diff options
Diffstat (limited to 'arch')
21 files changed, 1736 insertions, 337 deletions
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 2c9a030c5595..63d68cf908af 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -275,3 +275,30 @@ static int __init omap1_init_devices(void) } arch_initcall(omap1_init_devices); +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) + +static struct resource wdt_resources[] = { + { + .start = 0xfffeb000, + .end = 0xfffeb07F, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap_wdt", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static int __init omap_init_wdt(void) +{ + if (!cpu_is_omap16xx()) + return; + + platform_device_register(&omap_wdt_device); + return 0; +} +subsys_initcall(omap_init_wdt); +#endif diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1c4b2377862b..91dd215d05f0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,9 +11,8 @@ config ARCH_OMAP2PLUS_TYPICAL select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 - select SERIAL_8250 - select SERIAL_CORE_CONSOLE - select SERIAL_8250_CONSOLE + select SERIAL_OMAP + select SERIAL_OMAP_CONSOLE select I2C select I2C_OMAP select MFD @@ -222,12 +221,18 @@ config MACH_OMAP_ZOOM2 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBP + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35 module" diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 2b2e0efd5570..3ef092f839ca 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -208,7 +208,6 @@ static struct flash_partitions sdp_flash_partitions[] = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); - omap_serial_init(); zoom_peripherals_init(); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 073fd9b4c36d..239c1f0eb940 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -285,4 +285,5 @@ void __init zoom_peripherals_init(void) omap_i2c_init(); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); + omap_serial_init(); } diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index c73906d17458..ba01ec0cae45 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -2465,6 +2465,16 @@ static struct clk uart3_fck = { .recalc = &followparent_recalc, }; +static struct clk uart4_fck = { + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3630_EN_UART4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt2_fck = { .name = "gpt2_fck", .ops = &clkops_omap2_dflt_wait, @@ -2715,6 +2725,16 @@ static struct clk uart3_ick = { .recalc = &followparent_recalc, }; +static struct clk uart4_ick = { + .name = "uart4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3630_EN_UART4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt9_ick = { .name = "gpt9_ick", .ops = &clkops_omap2_dflt_wait, @@ -3349,6 +3369,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), + CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), @@ -3372,6 +3393,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX), CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX), CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX), + CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX), CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX), CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX), CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX), diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index fe82b79d5f3b..4f959a7d881c 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -649,6 +649,8 @@ #define OMAP3430_ST_MCBSP2_MASK (1 << 0) /* CM_AUTOIDLE_PER */ +#define OMAP3630_AUTO_UART4_MASK (1 << 18) +#define OMAP3630_AUTO_UART4_SHIFT 18 #define OMAP3430_AUTO_GPIO6_MASK (1 << 17) #define OMAP3430_AUTO_GPIO6_SHIFT 17 #define OMAP3430_AUTO_GPIO5_MASK (1 << 16) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9bd4b3452453..5eb0b58b2e95 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/err.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -28,6 +29,8 @@ #include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include "mux.h" @@ -930,3 +933,39 @@ static int __init omap2_init_devices(void) return 0; } arch_initcall(omap2_init_devices); + +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) +struct omap_device_pm_latency omap_wdt_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +static int __init omap_init_wdt(void) +{ + int id = -1; + struct omap_device *od; + struct omap_hwmod *oh; + char *oh_name = "wd_timer2"; + char *dev_name = "omap_wdt"; + + if (!cpu_class_is_omap2()) + return 0; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up wd_timer%d hwmod\n", id); + return -EINVAL; + } + + od = omap_device_build(dev_name, id, oh, NULL, 0, + omap_wdt_latency, + ARRAY_SIZE(omap_wdt_latency), 0); + WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + dev_name, oh->name); + return 0; +} +subsys_initcall(omap_init_wdt); +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 3cc768e8bc04..adf6e3632a2b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -15,10 +15,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" +#include "cm-regbits-24xx.h" /* * OMAP2420 hardware module integration data @@ -33,6 +35,7 @@ static struct omap_hwmod omap2420_mpu_hwmod; static struct omap_hwmod omap2420_iva_hwmod; static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; +static struct omap_hwmod omap2420_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = { @@ -71,6 +74,9 @@ static struct omap_hwmod omap2420_l3_main_hwmod = { }; static struct omap_hwmod omap2420_l4_wkup_hwmod; +static struct omap_hwmod omap2420_uart1_hwmod; +static struct omap_hwmod omap2420_uart2_hwmod; +static struct omap_hwmod omap2420_uart3_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { @@ -79,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = { + { + .pa_start = OMAP2_UART1_BASE, + .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap2420_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap2420_uart2_addr_space[] = { + { + .pa_start = OMAP2_UART2_BASE, + .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap2420_uart2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap2420_uart3_addr_space[] = { + { + .pa_start = OMAP2_UART3_BASE, + .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap2420_uart3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { &omap2420_l3_main__l4_core, @@ -87,6 +147,9 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { /* Master interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = { &omap2420_l4_core__l4_wkup, + &omap2_l4_core__uart1, + &omap2_l4_core__uart2, + &omap2_l4_core__uart3, }; /* L4 CORE */ @@ -165,12 +228,206 @@ static struct omap_hwmod omap2420_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = { + { + .pa_start = 0x48022000, + .pa_end = 0x4802207f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = { + .master = &omap2420_l4_wkup_hwmod, + .slave = &omap2420_wd_timer2_hwmod, + .clk = "mpu_wdt_ick", + .addr = omap2420_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap2420_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = { + &omap2420_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap2420_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap2420_wd_timer_hwmod_class, + .main_clk = "mpu_wdt_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, + }, + }, + .slaves = omap2420_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART */ + +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +/* UART1 */ + +static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = { + &omap2_l4_core__uart1, +}; + +static struct omap_hwmod omap2420_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = uart1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), + .sdma_reqs = uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, + }, + }, + .slaves = omap2420_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART2 */ + +static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = { + &omap2_l4_core__uart2, +}; + +static struct omap_hwmod omap2420_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = uart2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), + .sdma_reqs = uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, + }, + }, + .slaves = omap2420_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART3 */ + +static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = { + &omap2_l4_core__uart3, +}; + +static struct omap_hwmod omap2420_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = uart3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), + .sdma_reqs = uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP24XX_EN_UART3_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, + }, + }, + .slaves = omap2420_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, &omap2420_l4_wkup_hwmod, &omap2420_mpu_hwmod, &omap2420_iva_hwmod, + &omap2420_wd_timer2_hwmod, + &omap2420_uart1_hwmod, + &omap2420_uart2_hwmod, + &omap2420_uart3_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4526628ed287..12d939e456cf 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -15,10 +15,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" +#include "cm-regbits-24xx.h" /* * OMAP2430 hardware module integration data @@ -33,6 +35,7 @@ static struct omap_hwmod omap2430_mpu_hwmod; static struct omap_hwmod omap2430_iva_hwmod; static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; +static struct omap_hwmod omap2430_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { @@ -71,6 +74,9 @@ static struct omap_hwmod omap2430_l3_main_hwmod = { }; static struct omap_hwmod omap2430_l4_wkup_hwmod; +static struct omap_hwmod omap2430_uart1_hwmod; +static struct omap_hwmod omap2430_uart2_hwmod; +static struct omap_hwmod omap2430_uart3_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { @@ -79,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap2430_uart1_addr_space[] = { + { + .pa_start = OMAP2_UART1_BASE, + .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap2430_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap2430_uart2_addr_space[] = { + { + .pa_start = OMAP2_UART2_BASE, + .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap2430_uart2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap2430_uart3_addr_space[] = { + { + .pa_start = OMAP2_UART3_BASE, + .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap2430_uart3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { &omap2430_l3_main__l4_core, @@ -104,6 +164,9 @@ static struct omap_hwmod omap2430_l4_core_hwmod = { /* Slave interfaces on the L4_WKUP interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = { &omap2430_l4_core__l4_wkup, + &omap2_l4_core__uart1, + &omap2_l4_core__uart2, + &omap2_l4_core__uart3, }; /* Master interfaces on the L4_WKUP interconnect */ @@ -165,12 +228,206 @@ static struct omap_hwmod omap2430_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = { + { + .pa_start = 0x49016000, + .pa_end = 0x4901607f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { + .master = &omap2430_l4_wkup_hwmod, + .slave = &omap2430_wd_timer2_hwmod, + .clk = "mpu_wdt_ick", + .addr = omap2430_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap2430_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = { + &omap2430_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap2430_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap2430_wd_timer_hwmod_class, + .main_clk = "mpu_wdt_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, + }, + }, + .slaves = omap2430_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART */ + +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +/* UART1 */ + +static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = { + &omap2_l4_core__uart1, +}; + +static struct omap_hwmod omap2430_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = uart1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), + .sdma_reqs = uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, + }, + }, + .slaves = omap2430_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART2 */ + +static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = { + &omap2_l4_core__uart2, +}; + +static struct omap_hwmod omap2430_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = uart2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), + .sdma_reqs = uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, + }, + }, + .slaves = omap2430_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART3 */ + +static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = { + &omap2_l4_core__uart3, +}; + +static struct omap_hwmod omap2430_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = uart3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), + .sdma_reqs = uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP24XX_EN_UART3_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, + }, + }, + .slaves = omap2430_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, &omap2430_l4_wkup_hwmod, &omap2430_mpu_hwmod, &omap2430_iva_hwmod, + &omap2430_wd_timer2_hwmod, + &omap2430_uart1_hwmod, + &omap2430_uart2_hwmod, + &omap2430_uart3_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5d8eb58ba5e3..cb97ecf0a3f6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -17,10 +17,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" +#include "cm-regbits-34xx.h" /* * OMAP3xxx hardware module integration data @@ -36,6 +38,7 @@ static struct omap_hwmod omap3xxx_iva_hwmod; static struct omap_hwmod omap3xxx_l3_main_hwmod; static struct omap_hwmod omap3xxx_l4_core_hwmod; static struct omap_hwmod omap3xxx_l4_per_hwmod; +static struct omap_hwmod omap3xxx_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { @@ -82,6 +85,10 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod = { }; static struct omap_hwmod omap3xxx_l4_wkup_hwmod; +static struct omap_hwmod omap3xxx_uart1_hwmod; +static struct omap_hwmod omap3xxx_uart2_hwmod; +static struct omap_hwmod omap3xxx_uart3_hwmod; +static struct omap_hwmod omap3xxx_uart4_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { @@ -90,6 +97,78 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = { + { + .pa_start = OMAP3_UART1_BASE, + .pa_end = OMAP3_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap3xxx_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = { + { + .pa_start = OMAP3_UART2_BASE, + .pa_end = OMAP3_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap3xxx_uart2_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = { + { + .pa_start = OMAP3_UART3_BASE, + .pa_end = OMAP3_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap3xxx_uart3_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART4 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = { + { + .pa_start = OMAP3_UART4_BASE, + .pa_end = OMAP3_UART4_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_uart4_hwmod, + .clk = "uart4_ick", + .addr = omap3xxx_uart4_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart4_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { &omap3xxx_l3_main__l4_core, @@ -98,6 +177,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { /* Master interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = { &omap3xxx_l4_core__l4_wkup, + &omap3_l4_core__uart1, + &omap3_l4_core__uart2, }; /* L4 CORE */ @@ -119,6 +200,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = { /* Master interfaces on the L4_PER interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = { + &omap3_l4_per__uart3, + &omap3_l4_per__uart4, }; /* L4 PER */ @@ -197,6 +280,235 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = { + { + .pa_start = 0x48314000, + .pa_end = 0x4831407f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_wd_timer2_hwmod, + .clk = "wdt2_ick", + .addr = omap3xxx_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap3xxx_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod_ocp_if *omap3xxx_wd_timer2_slaves[] = { + &omap3xxx_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap3xxx_wd_timer_hwmod_class, + .main_clk = "wdt2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_WDT2_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT, + }, + }, + .slaves = omap3xxx_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* UART common */ + +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +/* UART1 */ + +static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = { + &omap3_l4_core__uart1, +}; + +static struct omap_hwmod omap3xxx_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = uart1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), + .sdma_reqs = uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART1_SHIFT, + }, + }, + .slaves = omap3xxx_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* UART2 */ + +static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = { + &omap3_l4_core__uart2, +}; + +static struct omap_hwmod omap3xxx_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = uart2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), + .sdma_reqs = uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART2_SHIFT, + }, + }, + .slaves = omap3xxx_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* UART3 */ + +static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = { + &omap3_l4_per__uart3, +}; + +static struct omap_hwmod omap3xxx_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = uart3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), + .sdma_reqs = uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_PER_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART3_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART3_SHIFT, + }, + }, + .slaves = omap3xxx_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* UART4 */ + +static struct omap_hwmod_irq_info uart4_mpu_irqs[] = { + { .irq = INT_36XX_UART4_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart4_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP36XX_DMA_UART4_RX, }, + { .name = "tx", .dma_req = OMAP36XX_DMA_UART4_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = { + &omap3_l4_per__uart4, +}; + +static struct omap_hwmod omap3xxx_uart4_hwmod = { + .name = "uart4", + .mpu_irqs = uart4_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart4_mpu_irqs), + .sdma_reqs = uart4_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart4_sdma_reqs), + .main_clk = "uart4_fck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_PER_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3630_EN_UART4_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3630_EN_UART4_SHIFT, + }, + }, + .slaves = omap3xxx_uart4_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, @@ -204,6 +516,11 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l4_wkup_hwmod, &omap3xxx_mpu_hwmod, &omap3xxx_iva_hwmod, + &omap3xxx_wd_timer2_hwmod, + &omap3xxx_uart1_hwmod, + &omap3xxx_uart2_hwmod, + &omap3xxx_uart3_hwmod, + &omap3xxx_uart4_hwmod, NULL, }; @@ -211,5 +528,3 @@ int __init omap3xxx_hwmod_init(void) { return omap_hwmod_init(omap3xxx_hwmods); } - - diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index e20b0eebc6d9..7274db4de487 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -452,6 +452,365 @@ static struct omap_hwmod omap44xx_mpu_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +/* + * 'uart' class + * universal asynchronous receiver/transmitter (uart) + */ + +static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = { + .rev_offs = 0x0050, + .sysc_offs = 0x0054, + .syss_offs = 0x0058, + .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap44xx_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod omap44xx_wd_timer2_hwmod; +static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = { + { .irq = 80 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = { + { + .pa_start = 0x4a314000, + .pa_end = 0x4a31407f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_class omap44xx_uart_hwmod_class = { + .name = "uart", + .sysc = &omap44xx_uart_sysc, +}; + +/* uart1 */ +static struct omap_hwmod omap44xx_uart1_hwmod; +static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = { + { .irq = 72 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = { + { .name = "tx", .dma_req = 48 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 49 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = { + { + .pa_start = 0x4806a000, + .pa_end = 0x4806a0ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> uart1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_uart1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* uart1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = { + &omap44xx_l4_per__uart1, +}; + +static struct omap_hwmod omap44xx_uart1_hwmod = { + .name = "uart1", + .class = &omap44xx_uart_hwmod_class, + .mpu_irqs = omap44xx_uart1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart1_irqs), + .sdma_reqs = omap44xx_uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL, + }, + }, + .slaves = omap44xx_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* uart2 */ +static struct omap_hwmod omap44xx_uart2_hwmod; +static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = { + { .irq = 73 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = { + { .name = "tx", .dma_req = 50 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 51 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = { + { + .pa_start = 0x4806c000, + .pa_end = 0x4806c0ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_wd_timer2_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* wd_timer2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = { + &omap44xx_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap44xx_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap44xx_wd_timer_hwmod_class, + .mpu_irqs = omap44xx_wd_timer2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_wd_timer2_irqs), + .main_clk = "wd_timer2_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL, + }, + }, + .slaves = omap44xx_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* wd_timer3 */ +static struct omap_hwmod omap44xx_wd_timer3_hwmod; +static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = { + { .irq = 36 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = { + { + .pa_start = 0x40130000, + .pa_end = 0x4013007f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> uart2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_uart2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* uart2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = { + &omap44xx_l4_per__uart2, +}; + +static struct omap_hwmod omap44xx_uart2_hwmod = { + .name = "uart2", + .class = &omap44xx_uart_hwmod_class, + .mpu_irqs = omap44xx_uart2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart2_irqs), + .sdma_reqs = omap44xx_uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL, + }, + }, + .slaves = omap44xx_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* uart3 */ +static struct omap_hwmod omap44xx_uart3_hwmod; +static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = { + { .irq = 74 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = { + { .name = "tx", .dma_req = 52 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 53 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = { + { + .pa_start = 0x48020000, + .pa_end = 0x480200ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> wd_timer3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_wd_timer3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_wd_timer3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer3_addrs), + .user = OCP_USER_MPU, +}; + +/* l4_abe -> wd_timer3 (dma) */ +static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = { + { + .pa_start = 0x49030000, + .pa_end = 0x4903007f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> uart3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_uart3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* uart3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = { + &omap44xx_l4_per__uart3, +}; + +static struct omap_hwmod omap44xx_uart3_hwmod = { + .name = "uart3", + .class = &omap44xx_uart_hwmod_class, + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .mpu_irqs = omap44xx_uart3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart3_irqs), + .sdma_reqs = omap44xx_uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL, + }, + }, + .slaves = omap44xx_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* uart4 */ +static struct omap_hwmod omap44xx_uart4_hwmod; +static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = { + { .irq = 70 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = { + { .name = "tx", .dma_req = 54 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 55 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = { + { + .pa_start = 0x4806e000, + .pa_end = 0x4806e0ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_wd_timer3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_wd_timer3_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer3_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* wd_timer3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = { + &omap44xx_l4_abe__wd_timer3, + &omap44xx_l4_abe__wd_timer3_dma, +}; + +static struct omap_hwmod omap44xx_wd_timer3_hwmod = { + .name = "wd_timer3", + .class = &omap44xx_wd_timer_hwmod_class, + .mpu_irqs = omap44xx_wd_timer3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_wd_timer3_irqs), + .main_clk = "wd_timer3_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL, + }, + }, + .slaves = omap44xx_wd_timer3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l4_per -> uart4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart4_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_uart4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* uart4 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = { + &omap44xx_l4_per__uart4, +}; + +static struct omap_hwmod omap44xx_uart4_hwmod = { + .name = "uart4", + .class = &omap44xx_uart_hwmod_class, + .mpu_irqs = omap44xx_uart4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart4_irqs), + .sdma_reqs = omap44xx_uart4_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart4_sdma_reqs), + .main_clk = "uart4_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL, + }, + }, + .slaves = omap44xx_uart4_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* dmm class */ &omap44xx_dmm_hwmod, @@ -472,6 +831,15 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* mpu class */ &omap44xx_mpu_hwmod, + /* wd_timer class */ + &omap44xx_wd_timer2_hwmod, + &omap44xx_wd_timer3_hwmod, + + /* uart class */ + &omap44xx_uart1_hwmod, + &omap44xx_uart2_hwmod, + &omap44xx_uart3_hwmod, + &omap44xx_uart4_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ac572aaebb0f..e57c9aeeefe0 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -388,6 +388,7 @@ void omap_sram_idle(void) /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); + omap_uart_prepare_idle(3); omap2_gpio_prepare_for_idle(per_next_state); if (per_next_state == PWRDM_POWER_OFF) omap3_per_save_context(); @@ -459,6 +460,7 @@ void omap_sram_idle(void) if (per_prev_state == PWRDM_POWER_OFF) omap3_per_restore_context(); omap_uart_resume_idle(2); + omap_uart_resume_idle(3); } /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -676,6 +678,14 @@ static void __init omap3_d2d_idle(void) static void __init prcm_setup_regs(void) { + u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ? + OMAP3630_AUTO_UART4_MASK : 0; + u32 omap3630_en_uart4_mask = cpu_is_omap3630() ? + OMAP3630_EN_UART4_MASK : 0; + u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ? + OMAP3630_GRPSEL_UART4_MASK : 0; + + /* XXX Reset all wkdeps. This should be done when initializing * powerdomains */ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); @@ -762,6 +772,7 @@ static void __init prcm_setup_regs(void) CM_AUTOIDLE); cm_write_mod_reg( + omap3630_auto_uart4_mask | OMAP3430_AUTO_GPIO6_MASK | OMAP3430_AUTO_GPIO5_MASK | OMAP3430_AUTO_GPIO4_MASK | @@ -838,14 +849,16 @@ static void __init prcm_setup_regs(void) OMAP3430_DSS_MOD, PM_WKEN); /* Enable wakeups in PER */ - prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | + prm_write_mod_reg(omap3630_en_uart4_mask | + OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK | OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK | OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK | OMAP3430_EN_MCBSP4_MASK, OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ - prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK | + prm_write_mod_reg(omap3630_grpsel_uart4_mask | + OMAP3430_GRPSEL_GPIO2_MASK | OMAP3430_GRPSEL_GPIO3_MASK | OMAP3430_GRPSEL_GPIO4_MASK | OMAP3430_GRPSEL_GPIO5_MASK | diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 995b7edbf18d..298a22a754e2 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -382,6 +382,9 @@ #define OMAP3430_EN_MPU_SHIFT 1 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */ + +#define OMAP3630_EN_UART4_MASK (1 << 18) +#define OMAP3630_EN_UART4_SHIFT 18 #define OMAP3430_EN_GPIO6_MASK (1 << 17) #define OMAP3430_EN_GPIO6_SHIFT 17 #define OMAP3430_EN_GPIO5_MASK (1 << 16) @@ -422,6 +425,8 @@ #define OMAP3430_EN_MCBSP2_SHIFT 0 /* CM_IDLEST_PER, PM_WKST_PER shared bits */ +#define OMAP3630_ST_UART4_SHIFT 18 +#define OMAP3630_ST_UART4_MASK (1 << 18) #define OMAP3430_ST_GPIO6_SHIFT 17 #define OMAP3430_ST_GPIO6_MASK (1 << 17) #define OMAP3430_ST_GPIO5_SHIFT 16 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 7fd6023edf96..9e63cb743a97 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -122,6 +122,7 @@ #define OMAP3430_MEMRETSTATE_MASK (1 << 8) /* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */ +#define OMAP3630_GRPSEL_UART4_MASK (1 << 18) #define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) #define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) #define OMAP3430_GRPSEL_GPIO4_MASK (1 << 15) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 566e991ede81..0bcc9df0c034 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -19,19 +19,30 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/serial_8250.h> +#include <linux/pm_runtime.h> + +#ifdef CONFIG_SERIAL_OMAP +#include <plat/omap-serial.h> +#endif #include <plat/common.h> #include <plat/board.h> #include <plat/clock.h> #include <plat/control.h> +#include <plat/dma.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include "prm.h" #include "pm.h" +#include "cm.h" #include "prm-regbits-34xx.h" #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 @@ -48,6 +59,8 @@ */ #define DEFAULT_TIMEOUT 0 +#define MAX_UART_HWMOD_NAME_LEN 16 + struct omap_uart_state { int num; int can_sleep; @@ -58,14 +71,21 @@ struct omap_uart_state { void __iomem *wk_en; u32 wk_mask; u32 padconf; + u32 dma_enabled; struct clk *ick; struct clk *fck; int clocked; - struct plat_serial8250_port *p; + int irq; + int regshift; + int irqflags; + void __iomem *membase; + resource_size_t mapbase; + struct list_head node; - struct platform_device pdev; + struct omap_hwmod *oh; + struct platform_device *pdev; u32 errata; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) @@ -83,75 +103,47 @@ struct omap_uart_state { }; static LIST_HEAD(uart_list); +static u8 num_uarts; -static struct plat_serial8250_port serial_platform_data0[] = { - { - .irq = 72, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; +/* + * Since these idle/enable hooks are used in the idle path itself + * which has interrupts disabled, use the non-locking versions of + * the hwmod enable/disable functions. + */ +static int uart_idle_hwmod(struct omap_device *od) +{ + _omap_hwmod_idle(od->hwmods[0]); -static struct plat_serial8250_port serial_platform_data1[] = { - { - .irq = 73, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; + return 0; +} -static struct plat_serial8250_port serial_platform_data2[] = { - { - .irq = 74, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; +static int uart_enable_hwmod(struct omap_device *od) +{ + _omap_hwmod_enable(od->hwmods[0]); + + return 0; +} -static struct plat_serial8250_port serial_platform_data3[] = { +static struct omap_device_pm_latency omap_uart_latency[] = { { - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } + .deactivate_func = uart_idle_hwmod, + .activate_func = uart_enable_hwmod, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, }; -void __init omap2_set_globals_uart(struct omap_globals *omap2_globals) -{ - serial_platform_data0[0].mapbase = omap2_globals->uart1_phys; - serial_platform_data1[0].mapbase = omap2_globals->uart2_phys; - serial_platform_data2[0].mapbase = omap2_globals->uart3_phys; - serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; -} - static inline unsigned int __serial_read_reg(struct uart_port *up, - int offset) + int offset) { offset <<= up->regshift; return (unsigned int)__raw_readb(up->membase + offset); } -static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, +static inline unsigned int serial_read_reg(struct omap_uart_state *uart, int offset) { - offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + offset <<= uart->regshift; + return (unsigned int)__raw_readb(uart->membase + offset); } static inline void __serial_write_reg(struct uart_port *up, int offset, @@ -161,11 +153,11 @@ static inline void __serial_write_reg(struct uart_port *up, int offset, __raw_writeb(value, up->membase + offset); } -static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, +static inline void serial_write_reg(struct omap_uart_state *uart, int offset, int value) { - offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + offset <<= uart->regshift; + __raw_writeb(value, uart->membase + offset); } /* @@ -173,14 +165,12 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, * properly. Note that the TX watermark initialization may not be needed * once the 8250.c watermark handling code is merged. */ + static inline void __init omap_uart_reset(struct omap_uart_state *uart) { - struct plat_serial8250_port *p = uart->p; - - serial_write_reg(p, UART_OMAP_MDR1, 0x07); - serial_write_reg(p, UART_OMAP_SCR, 0x08); - serial_write_reg(p, UART_OMAP_MDR1, 0x00); - serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); + serial_write_reg(uart, UART_OMAP_MDR1, 0x07); + serial_write_reg(uart, UART_OMAP_SCR, 0x08); + serial_write_reg(uart, UART_OMAP_MDR1, 0x00); } #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) @@ -197,24 +187,23 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart) static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, u8 fcr_val) { - struct plat_serial8250_port *p = uart->p; u8 timeout = 255; - serial_write_reg(p, UART_OMAP_MDR1, mdr1_val); + serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val); udelay(2); - serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | + serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); /* * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and * TX_FIFO_E bit is 1. */ - while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) & + while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) & (UART_LSR_THRE | UART_LSR_DR))) { timeout--; if (!timeout) { /* Should *never* happen. we warn and carry on */ - dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n", - serial_read_reg(p, UART_LSR)); + dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n", + serial_read_reg(uart, UART_LSR)); break; } udelay(1); @@ -224,23 +213,22 @@ static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, static void omap_uart_save_context(struct omap_uart_state *uart) { u16 lcr = 0; - struct plat_serial8250_port *p = uart->p; if (!enable_off_mode) return; - lcr = serial_read_reg(p, UART_LCR); - serial_write_reg(p, UART_LCR, 0xBF); - uart->dll = serial_read_reg(p, UART_DLL); - uart->dlh = serial_read_reg(p, UART_DLM); - serial_write_reg(p, UART_LCR, lcr); - uart->ier = serial_read_reg(p, UART_IER); - uart->sysc = serial_read_reg(p, UART_OMAP_SYSC); - uart->scr = serial_read_reg(p, UART_OMAP_SCR); - uart->wer = serial_read_reg(p, UART_OMAP_WER); - serial_write_reg(p, UART_LCR, 0x80); - uart->mcr = serial_read_reg(p, UART_MCR); - serial_write_reg(p, UART_LCR, lcr); + lcr = serial_read_reg(uart, UART_LCR); + serial_write_reg(uart, UART_LCR, 0xBF); + uart->dll = serial_read_reg(uart, UART_DLL); + uart->dlh = serial_read_reg(uart, UART_DLM); + serial_write_reg(uart, UART_LCR, lcr); + uart->ier = serial_read_reg(uart, UART_IER); + uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC); + uart->scr = serial_read_reg(uart, UART_OMAP_SCR); + uart->wer = serial_read_reg(uart, UART_OMAP_WER); + serial_write_reg(uart, UART_LCR, 0x80); + uart->mcr = serial_read_reg(uart, UART_MCR); + serial_write_reg(uart, UART_LCR, lcr); uart->context_valid = 1; } @@ -248,7 +236,6 @@ static void omap_uart_save_context(struct omap_uart_state *uart) static void omap_uart_restore_context(struct omap_uart_state *uart) { u16 efr = 0; - struct plat_serial8250_port *p = uart->p; if (!enable_off_mode) return; @@ -261,29 +248,30 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) omap_uart_mdr1_errataset(uart, 0x07, 0xA0); else - serial_write_reg(p, UART_OMAP_MDR1, 0x7); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - efr = serial_read_reg(p, UART_EFR); - serial_write_reg(p, UART_EFR, UART_EFR_ECB); - serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(p, UART_IER, 0x0); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - serial_write_reg(p, UART_DLL, uart->dll); - serial_write_reg(p, UART_DLM, uart->dlh); - serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(p, UART_IER, uart->ier); - serial_write_reg(p, UART_LCR, 0x80); - serial_write_reg(p, UART_MCR, uart->mcr); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - serial_write_reg(p, UART_EFR, efr); - serial_write_reg(p, UART_LCR, UART_LCR_WLEN8); - serial_write_reg(p, UART_OMAP_SCR, uart->scr); - serial_write_reg(p, UART_OMAP_WER, uart->wer); - serial_write_reg(p, UART_OMAP_SYSC, uart->sysc); + serial_write_reg(uart, UART_OMAP_MDR1, 0x7); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + efr = serial_read_reg(uart, UART_EFR); + serial_write_reg(uart, UART_EFR, UART_EFR_ECB); + serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(uart, UART_IER, 0x0); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_DLL, uart->dll); + serial_write_reg(uart, UART_DLM, uart->dlh); + serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(uart, UART_IER, uart->ier); + serial_write_reg(uart, UART_LCR, 0x80); + serial_write_reg(uart, UART_MCR, uart->mcr); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_EFR, efr); + serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8); + serial_write_reg(uart, UART_OMAP_SCR, uart->scr); + serial_write_reg(uart, UART_OMAP_WER, uart->wer); + serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc); if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) omap_uart_mdr1_errataset(uart, 0x00, 0xA1); else - serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ + /* UART 16x mode */ + serial_write_reg(uart, UART_OMAP_MDR1, 0x00); } #else static inline void omap_uart_save_context(struct omap_uart_state *uart) {} @@ -295,8 +283,7 @@ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) if (uart->clocked) return; - clk_enable(uart->ick); - clk_enable(uart->fck); + omap_device_enable(uart->pdev); uart->clocked = 1; omap_uart_restore_context(uart); } @@ -310,8 +297,7 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) omap_uart_save_context(uart); uart->clocked = 0; - clk_disable(uart->ick); - clk_disable(uart->fck); + omap_device_idle(uart->pdev); } static void omap_uart_enable_wakeup(struct omap_uart_state *uart) @@ -349,18 +335,24 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart) } static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, - int enable) + int enable) { - struct plat_serial8250_port *p = uart->p; - u16 sysc; + u8 idlemode; - sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7; - if (enable) - sysc |= 0x2 << 3; - else - sysc |= 0x1 << 3; + if (enable) { + /** + * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests + * in Smartidle Mode When Configured for DMA Operations. + */ + if (uart->dma_enabled) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; + } else { + idlemode = HWMOD_IDLEMODE_NO; + } - serial_write_reg(p, UART_OMAP_SYSC, sysc); + omap_hwmod_set_slave_idlemode(uart->oh, idlemode); } static void omap_uart_block_sleep(struct omap_uart_state *uart) @@ -377,7 +369,7 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { - if (device_may_wakeup(&uart->pdev.dev)) + if (device_may_wakeup(&uart->pdev->dev)) omap_uart_enable_wakeup(uart); else omap_uart_disable_wakeup(uart); @@ -472,6 +464,7 @@ int omap_uart_can_sleep(void) * UART will not idle or sleep for its timeout period. * **/ +/* static int first_interrupt; */ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) { struct omap_uart_state *uart = dev_id; @@ -483,7 +476,6 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) static void omap_uart_idle_init(struct omap_uart_state *uart) { - struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; @@ -495,7 +487,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) omap_uart_smart_idle_enable(uart, 0); if (cpu_is_omap34xx()) { - u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD; + u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD; u32 wk_mask = 0; u32 padconf = 0; @@ -514,6 +506,10 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) wk_mask = OMAP3430_ST_UART3_MASK; padconf = 0x19e; break; + case 3: + wk_mask = OMAP3630_ST_UART4_MASK; + padconf = 0x0d2; + break; } uart->wk_mask = wk_mask; uart->padconf = padconf; @@ -546,9 +542,9 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - p->irqflags |= IRQF_SHARED; - ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, - "serial idle", (void *)uart); + uart->irqflags |= IRQF_SHARED; + ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); WARN_ON(ret); } @@ -558,11 +554,17 @@ void omap_uart_enable_irqs(int enable) struct omap_uart_state *uart; list_for_each_entry(uart, &uart_list, node) { - if (enable) - ret = request_irq(uart->p->irq, omap_uart_interrupt, - IRQF_SHARED, "serial idle", (void *)uart); - else - free_irq(uart->p->irq, (void *)uart); + if (enable) { + pm_runtime_put_sync(&uart->pdev->dev); + ret = request_threaded_irq(uart->irq, NULL, + omap_uart_interrupt, + IRQF_SHARED, + "serial idle", + (void *)uart); + } else { + pm_runtime_get_noresume(&uart->pdev->dev); + free_irq(uart->irq, (void *)uart); + } } } @@ -570,10 +572,9 @@ static ssize_t sleep_timeout_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_uart_state *uart = container_of(pdev, - struct omap_uart_state, pdev); + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *odev = to_omap_device(pdev); + struct omap_uart_state *uart = odev->hwmods[0]->dev_attr; return sprintf(buf, "%u\n", uart->timeout / HZ); } @@ -582,10 +583,9 @@ static ssize_t sleep_timeout_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_uart_state *uart = container_of(pdev, - struct omap_uart_state, pdev); + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *odev = to_omap_device(pdev); + struct omap_uart_state *uart = odev->hwmods[0]->dev_attr; unsigned int value; if (sscanf(buf, "%u", &value) != 1) { @@ -608,48 +608,11 @@ static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, #define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +static void omap_uart_block_sleep(struct omap_uart_state *uart) {} #define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct omap_uart_state omap_uart[] = { - { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data0, - }, - }, - }, { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = serial_platform_data1, - }, - }, - }, { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = serial_platform_data2, - }, - }, - }, -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - { - .pdev = { - .name = "serial8250", - .id = 3, - .dev = { - .platform_data = serial_platform_data3, - }, - }, - }, -#endif -}; - +#ifndef CONFIG_SERIAL_OMAP /* * Override the default 8250 read handler: mem_serial_in() * Empty RX fifo read causes an abort on omap3630 and omap4 @@ -682,71 +645,44 @@ static void serial_out_override(struct uart_port *up, int offset, int value) } __serial_write_reg(up, offset, value); } +#endif + void __init omap_serial_early_init(void) { - int i, nr_ports; - char name[16]; + int i = 0; - if (!(cpu_is_omap3630() || cpu_is_omap4430())) - nr_ports = 3; - else - nr_ports = ARRAY_SIZE(omap_uart); + do { + char oh_name[MAX_UART_HWMOD_NAME_LEN]; + struct omap_hwmod *oh; + struct omap_uart_state *uart; - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ + snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN, + "uart%d", i + 1); + oh = omap_hwmod_lookup(oh_name); + if (!oh) + break; - for (i = 0; i < nr_ports; i++) { - struct omap_uart_state *uart = &omap_uart[i]; - struct platform_device *pdev = &uart->pdev; - struct device *dev = &pdev->dev; - struct plat_serial8250_port *p = dev->platform_data; + uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL); + if (WARN_ON(!uart)) + return; + + uart->oh = oh; + uart->num = i++; + list_add_tail(&uart->node, &uart_list); + num_uarts++; - /* Don't map zero-based physical address */ - if (p->mapbase == 0) { - dev_warn(dev, "no physical address for uart#%d," - " so skipping early_init...\n", i); - continue; - } /* - * Module 4KB + L4 interconnect 4KB - * Static mapping, never released + * NOTE: omap_hwmod_init() has not yet been called, + * so no hwmod functions will work yet. */ - p->membase = ioremap(p->mapbase, SZ_8K); - if (!p->membase) { - dev_err(dev, "ioremap failed for uart%i\n", i + 1); - continue; - } - - sprintf(name, "uart%d_ick", i + 1); - uart->ick = clk_get(NULL, name); - if (IS_ERR(uart->ick)) { - dev_err(dev, "Could not get uart%d_ick\n", i + 1); - uart->ick = NULL; - } - - sprintf(name, "uart%d_fck", i+1); - uart->fck = clk_get(NULL, name); - if (IS_ERR(uart->fck)) { - dev_err(dev, "Could not get uart%d_fck\n", i + 1); - uart->fck = NULL; - } - - /* FIXME: Remove this once the clkdev is ready */ - if (!cpu_is_omap44xx()) { - if (!uart->ick || !uart->fck) - continue; - } - - uart->num = i; - p->private_data = uart; - uart->p = p; - if (cpu_is_omap44xx()) - p->irq += 32; - } + /* + * During UART early init, device need to be probed + * to determine SoC specific init before omap_device + * is ready. Therefore, don't allow idle here + */ + uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; + } while (1); } /** @@ -763,53 +699,135 @@ void __init omap_serial_early_init(void) void __init omap_serial_init_port(int port) { struct omap_uart_state *uart; - struct platform_device *pdev; - struct device *dev; - - BUG_ON(port < 0); - BUG_ON(port >= ARRAY_SIZE(omap_uart)); - - uart = &omap_uart[port]; - pdev = &uart->pdev; - dev = &pdev->dev; + struct omap_hwmod *oh; + struct omap_device *od; + void *pdata = NULL; + u32 pdata_size = 0; + char *name; +#ifndef CONFIG_SERIAL_OMAP + struct plat_serial8250_port ports[2] = { + {}, + {.flags = 0}, + }; + struct plat_serial8250_port *p = &ports[0]; +#else + struct omap_uart_port_info omap_up; +#endif - /* Don't proceed if there's no clocks available */ - if (unlikely(!uart->ick || !uart->fck)) { - WARN(1, "%s: can't init uart%d, no clocks available\n", - kobject_name(&dev->kobj), port); + if (WARN_ON(port < 0)) + return; + if (WARN_ON(port >= num_uarts)) return; - } - - omap_uart_enable_clocks(uart); - - omap_uart_reset(uart); - omap_uart_idle_init(uart); - list_add_tail(&uart->node, &uart_list); + list_for_each_entry(uart, &uart_list, node) + if (port == uart->num) + break; - if (WARN_ON(platform_device_register(pdev))) - return; + oh = uart->oh; + uart->dma_enabled = 0; +#ifndef CONFIG_SERIAL_OMAP + name = "serial8250"; - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(dev, true); - DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); - } + /* + * !! 8250 driver does not use standard IORESOURCE* It + * has it's own custom pdata that can be taken from + * the hwmod resource data. But, this needs to be + * done after the build. + * + * ?? does it have to be done before the register ?? + * YES, because platform_device_data_add() copies + * pdata, it does not use a pointer. + */ + p->flags = UPF_BOOT_AUTOCONF; + p->iotype = UPIO_MEM; + p->regshift = 2; + p->uartclk = OMAP24XX_BASE_BAUD * 16; + p->irq = oh->mpu_irqs[0].irq; + p->mapbase = oh->slaves[0]->addr->pa_start; + p->membase = omap_hwmod_get_mpu_rt_va(oh); + p->irqflags = IRQF_SHARED; + p->private_data = uart; /* * omap44xx: Never read empty UART fifo * omap3xxx: Never read empty UART fifo on UARTs * with IP rev >=0x52 */ + uart->regshift = p->regshift; + uart->membase = p->membase; if (cpu_is_omap44xx()) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; - else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF) >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) { - uart->p->serial_in = serial_in_override; - uart->p->serial_out = serial_out_override; + p->serial_in = serial_in_override; + p->serial_out = serial_out_override; + } + + pdata = &ports[0]; + pdata_size = 2 * sizeof(struct plat_serial8250_port); +#else + + name = DRIVER_NAME; + + omap_up.dma_enabled = uart->dma_enabled; + omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; + omap_up.mapbase = oh->slaves[0]->addr->pa_start; + omap_up.membase = omap_hwmod_get_mpu_rt_va(oh); + omap_up.irqflags = IRQF_SHARED; + omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + + pdata = &omap_up; + pdata_size = sizeof(struct omap_uart_port_info); +#endif + + if (WARN_ON(!oh)) + return; + + od = omap_device_build(name, uart->num, oh, pdata, pdata_size, + omap_uart_latency, + ARRAY_SIZE(omap_uart_latency), false); + WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n", + name, oh->name); + + uart->irq = oh->mpu_irqs[0].irq; + uart->regshift = 2; + uart->mapbase = oh->slaves[0]->addr->pa_start; + uart->membase = omap_hwmod_get_mpu_rt_va(oh); + uart->pdev = &od->pdev; + + oh->dev_attr = uart; + + /* + * Because of early UART probing, UART did not get idled + * on init. Now that omap_device is ready, ensure full idle + * before doing omap_device_enable(). + */ + omap_hwmod_idle(uart->oh); + + omap_device_enable(uart->pdev); + omap_uart_idle_init(uart); + omap_uart_reset(uart); + omap_hwmod_enable_wakeup(uart->oh); + omap_device_idle(uart->pdev); + + /* + * Need to block sleep long enough for interrupt driven + * driver to start. Console driver is in polling mode + * so device needs to be kept enabled while polling driver + * is in use. + */ + if (uart->timeout) + uart->timeout = (30 * HZ); + omap_uart_block_sleep(uart); + uart->timeout = DEFAULT_TIMEOUT; + + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(&od->pdev.dev, true); + DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout); } /* Enable the MDR1 errata for OMAP3 */ @@ -826,13 +844,8 @@ void __init omap_serial_init_port(int port) */ void __init omap_serial_init(void) { - int i, nr_ports; - - if (!(cpu_is_omap3630() || cpu_is_omap4430())) - nr_ports = 3; - else - nr_ports = ARRAY_SIZE(omap_uart); + struct omap_uart_state *uart; - for (i = 0; i < nr_ports; i++) - omap_serial_init_port(i); + list_for_each_entry(uart, &uart_list, node) + omap_serial_init_port(uart->num); } diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 7d668b3b5363..947de3fb93f3 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -257,7 +257,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) omap2_set_globals_sdrc(omap2_globals); omap2_set_globals_control(omap2_globals); omap2_set_globals_prcm(omap2_globals); - omap2_set_globals_uart(omap2_globals); } #endif @@ -272,9 +271,6 @@ static struct omap_globals omap242x_globals = { .ctrl = OMAP2420_CTRL_BASE, .prm = OMAP2420_PRM_BASE, .cm = OMAP2420_CM_BASE, - .uart1_phys = OMAP2_UART1_BASE, - .uart2_phys = OMAP2_UART2_BASE, - .uart3_phys = OMAP2_UART3_BASE, }; void __init omap2_set_globals_242x(void) @@ -293,9 +289,6 @@ static struct omap_globals omap243x_globals = { .ctrl = OMAP243X_CTRL_BASE, .prm = OMAP2430_PRM_BASE, .cm = OMAP2430_CM_BASE, - .uart1_phys = OMAP2_UART1_BASE, - .uart2_phys = OMAP2_UART2_BASE, - .uart3_phys = OMAP2_UART3_BASE, }; void __init omap2_set_globals_243x(void) @@ -314,10 +307,6 @@ static struct omap_globals omap3_globals = { .ctrl = OMAP343X_CTRL_BASE, .prm = OMAP3430_PRM_BASE, .cm = OMAP3430_CM_BASE, - .uart1_phys = OMAP3_UART1_BASE, - .uart2_phys = OMAP3_UART2_BASE, - .uart3_phys = OMAP3_UART3_BASE, - .uart4_phys = OMAP3_UART4_BASE, /* Only on 3630 */ }; void __init omap2_set_globals_3xxx(void) @@ -341,10 +330,6 @@ static struct omap_globals omap4_globals = { .prm = OMAP4430_PRM_BASE, .cm = OMAP4430_CM_BASE, .cm2 = OMAP4430_CM2_BASE, - .uart1_phys = OMAP4_UART1_BASE, - .uart2_phys = OMAP4_UART2_BASE, - .uart3_phys = OMAP4_UART3_BASE, - .uart4_phys = OMAP4_UART4_BASE, }; void __init omap2_set_globals_443x(void) @@ -352,7 +337,6 @@ void __init omap2_set_globals_443x(void) omap2_set_globals_tap(&omap4_globals); omap2_set_globals_control(&omap4_globals); omap2_set_globals_prcm(&omap4_globals); - omap2_set_globals_uart(&omap4_globals); } #endif diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index d1920be7833b..8e88e0e5d524 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -232,46 +232,6 @@ static void omap_init_uwire(void) static inline void omap_init_uwire(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) - -static struct resource wdt_resources[] = { - { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt(void) -{ - if (cpu_is_omap16xx()) - wdt_resources[0].start = 0xfffeb000; - else if (cpu_is_omap2420()) - wdt_resources[0].start = 0x48022000; /* WDT2 */ - else if (cpu_is_omap2430()) - wdt_resources[0].start = 0x49016000; /* WDT2 */ - else if (cpu_is_omap343x()) - wdt_resources[0].start = 0x48314000; /* WDT2 */ - else if (cpu_is_omap44xx()) - wdt_resources[0].start = 0x4a314000; - else - return; - - wdt_resources[0].end = wdt_resources[0].start + 0x4f; - - (void) platform_device_register(&omap_wdt_device); -} -#else -static inline void omap_init_wdt(void) {} -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -300,7 +260,6 @@ static int __init omap_init_devices(void) omap_init_rng(); omap_init_mcpdm(); omap_init_uwire(); - omap_init_wdt(); return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 2d8f98d7ae50..a9d69a09920d 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -67,7 +67,6 @@ void omap2_set_globals_tap(struct omap_globals *); void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); -void omap2_set_globals_uart(struct omap_globals *); void omap3_map_io(void); diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index af3a03941add..098f154f5d41 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -319,6 +319,8 @@ #define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ #define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ +#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ +#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index c01d9f08a198..65e20a686713 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -345,6 +345,8 @@ #define INT_34XX_MMC3_IRQ 94 #define INT_34XX_GPT12_IRQ 95 +#define INT_36XX_UART4_IRQ 80 + #define INT_35XX_HECC0_IRQ 24 #define INT_35XX_HECC1_IRQ 28 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h new file mode 100644 index 000000000000..0d6f076cf748 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -0,0 +1,129 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R <govindraj.raja@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __OMAP_SERIAL_H__ +#define __OMAP_SERIAL_H__ + +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <plat/control.h> +#include <plat/mux.h> + +#define DRIVER_NAME "omap-hsuart" + +/* + * Use tty device name as ttyO, [O -> OMAP] + * in bootargs we specify as console=ttyO0 if uart1 + * is used as console uart. + */ +#define OMAP_SERIAL_NAME "ttyO" + +#define OMAP_MDR1_DISABLE 0x07 +#define OMAP_MDR1_MODE13X 0x03 +#define OMAP_MDR1_MODE16X 0x00 +#define OMAP_MODE13X_SPEED 230400 + +/* + * LCR = 0XBF: Switch to Configuration Mode B. + * In configuration mode b allow access + * to EFR,DLL,DLH. + * Reference OMAP TRM Chapter 17 + * Section: 1.4.3 Mode Selection + */ +#define OMAP_UART_LCR_CONF_MDB 0XBF + +/* WER = 0x7F + * Enable module level wakeup in WER reg + */ +#define OMAP_UART_WER_MOD_WKUP 0X7F + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x04 + +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x04 + +#define OMAP_UART_SYSC_RESET 0X07 +#define OMAP_UART_TCR_TRIG 0X0F +#define OMAP_UART_SW_CLR 0XF0 +#define OMAP_UART_FIFO_CLR 0X06 + +#define OMAP_UART_DMA_CH_FREE -1 + +#define RX_TIMEOUT (3 * HZ) +#define OMAP_MAX_HSUART_PORTS 4 + +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + +struct omap_uart_port_info { + bool dma_enabled; /* To specify DMA Mode */ + unsigned int uartclk; /* UART clock rate */ + void __iomem *membase; /* ioremap cookie or NULL */ + resource_size_t mapbase; /* resource base */ + unsigned long irqflags; /* request_irq flags */ + upf_t flags; /* UPF_* flags */ +}; + +struct uart_omap_dma { + u8 uart_dma_tx; + u8 uart_dma_rx; + int rx_dma_channel; + int tx_dma_channel; + dma_addr_t rx_buf_dma_phys; + dma_addr_t tx_buf_dma_phys; + unsigned int uart_base; + /* + * Buffer for rx dma.It is not required for tx because the buffer + * comes from port structure. + */ + unsigned char *rx_buf; + unsigned int prev_rx_dma_pos; + int tx_buf_size; + int tx_dma_used; + int rx_dma_used; + spinlock_t tx_lock; + spinlock_t rx_lock; + /* timer to poll activity on rx dma */ + struct timer_list rx_timer; + int rx_buf_size; + int rx_timeout; +}; + +struct uart_omap_port { + struct uart_port port; + struct uart_omap_dma uart_dma; + struct platform_device *pdev; + + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char fcr; + unsigned char efr; + + int use_dma; + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ + unsigned int lsr_break_flag; + unsigned char msr_saved_flags; + char name[20]; + unsigned long port_activity; +}; + +#endif /* __OMAP_SERIAL_H__ */ |
