - * if HW warm reset is the source, apply below steps before any - * accesses to SDRAM: - * 1. Reset SMS and SDRC and wait till reset is complete - * 2. Re-initialize SMS, SDRC and memory - * - * NOTE: Above work around is required only if arch reset is implemented - * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need - * the WA since it resets SDRC as well as part of cold reset. - */ - - /* XXX should be moved to some OMAP2/3 specific code */ - omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, - OMAP2_RM_RSTCTRL); - omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */ -} - -/** - * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness - * @reg: physical address of module IDLEST register - * @mask: value to mask against to determine if the module is active - * @idlest: idle state indicator (0 or 1) for the clock - * @name: name of the clock (for printk) - * - * Returns 1 if the module indicated readiness in time, or 0 if it - * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. - * - * XXX This function is deprecated. It should be removed once the - * hwmod conversion is complete. - */ -int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, - const char *name) -{ - int i = 0; - int ena = 0; - - if (idlest) - ena = 0; - else - ena = mask; - - /* Wait for lock */ - omap_test_timeout(((__raw_readl(reg) & mask) == ena), - MAX_MODULE_ENABLE_WAIT, i); - - if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("cm: Module associated with clock %s ready after %d loops\n", - name, i); - else - pr_err("cm: Module associated with clock %s didn't enable in %d tries\n", - name, MAX_MODULE_ENABLE_WAIT); - - return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; -}; - -void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) -{ - if (omap2_globals->prm) - prm_base = omap2_globals->prm; - if (omap2_globals->cm) - cm_base = omap2_globals->cm; - if (omap2_globals->cm2) - cm2_base = omap2_globals->cm2; - if (omap2_globals->prcm_mpu) - prcm_mpu_base = omap2_globals->prcm_mpu; - - if (cpu_is_omap44xx() || soc_is_omap54xx()) { - omap_prm_base_init(); - omap_cm_base_init(); - } -} - -/* - * Stubbed functions so that common files continue to build when - * custom builds are used - * XXX These are temporary and should be removed at the earliest possible - * opportunity - */ -int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ - return 0; -} - -void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, - s16 cdoffs, u16 clkctrl_offs) -{ -} - -void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ -} diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index 928dbd4f20ed..c30e44a7fab0 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -20,6 +20,12 @@ #include "prcm_mpu44xx.h" #include "cm-regbits-44xx.h" +/* + * prcm_mpu_base: the virtual address of the start of the PRCM_MPU IP + * block registers + */ +void __iomem *prcm_mpu_base; + /* PRCM_MPU low-level functions */ u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg) @@ -43,3 +49,14 @@ u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) return v; } + +/** + * omap2_set_globals_prcm_mpu - set the MPU PRCM base address (for early use) + * @prcm_mpu: PRCM_MPU base virtual address + * + * XXX Will be replaced when the PRM/CM drivers are completed. + */ +void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu) +{ + prcm_mpu_base = prcm_mpu; +} diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 8a6e250f04b5..884af7bb4afd 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -1,7 +1,7 @@ /* * OMAP44xx PRCM MPU instance offset macros * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010, 2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) @@ -25,6 +25,12 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H +#include "common.h" + +# ifndef __ASSEMBLER__ +extern void __iomem *prcm_mpu_base; +# endif + #define OMAP4430_PRCM_MPU_BASE 0x48243000 #define OMAP44XX_PRCM_MPU_REGADDR(inst, reg) \ @@ -98,6 +104,7 @@ extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx); extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx); extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu); # endif #endif diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h index 6ac966103f34..638da6dd41c3 100644 --- a/arch/arm/mach-omap2/prm-regbits-24xx.h +++ b/arch/arm/mach-omap2/prm-regbits-24xx.h @@ -14,7 +14,7 @@ * published by the Free Software Foundation. */ -#include "prm2xxx_3xxx.h" +#include "prm2xxx.h" /* Bits shared between registers */ @@ -209,9 +209,13 @@ /* RM_RSTST_WKUP specific bits */ /* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */ +#define OMAP24XX_EXTWMPU_RST_SHIFT 6 #define OMAP24XX_EXTWMPU_RST_MASK (1 << 6) +#define OMAP24XX_SECU_WD_RST_SHIFT 5 #define OMAP24XX_SECU_WD_RST_MASK (1 << 5) +#define OMAP24XX_MPU_WD_RST_SHIFT 4 #define OMAP24XX_MPU_WD_RST_MASK (1 << 4) +#define OMAP24XX_SECU_VIOL_RST_SHIFT 3 #define OMAP24XX_SECU_VIOL_RST_MASK (1 << 3) /* PM_WKEN_WKUP specific bits */ diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 64c087af6a8b..838b594d4e13 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -14,7 +14,7 @@ #define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H -#include "prm2xxx_3xxx.h" +#include "prm3xxx.h" /* Shared register bits */ @@ -509,15 +509,25 @@ #define OMAP3430_RSTTIME1_MASK (0xff << 0) /* PRM_RSTST */ +#define OMAP3430_ICECRUSHER_RST_SHIFT 10 #define OMAP3430_ICECRUSHER_RST_MASK (1 << 10) +#define OMAP3430_ICEPICK_RST_SHIFT 9 #define OMAP3430_ICEPICK_RST_MASK (1 << 9) +#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT 8 #define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK (1 << 8) +#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT 7 #define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK (1 << 7) +#define OMAP3430_EXTERNAL_WARM_RST_SHIFT 6 #define OMAP3430_EXTERNAL_WARM_RST_MASK (1 << 6) +#define OMAP3430_SECURE_WD_RST_SHIFT 5 #define OMAP3430_SECURE_WD_RST_MASK (1 << 5) +#define OMAP3430_MPU_WD_RST_SHIFT 4 #define OMAP3430_MPU_WD_RST_MASK (1 << 4) +#define OMAP3430_SECURITY_VIOL_RST_SHIFT 3 #define OMAP3430_SECURITY_VIOL_RST_MASK (1 << 3) +#define OMAP3430_GLOBAL_SW_RST_SHIFT 1 #define OMAP3430_GLOBAL_SW_RST_MASK (1 << 1) +#define OMAP3430_GLOBAL_COLD_RST_SHIFT 0 #define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0) /* PRM_VOLTCTRL */ diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 39d562169d18..a1a266ce90da 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -1,7 +1,7 @@ /* * OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * * Paul Walmsley @@ -15,6 +15,28 @@ #include "prcm-common.h" +# ifndef __ASSEMBLER__ +extern void __iomem *prm_base; +extern void omap2_set_globals_prm(void __iomem *prm); +# endif + + +/* + * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP + * module to softreset + */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 + +/* + * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP + * submodule to exit hardreset + */ +#define MAX_MODULE_HARDRESET_WAIT 10000 + +/* + * Register bitfields + */ + /* * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP * @@ -52,5 +74,58 @@ #define OMAP_POWERSTATE_SHIFT 0 #define OMAP_POWERSTATE_MASK (0x3 << 0) +/* + * Standardized OMAP reset source bits + * + * To the extent these happen to match the hardware register bit + * shifts, it's purely coincidental. Used by omap-wdt.c. + * OMAP_UNKNOWN_RST_SRC_ID_SHIFT is a special value, used whenever + * there are any bits remaining in the global PRM_RSTST register that + * haven't been identified, or when the PRM code for the current SoC + * doesn't know how to interpret the register. + */ +#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0 +#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1 +#define OMAP_SECU_VIOL_RST_SRC_ID_SHIFT 2 +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 +#define OMAP_SECU_WD_RST_SRC_ID_SHIFT 4 +#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5 +#define OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT 6 +#define OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT 7 +#define OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT 8 +#define OMAP_ICEPICK_RST_SRC_ID_SHIFT 9 +#define OMAP_ICECRUSHER_RST_SRC_ID_SHIFT 10 +#define OMAP_C2C_RST_SRC_ID_SHIFT 11 +#define OMAP_UNKNOWN_RST_SRC_ID_SHIFT 12 + +#ifndef __ASSEMBLER__ + +/** + * struct prm_reset_src_map - map register bitshifts to standard bitshifts + * @reg_shift: bitshift in the PRM reset source register + * @std_shift: bitshift equivalent in the standard reset source list + * + * The fields are signed because -1 is used as a terminator. + */ +struct prm_reset_src_map { + s8 reg_shift; + s8 std_shift; +}; + +/** + * struct prm_ll_data - fn ptrs to per-SoC PRM function implementations + * @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl + */ +struct prm_ll_data { + u32 (*read_reset_sources)(void); +}; + +extern int prm_register(struct prm_ll_data *pld); +extern int prm_unregister(struct prm_ll_data *pld); + +extern u32 prm_read_reset_sources(void); + +#endif + #endif diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c new file mode 100644 index 000000000000..bf24fc47603b --- /dev/null +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -0,0 +1,139 @@ +/* + * OMAP2xxx PRM module functions + * + * Copyright (C) 2010-2012 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * Benoît Cousson + * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> + +#include "common.h" +#include <plat/cpu.h> + +#include "vp.h" +#include "powerdomain.h" +#include "clockdomain.h" +#include "prm2xxx.h" +#include "cm2xxx_3xxx.h" +#include "prm-regbits-24xx.h" + +/* + * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP + * hardware register (which are specific to the OMAP2xxx SoCs) to + * reset source ID bit shifts (which is an OMAP SoC-independent + * enumeration) + */ +static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = { + { OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, + { OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, + { OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, + { OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, + { OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT }, + { OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, + { -1, -1 }, +}; + +/** + * omap2xxx_prm_read_reset_sources - return the last SoC reset source + * + * Return a u32 representing the last reset sources of the SoC. The + * returned reset source bits are standardized across OMAP SoCs. + */ +static u32 omap2xxx_prm_read_reset_sources(void) +{ + struct prm_reset_src_map *p; + u32 r = 0; + u32 v; + + v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST); + + p = omap2xxx_prm_reset_src_map; + while (p->reg_shift >= 0 && p->std_shift >= 0) { + if (v & (1 << p->reg_shift)) + r |= 1 << p->std_shift; + p++; + } + + return r; +} + +/** + * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC + * + * Set the DPLL reset bit, which should reboot the SoC. This is the + * recommended way to restart the SoC. No return value. + */ +void omap2xxx_prm_dpll_reset(void) +{ + omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD, + OMAP2_RM_RSTCTRL); + /* OCP barrier */ + omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL); +} + +int omap2xxx_clkdm_sleep(struct clockdomain *clkdm) +{ + omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, + clkdm->pwrdm.ptr->prcm_offs, + OMAP2_PM_PWSTCTRL); + return 0; +} + +int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm) +{ + omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, + clkdm->pwrdm.ptr->prcm_offs, + OMAP2_PM_PWSTCTRL); + return 0; +} + +struct pwrdm_ops omap2_pwrdm_operations = { + .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, + .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, + .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, + .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, + .pwrdm_wait_transition = omap2_pwrdm_wait_transition, +}; + +/* + * + */ + +static struct prm_ll_data omap2xxx_prm_ll_data = { + .read_reset_sources = &omap2xxx_prm_read_reset_sources, +}; + +static int __init omap2xxx_prm_init(void) +{ + if (!cpu_is_omap24xx()) + return 0; + + return prm_register(&omap2xxx_prm_ll_data); +} +subsys_initcall(omap2xxx_prm_init); + +static void __exit omap2xxx_prm_exit(void) +{ + if (!cpu_is_omap24xx()) + return; + + /* Should never happen */ + WARN(prm_unregister(&omap2xxx_prm_ll_data), + "%s: prm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap2xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h new file mode 100644 index 000000000000..fe8a14f190ab --- /dev/null +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -0,0 +1,134 @@ +/* + * OMAP2xxx Power/Reset Management (PRM) register definitions + * + * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The PRM hardware modules on the OMAP2/3 are quite similar to each + * other. The PRM on OMAP4 has a new register layout, and is handled + * in a separate file. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H +#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H + +#include "prcm-common.h" +#include "prm.h" +#include "prm2xxx_3xxx.h" + +#define OMAP2420_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) +#define OMAP2430_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) + +/* + * OMAP2-specific global PRM registers + * Use __raw_{read,write}l() with these registers. + * + * With a few exceptions, these are the register names beginning with + * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE + * bits.) + * + */ + +#define OMAP2_PRCM_REVISION_OFFSET 0x0000 +#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 +#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 +#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2_PRCM_VOLTST_OFFSET 0x0054 +#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 +#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078 +#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080 +#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 +#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 +#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 +#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 +#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098) + +/* + * Module specific PRM register offsets from PRM_BASE + domain offset + * + * Use prm_{read,write}_mod_reg() with these registers. + * + * With a few exceptions, these are the register names beginning with + * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the + * IRQSTATUS and IRQENABLE bits.) + */ + +/* Register offsets appearing on both OMAP2 and OMAP3 */ + +#define OMAP2_RM_RSTCTRL 0x0050 +#define OMAP2_RM_RSTTIME 0x0054 +#define OMAP2_RM_RSTST 0x0058 +#define OMAP2_PM_PWSTCTRL 0x00e0 +#define OMAP2_PM_PWSTST 0x00e4 + +#define PM_WKEN 0x00a0 +#define PM_WKEN1 PM_WKEN +#define PM_WKST 0x00b0 +#define PM_WKST1 PM_WKST +#define PM_WKDEP 0x00c8 +#define PM_EVGENCTRL 0x00d4 +#define PM_EVGENONTIM 0x00d8 +#define PM_EVGENOFFTIM 0x00dc + +/* OMAP2xxx specific register offsets */ +#define OMAP24XX_PM_WKEN2 0x00a4 +#define OMAP24XX_PM_WKST2 0x00b4 + +#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ +#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ +#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 +#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc + +#ifndef __ASSEMBLER__ +/* Function prototypes */ +extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); +extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); + +extern void omap2xxx_prm_dpll_reset(void); + +extern int __init prm2xxx_init(void); +extern int __exit prm2xxx_exit(void); + +#endif + +#endif diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9529984d8d2b..30517f5af707 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,82 +15,12 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/irq.h> -#include <plat/prcm.h> - -#include "soc.h" #include "common.h" -#include "vp.h" - +#include "powerdomain.h" #include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" #include "prm-regbits-24xx.h" -#include "prm-regbits-34xx.h" - -static const struct omap_prcm_irq omap3_prcm_irqs[] = { - OMAP_PRCM_IRQ("wkup", 0, 0), - OMAP_PRCM_IRQ("io", 9, 1), -}; - -static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { - .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, - .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET, - .nr_regs = 1, - .irqs = omap3_prcm_irqs, - .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), - .irq = 11 + OMAP_INTC_START, - .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, - .ocp_barrier = &omap3xxx_prm_ocp_barrier, - .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, - .restore_irqen = &omap3xxx_prm_restore_irqen, -}; - -u32 omap2_prm_read_mod_reg(s16 module, u16 idx) -{ - return __raw_readl(prm_base + module + idx); -} - -void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) -{ - __raw_writel(val, prm_base + module + idx); -} - -/* Read-modify-write a register in a PRM module. Caller must lock */ -u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) -{ - u32 v; - - v = omap2_prm_read_mod_reg(module, idx); - v &= ~mask; - v |= bits; - omap2_prm_write_mod_reg(v, module, idx); - - return v; -} - -/* Read a PRM register, AND it, and shift the result down to bit 0 */ -u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) -{ - u32 v; - - v = omap2_prm_read_mod_reg(domain, idx); - v &= mask; - v >>= __ffs(mask); - - return v; -} - -u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx); -} - -u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx); -} - +#include "clockdomain.h" /** * omap2_prm_is_hardreset_asserted - read the HW reset line state of @@ -104,9 +34,6 @@ u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) */ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) { - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, (1 << shift)); } @@ -127,9 +54,6 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) { u32 mask; - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - mask = 1 << shift; omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL); @@ -156,9 +80,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) u32 rst, st; int c; - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - rst = 1 << rst_shift; st = 1 << st_shift; @@ -178,188 +99,155 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; } -/* PRM VP */ - -/* - * struct omap3_vp - OMAP3 VP register access description. - * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg - */ -struct omap3_vp { - u32 tranxdone_status; -}; - -static struct omap3_vp omap3_vp[] = { - [OMAP3_VP_VDD_MPU_ID] = { - .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, - }, - [OMAP3_VP_VDD_CORE_ID] = { - .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, - }, -}; - -#define MAX_VP_ID ARRAY_SIZE(omap3_vp); - -u32 omap3_prm_vp_check_txdone(u8 vp_id) -{ - struct omap3_vp *vp = &omap3_vp[vp_id]; - u32 irqstatus; - irqstatus = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - return irqstatus & vp->tranxdone_status; -} +/* Powerdomain low-level functions */ -void omap3_prm_vp_clear_txdone(u8 vp_id) +/* Common functions across OMAP2 and OMAP3 */ +int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) { - struct omap3_vp *vp = &omap3_vp[vp_id]; - - omap2_prm_write_mod_reg(vp->tranxdone_status, - OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); + return 0; } -u32 omap3_prm_vcvp_read(u8 offset) +int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) { - return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL, + OMAP_POWERSTATE_MASK); } -void omap3_prm_vcvp_write(u32 val, u8 offset) +int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm) { - omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTST, + OMAP_POWERSTATEST_MASK); } -u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) { - return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); + u32 m; + + m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); + + omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL); + + return 0; } -/** - * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events - * @events: ptr to a u32, preallocated by caller - * - * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM - * MPU IRQs, and store the result into the u32 pointed to by @events. - * No return value. - */ -void omap3xxx_prm_read_pending_irqs(unsigned long *events) +int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) { - u32 mask, st; + u32 m; + + m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */ - mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL); - events[0] = mask & st; + return 0; } -/** - * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete - * - * Force any buffered writes to the PRM IP block to complete. Needed - * by the PRM IRQ handler, which reads and writes directly to the IP - * block, to avoid race conditions after acknowledging or clearing IRQ - * bits. No return value. - */ -void omap3xxx_prm_ocp_barrier(void) +int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) { - omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); + u32 m; + + m = omap2_pwrdm_get_mem_bank_stst_mask(bank); + + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST, + m); } -/** - * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg - * @saved_mask: ptr to a u32 array to save IRQENABLE bits - * - * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask - * must be allocated by the caller. Intended to be used in the PRM - * interrupt handler suspend callback. The OCP barrier is needed to - * ensure the write to disable PRM interrupts reaches the PRM before - * returning; otherwise, spurious interrupts might occur. No return - * value. - */ -void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) +int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) { - saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQENABLE_MPU_OFFSET); - omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + u32 m; + + m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - /* OCP barrier */ - omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL, m); } -/** - * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args - * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously - * - * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended - * to be used in the PRM interrupt handler resume callback to restore - * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP - * barrier should be needed here; any pending PRM interrupts will fire - * once the writes reach the PRM. No return value. - */ -void omap3xxx_prm_restore_irqen(u32 *saved_mask) +int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) { - omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, - OMAP3_PRM_IRQENABLE_MPU_OFFSET); + u32 v; + + v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK); + omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL); + + return 0; } -/** - * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain - * - * Clear any previously-latched I/O wakeup events and ensure that the - * I/O wakeup gates are aligned with the current mux settings. Works - * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then - * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No - * return value. - */ -void omap3xxx_prm_reconfigure_io_chain(void) +int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm) { - int i = 0; + u32 c = 0; - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ - omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & - OMAP3430_ST_IO_CHAIN_MASK, - MAX_IOPAD_LATCH_TIME, i); - if (i == MAX_IOPAD_LATCH_TIME) - pr_warn("PRM: I/O chain clock line assertion timed out\n"); + /* XXX Is this udelay() value meaningful? */ + while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) & + OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; + } - omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, - PM_WKST); + pr_debug("powerdomain: completed transition in %d loops\n", c); - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); + return 0; } -/** - * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches - * - * Activates the I/O wakeup event latches and allows events logged by - * those latches to signal a wakeup event to the PRCM. For I/O - * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux - * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. - * No return value. - */ -static void __init omap3xxx_prm_enable_io_wakeup(void) +int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); + return 0; +} + +int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); + return 0; +} + +int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { - if (omap3_has_io_wakeup()) - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, - PM_WKEN); + return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, + PM_WKDEP, (1 << clkdm2->dep_bit)); } -static int __init omap3xxx_prcm_init(void) +int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) { - int ret = 0; - - if (cpu_is_omap34xx()) { - omap3xxx_prm_enable_io_wakeup(); - ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - if (!ret) - irq_set_status_flags(omap_prcm_event_to_irq("io"), - IRQ_NOAUTOEN); + struct clkdm_dep *cd; + u32 mask = 0; + + for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + /* PRM accesses are slow, so minimize them */ + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->wkdep_usecount, 0); } - return ret; + omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, + PM_WKDEP); + return 0; } -subsys_initcall(omap3xxx_prcm_init); + diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index c19d249b4816..78532d6fecd7 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -1,7 +1,7 @@ /* - * OMAP2/3 Power/Reset Management (PRM) register definitions + * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions * - * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * @@ -19,160 +19,6 @@ #include "prcm-common.h" #include "prm.h" -#define OMAP2420_PRM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) -#define OMAP2430_PRM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) -#define OMAP34XX_PRM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) - - -/* - * OMAP2-specific global PRM registers - * Use __raw_{read,write}l() with these registers. - * - * With a few exceptions, these are the register names beginning with - * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE - * bits.) - * - */ - -#define OMAP2_PRCM_REVISION_OFFSET 0x0000 -#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) -#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 -#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) - -#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018 -#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c -#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) - -#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 -#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) -#define OMAP2_PRCM_VOLTST_OFFSET 0x0054 -#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) -#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 -#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) -#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 -#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070) -#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078 -#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078) -#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080 -#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) -#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 -#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) -#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 -#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) -#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 -#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) -#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 -#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098) - -#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000) -#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010) - -#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c) - -#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050) -#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054) -#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060) -#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070) -#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078) -#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080) -#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084) -#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090) -#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094) -#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098) - -/* - * OMAP3-specific global PRM registers - * Use __raw_{read,write}l() with these registers. - * - * With a few exceptions, these are the register names beginning with - * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE - * bits.) - */ - -#define OMAP3_PRM_REVISION_OFFSET 0x0004 -#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004) -#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014 -#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014) - -#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018 -#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c -#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c) - - -#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020 -#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) -#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024 -#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) -#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028 -#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) -#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c -#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) -#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030 -#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) -#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034 -#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) -#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038 -#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) -#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c -#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) -#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050 -#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) -#define OMAP3_PRM_RSTTIME_OFFSET 0x0054 -#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) -#define OMAP3_PRM_RSTST_OFFSET 0x0058 -#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) -#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060 -#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) -#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064 -#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) -#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070 -#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) -#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090 -#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) -#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094 -#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) -#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098 -#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) -#define OMAP3_PRM_POLCTRL_OFFSET 0x009c -#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) -#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0 -#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) -#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0 -#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) -#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4 -#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) -#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8 -#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) -#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc -#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) -#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0 -#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) -#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4 -#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) -#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0 -#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) -#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4 -#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) -#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8 -#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) -#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc -#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) -#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0 -#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) -#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4 -#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) - -#define OMAP3_PRM_CLKSEL_OFFSET 0x0040 -#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) -#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070 -#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) - /* * Module specific PRM register offsets from PRM_BASE + domain offset * @@ -200,66 +46,83 @@ #define PM_EVGENONTIM 0x00d8 #define PM_EVGENOFFTIM 0x00dc -/* OMAP2xxx specific register offsets */ -#define OMAP24XX_PM_WKEN2 0x00a4 -#define OMAP24XX_PM_WKST2 0x00b4 - -#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ -#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ -#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 -#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc -/* OMAP3 specific register offsets */ -#define OMAP3430ES2_PM_WKEN3 0x00f0 -#define OMAP3430ES2_PM_WKST3 0x00b8 - -#define OMAP3430_PM_MPUGRPSEL 0x00a4 -#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL -#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8 - -#define OMAP3430_PM_IVAGRPSEL 0x00a8 -#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL -#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4 - -#define OMAP3430_PM_PREPWSTST 0x00e8 - -#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8 -#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#include "powerdomain.h" -#ifndef __ASSEMBLER__ /* Power/reset management domain register get/set */ -extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); -extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx); -extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); -extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx); -extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx); -extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask); +static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) +{ + return __raw_readl(prm_base + module + idx); +} + +static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + __raw_writel(val, prm_base + module + idx); +} + +/* Read-modify-write a register in a PRM module. Caller must lock */ +static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, + s16 idx) +{ + u32 v; + + v = omap2_prm_read_mod_reg(module, idx); + v &= ~mask; + v |= bits; + omap2_prm_write_mod_reg(v, module, idx); + + return v; +} + +/* Read a PRM register, AND it, and shift the result down to bit 0 */ +static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + u32 v; + + v = omap2_prm_read_mod_reg(domain, idx); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx); +} + +static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx); +} /* These omap2_ PRM functions apply to both OMAP2 and 3 */ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); -/* OMAP3-specific VP functions */ -u32 omap3_prm_vp_check_txdone(u8 vp_id); -void omap3_prm_vp_clear_txdone(u8 vp_id); - -/* - * OMAP3 access functions for voltage controller (VC) and - * voltage proccessor (VP) in the PRM. - */ -extern u32 omap3_prm_vcvp_read(u8 offset); -extern void omap3_prm_vcvp_write(u32 val, u8 offset); -extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); - -extern void omap3xxx_prm_reconfigure_io_chain(void); - -/* PRM interrupt-related functions */ -extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); -extern void omap3xxx_prm_ocp_barrier(void); -extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); -extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); +extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); +extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm); +extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm); +extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst); +extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst); +extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); +extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank); +extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); +extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm); + +extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2); +extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2); +extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2); +extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm); #endif /* __ASSEMBLER */ @@ -348,7 +211,9 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); * * 3430: RM_RSTST_CORE, RM_RSTST_EMU */ +#define OMAP_GLOBALWARM_RST_SHIFT 1 #define OMAP_GLOBALWARM_RST_MASK (1 << 1) +#define OMAP_GLOBALCOLD_RST_SHIFT 0 #define OMAP_GLOBALCOLD_RST_MASK (1 << 0) /* @@ -376,11 +241,4 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); #define OMAP_LOGICRETSTATE_MASK (1 << 2) -/* - * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP - * submodule to exit hardreset - */ -#define MAX_MODULE_HARDRESET_WAIT 10000 - - #endif diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index e7dbb6cf1255..1ac73883f891 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,9 +19,8 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> - #include "common.h" +#include "powerdomain.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" @@ -133,3 +132,204 @@ int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; } + +static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= OMAP_POWERSTATE_MASK; + v >>= OMAP_POWERSTATE_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= OMAP_POWERSTATEST_MASK; + v >>= OMAP_POWERSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LASTPOWERSTATEENTERED_MASK; + v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; + + return v; +} + +static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, + (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK, + AM33XX_LASTPOWERSTATEENTERED_MASK, + pwrdm->prcm_offs, pwrdm->pwrstst_offs); + return 0; +} + +static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + u32 m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LOGICSTATEST_MASK; + v >>= AM33XX_LOGICSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm) +{ + u32 v, m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_on_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_ret_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_pwrst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_retst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs) + & OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; + } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + + return 0; +} + +struct pwrdm_ops am33xx_pwrdm_operations = { + .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, + .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, + .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, + .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst, + .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange, + .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst, + .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst, + .pwrdm_wait_transition = am33xx_pwrdm_wait_transition, +}; diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c new file mode 100644 index 000000000000..b86116cf0db9 --- /dev/null +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -0,0 +1,417 @@ +/* + * OMAP3xxx PRM module functions + * + * Copyright (C) 2010-2012 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * Benoît Cousson + * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> + +#include "common.h" +#include <plat/cpu.h> + +#include "vp.h" +#include "powerdomain.h" +#include "prm3xxx.h" +#include "prm2xxx_3xxx.h" +#include "cm2xxx_3xxx.h" +#include "prm-regbits-34xx.h" + +static const struct omap_prcm_irq omap3_prcm_irqs[] = { + OMAP_PRCM_IRQ("wkup", 0, 0), + OMAP_PRCM_IRQ("io", 9, 1), +}; + +static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { + .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, + .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET, + .nr_regs = 1, + .irqs = omap3_prcm_irqs, + .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), + .irq = 11 + OMAP_INTC_START, + .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, + .ocp_barrier = &omap3xxx_prm_ocp_barrier, + .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, + .restore_irqen = &omap3xxx_prm_restore_irqen, +}; + +/* + * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware + * register (which are specific to OMAP3xxx SoCs) to reset source ID + * bit shifts (which is an OMAP SoC-independent enumeration) + */ +static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = { + { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, + { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, + { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, + { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, + { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, + { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, + { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT, + OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT }, + { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT, + OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT }, + { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT }, + { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT }, + { -1, -1 }, +}; + +/* PRM VP */ + +/* + * struct omap3_vp - OMAP3 VP register access description. + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + */ +struct omap3_vp { + u32 tranxdone_status; +}; + +static struct omap3_vp omap3_vp[] = { + [OMAP3_VP_VDD_MPU_ID] = { + .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, + }, + [OMAP3_VP_VDD_CORE_ID] = { + .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, + }, +}; + +#define MAX_VP_ID ARRAY_SIZE(omap3_vp); + +u32 omap3_prm_vp_check_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + u32 irqstatus; + + irqstatus = omap2_prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + return irqstatus & vp->tranxdone_status; +} + +void omap3_prm_vp_clear_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + + omap2_prm_write_mod_reg(vp->tranxdone_status, + OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); +} + +u32 omap3_prm_vcvp_read(u8 offset) +{ + return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); +} + +void omap3_prm_vcvp_write(u32 val, u8 offset) +{ + omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); +} + +u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +{ + return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); +} + +/** + * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC + * + * Set the DPLL3 reset bit, which should reboot the SoC. This is the + * recommended way to restart the SoC, considering Errata i520. No + * return value. + */ +void omap3xxx_prm_dpll3_reset(void) +{ + omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD, + OMAP2_RM_RSTCTRL); + /* OCP barrier */ + omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL); +} + +/** + * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events + * @events: ptr to a u32, preallocated by caller + * + * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM + * MPU IRQs, and store the result into the u32 pointed to by @events. + * No return value. + */ +void omap3xxx_prm_read_pending_irqs(unsigned long *events) +{ + u32 mask, st; + + /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */ + mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + events[0] = mask & st; +} + +/** + * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete + * + * Force any buffered writes to the PRM IP block to complete. Needed + * by the PRM IRQ handler, which reads and writes directly to the IP + * block, to avoid race conditions after acknowledging or clearing IRQ + * bits. No return value. + */ +void omap3xxx_prm_ocp_barrier(void) +{ + omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); +} + +/** + * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg + * @saved_mask: ptr to a u32 array to save IRQENABLE bits + * + * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask + * must be allocated by the caller. Intended to be used in the PRM + * interrupt handler suspend callback. The OCP barrier is needed to + * ensure the write to disable PRM interrupts reaches the PRM before + * returning; otherwise, spurious interrupts might occur. No return + * value. + */ +void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) +{ + saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQENABLE_MPU_OFFSET); + omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + + /* OCP barrier */ + omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); +} + +/** + * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args + * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously + * + * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended + * to be used in the PRM interrupt handler resume callback to restore + * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP + * barrier should be needed here; any pending PRM interrupts will fire + * once the writes reach the PRM. No return value. + */ +void omap3xxx_prm_restore_irqen(u32 *saved_mask) +{ + omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, + OMAP3_PRM_IRQENABLE_MPU_OFFSET); +} + +/** + * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No + * return value. + */ +void omap3xxx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN_MASK, + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, + PM_WKST); + + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); +} + +/** + * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O + * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux + * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. + * No return value. + */ +static void __init omap3xxx_prm_enable_io_wakeup(void) +{ + if (omap3_has_io_wakeup()) + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, + PM_WKEN); +} + +/** + * omap3xxx_prm_read_reset_sources - return the last SoC reset source + * + * Return a u32 representing the last reset sources of the SoC. The + * returned reset source bits are standardized across OMAP SoCs. + */ +static u32 omap3xxx_prm_read_reset_sources(void) +{ + struct prm_reset_src_map *p; + u32 r = 0; + u32 v; + + v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST); + + p = omap3xxx_prm_reset_src_map; + while (p->reg_shift >= 0 && p->std_shift >= 0) { + if (v & (1 << p->reg_shift)) + r |= 1 << p->std_shift; + p++; + } + + return r; +} + +/* Powerdomain low-level functions */ + +/* Applicable only for OMAP3. Not supported on OMAP2 */ +static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP3430_PM_PREPWSTST, + OMAP3430_LASTPOWERSTATEENTERED_MASK); +} + +static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTST, + OMAP3430_LOGICSTATEST_MASK); +} + +static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL, + OMAP3430_LOGICSTATEST_MASK); +} + +static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP3430_PM_PREPWSTST, + OMAP3430_LASTLOGICSTATEENTERED_MASK); +} + +static int omap3_get_mem_bank_lastmemst_mask(u8 bank) +{ + switch (bank) { + case 0: + return OMAP3430_LASTMEM1STATEENTERED_MASK; + case 1: + return OMAP3430_LASTMEM2STATEENTERED_MASK; + case 2: + return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK; + case 3: + return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + return 0; +} + +static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m; + + m = omap3_get_mem_bank_lastmemst_mask(bank); + + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP3430_PM_PREPWSTST, m); +} + +static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST); + return 0; +} + +static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) +{ + return omap2_prm_rmw_mod_reg_bits(0, + 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, + pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); +} + +static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) +{ + return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, + 0, pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL); +} + +struct pwrdm_ops omap3_pwrdm_operations = { + .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst, + .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst, + .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst, + .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst, + .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, + .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, + .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst, + .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst, + .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar, + .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar, + .pwrdm_wait_transition = omap2_pwrdm_wait_transition, +}; + +/* + * + */ + +static struct prm_ll_data omap3xxx_prm_ll_data = { + .read_reset_sources = &omap3xxx_prm_read_reset_sources, +}; + +static int __init omap3xxx_prm_init(void) +{ + int ret; + + if (!cpu_is_omap34xx()) + return 0; + + ret = prm_register(&omap3xxx_prm_ll_data); + if (ret) + return ret; + + omap3xxx_prm_enable_io_wakeup(); + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + + + return ret; +} +subsys_initcall(omap3xxx_prm_init); + +static void __exit omap3xxx_prm_exit(void) +{ + if (!cpu_is_omap34xx()) + return; + + /* Should never happen */ + WARN(prm_unregister(&omap3xxx_prm_ll_data), + "%s: prm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap3xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h new file mode 100644 index 000000000000..10cd41a8129e --- /dev/null +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -0,0 +1,162 @@ +/* + * OMAP3xxx Power/Reset Management (PRM) register definitions + * + * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The PRM hardware modules on the OMAP2/3 are quite similar to each + * other. The PRM on OMAP4 has a new register layout, and is handled + * in a separate file. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_PRM3XXX_H +#define __ARCH_ARM_MACH_OMAP2_PRM3XXX_H + +#include "prcm-common.h" +#include "prm.h" +#include "prm2xxx_3xxx.h" + +#define OMAP34XX_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) + + +/* + * OMAP3-specific global PRM registers + * Use __raw_{read,write}l() with these registers. + * + * With a few exceptions, these are the register names beginning with + * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE + * bits.) + */ + +#define OMAP3_PRM_REVISION_OFFSET 0x0004 +#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004) +#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014 +#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014) + +#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c) + + +#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020 +#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) +#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024 +#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) +#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028 +#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) +#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c +#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) +#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030 +#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) +#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034 +#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) +#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038 +#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) +#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c +#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) +#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050 +#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) +#define OMAP3_PRM_RSTTIME_OFFSET 0x0054 +#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) +#define OMAP3_PRM_RSTST_OFFSET 0x0058 +#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) +#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060 +#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) +#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064 +#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) +#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) +#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090 +#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) +#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094 +#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) +#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098 +#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) +#define OMAP3_PRM_POLCTRL_OFFSET 0x009c +#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) +#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0 +#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) +#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0 +#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) +#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4 +#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) +#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8 +#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) +#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc +#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) +#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0 +#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) +#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4 +#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) +#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0 +#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) +#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4 +#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) +#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8 +#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) +#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc +#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) +#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0 +#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) +#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4 +#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) + +#define OMAP3_PRM_CLKSEL_OFFSET 0x0040 +#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) +#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) + +/* OMAP3 specific register offsets */ +#define OMAP3430ES2_PM_WKEN3 0x00f0 +#define OMAP3430ES2_PM_WKST3 0x00b8 + +#define OMAP3430_PM_MPUGRPSEL 0x00a4 +#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL +#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8 + +#define OMAP3430_PM_IVAGRPSEL 0x00a8 +#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL +#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4 + +#define OMAP3430_PM_PREPWSTST 0x00e8 + +#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8 +#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc + + +#ifndef __ASSEMBLER__ + +/* OMAP3-specific VP functions */ +u32 omap3_prm_vp_check_txdone(u8 vp_id); +void omap3_prm_vp_clear_txdone(u8 vp_id); + +/* + * OMAP3 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap3_prm_vcvp_read(u8 offset); +extern void omap3_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); + +extern void omap3xxx_prm_reconfigure_io_chain(void); + +/* PRM interrupt-related functions */ +extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); +extern void omap3xxx_prm_ocp_barrier(void); +extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); +extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); + +extern void omap3xxx_prm_dpll3_reset(void); + +extern u32 omap3xxx_prm_get_reset_sources(void); + +#endif /* __ASSEMBLER */ + + +#endif diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index f0c4d5f4a174..6d3467af205d 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -1,10 +1,11 @@ /* * OMAP4 PRM module functions * - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011-2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,7 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/prcm.h> #include "soc.h" #include "iomap.h" @@ -27,6 +27,9 @@ #include "prm-regbits-44xx.h" #include "prcm44xx.h" #include "prminst44xx.h" +#include "powerdomain.h" + +/* Static data */ static const struct omap_prcm_irq omap4_prcm_irqs[] = { OMAP_PRCM_IRQ("wkup", 0, 0), @@ -46,6 +49,33 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .restore_irqen = &omap44xx_prm_restore_irqen, }; +/* + * omap44xx_prm_reset_src_map - map from bits in the PRM_RSTST + * hardware register (which are specific to OMAP44xx SoCs) to reset + * source ID bit shifts (which is an OMAP SoC-independent + * enumeration) + */ +static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { + { OMAP4430_RST_GLOBAL_WARM_SW_SHIFT, + OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, + { OMAP4430_RST_GLOBAL_COLD_SW_SHIFT, + OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, + { OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT, + OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, + { OMAP4430_MPU_WDT_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, + { OMAP4430_SECURE_WDT_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT }, + { OMAP4430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, + { OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT, + OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT }, + { OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT, + OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT }, + { OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT, + OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT }, + { OMAP4430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT }, + { OMAP4430_C2C_RST_SHIFT, OMAP_C2C_RST_SRC_ID_SHIFT }, + { -1, -1 }, +}; + /* PRM low-level functions */ /* Read a register in a CM/PRM instance in the PRM module */ @@ -291,12 +321,324 @@ static void __init omap44xx_prm_enable_io_wakeup(void) OMAP4_PRM_IO_PMCTRL_OFFSET); } -static int __init omap4xxx_prcm_init(void) +/** + * omap44xx_prm_read_reset_sources - return the last SoC reset source + * + * Return a u32 representing the last reset sources of the SoC. The + * returned reset source bits are standardized across OMAP SoCs. + */ +static u32 omap44xx_prm_read_reset_sources(void) +{ + struct prm_reset_src_map *p; + u32 r = 0; + u32 v; + + v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + OMAP4_RM_RSTST); + + p = omap44xx_prm_reset_src_map; + while (p->reg_shift >= 0 && p->std_shift >= 0) { + if (v & (1 << p->reg_shift)) + r |= 1 << p->std_shift; + p++; + } + + return r; +} + +/* Powerdomain low-level functions */ + +static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_partition, + pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL); + return 0; +} + +static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + v &= OMAP_POWERSTATE_MASK; + v >>= OMAP_POWERSTATE_SHIFT; + + return v; +} + +static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTST); + v &= OMAP_POWERSTATEST_MASK; + v >>= OMAP_POWERSTATEST_SHIFT; + + return v; +} + +static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTST); + v &= OMAP4430_LASTPOWERSTATEENTERED_MASK; + v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT; + + return v; +} + +static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) +{ + omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK, + (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT), + pwrdm->prcm_partition, + pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL); + return 0; +} + +static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK, + OMAP4430_LASTPOWERSTATEENTERED_MASK, + pwrdm->prcm_partition, + pwrdm->prcm_offs, OMAP4_PM_PWSTST); + return 0; +} + +static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + u32 v; + + v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK); + omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v, + pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + + return 0; +} + +static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); + + omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + + return 0; +} + +static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = omap2_pwrdm_get_mem_bank_retst_mask(bank); + + omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + + return 0; +} + +static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTST); + v &= OMAP4430_LOGICSTATEST_MASK; + v >>= OMAP4430_LOGICSTATEST_SHIFT; + + return v; +} + +static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm) { - if (cpu_is_omap44xx()) { - omap44xx_prm_enable_io_wakeup(); - return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + v &= OMAP4430_LOGICRETSTATE_MASK; + v >>= OMAP4430_LOGICRETSTATE_SHIFT; + + return v; +} + +/** + * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate + * @pwrdm: struct powerdomain * to read the state for + * + * Reads the previous logic powerstate for a powerdomain. This + * function must determine the previous logic powerstate by first + * checking the previous powerstate for the domain. If that was OFF, + * then logic has been lost. If previous state was RETENTION, the + * function reads the setting for the next retention logic state to + * see the actual value. In every other case, the logic is + * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET + * depending whether the logic was retained or not. + */ +static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) +{ + int state; + + state = omap4_pwrdm_read_prev_pwrst(pwrdm); + + if (state == PWRDM_POWER_OFF) + return PWRDM_POWER_OFF; + + if (state != PWRDM_POWER_RET) + return PWRDM_POWER_RET; + + return omap4_pwrdm_read_logic_retst(pwrdm); +} + +static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = omap2_pwrdm_get_mem_bank_stst_mask(bank); + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTST); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = omap2_pwrdm_get_mem_bank_retst_mask(bank); + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + v &= m; + v >>= __ffs(m); + + return v; +} + +/** + * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate + * @pwrdm: struct powerdomain * to read mem powerstate for + * @bank: memory bank index + * + * Reads the previous memory powerstate for a powerdomain. This + * function must determine the previous memory powerstate by first + * checking the previous powerstate for the domain. If that was OFF, + * then logic has been lost. If previous state was RETENTION, the + * function reads the setting for the next memory retention state to + * see the actual value. In every other case, the logic is + * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET + * depending whether logic was retained or not. + */ +static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + int state; + + state = omap4_pwrdm_read_prev_pwrst(pwrdm); + + if (state == PWRDM_POWER_OFF) + return PWRDM_POWER_OFF; + + if (state != PWRDM_POWER_RET) + return PWRDM_POWER_RET; + + return omap4_pwrdm_read_mem_retst(pwrdm, bank); +} + +static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition, + pwrdm->prcm_offs, + OMAP4_PM_PWSTST) & + OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + return 0; } -subsys_initcall(omap4xxx_prcm_init); + +struct pwrdm_ops omap4_pwrdm_operations = { + .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst, + .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange, + .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst, + .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst, + .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst, + .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst, + .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst, + .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst, + .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst, + .pwrdm_wait_transition = omap4_pwrdm_wait_transition, +}; + +/* + * XXX document + */ +static struct prm_ll_data omap44xx_prm_ll_data = { + .read_reset_sources = &omap44xx_prm_read_reset_sources, +}; + +static int __init omap44xx_prm_init(void) +{ + int ret; + + if (!cpu_is_omap44xx()) + return 0; + + ret = prm_register(&omap44xx_prm_ll_data); + if (ret) + return ret; + + omap44xx_prm_enable_io_wakeup(); + + return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); +} +subsys_initcall(omap44xx_prm_init); + +static void __exit omap44xx_prm_exit(void) +{ + if (!cpu_is_omap44xx()) + return; + + /* Should never happen */ + WARN(prm_unregister(&omap44xx_prm_ll_data), + "%s: prm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap44xx_prm_exit); diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index ee72ae6bd8c9..c8e1accdc90e 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -771,6 +771,8 @@ extern void omap44xx_prm_ocp_barrier(void); extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); extern void omap44xx_prm_restore_irqen(u32 *saved_mask); +extern u32 omap44xx_prm_get_reset_sources(void); + # endif #endif diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 6b4d332be2f6..f596e1e91ffd 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,11 +24,11 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include <plat/common.h> -#include <plat/prcm.h> - #include "prm2xxx_3xxx.h" +#include "prm2xxx.h" +#include "prm3xxx.h" #include "prm44xx.h" +#include "common.h" /* * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs @@ -53,6 +53,16 @@ static struct irq_chip_generic **prcm_irq_chips; */ static struct omap_prcm_irq_setup *prcm_irq_setup; +/* prm_base: base virtual address of the PRM IP block */ +void __iomem *prm_base; + +/* + * prm_ll_data: function pointers to SoC-specific implementations of + * common PRM functions + */ +static struct prm_ll_data null_prm_ll_data; +static struct prm_ll_data *prm_ll_data = &null_prm_ll_data; + /* Private functions */ /* @@ -319,64 +329,82 @@ err: return -ENOMEM; } -/* - * Stubbed functions so that common files continue to build when - * custom builds are used - * XXX These are temporary and should be removed at the earliest possible - * opportunity +/** + * omap2_set_globals_prm - set the PRM base address (for early use) + * @prm: PRM base virtual address + * + * XXX Will be replaced when the PRM/CM drivers are completed. */ -u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx) +void __init omap2_set_globals_prm(void __iomem *prm) { - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; + prm_base = prm; } -void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +/** + * prm_read_reset_sources - return the sources of the SoC's last reset + * + * Return a u32 bitmask representing the reset sources that caused the + * SoC to reset. The low-level per-SoC functions called by this + * function remap the SoC-specific reset source bits into an + * OMAP-common set of reset source bits, defined in + * arch/arm/mach-omap2/prm.h. Returns the standardized reset source + * u32 bitmask from the hardware upon success, or returns (1 << + * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources() + * function was registered. + */ +u32 prm_read_reset_sources(void) { - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); -} + u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT; -u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, - s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; -} + if (prm_ll_data->read_reset_sources) + ret = prm_ll_data->read_reset_sources(); + else + WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__); -u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; + return ret; } -u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +/** + * prm_register - register per-SoC low-level data with the PRM + * @pld: low-level per-SoC OMAP PRM data & function pointers to register + * + * Register per-SoC low-level OMAP PRM data and function pointers with + * the OMAP PRM common interface. The caller must keep the data + * pointed to by @pld valid until it calls prm_unregister() and + * it returns successfully. Returns 0 upon success, -EINVAL if @pld + * is NULL, or -EEXIST if prm_register() has already been called + * without an intervening prm_unregister(). + */ +int prm_register(struct prm_ll_data *pld) { - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; -} + if (!pld) + return -EINVAL; -u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; -} + if (prm_ll_data != &null_prm_ll_data) + return -EEXIST; -int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; -} + prm_ll_data = pld; -int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); return 0; } -int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, - u8 st_shift) +/** + * prm_unregister - unregister per-SoC low-level data & function pointers + * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister + * + * Unregister per-SoC low-level OMAP PRM data and function pointers + * that were previously registered with prm_register(). The + * caller may not destroy any of the data pointed to by @pld until + * this function returns successfully. Returns 0 upon success, or + * -EINVAL if @pld is NULL or if @pld does not match the struct + * prm_ll_data * previously registered by prm_register(). + */ +int prm_unregister(struct prm_ll_data *pld) { - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + if (!pld || prm_ll_data != pld) + return -EINVAL; + + prm_ll_data = &null_prm_ll_data; + return 0; } - diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index 46f2efb36596..a2ede2d65481 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h @@ -30,4 +30,6 @@ extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, u16 rstctrl_offs); +extern void omap_prm_base_init(void); + #endif diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h index 8bfaf342a028..1ee58c281a31 100644 --- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h +++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM #define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM -#include <plat/sdrc.h> +#include "sdrc.h" /* Hynix H8MBX00U0MER-0EM */ static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h index a391b4939f74..85cccc004c06 100644 --- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#include <plat/sdrc.h> +#include "sdrc.h" /* Micron MT46H32M32LF-6 */ /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index 845c4fd2b125..0fa7ffa9b5ed 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -18,10 +18,8 @@ #include <linux/io.h> #include "common.h" -#include <plat/clock.h> -#include <plat/sdrc.h> - #include "sdram-nokia.h" +#include "sdrc.h" /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */ struct sdram_timings { diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h index cd4352917022..003f7bf4e2e3 100644 --- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h +++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM #define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM -#include <plat/sdrc.h> +#include "sdrc.h" /* Numonyx M65KXXXXAM */ static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h index 0e518a72831f..8dc3de5ebb5b 100644 --- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#include <plat/sdrc.h> +#include "sdrc.h" /* Qimonda HYB18M512160AF-6 */ static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index e3d345f46409..dae7e4804a48 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -24,10 +24,7 @@ #include <linux/io.h> #include "common.h" -#include <plat/clock.h> -#include <plat/sram.h> - -#include <plat/sdrc.h> +#include "clock.h" #include "sdrc.h" static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; @@ -115,12 +112,10 @@ int omap2_sdrc_get_params(unsigned long r, } -void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) +void __init omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms) { - if (omap2_globals->sdrc) - omap2_sdrc_base = omap2_globals->sdrc; - if (omap2_globals->sms) - omap2_sms_base = omap2_globals->sms; + omap2_sdrc_base = sdrc; + omap2_sms_base = sms; } /** @@ -160,19 +155,3 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } - -void omap2_sms_write_rot_control(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_CONTROL(ctx)); -} - -void omap2_sms_write_rot_size(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_SIZE(ctx)); -} - -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); -} - diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index b3f83799e6cf..446aa13511fd 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -2,12 +2,14 @@ #define __ARCH_ARM_MACH_OMAP2_SDRC_H /* - * OMAP2 SDRC register definitions + * OMAP2/3 SDRC/SMS macros and prototypes * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * - * Written by Paul Walmsley + * Paul Walmsley + * Tony Lindgren + * Richard Woodruff * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,8 +17,6 @@ */ #undef DEBUG -#include <plat/sdrc.h> - #ifndef __ASSEMBLER__ #include <linux/io.h> @@ -50,6 +50,60 @@ static inline u32 sms_read_reg(u16 reg) { return __raw_readl(OMAP_SMS_REGADDR(reg)); } + +extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms); + + +/** + * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate + * @rate: SDRC clock rate (in Hz) + * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate + * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate + * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate + * @mr: Value to program to SDRC_MR for this rate + * + * This structure holds a pre-computed set of register values for the + * SDRC for a given SDRC clock rate and SDRAM chip. These are + * intended to be pre-computed and specified in an array in the board-*.c + * files. The structure is keyed off the 'rate' field. + */ +struct omap_sdrc_params { + unsigned long rate; + u32 actim_ctrla; + u32 actim_ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + +#ifdef CONFIG_SOC_HAS_OMAP2_SDRC +void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +#else +static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) {}; +#endif + +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); +void omap2_sms_save_context(void); +void omap2_sms_restore_context(void); + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); +struct omap_sdrc_params *rx51_get_sdram_timings(void); + +u32 omap2xxx_sdrc_dll_is_unlocked(void); +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); + + #else #define OMAP242X_SDRC_REGADDR(reg) \ OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) @@ -57,6 +111,7 @@ static inline u32 sms_read_reg(u16 reg) OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) #define OMAP34XX_SDRC_REGADDR(reg) \ OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) + #endif /* __ASSEMBLER__ */ /* Minimum frequency that the SDRC DLL can lock at */ @@ -74,4 +129,85 @@ static inline u32 sms_read_reg(u16 reg) */ #define SDRC_MPURATE_LOOPS 96 +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_CS_CFG 0x040 +#define SDRC_SHARING 0x044 +#define SDRC_ERR_TYPE 0x04C +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MCFG_0 0x080 +#define SDRC_MR_0 0x084 +#define SDRC_EMR2_0 0x08c +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 +#define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MANUAL_0 0x0a8 +#define SDRC_MCFG_1 0x0B0 +#define SDRC_MR_1 0x0B4 +#define SDRC_EMR2_1 0x0BC +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 +#define SDRC_MANUAL_1 0x0D8 + +#define SDRC_POWER_AUTOCOUNT_SHIFT 8 +#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) +#define SDRC_POWER_CLKCTRL_SHIFT 4 +#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) +#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + +#define OMAP242X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + + + #endif diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 73e55e485329..907291714643 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,16 +24,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "soc.h" #include "iomap.h" #include "common.h" -#include "prm2xxx_3xxx.h" +#include "prm2xxx.h" #include "clock.h" #include "sdrc.h" +#include "sram.h" /* Memory timing, DLL mode flags */ #define M_DDR 1 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index a507cd6cf4f1..aa30a3c20883 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -28,19 +28,20 @@ #include <linux/console.h> #include <plat/omap-serial.h> -#include "common.h" -#include <plat/dma.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> -#include <plat/serial.h> +#include <plat-omap/dma-omap.h> +#include "common.h" +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" +#include "soc.h" #include "prm2xxx_3xxx.h" #include "pm.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-34xx.h" #include "control.h" #include "mux.h" +#include "serial.h" /* * NOTE: By default the serial auto_suspend timeout is disabled as it causes diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h new file mode 100644 index 000000000000..c4014f013df0 --- /dev/null +++ b/arch/arm/mach-omap2/serial.h @@ -0,0 +1 @@ +#include <mach/serial.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 506987979c1c..d1dedc8195ed 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,13 +26,12 @@ #include <asm/assembler.h> -#include <plat/sram.h> - #include "omap34xx.h" #include "iomap.h" -#include "cm2xxx_3xxx.h" -#include "prm2xxx_3xxx.h" +#include "cm3xxx.h" +#include "prm3xxx.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index fc9b96daf851..f31d90774de0 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -1,7 +1,469 @@ -#include <plat/cpu.h> +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + #include "omap24xx.h" #include "omap34xx.h" #include "omap44xx.h" #include "ti81xx.h" #include "am33xx.h" #include "omap54xx.h" + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP2 +#undef OMAP_NAME + +#ifdef CONFIG_SOC_OMAP2420 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2420 +# endif +#endif +#ifdef CONFIG_SOC_OMAP2430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2430 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP3 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap3 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP4 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap4 +# endif +#endif + +#ifdef CONFIG_SOC_OMAP5 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap5 +# endif +#endif + +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * cpu_is_omap243x(): True for OMAP2430 + * cpu_is_omap343x(): True for OMAP3430 + * cpu_is_omap443x(): True for OMAP4430 + * cpu_is_omap446x(): True for OMAP4460 + * cpu_is_omap447x(): True for OMAP4470 + * soc_is_omap543x(): True for OMAP5430, OMAP5432 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_AM_CLASS(class, id) \ +static inline int is_am ##class (void) \ +{ \ + return (GET_AM_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_TI_CLASS(class, id) \ +static inline int is_ti ##class (void) \ +{ \ + return (GET_TI_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +#define IS_TI_SUBCLASS(subclass, id) \ +static inline int is_ti ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +#define IS_AM_SUBCLASS(subclass, id) \ +static inline int is_am ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(24xx, 0x24) +IS_OMAP_CLASS(34xx, 0x34) +IS_OMAP_CLASS(44xx, 0x44) +IS_AM_CLASS(35xx, 0x35) +IS_OMAP_CLASS(54xx, 0x54) +IS_AM_CLASS(33xx, 0x33) + +IS_TI_CLASS(81xx, 0x81) + +IS_OMAP_SUBCLASS(242x, 0x242) +IS_OMAP_SUBCLASS(243x, 0x243) +IS_OMAP_SUBCLASS(343x, 0x343) +IS_OMAP_SUBCLASS(363x, 0x363) +IS_OMAP_SUBCLASS(443x, 0x443) +IS_OMAP_SUBCLASS(446x, 0x446) +IS_OMAP_SUBCLASS(447x, 0x447) +IS_OMAP_SUBCLASS(543x, 0x543) + +IS_TI_SUBCLASS(816x, 0x816) +IS_TI_SUBCLASS(814x, 0x814) +IS_AM_SUBCLASS(335x, 0x335) + +#define cpu_is_omap24xx() 0 +#define cpu_is_omap242x() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap343x() 0 +#define cpu_is_ti81xx() 0 +#define cpu_is_ti816x() 0 +#define cpu_is_ti814x() 0 +#define soc_is_am35xx() 0 +#define soc_is_am33xx() 0 +#define soc_is_am335x() 0 +#define cpu_is_omap44xx() 0 +#define cpu_is_omap443x() 0 +#define cpu_is_omap446x() 0 +#define cpu_is_omap447x() 0 +#define soc_is_omap54xx() 0 +#define soc_is_omap543x() 0 + +#if defined(MULTI_OMAP2) +# if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() is_omap24xx() +# endif +# if defined (CONFIG_SOC_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() is_omap242x() +# endif +# if defined (CONFIG_SOC_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() is_omap243x() +# endif +# if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap34xx +# undef cpu_is_omap343x +# define cpu_is_omap34xx() is_omap34xx() +# define cpu_is_omap343x() is_omap343x() +# endif +#else +# if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() 1 +# endif +# if defined(CONFIG_SOC_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() 1 +# endif +# if defined(CONFIG_SOC_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap34xx +# define cpu_is_omap34xx() 1 +# endif +# if defined(CONFIG_SOC_OMAP3430) +# undef cpu_is_omap343x +# define cpu_is_omap343x() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap2420(): True for OMAP2420 + * cpu_is_omap2422(): True for OMAP2422 + * cpu_is_omap2423(): True for OMAP2423 + * cpu_is_omap2430(): True for OMAP2430 + * cpu_is_omap3430(): True for OMAP3430 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(2420, 0x2420) +IS_OMAP_TYPE(2422, 0x2422) +IS_OMAP_TYPE(2423, 0x2423) +IS_OMAP_TYPE(2430, 0x2430) +IS_OMAP_TYPE(3430, 0x3430) + +#define cpu_is_omap2420() 0 +#define cpu_is_omap2422() 0 +#define cpu_is_omap2423() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap3430() 0 +#define cpu_is_omap3630() 0 +#define soc_is_omap5430() 0 + +/* These are needed for the common code */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 +#define cpu_class_is_omap1() 0 +#define cpu_class_is_omap2() 1 +#endif + +#if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap2420 +# undef cpu_is_omap2422 +# undef cpu_is_omap2423 +# undef cpu_is_omap2430 +# define cpu_is_omap2420() is_omap2420() +# define cpu_is_omap2422() is_omap2422() +# define cpu_is_omap2423() is_omap2423() +# define cpu_is_omap2430() is_omap2430() +#endif + +#if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap3430 +# undef cpu_is_ti81xx +# undef cpu_is_ti816x +# undef cpu_is_ti814x +# undef soc_is_am35xx +# define cpu_is_omap3430() is_omap3430() +# undef cpu_is_omap3630 +# define cpu_is_omap3630() is_omap363x() +# define cpu_is_ti81xx() is_ti81xx() +# define cpu_is_ti816x() is_ti816x() +# define cpu_is_ti814x() is_ti814x() +# define soc_is_am35xx() is_am35xx() +#endif + +# if defined(CONFIG_SOC_AM33XX) +# undef soc_is_am33xx +# undef soc_is_am335x +# define soc_is_am33xx() is_am33xx() +# define soc_is_am335x() is_am335x() +#endif + +# if defined(CONFIG_ARCH_OMAP4) +# undef cpu_is_omap44xx +# undef cpu_is_omap443x +# undef cpu_is_omap446x +# undef cpu_is_omap447x +# define cpu_is_omap44xx() is_omap44xx() +# define cpu_is_omap443x() is_omap443x() +# define cpu_is_omap446x() is_omap446x() +# define cpu_is_omap447x() is_omap447x() +# endif + +# if defined(CONFIG_SOC_OMAP5) +# undef soc_is_omap54xx +# undef soc_is_omap543x +# define soc_is_omap54xx() is_omap54xx() +# define soc_is_omap543x() is_omap543x() +#endif + +/* Various silicon revisions for omap2 */ +#define OMAP242X_CLASS 0x24200024 +#define OMAP2420_REV_ES1_0 OMAP242X_CLASS +#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) + +#define OMAP243X_CLASS 0x24300024 +#define OMAP2430_REV_ES1_0 OMAP243X_CLASS + +#define OMAP343X_CLASS 0x34300034 +#define OMAP3430_REV_ES1_0 OMAP343X_CLASS +#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) +#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) +#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) +#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) +#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) + +#define OMAP363X_CLASS 0x36300034 +#define OMAP3630_REV_ES1_0 OMAP363X_CLASS +#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) +#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) + +#define TI816X_CLASS 0x81600034 +#define TI8168_REV_ES1_0 TI816X_CLASS +#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) + +#define TI814X_CLASS 0x81400034 +#define TI8148_REV_ES1_0 TI814X_CLASS +#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) +#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) + +#define AM35XX_CLASS 0x35170034 +#define AM35XX_REV_ES1_0 AM35XX_CLASS +#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) + +#define AM335X_CLASS 0x33500033 +#define AM335X_REV_ES1_0 AM335X_CLASS + +#define OMAP443X_CLASS 0x44300044 +#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) +#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) +#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) +#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) +#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) + +#define OMAP446X_CLASS 0x44600044 +#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) +#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8)) + +#define OMAP447X_CLASS 0x44700044 +#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) + +#define OMAP54XX_CLASS 0x54000054 +#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) + +void omap2xxx_check_revision(void); +void omap3xxx_check_revision(void); +void omap4xxx_check_revision(void); +void omap5xxx_check_revision(void); +void omap3xxx_check_features(void); +void ti81xx_check_features(void); +void omap4xxx_check_features(void); + +/* + * Runtime detection of OMAP3 features + * + * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip + * family have OS-level control over the I/O chain clock. This is + * to avoid a window during which wakeups could potentially be lost + * during powerdomain transitions. If this bit is set, it + * indicates that the chip does support OS-level control of this + * feature. + */ +extern u32 omap_features; + +#define OMAP3_HAS_L2CACHE BIT(0) +#define OMAP3_HAS_IVA BIT(1) +#define OMAP3_HAS_SGX BIT(2) +#define OMAP3_HAS_NEON BIT(3) +#define OMAP3_HAS_ISP BIT(4) +#define OMAP3_HAS_192MHZ_CLK BIT(5) +#define OMAP3_HAS_IO_WAKEUP BIT(6) +#define OMAP3_HAS_SDRC BIT(7) +#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) +#define OMAP4_HAS_PERF_SILICON BIT(9) + + +#define OMAP3_HAS_FEATURE(feat,flag) \ +static inline unsigned int omap3_has_ ##feat(void) \ +{ \ + return omap_features & OMAP3_HAS_ ##flag; \ +} \ + +OMAP3_HAS_FEATURE(l2cache, L2CACHE) +OMAP3_HAS_FEATURE(sgx, SGX) +OMAP3_HAS_FEATURE(iva, IVA) +OMAP3_HAS_FEATURE(neon, NEON) +OMAP3_HAS_FEATURE(isp, ISP) +OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) +OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) +OMAP3_HAS_FEATURE(sdrc, SDRC) +OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) + +/* + * Runtime detection of OMAP4 features + */ +#define OMAP4_HAS_FEATURE(feat, flag) \ +static inline unsigned int omap4_has_ ##feat(void) \ +{ \ + return omap_features & OMAP4_HAS_ ##flag; \ +} \ + +OMAP4_HAS_FEATURE(perf_silicon, PERF_SILICON) + +#endif /* __ASSEMBLY__ */ + diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index f8217a5a4a26..b0e77a407047 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -23,8 +23,8 @@ #include <linux/slab.h> #include <linux/io.h> -#include <plat/omap_device.h> - +#include "soc.h" +#include "omap_device.h" #include "voltage.h" #include "control.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c new file mode 100644 index 000000000000..0ff0f068bea8 --- /dev/null +++ b/arch/arm/mach-omap2/sram.c @@ -0,0 +1,305 @@ +/* + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "iomap.h" +#include "prm2xxx_3xxx.h" +#include "sdrc.h" +#include "sram.h" + +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA +#else +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#endif +#define OMAP5_SRAM_PA 0x40300000 + +#define SRAM_BOOTLOADER_SZ 0x00 + +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) + +#define GP_DEVICE 0x300 + +#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) + +static unsigned long omap_sram_start; +static unsigned long omap_sram_skip; +static unsigned long omap_sram_size; + +/* + * Depending on the target RAMFS firewall setup, the public usable amount of + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This + * functionality seems ok until some nice security API happens. + */ +static int is_sram_locked(void) +{ + if (OMAP2_DEVICE_TYPE_GP == omap_type()) { + /* RAMFW: R/W access to all initiators for all qualifier sets */ + if (cpu_is_omap242x()) { + __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + } + if (cpu_is_omap34xx()) { + __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); + __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + } + return 0; + } else + return 1; /* assume locked with no PPA or security driver */ +} + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_sram(void) +{ + omap_sram_skip = SRAM_BOOTLOADER_SZ; + if (is_sram_locked()) { + if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PUB_PA; + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; + } else { + omap_sram_size = 0x8000; /* 32K */ + } + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PUB_PA; + omap_sram_size = 0x800; /* 2K */ + } + } else { + if (soc_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PA; + omap_sram_size = 0xe000; /* 56K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PA; + if (cpu_is_omap242x()) + omap_sram_size = 0xa0000; /* 640K */ + else if (cpu_is_omap243x()) + omap_sram_size = 0x10000; /* 64K */ + } + } +} + +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +static void __init omap2_map_sram(void) +{ + int cached = 1; + +#ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { + omap_sram_start += PAGE_SIZE; + omap_sram_size -= SZ_16K; + } +#endif + if (cpu_is_omap34xx()) { + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + cached = 0; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, cached); +} + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + BUG_ON(!_omap2_sram_ddr_init); + _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + BUG_ON(!_omap2_sram_reprogram_sdrc); + _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + BUG_ON(!_omap2_set_prcm); + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +#ifdef CONFIG_SOC_OMAP2420 +static int __init omap242x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, + omap242x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, + omap242x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, + omap242x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap242x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static int __init omap243x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, + omap243x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, + omap243x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, + omap243x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap243x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 + +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) +{ + BUG_ON(!_omap3_sram_configure_core_dpll); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); +} + +void omap3_sram_restore_context(void) +{ + omap_sram_reset(); + + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); + omap_push_sram_idle(); +} + +static inline int omap34xx_sram_init(void) +{ + omap3_sram_restore_context(); + return 0; +} +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +static inline int am33xx_sram_init(void) +{ + return 0; +} + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap2_map_sram(); + + if (cpu_is_omap242x()) + omap242x_sram_init(); + else if (cpu_is_omap2430()) + omap243x_sram_init(); + else if (soc_is_am33xx()) + am33xx_sram_init(); + else if (cpu_is_omap34xx()) + omap34xx_sram_init(); + + return 0; +} diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h new file mode 100644 index 000000000000..ca7277c2a9ee --- /dev/null +++ b/arch/arm/mach-omap2/sram.h @@ -0,0 +1,83 @@ +/* + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASSEMBLY__ +#include <plat/sram.h> + +extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern void omap3_sram_restore_context(void); + +/* Do not use these */ +extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap24xx_sram_reprogram_clock_sz; + +extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap242x_sram_ddr_init_sz; + +extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap242x_sram_set_prcm_sz; + +extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap242x_sram_reprogram_sdrc_sz; + + +extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap243x_sram_ddr_init_sz; + +extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap243x_sram_set_prcm_sz; + +extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern unsigned long omap3_sram_configure_core_dpll_sz; + +#ifdef CONFIG_PM +extern void omap_push_sram_idle(void); +#else +static inline void omap_push_sram_idle(void) {} +#endif /* CONFIG_PM */ + +#endif /* __ASSEMBLY__ */ + +/* + * OMAP2+: define the SRAM PA addresses. + * Used by the SRAM management code and the idle sleep code. + */ +#define OMAP2_SRAM_PA 0x40200000 +#define OMAP3_SRAM_PA 0x40200000 +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PA 0x40304000 +#define OMAP4_SRAM_VA 0xfe404000 +#else +#define OMAP4_SRAM_PA 0x40300000 +#endif +#define AM33XX_SRAM_PA 0x40300000 diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 8f7326cd435b..680a7c56cc3e 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -34,8 +34,8 @@ #include "soc.h" #include "iomap.h" -#include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" +#include "prm2xxx.h" +#include "cm2xxx.h" #include "sdrc.h" .text diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index b140d6578529..a1e9edd673f4 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -34,8 +34,8 @@ #include "soc.h" #include "iomap.h" -#include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" +#include "prm2xxx.h" +#include "cm2xxx.h" #include "sdrc.h" .text diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 2d0ceaa23fb8..1446331b576a 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -32,7 +32,7 @@ #include "soc.h" #include "iomap.h" #include "sdrc.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" /* * This file needs be built unconditionally as ARM to interoperate correctly diff --git a/arch/arm/mach-omap2/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h index 8f9843f78422..a1e6caf0dba6 100644 --- a/arch/arm/mach-omap2/ti81xx.h +++ b/arch/arm/mach-omap2/ti81xx.h @@ -22,6 +22,15 @@ #define TI81XX_CTRL_BASE TI81XX_SCM_BASE #define TI81XX_PRCM_BASE 0x48180000 +/* + * Adjust TAP register base such that omap3_check_revision accesses the correct + * TI81XX register for checking device ID (it adds 0x204 to tap base while + * TI81XX DEVICE ID register is at offset 0x600 from control base). + */ +#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \ + TI81XX_CONTROL_DEVICE_ID - 0x204) + + #define TI81XX_ARM_INTC_BASE 0x48200000 #endif /* __ASM_ARCH_TI81XX_H */ diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 69e46631a7cd..7016637b531c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -37,16 +37,21 @@ #include <linux/clockchips.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> #include <asm/sched_clock.h> #include <asm/arch_timer.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include <plat/counter-32k.h> #include <plat/dmtimer.h> -#include <plat/omap-pm.h> +#include "omap-pm.h" #include "soc.h" #include "common.h" @@ -61,18 +66,6 @@ #define OMAP3_32K_SOURCE "omap_32k_fck" #define OMAP4_32K_SOURCE "sys_32k_ck" -#ifdef CONFIG_OMAP_32K_TIMER -#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE -#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE -#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE -#define OMAP3_SECURE_TIMER 12 -#else -#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE -#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE -#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE -#define OMAP3_SECURE_TIMER 1 -#endif - #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 @@ -103,7 +96,7 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST, - 0xffffffff - cycles, 1); + 0xffffffff - cycles, OMAP_TIMER_POSTED); return 0; } @@ -113,7 +106,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - __omap_dm_timer_stop(&clkev, 1, clkev.rate); + __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -121,10 +114,10 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, period -= 1; /* Looks like we need to first set the load value separately */ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -144,36 +137,144 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +static struct property device_disabled = { + .name = "status", + .length = sizeof("disabled"), + .value = "disabled", +}; + +static struct of_device_id omap_timer_match[] __initdata = { + { .compatible = "ti,omap2-timer", }, + { } +}; + +/** + * omap_get_timer_dt - get a timer using device-tree + * @match - device-tree match structure for matching a device type + * @property - optional timer property to match + * + * Helper function to get a timer during early boot using device-tree for use + * as kernel system timer. Optionally, the property argument can be used to + * select a timer with a specific property. Once a timer is found then mark + * the timer node in device-tree as disabled, to prevent the kernel from + * registering this timer as a platform device and so no one else can use it. + */ +static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, + const char *property) +{ + struct device_node *np; + + for_each_matching_node(np, match) { + if (!of_device_is_available(np)) { + of_node_put(np); + continue; + } + + if (property && !of_get_property(np, property, NULL)) { + of_node_put(np); + continue; + } + + prom_add_property(np, &device_disabled); + return np; + } + + return NULL; +} + +/** + * omap_dmtimer_init - initialisation function when device tree is used + * + * For secure OMAP3 devices, timers with device type "timer-secure" cannot + * be used by the kernel as they are reserved. Therefore, to prevent the + * kernel registering these devices remove them dynamically from the device + * tree on boot. + */ +void __init omap_dmtimer_init(void) +{ + struct device_node *np; + + if (!cpu_is_omap34xx()) + return; + + /* If we are a secure device, remove any secure timer nodes */ + if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { + np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); + if (np) + of_node_put(np); + } +} + +/** + * omap_dm_timer_get_errata - get errata flags for a timer + * + * Get the timer errata flags that are specific to the OMAP device being used. + */ +u32 __init omap_dm_timer_get_errata(void) +{ + if (cpu_is_omap24xx()) + return 0; + + return OMAP_TIMER_ERRATA_I103_I767; +} + static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + const char *oh_name; + struct device_node *np; struct omap_hwmod *oh; - struct resource irq_rsrc, mem_rsrc; - size_t size; - int res = 0; - int r; - - sprintf(name, "timer%d", gptimer_id); - omap_hwmod_setup_one(name); - oh = omap_hwmod_lookup(name); + struct resource irq, mem; + int r = 0; + + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_timer_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + + timer->irq = irq_of_parse_and_map(np, 0); + if (!timer->irq) + return -ENXIO; + + timer->io_base = of_iomap(np, 0); + + of_node_put(np); + } else { + if (omap_dm_timer_reserve_systimer(gptimer_id)) + return -ENODEV; + + sprintf(name, "timer%d", gptimer_id); + oh_name = name; + } + + oh = omap_hwmod_lookup(oh_name); if (!oh) return -ENODEV; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc); - if (r) - return -ENXIO; - timer->irq = irq_rsrc.start; + if (!of_have_populated_dt()) { + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, + &irq); + if (r) + return -ENXIO; + timer->irq = irq.start; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc); - if (r) - return -ENXIO; - timer->phys_base = mem_rsrc.start; - size = mem_rsrc.end - mem_rsrc.start; + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, + &mem); + if (r) + return -ENXIO; + + /* Static mapping, never released */ + timer->io_base = ioremap(mem.start, mem.end - mem.start); + } - /* Static mapping, never released */ - timer->io_base = ioremap(timer->phys_base, size); if (!timer->io_base) return -ENXIO; @@ -182,42 +283,56 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(timer->fclk)) return -ENODEV; - omap_hwmod_enable(oh); - - if (omap_dm_timer_reserve_systimer(gptimer_id)) - return -ENODEV; - + /* FIXME: Need to remove hard-coded test on timer ID */ if (gptimer_id != 12) { struct clk *src; src = clk_get(NULL, fck_source); if (IS_ERR(src)) { - res = -EINVAL; + r = -EINVAL; } else { - res = __omap_dm_timer_set_source(timer->fclk, src); - if (IS_ERR_VALUE(res)) - pr_warning("%s: timer%i cannot set source\n", - __func__, gptimer_id); + r = clk_set_parent(timer->fclk, src); + if (IS_ERR_VALUE(r)) + pr_warn("%s: %s cannot set source\n", + __func__, oh->name); clk_put(src); } } + + omap_hwmod_setup_one(oh_name); + omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); - __omap_dm_timer_reset(timer, 1, 1); - timer->posted = 1; - timer->rate = clk_get_rate(timer->fclk); + if (posted) + __omap_dm_timer_enable_posted(timer); + + /* Check that the intended posted configuration matches the actual */ + if (posted != timer->posted) + return -EINVAL; + timer->rate = clk_get_rate(timer->fclk); timer->reserved = 1; - return res; + return r; } static void __init omap2_gp_clockevent_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + clkev.errata = omap_dm_timer_get_errata(); + + /* + * For clock-event timers we never read the timer counter and + * so we are not impacted by errata i103 and i767. Therefore, + * we can safely ignore this errata for clock-event timers. + */ + __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); + + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, + OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -250,7 +365,8 @@ static bool use_gptimer_clksrc; */ static cycle_t clocksource_read_cycles(struct clocksource *cs) { - return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); + return (cycle_t)__omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); } static struct clocksource clocksource_gpt = { @@ -264,21 +380,41 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(&clksrc, 1); + return __omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); return 0; } -#ifdef CONFIG_OMAP_32K_TIMER +static struct of_device_id omap_counter_match[] __initdata = { + { .compatible = "ti,omap-counter32k", }, + { } +}; + /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { int ret; + struct device_node *np = NULL; struct omap_hwmod *oh; void __iomem *vbase; const char *oh_name = "counter_32k"; /* + * If device-tree is present, then search the DT blob + * to see if the 32kHz counter is supported. + */ + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_counter_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + } + + /* * First check hwmod data is available for sync32k counter */ oh = omap_hwmod_lookup(oh_name); @@ -287,7 +423,13 @@ static int __init omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - vbase = omap_hwmod_get_mpu_rt_va(oh); + if (np) { + vbase = of_iomap(np, 0); + of_node_put(np); + } else { + vbase = omap_hwmod_get_mpu_rt_va(oh); + } + if (!vbase) { pr_warn("%s: failed to get counter_32k resource\n", __func__); return -ENXIO; @@ -309,23 +451,21 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } -#else -static inline int omap2_sync32k_clocksource_init(void) -{ - return -ENODEV; -} -#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) { int res; - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + clksrc.errata = omap_dm_timer_get_errata(); + + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + OMAP_TIMER_NONPOSTED); BUG_ON(res); __omap_dm_timer_load_start(&clksrc, - OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, + OMAP_TIMER_NONPOSTED); setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) @@ -336,25 +476,6 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, gptimer_id, clksrc.rate); } -static void __init omap2_clocksource_init(int gptimer_id, - const char *fck_source) -{ - /* - * First give preference to kernel parameter configuration - * by user (clocksource="gp_timer"). - * - * In case of missing kernel parameter for clocksource, - * first check for availability for 32k-sync timer, in case - * of failure in finding 32k_counter module or registering - * it as clocksource, execution will fallback to gp-timer. - */ - if (use_gptimer_clksrc == true) - omap2_gptimer_clocksource_init(gptimer_id, fck_source); - else if (omap2_sync32k_clocksource_init()) - /* Fall back to gp-timer code */ - omap2_gptimer_clocksource_init(gptimer_id, fck_source); -} - #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER /* * The realtime counter also called master counter, is a free-running @@ -433,48 +554,65 @@ static inline void __init realtime_counter_init(void) {} #endif -#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ +#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ + clksrc_nr, clksrc_src) \ +static void __init omap##name##_gptimer_timer_init(void) \ +{ \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ +} + +#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ clksrc_nr, clksrc_src) \ -static void __init omap##name##_timer_init(void) \ +static void __init omap##name##_sync32k_timer_init(void) \ { \ - omap2_gp_clockevent_init((clkev_nr), clkev_src); \ - omap2_clocksource_init((clksrc_nr), clksrc_src); \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ + /* Enable the use of clocksource="gp_timer" kernel parameter */ \ + if (use_gptimer_clksrc) \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\ + else \ + omap2_sync32k_clocksource_init(); \ } -#define OMAP_SYS_TIMER(name) \ +#define OMAP_SYS_TIMER(name, clksrc) \ struct sys_timer omap##name##_timer = { \ - .init = omap##name##_timer_init, \ + .init = omap##name##_##clksrc##_timer_init, \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) -OMAP_SYS_TIMER(2) -#endif +OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", + 2, OMAP2_MPU_SOURCE); +OMAP_SYS_TIMER(2, sync32k); +#endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) -OMAP_SYS_TIMER(3) -OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, - 2, OMAP3_MPU_SOURCE) -OMAP_SYS_TIMER(3_secure) -#endif +OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3, sync32k); +OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3_secure, sync32k); +OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3_gp, gptimer); +#endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_SOC_AM33XX -OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) -OMAP_SYS_TIMER(3_am33xx) -#endif +OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); +OMAP_SYS_TIMER(3_am33xx, gptimer); +#endif /* CONFIG_SOC_AM33XX */ #ifdef CONFIG_ARCH_OMAP4 +OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, 29); -#endif - -static void __init omap4_timer_init(void) +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); +static void __init omap4_local_timer_init(void) { - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_clocksource_init(2, OMAP4_MPU_SOURCE); -#ifdef CONFIG_LOCAL_TIMERS + omap4_sync32k_timer_init(); /* Local timers are not supprted on OMAP4430 ES1.0 */ if (omap_rev() != OMAP4430_REV_ES1_0) { int err; @@ -488,26 +626,32 @@ static void __init omap4_timer_init(void) if (err) pr_err("twd_local_timer_register failed %d\n", err); } -#endif } -OMAP_SYS_TIMER(4) -#endif +#else /* CONFIG_LOCAL_TIMERS */ +static void __init omap4_local_timer_init(void) +{ + omap4_sync32k_timer_init(); +} +#endif /* CONFIG_LOCAL_TIMERS */ +OMAP_SYS_TIMER(4, local); +#endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 -static void __init omap5_timer_init(void) +OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); +static void __init omap5_realtime_timer_init(void) { int err; - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_clocksource_init(2, OMAP4_MPU_SOURCE); + omap5_sync32k_timer_init(); realtime_counter_init(); err = arch_timer_of_register(); if (err) pr_err("%s: arch_timer_register failed %d\n", __func__, err); } -OMAP_SYS_TIMER(5) -#endif +OMAP_SYS_TIMER(5, realtime); +#endif /* CONFIG_SOC_OMAP5 */ /** * omap_timer_init - build and register timer device with an @@ -559,6 +703,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) if (timer_dev_attr) pdata->timer_capability = timer_dev_attr->timer_capability; + pdata->timer_errata = omap_dm_timer_get_errata(); + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), NULL, 0, 0); @@ -583,6 +730,10 @@ static int __init omap2_dm_timer_init(void) { int ret; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); if (unlikely(ret)) { pr_err("%s: device registration failed.\n", __func__); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index a256135d8e48..e49b40b4c90a 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -26,9 +26,6 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> -#include <plat/i2c.h> -#include <plat/usb.h> - #include "soc.h" #include "twl-common.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 3c434498e12e..d1dbe125b34f 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -25,10 +25,10 @@ #include <asm/io.h> -#include <plat/usb.h> -#include <plat/omap_device.h> - +#include "soc.h" +#include "omap_device.h" #include "mux.h" +#include "usb.h" #ifdef CONFIG_MFD_OMAP_USB_HOST diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 51da21cb78f1..7b33b375fe77 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -25,12 +25,10 @@ #include <linux/io.h> #include <linux/usb/musb.h> -#include <plat/usb.h> -#include <plat/omap_device.h> - -#include "am35xx.h" - +#include "omap_device.h" +#include "soc.h" #include "mux.h" +#include "usb.h" static struct musb_hdrc_config musb_config = { .multipoint = 1, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 805bea6edf17..a8795ff19e6d 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -15,10 +15,11 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/export.h> +#include <linux/platform_data/usb-omap.h> #include <linux/usb/musb.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h new file mode 100644 index 000000000000..9b986ead7c45 --- /dev/null +++ b/arch/arm/mach-omap2/usb.h @@ -0,0 +1,82 @@ +#include <linux/platform_data/usb-omap.h> + +/* AM35x */ +/* USB 2.0 PHY Control */ +#define CONF2_PHY_GPIOMODE (1 << 23) +#define CONF2_OTGMODE (3 << 14) +#define CONF2_NO_OVERRIDE (0 << 14) +#define CONF2_FORCE_HOST (1 << 14) +#define CONF2_FORCE_DEVICE (2 << 14) +#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) +#define CONF2_SESENDEN (1 << 13) +#define CONF2_VBDTCTEN (1 << 12) +#define CONF2_REFFREQ_24MHZ (2 << 8) +#define CONF2_REFFREQ_26MHZ (7 << 8) +#define CONF2_REFFREQ_13MHZ (6 << 8) +#define CONF2_REFFREQ (0xf << 8) +#define CONF2_PHYCLKGD (1 << 7) +#define CONF2_VBUSSENSE (1 << 6) +#define CONF2_PHY_PLLON (1 << 5) +#define CONF2_RESET (1 << 4) +#define CONF2_PHYPWRDN (1 << 3) +#define CONF2_OTGPWRDN (1 << 2) +#define CONF2_DATPOL (1 << 1) + +/* TI81XX specific definitions */ +#define USBCTRL0 0x620 +#define USBSTAT0 0x624 + +/* TI816X PHY controls bits */ +#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) +#define TI816X_USBPHY_REFCLK_OSC (1 << 8) + +/* TI814X PHY controls bits */ +#define USBPHY_CM_PWRDN (1 << 0) +#define USBPHY_OTG_PWRDN (1 << 1) +#define USBPHY_CHGDET_DIS (1 << 2) +#define USBPHY_CHGDET_RSTRT (1 << 3) +#define USBPHY_SRCONDM (1 << 4) +#define USBPHY_SINKONDP (1 << 5) +#define USBPHY_CHGISINK_EN (1 << 6) +#define USBPHY_CHGVSRC_EN (1 << 7) +#define USBPHY_DMPULLUP (1 << 8) +#define USBPHY_DPPULLUP (1 << 9) +#define USBPHY_CDET_EXTCTL (1 << 10) +#define USBPHY_GPIO_MODE (1 << 12) +#define USBPHY_DPOPBUFCTL (1 << 13) +#define USBPHY_DMOPBUFCTL (1 << 14) +#define USBPHY_DPINPUT (1 << 15) +#define USBPHY_DMINPUT (1 << 16) +#define USBPHY_DPGPIO_PD (1 << 17) +#define USBPHY_DMGPIO_PD (1 << 18) +#define USBPHY_OTGVDET_EN (1 << 19) +#define USBPHY_OTGSESSEND_EN (1 << 20) +#define USBPHY_DATA_POLARITY (1 << 23) + +struct usbhs_omap_board_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + /* have to be valid if phy_reset is true and portx is in phy mode */ + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + + /* Set this to true for ES2.x silicon */ + unsigned es2_compatibility:1; + + unsigned phy_reset:1; + + /* + * Regulators for USB PHYs. + * Each PHY can have a separate regulator. + */ + struct regulator *regulator[OMAP3_HS_USB_PORTS]; +}; + +extern void usb_musb_init(struct omap_musb_board_data *board_data); +extern void usbhs_init(const struct usbhs_omap_board_data *pdata); + +extern void am35x_musb_reset(void); +extern void am35x_musb_phy_power(u8 on); +extern void am35x_musb_clear_irq(void); +extern void am35x_set_mode(u8 musb_mode); +extern void ti81xx_musb_phy_power(u8 on); + diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index b2f1c67043a2..7c2b4ed38f02 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -1,6 +1,8 @@ /* * OMAP2+ MPU WD_TIMER-specific code * + * Copyright (C) 2012 Texas Instruments, Inc. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -11,10 +13,14 @@ #include <linux/io.h> #include <linux/err.h> -#include <plat/omap_hwmod.h> +#include <linux/platform_data/omap-wd-timer.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "wd_timer.h" #include "common.h" +#include "prm.h" +#include "soc.h" /* * In order to avoid any assumptions from bootloader regarding WDT @@ -26,9 +32,6 @@ #define OMAP_WDT_WPS 0x34 #define OMAP_WDT_SPR 0x48 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - int omap2_wd_timer_disable(struct omap_hwmod *oh) { void __iomem *base; @@ -99,3 +102,32 @@ int omap2_wd_timer_reset(struct omap_hwmod *oh) return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : omap2_wd_timer_disable(oh); } + +static int __init omap_init_wdt(void) +{ + int id = -1; + struct platform_device *pdev; + struct omap_hwmod *oh; + char *oh_name = "wd_timer2"; + char *dev_name = "omap_wdt"; + struct omap_wd_timer_platform_data pdata; + + if (!cpu_class_is_omap2() || of_have_populated_dt()) + return 0; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up wd_timer%d hwmod\n", id); + return -EINVAL; + } + + pdata.read_reset_sources = prm_read_reset_sources; + + pdev = omap_device_build(dev_name, id, oh, &pdata, + sizeof(struct omap_wd_timer_platform_data), + NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", + dev_name, oh->name); + return 0; +} +subsys_initcall(omap_init_wdt); diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h index f6bbba73b535..a78f81034a9f 100644 --- a/arch/arm/mach-omap2/wd_timer.h +++ b/arch/arm/mach-omap2/wd_timer.h @@ -10,7 +10,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H #define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" extern int omap2_wd_timer_disable(struct omap_hwmod *oh); extern int omap2_wd_timer_reset(struct omap_hwmod *oh); diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 0673f0c10432..2cb2f06c20f5 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -2,6 +2,13 @@ if ARCH_ORION5X menu "Orion Implementations" +config ARCH_ORION5X_DT + bool "Marvell Orion5x Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Orion5x using flattened device tree. + config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" select I2C_BOARDINFO @@ -96,12 +103,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2 - bool "LaCie Ethernet Disk mini V2" +config MACH_EDMINI_V2_DT + bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" select I2C_BOARDINFO + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2. + LaCie Ethernet Disk mini V2 (Flattened Device Tree). config MACH_D2NET bool "LaCie d2 Network" diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 7f18cdacd487..9e809a7c05c0 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o obj-$(CONFIG_MACH_D2NET) += d2net-setup.o obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o @@ -22,3 +21,6 @@ obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o + +obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o +obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c new file mode 100644 index 000000000000..32e5c211a89b --- /dev/null +++ b/arch/arm/mach-orion5x/board-dt.c @@ -0,0 +1,79 @@ +/* + * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * arch/arm/mach-orion5x/board-dt.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <asm/system_misc.h> +#include <asm/mach/arch.h> +#include <mach/orion5x.h> +#include <plat/irq.h> +#include "common.h" + +struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1090000, "mv_crypto", NULL), + {}, +}; + +static void __init orion5x_dt_init(void) +{ + char *dev_name; + u32 dev, rev; + + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + + /* + * Setup Orion address map + */ + orion5x_setup_cpu_mbus_bridge(); + + /* Setup root of clk tree */ + clk_init(); + + /* + * Don't issue "Wait for Interrupt" instruction if we are + * running on D0 5281 silicon. + */ + if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { + printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); + disable_hlt(); + } + + if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) + edmini_v2_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + orion5x_auxdata_lookup, NULL); +} + +static const char *orion5x_dt_compat[] = { + "marvell,orion5x", + NULL, +}; + +DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") + /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ + .map_io = orion5x_map_io, + .init_early = orion5x_init_early, + .init_irq = orion_dt_init_irq, + .timer = &orion5x_timer, + .init_machine = orion5x_dt_init, + .restart = orion5x_restart, + .dt_compat = orion5x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b3eb3da01160..550f92320afb 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -65,7 +65,7 @@ void __init orion5x_map_io(void) ****************************************************************************/ static struct clk *tclk; -static void __init clk_init(void) +void __init clk_init(void) { tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, orion5x_tclk); @@ -236,7 +236,7 @@ struct sys_timer orion5x_timer = { /* * Identify device ID and rev from PCIe configuration header space '0'. */ -static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) +void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) { orion5x_pcie_id(dev, rev); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 31bab92ce038..7db5cdd9c4b7 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -12,6 +12,8 @@ void orion5x_map_io(void); void orion5x_init_early(void); void orion5x_init_irq(void); void orion5x_init(void); +void orion5x_id(u32 *dev, u32 *rev, char **dev_name); +void clk_init(void); extern int orion5x_tclk; extern struct sys_timer orion5x_timer; @@ -54,6 +56,13 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +/* board init functions for boards not fully converted to fdt */ +#ifdef CONFIG_MACH_EDMINI_V2_DT +void edmini_v2_init(void); +#else +static inline void edmini_v2_init(void) {}; +#endif + struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 355e962137c7..d675e727803d 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -115,69 +115,6 @@ static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { }; /***************************************************************************** - * Sata - ****************************************************************************/ - -static struct mv_sata_platform_data edmini_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO LED (simple - doesn't use hardware blinking support) - ****************************************************************************/ - -#define EDMINI_V2_GPIO_LED_POWER 16 - -static struct gpio_led edmini_v2_leds[] = { - { - .name = "power:blue", - .gpio = EDMINI_V2_GPIO_LED_POWER, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data edmini_v2_led_data = { - .num_leds = ARRAY_SIZE(edmini_v2_leds), - .leds = edmini_v2_leds, -}; - -static struct platform_device edmini_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &edmini_v2_led_data, - }, -}; - -/**************************************************************************** - * GPIO key - ****************************************************************************/ - -#define EDMINI_V2_GPIO_KEY_POWER 18 - -static struct gpio_keys_button edmini_v2_buttons[] = { - { - .code = KEY_POWER, - .gpio = EDMINI_V2_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data edmini_v2_button_data = { - .buttons = edmini_v2_buttons, - .nbuttons = ARRAY_SIZE(edmini_v2_buttons), -}; - -static struct platform_device edmini_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &edmini_v2_button_data, - }, -}; - -/***************************************************************************** * General Setup ****************************************************************************/ static unsigned int edminiv2_mpp_modes[] __initdata = { @@ -207,13 +144,8 @@ static unsigned int edminiv2_mpp_modes[] __initdata = { 0, }; -static void __init edmini_v2_init(void) +void __init edmini_v2_init(void) { - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - orion5x_mpp_conf(edminiv2_mpp_modes); /* @@ -221,15 +153,10 @@ static void __init edmini_v2_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&edmini_v2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&edmini_v2_sata_data); - orion5x_uart0_init(); orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE, EDMINI_V2_NOR_BOOT_SIZE); platform_device_register(&edmini_v2_nor_flash); - platform_device_register(&edmini_v2_gpio_leds); - platform_device_register(&edmini_v2_gpio_buttons); pr_notice("edmini_v2: USB device port, flash write and power-off " "are not yet supported.\n"); @@ -247,16 +174,3 @@ static void __init edmini_v2_init(void) i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); } - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ -MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") - /* Maintainer: Christopher Moore <moore@free.fr> */ - .atag_offset = 0x100, - .init_machine = edmini_v2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 11aa7399dc09..86eec4159cbc 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,27 +2,6 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" -config ARCH_PXA_V7 - bool "ARMv7 (PXA95x) based systems" - -if ARCH_PXA_V7 -comment "Marvell Dev Platforms (sorted by hardware release time)" -config MACH_TAVOREVB3 - bool "PXA95x Development Platform (aka TavorEVB III)" - select CPU_PXA955 - -config MACH_SAARB - bool "PXA955 Handheld Platform (aka SAARB)" - select CPU_PXA955 -endif - -config PXA_V7_MACH_AUTO - def_bool y - depends on ARCH_PXA_V7 - depends on !MACH_SAARB - select MACH_TAVOREVB3 - -if !ARCH_PXA_V7 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config MACH_PXA3XX_DT @@ -630,7 +609,6 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select HAVE_PWM select PXA27x -endif endmenu config PXA25x @@ -688,18 +666,6 @@ config CPU_PXA935 help PXA935 (codename Tavor-P65) -config PXA95x - bool - select CPU_PJ4 - help - Select code specific to PXA95x variants - -config CPU_PXA955 - bool - select PXA95x - help - PXA950 (codename MG1) - config PXA_SHARP_C7xx bool select SHARPSL_PM diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index ee88d6eae648..12c500558387 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -19,7 +19,6 @@ endif obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o -obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o @@ -36,9 +35,7 @@ obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o -obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o obj-$(CONFIG_MACH_SAAR) += saar.o -obj-$(CONFIG_MACH_SAARB) += saarb.o # 3rd Party Dev Platforms obj-$(CONFIG_ARCH_PXA_IDP) += idp.o diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 3a258b1bf1aa..1f65d32c8d5e 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -57,7 +57,7 @@ void clk_pxa2xx_cken_disable(struct clk *clk); extern struct syscore_ops pxa2xx_clock_syscore_ops; -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA3xx) #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \ struct clk clk_##_name = { \ .ops = &clk_pxa3xx_cken_ops, \ diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index ddaa04de8e22..daa86d39ed9e 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -703,7 +703,7 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) } #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) static struct resource pxa27x_resource_keypad[] = { [0] = { .start = 0x41500000, @@ -872,7 +872,7 @@ struct platform_device pxa27x_device_pwm1 = { .resource = pxa27x_resource_pwm1, .num_resources = ARRAY_SIZE(pxa27x_resource_pwm1), }; -#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/ +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ #ifdef CONFIG_PXA3xx static struct resource pxa3xx_resources_mci2[] = { @@ -981,7 +981,7 @@ struct platform_device pxa3xx_device_gcu = { #endif /* CONFIG_PXA3xx */ -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA3xx) static struct resource pxa3xx_resources_i2c_power[] = { { .start = 0x40f500c0, @@ -1082,7 +1082,7 @@ struct platform_device pxa3xx_device_ssp4 = { .resource = pxa3xx_resource_ssp4, .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4), }; -#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */ +#endif /* CONFIG_PXA3xx */ struct resource pxa_resource_gpio[] = { { diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 56d92e5cad85..ccb06e485520 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -194,17 +194,6 @@ #define __cpu_is_pxa935(id) (0) #endif -#ifdef CONFIG_CPU_PXA955 -#define __cpu_is_pxa955(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x581 || _id == 0xc08 \ - || _id == 0xb76; \ - }) -#else -#define __cpu_is_pxa955(id) (0) -#endif - #define cpu_is_pxa210() \ ({ \ __cpu_is_pxa210(read_cpuid_id()); \ @@ -255,10 +244,6 @@ __cpu_is_pxa935(read_cpuid_id()); \ }) -#define cpu_is_pxa955() \ - ({ \ - __cpu_is_pxa955(read_cpuid_id()); \ - }) /* @@ -297,15 +282,6 @@ #define __cpu_is_pxa93x(id) (0) #endif -#ifdef CONFIG_PXA95x -#define __cpu_is_pxa95x(id) \ - ({ \ - __cpu_is_pxa955(id); \ - }) -#else -#define __cpu_is_pxa95x(id) (0) -#endif - #define cpu_is_pxa2xx() \ ({ \ __cpu_is_pxa2xx(read_cpuid_id()); \ @@ -321,10 +297,6 @@ __cpu_is_pxa93x(read_cpuid_id()); \ }) -#define cpu_is_pxa95x() \ - ({ \ - __cpu_is_pxa95x(read_cpuid_id()); \ - }) /* * return current memory and LCD clock frequency in units of 10kHz diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 8765782dd955..48c2fd851686 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -84,7 +84,6 @@ #define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */ #define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */ #define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */ -#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */ #define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */ #define PXA_GPIO_IRQ_BASE PXA_IRQ(96) diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h index cd3e57f42688..6dd7fa163e29 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h @@ -7,7 +7,6 @@ extern void __init pxa3xx_map_io(void); extern void __init pxa3xx_init_irq(void); -extern void __init pxa95x_init_irq(void); #define pxa3xx_handle_irq ichp_handle_irq diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h deleted file mode 100644 index cbb097c4cb1f..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa95x.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_PXA95X_H -#define __MACH_PXA95X_H - -#include <mach/pxa3xx.h> -#include <mach/mfp-pxa930.h> - -#endif /* __MACH_PXA95X_H */ diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h index 2f82332e81a0..9a827e32db98 100644 --- a/arch/arm/mach-pxa/include/mach/udc.h +++ b/arch/arm/mach-pxa/include/mach/udc.h @@ -2,7 +2,7 @@ * arch/arm/mach-pxa/include/mach/udc.h * */ -#include <asm/mach/udc_pxa2xx.h> +#include <linux/platform_data/pxa2xx_udc.h> extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 3352b37b60cf..3f5171eaf67b 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -209,6 +209,7 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -338,6 +339,10 @@ void __init pxa25x_map_io(void) pxa25x_get_clk_frequency_khz(1); } +static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { + .gpio_set_wake = gpio_set_wake, +}; + static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_udc, &pxa_device_pmu, @@ -370,6 +375,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); + pxa_register_device(&pxa_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); if (ret) diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index 7dbe3ccf1993..e329ccefd364 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -384,18 +384,7 @@ static struct platform_driver pxa3xx_u2d_ulpi_driver = { .probe = pxa3xx_u2d_probe, .remove = pxa3xx_u2d_remove, }; - -static int pxa3xx_u2d_ulpi_init(void) -{ - return platform_driver_register(&pxa3xx_u2d_ulpi_driver); -} -module_init(pxa3xx_u2d_ulpi_init); - -static void __exit pxa3xx_u2d_ulpi_exit(void) -{ - platform_driver_unregister(&pxa3xx_u2d_ulpi_driver); -} -module_exit(pxa3xx_u2d_ulpi_exit); +module_platform_driver(pxa3xx_u2d_ulpi_driver); MODULE_DESCRIPTION("PXA3xx U2D ULPI driver"); MODULE_AUTHOR("Igor Grinberg"); diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c deleted file mode 100644 index 47601f80e6e7..000000000000 --- a/arch/arm/mach-pxa/pxa95x.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/pxa95x.c - * - * code specific to PXA95x aka MGx - * - * Copyright (C) 2009-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pm.h> -#include <linux/platform_device.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/pxa930.h> -#include <mach/reset.h> -#include <mach/pm.h> -#include <mach/dma.h> - -#include "generic.h" -#include "devices.h" -#include "clock.h" - -static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = { - - MFP_ADDR(GPIO0, 0x02e0), - MFP_ADDR(GPIO1, 0x02dc), - MFP_ADDR(GPIO2, 0x02e8), - MFP_ADDR(GPIO3, 0x02d8), - MFP_ADDR(GPIO4, 0x02e4), - MFP_ADDR(GPIO5, 0x02ec), - MFP_ADDR(GPIO6, 0x02f8), - MFP_ADDR(GPIO7, 0x02fc), - MFP_ADDR(GPIO8, 0x0300), - MFP_ADDR(GPIO9, 0x02d4), - MFP_ADDR(GPIO10, 0x02f4), - MFP_ADDR(GPIO11, 0x02f0), - MFP_ADDR(GPIO12, 0x0304), - MFP_ADDR(GPIO13, 0x0310), - MFP_ADDR(GPIO14, 0x0308), - MFP_ADDR(GPIO15, 0x030c), - MFP_ADDR(GPIO16, 0x04e8), - MFP_ADDR(GPIO17, 0x04f4), - MFP_ADDR(GPIO18, 0x04f8), - MFP_ADDR(GPIO19, 0x04fc), - MFP_ADDR(GPIO20, 0x0518), - MFP_ADDR(GPIO21, 0x051c), - MFP_ADDR(GPIO22, 0x04ec), - MFP_ADDR(GPIO23, 0x0500), - MFP_ADDR(GPIO24, 0x04f0), - MFP_ADDR(GPIO25, 0x0504), - MFP_ADDR(GPIO26, 0x0510), - MFP_ADDR(GPIO27, 0x0514), - MFP_ADDR(GPIO28, 0x0520), - MFP_ADDR(GPIO29, 0x0600), - MFP_ADDR(GPIO30, 0x0618), - MFP_ADDR(GPIO31, 0x0610), - MFP_ADDR(GPIO32, 0x060c), - MFP_ADDR(GPIO33, 0x061c), - MFP_ADDR(GPIO34, 0x0620), - MFP_ADDR(GPIO35, 0x0628), - MFP_ADDR(GPIO36, 0x062c), - MFP_ADDR(GPIO37, 0x0630), - MFP_ADDR(GPIO38, 0x0634), - MFP_ADDR(GPIO39, 0x0638), - MFP_ADDR(GPIO40, 0x063c), - MFP_ADDR(GPIO41, 0x0614), - MFP_ADDR(GPIO42, 0x0624), - MFP_ADDR(GPIO43, 0x0608), - MFP_ADDR(GPIO44, 0x0604), - MFP_ADDR(GPIO45, 0x050c), - MFP_ADDR(GPIO46, 0x0508), - MFP_ADDR(GPIO47, 0x02bc), - MFP_ADDR(GPIO48, 0x02b4), - MFP_ADDR(GPIO49, 0x02b8), - MFP_ADDR(GPIO50, 0x02c8), - MFP_ADDR(GPIO51, 0x02c0), - MFP_ADDR(GPIO52, 0x02c4), - MFP_ADDR(GPIO53, 0x02d0), - MFP_ADDR(GPIO54, 0x02cc), - MFP_ADDR(GPIO55, 0x029c), - MFP_ADDR(GPIO56, 0x02a0), - MFP_ADDR(GPIO57, 0x0294), - MFP_ADDR(GPIO58, 0x0298), - MFP_ADDR(GPIO59, 0x02a4), - MFP_ADDR(GPIO60, 0x02a8), - MFP_ADDR(GPIO61, 0x02b0), - MFP_ADDR(GPIO62, 0x02ac), - MFP_ADDR(GPIO63, 0x0640), - MFP_ADDR(GPIO64, 0x065c), - MFP_ADDR(GPIO65, 0x0648), - MFP_ADDR(GPIO66, 0x0644), - MFP_ADDR(GPIO67, 0x0674), - MFP_ADDR(GPIO68, 0x0658), - MFP_ADDR(GPIO69, 0x0654), - MFP_ADDR(GPIO70, 0x0660), - MFP_ADDR(GPIO71, 0x0668), - MFP_ADDR(GPIO72, 0x0664), - MFP_ADDR(GPIO73, 0x0650), - MFP_ADDR(GPIO74, 0x066c), - MFP_ADDR(GPIO75, 0x064c), - MFP_ADDR(GPIO76, 0x0670), - MFP_ADDR(GPIO77, 0x0678), - MFP_ADDR(GPIO78, 0x067c), - MFP_ADDR(GPIO79, 0x0694), - MFP_ADDR(GPIO80, 0x069c), - MFP_ADDR(GPIO81, 0x06a0), - MFP_ADDR(GPIO82, 0x06a4), - MFP_ADDR(GPIO83, 0x0698), - MFP_ADDR(GPIO84, 0x06bc), - MFP_ADDR(GPIO85, 0x06b4), - MFP_ADDR(GPIO86, 0x06b0), - MFP_ADDR(GPIO87, 0x06c0), - MFP_ADDR(GPIO88, 0x06c4), - MFP_ADDR(GPIO89, 0x06ac), - MFP_ADDR(GPIO90, 0x0680), - MFP_ADDR(GPIO91, 0x0684), - MFP_ADDR(GPIO92, 0x0688), - MFP_ADDR(GPIO93, 0x0690), - MFP_ADDR(GPIO94, 0x068c), - MFP_ADDR(GPIO95, 0x06a8), - MFP_ADDR(GPIO96, 0x06b8), - MFP_ADDR(GPIO97, 0x0410), - MFP_ADDR(GPIO98, 0x0418), - MFP_ADDR(GPIO99, 0x041c), - MFP_ADDR(GPIO100, 0x0414), - MFP_ADDR(GPIO101, 0x0408), - MFP_ADDR(GPIO102, 0x0324), - MFP_ADDR(GPIO103, 0x040c), - MFP_ADDR(GPIO104, 0x0400), - MFP_ADDR(GPIO105, 0x0328), - MFP_ADDR(GPIO106, 0x0404), - - MFP_ADDR(GPIO159, 0x0524), - MFP_ADDR(GPIO163, 0x0534), - MFP_ADDR(GPIO167, 0x0544), - MFP_ADDR(GPIO168, 0x0548), - MFP_ADDR(GPIO169, 0x054c), - MFP_ADDR(GPIO170, 0x0550), - MFP_ADDR(GPIO171, 0x0554), - MFP_ADDR(GPIO172, 0x0558), - MFP_ADDR(GPIO173, 0x055c), - - MFP_ADDR(nXCVREN, 0x0204), - MFP_ADDR(DF_CLE_nOE, 0x020c), - MFP_ADDR(DF_nADV1_ALE, 0x0218), - MFP_ADDR(DF_SCLK_E, 0x0214), - MFP_ADDR(DF_SCLK_S, 0x0210), - MFP_ADDR(nBE0, 0x021c), - MFP_ADDR(nBE1, 0x0220), - MFP_ADDR(DF_nADV2_ALE, 0x0224), - MFP_ADDR(DF_INT_RnB, 0x0228), - MFP_ADDR(DF_nCS0, 0x022c), - MFP_ADDR(DF_nCS1, 0x0230), - MFP_ADDR(nLUA, 0x0254), - MFP_ADDR(nLLA, 0x0258), - MFP_ADDR(DF_nWE, 0x0234), - MFP_ADDR(DF_nRE_nOE, 0x0238), - MFP_ADDR(DF_ADDR0, 0x024c), - MFP_ADDR(DF_ADDR1, 0x0250), - MFP_ADDR(DF_ADDR2, 0x025c), - MFP_ADDR(DF_ADDR3, 0x0260), - MFP_ADDR(DF_IO0, 0x023c), - MFP_ADDR(DF_IO1, 0x0240), - MFP_ADDR(DF_IO2, 0x0244), - MFP_ADDR(DF_IO3, 0x0248), - MFP_ADDR(DF_IO4, 0x0264), - MFP_ADDR(DF_IO5, 0x0268), - MFP_ADDR(DF_IO6, 0x026c), - MFP_ADDR(DF_IO7, 0x0270), - MFP_ADDR(DF_IO8, 0x0274), - MFP_ADDR(DF_IO9, 0x0278), - MFP_ADDR(DF_IO10, 0x027c), - MFP_ADDR(DF_IO11, 0x0280), - MFP_ADDR(DF_IO12, 0x0284), - MFP_ADDR(DF_IO13, 0x0288), - MFP_ADDR(DF_IO14, 0x028c), - MFP_ADDR(DF_IO15, 0x0290), - - MFP_ADDR(GSIM_UIO, 0x0314), - MFP_ADDR(GSIM_UCLK, 0x0318), - MFP_ADDR(GSIM_UDET, 0x031c), - MFP_ADDR(GSIM_nURST, 0x0320), - - MFP_ADDR(PMIC_INT, 0x06c8), - - MFP_ADDR(RDY, 0x0200), - - MFP_ADDR_END, -}; - -static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops); -static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70); -static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0); -static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0); - -static struct clk_lookup pxa95x_clkregs[] = { - INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), - /* Power I2C clock is always on */ - INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), - INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"), - INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL), - INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL), - INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL), - INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL), - INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL), - INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL), - INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - -void __init pxa95x_init_irq(void) -{ - pxa_init_irq(96, NULL); -} - -/* - * device registration specific to PXA93x. - */ - -void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info) -{ - pxa_register_device(&pxa3xx_device_i2c_power, info); -} - -static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, - &sa1100_device_rtc, - &pxa_device_rtc, - &pxa27x_device_ssp1, - &pxa27x_device_ssp2, - &pxa27x_device_ssp3, - &pxa3xx_device_ssp4, - &pxa27x_device_pwm0, - &pxa27x_device_pwm1, -}; - -static int __init pxa95x_init(void) -{ - int ret = 0, i; - - if (cpu_is_pxa95x()) { - mfp_init_base(io_p2v(MFPR_BASE)); - mfp_init_addr(pxa95x_mfp_addr_map); - - reset_status = ARSR; - - /* - * clear RDH bit every time after reset - * - * Note: the last 3 bits DxS are write-1-to-clear so carefully - * preserve them here in case they will be referenced later - */ - ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - - clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs)); - - if ((ret = pxa_init_dma(IRQ_DMA, 32))) - return ret; - - register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa3xx_clock_syscore_ops); - - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); - } - - return ret; -} - -postcore_initcall(pxa95x_init); diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c deleted file mode 100644 index 5aded5e6148f..000000000000 --- a/arch/arm/mach-pxa/saarb.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/saarb.c - * - * Support for the Marvell Handheld Platform (aka SAARB) - * - * Copyright (C) 2007-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/mfd/88pm860x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/mfp.h> -#include <mach/mfp-pxa930.h> -#include <mach/pxa95x.h> - -#include "generic.h" - -#define SAARB_NR_IRQS (IRQ_BOARD_START + 40) - -static struct pm860x_touch_pdata saarb_touch = { - .gpadc_prebias = 1, - .slot_cycle = 1, - .tsi_prebias = 6, - .pen_prebias = 16, - .pen_prechg = 2, - .res_x = 300, -}; - -static struct pm860x_backlight_pdata saarb_backlight[] = { - { - .id = PM8606_ID_BACKLIGHT, - .iset = PM8606_WLED_CURRENT(24), - .flags = PM8606_BACKLIGHT1, - }, - {}, -}; - -static struct pm860x_led_pdata saarb_led[] = { - { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_BLUE, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_BLUE, - }, -}; - -static struct pm860x_platform_data saarb_pm8607_info = { - .touch = &saarb_touch, - .backlight = &saarb_backlight[0], - .led = &saarb_led[0], - .companion_addr = 0x10, - .irq_mode = 0, - .irq_base = IRQ_BOARD_START, - - .i2c_port = GI2C_PORT, -}; - -static struct i2c_board_info saarb_i2c_info[] = { - { - .type = "88PM860x", - .addr = 0x34, - .platform_data = &saarb_pm8607_info, - .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), - }, -}; - -static void __init saarb_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_i2c_info(NULL); - i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info)); -} - -MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") - .atag_offset = 0x100, - .map_io = pxa3xx_map_io, - .nr_irqs = SAARB_NR_IRQS, - .init_irq = pxa95x_init_irq, - .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, - .init_machine = saarb_init, - .restart = pxa_restart, -MACHINE_END - diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c deleted file mode 100644 index f7d9305cfd77..000000000000 --- a/arch/arm/mach-pxa/tavorevb3.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/tavorevb3.c - * - * Support for the Marvell EVB3 Development Platform. - * - * Copyright: (C) Copyright 2008-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> -#include <linux/mfd/88pm860x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/pxa930.h> - -#include "devices.h" -#include "generic.h" - -#define TAVOREVB3_NR_IRQS (IRQ_BOARD_START + 24) - -static mfp_cfg_t evb3_mfp_cfg[] __initdata = { - /* UART */ - GPIO53_UART1_TXD, - GPIO54_UART1_RXD, - - /* PMIC */ - PMIC_INT_GPIO83, -}; - -#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) -static struct pm860x_touch_pdata evb3_touch = { - .gpadc_prebias = 1, - .slot_cycle = 1, - .tsi_prebias = 6, - .pen_prebias = 16, - .pen_prechg = 2, - .res_x = 300, -}; - -static struct pm860x_backlight_pdata evb3_backlight[] = { - { - .id = PM8606_ID_BACKLIGHT, - .iset = PM8606_WLED_CURRENT(24), - .flags = PM8606_BACKLIGHT1, - }, - {}, -}; - -static struct pm860x_led_pdata evb3_led[] = { - { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_BLUE, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_BLUE, - }, -}; - -static struct pm860x_platform_data evb3_pm8607_info = { - .touch = &evb3_touch, - .backlight = &evb3_backlight[0], - .led = &evb3_led[0], - .companion_addr = 0x10, - .irq_mode = 0, - .irq_base = IRQ_BOARD_START, - - .i2c_port = GI2C_PORT, -}; - -static struct i2c_board_info evb3_i2c_info[] = { - { - .type = "88PM860x", - .addr = 0x34, - .platform_data = &evb3_pm8607_info, - .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), - }, -}; - -static void __init evb3_init_i2c(void) -{ - pxa_set_i2c_info(NULL); - i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info)); -} -#else -static inline void evb3_init_i2c(void) {} -#endif - -static void __init evb3_init(void) -{ - /* initialize MFP configurations */ - pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg)); - - pxa_set_ffuart_info(NULL); - - evb3_init_i2c(); -} - -MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") - .atag_offset = 0x100, - .map_io = pxa3xx_map_io, - .nr_irqs = TAVOREVB3_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, - .init_machine = evb3_init, - .restart = pxa_restart, -MACHINE_END diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index d3b3cd216d64..28511d43637a 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -467,6 +467,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, + .smp = smp_ops(realview_smp_ops), .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 2b6cb5f29c2d..25df14a9e268 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -400,11 +400,12 @@ config MACH_MINI2440 bool "MINI2440 development board" select EEPROM_AT24 select LEDS_CLASS - select LEDS_TRIGGER + select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT select NEW_LEDS select S3C_DEV_NAND select S3C_DEV_USB_HOST + select S3C_SETUP_CAMIF help Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 4407b1730539..04b87ec92537 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -161,6 +161,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), + CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), }; static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index 7f689ce1be61..bdaba59b42dc 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -158,12 +158,6 @@ static struct clk init_clocks_off[] = { .devname = "s3c2410-spi.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI0, - }, { - .name = "spi", - .devname = "s3c2410-spi.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SPI1, } }; diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 63e7ae3ee9e6..131c86284711 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -294,6 +294,7 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_SPI select S3C64XX_SETUP_USB_PHY + select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -304,6 +305,7 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_WDT select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select SAMSUNG_GPIO_EXTRA128 help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 28041e83dc82..1a6f85777449 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,11 +138,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", -#ifdef CONFIG_S3C_DEV_I2C1 .devname = "s3c2440-i2c.0", -#else - .devname = "s3c2440-i2c", -#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, @@ -319,10 +315,6 @@ static struct clk init_clocks_off[] = { .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MFC, }, { - .name = "cam", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_CAM, - }, { .name = "sclk_jpeg", .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_JPEG, @@ -681,15 +673,6 @@ static struct clksrc_sources clkset_audio2 = { .nr_sources = ARRAY_SIZE(clkset_audio2_list), }; -static struct clk *clkset_camif_list[] = { - &clk_h2, -}; - -static struct clksrc_sources clkset_camif = { - .sources = clkset_camif_list, - .nr_sources = ARRAY_SIZE(clkset_camif_list), -}; - static struct clksrc_clk clksrcs[] = { { .clk = { @@ -744,10 +727,9 @@ static struct clksrc_clk clksrcs[] = { .name = "camera", .ctrlbit = S3C_CLKCON_SCLK_CAM, .enable = s3c64xx_sclk_ctrl, + .parent = &clk_h2, }, .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, - .reg_src = { .reg = NULL, .shift = 0, .size = 0 }, - .sources = &clkset_camif, }, }; diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index be746e33e86c..aef303b8997e 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -155,7 +155,6 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); - init_consistent_dma_size(SZ_8M); /* detect cpu id */ s3c64xx_init_cpu(); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 4e3fe57674c8..c6d8dba90623 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -20,6 +20,8 @@ #include <linux/regulator/machine.h> +#include <sound/wm0010.h> +#include <sound/wm2200.h> #include <sound/wm5100.h> #include <sound/wm8996.h> #include <sound/wm8962.h> @@ -33,14 +35,34 @@ static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { .line = S3C64XX_GPC(3), }; +static struct wm0010_pdata wm0010_pdata = { + .gpio_reset = S3C64XX_GPN(6), + .reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */ +}; + static struct spi_board_info wm1253_devs[] = { [0] = { .modalias = "wm0010", + .max_speed_hz = 26 * 1000 * 1000, .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, .irq = S3C_EINT(5), .controller_data = &wm0010_spi_csinfo, + .platform_data = &wm0010_pdata, + }, +}; + +static struct spi_board_info balblair_devs[] = { + [0] = { + .modalias = "wm0010", + .max_speed_hz = 26 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .irq = S3C_EINT(4), + .controller_data = &wm0010_spi_csinfo, + .platform_data = &wm0010_pdata, }, }; @@ -166,12 +188,13 @@ static struct regulator_init_data wm8994_ldo2 = { static struct wm8994_pdata wm8994_pdata = { .gpio_base = CODEC_GPIO_BASE, + .micb2_delay = 150, .gpio_defaults = { 0x3, /* IRQ out, active high, CMOS */ }, .ldo = { - { .init_data = &wm8994_ldo1, }, - { .init_data = &wm8994_ldo2, }, + { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, }, + { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, }, }, }; @@ -182,7 +205,7 @@ static const struct i2c_board_info wm1277_devs[] = { }, }; -static struct arizona_pdata wm5102_pdata = { +static struct arizona_pdata wm5102_reva_pdata = { .ldoena = S3C64XX_GPN(7), .gpio_base = CODEC_GPIO_BASE, .irq_active_high = true, @@ -193,64 +216,131 @@ static struct arizona_pdata wm5102_pdata = { }, }; -static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = { +static struct s3c64xx_spi_csinfo codec_spi_csinfo = { .line = S3C64XX_GPN(5), }; +static struct spi_board_info wm5102_reva_spi_devs[] = { + [0] = { + .modalias = "wm5102", + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + + WM831X_IRQ_GPIO_2, + .controller_data = &codec_spi_csinfo, + .platform_data = &wm5102_reva_pdata, + }, +}; + +static struct arizona_pdata wm5102_pdata = { + .ldoena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .irq_active_high = true, + .micd_pol_gpio = CODEC_GPIO_BASE + 2, + .gpio_defaults = { + [2] = 0x10000, /* AIF3TXLRCLK */ + [3] = 0x4, /* OPCLK */ + }, +}; + static struct spi_board_info wm5102_spi_devs[] = { [0] = { .modalias = "wm5102", .max_speed_hz = 10 * 1000 * 1000, .bus_num = 0, - .chip_select = 0, + .chip_select = 1, .mode = SPI_MODE_0, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - .controller_data = &wm5102_spi_csinfo, + .controller_data = &codec_spi_csinfo, .platform_data = &wm5102_pdata, }, }; +static struct spi_board_info wm5110_spi_devs[] = { + [0] = { + .modalias = "wm5110", + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + + WM831X_IRQ_GPIO_2, + .controller_data = &codec_spi_csinfo, + .platform_data = &wm5102_reva_pdata, + }, +}; + static const struct i2c_board_info wm6230_i2c_devs[] = { { I2C_BOARD_INFO("wm9081", 0x6c), .platform_data = &wm9081_pdata, }, }; +static struct wm2200_pdata wm2200_pdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_defaults = { + [2] = 0x0005, /* GPIO3 24.576MHz output clock */ + }, +}; + +static const struct i2c_board_info wm2200_i2c[] = { + { I2C_BOARD_INFO("wm2200", 0x3a), + .platform_data = &wm2200_pdata, }, +}; + static __devinitdata const struct { u8 id; + u8 rev; const char *name; const struct i2c_board_info *i2c_devs; int num_i2c_devs; const struct spi_board_info *spi_devs; int num_spi_devs; } gf_mods[] = { - { .id = 0x01, .name = "1250-EV1 Springbank" }, - { .id = 0x02, .name = "1251-EV1 Jura" }, - { .id = 0x03, .name = "1252-EV1 Glenlivet" }, - { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, - { .id = 0x14, .name = "6271-EV1 Lochnagar" }, - { .id = 0x15, .name = "6320-EV1 Bells", + { .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" }, + { .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" }, + { .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" }, + { .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" }, + { .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston", + .spi_devs = wm5110_spi_devs, + .num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) }, + { .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" }, + { .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" }, + { .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" }, + { .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" }, + { .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" }, + { .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells", .i2c_devs = wm6230_i2c_devs, .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) }, - { .id = 0x21, .name = "1275-EV1 Mortlach" }, - { .id = 0x25, .name = "1274-EV1 Glencadam" }, - { .id = 0x31, .name = "1253-EV1 Tomatin", + { .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" }, + { .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" }, + { .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin", .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) }, - { .id = 0x32, .name = "XXXX-EV1 Caol Illa" }, - { .id = 0x33, .name = "XXXX-EV1 Oban" }, - { .id = 0x34, .name = "WM0010-6320-CS42 Balblair" }, - { .id = 0x39, .name = "1254-EV1 Dallas Dhu", + { .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" }, + { .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" }, + { .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair", + .spi_devs = balblair_devs, + .num_spi_devs = ARRAY_SIZE(balblair_devs) }, + { .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu", .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, - { .id = 0x3a, .name = "1259-EV1 Tobermory", + { .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory", .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) }, - { .id = 0x3b, .name = "1255-EV1 Kilchoman", + { .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman", .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, - { .id = 0x3c, .name = "1273-EV1 Longmorn" }, - { .id = 0x3d, .name = "1277-EV1 Littlemill", + { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" }, + { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill", .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, - { .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut", + { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut", + .spi_devs = wm5102_reva_spi_devs, + .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs) }, + { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut", .spi_devs = wm5102_spi_devs, .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) }, + { .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1", + .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, @@ -267,7 +357,8 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, id = (ret & 0xfe) >> 2; rev = ret & 0x3; for (i = 0; i < ARRAY_SIZE(gf_mods); i++) - if (id == gf_mods[i].id) + if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff || + rev == gf_mods[i].rev)) break; if (i < ARRAY_SIZE(gf_mods)) { diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 13b7eaa45fd0..701f421de1a8 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -287,16 +287,21 @@ static struct platform_device littlemill_device = { .id = -1, }; -static struct platform_device bells_wm5102_device = { +static struct platform_device bells_wm2200_device = { .name = "bells", .id = 0, }; -static struct platform_device bells_wm5110_device = { +static struct platform_device bells_wm5102_device = { .name = "bells", .id = 1, }; +static struct platform_device bells_wm5110_device = { + .name = "bells", + .id = 2, +}; + static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD", "1-001a"), REGULATOR_SUPPLY("SPKVDD1", "1-001a"), @@ -304,6 +309,13 @@ static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDDL", "1-001a"), REGULATOR_SUPPLY("SPKVDDR", "1-001a"), + REGULATOR_SUPPLY("SPKVDDL", "spi0.1"), + REGULATOR_SUPPLY("SPKVDDR", "spi0.1"), + REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"), + REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"), + REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"), + REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"), + REGULATOR_SUPPLY("DC1VDD", "0-0034"), REGULATOR_SUPPLY("DC2VDD", "0-0034"), REGULATOR_SUPPLY("DC3VDD", "0-0034"), @@ -321,6 +333,16 @@ static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("DC1VDD", "1-0034"), REGULATOR_SUPPLY("DC2VDD", "1-0034"), REGULATOR_SUPPLY("DC3VDD", "1-0034"), + REGULATOR_SUPPLY("LDO1VDD", "1-0034"), + REGULATOR_SUPPLY("LDO2VDD", "1-0034"), + REGULATOR_SUPPLY("LDO4VDD", "1-0034"), + REGULATOR_SUPPLY("LDO5VDD", "1-0034"), + REGULATOR_SUPPLY("LDO6VDD", "1-0034"), + REGULATOR_SUPPLY("LDO7VDD", "1-0034"), + REGULATOR_SUPPLY("LDO8VDD", "1-0034"), + REGULATOR_SUPPLY("LDO9VDD", "1-0034"), + REGULATOR_SUPPLY("LDO10VDD", "1-0034"), + REGULATOR_SUPPLY("LDO11VDD", "1-0034"), }; static struct regulator_init_data wallvdd_data = { @@ -369,6 +391,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &tobermory_device, &littlemill_device, &lowland_device, + &bells_wm2200_device, &bells_wm5102_device, &bells_wm5110_device, &wallvdd_device, @@ -597,6 +620,7 @@ static struct s3c2410_platform_i2c i2c0_pdata = { static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = { REGULATOR_SUPPLY("DCVDD", "spi0.0"), REGULATOR_SUPPLY("AVDD", "spi0.0"), + REGULATOR_SUPPLY("AVDD", "spi0.1"), }; static struct regulator_init_data pvdd_1v2 __devinitdata = { @@ -621,6 +645,24 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = { REGULATOR_SUPPLY("DCVDD", "1-001a"), REGULATOR_SUPPLY("AVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD", "spi0.0"), + + REGULATOR_SUPPLY("DBVDD", "1-003a"), + REGULATOR_SUPPLY("LDOVDD", "1-003a"), + REGULATOR_SUPPLY("CPVDD", "1-003a"), + REGULATOR_SUPPLY("AVDD", "1-003a"), + REGULATOR_SUPPLY("DBVDD1", "spi0.1"), + REGULATOR_SUPPLY("DBVDD2", "spi0.1"), + REGULATOR_SUPPLY("DBVDD3", "spi0.1"), + REGULATOR_SUPPLY("LDOVDD", "spi0.1"), + REGULATOR_SUPPLY("CPVDD", "spi0.1"), + + REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"), + REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"), + REGULATOR_SUPPLY("CPVDD", "wm5102-codec"), + + REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"), + REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"), + REGULATOR_SUPPLY("CPVDD", "wm5110-codec"), }; static struct regulator_init_data pvdd_1v8 __devinitdata = { @@ -685,6 +727,7 @@ static struct i2c_board_info i2c_devs1[] __devinitdata = { .irq = S3C_EINT(0), .platform_data = &glenfarclas_pmic_pdata }, + { I2C_BOARD_INFO("wlf-gf-module", 0x20) }, { I2C_BOARD_INFO("wlf-gf-module", 0x22) }, { I2C_BOARD_INFO("wlf-gf-module", 0x24) }, { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, @@ -810,7 +853,7 @@ static void __init crag6410_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); - s3c64xx_spi0_set_platdata(NULL, 0, 1); + s3c64xx_spi0_set_platdata(NULL, 0, 2); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 111e404a81fd..8ae5800e807f 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -187,7 +187,6 @@ void __init s5p6440_map_io(void) s5p6440_default_sdhci2(); iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); - init_consistent_dma_size(SZ_8M); } void __init s5p6450_map_io(void) @@ -202,7 +201,6 @@ void __init s5p6450_map_io(void) s5p6450_default_sdhci2(); iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); - init_consistent_dma_size(SZ_8M); } /* diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index a0c50efe8145..9dfe93e2624d 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -169,8 +169,6 @@ void __init s5pv210_init_io(struct map_desc *mach_desc, int size) void __init s5pv210_map_io(void) { - init_consistent_dma_size(14 << 20); - /* initialise device information early */ s5pv210_default_sdhci0(); s5pv210_default_sdhci1(); diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 55e1dba4ffde..c72b31078c99 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -774,7 +774,6 @@ static void __init goni_pmic_init(void) /* MoviNAND */ static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { .max_width = 4, - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 6a7ad3c2a3fc..9a23739f7026 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/ioport.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/serial_core.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -37,7 +38,6 @@ #include <asm/mach/flash.h> #include <asm/mach/irda.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/assabet.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 038df4894b0f..b2dadf3ea3df 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/tty.h> @@ -34,7 +35,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/hardware/sa1111.h> -#include <asm/mach/serial_sa1100.h> #include <mach/badge4.h> diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index ad0eb08ea077..304bca4a07c0 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/tty.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/irq.h> #include <linux/mtd/mtd.h> @@ -27,7 +28,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/cerf.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 170cb6107f68..45f424f5fca6 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/delay.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -40,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index 63150e1ffe9e..f17e7382242a 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -17,12 +17,12 @@ #include <linux/mfd/htc-egpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/serial_core.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/h3xxx.h> diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index fc106aab7c7e..d005939c41fc 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/cpufreq.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/serial_core.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -35,7 +36,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index e3084f47027d..35cfc428b4d4 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/delay.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/mtd/mtd.h> @@ -30,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 3048b17e84c5..f69f78fc3ddd 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -4,6 +4,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/tty.h> #include <linux/gpio.h> #include <linux/leds.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 41f69d97066f..102e08f7b109 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/root_dev.h> @@ -24,7 +25,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/nanoengine.h> diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 266db873a4e4..88be0474f3d7 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -7,6 +7,7 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/serial_core.h> @@ -14,7 +15,6 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <asm/hardware/sa1111.h> #include <asm/sizes.h> diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 37fe0a0a5369..c51bb63f90fb 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -6,6 +6,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/ioport.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/irq.h> #include <linux/io.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <asm/mach/serial_sa1100.h> #include <mach/irqs.h> #include "generic.h" diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index ff6b7b35bca9..6460d25fbb88 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -5,6 +5,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/tty.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/shannon.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 71790e581d93..6d65f65fcb23 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -9,6 +9,7 @@ #include <linux/proc_fs.h> #include <linux/string.h> #include <linux/pm.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -23,7 +24,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/simpad.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 8ae100cc655c..4eddca14ae07 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -2,18 +2,6 @@ if ARCH_SHMOBILE comment "SH-Mobile System Type" -config ARCH_SH7367 - bool "SH-Mobile G3 (SH7367)" - select ARCH_WANT_OPTIONAL_GPIOLIB - select CPU_V6 - select SH_CLK_CPG - -config ARCH_SH7377 - bool "SH-Mobile G4 (SH7377)" - select ARCH_WANT_OPTIONAL_GPIOLIB - select CPU_V7 - select SH_CLK_CPG - config ARCH_SH7372 bool "SH-Mobile AP4 (SH7372)" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -50,17 +38,6 @@ config ARCH_EMEV2 comment "SH-Mobile Board Type" -config MACH_G3EVM - bool "G3EVM board" - depends on ARCH_SH7367 - select ARCH_REQUIRE_GPIOLIB - -config MACH_G4EVM - bool "G4EVM board" - depends on ARCH_SH7377 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - config MACH_AP4EVB bool "AP4EVB board" depends on ARCH_SH7372 @@ -95,6 +72,7 @@ config MACH_MACKEREL select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF config MACH_KOTA2 bool "KOTA2 board" @@ -146,8 +124,7 @@ menu "Memory configuration" config MEMORY_START hex "Physical memory start address" - default "0x50000000" if MACH_G3EVM - default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ + default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \ MACH_MACKEREL || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x41000000" if MACH_KOTA2 @@ -159,8 +136,6 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size" - default "0x08000000" if MACH_G3EVM - default "0x08000000" if MACH_G4EVM default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x1e000000" if MACH_KOTA2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fe2c97c179d1..0b7147928aa3 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -6,8 +6,6 @@ obj-y := timer.o console.o clock.o # CPU objects -obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o -obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o @@ -23,16 +21,12 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o # Pinmux setup pfc-y := -pfc-$(CONFIG_ARCH_SH7367) += pfc-sh7367.o -pfc-$(CONFIG_ARCH_SH7377) += pfc-sh7377.o pfc-$(CONFIG_ARCH_SH7372) += pfc-sh7372.o pfc-$(CONFIG_ARCH_SH73A0) += pfc-sh73a0.o pfc-$(CONFIG_ARCH_R8A7740) += pfc-r8a7740.o pfc-$(CONFIG_ARCH_R8A7779) += pfc-r8a7779.o # IRQ objects -obj-$(CONFIG_ARCH_SH7367) += entry-intc.o -obj-$(CONFIG_ARCH_SH7377) += entry-intc.o obj-$(CONFIG_ARCH_SH7372) += entry-intc.o obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o @@ -45,8 +39,6 @@ obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o # Board objects -obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o -obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 790dc68c4312..cefdd030361d 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -728,7 +728,7 @@ fsia_ick_out: static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; - struct clk *fdiv_clk = &sh7372_fsidivb_clk; + struct clk *fdiv_clk = clk_get(NULL, "fsidivb"); long fsib_rate = 0; long fdiv_rate = 0; int ackmd_bpfmd; diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 3cc8b1c21da9..499e6e376666 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1229,6 +1229,13 @@ static void __init eva_add_early_devices(void) shmobile_timer.init = eva_earlytimer_init; } +#define RESCNT2 IOMEM(0xe6188020) +static void eva_restart(char mode, const char *cmd) +{ + /* Do soft power on reset */ + writel((1 << 31), RESCNT2); +} + static const char *eva_boards_compat_dt[] __initdata = { "renesas,armadillo800eva", NULL, @@ -1243,4 +1250,5 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, + .restart = eva_restart, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c deleted file mode 100644 index b179d4c213bb..000000000000 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * G3EVM board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/sh_flctl.h> -#include <linux/usb/r8a66597.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/input/sh_keysc.h> -#include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/sh7367.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -/* - * IrDA - * - * S67: 5bit : ON power - * : 6bit : ON remote control - * OFF IrDA - */ - -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* USBHS */ -static void usb_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008)); -} - -static struct r8a66597_platdata usb_host_data = { - .on_chip = 1, - .port_power = usb_host_port_power, -}; - -static struct resource usb_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xe6890000, - .end = 0xe68900e5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xa20), /* USBHS_USHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_host_device = { - .name = "r8a66597_hcd", - .id = 0, - .dev = { - .platform_data = &usb_host_data, - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(usb_host_resources), - .resource = usb_host_resources, -}; - -/* KEYSC */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_5, - .scan_timing = 3, - .delay = 100, - .keycodes = { - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, - KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N, - KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, - KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, - KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, - KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xbe0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -static struct mtd_partition nand_partition_info[] = { - { - .name = "system", - .offset = 0, - .size = 64 * 1024 * 1024, - }, - { - .name = "userdata", - .offset = MTDPART_OFS_APPEND, - .size = 128 * 1024 * 1024, - }, - { - .name = "cache", - .offset = MTDPART_OFS_APPEND, - .size = 64 * 1024 * 1024, - }, -}; - -static struct resource nand_flash_resources[] = { - [0] = { - .start = 0xe6a30000, - .end = 0xe6a3009b, - .flags = IORESOURCE_MEM, - } -}; - -static struct sh_flctl_platform_data nand_flash_data = { - .parts = nand_partition_info, - .nr_parts = ARRAY_SIZE(nand_partition_info), - .flcmncr_val = QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E - | SHBUSSEL | SEL_16BIT, -}; - -static struct platform_device nand_flash_device = { - .name = "sh_flctl", - .resource = nand_flash_resources, - .num_resources = ARRAY_SIZE(nand_flash_resources), - .dev = { - .platform_data = &nand_flash_data, - }, -}; - -static struct resource irda_resources[] = { - [0] = { - .start = 0xE6D00000, - .end = 0xE6D01FD4 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x480), /* IRDA */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device irda_device = { - .name = "sh_irda", - .id = -1, - .resource = irda_resources, - .num_resources = ARRAY_SIZE(irda_resources), -}; - -static struct platform_device *g3evm_devices[] __initdata = { - &nor_flash_device, - &usb_host_device, - &keysc_device, - &nand_flash_device, - &irda_device, -}; - -static void __init g3evm_init(void) -{ - sh7367_pinmux_init(); - - /* Lit DS4 LED */ - gpio_request(GPIO_PORT22, NULL); - gpio_direction_output(GPIO_PORT22, 1); - gpio_export(GPIO_PORT22, 0); - - /* Lit DS8 LED */ - gpio_request(GPIO_PORT23, NULL); - gpio_direction_output(GPIO_PORT23, 1); - gpio_export(GPIO_PORT23, 0); - - /* Lit DS3 LED */ - gpio_request(GPIO_PORT24, NULL); - gpio_direction_output(GPIO_PORT24, 1); - gpio_export(GPIO_PORT24, 0); - - /* SCIFA1 */ - gpio_request(GPIO_FN_SCIFA1_TXD, NULL); - gpio_request(GPIO_FN_SCIFA1_RXD, NULL); - gpio_request(GPIO_FN_SCIFA1_CTS, NULL); - gpio_request(GPIO_FN_SCIFA1_RTS, NULL); - - /* USBHS */ - gpio_request(GPIO_FN_VBUS0, NULL); - gpio_request(GPIO_FN_PWEN, NULL); - gpio_request(GPIO_FN_OVCN, NULL); - gpio_request(GPIO_FN_OVCN2, NULL); - gpio_request(GPIO_FN_EXTLP, NULL); - gpio_request(GPIO_FN_IDIN, NULL); - - /* setup USB phy */ - __raw_writew(0x0300, IOMEM(0xe605810a)); /* USBCR1 */ - __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */ - __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */ - __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */ - - /* KEYSC @ CN7 */ - gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL); - gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL); - gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL); - gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL); - gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL); - gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL); - - /* FLCTL */ - gpio_request(GPIO_FN_FCE0, NULL); - gpio_request(GPIO_FN_D0_ED0_NAF0, NULL); - gpio_request(GPIO_FN_D1_ED1_NAF1, NULL); - gpio_request(GPIO_FN_D2_ED2_NAF2, NULL); - gpio_request(GPIO_FN_D3_ED3_NAF3, NULL); - gpio_request(GPIO_FN_D4_ED4_NAF4, NULL); - gpio_request(GPIO_FN_D5_ED5_NAF5, NULL); - gpio_request(GPIO_FN_D6_ED6_NAF6, NULL); - gpio_request(GPIO_FN_D7_ED7_NAF7, NULL); - gpio_request(GPIO_FN_D8_ED8_NAF8, NULL); - gpio_request(GPIO_FN_D9_ED9_NAF9, NULL); - gpio_request(GPIO_FN_D10_ED10_NAF10, NULL); - gpio_request(GPIO_FN_D11_ED11_NAF11, NULL); - gpio_request(GPIO_FN_D12_ED12_NAF12, NULL); - gpio_request(GPIO_FN_D13_ED13_NAF13, NULL); - gpio_request(GPIO_FN_D14_ED14_NAF14, NULL); - gpio_request(GPIO_FN_D15_ED15_NAF15, NULL); - gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL); - gpio_request(GPIO_FN_FRB, NULL); - /* FOE, FCDE, FSC on dedicated pins */ - __raw_writel(__raw_readl(IOMEM(0xe6158048)) & ~(1 << 15), IOMEM(0xe6158048)); - - /* IrDA */ - gpio_request(GPIO_FN_IRDA_OUT, NULL); - gpio_request(GPIO_FN_IRDA_IN, NULL); - gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); - - sh7367_add_standard_devices(); - - platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); -} - -MACHINE_START(G3EVM, "g3evm") - .map_io = sh7367_map_io, - .init_early = sh7367_add_early_devices, - .init_irq = sh7367_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = g3evm_init, - .init_late = shmobile_init_late, - .timer = &shmobile_timer, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c deleted file mode 100644 index 35c126caa4d8..000000000000 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * G4EVM board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/usb/r8a66597.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/input/sh_keysc.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/gpio.h> -#include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/sh7377.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "sh-gpio.h" - -/* - * SDHI - * - * SDHI0 : card detection is possible - * SDHI1 : card detection is impossible - * - * [G4-MAIN-BOARD] - * JP74 : short # DBG_2V8A for SDHI0 - * JP75 : NC # DBG_3V3A for SDHI0 - * JP76 : NC # DBG_3V3A_SD for SDHI0 - * JP77 : NC # 3V3A_SDIO for SDHI1 - * JP78 : short # DBG_2V8A for SDHI1 - * JP79 : NC # DBG_3V3A for SDHI1 - * JP80 : NC # DBG_3V3A_SD for SDHI1 - * - * [G4-CORE-BOARD] - * S32 : all off # to dissever from G3-CORE_DBG board - * S33 : all off # to dissever from G3-CORE_DBG board - * - * [G3-CORE_DBG-BOARD] - * S1 : all off # to dissever from G3-CORE_DBG board - * S3 : all off # to dissever from G3-CORE_DBG board - * S4 : all off # to dissever from G3-CORE_DBG board - */ - -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* USBHS */ -static void usb_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008)); -} - -static struct r8a66597_platdata usb_host_data = { - .on_chip = 1, - .port_power = usb_host_port_power, -}; - -static struct resource usb_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xe6890000, - .end = 0xe68900e5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0a20), /* USBHS_USHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_host_device = { - .name = "r8a66597_hcd", - .id = 0, - .dev = { - .platform_data = &usb_host_data, - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(usb_host_resources), - .resource = usb_host_resources, -}; - -/* KEYSC */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_5, - .scan_timing = 3, - .delay = 100, - .keycodes = { - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, - KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, - KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R, - KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X, - KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, - KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, - KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0be0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .id = 0, /* keysc0 clock */ - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), -}; - -/* SDHI */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .tmio_caps = MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi0_resources[] = { - [0] = { - .name = "SDHI0", - .start = 0xe6d50000, - .end = 0xe6d500ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e00), /* SDHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, - .dev = { - .platform_data = &sdhi0_info, - }, -}; - -static struct sh_mobile_sdhi_info sdhi1_info = { - .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi1_resources[] = { - [0] = { - .name = "SDHI1", - .start = 0xe6d60000, - .end = 0xe6d600ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e80), /* SDHI1 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi1_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi1_resources), - .resource = sdhi1_resources, - .id = 1, - .dev = { - .platform_data = &sdhi1_info, - }, -}; - -static struct platform_device *g4evm_devices[] __initdata = { - &nor_flash_device, - &usb_host_device, - &keysc_device, - &sdhi0_device, - &sdhi1_device, -}; - -#define GPIO_SDHID0_D0 IOMEM(0xe60520fc) -#define GPIO_SDHID0_D1 IOMEM(0xe60520fd) -#define GPIO_SDHID0_D2 IOMEM(0xe60520fe) -#define GPIO_SDHID0_D3 IOMEM(0xe60520ff) -#define GPIO_SDHICMD0 IOMEM(0xe6052100) - -#define GPIO_SDHID1_D0 IOMEM(0xe6052103) -#define GPIO_SDHID1_D1 IOMEM(0xe6052104) -#define GPIO_SDHID1_D2 IOMEM(0xe6052105) -#define GPIO_SDHID1_D3 IOMEM(0xe6052106) -#define GPIO_SDHICMD1 IOMEM(0xe6052107) - -static void __init g4evm_init(void) -{ - regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - - sh7377_pinmux_init(); - - /* Lit DS14 LED */ - gpio_request(GPIO_PORT109, NULL); - gpio_direction_output(GPIO_PORT109, 1); - gpio_export(GPIO_PORT109, 1); - - /* Lit DS15 LED */ - gpio_request(GPIO_PORT110, NULL); - gpio_direction_output(GPIO_PORT110, 1); - gpio_export(GPIO_PORT110, 1); - - /* Lit DS16 LED */ - gpio_request(GPIO_PORT112, NULL); - gpio_direction_output(GPIO_PORT112, 1); - gpio_export(GPIO_PORT112, 1); - - /* Lit DS17 LED */ - gpio_request(GPIO_PORT113, NULL); - gpio_direction_output(GPIO_PORT113, 1); - gpio_export(GPIO_PORT113, 1); - - /* USBHS */ - gpio_request(GPIO_FN_VBUS_0, NULL); - gpio_request(GPIO_FN_PWEN, NULL); - gpio_request(GPIO_FN_OVCN, NULL); - gpio_request(GPIO_FN_OVCN2, NULL); - gpio_request(GPIO_FN_EXTLP, NULL); - gpio_request(GPIO_FN_IDIN, NULL); - - /* setup USB phy */ - __raw_writew(0x0200, IOMEM(0xe605810a)); /* USBCR1 */ - __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */ - __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */ - __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */ - - /* KEYSC @ CN31 */ - gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL); - gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL); - gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL); - gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL); - gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL); - gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL); - - /* SDHI0 */ - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHICD0, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request_pullup(GPIO_SDHID0_D0); - gpio_request_pullup(GPIO_SDHID0_D1); - gpio_request_pullup(GPIO_SDHID0_D2); - gpio_request_pullup(GPIO_SDHID0_D3); - gpio_request_pullup(GPIO_SDHICMD0); - - /* SDHI1 */ - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHID1_0, NULL); - gpio_request(GPIO_FN_SDHID1_1, NULL); - gpio_request(GPIO_FN_SDHID1_2, NULL); - gpio_request(GPIO_FN_SDHID1_3, NULL); - gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_request_pullup(GPIO_SDHID1_D0); - gpio_request_pullup(GPIO_SDHID1_D1); - gpio_request_pullup(GPIO_SDHID1_D2); - gpio_request_pullup(GPIO_SDHID1_D3); - gpio_request_pullup(GPIO_SDHICMD1); - - sh7377_add_standard_devices(); - - platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); -} - -MACHINE_START(G4EVM, "g4evm") - .map_io = sh7377_map_io, - .init_early = sh7377_add_early_devices, - .init_irq = sh7377_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = g4evm_init, - .init_late = shmobile_init_late, - .timer = &shmobile_timer, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 0a43f3189c21..c02448d6847f 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[] = /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, @@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = { /* Micro SD */ static struct sh_mobile_sdhi_info sdhi2_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, @@ -548,7 +552,6 @@ static struct platform_device fsi_ak4648_device = { /* I2C */ static struct pcf857x_platform_data pcf8575_pdata = { .gpio_base = GPIO_PCF8575_BASE, - .irq = intcs_evt2irq(0x3260), /* IRQ19 */ }; static struct i2c_board_info i2c0_devices[] = { @@ -557,7 +560,15 @@ static struct i2c_board_info i2c0_devices[] = { }, { I2C_BOARD_INFO("r2025sd", 0x32), - } + }, + { + I2C_BOARD_INFO("ak8975", 0x0c), + .irq = intcs_evt2irq(0x3380), /* IRQ28 */ + }, + { + I2C_BOARD_INFO("adxl34x", 0x1d), + .irq = intcs_evt2irq(0x3340), /* IRQ26 */ + }, }; static struct i2c_board_info i2c1_devices[] = { @@ -570,6 +581,7 @@ static struct i2c_board_info i2c1_devices[] = { static struct i2c_board_info i2c3_devices[] = { { I2C_BOARD_INFO("pcf8575", 0x20), + .irq = intcs_evt2irq(0x3260), /* IRQ19 */ .platform_data = &pcf8575_pdata, }, }; diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 0c27c810cf99..f274252e4705 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -882,7 +882,7 @@ static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) static int fsi_b_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; - struct clk *fdiv_clk = &sh7372_fsidivb_clk; + struct clk *fdiv_clk = clk_get(NULL, "fsidivb"); long fsib_rate = 0; long fdiv_rate = 0; int ackmd_bpfmd; @@ -1651,7 +1651,12 @@ static void __init mackerel_init(void) pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } -MACHINE_START(MACKEREL, "mackerel") +static const char *mackerel_boards_compat_dt[] __initdata = { + "renesas,mackerel", + NULL, +}; + +DT_MACHINE_START(MACKEREL_DT, "mackerel") .map_io = sh7372_map_io, .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, @@ -1659,4 +1664,5 @@ MACHINE_START(MACKEREL, "mackerel") .init_machine = mackerel_init, .init_late = sh7372_pm_init_late, .timer = &shmobile_timer, + .dt_compat = mackerel_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index b8a7525a4e2f..69f7f464eff8 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -30,6 +30,8 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> +#include <linux/spi/spi.h> +#include <linux/spi/sh_hspi.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <mach/hardware.h> @@ -126,10 +128,27 @@ static struct platform_device thermal_device = { .num_resources = ARRAY_SIZE(thermal_resources), }; +/* HSPI */ +static struct resource hspi_resources[] = { + [0] = { + .start = 0xFFFC7000, + .end = 0xFFFC7018 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device hspi_device = { + .name = "sh-hspi", + .id = 0, + .resource = hspi_resources, + .num_resources = ARRAY_SIZE(hspi_resources), +}; + static struct platform_device *marzen_devices[] __initdata = { ð_device, &sdhi0_device, &thermal_device, + &hspi_device, }; static void __init marzen_init(void) @@ -163,6 +182,12 @@ static void __init marzen_init(void) gpio_request(GPIO_FN_SD0_CD, NULL); gpio_request(GPIO_FN_SD0_WP, NULL); + /* HSPI 0 */ + gpio_request(GPIO_FN_HSPI_CLK0, NULL); + gpio_request(GPIO_FN_HSPI_CS0, NULL); + gpio_request(GPIO_FN_HSPI_TX0, NULL); + gpio_request(GPIO_FN_HSPI_RX0, NULL); + r8a7779_add_standard_devices(); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 6729e0032180..eac49d59782f 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -65,6 +65,9 @@ #define SMSTPCR3 IOMEM(0xe615013c) #define SMSTPCR4 IOMEM(0xe6150140) +#define FSIDIVA IOMEM(0xFE1F8000) +#define FSIDIVB IOMEM(0xFE1F8008) + /* Fixed 32 KHz root clock from EXTALR pin */ static struct clk extalr_clk = { .rate = 32768, @@ -188,6 +191,22 @@ static struct clk pllc1_div2_clk = { }; /* USB clock */ +/* + * USBCKCR is controlling usb24 clock + * bit[7] : parent clock + * bit[6] : clock divide rate + * And this bit[7] is used as a "usb24s" from other devices. + * (Video clock / Sub clock / SPU clock) + * You can controll this clock as a below. + * + * struct clk *usb24 = clk_get(dev, "usb24"); + * struct clk *usb24s = clk_get(NULL, "usb24s"); + * struct clk *system = clk_get(NULL, "system_clk"); + * int rate = clk_get_rate(system); + * + * clk_set_parent(usb24s, system); // for bit[7] + * clk_set_rate(usb24, rate / 2); // for bit[6] + */ static struct clk *usb24s_parents[] = { [0] = &system_clk, [1] = &extal2_clk @@ -427,6 +446,14 @@ static struct clk *late_main_clks[] = { &hdmi2_clk, }; +/* FSI DIV */ +enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR }; + +static struct clk fsidivs[] = { + [FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]), + [FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]), +}; + /* MSTP */ enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP, @@ -596,6 +623,10 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), + CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), + CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), + CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk), + CLKDEV_ICK_ID("xckb", "sh_fsi2", &fsibck_clk), }; void __init r8a7740_clock_init(u8 md_ck) @@ -641,6 +672,9 @@ void __init r8a7740_clock_init(u8 md_ck) for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) ret = clk_register(late_main_clks[k]); + if (!ret) + ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 37b2a3133b3b..c019609da660 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -87,8 +87,11 @@ static struct clk div4_clks[DIV4_NR] = { }; enum { MSTP323, MSTP322, MSTP321, MSTP320, - MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, + MSTP101, MSTP100, + MSTP030, + MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP014, + MSTP007, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { @@ -96,6 +99,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */ [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */ + [MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 1, 0), /* USB2 */ + [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0), /* USB0/1 */ + [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */ + [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */ + [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */ + [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */ [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */ [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */ [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */ @@ -105,6 +114,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */ [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */ [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */ + [MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0, 7, 0), /* HSPI */ }; static unsigned long mul4_recalc(struct clk *clk) @@ -146,14 +156,25 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]), /* MSTP32 clocks */ + CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */ + CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */ + CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ + CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */ + CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ + CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ + CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ + CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ + CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ + CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ + CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c deleted file mode 100644 index ef0a95e592c4..000000000000 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ /dev/null @@ -1,355 +0,0 @@ -/* - * SH7367 clock framework support - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include <mach/common.h> - -/* SH7367 registers */ -#define RTFRQCR IOMEM(0xe6150000) -#define SYFRQCR IOMEM(0xe6150004) -#define CMFRQCR IOMEM(0xe61500E0) -#define VCLKCR1 IOMEM(0xe6150008) -#define VCLKCR2 IOMEM(0xe615000C) -#define VCLKCR3 IOMEM(0xe615001C) -#define SCLKACR IOMEM(0xe6150010) -#define SCLKBCR IOMEM(0xe6150014) -#define SUBUSBCKCR IOMEM(0xe6158080) -#define SPUCKCR IOMEM(0xe6150084) -#define MSUCKCR IOMEM(0xe6150088) -#define MVI3CKCR IOMEM(0xe6150090) -#define VOUCKCR IOMEM(0xe6150094) -#define MFCK1CR IOMEM(0xe6150098) -#define MFCK2CR IOMEM(0xe615009C) -#define PLLC1CR IOMEM(0xe6150028) -#define PLLC2CR IOMEM(0xe615002C) -#define RTMSTPCR0 IOMEM(0xe6158030) -#define RTMSTPCR2 IOMEM(0xe6158038) -#define SYMSTPCR0 IOMEM(0xe6158040) -#define SYMSTPCR2 IOMEM(0xe6158048) -#define CMMSTPCR0 IOMEM(0xe615804c) - -/* Fixed 32 KHz root clock from EXTALR pin */ -static struct clk r_clk = { - .rate = 32768, -}; - -/* - * 26MHz default rate for the EXTALB1 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7367_extalb1_clk = { - .rate = 26666666, -}; - -/* - * 48MHz default rate for the EXTAL2 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7367_extal2_clk = { - .rate = 48000000, -}; - -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc(struct clk *clk) -{ - return clk->parent->rate / 2; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; - -/* Divide extalb1 by two */ -static struct clk extalb1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7367_extalb1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7367_extal2_clk, -}; - -/* PLLC1 */ -static unsigned long pllc1_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC1CR) & (1 << 14)) - mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc1_clk_ops = { - .recalc = pllc1_recalc, -}; - -static struct clk pllc1_clk = { - .ops = &pllc1_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalb1_div2_clk, -}; - -/* Divide PLLC1 by two */ -static struct clk pllc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pllc1_clk, -}; - -/* PLLC2 */ -static unsigned long pllc2_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC2CR) & (1 << 31)) - mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc2_clk_ops = { - .recalc = pllc2_recalc, -}; - -static struct clk pllc2_clk = { - .ops = &pllc2_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalb1_div2_clk, -}; - -static struct clk *main_clks[] = { - &r_clk, - &sh7367_extalb1_clk, - &sh7367_extal2_clk, - &extalb1_div2_clk, - &extal2_div2_clk, - &pllc1_clk, - &pllc1_div2_clk, - &pllc2_clk, -}; - -static void div4_kick(struct clk *clk) -{ - unsigned long value; - - /* set KICK bit in SYFRQCR to update hardware setting */ - value = __raw_readl(SYFRQCR); - value |= (1 << 31); - __raw_writel(value, SYFRQCR); -} - -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, - 24, 32, 36, 48, 0, 72, 0, 0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, - .kick = div4_kick, -}; - -enum { DIV4_I, DIV4_G, DIV4_S, DIV4_B, - DIV4_ZX, DIV4_ZT, DIV4_Z, DIV4_ZD, DIV4_HP, - DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR }; - -#define DIV4(_reg, _bit, _mask, _flags) \ - SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_G] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_S] = DIV4(RTFRQCR, 12, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_ZX] = DIV4(SYFRQCR, 20, 0x6fff, 0), - [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0), - [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0), - [DIV4_ZD] = DIV4(SYFRQCR, 8, 0x6fff, 0), - [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0), - [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0), - [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0), - [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0), - [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0), -}; - -enum { DIV6_SUB, DIV6_SIUA, DIV6_SIUB, DIV6_MSU, DIV6_SPU, - DIV6_MVI3, DIV6_MF1, DIV6_MF2, - DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VOU, - DIV6_NR }; - -static struct clk div6_clks[DIV6_NR] = { - [DIV6_SUB] = SH_CLK_DIV6(&sh7367_extal2_clk, SUBUSBCKCR, 0), - [DIV6_SIUA] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKACR, 0), - [DIV6_SIUB] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKBCR, 0), - [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0), - [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), - [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0), - [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0), - [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0), - [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), - [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), - [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), - [DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0), -}; - -enum { RTMSTP001, - RTMSTP231, RTMSTP230, RTMSTP229, RTMSTP228, RTMSTP226, - RTMSTP216, RTMSTP206, RTMSTP205, RTMSTP201, - SYMSTP023, SYMSTP007, SYMSTP006, SYMSTP004, - SYMSTP003, SYMSTP002, SYMSTP001, SYMSTP000, - SYMSTP231, SYMSTP229, SYMSTP225, SYMSTP223, SYMSTP222, - SYMSTP215, SYMSTP214, SYMSTP213, SYMSTP211, - CMMSTP003, - MSTP_NR }; - -#define MSTP(_parent, _reg, _bit, _flags) \ - SH_CLK_MSTP32(_parent, _reg, _bit, _flags) - -static struct clk mstp_clks[MSTP_NR] = { - [RTMSTP001] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR0, 1, 0), /* IIC2 */ - [RTMSTP231] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 31, 0), /* VEU3 */ - [RTMSTP230] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 30, 0), /* VEU2 */ - [RTMSTP229] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 29, 0), /* VEU1 */ - [RTMSTP228] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 28, 0), /* VEU0 */ - [RTMSTP226] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 26, 0), /* VEU2H */ - [RTMSTP216] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR2, 16, 0), /* IIC0 */ - [RTMSTP206] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 6, 0), /* JPU */ - [RTMSTP205] = MSTP(&div6_clks[DIV6_VOU], RTMSTPCR2, 5, 0), /* VOU */ - [RTMSTP201] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 1, 0), /* VPU */ - [SYMSTP023] = MSTP(&div6_clks[DIV6_SPU], SYMSTPCR0, 23, 0), /* SPU1 */ - [SYMSTP007] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 7, 0), /* SCIFA5 */ - [SYMSTP006] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 6, 0), /* SCIFB */ - [SYMSTP004] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 4, 0), /* SCIFA0 */ - [SYMSTP003] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 3, 0), /* SCIFA1 */ - [SYMSTP002] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 2, 0), /* SCIFA2 */ - [SYMSTP001] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 1, 0), /* SCIFA3 */ - [SYMSTP000] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 0, 0), /* SCIFA4 */ - [SYMSTP231] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 31, 0), /* SIU */ - [SYMSTP229] = MSTP(&r_clk, SYMSTPCR2, 29, 0), /* CMT10 */ - [SYMSTP225] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 25, 0), /* IRDA */ - [SYMSTP223] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 23, 0), /* IIC1 */ - [SYMSTP222] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 22, 0), /* USBHS */ - [SYMSTP215] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 15, 0), /* FLCTL */ - [SYMSTP214] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 14, 0), /* SDHI0 */ - [SYMSTP213] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 13, 0), /* SDHI1 */ - [SYMSTP211] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 11, 0), /* SDHI2 */ - [CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */ -}; - -static struct clk_lookup lookups[] = { - /* main clocks */ - CLKDEV_CON_ID("r_clk", &r_clk), - CLKDEV_CON_ID("extalb1", &sh7367_extalb1_clk), - CLKDEV_CON_ID("extal2", &sh7367_extal2_clk), - CLKDEV_CON_ID("extalb1_div2_clk", &extalb1_div2_clk), - CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), - CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), - CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), - CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), - - /* DIV4 clocks */ - CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), - CLKDEV_CON_ID("g_clk", &div4_clks[DIV4_G]), - CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), - CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]), - CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), - CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]), - CLKDEV_CON_ID("zd_clk", &div4_clks[DIV4_ZD]), - CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), - CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]), - CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), - CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), - CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), - - /* DIV6 clocks */ - CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), - CLKDEV_CON_ID("siua_clk", &div6_clks[DIV6_SIUA]), - CLKDEV_CON_ID("siub_clk", &div6_clks[DIV6_SIUB]), - CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]), - CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), - CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]), - CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]), - CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]), - CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), - CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), - CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), - CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[RTMSTP001]), /* IIC2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[RTMSTP231]), /* VEU3 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[RTMSTP230]), /* VEU2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[RTMSTP229]), /* VEU1 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[RTMSTP228]), /* VEU0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[RTMSTP226]), /* VEU2H */ - CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[RTMSTP216]), /* IIC0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[RTMSTP206]), /* JPU */ - CLKDEV_DEV_ID("sh-vou", &mstp_clks[RTMSTP205]), /* VOU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[RTMSTP201]), /* VPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[SYMSTP023]), /* SPU1 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[SYMSTP007]), /* SCIFA5 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[SYMSTP006]), /* SCIFB */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[SYMSTP004]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[SYMSTP003]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[SYMSTP002]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[SYMSTP229]), /* CMT10 */ - CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */ - CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[SYMSTP222]), /* USBHS */ - CLKDEV_DEV_ID("sh_flctl", &mstp_clks[SYMSTP215]), /* FLCTL */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[SYMSTP214]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[SYMSTP213]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[SYMSTP211]), /* SDHI2 */ - CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[CMMSTP003]), /* KEYSC */ -}; - -void __init sh7367_clock_init(void) -{ - int k, ret = 0; - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup sh7367 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 430a90ffa120..4d57e342537b 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -420,87 +420,11 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { }; /* FSI DIV */ -static unsigned long fsidiv_recalc(struct clk *clk) -{ - unsigned long value; - - value = __raw_readl(clk->mapping->base); - - value >>= 16; - if (value < 2) - return 0; - - return clk->parent->rate / value; -} - -static long fsidiv_round_rate(struct clk *clk, unsigned long rate) -{ - return clk_rate_div_range_round(clk, 2, 0xffff, rate); -} - -static void fsidiv_disable(struct clk *clk) -{ - __raw_writel(0, clk->mapping->base); -} - -static int fsidiv_enable(struct clk *clk) -{ - unsigned long value; - - value = __raw_readl(clk->mapping->base) >> 16; - if (value < 2) - return -EIO; - - __raw_writel((value << 16) | 0x3, clk->mapping->base); - - return 0; -} +enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR }; -static int fsidiv_set_rate(struct clk *clk, unsigned long rate) -{ - int idx; - - idx = (clk->parent->rate / rate) & 0xffff; - if (idx < 2) - return -EINVAL; - - __raw_writel(idx << 16, clk->mapping->base); - return 0; -} - -static struct sh_clk_ops fsidiv_clk_ops = { - .recalc = fsidiv_recalc, - .round_rate = fsidiv_round_rate, - .set_rate = fsidiv_set_rate, - .enable = fsidiv_enable, - .disable = fsidiv_disable, -}; - -static struct clk_mapping fsidiva_clk_mapping = { - .phys = FSIDIVA, - .len = 8, -}; - -struct clk sh7372_fsidiva_clk = { - .ops = &fsidiv_clk_ops, - .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */ - .mapping = &fsidiva_clk_mapping, -}; - -static struct clk_mapping fsidivb_clk_mapping = { - .phys = FSIDIVB, - .len = 8, -}; - -struct clk sh7372_fsidivb_clk = { - .ops = &fsidiv_clk_ops, - .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */ - .mapping = &fsidivb_clk_mapping, -}; - -static struct clk *late_main_clks[] = { - &sh7372_fsidiva_clk, - &sh7372_fsidivb_clk, +static struct clk fsidivs[] = { + [FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]), + [FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]), }; enum { MSTP001, MSTP000, @@ -583,6 +507,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk), + CLKDEV_CON_ID("fsidiva", &fsidivs[FSIDIV_A]), + CLKDEV_CON_ID("fsidivb", &fsidivs[FSIDIV_B]), /* DIV4 clocks */ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), @@ -678,6 +604,10 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]), + CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), + CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), + CLKDEV_ICK_ID("xcka", "sh_fsi2", &sh7372_fsiack_clk), + CLKDEV_ICK_ID("xckb", "sh_fsi2", &sh7372_fsibck_clk), }; void __init sh7372_clock_init(void) @@ -706,8 +636,8 @@ void __init sh7372_clock_init(void) if (!ret) ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) - ret = clk_register(late_main_clks[k]); + if (!ret) + ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR); clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c deleted file mode 100644 index b8480d19e1c8..000000000000 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * SH7377 clock framework support - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include <mach/common.h> - -/* SH7377 registers */ -#define RTFRQCR IOMEM(0xe6150000) -#define SYFRQCR IOMEM(0xe6150004) -#define CMFRQCR IOMEM(0xe61500E0) -#define VCLKCR1 IOMEM(0xe6150008) -#define VCLKCR2 IOMEM(0xe615000C) -#define VCLKCR3 IOMEM(0xe615001C) -#define FMSICKCR IOMEM(0xe6150010) -#define FMSOCKCR IOMEM(0xe6150014) -#define FSICKCR IOMEM(0xe6150018) -#define PLLC1CR IOMEM(0xe6150028) -#define PLLC2CR IOMEM(0xe615002C) -#define SUBUSBCKCR IOMEM(0xe6150080) -#define SPUCKCR IOMEM(0xe6150084) -#define MSUCKCR IOMEM(0xe6150088) -#define MVI3CKCR IOMEM(0xe6150090) -#define HDMICKCR IOMEM(0xe6150094) -#define MFCK1CR IOMEM(0xe6150098) -#define MFCK2CR IOMEM(0xe615009C) -#define DSITCKCR IOMEM(0xe6150060) -#define DSIPCKCR IOMEM(0xe6150064) -#define SMSTPCR0 IOMEM(0xe6150130) -#define SMSTPCR1 IOMEM(0xe6150134) -#define SMSTPCR2 IOMEM(0xe6150138) -#define SMSTPCR3 IOMEM(0xe615013C) -#define SMSTPCR4 IOMEM(0xe6150140) - -/* Fixed 32 KHz root clock from EXTALR pin */ -static struct clk r_clk = { - .rate = 32768, -}; - -/* - * 26MHz default rate for the EXTALC1 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7377_extalc1_clk = { - .rate = 26666666, -}; - -/* - * 48MHz default rate for the EXTAL2 root input clock. - * If needed, reset this with clk_set_rate() from the platform code. - */ -struct clk sh7377_extal2_clk = { - .rate = 48000000, -}; - -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc(struct clk *clk) -{ - return clk->parent->rate / 2; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; - -/* Divide extalc1 by two */ -static struct clk extalc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7377_extalc1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7377_extal2_clk, -}; - -/* Divide extal2 by four */ -static struct clk extal2_div4_clk = { - .ops = &div2_clk_ops, - .parent = &extal2_div2_clk, -}; - -/* PLLC1 */ -static unsigned long pllc1_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC1CR) & (1 << 14)) - mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc1_clk_ops = { - .recalc = pllc1_recalc, -}; - -static struct clk pllc1_clk = { - .ops = &pllc1_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalc1_div2_clk, -}; - -/* Divide PLLC1 by two */ -static struct clk pllc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pllc1_clk, -}; - -/* PLLC2 */ -static unsigned long pllc2_recalc(struct clk *clk) -{ - unsigned long mult = 1; - - if (__raw_readl(PLLC2CR) & (1 << 31)) - mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2; - - return clk->parent->rate * mult; -} - -static struct sh_clk_ops pllc2_clk_ops = { - .recalc = pllc2_recalc, -}; - -static struct clk pllc2_clk = { - .ops = &pllc2_clk_ops, - .flags = CLK_ENABLE_ON_INIT, - .parent = &extalc1_div2_clk, -}; - -static struct clk *main_clks[] = { - &r_clk, - &sh7377_extalc1_clk, - &sh7377_extal2_clk, - &extalc1_div2_clk, - &extal2_div2_clk, - &extal2_div4_clk, - &pllc1_clk, - &pllc1_div2_clk, - &pllc2_clk, -}; - -static void div4_kick(struct clk *clk) -{ - unsigned long value; - - /* set KICK bit in SYFRQCR to update hardware setting */ - value = __raw_readl(SYFRQCR); - value |= (1 << 31); - __raw_writel(value, SYFRQCR); -} - -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, - 24, 32, 36, 48, 0, 72, 96, 0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, - .kick = div4_kick, -}; - -enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR, - DIV4_ZTR, DIV4_ZT, DIV4_Z, DIV4_HP, - DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR }; - -#define DIV4(_reg, _bit, _mask, _flags) \ - SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags) - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_ZG] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_M1] = DIV4(RTFRQCR, 4, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_CSIR] = DIV4(RTFRQCR, 0, 0x6fff, 0), - [DIV4_ZTR] = DIV4(SYFRQCR, 20, 0x6fff, 0), - [DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0), - [DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0), - [DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0), - [DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0), - [DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0), - [DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0), - [DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0), -}; - -enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO, - DIV6_FSI, DIV6_SUB, DIV6_SPU, DIV6_MSU, DIV6_MVI3, DIV6_HDMI, - DIV6_MF1, DIV6_MF2, DIV6_DSIT, DIV6_DSIP, - DIV6_NR }; - -static struct clk div6_clks[] = { - [DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0), - [DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0), - [DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0), - [DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0), - [DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0), - [DIV6_FSI] = SH_CLK_DIV6(&pllc1_div2_clk, FSICKCR, 0), - [DIV6_SUB] = SH_CLK_DIV6(&sh7377_extal2_clk, SUBUSBCKCR, 0), - [DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0), - [DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0), - [DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0), - [DIV6_HDMI] = SH_CLK_DIV6(&pllc1_div2_clk, HDMICKCR, 0), - [DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0), - [DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0), - [DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0), - [DIV6_DSIP] = SH_CLK_DIV6(&pllc1_div2_clk, DSIPCKCR, 0), -}; - -enum { MSTP001, - MSTP131, MSTP130, MSTP129, MSTP128, MSTP116, MSTP106, MSTP101, - MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP322, - MSTP315, MSTP314, MSTP313, - MSTP403, - MSTP_NR }; - -#define MSTP(_parent, _reg, _bit, _flags) \ - SH_CLK_MSTP32(_parent, _reg, _bit, _flags) - -static struct clk mstp_clks[] = { - [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ - [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ - [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ - [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ - [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ - [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ - [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */ - [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */ - [MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */ - [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ - [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ - [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ - [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ - [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ - [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ - [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ - [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IRDA */ - [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ - [MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL */ - [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ - [MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ - [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ -}; - -static struct clk_lookup lookups[] = { - /* main clocks */ - CLKDEV_CON_ID("r_clk", &r_clk), - CLKDEV_CON_ID("extalc1", &sh7377_extalc1_clk), - CLKDEV_CON_ID("extal2", &sh7377_extal2_clk), - CLKDEV_CON_ID("extalc1_div2_clk", &extalc1_div2_clk), - CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk), - CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk), - CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), - CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), - CLKDEV_CON_ID("pllc2_clk", &pllc2_clk), - - /* DIV4 clocks */ - CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), - CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]), - CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), - CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]), - CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]), - CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]), - CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), - CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]), - CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), - CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]), - CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]), - CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]), - CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]), - - /* DIV6 clocks */ - CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), - CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), - CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), - CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), - CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("fsi_clk", &div6_clks[DIV6_FSI]), - CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), - CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), - CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]), - CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]), - CLKDEV_CON_ID("hdmi_clk", &div6_clks[DIV6_HDMI]), - CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]), - CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]), - CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]), - CLKDEV_CON_ID("dsip_clk", &div6_clks[DIV6_DSIP]), - - /* MSTP32 clocks */ - CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ - CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */ - CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */ - CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ - CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP206]), /* SCIFB */ - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ - CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */ - CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USBHS */ - CLKDEV_DEV_ID("sh_flctl", &mstp_clks[MSTP315]), /* FLCTL */ - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ - CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ -}; - -void __init sh7377_clock_init(void) -{ - int k, ret = 0; - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup sh7377 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index d47e215aca87..dfeca79e9e96 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -18,24 +18,6 @@ extern int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); -extern void sh7367_init_irq(void); -extern void sh7367_map_io(void); -extern void sh7367_add_early_devices(void); -extern void sh7367_add_standard_devices(void); -extern void sh7367_clock_init(void); -extern void sh7367_pinmux_init(void); -extern struct clk sh7367_extalb1_clk; -extern struct clk sh7367_extal2_clk; - -extern void sh7377_init_irq(void); -extern void sh7377_map_io(void); -extern void sh7377_add_early_devices(void); -extern void sh7377_add_standard_devices(void); -extern void sh7377_clock_init(void); -extern void sh7377_pinmux_init(void); -extern struct clk sh7377_extalc1_clk; -extern struct clk sh7377_extal2_clk; - extern void sh7372_init_irq(void); extern void sh7372_map_io(void); extern void sh7372_add_early_devices(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 499f52d2a4a1..8ab0cd6ad6b0 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -71,7 +71,7 @@ enum { GPIO_FN_A19, /* IPSR0 */ - GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0, + GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0, GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2, GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF, GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3, diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h deleted file mode 100644 index 52d0de686f68..000000000000 --- a/arch/arm/mach-shmobile/include/mach/sh7367.h +++ /dev/null @@ -1,332 +0,0 @@ -#ifndef __ASM_SH7367_H__ -#define __ASM_SH7367_H__ - -/* Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* 49-1 -> 49-6 (GPIO) */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119, - - GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124, - GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169, - - GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174, - GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179, - - GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184, - GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189, - - GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, - GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, - - GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, - GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, - - GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, - GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, - - GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, - GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, - - GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, - GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, - - GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, - GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269, - - GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU, - GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU, - GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU, - GPIO_FN_PORT58_KEYIN6_PU, - - /* 49-1 (FN) */ - GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2, - GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6, - GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10, - GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2, - GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5, - GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2, - GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20, - GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22, - GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7, - GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2, - GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK, - GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, - GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, - GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK, - GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS, - - /* 49-2 (FN) */ - GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0, - GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK, - GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0, - GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1, - GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2, - GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3, - GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4, - GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5, - GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0, - GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1, - GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2, - GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC, - GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK, - GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD, - GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD, - GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3, - GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4, - GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5, - GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6, - GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1, - GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2, - GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A, - GPIO_FN_XTALB1L, - GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS, - GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK, - GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD, - GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD, - GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS, - GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS, - GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0, - GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1, - GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2, - GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3, - GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0, - GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1, - GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2, - GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3, - GPIO_FN_NMI, GPIO_FN_TPU4TO0, - GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3, - GPIO_FN_IRQ_TMPB, - GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1, - GPIO_FN_OVCN, GPIO_FN_MFG1_IN1, - GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2, - - /* 49-3 (FN) */ - GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2, - GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN, - GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1, - GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2, - GPIO_FN_SCIFA5_RXD, - GPIO_FN_SCIFA5_TXD, - GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1, - GPIO_FN_A0_EA0, GPIO_FN_BS, - GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0, - GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL, - GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2, - GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1, - GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3, - GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC, - GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4, - GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5, - GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD, - GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0, - GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1, - GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC, - GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2, - GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3, - GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4, - GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD, - GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5, - GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2, - GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL, - GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2, - GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5, - GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8, - GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11, - GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13, - GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15, - GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1, - GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A, - GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD, - GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE, - GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO, - GPIO_FN_NBRSTOUT, GPIO_FN_NBRST, - - /* 49-4 (FN) */ - GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD, - GPIO_FN_VIO_VD, GPIO_FN_VIO_HD, - GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2, - GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5, - GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8, - GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11, - GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14, - GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD, - GPIO_FN_VIO_CKO, - GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2, - GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0, - GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1, - GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2, - GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3, - GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0, - GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2, - GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1, - GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2, - GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1, - GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3, - GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1, - GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4, - GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2, - GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5, - GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2, - GPIO_FN_LCDD6, GPIO_FN_DV_D6, - GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2, - GPIO_FN_LCDD7, GPIO_FN_DV_D7, - GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3, - GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16, - GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17, - GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18, - GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19, - GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20, - GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21, - GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22, - GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23, - GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24, - GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25, - GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK, - GPIO_FN_D26, GPIO_FN_ED26, - GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC, - GPIO_FN_D27, GPIO_FN_ED27, - GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, - GPIO_FN_D28, GPIO_FN_ED28, - GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, - GPIO_FN_D29, GPIO_FN_ED29, - GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1, - GPIO_FN_D30, GPIO_FN_ED30, - GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2, - GPIO_FN_D31, GPIO_FN_ED31, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD, - GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC, - - - /* 49-5 (FN) */ - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK, - GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI, - GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD, - GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD, - GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3, - GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7, - GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR, - GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR, - GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0, - GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1, - GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON, - GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS, - GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD, - GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2, - GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2, - GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2, - GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1, - GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3, - GPIO_FN_MSIOF1_SS2, - GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT, - GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL, - GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3, - GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3, - GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1, - GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK, - GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC, - GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD, - GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW, - GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, - GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, - GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2, - GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD, - GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, - GPIO_FN_SDHICLK0, GPIO_FN_TCK2, - GPIO_FN_SDHICD0, - GPIO_FN_SDHID0_0, GPIO_FN_TMS2, - GPIO_FN_SDHID0_1, GPIO_FN_TDO2, - GPIO_FN_SDHID0_2, GPIO_FN_TDI2, - GPIO_FN_SDHID0_3, GPIO_FN_RTCK2, - - /* 49-6 (FN) */ - GPIO_FN_SDHICMD0, GPIO_FN_TRST2, - GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2, - GPIO_FN_SDHICLK1, GPIO_FN_TCK3, - GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, - GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3, - GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2, - GPIO_FN_TS_SDAT2, GPIO_FN_TDO3, - GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, - GPIO_FN_TS_SDEN2, GPIO_FN_TDI3, - GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, - GPIO_FN_TS_SCK2, GPIO_FN_RTCK3, - GPIO_FN_SDHICMD1, GPIO_FN_TRST3, - GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK, - GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD, - GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS, - GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD, - GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS, - GPIO_FN_SDHICMD2, - GPIO_FN_RESETOUTS, - GPIO_FN_DIVLOCK, -}; - -#endif /* __ASM_SH7367_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index eb98b45c5089..26cd1016fad8 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -452,6 +452,10 @@ enum { SHDMA_SLAVE_SCIF5_RX, SHDMA_SLAVE_SCIF6_TX, SHDMA_SLAVE_SCIF6_RX, + SHDMA_SLAVE_FLCTL0_TX, + SHDMA_SLAVE_FLCTL0_RX, + SHDMA_SLAVE_FLCTL1_TX, + SHDMA_SLAVE_FLCTL1_RX, SHDMA_SLAVE_SDHI0_RX, SHDMA_SLAVE_SDHI0_TX, SHDMA_SLAVE_SDHI1_RX, @@ -475,8 +479,6 @@ extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; extern struct clk sh7372_fsiack_clk; extern struct clk sh7372_fsibck_clk; -extern struct clk sh7372_fsidiva_clk; -extern struct clk sh7372_fsidivb_clk; extern void sh7372_intcs_suspend(void); extern void sh7372_intcs_resume(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h deleted file mode 100644 index f580e227dd1c..000000000000 --- a/arch/arm/mach-shmobile/include/mach/sh7377.h +++ /dev/null @@ -1,360 +0,0 @@ -#ifndef __ASM_SH7377_H__ -#define __ASM_SH7377_H__ - -/* Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU - */ -enum { - /* 55-1 -> 55-5 (GPIO) */ - GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4, - GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9, - - GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14, - GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19, - - GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24, - GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29, - - GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34, - GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39, - - GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44, - GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49, - - GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54, - GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59, - - GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64, - GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69, - - GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74, - GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79, - - GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84, - GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89, - - GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94, - GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99, - - GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104, - GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109, - - GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114, - GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, - - GPIO_PORT128, GPIO_PORT129, - - GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134, - GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139, - - GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144, - GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149, - - GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154, - GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159, - - GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164, - - GPIO_PORT192, GPIO_PORT193, GPIO_PORT194, - GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199, - - GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204, - GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209, - - GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214, - GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219, - - GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224, - GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229, - - GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234, - GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239, - - GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244, - GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249, - - GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254, - GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259, - - GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264, - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU, - GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU, - GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU, - GPIO_FN_PORT72_KEYIN6_PU, - - /* 55-1 (FN) */ - GPIO_FN_VBUS_0, - GPIO_FN_CPORT0, - GPIO_FN_CPORT1, - GPIO_FN_CPORT2, - GPIO_FN_CPORT3, - GPIO_FN_CPORT4, - GPIO_FN_CPORT5, - GPIO_FN_CPORT6, - GPIO_FN_CPORT7, - GPIO_FN_CPORT8, - GPIO_FN_CPORT9, - GPIO_FN_CPORT10, - GPIO_FN_CPORT11, GPIO_FN_SIN2, - GPIO_FN_CPORT12, GPIO_FN_XCTS2, - GPIO_FN_CPORT13, GPIO_FN_RFSPO4, - GPIO_FN_CPORT14, GPIO_FN_RFSPO5, - GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2, - GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3, - GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2, - GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2, - GPIO_FN_CPORT19_MPORT1, - GPIO_FN_CPORT20, GPIO_FN_RFSPO6, - GPIO_FN_CPORT21, GPIO_FN_STATUS0, - GPIO_FN_CPORT22, GPIO_FN_STATUS1, - GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7, - GPIO_FN_B_SYNLD1, - GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK, - GPIO_FN_XMAINPS, - GPIO_FN_XDIVPS, - GPIO_FN_XIDRST, - GPIO_FN_IDCLK, GPIO_FN_IC_DP, - GPIO_FN_IDIO, GPIO_FN_IC_DM, - GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT, - GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, - GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK, - GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS, - GPIO_FN_PCMCLKO, - GPIO_FN_SYNC8KO, - - /* 55-2 (FN) */ - GPIO_FN_DNPCM_A, - GPIO_FN_UPPCM_A, - GPIO_FN_VACK, - GPIO_FN_XTALB1L, - GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS, - GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD, - GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS, - GPIO_FN_GPS_IM, - GPIO_FN_GPS_IS, - GPIO_FN_GPS_QM, - GPIO_FN_GPS_QS, - GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, - GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3, - GPIO_FN_FMSIOLR, - GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1, - GPIO_FN_FMSIOBT, - GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2, - GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, - GPIO_FN_OPORT3, GPIO_FN_FMSIILR, - GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, - GPIO_FN_FMSIIBT, - GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0, - GPIO_FN_A0_EA0, GPIO_FN_BS, - GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2, - GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2, - GPIO_FN_TPU0TO1, - GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5, - GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4, - GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1, - GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC, - GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD, - GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC, - GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD, - GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2, - GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6, - GPIO_FN_D0_ED0_NAF0, - GPIO_FN_D1_ED1_NAF1, - GPIO_FN_D2_ED2_NAF2, - GPIO_FN_D3_ED3_NAF3, - GPIO_FN_D4_ED4_NAF4, - GPIO_FN_D5_ED5_NAF5, - GPIO_FN_D6_ED6_NAF6, - GPIO_FN_D7_ED7_NAF7, - GPIO_FN_D8_ED8_NAF8, - GPIO_FN_D9_ED9_NAF9, - GPIO_FN_D10_ED10_NAF10, - GPIO_FN_D11_ED11_NAF11, - GPIO_FN_D12_ED12_NAF12, - GPIO_FN_D13_ED13_NAF13, - GPIO_FN_D14_ED14_NAF14, - GPIO_FN_D15_ED15_NAF15, - GPIO_FN_CS4, - GPIO_FN_CS5A, GPIO_FN_FMSICK, - GPIO_FN_CS5B, GPIO_FN_FCE1, - - /* 55-3 (FN) */ - GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0, - GPIO_FN_FCE0, - GPIO_FN_WAIT, GPIO_FN_DREQ0, - GPIO_FN_RD_XRD, - GPIO_FN_WE0_XWR0_FWE, - GPIO_FN_WE1_XWR1, - GPIO_FN_FRB, - GPIO_FN_CKO, - GPIO_FN_NBRSTOUT, - GPIO_FN_NBRST, - GPIO_FN_GPS_EPPSIN, - GPIO_FN_LATCHPULSE, - GPIO_FN_LTESIGNAL, - GPIO_FN_LEGACYSTATE, - GPIO_FN_TCKON, - GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0, - GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1, - GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD, - GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1, - GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2, - GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC, - GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD, - GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK, - GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2, - GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3, - GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC, - GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR, - GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2, - GPIO_FN_PORT140_FSIAOBT, - GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3, - GPIO_FN_PORT141_FSIAOSLD, - GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK, - GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR, - GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT, - GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD, - GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2, - GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5, - GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6, - GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1, - GPIO_FN_MFG0_IN2, - GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK, - GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC, - GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1, - GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0, - GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2, - GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD, - - /* 55-4 (FN) */ - GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, - GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI, - GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0, - GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0, - GPIO_FN_MFG3_IN2, - GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0, - GPIO_FN_MFG3_IN1, - GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0, - GPIO_FN_MFG3_OUT1, - GPIO_FN_TPU3TO0, - GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI, - GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS, - GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS, - GPIO_FN_BBIF2_TSCK1, - GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD, - GPIO_FN_BBIF2_TXD1, - GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD, - GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK, - GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1, - GPIO_FN_LCDD6, GPIO_FN_XWR2, - GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3, - GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16, - GPIO_FN_ED16, - GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17, - GPIO_FN_ED17, - GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18, - GPIO_FN_ED18, - GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19, - GPIO_FN_ED19, - GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20, - GPIO_FN_ED20, - GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21, - GPIO_FN_ED21, - GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22, - GPIO_FN_ED22, - GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0, - GPIO_FN_VIO_DR7, - GPIO_FN_D23, GPIO_FN_ED23, - GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1, - GPIO_FN_VIO_VDR, - GPIO_FN_D24, GPIO_FN_ED24, - GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25, - GPIO_FN_ED25, - GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26, - GPIO_FN_ED26, - GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27, - GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28, - GPIO_FN_ED28, - GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29, - GPIO_FN_ED29, - GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30, - GPIO_FN_ED30, - GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31, - GPIO_FN_ED31, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3, - GPIO_FN_VIO_CLKR, - GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC, - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3, - GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, - GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5, - GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, - GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, - GPIO_FN_MSIOF0L_TXD, - GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2, - GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM, - GPIO_FN_PORT226_VIO_CKO2, - GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN, - GPIO_FN_SCIFA1_RXD, - GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1, - GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC, - GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR, - GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT, - GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG, - GPIO_FN_PORT233_FSIACK, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD, - GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2, - GPIO_FN_PORT235_FSIAILR, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT, - GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD, - GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3, - - /* 55-5 (FN) */ - GPIO_FN_MSIOF1_SS2, - GPIO_FN_SCIFA6_TXD, - GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, - GPIO_FN_TPU4TO0, - GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2, - GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2, - GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS, - GPIO_FN_PORT244_MSIOF2_RXD, - GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS, - GPIO_FN_PORT245_MSIOF2_TXD, - GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, - GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0, - GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, - GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1, - GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, - GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, - GPIO_FN_PORT248_MSIOF2_TSCK, - GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC, - GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0, - GPIO_FN_SDHICD0, - GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0, - GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0, - GPIO_FN_SDHID0_2, GPIO_FN_TDI2, - GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0, - GPIO_FN_SDHICMD0, GPIO_FN_TRST2, - GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2, - GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1, - GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2, - GPIO_FN_TMS3_SWDIO_MC1, - GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2, - GPIO_FN_TDO3_SWO0_MC1, - GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3, - GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2, - GPIO_FN_RTCK3_SWO1_MC1, - GPIO_FN_SDHICMD1, GPIO_FN_TRST3, - GPIO_FN_RESETOUTS, -}; - -#endif /* __ASM_SH7377_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c deleted file mode 100644 index 5bf776495b75..000000000000 --- a/arch/arm/mach-shmobile/intc-sh7367.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * sh7367 processor support - INTC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/sh_intc.h> -#include <mach/intc.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -enum { - UNUSED_INTCA = 0, - ENABLED, - DISABLED, - - /* interrupt sources INTCA */ - DIRC, - CRYPT1_ERR, CRYPT2_STD, - IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, - ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX, - ETM11_ACQCMP, ETM11_FULL, - MFI_MFIM, MFI_MFIS, - BBIF1, BBIF2, - USBDMAC_USHDMI, - USBHS_USHI0, USBHS_USHI1, - CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, - KEYSC_KEY, - SCIFA0, SCIFA1, SCIFA2, SCIFA3, - MSIOF2, MSIOF1, - SCIFA4, SCIFA5, SCIFB, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0, - SDHI1, - MSU_MSU, MSU_MSU2, - IREM, - SIU, - SPU, - IRDA, - TPU0, TPU1, TPU2, TPU3, TPU4, - LCRC, - PINT1, PINT2, - TTI20, - MISTY, - DDM, - SDHI2, - RWDT0, RWDT1, - DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3, - DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, - - /* interrupt groups INTCA */ - DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, - ETM11, ARM11, USBHS, FLCTL, IIC1 -}; - -static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(DIRC, 0x0560), - INTC_VECT(CRYPT1_ERR, 0x05e0), - INTC_VECT(CRYPT2_STD, 0x0700), - INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), - INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), - INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840), - INTC_VECT(ARM11_COMMRX, 0x0860), - INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0), - INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), - INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), - INTC_VECT(USBDMAC_USHDMI, 0x0a00), - INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40), - INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), - INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), - INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), - INTC_VECT(KEYSC_KEY, 0x0be0), - INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), - INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), - INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), - INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), - INTC_VECT(SCIFB, 0x0d60), - INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), - INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), - INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20), - INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60), - INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0), - INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0), - INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40), - INTC_VECT(IREM, 0x0f60), - INTC_VECT(SIU, 0x0fa0), - INTC_VECT(SPU, 0x0fc0), - INTC_VECT(IRDA, 0x0480), - INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0), - INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500), - INTC_VECT(TPU4, 0x0520), - INTC_VECT(LCRC, 0x0540), - INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020), - INTC_VECT(TTI20, 0x1100), - INTC_VECT(MISTY, 0x1120), - INTC_VECT(DDM, 0x1140), - INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220), - INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260), - INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0), - INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020), - INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060), - INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0), - INTC_VECT(DMAC_2_DADERR, 0x20c0), - INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), - INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), - INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), - INTC_VECT(DMAC2_2_DADERR, 0x21c0), - INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), - INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), - INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), - INTC_VECT(DMAC3_2_DADERR, 0x22c0), -}; - -static struct intc_group intca_groups[] __initdata = { - INTC_GROUP(DMAC_1, DMAC_1_DEI0, - DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3), - INTC_GROUP(DMAC_2, DMAC_2_DEI4, - DMAC_2_DEI5, DMAC_2_DADERR), - INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, - DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), - INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, - DMAC2_2_DEI5, DMAC2_2_DADERR), - INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, - DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), - INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, - DMAC3_2_DEI5, DMAC3_2_DADERR), - INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL), - INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX), - INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, - FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), - INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), -}; - -static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ - { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, - ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } }, - { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ - { CRYPT1_ERR, CRYPT2_STD, DIRC, 0, - DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } }, - { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ - { PINT1, PINT2, 0, 0, - BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, - { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ - { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, - DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, - { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ - { DDM, 0, 0, 0, - 0, 0, ETM11_FULL, ETM11_ACQCMP } }, - { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ - { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4, - SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, - { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ - { SCIFB, SCIFA5, SCIFA4, MSIOF1, - 0, 0, MSIOF2, 0 } }, - { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, - { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - TTI20, USBDMAC_USHDMI, SPU, SIU } }, - { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ - { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, - CMT2, USBHS_USHI1, USBHS_USHI0, 0 } }, - { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ - { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, - 0, 0, 0, 0 } }, - { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ - { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, - LCRC, MSU_MSU2, IREM, MSU_MSU } }, - { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ - { 0, 0, TPU0, TPU1, - TPU2, TPU3, TPU4, 0 } }, - { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - MISTY, CMT3, RWDT1, RWDT0 } }, -}; - -static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, - { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } }, - { 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD, - CMT1_CMT11, ARM11 } }, - { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2, - CMT1_CMT12, TPU4 } }, - { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS, - MFI_MFIM, USBHS } }, - { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2, - 0, CMT1_CMT10 } }, - { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, - SCIFA2, SCIFA3 } }, - { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI, - FLCTL, SDHI0 } }, - { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } }, - { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } }, - { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } }, - { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } }, - { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } }, - { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } }, -}; - -static struct intc_desc intca_desc __initdata = { - .name = "sh7367-intca", - .force_enable = ENABLED, - .force_disable = DISABLED, - .hw = INTC_HW_DESC(intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - NULL, NULL), -}; - -INTC_IRQ_PINS_16(intca_irq_pins, 0xe6900000, - INTC_VECT, "sh7367-intca-irq-pins"); - -enum { - UNUSED_INTCS = 0, - - INTCS, - - /* interrupt sources INTCS */ - VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3, - VIO3_VOU, - RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3, - VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2, - VPU, - SGX530, - _2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3, - IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, - IPMMU_IPMMUB, IPMMU_IPMMUS, - RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR, - MSIOF, - IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, - TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, - CMT, - TSIF, - IPMMUI, - MVI3, - ICB, - PEP, - ASA, - BEM, - VE2HO, - HQE, - JPEG, - LCDC, - - /* interrupt groups INTCS */ - _2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2, -}; - -static struct intc_vect intcs_vectors[] = { - INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720), - INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760), - INTCS_VECT(VIO3_VOU, 0x780), - INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820), - INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860), - INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0), - INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0), - INTCS_VECT(VPU, 0x980), - INTCS_VECT(SGX530, 0x9e0), - INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20), - INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60), - INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), - INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), - INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60), - INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0), - INTCS_VECT(RTDMAC_2_DADERR, 0xbc0), - INTCS_VECT(MSIOF, 0xd20), - INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20), - INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60), - INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0), - INTCS_VECT(TMU_TUNI2, 0xec0), - INTCS_VECT(CMT, 0xf00), - INTCS_VECT(TSIF, 0xf20), - INTCS_VECT(IPMMUI, 0xf60), - INTCS_VECT(MVI3, 0x420), - INTCS_VECT(ICB, 0x480), - INTCS_VECT(PEP, 0x4a0), - INTCS_VECT(ASA, 0x4c0), - INTCS_VECT(BEM, 0x4e0), - INTCS_VECT(VE2HO, 0x520), - INTCS_VECT(HQE, 0x540), - INTCS_VECT(JPEG, 0x560), - INTCS_VECT(LCDC, 0x580), - - INTC_VECT(INTCS, 0xf80), -}; - -static struct intc_group intcs_groups[] __initdata = { - INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1, - _2DDMAC_2DDM2, _2DDMAC_2DDM3), - INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1, - RTDMAC_1_DEI2, RTDMAC_1_DEI3), - INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR), - INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3), - INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2), - INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), - INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB), - INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), -}; - -static struct intc_mask_reg intcs_mask_registers[] = { - { 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */ - { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU, - VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } }, - { 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */ - { VIO3_VOU, 0, VE2HO, VPU, - 0, 0, 0, 0 } }, - { 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */ - { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0, - BEM, ASA, PEP, ICB } }, - { 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */ - { 0, 0, MVI3, 0, - JPEG, HQE, 0, LCDC } }, - { 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */ - { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4, - RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, - { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ - { 0, 0, MSIOF, 0, - SGX530, 0, 0, 0 } }, - { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ - { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, - 0, 0, 0, 0 } }, - { 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */ - { 0, 0, 0, CMT, - IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, - { 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */ - { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0, - 0, 0, 0, 0 } }, - { 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */ - { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, - 0, 0, IPMMUI, TSIF } }, - { 0xffd20104, 0, 16, /* INTAMASK */ - { 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, INTCS } }, -}; - -/* Priority is needed for INTCA to receive the INTCS interrupt */ -static struct intc_prio_reg intcs_prio_registers[] = { - { 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } }, - { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } }, - { 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } }, - { 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } }, - { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } }, - { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1, - TMU_TUNI2, 0 } }, - { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } }, - { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } }, - { 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } }, - { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } }, - { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, -}; - -static struct resource intcs_resources[] __initdata = { - [0] = { - .start = 0xffd20000, - .end = 0xffd2ffff, - .flags = IORESOURCE_MEM, - } -}; - -static struct intc_desc intcs_desc __initdata = { - .name = "sh7367-intcs", - .resource = intcs_resources, - .num_resources = ARRAY_SIZE(intcs_resources), - .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, - intcs_prio_registers, NULL, NULL), -}; - -static void intcs_demux(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *reg = (void *)irq_get_handler_data(irq); - unsigned int evtcodeas = ioread32(reg); - - generic_handle_irq(intcs_evt2irq(evtcodeas)); -} - -void __init sh7367_init_irq(void) -{ - void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - - register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_desc); - register_intc_controller(&intcs_desc); - - /* demux using INTEVTSA */ - irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); - irq_set_chained_handler(evt2irq(0xf80), intcs_demux); -} diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c deleted file mode 100644 index b84a460a3405..000000000000 --- a/arch/arm/mach-shmobile/intc-sh7377.c +++ /dev/null @@ -1,592 +0,0 @@ -/* - * sh7377 processor support - INTC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/sh_intc.h> -#include <mach/intc.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -enum { - UNUSED_INTCA = 0, - ENABLED, - DISABLED, - - /* interrupt sources INTCA */ - DIRC, - _2DG, - CRYPT_STD, - IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1, - AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX, - MFI_MFIM, MFI_MFIS, - BBIF1, BBIF2, - USBDMAC_USHDMI, - USBHS_USHI0, USBHS_USHI1, - _3DG_SGX540, - CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3, - KEYSC_KEY, - SCIFA0, SCIFA1, SCIFA2, SCIFA3, - MSIOF2, MSIOF1, - SCIFA4, SCIFA5, SCIFB, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0, - SDHI1, - MSU_MSU, MSU_MSU2, - IRREM, - MSUG, - IRDA, - TPU0, TPU1, TPU2, TPU3, TPU4, - LCRC, - PINTCA_PINT1, PINTCA_PINT2, - TTI20, - MISTY, - DDM, - RWDT0, RWDT1, - DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3, - DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, - SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, - ICUSB_ICUSB0, ICUSB_ICUSB1, - ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, - SPU2_SPU0, SPU2_SPU1, - FSI, - FMSI, - SCUV, - IPMMU_IPMMUB, - AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ, - MFIS2, - CPORTR2S, - CMT14, CMT15, - SCIFA6, - - /* interrupt groups INTCA */ - DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT, - AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1, - ICUSB, ICUDMC -}; - -static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(DIRC, 0x0560), - INTC_VECT(_2DG, 0x05e0), - INTC_VECT(CRYPT_STD, 0x0700), - INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0), - INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0), - INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840), - INTC_VECT(AP_ARM_COMMRX, 0x0860), - INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920), - INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960), - INTC_VECT(USBDMAC_USHDMI, 0x0a00), - INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40), - INTC_VECT(_3DG_SGX540, 0x0a60), - INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20), - INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60), - INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0), - INTC_VECT(KEYSC_KEY, 0x0be0), - INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20), - INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60), - INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00), - INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40), - INTC_VECT(SCIFB, 0x0d60), - INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), - INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), - INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20), - INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60), - INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0), - INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0), - INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40), - INTC_VECT(IRREM, 0x0f60), - INTC_VECT(MSUG, 0x0fa0), - INTC_VECT(IRDA, 0x0480), - INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0), - INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500), - INTC_VECT(TPU4, 0x0520), - INTC_VECT(LCRC, 0x0540), - INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020), - INTC_VECT(TTI20, 0x1100), - INTC_VECT(MISTY, 0x1120), - INTC_VECT(DDM, 0x1140), - INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0), - INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020), - INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060), - INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0), - INTC_VECT(DMAC_2_DADERR, 0x20c0), - INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120), - INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160), - INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0), - INTC_VECT(DMAC2_2_DADERR, 0x21c0), - INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220), - INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260), - INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0), - INTC_VECT(DMAC3_2_DADERR, 0x22c0), - INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20), - INTC_VECT(SHWYSTAT_COM, 0x1340), - INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720), - INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0), - INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820), - INTC_VECT(FSI, 0x1840), - INTC_VECT(FMSI, 0x1860), - INTC_VECT(SCUV, 0x1880), - INTC_VECT(IPMMU_IPMMUB, 0x1900), - INTC_VECT(AP_ARM_CTIIRQ, 0x1980), - INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0), - INTC_VECT(AP_ARM_DMAIRQ, 0x19c0), - INTC_VECT(AP_ARM_DMASIRQ, 0x19e0), - INTC_VECT(MFIS2, 0x1a00), - INTC_VECT(CPORTR2S, 0x1a20), - INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60), - INTC_VECT(SCIFA6, 0x1a80), -}; - -static struct intc_group intca_groups[] __initdata = { - INTC_GROUP(DMAC_1, DMAC_1_DEI0, - DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3), - INTC_GROUP(DMAC_2, DMAC_2_DEI4, - DMAC_2_DEI5, DMAC_2_DADERR), - INTC_GROUP(DMAC2_1, DMAC2_1_DEI0, - DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), - INTC_GROUP(DMAC2_2, DMAC2_2_DEI4, - DMAC2_2_DEI5, DMAC2_2_DADERR), - INTC_GROUP(DMAC3_1, DMAC3_1_DEI0, - DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), - INTC_GROUP(DMAC3_2, DMAC3_2_DEI4, - DMAC3_2_DEI5, DMAC3_2_DADERR), - INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX), - INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1), - INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, - FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), - INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), - INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM), - INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1), - INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2), -}; - -static struct intc_mask_reg intca_mask_registers[] __initdata = { - { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */ - { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, - AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, - { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */ - { _2DG, CRYPT_STD, DIRC, 0, - DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } }, - { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */ - { PINTCA_PINT1, PINTCA_PINT2, 0, 0, - BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } }, - { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */ - { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, - DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, - { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */ - { DDM, 0, 0, 0, - 0, 0, 0, 0 } }, - { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */ - { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4, - SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, - { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */ - { SCIFB, SCIFA5, SCIFA4, MSIOF1, - 0, 0, MSIOF2, 0 } }, - { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, - { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ - { DISABLED, ENABLED, ENABLED, ENABLED, - TTI20, USBDMAC_USHDMI, 0, MSUG } }, - { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ - { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, - CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } }, - { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */ - { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, - 0, 0, 0, 0 } }, - { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */ - { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1, - LCRC, MSU_MSU2, IRREM, MSU_MSU } }, - { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */ - { 0, 0, TPU0, TPU1, - TPU2, TPU3, TPU4, 0 } }, - { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ - { 0, 0, 0, 0, - MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */ - { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0, - 0, 0, 0, 0 } }, - { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */ - { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0, - ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } }, - { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */ - { SPU2_SPU0, SPU2_SPU1, FSI, FMSI, - SCUV, 0, 0, 0 } }, - { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */ - { IPMMU_IPMMUB, 0, 0, 0, - AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, - AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } }, - { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */ - { MFIS2, CPORTR2S, CMT14, CMT15, - SCIFA6, 0, 0, 0 } }, -}; - -static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } }, - { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, - { 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD, - CMT1_CMT11, AP_ARM1 } }, - { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2, - CMT1_CMT12, TPU4 } }, - { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS, - MFI_MFIM, USBHS } }, - { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2, - _3DG_SGX540, CMT1_CMT10 } }, - { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, - SCIFA2, SCIFA3 } }, - { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI, - FLCTL, SDHI0 } }, - { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } }, - { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } }, - { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } }, - { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } }, - { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } }, - { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } }, - { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } }, - { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } }, - { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } }, - { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } }, - { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, - { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } }, - { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } }, - { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, - { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, - CMT14, CMT15 } }, - { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } }, -}; - -static struct intc_desc intca_desc __initdata = { - .name = "sh7377-intca", - .force_enable = ENABLED, - .force_disable = DISABLED, - .hw = INTC_HW_DESC(intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - NULL, NULL), -}; - -INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, - INTC_VECT, "sh7377-intca-irq-pins"); - -/* this macro ignore entry which is also in INTCA */ -#define __IGNORE(a...) -#define __IGNORE0(a...) 0 - -enum { - UNUSED_INTCS = 0, - - INTCS, - - /* interrupt sources INTCS */ - VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3, - RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, RTDMAC1_1_DEI2, RTDMAC1_1_DEI3, - CEU, - BEU_BEU0, BEU_BEU1, BEU_BEU2, - __IGNORE(MFI) - __IGNORE(BBIF2) - VPU, - TSIF1, - __IGNORE(SGX540) - _2DDMAC, - IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, - IPMMU_IPMMUR, IPMMU_IPMMUR2, - RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR, - __IGNORE(KEYSC) - __IGNORE(TTI20) - __IGNORE(MSIOF) - IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0, - TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, - CMT0, - TSIF0, - __IGNORE(CMT2) - LMB, - __IGNORE(MSUG) - __IGNORE(MSU_MSU, MSU_MSU2) - __IGNORE(CTI) - MVI3, - __IGNORE(RWDT0) - __IGNORE(RWDT1) - ICB, - PEP, - ASA, - __IGNORE(_2DG) - HQE, - JPU, - LCDC0, - __IGNORE(LCRC) - RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, - RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, - FRC, - LCDC1, - CSIRX, - DSITX_DSITX0, DSITX_DSITX1, - __IGNORE(SPU2_SPU0, SPU2_SPU1) - __IGNORE(FSI) - __IGNORE(FMSI) - __IGNORE(SCUV) - TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, - TSIF2, - CMT4, - __IGNORE(MFIS2) - CPORTS2R, - - /* interrupt groups INTCS */ - RTDMAC1_1, RTDMAC1_2, VEU, BEU, IIC0, __IGNORE(MSU) IPMMU, - IIC2, RTDMAC2_1, RTDMAC2_2, DSITX, __IGNORE(SPU2) TMU1, -}; - -#define INTCS_INTVECT 0x0F80 -static struct intc_vect intcs_vectors[] __initdata = { - INTCS_VECT(VEU_VEU0, 0x0700), INTCS_VECT(VEU_VEU1, 0x0720), - INTCS_VECT(VEU_VEU2, 0x0740), INTCS_VECT(VEU_VEU3, 0x0760), - INTCS_VECT(RTDMAC1_1_DEI0, 0x0800), INTCS_VECT(RTDMAC1_1_DEI1, 0x0820), - INTCS_VECT(RTDMAC1_1_DEI2, 0x0840), INTCS_VECT(RTDMAC1_1_DEI3, 0x0860), - INTCS_VECT(CEU, 0x0880), - INTCS_VECT(BEU_BEU0, 0x08A0), - INTCS_VECT(BEU_BEU1, 0x08C0), - INTCS_VECT(BEU_BEU2, 0x08E0), - __IGNORE(INTCS_VECT(MFI, 0x0900)) - __IGNORE(INTCS_VECT(BBIF2, 0x0960)) - INTCS_VECT(VPU, 0x0980), - INTCS_VECT(TSIF1, 0x09A0), - __IGNORE(INTCS_VECT(SGX540, 0x09E0)) - INTCS_VECT(_2DDMAC, 0x0A00), - INTCS_VECT(IIC2_ALI2, 0x0A80), INTCS_VECT(IIC2_TACKI2, 0x0AA0), - INTCS_VECT(IIC2_WAITI2, 0x0AC0), INTCS_VECT(IIC2_DTEI2, 0x0AE0), - INTCS_VECT(IPMMU_IPMMUR, 0x0B00), INTCS_VECT(IPMMU_IPMMUR2, 0x0B20), - INTCS_VECT(RTDMAC1_2_DEI4, 0x0B80), - INTCS_VECT(RTDMAC1_2_DEI5, 0x0BA0), - INTCS_VECT(RTDMAC1_2_DADERR, 0x0BC0), - __IGNORE(INTCS_VECT(KEYSC 0x0BE0)) - __IGNORE(INTCS_VECT(TTI20, 0x0C80)) - __IGNORE(INTCS_VECT(MSIOF, 0x0D20)) - INTCS_VECT(IIC0_ALI0, 0x0E00), INTCS_VECT(IIC0_TACKI0, 0x0E20), - INTCS_VECT(IIC0_WAITI0, 0x0E40), INTCS_VECT(IIC0_DTEI0, 0x0E60), - INTCS_VECT(TMU_TUNI0, 0x0E80), - INTCS_VECT(TMU_TUNI1, 0x0EA0), - INTCS_VECT(TMU_TUNI2, 0x0EC0), - INTCS_VECT(CMT0, 0x0F00), - INTCS_VECT(TSIF0, 0x0F20), - __IGNORE(INTCS_VECT(CMT2, 0x0F40)) - INTCS_VECT(LMB, 0x0F60), - __IGNORE(INTCS_VECT(MSUG, 0x0F80)) - __IGNORE(INTCS_VECT(MSU_MSU, 0x0FA0)) - __IGNORE(INTCS_VECT(MSU_MSU2, 0x0FC0)) - __IGNORE(INTCS_VECT(CTI, 0x0400)) - INTCS_VECT(MVI3, 0x0420), - __IGNORE(INTCS_VECT(RWDT0, 0x0440)) - __IGNORE(INTCS_VECT(RWDT1, 0x0460)) - INTCS_VECT(ICB, 0x0480), - INTCS_VECT(PEP, 0x04A0), - INTCS_VECT(ASA, 0x04C0), - __IGNORE(INTCS_VECT(_2DG, 0x04E0)) - INTCS_VECT(HQE, 0x0540), - INTCS_VECT(JPU, 0x0560), - INTCS_VECT(LCDC0, 0x0580), - __IGNORE(INTCS_VECT(LCRC, 0x05A0)) - INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320), - INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360), - INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13A0), - INTCS_VECT(RTDMAC2_2_DADERR, 0x13C0), - INTCS_VECT(FRC, 0x1700), - INTCS_VECT(LCDC1, 0x1780), - INTCS_VECT(CSIRX, 0x17A0), - INTCS_VECT(DSITX_DSITX0, 0x17C0), INTCS_VECT(DSITX_DSITX1, 0x17E0), - __IGNORE(INTCS_VECT(SPU2_SPU0, 0x1800)) - __IGNORE(INTCS_VECT(SPU2_SPU1, 0x1820)) - __IGNORE(INTCS_VECT(FSI, 0x1840)) - __IGNORE(INTCS_VECT(FMSI, 0x1860)) - __IGNORE(INTCS_VECT(SCUV, 0x1880)) - INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920), - INTCS_VECT(TMU1_TUNI12, 0x1940), - INTCS_VECT(TSIF2, 0x1960), - INTCS_VECT(CMT4, 0x1980), - __IGNORE(INTCS_VECT(MFIS2, 0x1A00)) - INTCS_VECT(CPORTS2R, 0x1A20), - - INTC_VECT(INTCS, INTCS_INTVECT), -}; - -static struct intc_group intcs_groups[] __initdata = { - INTC_GROUP(RTDMAC1_1, - RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, - RTDMAC1_1_DEI2, RTDMAC1_1_DEI3), - INTC_GROUP(RTDMAC1_2, - RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR), - INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3), - INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2), - INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0), - __IGNORE(INTC_GROUP(MSU, MSU_MSU, MSU_MSU2)) - INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2), - INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2), - INTC_GROUP(RTDMAC2_1, - RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, - RTDMAC2_1_DEI2, RTDMAC2_1_DEI3), - INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR), - INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1), - __IGNORE(INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1)) - INTC_GROUP(TMU1, TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12), -}; - -static struct intc_mask_reg intcs_mask_registers[] __initdata = { - { 0xE6940184, 0xE69401C4, 8, /* IMR1AS / IMCR1AS */ - { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU, - VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } }, - { 0xE6940188, 0xE69401C8, 8, /* IMR2AS / IMCR2AS */ - { 0, 0, 0, VPU, - __IGNORE0(BBIF2), 0, 0, __IGNORE0(MFI) } }, - { 0xE694018C, 0xE69401CC, 8, /* IMR3AS / IMCR3AS */ - { 0, 0, 0, _2DDMAC, - __IGNORE0(_2DG), ASA, PEP, ICB } }, - { 0xE6940190, 0xE69401D0, 8, /* IMR4AS / IMCR4AS */ - { 0, 0, MVI3, __IGNORE0(CTI), - JPU, HQE, __IGNORE0(LCRC), LCDC0 } }, - { 0xE6940194, 0xE69401D4, 8, /* IMR5AS / IMCR5AS */ - { __IGNORE0(KEYSC), RTDMAC1_2_DADERR, RTDMAC1_2_DEI5, RTDMAC1_2_DEI4, - RTDMAC1_1_DEI3, RTDMAC1_1_DEI2, RTDMAC1_1_DEI1, RTDMAC1_1_DEI0 } }, - __IGNORE({ 0xE6940198, 0xE69401D8, 8, /* IMR6AS / IMCR6AS */ - { 0, 0, MSIOF, 0, - SGX540, 0, TTI20, 0 } }) - { 0xE694019C, 0xE69401DC, 8, /* IMR7AS / IMCR7AS */ - { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, - 0, 0, 0, 0 } }, - __IGNORE({ 0xE69401A0, 0xE69401E0, 8, /* IMR8AS / IMCR8AS */ - { 0, 0, 0, 0, - 0, MSU_MSU, MSU_MSU2, MSUG } }) - { 0xE69401A4, 0xE69401E4, 8, /* IMR9AS / IMCR9AS */ - { __IGNORE0(RWDT1), __IGNORE0(RWDT0), __IGNORE0(CMT2), CMT0, - IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } }, - { 0xE69401A8, 0xE69401E8, 8, /* IMR10AS / IMCR10AS */ - { 0, 0, IPMMU_IPMMUR, IPMMU_IPMMUR2, - 0, 0, 0, 0 } }, - { 0xE69401AC, 0xE69401EC, 8, /* IMR11AS / IMCR11AS */ - { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0, - 0, TSIF1, LMB, TSIF0 } }, - { 0xE6950180, 0xE69501C0, 8, /* IMR0AS3 / IMCR0AS3 */ - { RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3, - RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, 0 } }, - { 0xE6950190, 0xE69501D0, 8, /* IMR4AS3 / IMCR4AS3 */ - { FRC, 0, 0, 0, - LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } }, - __IGNORE({ 0xE6950194, 0xE69501D4, 8, /* IMR5AS3 / IMCR5AS3 */ - {SPU2_SPU0, SPU2_SPU1, FSI, FMSI, - SCUV, 0, 0, 0 } }) - { 0xE6950198, 0xE69501D8, 8, /* IMR6AS3 / IMCR6AS3 */ - { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, TSIF2, - CMT4, 0, 0, 0 } }, - { 0xE695019C, 0xE69501DC, 8, /* IMR7AS3 / IMCR7AS3 */ - { __IGNORE0(MFIS2), CPORTS2R, 0, 0, - 0, 0, 0, 0 } }, - { 0xFFD20104, 0, 16, /* INTAMASK */ - { 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, INTCS } } -}; - -static struct intc_prio_reg intcs_prio_registers[] __initdata = { - /* IPRAS */ - { 0xFFD20000, 0, 16, 4, { __IGNORE0(CTI), MVI3, _2DDMAC, ICB } }, - /* IPRBS */ - { 0xFFD20004, 0, 16, 4, { JPU, LCDC0, 0, __IGNORE0(LCRC) } }, - /* IPRCS */ - __IGNORE({ 0xFFD20008, 0, 16, 4, { BBIF2, 0, 0, 0 } }) - /* IPRES */ - { 0xFFD20010, 0, 16, 4, { RTDMAC1_1, CEU, __IGNORE0(MFI), VPU } }, - /* IPRFS */ - { 0xFFD20014, 0, 16, 4, - { __IGNORE0(KEYSC), RTDMAC1_2, __IGNORE0(CMT2), CMT0 } }, - /* IPRGS */ - { 0xFFD20018, 0, 16, 4, { TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, TSIF1 } }, - /* IPRHS */ - { 0xFFD2001C, 0, 16, 4, { __IGNORE0(TTI20), 0, VEU, BEU } }, - /* IPRIS */ - { 0xFFD20020, 0, 16, 4, { 0, __IGNORE0(MSIOF), TSIF0, IIC0 } }, - /* IPRJS */ - __IGNORE({ 0xFFD20024, 0, 16, 4, { 0, SGX540, MSUG, MSU } }) - /* IPRKS */ - { 0xFFD20028, 0, 16, 4, { __IGNORE0(_2DG), ASA, LMB, PEP } }, - /* IPRLS */ - { 0xFFD2002C, 0, 16, 4, { IPMMU, 0, 0, HQE } }, - /* IPRMS */ - { 0xFFD20030, 0, 16, 4, - { IIC2, 0, __IGNORE0(RWDT1), __IGNORE0(RWDT0) } }, - /* IPRAS3 */ - { 0xFFD50000, 0, 16, 4, { RTDMAC2_1, 0, 0, 0 } }, - /* IPRBS3 */ - { 0xFFD50004, 0, 16, 4, { RTDMAC2_2, 0, 0, 0 } }, - /* IPRIS3 */ - { 0xFFD50020, 0, 16, 4, { FRC, 0, 0, 0 } }, - /* IPRJS3 */ - { 0xFFD50024, 0, 16, 4, { LCDC1, CSIRX, DSITX, 0 } }, - /* IPRKS3 */ - __IGNORE({ 0xFFD50028, 0, 16, 4, { SPU2, 0, FSI, FMSI } }) - /* IPRLS3 */ - __IGNORE({ 0xFFD5002C, 0, 16, 4, { SCUV, 0, 0, 0 } }) - /* IPRMS3 */ - { 0xFFD50030, 0, 16, 4, { TMU1, 0, 0, TSIF2 } }, - /* IPRNS3 */ - { 0xFFD50034, 0, 16, 4, { CMT4, 0, 0, 0 } }, - /* IPROS3 */ - { 0xFFD50038, 0, 16, 4, { __IGNORE0(MFIS2), CPORTS2R, 0, 0 } }, -}; - -static struct resource intcs_resources[] __initdata = { - [0] = { - .start = 0xffd20000, - .end = 0xffd500ff, - .flags = IORESOURCE_MEM, - } -}; - -static struct intc_desc intcs_desc __initdata = { - .name = "sh7377-intcs", - .resource = intcs_resources, - .num_resources = ARRAY_SIZE(intcs_resources), - .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, - intcs_mask_registers, intcs_prio_registers, - NULL, NULL), -}; - -static void intcs_demux(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *reg = (void *)irq_get_handler_data(irq); - unsigned int evtcodeas = ioread32(reg); - - generic_handle_irq(intcs_evt2irq(evtcodeas)); -} - -#define INTEVTSA 0xFFD20100 -void __init sh7377_init_irq(void) -{ - void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE); - - register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_desc); - register_intc_controller(&intcs_desc); - - /* demux using INTEVTSA */ - irq_set_handler_data(evt2irq(INTCS_INTVECT), (void *)intevtsa); - irq_set_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux); -} diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index cbc26ba2a0a2..9513234d322b 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -140,7 +140,7 @@ enum { FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10, FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12, FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4, - FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1, + FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1, FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19, /* GPSR5 */ @@ -176,7 +176,7 @@ enum { FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3, FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2, FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C, - FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, + FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, FN_SCIF_CLK, FN_TCLK0_C, /* IPSR1 */ @@ -447,7 +447,7 @@ enum { A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK, BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK, ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK, - PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK, + USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK, SCIF_CLK_MARK, TCLK0_C_MARK, EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK, @@ -658,7 +658,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(A18_MARK, FN_A18), PINMUX_DATA(A19_MARK, FN_A19), - PINMUX_IPSR_DATA(IP0_2_0, PENC2), + PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2), PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0), PINMUX_IPSR_DATA(IP0_2_0, PWM1), PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0), @@ -1456,7 +1456,7 @@ static struct pinmux_gpio pinmux_gpios[] = { GPIO_FN(A19), /* IPSR0 */ - GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0), + GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0), GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2), GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF), GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3), @@ -1865,8 +1865,8 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { GP_4_30_FN, FN_IP8_18, GP_4_29_FN, FN_IP8_17_16, GP_4_28_FN, FN_IP0_2_0, - GP_4_27_FN, FN_PENC1, - GP_4_26_FN, FN_PENC0, + GP_4_27_FN, FN_USB_PENC1, + GP_4_26_FN, FN_USB_PENC0, GP_4_25_FN, FN_IP8_15_12, GP_4_24_FN, FN_IP8_11_8, GP_4_23_FN, FN_IP8_7_4, @@ -1981,7 +1981,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2, FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C, /* IP0_2_0 [3] */ - FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, + FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, FN_SCIF_CLK, FN_TCLK0_C, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32, diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c deleted file mode 100644 index c0c137f39052..000000000000 --- a/arch/arm/mach-shmobile/pfc-sh7367.c +++ /dev/null @@ -1,1727 +0,0 @@ -/* - * sh7367 processor support - PFC hardware block - * - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sh_pfc.h> -#include <mach/sh7367.h> - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ - PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \ - PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \ - PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \ - PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \ - PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx), \ - PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx) - -enum { - PINMUX_RESERVED = 0, - - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */ - PINMUX_DATA_END, - - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */ - PINMUX_INPUT_END, - - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */ - PINMUX_INPUT_PULLUP_END, - - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */ - PINMUX_INPUT_PULLDOWN_END, - - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */ - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */ - - MSELBCR_MSEL2_1, MSELBCR_MSEL2_0, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - /* Special Pull-up / Pull-down Functions */ - PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK, - PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK, - PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK, - PORT58_KEYIN6_PU_MARK, - - /* 49-1 */ - VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK, - CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK, - CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK, - CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK, - CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK, - CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK, - CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK, - RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK, - STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK, - MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK, - XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK, - IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK, - M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK, - XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK, - XCTS1_MARK, SCIFA4_CTS_MARK, - - /* 49-2 */ - HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK, - HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK, - HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK, - HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK, - HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK, - HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK, - HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK, - HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK, - HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK, - HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK, - HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK, - HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK, - HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK, - HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK, - HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK, - HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK, - B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK, - HSU_SDI_MARK, PORT55_KEYIN3_MARK, - HSU_SCO_MARK, PORT56_KEYIN4_MARK, - HSU_DREQ_MARK, PORT57_KEYIN5_MARK, - HSU_DACK_MARK, PORT58_KEYIN6_MARK, - HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK, - HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK, - PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK, - XTALB1L_MARK, - GPS_AGC1_MARK, SCIFA0_RTS_MARK, - GPS_AGC2_MARK, SCIFA0_SCK_MARK, - GPS_AGC3_MARK, SCIFA0_TXD_MARK, - GPS_AGC4_MARK, SCIFA0_RXD_MARK, - GPS_PWRD_MARK, SCIFA0_CTS_MARK, - GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK, - SIUBOMC_MARK, TPU2TO0_MARK, - SIUCKB_MARK, TPU2TO1_MARK, - SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK, - SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK, - SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK, - SIUBILR_MARK, TPU3TO1_MARK, - SIUBIBT_MARK, TPU3TO2_MARK, - SIUBISLD_MARK, TPU3TO3_MARK, - NMI_MARK, TPU4TO0_MARK, - DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK, - IRQ_TMPB_MARK, - PWEN_MARK, MFG1_OUT1_MARK, - OVCN_MARK, MFG1_IN1_MARK, - OVCN2_MARK, MFG1_IN2_MARK, - - /* 49-3 */ - RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK, - USBTERM_MARK, EXTLP_MARK, IDIN_MARK, - SCIFA5_CTS_MARK, MFG0_IN1_MARK, - SCIFA5_RTS_MARK, MFG0_IN2_MARK, - SCIFA5_RXD_MARK, - SCIFA5_TXD_MARK, - SCIFA5_SCK_MARK, MFG0_OUT1_MARK, - A0_EA0_MARK, BS_MARK, - A14_EA14_MARK, PORT102_KEYOUT0_MARK, - A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK, - A16_EA16_MARK, PORT104_KEYOUT2_MARK, - DV_VSYNCL_MARK, MSIOF0_SS1_MARK, - A17_EA17_MARK, PORT105_KEYOUT3_MARK, - DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK, - A18_EA18_MARK, PORT106_KEYOUT4_MARK, - DV_DL0_MARK, MSIOF0_TSCK_MARK, - A19_EA19_MARK, PORT107_KEYOUT5_MARK, - DV_DL1_MARK, MSIOF0_TXD_MARK, - A20_EA20_MARK, PORT108_KEYIN0_MARK, - DV_DL2_MARK, MSIOF0_RSCK_MARK, - A21_EA21_MARK, PORT109_KEYIN1_MARK, - DV_DL3_MARK, MSIOF0_RSYNC_MARK, - A22_EA22_MARK, PORT110_KEYIN2_MARK, - DV_DL4_MARK, MSIOF0_MCK0_MARK, - A23_EA23_MARK, PORT111_KEYIN3_MARK, - DV_DL5_MARK, MSIOF0_MCK1_MARK, - A24_EA24_MARK, PORT112_KEYIN4_MARK, - DV_DL6_MARK, MSIOF0_RXD_MARK, - A25_EA25_MARK, PORT113_KEYIN5_MARK, - DV_DL7_MARK, MSIOF0_SS2_MARK, - A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK, - D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK, - D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK, - D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK, - D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK, - D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK, - D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK, - CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK, - CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK, - DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK, - A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK, - WE1_XWR1_MARK, FRB_MARK, CKO_MARK, - NBRSTOUT_MARK, NBRST_MARK, - - /* 49-4 */ - RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK, - VIO_VD_MARK, VIO_HD_MARK, - VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK, - VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK, - VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK, - VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK, - VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK, - VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK, - VIO_CKO_MARK, - MFG3_IN1_MARK, MFG3_IN2_MARK, - M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK, - M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK, - M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK, - M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK, - LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK, - SIUCKA_MARK, MFG0_OUT2_MARK, - LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK, - SIUAOLR_MARK, BBIF2_TSYNC1_MARK, - LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK, - SIUAOBT_MARK, BBIF2_TSCK1_MARK, - LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK, - SIUAOSLD_MARK, BBIF2_TXD1_MARK, - LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK, - SIUAISPD_MARK, MFG1_OUT2_MARK, - LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK, - SIUAILR_MARK, MFG2_OUT2_MARK, - LCDD6_MARK, DV_D6_MARK, - SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK, - LCDD7_MARK, DV_D7_MARK, - SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK, - LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK, - LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK, - LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK, - LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK, - LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK, - LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK, - LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK, - LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK, - LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK, - LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK, - LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK, - D26_MARK, ED26_MARK, - LCDD19_MARK, MSIOF0L_TSYNC_MARK, - D27_MARK, ED27_MARK, - LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, - D28_MARK, ED28_MARK, - LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, - D29_MARK, ED29_MARK, - LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK, - D30_MARK, ED30_MARK, - LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK, - D31_MARK, ED31_MARK, - LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK, - LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK, - - /* 49-5 */ - LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK, - LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK, - LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK, - LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK, - LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK, - VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK, - VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK, - VIO_VDR_MARK, VIO_HDR_MARK, - VIO_CLKR_MARK, VIO_CKOR_MARK, - SCIFA1_TXD_MARK, GPS_PGFA0_MARK, - SCIFA1_SCK_MARK, GPS_PGFA1_MARK, - SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK, - SCIFA1_RXD_MARK, SCIFA1_CTS_MARK, - MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK, - MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK, - MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK, - MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK, - MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK, - MSIOF1_RSYNC_MARK, I2C_SCL2_MARK, - MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK, - MSIOF1_SS1_MARK, EDBGREQ3_MARK, - MSIOF1_SS2_MARK, - PORT236_IROUT_MARK, IRDA_OUT_MARK, - IRDA_IN_MARK, IRDA_FIRSEL_MARK, - TPU1TO0_MARK, TS_SPSYNC3_MARK, - TPU1TO1_MARK, TS_SDAT3_MARK, - TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK, - TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK, - M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK, - M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK, - PORT245_IROUT_MARK, M15_RSW_MARK, - SOUT3_MARK, SCIFA2_TXD1_MARK, - SIN3_MARK, SCIFA2_RXD1_MARK, - XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK, - XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK, - DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, - SDHICLK0_MARK, TCK2_MARK, - SDHICD0_MARK, - SDHID0_0_MARK, TMS2_MARK, - SDHID0_1_MARK, TDO2_MARK, - SDHID0_2_MARK, TDI2_MARK, - SDHID0_3_MARK, RTCK2_MARK, - - /* 49-6 */ - SDHICMD0_MARK, TRST2_MARK, - SDHIWP0_MARK, EDBGREQ2_MARK, - SDHICLK1_MARK, TCK3_MARK, - SDHID1_0_MARK, M11_SLCD_SO2_MARK, - TS_SPSYNC2_MARK, TMS3_MARK, - SDHID1_1_MARK, M9_SLCD_AO2_MARK, - TS_SDAT2_MARK, TDO3_MARK, - SDHID1_2_MARK, M10_SLCD_CK2_MARK, - TS_SDEN2_MARK, TDI3_MARK, - SDHID1_3_MARK, M12_SLCD_CE2_MARK, - TS_SCK2_MARK, RTCK3_MARK, - SDHICMD1_MARK, TRST3_MARK, - SDHICLK2_MARK, SCIFB_SCK_MARK, - SDHID2_0_MARK, SCIFB_TXD_MARK, - SDHID2_1_MARK, SCIFB_CTS_MARK, - SDHID2_2_MARK, SCIFB_RXD_MARK, - SDHID2_3_MARK, SCIFB_RTS_MARK, - SDHICMD2_MARK, - RESETOUTS_MARK, - DIVLOCK_MARK, - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - - /* specify valid pin states for each pin in GPIO mode */ - - /* 49-1 (GPIO) */ - PORT_DATA_I_PD(0), - PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3), - PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6), - PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9), - PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12), - PORT_DATA_I_PU(13), - PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15), - PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19), - PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23), - PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26), - PORT_DATA_I_PD(27), PORT_DATA_I_PD(28), - PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32), - PORT_DATA_IO_PU(33), - PORT_DATA_O(34), - PORT_DATA_I_PU(35), - PORT_DATA_O(36), - PORT_DATA_I_PU_PD(37), - - /* 49-2 (GPIO) */ - PORT_DATA_IO_PU_PD(38), - PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41), - PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45), - PORT_DATA_O(46), PORT_DATA_O(47), - PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50), - PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52), - PORT_DATA_O(53), - PORT_DATA_IO_PD(54), - PORT_DATA_I_PU_PD(55), - PORT_DATA_IO_PU_PD(56), - PORT_DATA_I_PU_PD(57), - PORT_DATA_IO_PU_PD(58), - PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62), - PORT_DATA_O(63), - PORT_DATA_I_PU(64), - PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68), - PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70), - PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73), - PORT_DATA_I_PD(74), - PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76), - PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78), - PORT_DATA_O(79), - PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82), - PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84), - PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86), - PORT_DATA_I_PD(87), - PORT_DATA_IO_PU_PD(88), - PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90), - - /* 49-3 (GPIO) */ - PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94), - PORT_DATA_I_PU_PD(95), - PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98), - PORT_DATA_IO_PU_PD(99), PORT_DATA_IO_PU_PD(100), - PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103), - PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106), - PORT_DATA_IO_PD(107), - PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109), - PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111), - PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113), - PORT_DATA_IO_PU_PD(114), - PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117), - PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120), - PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123), - PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126), - PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129), - PORT_DATA_IO_PU(130), - PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133), - PORT_DATA_IO_PU(134), - PORT_DATA_O(135), PORT_DATA_O(136), - PORT_DATA_I_PU_PD(137), - PORT_DATA_IO(138), - PORT_DATA_IO_PU_PD(139), - PORT_DATA_IO(140), PORT_DATA_IO(141), - PORT_DATA_I_PU(142), - PORT_DATA_O(143), PORT_DATA_O(144), - PORT_DATA_I_PU(145), - - /* 49-4 (GPIO) */ - PORT_DATA_O(146), - PORT_DATA_I_PU_PD(147), - PORT_DATA_I_PD(148), PORT_DATA_I_PD(149), - PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152), - PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155), - PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158), - PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161), - PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164), - PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166), - PORT_DATA_IO_PU_PD(167), - PORT_DATA_O(168), - PORT_DATA_I_PD(169), PORT_DATA_I_PD(170), - PORT_DATA_O(171), - PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173), - PORT_DATA_O(174), - PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177), - PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180), - PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183), - PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186), - PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189), - PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192), - PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195), - PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198), - PORT_DATA_O(199), - PORT_DATA_IO_PD(200), - - /* 49-5 (GPIO) */ - PORT_DATA_O(201), - PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203), - PORT_DATA_I(204), - PORT_DATA_O(205), - PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208), - PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), - PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214), - PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216), - PORT_DATA_O(217), - PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219), - PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222), - PORT_DATA_I_PD(223), - PORT_DATA_I_PU_PD(224), - PORT_DATA_O(225), - PORT_DATA_IO_PD(226), - PORT_DATA_IO_PU_PD(227), - PORT_DATA_I_PD(228), - PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230), - PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232), - PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234), - PORT_DATA_I_PU_PD(235), - PORT_DATA_O(236), - PORT_DATA_I_PD(237), - PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239), - PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241), - PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243), - PORT_DATA_O(244), - PORT_DATA_IO_PU_PD(245), - PORT_DATA_O(246), - PORT_DATA_I_PD(247), - PORT_DATA_IO_PU_PD(248), - PORT_DATA_I_PU_PD(249), - PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251), - PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253), - PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255), - PORT_DATA_IO_PU_PD(256), - - /* 49-6 (GPIO) */ - PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258), - PORT_DATA_IO_PD(259), - PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262), - PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264), - PORT_DATA_O(265), - PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268), - PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270), - PORT_DATA_O(271), - PORT_DATA_I_PD(272), - - /* Special Pull-up / Pull-down Functions */ - PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1, - PORT48_FN2, PORT48_IN_PU), - PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1, - PORT49_FN2, PORT49_IN_PU), - PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1, - PORT50_FN2, PORT50_IN_PU), - PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1, - PORT55_FN2, PORT55_IN_PU), - PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1, - PORT56_FN2, PORT56_IN_PU), - PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1, - PORT57_FN2, PORT57_IN_PU), - PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1, - PORT58_FN2, PORT58_IN_PU), - - /* 49-1 (FN) */ - PINMUX_DATA(VBUS0_MARK, PORT0_FN1), - PINMUX_DATA(CPORT0_MARK, PORT1_FN1), - PINMUX_DATA(CPORT1_MARK, PORT2_FN1), - PINMUX_DATA(CPORT2_MARK, PORT3_FN1), - PINMUX_DATA(CPORT3_MARK, PORT4_FN1), - PINMUX_DATA(CPORT4_MARK, PORT5_FN1), - PINMUX_DATA(CPORT5_MARK, PORT6_FN1), - PINMUX_DATA(CPORT6_MARK, PORT7_FN1), - PINMUX_DATA(CPORT7_MARK, PORT8_FN1), - PINMUX_DATA(CPORT8_MARK, PORT9_FN1), - PINMUX_DATA(CPORT9_MARK, PORT10_FN1), - PINMUX_DATA(CPORT10_MARK, PORT11_FN1), - PINMUX_DATA(CPORT11_MARK, PORT12_FN1), - PINMUX_DATA(SIN2_MARK, PORT12_FN2), - PINMUX_DATA(CPORT12_MARK, PORT13_FN1), - PINMUX_DATA(XCTS2_MARK, PORT13_FN2), - PINMUX_DATA(CPORT13_MARK, PORT14_FN1), - PINMUX_DATA(RFSPO4_MARK, PORT14_FN2), - PINMUX_DATA(CPORT14_MARK, PORT15_FN1), - PINMUX_DATA(RFSPO5_MARK, PORT15_FN2), - PINMUX_DATA(CPORT15_MARK, PORT16_FN1), - PINMUX_DATA(CPORT16_MARK, PORT17_FN1), - PINMUX_DATA(CPORT17_MARK, PORT18_FN1), - PINMUX_DATA(SOUT2_MARK, PORT18_FN2), - PINMUX_DATA(CPORT18_MARK, PORT19_FN1), - PINMUX_DATA(XRTS2_MARK, PORT19_FN1), - PINMUX_DATA(CPORT19_MARK, PORT20_FN1), - PINMUX_DATA(CPORT20_MARK, PORT21_FN1), - PINMUX_DATA(RFSPO6_MARK, PORT21_FN2), - PINMUX_DATA(CPORT21_MARK, PORT22_FN1), - PINMUX_DATA(STATUS0_MARK, PORT22_FN2), - PINMUX_DATA(CPORT22_MARK, PORT23_FN1), - PINMUX_DATA(STATUS1_MARK, PORT23_FN2), - PINMUX_DATA(CPORT23_MARK, PORT24_FN1), - PINMUX_DATA(STATUS2_MARK, PORT24_FN2), - PINMUX_DATA(RFSPO7_MARK, PORT24_FN3), - PINMUX_DATA(MPORT0_MARK, PORT25_FN1), - PINMUX_DATA(MPORT1_MARK, PORT26_FN1), - PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1), - PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1), - PINMUX_DATA(XMAINPS_MARK, PORT29_FN1), - PINMUX_DATA(XDIVPS_MARK, PORT30_FN1), - PINMUX_DATA(XIDRST_MARK, PORT31_FN1), - PINMUX_DATA(IDCLK_MARK, PORT32_FN1), - PINMUX_DATA(IDIO_MARK, PORT33_FN1), - PINMUX_DATA(SOUT1_MARK, PORT34_FN1), - PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2), - PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3), - PINMUX_DATA(SIN1_MARK, PORT35_FN1), - PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2), - PINMUX_DATA(XWUP_MARK, PORT35_FN3), - PINMUX_DATA(XRTS1_MARK, PORT36_FN1), - PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2), - PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3), - PINMUX_DATA(XCTS1_MARK, PORT37_FN1), - PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2), - - /* 49-2 (FN) */ - PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1), - PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2), - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3), - PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1), - PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2), - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3), - PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1), - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3), - PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1), - PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2), - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3), - PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1), - PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2), - PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1), - PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2), - PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1), - PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2), - PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1), - PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2), - PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1), - PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2), - PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1), - PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2), - PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1), - PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2), - PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1), - PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2), - PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1), - PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2), - PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1), - PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2), - PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1), - PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2), - PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1), - PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2), - PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1), - PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2), - PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1), - PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2), - PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1), - PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2), - PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1), - PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2), - PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1), - PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2), - PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1), - PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2), - PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1), - PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2), - PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1), - PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1), - PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1), - PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1), - PINMUX_DATA(XTALB1L_MARK, PORT65_FN1), - PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1), - PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2), - PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1), - PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2), - PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1), - PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2), - PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1), - PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2), - PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1), - PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2), - PINMUX_DATA(GPS_IM_MARK, PORT71_FN1), - PINMUX_DATA(GPS_IS_MARK, PORT72_FN1), - PINMUX_DATA(GPS_QM_MARK, PORT73_FN1), - PINMUX_DATA(GPS_QS_MARK, PORT74_FN1), - PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1), - PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3), - PINMUX_DATA(SIUCKB_MARK, PORT76_FN1), - PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3), - PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1), - PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2), - PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3), - PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1), - PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2), - PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3), - PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1), - PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2), - PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3), - PINMUX_DATA(SIUBILR_MARK, PORT80_FN1), - PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3), - PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1), - PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3), - PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1), - PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3), - PINMUX_DATA(NMI_MARK, PORT83_FN1), - PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3), - PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1), - PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3), - PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3), - PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3), - PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1), - PINMUX_DATA(PWEN_MARK, PORT88_FN1), - PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2), - PINMUX_DATA(OVCN_MARK, PORT89_FN1), - PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2), - PINMUX_DATA(OVCN2_MARK, PORT90_FN1), - PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2), - - /* 49-3 (FN) */ - PINMUX_DATA(RFSPO1_MARK, PORT91_FN1), - PINMUX_DATA(RFSPO2_MARK, PORT92_FN1), - PINMUX_DATA(RFSPO3_MARK, PORT93_FN1), - PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2), - PINMUX_DATA(USBTERM_MARK, PORT94_FN1), - PINMUX_DATA(EXTLP_MARK, PORT94_FN2), - PINMUX_DATA(IDIN_MARK, PORT95_FN1), - PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1), - PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2), - PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1), - PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2), - PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1), - PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1), - PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1), - PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2), - PINMUX_DATA(A0_EA0_MARK, PORT101_FN1), - PINMUX_DATA(BS_MARK, PORT101_FN2), - PINMUX_DATA(A14_EA14_MARK, PORT102_FN1), - PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2), - PINMUX_DATA(A15_EA15_MARK, PORT103_FN1), - PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2), - PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3), - PINMUX_DATA(A16_EA16_MARK, PORT104_FN1), - PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2), - PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3), - PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4), - PINMUX_DATA(A17_EA17_MARK, PORT105_FN1), - PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2), - PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3), - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4), - PINMUX_DATA(A18_EA18_MARK, PORT106_FN1), - PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2), - PINMUX_DATA(DV_DL0_MARK, PORT106_FN3), - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4), - PINMUX_DATA(A19_EA19_MARK, PORT107_FN1), - PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2), - PINMUX_DATA(DV_DL1_MARK, PORT107_FN3), - PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4), - PINMUX_DATA(A20_EA20_MARK, PORT108_FN1), - PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2), - PINMUX_DATA(DV_DL2_MARK, PORT108_FN3), - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4), - PINMUX_DATA(A21_EA21_MARK, PORT109_FN1), - PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2), - PINMUX_DATA(DV_DL3_MARK, PORT109_FN3), - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4), - PINMUX_DATA(A22_EA22_MARK, PORT110_FN1), - PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2), - PINMUX_DATA(DV_DL4_MARK, PORT110_FN3), - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4), - PINMUX_DATA(A23_EA23_MARK, PORT111_FN1), - PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2), - PINMUX_DATA(DV_DL5_MARK, PORT111_FN3), - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4), - PINMUX_DATA(A24_EA24_MARK, PORT112_FN1), - PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2), - PINMUX_DATA(DV_DL6_MARK, PORT112_FN3), - PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4), - PINMUX_DATA(A25_EA25_MARK, PORT113_FN1), - PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2), - PINMUX_DATA(DV_DL7_MARK, PORT113_FN3), - PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4), - PINMUX_DATA(A26_MARK, PORT114_FN1), - PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2), - PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3), - PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1), - PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1), - PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1), - PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1), - PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1), - PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1), - PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1), - PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1), - PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1), - PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1), - PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1), - PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1), - PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1), - PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1), - PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1), - PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1), - PINMUX_DATA(CS4_MARK, PORT131_FN1), - PINMUX_DATA(CS5A_MARK, PORT132_FN1), - PINMUX_DATA(CS5B_MARK, PORT133_FN1), - PINMUX_DATA(FCE1_MARK, PORT133_FN2), - PINMUX_DATA(CS6B_MARK, PORT134_FN1), - PINMUX_DATA(XCS2_MARK, PORT134_FN2), - PINMUX_DATA(FCE0_MARK, PORT135_FN1), - PINMUX_DATA(CS6A_MARK, PORT136_FN1), - PINMUX_DATA(DACK0_MARK, PORT136_FN2), - PINMUX_DATA(WAIT_MARK, PORT137_FN1), - PINMUX_DATA(DREQ0_MARK, PORT137_FN2), - PINMUX_DATA(RD_XRD_MARK, PORT138_FN1), - PINMUX_DATA(A27_MARK, PORT139_FN1), - PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2), - PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1), - PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1), - PINMUX_DATA(FRB_MARK, PORT142_FN1), - PINMUX_DATA(CKO_MARK, PORT143_FN1), - PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1), - PINMUX_DATA(NBRST_MARK, PORT145_FN1), - - /* 49-4 (FN) */ - PINMUX_DATA(RFSPO0_MARK, PORT146_FN1), - PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2), - PINMUX_DATA(TSTMD_MARK, PORT147_FN1), - PINMUX_DATA(VIO_VD_MARK, PORT148_FN1), - PINMUX_DATA(VIO_HD_MARK, PORT149_FN1), - PINMUX_DATA(VIO_D0_MARK, PORT150_FN1), - PINMUX_DATA(VIO_D1_MARK, PORT151_FN1), - PINMUX_DATA(VIO_D2_MARK, PORT152_FN1), - PINMUX_DATA(VIO_D3_MARK, PORT153_FN1), - PINMUX_DATA(VIO_D4_MARK, PORT154_FN1), - PINMUX_DATA(VIO_D5_MARK, PORT155_FN1), - PINMUX_DATA(VIO_D6_MARK, PORT156_FN1), - PINMUX_DATA(VIO_D7_MARK, PORT157_FN1), - PINMUX_DATA(VIO_D8_MARK, PORT158_FN1), - PINMUX_DATA(VIO_D9_MARK, PORT159_FN1), - PINMUX_DATA(VIO_D10_MARK, PORT160_FN1), - PINMUX_DATA(VIO_D11_MARK, PORT161_FN1), - PINMUX_DATA(VIO_D12_MARK, PORT162_FN1), - PINMUX_DATA(VIO_D13_MARK, PORT163_FN1), - PINMUX_DATA(VIO_D14_MARK, PORT164_FN1), - PINMUX_DATA(VIO_D15_MARK, PORT165_FN1), - PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1), - PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1), - PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1), - PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2), - PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2), - PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1), - PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2), - PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3), - PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1), - PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2), - PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3), - PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1), - PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2), - PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3), - PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1), - PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2), - PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3), - PINMUX_DATA(LCDD0_MARK, PORT175_FN1), - PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2), - PINMUX_DATA(DV_D0_MARK, PORT175_FN3), - PINMUX_DATA(SIUCKA_MARK, PORT175_FN4), - PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5), - PINMUX_DATA(LCDD1_MARK, PORT176_FN1), - PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2), - PINMUX_DATA(DV_D1_MARK, PORT176_FN3), - PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4), - PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5), - PINMUX_DATA(LCDD2_MARK, PORT177_FN1), - PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2), - PINMUX_DATA(DV_D2_MARK, PORT177_FN3), - PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4), - PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5), - PINMUX_DATA(LCDD3_MARK, PORT178_FN1), - PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2), - PINMUX_DATA(DV_D3_MARK, PORT178_FN3), - PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4), - PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5), - PINMUX_DATA(LCDD4_MARK, PORT179_FN1), - PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2), - PINMUX_DATA(DV_D4_MARK, PORT179_FN3), - PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4), - PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5), - PINMUX_DATA(LCDD5_MARK, PORT180_FN1), - PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2), - PINMUX_DATA(DV_D5_MARK, PORT180_FN3), - PINMUX_DATA(SIUAILR_MARK, PORT180_FN4), - PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5), - PINMUX_DATA(LCDD6_MARK, PORT181_FN1), - PINMUX_DATA(DV_D6_MARK, PORT181_FN3), - PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4), - PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5), - PINMUX_DATA(XWR2_MARK, PORT181_FN7), - PINMUX_DATA(LCDD7_MARK, PORT182_FN1), - PINMUX_DATA(DV_D7_MARK, PORT182_FN3), - PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4), - PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5), - PINMUX_DATA(XWR3_MARK, PORT182_FN7), - PINMUX_DATA(LCDD8_MARK, PORT183_FN1), - PINMUX_DATA(DV_D8_MARK, PORT183_FN3), - PINMUX_DATA(D16_MARK, PORT183_FN6), - PINMUX_DATA(ED16_MARK, PORT183_FN7), - PINMUX_DATA(LCDD9_MARK, PORT184_FN1), - PINMUX_DATA(DV_D9_MARK, PORT184_FN3), - PINMUX_DATA(D17_MARK, PORT184_FN6), - PINMUX_DATA(ED17_MARK, PORT184_FN7), - PINMUX_DATA(LCDD10_MARK, PORT185_FN1), - PINMUX_DATA(DV_D10_MARK, PORT185_FN3), - PINMUX_DATA(D18_MARK, PORT185_FN6), - PINMUX_DATA(ED18_MARK, PORT185_FN7), - PINMUX_DATA(LCDD11_MARK, PORT186_FN1), - PINMUX_DATA(DV_D11_MARK, PORT186_FN3), - PINMUX_DATA(D19_MARK, PORT186_FN6), - PINMUX_DATA(ED19_MARK, PORT186_FN7), - PINMUX_DATA(LCDD12_MARK, PORT187_FN1), - PINMUX_DATA(DV_D12_MARK, PORT187_FN3), - PINMUX_DATA(D20_MARK, PORT187_FN6), - PINMUX_DATA(ED20_MARK, PORT187_FN7), - PINMUX_DATA(LCDD13_MARK, PORT188_FN1), - PINMUX_DATA(DV_D13_MARK, PORT188_FN3), - PINMUX_DATA(D21_MARK, PORT188_FN6), - PINMUX_DATA(ED21_MARK, PORT188_FN7), - PINMUX_DATA(LCDD14_MARK, PORT189_FN1), - PINMUX_DATA(DV_D14_MARK, PORT189_FN3), - PINMUX_DATA(D22_MARK, PORT189_FN6), - PINMUX_DATA(ED22_MARK, PORT189_FN7), - PINMUX_DATA(LCDD15_MARK, PORT190_FN1), - PINMUX_DATA(DV_D15_MARK, PORT190_FN3), - PINMUX_DATA(D23_MARK, PORT190_FN6), - PINMUX_DATA(ED23_MARK, PORT190_FN7), - PINMUX_DATA(LCDD16_MARK, PORT191_FN1), - PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3), - PINMUX_DATA(D24_MARK, PORT191_FN6), - PINMUX_DATA(ED24_MARK, PORT191_FN7), - PINMUX_DATA(LCDD17_MARK, PORT192_FN1), - PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3), - PINMUX_DATA(D25_MARK, PORT192_FN6), - PINMUX_DATA(ED25_MARK, PORT192_FN7), - PINMUX_DATA(LCDD18_MARK, PORT193_FN1), - PINMUX_DATA(DREQ2_MARK, PORT193_FN2), - PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5), - PINMUX_DATA(D26_MARK, PORT193_FN6), - PINMUX_DATA(ED26_MARK, PORT193_FN7), - PINMUX_DATA(LCDD19_MARK, PORT194_FN1), - PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5), - PINMUX_DATA(D27_MARK, PORT194_FN6), - PINMUX_DATA(ED27_MARK, PORT194_FN7), - PINMUX_DATA(LCDD20_MARK, PORT195_FN1), - PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2), - PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5), - PINMUX_DATA(D28_MARK, PORT195_FN6), - PINMUX_DATA(ED28_MARK, PORT195_FN7), - PINMUX_DATA(LCDD21_MARK, PORT196_FN1), - PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2), - PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5), - PINMUX_DATA(D29_MARK, PORT196_FN6), - PINMUX_DATA(ED29_MARK, PORT196_FN7), - PINMUX_DATA(LCDD22_MARK, PORT197_FN1), - PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2), - PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5), - PINMUX_DATA(D30_MARK, PORT197_FN6), - PINMUX_DATA(ED30_MARK, PORT197_FN7), - PINMUX_DATA(LCDD23_MARK, PORT198_FN1), - PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2), - PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5), - PINMUX_DATA(D31_MARK, PORT198_FN6), - PINMUX_DATA(ED31_MARK, PORT198_FN7), - PINMUX_DATA(LCDDCK_MARK, PORT199_FN1), - PINMUX_DATA(LCDWR_MARK, PORT199_FN2), - PINMUX_DATA(DV_CKO_MARK, PORT199_FN3), - PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4), - PINMUX_DATA(LCDRD_MARK, PORT200_FN1), - PINMUX_DATA(DACK2_MARK, PORT200_FN2), - PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5), - - /* 49-5 (FN) */ - PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1), - PINMUX_DATA(LCDCS_MARK, PORT201_FN2), - PINMUX_DATA(LCDCS2_MARK, PORT201_FN3), - PINMUX_DATA(DACK3_MARK, PORT201_FN4), - PINMUX_DATA(LCDDISP_MARK, PORT202_FN1), - PINMUX_DATA(LCDRS_MARK, PORT202_FN2), - PINMUX_DATA(DREQ3_MARK, PORT202_FN4), - PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5), - PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1), - PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2), - PINMUX_DATA(DV_CKI_MARK, PORT203_FN3), - PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1), - PINMUX_DATA(DREQ1_MARK, PORT204_FN3), - PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5), - PINMUX_DATA(LCDDON_MARK, PORT205_FN1), - PINMUX_DATA(LCDDON2_MARK, PORT205_FN2), - PINMUX_DATA(DACK1_MARK, PORT205_FN3), - PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5), - PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1), - PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1), - PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1), - PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1), - PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1), - PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1), - PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1), - PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1), - PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1), - PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1), - PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1), - PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1), - PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2), - PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3), - PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2), - PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3), - PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2), - PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3), - PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2), - PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2), - PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1), - PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2), - PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3), - PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1), - PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2), - PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3), - PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1), - PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2), - PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1), - PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2), - PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1), - PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1), - PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1), - PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1), - PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2), - PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1), - PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1), - PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2), - PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2), - PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1), - PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3), - PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4), - PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3), - PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4), - PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3), - PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4), - PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5), - PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3), - PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5), - PINMUX_DATA(M13_BSW_MARK, PORT243_FN2), - PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5), - PINMUX_DATA(M14_GSW_MARK, PORT244_FN2), - PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5), - PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1), - PINMUX_DATA(M15_RSW_MARK, PORT245_FN2), - PINMUX_DATA(SOUT3_MARK, PORT246_FN1), - PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2), - PINMUX_DATA(SIN3_MARK, PORT247_FN1), - PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2), - PINMUX_DATA(XRTS3_MARK, PORT248_FN1), - PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2), - PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5), - PINMUX_DATA(XCTS3_MARK, PORT249_FN1), - PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2), - PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5), - PINMUX_DATA(DINT_MARK, PORT250_FN1), - PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2), - PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4), - PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1), - PINMUX_DATA(TCK2_MARK, PORT251_FN2), - PINMUX_DATA(SDHICD0_MARK, PORT252_FN1), - PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1), - PINMUX_DATA(TMS2_MARK, PORT253_FN2), - PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1), - PINMUX_DATA(TDO2_MARK, PORT254_FN2), - PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1), - PINMUX_DATA(TDI2_MARK, PORT255_FN2), - PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1), - PINMUX_DATA(RTCK2_MARK, PORT256_FN2), - - /* 49-6 (FN) */ - PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1), - PINMUX_DATA(TRST2_MARK, PORT257_FN2), - PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1), - PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2), - PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1), - PINMUX_DATA(TCK3_MARK, PORT259_FN4), - PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1), - PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2), - PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3), - PINMUX_DATA(TMS3_MARK, PORT260_FN4), - PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1), - PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2), - PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3), - PINMUX_DATA(TDO3_MARK, PORT261_FN4), - PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1), - PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2), - PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3), - PINMUX_DATA(TDI3_MARK, PORT262_FN4), - PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1), - PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2), - PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3), - PINMUX_DATA(RTCK3_MARK, PORT263_FN4), - PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1), - PINMUX_DATA(TRST3_MARK, PORT264_FN4), - PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1), - PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2), - PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1), - PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2), - PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1), - PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2), - PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1), - PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2), - PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1), - PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2), - PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1), - PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1), - PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - /* 49-1 -> 49-6 (GPIO) */ - GPIO_PORT_ALL(), - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU), - GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU), - GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU), - GPIO_FN(PORT58_KEYIN6_PU), - - /* 49-1 (FN) */ - GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2), - GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6), - GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10), - GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2), - GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5), - GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2), - GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20), - GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22), - GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7), - GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2), - GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK), - GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), - GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP), - GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK), - GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS), - - /* 49-2 (FN) */ - GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0), - GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1), - GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK), - GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0), - GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1), - GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2), - GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3), - GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4), - GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5), - GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0), - GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1), - GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2), - GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC), - GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK), - GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD), - GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD), - GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3), - GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4), - GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5), - GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6), - GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1), - GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2), - GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A), - GPIO_FN(XTALB1L), - GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS), - GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK), - GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD), - GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD), - GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS), - GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS), - GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0), - GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1), - GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2), - GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3), - GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0), - GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1), - GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2), - GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3), - GPIO_FN(NMI), GPIO_FN(TPU4TO0), - GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3), - GPIO_FN(IRQ_TMPB), - GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1), - GPIO_FN(OVCN), GPIO_FN(MFG1_IN1), - GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2), - - /* 49-3 (FN) */ - GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3), - GPIO_FN(PORT93_VIO_CKO2), - GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN), - GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1), - GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2), - GPIO_FN(SCIFA5_RXD), - GPIO_FN(SCIFA5_TXD), - GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1), - GPIO_FN(A0_EA0), GPIO_FN(BS), - GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0), - GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL), - GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2), - GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1), - GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3), - GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC), - GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4), - GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK), - GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5), - GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD), - GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0), - GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK), - GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1), - GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC), - GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2), - GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0), - GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3), - GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1), - GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4), - GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD), - GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5), - GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2), - GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL), - GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2), - GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5), - GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8), - GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11), - GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13), - GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15), - GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1), - GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A), - GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD), - GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE), - GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO), - GPIO_FN(NBRSTOUT), GPIO_FN(NBRST), - - /* 49-4 (FN) */ - GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD), - GPIO_FN(VIO_VD), GPIO_FN(VIO_HD), - GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2), - GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5), - GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8), - GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11), - GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14), - GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD), - GPIO_FN(VIO_CKO), - GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2), - GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0), - GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1), - GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2), - GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3), - GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0), - GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2), - GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1), - GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2), - GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1), - GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3), - GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1), - GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4), - GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2), - GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5), - GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2), - GPIO_FN(LCDD6), GPIO_FN(DV_D6), - GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2), - GPIO_FN(LCDD7), GPIO_FN(DV_D7), - GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3), - GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16), - GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17), - GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18), - GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19), - GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20), - GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21), - GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22), - GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23), - GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24), - GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25), - GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK), - GPIO_FN(D26), GPIO_FN(ED26), - GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC), - GPIO_FN(D27), GPIO_FN(ED27), - GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0), - GPIO_FN(D28), GPIO_FN(ED28), - GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1), - GPIO_FN(D29), GPIO_FN(ED29), - GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1), - GPIO_FN(D30), GPIO_FN(ED30), - GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2), - GPIO_FN(D31), GPIO_FN(ED31), - GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD), - GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC), - - /* 49-5 (FN) */ - GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3), - GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK), - GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI), - GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD), - GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD), - GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3), - GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7), - GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR), - GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR), - GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0), - GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1), - GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON), - GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS), - GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD), - GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2), - GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2), - GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD), - GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2), - GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), - GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3), - GPIO_FN(MSIOF1_SS2), - GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT), - GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL), - GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3), - GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3), - GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1), - GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK), - GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC), - GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD), - GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW), - GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), - GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), - GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2), - GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD), - GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3), - GPIO_FN(SDHICLK0), GPIO_FN(TCK2), - GPIO_FN(SDHICD0), - GPIO_FN(SDHID0_0), GPIO_FN(TMS2), - GPIO_FN(SDHID0_1), GPIO_FN(TDO2), - GPIO_FN(SDHID0_2), GPIO_FN(TDI2), - GPIO_FN(SDHID0_3), GPIO_FN(RTCK2), - - /* 49-6 (FN) */ - GPIO_FN(SDHICMD0), GPIO_FN(TRST2), - GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2), - GPIO_FN(SDHICLK1), GPIO_FN(TCK3), - GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), - GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3), - GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2), - GPIO_FN(TS_SDAT2), GPIO_FN(TDO3), - GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), - GPIO_FN(TS_SDEN2), GPIO_FN(TDI3), - GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), - GPIO_FN(TS_SCK2), GPIO_FN(RTCK3), - GPIO_FN(SDHICMD1), GPIO_FN(TRST3), - GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK), - GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD), - GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS), - GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD), - GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS), - GPIO_FN(SDHICMD2), - GPIO_FN(RESETOUTS), - GPIO_FN(DIVLOCK), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xe6050000), /* PORT0CR */ - PORTCR(1, 0xe6050001), /* PORT1CR */ - PORTCR(2, 0xe6050002), /* PORT2CR */ - PORTCR(3, 0xe6050003), /* PORT3CR */ - PORTCR(4, 0xe6050004), /* PORT4CR */ - PORTCR(5, 0xe6050005), /* PORT5CR */ - PORTCR(6, 0xe6050006), /* PORT6CR */ - PORTCR(7, 0xe6050007), /* PORT7CR */ - PORTCR(8, 0xe6050008), /* PORT8CR */ - PORTCR(9, 0xe6050009), /* PORT9CR */ - - PORTCR(10, 0xe605000a), /* PORT10CR */ - PORTCR(11, 0xe605000b), /* PORT11CR */ - PORTCR(12, 0xe605000c), /* PORT12CR */ - PORTCR(13, 0xe605000d), /* PORT13CR */ - PORTCR(14, 0xe605000e), /* PORT14CR */ - PORTCR(15, 0xe605000f), /* PORT15CR */ - PORTCR(16, 0xe6050010), /* PORT16CR */ - PORTCR(17, 0xe6050011), /* PORT17CR */ - PORTCR(18, 0xe6050012), /* PORT18CR */ - PORTCR(19, 0xe6050013), /* PORT19CR */ - - PORTCR(20, 0xe6050014), /* PORT20CR */ - PORTCR(21, 0xe6050015), /* PORT21CR */ - PORTCR(22, 0xe6050016), /* PORT22CR */ - PORTCR(23, 0xe6050017), /* PORT23CR */ - PORTCR(24, 0xe6050018), /* PORT24CR */ - PORTCR(25, 0xe6050019), /* PORT25CR */ - PORTCR(26, 0xe605001a), /* PORT26CR */ - PORTCR(27, 0xe605001b), /* PORT27CR */ - PORTCR(28, 0xe605001c), /* PORT28CR */ - PORTCR(29, 0xe605001d), /* PORT29CR */ - - PORTCR(30, 0xe605001e), /* PORT30CR */ - PORTCR(31, 0xe605001f), /* PORT31CR */ - PORTCR(32, 0xe6050020), /* PORT32CR */ - PORTCR(33, 0xe6050021), /* PORT33CR */ - PORTCR(34, 0xe6050022), /* PORT34CR */ - PORTCR(35, 0xe6050023), /* PORT35CR */ - PORTCR(36, 0xe6050024), /* PORT36CR */ - PORTCR(37, 0xe6050025), /* PORT37CR */ - PORTCR(38, 0xe6050026), /* PORT38CR */ - PORTCR(39, 0xe6050027), /* PORT39CR */ - - PORTCR(40, 0xe6050028), /* PORT40CR */ - PORTCR(41, 0xe6050029), /* PORT41CR */ - PORTCR(42, 0xe605002a), /* PORT42CR */ - PORTCR(43, 0xe605002b), /* PORT43CR */ - PORTCR(44, 0xe605002c), /* PORT44CR */ - PORTCR(45, 0xe605002d), /* PORT45CR */ - PORTCR(46, 0xe605002e), /* PORT46CR */ - PORTCR(47, 0xe605002f), /* PORT47CR */ - PORTCR(48, 0xe6050030), /* PORT48CR */ - PORTCR(49, 0xe6050031), /* PORT49CR */ - - PORTCR(50, 0xe6050032), /* PORT50CR */ - PORTCR(51, 0xe6050033), /* PORT51CR */ - PORTCR(52, 0xe6050034), /* PORT52CR */ - PORTCR(53, 0xe6050035), /* PORT53CR */ - PORTCR(54, 0xe6050036), /* PORT54CR */ - PORTCR(55, 0xe6050037), /* PORT55CR */ - PORTCR(56, 0xe6050038), /* PORT56CR */ - PORTCR(57, 0xe6050039), /* PORT57CR */ - PORTCR(58, 0xe605003a), /* PORT58CR */ - PORTCR(59, 0xe605003b), /* PORT59CR */ - - PORTCR(60, 0xe605003c), /* PORT60CR */ - PORTCR(61, 0xe605003d), /* PORT61CR */ - PORTCR(62, 0xe605003e), /* PORT62CR */ - PORTCR(63, 0xe605003f), /* PORT63CR */ - PORTCR(64, 0xe6050040), /* PORT64CR */ - PORTCR(65, 0xe6050041), /* PORT65CR */ - PORTCR(66, 0xe6050042), /* PORT66CR */ - PORTCR(67, 0xe6050043), /* PORT67CR */ - PORTCR(68, 0xe6050044), /* PORT68CR */ - PORTCR(69, 0xe6050045), /* PORT69CR */ - - PORTCR(70, 0xe6050046), /* PORT70CR */ - PORTCR(71, 0xe6050047), /* PORT71CR */ - PORTCR(72, 0xe6050048), /* PORT72CR */ - PORTCR(73, 0xe6050049), /* PORT73CR */ - PORTCR(74, 0xe605004a), /* PORT74CR */ - PORTCR(75, 0xe605004b), /* PORT75CR */ - PORTCR(76, 0xe605004c), /* PORT76CR */ - PORTCR(77, 0xe605004d), /* PORT77CR */ - PORTCR(78, 0xe605004e), /* PORT78CR */ - PORTCR(79, 0xe605004f), /* PORT79CR */ - - PORTCR(80, 0xe6050050), /* PORT80CR */ - PORTCR(81, 0xe6050051), /* PORT81CR */ - PORTCR(82, 0xe6050052), /* PORT82CR */ - PORTCR(83, 0xe6050053), /* PORT83CR */ - PORTCR(84, 0xe6050054), /* PORT84CR */ - PORTCR(85, 0xe6050055), /* PORT85CR */ - PORTCR(86, 0xe6050056), /* PORT86CR */ - PORTCR(87, 0xe6050057), /* PORT87CR */ - PORTCR(88, 0xe6051058), /* PORT88CR */ - PORTCR(89, 0xe6051059), /* PORT89CR */ - - PORTCR(90, 0xe605105a), /* PORT90CR */ - PORTCR(91, 0xe605105b), /* PORT91CR */ - PORTCR(92, 0xe605105c), /* PORT92CR */ - PORTCR(93, 0xe605105d), /* PORT93CR */ - PORTCR(94, 0xe605105e), /* PORT94CR */ - PORTCR(95, 0xe605105f), /* PORT95CR */ - PORTCR(96, 0xe6051060), /* PORT96CR */ - PORTCR(97, 0xe6051061), /* PORT97CR */ - PORTCR(98, 0xe6051062), /* PORT98CR */ - PORTCR(99, 0xe6051063), /* PORT99CR */ - - PORTCR(100, 0xe6051064), /* PORT100CR */ - PORTCR(101, 0xe6051065), /* PORT101CR */ - PORTCR(102, 0xe6051066), /* PORT102CR */ - PORTCR(103, 0xe6051067), /* PORT103CR */ - PORTCR(104, 0xe6051068), /* PORT104CR */ - PORTCR(105, 0xe6051069), /* PORT105CR */ - PORTCR(106, 0xe605106a), /* PORT106CR */ - PORTCR(107, 0xe605106b), /* PORT107CR */ - PORTCR(108, 0xe605106c), /* PORT108CR */ - PORTCR(109, 0xe605106d), /* PORT109CR */ - - PORTCR(110, 0xe605106e), /* PORT110CR */ - PORTCR(111, 0xe605106f), /* PORT111CR */ - PORTCR(112, 0xe6051070), /* PORT112CR */ - PORTCR(113, 0xe6051071), /* PORT113CR */ - PORTCR(114, 0xe6051072), /* PORT114CR */ - PORTCR(115, 0xe6051073), /* PORT115CR */ - PORTCR(116, 0xe6051074), /* PORT116CR */ - PORTCR(117, 0xe6051075), /* PORT117CR */ - PORTCR(118, 0xe6051076), /* PORT118CR */ - PORTCR(119, 0xe6051077), /* PORT119CR */ - - PORTCR(120, 0xe6051078), /* PORT120CR */ - PORTCR(121, 0xe6051079), /* PORT121CR */ - PORTCR(122, 0xe605107a), /* PORT122CR */ - PORTCR(123, 0xe605107b), /* PORT123CR */ - PORTCR(124, 0xe605107c), /* PORT124CR */ - PORTCR(125, 0xe605107d), /* PORT125CR */ - PORTCR(126, 0xe605107e), /* PORT126CR */ - PORTCR(127, 0xe605107f), /* PORT127CR */ - PORTCR(128, 0xe6051080), /* PORT128CR */ - PORTCR(129, 0xe6051081), /* PORT129CR */ - - PORTCR(130, 0xe6051082), /* PORT130CR */ - PORTCR(131, 0xe6051083), /* PORT131CR */ - PORTCR(132, 0xe6051084), /* PORT132CR */ - PORTCR(133, 0xe6051085), /* PORT133CR */ - PORTCR(134, 0xe6051086), /* PORT134CR */ - PORTCR(135, 0xe6051087), /* PORT135CR */ - PORTCR(136, 0xe6051088), /* PORT136CR */ - PORTCR(137, 0xe6051089), /* PORT137CR */ - PORTCR(138, 0xe605108a), /* PORT138CR */ - PORTCR(139, 0xe605108b), /* PORT139CR */ - - PORTCR(140, 0xe605108c), /* PORT140CR */ - PORTCR(141, 0xe605108d), /* PORT141CR */ - PORTCR(142, 0xe605108e), /* PORT142CR */ - PORTCR(143, 0xe605108f), /* PORT143CR */ - PORTCR(144, 0xe6051090), /* PORT144CR */ - PORTCR(145, 0xe6051091), /* PORT145CR */ - PORTCR(146, 0xe6051092), /* PORT146CR */ - PORTCR(147, 0xe6051093), /* PORT147CR */ - PORTCR(148, 0xe6051094), /* PORT148CR */ - PORTCR(149, 0xe6051095), /* PORT149CR */ - - PORTCR(150, 0xe6051096), /* PORT150CR */ - PORTCR(151, 0xe6051097), /* PORT151CR */ - PORTCR(152, 0xe6051098), /* PORT152CR */ - PORTCR(153, 0xe6051099), /* PORT153CR */ - PORTCR(154, 0xe605109a), /* PORT154CR */ - PORTCR(155, 0xe605109b), /* PORT155CR */ - PORTCR(156, 0xe605109c), /* PORT156CR */ - PORTCR(157, 0xe605109d), /* PORT157CR */ - PORTCR(158, 0xe605109e), /* PORT158CR */ - PORTCR(159, 0xe605109f), /* PORT159CR */ - - PORTCR(160, 0xe60510a0), /* PORT160CR */ - PORTCR(161, 0xe60510a1), /* PORT161CR */ - PORTCR(162, 0xe60510a2), /* PORT162CR */ - PORTCR(163, 0xe60510a3), /* PORT163CR */ - PORTCR(164, 0xe60510a4), /* PORT164CR */ - PORTCR(165, 0xe60510a5), /* PORT165CR */ - PORTCR(166, 0xe60510a6), /* PORT166CR */ - PORTCR(167, 0xe60510a7), /* PORT167CR */ - PORTCR(168, 0xe60510a8), /* PORT168CR */ - PORTCR(169, 0xe60510a9), /* PORT169CR */ - - PORTCR(170, 0xe60510aa), /* PORT170CR */ - PORTCR(171, 0xe60510ab), /* PORT171CR */ - PORTCR(172, 0xe60510ac), /* PORT172CR */ - PORTCR(173, 0xe60510ad), /* PORT173CR */ - PORTCR(174, 0xe60510ae), /* PORT174CR */ - PORTCR(175, 0xe60520af), /* PORT175CR */ - PORTCR(176, 0xe60520b0), /* PORT176CR */ - PORTCR(177, 0xe60520b1), /* PORT177CR */ - PORTCR(178, 0xe60520b2), /* PORT178CR */ - PORTCR(179, 0xe60520b3), /* PORT179CR */ - - PORTCR(180, 0xe60520b4), /* PORT180CR */ - PORTCR(181, 0xe60520b5), /* PORT181CR */ - PORTCR(182, 0xe60520b6), /* PORT182CR */ - PORTCR(183, 0xe60520b7), /* PORT183CR */ - PORTCR(184, 0xe60520b8), /* PORT184CR */ - PORTCR(185, 0xe60520b9), /* PORT185CR */ - PORTCR(186, 0xe60520ba), /* PORT186CR */ - PORTCR(187, 0xe60520bb), /* PORT187CR */ - PORTCR(188, 0xe60520bc), /* PORT188CR */ - PORTCR(189, 0xe60520bd), /* PORT189CR */ - - PORTCR(190, 0xe60520be), /* PORT190CR */ - PORTCR(191, 0xe60520bf), /* PORT191CR */ - PORTCR(192, 0xe60520c0), /* PORT192CR */ - PORTCR(193, 0xe60520c1), /* PORT193CR */ - PORTCR(194, 0xe60520c2), /* PORT194CR */ - PORTCR(195, 0xe60520c3), /* PORT195CR */ - PORTCR(196, 0xe60520c4), /* PORT196CR */ - PORTCR(197, 0xe60520c5), /* PORT197CR */ - PORTCR(198, 0xe60520c6), /* PORT198CR */ - PORTCR(199, 0xe60520c7), /* PORT199CR */ - - PORTCR(200, 0xe60520c8), /* PORT200CR */ - PORTCR(201, 0xe60520c9), /* PORT201CR */ - PORTCR(202, 0xe60520ca), /* PORT202CR */ - PORTCR(203, 0xe60520cb), /* PORT203CR */ - PORTCR(204, 0xe60520cc), /* PORT204CR */ - PORTCR(205, 0xe60520cd), /* PORT205CR */ - PORTCR(206, 0xe60520ce), /* PORT206CR */ - PORTCR(207, 0xe60520cf), /* PORT207CR */ - PORTCR(208, 0xe60520d0), /* PORT208CR */ - PORTCR(209, 0xe60520d1), /* PORT209CR */ - - PORTCR(210, 0xe60520d2), /* PORT210CR */ - PORTCR(211, 0xe60520d3), /* PORT211CR */ - PORTCR(212, 0xe60520d4), /* PORT212CR */ - PORTCR(213, 0xe60520d5), /* PORT213CR */ - PORTCR(214, 0xe60520d6), /* PORT214CR */ - PORTCR(215, 0xe60520d7), /* PORT215CR */ - PORTCR(216, 0xe60520d8), /* PORT216CR */ - PORTCR(217, 0xe60520d9), /* PORT217CR */ - PORTCR(218, 0xe60520da), /* PORT218CR */ - PORTCR(219, 0xe60520db), /* PORT219CR */ - - PORTCR(220, 0xe60520dc), /* PORT220CR */ - PORTCR(221, 0xe60520dd), /* PORT221CR */ - PORTCR(222, 0xe60520de), /* PORT222CR */ - PORTCR(223, 0xe60520df), /* PORT223CR */ - PORTCR(224, 0xe60520e0), /* PORT224CR */ - PORTCR(225, 0xe60520e1), /* PORT225CR */ - PORTCR(226, 0xe60520e2), /* PORT226CR */ - PORTCR(227, 0xe60520e3), /* PORT227CR */ - PORTCR(228, 0xe60520e4), /* PORT228CR */ - PORTCR(229, 0xe60520e5), /* PORT229CR */ - - PORTCR(230, 0xe60520e6), /* PORT230CR */ - PORTCR(231, 0xe60520e7), /* PORT231CR */ - PORTCR(232, 0xe60520e8), /* PORT232CR */ - PORTCR(233, 0xe60520e9), /* PORT233CR */ - PORTCR(234, 0xe60520ea), /* PORT234CR */ - PORTCR(235, 0xe60520eb), /* PORT235CR */ - PORTCR(236, 0xe60530ec), /* PORT236CR */ - PORTCR(237, 0xe60530ed), /* PORT237CR */ - PORTCR(238, 0xe60530ee), /* PORT238CR */ - PORTCR(239, 0xe60530ef), /* PORT239CR */ - - PORTCR(240, 0xe60530f0), /* PORT240CR */ - PORTCR(241, 0xe60530f1), /* PORT241CR */ - PORTCR(242, 0xe60530f2), /* PORT242CR */ - PORTCR(243, 0xe60530f3), /* PORT243CR */ - PORTCR(244, 0xe60530f4), /* PORT244CR */ - PORTCR(245, 0xe60530f5), /* PORT245CR */ - PORTCR(246, 0xe60530f6), /* PORT246CR */ - PORTCR(247, 0xe60530f7), /* PORT247CR */ - PORTCR(248, 0xe60530f8), /* PORT248CR */ - PORTCR(249, 0xe60530f9), /* PORT249CR */ - - PORTCR(250, 0xe60530fa), /* PORT250CR */ - PORTCR(251, 0xe60530fb), /* PORT251CR */ - PORTCR(252, 0xe60530fc), /* PORT252CR */ - PORTCR(253, 0xe60530fd), /* PORT253CR */ - PORTCR(254, 0xe60530fe), /* PORT254CR */ - PORTCR(255, 0xe60530ff), /* PORT255CR */ - PORTCR(256, 0xe6053100), /* PORT256CR */ - PORTCR(257, 0xe6053101), /* PORT257CR */ - PORTCR(258, 0xe6053102), /* PORT258CR */ - PORTCR(259, 0xe6053103), /* PORT259CR */ - - PORTCR(260, 0xe6053104), /* PORT260CR */ - PORTCR(261, 0xe6053105), /* PORT261CR */ - PORTCR(262, 0xe6053106), /* PORT262CR */ - PORTCR(263, 0xe6053107), /* PORT263CR */ - PORTCR(264, 0xe6053108), /* PORT264CR */ - PORTCR(265, 0xe6053109), /* PORT265CR */ - PORTCR(266, 0xe605310a), /* PORT266CR */ - PORTCR(267, 0xe605310b), /* PORT267CR */ - PORTCR(268, 0xe605310c), /* PORT268CR */ - PORTCR(269, 0xe605310d), /* PORT269CR */ - - PORTCR(270, 0xe605310e), /* PORT270CR */ - PORTCR(271, 0xe605310f), /* PORT271CR */ - PORTCR(272, 0xe6053110), /* PORT272CR */ - - { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - MSELBCR_MSEL2_0, MSELBCR_MSEL2_1, - 0, 0, - 0, 0 } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } - }, - { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } - }, - { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } - }, - { PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) { - PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA, - PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA, - PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } - }, - { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) { - PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA, - PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA, - PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA, - PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA, - PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA, - PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA, - PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } - }, - { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) { - PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, - PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, - PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, - PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, - PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, - PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, - PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, - PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } - }, - { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) { - PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, - PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, - PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, - PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, - PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, - PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, - PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, - PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } - }, - { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT272_DATA, - PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA, - PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA, - PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, - PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } - }, - { }, -}; - -static struct pinmux_info sh7367_pinmux_info = { - .name = "sh7367_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_DIVLOCK, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), -}; - -void sh7367_pinmux_init(void) -{ - register_pinmux(&sh7367_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c deleted file mode 100644 index f3117f67fa25..000000000000 --- a/arch/arm/mach-shmobile/pfc-sh7377.c +++ /dev/null @@ -1,1688 +0,0 @@ -/* - * sh7377 processor support - PFC hardware block - * - * Copyright (C) 2010 NISHIMOTO Hiroki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sh_pfc.h> -#include <mach/sh7377.h> - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ - PORT_10(fn, pfx##10, sfx), \ - PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \ - PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \ - PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \ - PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \ - PORT_1(fn, pfx##118, sfx), \ - PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \ - PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \ - PORT_10(fn, pfx##15, sfx), \ - PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \ - PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \ - PORT_1(fn, pfx##164, sfx), \ - PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \ - PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \ - PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \ - PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \ - PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \ - PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \ - PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \ - PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx), \ - PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx), \ - PORT_1(fn, pfx##264, sfx) - -enum { - PINMUX_RESERVED = 0, - - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */ - PINMUX_DATA_END, - - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */ - PINMUX_INPUT_END, - - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */ - PINMUX_INPUT_PULLUP_END, - - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */ - PINMUX_INPUT_PULLDOWN_END, - - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */ - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */ - - MSELBCR_MSEL17_1, MSELBCR_MSEL17_0, - MSELBCR_MSEL16_1, MSELBCR_MSEL16_0, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - /* Special Pull-up / Pull-down Functions */ - PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK, - PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK, - PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK, - PORT72_KEYIN6_PU_MARK, - - /* 55-1 */ - VBUS_0_MARK, - CPORT0_MARK, - CPORT1_MARK, - CPORT2_MARK, - CPORT3_MARK, - CPORT4_MARK, - CPORT5_MARK, - CPORT6_MARK, - CPORT7_MARK, - CPORT8_MARK, - CPORT9_MARK, - CPORT10_MARK, - CPORT11_MARK, SIN2_MARK, - CPORT12_MARK, XCTS2_MARK, - CPORT13_MARK, RFSPO4_MARK, - CPORT14_MARK, RFSPO5_MARK, - CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK, - CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK, - CPORT17_IC_OE_MARK, SOUT2_MARK, - CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK, - CPORT19_MPORT1_MARK, - CPORT20_MARK, RFSPO6_MARK, - CPORT21_MARK, STATUS0_MARK, - CPORT22_MARK, STATUS1_MARK, - CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK, - B_SYNLD1_MARK, - B_SYNLD2_MARK, SYSENMSK_MARK, - XMAINPS_MARK, - XDIVPS_MARK, - XIDRST_MARK, - IDCLK_MARK, IC_DP_MARK, - IDIO_MARK, IC_DM_MARK, - SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK, - SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK, - XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK, - XCTS1_MARK, SCIFA4_CTS_MARK, - PCMCLKO_MARK, - SYNC8KO_MARK, - - /* 55-2 */ - DNPCM_A_MARK, - UPPCM_A_MARK, - VACK_MARK, - XTALB1L_MARK, - GPS_AGC1_MARK, SCIFA0_RTS_MARK, - GPS_AGC4_MARK, SCIFA0_RXD_MARK, - GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK, - GPS_IM_MARK, - GPS_IS_MARK, - GPS_QM_MARK, - GPS_QS_MARK, - FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, - FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK, - FMSIOLR_MARK, - FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK, - FMSIOBT_MARK, - FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK, - FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK, - FMSIILR_MARK, - FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK, - FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK, - A0_EA0_MARK, BS_MARK, - A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK, - A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK, - A14_EA14_MARK, PORT60_KEYOUT5_MARK, - A15_EA15_MARK, PORT61_KEYOUT4_MARK, - A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK, - A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK, - A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK, - A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK, - A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK, - A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK, - A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK, - A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK, - A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK, - A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK, - A26_MARK, PORT72_KEYIN6_MARK, - D0_ED0_NAF0_MARK, - D1_ED1_NAF1_MARK, - D2_ED2_NAF2_MARK, - D3_ED3_NAF3_MARK, - D4_ED4_NAF4_MARK, - D5_ED5_NAF5_MARK, - D6_ED6_NAF6_MARK, - D7_ED7_NAF7_MARK, - D8_ED8_NAF8_MARK, - D9_ED9_NAF9_MARK, - D10_ED10_NAF10_MARK, - D11_ED11_NAF11_MARK, - D12_ED12_NAF12_MARK, - D13_ED13_NAF13_MARK, - D14_ED14_NAF14_MARK, - D15_ED15_NAF15_MARK, - CS4_MARK, - CS5A_MARK, FMSICK_MARK, - CS5B_MARK, FCE1_MARK, - - /* 55-3 */ - CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK, - FCE0_MARK, - WAIT_MARK, DREQ0_MARK, - RD_XRD_MARK, - WE0_XWR0_FWE_MARK, - WE1_XWR1_MARK, - FRB_MARK, - CKO_MARK, - NBRSTOUT_MARK, - NBRST_MARK, - GPS_EPPSIN_MARK, - LATCHPULSE_MARK, - LTESIGNAL_MARK, - LEGACYSTATE_MARK, - TCKON_MARK, - VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK, - VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK, - VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK, - VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK, - VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK, - VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK, - VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK, - VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK, - VIO_D6_MARK, PORT136_KEYIN2_MARK, - VIO_D7_MARK, PORT137_KEYIN3_MARK, - VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK, - VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK, - VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK, - VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK, - VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK, - VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK, - VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK, - VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK, - VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK, - VIO_FIELD_MARK, PORT147_KEYIN5_MARK, - VIO_CKO_MARK, PORT148_KEYIN6_MARK, - A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK, - MFG0_IN2_MARK, - TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK, - TS_SDAT3_MARK, MSIOF2_RSYNC_MARK, - TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK, - SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK, - SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK, - XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK, - XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK, - - /* 55-4 */ - DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, - PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK, - PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK, - PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK, - MFG3_IN2_MARK, - PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK, - MFG3_IN1_MARK, - PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK, - MFG3_OUT1_MARK, TPU3TO0_MARK, - LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK, - LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK, - BBIF2_TSYNC1_MARK, - LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK, - BBIF2_TSCK1_MARK, - LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK, - BBIF2_TXD1_MARK, - LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK, - LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK, - MFG2_OUT2_MARK, - TPU2TO1_MARK, - LCDD6_MARK, XWR2_MARK, - LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK, - LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK, - LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK, - LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK, - LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK, - LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK, - LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK, - LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK, - LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK, - VIO_DR7_MARK, D23_MARK, ED23_MARK, - LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK, - VIO_VDR_MARK, D24_MARK, ED24_MARK, - LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK, - LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK, - LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK, - LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK, - LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK, - LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK, - LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK, - LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK, - LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK, - LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK, - PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK, - LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK, - LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK, - LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK, - LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, - SCIFA1_TXD_MARK, OVCN2_MARK, - EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK, - SCIFA1_RTS_MARK, IDIN_MARK, - SCIFA1_RXD_MARK, - SCIFA1_CTS_MARK, MFG1_IN1_MARK, - MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK, - MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK, - MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK, - MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK, - PORT233_FSIACK_MARK, - MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK, - MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK, - MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK, - MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK, - MSIOF1_SS1_MARK, EDBGREQ3_MARK, - - /* 55-5 */ - MSIOF1_SS2_MARK, - SCIFA6_TXD_MARK, - PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, - TPU4TO0_MARK, - PORT242_IRDA_IN_MARK, MFG4_IN2_MARK, - PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK, - PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK, - PORT244_MSIOF2_RXD_MARK, - PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK, - PORT245_MSIOF2_TXD_MARK, - PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, - TPU1TO0_MARK, - PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, - TPU3TO1_MARK, - PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, - TPU2TO0_MARK, - PORT248_MSIOF2_TSCK_MARK, - PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK, - SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK, - SDHICD0_MARK, - SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK, - SDHID0_1_MARK, TDO2_SWO0_MC0_MARK, - SDHID0_2_MARK, TDI2_MARK, - SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK, - SDHICMD0_MARK, TRST2_MARK, - SDHIWP0_MARK, EDBGREQ2_MARK, - SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK, - SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK, - TMS3_SWDIO_MC1_MARK, - SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK, - SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK, - SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK, - SDHICMD1_MARK, TRST3_MARK, - RESETOUTS_MARK, - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - /* specify valid pin states for each pin in GPIO mode */ - /* 55-1 (GPIO) */ - PORT_DATA_I_PD(0), PORT_DATA_I_PU(1), - PORT_DATA_I_PU(2), PORT_DATA_I_PU(3), - PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), - PORT_DATA_I_PU(6), PORT_DATA_I_PU(7), - PORT_DATA_I_PU(8), PORT_DATA_I_PU(9), - PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), - PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13), - PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15), - PORT_DATA_O(16), PORT_DATA_IO(17), - PORT_DATA_O(18), PORT_DATA_O(19), - PORT_DATA_O(20), PORT_DATA_O(21), - PORT_DATA_O(22), PORT_DATA_O(23), - PORT_DATA_O(24), PORT_DATA_I_PD(25), - PORT_DATA_I_PD(26), PORT_DATA_O(27), - PORT_DATA_O(28), PORT_DATA_O(29), - PORT_DATA_IO(30), PORT_DATA_IO_PU(31), - PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33), - PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35), - PORT_DATA_O(36), PORT_DATA_IO(37), - - /* 55-2 (GPIO) */ - PORT_DATA_O(38), PORT_DATA_I_PU(39), - PORT_DATA_I_PU_PD(40), PORT_DATA_O(41), - PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43), - PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45), - PORT_DATA_I_PD(46), PORT_DATA_I_PD(47), - PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49), - PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51), - PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53), - PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55), - PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57), - PORT_DATA_IO(58), PORT_DATA_IO(59), - PORT_DATA_IO(60), PORT_DATA_IO(61), - PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63), - PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65), - PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67), - PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69), - PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71), - PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73), - PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75), - PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77), - PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79), - PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81), - PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83), - PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85), - PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87), - PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89), - PORT_DATA_O(90), PORT_DATA_IO_PU(91), - PORT_DATA_O(92), - - /* 55-3 (GPIO) */ - PORT_DATA_IO_PU(93), - PORT_DATA_O(94), - PORT_DATA_I_PU_PD(95), - PORT_DATA_IO(96), PORT_DATA_IO(97), - PORT_DATA_IO(98), PORT_DATA_I_PU(99), - PORT_DATA_O(100), PORT_DATA_O(101), - PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103), - PORT_DATA_I_PD(104), PORT_DATA_I_PD(105), - PORT_DATA_I_PD(106), PORT_DATA_I_PD(107), - PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109), - PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111), - PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113), - PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115), - PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117), - PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128), - PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130), - PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132), - PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134), - PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136), - PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138), - PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140), - PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142), - PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144), - PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146), - PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148), - PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150), - PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152), - PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), - PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156), - PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158), - - /* 55-4 (GPIO) */ - PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160), - PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162), - PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164), - PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193), - PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195), - PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), - PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199), - PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201), - PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203), - PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205), - PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207), - PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209), - PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), - PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), - PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215), - PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217), - PORT_DATA_O(218), PORT_DATA_IO_PD(219), - PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221), - PORT_DATA_IO_PU_PD(222), - PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224), - PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226), - PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228), - PORT_DATA_I_PD(229), PORT_DATA_IO(230), - PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232), - PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234), - PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236), - PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238), - - /* 55-5 (GPIO) */ - PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240), - PORT_DATA_O(241), PORT_DATA_I_PD(242), - PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244), - PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246), - PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248), - PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250), - PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252), - PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254), - PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256), - PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258), - PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260), - PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262), - PORT_DATA_IO_PU_PD(263), - - /* Special Pull-up / Pull-down Functions */ - PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT66_FN2, PORT66_IN_PU), - PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT67_FN2, PORT67_IN_PU), - PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT68_FN2, PORT68_IN_PU), - PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT69_FN2, PORT69_IN_PU), - PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT70_FN2, PORT70_IN_PU), - PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT71_FN2, PORT71_IN_PU), - PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0, - PORT72_FN2, PORT72_IN_PU), - - - /* 55-1 (FN) */ - PINMUX_DATA(VBUS_0_MARK, PORT0_FN1), - PINMUX_DATA(CPORT0_MARK, PORT1_FN1), - PINMUX_DATA(CPORT1_MARK, PORT2_FN1), - PINMUX_DATA(CPORT2_MARK, PORT3_FN1), - PINMUX_DATA(CPORT3_MARK, PORT4_FN1), - PINMUX_DATA(CPORT4_MARK, PORT5_FN1), - PINMUX_DATA(CPORT5_MARK, PORT6_FN1), - PINMUX_DATA(CPORT6_MARK, PORT7_FN1), - PINMUX_DATA(CPORT7_MARK, PORT8_FN1), - PINMUX_DATA(CPORT8_MARK, PORT9_FN1), - PINMUX_DATA(CPORT9_MARK, PORT10_FN1), - PINMUX_DATA(CPORT10_MARK, PORT11_FN1), - PINMUX_DATA(CPORT11_MARK, PORT12_FN1), - PINMUX_DATA(SIN2_MARK, PORT12_FN2), - PINMUX_DATA(CPORT12_MARK, PORT13_FN1), - PINMUX_DATA(XCTS2_MARK, PORT13_FN2), - PINMUX_DATA(CPORT13_MARK, PORT14_FN1), - PINMUX_DATA(RFSPO4_MARK, PORT14_FN2), - PINMUX_DATA(CPORT14_MARK, PORT15_FN1), - PINMUX_DATA(RFSPO5_MARK, PORT15_FN2), - PINMUX_DATA(CPORT15_MARK, PORT16_FN1), - PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), - PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3), - PINMUX_DATA(CPORT16_MARK, PORT17_FN1), - PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2), - PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3), - PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1), - PINMUX_DATA(SOUT2_MARK, PORT18_FN2), - PINMUX_DATA(CPORT18_MARK, PORT19_FN1), - PINMUX_DATA(XRTS2_MARK, PORT19_FN2), - PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3), - PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1), - PINMUX_DATA(CPORT20_MARK, PORT21_FN1), - PINMUX_DATA(RFSPO6_MARK, PORT21_FN2), - PINMUX_DATA(CPORT21_MARK, PORT22_FN1), - PINMUX_DATA(STATUS0_MARK, PORT22_FN2), - PINMUX_DATA(CPORT22_MARK, PORT23_FN1), - PINMUX_DATA(STATUS1_MARK, PORT23_FN2), - PINMUX_DATA(CPORT23_MARK, PORT24_FN1), - PINMUX_DATA(STATUS2_MARK, PORT24_FN2), - PINMUX_DATA(RFSPO7_MARK, PORT24_FN3), - PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1), - PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1), - PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2), - PINMUX_DATA(XMAINPS_MARK, PORT27_FN1), - PINMUX_DATA(XDIVPS_MARK, PORT28_FN1), - PINMUX_DATA(XIDRST_MARK, PORT29_FN1), - PINMUX_DATA(IDCLK_MARK, PORT30_FN1), - PINMUX_DATA(IC_DP_MARK, PORT30_FN2), - PINMUX_DATA(IDIO_MARK, PORT31_FN1), - PINMUX_DATA(IC_DM_MARK, PORT31_FN2), - PINMUX_DATA(SOUT1_MARK, PORT32_FN1), - PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2), - PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3), - PINMUX_DATA(SIN1_MARK, PORT33_FN1), - PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), - PINMUX_DATA(XWUP_MARK, PORT33_FN3), - PINMUX_DATA(XRTS1_MARK, PORT34_FN1), - PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2), - PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3), - PINMUX_DATA(XCTS1_MARK, PORT35_FN1), - PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2), - PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1), - PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1), - - /* 55-2 (FN) */ - PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1), - PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1), - PINMUX_DATA(VACK_MARK, PORT40_FN1), - PINMUX_DATA(XTALB1L_MARK, PORT41_FN1), - PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1), - PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2), - PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1), - PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2), - PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1), - PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2), - PINMUX_DATA(GPS_IM_MARK, PORT45_FN1), - PINMUX_DATA(GPS_IS_MARK, PORT46_FN1), - PINMUX_DATA(GPS_QM_MARK, PORT47_FN1), - PINMUX_DATA(GPS_QS_MARK, PORT48_FN1), - PINMUX_DATA(FMSOCK_MARK, PORT49_FN1), - PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2), - PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3), - PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1), - PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), - PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), - PINMUX_DATA(IPORT3_MARK, PORT50_FN4), - PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5), - PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1), - PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), - PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), - PINMUX_DATA(OPORT1_MARK, PORT51_FN4), - PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5), - PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1), - PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2), - PINMUX_DATA(OPORT2_MARK, PORT52_FN3), - PINMUX_DATA(FMSOILR_MARK, PORT53_FN1), - PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2), - PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), - PINMUX_DATA(OPORT3_MARK, PORT53_FN4), - PINMUX_DATA(FMSIILR_MARK, PORT53_FN5), - PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1), - PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2), - PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), - PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4), - PINMUX_DATA(FMSISLD_MARK, PORT55_FN1), - PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2), - PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3), - PINMUX_DATA(A0_EA0_MARK, PORT57_FN1), - PINMUX_DATA(BS_MARK, PORT57_FN2), - PINMUX_DATA(A12_EA12_MARK, PORT58_FN1), - PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2), - PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3), - PINMUX_DATA(A13_EA13_MARK, PORT59_FN1), - PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2), - PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3), - PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4), - PINMUX_DATA(A14_EA14_MARK, PORT60_FN1), - PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2), - PINMUX_DATA(A15_EA15_MARK, PORT61_FN1), - PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2), - PINMUX_DATA(A16_EA16_MARK, PORT62_FN1), - PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2), - PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3), - PINMUX_DATA(A17_EA17_MARK, PORT63_FN1), - PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2), - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3), - PINMUX_DATA(A18_EA18_MARK, PORT64_FN1), - PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2), - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3), - PINMUX_DATA(A19_EA19_MARK, PORT65_FN1), - PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2), - PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3), - PINMUX_DATA(A20_EA20_MARK, PORT66_FN1), - PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2), - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3), - PINMUX_DATA(A21_EA21_MARK, PORT67_FN1), - PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2), - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3), - PINMUX_DATA(A22_EA22_MARK, PORT68_FN1), - PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2), - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3), - PINMUX_DATA(A23_EA23_MARK, PORT69_FN1), - PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2), - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3), - PINMUX_DATA(A24_EA24_MARK, PORT70_FN1), - PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2), - PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3), - PINMUX_DATA(A25_EA25_MARK, PORT71_FN1), - PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2), - PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3), - PINMUX_DATA(A26_MARK, PORT72_FN1), - PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2), - PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1), - PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1), - PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1), - PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1), - PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1), - PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1), - PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1), - PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1), - PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1), - PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1), - PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1), - PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1), - PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1), - PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1), - PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1), - PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1), - PINMUX_DATA(CS4_MARK, PORT90_FN1), - PINMUX_DATA(CS5A_MARK, PORT91_FN1), - PINMUX_DATA(FMSICK_MARK, PORT91_FN2), - PINMUX_DATA(CS5B_MARK, PORT92_FN1), - PINMUX_DATA(FCE1_MARK, PORT92_FN2), - - /* 55-3 (FN) */ - PINMUX_DATA(CS6B_MARK, PORT93_FN1), - PINMUX_DATA(XCS2_MARK, PORT93_FN2), - PINMUX_DATA(CS6A_MARK, PORT93_FN3), - PINMUX_DATA(DACK0_MARK, PORT93_FN4), - PINMUX_DATA(FCE0_MARK, PORT94_FN1), - PINMUX_DATA(WAIT_MARK, PORT95_FN1), - PINMUX_DATA(DREQ0_MARK, PORT95_FN2), - PINMUX_DATA(RD_XRD_MARK, PORT96_FN1), - PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1), - PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1), - PINMUX_DATA(FRB_MARK, PORT99_FN1), - PINMUX_DATA(CKO_MARK, PORT100_FN1), - PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1), - PINMUX_DATA(NBRST_MARK, PORT102_FN1), - PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1), - PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1), - PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1), - PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1), - PINMUX_DATA(TCKON_MARK, PORT118_FN1), - PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), - PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2), - PINMUX_DATA(IPORT0_MARK, PORT128_FN3), - PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), - PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2), - PINMUX_DATA(IPORT1_MARK, PORT129_FN3), - PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), - PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2), - PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3), - PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), - PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2), - PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), - PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), - PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2), - PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), - PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), - PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2), - PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3), - PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), - PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2), - PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3), - PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), - PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2), - PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3), - PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), - PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2), - PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), - PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2), - PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), - PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2), - PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3), - PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), - PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2), - PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3), - PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), - PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2), - PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3), - PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4), - PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), - PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2), - PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3), - PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4), - PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), - PINMUX_DATA(M13_BSW_MARK, PORT142_FN2), - PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3), - PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), - PINMUX_DATA(M14_GSW_MARK, PORT143_FN2), - PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3), - PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), - PINMUX_DATA(M15_RSW_MARK, PORT144_FN2), - PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3), - PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), - PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2), - PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3), - PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), - PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2), - PINMUX_DATA(IPORT2_MARK, PORT146_FN3), - PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), - PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2), - PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1), - PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2), - PINMUX_DATA(A27_MARK, PORT149_FN1), - PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2), - PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), - PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1), - PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1), - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2), - PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1), - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2), - PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1), - PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2), - PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3), - PINMUX_DATA(SOUT3_MARK, PORT154_FN1), - PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2), - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3), - PINMUX_DATA(SIN3_MARK, PORT155_FN1), - PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2), - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3), - PINMUX_DATA(XRTS3_MARK, PORT156_FN1), - PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2), - PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3), - PINMUX_DATA(XCTS3_MARK, PORT157_FN1), - PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2), - PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3), - - /* 55-4 (FN) */ - PINMUX_DATA(DINT_MARK, PORT158_FN1), - PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2), - PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3), - PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1), - PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2), - PINMUX_DATA(NMI_MARK, PORT159_FN3), - PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1), - PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2), - PINMUX_DATA(SOUT0_MARK, PORT160_FN3), - PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1), - PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2), - PINMUX_DATA(XCTS0_MARK, PORT161_FN3), - PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4), - PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1), - PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2), - PINMUX_DATA(SIN0_MARK, PORT162_FN3), - PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4), - PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1), - PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2), - PINMUX_DATA(XRTS0_MARK, PORT163_FN3), - PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4), - PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5), - PINMUX_DATA(LCDD0_MARK, PORT192_FN1), - PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2), - PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3), - PINMUX_DATA(LCDD1_MARK, PORT193_FN1), - PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2), - PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3), - PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4), - PINMUX_DATA(LCDD2_MARK, PORT194_FN1), - PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2), - PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3), - PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4), - PINMUX_DATA(LCDD3_MARK, PORT195_FN1), - PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2), - PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3), - PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4), - PINMUX_DATA(LCDD4_MARK, PORT196_FN1), - PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2), - PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3), - PINMUX_DATA(LCDD5_MARK, PORT197_FN1), - PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2), - PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3), - PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4), - PINMUX_DATA(LCDD6_MARK, PORT198_FN1), - PINMUX_DATA(LCDD7_MARK, PORT199_FN1), - PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), - PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3), - PINMUX_DATA(LCDD8_MARK, PORT200_FN1), - PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2), - PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3), - PINMUX_DATA(D16_MARK, PORT200_FN4), - PINMUX_DATA(LCDD9_MARK, PORT201_FN1), - PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2), - PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3), - PINMUX_DATA(D17_MARK, PORT201_FN4), - PINMUX_DATA(LCDD10_MARK, PORT202_FN1), - PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2), - PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3), - PINMUX_DATA(D18_MARK, PORT202_FN4), - PINMUX_DATA(LCDD11_MARK, PORT203_FN1), - PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2), - PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3), - PINMUX_DATA(D19_MARK, PORT203_FN4), - PINMUX_DATA(LCDD12_MARK, PORT204_FN1), - PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2), - PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3), - PINMUX_DATA(D20_MARK, PORT204_FN4), - PINMUX_DATA(LCDD13_MARK, PORT205_FN1), - PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2), - PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3), - PINMUX_DATA(D21_MARK, PORT205_FN4), - PINMUX_DATA(LCDD14_MARK, PORT206_FN1), - PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2), - PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3), - PINMUX_DATA(D22_MARK, PORT206_FN4), - PINMUX_DATA(LCDD15_MARK, PORT207_FN1), - PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2), - PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3), - PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4), - PINMUX_DATA(D23_MARK, PORT207_FN5), - PINMUX_DATA(LCDD16_MARK, PORT208_FN1), - PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2), - PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3), - PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4), - PINMUX_DATA(D24_MARK, PORT208_FN5), - PINMUX_DATA(LCDD17_MARK, PORT209_FN1), - PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2), - PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3), - PINMUX_DATA(D25_MARK, PORT209_FN4), - PINMUX_DATA(LCDD18_MARK, PORT210_FN1), - PINMUX_DATA(DREQ2_MARK, PORT210_FN2), - PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3), - PINMUX_DATA(D26_MARK, PORT210_FN4), - PINMUX_DATA(LCDD19_MARK, PORT211_FN1), - PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2), - PINMUX_DATA(D27_MARK, PORT211_FN3), - PINMUX_DATA(LCDD20_MARK, PORT212_FN1), - PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), - PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3), - PINMUX_DATA(D28_MARK, PORT212_FN4), - PINMUX_DATA(LCDD21_MARK, PORT213_FN1), - PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), - PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3), - PINMUX_DATA(D29_MARK, PORT213_FN4), - PINMUX_DATA(LCDD22_MARK, PORT214_FN1), - PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), - PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3), - PINMUX_DATA(D30_MARK, PORT214_FN4), - PINMUX_DATA(LCDD23_MARK, PORT215_FN1), - PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), - PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3), - PINMUX_DATA(D31_MARK, PORT215_FN4), - PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), - PINMUX_DATA(LCDWR_MARK, PORT216_FN2), - PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3), - PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4), - PINMUX_DATA(LCDRD_MARK, PORT217_FN1), - PINMUX_DATA(DACK2_MARK, PORT217_FN2), - PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3), - PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), - PINMUX_DATA(LCDCS_MARK, PORT218_FN2), - PINMUX_DATA(LCDCS2_MARK, PORT218_FN3), - PINMUX_DATA(DACK3_MARK, PORT218_FN4), - PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5), - PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6), - PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), - PINMUX_DATA(LCDRS_MARK, PORT219_FN2), - PINMUX_DATA(DREQ3_MARK, PORT219_FN3), - PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4), - PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), - PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2), - PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3), - PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), - PINMUX_DATA(DREQ1_MARK, PORT221_FN2), - PINMUX_DATA(PWEN_MARK, PORT221_FN3), - PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4), - PINMUX_DATA(LCDDON_MARK, PORT222_FN1), - PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), - PINMUX_DATA(DACK1_MARK, PORT222_FN3), - PINMUX_DATA(OVCN_MARK, PORT222_FN4), - PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5), - PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1), - PINMUX_DATA(OVCN2_MARK, PORT225_FN2), - PINMUX_DATA(EXTLP_MARK, PORT226_FN1), - PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), - PINMUX_DATA(USBTERM_MARK, PORT226_FN3), - PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4), - PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1), - PINMUX_DATA(IDIN_MARK, PORT227_FN2), - PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1), - PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1), - PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2), - PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), - PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2), - PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3), - PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), - PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2), - PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3), - PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), - PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2), - PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3), - PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), - PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2), - PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3), - PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), - PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2), - PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), - PINMUX_DATA(OPORT0_MARK, PORT235_FN2), - PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), - PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), - PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2), - PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), - PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2), - PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3), - PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), - PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2), - - /* 55-5 (FN) */ - PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), - PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1), - PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1), - PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), - PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), - PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4), - PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1), - PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2), - PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1), - PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2), - PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1), - PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), - PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3), - PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1), - PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), - PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3), - PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1), - PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), - PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3), - PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4), - PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1), - PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), - PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3), - PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4), - PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1), - PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), - PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3), - PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), - PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), - PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), - PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1), - PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2), - PINMUX_DATA(SDHICD0_MARK, PORT251_FN1), - PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1), - PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2), - PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1), - PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2), - PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1), - PINMUX_DATA(TDI2_MARK, PORT254_FN2), - PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1), - PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2), - PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1), - PINMUX_DATA(TRST2_MARK, PORT256_FN2), - PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1), - PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2), - PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1), - PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2), - PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), - PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2), - PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3), - PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4), - PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), - PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2), - PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3), - PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4), - PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), - PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2), - PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3), - PINMUX_DATA(TDI3_MARK, PORT261_FN4), - PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), - PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2), - PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3), - PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4), - PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1), - PINMUX_DATA(TRST3_MARK, PORT263_FN2), - PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - /* 55-1 -> 55-5 (GPIO) */ - GPIO_PORT_ALL(), - - /* Special Pull-up / Pull-down Functions */ - GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU), - GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU), - GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU), - GPIO_FN(PORT72_KEYIN6_PU), - - /* 55-1 (FN) */ - GPIO_FN(VBUS_0), - GPIO_FN(CPORT0), - GPIO_FN(CPORT1), - GPIO_FN(CPORT2), - GPIO_FN(CPORT3), - GPIO_FN(CPORT4), - GPIO_FN(CPORT5), - GPIO_FN(CPORT6), - GPIO_FN(CPORT7), - GPIO_FN(CPORT8), - GPIO_FN(CPORT9), - GPIO_FN(CPORT10), - GPIO_FN(CPORT11), GPIO_FN(SIN2), - GPIO_FN(CPORT12), GPIO_FN(XCTS2), - GPIO_FN(CPORT13), GPIO_FN(RFSPO4), - GPIO_FN(CPORT14), GPIO_FN(RFSPO5), - GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2), - GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3), - GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2), - GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2), - GPIO_FN(CPORT19_MPORT1), - GPIO_FN(CPORT20), GPIO_FN(RFSPO6), - GPIO_FN(CPORT21), GPIO_FN(STATUS0), - GPIO_FN(CPORT22), GPIO_FN(STATUS1), - GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7), - GPIO_FN(B_SYNLD1), - GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK), - GPIO_FN(XMAINPS), - GPIO_FN(XDIVPS), - GPIO_FN(XIDRST), - GPIO_FN(IDCLK), GPIO_FN(IC_DP), - GPIO_FN(IDIO), GPIO_FN(IC_DM), - GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT), - GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP), - GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK), - GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS), - GPIO_FN(PCMCLKO), - GPIO_FN(SYNC8KO), - - /* 55-2 (FN) */ - GPIO_FN(DNPCM_A), - GPIO_FN(UPPCM_A), - GPIO_FN(VACK), - GPIO_FN(XTALB1L), - GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS), - GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD), - GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS), - GPIO_FN(GPS_IM), - GPIO_FN(GPS_IS), - GPIO_FN(GPS_QM), - GPIO_FN(GPS_QS), - GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT), - GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2), - GPIO_FN(IPORT3), GPIO_FN(FMSIOLR), - GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3), - GPIO_FN(OPORT1), GPIO_FN(FMSIOBT), - GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2), - GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3), - GPIO_FN(OPORT3), GPIO_FN(FMSIILR), - GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2), - GPIO_FN(FMSIIBT), - GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0), - GPIO_FN(A0_EA0), GPIO_FN(BS), - GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2), - GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2), - GPIO_FN(TPU0TO1), - GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5), - GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4), - GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1), - GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC), - GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK), - GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD), - GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK), - GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC), - GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0), - GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1), - GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD), - GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2), - GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6), - GPIO_FN(D0_ED0_NAF0), - GPIO_FN(D1_ED1_NAF1), - GPIO_FN(D2_ED2_NAF2), - GPIO_FN(D3_ED3_NAF3), - GPIO_FN(D4_ED4_NAF4), - GPIO_FN(D5_ED5_NAF5), - GPIO_FN(D6_ED6_NAF6), - GPIO_FN(D7_ED7_NAF7), - GPIO_FN(D8_ED8_NAF8), - GPIO_FN(D9_ED9_NAF9), - GPIO_FN(D10_ED10_NAF10), - GPIO_FN(D11_ED11_NAF11), - GPIO_FN(D12_ED12_NAF12), - GPIO_FN(D13_ED13_NAF13), - GPIO_FN(D14_ED14_NAF14), - GPIO_FN(D15_ED15_NAF15), - GPIO_FN(CS4), - GPIO_FN(CS5A), GPIO_FN(FMSICK), - - /* 55-3 (FN) */ - GPIO_FN(CS5B), GPIO_FN(FCE1), - GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0), - GPIO_FN(FCE0), - GPIO_FN(WAIT), GPIO_FN(DREQ0), - GPIO_FN(RD_XRD), - GPIO_FN(WE0_XWR0_FWE), - GPIO_FN(WE1_XWR1), - GPIO_FN(FRB), - GPIO_FN(CKO), - GPIO_FN(NBRSTOUT), - GPIO_FN(NBRST), - GPIO_FN(GPS_EPPSIN), - GPIO_FN(LATCHPULSE), - GPIO_FN(LTESIGNAL), - GPIO_FN(LEGACYSTATE), - GPIO_FN(TCKON), - GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0), - GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1), - GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD), - GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1), - GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2), - GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5), - GPIO_FN(PORT133_MSIOF2_TSYNC), - GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD), - GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK), - GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2), - GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3), - GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC), - GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR), - GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2), - GPIO_FN(PORT140_FSIAOBT), - GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3), - GPIO_FN(PORT141_FSIAOSLD), - GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK), - GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR), - GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT), - GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD), - GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2), - GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5), - GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6), - GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1), - GPIO_FN(MFG0_IN2), - GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK), - GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1), - GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0), - GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1), - GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2), - GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD), - - /* 55-4 (FN) */ - GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3), - GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI), - GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0), - GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0), - GPIO_FN(MFG3_IN2), - GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0), - GPIO_FN(MFG3_IN1), - GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0), - GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0), - GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI), - GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS), - GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS), - GPIO_FN(BBIF2_TSCK1), - GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD), - GPIO_FN(BBIF2_TXD1), - GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD), - GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK), - GPIO_FN(MFG2_OUT2), - GPIO_FN(LCDD6), - GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2), - GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0), - GPIO_FN(D16), - GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1), - GPIO_FN(D17), - GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2), - GPIO_FN(D18), - GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3), - GPIO_FN(D19), - GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4), - GPIO_FN(D20), - GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5), - GPIO_FN(D21), - GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6), - GPIO_FN(D22), - GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0), - GPIO_FN(VIO_DR7), GPIO_FN(D23), - GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1), - GPIO_FN(VIO_VDR), GPIO_FN(D24), - GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR), - GPIO_FN(D25), - GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1), - GPIO_FN(D26), - GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27), - GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0), - GPIO_FN(D28), - GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1), - GPIO_FN(D29), - GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK), - GPIO_FN(D30), - GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC), - GPIO_FN(D31), - GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3), - GPIO_FN(VIO_CLKR), - GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC), - GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3), - GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4), - GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK), - GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5), - GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD), - GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN), - GPIO_FN(MSIOF0L_TXD), - GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2), - GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM), - GPIO_FN(PORT226_VIO_CKO2), - GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN), - GPIO_FN(SCIFA1_RXD), - GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1), - GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC), - GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR), - GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT), - GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG), - GPIO_FN(PORT233_FSIACK), - GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD), - GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2), - GPIO_FN(PORT235_FSIAILR), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT), - GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD), - GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3), - - /* 55-5 (FN) */ - GPIO_FN(MSIOF1_SS2), - GPIO_FN(SCIFA6_TXD), - GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1), - GPIO_FN(TPU4TO0), - GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2), - GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2), - GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1), - GPIO_FN(PORT244_SCIFB_CTS), - GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2), - GPIO_FN(PORT245_SCIFB_RTS), - GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1), - GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0), - GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2), - GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1), - GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1), - GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0), - GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1), - GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0), - GPIO_FN(SDHICD0), - GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0), - GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0), - GPIO_FN(SDHID0_2), GPIO_FN(TDI2), - GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0), - GPIO_FN(SDHICMD0), GPIO_FN(TRST2), - GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2), - GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1), - GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2), - GPIO_FN(TMS3_SWDIO_MC1), - GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2), - GPIO_FN(TDO3_SWO0_MC1), - GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2), - GPIO_FN(TDI3), - GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2), - GPIO_FN(RTCK3_SWO1_MC1), - GPIO_FN(SDHICMD1), GPIO_FN(TRST3), - GPIO_FN(RESETOUTS), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xe6050000), /* PORT0CR */ - PORTCR(1, 0xe6050001), /* PORT1CR */ - PORTCR(2, 0xe6050002), /* PORT2CR */ - PORTCR(3, 0xe6050003), /* PORT3CR */ - PORTCR(4, 0xe6050004), /* PORT4CR */ - PORTCR(5, 0xe6050005), /* PORT5CR */ - PORTCR(6, 0xe6050006), /* PORT6CR */ - PORTCR(7, 0xe6050007), /* PORT7CR */ - PORTCR(8, 0xe6050008), /* PORT8CR */ - PORTCR(9, 0xe6050009), /* PORT9CR */ - - PORTCR(10, 0xe605000a), /* PORT10CR */ - PORTCR(11, 0xe605000b), /* PORT11CR */ - PORTCR(12, 0xe605000c), /* PORT12CR */ - PORTCR(13, 0xe605000d), /* PORT13CR */ - PORTCR(14, 0xe605000e), /* PORT14CR */ - PORTCR(15, 0xe605000f), /* PORT15CR */ - PORTCR(16, 0xe6050010), /* PORT16CR */ - PORTCR(17, 0xe6050011), /* PORT17CR */ - PORTCR(18, 0xe6050012), /* PORT18CR */ - PORTCR(19, 0xe6050013), /* PORT19CR */ - - PORTCR(20, 0xe6050014), /* PORT20CR */ - PORTCR(21, 0xe6050015), /* PORT21CR */ - PORTCR(22, 0xe6050016), /* PORT22CR */ - PORTCR(23, 0xe6050017), /* PORT23CR */ - PORTCR(24, 0xe6050018), /* PORT24CR */ - PORTCR(25, 0xe6050019), /* PORT25CR */ - PORTCR(26, 0xe605001a), /* PORT26CR */ - PORTCR(27, 0xe605001b), /* PORT27CR */ - PORTCR(28, 0xe605001c), /* PORT28CR */ - PORTCR(29, 0xe605001d), /* PORT29CR */ - - PORTCR(30, 0xe605001e), /* PORT30CR */ - PORTCR(31, 0xe605001f), /* PORT31CR */ - PORTCR(32, 0xe6050020), /* PORT32CR */ - PORTCR(33, 0xe6050021), /* PORT33CR */ - PORTCR(34, 0xe6050022), /* PORT34CR */ - PORTCR(35, 0xe6050023), /* PORT35CR */ - PORTCR(36, 0xe6050024), /* PORT36CR */ - PORTCR(37, 0xe6050025), /* PORT37CR */ - PORTCR(38, 0xe6050026), /* PORT38CR */ - PORTCR(39, 0xe6050027), /* PORT39CR */ - - PORTCR(40, 0xe6050028), /* PORT40CR */ - PORTCR(41, 0xe6050029), /* PORT41CR */ - PORTCR(42, 0xe605002a), /* PORT42CR */ - PORTCR(43, 0xe605002b), /* PORT43CR */ - PORTCR(44, 0xe605002c), /* PORT44CR */ - PORTCR(45, 0xe605002d), /* PORT45CR */ - PORTCR(46, 0xe605002e), /* PORT46CR */ - PORTCR(47, 0xe605002f), /* PORT47CR */ - PORTCR(48, 0xe6050030), /* PORT48CR */ - PORTCR(49, 0xe6050031), /* PORT49CR */ - - PORTCR(50, 0xe6050032), /* PORT50CR */ - PORTCR(51, 0xe6050033), /* PORT51CR */ - PORTCR(52, 0xe6050034), /* PORT52CR */ - PORTCR(53, 0xe6050035), /* PORT53CR */ - PORTCR(54, 0xe6050036), /* PORT54CR */ - PORTCR(55, 0xe6050037), /* PORT55CR */ - PORTCR(56, 0xe6050038), /* PORT56CR */ - PORTCR(57, 0xe6050039), /* PORT57CR */ - PORTCR(58, 0xe605003a), /* PORT58CR */ - PORTCR(59, 0xe605003b), /* PORT59CR */ - - PORTCR(60, 0xe605003c), /* PORT60CR */ - PORTCR(61, 0xe605003d), /* PORT61CR */ - PORTCR(62, 0xe605003e), /* PORT62CR */ - PORTCR(63, 0xe605003f), /* PORT63CR */ - PORTCR(64, 0xe6050040), /* PORT64CR */ - PORTCR(65, 0xe6050041), /* PORT65CR */ - PORTCR(66, 0xe6050042), /* PORT66CR */ - PORTCR(67, 0xe6050043), /* PORT67CR */ - PORTCR(68, 0xe6050044), /* PORT68CR */ - PORTCR(69, 0xe6050045), /* PORT69CR */ - - PORTCR(70, 0xe6050046), /* PORT70CR */ - PORTCR(71, 0xe6050047), /* PORT71CR */ - PORTCR(72, 0xe6050048), /* PORT72CR */ - PORTCR(73, 0xe6050049), /* PORT73CR */ - PORTCR(74, 0xe605004a), /* PORT74CR */ - PORTCR(75, 0xe605004b), /* PORT75CR */ - PORTCR(76, 0xe605004c), /* PORT76CR */ - PORTCR(77, 0xe605004d), /* PORT77CR */ - PORTCR(78, 0xe605004e), /* PORT78CR */ - PORTCR(79, 0xe605004f), /* PORT79CR */ - - PORTCR(80, 0xe6050050), /* PORT80CR */ - PORTCR(81, 0xe6050051), /* PORT81CR */ - PORTCR(82, 0xe6050052), /* PORT82CR */ - PORTCR(83, 0xe6050053), /* PORT83CR */ - PORTCR(84, 0xe6050054), /* PORT84CR */ - PORTCR(85, 0xe6050055), /* PORT85CR */ - PORTCR(86, 0xe6050056), /* PORT86CR */ - PORTCR(87, 0xe6050057), /* PORT87CR */ - PORTCR(88, 0xe6050058), /* PORT88CR */ - PORTCR(89, 0xe6050059), /* PORT89CR */ - - PORTCR(90, 0xe605005a), /* PORT90CR */ - PORTCR(91, 0xe605005b), /* PORT91CR */ - PORTCR(92, 0xe605005c), /* PORT92CR */ - PORTCR(93, 0xe605005d), /* PORT93CR */ - PORTCR(94, 0xe605005e), /* PORT94CR */ - PORTCR(95, 0xe605005f), /* PORT95CR */ - PORTCR(96, 0xe6050060), /* PORT96CR */ - PORTCR(97, 0xe6050061), /* PORT97CR */ - PORTCR(98, 0xe6050062), /* PORT98CR */ - PORTCR(99, 0xe6050063), /* PORT99CR */ - - PORTCR(100, 0xe6050064), /* PORT100CR */ - PORTCR(101, 0xe6050065), /* PORT101CR */ - PORTCR(102, 0xe6050066), /* PORT102CR */ - PORTCR(103, 0xe6050067), /* PORT103CR */ - PORTCR(104, 0xe6050068), /* PORT104CR */ - PORTCR(105, 0xe6050069), /* PORT105CR */ - PORTCR(106, 0xe605006a), /* PORT106CR */ - PORTCR(107, 0xe605006b), /* PORT107CR */ - PORTCR(108, 0xe605006c), /* PORT108CR */ - PORTCR(109, 0xe605006d), /* PORT109CR */ - - PORTCR(110, 0xe605006e), /* PORT110CR */ - PORTCR(111, 0xe605006f), /* PORT111CR */ - PORTCR(112, 0xe6050070), /* PORT112CR */ - PORTCR(113, 0xe6050071), /* PORT113CR */ - PORTCR(114, 0xe6050072), /* PORT114CR */ - PORTCR(115, 0xe6050073), /* PORT115CR */ - PORTCR(116, 0xe6050074), /* PORT116CR */ - PORTCR(117, 0xe6050075), /* PORT117CR */ - PORTCR(118, 0xe6050076), /* PORT118CR */ - - PORTCR(128, 0xe6051080), /* PORT128CR */ - PORTCR(129, 0xe6051081), /* PORT129CR */ - - PORTCR(130, 0xe6051082), /* PORT130CR */ - PORTCR(131, 0xe6051083), /* PORT131CR */ - PORTCR(132, 0xe6051084), /* PORT132CR */ - PORTCR(133, 0xe6051085), /* PORT133CR */ - PORTCR(134, 0xe6051086), /* PORT134CR */ - PORTCR(135, 0xe6051087), /* PORT135CR */ - PORTCR(136, 0xe6051088), /* PORT136CR */ - PORTCR(137, 0xe6051089), /* PORT137CR */ - PORTCR(138, 0xe605108a), /* PORT138CR */ - PORTCR(139, 0xe605108b), /* PORT139CR */ - - PORTCR(140, 0xe605108c), /* PORT140CR */ - PORTCR(141, 0xe605108d), /* PORT141CR */ - PORTCR(142, 0xe605108e), /* PORT142CR */ - PORTCR(143, 0xe605108f), /* PORT143CR */ - PORTCR(144, 0xe6051090), /* PORT144CR */ - PORTCR(145, 0xe6051091), /* PORT145CR */ - PORTCR(146, 0xe6051092), /* PORT146CR */ - PORTCR(147, 0xe6051093), /* PORT147CR */ - PORTCR(148, 0xe6051094), /* PORT148CR */ - PORTCR(149, 0xe6051095), /* PORT149CR */ - - PORTCR(150, 0xe6051096), /* PORT150CR */ - PORTCR(151, 0xe6051097), /* PORT151CR */ - PORTCR(152, 0xe6051098), /* PORT152CR */ - PORTCR(153, 0xe6051099), /* PORT153CR */ - PORTCR(154, 0xe605109a), /* PORT154CR */ - PORTCR(155, 0xe605109b), /* PORT155CR */ - PORTCR(156, 0xe605109c), /* PORT156CR */ - PORTCR(157, 0xe605109d), /* PORT157CR */ - PORTCR(158, 0xe605109e), /* PORT158CR */ - PORTCR(159, 0xe605109f), /* PORT159CR */ - - PORTCR(160, 0xe60510a0), /* PORT160CR */ - PORTCR(161, 0xe60510a1), /* PORT161CR */ - PORTCR(162, 0xe60510a2), /* PORT162CR */ - PORTCR(163, 0xe60510a3), /* PORT163CR */ - PORTCR(164, 0xe60510a4), /* PORT164CR */ - - PORTCR(192, 0xe60520c0), /* PORT192CR */ - PORTCR(193, 0xe60520c1), /* PORT193CR */ - PORTCR(194, 0xe60520c2), /* PORT194CR */ - PORTCR(195, 0xe60520c3), /* PORT195CR */ - PORTCR(196, 0xe60520c4), /* PORT196CR */ - PORTCR(197, 0xe60520c5), /* PORT197CR */ - PORTCR(198, 0xe60520c6), /* PORT198CR */ - PORTCR(199, 0xe60520c7), /* PORT199CR */ - - PORTCR(200, 0xe60520c8), /* PORT200CR */ - PORTCR(201, 0xe60520c9), /* PORT201CR */ - PORTCR(202, 0xe60520ca), /* PORT202CR */ - PORTCR(203, 0xe60520cb), /* PORT203CR */ - PORTCR(204, 0xe60520cc), /* PORT204CR */ - PORTCR(205, 0xe60520cd), /* PORT205CR */ - PORTCR(206, 0xe60520ce), /* PORT206CR */ - PORTCR(207, 0xe60520cf), /* PORT207CR */ - PORTCR(208, 0xe60520d0), /* PORT208CR */ - PORTCR(209, 0xe60520d1), /* PORT209CR */ - - PORTCR(210, 0xe60520d2), /* PORT210CR */ - PORTCR(211, 0xe60520d3), /* PORT211CR */ - PORTCR(212, 0xe60520d4), /* PORT212CR */ - PORTCR(213, 0xe60520d5), /* PORT213CR */ - PORTCR(214, 0xe60520d6), /* PORT214CR */ - PORTCR(215, 0xe60520d7), /* PORT215CR */ - PORTCR(216, 0xe60520d8), /* PORT216CR */ - PORTCR(217, 0xe60520d9), /* PORT217CR */ - PORTCR(218, 0xe60520da), /* PORT218CR */ - PORTCR(219, 0xe60520db), /* PORT219CR */ - - PORTCR(220, 0xe60520dc), /* PORT220CR */ - PORTCR(221, 0xe60520dd), /* PORT221CR */ - PORTCR(222, 0xe60520de), /* PORT222CR */ - PORTCR(223, 0xe60520df), /* PORT223CR */ - PORTCR(224, 0xe60520e0), /* PORT224CR */ - PORTCR(225, 0xe60520e1), /* PORT225CR */ - PORTCR(226, 0xe60520e2), /* PORT226CR */ - PORTCR(227, 0xe60520e3), /* PORT227CR */ - PORTCR(228, 0xe60520e4), /* PORT228CR */ - PORTCR(229, 0xe60520e5), /* PORT229CR */ - - PORTCR(230, 0xe60520e6), /* PORT230CR */ - PORTCR(231, 0xe60520e7), /* PORT231CR */ - PORTCR(232, 0xe60520e8), /* PORT232CR */ - PORTCR(233, 0xe60520e9), /* PORT233CR */ - PORTCR(234, 0xe60520ea), /* PORT234CR */ - PORTCR(235, 0xe60520eb), /* PORT235CR */ - PORTCR(236, 0xe60520ec), /* PORT236CR */ - PORTCR(237, 0xe60520ed), /* PORT237CR */ - PORTCR(238, 0xe60520ee), /* PORT238CR */ - PORTCR(239, 0xe60520ef), /* PORT239CR */ - - PORTCR(240, 0xe60520f0), /* PORT240CR */ - PORTCR(241, 0xe60520f1), /* PORT241CR */ - PORTCR(242, 0xe60520f2), /* PORT242CR */ - PORTCR(243, 0xe60520f3), /* PORT243CR */ - PORTCR(244, 0xe60520f4), /* PORT244CR */ - PORTCR(245, 0xe60520f5), /* PORT245CR */ - PORTCR(246, 0xe60520f6), /* PORT246CR */ - PORTCR(247, 0xe60520f7), /* PORT247CR */ - PORTCR(248, 0xe60520f8), /* PORT248CR */ - PORTCR(249, 0xe60520f9), /* PORT249CR */ - - PORTCR(250, 0xe60520fa), /* PORT250CR */ - PORTCR(251, 0xe60520fb), /* PORT251CR */ - PORTCR(252, 0xe60520fc), /* PORT252CR */ - PORTCR(253, 0xe60520fd), /* PORT253CR */ - PORTCR(254, 0xe60520fe), /* PORT254CR */ - PORTCR(255, 0xe60520ff), /* PORT255CR */ - PORTCR(256, 0xe6052100), /* PORT256CR */ - PORTCR(257, 0xe6052101), /* PORT257CR */ - PORTCR(258, 0xe6052102), /* PORT258CR */ - PORTCR(259, 0xe6052103), /* PORT259CR */ - - PORTCR(260, 0xe6052104), /* PORT260CR */ - PORTCR(261, 0xe6052105), /* PORT261CR */ - PORTCR(262, 0xe6052106), /* PORT262CR */ - PORTCR(263, 0xe6052107), /* PORT263CR */ - PORTCR(264, 0xe6052108), /* PORT264CR */ - - { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - MSELBCR_MSEL17_0, MSELBCR_MSEL17_1, - MSELBCR_MSEL16_0, MSELBCR_MSEL16_1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } - }, - { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } - }, - { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } - }, - { PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } - }, - { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } - }, - { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) { - PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, - PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, - PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, - PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, - PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, - PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, - PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, - PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } - }, - { PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) { - PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, - PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, - PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, - PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, - PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, - PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, - PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, - PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } - }, - { PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT264_DATA, - PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, - PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } - }, - { }, -}; - -static struct pinmux_info sh7377_pinmux_info = { - .name = "sh7377_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_RESETOUTS, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), -}; - -void sh7377_pinmux_init(void) -{ - register_pinmux(&sh7377_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 11bb1d984197..095222469d03 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -66,12 +66,6 @@ static struct map_desc r8a7740_io_desc[] __initdata = { void __init r8a7740_map_io(void) { iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); - - /* - * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't - * enough to allocate the frame buffer memory. - */ - init_consistent_dma_size(12 << 20); } /* SCIFA0 */ @@ -590,6 +584,21 @@ static struct platform_device i2c1_device = { .num_resources = ARRAY_SIZE(i2c1_resources), }; +static struct resource pmu_resources[] = { + [0] = { + .start = evt2irq(0x19a0), + .end = evt2irq(0x19a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = -1, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static struct platform_device *r8a7740_late_devices[] __initdata = { &i2c0_device, &i2c1_device, @@ -597,6 +606,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = { &dma1_device, &dma2_device, &usb_dma_device, + &pmu_device, }; /* @@ -747,7 +757,7 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { NULL, }; -DT_MACHINE_START(SH7372_DT, "Generic R8A7740 (Flattened Device Tree)") +DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, .init_early = r8a7740_add_early_devices_dt, .init_irq = r8a7740_init_irq, diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index ebbffc25f24f..7a1ad4f38539 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -229,6 +229,79 @@ static struct platform_device tmu01_device = { .num_resources = ARRAY_SIZE(tmu01_resources), }; +/* I2C */ +static struct resource rcar_i2c0_res[] = { + { + .start = 0xffc70000, + .end = 0xffc70fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(79), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c0_device = { + .name = "i2c-rcar", + .id = 0, + .resource = rcar_i2c0_res, + .num_resources = ARRAY_SIZE(rcar_i2c0_res), +}; + +static struct resource rcar_i2c1_res[] = { + { + .start = 0xffc71000, + .end = 0xffc71fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(82), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c1_device = { + .name = "i2c-rcar", + .id = 1, + .resource = rcar_i2c1_res, + .num_resources = ARRAY_SIZE(rcar_i2c1_res), +}; + +static struct resource rcar_i2c2_res[] = { + { + .start = 0xffc72000, + .end = 0xffc72fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c2_device = { + .name = "i2c-rcar", + .id = 2, + .resource = rcar_i2c2_res, + .num_resources = ARRAY_SIZE(rcar_i2c2_res), +}; + +static struct resource rcar_i2c3_res[] = { + { + .start = 0xffc73000, + .end = 0xffc73fff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_spi(81), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c3_device = { + .name = "i2c-rcar", + .id = 3, + .resource = rcar_i2c3_res, + .num_resources = ARRAY_SIZE(rcar_i2c3_res), +}; + static struct platform_device *r8a7779_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -238,6 +311,10 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, + &i2c0_device, + &i2c1_device, + &i2c2_device, + &i2c3_device, }; static struct platform_device *r8a7779_late_devices[] __initdata = { diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c deleted file mode 100644 index e647f5410879..000000000000 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ /dev/null @@ -1,481 +0,0 @@ -/* - * sh7367 processor support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/uio_driver.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/serial_sci.h> -#include <linux/sh_timer.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -static struct map_desc sh7367_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -void __init sh7367_map_io(void) -{ - iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc)); -} - -/* SCIFA0 */ -static struct plat_sci_port scif0_platform_data = { - .mapbase = 0xe6c40000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc00), evt2irq(0xc00), - evt2irq(0xc00), evt2irq(0xc00) }, -}; - -static struct platform_device scif0_device = { - .name = "sh-sci", - .id = 0, - .dev = { - .platform_data = &scif0_platform_data, - }, -}; - -/* SCIFA1 */ -static struct plat_sci_port scif1_platform_data = { - .mapbase = 0xe6c50000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc20), evt2irq(0xc20), - evt2irq(0xc20), evt2irq(0xc20) }, -}; - -static struct platform_device scif1_device = { - .name = "sh-sci", - .id = 1, - .dev = { - .platform_data = &scif1_platform_data, - }, -}; - -/* SCIFA2 */ -static struct plat_sci_port scif2_platform_data = { - .mapbase = 0xe6c60000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc40), evt2irq(0xc40), - evt2irq(0xc40), evt2irq(0xc40) }, -}; - -static struct platform_device scif2_device = { - .name = "sh-sci", - .id = 2, - .dev = { - .platform_data = &scif2_platform_data, - }, -}; - -/* SCIFA3 */ -static struct plat_sci_port scif3_platform_data = { - .mapbase = 0xe6c70000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc60), evt2irq(0xc60), - evt2irq(0xc60), evt2irq(0xc60) }, -}; - -static struct platform_device scif3_device = { - .name = "sh-sci", - .id = 3, - .dev = { - .platform_data = &scif3_platform_data, - }, -}; - -/* SCIFA4 */ -static struct plat_sci_port scif4_platform_data = { - .mapbase = 0xe6c80000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd20), evt2irq(0xd20), - evt2irq(0xd20), evt2irq(0xd20) }, -}; - -static struct platform_device scif4_device = { - .name = "sh-sci", - .id = 4, - .dev = { - .platform_data = &scif4_platform_data, - }, -}; - -/* SCIFA5 */ -static struct plat_sci_port scif5_platform_data = { - .mapbase = 0xe6cb0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd40), evt2irq(0xd40), - evt2irq(0xd40), evt2irq(0xd40) }, -}; - -static struct platform_device scif5_device = { - .name = "sh-sci", - .id = 5, - .dev = { - .platform_data = &scif5_platform_data, - }, -}; - -/* SCIFB */ -static struct plat_sci_port scif6_platform_data = { - .mapbase = 0xe6c30000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFB, - .irqs = { evt2irq(0xd60), evt2irq(0xd60), - evt2irq(0xd60), evt2irq(0xd60) }, -}; - -static struct platform_device scif6_device = { - .name = "sh-sci", - .id = 6, - .dev = { - .platform_data = &scif6_platform_data, - }, -}; - -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, -}; - -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xb00), /* CMT1_CMT10 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, - .dev = { - .platform_data = &cmt10_platform_data, - }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), -}; - -/* VPU */ -static struct uio_info vpu_platform_data = { - .name = "VPU5", - .version = "0", - .irq = intcs_evt2irq(0x980), -}; - -static struct resource vpu_resources[] = { - [0] = { - .name = "VPU", - .start = 0xfe900000, - .end = 0xfe902807, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device vpu_device = { - .name = "uio_pdrv_genirq", - .id = 0, - .dev = { - .platform_data = &vpu_platform_data, - }, - .resource = vpu_resources, - .num_resources = ARRAY_SIZE(vpu_resources), -}; - -/* VEU0 */ -static struct uio_info veu0_platform_data = { - .name = "VEU0", - .version = "0", - .irq = intcs_evt2irq(0x700), -}; - -static struct resource veu0_resources[] = { - [0] = { - .name = "VEU0", - .start = 0xfe920000, - .end = 0xfe9200b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu0_device = { - .name = "uio_pdrv_genirq", - .id = 1, - .dev = { - .platform_data = &veu0_platform_data, - }, - .resource = veu0_resources, - .num_resources = ARRAY_SIZE(veu0_resources), -}; - -/* VEU1 */ -static struct uio_info veu1_platform_data = { - .name = "VEU1", - .version = "0", - .irq = intcs_evt2irq(0x720), -}; - -static struct resource veu1_resources[] = { - [0] = { - .name = "VEU1", - .start = 0xfe924000, - .end = 0xfe9240b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu1_device = { - .name = "uio_pdrv_genirq", - .id = 2, - .dev = { - .platform_data = &veu1_platform_data, - }, - .resource = veu1_resources, - .num_resources = ARRAY_SIZE(veu1_resources), -}; - -/* VEU2 */ -static struct uio_info veu2_platform_data = { - .name = "VEU2", - .version = "0", - .irq = intcs_evt2irq(0x740), -}; - -static struct resource veu2_resources[] = { - [0] = { - .name = "VEU2", - .start = 0xfe928000, - .end = 0xfe9280b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2_device = { - .name = "uio_pdrv_genirq", - .id = 3, - .dev = { - .platform_data = &veu2_platform_data, - }, - .resource = veu2_resources, - .num_resources = ARRAY_SIZE(veu2_resources), -}; - -/* VEU3 */ -static struct uio_info veu3_platform_data = { - .name = "VEU3", - .version = "0", - .irq = intcs_evt2irq(0x760), -}; - -static struct resource veu3_resources[] = { - [0] = { - .name = "VEU3", - .start = 0xfe92c000, - .end = 0xfe92c0b7, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu3_device = { - .name = "uio_pdrv_genirq", - .id = 4, - .dev = { - .platform_data = &veu3_platform_data, - }, - .resource = veu3_resources, - .num_resources = ARRAY_SIZE(veu3_resources), -}; - -/* VEU2H */ -static struct uio_info veu2h_platform_data = { - .name = "VEU2H", - .version = "0", - .irq = intcs_evt2irq(0x520), -}; - -static struct resource veu2h_resources[] = { - [0] = { - .name = "VEU2H", - .start = 0xfe93c000, - .end = 0xfe93c27b, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2h_device = { - .name = "uio_pdrv_genirq", - .id = 5, - .dev = { - .platform_data = &veu2h_platform_data, - }, - .resource = veu2h_resources, - .num_resources = ARRAY_SIZE(veu2h_resources), -}; - -/* JPU */ -static struct uio_info jpu_platform_data = { - .name = "JPU", - .version = "0", - .irq = intcs_evt2irq(0x560), -}; - -static struct resource jpu_resources[] = { - [0] = { - .name = "JPU", - .start = 0xfe980000, - .end = 0xfe9902d3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device jpu_device = { - .name = "uio_pdrv_genirq", - .id = 6, - .dev = { - .platform_data = &jpu_platform_data, - }, - .resource = jpu_resources, - .num_resources = ARRAY_SIZE(jpu_resources), -}; - -/* SPU1 */ -static struct uio_info spu1_platform_data = { - .name = "SPU1", - .version = "0", - .irq = evt2irq(0xfc0), -}; - -static struct resource spu1_resources[] = { - [0] = { - .name = "SPU1", - .start = 0xfe300000, - .end = 0xfe3fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu1_device = { - .name = "uio_pdrv_genirq", - .id = 7, - .dev = { - .platform_data = &spu1_platform_data, - }, - .resource = spu1_resources, - .num_resources = ARRAY_SIZE(spu1_resources), -}; - -static struct platform_device *sh7367_early_devices[] __initdata = { - &scif0_device, - &scif1_device, - &scif2_device, - &scif3_device, - &scif4_device, - &scif5_device, - &scif6_device, - &cmt10_device, -}; - -static struct platform_device *sh7367_devices[] __initdata = { - &vpu_device, - &veu0_device, - &veu1_device, - &veu2_device, - &veu3_device, - &veu2h_device, - &jpu_device, - &spu1_device, -}; - -void __init sh7367_add_standard_devices(void) -{ - platform_add_devices(sh7367_early_devices, - ARRAY_SIZE(sh7367_early_devices)); - - platform_add_devices(sh7367_devices, - ARRAY_SIZE(sh7367_devices)); -} - -static void __init sh7367_earlytimer_init(void) -{ - sh7367_clock_init(); - shmobile_earlytimer_init(); -} - -#define SYMSTPCR2 IOMEM(0xe6158048) -#define SYMSTPCR2_CMT1 (1 << 29) - -void __init sh7367_add_early_devices(void) -{ - /* enable clock to CMT1 */ - __raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2); - - early_platform_add_devices(sh7367_early_devices, - ARRAY_SIZE(sh7367_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); - - /* override timer setup with soc-specific code */ - shmobile_timer.init = sh7367_earlytimer_init; -} diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index a07954fbcd22..c917882424a7 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -58,12 +58,6 @@ static struct map_desc sh7372_io_desc[] __initdata = { void __init sh7372_map_io(void) { iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc)); - - /* - * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't - * enough to allocate the frame buffer memory. - */ - init_consistent_dma_size(12 << 20); } /* SCIFA0 */ @@ -408,6 +402,26 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { .chcr = CHCR_RX(XMIT_SZ_8BIT), .mid_rid = 0x3e, }, { + .slave_id = SHDMA_SLAVE_FLCTL0_TX, + .addr = 0xe6a30050, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0x83, + }, { + .slave_id = SHDMA_SLAVE_FLCTL0_RX, + .addr = 0xe6a30050, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x83, + }, { + .slave_id = SHDMA_SLAVE_FLCTL1_TX, + .addr = 0xe6a30060, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0x87, + }, { + .slave_id = SHDMA_SLAVE_FLCTL1_RX, + .addr = 0xe6a30060, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0x87, + }, { .slave_id = SHDMA_SLAVE_SDHI0_TX, .addr = 0xe6850030, .chcr = CHCR_TX(XMIT_SZ_16BIT), diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c deleted file mode 100644 index edcf98bb7012..000000000000 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * sh7377 processor support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/of_platform.h> -#include <linux/uio_driver.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/serial_sci.h> -#include <linux/sh_intc.h> -#include <linux/sh_timer.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <asm/mach/map.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -static struct map_desc sh7377_io_desc[] __initdata = { - /* create a 1:1 entity map for 0xe6xxxxxx - * used by CPGA, INTC and PFC. - */ - { - .virtual = 0xe6000000, - .pfn = __phys_to_pfn(0xe6000000), - .length = 256 << 20, - .type = MT_DEVICE_NONSHARED - }, -}; - -void __init sh7377_map_io(void) -{ - iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc)); -} - -/* SCIFA0 */ -static struct plat_sci_port scif0_platform_data = { - .mapbase = 0xe6c40000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc00), evt2irq(0xc00), - evt2irq(0xc00), evt2irq(0xc00) }, -}; - -static struct platform_device scif0_device = { - .name = "sh-sci", - .id = 0, - .dev = { - .platform_data = &scif0_platform_data, - }, -}; - -/* SCIFA1 */ -static struct plat_sci_port scif1_platform_data = { - .mapbase = 0xe6c50000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc20), evt2irq(0xc20), - evt2irq(0xc20), evt2irq(0xc20) }, -}; - -static struct platform_device scif1_device = { - .name = "sh-sci", - .id = 1, - .dev = { - .platform_data = &scif1_platform_data, - }, -}; - -/* SCIFA2 */ -static struct plat_sci_port scif2_platform_data = { - .mapbase = 0xe6c60000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc40), evt2irq(0xc40), - evt2irq(0xc40), evt2irq(0xc40) }, -}; - -static struct platform_device scif2_device = { - .name = "sh-sci", - .id = 2, - .dev = { - .platform_data = &scif2_platform_data, - }, -}; - -/* SCIFA3 */ -static struct plat_sci_port scif3_platform_data = { - .mapbase = 0xe6c70000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xc60), evt2irq(0xc60), - evt2irq(0xc60), evt2irq(0xc60) }, -}; - -static struct platform_device scif3_device = { - .name = "sh-sci", - .id = 3, - .dev = { - .platform_data = &scif3_platform_data, - }, -}; - -/* SCIFA4 */ -static struct plat_sci_port scif4_platform_data = { - .mapbase = 0xe6c80000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd20), evt2irq(0xd20), - evt2irq(0xd20), evt2irq(0xd20) }, -}; - -static struct platform_device scif4_device = { - .name = "sh-sci", - .id = 4, - .dev = { - .platform_data = &scif4_platform_data, - }, -}; - -/* SCIFA5 */ -static struct plat_sci_port scif5_platform_data = { - .mapbase = 0xe6cb0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { evt2irq(0xd40), evt2irq(0xd40), - evt2irq(0xd40), evt2irq(0xd40) }, -}; - -static struct platform_device scif5_device = { - .name = "sh-sci", - .id = 5, - .dev = { - .platform_data = &scif5_platform_data, - }, -}; - -/* SCIFA6 */ -static struct plat_sci_port scif6_platform_data = { - .mapbase = 0xe6cc0000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFA, - .irqs = { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80), - intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) }, -}; - -static struct platform_device scif6_device = { - .name = "sh-sci", - .id = 6, - .dev = { - .platform_data = &scif6_platform_data, - }, -}; - -/* SCIFB */ -static struct plat_sci_port scif7_platform_data = { - .mapbase = 0xe6c30000, - .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE, - .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIFB, - .irqs = { evt2irq(0xd60), evt2irq(0xd60), - evt2irq(0xd60), evt2irq(0xd60) }, -}; - -static struct platform_device scif7_device = { - .name = "sh-sci", - .id = 7, - .dev = { - .platform_data = &scif7_platform_data, - }, -}; - -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, -}; - -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xb00), /* CMT1_CMT10 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, - .dev = { - .platform_data = &cmt10_platform_data, - }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), -}; - -/* VPU */ -static struct uio_info vpu_platform_data = { - .name = "VPU5HG", - .version = "0", - .irq = intcs_evt2irq(0x980), -}; - -static struct resource vpu_resources[] = { - [0] = { - .name = "VPU", - .start = 0xfe900000, - .end = 0xfe900157, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device vpu_device = { - .name = "uio_pdrv_genirq", - .id = 0, - .dev = { - .platform_data = &vpu_platform_data, - }, - .resource = vpu_resources, - .num_resources = ARRAY_SIZE(vpu_resources), -}; - -/* VEU0 */ -static struct uio_info veu0_platform_data = { - .name = "VEU0", - .version = "0", - .irq = intcs_evt2irq(0x700), -}; - -static struct resource veu0_resources[] = { - [0] = { - .name = "VEU0", - .start = 0xfe920000, - .end = 0xfe9200cb, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu0_device = { - .name = "uio_pdrv_genirq", - .id = 1, - .dev = { - .platform_data = &veu0_platform_data, - }, - .resource = veu0_resources, - .num_resources = ARRAY_SIZE(veu0_resources), -}; - -/* VEU1 */ -static struct uio_info veu1_platform_data = { - .name = "VEU1", - .version = "0", - .irq = intcs_evt2irq(0x720), -}; - -static struct resource veu1_resources[] = { - [0] = { - .name = "VEU1", - .start = 0xfe924000, - .end = 0xfe9240cb, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu1_device = { - .name = "uio_pdrv_genirq", - .id = 2, - .dev = { - .platform_data = &veu1_platform_data, - }, - .resource = veu1_resources, - .num_resources = ARRAY_SIZE(veu1_resources), -}; - -/* VEU2 */ -static struct uio_info veu2_platform_data = { - .name = "VEU2", - .version = "0", - .irq = intcs_evt2irq(0x740), -}; - -static struct resource veu2_resources[] = { - [0] = { - .name = "VEU2", - .start = 0xfe928000, - .end = 0xfe928307, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu2_device = { - .name = "uio_pdrv_genirq", - .id = 3, - .dev = { - .platform_data = &veu2_platform_data, - }, - .resource = veu2_resources, - .num_resources = ARRAY_SIZE(veu2_resources), -}; - -/* VEU3 */ -static struct uio_info veu3_platform_data = { - .name = "VEU3", - .version = "0", - .irq = intcs_evt2irq(0x760), -}; - -static struct resource veu3_resources[] = { - [0] = { - .name = "VEU3", - .start = 0xfe92c000, - .end = 0xfe92c307, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device veu3_device = { - .name = "uio_pdrv_genirq", - .id = 4, - .dev = { - .platform_data = &veu3_platform_data, - }, - .resource = veu3_resources, - .num_resources = ARRAY_SIZE(veu3_resources), -}; - -/* JPU */ -static struct uio_info jpu_platform_data = { - .name = "JPU", - .version = "0", - .irq = intcs_evt2irq(0x560), -}; - -static struct resource jpu_resources[] = { - [0] = { - .name = "JPU", - .start = 0xfe980000, - .end = 0xfe9902d3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device jpu_device = { - .name = "uio_pdrv_genirq", - .id = 5, - .dev = { - .platform_data = &jpu_platform_data, - }, - .resource = jpu_resources, - .num_resources = ARRAY_SIZE(jpu_resources), -}; - -/* SPU2DSP0 */ -static struct uio_info spu0_platform_data = { - .name = "SPU2DSP0", - .version = "0", - .irq = evt2irq(0x1800), -}; - -static struct resource spu0_resources[] = { - [0] = { - .name = "SPU2DSP0", - .start = 0xfe200000, - .end = 0xfe2fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu0_device = { - .name = "uio_pdrv_genirq", - .id = 6, - .dev = { - .platform_data = &spu0_platform_data, - }, - .resource = spu0_resources, - .num_resources = ARRAY_SIZE(spu0_resources), -}; - -/* SPU2DSP1 */ -static struct uio_info spu1_platform_data = { - .name = "SPU2DSP1", - .version = "0", - .irq = evt2irq(0x1820), -}; - -static struct resource spu1_resources[] = { - [0] = { - .name = "SPU2DSP1", - .start = 0xfe300000, - .end = 0xfe3fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device spu1_device = { - .name = "uio_pdrv_genirq", - .id = 7, - .dev = { - .platform_data = &spu1_platform_data, - }, - .resource = spu1_resources, - .num_resources = ARRAY_SIZE(spu1_resources), -}; - -static struct platform_device *sh7377_early_devices[] __initdata = { - &scif0_device, - &scif1_device, - &scif2_device, - &scif3_device, - &scif4_device, - &scif5_device, - &scif6_device, - &scif7_device, - &cmt10_device, -}; - -static struct platform_device *sh7377_devices[] __initdata = { - &vpu_device, - &veu0_device, - &veu1_device, - &veu2_device, - &veu3_device, - &jpu_device, - &spu0_device, - &spu1_device, -}; - -void __init sh7377_add_standard_devices(void) -{ - platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - platform_add_devices(sh7377_devices, - ARRAY_SIZE(sh7377_devices)); -} - -static void __init sh7377_earlytimer_init(void) -{ - sh7377_clock_init(); - shmobile_earlytimer_init(); -} - -#define SMSTPCR3 IOMEM(0xe615013c) -#define SMSTPCR3_CMT1 (1 << 29) - -void __init sh7377_add_early_devices(void) -{ - /* enable clock to CMT1 */ - __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3); - - early_platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); - - /* override timer setup with soc-specific code */ - shmobile_timer.init = sh7377_earlytimer_init; -} - -#ifdef CONFIG_USE_OF - -void __init sh7377_add_early_devices_dt(void) -{ - shmobile_setup_delay(600, 1, 3); /* Cortex-A8 @ 600MHz */ - - early_platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - -static const struct of_dev_auxdata sh7377_auxdata_lookup[] __initconst = { - { } -}; - -void __init sh7377_add_standard_devices_dt(void) -{ - /* clocks are setup late during boot in the case of DT */ - sh7377_clock_init(); - - platform_add_devices(sh7377_early_devices, - ARRAY_SIZE(sh7377_early_devices)); - - of_platform_populate(NULL, of_default_bus_match_table, - sh7377_auxdata_lookup, NULL); -} - -static const char *sh7377_boards_compat_dt[] __initdata = { - "renesas,sh7377", - NULL, -}; - -DT_MACHINE_START(SH7377_DT, "Generic SH7377 (Flattened Device Tree)") - .map_io = sh7377_map_io, - .init_early = sh7377_add_early_devices_dt, - .init_irq = sh7377_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = sh7377_add_standard_devices_dt, - .timer = &shmobile_timer, - .dt_compat = sh7377_boards_compat_dt, -MACHINE_END - -#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f67456286280..535426c306bd 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -32,24 +32,8 @@ #define EMEV2_SCU_BASE 0x1e000000 -static DEFINE_SPINLOCK(scu_lock); static void __iomem *scu_base; -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - unsigned long tmp; - - /* we assume this code is running on a different cpu - * than the one that is changing coherency setting */ - spin_lock(&scu_lock); - tmp = readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - writel(tmp, scu_base + 8); - spin_unlock(&scu_lock); - -} - static unsigned int __init emev2_get_core_count(void) { if (!scu_base) { @@ -95,7 +79,7 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base, 0); /* Tell ROM loader about our vector (in headsmp.S) */ emev2_set_boot_vector(__pa(shmobile_secondary_vector)); @@ -106,12 +90,10 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base, 0); } static void __init emev2_smp_init_cpus(void) diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 2ce6af9a6a37..9def0f22bf22 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -61,9 +61,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0xf0000000; } -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); @@ -73,20 +70,6 @@ void __init r8a7779_register_twd(void) } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - static unsigned int __init r8a7779_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); @@ -102,7 +85,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) cpu = cpu_logical_map(cpu); /* disable cache coherency */ - modify_scu_cpu_psr(3 << (cpu * 8), 0); + scu_power_mode(scu_base_addr(), 3); if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -145,7 +128,7 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -158,15 +141,13 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ __raw_writel(__pa(shmobile_secondary_vector), AVECR); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); r8a7779_pm_init(); diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 624f00f70abf..96ddb97babbe 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -41,9 +41,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0xf0000000; } -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); void __init sh73a0_register_twd(void) @@ -52,20 +49,6 @@ void __init sh73a0_register_twd(void) } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - static unsigned int __init sh73a0_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); @@ -83,7 +66,7 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct cpu = cpu_logical_map(cpu); /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, WUPCR); /* wake up */ @@ -95,8 +78,6 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ @@ -104,7 +85,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(__pa(shmobile_secondary_vector), SBAR); /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + scu_power_mode(scu_base_addr(), 0); } static void __init sh73a0_smp_init_cpus(void) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig new file mode 100644 index 000000000000..3fdd0085e306 --- /dev/null +++ b/arch/arm/mach-sunxi/Kconfig @@ -0,0 +1,9 @@ +config ARCH_SUNXI + bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select PINCTRL + select SPARSE_IRQ + select SUNXI_TIMER diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile new file mode 100644 index 000000000000..93bebfc3ff9f --- /dev/null +++ b/arch/arm/mach-sunxi/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_SUNXI) += sunxi.o diff --git a/arch/arm/mach-sunxi/Makefile.boot b/arch/arm/mach-sunxi/Makefile.boot new file mode 100644 index 000000000000..46d4cf0841c0 --- /dev/null +++ b/arch/arm/mach-sunxi/Makefile.boot @@ -0,0 +1 @@ +zreladdr-$(CONFIG_ARCH_SUNXI) += 0x40008000 diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c new file mode 100644 index 000000000000..9be910f7920b --- /dev/null +++ b/arch/arm/mach-sunxi/sunxi.c @@ -0,0 +1,96 @@ +/* + * Device Tree support for Allwinner A1X SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/sunxi_timer.h> + +#include <linux/irqchip/sunxi.h> + +#include <asm/hardware/vic.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "sunxi.h" + +#define WATCHDOG_CTRL_REG 0x00 +#define WATCHDOG_MODE_REG 0x04 + +static void __iomem *wdt_base; + +static void sunxi_setup_restart(void) +{ + struct device_node *np = of_find_compatible_node(NULL, NULL, + "allwinner,sunxi-wdt"); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); +} + +static void sunxi_restart(char mode, const char *cmd) +{ + if (!wdt_base) + return; + + /* Enable timer and set reset bit in the watchdog */ + writel(3, wdt_base + WATCHDOG_MODE_REG); + writel(0xa57 << 1 | 1, wdt_base + WATCHDOG_CTRL_REG); + while(1) { + mdelay(5); + writel(3, wdt_base + WATCHDOG_MODE_REG); + } +} + +static struct map_desc sunxi_io_desc[] __initdata = { + { + .virtual = (unsigned long) SUNXI_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(SUNXI_REGS_PHYS_BASE), + .length = SUNXI_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init sunxi_map_io(void) +{ + iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc)); +} + +static void __init sunxi_dt_init(void) +{ + sunxi_setup_restart(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const sunxi_board_dt_compat[] = { + "allwinner,sun4i", + "allwinner,sun5i", + NULL, +}; + +DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") + .init_machine = sunxi_dt_init, + .map_io = sunxi_map_io, + .init_irq = sunxi_init_irq, + .handle_irq = sunxi_handle_irq, + .restart = sunxi_restart, + .timer = &sunxi_timer, + .dt_compat = sunxi_board_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-sunxi/sunxi.h b/arch/arm/mach-sunxi/sunxi.h new file mode 100644 index 000000000000..33b58712adea --- /dev/null +++ b/arch/arm/mach-sunxi/sunxi.h @@ -0,0 +1,20 @@ +/* + * Generic definitions for Allwinner SunXi SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SUNXI_H +#define __MACH_SUNXI_H + +#define SUNXI_REGS_PHYS_BASE 0x01c00000 +#define SUNXI_REGS_VIRT_BASE IOMEM(0xf1c00000) +#define SUNXI_REGS_SIZE (SZ_2M + SZ_1M) + +#endif /* __MACH_SUNXI_H */ diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 9aa653b3eb32..0979e8bba78a 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,15 +8,24 @@ obj-y += pmc.o obj-y += flowctrl.o obj-y += powergate.o obj-y += apbio.o +obj-y += pm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o +endif obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-t30.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o +endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c index b5015d0f1912..d091675ba376 100644 --- a/arch/arm/mach-tegra/apbio.c +++ b/arch/arm/mach-tegra/apbio.c @@ -15,7 +15,6 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <mach/iomap.h> #include <linux/of.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> @@ -24,9 +23,8 @@ #include <linux/sched.h> #include <linux/mutex.h> -#include <mach/dma.h> - #include "apbio.h" +#include "iomap.h" #if defined(CONFIG_TEGRA20_APB_DMA) static DEFINE_MUTEX(tegra_apb_dma_lock); @@ -71,7 +69,6 @@ bool tegra_apb_dma_init(void) dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - dma_sconfig.slave_id = TEGRA_DMA_REQ_SEL_CNTR; dma_sconfig.src_maxburst = 1; dma_sconfig.dst_maxburst = 1; diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index aa5325cd1c42..734d9cc87f2e 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -40,12 +40,10 @@ #include <asm/mach/time.h> #include <asm/setup.h> -#include <mach/iomap.h> -#include <mach/irqs.h> - #include "board.h" #include "clock.h" #include "common.h" +#include "iomap.h" struct tegra_ehci_platform_data tegra_ehci1_pdata = { .operating_mode = TEGRA_USB_OTG, @@ -91,6 +89,17 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { &tegra_ehci3_pdata), OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sflash", 0x7000c380, "spi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D400, "spi_tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000DA00, "spi_tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-host1x", 0x50000000, "host1x", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54200000, "tegradc.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54240000, "tegradc.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-hdmi", 0x54280000, "hdmi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dsi", 0x54300000, "dsi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-tvo", 0x542c0000, "tvo", NULL), {} }; @@ -104,8 +113,20 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "pll_a", "pll_p_out1", 56448000, true }, { "pll_a_out0", "pll_a", 11289600, true }, { "cdev1", NULL, 0, true }, + { "blink", "clk_32k", 32768, true }, { "i2s1", "pll_a_out0", 11289600, false}, { "i2s2", "pll_a_out0", 11289600, false}, + { "sdmmc1", "pll_p", 48000000, false}, + { "sdmmc3", "pll_p", 48000000, false}, + { "sdmmc4", "pll_p", 48000000, false}, + { "spi", "pll_p", 20000000, false }, + { "sbc1", "pll_p", 100000000, false }, + { "sbc2", "pll_p", 100000000, false }, + { "sbc3", "pll_p", 100000000, false }, + { "sbc4", "pll_p", 100000000, false }, + { "host1x", "pll_c", 150000000, false }, + { "disp1", "pll_p", 600000000, false }, + { "disp2", "pll_p", 600000000, false }, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 5e92a81f9a2e..6497d1236b08 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -33,11 +33,10 @@ #include <asm/mach/arch.h> #include <asm/hardware/gic.h> -#include <mach/iomap.h> - #include "board.h" #include "clock.h" #include "common.h" +#include "iomap.h" struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL), @@ -52,6 +51,18 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D400, "spi_tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D600, "spi_tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D800, "spi_tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DA00, "spi_tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DC00, "spi_tegra.4", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DE00, "spi_tegra.5", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-host1x", 0x50000000, "host1x", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54200000, "tegradc.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54240000, "tegradc.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-hdmi", 0x54280000, "hdmi", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dsi", 0x54300000, "dsi", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-tvo", 0x542c0000, "tvo", NULL), {} }; @@ -62,11 +73,24 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "pll_a_out0", "pll_a", 11289600, true }, { "extern1", "pll_a_out0", 0, true }, { "clk_out_1", "extern1", 0, true }, + { "blink", "clk_32k", 32768, true }, { "i2s0", "pll_a_out0", 11289600, false}, { "i2s1", "pll_a_out0", 11289600, false}, { "i2s2", "pll_a_out0", 11289600, false}, { "i2s3", "pll_a_out0", 11289600, false}, { "i2s4", "pll_a_out0", 11289600, false}, + { "sdmmc1", "pll_p", 48000000, false}, + { "sdmmc3", "pll_p", 48000000, false}, + { "sdmmc4", "pll_p", 48000000, false}, + { "sbc1", "pll_p", 100000000, false}, + { "sbc2", "pll_p", 100000000, false}, + { "sbc3", "pll_p", 100000000, false}, + { "sbc4", "pll_p", 100000000, false}, + { "sbc5", "pll_p", 100000000, false}, + { "sbc6", "pll_p", 100000000, false}, + { "host1x", "pll_c", 150000000, false}, + { "disp1", "pll_p", 600000000, false}, + { "disp2", "pll_p", 600000000, false}, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index fd82085eca5d..867bf8bf5561 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -27,8 +27,6 @@ #include <linux/seq_file.h> #include <linux/slab.h> -#include <mach/clk.h> - #include "board.h" #include "clock.h" #include "tegra_cpu_car.h" diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 0b0a5f556d34..11a74db51e5d 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -26,16 +26,17 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> -#include <mach/iomap.h> #include <mach/powergate.h> #include "board.h" #include "clock.h" #include "common.h" #include "fuse.h" +#include "iomap.h" #include "pmc.h" #include "apbio.h" #include "sleep.h" +#include "pm.h" /* * Storage for debug-macro.S's state. @@ -104,25 +105,30 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { { "clk_m", NULL, 0, true }, { "pll_p", "clk_m", 408000000, true }, { "pll_p_out1", "pll_p", 9600000, true }, + { "pll_p_out4", "pll_p", 102000000, true }, + { "sclk", "pll_p_out4", 102000000, true }, + { "hclk", "sclk", 102000000, true }, + { "pclk", "hclk", 51000000, true }, + { "csite", NULL, 0, true }, { NULL, NULL, 0, 0}, }; #endif -static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) +static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 + int ret; void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; - writel_relaxed(tag_latency, p + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(data_latency, p + L2X0_DATA_LATENCY_CTRL); - cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x6C000001; + aux_ctrl |= 0x7C400001; - l2x0_init(p, aux_ctrl, 0x8200c3fe); + ret = l2x0_of_init(aux_ctrl, 0x8200c3fe); + if (!ret) + l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs); #endif } @@ -134,7 +140,7 @@ void __init tegra20_init_early(void) tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); - tegra_init_cache(0x331, 0x441); + tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); tegra20_hotplug_init(); @@ -147,7 +153,7 @@ void __init tegra30_init_early(void) tegra_init_fuse(); tegra30_init_clocks(); tegra_clk_init_from_table(tegra30_clk_init_table); - tegra_init_cache(0x441, 0x551); + tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); tegra30_hotplug_init(); diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index 627bf0f4262e..a74d3c7d2e26 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -30,9 +30,6 @@ #include <linux/io.h> #include <linux/suspend.h> - -#include <mach/clk.h> - /* Frequency table index must be sequential starting at 0 */ static struct cpufreq_frequency_table freq_table[] = { { 0, 216000 }, diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c new file mode 100644 index 000000000000..d32e8b0dbd4f --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -0,0 +1,66 @@ +/* + * CPU idle driver for Tegra CPUs + * + * Copyright (c) 2010-2012, NVIDIA Corporation. + * Copyright (c) 2011 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * Gary King <gking@nvidia.com> + * + * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cpuidle.h> + +#include <asm/cpuidle.h> + +static struct cpuidle_driver tegra_idle_driver = { + .name = "tegra_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .state_count = 1, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); + +int __init tegra20_cpuidle_init(void) +{ + int ret; + unsigned int cpu; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &tegra_idle_driver; + + ret = cpuidle_register_driver(&tegra_idle_driver); + if (ret) { + pr_err("CPUidle driver registration failed\n"); + return ret; + } + + for_each_possible_cpu(cpu) { + dev = &per_cpu(tegra_idle_device, cpu); + dev->cpu = cpu; + + dev->state_count = drv->state_count; + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("CPU%u: CPUidle device registration failed\n", + cpu); + return ret; + } + } + return 0; +} diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c new file mode 100644 index 000000000000..5e8cbf5b799f --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -0,0 +1,188 @@ +/* + * CPU idle driver for Tegra CPUs + * + * Copyright (c) 2010-2012, NVIDIA Corporation. + * Copyright (c) 2011 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * Gary King <gking@nvidia.com> + * + * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/clockchips.h> + +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> +#include <asm/smp_plat.h> + +#include "pm.h" +#include "sleep.h" +#include "tegra_cpu_car.h" + +#ifdef CONFIG_PM_SLEEP +static int tegra30_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index); +#endif + +static struct cpuidle_driver tegra_idle_driver = { + .name = "tegra_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, +#ifdef CONFIG_PM_SLEEP + .state_count = 2, +#else + .state_count = 1, +#endif + .states = { + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + [1] = { + .enter = tegra30_idle_lp2, + .exit_latency = 2000, + .target_residency = 2200, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); + +#ifdef CONFIG_PM_SLEEP +static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct cpuidle_state *state = &drv->states[index]; + u32 cpu_on_time = state->exit_latency; + u32 cpu_off_time = state->target_residency - state->exit_latency; + + /* All CPUs entering LP2 is not working. + * Don't let CPU0 enter LP2 when any secondary CPU is online. + */ + if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) { + cpu_do_idle(); + return false; + } + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + return true; +} + +#ifdef CONFIG_SMP +static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + smp_wmb(); + + save_cpu_arch_register(); + + cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); + + restore_cpu_arch_register(); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + return true; +} +#else +static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + return true; +} +#endif + +static int __cpuinit tegra30_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; + bool entered_lp2 = false; + bool last_cpu; + + local_fiq_disable(); + + last_cpu = tegra_set_cpu_in_lp2(cpu); + cpu_pm_enter(); + + if (cpu == 0) { + if (last_cpu) + entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv, + index); + else + cpu_do_idle(); + } else { + entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index); + } + + cpu_pm_exit(); + tegra_clear_cpu_in_lp2(cpu); + + local_fiq_enable(); + + smp_rmb(); + + return (entered_lp2) ? index : 0; +} +#endif + +int __init tegra30_cpuidle_init(void) +{ + int ret; + unsigned int cpu; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &tegra_idle_driver; + +#ifdef CONFIG_PM_SLEEP + tegra_tear_down_cpu = tegra30_tear_down_cpu; +#endif + + ret = cpuidle_register_driver(&tegra_idle_driver); + if (ret) { + pr_err("CPUidle driver registration failed\n"); + return ret; + } + + for_each_possible_cpu(cpu) { + dev = &per_cpu(tegra_idle_device, cpu); + dev->cpu = cpu; + + dev->state_count = drv->state_count; + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("CPU%u: CPUidle device registration failed\n", + cpu); + return ret; + } + } + return 0; +} diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index 566e2f88899b..d0651397aec7 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -23,85 +23,26 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/cpu.h> -#include <linux/cpuidle.h> -#include <linux/hrtimer.h> -#include <asm/proc-fns.h> - -#include <mach/iomap.h> - -static int tegra_idle_enter_lp3(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index); - -struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, - .state_count = 1, - .states = { - [0] = { - .enter = tegra_idle_enter_lp3, - .exit_latency = 10, - .target_residency = 10, - .power_usage = 600, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "LP3", - .desc = "CPU flow-controlled", - }, - }, -}; - -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); - -static int tegra_idle_enter_lp3(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - ktime_t enter, exit; - s64 us; - - local_irq_disable(); - local_fiq_disable(); - - enter = ktime_get(); - - cpu_do_idle(); - - exit = ktime_sub(ktime_get(), enter); - us = ktime_to_us(exit); - - local_fiq_enable(); - local_irq_enable(); - - dev->last_residency = us; - - return index; -} +#include "fuse.h" +#include "cpuidle.h" static int __init tegra_cpuidle_init(void) { int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; + switch (tegra_chip_id) { + case TEGRA20: + ret = tegra20_cpuidle_init(); + break; + case TEGRA30: + ret = tegra30_cpuidle_init(); + break; + default: + ret = -ENODEV; + break; } - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return ret; } device_initcall(tegra_cpuidle_init); diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h new file mode 100644 index 000000000000..496204d34e55 --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle.h @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __MACH_TEGRA_CPUIDLE_H +#define __MACH_TEGRA_CPUIDLE_H + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +int tegra20_cpuidle_init(void); +#else +static inline int tegra20_cpuidle_init(void) { return -ENODEV; } +#endif + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +int tegra30_cpuidle_init(void); +#else +static inline int tegra30_cpuidle_init(void) { return -ENODEV; } +#endif + +#endif diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index f07488e0bd32..a2250ddae797 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -21,10 +21,10 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> - -#include <mach/iomap.h> +#include <linux/cpumask.h> #include "flowctrl.h" +#include "iomap.h" u8 flowctrl_offset_halt_cpu[] = { FLOW_CTRL_HALT_CPU0_EVENTS, @@ -51,6 +51,14 @@ static void flowctrl_update(u8 offset, u32 value) readl_relaxed(addr); } +u32 flowctrl_read_cpu_csr(unsigned int cpuid) +{ + u8 offset = flowctrl_offset_cpu_csr[cpuid]; + void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset; + + return readl(addr); +} + void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value) { return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value); @@ -60,3 +68,41 @@ void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value) { return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value); } + +void flowctrl_cpu_suspend_enter(unsigned int cpuid) +{ + unsigned int reg; + int i; + + reg = flowctrl_read_cpu_csr(cpuid); + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr flag */ + reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event flag */ + reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; /* pwr gating on wfi */ + reg |= FLOW_CTRL_CSR_ENABLE; /* pwr gating */ + flowctrl_write_cpu_csr(cpuid, reg); + + for (i = 0; i < num_possible_cpus(); i++) { + if (i == cpuid) + continue; + reg = flowctrl_read_cpu_csr(i); + reg |= FLOW_CTRL_CSR_EVENT_FLAG; + reg |= FLOW_CTRL_CSR_INTR_FLAG; + flowctrl_write_cpu_csr(i, reg); + } +} + +void flowctrl_cpu_suspend_exit(unsigned int cpuid) +{ + unsigned int reg; + + /* Disable powergating via flow controller for CPU0 */ + reg = flowctrl_read_cpu_csr(cpuid); + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + reg &= ~FLOW_CTRL_CSR_ENABLE; /* clear enable */ + reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr */ + reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event */ + flowctrl_write_cpu_csr(cpuid, reg); +} diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 19428173855e..0798dec1832d 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -34,9 +34,17 @@ #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 +#define TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 (1 << 8) +#define TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP (0xF << 4) +#define TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP (0xF << 8) + #ifndef __ASSEMBLY__ +u32 flowctrl_read_cpu_csr(unsigned int cpuid); void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value); void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value); + +void flowctrl_cpu_suspend_enter(unsigned int cpuid); +void flowctrl_cpu_suspend_exit(unsigned int cpuid); #endif #endif diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index 0b7db174a5de..8121742711fe 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -21,22 +21,28 @@ #include <linux/io.h> #include <linux/export.h> -#include <mach/iomap.h> - #include "fuse.h" +#include "iomap.h" #include "apbio.h" #define FUSE_UID_LOW 0x108 #define FUSE_UID_HIGH 0x10c #define FUSE_SKU_INFO 0x110 -#define FUSE_SPARE_BIT 0x200 + +#define TEGRA20_FUSE_SPARE_BIT 0x200 +#define TEGRA30_FUSE_SPARE_BIT 0x244 int tegra_sku_id; int tegra_cpu_process_id; int tegra_core_process_id; int tegra_chip_id; +int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */ +int tegra_soc_speedo_id; enum tegra_revision tegra_revision; +static int tegra_fuse_spare_bit; +static void (*tegra_init_speedo_data)(void); + /* The BCT to use at boot is specified by board straps that can be read * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs. */ @@ -57,14 +63,14 @@ static const char *tegra_revision_name[TEGRA_REVISION_MAX] = { [TEGRA_REVISION_A04] = "A04", }; -static inline u32 tegra_fuse_readl(unsigned long offset) +u32 tegra_fuse_readl(unsigned long offset) { return tegra_apb_readl(TEGRA_FUSE_BASE + offset); } -static inline bool get_spare_fuse(int bit) +bool tegra_spare_fuse(int bit) { - return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4); + return tegra_fuse_readl(tegra_fuse_spare_bit + bit * 4); } static enum tegra_revision tegra_get_revision(u32 id) @@ -78,7 +84,7 @@ static enum tegra_revision tegra_get_revision(u32 id) return TEGRA_REVISION_A02; case 3: if (tegra_chip_id == TEGRA20 && - (get_spare_fuse(18) || get_spare_fuse(19))) + (tegra_spare_fuse(18) || tegra_spare_fuse(19))) return TEGRA_REVISION_A03p; else return TEGRA_REVISION_A03; @@ -89,6 +95,16 @@ static enum tegra_revision tegra_get_revision(u32 id) } } +static void tegra_get_process_id(void) +{ + u32 reg; + + reg = tegra_fuse_readl(tegra_fuse_spare_bit); + tegra_cpu_process_id = (reg >> 6) & 3; + reg = tegra_fuse_readl(tegra_fuse_spare_bit); + tegra_core_process_id = (reg >> 12) & 3; +} + void tegra_init_fuse(void) { u32 id; @@ -100,19 +116,29 @@ void tegra_init_fuse(void) reg = tegra_fuse_readl(FUSE_SKU_INFO); tegra_sku_id = reg & 0xFF; - reg = tegra_fuse_readl(FUSE_SPARE_BIT); - tegra_cpu_process_id = (reg >> 6) & 3; - - reg = tegra_fuse_readl(FUSE_SPARE_BIT); - tegra_core_process_id = (reg >> 12) & 3; - reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT; id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); tegra_chip_id = (id >> 8) & 0xff; + switch (tegra_chip_id) { + case TEGRA20: + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra20_init_speedo_data; + break; + case TEGRA30: + tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra30_init_speedo_data; + break; + default: + pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id); + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra_get_process_id; + } + tegra_revision = tegra_get_revision(id); + tegra_init_speedo_data(); pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", tegra_revision_name[tegra_revision], diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index d2107b2cb85a..ff1383dd61a7 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -42,11 +42,27 @@ extern int tegra_sku_id; extern int tegra_cpu_process_id; extern int tegra_core_process_id; extern int tegra_chip_id; +extern int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */ +extern int tegra_soc_speedo_id; extern enum tegra_revision tegra_revision; extern int tegra_bct_strapping; unsigned long long tegra_chip_uid(void); void tegra_init_fuse(void); +bool tegra_spare_fuse(int bit); +u32 tegra_fuse_readl(unsigned long offset); + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void tegra20_init_speedo_data(void); +#else +static inline void tegra20_init_speedo_data(void) {} +#endif + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +void tegra30_init_speedo_data(void); +#else +static inline void tegra30_init_speedo_data(void) {} +#endif #endif diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 6addc78cb6b2..4a317fae6860 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -2,10 +2,11 @@ #include <linux/init.h> #include <asm/cache.h> - -#include <mach/iomap.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> #include "flowctrl.h" +#include "iomap.h" #include "reset.h" #include "sleep.h" @@ -69,6 +70,64 @@ ENTRY(tegra_secondary_startup) b secondary_startup ENDPROC(tegra_secondary_startup) +#ifdef CONFIG_PM_SLEEP +/* + * tegra_resume + * + * CPU boot vector when restarting the a CPU following + * an LP2 transition. Also branched to by LP0 and LP1 resume after + * re-enabling sdram. + */ +ENTRY(tegra_resume) + bl v7_invalidate_l1 + /* Enable coresight */ + mov32 r0, 0xC5ACCE55 + mcr p14, 0, r0, c7, c12, 6 + + cpu_id r0 + cmp r0, #0 @ CPU0? + bne cpu_resume @ no + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + beq 1f @ Yes + /* Clear the flow controller flags for this CPU. */ + mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR + ldr r1, [r2] + /* Clear event & intr flag */ + orr r1, r1, \ + #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps + bic r1, r1, r0 + str r1, [r2] +1: +#endif + +#ifdef CONFIG_HAVE_ARM_SCU + /* enable SCU */ + mov32 r0, TEGRA_ARM_PERIF_BASE + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] +#endif + + /* L2 cache resume & re-enable */ + l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr + + b cpu_resume +ENDPROC(tegra_resume) +#endif + +#ifdef CONFIG_CACHE_L2X0 + .globl l2x0_saved_regs_addr +l2x0_saved_regs_addr: + .long 0 +#endif + .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_start) @@ -122,6 +181,17 @@ ENTRY(__tegra_cpu_reset_handler) 1: #endif + /* Waking up from LP2? */ + ldr r9, [r12, #RESET_DATA(MASK_LP2)] + tst r9, r11 @ if in_lp2 + beq __is_not_lp2 + ldr lr, [r12, #RESET_DATA(STARTUP_LP2)] + cmp lr, #0 + bleq __die @ no LP2 startup handler + bx lr + +__is_not_lp2: + #ifdef CONFIG_SMP /* * Can only be secondary boot (initial or hotplug) but CPU 0 diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 8ce0661b8a3d..44ca7b1d8b8a 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -26,8 +26,8 @@ #include <linux/serial_reg.h> -#include <mach/iomap.h> -#include <mach/irammap.h> +#include "../../iomap.h" +#include "../../irammap.h" .macro addruart, rp, rv, tmp adr \rp, 99f @ actual addr of 99f diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h deleted file mode 100644 index 3081cc6dda3b..000000000000 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/dma.h - * - * Copyright (c) 2008-2009, NVIDIA Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef __MACH_TEGRA_DMA_H -#define __MACH_TEGRA_DMA_H - -#include <linux/list.h> - -#define TEGRA_DMA_REQ_SEL_CNTR 0 -#define TEGRA_DMA_REQ_SEL_I2S_2 1 -#define TEGRA_DMA_REQ_SEL_I2S_1 2 -#define TEGRA_DMA_REQ_SEL_SPD_I 3 -#define TEGRA_DMA_REQ_SEL_UI_I 4 -#define TEGRA_DMA_REQ_SEL_MIPI 5 -#define TEGRA_DMA_REQ_SEL_I2S2_2 6 -#define TEGRA_DMA_REQ_SEL_I2S2_1 7 -#define TEGRA_DMA_REQ_SEL_UARTA 8 -#define TEGRA_DMA_REQ_SEL_UARTB 9 -#define TEGRA_DMA_REQ_SEL_UARTC 10 -#define TEGRA_DMA_REQ_SEL_SPI 11 -#define TEGRA_DMA_REQ_SEL_AC97 12 -#define TEGRA_DMA_REQ_SEL_ACMODEM 13 -#define TEGRA_DMA_REQ_SEL_SL4B 14 -#define TEGRA_DMA_REQ_SEL_SL2B1 15 -#define TEGRA_DMA_REQ_SEL_SL2B2 16 -#define TEGRA_DMA_REQ_SEL_SL2B3 17 -#define TEGRA_DMA_REQ_SEL_SL2B4 18 -#define TEGRA_DMA_REQ_SEL_UARTD 19 -#define TEGRA_DMA_REQ_SEL_UARTE 20 -#define TEGRA_DMA_REQ_SEL_I2C 21 -#define TEGRA_DMA_REQ_SEL_I2C2 22 -#define TEGRA_DMA_REQ_SEL_I2C3 23 -#define TEGRA_DMA_REQ_SEL_DVC_I2C 24 -#define TEGRA_DMA_REQ_SEL_OWR 25 -#define TEGRA_DMA_REQ_SEL_INVALID 31 - -#endif diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h index 4752b1a68f35..06763fe7529d 100644 --- a/arch/arm/mach-tegra/include/mach/powergate.h +++ b/arch/arm/mach-tegra/include/mach/powergate.h @@ -20,6 +20,8 @@ #ifndef _MACH_TEGRA_POWERGATE_H_ #define _MACH_TEGRA_POWERGATE_H_ +struct clk; + #define TEGRA_POWERGATE_CPU 0 #define TEGRA_POWERGATE_3D 1 #define TEGRA_POWERGATE_VENC 2 diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/arch/arm/mach-tegra/include/mach/tegra-ahb.h deleted file mode 100644 index e0f8c84b1d8c..000000000000 --- a/arch/arm/mach-tegra/include/mach/tegra-ahb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef __MACH_TEGRA_AHB_H__ -#define __MACH_TEGRA_AHB_H__ - -extern int tegra_ahb_enable_smmu(struct device_node *ahb); - -#endif /* __MACH_TEGRA_AHB_H__ */ diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 937c4c50219e..27725750ca3e 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -28,8 +28,8 @@ #include <linux/types.h> #include <linux/serial_reg.h> -#include <mach/iomap.h> -#include <mach/irammap.h> +#include "../../iomap.h" +#include "../../irammap.h" #define BIT(x) (1 << (x)) #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index 58b4baf9c483..7d09f301b3a1 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -26,9 +26,9 @@ #include <asm/page.h> #include <asm/mach/map.h> -#include <mach/iomap.h> #include "board.h" +#include "iomap.h" static struct map_desc tegra_io_desc[] __initdata = { { diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/iomap.h index fee3a94c4549..53151030a07d 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-tegra/include/mach/iomap.h - * * Copyright (C) 2010 Google, Inc. * * Author: diff --git a/arch/arm/mach-tegra/include/mach/irammap.h b/arch/arm/mach-tegra/irammap.h index 0cbe63261854..0cbe63261854 100644 --- a/arch/arm/mach-tegra/include/mach/irammap.h +++ b/arch/arm/mach-tegra/irammap.h diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 2f5bd2db8e1f..b7886f183511 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -25,9 +25,8 @@ #include <asm/hardware/gic.h> -#include <mach/iomap.h> - #include "board.h" +#include "iomap.h" #define ICTLR_CPU_IEP_VFIQ 0x08 #define ICTLR_CPU_IEP_FIR 0x14 diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index a8dba6489c9b..f18fc3ab4e58 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -37,11 +37,11 @@ #include <asm/sizes.h> #include <asm/mach/pci.h> -#include <mach/iomap.h> #include <mach/clk.h> #include <mach/powergate.h> #include "board.h" +#include "iomap.h" /* register definitions */ #define AFI_OFFSET 0x3800 diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 81cb26591acf..1b926df99c4b 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -24,8 +24,6 @@ #include <asm/mach-types.h> #include <asm/smp_scu.h> -#include <mach/clk.h> -#include <mach/iomap.h> #include <mach/powergate.h> #include "fuse.h" @@ -34,6 +32,7 @@ #include "tegra_cpu_car.h" #include "common.h" +#include "iomap.h" extern void tegra_secondary_startup(void); diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c new file mode 100644 index 000000000000..1b11707eaca0 --- /dev/null +++ b/arch/arm/mach-tegra/pm.c @@ -0,0 +1,216 @@ +/* + * CPU complex suspend & resume functions for Tegra SoCs + * + * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/cpumask.h> +#include <linux/delay.h> +#include <linux/cpu_pm.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <asm/smp_plat.h> +#include <asm/cacheflush.h> +#include <asm/suspend.h> +#include <asm/idmap.h> +#include <asm/proc-fns.h> +#include <asm/tlbflush.h> + +#include "iomap.h" +#include "reset.h" +#include "flowctrl.h" +#include "sleep.h" +#include "tegra_cpu_car.h" + +#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ + +#define PMC_CTRL 0x0 +#define PMC_CPUPWRGOOD_TIMER 0xc8 +#define PMC_CPUPWROFF_TIMER 0xcc + +#ifdef CONFIG_PM_SLEEP +static unsigned int g_diag_reg; +static DEFINE_SPINLOCK(tegra_lp2_lock); +static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); +static struct clk *tegra_pclk; +void (*tegra_tear_down_cpu)(void); + +void save_cpu_arch_register(void) +{ + /* read diagnostic register */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); + return; +} + +void restore_cpu_arch_register(void) +{ + /* write diagnostic register */ + asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); + return; +} + +static void set_power_timers(unsigned long us_on, unsigned long us_off) +{ + unsigned long long ticks; + unsigned long long pclk; + unsigned long rate; + static unsigned long tegra_last_pclk; + + if (tegra_pclk == NULL) { + tegra_pclk = clk_get_sys(NULL, "pclk"); + WARN_ON(IS_ERR(tegra_pclk)); + } + + rate = clk_get_rate(tegra_pclk); + + if (WARN_ON_ONCE(rate <= 0)) + pclk = 100000000; + else + pclk = rate; + + if ((rate != tegra_last_pclk)) { + ticks = (us_on * pclk) + 999999ull; + do_div(ticks, 1000000); + writel((unsigned long)ticks, pmc + PMC_CPUPWRGOOD_TIMER); + + ticks = (us_off * pclk) + 999999ull; + do_div(ticks, 1000000); + writel((unsigned long)ticks, pmc + PMC_CPUPWROFF_TIMER); + wmb(); + } + tegra_last_pclk = pclk; +} + +/* + * restore_cpu_complex + * + * restores cpu clock setting, clears flow controller + * + * Always called on CPU 0. + */ +static void restore_cpu_complex(void) +{ + int cpu = smp_processor_id(); + + BUG_ON(cpu != 0); + +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif + + /* Restore the CPU clock settings */ + tegra_cpu_clock_resume(); + + flowctrl_cpu_suspend_exit(cpu); + + restore_cpu_arch_register(); +} + +/* + * suspend_cpu_complex + * + * saves pll state for use by restart_plls, prepares flow controller for + * transition to suspend state + * + * Must always be called on cpu 0. + */ +static void suspend_cpu_complex(void) +{ + int cpu = smp_processor_id(); + + BUG_ON(cpu != 0); + +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif + + /* Save the CPU clock settings */ + tegra_cpu_clock_suspend(); + + flowctrl_cpu_suspend_enter(cpu); + + save_cpu_arch_register(); +} + +void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id) +{ + u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; + + spin_lock(&tegra_lp2_lock); + + BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id))); + *cpu_in_lp2 &= ~BIT(phy_cpu_id); + + spin_unlock(&tegra_lp2_lock); +} + +bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id) +{ + bool last_cpu = false; + cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask; + u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; + + spin_lock(&tegra_lp2_lock); + + BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id))); + *cpu_in_lp2 |= BIT(phy_cpu_id); + + if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask)) + last_cpu = true; + + spin_unlock(&tegra_lp2_lock); + return last_cpu; +} + +static int tegra_sleep_cpu(unsigned long v2p) +{ + /* Switch to the identity mapping. */ + cpu_switch_mm(idmap_pgd, &init_mm); + + /* Flush the TLB. */ + local_flush_tlb_all(); + + tegra_sleep_cpu_finish(v2p); + + /* should never here */ + BUG(); + + return 0; +} + +void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) +{ + u32 mode; + + /* Only the last cpu down does the final suspend steps */ + mode = readl(pmc + PMC_CTRL); + mode |= TEGRA_POWER_CPU_PWRREQ_OE; + writel(mode, pmc + PMC_CTRL); + + set_power_timers(cpu_on_time, cpu_off_time); + + cpu_cluster_pm_enter(); + suspend_cpu_complex(); + + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + + restore_cpu_complex(); + cpu_cluster_pm_exit(); +} +#endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h new file mode 100644 index 000000000000..787335cc964c --- /dev/null +++ b/arch/arm/mach-tegra/pm.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2010-2012 NVIDIA Corporation. All rights reserved. + * + * Author: + * Colin Cross <ccross@google.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _MACH_TEGRA_PM_H_ +#define _MACH_TEGRA_PM_H_ + +extern unsigned long l2x0_saved_regs_addr; + +void save_cpu_arch_register(void); +void restore_cpu_arch_register(void); + +void tegra_clear_cpu_in_lp2(int phy_cpu_id); +bool tegra_set_cpu_in_lp2(int phy_cpu_id); + +void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time); +extern void (*tegra_tear_down_cpu)(void); + +#endif /* _MACH_TEGRA_PM_H_ */ diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index 7af6a54404be..d4fdb5fcec20 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/of.h> -#include <mach/iomap.h> +#include "iomap.h" #define PMC_CTRL 0x0 #define PMC_CTRL_INTR_LOW (1 << 17) diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index de0662de28a0..2cc1185d902e 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -28,10 +28,10 @@ #include <linux/spinlock.h> #include <mach/clk.h> -#include <mach/iomap.h> #include <mach/powergate.h> #include "fuse.h" +#include "iomap.h" #define PWRGATE_TOGGLE 0x30 #define PWRGATE_TOGGLE_START (1 << 8) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 5beb7ebe2948..3fd89ecd158e 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -22,10 +22,10 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/iomap.h> -#include <mach/irammap.h> - +#include "iomap.h" +#include "irammap.h" #include "reset.h" +#include "sleep.h" #include "fuse.h" #define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \ @@ -80,5 +80,10 @@ void __init tegra_cpu_reset_handler_init(void) virt_to_phys((void *)tegra_secondary_startup); #endif +#ifdef CONFIG_PM_SLEEP + __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] = + virt_to_phys((void *)tegra_resume); +#endif + tegra_cpu_reset_handler_enable(); } diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index de88bf851dd3..c90d8e9c4ad2 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -29,6 +29,8 @@ #ifndef __ASSEMBLY__ +#include "irammap.h" + extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE]; void __tegra_cpu_reset_handler_start(void); @@ -36,6 +38,13 @@ void __tegra_cpu_reset_handler(void); void __tegra_cpu_reset_handler_end(void); void tegra_secondary_startup(void); +#ifdef CONFIG_PM_SLEEP +#define tegra_cpu_lp2_mask \ + (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ + ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \ + (u32)__tegra_cpu_reset_handler_start))) +#endif + #define tegra_cpu_reset_handler_offset \ ((u32)__tegra_cpu_reset_handler - \ (u32)__tegra_cpu_reset_handler_start) diff --git a/arch/arm/mach-tegra/sleep-t20.S b/arch/arm/mach-tegra/sleep-tegra20.S index a36ae413e2b8..72ce709799da 100644 --- a/arch/arm/mach-tegra/sleep-t20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -22,8 +22,6 @@ #include <asm/assembler.h> -#include <mach/iomap.h> - #include "sleep.h" #include "flowctrl.h" diff --git a/arch/arm/mach-tegra/sleep-t30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 777d9cee8b90..562a8e7e413d 100644 --- a/arch/arm/mach-tegra/sleep-t30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -17,8 +17,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> - -#include <mach/iomap.h> +#include <asm/asm-offsets.h> #include "sleep.h" #include "flowctrl.h" @@ -82,6 +81,7 @@ delay_1: ldr r3, [r1] @ read CSR str r3, [r1] @ clear CSR tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN + moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2 movne r3, #FLOW_CTRL_WAITEVENT @ For hotplug str r3, [r2] ldr r0, [r2] @@ -105,3 +105,67 @@ wfe_war: ENDPROC(tegra30_cpu_shutdown) #endif + +#ifdef CONFIG_PM_SLEEP +/* + * tegra30_sleep_cpu_secondary_finish(unsigned long v2p) + * + * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU. + */ +ENTRY(tegra30_sleep_cpu_secondary_finish) + mov r7, lr + + /* Flush and disable the L1 data cache */ + bl tegra_disable_clean_inv_dcache + + /* Powergate this CPU. */ + mov r0, #0 @ power mode flags (!hotplug) + bl tegra30_cpu_shutdown + mov r0, #1 @ never return here + mov pc, r7 +ENDPROC(tegra30_sleep_cpu_secondary_finish) + +/* + * tegra30_tear_down_cpu + * + * Switches the CPU to enter sleep. + */ +ENTRY(tegra30_tear_down_cpu) + mov32 r6, TEGRA_FLOW_CTRL_BASE + + b tegra30_enter_sleep +ENDPROC(tegra30_tear_down_cpu) + +/* + * tegra30_enter_sleep + * + * uses flow controller to enter sleep state + * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1 + * executes from SDRAM with target state is LP2 + * r6 = TEGRA_FLOW_CTRL_BASE + */ +tegra30_enter_sleep: + cpu_id r1 + + cpu_to_csr_reg r2, r1 + ldr r0, [r6, r2] + orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + orr r0, r0, #FLOW_CTRL_CSR_ENABLE + str r0, [r6, r2] + + mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT + orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + cpu_to_halt_reg r2, r1 + str r0, [r6, r2] + dsb + ldr r0, [r6, r2] /* memory barrier */ + +halted: + isb + dsb + wfi /* CPU should be power gated here */ + + /* !!!FIXME!!! Implement halt failure handler */ + b halted + +#endif diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index ea81554c4833..26afa7cbed11 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -25,9 +25,87 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/cache.h> +#include <asm/cp15.h> +#include <asm/hardware/cache-l2x0.h> -#include <mach/iomap.h> +#include "iomap.h" #include "flowctrl.h" #include "sleep.h" +#ifdef CONFIG_PM_SLEEP +/* + * tegra_disable_clean_inv_dcache + * + * disable, clean & invalidate the D-cache + * + * Corrupted registers: r1-r3, r6, r8, r9-r11 + */ +ENTRY(tegra_disable_clean_inv_dcache) + stmfd sp!, {r0, r4-r5, r7, r9-r11, lr} + dmb @ ensure ordering + + /* Disable the D-cache */ + mrc p15, 0, r2, c1, c0, 0 + bic r2, r2, #CR_C + mcr p15, 0, r2, c1, c0, 0 + isb + + /* Flush the D-cache */ + bl v7_flush_dcache_louis + + /* Trun off coherency */ + exit_smp r4, r5 + + ldmfd sp!, {r0, r4-r5, r7, r9-r11, pc} +ENDPROC(tegra_disable_clean_inv_dcache) + +/* + * tegra_sleep_cpu_finish(unsigned long v2p) + * + * enters suspend in LP2 by turning off the mmu and jumping to + * tegra?_tear_down_cpu + */ +ENTRY(tegra_sleep_cpu_finish) + /* Flush and disable the L1 data cache */ + bl tegra_disable_clean_inv_dcache + + mov32 r6, tegra_tear_down_cpu + ldr r1, [r6] + add r1, r1, r0 + + mov32 r3, tegra_shut_off_mmu + add r3, r3, r0 + mov r0, r1 + + mov pc, r3 +ENDPROC(tegra_sleep_cpu_finish) + +/* + * tegra_shut_off_mmu + * + * r0 = physical address to jump to with mmu off + * + * called with VA=PA mapping + * turns off MMU, icache, dcache and branch prediction + */ + .align L1_CACHE_SHIFT + .pushsection .idmap.text, "ax" +ENTRY(tegra_shut_off_mmu) + mrc p15, 0, r3, c1, c0, 0 + movw r2, #CR_I | CR_Z | CR_C | CR_M + bic r3, r3, r2 + dsb + mcr p15, 0, r3, c1, c0, 0 + isb +#ifdef CONFIG_CACHE_L2X0 + /* Disable L2 cache */ + mov32 r4, TEGRA_ARM_PERIF_BASE + 0x3000 + mov r5, #0 + str r5, [r4, #L2X0_CTRL] +#endif + mov pc, r0 +ENDPROC(tegra_shut_off_mmu) + .popsection +#endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index e25a7cd703d9..9821ee725420 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -17,7 +17,7 @@ #ifndef __MACH_TEGRA_SLEEP_H #define __MACH_TEGRA_SLEEP_H -#include <mach/iomap.h> +#include "iomap.h" #define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \ + IO_CPU_VIRT) @@ -71,7 +71,41 @@ str \tmp2, [\tmp1] @ invalidate SCU tags for CPU dsb .endm + +/* Macro to resume & re-enable L2 cache */ +#ifndef L2X0_CTRL_EN +#define L2X0_CTRL_EN 1 +#endif + +#ifdef CONFIG_CACHE_L2X0 +.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs + adr \tmp1, \phys_l2x0_saved_regs + ldr \tmp1, [\tmp1] + ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] + ldr \tmp3, [\tmp2, #L2X0_CTRL] + tst \tmp3, #L2X0_CTRL_EN + bne exit_l2_resume + ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY] + str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY] + str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL] + str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL] + str \tmp3, [\tmp2, #L2X0_POWER_CTRL] + ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL] + str \tmp3, [\tmp2, #L2X0_AUX_CTRL] + mov \tmp3, #L2X0_CTRL_EN + str \tmp3, [\tmp2, #L2X0_CTRL] +exit_l2_resume: +.endm +#else /* CONFIG_CACHE_L2X0 */ +.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs +.endm +#endif /* CONFIG_CACHE_L2X0 */ #else +void tegra_resume(void); +int tegra_sleep_cpu_finish(unsigned long); #ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_init(void); @@ -81,5 +115,8 @@ static inline void tegra20_hotplug_init(void) {} static inline void tegra30_hotplug_init(void) {} #endif +int tegra30_sleep_cpu_secondary_finish(unsigned long); +void tegra30_tear_down_cpu(void); + #endif #endif diff --git a/arch/arm/mach-tegra/tegra20_clocks.c b/arch/arm/mach-tegra/tegra20_clocks.c index deb873fb12b6..4eb6bc81a87b 100644 --- a/arch/arm/mach-tegra/tegra20_clocks.c +++ b/arch/arm/mach-tegra/tegra20_clocks.c @@ -27,10 +27,9 @@ #include <linux/clkdev.h> #include <linux/clk.h> -#include <mach/iomap.h> - #include "clock.h" #include "fuse.h" +#include "iomap.h" #include "tegra2_emc.h" #include "tegra_cpu_car.h" diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c index 8d398a33adf7..a23a0734e352 100644 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c @@ -27,8 +27,6 @@ #include <linux/io.h> #include <linux/clk.h> -#include <mach/iomap.h> - #include "clock.h" #include "fuse.h" #include "tegra2_emc.h" @@ -248,11 +246,16 @@ static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { { 19200000, 216000000, 135, 12, 1, 3}, { 26000000, 216000000, 216, 26, 1, 4}, + { 12000000, 297000000, 99, 4, 1, 4 }, + { 12000000, 339000000, 113, 4, 1, 4 }, + { 12000000, 594000000, 594, 12, 1, 8}, { 13000000, 594000000, 594, 13, 1, 8}, { 19200000, 594000000, 495, 16, 1, 8}, { 26000000, 594000000, 594, 26, 1, 8}, + { 12000000, 616000000, 616, 12, 1, 8}, + { 12000000, 1000000000, 1000, 12, 1, 12}, { 13000000, 1000000000, 1000, 13, 1, 12}, { 19200000, 1000000000, 625, 12, 1, 8}, @@ -1038,9 +1041,6 @@ static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), - CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"), CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"), CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"), CLK_DUPLICATE("epp", "tegra_grhost", "epp"), @@ -1053,6 +1053,9 @@ static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), + CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), + CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), + CLK_DUPLICATE("pll_d_out0", "hdmi", "parent"), }; #define CLK(dev, con, ck) \ diff --git a/arch/arm/mach-tegra/tegra20_speedo.c b/arch/arm/mach-tegra/tegra20_speedo.c new file mode 100644 index 000000000000..fa6eb570623f --- /dev/null +++ b/arch/arm/mach-tegra/tegra20_speedo.c @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CPU_SPEEDO_LSBIT 20 +#define CPU_SPEEDO_MSBIT 29 +#define CPU_SPEEDO_REDUND_LSBIT 30 +#define CPU_SPEEDO_REDUND_MSBIT 39 +#define CPU_SPEEDO_REDUND_OFFS (CPU_SPEEDO_REDUND_MSBIT - CPU_SPEEDO_MSBIT) + +#define CORE_SPEEDO_LSBIT 40 +#define CORE_SPEEDO_MSBIT 47 +#define CORE_SPEEDO_REDUND_LSBIT 48 +#define CORE_SPEEDO_REDUND_MSBIT 55 +#define CORE_SPEEDO_REDUND_OFFS (CORE_SPEEDO_REDUND_MSBIT - CORE_SPEEDO_MSBIT) + +#define SPEEDO_MULT 4 + +#define PROCESS_CORNERS_NUM 4 + +#define SPEEDO_ID_SELECT_0(rev) ((rev) <= 2) +#define SPEEDO_ID_SELECT_1(sku) \ + (((sku) != 20) && ((sku) != 23) && ((sku) != 24) && \ + ((sku) != 27) && ((sku) != 28)) + +enum { + SPEEDO_ID_0, + SPEEDO_ID_1, + SPEEDO_ID_2, + SPEEDO_ID_COUNT, +}; + +static const u32 cpu_process_speedos[][PROCESS_CORNERS_NUM] = { + {315, 366, 420, UINT_MAX}, + {303, 368, 419, UINT_MAX}, + {316, 331, 383, UINT_MAX}, +}; + +static const u32 core_process_speedos[][PROCESS_CORNERS_NUM] = { + {165, 195, 224, UINT_MAX}, + {165, 195, 224, UINT_MAX}, + {165, 195, 224, UINT_MAX}, +}; + +void tegra20_init_speedo_data(void) +{ + u32 reg; + u32 val; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != SPEEDO_ID_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != SPEEDO_ID_COUNT); + + if (SPEEDO_ID_SELECT_0(tegra_revision)) + tegra_soc_speedo_id = SPEEDO_ID_0; + else if (SPEEDO_ID_SELECT_1(tegra_sku_id)) + tegra_soc_speedo_id = SPEEDO_ID_1; + else + tegra_soc_speedo_id = SPEEDO_ID_2; + + val = 0; + for (i = CPU_SPEEDO_MSBIT; i >= CPU_SPEEDO_LSBIT; i--) { + reg = tegra_spare_fuse(i) | + tegra_spare_fuse(i + CPU_SPEEDO_REDUND_OFFS); + val = (val << 1) | (reg & 0x1); + } + val = val * SPEEDO_MULT; + pr_debug("%s CPU speedo value %u\n", __func__, val); + + for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) { + if (val <= cpu_process_speedos[tegra_soc_speedo_id][i]) + break; + } + tegra_cpu_process_id = i; + + val = 0; + for (i = CORE_SPEEDO_MSBIT; i >= CORE_SPEEDO_LSBIT; i--) { + reg = tegra_spare_fuse(i) | + tegra_spare_fuse(i + CORE_SPEEDO_REDUND_OFFS); + val = (val << 1) | (reg & 0x1); + } + val = val * SPEEDO_MULT; + pr_debug("%s Core speedo value %u\n", __func__, val); + + for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) { + if (val <= core_process_speedos[tegra_soc_speedo_id][i]) + break; + } + tegra_core_process_id = i; + + pr_info("Tegra20 Soc Speedo ID %d", tegra_soc_speedo_id); +} diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index 5070d833bdd1..837c7b9ea63b 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -25,8 +25,6 @@ #include <linux/platform_device.h> #include <linux/platform_data/tegra_emc.h> -#include <mach/iomap.h> - #include "tegra2_emc.h" #include "fuse.h" diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index e9de5dfd94ec..efc000e32e1c 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -31,10 +31,11 @@ #include <asm/clkdev.h> -#include <mach/iomap.h> +#include <mach/powergate.h> #include "clock.h" #include "fuse.h" +#include "iomap.h" #include "tegra_cpu_car.h" #define USE_PLL_LOCK_BITS 0 @@ -310,6 +311,31 @@ #define CPU_CLOCK(cpu) (0x1 << (8 + cpu)) #define CPU_RESET(cpu) (0x1111ul << (cpu)) +#define CLK_RESET_CCLK_BURST 0x20 +#define CLK_RESET_CCLK_DIVIDER 0x24 +#define CLK_RESET_PLLX_BASE 0xe0 +#define CLK_RESET_PLLX_MISC 0xe4 + +#define CLK_RESET_SOURCE_CSITE 0x1d4 + +#define CLK_RESET_CCLK_BURST_POLICY_SHIFT 28 +#define CLK_RESET_CCLK_RUN_POLICY_SHIFT 4 +#define CLK_RESET_CCLK_IDLE_POLICY_SHIFT 0 +#define CLK_RESET_CCLK_IDLE_POLICY 1 +#define CLK_RESET_CCLK_RUN_POLICY 2 +#define CLK_RESET_CCLK_BURST_POLICY_PLLX 8 + +#ifdef CONFIG_PM_SLEEP +static struct cpu_clk_suspend_context { + u32 pllx_misc; + u32 pllx_base; + + u32 cpu_burst; + u32 clk_csite_src; + u32 cclk_divider; +} tegra30_cpu_clk_sctx; +#endif + /** * Structure defining the fields for USB UTMI clocks Parameters. */ @@ -792,6 +818,112 @@ struct clk_ops tegra30_twd_ops = { .recalc_rate = tegra30_twd_clk_recalc_rate, }; +/* bus clock functions */ +static int tegra30_bus_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val = clk_readl(c->reg); + + c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON; + return c->state; +} + +static int tegra30_bus_clk_enable(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val; + + val = clk_readl(c->reg); + val &= ~(BUS_CLK_DISABLE << c->reg_shift); + clk_writel(val, c->reg); + + return 0; +} + +static void tegra30_bus_clk_disable(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val; + + val = clk_readl(c->reg); + val |= BUS_CLK_DISABLE << c->reg_shift; + clk_writel(val, c->reg); +} + +static unsigned long tegra30_bus_clk_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val = clk_readl(c->reg); + u64 rate = prate; + + c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1; + c->mul = 1; + + if (c->mul != 0 && c->div != 0) { + rate *= c->mul; + rate += c->div - 1; /* round up */ + do_div(rate, c->div); + } + return rate; +} + +static int tegra30_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_tegra *c = to_clk_tegra(hw); + int ret = -EINVAL; + u32 val; + int i; + + val = clk_readl(c->reg); + for (i = 1; i <= 4; i++) { + if (rate == parent_rate / i) { + val &= ~(BUS_CLK_DIV_MASK << c->reg_shift); + val |= (i - 1) << c->reg_shift; + clk_writel(val, c->reg); + c->div = i; + c->mul = 1; + ret = 0; + break; + } + } + + return ret; +} + +static long tegra30_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long parent_rate = *prate; + s64 divider; + + if (rate >= parent_rate) + return parent_rate; + + divider = parent_rate; + divider += rate - 1; + do_div(divider, rate); + + if (divider < 0) + return divider; + + if (divider > 4) + divider = 4; + do_div(parent_rate, divider); + + return parent_rate; +} + +struct clk_ops tegra30_bus_ops = { + .is_enabled = tegra30_bus_clk_is_enabled, + .enable = tegra30_bus_clk_enable, + .disable = tegra30_bus_clk_disable, + .set_rate = tegra30_bus_clk_set_rate, + .round_rate = tegra30_bus_clk_round_rate, + .recalc_rate = tegra30_bus_clk_recalc_rate, +}; + /* Blink output functions */ static int tegra30_blink_clk_is_enabled(struct clk_hw *hw) { @@ -2281,12 +2413,93 @@ static void tegra30_disable_cpu_clock(u32 cpu) reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); } +#ifdef CONFIG_PM_SLEEP +static bool tegra30_cpu_rail_off_ready(void) +{ + unsigned int cpu_rst_status; + int cpu_pwr_status; + + cpu_rst_status = readl(reg_clk_base + + TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS); + cpu_pwr_status = tegra_powergate_is_powered(TEGRA_POWERGATE_CPU1) || + tegra_powergate_is_powered(TEGRA_POWERGATE_CPU2) || + tegra_powergate_is_powered(TEGRA_POWERGATE_CPU3); + + if (((cpu_rst_status & 0xE) != 0xE) || cpu_pwr_status) + return false; + + return true; +} + +static void tegra30_cpu_clock_suspend(void) +{ + /* switch coresite to clk_m, save off original source */ + tegra30_cpu_clk_sctx.clk_csite_src = + readl(reg_clk_base + CLK_RESET_SOURCE_CSITE); + writel(3<<30, reg_clk_base + CLK_RESET_SOURCE_CSITE); + + tegra30_cpu_clk_sctx.cpu_burst = + readl(reg_clk_base + CLK_RESET_CCLK_BURST); + tegra30_cpu_clk_sctx.pllx_base = + readl(reg_clk_base + CLK_RESET_PLLX_BASE); + tegra30_cpu_clk_sctx.pllx_misc = + readl(reg_clk_base + CLK_RESET_PLLX_MISC); + tegra30_cpu_clk_sctx.cclk_divider = + readl(reg_clk_base + CLK_RESET_CCLK_DIVIDER); +} + +static void tegra30_cpu_clock_resume(void) +{ + unsigned int reg, policy; + + /* Is CPU complex already running on PLLX? */ + reg = readl(reg_clk_base + CLK_RESET_CCLK_BURST); + policy = (reg >> CLK_RESET_CCLK_BURST_POLICY_SHIFT) & 0xF; + + if (policy == CLK_RESET_CCLK_IDLE_POLICY) + reg = (reg >> CLK_RESET_CCLK_IDLE_POLICY_SHIFT) & 0xF; + else if (policy == CLK_RESET_CCLK_RUN_POLICY) + reg = (reg >> CLK_RESET_CCLK_RUN_POLICY_SHIFT) & 0xF; + else + BUG(); + + if (reg != CLK_RESET_CCLK_BURST_POLICY_PLLX) { + /* restore PLLX settings if CPU is on different PLL */ + writel(tegra30_cpu_clk_sctx.pllx_misc, + reg_clk_base + CLK_RESET_PLLX_MISC); + writel(tegra30_cpu_clk_sctx.pllx_base, + reg_clk_base + CLK_RESET_PLLX_BASE); + + /* wait for PLL stabilization if PLLX was enabled */ + if (tegra30_cpu_clk_sctx.pllx_base & (1 << 30)) + udelay(300); + } + + /* + * Restore original burst policy setting for calls resulting from CPU + * LP2 in idle or system suspend. + */ + writel(tegra30_cpu_clk_sctx.cclk_divider, + reg_clk_base + CLK_RESET_CCLK_DIVIDER); + writel(tegra30_cpu_clk_sctx.cpu_burst, + reg_clk_base + CLK_RESET_CCLK_BURST); + + writel(tegra30_cpu_clk_sctx.clk_csite_src, + reg_clk_base + CLK_RESET_SOURCE_CSITE); +} +#endif + static struct tegra_cpu_car_ops tegra30_cpu_car_ops = { .wait_for_reset = tegra30_wait_cpu_in_reset, .put_in_reset = tegra30_put_cpu_in_reset, .out_of_reset = tegra30_cpu_out_of_reset, .enable_clock = tegra30_enable_cpu_clock, .disable_clock = tegra30_disable_cpu_clock, +#ifdef CONFIG_PM_SLEEP + .rail_off_ready = tegra30_cpu_rail_off_ready, + .suspend = tegra30_cpu_clock_suspend, + .resume = tegra30_cpu_clock_resume, +#endif }; void __init tegra30_cpu_car_ops_init(void) diff --git a/arch/arm/mach-tegra/tegra30_clocks.h b/arch/arm/mach-tegra/tegra30_clocks.h index f2f88fef6b8b..7a34adb2f72d 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.h +++ b/arch/arm/mach-tegra/tegra30_clocks.h @@ -34,6 +34,7 @@ extern struct clk_ops tegra_clk_out_ops; extern struct clk_ops tegra30_super_ops; extern struct clk_ops tegra30_blink_clk_ops; extern struct clk_ops tegra30_twd_ops; +extern struct clk_ops tegra30_bus_ops; extern struct clk_ops tegra30_periph_clk_ops; extern struct clk_ops tegra30_dsib_clk_ops; extern struct clk_ops tegra_nand_clk_ops; diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index 3d2e5532a9ea..6942c7add3bb 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -711,6 +711,50 @@ static struct clk tegra_clk_sclk = { .num_parents = ARRAY_SIZE(mux_sclk), }; +static const char *tegra_hclk_parent_names[] = { + "tegra_sclk", +}; + +static struct clk *tegra_hclk_parents[] = { + &tegra_clk_sclk, +}; + +static struct clk tegra_hclk; +static struct clk_tegra tegra_hclk_hw = { + .hw = { + .clk = &tegra_hclk, + }, + .flags = DIV_BUS, + .reg = 0x30, + .reg_shift = 4, + .max_rate = 378000000, + .min_rate = 12000000, +}; +DEFINE_CLK_TEGRA(hclk, 0, &tegra30_bus_ops, 0, tegra_hclk_parent_names, + tegra_hclk_parents, &tegra_clk_sclk); + +static const char *tegra_pclk_parent_names[] = { + "tegra_hclk", +}; + +static struct clk *tegra_pclk_parents[] = { + &tegra_hclk, +}; + +static struct clk tegra_pclk; +static struct clk_tegra tegra_pclk_hw = { + .hw = { + .clk = &tegra_pclk, + }, + .flags = DIV_BUS, + .reg = 0x30, + .reg_shift = 0, + .max_rate = 167000000, + .min_rate = 12000000, +}; +DEFINE_CLK_TEGRA(pclk, 0, &tegra30_bus_ops, 0, tegra_pclk_parent_names, + tegra_pclk_parents, &tegra_hclk); + static const char *mux_blink[] = { "clk_32k", }; @@ -1254,8 +1298,6 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), CLK_DUPLICATE("dsib", "tegradc.0", "dsib"), CLK_DUPLICATE("dsia", "tegradc.1", "dsia"), CLK_DUPLICATE("bsev", "tegra-avp", "bsev"), @@ -1293,6 +1335,9 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"), + CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), + CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), + CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"), }; struct clk *tegra_ptr_clks[] = { @@ -1325,6 +1370,8 @@ struct clk *tegra_ptr_clks[] = { &tegra_cml1, &tegra_pciex, &tegra_clk_sclk, + &tegra_hclk, + &tegra_pclk, &tegra_clk_blink, &tegra30_clk_twd, }; diff --git a/arch/arm/mach-tegra/tegra30_speedo.c b/arch/arm/mach-tegra/tegra30_speedo.c new file mode 100644 index 000000000000..125cb16424a6 --- /dev/null +++ b/arch/arm/mach-tegra/tegra30_speedo.c @@ -0,0 +1,292 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CORE_PROCESS_CORNERS_NUM 1 +#define CPU_PROCESS_CORNERS_NUM 6 + +#define FUSE_SPEEDO_CALIB_0 0x114 +#define FUSE_PACKAGE_INFO 0X1FC +#define FUSE_TEST_PROG_VER 0X128 + +#define G_SPEEDO_BIT_MINUS1 58 +#define G_SPEEDO_BIT_MINUS1_R 59 +#define G_SPEEDO_BIT_MINUS2 60 +#define G_SPEEDO_BIT_MINUS2_R 61 +#define LP_SPEEDO_BIT_MINUS1 62 +#define LP_SPEEDO_BIT_MINUS1_R 63 +#define LP_SPEEDO_BIT_MINUS2 64 +#define LP_SPEEDO_BIT_MINUS2_R 65 + +enum { + THRESHOLD_INDEX_0, + THRESHOLD_INDEX_1, + THRESHOLD_INDEX_2, + THRESHOLD_INDEX_3, + THRESHOLD_INDEX_4, + THRESHOLD_INDEX_5, + THRESHOLD_INDEX_6, + THRESHOLD_INDEX_7, + THRESHOLD_INDEX_8, + THRESHOLD_INDEX_9, + THRESHOLD_INDEX_10, + THRESHOLD_INDEX_11, + THRESHOLD_INDEX_COUNT, +}; + +static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = { + {180}, + {170}, + {195}, + {180}, + {168}, + {192}, + {180}, + {170}, + {195}, + {180}, + {180}, + {180}, +}; + +static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = { + {306, 338, 360, 376, UINT_MAX}, + {295, 336, 358, 375, UINT_MAX}, + {325, 325, 358, 375, UINT_MAX}, + {325, 325, 358, 375, UINT_MAX}, + {292, 324, 348, 364, UINT_MAX}, + {324, 324, 348, 364, UINT_MAX}, + {324, 324, 348, 364, UINT_MAX}, + {295, 336, 358, 375, UINT_MAX}, + {358, 358, 358, 358, 397, UINT_MAX}, + {364, 364, 364, 364, 397, UINT_MAX}, + {295, 336, 358, 375, 391, UINT_MAX}, + {295, 336, 358, 375, 391, UINT_MAX}, +}; + +static int threshold_index; +static int package_id; + +static void fuse_speedo_calib(u32 *speedo_g, u32 *speedo_lp) +{ + u32 reg; + int ate_ver; + int bit_minus1; + int bit_minus2; + + reg = tegra_fuse_readl(FUSE_SPEEDO_CALIB_0); + + *speedo_lp = (reg & 0xFFFF) * 4; + *speedo_g = ((reg >> 16) & 0xFFFF) * 4; + + ate_ver = tegra_fuse_readl(FUSE_TEST_PROG_VER); + pr_info("%s: ATE prog ver %d.%d\n", __func__, ate_ver/10, ate_ver%10); + + if (ate_ver >= 26) { + bit_minus1 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1); + bit_minus1 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1_R); + bit_minus2 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2); + bit_minus2 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2_R); + *speedo_lp |= (bit_minus1 << 1) | bit_minus2; + + bit_minus1 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS1); + bit_minus1 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS1_R); + bit_minus2 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS2); + bit_minus2 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS2_R); + *speedo_g |= (bit_minus1 << 1) | bit_minus2; + } else { + *speedo_lp |= 0x3; + *speedo_g |= 0x3; + } +} + +static void rev_sku_to_speedo_ids(int rev, int sku) +{ + switch (rev) { + case TEGRA_REVISION_A01: + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + case TEGRA_REVISION_A02: + case TEGRA_REVISION_A03: + switch (sku) { + case 0x87: + case 0x82: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_1; + break; + case 0x81: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_2; + break; + case 2: + tegra_cpu_speedo_id = 4; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_7; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x80: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 5; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_8; + break; + case 2: + tegra_cpu_speedo_id = 6; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_9; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x83: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 7; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_10; + break; + case 2: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_3; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x8F: + tegra_cpu_speedo_id = 8; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_11; + break; + case 0x08: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_4; + break; + case 0x02: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_5; + break; + case 0x04: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_6; + break; + case 0: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_2; + break; + case 2: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_3; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + default: + pr_warn("Tegra30: Unknown SKU %d\n", sku); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + } + break; + default: + pr_warn("Tegra30: Unknown chip rev %d\n", rev); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + } +} + +void tegra30_init_speedo_data(void) +{ + u32 cpu_speedo_val; + u32 core_speedo_val; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != + THRESHOLD_INDEX_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != + THRESHOLD_INDEX_COUNT); + + package_id = tegra_fuse_readl(FUSE_PACKAGE_INFO) & 0x0F; + + rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id); + fuse_speedo_calib(&cpu_speedo_val, &core_speedo_val); + pr_debug("%s CPU speedo value %u\n", __func__, cpu_speedo_val); + pr_debug("%s Core speedo value %u\n", __func__, core_speedo_val); + + for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) { + if (cpu_speedo_val < cpu_process_speedos[threshold_index][i]) + break; + } + tegra_cpu_process_id = i - 1; + + if (tegra_cpu_process_id == -1) { + pr_warn("Tegra30: CPU speedo value %3d out of range", + cpu_speedo_val); + tegra_cpu_process_id = 0; + tegra_cpu_speedo_id = 1; + } + + for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) { + if (core_speedo_val < core_process_speedos[threshold_index][i]) + break; + } + tegra_core_process_id = i - 1; + + if (tegra_core_process_id == -1) { + pr_warn("Tegra30: CORE speedo value %3d out of range", + core_speedo_val); + tegra_core_process_id = 0; + tegra_soc_speedo_id = 1; + } + + pr_info("Tegra30: CPU Speedo ID %d, Soc Speedo ID %d", + tegra_cpu_speedo_id, tegra_soc_speedo_id); +} diff --git a/arch/arm/mach-tegra/tegra_cpu_car.h b/arch/arm/mach-tegra/tegra_cpu_car.h index 30d063ad2bef..9764d31032b7 100644 --- a/arch/arm/mach-tegra/tegra_cpu_car.h +++ b/arch/arm/mach-tegra/tegra_cpu_car.h @@ -30,6 +30,12 @@ * CPU clock un-gate * disable_clock: * CPU clock gate + * rail_off_ready: + * CPU is ready for rail off + * suspend: + * save the clock settings when CPU go into low-power state + * resume: + * restore the clock settings when CPU exit low-power state */ struct tegra_cpu_car_ops { void (*wait_for_reset)(u32 cpu); @@ -37,6 +43,11 @@ struct tegra_cpu_car_ops { void (*out_of_reset)(u32 cpu); void (*enable_clock)(u32 cpu); void (*disable_clock)(u32 cpu); +#ifdef CONFIG_PM_SLEEP + bool (*rail_off_ready)(void); + void (*suspend)(void); + void (*resume)(void); +#endif }; extern struct tegra_cpu_car_ops *tegra_cpu_car_ops; @@ -81,6 +92,32 @@ static inline void tegra_disable_cpu_clock(u32 cpu) tegra_cpu_car_ops->disable_clock(cpu); } +#ifdef CONFIG_PM_SLEEP +static inline bool tegra_cpu_rail_off_ready(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->rail_off_ready)) + return false; + + return tegra_cpu_car_ops->rail_off_ready(); +} + +static inline void tegra_cpu_clock_suspend(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->suspend)) + return; + + tegra_cpu_car_ops->suspend(); +} + +static inline void tegra_cpu_clock_resume(void) +{ + if (WARN_ON(!tegra_cpu_car_ops->resume)) + return; + + tegra_cpu_car_ops->resume(); +} +#endif + void tegra20_cpu_car_ops_init(void); void tegra30_cpu_car_ops_init(void); diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index d3b8c8e7368f..6ff503536512 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -31,11 +31,11 @@ #include <asm/smp_twd.h> #include <asm/sched_clock.h> -#include <mach/iomap.h> #include <mach/irqs.h> #include "board.h" #include "clock.h" +#include "iomap.h" #define RTC_SECONDS 0x08 #define RTC_SHADOW_SECONDS 0x0c diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b8efac4daed8..12f3994c43db 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -82,8 +82,6 @@ static struct map_desc u300_io_desc[] __initdata = { static void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); - /* We enable a real big DMA buffer if need be. */ - init_consistent_dma_size(SZ_4M); } /* @@ -1445,8 +1443,6 @@ static struct platform_device pinctrl_device = { static struct u300_gpio_platform u300_gpio_plat = { .ports = 7, .gpio_base = 0, - .gpio_irq_base = IRQ_U300_GPIO_BASE, - .pinctrl_device = &pinctrl_device, }; static struct platform_device gpio_device = { @@ -1590,6 +1586,7 @@ static struct platform_device *platform_devs[] __initdata = { &i2c1_device, &keypad_device, &rtc_device, + &pinctrl_device, &gpio_device, &nand_device, &wdog_device, @@ -1804,7 +1801,7 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ .atag_offset = 0x100, .map_io = u300_map_io, - .nr_irqs = NR_IRQS_U300, + .nr_irqs = 0, .init_irq = u300_init_irq, .handle_irq = vic_handle_irq, .timer = &u300_timer, diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index e27425a63fa1..21d5e76a6cd3 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,79 +12,69 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 1 -#define IRQ_U300_INTCON1_START 33 +#define IRQ_U300_INTCON0_START 32 +#define IRQ_U300_INTCON1_START 64 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 1 -#define IRQ_U300_IRQ1_EXT 2 -#define IRQ_U300_DMA 3 -#define IRQ_U300_VIDEO_ENC_0 4 -#define IRQ_U300_VIDEO_ENC_1 5 -#define IRQ_U300_AAIF_RX 6 -#define IRQ_U300_AAIF_TX 7 -#define IRQ_U300_AAIF_VGPIO 8 -#define IRQ_U300_AAIF_WAKEUP 9 -#define IRQ_U300_PCM_I2S0_FRAME 10 -#define IRQ_U300_PCM_I2S0_FIFO 11 -#define IRQ_U300_PCM_I2S1_FRAME 12 -#define IRQ_U300_PCM_I2S1_FIFO 13 -#define IRQ_U300_XGAM_GAMCON 14 -#define IRQ_U300_XGAM_CDI 15 -#define IRQ_U300_XGAM_CDICON 16 -#define IRQ_U300_XGAM_PDI 18 -#define IRQ_U300_XGAM_PDICON 19 -#define IRQ_U300_XGAM_GAMEACC 20 -#define IRQ_U300_XGAM_MCIDCT 21 -#define IRQ_U300_APEX 22 -#define IRQ_U300_UART0 23 -#define IRQ_U300_SPI 24 -#define IRQ_U300_TIMER_APP_OS 25 -#define IRQ_U300_TIMER_APP_DD 26 -#define IRQ_U300_TIMER_APP_GP1 27 -#define IRQ_U300_TIMER_APP_GP2 28 -#define IRQ_U300_TIMER_OS 29 -#define IRQ_U300_TIMER_MS 30 -#define IRQ_U300_KEYPAD_KEYBF 31 -#define IRQ_U300_KEYPAD_KEYBR 32 +#define IRQ_U300_IRQ0_EXT 32 +#define IRQ_U300_IRQ1_EXT 33 +#define IRQ_U300_DMA 34 +#define IRQ_U300_VIDEO_ENC_0 35 +#define IRQ_U300_VIDEO_ENC_1 36 +#define IRQ_U300_AAIF_RX 37 +#define IRQ_U300_AAIF_TX 38 +#define IRQ_U300_AAIF_VGPIO 39 +#define IRQ_U300_AAIF_WAKEUP 40 +#define IRQ_U300_PCM_I2S0_FRAME 41 +#define IRQ_U300_PCM_I2S0_FIFO 42 +#define IRQ_U300_PCM_I2S1_FRAME 43 +#define IRQ_U300_PCM_I2S1_FIFO 44 +#define IRQ_U300_XGAM_GAMCON 45 +#define IRQ_U300_XGAM_CDI 46 +#define IRQ_U300_XGAM_CDICON 47 +#define IRQ_U300_XGAM_PDI 49 +#define IRQ_U300_XGAM_PDICON 50 +#define IRQ_U300_XGAM_GAMEACC 51 +#define IRQ_U300_XGAM_MCIDCT 52 +#define IRQ_U300_APEX 53 +#define IRQ_U300_UART0 54 +#define IRQ_U300_SPI 55 +#define IRQ_U300_TIMER_APP_OS 56 +#define IRQ_U300_TIMER_APP_DD 57 +#define IRQ_U300_TIMER_APP_GP1 58 +#define IRQ_U300_TIMER_APP_GP2 59 +#define IRQ_U300_TIMER_OS 60 +#define IRQ_U300_TIMER_MS 61 +#define IRQ_U300_KEYPAD_KEYBF 62 +#define IRQ_U300_KEYPAD_KEYBR 63 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 33 -#define IRQ_U300_GPIO_PORT1 34 -#define IRQ_U300_GPIO_PORT2 35 +#define IRQ_U300_GPIO_PORT0 64 +#define IRQ_U300_GPIO_PORT1 65 +#define IRQ_U300_GPIO_PORT2 66 /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 36 -#define IRQ_U300_EVHIST 37 -#define IRQ_U300_MSPRO 38 -#define IRQ_U300_MMCSD_MCIINTR0 39 -#define IRQ_U300_MMCSD_MCIINTR1 40 -#define IRQ_U300_I2C0 41 -#define IRQ_U300_I2C1 42 -#define IRQ_U300_RTC 43 -#define IRQ_U300_NFIF 44 -#define IRQ_U300_NFIF2 45 +#define IRQ_U300_WDOG 67 +#define IRQ_U300_EVHIST 68 +#define IRQ_U300_MSPRO 69 +#define IRQ_U300_MMCSD_MCIINTR0 70 +#define IRQ_U300_MMCSD_MCIINTR1 71 +#define IRQ_U300_I2C0 72 +#define IRQ_U300_I2C1 73 +#define IRQ_U300_RTC 74 +#define IRQ_U300_NFIF 75 +#define IRQ_U300_NFIF2 76 /* The DB3350-specific interrupt lines */ -#define IRQ_U300_ISP_F0 46 -#define IRQ_U300_ISP_F1 47 -#define IRQ_U300_ISP_F2 48 -#define IRQ_U300_ISP_F3 49 -#define IRQ_U300_ISP_F4 50 -#define IRQ_U300_GPIO_PORT3 51 -#define IRQ_U300_SYSCON_PLL_LOCK 52 -#define IRQ_U300_UART1 53 -#define IRQ_U300_GPIO_PORT4 54 -#define IRQ_U300_GPIO_PORT5 55 -#define IRQ_U300_GPIO_PORT6 56 -#define U300_VIC_IRQS_END 57 - -/* Maximum 8*7 GPIO lines */ -#ifdef CONFIG_PINCTRL_COH901 -#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) -#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) -#else -#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) -#endif - -#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define IRQ_U300_ISP_F0 77 +#define IRQ_U300_ISP_F1 78 +#define IRQ_U300_ISP_F2 79 +#define IRQ_U300_ISP_F3 80 +#define IRQ_U300_ISP_F4 81 +#define IRQ_U300_GPIO_PORT3 82 +#define IRQ_U300_SYSCON_PLL_LOCK 83 +#define IRQ_U300_UART1 84 +#define IRQ_U300_GPIO_PORT4 85 +#define IRQ_U300_GPIO_PORT5 86 +#define IRQ_U300_GPIO_PORT6 87 +#define U300_VIC_IRQS_END 88 #endif diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 070629a95625..33631c9f1218 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -7,9 +7,8 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> #include <plat/ste_dma40.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index a267c6d30e37..c34d4efd0d5c 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -9,10 +9,9 @@ #include <linux/bug.h> #include <linux/string.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 416d436111f2..e6ad161449da 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -1,6 +1,5 @@ - /* - * Copyright (C) 2008-2009 ST-Ericsson + * Copyright (C) 2008-2012 ST-Ericsson * * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> * @@ -16,6 +15,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-nomadik.h> +#include <linux/platform_data/db8500_thermal.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -37,13 +37,13 @@ #include <linux/of_platform.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> #include <plat/ste_dma40.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -229,6 +229,67 @@ static struct ab8500_platform_data ab8500_platdata = { }; /* + * Thermal Sensor + */ + +static struct resource db8500_thsens_resources[] = { + { + .name = "IRQ_HOTMON_LOW", + .start = IRQ_PRCMU_HOTMON_LOW, + .end = IRQ_PRCMU_HOTMON_LOW, + .flags = IORESOURCE_IRQ, + }, + { + .name = "IRQ_HOTMON_HIGH", + .start = IRQ_PRCMU_HOTMON_HIGH, + .end = IRQ_PRCMU_HOTMON_HIGH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct db8500_thsens_platform_data db8500_thsens_data = { + .trip_points[0] = { + .temp = 70000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[1] = { + .temp = 75000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[2] = { + .temp = 80000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[3] = { + .temp = 85000, + .type = THERMAL_TRIP_CRITICAL, + }, + .num_trips = 4, +}; + +static struct platform_device u8500_thsens_device = { + .name = "db8500-thermal", + .resource = db8500_thsens_resources, + .num_resources = ARRAY_SIZE(db8500_thsens_resources), + .dev = { + .platform_data = &db8500_thsens_data, + }, +}; + +static struct platform_device u8500_cpufreq_cooling_device = { + .name = "db8500-cpufreq-cooling", +}; + +/* * TPS61052 */ @@ -583,6 +644,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, + &u8500_thsens_device, + &u8500_cpufreq_cooling_device, }; static void __init mop500_init_machine(void) @@ -701,6 +764,16 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .init_late = ux500_init_late, MACHINE_END +MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520") + .atag_offset = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + .timer = &ux500_timer, + .handle_irq = gic_handle_irq, + .init_machine = mop500_init_machine, + .init_late = ux500_init_late, +MACHINE_END + MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .atag_offset = 0x100, .smp = smp_ops(ux500_smp_ops), diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index bcdfe6b1d453..5c5ad70e48be 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -17,14 +17,15 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mfd/abx500/ab8500.h> +#include <linux/platform_data/usb-musb-ux500.h> +#include <linux/platform_data/pinctrl-nomadik.h> +#include <linux/random.h> #include <asm/pmu.h> #include <asm/mach/map.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> -#include <linux/platform_data/usb-musb-ux500.h> #include <mach/db8500-regs.h> #include "devices-db8500.h" @@ -158,7 +159,7 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); - dbx500_add_pinctrl(parent, "pinctrl-db8500"); + dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); } static int usb_db8500_rx_dma_cfg[] = { @@ -187,6 +188,8 @@ static const char *db8500_read_soc_id(void) { void __iomem *uid = __io_address(U8500_BB_UID_BASE); + /* Throw these device-specific numbers into the entropy pool */ + add_device_randomness(uid, 0x14); return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+1), readl((u32 *)uid+1), readl((u32 *)uid+2), @@ -214,9 +217,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) db8500_add_gpios(parent); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -236,9 +236,6 @@ struct device * __init u8500_of_init_devices(void) db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - u8500_dma40_device.dev.parent = parent; /* diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index dfdd4a54668d..692a77a1c153 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -11,8 +11,7 @@ #include <linux/irq.h> #include <linux/slab.h> #include <linux/platform_device.h> - -#include <plat/gpio-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 7fbf0ba336e1..96fa4ac89e2e 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -129,12 +129,18 @@ void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, int irq, struct nmk_gpio_platform_data *pdata); static inline void -dbx500_add_pinctrl(struct device *parent, const char *name) +dbx500_add_pinctrl(struct device *parent, const char *name, + resource_size_t base) { + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_8K), + }; struct platform_device_info pdevinfo = { .parent = parent, .name = name, .id = -1, + .res = res, + .num_res = ARRAY_SIZE(res), }; platform_device_register_full(&pdevinfo); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 5b5c1eeb5b5c..5d5929450366 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -32,6 +32,7 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/irqchip/versatile-fpga.h> #include <linux/gfp.h> #include <linux/clkdev.h> #include <linux/mtd/physmap.h> @@ -51,7 +52,6 @@ #include <asm/hardware/timer-sp.h> #include <plat/clcd.h> -#include <plat/fpga-irq.h> #include <plat/sched_clock.h> #include "core.h" diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index c95296066203..99e63f5f99d1 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,11 +1,12 @@ config ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 select CLKDEV_LOOKUP select COMMON_CLK + select COMMON_CLK_VERSATILE select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_CLK @@ -17,6 +18,7 @@ config ARCH_VEXPRESS select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select REGULATOR_FIXED_VOLTAGE if REGULATOR + select VEXPRESS_CONFIG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 42703e8b4d3b..80b64971fbdd 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,7 +4,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-versatile/include -obj-y := v2m.o +obj-y := v2m.o reset.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 4f471fa3e3c5..60838ddb8564 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -9,6 +9,7 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/clkdev.h> +#include <linux/vexpress.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> @@ -64,19 +65,6 @@ static void __init ct_ca9x4_init_irq(void) ca9x4_twd_init(); } -static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) -{ - u32 site = v2m_get_master_site(); - - /* - * Old firmware was using the "site" component of the command - * to control the DVI muxer (while it should be always 0 ie. MB). - * Newer firmware uses the data register. Keep both for compatibility. - */ - v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site); - v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2); -} - static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) { unsigned long framesize = 1024 * 768 * 2; @@ -93,7 +81,6 @@ static struct clcd_board ct_ca9x4_clcd_data = { .caps = CLCD_CAP_5551 | CLCD_CAP_565, .check = clcdfb_check, .decode = clcdfb_decode, - .enable = ct_ca9x4_clcd_enable, .setup = ct_ca9x4_clcd_setup, .mmap = versatile_clcd_mmap_dma, .remove = versatile_clcd_remove_dma, @@ -111,14 +98,6 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &gpio_device, }; - -static struct v2m_osc ct_osc1 = { - .osc = 1, - .rate_min = 10000000, - .rate_max = 80000000, - .rate_default = 23750000, -}; - static struct resource pmu_resources[] = { [0] = { .start = IRQ_CT_CA9X4_PMU_CPU0, @@ -149,10 +128,18 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct platform_device osc1_device = { + .name = "vexpress-osc", + .id = 1, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0xf, 1), + }, +}; + static void __init ct_ca9x4_init(void) { int i; - struct clk *clk; #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); @@ -164,14 +151,14 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif - ct_osc1.site = v2m_get_master_site(); - clk = v2m_osc_register("ct:osc1", &ct_osc1); - clk_register_clkdev(clk, NULL, "ct:clcd"); - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); platform_device_register(&pmu_device); + platform_device_register(&osc1_device); + + WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev), + NULL, "ct:clcd")); } #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 1e388c7bf4d7..68abc8b72781 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -1,8 +1,6 @@ #ifndef __MACH_MOTHERBOARD_H #define __MACH_MOTHERBOARD_H -#include <linux/clk-provider.h> - /* * Physical addresses, offset from V2M_PA_CS0-3 */ @@ -41,31 +39,6 @@ #define V2M_CF (V2M_PA_CS7 + 0x0001a000) #define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) -/* - * Offsets from SYSREGS base - */ -#define V2M_SYS_ID 0x000 -#define V2M_SYS_SW 0x004 -#define V2M_SYS_LED 0x008 -#define V2M_SYS_100HZ 0x024 -#define V2M_SYS_FLAGS 0x030 -#define V2M_SYS_FLAGSSET 0x030 -#define V2M_SYS_FLAGSCLR 0x034 -#define V2M_SYS_NVFLAGS 0x038 -#define V2M_SYS_NVFLAGSSET 0x038 -#define V2M_SYS_NVFLAGSCLR 0x03c -#define V2M_SYS_MCI 0x048 -#define V2M_SYS_FLASH 0x03c -#define V2M_SYS_CFGSW 0x058 -#define V2M_SYS_24MHZ 0x05c -#define V2M_SYS_MISC 0x060 -#define V2M_SYS_DMA 0x064 -#define V2M_SYS_PROCID0 0x084 -#define V2M_SYS_PROCID1 0x088 -#define V2M_SYS_CFGDATA 0x0a0 -#define V2M_SYS_CFGCTRL 0x0a4 -#define V2M_SYS_CFGSTAT 0x0a8 - /* * Interrupts. Those in {} are for AMBA devices @@ -91,43 +64,6 @@ /* - * Configuration - */ -#define SYS_CFG_START (1 << 31) -#define SYS_CFG_WRITE (1 << 30) -#define SYS_CFG_OSC (1 << 20) -#define SYS_CFG_VOLT (2 << 20) -#define SYS_CFG_AMP (3 << 20) -#define SYS_CFG_TEMP (4 << 20) -#define SYS_CFG_RESET (5 << 20) -#define SYS_CFG_SCC (6 << 20) -#define SYS_CFG_MUXFPGA (7 << 20) -#define SYS_CFG_SHUTDOWN (8 << 20) -#define SYS_CFG_REBOOT (9 << 20) -#define SYS_CFG_DVIMODE (11 << 20) -#define SYS_CFG_POWER (12 << 20) -#define SYS_CFG_SITE(n) ((n) << 16) -#define SYS_CFG_SITE_MB 0 -#define SYS_CFG_SITE_DB1 1 -#define SYS_CFG_SITE_DB2 2 -#define SYS_CFG_STACK(n) ((n) << 12) - -#define SYS_CFG_ERR (1 << 1) -#define SYS_CFG_COMPLETE (1 << 0) - -int v2m_cfg_write(u32 devfn, u32 data); -int v2m_cfg_read(u32 devfn, u32 *data); -void v2m_flags_set(u32 data); - -/* - * Miscellaneous - */ -#define SYS_MISC_MASTERSITE (1 << 14) -#define SYS_PROCIDx_HBI_MASK 0xfff - -int v2m_get_master_site(void); - -/* * Core tile IDs */ #define V2M_CT_ID_CA9 0x0c000191 @@ -149,21 +85,4 @@ struct ct_desc { extern struct ct_desc *ct_desc; -/* - * OSC clock provider - */ -struct v2m_osc { - struct clk_hw hw; - u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */ - u8 stack; /* board stack position */ - u16 osc; - unsigned long rate_min; - unsigned long rate_max; - unsigned long rate_default; -}; - -#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw) - -struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc); - #endif diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 7db27c8c05cc..c5d70de9bb4e 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <linux/io.h> #include <linux/of_fdt.h> +#include <linux/vexpress.h> #include <asm/smp_scu.h> #include <asm/hardware/gic.h> @@ -193,7 +194,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - v2m_flags_set(virt_to_phys(versatile_secondary_startup)); + vexpress_flags_set(virt_to_phys(versatile_secondary_startup)); } struct smp_operations __initdata vexpress_smp_ops = { diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 560e0df728f8..011661a6c5cb 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -16,11 +16,10 @@ #include <linux/smsc911x.h> #include <linux/spinlock.h> #include <linux/usb/isp1760.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> #include <linux/mtd/physmap.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> +#include <linux/vexpress.h> #include <asm/arch_timer.h> #include <asm/mach-types.h> @@ -33,7 +32,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> #include <asm/hardware/timer-sp.h> -#include <asm/hardware/sp810.h> #include <mach/ct-ca9x4.h> #include <mach/motherboard.h> @@ -58,22 +56,6 @@ static struct map_desc v2m_io_desc[] __initdata = { }, }; -static void __iomem *v2m_sysreg_base; - -static void __init v2m_sysctl_init(void __iomem *base) -{ - u32 scctrl; - - if (WARN_ON(!base)) - return; - - /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ - scctrl = readl(base + SCCTRL); - scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; - scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; - writel(scctrl, base + SCCTRL); -} - static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) { if (WARN_ON(!base || irq == NO_IRQ)) @@ -87,69 +69,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) } -static DEFINE_SPINLOCK(v2m_cfg_lock); - -int v2m_cfg_write(u32 devfn, u32 data) -{ - /* Configuration interface broken? */ - u32 val; - - printk("%s: writing %08x to %08x\n", __func__, data, devfn); - - devfn |= SYS_CFG_START | SYS_CFG_WRITE; - - spin_lock(&v2m_cfg_lock); - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT); - - writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA); - writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); - - do { - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - } while (val == 0); - spin_unlock(&v2m_cfg_lock); - - return !!(val & SYS_CFG_ERR); -} - -int v2m_cfg_read(u32 devfn, u32 *data) -{ - u32 val; - - devfn |= SYS_CFG_START; - - spin_lock(&v2m_cfg_lock); - writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); - - mb(); - - do { - cpu_relax(); - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - } while (val == 0); - - *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA); - spin_unlock(&v2m_cfg_lock); - - return !!(val & SYS_CFG_ERR); -} - -void __init v2m_flags_set(u32 data) -{ - writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR); - writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET); -} - -int v2m_get_master_site(void) -{ - u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); - - return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1; -} - - static struct resource v2m_pcie_i2c_resource = { .start = V2M_SERIAL_BUS_PCI, .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1, @@ -237,14 +156,8 @@ static struct platform_device v2m_usb_device = { .dev.platform_data = &v2m_usb_config, }; -static void v2m_flash_set_vpp(struct platform_device *pdev, int on) -{ - writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH); -} - static struct physmap_flash_data v2m_flash_data = { .width = 4, - .set_vpp = v2m_flash_set_vpp, }; static struct resource v2m_flash_resources[] = { @@ -291,14 +204,61 @@ static struct platform_device v2m_cf_device = { .dev.platform_data = &v2m_pata_data, }; -static unsigned int v2m_mmci_status(struct device *dev) -{ - return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0); -} - static struct mmci_platform_data v2m_mmci_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = v2m_mmci_status, + .gpio_wp = VEXPRESS_GPIO_MMC_WPROT, + .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN, +}; + +static struct resource v2m_sysreg_resources[] = { + { + .start = V2M_SYSREGS, + .end = V2M_SYSREGS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_sysreg_device = { + .name = "vexpress-sysreg", + .id = -1, + .resource = v2m_sysreg_resources, + .num_resources = ARRAY_SIZE(v2m_sysreg_resources), +}; + +static struct platform_device v2m_muxfpga_device = { + .name = "vexpress-muxfpga", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 7), + } +}; + +static struct platform_device v2m_shutdown_device = { + .name = "vexpress-shutdown", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 8), + } +}; + +static struct platform_device v2m_reboot_device = { + .name = "vexpress-reboot", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 9), + } +}; + +static struct platform_device v2m_dvimode_device = { + .name = "vexpress-dvimode", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 11), + } }; static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); @@ -325,123 +285,9 @@ static struct amba_device *v2m_amba_devs[] __initdata = { &rtc_device, }; - -static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - return !parent_rate ? osc->rate_default : parent_rate; -} - -static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - if (WARN_ON(rate < osc->rate_min)) - rate = osc->rate_min; - - if (WARN_ON(rate > osc->rate_max)) - rate = osc->rate_max; - - return rate; -} - -static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) | - SYS_CFG_STACK(osc->stack) | osc->osc, rate); - - return 0; -} - -static struct clk_ops v2m_osc_ops = { - .recalc_rate = v2m_osc_recalc_rate, - .round_rate = v2m_osc_round_rate, - .set_rate = v2m_osc_set_rate, -}; - -struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc) -{ - struct clk_init_data init; - - WARN_ON(osc->site > 2); - WARN_ON(osc->stack > 15); - WARN_ON(osc->osc > 4095); - - init.name = name; - init.ops = &v2m_osc_ops; - init.flags = CLK_IS_ROOT; - init.num_parents = 0; - - osc->hw.init = &init; - - return clk_register(NULL, &osc->hw); -} - -static struct v2m_osc v2m_mb_osc1 = { - .site = SYS_CFG_SITE_MB, - .osc = 1, - .rate_min = 23750000, - .rate_max = 63500000, - .rate_default = 23750000, -}; - -static const char *v2m_ref_clk_periphs[] __initconst = { - "mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */ -}; - -static const char *v2m_osc1_periphs[] __initconst = { - "mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */ -}; - -static const char *v2m_osc2_periphs[] __initconst = { - "mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */ - "mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */ - "mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */ - "mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */ - "mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */ - "mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */ - "mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */ -}; - -static void __init v2m_clk_init(void) -{ - struct clk *clk; - int i; - - clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, - CLK_IS_ROOT, 0); - WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); - - clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL, - CLK_IS_ROOT, 32768); - for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i])); - - clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL, - CLK_IS_ROOT, 1000000); - WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804")); - WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804")); - - clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1); - for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i])); - - clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL, - CLK_IS_ROOT, 24000000); - for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i])); -} - static void __init v2m_timer_init(void) { - v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); - v2m_clk_init(); + vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K)); v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); } @@ -453,19 +299,7 @@ static void __init v2m_init_early(void) { if (ct_desc->init_early) ct_desc->init_early(); - versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); -} - -static void v2m_power_off(void) -{ - if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) - printk(KERN_EMERG "Unable to shutdown\n"); -} - -static void v2m_restart(char str, const char *cmd) -{ - if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) - printk(KERN_EMERG "Unable to reboot\n"); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); } struct ct_desc *ct_desc; @@ -482,7 +316,7 @@ static void __init v2m_populate_ct_desc(void) u32 current_tile_id; ct_desc = NULL; - current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0) + current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER) & V2M_CT_ID_MASK; for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i) @@ -498,7 +332,7 @@ static void __init v2m_populate_ct_desc(void) static void __init v2m_map_io(void) { iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); - v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K); + vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K)); v2m_populate_ct_desc(); ct_desc->map_io(); } @@ -515,6 +349,12 @@ static void __init v2m_init(void) regulator_register_fixed(0, v2m_eth_supplies, ARRAY_SIZE(v2m_eth_supplies)); + platform_device_register(&v2m_muxfpga_device); + platform_device_register(&v2m_shutdown_device); + platform_device_register(&v2m_reboot_device); + platform_device_register(&v2m_dvimode_device); + + platform_device_register(&v2m_sysreg_device); platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); @@ -525,7 +365,7 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); - pm_power_off = v2m_power_off; + pm_power_off = vexpress_power_off; ct_desc->init_tile(); } @@ -539,7 +379,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .timer = &v2m_timer, .handle_irq = gic_handle_irq, .init_machine = v2m_init, - .restart = v2m_restart, + .restart = vexpress_restart, MACHINE_END static struct map_desc v2m_rs1_io_desc __initdata = { @@ -580,20 +420,13 @@ void __init v2m_dt_map_io(void) void __init v2m_dt_init_early(void) { - struct device_node *node; u32 dt_hbi; - node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); - v2m_sysreg_base = of_iomap(node, 0); - if (WARN_ON(!v2m_sysreg_base)) - return; + vexpress_sysreg_of_early_init(); /* Confirm board type against DT property, if available */ - if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { - int site = v2m_get_master_site(); - u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ? - V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); - u32 hbi = id & SYS_PROCIDx_HBI_MASK; + if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { + u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); if (WARN_ON(dt_hbi != hbi)) pr_warning("vexpress: DT HBI (%x) is not matching " @@ -613,51 +446,47 @@ static void __init v2m_dt_init_irq(void) static void __init v2m_dt_timer_init(void) { - struct device_node *node; - const char *path; - int err; + struct device_node *node = NULL; - node = of_find_compatible_node(NULL, NULL, "arm,sp810"); - v2m_sysctl_init(of_iomap(node, 0)); + vexpress_clk_of_init(); - v2m_clk_init(); + do { + node = of_find_compatible_node(node, NULL, "arm,sp804"); + } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); + if (node) { + pr_info("Using SP804 '%s' as a clock & events source\n", + node->full_name); + v2m_sp804_init(of_iomap(node, 0), + irq_of_parse_and_map(node, 0)); + } - err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0)); if (arch_timer_of_register() != 0) twd_local_timer_of_register(); if (arch_timer_sched_clock_init() != 0) - versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), + 24000000); } static struct sys_timer v2m_dt_timer = { .init = v2m_dt_timer_init, }; -static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash", - &v2m_flash_data), - OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data), - /* RS1 memory map */ - OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash", - &v2m_flash_data), - OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data), +static const struct of_device_id v2m_dt_bus_match[] __initconst = { + { .compatible = "simple-bus", }, + { .compatible = "arm,amba-bus", }, + { .compatible = "arm,vexpress,config-bus", }, {} }; static void __init v2m_dt_init(void) { l2x0_of_init(0x00400000, 0xfe0fffff); - of_platform_populate(NULL, of_default_bus_match_table, - v2m_dt_auxdata_lookup, NULL); - pm_power_off = v2m_power_off; + of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); + pm_power_off = vexpress_power_off; } -const static char *v2m_dt_match[] __initconst = { +static const char * const v2m_dt_match[] __initconst = { "arm,vexpress", "xen,xenvm", NULL, @@ -672,5 +501,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .timer = &v2m_dt_timer, .init_machine = v2m_dt_init, .handle_irq = gic_handle_irq, - .restart = v2m_restart, + .restart = vexpress_restart, MACHINE_END diff --git a/arch/arm/mach-vt8500/include/mach/hardware.h b/arch/arm/mach-vt8500/include/mach/hardware.h deleted file mode 100644 index db4163f72c39..000000000000 --- a/arch/arm/mach-vt8500/include/mach/hardware.h +++ /dev/null @@ -1,12 +0,0 @@ -/* arch/arm/mach-vt8500/include/mach/hardware.h - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ diff --git a/arch/arm/mach-vt8500/include/mach/i8042.h b/arch/arm/mach-vt8500/include/mach/i8042.h deleted file mode 100644 index cd7143cad6f3..000000000000 --- a/arch/arm/mach-vt8500/include/mach/i8042.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-vt8500/include/mach/i8042.h - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -extern unsigned long wmt_i8042_base __initdata; -extern int wmt_i8042_kbd_irq; -extern int wmt_i8042_aux_irq; diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h deleted file mode 100644 index 738979518acb..000000000000 --- a/arch/arm/mach-vt8500/include/mach/restart.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-vt8500/restart.h - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -void vt8500_setup_restart(void); -void vt8500_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c index 050e1833f2d0..3dd21a47881f 100644 --- a/arch/arm/mach-vt8500/timer.c +++ b/arch/arm/mach-vt8500/timer.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-vt8500/timer_dt.c + * arch/arm/mach-vt8500/timer.c * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 8d3871f110a5..a5bd28692b06 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -31,8 +31,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <mach/restart.h> - #include "common.h" #define LEGACY_GPIO_BASE 0xD8110000 diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index ab5cfddc0d7b..ba8d14f78d4d 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -31,7 +31,6 @@ #include <asm/hardware/cache-l2x0.h> #include <mach/zynq_soc.h> -#include <mach/clkdev.h> #include "common.h" static struct of_device_id zynq_of_bus_ids[] __initdata = { @@ -45,22 +44,25 @@ static struct of_device_id zynq_of_bus_ids[] __initdata = { */ static void __init xilinx_init_machine(void) { -#ifdef CONFIG_CACHE_L2X0 /* * 64KB way size, 8-way associativity, parity disabled */ - l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF); -#endif + l2x0_of_init(0x02060000, 0xF0F0FFFF); of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); } +static struct of_device_id irq_match[] __initdata = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + { } +}; + /** * xilinx_irq_init() - Interrupt controller initialization for the GIC. */ static void __init xilinx_irq_init(void) { - gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE); + of_irq_init(irq_match); } /* The minimum devices needed to be mapped before the VM system is up and @@ -71,17 +73,12 @@ static struct map_desc io_desc[] __initdata = { { .virtual = TTC0_VIRT, .pfn = __phys_to_pfn(TTC0_PHYS), - .length = SZ_4K, + .length = TTC0_SIZE, .type = MT_DEVICE, }, { .virtual = SCU_PERIPH_VIRT, .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), - .length = SZ_8K, - .type = MT_DEVICE, - }, { - .virtual = PL310_L2CC_VIRT, - .pfn = __phys_to_pfn(PL310_L2CC_PHYS), - .length = SZ_4K, + .length = SCU_PERIPH_SIZE, .type = MT_DEVICE, }, @@ -89,7 +86,7 @@ static struct map_desc io_desc[] __initdata = { { .virtual = UART0_VIRT, .pfn = __phys_to_pfn(UART0_PHYS), - .length = SZ_4K, + .length = UART0_SIZE, .type = MT_DEVICE, }, #endif diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h deleted file mode 100644 index c6e73d81a459..000000000000 --- a/arch/arm/mach-zynq/include/mach/clkdev.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-zynq/include/mach/clkdev.h - * - * Copyright (C) 2011 Xilinx, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#include <plat/clock.h> - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - const struct icst_params *params; - void __iomem *vcoreg; -}; - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h index d0d3f8fb06dd..1b8bf0ecbcb0 100644 --- a/arch/arm/mach-zynq/include/mach/zynq_soc.h +++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h @@ -15,33 +15,32 @@ #ifndef __MACH_XILINX_SOC_H__ #define __MACH_XILINX_SOC_H__ +#include <asm/pgtable.h> + #define PERIPHERAL_CLOCK_RATE 2500000 -/* For now, all mappings are flat (physical = virtual) +/* Static peripheral mappings are mapped at the top of the vmalloc region. The + * early uart mapping causes intermediate problems/failure at certain + * addresses, including the very top of the vmalloc region. Map it at an + * address that is known to work. */ -#define UART0_PHYS 0xE0000000 -#define UART0_VIRT UART0_PHYS - -#define TTC0_PHYS 0xF8001000 -#define TTC0_VIRT TTC0_PHYS +#define UART0_PHYS 0xE0000000 +#define UART0_SIZE SZ_4K +#define UART0_VIRT 0xF0001000 -#define PL310_L2CC_PHYS 0xF8F02000 -#define PL310_L2CC_VIRT PL310_L2CC_PHYS +#define TTC0_PHYS 0xF8001000 +#define TTC0_SIZE SZ_4K +#define TTC0_VIRT (VMALLOC_END - TTC0_SIZE) -#define SCU_PERIPH_PHYS 0xF8F00000 -#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS +#define SCU_PERIPH_PHYS 0xF8F00000 +#define SCU_PERIPH_SIZE SZ_8K +#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE) /* The following are intended for the devices that are mapped early */ #define TTC0_BASE IOMEM(TTC0_VIRT) #define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT) -#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100) -#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000) -#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT) -/* - * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical - */ #define LL_UART_PADDR UART0_PHYS #define LL_UART_VADDR UART0_VIRT diff --git a/arch/arm/mm/cache-aurora-l2.h b/arch/arm/mm/cache-aurora-l2.h new file mode 100644 index 000000000000..c86124769831 --- /dev/null +++ b/arch/arm/mm/cache-aurora-l2.h @@ -0,0 +1,55 @@ +/* + * AURORA shared L2 cache controller support + * + * Copyright (C) 2012 Marvell + * + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_HARDWARE_AURORA_L2_H +#define __ASM_ARM_HARDWARE_AURORA_L2_H + +#define AURORA_SYNC_REG 0x700 +#define AURORA_RANGE_BASE_ADDR_REG 0x720 +#define AURORA_FLUSH_PHY_ADDR_REG 0x7f0 +#define AURORA_INVAL_RANGE_REG 0x774 +#define AURORA_CLEAN_RANGE_REG 0x7b4 +#define AURORA_FLUSH_RANGE_REG 0x7f4 + +#define AURORA_ACR_REPLACEMENT_OFFSET 27 +#define AURORA_ACR_REPLACEMENT_MASK \ + (0x3 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_WAYRR \ + (0 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_LFSR \ + (1 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU \ + (3 << AURORA_ACR_REPLACEMENT_OFFSET) + +#define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET 0 +#define AURORA_ACR_FORCE_WRITE_POLICY_MASK \ + (0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_POLICY_DIS \ + (0 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_BACK_POLICY \ + (1 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_THRO_POLICY \ + (2 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) + +#define MAX_RANGE_SIZE 1024 + +#define AURORA_WAY_SIZE_SHIFT 2 + +#define AURORA_CTRL_FW 0x100 + +/* chose a number outside L2X0_CACHE_ID_PART_MASK to be sure to make + * the distinction between a number coming from hardware and a number + * coming from the device tree */ +#define AURORA_CACHE_ID 0x100 + +#endif /* __ASM_ARM_HARDWARE_AURORA_L2_H */ diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 8a97e6443c62..6911b8b2745c 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -25,6 +25,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#include "cache-aurora-l2.h" #define CACHE_LINE_SIZE 32 @@ -34,14 +35,20 @@ static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; +/* Aurora don't have the cache ID register available, so we have to + * pass it though the device tree */ +static u32 cache_id_part_number_from_dt; + struct l2x0_regs l2x0_saved_regs; struct l2x0_of_data { void (*setup)(const struct device_node *, u32 *, u32 *); void (*save)(void); - void (*resume)(void); + struct outer_cache_fns outer_cache; }; +static bool of_init = false; + static inline void cache_wait_way(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ @@ -168,7 +175,7 @@ static void l2x0_inv_all(void) /* invalidate all ways */ raw_spin_lock_irqsave(&l2x0_lock, flags); /* Invalidating when L2 is enabled is a nono */ - BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1); + BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); cache_sync(); @@ -292,11 +299,18 @@ static void l2x0_unlock(u32 cache_id) int lockregs; int i; - if (cache_id == L2X0_CACHE_ID_PART_L310) + switch (cache_id) { + case L2X0_CACHE_ID_PART_L310: lockregs = 8; - else + break; + case AURORA_CACHE_ID: + lockregs = 4; + break; + default: /* L210 and unknown types */ lockregs = 1; + break; + } for (i = 0; i < lockregs; i++) { writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + @@ -312,18 +326,22 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) u32 cache_id; u32 way_size = 0; int ways; + int way_size_shift = L2X0_WAY_SIZE_SHIFT; const char *type; l2x0_base = base; - - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); + if (cache_id_part_number_from_dt) + cache_id = cache_id_part_number_from_dt; + else + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID) + & L2X0_CACHE_ID_PART_MASK; aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; /* Determine the number of ways */ - switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + switch (cache_id) { case L2X0_CACHE_ID_PART_L310: if (aux & (1 << 16)) ways = 16; @@ -340,6 +358,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) ways = (aux >> 13) & 0xf; type = "L210"; break; + + case AURORA_CACHE_ID: + sync_reg_offset = AURORA_SYNC_REG; + ways = (aux >> 13) & 0xf; + ways = 2 << ((ways + 1) >> 2); + way_size_shift = AURORA_WAY_SIZE_SHIFT; + type = "Aurora"; + break; default: /* Assume unknown chips have 8 ways */ ways = 8; @@ -353,7 +379,8 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) * L2 cache Size = Way size * Number of ways */ way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17; - way_size = 1 << (way_size + 3); + way_size = 1 << (way_size + way_size_shift); + l2x0_size = ways * way_size * SZ_1K; /* @@ -361,7 +388,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) * If you are booting from non-secure mode * accessing the below registers will fault. */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* Make sure that I&D is not locked down when starting */ l2x0_unlock(cache_id); @@ -371,7 +398,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) l2x0_inv_all(); /* enable L2X0 */ - writel_relaxed(1, l2x0_base + L2X0_CTRL); + writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); } /* Re-read it in case some bits are reserved. */ @@ -380,13 +407,15 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) /* Save the value for resuming. */ l2x0_saved_regs.aux_ctrl = aux; - outer_cache.inv_range = l2x0_inv_range; - outer_cache.clean_range = l2x0_clean_range; - outer_cache.flush_range = l2x0_flush_range; - outer_cache.sync = l2x0_cache_sync; - outer_cache.flush_all = l2x0_flush_all; - outer_cache.inv_all = l2x0_inv_all; - outer_cache.disable = l2x0_disable; + if (!of_init) { + outer_cache.inv_range = l2x0_inv_range; + outer_cache.clean_range = l2x0_clean_range; + outer_cache.flush_range = l2x0_flush_range; + outer_cache.sync = l2x0_cache_sync; + outer_cache.flush_all = l2x0_flush_all; + outer_cache.inv_all = l2x0_inv_all; + outer_cache.disable = l2x0_disable; + } printk(KERN_INFO "%s cache controller enabled\n", type); printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", @@ -394,6 +423,100 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) } #ifdef CONFIG_OF +static int l2_wt_override; + +/* + * Note that the end addresses passed to Linux primitives are + * noninclusive, while the hardware cache range operations use + * inclusive start and end addresses. + */ +static unsigned long calc_range_end(unsigned long start, unsigned long end) +{ + /* + * Limit the number of cache lines processed at once, + * since cache range operations stall the CPU pipeline + * until completion. + */ + if (end > start + MAX_RANGE_SIZE) + end = start + MAX_RANGE_SIZE; + + /* + * Cache range operations can't straddle a page boundary. + */ + if (end > PAGE_ALIGN(start+1)) + end = PAGE_ALIGN(start+1); + + return end; +} + +/* + * Make sure 'start' and 'end' reference the same page, as L2 is PIPT + * and range operations only do a TLB lookup on the start address. + */ +static void aurora_pa_range(unsigned long start, unsigned long end, + unsigned long offset) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + writel(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG); + writel(end, l2x0_base + offset); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + cache_sync(); +} + +static void aurora_inv_range(unsigned long start, unsigned long end) +{ + /* + * round start and end adresses up to cache line size + */ + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + + /* + * Invalidate all full cache lines between 'start' and 'end'. + */ + while (start < end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_INVAL_RANGE_REG); + start = range_end; + } +} + +static void aurora_clean_range(unsigned long start, unsigned long end) +{ + /* + * If L2 is forced to WT, the L2 will always be clean and we + * don't need to do anything here. + */ + if (!l2_wt_override) { + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + while (start != end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_CLEAN_RANGE_REG); + start = range_end; + } + } +} + +static void aurora_flush_range(unsigned long start, unsigned long end) +{ + if (!l2_wt_override) { + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + while (start != end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_FLUSH_RANGE_REG); + start = range_end; + } + } +} + static void __init l2x0_of_setup(const struct device_node *np, u32 *aux_val, u32 *aux_mask) { @@ -491,9 +614,15 @@ static void __init pl310_save(void) } } +static void aurora_save(void) +{ + l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); +} + static void l2x0_resume(void) { - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* restore aux ctrl and enable l2 */ l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); @@ -502,7 +631,7 @@ static void l2x0_resume(void) l2x0_inv_all(); - writel_relaxed(1, l2x0_base + L2X0_CTRL); + writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); } } @@ -510,7 +639,7 @@ static void pl310_resume(void) { u32 l2x0_revision; - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* restore pl310 setup */ writel_relaxed(l2x0_saved_regs.tag_latency, l2x0_base + L2X0_TAG_LATENCY_CTRL); @@ -536,22 +665,108 @@ static void pl310_resume(void) l2x0_resume(); } +static void aurora_resume(void) +{ + if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + writel(l2x0_saved_regs.aux_ctrl, l2x0_base + L2X0_AUX_CTRL); + writel(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL); + } +} + +static void __init aurora_broadcast_l2_commands(void) +{ + __u32 u; + /* Enable Broadcasting of cache commands to L2*/ + __asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u)); + u |= AURORA_CTRL_FW; /* Set the FW bit */ + __asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u)); + isb(); +} + +static void __init aurora_of_setup(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; + u32 mask = AURORA_ACR_REPLACEMENT_MASK; + + of_property_read_u32(np, "cache-id-part", + &cache_id_part_number_from_dt); + + /* Determine and save the write policy */ + l2_wt_override = of_property_read_bool(np, "wt-override"); + + if (l2_wt_override) { + val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; + mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + static const struct l2x0_of_data pl310_data = { - pl310_of_setup, - pl310_save, - pl310_resume, + .setup = pl310_of_setup, + .save = pl310_save, + .outer_cache = { + .resume = pl310_resume, + .inv_range = l2x0_inv_range, + .clean_range = l2x0_clean_range, + .flush_range = l2x0_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + .set_debug = pl310_set_debug, + }, }; static const struct l2x0_of_data l2x0_data = { - l2x0_of_setup, - NULL, - l2x0_resume, + .setup = l2x0_of_setup, + .save = NULL, + .outer_cache = { + .resume = l2x0_resume, + .inv_range = l2x0_inv_range, + .clean_range = l2x0_clean_range, + .flush_range = l2x0_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + }, +}; + +static const struct l2x0_of_data aurora_with_outer_data = { + .setup = aurora_of_setup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, + .flush_range = aurora_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + }, +}; + +static const struct l2x0_of_data aurora_no_outer_data = { + .setup = aurora_of_setup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + }, }; static const struct of_device_id l2x0_ids[] __initconst = { { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, + { .compatible = "marvell,aurora-system-cache", + .data = (void *)&aurora_no_outer_data}, + { .compatible = "marvell,aurora-outer-cache", + .data = (void *)&aurora_with_outer_data}, {} }; @@ -577,17 +792,24 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; /* L2 configuration can only be changed if the cache is disabled */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { if (data->setup) data->setup(np, &aux_val, &aux_mask); + + /* For aurora cache in no outer mode select the + * correct mode using the coprocessor*/ + if (data == &aurora_no_outer_data) + aurora_broadcast_l2_commands(); } if (data->save) data->save(); + of_init = true; l2x0_init(l2x0_base, aux_val, aux_mask); - outer_cache.resume = data->resume; + memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); + return 0; } #endif diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 4e07eec1270d..bc4a5e9ebb78 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -2,6 +2,9 @@ * linux/arch/arm/mm/context.c * * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved. + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,14 +17,40 @@ #include <linux/percpu.h> #include <asm/mmu_context.h> +#include <asm/smp_plat.h> #include <asm/thread_notify.h> #include <asm/tlbflush.h> +/* + * On ARMv6, we have the following structure in the Context ID: + * + * 31 7 0 + * +-------------------------+-----------+ + * | process ID | ASID | + * +-------------------------+-----------+ + * | context ID | + * +-------------------------------------+ + * + * The ASID is used to tag entries in the CPU caches and TLBs. + * The context ID is used by debuggers and trace logic, and + * should be unique within all running processes. + */ +#define ASID_FIRST_VERSION (1ULL << ASID_BITS) +#define NUM_USER_ASIDS (ASID_FIRST_VERSION - 1) + +#define ASID_TO_IDX(asid) ((asid & ~ASID_MASK) - 1) +#define IDX_TO_ASID(idx) ((idx + 1) & ~ASID_MASK) + static DEFINE_RAW_SPINLOCK(cpu_asid_lock); -unsigned int cpu_last_asid = ASID_FIRST_VERSION; +static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION); +static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS); + +static DEFINE_PER_CPU(atomic64_t, active_asids); +static DEFINE_PER_CPU(u64, reserved_asids); +static cpumask_t tlb_flush_pending; #ifdef CONFIG_ARM_LPAE -void cpu_set_reserved_ttbr0(void) +static void cpu_set_reserved_ttbr0(void) { unsigned long ttbl = __pa(swapper_pg_dir); unsigned long ttbh = 0; @@ -37,7 +66,7 @@ void cpu_set_reserved_ttbr0(void) isb(); } #else -void cpu_set_reserved_ttbr0(void) +static void cpu_set_reserved_ttbr0(void) { u32 ttb; /* Copy TTBR1 into TTBR0 */ @@ -84,124 +113,104 @@ static int __init contextidr_notifier_init(void) arch_initcall(contextidr_notifier_init); #endif -/* - * We fork()ed a process, and we need a new context for the child - * to run in. - */ -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) +static void flush_context(unsigned int cpu) { - mm->context.id = 0; - raw_spin_lock_init(&mm->context.id_lock); -} + int i; + u64 asid; + + /* Update the list of reserved ASIDs and the ASID bitmap. */ + bitmap_clear(asid_map, 0, NUM_USER_ASIDS); + for_each_possible_cpu(i) { + if (i == cpu) { + asid = 0; + } else { + asid = atomic64_xchg(&per_cpu(active_asids, i), 0); + __set_bit(ASID_TO_IDX(asid), asid_map); + } + per_cpu(reserved_asids, i) = asid; + } -static void flush_context(void) -{ - cpu_set_reserved_ttbr0(); - local_flush_tlb_all(); - if (icache_is_vivt_asid_tagged()) { + /* Queue a TLB invalidate and flush the I-cache if necessary. */ + if (!tlb_ops_need_broadcast()) + cpumask_set_cpu(cpu, &tlb_flush_pending); + else + cpumask_setall(&tlb_flush_pending); + + if (icache_is_vivt_asid_tagged()) __flush_icache_all(); - dsb(); - } } -#ifdef CONFIG_SMP +static int is_reserved_asid(u64 asid) +{ + int cpu; + for_each_possible_cpu(cpu) + if (per_cpu(reserved_asids, cpu) == asid) + return 1; + return 0; +} -static void set_mm_context(struct mm_struct *mm, unsigned int asid) +static void new_context(struct mm_struct *mm, unsigned int cpu) { - unsigned long flags; + u64 asid = mm->context.id; + u64 generation = atomic64_read(&asid_generation); - /* - * Locking needed for multi-threaded applications where the - * same mm->context.id could be set from different CPUs during - * the broadcast. This function is also called via IPI so the - * mm->context.id_lock has to be IRQ-safe. - */ - raw_spin_lock_irqsave(&mm->context.id_lock, flags); - if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) { + if (asid != 0 && is_reserved_asid(asid)) { /* - * Old version of ASID found. Set the new one and - * reset mm_cpumask(mm). + * Our current ASID was active during a rollover, we can + * continue to use it and this was just a false alarm. */ - mm->context.id = asid; + asid = generation | (asid & ~ASID_MASK); + } else { + /* + * Allocate a free ASID. If we can't find one, take a + * note of the currently active ASIDs and mark the TLBs + * as requiring flushes. + */ + asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS); + if (asid == NUM_USER_ASIDS) { + generation = atomic64_add_return(ASID_FIRST_VERSION, + &asid_generation); + flush_context(cpu); + asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS); + } + __set_bit(asid, asid_map); + asid = generation | IDX_TO_ASID(asid); cpumask_clear(mm_cpumask(mm)); } - raw_spin_unlock_irqrestore(&mm->context.id_lock, flags); - /* - * Set the mm_cpumask(mm) bit for the current CPU. - */ - cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); + mm->context.id = asid; } -/* - * Reset the ASID on the current CPU. This function call is broadcast - * from the CPU handling the ASID rollover and holding cpu_asid_lock. - */ -static void reset_context(void *info) +void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) { - unsigned int asid; + unsigned long flags; unsigned int cpu = smp_processor_id(); - struct mm_struct *mm = current->active_mm; - smp_rmb(); - asid = cpu_last_asid + cpu + 1; + if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)) + __check_vmalloc_seq(mm); - flush_context(); - set_mm_context(mm, asid); - - /* set the new ASID */ - cpu_switch_mm(mm->pgd, mm); -} + /* + * Required during context switch to avoid speculative page table + * walking with the wrong TTBR. + */ + cpu_set_reserved_ttbr0(); -#else + if (!((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS) + && atomic64_xchg(&per_cpu(active_asids, cpu), mm->context.id)) + goto switch_mm_fastpath; -static inline void set_mm_context(struct mm_struct *mm, unsigned int asid) -{ - mm->context.id = asid; - cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id())); -} + raw_spin_lock_irqsave(&cpu_asid_lock, flags); + /* Check that our ASID belongs to the current generation. */ + if ((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS) + new_context(mm, cpu); -#endif + atomic64_set(&per_cpu(active_asids, cpu), mm->context.id); + cpumask_set_cpu(cpu, mm_cpumask(mm)); -void __new_context(struct mm_struct *mm) -{ - unsigned int asid; + if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) + local_flush_tlb_all(); + raw_spin_unlock_irqrestore(&cpu_asid_lock, flags); - raw_spin_lock(&cpu_asid_lock); -#ifdef CONFIG_SMP - /* - * Check the ASID again, in case the change was broadcast from - * another CPU before we acquired the lock. - */ - if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) { - cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); - raw_spin_unlock(&cpu_asid_lock); - return; - } -#endif - /* - * At this point, it is guaranteed that the current mm (with - * an old ASID) isn't active on any other CPU since the ASIDs - * are changed simultaneously via IPI. - */ - asid = ++cpu_last_asid; - if (asid == 0) - asid = cpu_last_asid = ASID_FIRST_VERSION; - - /* - * If we've used up all our ASIDs, we need - * to start a new version and flush the TLB. - */ - if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id() + 1; - flush_context(); -#ifdef CONFIG_SMP - smp_wmb(); - smp_call_function(reset_context, NULL, 1); -#endif - cpu_last_asid += NR_CPUS; - } - - set_mm_context(mm, asid); - raw_spin_unlock(&cpu_asid_lock); +switch_mm_fastpath: + cpu_switch_mm(mm->pgd, mm); } diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index ab88ed4f8e08..99db769307ec 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -92,6 +92,9 @@ static int __init init_static_idmap(void) (long long)idmap_start, (long long)idmap_end); identity_mapping_add(idmap_pgd, idmap_start, idmap_end); + /* Flush L1 for the hardware to see this page table content */ + flush_cache_louis(); + return 0; } early_initcall(init_static_idmap); @@ -103,12 +106,15 @@ early_initcall(init_static_idmap); */ void setup_mm_for_reboot(void) { - /* Clean and invalidate L1. */ - flush_cache_all(); - /* Switch to the identity mapping. */ cpu_switch_mm(idmap_pgd, &init_mm); - /* Flush the TLB. */ +#ifdef CONFIG_CPU_HAS_ASID + /* + * We don't have a clean ASID for the identity mapping, which + * may clash with virtual addresses of the previous page tables + * and therefore potentially in the TLB. + */ local_flush_tlb_all(); +#endif } diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 5dcc2fd46c46..88fd86cf3d9a 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -47,18 +47,18 @@ int ioremap_page(unsigned long virt, unsigned long phys, } EXPORT_SYMBOL(ioremap_page); -void __check_kvm_seq(struct mm_struct *mm) +void __check_vmalloc_seq(struct mm_struct *mm) { unsigned int seq; do { - seq = init_mm.context.kvm_seq; + seq = init_mm.context.vmalloc_seq; memcpy(pgd_offset(mm, VMALLOC_START), pgd_offset_k(VMALLOC_START), sizeof(pgd_t) * (pgd_index(VMALLOC_END) - pgd_index(VMALLOC_START))); - mm->context.kvm_seq = seq; - } while (seq != init_mm.context.kvm_seq); + mm->context.vmalloc_seq = seq; + } while (seq != init_mm.context.vmalloc_seq); } #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) @@ -89,13 +89,13 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) if (!pmd_none(pmd)) { /* * Clear the PMD from the page table, and - * increment the kvm sequence so others + * increment the vmalloc sequence so others * notice this change. * * Note: this is still racy on SMP machines. */ pmd_clear(pmdp); - init_mm.context.kvm_seq++; + init_mm.context.vmalloc_seq++; /* * Free the page table, if there was one. @@ -112,8 +112,8 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) * Ensure that the active_mm is up to date - we want to * catch any use-after-iounmap cases. */ - if (current->active_mm->context.kvm_seq != init_mm.context.kvm_seq) - __check_kvm_seq(current->active_mm); + if (current->active_mm->context.vmalloc_seq != init_mm.context.vmalloc_seq) + __check_vmalloc_seq(current->active_mm); flush_tlb_kernel_range(virt, end); } diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index ce8cb1970d7a..10062ceadd1c 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -11,18 +11,6 @@ #include <linux/random.h> #include <asm/cachetype.h> -static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, - unsigned long pgoff) -{ - unsigned long base = addr & ~(SHMLBA-1); - unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1); - - if (base + off <= addr) - return base + off; - - return base - off; -} - #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1))) @@ -69,9 +57,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; - unsigned long start_addr; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; /* * We only need to do colour alignment if either the I or D @@ -104,46 +92,14 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } - if (len > mm->cached_hole_size) { - start_addr = addr = mm->free_area_cache; - } else { - start_addr = addr = mm->mmap_base; - mm->cached_hole_size = 0; - } -full_search: - if (do_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (TASK_SIZE - len < addr) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (!vma || addr + len <= vma->vm_start) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - addr = vma->vm_end; - if (do_align) - addr = COLOUR_ALIGN(addr, pgoff); - } + info.flags = 0; + info.length = len; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); } unsigned long @@ -156,6 +112,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, unsigned long addr = addr0; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; /* * We only need to do colour alignment if either the I or D @@ -187,70 +144,27 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } - - /* either no address requested or can't fit in requested address hole */ - addr = mm->free_area_cache; - if (do_align) { - unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff); - addr = base + len; - } - - /* make sure it can fit in the remaining address space */ - if (addr > len) { - vma = find_vma(mm, addr-len); - if (!vma || addr <= vma->vm_start) - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); - } - - if (mm->mmap_base < len) - goto bottomup; - - addr = mm->mmap_base - len; - if (do_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - - do { - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (!vma || addr+len <= vma->vm_start) - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = vma->vm_start - len; - if (do_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - } while (len < vma->vm_start); - -bottomup: /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + addr = vm_unmapped_area(&info); + } return addr; } @@ -279,7 +193,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) * You really shouldn't be using read() or write() on /dev/mem. This * might go away in the future. */ -int valid_phys_addr_range(unsigned long addr, size_t size) +int valid_phys_addr_range(phys_addr_t addr, size_t size) { if (addr < PHYS_OFFSET) return 0; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 941dfb9e9a78..9f0610243bd6 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -488,7 +488,7 @@ static void __init build_mem_type_table(void) #endif for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); + pteval_t v = pgprot_val(protection_map[i]); protection_map[i] = __pgprot(v | user_pgprot); } @@ -876,6 +876,22 @@ static void __init pci_reserve_io(void) #define pci_reserve_io() do { } while (0) #endif +#ifdef CONFIG_DEBUG_LL +void __init debug_ll_io_init(void) +{ + struct map_desc map; + + debug_ll_addr(&map.pfn, &map.virtual); + if (!map.pfn || !map.virtual) + return; + map.pfn = __phys_to_pfn(map.pfn); + map.virtual &= PAGE_MASK; + map.length = PAGE_SIZE; + map.type = MT_DEVICE; + create_mapping(&map); +} +#endif + static void * __initdata vmalloc_min = (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index b29a2265af01..eb6aa73bc8b7 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -167,6 +167,10 @@ tst r1, #L_PTE_YOUNG tstne r1, #L_PTE_PRESENT moveq r3, #0 +#ifndef CONFIG_CPU_USE_DOMAINS + tstne r1, #L_PTE_NONE + movne r3, #0 +#endif str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 86b8b480634f..09c5233f4dfc 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area) mov pc, lr /* - * cpu_arm926_switch_mm(pgd_phys, tsk) + * cpu_v6_switch_mm(pgd_phys, tsk) * * Set the translation table base pointer to be pgd_phys * diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index fd045e706390..6d98c13ab827 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -100,7 +100,11 @@ ENTRY(cpu_v7_set_pte_ext) orrne r3, r3, #PTE_EXT_XN tst r1, #L_PTE_YOUNG - tstne r1, #L_PTE_PRESENT + tstne r1, #L_PTE_VALID +#ifndef CONFIG_CPU_USE_DOMAINS + eorne r1, r1, #L_PTE_NONE + tstne r1, #L_PTE_NONE +#endif moveq r3, #0 ARM( str r3, [r0, #2048]! ) @@ -161,11 +165,11 @@ ENDPROC(cpu_v7_set_pte_ext) * TFR EV X F I D LR S * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 1 0 110 0011 1100 .111 1101 < we want + * 01 0 110 0011 1100 .111 1101 < we want */ .align 2 .type v7_crval, #object v7_crval: - crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c + crval clear=0x2120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c .previous diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 8de0f1dd1549..7b56386f9496 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -65,8 +65,11 @@ ENDPROC(cpu_v7_switch_mm) */ ENTRY(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU - tst r2, #L_PTE_PRESENT + tst r2, #L_PTE_VALID beq 1f + tst r3, #1 << (57 - 32) @ L_PTE_NONE + bicne r2, #L_PTE_VALID + bne 1f tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 846d279f3176..42cc833aa02f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -57,7 +57,7 @@ ENTRY(cpu_v7_reset) THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb - mov pc, r0 + bx r0 ENDPROC(cpu_v7_reset) .popsection diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index c641fb685017..b6f305e3b908 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -42,7 +42,7 @@ #define r_skb_hl ARM_R8 #define SCRATCH_SP_OFFSET 0 -#define SCRATCH_OFF(k) (SCRATCH_SP_OFFSET + (k)) +#define SCRATCH_OFF(k) (SCRATCH_SP_OFFSET + 4 * (k)) #define SEEN_MEM ((1 << BPF_MEMWORDS) - 1) #define SEEN_MEM_WORD(k) (1 << (k)) @@ -845,7 +845,7 @@ void bpf_jit_compile(struct sk_filter *fp) ctx.skf = fp; ctx.ret0_fp_idx = -1; - ctx.offsets = kzalloc(GFP_KERNEL, 4 * (ctx.skf->len + 1)); + ctx.offsets = kzalloc(4 * (ctx.skf->len + 1), GFP_KERNEL); if (ctx.offsets == NULL) return; @@ -864,7 +864,7 @@ void bpf_jit_compile(struct sk_filter *fp) ctx.idx += ctx.imm_count; if (ctx.imm_count) { - ctx.imms = kzalloc(GFP_KERNEL, 4 * ctx.imm_count); + ctx.imms = kzalloc(4 * ctx.imm_count, GFP_KERNEL); if (ctx.imms == NULL) goto out; } diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig deleted file mode 100644 index 88e1e2e7a20d..000000000000 --- a/arch/arm/plat-mxc/Kconfig +++ /dev/null @@ -1,89 +0,0 @@ -if ARCH_MXC - -source "arch/arm/plat-mxc/devices/Kconfig" - -menu "Freescale MXC Implementations" - -choice - prompt "Freescale CPU family:" - default ARCH_IMX_V6_V7 - -config ARCH_IMX_V4_V5 - bool "i.MX1, i.MX21, i.MX25, i.MX27" - select ARM_PATCH_PHYS_VIRT - select AUTO_ZRELADDR if !ZBOOT_ROM - help - This enables support for systems based on the Freescale i.MX ARMv4 - and ARMv5 SoCs - -config ARCH_IMX_V6_V7 - bool "i.MX3, i.MX5, i.MX6" - select ARM_PATCH_PHYS_VIRT - select AUTO_ZRELADDR if !ZBOOT_ROM - select MIGHT_HAVE_CACHE_L2X0 - help - This enables support for systems based on the Freescale i.MX3, i.MX5 - and i.MX6 family. - -endchoice - -source "arch/arm/mach-imx/Kconfig" - -endmenu - -config MXC_IRQ_PRIOR - bool "Use IRQ priority" - help - Select this if you want to use prioritized IRQ handling. - This feature prevents higher priority ISR to be interrupted - by lower priority IRQ even IRQF_DISABLED flag is not set. - This may be useful in embedded applications, where are strong - requirements for timing. - Say N here, unless you have a specialized requirement. - -config MXC_TZIC - bool - -config MXC_AVIC - bool - -config MXC_DEBUG_BOARD - bool "Enable MXC debug board(for 3-stack)" - help - The debug board is an integral part of the MXC 3-stack(PDK) - platforms, it can be attached or removed from the peripheral - board. On debug board, several debug devices(ethernet, UART, - buttons, LEDs and JTAG) are implemented. Between the MCU and - these devices, a CPLD is added as a bridge which performs - data/address de-multiplexing and decode, signal level shift, - interrupt control and various board functions. - -config HAVE_EPIT - bool - -config MXC_USE_EPIT - bool "Use EPIT instead of GPT" - depends on HAVE_EPIT - help - Use EPIT as the system timer on systems that have it. Normally you - don't have a reason to do so as the EPIT has the same features and - uses the same clocks as the GPT. Anyway, on some systems the GPT - may be in use for other purposes. - -config MXC_ULPI - bool - -config ARCH_HAS_RNGA - bool - -config IMX_HAVE_IOMUX_V1 - bool - -config ARCH_MXC_IOMUX_V3 - bool - -config IRAM_ALLOC - bool - select GENERIC_ALLOCATOR - -endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile deleted file mode 100644 index 149237e24850..000000000000 --- a/arch/arm/plat-mxc/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Common support -obj-y := time.o devices.o cpu.o system.o irq-common.o - -obj-$(CONFIG_MXC_TZIC) += tzic.o -obj-$(CONFIG_MXC_AVIC) += avic.o - -obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o -obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o -obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o -obj-$(CONFIG_MXC_ULPI) += ulpi.o -obj-$(CONFIG_MXC_USE_EPIT) += epit.o -obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o -ifdef CONFIG_SND_IMX_SOC -obj-y += ssi-fiq.o -obj-y += ssi-fiq-ksym.o -endif - -obj-y += devices/ diff --git a/arch/arm/plat-mxc/devices/platform-mx2-emma.c b/arch/arm/plat-mxc/devices/platform-mx2-emma.c new file mode 100644 index 000000000000..508404ddd4ea --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mx2-emma.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mx2_emmaprp_data_entry_single(soc) \ + { \ + .iobase = soc ## _EMMAPRP_BASE_ADDR, \ + .iosize = SZ_32, \ + .irq = soc ## _INT_EMMAPRP, \ + } + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst = + imx_mx2_emmaprp_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +struct platform_device *__init imx_add_mx2_emmaprp( + const struct imx_mx2_emma_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device_dmamask("m2m-emmaprp", 0, + res, 2, NULL, 0, DMA_BIT_MASK(32)); +} diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h deleted file mode 100644 index 539e559d18b2..000000000000 --- a/arch/arm/plat-mxc/include/mach/ipu.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Copyright (C) 2008 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IPU_H_ -#define _IPU_H_ - -#include <linux/types.h> -#include <linux/dmaengine.h> - -/* IPU DMA Controller channel definitions. */ -enum ipu_channel { - IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ - IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ - IDMAC_ADC_0 = 1, - IDMAC_IC_2 = 2, - IDMAC_ADC_1 = 2, - IDMAC_IC_3 = 3, - IDMAC_IC_4 = 4, - IDMAC_IC_5 = 5, - IDMAC_IC_6 = 6, - IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ - IDMAC_IC_8 = 8, - IDMAC_IC_9 = 9, - IDMAC_IC_10 = 10, - IDMAC_IC_11 = 11, - IDMAC_IC_12 = 12, - IDMAC_IC_13 = 13, - IDMAC_SDC_0 = 14, /* Background synchronous display data */ - IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ - IDMAC_SDC_2 = 16, - IDMAC_SDC_3 = 17, - IDMAC_ADC_2 = 18, - IDMAC_ADC_3 = 19, - IDMAC_ADC_4 = 20, - IDMAC_ADC_5 = 21, - IDMAC_ADC_6 = 22, - IDMAC_ADC_7 = 23, - IDMAC_PF_0 = 24, - IDMAC_PF_1 = 25, - IDMAC_PF_2 = 26, - IDMAC_PF_3 = 27, - IDMAC_PF_4 = 28, - IDMAC_PF_5 = 29, - IDMAC_PF_6 = 30, - IDMAC_PF_7 = 31, -}; - -/* Order significant! */ -enum ipu_channel_status { - IPU_CHANNEL_FREE, - IPU_CHANNEL_INITIALIZED, - IPU_CHANNEL_READY, - IPU_CHANNEL_ENABLED, -}; - -#define IPU_CHANNELS_NUM 32 - -enum pixel_fmt { - /* 1 byte */ - IPU_PIX_FMT_GENERIC, - IPU_PIX_FMT_RGB332, - IPU_PIX_FMT_YUV420P, - IPU_PIX_FMT_YUV422P, - IPU_PIX_FMT_YUV420P2, - IPU_PIX_FMT_YVU422P, - /* 2 bytes */ - IPU_PIX_FMT_RGB565, - IPU_PIX_FMT_RGB666, - IPU_PIX_FMT_BGR666, - IPU_PIX_FMT_YUYV, - IPU_PIX_FMT_UYVY, - /* 3 bytes */ - IPU_PIX_FMT_RGB24, - IPU_PIX_FMT_BGR24, - /* 4 bytes */ - IPU_PIX_FMT_GENERIC_32, - IPU_PIX_FMT_RGB32, - IPU_PIX_FMT_BGR32, - IPU_PIX_FMT_ABGR32, - IPU_PIX_FMT_BGRA32, - IPU_PIX_FMT_RGBA32, -}; - -enum ipu_color_space { - IPU_COLORSPACE_RGB, - IPU_COLORSPACE_YCBCR, - IPU_COLORSPACE_YUV -}; - -/* - * Enumeration of IPU rotation modes - */ -enum ipu_rotate_mode { - /* Note the enum values correspond to BAM value */ - IPU_ROTATE_NONE = 0, - IPU_ROTATE_VERT_FLIP = 1, - IPU_ROTATE_HORIZ_FLIP = 2, - IPU_ROTATE_180 = 3, - IPU_ROTATE_90_RIGHT = 4, - IPU_ROTATE_90_RIGHT_VFLIP = 5, - IPU_ROTATE_90_RIGHT_HFLIP = 6, - IPU_ROTATE_90_LEFT = 7, -}; - -/* - * Enumeration of DI ports for ADC. - */ -enum display_port { - DISP0, - DISP1, - DISP2, - DISP3 -}; - -struct idmac_video_param { - unsigned short in_width; - unsigned short in_height; - uint32_t in_pixel_fmt; - unsigned short out_width; - unsigned short out_height; - uint32_t out_pixel_fmt; - unsigned short out_stride; - bool graphics_combine_en; - bool global_alpha_en; - bool key_color_en; - enum display_port disp; - unsigned short out_left; - unsigned short out_top; -}; - -/* - * Union of initialization parameters for a logical channel. So far only video - * parameters are used. - */ -union ipu_channel_param { - struct idmac_video_param video; -}; - -struct idmac_tx_desc { - struct dma_async_tx_descriptor txd; - struct scatterlist *sg; /* scatterlist for this */ - unsigned int sg_len; /* tx-descriptor. */ - struct list_head list; -}; - -struct idmac_channel { - struct dma_chan dma_chan; - dma_cookie_t completed; /* last completed cookie */ - union ipu_channel_param params; - enum ipu_channel link; /* input channel, linked to the output */ - enum ipu_channel_status status; - void *client; /* Only one client per channel */ - unsigned int n_tx_desc; - struct idmac_tx_desc *desc; /* allocated tx-descriptors */ - struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ - struct list_head free_list; /* free tx-descriptors */ - struct list_head queue; /* queued tx-descriptors */ - spinlock_t lock; /* protects sg[0,1], queue */ - struct mutex chan_mutex; /* protects status, cookie, free_list */ - bool sec_chan_en; - int active_buffer; - unsigned int eof_irq; - char eof_name[16]; /* EOF IRQ name for request_irq() */ -}; - -#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) -#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) - -#endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h deleted file mode 100644 index d73f5e8ea9cb..000000000000 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IRQS_H__ -#define __ASM_ARCH_MXC_IRQS_H__ - -extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); - -/* all normal IRQs can be FIQs */ -#define FIQ_START 0 -/* switch between IRQ and FIQ */ -extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); - -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h deleted file mode 100644 index 10343d1f87e1..000000000000 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_TIMEX_H__ -#define __ASM_ARCH_MXC_TIMEX_H__ - -/* Bogus value */ -#define CLOCK_TICK_RATE 12345678 - -#endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h deleted file mode 100644 index 477971b00930..000000000000 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/arm/plat-mxc/include/mach/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ -#define __ASM_ARCH_MXC_UNCOMPRESS_H__ - -#define __MXC_BOOT_UNCOMPRESS - -#include <asm/mach-types.h> - -unsigned long uart_base; - -#define UART(x) (*(volatile unsigned long *)(uart_base + (x))) - -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ - -static void putc(int ch) -{ - if (!uart_base) - return; - if (!(UART(UCR1) & UCR1_UARTEN)) - return; - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = ch; -} - -static inline void flush(void) -{ -} - -#define MX1_UART1_BASE_ADDR 0x00206000 -#define MX25_UART1_BASE_ADDR 0x43f90000 -#define MX2X_UART1_BASE_ADDR 0x1000a000 -#define MX3X_UART1_BASE_ADDR 0x43F90000 -#define MX3X_UART2_BASE_ADDR 0x43F94000 -#define MX3X_UART5_BASE_ADDR 0x43FB4000 -#define MX51_UART1_BASE_ADDR 0x73fbc000 -#define MX50_UART1_BASE_ADDR 0x53fbc000 -#define MX53_UART1_BASE_ADDR 0x53fbc000 - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - switch (arch_id) { - case MACH_TYPE_MX1ADS: - case MACH_TYPE_SCB9328: - uart_base = MX1_UART1_BASE_ADDR; - break; - case MACH_TYPE_MX25_3DS: - uart_base = MX25_UART1_BASE_ADDR; - break; - case MACH_TYPE_IMX27LITE: - case MACH_TYPE_MX27_3DS: - case MACH_TYPE_MX27ADS: - case MACH_TYPE_PCM038: - case MACH_TYPE_MX21ADS: - case MACH_TYPE_PCA100: - case MACH_TYPE_MXT_TD60: - case MACH_TYPE_IMX27IPCAM: - uart_base = MX2X_UART1_BASE_ADDR; - break; - case MACH_TYPE_MX31LITE: - case MACH_TYPE_ARMADILLO5X0: - case MACH_TYPE_MX31MOBOARD: - case MACH_TYPE_QONG: - case MACH_TYPE_MX31_3DS: - case MACH_TYPE_PCM037: - case MACH_TYPE_MX31ADS: - case MACH_TYPE_MX35_3DS: - case MACH_TYPE_PCM043: - case MACH_TYPE_LILLY1131: - case MACH_TYPE_VPR200: - case MACH_TYPE_EUKREA_CPUIMX35SD: - uart_base = MX3X_UART1_BASE_ADDR; - break; - case MACH_TYPE_MAGX_ZN5: - uart_base = MX3X_UART2_BASE_ADDR; - break; - case MACH_TYPE_BUG: - uart_base = MX3X_UART5_BASE_ADDR; - break; - case MACH_TYPE_MX51_BABBAGE: - case MACH_TYPE_EUKREA_CPUIMX51SD: - case MACH_TYPE_MX51_3DS: - uart_base = MX51_UART1_BASE_ADDR; - break; - case MACH_TYPE_MX50_RDP: - uart_base = MX50_UART1_BASE_ADDR; - break; - case MACH_TYPE_MX53_EVK: - case MACH_TYPE_MX53_LOCO: - case MACH_TYPE_MX53_SMD: - case MACH_TYPE_MX53_ARD: - uart_base = MX53_UART1_BASE_ADDR; - break; - default: - break; - } -} - -#define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */ diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h deleted file mode 100644 index c08a54d9d889..000000000000 --- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); -extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); -#ifdef CONFIG_PINCTRL_NOMADIK -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -#else -static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - return -ENODEV; -} -#endif -extern int nmk_gpio_get_mode(int gpio); - -extern void nmk_gpio_wakeups_suspend(void); -extern void nmk_gpio_wakeups_resume(void); - -extern void nmk_gpio_clocks_enable(void); -extern void nmk_gpio_clocks_disable(void); - -extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h deleted file mode 100644 index 3b8ec60af351..000000000000 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __PLAT_PINCFG_H -#define __PLAT_PINCFG_H - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); -extern int nmk_config_pins(pin_cfg_t *cfgs, int num); -extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); - -#endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 82fcb206b5b2..665870dce3c8 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -154,6 +154,12 @@ config OMAP_32K_TIMER intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5. + On OMAP2PLUS this value is only used for CONFIG_HZ and + CLOCK_TICK_RATE compile time calculation. + The actual timer selection is done in the board file + through the (DT_)MACHINE_START structure. + + config OMAP3_L2_AUX_SECURE_SAVE_RESTORE bool "OMAP3 HS/EMU save and restore for L2 AUX control register" depends on ARCH_OMAP3 && PM diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index dacaee009a4e..8d885848600a 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,13 +3,12 @@ # # Common support -obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o +obj-y := sram.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := # omap_device support (OMAP2+ only at the moment) -obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o @@ -20,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c deleted file mode 100644 index 9d7ac20ef8f9..000000000000 --- a/arch/arm/plat-omap/clock.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * linux/arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2008 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/export.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/cpufreq.h> -#include <linux/io.h> - -#include <plat/clock.h> - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); - -static struct clk_functions *arch_clock; - -/* - * Standard clock functions defined in include/linux/clk.h - */ - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (!arch_clock || !arch_clock->clk_enable) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - if (!arch_clock || !arch_clock->clk_disable) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - pr_err("Trying disable clock %s with 0 usecount\n", - clk->name); - WARN_ON(1); - goto out; - } - - arch_clock->clk_disable(clk); - -out: - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->rate; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * Optional clock functions defined in include/linux/clk.h - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - if (!arch_clock || !arch_clock->clk_round_rate) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_round_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_rate) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_set_rate(clk, rate); - if (ret == 0) - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_parent) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - ret = arch_clock->clk_set_parent(clk, parent); - if (ret == 0) - propagate_rate(clk); - } else - ret = -EBUSY; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -/* - * OMAP specific clock functions shared between omap1 and omap2 - */ - -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - -/* Used for clocks that always have same value as the parent clock */ -unsigned long followparent_recalc(struct clk *clk) -{ - return clk->parent->rate; -} - -/* - * Used for clocks that have the same value as the parent clock, - * divided by some factor - */ -unsigned long omap_fixed_divisor_recalc(struct clk *clk) -{ - WARN_ON(!clk->fixed_div); - - return clk->parent->rate / clk->fixed_div; -} - -void clk_reparent(struct clk *child, struct clk *parent) -{ - list_del_init(&child->sibling); - if (parent) - list_add(&child->sibling, &parent->children); - child->parent = parent; - - /* now do the debugfs renaming to reattach the child - to the proper parent */ -} - -/* Propagate rate to children */ -void propagate_rate(struct clk *tclk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &tclk->children, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -static LIST_HEAD(root_clks); - -/** - * recalculate_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - * Called at init. - */ -void recalculate_root_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &root_clks, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -/** - * clk_preinit - initialize any fields in the struct clk before clk init - * @clk: struct clk * to initialize - * - * Initialize any struct clk fields needed before normal clk initialization - * can run. No return value. - */ -void clk_preinit(struct clk *clk) -{ - INIT_LIST_HEAD(&clk->children); -} - -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - /* - * trap out already registered clocks - */ - if (clk->node.next || clk->node.prev) - return 0; - - mutex_lock(&clocks_mutex); - if (clk->parent) - list_add(&clk->sibling, &clk->parent->children); - else - list_add(&clk->sibling, &root_clks); - - list_add(&clk->node, &clocks); - if (clk->init) - clk->init(clk); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->sibling); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -void clk_enable_init_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clocks, node) { - if (clkp->flags & ENABLE_ON_INIT) - clk_enable(clkp); - } -} - -int omap_clk_enable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->allow_idle) - c->ops->allow_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -int omap_clk_disable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->deny_idle) - c->ops->deny_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -/* - * Low level helpers - */ -static int clkll_enable_null(struct clk *clk) -{ - return 0; -} - -static void clkll_disable_null(struct clk *clk) -{ -} - -const struct clkops clkops_null = { - .enable = clkll_enable_null, - .disable = clkll_disable_null, -}; - -/* - * Dummy clock - * - * Used for clock aliases that are needed on some OMAPs, but not others - */ -struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_null, -}; - -/* - * - */ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -static int __init clk_disable_unused(void) -{ - struct clk *ck; - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_disable_unused) - return 0; - - pr_info("clock: disabling unused clocks to save power\n"); - - spin_lock_irqsave(&clockfw_lock, flags); - list_for_each_entry(ck, &clocks, node) { - if (ck->ops == &clkops_null) - continue; - - if (ck->usecount > 0 || !ck->enable_reg) - continue; - - arch_clock->clk_disable_unused(ck); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -late_initcall(clk_disable_unused); -late_initcall(omap_clk_enable_autoidle_all); -#endif - -int __init clk_init(struct clk_functions * custom_clocks) -{ - if (!custom_clocks) { - pr_err("No custom clock functions registered\n"); - BUG(); - } - - arch_clock = custom_clocks; - - return 0; -} - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* - * debugfs support to trace clock tree hierarchy and attributes - */ - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static struct dentry *clk_debugfs_root; - -static int clk_dbg_show_summary(struct seq_file *s, void *unused) -{ - struct clk *c; - struct clk *pa; - - mutex_lock(&clocks_mutex); - seq_printf(s, "%-30s %-30s %-10s %s\n", - "clock-name", "parent-name", "rate", "use-count"); - - list_for_each_entry(c, &clocks, node) { - pa = c->parent; - seq_printf(s, "%-30s %-30s %-10lu %d\n", - c->name, pa ? pa->name : "none", c->rate, c->usecount); - } - mutex_unlock(&clocks_mutex); - - return 0; -} - -static int clk_dbg_open(struct inode *inode, struct file *file) -{ - return single_open(file, clk_dbg_show_summary, inode->i_private); -} - -static const struct file_operations debug_clock_fops = { - .open = clk_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->parent; - - d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - - d = debugfs_create_file("summary", S_IRUGO, - d, NULL, &debug_clock_fops); - if (!d) - return -ENOMEM; - - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c deleted file mode 100644 index 111315a69354..000000000000 --- a/arch/arm/plat-omap/common.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/arm/plat-omap/common.c - * - * Code common to all OMAP machines. - * The file is created by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/dma-mapping.h> - -#include <plat/common.h> -#include <plat/vram.h> -#include <linux/platform_data/dsp-omap.h> -#include <plat/dma.h> - -#include <plat/omap-secure.h> - -void __init omap_reserve(void) -{ - omap_vram_reserve_sdram_memblock(); - omap_dsp_reserve_sdram_memblock(); - omap_secure_ram_reserve_memblock(); - omap_barrier_reserve_memblock(); -} - -void __init omap_init_consistent_dma_size(void) -{ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); -#endif -} - -/* - * Stub function for OMAP2 so that common files - * continue to build when custom builds are used - */ -int __weak omap_secure_ram_reserve_memblock(void) -{ - return 0; -} diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 87ba8dd0d791..f3771cdb9838 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,9 +22,6 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <plat/common.h> -#include <plat/clock.h> - /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 5a4678edd65a..a609e2161817 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -15,8 +15,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <mach/hardware.h> -#include "../mach-omap2/debug-devices.h" +#include <plat/debug-devices.h> /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index ea29bbe8e5cf..aa7ebc6bcd65 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -17,16 +17,33 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <plat/fpga.h> - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the * debug board (all green), accessed through FPGA registers. */ +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + static struct h2p2_dbg_fpga __iomem *fpga; static u16 fpga_led_state; @@ -94,7 +111,7 @@ static int fpga_probe(struct platform_device *pdev) if (!iomem) return -ENODEV; - fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE); + fpga = ioremap(iomem->start, resource_size(iomem)); __raw_writew(0xff, &fpga->leds); for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) { diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c76ed8bff838..c288b76f8e6c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,9 +36,7 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <plat/cpu.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA @@ -175,12 +173,13 @@ static inline void set_gdma_dev(int req, int dev) #define omap_writel(val, reg) do {} while (0) #endif +#ifdef CONFIG_ARCH_OMAP1 void omap_set_dma_priority(int lch, int dst_port, int priority) { unsigned long reg; u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { switch (dst_port) { case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ reg = OMAP_TC_OCPT1_PRIOR; @@ -203,18 +202,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) l |= (priority & 0xf) << 8; omap_writel(l, reg); } +} +#endif - if (cpu_class_is_omap2()) { - u32 ccr; +#ifdef CONFIG_ARCH_OMAP2PLUS +void omap_set_dma_priority(int lch, int dst_port, int priority) +{ + u32 ccr; - ccr = p->dma_read(CCR, lch); - if (priority) - ccr |= (1 << 6); - else - ccr &= ~(1 << 6); - p->dma_write(ccr, CCR, lch); - } + ccr = p->dma_read(CCR, lch); + if (priority) + ccr |= (1 << 6); + else + ccr &= ~(1 << 6); + p->dma_write(ccr, CCR, lch); } +#endif EXPORT_SYMBOL(omap_set_dma_priority); void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, @@ -228,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, l |= data_type; p->dma_write(l, CSDP, lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 ccr; ccr = p->dma_read(CCR, lch); @@ -244,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, p->dma_write(ccr, CCR2, lch); } - if (cpu_class_is_omap2() && dma_trigger) { + if (dma_omap2plus() && dma_trigger) { u32 val; val = p->dma_read(CCR, lch); @@ -284,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CCR2, lch); @@ -314,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) p->dma_write(w, LCH_CTRL, lch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 val; val = p->dma_read(CCR, lch); @@ -342,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode); void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 csdp; csdp = p->dma_read(CSDP, lch); @@ -355,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode); void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) { - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { + if (dma_omap1() && !dma_omap15xx()) { u32 l; l = p->dma_read(LCH_CTRL, lch); @@ -373,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CSDP, lch); @@ -415,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params); void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CSEI, lch); @@ -447,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x2; break; } @@ -463,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -487,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { l = p->dma_read(CSDP, lch); l &= ~(0x1f << 9); l |= dest_port << 9; @@ -508,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params); void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CDEI, lch); @@ -540,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -573,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -587,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch) /* disable channel interrupts */ p->dma_write(0, CICR, lch); /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -611,7 +614,7 @@ static inline void enable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); - if (cpu_class_is_omap1()) + if (dma_omap1()) l &= ~(1 << 14); /* Set the ENABLE_LNK bits */ @@ -619,7 +622,7 @@ static inline void enable_lnk(int lch) l = dma_chan[lch].next_lch | (1 << 15); #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) + if (dma_omap2plus()) if (dma_chan[lch].next_linked_ch != -1) l = dma_chan[lch].next_linked_ch | (1 << 15); #endif @@ -636,12 +639,12 @@ static inline void disable_lnk(int lch) /* Disable interrupts */ omap_disable_channel_irq(lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* Set the STOP_LNK bit */ l |= 1 << 14; } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -655,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -673,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -712,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (p->clear_lch_regs) p->clear_lch_regs(free_ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -723,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { chan->chain_id = -1; chan->next_linked_ch = -1; } @@ -731,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - if (cpu_class_is_omap1()) + if (dma_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_class_is_omap2()) + else if (dma_omap2plus()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; - if (cpu_is_omap16xx()) { + if (dma_omap16xx()) { /* If the sync device is set, configure it dynamically. */ if (dev_id != 0) { set_gdma_dev(free_ch + 1, dev_id); @@ -748,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ p->dma_write(dev_id | (1 << 10), CCR, free_ch); - } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { + } else if (dma_omap1()) { p->dma_write(dev_id, CCR, free_ch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { omap_enable_channel_irq(free_ch); omap2_enable_irq_lch(free_ch); } @@ -774,7 +777,7 @@ void omap_free_dma(int lch) } /* Disable interrupt for logical channel */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(lch); /* Disable all DMA interrupts for the channel. */ @@ -784,7 +787,7 @@ void omap_free_dma(int lch) p->dma_write(0, CCR, lch); /* Clear registers */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(lch); spin_lock_irqsave(&dma_chan_lock, flags); @@ -810,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) { u32 reg; - if (!cpu_class_is_omap2()) { + if (dma_omap1()) { printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } @@ -849,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = p->dma_read(CCR, lch); l &= ~((1 << 6) | (1 << 26)); - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -882,7 +885,7 @@ void omap_start_dma(int lch) * The CPC/CDAC register needs to be initialized to zero * before starting dma transfer. */ - if (cpu_is_omap15xx()) + if (dma_omap15xx()) p->dma_write(0, CPC, lch); else p->dma_write(0, CDAC, lch); @@ -1045,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CSAC, lch); @@ -1053,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) offset = p->dma_read(CSAC, lch); - if (!cpu_is_omap15xx()) { + if (!dma_omap15xx()) { /* * CDAC == 0 indicates that the DMA transfer on the channel has * not been started (no data has been transferred so far). @@ -1065,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = p->dma_read(CSSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); return offset; @@ -1084,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CDAC, lch); @@ -1093,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is * read before the DMA controller finished disabling the channel. */ - if (!cpu_is_omap15xx() && offset == 0) { + if (!dma_omap15xx() && offset == 0) { offset = p->dma_read(CDAC, lch); /* * CDAC == 0 indicates that the DMA transfer on the channel has @@ -1104,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = p->dma_read(CDSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); return offset; @@ -1121,7 +1124,7 @@ int omap_dma_running(void) { int lch; - if (cpu_class_is_omap1()) + if (dma_omap1()) if (omap_lcd_dma_running()) return 1; @@ -2024,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) dma_chan = d->chan; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { @@ -2036,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(ch); dma_chan[ch].dev_id = -1; @@ -2045,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) if (ch >= 6 && enable_1510_mode) continue; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* * request_irq() doesn't like dev_id (ie. ch) being * zero, so we have to kludge around this. @@ -2070,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); if (dma_irq < 0) { @@ -2089,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - /* reserve dma channels 0 and 1 in high security devices */ - if (cpu_is_omap34xx() && - (omap_type() != OMAP2_DEVICE_TYPE_GP)) { + /* reserve dma channels 0 and 1 in high security devices on 34xx */ + if (d->dev_caps & HS_CHANNELS_RESERVED) { pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); dma_chan[0].dev_id = 0; dma_chan[1].dev_id = 1; @@ -2118,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) { int dma_irq; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { char irq_name[4]; strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 938b50a33439..89585c293554 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -35,16 +35,18 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/clk.h> #include <linux/module.h> #include <linux/io.h> #include <linux/device.h> #include <linux/err.h> #include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <plat/dmtimer.h> -#include <plat/omap-pm.h> - -#include <mach/hardware.h> static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); @@ -84,10 +86,6 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, static void omap_timer_restore_context(struct omap_dm_timer *timer) { - if (timer->revision == 1) - __raw_writel(timer->context.tistat, timer->sys_stat); - - __raw_writel(timer->context.tisr, timer->irq_stat); omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, timer->context.twer); omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, @@ -103,39 +101,38 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer) timer->context.tclr); } -static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) +static int omap_dm_timer_reset(struct omap_dm_timer *timer) { - int c; + u32 l, timeout = 100000; - if (!timer->sys_stat) - return; + if (timer->revision != 1) + return -EINVAL; - c = 0; - while (!(__raw_readl(timer->sys_stat) & 1)) { - c++; - if (c > 100000) { - printk(KERN_ERR "Timer failed to reset\n"); - return; - } - } -} + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); -static void omap_dm_timer_reset(struct omap_dm_timer *timer) -{ - omap_dm_timer_enable(timer); - if (timer->pdev->id != 1) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); - omap_dm_timer_wait_for_reset(timer); + do { + l = __omap_dm_timer_read(timer, + OMAP_TIMER_V1_SYS_STAT_OFFSET, 0); + } while (!l && timeout--); + + if (!timeout) { + dev_err(&timer->pdev->dev, "Timer failed to reset\n"); + return -ETIMEDOUT; } - __omap_dm_timer_reset(timer, 0, 0); - omap_dm_timer_disable(timer); - timer->posted = 1; + /* Configure timer for smart-idle mode */ + l = __omap_dm_timer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET, 0); + l |= 0x2 << 0x3; + __omap_dm_timer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET, l, 0); + + timer->posted = 0; + + return 0; } -int omap_dm_timer_prepare(struct omap_dm_timer *timer) +static int omap_dm_timer_prepare(struct omap_dm_timer *timer) { - int ret; + int rc; /* * FIXME: OMAP1 devices do not use the clock framework for dmtimers so @@ -150,13 +147,20 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer) } } - if (timer->capability & OMAP_TIMER_NEEDS_RESET) - omap_dm_timer_reset(timer); + omap_dm_timer_enable(timer); - ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + if (timer->capability & OMAP_TIMER_NEEDS_RESET) { + rc = omap_dm_timer_reset(timer); + if (rc) { + omap_dm_timer_disable(timer); + return rc; + } + } - timer->posted = 1; - return ret; + __omap_dm_timer_enable_posted(timer); + omap_dm_timer_disable(timer); + + return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); } static inline u32 omap_dm_timer_reserved_systimer(int id) @@ -212,6 +216,13 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) unsigned long flags; int ret = 0; + /* Requesting timer by ID is not supported when device tree is used */ + if (of_have_populated_dt()) { + pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n", + __func__); + return NULL; + } + spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(t, &omap_timer_list, node) { if (t->pdev->id == id && !t->reserved) { @@ -237,6 +248,58 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) } EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); +/** + * omap_dm_timer_request_by_cap - Request a timer by capability + * @cap: Bit mask of capabilities to match + * + * Find a timer based upon capabilities bit mask. Callers of this function + * should use the definitions found in the plat/dmtimer.h file under the + * comment "timer capabilities used in hwmod database". Returns pointer to + * timer handle on success and a NULL pointer on failure. + */ +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap) +{ + struct omap_dm_timer *timer = NULL, *t; + unsigned long flags; + + if (!cap) + return NULL; + + spin_lock_irqsave(&dm_timer_lock, flags); + list_for_each_entry(t, &omap_timer_list, node) { + if ((!t->reserved) && ((t->capability & cap) == cap)) { + /* + * If timer is not NULL, we have already found one timer + * but it was not an exact match because it had more + * capabilites that what was required. Therefore, + * unreserve the last timer found and see if this one + * is a better match. + */ + if (timer) + timer->reserved = 0; + + timer = t; + timer->reserved = 1; + + /* Exit loop early if we find an exact match */ + if (t->capability == cap) + break; + } + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + if (timer && omap_dm_timer_prepare(timer)) { + timer->reserved = 0; + timer = NULL; + } + + if (!timer) + pr_debug("%s: timer request failed!\n", __func__); + + return timer; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); + int omap_dm_timer_free(struct omap_dm_timer *timer) { if (unlikely(!timer)) @@ -271,7 +334,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer) EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); #if defined(CONFIG_ARCH_OMAP1) - +#include <mach/hardware.h> /** * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR * @inputmask: current value of idlect mask @@ -348,7 +411,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -377,9 +441,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) - timer->ctx_loss_count = - omap_pm_get_dev_context_loss_count(&timer->pdev->dev); + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + } /* * Since the register values are computed and written within @@ -388,7 +454,6 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) */ timer->context.tclr = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - timer->context.tisr = __raw_readl(timer->irq_stat); omap_dm_timer_disable(timer); return 0; } @@ -398,7 +463,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int ret; char *parent_name = NULL; - struct clk *fclk, *parent; + struct clk *parent; struct dmtimer_platform_data *pdata; if (unlikely(!timer)) @@ -414,14 +479,11 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) * use the clock framework to set the parent clock. To be removed * once OMAP1 migrated to using clock framework for dmtimers */ - if (pdata->set_timer_src) + if (pdata && pdata->set_timer_src) return pdata->set_timer_src(timer->pdev, source); - fclk = clk_get(&timer->pdev->dev, "fck"); - if (IS_ERR_OR_NULL(fclk)) { - pr_err("%s: fck not found\n", __func__); + if (!timer->fclk) return -EINVAL; - } switch (source) { case OMAP_TIMER_SRC_SYS_CLK: @@ -440,18 +502,15 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) parent = clk_get(&timer->pdev->dev, parent_name); if (IS_ERR_OR_NULL(parent)) { pr_err("%s: %s not found\n", __func__, parent_name); - ret = -EINVAL; - goto out; + return -EINVAL; } - ret = clk_set_parent(fclk, parent); + ret = clk_set_parent(timer->fclk, parent); if (IS_ERR_VALUE(ret)) pr_err("%s: failed to set %s as parent\n", __func__, parent_name); clk_put(parent); -out: - clk_put(fclk); return ret; } @@ -495,7 +554,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -533,8 +593,8 @@ int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, l |= OMAP_TIMER_CTRL_CE; else l &= ~OMAP_TIMER_CTRL_CE; - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); /* Save the context */ timer->context.tclr = l; @@ -610,6 +670,37 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, } EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); +/** + * omap_dm_timer_set_int_disable - disable timer interrupts + * @timer: pointer to timer handle + * @mask: bit mask of interrupts to be disabled + * + * Disables the specified timer interrupts for a timer. + */ +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask) +{ + u32 l = mask; + + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); + + if (timer->revision == 1) + l = __raw_readl(timer->irq_ena) & ~mask; + + __raw_writel(l, timer->irq_dis); + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask; + omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l); + + /* Save the context */ + timer->context.tier &= ~mask; + timer->context.twer &= ~mask; + omap_dm_timer_disable(timer); + return 0; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable); + unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) { unsigned int l; @@ -631,8 +722,7 @@ int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) return -EINVAL; __omap_dm_timer_write_status(timer, value); - /* Save the context */ - timer->context.tisr = value; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); @@ -695,7 +785,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct dmtimer_platform_data *pdata = pdev->dev.platform_data; - if (!pdata) { + if (!pdata && !dev->of_node) { dev_err(dev, "%s: no platform data.\n", __func__); return -ENODEV; } @@ -724,11 +814,25 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) return -ENOMEM; } - timer->id = pdev->id; + if (dev->of_node) { + if (of_find_property(dev->of_node, "ti,timer-alwon", NULL)) + timer->capability |= OMAP_TIMER_ALWON; + if (of_find_property(dev->of_node, "ti,timer-dsp", NULL)) + timer->capability |= OMAP_TIMER_HAS_DSP_IRQ; + if (of_find_property(dev->of_node, "ti,timer-pwm", NULL)) + timer->capability |= OMAP_TIMER_HAS_PWM; + if (of_find_property(dev->of_node, "ti,timer-secure", NULL)) + timer->capability |= OMAP_TIMER_SECURE; + } else { + timer->id = pdev->id; + timer->errata = pdata->timer_errata; + timer->capability = pdata->timer_capability; + timer->reserved = omap_dm_timer_reserved_systimer(timer->id); + timer->get_context_loss_count = pdata->get_context_loss_count; + } + timer->irq = irq->start; - timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; - timer->capability = pdata->timer_capability; /* Skip pm_runtime_enable for OMAP1 */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { @@ -768,7 +872,8 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(timer, &omap_timer_list, node) - if (timer->pdev->id == pdev->id) { + if (!strcmp(dev_name(&timer->pdev->dev), + dev_name(&pdev->dev))) { list_del(&timer->node); ret = 0; break; @@ -778,11 +883,18 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) return ret; } +static const struct of_device_id omap_timer_match[] = { + { .compatible = "ti,omap2-timer", }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_timer_match); + static struct platform_driver omap_dm_timer_driver = { .probe = omap_dm_timer_probe, .remove = __devexit_p(omap_dm_timer_remove), .driver = { .name = "omap_timer", + .of_match_table = of_match_ptr(omap_timer_match), }, }; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index bcbb9d5dc293..3a77b30f53d4 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,9 +30,69 @@ #include <linux/io.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach/map.h> +#include <plat/cpu.h> + +#ifdef CONFIG_OMAP2_VRFB + +/* + * The first memory resource is the register region for VRFB, + * the rest are VRFB virtual memory areas for each VRFB context. + */ + +static const struct resource omap2_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), +}; + +static const struct resource omap3_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), + DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"), + DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"), + DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"), + DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"), + DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"), + DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"), + DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"), + DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"), +}; + +static int __init omap_init_vrfb(void) +{ + struct platform_device *pdev; + const struct resource *res; + unsigned int num_res; + + if (cpu_is_omap24xx()) { + res = omap2_vrfb_resources; + num_res = ARRAY_SIZE(omap2_vrfb_resources); + } else if (cpu_is_omap34xx()) { + res = omap3_vrfb_resources; + num_res = ARRAY_SIZE(omap3_vrfb_resources); + } else { + return 0; + } + + pdev = platform_device_register_resndata(NULL, "omapvrfb", -1, + res, num_res, NULL, 0); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + else + return 0; +} + +arch_initcall(omap_init_vrfb); +#endif + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 6013831a043e..f9df624d108c 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -31,176 +31,13 @@ #include <linux/err.h> #include <linux/clk.h> -#include <mach/irqs.h> #include <plat/i2c.h> -#include <plat/omap-pm.h> -#include <plat/omap_device.h> -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP1_INT_I2C (32 + 4) - -static const char name[] = "omap_i2c"; - -#define I2C_RESOURCE_BUILDER(base, irq) \ - { \ - .start = (base), \ - .end = (base) + OMAP_I2C_SIZE, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = (irq), \ - .flags = IORESOURCE_IRQ, \ - }, - -static struct resource i2c_resources[][2] = { - { I2C_RESOURCE_BUILDER(0, 0) }, -}; - -#define I2C_DEV_BUILDER(bus_id, res, data) \ - { \ - .id = (bus_id), \ - .name = name, \ - .num_resources = ARRAY_SIZE(res), \ - .resource = (res), \ - .dev = { \ - .platform_data = (data), \ - }, \ - } - -#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; -static struct platform_device omap_i2c_devices[] = { - I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]), -}; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static int __init omap_i2c_nr_ports(void) -{ - int ports = 0; - - if (cpu_class_is_omap1()) - ports = 1; - else if (cpu_is_omap24xx()) - ports = 2; - else if (cpu_is_omap34xx()) - ports = 3; - else if (cpu_is_omap44xx()) - ports = 4; - - return ports; -} - -static inline int omap1_i2c_add_bus(int bus_id) -{ - struct platform_device *pdev; - struct omap_i2c_bus_platform_data *pdata; - struct resource *res; - - omap1_i2c_mux_pins(bus_id); - - pdev = &omap_i2c_devices[bus_id - 1]; - res = pdev->resource; - res[0].start = OMAP1_I2C_BASE; - res[0].end = res[0].start + OMAP_I2C_SIZE; - res[1].start = OMAP1_INT_I2C; - pdata = &i2c_pdata[bus_id - 1]; - - /* all OMAP1 have IP version 1 register set */ - pdata->rev = OMAP_I2C_IP_VERSION_1; - - /* all OMAP1 I2C are implemented like this */ - pdata->flags = OMAP_I2C_FLAG_NO_FIFO | - OMAP_I2C_FLAG_SIMPLE_CLOCK | - OMAP_I2C_FLAG_16BIT_DATA_REG | - OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; - - /* how the cpu bus is wired up differs for 7xx only */ - - if (cpu_is_omap7xx()) - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; - else - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; - - return platform_device_register(pdev); -} - - -#ifdef CONFIG_ARCH_OMAP2PLUS -/* - * XXX This function is a temporary compatibility wrapper - only - * needed until the I2C driver can be converted to call - * omap_pm_set_max_dev_wakeup_lat() and handle a return code. - */ -static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) -{ - omap_pm_set_max_mpu_wakeup_lat(dev, t); -} - -static inline int omap2_i2c_add_bus(int bus_id) -{ - int l; - struct omap_hwmod *oh; - struct platform_device *pdev; - char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; - struct omap_i2c_bus_platform_data *pdata; - struct omap_i2c_dev_attr *dev_attr; - - omap2_i2c_mux_pins(bus_id); - - l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); - WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, - "String buffer overflow in I2C%d device setup\n", bus_id); - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -EEXIST; - } - - pdata = &i2c_pdata[bus_id - 1]; - /* - * pass the hwmod class's CPU-specific knowledge of I2C IP revision in - * use, and functionality implementation flags, up to the OMAP I2C - * driver via platform data - */ - pdata->rev = oh->class->rev; - - dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; - pdata->flags = dev_attr->flags; - - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - * Only omap3 has support for constraints - */ - if (cpu_is_omap34xx()) - pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; - pdev = omap_device_build(name, bus_id, oh, pdata, - sizeof(struct omap_i2c_bus_platform_data), - NULL, 0, 0); - WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - - return PTR_RET(pdev); -} -#else -static inline int omap2_i2c_add_bus(int bus_id) -{ - return 0; -} -#endif - -static int __init omap_i2c_add_bus(int bus_id) -{ - if (cpu_class_is_omap1()) - return omap1_i2c_add_bus(bus_id); - else - return omap2_i2c_add_bus(bus_id); -} - /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options @@ -214,12 +51,11 @@ static int __init omap_i2c_add_bus(int bus_id) */ static int __init omap_i2c_bus_setup(char *str) { - int ports; int ints[3]; - ports = omap_i2c_nr_ports(); get_options(str, 3, ints); - if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports) + if (ints[0] < 2 || ints[1] < 1 || + ints[1] > OMAP_I2C_MAX_CONTROLLERS) return 0; i2c_pdata[ints[1] - 1].clkrate = ints[2]; i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; @@ -239,7 +75,7 @@ static int __init omap_register_i2c_bus_cmdline(void) for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++) if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) { i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - err = omap_i2c_add_bus(i + 1); + err = omap_i2c_add_bus(&i2c_pdata[i], i + 1); if (err) goto out; } @@ -264,7 +100,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, { int err; - BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports()); + BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); if (info) { err = i2c_register_board_info(bus_id, info, len); @@ -277,5 +113,5 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - return omap_i2c_add_bus(bus_id); + return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id); } diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h index 0a87b052f8f7..6f506ba9e453 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/dma.h + * OMAP DMA handling defines and function * * Copyright (C) 2003 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com> @@ -23,187 +23,8 @@ #include <linux/platform_device.h> -/* - * TODO: These dma channel defines should go away once all - * the omap drivers hwmod adapted. - */ - -/* Move omap4 specific defines to dma-44xx.h */ -#include "dma-44xx.h" - #define INT_DMA_LCD 25 -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ -#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ - -/* Only for AM35xx */ -#define AM35XX_DMA_UART4_TX 54 -#define AM35XX_DMA_UART4_RX 55 - -/*----------------------------------------------------------------------------*/ - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -309,10 +130,12 @@ #define SRC_PORT BIT(0x7) #define DST_PORT BIT(0x8) #define SRC_INDEX BIT(0x9) -#define DST_INDEX BIT(0xA) -#define IS_BURST_ONLY4 BIT(0xB) -#define CLEAR_CSR_ON_READ BIT(0xC) -#define IS_WORD_16 BIT(0xD) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) /* Defines for DMA Capabilities */ #define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) @@ -449,7 +272,15 @@ struct omap_system_dma_plat_info { u32 (*dma_read)(int reg, int lch); }; -extern void __init omap_init_consistent_dma_size(void); +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 +#endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h deleted file mode 100644 index 025d85a3ee86..000000000000 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * clkdev <-> OMAP integration - * - * Russell King <linux@arm.linux.org.uk> - * - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H - -#include <linux/clkdev.h> - -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) /* 7xx, 850 */ -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ -#define CK_242X (1 << 4) -#define CK_243X (1 << 5) /* 243x, 253x */ -#define CK_3430ES1 (1 << 6) /* 34xxES1 only */ -#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_AM35XX (1 << 9) /* Sitara AM35xx */ -#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ -#define CK_443X (1 << 11) -#define CK_TI816X (1 << 12) -#define CK_446X (1 << 13) -#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */ -#define CK_1710 (1 << 15) /* 1710 extra for rate selection */ - - -#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) - - -#endif - diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h deleted file mode 100644 index e2e2d045e428..000000000000 --- a/arch/arm/plat-omap/include/plat/clock.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * OMAP clock: data structure definitions, function prototypes, shared macros - * - * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -#include <linux/list.h> - -struct module; -struct clk; -struct clockdomain; - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) -#define __clk_get_parent(clk) (clk->parent) -#define __clk_get_rate(clk) (clk->rate) - -/** - * struct clkops - some clock function pointers - * @enable: fn ptr that enables the current clock in hardware - * @disable: fn ptr that enables the current clock in hardware - * @find_idlest: function returning the IDLEST register for the clock's IP blk - * @find_companion: function returning the "companion" clk reg for the clock - * @allow_idle: fn ptr that enables autoidle for the current clock in hardware - * @deny_idle: fn ptr that disables autoidle for the current clock in hardware - * - * A "companion" clk is an accompanying clock to the one being queried - * that must be enabled for the IP module connected to the clock to - * become accessible by the hardware. Neither @find_idlest nor - * @find_companion should be needed; that information is IP - * block-specific; the hwmod code has been created to handle this, but - * until hwmod data is ready and drivers have been converted to use PM - * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and - * @find_companion must, unfortunately, remain. - */ -struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, - u8 *, u8 *); - void (*find_companion)(struct clk *, void __iomem **, - u8 *); - void (*allow_idle)(struct clk *); - void (*deny_idle)(struct clk *); -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -/* struct clksel_rate.flags possibilities */ -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) -#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ -#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ -#define RATE_IN_36XX (1 << 4) -#define RATE_IN_4430 (1 << 5) -#define RATE_IN_TI816X (1 << 6) -#define RATE_IN_4460 (1 << 7) -#define RATE_IN_AM33XX (1 << 8) -#define RATE_IN_TI814X (1 << 9) - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) -#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) -#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) -#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) - -/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ -#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) - - -/** - * struct clksel_rate - register bitfield values corresponding to clk divisors - * @val: register bitfield value (shifted to bit 0) - * @div: clock divisor corresponding to @val - * @flags: (see "struct clksel_rate.flags possibilities" above) - * - * @val should match the value of a read from struct clk.clksel_reg - * AND'ed with struct clk.clksel_mask, shifted right to bit 0. - * - * @div is the divisor that should be applied to the parent clock's rate - * to produce the current clock's rate. - */ -struct clksel_rate { - u32 val; - u8 div; - u16 flags; -}; - -/** - * struct clksel - available parent clocks, and a pointer to their divisors - * @parent: struct clk * to a possible parent clock - * @rates: available divisors for this parent clock - * - * A struct clksel is always associated with one or more struct clks - * and one or more struct clksel_rates. - */ -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - -/** - * struct dpll_data - DPLL registers and integration data - * @mult_div1_reg: register containing the DPLL M and N bitfields - * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg - * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg - * @clk_bypass: struct clk pointer to the clock's bypass clock input - * @clk_ref: struct clk pointer to the clock's reference clock input - * @control_reg: register containing the DPLL mode bitfield - * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() - * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() - * @max_multiplier: maximum valid non-bypass multiplier value (actual) - * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() - * @min_divider: minimum valid non-bypass divider value (actual) - * @max_divider: maximum valid non-bypass divider value (actual) - * @modes: possible values of @enable_mask - * @autoidle_reg: register containing the DPLL autoidle mode bitfield - * @idlest_reg: register containing the DPLL idle status bitfield - * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg - * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg - * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg - * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg - * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs - * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs - * @flags: DPLL type/features (see below) - * - * Possible values for @flags: - * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) - * - * @freqsel_mask is only used on the OMAP34xx family and AM35xx. - * - * XXX Some DPLLs have multiple bypass inputs, so it's not technically - * correct to only have one @clk_bypass pointer. - * - * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, - * @last_rounded_n) should be separated from the runtime-fixed fields - * and placed into a different structure, so that the runtime-fixed data - * can be placed into read-only space. - */ -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - struct clk *clk_bypass; - struct clk *clk_ref; - void __iomem *control_reg; - u32 enable_mask; - unsigned long last_rounded_rate; - u16 last_rounded_m; - u16 max_multiplier; - u8 last_rounded_n; - u8 min_divider; - u16 max_divider; - u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; - u32 autoidle_mask; - u32 freqsel_mask; - u32 idlest_mask; - u32 dco_mask; - u32 sddiv_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - u8 flags; -}; - -#endif - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children - * @rate: current clock rate - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @recalc: fn ptr that returns the clock's current rate - * @set_rate: fn ptr that can change the clock's current rate - * @round_rate: fn ptr that can round the clock's current rate - * @init: fn ptr to do clock-specific initialization - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled - * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div - * @flags: see "struct clk.flags possibilities" above - * @clksel_reg: for clksel clks, register va containing src/divisor select - * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector - * @clksel: for clksel clks, pointer to struct clksel for this clock - * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock - * @clkdm_name: clockdomain name that this clock is contained in - * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @clkdm, @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. - */ -struct clk { - struct list_head node; - const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ - unsigned long rate; - void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - u8 enable_bit; - s8 usecount; - u8 fixed_div; - u8 flags; -#ifdef CONFIG_ARCH_OMAP2PLUS - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; - const char *clkdm_name; - struct clockdomain *clkdm; -#else - u8 rate_offset; - u8 src_offset; -#endif -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -}; - -extern int mpurate; - -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); -extern struct clk *omap_clk_get_by_name(const char *name); -extern int omap_clk_enable_autoidle_all(void); -extern int omap_clk_disable_autoidle_all(void); - -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; - -#endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h deleted file mode 100644 index d1cb6f527b7e..000000000000 --- a/arch/arm/plat-omap/include/plat/common.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -#include <plat/i2c.h> -#include <plat/omap_hwmod.h> - -extern int __init omap_init_clocksource_32k(void __iomem *vbase); - -extern void __init omap_check_revision(void); - -extern void omap_reserve(void); -extern int omap_dss_reset(struct omap_hwmod *); - -void omap_sram_init(void); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h new file mode 100644 index 000000000000..da000d482ff2 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/counter-32k.h @@ -0,0 +1 @@ +int omap_init_clocksource_32k(void __iomem *vbase); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 67da857783ce..b4516aba67ed 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/cpu.h - * * OMAP cpu type detection * * Copyright (C) 2004, 2008 Nokia Corporation @@ -30,470 +28,12 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H -#ifndef __ASSEMBLY__ - -#include <linux/bitops.h> -#include <plat/multi.h> - -/* - * Omap device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - -int omap_type(void); - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 - * cpu_is_omap447x(): True for OMAP4470 - * soc_is_omap543x(): True for OMAP5430, OMAP5432 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_AM_CLASS(class, id) \ -static inline int is_am ##class (void) \ -{ \ - return (GET_AM_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_TI_CLASS(class, id) \ -static inline int is_ti ##class (void) \ -{ \ - return (GET_TI_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_TI_SUBCLASS(subclass, id) \ -static inline int is_ti ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_AM_SUBCLASS(subclass, id) \ -static inline int is_am ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) -IS_OMAP_CLASS(24xx, 0x24) -IS_OMAP_CLASS(34xx, 0x34) -IS_OMAP_CLASS(44xx, 0x44) -IS_AM_CLASS(35xx, 0x35) -IS_OMAP_CLASS(54xx, 0x54) -IS_AM_CLASS(33xx, 0x33) - -IS_TI_CLASS(81xx, 0x81) - -IS_OMAP_SUBCLASS(242x, 0x242) -IS_OMAP_SUBCLASS(243x, 0x243) -IS_OMAP_SUBCLASS(343x, 0x343) -IS_OMAP_SUBCLASS(363x, 0x363) -IS_OMAP_SUBCLASS(443x, 0x443) -IS_OMAP_SUBCLASS(446x, 0x446) -IS_OMAP_SUBCLASS(447x, 0x447) -IS_OMAP_SUBCLASS(543x, 0x543) - -IS_TI_SUBCLASS(816x, 0x816) -IS_TI_SUBCLASS(814x, 0x814) -IS_AM_SUBCLASS(335x, 0x335) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_ti81xx() 0 -#define cpu_is_ti816x() 0 -#define cpu_is_ti814x() 0 -#define soc_is_am35xx() 0 -#define soc_is_am33xx() 0 -#define soc_is_am335x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 -#define cpu_is_omap447x() 0 -#define soc_is_omap54xx() 0 -#define soc_is_omap543x() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -#if defined(MULTI_OMAP2) -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() is_omap24xx() -# endif -# if defined (CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() is_omap242x() -# endif -# if defined (CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() is_omap243x() -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() -# endif -#else -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 -# endif -# if defined(CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) -IS_OMAP_TYPE(2420, 0x2420) -IS_OMAP_TYPE(2422, 0x2422) -IS_OMAP_TYPE(2423, 0x2423) -IS_OMAP_TYPE(2430, 0x2430) -IS_OMAP_TYPE(3430, 0x3430) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 -#define cpu_is_omap3630() 0 -#define soc_is_omap5430() 0 - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() -#endif - -#if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap3430 -# undef cpu_is_ti81xx -# undef cpu_is_ti816x -# undef cpu_is_ti814x -# undef soc_is_am35xx -# define cpu_is_omap3430() is_omap3430() -# undef cpu_is_omap3630 -# define cpu_is_omap3630() is_omap363x() -# define cpu_is_ti81xx() is_ti81xx() -# define cpu_is_ti816x() is_ti816x() -# define cpu_is_ti814x() is_ti814x() -# define soc_is_am35xx() is_am35xx() +#ifdef CONFIG_ARCH_OMAP1 +#include <mach/soc.h> #endif -# if defined(CONFIG_SOC_AM33XX) -# undef soc_is_am33xx -# undef soc_is_am335x -# define soc_is_am33xx() is_am33xx() -# define soc_is_am335x() is_am335x() +#ifdef CONFIG_ARCH_OMAP2PLUS +#include "../../mach-omap2/soc.h" #endif -# if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# undef cpu_is_omap446x -# undef cpu_is_omap447x -# define cpu_is_omap44xx() is_omap44xx() -# define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() -# define cpu_is_omap447x() is_omap447x() -# endif - -# if defined(CONFIG_SOC_OMAP5) -# undef soc_is_omap54xx -# undef soc_is_omap543x -# define soc_is_omap54xx() is_omap54xx() -# define soc_is_omap543x() is_omap543x() -#endif - -/* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ - cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx() || \ - soc_is_am33xx()) - -/* Various silicon revisions for omap2 */ -#define OMAP242X_CLASS 0x24200024 -#define OMAP2420_REV_ES1_0 OMAP242X_CLASS -#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) - -#define OMAP243X_CLASS 0x24300024 -#define OMAP2430_REV_ES1_0 OMAP243X_CLASS - -#define OMAP343X_CLASS 0x34300034 -#define OMAP3430_REV_ES1_0 OMAP343X_CLASS -#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) -#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) -#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) -#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) -#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) - -#define OMAP363X_CLASS 0x36300034 -#define OMAP3630_REV_ES1_0 OMAP363X_CLASS -#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) -#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) - -#define TI816X_CLASS 0x81600034 -#define TI8168_REV_ES1_0 TI816X_CLASS -#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) - -#define TI814X_CLASS 0x81400034 -#define TI8148_REV_ES1_0 TI814X_CLASS -#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) -#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) - -#define AM35XX_CLASS 0x35170034 -#define AM35XX_REV_ES1_0 AM35XX_CLASS -#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) - -#define AM335X_CLASS 0x33500033 -#define AM335X_REV_ES1_0 AM335X_CLASS - -#define OMAP443X_CLASS 0x44300044 -#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) -#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) -#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) -#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) -#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) - -#define OMAP446X_CLASS 0x44600044 -#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) -#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8)) - -#define OMAP447X_CLASS 0x44700044 -#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) - -#define OMAP54XX_CLASS 0x54000054 -#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) -#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) - -void omap2xxx_check_revision(void); -void omap3xxx_check_revision(void); -void omap4xxx_check_revision(void); -void omap5xxx_check_revision(void); -void omap3xxx_check_features(void); -void ti81xx_check_features(void); -void omap4xxx_check_features(void); - -/* - * Runtime detection of OMAP3 features - * - * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip - * family have OS-level control over the I/O chain clock. This is - * to avoid a window during which wakeups could potentially be lost - * during powerdomain transitions. If this bit is set, it - * indicates that the chip does support OS-level control of this - * feature. - */ -extern u32 omap_features; - -#define OMAP3_HAS_L2CACHE BIT(0) -#define OMAP3_HAS_IVA BIT(1) -#define OMAP3_HAS_SGX BIT(2) -#define OMAP3_HAS_NEON BIT(3) -#define OMAP3_HAS_ISP BIT(4) -#define OMAP3_HAS_192MHZ_CLK BIT(5) -#define OMAP3_HAS_IO_WAKEUP BIT(6) -#define OMAP3_HAS_SDRC BIT(7) -#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) -#define OMAP4_HAS_MPU_1GHZ BIT(9) -#define OMAP4_HAS_MPU_1_2GHZ BIT(10) -#define OMAP4_HAS_MPU_1_5GHZ BIT(11) - - -#define OMAP3_HAS_FEATURE(feat,flag) \ -static inline unsigned int omap3_has_ ##feat(void) \ -{ \ - return omap_features & OMAP3_HAS_ ##flag; \ -} \ - -OMAP3_HAS_FEATURE(l2cache, L2CACHE) -OMAP3_HAS_FEATURE(sgx, SGX) -OMAP3_HAS_FEATURE(iva, IVA) -OMAP3_HAS_FEATURE(neon, NEON) -OMAP3_HAS_FEATURE(isp, ISP) -OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) -OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) -OMAP3_HAS_FEATURE(sdrc, SDRC) -OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) - -/* - * Runtime detection of OMAP4 features - */ -#define OMAP4_HAS_FEATURE(feat, flag) \ -static inline unsigned int omap4_has_ ##feat(void) \ -{ \ - return omap_features & OMAP4_HAS_ ##flag; \ -} \ - -OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) -OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) -OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) - -#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h index a4edbd2f7484..8fc4287222dd 100644 --- a/arch/arm/mach-omap2/debug-devices.h +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -1,9 +1,2 @@ -#ifndef _OMAP_DEBUG_DEVICES_H -#define _OMAP_DEBUG_DEVICES_H - -#include <linux/types.h> - /* for TI reference platforms sharing the same debug card */ extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h deleted file mode 100644 index 1f767cb2f38a..000000000000 --- a/arch/arm/plat-omap/include/plat/dma-44xx.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * OMAP4 SDMA channel definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * Paul Walmsley (paul@pwsan.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H - -#define OMAP44XX_DMA_SYS_REQ0 2 -#define OMAP44XX_DMA_SYS_REQ1 3 -#define OMAP44XX_DMA_GPMC 4 -#define OMAP44XX_DMA_DSS_DISPC_REQ 6 -#define OMAP44XX_DMA_SYS_REQ2 7 -#define OMAP44XX_DMA_MCASP1_AXEVT 8 -#define OMAP44XX_DMA_ISS_REQ1 9 -#define OMAP44XX_DMA_ISS_REQ2 10 -#define OMAP44XX_DMA_MCASP1_AREVT 11 -#define OMAP44XX_DMA_ISS_REQ3 12 -#define OMAP44XX_DMA_ISS_REQ4 13 -#define OMAP44XX_DMA_DSS_RFBI_REQ 14 -#define OMAP44XX_DMA_SPI3_TX0 15 -#define OMAP44XX_DMA_SPI3_RX0 16 -#define OMAP44XX_DMA_MCBSP2_TX 17 -#define OMAP44XX_DMA_MCBSP2_RX 18 -#define OMAP44XX_DMA_MCBSP3_TX 19 -#define OMAP44XX_DMA_MCBSP3_RX 20 -#define OMAP44XX_DMA_C2C_SSCM_GPO0 21 -#define OMAP44XX_DMA_C2C_SSCM_GPO1 22 -#define OMAP44XX_DMA_SPI3_TX1 23 -#define OMAP44XX_DMA_SPI3_RX1 24 -#define OMAP44XX_DMA_I2C3_TX 25 -#define OMAP44XX_DMA_I2C3_RX 26 -#define OMAP44XX_DMA_I2C1_TX 27 -#define OMAP44XX_DMA_I2C1_RX 28 -#define OMAP44XX_DMA_I2C2_TX 29 -#define OMAP44XX_DMA_I2C2_RX 30 -#define OMAP44XX_DMA_MCBSP4_TX 31 -#define OMAP44XX_DMA_MCBSP4_RX 32 -#define OMAP44XX_DMA_MCBSP1_TX 33 -#define OMAP44XX_DMA_MCBSP1_RX 34 -#define OMAP44XX_DMA_SPI1_TX0 35 -#define OMAP44XX_DMA_SPI1_RX0 36 -#define OMAP44XX_DMA_SPI1_TX1 37 -#define OMAP44XX_DMA_SPI1_RX1 38 -#define OMAP44XX_DMA_SPI1_TX2 39 -#define OMAP44XX_DMA_SPI1_RX2 40 -#define OMAP44XX_DMA_SPI1_TX3 41 -#define OMAP44XX_DMA_SPI1_RX3 42 -#define OMAP44XX_DMA_SPI2_TX0 43 -#define OMAP44XX_DMA_SPI2_RX0 44 -#define OMAP44XX_DMA_SPI2_TX1 45 -#define OMAP44XX_DMA_SPI2_RX1 46 -#define OMAP44XX_DMA_MMC2_TX 47 -#define OMAP44XX_DMA_MMC2_RX 48 -#define OMAP44XX_DMA_UART1_TX 49 -#define OMAP44XX_DMA_UART1_RX 50 -#define OMAP44XX_DMA_UART2_TX 51 -#define OMAP44XX_DMA_UART2_RX 52 -#define OMAP44XX_DMA_UART3_TX 53 -#define OMAP44XX_DMA_UART3_RX 54 -#define OMAP44XX_DMA_UART4_TX 55 -#define OMAP44XX_DMA_UART4_RX 56 -#define OMAP44XX_DMA_MMC4_TX 57 -#define OMAP44XX_DMA_MMC4_RX 58 -#define OMAP44XX_DMA_MMC5_TX 59 -#define OMAP44XX_DMA_MMC5_RX 60 -#define OMAP44XX_DMA_MMC1_TX 61 -#define OMAP44XX_DMA_MMC1_RX 62 -#define OMAP44XX_DMA_SYS_REQ3 64 -#define OMAP44XX_DMA_MCPDM_UP 65 -#define OMAP44XX_DMA_MCPDM_DL 66 -#define OMAP44XX_DMA_DMIC_REQ 67 -#define OMAP44XX_DMA_C2C_SSCM_GPO2 68 -#define OMAP44XX_DMA_C2C_SSCM_GPO3 69 -#define OMAP44XX_DMA_SPI4_TX0 70 -#define OMAP44XX_DMA_SPI4_RX0 71 -#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 -#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 -#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 -#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 -#define OMAP44XX_DMA_DSS_HDMI_REQ 76 -#define OMAP44XX_DMA_MMC3_TX 77 -#define OMAP44XX_DMA_MMC3_RX 78 -#define OMAP44XX_DMA_USIM_TX 79 -#define OMAP44XX_DMA_USIM_RX 80 -#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 -#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 -#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 -#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 -#define OMAP44XX_DMA_SLIMBUS1_TX0 85 -#define OMAP44XX_DMA_SLIMBUS1_TX1 86 -#define OMAP44XX_DMA_SLIMBUS1_TX2 87 -#define OMAP44XX_DMA_SLIMBUS1_TX3 88 -#define OMAP44XX_DMA_SLIMBUS1_RX0 89 -#define OMAP44XX_DMA_SLIMBUS1_RX1 90 -#define OMAP44XX_DMA_SLIMBUS1_RX2 91 -#define OMAP44XX_DMA_SLIMBUS1_RX3 92 -#define OMAP44XX_DMA_SLIMBUS2_TX0 93 -#define OMAP44XX_DMA_SLIMBUS2_TX1 94 -#define OMAP44XX_DMA_SLIMBUS2_TX2 95 -#define OMAP44XX_DMA_SLIMBUS2_TX3 96 -#define OMAP44XX_DMA_SLIMBUS2_RX0 97 -#define OMAP44XX_DMA_SLIMBUS2_RX1 98 -#define OMAP44XX_DMA_SLIMBUS2_RX2 99 -#define OMAP44XX_DMA_SLIMBUS2_RX3 100 -#define OMAP44XX_DMA_ABE_REQ_0 101 -#define OMAP44XX_DMA_ABE_REQ_1 102 -#define OMAP44XX_DMA_ABE_REQ_2 103 -#define OMAP44XX_DMA_ABE_REQ_3 104 -#define OMAP44XX_DMA_ABE_REQ_4 105 -#define OMAP44XX_DMA_ABE_REQ_5 106 -#define OMAP44XX_DMA_ABE_REQ_6 107 -#define OMAP44XX_DMA_ABE_REQ_7 108 -#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109 -#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110 -#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111 -#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112 -#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113 -#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114 -#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115 -#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116 -#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117 -#define OMAP44XX_DMA_SHA2_CTXIN_P 118 -#define OMAP44XX_DMA_SHA2_DIN_P 119 -#define OMAP44XX_DMA_SHA2_CTXOUT_P 120 -#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121 -#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122 -#define OMAP44XX_DMA_I2C4_TX 124 -#define OMAP44XX_DMA_I2C4_RX 125 - -#endif diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 85868e98c11c..a3fbc48c332e 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -32,7 +32,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/platform_device.h> @@ -55,6 +54,10 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 +/* posted mode types */ +#define OMAP_TIMER_NONPOSTED 0x00 +#define OMAP_TIMER_POSTED 0x01 + /* timer capabilities used in hwmod database */ #define OMAP_TIMER_SECURE 0x80000000 #define OMAP_TIMER_ALWON 0x40000000 @@ -62,16 +65,22 @@ #define OMAP_TIMER_NEEDS_RESET 0x10000000 #define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 +/* + * timer errata flags + * + * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This + * errata prevents us from using posted mode on these devices, unless the + * timer counter register is never read. For more details please refer to + * the OMAP3/4/5 errata documents. + */ +#define OMAP_TIMER_ERRATA_I103_I767 0x80000000 + struct omap_timer_capability_dev_attr { u32 timer_capability; }; -struct omap_dm_timer; - struct timer_regs { u32 tidr; - u32 tistat; - u32 tisr; u32 tier; u32 twer; u32 tclr; @@ -90,15 +99,35 @@ struct timer_regs { u32 towr; }; -struct dmtimer_platform_data { - /* set_timer_src - Only used for OMAP1 devices */ - int (*set_timer_src)(struct platform_device *pdev, int source); - u32 timer_capability; +struct omap_dm_timer { + int id; + int irq; + struct clk *fclk; + + void __iomem *io_base; + void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ + void __iomem *irq_ena; /* irq enable */ + void __iomem *irq_dis; /* irq disable, only on v2 ip */ + void __iomem *pend; /* write pending */ + void __iomem *func_base; /* function register base */ + + unsigned long rate; + unsigned reserved:1; + unsigned posted:1; + struct timer_regs context; + int (*get_context_loss_count)(struct device *); + int ctx_loss_count; + int revision; + u32 capability; + u32 errata; + struct platform_device *pdev; + struct list_head node; }; int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap); int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); @@ -120,6 +149,7 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, i int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask); unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); @@ -245,33 +275,6 @@ int omap_dm_timers_active(void); #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) -struct omap_dm_timer { - unsigned long phys_base; - int id; - int irq; - struct clk *fclk; - - void __iomem *io_base; - void __iomem *sys_stat; /* TISTAT timer status */ - void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ - void __iomem *irq_ena; /* irq enable */ - void __iomem *irq_dis; /* irq disable, only on v2 ip */ - void __iomem *pend; /* write pending */ - void __iomem *func_base; /* function register base */ - - unsigned long rate; - unsigned reserved:1; - unsigned posted:1; - struct timer_regs context; - int ctx_loss_count; - int revision; - u32 capability; - struct platform_device *pdev; - struct list_head node; -}; - -int omap_dm_timer_prepare(struct omap_dm_timer *timer); - static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, int posted) { @@ -300,16 +303,13 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) tidr = __raw_readl(timer->io_base); if (!(tidr >> 16)) { timer->revision = 1; - timer->sys_stat = timer->io_base + - OMAP_TIMER_V1_SYS_STAT_OFFSET; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; - timer->irq_dis = NULL; + timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; timer->func_base = timer->io_base; } else { timer->revision = 2; - timer->sys_stat = NULL; timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS; timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET; timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR; @@ -320,45 +320,44 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) } } -/* Assumes the source clock has been set by caller */ -static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer, - int autoidle, int wakeup) +/* + * __omap_dm_timer_enable_posted - enables write posted mode + * @timer: pointer to timer instance handle + * + * Enables the write posted mode for the timer. When posted mode is enabled + * writes to certain timer registers are immediately acknowledged by the + * internal bus and hence prevents stalling the CPU waiting for the write to + * complete. Enabling this feature can improve performance for writing to the + * timer registers. + */ +static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) { - u32 l; + if (timer->posted) + return; - l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); - l |= 0x02 << 3; /* Set to smart-idle mode */ - l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + return; - if (autoidle) - l |= 0x1 << 0; - - if (wakeup) - l |= 1 << 2; - - __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); - - /* Match hardware reset default of posted mode */ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, - OMAP_TIMER_CTRL_POSTED, 0); + OMAP_TIMER_CTRL_POSTED, 0); + timer->context.tsicr = OMAP_TIMER_CTRL_POSTED; + timer->posted = OMAP_TIMER_POSTED; } -static inline int __omap_dm_timer_set_source(struct clk *timer_fck, - struct clk *parent) +/** + * __omap_dm_timer_override_errata - override errata flags for a timer + * @timer: pointer to timer handle + * @errata: errata flags to be ignored + * + * For a given timer, override a timer errata by clearing the flags + * specified by the errata argument. A specific erratum should only be + * overridden for a timer if the timer is used in such a way the erratum + * has no impact. + */ +static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer, + u32 errata) { - int ret; - - clk_disable(timer_fck); - ret = clk_set_parent(timer_fck, parent); - clk_enable(timer_fck); - - /* - * When the functional clock disappears, too quick writes seem - * to cause an abort. XXX Is this still necessary? - */ - __delay(300000); - - return ret; + timer->errata &= ~errata; } static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h deleted file mode 100644 index bd3c6324ae1f..000000000000 --- a/arch/arm/plat-omap/include/plat/fpga.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -extern void omap1510_fpga_init_irq(void); - -#define fpga_read(reg) __raw_readb(reg) -#define fpga_write(val, reg) __raw_writeb(val, reg) - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* PA */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) - -#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 7c22b9e10dc3..7a9028cb5a75 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -18,11 +18,15 @@ * 02110-1301 USA * */ -#ifndef __ASM__ARCH_OMAP_I2C_H -#define __ASM__ARCH_OMAP_I2C_H -#include <linux/i2c.h> -#include <linux/i2c-omap.h> +#ifndef __PLAT_OMAP_I2C_H +#define __PLAT_OMAP_I2C_H + +struct i2c_board_info; +struct omap_i2c_bus_platform_data; + +int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id); #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, @@ -37,23 +41,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, } #endif -/** - * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod - * @fifo_depth: total controller FIFO size (in bytes) - * @flags: differences in hardware support capability - * - * @fifo_depth represents what exists on the hardware, not what is - * actually configured at runtime by the device driver. - */ -struct omap_i2c_dev_attr { - u8 fifo_depth; - u32 flags; -}; - -void __init omap1_i2c_mux_pins(int bus_id); -void __init omap2_i2c_mux_pins(int bus_id); - struct omap_hwmod; int omap_i2c_reset(struct omap_hwmod *oh); -#endif /* __ASM__ARCH_OMAP_I2C_H */ +#endif /* __PLAT_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h deleted file mode 100644 index 68b5f0362f35..000000000000 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ /dev/null @@ -1,221 +0,0 @@ -/* - * omap iommu: main structures - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IOMMU_H -#define __MACH_IOMMU_H - -struct iotlb_entry { - u32 da; - u32 pa; - u32 pgsz, prsvd, valid; - union { - u16 ap; - struct { - u32 endian, elsz, mixed; - }; - }; -}; - -struct omap_iommu { - const char *name; - struct module *owner; - struct clk *clk; - void __iomem *regbase; - struct device *dev; - void *isr_priv; - struct iommu_domain *domain; - - unsigned int refcount; - spinlock_t iommu_lock; /* global for this whole object */ - - /* - * We don't change iopgd for a situation like pgd for a task, - * but share it globally for each iommu. - */ - u32 *iopgd; - spinlock_t page_table_lock; /* protect iopgd */ - - int nr_tlb_entries; - - struct list_head mmap; - struct mutex mmap_lock; /* protect mmap */ - - void *ctx; /* iommu context: registres saved area */ - u32 da_start; - u32 da_end; -}; - -struct cr_regs { - union { - struct { - u16 cam_l; - u16 cam_h; - }; - u32 cam; - }; - union { - struct { - u16 ram_l; - u16 ram_h; - }; - u32 ram; - }; -}; - -struct iotlb_lock { - short base; - short vict; -}; - -/* architecture specific functions */ -struct iommu_functions { - unsigned long version; - - int (*enable)(struct omap_iommu *obj); - void (*disable)(struct omap_iommu *obj); - void (*set_twl)(struct omap_iommu *obj, bool on); - u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra); - - void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr); - void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr); - - struct cr_regs *(*alloc_cr)(struct omap_iommu *obj, - struct iotlb_entry *e); - int (*cr_valid)(struct cr_regs *cr); - u32 (*cr_to_virt)(struct cr_regs *cr); - void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); - ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr, - char *buf); - - u32 (*get_pte_attr)(struct iotlb_entry *e); - - void (*save_ctx)(struct omap_iommu *obj); - void (*restore_ctx)(struct omap_iommu *obj); - ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len); -}; - -/** - * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod - * @da_start: device address where the va space starts. - * @da_end: device address where the va space ends. - * @nr_tlb_entries: number of entries supported by the translation - * look-aside buffer (TLB). - */ -struct omap_mmu_dev_attr { - u32 da_start; - u32 da_end; - int nr_tlb_entries; -}; - -struct iommu_platform_data { - const char *name; - const char *clk_name; - const int nr_tlb_entries; - u32 da_start; - u32 da_end; -}; - -/** - * struct iommu_arch_data - omap iommu private data - * @name: name of the iommu device - * @iommu_dev: handle of the iommu device - * - * This is an omap iommu private data object, which binds an iommu user - * to its iommu device. This object should be placed at the iommu user's - * dev_archdata so generic IOMMU API can be used without having to - * utilize omap-specific plumbing anymore. - */ -struct omap_iommu_arch_data { - const char *name; - struct omap_iommu *iommu_dev; -}; - -#ifdef CONFIG_IOMMU_API -/** - * dev_to_omap_iommu() - retrieves an omap iommu object from a user device - * @dev: iommu client device - */ -static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev) -{ - struct omap_iommu_arch_data *arch_data = dev->archdata.iommu; - - return arch_data->iommu_dev; -} -#endif - -/* IOMMU errors */ -#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0) -#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1) -#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2) -#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3) -#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4) - -#if defined(CONFIG_ARCH_OMAP1) -#error "iommu for this processor not implemented yet" -#else -#include <plat/iommu2.h> -#endif - -/* - * utilities for super page(16MB, 1MB, 64KB and 4KB) - */ - -#define iopgsz_max(bytes) \ - (((bytes) >= SZ_16M) ? SZ_16M : \ - ((bytes) >= SZ_1M) ? SZ_1M : \ - ((bytes) >= SZ_64K) ? SZ_64K : \ - ((bytes) >= SZ_4K) ? SZ_4K : 0) - -#define bytes_to_iopgsz(bytes) \ - (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \ - ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \ - ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \ - ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1) - -#define iopgsz_to_bytes(iopgsz) \ - (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \ - ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \ - ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \ - ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0) - -#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0) - -/* - * global functions - */ -extern u32 omap_iommu_arch_version(void); - -extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); - -extern int -omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e); - -extern int omap_iommu_set_isr(const char *name, - int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs, - void *priv), - void *isr_priv); - -extern void omap_iommu_save_ctx(struct device *dev); -extern void omap_iommu_restore_ctx(struct device *dev); - -extern int omap_install_iommu_arch(const struct iommu_functions *ops); -extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops); - -extern int omap_foreach_iommu_device(void *data, - int (*fn)(struct device *, void *)); - -extern ssize_t -omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len); -extern size_t -omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len); - -#endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h deleted file mode 100644 index d4116b595e40..000000000000 --- a/arch/arm/plat-omap/include/plat/iommu2.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * omap iommu: omap2 architecture specific definitions - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IOMMU2_H -#define __MACH_IOMMU2_H - -#include <linux/io.h> - -/* - * MMU Register offsets - */ -#define MMU_REVISION 0x00 -#define MMU_SYSCONFIG 0x10 -#define MMU_SYSSTATUS 0x14 -#define MMU_IRQSTATUS 0x18 -#define MMU_IRQENABLE 0x1c -#define MMU_WALKING_ST 0x40 -#define MMU_CNTL 0x44 -#define MMU_FAULT_AD 0x48 -#define MMU_TTB 0x4c -#define MMU_LOCK 0x50 -#define MMU_LD_TLB 0x54 -#define MMU_CAM 0x58 -#define MMU_RAM 0x5c -#define MMU_GFLUSH 0x60 -#define MMU_FLUSH_ENTRY 0x64 -#define MMU_READ_CAM 0x68 -#define MMU_READ_RAM 0x6c -#define MMU_EMU_FAULT_AD 0x70 - -#define MMU_REG_SIZE 256 - -/* - * MMU Register bit definitions - */ -#define MMU_LOCK_BASE_SHIFT 10 -#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT) -#define MMU_LOCK_BASE(x) \ - ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT) - -#define MMU_LOCK_VICT_SHIFT 4 -#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT) -#define MMU_LOCK_VICT(x) \ - ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT) - -#define MMU_CAM_VATAG_SHIFT 12 -#define MMU_CAM_VATAG_MASK \ - ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT) -#define MMU_CAM_P (1 << 3) -#define MMU_CAM_V (1 << 2) -#define MMU_CAM_PGSZ_MASK 3 -#define MMU_CAM_PGSZ_1M (0 << 0) -#define MMU_CAM_PGSZ_64K (1 << 0) -#define MMU_CAM_PGSZ_4K (2 << 0) -#define MMU_CAM_PGSZ_16M (3 << 0) - -#define MMU_RAM_PADDR_SHIFT 12 -#define MMU_RAM_PADDR_MASK \ - ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT) -#define MMU_RAM_ENDIAN_SHIFT 9 -#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ELSZ_SHIFT 7 -#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_MIXED_SHIFT 6 -#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT) -#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK - -/* - * register accessors - */ -static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs) -{ - return __raw_readl(obj->regbase + offs); -} - -static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs) -{ - __raw_writel(val, obj->regbase + offs); -} - -#endif /* __MACH_IOMMU2_H */ diff --git a/arch/arm/plat-omap/include/plat/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h deleted file mode 100644 index 66a813977d52..000000000000 --- a/arch/arm/plat-omap/include/plat/iopgtable.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * omap iommu: pagetable definitions - * - * Copyright (C) 2008-2010 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_OMAP_IOMMU_H -#define __PLAT_OMAP_IOMMU_H - -/* - * "L2 table" address mask and size definitions. - */ -#define IOPGD_SHIFT 20 -#define IOPGD_SIZE (1UL << IOPGD_SHIFT) -#define IOPGD_MASK (~(IOPGD_SIZE - 1)) - -/* - * "section" address mask and size definitions. - */ -#define IOSECTION_SHIFT 20 -#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT) -#define IOSECTION_MASK (~(IOSECTION_SIZE - 1)) - -/* - * "supersection" address mask and size definitions. - */ -#define IOSUPER_SHIFT 24 -#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT) -#define IOSUPER_MASK (~(IOSUPER_SIZE - 1)) - -#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT)) -#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32)) - -/* - * "small page" address mask and size definitions. - */ -#define IOPTE_SHIFT 12 -#define IOPTE_SIZE (1UL << IOPTE_SHIFT) -#define IOPTE_MASK (~(IOPTE_SIZE - 1)) - -/* - * "large page" address mask and size definitions. - */ -#define IOLARGE_SHIFT 16 -#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT) -#define IOLARGE_MASK (~(IOLARGE_SIZE - 1)) - -#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT)) -#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32)) - -#define IOPAGE_MASK IOPTE_MASK - -/** - * omap_iommu_translate() - va to pa translation - * @d: omap iommu descriptor - * @va: virtual address - * @mask: omap iommu descriptor mask - * - * va to pa translation - */ -static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask) -{ - return (d & mask) | (va & (~mask)); -} - -/* - * some descriptor attributes. - */ -#define IOPGD_TABLE (1 << 0) -#define IOPGD_SECTION (2 << 0) -#define IOPGD_SUPER (1 << 18 | 2 << 0) - -#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE) -#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION) -#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER) - -#define IOPTE_SMALL (2 << 0) -#define IOPTE_LARGE (1 << 0) - -#define iopte_is_small(x) (((x) & 2) == IOPTE_SMALL) -#define iopte_is_large(x) (((x) & 3) == IOPTE_LARGE) - -/* to find an entry in a page-table-directory */ -#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) -#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) - -#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) -#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd))) - -/* to find an entry in the second-level page table. */ -#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1)) -#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da)) - -static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, - u32 flags) -{ - memset(e, 0, sizeof(*e)); - - e->da = da; - e->pa = pa; - e->valid = 1; - /* FIXME: add OMAP1 support */ - e->pgsz = flags & MMU_CAM_PGSZ_MASK; - e->endian = flags & MMU_RAM_ENDIAN_MASK; - e->elsz = flags & MMU_RAM_ELSZ_MASK; - e->mixed = flags & MMU_RAM_MIXED_MASK; - - return iopgsz_to_bytes(e->pgsz); -} - -#define to_iommu(dev) \ - (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev)) - -#endif /* __PLAT_OMAP_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h deleted file mode 100644 index 498e57cda6cd..000000000000 --- a/arch/arm/plat-omap/include/plat/iovmm.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * omap iommu: simple virtual address space management - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOMMU_MMAP_H -#define __IOMMU_MMAP_H - -#include <linux/iommu.h> - -struct iovm_struct { - struct omap_iommu *iommu; /* iommu object which this belongs to */ - u32 da_start; /* area definition */ - u32 da_end; - u32 flags; /* IOVMF_: see below */ - struct list_head list; /* linked in ascending order */ - const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ - void *va; /* mpu side mapped address */ -}; - -/* - * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma) - * - * lower 16 bit is used for h/w and upper 16 bit is for s/w. - */ -#define IOVMF_SW_SHIFT 16 - -/* - * iovma: h/w flags derived from cam and ram attribute - */ -#define IOVMF_CAM_MASK (~((1 << 10) - 1)) -#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK) - -#define IOVMF_PGSZ_MASK (3 << 0) -#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M -#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K -#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K -#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M - -#define IOVMF_ENDIAN_MASK (1 << 9) -#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG -#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE - -#define IOVMF_ELSZ_MASK (3 << 7) -#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 -#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16 -#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32 -#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE - -#define IOVMF_MIXED_MASK (1 << 6) -#define IOVMF_MIXED MMU_RAM_MIXED - -/* - * iovma: s/w flags, used for mapping and umapping internally. - */ -#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT) -#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT) -#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT) - -/* "superpages" is supported just with physically linear pages */ -#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT)) -#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT)) -#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT)) - -#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) - - -extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da); -extern u32 -omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da, - const struct sg_table *sgt, u32 flags); -extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain, - struct device *dev, u32 da); -extern u32 -omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev, - u32 da, size_t bytes, u32 flags); -extern void -omap_iommu_vfree(struct iommu_domain *domain, struct device *dev, - const u32 da); -extern void *omap_da_to_va(struct device *dev, u32 da); - -#endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h deleted file mode 100644 index 25e451e7e2fd..000000000000 --- a/arch/arm/plat-omap/include/plat/led.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/led.h - * - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h deleted file mode 100644 index 4a970ec62dd1..000000000000 --- a/arch/arm/plat-omap/include/plat/menelaus.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/menelaus.h - * - * Functions to access Menelaus power management chip - */ - -#ifndef __ASM_ARCH_MENELAUS_H -#define __ASM_ARCH_MENELAUS_H - -struct device; - -struct menelaus_platform_data { - int (* late_init)(struct device *dev); -}; - -extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data); -extern void menelaus_unregister_mmc_callback(void); -extern int menelaus_set_mmc_opendrain(int slot, int enable); -extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); - -extern int menelaus_set_vmem(unsigned int mV); -extern int menelaus_set_vio(unsigned int mV); -extern int menelaus_set_vmmc(unsigned int mV); -extern int menelaus_set_vaux(unsigned int mV); -extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); -extern int menelaus_set_slot_sel(int enable); -extern int menelaus_get_slot_pin_states(void); -extern int menelaus_set_vcore_sw(unsigned int mV); -extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); - -#define EN_VPLL_SLEEP (1 << 7) -#define EN_VMMC_SLEEP (1 << 6) -#define EN_VAUX_SLEEP (1 << 5) -#define EN_VIO_SLEEP (1 << 4) -#define EN_VMEM_SLEEP (1 << 3) -#define EN_DC3_SLEEP (1 << 2) -#define EN_DC2_SLEEP (1 << 1) -#define EN_VC_SLEEP (1 << 0) - -extern int menelaus_set_regulator_sleep(int enable, u32 val); - -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS) -#define omap_has_menelaus() 1 -#else -#define omap_has_menelaus() 0 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h deleted file mode 100644 index 8b4e4f2da2f5..000000000000 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include <linux/types.h> -#include <linux/device.h> -#include <linux/mmc/host.h> - -#include <plat/omap_hwmod.h> - -#define OMAP15XX_NR_MMC 1 -#define OMAP16XX_NR_MMC 2 -#define OMAP1_MMC_SIZE 0x080 -#define OMAP1_MMC1_BASE 0xfffb7800 -#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -#define OMAP24XX_NR_MMC 2 -#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP2_MMC1_BASE 0x4809c000 - -#define OMAP4_MMC_REG_OFFSET 0x100 - -#define OMAP_MMC_MAX_SLOTS 2 - -/* - * struct omap_mmc_dev_attr.flags possibilities - * - * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can - * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag - * should be set if this is the case. See for example Section 22.5.3 - * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia - * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). - * - * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers - * don't work correctly on some MMC controller instances on some - * OMAP3 SoCs; this flag should be set if this is the case. See - * for example Advisory 2.1.1.128 "MMC: Multiple Block Read - * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ - * Revision F (October 2010) (SPRZ278F). - */ -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) -#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) - -struct omap_mmc_dev_attr { - u8 flags; -}; - -struct omap_mmc_platform_data { - /* back-link to device */ - struct device *dev; - - /* number of slots per controller */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (*init)(struct device *dev); - void (*cleanup)(struct device *dev); - void (*shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); - - /* Integrating attributes from the omap_hwmod layer */ - u8 controller_flags; - - /* Register offset deviation */ - u16 reg_offset; - - struct omap_mmc_slot_data { - - /* - * 4/8 wires and any additional host capabilities - * need to OR'd all capabilities (ref. linux/mmc/host.h) - */ - u8 wires; /* Used for the MMC driver on omap1 and 2420 */ - u32 caps; /* Used for the MMC driver on 2430 and later */ - u32 pm_caps; /* PM capabilities of the mmc */ - - /* - * nomux means "standard" muxing is wrong on this board, and - * that board-specific code handled it before common init logic. - */ - unsigned nomux:1; - - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - - /* use the internal clock */ - unsigned internal_clock:1; - - /* nonremovable e.g. eMMC */ - unsigned nonremovable:1; - - /* Try to sleep or power off when possible */ - unsigned power_saving:1; - - /* If using power_saving and the MMC power is not to go off */ - unsigned no_off:1; - - /* eMMC does not handle power off when not in sleep state */ - unsigned no_regulator_off_init:1; - - /* Regulator off remapped to sleep */ - unsigned vcc_aux_disable_is_sleep:1; - - /* we can put the features above into this variable */ -#define HSMMC_HAS_PBIAS (1 << 0) -#define HSMMC_HAS_UPDATED_RESET (1 << 1) - unsigned features; - - int switch_pin; /* gpio (card detect) */ - int gpio_wp; /* gpio (write protect) */ - - int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (*set_power)(struct device *dev, int slot, - int power_on, int vdd); - int (*get_ro)(struct device *dev, int slot); - void (*remux)(struct device *dev, int slot, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* if we have special card, init it using this callback */ - void (*init_card)(struct mmc_card *card); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - closed - * 1 - open - */ - int (*get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (*card_detect)(struct device *dev, int slot); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, - int is_closed); - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -#else -static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ -} -#endif - -extern int omap_msdi_reset(struct omap_hwmod *oh); - -#endif diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h deleted file mode 100644 index 324d31b14852..000000000000 --- a/arch/arm/plat-omap/include/plat/multi.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Support for compiling in multiple OMAP processors - * - * Copyright (C) 2010 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __PLAT_OMAP_MULTI_H -#define __PLAT_OMAP_MULTI_H - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2PLUS can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_SOC_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_SOC_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP4 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap4 -# endif -#endif - -#ifdef CONFIG_SOC_OMAP5 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap5 -# endif -#endif - -#ifdef CONFIG_SOC_AM33XX -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME am33xx -# endif -#endif - -#endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h deleted file mode 100644 index 0e4acd2d2deb..000000000000 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __OMAP_SECURE_H__ -#define __OMAP_SECURE_H__ - -#include <linux/types.h> - -extern int omap_secure_ram_reserve_memblock(void); - -#ifdef CONFIG_OMAP4_ERRATA_I688 -extern int omap_barrier_reserve_memblock(void); -#else -static inline void omap_barrier_reserve_memblock(void) -{ } -#endif -#endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1957a8516e93..ff9b0aab5281 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -30,35 +30,6 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MODE13X_SPEED 230400 - -#define OMAP_UART_SCR_TX_EMPTY 0x08 - -/* WER = 0x7F - * Enable module level wakeup in WER reg - */ -#define OMAP_UART_WER_MOD_WKUP 0X7F - -/* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 - -/* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 - -#define OMAP_UART_SYSC_RESET 0X07 -#define OMAP_UART_TCR_TRIG 0X0F -#define OMAP_UART_SW_CLR 0XF0 -#define OMAP_UART_FIFO_CLR 0X06 - -#define OMAP_UART_DMA_CH_FREE -1 - -#define OMAP_MAX_HSUART_PORTS 6 - -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - -#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) -#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) - struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ @@ -77,30 +48,4 @@ struct omap_uart_port_info { void (*enable_wakeup)(struct device *, bool); }; -struct uart_omap_dma { - u8 uart_dma_tx; - u8 uart_dma_rx; - int rx_dma_channel; - int tx_dma_channel; - dma_addr_t rx_buf_dma_phys; - dma_addr_t tx_buf_dma_phys; - unsigned int uart_base; - /* - * Buffer for rx dma.It is not required for tx because the buffer - * comes from port structure. - */ - unsigned char *rx_buf; - unsigned int prev_rx_dma_pos; - int tx_buf_size; - int tx_dma_used; - int rx_dma_used; - spinlock_t tx_lock; - spinlock_t rx_lock; - /* timer to poll activity on rx dma */ - struct timer_list rx_timer; - unsigned int rx_buf_size; - unsigned int rx_poll_rate; - unsigned int rx_timeout; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h deleted file mode 100644 index 267f43bb2a4e..000000000000 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/prcm.h - * - * Access definations for use in OMAP24XX clock and power management - * - * Copyright (C) 2005 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * XXX This file is deprecated. The PRCM is an OMAP2+-only subsystem, - * so this file doesn't belong in plat-omap/include/plat. Please - * do not add anything new to this file. - */ - -#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H -#define __ASM_ARM_ARCH_OMAP_PRCM_H - -u32 omap_prcm_get_reset_sources(void); -int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, - const char *name); - -#endif - - - diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h deleted file mode 100644 index 36d6a7666216..000000000000 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Tony Lindgren - * Paul Walmsley - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_CS_CFG 0x040 -#define SDRC_SHARING 0x044 -#define SDRC_ERR_TYPE 0x04C -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MCFG_0 0x080 -#define SDRC_MR_0 0x084 -#define SDRC_EMR2_0 0x08c -#define SDRC_ACTIM_CTRL_A_0 0x09c -#define SDRC_ACTIM_CTRL_B_0 0x0a0 -#define SDRC_RFR_CTRL_0 0x0a4 -#define SDRC_MANUAL_0 0x0a8 -#define SDRC_MCFG_1 0x0B0 -#define SDRC_MR_1 0x0B4 -#define SDRC_EMR2_1 0x0BC -#define SDRC_ACTIM_CTRL_A_1 0x0C4 -#define SDRC_ACTIM_CTRL_B_1 0x0C8 -#define SDRC_RFR_CTRL_1 0x0D4 -#define SDRC_MANUAL_1 0x0D8 - -#define SDRC_POWER_AUTOCOUNT_SHIFT 8 -#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) -#define SDRC_POWER_CLKCTRL_SHIFT 4 -#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) -#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - -#define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) -#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) -#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) -/* REVISIT: fill in other SMS registers here */ - - -#ifndef __ASSEMBLER__ - -/** - * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate - * @rate: SDRC clock rate (in Hz) - * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate - * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate - * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate - * @mr: Value to program to SDRC_MR for this rate - * - * This structure holds a pre-computed set of register values for the - * SDRC for a given SDRC clock rate and SDRAM chip. These are - * intended to be pre-computed and specified in an array in the board-*.c - * files. The structure is keyed off the 'rate' field. - */ -struct omap_sdrc_params { - unsigned long rate; - u32 actim_ctrla; - u32 actim_ctrlb; - u32 rfr_ctrl; - u32 mr; -}; - -#ifdef CONFIG_SOC_HAS_OMAP2_SDRC -void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); -#else -static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1) {}; -#endif - -int omap2_sdrc_get_params(unsigned long r, - struct omap_sdrc_params **sdrc_cs0, - struct omap_sdrc_params **sdrc_cs1); -void omap2_sms_save_context(void); -void omap2_sms_restore_context(void); - -void omap2_sms_write_rot_control(u32 val, unsigned ctx); -void omap2_sms_write_rot_size(u32 val, unsigned ctx); -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); - -#ifdef CONFIG_ARCH_OMAP2 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); -struct omap_sdrc_params *rx51_get_sdram_timings(void); - -u32 omap2xxx_sdrc_dll_is_unlocked(void); -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); - -#endif /* CONFIG_ARCH_OMAP2 */ - -#endif /* __ASSEMBLER__ */ - -#endif diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 227ae2657554..ba4525059a99 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -1,18 +1,8 @@ -/* - * arch/arm/plat-omap/include/mach/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +int omap_sram_init(void); -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -#ifndef __ASSEMBLY__ -#include <asm/fncpy.h> +void omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached); +void omap_sram_reset(void); extern void *omap_sram_push_address(unsigned long size); @@ -24,82 +14,3 @@ extern void *omap_sram_push_address(unsigned long size); _res = fncpy(_sram_address, &(funcp), size); \ _res; \ }) - -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern void omap3_sram_restore_context(void); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - -#ifdef CONFIG_PM -extern void omap_push_sram_idle(void); -#else -static inline void omap_push_sram_idle(void) {} -#endif /* CONFIG_PM */ - -#endif /* __ASSEMBLY__ */ - -/* - * OMAP2+: define the SRAM PA addresses. - * Used by the SRAM management code and the idle sleep code. - */ -#define OMAP2_SRAM_PA 0x40200000 -#define OMAP3_SRAM_PA 0x40200000 -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PA 0x40304000 -#define OMAP4_SRAM_VA 0xfe404000 -#else -#define OMAP4_SRAM_PA 0x40300000 -#endif -#define AM33XX_SRAM_PA 0x40300000 -#endif diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h deleted file mode 100644 index 7f7b112acccb..000000000000 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Rewritten by: - * Author: <source@mvista.com> - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/memory.h> -#include <asm/mach-types.h> - -#include <plat/serial.h> - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP2UART##p) - -#define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP3UART##p) - -#define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP4UART##p) - -#define DEBUG_LL_OMAP5(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP5UART##p) -/* Zoom2/3 shift is different for UART1 and external port */ -#define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) - -#define DEBUG_LL_TI81XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - TI81XXUART##p) - -#define DEBUG_LL_AM33XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - AM33XXUART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap7xx/8xx based boards using UART1 with shift 0 */ - DEBUG_LL_OMAP7XX(1, herald); - DEBUG_LL_OMAP7XX(1, omap_perseus2); - - /* omap15xx/16xx based boards using UART1 */ - DEBUG_LL_OMAP1(1, ams_delta); - DEBUG_LL_OMAP1(1, nokia770); - DEBUG_LL_OMAP1(1, omap_h2); - DEBUG_LL_OMAP1(1, omap_h3); - DEBUG_LL_OMAP1(1, omap_innovator); - DEBUG_LL_OMAP1(1, omap_osk); - DEBUG_LL_OMAP1(1, omap_palmte); - DEBUG_LL_OMAP1(1, omap_palmz71); - - /* omap15xx/16xx based boards using UART2 */ - DEBUG_LL_OMAP1(2, omap_palmtt); - - /* omap15xx/16xx based boards using UART3 */ - DEBUG_LL_OMAP1(3, sx1); - - /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap_2430sdp); - DEBUG_LL_OMAP2(1, omap_apollon); - DEBUG_LL_OMAP2(1, omap_h4); - - /* omap2 based boards using UART3 */ - DEBUG_LL_OMAP2(3, nokia_n800); - DEBUG_LL_OMAP2(3, nokia_n810); - DEBUG_LL_OMAP2(3, nokia_n810_wimax); - - /* omap3 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap3evm); - DEBUG_LL_OMAP3(1, omap_3430sdp); - DEBUG_LL_OMAP3(1, omap_3630sdp); - DEBUG_LL_OMAP3(1, omap3530_lv_som); - DEBUG_LL_OMAP3(1, omap3_torpedo); - - /* omap3 based boards using UART3 */ - DEBUG_LL_OMAP3(3, cm_t35); - DEBUG_LL_OMAP3(3, cm_t3517); - DEBUG_LL_OMAP3(3, cm_t3730); - DEBUG_LL_OMAP3(3, craneboard); - DEBUG_LL_OMAP3(3, devkit8000); - DEBUG_LL_OMAP3(3, igep0020); - DEBUG_LL_OMAP3(3, igep0030); - DEBUG_LL_OMAP3(3, nokia_rm680); - DEBUG_LL_OMAP3(3, nokia_rm696); - DEBUG_LL_OMAP3(3, nokia_rx51); - DEBUG_LL_OMAP3(3, omap3517evm); - DEBUG_LL_OMAP3(3, omap3_beagle); - DEBUG_LL_OMAP3(3, omap3_pandora); - DEBUG_LL_OMAP3(3, omap_ldp); - DEBUG_LL_OMAP3(3, overo); - DEBUG_LL_OMAP3(3, touchbook); - - /* omap4 based boards using UART3 */ - DEBUG_LL_OMAP4(3, omap_4430sdp); - DEBUG_LL_OMAP4(3, omap4_panda); - - /* omap5 based boards using UART3 */ - DEBUG_LL_OMAP5(3, omap5_sevm); - - /* zoom2/3 external uart */ - DEBUG_LL_ZOOM(omap_zoom2); - DEBUG_LL_ZOOM(omap_zoom3); - - /* TI8168 base boards using UART3 */ - DEBUG_LL_TI81XX(3, ti8168evm); - - /* TI8148 base boards using UART1 */ - DEBUG_LL_TI81XX(1, ti8148evm); - - /* AM33XX base boards using UART1 */ - DEBUG_LL_AM33XX(1, am335xevm); - } while (0); -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h deleted file mode 100644 index 87ee140fefaa..000000000000 --- a/arch/arm/plat-omap/include/plat/usb.h +++ /dev/null @@ -1,179 +0,0 @@ -// include/asm-arm/mach-omap/usb.h - -#ifndef __ASM_ARCH_OMAP_USB_H -#define __ASM_ARCH_OMAP_USB_H - -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/usb/musb.h> - -#define OMAP3_HS_USB_PORTS 3 - -enum usbhs_omap_port_mode { - OMAP_USBHS_PORT_MODE_UNUSED, - OMAP_EHCI_PORT_MODE_PHY, - OMAP_EHCI_PORT_MODE_TLL, - OMAP_EHCI_PORT_MODE_HSIC, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM -}; - -struct usbhs_omap_board_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - /* have to be valid if phy_reset is true and portx is in phy mode */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* Set this to true for ES2.x silicon */ - unsigned es2_compatibility:1; - - unsigned phy_reset:1; - - /* - * Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -struct ehci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - struct regulator *regulator[OMAP3_HS_USB_PORTS]; - unsigned phy_reset:1; -}; - -struct ohci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned es2_compatibility:1; -}; - -struct usbhs_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - struct ehci_hcd_omap_platform_data *ehci_data; - struct ohci_hcd_omap_platform_data *ohci_data; -}; - -struct usbtll_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; -}; -/*-------------------------------------------------------------------------*/ - -struct omap_musb_board_data { - u8 interface_type; - u8 mode; - u16 power; - unsigned extvbus:1; - void (*set_phy_power)(u8 on); - void (*clear_irq)(void); - void (*set_mode)(u8 mode); - void (*reset)(void); -}; - -enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; - -extern void usb_musb_init(struct omap_musb_board_data *board_data); - -extern void usbhs_init(const struct usbhs_omap_board_data *pdata); -extern int omap_tll_enable(void); -extern int omap_tll_disable(void); - -extern int omap4430_phy_power(struct device *dev, int ID, int on); -extern int omap4430_phy_set_clk(struct device *dev, int on); -extern int omap4430_phy_init(struct device *dev); -extern int omap4430_phy_exit(struct device *dev); -extern int omap4430_phy_suspend(struct device *dev, int suspend); - -#endif - -extern void am35x_musb_reset(void); -extern void am35x_musb_phy_power(u8 on); -extern void am35x_musb_clear_irq(void); -extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - -/* AM35x */ -/* USB 2.0 PHY Control */ -#define CONF2_PHY_GPIOMODE (1 << 23) -#define CONF2_OTGMODE (3 << 14) -#define CONF2_NO_OVERRIDE (0 << 14) -#define CONF2_FORCE_HOST (1 << 14) -#define CONF2_FORCE_DEVICE (2 << 14) -#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) -#define CONF2_SESENDEN (1 << 13) -#define CONF2_VBDTCTEN (1 << 12) -#define CONF2_REFFREQ_24MHZ (2 << 8) -#define CONF2_REFFREQ_26MHZ (7 << 8) -#define CONF2_REFFREQ_13MHZ (6 << 8) -#define CONF2_REFFREQ (0xf << 8) -#define CONF2_PHYCLKGD (1 << 7) -#define CONF2_VBUSSENSE (1 << 6) -#define CONF2_PHY_PLLON (1 << 5) -#define CONF2_RESET (1 << 4) -#define CONF2_PHYPWRDN (1 << 3) -#define CONF2_OTGPWRDN (1 << 2) -#define CONF2_DATPOL (1 << 1) - -/* TI81XX specific definitions */ -#define USBCTRL0 0x620 -#define USBSTAT0 0x624 - -/* TI816X PHY controls bits */ -#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) -#define TI816X_USBPHY_REFCLK_OSC (1 << 8) - -/* TI814X PHY controls bits */ -#define USBPHY_CM_PWRDN (1 << 0) -#define USBPHY_OTG_PWRDN (1 << 1) -#define USBPHY_CHGDET_DIS (1 << 2) -#define USBPHY_CHGDET_RSTRT (1 << 3) -#define USBPHY_SRCONDM (1 << 4) -#define USBPHY_SINKONDP (1 << 5) -#define USBPHY_CHGISINK_EN (1 << 6) -#define USBPHY_CHGVSRC_EN (1 << 7) -#define USBPHY_DMPULLUP (1 << 8) -#define USBPHY_DPPULLUP (1 << 9) -#define USBPHY_CDET_EXTCTL (1 << 10) -#define USBPHY_GPIO_MODE (1 << 12) -#define USBPHY_DPOPBUFCTL (1 << 13) -#define USBPHY_DMOPBUFCTL (1 << 14) -#define USBPHY_DPINPUT (1 << 15) -#define USBPHY_DMINPUT (1 << 16) -#define USBPHY_DPGPIO_PD (1 << 17) -#define USBPHY_DMGPIO_PD (1 << 18) -#define USBPHY_OTGVDET_EN (1 << 19) -#define USBPHY_OTGSESSEND_EN (1 << 20) -#define USBPHY_DATA_POLARITY (1 << 23) - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) -u32 omap1_usb0_init(unsigned nwires, unsigned is_device); -u32 omap1_usb1_init(unsigned nwires); -u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); -#else -static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) -{ - return 0; -} -static inline u32 omap1_usb1_init(unsigned nwires) -{ - return 0; - -} -static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h deleted file mode 100644 index 3792bdea2f6d..000000000000 --- a/arch/arm/plat-omap/include/plat/vrfb.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * VRFB Rotation Engine - * - * Copyright (C) 2009 Nokia Corporation - * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAP_VRFB_H__ -#define __OMAP_VRFB_H__ - -#define OMAP_VRFB_LINE_LEN 2048 - -struct vrfb { - u8 context; - void __iomem *vaddr[4]; - unsigned long paddr[4]; - u16 xres; - u16 yres; - u16 xoffset; - u16 yoffset; - u8 bytespp; - bool yuv_mode; -}; - -#ifdef CONFIG_OMAP2_VRFB -extern int omap_vrfb_request_ctx(struct vrfb *vrfb); -extern void omap_vrfb_release_ctx(struct vrfb *vrfb); -extern void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp); -extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); -extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); -extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, - unsigned bytespp, bool yuv_mode); -extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); -extern void omap_vrfb_restore_context(void); - -#else -static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; } -static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {} -static inline void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp) {} -static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp) - { return 0; } -static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp) - { return 0; } -static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, unsigned bytespp, bool yuv_mode) {} -static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot) - { return 0; } -static inline void omap_vrfb_restore_context(void) {} -#endif -#endif /* __VRFB_H */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 28acb383e7df..743fc2836f7a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,198 +20,20 @@ #include <linux/init.h> #include <linux/io.h> +#include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <plat/sram.h> -#include <plat/cpu.h> - -#include "sram.h" - -/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ -#include "../mach-omap2/iomap.h" -#include "../mach-omap2/prm2xxx_3xxx.h" -#include "../mach-omap2/sdrc.h" - -#define OMAP1_SRAM_PA 0x20000000 -#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA -#else -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#endif -#define OMAP5_SRAM_PA 0x40300000 - -#if defined(CONFIG_ARCH_OMAP2PLUS) -#define SRAM_BOOTLOADER_SZ 0x00 -#else -#define SRAM_BOOTLOADER_SZ 0x80 -#endif - -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) - -#define GP_DEVICE 0x300 - #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) -static unsigned long omap_sram_start; static void __iomem *omap_sram_base; static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; /* - * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessible size for all device types is 2k. A GP - * device allows ARM11 but not other initiators for full size. This - * functionality seems ok until some nice security API happens. - */ -static int is_sram_locked(void) -{ - if (OMAP2_DEVICE_TYPE_GP == omap_type()) { - /* RAMFW: R/W access to all initiators for all qualifier sets */ - if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ - } - if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); - } - return 0; - } else - return 1; /* assume locked with no PPA or security driver */ -} - -/* - * The amount of SRAM depends on the core type. - * Note that we cannot try to test for SRAM here because writes - * to secure SRAM will hang the system. Also the SRAM is not - * yet mapped at this point. - */ -static void __init omap_detect_sram(void) -{ - omap_sram_skip = SRAM_BOOTLOADER_SZ; - if (cpu_class_is_omap2()) { - if (is_sram_locked()) { - if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PUB_PA; - if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || - (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { - omap_sram_size = 0x7000; /* 28K */ - omap_sram_skip += SZ_16K; - } else { - omap_sram_size = 0x8000; /* 32K */ - } - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PUB_PA; - omap_sram_size = 0xa000; /* 40K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PUB_PA; - omap_sram_size = 0x800; /* 2K */ - } - } else { - if (soc_is_am33xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0xe000; /* 56K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PA; - if (cpu_is_omap242x()) - omap_sram_size = 0xa0000; /* 640K */ - else if (cpu_is_omap243x()) - omap_sram_size = 0x10000; /* 64K */ - } - } - } else { - omap_sram_start = OMAP1_SRAM_PA; - - if (cpu_is_omap7xx()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) - omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1611() || - cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; /* 16K */ - else { - pr_err("Could not detect SRAM size\n"); - omap_sram_size = 0x4000; - } - } -} - -/* - * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. - */ -static void __init omap_map_sram(void) -{ - int cached = 1; - - if (omap_sram_size == 0) - return; - -#ifdef CONFIG_OMAP4_ERRATA_I688 - if (cpu_is_omap44xx()) { - omap_sram_start += PAGE_SIZE; - omap_sram_size -= SZ_16K; - } -#endif - if (cpu_is_omap34xx()) { - /* - * SRAM must be marked as non-cached on OMAP3 since the - * CORE DPLL M2 divider change code (in SRAM) runs with the - * SDRAM controller disabled, and if it is marked cached, - * the ARM may attempt to write cache lines back to SDRAM - * which will cause the system to hang. - */ - cached = 0; - } - - omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); - omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, - cached); - if (!omap_sram_base) { - pr_err("SRAM: Could not map\n"); - return; - } - - omap_sram_ceil = omap_sram_base + omap_sram_size; - - /* - * Looks like we need to preserve some bootloader code at the - * beginning of SRAM for jumping to flash for reboot to work... - */ - memset_io(omap_sram_base + omap_sram_skip, 0, - omap_sram_size - omap_sram_skip); -} - -/* * Memory allocator for SRAM: calculates the new ceiling address * for pushing a function using the fncpy API. * @@ -236,171 +58,39 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } -#ifdef CONFIG_ARCH_OMAP1 - -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - BUG_ON(!_omap_sram_reprogram_clock); - /* On 730, bit 13 must always be 1 */ - if (cpu_is_omap7xx()) - ckctl |= 0x2000; - _omap_sram_reprogram_clock(dpllctl, ckctl); -} - -static int __init omap1_sram_init(void) -{ - _omap_sram_reprogram_clock = - omap_sram_push(omap1_sram_reprogram_clock, - omap1_sram_reprogram_clock_sz); - - return 0; -} - -#else -#define omap1_sram_init() do {} while (0) -#endif - -#if defined(CONFIG_ARCH_OMAP2) - -static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); - -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ - BUG_ON(!_omap2_sram_ddr_init); - _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, - base_cs, force_unlock); -} - -static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, - u32 mem_type); - -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) -{ - BUG_ON(!_omap2_sram_reprogram_sdrc); - _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); -} - -static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) -{ - BUG_ON(!_omap2_set_prcm); - return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); -} -#endif - -#ifdef CONFIG_SOC_OMAP2420 -static int __init omap242x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, - omap242x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, - omap242x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, - omap242x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap242x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -static int __init omap243x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, - omap243x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, - omap243x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, - omap243x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap243x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 - -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - -void omap3_sram_restore_context(void) +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +void omap_sram_reset(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); } -static inline int omap34xx_sram_init(void) -{ - omap3_sram_restore_context(); - return 0; -} -#else -static inline int omap34xx_sram_init(void) -{ - return 0; -} -#endif /* CONFIG_ARCH_OMAP3 */ - -static inline int am33xx_sram_init(void) +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +void __init omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached) { - return 0; -} + if (size == 0) + return; -int __init omap_sram_init(void) -{ - omap_detect_sram(); - omap_map_sram(); + start = ROUND_DOWN(start, PAGE_SIZE); + omap_sram_size = size; + omap_sram_skip = skip; + omap_sram_base = __arm_ioremap_exec(start, size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } - if (!(cpu_class_is_omap2())) - omap1_sram_init(); - else if (cpu_is_omap242x()) - omap242x_sram_init(); - else if (cpu_is_omap2430()) - omap243x_sram_init(); - else if (soc_is_am33xx()) - am33xx_sram_init(); - else if (cpu_is_omap34xx()) - omap34xx_sram_init(); + omap_sram_reset(); - return 0; + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h deleted file mode 100644 index 29b43ef97f20..000000000000 --- a/arch/arm/plat-omap/sram.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __PLAT_OMAP_SRAM_H__ -#define __PLAT_OMAP_SRAM_H__ - -extern int __init omap_sram_init(void); - -#endif /* __PLAT_OMAP_SRAM_H__ */ diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index af8e484001e5..1fc941944912 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -5,7 +5,6 @@ obj-y := dma.o obj-$(CONFIG_PXA3xx) += mfp.o -obj-$(CONFIG_PXA95x) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 5c79c29f2833..10bc4f3757d1 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t; ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP) +#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) /* * each MFP pin will have a MFPR register, since the offset of the * register varies between processors, the processor specific code @@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val); void mfp_config(unsigned long *mfp_cfgs, int num); void mfp_config_run(void); void mfp_config_lpm(void); -#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */ +#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ #endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index db98e7021f0d..0abd1c469887 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id, pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", chan->number, __func__, buf); - if (chan->end == NULL) + if (chan->end == NULL) { pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", chan->number, __func__, chan); - - chan->end->next = buf; - chan->end = buf; + } else { + chan->end->next = buf; + chan->end = buf; + } } /* if necessary, update the next buffer field */ diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 59401e1cc530..a9d52167e16e 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -414,6 +414,11 @@ config S5P_SETUP_MIPIPHY help Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices +config S3C_SETUP_CAMIF + bool + help + Compile in common setup code for S3C CAMIF devices + # DMA config S3C_DMA @@ -502,5 +507,6 @@ config DEBUG_S3C_UART default "0" if DEBUG_S3C_UART0 default "1" if DEBUG_S3C_UART1 default "2" if DEBUG_S3C_UART2 + default "3" if DEBUG_S3C_UART3 endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 9e40e8d00740..3a7c64d1814a 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o +obj-$(CONFIG_S3C_SETUP_CAMIF) += setup-camif.o obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o # DMA support diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index b1e05ccff3ac..37542c2689a2 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -344,7 +344,7 @@ static int s3c_adc_probe(struct platform_device *pdev) int ret; unsigned tmp; - adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL); + adc = devm_kzalloc(dev, sizeof(struct adc_device), GFP_KERNEL); if (adc == NULL) { dev_err(dev, "failed to allocate adc_device\n"); return -ENOMEM; @@ -355,50 +355,46 @@ static int s3c_adc_probe(struct platform_device *pdev) adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); - adc->vdd = regulator_get(dev, "vdd"); + adc->vdd = devm_regulator_get(dev, "vdd"); if (IS_ERR(adc->vdd)) { dev_err(dev, "operating without regulator \"vdd\" .\n"); - ret = PTR_ERR(adc->vdd); - goto err_alloc; + return PTR_ERR(adc->vdd); } adc->irq = platform_get_irq(pdev, 1); if (adc->irq <= 0) { dev_err(dev, "failed to get adc irq\n"); - ret = -ENOENT; - goto err_reg; + return -ENOENT; } - ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); + ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev), + adc); if (ret < 0) { dev_err(dev, "failed to attach adc irq\n"); - goto err_reg; + return ret; } - adc->clk = clk_get(dev, "adc"); + adc->clk = devm_clk_get(dev, "adc"); if (IS_ERR(adc->clk)) { dev_err(dev, "failed to get adc clock\n"); - ret = PTR_ERR(adc->clk); - goto err_irq; + return PTR_ERR(adc->clk); } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { dev_err(dev, "failed to find registers\n"); - ret = -ENXIO; - goto err_clk; + return -ENXIO; } - adc->regs = ioremap(regs->start, resource_size(regs)); + adc->regs = devm_request_and_ioremap(dev, regs); if (!adc->regs) { dev_err(dev, "failed to map registers\n"); - ret = -ENXIO; - goto err_clk; + return -ENXIO; } ret = regulator_enable(adc->vdd); if (ret) - goto err_ioremap; + return ret; clk_enable(adc->clk); @@ -418,32 +414,14 @@ static int s3c_adc_probe(struct platform_device *pdev) adc_dev = adc; return 0; - - err_ioremap: - iounmap(adc->regs); - err_clk: - clk_put(adc->clk); - - err_irq: - free_irq(adc->irq, adc); - err_reg: - regulator_put(adc->vdd); - err_alloc: - kfree(adc); - return ret; } static int __devexit s3c_adc_remove(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); - iounmap(adc->regs); - free_irq(adc->irq, adc); clk_disable(adc->clk); regulator_disable(adc->vdd); - regulator_put(adc->vdd); - clk_put(adc->clk); - kfree(adc); return 0; } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 03f654d55eff..a17d7b3e3725 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -486,11 +486,7 @@ static struct resource s3c_i2c0_resource[] = { struct platform_device s3c_device_i2c0 = { .name = "s3c2410-i2c", -#ifdef CONFIG_S3C_DEV_I2C1 .id = 0, -#else - .id = -1, -#endif .num_resources = ARRAY_SIZE(s3c_i2c0_resource), .resource = s3c_i2c0_resource, }; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index ace4451b7651..e0072ce8d6e9 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -43,6 +43,7 @@ extern unsigned long samsung_cpu_id; #define EXYNOS4_CPU_MASK 0xFFFE0000 #define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5440_SOC_ID 0x54400000 #define EXYNOS5_SOC_MASK 0xFFFFF000 #define IS_SAMSUNG_CPU(name, id, mask) \ @@ -62,6 +63,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ @@ -130,6 +132,12 @@ IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos5250() 0 #endif +#if defined(CONFIG_SOC_EXYNOS5440) +# define soc_is_exynos5440() is_samsung_exynos5440() +#else +# define soc_is_exynos5440() 0 +#endif + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef KHZ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 5da4b4f38f40..a9b8096b8252 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -123,7 +123,6 @@ extern struct platform_device s5pv210_device_spdif; extern struct platform_device exynos4_device_ac97; extern struct platform_device exynos4_device_ahci; -extern struct platform_device exynos4_device_dwmci; extern struct platform_device exynos4_device_i2s0; extern struct platform_device exynos4_device_i2s1; extern struct platform_device exynos4_device_i2s2; diff --git a/arch/arm/plat-samsung/setup-camif.c b/arch/arm/plat-samsung/setup-camif.c new file mode 100644 index 000000000000..e01bf760af2c --- /dev/null +++ b/arch/arm/plat-samsung/setup-camif.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com> + * + * Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +/* Number of camera port pins, without FIELD */ +#define S3C_CAMIF_NUM_GPIOS 13 + +/* Default camera port configuration helpers. */ + +static void camif_get_gpios(int *gpio_start, int *gpio_reset) +{ +#ifdef CONFIG_ARCH_S3C24XX + *gpio_start = S3C2410_GPJ(0); + *gpio_reset = S3C2410_GPJ(12); +#else + /* s3c64xx */ + *gpio_start = S3C64XX_GPF(0); + *gpio_reset = S3C64XX_GPF(3); +#endif +} + +int s3c_camif_gpio_get(void) +{ + int gpio_start, gpio_reset; + int ret, i; + + camif_get_gpios(&gpio_start, &gpio_reset); + + for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) { + int gpio = gpio_start + i; + + if (gpio == gpio_reset) + continue; + + ret = gpio_request(gpio, "camif"); + if (!ret) + ret = s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + if (ret) { + pr_err("failed to configure GPIO %d\n", gpio); + for (--i; i >= 0; i--) + gpio_free(gpio--); + return ret; + } + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + return 0; +} + +void s3c_camif_gpio_put(void) +{ + int i, gpio_start, gpio_reset; + + camif_get_gpios(&gpio_start, &gpio_reset); + + for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) { + int gpio = gpio_start + i; + if (gpio != gpio_reset) + gpio_free(gpio); + } +} diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index f8db7b2deb36..87dbd81bdf51 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -12,6 +12,7 @@ config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" select ARM_GIC select CPU_V7 + select GPIO_SPEAR_SPICS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 2a4ae8a6a081..2c4332b9f948 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -6,20 +6,11 @@ config PLAT_VERSATILE_CLOCK config PLAT_VERSATILE_CLCD bool -config PLAT_VERSATILE_FPGA_IRQ - bool - select IRQ_DOMAIN - -config PLAT_VERSATILE_FPGA_IRQ_NR - int - default 4 - depends on PLAT_VERSATILE_FPGA_IRQ - config PLAT_VERSATILE_LEDS def_bool y if NEW_LEDS depends on ARCH_REALVIEW || ARCH_VERSATILE select LEDS_CLASS - select LEDS_TRIGGER + select LEDS_TRIGGERS config PLAT_VERSATILE_SCHED_CLOCK def_bool y diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 74cfd94cbf80..f88d448b629c 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -2,7 +2,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o -obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c deleted file mode 100644 index 091ae1030045..000000000000 --- a/arch/arm/plat-versatile/fpga-irq.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Support for Versatile FPGA-based IRQ controllers - */ -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/irqdomain.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include <asm/exception.h> -#include <asm/mach/irq.h> -#include <plat/fpga-irq.h> - -#define IRQ_STATUS 0x00 -#define IRQ_RAW_STATUS 0x04 -#define IRQ_ENABLE_SET 0x08 -#define IRQ_ENABLE_CLEAR 0x0c -#define INT_SOFT_SET 0x10 -#define INT_SOFT_CLEAR 0x14 -#define FIQ_STATUS 0x20 -#define FIQ_RAW_STATUS 0x24 -#define FIQ_ENABLE 0x28 -#define FIQ_ENABLE_SET 0x28 -#define FIQ_ENABLE_CLEAR 0x2C - -/** - * struct fpga_irq_data - irq data container for the FPGA IRQ controller - * @base: memory offset in virtual memory - * @chip: chip container for this instance - * @domain: IRQ domain for this instance - * @valid: mask for valid IRQs on this controller - * @used_irqs: number of active IRQs on this controller - */ -struct fpga_irq_data { - void __iomem *base; - struct irq_chip chip; - u32 valid; - struct irq_domain *domain; - u8 used_irqs; -}; - -/* we cannot allocate memory when the controllers are initially registered */ -static struct fpga_irq_data fpga_irq_devices[CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR]; -static int fpga_irq_id; - -static void fpga_irq_mask(struct irq_data *d) -{ - struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); - u32 mask = 1 << d->hwirq; - - writel(mask, f->base + IRQ_ENABLE_CLEAR); -} - -static void fpga_irq_unmask(struct irq_data *d) -{ - struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); - u32 mask = 1 << d->hwirq; - - writel(mask, f->base + IRQ_ENABLE_SET); -} - -static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) -{ - struct fpga_irq_data *f = irq_desc_get_handler_data(desc); - u32 status = readl(f->base + IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - generic_handle_irq(irq_find_mapping(f->domain, irq)); - } while (status); -} - -/* - * Handle each interrupt in a single FPGA IRQ controller. Returns non-zero - * if we've handled at least one interrupt. This does a single read of the - * status register and handles all interrupts in order from LSB first. - */ -static int handle_one_fpga(struct fpga_irq_data *f, struct pt_regs *regs) -{ - int handled = 0; - int irq; - u32 status; - - while ((status = readl(f->base + IRQ_STATUS))) { - irq = ffs(status) - 1; - handle_IRQ(irq_find_mapping(f->domain, irq), regs); - handled = 1; - } - - return handled; -} - -/* - * Keep iterating over all registered FPGA IRQ controllers until there are - * no pending interrupts. - */ -asmlinkage void __exception_irq_entry fpga_handle_irq(struct pt_regs *regs) -{ - int i, handled; - - do { - for (i = 0, handled = 0; i < fpga_irq_id; ++i) - handled |= handle_one_fpga(&fpga_irq_devices[i], regs); - } while (handled); -} - -static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hwirq) -{ - struct fpga_irq_data *f = d->host_data; - - /* Skip invalid IRQs, only register handlers for the real ones */ - if (!(f->valid & (1 << hwirq))) - return -ENOTSUPP; - irq_set_chip_data(irq, f); - irq_set_chip_and_handler(irq, &f->chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - f->used_irqs++; - return 0; -} - -static struct irq_domain_ops fpga_irqdomain_ops = { - .map = fpga_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -static __init struct fpga_irq_data * -fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) { - struct fpga_irq_data *f; - - if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) { - printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); - return NULL; - } - f = &fpga_irq_devices[fpga_irq_id]; - f->base = base; - f->chip.name = name; - f->chip.irq_ack = fpga_irq_mask; - f->chip.irq_mask = fpga_irq_mask; - f->chip.irq_unmask = fpga_irq_unmask; - f->valid = valid; - fpga_irq_id++; - - return f; -} - -void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, - int parent_irq, u32 valid, struct device_node *node) -{ - struct fpga_irq_data *f; - - f = fpga_irq_prep_struct(base, name, valid); - if (!f) - return; - - if (parent_irq != -1) { - irq_set_handler_data(parent_irq, f); - irq_set_chained_handler(parent_irq, fpga_irq_handle); - } - - f->domain = irq_domain_add_legacy(node, fls(valid), irq_start, 0, - &fpga_irqdomain_ops, f); - pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", - fpga_irq_id, name, base, f->used_irqs); -} - -#ifdef CONFIG_OF -int __init fpga_irq_of_init(struct device_node *node, - struct device_node *parent) -{ - struct fpga_irq_data *f; - void __iomem *base; - u32 clear_mask; - u32 valid_mask; - - if (WARN_ON(!node)) - return -ENODEV; - - base = of_iomap(node, 0); - WARN(!base, "unable to map fpga irq registers\n"); - - if (of_property_read_u32(node, "clear-mask", &clear_mask)) - clear_mask = 0; - - if (of_property_read_u32(node, "valid-mask", &valid_mask)) - valid_mask = 0; - - f = fpga_irq_prep_struct(base, node->name, valid_mask); - if (!f) - return -ENOMEM; - - writel(clear_mask, base + IRQ_ENABLE_CLEAR); - writel(clear_mask, base + FIQ_ENABLE_CLEAR); - - f->domain = irq_domain_add_linear(node, fls(valid_mask), &fpga_irqdomain_ops, f); - f->used_irqs = hweight32(valid_mask); - - pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", - fpga_irq_id, node->name, base, f->used_irqs); - return 0; -} -#endif diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h deleted file mode 100644 index 1fac9651d3ca..000000000000 --- a/arch/arm/plat-versatile/include/plat/fpga-irq.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef PLAT_FPGA_IRQ_H -#define PLAT_FPGA_IRQ_H - -struct device_node; -struct pt_regs; - -void fpga_handle_irq(struct pt_regs *regs); -void fpga_irq_init(void __iomem *, const char *, int, int, u32, - struct device_node *node); -int fpga_irq_of_init(struct device_node *node, - struct device_node *parent); - -#endif diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 4b03c56ec329..f9ccff915918 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -2,6 +2,7 @@ config ARM64 def_bool y select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_WANT_COMPAT_IPC_PARSE_VERSION + select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_HARDIRQS_NO_DEPRECATED select GENERIC_IOMAP @@ -23,7 +24,6 @@ config ARM64 select HAVE_IRQ_WORK select HAVE_MEMBLOCK select HAVE_PERF_EVENTS - select HAVE_SPARSE_IRQ select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 364191f3be43..c95c5cb212fd 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -41,20 +41,24 @@ libs-y := arch/arm64/lib/ $(libs-y) libs-y += $(LIBGCC) # Default target when executing plain make -KBUILD_IMAGE := Image.gz +KBUILD_IMAGE := Image.gz +KBUILD_DTBS := dtbs -all: $(KBUILD_IMAGE) +all: $(KBUILD_IMAGE) $(KBUILD_DTBS) boot := arch/arm64/boot Image Image.gz: vmlinux - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ zinstall install: vmlinux - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ + $(Q)$(MAKE) $(build)=$(boot) $@ -%.dtb: - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ +%.dtb: scripts + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ + +dtbs: scripts + $(Q)$(MAKE) $(build)=$(boot)/dts dtbs # We use MRPROPER_FILES and CLEAN_FILES now archclean: @@ -63,6 +67,7 @@ archclean: define archhelp echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)' echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' + echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' Install using (your) ~/bin/installkernel or' diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile index eca209b2b0bf..5a0e3ab854a5 100644 --- a/arch/arm64/boot/Makefile +++ b/arch/arm64/boot/Makefile @@ -22,9 +22,6 @@ $(obj)/Image: vmlinux FORCE $(obj)/Image.gz: $(obj)/Image FORCE $(call if_changed,gzip) -$(obj)/%.dtb: $(src)/dts/%.dts - $(call cmd,dtc) - install: $(obj)/Image $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)" @@ -32,5 +29,3 @@ install: $(obj)/Image zinstall: $(obj)/Image.gz $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image.gz System.map "$(INSTALL_PATH)" - -clean-files += *.dtb diff --git a/arch/arm64/boot/dts/.gitignore b/arch/arm64/boot/dts/.gitignore new file mode 100644 index 000000000000..b60ed208c779 --- /dev/null +++ b/arch/arm64/boot/dts/.gitignore @@ -0,0 +1 @@ +*.dtb diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile new file mode 100644 index 000000000000..801e2d7fcbc6 --- /dev/null +++ b/arch/arm64/boot/dts/Makefile @@ -0,0 +1,5 @@ +targets += dtbs + +dtbs: $(addprefix $(obj)/, $(dtb-y)) + +clean-files := *.dtb diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index a581a2205938..14a9d5a2b85b 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -3,6 +3,7 @@ generic-y += bug.h generic-y += bugs.h generic-y += checksum.h +generic-y += clkdev.h generic-y += cputime.h generic-y += current.h generic-y += delay.h @@ -43,6 +44,7 @@ generic-y += swab.h generic-y += termbits.h generic-y += termios.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += unaligned.h generic-y += user.h diff --git a/arch/arm64/include/asm/arm_generic.h b/arch/arm64/include/asm/arm_generic.h index e4cec9d30f27..df2aeb82f74e 100644 --- a/arch/arm64/include/asm/arm_generic.h +++ b/arch/arm64/include/asm/arm_generic.h @@ -70,12 +70,12 @@ static inline void __cpuinit arch_counter_enable_user_access(void) { u32 cntkctl; - /* Disable user access to the timers and the virtual counter. */ + /* Disable user access to the timers and the physical counter. */ asm volatile("mrs %0, cntkctl_el1" : "=r" (cntkctl)); - cntkctl &= ~((3 << 8) | (1 << 1)); + cntkctl &= ~((3 << 8) | (1 << 0)); - /* Enable user access to the physical counter and frequency. */ - cntkctl |= 1; + /* Enable user access to the virtual counter and frequency. */ + cntkctl |= (1 << 1); asm volatile("msr cntkctl_el1, %0" : : "r" (cntkctl)); } diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index da2a13e8f1e6..c8eedc604984 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -107,3 +107,11 @@ * Register aliases. */ lr .req x30 // link register + +/* + * Vector entry + */ + .macro ventry label + .align 7 + b \label + .endm diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index aa3132ab7f29..3300cbd18a89 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -70,13 +70,20 @@ * - size - region size */ extern void flush_cache_all(void); -extern void flush_cache_mm(struct mm_struct *mm); extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); -extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn); extern void flush_icache_range(unsigned long start, unsigned long end); extern void __flush_dcache_area(void *addr, size_t len); extern void __flush_cache_user_range(unsigned long start, unsigned long end); +static inline void flush_cache_mm(struct mm_struct *mm) +{ +} + +static inline void flush_cache_page(struct vm_area_struct *vma, + unsigned long user_addr, unsigned long pfn) +{ +} + /* * Copy user data from/to a page which is mapped into a different * processes address space. Really, we want to allow our "user diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h new file mode 100644 index 000000000000..bbec599c96bd --- /dev/null +++ b/arch/arm64/include/asm/fpsimdmacros.h @@ -0,0 +1,64 @@ +/* + * FP/SIMD state saving and restoring macros + * + * Copyright (C) 2012 ARM Ltd. + * Author: Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +.macro fpsimd_save state, tmpnr + stp q0, q1, [\state, #16 * 0] + stp q2, q3, [\state, #16 * 2] + stp q4, q5, [\state, #16 * 4] + stp q6, q7, [\state, #16 * 6] + stp q8, q9, [\state, #16 * 8] + stp q10, q11, [\state, #16 * 10] + stp q12, q13, [\state, #16 * 12] + stp q14, q15, [\state, #16 * 14] + stp q16, q17, [\state, #16 * 16] + stp q18, q19, [\state, #16 * 18] + stp q20, q21, [\state, #16 * 20] + stp q22, q23, [\state, #16 * 22] + stp q24, q25, [\state, #16 * 24] + stp q26, q27, [\state, #16 * 26] + stp q28, q29, [\state, #16 * 28] + stp q30, q31, [\state, #16 * 30]! + mrs x\tmpnr, fpsr + str w\tmpnr, [\state, #16 * 2] + mrs x\tmpnr, fpcr + str w\tmpnr, [\state, #16 * 2 + 4] +.endm + +.macro fpsimd_restore state, tmpnr + ldp q0, q1, [\state, #16 * 0] + ldp q2, q3, [\state, #16 * 2] + ldp q4, q5, [\state, #16 * 4] + ldp q6, q7, [\state, #16 * 6] + ldp q8, q9, [\state, #16 * 8] + ldp q10, q11, [\state, #16 * 10] + ldp q12, q13, [\state, #16 * 12] + ldp q14, q15, [\state, #16 * 14] + ldp q16, q17, [\state, #16 * 16] + ldp q18, q19, [\state, #16 * 18] + ldp q20, q21, [\state, #16 * 20] + ldp q22, q23, [\state, #16 * 22] + ldp q24, q25, [\state, #16 * 24] + ldp q26, q27, [\state, #16 * 26] + ldp q28, q29, [\state, #16 * 28] + ldp q30, q31, [\state, #16 * 30]! + ldr w\tmpnr, [\state, #16 * 2] + msr fpsr, x\tmpnr + ldr w\tmpnr, [\state, #16 * 2 + 4] + msr fpcr, x\tmpnr +.endm diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 14aba2db6776..64b133949502 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -159,6 +159,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, { if (pte_present_exec_user(pte)) __sync_icache_dcache(pte, addr); + if (!pte_dirty(pte)) + pte = pte_wrprotect(pte); set_pte(ptep, pte); } diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index b04d3404f0d1..4ce845f8ee1c 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -30,7 +30,17 @@ #define COMPAT_PTRACE_SETVFPREGS 28 #define COMPAT_PTRACE_GETHBPREGS 29 #define COMPAT_PTRACE_SETHBPREGS 30 + +/* AArch32 CPSR bits */ +#define COMPAT_PSR_MODE_MASK 0x0000001f #define COMPAT_PSR_MODE_USR 0x00000010 +#define COMPAT_PSR_MODE_FIQ 0x00000011 +#define COMPAT_PSR_MODE_IRQ 0x00000012 +#define COMPAT_PSR_MODE_SVC 0x00000013 +#define COMPAT_PSR_MODE_ABT 0x00000017 +#define COMPAT_PSR_MODE_HYP 0x0000001a +#define COMPAT_PSR_MODE_UND 0x0000001b +#define COMPAT_PSR_MODE_SYS 0x0000001f #define COMPAT_PSR_T_BIT 0x00000020 #define COMPAT_PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */ /* @@ -44,10 +54,27 @@ /* sizeof(struct user) for AArch32 */ #define COMPAT_USER_SZ 296 -/* AArch32 uses x13 as the stack pointer... */ + +/* Architecturally defined mapping between AArch32 and AArch64 registers */ +#define compat_usr(x) regs[(x)] #define compat_sp regs[13] -/* ... and x14 as the link register. */ #define compat_lr regs[14] +#define compat_sp_hyp regs[15] +#define compat_sp_irq regs[16] +#define compat_lr_irq regs[17] +#define compat_sp_svc regs[18] +#define compat_lr_svc regs[19] +#define compat_sp_abt regs[20] +#define compat_lr_abt regs[21] +#define compat_sp_und regs[22] +#define compat_lr_und regs[23] +#define compat_r8_fiq regs[24] +#define compat_r9_fiq regs[25] +#define compat_r10_fiq regs[26] +#define compat_r11_fiq regs[27] +#define compat_r12_fiq regs[28] +#define compat_sp_fiq regs[29] +#define compat_lr_fiq regs[30] /* * This struct defines the way the registers are stored on the stack during an diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 30127cb11ade..58432625fdb3 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -392,8 +392,8 @@ __SYSCALL(367, sys_fanotify_init) __SYSCALL(368, compat_sys_fanotify_mark_wrapper) __SYSCALL(369, sys_prlimit64) __SYSCALL(370, sys_name_to_handle_at) -__SYSCALL(371, sys_open_by_handle_at) -__SYSCALL(372, sys_clock_adjtime) +__SYSCALL(371, compat_sys_open_by_handle_at) +__SYSCALL(372, compat_sys_clock_adjtime) __SYSCALL(373, sys_syncfs) #define __NR_compat_syscalls 374 diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h new file mode 100644 index 000000000000..439827271e3d --- /dev/null +++ b/arch/arm64/include/asm/virt.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ASM__VIRT_H +#define __ASM__VIRT_H + +#define BOOT_CPU_MODE_EL2 (0x0e12b007) + +#ifndef __ASSEMBLY__ + +/* + * __boot_cpu_mode records what mode CPUs were booted in. + * A correctly-implemented bootloader must start all CPUs in the same mode: + * In this case, both 32bit halves of __boot_cpu_mode will contain the + * same value (either 0 if booted in EL1, BOOT_CPU_MODE_EL2 if booted in EL2). + * + * Should the bootloader fail to do this, the two values will be different. + * This allows the kernel to flag an error when the secondaries have come up. + */ +extern u32 __boot_cpu_mode[2]; + +void __hyp_set_vectors(phys_addr_t phys_vector_base); +phys_addr_t __hyp_get_vectors(void); + +/* Reports the availability of HYP mode */ +static inline bool is_hyp_mode_available(void) +{ + return (__boot_cpu_mode[0] == BOOT_CPU_MODE_EL2 && + __boot_cpu_mode[1] == BOOT_CPU_MODE_EL2); +} + +/* Check if the bootloader has booted CPUs in different modes */ +static inline bool is_hyp_mode_mismatched(void) +{ + return __boot_cpu_mode[0] != __boot_cpu_mode[1]; +} + +#endif /* __ASSEMBLY__ */ + +#endif /* ! __ASM__VIRT_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index e2caff1b812a..74239c31e25a 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -8,7 +8,8 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) # Object file lists. arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \ entry-fpsimd.o process.o ptrace.o setup.o signal.o \ - sys.o stacktrace.o time.o traps.o io.o vdso.o + sys.o stacktrace.o time.o traps.o io.o vdso.o \ + hyp-stub.o arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S index 17988a6e7ea2..6a27cd6dbfa6 100644 --- a/arch/arm64/kernel/entry-fpsimd.S +++ b/arch/arm64/kernel/entry-fpsimd.S @@ -20,6 +20,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/fpsimdmacros.h> /* * Save the FP registers. @@ -27,26 +28,7 @@ * x0 - pointer to struct fpsimd_state */ ENTRY(fpsimd_save_state) - stp q0, q1, [x0, #16 * 0] - stp q2, q3, [x0, #16 * 2] - stp q4, q5, [x0, #16 * 4] - stp q6, q7, [x0, #16 * 6] - stp q8, q9, [x0, #16 * 8] - stp q10, q11, [x0, #16 * 10] - stp q12, q13, [x0, #16 * 12] - stp q14, q15, [x0, #16 * 14] - stp q16, q17, [x0, #16 * 16] - stp q18, q19, [x0, #16 * 18] - stp q20, q21, [x0, #16 * 20] - stp q22, q23, [x0, #16 * 22] - stp q24, q25, [x0, #16 * 24] - stp q26, q27, [x0, #16 * 26] - stp q28, q29, [x0, #16 * 28] - stp q30, q31, [x0, #16 * 30]! - mrs x8, fpsr - str w8, [x0, #16 * 2] - mrs x8, fpcr - str w8, [x0, #16 * 2 + 4] + fpsimd_save x0, 8 ret ENDPROC(fpsimd_save_state) @@ -56,25 +38,6 @@ ENDPROC(fpsimd_save_state) * x0 - pointer to struct fpsimd_state */ ENTRY(fpsimd_load_state) - ldp q0, q1, [x0, #16 * 0] - ldp q2, q3, [x0, #16 * 2] - ldp q4, q5, [x0, #16 * 4] - ldp q6, q7, [x0, #16 * 6] - ldp q8, q9, [x0, #16 * 8] - ldp q10, q11, [x0, #16 * 10] - ldp q12, q13, [x0, #16 * 12] - ldp q14, q15, [x0, #16 * 14] - ldp q16, q17, [x0, #16 * 16] - ldp q18, q19, [x0, #16 * 18] - ldp q20, q21, [x0, #16 * 20] - ldp q22, q23, [x0, #16 * 22] - ldp q24, q25, [x0, #16 * 24] - ldp q26, q27, [x0, #16 * 26] - ldp q28, q29, [x0, #16 * 28] - ldp q30, q31, [x0, #16 * 30]! - ldr w8, [x0, #16 * 2] - ldr w9, [x0, #16 * 2 + 4] - msr fpsr, x8 - msr fpcr, x9 + fpsimd_restore x0, 8 ret ENDPROC(fpsimd_load_state) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index cbfa4d28100e..9c94f404ded6 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -148,10 +148,6 @@ tsk .req x28 // current thread_info /* * Exception vectors. */ - .macro ventry label - .align 7 - b \label - .endm .align 11 ENTRY(vectors) diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index a2f02b63eae9..368ad1f7c36c 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -31,6 +31,7 @@ #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/page.h> +#include <asm/virt.h> /* * swapper_pg_dir is the virtual address of the initial page table. We place @@ -115,13 +116,13 @@ ENTRY(stext) mov x21, x0 // x21=FDT + bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET bl el2_setup // Drop to EL1 mrs x22, midr_el1 // x22=cpuid mov x0, x22 bl lookup_processor_type mov x23, x0 // x23=current cpu_table cbz x23, __error_p // invalid processor (x23=0)? - bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET bl __vet_fdt bl __create_page_tables // x25=TTBR0, x26=TTBR1 /* @@ -147,17 +148,23 @@ ENTRY(el2_setup) mrs x0, CurrentEL cmp x0, #PSR_MODE_EL2t ccmp x0, #PSR_MODE_EL2h, #0x4, ne + ldr x0, =__boot_cpu_mode // Compute __boot_cpu_mode + add x0, x0, x28 b.eq 1f + str wzr, [x0] // Remember we don't have EL2... ret /* Hyp configuration. */ -1: mov x0, #(1 << 31) // 64-bit EL1 +1: ldr w1, =BOOT_CPU_MODE_EL2 + str w1, [x0, #4] // This CPU has EL2 + mov x0, #(1 << 31) // 64-bit EL1 msr hcr_el2, x0 /* Generic timers. */ mrs x0, cnthctl_el2 orr x0, x0, #3 // Enable EL1 physical timers msr cnthctl_el2, x0 + msr cntvoff_el2, xzr // Clear virtual offset /* Populate ID registers. */ mrs x0, midr_el1 @@ -178,6 +185,13 @@ ENTRY(el2_setup) msr hstr_el2, xzr // Disable CP15 traps to EL2 #endif + /* Stage-2 translation */ + msr vttbr_el2, xzr + + /* Hypervisor stub */ + adr x0, __hyp_stub_vectors + msr vbar_el2, x0 + /* spsr */ mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\ PSR_MODE_EL1h) @@ -186,6 +200,19 @@ ENTRY(el2_setup) eret ENDPROC(el2_setup) +/* + * We need to find out the CPU boot mode long after boot, so we need to + * store it in a writable variable. + * + * This is not in .bss, because we set it sufficiently early that the boot-time + * zeroing of .bss would clobber it. + */ + .pushsection .data +ENTRY(__boot_cpu_mode) + .long BOOT_CPU_MODE_EL2 + .long 0 + .popsection + .align 3 2: .quad . .quad PAGE_OFFSET @@ -201,6 +228,7 @@ ENDPROC(el2_setup) * cores are held until we're ready for them to initialise. */ ENTRY(secondary_holding_pen) + bl __calc_phys_offset // x24=phys offset bl el2_setup // Drop to EL1 mrs x0, mpidr_el1 and x0, x0, #15 // CPU number @@ -226,7 +254,6 @@ ENTRY(secondary_startup) mov x23, x0 // x23=current cpu_table cbz x23, __error_p // invalid processor (x23=0)? - bl __calc_phys_offset // x24=phys offset pgtbl x25, x26, x24 // x25=TTBR0, x26=TTBR1 ldr x12, [x23, #CPU_INFO_SETUP] add x12, x12, x28 // __virt_to_phys diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S new file mode 100644 index 000000000000..0959611d9ff1 --- /dev/null +++ b/arch/arm64/kernel/hyp-stub.S @@ -0,0 +1,109 @@ +/* + * Hypervisor stub + * + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/linkage.h> + +#include <asm/assembler.h> +#include <asm/ptrace.h> +#include <asm/virt.h> + + .text + .align 11 + +ENTRY(__hyp_stub_vectors) + ventry el2_sync_invalid // Synchronous EL2t + ventry el2_irq_invalid // IRQ EL2t + ventry el2_fiq_invalid // FIQ EL2t + ventry el2_error_invalid // Error EL2t + + ventry el2_sync_invalid // Synchronous EL2h + ventry el2_irq_invalid // IRQ EL2h + ventry el2_fiq_invalid // FIQ EL2h + ventry el2_error_invalid // Error EL2h + + ventry el1_sync // Synchronous 64-bit EL1 + ventry el1_irq_invalid // IRQ 64-bit EL1 + ventry el1_fiq_invalid // FIQ 64-bit EL1 + ventry el1_error_invalid // Error 64-bit EL1 + + ventry el1_sync_invalid // Synchronous 32-bit EL1 + ventry el1_irq_invalid // IRQ 32-bit EL1 + ventry el1_fiq_invalid // FIQ 32-bit EL1 + ventry el1_error_invalid // Error 32-bit EL1 +ENDPROC(__hyp_stub_vectors) + + .align 11 + +el1_sync: + mrs x1, esr_el2 + lsr x1, x1, #26 + cmp x1, #0x16 + b.ne 2f // Not an HVC trap + cbz x0, 1f + msr vbar_el2, x0 // Set vbar_el2 + b 2f +1: mrs x0, vbar_el2 // Return vbar_el2 +2: eret +ENDPROC(el1_sync) + +.macro invalid_vector label +\label: + b \label +ENDPROC(\label) +.endm + + invalid_vector el2_sync_invalid + invalid_vector el2_irq_invalid + invalid_vector el2_fiq_invalid + invalid_vector el2_error_invalid + invalid_vector el1_sync_invalid + invalid_vector el1_irq_invalid + invalid_vector el1_fiq_invalid + invalid_vector el1_error_invalid + +/* + * __hyp_set_vectors: Call this after boot to set the initial hypervisor + * vectors as part of hypervisor installation. On an SMP system, this should + * be called on each CPU. + * + * x0 must be the physical address of the new vector table, and must be + * 2KB aligned. + * + * Before calling this, you must check that the stub hypervisor is installed + * everywhere, by waiting for any secondary CPUs to be brought up and then + * checking that is_hyp_mode_available() is true. + * + * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or + * something else went wrong... in such cases, trying to install a new + * hypervisor is unlikely to work as desired. + * + * When you call into your shiny new hypervisor, sp_el2 will contain junk, + * so you will need to set that to something sensible at the new hypervisor's + * initialisation entry point. + */ + +ENTRY(__hyp_get_vectors) + mov x0, xzr + // fall through +ENTRY(__hyp_set_vectors) + hvc #0 + ret +ENDPROC(__hyp_get_vectors) +ENDPROC(__hyp_set_vectors) diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 8807ba2cf262..abd756315cb5 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -41,6 +41,8 @@ struct rt_sigframe { struct siginfo info; struct ucontext uc; + u64 fp; + u64 lr; }; static int preserve_fpsimd_context(struct fpsimd_context __user *ctx) @@ -175,6 +177,10 @@ static int setup_sigframe(struct rt_sigframe __user *sf, struct aux_context __user *aux = (struct aux_context __user *)sf->uc.uc_mcontext.__reserved; + /* set up the stack frame for unwinding */ + __put_user_error(regs->regs[29], &sf->fp, err); + __put_user_error(regs->regs[30], &sf->lr, err); + for (i = 0; i < 31; i++) __put_user_error(regs->regs[i], &sf->uc.uc_mcontext.regs[i], err); @@ -196,11 +202,11 @@ static int setup_sigframe(struct rt_sigframe __user *sf, return err; } -static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, - int framesize) +static struct rt_sigframe __user *get_sigframe(struct k_sigaction *ka, + struct pt_regs *regs) { unsigned long sp, sp_top; - void __user *frame; + struct rt_sigframe __user *frame; sp = sp_top = regs->sp; @@ -210,11 +216,8 @@ static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp)) sp = sp_top = current->sas_ss_sp + current->sas_ss_size; - /* room for stack frame (FP, LR) */ - sp -= 16; - - sp = (sp - framesize) & ~15; - frame = (void __user *)sp; + sp = (sp - sizeof(struct rt_sigframe)) & ~15; + frame = (struct rt_sigframe __user *)sp; /* * Check that we can actually write to the signal frame. @@ -225,20 +228,14 @@ static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, return frame; } -static int setup_return(struct pt_regs *regs, struct k_sigaction *ka, - void __user *frame, int usig) +static void setup_return(struct pt_regs *regs, struct k_sigaction *ka, + void __user *frame, int usig) { - int err = 0; __sigrestore_t sigtramp; - unsigned long __user *sp = (unsigned long __user *)regs->sp; - - /* set up the stack frame */ - __put_user_error(regs->regs[29], sp - 2, err); - __put_user_error(regs->regs[30], sp - 1, err); regs->regs[0] = usig; - regs->regs[29] = regs->sp - 16; regs->sp = (unsigned long)frame; + regs->regs[29] = regs->sp + offsetof(struct rt_sigframe, fp); regs->pc = (unsigned long)ka->sa.sa_handler; if (ka->sa.sa_flags & SA_RESTORER) @@ -247,8 +244,6 @@ static int setup_return(struct pt_regs *regs, struct k_sigaction *ka, sigtramp = VDSO_SYMBOL(current->mm->context.vdso, sigtramp); regs->regs[30] = (unsigned long)sigtramp; - - return err; } static int setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, @@ -258,7 +253,7 @@ static int setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, stack_t stack; int err = 0; - frame = get_sigframe(ka, regs, sizeof(*frame)); + frame = get_sigframe(ka, regs); if (!frame) return 1; @@ -272,13 +267,13 @@ static int setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, err |= __copy_to_user(&frame->uc.uc_stack, &stack, sizeof(stack)); err |= setup_sigframe(frame, regs, set); - if (err == 0) - err = setup_return(regs, ka, frame, usig); - - if (err == 0 && ka->sa.sa_flags & SA_SIGINFO) { - err |= copy_siginfo_to_user(&frame->info, info); - regs->regs[1] = (unsigned long)&frame->info; - regs->regs[2] = (unsigned long)&frame->uc; + if (err == 0) { + setup_return(regs, ka, frame, usig); + if (ka->sa.sa_flags & SA_SIGINFO) { + err |= copy_siginfo_to_user(&frame->info, info); + regs->regs[1] = (unsigned long)&frame->info; + regs->regs[2] = (unsigned long)&frame->uc; + } } return err; diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 4654824747a4..a4db3d22aac4 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -578,9 +578,9 @@ badframe: return 0; } -static inline void __user *compat_get_sigframe(struct k_sigaction *ka, - struct pt_regs *regs, - int framesize) +static void __user *compat_get_sigframe(struct k_sigaction *ka, + struct pt_regs *regs, + int framesize) { compat_ulong_t sp = regs->compat_sp; void __user *frame; @@ -605,9 +605,9 @@ static inline void __user *compat_get_sigframe(struct k_sigaction *ka, return frame; } -static int compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, - compat_ulong_t __user *rc, void __user *frame, - int usig) +static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, + compat_ulong_t __user *rc, void __user *frame, + int usig) { compat_ulong_t handler = ptr_to_compat(ka->sa.sa_handler); compat_ulong_t retcode; @@ -643,8 +643,6 @@ static int compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, regs->compat_lr = retcode; regs->pc = handler; regs->pstate = spsr; - - return 0; } static int compat_setup_sigframe(struct compat_sigframe __user *sf, @@ -714,11 +712,9 @@ int compat_setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, err |= __copy_to_user(&frame->sig.uc.uc_stack, &stack, sizeof(stack)); err |= compat_setup_sigframe(&frame->sig, regs, set); - if (err == 0) - err = compat_setup_return(regs, ka, frame->sig.retcode, frame, - usig); if (err == 0) { + compat_setup_return(regs, ka, frame->sig.retcode, frame, usig); regs->regs[1] = (compat_ulong_t)(unsigned long)&frame->info; regs->regs[2] = (compat_ulong_t)(unsigned long)&frame->sig.uc; } @@ -741,7 +737,7 @@ int compat_setup_frame(int usig, struct k_sigaction *ka, sigset_t *set, err |= compat_setup_sigframe(frame, regs, set); if (err == 0) - err = compat_setup_return(regs, ka, frame->retcode, frame, usig); + compat_setup_return(regs, ka, frame->retcode, frame, usig); return err; } diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index ba457943a16b..c958cb84d75f 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -239,7 +239,7 @@ void update_vsyscall(struct timekeeper *tk) if (!use_syscall) { vdso_data->cs_cycle_last = tk->clock->cycle_last; vdso_data->xtime_clock_sec = tk->xtime_sec; - vdso_data->xtime_clock_nsec = tk->xtime_nsec >> tk->shift; + vdso_data->xtime_clock_nsec = tk->xtime_nsec; vdso_data->cs_mult = tk->mult; vdso_data->cs_shift = tk->shift; vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec; diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S index dcb8c203a3b2..8bf658d974f9 100644 --- a/arch/arm64/kernel/vdso/gettimeofday.S +++ b/arch/arm64/kernel/vdso/gettimeofday.S @@ -62,18 +62,19 @@ ENTRY(__kernel_gettimeofday) /* If tv is NULL, skip to the timezone code. */ cbz x0, 2f bl __do_get_tspec - seqcnt_check w13, 1b + seqcnt_check w9, 1b /* Convert ns to us. */ - mov x11, #1000 - udiv x10, x10, x11 - stp x9, x10, [x0, #TVAL_TV_SEC] + mov x13, #1000 + lsl x13, x13, x12 + udiv x11, x11, x13 + stp x10, x11, [x0, #TVAL_TV_SEC] 2: /* If tz is NULL, return 0. */ cbz x1, 3f ldp w4, w5, [vdso_data, #VDSO_TZ_MINWEST] - seqcnt_read w13 - seqcnt_check w13, 1b + seqcnt_read w9 + seqcnt_check w9, 1b stp w4, w5, [x1, #TZ_MINWEST] 3: mov x0, xzr @@ -102,17 +103,17 @@ ENTRY(__kernel_clock_gettime) cbnz use_syscall, 7f bl __do_get_tspec - seqcnt_check w13, 1b + seqcnt_check w9, 1b cmp w0, #CLOCK_MONOTONIC b.ne 6f /* Get wtm timespec. */ - ldp x14, x15, [vdso_data, #VDSO_WTM_CLK_SEC] + ldp x13, x14, [vdso_data, #VDSO_WTM_CLK_SEC] /* Check the sequence counter. */ - seqcnt_read w13 - seqcnt_check w13, 1b + seqcnt_read w9 + seqcnt_check w9, 1b b 4f 2: cmp w0, #CLOCK_REALTIME_COARSE @@ -122,37 +123,40 @@ ENTRY(__kernel_clock_gettime) /* Get coarse timespec. */ adr vdso_data, _vdso_data 3: seqcnt_acquire - ldp x9, x10, [vdso_data, #VDSO_XTIME_CRS_SEC] - - cmp w0, #CLOCK_MONOTONIC_COARSE - b.ne 6f + ldp x10, x11, [vdso_data, #VDSO_XTIME_CRS_SEC] /* Get wtm timespec. */ - ldp x14, x15, [vdso_data, #VDSO_WTM_CLK_SEC] + ldp x13, x14, [vdso_data, #VDSO_WTM_CLK_SEC] /* Check the sequence counter. */ - seqcnt_read w13 - seqcnt_check w13, 3b + seqcnt_read w9 + seqcnt_check w9, 3b + + cmp w0, #CLOCK_MONOTONIC_COARSE + b.ne 6f 4: /* Add on wtm timespec. */ - add x9, x9, x14 - add x10, x10, x15 + add x10, x10, x13 + lsl x14, x14, x12 + add x11, x11, x14 /* Normalise the new timespec. */ - mov x14, #NSEC_PER_SEC_LO16 - movk x14, #NSEC_PER_SEC_HI16, lsl #16 - cmp x10, x14 + mov x15, #NSEC_PER_SEC_LO16 + movk x15, #NSEC_PER_SEC_HI16, lsl #16 + lsl x15, x15, x12 + cmp x11, x15 b.lt 5f - sub x10, x10, x14 - add x9, x9, #1 + sub x11, x11, x15 + add x10, x10, #1 5: - cmp x10, #0 + cmp x11, #0 b.ge 6f - add x10, x10, x14 - sub x9, x9, #1 + add x11, x11, x15 + sub x10, x10, #1 6: /* Store to the user timespec. */ - stp x9, x10, [x1, #TSPEC_TV_SEC] + lsr x11, x11, x12 + stp x10, x11, [x1, #TSPEC_TV_SEC] mov x0, xzr ret x2 7: @@ -203,39 +207,39 @@ ENDPROC(__kernel_clock_getres) * Expects vdso_data to be initialised. * Clobbers the temporary registers (x9 - x15). * Returns: - * - (x9, x10) = (ts->tv_sec, ts->tv_nsec) - * - (x11, x12) = (xtime->tv_sec, xtime->tv_nsec) - * - w13 = vDSO sequence counter + * - w9 = vDSO sequence counter + * - (x10, x11) = (ts->tv_sec, shifted ts->tv_nsec) + * - w12 = cs_shift */ ENTRY(__do_get_tspec) .cfi_startproc /* Read from the vDSO data page. */ ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST] - ldp x11, x12, [vdso_data, #VDSO_XTIME_CLK_SEC] - ldp w14, w15, [vdso_data, #VDSO_CS_MULT] - seqcnt_read w13 + ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC] + ldp w11, w12, [vdso_data, #VDSO_CS_MULT] + seqcnt_read w9 - /* Read the physical counter. */ + /* Read the virtual counter. */ isb - mrs x9, cntpct_el0 + mrs x15, cntvct_el0 /* Calculate cycle delta and convert to ns. */ - sub x10, x9, x10 + sub x10, x15, x10 /* We can only guarantee 56 bits of precision. */ - movn x9, #0xff0, lsl #48 - and x10, x9, x10 - mul x10, x10, x14 - lsr x10, x10, x15 + movn x15, #0xff00, lsl #48 + and x10, x15, x10 + mul x10, x10, x11 /* Use the kernel time to calculate the new timespec. */ - add x10, x12, x10 - mov x14, #NSEC_PER_SEC_LO16 - movk x14, #NSEC_PER_SEC_HI16, lsl #16 - udiv x15, x10, x14 - add x9, x15, x11 - mul x14, x14, x15 - sub x10, x10, x14 + mov x11, #NSEC_PER_SEC_LO16 + movk x11, #NSEC_PER_SEC_HI16, lsl #16 + lsl x11, x11, x12 + add x15, x10, x14 + udiv x14, x15, x11 + add x10, x13, x14 + mul x13, x14, x11 + sub x11, x15, x13 ret .cfi_endproc diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 1909a69983ca..afadae6682ed 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -36,6 +36,8 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +static const char *fault_name(unsigned int esr); + /* * Dump out the page tables associated with 'addr' in mm 'mm'. */ @@ -112,8 +114,9 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr, struct siginfo si; if (show_unhandled_signals) { - pr_info("%s[%d]: unhandled page fault (%d) at 0x%08lx, code 0x%03x\n", - tsk->comm, task_pid_nr(tsk), sig, addr, esr); + pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n", + tsk->comm, task_pid_nr(tsk), fault_name(esr), sig, + addr, esr); show_pte(tsk->mm, addr); show_regs(regs); } @@ -450,6 +453,12 @@ static struct fault_info { { do_bad, SIGBUS, 0, "unknown 63" }, }; +static const char *fault_name(unsigned int esr) +{ + const struct fault_info *inf = fault_info + (esr & 63); + return inf->name; +} + /* * Dispatch a data abort to the relevant handler. */ diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c index c144adb1682f..88611c3a421a 100644 --- a/arch/arm64/mm/flush.c +++ b/arch/arm64/mm/flush.c @@ -27,10 +27,6 @@ #include "mm.h" -void flush_cache_mm(struct mm_struct *mm) -{ -} - void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { @@ -38,11 +34,6 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, __flush_icache_all(); } -void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, - unsigned long pfn) -{ -} - static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, unsigned long uaddr, void *kaddr, unsigned long len) diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 4cd28931dba9..800aac306a08 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -79,8 +79,8 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) #ifdef CONFIG_ZONE_DMA32 /* 4GB maximum for 32-bit only capable devices */ - max_dma32 = min(max, MAX_DMA32_PFN); - zone_size[ZONE_DMA32] = max(min, max_dma32) - min; + max_dma32 = max(min, min(max, MAX_DMA32_PFN)); + zone_size[ZONE_DMA32] = max_dma32 - min; #endif zone_size[ZONE_NORMAL] = max - max_dma32; diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 649aeb9acecb..202d71a15be1 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -195,9 +195,6 @@ source "kernel/Kconfig.preempt" config QUICKLIST def_bool y -config HAVE_ARCH_BOOTMEM - def_bool n - config ARCH_HAVE_MEMORY_PRESENT def_bool n diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index a06bfccc2840..f4025db184ff 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -109,7 +109,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350 CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig index d8f1fe80d210..c76a49b9e9d0 100644 --- a/arch/avr32/configs/atngw100_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100_evklcd100_defconfig @@ -125,7 +125,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350 CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig index d4c5b19ec950..2d8ab089a64e 100644 --- a/arch/avr32/configs/atngw100_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100_evklcd101_defconfig @@ -124,7 +124,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350 CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig index 77ca4f905d2c..b189e0cab04b 100644 --- a/arch/avr32/configs/atngw100_mrmt_defconfig +++ b/arch/avr32/configs/atngw100_mrmt_defconfig @@ -99,7 +99,7 @@ CONFIG_SND_ATMEL_AC97C=m # CONFIG_SND_SPI is not set CONFIG_USB_GADGET=m CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig index 6e0dca4d3131..2e4de42a53c4 100644 --- a/arch/avr32/configs/atngw100mkii_defconfig +++ b/arch/avr32/configs/atngw100mkii_defconfig @@ -111,7 +111,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350 CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig index 7f2a344a5fa8..fad3cd22dfd3 100644 --- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig @@ -128,7 +128,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350 CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig index 085eeba88f67..29986230aaa5 100644 --- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig @@ -127,7 +127,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350 CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index d1a887e64055..a582465e1cef 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -126,7 +126,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index 956f2819ad45..57a79df2ce5d 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -105,7 +105,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig index 40c69f38c61a..1a49bd8c6340 100644 --- a/arch/avr32/configs/atstk1004_defconfig +++ b/arch/avr32/configs/atstk1004_defconfig @@ -104,7 +104,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 511eb8af356d..206a1b67f763 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -129,7 +129,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig index 19973b06170c..0421498d666b 100644 --- a/arch/avr32/configs/favr-32_defconfig +++ b/arch/avr32/configs/favr-32_defconfig @@ -117,7 +117,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig index 6f45681196d1..82f24eb251bd 100644 --- a/arch/avr32/configs/hammerhead_defconfig +++ b/arch/avr32/configs/hammerhead_defconfig @@ -127,7 +127,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=m CONFIG_MMC_ATMELMCI=m diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild index 4807ded352c5..4dd4f78d3dcc 100644 --- a/arch/avr32/include/asm/Kbuild +++ b/arch/avr32/include/asm/Kbuild @@ -1,3 +1,4 @@ generic-y += clkdev.h generic-y += exec.h +generic-y += trace_clock.h diff --git a/arch/avr32/include/asm/mach/serial_at91.h b/arch/avr32/include/asm/mach/serial_at91.h deleted file mode 100644 index 55b317a89061..000000000000 --- a/arch/avr32/include/asm/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct atmel_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void atmel_register_uart_fns(struct atmel_port_fns *fns); -#else -#define atmel_register_uart_fns(fns) do { } while (0) -#endif - - diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 70742ec997f8..d485b0391357 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -26,7 +26,6 @@ static inline void __deprecated at32_add_system_devices(void) } -#define ATMEL_MAX_UART 4 extern struct platform_device *atmel_default_console_device; /* Flags for selecting USART extra pins */ @@ -34,13 +33,6 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CTS 0x02 #define ATMEL_USART_CLK 0x04 -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); struct platform_device *at32_add_device_usart(unsigned int id); diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index c280a50e7943..f59c80ee78e3 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -106,7 +106,7 @@ CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=m CONFIG_USB_GADGET=m CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_RTC_CLASS=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 349922be01f3..e961483f1879 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -107,7 +107,7 @@ CONFIG_USB_ZERO=m CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=m diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index 0456deaa2d6f..24936b91a6ee 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -83,7 +83,7 @@ CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_USB_GADGET=m CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=y diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 5a0625aad6a0..27d70759474c 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -38,6 +38,7 @@ generic-y += statfs.h generic-y += termbits.h generic-y += termios.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += ucontext.h generic-y += unaligned.h diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile index a9eb9597e03c..e72eb3417239 100644 --- a/arch/c6x/Makefile +++ b/arch/c6x/Makefile @@ -41,7 +41,7 @@ DTB:=$(subst dtbImage.,,$(filter dtbImage.%, $(MAKECMDGOALS))) export DTB ifneq ($(DTB),) -core-y += $(boot)/ +core-y += $(boot)/dts/ endif # With make 3.82 we cannot mix normal and wildcard targets diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile index 6891257d514c..8734abee548e 100644 --- a/arch/c6x/boot/Makefile +++ b/arch/c6x/boot/Makefile @@ -6,25 +6,5 @@ OBJCOPYFLAGS_vmlinux.bin := -O binary $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) -DTC_FLAGS ?= -p 1024 - -ifneq ($(DTB),) -obj-y += linked_dtb.o -endif - -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -quiet_cmd_cp = CP $< $@$2 - cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) - -# Generate builtin.dtb from $(DTB).dtb -$(obj)/builtin.dtb: $(obj)/$(DTB).dtb - $(call if_changed,cp) - -$(obj)/linked_dtb.o: $(obj)/builtin.dtb - $(obj)/dtbImage.%: vmlinux $(call if_changed,objcopy) - -clean-files := $(obj)/*.dtb diff --git a/arch/c6x/boot/dts/Makefile b/arch/c6x/boot/dts/Makefile new file mode 100644 index 000000000000..c7528b02d061 --- /dev/null +++ b/arch/c6x/boot/dts/Makefile @@ -0,0 +1,20 @@ +# +# Makefile for device trees +# + +DTC_FLAGS ?= -p 1024 + +ifneq ($(DTB),) +obj-y += linked_dtb.o +endif + +quiet_cmd_cp = CP $< $@$2 + cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) + +# Generate builtin.dtb from $(DTB).dtb +$(obj)/builtin.dtb: $(obj)/$(DTB).dtb + $(call if_changed,cp) + +$(obj)/linked_dtb.o: $(obj)/builtin.dtb + +clean-files := *.dtb diff --git a/arch/c6x/boot/dts/linked_dtb.S b/arch/c6x/boot/dts/linked_dtb.S new file mode 100644 index 000000000000..cf347f1d16ce --- /dev/null +++ b/arch/c6x/boot/dts/linked_dtb.S @@ -0,0 +1,2 @@ +.section __fdt_blob,"a" +.incbin "arch/c6x/boot/dts/builtin.dtb" diff --git a/arch/c6x/boot/linked_dtb.S b/arch/c6x/boot/linked_dtb.S deleted file mode 100644 index 57a4454eaec3..000000000000 --- a/arch/c6x/boot/linked_dtb.S +++ /dev/null @@ -1,2 +0,0 @@ -.section __fdt_blob,"a" -.incbin "arch/c6x/boot/builtin.dtb" diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild index 112a496d8355..eae7b5963e86 100644 --- a/arch/c6x/include/asm/Kbuild +++ b/arch/c6x/include/asm/Kbuild @@ -49,6 +49,7 @@ generic-y += termbits.h generic-y += termios.h generic-y += tlbflush.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += ucontext.h generic-y += user.h diff --git a/arch/c6x/include/asm/setup.h b/arch/c6x/include/asm/setup.h new file mode 100644 index 000000000000..ecead15872a6 --- /dev/null +++ b/arch/c6x/include/asm/setup.h @@ -0,0 +1,33 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_SETUP_H +#define _ASM_C6X_SETUP_H + +#include <uapi/asm/setup.h> + +#ifndef __ASSEMBLY__ +extern char c6x_command_line[COMMAND_LINE_SIZE]; + +extern int c6x_add_memory(phys_addr_t start, unsigned long size); + +extern unsigned long ram_start; +extern unsigned long ram_end; + +extern int c6x_num_cores; +extern unsigned int c6x_silicon_rev; +extern unsigned int c6x_devstat; +extern unsigned char c6x_fuse_mac[6]; + +extern void machine_init(unsigned long dt_ptr); +extern void time_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_C6X_SETUP_H */ diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild index c312b424c433..e9bc2b2b8147 100644 --- a/arch/c6x/include/uapi/asm/Kbuild +++ b/arch/c6x/include/uapi/asm/Kbuild @@ -1,6 +1,8 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +generic-y += kvm_para.h + header-y += byteorder.h header-y += kvm_para.h header-y += ptrace.h diff --git a/arch/c6x/include/uapi/asm/kvm_para.h b/arch/c6x/include/uapi/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b957..000000000000 --- a/arch/c6x/include/uapi/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kvm_para.h> diff --git a/arch/c6x/include/uapi/asm/setup.h b/arch/c6x/include/uapi/asm/setup.h index a01e31896fa9..ad9ac97a8dad 100644 --- a/arch/c6x/include/uapi/asm/setup.h +++ b/arch/c6x/include/uapi/asm/setup.h @@ -1,33 +1,6 @@ -/* - * Port on Texas Instruments TMS320C6x architecture - * - * Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated - * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASM_C6X_SETUP_H -#define _ASM_C6X_SETUP_H +#ifndef _UAPI_ASM_C6X_SETUP_H +#define _UAPI_ASM_C6X_SETUP_H #define COMMAND_LINE_SIZE 1024 -#ifndef __ASSEMBLY__ -extern char c6x_command_line[COMMAND_LINE_SIZE]; - -extern int c6x_add_memory(phys_addr_t start, unsigned long size); - -extern unsigned long ram_start; -extern unsigned long ram_end; - -extern int c6x_num_cores; -extern unsigned int c6x_silicon_rev; -extern unsigned int c6x_devstat; -extern unsigned char c6x_fuse_mac[6]; - -extern void machine_init(unsigned long dt_ptr); -extern void time_init(void); - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_C6X_SETUP_H */ +#endif /* _UAPI_ASM_C6X_SETUP_H */ diff --git a/arch/c6x/kernel/entry.S b/arch/c6x/kernel/entry.S index 1037b98953ca..5239057de4c4 100644 --- a/arch/c6x/kernel/entry.S +++ b/arch/c6x/kernel/entry.S @@ -277,6 +277,8 @@ work_rescheduled: [A1] BNOP .S1 work_resched,5 work_notifysig: + ;; enable interrupts for do_notify_resume() + UNMASK_INT B2 B .S2 do_notify_resume LDW .D2T1 *+SP(REGS__END+8),A6 ; syscall flag ADDKPC .S2 resume_userspace,B3,1 @@ -417,8 +419,7 @@ ENTRY(ret_from_kernel_thread) ENDPROC(ret_from_kernel_thread) ;; - ;; These are the interrupt handlers, responsible for calling __do_IRQ() - ;; int6 is used for syscalls (see _system_call entry) + ;; These are the interrupt handlers, responsible for calling c6x_do_IRQ() ;; .macro SAVE_ALL_INT SAVE_ALL IRP,ITSR diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild index 6d43a951b5ec..15a122c3767c 100644 --- a/arch/cris/include/asm/Kbuild +++ b/arch/cris/include/asm/Kbuild @@ -11,3 +11,4 @@ header-y += sync_serial.h generic-y += clkdev.h generic-y += exec.h generic-y += module.h +generic-y += trace_clock.h diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild index 4a159da23633..c5d767028306 100644 --- a/arch/frv/include/asm/Kbuild +++ b/arch/frv/include/asm/Kbuild @@ -1,3 +1,4 @@ generic-y += clkdev.h generic-y += exec.h +generic-y += trace_clock.h diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild index 50bbf387b2f8..4bc8ae73e08a 100644 --- a/arch/h8300/include/asm/Kbuild +++ b/arch/h8300/include/asm/Kbuild @@ -3,3 +3,4 @@ include include/asm-generic/Kbuild.asm generic-y += clkdev.h generic-y += exec.h generic-y += module.h +generic-y += trace_clock.h diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild index 3bfa9b30f448..bdb54ceb53bc 100644 --- a/arch/hexagon/include/asm/Kbuild +++ b/arch/hexagon/include/asm/Kbuild @@ -48,6 +48,7 @@ generic-y += stat.h generic-y += termbits.h generic-y += termios.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += ucontext.h generic-y += unaligned.h diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index ec536e4e36c9..fc3924d18c1f 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -555,6 +555,7 @@ static int __init simrs_init(void) return 0; err_free_tty: put_tty_driver(hp_simserial_driver); + tty_port_destroy(&state->port); return retval; } diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild index dd02f09b6eda..05b03ecd7933 100644 --- a/arch/ia64/include/asm/Kbuild +++ b/arch/ia64/include/asm/Kbuild @@ -2,3 +2,4 @@ generic-y += clkdev.h generic-y += exec.h generic-y += kvm_para.h +generic-y += trace_clock.h diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h index 3deac956d325..7fcf7f08ab06 100644 --- a/arch/ia64/include/asm/cputime.h +++ b/arch/ia64/include/asm/cputime.h @@ -103,5 +103,7 @@ static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val) #define cputime64_to_clock_t(__ct) \ cputime_to_clock_t((__force cputime_t)__ct) +extern void arch_vtime_task_switch(struct task_struct *tsk); + #endif /* CONFIG_VIRT_CPU_ACCOUNTING */ #endif /* __IA64_CPUTIME_H */ diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h index d05e78f6db94..f69c32ffbe6a 100644 --- a/arch/ia64/include/asm/device.h +++ b/arch/ia64/include/asm/device.h @@ -7,9 +7,6 @@ #define _ASM_IA64_DEVICE_H struct dev_archdata { -#ifdef CONFIG_ACPI - void *acpi_handle; -#endif #ifdef CONFIG_INTEL_IOMMU void *iommu; /* hook for IOMMU specific extension */ #endif diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h index 2c26321c28c3..74a7cc3293bc 100644 --- a/arch/ia64/include/asm/io.h +++ b/arch/ia64/include/asm/io.h @@ -90,7 +90,7 @@ phys_to_virt (unsigned long address) #define ARCH_HAS_VALID_PHYS_ADDR_RANGE extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size); -extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */ +extern int valid_phys_addr_range (phys_addr_t addr, size_t count); /* efi.c */ extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count); /* diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 440578850ae5..e9682f5be343 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -633,6 +633,7 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); } +EXPORT_SYMBOL_GPL(acpi_register_gsi); void acpi_unregister_gsi(u32 gsi) { @@ -644,6 +645,7 @@ void acpi_unregister_gsi(u32 gsi) iosapic_unregister_intr(gsi); } +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); static int __init acpi_parse_fadt(struct acpi_table_header *table) { diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index d37bbd48637f..f034563aeae5 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -870,7 +870,7 @@ kern_mem_attribute (unsigned long phys_addr, unsigned long size) EXPORT_SYMBOL(kern_mem_attribute); int -valid_phys_addr_range (unsigned long phys_addr, unsigned long size) +valid_phys_addr_range (phys_addr_t phys_addr, unsigned long size) { u64 attr; diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index f6388216080d..b1995efbfd21 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -83,7 +83,7 @@ static struct clocksource *itc_clocksource; extern cputime_t cycle_to_cputime(u64 cyc); -static void vtime_account_user(struct task_struct *tsk) +void vtime_account_user(struct task_struct *tsk) { cputime_t delta_utime; struct thread_info *ti = task_thread_info(tsk); @@ -100,18 +100,11 @@ static void vtime_account_user(struct task_struct *tsk) * accumulated times to the current process, and to prepare accounting on * the next process. */ -void vtime_task_switch(struct task_struct *prev) +void arch_vtime_task_switch(struct task_struct *prev) { struct thread_info *pi = task_thread_info(prev); struct thread_info *ni = task_thread_info(current); - if (idle_task(smp_processor_id()) != prev) - vtime_account_system(prev); - else - vtime_account_idle(prev); - - vtime_account_user(prev); - pi->ac_stamp = ni->ac_stamp; ni->ac_stime = ni->ac_utime = 0; } @@ -126,6 +119,8 @@ static cputime_t vtime_delta(struct task_struct *tsk) cputime_t delta_stime; __u64 now; + WARN_ON_ONCE(!irqs_disabled()); + now = ia64_get_itc(); delta_stime = cycle_to_cputime(ti->ac_stime + (now - ti->ac_stamp)); @@ -147,15 +142,6 @@ void vtime_account_idle(struct task_struct *tsk) account_idle_time(vtime_delta(tsk)); } -/* - * Called from the timer interrupt handler to charge accumulated user time - * to the current process. Must be called with interrupts disabled. - */ -void account_process_tick(struct task_struct *p, int user_tick) -{ - vtime_account_user(p); -} - #endif /* CONFIG_VIRT_CPU_ACCOUNTING */ static irqreturn_t diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index c64460b9c704..dc00b2c1b42a 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -275,7 +275,7 @@ static struct attribute * cache_default_attrs[] = { #define to_object(k) container_of(k, struct cache_info, kobj) #define to_attr(a) container_of(a, struct cache_attr, attr) -static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char * buf) +static ssize_t ia64_cache_show(struct kobject * kobj, struct attribute * attr, char * buf) { struct cache_attr *fattr = to_attr(attr); struct cache_info *this_leaf = to_object(kobj); @@ -286,7 +286,7 @@ static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char * } static const struct sysfs_ops cache_sysfs_ops = { - .show = cache_show + .show = ia64_cache_show }; static struct kobj_type cache_ktype = { diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild index 50bbf387b2f8..4bc8ae73e08a 100644 --- a/arch/m32r/include/asm/Kbuild +++ b/arch/m32r/include/asm/Kbuild @@ -3,3 +3,4 @@ include include/asm-generic/Kbuild.asm generic-y += clkdev.h generic-y += exec.h generic-y += module.h +generic-y += trace_clock.h diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c index 16d170f53bfd..6685bf45c2c3 100644 --- a/arch/m68k/emu/nfcon.c +++ b/arch/m68k/emu/nfcon.c @@ -120,8 +120,6 @@ static int __init nfcon_init(void) { int res; - tty_port_init(&nfcon_tty_port); - stderr_id = nf_get_id("NF_STDERR"); if (!stderr_id) return -ENODEV; @@ -130,6 +128,8 @@ static int __init nfcon_init(void) if (!nfcon_tty_driver) return -ENOMEM; + tty_port_init(&nfcon_tty_port); + nfcon_tty_driver->driver_name = "nfcon"; nfcon_tty_driver->name = "nfcon"; nfcon_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM; @@ -143,6 +143,7 @@ static int __init nfcon_init(void) if (res) { pr_err("failed to register nfcon tty driver\n"); put_tty_driver(nfcon_tty_driver); + tty_port_destroy(&nfcon_tty_port); return res; } @@ -157,6 +158,7 @@ static void __exit nfcon_exit(void) unregister_console(&nf_console); tty_unregister_driver(nfcon_tty_driver); put_tty_driver(nfcon_tty_driver); + tty_port_destroy(&nfcon_tty_port); } module_init(nfcon_init); diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 88fa3ac86fae..7f1949c0e089 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -24,6 +24,7 @@ generic-y += sections.h generic-y += siginfo.h generic-y += statfs.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += word-at-a-time.h generic-y += xor.h diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index b23c40eb7a52..d26fb905ee0a 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -57,7 +57,7 @@ boot := arch/microblaze/boot DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS))) ifneq ($(DTB),) - core-y += $(boot)/ + core-y += $(boot)/dts/ endif # defines filename extension depending memory management type diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index fa83ea497db7..80fe54fb7ca3 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -2,21 +2,10 @@ # arch/microblaze/boot/Makefile # -obj-y += linked_dtb.o - targets := linux.bin linux.bin.gz simpleImage.% OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary -# Ensure system.dtb exists -$(obj)/linked_dtb.o: $(obj)/system.dtb - -# Generate system.dtb from $(DTB).dtb -ifneq ($(DTB),system) -$(obj)/system.dtb: $(obj)/$(DTB).dtb - $(call if_changed,cp) -endif - $(obj)/linux.bin: vmlinux FORCE $(call if_changed,objcopy) $(call if_changed,uimage) @@ -45,10 +34,4 @@ $(obj)/simpleImage.%: vmlinux FORCE @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' -# Rule to build device tree blobs -DTC_FLAGS := -p 1024 - -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub +clean-files += simpleImage.*.unstrip linux.bin.ub diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile new file mode 100644 index 000000000000..c3b3a5d67b89 --- /dev/null +++ b/arch/microblaze/boot/dts/Makefile @@ -0,0 +1,22 @@ +# +# arch/microblaze/boot/Makefile +# + +obj-y += linked_dtb.o + +# Ensure system.dtb exists +$(obj)/linked_dtb.o: $(obj)/system.dtb + +# Generate system.dtb from $(DTB).dtb +ifneq ($(DTB),system) +$(obj)/system.dtb: $(obj)/$(DTB).dtb + $(call if_changed,cp) +endif + +quiet_cmd_cp = CP $< $@$2 + cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) + +# Rule to build device tree blobs +DTC_FLAGS := -p 1024 + +clean-files += *.dtb diff --git a/arch/microblaze/boot/dts/linked_dtb.S b/arch/microblaze/boot/dts/linked_dtb.S new file mode 100644 index 000000000000..23345af3721f --- /dev/null +++ b/arch/microblaze/boot/dts/linked_dtb.S @@ -0,0 +1,2 @@ +.section __fdt_blob,"a" +.incbin "arch/microblaze/boot/dts/system.dtb" diff --git a/arch/microblaze/boot/linked_dtb.S b/arch/microblaze/boot/linked_dtb.S deleted file mode 100644 index cb2b537aebee..000000000000 --- a/arch/microblaze/boot/linked_dtb.S +++ /dev/null @@ -1,3 +0,0 @@ -.section __fdt_blob,"a" -.incbin "arch/microblaze/boot/system.dtb" - diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild index 88a758a67922..eb3a46c096fe 100644 --- a/arch/microblaze/include/asm/Kbuild +++ b/arch/microblaze/include/asm/Kbuild @@ -3,4 +3,5 @@ include include/asm-generic/Kbuild.asm header-y += elf.h generic-y += clkdev.h generic-y += exec.h +generic-y += trace_clock.h generic-y += syscalls.h diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 4dbb5055d04b..a1c5b996d66d 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -1346,8 +1346,6 @@ void __init pcibios_resource_survey(void) pci_assign_unassigned_resources(); } -#ifdef CONFIG_HOTPLUG - /* This is used by the PCI hotplug driver to allocate resource * of newly plugged busses. We can try to consolidate with the * rest of the code later, for now, keep it as-is as our main @@ -1407,8 +1405,6 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); -#endif /* CONFIG_HOTPLUG */ - int pcibios_enable_device(struct pci_dev *dev, int mask) { return pci_enable_resources(dev, mask); diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index 407ebc00e661..cb83d8d21aef 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -6,7 +6,7 @@ # obj-y += prom.o time.o clocks.o platform.o power.o setup.o \ - sleeper.o dma.o dbdma.o vss.o irq.o + sleeper.o dma.o dbdma.o vss.o irq.o usb.o # optional gpiolib support ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index c0f3ce6dcb56..7af941d8e717 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -17,6 +17,8 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/slab.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> @@ -122,6 +124,53 @@ static void __init alchemy_setup_uarts(int ctype) static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32); static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32); +/* Power on callback for the ehci platform driver */ +static int alchemy_ehci_power_on(struct platform_device *pdev) +{ + return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1); +} + +/* Power off/suspend callback for the ehci platform driver */ +static void alchemy_ehci_power_off(struct platform_device *pdev) +{ + alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); +} + +static struct usb_ehci_pdata alchemy_ehci_pdata = { + .no_io_watchdog = 1, + .power_on = alchemy_ehci_power_on, + .power_off = alchemy_ehci_power_off, + .power_suspend = alchemy_ehci_power_off, +}; + +/* Power on callback for the ohci platform driver */ +static int alchemy_ohci_power_on(struct platform_device *pdev) +{ + int unit; + + unit = (pdev->id == 1) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + + return alchemy_usb_control(unit, 1); +} + +/* Power off/suspend callback for the ohci platform driver */ +static void alchemy_ohci_power_off(struct platform_device *pdev) +{ + int unit; + + unit = (pdev->id == 1) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + + alchemy_usb_control(unit, 0); +} + +static struct usb_ohci_pdata alchemy_ohci_pdata = { + .power_on = alchemy_ohci_power_on, + .power_off = alchemy_ohci_power_off, + .power_suspend = alchemy_ohci_power_off, +}; + static unsigned long alchemy_ohci_data[][2] __initdata = { [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT }, [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT }, @@ -169,9 +218,10 @@ static void __init alchemy_setup_usb(int ctype) res[1].start = alchemy_ohci_data[ctype][1]; res[1].end = res[1].start; res[1].flags = IORESOURCE_IRQ; - pdev->name = "au1xxx-ohci"; + pdev->name = "ohci-platform"; pdev->id = 0; pdev->dev.dma_mask = &alchemy_ohci_dmamask; + pdev->dev.platform_data = &alchemy_ohci_pdata; if (platform_device_register(pdev)) printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); @@ -188,9 +238,10 @@ static void __init alchemy_setup_usb(int ctype) res[1].start = alchemy_ehci_data[ctype][1]; res[1].end = res[1].start; res[1].flags = IORESOURCE_IRQ; - pdev->name = "au1xxx-ehci"; + pdev->name = "ehci-platform"; pdev->id = 0; pdev->dev.dma_mask = &alchemy_ehci_dmamask; + pdev->dev.platform_data = &alchemy_ehci_pdata; if (platform_device_register(pdev)) printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); @@ -207,9 +258,10 @@ static void __init alchemy_setup_usb(int ctype) res[1].start = AU1300_USB_INT; res[1].end = res[1].start; res[1].flags = IORESOURCE_IRQ; - pdev->name = "au1xxx-ohci"; + pdev->name = "ohci-platform"; pdev->id = 1; pdev->dev.dma_mask = &alchemy_ohci_dmamask; + pdev->dev.platform_data = &alchemy_ohci_pdata; if (platform_device_register(pdev)) printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n"); diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c new file mode 100644 index 000000000000..936af8359fb2 --- /dev/null +++ b/arch/mips/alchemy/common/usb.c @@ -0,0 +1,614 @@ +/* + * USB block power/access management abstraction. + * + * Au1000+: The OHCI block control register is at the far end of the OHCI memory + * area. Au1550 has OHCI on different base address. No need to handle + * UDC here. + * Au1200: one register to control access and clocks to O/EHCI, UDC and OTG + * as well as the PHY for EHCI and UDC. + * + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/syscore_ops.h> +#include <asm/mach-au1x00/au1000.h> + +/* control register offsets */ +#define AU1000_OHCICFG 0x7fffc +#define AU1550_OHCICFG 0x07ffc +#define AU1200_USBCFG 0x04 + +/* Au1000 USB block config bits */ +#define USBHEN_RD (1 << 4) /* OHCI reset-done indicator */ +#define USBHEN_CE (1 << 3) /* OHCI block clock enable */ +#define USBHEN_E (1 << 2) /* OHCI block enable */ +#define USBHEN_C (1 << 1) /* OHCI block coherency bit */ +#define USBHEN_BE (1 << 0) /* OHCI Big-Endian */ + +/* Au1200 USB config bits */ +#define USBCFG_PFEN (1 << 31) /* prefetch enable (undoc) */ +#define USBCFG_RDCOMB (1 << 30) /* read combining (undoc) */ +#define USBCFG_UNKNOWN (5 << 20) /* unknown, leave this way */ +#define USBCFG_SSD (1 << 23) /* serial short detect en */ +#define USBCFG_PPE (1 << 19) /* HS PHY PLL */ +#define USBCFG_UCE (1 << 18) /* UDC clock enable */ +#define USBCFG_ECE (1 << 17) /* EHCI clock enable */ +#define USBCFG_OCE (1 << 16) /* OHCI clock enable */ +#define USBCFG_FLA(x) (((x) & 0x3f) << 8) +#define USBCFG_UCAM (1 << 7) /* coherent access (undoc) */ +#define USBCFG_GME (1 << 6) /* OTG mem access */ +#define USBCFG_DBE (1 << 5) /* UDC busmaster enable */ +#define USBCFG_DME (1 << 4) /* UDC mem enable */ +#define USBCFG_EBE (1 << 3) /* EHCI busmaster enable */ +#define USBCFG_EME (1 << 2) /* EHCI mem enable */ +#define USBCFG_OBE (1 << 1) /* OHCI busmaster enable */ +#define USBCFG_OME (1 << 0) /* OHCI mem enable */ +#define USBCFG_INIT_AU1200 (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\ + USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \ + USBCFG_GME | USBCFG_DBE | USBCFG_DME | \ + USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \ + USBCFG_OME) + +/* Au1300 USB config registers */ +#define USB_DWC_CTRL1 0x00 +#define USB_DWC_CTRL2 0x04 +#define USB_VBUS_TIMER 0x10 +#define USB_SBUS_CTRL 0x14 +#define USB_MSR_ERR 0x18 +#define USB_DWC_CTRL3 0x1C +#define USB_DWC_CTRL4 0x20 +#define USB_OTG_STATUS 0x28 +#define USB_DWC_CTRL5 0x2C +#define USB_DWC_CTRL6 0x30 +#define USB_DWC_CTRL7 0x34 +#define USB_PHY_STATUS 0xC0 +#define USB_INT_STATUS 0xC4 +#define USB_INT_ENABLE 0xC8 + +#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */ +#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */ +#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */ + +#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */ +#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */ +#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */ + +#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19) +#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18) +#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17) +#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16) + +#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */ + +#define USB_INTEN_FORCE 0x20 +#define USB_INTEN_PHY 0x10 +#define USB_INTEN_UDC 0x08 +#define USB_INTEN_EHCI 0x04 +#define USB_INTEN_OHCI1 0x02 +#define USB_INTEN_OHCI0 0x01 + +static DEFINE_SPINLOCK(alchemy_usb_lock); + +static inline void __au1300_usb_phyctl(void __iomem *base, int enable) +{ + unsigned long r, s; + + r = __raw_readl(base + USB_DWC_CTRL2); + s = __raw_readl(base + USB_DWC_CTRL3); + + s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN | + USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN; + + if (enable) { + /* simply enable all PHYs */ + r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS; + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } else if (!s) { + /* no USB block active, do disable all PHYs */ + r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS); + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } +} + +static inline void __au1300_ohci_control(void __iomem *base, int enable, int id) +{ + unsigned long r; + + if (enable) { + __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */ + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */ + r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); /* power up the PHYs */ + + r = __raw_readl(base + USB_INT_ENABLE); + r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + /* reset the OHCI start clock bit */ + __raw_writel(0, base + USB_DWC_CTRL7); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1); + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN); + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_ehci_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_udc_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_otg_control(void __iomem *base, int enable) +{ + unsigned long r; + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } else { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline int au1300_usb_control(int block, int enable) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1300_ohci_control(base, enable, 0); + break; + case ALCHEMY_USB_OHCI1: + __au1300_ohci_control(base, enable, 1); + break; + case ALCHEMY_USB_EHCI0: + __au1300_ehci_control(base, enable); + break; + case ALCHEMY_USB_UDC0: + __au1300_udc_control(base, enable); + break; + case ALCHEMY_USB_OTG0: + __au1300_otg_control(base, enable); + break; + default: + ret = -ENODEV; + } + return ret; +} + +static inline void au1300_usb_init(void) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + + /* set some sane defaults. Note: we don't fiddle with DWC_CTRL4 + * here at all: Port 2 routing (EHCI or UDC) must be set either + * by boot firmware or platform init code; I can't autodetect + * a sane setting. + */ + __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */ + wmb(); + __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */ + wmb(); + __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */ + wmb(); + __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */ + wmb(); + /* set coherent access bit */ + __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL); + wmb(); +} + +static inline void __au1200_ohci_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG); + wmb(); + udelay(2000); + } else { + __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } +} + +static inline void __au1200_ehci_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } else { + if (!(r & USBCFG_UCE)) /* UDC also off? */ + r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */ + __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } +} + +static inline void __au1200_udc_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG); + wmb(); + } else { + if (!(r & USBCFG_ECE)) /* EHCI also off? */ + r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */ + __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG); + wmb(); + } +} + +static inline int au1200_coherency_bug(void) +{ +#if defined(CONFIG_DMA_COHERENT) + /* Au1200 AB USB does not support coherent memory */ + if (!(read_c0_prid() & 0xff)) { + printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n"); + printk(KERN_INFO "Au1200 USB: update your board or re-configure" + " the kernel\n"); + return -ENODEV; + } +#endif + return 0; +} + +static inline int au1200_usb_control(int block, int enable) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + ret = au1200_coherency_bug(); + if (ret && enable) + goto out; + __au1200_ohci_control(base, enable); + break; + case ALCHEMY_USB_UDC0: + __au1200_udc_control(base, enable); + break; + case ALCHEMY_USB_EHCI0: + ret = au1200_coherency_bug(); + if (ret && enable) + goto out; + __au1200_ehci_control(base, enable); + break; + default: + ret = -ENODEV; + } +out: + return ret; +} + + +/* initialize USB block(s) to a known working state */ +static inline void au1200_usb_init(void) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); + __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG); + wmb(); + udelay(1000); +} + +static inline void au1000_usb_init(unsigned long rb, int reg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg); + unsigned long r = __raw_readl(base); + +#if defined(__BIG_ENDIAN) + r |= USBHEN_BE; +#endif + r |= USBHEN_C; + + __raw_writel(r, base); + wmb(); + udelay(1000); +} + + +static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(rb); + unsigned long r = __raw_readl(base + creg); + + if (enable) { + __raw_writel(r | USBHEN_CE, base + creg); + wmb(); + udelay(1000); + __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg); + wmb(); + udelay(1000); + + /* wait for reset complete (read reg twice: au1500 erratum) */ + while (__raw_readl(base + creg), + !(__raw_readl(base + creg) & USBHEN_RD)) + udelay(1000); + } else { + __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg); + wmb(); + } +} + +static inline int au1000_usb_control(int block, int enable, unsigned long rb, + int creg) +{ + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1xx0_ohci_control(enable, rb, creg); + break; + default: + ret = -ENODEV; + } + return ret; +} + +/* + * alchemy_usb_control - control Alchemy on-chip USB blocks + * @block: USB block to target + * @enable: set 1 to enable a block, 0 to disable + */ +int alchemy_usb_control(int block, int enable) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&alchemy_usb_lock, flags); + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + ret = au1000_usb_control(block, enable, + AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG); + break; + case ALCHEMY_CPU_AU1550: + ret = au1000_usb_control(block, enable, + AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG); + break; + case ALCHEMY_CPU_AU1200: + ret = au1200_usb_control(block, enable); + break; + case ALCHEMY_CPU_AU1300: + ret = au1300_usb_control(block, enable); + break; + default: + ret = -ENODEV; + } + spin_unlock_irqrestore(&alchemy_usb_lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(alchemy_usb_control); + + +static unsigned long alchemy_usb_pmdata[2]; + +static void au1000_usb_pm(unsigned long br, int creg, int susp) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(br); + + if (susp) { + alchemy_usb_pmdata[0] = __raw_readl(base + creg); + /* There appears to be some undocumented reset register.... */ + __raw_writel(0, base + 0x04); + wmb(); + __raw_writel(0, base + creg); + wmb(); + } else { + __raw_writel(alchemy_usb_pmdata[0], base + creg); + wmb(); + } +} + +static void au1200_usb_pm(int susp) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR); + if (susp) { + /* save OTG_CAP/MUX registers which indicate port routing */ + /* FIXME: write an OTG driver to do that */ + alchemy_usb_pmdata[0] = __raw_readl(base + 0x00); + alchemy_usb_pmdata[1] = __raw_readl(base + 0x04); + } else { + /* restore access to all MMIO areas */ + au1200_usb_init(); + + /* restore OTG_CAP/MUX registers */ + __raw_writel(alchemy_usb_pmdata[0], base + 0x00); + __raw_writel(alchemy_usb_pmdata[1], base + 0x04); + wmb(); + } +} + +static void au1300_usb_pm(int susp) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + /* remember Port2 routing */ + if (susp) { + alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4); + } else { + au1300_usb_init(); + __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4); + wmb(); + } +} + +static void alchemy_usb_pm(int susp) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp); + break; + case ALCHEMY_CPU_AU1550: + au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp); + break; + case ALCHEMY_CPU_AU1200: + au1200_usb_pm(susp); + break; + case ALCHEMY_CPU_AU1300: + au1300_usb_pm(susp); + break; + } +} + +static int alchemy_usb_suspend(void) +{ + alchemy_usb_pm(1); + return 0; +} + +static void alchemy_usb_resume(void) +{ + alchemy_usb_pm(0); +} + +static struct syscore_ops alchemy_usb_pm_ops = { + .suspend = alchemy_usb_suspend, + .resume = alchemy_usb_resume, +}; + +static int __init alchemy_usb_init(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG); + break; + case ALCHEMY_CPU_AU1550: + au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG); + break; + case ALCHEMY_CPU_AU1200: + au1200_usb_init(); + break; + case ALCHEMY_CPU_AU1300: + au1300_usb_init(); + break; + } + + register_syscore_ops(&alchemy_usb_pm_ops); + + return 0; +} +arch_initcall(alchemy_usb_init); diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c index 072bb9be2304..bd2bc108e1b5 100644 --- a/arch/mips/ath79/dev-usb.c +++ b/arch/mips/ath79/dev-usb.c @@ -50,13 +50,11 @@ static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32); static struct usb_ehci_pdata ath79_ehci_pdata_v1 = { .has_synopsys_hc_bug = 1, - .port_power_off = 1, }; static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { .caps_offset = 0x100, .has_tt = 1, - .port_power_off = 1, }; static struct platform_device ath79_ehci_device = { diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index bc96e2908f14..6e927cf20df2 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -24,9 +24,6 @@ DTB_FILES = $(patsubst %.dts, %.dtb, $(DTS_FILES)) obj-y += $(patsubst %.dts, %.dtb.o, $(DTS_FILES)) -$(obj)/%.dtb: $(src)/%.dts FORCE - $(call if_changed_dep,dtc) - # Let's keep the .dtb files around in case we want to look at them. .SECONDARY: $(addprefix $(obj)/, $(DTB_FILES)) diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index b6fde2bb51b6..4ca8e5c99225 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -473,7 +473,7 @@ CONFIG_USB_GADGET_NET2280=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_MIDI_GADGET=m CONFIG_LEDS_CLASS=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 17a36c125172..face9d26e6d5 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -233,6 +233,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_NEW_LEDS=y diff --git a/arch/mips/configs/db1235_defconfig b/arch/mips/configs/db1235_defconfig index c48998ffd198..14752dde7540 100644 --- a/arch/mips/configs/db1235_defconfig +++ b/arch/mips/configs/db1235_defconfig @@ -346,8 +346,10 @@ CONFIG_USB=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_CLKGATE=y diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig index 48a40aefaf58..fb64589015fc 100644 --- a/arch/mips/configs/gpr_defconfig +++ b/arch/mips/configs/gpr_defconfig @@ -291,6 +291,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=m CONFIG_USB_LIBUSUAL=y CONFIG_USB_SERIAL=y diff --git a/arch/mips/configs/ls1b_defconfig b/arch/mips/configs/ls1b_defconfig index 80cff8bea8e8..7eb75543ca1a 100644 --- a/arch/mips/configs/ls1b_defconfig +++ b/arch/mips/configs/ls1b_defconfig @@ -76,6 +76,7 @@ CONFIG_HID_GENERIC=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_STORAGE=m CONFIG_USB_SERIAL=m diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 46c61edcdf7b..9fa8f16068d8 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -581,6 +581,7 @@ CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_UHCI_HCD=m CONFIG_USB_U132_HCD=m CONFIG_USB_SL811_HCD=m @@ -661,7 +662,7 @@ CONFIG_USB_GADGET_NET2280=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_MIDI_GADGET=m CONFIG_MMC=m diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index 533053d12ced..9b54b7a403d4 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -1 +1,2 @@ # MIPS headers +generic-y += trace_clock.h diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h index bd94946a18f3..ef99db994c2f 100644 --- a/arch/mips/include/asm/hugetlb.h +++ b/arch/mips/include/asm/hugetlb.h @@ -95,7 +95,17 @@ static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, pte_t *ptep, pte_t pte, int dirty) { - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); + int changed = !pte_same(*ptep, pte); + + if (changed) { + set_pte_at(vma->vm_mm, addr, ptep, pte); + /* + * There could be some standard sized pages in there, + * get them all. + */ + flush_tlb_range(vma, addr, addr + HPAGE_SIZE); + } + return changed; } static inline pte_t huge_ptep_get(pte_t *ptep) diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h index 92403c3d6007..addd56b60694 100644 --- a/arch/mips/include/uapi/asm/ioctls.h +++ b/arch/mips/include/uapi/asm/ioctls.h @@ -86,6 +86,9 @@ #define TIOCGDEV _IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */ #define TIOCVHANGUP 0x5437 +#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ +#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ +#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ /* I hope the range from 0x5480 on is free ... */ #define TIOCSCTTY 0x5480 /* become controlling tty */ diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h index 46d3da0d4b92..9a936ac9a942 100644 --- a/arch/mips/include/uapi/asm/mman.h +++ b/arch/mips/include/uapi/asm/mman.h @@ -87,4 +87,15 @@ /* compatibility flags */ #define MAP_FILE 0 +/* + * When MAP_HUGETLB is set bits [26:31] encode the log2 of the huge page size. + * This gives us 6 bits, which is enough until someone invents 128 bit address + * spaces. + * + * Assume these are all power of twos. + * When 0 use the default page size. + */ +#define MAP_HUGE_SHIFT 26 +#define MAP_HUGE_MASK 0x3f + #endif /* _ASM_MMAN_H */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index b1fb7af3c350..cce3782c96c9 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -510,7 +510,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_R3000A; __cpu_name[cpu] = "R3000A"; } - break; } else { c->cputype = CPU_R3000; __cpu_name[cpu] = "R3000"; diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 3320cb4ac1d4..e5786858cdb6 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -36,6 +36,11 @@ FEXPORT(ret_from_exception) FEXPORT(ret_from_irq) LONG_S s0, TI_REGS($28) FEXPORT(__ret_from_irq) +/* + * We can be coming here from a syscall done in the kernel space, + * e.g. a failed kernel_execve(). + */ +resume_userspace_check: LONG_L t0, PT_STATUS(sp) # returning to kernel mode? andi t0, t0, KU_USER beqz t0, resume_kernel @@ -168,7 +173,7 @@ work_notifysig: # deal with pending signals and move a0, sp li a1, 0 jal do_notify_resume # a2 already loaded - j resume_userspace + j resume_userspace_check FEXPORT(syscall_exit_partial) local_irq_disable # make sure need_resched doesn't diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index d27ca340d46d..629719143763 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -397,14 +397,14 @@ EXPORT(sysn32_call_table) PTR sys_timerfd_create PTR compat_sys_timerfd_gettime /* 6285 */ PTR compat_sys_timerfd_settime - PTR sys_signalfd4 + PTR compat_sys_signalfd4 PTR sys_eventfd2 PTR sys_epoll_create1 PTR sys_dup3 /* 6290 */ PTR sys_pipe2 PTR sys_inotify_init1 - PTR sys_preadv - PTR sys_pwritev + PTR compat_sys_preadv + PTR compat_sys_pwritev PTR compat_sys_rt_tgsigqueueinfo /* 6295 */ PTR sys_perf_event_open PTR sys_accept4 diff --git a/arch/mips/lantiq/dts/Makefile b/arch/mips/lantiq/dts/Makefile index 674fca45f72d..6fa72dd641b2 100644 --- a/arch/mips/lantiq/dts/Makefile +++ b/arch/mips/lantiq/dts/Makefile @@ -1,4 +1 @@ obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o - -$(obj)/%.dtb: $(obj)/%.dts - $(call if_changed,dtc) diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c index e92d59c4bd78..0412ad61e290 100644 --- a/arch/mips/loongson1/common/platform.c +++ b/arch/mips/loongson1/common/platform.c @@ -13,6 +13,7 @@ #include <linux/phy.h> #include <linux/serial_8250.h> #include <linux/stmmac.h> +#include <linux/usb/ehci_pdriver.h> #include <asm-generic/sizes.h> #include <loongson1.h> @@ -107,13 +108,17 @@ static struct resource ls1x_ehci_resources[] = { }, }; +static struct usb_ehci_pdata ls1x_ehci_pdata = { +}; + struct platform_device ls1x_ehci_device = { - .name = "ls1x-ehci", + .name = "ehci-platform", .id = -1, .num_resources = ARRAY_SIZE(ls1x_ehci_resources), .resource = ls1x_ehci_resources, .dev = { .dma_mask = &ls1x_ehci_dmamask, + .platform_data = &ls1x_ehci_pdata, }, }; diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c index 302d779d5b0d..d9be7540a6be 100644 --- a/arch/mips/mm/mmap.c +++ b/arch/mips/mm/mmap.c @@ -45,18 +45,6 @@ static unsigned long mmap_base(unsigned long rnd) return PAGE_ALIGN(TASK_SIZE - gap - rnd); } -static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, - unsigned long pgoff) -{ - unsigned long base = addr & ~shm_align_mask; - unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask; - - if (base + off <= addr) - return base + off; - - return base - off; -} - #define COLOUR_ALIGN(addr, pgoff) \ ((((addr) + shm_align_mask) & ~shm_align_mask) + \ (((pgoff) << PAGE_SHIFT) & shm_align_mask)) @@ -71,6 +59,7 @@ static unsigned long arch_get_unmapped_area_common(struct file *filp, struct vm_area_struct *vma; unsigned long addr = addr0; int do_color_align; + struct vm_unmapped_area_info info; if (unlikely(len > TASK_SIZE)) return -ENOMEM; @@ -107,97 +96,31 @@ static unsigned long arch_get_unmapped_area_common(struct file *filp, return addr; } - if (dir == UP) { - addr = mm->mmap_base; - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); + info.length = len; + info.align_mask = do_color_align ? (PAGE_MASK & shm_align_mask) : 0; + info.align_offset = pgoff << PAGE_SHIFT; - for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (TASK_SIZE - len < addr) - return -ENOMEM; - if (!vma || addr + len <= vma->vm_start) - return addr; - addr = vma->vm_end; - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - } - } else { - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } + if (dir == DOWN) { + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + addr = vm_unmapped_area(&info); + + if (!(addr & ~PAGE_MASK)) + return addr; - /* - * either no address requested, or the mapping can't fit into - * the requested address hole - */ - addr = mm->free_area_cache; - if (do_color_align) { - unsigned long base = - COLOUR_ALIGN_DOWN(addr - len, pgoff); - addr = base + len; - } - - /* make sure it can fit in the remaining address space */ - if (likely(addr > len)) { - vma = find_vma(mm, addr - len); - if (!vma || addr <= vma->vm_start) { - /* cache the address as a hint for next time */ - return mm->free_area_cache = addr - len; - } - } - - if (unlikely(mm->mmap_base < len)) - goto bottomup; - - addr = mm->mmap_base - len; - if (do_color_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - - do { - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (likely(!vma || addr + len <= vma->vm_start)) { - /* cache the address as a hint for next time */ - return mm->free_area_cache = addr; - } - - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = vma->vm_start - len; - if (do_color_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - } while (likely(len < vma->vm_start)); - -bottomup: /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; - - return addr; } + + info.flags = 0; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + return vm_unmapped_area(&info); } unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr0, diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 4b9b935a070e..88e79ad6f811 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -120,18 +120,11 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, if (cpu_context(cpu, mm) != 0) { unsigned long size, flags; - int huge = is_vm_hugetlb_page(vma); ENTER_CRITICAL(flags); - if (huge) { - start = round_down(start, HPAGE_SIZE); - end = round_up(end, HPAGE_SIZE); - size = (end - start) >> HPAGE_SHIFT; - } else { - start = round_down(start, PAGE_SIZE << 1); - end = round_up(end, PAGE_SIZE << 1); - size = (end - start) >> (PAGE_SHIFT + 1); - } + start = round_down(start, PAGE_SIZE << 1); + end = round_up(end, PAGE_SIZE << 1); + size = (end - start) >> (PAGE_SHIFT + 1); if (size <= current_cpu_data.tlbsize/2) { int oldpid = read_c0_entryhi(); int newpid = cpu_asid(cpu, mm); @@ -140,10 +133,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int idx; write_c0_entryhi(start | newpid); - if (huge) - start += HPAGE_SIZE; - else - start += (PAGE_SIZE << 1); + start += (PAGE_SIZE << 1); mtc0_tlbw_hazard(); tlb_probe(); tlb_probe_hazard(); diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile index 67ae3fe296f0..d117d46413aa 100644 --- a/arch/mips/netlogic/dts/Makefile +++ b/arch/mips/netlogic/dts/Makefile @@ -1,4 +1 @@ obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o - -$(obj)/%.dtb: $(obj)/%.dts - $(call if_changed,dtc) diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c index 71b44d82621d..507230eeb768 100644 --- a/arch/mips/netlogic/xlr/platform.c +++ b/arch/mips/netlogic/xlr/platform.c @@ -15,6 +15,8 @@ #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/i2c.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/netlogic/haldefs.h> #include <asm/netlogic/xlr/iomap.h> @@ -123,12 +125,18 @@ static u64 xls_usb_dmamask = ~(u32)0; }, \ } +static struct usb_ehci_pdata xls_usb_ehci_pdata = { + .caps_offset = 0, +}; + +static struct usb_ohci_pdata xls_usb_ohci_pdata; + static struct platform_device xls_usb_ehci_device = - USB_PLATFORM_DEV("ehci-xls", 0, PIC_USB_IRQ); + USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ); static struct platform_device xls_usb_ohci_device_0 = - USB_PLATFORM_DEV("ohci-xls-0", 1, PIC_USB_IRQ); + USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ); static struct platform_device xls_usb_ohci_device_1 = - USB_PLATFORM_DEV("ohci-xls-1", 2, PIC_USB_IRQ); + USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ); static struct platform_device *xls_platform_devices[] = { &xls_usb_ehci_device, @@ -172,14 +180,17 @@ int xls_platform_usb_init(void) memres = CPHYSADDR((unsigned long)usb_mmio); xls_usb_ehci_device.resource[0].start = memres; xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1; + xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata; memres += 0x400; xls_usb_ohci_device_0.resource[0].start = memres; xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1; + xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata; memres += 0x400; xls_usb_ohci_device_1.resource[0].start = memres; xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1; + xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata; return platform_add_devices(xls_platform_devices, ARRAY_SIZE(xls_platform_devices)); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 04e35bcde07c..4040416e0603 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -313,10 +313,8 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } } -#ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); -#endif int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) diff --git a/arch/mips/pnx8550/common/platform.c b/arch/mips/pnx8550/common/platform.c index 5264cc09a27b..0a8faeaa7b70 100644 --- a/arch/mips/pnx8550/common/platform.c +++ b/arch/mips/pnx8550/common/platform.c @@ -20,6 +20,7 @@ #include <linux/serial.h> #include <linux/serial_pnx8xxx.h> #include <linux/platform_device.h> +#include <linux/usb/ohci_pdriver.h> #include <int.h> #include <usb.h> @@ -96,12 +97,40 @@ static u64 ohci_dmamask = DMA_BIT_MASK(32); static u64 uart_dmamask = DMA_BIT_MASK(32); +static int pnx8550_usb_ohci_power_on(struct platform_device *pdev) +{ + /* + * Set register CLK48CTL to enable and 48MHz + */ + outl(0x00000003, PCI_BASE | 0x0004770c); + + /* + * Set register CLK12CTL to enable and 48MHz + */ + outl(0x00000003, PCI_BASE | 0x00047710); + + udelay(100); + + return 0; +} + +static void pnx8550_usb_ohci_power_off(struct platform_device *pdev) +{ + udelay(10); +} + +static struct usb_ohci_pdata pnx8550_usb_ohci_pdata = { + .power_on = pnx8550_usb_ohci_power_on, + .power_off = pnx8550_usb_ohci_power_off, +}; + static struct platform_device pnx8550_usb_ohci_device = { - .name = "pnx8550-ohci", + .name = "ohci-platform", .id = -1, .dev = { .dma_mask = &ohci_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &pnx8550_usb_ohci_pdata, }, .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), .resource = pnx8550_usb_ohci_resources, diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild index 4a159da23633..c5d767028306 100644 --- a/arch/mn10300/include/asm/Kbuild +++ b/arch/mn10300/include/asm/Kbuild @@ -1,3 +1,4 @@ generic-y += clkdev.h generic-y += exec.h +generic-y += trace_clock.h diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile index 966886c8daf5..4739b8302a58 100644 --- a/arch/openrisc/Makefile +++ b/arch/openrisc/Makefile @@ -50,6 +50,6 @@ BUILTIN_DTB := y else BUILTIN_DTB := n endif -core-$(BUILTIN_DTB) += arch/openrisc/boot/ +core-$(BUILTIN_DTB) += arch/openrisc/boot/dts/ all: vmlinux diff --git a/arch/openrisc/boot/Makefile b/arch/openrisc/boot/dts/Makefile index 09958358601a..b092d30d6c23 100644 --- a/arch/openrisc/boot/Makefile +++ b/arch/openrisc/boot/dts/Makefile @@ -1,5 +1,3 @@ - - ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""' BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_OPENRISC_BUILTIN_DTB)).dtb.o else @@ -10,6 +8,3 @@ obj-y += $(BUILTIN_DTB) clean-files := *.dtb.S #DTC_FLAGS ?= -p 1024 - -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild index 78de6805268d..8971026e1c63 100644 --- a/arch/openrisc/include/asm/Kbuild +++ b/arch/openrisc/include/asm/Kbuild @@ -60,6 +60,7 @@ generic-y += swab.h generic-y += termbits.h generic-y += termios.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += ucontext.h generic-y += user.h diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild index bac8debecffb..ff4c9faed546 100644 --- a/arch/parisc/include/asm/Kbuild +++ b/arch/parisc/include/asm/Kbuild @@ -3,3 +3,4 @@ generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \ segment.h topology.h vga.h device.h percpu.h hw_irq.h mutex.h \ div64.h irq_regs.h kdebug.h kvm_para.h local64.h local.h param.h \ poll.h xor.h clkdev.h exec.h +generic-y += trace_clock.h diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h index 054ec06f9e23..66719c38a36b 100644 --- a/arch/parisc/include/uapi/asm/ioctls.h +++ b/arch/parisc/include/uapi/asm/ioctls.h @@ -55,6 +55,9 @@ #define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCVHANGUP 0x5437 +#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ +#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ +#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h index 12219ebce869..294d251ca7b2 100644 --- a/arch/parisc/include/uapi/asm/mman.h +++ b/arch/parisc/include/uapi/asm/mman.h @@ -70,4 +70,15 @@ #define MAP_FILE 0 #define MAP_VARIABLE 0 +/* + * When MAP_HUGETLB is set bits [26:31] encode the log2 of the huge page size. + * This gives us 6 bits, which is enough until someone invents 128 bit address + * spaces. + * + * Assume these are all power of twos. + * When 0 use the default page size. + */ +#define MAP_HUGE_SHIFT 26 +#define MAP_HUGE_MASK 0x3f + #endif /* __PARISC_MMAN_H__ */ diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 88238638aee6..efc5e7d30530 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -186,13 +186,13 @@ static int __init pdc_console_tty_driver_init(void) printk(KERN_INFO "The PDC console driver is still registered, removing CON_BOOT flag\n"); pdc_cons.flags &= ~CON_BOOT; - tty_port_init(&tty_port); - pdc_console_tty_driver = alloc_tty_driver(1); if (!pdc_console_tty_driver) return -ENOMEM; + tty_port_init(&tty_port); + pdc_console_tty_driver->driver_name = "pdc_cons"; pdc_console_tty_driver->name = "ttyB"; pdc_console_tty_driver->major = MUX_MAJOR; @@ -207,6 +207,7 @@ static int __init pdc_console_tty_driver_init(void) err = tty_register_driver(pdc_console_tty_driver); if (err) { printk(KERN_ERR "Unable to register the PDC console TTY driver\n"); + tty_port_destroy(&tty_port); return err; } diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index cb2da96d6ab9..54d950b067b7 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -60,7 +60,7 @@ ENTRY_SAME(fork_wrapper) ENTRY_SAME(read) ENTRY_SAME(write) - ENTRY_SAME(open) /* 5 */ + ENTRY_COMP(open) /* 5 */ ENTRY_SAME(close) ENTRY_SAME(waitpid) ENTRY_SAME(creat) diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild index a4fe15e33c6f..2d62b484b3fc 100644 --- a/arch/powerpc/include/asm/Kbuild +++ b/arch/powerpc/include/asm/Kbuild @@ -2,3 +2,4 @@ generic-y += clkdev.h generic-y += rwsem.h +generic-y += trace_clock.h diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h index 487d46ff68a1..483733bd06d4 100644 --- a/arch/powerpc/include/asm/cputime.h +++ b/arch/powerpc/include/asm/cputime.h @@ -228,6 +228,8 @@ static inline cputime_t clock_t_to_cputime(const unsigned long clk) #define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct)) +static inline void arch_vtime_task_switch(struct task_struct *tsk) { } + #endif /* __KERNEL__ */ #endif /* CONFIG_VIRT_CPU_ACCOUNTING */ #endif /* __POWERPC_CPUTIME_H */ diff --git a/arch/powerpc/include/uapi/asm/ioctls.h b/arch/powerpc/include/uapi/asm/ioctls.h index e9b78870aaab..49a25796a61a 100644 --- a/arch/powerpc/include/uapi/asm/ioctls.h +++ b/arch/powerpc/include/uapi/asm/ioctls.h @@ -97,6 +97,9 @@ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCVHANGUP 0x5437 +#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ +#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ +#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7f94f760dd0c..abc0d0856994 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1428,8 +1428,6 @@ void __init pcibios_resource_survey(void) ppc_md.pcibios_fixup(); } -#ifdef CONFIG_HOTPLUG - /* This is used by the PCI hotplug driver to allocate resource * of newly plugged busses. We can try to consolidate with the * rest of the code later, for now, keep it as-is as our main @@ -1488,8 +1486,6 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); -#endif /* CONFIG_HOTPLUG */ - int pcibios_enable_device(struct pci_dev *dev, int mask) { if (ppc_md.pcibios_enable_device_hook) diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 4ff190ff24a0..2cbe6768fddd 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -74,8 +74,6 @@ static int __init pcibios_init(void) subsys_initcall(pcibios_init); -#ifdef CONFIG_HOTPLUG - int pcibios_unmap_io_space(struct pci_bus *bus) { struct pci_controller *hose; @@ -124,8 +122,6 @@ int pcibios_unmap_io_space(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_unmap_io_space); -#endif /* CONFIG_HOTPLUG */ - static int __devinit pcibios_map_phb_io_space(struct pci_controller *hose) { struct vm_struct *area; diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index a2dc75793bd5..3b997118df50 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -158,10 +158,8 @@ static int do_signal(struct pt_regs *regs) void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) { - if (thread_info_flags & _TIF_UPROBE) { - clear_thread_flag(TIF_UPROBE); + if (thread_info_flags & _TIF_UPROBE) uprobe_notify_resume(regs); - } if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index cf357a059ddb..3ce1f864c2d3 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -607,7 +607,7 @@ static void register_nodes(void) int sysfs_add_device_to_node(struct device *dev, int nid) { - struct node *node = &node_devices[nid]; + struct node *node = node_devices[nid]; return sysfs_create_link(&node->dev.kobj, &dev->kobj, kobject_name(&dev->kobj)); } @@ -615,7 +615,7 @@ EXPORT_SYMBOL_GPL(sysfs_add_device_to_node); void sysfs_remove_device_from_node(struct device *dev, int nid) { - struct node *node = &node_devices[nid]; + struct node *node = node_devices[nid]; sysfs_remove_link(&node->dev.kobj, kobject_name(&dev->kobj)); } EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node); diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index ce4cb772dc78..b3b14352b05e 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -297,6 +297,8 @@ static u64 vtime_delta(struct task_struct *tsk, u64 now, nowscaled, deltascaled; u64 udelta, delta, user_scaled; + WARN_ON_ONCE(!irqs_disabled()); + now = mftb(); nowscaled = read_spurr(now); get_paca()->system_time += now - get_paca()->starttime; @@ -355,15 +357,15 @@ void vtime_account_idle(struct task_struct *tsk) } /* - * Transfer the user and system times accumulated in the paca - * by the exception entry and exit code to the generic process - * user and system time records. + * Transfer the user time accumulated in the paca + * by the exception entry and exit code to the generic + * process user time records. * Must be called with interrupts disabled. - * Assumes that vtime_account() has been called recently - * (i.e. since the last entry from usermode) so that + * Assumes that vtime_account_system/idle() has been called + * recently (i.e. since the last entry from usermode) so that * get_paca()->user_time_scaled is up to date. */ -void account_process_tick(struct task_struct *tsk, int user_tick) +void vtime_account_user(struct task_struct *tsk) { cputime_t utime, utimescaled; @@ -375,12 +377,6 @@ void account_process_tick(struct task_struct *tsk, int user_tick) account_user_time(tsk, utime, utimescaled); } -void vtime_task_switch(struct task_struct *prev) -{ - vtime_account(prev); - account_process_tick(prev, 0); -} - #else /* ! CONFIG_VIRT_CPU_ACCOUNTING */ #define calc_cputime_factors() #endif diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c index d2d46d1014f8..bc77834dbf43 100644 --- a/arch/powerpc/kernel/uprobes.c +++ b/arch/powerpc/kernel/uprobes.c @@ -64,6 +64,8 @@ int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) autask->saved_trap_nr = current->thread.trap_nr; current->thread.trap_nr = UPROBE_TRAP_NR; regs->nip = current->utask->xol_vaddr; + + user_enable_single_step(current); return 0; } @@ -119,6 +121,8 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) * to be executed. */ regs->nip = utask->vaddr + MAX_UINSN_BYTES; + + user_disable_single_step(current); return 0; } @@ -162,6 +166,8 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) current->thread.trap_nr = utask->autask.saved_trap_nr; instruction_pointer_set(regs, utask->vaddr); + + user_disable_single_step(current); } /* diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c index abc8af43ea7c..173568140a32 100644 --- a/arch/powerpc/platforms/cell/celleb_pci.c +++ b/arch/powerpc/platforms/cell/celleb_pci.c @@ -401,11 +401,11 @@ error: } else { if (config && *config) { size = 256; - free_bootmem((unsigned long)(*config), size); + free_bootmem(__pa(*config), size); } if (res && *res) { size = sizeof(struct celleb_pci_resource); - free_bootmem((unsigned long)(*res), size); + free_bootmem(__pa(*res), size); } } diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index b0c3777528a1..d588e48dff74 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -686,7 +686,7 @@ static int pmf_add_functions(struct pmf_device *dev, void *driverdata) int count = 0; for (pp = dev->node->properties; pp != 0; pp = pp->next) { - char *name; + const char *name; if (strncmp(pp->name, PP_PREFIX, plen) != 0) continue; name = pp->name + plen; diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index 45d00e5fe14d..4d806b419606 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -36,7 +36,7 @@ static struct cpuidle_state *cpuidle_state_table; static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before) { - *kt_before = ktime_get_real(); + *kt_before = ktime_get(); *in_purr = mfspr(SPRN_PURR); /* * Indicate to the HV that we are idle. Now would be @@ -50,7 +50,7 @@ static inline s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before) get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr; get_lppaca()->idle = 0; - return ktime_to_us(ktime_sub(ktime_get_real(), kt_before)); + return ktime_to_us(ktime_sub(ktime_get(), kt_before)); } static int snooze_loop(struct cpuidle_device *dev, diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 39f71fba9b38..2f4668136b20 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -281,12 +281,11 @@ static struct property *new_property(const char *name, const int length, if (!new) return NULL; - if (!(new->name = kmalloc(strlen(name) + 1, GFP_KERNEL))) + if (!(new->name = kstrdup(name, GFP_KERNEL))) goto cleanup; if (!(new->value = kmalloc(length + 1, GFP_KERNEL))) goto cleanup; - strcpy(new->name, name); memcpy(new->value, value, length); *(((char *)new->value) + length) = 0; new->length = length; diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index ffb93ae9379b..01b62a62c635 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -136,7 +136,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose, u32 pcicsrbar = 0, pcicsrbar_sz; u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; - char *name = hose->dn->full_name; + const char *name = hose->dn->full_name; const u64 *reg; int len; diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c index 702256a1ca11..9193e12df695 100644 --- a/arch/powerpc/sysdev/scom.c +++ b/arch/powerpc/sysdev/scom.c @@ -157,7 +157,7 @@ static int scom_debug_init_one(struct dentry *root, struct device_node *dn, ent->map = SCOM_MAP_INVALID; spin_lock_init(&ent->lock); snprintf(ent->name, 8, "scom%d", i); - ent->blob.data = dn->full_name; + ent->blob.data = (void*) dn->full_name; ent->blob.size = strlen(dn->full_name); dir = debugfs_create_dir(ent->name, root); diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild index 0633dc6d254d..f313f9cbcf44 100644 --- a/arch/s390/include/asm/Kbuild +++ b/arch/s390/include/asm/Kbuild @@ -1,3 +1,4 @@ generic-y += clkdev.h +generic-y += trace_clock.h diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index 023d5ae24482..d2ff41370c0c 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -14,6 +14,7 @@ #define __ARCH_HAS_VTIME_ACCOUNT +#define __ARCH_HAS_VTIME_TASK_SWITCH /* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */ diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 6d5367060a56..39faa4ac9660 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -158,6 +158,9 @@ static inline int page_reset_referenced(unsigned long addr) * race against modification of the referenced bit. This function * should therefore only be called if it is not mapped in any * address space. + * + * Note that the bit gets set whenever page content is changed. That means + * also when the page is modified by DMA or from inside the kernel. */ #define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY static inline int page_test_and_clear_dirty(unsigned long pfn, int mapped) diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index ad79b846535c..827e094a2f49 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -28,7 +28,7 @@ ENTRY(sys32_open_wrapper) llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int lgfr %r4,%r4 # int - jg sys_open # branch to system call + jg compat_sys_open # branch to system call ENTRY(sys32_close_wrapper) llgfr %r2,%r2 # unsigned int diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 790334427895..e84b8b68444a 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -112,7 +112,12 @@ void vtime_task_switch(struct task_struct *prev) S390_lowcore.system_timer = ti->system_timer; } -void account_process_tick(struct task_struct *tsk, int user_tick) +/* + * In s390, accounting pending user time also implies + * accounting system time in order to correctly compute + * the stolen time accounting. + */ +void vtime_account_user(struct task_struct *tsk) { if (do_account_vtime(tsk, HARDIRQ_OFFSET)) virt_timer_expire(); @@ -127,6 +132,8 @@ void vtime_account(struct task_struct *tsk) struct thread_info *ti = task_thread_info(tsk); u64 timer, system; + WARN_ON_ONCE(!irqs_disabled()); + timer = S390_lowcore.last_update_timer; S390_lowcore.last_update_timer = get_vtimer(); S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer; @@ -140,6 +147,10 @@ void vtime_account(struct task_struct *tsk) } EXPORT_SYMBOL_GPL(vtime_account); +void vtime_account_system(struct task_struct *tsk) +__attribute__((alias("vtime_account"))); +EXPORT_SYMBOL_GPL(vtime_account_system); + void __kprobes vtime_stop_cpu(void) { struct s390_idle_data *idle = &__get_cpu_var(s390_idle); diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index ecced9d18986..d91a95568002 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -608,9 +608,7 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) kvm_s390_deliver_pending_interrupts(vcpu); vcpu->arch.sie_block->icptcode = 0; - local_irq_disable(); kvm_guest_enter(); - local_irq_enable(); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); trace_kvm_s390_sie_enter(vcpu, @@ -629,9 +627,7 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", vcpu->arch.sie_block->icptcode); trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode); - local_irq_disable(); kvm_guest_exit(); - local_irq_enable(); memcpy(&vcpu->run->s.regs.gprs[14], &vcpu->arch.sie_block->gg14, 16); return rc; diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild index ec697aeefd05..16e41fe1a419 100644 --- a/arch/score/include/asm/Kbuild +++ b/arch/score/include/asm/Kbuild @@ -3,3 +3,4 @@ include include/asm-generic/Kbuild.asm header-y += generic-y += clkdev.h +generic-y += trace_clock.h diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index 911e30c9abfd..c6c2becdc8ab 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -112,7 +112,7 @@ CONFIG_USB_MON=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SPI=y CONFIG_MMC_SDHI=y diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig index ed35093e3758..1faa788aecae 100644 --- a/arch/sh/configs/se7724_defconfig +++ b/arch/sh/configs/se7724_defconfig @@ -109,7 +109,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_SPI=y diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index a7e078f2e2e4..81e5dafed3e4 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -319,7 +319,5 @@ EXPORT_SYMBOL(pci_iounmap); #endif /* CONFIG_GENERIC_IOMAP */ -#ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); -#endif diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild index 29f83beeef7a..280bea9e5e2b 100644 --- a/arch/sh/include/asm/Kbuild +++ b/arch/sh/include/asm/Kbuild @@ -31,5 +31,6 @@ generic-y += socket.h generic-y += statfs.h generic-y += termbits.h generic-y += termios.h +generic-y += trace_clock.h generic-y += ucontext.h generic-y += xor.h diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 73a23f4617a3..629db2ad7916 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -382,7 +382,7 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; } #define xlate_dev_kmem_ptr(p) p #define ARCH_HAS_VALID_PHYS_ADDR_RANGE -int valid_phys_addr_range(unsigned long addr, size_t size); +int valid_phys_addr_range(phys_addr_t addr, size_t size); int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); #endif /* __KERNEL__ */ diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h index a6769f352bf6..342241079760 100644 --- a/arch/sh/include/uapi/asm/ioctls.h +++ b/arch/sh/include/uapi/asm/ioctls.h @@ -88,6 +88,9 @@ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCVHANGUP _IO('T', 0x37) +#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ +#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ +#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ #define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ #define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 0c2f1b2c2e19..42d991f632b1 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -20,6 +20,7 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <linux/sh_intc.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/rtc.h> #include <cpu/serial.h> @@ -103,12 +104,15 @@ static struct resource usb_ohci_resources[] = { static u64 usb_ohci_dma_mask = 0xffffffffUL; +static struct usb_ohci_pdata usb_ohci_pdata; + static struct platform_device usb_ohci_device = { - .name = "sh_ohci", + .name = "ohci-platform", .id = -1, .dev = { .dma_mask = &usb_ohci_dma_mask, .coherent_dma_mask = 0xffffffff, + .platform_data = &usb_ohci_pdata, }, .num_resources = ARRAY_SIZE(usb_ohci_resources), .resource = usb_ohci_resources, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index 4a2f357f4df8..9079a0f9ea9b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -19,6 +19,7 @@ #include <linux/sh_timer.h> #include <linux/sh_dma.h> #include <linux/sh_intc.h> +#include <linux/usb/ohci_pdriver.h> #include <cpu/dma-register.h> #include <cpu/sh7757.h> @@ -750,12 +751,15 @@ static struct resource usb_ohci_resources[] = { }, }; +static struct usb_ohci_pdata usb_ohci_pdata; + static struct platform_device usb_ohci_device = { - .name = "sh_ohci", + .name = "ohci-platform", .id = -1, .dev = { .dma_mask = &usb_ohci_device.dev.coherent_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &usb_ohci_pdata, }, .num_resources = ARRAY_SIZE(usb_ohci_resources), .resource = usb_ohci_resources, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index bd0a8fbe610f..1686acaaf45a 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -16,6 +16,7 @@ #include <linux/sh_intc.h> #include <linux/io.h> #include <linux/serial_sci.h> +#include <linux/usb/ohci_pdriver.h> static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe00000, @@ -106,12 +107,15 @@ static struct resource usb_ohci_resources[] = { static u64 usb_ohci_dma_mask = 0xffffffffUL; +static struct usb_ohci_pdata usb_ohci_pdata; + static struct platform_device usb_ohci_device = { - .name = "sh_ohci", + .name = "ohci-platform", .id = -1, .dev = { .dma_mask = &usb_ohci_dma_mask, .coherent_dma_mask = 0xffffffff, + .platform_data = &usb_ohci_pdata, }, .num_resources = ARRAY_SIZE(usb_ohci_resources), .resource = usb_ohci_resources, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 2e6952f87848..ab52d4d4484d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -23,6 +23,7 @@ #include <linux/sh_timer.h> #include <linux/sh_dma.h> #include <linux/sh_intc.h> +#include <linux/usb/ohci_pdriver.h> #include <cpu/dma-register.h> #include <asm/mmzone.h> @@ -583,12 +584,15 @@ static struct resource usb_ohci_resources[] = { }, }; +static struct usb_ohci_pdata usb_ohci_pdata; + static struct platform_device usb_ohci_device = { - .name = "sh_ohci", + .name = "ohci-platform", .id = -1, .dev = { .dma_mask = &usb_ohci_device.dev.coherent_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &usb_ohci_pdata, }, .num_resources = ARRAY_SIZE(usb_ohci_resources), .resource = usb_ohci_resources, diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c index afeb710ec5c3..6777177807c2 100644 --- a/arch/sh/mm/mmap.c +++ b/arch/sh/mm/mmap.c @@ -30,25 +30,13 @@ static inline unsigned long COLOUR_ALIGN(unsigned long addr, return base + off; } -static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, - unsigned long pgoff) -{ - unsigned long base = addr & ~shm_align_mask; - unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask; - - if (base + off <= addr) - return base + off; - - return base - off; -} - unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; - unsigned long start_addr; int do_colour_align; + struct vm_unmapped_area_info info; if (flags & MAP_FIXED) { /* We do not accept a shared mapping if it would violate @@ -79,47 +67,13 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, return addr; } - if (len > mm->cached_hole_size) { - start_addr = addr = mm->free_area_cache; - } else { - mm->cached_hole_size = 0; - start_addr = addr = TASK_UNMAPPED_BASE; - } - -full_search: - if (do_colour_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(mm->free_area_cache); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (unlikely(TASK_SIZE - len < addr)) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (likely(!vma || addr + len <= vma->vm_start)) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - addr = vma->vm_end; - if (do_colour_align) - addr = COLOUR_ALIGN(addr, pgoff); - } + info.flags = 0; + info.length = len; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = TASK_SIZE; + info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); } unsigned long @@ -131,6 +85,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, struct mm_struct *mm = current->mm; unsigned long addr = addr0; int do_colour_align; + struct vm_unmapped_area_info info; if (flags & MAP_FIXED) { /* We do not accept a shared mapping if it would violate @@ -162,73 +117,27 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } - - /* either no address requested or can't fit in requested address hole */ - addr = mm->free_area_cache; - if (do_colour_align) { - unsigned long base = COLOUR_ALIGN_DOWN(addr-len, pgoff); + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + info.align_mask = do_colour_align ? (PAGE_MASK & shm_align_mask) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); - addr = base + len; - } - - /* make sure it can fit in the remaining address space */ - if (likely(addr > len)) { - vma = find_vma(mm, addr-len); - if (!vma || addr <= vma->vm_start) { - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); - } - } - - if (unlikely(mm->mmap_base < len)) - goto bottomup; - - addr = mm->mmap_base-len; - if (do_colour_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - - do { - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (likely(!vma || addr+len <= vma->vm_start)) { - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); - } - - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = vma->vm_start-len; - if (do_colour_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - } while (likely(len < vma->vm_start)); - -bottomup: /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = TASK_SIZE; + addr = vm_unmapped_area(&info); + } return addr; } @@ -238,7 +147,7 @@ bottomup: * You really shouldn't be using read() or write() on /dev/mem. This * might go away in the future. */ -int valid_phys_addr_range(unsigned long addr, size_t count) +int valid_phys_addr_range(phys_addr_t addr, size_t count) { if (addr < __MEMORY_START) return 0; diff --git a/arch/sparc/boot/piggyback.c b/arch/sparc/boot/piggyback.c index c0a798fcf030..bb7c95161d71 100644 --- a/arch/sparc/boot/piggyback.c +++ b/arch/sparc/boot/piggyback.c @@ -81,18 +81,18 @@ static void usage(void) static int start_line(const char *line) { - if (strcmp(line + 8, " T _start\n") == 0) + if (strcmp(line + 10, " _start\n") == 0) return 1; - else if (strcmp(line + 16, " T _start\n") == 0) + else if (strcmp(line + 18, " _start\n") == 0) return 1; return 0; } static int end_line(const char *line) { - if (strcmp(line + 8, " A _end\n") == 0) + if (strcmp(line + 10, " _end\n") == 0) return 1; - else if (strcmp (line + 16, " A _end\n") == 0) + else if (strcmp (line + 18, " _end\n") == 0) return 1; return 0; } @@ -100,8 +100,8 @@ static int end_line(const char *line) /* * Find address for start and end in System.map. * The file looks like this: - * f0004000 T _start - * f0379f79 A _end + * f0004000 ... _start + * f0379f79 ... _end * 1234567890123456 * ^coloumn 1 * There is support for 64 bit addresses too. diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index 645a58da0e86..e26d430ce2fd 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -8,4 +8,5 @@ generic-y += local64.h generic-y += irq_regs.h generic-y += local.h generic-y += module.h +generic-y += trace_clock.h generic-y += word-at-a-time.h diff --git a/arch/sparc/include/uapi/asm/ioctls.h b/arch/sparc/include/uapi/asm/ioctls.h index 9155f7041d44..897d1723fa14 100644 --- a/arch/sparc/include/uapi/asm/ioctls.h +++ b/arch/sparc/include/uapi/asm/ioctls.h @@ -21,6 +21,9 @@ #define TCSETSF2 _IOW('T', 15, struct termios2) #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCVHANGUP _IO('T', 0x37) +#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ +#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ +#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ /* Note that all the ioctls that are not available in Linux have a * double underscore on the front to: a) avoid some programs to diff --git a/arch/sparc/kernel/pci_impl.h b/arch/sparc/kernel/pci_impl.h index 918a2031c8bb..5f688531f48c 100644 --- a/arch/sparc/kernel/pci_impl.h +++ b/arch/sparc/kernel/pci_impl.h @@ -88,7 +88,7 @@ struct pci_pbm_info { int chip_revision; /* Name used for top-level resources. */ - char *name; + const char *name; /* OBP specific information. */ struct platform_device *op; diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S index 44025f4ba41f..8475a474273a 100644 --- a/arch/sparc/kernel/sys32.S +++ b/arch/sparc/kernel/sys32.S @@ -47,7 +47,7 @@ STUB: sra REG1, 0, REG1; \ sra REG4, 0, REG4 SIGN1(sys32_exit, sparc_exit, %o0) -SIGN1(sys32_exit_group, sys_exit_group, %o0) +SIGN1(sys32_exit_group, sparc_exit_group, %o0) SIGN1(sys32_wait4, compat_sys_wait4, %o2) SIGN1(sys32_creat, sys_creat, %o1) SIGN1(sys32_mknod, sys_mknod, %o1) diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c index a8e6eb0a11d5..2da0bdcae52f 100644 --- a/arch/sparc/kernel/sys_sparc_32.c +++ b/arch/sparc/kernel/sys_sparc_32.c @@ -34,11 +34,9 @@ asmlinkage unsigned long sys_getpagesize(void) return PAGE_SIZE; /* Possibly older binaries want 8192 on sun4's? */ } -#define COLOUR_ALIGN(addr) (((addr)+SHMLBA-1)&~(SHMLBA-1)) - unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { - struct vm_area_struct * vmm; + struct vm_unmapped_area_info info; if (flags & MAP_FIXED) { /* We do not accept a shared mapping if it would violate @@ -56,21 +54,14 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi if (!addr) addr = TASK_UNMAPPED_BASE; - if (flags & MAP_SHARED) - addr = COLOUR_ALIGN(addr); - else - addr = PAGE_ALIGN(addr); - - for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { - /* At this point: (!vmm || addr < vmm->vm_end). */ - if (TASK_SIZE - PAGE_SIZE - len < addr) - return -ENOMEM; - if (!vmm || addr + len <= vmm->vm_start) - return addr; - addr = vmm->vm_end; - if (flags & MAP_SHARED) - addr = COLOUR_ALIGN(addr); - } + info.flags = 0; + info.length = len; + info.low_limit = addr; + info.high_limit = TASK_SIZE; + info.align_mask = (flags & MAP_SHARED) ? + (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); } /* diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 51b85feb8b97..708bc29d36a8 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -75,7 +75,7 @@ static inline int invalid_64bit_range(unsigned long addr, unsigned long len) * the spitfire/niagara VA-hole. */ -static inline unsigned long COLOUR_ALIGN(unsigned long addr, +static inline unsigned long COLOR_ALIGN(unsigned long addr, unsigned long pgoff) { unsigned long base = (addr+SHMLBA-1)&~(SHMLBA-1); @@ -84,24 +84,13 @@ static inline unsigned long COLOUR_ALIGN(unsigned long addr, return base + off; } -static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, - unsigned long pgoff) -{ - unsigned long base = addr & ~(SHMLBA-1); - unsigned long off = (pgoff<<PAGE_SHIFT) & (SHMLBA-1); - - if (base + off <= addr) - return base + off; - return base - off; -} - unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { struct mm_struct *mm = current->mm; struct vm_area_struct * vma; unsigned long task_size = TASK_SIZE; - unsigned long start_addr; int do_color_align; + struct vm_unmapped_area_info info; if (flags & MAP_FIXED) { /* We do not accept a shared mapping if it would violate @@ -124,7 +113,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi if (addr) { if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); + addr = COLOR_ALIGN(addr, pgoff); else addr = PAGE_ALIGN(addr); @@ -134,50 +123,22 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi return addr; } - if (len > mm->cached_hole_size) { - start_addr = addr = mm->free_area_cache; - } else { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; + info.flags = 0; + info.length = len; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = min(task_size, VA_EXCLUDE_START); + info.align_mask = do_color_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); + + if ((addr & ~PAGE_MASK) && task_size > VA_EXCLUDE_END) { + VM_BUG_ON(addr != -ENOMEM); + info.low_limit = VA_EXCLUDE_END; + info.high_limit = task_size; + addr = vm_unmapped_area(&info); } - task_size -= len; - -full_search: - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (addr < VA_EXCLUDE_START && - (addr + len) >= VA_EXCLUDE_START) { - addr = VA_EXCLUDE_END; - vma = find_vma(mm, VA_EXCLUDE_END); - } - if (unlikely(task_size < addr)) { - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (likely(!vma || addr + len <= vma->vm_start)) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - addr = vma->vm_end; - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - } + return addr; } unsigned long @@ -190,6 +151,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, unsigned long task_size = STACK_TOP32; unsigned long addr = addr0; int do_color_align; + struct vm_unmapped_area_info info; /* This should only ever run for 32-bit processes. */ BUG_ON(!test_thread_flag(TIF_32BIT)); @@ -214,7 +176,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, /* requesting a specific address */ if (addr) { if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); + addr = COLOR_ALIGN(addr, pgoff); else addr = PAGE_ALIGN(addr); @@ -224,73 +186,27 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } - - /* either no address requested or can't fit in requested address hole */ - addr = mm->free_area_cache; - if (do_color_align) { - unsigned long base = COLOUR_ALIGN_DOWN(addr-len, pgoff); + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + info.align_mask = do_color_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); - addr = base + len; - } - - /* make sure it can fit in the remaining address space */ - if (likely(addr > len)) { - vma = find_vma(mm, addr-len); - if (!vma || addr <= vma->vm_start) { - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); - } - } - - if (unlikely(mm->mmap_base < len)) - goto bottomup; - - addr = mm->mmap_base-len; - if (do_color_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - - do { - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (likely(!vma || addr+len <= vma->vm_start)) { - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); - } - - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = vma->vm_start-len; - if (do_color_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - } while (likely(len < vma->vm_start)); - -bottomup: /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = STACK_TOP32; + addr = vm_unmapped_area(&info); + } return addr; } diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S index 2ef41e67f0be..e0fed7711a94 100644 --- a/arch/sparc/kernel/syscalls.S +++ b/arch/sparc/kernel/syscalls.S @@ -119,10 +119,20 @@ ret_from_syscall: ba,pt %xcc, ret_sys_call mov 0, %o0 + .globl sparc_exit_group + .type sparc_exit_group,#function +sparc_exit_group: + sethi %hi(sys_exit_group), %g7 + ba,pt %xcc, 1f + or %g7, %lo(sys_exit_group), %g7 + .size sparc_exit_group,.-sparc_exit_group + .globl sparc_exit .type sparc_exit,#function sparc_exit: - rdpr %pstate, %g2 + sethi %hi(sys_exit), %g7 + or %g7, %lo(sys_exit), %g7 +1: rdpr %pstate, %g2 wrpr %g2, PSTATE_IE, %pstate rdpr %otherwin, %g1 rdpr %cansave, %g3 @@ -130,7 +140,7 @@ sparc_exit: wrpr %g3, 0x0, %cansave wrpr %g0, 0x0, %otherwin wrpr %g2, 0x0, %pstate - ba,pt %xcc, sys_exit + jmpl %g7, %g0 stb %g0, [%g6 + TI_WSAVED] .size sparc_exit,.-sparc_exit diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index ebb7f5fc58fb..cdbd9b817751 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -133,7 +133,7 @@ sys_call_table: /*170*/ .word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents .word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr /*180*/ .word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall - .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname + .word sys_setpgid, sys_fremovexattr, sys_tkill, sparc_exit_group, sys_newuname /*190*/ .word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl .word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask /*200*/ .word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c index f76f83d5ac63..d2b59441ebdd 100644 --- a/arch/sparc/mm/hugetlbpage.c +++ b/arch/sparc/mm/hugetlbpage.c @@ -30,55 +30,28 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *filp, unsigned long pgoff, unsigned long flags) { - struct mm_struct *mm = current->mm; - struct vm_area_struct * vma; unsigned long task_size = TASK_SIZE; - unsigned long start_addr; + struct vm_unmapped_area_info info; if (test_thread_flag(TIF_32BIT)) task_size = STACK_TOP32; - if (unlikely(len >= VA_EXCLUDE_START)) - return -ENOMEM; - if (len > mm->cached_hole_size) { - start_addr = addr = mm->free_area_cache; - } else { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; + info.flags = 0; + info.length = len; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = min(task_size, VA_EXCLUDE_START); + info.align_mask = PAGE_MASK & ~HPAGE_MASK; + info.align_offset = 0; + addr = vm_unmapped_area(&info); + + if ((addr & ~PAGE_MASK) && task_size > VA_EXCLUDE_END) { + VM_BUG_ON(addr != -ENOMEM); + info.low_limit = VA_EXCLUDE_END; + info.high_limit = task_size; + addr = vm_unmapped_area(&info); } - task_size -= len; - -full_search: - addr = ALIGN(addr, HPAGE_SIZE); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (addr < VA_EXCLUDE_START && - (addr + len) >= VA_EXCLUDE_START) { - addr = VA_EXCLUDE_END; - vma = find_vma(mm, VA_EXCLUDE_END); - } - if (unlikely(task_size < addr)) { - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (likely(!vma || addr + len <= vma->vm_start)) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - addr = ALIGN(vma->vm_end, HPAGE_SIZE); - } + return addr; } static unsigned long @@ -87,71 +60,34 @@ hugetlb_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, const unsigned long pgoff, const unsigned long flags) { - struct vm_area_struct *vma; struct mm_struct *mm = current->mm; unsigned long addr = addr0; + struct vm_unmapped_area_info info; /* This should only ever run for 32-bit processes. */ BUG_ON(!test_thread_flag(TIF_32BIT)); - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } - - /* either no address requested or can't fit in requested address hole */ - addr = mm->free_area_cache & HPAGE_MASK; - - /* make sure it can fit in the remaining address space */ - if (likely(addr > len)) { - vma = find_vma(mm, addr-len); - if (!vma || addr <= vma->vm_start) { - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); - } - } - - if (unlikely(mm->mmap_base < len)) - goto bottomup; - - addr = (mm->mmap_base-len) & HPAGE_MASK; - - do { - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (likely(!vma || addr+len <= vma->vm_start)) { - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); - } - - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = (vma->vm_start-len) & HPAGE_MASK; - } while (likely(len < vma->vm_start)); + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + info.align_mask = PAGE_MASK & ~HPAGE_MASK; + info.align_offset = 0; + addr = vm_unmapped_area(&info); -bottomup: /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = STACK_TOP32; + addr = vm_unmapped_area(&info); + } return addr; } diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild index 6948015e08a2..b17b9b8e53cd 100644 --- a/arch/tile/include/asm/Kbuild +++ b/arch/tile/include/asm/Kbuild @@ -34,5 +34,6 @@ generic-y += sockios.h generic-y += statfs.h generic-y += termbits.h generic-y += termios.h +generic-y += trace_clock.h generic-y += types.h generic-y += xor.h diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c index 812e2d037972..650ccff8378c 100644 --- a/arch/tile/mm/hugetlbpage.c +++ b/arch/tile/mm/hugetlbpage.c @@ -231,42 +231,15 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file, unsigned long pgoff, unsigned long flags) { struct hstate *h = hstate_file(file); - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; - unsigned long start_addr; - - if (len > mm->cached_hole_size) { - start_addr = mm->free_area_cache; - } else { - start_addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - } - -full_search: - addr = ALIGN(start_addr, huge_page_size(h)); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (TASK_SIZE - len < addr) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (!vma || addr + len <= vma->vm_start) { - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - addr = ALIGN(vma->vm_end, huge_page_size(h)); - } + struct vm_unmapped_area_info info; + + info.flags = 0; + info.length = len; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = TASK_SIZE; + info.align_mask = PAGE_MASK & ~huge_page_mask(h); + info.align_offset = 0; + return vm_unmapped_area(&info); } static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file, @@ -274,92 +247,30 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long pgoff, unsigned long flags) { struct hstate *h = hstate_file(file); - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma, *prev_vma; - unsigned long base = mm->mmap_base, addr = addr0; - unsigned long largest_hole = mm->cached_hole_size; - int first_time = 1; - - /* don't allow allocations above current base */ - if (mm->free_area_cache > base) - mm->free_area_cache = base; - - if (len <= largest_hole) { - largest_hole = 0; - mm->free_area_cache = base; - } -try_again: - /* make sure it can fit in the remaining address space */ - if (mm->free_area_cache < len) - goto fail; - - /* either no address requested or can't fit in requested address hole */ - addr = (mm->free_area_cache - len) & huge_page_mask(h); - do { - /* - * Lookup failure means no vma is above this address, - * i.e. return with success: - */ - vma = find_vma_prev(mm, addr, &prev_vma); - if (!vma) { - return addr; - break; - } - - /* - * new region fits between prev_vma->vm_end and - * vma->vm_start, use it: - */ - if (addr + len <= vma->vm_start && - (!prev_vma || (addr >= prev_vma->vm_end))) { - /* remember the address as a hint for next time */ - mm->cached_hole_size = largest_hole; - mm->free_area_cache = addr; - return addr; - } else { - /* pull free_area_cache down to the first hole */ - if (mm->free_area_cache == vma->vm_end) { - mm->free_area_cache = vma->vm_start; - mm->cached_hole_size = largest_hole; - } - } + struct vm_unmapped_area_info info; + unsigned long addr; - /* remember the largest hole we saw so far */ - if (addr + largest_hole < vma->vm_start) - largest_hole = vma->vm_start - addr; + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = current->mm->mmap_base; + info.align_mask = PAGE_MASK & ~huge_page_mask(h); + info.align_offset = 0; + addr = vm_unmapped_area(&info); - /* try just below the current vma->vm_start */ - addr = (vma->vm_start - len) & huge_page_mask(h); - - } while (len <= vma->vm_start); - -fail: - /* - * if hint left us with no space for the requested - * mapping then try again: - */ - if (first_time) { - mm->free_area_cache = base; - largest_hole = 0; - first_time = 0; - goto try_again; - } /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->free_area_cache = TASK_UNMAPPED_BASE; - mm->cached_hole_size = ~0UL; - addr = hugetlb_get_unmapped_area_bottomup(file, addr0, - len, pgoff, flags); - - /* - * Restore the topdown base: - */ - mm->free_area_cache = base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = TASK_SIZE; + addr = vm_unmapped_area(&info); + } return addr; } diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index c3bba73e4be6..e9a0abc6a32f 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -83,21 +83,8 @@ static const struct chan_ops not_configged_ops = { static void tty_receive_char(struct tty_struct *tty, char ch) { - if (tty == NULL) - return; - - if (I_IXON(tty) && !I_IXOFF(tty) && !tty->raw) { - if (ch == STOP_CHAR(tty)) { - stop_tty(tty); - return; - } - else if (ch == START_CHAR(tty)) { - start_tty(tty); - return; - } - } - - tty_insert_flip_char(tty, ch, TTY_NORMAL); + if (tty) + tty_insert_flip_char(tty, ch, TTY_NORMAL); } static int open_one_chan(struct chan *chan) diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index fd9a15b318af..9ffc28bd4b7a 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -584,6 +584,8 @@ int register_lines(struct line_driver *line_driver, printk(KERN_ERR "register_lines : can't register %s driver\n", line_driver->name); put_tty_driver(driver); + for (i = 0; i < nlines; i++) + tty_port_destroy(&lines[i].port); return err; } diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 79ccfe6c7078..49e3b49e552f 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -648,7 +648,7 @@ static void stack_proc(void *arg) struct task_struct *from = current, *to = arg; to->thread.saved_task = from; - rcu_switch(from, to); + rcu_user_hooks_switch(from, to); switch_to(from, to, from); } diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild index 0f6e7b328265..b30f34a79882 100644 --- a/arch/um/include/asm/Kbuild +++ b/arch/um/include/asm/Kbuild @@ -2,3 +2,4 @@ generic-y += bug.h cputime.h device.h emergency-restart.h futex.h hardirq.h generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h exec.h generic-y += switch_to.h clkdev.h +generic-y += trace_clock.h diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild index 601e92f18af6..89d8b6c4e39a 100644 --- a/arch/unicore32/include/asm/Kbuild +++ b/arch/unicore32/include/asm/Kbuild @@ -53,6 +53,7 @@ generic-y += syscalls.h generic-y += termbits.h generic-y += termios.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += ucontext.h generic-y += unaligned.h diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c index b0056f68d321..7c4359240b81 100644 --- a/arch/unicore32/kernel/pci.c +++ b/arch/unicore32/kernel/pci.c @@ -250,9 +250,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); } -#ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_fixup_bus); -#endif static int __init pci_common_init(void) { diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0df6e7d84539..9195fd80e11e 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -69,8 +69,8 @@ config X86 select HAVE_PERF_USER_STACK_DUMP select HAVE_DEBUG_KMEMLEAK select ANON_INODES - select HAVE_ALIGNED_STRUCT_PAGE if SLUB && !M386 - select HAVE_CMPXCHG_LOCAL if !M386 + select HAVE_ALIGNED_STRUCT_PAGE if SLUB + select HAVE_CMPXCHG_LOCAL select HAVE_CMPXCHG_DOUBLE select HAVE_ARCH_KMEMCHECK select HAVE_USER_RETURN_NOTIFIER @@ -106,7 +106,7 @@ config X86 select KTIME_SCALAR if X86_32 select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER - select HAVE_RCU_USER_QS if X86_64 + select HAVE_CONTEXT_TRACKING if X86_64 select HAVE_IRQ_TIME_ACCOUNTING select GENERIC_KERNEL_THREAD select GENERIC_KERNEL_EXECVE @@ -172,13 +172,8 @@ config ARCH_MAY_HAVE_PC_FDC def_bool y depends on ISA_DMA_API -config RWSEM_GENERIC_SPINLOCK - def_bool y - depends on !X86_XADD - config RWSEM_XCHGADD_ALGORITHM def_bool y - depends on X86_XADD config GENERIC_CALIBRATE_DELAY def_bool y @@ -311,7 +306,7 @@ config X86_X2APIC If you don't know what to do here, say N. config X86_MPPARSE - bool "Enable MPS table" if ACPI + bool "Enable MPS table" if ACPI || SFI default y depends on X86_LOCAL_APIC ---help--- @@ -1101,7 +1096,7 @@ config HIGHMEM4G config HIGHMEM64G bool "64GB" - depends on !M386 && !M486 + depends on !M486 select X86_PAE ---help--- Select this if you have a 32-bit processor and more than 4 @@ -1699,6 +1694,50 @@ config HOTPLUG_CPU automatically on SMP systems. ) Say N if you want to disable CPU hotplug. +config BOOTPARAM_HOTPLUG_CPU0 + bool "Set default setting of cpu0_hotpluggable" + default n + depends on HOTPLUG_CPU && EXPERIMENTAL + ---help--- + Set whether default state of cpu0_hotpluggable is on or off. + + Say Y here to enable CPU0 hotplug by default. If this switch + is turned on, there is no need to give cpu0_hotplug kernel + parameter and the CPU0 hotplug feature is enabled by default. + + Please note: there are two known CPU0 dependencies if you want + to enable the CPU0 hotplug feature either by this switch or by + cpu0_hotplug kernel parameter. + + First, resume from hibernate or suspend always starts from CPU0. + So hibernate and suspend are prevented if CPU0 is offline. + + Second dependency is PIC interrupts always go to CPU0. CPU0 can not + offline if any interrupt can not migrate out of CPU0. There may + be other CPU0 dependencies. + + Please make sure the dependencies are under your control before + you enable this feature. + + Say N if you don't want to enable CPU0 hotplug feature by default. + You still can enable the CPU0 hotplug feature at boot by kernel + parameter cpu0_hotplug. + +config DEBUG_HOTPLUG_CPU0 + def_bool n + prompt "Debug CPU0 hotplug" + depends on HOTPLUG_CPU && EXPERIMENTAL + ---help--- + Enabling this option offlines CPU0 (if CPU0 can be offlined) as + soon as possible and boots up userspace with CPU0 offlined. User + can online CPU0 back after boot time. + + To debug CPU0 hotplug, you need to enable CPU0 offline/online + feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during + compilation or giving cpu0_hotplug kernel parameter at boot. + + If unsure, say N. + config COMPAT_VDSO def_bool y prompt "Compat VDSO support" diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index f3b86d0df44e..c026cca5602c 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -4,23 +4,24 @@ choice default M686 if X86_32 default GENERIC_CPU if X86_64 -config M386 - bool "386" - depends on X86_32 && !UML +config M486 + bool "486" + depends on X86_32 ---help--- - This is the processor type of your CPU. This information is used for - optimizing purposes. In order to compile a kernel that can run on - all x86 CPU types (albeit not optimally fast), you can specify - "386" here. + This is the processor type of your CPU. This information is + used for optimizing purposes. In order to compile a kernel + that can run on all supported x86 CPU types (albeit not + optimally fast), you can specify "486" here. + + Note that the 386 is no longer supported, this includes + AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI 486DLC/DLC2, + UMC 486SX-S and the NexGen Nx586. The kernel will not necessarily run on earlier architectures than the one you have chosen, e.g. a Pentium optimized kernel will run on a PPro, but not necessarily on a i486. Here are the settings recommended for greatest speed: - - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI - 486DLC/DLC2, and UMC 486SX-S. Only "386" kernels will run on a 386 - class machine. - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. - "586" for generic Pentium CPUs lacking the TSC @@ -43,16 +44,7 @@ config M386 - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above). - "VIA C7" for VIA C7. - If you don't know what to do, choose "386". - -config M486 - bool "486" - depends on X86_32 - ---help--- - Select this for a 486 series processor, either Intel or one of the - compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, - DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or - U5S. + If you don't know what to do, choose "486". config M586 bool "586/K5/5x86/6x86/6x86MX" @@ -305,24 +297,16 @@ config X86_INTERNODE_CACHE_SHIFT default "12" if X86_VSMP default X86_L1_CACHE_SHIFT -config X86_CMPXCHG - def_bool y - depends on X86_64 || (X86_32 && !M386) - config X86_L1_CACHE_SHIFT int default "7" if MPENTIUM4 || MPSC default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU - default "4" if MELAN || M486 || M386 || MGEODEGX1 + default "4" if MELAN || M486 || MGEODEGX1 default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX -config X86_XADD - def_bool y - depends on !M386 - config X86_PPRO_FENCE bool "PentiumPro memory ordering errata workaround" - depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 + depends on M686 || M586MMX || M586TSC || M586 || M486 || MGEODEGX1 ---help--- Old PentiumPro multiprocessor systems had errata that could cause memory operations to violate the x86 ordering standard in rare cases. @@ -335,27 +319,11 @@ config X86_PPRO_FENCE config X86_F00F_BUG def_bool y - depends on M586MMX || M586TSC || M586 || M486 || M386 + depends on M586MMX || M586TSC || M586 || M486 config X86_INVD_BUG def_bool y - depends on M486 || M386 - -config X86_WP_WORKS_OK - def_bool y - depends on !M386 - -config X86_INVLPG - def_bool y - depends on X86_32 && !M386 - -config X86_BSWAP - def_bool y - depends on X86_32 && !M386 - -config X86_POPAD_OK - def_bool y - depends on X86_32 && !M386 + depends on M486 config X86_ALIGNMENT_16 def_bool y @@ -412,12 +380,11 @@ config X86_MINIMUM_CPU_FAMILY default "64" if X86_64 default "6" if X86_32 && X86_P6_NOP default "5" if X86_32 && X86_CMPXCHG64 - default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK) - default "3" + default "4" config X86_DEBUGCTLMSR def_bool y - depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386) && !UML + depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486) && !UML menuconfig PROCESSOR_SELECT bool "Supported processor vendors" if EXPERT @@ -441,7 +408,7 @@ config CPU_SUP_INTEL config CPU_SUP_CYRIX_32 default y bool "Support Cyrix processors" if PROCESSOR_SELECT - depends on M386 || M486 || M586 || M586TSC || M586MMX || (EXPERT && !64BIT) + depends on M486 || M586 || M586TSC || M586MMX || (EXPERT && !64BIT) ---help--- This enables detection, tunings and quirks for Cyrix processors @@ -495,7 +462,7 @@ config CPU_SUP_TRANSMETA_32 config CPU_SUP_UMC_32 default y bool "Support UMC processors" if PROCESSOR_SELECT - depends on M386 || M486 || (EXPERT && !64BIT) + depends on M486 || (EXPERT && !64BIT) ---help--- This enables detection, tunings and quirks for UMC processors diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu index 86cee7b749e1..6647ed49c66c 100644 --- a/arch/x86/Makefile_32.cpu +++ b/arch/x86/Makefile_32.cpu @@ -10,7 +10,6 @@ tune = $(call cc-option,-mcpu=$(1),$(2)) endif align := $(cc-option-align) -cflags-$(CONFIG_M386) += -march=i386 cflags-$(CONFIG_M486) += -march=i486 cflags-$(CONFIG_M586) += -march=i586 cflags-$(CONFIG_M586TSC) += -march=i586 diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild index 66e5f0ef0523..79fd8a3418f9 100644 --- a/arch/x86/include/asm/Kbuild +++ b/arch/x86/include/asm/Kbuild @@ -12,6 +12,7 @@ header-y += mce.h header-y += msr-index.h header-y += msr.h header-y += mtrr.h +header-y += perf_regs.h header-y += posix_types_32.h header-y += posix_types_64.h header-y += posix_types_x32.h @@ -19,8 +20,10 @@ header-y += prctl.h header-y += processor-flags.h header-y += ptrace-abi.h header-y += sigcontext32.h +header-y += svm.h header-y += ucontext.h header-y += vm86.h +header-y += vmx.h header-y += vsyscall.h genhdr-y += unistd_32.h diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h index b6c3b821acf6..722aa3b04624 100644 --- a/arch/x86/include/asm/atomic.h +++ b/arch/x86/include/asm/atomic.h @@ -172,23 +172,7 @@ static inline int atomic_add_negative(int i, atomic_t *v) */ static inline int atomic_add_return(int i, atomic_t *v) { -#ifdef CONFIG_M386 - int __i; - unsigned long flags; - if (unlikely(boot_cpu_data.x86 <= 3)) - goto no_xadd; -#endif - /* Modern 486+ processor */ return i + xadd(&v->counter, i); - -#ifdef CONFIG_M386 -no_xadd: /* Legacy 386 processor */ - raw_local_irq_save(flags); - __i = atomic_read(v); - atomic_set(v, i + __i); - raw_local_irq_restore(flags); - return i + __i; -#endif } /** diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h index 53f4b219336b..f8bf2eecab86 100644 --- a/arch/x86/include/asm/cmpxchg_32.h +++ b/arch/x86/include/asm/cmpxchg_32.h @@ -34,9 +34,7 @@ static inline void set_64bit(volatile u64 *ptr, u64 value) : "memory"); } -#ifdef CONFIG_X86_CMPXCHG #define __HAVE_ARCH_CMPXCHG 1 -#endif #ifdef CONFIG_X86_CMPXCHG64 #define cmpxchg64(ptr, o, n) \ @@ -73,59 +71,6 @@ static inline u64 __cmpxchg64_local(volatile u64 *ptr, u64 old, u64 new) return prev; } -#ifndef CONFIG_X86_CMPXCHG -/* - * Building a kernel capable running on 80386. It may be necessary to - * simulate the cmpxchg on the 80386 CPU. For that purpose we define - * a function for each of the sizes we support. - */ - -extern unsigned long cmpxchg_386_u8(volatile void *, u8, u8); -extern unsigned long cmpxchg_386_u16(volatile void *, u16, u16); -extern unsigned long cmpxchg_386_u32(volatile void *, u32, u32); - -static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 1: - return cmpxchg_386_u8(ptr, old, new); - case 2: - return cmpxchg_386_u16(ptr, old, new); - case 4: - return cmpxchg_386_u32(ptr, old, new); - } - return old; -} - -#define cmpxchg(ptr, o, n) \ -({ \ - __typeof__(*(ptr)) __ret; \ - if (likely(boot_cpu_data.x86 > 3)) \ - __ret = (__typeof__(*(ptr)))__cmpxchg((ptr), \ - (unsigned long)(o), (unsigned long)(n), \ - sizeof(*(ptr))); \ - else \ - __ret = (__typeof__(*(ptr)))cmpxchg_386((ptr), \ - (unsigned long)(o), (unsigned long)(n), \ - sizeof(*(ptr))); \ - __ret; \ -}) -#define cmpxchg_local(ptr, o, n) \ -({ \ - __typeof__(*(ptr)) __ret; \ - if (likely(boot_cpu_data.x86 > 3)) \ - __ret = (__typeof__(*(ptr)))__cmpxchg_local((ptr), \ - (unsigned long)(o), (unsigned long)(n), \ - sizeof(*(ptr))); \ - else \ - __ret = (__typeof__(*(ptr)))cmpxchg_386((ptr), \ - (unsigned long)(o), (unsigned long)(n), \ - sizeof(*(ptr))); \ - __ret; \ -}) -#endif - #ifndef CONFIG_X86_CMPXCHG64 /* * Building a kernel capable running on 80386 and 80486. It may be necessary diff --git a/arch/x86/include/asm/rcu.h b/arch/x86/include/asm/context_tracking.h index d1ac07a23979..1616562683e9 100644 --- a/arch/x86/include/asm/rcu.h +++ b/arch/x86/include/asm/context_tracking.h @@ -1,27 +1,26 @@ -#ifndef _ASM_X86_RCU_H -#define _ASM_X86_RCU_H +#ifndef _ASM_X86_CONTEXT_TRACKING_H +#define _ASM_X86_CONTEXT_TRACKING_H #ifndef __ASSEMBLY__ - -#include <linux/rcupdate.h> +#include <linux/context_tracking.h> #include <asm/ptrace.h> static inline void exception_enter(struct pt_regs *regs) { - rcu_user_exit(); + user_exit(); } static inline void exception_exit(struct pt_regs *regs) { -#ifdef CONFIG_RCU_USER_QS +#ifdef CONFIG_CONTEXT_TRACKING if (user_mode(regs)) - rcu_user_enter(); + user_enter(); #endif } #else /* __ASSEMBLY__ */ -#ifdef CONFIG_RCU_USER_QS +#ifdef CONFIG_CONTEXT_TRACKING # define SCHEDULE_USER call schedule_user #else # define SCHEDULE_USER call schedule diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 4564c8e28a33..5f9a1243190e 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -28,6 +28,10 @@ struct x86_cpu { #ifdef CONFIG_HOTPLUG_CPU extern int arch_register_cpu(int num); extern void arch_unregister_cpu(int); +extern void __cpuinit start_cpu0(void); +#ifdef CONFIG_DEBUG_HOTPLUG_CPU0 +extern int _debug_hotplug_cpu(int cpu, int action); +#endif #endif DECLARE_PER_CPU(int, cpu_state); diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 8c297aa53eef..da40b1e2228e 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -311,12 +311,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_cx8 boot_cpu_has(X86_FEATURE_CX8) #define cpu_has_cx16 boot_cpu_has(X86_FEATURE_CX16) #define cpu_has_eager_fpu boot_cpu_has(X86_FEATURE_EAGER_FPU) - -#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) -# define cpu_has_invlpg 1 -#else -# define cpu_has_invlpg (boot_cpu_data.x86 > 3) -#endif +#define cpu_has_topoext boot_cpu_has(X86_FEATURE_TOPOEXT) #ifdef CONFIG_X86_64 diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h index 93e1c55f14ab..03dd72957d2f 100644 --- a/arch/x86/include/asm/device.h +++ b/arch/x86/include/asm/device.h @@ -2,9 +2,6 @@ #define _ASM_X86_DEVICE_H struct dev_archdata { -#ifdef CONFIG_ACPI - void *acpi_handle; -#endif #ifdef CONFIG_X86_DEV_DMA_OPS struct dma_map_ops *dma_ops; #endif diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h index 5939f44fe0c0..9c999c1674fa 100644 --- a/arch/x86/include/asm/elf.h +++ b/arch/x86/include/asm/elf.h @@ -354,12 +354,10 @@ static inline int mmap_is_ia32(void) return 0; } -/* The first two values are special, do not change. See align_addr() */ +/* Do not change the values. See get_align_mask() */ enum align_flags { ALIGN_VA_32 = BIT(0), ALIGN_VA_64 = BIT(1), - ALIGN_VDSO = BIT(2), - ALIGN_TOPDOWN = BIT(3), }; struct va_alignment { @@ -368,5 +366,5 @@ struct va_alignment { } ____cacheline_aligned; extern struct va_alignment va_align; -extern unsigned long align_addr(unsigned long, struct file *, enum align_flags); +extern unsigned long align_vdso_addr(unsigned long); #endif /* _ASM_X86_ELF_H */ diff --git a/arch/x86/include/asm/fpu-internal.h b/arch/x86/include/asm/fpu-internal.h index 831dbb9c6c02..41ab26ea6564 100644 --- a/arch/x86/include/asm/fpu-internal.h +++ b/arch/x86/include/asm/fpu-internal.h @@ -399,14 +399,17 @@ static inline void drop_init_fpu(struct task_struct *tsk) typedef struct { int preload; } fpu_switch_t; /* - * FIXME! We could do a totally lazy restore, but we need to - * add a per-cpu "this was the task that last touched the FPU - * on this CPU" variable, and the task needs to have a "I last - * touched the FPU on this CPU" and check them. + * Must be run with preemption disabled: this clears the fpu_owner_task, + * on this CPU. * - * We don't do that yet, so "fpu_lazy_restore()" always returns - * false, but some day.. + * This will disable any lazy FPU state restore of the current FPU state, + * but if the current thread owns the FPU, it will still be saved by. */ +static inline void __cpu_disable_lazy_restore(unsigned int cpu) +{ + per_cpu(fpu_owner_task, cpu) = NULL; +} + static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu) { return new == this_cpu_read_stable(fpu_owner_task) && diff --git a/arch/x86/include/asm/futex.h b/arch/x86/include/asm/futex.h index f373046e63ec..be27ba1e947a 100644 --- a/arch/x86/include/asm/futex.h +++ b/arch/x86/include/asm/futex.h @@ -55,12 +55,6 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; -#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP) - /* Real i386 machines can only support FUTEX_OP_SET */ - if (op != FUTEX_OP_SET && boot_cpu_data.x86 == 3) - return -ENOSYS; -#endif - pagefault_disable(); switch (op) { @@ -118,12 +112,6 @@ static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, { int ret = 0; -#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP) - /* Real i386 machines have no cmpxchg instruction */ - if (boot_cpu_data.x86 == 3) - return -ENOSYS; -#endif - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; diff --git a/arch/x86/include/asm/local.h b/arch/x86/include/asm/local.h index c8bed0da434a..2d89e3980cbd 100644 --- a/arch/x86/include/asm/local.h +++ b/arch/x86/include/asm/local.h @@ -124,27 +124,11 @@ static inline int local_add_negative(long i, local_t *l) */ static inline long local_add_return(long i, local_t *l) { - long __i; -#ifdef CONFIG_M386 - unsigned long flags; - if (unlikely(boot_cpu_data.x86 <= 3)) - goto no_xadd; -#endif - /* Modern 486+ processor */ - __i = i; + long __i = i; asm volatile(_ASM_XADD "%0, %1;" : "+r" (i), "+m" (l->a.counter) : : "memory"); return i + __i; - -#ifdef CONFIG_M386 -no_xadd: /* Legacy 386 processor */ - local_irq_save(flags); - __i = local_read(l); - local_set(l, i + __i); - local_irq_restore(flags); - return i + __i; -#endif } static inline long local_sub_return(long i, local_t *l) diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h index 593e51d4643f..513b05f15bb4 100644 --- a/arch/x86/include/asm/mman.h +++ b/arch/x86/include/asm/mman.h @@ -3,6 +3,9 @@ #define MAP_32BIT 0x40 /* only give out 32bit addresses */ +#define MAP_HUGE_2MB (21 << MAP_HUGE_SHIFT) +#define MAP_HUGE_1GB (30 << MAP_HUGE_SHIFT) + #include <asm-generic/mman.h> #endif /* _ASM_X86_MMAN_H */ diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h index 9eae7752ae9b..e3b7819caeef 100644 --- a/arch/x86/include/asm/module.h +++ b/arch/x86/include/asm/module.h @@ -5,8 +5,6 @@ #ifdef CONFIG_X86_64 /* X86_64 does not define MODULE_PROC_FAMILY */ -#elif defined CONFIG_M386 -#define MODULE_PROC_FAMILY "386 " #elif defined CONFIG_M486 #define MODULE_PROC_FAMILY "486 " #elif defined CONFIG_M586 diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 7f0edceb7563..e400cdb2dd65 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -337,6 +337,8 @@ #define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38) #define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39) +#define MSR_IA32_TSC_DEADLINE 0x000006E0 + /* P4/Xeon+ specific */ #define MSR_IA32_MCG_EAX 0x00000180 #define MSR_IA32_MCG_EBX 0x00000181 diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 1104afaba52b..0da5200ee79d 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -406,7 +406,6 @@ do { \ #define this_cpu_xchg_2(pcp, nval) percpu_xchg_op(pcp, nval) #define this_cpu_xchg_4(pcp, nval) percpu_xchg_op(pcp, nval) -#ifndef CONFIG_M386 #define __this_cpu_add_return_1(pcp, val) percpu_add_return_op(pcp, val) #define __this_cpu_add_return_2(pcp, val) percpu_add_return_op(pcp, val) #define __this_cpu_add_return_4(pcp, val) percpu_add_return_op(pcp, val) @@ -421,8 +420,6 @@ do { \ #define this_cpu_cmpxchg_2(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) #define this_cpu_cmpxchg_4(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) -#endif /* !CONFIG_M386 */ - #ifdef CONFIG_X86_CMPXCHG64 #define percpu_cmpxchg8b_double(pcp1, pcp2, o1, o2, n1, n2) \ ({ \ diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 92f48a5a6b2e..888184b2fc85 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -185,7 +185,7 @@ extern void print_cpu_info(struct cpuinfo_x86 *); void print_cpu_msr(struct cpuinfo_x86 *); extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c); extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c); -extern unsigned short num_cache_leaves; +extern void init_amd_cacheinfo(struct cpuinfo_x86 *c); extern void detect_extended_topology(struct cpuinfo_x86 *c); extern void detect_ht(struct cpuinfo_x86 *c); @@ -670,18 +670,29 @@ static inline void sync_core(void) { int tmp; -#if defined(CONFIG_M386) || defined(CONFIG_M486) - if (boot_cpu_data.x86 < 5) - /* There is no speculative execution. - * jmp is a barrier to prefetching. */ - asm volatile("jmp 1f\n1:\n" ::: "memory"); - else +#ifdef CONFIG_M486 + /* + * Do a CPUID if available, otherwise do a jump. The jump + * can conveniently enough be the jump around CPUID. + */ + asm volatile("cmpl %2,%1\n\t" + "jl 1f\n\t" + "cpuid\n" + "1:" + : "=a" (tmp) + : "rm" (boot_cpu_data.cpuid_level), "ri" (0), "0" (1) + : "ebx", "ecx", "edx", "memory"); +#else + /* + * CPUID is a barrier to speculative execution. + * Prefetched instructions are automatically + * invalidated when modified. + */ + asm volatile("cpuid" + : "=a" (tmp) + : "0" (1) + : "ebx", "ecx", "edx", "memory"); #endif - /* cpuid is a barrier to speculative execution. - * Prefetched instructions are automatically - * invalidated when modified. */ - asm volatile("cpuid" : "=a" (tmp) : "0" (1) - : "ebx", "ecx", "edx", "memory"); } static inline void __monitor(const void *eax, unsigned long ecx, diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index 19f16ebaf4fa..54d80fddb739 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -239,6 +239,15 @@ static inline unsigned long regs_get_register(struct pt_regs *regs, { if (unlikely(offset > MAX_REG_OFFSET)) return 0; +#ifdef CONFIG_X86_32 + /* + * Traps from the kernel do not save sp and ss. + * Use the helper function to retrieve sp. + */ + if (offset == offsetof(struct pt_regs, sp) && + regs->cs == __KERNEL_CS) + return kernel_stack_pointer(regs); +#endif return *(unsigned long *)((unsigned long)regs + offset); } diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 4f19a1526037..b073aaea747c 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -166,6 +166,7 @@ void native_send_call_func_ipi(const struct cpumask *mask); void native_send_call_func_single_ipi(int cpu); void x86_idle_thread_init(unsigned int cpu, struct task_struct *idle); +void smp_store_boot_cpu_info(void); void smp_store_cpu_info(int id); #define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu) diff --git a/arch/x86/include/asm/swab.h b/arch/x86/include/asm/swab.h index 557cd9f00661..7f235c7105c1 100644 --- a/arch/x86/include/asm/swab.h +++ b/arch/x86/include/asm/swab.h @@ -6,22 +6,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 val) { -#ifdef __i386__ -# ifdef CONFIG_X86_BSWAP - asm("bswap %0" : "=r" (val) : "0" (val)); -# else - asm("xchgb %b0,%h0\n\t" /* swap lower bytes */ - "rorl $16,%0\n\t" /* swap words */ - "xchgb %b0,%h0" /* swap higher bytes */ - : "=q" (val) - : "0" (val)); -# endif - -#else /* __i386__ */ - asm("bswapl %0" - : "=r" (val) - : "0" (val)); -#endif + asm("bswapl %0" : "=r" (val) : "0" (val)); return val; } #define __arch_swab32 __arch_swab32 @@ -37,22 +22,12 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 val) __u64 u; } v; v.u = val; -# ifdef CONFIG_X86_BSWAP asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1" : "=r" (v.s.a), "=r" (v.s.b) : "0" (v.s.a), "1" (v.s.b)); -# else - v.s.a = __arch_swab32(v.s.a); - v.s.b = __arch_swab32(v.s.b); - asm("xchgl %0,%1" - : "=r" (v.s.a), "=r" (v.s.b) - : "0" (v.s.a), "1" (v.s.b)); -# endif return v.u; #else /* __i386__ */ - asm("bswapq %0" - : "=r" (val) - : "0" (val)); + asm("bswapq %0" : "=r" (val) : "0" (val)); return val; #endif } diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index 74a44333545a..0fee48e279cc 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -56,10 +56,7 @@ static inline void __flush_tlb_all(void) static inline void __flush_tlb_one(unsigned long addr) { - if (cpu_has_invlpg) __flush_tlb_single(addr); - else - __flush_tlb(); } #define TLB_FLUSH_ALL -1UL diff --git a/arch/x86/include/asm/trace_clock.h b/arch/x86/include/asm/trace_clock.h new file mode 100644 index 000000000000..beab86cc282d --- /dev/null +++ b/arch/x86/include/asm/trace_clock.h @@ -0,0 +1,20 @@ +#ifndef _ASM_X86_TRACE_CLOCK_H +#define _ASM_X86_TRACE_CLOCK_H + +#include <linux/compiler.h> +#include <linux/types.h> + +#ifdef CONFIG_X86_TSC + +extern u64 notrace trace_clock_x86_tsc(void); + +# define ARCH_TRACE_CLOCKS \ + { trace_clock_x86_tsc, "x86-tsc", .in_ns = 0 }, + +#else /* !CONFIG_X86_TSC */ + +#define ARCH_TRACE_CLOCKS + +#endif + +#endif /* _ASM_X86_TRACE_CLOCK_H */ diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index 7ccf8d131535..1709801d18ec 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -237,8 +237,6 @@ extern void __put_user_2(void); extern void __put_user_4(void); extern void __put_user_8(void); -#ifdef CONFIG_X86_WP_WORKS_OK - /** * put_user: - Write a simple value into user space. * @x: Value to copy to user space. @@ -326,29 +324,6 @@ do { \ } \ } while (0) -#else - -#define __put_user_size(x, ptr, size, retval, errret) \ -do { \ - __typeof__(*(ptr))__pus_tmp = x; \ - retval = 0; \ - \ - if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \ - retval = errret; \ -} while (0) - -#define put_user(x, ptr) \ -({ \ - int __ret_pu; \ - __typeof__(*(ptr))__pus_tmp = x; \ - __ret_pu = 0; \ - if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \ - sizeof(*(ptr))) != 0)) \ - __ret_pu = -EFAULT; \ - __ret_pu; \ -}) -#endif - #ifdef CONFIG_X86_32 #define __get_user_asm_u64(x, ptr, retval, errret) (x) = __get_user_bad() #define __get_user_asm_ex_u64(x, ptr) (x) = __get_user_bad() @@ -543,29 +518,12 @@ struct __large_struct { unsigned long buf[100]; }; (x) = (__force __typeof__(*(ptr)))__gue_val; \ } while (0) -#ifdef CONFIG_X86_WP_WORKS_OK - #define put_user_try uaccess_try #define put_user_catch(err) uaccess_catch(err) #define put_user_ex(x, ptr) \ __put_user_size_ex((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) -#else /* !CONFIG_X86_WP_WORKS_OK */ - -#define put_user_try do { \ - int __uaccess_err = 0; - -#define put_user_catch(err) \ - (err) |= __uaccess_err; \ -} while (0) - -#define put_user_ex(x, ptr) do { \ - __uaccess_err |= __put_user(x, ptr); \ -} while (0) - -#endif /* CONFIG_X86_WP_WORKS_OK */ - extern unsigned long copy_from_user_nmi(void *to, const void __user *from, unsigned long n); extern __must_check long diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 91ce48f05f9f..34e923a53762 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -9,7 +9,6 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) ifdef CONFIG_FUNCTION_TRACER # Do not profile debug and lowlevel utilities CFLAGS_REMOVE_tsc.o = -pg -CFLAGS_REMOVE_rtc.o = -pg CFLAGS_REMOVE_paravirt-spinlocks.o = -pg CFLAGS_REMOVE_pvclock.o = -pg CFLAGS_REMOVE_kvmclock.o = -pg @@ -62,6 +61,7 @@ obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o +obj-$(CONFIG_X86_TSC) += trace_clock.o obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index e651f7a589ac..e48cafcf92ae 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -574,6 +574,12 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) return irq; } +EXPORT_SYMBOL_GPL(acpi_register_gsi); + +void acpi_unregister_gsi(u32 gsi) +{ +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); void __init acpi_set_irq_model_pic(void) { diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 11676cf65aee..d5e0d717005a 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -101,6 +101,8 @@ static int __init acpi_sleep_setup(char *str) #endif if (strncmp(str, "nonvs", 5) == 0) acpi_nvs_nosave(); + if (strncmp(str, "nonvs_s3", 8) == 0) + acpi_nvs_nosave_s3(); if (strncmp(str, "old_ordering", 12) == 0) acpi_old_suspend_ordering(); str = strchr(str, ','); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index b17416e72fbd..b994cc84aa7e 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -90,21 +90,6 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); */ DEFINE_EARLY_PER_CPU_READ_MOSTLY(int, x86_cpu_to_logical_apicid, BAD_APICID); -/* - * Knob to control our willingness to enable the local APIC. - * - * +1=force-enable - */ -static int force_enable_local_apic __initdata; -/* - * APIC command line parameters - */ -static int __init parse_lapic(char *arg) -{ - force_enable_local_apic = 1; - return 0; -} -early_param("lapic", parse_lapic); /* Local APIC was disabled by the BIOS and enabled by the kernel */ static int enabled_via_apicbase; @@ -133,6 +118,25 @@ static inline void imcr_apic_to_pic(void) } #endif +/* + * Knob to control our willingness to enable the local APIC. + * + * +1=force-enable + */ +static int force_enable_local_apic __initdata; +/* + * APIC command line parameters + */ +static int __init parse_lapic(char *arg) +{ + if (config_enabled(CONFIG_X86_32) && !arg) + force_enable_local_apic = 1; + else if (!strncmp(arg, "notscdeadline", 13)) + setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER); + return 0; +} +early_param("lapic", parse_lapic); + #ifdef CONFIG_X86_64 static int apic_calibrate_pmtmr __initdata; static __init int setup_apicpmtimer(char *s) @@ -315,6 +319,7 @@ int lapic_get_maxlvt(void) /* Clock divisor */ #define APIC_DIVISOR 16 +#define TSC_DIVISOR 32 /* * This function sets up the local APIC timer, with a timeout of @@ -333,6 +338,9 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) lvtt_value = LOCAL_TIMER_VECTOR; if (!oneshot) lvtt_value |= APIC_LVT_TIMER_PERIODIC; + else if (boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER)) + lvtt_value |= APIC_LVT_TIMER_TSCDEADLINE; + if (!lapic_is_integrated()) lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); @@ -341,6 +349,11 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) apic_write(APIC_LVTT, lvtt_value); + if (lvtt_value & APIC_LVT_TIMER_TSCDEADLINE) { + printk_once(KERN_DEBUG "TSC deadline timer enabled\n"); + return; + } + /* * Divide PICLK by 16 */ @@ -453,6 +466,16 @@ static int lapic_next_event(unsigned long delta, return 0; } +static int lapic_next_deadline(unsigned long delta, + struct clock_event_device *evt) +{ + u64 tsc; + + rdtscll(tsc); + wrmsrl(MSR_IA32_TSC_DEADLINE, tsc + (((u64) delta) * TSC_DIVISOR)); + return 0; +} + /* * Setup the lapic timer in periodic or oneshot mode */ @@ -533,7 +556,15 @@ static void __cpuinit setup_APIC_timer(void) memcpy(levt, &lapic_clockevent, sizeof(*levt)); levt->cpumask = cpumask_of(smp_processor_id()); - clockevents_register_device(levt); + if (this_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER)) { + levt->features &= ~(CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DUMMY); + levt->set_next_event = lapic_next_deadline; + clockevents_config_and_register(levt, + (tsc_khz / TSC_DIVISOR) * 1000, + 0xF, ~0UL); + } else + clockevents_register_device(levt); } /* @@ -661,7 +692,9 @@ static int __init calibrate_APIC_clock(void) * in the clockevent structure and return. */ - if (lapic_timer_frequency) { + if (boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER)) { + return 0; + } else if (lapic_timer_frequency) { apic_printk(APIC_VERBOSE, "lapic timer already calibrated %d\n", lapic_timer_frequency); lapic_clockevent.mult = div_sc(lapic_timer_frequency/APIC_DIVISOR, @@ -674,6 +707,9 @@ static int __init calibrate_APIC_clock(void) return 0; } + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + local_irq_disable(); /* Replace the global interrupt handler */ @@ -811,9 +847,6 @@ void __init setup_boot_APIC_clock(void) return; } - apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" - "calibrating APIC timer ...\n"); - if (calibrate_APIC_clock()) { /* No broadcast on UP ! */ if (num_possible_cpus() > 1) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 1817fa911024..b739d398bb29 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -234,11 +234,11 @@ int __init arch_early_irq_init(void) zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_KERNEL, node); /* * For legacy IRQ's, start with assigning irq0 to irq15 to - * IRQ0_VECTOR to IRQ15_VECTOR on cpu 0. + * IRQ0_VECTOR to IRQ15_VECTOR for all cpu's. */ if (i < legacy_pic->nr_legacy_irqs) { cfg[i].vector = IRQ0_VECTOR + i; - cpumask_set_cpu(0, cfg[i].domain); + cpumask_setall(cfg[i].domain); } } @@ -1141,7 +1141,8 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask) * allocation for the members that are not used anymore. */ cpumask_andnot(cfg->old_domain, cfg->domain, tmp_mask); - cfg->move_in_progress = 1; + cfg->move_in_progress = + cpumask_intersects(cfg->old_domain, cpu_online_mask); cpumask_and(cfg->domain, cfg->domain, tmp_mask); break; } @@ -1172,8 +1173,9 @@ next: current_vector = vector; current_offset = offset; if (cfg->vector) { - cfg->move_in_progress = 1; cpumask_copy(cfg->old_domain, cfg->domain); + cfg->move_in_progress = + cpumask_intersects(cfg->old_domain, cpu_online_mask); } for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask) per_cpu(vector_irq, new_cpu)[vector] = irq; @@ -1241,12 +1243,6 @@ void __setup_vector_irq(int cpu) cfg = irq_get_chip_data(irq); if (!cfg) continue; - /* - * If it is a legacy IRQ handled by the legacy PIC, this cpu - * will be part of the irq_cfg's domain. - */ - if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq)) - cpumask_set_cpu(cpu, cfg->domain); if (!cpumask_test_cpu(cpu, cfg->domain)) continue; @@ -1356,16 +1352,6 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, if (!IO_APIC_IRQ(irq)) return; - /* - * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC - * can handle this irq and the apic driver is finialized at this point, - * update the cfg->domain. - */ - if (irq < legacy_pic->nr_legacy_irqs && - cpumask_equal(cfg->domain, cpumask_of(0))) - apic->vector_allocation_domain(0, cfg->domain, - apic->target_cpus()); - if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; @@ -2199,9 +2185,11 @@ static int ioapic_retrigger_irq(struct irq_data *data) { struct irq_cfg *cfg = data->chip_data; unsigned long flags; + int cpu; raw_spin_lock_irqsave(&vector_lock, flags); - apic->send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector); + cpu = cpumask_first_and(cfg->domain, cpu_online_mask); + apic->send_IPI_mask(cpumask_of(cpu), cfg->vector); raw_spin_unlock_irqrestore(&vector_lock, flags); return 1; @@ -3317,8 +3305,9 @@ int arch_setup_hpet_msi(unsigned int irq, unsigned int id) int ret; if (irq_remapping_enabled) { - if (!setup_hpet_msi_remapped(irq, id)) - return -1; + ret = setup_hpet_msi_remapped(irq, id); + if (ret) + return ret; } ret = msi_compose_msg(NULL, irq, &msg, id); diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 1b7d1656a042..15239fffd6fe 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -304,7 +304,7 @@ static void __cpuinit amd_get_topology(struct cpuinfo_x86 *c) int cpu = smp_processor_id(); /* get information required for multi-node processors */ - if (cpu_has(c, X86_FEATURE_TOPOEXT)) { + if (cpu_has_topoext) { u32 eax, ebx, ecx, edx; cpuid(0x8000001e, &eax, &ebx, &ecx, &edx); @@ -657,12 +657,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) detect_ht(c); #endif - if (c->extended_cpuid_level >= 0x80000006) { - if (cpuid_edx(0x80000006) & 0xf000) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - } + init_amd_cacheinfo(c); if (c->x86 >= 0xf) set_cpu_cap(c, X86_FEATURE_K8); @@ -753,9 +748,6 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, static void __cpuinit cpu_set_tlb_flushall_shift(struct cpuinfo_x86 *c) { - if (!cpu_has_invlpg) - return; - tlb_flushall_shift = 5; if (c->x86 <= 0x11) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index d0e910da16c5..92dfec986a48 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -107,53 +107,17 @@ static void __init check_hlt(void) } /* - * Most 386 processors have a bug where a POPAD can lock the - * machine even from user space. - */ - -static void __init check_popad(void) -{ -#ifndef CONFIG_X86_POPAD_OK - int res, inp = (int) &res; - - pr_info("Checking for popad bug... "); - __asm__ __volatile__( - "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " - : "=&a" (res) - : "d" (inp) - : "ecx", "edi"); - /* - * If this fails, it means that any user program may lock the - * CPU hard. Too bad. - */ - if (res != 12345678) - pr_cont("Buggy\n"); - else - pr_cont("OK\n"); -#endif -} - -/* * Check whether we are able to run this kernel safely on SMP. * - * - In order to run on a i386, we need to be compiled for i386 - * (for due to lack of "invlpg" and working WP on a i386) + * - i386 is no longer supported. * - In order to run on anything without a TSC, we need to be * compiled for a i486. */ static void __init check_config(void) { -/* - * We'd better not be a i386 if we're configured to use some - * i486+ only features! (WP works in supervisor mode and the - * new "invlpg" and "bswap" instructions) - */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \ - defined(CONFIG_X86_BSWAP) - if (boot_cpu_data.x86 == 3) + if (boot_cpu_data.x86 < 4) panic("Kernel requires i486+ for 'invlpg' and other features"); -#endif } @@ -166,7 +130,6 @@ void __init check_bugs(void) #endif check_config(); check_hlt(); - check_popad(); init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); alternative_instructions(); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 6a6432cf89de..9c3ab43a6954 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1228,7 +1228,7 @@ void __cpuinit cpu_init(void) oist = &per_cpu(orig_ist, cpu); #ifdef CONFIG_NUMA - if (cpu != 0 && this_cpu_read(numa_node) == 0 && + if (this_cpu_read(numa_node) == 0 && early_cpu_to_node(cpu) != NUMA_NO_NODE) set_numa_node(early_cpu_to_node(cpu)); #endif @@ -1260,8 +1260,7 @@ void __cpuinit cpu_init(void) barrier(); x86_configure_nx(); - if (cpu != 0) - enable_x2apic(); + enable_x2apic(); /* * set up and load the per-CPU TSS diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 198e019a531a..fcaabd0432c5 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -612,10 +612,6 @@ static void __cpuinit intel_tlb_lookup(const unsigned char desc) static void __cpuinit intel_tlb_flushall_shift_set(struct cpuinfo_x86 *c) { - if (!cpu_has_invlpg) { - tlb_flushall_shift = -1; - return; - } switch ((c->x86 << 8) + c->x86_model) { case 0x60f: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */ case 0x616: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */ diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 93c5451bdd52..fe9edec6698a 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -538,7 +538,11 @@ __cpuinit cpuid4_cache_lookup_regs(int index, unsigned edx; if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { - amd_cpuid4(index, &eax, &ebx, &ecx); + if (cpu_has_topoext) + cpuid_count(0x8000001d, index, &eax.full, + &ebx.full, &ecx.full, &edx); + else + amd_cpuid4(index, &eax, &ebx, &ecx); amd_init_l3_cache(this_leaf, index); } else { cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); @@ -557,21 +561,39 @@ __cpuinit cpuid4_cache_lookup_regs(int index, return 0; } -static int __cpuinit find_num_cache_leaves(void) +static int __cpuinit find_num_cache_leaves(struct cpuinfo_x86 *c) { - unsigned int eax, ebx, ecx, edx; + unsigned int eax, ebx, ecx, edx, op; union _cpuid4_leaf_eax cache_eax; int i = -1; + if (c->x86_vendor == X86_VENDOR_AMD) + op = 0x8000001d; + else + op = 4; + do { ++i; - /* Do cpuid(4) loop to find out num_cache_leaves */ - cpuid_count(4, i, &eax, &ebx, &ecx, &edx); + /* Do cpuid(op) loop to find out num_cache_leaves */ + cpuid_count(op, i, &eax, &ebx, &ecx, &edx); cache_eax.full = eax; } while (cache_eax.split.type != CACHE_TYPE_NULL); return i; } +void __cpuinit init_amd_cacheinfo(struct cpuinfo_x86 *c) +{ + + if (cpu_has_topoext) { + num_cache_leaves = find_num_cache_leaves(c); + } else if (c->extended_cpuid_level >= 0x80000006) { + if (cpuid_edx(0x80000006) & 0xf000) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + } +} + unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) { /* Cache sizes */ @@ -588,7 +610,7 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) if (is_initialized == 0) { /* Init num_cache_leaves from boot CPU */ - num_cache_leaves = find_num_cache_leaves(); + num_cache_leaves = find_num_cache_leaves(c); is_initialized++; } @@ -728,37 +750,50 @@ static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info); static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index) { struct _cpuid4_info *this_leaf; - int ret, i, sibling; - struct cpuinfo_x86 *c = &cpu_data(cpu); + int i, sibling; - ret = 0; - if (index == 3) { - ret = 1; - for_each_cpu(i, cpu_llc_shared_mask(cpu)) { + if (cpu_has_topoext) { + unsigned int apicid, nshared, first, last; + + if (!per_cpu(ici_cpuid4_info, cpu)) + return 0; + + this_leaf = CPUID4_INFO_IDX(cpu, index); + nshared = this_leaf->base.eax.split.num_threads_sharing + 1; + apicid = cpu_data(cpu).apicid; + first = apicid - (apicid % nshared); + last = first + nshared - 1; + + for_each_online_cpu(i) { + apicid = cpu_data(i).apicid; + if ((apicid < first) || (apicid > last)) + continue; if (!per_cpu(ici_cpuid4_info, i)) continue; this_leaf = CPUID4_INFO_IDX(i, index); - for_each_cpu(sibling, cpu_llc_shared_mask(cpu)) { - if (!cpu_online(sibling)) + + for_each_online_cpu(sibling) { + apicid = cpu_data(sibling).apicid; + if ((apicid < first) || (apicid > last)) continue; set_bit(sibling, this_leaf->shared_cpu_map); } } - } else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) { - ret = 1; - for_each_cpu(i, cpu_sibling_mask(cpu)) { + } else if (index == 3) { + for_each_cpu(i, cpu_llc_shared_mask(cpu)) { if (!per_cpu(ici_cpuid4_info, i)) continue; this_leaf = CPUID4_INFO_IDX(i, index); - for_each_cpu(sibling, cpu_sibling_mask(cpu)) { + for_each_cpu(sibling, cpu_llc_shared_mask(cpu)) { if (!cpu_online(sibling)) continue; set_bit(sibling, this_leaf->shared_cpu_map); } } - } + } else + return 0; - return ret; + return 1; } static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 6b96110bb0c3..e4c1a4184531 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -695,11 +695,16 @@ void mtrr_ap_init(void) } /** - * Save current fixed-range MTRR state of the BSP + * Save current fixed-range MTRR state of the first cpu in cpu_online_mask. */ void mtrr_save_state(void) { - smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1); + int first_cpu; + + get_online_cpus(); + first_cpu = cpumask_first(cpu_online_mask); + smp_call_function_single(first_cpu, mtrr_save_fixed_ranges, NULL, 1); + put_online_cpus(); } void set_mtrr_aps_delayed_init(void) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 4a3374e61a93..4428fd178bce 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1316,6 +1316,121 @@ static struct attribute_group x86_pmu_format_group = { .attrs = NULL, }; +struct perf_pmu_events_attr { + struct device_attribute attr; + u64 id; +}; + +/* + * Remove all undefined events (x86_pmu.event_map(id) == 0) + * out of events_attr attributes. + */ +static void __init filter_events(struct attribute **attrs) +{ + int i, j; + + for (i = 0; attrs[i]; i++) { + if (x86_pmu.event_map(i)) + continue; + + for (j = i; attrs[j]; j++) + attrs[j] = attrs[j + 1]; + + /* Check the shifted attr. */ + i--; + } +} + +static ssize_t events_sysfs_show(struct device *dev, struct device_attribute *attr, + char *page) +{ + struct perf_pmu_events_attr *pmu_attr = \ + container_of(attr, struct perf_pmu_events_attr, attr); + + u64 config = x86_pmu.event_map(pmu_attr->id); + return x86_pmu.events_sysfs_show(page, config); +} + +#define EVENT_VAR(_id) event_attr_##_id +#define EVENT_PTR(_id) &event_attr_##_id.attr.attr + +#define EVENT_ATTR(_name, _id) \ +static struct perf_pmu_events_attr EVENT_VAR(_id) = { \ + .attr = __ATTR(_name, 0444, events_sysfs_show, NULL), \ + .id = PERF_COUNT_HW_##_id, \ +}; + +EVENT_ATTR(cpu-cycles, CPU_CYCLES ); +EVENT_ATTR(instructions, INSTRUCTIONS ); +EVENT_ATTR(cache-references, CACHE_REFERENCES ); +EVENT_ATTR(cache-misses, CACHE_MISSES ); +EVENT_ATTR(branch-instructions, BRANCH_INSTRUCTIONS ); +EVENT_ATTR(branch-misses, BRANCH_MISSES ); +EVENT_ATTR(bus-cycles, BUS_CYCLES ); +EVENT_ATTR(stalled-cycles-frontend, STALLED_CYCLES_FRONTEND ); +EVENT_ATTR(stalled-cycles-backend, STALLED_CYCLES_BACKEND ); +EVENT_ATTR(ref-cycles, REF_CPU_CYCLES ); + +static struct attribute *empty_attrs; + +static struct attribute *events_attr[] = { + EVENT_PTR(CPU_CYCLES), + EVENT_PTR(INSTRUCTIONS), + EVENT_PTR(CACHE_REFERENCES), + EVENT_PTR(CACHE_MISSES), + EVENT_PTR(BRANCH_INSTRUCTIONS), + EVENT_PTR(BRANCH_MISSES), + EVENT_PTR(BUS_CYCLES), + EVENT_PTR(STALLED_CYCLES_FRONTEND), + EVENT_PTR(STALLED_CYCLES_BACKEND), + EVENT_PTR(REF_CPU_CYCLES), + NULL, +}; + +static struct attribute_group x86_pmu_events_group = { + .name = "events", + .attrs = events_attr, +}; + +ssize_t x86_event_sysfs_show(char *page, u64 config, u64 event) +{ + u64 umask = (config & ARCH_PERFMON_EVENTSEL_UMASK) >> 8; + u64 cmask = (config & ARCH_PERFMON_EVENTSEL_CMASK) >> 24; + bool edge = (config & ARCH_PERFMON_EVENTSEL_EDGE); + bool pc = (config & ARCH_PERFMON_EVENTSEL_PIN_CONTROL); + bool any = (config & ARCH_PERFMON_EVENTSEL_ANY); + bool inv = (config & ARCH_PERFMON_EVENTSEL_INV); + ssize_t ret; + + /* + * We have whole page size to spend and just little data + * to write, so we can safely use sprintf. + */ + ret = sprintf(page, "event=0x%02llx", event); + + if (umask) + ret += sprintf(page + ret, ",umask=0x%02llx", umask); + + if (edge) + ret += sprintf(page + ret, ",edge"); + + if (pc) + ret += sprintf(page + ret, ",pc"); + + if (any) + ret += sprintf(page + ret, ",any"); + + if (inv) + ret += sprintf(page + ret, ",inv"); + + if (cmask) + ret += sprintf(page + ret, ",cmask=0x%02llx", cmask); + + ret += sprintf(page + ret, "\n"); + + return ret; +} + static int __init init_hw_perf_events(void) { struct x86_pmu_quirk *quirk; @@ -1362,6 +1477,11 @@ static int __init init_hw_perf_events(void) x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */ x86_pmu_format_group.attrs = x86_pmu.format_attrs; + if (!x86_pmu.events_sysfs_show) + x86_pmu_events_group.attrs = &empty_attrs; + else + filter_events(x86_pmu_events_group.attrs); + pr_info("... version: %d\n", x86_pmu.version); pr_info("... bit width: %d\n", x86_pmu.cntval_bits); pr_info("... generic registers: %d\n", x86_pmu.num_counters); @@ -1651,6 +1771,7 @@ static struct attribute_group x86_pmu_attr_group = { static const struct attribute_group *x86_pmu_attr_groups[] = { &x86_pmu_attr_group, &x86_pmu_format_group, + &x86_pmu_events_group, NULL, }; diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 271d25700297..115c1ea97746 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -354,6 +354,8 @@ struct x86_pmu { int attr_rdpmc; struct attribute **format_attrs; + ssize_t (*events_sysfs_show)(char *page, u64 config); + /* * CPU Hotplug hooks */ @@ -536,6 +538,9 @@ static inline void set_linear_ip(struct pt_regs *regs, unsigned long ip) regs->ip = ip; } +ssize_t x86_event_sysfs_show(char *page, u64 config, u64 event); +ssize_t intel_event_sysfs_show(char *page, u64 config); + #ifdef CONFIG_CPU_SUP_AMD int amd_pmu_init(void); diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 4528ae7b6ec4..c93bc4e813a0 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -568,6 +568,14 @@ amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, struct perf_event *ev } } +static ssize_t amd_event_sysfs_show(char *page, u64 config) +{ + u64 event = (config & ARCH_PERFMON_EVENTSEL_EVENT) | + (config & AMD64_EVENTSEL_EVENT) >> 24; + + return x86_event_sysfs_show(page, config, event); +} + static __initconst const struct x86_pmu amd_pmu = { .name = "AMD", .handle_irq = x86_pmu_handle_irq, @@ -591,6 +599,7 @@ static __initconst const struct x86_pmu amd_pmu = { .put_event_constraints = amd_put_event_constraints, .format_attrs = amd_format_attr, + .events_sysfs_show = amd_event_sysfs_show, .cpu_prepare = amd_pmu_cpu_prepare, .cpu_starting = amd_pmu_cpu_starting, diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 324bb523d9d9..93b9e1181f83 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1603,6 +1603,13 @@ static struct attribute *intel_arch_formats_attr[] = { NULL, }; +ssize_t intel_event_sysfs_show(char *page, u64 config) +{ + u64 event = (config & ARCH_PERFMON_EVENTSEL_EVENT); + + return x86_event_sysfs_show(page, config, event); +} + static __initconst const struct x86_pmu core_pmu = { .name = "core", .handle_irq = x86_pmu_handle_irq, @@ -1628,6 +1635,7 @@ static __initconst const struct x86_pmu core_pmu = { .event_constraints = intel_core_event_constraints, .guest_get_msrs = core_guest_get_msrs, .format_attrs = intel_arch_formats_attr, + .events_sysfs_show = intel_event_sysfs_show, }; struct intel_shared_regs *allocate_shared_regs(int cpu) @@ -1766,6 +1774,7 @@ static __initconst const struct x86_pmu intel_pmu = { .pebs_aliases = intel_pebs_aliases_core2, .format_attrs = intel_arch3_formats_attr, + .events_sysfs_show = intel_event_sysfs_show, .cpu_prepare = intel_pmu_cpu_prepare, .cpu_starting = intel_pmu_cpu_starting, diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c index 7d0270bd793e..f2af39f5dc3d 100644 --- a/arch/x86/kernel/cpu/perf_event_p6.c +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -227,6 +227,8 @@ static __initconst const struct x86_pmu p6_pmu = { .event_constraints = p6_event_constraints, .format_attrs = intel_p6_formats_attr, + .events_sysfs_show = intel_event_sysfs_show, + }; __init int p6_pmu_init(void) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 2363e820ed68..70641aff0c25 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -56,7 +56,7 @@ #include <asm/ftrace.h> #include <asm/percpu.h> #include <asm/asm.h> -#include <asm/rcu.h> +#include <asm/context_tracking.h> #include <asm/smap.h> #include <linux/err.h> @@ -1715,9 +1715,10 @@ nested_nmi: 1: /* Set up the interrupted NMIs stack to jump to repeat_nmi */ - leaq -6*8(%rsp), %rdx + leaq -1*8(%rsp), %rdx movq %rdx, %rsp - CFI_ADJUST_CFA_OFFSET 6*8 + CFI_ADJUST_CFA_OFFSET 1*8 + leaq -10*8(%rsp), %rdx pushq_cfi $__KERNEL_DS pushq_cfi %rdx pushfq_cfi @@ -1725,8 +1726,8 @@ nested_nmi: pushq_cfi $repeat_nmi /* Put stack back */ - addq $(11*8), %rsp - CFI_ADJUST_CFA_OFFSET -11*8 + addq $(6*8), %rsp + CFI_ADJUST_CFA_OFFSET -6*8 nested_nmi_out: popq_cfi %rdx @@ -1752,18 +1753,18 @@ first_nmi: * +-------------------------+ * | NMI executing variable | * +-------------------------+ - * | Saved SS | - * | Saved Return RSP | - * | Saved RFLAGS | - * | Saved CS | - * | Saved RIP | - * +-------------------------+ * | copied SS | * | copied Return RSP | * | copied RFLAGS | * | copied CS | * | copied RIP | * +-------------------------+ + * | Saved SS | + * | Saved Return RSP | + * | Saved RFLAGS | + * | Saved CS | + * | Saved RIP | + * +-------------------------+ * | pt_regs | * +-------------------------+ * @@ -1779,9 +1780,14 @@ first_nmi: /* Set the NMI executing variable on the stack. */ pushq_cfi $1 + /* + * Leave room for the "copied" frame + */ + subq $(5*8), %rsp + /* Copy the stack frame to the Saved frame */ .rept 5 - pushq_cfi 6*8(%rsp) + pushq_cfi 11*8(%rsp) .endr CFI_DEF_CFA_OFFSET SS+8-RIP @@ -1802,12 +1808,15 @@ repeat_nmi: * is benign for the non-repeat case, where 1 was pushed just above * to this very stack slot). */ - movq $1, 5*8(%rsp) + movq $1, 10*8(%rsp) /* Make another copy, this one may be modified by nested NMIs */ + addq $(10*8), %rsp + CFI_ADJUST_CFA_OFFSET -10*8 .rept 5 - pushq_cfi 4*8(%rsp) + pushq_cfi -6*8(%rsp) .endr + subq $(5*8), %rsp CFI_DEF_CFA_OFFSET SS+8-RIP end_repeat_nmi: @@ -1858,8 +1867,12 @@ nmi_swapgs: SWAPGS_UNSAFE_STACK nmi_restore: RESTORE_ALL 8 + + /* Pop the extra iret frame */ + addq $(5*8), %rsp + /* Clear the NMI executing stack variable */ - movq $0, 10*8(%rsp) + movq $0, 5*8(%rsp) jmp irq_return CFI_ENDPROC END(nmi) diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 957a47aec64e..8e7f6556028f 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -266,6 +266,19 @@ num_subarch_entries = (. - subarch_entries) / 4 jmp default_entry #endif /* CONFIG_PARAVIRT */ +#ifdef CONFIG_HOTPLUG_CPU +/* + * Boot CPU0 entry point. It's called from play_dead(). Everything has been set + * up already except stack. We just set up stack here. Then call + * start_secondary(). + */ +ENTRY(start_cpu0) + movl stack_start, %ecx + movl %ecx, %esp + jmp *(initial_code) +ENDPROC(start_cpu0) +#endif + /* * Non-boot CPU entry point; entered from trampoline.S * We can't lgdt here, because lgdt itself uses a data segment, but @@ -292,8 +305,8 @@ default_entry: * be using the global pages. * * NOTE! If we are on a 486 we may have no cr4 at all! - * Specifically, cr4 exists if and only if CPUID exists, - * which in turn exists if and only if EFLAGS.ID exists. + * Specifically, cr4 exists if and only if CPUID exists + * and has flags other than the FPU flag set. */ movl $X86_EFLAGS_ID,%ecx pushl %ecx @@ -308,6 +321,11 @@ default_entry: testl %ecx,%eax jz 6f # No ID flag = no CPUID = no CR4 + movl $1,%eax + cpuid + andl $~1,%edx # Ignore CPUID.FPU + jz 6f # No flags or only CPUID.FPU = no CR4 + movl pa(mmu_cr4_features),%eax movl %eax,%cr4 diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 94bf9cc2c7ee..980053c4b9cc 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -252,6 +252,22 @@ ENTRY(secondary_startup_64) pushq %rax # target address in negative space lretq +#ifdef CONFIG_HOTPLUG_CPU +/* + * Boot CPU0 entry point. It's called from play_dead(). Everything has been set + * up already except stack. We just set up stack here. Then call + * start_secondary(). + */ +ENTRY(start_cpu0) + movq stack_start(%rip),%rsp + movq initial_code(%rip),%rax + pushq $0 # fake return address to stop unwinder + pushq $__KERNEL_CS # set correct cs + pushq %rax # target address in negative space + lretq +ENDPROC(start_cpu0) +#endif + /* SMP bootup changes these two */ __REFDATA .align 8 diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 1460a5df92f7..e28670f9a589 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -434,7 +434,7 @@ void hpet_msi_unmask(struct irq_data *data) /* unmask it */ cfg = hpet_readl(HPET_Tn_CFG(hdev->num)); - cfg |= HPET_TN_FSB; + cfg |= HPET_TN_ENABLE | HPET_TN_FSB; hpet_writel(cfg, HPET_Tn_CFG(hdev->num)); } @@ -445,7 +445,7 @@ void hpet_msi_mask(struct irq_data *data) /* mask it */ cfg = hpet_readl(HPET_Tn_CFG(hdev->num)); - cfg &= ~HPET_TN_FSB; + cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB); hpet_writel(cfg, HPET_Tn_CFG(hdev->num)); } diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 675a05012449..245a71db401a 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -175,7 +175,11 @@ void __cpuinit fpu_init(void) cr0 |= X86_CR0_EM; write_cr0(cr0); - if (!smp_processor_id()) + /* + * init_thread_xstate is only called once to avoid overriding + * xstate_size during boot time or during CPU hotplug. + */ + if (xstate_size == 0) init_thread_xstate(); mxcsr_feature_mask_init(); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index fe9459593257..2ed787f15bf0 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -276,11 +276,6 @@ void (*pm_idle)(void); EXPORT_SYMBOL(pm_idle); #endif -static inline int hlt_use_halt(void) -{ - return 1; -} - #ifndef CONFIG_SMP static inline void play_dead(void) { @@ -380,28 +375,22 @@ void cpu_idle(void) */ void default_idle(void) { - if (hlt_use_halt()) { - trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id()); - trace_cpu_idle_rcuidle(1, smp_processor_id()); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); + trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id()); + trace_cpu_idle_rcuidle(1, smp_processor_id()); + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; - trace_power_end_rcuidle(smp_processor_id()); - trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); - } else { + if (!need_resched()) + safe_halt(); /* enables interrupts racelessly */ + else local_irq_enable(); - /* loop is done by the caller */ - cpu_relax(); - } + current_thread_info()->status |= TS_POLLING; + trace_power_end_rcuidle(smp_processor_id()); + trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); } #ifdef CONFIG_APM_MODULE EXPORT_SYMBOL(default_idle); diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 5e0596b0632e..b629bbe0d9bd 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/hw_breakpoint.h> #include <linux/rcupdate.h> #include <linux/module.h> +#include <linux/context_tracking.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -1491,7 +1492,7 @@ long syscall_trace_enter(struct pt_regs *regs) { long ret = 0; - rcu_user_exit(); + user_exit(); /* * If we stepped into a sysenter/syscall insn, it trapped in @@ -1541,6 +1542,13 @@ void syscall_trace_leave(struct pt_regs *regs) { bool step; + /* + * We may come here right after calling schedule_user() + * or do_notify_resume(), in which case we can be in RCU + * user mode. + */ + user_exit(); + audit_syscall_exit(regs); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) @@ -1557,5 +1565,5 @@ void syscall_trace_leave(struct pt_regs *regs) if (step || test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, step); - rcu_user_enter(); + user_enter(); } diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 4929c1be0ac0..801602b5d745 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -195,12 +195,6 @@ void read_persistent_clock(struct timespec *ts) ts->tv_nsec = 0; } -unsigned long long native_read_tsc(void) -{ - return __native_read_tsc(); -} -EXPORT_SYMBOL(native_read_tsc); - static struct resource rtc_resources[] = { [0] = { diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index 70b27ee6118e..fbbb604313a2 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -22,6 +22,7 @@ #include <linux/uaccess.h> #include <linux/user-return-notifier.h> #include <linux/uprobes.h> +#include <linux/context_tracking.h> #include <asm/processor.h> #include <asm/ucontext.h> @@ -816,7 +817,7 @@ static void do_signal(struct pt_regs *regs) void do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) { - rcu_user_exit(); + user_exit(); #ifdef CONFIG_X86_MCE /* notify userspace of pending MCEs */ @@ -838,7 +839,7 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) if (thread_info_flags & _TIF_USER_RETURN_NOTIFY) fire_user_return_notifiers(); - rcu_user_enter(); + user_enter(); } void signal_fault(struct pt_regs *regs, void __user *frame, char *where) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index c80a33bc528b..ed0fe385289d 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -68,6 +68,8 @@ #include <asm/mwait.h> #include <asm/apic.h> #include <asm/io_apic.h> +#include <asm/i387.h> +#include <asm/fpu-internal.h> #include <asm/setup.h> #include <asm/uv/uv.h> #include <linux/mc146818rtc.h> @@ -125,8 +127,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_info); atomic_t init_deasserted; /* - * Report back to the Boot Processor. - * Running on AP. + * Report back to the Boot Processor during boot time or to the caller processor + * during CPU online. */ static void __cpuinit smp_callin(void) { @@ -138,15 +140,17 @@ static void __cpuinit smp_callin(void) * we may get here before an INIT-deassert IPI reaches * our local APIC. We have to wait for the IPI or we'll * lock up on an APIC access. + * + * Since CPU0 is not wakened up by INIT, it doesn't wait for the IPI. */ - if (apic->wait_for_init_deassert) + cpuid = smp_processor_id(); + if (apic->wait_for_init_deassert && cpuid != 0) apic->wait_for_init_deassert(&init_deasserted); /* * (This works even if the APIC is not enabled.) */ phys_id = read_apic_id(); - cpuid = smp_processor_id(); if (cpumask_test_cpu(cpuid, cpu_callin_mask)) { panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__, phys_id, cpuid); @@ -228,6 +232,8 @@ static void __cpuinit smp_callin(void) cpumask_set_cpu(cpuid, cpu_callin_mask); } +static int cpu0_logical_apicid; +static int enable_start_cpu0; /* * Activate a secondary processor. */ @@ -243,6 +249,8 @@ notrace static void __cpuinit start_secondary(void *unused) preempt_disable(); smp_callin(); + enable_start_cpu0 = 0; + #ifdef CONFIG_X86_32 /* switch away from the initial page table */ load_cr3(swapper_pg_dir); @@ -279,19 +287,30 @@ notrace static void __cpuinit start_secondary(void *unused) cpu_idle(); } +void __init smp_store_boot_cpu_info(void) +{ + int id = 0; /* CPU 0 */ + struct cpuinfo_x86 *c = &cpu_data(id); + + *c = boot_cpu_data; + c->cpu_index = id; +} + /* * The bootstrap kernel entry code has set these up. Save them for * a given CPU */ - void __cpuinit smp_store_cpu_info(int id) { struct cpuinfo_x86 *c = &cpu_data(id); *c = boot_cpu_data; c->cpu_index = id; - if (id != 0) - identify_secondary_cpu(c); + /* + * During boot time, CPU0 has this setup already. Save the info when + * bringing up AP or offlined CPU0. + */ + identify_secondary_cpu(c); } static bool __cpuinit @@ -313,7 +332,7 @@ do { \ static bool __cpuinit match_smt(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) { - if (cpu_has(c, X86_FEATURE_TOPOEXT)) { + if (cpu_has_topoext) { int cpu1 = c->cpu_index, cpu2 = o->cpu_index; if (c->phys_proc_id == o->phys_proc_id && @@ -481,7 +500,7 @@ void __inquire_remote_apic(int apicid) * won't ... remember to clear down the APIC, etc later. */ int __cpuinit -wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip) +wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip) { unsigned long send_status, accept_status = 0; int maxlvt; @@ -489,7 +508,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip) /* Target chip */ /* Boot on the stack */ /* Kick the second */ - apic_icr_write(APIC_DM_NMI | apic->dest_logical, logical_apicid); + apic_icr_write(APIC_DM_NMI | apic->dest_logical, apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -649,6 +668,63 @@ static void __cpuinit announce_cpu(int cpu, int apicid) node, cpu, apicid); } +static int wakeup_cpu0_nmi(unsigned int cmd, struct pt_regs *regs) +{ + int cpu; + + cpu = smp_processor_id(); + if (cpu == 0 && !cpu_online(cpu) && enable_start_cpu0) + return NMI_HANDLED; + + return NMI_DONE; +} + +/* + * Wake up AP by INIT, INIT, STARTUP sequence. + * + * Instead of waiting for STARTUP after INITs, BSP will execute the BIOS + * boot-strap code which is not a desired behavior for waking up BSP. To + * void the boot-strap code, wake up CPU0 by NMI instead. + * + * This works to wake up soft offlined CPU0 only. If CPU0 is hard offlined + * (i.e. physically hot removed and then hot added), NMI won't wake it up. + * We'll change this code in the future to wake up hard offlined CPU0 if + * real platform and request are available. + */ +static int __cpuinit +wakeup_cpu_via_init_nmi(int cpu, unsigned long start_ip, int apicid, + int *cpu0_nmi_registered) +{ + int id; + int boot_error; + + /* + * Wake up AP by INIT, INIT, STARTUP sequence. + */ + if (cpu) + return wakeup_secondary_cpu_via_init(apicid, start_ip); + + /* + * Wake up BSP by nmi. + * + * Register a NMI handler to help wake up CPU0. + */ + boot_error = register_nmi_handler(NMI_LOCAL, + wakeup_cpu0_nmi, 0, "wake_cpu0"); + + if (!boot_error) { + enable_start_cpu0 = 1; + *cpu0_nmi_registered = 1; + if (apic->dest_logical == APIC_DEST_LOGICAL) + id = cpu0_logical_apicid; + else + id = apicid; + boot_error = wakeup_secondary_cpu_via_nmi(id, start_ip); + } + + return boot_error; +} + /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad * (ie clustered apic addressing mode), this is a LOGICAL apic ID. @@ -664,6 +740,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle) unsigned long boot_error = 0; int timeout; + int cpu0_nmi_registered = 0; /* Just in case we booted with a single CPU. */ alternatives_enable_smp(); @@ -711,13 +788,16 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle) } /* - * Kick the secondary CPU. Use the method in the APIC driver - * if it's defined - or use an INIT boot APIC message otherwise: + * Wake up a CPU in difference cases: + * - Use the method in the APIC driver if it's defined + * Otherwise, + * - Use an INIT boot APIC message for APs or NMI for BSP. */ if (apic->wakeup_secondary_cpu) boot_error = apic->wakeup_secondary_cpu(apicid, start_ip); else - boot_error = wakeup_secondary_cpu_via_init(apicid, start_ip); + boot_error = wakeup_cpu_via_init_nmi(cpu, start_ip, apicid, + &cpu0_nmi_registered); if (!boot_error) { /* @@ -782,6 +862,13 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle) */ smpboot_restore_warm_reset_vector(); } + /* + * Clean up the nmi handler. Do this after the callin and callout sync + * to avoid impact of possible long unregister time. + */ + if (cpu0_nmi_registered) + unregister_nmi_handler(NMI_LOCAL, "wake_cpu0"); + return boot_error; } @@ -795,7 +882,7 @@ int __cpuinit native_cpu_up(unsigned int cpu, struct task_struct *tidle) pr_debug("++++++++++++++++++++=_---CPU UP %u\n", cpu); - if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid || + if (apicid == BAD_APICID || !physid_isset(apicid, phys_cpu_present_map) || !apic->apic_id_valid(apicid)) { pr_err("%s: bad cpu %d\n", __func__, cpu); @@ -818,6 +905,9 @@ int __cpuinit native_cpu_up(unsigned int cpu, struct task_struct *tidle) per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; + /* the FPU context is blank, nobody can own it */ + __cpu_disable_lazy_restore(cpu); + err = do_boot_cpu(apicid, cpu, tidle); if (err) { pr_debug("do_boot_cpu failed %d\n", err); @@ -990,7 +1080,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) /* * Setup boot CPU information */ - smp_store_cpu_info(0); /* Final full version of the data */ + smp_store_boot_cpu_info(); /* Final full version of the data */ cpumask_copy(cpu_callin_mask, cpumask_of(0)); mb(); @@ -1026,6 +1116,11 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) */ setup_local_APIC(); + if (x2apic_mode) + cpu0_logical_apicid = apic_read(APIC_LDR); + else + cpu0_logical_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR)); + /* * Enable IO APIC before setting up error vector */ @@ -1214,19 +1309,6 @@ void cpu_disable_common(void) int native_cpu_disable(void) { - int cpu = smp_processor_id(); - - /* - * Perhaps use cpufreq to drop frequency, but that could go - * into generic code. - * - * We won't take down the boot processor on i386 due to some - * interrupts only being able to be serviced by the BSP. - * Especially so if we're not using an IOAPIC -zwane - */ - if (cpu == 0) - return -EBUSY; - clear_local_APIC(); cpu_disable_common(); @@ -1266,6 +1348,14 @@ void play_dead_common(void) local_irq_disable(); } +static bool wakeup_cpu0(void) +{ + if (smp_processor_id() == 0 && enable_start_cpu0) + return true; + + return false; +} + /* * We need to flush the caches before going to sleep, lest we have * dirty data in our caches when we come back up. @@ -1329,6 +1419,11 @@ static inline void mwait_play_dead(void) __monitor(mwait_ptr, 0, 0); mb(); __mwait(eax, 0); + /* + * If NMI wants to wake up CPU0, start CPU0. + */ + if (wakeup_cpu0()) + start_cpu0(); } } @@ -1339,6 +1434,11 @@ static inline void hlt_play_dead(void) while (1) { native_halt(); + /* + * If NMI wants to wake up CPU0, start CPU0. + */ + if (wakeup_cpu0()) + start_cpu0(); } } diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index b4d3c3927dd8..97ef74b88e0f 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -21,37 +21,23 @@ /* * Align a virtual address to avoid aliasing in the I$ on AMD F15h. - * - * @flags denotes the allocation direction - bottomup or topdown - - * or vDSO; see call sites below. */ -unsigned long align_addr(unsigned long addr, struct file *filp, - enum align_flags flags) +static unsigned long get_align_mask(void) { - unsigned long tmp_addr; - /* handle 32- and 64-bit case with a single conditional */ if (va_align.flags < 0 || !(va_align.flags & (2 - mmap_is_ia32()))) - return addr; + return 0; if (!(current->flags & PF_RANDOMIZE)) - return addr; - - if (!((flags & ALIGN_VDSO) || filp)) - return addr; - - tmp_addr = addr; - - /* - * We need an address which is <= than the original - * one only when in topdown direction. - */ - if (!(flags & ALIGN_TOPDOWN)) - tmp_addr += va_align.mask; + return 0; - tmp_addr &= ~va_align.mask; + return va_align.mask; +} - return tmp_addr; +unsigned long align_vdso_addr(unsigned long addr) +{ + unsigned long align_mask = get_align_mask(); + return (addr + align_mask) & ~align_mask; } static int __init control_va_addr_alignment(char *str) @@ -126,7 +112,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; - unsigned long start_addr; + struct vm_unmapped_area_info info; unsigned long begin, end; if (flags & MAP_FIXED) @@ -144,50 +130,16 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } - if (((flags & MAP_32BIT) || test_thread_flag(TIF_ADDR32)) - && len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = begin; - } - addr = mm->free_area_cache; - if (addr < begin) - addr = begin; - start_addr = addr; - -full_search: - - addr = align_addr(addr, filp, 0); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (end - len < addr) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != begin) { - start_addr = addr = begin; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (!vma || addr + len <= vma->vm_start) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - addr = vma->vm_end; - addr = align_addr(addr, filp, 0); - } + info.flags = 0; + info.length = len; + info.low_limit = begin; + info.high_limit = end; + info.align_mask = filp ? get_align_mask() : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); } - unsigned long arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, const unsigned long len, const unsigned long pgoff, @@ -195,7 +147,8 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, { struct vm_area_struct *vma; struct mm_struct *mm = current->mm; - unsigned long addr = addr0, start_addr; + unsigned long addr = addr0; + struct vm_unmapped_area_info info; /* requested length too big for entire address space */ if (len > TASK_SIZE) @@ -217,51 +170,16 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } - -try_again: - /* either no address requested or can't fit in requested address hole */ - start_addr = addr = mm->free_area_cache; - - if (addr < len) - goto fail; - - addr -= len; - do { - addr = align_addr(addr, filp, ALIGN_TOPDOWN); - - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (!vma || addr+len <= vma->vm_start) - /* remember the address as a hint for next time */ - return mm->free_area_cache = addr; - - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = vma->vm_start-len; - } while (len < vma->vm_start); - -fail: - /* - * if hint left us with no space for the requested - * mapping then try again: - */ - if (start_addr != mm->mmap_base) { - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = 0; - goto try_again; - } + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + info.align_mask = filp ? get_align_mask() : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); + if (!(addr & ~PAGE_MASK)) + return addr; + VM_BUG_ON(addr != -ENOMEM); bottomup: /* @@ -270,14 +188,5 @@ bottomup: * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; - - return addr; + return arch_get_unmapped_area(filp, addr0, len, pgoff, flags); } diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c index 76ee97709a00..6e60b5fe2244 100644 --- a/arch/x86/kernel/topology.c +++ b/arch/x86/kernel/topology.c @@ -30,23 +30,110 @@ #include <linux/mmzone.h> #include <linux/init.h> #include <linux/smp.h> +#include <linux/irq.h> #include <asm/cpu.h> static DEFINE_PER_CPU(struct x86_cpu, cpu_devices); #ifdef CONFIG_HOTPLUG_CPU + +#ifdef CONFIG_BOOTPARAM_HOTPLUG_CPU0 +static int cpu0_hotpluggable = 1; +#else +static int cpu0_hotpluggable; +static int __init enable_cpu0_hotplug(char *str) +{ + cpu0_hotpluggable = 1; + return 1; +} + +__setup("cpu0_hotplug", enable_cpu0_hotplug); +#endif + +#ifdef CONFIG_DEBUG_HOTPLUG_CPU0 +/* + * This function offlines a CPU as early as possible and allows userspace to + * boot up without the CPU. The CPU can be onlined back by user after boot. + * + * This is only called for debugging CPU offline/online feature. + */ +int __ref _debug_hotplug_cpu(int cpu, int action) +{ + struct device *dev = get_cpu_device(cpu); + int ret; + + if (!cpu_is_hotpluggable(cpu)) + return -EINVAL; + + cpu_hotplug_driver_lock(); + + switch (action) { + case 0: + ret = cpu_down(cpu); + if (!ret) { + pr_info("CPU %u is now offline\n", cpu); + kobject_uevent(&dev->kobj, KOBJ_OFFLINE); + } else + pr_debug("Can't offline CPU%d.\n", cpu); + break; + case 1: + ret = cpu_up(cpu); + if (!ret) + kobject_uevent(&dev->kobj, KOBJ_ONLINE); + else + pr_debug("Can't online CPU%d.\n", cpu); + break; + default: + ret = -EINVAL; + } + + cpu_hotplug_driver_unlock(); + + return ret; +} + +static int __init debug_hotplug_cpu(void) +{ + _debug_hotplug_cpu(0, 0); + return 0; +} + +late_initcall_sync(debug_hotplug_cpu); +#endif /* CONFIG_DEBUG_HOTPLUG_CPU0 */ + int __ref arch_register_cpu(int num) { + struct cpuinfo_x86 *c = &cpu_data(num); + + /* + * Currently CPU0 is only hotpluggable on Intel platforms. Other + * vendors can add hotplug support later. + */ + if (c->x86_vendor != X86_VENDOR_INTEL) + cpu0_hotpluggable = 0; + /* - * CPU0 cannot be offlined due to several - * restrictions and assumptions in kernel. This basically - * doesn't add a control file, one cannot attempt to offline - * BSP. + * Two known BSP/CPU0 dependencies: Resume from suspend/hibernate + * depends on BSP. PIC interrupts depend on BSP. * - * Also certain PCI quirks require not to enable hotplug control - * for all CPU's. + * If the BSP depencies are under control, one can tell kernel to + * enable BSP hotplug. This basically adds a control file and + * one can attempt to offline BSP. */ - if (num) + if (num == 0 && cpu0_hotpluggable) { + unsigned int irq; + /* + * We won't take down the boot processor on i386 if some + * interrupts only are able to be serviced by the BSP in PIC. + */ + for_each_active_irq(irq) { + if (!IO_APIC_IRQ(irq) && irq_has_action(irq)) { + cpu0_hotpluggable = 0; + break; + } + } + } + if (num || cpu0_hotpluggable) per_cpu(cpu_devices, num).cpu.hotpluggable = 1; return register_cpu(&per_cpu(cpu_devices, num).cpu, num); diff --git a/arch/x86/kernel/trace_clock.c b/arch/x86/kernel/trace_clock.c new file mode 100644 index 000000000000..25b993729f9b --- /dev/null +++ b/arch/x86/kernel/trace_clock.c @@ -0,0 +1,21 @@ +/* + * X86 trace clocks + */ +#include <asm/trace_clock.h> +#include <asm/barrier.h> +#include <asm/msr.h> + +/* + * trace_clock_x86_tsc(): A clock that is just the cycle counter. + * + * Unlike the other clocks, this is not in nanoseconds. + */ +u64 notrace trace_clock_x86_tsc(void) +{ + u64 ret; + + rdtsc_barrier(); + rdtscll(ret); + + return ret; +} diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 8276dc6794cc..eb8586693e0b 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -55,7 +55,7 @@ #include <asm/i387.h> #include <asm/fpu-internal.h> #include <asm/mce.h> -#include <asm/rcu.h> +#include <asm/context_tracking.h> #include <asm/mach_traps.h> diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index cfa5d4f7ca56..06ccb5073a3f 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -77,6 +77,12 @@ unsigned long long sched_clock(void) __attribute__((alias("native_sched_clock"))); #endif +unsigned long long native_read_tsc(void) +{ + return __native_read_tsc(); +} +EXPORT_SYMBOL(native_read_tsc); + int check_tsc_unstable(void) { return tsc_unstable; diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index aafa5557b396..c71025b67462 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -478,6 +478,11 @@ int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) regs->ip = current->utask->xol_vaddr; pre_xol_rip_insn(auprobe, regs, autask); + autask->saved_tf = !!(regs->flags & X86_EFLAGS_TF); + regs->flags |= X86_EFLAGS_TF; + if (test_tsk_thread_flag(current, TIF_BLOCKSTEP)) + set_task_blockstep(current, false); + return 0; } @@ -603,6 +608,16 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) if (auprobe->fixups & UPROBE_FIX_CALL) result = adjust_ret_addr(regs->sp, correction); + /* + * arch_uprobe_pre_xol() doesn't save the state of TIF_BLOCKSTEP + * so we can get an extra SIGTRAP if we do not clear TF. We need + * to examine the opcode to make it right. + */ + if (utask->autask.saved_tf) + send_sig(SIGTRAP, current, 0); + else if (!(auprobe->fixups & UPROBE_FIX_SETF)) + regs->flags &= ~X86_EFLAGS_TF; + return result; } @@ -647,6 +662,10 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) current->thread.trap_nr = utask->autask.saved_trap_nr; handle_riprel_post_xol(auprobe, regs, NULL); instruction_pointer_set(regs, utask->vaddr); + + /* clear TF if it was set by us in arch_uprobe_pre_xol() */ + if (!utask->autask.saved_tf) + regs->flags &= ~X86_EFLAGS_TF; } /* @@ -676,38 +695,3 @@ bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs) send_sig(SIGTRAP, current, 0); return ret; } - -void arch_uprobe_enable_step(struct arch_uprobe *auprobe) -{ - struct task_struct *task = current; - struct arch_uprobe_task *autask = &task->utask->autask; - struct pt_regs *regs = task_pt_regs(task); - - autask->saved_tf = !!(regs->flags & X86_EFLAGS_TF); - - regs->flags |= X86_EFLAGS_TF; - if (test_tsk_thread_flag(task, TIF_BLOCKSTEP)) - set_task_blockstep(task, false); -} - -void arch_uprobe_disable_step(struct arch_uprobe *auprobe) -{ - struct task_struct *task = current; - struct arch_uprobe_task *autask = &task->utask->autask; - bool trapped = (task->utask->state == UTASK_SSTEP_TRAPPED); - struct pt_regs *regs = task_pt_regs(task); - /* - * The state of TIF_BLOCKSTEP was not saved so we can get an extra - * SIGTRAP if we do not clear TF. We need to examine the opcode to - * make it right. - */ - if (unlikely(trapped)) { - if (!autask->saved_tf) - regs->flags &= ~X86_EFLAGS_TF; - } else { - if (autask->saved_tf) - send_sig(SIGTRAP, task, 0); - else if (!(auprobe->fixups & UPROBE_FIX_SETF)) - regs->flags &= ~X86_EFLAGS_TF; - } -} diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 39171cb307ea..bba39bfa1c4b 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -426,8 +426,7 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt) _ASM_EXTABLE(1b, 3b) \ : "=m" ((ctxt)->eflags), "=&r" (_tmp), \ "+a" (*rax), "+d" (*rdx), "+qm"(_ex) \ - : "i" (EFLAGS_MASK), "m" ((ctxt)->src.val), \ - "a" (*rax), "d" (*rdx)); \ + : "i" (EFLAGS_MASK), "m" ((ctxt)->src.val)); \ } while (0) /* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */ diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index b00f6785da74..96b2c6697c9d 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -32,7 +32,6 @@ ifeq ($(CONFIG_X86_32),y) lib-y += checksum_32.o lib-y += strstr_32.o lib-y += string_32.o - lib-y += cmpxchg.o ifneq ($(CONFIG_X86_CMPXCHG64),y) lib-y += cmpxchg8b_emu.o atomic64_386_32.o endif diff --git a/arch/x86/lib/cmpxchg.c b/arch/x86/lib/cmpxchg.c deleted file mode 100644 index 5d619f6df3ee..000000000000 --- a/arch/x86/lib/cmpxchg.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * cmpxchg*() fallbacks for CPU not supporting these instructions - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/module.h> - -#ifndef CONFIG_X86_CMPXCHG -unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) -{ - u8 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u8 *)ptr; - if (prev == old) - *(u8 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u8); - -unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) -{ - u16 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u16 *)ptr; - if (prev == old) - *(u16 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u16); - -unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) -{ - u32 prev; - unsigned long flags; - - /* Poor man's cmpxchg for 386. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u32 *)ptr; - if (prev == old) - *(u32 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_386_u32); -#endif diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S index 6b34d04d096a..176cca67212b 100644 --- a/arch/x86/lib/copy_page_64.S +++ b/arch/x86/lib/copy_page_64.S @@ -5,91 +5,89 @@ #include <asm/alternative-asm.h> ALIGN -copy_page_c: +copy_page_rep: CFI_STARTPROC - movl $4096/8,%ecx - rep movsq + movl $4096/8, %ecx + rep movsq ret CFI_ENDPROC -ENDPROC(copy_page_c) +ENDPROC(copy_page_rep) -/* Don't use streaming store because it's better when the target - ends up in cache. */ - -/* Could vary the prefetch distance based on SMP/UP */ +/* + * Don't use streaming copy unless the CPU indicates X86_FEATURE_REP_GOOD. + * Could vary the prefetch distance based on SMP/UP. +*/ ENTRY(copy_page) CFI_STARTPROC - subq $2*8,%rsp + subq $2*8, %rsp CFI_ADJUST_CFA_OFFSET 2*8 - movq %rbx,(%rsp) + movq %rbx, (%rsp) CFI_REL_OFFSET rbx, 0 - movq %r12,1*8(%rsp) + movq %r12, 1*8(%rsp) CFI_REL_OFFSET r12, 1*8 - movl $(4096/64)-5,%ecx + movl $(4096/64)-5, %ecx .p2align 4 .Loop64: - dec %rcx - - movq (%rsi), %rax - movq 8 (%rsi), %rbx - movq 16 (%rsi), %rdx - movq 24 (%rsi), %r8 - movq 32 (%rsi), %r9 - movq 40 (%rsi), %r10 - movq 48 (%rsi), %r11 - movq 56 (%rsi), %r12 + dec %rcx + movq 0x8*0(%rsi), %rax + movq 0x8*1(%rsi), %rbx + movq 0x8*2(%rsi), %rdx + movq 0x8*3(%rsi), %r8 + movq 0x8*4(%rsi), %r9 + movq 0x8*5(%rsi), %r10 + movq 0x8*6(%rsi), %r11 + movq 0x8*7(%rsi), %r12 prefetcht0 5*64(%rsi) - movq %rax, (%rdi) - movq %rbx, 8 (%rdi) - movq %rdx, 16 (%rdi) - movq %r8, 24 (%rdi) - movq %r9, 32 (%rdi) - movq %r10, 40 (%rdi) - movq %r11, 48 (%rdi) - movq %r12, 56 (%rdi) + movq %rax, 0x8*0(%rdi) + movq %rbx, 0x8*1(%rdi) + movq %rdx, 0x8*2(%rdi) + movq %r8, 0x8*3(%rdi) + movq %r9, 0x8*4(%rdi) + movq %r10, 0x8*5(%rdi) + movq %r11, 0x8*6(%rdi) + movq %r12, 0x8*7(%rdi) - leaq 64 (%rsi), %rsi - leaq 64 (%rdi), %rdi + leaq 64 (%rsi), %rsi + leaq 64 (%rdi), %rdi - jnz .Loop64 + jnz .Loop64 - movl $5,%ecx + movl $5, %ecx .p2align 4 .Loop2: - decl %ecx - - movq (%rsi), %rax - movq 8 (%rsi), %rbx - movq 16 (%rsi), %rdx - movq 24 (%rsi), %r8 - movq 32 (%rsi), %r9 - movq 40 (%rsi), %r10 - movq 48 (%rsi), %r11 - movq 56 (%rsi), %r12 - - movq %rax, (%rdi) - movq %rbx, 8 (%rdi) - movq %rdx, 16 (%rdi) - movq %r8, 24 (%rdi) - movq %r9, 32 (%rdi) - movq %r10, 40 (%rdi) - movq %r11, 48 (%rdi) - movq %r12, 56 (%rdi) - - leaq 64(%rdi),%rdi - leaq 64(%rsi),%rsi - + decl %ecx + + movq 0x8*0(%rsi), %rax + movq 0x8*1(%rsi), %rbx + movq 0x8*2(%rsi), %rdx + movq 0x8*3(%rsi), %r8 + movq 0x8*4(%rsi), %r9 + movq 0x8*5(%rsi), %r10 + movq 0x8*6(%rsi), %r11 + movq 0x8*7(%rsi), %r12 + + movq %rax, 0x8*0(%rdi) + movq %rbx, 0x8*1(%rdi) + movq %rdx, 0x8*2(%rdi) + movq %r8, 0x8*3(%rdi) + movq %r9, 0x8*4(%rdi) + movq %r10, 0x8*5(%rdi) + movq %r11, 0x8*6(%rdi) + movq %r12, 0x8*7(%rdi) + + leaq 64(%rdi), %rdi + leaq 64(%rsi), %rsi jnz .Loop2 - movq (%rsp),%rbx + movq (%rsp), %rbx CFI_RESTORE rbx - movq 1*8(%rsp),%r12 + movq 1*8(%rsp), %r12 CFI_RESTORE r12 - addq $2*8,%rsp + addq $2*8, %rsp CFI_ADJUST_CFA_OFFSET -2*8 ret .Lcopy_page_end: @@ -103,7 +101,7 @@ ENDPROC(copy_page) .section .altinstr_replacement,"ax" 1: .byte 0xeb /* jmp <disp8> */ - .byte (copy_page_c - copy_page) - (2f - 1b) /* offset */ + .byte (copy_page_rep - copy_page) - (2f - 1b) /* offset */ 2: .previous .section .altinstructions,"a" diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c index 98f6d6b68f5a..f0312d746402 100644 --- a/arch/x86/lib/usercopy_32.c +++ b/arch/x86/lib/usercopy_32.c @@ -570,63 +570,6 @@ do { \ unsigned long __copy_to_user_ll(void __user *to, const void *from, unsigned long n) { -#ifndef CONFIG_X86_WP_WORKS_OK - if (unlikely(boot_cpu_data.wp_works_ok == 0) && - ((unsigned long)to) < TASK_SIZE) { - /* - * When we are in an atomic section (see - * mm/filemap.c:file_read_actor), return the full - * length to take the slow path. - */ - if (in_atomic()) - return n; - - /* - * CPU does not honor the WP bit when writing - * from supervisory mode, and due to preemption or SMP, - * the page tables can change at any time. - * Do it manually. Manfred <manfred@colorfullife.com> - */ - while (n) { - unsigned long offset = ((unsigned long)to)%PAGE_SIZE; - unsigned long len = PAGE_SIZE - offset; - int retval; - struct page *pg; - void *maddr; - - if (len > n) - len = n; - -survive: - down_read(¤t->mm->mmap_sem); - retval = get_user_pages(current, current->mm, - (unsigned long)to, 1, 1, 0, &pg, NULL); - - if (retval == -ENOMEM && is_global_init(current)) { - up_read(¤t->mm->mmap_sem); - congestion_wait(BLK_RW_ASYNC, HZ/50); - goto survive; - } - - if (retval != 1) { - up_read(¤t->mm->mmap_sem); - break; - } - - maddr = kmap_atomic(pg); - memcpy(maddr + offset, from, len); - kunmap_atomic(maddr); - set_page_dirty_lock(pg); - put_page(pg); - up_read(¤t->mm->mmap_sem); - - from += len; - to += len; - n -= len; - } - return n; - } -#endif stac(); if (movsl_is_ok(to, from, n)) __copy_user(to, from, n); diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 8e13ecb41bee..7a529cbab7ad 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -18,7 +18,7 @@ #include <asm/pgalloc.h> /* pgd_*(), ... */ #include <asm/kmemcheck.h> /* kmemcheck_*(), ... */ #include <asm/fixmap.h> /* VSYSCALL_START */ -#include <asm/rcu.h> /* exception_enter(), ... */ +#include <asm/context_tracking.h> /* exception_enter(), ... */ /* * Page fault error code bits: diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 937bff5cdaa7..ae1aa71d0115 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -274,42 +274,15 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file, unsigned long pgoff, unsigned long flags) { struct hstate *h = hstate_file(file); - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; - unsigned long start_addr; - - if (len > mm->cached_hole_size) { - start_addr = mm->free_area_cache; - } else { - start_addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - } - -full_search: - addr = ALIGN(start_addr, huge_page_size(h)); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (TASK_SIZE - len < addr) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (!vma || addr + len <= vma->vm_start) { - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - addr = ALIGN(vma->vm_end, huge_page_size(h)); - } + struct vm_unmapped_area_info info; + + info.flags = 0; + info.length = len; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = TASK_SIZE; + info.align_mask = PAGE_MASK & ~huge_page_mask(h); + info.align_offset = 0; + return vm_unmapped_area(&info); } static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file, @@ -317,83 +290,30 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long pgoff, unsigned long flags) { struct hstate *h = hstate_file(file); - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; - unsigned long base = mm->mmap_base; - unsigned long addr = addr0; - unsigned long largest_hole = mm->cached_hole_size; - unsigned long start_addr; - - /* don't allow allocations above current base */ - if (mm->free_area_cache > base) - mm->free_area_cache = base; - - if (len <= largest_hole) { - largest_hole = 0; - mm->free_area_cache = base; - } -try_again: - start_addr = mm->free_area_cache; - - /* make sure it can fit in the remaining address space */ - if (mm->free_area_cache < len) - goto fail; - - /* either no address requested or can't fit in requested address hole */ - addr = (mm->free_area_cache - len) & huge_page_mask(h); - do { - /* - * Lookup failure means no vma is above this address, - * i.e. return with success: - */ - vma = find_vma(mm, addr); - if (!vma) - return addr; + struct vm_unmapped_area_info info; + unsigned long addr; - if (addr + len <= vma->vm_start) { - /* remember the address as a hint for next time */ - mm->cached_hole_size = largest_hole; - return (mm->free_area_cache = addr); - } else if (mm->free_area_cache == vma->vm_end) { - /* pull free_area_cache down to the first hole */ - mm->free_area_cache = vma->vm_start; - mm->cached_hole_size = largest_hole; - } + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = current->mm->mmap_base; + info.align_mask = PAGE_MASK & ~huge_page_mask(h); + info.align_offset = 0; + addr = vm_unmapped_area(&info); - /* remember the largest hole we saw so far */ - if (addr + largest_hole < vma->vm_start) - largest_hole = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = (vma->vm_start - len) & huge_page_mask(h); - } while (len <= vma->vm_start); - -fail: - /* - * if hint left us with no space for the requested - * mapping then try again: - */ - if (start_addr != base) { - mm->free_area_cache = base; - largest_hole = 0; - goto try_again; - } /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->free_area_cache = TASK_UNMAPPED_BASE; - mm->cached_hole_size = ~0UL; - addr = hugetlb_get_unmapped_area_bottomup(file, addr0, - len, pgoff, flags); - - /* - * Restore the topdown base: - */ - mm->free_area_cache = base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = TASK_SIZE; + addr = vm_unmapped_area(&info); + } return addr; } diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 11a58001b4ce..745d66b843c8 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -715,10 +715,7 @@ static void __init test_wp_bit(void) if (!boot_cpu_data.wp_works_ok) { printk(KERN_CONT "No.\n"); -#ifdef CONFIG_X86_WP_WORKS_OK - panic( - "This kernel doesn't support CPU's with broken WP. Recompile it for a 386!"); -#endif + panic("Linux doesn't support CPUs with broken WP."); } else { printk(KERN_CONT "Ok.\n"); } diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 60f926cd8b0e..13a6b29e2e5d 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -104,7 +104,7 @@ static void flush_tlb_func(void *info) return; if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) { - if (f->flush_end == TLB_FLUSH_ALL || !cpu_has_invlpg) + if (f->flush_end == TLB_FLUSH_ALL) local_flush_tlb(); else if (!f->flush_end) __flush_tlb_single(f->flush_start); @@ -337,10 +337,8 @@ static const struct file_operations fops_tlbflush = { static int __cpuinit create_tlb_flushall_shift(void) { - if (cpu_has_invlpg) { - debugfs_create_file("tlb_flushall_shift", S_IRUSR | S_IWUSR, - arch_debugfs_dir, NULL, &fops_tlbflush); - } + debugfs_create_file("tlb_flushall_shift", S_IRUSR | S_IWUSR, + arch_debugfs_dir, NULL, &fops_tlbflush); return 0; } late_initcall(create_tlb_flushall_shift); diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index 92525cb8e54c..f8ab4945892e 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -105,8 +105,11 @@ static void ce4100_serial_fixup(int port, struct uart_port *up, up->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); up->membase += up->mapbase & ~PAGE_MASK; + up->mapbase += port * 0x100; + up->membase += port * 0x100; up->iotype = UPIO_MEM32; up->regshift = 2; + up->irq = 4; } #endif up->iobase = 0; diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 218cdb16163c..120cee1c3f8d 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -21,6 +21,7 @@ #include <asm/suspend.h> #include <asm/debugreg.h> #include <asm/fpu-internal.h> /* pcntxt_mask */ +#include <asm/cpu.h> #ifdef CONFIG_X86_32 static struct saved_context saved_context; @@ -237,3 +238,84 @@ void restore_processor_state(void) #ifdef CONFIG_X86_32 EXPORT_SYMBOL(restore_processor_state); #endif + +/* + * When bsp_check() is called in hibernate and suspend, cpu hotplug + * is disabled already. So it's unnessary to handle race condition between + * cpumask query and cpu hotplug. + */ +static int bsp_check(void) +{ + if (cpumask_first(cpu_online_mask) != 0) { + pr_warn("CPU0 is offline.\n"); + return -ENODEV; + } + + return 0; +} + +static int bsp_pm_callback(struct notifier_block *nb, unsigned long action, + void *ptr) +{ + int ret = 0; + + switch (action) { + case PM_SUSPEND_PREPARE: + case PM_HIBERNATION_PREPARE: + ret = bsp_check(); + break; +#ifdef CONFIG_DEBUG_HOTPLUG_CPU0 + case PM_RESTORE_PREPARE: + /* + * When system resumes from hibernation, online CPU0 because + * 1. it's required for resume and + * 2. the CPU was online before hibernation + */ + if (!cpu_online(0)) + _debug_hotplug_cpu(0, 1); + break; + case PM_POST_RESTORE: + /* + * When a resume really happens, this code won't be called. + * + * This code is called only when user space hibernation software + * prepares for snapshot device during boot time. So we just + * call _debug_hotplug_cpu() to restore to CPU0's state prior to + * preparing the snapshot device. + * + * This works for normal boot case in our CPU0 hotplug debug + * mode, i.e. CPU0 is offline and user mode hibernation + * software initializes during boot time. + * + * If CPU0 is online and user application accesses snapshot + * device after boot time, this will offline CPU0 and user may + * see different CPU0 state before and after accessing + * the snapshot device. But hopefully this is not a case when + * user debugging CPU0 hotplug. Even if users hit this case, + * they can easily online CPU0 back. + * + * To simplify this debug code, we only consider normal boot + * case. Otherwise we need to remember CPU0's state and restore + * to that state and resolve racy conditions etc. + */ + _debug_hotplug_cpu(0, 0); + break; +#endif + default: + break; + } + return notifier_from_errno(ret); +} + +static int __init bsp_pm_check_init(void) +{ + /* + * Set this bsp_pm_callback as lower priority than + * cpu_hotplug_pm_callback. So cpu_hotplug_pm_callback will be called + * earlier to disable cpu hotplug before bsp online check. + */ + pm_notifier(bsp_pm_callback, -INT_MAX); + return 0; +} + +core_initcall(bsp_pm_check_init); diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk index ddcf39b1a18d..e6773dc8ac41 100644 --- a/arch/x86/tools/gen-insn-attr-x86.awk +++ b/arch/x86/tools/gen-insn-attr-x86.awk @@ -356,7 +356,7 @@ END { exit 1 # print escape opcode map's array print "/* Escape opcode map array */" - print "const insn_attr_t const *inat_escape_tables[INAT_ESC_MAX + 1]" \ + print "const insn_attr_t * const inat_escape_tables[INAT_ESC_MAX + 1]" \ "[INAT_LSTPFX_MAX + 1] = {" for (i = 0; i < geid; i++) for (j = 0; j < max_lprefix; j++) @@ -365,7 +365,7 @@ END { print "};\n" # print group opcode map's array print "/* Group opcode map array */" - print "const insn_attr_t const *inat_group_tables[INAT_GRP_MAX + 1]"\ + print "const insn_attr_t * const inat_group_tables[INAT_GRP_MAX + 1]"\ "[INAT_LSTPFX_MAX + 1] = {" for (i = 0; i < ggid; i++) for (j = 0; j < max_lprefix; j++) @@ -374,7 +374,7 @@ END { print "};\n" # print AVX opcode map's array print "/* AVX opcode map array */" - print "const insn_attr_t const *inat_avx_tables[X86_VEX_M_MAX + 1]"\ + print "const insn_attr_t * const inat_avx_tables[X86_VEX_M_MAX + 1]"\ "[INAT_LSTPFX_MAX + 1] = {" for (i = 0; i < gaid; i++) for (j = 0; j < max_lprefix; j++) diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig index 8f51c39750d1..983997041963 100644 --- a/arch/x86/um/Kconfig +++ b/arch/x86/um/Kconfig @@ -32,7 +32,7 @@ config X86_64 select MODULES_USE_ELF_RELA config RWSEM_XCHGADD_ALGORITHM - def_bool X86_XADD && 64BIT + def_bool 64BIT config RWSEM_GENERIC_SPINLOCK def_bool !RWSEM_XCHGADD_ALGORITHM diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 00aaf047b39f..431e87544411 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -141,7 +141,7 @@ static unsigned long vdso_addr(unsigned long start, unsigned len) * unaligned here as a result of stack start randomization. */ addr = PAGE_ALIGN(addr); - addr = align_addr(addr, NULL, ALIGN_VDSO); + addr = align_vdso_addr(addr); return addr; } diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index fdce49c7aff6..9a6775c9ddca 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -7,7 +7,7 @@ config XEN select PARAVIRT select PARAVIRT_CLOCK depends on X86_64 || (X86_32 && X86_PAE && !X86_VISWS) - depends on X86_CMPXCHG && X86_TSC + depends on X86_TSC help This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index 6d1302789995..095f0a2244f7 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -25,4 +25,5 @@ generic-y += siginfo.h generic-y += statfs.h generic-y += termios.h generic-y += topology.h +generic-y += trace_clock.h generic-y += xor.h diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h index 2aa4cd9f0cec..b4cb1100c0fb 100644 --- a/arch/xtensa/include/uapi/asm/ioctls.h +++ b/arch/xtensa/include/uapi/asm/ioctls.h @@ -101,6 +101,9 @@ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ #define TIOCVHANGUP _IO('T', 0x37) +#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */ +#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */ +#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */ #define TIOCSERCONFIG _IO('T', 83) #define TIOCSERGWILD _IOR('T', 84, int) diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h index 25bc6c1309c3..00eed6786d7e 100644 --- a/arch/xtensa/include/uapi/asm/mman.h +++ b/arch/xtensa/include/uapi/asm/mman.h @@ -93,4 +93,15 @@ /* compatibility flags */ #define MAP_FILE 0 +/* + * When MAP_HUGETLB is set bits [26:31] encode the log2 of the huge page size. + * This gives us 6 bits, which is enough until someone invents 128 bit address + * spaces. + * + * Assume these are all power of twos. + * When 0 use the default page size. + */ +#define MAP_HUGE_SHIFT 26 +#define MAP_HUGE_MASK 0x3f + #endif /* _XTENSA_MMAN_H */ diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 7e74895eee04..8207a119eee9 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -221,6 +221,7 @@ static __exit void rs_exit(void) printk("ISS_SERIAL: failed to unregister serial driver (%d)\n", error); put_tty_driver(serial_driver); + tty_port_destroy(&serial_port); } |
