summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/ia64/Kconfig13
-rw-r--r--arch/ia64/configs/sn2_defconfig2
-rw-r--r--arch/ia64/defconfig2
-rw-r--r--arch/ia64/kernel/ivt.S63
-rw-r--r--arch/ia64/sn/kernel/setup.c157
-rw-r--r--arch/sparc64/kernel/setup.c19
-rw-r--r--arch/sparc64/kernel/smp.c1
7 files changed, 233 insertions, 24 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index d4de8a4814be..8796e12c56f3 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -164,6 +164,19 @@ config IA64_PAGE_SIZE_64KB
endchoice
+choice
+ prompt "Page Table Levels"
+ default PGTABLE_3
+
+config PGTABLE_3
+ bool "3 Levels"
+
+config PGTABLE_4
+ depends on !IA64_PAGE_SIZE_64KB
+ bool "4 Levels"
+
+endchoice
+
source kernel/Kconfig.hz
config IA64_BRL_EMU
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 08112ab38468..87cfd31a4a39 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -80,6 +80,8 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_PGTABLE_3 is not set
+CONFIG_PGTABLE_4=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 6e3f147e03e5..275a26c6e5aa 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -82,6 +82,8 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index c13ca0d49c4a..e06f21f60dc5 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -114,7 +114,7 @@ ENTRY(vhpt_miss)
shl r21=r16,3 // shift bit 60 into sign bit
shr.u r17=r16,61 // get the region number into r17
;;
- shr r22=r21,3
+ shr.u r22=r21,3
#ifdef CONFIG_HUGETLB_PAGE
extr.u r26=r25,2,6
;;
@@ -140,20 +140,34 @@ ENTRY(vhpt_miss)
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
- shr.u r18=r22,PMD_SHIFT // shift L2 index into position
+#ifdef CONFIG_PGTABLE_4
+ shr.u r28=r22,PUD_SHIFT // shift L2 index into position
+#else
+ shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+#endif
;;
ld8 r17=[r17] // fetch the L1 entry (may be 0)
;;
(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
- dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+#ifdef CONFIG_PGTABLE_4
+ dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+ ;;
+ shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0)
;;
-(p7) ld8 r20=[r17] // fetch the L2 entry (may be 0)
- shr.u r19=r22,PAGE_SHIFT // shift L3 index into position
+(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL?
+ dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+#else
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+#endif
;;
-(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L2 entry NULL?
- dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0)
+ shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
;;
-(p7) ld8 r18=[r21] // read the L3 PTE
+(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL?
+ dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
+ ;;
+(p7) ld8 r18=[r21] // read the L4 PTE
mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss
;;
(p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared?
@@ -192,14 +206,21 @@ ENTRY(vhpt_miss)
* between reading the pagetable and the "itc". If so, flush the entry we
* inserted and retry.
*/
- ld8 r25=[r21] // read L3 PTE again
- ld8 r26=[r17] // read L2 entry again
+ ld8 r25=[r21] // read L4 entry again
+ ld8 r26=[r17] // read L3 PTE again
+#ifdef CONFIG_PGTABLE_4
+ ld8 r18=[r28] // read L2 entry again
+#endif
+ cmp.ne p6,p7=r0,r0
;;
- cmp.ne p6,p7=r26,r20 // did L2 entry change
+ cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change
+#ifdef CONFIG_PGTABLE_4
+ cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change
+#endif
mov r27=PAGE_SHIFT<<2
;;
(p6) ptc.l r22,r27 // purge PTE page translation
-(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L3 PTE change
+(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change
;;
(p6) ptc.l r16,r27 // purge translation
#endif
@@ -432,18 +453,30 @@ ENTRY(nested_dtlb_miss)
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
- shr.u r18=r22,PMD_SHIFT // shift L2 index into position
+#ifdef CONFIG_PGTABLE_4
+ shr.u r18=r22,PUD_SHIFT // shift L2 index into position
+#else
+ shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+#endif
;;
ld8 r17=[r17] // fetch the L1 entry (may be 0)
;;
(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
;;
+#ifdef CONFIG_PGTABLE_4
(p7) ld8 r17=[r17] // fetch the L2 entry (may be 0)
- shr.u r19=r22,PAGE_SHIFT // shift L3 index into position
+ shr.u r18=r22,PMD_SHIFT // shift L3 index into position
;;
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL?
- dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+ ;;
+#endif
+(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0)
+ shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
+ ;;
+(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL?
+ dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
(p6) br.cond.spnt page_fault
mov b0=r30
br.sptk.many b0 // return to continuation point
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 0fb579ef18c2..e510dce9971f 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -30,6 +30,7 @@
#include <linux/root_dev.h>
#include <linux/nodemask.h>
#include <linux/pm.h>
+#include <linux/efi.h>
#include <asm/io.h>
#include <asm/sal.h>
@@ -242,6 +243,135 @@ static void __init sn_check_for_wars(void)
}
}
+/*
+ * Scan the EFI PCDP table (if it exists) for an acceptable VGA console
+ * output device. If one exists, pick it and set sn_legacy_{io,mem} to
+ * reflect the bus offsets needed to address it.
+ *
+ * Since pcdp support in SN is not supported in the 2.4 kernel (or at least
+ * the one lbs is based on) just declare the needed structs here.
+ *
+ * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ *
+ * Returns 0 if no acceptable vga is found, !0 otherwise.
+ *
+ * Note: This stuff is duped here because Altix requires the PCDP to
+ * locate a usable VGA device due to lack of proper ACPI support. Structures
+ * could be used from drivers/firmware/pcdp.h, but it was decided that moving
+ * this file to a more public location just for Altix use was undesireable.
+ */
+
+struct hcdp_uart_desc {
+ u8 pad[45];
+};
+
+struct pcdp {
+ u8 signature[4]; /* should be 'HCDP' */
+ u32 length;
+ u8 rev; /* should be >=3 for pcdp, <3 for hcdp */
+ u8 sum;
+ u8 oem_id[6];
+ u64 oem_tableid;
+ u32 oem_rev;
+ u32 creator_id;
+ u32 creator_rev;
+ u32 num_type0;
+ struct hcdp_uart_desc uart[0]; /* num_type0 of these */
+ /* pcdp descriptors follow */
+} __attribute__((packed));
+
+struct pcdp_device_desc {
+ u8 type;
+ u8 primary;
+ u16 length;
+ u16 index;
+ /* interconnect specific structure follows */
+ /* device specific structure follows that */
+} __attribute__((packed));
+
+struct pcdp_interface_pci {
+ u8 type; /* 1 == pci */
+ u8 reserved;
+ u16 length;
+ u8 segment;
+ u8 bus;
+ u8 dev;
+ u8 fun;
+ u16 devid;
+ u16 vendid;
+ u32 acpi_interrupt;
+ u64 mmio_tra;
+ u64 ioport_tra;
+ u8 flags;
+ u8 translation;
+} __attribute__((packed));
+
+struct pcdp_vga_device {
+ u8 num_eas_desc;
+ /* ACPI Extended Address Space Desc follows */
+} __attribute__((packed));
+
+/* from pcdp_device_desc.primary */
+#define PCDP_PRIMARY_CONSOLE 0x01
+
+/* from pcdp_device_desc.type */
+#define PCDP_CONSOLE_INOUT 0x0
+#define PCDP_CONSOLE_DEBUG 0x1
+#define PCDP_CONSOLE_OUT 0x2
+#define PCDP_CONSOLE_IN 0x3
+#define PCDP_CONSOLE_TYPE_VGA 0x8
+
+#define PCDP_CONSOLE_VGA (PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT)
+
+/* from pcdp_interface_pci.type */
+#define PCDP_IF_PCI 1
+
+/* from pcdp_interface_pci.translation */
+#define PCDP_PCI_TRANS_IOPORT 0x02
+#define PCDP_PCI_TRANS_MMIO 0x01
+
+static void
+sn_scan_pcdp(void)
+{
+ u8 *bp;
+ struct pcdp *pcdp;
+ struct pcdp_device_desc device;
+ struct pcdp_interface_pci if_pci;
+ extern struct efi efi;
+
+ pcdp = efi.hcdp;
+ if (! pcdp)
+ return; /* no hcdp/pcdp table */
+
+ if (pcdp->rev < 3)
+ return; /* only support PCDP (rev >= 3) */
+
+ for (bp = (u8 *)&pcdp->uart[pcdp->num_type0];
+ bp < (u8 *)pcdp + pcdp->length;
+ bp += device.length) {
+ memcpy(&device, bp, sizeof(device));
+ if (! (device.primary & PCDP_PRIMARY_CONSOLE))
+ continue; /* not primary console */
+
+ if (device.type != PCDP_CONSOLE_VGA)
+ continue; /* not VGA descriptor */
+
+ memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci));
+ if (if_pci.type != PCDP_IF_PCI)
+ continue; /* not PCI interconnect */
+
+ if (if_pci.translation & PCDP_PCI_TRANS_IOPORT)
+ vga_console_iobase =
+ if_pci.ioport_tra | __IA64_UNCACHED_OFFSET;
+
+ if (if_pci.translation & PCDP_PCI_TRANS_MMIO)
+ vga_console_membase =
+ if_pci.mmio_tra | __IA64_UNCACHED_OFFSET;
+
+ break; /* once we find the primary, we're done */
+ }
+}
+
/**
* sn_setup - SN platform setup routine
* @cmdline_p: kernel command line
@@ -263,16 +393,35 @@ void __init sn_setup(char **cmdline_p)
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
/*
- * If there was a primary vga adapter identified through the
- * EFI PCDP table, make it the preferred console. Otherwise
- * zero out conswitchp.
+ * Handle SN vga console.
+ *
+ * SN systems do not have enough ACPI table information
+ * being passed from prom to identify VGA adapters and the legacy
+ * addresses to access them. Until that is done, SN systems rely
+ * on the PCDP table to identify the primary VGA console if one
+ * exists.
+ *
+ * However, kernel PCDP support is optional, and even if it is built
+ * into the kernel, it will not be used if the boot cmdline contains
+ * console= directives.
+ *
+ * So, to work around this mess, we duplicate some of the PCDP code
+ * here so that the primary VGA console (as defined by PCDP) will
+ * work on SN systems even if a different console (e.g. serial) is
+ * selected on the boot line (or CONFIG_EFI_PCDP is off).
*/
+ if (! vga_console_membase)
+ sn_scan_pcdp();
+
if (vga_console_membase) {
/* usable vga ... make tty0 the preferred default console */
- add_preferred_console("tty", 0, NULL);
+ if (!strstr(*cmdline_p, "console="))
+ add_preferred_console("tty", 0, NULL);
} else {
printk(KERN_DEBUG "SGI: Disabling VGA console\n");
+ if (!strstr(*cmdline_p, "console="))
+ add_preferred_console("ttySG", 0, NULL);
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#else
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index bf1849dd9c49..48180531562f 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -587,6 +587,8 @@ extern void mmu_info(struct seq_file *);
unsigned int dcache_parity_tl1_occurred;
unsigned int icache_parity_tl1_occurred;
+static int ncpus_probed;
+
static int show_cpuinfo(struct seq_file *m, void *__unused)
{
seq_printf(m,
@@ -595,8 +597,8 @@ static int show_cpuinfo(struct seq_file *m, void *__unused)
"promlib\t\t: Version 3 Revision %d\n"
"prom\t\t: %d.%d.%d\n"
"type\t\t: sun4u\n"
- "ncpus probed\t: %ld\n"
- "ncpus active\t: %ld\n"
+ "ncpus probed\t: %d\n"
+ "ncpus active\t: %d\n"
"D$ parity tl1\t: %u\n"
"I$ parity tl1\t: %u\n"
#ifndef CONFIG_SMP
@@ -610,8 +612,8 @@ static int show_cpuinfo(struct seq_file *m, void *__unused)
prom_prev >> 16,
(prom_prev >> 8) & 0xff,
prom_prev & 0xff,
- (long)num_possible_cpus(),
- (long)num_online_cpus(),
+ ncpus_probed,
+ num_online_cpus(),
dcache_parity_tl1_occurred,
icache_parity_tl1_occurred
#ifndef CONFIG_SMP
@@ -677,6 +679,15 @@ static int __init topology_init(void)
int i, err;
err = -ENOMEM;
+
+ /* Count the number of physically present processors in
+ * the machine, even on uniprocessor, so that /proc/cpuinfo
+ * output is consistent with 2.4.x
+ */
+ ncpus_probed = 0;
+ while (!cpu_find_by_instance(ncpus_probed, NULL, NULL))
+ ncpus_probed++;
+
for (i = 0; i < NR_CPUS; i++) {
if (cpu_possible(i)) {
struct cpu *p = kmalloc(sizeof(*p), GFP_KERNEL);
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 797a65493fb8..6efc03df51c3 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -39,7 +39,6 @@
#include <asm/starfire.h>
#include <asm/tlb.h>
-extern int linux_num_cpus;
extern void calibrate_delay(void);
/* Please don't make this stuff initdata!!! --DaveM */
OpenPOWER on IntegriCloud