diff options
Diffstat (limited to 'arch')
45 files changed, 1515 insertions, 102 deletions
diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts new file mode 100644 index 000000000000..05a76ccfd499 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -0,0 +1,332 @@ +/* + * mpc8308_p1m Device Tree Source + * + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "denx,mpc8308_p1m"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + ranges = <0x0 0x0 0xfc000000 0x04000000 + 0x1 0x0 0xfbff0000 0x00008000 + 0x2 0x0 0xfbff8000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + read-only; + }; + env@60000 { + reg = <0x60000 0x20000>; + }; + env1@80000 { + reg = <0x80000 0x20000>; + }; + kernel@a0000 { + reg = <0xa0000 0x200000>; + }; + dtb@2a0000 { + reg = <0x2a0000 0x20000>; + }; + ramdisk@2c0000 { + reg = <0x2c0000 0x640000>; + }; + user@700000 { + reg = <0x700000 0x3900000>; + }; + }; + + can@1,0 { + compatible = "nxp,sja1000"; + reg = <0x1 0x0 0x80>; + interrupts = <18 0x8>; + interrups-parent = <&ipic>; + }; + + cpld@2,0 { + compatible = "denx,mpc8308_p1m-cpld"; + reg = <0x2 0x0 0x8>; + interrupts = <48 0x8>; + interrups-parent = <&ipic>; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8308-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + fram@50 { + compatible = "ramtron,24c64"; + reg = <0x50>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + pwm@28 { + compatible = "maxim,ds1050"; + reg = <0x28>; + }; + sensor@48 { + compatible = "maxim,max6625"; + reg = <0x48>; + }; + sensor@49 { + compatible = "maxim,max6625"; + reg = <0x49>; + }; + sensor@4b { + compatible = "maxim,max6625"; + reg = <0x4b>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy1 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy2 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + timer@500 { + compatible = "fsl,mpc8308-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 8bcb10b92677..2bbecbb4cbf9 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -148,6 +148,17 @@ label = "reserved-nand"; }; }; + + board-control@3,0 { + compatible = "fsl,p1022ds-pixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + /* + * IRQ8 is generated if the "EVENT" switch is pressed + * and PX_CTL[EVESEL] is set to 00. + */ + interrupts = <8 8>; + }; }; soc@fffe00000 { diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig new file mode 100644 index 000000000000..94d120ef99cf --- /dev/null +++ b/arch/powerpc/configs/e55xx_smp_defconfig @@ -0,0 +1,84 @@ +CONFIG_PPC64=y +CONFIG_PPC_BOOK3E_64=y +# CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_P5020_DS=y +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BINFMT_MISC=m +CONFIG_SPARSE_IRQ=y +# CONFIG_PCI is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_EEPROM_LEGACY=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_I2C=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_DMADEVICES=y +CONFIG_FSL_DMA=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_UTF8=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_LIBCRC32C=m +CONFIG_FRAME_WARN=1024 +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_VIRQ_DEBUG=y +CONFIG_CRYPTO=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig index 04ae0740b6d0..7bd1763877ba 100644 --- a/arch/powerpc/configs/ppc64e_defconfig +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -18,6 +18,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_P5020_DS=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -256,7 +257,6 @@ CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=m @@ -290,7 +290,6 @@ CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y -CONFIG_INOTIFY=y CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_UDF_FS=m @@ -384,7 +383,6 @@ CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_KHAZAD=m diff --git a/arch/powerpc/include/asm/fsl_85xx_cache_sram.h b/arch/powerpc/include/asm/fsl_85xx_cache_sram.h new file mode 100644 index 000000000000..2af2bdc37b2e --- /dev/null +++ b/arch/powerpc/include/asm/fsl_85xx_cache_sram.h @@ -0,0 +1,48 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * Cache SRAM handling for QorIQ platform + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + + * This file is derived from the original work done + * by Sylvain Munaut for the Bestcomm SRAM allocator. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_POWERPC_FSL_85XX_CACHE_SRAM_H__ +#define __ASM_POWERPC_FSL_85XX_CACHE_SRAM_H__ + +#include <asm/rheap.h> +#include <linux/spinlock.h> + +/* + * Cache-SRAM + */ + +struct mpc85xx_cache_sram { + phys_addr_t base_phys; + void *base_virt; + unsigned int size; + rh_info_t *rh; + spinlock_t lock; +}; + +extern void mpc85xx_cache_sram_free(void *ptr); +extern void *mpc85xx_cache_sram_alloc(unsigned int size, + phys_addr_t *phys, unsigned int align); + +#endif /* __AMS_POWERPC_FSL_85XX_CACHE_SRAM_H__ */ diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index 076327f2eff7..f54408d995b5 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -91,6 +91,7 @@ extern void machine_kexec_simple(struct kimage *image); extern void crash_kexec_secondary(struct pt_regs *regs); extern int overlaps_crashkernel(unsigned long start, unsigned long size); extern void reserve_crashkernel(void); +extern void machine_kexec_mask_interrupts(void); #else /* !CONFIG_KEXEC */ static inline int kexec_sr_activated(int cpu) { return 0; } diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 87a1d787c5b6..8eaed81ea642 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -114,6 +114,17 @@ #define MAS7_RPN 0xFFFFFFFF +/* Bit definitions for MMUCFG */ +#define MMUCFG_MAVN 0x00000003 /* MMU Architecture Version Number */ +#define MMUCFG_MAVN_V1 0x00000000 /* v1.0 */ +#define MMUCFG_MAVN_V2 0x00000001 /* v2.0 */ +#define MMUCFG_NTLBS 0x0000000c /* Number of TLBs */ +#define MMUCFG_PIDSIZE 0x000007c0 /* PID Reg Size */ +#define MMUCFG_TWC 0x00008000 /* TLB Write Conditional (v2.0) */ +#define MMUCFG_LRAT 0x00010000 /* LRAT Supported (v2.0) */ +#define MMUCFG_RASIZE 0x00fe0000 /* Real Addr Size */ +#define MMUCFG_LPIDSIZE 0x0f000000 /* LPID Reg Size */ + /* Bit definitions for MMUCSR0 */ #define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */ #define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */ @@ -133,6 +144,10 @@ #define TLBnCFG_GTWE 0x00010000 /* Guest can write */ #define TLBnCFG_IND 0x00020000 /* IND entries supported */ #define TLBnCFG_PT 0x00040000 /* Can load from page table */ +#define TLBnCFG_MINSIZE 0x00f00000 /* Minimum Page Size (v1.0) */ +#define TLBnCFG_MINSIZE_SHIFT 20 +#define TLBnCFG_MAXSIZE 0x000f0000 /* Maximum Page Size (v1.0) */ +#define TLBnCFG_MAXSIZE_SHIFT 16 #define TLBnCFG_ASSOC 0xff000000 /* Associativity */ /* TLBnPS encoding */ diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index f2b370180a09..76bb195e4f24 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -171,6 +171,13 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); /* Make modules code happy. We don't set RO yet */ #define PAGE_KERNEL_EXEC PAGE_KERNEL_X +/* + * Don't just check for any non zero bits in __PAGE_USER, since for book3e + * and PTE_64BIT, PAGE_KERNEL_X contains _PAGE_BAP_SR which is also in + * _PAGE_USER. Need to explictly match _PAGE_BAP_UR bit in that case too. + */ +#define pte_user(val) ((val & _PAGE_USER) == _PAGE_USER) + /* Advertise special mapping type for AGP */ #define PAGE_AGP (PAGE_KERNEL_NC) #define HAVE_PAGE_AGP diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 1dda70129141..4ed076a4db24 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -55,7 +55,9 @@ obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +ifeq ($(CONFIG_PPC32),y) obj-$(CONFIG_E500) += idle_e500.o +endif obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o obj-$(CONFIG_TAU) += tau_6xx.o obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o @@ -67,7 +69,7 @@ endif obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o +obj-$(CONFIG_PPC_FSL_BOOK3E) += cpu_setup_fsl_booke.o dbell.o obj-$(CONFIG_PPC_BOOK3E_64) += dbell.o extra-y := head_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index c63494090854..c3e01945ad4f 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -61,7 +61,7 @@ #endif #endif -#if defined(CONFIG_FSL_BOOKE) +#if defined(CONFIG_PPC_FSL_BOOK3E) #include "../mm/mmu_decl.h" #endif @@ -470,7 +470,7 @@ int main(void) DEFINE(PGD_T_LOG2, PGD_T_LOG2); DEFINE(PTE_T_LOG2, PTE_T_LOG2); #endif -#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_PPC_FSL_BOOK3E DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam)); DEFINE(TLBCAM_MAS0, offsetof(struct tlbcam, MAS0)); DEFINE(TLBCAM_MAS1, offsetof(struct tlbcam, MAS1)); diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index 0adb50ad8031..894e64fa481e 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -51,6 +51,7 @@ _GLOBAL(__e500_dcache_setup) isync blr +#ifdef CONFIG_PPC32 _GLOBAL(__setup_cpu_e200) /* enable dedicated debug exception handling resources (Debug APU) */ mfspr r3,SPRN_HID0 @@ -72,3 +73,17 @@ _GLOBAL(__setup_cpu_e500mc) bl __setup_e500mc_ivors mtlr r4 blr +#endif +/* Right now, restore and setup are the same thing */ +_GLOBAL(__restore_cpu_e5500) +_GLOBAL(__setup_cpu_e5500) + mflr r4 + bl __e500_icache_setup + bl __e500_dcache_setup +#ifdef CONFIG_PPC_BOOK3E_64 + bl .__setup_base_ivors +#else + bl __setup_e500mc_ivors +#endif + mtlr r4 + blr diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b7ac795e5270..96a908f1cd87 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -67,6 +67,10 @@ extern void __restore_cpu_ppc970(void); extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec); extern void __restore_cpu_power7(void); #endif /* CONFIG_PPC64 */ +#if defined(CONFIG_E500) +extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_e5500(void); +#endif /* CONFIG_E500 */ /* This table only contains "desktop" CPUs, it need to be filled with embedded * ones as well... @@ -1906,7 +1910,9 @@ static struct cpu_spec __initdata cpu_specs[] = { .platform = "ppc5554", } #endif /* CONFIG_E200 */ +#endif /* CONFIG_PPC32 */ #ifdef CONFIG_E500 +#ifdef CONFIG_PPC32 { /* e500 */ .pvr_mask = 0xffff0000, .pvr_value = 0x80200000, @@ -1961,6 +1967,26 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_e500mc, .platform = "ppce500mc", }, +#endif /* CONFIG_PPC32 */ + { /* e5500 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x80240000, + .cpu_name = "e5500", + .cpu_features = CPU_FTRS_E500MC, + .cpu_user_features = COMMON_USER_BOOKE, + .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | + MMU_FTR_USE_TLBILX, + .icache_bsize = 64, + .dcache_bsize = 64, + .num_pmcs = 4, + .oprofile_cpu_type = "ppc/e500mc", + .oprofile_type = PPC_OPROFILE_FSL_EMB, + .cpu_setup = __setup_cpu_e5500, + .cpu_restore = __restore_cpu_e5500, + .machine_check = machine_check_e500mc, + .platform = "ppce5500", + }, +#ifdef CONFIG_PPC32 { /* default match */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, @@ -1975,8 +2001,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_e500, .platform = "powerpc", } -#endif /* CONFIG_E500 */ #endif /* CONFIG_PPC32 */ +#endif /* CONFIG_E500 */ #ifdef CONFIG_PPC_BOOK3E_64 { /* This is a default entry to get going, to be replaced by diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 4457382f8667..832c8c4db254 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -414,18 +414,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs) crash_kexec_wait_realmode(crashing_cpu); #endif - for_each_irq(i) { - struct irq_desc *desc = irq_to_desc(i); - - if (!desc || !desc->chip || !desc->chip->eoi) - continue; - - if (desc->status & IRQ_INPROGRESS) - desc->chip->eoi(i); - - if (!(desc->status & IRQ_DISABLED)) - desc->chip->shutdown(i); - } + machine_kexec_mask_interrupts(); /* * Call registered shutdown routines savely. Swap out diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 4faeba247854..529b817f473b 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -152,8 +152,11 @@ _ENTRY(__early_start) /* Check to see if we're the second processor, and jump * to the secondary_start code if so */ - mfspr r24,SPRN_PIR - cmpwi r24,0 + lis r24, boot_cpuid@h + ori r24, r24, boot_cpuid@l + lwz r24, 0(r24) + cmpwi r24, -1 + mfspr r24,SPRN_PIR bne __secondary_start #endif @@ -175,6 +178,9 @@ _ENTRY(__early_start) li r0,0 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) + rlwinm r22,r1,0,0,31-THREAD_SHIFT /* current thread_info */ + stw r24, TI_CPU(r22) + bl early_init #ifdef CONFIG_RELOCATABLE diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index dd6c141f1662..df7e20c191cd 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -14,10 +14,34 @@ #include <linux/threads.h> #include <linux/memblock.h> #include <linux/of.h> +#include <linux/irq.h> + #include <asm/machdep.h> #include <asm/prom.h> #include <asm/sections.h> +void machine_kexec_mask_interrupts(void) { + unsigned int i; + + for_each_irq(i) { + struct irq_desc *desc = irq_to_desc(i); + + if (!desc || !desc->chip) + continue; + + if (desc->chip->eoi && + desc->status & IRQ_INPROGRESS) + desc->chip->eoi(i); + + if (desc->chip->mask) + desc->chip->mask(i); + + if (desc->chip->disable && + !(desc->status & IRQ_DISABLED)) + desc->chip->disable(i); + } +} + void machine_crash_shutdown(struct pt_regs *regs) { if (ppc_md.machine_crash_shutdown) diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c index ae63a964b858..e63f2e7d2efb 100644 --- a/arch/powerpc/kernel/machine_kexec_32.c +++ b/arch/powerpc/kernel/machine_kexec_32.c @@ -39,6 +39,10 @@ void default_machine_kexec(struct kimage *image) /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); + /* mask each interrupt so we are in a more sane state for the + * kexec kernel */ + machine_kexec_mask_interrupts(); + page_list = image->head; /* we need both effective and real address here */ diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 1e068a46e6c3..cefc0df8f1e5 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -108,7 +108,7 @@ static void free_lppacas(void) #else -static inline void allocate_lppacas(int, unsigned long) { } +static inline void allocate_lppacas(int nr_cpus, unsigned long limit) { } static inline void free_lppacas(void) { } #endif /* CONFIG_PPC_BOOK3S */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 93666f9cabf1..8da1632f9fe7 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -46,7 +46,7 @@ extern void bootx_init(unsigned long r4, unsigned long phys); -int boot_cpuid; +int boot_cpuid = -1; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index bcb738b9ff8c..644f9188d8e7 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -161,8 +161,9 @@ extern struct timezone sys_tz; static long timezone_offset; unsigned long ppc_proc_freq; -EXPORT_SYMBOL(ppc_proc_freq); +EXPORT_SYMBOL_GPL(ppc_proc_freq); unsigned long ppc_tb_freq; +EXPORT_SYMBOL_GPL(ppc_tb_freq); #ifdef CONFIG_VIRT_CPU_ACCOUNTING /* diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index a45a63c3a0c7..1b2cdc8eec90 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -538,6 +538,11 @@ int machine_check_e500(struct pt_regs *regs) return 0; } + +int machine_check_generic(struct pt_regs *regs) +{ + return 0; +} #elif defined(CONFIG_E200) int machine_check_e200(struct pt_regs *regs) { diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 53102f306880..bdca46e08382 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ mmu_context_hash$(CONFIG_WORD_SIZE).o obj-$(CONFIG_40x) += 40x_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o -obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o +obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke_mmu.o obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_PPC_MM_SLICES) += slice.o ifeq ($(CONFIG_HUGETLB_PAGE),y) diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 4b66a1ece6d8..67bc8a7c7e0b 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -56,11 +56,6 @@ unsigned int tlbcam_index; - -#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) -#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" -#endif - #define NUM_TLBCAMS (64) struct tlbcam TLBCAM[NUM_TLBCAMS]; @@ -137,7 +132,8 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, if (mmu_has_feature(MMU_FTR_BIG_PHYS)) TLBCAM[index].MAS7 = (u64)phys >> 32; - if (flags & _PAGE_USER) { + /* Below is unlikely -- only for large user pages or similar */ + if (pte_user(flags)) { TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); } @@ -184,6 +180,12 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) return amount_mapped; } +#ifdef CONFIG_PPC32 + +#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) +#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" +#endif + unsigned long __init mmu_mapin_ram(unsigned long top) { return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1; @@ -215,3 +217,4 @@ void __init adjust_total_lowmem(void) __initial_memory_limit_addr = memstart_addr + __max_low_memory; } +#endif diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 63b84a0d3b10..dd0a2589591d 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -140,10 +140,13 @@ extern void wii_memory_fixups(void); extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); -#elif defined(CONFIG_FSL_BOOKE) +#elif defined(CONFIG_PPC_FSL_BOOK3E) +extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx); +#ifdef CONFIG_PPC32 extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); +#endif extern void loadcam_entry(unsigned int index); struct tlbcam { diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index fe391e942521..61fe32a256da 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -349,11 +349,47 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) static void setup_page_sizes(void) { - unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); - unsigned int tlb0ps = mfspr(SPRN_TLB0PS); - unsigned int eptcfg = mfspr(SPRN_EPTCFG); + unsigned int tlb0cfg; + unsigned int tlb0ps; + unsigned int eptcfg; int i, psize; +#ifdef CONFIG_PPC_FSL_BOOK3E + unsigned int mmucfg = mfspr(SPRN_MMUCFG); + + if (((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) && + (mmu_has_feature(MMU_FTR_TYPE_FSL_E))) { + unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG); + unsigned int min_pg, max_pg; + + min_pg = (tlb1cfg & TLBnCFG_MINSIZE) >> TLBnCFG_MINSIZE_SHIFT; + max_pg = (tlb1cfg & TLBnCFG_MAXSIZE) >> TLBnCFG_MAXSIZE_SHIFT; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def; + unsigned int shift; + + def = &mmu_psize_defs[psize]; + shift = def->shift; + + if (shift == 0) + continue; + + /* adjust to be in terms of 4^shift Kb */ + shift = (shift - 10) >> 1; + + if ((shift >= min_pg) && (shift <= max_pg)) + def->flags |= MMU_PAGE_SIZE_DIRECT; + } + + goto no_indirect; + } +#endif + + tlb0cfg = mfspr(SPRN_TLB0CFG); + tlb0ps = mfspr(SPRN_TLB0PS); + eptcfg = mfspr(SPRN_EPTCFG); + /* Look for supported direct sizes */ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { struct mmu_psize_def *def = &mmu_psize_defs[psize]; @@ -505,6 +541,20 @@ static void __early_init_mmu(int boot_cpu) */ linear_map_top = memblock_end_of_DRAM(); +#ifdef CONFIG_PPC_FSL_BOOK3E + if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { + unsigned int num_cams; + + /* use a quarter of the TLBCAM for bolted linear map */ + num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; + linear_map_top = map_mem_in_cams(linear_map_top, num_cams); + + /* limit memory so we dont have linear faults */ + memblock_enforce_memory_limit(linear_map_top); + memblock_analyze(); + } +#endif + /* A sync won't hurt us after mucking around with * the MMU configuration */ diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index b9d9fed8f36e..af405eefe48d 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -367,7 +367,7 @@ _GLOBAL(set_context) #error Unsupported processor type ! #endif -#if defined(CONFIG_FSL_BOOKE) +#if defined(CONFIG_PPC_FSL_BOOK3E) /* * extern void loadcam_entry(unsigned int index) * diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c index 62312abffa28..d4e6507277b5 100644 --- a/arch/powerpc/oprofile/op_model_fsl_emb.c +++ b/arch/powerpc/oprofile/op_model_fsl_emb.c @@ -2,7 +2,7 @@ * Freescale Embedded oprofile support, based on ppc64 oprofile support * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM * - * Copyright (c) 2004 Freescale Semiconductor, Inc + * Copyright (c) 2004, 2010 Freescale Semiconductor, Inc * * Author: Andy Fleming * Maintainer: Kumar Gala <galak@kernel.crashing.org> @@ -321,9 +321,6 @@ static void fsl_emb_handle_interrupt(struct pt_regs *regs, int val; int i; - /* set the PMM bit (see comment below) */ - mtmsr(mfmsr() | MSR_PMM); - pc = regs->nip; is_kernel = is_kernel_addr(pc); @@ -340,9 +337,13 @@ static void fsl_emb_handle_interrupt(struct pt_regs *regs, } /* The freeze bit was set by the interrupt. */ - /* Clear the freeze bit, and reenable the interrupt. - * The counters won't actually start until the rfi clears - * the PMM bit */ + /* Clear the freeze bit, and reenable the interrupt. The + * counters won't actually start until the rfi clears the PMM + * bit. The PMM bit should not be set until after the interrupt + * is cleared to avoid it getting lost in some hypervisor + * environments. + */ + mtmsr(mfmsr() | MSR_PMM); pmc_start_ctrs(1); } diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 021763a32c2f..73f4135f3a1a 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -10,12 +10,12 @@ menuconfig PPC_83xx if PPC_83xx config MPC830x_RDB - bool "Freescale MPC830x RDB" + bool "Freescale MPC830x RDB and derivatives" select DEFAULT_UIMAGE select PPC_MPC831x select FSL_GTM help - This option enables support for the MPC8308 RDB board. + This option enables support for the MPC8308 RDB and MPC8308 P1M boards. config MPC831x_RDB bool "Freescale MPC831x RDB" diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c index ac102ee9abe8..846831d495b5 100644 --- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c @@ -65,7 +65,8 @@ static int __init mpc830x_rdb_probe(void) unsigned long root = of_get_flat_dt_root(); return of_flat_dt_is_compatible(root, "MPC8308RDB") || - of_flat_dt_is_compatible(root, "fsl,mpc8308rdb"); + of_flat_dt_is_compatible(root, "fsl,mpc8308rdb") || + of_flat_dt_is_compatible(root, "denx,mpc8308_p1m"); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index bea1f5905ad4..b6976e1726e4 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -11,6 +11,8 @@ menuconfig FSL_SOC_BOOKE if FSL_SOC_BOOKE +if PPC32 + config MPC8540_ADS bool "Freescale MPC8540 ADS" select DEFAULT_UIMAGE @@ -153,10 +155,20 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board +config P3041_DS + bool "Freescale P3041 DS" + select DEFAULT_UIMAGE + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select MPC8xxx_GPIO + select HAS_RAPIDIO + help + This option enables support for the P3041 DS board + config P4080_DS bool "Freescale P4080 DS" select DEFAULT_UIMAGE - select PPC_FSL_BOOK3E select PPC_E500MC select PHYS_64BIT select SWIOTLB @@ -165,6 +177,20 @@ config P4080_DS help This option enables support for the P4080 DS board +endif # PPC32 + +config P5020_DS + bool "Freescale P5020 DS" + select DEFAULT_UIMAGE + select E500 + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select MPC8xxx_GPIO + select HAS_RAPIDIO + help + This option enables support for the P5020 DS board + endif # FSL_SOC_BOOKE config TQM85xx diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index a2ec3f8f4d06..dd70db77d63e 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -11,7 +11,9 @@ obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o +obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o +obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8560) += sbc8560.o diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 34e00902ce86..2b390d19a1d1 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -112,6 +112,8 @@ static struct of_device_id __initdata p1022_ds_ids[] = { { .compatible = "soc", }, { .compatible = "simple-bus", }, { .compatible = "gianfar", }, + /* So that the DMA channel nodes can be probed individually: */ + { .compatible = "fsl,eloplus-dma", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/p3041_ds.c b/arch/powerpc/platforms/85xx/p3041_ds.c new file mode 100644 index 000000000000..0ed52e18298c --- /dev/null +++ b/arch/powerpc/platforms/85xx/p3041_ds.c @@ -0,0 +1,64 @@ +/* + * P3041 DS Setup + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2009-2010 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/phy.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "corenet_ds.h" + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p3041_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P3041DS"); +} + +define_machine(p3041_ds) { + .name = "P3041 DS", + .probe = p3041_ds_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_coreint_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +machine_device_initcall(p3041_ds, corenet_ds_publish_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier); +#endif diff --git a/arch/powerpc/platforms/85xx/p5020_ds.c b/arch/powerpc/platforms/85xx/p5020_ds.c new file mode 100644 index 000000000000..7467b712ee00 --- /dev/null +++ b/arch/powerpc/platforms/85xx/p5020_ds.c @@ -0,0 +1,69 @@ +/* + * P5020 DS Setup + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2009-2010 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/phy.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "corenet_ds.h" + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p5020_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P5020DS"); +} + +define_machine(p5020_ds) { + .name = "P5020 DS", + .probe = p5020_ds_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +/* coreint doesn't play nice with lazy EE, use legacy mpic for now */ +#ifdef CONFIG_PPC64 + .get_irq = mpic_get_irq, +#else + .get_irq = mpic_get_coreint_irq, +#endif + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +machine_device_initcall(p5020_ds, corenet_ds_publish_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier); +#endif diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index bd38b6a240de..5c91a992f02b 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -16,6 +16,7 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/kexec.h> +#include <linux/highmem.h> #include <asm/machdep.h> #include <asm/pgtable.h> @@ -121,19 +122,15 @@ struct smp_ops_t smp_85xx_ops = { }; #ifdef CONFIG_KEXEC -static int kexec_down_cpus = 0; +atomic_t kexec_down_cpus = ATOMIC_INIT(0); void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary) { - mpic_teardown_this_cpu(1); - - /* When crashing, this gets called on all CPU's we only - * take down the non-boot cpus */ - if (smp_processor_id() != boot_cpuid) - { - local_irq_disable(); - kexec_down_cpus++; + local_irq_disable(); + if (secondary) { + atomic_inc(&kexec_down_cpus); + /* loop forever */ while (1); } } @@ -144,16 +141,65 @@ static void mpc85xx_smp_kexec_down(void *arg) ppc_md.kexec_cpu_down(0,1); } -static void mpc85xx_smp_machine_kexec(struct kimage *image) +static void map_and_flush(unsigned long paddr) +{ + struct page *page = pfn_to_page(paddr >> PAGE_SHIFT); + unsigned long kaddr = (unsigned long)kmap(page); + + flush_dcache_range(kaddr, kaddr + PAGE_SIZE); + kunmap(page); +} + +/** + * Before we reset the other cores, we need to flush relevant cache + * out to memory so we don't get anything corrupted, some of these flushes + * are performed out of an overabundance of caution as interrupts are not + * disabled yet and we can switch cores + */ +static void mpc85xx_smp_flush_dcache_kexec(struct kimage *image) { - int timeout = 2000; + kimage_entry_t *ptr, entry; + unsigned long paddr; int i; - set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); + if (image->type == KEXEC_TYPE_DEFAULT) { + /* normal kexec images are stored in temporary pages */ + for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE); + ptr = (entry & IND_INDIRECTION) ? + phys_to_virt(entry & PAGE_MASK) : ptr + 1) { + if (!(entry & IND_DESTINATION)) { + map_and_flush(entry); + } + } + /* flush out last IND_DONE page */ + map_and_flush(entry); + } else { + /* crash type kexec images are copied to the crash region */ + for (i = 0; i < image->nr_segments; i++) { + struct kexec_segment *seg = &image->segment[i]; + for (paddr = seg->mem; paddr < seg->mem + seg->memsz; + paddr += PAGE_SIZE) { + map_and_flush(paddr); + } + } + } + + /* also flush the kimage struct to be passed in as well */ + flush_dcache_range((unsigned long)image, + (unsigned long)image + sizeof(*image)); +} + +static void mpc85xx_smp_machine_kexec(struct kimage *image) +{ + int timeout = INT_MAX; + int i, num_cpus = num_present_cpus(); + + mpc85xx_smp_flush_dcache_kexec(image); - smp_call_function(mpc85xx_smp_kexec_down, NULL, 0); + if (image->type == KEXEC_TYPE_DEFAULT) + smp_call_function(mpc85xx_smp_kexec_down, NULL, 0); - while ( (kexec_down_cpus != (num_online_cpus() - 1)) && + while ( (atomic_read(&kexec_down_cpus) != (num_cpus - 1)) && ( timeout > 0 ) ) { timeout--; @@ -162,7 +208,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) if ( !timeout ) printk(KERN_ERR "Unable to bring down secondary cpu(s)"); - for (i = 0; i < num_present_cpus(); i++) + for (i = 0; i < num_cpus; i++) { if ( i == smp_processor_id() ) continue; mpic_reset_core(i); diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index d361f8119b1e..111138c55f9c 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -125,6 +125,7 @@ config 8xx config E500 select FSL_EMB_PERFMON + select PPC_FSL_BOOK3E bool config PPC_E500MC @@ -166,9 +167,14 @@ config BOOKE config FSL_BOOKE bool - depends on E200 || E500 + depends on (E200 || E500) && PPC32 default y +# this is for common code between PPC32 & PPC64 FSL BOOKE +config PPC_FSL_BOOK3E + bool + select FSL_EMB_PERFMON + default y if FSL_BOOKE config PTE_64BIT bool diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index c20ad6de33ee..0bef9dacb64e 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_FSL_PMC) += fsl_pmc.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o +obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h new file mode 100644 index 000000000000..60c9c0bd5ba2 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h @@ -0,0 +1,101 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc + * + * QorIQ based Cache Controller Memory Mapped Registers + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __FSL_85XX_CACHE_CTLR_H__ +#define __FSL_85XX_CACHE_CTLR_H__ + +#define L2CR_L2FI 0x40000000 /* L2 flash invalidate */ +#define L2CR_L2IO 0x00200000 /* L2 instruction only */ +#define L2CR_SRAM_ZERO 0x00000000 /* L2SRAM zero size */ +#define L2CR_SRAM_FULL 0x00010000 /* L2SRAM full size */ +#define L2CR_SRAM_HALF 0x00020000 /* L2SRAM half size */ +#define L2CR_SRAM_TWO_HALFS 0x00030000 /* L2SRAM two half sizes */ +#define L2CR_SRAM_QUART 0x00040000 /* L2SRAM one quarter size */ +#define L2CR_SRAM_TWO_QUARTS 0x00050000 /* L2SRAM two quarter size */ +#define L2CR_SRAM_EIGHTH 0x00060000 /* L2SRAM one eighth size */ +#define L2CR_SRAM_TWO_EIGHTH 0x00070000 /* L2SRAM two eighth size */ + +#define L2SRAM_OPTIMAL_SZ_SHIFT 0x00000003 /* Optimum size for L2SRAM */ + +#define L2SRAM_BAR_MSK_LO18 0xFFFFC000 /* Lower 18 bits */ +#define L2SRAM_BARE_MSK_HI4 0x0000000F /* Upper 4 bits */ + +enum cache_sram_lock_ways { + LOCK_WAYS_ZERO, + LOCK_WAYS_EIGHTH, + LOCK_WAYS_TWO_EIGHTH, + LOCK_WAYS_HALF = 4, + LOCK_WAYS_FULL = 8, +}; + +struct mpc85xx_l2ctlr { + u32 ctl; /* 0x000 - L2 control */ + u8 res1[0xC]; + u32 ewar0; /* 0x010 - External write address 0 */ + u32 ewarea0; /* 0x014 - External write address extended 0 */ + u32 ewcr0; /* 0x018 - External write ctrl */ + u8 res2[4]; + u32 ewar1; /* 0x020 - External write address 1 */ + u32 ewarea1; /* 0x024 - External write address extended 1 */ + u32 ewcr1; /* 0x028 - External write ctrl 1 */ + u8 res3[4]; + u32 ewar2; /* 0x030 - External write address 2 */ + u32 ewarea2; /* 0x034 - External write address extended 2 */ + u32 ewcr2; /* 0x038 - External write ctrl 2 */ + u8 res4[4]; + u32 ewar3; /* 0x040 - External write address 3 */ + u32 ewarea3; /* 0x044 - External write address extended 3 */ + u32 ewcr3; /* 0x048 - External write ctrl 3 */ + u8 res5[0xB4]; + u32 srbar0; /* 0x100 - SRAM base address 0 */ + u32 srbarea0; /* 0x104 - SRAM base addr reg ext address 0 */ + u32 srbar1; /* 0x108 - SRAM base address 1 */ + u32 srbarea1; /* 0x10C - SRAM base addr reg ext address 1 */ + u8 res6[0xCF0]; + u32 errinjhi; /* 0xE00 - Error injection mask high */ + u32 errinjlo; /* 0xE04 - Error injection mask low */ + u32 errinjctl; /* 0xE08 - Error injection tag/ecc control */ + u8 res7[0x14]; + u32 captdatahi; /* 0xE20 - Error data high capture */ + u32 captdatalo; /* 0xE24 - Error data low capture */ + u32 captecc; /* 0xE28 - Error syndrome */ + u8 res8[0x14]; + u32 errdet; /* 0xE40 - Error detect */ + u32 errdis; /* 0xE44 - Error disable */ + u32 errinten; /* 0xE48 - Error interrupt enable */ + u32 errattr; /* 0xE4c - Error attribute capture */ + u32 erradrrl; /* 0xE50 - Error address capture low */ + u32 erradrrh; /* 0xE54 - Error address capture high */ + u32 errctl; /* 0xE58 - Error control */ + u8 res9[0x1A4]; +}; + +struct sram_parameters { + unsigned int sram_size; + uint64_t sram_offset; +}; + +extern int instantiate_cache_sram(struct platform_device *dev, + struct sram_parameters sram_params); +extern void remove_cache_sram(struct platform_device *dev); + +#endif /* __FSL_85XX_CACHE_CTLR_H__ */ diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c new file mode 100644 index 000000000000..54fb1922fe30 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c @@ -0,0 +1,159 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * Simple memory allocator abstraction for QorIQ (P1/P2) based Cache-SRAM + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + * + * This file is derived from the original work done + * by Sylvain Munaut for the Bestcomm SRAM allocator. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of_platform.h> +#include <asm/pgtable.h> +#include <asm/fsl_85xx_cache_sram.h> + +#include "fsl_85xx_cache_ctlr.h" + +struct mpc85xx_cache_sram *cache_sram; + +void *mpc85xx_cache_sram_alloc(unsigned int size, + phys_addr_t *phys, unsigned int align) +{ + unsigned long offset; + unsigned long flags; + + if (unlikely(cache_sram == NULL)) + return NULL; + + if (!size || (size > cache_sram->size) || (align > cache_sram->size)) { + pr_err("%s(): size(=%x) or align(=%x) zero or too big\n", + __func__, size, align); + return NULL; + } + + if ((align & (align - 1)) || align <= 1) { + pr_err("%s(): align(=%x) must be power of two and >1\n", + __func__, align); + return NULL; + } + + spin_lock_irqsave(&cache_sram->lock, flags); + offset = rh_alloc_align(cache_sram->rh, size, align, NULL); + spin_unlock_irqrestore(&cache_sram->lock, flags); + + if (IS_ERR_VALUE(offset)) + return NULL; + + *phys = cache_sram->base_phys + offset; + + return (unsigned char *)cache_sram->base_virt + offset; +} +EXPORT_SYMBOL(mpc85xx_cache_sram_alloc); + +void mpc85xx_cache_sram_free(void *ptr) +{ + unsigned long flags; + BUG_ON(!ptr); + + spin_lock_irqsave(&cache_sram->lock, flags); + rh_free(cache_sram->rh, ptr - cache_sram->base_virt); + spin_unlock_irqrestore(&cache_sram->lock, flags); +} +EXPORT_SYMBOL(mpc85xx_cache_sram_free); + +int __init instantiate_cache_sram(struct platform_device *dev, + struct sram_parameters sram_params) +{ + int ret = 0; + + if (cache_sram) { + dev_err(&dev->dev, "Already initialized cache-sram\n"); + return -EBUSY; + } + + cache_sram = kzalloc(sizeof(struct mpc85xx_cache_sram), GFP_KERNEL); + if (!cache_sram) { + dev_err(&dev->dev, "Out of memory for cache_sram structure\n"); + return -ENOMEM; + } + + cache_sram->base_phys = sram_params.sram_offset; + cache_sram->size = sram_params.sram_size; + + if (!request_mem_region(cache_sram->base_phys, cache_sram->size, + "fsl_85xx_cache_sram")) { + dev_err(&dev->dev, "%s: request memory failed\n", + dev->dev.of_node->full_name); + ret = -ENXIO; + goto out_free; + } + + cache_sram->base_virt = ioremap_flags(cache_sram->base_phys, + cache_sram->size, _PAGE_COHERENT | PAGE_KERNEL); + if (!cache_sram->base_virt) { + dev_err(&dev->dev, "%s: ioremap_flags failed\n", + dev->dev.of_node->full_name); + ret = -ENOMEM; + goto out_release; + } + + cache_sram->rh = rh_create(sizeof(unsigned int)); + if (IS_ERR(cache_sram->rh)) { + dev_err(&dev->dev, "%s: Unable to create remote heap\n", + dev->dev.of_node->full_name); + ret = PTR_ERR(cache_sram->rh); + goto out_unmap; + } + + rh_attach_region(cache_sram->rh, 0, cache_sram->size); + spin_lock_init(&cache_sram->lock); + + dev_info(&dev->dev, "[base:0x%llx, size:0x%x] configured and loaded\n", + (unsigned long long)cache_sram->base_phys, cache_sram->size); + + return 0; + +out_unmap: + iounmap(cache_sram->base_virt); + +out_release: + release_mem_region(cache_sram->base_phys, cache_sram->size); + +out_free: + kfree(cache_sram); + return ret; +} + +void remove_cache_sram(struct platform_device *dev) +{ + BUG_ON(!cache_sram); + + rh_detach_region(cache_sram->rh, 0, cache_sram->size); + rh_destroy(cache_sram->rh); + + iounmap(cache_sram->base_virt); + release_mem_region(cache_sram->base_phys, cache_sram->size); + + kfree(cache_sram); + cache_sram = NULL; + + dev_info(&dev->dev, "MPC85xx Cache-SRAM driver unloaded\n"); +} diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c new file mode 100644 index 000000000000..cc8d6556d799 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c @@ -0,0 +1,231 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * QorIQ (P1/P2) L2 controller init for Cache-SRAM instantiation + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <asm/io.h> + +#include "fsl_85xx_cache_ctlr.h" + +static char *sram_size; +static char *sram_offset; +struct mpc85xx_l2ctlr __iomem *l2ctlr; + +static long get_cache_sram_size(void) +{ + unsigned long val; + + if (!sram_size || (strict_strtoul(sram_size, 0, &val) < 0)) + return -EINVAL; + + return val; +} + +static long get_cache_sram_offset(void) +{ + unsigned long val; + + if (!sram_offset || (strict_strtoul(sram_offset, 0, &val) < 0)) + return -EINVAL; + + return val; +} + +static int __init get_size_from_cmdline(char *str) +{ + if (!str) + return 0; + + sram_size = str; + return 1; +} + +static int __init get_offset_from_cmdline(char *str) +{ + if (!str) + return 0; + + sram_offset = str; + return 1; +} + +__setup("cache-sram-size=", get_size_from_cmdline); +__setup("cache-sram-offset=", get_offset_from_cmdline); + +static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev, + const struct of_device_id *match) +{ + long rval; + unsigned int rem; + unsigned char ways; + const unsigned int *prop; + unsigned int l2cache_size; + struct sram_parameters sram_params; + + if (!dev->dev.of_node) { + dev_err(&dev->dev, "Device's OF-node is NULL\n"); + return -EINVAL; + } + + prop = of_get_property(dev->dev.of_node, "cache-size", NULL); + if (!prop) { + dev_err(&dev->dev, "Missing L2 cache-size\n"); + return -EINVAL; + } + l2cache_size = *prop; + + sram_params.sram_size = get_cache_sram_size(); + if (sram_params.sram_size <= 0) { + dev_err(&dev->dev, + "Entire L2 as cache, Aborting Cache-SRAM stuff\n"); + return -EINVAL; + } + + sram_params.sram_offset = get_cache_sram_offset(); + if (sram_params.sram_offset <= 0) { + dev_err(&dev->dev, + "Entire L2 as cache, provide a valid sram offset\n"); + return -EINVAL; + } + + + rem = l2cache_size % sram_params.sram_size; + ways = LOCK_WAYS_FULL * sram_params.sram_size / l2cache_size; + if (rem || (ways & (ways - 1))) { + dev_err(&dev->dev, "Illegal cache-sram-size in command line\n"); + return -EINVAL; + } + + l2ctlr = of_iomap(dev->dev.of_node, 0); + if (!l2ctlr) { + dev_err(&dev->dev, "Can't map L2 controller\n"); + return -EINVAL; + } + + /* + * Write bits[0-17] to srbar0 + */ + out_be32(&l2ctlr->srbar0, + sram_params.sram_offset & L2SRAM_BAR_MSK_LO18); + + /* + * Write bits[18-21] to srbare0 + */ +#ifdef CONFIG_PHYS_64BIT + out_be32(&l2ctlr->srbarea0, + (sram_params.sram_offset >> 32) & L2SRAM_BARE_MSK_HI4); +#endif + + clrsetbits_be32(&l2ctlr->ctl, L2CR_L2E, L2CR_L2FI); + + switch (ways) { + case LOCK_WAYS_EIGHTH: + setbits32(&l2ctlr->ctl, + L2CR_L2E | L2CR_L2FI | L2CR_SRAM_EIGHTH); + break; + + case LOCK_WAYS_TWO_EIGHTH: + setbits32(&l2ctlr->ctl, + L2CR_L2E | L2CR_L2FI | L2CR_SRAM_QUART); + break; + + case LOCK_WAYS_HALF: + setbits32(&l2ctlr->ctl, + L2CR_L2E | L2CR_L2FI | L2CR_SRAM_HALF); + break; + + case LOCK_WAYS_FULL: + default: + setbits32(&l2ctlr->ctl, + L2CR_L2E | L2CR_L2FI | L2CR_SRAM_FULL); + break; + } + eieio(); + + rval = instantiate_cache_sram(dev, sram_params); + if (rval < 0) { + dev_err(&dev->dev, "Can't instantiate Cache-SRAM\n"); + iounmap(l2ctlr); + return -EINVAL; + } + + return 0; +} + +static int __devexit mpc85xx_l2ctlr_of_remove(struct platform_device *dev) +{ + BUG_ON(!l2ctlr); + + iounmap(l2ctlr); + remove_cache_sram(dev); + dev_info(&dev->dev, "MPC85xx L2 controller unloaded\n"); + + return 0; +} + +static struct of_device_id mpc85xx_l2ctlr_of_match[] = { + { + .compatible = "fsl,p2020-l2-cache-controller", + }, + { + .compatible = "fsl,p2010-l2-cache-controller", + }, + { + .compatible = "fsl,p1020-l2-cache-controller", + }, + { + .compatible = "fsl,p1011-l2-cache-controller", + }, + { + .compatible = "fsl,p1013-l2-cache-controller", + }, + { + .compatible = "fsl,p1022-l2-cache-controller", + }, + {}, +}; + +static struct of_platform_driver mpc85xx_l2ctlr_of_platform_driver = { + .driver = { + .name = "fsl-l2ctlr", + .owner = THIS_MODULE, + .of_match_table = mpc85xx_l2ctlr_of_match, + }, + .probe = mpc85xx_l2ctlr_of_probe, + .remove = __devexit_p(mpc85xx_l2ctlr_of_remove), +}; + +static __init int mpc85xx_l2ctlr_of_init(void) +{ + return of_register_platform_driver(&mpc85xx_l2ctlr_of_platform_driver); +} + +static void __exit mpc85xx_l2ctlr_of_exit(void) +{ + of_unregister_platform_driver(&mpc85xx_l2ctlr_of_platform_driver); +} + +subsys_initcall(mpc85xx_l2ctlr_of_init); +module_exit(mpc85xx_l2ctlr_of_exit); + +MODULE_DESCRIPTION("Freescale MPC85xx L2 controller init"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 87991d3abbab..20cdcd2b0eed 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -24,6 +24,7 @@ #include <asm/ppc-pci.h> #include <asm/mpic.h> #include "fsl_msi.h" +#include "fsl_pci.h" LIST_HEAD(msi_head); @@ -125,13 +126,11 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq, { struct fsl_msi *msi_data = fsl_msi_data; struct pci_controller *hose = pci_bus_to_host(pdev->bus); - u32 base = 0; + u64 base = fsl_pci_immrbar_base(hose); - pci_bus_read_config_dword(hose->bus, - PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); + msg->address_lo = msi_data->msi_addr_lo + lower_32_bits(base); + msg->address_hi = msi_data->msi_addr_hi + upper_32_bits(base); - msg->address_lo = msi_data->msi_addr_lo + base; - msg->address_hi = msi_data->msi_addr_hi; msg->data = hwirq; pr_debug("%s: allocated srs: %d, ibs: %d\n", diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4ae933225251..818f7c6c8fa1 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -1,7 +1,7 @@ /* * MPC83xx/85xx/86xx PCI/PCIE support routing. * - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * Copyright 2008-2009 MontaVista Software, Inc. * * Initial author: Xianghua Xiao <x.xiao@freescale.com> @@ -34,7 +34,7 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> -static int fsl_pcie_bus_fixup; +static int fsl_pcie_bus_fixup, is_mpc83xx_pci; static void __init quirk_fsl_pcie_header(struct pci_dev *dev) { @@ -407,10 +407,18 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2040E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2040, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P3041E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P3041, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5010E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5010, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5020E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5020, quirk_fsl_pcie_header); #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) @@ -430,6 +438,13 @@ struct mpc83xx_pcie_priv { u32 dev_base; }; +struct pex_inbound_window { + u32 ar; + u32 tar; + u32 barl; + u32 barh; +}; + /* * With the convention of u-boot, the PCIE outbound window 0 serves * as configuration transactions outbound. @@ -437,6 +452,8 @@ struct mpc83xx_pcie_priv { #define PEX_OUTWIN0_BAR 0xCA4 #define PEX_OUTWIN0_TAL 0xCA8 #define PEX_OUTWIN0_TAH 0xCAC +#define PEX_RC_INWIN_BASE 0xE60 +#define PEX_RCIWARn_EN 0x1 static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) { @@ -604,6 +621,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev) const int *bus_range; int primary; + is_mpc83xx_pci = 1; + if (!of_device_is_available(dev)) { pr_warning("%s: disabled by the firmware.\n", dev->full_name); @@ -683,3 +702,40 @@ err0: return ret; } #endif /* CONFIG_PPC_83xx */ + +u64 fsl_pci_immrbar_base(struct pci_controller *hose) +{ +#ifdef CONFIG_PPC_83xx + if (is_mpc83xx_pci) { + struct mpc83xx_pcie_priv *pcie = hose->dn->data; + struct pex_inbound_window *in; + int i; + + /* Walk the Root Complex Inbound windows to match IMMR base */ + in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; + for (i = 0; i < 4; i++) { + /* not enabled, skip */ + if (!in_le32(&in[i].ar) & PEX_RCIWARn_EN) + continue; + + if (get_immrbase() == in_le32(&in[i].tar)) + return (u64)in_le32(&in[i].barh) << 32 | + in_le32(&in[i].barl); + } + + printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); + } +#endif + +#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) + if (!is_mpc83xx_pci) { + u32 base; + + pci_bus_read_config_dword(hose->bus, + PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); + return base; + } +#endif + + return 0; +} diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h index a9d8bbebed80..8ad72a11f77b 100644 --- a/arch/powerpc/sysdev/fsl_pci.h +++ b/arch/powerpc/sysdev/fsl_pci.h @@ -88,6 +88,7 @@ struct ccsr_pci { extern int fsl_add_bridge(struct device_node *dev, int is_primary); extern void fsl_pcibios_fixup_bus(struct pci_bus *bus); extern int mpc83xx_add_bridge(struct device_node *dev); +u64 fsl_pci_immrbar_base(struct pci_controller *hose); #endif /* __POWERPC_FSL_PCI_H */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 3017532319c8..412763672d23 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -117,44 +117,59 @@ struct rio_atmu_regs { }; struct rio_msg_regs { - u32 omr; - u32 osr; + u32 omr; /* 0xD_3000 - Outbound message 0 mode register */ + u32 osr; /* 0xD_3004 - Outbound message 0 status register */ u32 pad1; - u32 odqdpar; + u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue + dequeue pointer address register */ u32 pad2; - u32 osar; - u32 odpr; - u32 odatr; - u32 odcr; + u32 osar; /* 0xD_3014 - Outbound message 0 source address + register */ + u32 odpr; /* 0xD_3018 - Outbound message 0 destination port + register */ + u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes + Register*/ + u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count + register */ u32 pad3; - u32 odqepar; + u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue + enqueue pointer address register */ u32 pad4[13]; - u32 imr; - u32 isr; + u32 imr; /* 0xD_3060 - Inbound message 0 mode register */ + u32 isr; /* 0xD_3064 - Inbound message 0 status register */ u32 pad5; - u32 ifqdpar; + u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue + pointer address register*/ u32 pad6; - u32 ifqepar; + u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue + pointer address register */ u32 pad7[226]; - u32 odmr; - u32 odsr; + u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */ + u32 odsr; /* 0xD_3404 - Outbound doorbell status register */ u32 res0[4]; - u32 oddpr; - u32 oddatr; + u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port + register */ + u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes + register */ u32 res1[3]; - u32 odretcr; + u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold + configuration register */ u32 res2[12]; - u32 dmr; - u32 dsr; + u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */ + u32 dsr; /* 0xD_3464 - Inbound doorbell status register */ u32 pad8; - u32 dqdpar; + u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer + address register */ u32 pad9; - u32 dqepar; + u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer + address register */ u32 pad10[26]; - u32 pwmr; - u32 pwsr; - u32 epwqbar; - u32 pwqbar; + u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */ + u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */ + u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address + register */ + u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address + register */ }; struct rio_tx_desc { diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index b91f7acdda6f..6c67d9ebf166 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -378,17 +378,23 @@ static __be32 __iomem *rstcr; static int __init setup_rstcr(void) { struct device_node *np; - np = of_find_node_by_name(NULL, "global-utilities"); - if ((np && of_get_property(np, "fsl,has-rstcr", NULL))) { - rstcr = of_iomap(np, 0) + 0xb0; - if (!rstcr) - printk (KERN_EMERG "Error: reset control register " - "not mapped!\n"); - } else if (ppc_md.restart == fsl_rstcr_restart) + + for_each_node_by_name(np, "global-utilities") { + if ((of_get_property(np, "fsl,has-rstcr", NULL))) { + rstcr = of_iomap(np, 0) + 0xb0; + if (!rstcr) + printk (KERN_ERR "Error: reset control " + "register not mapped!\n"); + break; + } + } + + if (!rstcr && ppc_md.restart == fsl_rstcr_restart) printk(KERN_ERR "No RSTCR register, warm reboot won't work\n"); if (np) of_node_put(np); + return 0; } diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c index 2b69084d0f0c..c0ea05e87f1d 100644 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -330,6 +330,9 @@ static int __init mpc8xxx_add_gpiochips(void) for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio") mpc8xxx_add_controller(np); + for_each_compatible_node(np, NULL, "fsl,qoriq-gpio") + mpc8xxx_add_controller(np); + return 0; } arch_initcall(mpc8xxx_add_gpiochips); |
