diff options
Diffstat (limited to 'arch')
477 files changed, 15546 insertions, 6260 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 98922f7d2d12..e39caa8b0c93 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -10,6 +10,7 @@ config ARM default y select HAVE_AOUT select HAVE_IDE + select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select GENERIC_ATOMIC64 if (!CPU_32v6K) @@ -24,6 +25,7 @@ config ARM select HAVE_KERNEL_LZMA select HAVE_PERF_EVENTS select PERF_USE_VMALLOC + select HAVE_REGS_AND_STACK_ACCESS_API help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -55,7 +57,7 @@ config GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS_BROADCAST bool depends on GENERIC_CLOCKEVENTS - default y if SMP && !LOCAL_TIMERS + default y if SMP config HAVE_TCM bool @@ -301,6 +303,7 @@ config ARCH_CNS3XXX select CPU_V6 select GENERIC_CLOCKEVENTS select ARM_GIC + select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. @@ -439,21 +442,6 @@ config ARCH_IXP4XX help Support for Intel's IXP4XX (XScale) family of processors. -config ARCH_L7200 - bool "LinkUp-L7200" - select CPU_ARM720T - select FIQ - select ARCH_USES_GETTIMEOFFSET - help - Say Y here if you intend to run this kernel on a LinkUp Systems - L7200 Software Development Board which uses an ARM720T processor. - Information on this board can be obtained at: - - <http://www.linkupsys.com/> - - If you have any questions or comments about the Linux kernel port - to this board, send e-mail to <sjhill@cotw.com>. - config ARCH_DOVE bool "Marvell Dove" select PCI @@ -482,6 +470,19 @@ config ARCH_LOKI help Support for the Marvell Loki (88RC8480) SoC. +config ARCH_LPC32XX + bool "NXP LPC32XX" + select CPU_ARM926T + select ARCH_REQUIRE_GPIOLIB + select HAVE_IDE + select ARM_AMBA + select USB_ARCH_HAS_OHCI + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + help + Support for the NXP LPC32XX family of processors + config ARCH_MV78XX0 bool "Marvell MV78xx0" select CPU_FEROCEON @@ -586,6 +587,7 @@ config ARCH_MSM bool "Qualcomm MSM" select HAVE_CLK select GENERIC_CLOCKEVENTS + select ARCH_REQUIRE_GPIOLIB help Support for Qualcomm MSM/QSD based systems. This runs on the apps processor of the MSM/QSD and depends on a shared memory @@ -719,7 +721,6 @@ config ARCH_SHARK config ARCH_LH7A40X bool "Sharp LH7A40X" select CPU_ARM922T - select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM select ARCH_USES_GETTIMEOFFSET help @@ -845,6 +846,8 @@ source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-loki/Kconfig" +source "arch/arm/mach-lpc32xx/Kconfig" + source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" @@ -1031,11 +1034,6 @@ endmenu source "arch/arm/common/Kconfig" -config FORCE_MAX_ZONEORDER - int - depends on SA1111 - default "9" - menu "Bus support" config ARM_AMBA @@ -1060,7 +1058,7 @@ config ISA_DMA_API bool config PCI - bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE + bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -1172,9 +1170,10 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ - REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) + REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ + ARCH_U8500 || ARCH_VEXPRESS_CA9X4) default y - select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1185,10 +1184,10 @@ source kernel/Kconfig.preempt config HZ int - default 128 if ARCH_L7200 default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 + default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE default 100 config THUMB2_KERNEL @@ -1241,10 +1240,6 @@ config OABI_COMPAT config ARCH_HAS_HOLES_MEMORYMODEL bool -# Discontigmem is deprecated -config ARCH_DISCONTIGMEM_ENABLE - bool - config ARCH_SPARSEMEM_ENABLE bool @@ -1252,13 +1247,7 @@ config ARCH_SPARSEMEM_DEFAULT def_bool ARCH_SPARSEMEM_ENABLE config ARCH_SELECT_MEMORY_MODEL - def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE - -config NODES_SHIFT - int - default "4" if ARCH_LH7A40X - default "2" - depends on NEED_MULTIPLE_NODES + def_bool ARCH_SPARSEMEM_ENABLE config HIGHMEM bool "High Memory Support (EXPERIMENTAL)" @@ -1290,8 +1279,33 @@ config HW_PERF_EVENTS Enable hardware performance counter support for perf events. If disabled, perf events will use software events only. +config SPARSE_IRQ + def_bool n + help + This enables support for sparse irqs. This is useful in general + as most CPUs have a fairly sparse array of IRQ vectors, which + the irq_desc then maps directly on to. Systems with a high + number of off-chip IRQs will want to treat this as + experimental until they have been independently verified. + source "mm/Kconfig" +config FORCE_MAX_ZONEORDER + int "Maximum zone order" if ARCH_SHMOBILE + range 11 64 if ARCH_SHMOBILE + default "9" if SA1111 + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_EBSA110 || \ @@ -1375,6 +1389,24 @@ config UACCESS_WITH_MEMCPY However, if the CPU data cache is using a write-allocate mode, this option is unlikely to provide any performance gain. +config CC_STACKPROTECTOR + bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" + help + This option turns on the -fstack-protector GCC feature. This + feature puts, at the beginning of functions, a canary value on + the stack just before the return address, and validates + the value just before actually returning. Stack based buffer + overflows (that need to overwrite this return address) now also + overwrite the canary, which gets detected and the attack is then + neutralized via a kernel panic. + This feature requires gcc version 4.2 or above. + +config DEPRECATED_PARAM_STRUCT + bool "Provide old way to pass kernel parameters" + help + This was deprecated in 2001 and announced to live on for 5 years. + Some old boot loaders still use this way. + endmenu menu "Boot options" @@ -1485,6 +1517,105 @@ config ATAGS_PROC Should the atags used to boot the kernel be exported in an "atags" file in procfs. Useful with kexec. +config AUTO_ZRELADDR + bool "Auto calculation of the decompressed kernel image address" + depends on !ZBOOT_ROM && !ARCH_U300 + help + ZRELADDR is the physical address where the decompressed kernel + image will be placed. If AUTO_ZRELADDR is selected, the address + will be determined at run-time by masking the current IP with + 0xf8000000. This assumes the zImage being placed in the first 128MB + from start of memory. + +config ZRELADDR + hex "Physical address of the decompressed kernel image" + depends on !AUTO_ZRELADDR + default 0x00008000 if ARCH_BCMRING ||\ + ARCH_CNS3XXX ||\ + ARCH_DOVE ||\ + ARCH_EBSA110 ||\ + ARCH_FOOTBRIDGE ||\ + ARCH_INTEGRATOR ||\ + ARCH_IOP13XX ||\ + ARCH_IOP33X ||\ + ARCH_IXP2000 ||\ + ARCH_IXP23XX ||\ + ARCH_IXP4XX ||\ + ARCH_KIRKWOOD ||\ + ARCH_KS8695 ||\ + ARCH_LOKI ||\ + ARCH_MMP ||\ + ARCH_MV78XX0 ||\ + ARCH_NOMADIK ||\ + ARCH_NUC93X ||\ + ARCH_NS9XXX ||\ + ARCH_ORION5X ||\ + ARCH_SPEAR3XX ||\ + ARCH_SPEAR6XX ||\ + ARCH_U8500 ||\ + ARCH_VERSATILE ||\ + ARCH_W90X900 + default 0x08008000 if ARCH_MX1 ||\ + ARCH_SHARK + default 0x10008000 if ARCH_MSM ||\ + ARCH_OMAP1 ||\ + ARCH_RPC + default 0x20008000 if ARCH_S5P6440 ||\ + ARCH_S5P6442 ||\ + ARCH_S5PC100 ||\ + ARCH_S5PV210 + default 0x30008000 if ARCH_S3C2410 ||\ + ARCH_S3C2400 ||\ + ARCH_S3C2412 ||\ + ARCH_S3C2416 ||\ + ARCH_S3C2440 ||\ + ARCH_S3C2443 + default 0x40008000 if ARCH_STMP378X ||\ + ARCH_STMP37XX ||\ + ARCH_SH7372 ||\ + ARCH_SH7377 + default 0x50008000 if ARCH_S3C64XX ||\ + ARCH_SH7367 + default 0x60008000 if ARCH_VEXPRESS + default 0x80008000 if ARCH_MX25 ||\ + ARCH_MX3 ||\ + ARCH_NETX ||\ + ARCH_OMAP2PLUS ||\ + ARCH_PNX4008 + default 0x90008000 if ARCH_MX5 ||\ + ARCH_MX91231 + default 0xa0008000 if ARCH_IOP32X ||\ + ARCH_PXA ||\ + MACH_MX27 + default 0xc0008000 if ARCH_LH7A40X ||\ + MACH_MX21 + default 0xf0008000 if ARCH_AAEC2000 ||\ + ARCH_L7200 + default 0xc0028000 if ARCH_CLPS711X + default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45) + default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45) + default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX + default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX + default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET + default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET + default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET + default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET + default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET + default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP + default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP + default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET + default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET + default 0xc0208000 if ARCH_SA1100 && SA1111 + default 0xc0008000 if ARCH_SA1100 && !SA1111 + default 0x30108000 if ARCH_S3C2410 && PM_H1940 + default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM + default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM + help + ZRELADDR is the physical address where the decompressed kernel + image will be placed. ZRELADDR has to be specified when the + assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is + selected. + endmenu menu "CPU Power Management" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 64ba313724d2..63d998e8c672 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -34,6 +34,10 @@ ifeq ($(CONFIG_FRAME_POINTER),y) KBUILD_CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog endif +ifeq ($(CONFIG_CC_STACKPROTECTOR),y) +KBUILD_CFLAGS +=-fstack-protector +endif + ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) KBUILD_CPPFLAGS += -mbig-endian AS += -EB @@ -139,14 +143,14 @@ machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 -machine-$(CONFIG_ARCH_L7200) := l7200 machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_LOKI) := loki +machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx machine-$(CONFIG_ARCH_MMP) := mmp machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 -machine-$(CONFIG_ARCH_MX1) := mx1 -machine-$(CONFIG_ARCH_MX2) := mx2 +machine-$(CONFIG_ARCH_MX1) := imx +machine-$(CONFIG_ARCH_MX2) := imx machine-$(CONFIG_ARCH_MX25) := mx25 machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_MX5) := mx5 diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4a590f4113e2..f705213caa88 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -14,18 +14,16 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh ifneq ($(MACHINE),) -include $(srctree)/$(MACHINE)/Makefile.boot +-include $(srctree)/$(MACHINE)/Makefile.boot endif # Note: the following conditions must always be true: -# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM -ZRELADDR := $(zreladdr-y) PARAMS_PHYS := $(params_phys-y) INITRD_PHYS := $(initrd_phys-y) -export ZRELADDR INITRD_PHYS PARAMS_PHYS +export INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage @@ -67,7 +65,7 @@ quiet_cmd_uimage = UIMAGE $@ ifeq ($(CONFIG_ZBOOT_ROM),y) $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) else -$(obj)/uImage: LOADADDR=$(ZRELADDR) +$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR) endif ifeq ($(CONFIG_THUMB2_KERNEL),y) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 864a002137fe..7636c9b3f9a7 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -4,6 +4,7 @@ # create a compressed vmlinuz image from the original vmlinux # +AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) HEAD = head.o OBJS = misc.o decompress.o FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c @@ -19,10 +20,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y) OBJS += head-shark.o ofw-shark.o endif -ifeq ($(CONFIG_ARCH_L7200),y) -OBJS += head-l7200.o -endif - ifeq ($(CONFIG_ARCH_P720T),y) # Borrow this code from SA1100 OBJS += head-sa1100.o @@ -82,19 +79,9 @@ endif EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := -Wa,-march=all -# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via -# linker symbols. We only define initrd_phys and params_phys if the -# machine class defined the corresponding makefile variable. -LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR) ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif -ifneq ($(INITRD_PHYS),) -LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS) -endif -ifneq ($(PARAMS_PHYS),) -LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS) -endif # ? LDFLAGS_vmlinux += -p # Report unresolved symbol references diff --git a/arch/arm/boot/compressed/Makefile.debug b/arch/arm/boot/compressed/Makefile.debug deleted file mode 100644 index 491a037b2973..000000000000 --- a/arch/arm/boot/compressed/Makefile.debug +++ /dev/null @@ -1,23 +0,0 @@ -# -# linux/arch/arm/boot/compressed/Makefile -# -# create a compressed vmlinux image from the original vmlinux -# - -COMPRESSED_EXTRA=../../lib/ll_char_wr.o -OBJECTS=misc-debug.o ll_char_wr.aout.o - -CFLAGS=-D__KERNEL__ -O2 -DSTDC_HEADERS -DSTANDALONE_DEBUG -Wall -I../../../../include -c - -test-gzip: piggy.aout.o $(OBJECTS) - $(CC) -o $@ $(OBJECTS) piggy.aout.o - -misc-debug.o: misc.c - $(CC) $(CFLAGS) -o $@ misc.c - -piggy.aout.o: piggy.o - arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux piggy.o piggy.aout.o - -ll_char_wr.aout.o: $(COMPRESSED_EXTRA) - arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux $(COMPRESSED_EXTRA) ll_char_wr.aout.o - diff --git a/arch/arm/boot/compressed/head-l7200.S b/arch/arm/boot/compressed/head-l7200.S deleted file mode 100644 index d0e3b20856cd..000000000000 --- a/arch/arm/boot/compressed/head-l7200.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/head-l7200.S - * - * Copyright (C) 2000 Steve Hill <sjhill@cotw.com> - * - * Some code borrowed from Nicolas Pitre's 'head-sa1100.S' file. This - * is merged with head.S by the linker. - */ - -#include <asm/mach-types.h> - -#ifndef CONFIG_ARCH_L7200 -#error What am I doing here... -#endif - - .section ".start", "ax" - -__L7200_start: - mov r0, #0x00100000 @ FLASH address of initrd - mov r2, #0xf1000000 @ RAM address of initrd - add r3, r2, #0x00700000 @ Size of initrd -1: - ldmia r0!, {r4, r5, r6, r7} - stmia r2!, {r4, r5, r6, r7} - cmp r2, r3 - ble 1b - - mov r8, #0 @ Zero it out - mov r7, #MACH_TYPE_L7200 @ Set architecture ID diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c5191b1532e8..abf4d65acf62 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -170,9 +170,16 @@ not_angel: .text adr r0, LC0 - ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp}) - THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} ) + ARM( ldmia r0, {r1, r2, r3, r5, r6, r11, ip, sp}) + THUMB( ldmia r0, {r1, r2, r3, r5, r6, r11, ip} ) THUMB( ldr sp, [r0, #32] ) +#ifdef CONFIG_AUTO_ZRELADDR + @ determine final kernel image address + and r4, pc, #0xf8000000 + add r4, r4, #TEXT_OFFSET +#else + ldr r4, =CONFIG_ZRELADDR +#endif subs r0, r0, r1 @ calculate the delta offset @ if delta is zero, we are @@ -310,18 +317,17 @@ wont_overwrite: mov r0, r4 LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 - .word zreladdr @ r4 .word _start @ r5 .word _image_size @ r6 .word _got_start @ r11 .word _got_end @ ip - .word user_stack+4096 @ sp + .word user_stack_end @ sp LC1: .word reloc_end - reloc_start .size LC0, . - LC0 #ifdef CONFIG_ARCH_RPC .globl params -params: ldr r0, =params_phys +params: ldr r0, =0x10000100 @ params_phys for RPC mov pc, lr .ltorg .align @@ -339,9 +345,8 @@ params: ldr r0, =params_phys * r4 = kernel execution address * r7 = architecture number * r8 = atags pointer - * r9 = run-time address of "start" (???) * On exit, - * r1, r2, r3, r9, r10, r12 corrupted + * r0, r1, r2, r3, r9, r10, r12 corrupted * This routine must preserve: * r4, r5, r6, r7, r8 */ @@ -396,12 +401,18 @@ __armv3_mpu_cache_on: mov r0, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 + /* + * ?? ARMv3 MMU does not allow reading the control register, + * does this really work on ARMv3 MPU? + */ mrc p15, 0, r0, c1, c0, 0 @ read control reg @ .... .... .... WC.M orr r0, r0, #0x000d @ .... .... .... 11.1 + /* ?? this overwrites the value constructed above? */ mov r0, #0 mcr p15, 0, r0, c1, c0, 0 @ write control reg + /* ?? invalidate for the second time? */ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 mov pc, lr @@ -771,8 +782,10 @@ proc_types: * Turn off the Cache and MMU. ARMv3 does not support * reading the control register, but ARMv4 does. * - * On exit, r0, r1, r2, r3, r9, r12 corrupted - * This routine must preserve: r4, r6, r7 + * On exit, + * r0, r1, r2, r3, r9, r12 corrupted + * This routine must preserve: + * r4, r6, r7 */ .align 5 cache_off: mov r3, #12 @ cache_off function @@ -845,7 +858,7 @@ __armv3_mmu_cache_off: * Clean and flush the cache to maintain consistency. * * On exit, - * r1, r2, r3, r9, r11, r12 corrupted + * r1, r2, r3, r9, r10, r11, r12 corrupted * This routine must preserve: * r0, r4, r5, r6, r7 */ @@ -988,7 +1001,7 @@ no_cache_id: __armv3_mmu_cache_flush: __armv3_mpu_cache_flush: mov r1, #0 - mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 + mcr p15, 0, r1, c7, c0, 0 @ invalidate whole cache v3 mov pc, lr /* @@ -1001,6 +1014,7 @@ __armv3_mpu_cache_flush: phexbuf: .space 12 .size phexbuf, . - phexbuf +@ phex corrupts {r0, r1, r2, r3} phex: adr r3, phexbuf mov r2, #0 strb r2, [r3, r1] @@ -1015,6 +1029,7 @@ phex: adr r3, phexbuf strb r2, [r3, r1] b 1b +@ puts corrupts {r0, r1, r2, r3} puts: loadsp r3, r1 1: ldrb r2, [r0], #1 teq r2, #0 @@ -1029,12 +1044,14 @@ puts: loadsp r3, r1 teq r0, #0 bne 1b mov pc, lr +@ putc corrupts {r0, r1, r2, r3} putc: mov r2, r0 mov r0, #0 loadsp r3, r1 b 2b +@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr} memdump: mov r12, r0 mov r10, lr mov r11, #0 @@ -1070,3 +1087,4 @@ reloc_end: .align .section ".stack", "w" user_stack: .space 4096 +user_stack_end: diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index d2b2ef41cd4f..e653a6d3c8d9 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -28,9 +28,6 @@ unsigned int __machine_arch_type; #include <asm/unaligned.h> -#ifdef STANDALONE_DEBUG -#define putstr printf -#else static void putstr(const char *ptr); extern void error(char *x); @@ -116,7 +113,6 @@ static void putstr(const char *ptr) flush(); } -#endif void *memcpy(void *__dest, __const void *__src, size_t __n) { @@ -186,7 +182,6 @@ asmlinkage void __div0(void) extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)); -#ifndef STANDALONE_DEBUG unsigned long decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, @@ -211,18 +206,3 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, putstr(" done, booting the kernel.\n"); return output_ptr; } -#else - -char output_buffer[1500*1024]; - -int main() -{ - output_data = output_buffer; - - putstr("Uncompressing Linux..."); - decompress(input_data, input_data_end - input_data, - NULL, NULL, output_data, NULL, error); - putstr("done.\n"); - return 0; -} -#endif diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 337741f734ac..7dfa9a85bc0c 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -108,6 +108,51 @@ static void gic_unmask_irq(unsigned int irq) spin_unlock(&irq_controller_lock); } +static int gic_set_type(unsigned int irq, unsigned int type) +{ + void __iomem *base = gic_dist_base(irq); + unsigned int gicirq = gic_irq(irq); + u32 enablemask = 1 << (gicirq % 32); + u32 enableoff = (gicirq / 32) * 4; + u32 confmask = 0x2 << ((gicirq % 16) * 2); + u32 confoff = (gicirq / 16) * 4; + bool enabled = false; + u32 val; + + /* Interrupt configuration for SGIs can't be changed */ + if (gicirq < 16) + return -EINVAL; + + if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) + return -EINVAL; + + spin_lock(&irq_controller_lock); + + val = readl(base + GIC_DIST_CONFIG + confoff); + if (type == IRQ_TYPE_LEVEL_HIGH) + val &= ~confmask; + else if (type == IRQ_TYPE_EDGE_RISING) + val |= confmask; + + /* + * As recommended by the spec, disable the interrupt before changing + * the configuration + */ + if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) { + writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff); + enabled = true; + } + + writel(val, base + GIC_DIST_CONFIG + confoff); + + if (enabled) + writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); + + spin_unlock(&irq_controller_lock); + + return 0; +} + #ifdef CONFIG_SMP static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) { @@ -161,6 +206,7 @@ static struct irq_chip gic_chip = { .ack = gic_ack_irq, .mask = gic_mask_irq, .unmask = gic_unmask_irq, + .set_type = gic_set_type, #ifdef CONFIG_SMP .set_affinity = gic_set_cpu, #endif diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 9eaf65f43642..517d50ddbeb3 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -185,13 +185,10 @@ static struct sa1111_dev_info sa1111_devices[] = { }, }; -void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes) +void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes) { unsigned int sz = SZ_1M >> PAGE_SHIFT; - if (node != 0) - sz = 0; - size[1] = size[0] - sz; size[0] = sz; } diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index f2e3a9088df6..ccc9c9959b82 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -13,11 +13,19 @@ CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y +CONFIG_MACH_ESATA_SHEEVAPLUG=y +CONFIG_MACH_GURUPLUG=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y +CONFIG_MACH_OPENRD_ULTIMATE=y CONFIG_MACH_NETSPACE_V2=y +CONFIG_MACH_INETSPACE_V2=y +CONFIG_MACH_NETSPACE_MAX_V2=y +CONFIG_MACH_NET2BIG_V2=y +CONFIG_MACH_NET5BIG_V2=y +CONFIG_MACH_T5325=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig deleted file mode 100644 index 816fc42884c9..000000000000 --- a/arch/arm/configs/lusl7200_defconfig +++ /dev/null @@ -1,23 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_HOTPLUG is not set -CONFIG_MODULES=y -CONFIG_ARCH_L7200=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x00010000 -CONFIG_ZBOOT_ROM_BSS=0xf03e0000 -CONFIG_ZBOOT_ROM=y -CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M" -CONFIG_BINFMT_AOUT=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_INPUT is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_VT is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_EXT2_FS=y -CONFIG_DEBUG_USER=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 51662feb9f1d..6750b8e45a49 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -121,4 +121,8 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); extern void elf_set_personality(const struct elf32_hdr *); #define SET_PERSONALITY(ex) elf_set_personality(&(ex)) +struct mm_struct; +extern unsigned long arch_randomize_brk(struct mm_struct *mm); +#define arch_randomize_brk arch_randomize_brk + #endif diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h index f7bd52b1c365..c1062c317103 100644 --- a/arch/arm/include/asm/hwcap.h +++ b/arch/arm/include/asm/hwcap.h @@ -19,6 +19,7 @@ #define HWCAP_NEON 4096 #define HWCAP_VFPv3 8192 #define HWCAP_VFPv3D16 16384 +#define HWCAP_TLS 32768 #if defined(__KERNEL__) && !defined(__ASSEMBLY__) /* diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 237282f7c762..2721a5814cb9 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -7,6 +7,8 @@ #define irq_canonicalize(i) (i) #endif +#define NR_IRQS_LEGACY 16 + /* * Use this value to indicate lack of interrupt * capability diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h index df15a0dc228e..8ec9ef5c3c7b 100644 --- a/arch/arm/include/asm/kexec.h +++ b/arch/arm/include/asm/kexec.h @@ -19,10 +19,26 @@ #ifndef __ASSEMBLY__ -struct kimage; -/* Provide a dummy definition to avoid build failures. */ +/** + * crash_setup_regs() - save registers for the panic kernel + * @newregs: registers are saved here + * @oldregs: registers to be saved (may be %NULL) + * + * Function copies machine registers from @oldregs to @newregs. If @oldregs is + * %NULL then current registers are stored there. + */ static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) { } + struct pt_regs *oldregs) +{ + if (oldregs) { + memcpy(newregs, oldregs, sizeof(*newregs)); + } else { + __asm__ __volatile__ ("stmia %0, {r0 - r15}" + : : "r" (&newregs->ARM_r0)); + __asm__ __volatile__ ("mrs %0, cpsr" + : "=r" (newregs->ARM_cpsr)); + } +} #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index c59842dc7cb8..8a0dd18ba642 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -20,6 +20,7 @@ struct machine_desc { * by assembler code in head.S, head-common.S */ unsigned int nr; /* architecture number */ + unsigned int nr_irqs; /* number of IRQs */ unsigned int phys_io; /* start of physical io */ unsigned int io_pg_offst; /* byte offset for io * page tabe entry */ @@ -37,6 +38,7 @@ struct machine_desc { void (*fixup)(struct machine_desc *, struct tag *, char **, struct meminfo *); + void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ void (*init_irq)(void); struct sys_timer *timer; /* system tick timer */ diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 8920b2d6e3b8..ce3eee9fe26c 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -17,6 +17,7 @@ struct seq_file; /* * This is internal. Do not use it. */ +extern unsigned int arch_nr_irqs; extern void (*init_arch_irq)(void); extern void init_FIQ(void); extern int show_fiq_list(struct seq_file *, void *); diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 742c2aaeb020..d2fedb5aeb1f 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -27,6 +27,8 @@ struct map_desc { #define MT_MEMORY 9 #define MT_ROM 10 #define MT_MEMORY_NONCACHED 11 +#define MT_MEMORY_DTCM 12 +#define MT_MEMORY_ITCM 13 #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 52f0da1e97df..16330bd0657c 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -46,6 +46,7 @@ struct pci_sys_data { /* IRQ mapping */ int (*map_irq)(struct pci_dev *, u8, u8); struct hw_pci *hw; + void *private_data; /* platform controller private data */ }; /* diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h new file mode 100644 index 000000000000..fdbc43b2e6c0 --- /dev/null +++ b/arch/arm/include/asm/memblock.h @@ -0,0 +1,16 @@ +#ifndef _ASM_ARM_MEMBLOCK_H +#define _ASM_ARM_MEMBLOCK_H + +#ifdef CONFIG_MMU +extern phys_addr_t lowmem_end_addr; +#define MEMBLOCK_REAL_LIMIT lowmem_end_addr +#else +#define MEMBLOCK_REAL_LIMIT 0 +#endif + +struct meminfo; +struct machine_desc; + +extern void arm_memblock_init(struct meminfo *, struct machine_desc *); + +#endif diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 4312ee5e3d0b..23c2e8e5c0fa 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -124,6 +124,15 @@ #endif /* !CONFIG_MMU */ /* + * We fix the TCM memories max 32 KiB ITCM resp DTCM at these + * locations + */ +#ifdef CONFIG_HAVE_TCM +#define ITCM_OFFSET UL(0xfffe0000) +#define DTCM_OFFSET UL(0xfffe8000) +#endif + +/* * Physical vs virtual RAM address space conversion. These are * private definitions which should NOT be used outside memory.h * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. @@ -158,7 +167,7 @@ #endif #ifndef arch_adjust_zones -#define arch_adjust_zones(node,size,holes) do { } while (0) +#define arch_adjust_zones(size,holes) do { } while (0) #elif !defined(CONFIG_ZONE_DMA) #error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA" #endif @@ -234,76 +243,11 @@ static inline __deprecated void *bus_to_virt(unsigned long x) * virt_to_page(k) convert a _valid_ virtual address to struct page * * virt_addr_valid(k) indicates whether a virtual address is valid */ -#ifndef CONFIG_DISCONTIGMEM - #define ARCH_PFN_OFFSET PHYS_PFN_OFFSET #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) -#define PHYS_TO_NID(addr) (0) - -#else /* CONFIG_DISCONTIGMEM */ - -/* - * This is more complex. We have a set of mem_map arrays spread - * around in memory. - */ -#include <linux/numa.h> - -#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn) -#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT) - -#define virt_to_page(kaddr) \ - (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr)) - -#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES) - -/* - * Common discontigmem stuff. - * PHYS_TO_NID is used by the ARM kernel/setup.c - */ -#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT) - -/* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and returns the mem_map of that node. - */ -#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) - -/* - * Given a page frame number, find the owning node of the memory - * and returns the mem_map of that node. - */ -#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -#ifdef NODE_MEM_SIZE_BITS -#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1) - -/* - * Given a kernel address, find the home node of the underlying memory. - */ -#define KVADDR_TO_NID(addr) \ - (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS) - -/* - * Given a page frame number, convert it to a node id. - */ -#define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT)) - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ -#define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT) - -#endif /* NODE_MEM_SIZE_BITS */ - -#endif /* !CONFIG_DISCONTIGMEM */ - /* * Optional coherency support. Currently used only by selected * Intel XSC3-based systems. diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h deleted file mode 100644 index ae63a4fd28c8..000000000000 --- a/arch/arm/include/asm/mmzone.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/include/asm/mmzone.h - * - * 1999-12-29 Nicolas Pitre Created - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_MMZONE_H -#define __ASM_MMZONE_H - -/* - * Currently defined in arch/arm/mm/discontig.c - */ -extern pg_data_t discontig_node_data[]; - -/* - * Return a pointer to the node data for node n. - */ -#define NODE_DATA(nid) (&discontig_node_data[nid]) - -/* - * NODE_MEM_MAP gives the kaddr for the mem_map of the node. - */ -#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) - -#include <mach/memory.h> - -#endif diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 9dcb11e59026..c974be8913a7 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -184,6 +184,42 @@ extern unsigned long profile_pc(struct pt_regs *regs); #define predicate(x) ((x) & 0xf0000000) #define PREDICATE_ALWAYS 0xe0000000 +/* + * kprobe-based event tracer support + */ +#include <linux/stddef.h> +#include <linux/types.h> +#define MAX_REG_OFFSET (offsetof(struct pt_regs, ARM_ORIG_r0)) + +extern int regs_query_register_offset(const char *name); +extern const char *regs_query_register_name(unsigned int offset); +extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr); +extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, + unsigned int n); + +/** + * regs_get_register() - get register value from its offset + * @regs: pt_regs from which register value is gotten + * @offset: offset number of the register. + * + * regs_get_register returns the value of a register whose offset from @regs. + * The @offset is the offset of the register in struct pt_regs. + * If @offset is bigger than MAX_REG_OFFSET, this returns 0. + */ +static inline unsigned long regs_get_register(struct pt_regs *regs, + unsigned int offset) +{ + if (unlikely(offset > MAX_REG_OFFSET)) + return 0; + return *(unsigned long *)((unsigned long)regs + offset); +} + +/* Valid only for Kernel mode traps. */ +static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) +{ + return regs->ARM_sp; +} + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index f392fb4437af..f1e5a9bca249 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -201,8 +201,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { unsigned long start; unsigned long size; - unsigned short node; - unsigned short highmem; + unsigned int highmem; }; struct meminfo { @@ -212,9 +211,8 @@ struct meminfo { extern struct meminfo meminfo; -#define for_each_nodebank(iter,mi,no) \ - for (iter = 0; iter < (mi)->nr_banks; iter++) \ - if ((mi)->bank[iter].node == no) +#define for_each_bank(iter,mi) \ + for (iter = 0; iter < (mi)->nr_banks; iter++) #define bank_pfn_start(bank) __phys_to_pfn((bank)->start) #define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size) diff --git a/arch/arm/include/asm/stackprotector.h b/arch/arm/include/asm/stackprotector.h new file mode 100644 index 000000000000..de003327be97 --- /dev/null +++ b/arch/arm/include/asm/stackprotector.h @@ -0,0 +1,38 @@ +/* + * GCC stack protector support. + * + * Stack protector works by putting predefined pattern at the start of + * the stack frame and verifying that it hasn't been overwritten when + * returning from the function. The pattern is called stack canary + * and gcc expects it to be defined by a global variable called + * "__stack_chk_guard" on ARM. This unfortunately means that on SMP + * we cannot have a different canary value per task. + */ + +#ifndef _ASM_STACKPROTECTOR_H +#define _ASM_STACKPROTECTOR_H 1 + +#include <linux/random.h> +#include <linux/version.h> + +extern unsigned long __stack_chk_guard; + +/* + * Initialize the stackprotector canary value. + * + * NOTE: this must only be called from functions that never return, + * and it must always be inlined. + */ +static __always_inline void boot_init_stack_canary(void) +{ + unsigned long canary; + + /* Try to get a semi random initial value. */ + get_random_bytes(&canary, sizeof(canary)); + canary ^= LINUX_VERSION_CODE; + + current->stack_canary = canary; + __stack_chk_guard = current->stack_canary; +} + +#endif /* _ASM_STACKPROTECTOR_H */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 5f4f48002734..8ba1ccf82a02 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -83,7 +83,7 @@ void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), - int sig, const char *name); + int sig, int code, const char *name); #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h new file mode 100644 index 000000000000..e71d6ff8d104 --- /dev/null +++ b/arch/arm/include/asm/tls.h @@ -0,0 +1,46 @@ +#ifndef __ASMARM_TLS_H +#define __ASMARM_TLS_H + +#ifdef __ASSEMBLY__ + .macro set_tls_none, tp, tmp1, tmp2 + .endm + + .macro set_tls_v6k, tp, tmp1, tmp2 + mcr p15, 0, \tp, c13, c0, 3 @ set TLS register + .endm + + .macro set_tls_v6, tp, tmp1, tmp2 + ldr \tmp1, =elf_hwcap + ldr \tmp1, [\tmp1, #0] + mov \tmp2, #0xffff0fff + tst \tmp1, #HWCAP_TLS @ hardware TLS available? + mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register + streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0 + .endm + + .macro set_tls_software, tp, tmp1, tmp2 + mov \tmp1, #0xffff0fff + str \tp, [\tmp1, #-15] @ set TLS value at 0xffff0ff0 + .endm +#endif + +#ifdef CONFIG_TLS_REG_EMUL +#define tls_emu 1 +#define has_tls_reg 1 +#define set_tls set_tls_none +#elif __LINUX_ARM_ARCH__ >= 7 || \ + (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K)) +#define tls_emu 0 +#define has_tls_reg 1 +#define set_tls set_tls_v6k +#elif __LINUX_ARM_ARCH__ == 6 +#define tls_emu 0 +#define has_tls_reg (elf_hwcap & HWCAP_TLS) +#define set_tls set_tls_v6 +#else +#define tls_emu 0 +#define has_tls_reg 0 +#define set_tls set_tls_software +#endif + +#endif /* __ASMARM_TLS_H */ diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 422f3cc204a2..3d5fc41ae8d3 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -3,6 +3,8 @@ * * Assembler-only file containing VFP macros and register definitions. */ +#include <asm/hwcap.h> + #include "vfp.h" @ Macros to allow building with old toolkits (with no VFP support) @@ -22,12 +24,20 @@ LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 +#if __LINUX_ARM_ARCH__ <= 6 + ldr \tmp, =elf_hwcap @ may not have MVFR regs + ldr \tmp, [\tmp, #0] + tst \tmp, #HWCAP_VFPv3D16 + ldceq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space +#else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif +#endif .endm @ write all the working registers out of the VFP @@ -38,10 +48,18 @@ STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 +#if __LINUX_ARM_ARCH__ <= 6 + ldr \tmp, =elf_hwcap @ may not have MVFR regs + ldr \tmp, [\tmp, #0] + tst \tmp, #HWCAP_VFPv3D16 + stceq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space +#else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif +#endif .endm diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 26d302c28e13..980b78e31328 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -13,10 +13,12 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. -obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \ +obj-y := elf.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o return_address.o setup.o signal.o \ sys_arm.o stacktrace.o time.o traps.o +obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o + obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_OC_ETM) += etm.o @@ -39,6 +41,7 @@ obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 883511522fca..85f2a019f77b 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -40,6 +40,9 @@ int main(void) { DEFINE(TSK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); +#ifdef CONFIG_CC_STACKPROTECTOR + DEFINE(TSK_STACK_CANARY, offsetof(struct task_struct, stack_canary)); +#endif BLANK(); DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c index 0a1385442f43..925652318b8b 100644 --- a/arch/arm/kernel/compat.c +++ b/arch/arm/kernel/compat.c @@ -217,10 +217,3 @@ void __init convert_to_tag_list(struct tag *tags) struct param_struct *params = (struct param_struct *)tags; build_tag_list(params, ¶ms->u2); } - -void __init squash_mem_tags(struct tag *tag) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM) - tag->hdr.tag = ATAG_NONE; -} diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h index 27e61a68bd1c..39264ab1b9c6 100644 --- a/arch/arm/kernel/compat.h +++ b/arch/arm/kernel/compat.h @@ -9,5 +9,3 @@ */ extern void convert_to_tag_list(struct tag *tags); - -extern void squash_mem_tags(struct tag *tag); diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c new file mode 100644 index 000000000000..cd3b853a8a6d --- /dev/null +++ b/arch/arm/kernel/crash_dump.c @@ -0,0 +1,60 @@ +/* + * arch/arm/kernel/crash_dump.c + * + * Copyright (C) 2010 Nokia Corporation. + * Author: Mika Westerberg + * + * This code is taken from arch/x86/kernel/crash_dump_64.c + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * Copyright (C) IBM Corporation, 2004. All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/crash_dump.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +/* stores the physical address of elf header of crash image */ +unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; + +/** + * copy_oldmem_page() - copy one page from old kernel memory + * @pfn: page frame number to be copied + * @buf: buffer where the copied page is placed + * @csize: number of bytes to copy + * @offset: offset in bytes into the page + * @userbuf: if set, @buf is int he user address space + * + * This function copies one page from old kernel memory into buffer pointed by + * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes + * copied or negative error in case of failure. + */ +ssize_t copy_oldmem_page(unsigned long pfn, char *buf, + size_t csize, unsigned long offset, + int userbuf) +{ + void *vaddr; + + if (!csize) + return 0; + + vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); + if (!vaddr) + return -ENOMEM; + + if (userbuf) { + if (copy_to_user(buf, vaddr + offset, csize)) { + iounmap(vaddr); + return -EFAULT; + } + } else { + memcpy(buf, vaddr + offset, csize); + } + + iounmap(vaddr); + return csize; +} diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3fd7861de4d1..bb8e93a76407 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -22,6 +22,7 @@ #include <asm/thread_notify.h> #include <asm/unwind.h> #include <asm/unistd.h> +#include <asm/tls.h> #include "entry-header.S" @@ -735,11 +736,11 @@ ENTRY(__switch_to) #ifdef CONFIG_MMU ldr r6, [r2, #TI_CPU_DOMAIN] #endif -#if defined(CONFIG_HAS_TLS_REG) - mcr p15, 0, r3, c13, c0, 3 @ set TLS register -#elif !defined(CONFIG_TLS_REG_EMUL) - mov r4, #0xffff0fff - str r3, [r4, #-15] @ TLS val at 0xffff0ff0 + set_tls r3, r4, r5 +#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) + ldr r7, [r2, #TI_TASK] + ldr r8, =__stack_chk_guard + ldr r7, [r7, #TSK_STACK_CANARY] #endif #ifdef CONFIG_MMU mcr p15, 0, r6, c3, c0, 0 @ Set domain register @@ -749,6 +750,9 @@ ENTRY(__switch_to) ldr r0, =thread_notify_head mov r1, #THREAD_NOTIFY_SWITCH bl atomic_notifier_call_chain +#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) + str r7, [r8] +#endif THUMB( mov ip, r4 ) mov r0, r5 ARM( ldmia r4, {r4 - sl, fp, sp, pc} ) @ Load all regs saved previously @@ -1005,17 +1009,12 @@ kuser_cmpxchg_fixup: */ __kuser_get_tls: @ 0xffff0fe0 - -#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL) - ldr r0, [pc, #(16 - 8)] @ TLS stored at 0xffff0ff0 -#else - mrc p15, 0, r0, c13, c0, 3 @ read TLS register -#endif + ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init usr_ret lr - - .rep 5 - .word 0 @ pad up to __kuser_helper_version - .endr + mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code + .rep 4 + .word 0 @ 0xffff0ff0 software TLS value, then + .endr @ pad up to __kuser_helper_version /* * Reference declaration: diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 3b3d2c80509c..c0d5c3b3a760 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -47,12 +47,14 @@ #define irq_finish(irq) do { } while (0) #endif +unsigned int arch_nr_irqs; void (*init_arch_irq)(void) __initdata = NULL; unsigned long irq_err_count; int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *) v, cpu; + struct irq_desc *desc; struct irqaction * action; unsigned long flags; @@ -67,24 +69,25 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); } - if (i < NR_IRQS) { - raw_spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; + if (i < nr_irqs) { + desc = irq_to_desc(i); + raw_spin_lock_irqsave(&desc->lock, flags); + action = desc->action; if (!action) goto unlock; seq_printf(p, "%3d: ", i); for_each_present_cpu(cpu) seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu)); - seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-"); + seq_printf(p, " %10s", desc->chip->name ? : "-"); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) seq_printf(p, ", %s", action->name); seq_putc(p, '\n'); unlock: - raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { + raw_spin_unlock_irqrestore(&desc->lock, flags); + } else if (i == nr_irqs) { #ifdef CONFIG_FIQ show_fiq_list(p, v); #endif @@ -112,7 +115,7 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) * Some hardware gives randomly wrong interrupts. Rather * than crashing, do something sensible. */ - if (unlikely(irq >= NR_IRQS)) { + if (unlikely(irq >= nr_irqs)) { if (printk_ratelimit()) printk(KERN_WARNING "Bad IRQ%u\n", irq); ack_bad_irq(irq); @@ -132,12 +135,12 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) struct irq_desc *desc; unsigned long flags; - if (irq >= NR_IRQS) { + if (irq >= nr_irqs) { printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq); return; } - desc = irq_desc + irq; + desc = irq_to_desc(irq); raw_spin_lock_irqsave(&desc->lock, flags); desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; if (iflags & IRQF_VALID) @@ -151,14 +154,25 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) void __init init_IRQ(void) { + struct irq_desc *desc; int irq; - for (irq = 0; irq < NR_IRQS; irq++) - irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; + for (irq = 0; irq < nr_irqs; irq++) { + desc = irq_to_desc_alloc_node(irq, 0); + desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE; + } init_arch_irq(); } +#ifdef CONFIG_SPARSE_IRQ +int __init arch_probe_nr_irqs(void) +{ + nr_irqs = arch_nr_irqs ? arch_nr_irqs : NR_IRQS; + return 0; +} +#endif + #ifdef CONFIG_HOTPLUG_CPU static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu) @@ -178,10 +192,9 @@ static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu) void migrate_irqs(void) { unsigned int i, cpu = smp_processor_id(); + struct irq_desc *desc; - for (i = 0; i < NR_IRQS; i++) { - struct irq_desc *desc = irq_desc + i; - + for_each_irq_desc(i, desc) { if (desc->node == cpu) { unsigned int newcpu = cpumask_any_and(desc->affinity, cpu_online_mask); diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 598ca61e7bca..1fc74cbd1a19 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -37,12 +37,12 @@ void machine_kexec_cleanup(struct kimage *image) { } -void machine_shutdown(void) -{ -} - void machine_crash_shutdown(struct pt_regs *regs) { + local_irq_disable(); + crash_save_cpu(regs, smp_processor_id()); + + printk(KERN_INFO "Loading crashdump kernel...\n"); } void machine_kexec(struct kimage *image) @@ -74,7 +74,11 @@ void machine_kexec(struct kimage *image) (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); - cpu_proc_fin(); + local_irq_disable(); + local_fiq_disable(); setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/ + flush_cache_all(); + cpu_proc_fin(); + flush_cache_all(); cpu_reset(reboot_code_buffer_phys); } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index a4a9cc88bec7..401e38be1f78 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -28,7 +28,9 @@ #include <linux/tick.h> #include <linux/utsname.h> #include <linux/uaccess.h> +#include <linux/random.h> +#include <asm/cacheflush.h> #include <asm/leds.h> #include <asm/processor.h> #include <asm/system.h> @@ -36,6 +38,12 @@ #include <asm/stacktrace.h> #include <asm/mach/time.h> +#ifdef CONFIG_CC_STACKPROTECTOR +#include <linux/stackprotector.h> +unsigned long __stack_chk_guard __read_mostly; +EXPORT_SYMBOL(__stack_chk_guard); +#endif + static const char *processor_modes[] = { "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" , "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26", @@ -84,10 +92,9 @@ __setup("hlt", hlt_setup); void arm_machine_restart(char mode, const char *cmd) { - /* - * Clean and disable cache, and turn off interrupts - */ - cpu_proc_fin(); + /* Disable interrupts first */ + local_irq_disable(); + local_fiq_disable(); /* * Tell the mm system that we are going to reboot - @@ -96,6 +103,15 @@ void arm_machine_restart(char mode, const char *cmd) */ setup_mm_for_reboot(mode); + /* Clean and invalidate caches */ + flush_cache_all(); + + /* Turn off caching */ + cpu_proc_fin(); + + /* Push out any further dirty data, and ensure cache is empty */ + flush_cache_all(); + /* * Now call the architecture specific reboot code. */ @@ -189,19 +205,29 @@ int __init reboot_setup(char *str) __setup("reboot=", reboot_setup); -void machine_halt(void) +void machine_shutdown(void) { +#ifdef CONFIG_SMP + smp_send_stop(); +#endif } +void machine_halt(void) +{ + machine_shutdown(); + while (1); +} void machine_power_off(void) { + machine_shutdown(); if (pm_power_off) pm_power_off(); } void machine_restart(char *cmd) { + machine_shutdown(); arm_pm_restart(reboot_mode, cmd); } @@ -426,3 +452,9 @@ unsigned long get_wchan(struct task_struct *p) } while (count ++ < 16); return 0; } + +unsigned long arch_randomize_brk(struct mm_struct *mm) +{ + unsigned long range_end = mm->brk + 0x02000000; + return randomize_range(mm->brk, range_end, 0) ? : mm->brk; +} diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 3f562a7c0a99..f99d489822d5 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -52,6 +52,102 @@ #define BREAKINST_THUMB 0xde01 #endif +struct pt_regs_offset { + const char *name; + int offset; +}; + +#define REG_OFFSET_NAME(r) \ + {.name = #r, .offset = offsetof(struct pt_regs, ARM_##r)} +#define REG_OFFSET_END {.name = NULL, .offset = 0} + +static const struct pt_regs_offset regoffset_table[] = { + REG_OFFSET_NAME(r0), + REG_OFFSET_NAME(r1), + REG_OFFSET_NAME(r2), + REG_OFFSET_NAME(r3), + REG_OFFSET_NAME(r4), + REG_OFFSET_NAME(r5), + REG_OFFSET_NAME(r6), + REG_OFFSET_NAME(r7), + REG_OFFSET_NAME(r8), + REG_OFFSET_NAME(r9), + REG_OFFSET_NAME(r10), + REG_OFFSET_NAME(fp), + REG_OFFSET_NAME(ip), + REG_OFFSET_NAME(sp), + REG_OFFSET_NAME(lr), + REG_OFFSET_NAME(pc), + REG_OFFSET_NAME(cpsr), + REG_OFFSET_NAME(ORIG_r0), + REG_OFFSET_END, +}; + +/** + * regs_query_register_offset() - query register offset from its name + * @name: the name of a register + * + * regs_query_register_offset() returns the offset of a register in struct + * pt_regs from its name. If the name is invalid, this returns -EINVAL; + */ +int regs_query_register_offset(const char *name) +{ + const struct pt_regs_offset *roff; + for (roff = regoffset_table; roff->name != NULL; roff++) + if (!strcmp(roff->name, name)) + return roff->offset; + return -EINVAL; +} + +/** + * regs_query_register_name() - query register name from its offset + * @offset: the offset of a register in struct pt_regs. + * + * regs_query_register_name() returns the name of a register from its + * offset in struct pt_regs. If the @offset is invalid, this returns NULL; + */ +const char *regs_query_register_name(unsigned int offset) +{ + const struct pt_regs_offset *roff; + for (roff = regoffset_table; roff->name != NULL; roff++) + if (roff->offset == offset) + return roff->name; + return NULL; +} + +/** + * regs_within_kernel_stack() - check the address in the stack + * @regs: pt_regs which contains kernel stack pointer. + * @addr: address which is checked. + * + * regs_within_kernel_stack() checks @addr is within the kernel stack page(s). + * If @addr is within the kernel stack, it returns true. If not, returns false. + */ +bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr) +{ + return ((addr & ~(THREAD_SIZE - 1)) == + (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1))); +} + +/** + * regs_get_kernel_stack_nth() - get Nth entry of the stack + * @regs: pt_regs which contains kernel stack pointer. + * @n: stack entry number. + * + * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which + * is specified by @regs. If the @n th entry is NOT in the kernel stack, + * this returns 0. + */ +unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n) +{ + unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs); + addr += n; + if (regs_within_kernel_stack(regs, (unsigned long)addr)) + return *addr; + else + return 0; +} + /* * this routine will get a word off of the processes privileged stack. * the offset is how far from the base addr as stored in the THREAD. diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 61930eb09029..fd26f8d65151 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -10,6 +10,12 @@ relocate_new_kernel: ldr r0,kexec_indirection_page ldr r1,kexec_start_address + /* + * If there is no indirection page (we are doing crashdumps) + * skip any relocation. + */ + cmp r0, #0 + beq 2f 0: /* top, read another word for the indirection page */ ldr r3, [r0],#4 diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 122d999bdc7c..d5231ae7355a 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -19,12 +19,15 @@ #include <linux/seq_file.h> #include <linux/screen_info.h> #include <linux/init.h> +#include <linux/kexec.h> +#include <linux/crash_dump.h> #include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/interrupt.h> #include <linux/smp.h> #include <linux/fs.h> #include <linux/proc_fs.h> +#include <linux/memblock.h> #include <asm/unified.h> #include <asm/cpu.h> @@ -44,7 +47,9 @@ #include <asm/traps.h> #include <asm/unwind.h> +#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) #include "compat.h" +#endif #include "atags.h" #include "tcm.h" @@ -269,6 +274,21 @@ static void __init cacheid_init(void) extern struct proc_info_list *lookup_processor_type(unsigned int); extern struct machine_desc *lookup_machine_type(unsigned int); +static void __init feat_v6_fixup(void) +{ + int id = read_cpuid_id(); + + if ((id & 0xff0f0000) != 0x41070000) + return; + + /* + * HWCAP_TLS is available only on 1136 r1p0 and later, + * see also kuser_get_tls_init. + */ + if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0)) + elf_hwcap &= ~HWCAP_TLS; +} + static void __init setup_processor(void) { struct proc_info_list *list; @@ -311,6 +331,8 @@ static void __init setup_processor(void) elf_hwcap &= ~HWCAP_THUMB; #endif + feat_v6_fixup(); + cacheid_init(); cpu_proc_init(); } @@ -402,13 +424,12 @@ static int __init arm_add_memory(unsigned long start, unsigned long size) size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); bank->size = size & PAGE_MASK; - bank->node = PHYS_TO_NID(start); /* * Check whether this memory region has non-zero size or * invalid node number. */ - if (bank->size == 0 || bank->node >= MAX_NUMNODES) + if (bank->size == 0) return -EINVAL; meminfo.nr_banks++; @@ -663,6 +684,86 @@ static int __init customize_machine(void) } arch_initcall(customize_machine); +#ifdef CONFIG_KEXEC +static inline unsigned long long get_total_mem(void) +{ + unsigned long total; + + total = max_low_pfn - min_low_pfn; + return total << PAGE_SHIFT; +} + +/** + * reserve_crashkernel() - reserves memory are for crash kernel + * + * This function reserves memory area given in "crashkernel=" kernel command + * line parameter. The memory reserved is used by a dump capture kernel when + * primary kernel is crashing. + */ +static void __init reserve_crashkernel(void) +{ + unsigned long long crash_size, crash_base; + unsigned long long total_mem; + int ret; + + total_mem = get_total_mem(); + ret = parse_crashkernel(boot_command_line, total_mem, + &crash_size, &crash_base); + if (ret) + return; + + ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE); + if (ret < 0) { + printk(KERN_WARNING "crashkernel reservation failed - " + "memory is in use (0x%lx)\n", (unsigned long)crash_base); + return; + } + + printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " + "for crashkernel (System RAM: %ldMB)\n", + (unsigned long)(crash_size >> 20), + (unsigned long)(crash_base >> 20), + (unsigned long)(total_mem >> 20)); + + crashk_res.start = crash_base; + crashk_res.end = crash_base + crash_size - 1; + insert_resource(&iomem_resource, &crashk_res); +} +#else +static inline void reserve_crashkernel(void) {} +#endif /* CONFIG_KEXEC */ + +/* + * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by + * is_kdump_kernel() to determine if we are booting after a panic. Hence + * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE. + */ + +#ifdef CONFIG_CRASH_DUMP +/* + * elfcorehdr= specifies the location of elf core header stored by the crashed + * kernel. This option will be passed by kexec loader to the capture kernel. + */ +static int __init setup_elfcorehdr(char *arg) +{ + char *end; + + if (!arg) + return -EINVAL; + + elfcorehdr_addr = memparse(arg, &end); + return end > arg ? 0 : -EINVAL; +} +early_param("elfcorehdr", setup_elfcorehdr); +#endif /* CONFIG_CRASH_DUMP */ + +static void __init squash_mem_tags(struct tag *tag) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM) + tag->hdr.tag = ATAG_NONE; +} + void __init setup_arch(char **cmdline_p) { struct tag *tags = (struct tag *)&init_tags; @@ -683,12 +784,14 @@ void __init setup_arch(char **cmdline_p) else if (mdesc->boot_params) tags = phys_to_virt(mdesc->boot_params); +#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) /* * If we have the old style parameters, convert them to * a tag list. */ if (tags->hdr.tag != ATAG_CORE) convert_to_tag_list(tags); +#endif if (tags->hdr.tag != ATAG_CORE) tags = (struct tag *)&init_tags; @@ -716,12 +819,15 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + arm_memblock_init(&meminfo, mdesc); + paging_init(mdesc); request_standard_resources(&meminfo, mdesc); #ifdef CONFIG_SMP smp_init_cpus(); #endif + reserve_crashkernel(); cpu_init(); tcm_init(); @@ -729,6 +835,7 @@ void __init setup_arch(char **cmdline_p) /* * Set up various architecture-specific pointers */ + arch_nr_irqs = mdesc->nr_irqs; init_arch_irq = mdesc->init_irq; system_timer = mdesc->timer; init_machine = mdesc->init_machine; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index b8c3d0f689d9..40dc74f2b27f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -429,7 +429,11 @@ static void smp_timer_broadcast(const struct cpumask *mask) { send_ipi_message(mask, IPI_TIMER); } +#else +#define smp_timer_broadcast NULL +#endif +#ifndef CONFIG_LOCAL_TIMERS static void broadcast_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { @@ -444,7 +448,6 @@ static void local_timer_setup(struct clock_event_device *evt) evt->rating = 400; evt->mult = 1; evt->set_mode = broadcast_timer_set_mode; - evt->broadcast = smp_timer_broadcast; clockevents_register_device(evt); } @@ -456,6 +459,7 @@ void __cpuinit percpu_timer_setup(void) struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); evt->cpumask = cpumask_of(cpu); + evt->broadcast = smp_timer_broadcast; local_timer_setup(evt); } @@ -467,10 +471,13 @@ static DEFINE_SPINLOCK(stop_lock); */ static void ipi_cpu_stop(unsigned int cpu) { - spin_lock(&stop_lock); - printk(KERN_CRIT "CPU%u: stopping\n", cpu); - dump_stack(); - spin_unlock(&stop_lock); + if (system_state == SYSTEM_BOOTING || + system_state == SYSTEM_RUNNING) { + spin_lock(&stop_lock); + printk(KERN_CRIT "CPU%u: stopping\n", cpu); + dump_stack(); + spin_unlock(&stop_lock); + } set_cpu_online(cpu, false); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 7c5f0c024db7..35882fbf37f9 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -132,7 +132,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) twd_calibrate_rate(); clk->name = "local_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_C3STOP; clk->rating = 350; clk->set_mode = twd_set_mode; clk->set_next_event = twd_set_next_event; diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index e50303868f1b..26685c2f7a49 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -13,38 +13,35 @@ #include <linux/ioport.h> #include <linux/genalloc.h> #include <linux/string.h> /* memcpy */ -#include <asm/page.h> /* PAGE_SHIFT */ #include <asm/cputype.h> #include <asm/mach/map.h> #include <mach/memory.h> #include "tcm.h" -/* Scream and warn about misuse */ -#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \ - !defined(DTCM_OFFSET) || !defined(DTCM_END) -#error "TCM support selected but offsets not defined!" -#endif - static struct gen_pool *tcm_pool; /* TCM section definitions from the linker */ extern char __itcm_start, __sitcm_text, __eitcm_text; extern char __dtcm_start, __sdtcm_data, __edtcm_data; +/* These will be increased as we run */ +u32 dtcm_end = DTCM_OFFSET; +u32 itcm_end = ITCM_OFFSET; + /* * TCM memory resources */ static struct resource dtcm_res = { .name = "DTCM RAM", .start = DTCM_OFFSET, - .end = DTCM_END, + .end = DTCM_OFFSET, .flags = IORESOURCE_MEM }; static struct resource itcm_res = { .name = "ITCM RAM", .start = ITCM_OFFSET, - .end = ITCM_END, + .end = ITCM_OFFSET, .flags = IORESOURCE_MEM }; @@ -52,8 +49,8 @@ static struct map_desc dtcm_iomap[] __initdata = { { .virtual = DTCM_OFFSET, .pfn = __phys_to_pfn(DTCM_OFFSET), - .length = (DTCM_END - DTCM_OFFSET + 1), - .type = MT_UNCACHED + .length = 0, + .type = MT_MEMORY_DTCM } }; @@ -61,8 +58,8 @@ static struct map_desc itcm_iomap[] __initdata = { { .virtual = ITCM_OFFSET, .pfn = __phys_to_pfn(ITCM_OFFSET), - .length = (ITCM_END - ITCM_OFFSET + 1), - .type = MT_UNCACHED + .length = 0, + .type = MT_MEMORY_ITCM } }; @@ -93,14 +90,24 @@ void tcm_free(void *addr, size_t len) } EXPORT_SYMBOL(tcm_free); - -static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) +static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, + u32 *offset) { const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128, 256, 512, 1024, -1, -1, -1, -1 }; u32 tcm_region; int tcm_size; + /* + * If there are more than one TCM bank of this type, + * select the TCM bank to operate on in the TCM selection + * register. + */ + if (banks > 1) + asm("mcr p15, 0, %0, c9, c2, 0" + : /* No output operands */ + : "r" (bank)); + /* Read the special TCM region register c9, 0 */ if (!type) asm("mrc p15, 0, %0, c9, c1, 0" @@ -111,26 +118,24 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f]; if (tcm_size < 0) { - pr_err("CPU: %sTCM of unknown size!\n", - type ? "I" : "D"); + pr_err("CPU: %sTCM%d of unknown size\n", + type ? "I" : "D", bank); + return -EINVAL; + } else if (tcm_size > 32) { + pr_err("CPU: %sTCM%d larger than 32k found\n", + type ? "I" : "D", bank); + return -EINVAL; } else { - pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n", + pr_info("CPU: found %sTCM%d %dk @ %08x, %senabled\n", type ? "I" : "D", + bank, tcm_size, (tcm_region & 0xfffff000U), (tcm_region & 1) ? "" : "not "); } - if (tcm_size != expected_size) { - pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n", - type ? "I" : "D", - tcm_size, - expected_size); - /* Adjust to the expected size? what can we do... */ - } - /* Force move the TCM bank to where we want it, enable */ - tcm_region = offset | (tcm_region & 0x00000ffeU) | 1; + tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1; if (!type) asm("mcr p15, 0, %0, c9, c1, 0" @@ -141,10 +146,15 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) : /* No output operands */ : "r" (tcm_region)); - pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n", - type ? "I" : "D", - tcm_size, - (tcm_region & 0xfffff000U)); + /* Increase offset */ + *offset += (tcm_size << 10); + + pr_info("CPU: moved %sTCM%d %dk to %08x, enabled\n", + type ? "I" : "D", + bank, + tcm_size, + (tcm_region & 0xfffff000U)); + return 0; } /* @@ -153,34 +163,52 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size) void __init tcm_init(void) { u32 tcm_status = read_cpuid_tcmstatus(); + u8 dtcm_banks = (tcm_status >> 16) & 0x03; + u8 itcm_banks = (tcm_status & 0x03); char *start; char *end; char *ram; + int ret; + int i; /* Setup DTCM if present */ - if (tcm_status & (1 << 16)) { - setup_tcm_bank(0, DTCM_OFFSET, - (DTCM_END - DTCM_OFFSET + 1) >> 10); + if (dtcm_banks > 0) { + for (i = 0; i < dtcm_banks; i++) { + ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end); + if (ret) + return; + } + dtcm_res.end = dtcm_end - 1; request_resource(&iomem_resource, &dtcm_res); + dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET; iotable_init(dtcm_iomap, 1); /* Copy data from RAM to DTCM */ start = &__sdtcm_data; end = &__edtcm_data; ram = &__dtcm_start; + /* This means you compiled more code than fits into DTCM */ + BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET)); memcpy(start, ram, (end-start)); pr_debug("CPU DTCM: copied data from %p - %p\n", start, end); } /* Setup ITCM if present */ - if (tcm_status & 1) { - setup_tcm_bank(1, ITCM_OFFSET, - (ITCM_END - ITCM_OFFSET + 1) >> 10); + if (itcm_banks > 0) { + for (i = 0; i < itcm_banks; i++) { + ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end); + if (ret) + return; + } + itcm_res.end = itcm_end - 1; request_resource(&iomem_resource, &itcm_res); + itcm_iomap[0].length = itcm_end - ITCM_OFFSET; iotable_init(itcm_iomap, 1); /* Copy code from RAM to ITCM */ start = &__sitcm_text; end = &__eitcm_text; ram = &__itcm_start; + /* This means you compiled more code than fits into ITCM */ + BUG_ON((end - start) > (itcm_end - ITCM_OFFSET)); memcpy(start, ram, (end-start)); pr_debug("CPU ITCM: copied code from %p - %p\n", start, end); } @@ -208,10 +236,10 @@ static int __init setup_tcm_pool(void) pr_debug("Setting up TCM memory pool\n"); /* Add the rest of DTCM to the TCM pool */ - if (tcm_status & (1 << 16)) { - if (dtcm_pool_start < DTCM_END) { + if (tcm_status & (0x03 << 16)) { + if (dtcm_pool_start < dtcm_end) { ret = gen_pool_add(tcm_pool, dtcm_pool_start, - DTCM_END - dtcm_pool_start + 1, -1); + dtcm_end - dtcm_pool_start, -1); if (ret) { pr_err("CPU DTCM: could not add DTCM " \ "remainder to pool!\n"); @@ -219,16 +247,16 @@ static int __init setup_tcm_pool(void) } pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \ "the TCM memory pool\n", - DTCM_END - dtcm_pool_start + 1, + dtcm_end - dtcm_pool_start, dtcm_pool_start); } } /* Add the rest of ITCM to the TCM pool */ - if (tcm_status & 1) { - if (itcm_pool_start < ITCM_END) { + if (tcm_status & 0x03) { + if (itcm_pool_start < itcm_end) { ret = gen_pool_add(tcm_pool, itcm_pool_start, - ITCM_END - itcm_pool_start + 1, -1); + itcm_end - itcm_pool_start, -1); if (ret) { pr_err("CPU ITCM: could not add ITCM " \ "remainder to pool!\n"); @@ -236,7 +264,7 @@ static int __init setup_tcm_pool(void) } pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \ "the TCM memory pool\n", - ITCM_END - itcm_pool_start + 1, + itcm_end - itcm_pool_start, itcm_pool_start); } } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 1621e5327b2a..cda78d59aa31 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -30,6 +30,7 @@ #include <asm/unistd.h> #include <asm/traps.h> #include <asm/unwind.h> +#include <asm/tls.h> #include "ptrace.h" #include "signal.h" @@ -518,17 +519,20 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) case NR(set_tls): thread->tp_value = regs->ARM_r0; -#if defined(CONFIG_HAS_TLS_REG) - asm ("mcr p15, 0, %0, c13, c0, 3" : : "r" (regs->ARM_r0) ); -#elif !defined(CONFIG_TLS_REG_EMUL) - /* - * User space must never try to access this directly. - * Expect your app to break eventually if you do so. - * The user helper at 0xffff0fe0 must be used instead. - * (see entry-armv.S for details) - */ - *((unsigned int *)0xffff0ff0) = regs->ARM_r0; -#endif + if (tls_emu) + return 0; + if (has_tls_reg) { + asm ("mcr p15, 0, %0, c13, c0, 3" + : : "r" (regs->ARM_r0)); + } else { + /* + * User space must never try to access this directly. + * Expect your app to break eventually if you do so. + * The user helper at 0xffff0fe0 must be used instead. + * (see entry-armv.S for details) + */ + *((unsigned int *)0xffff0ff0) = regs->ARM_r0; + } return 0; #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG @@ -743,6 +747,16 @@ void __init trap_init(void) return; } +static void __init kuser_get_tls_init(unsigned long vectors) +{ + /* + * vectors + 0xfe0 = __kuser_get_tls + * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8 + */ + if (tls_emu || has_tls_reg) + memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4); +} + void __init early_trap_init(void) { unsigned long vectors = CONFIG_VECTORS_BASE; @@ -761,6 +775,11 @@ void __init early_trap_init(void) memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); /* + * Do processor specific fixups for the kuser helpers + */ + kuser_get_tls_init(vectors); + + /* * Copy signal return handlers into the vector page, and * set sigreturn to be a pointer to these. */ diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 030ba7219f48..59ff42ddf0ae 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -41,7 +41,6 @@ else endif lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o -lib-$(CONFIG_ARCH_L7200) += io-acorn.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h index c00822543d9f..4f93c567a35a 100644 --- a/arch/arm/mach-aaec2000/include/mach/memory.h +++ b/arch/arm/mach-aaec2000/include/mach/memory.h @@ -14,14 +14,4 @@ #define PHYS_OFFSET UL(0xf0000000) -/* - * The nodes are the followings: - * - * node 0: 0xf000.0000 - 0xf3ff.ffff - * node 1: 0xf400.0000 - 0xf7ff.ffff - * node 2: 0xf800.0000 - 0xfbff.ffff - * node 3: 0xfc00.0000 - 0xffff.ffff - */ -#define NODE_MEM_SIZE_BITS 26 - #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 841eaf8f27e2..939bccd70569 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -366,6 +366,17 @@ config MACH_STAMP9G20 endif +if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) +comment "AT91SAM9260/AT91SAM9G20 boards" + +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + # ---------------------------------------------------------- if ARCH_AT91SAM9G45 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index c1f821e58222..ca2ac003f41f 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -66,6 +66,9 @@ obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o +# AT91SAM9260/AT91SAM9G20 board-specific support +obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o + # AT91SAM9G45 board-specific support obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 85166b7e69a1..753c0d31a3d3 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -20,6 +20,7 @@ #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include <mach/cpu.h> #include "generic.h" #include "clock.h" @@ -176,6 +177,13 @@ static struct clk mmc1_clk = { .type = CLK_TYPE_PERIPHERAL, }; +/* Video decoder clock - Only for sam9m10/sam9m11 */ +static struct clk vdec_clk = { + .name = "vdec_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_VDEC, + .type = CLK_TYPE_PERIPHERAL, +}; + /* One additional fake clock for ohci */ static struct clk ohci_clk = { .name = "ohci_clk", @@ -239,6 +247,9 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) + clk_register(&vdec_clk); + clk_register(&pck0); clk_register(&pck1); } diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c index a4102d72cc9b..c49f5c003ee1 100644 --- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c +++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c @@ -26,6 +26,9 @@ #include <linux/spi/spi.h> #include <linux/spi/at73c213.h> #include <linux/clk.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/consumer.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -235,6 +238,46 @@ static struct gpio_led ek_leds[] = { } }; +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("AVDD", "0-001b"), + REGULATOR_SUPPLY("HPVDD", "0-001b"), + REGULATOR_SUPPLY("DBVDD", "0-001b"), + REGULATOR_SUPPLY("DCVDD", "0-001b"), +}; + +static struct regulator_init_data ek_avdd_reg_init_data = { + .constraints = { + .name = "3V3", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = ek_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), +}; + +static struct fixed_voltage_config ek_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 0, + .init_data = &ek_avdd_reg_init_data, +}; +static struct platform_device ek_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_vdd_pdata, + }, +}; +static void __init ek_add_regulators(void) +{ + platform_device_register(&ek_voltage_regulator); +} +#else +static void __init ek_add_regulators(void) {} +#endif + static struct i2c_board_info __initdata ek_i2c_devices[] = { { I2C_BOARD_INFO("24c512", 0x50), @@ -256,6 +299,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* Ethernet */ at91_add_device_eth(&ek_macb_data); + /* Regulators */ + ek_add_regulators(); /* MMC */ #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &ek_mmc_data); diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index c11fd47aec5d..6ea9808b8868 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -27,6 +27,9 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/clk.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/consumer.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -269,6 +272,46 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("AVDD", "0-001b"), + REGULATOR_SUPPLY("HPVDD", "0-001b"), + REGULATOR_SUPPLY("DBVDD", "0-001b"), + REGULATOR_SUPPLY("DCVDD", "0-001b"), +}; + +static struct regulator_init_data ek_avdd_reg_init_data = { + .constraints = { + .name = "3V3", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = ek_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), +}; + +static struct fixed_voltage_config ek_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 0, + .init_data = &ek_avdd_reg_init_data, +}; +static struct platform_device ek_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_vdd_pdata, + }, +}; +static void __init ek_add_regulators(void) +{ + platform_device_register(&ek_voltage_regulator); +} +#else +static void __init ek_add_regulators(void) {} +#endif + static struct i2c_board_info __initdata ek_i2c_devices[] = { { @@ -294,6 +337,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* Ethernet */ at91_add_device_eth(&ek_macb_data); + /* Regulators */ + ek_add_regulators(); /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c new file mode 100644 index 000000000000..2c08ae4ad3a1 --- /dev/null +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -0,0 +1,189 @@ +/* + * linux/arch/arm/mach-at91/board-snapper9260.c + * + * Copyright (C) 2010 Bluewater System Ltd + * + * Author: Andre Renaud <andre@bluewatersys.com> + * Author: Ryan Mallon <ryan@bluewatersys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/i2c/pca953x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/at91sam9_smc.h> + +#include "sam9_smc.h" +#include "generic.h" + +#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) + +static void __init snapper9260_map_io(void) +{ + at91sam9260_initialize(18432000); + + /* Debug on ttyS0 */ + at91_register_uart(0, 0, 0); + at91_set_serial_console(0); + + at91_register_uart(AT91SAM9260_ID_US0, 1, + ATMEL_UART_CTS | ATMEL_UART_RTS); + at91_register_uart(AT91SAM9260_ID_US1, 2, + ATMEL_UART_CTS | ATMEL_UART_RTS); + at91_register_uart(AT91SAM9260_ID_US2, 3, 0); +} + +static void __init snapper9260_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +static struct at91_usbh_data __initdata snapper9260_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata snapper9260_udc_data = { + .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5), + .vbus_active_low = 1, + .vbus_polled = 1, +}; + +static struct at91_eth_data snapper9260_macb_data = { + .is_rmii = 1, +}; + +static struct mtd_partition __initdata snapper9260_nand_partitions[] = { + { + .name = "Preboot", + .offset = 0, + .size = SZ_128K, + }, + { + .name = "Bootloader", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K, + }, + { + .name = "Environment", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, + { + .name = "Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init +snapper9260_nand_partition_info(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions); + return snapper9260_nand_partitions; +} + +static struct atmel_nand_data __initdata snapper9260_nand_data = { + .ale = 21, + .cle = 22, + .rdy_pin = AT91_PIN_PC13, + .partition_info = snapper9260_nand_partition_info, + .bus_width_16 = 0, +}; + +static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 0, + .ncs_write_setup = 0, + .nwe_setup = 0, + + .ncs_read_pulse = 5, + .nrd_pulse = 2, + .ncs_write_pulse = 5, + .nwe_pulse = 2, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE), + .tdf_cycles = 1, +}; + +static struct pca953x_platform_data snapper9260_io_expander_data = { + .gpio_base = SNAPPER9260_IO_EXP_GPIO(0), +}; + +static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { + { + /* IO expander */ + I2C_BOARD_INFO("max7312", 0x28), + .platform_data = &snapper9260_io_expander_data, + }, + { + /* Audio codec */ + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, + { + /* RTC */ + I2C_BOARD_INFO("isl1208", 0x6f), + }, +}; + +static void __init snapper9260_add_device_nand(void) +{ + at91_set_A_periph(AT91_PIN_PC14, 0); + sam9_smc_configure(3, &snapper9260_nand_smc_config); + at91_add_device_nand(&snapper9260_nand_data); +} + +static void __init snapper9260_board_init(void) +{ + at91_add_device_i2c(snapper9260_i2c_devices, + ARRAY_SIZE(snapper9260_i2c_devices)); + at91_add_device_serial(); + at91_add_device_usbh(&snapper9260_usbh_data); + at91_add_device_udc(&snapper9260_udc_data); + at91_add_device_eth(&snapper9260_macb_data); + at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK | + ATMEL_SSC_TD | ATMEL_SSC_RD)); + snapper9260_add_device_nand(); +} + +MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = snapper9260_map_io, + .init_irq = snapper9260_init_irq, + .init_machine = snapper9260_board_init, +MACHINE_END + + diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index d8c1ededaa75..9c6af9737485 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -84,7 +84,7 @@ */ #define AT91_ECC (0xffffe200 - AT91_BASE_SYS) #define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) +#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_SMC (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h index 1499b1cbffdd..976f4a6c3353 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h @@ -15,7 +15,7 @@ #ifndef AT91CAP9_DDRSDR_H #define AT91CAP9_DDRSDR_H -#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ +#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ #define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ #define AT91_DDRSDRC_MODE_NORMAL 0 #define AT91_DDRSDRC_MODE_NOP 1 @@ -25,10 +25,10 @@ #define AT91_DDRSDRC_MODE_EXT_LMR 5 #define AT91_DDRSDRC_MODE_DEEP 6 -#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ +#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ #define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ +#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ #define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ #define AT91_DDRSDRC_NC_SDR8 (0 << 0) #define AT91_DDRSDRC_NC_SDR9 (1 << 0) @@ -49,7 +49,7 @@ #define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ #define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ +#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ #define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ #define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ #define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ @@ -59,13 +59,13 @@ #define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ -#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ +#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ #define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ #define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ #define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ #define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ -#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ +#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -80,14 +80,14 @@ #define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) #define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ +#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 #define AT91_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ +#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ @@ -98,5 +98,11 @@ #define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ #define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_DDRSDRC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_DDRSDRC##num + reg, value) + #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 43c396b9b4cb..4e79036d3b80 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -84,7 +84,7 @@ * System Peripherals (offset from AT91_BASE_SYS) */ #define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 87de8be17484..2b5618518129 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -68,7 +68,7 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_AIC (0xfffff000 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h new file mode 100644 index 000000000000..d27b15ba8ebf --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -0,0 +1,130 @@ +/* + * Header file for the Atmel DDR/SDR SDRAM Controller + * + * Copyright (C) 2010 Atmel Corporation + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT91SAM9_DDRSDR_H +#define AT91SAM9_DDRSDR_H + +#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ +#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */ +#define AT91_DDRSDRC_MODE_NORMAL 0 +#define AT91_DDRSDRC_MODE_NOP 1 +#define AT91_DDRSDRC_MODE_PRECHARGE 2 +#define AT91_DDRSDRC_MODE_LMR 3 +#define AT91_DDRSDRC_MODE_REFRESH 4 +#define AT91_DDRSDRC_MODE_EXT_LMR 5 +#define AT91_DDRSDRC_MODE_DEEP 6 + +#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ +#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ +#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_DDRSDRC_NC_SDR8 (0 << 0) +#define AT91_DDRSDRC_NC_SDR9 (1 << 0) +#define AT91_DDRSDRC_NC_SDR10 (2 << 0) +#define AT91_DDRSDRC_NC_SDR11 (3 << 0) +#define AT91_DDRSDRC_NC_DDR9 (0 << 0) +#define AT91_DDRSDRC_NC_DDR10 (1 << 0) +#define AT91_DDRSDRC_NC_DDR11 (2 << 0) +#define AT91_DDRSDRC_NC_DDR12 (3 << 0) +#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_DDRSDRC_NR_11 (0 << 2) +#define AT91_DDRSDRC_NR_12 (1 << 2) +#define AT91_DDRSDRC_NR_13 (2 << 2) +#define AT91_DDRSDRC_NR_14 (3 << 2) +#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ +#define AT91_DDRSDRC_CAS_2 (2 << 4) +#define AT91_DDRSDRC_CAS_3 (3 << 4) +#define AT91_DDRSDRC_CAS_25 (6 << 4) +#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ +#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ +#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */ +#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */ +#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */ +#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */ + +#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ +#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ +#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ +#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ +#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ +#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ +#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ +#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */ +#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ + +#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ +#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ +#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ +#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ +#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ + +#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */ +#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ +#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ +#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ +#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ + +#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ +#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_DDRSDRC_LPCB_DISABLE 0 +#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 +#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 +#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ +#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ +#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) +#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */ +#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ + +#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ +#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD_SDR 0 +#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 +#define AT91_DDRSDRC_MD_DDR2 6 +#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ +#define AT91_DDRSDRC_DBW_32BITS (0 << 4) +#define AT91_DDRSDRC_DBW_16BITS (1 << 4) + +#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ +#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ +#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ +#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ + +#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */ +#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ + +#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ + +#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */ +#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ +#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ +#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ + +#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */ +#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ +#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ + +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_DDRSDRC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_DDRSDRC##num + reg, value) + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h index b7260389f7ca..100f5a592926 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h @@ -17,7 +17,7 @@ #define AT91SAM9_SDRAMC_H /* SDRAM Controller (SDRAMC) registers */ -#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */ #define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ #define AT91_SDRAMC_MODE_NORMAL 0 #define AT91_SDRAMC_MODE_NOP 1 @@ -27,10 +27,10 @@ #define AT91_SDRAMC_MODE_EXT_LMR 5 #define AT91_SDRAMC_MODE_DEEP 6 -#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */ #define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */ #define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ #define AT91_SDRAMC_NC_8 (0 << 0) #define AT91_SDRAMC_NC_9 (1 << 0) @@ -57,7 +57,7 @@ #define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ #define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ -#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */ #define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_SDRAMC_LPCB_DISABLE 0 #define AT91_SDRAMC_LPCB_SELF_REFRESH 1 @@ -71,16 +71,21 @@ #define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) #define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */ #define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ -#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */ #define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ #define AT91_SDRAMC_MD_SDRAM 0 #define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_SDRAMC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_SDRAMC##num + reg, value) #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index fc2de6c09c86..87ba8517ad98 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -74,7 +74,7 @@ */ #define AT91_DMA (0xffffe600 - AT91_BASE_SYS) #define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index df2ed848c9f8..58528aa9c8a8 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -44,6 +44,8 @@ /* USB Device */ struct at91_udc_data { u8 vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ u8 pullup_pin; /* active == D+ pulled up */ u8 pullup_active_low; /* true == pullup_pin is active low */ }; diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 833659d1200a..3bef931d0b1c 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -52,6 +52,7 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 +#define ARCH_EXID_AT91SAM9G46 0x00000003 #define ARCH_EXID_AT91SAM9G45 0x00000004 static inline unsigned long at91_exid_identify(void) @@ -128,9 +129,18 @@ static inline unsigned long at91cap9_rev_identify(void) #ifdef CONFIG_ARCH_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) #define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) +#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9M10)) +#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G46)) +#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9M11)) #else #define cpu_is_at91sam9g45() (0) #define cpu_is_at91sam9g45es() (0) +#define cpu_is_at91sam9m10() (0) +#define cpu_is_at91sam9g46() (0) +#define cpu_is_at91sam9m11() (0) #endif #ifdef CONFIG_ARCH_AT91CAP9 diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 04c91e31c9c5..bfdd8ab26dc8 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -19,6 +19,7 @@ #define PIN_BASE NR_AIC_IRQS #define MAX_GPIO_BANKS 5 +#define NR_BUILTIN_GPIO (PIN_BASE + (MAX_GPIO_BANKS * 32)) /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 08322c44df1a..8c87d0c1b8f8 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -30,14 +30,50 @@ static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); + saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR); lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) + +#elif defined(CONFIG_ARCH_AT91SAM9G45) +#include <mach/at91sam9_ddrsdr.h> + +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. + */ +static u32 saved_lpr1; + +static inline u32 sdram_selfrefresh_enable(void) +{ + /* Those tow values allow us to delay self-refresh activation + * to the maximum. */ + u32 lpr0, lpr1; + u32 saved_lpr0; + + saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); + lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; + lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + + saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); + lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; + lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); + at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); + + return saved_lpr0; +} + +#define sdram_selfrefresh_disable(saved_lpr0) \ + do { \ + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \ + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \ + } while (0) #else #include <mach/at91sam9_sdramc.h> @@ -47,7 +83,6 @@ static inline u32 sdram_selfrefresh_enable(void) * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; * handle those cases both here and in the Suspend-To-RAM support. */ -#define AT91_SDRAMC AT91_SDRAMC0 #warning Assuming EB1 SDRAM controller is *NOT* used #endif @@ -55,13 +90,13 @@ static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR); lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr) #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 9c5b48e68a71..b6b00a1f6125 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -16,10 +16,12 @@ #include <mach/hardware.h> #include <mach/at91_pmc.h> -#ifdef CONFIG_ARCH_AT91RM9200 +#if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200_mc.h> #elif defined(CONFIG_ARCH_AT91CAP9) #include <mach/at91cap9_ddrsdr.h> +#elif defined(CONFIG_ARCH_AT91SAM9G45) +#include <mach/at91sam9_ddrsdr.h> #else #include <mach/at91sam9_sdramc.h> #endif @@ -30,7 +32,6 @@ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; * handle those cases both here and in the Suspend-To-RAM support. */ -#define AT91_SDRAMC AT91_SDRAMC0 #warning Assuming EB1 SDRAM controller is *NOT* used #endif @@ -113,12 +114,14 @@ ENTRY(at91_slow_clock) /* * Register usage: * R1 = Base address of AT91_PMC - * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200) + * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) * R3 = temporary register * R4 = temporary register + * R5 = Base address of second RAM Controller or 0 if not present */ ldr r1, .at91_va_base_pmc ldr r2, .at91_va_base_sdramc + ldr r5, .at91_va_base_ramc1 /* Drain write buffer */ mcr p15, 0, r0, c7, c10, 4 @@ -127,20 +130,33 @@ ENTRY(at91_slow_clock) /* Put SDRAM in self-refresh mode */ mov r3, #1 str r3, [r2, #AT91_SDRAMC_SRR] -#elif defined(CONFIG_ARCH_AT91CAP9) - /* Enable SDRAM self-refresh mode */ - ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] - str r3, .saved_sam9_lpr +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) - mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] + /* prepare for DDRAM self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr + bic r3, #AT91_DDRSDRC_LPCB + orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + + /* figure out if we use the second ram controller */ + cmp r5, #0 + ldrne r4, [r5, #AT91_DDRSDRC_LPR] + strne r4, .saved_sam9_lpr1 + bicne r4, #AT91_DDRSDRC_LPCB + orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH + + /* Enable DDRAM self-refresh mode */ + str r3, [r2, #AT91_DDRSDRC_LPR] + strne r4, [r5, #AT91_DDRSDRC_LPR] #else /* Enable SDRAM self-refresh mode */ - ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + ldr r3, [r2, #AT91_SDRAMC_LPR] str r3, .saved_sam9_lpr - mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + bic r3, #AT91_SDRAMC_LPCB + orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_SDRAMC_LPR] #endif /* Save Master clock setting */ @@ -247,14 +263,21 @@ ENTRY(at91_slow_clock) #ifdef CONFIG_ARCH_AT91RM9200 /* Do nothing - self-refresh is automatically disabled. */ -#elif defined(CONFIG_ARCH_AT91CAP9) - /* Restore LPR on AT91CAP9 */ +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) + /* Restore LPR on AT91 with DDRAM */ ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* if we use the second ram controller */ + cmp r5, #0 + ldrne r4, .saved_sam9_lpr1 + strne r4, [r5, #AT91_DDRSDRC_LPR] + #else - /* Restore LPR on AT91SAM9 */ + /* Restore LPR on AT91 with SDRAM */ ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + str r3, [r2, #AT91_SDRAMC_LPR] #endif /* Restore registers, and return */ @@ -273,18 +296,29 @@ ENTRY(at91_slow_clock) .saved_sam9_lpr: .word 0 +.saved_sam9_lpr1: + .word 0 + .at91_va_base_pmc: .word AT91_VA_BASE_SYS + AT91_PMC #ifdef CONFIG_ARCH_AT91RM9200 .at91_va_base_sdramc: .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91CAP9) +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) .at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC + .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 #else .at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC + .word AT91_VA_BASE_SYS + AT91_SDRAMC0 +#endif + +.at91_va_base_ramc1: +#if defined(CONFIG_ARCH_AT91SAM9G45) + .word AT91_VA_BASE_SYS + AT91_DDRSDRC1 +#else + .word 0 #endif ENTRY(at91_slow_clock_sz) diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 72e405df0fb0..d3f959e92b2d 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -91,14 +91,23 @@ static struct clk uart_clk = { .parent = &pll1_clk, }; +static struct clk dummy_apb_pclk = { + .name = "BUSCLK", + .type = CLK_TYPE_PRIMARY, + .mode = CLK_MODE_XTAL, +}; + static struct clk_lookup lookups[] = { - { /* UART0 */ - .dev_id = "uarta", - .clk = &uart_clk, - }, { /* UART1 */ - .dev_id = "uartb", - .clk = &uart_clk, - } + { /* Bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ + .dev_id = "uarta", + .clk = &uart_clk, + }, { /* UART1 */ + .dev_id = "uartb", + .clk = &uart_clk, + } }; static struct amba_device *amba_devs[] __initdata = { diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index dbaae5f746a1..eb34bd1251d4 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -30,7 +30,6 @@ config ARCH_CLEP7312 config ARCH_EDB7211 bool "EDB7211" select ISA - select ARCH_DISCONTIGMEM_ENABLE select ARCH_SPARSEMEM_ENABLE select ARCH_SELECT_MEMORY_MODEL help diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 09fb57e45213..3c3bf45039ff 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -32,7 +32,6 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags, mi->nr_banks=1; mi->bank[0].start = 0xc0000000; mi->bank[0].size = 0x01000000; - mi->bank[0].node = 0; } diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index dc81cc68595d..4a7a2322979a 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -18,6 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> +#include <linux/memblock.h> #include <linux/types.h> #include <linux/string.h> @@ -29,6 +30,12 @@ extern void edb7211_map_io(void); +/* Reserve screen memory region at the start of main system memory. */ +static void __init edb7211_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, 0x00020000); +} + static void __init fixup_edb7211(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) @@ -43,10 +50,8 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags, */ mi->bank[0].start = 0xc0000000; mi->bank[0].size = 8*1024*1024; - mi->bank[0].node = 0; mi->bank[1].start = 0xc1000000; mi->bank[1].size = 8*1024*1024; - mi->bank[1].node = 1; mi->nr_banks = 2; } @@ -57,6 +62,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ .fixup = fixup_edb7211, .map_io = edb7211_map_io, + .reserve = edb7211_reserve, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index 7430e4049d87..a696099aa4f8 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -39,7 +39,6 @@ struct meminfo memmap = { { .start = 0xC0000000, .size = 0x01000000, - .node = 0 }, }, }; diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index f70d52be48a2..f45c8e892cb5 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -20,7 +20,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H - /* * Physical DRAM offset. */ @@ -72,7 +71,6 @@ * node 2: 0xd0000000 - 0xd7ffffff * node 3: 0xd8000000 - 0xdfffffff */ -#define NODE_MEM_SIZE_BITS 24 #define SECTION_SIZE_BITS 24 #define MAX_PHYSMEM_BITS 32 diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile index 427507a2d696..11033f1c2e23 100644 --- a/arch/arm/mach-cns3xxx/Makefile +++ b/arch/arm/mach-cns3xxx/Makefile @@ -1,2 +1,3 @@ -obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o +obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o devices.o +obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 2e30c8288740..9df8391fd78a 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -32,6 +32,7 @@ #include <mach/cns3xxx.h> #include <mach/irqs.h> #include "core.h" +#include "devices.h" /* * NOR Flash @@ -117,6 +118,9 @@ static void __init cns3420_init(void) { platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs)); + cns3xxx_ahci_init(); + cns3xxx_sdhci_init(); + pm_power_off = cns3xxx_power_off; } diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c new file mode 100644 index 000000000000..50b4d31c27c0 --- /dev/null +++ b/arch/arm/mach-cns3xxx/devices.c @@ -0,0 +1,111 @@ +/* + * CNS3xxx common devices + * + * Copyright 2008 Cavium Networks + * Scott Shu + * Copyright 2010 MontaVista Software, LLC. + * Anton Vorontsov <avorontsov@mvista.com> + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/compiler.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <mach/cns3xxx.h> +#include <mach/irqs.h> +#include "core.h" +#include "devices.h" + +/* + * AHCI + */ +static struct resource cns3xxx_ahci_resource[] = { + [0] = { + .start = CNS3XXX_SATA2_BASE, + .end = CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CNS3XXX_SATA, + .end = IRQ_CNS3XXX_SATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device cns3xxx_ahci_pdev = { + .name = "ahci", + .id = 0, + .resource = cns3xxx_ahci_resource, + .num_resources = ARRAY_SIZE(cns3xxx_ahci_resource), + .dev = { + .dma_mask = &cns3xxx_ahci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init cns3xxx_ahci_init(void) +{ + u32 tmp; + + tmp = __raw_readl(MISC_SATA_POWER_MODE); + tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */ + tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */ + __raw_writel(tmp, MISC_SATA_POWER_MODE); + + /* Enable SATA PHY */ + cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0); + cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1); + + /* Enable SATA Clock */ + cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA); + + /* De-Asscer SATA Reset */ + cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA)); + + platform_device_register(&cns3xxx_ahci_pdev); +} + +/* + * SDHCI + */ +static struct resource cns3xxx_sdhci_resources[] = { + [0] = { + .start = CNS3XXX_SDIO_BASE, + .end = CNS3XXX_SDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CNS3XXX_SDIO, + .end = IRQ_CNS3XXX_SDIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cns3xxx_sdhci_pdev = { + .name = "sdhci-cns3xxx", + .id = 0, + .num_resources = ARRAY_SIZE(cns3xxx_sdhci_resources), + .resource = cns3xxx_sdhci_resources, +}; + +void __init cns3xxx_sdhci_init(void) +{ + u32 __iomem *gpioa = __io(CNS3XXX_MISC_BASE_VIRT + 0x0014); + u32 gpioa_pins = __raw_readl(gpioa); + + /* MMC/SD pins share with GPIOA */ + gpioa_pins |= 0x1fff0004; + __raw_writel(gpioa_pins, gpioa); + + cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); + cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO)); + + platform_device_register(&cns3xxx_sdhci_pdev); +} diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h new file mode 100644 index 000000000000..27e15a10aa85 --- /dev/null +++ b/arch/arm/mach-cns3xxx/devices.h @@ -0,0 +1,20 @@ +/* + * CNS3xxx common devices + * + * Copyright 2008 Cavium Networks + * Scott Shu + * Copyright 2010 MontaVista Software, LLC. + * Anton Vorontsov <avorontsov@mvista.com> + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __CNS3XXX_DEVICES_H_ +#define __CNS3XXX_DEVICES_H_ + +void __init cns3xxx_ahci_init(void); +void __init cns3xxx_sdhci_init(void); + +#endif /* __CNS3XXX_DEVICES_H_ */ diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h index 8a2f5a21d4ee..6dbce13771ca 100644 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -247,37 +247,36 @@ * Misc block */ #define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs)) -#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset)))) - -#define MISC_MEMORY_REMAP_REG MISC_MEM_MAP_VALUE(0x00) -#define MISC_CHIP_CONFIG_REG MISC_MEM_MAP_VALUE(0x04) -#define MISC_DEBUG_PROBE_DATA_REG MISC_MEM_MAP_VALUE(0x08) -#define MISC_DEBUG_PROBE_SELECTION_REG MISC_MEM_MAP_VALUE(0x0C) -#define MISC_IO_PIN_FUNC_SELECTION_REG MISC_MEM_MAP_VALUE(0x10) -#define MISC_GPIOA_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x14) -#define MISC_GPIOB_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x18) -#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A MISC_MEM_MAP_VALUE(0x1C) -#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B MISC_MEM_MAP_VALUE(0x20) -#define MISC_GPIOA_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x24) -#define MISC_GPIOA_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x28) -#define MISC_GPIOB_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x2C) -#define MISC_GPIOB_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x30) -#define MISC_IO_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x34) -#define MISC_E_FUSE_31_0_REG MISC_MEM_MAP_VALUE(0x40) -#define MISC_E_FUSE_63_32_REG MISC_MEM_MAP_VALUE(0x44) -#define MISC_E_FUSE_95_64_REG MISC_MEM_MAP_VALUE(0x48) -#define MISC_E_FUSE_127_96_REG MISC_MEM_MAP_VALUE(0x4C) -#define MISC_SOFTWARE_TEST_1_REG MISC_MEM_MAP_VALUE(0x50) -#define MISC_SOFTWARE_TEST_2_REG MISC_MEM_MAP_VALUE(0x54) - -#define MISC_SATA_POWER_MODE MISC_MEM_MAP_VALUE(0x310) - -#define MISC_USB_CFG_REG MISC_MEM_MAP_VALUE(0x800) -#define MISC_USB_STS_REG MISC_MEM_MAP_VALUE(0x804) -#define MISC_USBPHY00_CFG_REG MISC_MEM_MAP_VALUE(0x808) -#define MISC_USBPHY01_CFG_REG MISC_MEM_MAP_VALUE(0x80c) -#define MISC_USBPHY10_CFG_REG MISC_MEM_MAP_VALUE(0x810) -#define MISC_USBPHY11_CFG_REG MISC_MEM_MAP_VALUE(0x814) + +#define MISC_MEMORY_REMAP_REG MISC_MEM_MAP(0x00) +#define MISC_CHIP_CONFIG_REG MISC_MEM_MAP(0x04) +#define MISC_DEBUG_PROBE_DATA_REG MISC_MEM_MAP(0x08) +#define MISC_DEBUG_PROBE_SELECTION_REG MISC_MEM_MAP(0x0C) +#define MISC_IO_PIN_FUNC_SELECTION_REG MISC_MEM_MAP(0x10) +#define MISC_GPIOA_PIN_ENABLE_REG MISC_MEM_MAP(0x14) +#define MISC_GPIOB_PIN_ENABLE_REG MISC_MEM_MAP(0x18) +#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A MISC_MEM_MAP(0x1C) +#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B MISC_MEM_MAP(0x20) +#define MISC_GPIOA_15_0_PULL_CTRL_REG MISC_MEM_MAP(0x24) +#define MISC_GPIOA_16_31_PULL_CTRL_REG MISC_MEM_MAP(0x28) +#define MISC_GPIOB_15_0_PULL_CTRL_REG MISC_MEM_MAP(0x2C) +#define MISC_GPIOB_16_31_PULL_CTRL_REG MISC_MEM_MAP(0x30) +#define MISC_IO_PULL_CTRL_REG MISC_MEM_MAP(0x34) +#define MISC_E_FUSE_31_0_REG MISC_MEM_MAP(0x40) +#define MISC_E_FUSE_63_32_REG MISC_MEM_MAP(0x44) +#define MISC_E_FUSE_95_64_REG MISC_MEM_MAP(0x48) +#define MISC_E_FUSE_127_96_REG MISC_MEM_MAP(0x4C) +#define MISC_SOFTWARE_TEST_1_REG MISC_MEM_MAP(0x50) +#define MISC_SOFTWARE_TEST_2_REG MISC_MEM_MAP(0x54) + +#define MISC_SATA_POWER_MODE MISC_MEM_MAP(0x310) + +#define MISC_USB_CFG_REG MISC_MEM_MAP(0x800) +#define MISC_USB_STS_REG MISC_MEM_MAP(0x804) +#define MISC_USBPHY00_CFG_REG MISC_MEM_MAP(0x808) +#define MISC_USBPHY01_CFG_REG MISC_MEM_MAP(0x80c) +#define MISC_USBPHY10_CFG_REG MISC_MEM_MAP(0x810) +#define MISC_USBPHY11_CFG_REG MISC_MEM_MAP(0x814) #define MISC_PCIEPHY_CMCTL(x) MISC_MEM_MAP(0x900 + (x) * 0x004) #define MISC_PCIEPHY_CTL(x) MISC_MEM_MAP(0x940 + (x) * 0x100) @@ -300,21 +299,21 @@ /* * Power management and clock control */ -#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset)))) - -#define PM_CLK_GATE_REG PMU_REG_VALUE(0x000) -#define PM_SOFT_RST_REG PMU_REG_VALUE(0x004) -#define PM_HS_CFG_REG PMU_REG_VALUE(0x008) -#define PM_CACTIVE_STA_REG PMU_REG_VALUE(0x00C) -#define PM_PWR_STA_REG PMU_REG_VALUE(0x010) -#define PM_CLK_CTRL_REG PMU_REG_VALUE(0x014) -#define PM_PLL_LCD_I2S_CTRL_REG PMU_REG_VALUE(0x018) -#define PM_PLL_HM_PD_CTRL_REG PMU_REG_VALUE(0x01C) -#define PM_REGULAT_CTRL_REG PMU_REG_VALUE(0x020) -#define PM_WDT_CTRL_REG PMU_REG_VALUE(0x024) -#define PM_WU_CTRL0_REG PMU_REG_VALUE(0x028) -#define PM_WU_CTRL1_REG PMU_REG_VALUE(0x02C) -#define PM_CSR_REG PMU_REG_VALUE(0x030) +#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs)) + +#define PM_CLK_GATE_REG PMU_MEM_MAP(0x000) +#define PM_SOFT_RST_REG PMU_MEM_MAP(0x004) +#define PM_HS_CFG_REG PMU_MEM_MAP(0x008) +#define PM_CACTIVE_STA_REG PMU_MEM_MAP(0x00C) +#define PM_PWR_STA_REG PMU_MEM_MAP(0x010) +#define PM_CLK_CTRL_REG PMU_MEM_MAP(0x014) +#define PM_PLL_LCD_I2S_CTRL_REG PMU_MEM_MAP(0x018) +#define PM_PLL_HM_PD_CTRL_REG PMU_MEM_MAP(0x01C) +#define PM_REGULAT_CTRL_REG PMU_MEM_MAP(0x020) +#define PM_WDT_CTRL_REG PMU_MEM_MAP(0x024) +#define PM_WU_CTRL0_REG PMU_MEM_MAP(0x028) +#define PM_WU_CTRL1_REG PMU_MEM_MAP(0x02C) +#define PM_CSR_REG PMU_MEM_MAP(0x030) /* PM_CLK_GATE_REG */ #define PM_CLK_GATE_REG_OFFSET_SDIO (25) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c new file mode 100644 index 000000000000..38088c36936c --- /dev/null +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -0,0 +1,389 @@ +/* + * PCI-E support for CNS3xxx + * + * Copyright 2008 Cavium Networks + * Richard Liu <richard.liu@caviumnetworks.com> + * Copyright 2010 MontaVista Software, LLC. + * Anton Vorontsov <avorontsov@mvista.com> + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/bug.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <asm/mach/map.h> +#include <mach/cns3xxx.h> +#include "core.h" + +enum cns3xxx_access_type { + CNS3XXX_HOST_TYPE = 0, + CNS3XXX_CFG0_TYPE, + CNS3XXX_CFG1_TYPE, + CNS3XXX_NUM_ACCESS_TYPES, +}; + +struct cns3xxx_pcie { + struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES]; + unsigned int irqs[2]; + struct resource res_io; + struct resource res_mem; + struct hw_pci hw_pci; + + bool linked; +}; + +static struct cns3xxx_pcie cns3xxx_pcie[]; /* forward decl. */ + +static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) +{ + struct pci_sys_data *root = sysdata; + + return &cns3xxx_pcie[root->domain]; +} + +static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +{ + return sysdata_to_cnspci(dev->sysdata); +} + +static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus) +{ + return sysdata_to_cnspci(bus->sysdata); +} + +static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus, + unsigned int devfn, int where) +{ + struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus); + int busno = bus->number; + int slot = PCI_SLOT(devfn); + int offset; + enum cns3xxx_access_type type; + void __iomem *base; + + /* If there is no link, just show the CNS PCI bridge. */ + if (!cnspci->linked && (busno > 0 || slot > 0)) + return NULL; + + /* + * The CNS PCI bridge doesn't fit into the PCI hierarchy, though + * we still want to access it. For this to work, we must place + * the first device on the same bus as the CNS PCI bridge. + */ + if (busno == 0) { + if (slot > 1) + return NULL; + type = slot; + } else { + type = CNS3XXX_CFG1_TYPE; + } + + base = (void __iomem *)cnspci->cfg_bases[type].virtual; + offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc); + + return base + offset; +} + +static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 v; + void __iomem *base; + u32 mask = (0x1ull << (size * 8)) - 1; + int shift = (where % 4) * 8; + + base = cns3xxx_pci_cfg_base(bus, devfn, where); + if (!base) { + *val = 0xffffffff; + return PCIBIOS_SUCCESSFUL; + } + + v = __raw_readl(base); + + if (bus->number == 0 && devfn == 0 && + (where & 0xffc) == PCI_CLASS_REVISION) { + /* + * RC's class is 0xb, but Linux PCI driver needs 0x604 + * for a PCIe bridge. So we must fixup the class code + * to 0x604 here. + */ + v &= 0xff; + v |= 0x604 << 16; + } + + *val = (v >> shift) & mask; + + return PCIBIOS_SUCCESSFUL; +} + +static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 v; + void __iomem *base; + u32 mask = (0x1ull << (size * 8)) - 1; + int shift = (where % 4) * 8; + + base = cns3xxx_pci_cfg_base(bus, devfn, where); + if (!base) + return PCIBIOS_SUCCESSFUL; + + v = __raw_readl(base); + + v &= ~(mask << shift); + v |= (val & mask) << shift; + + __raw_writel(v, base); + + return PCIBIOS_SUCCESSFUL; +} + +static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys) +{ + struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys); + struct resource *res_io = &cnspci->res_io; + struct resource *res_mem = &cnspci->res_mem; + struct resource **sysres = sys->resource; + + BUG_ON(request_resource(&iomem_resource, res_io) || + request_resource(&iomem_resource, res_mem)); + + sysres[0] = res_io; + sysres[1] = res_mem; + + return 1; +} + +static struct pci_ops cns3xxx_pcie_ops = { + .read = cns3xxx_pci_read_config, + .write = cns3xxx_pci_write_config, +}; + +static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys); +} + +static int cns3xxx_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev); + int irq = cnspci->irqs[slot]; + + pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n", + pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn), + PCI_FUNC(dev->devfn), slot, pin, irq); + + return irq; +} + +static struct cns3xxx_pcie cns3xxx_pcie[] = { + [0] = { + .cfg_bases = { + [CNS3XXX_HOST_TYPE] = { + .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE), + .length = SZ_16M, + .type = MT_DEVICE, + }, + [CNS3XXX_CFG0_TYPE] = { + .virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE), + .length = SZ_16M, + .type = MT_DEVICE, + }, + [CNS3XXX_CFG1_TYPE] = { + .virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE), + .length = SZ_16M, + .type = MT_DEVICE, + }, + }, + .res_io = { + .name = "PCIe0 I/O space", + .start = CNS3XXX_PCIE0_IO_BASE, + .end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1, + .flags = IORESOURCE_IO, + }, + .res_mem = { + .name = "PCIe0 non-prefetchable", + .start = CNS3XXX_PCIE0_MEM_BASE, + .end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, + .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, }, + .hw_pci = { + .domain = 0, + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = cns3xxx_pci_setup, + .scan = cns3xxx_pci_scan_bus, + .map_irq = cns3xxx_pcie_map_irq, + }, + }, + [1] = { + .cfg_bases = { + [CNS3XXX_HOST_TYPE] = { + .virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE), + .length = SZ_16M, + .type = MT_DEVICE, + }, + [CNS3XXX_CFG0_TYPE] = { + .virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE), + .length = SZ_16M, + .type = MT_DEVICE, + }, + [CNS3XXX_CFG1_TYPE] = { + .virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE), + .length = SZ_16M, + .type = MT_DEVICE, + }, + }, + .res_io = { + .name = "PCIe1 I/O space", + .start = CNS3XXX_PCIE1_IO_BASE, + .end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1, + .flags = IORESOURCE_IO, + }, + .res_mem = { + .name = "PCIe1 non-prefetchable", + .start = CNS3XXX_PCIE1_MEM_BASE, + .end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, + .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, }, + .hw_pci = { + .domain = 1, + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = cns3xxx_pci_setup, + .scan = cns3xxx_pci_scan_bus, + .map_irq = cns3xxx_pcie_map_irq, + }, + }, +}; + +static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci) +{ + int port = cnspci->hw_pci.domain; + u32 reg; + unsigned long time; + + reg = __raw_readl(MISC_PCIE_CTRL(port)); + /* + * Enable Application Request to 1, it will exit L1 automatically, + * but when chip back, it will use another clock, still can use 0x1. + */ + reg |= 0x3; + __raw_writel(reg, MISC_PCIE_CTRL(port)); + + pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port); + pr_info("PCIe: Port[%d] Check data link layer...", port); + + time = jiffies; + while (1) { + reg = __raw_readl(MISC_PCIE_PM_DEBUG(port)); + if (reg & 0x1) { + pr_info("Link up.\n"); + cnspci->linked = 1; + break; + } else if (time_after(jiffies, time + 50)) { + pr_info("Device not found.\n"); + break; + } + } +} + +static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) +{ + int port = cnspci->hw_pci.domain; + struct pci_sys_data sd = { + .domain = port, + }; + struct pci_bus bus = { + .number = 0, + .ops = &cns3xxx_pcie_ops, + .sysdata = &sd, + }; + u32 io_base = cnspci->res_io.start >> 16; + u32 mem_base = cnspci->res_mem.start >> 16; + u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn; + u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn; + u32 devfn = 0; + u8 tmp8; + u16 pos; + u16 dc; + + host_base = (__pfn_to_phys(host_base) - 1) >> 16; + cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16; + + pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0); + pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1); + pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1); + + pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8); + pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8); + pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8); + + pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base); + pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base); + pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base); + pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base); + + if (!cnspci->linked) + return; + + /* Set Device Max_Read_Request_Size to 128 byte */ + devfn = PCI_DEVFN(1, 0); + pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP); + pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); + dc &= ~(0x3 << 12); /* Clear Device Control Register [14:12] */ + pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc); + pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); + if (!(dc & (0x3 << 12))) + pr_info("PCIe: Set Device Max_Read_Request_Size to 128 byte\n"); + + /* Disable PCIe0 Interrupt Mask INTA to INTD */ + __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port)); +} + +static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + return 0; +} + +static int __init cns3xxx_pcie_init(void) +{ + int i; + + hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, + "imprecise external abort"); + + for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { + iotable_init(cns3xxx_pcie[i].cfg_bases, + ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases)); + cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i)); + cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i)); + cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); + cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]); + pci_common_init(&cns3xxx_pcie[i].hw_pci); + } + + pci_assign_unassigned_resources(); + + return 0; +} +device_initcall(cns3xxx_pcie_init); diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index 725e1a4fc231..38e44706feab 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -6,18 +6,25 @@ * published by the Free Software Foundation. */ +#include <linux/io.h> #include <linux/delay.h> #include <mach/system.h> #include <mach/cns3xxx.h> void cns3xxx_pwr_clk_en(unsigned int block) { - PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK); + u32 reg = __raw_readl(PM_CLK_GATE_REG); + + reg |= (block & PM_CLK_GATE_REG_MASK); + __raw_writel(reg, PM_CLK_GATE_REG); } void cns3xxx_pwr_power_up(unsigned int block) { - PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL); + u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG); + + reg &= ~(block & CNS3XXX_PWR_PLL_ALL); + __raw_writel(reg, PM_PLL_HM_PD_CTRL_REG); /* Wait for 300us for the PLL output clock locked. */ udelay(300); @@ -25,22 +32,29 @@ void cns3xxx_pwr_power_up(unsigned int block) void cns3xxx_pwr_power_down(unsigned int block) { + u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG); + /* write '1' to power down */ - PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL); + reg |= (block & CNS3XXX_PWR_PLL_ALL); + __raw_writel(reg, PM_PLL_HM_PD_CTRL_REG); }; static void cns3xxx_pwr_soft_rst_force(unsigned int block) { + u32 reg = __raw_readl(PM_SOFT_RST_REG); + /* * bit 0, 28, 29 => program low to reset, * the other else program low and then high */ if (block & 0x30000001) { - PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK); + reg &= ~(block & PM_SOFT_RST_REG_MASK); } else { - PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK); - PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK); + reg &= ~(block & PM_SOFT_RST_REG_MASK); + reg |= (block & PM_SOFT_RST_REG_MASK); } + + __raw_writel(reg, PM_SOFT_RST_REG); } void cns3xxx_pwr_soft_rst(unsigned int block) @@ -73,12 +87,13 @@ void arch_reset(char mode, const char *cmd) */ int cns3xxx_cpu_clock(void) { + u32 reg = __raw_readl(PM_CLK_CTRL_REG); int cpu; int cpu_sel; int div_sel; - cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf; - div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3; + cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf; + div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3; cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel; diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index a91edfb8beea..22eb97c1c30b 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -48,19 +48,16 @@ * below 128M */ static inline void -__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes) +__arch_adjust_zones(unsigned long *size, unsigned long *holes) { unsigned int sz = (128<<20) >> PAGE_SHIFT; - if (node != 0) - sz = 0; - size[1] = size[0] - sz; size[0] = sz; } -#define arch_adjust_zones(node, zone_size, holes) \ - if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes) +#define arch_adjust_zones(zone_size, holes) \ + if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20)) diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 5da2cf402c81..f7a12586a1f5 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -752,6 +752,67 @@ void __init dove_xor1_init(void) platform_device_register(&dove_xor11_channel); } +/***************************************************************************** + * SDIO + ****************************************************************************/ +static u64 sdio_dmamask = DMA_BIT_MASK(32); + +static struct resource dove_sdio0_resources[] = { + { + .start = DOVE_SDIO0_PHYS_BASE, + .end = DOVE_SDIO0_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_SDIO0, + .end = IRQ_DOVE_SDIO0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_sdio0 = { + .name = "sdhci-mv", + .id = 0, + .dev = { + .dma_mask = &sdio_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = dove_sdio0_resources, + .num_resources = ARRAY_SIZE(dove_sdio0_resources), +}; + +void __init dove_sdio0_init(void) +{ + platform_device_register(&dove_sdio0); +} + +static struct resource dove_sdio1_resources[] = { + { + .start = DOVE_SDIO1_PHYS_BASE, + .end = DOVE_SDIO1_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_DOVE_SDIO1, + .end = IRQ_DOVE_SDIO1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dove_sdio1 = { + .name = "sdhci-mv", + .id = 1, + .dev = { + .dma_mask = &sdio_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = dove_sdio1_resources, + .num_resources = ARRAY_SIZE(dove_sdio1_resources), +}; + +void __init dove_sdio1_init(void) +{ + platform_device_register(&dove_sdio1); +} + void __init dove_init(void) { int tclk; diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index b29e8937de4f..a51517c3fe76 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -36,5 +36,7 @@ void dove_uart3_init(void); void dove_spi0_init(void); void dove_spi1_init(void); void dove_i2c_init(void); +void dove_sdio0_init(void); +void dove_sdio1_init(void); #endif diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index f2971b745224..bef70460fbc6 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -82,6 +82,8 @@ static void __init dove_db_init(void) dove_ehci0_init(); dove_ehci1_init(); dove_sata_init(&dove_db_sata_data); + dove_sdio0_init(); + dove_sdio1_init(); dove_spi0_init(); dove_spi1_init(); dove_uart0_init(); diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 3a1a855bfdca..f744f676783f 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <mach/hardware.h> @@ -21,26 +20,6 @@ #include <asm/mach/arch.h> -static struct physmap_flash_data adssphere_flash_data = { - .width = 4, -}; - -static struct resource adssphere_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device adssphere_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &adssphere_flash_data, - }, - .num_resources = 1, - .resource = &adssphere_flash_resource, -}; - static struct ep93xx_eth_data __initdata adssphere_eth_data = { .phy_id = 1, }; @@ -48,8 +27,7 @@ static struct ep93xx_eth_data __initdata adssphere_eth_data = { static void __init adssphere_init_machine(void) { ep93xx_init_devices(); - platform_device_register(&adssphere_flash); - + ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); ep93xx_register_eth(&adssphere_eth_data, 1); } diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index e29bdef9b2e2..7f3039761d91 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -185,7 +185,7 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "pll1", &clk_pll1), INIT_CK(NULL, "fclk", &clk_f), INIT_CK(NULL, "hclk", &clk_h), - INIT_CK(NULL, "pclk", &clk_p), + INIT_CK(NULL, "apb_pclk", &clk_p), INIT_CK(NULL, "pll2", &clk_pll2), INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), INIT_CK("ep93xx-keypad", NULL, &clk_keypad), diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 9092677f63eb..8e37a045188c 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -29,6 +29,7 @@ #include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> +#include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/spi/spi.h> @@ -215,8 +216,8 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) spin_lock_irqsave(&syscon_swlock, flags); val = __raw_readl(EP93XX_SYSCON_DEVCFG); - val |= set_bits; val &= ~clear_bits; + val |= set_bits; __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(val, EP93XX_SYSCON_DEVCFG); @@ -348,6 +349,43 @@ static struct platform_device ep93xx_ohci_device = { /************************************************************************* + * EP93xx physmap'ed flash + *************************************************************************/ +static struct physmap_flash_data ep93xx_flash_data; + +static struct resource ep93xx_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ep93xx_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ep93xx_flash_data, + }, + .num_resources = 1, + .resource = &ep93xx_flash_resource, +}; + +/** + * ep93xx_register_flash() - Register the external flash device. + * @width: bank width in octets + * @start: resource start address + * @size: resource size + */ +void __init ep93xx_register_flash(unsigned int width, + resource_size_t start, resource_size_t size) +{ + ep93xx_flash_data.width = width; + + ep93xx_flash_resource.start = start; + ep93xx_flash_resource.end = start + size - 1; + + platform_device_register(&ep93xx_flash); +} + + +/************************************************************************* * EP93xx ethernet peripheral handling *************************************************************************/ static struct ep93xx_eth_data ep93xx_eth_data; @@ -620,6 +658,11 @@ static struct platform_device ep93xx_fb_device = { .resource = ep93xx_fb_resource, }; +static struct platform_device ep93xx_bl_device = { + .name = "ep93xx-bl", + .id = -1, +}; + /** * ep93xx_register_fb - Register the framebuffer platform device. * @data: platform specific framebuffer configuration (__initdata) @@ -628,6 +671,7 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) { ep93xxfb_data = *data; platform_device_register(&ep93xx_fb_device); + platform_device_register(&ep93xx_bl_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 3884182cd362..c2ce9034ba87 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -38,39 +37,13 @@ #include <asm/mach/arch.h> -static struct physmap_flash_data edb93xx_flash_data; - -static struct resource edb93xx_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb93xx_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb93xx_flash_data, - }, - .num_resources = 1, - .resource = &edb93xx_flash_resource, -}; - -static void __init __edb93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size) -{ - edb93xx_flash_data.width = width; - edb93xx_flash_resource.start = start; - edb93xx_flash_resource.end = start + size - 1; - - platform_device_register(&edb93xx_flash); -} - static void __init edb93xx_register_flash(void) { if (machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); + ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); } else { - __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); } } diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index a809618e9f05..d97168c0ba33 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <mach/hardware.h> @@ -21,26 +20,6 @@ #include <asm/mach/arch.h> -static struct physmap_flash_data gesbc9312_flash_data = { - .width = 4, -}; - -static struct resource gesbc9312_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device gesbc9312_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &gesbc9312_flash_data, - }, - .num_resources = 1, - .resource = &gesbc9312_flash_resource, -}; - static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { .phy_id = 1, }; @@ -48,8 +27,7 @@ static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { static void __init gesbc9312_init_machine(void) { ep93xx_init_devices(); - platform_device_register(&gesbc9312_flash); - + ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&gesbc9312_eth_data, 0); } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 9a4413dd44bb..a6c09176334c 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -43,6 +43,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits) unsigned int ep93xx_chip_revision(void); +void ep93xx_register_flash(unsigned int width, + resource_size_t start, resource_size_t size); + void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, struct i2c_board_info *devices, int num); diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 1cc911b4efa6..2ba776320a82 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <linux/io.h> #include <mach/hardware.h> @@ -31,31 +30,6 @@ * Micro9-Lite uses a separate MTD map driver for flash support * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1 *************************************************************************/ -static struct physmap_flash_data micro9_flash_data; - -static struct resource micro9_flash_resource = { - .start = EP93XX_CS1_PHYS_BASE, - .end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device micro9_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = µ9_flash_data, - }, - .num_resources = 1, - .resource = µ9_flash_resource, -}; - -static void __init __micro9_register_flash(unsigned int width) -{ - micro9_flash_data.width = width; - - platform_device_register(µ9_flash); -} - static unsigned int __init micro9_detect_bootwidth(void) { u32 v; @@ -70,10 +44,17 @@ static unsigned int __init micro9_detect_bootwidth(void) static void __init micro9_register_flash(void) { + unsigned int width; + if (machine_is_micro9()) - __micro9_register_flash(4); + width = 4; else if (machine_is_micro9m() || machine_is_micro9s()) - __micro9_register_flash(micro9_detect_bootwidth()); + width = micro9_detect_bootwidth(); + else + width = 0; + + if (width) + ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M); } diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 388aec95f60e..5dded5884133 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -18,7 +18,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -29,26 +28,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -static struct physmap_flash_data simone_flash_data = { - .width = 2, -}; - -static struct resource simone_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device simone_flash = { - .name = "physmap-flash", - .id = 0, - .num_resources = 1, - .resource = &simone_flash_resource, - .dev = { - .platform_data = &simone_flash_data, - }, -}; - static struct ep93xx_eth_data __initdata simone_eth_data = { .phy_id = 1, }; @@ -77,8 +56,7 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = { static void __init simone_init_machine(void) { ep93xx_init_devices(); - - platform_device_register(&simone_flash); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&simone_eth_data, 1); ep93xx_register_fb(&simone_fb_info); ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index ae7319e588c7..93aeab8af705 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -17,7 +17,6 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/m48t86.h> -#include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -173,31 +172,13 @@ static struct platform_device ts72xx_nand_flash = { }; -/************************************************************************* - * NOR flash (TS-7200 only) - *************************************************************************/ -static struct physmap_flash_data ts72xx_nor_data = { - .width = 2, -}; - -static struct resource ts72xx_nor_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ts72xx_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev.platform_data = &ts72xx_nor_data, - .resource = &ts72xx_nor_resource, - .num_resources = 1, -}; - static void __init ts72xx_register_flash(void) { + /* + * TS7200 has NOR flash all other TS72xx board have NAND flash. + */ if (board_is_ts7200()) { - platform_device_register(&ts72xx_nor_flash); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); } else { resource_size_t start; diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-imx/Kconfig index 742fd4e6dcb9..c5c0369bb481 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,42 +1,103 @@ +config IMX_HAVE_DMA_V1 + bool + +if ARCH_MX1 + +config SOC_IMX1 + select CPU_ARM920T + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + bool + +comment "MX1 platforms:" +config MACH_MXLADS + bool + +config ARCH_MX1ADS + bool "MX1ADS platform" + select MACH_MXLADS + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + help + Say Y here if you are using Motorola MX1ADS/MXLADS boards + +config MACH_SCB9328 + bool "Synertronixx scb9328" + select IMX_HAVE_PLATFORM_IMX_UART + help + Say Y here if you are using a Synertronixx scb9328 board + +endif + if ARCH_MX2 +config SOC_IMX21 + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + bool + +config SOC_IMX27 + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + bool + choice prompt "CPUs:" default MACH_MX21 config MACH_MX21 bool "i.MX21 support" - select ARCH_MXC_AUDMUX_V1 + select SOC_IMX21 help This enables support for Freescale's MX2 based i.MX21 processor. config MACH_MX27 bool "i.MX27 support" - select ARCH_MXC_AUDMUX_V1 + select SOC_IMX27 help This enables support for Freescale's MX2 based i.MX27 processor. endchoice -comment "MX2 platforms:" +endif + +if MACH_MX21 + +comment "MX21 platforms:" config MACH_MX21ADS bool "MX21ADS platform" - depends on MACH_MX21 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND help Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. +endif + +if MACH_MX27 + +comment "MX27 platforms:" + config MACH_MX27ADS bool "MX27ADS platform" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND help Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. config MACH_PCM038 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help Include support for phyCORE-i.MX27 (aka pcm038) platform. This @@ -58,7 +119,9 @@ endchoice config MACH_CPUIMX27 bool "Eukrea CPUIMX27 module" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND help Include support for Eukrea CPUIMX27 platform. This includes specific configurations for the module and its peripherals. @@ -67,9 +130,16 @@ config MACH_EUKREA_CPUIMX27_USESDHC2 bool "CPUIMX27 integrates SDHC2 module" depends on MACH_CPUIMX27 help - This adds support for the internal SDHC2 used on CPUIMX27 used + This adds support for the internal SDHC2 used on CPUIMX27 for wifi or eMMC. +config MACH_EUKREA_CPUIMX27_USEUART4 + bool "CPUIMX27 integrates UART4 module" + depends on MACH_CPUIMX27 + help + This adds support for the internal UART4 used on CPUIMX27 + for bluetooth. + choice prompt "Baseboard" depends on MACH_CPUIMX27 @@ -78,6 +148,8 @@ choice config MACH_EUKREA_MBIMX27_BASEBOARD prompt "Eukrea MBIMX27 development board" bool + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX help This adds board specific devices that can be found on Eukrea's MBIMX27 evaluation board. @@ -86,21 +158,24 @@ endchoice config MACH_MX27_3DS bool "MX27PDK platform" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX27 LITEKIT platform. This includes specific configurations for the board and its peripherals. config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help Include support for phyCARD-s (aka pca100) platform. This @@ -108,7 +183,9 @@ config MACH_PCA100 config MACH_MXT_TD60 bool "Maxtrack i-MXT TD60" - depends on MACH_MX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND help Include support for i-MXT (aka td60) platform. This includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-imx/Makefile index e3254faac828..46a9fdfbbd15 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -4,14 +4,24 @@ # Object file lists. -obj-y := devices.o serial.o +obj-y := devices.o -obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o +obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o -obj-$(CONFIG_MACH_MX27) += cpu_imx27.o -obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o +obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o +obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o + +obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o +obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o + +# Support for CMOS sensor interface +obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o + +obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o +obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o + obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index e867398a8fdb..7988a85cf07d 100644 --- a/arch/arm/mach-mx2/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -1,3 +1,7 @@ +zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000 +params_phys-$(CONFIG_ARCH_MX1) := 0x08000100 +initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000 + zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000 params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-imx/clock-imx1.c index 6cf2d4a7511d..c05096c38301 100644 --- a/arch/arm/mach-mx1/clock.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -2,18 +2,17 @@ * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/kernel.h> @@ -29,7 +28,41 @@ #include <mach/clock.h> #include <mach/hardware.h> #include <mach/common.h> -#include "crm_regs.h" + +#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off))) + +/* CCM register addresses */ +#define CCM_CSCR IO_ADDR_CCM(0x0) +#define CCM_MPCTL0 IO_ADDR_CCM(0x4) +#define CCM_SPCTL0 IO_ADDR_CCM(0xc) +#define CCM_PCDR IO_ADDR_CCM(0x20) + +#define CCM_CSCR_CLKO_OFFSET 29 +#define CCM_CSCR_CLKO_MASK (0x7 << 29) +#define CCM_CSCR_USB_OFFSET 26 +#define CCM_CSCR_USB_MASK (0x7 << 26) +#define CCM_CSCR_OSC_EN_SHIFT 17 +#define CCM_CSCR_SYSTEM_SEL (1 << 16) +#define CCM_CSCR_BCLK_OFFSET 10 +#define CCM_CSCR_BCLK_MASK (0xf << 10) +#define CCM_CSCR_PRESC (1 << 15) + +#define CCM_PCDR_PCLK3_OFFSET 16 +#define CCM_PCDR_PCLK3_MASK (0x7f << 16) +#define CCM_PCDR_PCLK2_OFFSET 4 +#define CCM_PCDR_PCLK2_MASK (0xf << 4) +#define CCM_PCDR_PCLK1_OFFSET 0 +#define CCM_PCDR_PCLK1_MASK 0xf + +#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off))) + +/* SCM register addresses */ +#define SCM_GCCR IO_ADDR_SCM(0xc) + +#define SCM_GCCR_DMA_CLK_EN_OFFSET 3 +#define SCM_GCCR_CSI_CLK_EN_OFFSET 2 +#define SCM_GCCR_MMA_CLK_EN_OFFSET 1 +#define SCM_GCCR_USBD_CLK_EN_OFFSET 0 static int _clk_enable(struct clk *clk) { @@ -596,7 +629,8 @@ int __init mx1_clocks_init(unsigned long fref) clk_enable(&hclk); clk_enable(&fclk); - mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT); + mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), + MX1_TIM1_INT); return 0; } diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-imx/clock-imx21.c index bb419ef4d133..bb419ef4d133 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-imx/clock-imx27.c index 0f0823c8b170..5a1aa15c8a16 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) - _REGISTER_CLOCK(NULL, "csi", csi_clk) + _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1) _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk) diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-imx/cpu-imx27.c index d8d3b2d84dc5..d8d3b2d84dc5 100644 --- a/arch/arm/mach-mx2/cpu_imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h new file mode 100644 index 000000000000..a8d94f078196 --- /dev/null +++ b/arch/arm/mach-imx/devices-imx1.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx1.h> +#include <mach/devices-common.h> + +#define imx1_add_i2c_imx(pdata) \ + imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata) + +#define imx1_add_imx_uart0(pdata) \ + imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata) +#define imx1_add_imx_uart1(pdata) \ + imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata) diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h new file mode 100644 index 000000000000..42788e99d127 --- /dev/null +++ b/arch/arm/mach-imx/devices-imx21.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx21.h> +#include <mach/devices-common.h> + +#define imx21_add_i2c_imx(pdata) \ + imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata) + +#define imx21_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata) +#define imx21_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata) +#define imx21_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata) +#define imx21_add_imx_uart3(pdata) \ + imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata) + +#define imx21_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata) + +#define imx21_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata) +#define imx21_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h new file mode 100644 index 000000000000..65e7bb7ec2e8 --- /dev/null +++ b/arch/arm/mach-imx/devices-imx27.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx27.h> +#include <mach/devices-common.h> + +#define imx27_add_i2c_imx0(pdata) \ + imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata) +#define imx27_add_i2c_imx1(pdata) \ + imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata) + +#define imx27_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata) +#define imx27_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata) +#define imx27_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata) +#define imx27_add_imx_uart3(pdata) \ + imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata) +#define imx27_add_imx_uart4(pdata) \ + imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata) +#define imx27_add_imx_uart5(pdata) \ + imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata) + +#define imx27_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata) + +#define imx27_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata) +#define imx27_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata) +#define imx27_add_spi_imx2(pdata) \ + imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata) diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-imx/devices.c index a0aeb8a4adc1..9c271a752b84 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-imx/devices.c @@ -11,6 +11,9 @@ * * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -32,6 +35,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/dma-mapping.h> +#include <linux/serial.h> #include <mach/irqs.h> #include <mach/hardware.h> @@ -40,38 +44,179 @@ #include "devices.h" -/* - * SPI master controller - * - * - i.MX1: 2 channel (slighly different register setting) - * - i.MX21: 2 channel - * - i.MX27: 3 channel - */ -#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \ - static struct resource mxc_spi_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - }, \ - }; \ - \ - struct platform_device mxc_spi_device ## n = { \ - .name = "spi_imx", \ - .id = n, \ - .num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \ - .resource = mxc_spi_resources ## n, \ +#if defined(CONFIG_ARCH_MX1) +static struct resource imx1_camera_resources[] = { + { + .start = 0x00224000, + .end = 0x00224010, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_CSI_INT, + .end = MX1_CSI_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 imx1_camera_dmamask = DMA_BIT_MASK(32); + +struct platform_device imx1_camera_device = { + .name = "mx1-camera", + .id = 0, /* This is used to put cameras on this interface */ + .dev = { + .dma_mask = &imx1_camera_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = imx1_camera_resources, + .num_resources = ARRAY_SIZE(imx1_camera_resources), +}; + +static struct resource imx_rtc_resources[] = { + { + .start = 0x00204000, + .end = 0x00204024, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_RTC_INT, + .end = MX1_RTC_INT, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_RTC_SAMINT, + .end = MX1_RTC_SAMINT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_rtc_device = { + .name = "rtc-imx", + .id = 0, + .resource = imx_rtc_resources, + .num_resources = ARRAY_SIZE(imx_rtc_resources), +}; + +static struct resource imx_wdt_resources[] = { + { + .start = 0x00201000, + .end = 0x00201008, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_WDT_INT, + .end = MX1_WDT_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_wdt_device = { + .name = "imx-wdt", + .id = 0, + .resource = imx_wdt_resources, + .num_resources = ARRAY_SIZE(imx_wdt_resources), +}; + +static struct resource imx_usb_resources[] = { + { + .start = 0x00212000, + .end = 0x00212148, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_USBD_INT0, + .end = MX1_USBD_INT0, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT1, + .end = MX1_USBD_INT1, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT2, + .end = MX1_USBD_INT2, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT3, + .end = MX1_USBD_INT3, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT4, + .end = MX1_USBD_INT4, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT5, + .end = MX1_USBD_INT5, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT6, + .end = MX1_USBD_INT6, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_usb_device = { + .name = "imx_udc", + .id = 0, + .num_resources = ARRAY_SIZE(imx_usb_resources), + .resource = imx_usb_resources, +}; + +/* GPIO port description */ +static struct mxc_gpio_port imx_gpio_ports[] = { + { + .chip.label = "gpio-0", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), + .irq = MX1_GPIO_INT_PORTA, + .virtual_irq_start = MXC_GPIO_IRQ_START, + }, { + .chip.label = "gpio-1", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100), + .irq = MX1_GPIO_INT_PORTB, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32, + }, { + .chip.label = "gpio-2", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200), + .irq = MX1_GPIO_INT_PORTC, + .virtual_irq_start = MXC_GPIO_IRQ_START + 64, + }, { + .chip.label = "gpio-3", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300), + .irq = MX1_GPIO_INT_PORTD, + .virtual_irq_start = MXC_GPIO_IRQ_START + 96, } +}; + +int __init imx1_register_gpios(void) +{ + return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +} +#endif -DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1); -DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2); +#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27) #ifdef CONFIG_MACH_MX27 -DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3); +static struct resource mx27_camera_resources[] = { + { + .start = MX27_CSI_BASE_ADDR, + .end = MX27_CSI_BASE_ADDR + 0x1f, + .flags = IORESOURCE_MEM, + }, { + .start = MX27_EMMA_PRP_BASE_ADDR, + .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f, + .flags = IORESOURCE_MEM, + }, { + .start = MX27_INT_CSI, + .end = MX27_INT_CSI, + .flags = IORESOURCE_IRQ, + },{ + .start = MX27_INT_EMMAPRP, + .end = MX27_INT_EMMAPRP, + .flags = IORESOURCE_IRQ, + }, +}; +struct platform_device mx27_camera_device = { + .name = "mx2-camera", + .id = 0, + .num_resources = ARRAY_SIZE(mx27_camera_resources), + .resource = mx27_camera_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; #endif /* @@ -140,34 +285,6 @@ struct platform_device mxc_w1_master_device = { .resource = mxc_w1_master_resources, }; -#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \ - static struct resource pfx ## _nand_resources[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - }, \ - }; \ - \ - struct platform_device pfx ## _nand_device = { \ - .name = "mxc_nand", \ - .id = 0, \ - .num_resources = ARRAY_SIZE(pfx ## _nand_resources), \ - .resource = pfx ## _nand_resources, \ - } - -#ifdef CONFIG_MACH_MX21 -DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC); -#endif - -#ifdef CONFIG_MACH_MX27 -DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC); -#endif - /* * lcdc: * - i.MX1: the basic controller @@ -218,32 +335,6 @@ struct platform_device mxc_fec_device = { }; #endif -#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \ - static struct resource mxc_i2c_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - } \ - }; \ - \ - struct platform_device mxc_i2c_device ## n = { \ - .name = "imx-i2c", \ - .id = n, \ - .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \ - .resource = mxc_i2c_resources ## n, \ - } - -DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C); - -#ifdef CONFIG_MACH_MX27 -DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2); -#endif - static struct resource mxc_pwm_resources[] = { { .start = MX2x_PWM_BASE_ADDR, @@ -454,26 +545,21 @@ DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); #ifdef CONFIG_MACH_MX21 DEFINE_MXC_GPIO_PORTS(MX21, imx21); + +int __init imx21_register_gpios(void) +{ + return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); +} #endif #ifdef CONFIG_MACH_MX27 DEFINE_MXC_GPIO_PORTS(MX27, imx27); -#endif -int __init mxc_register_gpios(void) +int __init imx27_register_gpios(void) { -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) - return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); - else -#endif - return 0; + return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); } +#endif #ifdef CONFIG_MACH_MX21 static struct resource mx21_usbhc_resources[] = { @@ -501,3 +587,23 @@ struct platform_device mx21_usbhc_device = { }; #endif +static struct resource imx_kpp_resources[] = { + { + .start = MX2x_KPP_BASE_ADDR, + .end = MX2x_KPP_BASE_ADDR + 0xf, + .flags = IORESOURCE_MEM + }, { + .start = MX2x_INT_KPP, + .end = MX2x_INT_KPP, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_kpp_device = { + .name = "imx-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(imx_kpp_resources), + .resource = imx_kpp_resources, +}; + +#endif diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-imx/devices.h index 84ed51380174..efd4527506a5 100644 --- a/arch/arm/mach-mx2/devices.h +++ b/arch/arm/mach-imx/devices.h @@ -1,3 +1,11 @@ +#ifdef CONFIG_ARCH_MX1 +extern struct platform_device imx1_camera_device; +extern struct platform_device imx_rtc_device; +extern struct platform_device imx_wdt_device; +extern struct platform_device imx_usb_device; +#endif + +#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27) extern struct platform_device mxc_gpt1; extern struct platform_device mxc_gpt2; #ifdef CONFIG_MACH_MX27 @@ -6,37 +14,19 @@ extern struct platform_device mxc_gpt4; extern struct platform_device mxc_gpt5; #endif extern struct platform_device mxc_wdt; -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; -extern struct platform_device mxc_uart_device3; -extern struct platform_device mxc_uart_device4; -extern struct platform_device mxc_uart_device5; extern struct platform_device mxc_w1_master_device; -#ifdef CONFIG_MACH_MX21 -extern struct platform_device imx21_nand_device; -#endif -#ifdef CONFIG_MACH_MX27 -extern struct platform_device imx27_nand_device; -#endif extern struct platform_device mxc_fb_device; extern struct platform_device mxc_fec_device; extern struct platform_device mxc_pwm_device; -extern struct platform_device mxc_i2c_device0; -#ifdef CONFIG_MACH_MX27 -extern struct platform_device mxc_i2c_device1; -#endif extern struct platform_device mxc_sdhc_device0; extern struct platform_device mxc_sdhc_device1; extern struct platform_device mxc_otg_udc_device; +extern struct platform_device mx27_camera_device; extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; -extern struct platform_device mxc_spi_device0; -extern struct platform_device mxc_spi_device1; -#ifdef CONFIG_MACH_MX27 -extern struct platform_device mxc_spi_device2; -#endif extern struct platform_device mx21_usbhc_device; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; +extern struct platform_device imx_kpp_device; +#endif diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/mach-imx/dma-v1.c index e16014b0d13c..fd1d9197d06e 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/plat-mxc/dma-mx1-mx2.c + * linux/arch/arm/plat-mxc/dma-v1.c * * i.MX DMA registration and IRQ dispatching * @@ -34,7 +34,7 @@ #include <asm/system.h> #include <asm/irq.h> #include <mach/hardware.h> -#include <mach/dma-mx1-mx2.h> +#include <mach/dma-v1.h> #define DMA_DCR 0x00 /* Control Register */ #define DMA_DISR 0x04 /* Interrupt status Register */ diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index f3b169d5245f..4edc5f439201 100644 --- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com * * Based on pcm970-baseboard.c which is : * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) @@ -24,6 +24,9 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/backlight.h> +#include <video/platform_lcd.h> +#include <linux/input/matrix_keypad.h> #include <asm/mach/arch.h> @@ -32,8 +35,11 @@ #include <mach/imxfb.h> #include <mach/hardware.h> #include <mach/mmc.h> -#include <mach/imx-uart.h> +#include <mach/spi.h> +#include <mach/ssi.h> +#include <mach/audmux.h> +#include "devices-imx27.h" #include "devices.h" static int eukrea_mbimx27_pins[] = { @@ -48,10 +54,12 @@ static int eukrea_mbimx27_pins[] = { PE10_PF_UART3_CTS, PE11_PF_UART3_RTS, /* UART4 */ +#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, PB31_AF_UART4_RXD, +#endif /* SDHC1*/ PE18_PF_SD1_D0, PE19_PF_SD1_D1, @@ -84,10 +92,29 @@ static int eukrea_mbimx27_pins[] = { PA30_PF_CONTRAST, PA31_PF_OE_ACD, /* SPI1 */ - PD28_PF_CSPI1_SS0, PD29_PF_CSPI1_SCLK, PD30_PF_CSPI1_MISO, PD31_PF_CSPI1_MOSI, + /* SSI4 */ +#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ + || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD | GPIO_PUEN, + PC18_PF_SSI4_TXD | GPIO_PUEN, + PC19_PF_SSI4_CLK, +#endif +}; + +static const uint32_t eukrea_mbimx27_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(0, 1, KEY_DOWN), + KEY(1, 0, KEY_RIGHT), + KEY(1, 1, KEY_LEFT), +}; + +static struct matrix_keymap_data eukrea_mbimx27_keymap_data = { + .keymap = eukrea_mbimx27_keymap, + .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), }; static struct gpio_led gpio_leds[] = { @@ -103,12 +130,6 @@ static struct gpio_led gpio_leds[] = { .active_low = 1, .gpio = GPIO_PORTF | 19, }, - { - .name = "backlight", - .default_trigger = "backlight", - .active_low = 0, - .gpio = GPIO_PORTE | 5, - }, }; static struct gpio_led_platform_data gpio_led_info = { @@ -127,7 +148,7 @@ static struct platform_device leds_gpio = { static struct imx_fb_videomode eukrea_mbimx27_modes[] = { { .mode = { - .name = "CMO-QGVA", + .name = "CMO-QVGA", .refresh = 60, .xres = 320, .yres = 240, @@ -141,6 +162,38 @@ static struct imx_fb_videomode eukrea_mbimx27_modes[] = { }, .pcr = 0xFAD08B80, .bpp = 16, + }, { + .mode = { + .name = "DVI-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 32000, + .hsync_len = 1, + .left_margin = 35, + .right_margin = 0, + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 0, + }, + .pcr = 0xFA208B80, + .bpp = 16, + }, { + .mode = { + .name = "DVI-SVGA", + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 25000, + .hsync_len = 1, + .left_margin = 35, + .right_margin = 0, + .vsync_len = 1, + .upper_margin = 7, + .lower_margin = 0, + }, + .pcr = 0xFA208B80, + .bpp = 16, }, }; @@ -153,16 +206,52 @@ static struct imx_fb_platform_data eukrea_mbimx27_fb_data = { .dmacr = 0x00040060, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, - { - .flags = IMXUART_HAVE_RTSCTS, +static void eukrea_mbimx27_bl_set_intensity(int intensity) +{ + if (intensity) + gpio_direction_output(GPIO_PORTE | 5, 1); + else + gpio_direction_output(GPIO_PORTE | 5, 0); +} + +static struct generic_bl_info eukrea_mbimx27_bl_info = { + .name = "eukrea_mbimx27-bl", + .max_intensity = 0xff, + .default_intensity = 0xff, + .set_bl_intensity = eukrea_mbimx27_bl_set_intensity, +}; + +static struct platform_device eukrea_mbimx27_bl_dev = { + .name = "generic-bl", + .id = 1, + .dev = { + .platform_data = &eukrea_mbimx27_bl_info, }, }; -#if defined(CONFIG_TOUCHSCREEN_ADS7846) +static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) + gpio_direction_output(GPIO_PORTA | 25, 1); + else + gpio_direction_output(GPIO_PORTA | 25, 0); +} + +static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = { + .set_power = eukrea_mbimx27_lcd_power_set, +}; + +static struct platform_device eukrea_mbimx27_lcd_powerdev = { + .name = "platform-lcd", + .dev.platform_data = &eukrea_mbimx27_lcd_power_data, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) #define ADS7846_PENDOWN (GPIO_PORTD | 25) @@ -173,7 +262,6 @@ static void ads7846_dev_init(void) printk(KERN_ERR "can't get ads746 pen down GPIO\n"); return; } - gpio_direction_input(ADS7846_PENDOWN); } @@ -186,7 +274,9 @@ static struct ads7846_platform_data ads7846_config __initdata = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, }; +#endif +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846", @@ -201,16 +291,30 @@ static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28}; -static struct spi_imx_master eukrea_mbimx27_spi_0_data = { +static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = { .chipselect = eukrea_mbimx27_spi_cs, .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), }; #endif +static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { + { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, +}; + static struct platform_device *platform_devices[] __initdata = { &leds_gpio, }; +static struct imxmmc_platform_data sdhc_pdata = { + .dat3_card_detect = 1, +}; + +struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE, +}; + /* * system init for baseboard usage. Will be called by cpuimx27 init. * @@ -222,21 +326,52 @@ void __init eukrea_mbimx27_baseboard_init(void) mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); - mxc_register_device(&mxc_uart_device1, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[1]); +#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ + || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) + /* SSI unit master I2S codec connected to SSI_PINS_4*/ + mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, + MXC_AUDMUX_V1_PCR_SYN | + MXC_AUDMUX_V1_PCR_TFSDIR | + MXC_AUDMUX_V1_PCR_TCLKDIR | + MXC_AUDMUX_V1_PCR_RFSDIR | + MXC_AUDMUX_V1_PCR_RCLKDIR | + MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | + MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | + MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) + ); + mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4, + MXC_AUDMUX_V1_PCR_SYN | + MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0) + ); +#endif + + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); +#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) + imx27_add_imx_uart3(&uart_pdata); +#endif mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data); - mxc_register_device(&mxc_sdhc_device0, NULL); + mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata); -#if defined(CONFIG_TOUCHSCREEN_ADS7846) + i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, + ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); + + mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata); + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - /* SPI and ADS7846 Touchscreen controler init */ - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + /* ADS7846 Touchscreen controller init */ mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN); - mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data); + ads7846_dev_init(); +#endif + +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + /* SPI_CS0 init */ + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); - ads7846_dev_init(); #endif /* Leds configuration */ @@ -244,6 +379,14 @@ void __init eukrea_mbimx27_baseboard_init(void) mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT); /* Backlight */ mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT); + gpio_request(GPIO_PORTE | 5, "backlight"); + platform_device_register(&eukrea_mbimx27_bl_dev); + /* LCD Reset */ + mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT); + gpio_request(GPIO_PORTA | 25, "lcd_enable"); + platform_device_register(&eukrea_mbimx27_lcd_powerdev); + + mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h new file mode 100644 index 000000000000..df5f522da6b3 --- /dev/null +++ b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h @@ -0,0 +1,10 @@ +#ifndef __MACH_DMA_MX1_MX2_H__ +#define __MACH_DMA_MX1_MX2_H__ +/* + * Don't use this header in new code, it will go away when all users are + * converted to mach/dma-v1.h + */ + +#include <mach/dma-v1.h> + +#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-v1.h index 7c4870bd5a21..287431cc13e5 100644 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ b/arch/arm/mach-imx/include/mach/dma-v1.h @@ -1,5 +1,5 @@ /* - * linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h + * linux/arch/arm/mach-imx/include/mach/dma-v1.h * * i.MX DMA registration and IRQ dispatching * @@ -22,8 +22,10 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_DMA_H -#define __ASM_ARCH_MXC_DMA_H +#ifndef __MACH_DMA_V1_H__ +#define __MACH_DMA_V1_H__ + +#define imx_has_dma_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) #define IMX_DMA_CHANNELS 16 @@ -102,4 +104,4 @@ enum imx_dma_prio { int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio); -#endif /* _ASM_ARCH_MXC_DMA_H */ +#endif /* __MACH_DMA_V1_H__ */ diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 1f616dcaabc9..575ff1ae85a7 100644 --- a/arch/arm/mach-mx2/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -26,20 +26,24 @@ #include <linux/mtd/physmap.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/board-eukrea_cpuimx27.h> +#include <mach/eukrea-baseboards.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/i2c.h> #include <mach/iomux-mx27.h> -#include <mach/imx-uart.h> #include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> +#include "devices-imx27.h" #include "devices.h" static int eukrea_cpuimx27_pins[] = { @@ -49,10 +53,12 @@ static int eukrea_cpuimx27_pins[] = { PE14_PF_UART1_CTS, PE15_PF_UART1_RTS, /* UART4 */ +#if defined(MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, PB31_AF_UART4_RXD, +#endif /* FEC */ PD0_AIN_FEC_TXD0, PD1_AIN_FEC_TXD1, @@ -76,19 +82,47 @@ static int eukrea_cpuimx27_pins[] = { PD17_PF_I2C_DATA, PD18_PF_I2C_CLK, /* SDHC2 */ +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) PB4_PF_SD2_D0, PB5_PF_SD2_D1, PB6_PF_SD2_D2, PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, +#endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) /* Quad UART's IRQ */ - GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN, - GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN, - GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN, - GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN, + GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN, + GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN, + GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN, + GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN, #endif + /* OTG */ + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PC9_PF_USBOTG_DATA0, + PC10_PF_USBOTG_DATA2, + PC11_PF_USBOTG_DATA1, + PC12_PF_USBOTG_DATA4, + PC13_PF_USBOTG_DATA3, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PE2_PF_USBOTG_DIR, + PE24_PF_USBOTG_CLK, + PE25_PF_USBOTG_DATA7, + /* USBH2 */ + PA0_PF_USBH2_CLK, + PA1_PF_USBH2_DIR, + PA2_PF_USBH2_DATA7, + PA3_PF_USBH2_NXT, + PA4_PF_USBH2_STP, + PD19_AF_USBH2_DATA4, + PD20_AF_USBH2_DATA3, + PD21_AF_USBH2_DATA6, + PD22_AF_USBH2_DATA0, + PD23_AF_USBH2_DATA2, + PD24_AF_USBH2_DATA1, + PD26_AF_USBH2_DATA5, }; static struct physmap_flash_data eukrea_cpuimx27_flash_data = { @@ -111,15 +145,12 @@ static struct platform_device eukrea_cpuimx27_nor_mtd_device = { .resource = &eukrea_cpuimx27_flash_resource, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = { +static const struct mxc_nand_platform_data +cpuimx27_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -127,9 +158,11 @@ static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = { static struct platform_device *platform_devices[] __initdata = { &eukrea_cpuimx27_nor_mtd_device, &mxc_fec_device, + &mxc_wdt, + &mxc_w1_master_device, }; -static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = { +static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = { .bitrate = 100000, }; @@ -182,34 +215,83 @@ static struct platform_device serial_device = { }; #endif +#if defined(CONFIG_USB_ULPI) +static struct mxc_usbh_platform_data otg_pdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata = { + .portsc = MXC_EHCI_MODE_ULPI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; +#endif + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +static int otg_mode_host; + +static int __init eukrea_cpuimx27_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", eukrea_cpuimx27_otg_mode); + static void __init eukrea_cpuimx27_init(void) { mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); + imx27_add_imx_uart0(&uart_pdata); - mxc_register_device(&imx27_nand_device, - &eukrea_cpuimx27_nand_board_info); + imx27_add_mxc_nand(&cpuimx27_nand_board_info); i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data); + imx27_add_i2c_imx1(&cpuimx27_i2c1_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) /* SDHC2 can be used for Wifi */ mxc_register_device(&mxc_sdhc_device1, NULL); +#endif +#if defined(MACH_EUKREA_CPUIMX27_USEUART4) /* in which case UART4 is also used for Bluetooth */ - mxc_register_device(&mxc_uart_device3, &uart_pdata[1]); + imx27_add_imx_uart3(&uart_pdata); #endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) platform_device_register(&serial_device); #endif +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &otg_pdata); + } + + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif + if (!otg_mode_host) + mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD eukrea_mbimx27_baseboard_init(); #endif diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index b5710bf18b96..22a2b5d91213 100644 --- a/arch/arm/mach-mx2/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/platform_device.h> @@ -26,10 +22,9 @@ #include <asm/mach/map.h> #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx27.h> -#include <mach/board-mx27lite.h> +#include "devices-imx27.h" #include "devices.h" static unsigned int mx27lite_pins[] = { @@ -59,7 +54,7 @@ static unsigned int mx27lite_pins[] = { PF23_AIN_FEC_TX_EN, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -71,7 +66,7 @@ static void __init mx27lite_init(void) { mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx27_add_imx_uart0(&uart_pdata); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 51f3cfd83db2..77a760cfadc0 100644 --- a/arch/arm/mach-mx1/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -26,10 +26,10 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/i2c.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx1.h> #include <mach/irqs.h> +#include "devices-imx1.h" #include "devices.h" static int mx1ads_pins[] = { @@ -58,12 +58,12 @@ static int mx1ads_pins[] = { * UARTs platform data */ -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart0_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct imxuart_platform_data uart1_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; /* @@ -75,8 +75,8 @@ static struct physmap_flash_data mx1ads_flash_data = { }; static struct resource flash_resource = { - .start = IMX_CS0_PHYS, - .end = IMX_CS0_PHYS + SZ_32M - 1, + .start = MX1_CS0_PHYS, + .end = MX1_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; @@ -98,7 +98,7 @@ static struct pcf857x_platform_data pcf857x_data[] = { } }; -static struct imxi2c_platform_data mx1ads_i2c_data = { +static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = { .bitrate = 100000, }; @@ -121,8 +121,8 @@ static void __init mx1ads_init(void) ARRAY_SIZE(mx1ads_pins), "mx1ads"); /* UART */ - mxc_register_device(&imx_uart1_device, &uart_pdata[0]); - mxc_register_device(&imx_uart2_device, &uart_pdata[1]); + imx1_add_imx_uart0(&uart0_pdata); + imx1_add_imx_uart1(&uart1_pdata); /* Physmap flash */ mxc_register_device(&flash_device, &mx1ads_flash_data); @@ -131,7 +131,7 @@ static void __init mx1ads_init(void) i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); - mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); + imx1_add_i2c_imx(&mx1ads_i2c_data); } static void __init mx1ads_timer_init(void) @@ -145,8 +145,8 @@ struct sys_timer mx1ads_timer = { MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ - .phys_io = IMX_IO_PHYS, - .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, + .phys_io = MX1_IO_BASE_ADDR, + .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, @@ -155,8 +155,8 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") - .phys_io = IMX_IO_PHYS, - .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, + .phys_io = MX1_IO_BASE_ADDR, + .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX1_PHYS_OFFSET + 0x100, .map_io = mx1_map_io, .init_irq = mx1_init_irq, diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 113e58d7cb40..96d7f8189f32 100644 --- a/arch/arm/mach-mx2/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/platform_device.h> @@ -28,15 +24,49 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/imx-uart.h> #include <mach/imxfb.h> #include <mach/iomux-mx21.h> #include <mach/mxc_nand.h> #include <mach/mmc.h> -#include <mach/board-mx21ads.h> +#include "devices-imx21.h" #include "devices.h" +/* + * Memory-mapped I/O on MX21ADS base board + */ +#define MX21ADS_MMIO_BASE_ADDR 0xf5000000 +#define MX21ADS_MMIO_SIZE SZ_16M + +#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ + (MX21ADS_MMIO_BASE_ADDR + (offset)) + +#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) +#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) +#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) +#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) +#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) + +/* MX21ADS_IO_REG bit definitions */ +#define MX21ADS_IO_SD_WP 0x0001 /* read */ +#define MX21ADS_IO_TP6 0x0001 /* write */ +#define MX21ADS_IO_SW_SEL 0x0002 /* read */ +#define MX21ADS_IO_TP7 0x0002 /* write */ +#define MX21ADS_IO_RESET_E_UART 0x0004 +#define MX21ADS_IO_RESET_BASE 0x0008 +#define MX21ADS_IO_CSI_CTL2 0x0010 +#define MX21ADS_IO_CSI_CTL1 0x0020 +#define MX21ADS_IO_CSI_CTL0 0x0040 +#define MX21ADS_IO_UART1_EN 0x0080 +#define MX21ADS_IO_UART4_EN 0x0100 +#define MX21ADS_IO_LCDON 0x0200 +#define MX21ADS_IO_IRDA_EN 0x0400 +#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 +#define MX21ADS_IO_IRDA_MD0_B 0x1000 +#define MX21ADS_IO_IRDA_MD1 0x2000 +#define MX21ADS_IO_LED4_ON 0x4000 +#define MX21ADS_IO_LED3_ON 0x8000 + static unsigned int mx21ads_pins[] = { /* CS8900A */ @@ -133,14 +163,13 @@ static struct platform_device mx21ads_nor_mtd_device = { .resource = &mx21ads_flash_resource, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata_rts __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxuart_platform_data uart_norts_pdata = { +static const struct imxuart_platform_data uart_pdata_norts __initconst = { }; - static int mx21ads_fb_init(struct platform_device *pdev) { u16 tmp; @@ -227,7 +256,8 @@ static struct imxmmc_platform_data mx21ads_sdhc_pdata = { .exit = mx21ads_sdhc_exit, }; -static struct mxc_nand_platform_data mx21ads_nand_board_info = { +static const struct mxc_nand_platform_data +mx21ads_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -263,12 +293,12 @@ static void __init mx21ads_board_init(void) mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), "mx21ads"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_norts_pdata); - mxc_register_device(&mxc_uart_device3, &uart_pdata); + imx21_add_imx_uart0(&uart_pdata_rts); + imx21_add_imx_uart2(&uart_pdata_norts); + imx21_add_imx_uart3(&uart_pdata_rts); mxc_register_device(&mxc_fb_device, &mx21ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata); - mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info); + imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index b2f4e0db3fb3..e66ffaa1c26c 100644 --- a/arch/arm/mach-mx2/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -12,23 +12,25 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * This machine is known as: + * - i.MX27 3-Stack Development System + * - i.MX27 Platform Development Kit (i.MX27 PDK) */ #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/input/matrix_keypad.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx27.h> -#include <mach/board-mx27pdk.h> +#include "devices-imx27.h" #include "devices.h" static unsigned int mx27pdk_pins[] = { @@ -58,7 +60,7 @@ static unsigned int mx27pdk_pins[] = { PF23_AIN_FEC_TX_EN, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -66,12 +68,34 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_fec_device, }; +/* + * Matrix keyboard + */ + +static const uint32_t mx27_3ds_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(0, 1, KEY_DOWN), + KEY(1, 0, KEY_RIGHT), + KEY(1, 1, KEY_LEFT), + KEY(1, 2, KEY_ENTER), + KEY(2, 0, KEY_F6), + KEY(2, 1, KEY_F8), + KEY(2, 2, KEY_F9), + KEY(2, 3, KEY_F10), +}; + +static struct matrix_keymap_data mx27_3ds_keymap_data = { + .keymap = mx27_3ds_keymap, + .keymap_size = ARRAY_SIZE(mx27_3ds_keymap), +}; + static void __init mx27pdk_init(void) { mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx27_add_imx_uart0(&uart_pdata); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data); } static void __init mx27pdk_timer_init(void) diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 6ce323669e58..9c77da98a10e 100644 --- a/arch/arm/mach-mx2/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/platform_device.h> @@ -32,16 +28,44 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx27.h> -#include <mach/board-mx27ads.h> #include <mach/mxc_nand.h> -#include <mach/i2c.h> #include <mach/imxfb.h> #include <mach/mmc.h> +#include "devices-imx27.h" #include "devices.h" +/* + * Base address of PBC controller, CS4 + */ +#define PBC_BASE_ADDRESS 0xf4300000 +#define PBC_REG_ADDR(offset) (void __force __iomem *) \ + (PBC_BASE_ADDRESS + (offset)) + +/* When the PBC address connection is fixed in h/w, defined as 1 */ +#define PBC_ADDR_SH 0 + +/* Offsets for the PBC Controller register */ +/* + * PBC Board version register offset + */ +#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 set address. + */ +#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 clear address. + */ +#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) + +/* PBC Board Control Register 1 bit definitions */ +#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ + +/* to determine the correct external crystal reference */ +#define CKIH_27MHZ_BIT_SET (1 << 3) + static unsigned int mx27ads_pins[] = { /* UART0 */ PE12_PF_UART1_TXD, @@ -141,7 +165,8 @@ static unsigned int mx27ads_pins[] = { PB9_PF_SD2_CLK, }; -static struct mxc_nand_platform_data mx27ads_nand_board_info = { +static const struct mxc_nand_platform_data +mx27ads_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -168,7 +193,7 @@ static struct platform_device mx27ads_nor_mtd_device = { .resource = &mx27ads_flash_resource, }; -static struct imxi2c_platform_data mx27ads_i2c_data = { +static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = { .bitrate = 100000, }; @@ -263,20 +288,8 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_w1_master_device, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; static void __init mx27ads_board_init(void) @@ -284,18 +297,18 @@ static void __init mx27ads_board_init(void) mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), "mx27ads"); - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&mxc_uart_device3, &uart_pdata[3]); - mxc_register_device(&mxc_uart_device4, &uart_pdata[4]); - mxc_register_device(&mxc_uart_device5, &uart_pdata[5]); - mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info); + imx27_add_imx_uart0(&uart_pdata); + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); + imx27_add_imx_uart3(&uart_pdata); + imx27_add_imx_uart4(&uart_pdata); + imx27_add_imx_uart5(&uart_pdata); + imx27_add_mxc_nand(&mx27ads_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); - mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data); + imx27_add_i2c_imx1(&mx27ads_i2c1_data); mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); @@ -342,4 +355,3 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .init_machine = mx27ads_board_init, .timer = &mx27ads_timer, MACHINE_END - diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index bc3855992677..a3a1e452d4c5 100644 --- a/arch/arm/mach-mx2/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/platform_device.h> @@ -32,14 +28,13 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <linux/gpio.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx27.h> #include <mach/mxc_nand.h> -#include <mach/i2c.h> #include <linux/i2c/pca953x.h> #include <mach/imxfb.h> #include <mach/mmc.h> +#include "devices-imx27.h" #include "devices.h" static unsigned int mxt_td60_pins[] __initdata = { @@ -128,12 +123,13 @@ static unsigned int mxt_td60_pins[] __initdata = { PB9_PF_SD2_CLK, }; -static struct mxc_nand_platform_data mxt_td60_nand_board_info = { +static const struct mxc_nand_platform_data +mxt_td60_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; -static struct imxi2c_platform_data mxt_td60_i2c_data = { +static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = { .bitrate = 100000, }; @@ -173,7 +169,7 @@ static struct i2c_board_info mxt_td60_i2c_devices[] = { }, }; -static struct imxi2c_platform_data mxt_td60_i2c2_data = { +static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = { .bitrate = 100000, }; @@ -239,14 +235,8 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_fec_device, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; static void __init mxt_td60_board_init(void) @@ -254,10 +244,10 @@ static void __init mxt_td60_board_init(void) mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), "MXT_TD60"); - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info); + imx27_add_imx_uart0(&uart_pdata); + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); + imx27_add_mxc_nand(&mxt_td60_nand_board_info); i2c_register_board_info(0, mxt_td60_i2c_devices, ARRAY_SIZE(mxt_td60_i2c_devices)); @@ -265,8 +255,8 @@ static void __init mxt_td60_board_init(void) i2c_register_board_info(1, mxt_td60_i2c2_devices, ARRAY_SIZE(mxt_td60_i2c2_devices)); - mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data); - mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data); + imx27_add_i2c_imx0(&mxt_td60_i2c0_data); + imx27_add_i2c_imx1(&mxt_td60_i2c1_data); mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index a87422ed4ff5..6c92deaf468f 100644 --- a/arch/arm/mach-mx2/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -36,12 +36,7 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx27.h> -#include <mach/i2c.h> #include <asm/mach/time.h> -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) -#include <mach/spi.h> -#endif -#include <mach/imx-uart.h> #include <mach/audmux.h> #include <mach/ssi.h> #include <mach/mxc_nand.h> @@ -49,11 +44,16 @@ #include <mach/mmc.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include <mach/imxfb.h> +#include "devices-imx27.h" #include "devices.h" #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) +#define SPI1_SS0 (GPIO_PORTD + 28) +#define SPI1_SS1 (GPIO_PORTD + 27) +#define SD2_CD (GPIO_PORTC + 29) static int pca100_pins[] = { /* UART1 */ @@ -68,6 +68,7 @@ static int pca100_pins[] = { PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, + SD2_CD | GPIO_GPIO | GPIO_IN, /* FEC */ PD0_AIN_FEC_TXD0, PD1_AIN_FEC_TXD1, @@ -131,13 +132,42 @@ static int pca100_pins[] = { PD23_AF_USBH2_DATA2, PD24_AF_USBH2_DATA1, PD26_AF_USBH2_DATA5, + /* display */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA26_PF_PS, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA31_PF_OE_ACD, + /* free GPIO */ + GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */ + GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */ + GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */ }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data pca100_nand_board_info = { +static const struct mxc_nand_platform_data +pca100_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -148,7 +178,7 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_wdt, }; -static struct imxi2c_platform_data pca100_i2c_1_data = { +static const struct imxi2c_platform_data pca100_i2c1_data __initconst = { .bitrate = 100000, }; @@ -189,9 +219,9 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = { }, }; -static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27}; +static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1}; -static struct spi_imx_master pca100_spi_0_data = { +static const struct spi_imx_master pca100_spi0_data __initconst = { .chipselect = pca100_spi_cs, .num_chipselect = ARRAY_SIZE(pca100_spi_cs), }; @@ -253,6 +283,7 @@ static struct imxmmc_platform_data sdhc_pdata = { .exit = pca100_sdhc2_exit, }; +#if defined(CONFIG_USB_ULPI) static int otg_phy_init(struct platform_device *pdev) { gpio_set_value(OTG_PHY_CS_GPIO, 0); @@ -276,6 +307,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +#endif static struct fsl_usb2_platform_data otg_device_pdata = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -297,6 +329,45 @@ static int __init pca100_otg_mode(char *options) } __setup("otg_mode=", pca100_otg_mode); +/* framebuffer info */ +static struct imx_fb_videomode pca100_fb_modes[] = { + { + .mode = { + .name = "EMERGING-ETV570G0DHU", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39722, /* in ps (25.175 MHz) */ + .hsync_len = 30, + .left_margin = 114, + .right_margin = 16, + .vsync_len = 3, + .upper_margin = 32, + .lower_margin = 0, + }, + /* + * TFT + * Pixel pol active high + * HSYNC active low + * VSYNC active low + * use HSYNC for ACD count + * line clock disable while idle + * always enable line clock even if no data + */ + .pcr = 0xf0c08080, + .bpp = 16, + }, +}; + +static struct imx_fb_platform_data pca100_fb_data = { + .mode = pca100_fb_modes, + .num_modes = ARRAY_SIZE(pca100_fb_modes), + + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + static void __init pca100_init(void) { int ret; @@ -320,33 +391,24 @@ static void __init pca100_init(void) mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx27_add_imx_uart0(&uart_pdata); - mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); - mxc_register_device(&imx27_nand_device, &pca100_nand_board_info); + imx27_add_mxc_nand(&pca100_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pca100_i2c_devices, ARRAY_SIZE(pca100_i2c_devices)); - mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data); - - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT); - - /* GPIO0_IRQ */ - mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN); - /* GPIO1_IRQ */ - mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN); - /* GPIO2_IRQ */ - mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN); + imx27_add_i2c_imx1(&pca100_i2c1_data); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); + mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); spi_register_board_info(pca100_spi_board_info, ARRAY_SIZE(pca100_spi_board_info)); - mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data); + imx27_add_spi_imx0(&pca100_spi_0_data); #endif gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); @@ -372,6 +434,8 @@ static void __init pca100_init(void) mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); } + mxc_register_device(&mxc_fb_device, &pca100_fb_data); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 36c89431679a..9212e8f37001 100644 --- a/arch/arm/mach-mx2/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -35,14 +35,12 @@ #include <mach/board-pcm038.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/i2c.h> #include <mach/iomux-mx27.h> -#include <mach/imx-uart.h> #include <mach/mxc_nand.h> -#include <mach/spi.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx27.h" #include "devices.h" static int pcm038_pins[] = { @@ -162,17 +160,12 @@ static struct platform_device pcm038_nor_mtd_device = { .resource = &pcm038_flash_resource, }; -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data pcm038_nand_board_info = { +static const struct mxc_nand_platform_data +pcm038_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -192,7 +185,7 @@ static void __init pcm038_init_sram(void) mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00); } -static struct imxi2c_platform_data pcm038_i2c_1_data = { +static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { .bitrate = 100000, }; @@ -215,7 +208,7 @@ static struct i2c_board_info pcm038_i2c_devices[] = { static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; -static struct spi_imx_master pcm038_spi_0_data = { +static const struct spi_imx_master pcm038_spi0_data __initconst = { .chipselect = pcm038_spi_cs, .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), }; @@ -305,18 +298,18 @@ static void __init pcm038_init(void) pcm038_init_sram(); - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); + imx27_add_imx_uart0(&uart_pdata); + imx27_add_imx_uart1(&uart_pdata); + imx27_add_imx_uart2(&uart_pdata); mxc_gpio_mode(PE16_AF_OWIRE); - mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info); + imx27_add_mxc_nand(&pcm038_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); - mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); + imx27_add_i2c_imx1(&pcm038_i2c1_data); /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); @@ -326,7 +319,7 @@ static void __init pcm038_init(void) /* MC13783 IRQ */ mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); - mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data); + imx27_add_spi_imx0(&pcm038_spi0_data); spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info)); diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index 7587a7a12460..88bf0d1e26e6 100644 --- a/arch/arm/mach-mx1/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -22,17 +22,17 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx1.h> +#include "devices-imx1.h" #include "devices.h" /* * This scb9328 has a 32MiB flash */ static struct resource flash_resource = { - .start = IMX_CS0_PHYS, - .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1, + .start = MX1_CS0_PHYS, + .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, .flags = IORESOURCE_MEM, }; @@ -70,13 +70,13 @@ static struct dm9000_plat_data dm9000_platdata = { static struct resource dm9000x_resources[] = { { .name = "address area", - .start = IMX_CS5_PHYS, - .end = IMX_CS5_PHYS + 1, + .start = MX1_CS5_PHYS, + .end = MX1_CS5_PHYS + 1, .flags = IORESOURCE_MEM, /* address access */ }, { .name = "data area", - .start = IMX_CS5_PHYS + 4, - .end = IMX_CS5_PHYS + 5, + .start = MX1_CS5_PHYS + 4, + .end = MX1_CS5_PHYS + 5, .flags = IORESOURCE_MEM, /* data access */ }, { .start = IRQ_GPIOC(3), @@ -108,14 +108,13 @@ static int uart1_mxc_init(struct platform_device *pdev) ARRAY_SIZE(mxc_uart1_pins), "UART1"); } -static int uart1_mxc_exit(struct platform_device *pdev) +static void uart1_mxc_exit(struct platform_device *pdev) { mxc_gpio_release_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins)); - return 0; } -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .init = uart1_mxc_init, .exit = uart1_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, @@ -131,7 +130,7 @@ static struct platform_device *devices[] __initdata = { */ static void __init scb9328_init(void) { - mxc_register_device(&imx_uart1_device, &uart_pdata); + imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-imx/mm-imx1.c index 7f9fc1034c08..9be92b96dc89 100644 --- a/arch/arm/mach-mx1/generic.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -3,7 +3,7 @@ * Created: april 20th, 2004 * Copyright: Synertronixx GmbH * - * Common code for i.MX machines + * Common code for i.MX1 machines * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,11 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/kernel.h> #include <linux/init.h> @@ -31,23 +26,25 @@ static struct map_desc imx_io_desc[] __initdata = { { - .virtual = IMX_IO_BASE, - .pfn = __phys_to_pfn(IMX_IO_PHYS), - .length = IMX_IO_SIZE, - .type = MT_DEVICE + .virtual = MX1_IO_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR), + .length = MX1_IO_SIZE, + .type = MT_DEVICE } }; void __init mx1_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX1); - mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR)); + mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } +int imx1_register_gpios(void); + void __init mx1_init_irq(void) { - mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); + mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); + imx1_register_gpios(); } - diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 64134314d012..12faeeaa0a97 100644 --- a/arch/arm/mach-mx2/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-mx2/mm-imx21.c + * arch/arm/mach-imx/mm-imx21.c * * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) * @@ -77,7 +77,10 @@ void __init mx21_map_io(void) iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); } +int imx21_register_gpios(void); + void __init mx21_init_irq(void) { mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); + imx21_register_gpios(); } diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 3366ed44cfd5..a24622957ff2 100644 --- a/arch/arm/mach-mx2/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-mx2/mm-imx27.c + * arch/arm/mach-imx/mm-imx27.c * * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) * @@ -77,7 +77,10 @@ void __init mx27_map_io(void) iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); } +int imx27_register_gpios(void); + void __init mx27_init_irq(void) { mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); + imx27_register_gpios(); } diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c index b09ee12a4ff0..b09ee12a4ff0 100644 --- a/arch/arm/mach-mx1/ksym_mx1.c +++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S index 9c69aa65bf17..9c69aa65bf17 100644 --- a/arch/arm/mach-mx1/mx1_camera_fiq.S +++ b/arch/arm/mach-imx/mx1-camera-fiq.S diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index f490a406d57e..f490a406d57e 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c new file mode 100644 index 000000000000..afc17ce0bb54 --- /dev/null +++ b/arch/arm/mach-imx/pm-imx27.c @@ -0,0 +1,46 @@ +/* + * i.MX27 Power Management Routines + * + * Based on Freescale's BSP + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> +#include <mach/system.h> +#include <mach/mx27.h> + +static int mx27_suspend_enter(suspend_state_t state) +{ + u32 cscr; + switch (state) { + case PM_SUSPEND_MEM: + /* Clear MPEN and SPEN to disable MPLL/SPLL */ + cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + cscr &= 0xFFFFFFFC; + __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); + /* Executes WFI */ + arch_idle(); + break; + + default: + return -EINVAL; + } + return 0; +} + +static struct platform_suspend_ops mx27_suspend_ops = { + .enter = mx27_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init mx27_pm_init(void) +{ + suspend_set_ops(&mx27_suspend_ops); + return 0; +} + +device_initcall(mx27_pm_init); diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h new file mode 100644 index 000000000000..5f96e1518aa9 --- /dev/null +++ b/arch/arm/mach-integrator/common.h @@ -0,0 +1 @@ +void integrator_reserve(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index b02cfc06e0ae..8f4fb6d638f7 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -14,6 +14,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/memblock.h> #include <linux/sched.h> #include <linux/smp.h> #include <linux/termios.h> @@ -30,6 +31,7 @@ #include <asm/system.h> #include <asm/leds.h> #include <asm/mach/time.h> +#include <asm/pgtable.h> static struct amba_pl010_data integrator_uart_data; @@ -119,8 +121,13 @@ static struct clk uartclk = { .rate = 14745600, }; +static struct clk dummy_apb_pclk; + static struct clk_lookup lookups[] = { - { /* UART0 */ + { /* Bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, }, { /* UART1 */ @@ -215,3 +222,13 @@ void cm_control(u32 mask, u32 set) } EXPORT_SYMBOL(cm_control); + +/* + * We need to stop things allocating the low memory; ideally we need a + * better implementation of GFP_DMA which does not assume that DMA-able + * memory starts at zero. + */ +void __init integrator_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET); +} diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 227cf4d05088..6ab5a03ab9d8 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -48,6 +48,8 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> +#include "common.h" + /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx * is the (PA >> 12). @@ -502,6 +504,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = ap_map_io, + .reserve = integrator_reserve, .init_irq = ap_init_irq, .timer = &ap_timer, .init_machine = ap_init, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index cde57b2b83b5..05db40e3c4f7 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -43,6 +43,8 @@ #include <plat/timer-sp.h> +#include "common.h" + #define INTCP_PA_FLASH_BASE 0x24000000 #define INTCP_FLASH_SIZE SZ_32M @@ -601,6 +603,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = intcp_map_io, + .reserve = integrator_reserve, .init_irq = intcp_init_irq, .timer = &cp_timer, .init_machine = intcp_init, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 9cef0590d5aa..6467d99fa2ee 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -505,10 +505,10 @@ void __init pci_v3_preinit(void) /* * Hook in our fault handler for PCI errors */ - hook_fault_code(4, v3_pci_fault, SIGBUS, "external abort on linefetch"); - hook_fault_code(6, v3_pci_fault, SIGBUS, "external abort on linefetch"); - hook_fault_code(8, v3_pci_fault, SIGBUS, "external abort on non-linefetch"); - hook_fault_code(10, v3_pci_fault, SIGBUS, "external abort on non-linefetch"); + hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch"); + hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch"); + hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); + hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); spin_lock_irqsave(&v3_lock, flags); diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h index 25b1da9a5035..7415e4338651 100644 --- a/arch/arm/mach-iop13xx/include/mach/memory.h +++ b/arch/arm/mach-iop13xx/include/mach/memory.h @@ -69,6 +69,4 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x) #endif /* CONFIG_ARCH_IOP13XX */ #endif /* !ASSEMBLY */ -#define PFN_TO_NID(addr) (0) - #endif diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 6d5a90813d31..773ea0c95b9f 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -987,7 +987,7 @@ void __init iop13xx_pci_init(void) iop13xx_atux_setup(); } - hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, + hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0, "imprecise external abort"); } diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 90771cad06f8..f797c5f538b0 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -209,7 +209,7 @@ ixp2000_pci_preinit(void) "the needed workaround has not been configured in"); #endif - hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, + hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0, "PCI config cycle to non-existent device"); } diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 4b0e598a91c9..563819a83292 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -229,7 +229,7 @@ void __init ixp23xx_pci_preinit(void) { ixp23xx_pci_common_init(); - hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, + hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0, "PCI config cycle to non-existent device"); *IXP23XX_PCI_ADDR_EXT = 0x0000e000; diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index e3181534c7f9..61cd4d64b985 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -348,7 +348,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) * This is really ugly and we need a better way of specifying * DMA-capable regions of memory. */ -void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, +void __init ixp4xx_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size) { unsigned int sz = SZ_64M >> PAGE_SHIFT; @@ -356,7 +356,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, /* * Only adjust if > 64M on current system */ - if (node || (zone_size[0] <= sz)) + if (zone_size[0] <= sz) return; zone_size[1] = zone_size[0] - sz; @@ -382,7 +382,8 @@ void __init ixp4xx_pci_preinit(void) /* hook in our fault handler for PCI errors */ - hook_fault_code(16+6, abort_handler, SIGBUS, "imprecise external abort"); + hook_fault_code(16+6, abort_handler, SIGBUS, 0, + "imprecise external abort"); pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n"); diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h index 98f5e5e20980..0136eaa29224 100644 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ b/arch/arm/mach-ixp4xx/include/mach/memory.h @@ -16,10 +16,10 @@ #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI) -void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes); +void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes); -#define arch_adjust_zones(node, size, holes) \ - ixp4xx_adjust_zones(node, size, holes) +#define arch_adjust_zones(size, holes) \ + ixp4xx_adjust_zones(size, holes) #define ISA_DMA_THRESHOLD (SZ_64M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M) diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 29b2163b1fe3..cc25501b57fa 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -75,6 +75,13 @@ config MACH_OPENRD_CLIENT Say 'Y' here if you want your kernel to support the Marvell OpenRD Client Board. +config MACH_OPENRD_ULTIMATE + bool "Marvell OpenRD Ultimate Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Ultimate Board. + config MACH_NETSPACE_V2 bool "LaCie Network Space v2 NAS Board" help @@ -87,6 +94,12 @@ config MACH_INETSPACE_V2 Say 'Y' here if you want your kernel to support the LaCie Internet Space v2 NAS. +config MACH_NETSPACE_MAX_V2 + bool "LaCie Network Space Max v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space Max v2 NAS. + config MACH_NET2BIG_V2 bool "LaCie 2Big Network v2 NAS Board" help @@ -99,6 +112,12 @@ config MACH_NET5BIG_V2 Say 'Y' here if you want your kernel to support the LaCie 5Big Network v2 NAS. +config MACH_T5325 + bool "HP t5325 Thin Client" + help + Say 'Y' here if you want your kernel to support the + HP t5325 Thin Client. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index c0cd5d362002..295d7baa6ae1 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -12,7 +12,9 @@ obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o +obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 2e69168fc699..8d03bcef5182 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -31,6 +31,8 @@ #define ATTR_DEV_CS0 0x3e #define ATTR_PCIE_IO 0xe0 #define ATTR_PCIE_MEM 0xe8 +#define ATTR_PCIE1_IO 0xd0 +#define ATTR_PCIE1_MEM 0xd8 #define ATTR_SRAM 0x01 /* @@ -106,17 +108,21 @@ void __init kirkwood_setup_cpu_mbus(void) TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE); setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE); + setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, + TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE); + setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE); /* * Setup window for NAND controller. */ - setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, + setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, TARGET_DEV_BUS, ATTR_DEV_NAND, -1); /* * Setup window for SRAM. */ - setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, + setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1); /* diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 6072eaa5e66a..9dd67c7b4459 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -44,6 +44,11 @@ static struct map_desc kirkwood_io_desc[] __initdata = { .length = KIRKWOOD_PCIE_IO_SIZE, .type = MT_DEVICE, }, { + .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE, + .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE), + .length = KIRKWOOD_PCIE1_IO_SIZE, + .type = MT_DEVICE, + }, { .virtual = KIRKWOOD_REGS_VIRT_BASE, .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), .length = KIRKWOOD_REGS_SIZE, @@ -402,7 +407,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) u32 dev, rev; kirkwood_pcie_id(&dev, &rev); - if (rev == 0) /* catch all Kirkwood Z0's */ + if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */ mvsdio_data->clock = 100000000; else mvsdio_data->clock = 200000000; @@ -847,8 +852,10 @@ int __init kirkwood_find_tclk(void) u32 dev, rev; kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 || - rev == MV88F6281_REV_A1)) + + if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 || + rev == MV88F6281_REV_A1)) || + (dev == MV88F6282_DEV_ID)) return 200000000; return 166666667; @@ -891,13 +898,22 @@ static char * __init kirkwood_id(void) return "MV88F6192-Z0"; else if (rev == MV88F6192_REV_A0) return "MV88F6192-A0"; + else if (rev == MV88F6192_REV_A1) + return "MV88F6192-A1"; else return "MV88F6192-Rev-Unsupported"; } else if (dev == MV88F6180_DEV_ID) { if (rev == MV88F6180_REV_A0) return "MV88F6180-Rev-A0"; + else if (rev == MV88F6180_REV_A1) + return "MV88F6180-Rev-A1"; else return "MV88F6180-Rev-Unsupported"; + } else if (dev == MV88F6282_DEV_ID) { + if (rev == MV88F6282_REV_A0) + return "MV88F6282-Rev-A0"; + else + return "MV88F6282-Rev-Unsupported"; } else { return "Device-Unknown"; } @@ -949,12 +965,14 @@ void __init kirkwood_init(void) static int __init kirkwood_clock_gate(void) { unsigned int curr = readl(CLOCK_GATING_CTRL); + u32 dev, rev; + kirkwood_pcie_id(&dev, &rev); printk(KERN_DEBUG "Gating clock of unused units\n"); printk(KERN_DEBUG "before: 0x%08x\n", curr); /* Make sure those units are accessible */ - writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL); + writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL); /* For SATA: first shutdown the phy */ if (!(kirkwood_clk_ctrl & CGC_SATA0)) { @@ -979,6 +997,18 @@ static int __init kirkwood_clock_gate(void) writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); } + /* For PCIe 1: first shutdown the phy */ + if (dev == MV88F6282_DEV_ID) { + if (!(kirkwood_clk_ctrl & CGC_PEX1)) { + writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL); + while (1) + if (readl(PCIE1_STATUS) & 0x1) + break; + writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL); + } + } else /* keep this bit set for devices that don't have PCIe1 */ + kirkwood_clk_ctrl |= CGC_PEX1; + /* Now gate clock the required units */ writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL); printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL)); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 05e8a8a5692e..5b2c1c18d641 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -18,6 +18,9 @@ struct mvsdio_platform_data; struct mtd_partition; struct mtd_info; +#define KW_PCIE0 (1 << 0) +#define KW_PCIE1 (1 << 1) + /* * Basic Kirkwood init functions used early by machine-setup. */ @@ -34,7 +37,7 @@ void kirkwood_ehci_init(void); void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data); void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data); void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq); -void kirkwood_pcie_init(void); +void kirkwood_pcie_init(unsigned int portmask); void kirkwood_sata_init(struct mv_sata_platform_data *sata_data); void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data); void kirkwood_spi_init(void); diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index 39bdf4bcace9..16f6691e7c68 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -51,6 +51,14 @@ static struct mvsdio_platform_data db88f6281_mvsdio_data = { }; static unsigned int db88f6281_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP18_NF_IO0, + MPP19_NF_IO1, MPP37_GPIO, MPP38_GPIO, 0 @@ -74,9 +82,15 @@ static void __init db88f6281_init(void) static int __init db88f6281_pci_init(void) { - if (machine_is_db88f6281_bp()) - kirkwood_pcie_init(); + if (machine_is_db88f6281_bp()) { + u32 dev, rev; + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); + else + kirkwood_pcie_init(KW_PCIE0); + } return 0; } subsys_initcall(db88f6281_pci_init); diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 418f5017c50e..aff0e1327e38 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -59,8 +59,9 @@ #define CGC_SATA1 (1 << 15) #define CGC_XOR1 (1 << 16) #define CGC_CRYPTO (1 << 17) +#define CGC_PEX1 (1 << 18) #define CGC_GE1 (1 << 19) #define CGC_TDM (1 << 20) -#define CGC_RESERVED ((1 << 18) | (0x6 << 21)) +#define CGC_RESERVED (0x6 << 21) #endif diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h index f00a0a45a67e..9da2eb59180b 100644 --- a/arch/arm/mach-kirkwood/include/mach/irqs.h +++ b/arch/arm/mach-kirkwood/include/mach/irqs.h @@ -23,6 +23,7 @@ #define IRQ_KIRKWOOD_XOR_10 7 #define IRQ_KIRKWOOD_XOR_11 8 #define IRQ_KIRKWOOD_PCIE 9 +#define IRQ_KIRKWOOD_PCIE1 10 #define IRQ_KIRKWOOD_GE00_SUM 11 #define IRQ_KIRKWOOD_GE01_SUM 15 #define IRQ_KIRKWOOD_USB 19 diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index a15cf0ee22bd..d141af4c2744 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -16,36 +16,48 @@ * Marvell Kirkwood address maps. * * phys - * e0000000 PCIe Memory space + * e0000000 PCIe #0 Memory space + * e8000000 PCIe #1 Memory space * f1000000 on-chip peripheral registers - * f2000000 PCIe I/O space - * f3000000 NAND controller address window - * f4000000 Security Accelerator SRAM + * f2000000 PCIe #0 I/O space + * f3000000 PCIe #1 I/O space + * f4000000 NAND controller address window + * f5000000 Security Accelerator SRAM * * virt phys size - * fee00000 f1000000 1M on-chip peripheral registers - * fef00000 f2000000 1M PCIe I/O space + * fed00000 f1000000 1M on-chip peripheral registers + * fee00000 f2000000 1M PCIe #0 I/O space + * fef00000 f3000000 1M PCIe #1 I/O space */ -#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000 +#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000 #define KIRKWOOD_SRAM_SIZE SZ_2K -#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000 +#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000 #define KIRKWOOD_NAND_MEM_SIZE SZ_1K +#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 +#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000 +#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00000000 +#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M + #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000 +#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000 #define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 #define KIRKWOOD_PCIE_IO_SIZE SZ_1M #define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000 +#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000 #define KIRKWOOD_REGS_SIZE SZ_1M #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M +#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000 +#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000 +#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M + /* * Register Map */ @@ -72,6 +84,9 @@ #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) #define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) #define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) +#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000) +#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70) +#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -107,8 +122,12 @@ #define MV88F6192_DEV_ID 0x6192 #define MV88F6192_REV_Z0 0 #define MV88F6192_REV_A0 2 +#define MV88F6192_REV_A1 3 #define MV88F6180_DEV_ID 0x6180 #define MV88F6180_REV_A0 2 +#define MV88F6180_REV_A1 3 +#define MV88F6282_DEV_ID 0x6282 +#define MV88F6282_REV_A0 0 #endif diff --git a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h new file mode 100644 index 000000000000..e21272e5f668 --- /dev/null +++ b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h @@ -0,0 +1,26 @@ +/* + * arch/arm/mach-kirkwood/include/mach/leds-ns2.h + * + * Platform data structure for Network Space v2 LED driver + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_LEDS_NS2_H +#define __MACH_LEDS_NS2_H + +struct ns2_led { + const char *name; + const char *default_trigger; + unsigned cmd; + unsigned slow; +}; + +struct ns2_led_platform_data { + int num_leds; + struct ns2_led *leds; +}; + +#endif /* __MACH_LEDS_NS2_H */ diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index a5900f64e38c..065187d177c6 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -23,7 +23,8 @@ static unsigned int __init kirkwood_variant(void) kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) + if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) || + (dev == MV88F6282_DEV_ID)) return MPP_F6281_MASK; if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0) return MPP_F6192_MASK; diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index bc74278ed311..9b0a94d85c3e 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -11,7 +11,7 @@ #ifndef __KIRKWOOD_MPP_H #define __KIRKWOOD_MPP_H -#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \ +#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \ /* MPP number */ ((_num) & 0xff) | \ /* MPP select value */ (((_sel) & 0xf) << 8) | \ /* may be input signal */ ((!!(_in)) << 12) | \ @@ -19,282 +19,332 @@ /* available on F6180 */ ((!!(_F6180)) << 14) | \ /* available on F6190 */ ((!!(_F6190)) << 15) | \ /* available on F6192 */ ((!!(_F6192)) << 16) | \ - /* available on F6281 */ ((!!(_F6281)) << 17)) + /* available on F6281 */ ((!!(_F6281)) << 17) | \ + /* available on F6282 */ ((!!(_F6282)) << 18)) #define MPP_NUM(x) ((x) & 0xff) #define MPP_SEL(x) (((x) >> 8) & 0xf) - /* num sel i o 6180 6190 6192 6281 */ - -#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0, 0, 0 ) -#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0, 0, 0 ) - -#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0 ) -#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0 ) -#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0 ) -#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1 ) - -#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1 ) - -#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1 ) - -#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1 ) - -#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1 ) - -#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1 ) -#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1 ) -#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1 ) - -#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1 ) -#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1 ) -#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1 ) - -#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1 ) -#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1 ) -#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1 ) - -#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1 ) -#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1 ) -#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1 ) - -#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_TW_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1 ) -#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1 ) -#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1 ) -#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1 ) -#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1 ) -#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1 ) - -#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP9_TW_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1 ) -#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1 ) -#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1 ) -#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1 ) -#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1 ) - -#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1 ) -#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1 ) -#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1 ) -#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1 ) - -#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1 ) -#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1 ) -#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1 ) -#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1 ) -#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1 ) -#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1 ) - -#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1 ) - -#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1 ) - -#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1 ) -#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1 ) -#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1 ) - -#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1 ) -#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1 ) -#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1 ) - -#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1 ) -#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1 ) -#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1 ) -#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1 ) - -#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1 ) - -#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1 ) - -#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1 ) -#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1 ) - -#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP20_GE1_0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP20_AUDIO_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1 ) -#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1 ) - -#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP21_GE1_1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP21_AUDIO_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1 ) -#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1 ) - -#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP22_GE1_2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP22_AUDIO_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1 ) -#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1 ) - -#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1 ) -#define MPP23_GE1_3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP23_AUDIO_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1 ) -#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1 ) - -#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP24_TDM_SPI_CS0 DEV( 24, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP24_GE1_4 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP24_AUDIO_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1 ) - -#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP25_GE1_5 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP25_AUDIO_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1 ) - -#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1 ) -#define MPP26_GE1_6 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP26_AUDIO_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1 ) - -#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP27_GE1_7 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP27_AUDIO_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1 ) - -#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1 ) -#define MPP28_GE1_8 MPP( 28, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP28_AUDIO_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1 ) - -#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1 ) -#define MPP29_GE1_9 MPP( 29, 0x3, 0, 0, 0, 1, 1, 1 ) - -#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1 ) -#define MPP30_GE1_10 MPP( 30, 0x3, 0, 0, 0, 1, 1, 1 ) - -#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1 ) -#define MPP31_GE1_11 MPP( 31, 0x3, 0, 0, 0, 1, 1, 1 ) - -#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1 ) -#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1 ) -#define MPP32_GE1_12 MPP( 32, 0x3, 0, 0, 0, 1, 1, 1 ) - -#define MPP33_GPIO MPP( 33, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP33_GE1_13 MPP( 33, 0x3, 0, 0, 0, 1, 1, 1 ) - -#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1 ) -#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP34_GE1_14 MPP( 34, 0x3, 0, 0, 0, 1, 1, 1 ) - -#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1 ) -#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1 ) -#define MPP35_GE1_15 MPP( 35, 0x3, 0, 0, 0, 1, 1, 1 ) -#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1 ) -#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1 ) - -#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1 ) -#define MPP36_AUDIO_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1 ) - -#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1 ) -#define MPP37_AUDIO_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1 ) - -#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1 ) -#define MPP38_AUDIO_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1 ) - -#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1 ) -#define MPP39_AUDIO_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1 ) - -#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1 ) -#define MPP40_AUDIO_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1 ) - -#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1 ) -#define MPP41_AUDIO_I2SLRC MPP( 41, 0x4, 0, 1, 1, 0, 0, 1 ) - -#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1 ) -#define MPP42_AUDIO_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1 ) - -#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1 ) -#define MPP43_AUDIO_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1 ) - -#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1 ) -#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1 ) -#define MPP44_AUDIO_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1 ) - -#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1 ) -#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1 ) - -#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1 ) -#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1 ) - -#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1 ) -#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1 ) - -#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 ) -#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1 ) - -#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 ) -#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 ) -#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1 ) -#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1 ) + /* num sel i o 6180 6190 6192 6281 6282 */ + +#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0, 0, 0, 0 ) +#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0, 0, 0, 0 ) + +#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 ) +#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 ) +#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 ) +#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 ) + +#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 ) + +#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 ) + +#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 ) + +#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 ) + +#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 ) + +#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 ) + +#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 ) +#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 ) + +#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 ) + +#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 ) + +#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) + +#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 ) + +#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 ) + +#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 ) +#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 ) +#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 ) + +#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 ) + +#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 ) +#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 ) + +#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 ) + +#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 ) + +#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 ) + +#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) +#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 ) + +#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 ) + +#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 ) + +#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 ) +#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) +#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 ) +#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) + +#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) +#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 ) +#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 ) +#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP_MAX 49 diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 5e6f711b1c67..c6b92b42eb4e 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -155,7 +155,7 @@ static void __init mv88f6281gtw_ge_init(void) static int __init mv88f6281gtw_ge_pci_init(void) { if (machine_is_mv88f6281gtw_ge()) - kirkwood_pcie_init(); + kirkwood_pcie_init(KW_PCIE0); return 0; } diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 3ae158d72681..d26bf324738b 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -39,6 +39,7 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/kirkwood.h> +#include <mach/leds-ns2.h> #include <plat/time.h> #include "common.h" #include "mpp.h" @@ -126,6 +127,18 @@ static void __init netspace_v2_sata_power_init(void) } if (err) pr_err("netspace_v2: failed to setup SATA0 power\n"); + + if (machine_is_netspace_max_v2()) { + err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power"); + if (err == 0) { + err = gpio_direction_output( + NETSPACE_V2_GPIO_SATA1_POWER, 1); + if (err) + gpio_free(NETSPACE_V2_GPIO_SATA1_POWER); + } + if (err) + pr_err("netspace_v2: failed to setup SATA1 power\n"); + } } /***************************************************************************** @@ -160,36 +173,12 @@ static struct platform_device netspace_v2_gpio_buttons = { * GPIO LEDs ****************************************************************************/ -/* - * The blue front LED is wired to a CPLD and can blink in relation with the - * SATA activity. - * - * The following array detail the different LED registers and the combination - * of their possible values: - * - * cmd_led | slow_led | /SATA active | LED state - * | | | - * 1 | 0 | x | off - * - | 1 | x | on - * 0 | 0 | 1 | on - * 0 | 0 | 0 | blink (rate 300ms) - */ - #define NETSPACE_V2_GPIO_RED_LED 12 -#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 -#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 - static struct gpio_led netspace_v2_gpio_led_pins[] = { { - .name = "ns_v2:blue:sata", - .default_trigger = "default-on", - .gpio = NETSPACE_V2_GPIO_BLUE_LED_CMD, - .active_low = 1, - }, - { - .name = "ns_v2:red:fail", - .gpio = NETSPACE_V2_GPIO_RED_LED, + .name = "ns_v2:red:fail", + .gpio = NETSPACE_V2_GPIO_RED_LED, }, }; @@ -206,22 +195,33 @@ static struct platform_device netspace_v2_gpio_leds = { }, }; -static void __init netspace_v2_gpio_leds_init(void) -{ - int err; +/***************************************************************************** + * Dual-GPIO CPLD LEDs + ****************************************************************************/ - /* Configure register slow_led to allow SATA activity LED blinking */ - err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow"); - if (err == 0) { - err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0); - if (err) - gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); - } - if (err) - pr_err("netspace_v2: failed to configure blue LED slow GPIO\n"); +#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 +#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 - platform_device_register(&netspace_v2_gpio_leds); -} +static struct ns2_led netspace_v2_led_pins[] = { + { + .name = "ns_v2:blue:sata", + .cmd = NETSPACE_V2_GPIO_BLUE_LED_CMD, + .slow = NETSPACE_V2_GPIO_BLUE_LED_SLOW, + }, +}; + +static struct ns2_led_platform_data netspace_v2_leds_data = { + .num_leds = ARRAY_SIZE(netspace_v2_led_pins), + .leds = netspace_v2_led_pins, +}; + +static struct platform_device netspace_v2_leds = { + .name = "leds-ns2", + .id = -1, + .dev = { + .platform_data = &netspace_v2_leds_data, + }, +}; /***************************************************************************** * Timer @@ -249,17 +249,21 @@ static unsigned int netspace_v2_mpp_config[] __initdata = { MPP4_NF_IO6, MPP5_NF_IO7, MPP6_SYSRST_OUTn, - MPP8_TW_SDA, - MPP9_TW_SCK, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP12_GPO, /* Red led */ MPP14_GPIO, /* USB fuse */ MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ MPP18_NF_IO0, MPP19_NF_IO1, MPP20_SATA1_ACTn, MPP21_SATA0_ACTn, + MPP22_GPIO, /* Fan speed (bit 0) */ + MPP23_GPIO, /* Fan power */ MPP24_GPIO, /* USB mode select */ MPP25_GPIO, /* Fan rotation fail */ MPP26_GPIO, /* USB device vbus */ @@ -268,6 +272,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = { MPP30_GPIO, /* Blue led (command register) */ MPP31_GPIO, /* Board power off */ MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP33_GPO, /* Fan speed (bit 2) */ 0 }; @@ -299,7 +304,8 @@ static void __init netspace_v2_init(void) i2c_register_board_info(0, netspace_v2_i2c_info, ARRAY_SIZE(netspace_v2_i2c_info)); - netspace_v2_gpio_leds_init(); + platform_device_register(&netspace_v2_leds); + platform_device_register(&netspace_v2_gpio_leds); platform_device_register(&netspace_v2_gpio_buttons); if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && @@ -332,3 +338,15 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") .timer = &netspace_v2_timer, MACHINE_END #endif + +#ifdef CONFIG_MACH_NETSPACE_MAX_V2 +MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netspace_v2_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index 8a2bb0228e4f..2bd14c5079de 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -270,8 +270,8 @@ static unsigned int net2big_v2_mpp_config[] __initdata = { MPP3_SPI_MISO, MPP6_SYSRST_OUTn, MPP7_GPO, /* Request power-off */ - MPP8_TW_SDA, - MPP9_TW_SCK, + MPP8_TW0_SDA, + MPP9_TW0_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP13_GPIO, /* Rear power switch (on|auto) */ @@ -306,8 +306,8 @@ static unsigned int net5big_v2_mpp_config[] __initdata = { MPP3_SPI_MISO, MPP6_SYSRST_OUTn, MPP7_GPO, /* Request power-off */ - MPP8_TW_SDA, - MPP9_TW_SCK, + MPP8_TW0_SDA, + MPP9_TW0_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP13_GPIO, /* Rear power switch (on|auto) */ @@ -315,20 +315,20 @@ static unsigned int net5big_v2_mpp_config[] __initdata = { MPP15_GPIO, /* Rear power switch (auto|off) */ MPP16_GPIO, /* SATA HDD1 power */ MPP17_GPIO, /* SATA HDD2 power */ - MPP20_GE1_0, - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, + MPP20_GE1_TXD0, + MPP21_GE1_TXD1, + MPP22_GE1_TXD2, + MPP23_GE1_TXD3, + MPP24_GE1_RXD0, + MPP25_GE1_RXD1, + MPP26_GE1_RXD2, + MPP27_GE1_RXD3, MPP28_GPIO, /* USB enable host vbus */ MPP29_GPIO, /* CPLD extension ALE */ - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, + MPP30_GE1_RXCTL, + MPP31_GE1_RXCLK, + MPP32_GE1_TCLKOUT, + MPP33_GE1_TXCTL, MPP34_GPIO, /* Rear Push button */ MPP35_GPIO, /* Inhibit switch power-off */ MPP36_GPIO, /* SATA HDD1 presence */ diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index ad3f1ec33796..fd64cd2b4e0a 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-kirkwood/openrd-setup.c * - * Marvell OpenRD (Base|Client) Board Setup + * Marvell OpenRD (Base|Client|Ultimate) Board Setup * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -73,9 +73,15 @@ static void __init openrd_init(void) kirkwood_ehci_init(); + if (machine_is_openrd_ultimate()) { + openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1); + } + kirkwood_ge00_init(&openrd_ge00_data); - if (machine_is_openrd_client()) + if (!machine_is_openrd_base()) kirkwood_ge01_init(&openrd_ge01_data); + kirkwood_sata_init(&openrd_sata_data); kirkwood_sdio_init(&openrd_mvsdio_data); @@ -84,8 +90,10 @@ static void __init openrd_init(void) static int __init openrd_pci_init(void) { - if (machine_is_openrd_base() || machine_is_openrd_client()) - kirkwood_pcie_init(); + if (machine_is_openrd_base() || + machine_is_openrd_client() || + machine_is_openrd_ultimate()) + kirkwood_pcie_init(KW_PCIE0); return 0; } @@ -116,3 +124,16 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") .timer = &kirkwood_timer, MACHINE_END #endif + +#ifdef CONFIG_MACH_OPENRD_ULTIMATE +MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") + /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = openrd_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index dee1eff50d39..55e7f00836b7 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -18,29 +18,43 @@ #include <mach/bridge-regs.h> #include "common.h" +void __init kirkwood_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE); + *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE); +} -#define PCIE_BASE ((void __iomem *)PCIE_VIRT_BASE) +struct pcie_port { + u8 root_bus_nr; + void __iomem *base; + spinlock_t conf_lock; + int irq; + struct resource res[2]; +}; -void __init kirkwood_pcie_id(u32 *dev, u32 *rev) +static int pcie_port_map[2]; +static int num_pcie_ports; + +static inline struct pcie_port *bus_to_port(struct pci_bus *bus) { - *dev = orion_pcie_dev_id(PCIE_BASE); - *rev = orion_pcie_rev(PCIE_BASE); + struct pci_sys_data *sys = bus->sysdata; + return sys->private_data; } -static int pcie_valid_config(int bus, int dev) +static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) { /* * Don't go out when trying to access -- * 1. nonexisting device on local bus * 2. where there's no device connected (no link) */ - if (bus == 0 && dev == 0) + if (bus == pp->root_bus_nr && dev == 0) return 1; - if (!orion_pcie_link_up(PCIE_BASE)) + if (!orion_pcie_link_up(pp->base)) return 0; - if (bus == 0 && dev != 1) + if (bus == pp->root_bus_nr && dev != 1) return 0; return 1; @@ -52,22 +66,22 @@ static int pcie_valid_config(int bus, int dev) * and then reading the PCIE_CONF_DATA register. Need to make sure these * transactions are atomic. */ -static DEFINE_SPINLOCK(kirkwood_pcie_lock); static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 *val) { + struct pcie_port *pp = bus_to_port(bus); unsigned long flags; int ret; - if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { *val = 0xffffffff; return PCIBIOS_DEVICE_NOT_FOUND; } - spin_lock_irqsave(&kirkwood_pcie_lock, flags); - ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val); - spin_unlock_irqrestore(&kirkwood_pcie_lock, flags); + spin_lock_irqsave(&pp->conf_lock, flags); + ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); + spin_unlock_irqrestore(&pp->conf_lock, flags); return ret; } @@ -75,15 +89,16 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 val) { + struct pcie_port *pp = bus_to_port(bus); unsigned long flags; int ret; - if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) + if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) return PCIBIOS_DEVICE_NOT_FOUND; - spin_lock_irqsave(&kirkwood_pcie_lock, flags); - ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val); - spin_unlock_irqrestore(&kirkwood_pcie_lock, flags); + spin_lock_irqsave(&pp->conf_lock, flags); + ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); + spin_unlock_irqrestore(&pp->conf_lock, flags); return ret; } @@ -93,50 +108,98 @@ static struct pci_ops pcie_ops = { .write = pcie_wr_conf, }; - -static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) +static void __init pcie0_ioresources_init(struct pcie_port *pp) { - struct resource *res; - extern unsigned int kirkwood_clk_ctrl; + pp->base = (void __iomem *)PCIE_VIRT_BASE; + pp->irq = IRQ_KIRKWOOD_PCIE; /* - * Generic PCIe unit setup. + * IORESOURCE_IO */ - orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info); + pp->res[0].name = "PCIe 0 I/O Space"; + pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE; + pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; + pp->res[0].flags = IORESOURCE_IO; /* - * Request resources. + * IORESOURCE_MEM */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("pcie_setup unable to alloc resources"); + pp->res[1].name = "PCIe 0 MEM"; + pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE; + pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; + pp->res[1].flags = IORESOURCE_MEM; +} + +static void __init pcie1_ioresources_init(struct pcie_port *pp) +{ + pp->base = (void __iomem *)PCIE1_VIRT_BASE; + pp->irq = IRQ_KIRKWOOD_PCIE1; /* * IORESOURCE_IO */ - res[0].name = "PCIe I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; - res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCIe IO resource failed\n"); - sys->resource[0] = &res[0]; + pp->res[0].name = "PCIe 1 I/O Space"; + pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE; + pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1; + pp->res[0].flags = IORESOURCE_IO; /* * IORESOURCE_MEM */ - res[1].name = "PCIe Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE; - res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCIe Memory resource failed\n"); - sys->resource[1] = &res[1]; + pp->res[1].name = "PCIe 1 MEM"; + pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE; + pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1; + pp->res[1].flags = IORESOURCE_MEM; +} + +static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) +{ + extern unsigned int kirkwood_clk_ctrl; + struct pcie_port *pp; + int index; + if (nr >= num_pcie_ports) + return 0; + + index = pcie_port_map[nr]; + printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index); + + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + panic("PCIe: failed to allocate pcie_port data"); + sys->private_data = pp; + pp->root_bus_nr = sys->busnr; + spin_lock_init(&pp->conf_lock); + + switch (index) { + case 0: + kirkwood_clk_ctrl |= CGC_PEX0; + pcie0_ioresources_init(pp); + break; + case 1: + kirkwood_clk_ctrl |= CGC_PEX1; + pcie1_ioresources_init(pp); + break; + default: + panic("PCIe setup: invalid controller %d", index); + } + + if (request_resource(&ioport_resource, &pp->res[0])) + panic("Request PCIe%d IO resource failed\n", index); + if (request_resource(&iomem_resource, &pp->res[1])) + panic("Request PCIe%d Memory resource failed\n", index); + + sys->resource[0] = &pp->res[0]; + sys->resource[1] = &pp->res[1]; sys->resource[2] = NULL; sys->io_offset = 0; - kirkwood_clk_ctrl |= CGC_PEX0; + /* + * Generic PCIe unit setup. + */ + orion_pcie_set_local_bus_nr(pp->base, sys->busnr); + + orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info); return 1; } @@ -163,7 +226,7 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) { struct pci_bus *bus; - if (nr == 0) { + if (nr < num_pcie_ports) { bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); } else { bus = NULL; @@ -175,18 +238,37 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - return IRQ_KIRKWOOD_PCIE; + struct pcie_port *pp = bus_to_port(dev->bus); + + return pp->irq; } static struct hw_pci kirkwood_pci __initdata = { - .nr_controllers = 1, .swizzle = pci_std_swizzle, .setup = kirkwood_pcie_setup, .scan = kirkwood_pcie_scan_bus, .map_irq = kirkwood_pcie_map_irq, }; -void __init kirkwood_pcie_init(void) +static void __init add_pcie_port(int index, unsigned long base) { + printk(KERN_INFO "Kirkwood PCIe port %d: ", index); + + if (orion_pcie_link_up((void __iomem *)base)) { + printk(KERN_INFO "link up\n"); + pcie_port_map[num_pcie_ports++] = index; + } else + printk(KERN_INFO "link down, ignoring\n"); +} + +void __init kirkwood_pcie_init(unsigned int portmask) +{ + if (portmask & KW_PCIE0) + add_pcie_port(0, PCIE_VIRT_BASE); + + if (portmask & KW_PCIE1) + add_pcie_port(1, PCIE1_VIRT_BASE); + + kirkwood_pci.nr_controllers = num_pcie_ports; pci_common_init(&kirkwood_pci); } diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 3bf6304158f6..c34718c2cfe5 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -71,7 +71,7 @@ static void __init rd88f6192_init(void) static int __init rd88f6192_pci_init(void) { if (machine_is_rd88f6192_nas()) - kirkwood_pcie_init(); + kirkwood_pcie_init(KW_PCIE0); return 0; } diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 31708ddbc83e..3d1477135e12 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -107,7 +107,7 @@ static void __init rd88f6281_init(void) static int __init rd88f6281_pci_init(void) { if (machine_is_rd88f6281()) - kirkwood_pcie_init(); + kirkwood_pcie_init(KW_PCIE0); return 0; } diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c new file mode 100644 index 000000000000..d01bf89cedbe --- /dev/null +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -0,0 +1,194 @@ +/* + * + * HP t5325 Thin Client setup + * + * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <linux/i2c.h> +#include <linux/mv643xx_eth.h> +#include <linux/ata_platform.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +struct mtd_partition hp_t5325_partitions[] = { + { + .name = "u-boot env", + .size = SZ_64K, + .offset = SZ_512K + SZ_256K, + }, + { + .name = "permanent u-boot env", + .size = SZ_64K, + .offset = MTDPART_OFS_APPEND, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "HP env", + .size = SZ_64K, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "u-boot", + .size = SZ_512K, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "SSD firmware", + .size = SZ_256K, + .offset = SZ_512K, + }, +}; + +const struct flash_platform_data hp_t5325_flash = { + .type = "mx25l8005", + .name = "spi_flash", + .parts = hp_t5325_partitions, + .nr_parts = ARRAY_SIZE(hp_t5325_partitions), +}; + +struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &hp_t5325_flash, + .irq = -1, + }, +}; + +static struct mv643xx_eth_platform_data hp_t5325_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv_sata_platform_data hp_t5325_sata_data = { + .n_ports = 2, +}; + +static struct gpio_keys_button hp_t5325_buttons[] = { + { + .code = KEY_POWER, + .gpio = 45, + .desc = "Power", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data hp_t5325_button_data = { + .buttons = hp_t5325_buttons, + .nbuttons = ARRAY_SIZE(hp_t5325_buttons), +}; + +static struct platform_device hp_t5325_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &hp_t5325_button_data, + } +}; + +static unsigned int hp_t5325_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_SPI_SCn, + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_SD_CLK, + MPP13_GPIO, + MPP14_GPIO, + MPP15_GPIO, + MPP16_GPIO, + MPP17_GPIO, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, + MPP21_GPIO, + MPP22_GPIO, + MPP23_GPIO, + MPP32_GPIO, + MPP33_GE1_TXCTL, + MPP39_AU_I2SBCLK, + MPP40_AU_I2SDO, + MPP41_AU_I2SLRCLK, + MPP42_AU_I2SMCLK, + MPP45_GPIO, /* Power button */ + MPP48_GPIO, /* Board power off */ + 0 +}; + +#define HP_T5325_GPIO_POWER_OFF 48 + +static void hp_t5325_power_off(void) +{ + gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1); +} + +static void __init hp_t5325_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(hp_t5325_mpp_config); + + kirkwood_uart0_init(); + spi_register_board_info(hp_t5325_spi_slave_info, + ARRAY_SIZE(hp_t5325_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + kirkwood_ge00_init(&hp_t5325_ge00_data); + kirkwood_sata_init(&hp_t5325_sata_data); + kirkwood_ehci_init(); + platform_device_register(&hp_t5325_button_device); + + if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0) + pm_power_off = hp_t5325_power_off; + else + pr_err("t5325: failed to configure power-off GPIO\n"); +} + +static int __init hp_t5325_pci_init(void) +{ + if (machine_is_t5325()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(hp_t5325_pci_init); + +MACHINE_START(T5325, "HP t5325 Thin Client") + /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = hp_t5325_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 2830f0fe80e0..a5bd7fde04a9 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -74,8 +74,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP3_SPI_MISO, MPP4_SATA1_ACTn, MPP5_SATA0_ACTn, - MPP8_TW_SDA, - MPP9_TW_SCK, + MPP8_TW0_SDA, + MPP9_TW0_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP13_UART1_TXD, /* PIC controller */ @@ -83,6 +83,7 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ 0 }; @@ -110,10 +111,10 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { - if (machine_is_ts219()) - kirkwood_pcie_init(); + if (machine_is_ts219()) + kirkwood_pcie_init(KW_PCIE0); - return 0; + return 0; } subsys_initcall(ts219_pci_init); diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index de49c2d9e74b..2e14afef07a2 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -2,7 +2,7 @@ * * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup * - * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2009-2010 Martin Michlmayr <tbm@cyrius.com> * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> * * This program is free software; you can redistribute it and/or @@ -17,6 +17,7 @@ #include <linux/i2c.h> #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> +#include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <asm/mach-types.h> @@ -26,6 +27,8 @@ #include "mpp.h" #include "tsx1x-common.h" +#define QNAP_TS41X_JUMPER_JP1 45 + static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), }; @@ -78,31 +81,31 @@ static unsigned int qnap_ts41x_mpp_config[] __initdata = { MPP3_SPI_MISO, MPP6_SYSRST_OUTn, MPP7_PEX_RST_OUTn, - MPP8_TW_SDA, - MPP9_TW_SCK, + MPP8_TW0_SDA, + MPP9_TW0_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP13_UART1_TXD, /* PIC controller */ MPP14_UART1_RXD, /* PIC controller */ MPP15_SATA0_ACTn, MPP16_SATA1_ACTn, - MPP20_GE1_0, - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, + MPP20_GE1_TXD0, + MPP21_GE1_TXD1, + MPP22_GE1_TXD2, + MPP23_GE1_TXD3, + MPP24_GE1_RXD0, + MPP25_GE1_RXD1, + MPP26_GE1_RXD2, + MPP27_GE1_RXD3, + MPP30_GE1_RXCTL, + MPP31_GE1_RXCLK, + MPP32_GE1_TCLKOUT, + MPP33_GE1_TXCTL, MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ MPP37_GPIO, /* Reset button */ MPP43_GPIO, /* USB Copy button */ MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */ - MPP45_GPIO, /* JP1: 0: console, 1: LCD */ + MPP45_GPIO, /* JP1: 0: LCD, 1: serial console */ MPP46_GPIO, /* External SATA HDD1 error indicator */ MPP47_GPIO, /* External SATA HDD2 error indicator */ MPP48_GPIO, /* External SATA HDD3 error indicator */ @@ -131,12 +134,14 @@ static void __init qnap_ts41x_init(void) pm_power_off = qnap_tsx1x_power_off; + if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0) + gpio_export(QNAP_TS41X_JUMPER_JP1, 0); } static int __init ts41x_pci_init(void) { if (machine_is_ts41x()) - kirkwood_pcie_init(); + kirkwood_pcie_init(KW_PCIE0); return 0; } diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index 78499667eb7b..5fcd082a17f9 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -268,8 +268,8 @@ static void __init ks8695_pci_preinit(void) __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC); /* hook in fault handlers */ - hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch"); - hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch"); + hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); + hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); } static void ks8695_show_pciregs(void) diff --git a/arch/arm/mach-l7200/Makefile b/arch/arm/mach-l7200/Makefile deleted file mode 100644 index 4bd8ebd70e7b..000000000000 --- a/arch/arm/mach-l7200/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := core.o -obj-m := -obj-n := -obj- := - diff --git a/arch/arm/mach-l7200/Makefile.boot b/arch/arm/mach-l7200/Makefile.boot deleted file mode 100644 index 6c72ecbe6b64..000000000000 --- a/arch/arm/mach-l7200/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0xf0008000 - diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c deleted file mode 100644 index 50d23246d4f0..000000000000 --- a/arch/arm/mach-l7200/core.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/arch/arm/mm/mm-lusl7200.c - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Extra MM routines for L7200 architecture - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/device.h> - -#include <asm/types.h> -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <asm/page.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -/* - * IRQ base register - */ -#define IRQ_BASE (IO_BASE_2 + 0x1000) - -/* - * Normal IRQ registers - */ -#define IRQ_STATUS (*(volatile unsigned long *) (IRQ_BASE + 0x000)) -#define IRQ_RAWSTATUS (*(volatile unsigned long *) (IRQ_BASE + 0x004)) -#define IRQ_ENABLE (*(volatile unsigned long *) (IRQ_BASE + 0x008)) -#define IRQ_ENABLECLEAR (*(volatile unsigned long *) (IRQ_BASE + 0x00c)) -#define IRQ_SOFT (*(volatile unsigned long *) (IRQ_BASE + 0x010)) -#define IRQ_SOURCESEL (*(volatile unsigned long *) (IRQ_BASE + 0x018)) - -/* - * Fast IRQ registers - */ -#define FIQ_STATUS (*(volatile unsigned long *) (IRQ_BASE + 0x100)) -#define FIQ_RAWSTATUS (*(volatile unsigned long *) (IRQ_BASE + 0x104)) -#define FIQ_ENABLE (*(volatile unsigned long *) (IRQ_BASE + 0x108)) -#define FIQ_ENABLECLEAR (*(volatile unsigned long *) (IRQ_BASE + 0x10c)) -#define FIQ_SOFT (*(volatile unsigned long *) (IRQ_BASE + 0x110)) -#define FIQ_SOURCESEL (*(volatile unsigned long *) (IRQ_BASE + 0x118)) - -static void l7200_mask_irq(unsigned int irq) -{ - IRQ_ENABLECLEAR = 1 << irq; -} - -static void l7200_unmask_irq(unsigned int irq) -{ - IRQ_ENABLE = 1 << irq; -} - -static struct irq_chip l7200_irq_chip = { - .ack = l7200_mask_irq, - .mask = l7200_mask_irq, - .unmask = l7200_unmask_irq -}; - -static void __init l7200_init_irq(void) -{ - int irq; - - IRQ_ENABLECLEAR = 0xffffffff; /* clear all interrupt enables */ - FIQ_ENABLECLEAR = 0xffffffff; /* clear all fast interrupt enables */ - - for (irq = 0; irq < NR_IRQS; irq++) { - set_irq_chip(irq, &l7200_irq_chip); - set_irq_flags(irq, IRQF_VALID); - set_irq_handler(irq, handle_level_irq); - } - - init_FIQ(); -} - -static struct map_desc l7200_io_desc[] __initdata = { - { IO_BASE, IO_START, IO_SIZE, MT_DEVICE }, - { IO_BASE_2, IO_START_2, IO_SIZE_2, MT_DEVICE }, - { AUX_BASE, AUX_START, AUX_SIZE, MT_DEVICE }, - { FLASH1_BASE, FLASH1_START, FLASH1_SIZE, MT_DEVICE }, - { FLASH2_BASE, FLASH2_START, FLASH2_SIZE, MT_DEVICE } -}; - -static void __init l7200_map_io(void) -{ - iotable_init(l7200_io_desc, ARRAY_SIZE(l7200_io_desc)); -} - -MACHINE_START(L7200, "LinkUp Systems L7200") - /* Maintainer: Steve Hill / Scott McConnell */ - .phys_io = 0x80040000, - .io_pg_offst = ((0xd0000000) >> 18) & 0xfffc, - .map_io = l7200_map_io, - .init_irq = l7200_init_irq, -MACHINE_END - diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h deleted file mode 100644 index 4671558cdd51..000000000000 --- a/arch/arm/mach-l7200/include/mach/aux_reg.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/aux_reg.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 08-02-2000 SJH Created file - */ -#ifndef _ASM_ARCH_AUXREG_H -#define _ASM_ARCH_AUXREG_H - -#include <mach/hardware.h> - -#define l7200aux_reg *((volatile unsigned int *) (AUX_BASE)) - -/* - * Auxillary register values - */ -#define AUX_CLEAR 0x00000000 -#define AUX_DIAG_LED_ON 0x00000002 -#define AUX_RTS_UART1 0x00000004 -#define AUX_DTR_UART1 0x00000008 -#define AUX_KBD_COLUMN_12_HIGH 0x00000010 -#define AUX_KBD_COLUMN_12_OFF 0x00000020 -#define AUX_KBD_COLUMN_13_HIGH 0x00000040 -#define AUX_KBD_COLUMN_13_OFF 0x00000080 - -#endif diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S deleted file mode 100644 index b69ed344c7c9..000000000000 --- a/arch/arm/mach-l7200/include/mach/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-l7200/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .equ io_virt, IO_BASE - .equ io_phys, IO_START - - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #io_phys @ physical base address - movne \rx, #io_virt @ virtual address - add \rx, \rx, #0x00044000 @ UART1 -@ add \rx, \rx, #0x00045000 @ UART2 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S deleted file mode 100644 index 1726d91fc1d3..000000000000 --- a/arch/arm/mach-l7200/include/mach/entry-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for L7200-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/hardware.h> - - .equ irq_base_addr, IO_BASE_2 - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqstat, #irq_base_addr @ Virt addr IRQ regs - add \irqstat, \irqstat, #0x00001000 @ Status reg - ldr \irqstat, [\irqstat, #0] @ get interrupts - mov \irqnr, #0 -1001: tst \irqstat, #1 - addeq \irqnr, \irqnr, #1 - moveq \irqstat, \irqstat, lsr #1 - tsteq \irqnr, #32 - beq 1001b - teq \irqnr, #32 - .endm - diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h deleted file mode 100644 index 2b7086a26b81..000000000000 --- a/arch/arm/mach-l7200/include/mach/gp_timers.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/gp_timers.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 07-28-2000 SJH Created file - * 08-02-2000 SJH Used structure for registers - */ -#ifndef _ASM_ARCH_GPTIMERS_H -#define _ASM_ARCH_GPTIMERS_H - -#include <mach/hardware.h> - -/* - * Layout of L7200 general purpose timer registers - */ -struct GPT_Regs { - unsigned int TIMERLOAD; - unsigned int TIMERVALUE; - unsigned int TIMERCONTROL; - unsigned int TIMERCLEAR; -}; - -#define GPT_BASE (IO_BASE_2 + 0x3000) -#define l7200_timer1_regs ((volatile struct GPT_Regs *) (GPT_BASE)) -#define l7200_timer2_regs ((volatile struct GPT_Regs *) (GPT_BASE + 0x20)) - -/* - * General register values - */ -#define GPT_PRESCALE_1 0x00000000 -#define GPT_PRESCALE_16 0x00000004 -#define GPT_PRESCALE_256 0x00000008 -#define GPT_MODE_FREERUN 0x00000000 -#define GPT_MODE_PERIODIC 0x00000040 -#define GPT_ENABLE 0x00000080 -#define GPT_BZTOG 0x00000100 -#define GPT_BZMOD 0x00000200 -#define GPT_LOAD_MASK 0x0000ffff - -#endif diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h deleted file mode 100644 index c7b0a5d7b8bb..000000000000 --- a/arch/arm/mach-l7200/include/mach/gpio.h +++ /dev/null @@ -1,105 +0,0 @@ -/****************************************************************************/ -/* - * arch/arm/mach-l7200/include/mach/gpio.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * GPIO. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define GPIO_OFF 0x00005000 /* Offset from IO_START to the GPIO reg's. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */ -#define GPIO_BASE (IO_BASE_2 + GPIO_OFF) /* Virtual addr of the GPIO reg. */ - -/* Offsets from the start of the GPIO for all the registers. */ -#define PADR_OFF 0x000 -#define PADDR_OFF 0x004 -#define PASBSR_OFF 0x008 -#define PAEENR_OFF 0x00c -#define PAESNR_OFF 0x010 -#define PAESTR_OFF 0x014 -#define PAIMR_OFF 0x018 -#define PAINT_OFF 0x01c - -#define PBDR_OFF 0x020 -#define PBDDR_OFF 0x024 -#define PBSBSR_OFF 0x028 -#define PBIMR_OFF 0x038 -#define PBINT_OFF 0x03c - -#define PCDR_OFF 0x040 -#define PCDDR_OFF 0x044 -#define PCSBSR_OFF 0x048 -#define PCIMR_OFF 0x058 -#define PCINT_OFF 0x05c - -#define PDDR_OFF 0x060 -#define PDDDR_OFF 0x064 -#define PDSBSR_OFF 0x068 -#define PDEENR_OFF 0x06c -#define PDESNR_OFF 0x070 -#define PDESTR_OFF 0x074 -#define PDIMR_OFF 0x078 -#define PDINT_OFF 0x07c - -#define PEDR_OFF 0x080 -#define PEDDR_OFF 0x084 -#define PESBSR_OFF 0x088 -#define PEEENR_OFF 0x08c -#define PEESNR_OFF 0x090 -#define PEESTR_OFF 0x094 -#define PEIMR_OFF 0x098 -#define PEINT_OFF 0x09c - -/* Define the GPIO registers for use by device drivers and the kernel. */ -#define PADR (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF)) -#define PADDR (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF)) -#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF)) -#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF)) -#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF)) -#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF)) -#define PAIMR (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF)) -#define PAINT (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF)) - -#define PBDR (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF)) -#define PBDDR (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF)) -#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF)) -#define PBIMR (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF)) -#define PBINT (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF)) - -#define PCDR (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF)) -#define PCDDR (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF)) -#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF)) -#define PCIMR (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF)) -#define PCINT (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF)) - -#define PDDR (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF)) -#define PDDDR (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF)) -#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF)) -#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF)) -#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF)) -#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF)) -#define PDIMR (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF)) -#define PDINT (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF)) - -#define PEDR (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF)) -#define PEDDR (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF)) -#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF)) -#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF)) -#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF)) -#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF)) -#define PEIMR (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF)) -#define PEINT (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF)) - -#define VEE_EN 0x02 -#define BACKLIGHT_EN 0x04 diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h deleted file mode 100644 index c31909cfc254..000000000000 --- a/arch/arm/mach-l7200/include/mach/hardware.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/hardware.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * This file contains the hardware definitions for the - * LinkUp Systems L7200 SOC development board. - * - * Changelog: - * 02-01-2000 RS Created L7200 version, derived from rpc code - * 03-21-2000 SJH Cleaned up file - * 04-21-2000 RS Changed mapping of I/O in virtual space - * 04-25-2000 SJH Removed unused symbols and such - * 05-05-2000 SJH Complete rewrite - * 07-31-2000 SJH Added undocumented debug auxillary port to - * get at last two columns for keyboard driver - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ -#define RAM_START 0xf0000000 -#define RAM_SIZE 0x02000000 -#define RAM_BASE 0xc0000000 - -#define IO_START 0x80000000 /* I/O */ -#define IO_SIZE 0x01000000 -#define IO_BASE 0xd0000000 - -#define IO_START_2 0x90000000 /* I/O */ -#define IO_SIZE_2 0x01000000 -#define IO_BASE_2 0xd1000000 - -#define AUX_START 0x1a000000 /* AUX PORT */ -#define AUX_SIZE 0x01000000 -#define AUX_BASE 0xd2000000 - -#define FLASH1_START 0x00000000 /* FLASH BANK 1 */ -#define FLASH1_SIZE 0x01000000 -#define FLASH1_BASE 0xd3000000 - -#define FLASH2_START 0x10000000 /* FLASH BANK 2 */ -#define FLASH2_SIZE 0x01000000 -#define FLASH2_BASE 0xd4000000 - -#define ISA_START 0x20000000 /* ISA */ -#define ISA_SIZE 0x20000000 -#define ISA_BASE 0xe0000000 - -#define PCIO_BASE IO_BASE - -#endif diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h deleted file mode 100644 index a770a89fb708..000000000000 --- a/arch/arm/mach-l7200/include/mach/io.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/io.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 03-21-2000 SJH Created from arch/arm/mach-nexuspci/include/mach/io.h - * 08-31-2000 SJH Added in IO functions necessary for new drivers - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * There are not real ISA nor PCI buses, so we fake it. - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h deleted file mode 100644 index 7edffd713c5b..000000000000 --- a/arch/arm/mach-l7200/include/mach/irqs.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/irqs.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 01-02-2000 RS Create l7200 version - * 03-28-2000 SJH Removed unused interrupt - * 07-28-2000 SJH Added pseudo-keyboard interrupt - */ - -/* - * NOTE: The second timer (Timer 2) is used as the keyboard - * interrupt when the keyboard driver is enabled. - */ - -#define NR_IRQS 32 - -#define IRQ_STWDOG 0 /* Watchdog timer */ -#define IRQ_PROG 1 /* Programmable interrupt */ -#define IRQ_DEBUG_RX 2 /* Comm Rx debug */ -#define IRQ_DEBUG_TX 3 /* Comm Tx debug */ -#define IRQ_GCTC1 4 /* Timer 1 */ -#define IRQ_GCTC2 5 /* Timer 2 / Keyboard */ -#define IRQ_DMA 6 /* DMA controller */ -#define IRQ_CLCD 7 /* Color LCD controller */ -#define IRQ_SM_RX 8 /* Smart card */ -#define IRQ_SM_TX 9 /* Smart cart */ -#define IRQ_SM_RST 10 /* Smart card */ -#define IRQ_SIB 11 /* Serial Interface Bus */ -#define IRQ_MMC 12 /* MultiMediaCard */ -#define IRQ_SSP1 13 /* Synchronous Serial Port 1 */ -#define IRQ_SSP2 14 /* Synchronous Serial Port 1 */ -#define IRQ_SPI 15 /* SPI slave */ -#define IRQ_UART_1 16 /* UART 1 */ -#define IRQ_UART_2 17 /* UART 2 */ -#define IRQ_IRDA 18 /* IRDA */ -#define IRQ_RTC_TICK 19 /* Real Time Clock tick */ -#define IRQ_RTC_ALARM 20 /* Real Time Clock alarm */ -#define IRQ_GPIO 21 /* General Purpose IO */ -#define IRQ_GPIO_DMA 22 /* General Purpose IO, DMA */ -#define IRQ_M2M 23 /* Memory to memory DMA */ -#define IRQ_RESERVED 24 /* RESERVED, don't use */ -#define IRQ_INTF 25 /* External active low interrupt */ -#define IRQ_INT0 26 /* External active low interrupt */ -#define IRQ_INT1 27 /* External active low interrupt */ -#define IRQ_INT2 28 /* External active low interrupt */ -#define IRQ_UCB1200 29 /* Interrupt generated by UCB1200*/ -#define IRQ_BAT_LO 30 /* Low batery or external power */ -#define IRQ_MEDIA_CHG 31 /* Media change interrupt */ - -/* - * This is the offset of the FIQ "IRQ" numbers - */ -#define FIQ_START 64 diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h deleted file mode 100644 index 9fb40ed2f03b..000000000000 --- a/arch/arm/mach-l7200/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/memory.h - * - * Copyright (c) 2000 Steve Hill (sjhill@cotw.com) - * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net) - * - * Changelog: - * 03-13-2000 SJH Created - * 04-13-2000 RS Changed bus macros for new addr - * 05-03-2000 SJH Removed bus macros and fixed virt_to_phys macro - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset on the L7200 SDB. - */ -#define PHYS_OFFSET UL(0xf0000000) - -/* - * Cache flushing area - ROM - */ -#define FLUSH_BASE_PHYS 0x40000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h deleted file mode 100644 index 3959871e8361..000000000000 --- a/arch/arm/mach-l7200/include/mach/pmpcon.h +++ /dev/null @@ -1,46 +0,0 @@ -/****************************************************************************/ -/* - * arch/arm/mach-l7200/include/mach/pmpcon.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * DC/DC converter register. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define PMPCON_OFF 0x00006000 /* Offset from IO_START_2. */ - -/* IO_START_2 and IO_BASE_2 are defined in hardware.h */ - -#define PMPCON_START (IO_START_2 + PMPCON_OFF) /* Physical address of reg. */ -#define PMPCON_BASE (IO_BASE_2 + PMPCON_OFF) /* Virtual address of reg. */ - - -#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE)) - -#define PWM2_50CYCLE 0x800 -#define CONTRAST 0x9 - -#define PWM1H (CONTRAST) -#define PWM1L (CONTRAST << 4) - -#define PMPCON_VALUE (PWM2_50CYCLE | PWM1L | PWM1H) - -/* PMPCON = 0x811; // too light and fuzzy - * PMPCON = 0x844; - * PMPCON = 0x866; // better color poor depth - * PMPCON = 0x888; // Darker but better depth - * PMPCON = 0x899; // Darker even better depth - * PMPCON = 0x8aa; // too dark even better depth - * PMPCON = 0X8cc; // Way too dark - */ - -/* As CONTRAST value increases the greater the depth perception and - * the darker the colors. - */ diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h deleted file mode 100644 index a2da7aedf208..000000000000 --- a/arch/arm/mach-l7200/include/mach/pmu.h +++ /dev/null @@ -1,125 +0,0 @@ -/****************************************************************************/ -/* - * arch/arm/mach-l7200/include/mach/pmu.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * Power Management Unit (PMU). - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */ -#define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */ - - -/* Define the PMU registers for use by device drivers and the kernel. */ - -typedef struct { - unsigned int CURRENT; /* Current configuration register */ - unsigned int NEXT; /* Next configuration register */ - unsigned int reserved; - unsigned int RUN; /* Run configuration register */ - unsigned int COMM; /* Configuration command register */ - unsigned int SDRAM; /* SDRAM configuration bypass register */ -} pmu_interface; - -#define PMU ((volatile pmu_interface *)(PMU_BASE)) - - -/* Macro's for reading the common register fields. */ - -#define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */ -#define GET_OSCEN(reg) ((reg >> 16) & 0x01) -#define GET_OSCMUX(reg) ((reg >> 15) & 0x01) -#define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */ -#define GET_PLLEN(reg) ((reg >> 8) & 0x01) -#define GET_PLLMUX(reg) ((reg >> 7) & 0x01) -#define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */ -#define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01) -#define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01) -#define GET_FASTBUS(reg) (reg & 0x1) - -/* CFG_NEXT register */ - -#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */ -#define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01) -#define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01) -#define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01) - -/* Useful field values that can be used to construct the - * CFG_NEXT and CFG_RUN registers. - */ - -#define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */ -#define NOCHANGE_STALL 1<<25 -#define CHANGE_NOSTALL 2<<25 -#define CHANGE_STALL 3<<25 - -#define INTRET 1<<17 -#define OSCEN 1<<16 -#define OSCMUX 1<<15 - -/* PLL frequencies */ - -#define PLLMUL_0 0<<9 /* 3.6864 MHz */ -#define PLLMUL_1 1<<9 /* ?????? MHz */ -#define PLLMUL_5 5<<9 /* 18.432 MHz */ -#define PLLMUL_10 10<<9 /* 36.864 MHz */ -#define PLLMUL_18 18<<9 /* ?????? MHz */ -#define PLLMUL_20 20<<9 /* 73.728 MHz */ -#define PLLMUL_32 32<<9 /* ?????? MHz */ -#define PLLMUL_35 35<<9 /* 129.024 MHz */ -#define PLLMUL_36 36<<9 /* ?????? MHz */ -#define PLLMUL_39 39<<9 /* ?????? MHz */ -#define PLLMUL_40 40<<9 /* 147.456 MHz */ - -/* Clock recovery times */ - -#define CRCLOCK_1 1<<18 -#define CRCLOCK_2 2<<18 -#define CRCLOCK_4 4<<18 -#define CRCLOCK_8 8<<18 -#define CRCLOCK_16 16<<18 -#define CRCLOCK_32 32<<18 -#define CRCLOCK_63 63<<18 -#define CRCLOCK_127 127<<18 - -#define PLLEN 1<<8 -#define PLLMUX 1<<7 -#define SDR_STOP 1<<6 -#define SYSCLKEN 1<<5 - -#define BCLK_DIV_4 2<<3 -#define BCLK_DIV_2 1<<3 -#define BCLK_DIV_1 0<<3 - -#define SDRB_SEL 1<<2 -#define SDRF_SEL 1<<1 -#define FASTBUS 1<<0 - - -/* CFG_SDRAM */ - -#define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */ -#define SDRREFACK 1<<1 /* Read-only */ -#define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */ -#define SDRSTOPACK 1<<3 /* Read-only */ -#define PICEN 1<<4 /* Enable Co-procesor */ -#define PICTEST 1<<5 - -#define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01) -#define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */ -#define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01) -#define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */ -#define GET_PICEN ((PMU->SDRAM >> 4) & 0x01) -#define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01) diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h deleted file mode 100644 index adc05e5f8378..000000000000 --- a/arch/arm/mach-l7200/include/mach/serial.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/serial.h - * - * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 03-20-2000 SJH Created - * 03-26-2000 SJH Added flags for serial ports - * 03-27-2000 SJH Corrected BASE_BAUD value - * 04-14-2000 RS Made register addr dependent on IO_BASE - * 05-03-2000 SJH Complete rewrite - * 05-09-2000 SJH Stripped out architecture specific serial stuff - * and placed it in a separate file - * 07-28-2000 SJH Moved base baud rate variable - */ -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -/* - * This assumes you have a 3.6864 MHz clock for your UART. - */ -#define BASE_BAUD 3686400 - -/* - * Standard COM flags - */ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -#define STD_SERIAL_PORT_DEFNS \ - /* MAGIC UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS }, /* ttyLU0 */ \ - { 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS }, /* ttyLU1 */ \ - -#define EXTRA_SERIAL_PORT_DEFNS - -#endif diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h deleted file mode 100644 index 645f1c5e568d..000000000000 --- a/arch/arm/mach-l7200/include/mach/serial_l7200.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/serial_l7200.h - * - * Copyright (c) 2000 Steven Hill (sjhill@cotw.com) - * - * Changelog: - * 05-09-2000 SJH Created - */ -#ifndef __ASM_ARCH_SERIAL_L7200_H -#define __ASM_ARCH_SERIAL_L7200_H - -#include <mach/memory.h> - -/* - * This assumes you have a 3.6864 MHz clock for your UART. - */ -#define BASE_BAUD 3686400 - -/* - * UART base register addresses - */ -#define UART1_BASE (IO_BASE + 0x00044000) -#define UART2_BASE (IO_BASE + 0x00045000) - -/* - * UART register offsets - */ -#define UARTDR 0x00 /* Tx/Rx data */ -#define RXSTAT 0x04 /* Rx status */ -#define H_UBRLCR 0x08 /* mode register high */ -#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/ -#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/ -#define UARTCON 0x14 /* control register */ -#define UARTFLG 0x18 /* flag register */ -#define UARTINTSTAT 0x1C /* FIFO IRQ status register */ -#define UARTINTMASK 0x20 /* FIFO IRQ mask register */ - -/* - * UART baud rate register values - */ -#define BR_110 0x827 -#define BR_1200 0x06e -#define BR_2400 0x05f -#define BR_4800 0x02f -#define BR_9600 0x017 -#define BR_14400 0x00f -#define BR_19200 0x00b -#define BR_38400 0x005 -#define BR_57600 0x003 -#define BR_76800 0x002 -#define BR_115200 0x001 - -/* - * Receiver status register (RXSTAT) mask values - */ -#define RXSTAT_NO_ERR 0x00 /* No error */ -#define RXSTAT_FRM_ERR 0x01 /* Framing error */ -#define RXSTAT_PAR_ERR 0x02 /* Parity error */ -#define RXSTAT_OVR_ERR 0x04 /* Overrun error */ - -/* - * High byte of UART bit rate and line control register (H_UBRLCR) values - */ -#define UBRLCR_BRK 0x01 /* generate break on tx */ -#define UBRLCR_PEN 0x02 /* enable parity */ -#define UBRLCR_PDIS 0x00 /* disable parity */ -#define UBRLCR_EVEN 0x04 /* 1= even parity,0 = odd parity */ -#define UBRLCR_STP2 0x08 /* transmit 2 stop bits */ -#define UBRLCR_FIFO 0x10 /* enable FIFO */ -#define UBRLCR_LEN5 0x60 /* word length5 */ -#define UBRLCR_LEN6 0x40 /* word length6 */ -#define UBRLCR_LEN7 0x20 /* word length7 */ -#define UBRLCR_LEN8 0x00 /* word length8 */ - -/* - * UART control register (UARTCON) values - */ -#define UARTCON_UARTEN 0x01 /* Enable UART */ -#define UARTCON_DMAONERR 0x08 /* Mask RxDmaRq when errors occur */ - -/* - * UART flag register (UARTFLG) mask values - */ -#define UARTFLG_UTXFF 0x20 /* Transmit FIFO full */ -#define UARTFLG_URXFE 0x10 /* Receiver FIFO empty */ -#define UARTFLG_UBUSY 0x08 /* Transmitter busy */ -#define UARTFLG_DCD 0x04 /* Data carrier detect */ -#define UARTFLG_DSR 0x02 /* Data set ready */ -#define UARTFLG_CTS 0x01 /* Clear to send */ - -/* - * UART interrupt status/clear registers (UARTINTSTAT/CLR) values - */ -#define UART_TXINT 0x01 /* TX interrupt */ -#define UART_RXINT 0x02 /* RX interrupt */ -#define UART_RXERRINT 0x04 /* RX error interrupt */ -#define UART_MSINT 0x08 /* Modem Status interrupt */ -#define UART_UDINT 0x10 /* UART Disabled interrupt */ -#define UART_ALLIRQS 0x1f /* All interrupts */ - -#endif diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h deleted file mode 100644 index 965728712cf3..000000000000 --- a/arch/arm/mach-l7200/include/mach/sib.h +++ /dev/null @@ -1,119 +0,0 @@ -/****************************************************************************/ -/* - * arch/arm/mach-l7200/include/mach/sib.h - * - * Registers and helper functions for the Serial Interface Bus. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define SIB_OFF 0x00040000 /* Offset from IO_START to the SIB reg's. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */ -#define SIB_BASE (IO_BASE + SIB_OFF) /* Virtual addr of the SIB reg. */ - -/* Offsets from the start of the SIB for all the registers. */ - -/* Define the SIB registers for use by device drivers and the kernel. */ - -typedef struct -{ - unsigned int MCCR; /* SIB Control Register Offset: 0x00 */ - unsigned int RES1; /* Reserved Offset: 0x04 */ - unsigned int MCDR0; /* SIB Data Register 0 Offset: 0x08 */ - unsigned int MCDR1; /* SIB Data Register 1 Offset: 0x0c */ - unsigned int MCDR2; /* SIB Data Register 2 (UCB1x00) Offset: 0x10 */ - unsigned int RES2; /* Reserved Offset: 0x14 */ - unsigned int MCSR; /* SIB Status Register Offset: 0x18 */ -} SIB_Interface; - -#define SIB ((volatile SIB_Interface *) (SIB_BASE)) - -/* MCCR */ - -#define INTERNAL_FREQ 9216000 /* Hertz */ -#define AUDIO_FREQ 5000 /* Hertz */ -#define TELECOM_FREQ 5000 /* Hertz */ - -#define AUDIO_DIVIDE (INTERNAL_FREQ / (32 * AUDIO_FREQ)) -#define TELECOM_DIVIDE (INTERNAL_FREQ / (32 * TELECOM_FREQ)) - -#define MCCR_ASD57 AUDIO_DIVIDE -#define MCCR_TSD57 (TELECOM_DIVIDE << 8) -#define MCCR_MCE (1 << 16) /* SIB enable */ -#define MCCR_ECS (1 << 17) /* External Clock Select */ -#define MCCR_ADM (1 << 18) /* A/D Data Sampling */ -#define MCCR_PMC (1 << 26) /* PIN Multiplexer Control */ - - -#define GET_ASD ((SIB->MCCR >> 0) & 0x3f) /* Audio Sample Rate Div. */ -#define GET_TSD ((SIB->MCCR >> 8) & 0x3f) /* Telcom Sample Rate Div. */ -#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */ -#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */ -#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */ -#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ -#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */ -#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ -#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */ -#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */ -#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */ -#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */ -#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */ -#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */ - -/* MCDR0 */ - -#define AUDIO_RECV ((SIB->MCDR0 >> 4) & 0xfff) -#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4)) - -/* MCDR1 */ - -#define TELECOM_RECV ((SIB->MCDR1 >> 2) & 032fff) -#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2)) - - -/* MCSR */ - -#define MCSR_ATU (1 << 4) /* Audio Transmit FIFO Underrun */ -#define MCSR_ARO (1 << 5) /* Audio Receive FIFO Underrun */ -#define MCSR_TTU (1 << 6) /* TELECOM Transmit FIFO Underrun */ -#define MCSR_TRO (1 << 7) /* TELECOM Receive FIFO Underrun */ - -#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO) - - -#define GET_ATS ((SIB->MCSR >> 0) & 0x01) /* Audio Transmit FIFO Service Req*/ -#define GET_ARS ((SIB->MCSR >> 1) & 0x01) /* Audio Recv FIFO Service Request*/ -#define GET_TTS ((SIB->MCSR >> 2) & 0x01) /* TELECOM Transmit FIFO Flag */ -#define GET_TRS ((SIB->MCSR >> 3) & 0x01) /* TELECOM Recv FIFO Service Req. */ -#define GET_ATU ((SIB->MCSR >> 4) & 0x01) /* Audio Transmit FIFO Underrun */ -#define GET_ARO ((SIB->MCSR >> 5) & 0x01) /* Audio Receive FIFO Underrun */ -#define GET_TTU ((SIB->MCSR >> 6) & 0x01) /* TELECOM Transmit FIFO Underrun */ -#define GET_TRO ((SIB->MCSR >> 7) & 0x01) /* TELECOM Receive FIFO Underrun */ -#define GET_ANF ((SIB->MCSR >> 8) & 0x01) /* Audio Transmit FIFO not full */ -#define GET_ANE ((SIB->MCSR >> 9) & 0x01) /* Audio Receive FIFO not empty */ -#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */ -#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */ -#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */ -#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */ -#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */ -#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */ - -/* MCDR2 */ - -#define MCDR2_rW (1 << 16) - -#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff))) -#define MCDR2_WRITE_COMPLETE GET_CWC - -#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17)) -#define MCDR2_READ_COMPLETE GET_CRC -#define MCDR2_READ (SIB->MCDR2 & 0xffff) diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h deleted file mode 100644 index e9729a35751d..000000000000 --- a/arch/arm/mach-l7200/include/mach/sys-clock.h +++ /dev/null @@ -1,67 +0,0 @@ -/****************************************************************************/ -/* - * arch/arm/mach-l7200/include/mach/sys-clock.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * System clocks. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define SYS_CLOCK_OFF 0x00050030 /* Offset from IO_START. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */ -#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */ - -/* Define the interface to the SYS_CLOCK */ - -typedef struct -{ - unsigned int ENABLE; - unsigned int ESYNC; - unsigned int SELECT; -} sys_clock_interface; - -#define SYS_CLOCK ((volatile sys_clock_interface *)(SYS_CLOCK_BASE)) - -//#define CLOCK_EN (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF)) -//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF)) -//#define CLOCK_SEL (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF)) - -/* SYS_CLOCK -> ENABLE */ - -#define SYN_EN 1<<0 -#define B18M_EN 1<<1 -#define CLK3M6_EN 1<<2 -#define BUART_EN 1<<3 -#define CLK18MU_EN 1<<4 -#define FIR_EN 1<<5 -#define MIRN_EN 1<<6 -#define UARTM_EN 1<<7 -#define SIBADC_EN 1<<8 -#define ALTD_EN 1<<9 -#define CLCLK_EN 1<<10 - -/* SYS_CLOCK -> SELECT */ - -#define CLK18M_DIV 1<<0 -#define MIR_SEL 1<<1 -#define SSP_SEL 1<<4 -#define MM_DIV 1<<5 -#define MM_SEL 1<<6 -#define ADC_SEL_2 0<<7 -#define ADC_SEL_4 1<<7 -#define ADC_SEL_8 3<<7 -#define ADC_SEL_16 7<<7 -#define ADC_SEL_32 0x0f<<7 -#define ADC_SEL_64 0x1f<<7 -#define ADC_SEL_128 0x3f<<7 -#define ALTD_SEL 1<<13 diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h deleted file mode 100644 index e0dd3b6ae4aa..000000000000 --- a/arch/arm/mach-l7200/include/mach/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/system.h - * - * Copyright (c) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog - * 03-21-2000 SJH Created - * 04-26-2000 SJH Fixed functions - * 05-03-2000 SJH Removed usage of obsolete 'iomd.h' - * 05-31-2000 SJH Properly implemented 'arch_idle' - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/hardware.h> - -static inline void arch_idle(void) -{ - *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */ -} - -static inline void arch_reset(char mode, const char *cmd) -{ - if (mode == 's') { - cpu_reset(0); - } -} - -#endif diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h deleted file mode 100644 index 061771c2c2bd..000000000000 --- a/arch/arm/mach-l7200/include/mach/time.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/time.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 01-02-2000 RS Created l7200 version, derived from rpc code - * 05-03-2000 SJH Complete rewrite - */ -#ifndef _ASM_ARCH_TIME_H -#define _ASM_ARCH_TIME_H - -#include <mach/irqs.h> - -/* - * RTC base register address - */ -#define RTC_BASE (IO_BASE_2 + 0x2000) - -/* - * RTC registers - */ -#define RTC_RTCDR (*(volatile unsigned char *) (RTC_BASE + 0x000)) -#define RTC_RTCMR (*(volatile unsigned char *) (RTC_BASE + 0x004)) -#define RTC_RTCS (*(volatile unsigned char *) (RTC_BASE + 0x008)) -#define RTC_RTCC (*(volatile unsigned char *) (RTC_BASE + 0x008)) -#define RTC_RTCDV (*(volatile unsigned char *) (RTC_BASE + 0x00c)) -#define RTC_RTCCR (*(volatile unsigned char *) (RTC_BASE + 0x010)) - -/* - * RTCCR register values - */ -#define RTC_RATE_32 0x00 /* 32 Hz tick */ -#define RTC_RATE_64 0x10 /* 64 Hz tick */ -#define RTC_RATE_128 0x20 /* 128 Hz tick */ -#define RTC_RATE_256 0x30 /* 256 Hz tick */ -#define RTC_EN_ALARM 0x01 /* Enable alarm */ -#define RTC_EN_TIC 0x04 /* Enable counter */ -#define RTC_EN_STWDOG 0x08 /* Enable watchdog */ - -/* - * Handler for RTC timer interrupt - */ -static irqreturn_t -timer_interrupt(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(regs)); -#endif - do_profile(regs); - RTC_RTCC = 0; /* Clear interrupt */ - - return IRQ_HANDLED; -} - -/* - * Set up RTC timer interrupt, and return the current time in seconds. - */ -void __init time_init(void) -{ - RTC_RTCC = 0; /* Clear interrupt */ - - timer_irq.handler = timer_interrupt; - - setup_irq(IRQ_RTC_TICK, &timer_irq); - - RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC; /* Set rate and enable timer */ -} - -#endif diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h deleted file mode 100644 index ffc96a63b5a2..000000000000 --- a/arch/arm/mach-l7200/include/mach/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/timex.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * 04-21-2000 RS Created file - * 05-03-2000 SJH Tick rate was wrong - * - */ - -/* - * On the ARM720T, clock ticks are set to 128 Hz. - * - * NOTE: The actual RTC value is set in 'time.h' which - * must be changed when choosing a different tick - * rate. The value of HZ in 'param.h' must also - * be changed to match below. - */ -#define CLOCK_TICK_RATE 128 diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h deleted file mode 100644 index 591c962bb315..000000000000 --- a/arch/arm/mach-l7200/include/mach/uncompress.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/uncompress.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 05-01-2000 SJH Created - * 05-13-2000 SJH Filled in function bodies - * 07-26-2000 SJH Removed hard coded baud rate - */ - -#include <mach/hardware.h> - -#define IO_UART IO_START + 0x00044000 - -#define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v)) -#define __raw_readb(p) (*(volatile unsigned char *)(p)) - -static inline void putc(int c) -{ - while(__raw_readb(IO_UART + 0x18) & 0x20 || - __raw_readb(IO_UART + 0x18) & 0x08) - barrier(); - - __raw_writeb(c, IO_UART + 0x00); -} - -static inline void flush(void) -{ -} - -static __inline__ void arch_decomp_setup(void) -{ - __raw_writeb(0x00, IO_UART + 0x08); /* Set HSB */ - __raw_writeb(0x00, IO_UART + 0x20); /* Disable IRQs */ - __raw_writeb(0x01, IO_UART + 0x14); /* Enable UART */ -} - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h deleted file mode 100644 index 85f0abbf15f1..000000000000 --- a/arch/arm/mach-l7200/include/mach/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * arch/arm/mach-l7200/include/mach/vmalloc.h - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h index 189d20e543e7..edb8f5faf5d5 100644 --- a/arch/arm/mach-lh7a40x/include/mach/memory.h +++ b/arch/arm/mach-lh7a40x/include/mach/memory.h @@ -19,50 +19,6 @@ */ #define PHYS_OFFSET UL(0xc0000000) -#ifdef CONFIG_DISCONTIGMEM - -/* - * Given a kernel address, find the home node of the underlying memory. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define KVADDR_TO_NID(addr) \ - ( ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) & 1)\ - | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1)) -# else /* 2 banks per node */ -# define KVADDR_TO_NID(addr) \ - (((unsigned long) (addr) - PAGE_OFFSET) >> 26) -# endif - -/* - * Given a page frame number, convert it to a node id. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define PFN_TO_NID(pfn) \ - (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) & 1)\ - | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1)) -# else /* 2 banks per node */ -# define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT)) -#endif - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT) -# else /* 2 banks per node */ -# define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT) -# endif - -#endif - /* * Sparsemem version of the above */ diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig new file mode 100644 index 000000000000..fde663508696 --- /dev/null +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -0,0 +1,33 @@ +if ARCH_LPC32XX + +menu "Individual UART enable selections" + +config ARCH_LPC32XX_UART3_SELECT + bool "Add support for standard UART3" + help + Adds support for standard UART 3 when the 8250 serial support + is enabled. + +config ARCH_LPC32XX_UART4_SELECT + bool "Add support for standard UART4" + help + Adds support for standard UART 4 when the 8250 serial support + is enabled. + +config ARCH_LPC32XX_UART5_SELECT + bool "Add support for standard UART5" + default y + help + Adds support for standard UART 5 when the 8250 serial support + is enabled. + +config ARCH_LPC32XX_UART6_SELECT + bool "Add support for standard UART6" + help + Adds support for standard UART 6 when the 8250 serial support + is enabled. + +endmenu + +endif + diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile new file mode 100644 index 000000000000..a5fc5d0eeaeb --- /dev/null +++ b/arch/arm/mach-lpc32xx/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := timer.o irq.o common.o serial.o clock.o +obj-y += gpiolib.o pm.o suspend.o +obj-y += phy3250.o + diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot new file mode 100644 index 000000000000..b796b41ebf8f --- /dev/null +++ b/arch/arm/mach-lpc32xx/Makefile.boot @@ -0,0 +1,4 @@ + zreladdr-y := 0x80008000 +params_phys-y := 0x80000100 +initrd_phys-y := 0x82000000 + diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c new file mode 100644 index 000000000000..32d63796430a --- /dev/null +++ b/arch/arm/mach-lpc32xx/clock.c @@ -0,0 +1,1137 @@ +/* + * arch/arm/mach-lpc32xx/clock.c + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * LPC32xx clock management driver overview + * + * The LPC32XX contains a number of high level system clocks that can be + * generated from different sources. These system clocks are used to + * generate the CPU and bus rates and the individual peripheral clocks in + * the system. When Linux is started by the boot loader, the system + * clocks are already running. Stopping a system clock during normal + * Linux operation should never be attempted, as peripherals that require + * those clocks will quit working (ie, DRAM). + * + * The LPC32xx high level clock tree looks as follows. Clocks marked with + * an asterisk are always on and cannot be disabled. Clocks marked with + * an ampersand can only be disabled in CPU suspend mode. Clocks marked + * with a caret are always on if it is the selected clock for the SYSCLK + * source. The clock that isn't used for SYSCLK can be enabled and + * disabled normally. + * 32KHz oscillator* + * / | \ + * RTC* PLL397^ TOUCH + * / + * Main oscillator^ / + * | \ / + * | SYSCLK& + * | \ + * | \ + * USB_PLL HCLK_PLL& + * | | | + * USB host/device PCLK& | + * | | + * Peripherals + * + * The CPU and chip bus rates are derived from the HCLK PLL, which can + * generate various clock rates up to 266MHz and beyond. The internal bus + * rates (PCLK and HCLK) are generated from dividers based on the HCLK + * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate, + * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high + * level clocks are based on either HCLK or PCLK, but have their own + * dividers as part of the IP itself. Because of this, the system clock + * rates should not be changed. + * + * The HCLK PLL is clocked from SYSCLK, which can be derived from the + * main oscillator or PLL397. PLL397 generates a rate that is 397 times + * the 32KHz oscillator rate. The main oscillator runs at the selected + * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate + * is normally 13MHz, but depends on the selection of external crystals + * or oscillators. If USB operation is required, the main oscillator must + * be used in the system. + * + * Switching SYSCLK between sources during normal Linux operation is not + * supported. SYSCLK is preset in the bootloader. Because of the + * complexities of clock management during clock frequency changes, + * there are some limitations to the clock driver explained below: + * - The PLL397 and main oscillator can be enabled and disabled by the + * clk_enable() and clk_disable() functions unless SYSCLK is based + * on that clock. This allows the other oscillator that isn't driving + * the HCLK PLL to be used as another system clock that can be routed + * to an external pin. + * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with + * this driver. + * - HCLK and PCLK rates cannot be changed as part of this driver. + * - Most peripherals have their own dividers are part of the peripheral + * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates + * will also impact the individual peripheral rates. + */ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> + +#include <mach/hardware.h> +#include <asm/clkdev.h> +#include <mach/clkdev.h> +#include <mach/platform.h> +#include "clock.h" +#include "common.h" + +static struct clk clk_armpll; +static struct clk clk_usbpll; +static DEFINE_MUTEX(clkm_lock); + +/* + * Post divider values for PLLs based on selected register value + */ +static const u32 pll_postdivs[4] = {1, 2, 4, 8}; + +static unsigned long local_return_parent_rate(struct clk *clk) +{ + /* + * If a clock has a rate of 0, then it inherits it's parent + * clock rate + */ + while (clk->rate == 0) + clk = clk->parent; + + return clk->rate; +} + +/* 32KHz clock has a fixed rate and is not stoppable */ +static struct clk osc_32KHz = { + .rate = LPC32XX_CLOCK_OSC_FREQ, + .get_rate = local_return_parent_rate, +}; + +static int local_pll397_enable(struct clk *clk, int enable) +{ + u32 reg; + unsigned long timeout = 1 + msecs_to_jiffies(10); + + reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL); + + if (enable == 0) { + reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; + __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); + } else { + /* Enable PLL397 */ + reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; + __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); + + /* Wait for PLL397 lock */ + while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & + LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) && + (timeout > jiffies)) + cpu_relax(); + + if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & + LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) + return -ENODEV; + } + + return 0; +} + +static int local_oscmain_enable(struct clk *clk, int enable) +{ + u32 reg; + unsigned long timeout = 1 + msecs_to_jiffies(10); + + reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL); + + if (enable == 0) { + reg |= LPC32XX_CLKPWR_MOSC_DISABLE; + __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); + } else { + /* Enable main oscillator */ + reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE; + __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); + + /* Wait for main oscillator to start */ + while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & + LPC32XX_CLKPWR_MOSC_DISABLE) != 0) && + (timeout > jiffies)) + cpu_relax(); + + if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & + LPC32XX_CLKPWR_MOSC_DISABLE) != 0) + return -ENODEV; + } + + return 0; +} + +static struct clk osc_pll397 = { + .parent = &osc_32KHz, + .enable = local_pll397_enable, + .rate = LPC32XX_CLOCK_OSC_FREQ * 397, + .get_rate = local_return_parent_rate, +}; + +static struct clk osc_main = { + .enable = local_oscmain_enable, + .rate = LPC32XX_MAIN_OSC_FREQ, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_sys; + +/* + * Convert a PLL register value to a PLL output frequency + */ +u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval) +{ + struct clk_pll_setup pllcfg; + + pllcfg.cco_bypass_b15 = 0; + pllcfg.direct_output_b14 = 0; + pllcfg.fdbk_div_ctrl_b13 = 0; + if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0) + pllcfg.cco_bypass_b15 = 1; + if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0) + pllcfg.direct_output_b14 = 1; + if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0) + pllcfg.fdbk_div_ctrl_b13 = 1; + pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF); + pllcfg.pll_n = 1 + ((regval >> 9) & 0x3); + pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)]; + + return clk_check_pll_setup(inputclk, &pllcfg); +} + +/* + * Setup the HCLK PLL with a PLL structure + */ +static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup) +{ + u32 tv, tmp = 0; + + if (PllSetup->analog_on != 0) + tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP; + if (PllSetup->cco_bypass_b15 != 0) + tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS; + if (PllSetup->direct_output_b14 != 0) + tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS; + if (PllSetup->fdbk_div_ctrl_b13 != 0) + tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK; + + tv = ffs(PllSetup->pll_p) - 1; + if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3)) + return 0; + + tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv); + tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1); + tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1); + + return tmp; +} + +/* + * Update the ARM core PLL frequency rate variable from the actual PLL setting + */ +static void local_update_armpll_rate(void) +{ + u32 clkin, pllreg; + + clkin = clk_armpll.parent->rate; + pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; + + clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg); +} + +/* + * Find a PLL configuration for the selected input frequency + */ +static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq, + struct clk_pll_setup *pllsetup) +{ + u32 ifreq, freqtol, m, n, p, fclkout; + + /* Determine frequency tolerance limits */ + freqtol = target_freq / 250; + ifreq = pllin_freq; + + /* Is direct bypass mode possible? */ + if (abs(pllin_freq - target_freq) <= freqtol) { + pllsetup->analog_on = 0; + pllsetup->cco_bypass_b15 = 1; + pllsetup->direct_output_b14 = 1; + pllsetup->fdbk_div_ctrl_b13 = 1; + pllsetup->pll_p = pll_postdivs[0]; + pllsetup->pll_n = 1; + pllsetup->pll_m = 1; + return clk_check_pll_setup(ifreq, pllsetup); + } else if (target_freq <= ifreq) { + pllsetup->analog_on = 0; + pllsetup->cco_bypass_b15 = 1; + pllsetup->direct_output_b14 = 0; + pllsetup->fdbk_div_ctrl_b13 = 1; + pllsetup->pll_n = 1; + pllsetup->pll_m = 1; + for (p = 0; p <= 3; p++) { + pllsetup->pll_p = pll_postdivs[p]; + fclkout = clk_check_pll_setup(ifreq, pllsetup); + if (abs(target_freq - fclkout) <= freqtol) + return fclkout; + } + } + + /* Is direct mode possible? */ + pllsetup->analog_on = 1; + pllsetup->cco_bypass_b15 = 0; + pllsetup->direct_output_b14 = 1; + pllsetup->fdbk_div_ctrl_b13 = 0; + pllsetup->pll_p = pll_postdivs[0]; + for (m = 1; m <= 256; m++) { + for (n = 1; n <= 4; n++) { + /* Compute output frequency for this value */ + pllsetup->pll_n = n; + pllsetup->pll_m = m; + fclkout = clk_check_pll_setup(ifreq, + pllsetup); + if (abs(target_freq - fclkout) <= + freqtol) + return fclkout; + } + } + + /* Is integer mode possible? */ + pllsetup->analog_on = 1; + pllsetup->cco_bypass_b15 = 0; + pllsetup->direct_output_b14 = 0; + pllsetup->fdbk_div_ctrl_b13 = 1; + for (m = 1; m <= 256; m++) { + for (n = 1; n <= 4; n++) { + for (p = 0; p < 4; p++) { + /* Compute output frequency */ + pllsetup->pll_p = pll_postdivs[p]; + pllsetup->pll_n = n; + pllsetup->pll_m = m; + fclkout = clk_check_pll_setup( + ifreq, pllsetup); + if (abs(target_freq - fclkout) <= freqtol) + return fclkout; + } + } + } + + /* Try non-integer mode */ + pllsetup->analog_on = 1; + pllsetup->cco_bypass_b15 = 0; + pllsetup->direct_output_b14 = 0; + pllsetup->fdbk_div_ctrl_b13 = 0; + for (m = 1; m <= 256; m++) { + for (n = 1; n <= 4; n++) { + for (p = 0; p < 4; p++) { + /* Compute output frequency */ + pllsetup->pll_p = pll_postdivs[p]; + pllsetup->pll_n = n; + pllsetup->pll_m = m; + fclkout = clk_check_pll_setup( + ifreq, pllsetup); + if (abs(target_freq - fclkout) <= freqtol) + return fclkout; + } + } + } + + return 0; +} + +static struct clk clk_armpll = { + .parent = &clk_sys, + .get_rate = local_return_parent_rate, +}; + +/* + * Setup the USB PLL with a PLL structure + */ +static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup) +{ + u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup); + + reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF; + reg |= tmp; + __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + + return clk_check_pll_setup(clk_usbpll.parent->rate, + pHCLKPllSetup); +} + +static int local_usbpll_enable(struct clk *clk, int enable) +{ + u32 reg; + int ret = -ENODEV; + unsigned long timeout = 1 + msecs_to_jiffies(10); + + reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); + + if (enable == 0) { + reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | + LPC32XX_CLKPWR_USBCTRL_CLK_EN2); + __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + } else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) { + reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; + __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + + /* Wait for PLL lock */ + while ((timeout > jiffies) & (ret == -ENODEV)) { + reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); + if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) + ret = 0; + } + + if (ret == 0) { + reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2; + __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + } + } + + return ret; +} + +static unsigned long local_usbpll_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 clkin, usbdiv; + struct clk_pll_setup pllsetup; + + /* + * Unlike other clocks, this clock has a KHz input rate, so bump + * it up to work with the PLL function + */ + rate = rate * 1000; + + clkin = clk->parent->rate; + usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & + LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; + clkin = clkin / usbdiv; + + /* Try to find a good rate setup */ + if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) + return 0; + + return clk_check_pll_setup(clkin, &pllsetup); +} + +static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) +{ + u32 clkin, reg, usbdiv; + struct clk_pll_setup pllsetup; + + /* + * Unlike other clocks, this clock has a KHz input rate, so bump + * it up to work with the PLL function + */ + rate = rate * 1000; + + clkin = clk->get_rate(clk); + usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & + LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; + clkin = clkin / usbdiv; + + /* Try to find a good rate setup */ + if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) + return -EINVAL; + + local_usbpll_enable(clk, 0); + + reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); + reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; + __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + + pllsetup.analog_on = 1; + local_clk_usbpll_setup(&pllsetup); + + clk->rate = clk_check_pll_setup(clkin, &pllsetup); + + reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); + reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2; + __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); + + return 0; +} + +static struct clk clk_usbpll = { + .parent = &osc_main, + .set_rate = local_usbpll_set_rate, + .enable = local_usbpll_enable, + .rate = 48000, /* In KHz */ + .get_rate = local_return_parent_rate, + .round_rate = local_usbpll_round_rate, +}; + +static u32 clk_get_hclk_div(void) +{ + static const u32 hclkdivs[4] = {1, 2, 4, 4}; + return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW( + __raw_readl(LPC32XX_CLKPWR_HCLK_DIV))]; +} + +static struct clk clk_hclk = { + .parent = &clk_armpll, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_pclk = { + .parent = &clk_armpll, + .get_rate = local_return_parent_rate, +}; + +static int local_onoff_enable(struct clk *clk, int enable) +{ + u32 tmp; + + tmp = __raw_readl(clk->enable_reg); + + if (enable == 0) + tmp &= ~clk->enable_mask; + else + tmp |= clk->enable_mask; + + __raw_writel(tmp, clk->enable_reg); + + return 0; +} + +/* Peripheral clock sources */ +static struct clk clk_timer0 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, + .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN, + .get_rate = local_return_parent_rate, +}; +static struct clk clk_timer1 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, + .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, + .get_rate = local_return_parent_rate, +}; +static struct clk clk_timer2 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, + .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN, + .get_rate = local_return_parent_rate, +}; +static struct clk clk_timer3 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, + .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN, + .get_rate = local_return_parent_rate, +}; +static struct clk clk_wdt = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_TIMER_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_PWMCLK_WDOG_EN, + .get_rate = local_return_parent_rate, +}; +static struct clk clk_vfp9 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_DEBUG_CTRL, + .enable_mask = LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT, + .get_rate = local_return_parent_rate, +}; +static struct clk clk_dma = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_DMA_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_uart3 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_uart4 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_uart5 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_uart6 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_i2c0 = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_i2c1 = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_i2c2 = { + .parent = &clk_pclk, + .enable = local_onoff_enable, + .enable_reg = io_p2v(LPC32XX_USB_BASE + 0xFF4), + .enable_mask = 0x4, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_ssp0 = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_ssp1 = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_kscan = { + .parent = &osc_32KHz, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_KEY_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_nand = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_i2s0 = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_i2s1 = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN, + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_net = { + .parent = &clk_hclk, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_MACCLK_CTRL, + .enable_mask = (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN | + LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN | + LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN), + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_rtc = { + .parent = &osc_32KHz, + .rate = 1, /* 1 Hz */ + .get_rate = local_return_parent_rate, +}; + +static struct clk clk_usbd = { + .parent = &clk_usbpll, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_USB_CTRL, + .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN, + .get_rate = local_return_parent_rate, +}; + +static int tsc_onoff_enable(struct clk *clk, int enable) +{ + u32 tmp; + + /* Make sure 32KHz clock is the selected clock */ + tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); + tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; + __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); + + if (enable == 0) + __raw_writel(0, clk->enable_reg); + else + __raw_writel(clk->enable_mask, clk->enable_reg); + + return 0; +} + +static struct clk clk_tsc = { + .parent = &osc_32KHz, + .enable = tsc_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, + .get_rate = local_return_parent_rate, +}; + +static int mmc_onoff_enable(struct clk *clk, int enable) +{ + u32 tmp; + + tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & + ~LPC32XX_CLKPWR_MSCARD_SDCARD_EN; + + /* If rate is 0, disable clock */ + if (enable != 0) + tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN; + + __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); + + return 0; +} + +static unsigned long mmc_get_rate(struct clk *clk) +{ + u32 div, rate, oldclk; + + /* The MMC clock must be on when accessing an MMC register */ + oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); + __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN, + LPC32XX_CLKPWR_MS_CTRL); + div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); + __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL); + + /* Get the parent clock rate */ + rate = clk->parent->get_rate(clk->parent); + + /* Get the MMC controller clock divider value */ + div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); + + if (!div) + div = 1; + + return rate / div; +} + +static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long div, prate; + + /* Get the parent clock rate */ + prate = clk->parent->get_rate(clk->parent); + + if (rate >= prate) + return prate; + + div = prate / rate; + if (div > 0xf) + div = 0xf; + + return prate / div; +} + +static int mmc_set_rate(struct clk *clk, unsigned long rate) +{ + u32 oldclk, tmp; + unsigned long prate, div, crate = mmc_round_rate(clk, rate); + + prate = clk->parent->get_rate(clk->parent); + + div = prate / crate; + + /* The MMC clock must be on when accessing an MMC register */ + oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); + __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN, + LPC32XX_CLKPWR_MS_CTRL); + tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & + ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); + tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div); + __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); + + __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL); + + return 0; +} + +static struct clk clk_mmc = { + .parent = &clk_armpll, + .set_rate = mmc_set_rate, + .get_rate = mmc_get_rate, + .round_rate = mmc_round_rate, + .enable = mmc_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_MS_CTRL, + .enable_mask = LPC32XX_CLKPWR_MSCARD_SDCARD_EN, +}; + +static unsigned long clcd_get_rate(struct clk *clk) +{ + u32 tmp, div, rate, oldclk; + + /* The LCD clock must be on when accessing an LCD register */ + oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); + __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, + LPC32XX_CLKPWR_LCDCLK_CTRL); + tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); + __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); + + rate = clk->parent->get_rate(clk->parent); + + /* Only supports internal clocking */ + if (tmp & TIM2_BCD) + return rate; + + div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22); + tmp = rate / (2 + div); + + return tmp; +} + +static int clcd_set_rate(struct clk *clk, unsigned long rate) +{ + u32 tmp, prate, div, oldclk; + + /* The LCD clock must be on when accessing an LCD register */ + oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); + __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, + LPC32XX_CLKPWR_LCDCLK_CTRL); + + tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD; + prate = clk->parent->get_rate(clk->parent); + + if (rate < prate) { + /* Find closest divider */ + div = prate / rate; + if (div >= 2) { + div -= 2; + tmp &= ~TIM2_BCD; + } + + tmp &= ~(0xF800001F); + tmp |= (div & 0x1F); + tmp |= (((div >> 5) & 0x1F) << 27); + } + + __raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); + __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); + + return 0; +} + +static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate) +{ + u32 prate, div; + + prate = clk->parent->get_rate(clk->parent); + + if (rate >= prate) + rate = prate; + else { + div = prate / rate; + if (div > 0x3ff) + div = 0x3ff; + + rate = prate / div; + } + + return rate; +} + +static struct clk clk_lcd = { + .parent = &clk_hclk, + .set_rate = clcd_set_rate, + .get_rate = clcd_get_rate, + .round_rate = clcd_round_rate, + .enable = local_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_LCDCLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN, +}; + +static inline void clk_lock(void) +{ + mutex_lock(&clkm_lock); +} + +static inline void clk_unlock(void) +{ + mutex_unlock(&clkm_lock); +} + +static void local_clk_disable(struct clk *clk) +{ + WARN_ON(clk->usecount == 0); + + /* Don't attempt to disable clock if it has no users */ + if (clk->usecount > 0) { + clk->usecount--; + + /* Only disable clock when it has no more users */ + if ((clk->usecount == 0) && (clk->enable)) + clk->enable(clk, 0); + + /* Check parent clocks, they may need to be disabled too */ + if (clk->parent) + local_clk_disable(clk->parent); + } +} + +static int local_clk_enable(struct clk *clk) +{ + int ret = 0; + + /* Enable parent clocks first and update use counts */ + if (clk->parent) + ret = local_clk_enable(clk->parent); + + if (!ret) { + /* Only enable clock if it's currently disabled */ + if ((clk->usecount == 0) && (clk->enable)) + ret = clk->enable(clk, 1); + + if (!ret) + clk->usecount++; + else if (clk->parent) + local_clk_disable(clk->parent); + } + + return ret; +} + +/* + * clk_enable - inform the system when the clock source should be running. + */ +int clk_enable(struct clk *clk) +{ + int ret; + + clk_lock(); + ret = local_clk_enable(clk); + clk_unlock(); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +/* + * clk_disable - inform the system when the clock source is no longer required + */ +void clk_disable(struct clk *clk) +{ + clk_lock(); + local_clk_disable(clk); + clk_unlock(); +} +EXPORT_SYMBOL(clk_disable); + +/* + * clk_get_rate - obtain the current clock rate (in Hz) for a clock source + */ +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long rate; + + clk_lock(); + rate = clk->get_rate(clk); + clk_unlock(); + + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * clk_set_rate - set the clock rate for a clock source + */ +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + /* + * Most system clocks can only be enabled or disabled, with + * the actual rate set as part of the peripheral dividers + * instead of high level clock control + */ + if (clk->set_rate) { + clk_lock(); + ret = clk->set_rate(clk, rate); + clk_unlock(); + } + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +/* + * clk_round_rate - adjust a rate to the exact rate a clock can provide + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + clk_lock(); + + if (clk->round_rate) + rate = clk->round_rate(clk, rate); + else + rate = clk->get_rate(clk); + + clk_unlock(); + + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + +/* + * clk_set_parent - set the parent clock source for this clock + */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + /* Clock re-parenting is not supported */ + return -EINVAL; +} +EXPORT_SYMBOL(clk_set_parent); + +/* + * clk_get_parent - get the parent clock source for this clock + */ +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = (d), \ + .con_id = (n), \ + .clk = &(c), \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz) + _REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397) + _REGISTER_CLOCK(NULL, "osc_main", osc_main) + _REGISTER_CLOCK(NULL, "sys_ck", clk_sys) + _REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll) + _REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll) + _REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk) + _REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk) + _REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0) + _REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1) + _REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2) + _REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3) + _REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9) + _REGISTER_CLOCK(NULL, "clk_dmac", clk_dma) + _REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt) + _REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3) + _REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4) + _REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5) + _REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6) + _REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0) + _REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1) + _REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2) + _REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0) + _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1) + _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan) + _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) + _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0) + _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1) + _REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc) + _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc) + _REGISTER_CLOCK("lpc-net.0", NULL, clk_net) + _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) + _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd) + _REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc) +}; + +static int __init clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lookups); i++) + clkdev_add(&lookups[i]); + + /* + * Setup muxed SYSCLK for HCLK PLL base -this selects the + * parent clock used for the ARM PLL and is used to derive + * the many system clock rates in the device. + */ + if (clk_is_sysclk_mainosc() != 0) + clk_sys.parent = &osc_main; + else + clk_sys.parent = &osc_pll397; + + clk_sys.rate = clk_sys.parent->rate; + + /* Compute the current ARM PLL and USB PLL frequencies */ + local_update_armpll_rate(); + + /* Compute HCLK and PCLK bus rates */ + clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div(); + clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div(); + + /* + * Enable system clocks - this step is somewhat formal, as the + * clocks are already running, but it does get the clock data + * inline with the actual system state. Never disable these + * clocks as they will only stop if the system is going to sleep. + * In that case, the chip/system power management functions will + * handle clock gating. + */ + if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk)) + printk(KERN_ERR "Error enabling system HCLK and PCLK\n"); + + /* + * Timers 0 and 1 were enabled and are being used by the high + * resolution tick function prior to this driver being initialized. + * Tag them now as used. + */ + if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1)) + printk(KERN_ERR "Error enabling timer tick clocks\n"); + + return 0; +} +core_initcall(clk_init); + diff --git a/arch/arm/mach-lpc32xx/clock.h b/arch/arm/mach-lpc32xx/clock.h new file mode 100644 index 000000000000..c0a8434307f7 --- /dev/null +++ b/arch/arm/mach-lpc32xx/clock.h @@ -0,0 +1,38 @@ +/* + * arch/arm/mach-lpc32xx/clock.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LPC32XX_CLOCK_H +#define __LPC32XX_CLOCK_H + +struct clk { + struct list_head node; + struct clk *parent; + u32 rate; + u32 usecount; + + int (*set_rate) (struct clk *, unsigned long); + unsigned long (*round_rate) (struct clk *, unsigned long); + unsigned long (*get_rate) (struct clk *clk); + int (*enable) (struct clk *, int); + + /* Register address and bit mask for simple clocks */ + void __iomem *enable_reg; + u32 enable_mask; +}; + +#endif diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c new file mode 100644 index 000000000000..ee24dc28e93e --- /dev/null +++ b/arch/arm/mach-lpc32xx/common.c @@ -0,0 +1,271 @@ +/* + * arch/arm/mach-lpc32xx/common.c + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/i2c-pnx.h> +#include <linux/io.h> + +#include <asm/mach/map.h> + +#include <mach/i2c.h> +#include <mach/hardware.h> +#include <mach/platform.h> +#include "common.h" + +/* + * Watchdog timer + */ +static struct resource watchdog_resources[] = { + [0] = { + .start = LPC32XX_WDTIM_BASE, + .end = LPC32XX_WDTIM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device lpc32xx_watchdog_device = { + .name = "pnx4008-watchdog", + .id = -1, + .num_resources = ARRAY_SIZE(watchdog_resources), + .resource = watchdog_resources, +}; + +/* + * I2C busses + */ +static struct i2c_pnx_data i2c0_data = { + .name = I2C_CHIP_NAME "1", + .base = LPC32XX_I2C1_BASE, + .irq = IRQ_LPC32XX_I2C_1, +}; + +static struct i2c_pnx_data i2c1_data = { + .name = I2C_CHIP_NAME "2", + .base = LPC32XX_I2C2_BASE, + .irq = IRQ_LPC32XX_I2C_2, +}; + +static struct i2c_pnx_data i2c2_data = { + .name = "USB-I2C", + .base = LPC32XX_OTG_I2C_BASE, + .irq = IRQ_LPC32XX_USB_I2C, +}; + +struct platform_device lpc32xx_i2c0_device = { + .name = "pnx-i2c", + .id = 0, + .dev = { + .platform_data = &i2c0_data, + }, +}; + +struct platform_device lpc32xx_i2c1_device = { + .name = "pnx-i2c", + .id = 1, + .dev = { + .platform_data = &i2c1_data, + }, +}; + +struct platform_device lpc32xx_i2c2_device = { + .name = "pnx-i2c", + .id = 2, + .dev = { + .platform_data = &i2c2_data, + }, +}; + +/* + * Returns the unique ID for the device + */ +void lpc32xx_get_uid(u32 devid[4]) +{ + int i; + + for (i = 0; i < 4; i++) + devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2)); +} + +/* + * Returns SYSCLK source + * 0 = PLL397, 1 = main oscillator + */ +int clk_is_sysclk_mainosc(void) +{ + if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) & + LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0) + return 1; + + return 0; +} + +/* + * System reset via the watchdog timer + */ +void lpc32xx_watchdog_reset(void) +{ + /* Make sure WDT clocks are enabled */ + __raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, + LPC32XX_CLKPWR_TIMER_CLK_CTRL); + + /* Instant assert of RESETOUT_N with pulse length 1mS */ + __raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18)); + __raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC)); +} + +/* + * Detects and returns IRAM size for the device variation + */ +#define LPC32XX_IRAM_BANK_SIZE SZ_128K +static u32 iram_size; +u32 lpc32xx_return_iram_size(void) +{ + if (iram_size == 0) { + u32 savedval1, savedval2; + void __iomem *iramptr1, *iramptr2; + + iramptr1 = io_p2v(LPC32XX_IRAM_BASE); + iramptr2 = io_p2v(LPC32XX_IRAM_BASE + LPC32XX_IRAM_BANK_SIZE); + savedval1 = __raw_readl(iramptr1); + savedval2 = __raw_readl(iramptr2); + + if (savedval1 == savedval2) { + __raw_writel(savedval2 + 1, iramptr2); + if (__raw_readl(iramptr1) == savedval2 + 1) + iram_size = LPC32XX_IRAM_BANK_SIZE; + else + iram_size = LPC32XX_IRAM_BANK_SIZE * 2; + __raw_writel(savedval2, iramptr2); + } else + iram_size = LPC32XX_IRAM_BANK_SIZE * 2; + } + + return iram_size; +} + +/* + * Computes PLL rate from PLL register and input clock + */ +u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup) +{ + u32 ilfreq, p, m, n, fcco, fref, cfreq; + int mode; + + /* + * PLL requirements + * ifreq must be >= 1MHz and <= 20MHz + * FCCO must be >= 156MHz and <= 320MHz + * FREF must be >= 1MHz and <= 27MHz + * Assume the passed input data is not valid + */ + + ilfreq = ifreq; + m = pllsetup->pll_m; + n = pllsetup->pll_n; + p = pllsetup->pll_p; + + mode = (pllsetup->cco_bypass_b15 << 2) | + (pllsetup->direct_output_b14 << 1) | + pllsetup->fdbk_div_ctrl_b13; + + switch (mode) { + case 0x0: /* Non-integer mode */ + cfreq = (m * ilfreq) / (2 * p * n); + fcco = (m * ilfreq) / n; + fref = ilfreq / n; + break; + + case 0x1: /* integer mode */ + cfreq = (m * ilfreq) / n; + fcco = (m * ilfreq) / (n * 2 * p); + fref = ilfreq / n; + break; + + case 0x2: + case 0x3: /* Direct mode */ + cfreq = (m * ilfreq) / n; + fcco = cfreq; + fref = ilfreq / n; + break; + + case 0x4: + case 0x5: /* Bypass mode */ + cfreq = ilfreq / (2 * p); + fcco = 156000000; + fref = 1000000; + break; + + case 0x6: + case 0x7: /* Direct bypass mode */ + default: + cfreq = ilfreq; + fcco = 156000000; + fref = 1000000; + break; + } + + if (fcco < 156000000 || fcco > 320000000) + cfreq = 0; + + if (fref < 1000000 || fref > 27000000) + cfreq = 0; + + return (u32) cfreq; +} + +u32 clk_get_pclk_div(void) +{ + return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F); +} + +static struct map_desc lpc32xx_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(LPC32XX_AHB0_START), + .pfn = __phys_to_pfn(LPC32XX_AHB0_START), + .length = LPC32XX_AHB0_SIZE, + .type = MT_DEVICE + }, + { + .virtual = IO_ADDRESS(LPC32XX_AHB1_START), + .pfn = __phys_to_pfn(LPC32XX_AHB1_START), + .length = LPC32XX_AHB1_SIZE, + .type = MT_DEVICE + }, + { + .virtual = IO_ADDRESS(LPC32XX_FABAPB_START), + .pfn = __phys_to_pfn(LPC32XX_FABAPB_START), + .length = LPC32XX_FABAPB_SIZE, + .type = MT_DEVICE + }, + { + .virtual = IO_ADDRESS(LPC32XX_IRAM_BASE), + .pfn = __phys_to_pfn(LPC32XX_IRAM_BASE), + .length = (LPC32XX_IRAM_BANK_SIZE * 2), + .type = MT_DEVICE + }, +}; + +void __init lpc32xx_map_io(void) +{ + iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc)); +} diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h new file mode 100644 index 000000000000..f82211fd80c1 --- /dev/null +++ b/arch/arm/mach-lpc32xx/common.h @@ -0,0 +1,73 @@ +/* + * arch/arm/mach-lpc32xx/common.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2009-2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LPC32XX_COMMON_H +#define __LPC32XX_COMMON_H + +#include <linux/platform_device.h> + +/* + * Arch specific platform device structures + */ +extern struct platform_device lpc32xx_watchdog_device; +extern struct platform_device lpc32xx_i2c0_device; +extern struct platform_device lpc32xx_i2c1_device; +extern struct platform_device lpc32xx_i2c2_device; + +/* + * Other arch specific structures and functions + */ +extern struct sys_timer lpc32xx_timer; +extern void __init lpc32xx_init_irq(void); +extern void __init lpc32xx_map_io(void); +extern void __init lpc32xx_serial_init(void); +extern void __init lpc32xx_gpio_init(void); + +/* + * Structure used for setting up and querying the PLLS + */ +struct clk_pll_setup { + int analog_on; + int cco_bypass_b15; + int direct_output_b14; + int fdbk_div_ctrl_b13; + int pll_p; + int pll_n; + u32 pll_m; +}; + +extern int clk_is_sysclk_mainosc(void); +extern u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup); +extern u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval); +extern u32 clk_get_pclk_div(void); + +/* + * Returns the LPC32xx unique 128-bit chip ID + */ +extern void lpc32xx_get_uid(u32 devid[4]); + +extern void lpc32xx_watchdog_reset(void); +extern u32 lpc32xx_return_iram_size(void); + +/* + * Pointers used for sizing and copying suspend function data + */ +extern int lpc32xx_sys_suspend(void); +extern int lpc32xx_sys_suspend_sz; + +#endif diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/arch/arm/mach-lpc32xx/gpiolib.c new file mode 100644 index 000000000000..69061ea8997a --- /dev/null +++ b/arch/arm/mach-lpc32xx/gpiolib.c @@ -0,0 +1,446 @@ +/* + * arch/arm/mach-lpc32xx/gpiolib.c + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <mach/platform.h> +#include "common.h" + +#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000) +#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004) +#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008) +#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C) +#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010) +#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014) +#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018) +#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C) +#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020) +#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024) +#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028) +#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) +#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) +#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040) +#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044) +#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048) +#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C) +#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050) +#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054) +#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058) +#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060) +#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064) +#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068) +#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C) +#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070) +#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074) +#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078) + +#define GPIO012_PIN_TO_BIT(x) (1 << (x)) +#define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25)) +#define GPO3_PIN_TO_BIT(x) (1 << (x)) +#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) +#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x)) +#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y)) +#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1) +#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) + +struct gpio_regs { + void __iomem *inp_state; + void __iomem *outp_set; + void __iomem *outp_clr; + void __iomem *dir_set; + void __iomem *dir_clr; +}; + +/* + * GPIO names + */ +static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = { + "p0.0", "p0.1", "p0.2", "p0.3", + "p0.4", "p0.5", "p0.6", "p0.7" +}; + +static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = { + "p1.0", "p1.1", "p1.2", "p1.3", + "p1.4", "p1.5", "p1.6", "p1.7", + "p1.8", "p1.9", "p1.10", "p1.11", + "p1.12", "p1.13", "p1.14", "p1.15", + "p1.16", "p1.17", "p1.18", "p1.19", + "p1.20", "p1.21", "p1.22", "p1.23", +}; + +static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = { + "p2.0", "p2.1", "p2.2", "p2.3", + "p2.4", "p2.5", "p2.6", "p2.7", + "p2.8", "p2.9", "p2.10", "p2.11", + "p2.12" +}; + +static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = { + "gpi000", "gpio01", "gpio02", "gpio03", + "gpio04", "gpio05" +}; + +static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = { + "gpi00", "gpi01", "gpi02", "gpi03", + "gpi04", "gpi05", "gpi06", "gpi07", + "gpi08", "gpi09", NULL, NULL, + NULL, NULL, NULL, "gpi15", + "gpi16", "gpi17", "gpi18", "gpi19", + "gpi20", "gpi21", "gpi22", "gpi23", + "gpi24", "gpi25", "gpi26", "gpi27" +}; + +static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = { + "gpo00", "gpo01", "gpo02", "gpo03", + "gpo04", "gpo05", "gpo06", "gpo07", + "gpo08", "gpo09", "gpo10", "gpo11", + "gpo12", "gpo13", "gpo14", "gpo15", + "gpo16", "gpo17", "gpo18", "gpo19", + "gpo20", "gpo21", "gpo22", "gpo23" +}; + +static struct gpio_regs gpio_grp_regs_p0 = { + .inp_state = LPC32XX_GPIO_P0_INP_STATE, + .outp_set = LPC32XX_GPIO_P0_OUTP_SET, + .outp_clr = LPC32XX_GPIO_P0_OUTP_CLR, + .dir_set = LPC32XX_GPIO_P0_DIR_SET, + .dir_clr = LPC32XX_GPIO_P0_DIR_CLR, +}; + +static struct gpio_regs gpio_grp_regs_p1 = { + .inp_state = LPC32XX_GPIO_P1_INP_STATE, + .outp_set = LPC32XX_GPIO_P1_OUTP_SET, + .outp_clr = LPC32XX_GPIO_P1_OUTP_CLR, + .dir_set = LPC32XX_GPIO_P1_DIR_SET, + .dir_clr = LPC32XX_GPIO_P1_DIR_CLR, +}; + +static struct gpio_regs gpio_grp_regs_p2 = { + .inp_state = LPC32XX_GPIO_P2_INP_STATE, + .outp_set = LPC32XX_GPIO_P2_OUTP_SET, + .outp_clr = LPC32XX_GPIO_P2_OUTP_CLR, + .dir_set = LPC32XX_GPIO_P2_DIR_SET, + .dir_clr = LPC32XX_GPIO_P2_DIR_CLR, +}; + +static struct gpio_regs gpio_grp_regs_p3 = { + .inp_state = LPC32XX_GPIO_P3_INP_STATE, + .outp_set = LPC32XX_GPIO_P3_OUTP_SET, + .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR, + .dir_set = LPC32XX_GPIO_P2_DIR_SET, + .dir_clr = LPC32XX_GPIO_P2_DIR_CLR, +}; + +struct lpc32xx_gpio_chip { + struct gpio_chip chip; + struct gpio_regs *gpio_grp; +}; + +static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio( + struct gpio_chip *gpc) +{ + return container_of(gpc, struct lpc32xx_gpio_chip, chip); +} + +static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group, + unsigned pin, int input) +{ + if (input) + __raw_writel(GPIO012_PIN_TO_BIT(pin), + group->gpio_grp->dir_clr); + else + __raw_writel(GPIO012_PIN_TO_BIT(pin), + group->gpio_grp->dir_set); +} + +static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group, + unsigned pin, int input) +{ + u32 u = GPIO3_PIN_TO_BIT(pin); + + if (input) + __raw_writel(u, group->gpio_grp->dir_clr); + else + __raw_writel(u, group->gpio_grp->dir_set); +} + +static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group, + unsigned pin, int high) +{ + if (high) + __raw_writel(GPIO012_PIN_TO_BIT(pin), + group->gpio_grp->outp_set); + else + __raw_writel(GPIO012_PIN_TO_BIT(pin), + group->gpio_grp->outp_clr); +} + +static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group, + unsigned pin, int high) +{ + u32 u = GPIO3_PIN_TO_BIT(pin); + + if (high) + __raw_writel(u, group->gpio_grp->outp_set); + else + __raw_writel(u, group->gpio_grp->outp_clr); +} + +static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group, + unsigned pin, int high) +{ + if (high) + __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set); + else + __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr); +} + +static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group, + unsigned pin) +{ + return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), + pin); +} + +static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group, + unsigned pin) +{ + int state = __raw_readl(group->gpio_grp->inp_state); + + /* + * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped + * to bits 10..14, while GPIOP3-5 is mapped to bit 24. + */ + return GPIO3_PIN_IN_SEL(state, pin); +} + +static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group, + unsigned pin) +{ + return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin); +} + +/* + * GENERIC_GPIO primitives. + */ +static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip, + unsigned pin) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpio_dir_p012(group, pin, 1); + + return 0; +} + +static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip, + unsigned pin) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpio_dir_p3(group, pin, 1); + + return 0; +} + +static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip, + unsigned pin) +{ + return 0; +} + +static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + return __get_gpio_state_p012(group, pin); +} + +static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + return __get_gpio_state_p3(group, pin); +} + +static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + return __get_gpi_state_p3(group, pin); +} + +static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpio_dir_p012(group, pin, 0); + + return 0; +} + +static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpio_dir_p3(group, pin, 0); + + return 0; +} + +static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin, + int value) +{ + return 0; +} + +static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpio_level_p012(group, pin, value); +} + +static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpio_level_p3(group, pin, value); +} + +static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin, + int value) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + __set_gpo_level_p3(group, pin, value); +} + +static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin) +{ + if (pin < chip->ngpio) + return 0; + + return -EINVAL; +} + +static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = { + { + .chip = { + .label = "gpio_p0", + .direction_input = lpc32xx_gpio_dir_input_p012, + .get = lpc32xx_gpio_get_value_p012, + .direction_output = lpc32xx_gpio_dir_output_p012, + .set = lpc32xx_gpio_set_value_p012, + .request = lpc32xx_gpio_request, + .base = LPC32XX_GPIO_P0_GRP, + .ngpio = LPC32XX_GPIO_P0_MAX, + .names = gpio_p0_names, + .can_sleep = 0, + }, + .gpio_grp = &gpio_grp_regs_p0, + }, + { + .chip = { + .label = "gpio_p1", + .direction_input = lpc32xx_gpio_dir_input_p012, + .get = lpc32xx_gpio_get_value_p012, + .direction_output = lpc32xx_gpio_dir_output_p012, + .set = lpc32xx_gpio_set_value_p012, + .request = lpc32xx_gpio_request, + .base = LPC32XX_GPIO_P1_GRP, + .ngpio = LPC32XX_GPIO_P1_MAX, + .names = gpio_p1_names, + .can_sleep = 0, + }, + .gpio_grp = &gpio_grp_regs_p1, + }, + { + .chip = { + .label = "gpio_p2", + .direction_input = lpc32xx_gpio_dir_input_p012, + .get = lpc32xx_gpio_get_value_p012, + .direction_output = lpc32xx_gpio_dir_output_p012, + .set = lpc32xx_gpio_set_value_p012, + .request = lpc32xx_gpio_request, + .base = LPC32XX_GPIO_P2_GRP, + .ngpio = LPC32XX_GPIO_P2_MAX, + .names = gpio_p2_names, + .can_sleep = 0, + }, + .gpio_grp = &gpio_grp_regs_p2, + }, + { + .chip = { + .label = "gpio_p3", + .direction_input = lpc32xx_gpio_dir_input_p3, + .get = lpc32xx_gpio_get_value_p3, + .direction_output = lpc32xx_gpio_dir_output_p3, + .set = lpc32xx_gpio_set_value_p3, + .request = lpc32xx_gpio_request, + .base = LPC32XX_GPIO_P3_GRP, + .ngpio = LPC32XX_GPIO_P3_MAX, + .names = gpio_p3_names, + .can_sleep = 0, + }, + .gpio_grp = &gpio_grp_regs_p3, + }, + { + .chip = { + .label = "gpi_p3", + .direction_input = lpc32xx_gpio_dir_in_always, + .get = lpc32xx_gpi_get_value, + .request = lpc32xx_gpio_request, + .base = LPC32XX_GPI_P3_GRP, + .ngpio = LPC32XX_GPI_P3_MAX, + .names = gpi_p3_names, + .can_sleep = 0, + }, + .gpio_grp = &gpio_grp_regs_p3, + }, + { + .chip = { + .label = "gpo_p3", + .direction_output = lpc32xx_gpio_dir_out_always, + .set = lpc32xx_gpo_set_value, + .request = lpc32xx_gpio_request, + .base = LPC32XX_GPO_P3_GRP, + .ngpio = LPC32XX_GPO_P3_MAX, + .names = gpo_p3_names, + .can_sleep = 0, + }, + .gpio_grp = &gpio_grp_regs_p3, + }, +}; + +void __init lpc32xx_gpio_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) + gpiochip_add(&lpc32xx_gpiochip[i].chip); +} diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/mach-lpc32xx/include/mach/clkdev.h index 1ac4e1682e5c..9bf0637e29ce 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm043.h +++ b/arch/arm/mach-lpc32xx/include/mach/clkdev.h @@ -1,5 +1,9 @@ /* - * Copyright (C) 2008 Sascha Hauer, Pengutronix + * arch/arm/mach-lpc32xx/include/mach/clkdev.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -10,13 +14,12 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__ -#define __ASM_ARCH_MXC_BOARD_PCM043_H__ +#ifndef __ASM_ARCH_CLKDEV_H +#define __ASM_ARCH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) -#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */ +#endif diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S index 383f1c04df06..621744d6b152 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h +++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S @@ -1,5 +1,9 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved + * arch/arm/mach-lpc32xx/include/mach/debug-macro.S + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -10,13 +14,18 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__ +/* + * Debug output is hardcoded to standard UART 5 +*/ + + .macro addruart,rx, tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =0x40090000 + ldrne \rx, =0xF4090000 + .endm -#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */ +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S new file mode 100644 index 000000000000..870227c96602 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S @@ -0,0 +1,47 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/entry-macro.S + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <mach/hardware.h> +#include <mach/platform.h> + +#define LPC32XX_INTC_MASKED_STATUS_OFS 0x8 + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE) + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + +/* + * Return IRQ number in irqnr. Also return processor Z flag status in CPSR + * as set if an interrupt is pending. + */ + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS] + clz \irqnr, \irqstat + rsb \irqnr, \irqnr, #31 + teq \irqstat, #0 + .endm + + .macro irq_prio_table + .endm + diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h new file mode 100644 index 000000000000..67d03da1eee9 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h @@ -0,0 +1,74 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/gpio.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +#include <asm-generic/gpio.h> + +/* + * Note! + * Muxed GP pins need to be setup to the GP state in the board level + * code prior to using this driver. + * GPI pins : 28xP3 group + * GPO pins : 24xP3 group + * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group + */ + +#define LPC32XX_GPIO_P0_MAX 8 +#define LPC32XX_GPIO_P1_MAX 24 +#define LPC32XX_GPIO_P2_MAX 13 +#define LPC32XX_GPIO_P3_MAX 6 +#define LPC32XX_GPI_P3_MAX 28 +#define LPC32XX_GPO_P3_MAX 24 + +#define LPC32XX_GPIO_P0_GRP 0 +#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) +#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) +#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) +#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) +#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) + +/* + * A specific GPIO can be selected with this macro + * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) + * See the LPC32x0 User's guide for GPIO group numbers + */ +#define LPC32XX_GPIO(x, y) ((x) + (y)) + +static inline int gpio_get_value(unsigned gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return __gpio_to_irq(gpio); +} + +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h new file mode 100644 index 000000000000..33e1dde37bd9 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h @@ -0,0 +1,34 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/hardware.h + * + * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* + * Start of virtual addresses for IO devices + */ +#define IO_BASE 0xF0000000 + +/* + * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 + */ +#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\ + IO_BASE) + +#define io_p2v(x) ((void __iomem *) (unsigned long) IO_ADDRESS(x)) +#define io_v2p(x) ((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff)) + +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h new file mode 100644 index 000000000000..034dc9286bcc --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/i2c.h @@ -0,0 +1,63 @@ +/* + * PNX4008-specific tweaks for I2C IP3204 block + * + * Author: Vitaly Wool <vwool@ru.mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_ARCH_I2C_H +#define __ASM_ARCH_I2C_H + +enum { + mstatus_tdi = 0x00000001, + mstatus_afi = 0x00000002, + mstatus_nai = 0x00000004, + mstatus_drmi = 0x00000008, + mstatus_active = 0x00000020, + mstatus_scl = 0x00000040, + mstatus_sda = 0x00000080, + mstatus_rff = 0x00000100, + mstatus_rfe = 0x00000200, + mstatus_tff = 0x00000400, + mstatus_tfe = 0x00000800, +}; + +enum { + mcntrl_tdie = 0x00000001, + mcntrl_afie = 0x00000002, + mcntrl_naie = 0x00000004, + mcntrl_drmie = 0x00000008, + mcntrl_daie = 0x00000020, + mcntrl_rffie = 0x00000040, + mcntrl_tffie = 0x00000080, + mcntrl_reset = 0x00000100, + mcntrl_cdbmode = 0x00000400, +}; + +enum { + rw_bit = 1 << 0, + start_bit = 1 << 8, + stop_bit = 1 << 9, +}; + +#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ +#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ +#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ +#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ +#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ +#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ +#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ +#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ +#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ +#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ +#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ +#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ +#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ + +#define I2C_CHIP_NAME "PNX4008-I2C" + +#endif /* __ASM_ARCH_I2C_H */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/mach-lpc32xx/include/mach/io.h index 13411709b13a..9b59ab5cef89 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm037.h +++ b/arch/arm/mach-lpc32xx/include/mach/io.h @@ -1,5 +1,9 @@ /* - * Copyright (C) 2008 Sascha Hauer, Pengutronix + * arch/arm/mach-lpc32xx/include/mach/io.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -10,13 +14,14 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ -#define __ASM_ARCH_MXC_BOARD_PCM037_H__ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) -#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h new file mode 100644 index 000000000000..2667f52e3b04 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h @@ -0,0 +1,117 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/irqs.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARM_ARCH_IRQS_H +#define __ASM_ARM_ARCH_IRQS_H + +#define LPC32XX_SIC1_IRQ(n) (32 + (n)) +#define LPC32XX_SIC2_IRQ(n) (64 + (n)) + +/* + * MIC interrupts + */ +#define IRQ_LPC32XX_SUB1IRQ 0 +#define IRQ_LPC32XX_SUB2IRQ 1 +#define IRQ_LPC32XX_PWM3 3 +#define IRQ_LPC32XX_PWM4 4 +#define IRQ_LPC32XX_HSTIMER 5 +#define IRQ_LPC32XX_WATCH 6 +#define IRQ_LPC32XX_UART_IIR3 7 +#define IRQ_LPC32XX_UART_IIR4 8 +#define IRQ_LPC32XX_UART_IIR5 9 +#define IRQ_LPC32XX_UART_IIR6 10 +#define IRQ_LPC32XX_FLASH 11 +#define IRQ_LPC32XX_SD1 13 +#define IRQ_LPC32XX_LCD 14 +#define IRQ_LPC32XX_SD0 15 +#define IRQ_LPC32XX_TIMER0 16 +#define IRQ_LPC32XX_TIMER1 17 +#define IRQ_LPC32XX_TIMER2 18 +#define IRQ_LPC32XX_TIMER3 19 +#define IRQ_LPC32XX_SSP0 20 +#define IRQ_LPC32XX_SSP1 21 +#define IRQ_LPC32XX_I2S0 22 +#define IRQ_LPC32XX_I2S1 23 +#define IRQ_LPC32XX_UART_IIR7 24 +#define IRQ_LPC32XX_UART_IIR2 25 +#define IRQ_LPC32XX_UART_IIR1 26 +#define IRQ_LPC32XX_MSTIMER 27 +#define IRQ_LPC32XX_DMA 28 +#define IRQ_LPC32XX_ETHERNET 29 +#define IRQ_LPC32XX_SUB1FIQ 30 +#define IRQ_LPC32XX_SUB2FIQ 31 + +/* + * SIC1 interrupts start at offset 32 + */ +#define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) +#define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) +#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) +#define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) +#define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) +#define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) +#define IRQ_LPC32XX_SPI2 LPC32XX_SIC1_IRQ(12) +#define IRQ_LPC32XX_PLLUSB LPC32XX_SIC1_IRQ(13) +#define IRQ_LPC32XX_PLLHCLK LPC32XX_SIC1_IRQ(14) +#define IRQ_LPC32XX_PLL397 LPC32XX_SIC1_IRQ(17) +#define IRQ_LPC32XX_I2C_2 LPC32XX_SIC1_IRQ(18) +#define IRQ_LPC32XX_I2C_1 LPC32XX_SIC1_IRQ(19) +#define IRQ_LPC32XX_RTC LPC32XX_SIC1_IRQ(20) +#define IRQ_LPC32XX_KEY LPC32XX_SIC1_IRQ(22) +#define IRQ_LPC32XX_SPI1 LPC32XX_SIC1_IRQ(23) +#define IRQ_LPC32XX_SW LPC32XX_SIC1_IRQ(24) +#define IRQ_LPC32XX_USB_OTG_TIMER LPC32XX_SIC1_IRQ(25) +#define IRQ_LPC32XX_USB_OTG_ATX LPC32XX_SIC1_IRQ(26) +#define IRQ_LPC32XX_USB_HOST LPC32XX_SIC1_IRQ(27) +#define IRQ_LPC32XX_USB_DEV_DMA LPC32XX_SIC1_IRQ(28) +#define IRQ_LPC32XX_USB_DEV_LP LPC32XX_SIC1_IRQ(29) +#define IRQ_LPC32XX_USB_DEV_HP LPC32XX_SIC1_IRQ(30) +#define IRQ_LPC32XX_USB_I2C LPC32XX_SIC1_IRQ(31) + +/* + * SIC2 interrupts start at offset 64 + */ +#define IRQ_LPC32XX_GPIO_00 LPC32XX_SIC2_IRQ(0) +#define IRQ_LPC32XX_GPIO_01 LPC32XX_SIC2_IRQ(1) +#define IRQ_LPC32XX_GPIO_02 LPC32XX_SIC2_IRQ(2) +#define IRQ_LPC32XX_GPIO_03 LPC32XX_SIC2_IRQ(3) +#define IRQ_LPC32XX_GPIO_04 LPC32XX_SIC2_IRQ(4) +#define IRQ_LPC32XX_GPIO_05 LPC32XX_SIC2_IRQ(5) +#define IRQ_LPC32XX_SPI2_DATAIN LPC32XX_SIC2_IRQ(6) +#define IRQ_LPC32XX_U2_HCTS LPC32XX_SIC2_IRQ(7) +#define IRQ_LPC32XX_P0_P1_IRQ LPC32XX_SIC2_IRQ(8) +#define IRQ_LPC32XX_GPI_08 LPC32XX_SIC2_IRQ(9) +#define IRQ_LPC32XX_GPI_09 LPC32XX_SIC2_IRQ(10) +#define IRQ_LPC32XX_GPI_19 LPC32XX_SIC2_IRQ(11) +#define IRQ_LPC32XX_U7_HCTS LPC32XX_SIC2_IRQ(12) +#define IRQ_LPC32XX_GPI_07 LPC32XX_SIC2_IRQ(15) +#define IRQ_LPC32XX_SDIO LPC32XX_SIC2_IRQ(18) +#define IRQ_LPC32XX_U5_RX LPC32XX_SIC2_IRQ(19) +#define IRQ_LPC32XX_SPI1_DATAIN LPC32XX_SIC2_IRQ(20) +#define IRQ_LPC32XX_GPI_00 LPC32XX_SIC2_IRQ(22) +#define IRQ_LPC32XX_GPI_01 LPC32XX_SIC2_IRQ(23) +#define IRQ_LPC32XX_GPI_02 LPC32XX_SIC2_IRQ(24) +#define IRQ_LPC32XX_GPI_03 LPC32XX_SIC2_IRQ(25) +#define IRQ_LPC32XX_GPI_04 LPC32XX_SIC2_IRQ(26) +#define IRQ_LPC32XX_GPI_05 LPC32XX_SIC2_IRQ(27) +#define IRQ_LPC32XX_GPI_06 LPC32XX_SIC2_IRQ(28) +#define IRQ_LPC32XX_SYSCLK LPC32XX_SIC2_IRQ(31) + +#define NR_IRQS 96 + +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h new file mode 100644 index 000000000000..044e1acecbe6 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/memory.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/memory.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset of bank 0 + */ +#define PHYS_OFFSET UL(0x80000000) + +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h new file mode 100644 index 000000000000..14ea8d1aadb5 --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -0,0 +1,694 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/platform.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_PLATFORM_H +#define __ASM_ARCH_PLATFORM_H + +#define _SBF(f, v) ((v) << (f)) +#define _BIT(n) _SBF(n, 1) + +/* + * AHB 0 physical base addresses + */ +#define LPC32XX_SLC_BASE 0x20020000 +#define LPC32XX_SSP0_BASE 0x20084000 +#define LPC32XX_SPI1_BASE 0x20088000 +#define LPC32XX_SSP1_BASE 0x2008C000 +#define LPC32XX_SPI2_BASE 0x20090000 +#define LPC32XX_I2S0_BASE 0x20094000 +#define LPC32XX_SD_BASE 0x20098000 +#define LPC32XX_I2S1_BASE 0x2009C000 +#define LPC32XX_MLC_BASE 0x200A8000 +#define LPC32XX_AHB0_START LPC32XX_SLC_BASE +#define LPC32XX_AHB0_SIZE 0x00089000 + +/* + * AHB 1 physical base addresses + */ +#define LPC32XX_DMA_BASE 0x31000000 +#define LPC32XX_USB_BASE 0x31020000 +#define LPC32XX_USBH_BASE 0x31020000 +#define LPC32XX_USB_OTG_BASE 0x31020000 +#define LPC32XX_OTG_I2C_BASE 0x31020300 +#define LPC32XX_LCD_BASE 0x31040000 +#define LPC32XX_ETHERNET_BASE 0x31060000 +#define LPC32XX_EMC_BASE 0x31080000 +#define LPC32XX_ETB_CFG_BASE 0x310C0000 +#define LPC32XX_ETB_DATA_BASE 0x310E0000 +#define LPC32XX_AHB1_START LPC32XX_DMA_BASE +#define LPC32XX_AHB1_SIZE 0x000E1000 + +/* + * FAB physical base addresses + */ +#define LPC32XX_CLK_PM_BASE 0x40004000 +#define LPC32XX_MIC_BASE 0x40008000 +#define LPC32XX_SIC1_BASE 0x4000C000 +#define LPC32XX_SIC2_BASE 0x40010000 +#define LPC32XX_HS_UART1_BASE 0x40014000 +#define LPC32XX_HS_UART2_BASE 0x40018000 +#define LPC32XX_HS_UART7_BASE 0x4001C000 +#define LPC32XX_RTC_BASE 0x40024000 +#define LPC32XX_RTC_RAM_BASE 0x40024080 +#define LPC32XX_GPIO_BASE 0x40028000 +#define LPC32XX_PWM3_BASE 0x4002C000 +#define LPC32XX_PWM4_BASE 0x40030000 +#define LPC32XX_MSTIM_BASE 0x40034000 +#define LPC32XX_HSTIM_BASE 0x40038000 +#define LPC32XX_WDTIM_BASE 0x4003C000 +#define LPC32XX_DEBUG_CTRL_BASE 0x40040000 +#define LPC32XX_TIMER0_BASE 0x40044000 +#define LPC32XX_ADC_BASE 0x40048000 +#define LPC32XX_TIMER1_BASE 0x4004C000 +#define LPC32XX_KSCAN_BASE 0x40050000 +#define LPC32XX_UART_CTRL_BASE 0x40054000 +#define LPC32XX_TIMER2_BASE 0x40058000 +#define LPC32XX_PWM1_BASE 0x4005C000 +#define LPC32XX_PWM2_BASE 0x4005C004 +#define LPC32XX_TIMER3_BASE 0x40060000 + +/* + * APB physical base addresses + */ +#define LPC32XX_UART3_BASE 0x40080000 +#define LPC32XX_UART4_BASE 0x40088000 +#define LPC32XX_UART5_BASE 0x40090000 +#define LPC32XX_UART6_BASE 0x40098000 +#define LPC32XX_I2C1_BASE 0x400A0000 +#define LPC32XX_I2C2_BASE 0x400A8000 + +/* + * FAB and APB base and sizing + */ +#define LPC32XX_FABAPB_START LPC32XX_CLK_PM_BASE +#define LPC32XX_FABAPB_SIZE 0x000A5000 + +/* + * Internal memory bases and sizes + */ +#define LPC32XX_IRAM_BASE 0x08000000 +#define LPC32XX_IROM_BASE 0x0C000000 + +/* + * External Static Memory Bank Address Space Bases + */ +#define LPC32XX_EMC_CS0_BASE 0xE0000000 +#define LPC32XX_EMC_CS1_BASE 0xE1000000 +#define LPC32XX_EMC_CS2_BASE 0xE2000000 +#define LPC32XX_EMC_CS3_BASE 0xE3000000 + +/* + * External SDRAM Memory Bank Address Space Bases + */ +#define LPC32XX_EMC_DYCS0_BASE 0x80000000 +#define LPC32XX_EMC_DYCS1_BASE 0xA0000000 + +/* + * Clock and crystal information + */ +#define LPC32XX_MAIN_OSC_FREQ 13000000 +#define LPC32XX_CLOCK_OSC_FREQ 32768 + +/* + * Clock and Power control register offsets + */ +#define _PMREG(x) io_p2v(LPC32XX_CLK_PM_BASE +\ + (x)) +#define LPC32XX_CLKPWR_DEBUG_CTRL _PMREG(0x000) +#define LPC32XX_CLKPWR_BOOTMAP _PMREG(0x014) +#define LPC32XX_CLKPWR_P01_ER _PMREG(0x018) +#define LPC32XX_CLKPWR_USBCLK_PDIV _PMREG(0x01C) +#define LPC32XX_CLKPWR_INT_ER _PMREG(0x020) +#define LPC32XX_CLKPWR_INT_RS _PMREG(0x024) +#define LPC32XX_CLKPWR_INT_SR _PMREG(0x028) +#define LPC32XX_CLKPWR_INT_AP _PMREG(0x02C) +#define LPC32XX_CLKPWR_PIN_ER _PMREG(0x030) +#define LPC32XX_CLKPWR_PIN_RS _PMREG(0x034) +#define LPC32XX_CLKPWR_PIN_SR _PMREG(0x038) +#define LPC32XX_CLKPWR_PIN_AP _PMREG(0x03C) +#define LPC32XX_CLKPWR_HCLK_DIV _PMREG(0x040) +#define LPC32XX_CLKPWR_PWR_CTRL _PMREG(0x044) +#define LPC32XX_CLKPWR_PLL397_CTRL _PMREG(0x048) +#define LPC32XX_CLKPWR_MAIN_OSC_CTRL _PMREG(0x04C) +#define LPC32XX_CLKPWR_SYSCLK_CTRL _PMREG(0x050) +#define LPC32XX_CLKPWR_LCDCLK_CTRL _PMREG(0x054) +#define LPC32XX_CLKPWR_HCLKPLL_CTRL _PMREG(0x058) +#define LPC32XX_CLKPWR_ADC_CLK_CTRL_1 _PMREG(0x060) +#define LPC32XX_CLKPWR_USB_CTRL _PMREG(0x064) +#define LPC32XX_CLKPWR_SDRAMCLK_CTRL _PMREG(0x068) +#define LPC32XX_CLKPWR_DDR_LAP_NOM _PMREG(0x06C) +#define LPC32XX_CLKPWR_DDR_LAP_COUNT _PMREG(0x070) +#define LPC32XX_CLKPWR_DDR_LAP_DELAY _PMREG(0x074) +#define LPC32XX_CLKPWR_SSP_CLK_CTRL _PMREG(0x078) +#define LPC32XX_CLKPWR_I2S_CLK_CTRL _PMREG(0x07C) +#define LPC32XX_CLKPWR_MS_CTRL _PMREG(0x080) +#define LPC32XX_CLKPWR_MACCLK_CTRL _PMREG(0x090) +#define LPC32XX_CLKPWR_TEST_CLK_SEL _PMREG(0x0A4) +#define LPC32XX_CLKPWR_SFW_INT _PMREG(0x0A8) +#define LPC32XX_CLKPWR_I2C_CLK_CTRL _PMREG(0x0AC) +#define LPC32XX_CLKPWR_KEY_CLK_CTRL _PMREG(0x0B0) +#define LPC32XX_CLKPWR_ADC_CLK_CTRL _PMREG(0x0B4) +#define LPC32XX_CLKPWR_PWM_CLK_CTRL _PMREG(0x0B8) +#define LPC32XX_CLKPWR_TIMER_CLK_CTRL _PMREG(0x0BC) +#define LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1 _PMREG(0x0C0) +#define LPC32XX_CLKPWR_SPI_CLK_CTRL _PMREG(0x0C4) +#define LPC32XX_CLKPWR_NAND_CLK_CTRL _PMREG(0x0C8) +#define LPC32XX_CLKPWR_UART3_CLK_CTRL _PMREG(0x0D0) +#define LPC32XX_CLKPWR_UART4_CLK_CTRL _PMREG(0x0D4) +#define LPC32XX_CLKPWR_UART5_CLK_CTRL _PMREG(0x0D8) +#define LPC32XX_CLKPWR_UART6_CLK_CTRL _PMREG(0x0DC) +#define LPC32XX_CLKPWR_IRDA_CLK_CTRL _PMREG(0x0E0) +#define LPC32XX_CLKPWR_UART_CLK_CTRL _PMREG(0x0E4) +#define LPC32XX_CLKPWR_DMA_CLK_CTRL _PMREG(0x0E8) +#define LPC32XX_CLKPWR_AUTOCLOCK _PMREG(0x0EC) +#define LPC32XX_CLKPWR_DEVID(x) _PMREG(0x130 + (x)) + +/* + * clkpwr_debug_ctrl register definitions +*/ +#define LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT _BIT(4) + +/* + * clkpwr_bootmap register definitions + */ +#define LPC32XX_CLKPWR_BOOTMAP_SEL_BIT _BIT(1) + +/* + * clkpwr_start_gpio register bit definitions + */ +#define LPC32XX_CLKPWR_GPIOSRC_P1IO23_BIT _BIT(31) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO22_BIT _BIT(30) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO21_BIT _BIT(29) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO20_BIT _BIT(28) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO19_BIT _BIT(27) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO18_BIT _BIT(26) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO17_BIT _BIT(25) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO16_BIT _BIT(24) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO15_BIT _BIT(23) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO14_BIT _BIT(22) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO13_BIT _BIT(21) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO12_BIT _BIT(20) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO11_BIT _BIT(19) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO10_BIT _BIT(18) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO9_BIT _BIT(17) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO8_BIT _BIT(16) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO7_BIT _BIT(15) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO6_BIT _BIT(14) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO5_BIT _BIT(13) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO4_BIT _BIT(12) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO3_BIT _BIT(11) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO2_BIT _BIT(10) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO1_BIT _BIT(9) +#define LPC32XX_CLKPWR_GPIOSRC_P1IO0_BIT _BIT(8) +#define LPC32XX_CLKPWR_GPIOSRC_P0IO7_BIT _BIT(7) +#define LPC32XX_CLKPWR_GPIOSRC_P0IO6_BIT _BIT(6) +#define LPC32XX_CLKPWR_GPIOSRC_P0IO5_BIT _BIT(5) +#define LPC32XX_CLKPWR_GPIOSRC_P0IO4_BIT _BIT(4) +#define LPC32XX_CLKPWR_GPIOSRC_P0IO3_BIT _BIT(3) +#define LPC32XX_CLKPWR_GPIOSRC_P0IO2_BIT _BIT(2) +#define LPC32XX_CLKPWR_GPIOSRC_P0IO1_BIT _BIT(1) +#define LPC32XX_CLKPWR_GPIOSRC_P0IO0_BIT _BIT(0) + +/* + * clkpwr_usbclk_pdiv register definitions + */ +#define LPC32XX_CLKPWR_USBPDIV_PLL_MASK 0xF + +/* + * clkpwr_start_int, clkpwr_start_raw_sts_int, clkpwr_start_sts_int, + * clkpwr_start_pol_int, register bit definitions + */ +#define LPC32XX_CLKPWR_INTSRC_ADC_BIT _BIT(31) +#define LPC32XX_CLKPWR_INTSRC_TS_P_BIT _BIT(30) +#define LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT _BIT(29) +#define LPC32XX_CLKPWR_INTSRC_USBAHNEEDCLK_BIT _BIT(26) +#define LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT _BIT(25) +#define LPC32XX_CLKPWR_INTSRC_RTC_BIT _BIT(24) +#define LPC32XX_CLKPWR_INTSRC_USBNEEDCLK_BIT _BIT(23) +#define LPC32XX_CLKPWR_INTSRC_USB_BIT _BIT(22) +#define LPC32XX_CLKPWR_INTSRC_I2C_BIT _BIT(21) +#define LPC32XX_CLKPWR_INTSRC_USBOTGTIMER_BIT _BIT(20) +#define LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT _BIT(19) +#define LPC32XX_CLKPWR_INTSRC_KEY_BIT _BIT(16) +#define LPC32XX_CLKPWR_INTSRC_MAC_BIT _BIT(7) +#define LPC32XX_CLKPWR_INTSRC_P0P1_BIT _BIT(6) +#define LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT _BIT(5) +#define LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT _BIT(4) +#define LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT _BIT(3) +#define LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT _BIT(2) +#define LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT _BIT(1) +#define LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT _BIT(0) + +/* + * clkpwr_start_pin, clkpwr_start_raw_sts_pin, clkpwr_start_sts_pin, + * clkpwr_start_pol_pin register bit definitions + */ +#define LPC32XX_CLKPWR_EXTSRC_U7_RX_BIT _BIT(31) +#define LPC32XX_CLKPWR_EXTSRC_U7_HCTS_BIT _BIT(30) +#define LPC32XX_CLKPWR_EXTSRC_U6_IRRX_BIT _BIT(28) +#define LPC32XX_CLKPWR_EXTSRC_U5_RX_BIT _BIT(26) +#define LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT _BIT(25) +#define LPC32XX_CLKPWR_EXTSRC_U3_RX_BIT _BIT(24) +#define LPC32XX_CLKPWR_EXTSRC_U2_HCTS_BIT _BIT(23) +#define LPC32XX_CLKPWR_EXTSRC_U2_RX_BIT _BIT(22) +#define LPC32XX_CLKPWR_EXTSRC_U1_RX_BIT _BIT(21) +#define LPC32XX_CLKPWR_EXTSRC_MSDIO_INT_BIT _BIT(18) +#define LPC32XX_CLKPWR_EXTSRC_MSDIO_SRT_BIT _BIT(17) +#define LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT _BIT(16) +#define LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT _BIT(15) +#define LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT _BIT(14) +#define LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT _BIT(13) +#define LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT _BIT(12) +#define LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT _BIT(11) +#define LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT _BIT(10) +#define LPC32XX_CLKPWR_EXTSRC_SYSCLKEN_BIT _BIT(9) +#define LPC32XX_CLKPWR_EXTSRC_SPI1_DATIN_BIT _BIT(8) +#define LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT _BIT(7) +#define LPC32XX_CLKPWR_EXTSRC_SPI2_DATIN_BIT _BIT(6) +#define LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT _BIT(5) +#define LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT _BIT(4) +#define LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT _BIT(3) + +/* + * clkpwr_hclk_div register definitions + */ +#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_STOP (0x0 << 7) +#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_NORM (0x1 << 7) +#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_HALF (0x2 << 7) +#define LPC32XX_CLKPWR_HCLKDIV_PCLK_DIV(n) (((n) & 0x1F) << 2) +#define LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(n) ((n) & 0x3) + +/* + * clkpwr_pwr_ctrl register definitions + */ +#define LPC32XX_CLKPWR_CTRL_FORCE_PCLK _BIT(10) +#define LPC32XX_CLKPWR_SDRAM_SELF_RFSH _BIT(9) +#define LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH _BIT(8) +#define LPC32XX_CLKPWR_AUTO_SDRAM_SELF_RFSH _BIT(7) +#define LPC32XX_CLKPWR_HIGHCORE_STATE_BIT _BIT(5) +#define LPC32XX_CLKPWR_SYSCLKEN_STATE_BIT _BIT(4) +#define LPC32XX_CLKPWR_SYSCLKEN_GPIO_EN _BIT(3) +#define LPC32XX_CLKPWR_SELECT_RUN_MODE _BIT(2) +#define LPC32XX_CLKPWR_HIGHCORE_GPIO_EN _BIT(1) +#define LPC32XX_CLKPWR_STOP_MODE_CTRL _BIT(0) + +/* + * clkpwr_pll397_ctrl register definitions + */ +#define LPC32XX_CLKPWR_PLL397_MSLOCK_STS _BIT(10) +#define LPC32XX_CLKPWR_PLL397_BYPASS _BIT(9) +#define LPC32XX_CLKPWR_PLL397_BIAS_NORM 0x000 +#define LPC32XX_CLKPWR_PLL397_BIAS_N12_5 0x040 +#define LPC32XX_CLKPWR_PLL397_BIAS_N25 0x080 +#define LPC32XX_CLKPWR_PLL397_BIAS_N37_5 0x0C0 +#define LPC32XX_CLKPWR_PLL397_BIAS_P12_5 0x100 +#define LPC32XX_CLKPWR_PLL397_BIAS_P25 0x140 +#define LPC32XX_CLKPWR_PLL397_BIAS_P37_5 0x180 +#define LPC32XX_CLKPWR_PLL397_BIAS_P50 0x1C0 +#define LPC32XX_CLKPWR_PLL397_BIAS_MASK 0x1C0 +#define LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS _BIT(1) +#define LPC32XX_CLKPWR_SYSCTRL_PLL397_STS _BIT(0) + +/* + * clkpwr_main_osc_ctrl register definitions + */ +#define LPC32XX_CLKPWR_MOSC_ADD_CAP(n) (((n) & 0x7F) << 2) +#define LPC32XX_CLKPWR_MOSC_CAP_MASK (0x7F << 2) +#define LPC32XX_CLKPWR_TEST_MODE _BIT(1) +#define LPC32XX_CLKPWR_MOSC_DISABLE _BIT(0) + +/* + * clkpwr_sysclk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_SYSCTRL_BP_TRIG(n) (((n) & 0x3FF) << 2) +#define LPC32XX_CLKPWR_SYSCTRL_BP_MASK (0x3FF << 2) +#define LPC32XX_CLKPWR_SYSCTRL_USEPLL397 _BIT(1) +#define LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX _BIT(0) + +/* + * clkpwr_lcdclk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT12 0x000 +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16 0x040 +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT15 0x080 +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT24 0x0C0 +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN4M 0x100 +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN8C 0x140 +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN4M 0x180 +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN8C 0x1C0 +#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK 0x01C0 +#define LPC32XX_CLKPWR_LCDCTRL_CLK_EN 0x020 +#define LPC32XX_CLKPWR_LCDCTRL_SET_PSCALE(n) ((n - 1) & 0x1F) +#define LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK 0x001F + +/* + * clkpwr_hclkpll_ctrl register definitions + */ +#define LPC32XX_CLKPWR_HCLKPLL_POWER_UP _BIT(16) +#define LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS _BIT(15) +#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS _BIT(14) +#define LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK _BIT(13) +#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(n) (((n) & 0x3) << 11) +#define LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(n) (((n) & 0x3) << 9) +#define LPC32XX_CLKPWR_HCLKPLL_PLLM(n) (((n) & 0xFF) << 1) +#define LPC32XX_CLKPWR_HCLKPLL_PLL_STS _BIT(0) + +/* + * clkpwr_adc_clk_ctrl_1 register definitions + */ +#define LPC32XX_CLKPWR_ADCCTRL1_RTDIV(n) (((n) & 0xFF) << 0) +#define LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL _BIT(8) + +/* + * clkpwr_usb_ctrl register definitions + */ +#define LPC32XX_CLKPWR_USBCTRL_HCLK_EN _BIT(24) +#define LPC32XX_CLKPWR_USBCTRL_USBI2C_EN _BIT(23) +#define LPC32XX_CLKPWR_USBCTRL_USBDVND_EN _BIT(22) +#define LPC32XX_CLKPWR_USBCTRL_USBHSTND_EN _BIT(21) +#define LPC32XX_CLKPWR_USBCTRL_PU_ADD (0x0 << 19) +#define LPC32XX_CLKPWR_USBCTRL_BUS_KEEPER (0x1 << 19) +#define LPC32XX_CLKPWR_USBCTRL_PD_ADD (0x3 << 19) +#define LPC32XX_CLKPWR_USBCTRL_CLK_EN2 _BIT(18) +#define LPC32XX_CLKPWR_USBCTRL_CLK_EN1 _BIT(17) +#define LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP _BIT(16) +#define LPC32XX_CLKPWR_USBCTRL_CCO_BYPASS _BIT(15) +#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_BYPASS _BIT(14) +#define LPC32XX_CLKPWR_USBCTRL_FDBK_SEL_FCLK _BIT(13) +#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_2POW(n) (((n) & 0x3) << 11) +#define LPC32XX_CLKPWR_USBCTRL_PREDIV_PLUS1(n) (((n) & 0x3) << 9) +#define LPC32XX_CLKPWR_USBCTRL_FDBK_PLUS1(n) (((n) & 0xFF) << 1) +#define LPC32XX_CLKPWR_USBCTRL_PLL_STS _BIT(0) + +/* + * clkpwr_sdramclk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_CLK _BIT(22) +#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW _BIT(21) +#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_DAT _BIT(20) +#define LPC32XX_CLKPWR_SDRCLK_SW_DDR_RESET _BIT(19) +#define LPC32XX_CLKPWR_SDRCLK_HCLK_DLY(n) (((n) & 0x1F) << 14) +#define LPC32XX_CLKPWR_SDRCLK_DLY_ADDR_STS _BIT(13) +#define LPC32XX_CLKPWR_SDRCLK_SENS_FACT(n) (((n) & 0x7) << 10) +#define LPC32XX_CLKPWR_SDRCLK_USE_CAL _BIT(9) +#define LPC32XX_CLKPWR_SDRCLK_DO_CAL _BIT(8) +#define LPC32XX_CLKPWR_SDRCLK_CAL_ON_RTC _BIT(7) +#define LPC32XX_CLKPWR_SDRCLK_DQS_DLY(n) (((n) & 0x1F) << 2) +#define LPC32XX_CLKPWR_SDRCLK_USE_DDR _BIT(1) +#define LPC32XX_CLKPWR_SDRCLK_CLK_DIS _BIT(0) + +/* + * clkpwr_ssp_blk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1RX _BIT(5) +#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1TX _BIT(4) +#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0RX _BIT(3) +#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0TX _BIT(2) +#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN _BIT(1) +#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN _BIT(0) + +/* + * clkpwr_i2s_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_I2SCTRL_I2S1_RX_FOR_TX _BIT(6) +#define LPC32XX_CLKPWR_I2SCTRL_I2S1_TX_FOR_RX _BIT(5) +#define LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA _BIT(4) +#define LPC32XX_CLKPWR_I2SCTRL_I2S0_RX_FOR_TX _BIT(3) +#define LPC32XX_CLKPWR_I2SCTRL_I2S0_TX_FOR_RX _BIT(2) +#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN _BIT(1) +#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN _BIT(0) + +/* + * clkpwr_ms_ctrl register definitions + */ +#define LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS _BIT(10) +#define LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN _BIT(9) +#define LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS _BIT(8) +#define LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS _BIT(7) +#define LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS _BIT(6) +#define LPC32XX_CLKPWR_MSCARD_SDCARD_EN _BIT(5) +#define LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(n) ((n) & 0xF) + +/* + * clkpwr_macclk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_MACCTRL_NO_ENET_PIS 0x00 +#define LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS 0x08 +#define LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS 0x18 +#define LPC32XX_CLKPWR_MACCTRL_PINS_MSK 0x18 +#define LPC32XX_CLKPWR_MACCTRL_DMACLK_EN _BIT(2) +#define LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN _BIT(1) +#define LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN _BIT(0) + +/* + * clkpwr_test_clk_sel register definitions + */ +#define LPC32XX_CLKPWR_TESTCLK1_SEL_PERCLK (0x0 << 5) +#define LPC32XX_CLKPWR_TESTCLK1_SEL_RTC (0x1 << 5) +#define LPC32XX_CLKPWR_TESTCLK1_SEL_MOSC (0x2 << 5) +#define LPC32XX_CLKPWR_TESTCLK1_SEL_MASK (0x3 << 5) +#define LPC32XX_CLKPWR_TESTCLK_TESTCLK1_EN _BIT(4) +#define LPC32XX_CLKPWR_TESTCLK2_SEL_HCLK (0x0 << 1) +#define LPC32XX_CLKPWR_TESTCLK2_SEL_PERCLK (0x1 << 1) +#define LPC32XX_CLKPWR_TESTCLK2_SEL_USBCLK (0x2 << 1) +#define LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC (0x5 << 1) +#define LPC32XX_CLKPWR_TESTCLK2_SEL_PLL397 (0x7 << 1) +#define LPC32XX_CLKPWR_TESTCLK2_SEL_MASK (0x7 << 1) +#define LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN _BIT(0) + +/* + * clkpwr_sw_int register definitions + */ +#define LPC32XX_CLKPWR_SW_INT(n) (_BIT(0) | (((n) & 0x7F) << 1)) +#define LPC32XX_CLKPWR_SW_GET_ARG(n) (((n) & 0xFE) >> 1) + +/* + * clkpwr_i2c_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE _BIT(4) +#define LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE _BIT(3) +#define LPC32XX_CLKPWR_I2CCLK_I2C1HI_DRIVE _BIT(2) +#define LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN _BIT(1) +#define LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN _BIT(0) + +/* + * clkpwr_key_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN 0x1 + +/* + * clkpwr_adc_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN 0x1 + +/* + * clkpwr_pwm_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(n) (((n) & 0xF) << 8) +#define LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(n) (((n) & 0xF) << 4) +#define LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK 0x8 +#define LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN 0x4 +#define LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK 0x2 +#define LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN 0x1 + +/* + * clkpwr_timer_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_PWMCLK_HSTIMER_EN 0x2 +#define LPC32XX_CLKPWR_PWMCLK_WDOG_EN 0x1 + +/* + * clkpwr_timers_pwms_clk_ctrl_1 register definitions + */ +#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN 0x20 +#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN 0x10 +#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN 0x08 +#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN 0x04 +#define LPC32XX_CLKPWR_TMRPWMCLK_PWM4_EN 0x02 +#define LPC32XX_CLKPWR_TMRPWMCLK_PWM3_EN 0x01 + +/* + * clkpwr_spi_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_SPICLK_SET_SPI2DATIO 0x80 +#define LPC32XX_CLKPWR_SPICLK_SET_SPI2CLK 0x40 +#define LPC32XX_CLKPWR_SPICLK_USE_SPI2 0x20 +#define LPC32XX_CLKPWR_SPICLK_SPI2CLK_EN 0x10 +#define LPC32XX_CLKPWR_SPICLK_SET_SPI1DATIO 0x08 +#define LPC32XX_CLKPWR_SPICLK_SET_SPI1CLK 0x04 +#define LPC32XX_CLKPWR_SPICLK_USE_SPI1 0x02 +#define LPC32XX_CLKPWR_SPICLK_SPI1CLK_EN 0x01 + +/* + * clkpwr_nand_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC 0x20 +#define LPC32XX_CLKPWR_NANDCLK_DMA_RNB 0x10 +#define LPC32XX_CLKPWR_NANDCLK_DMA_INT 0x08 +#define LPC32XX_CLKPWR_NANDCLK_SEL_SLC 0x04 +#define LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN 0x02 +#define LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN 0x01 + +/* + * clkpwr_uart3_clk_ctrl, clkpwr_uart4_clk_ctrl, clkpwr_uart5_clk_ctrl + * and clkpwr_uart6_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_UART_Y_DIV(y) ((y) & 0xFF) +#define LPC32XX_CLKPWR_UART_X_DIV(x) (((x) & 0xFF) << 8) +#define LPC32XX_CLKPWR_UART_USE_HCLK _BIT(16) + +/* + * clkpwr_irda_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_IRDA_Y_DIV(y) ((y) & 0xFF) +#define LPC32XX_CLKPWR_IRDA_X_DIV(x) (((x) & 0xFF) << 8) + +/* + * clkpwr_uart_clk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN _BIT(3) +#define LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN _BIT(2) +#define LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN _BIT(1) +#define LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN _BIT(0) + +/* + * clkpwr_dmaclk_ctrl register definitions + */ +#define LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN 0x1 + +/* + * clkpwr_autoclock register definitions + */ +#define LPC32XX_CLKPWR_AUTOCLK_USB_EN 0x40 +#define LPC32XX_CLKPWR_AUTOCLK_IRAM_EN 0x02 +#define LPC32XX_CLKPWR_AUTOCLK_IROM_EN 0x01 + +/* + * Interrupt controller register offsets + */ +#define LPC32XX_INTC_MASK(x) io_p2v((x) + 0x00) +#define LPC32XX_INTC_RAW_STAT(x) io_p2v((x) + 0x04) +#define LPC32XX_INTC_STAT(x) io_p2v((x) + 0x08) +#define LPC32XX_INTC_POLAR(x) io_p2v((x) + 0x0C) +#define LPC32XX_INTC_ACT_TYPE(x) io_p2v((x) + 0x10) +#define LPC32XX_INTC_TYPE(x) io_p2v((x) + 0x14) + +/* + * Timer/counter register offsets + */ +#define LCP32XX_TIMER_IR(x) io_p2v((x) + 0x00) +#define LCP32XX_TIMER_TCR(x) io_p2v((x) + 0x04) +#define LCP32XX_TIMER_TC(x) io_p2v((x) + 0x08) +#define LCP32XX_TIMER_PR(x) io_p2v((x) + 0x0C) +#define LCP32XX_TIMER_PC(x) io_p2v((x) + 0x10) +#define LCP32XX_TIMER_MCR(x) io_p2v((x) + 0x14) +#define LCP32XX_TIMER_MR0(x) io_p2v((x) + 0x18) +#define LCP32XX_TIMER_MR1(x) io_p2v((x) + 0x1C) +#define LCP32XX_TIMER_MR2(x) io_p2v((x) + 0x20) +#define LCP32XX_TIMER_MR3(x) io_p2v((x) + 0x24) +#define LCP32XX_TIMER_CCR(x) io_p2v((x) + 0x28) +#define LCP32XX_TIMER_CR0(x) io_p2v((x) + 0x2C) +#define LCP32XX_TIMER_CR1(x) io_p2v((x) + 0x30) +#define LCP32XX_TIMER_CR2(x) io_p2v((x) + 0x34) +#define LCP32XX_TIMER_CR3(x) io_p2v((x) + 0x38) +#define LCP32XX_TIMER_EMR(x) io_p2v((x) + 0x3C) +#define LCP32XX_TIMER_CTCR(x) io_p2v((x) + 0x70) + +/* + * ir register definitions + */ +#define LCP32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3)) +#define LCP32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3))) + +/* + * tcr register definitions + */ +#define LCP32XX_TIMER_CNTR_TCR_EN 0x1 +#define LCP32XX_TIMER_CNTR_TCR_RESET 0x2 + +/* + * mcr register definitions + */ +#define LCP32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3)) +#define LCP32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1)) +#define LCP32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2)) + +/* + * Standard UART register offsets + */ +#define LPC32XX_UART_DLL_FIFO(x) io_p2v((x) + 0x00) +#define LPC32XX_UART_DLM_IER(x) io_p2v((x) + 0x04) +#define LPC32XX_UART_IIR_FCR(x) io_p2v((x) + 0x08) +#define LPC32XX_UART_LCR(x) io_p2v((x) + 0x0C) +#define LPC32XX_UART_MODEM_CTRL(x) io_p2v((x) + 0x10) +#define LPC32XX_UART_LSR(x) io_p2v((x) + 0x14) +#define LPC32XX_UART_MODEM_STATUS(x) io_p2v((x) + 0x18) +#define LPC32XX_UART_RXLEV(x) io_p2v((x) + 0x1C) + +/* + * UART control structure offsets + */ +#define _UCREG(x) io_p2v(\ + LPC32XX_UART_CTRL_BASE + (x)) +#define LPC32XX_UARTCTL_CTRL _UCREG(0x00) +#define LPC32XX_UARTCTL_CLKMODE _UCREG(0x04) +#define LPC32XX_UARTCTL_CLOOP _UCREG(0x08) + +/* + * ctrl register definitions + */ +#define LPC32XX_UART_U3_MD_CTRL_EN _BIT(11) +#define LPC32XX_UART_IRRX6_INV_EN _BIT(10) +#define LPC32XX_UART_HDPX_EN _BIT(9) +#define LPC32XX_UART_UART6_IRDAMOD_BYPASS _BIT(5) +#define LPC32XX_RT_IRTX6_INV_EN _BIT(4) +#define LPC32XX_RT_IRTX6_INV_MIR_EN _BIT(3) +#define LPC32XX_RT_RX_IRPULSE_3_16_115K _BIT(2) +#define LPC32XX_RT_TX_IRPULSE_3_16_115K _BIT(1) +#define LPC32XX_UART_U5_ROUTE_TO_USB _BIT(0) + +/* + * clkmode register definitions + */ +#define LPC32XX_UART_ENABLED_CLOCKS(n) (((n) >> 16) & 0x7F) +#define LPC32XX_UART_ENABLED_CLOCK(n, u) (((n) >> (16 + (u))) & 0x1) +#define LPC32XX_UART_ENABLED_CLKS_ANY _BIT(14) +#define LPC32XX_UART_CLKMODE_OFF 0x0 +#define LPC32XX_UART_CLKMODE_ON 0x1 +#define LPC32XX_UART_CLKMODE_AUTO 0x2 +#define LPC32XX_UART_CLKMODE_MASK(u) (0x3 << ((((u) - 3) * 2) + 4)) +#define LPC32XX_UART_CLKMODE_LOAD(m, u) ((m) << ((((u) - 3) * 2) + 4)) + +/* + * GPIO Module Register offsets + */ +#define _GPREG(x) io_p2v(LPC32XX_GPIO_BASE + (x)) +#define LPC32XX_GPIO_P_MUX_SET _GPREG(0x100) +#define LPC32XX_GPIO_P_MUX_CLR _GPREG(0x104) +#define LPC32XX_GPIO_P_MUX_STATE _GPREG(0x108) +#define LPC32XX_GPIO_P3_MUX_SET _GPREG(0x110) +#define LPC32XX_GPIO_P3_MUX_CLR _GPREG(0x114) +#define LPC32XX_GPIO_P3_MUX_STATE _GPREG(0x118) +#define LPC32XX_GPIO_P0_MUX_SET _GPREG(0x120) +#define LPC32XX_GPIO_P0_MUX_CLR _GPREG(0x124) +#define LPC32XX_GPIO_P0_MUX_STATE _GPREG(0x128) +#define LPC32XX_GPIO_P1_MUX_SET _GPREG(0x130) +#define LPC32XX_GPIO_P1_MUX_CLR _GPREG(0x134) +#define LPC32XX_GPIO_P1_MUX_STATE _GPREG(0x138) + +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h new file mode 100644 index 000000000000..df3b0dea4d7b --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/system.h @@ -0,0 +1,52 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/system.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + extern void lpc32xx_watchdog_reset(void); + + switch (mode) { + case 's': + case 'h': + printk(KERN_CRIT "RESET: Rebooting system\n"); + + /* Disable interrupts */ + local_irq_disable(); + + lpc32xx_watchdog_reset(); + break; + + default: + /* Do nothing */ + break; + } + + /* Wait for watchdog to reset system */ + while (1) + ; +} + +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h new file mode 100644 index 000000000000..8d4066b16b3f --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/timex.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/timex.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* + * Rate in Hz of the main system oscillator. This value should match + * the value 'MAIN_OSC_FREQ' in platform.h + */ +#define CLOCK_TICK_RATE 13000000 + +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h new file mode 100644 index 000000000000..c142487d299a --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h @@ -0,0 +1,60 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/uncompress.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H +#define __ASM_ARM_ARCH_UNCOMPRESS_H + +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +/* + * Uncompress output is hardcoded to standard UART 5 + */ + +#define UART_FIFO_CTL_TX_RESET (1 << 2) +#define UART_STATUS_TX_MT (1 << 6) + +#define _UARTREG(x) (void __iomem *)(LPC32XX_UART5_BASE + (x)) + +#define LPC32XX_UART_DLLFIFO_O 0x00 +#define LPC32XX_UART_IIRFCR_O 0x08 +#define LPC32XX_UART_LSR_O 0x14 + +static inline void putc(int ch) +{ + /* Wait for transmit FIFO to empty */ + while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) & + UART_STATUS_TX_MT) == 0) + ; + + __raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O)); +} + +static inline void flush(void) +{ + __raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) | + UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O)); +} + +/* NULL functions; we don't presently need them */ +#define arch_decomp_setup() +#define arch_decomp_wdog() + +#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h new file mode 100644 index 000000000000..d1d936c7236d --- /dev/null +++ b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/vmalloc.h + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END 0xF0000000 + +#endif diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c new file mode 100644 index 000000000000..bd0df26c415b --- /dev/null +++ b/arch/arm/mach-lpc32xx/irq.c @@ -0,0 +1,432 @@ +/* + * arch/arm/mach-lpc32xx/irq.c + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/irqs.h> +#include <mach/hardware.h> +#include <mach/platform.h> +#include "common.h" + +/* + * Default value representing the Activation polarity of all internal + * interrupt sources + */ +#define MIC_APR_DEFAULT 0x3FF0EFE0 +#define SIC1_APR_DEFAULT 0xFBD27186 +#define SIC2_APR_DEFAULT 0x801810C0 + +/* + * Default value representing the Activation Type of all internal + * interrupt sources. All are level sensitive. + */ +#define MIC_ATR_DEFAULT 0x00000000 +#define SIC1_ATR_DEFAULT 0x00026000 +#define SIC2_ATR_DEFAULT 0x00000000 + +struct lpc32xx_event_group_regs { + void __iomem *enab_reg; + void __iomem *edge_reg; + void __iomem *maskstat_reg; + void __iomem *rawstat_reg; +}; + +static const struct lpc32xx_event_group_regs lpc32xx_event_int_regs = { + .enab_reg = LPC32XX_CLKPWR_INT_ER, + .edge_reg = LPC32XX_CLKPWR_INT_AP, + .maskstat_reg = LPC32XX_CLKPWR_INT_SR, + .rawstat_reg = LPC32XX_CLKPWR_INT_RS, +}; + +static const struct lpc32xx_event_group_regs lpc32xx_event_pin_regs = { + .enab_reg = LPC32XX_CLKPWR_PIN_ER, + .edge_reg = LPC32XX_CLKPWR_PIN_AP, + .maskstat_reg = LPC32XX_CLKPWR_PIN_SR, + .rawstat_reg = LPC32XX_CLKPWR_PIN_RS, +}; + +struct lpc32xx_event_info { + const struct lpc32xx_event_group_regs *event_group; + u32 mask; +}; + +/* + * Maps an IRQ number to and event mask and register + */ +static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { + [IRQ_LPC32XX_GPI_08] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT, + }, + [IRQ_LPC32XX_GPI_09] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT, + }, + [IRQ_LPC32XX_GPI_19] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT, + }, + [IRQ_LPC32XX_GPI_07] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT, + }, + [IRQ_LPC32XX_GPI_00] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT, + }, + [IRQ_LPC32XX_GPI_01] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT, + }, + [IRQ_LPC32XX_GPI_02] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT, + }, + [IRQ_LPC32XX_GPI_03] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT, + }, + [IRQ_LPC32XX_GPI_04] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT, + }, + [IRQ_LPC32XX_GPI_05] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT, + }, + [IRQ_LPC32XX_GPI_06] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, + }, + [IRQ_LPC32XX_GPIO_00] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, + }, + [IRQ_LPC32XX_GPIO_01] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT, + }, + [IRQ_LPC32XX_GPIO_02] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT, + }, + [IRQ_LPC32XX_GPIO_03] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT, + }, + [IRQ_LPC32XX_GPIO_04] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT, + }, + [IRQ_LPC32XX_GPIO_05] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT, + }, + [IRQ_LPC32XX_KEY] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT, + }, + [IRQ_LPC32XX_USB_OTG_ATX] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT, + }, + [IRQ_LPC32XX_USB_HOST] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_USB_BIT, + }, + [IRQ_LPC32XX_RTC] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_RTC_BIT, + }, + [IRQ_LPC32XX_MSTIMER] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT, + }, + [IRQ_LPC32XX_TS_AUX] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT, + }, + [IRQ_LPC32XX_TS_P] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_TS_P_BIT, + }, + [IRQ_LPC32XX_TS_IRQ] = { + .event_group = &lpc32xx_event_int_regs, + .mask = LPC32XX_CLKPWR_INTSRC_ADC_BIT, + }, +}; + +static void get_controller(unsigned int irq, unsigned int *base, + unsigned int *irqbit) +{ + if (irq < 32) { + *base = LPC32XX_MIC_BASE; + *irqbit = 1 << irq; + } else if (irq < 64) { + *base = LPC32XX_SIC1_BASE; + *irqbit = 1 << (irq - 32); + } else { + *base = LPC32XX_SIC2_BASE; + *irqbit = 1 << (irq - 64); + } +} + +static void lpc32xx_mask_irq(unsigned int irq) +{ + unsigned int reg, ctrl, mask; + + get_controller(irq, &ctrl, &mask); + + reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask; + __raw_writel(reg, LPC32XX_INTC_MASK(ctrl)); +} + +static void lpc32xx_unmask_irq(unsigned int irq) +{ + unsigned int reg, ctrl, mask; + + get_controller(irq, &ctrl, &mask); + + reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask; + __raw_writel(reg, LPC32XX_INTC_MASK(ctrl)); +} + +static void lpc32xx_ack_irq(unsigned int irq) +{ + unsigned int ctrl, mask; + + get_controller(irq, &ctrl, &mask); + + __raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl)); + + /* Also need to clear pending wake event */ + if (lpc32xx_events[irq].mask != 0) + __raw_writel(lpc32xx_events[irq].mask, + lpc32xx_events[irq].event_group->rawstat_reg); +} + +static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level, + int use_edge) +{ + unsigned int reg, ctrl, mask; + + get_controller(irq, &ctrl, &mask); + + /* Activation level, high or low */ + reg = __raw_readl(LPC32XX_INTC_POLAR(ctrl)); + if (use_high_level) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, LPC32XX_INTC_POLAR(ctrl)); + + /* Activation type, edge or level */ + reg = __raw_readl(LPC32XX_INTC_ACT_TYPE(ctrl)); + if (use_edge) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, LPC32XX_INTC_ACT_TYPE(ctrl)); + + /* Use same polarity for the wake events */ + if (lpc32xx_events[irq].mask != 0) { + reg = __raw_readl(lpc32xx_events[irq].event_group->edge_reg); + + if (use_high_level) + reg |= lpc32xx_events[irq].mask; + else + reg &= ~lpc32xx_events[irq].mask; + + __raw_writel(reg, lpc32xx_events[irq].event_group->edge_reg); + } +} + +static int lpc32xx_set_irq_type(unsigned int irq, unsigned int type) +{ + switch (type) { + case IRQ_TYPE_EDGE_RISING: + /* Rising edge sensitive */ + __lpc32xx_set_irq_type(irq, 1, 1); + break; + + case IRQ_TYPE_EDGE_FALLING: + /* Falling edge sensitive */ + __lpc32xx_set_irq_type(irq, 0, 1); + break; + + case IRQ_TYPE_LEVEL_LOW: + /* Low level sensitive */ + __lpc32xx_set_irq_type(irq, 0, 0); + break; + + case IRQ_TYPE_LEVEL_HIGH: + /* High level sensitive */ + __lpc32xx_set_irq_type(irq, 1, 0); + break; + + /* Other modes are not supported */ + default: + return -EINVAL; + } + + /* Ok to use the level handler for all types */ + set_irq_handler(irq, handle_level_irq); + + return 0; +} + +static int lpc32xx_irq_wake(unsigned int irqno, unsigned int state) +{ + unsigned long eventreg; + + if (lpc32xx_events[irqno].mask != 0) { + eventreg = __raw_readl(lpc32xx_events[irqno]. + event_group->enab_reg); + + if (state) + eventreg |= lpc32xx_events[irqno].mask; + else + eventreg &= ~lpc32xx_events[irqno].mask; + + __raw_writel(eventreg, + lpc32xx_events[irqno].event_group->enab_reg); + + return 0; + } + + /* Clear event */ + __raw_writel(lpc32xx_events[irqno].mask, + lpc32xx_events[irqno].event_group->rawstat_reg); + + return -ENODEV; +} + +static void __init lpc32xx_set_default_mappings(unsigned int apr, + unsigned int atr, unsigned int offset) +{ + unsigned int i; + + /* Set activation levels for each interrupt */ + i = 0; + while (i < 32) { + __lpc32xx_set_irq_type(offset + i, ((apr >> i) & 0x1), + ((atr >> i) & 0x1)); + i++; + } +} + +static struct irq_chip lpc32xx_irq_chip = { + .ack = lpc32xx_ack_irq, + .mask = lpc32xx_mask_irq, + .unmask = lpc32xx_unmask_irq, + .set_type = lpc32xx_set_irq_type, + .set_wake = lpc32xx_irq_wake +}; + +static void lpc32xx_sic1_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC1_BASE)); + + while (ints != 0) { + int irqno = fls(ints) - 1; + + ints &= ~(1 << irqno); + + generic_handle_irq(LPC32XX_SIC1_IRQ(irqno)); + } +} + +static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC2_BASE)); + + while (ints != 0) { + int irqno = fls(ints) - 1; + + ints &= ~(1 << irqno); + + generic_handle_irq(LPC32XX_SIC2_IRQ(irqno)); + } +} + +void __init lpc32xx_init_irq(void) +{ + unsigned int i; + + /* Setup MIC */ + __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); + __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_MIC_BASE)); + __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_MIC_BASE)); + + /* Setup SIC1 */ + __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); + __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); + __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); + + /* Setup SIC2 */ + __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); + __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); + __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); + + /* Configure supported IRQ's */ + for (i = 0; i < NR_IRQS; i++) { + set_irq_chip(i, &lpc32xx_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + + /* Set default mappings */ + lpc32xx_set_default_mappings(MIC_APR_DEFAULT, MIC_ATR_DEFAULT, 0); + lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32); + lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64); + + /* mask all interrupts except SUBIRQ */ + __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE)); + __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); + __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); + + /* MIC SUBIRQx interrupts will route handling to the chain handlers */ + set_irq_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler); + set_irq_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler); + + /* Initially disable all wake events */ + __raw_writel(0, LPC32XX_CLKPWR_P01_ER); + __raw_writel(0, LPC32XX_CLKPWR_INT_ER); + __raw_writel(0, LPC32XX_CLKPWR_PIN_ER); + + /* + * Default wake activation polarities, all pin sources are low edge + * triggered + */ + __raw_writel(LPC32XX_CLKPWR_INTSRC_TS_P_BIT | + LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT | + LPC32XX_CLKPWR_INTSRC_RTC_BIT, + LPC32XX_CLKPWR_INT_AP); + __raw_writel(0, LPC32XX_CLKPWR_PIN_AP); + + /* Clear latched wake event states */ + __raw_writel(__raw_readl(LPC32XX_CLKPWR_PIN_RS), + LPC32XX_CLKPWR_PIN_RS); + __raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS), + LPC32XX_CLKPWR_INT_RS); +} diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c new file mode 100644 index 000000000000..bc9a42da2145 --- /dev/null +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -0,0 +1,397 @@ +/* + * arch/arm/mach-lpc32xx/phy3250.c + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/dma-mapping.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <linux/amba/pl022.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/hardware.h> +#include <mach/platform.h> +#include "common.h" + +/* + * Mapped GPIOLIB GPIOs + */ +#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) +#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) +#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) +#define LED_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1) + +/* + * AMBA LCD controller + */ +static struct clcd_panel conn_lcd_panel = { + .mode = { + .name = "QVGA portrait", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 191828, + .left_margin = 22, + .right_margin = 11, + .upper_margin = 2, + .lower_margin = 1, + .hsync_len = 5, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = (TIM2_IVS | TIM2_IHS), + .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) | + CNTL_LCDBPP16_565), + .bpp = 16, +}; +#define PANEL_SIZE (3 * SZ_64K) + +static int lpc32xx_clcd_setup(struct clcd_fb *fb) +{ + dma_addr_t dma; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, + PANEL_SIZE, &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = PANEL_SIZE; + fb->panel = &conn_lcd_panel; + + if (gpio_request(LCD_POWER_GPIO, "LCD power")) + printk(KERN_ERR "Error requesting gpio %u", + LCD_POWER_GPIO); + else if (gpio_direction_output(LCD_POWER_GPIO, 1)) + printk(KERN_ERR "Error setting gpio %u to output", + LCD_POWER_GPIO); + + if (gpio_request(BKL_POWER_GPIO, "LCD backlight power")) + printk(KERN_ERR "Error requesting gpio %u", + BKL_POWER_GPIO); + else if (gpio_direction_output(BKL_POWER_GPIO, 1)) + printk(KERN_ERR "Error setting gpio %u to output", + BKL_POWER_GPIO); + + return 0; +} + +static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +static void lpc32xx_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +/* + * On some early LCD modules (1307.0), the backlight logic is inverted. + * For those board variants, swap the disable and enable states for + * BKL_POWER_GPIO. +*/ +static void clcd_disable(struct clcd_fb *fb) +{ + gpio_set_value(BKL_POWER_GPIO, 0); + gpio_set_value(LCD_POWER_GPIO, 0); +} + +static void clcd_enable(struct clcd_fb *fb) +{ + gpio_set_value(BKL_POWER_GPIO, 1); + gpio_set_value(LCD_POWER_GPIO, 1); +} + +static struct clcd_board lpc32xx_clcd_data = { + .name = "Phytec LCD", + .check = clcdfb_check, + .decode = clcdfb_decode, + .disable = clcd_disable, + .enable = clcd_enable, + .setup = lpc32xx_clcd_setup, + .mmap = lpc32xx_clcd_mmap, + .remove = lpc32xx_clcd_remove, +}; + +static struct amba_device lpc32xx_clcd_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "dev:clcd", + .platform_data = &lpc32xx_clcd_data, + }, + .res = { + .start = LPC32XX_LCD_BASE, + .end = (LPC32XX_LCD_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + .dma_mask = ~0, + .irq = {IRQ_LPC32XX_LCD, NO_IRQ}, +}; + +/* + * AMBA SSP (SPI) + */ +static void phy3250_spi_cs_set(u32 control) +{ + gpio_set_value(SPI0_CS_GPIO, (int) control); +} + +static struct pl022_config_chip spi0_chip_info = { + .lbm = LOOPBACK_DISABLED, + .com_mode = INTERRUPT_TRANSFER, + .iface = SSP_INTERFACE_MOTOROLA_SPI, + .hierarchy = SSP_MASTER, + .slave_tx_disable = 0, + .endian_tx = SSP_TX_LSB, + .endian_rx = SSP_RX_LSB, + .data_size = SSP_DATA_BITS_8, + .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, + .clk_phase = SSP_CLK_FIRST_EDGE, + .clk_pol = SSP_CLK_POL_IDLE_LOW, + .ctrl_len = SSP_BITS_8, + .wait_state = SSP_MWIRE_WAIT_ZERO, + .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, + .cs_control = phy3250_spi_cs_set, +}; + +static struct pl022_ssp_controller lpc32xx_ssp0_data = { + .bus_id = 0, + .num_chipselect = 1, + .enable_dma = 0, +}; + +static struct amba_device lpc32xx_ssp0_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "dev:ssp0", + .platform_data = &lpc32xx_ssp0_data, + }, + .res = { + .start = LPC32XX_SSP0_BASE, + .end = (LPC32XX_SSP0_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + .dma_mask = ~0, + .irq = {IRQ_LPC32XX_SSP0, NO_IRQ}, +}; + +/* AT25 driver registration */ +static int __init phy3250_spi_board_register(void) +{ +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + static struct spi_board_info info[] = { + { + .modalias = "spidev", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 0, + .controller_data = &spi0_chip_info, + }, + }; + +#else + static struct spi_eeprom eeprom = { + .name = "at25256a", + .byte_len = 0x8000, + .page_size = 64, + .flags = EE_ADDR2, + }; + + static struct spi_board_info info[] = { + { + .modalias = "at25", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &eeprom, + .controller_data = &spi0_chip_info, + }, + }; +#endif + return spi_register_board_info(info, ARRAY_SIZE(info)); +} +arch_initcall(phy3250_spi_board_register); + +static struct i2c_board_info __initdata phy3250_i2c_board_info[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +static struct gpio_led phy_leds[] = { + { + .name = "led0", + .gpio = LED_GPIO, + .active_low = 1, + .default_trigger = "heartbeat", + }, +}; + +static struct gpio_led_platform_data led_data = { + .leds = phy_leds, + .num_leds = ARRAY_SIZE(phy_leds), +}; + +static struct platform_device lpc32xx_gpio_led_device = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &led_data, +}; + +static struct platform_device *phy3250_devs[] __initdata = { + &lpc32xx_i2c0_device, + &lpc32xx_i2c1_device, + &lpc32xx_i2c2_device, + &lpc32xx_watchdog_device, + &lpc32xx_gpio_led_device, +}; + +static struct amba_device *amba_devs[] __initdata = { + &lpc32xx_clcd_device, + &lpc32xx_ssp0_device, +}; + +/* + * Board specific functions + */ +static void __init phy3250_board_init(void) +{ + u32 tmp; + int i; + + lpc32xx_gpio_init(); + + /* Register GPIOs used on this board */ + if (gpio_request(SPI0_CS_GPIO, "spi0 cs")) + printk(KERN_ERR "Error requesting gpio %u", + SPI0_CS_GPIO); + else if (gpio_direction_output(SPI0_CS_GPIO, 1)) + printk(KERN_ERR "Error setting gpio %u to output", + SPI0_CS_GPIO); + + /* Setup network interface for RMII mode */ + tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL); + tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK; + tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS; + __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL); + + /* Setup SLC NAND controller muxing */ + __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC, + LPC32XX_CLKPWR_NAND_CLK_CTRL); + + /* Setup LCD muxing to RGB565 */ + tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) & + ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK | + LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK); + tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16; + __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL); + + /* Set up I2C pull levels */ + tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); + tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE | + LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE; + __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); + + /* Disable IrDA pulsing support on UART6 */ + tmp = __raw_readl(LPC32XX_UARTCTL_CTRL); + tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS; + __raw_writel(tmp, LPC32XX_UARTCTL_CTRL); + + /* Enable DMA for I2S1 channel */ + tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL); + tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA; + __raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL); + + lpc32xx_serial_init(); + + /* + * AMBA peripheral clocks need to be enabled prior to AMBA device + * detection or a data fault will occur, so enable the clocks + * here. However, we don't want to enable them if the peripheral + * isn't included in the image + */ +#ifdef CONFIG_FB_ARMCLCD + tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); + __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN), + LPC32XX_CLKPWR_LCDCLK_CTRL); +#endif +#ifdef CONFIG_SPI_PL022 + tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL); + __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN), + LPC32XX_CLKPWR_SSP_CLK_CTRL); +#endif + + platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs)); + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + + /* Test clock needed for UDA1380 initial init */ + __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC | + LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN, + LPC32XX_CLKPWR_TEST_CLK_SEL); + + i2c_register_board_info(0, phy3250_i2c_board_info, + ARRAY_SIZE(phy3250_i2c_board_info)); +} + +static int __init lpc32xx_display_uid(void) +{ + u32 uid[4]; + + lpc32xx_get_uid(uid); + + printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n", + uid[3], uid[2], uid[1], uid[0]); + + return 1; +} +arch_initcall(lpc32xx_display_uid); + +MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller") + /* Maintainer: Kevin Wells, NXP Semiconductors */ + .phys_io = LPC32XX_UART5_BASE, + .io_pg_offst = ((IO_ADDRESS(LPC32XX_UART5_BASE))>>18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = lpc32xx_map_io, + .init_irq = lpc32xx_init_irq, + .timer = &lpc32xx_timer, + .init_machine = phy3250_board_init, +MACHINE_END diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c new file mode 100644 index 000000000000..a6e2aed9a49f --- /dev/null +++ b/arch/arm/mach-lpc32xx/pm.c @@ -0,0 +1,146 @@ +/* + * arch/arm/mach-lpc32xx/pm.c + * + * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> + * Modified by Kevin Wells <kevin.wells@nxp.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +/* + * LPC32XX CPU and system power management + * + * The LCP32XX has three CPU modes for controlling system power: run, + * direct-run, and halt modes. When switching between halt and run modes, + * the CPU transistions through direct-run mode. For Linux, direct-run + * mode is not used in normal operation. Halt mode is used when the + * system is fully suspended. + * + * Run mode: + * The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are + * derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from + * the HCLK_PLL rate. Linux runs in this mode. + * + * Direct-run mode: + * The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from + * SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK + * source or the frequency of the main oscillator. In this mode, the + * HCLK_PLL can be safely enabled, changed, or disabled. + * + * Halt mode: + * SYSCLK is gated off and the CPU and system clocks are halted. + * Peripherals based on the 32KHz oscillator clock (ie, RTC, touch, + * key scanner, etc.) still operate if enabled. In this state, an enabled + * system event (ie, GPIO state change, RTC match, key press, etc.) will + * wake the system up back into direct-run mode. + * + * DRAM refresh + * DRAM clocking and refresh are slightly different for systems with DDR + * DRAM or regular SDRAM devices. If SDRAM is used in the system, the + * SDRAM will still be accessible in direct-run mode. In DDR based systems, + * a transistion to direct-run mode will stop all DDR accesses (no clocks). + * Because of this, the code to switch power modes and the code to enter + * and exit DRAM self-refresh modes must not be executed in DRAM. A small + * section of IRAM is used instead for this. + * + * Suspend is handled with the following logic: + * Backup a small area of IRAM used for the suspend code + * Copy suspend code to IRAM + * Transfer control to code in IRAM + * Places DRAMs in self-refresh mode + * Enter direct-run mode + * Save state of HCLK_PLL PLL + * Disable HCLK_PLL PLL + * Enter halt mode - CPU and buses will stop + * System enters direct-run mode when an enabled event occurs + * HCLK PLL state is restored + * Run mode is entered + * DRAMS are placed back into normal mode + * Code execution returns from IRAM + * IRAM code are used for suspend is restored + * Suspend mode is exited + */ + +#include <linux/suspend.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <asm/cacheflush.h> + +#include <mach/hardware.h> +#include <mach/platform.h> +#include "common.h" +#include "clock.h" + +#define TEMP_IRAM_AREA IO_ADDRESS(LPC32XX_IRAM_BASE) + +/* + * Both STANDBY and MEM suspend states are handled the same with no + * loss of CPU or memory state + */ +static int lpc32xx_pm_enter(suspend_state_t state) +{ + int (*lpc32xx_suspend_ptr) (void); + void *iram_swap_area; + + /* Allocate some space for temporary IRAM storage */ + iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL); + if (!iram_swap_area) { + printk(KERN_ERR + "PM Suspend: cannot allocate memory to save portion " + "of SRAM\n"); + return -ENOMEM; + } + + /* Backup a small area of IRAM used for the suspend code */ + memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA, + lpc32xx_sys_suspend_sz); + + /* + * Copy code to suspend system into IRAM. The suspend code + * needs to run from IRAM as DRAM may no longer be available + * when the PLL is stopped. + */ + memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend, + lpc32xx_sys_suspend_sz); + flush_icache_range((unsigned long)TEMP_IRAM_AREA, + (unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz); + + /* Transfer to suspend code in IRAM */ + lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA; + flush_cache_all(); + (void) lpc32xx_suspend_ptr(); + + /* Restore original IRAM contents */ + memcpy((void *) TEMP_IRAM_AREA, iram_swap_area, + lpc32xx_sys_suspend_sz); + + kfree(iram_swap_area); + + return 0; +} + +static struct platform_suspend_ops lpc32xx_pm_ops = { + .valid = suspend_valid_only_mem, + .enter = lpc32xx_pm_enter, +}; + +#define EMC_DYN_MEM_CTRL_OFS 0x20 +#define EMC_SRMMC (1 << 3) +#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS) +static int __init lpc32xx_pm_init(void) +{ + /* + * Setup SDRAM self-refresh clock to automatically disable o + * start of self-refresh. This only needs to be done once. + */ + __raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG); + + suspend_set_ops(&lpc32xx_pm_ops); + + return 0; +} +arch_initcall(lpc32xx_pm_init); diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c new file mode 100644 index 000000000000..429cfdbb2b3d --- /dev/null +++ b/arch/arm/mach-lpc32xx/serial.c @@ -0,0 +1,190 @@ +/* + * arch/arm/mach-lpc32xx/serial.c + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> +#include <linux/serial_8250.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/platform.h> +#include "common.h" + +#define LPC32XX_SUART_FIFO_SIZE 64 + +/* Standard 8250/16550 compatible serial ports */ +static struct plat_serial8250_port serial_std_platform_data[] = { +#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT + { + .membase = io_p2v(LPC32XX_UART5_BASE), + .mapbase = LPC32XX_UART5_BASE, + .irq = IRQ_LPC32XX_UART_IIR5, + .uartclk = LPC32XX_MAIN_OSC_FREQ, + .regshift = 2, + .iotype = UPIO_MEM32, + .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | + UPF_SKIP_TEST, + }, +#endif +#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT + { + .membase = io_p2v(LPC32XX_UART3_BASE), + .mapbase = LPC32XX_UART3_BASE, + .irq = IRQ_LPC32XX_UART_IIR3, + .uartclk = LPC32XX_MAIN_OSC_FREQ, + .regshift = 2, + .iotype = UPIO_MEM32, + .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | + UPF_SKIP_TEST, + }, +#endif +#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT + { + .membase = io_p2v(LPC32XX_UART4_BASE), + .mapbase = LPC32XX_UART4_BASE, + .irq = IRQ_LPC32XX_UART_IIR4, + .uartclk = LPC32XX_MAIN_OSC_FREQ, + .regshift = 2, + .iotype = UPIO_MEM32, + .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | + UPF_SKIP_TEST, + }, +#endif +#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT + { + .membase = io_p2v(LPC32XX_UART6_BASE), + .mapbase = LPC32XX_UART6_BASE, + .irq = IRQ_LPC32XX_UART_IIR6, + .uartclk = LPC32XX_MAIN_OSC_FREQ, + .regshift = 2, + .iotype = UPIO_MEM32, + .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | + UPF_SKIP_TEST, + }, +#endif + { }, +}; + +struct uartinit { + char *uart_ck_name; + u32 ck_mode_mask; + void __iomem *pdiv_clk_reg; +}; + +static struct uartinit uartinit_data[] __initdata = { +#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT + { + .uart_ck_name = "uart5_ck", + .ck_mode_mask = + LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), + .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, + }, +#endif +#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT + { + .uart_ck_name = "uart3_ck", + .ck_mode_mask = + LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), + .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, + }, +#endif +#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT + { + .uart_ck_name = "uart4_ck", + .ck_mode_mask = + LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), + .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, + }, +#endif +#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT + { + .uart_ck_name = "uart6_ck", + .ck_mode_mask = + LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), + .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, + }, +#endif +}; + +static struct platform_device serial_std_platform_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_std_platform_data, + }, +}; + +static struct platform_device *lpc32xx_serial_devs[] __initdata = { + &serial_std_platform_device, +}; + +void __init lpc32xx_serial_init(void) +{ + u32 tmp, clkmodes = 0; + struct clk *clk; + unsigned int puart; + int i, j; + + /* UART clocks are off, let clock driver manage them */ + __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL); + + for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { + clk = clk_get(NULL, uartinit_data[i].uart_ck_name); + if (!IS_ERR(clk)) { + clk_enable(clk); + serial_std_platform_data[i].uartclk = + clk_get_rate(clk); + } + + /* Fall back on main osc rate if clock rate return fails */ + if (serial_std_platform_data[i].uartclk == 0) + serial_std_platform_data[i].uartclk = + LPC32XX_MAIN_OSC_FREQ; + + /* Setup UART clock modes for all UARTs, disable autoclock */ + clkmodes |= uartinit_data[i].ck_mode_mask; + + /* pre-UART clock divider set to 1 */ + __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); + } + + /* This needs to be done after all UART clocks are setup */ + __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); + for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { + /* Force a flush of the RX FIFOs to work around a HW bug */ + puart = serial_std_platform_data[i].mapbase; + __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); + __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); + j = LPC32XX_SUART_FIFO_SIZE; + while (j--) + tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart)); + __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); + } + + /* Disable UART5->USB transparent mode or USB won't work */ + tmp = __raw_readl(LPC32XX_UARTCTL_CTRL); + tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB; + __raw_writel(tmp, LPC32XX_UARTCTL_CTRL); + + platform_add_devices(lpc32xx_serial_devs, + ARRAY_SIZE(lpc32xx_serial_devs)); +} diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S new file mode 100644 index 000000000000..374f9f07fe48 --- /dev/null +++ b/arch/arm/mach-lpc32xx/suspend.S @@ -0,0 +1,151 @@ +/* + * arch/arm/mach-lpc32xx/suspend.S + * + * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com> + * Modified by Kevin Wells <kevin.wells@nxp.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/platform.h> +#include <mach/hardware.h> + +/* Using named register defines makes the code easier to follow */ +#define WORK1_REG r0 +#define WORK2_REG r1 +#define SAVED_HCLK_DIV_REG r2 +#define SAVED_HCLK_PLL_REG r3 +#define SAVED_DRAM_CLKCTRL_REG r4 +#define SAVED_PWR_CTRL_REG r5 +#define CLKPWRBASE_REG r6 +#define EMCBASE_REG r7 + +#define LPC32XX_EMC_STATUS_OFFS 0x04 +#define LPC32XX_EMC_STATUS_BUSY 0x1 +#define LPC32XX_EMC_STATUS_SELF_RFSH 0x4 + +#define LPC32XX_CLKPWR_PWR_CTRL_OFFS 0x44 +#define LPC32XX_CLKPWR_HCLK_DIV_OFFS 0x40 +#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58 + +#define CLKPWR_PCLK_DIV_MASK 0xFFFFFE7F + + .text + +ENTRY(lpc32xx_sys_suspend) + @ Save a copy of the used registers in IRAM, r0 is corrupted + adr r0, tmp_stack_end + stmfd r0!, {r3 - r7, sp, lr} + + @ Load a few common register addresses + adr WORK1_REG, reg_bases + ldr CLKPWRBASE_REG, [WORK1_REG, #0] + ldr EMCBASE_REG, [WORK1_REG, #4] + + ldr SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\ + #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + orr WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH + + @ Wait for SDRAM busy status to go busy and then idle + @ This guarantees a small windows where DRAM isn't busy +1: + ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS] + and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY + cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY + bne 1b @ Branch while idle +2: + ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS] + and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY + cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY + beq 2b @ Branch until idle + + @ Setup self-refresh with support for manual exit of + @ self-refresh mode + str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + orr WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH + str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + + @ Wait for self-refresh acknowledge, clocks to the DRAM device + @ will automatically stop on start of self-refresh +3: + ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS] + and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH + cmp WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH + bne 3b @ Branch until self-refresh mode starts + + @ Enter direct-run mode from run mode + bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE + str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + + @ Safe disable of DRAM clock in EMC block, prevents DDR sync + @ issues on restart + ldr SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\ + #LPC32XX_CLKPWR_HCLK_DIV_OFFS] + and WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK + str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS] + + @ Save HCLK PLL state and disable HCLK PLL + ldr SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\ + #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS] + bic WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP + str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS] + + @ Enter stop mode until an enabled event occurs + orr WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL + str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + .rept 9 + nop + .endr + + @ Clear stop status + bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL + + @ Restore original HCLK PLL value and wait for PLL lock + str SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\ + #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS] +4: + ldr WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS] + and WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS + bne 4b + + @ Re-enter run mode with self-refresh flag cleared, but no DRAM + @ update yet. DRAM is still in self-refresh + str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\ + #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + + @ Restore original DRAM clock mode to restore DRAM clocks + str SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\ + #LPC32XX_CLKPWR_HCLK_DIV_OFFS] + + @ Clear self-refresh mode + orr WORK1_REG, SAVED_PWR_CTRL_REG,\ + #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH + str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\ + #LPC32XX_CLKPWR_PWR_CTRL_OFFS] + + @ Wait for EMC to clear self-refresh mode +5: + ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS] + and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH + bne 5b @ Branch until self-refresh has exited + + @ restore regs and return + adr r0, tmp_stack + ldmfd r0!, {r3 - r7, sp, pc} + +reg_bases: + .long IO_ADDRESS(LPC32XX_CLK_PM_BASE) + .long IO_ADDRESS(LPC32XX_EMC_BASE) + +tmp_stack: + .long 0, 0, 0, 0, 0, 0, 0 +tmp_stack_end: + +ENTRY(lpc32xx_sys_suspend_sz) + .word . - lpc32xx_sys_suspend diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c new file mode 100644 index 000000000000..630dd4a74b26 --- /dev/null +++ b/arch/arm/mach-lpc32xx/timer.c @@ -0,0 +1,182 @@ +/* + * arch/arm/mach-lpc32xx/timer.c + * + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2009 - 2010 NXP Semiconductors + * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven + * Ed Schouten <e.schouten@fontys.nl> + * Laurens Timmermans <l.timmermans@fontys.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/time.h> +#include <linux/err.h> +#include <linux/clockchips.h> + +#include <asm/mach/time.h> + +#include <mach/hardware.h> +#include <mach/platform.h> +#include "common.h" + +static cycle_t lpc32xx_clksrc_read(struct clocksource *cs) +{ + return (cycle_t)__raw_readl(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE)); +} + +static struct clocksource lpc32xx_clksrc = { + .name = "lpc32xx_clksrc", + .shift = 24, + .rating = 300, + .read = lpc32xx_clksrc_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int lpc32xx_clkevt_next_event(unsigned long delta, + struct clock_event_device *dev) +{ + __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET, + LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); + __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, + LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + + return 0; +} + +static void lpc32xx_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *dev) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + WARN_ON(1); + break; + + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_SHUTDOWN: + /* + * Disable the timer. When using oneshot, we must also + * disable the timer to wait for the first call to + * set_next_event(). + */ + __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device lpc32xx_clkevt = { + .name = "lpc32xx_clkevt", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 300, + .set_next_event = lpc32xx_clkevt_next_event, + .set_mode = lpc32xx_clkevt_mode, +}; + +static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &lpc32xx_clkevt; + + /* Clear match */ + __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0), + LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction lpc32xx_timer_irq = { + .name = "LPC32XX Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = lpc32xx_timer_interrupt, +}; + +/* + * The clock management driver isn't initialized at this point, so the + * clocks need to be enabled here manually and then tagged as used in + * the clock driver initialization + */ +static void __init lpc32xx_timer_init(void) +{ + u32 clkrate, pllreg; + + /* Enable timer clock */ + __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN | + LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, + LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1); + + /* + * The clock driver isn't initialized at this point. So determine if + * the SYSCLK is driven from the PLL397 or main oscillator and then use + * it to compute the PLL frequency and the PCLK divider to get the base + * timer rates. This rate is needed to compute the tick rate. + */ + if (clk_is_sysclk_mainosc() != 0) + clkrate = LPC32XX_MAIN_OSC_FREQ; + else + clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ; + + /* Get ARM HCLKPLL register and convert it into a frequency */ + pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; + clkrate = clk_get_pllrate_from_reg(clkrate, pllreg); + + /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */ + clkrate = clkrate / clk_get_pclk_div(); + + /* Initial timer setup */ + __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); + __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0), + LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); + __raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); + __raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) | + LCP32XX_TIMER_CNTR_MCR_STOP(0) | + LCP32XX_TIMER_CNTR_MCR_RESET(0), + LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); + + /* Setup tick interrupt */ + setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); + + /* Setup the clockevent structure. */ + lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC, + lpc32xx_clkevt.shift); + lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1, + &lpc32xx_clkevt); + lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1, + &lpc32xx_clkevt) + 1; + lpc32xx_clkevt.cpumask = cpumask_of(0); + clockevents_register_device(&lpc32xx_clkevt); + + /* Use timer1 as clock source. */ + __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET, + LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); + __raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); + __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); + __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, + LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); + lpc32xx_clksrc.mult = clocksource_hz2mult(clkrate, + lpc32xx_clksrc.shift); + clocksource_register(&lpc32xx_clksrc); +} + +struct sys_timer lpc32xx_timer = { + .init = &lpc32xx_timer_init, +}; + diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 66677f0acaed..7ff8020d4d24 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_ARCH_QSD8X50) += sirc.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o -obj-$(CONFIG_MACH_TROUT) += board-trout.o devices-msm7x00.o +obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o devices-msm7x00.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c new file mode 100644 index 000000000000..523d213bf79e --- /dev/null +++ b/arch/arm/mach-msm/board-trout-gpio.c @@ -0,0 +1,112 @@ +/* + * linux/arch/arm/mach-msm/gpio.c + * + * Copyright (C) 2005 HP Labs + * Copyright (C) 2008 Google, Inc. + * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include "board-trout.h" + +struct msm_gpio_chip { + struct gpio_chip chip; + void __iomem *reg; /* Base of register bank */ + u8 shadow; +}; + +#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip) + +static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip); + unsigned mask = 1 << offset; + + return !!(readb(msm_gpio->reg) & mask); +} + +static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip); + unsigned mask = 1 << offset; + + if (val) + msm_gpio->shadow |= mask; + else + msm_gpio->shadow &= ~mask; + + writeb(msm_gpio->shadow, msm_gpio->reg); +} + +static int msm_gpiolib_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + msm_gpiolib_set(chip, offset, 0); + return 0; +} + +static int msm_gpiolib_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + msm_gpiolib_set(chip, offset, val); + return 0; +} + +#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \ + { \ + .chip = { \ + .label = name, \ + .direction_input = msm_gpiolib_direction_input,\ + .direction_output = msm_gpiolib_direction_output, \ + .get = msm_gpiolib_get, \ + .set = msm_gpiolib_set, \ + .base = base_gpio, \ + .ngpio = 8, \ + }, \ + .reg = (void *) reg_num + TROUT_CPLD_BASE, \ + .shadow = shadow_val, \ + } + +static struct msm_gpio_chip msm_gpio_banks[] = { +#if defined(CONFIG_MSM_DEBUG_UART1) + /* H2W pins <-> UART1 */ + TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40), +#else + /* H2W pins <-> UART3, Bluetooth <-> UART1 */ + TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x80), +#endif + /* I2C pull */ + TROUT_GPIO_BANK("MISC3", 0x02, TROUT_GPIO_MISC3_BASE, 0x04), + TROUT_GPIO_BANK("MISC4", 0x04, TROUT_GPIO_MISC4_BASE, 0), + /* mmdi 32k en */ + TROUT_GPIO_BANK("MISC5", 0x06, TROUT_GPIO_MISC5_BASE, 0x04), + TROUT_GPIO_BANK("INT2", 0x08, TROUT_GPIO_INT2_BASE, 0), + TROUT_GPIO_BANK("MISC1", 0x0a, TROUT_GPIO_MISC1_BASE, 0), + TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0), +}; + +/* + * Called from the processor-specific init to enable GPIO pin support. + */ +int __init trout_init_gpio(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++) + gpiochip_add(&msm_gpio_banks[i].chip); + + return 0; +} + +postcore_initcall(trout_init_gpio); + diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index dca5a5f062dc..e69a1502e4e8 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -50,7 +50,6 @@ static void __init trout_fixup(struct machine_desc *desc, struct tag *tags, { mi->nr_banks = 1; mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); mi->bank[0].size = (101*1024*1024); } diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h index 4f345a5a0a61..651851c3e1dd 100644 --- a/arch/arm/mach-msm/board-trout.h +++ b/arch/arm/mach-msm/board-trout.h @@ -1,5 +1,162 @@ +/* linux/arch/arm/mach-msm/board-trout.h +** Author: Brian Swetland <swetland@google.com> +*/ +#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H +#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H + +#include <mach/board.h> + +#define MSM_SMI_BASE 0x00000000 +#define MSM_SMI_SIZE 0x00800000 + +#define MSM_EBI_BASE 0x10000000 +#define MSM_EBI_SIZE 0x06e00000 + +#define MSM_PMEM_GPU0_BASE 0x00000000 +#define MSM_PMEM_GPU0_SIZE 0x00700000 + +#define MSM_PMEM_MDP_BASE 0x02000000 +#define MSM_PMEM_MDP_SIZE 0x00800000 + +#define MSM_PMEM_ADSP_BASE 0x02800000 +#define MSM_PMEM_ADSP_SIZE 0x00800000 + +#define MSM_PMEM_CAMERA_BASE 0x03000000 +#define MSM_PMEM_CAMERA_SIZE 0x00800000 + +#define MSM_FB_BASE 0x03800000 +#define MSM_FB_SIZE 0x00100000 + +#define MSM_LINUX_BASE MSM_EBI_BASE +#define MSM_LINUX_SIZE 0x06500000 + +#define MSM_PMEM_GPU1_SIZE 0x800000 +#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE) + +#define MSM_RAM_CONSOLE_BASE (MSM_EBI_BASE + 0x6d00000) +#define MSM_RAM_CONSOLE_SIZE (128 * SZ_1K) + +#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE) +#error invalid memory map +#endif + +#define DECLARE_MSM_IOMAP +#include <mach/msm_iomap.h> + +#define TROUT_4_BALL_UP_0 1 +#define TROUT_4_BALL_LEFT_0 18 +#define TROUT_4_BALL_DOWN_0 57 +#define TROUT_4_BALL_RIGHT_0 91 + +#define TROUT_5_BALL_UP_0 94 +#define TROUT_5_BALL_LEFT_0 18 +#define TROUT_5_BALL_DOWN_0 90 +#define TROUT_5_BALL_RIGHT_0 19 + +#define TROUT_POWER_KEY 20 + +#define TROUT_4_TP_LS_EN 19 +#define TROUT_5_TP_LS_EN 1 #define TROUT_CPLD_BASE 0xE8100000 #define TROUT_CPLD_START 0x98000000 #define TROUT_CPLD_SIZE SZ_4K +#define TROUT_GPIO_CABLE_IN1 (83) +#define TROUT_GPIO_CABLE_IN2 (49) + +#define TROUT_GPIO_START (128) + +#define TROUT_GPIO_INT_MASK0_REG (0x0c) +#define TROUT_GPIO_INT_STAT0_REG (0x0e) +#define TROUT_GPIO_INT_MASK1_REG (0x14) +#define TROUT_GPIO_INT_STAT1_REG (0x10) + +#define TROUT_GPIO_HAPTIC_PWM (28) +#define TROUT_GPIO_PS_HOLD (25) + +#define TROUT_GPIO_MISC2_BASE (TROUT_GPIO_START + 0x00) +#define TROUT_GPIO_MISC3_BASE (TROUT_GPIO_START + 0x08) +#define TROUT_GPIO_MISC4_BASE (TROUT_GPIO_START + 0x10) +#define TROUT_GPIO_MISC5_BASE (TROUT_GPIO_START + 0x18) +#define TROUT_GPIO_INT2_BASE (TROUT_GPIO_START + 0x20) +#define TROUT_GPIO_MISC1_BASE (TROUT_GPIO_START + 0x28) +#define TROUT_GPIO_VIRTUAL_BASE (TROUT_GPIO_START + 0x30) +#define TROUT_GPIO_INT5_BASE (TROUT_GPIO_START + 0x48) + +#define TROUT_GPIO_CHARGER_EN (TROUT_GPIO_MISC2_BASE + 0) +#define TROUT_GPIO_ISET (TROUT_GPIO_MISC2_BASE + 1) +#define TROUT_GPIO_H2W_DAT_DIR (TROUT_GPIO_MISC2_BASE + 2) +#define TROUT_GPIO_H2W_CLK_DIR (TROUT_GPIO_MISC2_BASE + 3) +#define TROUT_GPIO_H2W_DAT_GPO (TROUT_GPIO_MISC2_BASE + 4) +#define TROUT_GPIO_H2W_CLK_GPO (TROUT_GPIO_MISC2_BASE + 5) +#define TROUT_GPIO_H2W_SEL0 (TROUT_GPIO_MISC2_BASE + 6) +#define TROUT_GPIO_H2W_SEL1 (TROUT_GPIO_MISC2_BASE + 7) + +#define TROUT_GPIO_SPOTLIGHT_EN (TROUT_GPIO_MISC3_BASE + 0) +#define TROUT_GPIO_FLASH_EN (TROUT_GPIO_MISC3_BASE + 1) +#define TROUT_GPIO_I2C_PULL (TROUT_GPIO_MISC3_BASE + 2) +#define TROUT_GPIO_TP_I2C_PULL (TROUT_GPIO_MISC3_BASE + 3) +#define TROUT_GPIO_TP_EN (TROUT_GPIO_MISC3_BASE + 4) +#define TROUT_GPIO_JOG_EN (TROUT_GPIO_MISC3_BASE + 5) +#define TROUT_GPIO_UI_LED_EN (TROUT_GPIO_MISC3_BASE + 6) +#define TROUT_GPIO_QTKEY_LED_EN (TROUT_GPIO_MISC3_BASE + 7) + +#define TROUT_GPIO_VCM_PWDN (TROUT_GPIO_MISC4_BASE + 0) +#define TROUT_GPIO_USB_H2W_SW (TROUT_GPIO_MISC4_BASE + 1) +#define TROUT_GPIO_COMPASS_RST_N (TROUT_GPIO_MISC4_BASE + 2) +#define TROUT_GPIO_HAPTIC_EN_UP (TROUT_GPIO_MISC4_BASE + 3) +#define TROUT_GPIO_HAPTIC_EN_MAIN (TROUT_GPIO_MISC4_BASE + 4) +#define TROUT_GPIO_USB_PHY_RST_N (TROUT_GPIO_MISC4_BASE + 5) +#define TROUT_GPIO_WIFI_PA_RESETX (TROUT_GPIO_MISC4_BASE + 6) +#define TROUT_GPIO_WIFI_EN (TROUT_GPIO_MISC4_BASE + 7) + +#define TROUT_GPIO_BT_32K_EN (TROUT_GPIO_MISC5_BASE + 0) +#define TROUT_GPIO_MAC_32K_EN (TROUT_GPIO_MISC5_BASE + 1) +#define TROUT_GPIO_MDDI_32K_EN (TROUT_GPIO_MISC5_BASE + 2) +#define TROUT_GPIO_COMPASS_32K_EN (TROUT_GPIO_MISC5_BASE + 3) + +#define TROUT_GPIO_NAVI_ACT_N (TROUT_GPIO_INT2_BASE + 0) +#define TROUT_GPIO_COMPASS_IRQ (TROUT_GPIO_INT2_BASE + 1) +#define TROUT_GPIO_SLIDING_DET (TROUT_GPIO_INT2_BASE + 2) +#define TROUT_GPIO_AUD_HSMIC_DET_N (TROUT_GPIO_INT2_BASE + 3) +#define TROUT_GPIO_SD_DOOR_N (TROUT_GPIO_INT2_BASE + 4) +#define TROUT_GPIO_CAM_BTN_STEP1_N (TROUT_GPIO_INT2_BASE + 5) +#define TROUT_GPIO_CAM_BTN_STEP2_N (TROUT_GPIO_INT2_BASE + 6) +#define TROUT_GPIO_TP_ATT_N (TROUT_GPIO_INT2_BASE + 7) +#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE (TROUT_GPIO_NAVI_ACT_N) +#define TROUT_GPIO_BANK0_LAST_INT_SOURCE (TROUT_GPIO_TP_ATT_N) + +#define TROUT_GPIO_H2W_DAT_GPI (TROUT_GPIO_MISC1_BASE + 0) +#define TROUT_GPIO_H2W_CLK_GPI (TROUT_GPIO_MISC1_BASE + 1) +#define TROUT_GPIO_CPLD128_VER_0 (TROUT_GPIO_MISC1_BASE + 4) +#define TROUT_GPIO_CPLD128_VER_1 (TROUT_GPIO_MISC1_BASE + 5) +#define TROUT_GPIO_CPLD128_VER_2 (TROUT_GPIO_MISC1_BASE + 6) +#define TROUT_GPIO_CPLD128_VER_3 (TROUT_GPIO_MISC1_BASE + 7) + +#define TROUT_GPIO_SDMC_CD_N (TROUT_GPIO_VIRTUAL_BASE + 0) +#define TROUT_GPIO_END (TROUT_GPIO_SDMC_CD_N) +#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N) +#define TROUT_GPIO_BANK1_LAST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N) + +#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \ + (TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE) + +#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS) +#define TROUT_INT_BANK0_COUNT (8) +#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT) +#define TROUT_INT_BANK1_COUNT (1) +#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \ + TROUT_INT_BANK1_COUNT - 1) +#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \ + (TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \ + (TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n))) + +#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT) +#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7)) +#define TROUT_BANK_TO_MASK_REG(bank) \ + (bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG) +#define TROUT_BANK_TO_STAT_REG(bank) \ + (bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG) + +#endif /* GUARD */ diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h index 262b441b4374..83e47c0d5c2e 100644 --- a/arch/arm/mach-msm/include/mach/gpio.h +++ b/arch/arm/mach-msm/include/mach/gpio.h @@ -16,6 +16,13 @@ #ifndef __ASM_ARCH_MSM_GPIO_H #define __ASM_ARCH_MSM_GPIO_H +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + /** * struct msm_gpio - GPIO pin description * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config() diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig deleted file mode 100644 index eb7660f5d4b7..000000000000 --- a/arch/arm/mach-mx1/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -if ARCH_MX1 - -comment "MX1 platforms:" - -config MACH_MXLADS - bool - -config ARCH_MX1ADS - bool "MX1ADS platform" - select MACH_MXLADS - help - Say Y here if you are using Motorola MX1ADS/MXLADS boards - -config MACH_SCB9328 - bool "Synertronixx scb9328" - help - Say Y here if you are using a Synertronixx scb9328 board - -endif diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile deleted file mode 100644 index fc2ddf82441b..000000000000 --- a/arch/arm/mach-mx1/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS -obj-y += generic.o clock.o devices.o - -# Support for CMOS sensor interface -obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o - -# Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o -obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot deleted file mode 100644 index 8ed1492288a2..000000000000 --- a/arch/arm/mach-mx1/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y := 0x08008000 -params_phys-y := 0x08000100 -initrd_phys-y := 0x08800000 - diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h deleted file mode 100644 index 22e866ff0c09..000000000000 --- a/arch/arm/mach-mx1/crm_regs.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This file may be distributed under the terms of the GNU General - * Public License, version 2. - */ - -#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__ -#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__ - -#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) -#define SCM_BASE IO_ADDRESS(SCM_BASE_ADDR) - -/* CCM register addresses */ -#define CCM_CSCR (CCM_BASE + 0x0) -#define CCM_MPCTL0 (CCM_BASE + 0x4) -#define CCM_MPCTL1 (CCM_BASE + 0x8) -#define CCM_SPCTL0 (CCM_BASE + 0xC) -#define CCM_SPCTL1 (CCM_BASE + 0x10) -#define CCM_PCDR (CCM_BASE + 0x20) - -#define CCM_CSCR_CLKO_OFFSET 29 -#define CCM_CSCR_CLKO_MASK (0x7 << 29) -#define CCM_CSCR_USB_OFFSET 26 -#define CCM_CSCR_USB_MASK (0x7 << 26) -#define CCM_CSCR_SPLL_RESTART (1 << 22) -#define CCM_CSCR_MPLL_RESTART (1 << 21) -#define CCM_CSCR_OSC_EN_SHIFT 17 -#define CCM_CSCR_SYSTEM_SEL (1 << 16) -#define CCM_CSCR_BCLK_OFFSET 10 -#define CCM_CSCR_BCLK_MASK (0xF << 10) -#define CCM_CSCR_PRESC (1 << 15) -#define CCM_CSCR_SPEN (1 << 1) -#define CCM_CSCR_MPEN (1 << 0) - -#define CCM_PCDR_PCLK3_OFFSET 16 -#define CCM_PCDR_PCLK3_MASK (0x7F << 16) -#define CCM_PCDR_PCLK2_OFFSET 4 -#define CCM_PCDR_PCLK2_MASK (0xF << 4) -#define CCM_PCDR_PCLK1_OFFSET 0 -#define CCM_PCDR_PCLK1_MASK 0xF - -/* SCM register addresses */ -#define SCM_SIDR (SCM_BASE + 0x0) -#define SCM_FMCR (SCM_BASE + 0x4) -#define SCM_GPCR (SCM_BASE + 0x8) -#define SCM_GCCR (SCM_BASE + 0xC) - -#define SCM_GCCR_DMA_CLK_EN_OFFSET 3 -#define SCM_GCCR_CSI_CLK_EN_OFFSET 2 -#define SCM_GCCR_MMA_CLK_EN_OFFSET 1 -#define SCM_GCCR_USBD_CLK_EN_OFFSET 0 - -#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */ diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c deleted file mode 100644 index b6be29d1cb08..000000000000 --- a/arch/arm/mach-mx1/devices.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <mach/irqs.h> -#include <mach/hardware.h> - -#include "devices.h" - -static struct resource imx_csi_resources[] = { - { - .start = 0x00224000, - .end = 0x00224010, - .flags = IORESOURCE_MEM, - }, { - .start = CSI_INT, - .end = CSI_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 imx_csi_dmamask = 0xffffffffUL; - -struct platform_device imx_csi_device = { - .name = "mx1-camera", - .id = 0, /* This is used to put cameras on this interface */ - .dev = { - .dma_mask = &imx_csi_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .resource = imx_csi_resources, - .num_resources = ARRAY_SIZE(imx_csi_resources), -}; - -static struct resource imx_i2c_resources[] = { - { - .start = 0x00217000, - .end = 0x00217010, - .flags = IORESOURCE_MEM, - }, { - .start = I2C_INT, - .end = I2C_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_i2c_device = { - .name = "imx-i2c", - .id = 0, - .resource = imx_i2c_resources, - .num_resources = ARRAY_SIZE(imx_i2c_resources), -}; - -static struct resource imx_uart1_resources[] = { - { - .start = UART1_BASE_ADDR, - .end = UART1_BASE_ADDR + 0xD0, - .flags = IORESOURCE_MEM, - }, { - .start = UART1_MINT_RX, - .end = UART1_MINT_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = UART1_MINT_TX, - .end = UART1_MINT_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = UART1_MINT_RTS, - .end = UART1_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_uart1_device = { - .name = "imx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(imx_uart1_resources), - .resource = imx_uart1_resources, -}; - -static struct resource imx_uart2_resources[] = { - { - .start = UART2_BASE_ADDR, - .end = UART2_BASE_ADDR + 0xD0, - .flags = IORESOURCE_MEM, - }, { - .start = UART2_MINT_RX, - .end = UART2_MINT_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = UART2_MINT_TX, - .end = UART2_MINT_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = UART2_MINT_RTS, - .end = UART2_MINT_RTS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_uart2_device = { - .name = "imx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(imx_uart2_resources), - .resource = imx_uart2_resources, -}; - -static struct resource imx_rtc_resources[] = { - { - .start = 0x00204000, - .end = 0x00204024, - .flags = IORESOURCE_MEM, - }, { - .start = RTC_INT, - .end = RTC_INT, - .flags = IORESOURCE_IRQ, - }, { - .start = RTC_SAMINT, - .end = RTC_SAMINT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_rtc_device = { - .name = "rtc-imx", - .id = 0, - .resource = imx_rtc_resources, - .num_resources = ARRAY_SIZE(imx_rtc_resources), -}; - -static struct resource imx_wdt_resources[] = { - { - .start = 0x00201000, - .end = 0x00201008, - .flags = IORESOURCE_MEM, - }, { - .start = WDT_INT, - .end = WDT_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_wdt_device = { - .name = "imx-wdt", - .id = 0, - .resource = imx_wdt_resources, - .num_resources = ARRAY_SIZE(imx_wdt_resources), -}; - -static struct resource imx_usb_resources[] = { - { - .start = 0x00212000, - .end = 0x00212148, - .flags = IORESOURCE_MEM, - }, { - .start = USBD_INT0, - .end = USBD_INT0, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT1, - .end = USBD_INT1, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT2, - .end = USBD_INT2, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT3, - .end = USBD_INT3, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT4, - .end = USBD_INT4, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT5, - .end = USBD_INT5, - .flags = IORESOURCE_IRQ, - }, { - .start = USBD_INT6, - .end = USBD_INT6, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_usb_device = { - .name = "imx_udc", - .id = 0, - .num_resources = ARRAY_SIZE(imx_usb_resources), - .resource = imx_usb_resources, -}; - -/* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR), - .irq = GPIO_INT_PORTA, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100), - .irq = GPIO_INT_PORTB, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200), - .irq = GPIO_INT_PORTC, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, { - .chip.label = "gpio-3", - .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300), - .irq = GPIO_INT_PORTD, - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - } -}; - -int __init mxc_register_gpios(void) -{ - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); -} diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h deleted file mode 100644 index 0da5d7cce3a2..000000000000 --- a/arch/arm/mach-mx1/devices.h +++ /dev/null @@ -1,7 +0,0 @@ -extern struct platform_device imx_csi_device; -extern struct platform_device imx_i2c_device; -extern struct platform_device imx_uart1_device; -extern struct platform_device imx_uart2_device; -extern struct platform_device imx_rtc_device; -extern struct platform_device imx_wdt_device; -extern struct platform_device imx_usb_device; diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c deleted file mode 100644 index 1c0c835b2252..000000000000 --- a/arch/arm/mach-mx2/serial.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <mach/hardware.h> -#include <mach/imx-uart.h> -#include "devices.h" - -static struct resource uart0[] = { - { - .start = MX2x_UART1_BASE_ADDR, - .end = MX2x_UART1_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_UART1, - .end = MX2x_INT_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = MX2x_UART2_BASE_ADDR, - .end = MX2x_UART2_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_UART2, - .end = MX2x_INT_UART2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = MX2x_UART3_BASE_ADDR, - .end = MX2x_UART3_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_UART3, - .end = MX2x_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -static struct resource uart3[] = { - { - .start = MX2x_UART4_BASE_ADDR, - .end = MX2x_UART4_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_UART4, - .end = MX2x_INT_UART4, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device3 = { - .name = "imx-uart", - .id = 3, - .resource = uart3, - .num_resources = ARRAY_SIZE(uart3), -}; - -#ifdef CONFIG_MACH_MX27 -static struct resource uart4[] = { - { - .start = MX27_UART5_BASE_ADDR, - .end = MX27_UART5_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_UART5, - .end = MX27_INT_UART5, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device4 = { - .name = "imx-uart", - .id = 4, - .resource = uart4, - .num_resources = ARRAY_SIZE(uart4), -}; - -static struct resource uart5[] = { - { - .start = MX27_UART6_BASE_ADDR, - .end = MX27_UART6_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_UART6, - .end = MX27_INT_UART6, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device5 = { - .name = "imx-uart", - .id = 5, - .resource = uart5, - .num_resources = ARRAY_SIZE(uart5), -}; -#endif diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig index 54d217314ee9..c71a7bc19284 100644 --- a/arch/arm/mach-mx25/Kconfig +++ b/arch/arm/mach-mx25/Kconfig @@ -4,5 +4,28 @@ comment "MX25 platforms:" config MACH_MX25_3DS bool "Support MX25PDK (3DS) Platform" + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + +config MACH_EUKREA_CPUIMX25 + bool "Support Eukrea CPUIMX25 Platform" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select MXC_ULPI if USB_ULPI + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX25 + default MACH_EUKREA_MBIMXSD25_BASEBOARD + +config MACH_EUKREA_MBIMXSD25_BASEBOARD + prompt "Eukrea MBIMXSD development board" + bool + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice endif diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile index 10cebc5ced8c..d9e46ce00a4e 100644 --- a/arch/arm/mach-mx25/Makefile +++ b/arch/arm/mach-mx25/Makefile @@ -1,3 +1,5 @@ obj-y := mm.o devices.o obj-$(CONFIG_ARCH_MX25) += clock.o -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25pdk.o +obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-cpuimx25.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd-baseboard.o diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 155014993b13..40c7cc41cee3 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -109,6 +109,16 @@ static unsigned long get_rate_uart(struct clk *clk) return get_rate_per(15); } +static unsigned long get_rate_ssi2(struct clk *clk) +{ + return get_rate_per(14); +} + +static unsigned long get_rate_ssi1(struct clk *clk) +{ + return get_rate_per(13); +} + static unsigned long get_rate_i2c(struct clk *clk) { return get_rate_per(6); @@ -129,9 +139,17 @@ static unsigned long get_rate_lcdc(struct clk *clk) return get_rate_per(7); } +static unsigned long get_rate_csi(struct clk *clk) +{ + return get_rate_per(0); +} + static unsigned long get_rate_otg(struct clk *clk) { - return 48000000; /* FIXME */ + unsigned long cctl = readl(CRM_BASE + CCM_CCTL); + unsigned long rate = get_rate_upll(); + + return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1); } static int clk_cgcr_enable(struct clk *clk) @@ -166,14 +184,40 @@ static void clk_cgcr_disable(struct clk *clk) .secondary = s, \ } +/* + * Note: the following IPG clock gating bits are wrongly marked "Reserved" in + * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is + * taken from the Freescale released BSP. + * + * bit reg offset clock + * + * 0 CGCR1 0 AUDMUX + * 12 CGCR1 12 ESAI + * 16 CGCR1 16 GPIO1 + * 17 CGCR1 17 GPIO2 + * 18 CGCR1 18 GPIO3 + * 23 CGCR1 23 I2C1 + * 24 CGCR1 24 I2C2 + * 25 CGCR1 25 I2C3 + * 27 CGCR1 27 IOMUXC + * 28 CGCR1 28 KPP + * 30 CGCR1 30 OWIRE + * 36 CGCR2 4 RTIC + * 51 CGCR2 19 WDOG + */ + DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL); DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk); +DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL); +DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk); DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk); DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk); @@ -191,6 +235,13 @@ DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk); DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk); +DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk); +DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk); +DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL); +DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk); +DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(can2_clk, 0, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -217,7 +268,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk) - _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) + _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk) _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) @@ -225,6 +276,13 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) + _REGISTER_CLOCK(NULL, "audmux", audmux_clk) + _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) + _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) }; int __init mx25_clocks_init(void) @@ -238,9 +296,13 @@ int __init mx25_clocks_init(void) __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0); __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1); __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2); +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) + clk_enable(&uart1_clk); +#endif - /* Clock source for lcdc is upll */ - __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64); + /* Clock source for lcdc and csi is upll */ + __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0), + CRM_BASE + 0x64); mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h new file mode 100644 index 000000000000..d86a7c3ca8b0 --- /dev/null +++ b/arch/arm/mach-mx25/devices-imx25.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx25.h> +#include <mach/devices-common.h> + +#define imx25_add_flexcan0(pdata) \ + imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata) +#define imx25_add_flexcan1(pdata) \ + imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata) + +#define imx25_add_imx_i2c0(pdata) \ + imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata) +#define imx25_add_imx_i2c1(pdata) \ + imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata) +#define imx25_add_imx_i2c2(pdata) \ + imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata) + +#define imx25_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata) +#define imx25_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata) +#define imx25_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata) +#define imx25_add_imx_uart3(pdata) \ + imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata) +#define imx25_add_imx_uart4(pdata) \ + imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata) + +#define imx25_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata) + +#define imx25_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata) +#define imx25_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata) +#define imx25_add_spi_imx2(pdata) \ + imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 3a405fa400eb..3468eb15b236 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -22,103 +22,6 @@ #include <mach/mx25.h> #include <mach/irqs.h> -static struct resource uart0[] = { - { - .start = 0x43f90000, - .end = 0x43f93fff, - .flags = IORESOURCE_MEM, - }, { - .start = 45, - .end = 45, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = 0x43f94000, - .end = 0x43f97fff, - .flags = IORESOURCE_MEM, - }, { - .start = 32, - .end = 32, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = 0x5000c000, - .end = 0x5000ffff, - .flags = IORESOURCE_MEM, - }, { - .start = 18, - .end = 18, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -static struct resource uart3[] = { - { - .start = 0x50008000, - .end = 0x5000bfff, - .flags = IORESOURCE_MEM, - }, { - .start = 5, - .end = 5, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device3 = { - .name = "imx-uart", - .id = 3, - .resource = uart3, - .num_resources = ARRAY_SIZE(uart3), -}; - -static struct resource uart4[] = { - { - .start = 0x5002c000, - .end = 0x5002ffff, - .flags = IORESOURCE_MEM, - }, { - .start = 40, - .end = 40, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device4 = { - .name = "imx-uart", - .id = 4, - .resource = uart4, - .num_resources = ARRAY_SIZE(uart4), -}; - -#define MX25_OTG_BASE_ADDR 0x53FF4000 - static u64 otg_dmamask = DMA_BIT_MASK(32); static struct resource mxc_otg_resources[] = { @@ -181,63 +84,6 @@ struct platform_device mxc_usbh2 = { .num_resources = ARRAY_SIZE(mxc_usbh2_resources), }; -static struct resource mxc_spi_resources0[] = { - { - .start = 0x43fa4000, - .end = 0x43fa7fff, - .flags = IORESOURCE_MEM, - }, { - .start = 14, - .end = 14, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_spi_device0 = { - .name = "spi_imx", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_spi_resources0), - .resource = mxc_spi_resources0, -}; - -static struct resource mxc_spi_resources1[] = { - { - .start = 0x50010000, - .end = 0x50013fff, - .flags = IORESOURCE_MEM, - }, { - .start = 13, - .end = 13, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_spi_device1 = { - .name = "spi_imx", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_spi_resources1), - .resource = mxc_spi_resources1, -}; - -static struct resource mxc_spi_resources2[] = { - { - .start = 0x50004000, - .end = 0x50007fff, - .flags = IORESOURCE_MEM, - }, { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_spi_device2 = { - .name = "spi_imx", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_spi_resources2), - .resource = mxc_spi_resources2, -}; - static struct resource mxc_pwm_resources0[] = { { .start = 0x53fe0000, @@ -333,63 +179,6 @@ struct platform_device mxc_pwm_device3 = { .resource = mxc_pwm_resources3, }; -static struct resource mxc_i2c_1_resources[] = { - { - .start = 0x43f80000, - .end = 0x43f83fff, - .flags = IORESOURCE_MEM, - }, { - .start = 3, - .end = 3, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c_1_resources), - .resource = mxc_i2c_1_resources, -}; - -static struct resource mxc_i2c_2_resources[] = { - { - .start = 0x43f98000, - .end = 0x43f9bfff, - .flags = IORESOURCE_MEM, - }, { - .start = 4, - .end = 4, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c_2_resources), - .resource = mxc_i2c_2_resources, -}; - -static struct resource mxc_i2c_3_resources[] = { - { - .start = 0x43f84000, - .end = 0x43f87fff, - .flags = IORESOURCE_MEM, - }, { - .start = 10, - .end = 10, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_i2c_device2 = { - .name = "imx-i2c", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_i2c_3_resources), - .resource = mxc_i2c_3_resources, -}; - static struct mxc_gpio_port imx_gpio_ports[] = { { .chip.label = "gpio-0", @@ -414,7 +203,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = { } }; -int __init mxc_register_gpios(void) +int __init imx25_register_gpios(void) { return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } @@ -439,26 +228,6 @@ struct platform_device mx25_fec_device = { .resource = mx25_fec_resources, }; -static struct resource mxc_nand_resources[] = { - { - .start = MX25_NFC_BASE_ADDR, - .end = MX25_NFC_BASE_ADDR + 0x1fff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX25_INT_NANDFC, - .end = MX25_INT_NANDFC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_nand_device = { - .name = "mxc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_nand_resources), - .resource = mxc_nand_resources, -}; - static struct resource mx25_rtc_resources[] = { { .start = MX25_DRYICE_BASE_ADDR, @@ -515,3 +284,83 @@ struct platform_device mxc_wdt = { .num_resources = ARRAY_SIZE(mxc_wdt_resources), .resource = mxc_wdt_resources, }; + +static struct resource mx25_kpp_resources[] = { + { + .start = MX25_KPP_BASE_ADDR, + .end = MX25_KPP_BASE_ADDR + 0xf, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_KPP, + .end = MX25_INT_KPP, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mx25_kpp_device = { + .name = "imx-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(mx25_kpp_resources), + .resource = mx25_kpp_resources, +}; + +static struct resource imx_ssi_resources0[] = { + { + .start = MX25_SSI1_BASE_ADDR, + .end = MX25_SSI1_BASE_ADDR + 0x3fff, + .flags = IORESOURCE_MEM, + }, { + .start = MX25_INT_SSI1, + .end = MX25_INT_SSI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource imx_ssi_resources1[] = { + { + .start = MX25_SSI2_BASE_ADDR, + .end = MX25_SSI2_BASE_ADDR + 0x3fff, + .flags = IORESOURCE_MEM + }, { + .start = MX25_INT_SSI2, + .end = MX25_INT_SSI2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_ssi_device0 = { + .name = "imx-ssi", + .id = 0, + .num_resources = ARRAY_SIZE(imx_ssi_resources0), + .resource = imx_ssi_resources0, +}; + +struct platform_device imx_ssi_device1 = { + .name = "imx-ssi", + .id = 1, + .num_resources = ARRAY_SIZE(imx_ssi_resources1), + .resource = imx_ssi_resources1, +}; + +static struct resource mx25_csi_resources[] = { + { + .start = MX25_CSI_BASE_ADDR, + .end = MX25_CSI_BASE_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX25_INT_CSI, + .flags = IORESOURCE_IRQ + }, +}; + +struct platform_device mx25_csi_device = { + .name = "mx2-camera", + .id = 0, + .num_resources = ARRAY_SIZE(mx25_csi_resources), + .resource = mx25_csi_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index cee12c0a0be6..4aceb68e35a7 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -1,24 +1,16 @@ -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; -extern struct platform_device mxc_uart_device3; -extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_otg; extern struct platform_device otg_udc_device; extern struct platform_device mxc_usbh2; -extern struct platform_device mxc_spi_device0; -extern struct platform_device mxc_spi_device1; -extern struct platform_device mxc_spi_device2; extern struct platform_device mxc_pwm_device0; extern struct platform_device mxc_pwm_device1; extern struct platform_device mxc_pwm_device2; extern struct platform_device mxc_pwm_device3; extern struct platform_device mxc_keypad_device; -extern struct platform_device mxc_i2c_device0; -extern struct platform_device mxc_i2c_device1; -extern struct platform_device mxc_i2c_device2; extern struct platform_device mx25_fec_device; -extern struct platform_device mxc_nand_device; extern struct platform_device mx25_rtc_device; extern struct platform_device mx25_fb_device; extern struct platform_device mxc_wdt; +extern struct platform_device mx25_kpp_device; +extern struct platform_device imx_ssi_device0; +extern struct platform_device imx_ssi_device1; +extern struct platform_device mx25_csi_device; diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c new file mode 100644 index 000000000000..91931dcb0689 --- /dev/null +++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c @@ -0,0 +1,260 @@ +/* + * Copyright (C) 2010 Eric Benard - eric@eukrea.com + * + * Based on pcm970-baseboard.c which is : + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <video/platform_lcd.h> + +#include <mach/hardware.h> +#include <mach/iomux-mx25.h> +#include <mach/common.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/mx25.h> +#include <mach/imx-uart.h> +#include <mach/imxfb.h> +#include <mach/ssi.h> +#include <mach/audmux.h> + +#include "devices-imx25.h" +#include "devices.h" + +static struct pad_desc eukrea_mbimxsd_pads[] = { + /* LCD */ + MX25_PAD_LD0__LD0, + MX25_PAD_LD1__LD1, + MX25_PAD_LD2__LD2, + MX25_PAD_LD3__LD3, + MX25_PAD_LD4__LD4, + MX25_PAD_LD5__LD5, + MX25_PAD_LD6__LD6, + MX25_PAD_LD7__LD7, + MX25_PAD_LD8__LD8, + MX25_PAD_LD9__LD9, + MX25_PAD_LD10__LD10, + MX25_PAD_LD11__LD11, + MX25_PAD_LD12__LD12, + MX25_PAD_LD13__LD13, + MX25_PAD_LD14__LD14, + MX25_PAD_LD15__LD15, + MX25_PAD_GPIO_E__LD16, + MX25_PAD_GPIO_F__LD17, + MX25_PAD_HSYNC__HSYNC, + MX25_PAD_VSYNC__VSYNC, + MX25_PAD_LSCLK__LSCLK, + MX25_PAD_OE_ACD__OE_ACD, + MX25_PAD_CONTRAST__CONTRAST, + /* LCD_PWR */ + MX25_PAD_PWM__GPIO_1_26, + /* LED */ + MX25_PAD_POWER_FAIL__GPIO_3_19, + /* SWITCH */ + MX25_PAD_VSTBY_ACK__GPIO_3_18, + /* UART2 */ + MX25_PAD_UART2_RTS__UART2_RTS, + MX25_PAD_UART2_CTS__UART2_CTS, + MX25_PAD_UART2_TXD__UART2_TXD, + MX25_PAD_UART2_RXD__UART2_RXD, + /* SD1 */ + MX25_PAD_SD1_CMD__SD1_CMD, + MX25_PAD_SD1_CLK__SD1_CLK, + MX25_PAD_SD1_DATA0__SD1_DATA0, + MX25_PAD_SD1_DATA1__SD1_DATA1, + MX25_PAD_SD1_DATA2__SD1_DATA2, + MX25_PAD_SD1_DATA3__SD1_DATA3, + /* SD1 CD */ + MX25_PAD_DE_B__GPIO_2_20, + /* I2S */ + MX25_PAD_KPP_COL3__AUD5_TXFS, + MX25_PAD_KPP_COL2__AUD5_TXC, + MX25_PAD_KPP_COL1__AUD5_RXD, + MX25_PAD_KPP_COL0__AUD5_TXD, +}; + +#define GPIO_LED1 83 +#define GPIO_SWITCH1 82 +#define GPIO_SD1CD 52 +#define GPIO_LCDPWR 26 + +static struct imx_fb_videomode eukrea_mximxsd_modes[] = { + { + .mode = { + .name = "CMO-QVGA", + .refresh = 60, + .xres = 320, + .yres = 240, + .pixclock = KHZ2PICOS(6500), + .left_margin = 30, + .right_margin = 38, + .upper_margin = 20, + .lower_margin = 3, + .hsync_len = 15, + .vsync_len = 4, + }, + .bpp = 16, + .pcr = 0xCAD08B80, + }, +}; + +static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = { + .mode = eukrea_mximxsd_modes, + .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes), + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00040060, +}; + +static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) + gpio_direction_output(GPIO_LCDPWR, 1); + else + gpio_direction_output(GPIO_LCDPWR, 0); +} + +static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = { + .set_power = eukrea_mbimxsd_lcd_power_set, +}; + +static struct platform_device eukrea_mbimxsd_lcd_powerdev = { + .name = "platform-lcd", + .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, +}; + +static struct gpio_led eukrea_mbimxsd_leds[] = { + { + .name = "led1", + .default_trigger = "heartbeat", + .active_low = 1, + .gpio = GPIO_LED1, + }, +}; + +static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { + .leds = eukrea_mbimxsd_leds, + .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), +}; + +static struct platform_device eukrea_mbimxsd_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &eukrea_mbimxsd_led_info, + }, +}; + +static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { + { + .gpio = GPIO_SWITCH1, + .code = BTN_0, + .desc = "BP1", + .active_low = 1, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = { + .buttons = eukrea_mbimxsd_gpio_buttons, + .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), +}; + +static struct platform_device eukrea_mbimxsd_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &eukrea_mbimxsd_button_data, + } +}; + +static struct platform_device *platform_devices[] __initdata = { + &eukrea_mbimxsd_leds_gpio, + &eukrea_mbimxsd_button_device, + &eukrea_mbimxsd_lcd_powerdev, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { + { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, +}; + +struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { + .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, +}; + +/* + * system init for baseboard usage. Will be called by cpuimx25 init. + * + * Add platform devices present on this baseboard and init + * them from CPU side as far as required to use them later on + */ +void __init eukrea_mbimxsd_baseboard_init(void) +{ + if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, + ARRAY_SIZE(eukrea_mbimxsd_pads))) + printk(KERN_ERR "error setting mbimxsd pads !\n"); + +#if defined(CONFIG_SND_SOC_EUKREA_TLV320) + /* SSI unit master I2S codec connected to SSI_AUD5*/ + mxc_audmux_v2_configure_port(0, + MXC_AUDMUX_V2_PTCR_SYN | + MXC_AUDMUX_V2_PTCR_TFSDIR | + MXC_AUDMUX_V2_PTCR_TFSEL(4) | + MXC_AUDMUX_V2_PTCR_TCLKDIR | + MXC_AUDMUX_V2_PTCR_TCSEL(4), + MXC_AUDMUX_V2_PDCR_RXDSEL(4) + ); + mxc_audmux_v2_configure_port(4, + MXC_AUDMUX_V2_PTCR_SYN, + MXC_AUDMUX_V2_PDCR_RXDSEL(0) + ); +#endif + + imx25_add_imx_uart1(&uart_pdata); + mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata); + mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); + + gpio_request(GPIO_LED1, "LED1"); + gpio_direction_output(GPIO_LED1, 1); + gpio_free(GPIO_LED1); + + gpio_request(GPIO_SWITCH1, "SWITCH1"); + gpio_direction_input(GPIO_SWITCH1); + gpio_free(GPIO_SWITCH1); + + gpio_request(GPIO_LCDPWR, "LCDPWR"); + gpio_direction_output(GPIO_LCDPWR, 1); + gpio_free(GPIO_SWITCH1); + + i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, + ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c new file mode 100644 index 000000000000..56b2e26d23b4 --- /dev/null +++ b/arch/arm/mach-mx25/mach-cpuimx25.c @@ -0,0 +1,173 @@ +/* + * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> + * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/fec.h> +#include <linux/platform_device.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> + +#include <mach/eukrea-baseboards.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/memory.h> +#include <asm/mach/map.h> +#include <mach/common.h> +#include <mach/mx25.h> +#include <mach/mxc_nand.h> +#include <mach/imxfb.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> +#include <mach/iomux-mx25.h> + +#include "devices-imx25.h" +#include "devices.h" + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct pad_desc eukrea_cpuimx25_pads[] = { + /* FEC - RMII */ + MX25_PAD_FEC_MDC__FEC_MDC, + MX25_PAD_FEC_MDIO__FEC_MDIO, + MX25_PAD_FEC_TDATA0__FEC_TDATA0, + MX25_PAD_FEC_TDATA1__FEC_TDATA1, + MX25_PAD_FEC_TX_EN__FEC_TX_EN, + MX25_PAD_FEC_RDATA0__FEC_RDATA0, + MX25_PAD_FEC_RDATA1__FEC_RDATA1, + MX25_PAD_FEC_RX_DV__FEC_RX_DV, + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, + /* I2C1 */ + MX25_PAD_I2C1_CLK__I2C1_CLK, + MX25_PAD_I2C1_DAT__I2C1_DAT, +}; + +static struct fec_platform_data mx25_fec_pdata = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static const struct mxc_nand_platform_data +eukrea_cpuimx25_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +static const struct imxi2c_platform_data +eukrea_cpuimx25_i2c0_data __initconst = { + .bitrate = 100000, +}; + +static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +static struct mxc_usbh_platform_data otg_pdata = { + .portsc = MXC_EHCI_MODE_UTMI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | + MXC_EHCI_IPPUE_DOWN, +}; + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, +}; + +static int otg_mode_host; + +static int __init eukrea_cpuimx25_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", eukrea_cpuimx25_otg_mode); + +static void __init eukrea_cpuimx25_init(void) +{ + if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, + ARRAY_SIZE(eukrea_cpuimx25_pads))) + printk(KERN_ERR "error setting cpuimx25 pads !\n"); + + imx25_add_imx_uart0(&uart_pdata); + imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); + mxc_register_device(&mx25_rtc_device, NULL); + mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); + + i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, + ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); + imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data); + +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg, &otg_pdata); + } + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif + if (!otg_mode_host) + mxc_register_device(&otg_udc_device, &otg_device_pdata); + +#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD + eukrea_mbimxsd_baseboard_init(); +#endif +} + +static void __init eukrea_cpuimx25_timer_init(void) +{ + mx25_clocks_init(); +} + +static struct sys_timer eukrea_cpuimx25_timer = { + .init = eukrea_cpuimx25_timer_init, +}; + +MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") + /* Maintainer: Eukrea Electromatique */ + .phys_io = MX25_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX25_PHYS_OFFSET + 0x100, + .map_io = mx25_map_io, + .init_irq = mx25_init_irq, + .init_machine = eukrea_cpuimx25_init, + .timer = &eukrea_cpuimx25_timer, +MACHINE_END diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25_3ds.c index 83d74109e7d8..62bc21f11a71 100644 --- a/arch/arm/mach-mx25/mach-mx25pdk.c +++ b/arch/arm/mach-mx25/mach-mx25_3ds.c @@ -16,6 +16,12 @@ * Boston, MA 02110-1301, USA. */ +/* + * This machine is known as: + * - i.MX25 3-Stack Development System + * - i.MX25 Platform Development Kit (i.MX25 PDK) + */ + #include <linux/types.h> #include <linux/init.h> #include <linux/delay.h> @@ -24,6 +30,7 @@ #include <linux/gpio.h> #include <linux/fec.h> #include <linux/platform_device.h> +#include <linux/input/matrix_keypad.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -32,14 +39,14 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/mx25.h> -#include <mach/mxc_nand.h> #include <mach/imxfb.h> -#include "devices.h" #include <mach/iomux-mx25.h> -static struct imxuart_platform_data uart_pdata = { +#include "devices-imx25.h" +#include "devices.h" + +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -80,6 +87,16 @@ static struct pad_desc mx25pdk_pads[] = { MX25_PAD_LSCLK__LSCLK, MX25_PAD_OE_ACD__OE_ACD, MX25_PAD_CONTRAST__CONTRAST, + + /* Keypad */ + MX25_PAD_KPP_ROW0__KPP_ROW0, + MX25_PAD_KPP_ROW1__KPP_ROW1, + MX25_PAD_KPP_ROW2__KPP_ROW2, + MX25_PAD_KPP_ROW3__KPP_ROW3, + MX25_PAD_KPP_COL0__KPP_COL0, + MX25_PAD_KPP_COL1__KPP_COL1, + MX25_PAD_KPP_COL2__KPP_COL2, + MX25_PAD_KPP_COL3__KPP_COL3, }; static struct fec_platform_data mx25_fec_pdata = { @@ -103,7 +120,8 @@ static void __init mx25pdk_fec_reset(void) gpio_set_value(FEC_RESET_B_GPIO, 1); } -static struct mxc_nand_platform_data mx25pdk_nand_board_info = { +static const struct mxc_nand_platform_data +mx25pdk_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, .flash_bbt = 1, @@ -137,19 +155,45 @@ static struct imx_fb_platform_data mx25pdk_fb_pdata = { .dmacr = 0x00020010, }; +static const uint32_t mx25pdk_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(0, 1, KEY_DOWN), + KEY(0, 2, KEY_VOLUMEDOWN), + KEY(0, 3, KEY_HOME), + KEY(1, 0, KEY_RIGHT), + KEY(1, 1, KEY_LEFT), + KEY(1, 2, KEY_ENTER), + KEY(1, 3, KEY_VOLUMEUP), + KEY(2, 0, KEY_F6), + KEY(2, 1, KEY_F8), + KEY(2, 2, KEY_F9), + KEY(2, 3, KEY_F10), + KEY(3, 0, KEY_F1), + KEY(3, 1, KEY_F2), + KEY(3, 2, KEY_F3), + KEY(3, 3, KEY_POWER), +}; + +static struct matrix_keymap_data mx25pdk_keymap_data = { + .keymap = mx25pdk_keymap, + .keymap_size = ARRAY_SIZE(mx25pdk_keymap), +}; + static void __init mx25pdk_init(void) { mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx25_add_imx_uart0(&uart_pdata); mxc_register_device(&mxc_usbh2, NULL); - mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info); + imx25_add_mxc_nand(&mx25pdk_nand_board_info); mxc_register_device(&mx25_rtc_device, NULL); mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata); + mxc_register_device(&mxc_wdt, NULL); mx25pdk_fec_reset(); mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); + mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data); } static void __init mx25pdk_timer_init(void) diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c index a7e587ff3e9e..bb677111fb0f 100644 --- a/arch/arm/mach-mx25/mm.c +++ b/arch/arm/mach-mx25/mm.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/mm.h> @@ -69,8 +65,11 @@ void __init mx25_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +int imx25_register_gpios(void); + void __init mx25_init_irq(void) { mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT); + imx25_register_gpios(); } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 344753fdf25e..85beece802aa 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -15,6 +15,8 @@ comment "MX3 platforms:" config MACH_MX31ADS bool "Support MX31ADS platforms" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART default y help Include support for MX31ADS platform. This includes specific @@ -34,6 +36,9 @@ config MACH_MX31ADS_WM1133_EV1 config MACH_PCM037 bool "Support Phytec pcm037 (i.MX31) platforms" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI help Include support for Phytec pcm037 platform. This includes @@ -42,6 +47,7 @@ config MACH_PCM037 config MACH_PCM037_EET bool "Support pcm037 EET board extensions" depends on MACH_PCM037 + select IMX_HAVE_PLATFORM_SPI_IMX help Add support for PCM037 EET baseboard extensions. If you are using the OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel @@ -51,6 +57,9 @@ config MACH_MX31LITE bool "Support MX31 LITEKIT (LogicPD)" select ARCH_MX31 select MXC_ULPI if USB_ULPI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -58,6 +67,10 @@ config MACH_MX31LITE config MACH_MX31_3DS bool "Support MX31PDK (3DS)" select ARCH_MX31 + select MXC_DEBUG_BOARD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX help Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. @@ -74,6 +87,9 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help Include support for mx31moboard platform. This includes specific @@ -82,6 +98,8 @@ config MACH_MX31MOBOARD config MACH_MX31LILLY bool "Support MX31 LILLY-1131 platforms (INCO startec)" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI help Include support for mx31 based LILLY1131 modules. This includes @@ -90,6 +108,7 @@ config MACH_MX31LILLY config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_UART help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. @@ -97,6 +116,10 @@ config MACH_QONG config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select ARCH_MX35 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_FLEXCAN select MXC_ULPI if USB_ULPI help Include support for Phytec pcm043 platform. This includes @@ -105,6 +128,9 @@ config MACH_PCM043 config MACH_ARMADILLO5X0 bool "Support Atmark Armadillo-500 Development Base Board" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND select MXC_ULPI if USB_ULPI help Include support for Atmark Armadillo-500 platform. This includes @@ -113,6 +139,7 @@ config MACH_ARMADILLO5X0 config MACH_MX35_3DS bool "Support MX35PDK platform" select ARCH_MX35 + select IMX_HAVE_PLATFORM_IMX_UART default n help Include support for MX35PDK platform. This includes specific @@ -121,8 +148,34 @@ config MACH_MX35_3DS config MACH_KZM_ARM11_01 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" select ARCH_MX31 + select IMX_HAVE_PLATFORM_IMX_UART help Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. +config MACH_EUKREA_CPUIMX35 + bool "Support Eukrea CPUIMX35 Platform" + select ARCH_MX35 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_MXC_NAND + select MXC_ULPI if USB_ULPI + help + Include support for Eukrea CPUIMX35 platform. This includes + specific configurations for the board and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX35 + default MACH_EUKREA_MBIMXSD35_BASEBOARD + +config MACH_EUKREA_MBIMXSD35_BASEBOARD + prompt "Eukrea MBIMXSD development board" + bool + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 5d650fda5d5d..2bd7beceb991 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -22,5 +22,7 @@ obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ obj-$(CONFIG_MACH_QONG) += mach-qong.o obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o -obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o +obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd-baseboard.o diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 9f3e943e2232..d3af0fdf8475 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -359,7 +359,7 @@ DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL); DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL); DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL); DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL); -DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, NULL, NULL); +DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_ahb, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL); DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL); DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL); @@ -428,8 +428,8 @@ static struct clk nfc_clk = { static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "asrc", asrc_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) - _REGISTER_CLOCK(NULL, "can", can1_clk) - _REGISTER_CLOCK(NULL, "can", can2_clk) + _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) + _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) _REGISTER_CLOCK(NULL, "ect", ect_clk) diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h new file mode 100644 index 000000000000..3b1a44a20585 --- /dev/null +++ b/arch/arm/mach-mx3/devices-imx31.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx31.h> +#include <mach/devices-common.h> + +#define imx31_add_imx_i2c0(pdata) \ + imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata) +#define imx31_add_imx_i2c1(pdata) \ + imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata) +#define imx31_add_imx_i2c2(pdata) \ + imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata) + +#define imx31_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata) +#define imx31_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata) +#define imx31_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata) +#define imx31_add_imx_uart3(pdata) \ + imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata) +#define imx31_add_imx_uart4(pdata) \ + imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata) + +#define imx31_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata) + +#define imx31_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata) +#define imx31_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata) +#define imx31_add_spi_imx2(pdata) \ + imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h new file mode 100644 index 000000000000..f6a431a4c3d2 --- /dev/null +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx35.h> +#include <mach/devices-common.h> + +#define imx35_add_flexcan0(pdata) \ + imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata) +#define imx35_add_flexcan1(pdata) \ + imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata) + +#define imx35_add_imx_i2c0(pdata) \ + imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata) +#define imx35_add_imx_i2c1(pdata) \ + imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata) +#define imx35_add_imx_i2c2(pdata) \ + imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata) + +#define imx35_add_imx_uart0(pdata) \ + imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata) +#define imx35_add_imx_uart1(pdata) \ + imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata) +#define imx35_add_imx_uart2(pdata) \ + imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata) + +#define imx35_add_mxc_nand(pdata) \ + imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata) + +#define imx35_add_spi_imx0(pdata) \ + imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata) +#define imx35_add_spi_imx1(pdata) \ + imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index db7acd6e9101..a4fd1a26fc91 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -25,108 +25,10 @@ #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/mx3_camera.h> #include "devices.h" -static struct resource uart0[] = { - { - .start = UART1_BASE_ADDR, - .end = UART1_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART1, - .end = MXC_INT_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = UART2_BASE_ADDR, - .end = UART2_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART2, - .end = MXC_INT_UART2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = UART3_BASE_ADDR, - .end = UART3_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART3, - .end = MXC_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -#ifdef CONFIG_ARCH_MX31 -static struct resource uart3[] = { - { - .start = UART4_BASE_ADDR, - .end = UART4_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART4, - .end = MXC_INT_UART4, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device3 = { - .name = "imx-uart", - .id = 3, - .resource = uart3, - .num_resources = ARRAY_SIZE(uart3), -}; - -static struct resource uart4[] = { - { - .start = UART5_BASE_ADDR, - .end = UART5_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_UART5, - .end = MXC_INT_UART5, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device4 = { - .name = "imx-uart", - .id = 4, - .resource = uart4, - .num_resources = ARRAY_SIZE(uart4), -}; -#endif /* CONFIG_ARCH_MX31 */ - /* GPIO port description */ static struct mxc_gpio_port imx_gpio_ports[] = { { @@ -147,7 +49,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = { } }; -int __init mxc_register_gpios(void) +int __init imx3x_register_gpios(void) { return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } @@ -167,82 +69,6 @@ struct platform_device mxc_w1_master_device = { .resource = mxc_w1_master_resources, }; -static struct resource mxc_nand_resources[] = { - { - .start = 0, /* runtime dependent */ - .end = 0, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_NANDFC, - .end = MXC_INT_NANDFC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_nand_device = { - .name = "mxc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_nand_resources), - .resource = mxc_nand_resources, -}; - -static struct resource mxc_i2c0_resources[] = { - { - .start = I2C_BASE_ADDR, - .end = I2C_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C, - .end = MXC_INT_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c0_resources), - .resource = mxc_i2c0_resources, -}; - -static struct resource mxc_i2c1_resources[] = { - { - .start = I2C2_BASE_ADDR, - .end = I2C2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C2, - .end = MXC_INT_I2C2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c1_resources), - .resource = mxc_i2c1_resources, -}; - -static struct resource mxc_i2c2_resources[] = { - { - .start = I2C3_BASE_ADDR, - .end = I2C3_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_I2C3, - .end = MXC_INT_I2C3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device2 = { - .name = "imx-i2c", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_i2c2_resources), - .resource = mxc_i2c2_resources, -}; - #ifdef CONFIG_ARCH_MX31 static struct resource mxcsdhc0_resources[] = { { @@ -455,68 +281,7 @@ struct platform_device mxc_usbh2 = { .num_resources = ARRAY_SIZE(mxc_usbh2_resources), }; -/* - * SPI master controller - * 3 channels - */ -static struct resource mxc_spi_0_resources[] = { - { - .start = CSPI1_BASE_ADDR, - .end = CSPI1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI1, - .end = MXC_INT_CSPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxc_spi_1_resources[] = { - { - .start = CSPI2_BASE_ADDR, - .end = CSPI2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI2, - .end = MXC_INT_CSPI2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxc_spi_2_resources[] = { - { - .start = CSPI3_BASE_ADDR, - .end = CSPI3_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_CSPI3, - .end = MXC_INT_CSPI3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_spi_device0 = { - .name = "spi_imx", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_spi_0_resources), - .resource = mxc_spi_0_resources, -}; - -struct platform_device mxc_spi_device1 = { - .name = "spi_imx", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_spi_1_resources), - .resource = mxc_spi_1_resources, -}; - -struct platform_device mxc_spi_device2 = { - .name = "spi_imx", - .id = 2, - .num_resources = ARRAY_SIZE(mxc_spi_2_resources), - .resource = mxc_spi_2_resources, -}; - -#ifdef CONFIG_ARCH_MX35 +#if defined(CONFIG_ARCH_MX35) static struct resource mxc_fec_resources[] = { { .start = MXC_FEC_BASE_ADDR, @@ -628,16 +393,15 @@ struct platform_device imx_kpp_device = { static int __init mx3_devices_init(void) { +#if defined(CONFIG_ARCH_MX31) if (cpu_is_mx31()) { - mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; - mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff; mxc_register_device(&mxc_rnga_device, NULL); } +#endif +#if defined(CONFIG_ARCH_MX35) if (cpu_is_mx35()) { - mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR; - mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff; otg_resources[0].start = MX35_OTG_BASE_ADDR; otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff; otg_resources[1].start = MXC_INT_USBOTG; @@ -653,6 +417,7 @@ static int __init mx3_devices_init(void) imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } +#endif return 0; } diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 2c3c8646a29e..e5535234839f 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -1,14 +1,4 @@ - -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; -extern struct platform_device mxc_uart_device3; -extern struct platform_device mxc_uart_device4; extern struct platform_device mxc_w1_master_device; -extern struct platform_device mxc_nand_device; -extern struct platform_device mxc_i2c_device0; -extern struct platform_device mxc_i2c_device1; -extern struct platform_device mxc_i2c_device2; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; extern struct platform_device mx3_camera; @@ -20,9 +10,6 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device mxc_spi_device0; -extern struct platform_device mxc_spi_device1; -extern struct platform_device mxc_spi_device2; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; extern struct platform_device imx_ssi_device1; diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c new file mode 100644 index 000000000000..1dc5004df866 --- /dev/null +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -0,0 +1,263 @@ +/* + * Copyright (C) 2010 Eric Benard - eric@eukrea.com + * + * Based on pcm970-baseboard.c which is : + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/types.h> +#include <linux/init.h> + +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <video/platform_lcd.h> +#include <linux/i2c.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx35.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> +#include <mach/audmux.h> +#include <mach/ssi.h> + +#include "devices-imx35.h" +#include "devices.h" + +static const struct fb_videomode fb_modedb[] = { + { + .name = "CMO_QVGA", + .refresh = 60, + .xres = 320, + .yres = 240, + .pixclock = KHZ2PICOS(6500), + .left_margin = 68, + .right_margin = 20, + .upper_margin = 15, + .lower_margin = 4, + .hsync_len = 30, + .vsync_len = 3, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "CMO_QVGA", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct pad_desc eukrea_mbimxsd_pads[] = { + /* LCD */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + /* Backlight */ + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + /* LCD_PWR */ + MX35_PAD_D3_CLS__GPIO1_4, + /* LED */ + MX35_PAD_LD23__GPIO3_29, + /* SWITCH */ + MX35_PAD_LD19__GPIO3_25, + /* UART2 */ + MX35_PAD_CTS2__UART2_CTS, + MX35_PAD_RTS2__UART2_RTS, + MX35_PAD_TXD2__UART2_TXD_MUX, + MX35_PAD_RXD2__UART2_RXD_MUX, + /* I2S */ + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, + MX35_PAD_STXD4__AUDMUX_AUD4_TXD, + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, + MX35_PAD_SCK4__AUDMUX_AUD4_TXC, +}; + +#define GPIO_LED1 (2 * 32 + 29) +#define GPIO_SWITCH1 (2 * 32 + 25) +#define GPIO_LCDPWR (4) + +static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) + gpio_direction_output(GPIO_LCDPWR, 1); + else + gpio_direction_output(GPIO_LCDPWR, 0); +} + +static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = { + .set_power = eukrea_mbimxsd_lcd_power_set, +}; + +static struct platform_device eukrea_mbimxsd_lcd_powerdev = { + .name = "platform-lcd", + .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, +}; + +static struct gpio_led eukrea_mbimxsd_leds[] = { + { + .name = "led1", + .default_trigger = "heartbeat", + .active_low = 1, + .gpio = GPIO_LED1, + }, +}; + +static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { + .leds = eukrea_mbimxsd_leds, + .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), +}; + +static struct platform_device eukrea_mbimxsd_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &eukrea_mbimxsd_led_info, + }, +}; + +static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { + { + .gpio = GPIO_SWITCH1, + .code = BTN_0, + .desc = "BP1", + .active_low = 1, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = { + .buttons = eukrea_mbimxsd_gpio_buttons, + .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), +}; + +static struct platform_device eukrea_mbimxsd_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &eukrea_mbimxsd_button_data, + } +}; + +static struct platform_device *platform_devices[] __initdata = { + &eukrea_mbimxsd_leds_gpio, + &eukrea_mbimxsd_button_device, + &eukrea_mbimxsd_lcd_powerdev, +}; + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { + { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, +}; + +struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { + .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, +}; + +/* + * system init for baseboard usage. Will be called by cpuimx35 init. + * + * Add platform devices present on this baseboard and init + * them from CPU side as far as required to use them later on + */ +void __init eukrea_mbimxsd_baseboard_init(void) +{ + if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, + ARRAY_SIZE(eukrea_mbimxsd_pads))) + printk(KERN_ERR "error setting mbimxsd pads !\n"); + +#if defined(CONFIG_SND_SOC_EUKREA_TLV320) + /* SSI unit master I2S codec connected to SSI_AUD4 */ + mxc_audmux_v2_configure_port(0, + MXC_AUDMUX_V2_PTCR_SYN | + MXC_AUDMUX_V2_PTCR_TFSDIR | + MXC_AUDMUX_V2_PTCR_TFSEL(3) | + MXC_AUDMUX_V2_PTCR_TCLKDIR | + MXC_AUDMUX_V2_PTCR_TCSEL(3), + MXC_AUDMUX_V2_PDCR_RXDSEL(3) + ); + mxc_audmux_v2_configure_port(3, + MXC_AUDMUX_V2_PTCR_SYN, + MXC_AUDMUX_V2_PDCR_RXDSEL(0) + ); +#endif + + imx35_add_imx_uart1(&uart_pdata); + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); + + mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); + + gpio_request(GPIO_LED1, "LED1"); + gpio_direction_output(GPIO_LED1, 1); + gpio_free(GPIO_LED1); + + gpio_request(GPIO_SWITCH1, "SWITCH1"); + gpio_direction_input(GPIO_SWITCH1); + gpio_free(GPIO_SWITCH1); + + gpio_request(GPIO_LCDPWR, "LCDPWR"); + gpio_direction_output(GPIO_LCDPWR, 1); + gpio_free(GPIO_SWITCH1); + + i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, + ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 5f72ec91af2d..96aadcadb4ff 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -48,16 +48,14 @@ #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/board-armadillo5x0.h> #include <mach/mmc.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" #include "crm_regs.h" @@ -301,7 +299,8 @@ static struct platform_device armadillo5x0_button_device = { /* * NAND Flash */ -static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = { +static const struct mxc_nand_platform_data +armadillo5x0_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -493,13 +492,12 @@ static struct platform_device armadillo5x0_smc911x_device = { }; /* UART device data */ -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, - &mxc_i2c_device1, &armadillo5x0_button_device, }; @@ -512,10 +510,11 @@ static void __init armadillo5x0_init(void) ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); platform_add_devices(devices, ARRAY_SIZE(devices)); + imx31_add_imx_i2c1(NULL); /* Register UART */ - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); /* SMSC9118 IRQ pin */ gpio_direction_input(MX31_PIN_GPIO1_0); @@ -532,7 +531,7 @@ static void __init armadillo5x0_init(void) &armadillo5x0_nor_flash_pdata); /* Register NAND Flash */ - mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata); + imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c new file mode 100644 index 000000000000..63f970f340a2 --- /dev/null +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2010 Eric Benard - eric@eukrea.com + * Copyright (C) 2009 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/memory.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/i2c/tsc2007.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/fsl_devices.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include <mach/eukrea-baseboards.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-mx35.h> +#include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> + +#include "devices-imx35.h" +#include "devices.h" + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const struct imxi2c_platform_data +eukrea_cpuimx35_i2c0_data __initconst = { + .bitrate = 50000, +}; + +#define TSC2007_IRQGPIO (2 * 32 + 2) +static int ts_get_pendown_state(void) +{ + int val = 0; + gpio_free(TSC2007_IRQGPIO); + gpio_request(TSC2007_IRQGPIO, NULL); + gpio_direction_input(TSC2007_IRQGPIO); + + val = gpio_get_value(TSC2007_IRQGPIO); + + gpio_free(TSC2007_IRQGPIO); + gpio_request(TSC2007_IRQGPIO, NULL); + + return val ? 0 : 1; +} + +static int ts_init(void) +{ + gpio_request(TSC2007_IRQGPIO, NULL); + return 0; +} + +static struct tsc2007_platform_data tsc2007_info = { + .model = 2007, + .x_plate_ohms = 180, + .get_pendown_state = ts_get_pendown_state, + .init_platform_hw = ts_init, +}; + +static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, { + I2C_BOARD_INFO("tsc2007", 0x48), + .type = "tsc2007", + .platform_data = &tsc2007_info, + .irq = gpio_to_irq(TSC2007_IRQGPIO), + }, +}; + +static struct platform_device *devices[] __initdata = { + &mxc_fec_device, + &imx_wdt_device0, +}; + +static struct pad_desc eukrea_cpuimx35_pads[] = { + /* UART1 */ + MX35_PAD_CTS1__UART1_CTS, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* I2C1 */ + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, + /* TSC2007 IRQ */ + MX35_PAD_ATA_DA2__GPIO3_2, +}; + +static const struct mxc_nand_platform_data +eukrea_cpuimx35_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +static struct mxc_usbh_platform_data otg_pdata = { + .portsc = MXC_EHCI_MODE_UTMI, + .flags = MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh1_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | + MXC_EHCI_IPPUE_DOWN, +}; + +static struct fsl_usb2_platform_data otg_device_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, +}; + +static int otg_mode_host; + +static int __init eukrea_cpuimx35_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", eukrea_cpuimx35_otg_mode); + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, + ARRAY_SIZE(eukrea_cpuimx35_pads)); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx35_add_imx_uart0(&uart_pdata); + imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); + + i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices, + ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); + imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); + +#if defined(CONFIG_USB_ULPI) + if (otg_mode_host) { + otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &otg_pdata); + } + mxc_register_device(&mxc_usbh1, &usbh1_pdata); +#endif + if (!otg_mode_host) + mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + +#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD + eukrea_mbimxsd_baseboard_init(); +#endif +} + +static void __init eukrea_cpuimx35_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer eukrea_cpuimx35_timer = { + .init = eukrea_cpuimx35_timer_init, +}; + +MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") + /* Maintainer: Eukrea Electromatique */ + .phys_io = MX35_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_irq = mx35_init_irq, + .init_machine = mxc_board_init, + .timer = &eukrea_cpuimx35_timer, +MACHINE_END diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index f085d5d1a6de..5b23e416d6c7 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -16,10 +16,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/gpio.h> @@ -37,13 +33,12 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/board-kzmarm11.h> #include <mach/clock.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/memory.h> +#include "devices-imx31.h" #include "devices.h" #define KZM_ARM11_IO_ADDRESS(x) ( \ @@ -51,6 +46,23 @@ IMX_IO_ADDRESS(x, MX31_CS5) ?: \ MX31_IO_ADDRESS(x)) +/* + * KZM-ARM11-01 Board Control Registers on FPGA + */ +#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) +#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) +#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) +#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) +#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) +#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) +#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) +#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) + +/* + * External UART for touch panel on FPGA + */ +#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) + #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) /* * KZM-ARM11-01 has an external UART on FPGA @@ -173,15 +185,14 @@ static inline int kzm_init_smsc9118(void) #endif #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static void __init kzm_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); } #else static inline void kzm_init_imx_uart(void) diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 58e57291b79d..6fe69e124d30 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> @@ -22,7 +18,6 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/smsc911x.h> #include <linux/platform_device.h> #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> @@ -37,19 +32,47 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31_3ds.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> -#include <mach/mxc_nand.h> -#include <mach/spi.h> +#include <mach/3ds_debugboard.h> + +#include "devices-imx31.h" #include "devices.h" -/*! - * @file mx31_3ds.c - * - * @brief This file contains the board-specific initialization routines. - * - * @ingroup System +/* Definitions for components on the Debug board */ + +/* Base address of CPLD controller on the Debug board */ +#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR) + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR MX3x_CS5_BASE_ADDR + +/* CPLD config and interrupt base address */ +#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000) + +/* status, interrupt */ +#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10) +#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38) +#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40) +#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48) +/* CPLD code version */ +#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50) +/* magic word for debug CPLD */ +#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58) + +/* CPLD IRQ line for external uart, external ethernet etc */ +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) + +#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0) + +#define MXC_MAX_EXP_IO_LINES 16 + +/* + * This file contains the board-specific initialization routines. */ static int mx31_3ds_pins[] = { @@ -145,7 +168,7 @@ static int spi1_internal_chipselect[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master spi1_pdata = { +static const struct spi_imx_master spi1_pdata __initconst = { .chipselect = spi1_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), }; @@ -165,7 +188,8 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { /* * NAND Flash */ -static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { +static const struct mxc_nand_platform_data +mx31_3ds_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, #ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT @@ -182,8 +206,10 @@ static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { #define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR) -static void mx31_3ds_usbotg_init(void) +static int mx31_3ds_usbotg_init(void) { + int err; + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); @@ -197,10 +223,25 @@ static void mx31_3ds_usbotg_init(void) mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - gpio_request(USBOTG_RST_B, "otgusb-reset"); - gpio_direction_output(USBOTG_RST_B, 0); + err = gpio_request(USBOTG_RST_B, "otgusb-reset"); + if (err) { + pr_err("Failed to request the USB OTG reset gpio\n"); + return err; + } + + err = gpio_direction_output(USBOTG_RST_B, 0); + if (err) { + pr_err("Failed to drive the USB OTG reset gpio\n"); + goto usbotg_free_reset; + } + mdelay(1); gpio_set_value(USBOTG_RST_B, 1); + return 0; + +usbotg_free_reset: + gpio_free(USBOTG_RST_B); + return err; } static struct fsl_usb2_platform_data usbotg_pdata = { @@ -208,178 +249,16 @@ static struct fsl_usb2_platform_data usbotg_pdata = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; /* - * Support for the SMSC9217 on the Debug board. - */ - -static struct smsc911x_platform_config smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource smsc911x_resources[] = { - { - .start = LAN9217_BASE_ADDR, - .end = LAN9217_BASE_ADDR + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = EXPIO_INT_ENET, - .end = EXPIO_INT_ENET, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_config, - }, -}; - -/* - * Routines for the CPLD on the debug board. It contains a CPLD handling - * LEDs, switches, interrupts for Ethernet. - */ - -static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc) -{ - uint32_t imr_val; - uint32_t int_valid; - uint32_t expio_irq; - - imr_val = __raw_readw(CPLD_INT_MASK_REG); - int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val; - - expio_irq = MXC_EXP_IO_BASE; - for (; int_valid != 0; int_valid >>= 1, expio_irq++) { - if ((int_valid & 1) == 0) - continue; - generic_handle_irq(expio_irq); - } -} - -/* - * Disable an expio pin's interrupt by setting the bit in the imr. - * @param irq an expio virtual irq number - */ -static void expio_mask_irq(uint32_t irq) -{ - uint16_t reg; - uint32_t expio = MXC_IRQ_TO_EXPIO(irq); - - /* mask the interrupt */ - reg = __raw_readw(CPLD_INT_MASK_REG); - reg |= 1 << expio; - __raw_writew(reg, CPLD_INT_MASK_REG); -} - -/* - * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. - * @param irq an expanded io virtual irq number - */ -static void expio_ack_irq(uint32_t irq) -{ - uint32_t expio = MXC_IRQ_TO_EXPIO(irq); - - /* clear the interrupt status */ - __raw_writew(1 << expio, CPLD_INT_RESET_REG); - __raw_writew(0, CPLD_INT_RESET_REG); - /* mask the interrupt */ - expio_mask_irq(irq); -} - -/* - * Enable a expio pin's interrupt by clearing the bit in the imr. - * @param irq a expio virtual irq number - */ -static void expio_unmask_irq(uint32_t irq) -{ - uint16_t reg; - uint32_t expio = MXC_IRQ_TO_EXPIO(irq); - - /* unmask the interrupt */ - reg = __raw_readw(CPLD_INT_MASK_REG); - reg &= ~(1 << expio); - __raw_writew(reg, CPLD_INT_MASK_REG); -} - -static struct irq_chip expio_irq_chip = { - .ack = expio_ack_irq, - .mask = expio_mask_irq, - .unmask = expio_unmask_irq, -}; - -static int __init mx31_3ds_init_expio(void) -{ - int i; - int ret; - - /* Check if there's a debug board connected */ - if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) || - (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) || - (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) { - /* No Debug board found */ - return -ENODEV; - } - - pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n", - __raw_readw(CPLD_CODE_VER_REG)); - - /* - * Configure INT line as GPIO input - */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq"); - if (ret) - pr_warning("could not get LAN irq gpio\n"); - else - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); - - /* Disable the interrupts and clear the status */ - __raw_writew(0, CPLD_INT_MASK_REG); - __raw_writew(0xFFFF, CPLD_INT_RESET_REG); - __raw_writew(0, CPLD_INT_RESET_REG); - __raw_writew(0x1F, CPLD_INT_MASK_REG); - for (i = MXC_EXP_IO_BASE; - i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); - i++) { - set_irq_chip(i, &expio_irq_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler); - - return 0; -} - -/* - * This structure defines the MX31 memory map. - */ -static struct map_desc mx31_3ds_io_desc[] __initdata = { - { - .virtual = MX31_CS5_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), - .length = MX31_CS5_SIZE, - .type = MT_DEVICE, - }, -}; - -/* * Set up static virtual mappings. */ static void __init mx31_3ds_map_io(void) { mx31_map_io(); - iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc)); } /*! @@ -390,10 +269,10 @@ static void __init mxc_board_init(void) mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_mxc_nand(&mx31_3ds_nand_board_info); - mxc_register_device(&mxc_spi_device1, &spi1_pdata); + imx31_add_spi_imx0(&spi1_pdata); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); @@ -402,8 +281,9 @@ static void __init mxc_board_init(void) mx31_3ds_usbotg_init(); mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata); - if (!mx31_3ds_init_expio()) - platform_device_register(&smsc911x_device); + if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT)) + printk(KERN_WARNING "Init of the debugboard failed, all " + "devices on the board are unusable.\n"); } static void __init mx31_3ds_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index b3d1a1895c20..94b3e7c42404 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -33,8 +29,6 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31ads.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -43,14 +37,45 @@ #include <linux/mfd/wm8350/pmic.h> #endif +#include "devices-imx31.h" #include "devices.h" -/*! - * @file mx31ads.c - * - * @brief This file contains the board-specific initialization routines. - * - * @ingroup System +/* Base address of PBC controller */ +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT +/* Offsets for the PBC Controller register */ + +/* PBC Board interrupt status register */ +#define PBC_INTSTATUS 0x000016 + +/* PBC Board interrupt current status register */ +#define PBC_INTCURR_STATUS 0x000018 + +/* PBC Interrupt mask register set address */ +#define PBC_INTMASK_SET 0x00001A + +/* PBC Interrupt mask register clear address */ +#define PBC_INTMASK_CLEAR 0x00001C + +/* External UART A */ +#define PBC_SC16C652_UARTA 0x010000 + +/* External UART B */ +#define PBC_SC16C652_UARTB 0x010010 + +#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) +#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) +#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) + +#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) +#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) + +#define MXC_MAX_EXP_IO_LINES 16 +/* + * This file contains the board-specific initialization routines. */ #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) @@ -98,7 +123,7 @@ static inline int mxc_init_extuart(void) #endif #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -112,7 +137,7 @@ static unsigned int uart_pins[] = { static inline void mxc_init_imx_uart(void) { mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -475,7 +500,7 @@ static void mxc_init_i2c(void) mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)); mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)); - mxc_register_device(&mxc_i2c_device1, NULL); + imx31_add_imx_i2c1(NULL); } #else static void mxc_init_i2c(void) diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index b2c7f512070f..8f66f65e80e2 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -46,10 +42,10 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> -#include <mach/spi.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" /* @@ -269,12 +265,12 @@ static int spi_internal_chipselect[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master spi0_pdata = { +static const struct spi_imx_master spi0_pdata __initconst = { .chipselect = spi_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; -static struct spi_imx_master spi1_pdata = { +static const struct spi_imx_master spi1_pdata __initconst = { .chipselect = spi_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; @@ -289,6 +285,7 @@ static struct spi_board_info mc13783_dev __initdata = { .bus_num = 1, .chip_select = 0, .platform_data = &mc13783_pdata, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), }; static struct platform_device *devices[] __initdata = { @@ -331,8 +328,8 @@ static void __init mx31lilly_board_init(void) mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1"); mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2"); - mxc_register_device(&mxc_spi_device0, &spi0_pdata); - mxc_register_device(&mxc_spi_device1, &spi1_pdata); + imx31_add_spi_imx0(&spi0_pdata); + imx31_add_spi_imx1(&spi1_pdata); spi_register_board_info(&mc13783_dev, 1); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index 2b6d11400877..da236c497d2a 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -42,14 +38,12 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/board-mx31lite.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/irqs.h> -#include <mach/mxc_nand.h> -#include <mach/spi.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" /* @@ -69,7 +63,8 @@ static unsigned int mx31lite_pins[] = { MX31_PIN_CSPI2_SS2__SS2, }; -static struct mxc_nand_platform_data mx31lite_nand_board_info = { +static const struct mxc_nand_platform_data +mx31lite_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; @@ -112,7 +107,7 @@ static int spi_internal_chipselect[] = { MXC_SPI_CS(0), }; -static struct spi_imx_master spi1_pdata = { +static const struct spi_imx_master spi1_pdata __initconst = { .chipselect = spi_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; @@ -253,9 +248,9 @@ static void __init mxc_board_init(void) /* NOR and NAND flash */ platform_device_register(&physmap_flash_device); - mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info); + imx31_add_mxc_nand(&mx31lite_nand_board_info); - mxc_register_device(&mxc_spi_device1, &spi1_pdata); + imx31_add_spi_imx1(&spi1_pdata); spi_register_board_info(&mc13783_spi_dev, 1); #if defined(CONFIG_USB_ULPI) diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 62b5e40165df..67776bc61c33 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> @@ -42,16 +38,15 @@ #include <mach/board-mx31moboard.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> -#include <mach/i2c.h> #include <mach/mmc.h> #include <mach/mxc_ehci.h> #include <mach/mx3_camera.h> #include <mach/spi.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" static unsigned int moboard_pins[] = { @@ -130,24 +125,36 @@ static struct platform_device mx31moboard_flash = { static int moboard_uart0_init(struct platform_device *pdev) { - gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack"); - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0); - return 0; + int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack"); + if (ret) + return ret; + + ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0); + if (ret) + gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1)); + + return ret; +} + +static void moboard_uart0_exit(struct platform_device *pdev) +{ + gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1)); } -static struct imxuart_platform_data uart0_pdata = { +static const struct imxuart_platform_data uart0_pdata __initconst = { .init = moboard_uart0_init, + .exit = moboard_uart0_exit, }; -static struct imxuart_platform_data uart4_pdata = { +static const struct imxuart_platform_data uart4_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxi2c_platform_data moboard_i2c0_pdata = { +static const struct imxi2c_platform_data moboard_i2c0_data __initconst = { .bitrate = 400000, }; -static struct imxi2c_platform_data moboard_i2c1_pdata = { +static const struct imxi2c_platform_data moboard_i2c1_data __initconst = { .bitrate = 100000, }; @@ -156,7 +163,7 @@ static int moboard_spi1_cs[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master moboard_spi1_master = { +static const struct spi_imx_master moboard_spi1_pdata __initconst = { .chipselect = moboard_spi1_cs, .num_chipselect = ARRAY_SIZE(moboard_spi1_cs), }; @@ -286,7 +293,7 @@ static int moboard_spi2_cs[] = { MXC_SPI_CS(1), }; -static struct spi_imx_master moboard_spi2_master = { +static const struct spi_imx_master moboard_spi2_pdata __initconst = { .chipselect = moboard_spi2_cs, .num_chipselect = ARRAY_SIZE(moboard_spi2_cs), }; @@ -499,15 +506,14 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart0_pdata); - - mxc_register_device(&mxc_uart_device4, &uart4_pdata); + imx31_add_imx_uart0(&uart0_pdata); + imx31_add_imx_uart4(&uart4_pdata); - mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata); - mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata); + imx31_add_imx_i2c0(&moboard_i2c0_data); + imx31_add_imx_i2c1(&moboard_i2c1_data); - mxc_register_device(&mxc_spi_device1, &moboard_spi1_master); - mxc_register_device(&mxc_spi_device2, &moboard_spi2_master); + imx31_add_spi_imx1(&moboard_spi1_pdata); + imx31_add_spi_imx2(&moboard_spi2_pdata); gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index bcac84d4dca4..1c30d7212f17 100644 --- a/arch/arm/mach-mx3/mach-mx35pdk.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -12,10 +12,12 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * This machine is known as: + * - i.MX35 3-Stack Development System + * - i.MX35 Platform Development Kit (i.MX35 PDK) */ #include <linux/types.h> @@ -32,12 +34,12 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx35.h> +#include "devices-imx35.h" #include "devices.h" -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -90,7 +92,7 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx35_add_imx_uart0(&uart_pdata); mxc_register_device(&mxc_otg_udc_device, &usb_pdata); } diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index cce410662383..8a292dd1a714 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -43,20 +39,17 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/board-pcm037.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/i2c.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/ipu.h> #include <mach/mmc.h> #include <mach/mx3_camera.h> #include <mach/mx3fb.h> -#include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" #include "pcm037.h" @@ -225,7 +218,7 @@ static struct platform_device pcm037_flash = { .num_resources = 1, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -279,16 +272,17 @@ static struct platform_device pcm037_sram_device = { .resource = &pcm038_sram_resource, }; -static struct mxc_nand_platform_data pcm037_nand_board_info = { +static const struct mxc_nand_platform_data +pcm037_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; -static struct imxi2c_platform_data pcm037_i2c_1_data = { +static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = { .bitrate = 100000, }; -static struct imxi2c_platform_data pcm037_i2c_2_data = { +static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = { .bitrate = 20000, }; @@ -545,6 +539,7 @@ static struct platform_device pcm970_sja1000 = { .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), }; +#if defined(CONFIG_USB_ULPI) static struct mxc_usbh_platform_data otg_pdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, @@ -554,6 +549,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = { .portsc = MXC_EHCI_MODE_ULPI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +#endif static struct fsl_usb2_platform_data otg_device_pdata = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -581,7 +577,6 @@ __setup("otg_mode=", pcm037_otg_mode); static void __init mxc_board_init(void) { int ret; - u32 tmp; mxc_iomux_set_gpr(MUX_PGP_UH2, 1); @@ -614,9 +609,10 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ + imx31_add_imx_uart1(&uart_pdata); + imx31_add_imx_uart2(&uart_pdata); mxc_register_device(&mxc_w1_master_device, NULL); @@ -634,10 +630,10 @@ static void __init mxc_board_init(void) i2c_register_board_info(1, pcm037_i2c_devices, ARRAY_SIZE(pcm037_i2c_devices)); - mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data); - mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data); + imx31_add_imx_i2c1(&pcm037_i2c1_data); + imx31_add_imx_i2c2(&pcm037_i2c2_data); - mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); + imx31_add_mxc_nand(&pcm037_nand_board_info); mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index 8d386000fc40..c8b98218efee 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c @@ -13,9 +13,6 @@ #include <linux/spi/spi.h> #include <mach/common.h> -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) -#include <mach/spi.h> -#endif #include <mach/iomux-mx3.h> #include <asm/mach-types.h> @@ -64,7 +61,7 @@ static struct spi_board_info pcm037_spi_dev[] = { #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; -struct spi_imx_master pcm037_spi1_master = { +static const struct spi_imx_master pcm037_spi1_pdata __initconst = { .chipselect = pcm037_spi1_cs, .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), }; @@ -184,7 +181,7 @@ static int eet_init_devices(void) /* SPI */ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) - mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master); + imx35_add_spi_imx0(&pcm037_spi1_pdata); #endif platform_device_register(&pcm037_gpio_keys_device); diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 78d9185a9d4b..47f5311b301a 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -40,19 +36,15 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE -#include <mach/i2c.h> -#endif #include <mach/iomux-mx35.h> #include <mach/ipu.h> #include <mach/mx3fb.h> -#include <mach/mxc_nand.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <mach/audmux.h> #include <mach/ssi.h> +#include "devices-imx35.h" #include "devices.h" static const struct fb_videomode fb_modedb[] = { @@ -122,12 +114,12 @@ static struct platform_device pcm043_flash = { .num_resources = 1, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE -static struct imxi2c_platform_data pcm043_i2c_1_data = { +static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { .bitrate = 50000, }; @@ -222,6 +214,9 @@ static struct pad_desc pcm043_pads[] = { MX35_PAD_STXD4__AUDMUX_AUD4_TXD, MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, MX35_PAD_SCK4__AUDMUX_AUD4_TXC, + /* CAN2 */ + MX35_PAD_TX5_RX0__CAN2_TXCAN, + MX35_PAD_TX4_RX1__CAN2_RXCAN, }; #define AC97_GPIO_TXFS (1 * 32 + 31) @@ -304,11 +299,13 @@ static struct imx_ssi_platform_data pcm043_ssi_pdata = { .flags = IMX_SSI_USE_AC97, }; -static struct mxc_nand_platform_data pcm037_nand_board_info = { +static const struct mxc_nand_platform_data +pcm037_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, }; +#if defined(CONFIG_USB_ULPI) static struct mxc_usbh_platform_data otg_pdata = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, @@ -319,6 +316,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = { .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, }; +#endif static struct fsl_usb2_platform_data otg_device_pdata = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -361,17 +359,17 @@ static void __init mxc_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); + imx35_add_imx_uart0(&uart_pdata); + imx35_add_mxc_nand(&pcm037_nand_board_info); mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx35_add_imx_uart1(&uart_pdata); #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE i2c_register_board_info(0, pcm043_i2c_devices, ARRAY_SIZE(pcm043_i2c_devices)); - mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data); + imx35_add_imx_i2c0(&pcm043_i2c0_data); #endif mxc_register_device(&mx3_ipu, &mx3_ipu_data); @@ -390,6 +388,7 @@ static void __init mxc_board_init(void) if (!otg_mode_host) mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); + imx35_add_flexcan1(NULL); } static void __init pcm043_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c index e5b5b8323a17..d44ac70222a5 100644 --- a/arch/arm/mach-mx3/mach-qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> @@ -34,9 +30,9 @@ #include <mach/common.h> #include <asm/page.h> #include <asm/setup.h> -#include <mach/board-qong.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> + +#include "devices-imx31.h" #include "devices.h" /* FPGA defines */ @@ -62,7 +58,7 @@ * This file contains the board-specific initialization routines. */ -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -73,11 +69,11 @@ static int uart_pins[] = { MX31_PIN_RXD1__RXD1 }; -static inline void mxc_init_imx_uart(void) +static inline void __init mxc_init_imx_uart(void) { mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); } static struct resource dnet_resources[] = { @@ -116,7 +112,7 @@ static struct physmap_flash_data qong_flash_data = { static struct resource qong_flash_resource = { .start = MX31_CS0_BASE_ADDR, - .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1, + .end = MX31_CS0_BASE_ADDR + SZ_128M - 1, .flags = IORESOURCE_MEM, }; diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 6858a4f9806c..20e48c0195c4 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/mm.h> @@ -97,9 +93,12 @@ void __init mx35_map_io(void) } #endif +int imx3x_register_gpios(void); + void __init mx31_init_irq(void) { mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); + imx3x_register_gpios(); } void __init mx35_init_irq(void) diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c index 7aebd74a12e8..827fd3c80201 100644 --- a/arch/arm/mach-mx3/mx31lilly-db.c +++ b/arch/arm/mach-mx3/mx31lilly-db.c @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> @@ -36,13 +32,13 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> #include <mach/mmc.h> #include <mach/mx3fb.h> #include <mach/ipu.h> +#include "devices-imx31.h" #include "devices.h" /* @@ -96,7 +92,7 @@ static unsigned int lilly_db_board_pins[] __initdata = { }; /* UART */ -static struct imxuart_platform_data uart_pdata __initdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -217,9 +213,9 @@ void __init mx31lilly_db_init(void) mxc_iomux_setup_multiple_pins(lilly_db_board_pins, ARRAY_SIZE(lilly_db_board_pins), "development board pins"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); + imx31_add_imx_uart2(&uart_pdata); mxc_register_device(&mxcsdhc_device0, &mmc_pdata); mx31lilly_init_fb(); } diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index 5f05bfbec380..7b0e74e275ba 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> @@ -37,12 +33,11 @@ #include <mach/hardware.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31lite.h> #include <mach/mmc.h> -#include <mach/spi.h> +#include "devices-imx31.h" #include "devices.h" /* @@ -76,7 +71,7 @@ static unsigned int litekit_db_board_pins[] __initdata = { }; /* UART */ -static struct imxuart_platform_data uart_pdata __initdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -161,7 +156,7 @@ static int spi_internal_chipselect[] = { MXC_SPI_CS(2), }; -static struct spi_imx_master spi0_pdata = { +static const struct spi_imx_master spi0_pdata __initconst = { .chipselect = spi_internal_chipselect, .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; @@ -201,9 +196,9 @@ void __init mx31lite_db_init(void) mxc_iomux_setup_multiple_pins(litekit_db_board_pins, ARRAY_SIZE(litekit_db_board_pins), "development board pins"); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx31_add_imx_uart0(&uart_pdata); mxc_register_device(&mxcsdhc_device0, &mmc_pdata); - mxc_register_device(&mxc_spi_device0, &spi0_pdata); + imx31_add_spi_imx0(&spi0_pdata); platform_device_register(&litekit_led_device); mxc_register_device(&imx_wdt_device0, NULL); mxc_register_device(&imx_rtc_device0, NULL); diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 582299cb2c08..fc395a7a8599 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/gpio.h> @@ -27,13 +23,13 @@ #include <linux/usb/otg.h> #include <mach/common.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/hardware.h> #include <mach/mmc.h> #include <mach/mxc_ehci.h> #include <mach/ulpi.h> +#include "devices-imx31.h" #include "devices.h" static unsigned int devboard_pins[] = { @@ -56,7 +52,7 @@ static unsigned int devboard_pins[] = { MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -230,7 +226,7 @@ void __init mx31moboard_devboard_init(void) mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), "devboard"); - mxc_register_device(&mxc_uart_device1, &uart_pdata); + imx31_add_imx_uart1(&uart_pdata); mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 4930f8c27e66..0551eb39d97e 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index 293eea6d9d97..40c3e7564cb6 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -10,10 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> @@ -30,7 +26,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx3.h> #include <mach/board-mx31moboard.h> #include <mach/mxc_ehci.h> @@ -38,6 +33,7 @@ #include <media/soc_camera.h> +#include "devices-imx31.h" #include "devices.h" static unsigned int smartbot_pins[] = { @@ -59,7 +55,7 @@ static unsigned int smartbot_pins[] = { MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -183,8 +179,7 @@ void __init mx31moboard_smartbot_init(int board) mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins), "smartbot"); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - + imx31_add_imx_uart1(&uart_pdata); switch (board) { case MX31SMARTBOT: diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 1576d51e676c..0848db5dd364 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -15,4 +15,31 @@ config MACH_MX51_BABBAGE u-boot. This includes specific configurations for the board and its peripherals. +config MACH_MX51_3DS + bool "Support MX51PDK (3DS)" + select MXC_DEBUG_BOARD + help + Include support for MX51PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_EUKREA_CPUIMX51 + bool "Support Eukrea CPUIMX51 module" + help + Include support for Eukrea CPUIMX51 platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51 + default MACH_EUKREA_MBIMX51_BASEBOARD + +config MACH_EUKREA_MBIMX51_BASEBOARD + prompt "Eukrea MBIMX51 development board" + bool + help + This adds board specific devices that can be found on Eukrea's + MBIMX51 evaluation board. + +endchoice + endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index bf23f869ef51..86c66e7f52f3 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -6,4 +6,6 @@ obj-y := cpu.o mm.o clock-mx51.o devices.o obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o - +obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o +obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c new file mode 100644 index 000000000000..623607a20f57 --- /dev/null +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -0,0 +1,293 @@ +/* + * + * Copyright (C) 2010 Eric Bénard <eric@eukrea.com> + * + * based on board-mx51_babbage.c which is + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/fsl_devices.h> + +#include <mach/eukrea-baseboards.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx51.h> +#include <mach/i2c.h> +#include <mach/mxc_ehci.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices.h" + +#define CPUIMX51_USBH1_STP (0*32 + 27) +#define CPUIMX51_QUARTA_GPIO (2*32 + 28) +#define CPUIMX51_QUARTB_GPIO (2*32 + 25) +#define CPUIMX51_QUARTC_GPIO (2*32 + 26) +#define CPUIMX51_QUARTD_GPIO (2*32 + 27) +#define CPUIMX51_QUARTA_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO) +#define CPUIMX51_QUARTB_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO) +#define CPUIMX51_QUARTC_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO) +#define CPUIMX51_QUARTD_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO) +#define CPUIMX51_QUART_XTAL 14745600 +#define CPUIMX51_QUART_REGSHIFT 17 + +/* USB_CTRL_1 */ +#define MX51_USB_CTRL_1_OFFSET 0x10 +#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) + +#define MX51_USB_PLLDIV_12_MHZ 0x00 +#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 +#define MX51_USB_PLL_DIV_24_MHZ 0x02 + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +static struct plat_serial8250_port serial_platform_data[] = { + { + .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), + .irq = CPUIMX51_QUARTA_IRQ, + .irqflags = IRQF_TRIGGER_HIGH, + .uartclk = CPUIMX51_QUART_XTAL, + .regshift = CPUIMX51_QUART_REGSHIFT, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000), + .irq = CPUIMX51_QUARTB_IRQ, + .irqflags = IRQF_TRIGGER_HIGH, + .uartclk = CPUIMX51_QUART_XTAL, + .regshift = CPUIMX51_QUART_REGSHIFT, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000), + .irq = CPUIMX51_QUARTC_IRQ, + .irqflags = IRQF_TRIGGER_HIGH, + .uartclk = CPUIMX51_QUART_XTAL, + .regshift = CPUIMX51_QUART_REGSHIFT, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), + .irq = CPUIMX51_QUARTD_IRQ, + .irqflags = IRQF_TRIGGER_HIGH, + .uartclk = CPUIMX51_QUART_XTAL, + .regshift = CPUIMX51_QUART_REGSHIFT, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + } +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; +#endif + +static struct platform_device *devices[] __initdata = { + &mxc_fec_device, +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + &serial_device, +#endif +}; + +static struct pad_desc eukrea_cpuimx51_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* I2C2 */ + MX51_PAD_GPIO_1_2__I2C2_SCL, + MX51_PAD_GPIO_1_3__I2C2_SDA, + MX51_PAD_NANDF_D10__GPIO_3_30, + + /* QUART IRQ */ + MX51_PAD_NANDF_D15__GPIO_3_25, + MX51_PAD_NANDF_D14__GPIO_3_26, + MX51_PAD_NANDF_D13__GPIO_3_27, + MX51_PAD_NANDF_D12__GPIO_3_28, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + MX51_PAD_USBH1_STP__USBH1_STP, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = { + .bitrate = 100000, +}; + +static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +/* This function is board specific as the bit mask for the plldiv will also +be different for other Freescale SoCs, thus a common bitmask is not +possible and cannot get place in /plat-mxc/ehci.c.*/ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_19_2_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + return 0; +} + +static int initialize_usbh1_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* The clock for the USBH1 ULPI port will come externally from the PHY. */ + v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); + __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); + iounmap(usb_base); + return 0; +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI_WIDE, +}; + +static struct mxc_usbh_platform_data usbh1_config = { + .init = initialize_usbh1_port, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), +}; + +static int otg_mode_host; + +static int __init eukrea_cpuimx51_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", eukrea_cpuimx51_otg_mode); + +/* + * Board specific initialization. + */ +static void __init eukrea_cpuimx51_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, + ARRAY_SIZE(eukrea_cpuimx51_pads)); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq"); + gpio_direction_input(CPUIMX51_QUARTA_GPIO); + gpio_free(CPUIMX51_QUARTA_GPIO); + gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq"); + gpio_direction_input(CPUIMX51_QUARTB_GPIO); + gpio_free(CPUIMX51_QUARTB_GPIO); + gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq"); + gpio_direction_input(CPUIMX51_QUARTC_GPIO); + gpio_free(CPUIMX51_QUARTC_GPIO); + gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq"); + gpio_direction_input(CPUIMX51_QUARTD_GPIO); + gpio_free(CPUIMX51_QUARTD_GPIO); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data); + i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices, + ARRAY_SIZE(eukrea_cpuimx51_i2c_devices)); + + if (otg_mode_host) + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + else { + initialize_otg_port(NULL); + mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata); + } + mxc_register_device(&mxc_usbh1_device, &usbh1_config); + +#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD + eukrea_mbimx51_baseboard_init(); +#endif +} + +static void __init eukrea_cpuimx51_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mxc_timer = { + .init = eukrea_cpuimx51_timer_init, +}; + +MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") + /* Maintainer: Eric Bénard <eric@eukrea.com> */ + .phys_io = MX51_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = eukrea_cpuimx51_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c new file mode 100644 index 000000000000..f95c2fd94667 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -0,0 +1,164 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/input/matrix_keypad.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/iomux-mx51.h> +#include <mach/imx-uart.h> +#include <mach/3ds_debugboard.h> + +#include "devices.h" + +#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6) + +static struct pad_desc mx51_3ds_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* UART2 */ + MX51_PAD_UART2_RXD__UART2_RXD, + MX51_PAD_UART2_TXD__UART2_TXD, + MX51_PAD_EIM_D25__UART2_CTS, + MX51_PAD_EIM_D26__UART2_RTS, + + /* UART3 */ + MX51_PAD_UART3_RXD__UART3_RXD, + MX51_PAD_UART3_TXD__UART3_TXD, + MX51_PAD_EIM_D24__UART3_CTS, + MX51_PAD_EIM_D27__UART3_RTS, + + /* CPLD PARENT IRQ PIN */ + MX51_PAD_GPIO_1_6__GPIO_1_6, + + /* KPP */ + MX51_PAD_KEY_ROW0__KEY_ROW0, + MX51_PAD_KEY_ROW1__KEY_ROW1, + MX51_PAD_KEY_ROW2__KEY_ROW2, + MX51_PAD_KEY_ROW3__KEY_ROW3, + MX51_PAD_KEY_COL0__KEY_COL0, + MX51_PAD_KEY_COL1__KEY_COL1, + MX51_PAD_KEY_COL2__KEY_COL2, + MX51_PAD_KEY_COL3__KEY_COL3, + MX51_PAD_KEY_COL4__KEY_COL4, + MX51_PAD_KEY_COL5__KEY_COL5, +}; + +/* Serial ports */ +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static inline void mxc_init_imx_uart(void) +{ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_pdata); +} +#else /* !SERIAL_IMX */ +static inline void mxc_init_imx_uart(void) +{ +} +#endif /* SERIAL_IMX */ + +#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE) +static int mx51_3ds_board_keymap[] = { + KEY(0, 0, KEY_1), + KEY(0, 1, KEY_2), + KEY(0, 2, KEY_3), + KEY(0, 3, KEY_F1), + KEY(0, 4, KEY_UP), + KEY(0, 5, KEY_F2), + + KEY(1, 0, KEY_4), + KEY(1, 1, KEY_5), + KEY(1, 2, KEY_6), + KEY(1, 3, KEY_LEFT), + KEY(1, 4, KEY_SELECT), + KEY(1, 5, KEY_RIGHT), + + KEY(2, 0, KEY_7), + KEY(2, 1, KEY_8), + KEY(2, 2, KEY_9), + KEY(2, 3, KEY_F3), + KEY(2, 4, KEY_DOWN), + KEY(2, 5, KEY_F4), + + KEY(3, 0, KEY_0), + KEY(3, 1, KEY_OK), + KEY(3, 2, KEY_ESC), + KEY(3, 3, KEY_ENTER), + KEY(3, 4, KEY_MENU), + KEY(3, 5, KEY_BACK) +}; + +static struct matrix_keymap_data mx51_3ds_map_data = { + .keymap = mx51_3ds_board_keymap, + .keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap), +}; + +static void mxc_init_keypad(void) +{ + mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data); +} +#else +static inline void mxc_init_keypad(void) +{ +} +#endif + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, + ARRAY_SIZE(mx51_3ds_pads)); + mxc_init_imx_uart(); + + if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + printk(KERN_WARNING "Init of the debugboard failed, all " + "devices on the board are unusable.\n"); + + mxc_init_keypad(); +} + +static void __init mx51_3ds_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mxc_timer = { + .init = mx51_3ds_timer_init, +}; + +MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") + /* Maintainer: Freescale Semiconductor, Inc. */ + .phys_io = MX51_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index ed885f9d7b73..6e384d92e625 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/i2c.h> #include <linux/gpio.h> #include <linux/delay.h> #include <linux/io.h> @@ -21,6 +22,7 @@ #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx51.h> +#include <mach/i2c.h> #include <mach/mxc_ehci.h> #include <asm/irq.h> @@ -64,6 +66,18 @@ static struct pad_desc mx51babbage_pads[] = { MX51_PAD_EIM_D27__UART3_RTS, MX51_PAD_EIM_D24__UART3_CTS, + /* I2C1 */ + MX51_PAD_EIM_D16__I2C1_SDA, + MX51_PAD_EIM_D19__I2C1_SCL, + + /* I2C2 */ + MX51_PAD_KEY_COL4__I2C2_SCL, + MX51_PAD_KEY_COL5__I2C2_SDA, + + /* HSI2C */ + MX51_PAD_I2C1_CLK__HSI2C_CLK, + MX51_PAD_I2C1_DAT__HSI2C_DAT, + /* USB HOST1 */ MX51_PAD_USBH1_CLK__USBH1_CLK, MX51_PAD_USBH1_DIR__USBH1_DIR, @@ -78,7 +92,7 @@ static struct pad_desc mx51babbage_pads[] = { MX51_PAD_USBH1_DATA7__USBH1_DATA7, /* USB HUB reset line*/ - MX51_PAD_GPIO_1_7__GPIO1_7, + MX51_PAD_GPIO_1_7__GPIO_1_7, }; /* Serial ports */ @@ -99,6 +113,14 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ +static struct imxi2c_platform_data babbage_i2c_data = { + .bitrate = 100000, +}; + +static struct imxi2c_platform_data babbage_hsi2c_data = { + .bitrate = 400000, +}; + static int gpio_usbh1_active(void) { struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27; @@ -230,6 +252,10 @@ static void __init mxc_board_init(void) mxc_init_imx_uart(); platform_add_devices(devices, ARRAY_SIZE(devices)); + mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data); + mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data); + mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data); + if (otg_mode_host) mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); else { diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index d9f612d3370e..6af69def357f 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -758,6 +758,10 @@ static struct clk gpt_32k_clk = { .parent = &ckil_clk, }; +static struct clk kpp_clk = { + .id = 0, +}; + #define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ static struct clk name = { \ .id = i, \ @@ -798,6 +802,14 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); +/* I2C */ +DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, &ipg_clk, NULL); + /* FEC */ DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, NULL, NULL, &ipg_clk, NULL); @@ -815,12 +827,16 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) + _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) + _REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) + _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) }; static void clk_tree_init(void) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 7130449aacdc..1920ff4963b2 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -93,6 +93,64 @@ struct platform_device mxc_fec_device = { .resource = mxc_fec_resources, }; +static struct resource mxc_i2c0_resources[] = { + { + .start = MX51_I2C1_BASE_ADDR, + .end = MX51_I2C1_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_I2C1, + .end = MX51_MXC_INT_I2C1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_i2c_device0 = { + .name = "imx-i2c", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_i2c0_resources), + .resource = mxc_i2c0_resources, +}; + +static struct resource mxc_i2c1_resources[] = { + { + .start = MX51_I2C2_BASE_ADDR, + .end = MX51_I2C2_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = MX51_MXC_INT_I2C2, + .end = MX51_MXC_INT_I2C2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_i2c_device1 = { + .name = "imx-i2c", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_i2c1_resources), + .resource = mxc_i2c1_resources, +}; + +static struct resource mxc_hsi2c_resources[] = { + { + .start = MX51_HSI2C_DMA_BASE_ADDR, + .end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MX51_MXC_INT_HS_I2C, + .end = MX51_MXC_INT_HS_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_hsi2c_device = { + .name = "imx-i2c", + .id = 2, + .num_resources = ARRAY_SIZE(mxc_hsi2c_resources), + .resource = mxc_hsi2c_resources +}; + static u64 usb_dma_mask = DMA_BIT_MASK(32); static struct resource usbotg_resources[] = { @@ -168,34 +226,57 @@ struct platform_device mxc_wdt = { .resource = mxc_wdt_resources, }; +static struct resource mxc_kpp_resources[] = { + { + .start = MX51_MXC_INT_KPP, + .end = MX51_MXC_INT_KPP, + .flags = IORESOURCE_IRQ, + } , { + .start = MX51_KPP_BASE_ADDR, + .end = MX51_KPP_BASE_ADDR + 0x8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_keypad_device = { + .name = "imx-keypad", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_kpp_resources), + .resource = mxc_kpp_resources, +}; + static struct mxc_gpio_port mxc_gpio_ports[] = { { .chip.label = "gpio-0", .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR), .irq = MX51_MXC_INT_GPIO1_LOW, + .irq_high = MX51_MXC_INT_GPIO1_HIGH, .virtual_irq_start = MXC_GPIO_IRQ_START }, { .chip.label = "gpio-1", .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR), .irq = MX51_MXC_INT_GPIO2_LOW, + .irq_high = MX51_MXC_INT_GPIO2_HIGH, .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1 }, { .chip.label = "gpio-2", .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR), .irq = MX51_MXC_INT_GPIO3_LOW, + .irq_high = MX51_MXC_INT_GPIO3_HIGH, .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2 }, { .chip.label = "gpio-3", .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR), .irq = MX51_MXC_INT_GPIO4_LOW, + .irq_high = MX51_MXC_INT_GPIO4_HIGH, .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3 }, }; -int __init mxc_register_gpios(void) +int __init imx51_register_gpios(void) { return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); } diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index c879ae71cd5b..e509cfaad1d4 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -6,3 +6,7 @@ extern struct platform_device mxc_usbdr_host_device; extern struct platform_device mxc_usbh1_device; extern struct platform_device mxc_usbdr_udc_device; extern struct platform_device mxc_wdt; +extern struct platform_device mxc_i2c_device0; +extern struct platform_device mxc_i2c_device1; +extern struct platform_device mxc_hsi2c_device; +extern struct platform_device mxc_keypad_device; diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c new file mode 100644 index 000000000000..ffa93d1d6ef8 --- /dev/null +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -0,0 +1,200 @@ +/* + * + * Copyright (C) 2010 Eric Bénard <eric@eukrea.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/fsl_devices.h> +#include <linux/i2c/tsc2007.h> +#include <linux/leds.h> +#include <linux/input/matrix_keypad.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx51.h> + +#include <asm/mach/arch.h> + +#include "devices.h" + +#define MBIMX51_TSC2007_GPIO (2*32 + 30) +#define MBIMX51_TSC2007_IRQ (MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO) +#define MBIMX51_LED0 (2*32 + 5) +#define MBIMX51_LED1 (2*32 + 6) +#define MBIMX51_LED2 (2*32 + 7) +#define MBIMX51_LED3 (2*32 + 8) + +static struct gpio_led mbimx51_leds[] = { + { + .name = "led0", + .default_trigger = "heartbeat", + .active_low = 1, + .gpio = MBIMX51_LED0, + }, + { + .name = "led1", + .default_trigger = "nand-disk", + .active_low = 1, + .gpio = MBIMX51_LED1, + }, + { + .name = "led2", + .default_trigger = "mmc0", + .active_low = 1, + .gpio = MBIMX51_LED2, + }, + { + .name = "led3", + .default_trigger = "default-on", + .active_low = 1, + .gpio = MBIMX51_LED3, + }, +}; + +static struct gpio_led_platform_data mbimx51_leds_info = { + .leds = mbimx51_leds, + .num_leds = ARRAY_SIZE(mbimx51_leds), +}; + +static struct platform_device mbimx51_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mbimx51_leds_info, + }, +}; + +static struct platform_device *devices[] __initdata = { + &mbimx51_leds_gpio, +}; + +static struct pad_desc mbimx51_pads[] = { + /* UART2 */ + MX51_PAD_UART2_RXD__UART2_RXD, + MX51_PAD_UART2_TXD__UART2_TXD, + + /* UART3 */ + MX51_PAD_UART3_RXD__UART3_RXD, + MX51_PAD_UART3_TXD__UART3_TXD, + MX51_PAD_KEY_COL4__UART3_RTS, + MX51_PAD_KEY_COL5__UART3_CTS, + + /* TSC2007 IRQ */ + MX51_PAD_NANDF_D10__GPIO_3_30, + + /* LEDS */ + MX51_PAD_DISPB2_SER_DIN__GPIO_3_5, + MX51_PAD_DISPB2_SER_DIO__GPIO_3_6, + MX51_PAD_DISPB2_SER_CLK__GPIO_3_7, + MX51_PAD_DISPB2_SER_RS__GPIO_3_8, + + /* KPP */ + MX51_PAD_KEY_ROW0__KEY_ROW0, + MX51_PAD_KEY_ROW1__KEY_ROW1, + MX51_PAD_KEY_ROW2__KEY_ROW2, + MX51_PAD_KEY_ROW3__KEY_ROW3, + MX51_PAD_KEY_COL0__KEY_COL0, + MX51_PAD_KEY_COL1__KEY_COL1, + MX51_PAD_KEY_COL2__KEY_COL2, + MX51_PAD_KEY_COL3__KEY_COL3, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static int mbimx51_keymap[] = { + KEY(0, 0, KEY_1), + KEY(0, 1, KEY_2), + KEY(0, 2, KEY_3), + KEY(0, 3, KEY_UP), + + KEY(1, 0, KEY_4), + KEY(1, 1, KEY_5), + KEY(1, 2, KEY_6), + KEY(1, 3, KEY_LEFT), + + KEY(2, 0, KEY_7), + KEY(2, 1, KEY_8), + KEY(2, 2, KEY_9), + KEY(2, 3, KEY_RIGHT), + + KEY(3, 0, KEY_0), + KEY(3, 1, KEY_DOWN), + KEY(3, 2, KEY_ESC), + KEY(3, 3, KEY_ENTER), +}; + +static struct matrix_keymap_data mbimx51_map_data = { + .keymap = mbimx51_keymap, + .keymap_size = ARRAY_SIZE(mbimx51_keymap), +}; + +static int tsc2007_get_pendown_state(void) +{ + return !gpio_get_value(MBIMX51_TSC2007_GPIO); +} + +struct tsc2007_platform_data tsc2007_data = { + .model = 2007, + .x_plate_ohms = 180, + .get_pendown_state = tsc2007_get_pendown_state, +}; + +static struct i2c_board_info mbimx51_i2c_devices[] = { + { + I2C_BOARD_INFO("tsc2007", 0x48), + .irq = MBIMX51_TSC2007_IRQ, + .platform_data = &tsc2007_data, + }, +}; + +/* + * baseboard initialization. + */ +void __init eukrea_mbimx51_baseboard_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mbimx51_pads, + ARRAY_SIZE(mbimx51_pads)); + + mxc_register_device(&mxc_uart_device1, NULL); + mxc_register_device(&mxc_uart_device2, &uart_pdata); + + gpio_request(MBIMX51_LED0, "LED0"); + gpio_direction_output(MBIMX51_LED0, 1); + gpio_free(MBIMX51_LED0); + gpio_request(MBIMX51_LED1, "LED1"); + gpio_direction_output(MBIMX51_LED1, 1); + gpio_free(MBIMX51_LED1); + gpio_request(MBIMX51_LED2, "LED2"); + gpio_direction_output(MBIMX51_LED2, 1); + gpio_free(MBIMX51_LED2); + gpio_request(MBIMX51_LED3, "LED3"); + gpio_direction_output(MBIMX51_LED3, 1); + gpio_free(MBIMX51_LED3); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_register_device(&mxc_keypad_device, &mbimx51_map_data); + + gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq"); + gpio_direction_input(MBIMX51_TSC2007_GPIO); + set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING); + i2c_register_board_info(1, mbimx51_i2c_devices, + ARRAY_SIZE(mbimx51_i2c_devices)); +} diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index b7677ef80cc4..bc3f30db8d9a 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -65,6 +65,8 @@ void __init mx51_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +int imx51_register_gpios(void); + void __init mx51_init_irq(void) { unsigned long tzic_addr; @@ -80,4 +82,5 @@ void __init mx51_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); + imx51_register_gpios(); } diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h index ce4f59058189..b989baccd675 100644 --- a/arch/arm/mach-mxc91231/crm_regs.h +++ b/arch/arm/mach-mxc91231/crm_regs.h @@ -11,11 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c index 353bd977b393..027af4f0d18a 100644 --- a/arch/arm/mach-mxc91231/devices.c +++ b/arch/arm/mach-mxc91231/devices.c @@ -135,7 +135,7 @@ static struct mxc_gpio_port mxc_gpio_ports[] = { }, }; -int __init mxc_register_gpios(void) +int __init mxc91231_register_gpios(void) { return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); } diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c index 6becda3ff331..aeccfd755fee 100644 --- a/arch/arm/mach-mxc91231/mm.c +++ b/arch/arm/mach-mxc91231/mm.c @@ -15,11 +15,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/mm.h> @@ -88,7 +83,10 @@ void __init mxc91231_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +int mxc91231_register_gpios(void); + void __init mxc91231_init_irq(void) { + mxc91231_register_gpios(); mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR)); } diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c index f035f4185274..89f793adf776 100644 --- a/arch/arm/mach-nomadik/clock.c +++ b/arch/arm/mach-nomadik/clock.c @@ -53,6 +53,10 @@ static struct clk clk_default; } static struct clk_lookup lookups[] = { + { + .con_id = "apb_pclk", + .clk = &clk_default, + }, CLK(&clk_24, "mtu0"), CLK(&clk_24, "mtu1"), CLK(&clk_48, "uart0"), diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index fdd1dd53fa9c..0a9d61d2d229 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -301,6 +301,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = ams_delta_map_io, + .reserve = omap_reserve, .init_irq = ams_delta_init_irq, .init_machine = ams_delta_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 096f2ed102cb..059bac60b35a 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -378,6 +378,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_fsample_map_io, + .reserve = omap_reserve, .init_irq = omap_fsample_init_irq, .init_machine = omap_fsample_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index e1195a3467b8..7a65684d2a15 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -98,6 +98,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_generic_map_io, + .reserve = omap_reserve, .init_irq = omap_generic_init_irq, .init_machine = omap_generic_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index d1100e4f65ac..68b2beda8b99 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -467,6 +467,7 @@ MACHINE_START(OMAP_H2, "TI-H2") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = h2_map_io, + .reserve = omap_reserve, .init_irq = h2_init_irq, .init_machine = h2_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index a53ab8297d25..0b0825fe6751 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -437,6 +437,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = h3_map_io, + .reserve = omap_reserve, .init_irq = h3_init_irq, .init_machine = h3_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 8e313b4b99a9..d70a4f0923f5 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -304,6 +304,7 @@ MACHINE_START(HERALD, "HTC Herald") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = htcherald_map_io, + .reserve = omap_reserve, .init_irq = htcherald_init_irq, .init_machine = htcherald_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 5d12fd35681b..91064b37859a 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -463,6 +463,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = innovator_map_io, + .reserve = omap_reserve, .init_irq = innovator_init_irq, .init_machine = innovator_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 71e1a3fad0ea..8c28b10f3dae 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -400,6 +400,7 @@ MACHINE_START(NOKIA770, "Nokia 770") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_nokia770_map_io, + .reserve = omap_reserve, .init_irq = omap_nokia770_init_irq, .init_machine = omap_nokia770_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 80d862001def..e2a72af30890 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -584,6 +584,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = osk_map_io, + .reserve = omap_reserve, .init_irq = osk_init_irq, .init_machine = osk_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 569b4c9085cd..61a2321b9732 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -373,6 +373,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_palmte_map_io, + .reserve = omap_reserve, .init_irq = omap_palmte_init_irq, .init_machine = omap_palmte_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 6ad49a2cc1a0..21c01c6afcc1 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -321,6 +321,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_palmtt_map_io, + .reserve = omap_reserve, .init_irq = omap_palmtt_init_irq, .init_machine = omap_palmtt_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 6641de9257ef..f32492451533 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -338,10 +338,12 @@ omap_palmz71_map_io(void) } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, - .boot_params = 0x10000100,.map_io = omap_palmz71_map_io, - .init_irq = omap_palmz71_init_irq, - .init_machine = omap_palmz71_init, - .timer = &omap_timer, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_palmz71_map_io, + .reserve = omap_reserve, + .init_irq = omap_palmz71_init_irq, + .init_machine = omap_palmz71_init, + .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index e854d5741c88..8b5ab1fcc405 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -339,6 +339,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_perseus2_map_io, + .reserve = omap_reserve, .init_irq = omap_perseus2_init_irq, .init_machine = omap_perseus2_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 2fb1e5f8e2ec..995566b862bb 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -423,7 +423,8 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_sx1_map_io, - .init_irq = omap_sx1_init_irq, + .reserve = omap_reserve, + .init_irq = omap_sx1_init_irq, .init_machine = omap_sx1_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 87b9436fe7c0..4c483dc1de5c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -287,6 +287,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = voiceblue_map_io, + .reserve = omap_reserve, .init_irq = voiceblue_init_irq, .init_machine = voiceblue_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index d9b8d82530ae..0ce3fec2d257 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -22,7 +22,6 @@ extern void omap_check_revision(void); extern void omap_sram_init(void); -extern void omapfb_reserve_sdram(void); /* * The machine specific code may provide the extra mapping besides the @@ -122,7 +121,6 @@ void __init omap1_map_common_io(void) #endif omap_sram_init(); - omapfb_reserve_sdram(); } /* diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index a11a575745e4..42f49f785c93 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -248,6 +248,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_2430sdp_map_io, + .reserve = omap_reserve, .init_irq = omap_2430sdp_init_irq, .init_machine = omap_2430sdp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index f474a80b8867..dd9c03171a19 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -815,6 +815,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_3430sdp_map_io, + .reserve = omap_reserve, .init_irq = omap_3430sdp_init_irq, .init_machine = omap_3430sdp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 504d2bd222fe..57290fb3fcd7 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -108,6 +108,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_sdp_map_io, + .reserve = omap_reserve, .init_irq = omap_sdp_init_irq, .init_machine = omap_sdp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index e4a5d66b83b8..4bb2c5d151ec 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -402,6 +402,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_4430sdp_map_io, + .reserve = omap_reserve, .init_irq = omap_4430sdp_init_irq, .init_machine = omap_4430sdp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index af383a876943..7da92defcde0 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -472,6 +472,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = am3517_evm_map_io, + .reserve = omap_reserve, .init_irq = am3517_evm_init_irq, .init_machine = am3517_evm_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index aa69fb999748..bd75642aee65 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -346,6 +346,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_apollon_map_io, + .reserve = omap_reserve, .init_irq = omap_apollon_init_irq, .init_machine = omap_apollon_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e679a2cc86c3..bc4c3f807068 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -837,6 +837,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = cm_t35_map_io, + .reserve = omap_reserve, .init_irq = cm_t35_init_irq, .init_machine = cm_t35_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 77022b588816..922b7464807f 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -825,6 +825,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = devkit8000_map_io, + .reserve = omap_reserve, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 16cc06860670..9242902d3a43 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -59,6 +59,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_generic_map_io, + .reserve = omap_reserve, .init_irq = omap_generic_init_irq, .init_machine = omap_generic_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 0665f2c8dc8e..16703fdb3515 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -378,6 +378,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_h4_map_io, + .reserve = omap_reserve, .init_irq = omap_h4_init_irq, .init_machine = omap_h4_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index d55c57b761a9..759e39d1a702 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -543,6 +543,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = igep2_map_io, + .reserve = omap_reserve, .init_irq = igep2_init_irq, .init_machine = igep2_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index fefd7e6e9779..9cd2669113e4 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -417,6 +417,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_ldp_map_io, + .reserve = omap_reserve, .init_irq = omap_ldp_init_irq, .init_machine = omap_ldp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 3ccc34ebdcc7..2565ff08a221 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -667,6 +667,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, + .reserve = omap_reserve, .init_irq = n8x0_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, @@ -677,6 +678,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, + .reserve = omap_reserve, .init_irq = n8x0_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, @@ -687,6 +689,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, + .reserve = omap_reserve, .init_irq = n8x0_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 69b154cdc75d..0ab0c26db4dd 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -519,6 +519,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_beagle_map_io, + .reserve = omap_reserve, .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b95261013812..a3d2e285e116 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -727,6 +727,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_evm_map_io, + .reserve = omap_reserve, .init_irq = omap3_evm_init_irq, .init_machine = omap3_evm_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index db06dc910ba7..c0f4f12eba54 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -601,6 +601,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3pandora_map_io, + .reserve = omap_reserve, .init_irq = omap3pandora_init_irq, .init_machine = omap3pandora_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 2f5f8233dd5b..f05b867c5851 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -571,6 +571,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_touchbook_map_io, + .reserve = omap_reserve, .init_irq = omap3_touchbook_init_irq, .init_machine = omap3_touchbook_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 79ac41400c21..87acb2f198ec 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -495,6 +495,7 @@ MACHINE_START(OVERO, "Gumstix Overo") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = overo_map_io, + .reserve = omap_reserve, .init_irq = overo_init_irq, .init_machine = overo_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1b86b5bb87a2..3bd956f9e19f 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -154,6 +154,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = rx51_map_io, + .reserve = omap_reserve, .init_irq = rx51_init_irq, .init_machine = rx51_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 803ef14cbf2d..ffe188cb18e9 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -95,6 +95,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, + .reserve = omap_reserve, .init_irq = omap_zoom2_init_irq, .init_machine = omap_zoom2_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 33147042485f..5b605eba3e7b 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -77,6 +77,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom_map_io, + .reserve = omap_reserve, .init_irq = omap_zoom_init_irq, .init_machine = omap_zoom_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 41b155acfca7..d33744117ce2 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3166,6 +3166,10 @@ static struct clk uart4_ick_am35xx = { .recalc = &followparent_recalc, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .ops = &clkops_null, +}; /* * clkdev @@ -3173,6 +3177,7 @@ static struct clk uart4_ick_am35xx = { /* XXX At some point we should rename this file to clock3xxx_data.c */ static struct omap_clk omap3xxx_clks[] = { + CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX), CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX), CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX), CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX), diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3cfb425ea67e..4e1f53d0b880 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,7 +33,6 @@ #include <plat/sdrc.h> #include <plat/gpmc.h> #include <plat/serial.h> -#include <plat/vram.h> #include "clock2xxx.h" #include "clock3xxx.h" @@ -241,8 +240,6 @@ static void __init _omap2_map_common_io(void) omap2_check_revision(); omap_sram_init(); - omapfb_reserve_sdram(); - omap_vram_reserve_sdram(); } #ifdef CONFIG_ARCH_OMAP2420 diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 905719a677ae..c897e03e413d 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -26,6 +26,7 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" select I2C_BOARDINFO + select PHYLIB help Say 'Y' here if you want your kernel to support the D-Link DNS-323 platform. diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index fe0de1698edc..a47100d46a4e 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -3,6 +3,10 @@ * * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> * + * Support for HW Rev C1: + * + * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License as * published by the Free Software Foundation; either version 2 of the @@ -23,6 +27,8 @@ #include <linux/input.h> #include <linux/i2c.h> #include <linux/ata_platform.h> +#include <linux/phy.h> +#include <linux/marvell_phy.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/mach/arch.h> @@ -31,6 +37,7 @@ #include "common.h" #include "mpp.h" +/* Rev A1 and B1 */ #define DNS323_GPIO_LED_RIGHT_AMBER 1 #define DNS323_GPIO_LED_LEFT_AMBER 2 #define DNS323_GPIO_SYSTEM_UP 3 @@ -42,6 +49,23 @@ #define DNS323_GPIO_KEY_POWER 9 #define DNS323_GPIO_KEY_RESET 10 +/* Rev C1 */ +#define DNS323C_GPIO_KEY_POWER 1 +#define DNS323C_GPIO_POWER_OFF 2 +#define DNS323C_GPIO_LED_RIGHT_AMBER 8 +#define DNS323C_GPIO_LED_LEFT_AMBER 9 +#define DNS323C_GPIO_LED_POWER 17 +#define DNS323C_GPIO_FAN_BIT1 18 +#define DNS323C_GPIO_FAN_BIT0 19 + +/* Exposed to userspace, do not change */ +enum { + DNS323_REV_A1, /* 0 */ + DNS323_REV_B1, /* 1 */ + DNS323_REV_C1, /* 2 */ +}; + + /**************************************************************************** * PCI setup */ @@ -68,21 +92,12 @@ static struct hw_pci dns323_pci __initdata = { .map_irq = dns323_pci_map_irq, }; -static int __init dns323_dev_id(void) -{ - u32 dev, rev; - - orion5x_pcie_id(&dev, &rev); - - return dev; -} - static int __init dns323_pci_init(void) { - /* The 5182 doesn't really use its PCI bus, and initialising PCI + /* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI * gets in the way of initialising the SATA controller. */ - if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID) + if (machine_is_dns323() && system_rev == DNS323_REV_A1) pci_common_init(&dns323_pci); return 0; @@ -221,7 +236,7 @@ static int __init dns323_read_mac_addr(void) } iounmap(mac_page); - printk("DNS323: Found ethernet MAC address: "); + printk("DNS-323: Found ethernet MAC address: "); for (i = 0; i < 6; i++) printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); @@ -259,12 +274,11 @@ static int dns323_gpio_blink_set(unsigned gpio, int state, return 0; } -static struct gpio_led dns323_leds[] = { +static struct gpio_led dns323ab_leds[] = { { .name = "power:blue", .gpio = DNS323_GPIO_LED_POWER2, - .default_trigger = "timer", - .active_low = 1, + .default_trigger = "default-on", }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, @@ -276,9 +290,34 @@ static struct gpio_led dns323_leds[] = { }, }; -static struct gpio_led_platform_data dns323_led_data = { - .num_leds = ARRAY_SIZE(dns323_leds), - .leds = dns323_leds, + +static struct gpio_led dns323c_leds[] = { + { + .name = "power:blue", + .gpio = DNS323C_GPIO_LED_POWER, + .default_trigger = "timer", + .active_low = 1, + }, { + .name = "right:amber", + .gpio = DNS323C_GPIO_LED_RIGHT_AMBER, + .active_low = 1, + }, { + .name = "left:amber", + .gpio = DNS323C_GPIO_LED_LEFT_AMBER, + .active_low = 1, + }, +}; + + +static struct gpio_led_platform_data dns323ab_led_data = { + .num_leds = ARRAY_SIZE(dns323ab_leds), + .leds = dns323ab_leds, + .gpio_blink_set = dns323_gpio_blink_set, +}; + +static struct gpio_led_platform_data dns323c_led_data = { + .num_leds = ARRAY_SIZE(dns323c_leds), + .leds = dns323c_leds, .gpio_blink_set = dns323_gpio_blink_set, }; @@ -286,7 +325,7 @@ static struct platform_device dns323_gpio_leds = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &dns323_led_data, + .platform_data = &dns323ab_led_data, }, }; @@ -294,7 +333,7 @@ static struct platform_device dns323_gpio_leds = { * GPIO Attached Keys */ -static struct gpio_keys_button dns323_buttons[] = { +static struct gpio_keys_button dns323ab_buttons[] = { { .code = KEY_RESTART, .gpio = DNS323_GPIO_KEY_RESET, @@ -308,9 +347,23 @@ static struct gpio_keys_button dns323_buttons[] = { }, }; -static struct gpio_keys_platform_data dns323_button_data = { - .buttons = dns323_buttons, - .nbuttons = ARRAY_SIZE(dns323_buttons), +static struct gpio_keys_platform_data dns323ab_button_data = { + .buttons = dns323ab_buttons, + .nbuttons = ARRAY_SIZE(dns323ab_buttons), +}; + +static struct gpio_keys_button dns323c_buttons[] = { + { + .code = KEY_POWER, + .gpio = DNS323C_GPIO_KEY_POWER, + .desc = "Power Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data dns323c_button_data = { + .buttons = dns323c_buttons, + .nbuttons = ARRAY_SIZE(dns323c_buttons), }; static struct platform_device dns323_button_device = { @@ -318,7 +371,7 @@ static struct platform_device dns323_button_device = { .id = -1, .num_resources = 0, .dev = { - .platform_data = &dns323_button_data, + .platform_data = &dns323ab_button_data, }, }; @@ -332,7 +385,7 @@ static struct mv_sata_platform_data dns323_sata_data = { /**************************************************************************** * General Setup */ -static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = { +static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = { { 0, MPP_PCIE_RST_OUTn }, { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ @@ -356,7 +409,7 @@ static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = { { -1 }, }; -static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = { +static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = { { 0, MPP_UNUSED }, { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ @@ -380,15 +433,57 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = { { -1 }, }; +static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* ? input */ + { 1, MPP_GPIO }, /* input power switch (0 = pressed) */ + { 2, MPP_GPIO }, /* output power off */ + { 3, MPP_UNUSED }, /* ? output */ + { 4, MPP_UNUSED }, /* ? output */ + { 5, MPP_UNUSED }, /* ? output */ + { 6, MPP_UNUSED }, /* ? output */ + { 7, MPP_UNUSED }, /* ? output */ + { 8, MPP_GPIO }, /* i/o right amber LED */ + { 9, MPP_GPIO }, /* i/o left amber LED */ + { 10, MPP_GPIO }, /* input */ + { 11, MPP_UNUSED }, + { 12, MPP_SATA_LED }, + { 13, MPP_SATA_LED }, + { 14, MPP_SATA_LED }, + { 15, MPP_SATA_LED }, + { 16, MPP_UNUSED }, + { 17, MPP_GPIO }, /* power button LED */ + { 18, MPP_GPIO }, /* fan speed bit 0 */ + { 19, MPP_GPIO }, /* fan speed bit 1 */ + { -1 }, +}; + +/* Rev C1 Fan speed notes: + * + * The fan is controlled by 2 GPIOs on this board. The settings + * of the bits is as follow: + * + * GPIO 18 GPIO 19 Fan + * + * 0 0 stopped + * 0 1 low speed + * 1 0 high speed + * 1 1 don't do that (*) + * + * (*) I think the two bits control two feed-in resistors into a fixed + * PWN circuit, setting both bits will basically go a 'bit' faster + * than high speed, but d-link doesn't do it and you may get out of + * HW spec so don't do it. + */ + /* - * On the DNS-323 the following devices are attached via I2C: + * On the DNS-323 A1 and B1 the following devices are attached via I2C: * * i2c addr | chip | description * 0x3e | GMT G760Af | fan speed PWM controller * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) * 0x68 | ST M41T80 | RTC w/ alarm */ -static struct i2c_board_info __initdata dns323_i2c_devices[] = { +static struct i2c_board_info __initdata dns323ab_i2c_devices[] = { { I2C_BOARD_INFO("g760a", 0x3e), }, { @@ -398,36 +493,140 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = { }, }; +/* + * On the DNS-323 C1 the following devices are attached via I2C: + * + * i2c addr | chip | description + * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) + * 0x68 | ST M41T80 | RTC w/ alarm + */ +static struct i2c_board_info __initdata dns323c_i2c_devices[] = { + { + I2C_BOARD_INFO("lm75", 0x48), + }, { + I2C_BOARD_INFO("m41t80", 0x68), + }, +}; + /* DNS-323 rev. A specific power off method */ static void dns323a_power_off(void) { - pr_info("%s: triggering power-off...\n", __func__); + pr_info("DNS-323: Triggering power-off...\n"); gpio_set_value(DNS323_GPIO_POWER_OFF, 1); } /* DNS-323 rev B specific power off method */ static void dns323b_power_off(void) { - pr_info("%s: triggering power-off...\n", __func__); + pr_info("DNS-323: Triggering power-off...\n"); /* Pin has to be changed to 1 and back to 0 to do actual power off. */ gpio_set_value(DNS323_GPIO_POWER_OFF, 1); mdelay(100); gpio_set_value(DNS323_GPIO_POWER_OFF, 0); } +/* DNS-323 rev. C specific power off method */ +static void dns323c_power_off(void) +{ + pr_info("DNS-323: Triggering power-off...\n"); + gpio_set_value(DNS323C_GPIO_POWER_OFF, 1); +} + +static int dns323c_phy_fixup(struct phy_device *phy) +{ + phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS; + + return 0; +} + +static int __init dns323_identify_rev(void) +{ + u32 dev, rev, i, reg; + + pr_debug("DNS-323: Identifying board ... \n"); + + /* Rev A1 has a 5181 */ + orion5x_pcie_id(&dev, &rev); + if (dev == MV88F5181_DEV_ID) { + pr_debug("DNS-323: 5181 found, board is A1\n"); + return DNS323_REV_A1; + } + pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n"); + + /* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is + * a bit gross but we want to do that without links into the eth + * driver so let's poke at it directly. We default to rev B1 in + * case the accesses fail + */ + +#define ETH_SMI_REG (ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004) +#define SMI_BUSY 0x10000000 +#define SMI_READ_VALID 0x08000000 +#define SMI_OPCODE_READ 0x04000000 +#define SMI_OPCODE_WRITE 0x00000000 + + for (i = 0; i < 1000; i++) { + reg = readl(ETH_SMI_REG); + if (!(reg & SMI_BUSY)) + break; + } + if (i >= 1000) { + pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n"); + return DNS323_REV_B1; + } + writel((3 << 21) /* phy ID reg */ | + (8 << 16) /* phy addr */ | + SMI_OPCODE_READ, ETH_SMI_REG); + for (i = 0; i < 1000; i++) { + reg = readl(ETH_SMI_REG); + if (reg & SMI_READ_VALID) + break; + } + if (i >= 1000) { + pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n"); + return DNS323_REV_B1; + } + pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff); + + /* Note: the Marvell tools mask the ID with 0x3f0 before comparison + * but I don't see that making a difference here, at least with + * any known Marvell PHY ID + */ + switch(reg & 0xfff0) { + case 0x0cc0: /* MV88E1111 */ + return DNS323_REV_B1; + case 0x0e10: /* MV88E1118 */ + return DNS323_REV_C1; + default: + pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n", + reg & 0xffff); + } + return DNS323_REV_B1; +} + static void __init dns323_init(void) { /* Setup basic Orion functions. Need to be called early. */ orion5x_init(); + /* Identify revision */ + system_rev = dns323_identify_rev(); + pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev); + /* Just to be tricky, the 5182 has a completely different * set of MPP modes to the 5181. */ - if (dns323_dev_id() == MV88F5182_DEV_ID) - orion5x_mpp_conf(dns323_mv88f5182_mpp_modes); - else { - orion5x_mpp_conf(dns323_mv88f5181_mpp_modes); + switch(system_rev) { + case DNS323_REV_A1: + orion5x_mpp_conf(dns323a_mpp_modes); writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */ + break; + case DNS323_REV_B1: + orion5x_mpp_conf(dns323b_mpp_modes); + break; + case DNS323_REV_C1: + orion5x_mpp_conf(dns323c_mpp_modes); + break; } /* setup flash mapping @@ -436,53 +635,96 @@ static void __init dns323_init(void) orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); platform_device_register(&dns323_nor_flash); - /* The 5181 power LED is active low and requires - * DNS323_GPIO_LED_POWER1 to also be low. - */ - if (dns323_dev_id() == MV88F5181_DEV_ID) { - dns323_leds[0].active_low = 1; - gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); - gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); + /* Sort out LEDs, Buttons and i2c devices */ + switch(system_rev) { + case DNS323_REV_A1: + /* The 5181 power LED is active low and requires + * DNS323_GPIO_LED_POWER1 to also be low. + */ + dns323ab_leds[0].active_low = 1; + gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); + gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); + /* Fall through */ + case DNS323_REV_B1: + i2c_register_board_info(0, dns323ab_i2c_devices, + ARRAY_SIZE(dns323ab_i2c_devices)); + break; + case DNS323_REV_C1: + /* Hookup LEDs & Buttons */ + dns323_gpio_leds.dev.platform_data = &dns323c_led_data; + dns323_button_device.dev.platform_data = &dns323c_button_data; + + /* Hookup i2c devices and fan driver */ + i2c_register_board_info(0, dns323c_i2c_devices, + ARRAY_SIZE(dns323c_i2c_devices)); + platform_device_register_simple("dns323c-fan", 0, NULL, 0); + + /* Register fixup for the PHY LEDs */ + phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118, + MARVELL_PHY_ID_MASK, + dns323c_phy_fixup); } platform_device_register(&dns323_gpio_leds); - platform_device_register(&dns323_button_device); - i2c_register_board_info(0, dns323_i2c_devices, - ARRAY_SIZE(dns323_i2c_devices)); - /* * Configure peripherals. */ if (dns323_read_mac_addr() < 0) - printk("DNS323: Failed to read MAC address\n"); - + printk("DNS-323: Failed to read MAC address\n"); orion5x_ehci0_init(); orion5x_eth_init(&dns323_eth_data); orion5x_i2c_init(); orion5x_uart0_init(); - /* The 5182 has its SATA controller on-chip, and needs its own little - * init routine. - */ - if (dns323_dev_id() == MV88F5182_DEV_ID) + /* Remaining GPIOs */ + switch(system_rev) { + case DNS323_REV_A1: + /* Poweroff GPIO */ + if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || + gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) + pr_err("DNS-323: failed to setup power-off GPIO\n"); + pm_power_off = dns323a_power_off; + break; + case DNS323_REV_B1: + /* 5182 built-in SATA init */ orion5x_sata_init(&dns323_sata_data); - /* The 5182 has flag to indicate the system is up. Without this flag - * set, power LED will flash and cannot be controlled via leds-gpio. - */ - if (dns323_dev_id() == MV88F5182_DEV_ID) - gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1); - - /* Register dns323 specific power-off method */ - if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) - pr_err("DNS323: failed to setup power-off GPIO\n"); - if (dns323_dev_id() == MV88F5182_DEV_ID) + /* The DNS323 rev B1 has flag to indicate the system is up. + * Without this flag set, power LED will flash and cannot be + * controlled via leds-gpio. + */ + if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0) + gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1); + + /* Poweroff GPIO */ + if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || + gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) + pr_err("DNS-323: failed to setup power-off GPIO\n"); pm_power_off = dns323b_power_off; - else - pm_power_off = dns323a_power_off; + break; + case DNS323_REV_C1: + /* 5182 built-in SATA init */ + orion5x_sata_init(&dns323_sata_data); + + /* Poweroff GPIO */ + if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 || + gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0) + pr_err("DNS-323: failed to setup power-off GPIO\n"); + pm_power_off = dns323c_power_off; + + /* Now, -this- should theorically be done by the sata_mv driver + * once I figure out what's going on there. Maybe the behaviour + * of the LEDs should be somewhat passed via the platform_data. + * for now, just whack the register and make the LEDs happy + * + * Note: AFAIK, rev B1 needs the same treatement but I'll let + * somebody else test it. + */ + writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c); + break; + } } /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index 60e734c10458..a1d6e46ab035 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -25,6 +25,8 @@ static inline void arch_reset(char mode, const char *cmd) */ orion5x_setbits(RSTOUTn_MASK, (1 << 2)); orion5x_setbits(CPU_SOFT_RESET, 1); + mdelay(200); + orion5x_clrbits(CPU_SOFT_RESET, 1); } diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 161fc2d61207..0f3130599770 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -35,7 +35,7 @@ static int cmx2xx_it8152_irq_gpio; * This is really ugly and we need a better way of specifying * DMA-capable regions of memory. */ -void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size, +void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size) { unsigned int sz = SZ_64M >> PAGE_SHIFT; @@ -46,7 +46,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size, /* * Only adjust if > 64M on current system */ - if (node || (zone_size[0] <= sz)) + if (zone_size[0] <= sz) return; zone_size[1] = zone_size[0] - sz; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 51ffa6afb675..461ba4080155 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -715,7 +715,6 @@ static void __init fixup_corgi(struct machine_desc *desc, sharpsl_save_param(); mi->nr_banks=1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; if (machine_is_corgi()) mi->bank[0].size = (32*1024*1024); else diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 96ed13081639..a0ab3082a000 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -34,7 +34,6 @@ void __init eseries_fixup(struct machine_desc *desc, { mi->nr_banks=1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; if (machine_is_e800()) mi->bank[0].size = (128*1024*1024); else diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 890fb90a672f..c6305c5b8a72 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -26,8 +26,7 @@ extern unsigned int get_clk_frequency_khz(int info); #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ - mi->bank[__nr].size = (__size), \ - mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) + mi->bank[__nr].size = (__size) #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index f626730ee42e..92361a66b223 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -17,24 +17,11 @@ */ #define PHYS_OFFSET UL(0xa0000000) -/* - * The nodes are matched with the physical SDRAM banks as follows: - * - * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff - * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff - * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff - * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff - * - * This needs a node mem size of 26 bits. - */ -#define NODE_MEM_SIZE_BITS 26 - #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -void cmx2xx_pci_adjust_zones(int node, unsigned long *size, - unsigned long *holes); +void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes); -#define arch_adjust_zones(node, size, holes) \ - cmx2xx_pci_adjust_zones(node, size, holes) +#define arch_adjust_zones(size, holes) \ + cmx2xx_pci_adjust_zones(size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M) diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 5305a3993e69..5e92d84fe50d 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -21,6 +21,7 @@ #include <linux/irq.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/memblock.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> @@ -396,6 +397,11 @@ static void __init palmt5_udc_init(void) } } +static void __init palmt5_reserve(void) +{ + memblock_reserve(0xa0200000, 0x1000); +} + static void __init palmt5_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); @@ -421,6 +427,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .reserve = palmt5_reserve, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = palmt5_init diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index d8b4469607a1..3d0c9cc2a406 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -20,6 +20,7 @@ #include <linux/irq.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/memblock.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> @@ -633,6 +634,12 @@ static void __init treo_lcd_power_init(void) treo_lcd_screen.pxafb_lcd_power = treo_lcd_power; } +static void __init treo_reserve(void) +{ + memblock_reserve(0xa0000000, 0x1000); + memblock_reserve(0xa2000000, 0x1000); +} + static void __init treo_init(void) { pxa_set_ffuart_info(NULL); @@ -668,6 +675,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .io_pg_offst = io_p2v(0x40000000), .boot_params = 0xa0000100, .map_io = pxa_map_io, + .reserve = treo_reserve, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = treo680_init, @@ -691,6 +699,7 @@ MACHINE_START(CENTRO, "Palm Centro 685") .io_pg_offst = io_p2v(0x40000000), .boot_params = 0xa0000100, .map_io = pxa_map_io, + .reserve = treo_reserve, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = centro_init, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index f4abdaafdac4..bc2758b54446 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -463,7 +463,6 @@ static void __init fixup_poodle(struct machine_desc *desc, sharpsl_save_param(); mi->nr_banks=1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; mi->bank[0].size = (32*1024*1024); } diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index c1048a35f187..51756c723557 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -847,7 +847,6 @@ static void __init fixup_spitz(struct machine_desc *desc, sharpsl_save_param(); mi->nr_banks = 1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; mi->bank[0].size = (64*1024*1024); } diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 7512b822c6ca..83cc3a18c2e9 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -948,7 +948,6 @@ static void __init fixup_tosa(struct machine_desc *desc, sharpsl_save_param(); mi->nr_banks=1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; mi->bank[0].size = (64*1024*1024); } diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 02e9fdeb8faf..2fa38df28414 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -61,12 +61,11 @@ void __iomem *gic_cpu_base_addr; /* * Adjust the zones if there are restrictions for DMA access. */ -void __init realview_adjust_zones(int node, unsigned long *size, - unsigned long *hole) +void __init realview_adjust_zones(unsigned long *size, unsigned long *hole) { unsigned long dma_size = SZ_256M >> PAGE_SHIFT; - if (!machine_is_realview_pbx() || node || (size[0] <= dma_size)) + if (!machine_is_realview_pbx() || size[0] <= dma_size) return; size[ZONE_NORMAL] = size[0] - dma_size; @@ -232,6 +231,21 @@ static unsigned int realview_mmc_status(struct device *dev) struct amba_device *adev = container_of(dev, struct amba_device, dev); u32 mask; + if (machine_is_realview_pb1176()) { + static bool inserted = false; + + /* + * The PB1176 does not have the status register, + * assume it is inserted at startup, then invert + * for each call so card insertion/removal will + * be detected anyway. This will not be called if + * GPIO on PL061 is active, which is the proper + * way to do this on the PB1176. + */ + inserted = !inserted; + return inserted ? 0 : 1; + } + if (adev->res.start == REALVIEW_MMCI0_BASE) mask = 1; else @@ -300,8 +314,13 @@ static struct clk ref24_clk = { .rate = 24000000, }; +static struct clk dummy_apb_pclk; + static struct clk_lookup lookups[] = { - { /* UART0 */ + { /* Bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ .dev_id = "dev:uart0", .clk = &ref24_clk, }, { /* UART1 */ @@ -313,6 +332,12 @@ static struct clk_lookup lookups[] = { }, { /* UART3 */ .dev_id = "fpga:uart3", .clk = &ref24_clk, + }, { /* UART3 is on the dev chip in PB1176 */ + .dev_id = "dev:uart3", + .clk = &ref24_clk, + }, { /* UART4 only exists in PB1176 */ + .dev_id = "fpga:uart4", + .clk = &ref24_clk, }, { /* KMI0 */ .dev_id = "fpga:kmi0", .clk = &ref24_clk, @@ -322,12 +347,15 @@ static struct clk_lookup lookups[] = { }, { /* MMC0 */ .dev_id = "fpga:mmc0", .clk = &ref24_clk, - }, { /* EB:CLCD */ + }, { /* CLCD is in the PB1176 and EB DevChip */ .dev_id = "dev:clcd", .clk = &oscvco_clk, }, { /* PB:CLCD */ .dev_id = "issp:clcd", .clk = &oscvco_clk, + }, { /* SSP */ + .dev_id = "dev:ssp0", + .clk = &ref24_clk, } }; @@ -342,7 +370,7 @@ static int __init clk_init(void) return 0; } -arch_initcall(clk_init); +core_initcall(clk_init); /* * CLCD support. diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 2f5ccb298858..002ab5d8c11c 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -26,6 +26,7 @@ /* * Peripheral addresses */ +#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */ #define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ #define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ #define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 830055bb8628..5c3c625e3e04 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -40,6 +40,7 @@ #define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) #define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) #define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ #define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ #define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ #define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ @@ -73,7 +74,6 @@ #define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ #define IRQ_PB1176_GPIO0 -1 -#define IRQ_PB1176_SSP -1 #define IRQ_PB1176_SCTL -1 #define NR_GIC_PB1176 2 diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 2417bbcf97fd..5dafc157b276 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -30,10 +30,9 @@ #endif #if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA) -extern void realview_adjust_zones(int node, unsigned long *size, - unsigned long *hole); -#define arch_adjust_zones(node, size, hole) \ - realview_adjust_zones(node, size, hole) +extern void realview_adjust_zones(unsigned long *size, unsigned long *hole); +#define arch_adjust_zones(size, hole) \ + realview_adjust_zones(size, hole) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M) diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 4425018fab82..991c1f8390e2 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <mach/hardware.h> @@ -129,6 +130,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView EB AMBA devices */ @@ -213,7 +220,7 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -324,6 +331,26 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct resource char_lcd_resources[] = { + { + .start = REALVIEW_CHAR_LCD_BASE, + .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EB_CHARLCD, + .end = IRQ_EB_CHARLCD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device char_lcd_device = { + .name = "arm-charlcd", + .id = -1, + .num_resources = ARRAY_SIZE(char_lcd_resources), + .resource = char_lcd_resources, +}; + static void __init gic_init_irq(void) { if (core_tile_eb11mp() || core_tile_a9mp()) { @@ -442,6 +469,7 @@ static void __init realview_eb_init(void) realview_flash_register(&realview_eb_flash_resource, 1); platform_device_register(&realview_i2c_device); + platform_device_register(&char_lcd_device); eth_device_register(); realview_usb_register(realview_eb_isp1761_resources); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 099a1f125cf8..d2be12eb829e 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <mach/hardware.h> @@ -123,6 +124,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView PB1176 AMBA devices */ @@ -144,8 +151,6 @@ static struct pl061_platform_data gpio2_plat_data = { #define MPMC_DMA { 0, 0 } #define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } #define PB1176_CLCD_DMA { 0, 0 } -#define DMAC_IRQ { IRQ_PB1176_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } #define SCTL_DMA { 0, 0 } #define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } @@ -166,7 +171,9 @@ static struct pl061_platform_data gpio2_plat_data = { #define PB1176_UART2_DMA { 11, 10 } #define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } #define PB1176_UART3_DMA { 0x86, 0x87 } -#define PB1176_SSP_IRQ { IRQ_PB1176_SSP, NO_IRQ } +#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } +#define PB1176_UART4_DMA { 0, 0 } +#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } #define PB1176_SSP_DMA { 9, 8 } /* FPGA Primecells */ @@ -174,7 +181,7 @@ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PB1176_UART3, NULL); +AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); /* DevChip Primecells */ AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); @@ -188,18 +195,16 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, NULL); - -/* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PB1176_CLCD, &clcd_plat_data); -//AMBA_DEVICE(dmac, "issp:dmac", PB1176_DMAC, NULL); +AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); +AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); static struct amba_device *amba_devs[] __initdata = { -// &dmac_device, &uart0_device, &uart1_device, &uart2_device, &uart3_device, + &uart4_device, &smc_device, &clcd_device, &sctl_device, @@ -276,6 +281,26 @@ static struct platform_device pmu_device = { .resource = &pmu_resource, }; +static struct resource char_lcd_resources[] = { + { + .start = REALVIEW_CHAR_LCD_BASE, + .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB1176_CHARLCD, + .end = IRQ_PB1176_CHARLCD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device char_lcd_device = { + .name = "arm-charlcd", + .id = -1, + .num_resources = ARRAY_SIZE(char_lcd_resources), + .resource = char_lcd_resources, +}; + static void __init gic_init_irq(void) { /* ARM1176 DevChip GIC, primary */ @@ -338,6 +363,7 @@ static void __init realview_pb1176_init(void) platform_device_register(&realview_i2c_device); realview_usb_register(realview_pb1176_isp1761_resources); platform_device_register(&pmu_device); + platform_device_register(&char_lcd_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 0e07a5ccb75f..d591bc00b86e 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <mach/hardware.h> @@ -124,6 +125,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView PB11MPCore AMBA devices */ @@ -190,7 +197,7 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index ac2f06f1ca50..6c37621217bc 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <asm/irq.h> @@ -114,6 +115,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView PBA8Core AMBA devices */ @@ -180,7 +187,7 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 08fd683adc4c..9428eff0b116 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -24,6 +24,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <asm/irq.h> @@ -136,6 +137,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView PBXCore AMBA devices */ @@ -202,7 +209,7 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 779b45b3f80f..3ba3bab139d0 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/list.h> +#include <linux/memblock.h> #include <linux/timer.h> #include <linux/init.h> #include <linux/sysdev.h> @@ -304,6 +305,13 @@ static void __init h1940_map_io(void) s3c_pm_init(); } +/* H1940 and RX3715 need to reserve this for suspend */ +static void __init h1940_reserve(void) +{ + memblock_reserve(0x30003000, 0x1000); + memblock_reserve(0x30081000, 0x1000); +} + static void __init h1940_init_irq(void) { s3c24xx_init_irq(); @@ -346,6 +354,7 @@ MACHINE_START(H1940, "IPAQ-H1940") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = h1940_map_io, + .reserve = h1940_reserve, .init_irq = h1940_init_irq, .init_machine = h1940_init, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index ba93a356a839..054c9f92232a 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -119,7 +119,6 @@ static void __init smdk2413_fixup(struct machine_desc *desc, mi->nr_banks=1; mi->bank[0].start = 0x30000000; mi->bank[0].size = SZ_64M; - mi->bank[0].node = 0; } } diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 3ca9265b6997..f291ac25d312 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -137,7 +137,6 @@ static void __init vstms_fixup(struct machine_desc *desc, mi->nr_banks=1; mi->bank[0].start = 0x30000000; mi->bank[0].size = SZ_64M; - mi->bank[0].node = 0; } } diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 8603b577a24b..142d1f921176 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/list.h> +#include <linux/memblock.h> #include <linux/delay.h> #include <linux/timer.h> #include <linux/init.h> @@ -570,12 +571,20 @@ static void __init rx1950_init_machine(void) platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); } +/* H1940 and RX3715 need to reserve this for suspend */ +static void __init rx1950_reserve(void) +{ + memblock_reserve(0x30003000, 0x1000); + memblock_reserve(0x30081000, 0x1000); +} + MACHINE_START(RX1950, "HP iPAQ RX1950") /* Maintainers: Vasily Khoruzhick */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = rx1950_map_io, + .reserve = rx1950_reserve, .init_irq = s3c24xx_init_irq, .init_machine = rx1950_init_machine, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index d2946de3f365..6bb44f75a9ce 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/list.h> +#include <linux/memblock.h> #include <linux/timer.h> #include <linux/init.h> #include <linux/tty.h> @@ -191,6 +192,13 @@ static void __init rx3715_map_io(void) s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); } +/* H1940 and RX3715 need to reserve this for suspend */ +static void __init rx3715_reserve(void) +{ + memblock_reserve(0x30003000, 0x1000); + memblock_reserve(0x30081000, 0x1000); +} + static void __init rx3715_init_irq(void) { s3c24xx_init_irq(); @@ -214,6 +222,7 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = rx3715_map_io, + .reserve = rx3715_reserve, .init_irq = rx3715_init_irq, .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index ec03f187c52b..b7a9a601c2d1 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -13,8 +13,7 @@ extern void __init sa1100_init_gpio(void); #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ - mi->bank[__nr].size = (__size), \ - mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) + mi->bank[__nr].size = (__size) extern void (*sa1100fb_backlight_power)(int on); extern void (*sa1100fb_lcd_power)(int on); diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index d5277f9bee77..128a1dfa96b9 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -17,10 +17,10 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_SA1111 -void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); +void sa1111_adjust_zones(unsigned long *size, unsigned long *holes); -#define arch_adjust_zones(node, size, holes) \ - sa1111_adjust_zones(node, size, holes) +#define arch_adjust_zones(size, holes) \ + sa1111_adjust_zones(size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_1M) diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h index 3053e5b7f168..d9c4812f1c31 100644 --- a/arch/arm/mach-shark/include/mach/memory.h +++ b/arch/arm/mach-shark/include/mach/memory.h @@ -19,9 +19,8 @@ #ifndef __ASSEMBLY__ -static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) +static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size) { - if (node != 0) return; /* Only the first 4 MB (=1024 Pages) are usable for DMA */ /* See dev / -> .properties in OpenFirmware. */ zone_size[1] = zone_size[0] - 1024; @@ -30,8 +29,8 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig zhole_size[0] = 0; } -#define arch_adjust_zones(node, size, holes) \ - __arch_adjust_zones(node, size, holes) +#define arch_adjust_zones(size, holes) \ + __arch_adjust_zones(size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_4M) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index f2b88c5fe142..4c704b4e8b34 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -70,6 +70,18 @@ endmenu menu "Timer and clock configuration" +config SHMOBILE_TIMER_HZ + int "Kernel HZ (jiffies per second)" + range 32 1024 + default "128" + help + Allows the configuration of the timer frequency. It is customary + to have the timer interrupt run at 1000 Hz or 100 Hz, but in the + case of low timer frequencies other values may be more suitable. + SH-Mobile systems using a 32768 Hz RCLK for clock events may want + to select a HZ value such as 128 that can evenly divide RCLK. + A HZ value that does not divide evenly may cause timer drift. + config SH_TIMER_CMT bool "CMT timer driver" default y diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index 5179b72e1ee3..132256bb8c81 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -2,7 +2,6 @@ #define __ASM_MACH_IRQS_H #define NR_IRQS 512 -#define NR_IRQS_LEGACY 8 #define evt2irq(evt) (((evt) >> 5) - 16) #define irq2evt(irq) (((irq) + 16) << 5) diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 39f6ccf22294..18febf92f20a 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -341,8 +341,11 @@ static struct clk gpio_clk = { .recalc = &follow_parent, }; +static struct clk dummy_apb_pclk; + /* array of all spear 3xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { + { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, /* root clks */ { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index 13e27c769685..36ff056b7321 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -428,8 +428,11 @@ static struct clk gpio2_clk = { .recalc = &follow_parent, }; +static struct clk dummy_apb_pclk; + /* array of all spear 6xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { + { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, /* root clks */ { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5af71d5ba665..5d12d547789e 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -1212,6 +1212,8 @@ static struct clk ppm_clk = { }; #endif +static struct clk dummy_apb_pclk; + #define DEF_LOOKUP(devid, clkref) \ { \ .dev_id = devid, \ @@ -1223,6 +1225,10 @@ static struct clk ppm_clk = { * look up through clockdevice. */ static struct clk_lookup lookups[] = { + { + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, /* Connected directly to the AMBA bus */ DEF_LOOKUP("amba", &amba_clk), DEF_LOOKUP("cpu", &cpu_clk), diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h index ab000df7fc03..bf134bcc129d 100644 --- a/arch/arm/mach-u300/include/mach/memory.h +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -35,14 +35,6 @@ #endif /* - * TCM memory whereabouts - */ -#define ITCM_OFFSET 0xffff2000 -#define ITCM_END 0xffff3fff -#define DTCM_OFFSET 0xffff4000 -#define DTCM_END 0xffff5fff - -/* * We enable a real big DMA buffer if need be. */ #define CONSISTENT_DMA_SIZE SZ_4M diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index d2a0b8847a18..bfcda9820888 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -14,6 +14,7 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/ioport.h> +#include <linux/memblock.h> #include <linux/platform_device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -22,6 +23,21 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +static void __init u300_reserve(void) +{ + /* + * U300 - This platform family can share physical memory + * between two ARM cpus, one running Linux and the other + * running another OS. + */ +#ifdef CONFIG_MACH_U300_SINGLE_RAM +#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \ + CONFIG_MACH_U300_2MB_ALIGNMENT_FIX + memblock_reserve(PHYS_OFFSET, 0x00100000); +#endif +#endif +} + static void __init u300_init_machine(void) { u300_init_devices(); @@ -49,6 +65,7 @@ MACHINE_START(U300, MACH_U300_STRING) .io_pg_offst = ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc, .boot_params = BOOT_PARAMS_OFFSET, .map_io = u300_map_io, + .reserve = u300_reserve, .init_irq = u300_init_irq, .timer = &u300_timer, .init_machine = u300_init_machine, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb8d7b771817..0e8fd135a57d 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -13,19 +13,42 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> #include <linux/spi/spi.h> +#include <linux/mfd/ab8500.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <plat/pincfg.h> #include <plat/i2c.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> +#include "pins-db8500.h" + +static pin_cfg_t mop500_pins[] = { + /* SSP0 */ + GPIO143_SSP0_CLK, + GPIO144_SSP0_FRM, + GPIO145_SSP0_RXD, + GPIO146_SSP0_TXD, + + /* I2C */ + GPIO147_I2C0_SCL, + GPIO148_I2C0_SDA, + GPIO16_I2C1_SCL, + GPIO17_I2C1_SDA, + GPIO10_I2C2_SDA, + GPIO11_I2C2_SCL, + GPIO229_I2C3_SDA, + GPIO230_I2C3_SCL, +}; + static void ab4500_spi_cs_control(u32 command) { /* set the FRM signal, which is CS - TODO */ @@ -48,15 +71,20 @@ struct pl022_config_chip ab4500_chip_info = { .cs_control = ab4500_spi_cs_control, }; +static struct ab8500_platform_data ab8500_platdata = { + .irq_base = MOP500_AB8500_IRQ_BASE, +}; + static struct spi_board_info u8500_spi_devices[] = { { .modalias = "ab8500", .controller_data = &ab4500_chip_info, + .platform_data = &ab8500_platdata, .max_speed_hz = 12000000, .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, - .irq = IRQ_AB4500, + .irq = IRQ_DB8500_AB8500, }, }; @@ -118,6 +146,10 @@ static void __init u8500_init_machine(void) { int i; + u8500_init_devices(); + + nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins)); + u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data; ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data; ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data; @@ -133,8 +165,6 @@ static void __init u8500_init_machine(void) spi_register_board_info(u8500_spi_devices, ARRAY_SIZE(u8500_spi_devices)); - - u8500_init_devices(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 0a1318fc8e2b..d8ab7f184fe4 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -453,7 +453,11 @@ static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0); static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); +static struct clk clk_dummy_apb_pclk; + static struct clk_lookup u8500_common_clks[] = { + CLK(dummy_apb_pclk, NULL, "apb_pclk"), + /* Peripheral Cluster #1 */ CLK(gpio0, "gpio.0", NULL), CLK(gpio0, "gpio.1", NULL), diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 822903421943..654fca944e65 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -65,7 +65,7 @@ struct amba_device u8500_ssp0_device = { .end = U8500_SSP0_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_SSP0, NO_IRQ }, + .irq = {IRQ_DB8500_SSP0, NO_IRQ }, /* ST-Ericsson modified id */ .periphid = SSP_PER_ID, }; @@ -77,8 +77,8 @@ static struct resource u8500_i2c0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_I2C0, - .end = IRQ_I2C0, + .start = IRQ_DB8500_I2C0, + .end = IRQ_DB8500_I2C0, .flags = IORESOURCE_IRQ, } }; @@ -97,8 +97,8 @@ static struct resource u8500_i2c4_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_I2C4, - .end = IRQ_I2C4, + .start = IRQ_DB8500_I2C4, + .end = IRQ_DB8500_I2C4, .flags = IORESOURCE_IRQ, } }; @@ -130,8 +130,8 @@ static struct resource dma40_resources[] = { .name = "lcla", }, [3] = { - .start = IRQ_DMA, - .end = IRQ_DMA, + .start = IRQ_DB8500_DMA, + .end = IRQ_DB8500_DMA, .flags = IORESOURCE_IRQ} }; diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h new file mode 100644 index 000000000000..cca4f705601e --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_BOARD_MOP500_H +#define __MACH_IRQS_BOARD_MOP500_H + +#define AB8500_NR_IRQS 104 + +#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START +#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ + + AB8500_NR_IRQS) +#define MOP500_IRQ_END MOP500_AB8500_IRQ_END + +#if MOP500_IRQ_END > IRQ_BOARD_END +#undef IRQ_BOARD_END +#define IRQ_BOARD_END MOP500_IRQ_END +#endif + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h new file mode 100644 index 000000000000..6fbfe5e2065a --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_DB5500_H +#define __MACH_IRQS_DB5500_H + +#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4) +#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6) +#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7) +#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8) +#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9) +#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10) +#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11) +#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12) +#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13) +#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14) +#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15) +#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16) +#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17) +#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18) +#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19) +#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20) +#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21) +#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22) +#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23) +#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24) +#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25) +#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26) +#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27) +#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28) +#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29) +#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30) +#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31) +#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33) +#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34) +#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35) +#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36) +#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37) +#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38) +#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39) +#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40) +#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41) +#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42) +#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43) +#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44) +#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45) +#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46) +#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47) +#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48) +#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50) +#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52) +#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53) +#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55) +#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56) +#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57) +#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59) +#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) +#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) +#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) +#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) +#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) +#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) +#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108) +#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109) +#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110) +#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112) +#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113) +#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114) +#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115) +#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116) +#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118) +#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119) +#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120) +#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121) +#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122) +#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123) +#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124) +#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) +#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h new file mode 100644 index 000000000000..8b5d9f0a1633 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h @@ -0,0 +1,96 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_DB8500_H +#define __MACH_IRQS_DB8500_H + +#define IRQ_DB8500_MTU0 (IRQ_SHPI_START + 4) +#define IRQ_DB8500_SPI2 (IRQ_SHPI_START + 6) +#define IRQ_DB8500_PMU (IRQ_SHPI_START + 7) +#define IRQ_DB8500_SPI0 (IRQ_SHPI_START + 8) +#define IRQ_DB8500_RTT (IRQ_SHPI_START + 9) +#define IRQ_DB8500_PKA (IRQ_SHPI_START + 10) +#define IRQ_DB8500_UART0 (IRQ_SHPI_START + 11) +#define IRQ_DB8500_I2C3 (IRQ_SHPI_START + 12) +#define IRQ_DB8500_L2CC (IRQ_SHPI_START + 13) +#define IRQ_DB8500_SSP0 (IRQ_SHPI_START + 14) +#define IRQ_DB8500_CRYP1 (IRQ_SHPI_START + 15) +#define IRQ_DB8500_MSP1_RX (IRQ_SHPI_START + 16) +#define IRQ_DB8500_MTU1 (IRQ_SHPI_START + 17) +#define IRQ_DB8500_RTC (IRQ_SHPI_START + 18) +#define IRQ_DB8500_UART1 (IRQ_SHPI_START + 19) +#define IRQ_DB8500_USB_WAKEUP (IRQ_SHPI_START + 20) +#define IRQ_DB8500_I2C0 (IRQ_SHPI_START + 21) +#define IRQ_DB8500_I2C1 (IRQ_SHPI_START + 22) +#define IRQ_DB8500_USBOTG (IRQ_SHPI_START + 23) +#define IRQ_DB8500_DMA_SECURE (IRQ_SHPI_START + 24) +#define IRQ_DB8500_DMA (IRQ_SHPI_START + 25) +#define IRQ_DB8500_UART2 (IRQ_SHPI_START + 26) +#define IRQ_DB8500_ICN_PMU1 (IRQ_SHPI_START + 27) +#define IRQ_DB8500_ICN_PMU2 (IRQ_SHPI_START + 28) +#define IRQ_DB8500_HSIR_EXCEP (IRQ_SHPI_START + 29) +#define IRQ_DB8500_MSP0 (IRQ_SHPI_START + 31) +#define IRQ_DB8500_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) +#define IRQ_DB8500_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) +#define IRQ_DB8500_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) +#define IRQ_DB8500_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) +#define IRQ_DB8500_HSIR_CH4_OVRRUN (IRQ_SHPI_START + 36) +#define IRQ_DB8500_HSIR_CH5_OVRRUN (IRQ_SHPI_START + 37) +#define IRQ_DB8500_HSIR_CH6_OVRRUN (IRQ_SHPI_START + 38) +#define IRQ_DB8500_HSIR_CH7_OVRRUN (IRQ_SHPI_START + 39) +#define IRQ_DB8500_AB8500 (IRQ_SHPI_START + 40) +#define IRQ_DB8500_SDMMC2 (IRQ_SHPI_START + 41) +#define IRQ_DB8500_SIA (IRQ_SHPI_START + 42) +#define IRQ_DB8500_SIA2 (IRQ_SHPI_START + 43) +#define IRQ_DB8500_SVA (IRQ_SHPI_START + 44) +#define IRQ_DB8500_SVA2 (IRQ_SHPI_START + 45) +#define IRQ_DB8500_PRCMU0 (IRQ_SHPI_START + 46) +#define IRQ_DB8500_PRCMU1 (IRQ_SHPI_START + 47) +#define IRQ_DB8500_DISP (IRQ_SHPI_START + 48) +#define IRQ_DB8500_SPI3 (IRQ_SHPI_START + 49) +#define IRQ_DB8500_SDMMC1 (IRQ_SHPI_START + 50) +#define IRQ_DB8500_I2C4 (IRQ_SHPI_START + 51) +#define IRQ_DB8500_SSP1 (IRQ_SHPI_START + 52) +#define IRQ_DB8500_SKE (IRQ_SHPI_START + 53) +#define IRQ_DB8500_KB (IRQ_SHPI_START + 54) +#define IRQ_DB8500_I2C2 (IRQ_SHPI_START + 55) +#define IRQ_DB8500_B2R2 (IRQ_SHPI_START + 56) +#define IRQ_DB8500_CRYP0 (IRQ_SHPI_START + 57) +#define IRQ_DB8500_SDMMC3 (IRQ_SHPI_START + 59) +#define IRQ_DB8500_SDMMC0 (IRQ_SHPI_START + 60) +#define IRQ_DB8500_HSEM (IRQ_SHPI_START + 61) +#define IRQ_DB8500_MSP1 (IRQ_SHPI_START + 62) +#define IRQ_DB8500_SBAG (IRQ_SHPI_START + 63) +#define IRQ_DB8500_SPI1 (IRQ_SHPI_START + 96) +#define IRQ_DB8500_SRPTIMER (IRQ_SHPI_START + 97) +#define IRQ_DB8500_MSP2 (IRQ_SHPI_START + 98) +#define IRQ_DB8500_SDMMC4 (IRQ_SHPI_START + 99) +#define IRQ_DB8500_SDMMC5 (IRQ_SHPI_START + 100) +#define IRQ_DB8500_HSIRD0 (IRQ_SHPI_START + 104) +#define IRQ_DB8500_HSIRD1 (IRQ_SHPI_START + 105) +#define IRQ_DB8500_HSITD0 (IRQ_SHPI_START + 106) +#define IRQ_DB8500_HSITD1 (IRQ_SHPI_START + 107) +#define IRQ_DB8500_CTI0 (IRQ_SHPI_START + 108) +#define IRQ_DB8500_CTI1 (IRQ_SHPI_START + 109) +#define IRQ_DB8500_ICN_ERR (IRQ_SHPI_START + 110) +#define IRQ_DB8500_MALI_PPMMU (IRQ_SHPI_START + 112) +#define IRQ_DB8500_MALI_PP (IRQ_SHPI_START + 113) +#define IRQ_DB8500_MALI_GPMMU (IRQ_SHPI_START + 114) +#define IRQ_DB8500_MALI_GP (IRQ_SHPI_START + 115) +#define IRQ_DB8500_MALI (IRQ_SHPI_START + 116) +#define IRQ_DB8500_PRCMU_SEM (IRQ_SHPI_START + 118) +#define IRQ_DB8500_GPIO0 (IRQ_SHPI_START + 119) +#define IRQ_DB8500_GPIO1 (IRQ_SHPI_START + 120) +#define IRQ_DB8500_GPIO2 (IRQ_SHPI_START + 121) +#define IRQ_DB8500_GPIO3 (IRQ_SHPI_START + 122) +#define IRQ_DB8500_GPIO4 (IRQ_SHPI_START + 123) +#define IRQ_DB8500_GPIO5 (IRQ_SHPI_START + 124) +#define IRQ_DB8500_GPIO6 (IRQ_SHPI_START + 125) +#define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126) +#define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 7970684b1d09..10385bdc2b77 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -10,7 +10,8 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include <mach/hardware.h> +#include <mach/irqs-db5500.h> +#include <mach/irqs-db8500.h> #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 @@ -67,12 +68,21 @@ /* There are 128 shared peripheral interrupts assigned to * INTID[160:32]. The first 32 interrupts are reserved. */ -#define U8500_SOC_NR_IRQS 161 +#define DBX500_NR_INTERNAL_IRQS 161 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS) -#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS) +#define IRQ_BOARD_START NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) -#endif /*ASM_ARCH_IRQS_H*/ +/* This will be overridden by board-specific irq headers */ +#define IRQ_BOARD_END IRQ_BOARD_START + +#ifdef CONFIG_MACH_U8500_MOP +#include <mach/irqs-board-mop500.h> +#endif + +#define NR_IRQS IRQ_BOARD_END + +#endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h new file mode 100644 index 000000000000..9055d5d3233c --- /dev/null +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -0,0 +1,742 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + */ + +#ifndef __MACH_PINS_DB8500_H +#define __MACH_PINS_DB8500_H + +/* + * TODO: Eventually encode all non-board specific pull up/down configuration + * here. + */ + +#define GPIO0_GPIO PIN_CFG(0, GPIO) +#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A) +#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B) +#define GPIO0_IP_TDO PIN_CFG(0, ALT_C) + +#define GPIO1_GPIO PIN_CFG(1, GPIO) +#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A) +#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B) +#define GPIO1_IP_TDI PIN_CFG(1, ALT_C) + +#define GPIO2_GPIO PIN_CFG(2, GPIO) +#define GPIO2_U0_RXD PIN_CFG(2, ALT_A) +#define GPIO2_NONE PIN_CFG(2, ALT_B) +#define GPIO2_IP_TMS PIN_CFG(2, ALT_C) + +#define GPIO3_GPIO PIN_CFG(3, GPIO) +#define GPIO3_U0_TXD PIN_CFG(3, ALT_A) +#define GPIO3_NONE PIN_CFG(3, ALT_B) +#define GPIO3_IP_TCK PIN_CFG(3, ALT_C) + +#define GPIO4_GPIO PIN_CFG(4, GPIO) +#define GPIO4_U1_RXD PIN_CFG(4, ALT_A) +#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) +#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) + +#define GPIO5_GPIO PIN_CFG(5, GPIO) +#define GPIO5_U1_TXD PIN_CFG(5, ALT_A) +#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) +#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) + +#define GPIO6_GPIO PIN_CFG(6, GPIO) +#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) +#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) +#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) + +#define GPIO7_GPIO PIN_CFG(7, GPIO) +#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) +#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) +#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) + +#define GPIO8_GPIO PIN_CFG(8, GPIO) +#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) +#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) + +#define GPIO9_GPIO PIN_CFG(9, GPIO) +#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) +#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) + +#define GPIO10_GPIO PIN_CFG(10, GPIO) +#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) +#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) +#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) + +#define GPIO11_GPIO PIN_CFG(11, GPIO) +#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) +#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) +#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) + +#define GPIO12_GPIO PIN_CFG(12, GPIO) +#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A) +#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B) + +#define GPIO13_GPIO PIN_CFG(13, GPIO) +#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A) + +#define GPIO14_GPIO PIN_CFG(14, GPIO) +#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A) + +#define GPIO15_GPIO PIN_CFG(15, GPIO) +#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A) +#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B) + +#define GPIO16_GPIO PIN_CFG(16, GPIO) +#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) +#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) +#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) + +#define GPIO17_GPIO PIN_CFG(17, GPIO) +#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) +#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) +#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) + +#define GPIO18_GPIO PIN_CFG(18, GPIO) +#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) +#define GPIO18_U2_RXD PIN_CFG(18, ALT_B) +#define GPIO18_MS_IEP PIN_CFG(18, ALT_C) + +#define GPIO19_GPIO PIN_CFG(19, GPIO) +#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) +#define GPIO19_U2_TXD PIN_CFG(19, ALT_B) +#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) + +#define GPIO20_GPIO PIN_CFG(20, GPIO) +#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) +#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) +#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) + +#define GPIO21_GPIO PIN_CFG(21, GPIO) +#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) +#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) +#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) + +#define GPIO22_GPIO PIN_CFG(22, GPIO) +#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) +#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) +#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) + +#define GPIO23_GPIO PIN_CFG(23, GPIO) +#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) +#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) +#define GPIO23_MS_CLK PIN_CFG(23, ALT_C) + +#define GPIO24_GPIO PIN_CFG(24, GPIO) +#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) +#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) +#define GPIO24_MS_BS PIN_CFG(24, ALT_C) + +#define GPIO25_GPIO PIN_CFG(25, GPIO) +#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) +#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) +#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) + +#define GPIO26_GPIO PIN_CFG(26, GPIO) +#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) +#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) +#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) + +#define GPIO27_GPIO PIN_CFG(27, GPIO) +#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) +#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) +#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) + +#define GPIO28_GPIO PIN_CFG(28, GPIO) +#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) +#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) +#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) + +#define GPIO29_GPIO PIN_CFG(29, GPIO) +#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A) +#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B) +#define GPIO29_U2_RXD PIN_CFG(29, ALT_C) + +#define GPIO30_GPIO PIN_CFG(30, GPIO) +#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) +#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B) +#define GPIO30_U2_TXD PIN_CFG(30, ALT_C) + +#define GPIO31_GPIO PIN_CFG(31, GPIO) +#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A) +#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B) +#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C) + +#define GPIO32_GPIO PIN_CFG(32, GPIO) +#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A) +#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B) +#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C) + +#define GPIO33_GPIO PIN_CFG(33, GPIO) +#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A) +#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B) +#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C) + +#define GPIO34_GPIO PIN_CFG(34, GPIO) +#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A) +#define GPIO34_NONE PIN_CFG(34, ALT_B) +#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C) + +#define GPIO35_GPIO PIN_CFG(35, GPIO) +#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A) +#define GPIO35_NONE PIN_CFG(35, ALT_B) +#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C) + +#define GPIO36_GPIO PIN_CFG(36, GPIO) +#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A) +#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B) +#define GPIO36_U0_RIn PIN_CFG(36, ALT_C) + +#define GPIO64_GPIO PIN_CFG(64, GPIO) +#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A) +#define GPIO64_KP_O1 PIN_CFG(64, ALT_B) +#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C) + +#define GPIO65_GPIO PIN_CFG(65, GPIO) +#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A) +#define GPIO65_KP_O0 PIN_CFG(65, ALT_B) +#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C) + +#define GPIO66_GPIO PIN_CFG(66, GPIO) +#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A) +#define GPIO66_KP_I1 PIN_CFG(66, ALT_B) +#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C) + +#define GPIO67_GPIO PIN_CFG(67, GPIO) +#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A) +#define GPIO67_KP_I0 PIN_CFG(67, ALT_B) +#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C) + +#define GPIO68_GPIO PIN_CFG(68, GPIO) +#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A) +#define GPIO68_KP_O7 PIN_CFG(68, ALT_B) +#define GPIO68_SM_CLE PIN_CFG(68, ALT_C) + +#define GPIO69_GPIO PIN_CFG(69, GPIO) +#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A) +#define GPIO69_KP_I7 PIN_CFG(69, ALT_B) +#define GPIO69_SM_ALE PIN_CFG(69, ALT_C) + +#define GPIO70_GPIO PIN_CFG(70, GPIO) +#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A) +#define GPIO70_KP_O5 PIN_CFG(70, ALT_B) +#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C) + +#define GPIO71_GPIO PIN_CFG(71, GPIO) +#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A) +#define GPIO71_KP_O4 PIN_CFG(71, ALT_B) +#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C) + +#define GPIO72_GPIO PIN_CFG(72, GPIO) +#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A) +#define GPIO72_KP_O3 PIN_CFG(72, ALT_B) +#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C) + +#define GPIO73_GPIO PIN_CFG(73, GPIO) +#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A) +#define GPIO73_KP_O2 PIN_CFG(73, ALT_B) +#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C) + +#define GPIO74_GPIO PIN_CFG(74, GPIO) +#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A) +#define GPIO74_KP_I5 PIN_CFG(74, ALT_B) +#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C) + +#define GPIO75_GPIO PIN_CFG(75, GPIO) +#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A) +#define GPIO75_KP_I4 PIN_CFG(75, ALT_B) +#define GPIO75_U2_RXD PIN_CFG(75, ALT_C) + +#define GPIO76_GPIO PIN_CFG(76, GPIO) +#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A) +#define GPIO76_KP_I3 PIN_CFG(76, ALT_B) +#define GPIO76_U2_TXD PIN_CFG(76, ALT_C) + +#define GPIO77_GPIO PIN_CFG(77, GPIO) +#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A) +#define GPIO77_KP_I2 PIN_CFG(77, ALT_B) +#define GPIO77_NONE PIN_CFG(77, ALT_C) + +#define GPIO78_GPIO PIN_CFG(78, GPIO) +#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A) +#define GPIO78_KP_O6 PIN_CFG(78, ALT_B) +#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C) + +#define GPIO79_GPIO PIN_CFG(79, GPIO) +#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A) +#define GPIO79_KP_I6 PIN_CFG(79, ALT_B) +#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C) + +#define GPIO80_GPIO PIN_CFG(80, GPIO) +#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A) +#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B) +#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C) + +#define GPIO81_GPIO PIN_CFG(81, GPIO) +#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A) +#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B) +#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C) + +#define GPIO82_GPIO PIN_CFG(82, GPIO) +#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A) +#define GPIO82_KP_O5 PIN_CFG(82, ALT_B) + +#define GPIO83_GPIO PIN_CFG(83, GPIO) +#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A) +#define GPIO83_KP_O4 PIN_CFG(83, ALT_B) + +#define GPIO84_GPIO PIN_CFG(84, GPIO) +#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A) +#define GPIO84_KP_I5 PIN_CFG(84, ALT_B) + +#define GPIO85_GPIO PIN_CFG(85, GPIO) +#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A) +#define GPIO85_KP_I4 PIN_CFG(85, ALT_B) + +#define GPIO86_GPIO PIN_CFG(86, GPIO) +#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A) +#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B) +#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C) + +#define GPIO87_GPIO PIN_CFG(87, GPIO) +#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A) +#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B) +#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C) + +#define GPIO88_GPIO PIN_CFG(88, GPIO) +#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A) +#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B) +#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C) + +#define GPIO89_GPIO PIN_CFG(89, GPIO) +#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A) +#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B) +#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C) + +#define GPIO90_GPIO PIN_CFG(90, GPIO) +#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A) +#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B) +#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C) + +#define GPIO91_GPIO PIN_CFG(91, GPIO) +#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A) +#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B) +#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C) + +#define GPIO92_GPIO PIN_CFG(92, GPIO) +#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A) +#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B) +#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C) + +#define GPIO93_GPIO PIN_CFG(93, GPIO) +#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A) +#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B) +#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C) + +#define GPIO94_GPIO PIN_CFG(94, GPIO) +#define GPIO94_KP_O7 PIN_CFG(94, ALT_A) +#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B) +#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C) + +#define GPIO95_GPIO PIN_CFG(95, GPIO) +#define GPIO95_KP_I7 PIN_CFG(95, ALT_A) +#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B) +#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C) + +#define GPIO96_GPIO PIN_CFG(96, GPIO) +#define GPIO96_KP_O6 PIN_CFG(96, ALT_A) +#define GPIO96_SM_OEn PIN_CFG(96, ALT_B) +#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C) + +#define GPIO97_GPIO PIN_CFG(97, GPIO) +#define GPIO97_KP_I6 PIN_CFG(97, ALT_A) +#define GPIO97_SM_WEn PIN_CFG(97, ALT_B) +#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) + +#define GPIO128_GPIO PIN_CFG(128, GPIO) +#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) +#define GPIO128_SM_CKO PIN_CFG(128, ALT_B) + +#define GPIO129_GPIO PIN_CFG(129, GPIO) +#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) +#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) + +#define GPIO130_GPIO PIN_CFG(130, GPIO) +#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) +#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) +#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) + +#define GPIO131_GPIO PIN_CFG(131, GPIO) +#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) +#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) + +#define GPIO132_GPIO PIN_CFG(132, GPIO) +#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) +#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) + +#define GPIO133_GPIO PIN_CFG(133, GPIO) +#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) +#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) + +#define GPIO134_GPIO PIN_CFG(134, GPIO) +#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) +#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) + +#define GPIO135_GPIO PIN_CFG(135, GPIO) +#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) +#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) + +#define GPIO136_GPIO PIN_CFG(136, GPIO) +#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) +#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) + +#define GPIO137_GPIO PIN_CFG(137, GPIO) +#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) +#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) + +#define GPIO138_GPIO PIN_CFG(138, GPIO) +#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) +#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) + +#define GPIO139_GPIO PIN_CFG(139, GPIO) +#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A) +#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B) +#define GPIO139_KP_O8 PIN_CFG(139, ALT_C) + +#define GPIO140_GPIO PIN_CFG(140, GPIO) +#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A) +#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B) +#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C) + +#define GPIO141_GPIO PIN_CFG(141, GPIO) +#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A) +#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B) +#define GPIO141_KP_O9 PIN_CFG(141, ALT_C) + +#define GPIO142_GPIO PIN_CFG(142, GPIO) +#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A) +#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B) +#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C) + +#define GPIO143_GPIO PIN_CFG(143, GPIO) +#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A) + +#define GPIO144_GPIO PIN_CFG(144, GPIO) +#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A) + +#define GPIO145_GPIO PIN_CFG(145, GPIO) +#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A) + +#define GPIO146_GPIO PIN_CFG(146, GPIO) +#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) + +#define GPIO147_GPIO PIN_CFG(147, GPIO) +#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) + +#define GPIO148_GPIO PIN_CFG(148, GPIO) +#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) + +#define GPIO149_GPIO PIN_CFG(149, GPIO) +#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) +#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B) +#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C) + +#define GPIO150_GPIO PIN_CFG(150, GPIO) +#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A) +#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B) + +#define GPIO151_GPIO PIN_CFG(151, GPIO) +#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A) +#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B) +#define GPIO151_KP_O8 PIN_CFG(151, ALT_C) + +#define GPIO152_GPIO PIN_CFG(152, GPIO) +#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A) +#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B) +#define GPIO152_KP_O9 PIN_CFG(152, ALT_C) + +#define GPIO153_GPIO PIN_CFG(153, GPIO) +#define GPIO153_KP_I7 PIN_CFG(153, ALT_A) +#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) +#define GPIO153_U2_RXD PIN_CFG(153, ALT_C) + +#define GPIO154_GPIO PIN_CFG(154, GPIO) +#define GPIO154_KP_I6 PIN_CFG(154, ALT_A) +#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) +#define GPIO154_U2_TXD PIN_CFG(154, ALT_C) + +#define GPIO155_GPIO PIN_CFG(155, GPIO) +#define GPIO155_KP_I5 PIN_CFG(155, ALT_A) +#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) +#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) + +#define GPIO156_GPIO PIN_CFG(156, GPIO) +#define GPIO156_KP_I4 PIN_CFG(156, ALT_A) +#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) +#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) + +#define GPIO157_GPIO PIN_CFG(157, GPIO) +#define GPIO157_KP_O7 PIN_CFG(157, ALT_A) +#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) +#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) + +#define GPIO158_GPIO PIN_CFG(158, GPIO) +#define GPIO158_KP_O6 PIN_CFG(158, ALT_A) +#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) +#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) + +#define GPIO159_GPIO PIN_CFG(159, GPIO) +#define GPIO159_KP_O5 PIN_CFG(159, ALT_A) +#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) +#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) + +#define GPIO160_GPIO PIN_CFG(160, GPIO) +#define GPIO160_KP_O4 PIN_CFG(160, ALT_A) +#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) +#define GPIO160_NONE PIN_CFG(160, ALT_C) + +#define GPIO161_GPIO PIN_CFG(161, GPIO) +#define GPIO161_KP_I3 PIN_CFG(161, ALT_A) +#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) +#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) + +#define GPIO162_GPIO PIN_CFG(162, GPIO) +#define GPIO162_KP_I2 PIN_CFG(162, ALT_A) +#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) +#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) + +#define GPIO163_GPIO PIN_CFG(163, GPIO) +#define GPIO163_KP_I1 PIN_CFG(163, ALT_A) +#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) +#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) + +#define GPIO164_GPIO PIN_CFG(164, GPIO) +#define GPIO164_KP_I0 PIN_CFG(164, ALT_A) +#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) +#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) + +#define GPIO165_GPIO PIN_CFG(165, GPIO) +#define GPIO165_KP_O3 PIN_CFG(165, ALT_A) +#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) +#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) + +#define GPIO166_GPIO PIN_CFG(166, GPIO) +#define GPIO166_KP_O2 PIN_CFG(166, ALT_A) +#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) +#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) + +#define GPIO167_GPIO PIN_CFG(167, GPIO) +#define GPIO167_KP_O1 PIN_CFG(167, ALT_A) +#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) +#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) + +#define GPIO168_GPIO PIN_CFG(168, GPIO) +#define GPIO168_KP_O0 PIN_CFG(168, ALT_A) +#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) +#define GPIO168_NONE PIN_CFG(168, ALT_C) + +#define GPIO169_GPIO PIN_CFG(169, GPIO) +#define GPIO169_RF_PURn PIN_CFG(169, ALT_A) +#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B) +#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C) + +#define GPIO170_GPIO PIN_CFG(170, GPIO) +#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A) +#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B) +#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C) + +#define GPIO171_GPIO PIN_CFG(171, GPIO) +#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A) +#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B) +#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C) + +#define GPIO192_GPIO PIN_CFG(192, GPIO) +#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A) + +#define GPIO193_GPIO PIN_CFG(193, GPIO) +#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A) + +#define GPIO194_GPIO PIN_CFG(194, GPIO) +#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A) + +#define GPIO195_GPIO PIN_CFG(195, GPIO) +#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A) + +#define GPIO196_GPIO PIN_CFG(196, GPIO) +#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) + +#define GPIO197_GPIO PIN_CFG(197, GPIO) +#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) + +#define GPIO198_GPIO PIN_CFG(198, GPIO) +#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) + +#define GPIO199_GPIO PIN_CFG(199, GPIO) +#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) + +#define GPIO200_GPIO PIN_CFG(200, GPIO) +#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) + +#define GPIO201_GPIO PIN_CFG(201, GPIO) +#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) + +#define GPIO202_GPIO PIN_CFG(202, GPIO) +#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) +#define GPIO202_PWL PIN_CFG(202, ALT_B) +#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) + +#define GPIO203_GPIO PIN_CFG(203, GPIO) +#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) + +#define GPIO204_GPIO PIN_CFG(204, GPIO) +#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) + +#define GPIO205_GPIO PIN_CFG(205, GPIO) +#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) + +#define GPIO206_GPIO PIN_CFG(206, GPIO) +#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) + +#define GPIO207_GPIO PIN_CFG(207, GPIO) +#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) + +#define GPIO208_GPIO PIN_CFG(208, GPIO) +#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) + +#define GPIO209_GPIO PIN_CFG(209, GPIO) +#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A) +#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B) + +#define GPIO210_GPIO PIN_CFG(210, GPIO) +#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A) + +#define GPIO211_GPIO PIN_CFG(211, GPIO) +#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A) + +#define GPIO212_GPIO PIN_CFG(212, GPIO) +#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A) +#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B) + +#define GPIO213_GPIO PIN_CFG(213, GPIO) +#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A) +#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B) + +#define GPIO214_GPIO PIN_CFG(214, GPIO) +#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A) +#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B) + +#define GPIO215_GPIO PIN_CFG(215, GPIO) +#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) +#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) +#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) + +#define GPIO216_GPIO PIN_CFG(216, GPIO) +#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) +#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) +#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) + +#define GPIO217_GPIO PIN_CFG(217, GPIO) +#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) +#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) +#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) + +#define GPIO218_GPIO PIN_CFG(218, GPIO) +#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) +#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) +#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) + +#define GPIO219_GPIO PIN_CFG(219, GPIO) +#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) +#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B) + +#define GPIO220_GPIO PIN_CFG(220, GPIO) +#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A) +#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B) +#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C) + +#define GPIO221_GPIO PIN_CFG(221, GPIO) +#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A) +#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B) + +#define GPIO222_GPIO PIN_CFG(222, GPIO) +#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A) +#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B) + +#define GPIO223_GPIO PIN_CFG(223, GPIO) +#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A) +#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B) +#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C) + +#define GPIO224_GPIO PIN_CFG(224, GPIO) +#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A) +#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B) +#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C) + +#define GPIO225_GPIO PIN_CFG(225, GPIO) +#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A) +#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B) +#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C) + +#define GPIO226_GPIO PIN_CFG(226, GPIO) +#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A) +#define GPIO226_PWL PIN_CFG(226, ALT_B) +#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C) + +#define GPIO227_GPIO PIN_CFG(227, GPIO) +#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A) + +#define GPIO228_GPIO PIN_CFG(228, GPIO) +#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A) + +#define GPIO229_GPIO PIN_CFG(229, GPIO) +#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) +#define GPIO229_PWL PIN_CFG(229, ALT_B) +#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) + +#define GPIO230_GPIO PIN_CFG(230, GPIO) +#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) +#define GPIO230_PWL PIN_CFG(230, ALT_B) +#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) + +#define GPIO256_GPIO PIN_CFG(256, GPIO) +#define GPIO256_USB_NXT PIN_CFG(256, ALT_A) + +#define GPIO257_GPIO PIN_CFG(257, GPIO) +#define GPIO257_USB_STP PIN_CFG(257, ALT_A) + +#define GPIO258_GPIO PIN_CFG(258, GPIO) +#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A) +#define GPIO258_NONE PIN_CFG(258, ALT_B) +#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C) + +#define GPIO259_GPIO PIN_CFG(259, GPIO) +#define GPIO259_USB_DIR PIN_CFG(259, ALT_A) + +#define GPIO260_GPIO PIN_CFG(260, GPIO) +#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A) + +#define GPIO261_GPIO PIN_CFG(261, GPIO) +#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A) + +#define GPIO262_GPIO PIN_CFG(262, GPIO) +#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A) + +#define GPIO263_GPIO PIN_CFG(263, GPIO) +#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A) + +#define GPIO264_GPIO PIN_CFG(264, GPIO) +#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A) + +#define GPIO265_GPIO PIN_CFG(265, GPIO) +#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A) + +#define GPIO266_GPIO PIN_CFG(266, GPIO) +#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A) + +#define GPIO267_GPIO PIN_CFG(267, GPIO) +#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A) + +#endif diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 3dff8641b03f..e38acb0f89c8 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,6 +28,7 @@ #include <linux/amba/clcd.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <linux/gfp.h> @@ -354,6 +355,21 @@ static struct mmci_platform_data mmc0_plat_data = { .gpio_cd = -1, }; +static struct resource char_lcd_resources[] = { + { + .start = VERSATILE_CHAR_LCD_BASE, + .end = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device char_lcd_device = { + .name = "arm-charlcd", + .id = -1, + .num_resources = ARRAY_SIZE(char_lcd_resources), + .resource = char_lcd_resources, +}; + /* * Clock handling */ @@ -400,8 +416,13 @@ static struct clk ref24_clk = { .rate = 24000000, }; +static struct clk dummy_apb_pclk; + static struct clk_lookup lookups[] = { - { /* UART0 */ + { /* AMBA bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ .dev_id = "dev:f1", .clk = &ref24_clk, }, { /* UART1 */ @@ -425,6 +446,9 @@ static struct clk_lookup lookups[] = { }, { /* MMC1 */ .dev_id = "fpga:0b", .clk = &ref24_clk, + }, { /* SSP */ + .dev_id = "dev:f4", + .clk = &ref24_clk, }, { /* CLCD */ .dev_id = "dev:20", .clk = &osc4_clk, @@ -703,6 +727,12 @@ static struct pl061_platform_data gpio1_plat_data = { .irq_base = IRQ_GPIO1_START, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + #define AACI_IRQ { IRQ_AACI, NO_IRQ } #define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } @@ -772,7 +802,7 @@ AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); -AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL); +AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -843,6 +873,7 @@ void __init versatile_init(void) platform_device_register(&versatile_flash_device); platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); + platform_device_register(&char_lcd_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 334f0df4e948..13c7e5f90a82 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -304,7 +304,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) } -struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) +struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) { return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); } diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 6353459bb567..577df6cccb08 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -16,6 +16,7 @@ #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/pmu.h> +#include <asm/smp_twd.h> #include <mach/clkdev.h> #include <mach/ct-ca9x4.h> @@ -53,6 +54,7 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = { static void __init ct_ca9x4_map_io(void) { + twd_base = MMIO_P2V(A9_MPCORE_TWD); v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h index 8650f04136ef..f9e2f8d22962 100644 --- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -28,6 +28,7 @@ #define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000) #define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100) #define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200) +#define A9_MPCORE_TWD (CT_CA9X4_MPIC + 0x0600) #define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000) /* diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index c84239761cb4..817f0ad38a0b 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -298,8 +298,13 @@ static struct clk osc2_clk = { .rate = 24000000, }; +static struct clk dummy_apb_pclk; + static struct clk_lookup v2m_lookups[] = { - { /* UART0 */ + { /* AMBA bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ .dev_id = "mb:uart0", .clk = &osc2_clk, }, { /* UART1 */ diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index b2eda4dc1c34..7a1fa6adb7c3 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -36,6 +36,8 @@ #include <mach/nuc900_spi.h> #include <mach/map.h> #include <mach/fb.h> +#include <mach/regs-ldm.h> +#include <mach/w90p910_keypad.h> #include "cpu.h" @@ -207,7 +209,7 @@ static struct nuc900_spi_info nuc900_spiflash_data = { .divider = 24, .sleep = 0, .txnum = 0, - .txbitlen = 1, + .txbitlen = 8, .bus_num = 0, }; @@ -256,7 +258,7 @@ static struct spi_board_info nuc900_spi_board_info[] __initdata = { .modalias = "m25p80", .max_speed_hz = 20000000, .bus_num = 0, - .chip_select = 1, + .chip_select = 0, .platform_data = &nuc900_spi_flash_data, .mode = SPI_MODE_0, }, @@ -361,6 +363,39 @@ struct platform_device nuc900_device_fmi = { /* KPI controller*/ +static int nuc900_keymap[] = { + KEY(0, 0, KEY_A), + KEY(0, 1, KEY_B), + KEY(0, 2, KEY_C), + KEY(0, 3, KEY_D), + + KEY(1, 0, KEY_E), + KEY(1, 1, KEY_F), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_H), + + KEY(2, 0, KEY_I), + KEY(2, 1, KEY_J), + KEY(2, 2, KEY_K), + KEY(2, 3, KEY_L), + + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P), +}; + +static struct matrix_keymap_data nuc900_map_data = { + .keymap = nuc900_keymap, + .keymap_size = ARRAY_SIZE(nuc900_keymap), +}; + +struct w90p910_keypad_platform_data nuc900_keypad_info = { + .keymap_data = &nuc900_map_data, + .prescale = 0xfa, + .debounce = 0x50, +}; + static struct resource nuc900_kpi_resource[] = { [0] = { .start = W90X900_PA_KPI, @@ -380,9 +415,49 @@ struct platform_device nuc900_device_kpi = { .id = -1, .num_resources = ARRAY_SIZE(nuc900_kpi_resource), .resource = nuc900_kpi_resource, + .dev = { + .platform_data = &nuc900_keypad_info, + } }; -#ifdef CONFIG_FB_NUC900 +/* LCD controller*/ + +static struct nuc900fb_display __initdata nuc900_lcd_info[] = { + /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */ + [0] = { + .type = LCM_DCCS_VA_SRC_RGB565, + .width = 320, + .height = 240, + .xres = 320, + .yres = 240, + .bpp = 16, + .pixclock = 200000, + .left_margin = 34, + .right_margin = 54, + .hsync_len = 10, + .upper_margin = 18, + .lower_margin = 4, + .vsync_len = 1, + .dccs = 0x8e00041a, + .devctl = 0x060800c0, + .fbctrl = 0x00a000a0, + .scale = 0x04000400, + }, +}; + +static struct nuc900fb_mach_info nuc900_fb_info __initdata = { +#if defined(CONFIG_GPM1040A0_320X240) + .displays = &nuc900_lcd_info[0], +#else + .displays = nuc900_lcd_info, +#endif + .num_displays = ARRAY_SIZE(nuc900_lcd_info), + .default_display = 0, + .gpio_dir = 0x00000004, + .gpio_dir_mask = 0xFFFFFFFD, + .gpio_data = 0x00000004, + .gpio_data_mask = 0xFFFFFFFD, +}; static struct resource nuc900_lcd_resource[] = { [0] = { @@ -406,23 +481,10 @@ struct platform_device nuc900_device_lcd = { .dev = { .dma_mask = &nuc900_device_lcd_dmamask, .coherent_dma_mask = -1, + .platform_data = &nuc900_fb_info, } }; -void nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd) -{ - struct nuc900fb_mach_info *npd; - - npd = kmalloc(sizeof(*npd), GFP_KERNEL); - if (npd) { - memcpy(npd, pd, sizeof(*npd)); - nuc900_device_lcd.dev.platform_data = npd; - } else { - printk(KERN_ERR "no memory for LCD platform data\n"); - } -} -#endif - /* AUDIO controller*/ static u64 nuc900_device_audio_dmamask = -1; static struct resource nuc900_ac97_resource[] = { diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h new file mode 100644 index 000000000000..6087abd93ef5 --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-gcr.h + * + * Copyright (c) 2010 Nuvoton technology corporation + * All rights reserved. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_REGS_GCR_H +#define __ASM_ARCH_REGS_GCR_H + +/* Global control registers */ + +#define GCR_BA W90X900_VA_GCR +#define REG_PDID (GCR_BA+0x000) +#define REG_PWRON (GCR_BA+0x004) +#define REG_ARBCON (GCR_BA+0x008) +#define REG_MFSEL (GCR_BA+0x00C) +#define REG_EBIDPE (GCR_BA+0x010) +#define REG_LCDDPE (GCR_BA+0x014) +#define REG_GPIOCPE (GCR_BA+0x018) +#define REG_GPIODPE (GCR_BA+0x01C) +#define REG_GPIOEPE (GCR_BA+0x020) +#define REG_GPIOFPE (GCR_BA+0x024) +#define REG_GPIOGPE (GCR_BA+0x028) +#define REG_GPIOHPE (GCR_BA+0x02C) +#define REG_GPIOIPE (GCR_BA+0x030) +#define REG_GTMP1 (GCR_BA+0x034) +#define REG_GTMP2 (GCR_BA+0x038) +#define REG_GTMP3 (GCR_BA+0x03C) + +#endif /* __ASM_ARCH_REGS_GCR_H */ diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index b3edc3cccf52..04d295f89eb0 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -20,51 +20,10 @@ #include <asm/mach/map.h> #include <asm/mach-types.h> #include <mach/map.h> -#include <mach/regs-ldm.h> #include <mach/fb.h> #include "nuc950.h" -#ifdef CONFIG_FB_NUC900 -/* LCD Controller */ -static struct nuc900fb_display __initdata nuc950_lcd_info[] = { - /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */ - [0] = { - .type = LCM_DCCS_VA_SRC_RGB565, - .width = 320, - .height = 240, - .xres = 320, - .yres = 240, - .bpp = 16, - .pixclock = 200000, - .left_margin = 34, - .right_margin = 54, - .hsync_len = 10, - .upper_margin = 18, - .lower_margin = 4, - .vsync_len = 1, - .dccs = 0x8e00041a, - .devctl = 0x060800c0, - .fbctrl = 0x00a000a0, - .scale = 0x04000400, - }, -}; - -static struct nuc900fb_mach_info nuc950_fb_info __initdata = { -#if defined(CONFIG_GPM1040A0_320X240) - .displays = &nuc950_lcd_info[0], -#else - .displays = nuc950_lcd_info, -#endif - .num_displays = ARRAY_SIZE(nuc950_lcd_info), - .default_display = 0, - .gpio_dir = 0x00000004, - .gpio_dir_mask = 0xFFFFFFFD, - .gpio_data = 0x00000004, - .gpio_data_mask = 0xFFFFFFFD, -}; -#endif - static void __init nuc950evb_map_io(void) { nuc950_map_io(); @@ -74,9 +33,6 @@ static void __init nuc950evb_map_io(void) static void __init nuc950evb_init(void) { nuc950_board_init(); -#ifdef CONFIG_FB_NUC900 - nuc900_fb_set_platdata(&nuc950_fb_info); -#endif } MACHINE_START(W90P950EVB, "W90P950EVB") diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c index 656f03b3b629..1523f4136985 100644 --- a/arch/arm/mach-w90x900/nuc910.c +++ b/arch/arm/mach-w90x900/nuc910.c @@ -26,6 +26,8 @@ static struct platform_device *nuc910_dev[] __initdata = { &nuc900_device_ts, &nuc900_device_rtc, + &nuc900_device_lcd, + &nuc900_device_kpi, }; /* define specific CPU platform io map */ diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c index 4d1f1ab044c4..5704f74a50ee 100644 --- a/arch/arm/mach-w90x900/nuc950.c +++ b/arch/arm/mach-w90x900/nuc950.c @@ -26,9 +26,7 @@ static struct platform_device *nuc950_dev[] __initdata = { &nuc900_device_kpi, &nuc900_device_fmi, -#ifdef CONFIG_FB_NUC900 &nuc900_device_lcd, -#endif }; /* define specific CPU platform io map */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 101105e52610..87ec141fcaa6 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -717,17 +717,6 @@ config TLS_REG_EMUL a few prototypes like that in existence) and therefore access to that required register must be emulated. -config HAS_TLS_REG - bool - depends on !TLS_REG_EMUL - default y if SMP || CPU_32v7 - help - This selects support for the CP15 thread register. - It is defined to be available on some ARMv6 processors (including - all SMP capable ARMv6's) or later processors. User space may - assume directly accessing that register and always obtain the - expected value only on ARMv7 and above. - config NEEDS_SYSCALL_FOR_CMPXCHG bool help diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index e8d34a80851c..d63b6c413758 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -15,7 +15,6 @@ endif obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o -obj-$(CONFIG_DISCONTIGMEM) += discontig.o obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 6f98c358989a..d073b64ae87e 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -924,8 +924,20 @@ static int __init alignment_init(void) ai_usermode = UM_FIXUP; } - hook_fault_code(1, do_alignment, SIGILL, "alignment exception"); - hook_fault_code(3, do_alignment, SIGILL, "alignment exception"); + hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, + "alignment exception"); + + /* + * ARMv6K and ARMv7 use fault status 3 (0b00011) as Access Flag section + * fault, not as alignment error. + * + * TODO: handle ARMv6K properly. Runtime check for 'K' extension is + * needed. + */ + if (cpu_architecture() <= CPU_ARCH_ARMv6) { + hook_fault_code(3, do_alignment, SIGBUS, BUS_ADRALN, + "alignment exception"); + } return 0; } diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c deleted file mode 100644 index c8c0c4b0f0a3..000000000000 --- a/arch/arm/mm/discontig.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mm/discontig.c - * - * Discontiguous memory support. - * - * Initial code: Copyright (C) 1999-2000 Nicolas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/mmzone.h> -#include <linux/bootmem.h> - -#if MAX_NUMNODES != 4 && MAX_NUMNODES != 16 -# error Fix Me Please -#endif - -/* - * Our node_data structure for discontiguous memory. - */ - -pg_data_t discontig_node_data[MAX_NUMNODES] = { - { .bdata = &bootmem_node_data[0] }, - { .bdata = &bootmem_node_data[1] }, - { .bdata = &bootmem_node_data[2] }, - { .bdata = &bootmem_node_data[3] }, -#if MAX_NUMNODES == 16 - { .bdata = &bootmem_node_data[4] }, - { .bdata = &bootmem_node_data[5] }, - { .bdata = &bootmem_node_data[6] }, - { .bdata = &bootmem_node_data[7] }, - { .bdata = &bootmem_node_data[8] }, - { .bdata = &bootmem_node_data[9] }, - { .bdata = &bootmem_node_data[10] }, - { .bdata = &bootmem_node_data[11] }, - { .bdata = &bootmem_node_data[12] }, - { .bdata = &bootmem_node_data[13] }, - { .bdata = &bootmem_node_data[14] }, - { .bdata = &bootmem_node_data[15] }, -#endif -}; - -EXPORT_SYMBOL(discontig_node_data); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 9e7742f0a102..c704eed63c5d 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -183,6 +183,8 @@ static void * __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) { struct arm_vmregion *c; + size_t align; + int bit; if (!consistent_pte[0]) { printk(KERN_ERR "%s: not initialised\n", __func__); @@ -191,9 +193,20 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) } /* + * Align the virtual region allocation - maximum alignment is + * a section size, minimum is a page size. This helps reduce + * fragmentation of the DMA space, and also prevents allocations + * smaller than a section from crossing a section boundary. + */ + bit = fls(size - 1) + 1; + if (bit > SECTION_SHIFT) + bit = SECTION_SHIFT; + align = 1 << bit; + + /* * Allocate a virtual address in the consistent mapping region. */ - c = arm_vmregion_alloc(&consistent_head, size, + c = arm_vmregion_alloc(&consistent_head, align, size, gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); if (c) { pte_t *pte; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index cbfb2edcf7d1..23b0b03af5ea 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -413,7 +413,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr, pmd_k = pmd_offset(pgd_k, addr); pmd = pmd_offset(pgd, addr); - if (pmd_none(*pmd_k)) + /* + * On ARM one Linux PGD entry contains two hardware entries (see page + * tables layout in pgtable.h). We normally guarantee that we always + * fill both L1 entries. But create_mapping() doesn't follow the rule. + * It can create inidividual L1 entries, so here we have to call + * pmd_none() check for the entry really corresponded to address, not + * for the first of pair. + */ + index = (addr >> SECTION_SHIFT) & 1; + if (pmd_none(pmd_k[index])) goto bad_area; copy_pmd(pmd, pmd_k); @@ -463,15 +472,10 @@ static struct fsr_info { * defines these to be "precise" aborts. */ { do_bad, SIGSEGV, 0, "vector exception" }, - { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, { do_bad, SIGKILL, 0, "terminal exception" }, - { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, -/* Do we need runtime check ? */ -#if __LINUX_ARM_ARCH__ < 6 + { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, { do_bad, SIGBUS, 0, "external abort on linefetch" }, -#else - { do_translation_fault, SIGSEGV, SEGV_MAPERR, "I-cache maintenance fault" }, -#endif { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, { do_bad, SIGBUS, 0, "external abort on linefetch" }, { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, @@ -508,13 +512,15 @@ static struct fsr_info { void __init hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), - int sig, const char *name) + int sig, int code, const char *name) { - if (nr >= 0 && nr < ARRAY_SIZE(fsr_info)) { - fsr_info[nr].fn = fn; - fsr_info[nr].sig = sig; - fsr_info[nr].name = name; - } + if (nr < 0 || nr >= ARRAY_SIZE(fsr_info)) + BUG(); + + fsr_info[nr].fn = fn; + fsr_info[nr].sig = sig; + fsr_info[nr].code = code; + fsr_info[nr].name = name; } /* @@ -594,3 +600,25 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) arm_notify_die("", regs, &info, ifsr, 0); } +static int __init exceptions_init(void) +{ + if (cpu_architecture() >= CPU_ARCH_ARMv6) { + hook_fault_code(4, do_translation_fault, SIGSEGV, SEGV_MAPERR, + "I-cache maintenance fault"); + } + + if (cpu_architecture() >= CPU_ARCH_ARMv7) { + /* + * TODO: Access flag faults introduced in ARMv6K. + * Runtime check for 'K' extension is needed + */ + hook_fault_code(3, do_bad, SIGSEGV, SEGV_MAPERR, + "section access flag fault"); + hook_fault_code(6, do_bad, SIGSEGV, SEGV_MAPERR, + "section access flag fault"); + } + + return 0; +} + +arch_initcall(exceptions_init); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index f6a999465323..7185b00650fe 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -17,6 +17,7 @@ #include <linux/initrd.h> #include <linux/highmem.h> #include <linux/gfp.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/sections.h> @@ -79,38 +80,37 @@ struct meminfo meminfo; void show_mem(void) { int free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0, slab = 0, node, i; + int shared = 0, cached = 0, slab = 0, i; struct meminfo * mi = &meminfo; printk("Mem-info:\n"); show_free_areas(); - for_each_online_node(node) { - for_each_nodebank (i,mi,node) { - struct membank *bank = &mi->bank[i]; - unsigned int pfn1, pfn2; - struct page *page, *end; - - pfn1 = bank_pfn_start(bank); - pfn2 = bank_pfn_end(bank); - - page = pfn_to_page(pfn1); - end = pfn_to_page(pfn2 - 1) + 1; - - do { - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - page++; - } while (page < end); - } + + for_each_bank (i, mi) { + struct membank *bank = &mi->bank[i]; + unsigned int pfn1, pfn2; + struct page *page, *end; + + pfn1 = bank_pfn_start(bank); + pfn2 = bank_pfn_end(bank); + + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; + + do { + total++; + if (PageReserved(page)) + reserved++; + else if (PageSwapCache(page)) + cached++; + else if (PageSlab(page)) + slab++; + else if (!page_count(page)) + free++; + else + shared += page_count(page) - 1; + page++; + } while (page < end); } printk("%d pages of RAM\n", total); @@ -121,7 +121,7 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } -static void __init find_node_limits(int node, struct meminfo *mi, +static void __init find_limits(struct meminfo *mi, unsigned long *min, unsigned long *max_low, unsigned long *max_high) { int i; @@ -129,7 +129,7 @@ static void __init find_node_limits(int node, struct meminfo *mi, *min = -1UL; *max_low = *max_high = 0; - for_each_nodebank(i, mi, node) { + for_each_bank (i, mi) { struct membank *bank = &mi->bank[i]; unsigned long start, end; @@ -147,155 +147,64 @@ static void __init find_node_limits(int node, struct meminfo *mi, } } -/* - * FIXME: We really want to avoid allocating the bootmap bitmap - * over the top of the initrd. Hopefully, this is located towards - * the start of a bank, so if we allocate the bootmap bitmap at - * the end, we won't clash. - */ -static unsigned int __init -find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) -{ - unsigned int start_pfn, i, bootmap_pfn; - - start_pfn = PAGE_ALIGN(__pa(_end)) >> PAGE_SHIFT; - bootmap_pfn = 0; - - for_each_nodebank(i, mi, node) { - struct membank *bank = &mi->bank[i]; - unsigned int start, end; - - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (end < start_pfn) - continue; - - if (start < start_pfn) - start = start_pfn; - - if (end <= start) - continue; - - if (end - start >= bootmap_pages) { - bootmap_pfn = start; - break; - } - } - - if (bootmap_pfn == 0) - BUG(); - - return bootmap_pfn; -} - -static int __init check_initrd(struct meminfo *mi) -{ - int initrd_node = -2; -#ifdef CONFIG_BLK_DEV_INITRD - unsigned long end = phys_initrd_start + phys_initrd_size; - - /* - * Make sure that the initrd is within a valid area of - * memory. - */ - if (phys_initrd_size) { - unsigned int i; - - initrd_node = -1; - - for (i = 0; i < mi->nr_banks; i++) { - struct membank *bank = &mi->bank[i]; - if (bank_phys_start(bank) <= phys_initrd_start && - end <= bank_phys_end(bank)) - initrd_node = bank->node; - } - } - - if (initrd_node == -1) { - printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond " - "physical memory - disabling initrd\n", - phys_initrd_start, phys_initrd_size); - phys_initrd_start = phys_initrd_size = 0; - } -#endif - - return initrd_node; -} - -static void __init bootmem_init_node(int node, struct meminfo *mi, +static void __init arm_bootmem_init(struct meminfo *mi, unsigned long start_pfn, unsigned long end_pfn) { - unsigned long boot_pfn; unsigned int boot_pages; + phys_addr_t bitmap; pg_data_t *pgdat; int i; /* - * Allocate the bootmem bitmap page. + * Allocate the bootmem bitmap page. This must be in a region + * of memory which has already been mapped. */ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); - boot_pfn = find_bootmap_pfn(node, mi, boot_pages); + bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES, + __pfn_to_phys(end_pfn)); /* - * Initialise the bootmem allocator for this node, handing the + * Initialise the bootmem allocator, handing the * memory banks over to bootmem. */ - node_set_online(node); - pgdat = NODE_DATA(node); - init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn); + node_set_online(0); + pgdat = NODE_DATA(0); + init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn); - for_each_nodebank(i, mi, node) { + for_each_bank(i, mi) { struct membank *bank = &mi->bank[i]; if (!bank->highmem) - free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); + free_bootmem(bank_phys_start(bank), bank_phys_size(bank)); } /* - * Reserve the bootmem bitmap for this node. + * Reserve the memblock reserved regions in bootmem. */ - reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, - boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); -} - -static void __init bootmem_reserve_initrd(int node) -{ -#ifdef CONFIG_BLK_DEV_INITRD - pg_data_t *pgdat = NODE_DATA(node); - int res; - - res = reserve_bootmem_node(pgdat, phys_initrd_start, - phys_initrd_size, BOOTMEM_EXCLUSIVE); - - if (res == 0) { - initrd_start = __phys_to_virt(phys_initrd_start); - initrd_end = initrd_start + phys_initrd_size; - } else { - printk(KERN_ERR - "INITRD: 0x%08lx+0x%08lx overlaps in-use " - "memory region - disabling initrd\n", - phys_initrd_start, phys_initrd_size); + for (i = 0; i < memblock.reserved.cnt; i++) { + phys_addr_t start = memblock_start_pfn(&memblock.reserved, i); + if (start >= start_pfn && + memblock_end_pfn(&memblock.reserved, i) <= end_pfn) + reserve_bootmem_node(pgdat, __pfn_to_phys(start), + memblock_size_bytes(&memblock.reserved, i), + BOOTMEM_DEFAULT); } -#endif } -static void __init bootmem_free_node(int node, struct meminfo *mi) +static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min, + unsigned long max_low, unsigned long max_high) { unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long min, max_low, max_high; int i; - find_node_limits(node, mi, &min, &max_low, &max_high); - /* - * initialise the zones within this node. + * initialise the zones. */ memset(zone_size, 0, sizeof(zone_size)); /* - * The size of this node has already been determined. If we need - * to do anything fancy with the allocation of this memory to the - * zones, now is the time to do it. + * The memory size has already been determined. If we need + * to do anything fancy with the allocation of this memory + * to the zones, now is the time to do it. */ zone_size[0] = max_low - min; #ifdef CONFIG_HIGHMEM @@ -303,11 +212,11 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) #endif /* - * For each bank in this node, calculate the size of the holes. - * holes = node_size - sum(bank_sizes_in_node) + * Calculate the size of the holes. + * holes = node_size - sum(bank_sizes) */ memcpy(zhole_size, zone_size, sizeof(zhole_size)); - for_each_nodebank(i, mi, node) { + for_each_bank(i, mi) { int idx = 0; #ifdef CONFIG_HIGHMEM if (mi->bank[i].highmem) @@ -320,24 +229,23 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) * Adjust the sizes according to any special requirements for * this machine type. */ - arch_adjust_zones(node, zone_size, zhole_size); + arch_adjust_zones(zone_size, zhole_size); - free_area_init_node(node, zone_size, min, zhole_size); + free_area_init_node(0, zone_size, min, zhole_size); } #ifndef CONFIG_SPARSEMEM int pfn_valid(unsigned long pfn) { - struct meminfo *mi = &meminfo; - unsigned int left = 0, right = mi->nr_banks; + struct memblock_region *mem = &memblock.memory; + unsigned int left = 0, right = mem->cnt; do { unsigned int mid = (right + left) / 2; - struct membank *bank = &mi->bank[mid]; - if (pfn < bank_pfn_start(bank)) + if (pfn < memblock_start_pfn(mem, mid)) right = mid; - else if (pfn >= bank_pfn_end(bank)) + else if (pfn >= memblock_end_pfn(mem, mid)) left = mid + 1; else return 1; @@ -346,73 +254,69 @@ int pfn_valid(unsigned long pfn) } EXPORT_SYMBOL(pfn_valid); -static void arm_memory_present(struct meminfo *mi, int node) +static void arm_memory_present(void) { } #else -static void arm_memory_present(struct meminfo *mi, int node) +static void arm_memory_present(void) { int i; - for_each_nodebank(i, mi, node) { - struct membank *bank = &mi->bank[i]; - memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); - } + for (i = 0; i < memblock.memory.cnt; i++) + memory_present(0, memblock_start_pfn(&memblock.memory, i), + memblock_end_pfn(&memblock.memory, i)); } #endif -void __init bootmem_init(void) +void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) { - struct meminfo *mi = &meminfo; - unsigned long min, max_low, max_high; - int node, initrd_node; + int i; - /* - * Locate which node contains the ramdisk image, if any. - */ - initrd_node = check_initrd(mi); + memblock_init(); + for (i = 0; i < mi->nr_banks; i++) + memblock_add(mi->bank[i].start, mi->bank[i].size); - max_low = max_high = 0; + /* Register the kernel text, kernel data and initrd with memblock. */ +#ifdef CONFIG_XIP_KERNEL + memblock_reserve(__pa(_data), _end - _data); +#else + memblock_reserve(__pa(_stext), _end - _stext); +#endif +#ifdef CONFIG_BLK_DEV_INITRD + if (phys_initrd_size) { + memblock_reserve(phys_initrd_start, phys_initrd_size); - /* - * Run through each node initialising the bootmem allocator. - */ - for_each_node(node) { - unsigned long node_low, node_high; + /* Now convert initrd to virtual addresses */ + initrd_start = __phys_to_virt(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; + } +#endif - find_node_limits(node, mi, &min, &node_low, &node_high); + arm_mm_memblock_reserve(); - if (node_low > max_low) - max_low = node_low; - if (node_high > max_high) - max_high = node_high; + /* reserve any platform specific memblock areas */ + if (mdesc->reserve) + mdesc->reserve(); - /* - * If there is no memory in this node, ignore it. - * (We can't have nodes which have no lowmem) - */ - if (node_low == 0) - continue; + memblock_analyze(); + memblock_dump_all(); +} - bootmem_init_node(node, mi, min, node_low); +void __init bootmem_init(void) +{ + struct meminfo *mi = &meminfo; + unsigned long min, max_low, max_high; - /* - * Reserve any special node zero regions. - */ - if (node == 0) - reserve_node_zero(NODE_DATA(node)); + max_low = max_high = 0; - /* - * If the initrd is in this node, reserve its memory. - */ - if (node == initrd_node) - bootmem_reserve_initrd(node); + find_limits(mi, &min, &max_low, &max_high); - /* - * Sparsemem tries to allocate bootmem in memory_present(), - * so must be done after the fixed reservations - */ - arm_memory_present(mi, node); - } + arm_bootmem_init(mi, min, max_low); + + /* + * Sparsemem tries to allocate bootmem in memory_present(), + * so must be done after the fixed reservations + */ + arm_memory_present(); /* * sparse_init() needs the bootmem allocator up and running. @@ -420,12 +324,11 @@ void __init bootmem_init(void) sparse_init(); /* - * Now free memory in each node - free_area_init_node needs + * Now free the memory - free_area_init_node needs * the sparse mem_map arrays initialized by sparse_init() * for memmap_init_zone(), otherwise all PFNs are invalid. */ - for_each_node(node) - bootmem_free_node(node, mi); + arm_bootmem_free(mi, min, max_low, max_high); high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; @@ -460,7 +363,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) } static inline void -free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) +free_memmap(unsigned long start_pfn, unsigned long end_pfn) { struct page *start_pg, *end_pg; unsigned long pg, pgend; @@ -483,40 +386,39 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) * free the section of the memmap array. */ if (pg < pgend) - free_bootmem_node(NODE_DATA(node), pg, pgend - pg); + free_bootmem(pg, pgend - pg); } /* * The mem_map array can get very big. Free the unused area of the memory map. */ -static void __init free_unused_memmap_node(int node, struct meminfo *mi) +static void __init free_unused_memmap(struct meminfo *mi) { unsigned long bank_start, prev_bank_end = 0; unsigned int i; /* - * [FIXME] This relies on each bank being in address order. This - * may not be the case, especially if the user has provided the - * information on the command line. + * This relies on each bank being in address order. + * The banks are sorted previously in bootmem_init(). */ - for_each_nodebank(i, mi, node) { + for_each_bank(i, mi) { struct membank *bank = &mi->bank[i]; bank_start = bank_pfn_start(bank); - if (bank_start < prev_bank_end) { - printk(KERN_ERR "MEM: unordered memory banks. " - "Not freeing memmap.\n"); - break; - } /* * If we had a previous bank, and there is a space * between the current bank and the previous, free it. */ - if (prev_bank_end && prev_bank_end != bank_start) - free_memmap(node, prev_bank_end, bank_start); + if (prev_bank_end && prev_bank_end < bank_start) + free_memmap(prev_bank_end, bank_start); - prev_bank_end = bank_pfn_end(bank); + /* + * Align up here since the VM subsystem insists that the + * memmap entries are valid from the bank end aligned to + * MAX_ORDER_NR_PAGES. + */ + prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES); } } @@ -528,21 +430,19 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi) void __init mem_init(void) { unsigned long reserved_pages, free_pages; - int i, node; + int i; +#ifdef CONFIG_HAVE_TCM + /* These pointers are filled in on TCM detection */ + extern u32 dtcm_end; + extern u32 itcm_end; +#endif -#ifndef CONFIG_DISCONTIGMEM max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map; -#endif /* this will put all unused low memory onto the freelists */ - for_each_online_node(node) { - pg_data_t *pgdat = NODE_DATA(node); + free_unused_memmap(&meminfo); - free_unused_memmap_node(node, &meminfo); - - if (pgdat->node_spanned_pages != 0) - totalram_pages += free_all_bootmem_node(pgdat); - } + totalram_pages += free_all_bootmem(); #ifdef CONFIG_SA1111 /* now that our DMA memory is actually so designated, we can free it */ @@ -552,39 +452,35 @@ void __init mem_init(void) #ifdef CONFIG_HIGHMEM /* set highmem page free */ - for_each_online_node(node) { - for_each_nodebank (i, &meminfo, node) { - unsigned long start = bank_pfn_start(&meminfo.bank[i]); - unsigned long end = bank_pfn_end(&meminfo.bank[i]); - if (start >= max_low_pfn + PHYS_PFN_OFFSET) - totalhigh_pages += free_area(start, end, NULL); - } + for_each_bank (i, &meminfo) { + unsigned long start = bank_pfn_start(&meminfo.bank[i]); + unsigned long end = bank_pfn_end(&meminfo.bank[i]); + if (start >= max_low_pfn + PHYS_PFN_OFFSET) + totalhigh_pages += free_area(start, end, NULL); } totalram_pages += totalhigh_pages; #endif reserved_pages = free_pages = 0; - for_each_online_node(node) { - for_each_nodebank(i, &meminfo, node) { - struct membank *bank = &meminfo.bank[i]; - unsigned int pfn1, pfn2; - struct page *page, *end; - - pfn1 = bank_pfn_start(bank); - pfn2 = bank_pfn_end(bank); - - page = pfn_to_page(pfn1); - end = pfn_to_page(pfn2 - 1) + 1; - - do { - if (PageReserved(page)) - reserved_pages++; - else if (!page_count(page)) - free_pages++; - page++; - } while (page < end); - } + for_each_bank(i, &meminfo) { + struct membank *bank = &meminfo.bank[i]; + unsigned int pfn1, pfn2; + struct page *page, *end; + + pfn1 = bank_pfn_start(bank); + pfn2 = bank_pfn_end(bank); + + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; + + do { + if (PageReserved(page)) + reserved_pages++; + else if (!page_count(page)) + free_pages++; + page++; + } while (page < end); } /* @@ -611,6 +507,10 @@ void __init mem_init(void) printk(KERN_NOTICE "Virtual kernel memory layout:\n" " vector : 0x%08lx - 0x%08lx (%4ld kB)\n" +#ifdef CONFIG_HAVE_TCM + " DTCM : 0x%08lx - 0x%08lx (%4ld kB)\n" + " ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n" +#endif " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" #ifdef CONFIG_MMU " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n" @@ -627,6 +527,10 @@ void __init mem_init(void) MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) + (PAGE_SIZE)), +#ifdef CONFIG_HAVE_TCM + MLK(DTCM_OFFSET, (unsigned long) dtcm_end), + MLK(ITCM_OFFSET, (unsigned long) itcm_end), +#endif MLK(FIXADDR_START, FIXADDR_TOP), #ifdef CONFIG_MMU MLM(CONSISTENT_BASE, CONSISTENT_END), diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 28c8b950ef04..ab506272b2d3 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -42,78 +42,11 @@ */ #define VM_ARM_SECTION_MAPPING 0x80000000 -static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end, - unsigned long phys_addr, const struct mem_type *type) -{ - pgprot_t prot = __pgprot(type->prot_pte); - pte_t *pte; - - pte = pte_alloc_kernel(pmd, addr); - if (!pte) - return -ENOMEM; - - do { - if (!pte_none(*pte)) - goto bad; - - set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0); - phys_addr += PAGE_SIZE; - } while (pte++, addr += PAGE_SIZE, addr != end); - return 0; - - bad: - printk(KERN_CRIT "remap_area_pte: page already exists\n"); - BUG(); -} - -static inline int remap_area_pmd(pgd_t *pgd, unsigned long addr, - unsigned long end, unsigned long phys_addr, - const struct mem_type *type) -{ - unsigned long next; - pmd_t *pmd; - int ret = 0; - - pmd = pmd_alloc(&init_mm, pgd, addr); - if (!pmd) - return -ENOMEM; - - do { - next = pmd_addr_end(addr, end); - ret = remap_area_pte(pmd, addr, next, phys_addr, type); - if (ret) - return ret; - phys_addr += next - addr; - } while (pmd++, addr = next, addr != end); - return ret; -} - -static int remap_area_pages(unsigned long start, unsigned long pfn, - size_t size, const struct mem_type *type) -{ - unsigned long addr = start; - unsigned long next, end = start + size; - unsigned long phys_addr = __pfn_to_phys(pfn); - pgd_t *pgd; - int err = 0; - - BUG_ON(addr >= end); - pgd = pgd_offset_k(addr); - do { - next = pgd_addr_end(addr, end); - err = remap_area_pmd(pgd, addr, next, phys_addr, type); - if (err) - break; - phys_addr += next - addr; - } while (pgd++, addr = next, addr != end); - - return err; -} - int ioremap_page(unsigned long virt, unsigned long phys, const struct mem_type *mtype) { - return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype); + return ioremap_page_range(virt, virt + PAGE_SIZE, phys, + __pgprot(mtype->prot_pte)); } EXPORT_SYMBOL(ioremap_page); @@ -268,6 +201,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK)) return NULL; + /* + * Don't allow RAM to be mapped - this causes problems with ARMv6+ + */ + if (WARN_ON(pfn_valid(pfn))) + return NULL; + type = get_mem_type(mtype); if (!type) return NULL; @@ -294,7 +233,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, err = remap_area_sections(addr, pfn, size, type); } else #endif - err = remap_area_pages(addr, pfn, size, type); + err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn), + __pgprot(type->prot_pte)); if (err) { vunmap((void *)addr); diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 815d08eecbb0..6630620380a4 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -28,7 +28,5 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif -struct pglist_data; - void __init bootmem_init(void); -void reserve_node_zero(struct pglist_data *pgdat); +void arm_mm_memblock_reserve(void); diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index f5abc51c5a07..4f5b39687df5 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -7,6 +7,7 @@ #include <linux/shm.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/random.h> #include <asm/cputype.h> #include <asm/system.h> @@ -80,6 +81,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, start_addr = addr = TASK_UNMAPPED_BASE; mm->cached_hole_size = 0; } + /* 8 bits of randomness in 20 address space bits */ + if (current->flags & PF_RANDOMIZE) + addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT; full_search: if (do_align) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 285894171186..6e1c4f6a2b3f 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -11,13 +11,12 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/init.h> -#include <linux/bootmem.h> #include <linux/mman.h> #include <linux/nodemask.h> +#include <linux/memblock.h> #include <linux/sort.h> #include <asm/cputype.h> -#include <asm/mach-types.h> #include <asm/sections.h> #include <asm/cachetype.h> #include <asm/setup.h> @@ -258,6 +257,19 @@ static struct mem_type mem_types[] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, }, + [MT_MEMORY_DTCM] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, + .domain = DOMAIN_KERNEL, + }, + [MT_MEMORY_ITCM] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_USER | L_PTE_EXEC, + .prot_l1 = PMD_TYPE_TABLE, + .domain = DOMAIN_IO, + }, }; const struct mem_type *get_mem_type(unsigned int type) @@ -488,18 +500,28 @@ static void __init build_mem_type_table(void) #define vectors_base() (vectors_high() ? 0xffff0000 : 0) -static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, - unsigned long end, unsigned long pfn, - const struct mem_type *type) +static void __init *early_alloc(unsigned long sz) { - pte_t *pte; + void *ptr = __va(memblock_alloc(sz, sz)); + memset(ptr, 0, sz); + return ptr; +} +static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) +{ if (pmd_none(*pmd)) { - pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t)); - __pmd_populate(pmd, __pa(pte) | type->prot_l1); + pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t)); + __pmd_populate(pmd, __pa(pte) | prot); } + BUG_ON(pmd_bad(*pmd)); + return pte_offset_kernel(pmd, addr); +} - pte = pte_offset_kernel(pmd, addr); +static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, + unsigned long end, unsigned long pfn, + const struct mem_type *type) +{ + pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1); do { set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0); pfn++; @@ -668,7 +690,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr) create_mapping(io_desc + i); } -static unsigned long __initdata vmalloc_reserve = SZ_128M; +static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M); /* * vmalloc=size forces the vmalloc area to be exactly 'size' @@ -677,7 +699,7 @@ static unsigned long __initdata vmalloc_reserve = SZ_128M; */ static int __init early_vmalloc(char *arg) { - vmalloc_reserve = memparse(arg, NULL); + unsigned long vmalloc_reserve = memparse(arg, NULL); if (vmalloc_reserve < SZ_16M) { vmalloc_reserve = SZ_16M; @@ -692,22 +714,26 @@ static int __init early_vmalloc(char *arg) "vmalloc area is too big, limiting to %luMB\n", vmalloc_reserve >> 20); } + + vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve); return 0; } early_param("vmalloc", early_vmalloc); -#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve) +phys_addr_t lowmem_end_addr; static void __init sanity_check_meminfo(void) { int i, j, highmem = 0; + lowmem_end_addr = __pa(vmalloc_min - 1) + 1; + for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM - if (__va(bank->start) > VMALLOC_MIN || + if (__va(bank->start) > vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) highmem = 1; @@ -717,8 +743,8 @@ static void __init sanity_check_meminfo(void) * Split those memory banks which are partially overlapping * the vmalloc area greatly simplifying things later. */ - if (__va(bank->start) < VMALLOC_MIN && - bank->size > VMALLOC_MIN - __va(bank->start)) { + if (__va(bank->start) < vmalloc_min && + bank->size > vmalloc_min - __va(bank->start)) { if (meminfo.nr_banks >= NR_BANKS) { printk(KERN_CRIT "NR_BANKS too low, " "ignoring high memory\n"); @@ -727,12 +753,12 @@ static void __init sanity_check_meminfo(void) (meminfo.nr_banks - i) * sizeof(*bank)); meminfo.nr_banks++; i++; - bank[1].size -= VMALLOC_MIN - __va(bank->start); - bank[1].start = __pa(VMALLOC_MIN - 1) + 1; + bank[1].size -= vmalloc_min - __va(bank->start); + bank[1].start = __pa(vmalloc_min - 1) + 1; bank[1].highmem = highmem = 1; j++; } - bank->size = VMALLOC_MIN - __va(bank->start); + bank->size = vmalloc_min - __va(bank->start); } #else bank->highmem = highmem; @@ -741,7 +767,7 @@ static void __init sanity_check_meminfo(void) * Check whether this memory bank would entirely overlap * the vmalloc area. */ - if (__va(bank->start) >= VMALLOC_MIN || + if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) { printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " "(vmalloc region overlap).\n", @@ -753,9 +779,9 @@ static void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > VMALLOC_MIN || + if (__va(bank->start + bank->size) > vmalloc_min || __va(bank->start + bank->size) < __va(bank->start)) { - unsigned long newsize = VMALLOC_MIN - __va(bank->start); + unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx " "to -%.8lx (vmalloc region overlap).\n", bank->start, bank->start + bank->size - 1, @@ -827,101 +853,23 @@ static inline void prepare_page_table(void) } /* - * Reserve the various regions of node 0 + * Reserve the special regions of memory */ -void __init reserve_node_zero(pg_data_t *pgdat) +void __init arm_mm_memblock_reserve(void) { - unsigned long res_size = 0; - - /* - * Register the kernel text and data with bootmem. - * Note that this can only be in node 0. - */ -#ifdef CONFIG_XIP_KERNEL - reserve_bootmem_node(pgdat, __pa(_data), _end - _data, - BOOTMEM_DEFAULT); -#else - reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext, - BOOTMEM_DEFAULT); -#endif - /* * Reserve the page tables. These are already in use, * and can only be in node 0. */ - reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), - PTRS_PER_PGD * sizeof(pgd_t), BOOTMEM_DEFAULT); - - /* - * Hmm... This should go elsewhere, but we really really need to - * stop things allocating the low memory; ideally we need a better - * implementation of GFP_DMA which does not assume that DMA-able - * memory starts at zero. - */ - if (machine_is_integrator() || machine_is_cintegrator()) - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; - - /* - * These should likewise go elsewhere. They pre-reserve the - * screen memory region at the start of main system memory. - */ - if (machine_is_edb7211()) - res_size = 0x00020000; - if (machine_is_p720t()) - res_size = 0x00014000; - - /* H1940, RX3715 and RX1950 need to reserve this for suspend */ - - if (machine_is_h1940() || machine_is_rx3715() - || machine_is_rx1950()) { - reserve_bootmem_node(pgdat, 0x30003000, 0x1000, - BOOTMEM_DEFAULT); - reserve_bootmem_node(pgdat, 0x30081000, 0x1000, - BOOTMEM_DEFAULT); - } - - if (machine_is_palmld() || machine_is_palmtx()) { - reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, - BOOTMEM_EXCLUSIVE); - reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, - BOOTMEM_EXCLUSIVE); - } - - if (machine_is_treo680() || machine_is_centro()) { - reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, - BOOTMEM_EXCLUSIVE); - reserve_bootmem_node(pgdat, 0xa2000000, 0x1000, - BOOTMEM_EXCLUSIVE); - } - - if (machine_is_palmt5()) - reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, - BOOTMEM_EXCLUSIVE); - - /* - * U300 - This platform family can share physical memory - * between two ARM cpus, one running Linux and the other - * running another OS. - */ - if (machine_is_u300()) { -#ifdef CONFIG_MACH_U300_SINGLE_RAM -#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \ - CONFIG_MACH_U300_2MB_ALIGNMENT_FIX - res_size = 0x00100000; -#endif -#endif - } + memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our * precious DMA-able memory... */ - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; + memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET); #endif - if (res_size) - reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size, - BOOTMEM_DEFAULT); } /* @@ -940,7 +888,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) /* * Allocate the vector page early. */ - vectors = alloc_bootmem_low_pages(PAGE_SIZE); + vectors = early_alloc(PAGE_SIZE); for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); @@ -1011,11 +959,8 @@ static void __init devicemaps_init(struct machine_desc *mdesc) static void __init kmap_init(void) { #ifdef CONFIG_HIGHMEM - pmd_t *pmd = pmd_off_k(PKMAP_BASE); - pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t)); - BUG_ON(!pmd_none(*pmd) || !pte); - __pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE); - pkmap_page_table = pte + PTRS_PER_PTE; + pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE), + PKMAP_BASE, _PAGE_KERNEL_TABLE); #endif } @@ -1066,17 +1011,16 @@ void __init paging_init(struct machine_desc *mdesc) sanity_check_meminfo(); prepare_page_table(); map_lowmem(); - bootmem_init(); devicemaps_init(mdesc); kmap_init(); top_pmd = pmd_off_k(0xffff0000); - /* - * allocate the zero page. Note that this always succeeds and - * returns a zeroed result. - */ - zero_page = alloc_bootmem_low_pages(PAGE_SIZE); + /* allocate the zero page. */ + zero_page = early_alloc(PAGE_SIZE); + + bootmem_init(); + empty_zero_page = virt_to_page(zero_page); __flush_dcache_page(NULL, empty_zero_page); } diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 33b327379f07..687d02319a41 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -6,8 +6,8 @@ #include <linux/module.h> #include <linux/mm.h> #include <linux/pagemap.h> -#include <linux/bootmem.h> #include <linux/io.h> +#include <linux/memblock.h> #include <asm/cacheflush.h> #include <asm/sections.h> @@ -17,30 +17,14 @@ #include "mm.h" -/* - * Reserve the various regions of node 0 - */ -void __init reserve_node_zero(pg_data_t *pgdat) +void __init arm_mm_memblock_reserve(void) { /* - * Register the kernel text and data with bootmem. - * Note that this can only be in node 0. - */ -#ifdef CONFIG_XIP_KERNEL - reserve_bootmem_node(pgdat, __pa(_data), _end - _data, - BOOTMEM_DEFAULT); -#else - reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext, - BOOTMEM_DEFAULT); -#endif - - /* * Register the exception vector page. * some architectures which the DRAM is the exception vector to trap, * alloc_page breaks with error, although it is not NULL, but "0." */ - reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE, - BOOTMEM_DEFAULT); + memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); } /* diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 72507c630ceb..203a4e944d9e 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -79,15 +79,11 @@ ENTRY(cpu_arm1020_proc_init) * cpu_arm1020_proc_fin() */ ENTRY(cpu_arm1020_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1020_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1020_reset(loc) diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index d27829805609..1a511e765909 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -79,15 +79,11 @@ ENTRY(cpu_arm1020e_proc_init) * cpu_arm1020e_proc_fin() */ ENTRY(cpu_arm1020e_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1020e_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1020e_reset(loc) diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index ce13e4a827de..1ffa4eb9c34f 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -68,15 +68,11 @@ ENTRY(cpu_arm1022_proc_init) * cpu_arm1022_proc_fin() */ ENTRY(cpu_arm1022_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1022_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1022_reset(loc) diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 636672a29c6d..5697c34b95b0 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -68,15 +68,11 @@ ENTRY(cpu_arm1026_proc_init) * cpu_arm1026_proc_fin() */ ENTRY(cpu_arm1026_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm1026_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm1026_reset(loc) diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 795dc615f43b..64e0b327c7c5 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -184,8 +184,6 @@ ENTRY(cpu_arm7_proc_init) ENTRY(cpu_arm6_proc_fin) ENTRY(cpu_arm7_proc_fin) - mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, r0 mov r0, #0x31 @ ....S..DP...M mcr p15, 0, r0, c1, c0, 0 @ disable caches mov pc, lr diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 0b62de244666..9d96824134fc 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -54,15 +54,11 @@ ENTRY(cpu_arm720_proc_init) mov pc, lr ENTRY(cpu_arm720_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mcr p15, 0, r1, c7, c7, 0 @ invalidate cache - ldmfd sp!, {pc} + mov pc, lr /* * Function: arm720_proc_do_idle(void) diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 01860cdeb2ec..6c1a9ab059ae 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -36,15 +36,11 @@ ENTRY(cpu_arm740_switch_mm) * cpu_arm740_proc_fin() */ ENTRY(cpu_arm740_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x3f000000 @ bank/f/lock/s bic r0, r0, #0x0000000c @ w-buffer/cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - mcr p15, 0, r0, c7, c0, 0 @ invalidate cache - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm740_reset(loc) diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 1201b9863829..6a850dbba22e 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -36,8 +36,6 @@ ENTRY(cpu_arm7tdmi_switch_mm) * cpu_arm7tdmi_proc_fin() */ ENTRY(cpu_arm7tdmi_proc_fin) - mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, r0 mov pc, lr /* diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 8be81992645d..86f80aa56216 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -69,19 +69,11 @@ ENTRY(cpu_arm920_proc_init) * cpu_arm920_proc_fin() */ ENTRY(cpu_arm920_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - bl arm920_flush_kern_cache_all -#else - bl v4wt_flush_kern_cache_all -#endif mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm920_reset(loc) diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index c0ff8e4b1074..f76ce9b62883 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -71,19 +71,11 @@ ENTRY(cpu_arm922_proc_init) * cpu_arm922_proc_fin() */ ENTRY(cpu_arm922_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip -#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH - bl arm922_flush_kern_cache_all -#else - bl v4wt_flush_kern_cache_all -#endif mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm922_reset(loc) diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 3c6cffe400f6..657bd3f7c153 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -92,15 +92,11 @@ ENTRY(cpu_arm925_proc_init) * cpu_arm925_proc_fin() */ ENTRY(cpu_arm925_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm925_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm925_reset(loc) diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 75b707c9cce1..73f1f3c68910 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -61,15 +61,11 @@ ENTRY(cpu_arm926_proc_init) * cpu_arm926_proc_fin() */ ENTRY(cpu_arm926_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm926_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm926_reset(loc) diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 1af1657819eb..fffb061a45a5 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -37,15 +37,11 @@ ENTRY(cpu_arm940_switch_mm) * cpu_arm940_proc_fin() */ ENTRY(cpu_arm940_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm940_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm940_reset(loc) diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 1664b6aaff79..249a6053760a 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -44,15 +44,11 @@ ENTRY(cpu_arm946_switch_mm) * cpu_arm946_proc_fin() */ ENTRY(cpu_arm946_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl arm946_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_arm946_reset(loc) diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 28545c29dbcd..db475667fac2 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -36,8 +36,6 @@ ENTRY(cpu_arm9tdmi_switch_mm) * cpu_arm9tdmi_proc_fin() */ ENTRY(cpu_arm9tdmi_proc_fin) - mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, r0 mov pc, lr /* diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 08f5ac237ad4..7803fdf70029 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -39,17 +39,13 @@ ENTRY(cpu_fa526_proc_init) * cpu_fa526_proc_fin() */ ENTRY(cpu_fa526_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl fa_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches nop nop - ldmfd sp!, {pc} + mov pc, lr /* * cpu_fa526_reset(loc) diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 53e632343849..b304d0104a4e 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -75,11 +75,6 @@ ENTRY(cpu_feroceon_proc_init) * cpu_feroceon_proc_fin() */ ENTRY(cpu_feroceon_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl feroceon_flush_kern_cache_all - #if defined(CONFIG_CACHE_FEROCEON_L2) && \ !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH) mov r0, #0 @@ -91,7 +86,7 @@ ENTRY(cpu_feroceon_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_feroceon_reset(loc) diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index caa31154e7db..5f6892fcc167 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -51,15 +51,11 @@ ENTRY(cpu_mohawk_proc_init) * cpu_mohawk_proc_fin() */ ENTRY(cpu_mohawk_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl mohawk_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...iz........... bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_mohawk_reset(loc) diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 7b706b389906..a201eb04b5e1 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -44,17 +44,13 @@ ENTRY(cpu_sa110_proc_init) * cpu_sa110_proc_fin() */ ENTRY(cpu_sa110_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl v4wb_flush_kern_cache_all @ clean caches -1: mov r0, #0 + mov r0, #0 mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_sa110_reset(loc) diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 5c47760c2064..7ddc4805bf97 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -55,16 +55,12 @@ ENTRY(cpu_sa1100_proc_init) * - Clean and turn off caches. */ ENTRY(cpu_sa1100_proc_fin) - stmfd sp!, {lr} - mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, ip - bl v4wb_flush_kern_cache_all mcr p15, 0, ip, c15, c2, 2 @ Disable clock switching mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_sa1100_reset(loc) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 7a5337ed7d68..22aac8515196 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -42,14 +42,11 @@ ENTRY(cpu_v6_proc_init) mov pc, lr ENTRY(cpu_v6_proc_fin) - stmfd sp!, {lr} - cpsid if @ disable interrupts - bl v6_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr /* * cpu_v6_reset(loc) @@ -239,7 +236,8 @@ __v6_proc_info: b __v6_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA + /* See also feat_v6_fixup() for HWCAP_TLS */ + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS .long cpu_v6_name .long v6_processor_functions .long v6wbi_tlb_fns @@ -262,7 +260,7 @@ __pj4_v6_proc_info: b __v6_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS .long cpu_pj4_name .long v6_processor_functions .long v6wbi_tlb_fns diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7aaf88a3b7aa..6a8506d99ee9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -45,14 +45,11 @@ ENTRY(cpu_v7_proc_init) ENDPROC(cpu_v7_proc_init) ENTRY(cpu_v7_proc_fin) - stmfd sp!, {lr} - cpsid if @ disable interrupts - bl v7_flush_kern_cache_all mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldmfd sp!, {pc} + mov pc, lr ENDPROC(cpu_v7_proc_fin) /* @@ -344,7 +341,7 @@ __v7_proc_info: b __v7_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS .long cpu_v7_name .long v7_processor_functions .long v7wbi_tlb_fns diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index e5797f1c1db7..361a51e49030 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -90,15 +90,11 @@ ENTRY(cpu_xsc3_proc_init) * cpu_xsc3_proc_fin() */ ENTRY(cpu_xsc3_proc_fin) - str lr, [sp, #-4]! - mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE - msr cpsr_c, r0 - bl xsc3_flush_kern_cache_all @ clean caches mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldr pc, [sp], #4 + mov pc, lr /* * cpu_xsc3_reset(loc) diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 63037e2162f2..14075979bcba 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -124,15 +124,11 @@ ENTRY(cpu_xscale_proc_init) * cpu_xscale_proc_fin() */ ENTRY(cpu_xscale_proc_fin) - str lr, [sp, #-4]! - mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE - msr cpsr_c, r0 - bl xscale_flush_kern_cache_all @ clean caches mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - ldr pc, [sp], #4 + mov pc, lr /* * cpu_xscale_reset(loc) diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c index 19e09bdb1b8a..935993e1b1ef 100644 --- a/arch/arm/mm/vmregion.c +++ b/arch/arm/mm/vmregion.c @@ -35,7 +35,8 @@ */ struct arm_vmregion * -arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp) +arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, + size_t size, gfp_t gfp) { unsigned long addr = head->vm_start, end = head->vm_end - size; unsigned long flags; @@ -58,7 +59,7 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp) goto nospc; if ((addr + size) <= c->vm_start) goto found; - addr = c->vm_end; + addr = ALIGN(c->vm_end, align); if (addr > end) goto nospc; } diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index 6b2cdbdf3a85..15e9f044db9f 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -21,7 +21,7 @@ struct arm_vmregion { int vm_active; }; -struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t); +struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t); struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long); struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long); void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *); diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index ce31f316ac75..43f2b158237c 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -359,7 +359,7 @@ static void __init iop3xx_atu_debug(void) DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD); DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR); - hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort"); + hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort"); } /* for platforms that might be host-bus-adapters */ diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 6c8a02ad98e3..85d3e55ca4a9 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -29,6 +29,11 @@ #include <mach/time.h> /* + * Minimum clocksource/clockevent timer range in seconds + */ +#define IOP_MIN_RANGE 4 + +/* * IOP clocksource (free-running timer 1). */ static cycle_t iop_clocksource_read(struct clocksource *unused) @@ -44,27 +49,6 @@ static struct clocksource iop_clocksource = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz) -{ - u64 temp; - u32 shift; - - /* Find shift and mult values for hz. */ - shift = 32; - do { - temp = (u64) NSEC_PER_SEC << shift; - do_div(temp, hz); - if ((temp >> 32) == 0) - break; - } while (--shift != 0); - - cs->shift = shift; - cs->mult = (u32) temp; - - printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n", - cs->name, cs->shift, cs->mult); -} - /* * IOP sched_clock() implementation via its clocksource. */ @@ -130,27 +114,6 @@ static struct clock_event_device iop_clockevent = { .set_mode = iop_set_mode, }; -static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz) -{ - u64 temp; - u32 shift; - - /* Find shift and mult values for hz. */ - shift = 32; - do { - temp = (u64) hz << shift; - do_div(temp, NSEC_PER_SEC); - if ((temp >> 32) == 0) - break; - } while (--shift != 0); - - ce->shift = shift; - ce->mult = (u32) temp; - - printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n", - ce->name, ce->shift, ce->mult); -} - static irqreturn_t iop_timer_interrupt(int irq, void *dev_id) { @@ -190,7 +153,8 @@ void __init iop_init_time(unsigned long tick_rate) */ write_tmr0(timer_ctl & ~IOP_TMR_EN); setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq); - iop_clockevent_set_hz(&iop_clockevent, tick_rate); + clockevents_calc_mult_shift(&iop_clockevent, + tick_rate, IOP_MIN_RANGE); iop_clockevent.max_delta_ns = clockevent_delta2ns(0xfffffffe, &iop_clockevent); iop_clockevent.min_delta_ns = @@ -207,6 +171,7 @@ void __init iop_init_time(unsigned long tick_rate) write_trr1(0xffffffff); write_tcr1(0xffffffff); write_tmr1(timer_ctl); - iop_clocksource_set_hz(&iop_clocksource, tick_rate); + clocksource_calc_mult_shift(&iop_clocksource, tick_rate, + IOP_MIN_RANGE); clocksource_register(&iop_clocksource); } diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c new file mode 100644 index 000000000000..639c54a07992 --- /dev/null +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -0,0 +1,202 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> + +#include <mach/hardware.h> + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR(n) (n + 0x0) +/* External UART */ +#define UARTA_BASE_ADDR(n) (n + 0x8000) +#define UARTB_BASE_ADDR(n) (n + 0x10000) + +#define BOARD_IO_ADDR(n) (n + 0x20000) +/* LED switchs */ +#define LED_SWITCH_REG 0x00 +/* buttons */ +#define SWITCH_BUTTONS_REG 0x08 +/* status, interrupt */ +#define INTR_STATUS_REG 0x10 +#define INTR_MASK_REG 0x38 +#define INTR_RESET_REG 0x20 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER1_REG 0x40 +#define MAGIC_NUMBER2_REG 0x48 +/* CPLD code version */ +#define CPLD_CODE_VER_REG 0x50 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER3_REG 0x58 +/* module reset register*/ +#define MODULE_RESET_REG 0x60 +/* CPU ID and Personality ID */ +#define MCU_BOARD_ID_REG 0x68 + +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_INTERNAL_IRQS) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_MAX_EXP_IO_LINES 16 + +/* interrupts like external uart , external ethernet etc*/ +#define EXPIO_INT_ENET (MXC_BOARD_IRQ_START + 0) +#define EXPIO_INT_XUART_A (MXC_BOARD_IRQ_START + 1) +#define EXPIO_INT_XUART_B (MXC_BOARD_IRQ_START + 2) +#define EXPIO_INT_BUTTON_A (MXC_BOARD_IRQ_START + 3) +#define EXPIO_INT_BUTTON_B (MXC_BOARD_IRQ_START + 4) + +static void __iomem *brd_io; +static void expio_ack_irq(u32 irq); + +static struct resource smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + } , { + .start = EXPIO_INT_ENET, + .end = EXPIO_INT_ENET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc_lan9217_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc911x_config, + }, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; + +static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 imr_val; + u32 int_valid; + u32 expio_irq; + + desc->chip->mask(irq); /* irq = gpio irq number */ + + imr_val = __raw_readw(brd_io + INTR_MASK_REG); + int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + + expio_irq = MXC_BOARD_IRQ_START; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + struct irq_desc *d; + if ((int_valid & 1) == 0) + continue; + d = irq_desc + expio_irq; + if (unlikely(!(d->handle_irq))) + pr_err("\nEXPIO irq: %d unhandled\n", expio_irq); + else + d->handle_irq(expio_irq, d); + } + + desc->chip->ack(irq); + desc->chip->unmask(irq); +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * Irq is an expio virtual irq number + */ +static void expio_mask_irq(u32 irq) +{ + u16 reg; + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg |= (1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static void expio_ack_irq(u32 irq) +{ + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + __raw_writew(1 << expio, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + expio_mask_irq(irq); +} + +static void expio_unmask_irq(u32 irq) +{ + u16 reg; + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg &= ~(1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .ack = expio_ack_irq, + .mask = expio_mask_irq, + .unmask = expio_unmask_irq, +}; + +int __init mxc_expio_init(u32 base, u32 p_irq) +{ + int i; + + brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); + if (brd_io == NULL) + return -ENOMEM; + + if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + pr_info("3-Stack Debug board not detected\n"); + iounmap(brd_io); + brd_io = NULL; + return -ENODEV; + } + + pr_info("3-Stack Debug board detected, rev = 0x%04X\n", + readw(brd_io + CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq"); + gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq)); + + /* disable the interrupt and clear the status */ + __raw_writew(0, brd_io + INTR_MASK_REG); + __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + __raw_writew(0x1F, brd_io + INTR_MASK_REG); + for (i = MXC_EXP_IO_BASE; + i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) { + set_irq_chip(i, &expio_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + set_irq_type(p_irq, IRQF_TRIGGER_LOW); + set_irq_chained_handler(p_irq, mxc_expio_irq_handler); + + /* Register Lan device on the debugboard */ + smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); + smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; + platform_device_register(&smsc_lan9217_device); + + return 0; +} diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 7f7ad6f289bd..0527e65318f4 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -1,5 +1,7 @@ if ARCH_MXC +source "arch/arm/plat-mxc/devices/Kconfig" + menu "Freescale MXC Implementations" choice @@ -8,15 +10,12 @@ choice config ARCH_MX1 bool "MX1-based" - select CPU_ARM920T - select IMX_HAVE_IOMUX_V1 + select SOC_IMX1 help This enables support for systems based on the Freescale i.MX1 family config ARCH_MX2 bool "MX2-based" - select CPU_ARM926T - select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX2 family @@ -25,6 +24,7 @@ config ARCH_MX25 select CPU_ARM926T select ARCH_MXC_IOMUX_V3 select HAVE_FB_IMX + select ARCH_MXC_AUDMUX_V2 help This enables support for systems based on the Freescale i.MX25 family @@ -48,8 +48,7 @@ config ARCH_MX5 endchoice -source "arch/arm/mach-mx1/Kconfig" -source "arch/arm/mach-mx2/Kconfig" +source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" source "arch/arm/mach-mxc91231/Kconfig" @@ -81,6 +80,17 @@ config MXC_PWM help Enable support for the i.MX PWM controller(s). +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + config MXC_ULPI bool diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 895bc3c5e0c0..78d405ed8616 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -8,8 +8,6 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o) obj-$(CONFIG_MXC_TZIC) += tzic.o -obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o -obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o @@ -17,7 +15,10 @@ obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o +obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif + +obj-y += devices/ diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c index b62917ca3f95..1180bef7664b 100644 --- a/arch/arm/plat-mxc/audmux-v1.c +++ b/arch/arm/plat-mxc/audmux-v1.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index 0c2cc5cd4d83..f9e7cdbd0005 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> @@ -191,6 +187,7 @@ static int mxc_audmux_v2_init(void) { int ret; +#if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); @@ -204,7 +201,19 @@ static int mxc_audmux_v2_init(void) } audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); } - +#endif +#if defined(CONFIG_ARCH_MX25) + if (cpu_is_mx25()) { + audmux_clk = clk_get(NULL, "audmux"); + if (IS_ERR(audmux_clk)) { + ret = PTR_ERR(audmux_clk); + printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, + ret); + return ret; + } + audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR); + } +#endif audmux_debugfs_init(); return 0; diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 323ff8ccc877..2ed3ab173add 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -52,13 +52,14 @@ static void __clk_disable(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) return; - - __clk_disable(clk->parent); - __clk_disable(clk->secondary); - WARN_ON(!clk->usecount); - if (!(--clk->usecount) && clk->disable) - clk->disable(clk); + + if (!(--clk->usecount)) { + if (clk->disable) + clk->disable(clk); + __clk_disable(clk->parent); + __clk_disable(clk->secondary); + } } static int __clk_enable(struct clk *clk) @@ -66,12 +67,13 @@ static int __clk_enable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - __clk_enable(clk->parent); - __clk_enable(clk->secondary); - - if (clk->usecount++ == 0 && clk->enable) - clk->enable(clk); + if (clk->usecount++ == 0) { + __clk_enable(clk->parent); + __clk_enable(clk->secondary); + if (clk->enable) + clk->enable(clk); + } return 0; } @@ -160,17 +162,28 @@ EXPORT_SYMBOL(clk_set_rate); int clk_set_parent(struct clk *clk, struct clk *parent) { int ret = -EINVAL; + struct clk *old; if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent) || clk->set_parent == NULL) return ret; + if (clk->usecount) + clk_enable(parent); + mutex_lock(&clocks_mutex); ret = clk->set_parent(clk, parent); - if (ret == 0) + if (ret == 0) { + old = clk->parent; clk->parent = parent; + } else { + old = parent; + } mutex_unlock(&clocks_mutex); + if (clk->usecount) + clk_disable(old); + return ret; } EXPORT_SYMBOL(clk_set_parent); diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index 56f2fb5cc456..735776d84956 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <mach/common.h> @@ -35,3 +36,35 @@ int __init mxc_register_device(struct platform_device *pdev, void *data) return ret; } +struct platform_device *__init imx_add_platform_device(const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data) +{ + int ret = -ENOMEM; + struct platform_device *pdev; + + pdev = platform_device_alloc(name, id); + if (!pdev) + goto err; + + if (res) { + ret = platform_device_add_resources(pdev, res, num_resources); + if (ret) + goto err; + } + + if (data) { + ret = platform_device_add_data(pdev, data, size_data); + if (ret) + goto err; + } + + ret = platform_device_add(pdev); + if (ret) { +err: + platform_device_put(pdev); + return ERR_PTR(ret); + } + + return pdev; +} diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig new file mode 100644 index 000000000000..9ab784b776f9 --- /dev/null +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -0,0 +1,15 @@ +config IMX_HAVE_PLATFORM_FLEXCAN + select HAVE_CAN_FLEXCAN + bool + +config IMX_HAVE_PLATFORM_IMX_I2C + bool + +config IMX_HAVE_PLATFORM_IMX_UART + bool + +config IMX_HAVE_PLATFORM_MXC_NAND + bool + +config IMX_HAVE_PLATFORM_SPI_IMX + bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile new file mode 100644 index 000000000000..347da5161f7e --- /dev/null +++ b/arch/arm/plat-mxc/devices/Makefile @@ -0,0 +1,8 @@ +ifdef CONFIG_CAN_FLEXCAN +# the ifdef can be removed once the flexcan driver has been merged +obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +endif +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c new file mode 100644 index 000000000000..5e97a01f14f3 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-flexcan.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_flexcan(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct flexcan_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("flexcan", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c new file mode 100644 index 000000000000..d0af9f7d8aed --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_imx_i2c(int id, + resource_size_t iobase, resource_size_t iosize, int irq, + const struct imxi2c_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c new file mode 100644 index 000000000000..fa3dff1433e8 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_imx_uart_3irq(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irqrx, resource_size_t irqtx, + resource_size_t irqrts, + const struct imxuart_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irqrx, + .end = irqrx, + .flags = IORESOURCE_IRQ, + }, { + .start = irqtx, + .end = irqtx, + .flags = IORESOURCE_IRQ, + }, { + .start = irqrts, + .end = irqrx, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} + +struct platform_device *__init imx_add_imx_uart_1irq(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct imxuart_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c new file mode 100644 index 000000000000..1c286418d123 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/devices-common.h> + +static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata, + resource_size_t iosize) +{ + static int id = 0; + + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} + +struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata) +{ + return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K); +} + +struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata) +{ + return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K); +} diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c new file mode 100644 index 000000000000..2831a6d3eb4b --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_spi_imx(int id, + resource_size_t iobase, resource_size_t iosize, int irq, + const struct spi_imx_master *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 2a8646173c2f..35a064ff02ba 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -11,10 +11,6 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/platform_device.h> @@ -73,7 +69,51 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) { unsigned int v; -#ifdef CONFIG_ARCH_MX3 +#if defined(CONFIG_ARCH_MX25) + if (cpu_is_mx25()) { + v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_OTG_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | + MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_H1_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } +#endif /* CONFIG_ARCH_MX25 */ +#if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) { v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 71437c61cfd7..57ec4a896a5d 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -214,13 +214,16 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, struct mxc_gpio_port *port = container_of(chip, struct mxc_gpio_port, chip); u32 l; + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); l = __raw_readl(port->base + GPIO_GDIR); if (dir) l |= 1 << offset; else l &= ~(1 << offset); __raw_writel(l, port->base + GPIO_GDIR); + spin_unlock_irqrestore(&port->lock, flags); } static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) @@ -229,9 +232,12 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) container_of(chip, struct mxc_gpio_port, chip); void __iomem *reg = port->base + GPIO_DR; u32 l; + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset); __raw_writel(l, reg); + spin_unlock_irqrestore(&port->lock, flags); } static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) @@ -285,6 +291,8 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) port[i].chip.base = i * 32; port[i].chip.ngpio = 32; + spin_lock_init(&port[i].lock); + /* its a serious configuration bug when it fails */ BUG_ON( gpiochip_add(&port[i].chip) < 0 ); @@ -292,6 +300,12 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) /* setup one handler for each entry */ set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); set_irq_data(port[i].irq, &port[i]); + if (port[i].irq_high) { + /* setup handler for GPIO 16 to 31 */ + set_irq_chained_handler(port[i].irq_high, + mx3_gpio_irq_handler); + set_irq_data(port[i].irq_high, &port[i]); + } } } diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h new file mode 100644 index 000000000000..a384fdd49c62 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h @@ -0,0 +1,18 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_3DS_DB_H__ +#define __ASM_ARCH_MXC_3DS_DB_H__ + +extern int __init mxc_expio_init(u32 base, u32 p_irq); + +#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h deleted file mode 100644 index 0376c133c9f4..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>. - * All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ -#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ - -#endif diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h deleted file mode 100644 index 93cc66f104c7..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H -#define __ARM_ARCH_BOARD_KZM_ARM11_H - -/* - * KZM-ARM11-01 Board Control Registers on FPGA - */ -#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) -#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) -#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) -#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) -#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) -#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) -#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) -#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) - -/* - * External UART for touch panel on FPGA - */ -#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) - -#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */ - diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h deleted file mode 100644 index 0cf4fa29510c..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__ - -/* - * Memory-mapped I/O on MX21ADS base board - */ -#define MX21ADS_MMIO_BASE_ADDR 0xF5000000 -#define MX21ADS_MMIO_SIZE SZ_16M - -#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ - (MX21ADS_MMIO_BASE_ADDR + (offset)) - -#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) -#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) -#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) -#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) - -/* MX21ADS_IO_REG bit definitions */ -#define MX21ADS_IO_SD_WP 0x0001 /* read */ -#define MX21ADS_IO_TP6 0x0001 /* write */ -#define MX21ADS_IO_SW_SEL 0x0002 /* read */ -#define MX21ADS_IO_TP7 0x0002 /* write */ -#define MX21ADS_IO_RESET_E_UART 0x0004 -#define MX21ADS_IO_RESET_BASE 0x0008 -#define MX21ADS_IO_CSI_CTL2 0x0010 -#define MX21ADS_IO_CSI_CTL1 0x0020 -#define MX21ADS_IO_CSI_CTL0 0x0040 -#define MX21ADS_IO_UART1_EN 0x0080 -#define MX21ADS_IO_UART4_EN 0x0100 -#define MX21ADS_IO_LCDON 0x0200 -#define MX21ADS_IO_IRDA_EN 0x0400 -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 -#define MX21ADS_IO_IRDA_MD0_B 0x1000 -#define MX21ADS_IO_IRDA_MD1 0x2000 -#define MX21ADS_IO_LED4_ON 0x4000 -#define MX21ADS_IO_LED3_ON 0x8000 - -#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h deleted file mode 100644 index 7776d230327f..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ /dev/null @@ -1,344 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__ - -/* external interrupt multiplexer */ -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) - -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -/* - * @name Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M - -/* - * PBC Controller parameters - */ - -/* - * Base address of PBC controller, CS4 - */ -#define PBC_BASE_ADDRESS 0xf4300000 -#define PBC_REG_ADDR(offset) (void __force __iomem *) \ - (PBC_BASE_ADDRESS + (offset)) - -/* - * PBC Interupt name definitions - */ -#define PBC_GPIO1_0 0 -#define PBC_GPIO1_1 1 -#define PBC_GPIO1_2 2 -#define PBC_GPIO1_3 3 -#define PBC_GPIO1_4 4 -#define PBC_GPIO1_5 5 - -#define PBC_INTR_MAX_NUM 6 -#define PBC_INTR_SHARED_MAX_NUM 8 - -/* When the PBC address connection is fixed in h/w, defined as 1 */ -#define PBC_ADDR_SH 0 - -/* Offsets for the PBC Controller register */ -/* - * PBC Board version register offset - */ -#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 set address. - */ -#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 clear address. - */ -#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) -/* - * PBC Board control register 2 set address. - */ -#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH) -/* - * PBC Board control register 2 clear address. - */ -#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 clear address. - */ -#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH) -/* - * PBC Board control register 4 clear address. - */ -#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH) -/*PBC_ADDR_SH - * PBC Board status register 1. - */ -#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH) -/* - * PBC Board interrupt status register. - */ -#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH) -/* - * PBC Board interrupt current status register. - */ -#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register set address. - */ -#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register clear address. - */ -#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH) -/* - * External UART A. - */ -#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Status. - */ -#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Set. - */ -#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Clear. - */ -#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH) -/* - * Ethernet Controller IO base address. - */ -#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH) -/* - * Ethernet Controller Memory base address. - */ -#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH) -/* - * Ethernet Controller DMA base address. - */ -#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH) - -/* PBC Board Version Register bit definition */ -#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */ -#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */ - -/* PBC Board Control Register 1 bit definitions */ -#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */ -#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */ -#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */ -#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */ -#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ - -/* PBC Board Control Register 2 bit definitions */ -#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */ -#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */ -#define PBC_BCTRL2_ATAFEC_EN 0X0010 -#define PBC_BCTRL2_ATAFEC_SEL 0X0020 -#define PBC_BCTRL2_ATA_EN 0X0040 -#define PBC_BCTRL2_IRDA_SD 0X0080 -#define PBC_BCTRL2_IRDA_EN 0X0100 -#define PBC_BCTRL2_CCTL10 0X0200 -#define PBC_BCTRL2_CCTL11 0X0400 - -/* PBC Board Control Register 3 bit definitions */ -#define PBC_BCTRL3_HSH_EN 0X0020 -#define PBC_BCTRL3_FSH_MOD 0X0040 -#define PBC_BCTRL3_OTG_HS_EN 0X0080 -#define PBC_BCTRL3_OTG_VBUS_EN 0X0100 -#define PBC_BCTRL3_FSH_VBUS_EN 0X0200 -#define PBC_BCTRL3_USB_OTG_ON 0X0800 -#define PBC_BCTRL3_USB_FSH_ON 0X1000 - -/* PBC Board Control Register 4 bit definitions */ -#define PBC_BCTRL4_REGEN_SEL 0X0001 -#define PBC_BCTRL4_USER_OFF 0X0002 -#define PBC_BCTRL4_VIB_EN 0X0004 -#define PBC_BCTRL4_PWRGT1_EN 0X0008 -#define PBC_BCTRL4_PWRGT2_EN 0X0010 -#define PBC_BCTRL4_STDBY_PRI 0X0020 - -#ifndef __ASSEMBLY__ -/* - * Enumerations for SD cards and memory stick card. This corresponds to - * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN. - */ -enum mxc_card_no { - MXC_CARD_SD2 = 0, - MXC_CARD_SD3, - MXC_CARD_MS, - MXC_CARD_SD1, - MXC_CARD_MIN = MXC_CARD_SD2, - MXC_CARD_MAX = MXC_CARD_SD1, -}; -#endif - -#define MXC_CPLD_VER_1_50 0x01 - -/* - * PBC BSTAT Register bit definitions - */ -#define PBC_BSTAT_PRI_INT 0X0001 -#define PBC_BSTAT_USB_BYP 0X0002 -#define PBC_BSTAT_ATA_IOCS16 0X0004 -#define PBC_BSTAT_ATA_CBLID 0X0008 -#define PBC_BSTAT_ATA_DASP 0X0010 -#define PBC_BSTAT_PWR_RDY 0X0020 -#define PBC_BSTAT_SD3_WP 0X0100 -#define PBC_BSTAT_SD2_WP 0X0200 -#define PBC_BSTAT_SD1_WP 0X0400 -#define PBC_BSTAT_SD3_DET 0X0800 -#define PBC_BSTAT_SD2_DET 0X1000 -#define PBC_BSTAT_SD1_DET 0X2000 -#define PBC_BSTAT_MS_DET 0X4000 -#define PBC_BSTAT_SD3_DET_BIT 11 -#define PBC_BSTAT_SD2_DET_BIT 12 -#define PBC_BSTAT_SD1_DET_BIT 13 -#define PBC_BSTAT_MS_DET_BIT 14 -#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \ - ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \ - ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \ - ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \ - 0x0)))) - -/* - * PBC UART Control Register bit definitions - */ -#define PBC_UCTRL_DCE_DCD 0X0001 -#define PBC_UCTRL_DCE_DSR 0X0002 -#define PBC_UCTRL_DCE_RI 0X0004 -#define PBC_UCTRL_DTE_DTR 0X0100 - -/* - * PBC UART Status Register bit definitions - */ -#define PBC_USTAT_DTE_DCD 0X0001 -#define PBC_USTAT_DTE_DSR 0X0002 -#define PBC_USTAT_DTE_RI 0X0004 -#define PBC_USTAT_DCE_DTR 0X0100 - -/* - * PBC Interupt mask register bit definitions - */ -#define PBC_INTR_SD3_R_EN_BIT 4 -#define PBC_INTR_SD2_R_EN_BIT 0 -#define PBC_INTR_SD1_R_EN_BIT 6 -#define PBC_INTR_MS_R_EN_BIT 5 -#define PBC_INTR_SD3_EN_BIT 13 -#define PBC_INTR_SD2_EN_BIT 12 -#define PBC_INTR_MS_EN_BIT 14 -#define PBC_INTR_SD1_EN_BIT 15 - -#define PBC_INTR_SD2_R_EN 0x0001 -#define PBC_INTR_LOW_BAT 0X0002 -#define PBC_INTR_OTG_FSOVER 0X0004 -#define PBC_INTR_FSH_OVER 0X0008 -#define PBC_INTR_SD3_R_EN 0x0010 -#define PBC_INTR_MS_R_EN 0x0020 -#define PBC_INTR_SD1_R_EN 0x0040 -#define PBC_INTR_FEC_INT 0X0080 -#define PBC_INTR_ENET_INT 0X0100 -#define PBC_INTR_OTGFS_INT 0X0200 -#define PBC_INTR_XUART_INT 0X0400 -#define PBC_INTR_CCTL12 0X0800 -#define PBC_INTR_SD2_EN 0x1000 -#define PBC_INTR_SD3_EN 0x2000 -#define PBC_INTR_MS_EN 0x4000 -#define PBC_INTR_SD1_EN 0x8000 - - - -/* For interrupts like xuart, enet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN) -#define MXC_MAX_EXP_IO_LINES 16 - -/* - * This corresponds to PBC_INTMASK_SET_REG at offset 0x38. - * - */ -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15) - -/* - * This is System IRQ used by CS8900A for interrupt generation - * taken from platform.h - */ -#define CS8900AIRQ EXPIO_INT_ENET_INT -/* This is I/O Base address used to access registers of CS8900A on MXC ADS */ -#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300) - -#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT) - -/* -* This is used to detect if the CPLD version is for mx27 evb board rev-a -*/ -#define PBC_CPLD_VERSION_IS_REVA() \ - ((__raw_readw(PBC_VERSION_REG) & \ - (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\ - == 0) - -/* This is used to active or inactive ata signal in CPLD . - * It is dependent with hardware - */ -#define PBC_ATA_SIGNAL_ACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_CLEAR_REG) - -#define PBC_ATA_SIGNAL_INACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_SET_REG) - -#define MXC_BD_LED1 (1 << 5) -#define MXC_BD_LED2 (1 << 6) -#define MXC_BD_LED_ON(led) \ - __raw_writew(led, PBC_BCTRL1_SET_REG) -#define MXC_BD_LED_OFF(led) \ - __raw_writew(led, PBC_BCTRL1_CLEAR_REG) - -/* to determine the correct external crystal reference */ -#define CKIH_27MHZ_BIT_SET (1 << 3) - -#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h deleted file mode 100644 index ea87551d2736..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__ -#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h deleted file mode 100644 index fec1bcfa9164..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h deleted file mode 100644 index da92933a233b..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ - -/* Definitions for components on the Debug board */ - -/* Base address of CPLD controller on the Debug board */ -#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR) - -/* LAN9217 ethernet base address */ -#define LAN9217_BASE_ADDR CS5_BASE_ADDR - -/* CPLD config and interrupt base address */ -#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000) - -/* LED switchs */ -#define CPLD_LED_REG (CPLD_ADDR + 0x00) -/* buttons */ -#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08) -/* status, interrupt */ -#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10) -#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38) -#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20) -/* magic word for debug CPLD */ -#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40) -#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48) -/* CPLD code version */ -#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50) -/* magic word for debug CPLD */ -#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58) -/* module reset register */ -#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60) -/* CPU ID and Personality ID */ -#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68) - -/* CPLD IRQ line for external uart, external ethernet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4) - -#define MXC_MAX_EXP_IO_LINES 16 - -#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h deleted file mode 100644 index 095a199591c6..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ - -#include <mach/hardware.h> - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT -/* Offsets for the PBC Controller register */ - -/* PBC Board status register offset */ -#define PBC_BSTAT 0x000002 - -/* PBC Board control register 1 set address */ -#define PBC_BCTRL1_SET 0x000004 - -/* PBC Board control register 1 clear address */ -#define PBC_BCTRL1_CLEAR 0x000006 - -/* PBC Board control register 2 set address */ -#define PBC_BCTRL2_SET 0x000008 - -/* PBC Board control register 2 clear address */ -#define PBC_BCTRL2_CLEAR 0x00000A - -/* PBC Board control register 3 set address */ -#define PBC_BCTRL3_SET 0x00000C - -/* PBC Board control register 3 clear address */ -#define PBC_BCTRL3_CLEAR 0x00000E - -/* PBC Board control register 4 set address */ -#define PBC_BCTRL4_SET 0x000010 - -/* PBC Board control register 4 clear address */ -#define PBC_BCTRL4_CLEAR 0x000012 - -/* PBC Board status register 1 */ -#define PBC_BSTAT1 0x000014 - -/* PBC Board interrupt status register */ -#define PBC_INTSTATUS 0x000016 - -/* PBC Board interrupt current status register */ -#define PBC_INTCURR_STATUS 0x000018 - -/* PBC Interrupt mask register set address */ -#define PBC_INTMASK_SET 0x00001A - -/* PBC Interrupt mask register clear address */ -#define PBC_INTMASK_CLEAR 0x00001C - -/* External UART A */ -#define PBC_SC16C652_UARTA 0x010000 - -/* External UART B */ -#define PBC_SC16C652_UARTB 0x010010 - -/* Ethernet Controller IO base address */ -#define PBC_CS8900A_IOBASE 0x020000 - -/* Ethernet Controller Memory base address */ -#define PBC_CS8900A_MEMBASE 0x021000 - -/* Ethernet Controller DMA base address */ -#define PBC_CS8900A_DMABASE 0x022000 - -/* External chip select 0 */ -#define PBC_XCS0 0x040000 - -/* LCD Display enable */ -#define PBC_LCD_EN_B 0x060000 - -/* Code test debug enable */ -#define PBC_CODE_B 0x070000 - -/* PSRAM memory select */ -#define PBC_PSRAM_B 0x5000000 - -#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) -#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) -#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) -#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) - -#define MXC_MAX_EXP_IO_LINES 16 - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h index eb5a5024622e..0df71bfefbb1 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h @@ -31,7 +31,7 @@ enum mx31lilly_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31lilly_db_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index 2b2da0367578..c1ad0ae807cc 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -32,7 +32,7 @@ enum mx31lite_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31lite_db_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index 36ff3cedee1a..de14543891cf 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -31,7 +31,7 @@ enum mx31moboard_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31moboard_devboard_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h index 410f9786ed22..6f371e35753d 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h @@ -22,7 +22,7 @@ #ifndef __ASSEMBLY__ /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. * TODO: Add your own baseboard init function and call it from * inside pcm038_init(). * diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h deleted file mode 100644 index 6d88c7af4b23..000000000000 --- a/arch/arm/plat-mxc/include/mach/board-qong.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__ -#define __ASM_ARCH_MXC_BOARD_QONG_H__ - -/* NOR FLASH */ -#define QONG_NOR_SIZE (128*1024*1024) - -#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 0b6e11eaeb8c..25606409aabc 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -23,8 +23,8 @@ #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #include <mach/mx25.h> -#define UART_PADDR UART1_BASE_ADDR -#define UART_VADDR MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR) +#define UART_PADDR MX25_UART1_BASE_ADDR +#define UART_VADDR MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR) #endif #ifdef CONFIG_ARCH_MX2 diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h new file mode 100644 index 000000000000..c5f68c587309 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/init.h> + +struct platform_device *imx_add_platform_device(const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data); + +#if defined (CONFIG_CAN_FLEXCAN) || defined (CONFIG_CAN_FLEXCAN_MODULE) +#include <linux/can/platform/flexcan.h> +struct platform_device *__init imx_add_flexcan(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct flexcan_platform_data *pdata); +#else +/* the ifdef can be removed once the flexcan driver has been merged */ +struct flexcan_platform_data; +static inline struct platform_device *__init imx_add_flexcan(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct flexcan_platform_data *pdata) +{ + return NULL; +} +#endif + +#include <mach/i2c.h> +struct platform_device *__init imx_add_imx_i2c(int id, + resource_size_t iobase, resource_size_t iosize, int irq, + const struct imxi2c_platform_data *pdata); + +#include <mach/imx-uart.h> +struct platform_device *__init imx_add_imx_uart_3irq(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irqrx, resource_size_t irqtx, + resource_size_t irqrts, + const struct imxuart_platform_data *pdata); +struct platform_device *__init imx_add_imx_uart_1irq(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct imxuart_platform_data *pdata); + +#include <mach/mxc_nand.h> +struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata); +struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata); + +#include <mach/spi.h> +struct platform_device *__init imx_add_spi_imx(int id, + resource_size_t iobase, resource_size_t iosize, int irq, + const struct spi_imx_master *pdata); diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h index a1fd5830af48..634e3f4c454d 100644 --- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h +++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * Copyright (C) 2010 Eric Benard - eric@eukrea.com * * Based on board-pcm038.h which is : * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) @@ -19,22 +19,29 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ -#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ +#ifndef __MACH_EUKREA_BASEBOARDS_H__ +#define __MACH_EUKREA_BASEBOARDS_H__ #ifndef __ASSEMBLY__ /* * This CPU module needs a baseboard to work. After basic initializing * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from - * inside eukrea_cpuimx27_init(). + * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init() + * eukrea_cpuimx35_init() or eukrea_cpuimx51_init(). * * This example here is for the development board. Refer - * eukrea_mbimx27-baseboard.c + * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25 + * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27 + * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35 + * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 */ +extern void eukrea_mbimx25_baseboard_init(void); extern void eukrea_mbimx27_baseboard_init(void); +extern void eukrea_mbimx35_baseboard_init(void); +extern void eukrea_mbimx51_baseboard_init(void); #endif -#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */ +#endif /* __MACH_EUKREA_BASEBOARDS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index 894d2f87c856..661fbc605759 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -33,9 +33,11 @@ struct mxc_gpio_port { void __iomem *base; int irq; + int irq_high; int virtual_irq_start; struct gpio_chip chip; u32 both_edges; + spinlock_t lock; }; int mxc_gpio_init(struct mxc_gpio_port*, int); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index f39220d1b67a..d7f52c91f82e 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -252,6 +252,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CONTRAST__PWM4_PWMO IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL) #define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL) @@ -371,30 +372,41 @@ #define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE) +#define KPP_CTL_ROW (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) +#define KPP_CTL_COL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + +#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW) #define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW) #define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW) #define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL) #define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW) #define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL) #define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL) +#define MX25_PAD_KPP_COL0__AUD5_TXD IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_KPP_COL1__AUD5_RXD IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL2__UART4_RTS IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_KPP_COL2__AUD5_TXC IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL3__UART4_CTS IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_KPP_COL3__AUD5_TXFS IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index ab0f95d953d0..21bfa46785bb 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -27,8 +27,8 @@ typedef enum iomux_config { IOMUX_CONFIG_ALT5, IOMUX_CONFIG_ALT6, IOMUX_CONFIG_ALT7, - IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ - IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ } iomux_pin_cfg_t; /* Pad control groupings */ @@ -38,6 +38,8 @@ typedef enum iomux_config { PAD_CTL_SRE_FAST) #define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) +#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS) #define MX51_USBH1_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ PAD_CTL_PKE | PAD_CTL_HYS) @@ -46,289 +48,278 @@ typedef enum iomux_config { /* * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> - * If <padname> or <padmode> refers to a GPIO, it is named - * GPIO_<unit>_<num> see also iomux-v3.h + * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * See also iomux-v3.h */ -/* - * FIXME: This was converted using scripts from existing Freescale code to - * this form used upstream. Need to verify the name format. - */ - -/* PAD MUX ALT INPSE PATH PADCTRL */ - -#define MX51_PAD_GPIO_2_0__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_1__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_2__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D21__GPIO_2_5 IOMUX_PAD(0x404, 0x070, IOMUX_CONFIG_ALT1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) - -/* Babbage UART3 */ -#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL) - -#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_GPIO_2_10__EIM_A16 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_11__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_12__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_13__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_14__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_15__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_16__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_17__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_GPIO_2_18__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_19__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_20__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_21__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_22__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_23__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_GPIO_2_24__EIM_OE IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_25__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_26__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_27__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_28__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_29__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_30__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_31__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_GPIO_3_1__EIM_LBA IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_2__EIM_CRE IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_3__NANDF_WE_B IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_4__NANDF_RE_B IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_5__NANDF_ALE IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_6__NANDF_CLE IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_7__NANDF_WP_B IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_8__NANDF_RB0 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_9__NANDF_RB1 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_10__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_11__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_12__GPIO_NAND IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) -/* REVISIT: Not sure of these values - - #define MX51_PAD_GPIO_1___NANDF_RB4 IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL) - #define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL) - #define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL) -*/ -#define MX51_PAD_GPIO_3_14__NANDF_RB6 IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_16__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_17__NANDF_CS1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_18__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_19__NANDF_CS3 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_20__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_21__NANDF_CS5 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_22__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_23__NANDF_CS7 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_25__NANDF_D15 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_26__NANDF_D14 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_27__NANDF_D13 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_28__NANDF_D12 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_29__NANDF_D11 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_30__NANDF_D10 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_31__NANDF_D9 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_0__NANDF_D8 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_1__NANDF_D7 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_2__NANDF_D6 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_3__NANDF_D5 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_5__NANDF_D3 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_6__NANDF_D2 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_7__NANDF_D1 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_8__NANDF_D0 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_12__CSI1_D8 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_13__CSI1_D9 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_9__CSI2_D12 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_10__CSI2_D13 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_11__CSI2_D14 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_12__CSI2_D15 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_11__CSI2_D16 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_12__CSI2_D17 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_11__CSI2_D18 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_12__CSI2_D19 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_13__CSI2_VSYNC IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_14__CSI2_HSYNC IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_16__I2C1_CLK IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_17__I2C1_DAT IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_20__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_21__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_22__CSPI1_MOSI IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_23__CSPI1_MISO IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_24__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_25__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_26__CSPI1_RDY IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_27__CSPI1_SCLK IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) - -/* Babbage UART1 */ -#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) -#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) -#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL) -#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL) - -/* Babbage UART2 */ -#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL) -#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL) - -#define MX51_PAD_GPIO_1_22__UART3_RXD IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_23__UART3_TXD IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_24__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_STP__GPIO_1_27 IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_3__DI1_D0_CS IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_4__DI1_D1_CS IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_19__DISP2_DAT6 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_29__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_30__DISP2_DAT8 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_31__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_0__GPIO1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_1__GPIO1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_2__GPIO1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_3__GPIO1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \ - (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)) -#define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) - -/* EIM */ -#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) +/* PAD MUX ALT INPSE PATH PADCTRL */ +#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D16__GPIO_2_0 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, (4 | IOMUX_CONFIG_SION), \ + 0x09b4, 0, MX51_I2C_PAD_CTRL) +#define MX51_PAD_EIM_D17__GPIO_2_1 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D18__GPIO_2_2 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D19__GPIO_2_3 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, (4 | IOMUX_CONFIG_SION), \ + 0x09b0, 0, MX51_I2C_PAD_CTRL) +#define MX51_PAD_EIM_D20__GPIO_2_4 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D21__GPIO_2_5 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_EIM_D22__GPIO_2_6 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D23__GPIO_2_7 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, 0x0, 0, MX51_UART2_PAD_CTRL) +#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART2_PAD_CTRL) +#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A16__GPIO_2_10 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A17__GPIO_2_11 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A18__GPIO_2_12 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A19__GPIO_2_13 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A20__GPIO_2_14 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A21__GPIO_2_15 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A23__GPIO_2_17 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A24__GPIO_2_18 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A25__GPIO_2_19 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A26__GPIO_2_20 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A27__GPIO_2_21 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0x0FC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_WE_B__GPIO_3_3 IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RE_B__GPIO_3_4 IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_ALE__GPIO_3_5 IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CLE__GPIO_3_6 IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_WP_B__GPIO_3_7 IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D11__GPIO_3_29 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D10__GPIO_3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D9__GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D8__GPIO_4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D7__GPIO_4_1 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D6__GPIO_4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D5__GPIO_4_3 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D4__GPIO_4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D3__GPIO_4_5 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D2__GPIO_4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D1__GPIO_4_7 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D0__GPIO_4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D8__GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D9__GPIO_3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x000, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x000, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x000, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D12__GPIO_4_9 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D13__GPIO_4_10 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D14__GPIO_4_11 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D15__GPIO_4_12 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D16__GPIO_4_11 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D17__GPIO_4_12 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D18__GPIO_4_11 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D19__GPIO_4_12 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_VSYNC__GPIO_4_13 IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_HSYNC__GPIO_4_14 IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15 IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_CLK__GPIO_4_16 IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS1__GPIO_4_25 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, 0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART1_PAD_CTRL) +#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, 0x0, 0, MX51_UART1_PAD_CTRL) +#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART2_PAD_CTRL) +#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, 0, 0x0, 0, MX51_UART2_PAD_CTRL) +#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART3_PAD_CTRL) +#define MX51_PAD_UART3_RXD__GPIO_1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_UART3_TXD__GPIO_1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_OWIRE_LINE__GPIO_1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65C, 0x26C, 2, 0x9f0, 4, MX51_UART3_PAD_CTRL) +#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65C, 0x26C, (3 | IOMUX_CONFIG_SION), \ + 0x09b8, 1, MX51_I2C_PAD_CTRL) +#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, 0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, (3 | IOMUX_CONFIG_SION), \ + 0x09bc, 1, MX51_I2C_PAD_CTRL) +#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_STP__GPIO_1_27 IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT6__GPIO_1_19 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT7__GPIO_1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT8__GPIO_1_30 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT9__GPIO_1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \ + 0x9b8, 3, MX51_I2C_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__I2C2_SDA IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \ + 0x9bc, 3, MX51_I2C_PAD_CTRL) +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) #endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h index 3887f3fe29d4..15d59510f597 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __MACH_IOMUX_MXC91231_H__ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index f2f73d31d5ba..0880a4a1aed1 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -89,6 +89,21 @@ struct pad_desc { #define PAD_CTL_SRE_FAST (1 << 0) #define PAD_CTL_SRE_SLOW (0 << 0) + +#define MX51_NUM_GPIO_PORT 4 + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + /* * setups a single pad in the iomuxer */ diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index c4b40c35a6a1..564ec9dbc93d 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -44,12 +44,12 @@ */ #define CONSISTENT_DMA_SIZE SZ_8M -#elif defined(CONFIG_MX1_VIDEO) +#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT) /* * Increase size of DMA-consistent memory region. * This is required for i.MX camera driver to capture at least four VGA frames. */ #define CONSISTENT_DMA_SIZE SZ_4M -#endif /* CONFIG_MX1_VIDEO */ +#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */ #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h index de2128dada5c..29115f405af9 100644 --- a/arch/arm/plat-mxc/include/mach/mmc.h +++ b/arch/arm/plat-mxc/include/mach/mmc.h @@ -31,6 +31,9 @@ struct imxmmc_platform_data { /* adjust slot voltage */ void (*setpower)(struct device *, unsigned int vdd); + + /* enable card detect using DAT3 */ + int dat3_card_detect; }; #endif diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 5eba7e6785de..641b24618239 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -91,24 +91,24 @@ #define MX1_SIM_DATA_INT 16 #define MX1_RTC_INT 17 #define MX1_RTC_SAMINT 18 -#define MX1_UART2_MINT_PFERR 19 -#define MX1_UART2_MINT_RTS 20 -#define MX1_UART2_MINT_DTR 21 -#define MX1_UART2_MINT_UARTC 22 -#define MX1_UART2_MINT_TX 23 -#define MX1_UART2_MINT_RX 24 -#define MX1_UART1_MINT_PFERR 25 -#define MX1_UART1_MINT_RTS 26 -#define MX1_UART1_MINT_DTR 27 -#define MX1_UART1_MINT_UARTC 28 -#define MX1_UART1_MINT_TX 29 -#define MX1_UART1_MINT_RX 30 +#define MX1_INT_UART2PFERR 19 +#define MX1_INT_UART2RTS 20 +#define MX1_INT_UART2DTR 21 +#define MX1_INT_UART2UARTC 22 +#define MX1_INT_UART2TX 23 +#define MX1_INT_UART2RX 24 +#define MX1_INT_UART1PFERR 25 +#define MX1_INT_UART1RTS 26 +#define MX1_INT_UART1DTR 27 +#define MX1_INT_UART1UARTC 28 +#define MX1_INT_UART1TX 29 +#define MX1_INT_UART1RX 30 #define MX1_VOICE_DAC_INT 31 #define MX1_VOICE_ADC_INT 32 #define MX1_PEN_DATA_INT 33 #define MX1_PWM_INT 34 #define MX1_SDHC_INT 35 -#define MX1_I2C_INT 39 +#define MX1_INT_I2C 39 #define MX1_CSPI_INT 41 #define MX1_SSI_TX_INT 42 #define MX1_SSI_TX_ERR_INT 43 @@ -245,7 +245,7 @@ #define PEN_DATA_INT MX1_PEN_DATA_INT #define PWM_INT MX1_PWM_INT #define SDHC_INT MX1_SDHC_INT -#define I2C_INT MX1_I2C_INT +#define I2C_INT MX1_INT_I2C #define CSPI_INT MX1_CSPI_INT #define SSI_TX_INT MX1_SSI_TX_INT #define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 4eb6e334bda5..4a6f800990f8 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -11,6 +11,12 @@ #define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000 #define MX25_AVIC_SIZE SZ_1M +#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000) +#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000) +#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000) +#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000) +#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000) +#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000) #define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000) #define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000) @@ -27,22 +33,48 @@ IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \ IMX_IO_ADDRESS(x, MX25_AVIC)) +#define MX25_AIPS1_IO_ADDRESS(x) \ + (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT) + #define MX25_UART1_BASE_ADDR 0x43f90000 #define MX25_UART2_BASE_ADDR 0x43f94000 +#define MX25_AUDMUX_BASE_ADDR 0x43fb0000 +#define MX25_UART3_BASE_ADDR 0x5000c000 +#define MX25_UART4_BASE_ADDR 0x50008000 +#define MX25_UART5_BASE_ADDR 0x5002c000 +#define MX25_CSPI3_BASE_ADDR 0x50004000 +#define MX25_CSPI2_BASE_ADDR 0x50010000 #define MX25_FEC_BASE_ADDR 0x50038000 +#define MX25_SSI2_BASE_ADDR 0x50014000 +#define MX25_SSI1_BASE_ADDR 0x50034000 #define MX25_NFC_BASE_ADDR 0xbb000000 #define MX25_DRYICE_BASE_ADDR 0x53ffc000 #define MX25_LCDC_BASE_ADDR 0x53fbc000 +#define MX25_KPP_BASE_ADDR 0x43fa8000 +#define MX25_OTG_BASE_ADDR 0x53ff4000 +#define MX25_CSI_BASE_ADDR 0x53ff8000 -#define MX25_INT_DRYICE 25 -#define MX25_INT_FEC 57 -#define MX25_INT_NANDFC 33 -#define MX25_INT_LCDC 39 - -#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS) -#define UART1_BASE_ADDR MX25_UART1_BASE_ADDR -#define UART2_BASE_ADDR MX25_UART2_BASE_ADDR -#endif +#define MX25_INT_CSPI3 0 +#define MX25_INT_I2C1 3 +#define MX25_INT_I2C2 4 +#define MX25_INT_UART4 5 +#define MX25_INT_I2C3 10 +#define MX25_INT_SSI2 11 +#define MX25_INT_SSI1 12 +#define MX25_INT_CSPI2 13 +#define MX25_INT_CSPI1 14 +#define MX25_INT_CSI 17 +#define MX25_INT_UART3 18 +#define MX25_INT_KPP 24 +#define MX25_INT_DRYICE 25 +#define MX25_INT_UART2 32 +#define MX25_INT_NANDFC 33 +#define MX25_INT_LCDC 39 +#define MX25_INT_UART5 40 +#define MX25_INT_CAN1 43 +#define MX25_INT_CAN2 44 +#define MX25_INT_UART1 45 +#define MX25_INT_FEC 57 #endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index bae9cd75beee..a8ab2e02a8ca 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -48,7 +48,7 @@ #define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000) #define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000) #define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000) -#define MX27_I2C_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) +#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) #define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000) #define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000) #define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000) @@ -150,7 +150,7 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_INT_SDHC3 9 #define MX27_INT_SDHC2 10 #define MX27_INT_SDHC1 11 -#define MX27_INT_I2C 12 +#define MX27_INT_I2C1 12 #define MX27_INT_SSI2 13 #define MX27_INT_SSI1 14 #define MX27_INT_CSPI2 15 diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h new file mode 100644 index 000000000000..3c080a32dbf5 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -0,0 +1,46 @@ +/* + * mx2-cam.h - i.MX27/i.MX25 camera driver header file + * + * Copyright (C) 2003, Intel Corporation + * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de> + * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MX2_CAM_H_ +#define __MACH_MX2_CAM_H_ + +#define MX2_CAMERA_SWAP16 (1 << 0) +#define MX2_CAMERA_EXT_VSYNC (1 << 1) +#define MX2_CAMERA_CCIR (1 << 2) +#define MX2_CAMERA_CCIR_INTERLACE (1 << 3) +#define MX2_CAMERA_HSYNC_HIGH (1 << 4) +#define MX2_CAMERA_GATED_CLOCK (1 << 5) +#define MX2_CAMERA_INV_DATA (1 << 6) +#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) +#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) + +/** + * struct mx2_camera_platform_data - optional platform data for mx2_camera + * @flags: any combination of MX2_CAMERA_* + * @clk: clock rate of the csi block / 2 + */ +struct mx2_camera_platform_data { + unsigned long flags; + unsigned long clk; +}; + +#endif /* __MACH_MX2_CAM_H_ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index fb90e119c2b5..afee3ab9d62e 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -23,7 +23,7 @@ #define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000) #define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000) #define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) -#define MX31_I2C_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) +#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) #define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) #define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) #define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) @@ -145,7 +145,7 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_FIRI 7 #define MX31_INT_MMC_SDHC2 8 #define MX31_INT_MMC_SDHC1 9 -#define MX31_INT_I2C 10 +#define MX31_INT_I2C1 10 #define MX31_INT_SSI2 11 #define MX31_INT_SSI1 12 #define MX31_INT_CSPI2 13 diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index 526a55842ae5..af3038c12e39 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -18,7 +18,7 @@ #define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000) #define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000) #define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000) -#define MX35_I2C_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) +#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) #define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000) #define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000) #define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000) @@ -60,6 +60,8 @@ #define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000) #define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000) #define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000) +#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000) +#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) #define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) #define MX35_OTG_BASE_ADDR 0x53ff4000 @@ -123,7 +125,7 @@ #define MX35_INT_MMC_SDHC1 7 #define MX35_INT_MMC_SDHC2 8 #define MX35_INT_MMC_SDHC3 9 -#define MX35_INT_I2C 10 +#define MX35_INT_I2C1 10 #define MX35_INT_SSI1 11 #define MX35_INT_SSI2 12 #define MX35_INT_CSPI2 13 diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h index 36d7ff27b5e2..f226ee3777e1 100644 --- a/arch/arm/plat-mxc/include/mach/mx3_camera.h +++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _MX3_CAMERA_H_ diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h index 5182b986b785..0ca3101ebf36 100644 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/mxc91231.h @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __MACH_MXC91231_H__ #define __MACH_MXC91231_H__ diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 5d2d21d414e0..04c0d060d814 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -20,9 +20,13 @@ #ifndef __ASM_ARCH_NAND_H #define __ASM_ARCH_NAND_H +#include <linux/mtd/partitions.h> + struct mxc_nand_platform_data { - int width; /* data bus width in bytes */ - int hw_ecc:1; /* 0 if supress hardware ECC */ - int flash_bbt:1; /* set to 1 to use a flash based bbt */ + unsigned int width; /* data bus width in bytes */ + unsigned int hw_ecc:1; /* 0 if supress hardware ECC */ + unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ + struct mtd_partition *parts; /* partition table */ + int nr_parts; /* size of parts */ }; #endif /* __ASM_ARCH_NAND_H */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index ef00199568de..4acd1143a9bd 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 024416ed11cd..2d9624697cc9 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_TIMEX_H__ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index b6d3d0fddc48..d9bd37e4667a 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ #define __ASM_ARCH_MXC_UNCOMPRESS_H__ diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h index 44243a278434..ef6379c474be 100644 --- a/arch/arm/plat-mxc/include/mach/vmalloc.h +++ b/arch/arm/plat-mxc/include/mach/vmalloc.h @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_VMALLOC_H__ diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 778ddfe57d89..7331f2ace5fe 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -142,9 +142,6 @@ void __init mxc_init_irq(void __iomem *irqbase) for (i = 0; i < 8; i++) __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); - /* init architectures chained interrupt handler */ - mxc_register_gpios(); - #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(); diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 97f42799fa58..925bce4607e7 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 9b86d2a60d43..b3da9aad4295 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -145,8 +145,6 @@ void __init tzic_init_irq(void __iomem *irqbase) set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } - mxc_register_gpios(); - pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); } diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 5a6ef252c38b..977c8f9a07a2 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -23,6 +23,7 @@ #include <linux/irq.h> #include <linux/slab.h> +#include <plat/pincfg.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -46,28 +47,217 @@ struct nmk_gpio_chip { u32 edge_falling; }; +static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int gpio_mode) +{ + u32 bit = 1 << offset; + u32 afunc, bfunc; + + afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; + bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; + if (gpio_mode & NMK_GPIO_ALT_A) + afunc |= bit; + if (gpio_mode & NMK_GPIO_ALT_B) + bfunc |= bit; + writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); + writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); +} + +static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, + unsigned offset, enum nmk_gpio_slpm mode) +{ + u32 bit = 1 << offset; + u32 slpm; + + slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC); + if (mode == NMK_GPIO_SLPM_NOCHANGE) + slpm |= bit; + else + slpm &= ~bit; + writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC); +} + +static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, + unsigned offset, enum nmk_gpio_pull pull) +{ + u32 bit = 1 << offset; + u32 pdis; + + pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); + if (pull == NMK_GPIO_PULL_NONE) + pdis |= bit; + else + pdis &= ~bit; + writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); + + if (pull == NMK_GPIO_PULL_UP) + writel(bit, nmk_chip->addr + NMK_GPIO_DATS); + else if (pull == NMK_GPIO_PULL_DOWN) + writel(bit, nmk_chip->addr + NMK_GPIO_DATC); +} + +static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, + unsigned offset) +{ + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); +} + +static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, + pin_cfg_t cfg) +{ + static const char *afnames[] = { + [NMK_GPIO_ALT_GPIO] = "GPIO", + [NMK_GPIO_ALT_A] = "A", + [NMK_GPIO_ALT_B] = "B", + [NMK_GPIO_ALT_C] = "C" + }; + static const char *pullnames[] = { + [NMK_GPIO_PULL_NONE] = "none", + [NMK_GPIO_PULL_UP] = "up", + [NMK_GPIO_PULL_DOWN] = "down", + [3] /* illegal */ = "??" + }; + static const char *slpmnames[] = { + [NMK_GPIO_SLPM_INPUT] = "input", + [NMK_GPIO_SLPM_NOCHANGE] = "no-change", + }; + + int pin = PIN_NUM(cfg); + int pull = PIN_PULL(cfg); + int af = PIN_ALT(cfg); + int slpm = PIN_SLPM(cfg); + + dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n", + pin, afnames[af], pullnames[pull], slpmnames[slpm]); + + __nmk_gpio_make_input(nmk_chip, offset); + __nmk_gpio_set_pull(nmk_chip, offset, pull); + __nmk_gpio_set_slpm(nmk_chip, offset, slpm); + __nmk_gpio_set_mode(nmk_chip, offset, af); +} + +/** + * nmk_config_pin - configure a pin's mux attributes + * @cfg: pin confguration + * + * Configures a pin's mode (alternate function or GPIO), its pull up status, + * and its sleep mode based on the specified configuration. The @cfg is + * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These + * are constructed using, and can be further enhanced with, the macros in + * plat/pincfg.h. + * + * If a pin's mode is set to GPIO, it is configured as an input to avoid + * side-effects. The gpio can be manipulated later using standard GPIO API + * calls. + */ +int nmk_config_pin(pin_cfg_t cfg) +{ + struct nmk_gpio_chip *nmk_chip; + int gpio = PIN_NUM(cfg); + unsigned long flags; + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} +EXPORT_SYMBOL(nmk_config_pin); + +/** + * nmk_config_pins - configure several pins at once + * @cfgs: array of pin configurations + * @num: number of elments in the array + * + * Configures several pins using nmk_config_pin(). Refer to that function for + * further information. + */ +int nmk_config_pins(pin_cfg_t *cfgs, int num) +{ + int ret = 0; + int i; + + for (i = 0; i < num; i++) { + int ret = nmk_config_pin(cfgs[i]); + if (ret) + break; + } + + return ret; +} +EXPORT_SYMBOL(nmk_config_pins); + +/** + * nmk_gpio_set_slpm() - configure the sleep mode of a pin + * @gpio: pin number + * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, + * + * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is + * changed to an input (with pullup/down enabled) in sleep and deep sleep. If + * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was + * configured even when in sleep and deep sleep. + */ +int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} + +/** + * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio + * @gpio: pin number + * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE + * + * Enables/disables pull up/down on a specified pin. This only takes effect if + * the pin is configured as an input (either explicitly or by the alternate + * function). + * + * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is + * configured as an input. Otherwise, due to the way the controller registers + * work, this function will change the value output on the pin. + */ +int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} + /* Mode functions */ int nmk_gpio_set_mode(int gpio, int gpio_mode) { struct nmk_gpio_chip *nmk_chip; unsigned long flags; - u32 afunc, bfunc, bit; nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); if (!nmk_chip) return -EINVAL; - bit = 1 << (gpio - nmk_chip->chip.base); - spin_lock_irqsave(&nmk_chip->lock, flags); - afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; - bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; - if (gpio_mode & NMK_GPIO_ALT_A) - afunc |= bit; - if (gpio_mode & NMK_GPIO_ALT_B) - bfunc |= bit; - writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); - writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); + __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode); spin_unlock_irqrestore(&nmk_chip->lock, flags); return 0; @@ -111,32 +301,41 @@ static void nmk_gpio_irq_ack(unsigned int irq) writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); } +enum nmk_gpio_irq_type { + NORMAL, + WAKE, +}; + static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, - int gpio, bool enable) + int gpio, enum nmk_gpio_irq_type which, + bool enable) { + u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC; + u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC; u32 bitmask = nmk_gpio_get_bitmask(gpio); u32 reg; /* we must individually set/clear the two edges */ if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC); + reg = readl(nmk_chip->addr + rimsc); if (enable) reg |= bitmask; else reg &= ~bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC); + writel(reg, nmk_chip->addr + rimsc); } if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC); + reg = readl(nmk_chip->addr + fimsc); if (enable) reg |= bitmask; else reg &= ~bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC); + writel(reg, nmk_chip->addr + fimsc); } } -static void nmk_gpio_irq_modify(unsigned int irq, bool enable) +static int nmk_gpio_irq_modify(unsigned int irq, enum nmk_gpio_irq_type which, + bool enable) { int gpio; struct nmk_gpio_chip *nmk_chip; @@ -147,26 +346,35 @@ static void nmk_gpio_irq_modify(unsigned int irq, bool enable) nmk_chip = get_irq_chip_data(irq); bitmask = nmk_gpio_get_bitmask(gpio); if (!nmk_chip) - return; + return -EINVAL; spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_irq_modify(nmk_chip, gpio, enable); + __nmk_gpio_irq_modify(nmk_chip, gpio, which, enable); spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; } static void nmk_gpio_irq_mask(unsigned int irq) { - nmk_gpio_irq_modify(irq, false); -}; + nmk_gpio_irq_modify(irq, NORMAL, false); +} static void nmk_gpio_irq_unmask(unsigned int irq) { - nmk_gpio_irq_modify(irq, true); + nmk_gpio_irq_modify(irq, NORMAL, true); +} + +static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on) +{ + return nmk_gpio_irq_modify(irq, WAKE, on); } static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) { - bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED); + struct irq_desc *desc = irq_to_desc(irq); + bool enabled = !(desc->status & IRQ_DISABLED); + bool wake = desc->wake_depth; int gpio; struct nmk_gpio_chip *nmk_chip; unsigned long flags; @@ -186,7 +394,10 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) spin_lock_irqsave(&nmk_chip->lock, flags); if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, false); + __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false); + + if (wake) + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false); nmk_chip->edge_rising &= ~bitmask; if (type & IRQ_TYPE_EDGE_RISING) @@ -197,7 +408,10 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) nmk_chip->edge_falling |= bitmask; if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, true); + __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true); + + if (wake) + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true); spin_unlock_irqrestore(&nmk_chip->lock, flags); @@ -210,6 +424,7 @@ static struct irq_chip nmk_gpio_irq_chip = { .mask = nmk_gpio_irq_mask, .unmask = nmk_gpio_irq_unmask, .set_type = nmk_gpio_irq_set_type, + .set_wake = nmk_gpio_irq_set_wake, }; static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) @@ -266,16 +481,6 @@ static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) return 0; } -static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); - return 0; -} - static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) { struct nmk_gpio_chip *nmk_chip = @@ -298,12 +503,33 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, writel(bit, nmk_chip->addr + NMK_GPIO_DATC); } +static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); + nmk_gpio_set_output(chip, offset, val); + + return 0; +} + +static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset; +} + /* This structure is replicated for each GPIO block allocated at probe time */ static struct gpio_chip nmk_gpio_template = { .direction_input = nmk_gpio_make_input, .get = nmk_gpio_get_input, .direction_output = nmk_gpio_make_output, .set = nmk_gpio_set_output, + .to_irq = nmk_gpio_to_irq, .ngpio = NMK_GPIO_PER_CHIP, .can_sleep = 0, }; @@ -393,30 +619,12 @@ out: return ret; } -static int __exit nmk_gpio_remove(struct platform_device *dev) -{ - struct nmk_gpio_chip *nmk_chip; - struct resource *res; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - - nmk_chip = platform_get_drvdata(dev); - gpiochip_remove(&nmk_chip->chip); - clk_disable(nmk_chip->clk); - clk_put(nmk_chip->clk); - kfree(nmk_chip); - release_mem_region(res->start, resource_size(res)); - return 0; -} - - static struct platform_driver nmk_gpio_driver = { .driver = { .owner = THIS_MODULE, .name = "gpio", }, .probe = nmk_gpio_probe, - .remove = __exit_p(nmk_gpio_remove), .suspend = NULL, /* to be done */ .resume = NULL, }; @@ -426,7 +634,7 @@ static int __init nmk_gpio_init(void) return platform_driver_register(&nmk_gpio_driver); } -arch_initcall(nmk_gpio_init); +core_initcall(nmk_gpio_init); MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); MODULE_DESCRIPTION("Nomadik GPIO Driver"); diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index 4200811249ca..aba355101f49 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -55,6 +55,21 @@ #define NMK_GPIO_ALT_B 2 #define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) +/* Pull up/down values */ +enum nmk_gpio_pull { + NMK_GPIO_PULL_NONE, + NMK_GPIO_PULL_UP, + NMK_GPIO_PULL_DOWN, +}; + +/* Sleep mode */ +enum nmk_gpio_slpm { + NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_NOCHANGE, +}; + +extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); +extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); extern int nmk_gpio_set_mode(int gpio, int gpio_mode); extern int nmk_gpio_get_mode(int gpio); diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h index 42c907258b14..65704a3d4241 100644 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ b/arch/arm/plat-nomadik/include/plat/mtu.h @@ -1,6 +1,12 @@ #ifndef __PLAT_MTU_H #define __PLAT_MTU_H +/* + * Guaranteed runtime conversion range in seconds for + * the clocksource and clockevent. + */ +#define MTU_MIN_RANGE 4 + /* should be set by the platform code */ extern void __iomem *mtu_base; diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h new file mode 100644 index 000000000000..7eed11c1038d --- /dev/null +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * + * Based on arch/arm/mach-pxa/include/mach/mfp.h: + * Copyright (C) 2007 Marvell International Ltd. + * eric miao <eric.miao@marvell.com> + */ + +#ifndef __PLAT_PINCFG_H +#define __PLAT_PINCFG_H + +/* + * pin configurations are represented by 32-bit integers: + * + * bit 0.. 8 - Pin Number (512 Pins Maximum) + * bit 9..10 - Alternate Function Selection + * bit 11..12 - Pull up/down state + * bit 13 - Sleep mode behaviour + * + * to facilitate the definition, the following macros are provided + * + * PIN_CFG_DEFAULT - default config (0): + * pull up/down = disabled + * sleep mode = input + * + * PIN_CFG - default config with alternate function + * PIN_CFG_PULL - default config with alternate function and pull up/down + */ + +typedef unsigned long pin_cfg_t; + +#define PIN_NUM_MASK 0x1ff +#define PIN_NUM(x) ((x) & PIN_NUM_MASK) + +#define PIN_ALT_SHIFT 9 +#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) +#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) +#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) +#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) +#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) +#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) + +#define PIN_PULL_SHIFT 11 +#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) +#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) +#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) +#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) +#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) + +#define PIN_SLPM_SHIFT 13 +#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) +#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) +#define PIN_SLPM_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) + +#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT) + +#define PIN_CFG(num, alt) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt)) + +#define PIN_CFG_PULL(num, alt, pull) \ + ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ + (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) + +extern int nmk_config_pin(pin_cfg_t cfg); +extern int nmk_config_pins(pin_cfg_t *cfgs, int num); + +#endif diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index 08aaa4a7f65f..ea3ca86c5283 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -42,7 +42,6 @@ static struct clocksource nmdk_clksrc = { .rating = 200, .read = nmdk_read_timer_dummy, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -82,6 +81,12 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_UNUSED: /* disable irq */ writel(0, mtu_base + MTU_IMSC); + /* disable timer */ + cr = readl(mtu_base + MTU_CR(1)); + cr &= ~MTU_CRn_ENA; + writel(cr, mtu_base + MTU_CR(1)); + /* load some high default value */ + writel(0xffffffff, mtu_base + MTU_LR(1)); break; case CLOCK_EVT_MODE_RESUME: break; @@ -98,7 +103,6 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) static struct clock_event_device nmdk_clkevt = { .name = "mtu_1", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 200, .set_mode = nmdk_clkevt_mode, .set_next_event = nmdk_clkevt_next, @@ -151,6 +155,7 @@ void __init nmdk_timer_init(void) } else { cr |= MTU_CRn_PRESCALE_1; } + clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE); /* Timer 0 is the free running clocksource */ writel(cr, mtu_base + MTU_CR(0)); @@ -158,7 +163,6 @@ void __init nmdk_timer_init(void) writel(0, mtu_base + MTU_BGLR(0)); writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); - nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); /* Now the scheduling clock is ready */ nmdk_clksrc.read = nmdk_read_timer; @@ -175,8 +179,10 @@ void __init nmdk_timer_init(void) } else { cr |= MTU_CRn_PRESCALE_1; } + clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); + writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ - nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); + nmdk_clkevt.max_delta_ns = clockevent_delta2ns(0xffffffff, &nmdk_clkevt); nmdk_clkevt.min_delta_ns = diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 219c01e82bc5..ebed82699eb2 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -22,6 +22,7 @@ #include <linux/serial_reg.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/system.h> @@ -35,6 +36,7 @@ #include <plat/mux.h> #include <plat/fpga.h> #include <plat/serial.h> +#include <plat/vram.h> #include <plat/clock.h> @@ -81,6 +83,12 @@ const void *omap_get_var_config(u16 tag, size_t *len) } EXPORT_SYMBOL(omap_get_var_config); +void __init omap_reserve(void) +{ + omapfb_reserve_sdram_memblock(); + omap_vram_reserve_sdram_memblock(); +} + /* * 32KHz clocksource ... always available, on pretty most chips except * OMAP 730 and 1510. Other timers could be used as clocksources, with diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index d3eea4f47533..0054b9501a53 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -26,7 +26,7 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/io.h> #include <linux/omapfb.h> @@ -171,49 +171,78 @@ static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg, return 0; } +static int valid_sdram(unsigned long addr, unsigned long size) +{ + struct memblock_property res; + + res.base = addr; + res.size = size; + return !memblock_find(&res) && res.base == addr && res.size == size; +} + +static int reserve_sdram(unsigned long addr, unsigned long size) +{ + if (memblock_is_region_reserved(addr, size)) + return -EBUSY; + if (memblock_reserve(addr, size)) + return -ENOMEM; + return 0; +} + /* * Called from map_io. We need to call to this early enough so that we * can reserve the fixed SDRAM regions before VM could get hold of them. */ -void __init omapfb_reserve_sdram(void) +void __init omapfb_reserve_sdram_memblock(void) { - struct bootmem_data *bdata; - unsigned long sdram_start, sdram_size; - unsigned long reserved; - int i; + unsigned long reserved = 0; + int i; if (config_invalid) return; - bdata = NODE_DATA(0)->bdata; - sdram_start = bdata->node_min_pfn << PAGE_SHIFT; - sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; - reserved = 0; for (i = 0; ; i++) { - struct omapfb_mem_region rg; + struct omapfb_mem_region rg; if (get_fbmem_region(i, &rg) < 0) break; + if (i == OMAPFB_PLANE_NUM) { - printk(KERN_ERR - "Extraneous FB mem configuration entries\n"); + pr_err("Extraneous FB mem configuration entries\n"); config_invalid = 1; return; } + /* Check if it's our memory type. */ - if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM, - sdram_start, sdram_size) < 0 || - (rg.type != OMAPFB_MEMTYPE_SDRAM)) + if (rg.type != OMAPFB_MEMTYPE_SDRAM) continue; - BUG_ON(omapfb_config.mem_desc.region[i].size); - if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) { + + /* Check if the region falls within SDRAM */ + if (rg.paddr && !valid_sdram(rg.paddr, rg.size)) + continue; + + if (rg.size == 0) { + pr_err("Zero size for FB region %d\n", i); config_invalid = 1; return; } + if (rg.paddr) { - reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT); + if (reserve_sdram(rg.paddr, rg.size)) { + pr_err("Trying to use reserved memory for FB region %d\n", + i); + config_invalid = 1; + return; + } reserved += rg.size; } + + if (omapfb_config.mem_desc.region[i].size) { + pr_err("FB region %d already set\n", i); + config_invalid = 1; + return; + } + omapfb_config.mem_desc.region[i] = rg; configured_regions++; } @@ -359,7 +388,10 @@ static inline int omap_init_fb(void) arch_initcall(omap_init_fb); -void omapfb_reserve_sdram(void) {} +void omapfb_reserve_sdram_memblock(void) +{ +} + unsigned long omapfb_reserve_sram(unsigned long sram_pstart, unsigned long sram_vstart, unsigned long sram_size, @@ -375,7 +407,10 @@ void omapfb_set_platform_data(struct omapfb_platform_data *data) { } -void omapfb_reserve_sdram(void) {} +void omapfb_reserve_sdram_memblock(void) +{ +} + unsigned long omapfb_reserve_sram(unsigned long sram_pstart, unsigned long sram_vstart, unsigned long sram_size, diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index d265018f5e6b..5e4afbee0fd7 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -34,6 +34,8 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; +extern void omap_reserve(void); + /* * IO bases for various OMAP processors * Except the tap base, rest all the io bases diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h index edd4987758a6..0aa4ecd12c7d 100644 --- a/arch/arm/plat-omap/include/plat/vram.h +++ b/arch/arm/plat-omap/include/plat/vram.h @@ -38,7 +38,7 @@ extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, extern void omap_vram_set_sdram_vram(u32 size, u32 start); extern void omap_vram_set_sram_vram(u32 size, u32 start); -extern void omap_vram_reserve_sdram(void); +extern void omap_vram_reserve_sdram_memblock(void); extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, unsigned long sram_vstart, unsigned long sram_size, @@ -48,7 +48,7 @@ extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } -static inline void omap_vram_reserve_sdram(void) { } +static inline void omap_vram_reserve_sdram_memblock(void) { } static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, unsigned long sram_vstart, unsigned long sram_size, diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index 54c84a492a0f..779553a1595e 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -13,6 +13,7 @@ #include <linux/mbus.h> #include <asm/mach/pci.h> #include <plat/pcie.h> +#include <linux/delay.h> /* * PCIe unit register offsets. @@ -46,6 +47,8 @@ #define PCIE_STAT_BUS_OFFS 8 #define PCIE_STAT_BUS_MASK 0xff #define PCIE_STAT_LINK_DOWN 1 +#define PCIE_DEBUG_CTRL 0x1a60 +#define PCIE_DEBUG_SOFT_RESET (1<<20) u32 __init orion_pcie_dev_id(void __iomem *base) @@ -85,6 +88,32 @@ void __init orion_pcie_set_local_bus_nr(void __iomem *base, int nr) writel(stat, base + PCIE_STAT_OFF); } +void __init orion_pcie_reset(void __iomem *base) +{ + u32 reg; + int i; + + /* + * MV-S104860-U0, Rev. C: + * PCI Express Unit Soft Reset + * When set, generates an internal reset in the PCI Express unit. + * This bit should be cleared after the link is re-established. + */ + reg = readl(base + PCIE_DEBUG_CTRL); + reg |= PCIE_DEBUG_SOFT_RESET; + writel(reg, base + PCIE_DEBUG_CTRL); + + for (i = 0; i < 20; i++) { + mdelay(10); + + if (orion_pcie_link_up(base)) + break; + } + + reg &= ~(PCIE_DEBUG_SOFT_RESET); + writel(reg, base + PCIE_DEBUG_CTRL); +} + /* * Setup PCIE BARs and Address Decode Wins: * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks @@ -153,6 +182,11 @@ void __init orion_pcie_setup(void __iomem *base, u32 mask; /* + * soft reset PCIe unit + */ + orion_pcie_reset(base); + + /* * Point PCIe unit MBUS decode windows to DRAM space. */ orion_pcie_setup_wins(base, dram); diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index a1025d38f383..ab211652e4ca 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -58,6 +58,11 @@ #define INT_STATUS 0x1 +/* + * Minimum clocksource/clockevent timer range in seconds + */ +#define SPEAR_MIN_RANGE 4 + static __iomem void *gpt_base; static struct clk *gpt_clk; @@ -66,44 +71,6 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long evt, struct clock_event_device *clk_event_dev); -/* - * Following clocksource_set_clock and clockevent_set_clock picked - * from arch/mips/kernel/time.c - */ - -void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) -{ - u64 temp; - u32 shift; - - /* Find a shift value */ - for (shift = 32; shift > 0; shift--) { - temp = (u64) NSEC_PER_SEC << shift; - do_div(temp, clock); - if ((temp >> 32) == 0) - break; - } - cs->shift = shift; - cs->mult = (u32) temp; -} - -void __init clockevent_set_clock(struct clock_event_device *cd, - unsigned int clock) -{ - u64 temp; - u32 shift; - - /* Find a shift value */ - for (shift = 32; shift > 0; shift--) { - temp = (u64) clock << shift; - do_div(temp, NSEC_PER_SEC); - if ((temp >> 32) == 0) - break; - } - cd->shift = shift; - cd->mult = (u32) temp; -} - static cycle_t clocksource_read_cycles(struct clocksource *cs) { return (cycle_t) readw(gpt_base + COUNT(CLKSRC)); @@ -138,7 +105,7 @@ static void spear_clocksource_init(void) val |= CTRL_ENABLE ; writew(val, gpt_base + CR(CLKSRC)); - clocksource_set_clock(&clksrc, tick_rate); + clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE); /* register the clocksource */ clocksource_register(&clksrc); @@ -233,7 +200,7 @@ static void __init spear_clockevent_init(void) tick_rate = clk_get_rate(gpt_clk); tick_rate >>= CTRL_PRESCALER16; - clockevent_set_clock(&clkevt, tick_rate); + clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE); clkevt.max_delta_ns = clockevent_delta2ns(0xfff0, &clkevt); diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 9b1a66816aa6..5cf88e8427b1 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -2,3 +2,7 @@ obj-y := clock.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o +ifeq ($(CONFIG_LEDS_CLASS),y) +obj-$(CONFIG_ARCH_REALVIEW) += leds.o +obj-$(CONFIG_ARCH_VERSATILE) += leds.o +endif diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c new file mode 100644 index 000000000000..3169fa555ea6 --- /dev/null +++ b/arch/arm/plat-versatile/leds.c @@ -0,0 +1,103 @@ +/* + * Driver for the 8 user LEDs found on the RealViews and Versatiles + * Based on DaVinci's DM365 board code + * + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij <triad@df.lth.se> + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/leds.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +#ifdef VERSATILE_SYS_BASE +#define LEDREG (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) +#endif + +#ifdef REALVIEW_SYS_BASE +#define LEDREG (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) +#endif + +struct versatile_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} versatile_leds[] = { + { "versatile:0", "heartbeat", }, + { "versatile:1", "mmc0", }, + { "versatile:2", }, + { "versatile:3", }, + { "versatile:4", }, + { "versatile:5", }, + { "versatile:6", }, + { "versatile:7", }, +}; + +static void versatile_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct versatile_led *led = container_of(cdev, + struct versatile_led, cdev); + u32 reg = readl(LEDREG); + + if (b != LED_OFF) + reg |= led->mask; + else + reg &= ~led->mask; + writel(reg, LEDREG); +} + +static enum led_brightness versatile_led_get(struct led_classdev *cdev) +{ + struct versatile_led *led = container_of(cdev, + struct versatile_led, cdev); + u32 reg = readl(LEDREG); + + return (reg & led->mask) ? LED_FULL : LED_OFF; +} + +static int __init versatile_leds_init(void) +{ + int i; + + /* All ON */ + writel(0xff, LEDREG); + for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) { + struct versatile_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = versatile_leds[i].name; + led->cdev.brightness_set = versatile_led_set; + led->cdev.brightness_get = versatile_led_get; + led->cdev.default_trigger = versatile_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(versatile_leds_init); diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 315a540c7ce5..8063a322c790 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -15,6 +15,7 @@ #include <linux/sched.h> #include <linux/init.h> +#include <asm/cputype.h> #include <asm/thread_notify.h> #include <asm/vfp.h> @@ -549,10 +550,13 @@ static int __init vfp_init(void) /* * Check for the presence of the Advanced SIMD * load/store instructions, integer and single - * precision floating point operations. + * precision floating point operations. Only check + * for NEON if the hardware has the MVFR registers. */ - if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) - elf_hwcap |= HWCAP_NEON; + if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) { + if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) + elf_hwcap |= HWCAP_NEON; + } #endif } return 0; |
