diff options
Diffstat (limited to 'arch')
173 files changed, 12927 insertions, 2648 deletions
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 6d48e00f4f0b..a6fff782e7a8 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -135,6 +135,11 @@ static unsigned long e740_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* Audio power control */ + GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ + GPIO40_GPIO, /* Mic amp power */ + GPIO41_GPIO, /* Headphone amp power */ + /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index be1ab8edb973..665066fd280e 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -133,6 +133,11 @@ static unsigned long e750_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* Audio power control */ + GPIO4_GPIO, /* Headphone amp power */ + GPIO7_GPIO, /* Speaker amp power */ + GPIO37_GPIO, /* Headphone detect */ + /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index da6e4422c0f3..295ec413d804 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -153,6 +153,13 @@ static unsigned long h5000_pin_config[] __initdata = { GPIO23_SSP1_SCLK, GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO32_I2S_SYSCLK, }; /* diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index efbd2aa9ecec..f3e5509820d7 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -45,6 +45,21 @@ /* e7xx IrDA power control */ #define GPIO_E7XX_IR_OFF 38 +/* e740 audio control GPIOs */ +#define GPIO_E740_WM9705_nAVDD2 16 +#define GPIO_E740_MIC_ON 40 +#define GPIO_E740_AMP_ON 41 + +/* e750 audio control GPIOs */ +#define GPIO_E750_HP_AMP_OFF 4 +#define GPIO_E750_SPK_AMP_OFF 7 +#define GPIO_E750_HP_DETECT 37 + +/* e800 audio control GPIOs */ +#define GPIO_E800_HP_DETECT 81 +#define GPIO_E800_HP_AMP_OFF 82 +#define GPIO_E800_SPK_AMP_ON 83 + /* ASIC related GPIOs */ #define GPIO_ESERIES_TMIO_IRQ 5 #define GPIO_ESERIES_TMIO_PCLR 19 diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h index cf31986f6f05..018f6d65b57b 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h @@ -50,7 +50,7 @@ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_ACS (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif @@ -109,6 +109,11 @@ #define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ +#if defined(CONFIG_PXA3xx) +#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ +#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ +#endif + #define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ #define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ #define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6d447c9ce8ab..0d62d311d41a 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -105,6 +105,12 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO57_nIOIS16, GPIO104_PSKTSEL, + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + /* MMC */ GPIO32_MMC_CLK, GPIO112_MMC_CMD, diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 552b4c778fdc..440c014e24b3 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -28,7 +28,7 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> -#include <asm/plat-s3c24xx/regs-iis.h> +#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 919856c9433f..9e3478506c6f 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -29,8 +29,8 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> -#include <asm/plat-s3c24xx/regs-s3c2412-iis.h> -#include <asm/plat-s3c24xx/regs-iis.h> +#include <plat/regs-s3c2412-iis.h> +#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 5b5ee0b8f4e0..69b6cf34df47 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -28,7 +28,7 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> -#include <asm/plat-s3c24xx/regs-iis.h> +#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 2a58a4d5aa5a..8430e5829186 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -29,7 +29,7 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> -#include <asm/plat-s3c24xx/regs-iis.h> +#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { \ diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/plat-s3c/include/plat/audio.h index de0e8da48bc3..de0e8da48bc3 100644 --- a/arch/arm/mach-s3c2410/include/mach/audio.h +++ b/arch/arm/plat-s3c/include/plat/audio.h diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h new file mode 100644 index 000000000000..0fad7571030e --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h @@ -0,0 +1,75 @@ +/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h + * + * Copyright 2007 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H +#define __ASM_ARCH_REGS_S3C2412_IIS_H + +#define S3C2412_IISCON (0x00) +#define S3C2412_IISMOD (0x04) +#define S3C2412_IISFIC (0x08) +#define S3C2412_IISPSR (0x0C) +#define S3C2412_IISTXD (0x10) +#define S3C2412_IISRXD (0x14) + +#define S3C2412_IISCON_LRINDEX (1 << 11) +#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) +#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) +#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) +#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) +#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) +#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) +#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) +#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) +#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) +#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) +#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) + +#define S3C64XX_IISMOD_IMS_PCLK (0 << 10) +#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) + +#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) +#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) +#define S3C2412_IISMOD_SLAVE (2 << 10) +#define S3C2412_IISMOD_MASTER_MASK (3 << 10) +#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) +#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) +#define S3C2412_IISMOD_MODE_TXRX (2 << 8) +#define S3C2412_IISMOD_MODE_MASK (3 << 8) +#define S3C2412_IISMOD_LR_LLOW (0 << 7) +#define S3C2412_IISMOD_LR_RLOW (1 << 7) +#define S3C2412_IISMOD_SDF_IIS (0 << 5) +#define S3C2412_IISMOD_SDF_MSB (1 << 5) +#define S3C2412_IISMOD_SDF_LSB (2 << 5) +#define S3C2412_IISMOD_SDF_MASK (3 << 5) +#define S3C2412_IISMOD_RCLK_256FS (0 << 3) +#define S3C2412_IISMOD_RCLK_512FS (1 << 3) +#define S3C2412_IISMOD_RCLK_384FS (2 << 3) +#define S3C2412_IISMOD_RCLK_768FS (3 << 3) +#define S3C2412_IISMOD_RCLK_MASK (3 << 3) +#define S3C2412_IISMOD_BCLK_32FS (0 << 1) +#define S3C2412_IISMOD_BCLK_48FS (1 << 1) +#define S3C2412_IISMOD_BCLK_16FS (2 << 1) +#define S3C2412_IISMOD_BCLK_24FS (3 << 1) +#define S3C2412_IISMOD_BCLK_MASK (3 << 1) +#define S3C2412_IISMOD_8BIT (1 << 0) + +#define S3C2412_IISPSR_PSREN (1 << 15) + +#define S3C2412_IISFIC_TXFLUSH (1 << 15) +#define S3C2412_IISFIC_RXFLUSH (1 << 7) +#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) + + + +#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ + diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h new file mode 100644 index 000000000000..a6f1d5df13b4 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h @@ -0,0 +1,77 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-iis.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_IIS_H +#define __ASM_ARCH_REGS_IIS_H + +#define S3C2410_IISCON (0x00) + +#define S3C2410_IISCON_LRINDEX (1<<8) +#define S3C2410_IISCON_TXFIFORDY (1<<7) +#define S3C2410_IISCON_RXFIFORDY (1<<6) +#define S3C2410_IISCON_TXDMAEN (1<<5) +#define S3C2410_IISCON_RXDMAEN (1<<4) +#define S3C2410_IISCON_TXIDLE (1<<3) +#define S3C2410_IISCON_RXIDLE (1<<2) +#define S3C2410_IISCON_PSCEN (1<<1) +#define S3C2410_IISCON_IISEN (1<<0) + +#define S3C2410_IISMOD (0x04) + +#define S3C2440_IISMOD_MPLL (1<<9) +#define S3C2410_IISMOD_SLAVE (1<<8) +#define S3C2410_IISMOD_NOXFER (0<<6) +#define S3C2410_IISMOD_RXMODE (1<<6) +#define S3C2410_IISMOD_TXMODE (2<<6) +#define S3C2410_IISMOD_TXRXMODE (3<<6) +#define S3C2410_IISMOD_LR_LLOW (0<<5) +#define S3C2410_IISMOD_LR_RLOW (1<<5) +#define S3C2410_IISMOD_IIS (0<<4) +#define S3C2410_IISMOD_MSB (1<<4) +#define S3C2410_IISMOD_8BIT (0<<3) +#define S3C2410_IISMOD_16BIT (1<<3) +#define S3C2410_IISMOD_BITMASK (1<<3) +#define S3C2410_IISMOD_256FS (0<<2) +#define S3C2410_IISMOD_384FS (1<<2) +#define S3C2410_IISMOD_16FS (0<<0) +#define S3C2410_IISMOD_32FS (1<<0) +#define S3C2410_IISMOD_48FS (2<<0) +#define S3C2410_IISMOD_FS_MASK (3<<0) + +#define S3C2410_IISPSR (0x08) +#define S3C2410_IISPSR_INTMASK (31<<5) +#define S3C2410_IISPSR_INTSHIFT (5) +#define S3C2410_IISPSR_EXTMASK (31<<0) +#define S3C2410_IISPSR_EXTSHFIT (0) + +#define S3C2410_IISFCON (0x0c) + +#define S3C2410_IISFCON_TXDMA (1<<15) +#define S3C2410_IISFCON_RXDMA (1<<14) +#define S3C2410_IISFCON_TXENABLE (1<<13) +#define S3C2410_IISFCON_RXENABLE (1<<12) +#define S3C2410_IISFCON_TXMASK (0x3f << 6) +#define S3C2410_IISFCON_TXSHIFT (6) +#define S3C2410_IISFCON_RXMASK (0x3f) +#define S3C2410_IISFCON_RXSHIFT (0) + +#define S3C2400_IISFCON_TXDMA (1<<11) +#define S3C2400_IISFCON_RXDMA (1<<10) +#define S3C2400_IISFCON_TXENABLE (1<<9) +#define S3C2400_IISFCON_RXENABLE (1<<8) +#define S3C2400_IISFCON_TXMASK (0x07 << 4) +#define S3C2400_IISFCON_TXSHIFT (4) +#define S3C2400_IISFCON_RXMASK (0x07) +#define S3C2400_IISFCON_RXSHIFT (0) + +#define S3C2410_IISFIFO (0x10) +#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c index a98c6dd3a028..559bbcb03f9b 100644 --- a/arch/avr32/boards/hammerhead/flash.c +++ b/arch/avr32/boards/hammerhead/flash.c @@ -15,7 +15,6 @@ #include <linux/mtd/physmap.h> #include <linux/usb/isp116x.h> #include <linux/dma-mapping.h> -#include <linux/platform_device.h> #include <linux/delay.h> #include <mach/portmux.h> diff --git a/arch/avr32/include/asm/uaccess.h b/arch/avr32/include/asm/uaccess.h index ed092395215e..245b2ee213c9 100644 --- a/arch/avr32/include/asm/uaccess.h +++ b/arch/avr32/include/asm/uaccess.h @@ -230,10 +230,10 @@ extern int __put_user_bad(void); asm volatile( \ "1: ld." suffix " %1, %3 \n" \ "2: \n" \ - " .section .fixup, \"ax\" \n" \ + " .subsection 1 \n" \ "3: mov %0, %4 \n" \ " rjmp 2b \n" \ - " .previous \n" \ + " .subsection 0 \n" \ " .section __ex_table, \"a\" \n" \ " .long 1b, 3b \n" \ " .previous \n" \ @@ -295,10 +295,10 @@ extern int __put_user_bad(void); asm volatile( \ "1: st." suffix " %1, %3 \n" \ "2: \n" \ - " .section .fixup, \"ax\" \n" \ + " .subsection 1 \n" \ "3: mov %0, %4 \n" \ " rjmp 2b \n" \ - " .previous \n" \ + " .subsection 0 \n" \ " .section __ex_table, \"a\" \n" \ " .long 1b, 3b \n" \ " .previous \n" \ diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 33d49377b8be..009a80155d67 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -150,10 +150,10 @@ page_not_present: tlbmiss_restore sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mfsr r12, SYSREG_ECR mov r11, sp - rcall do_page_fault + call do_page_fault rjmp ret_from_exception .align 2 @@ -250,7 +250,7 @@ syscall_badsys: .global ret_from_fork ret_from_fork: - rcall schedule_tail + call schedule_tail /* check for syscall tracing */ get_thread_info r0 @@ -261,7 +261,7 @@ ret_from_fork: syscall_trace_enter: pushm r8-r12 - rcall syscall_trace + call syscall_trace popm r8-r12 rjmp syscall_trace_cont @@ -269,14 +269,14 @@ syscall_exit_work: bld r1, TIF_SYSCALL_TRACE brcc 1f unmask_interrupts - rcall syscall_trace + call syscall_trace mask_interrupts ld.w r1, r0[TI_flags] 1: bld r1, TIF_NEED_RESCHED brcc 2f unmask_interrupts - rcall schedule + call schedule mask_interrupts ld.w r1, r0[TI_flags] rjmp 1b @@ -287,7 +287,7 @@ syscall_exit_work: unmask_interrupts mov r12, sp mov r11, r0 - rcall do_notify_resume + call do_notify_resume mask_interrupts ld.w r1, r0[TI_flags] rjmp 1b @@ -394,7 +394,7 @@ handle_critical: mfsr r12, SYSREG_ECR mov r11, sp - rcall do_critical_exception + call do_critical_exception /* We should never get here... */ bad_return: @@ -407,18 +407,18 @@ bad_return: do_bus_error_write: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mov r11, 1 rjmp 1f do_bus_error_read: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mov r11, 0 1: mfsr r12, SYSREG_BEAR mov r10, sp - rcall do_bus_error + call do_bus_error rjmp ret_from_exception .align 1 @@ -433,7 +433,7 @@ do_nmi_ll: 1: pushm r8, r9 /* PC and SR */ mfsr r12, SYSREG_ECR mov r11, sp - rcall do_nmi + call do_nmi popm r8-r9 mtsr SYSREG_RAR_NMI, r8 tst r0, r0 @@ -457,29 +457,29 @@ do_nmi_ll: handle_address_fault: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mfsr r12, SYSREG_ECR mov r11, sp - rcall do_address_exception + call do_address_exception rjmp ret_from_exception handle_protection_fault: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mfsr r12, SYSREG_ECR mov r11, sp - rcall do_page_fault + call do_page_fault rjmp ret_from_exception .align 1 do_illegal_opcode_ll: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex mfsr r12, SYSREG_ECR mov r11, sp - rcall do_illegal_opcode + call do_illegal_opcode rjmp ret_from_exception do_dtlb_modified: @@ -513,11 +513,11 @@ do_dtlb_modified: do_fpe_ll: sub sp, 4 stmts --sp, r0-lr - rcall save_full_context_ex + call save_full_context_ex unmask_interrupts mov r12, 26 mov r11, sp - rcall do_fpe + call do_fpe rjmp ret_from_exception ret_from_exception: @@ -553,7 +553,7 @@ fault_resume_kernel: lddsp r4, sp[REG_SR] bld r4, SYSREG_GM_OFFSET brcs 1f - rcall preempt_schedule_irq + call preempt_schedule_irq 1: #endif @@ -582,7 +582,7 @@ fault_exit_work: bld r1, TIF_NEED_RESCHED brcc 1f unmask_interrupts - rcall schedule + call schedule mask_interrupts ld.w r1, r0[TI_flags] rjmp fault_exit_work @@ -593,7 +593,7 @@ fault_exit_work: unmask_interrupts mov r12, sp mov r11, r0 - rcall do_notify_resume + call do_notify_resume mask_interrupts ld.w r1, r0[TI_flags] rjmp fault_exit_work @@ -616,10 +616,10 @@ handle_debug: .Ldebug_fixup_cont: #ifdef CONFIG_TRACE_IRQFLAGS - rcall trace_hardirqs_off + call trace_hardirqs_off #endif mov r12, sp - rcall do_debug + call do_debug mov sp, r12 lddsp r2, sp[REG_SR] @@ -643,7 +643,7 @@ handle_debug: mtsr SYSREG_RSR_DBG, r11 mtsr SYSREG_RAR_DBG, r10 #ifdef CONFIG_TRACE_IRQFLAGS - rcall trace_hardirqs_on + call trace_hardirqs_on 1: #endif ldmts sp++, r0-lr @@ -676,7 +676,7 @@ debug_resume_kernel: #ifdef CONFIG_TRACE_IRQFLAGS bld r11, SYSREG_GM_OFFSET brcc 1f - rcall trace_hardirqs_on + call trace_hardirqs_on 1: #endif mfsr r2, SYSREG_SR @@ -747,7 +747,7 @@ irq_level\level: mov r11, sp mov r12, \level - rcall do_IRQ + call do_IRQ lddsp r4, sp[REG_SR] bfextu r4, r4, SYSREG_M0_OFFSET, 3 @@ -767,7 +767,7 @@ irq_level\level: 1: #ifdef CONFIG_TRACE_IRQFLAGS - rcall trace_hardirqs_on + call trace_hardirqs_on #endif popm r8-r9 mtsr rar_int\level, r8 @@ -807,7 +807,7 @@ irq_level\level: lddsp r4, sp[REG_SR] bld r4, SYSREG_GM_OFFSET brcs 1b - rcall preempt_schedule_irq + call preempt_schedule_irq #endif rjmp 1b .endm diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S index 673178e235f3..f7244cd02fbb 100644 --- a/arch/avr32/kernel/syscall-stubs.S +++ b/arch/avr32/kernel/syscall-stubs.S @@ -61,7 +61,7 @@ __sys_execve: __sys_mmap2: pushm lr st.w --sp, ARG6 - rcall sys_mmap2 + call sys_mmap2 sub sp, -4 popm pc @@ -70,7 +70,7 @@ __sys_mmap2: __sys_sendto: pushm lr st.w --sp, ARG6 - rcall sys_sendto + call sys_sendto sub sp, -4 popm pc @@ -79,7 +79,7 @@ __sys_sendto: __sys_recvfrom: pushm lr st.w --sp, ARG6 - rcall sys_recvfrom + call sys_recvfrom sub sp, -4 popm pc @@ -88,7 +88,7 @@ __sys_recvfrom: __sys_pselect6: pushm lr st.w --sp, ARG6 - rcall sys_pselect6 + call sys_pselect6 sub sp, -4 popm pc @@ -97,7 +97,7 @@ __sys_pselect6: __sys_splice: pushm lr st.w --sp, ARG6 - rcall sys_splice + call sys_splice sub sp, -4 popm pc @@ -106,7 +106,7 @@ __sys_splice: __sys_epoll_pwait: pushm lr st.w --sp, ARG6 - rcall sys_epoll_pwait + call sys_epoll_pwait sub sp, -4 popm pc @@ -115,6 +115,6 @@ __sys_epoll_pwait: __sys_sync_file_range: pushm lr st.w --sp, ARG6 - rcall sys_sync_file_range + call sys_sync_file_range sub sp, -4 popm pc diff --git a/arch/avr32/lib/strnlen_user.S b/arch/avr32/lib/strnlen_user.S index 65ce11afa66a..e46f4724962b 100644 --- a/arch/avr32/lib/strnlen_user.S +++ b/arch/avr32/lib/strnlen_user.S @@ -48,7 +48,7 @@ adjust_length: lddpc lr, _task_size sub r11, lr, r12 mov r9, r11 - rcall __strnlen_user + call __strnlen_user cp.w r12, r9 brgt 1f popm pc diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c index a1e3526b4a94..dfbfd7e2ac08 100644 --- a/arch/mips/basler/excite/excite_iodev.c +++ b/arch/mips/basler/excite/excite_iodev.c @@ -33,8 +33,8 @@ static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int); -static int __init iodev_probe(struct device *); -static int __exit iodev_remove(struct device *); +static int __init iodev_probe(struct platform_device *); +static int __exit iodev_remove(struct platform_device *); static int iodev_open(struct inode *, struct file *); static int iodev_release(struct inode *, struct file *); static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *); @@ -65,13 +65,13 @@ static struct miscdevice miscdev = .fops = &fops }; -static struct device_driver iodev_driver = -{ - .name = (char *) iodev_name, - .bus = &platform_bus_type, - .owner = THIS_MODULE, +static struct platform_driver iodev_driver = { + .driver = { + .name = iodev_name, + .owner = THIS_MODULE, + }, .probe = iodev_probe, - .remove = __exit_p(iodev_remove) + .remove = __devexit_p(iodev_remove), }; @@ -89,11 +89,10 @@ iodev_get_resource(struct platform_device *pdv, const char *name, /* No hotplugging on the platform bus - use __init */ -static int __init iodev_probe(struct device *dev) +static int __init iodev_probe(struct platform_device *dev) { - struct platform_device * const pdv = to_platform_device(dev); const struct resource * const ri = - iodev_get_resource(pdv, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); + iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); if (unlikely(!ri)) return -ENXIO; @@ -104,7 +103,7 @@ static int __init iodev_probe(struct device *dev) -static int __exit iodev_remove(struct device *dev) +static int __exit iodev_remove(struct platform_device *dev) { return misc_deregister(&miscdev); } @@ -160,14 +159,14 @@ static irqreturn_t iodev_irqhdl(int irq, void *ctxt) static int __init iodev_init_module(void) { - return driver_register(&iodev_driver); + return platform_driver_register(&iodev_driver); } static void __exit iodev_cleanup_module(void) { - driver_unregister(&iodev_driver); + platform_driver_unregister(&iodev_driver); } module_init(iodev_init_module); diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 0417516503f6..526f327475ce 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1391,11 +1391,11 @@ static inline void tlb_write_random(void) static inline unsigned int \ set_c0_##name(unsigned int set) \ { \ - unsigned int res; \ + unsigned int res, new; \ \ res = read_c0_##name(); \ - res |= set; \ - write_c0_##name(res); \ + new = res | set; \ + write_c0_##name(new); \ \ return res; \ } \ @@ -1403,24 +1403,24 @@ set_c0_##name(unsigned int set) \ static inline unsigned int \ clear_c0_##name(unsigned int clear) \ { \ - unsigned int res; \ + unsigned int res, new; \ \ res = read_c0_##name(); \ - res &= ~clear; \ - write_c0_##name(res); \ + new = res & ~clear; \ + write_c0_##name(new); \ \ return res; \ } \ \ static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int new) \ +change_c0_##name(unsigned int change, unsigned int val) \ { \ - unsigned int res; \ + unsigned int res, new; \ \ res = read_c0_##name(); \ - res &= ~change; \ - res |= (new & change); \ - write_c0_##name(res); \ + new = res & ~change; \ + new |= (val & change); \ + write_c0_##name(new); \ \ return res; \ } diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 1a86f84fa947..49aac6e17df9 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -32,7 +32,6 @@ #include <linux/module.h> #include <linux/binfmts.h> #include <linux/security.h> -#include <linux/syscalls.h> #include <linux/compat.h> #include <linux/vfs.h> #include <linux/ipc.h> diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b2d7041341b8..29fadaccecdd 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1520,7 +1520,9 @@ void __cpuinit per_cpu_trap_init(void) #endif /* CONFIG_MIPS_MT_SMTC */ if (cpu_has_veic || cpu_has_vint) { + unsigned long sr = set_c0_status(ST0_BEV); write_c0_ebase(ebase); + write_c0_status(sr); /* Setting vector spacing enables EI/VI mode */ change_c0_intctl(0x3e0, VECTORSPACING); } @@ -1602,8 +1604,6 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, #ifdef CONFIG_64BIT unsigned long uncached_ebase = TO_UNCAC(ebase); #endif - if (cpu_has_mips_r2) - uncached_ebase += (read_c0_ebase() & 0x3ffff000); if (!addr) panic(panic_null_cerr); @@ -1635,9 +1635,11 @@ void __init trap_init(void) return; /* Already done */ #endif - if (cpu_has_veic || cpu_has_vint) - ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64); - else { + if (cpu_has_veic || cpu_has_vint) { + unsigned long size = 0x200 + VECTORSPACING*64; + ebase = (unsigned long) + __alloc_bootmem(size, 1 << fls(size), 0); + } else { ebase = CAC_BASE; if (cpu_has_mips_r2) ebase += (read_c0_ebase() & 0x3ffff000); diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index c43f4b26a690..871e828bc62a 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -780,7 +780,7 @@ static void __cpuinit probe_pcache(void) c->dcache.ways = 2; c->dcache.waybit = 0; - c->options |= MIPS_CPU_CACHE_CDEX_P; + c->options |= MIPS_CPU_CACHE_CDEX_P | MIPS_CPU_PREFETCH; break; case CPU_TX49XX: diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 546e6977d4ff..bed56f1ac837 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -225,7 +225,7 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) { unsigned long addr; - addr = plat_dma_addr_to_phys(dma_address); + addr = dma_addr_to_virt(dma_address); dma_cache_wback_inv(addr, size); } diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 8b5ba8261a36..4447def69dc5 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -127,6 +127,13 @@ dcr-reg = <0x010 0x002>; }; + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 2804444812e5..5e6b08ff6f67 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -97,6 +97,13 @@ 0x6 0x4>; /* ECC SEC Error */ }; + CRYPTO: crypto@ef700000 { + compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; + reg = <0xef700000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x2>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 58311a867851..a705fffbb498 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -376,7 +376,7 @@ static int ps3_system_bus_probe(struct device *_dev) struct ps3_system_bus_driver *drv; BUG_ON(!dev); - pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id); + dev_dbg(_dev, "%s:%d\n", __func__, __LINE__); drv = ps3_system_bus_dev_to_system_bus_drv(dev); BUG_ON(!drv); @@ -398,7 +398,7 @@ static int ps3_system_bus_remove(struct device *_dev) struct ps3_system_bus_driver *drv; BUG_ON(!dev); - pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id); + dev_dbg(_dev, "%s:%d\n", __func__, __LINE__); drv = ps3_system_bus_dev_to_system_bus_drv(dev); BUG_ON(!drv); diff --git a/arch/s390/crypto/sha.h b/arch/s390/crypto/sha.h index 1ceafa571eab..f4e9dc71675f 100644 --- a/arch/s390/crypto/sha.h +++ b/arch/s390/crypto/sha.h @@ -29,7 +29,9 @@ struct s390_sha_ctx { int func; /* KIMD function to use */ }; -void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len); -void s390_sha_final(struct crypto_tfm *tfm, u8 *out); +struct shash_desc; + +int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len); +int s390_sha_final(struct shash_desc *desc, u8 *out); #endif diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c index b3cb5a89b00d..e85ba348722a 100644 --- a/arch/s390/crypto/sha1_s390.c +++ b/arch/s390/crypto/sha1_s390.c @@ -23,17 +23,17 @@ * any later version. * */ +#include <crypto/internal/hash.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/crypto.h> #include <crypto/sha.h> #include "crypt_s390.h" #include "sha.h" -static void sha1_init(struct crypto_tfm *tfm) +static int sha1_init(struct shash_desc *desc) { - struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm); + struct s390_sha_ctx *sctx = shash_desc_ctx(desc); sctx->state[0] = SHA1_H0; sctx->state[1] = SHA1_H1; @@ -42,34 +42,36 @@ static void sha1_init(struct crypto_tfm *tfm) sctx->state[4] = SHA1_H4; sctx->count = 0; sctx->func = KIMD_SHA_1; + + return 0; } -static struct crypto_alg alg = { - .cra_name = "sha1", - .cra_driver_name= "sha1-s390", - .cra_priority = CRYPT_S390_PRIORITY, - .cra_flags = CRYPTO_ALG_TYPE_DIGEST, - .cra_blocksize = SHA1_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct s390_sha_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(alg.cra_list), - .cra_u = { .digest = { - .dia_digestsize = SHA1_DIGEST_SIZE, - .dia_init = sha1_init, - .dia_update = s390_sha_update, - .dia_final = s390_sha_final } } +static struct shash_alg alg = { + .digestsize = SHA1_DIGEST_SIZE, + .init = sha1_init, + .update = s390_sha_update, + .final = s390_sha_final, + .descsize = sizeof(struct s390_sha_ctx), + .base = { + .cra_name = "sha1", + .cra_driver_name= "sha1-s390", + .cra_priority = CRYPT_S390_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } }; static int __init sha1_s390_init(void) { if (!crypt_s390_func_available(KIMD_SHA_1)) return -EOPNOTSUPP; - return crypto_register_alg(&alg); + return crypto_register_shash(&alg); } static void __exit sha1_s390_fini(void) { - crypto_unregister_alg(&alg); + crypto_unregister_shash(&alg); } module_init(sha1_s390_init); diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c index 19c03fb6ba7e..f9fefc569632 100644 --- a/arch/s390/crypto/sha256_s390.c +++ b/arch/s390/crypto/sha256_s390.c @@ -16,17 +16,17 @@ * any later version. * */ +#include <crypto/internal/hash.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/crypto.h> #include <crypto/sha.h> #include "crypt_s390.h" #include "sha.h" -static void sha256_init(struct crypto_tfm *tfm) +static int sha256_init(struct shash_desc *desc) { - struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm); + struct s390_sha_ctx *sctx = shash_desc_ctx(desc); sctx->state[0] = SHA256_H0; sctx->state[1] = SHA256_H1; @@ -38,22 +38,24 @@ static void sha256_init(struct crypto_tfm *tfm) sctx->state[7] = SHA256_H7; sctx->count = 0; sctx->func = KIMD_SHA_256; + + return 0; } -static struct crypto_alg alg = { - .cra_name = "sha256", - .cra_driver_name = "sha256-s390", - .cra_priority = CRYPT_S390_PRIORITY, - .cra_flags = CRYPTO_ALG_TYPE_DIGEST, - .cra_blocksize = SHA256_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct s390_sha_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(alg.cra_list), - .cra_u = { .digest = { - .dia_digestsize = SHA256_DIGEST_SIZE, - .dia_init = sha256_init, - .dia_update = s390_sha_update, - .dia_final = s390_sha_final } } +static struct shash_alg alg = { + .digestsize = SHA256_DIGEST_SIZE, + .init = sha256_init, + .update = s390_sha_update, + .final = s390_sha_final, + .descsize = sizeof(struct s390_sha_ctx), + .base = { + .cra_name = "sha256", + .cra_driver_name= "sha256-s390", + .cra_priority = CRYPT_S390_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } }; static int sha256_s390_init(void) @@ -61,12 +63,12 @@ static int sha256_s390_init(void) if (!crypt_s390_func_available(KIMD_SHA_256)) return -EOPNOTSUPP; - return crypto_register_alg(&alg); + return crypto_register_shash(&alg); } static void __exit sha256_s390_fini(void) { - crypto_unregister_alg(&alg); + crypto_unregister_shash(&alg); } module_init(sha256_s390_init); diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c index 23c7861f6aeb..83192bfc8048 100644 --- a/arch/s390/crypto/sha512_s390.c +++ b/arch/s390/crypto/sha512_s390.c @@ -12,16 +12,16 @@ * any later version. * */ +#include <crypto/internal/hash.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/crypto.h> #include "sha.h" #include "crypt_s390.h" -static void sha512_init(struct crypto_tfm *tfm) +static int sha512_init(struct shash_desc *desc) { - struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm); + struct s390_sha_ctx *ctx = shash_desc_ctx(desc); *(__u64 *)&ctx->state[0] = 0x6a09e667f3bcc908ULL; *(__u64 *)&ctx->state[2] = 0xbb67ae8584caa73bULL; @@ -33,29 +33,31 @@ static void sha512_init(struct crypto_tfm *tfm) *(__u64 *)&ctx->state[14] = 0x5be0cd19137e2179ULL; ctx->count = 0; ctx->func = KIMD_SHA_512; + + return 0; } -static struct crypto_alg sha512_alg = { - .cra_name = "sha512", - .cra_driver_name = "sha512-s390", - .cra_priority = CRYPT_S390_PRIORITY, - .cra_flags = CRYPTO_ALG_TYPE_DIGEST, - .cra_blocksize = SHA512_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct s390_sha_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(sha512_alg.cra_list), - .cra_u = { .digest = { - .dia_digestsize = SHA512_DIGEST_SIZE, - .dia_init = sha512_init, - .dia_update = s390_sha_update, - .dia_final = s390_sha_final } } +static struct shash_alg sha512_alg = { + .digestsize = SHA512_DIGEST_SIZE, + .init = sha512_init, + .update = s390_sha_update, + .final = s390_sha_final, + .descsize = sizeof(struct s390_sha_ctx), + .base = { + .cra_name = "sha512", + .cra_driver_name= "sha512-s390", + .cra_priority = CRYPT_S390_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA512_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } }; MODULE_ALIAS("sha512"); -static void sha384_init(struct crypto_tfm *tfm) +static int sha384_init(struct shash_desc *desc) { - struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm); + struct s390_sha_ctx *ctx = shash_desc_ctx(desc); *(__u64 *)&ctx->state[0] = 0xcbbb9d5dc1059ed8ULL; *(__u64 *)&ctx->state[2] = 0x629a292a367cd507ULL; @@ -67,22 +69,25 @@ static void sha384_init(struct crypto_tfm *tfm) *(__u64 *)&ctx->state[14] = 0x47b5481dbefa4fa4ULL; ctx->count = 0; ctx->func = KIMD_SHA_512; + + return 0; } -static struct crypto_alg sha384_alg = { - .cra_name = "sha384", - .cra_driver_name = "sha384-s390", - .cra_priority = CRYPT_S390_PRIORITY, - .cra_flags = CRYPTO_ALG_TYPE_DIGEST, - .cra_blocksize = SHA384_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct s390_sha_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(sha384_alg.cra_list), - .cra_u = { .digest = { - .dia_digestsize = SHA384_DIGEST_SIZE, - .dia_init = sha384_init, - .dia_update = s390_sha_update, - .dia_final = s390_sha_final } } +static struct shash_alg sha384_alg = { + .digestsize = SHA384_DIGEST_SIZE, + .init = sha384_init, + .update = s390_sha_update, + .final = s390_sha_final, + .descsize = sizeof(struct s390_sha_ctx), + .base = { + .cra_name = "sha384", + .cra_driver_name= "sha384-s390", + .cra_priority = CRYPT_S390_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA384_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct s390_sha_ctx), + .cra_module = THIS_MODULE, + } }; MODULE_ALIAS("sha384"); @@ -93,18 +98,18 @@ static int __init init(void) if (!crypt_s390_func_available(KIMD_SHA_512)) return -EOPNOTSUPP; - if ((ret = crypto_register_alg(&sha512_alg)) < 0) + if ((ret = crypto_register_shash(&sha512_alg)) < 0) goto out; - if ((ret = crypto_register_alg(&sha384_alg)) < 0) - crypto_unregister_alg(&sha512_alg); + if ((ret = crypto_register_shash(&sha384_alg)) < 0) + crypto_unregister_shash(&sha512_alg); out: return ret; } static void __exit fini(void) { - crypto_unregister_alg(&sha512_alg); - crypto_unregister_alg(&sha384_alg); + crypto_unregister_shash(&sha512_alg); + crypto_unregister_shash(&sha384_alg); } module_init(init); diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c index 9d6eb8c3d37e..7903ec47e6b9 100644 --- a/arch/s390/crypto/sha_common.c +++ b/arch/s390/crypto/sha_common.c @@ -13,14 +13,14 @@ * */ -#include <linux/crypto.h> +#include <crypto/internal/hash.h> #include "sha.h" #include "crypt_s390.h" -void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len) +int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len) { - struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm); - unsigned int bsize = crypto_tfm_alg_blocksize(tfm); + struct s390_sha_ctx *ctx = shash_desc_ctx(desc); + unsigned int bsize = crypto_shash_blocksize(desc->tfm); unsigned int index; int ret; @@ -51,13 +51,15 @@ void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len) store: if (len) memcpy(ctx->buf + index , data, len); + + return 0; } EXPORT_SYMBOL_GPL(s390_sha_update); -void s390_sha_final(struct crypto_tfm *tfm, u8 *out) +int s390_sha_final(struct shash_desc *desc, u8 *out) { - struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm); - unsigned int bsize = crypto_tfm_alg_blocksize(tfm); + struct s390_sha_ctx *ctx = shash_desc_ctx(desc); + unsigned int bsize = crypto_shash_blocksize(desc->tfm); u64 bits; unsigned int index, end, plen; int ret; @@ -87,9 +89,11 @@ void s390_sha_final(struct crypto_tfm *tfm, u8 *out) BUG_ON(ret != end); /* copy digest to out */ - memcpy(out, ctx->state, crypto_hash_digestsize(crypto_hash_cast(tfm))); + memcpy(out, ctx->state, crypto_shash_digestsize(desc->tfm)); /* wipe context */ memset(ctx, 0, sizeof *ctx); + + return 0; } EXPORT_SYMBOL_GPL(s390_sha_final); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ebabe518e729..8d50d527c595 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -107,6 +107,9 @@ config SYS_SUPPORTS_NUMA config SYS_SUPPORTS_PCI bool +config SYS_SUPPORTS_CMT + bool + config STACKTRACE_SUPPORT def_bool y @@ -176,6 +179,10 @@ config CPU_SHX2 config CPU_SHX3 bool +config ARCH_SHMOBILE + bool + select ARCH_SUSPEND_POSSIBLE + choice prompt "Processor sub-type selection" @@ -188,6 +195,7 @@ choice config CPU_SUBTYPE_SH7619 bool "Support SH7619 processor" select CPU_SH2 + select SYS_SUPPORTS_CMT # SH-2A Processor Support @@ -200,15 +208,18 @@ config CPU_SUBTYPE_SH7203 bool "Support SH7203 processor" select CPU_SH2A select CPU_HAS_FPU + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7263 bool "Support SH7263 processor" select CPU_SH2A select CPU_HAS_FPU + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_MXG bool "Support MX-G processor" @@ -323,7 +334,9 @@ config CPU_SUBTYPE_SH7723 bool "Support SH7723 processor" select CPU_SH4A select CPU_SHX2 + select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_CMT help Select SH7723 if you have an SH-MobileR2 CPU. @@ -348,6 +361,14 @@ config CPU_SUBTYPE_SH7785 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA +config CPU_SUBTYPE_SH7786 + bool "Support SH7786 processor" + select CPU_SH4A + select CPU_SHX3 + select CPU_HAS_PTEAEX + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" select CPU_SH4A @@ -362,20 +383,26 @@ config CPU_SUBTYPE_SHX3 config CPU_SUBTYPE_SH7343 bool "Support SH7343 processor" select CPU_SH4AL_DSP + select ARCH_SHMOBILE + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7722 bool "Support SH7722 processor" select CPU_SH4AL_DSP select CPU_SHX2 + select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7366 bool "Support SH7366 processor" select CPU_SH4AL_DSP select CPU_SHX2 + select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_CMT # SH-5 Processor Support @@ -398,25 +425,34 @@ source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" config SH_TMU - def_bool y - prompt "TMU timer support" + bool "TMU timer support" depends on CPU_SH3 || CPU_SH4 + default y select GENERIC_TIME select GENERIC_CLOCKEVENTS help This enables the use of the TMU as the system timer. config SH_CMT - def_bool y - prompt "CMT timer support" - depends on CPU_SH2 && !CPU_SUBTYPE_MXG + bool "CMT timer support" + depends on SYS_SUPPORTS_CMT && CPU_SH2 + default y help This enables the use of the CMT as the system timer. +# +# Support for the new-style CMT driver. This will replace SH_CMT +# once its other dependencies are merged. +# +config SH_TIMER_CMT + bool "CMT clockevents driver" + depends on SYS_SUPPORTS_CMT && !SH_CMT + select GENERIC_CLOCKEVENTS + config SH_MTU2 - def_bool n - prompt "MTU2 timer support" + bool "MTU2 timer support" depends on CPU_SH2A + default y help This enables the use of the MTU2 as the system timer. @@ -426,7 +462,8 @@ config SH_TIMER_IRQ CPU_SUBTYPE_SH7763 default "86" if CPU_SUBTYPE_SH7619 default "140" if CPU_SUBTYPE_SH7206 - default "142" if CPU_SUBTYPE_SH7203 + default "142" if CPU_SUBTYPE_SH7203 && SH_CMT + default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2 default "238" if CPU_SUBTYPE_MXG default "16" @@ -438,7 +475,8 @@ config SH_PCLK_FREQ default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ - CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG + CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \ + CPU_SUBTYPE_SH7786 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" @@ -521,6 +559,13 @@ config CRASH_DUMP For more details see Documentation/kdump/kdump.txt +config KEXEC_JUMP + bool "kexec jump (EXPERIMENTAL)" + depends on SUPERH32 && KEXEC && HIBERNATION && EXPERIMENTAL + help + Jump between original kernel and kexeced kernel and invoke + code via KEXEC + config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" depends on PROC_FS diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu index 0e27fe3b182b..c7d704381a6d 100644 --- a/arch/sh/Kconfig.cpu +++ b/arch/sh/Kconfig.cpu @@ -104,6 +104,9 @@ config CPU_HAS_SR_RB config CPU_HAS_PTEA bool +config CPU_HAS_PTEAEX + bool + config CPU_HAS_DSP bool diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4067b0d9287b..bece1f7535f2 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -80,6 +80,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ defaultimage-$(CONFIG_SUPERH32) := zImage defaultimage-$(CONFIG_SH_SH7785LCR) := uImage defaultimage-$(CONFIG_SH_RSK) := uImage +defaultimage-$(CONFIG_SH_URQUELL) := uImage defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 861914747e4e..dcc1af8a2cfe 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -155,17 +155,22 @@ config SH_SH7785LCR config SH_SH7785LCR_29BIT_PHYSMAPS bool "SH7785LCR 29bit physmaps" - depends on SH_SH7785LCR + depends on SH_SH7785LCR && 29BIT default y help This board has 2 physical memory maps. It can be changed with DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, you can access all on-board device in 29bit address mode. +config SH_URQUELL + bool "Urquell" + depends on CPU_SUBTYPE_SH7786 + select ARCH_REQUIRE_GPIOLIB + config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. @@ -173,7 +178,7 @@ config SH_MIGOR config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" @@ -185,6 +190,13 @@ config SH_SH7763RDP Select SH7763RDP if configuring for a Renesas SH7763 evaluation board. +config SH_ESPT + bool "ESPT" + depends on CPU_SUBTYPE_SH7763 + help + Select ESPT if configuring for a Renesas SH7763 + with gigabit ether evaluation board. + config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705 @@ -240,7 +252,7 @@ config SH_X3PROTO config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Select Magic Panel R2 if configuring for Magic Panel R2. @@ -249,6 +261,13 @@ config SH_CAYMAN depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 select SYS_SUPPORTS_PCI +config SH_POLARIS + bool "SMSC Polaris" + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7709 + help + Select if configuring for an SMSC Polaris development board + endmenu source "arch/sh/boards/mach-r2d/Kconfig" diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index 269ae2be49ef..7baa21090231 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -4,5 +4,8 @@ obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o +obj-$(CONFIG_SH_URQUELL) += board-urquell.o obj-$(CONFIG_SH_SHMIN) += board-shmin.o obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o +obj-$(CONFIG_SH_ESPT) += board-espt.o +obj-$(CONFIG_SH_POLARIS) += board-polaris.o diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 15b6d450fbf0..a64e38841c49 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -166,6 +166,16 @@ static void ap320_wvga_power_on(void *board_data) ctrl_outw(0x100, FPGA_BKLREG); } +static void ap320_wvga_power_off(void *board_data) +{ + /* backlight */ + ctrl_outw(0, FPGA_BKLREG); + gpio_set_value(GPIO_PTS3, 1); + + /* ASD AP-320/325 LCD OFF */ + ctrl_outw(0, FPGA_LCDREG); +} + static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { @@ -191,6 +201,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { }, .board_cfg = { .display_on = ap320_wvga_power_on, + .display_off = ap320_wvga_power_off, }, } }; diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c new file mode 100644 index 000000000000..d5ce5e18eb37 --- /dev/null +++ b/arch/sh/boards/board-espt.c @@ -0,0 +1,102 @@ +/* + * Data Technology Inc. ESPT-GIGA board suport + * + * Copyright (C) 2008, 2009 Renesas Solutions Corp. + * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mtd/physmap.h> +#include <linux/io.h> +#include <asm/machvec.h> +#include <asm/sizes.h> +#include <asm/sh_eth.h> + +/* NOR Flash */ +static struct mtd_partition espt_nor_flash_partitions[] = { + { + .name = "U-Boot", + .offset = 0, + .size = (2 * SZ_128K), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "Linux-Kernel", + .offset = MTDPART_OFS_APPEND, + .size = (20 * SZ_128K), + }, { + .name = "Root Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data espt_nor_flash_data = { + .width = 2, + .parts = espt_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(espt_nor_flash_partitions), +}; + +static struct resource espt_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0, + .end = SZ_8M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device espt_nor_flash_device = { + .name = "physmap-flash", + .resource = espt_nor_flash_resources, + .num_resources = ARRAY_SIZE(espt_nor_flash_resources), + .dev = { + .platform_data = &espt_nor_flash_data, + }, +}; + +/* SH-Ether */ +static struct resource sh_eth_resources[] = { + { + .start = 0xFEE00800, /* use eth1 */ + .end = 0xFEE00F7C - 1, + .flags = IORESOURCE_MEM, + }, { + .start = 57, /* irq number */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_eth_plat_data sh7763_eth_pdata = { + .phy = 0, + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device espt_eth_device = { + .name = "sh-eth", + .resource = sh_eth_resources, + .num_resources = ARRAY_SIZE(sh_eth_resources), + .dev = { + .platform_data = &sh7763_eth_pdata, + }, +}; + +static struct platform_device *espt_devices[] __initdata = { + &espt_nor_flash_device, + &espt_eth_device, +}; + +static int __init espt_devices_setup(void) +{ + return platform_add_devices(espt_devices, + ARRAY_SIZE(espt_devices)); +} +device_initcall(espt_devices_setup); + +static struct sh_machine_vector mv_espt __initmv = { + .mv_name = "ESPT-GIGA", +}; diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c new file mode 100644 index 000000000000..62607eb51004 --- /dev/null +++ b/arch/sh/boards/board-polaris.c @@ -0,0 +1,149 @@ +/* + * June 2006 steve.glendinning@smsc.com + * + * Polaris-specific resource declaration + * + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <linux/io.h> +#include <asm/irq.h> +#include <asm/machvec.h> +#include <asm/heartbeat.h> +#include <cpu/gpio.h> +#include <mach-se/mach/se.h> + +#define BCR2 (0xFFFFFF62) +#define WCR2 (0xFFFFFF66) +#define AREA5_WAIT_CTRL (0x1C00) +#define WAIT_STATES_10 (0x7) + +static struct resource smsc911x_resources[] = { + [0] = { + .name = "smsc911x-memory", + .start = PA_EXT5, + .end = PA_EXT5 + 0x1fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smsc911x-irq", + .start = IRQ0_IRQ, + .end = IRQ0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 8, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PORT_PCDR, + .end = PORT_PCDR, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *polaris_devices[] __initdata = { + &smsc911x_device, + &heartbeat_device, +}; + +static int __init polaris_initialise(void) +{ + u16 wcr, bcr_mask; + + printk(KERN_INFO "Configuring Polaris external bus\n"); + + /* Configure area 5 with 2 wait states */ + wcr = ctrl_inw(WCR2); + wcr &= (~AREA5_WAIT_CTRL); + wcr |= (WAIT_STATES_10 << 10); + ctrl_outw(wcr, WCR2); + + /* Configure area 5 for 32-bit access */ + bcr_mask = ctrl_inw(BCR2); + bcr_mask |= 1 << 10; + ctrl_outw(bcr_mask, BCR2); + + return platform_add_devices(polaris_devices, + ARRAY_SIZE(polaris_devices)); +} +arch_initcall(polaris_initialise); + +static struct ipr_data ipr_irq_table[] = { + /* External IRQs */ + { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */ + { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */ +}; + +static unsigned long ipr_offsets[] = { + INTC_IPRC +}; + +static struct ipr_desc ipr_irq_desc = { + .ipr_offsets = ipr_offsets, + .nr_offsets = ARRAY_SIZE(ipr_offsets), + + .ipr_data = ipr_irq_table, + .nr_irqs = ARRAY_SIZE(ipr_irq_table), + .chip = { + .name = "sh7709-ext", + }, +}; + +static void __init init_polaris_irq(void) +{ + /* Disable all interrupts */ + ctrl_outw(0, BCR_ILCRA); + ctrl_outw(0, BCR_ILCRB); + ctrl_outw(0, BCR_ILCRC); + ctrl_outw(0, BCR_ILCRD); + ctrl_outw(0, BCR_ILCRE); + ctrl_outw(0, BCR_ILCRF); + ctrl_outw(0, BCR_ILCRG); + + register_ipr_controller(&ipr_irq_desc); +} + +static struct sh_machine_vector mv_polaris __initmv = { + .mv_name = "Polaris", + .mv_nr_irqs = 61, + .mv_init_irq = init_polaris_irq, +}; diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index 38a64968d7bf..94c0296bc35d 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -275,7 +275,18 @@ void __init init_sh7785lcr_IRQ(void) static void sh7785lcr_power_off(void) { - ctrl_outb(0x01, P2SEGADDR(PLD_POFCR)); + unsigned char *p; + + p = ioremap(PLD_POFCR, PLD_POFCR + 1); + if (!p) { + printk(KERN_ERR "%s: ioremap error.\n", __func__); + return; + } + *p = 0x01; + iounmap(p); + set_bl_bit(); + while (1) + cpu_relax(); } /* Initialize the board */ diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c new file mode 100644 index 000000000000..17036ce20086 --- /dev/null +++ b/arch/sh/boards/board-urquell.c @@ -0,0 +1,162 @@ +/* + * Renesas Technology Corp. SH7786 Urquell Support. + * + * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com> + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/smc91x.h> +#include <linux/mtd/physmap.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <mach/urquell.h> +#include <cpu/sh7786.h> +#include <asm/heartbeat.h> +#include <asm/sizes.h> + +static struct resource heartbeat_resources[] = { + [0] = { + .start = BOARDREG(SLEDR), + .end = BOARDREG(SLEDR), + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + +static struct resource smc91x_eth_resources[] = { + [0] = { + .name = "SMC91C111" , + .start = 0x05800300, + .end = 0x0580030f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 11, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_eth_device = { + .name = "smc91x", + .num_resources = ARRAY_SIZE(smc91x_eth_resources), + .resource = smc91x_eth_resources, + .dev = { + .platform_data = &smc91x_info, + }, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = NOR_FLASH_ADDR, + .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct platform_device *urquell_devices[] __initdata = { + &heartbeat_device, + &smc91x_eth_device, + &nor_flash_device, +}; + +static int __init urquell_devices_setup(void) +{ + /* USB */ + gpio_request(GPIO_FN_USB_OVC0, NULL); + gpio_request(GPIO_FN_USB_PENC0, NULL); + + return platform_add_devices(urquell_devices, + ARRAY_SIZE(urquell_devices)); +} +device_initcall(urquell_devices_setup); + +static void urquell_power_off(void) +{ + __raw_writew(0xa5a5, UBOARDREG(SRSTR)); +} + +static void __init urquell_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); +} + +/* Initialize the board */ +static void __init urquell_setup(char **cmdline_p) +{ + printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n"); + + pm_power_off = urquell_power_off; +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_urquell __initmv = { + .mv_name = "Urquell", + .mv_setup = urquell_setup, + .mv_init_irq = urquell_init_irq, +}; diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig index 08057f62687b..def49cc0a7b9 100644 --- a/arch/sh/boards/mach-highlander/Kconfig +++ b/arch/sh/boards/mach-highlander/Kconfig @@ -18,7 +18,7 @@ config SH_R7780MP config SH_R7785RP bool "R7785RP board support" depends on CPU_SUBTYPE_SH7785 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB endchoice diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S index 44b648cf6f23..4f18d44e0541 100644 --- a/arch/sh/boards/mach-hp6xx/pm_wakeup.S +++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S @@ -10,47 +10,32 @@ #include <linux/linkage.h> #include <cpu/mmu_context.h> -#define k0 r0 -#define k1 r1 -#define k2 r2 -#define k3 r3 -#define k4 r4 - /* * Kernel mode register usage: * k0 scratch * k1 scratch - * k2 scratch (Exception code) - * k3 scratch (Return address) - * k4 scratch - * k5 reserved - * k6 Global Interrupt Mask (0--15 << 4) - * k7 CURRENT_THREAD_INFO (pointer to current thread info) + * For more details, please have a look at entry.S */ +#define k0 r0 +#define k1 r1 + ENTRY(wakeup_start) ! clear STBY bit - mov #-126, k2 + mov #-126, k1 and #127, k0 - mov.b k0, @k2 + mov.b k0, @k1 ! enable refresh mov.l 5f, k1 mov.w 6f, k0 mov.w k0, @k1 ! jump to handler - mov.l 2f, k2 - mov.l 3f, k3 - mov.l @k2, k2 - mov.l 4f, k1 jmp @k1 - nop + nop .align 2 -1: .long EXPEVT -2: .long INTEVT -3: .long ret_from_irq -4: .long handle_exception +4: .long handle_interrupt 5: .long 0xffffff68 6: .word 0x0524 diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c index 746742bdc014..8f305b36358b 100644 --- a/arch/sh/boards/mach-hp6xx/setup.c +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -115,7 +115,6 @@ static struct sh_machine_vector mv_hp6xx __initmv = { .mv_setup = hp6xx_setup, /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, - .mv_irq_demux = hd64461_irq_demux, /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ .mv_init_irq = hp6xx_init_irq, }; diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 28e56c5809a2..bc35b4cae6b3 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -450,6 +450,14 @@ static struct spi_board_info migor_spi_devices[] = { static int __init migor_devices_setup(void) { + +#ifdef CONFIG_PM + /* Let D11 LED show STATUS0 */ + gpio_request(GPIO_FN_STATUS0, NULL); + + /* Lit D12 LED show PDSTATUS */ + gpio_request(GPIO_FN_PDSTATUS, NULL); +#else /* Lit D11 LED */ gpio_request(GPIO_PTJ7, NULL); gpio_direction_output(GPIO_PTJ7, 1); @@ -459,6 +467,7 @@ static int __init migor_devices_setup(void) gpio_request(GPIO_PTJ5, NULL); gpio_direction_output(GPIO_PTJ5, 1); gpio_export(GPIO_PTJ5, 0); +#endif /* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */ gpio_request(GPIO_FN_IRQ0, NULL); diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig index bff095dffc02..aeff3b042205 100644 --- a/arch/sh/boards/mach-rsk/Kconfig +++ b/arch/sh/boards/mach-rsk/Kconfig @@ -10,7 +10,7 @@ config SH_RSK7201 config SH_RSK7203 bool "RSK7203" - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB depends on CPU_SUBTYPE_SH7203 endchoice diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index 6f926fd2162b..390534a0b35c 100644 --- a/arch/sh/boards/mach-sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -63,15 +63,19 @@ static struct platform_device sh7763rdp_nor_flash_device = { }, }; -/* SH-Ether */ +/* + * SH-Ether + * + * SH Ether of SH7763 has multi IRQ handling. + * (57,58,59 -> 57) + */ static struct resource sh_eth_resources[] = { { .start = 0xFEE00800, /* use eth1 */ .end = 0xFEE00F7C - 1, .flags = IORESOURCE_MEM, }, { - .start = 58, /* irq number */ - .end = 58, + .start = 57, /* irq number */ .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index c16ccd4bfa16..95483d161258 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -33,20 +33,24 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -ifeq ($(CONFIG_32BIT),y) -KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \ - $$[$(CONFIG_PAGE_OFFSET) + \ - $(CONFIG_ZERO_PAGE_OFFSET)]') -else +KERNEL_MEMORY := 0x00000000 +ifeq ($(CONFIG_PMB_FIXED),y) +KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \ + $$[$(CONFIG_MEMORY_START) & 0x1fffffff]') +endif +ifeq ($(CONFIG_29BIT),y) +KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \ + $$[$(CONFIG_MEMORY_START)]') +endif + KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET) + \ - $(CONFIG_MEMORY_START) + \ + $(KERNEL_MEMORY) + \ $(CONFIG_ZERO_PAGE_OFFSET)]') -endif KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET) + \ - $(CONFIG_MEMORY_START) + \ + $(KERNEL_MEMORY) + \ $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]') quiet_cmd_uimage = UIMAGE $@ diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c index 27ceeb948bb1..25ef91061521 100644 --- a/arch/sh/cchips/hd6446x/hd64461.c +++ b/arch/sh/cchips/hd6446x/hd64461.c @@ -53,21 +53,22 @@ static struct irq_chip hd64461_irq_chip = { .unmask = hd64461_unmask_irq, }; -int hd64461_irq_demux(int irq) +static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc) { - if (irq == CONFIG_HD64461_IRQ) { - unsigned short bit; - unsigned short nirr = inw(HD64461_NIRR); - unsigned short nimr = inw(HD64461_NIMR); - int i; - - nirr &= ~nimr; - for (bit = 1, i = 0; i < 16; bit <<= 1, i++) - if (nirr & bit) - break; - irq = HD64461_IRQBASE + i; + unsigned short intv = ctrl_inw(HD64461_NIRR); + struct irq_desc *ext_desc; + unsigned int ext_irq = HD64461_IRQBASE; + + intv &= (1 << HD64461_IRQ_NUM) - 1; + + while (intv) { + if (intv & 1) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; } - return irq; } int __init setup_hd64461(void) @@ -93,6 +94,9 @@ int __init setup_hd64461(void) set_irq_chip_and_handler(i, &hd64461_irq_chip, handle_level_irq); + set_irq_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux); + set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW); + #ifdef CONFIG_HD64461_ENABLER printk(KERN_INFO "HD64461: enabling PCMCIA devices\n"); __raw_writeb(0x4c, HD64461_PCC1CSCIER); diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig new file mode 100644 index 000000000000..873ec42c6e69 --- /dev/null +++ b/arch/sh/configs/espt_defconfig @@ -0,0 +1,1190 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc7 +# Tue Mar 17 13:25:58 2009 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +CONFIG_CPU_SUBTYPE_SH7763=y +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SH7786 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_SH7763RDP is not set +CONFIG_SH_ESPT=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SH_ETH=y +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_BOTH_ENDIAN=y +# CONFIG_FB_BIG_ENDIAN is not set +# CONFIG_FB_LITTLE_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set +CONFIG_FB_SH7760=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_SUPERH_MONO=y +CONFIG_LOGO_SUPERH_VGA16=y +CONFIG_LOGO_SUPERH_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig new file mode 100644 index 000000000000..320def233b2f --- /dev/null +++ b/arch/sh/configs/polaris_defconfig @@ -0,0 +1,969 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc4 +# Wed Feb 11 18:41:59 2009 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System type +# +CONFIG_CPU_SH3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +CONFIG_CPU_SUBTYPE_SH7709=y +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0C000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU_EMU=y +CONFIG_SH_ADC=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Board support +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_HP6XX is not set +CONFIG_SH_POLARIS=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=33000000 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA_API=y +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=4 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_COMPAT=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_WRITEBUFFER is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +# CONFIG_PROVE_LOCKING is not set +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_DEBUG_SG=y +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000 +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig new file mode 100644 index 000000000000..54e1dee8e24a --- /dev/null +++ b/arch/sh/configs/sh7785lcr_32bit_defconfig @@ -0,0 +1,1553 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc4 +# Fri Feb 20 18:25:29 2009 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_IO_TRAPPED=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +CONFIG_CPU_SUBTYPE_SH7785=y +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x40000000 +CONFIG_MEMORY_SIZE=0x20000000 +# CONFIG_29BIT is not set +CONFIG_32BIT=y +CONFIG_PMB_ENABLE=y +# CONFIG_PMB is not set +CONFIG_PMB_FIXED=y +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_HIGHLANDER is not set +CONFIG_SH_SH7785LCR=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_MII=y +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +# CONFIG_LOGO_SUPERH_CLUT224 is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SH is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_DUMP_CODE is not set +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig new file mode 100644 index 000000000000..be726c7cdf91 --- /dev/null +++ b/arch/sh/configs/urquell_defconfig @@ -0,0 +1,1332 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc4 +# Thu Mar 5 17:28:13 2009 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +CONFIG_CPU_SUBTYPE_SH7786=y +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_URQUELL=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel root=/dev/nfs ip=dhcp memchunk.vpu=4m" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +CONFIG_MFD_SM501=y +# CONFIG_MFD_SM501_GPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=m +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +# CONFIG_LOGO_SUPERH_CLUT224 is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 01936368b8b0..f13a05285a9d 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -9,13 +9,21 @@ config SH_DMA select SH_DMA_API default n +config SH_DMA_IRQ_MULTI + bool + depends on SH_DMA + default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \ + CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \ + CPU_SUBTYPE_SH7091 || CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \ + CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + config NR_ONCHIP_DMA_CHANNELS int depends on SH_DMA - default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 - default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R - default "12" if CPU_SUBTYPE_SH7780 - default "4" + default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7750S + default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7760 + default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + default "6" help This allows you to specify the number of channels that the on-chip DMAC supports. This will be 4 for SH7750/SH7751 and 8 for the @@ -46,4 +54,28 @@ config SH_DMABRG of the SH7760. Say Y if you want to use Audio/USB DMA on your SH7760 board. +config PVR2_DMA + tristate "PowerVR 2 DMAC support" + depends on SH_DREAMCAST && SH_DMA + help + Selecting this will enable support for the PVR2 DMA controller. + As this chains off of the on-chip DMAC, that must also be + enabled by default. + + This is primarily used by the pvr2fb framebuffer driver for + certain optimizations, but is not necessary for functionality. + + If in doubt, say N. + +config G2_DMA + tristate "G2 Bus DMA support" + depends on SH_DREAMCAST + select SH_DMA_API + help + This enables support for the DMA controller for the Dreamcast's + G2 bus. Drivers that want this will generally enable this on + their own. + + If in doubt, say N. + endmenu diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile index ab956adacb47..c6068137b46f 100644 --- a/arch/sh/drivers/dma/Makefile +++ b/arch/sh/drivers/dma/Makefile @@ -4,5 +4,6 @@ obj-$(CONFIG_SH_DMA_API) += dma-api.o dma-sysfs.o obj-$(CONFIG_SH_DMA) += dma-sh.o -obj-$(CONFIG_SH_DREAMCAST) += dma-pvr2.o dma-g2.o +obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o +obj-$(CONFIG_G2_DMA) += dma-g2.o obj-$(CONFIG_SH_DMABRG) += dmabrg.o diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 50887a592dd0..37fb5b8bbc3f 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -17,28 +17,16 @@ #include <mach-dreamcast/mach/dma.h> #include <asm/dma.h> #include <asm/io.h> -#include "dma-sh.h" - -static int dmte_irq_map[] = { - DMTE0_IRQ, - DMTE1_IRQ, - DMTE2_IRQ, - DMTE3_IRQ, -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) - DMTE4_IRQ, - DMTE5_IRQ, -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) - DMTE6_IRQ, - DMTE7_IRQ, +#include <asm/dma-sh.h> + +#if defined(DMAE1_IRQ) +#define NR_DMAE 2 +#else +#define NR_DMAE 1 #endif + +static const char *dmae_name[] = { + "DMAC Address Error0", "DMAC Address Error1" }; static inline unsigned int get_dmte_irq(unsigned int chan) @@ -46,7 +34,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan) unsigned int irq = 0; if (chan < ARRAY_SIZE(dmte_irq_map)) irq = dmte_irq_map[chan]; + +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + if (irq > DMTE6_IRQ) + return DMTE6_IRQ; + return DMTE0_IRQ; +#else return irq; +#endif } /* @@ -59,7 +54,7 @@ static inline unsigned int get_dmte_irq(unsigned int chan) */ static inline unsigned int calc_xmit_shift(struct dma_channel *chan) { - u32 chcr = ctrl_inl(CHCR[chan->chan]); + u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT]; } @@ -75,13 +70,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id) struct dma_channel *chan = dev_id; u32 chcr; - chcr = ctrl_inl(CHCR[chan->chan]); + chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); if (!(chcr & CHCR_TE)) return IRQ_NONE; chcr &= ~(CHCR_IE | CHCR_DE); - ctrl_outl(chcr, CHCR[chan->chan]); + ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); wake_up(&chan->wait_queue); @@ -94,7 +89,12 @@ static int sh_dmac_request_dma(struct dma_channel *chan) return 0; return request_irq(get_dmte_irq(chan->chan), dma_tei, - IRQF_DISABLED, chan->dev_id, chan); +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + IRQF_SHARED, +#else + IRQF_DISABLED, +#endif + chan->dev_id, chan); } static void sh_dmac_free_dma(struct dma_channel *chan) @@ -115,7 +115,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) chan->flags &= ~DMA_TEI_CAPABLE; } - ctrl_outl(chcr, CHCR[chan->chan]); + ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); chan->flags |= DMA_CONFIGURED; return 0; @@ -126,13 +126,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan) int irq; u32 chcr; - chcr = ctrl_inl(CHCR[chan->chan]); + chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); chcr |= CHCR_DE; if (chan->flags & DMA_TEI_CAPABLE) chcr |= CHCR_IE; - ctrl_outl(chcr, CHCR[chan->chan]); + ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); if (chan->flags & DMA_TEI_CAPABLE) { irq = get_dmte_irq(chan->chan); @@ -150,9 +150,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan) disable_irq(irq); } - chcr = ctrl_inl(CHCR[chan->chan]); + chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE); - ctrl_outl(chcr, CHCR[chan->chan]); + ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); } static int sh_dmac_xfer_dma(struct dma_channel *chan) @@ -183,12 +183,13 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan) */ if (chan->sar || (mach_is_dreamcast() && chan->chan == PVR2_CASCADE_CHAN)) - ctrl_outl(chan->sar, SAR[chan->chan]); + ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR)); if (chan->dar || (mach_is_dreamcast() && chan->chan == PVR2_CASCADE_CHAN)) - ctrl_outl(chan->dar, DAR[chan->chan]); + ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR)); - ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]); + ctrl_outl(chan->count >> calc_xmit_shift(chan), + (dma_base_addr[chan->chan] + TCR)); sh_dmac_enable_dma(chan); @@ -197,36 +198,26 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan) static int sh_dmac_get_dma_residue(struct dma_channel *chan) { - if (!(ctrl_inl(CHCR[chan->chan]) & CHCR_DE)) + if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE)) return 0; - return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan); + return ctrl_inl(dma_base_addr[chan->chan] + TCR) + << calc_xmit_shift(chan); } -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -#define dmaor_read_reg() ctrl_inw(DMAOR) -#define dmaor_write_reg(data) ctrl_outw(data, DMAOR) -#else -#define dmaor_read_reg() ctrl_inl(DMAOR) -#define dmaor_write_reg(data) ctrl_outl(data, DMAOR) -#endif - -static inline int dmaor_reset(void) +static inline int dmaor_reset(int no) { - unsigned long dmaor = dmaor_read_reg(); + unsigned long dmaor = dmaor_read_reg(no); /* Try to clear the error flags first, incase they are set */ dmaor &= ~(DMAOR_NMIF | DMAOR_AE); - dmaor_write_reg(dmaor); + dmaor_write_reg(no, dmaor); dmaor |= DMAOR_INIT; - dmaor_write_reg(dmaor); + dmaor_write_reg(no, dmaor); /* See if we got an error again */ - if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) { + if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) { printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n"); return -EINVAL; } @@ -237,10 +228,33 @@ static inline int dmaor_reset(void) #if defined(CONFIG_CPU_SH4) static irqreturn_t dma_err(int irq, void *dummy) { - dmaor_reset(); +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + int cnt = 0; + switch (irq) { +#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ) + case DMTE6_IRQ: + cnt++; +#endif + case DMTE0_IRQ: + if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) { + disable_irq(irq); + /* DMA multi and error IRQ */ + return IRQ_HANDLED; + } + default: + return IRQ_NONE; + } +#else + dmaor_reset(0); +#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) + dmaor_reset(1); +#endif disable_irq(irq); return IRQ_HANDLED; +#endif } #endif @@ -259,24 +273,59 @@ static struct dma_info sh_dmac_info = { .flags = DMAC_CHANNELS_TEI_CAPABLE, }; +#ifdef CONFIG_CPU_SH4 +static unsigned int get_dma_error_irq(int n) +{ +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + return (n == 0) ? get_dmte_irq(0) : get_dmte_irq(6); +#else + return (n == 0) ? DMAE0_IRQ : +#if defined(DMAE1_IRQ) + DMAE1_IRQ; +#else + -1; +#endif +#endif +} +#endif + static int __init sh_dmac_init(void) { struct dma_info *info = &sh_dmac_info; int i; #ifdef CONFIG_CPU_SH4 - i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); - if (unlikely(i < 0)) - return i; + int n; + + for (n = 0; n < NR_DMAE; n++) { + i = request_irq(get_dma_error_irq(n), dma_err, +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + IRQF_SHARED, +#else + IRQF_DISABLED, #endif + dmae_name[n], (void *)dmae_name[n]); + if (unlikely(i < 0)) { + printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]); + return i; + } + } +#endif /* CONFIG_CPU_SH4 */ /* * Initialize DMAOR, and clean up any error flags that may have * been set. */ - i = dmaor_reset(); + i = dmaor_reset(0); + if (unlikely(i != 0)) + return i; +#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) + i = dmaor_reset(1); if (unlikely(i != 0)) return i; +#endif return register_dmac(info); } @@ -284,8 +333,12 @@ static int __init sh_dmac_init(void) static void __exit sh_dmac_exit(void) { #ifdef CONFIG_CPU_SH4 - free_irq(DMAE_IRQ, 0); -#endif + int n; + + for (n = 0; n < NR_DMAE; n++) { + free_irq(get_dma_error_irq(n), (void *)dmae_name[n]); + } +#endif /* CONFIG_CPU_SH4 */ unregister_dmac(&sh_dmac_info); } diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h deleted file mode 100644 index 05fecd5428e4..000000000000 --- a/arch/sh/drivers/dma/dma-sh.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/sh/drivers/dma/dma-sh.h - * - * Copyright (C) 2000 Takashi YOSHII - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __DMA_SH_H -#define __DMA_SH_H - -#include <cpu/dma.h> - -/* Definitions for the SuperH DMAC */ -#define REQ_L 0x00000000 -#define REQ_E 0x00080000 -#define RACK_H 0x00000000 -#define RACK_L 0x00040000 -#define ACK_R 0x00000000 -#define ACK_W 0x00020000 -#define ACK_H 0x00000000 -#define ACK_L 0x00010000 -#define DM_INC 0x00004000 -#define DM_DEC 0x00008000 -#define SM_INC 0x00001000 -#define SM_DEC 0x00002000 -#define RS_IN 0x00000200 -#define RS_OUT 0x00000300 -#define TS_BLK 0x00000040 -#define TM_BUR 0x00000020 -#define CHCR_DE 0x00000001 -#define CHCR_TE 0x00000002 -#define CHCR_IE 0x00000004 - -/* DMAOR definitions */ -#define DMAOR_AE 0x00000004 -#define DMAOR_NMIF 0x00000002 -#define DMAOR_DME 0x00000001 - -/* - * Define the default configuration for dual address memory-memory transfer. - * The 0x400 value represents auto-request, external->external. - */ -#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32) - -#define MAX_DMAC_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) - -/* - * Subtypes that have fewer channels than this simply need to change - * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number - * of channels should expand on this. - * - * For most subtypes we can easily figure these values out with some - * basic calculation, unfortunately on other subtypes these are more - * scattered, so we just leave it unrolled for simplicity. - */ -#define SAR ((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \ - SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \ - SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60}) -#define DAR ((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \ - SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \ - SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64}) -#define DMATCR ((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \ - SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \ - SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68}) -#define CHCR ((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \ - SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \ - SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c}) - -#define DMAOR (SH_DMAC_BASE + 0x40) - -#endif /* __DMA_SH_H */ - diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 078dc44d6b08..773d575a04b9 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -127,8 +127,8 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map) pci_write_reg(word, SH4_PCILSR0); pci_write_reg(0x00000001, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ - word = (CONFIG_MEMORY_SIZE > 0x08000000) ? 0x10000000 : 0x08000000; - pci_write_reg(word | 0xa0000000, SH4_PCILAR0); + word = CONFIG_MEMORY_START | (CONFIG_MEMORY_SIZE - 0x01000000); + pci_write_reg(word, SH4_PCILAR0); pci_write_reg(word, SH7780_PCIMBAR0); /* Set the values on window 1 PCI config registers */ pci_write_reg(0x00000000, SH4_PCILAR1); diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h index 36736c7e93db..80d40813e057 100644 --- a/arch/sh/include/asm/addrspace.h +++ b/arch/sh/include/asm/addrspace.h @@ -31,7 +31,7 @@ /* Returns the physical address of a PnSEG (n=1,2) address */ #define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) -#ifdef CONFIG_29BIT +#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED) /* * Map an address to a certain privileged segment */ @@ -43,7 +43,7 @@ ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) #define P4SEGADDR(a) \ ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) -#endif /* 29BIT */ +#endif /* 29BIT || PMB_FIXED */ #endif /* P1SEG */ /* Check if an address can be reached in 29 bits */ diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h index 74f7943cff6f..a0b348068cae 100644 --- a/arch/sh/include/asm/atomic-irq.h +++ b/arch/sh/include/asm/atomic-irq.h @@ -11,7 +11,7 @@ static inline void atomic_add(int i, atomic_t *v) unsigned long flags; local_irq_save(flags); - *(long *)v += i; + v->counter += i; local_irq_restore(flags); } @@ -20,7 +20,7 @@ static inline void atomic_sub(int i, atomic_t *v) unsigned long flags; local_irq_save(flags); - *(long *)v -= i; + v->counter -= i; local_irq_restore(flags); } @@ -29,9 +29,9 @@ static inline int atomic_add_return(int i, atomic_t *v) unsigned long temp, flags; local_irq_save(flags); - temp = *(long *)v; + temp = v->counter; temp += i; - *(long *)v = temp; + v->counter = temp; local_irq_restore(flags); return temp; @@ -42,9 +42,9 @@ static inline int atomic_sub_return(int i, atomic_t *v) unsigned long temp, flags; local_irq_save(flags); - temp = *(long *)v; + temp = v->counter; temp -= i; - *(long *)v = temp; + v->counter = temp; local_irq_restore(flags); return temp; @@ -55,7 +55,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) unsigned long flags; local_irq_save(flags); - *(long *)v &= ~mask; + v->counter &= ~mask; local_irq_restore(flags); } @@ -64,7 +64,7 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) unsigned long flags; local_irq_save(flags); - *(long *)v |= mask; + v->counter |= mask; local_irq_restore(flags); } diff --git a/arch/sh/include/asm/bitops-llsc.h b/arch/sh/include/asm/bitops-llsc.h index 1d2fc0b010ad..d8328be06191 100644 --- a/arch/sh/include/asm/bitops-llsc.h +++ b/arch/sh/include/asm/bitops-llsc.h @@ -1,7 +1,7 @@ #ifndef __ASM_SH_BITOPS_LLSC_H #define __ASM_SH_BITOPS_LLSC_H -static inline void set_bit(int nr, volatile void * addr) +static inline void set_bit(int nr, volatile void *addr) { int mask; volatile unsigned int *a = addr; @@ -13,16 +13,16 @@ static inline void set_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" "movli.l @%1, %0 ! set_bit \n\t" - "or %3, %0 \n\t" + "or %2, %0 \n\t" "movco.l %0, @%1 \n\t" "bf 1b \n\t" - : "=&z" (tmp), "=r" (a) - : "1" (a), "r" (mask) + : "=&z" (tmp) + : "r" (a), "r" (mask) : "t", "memory" ); } -static inline void clear_bit(int nr, volatile void * addr) +static inline void clear_bit(int nr, volatile void *addr) { int mask; volatile unsigned int *a = addr; @@ -34,16 +34,16 @@ static inline void clear_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" "movli.l @%1, %0 ! clear_bit \n\t" - "and %3, %0 \n\t" + "and %2, %0 \n\t" "movco.l %0, @%1 \n\t" "bf 1b \n\t" - : "=&z" (tmp), "=r" (a) - : "1" (a), "r" (~mask) + : "=&z" (tmp) + : "r" (a), "r" (~mask) : "t", "memory" ); } -static inline void change_bit(int nr, volatile void * addr) +static inline void change_bit(int nr, volatile void *addr) { int mask; volatile unsigned int *a = addr; @@ -55,16 +55,16 @@ static inline void change_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" "movli.l @%1, %0 ! change_bit \n\t" - "xor %3, %0 \n\t" + "xor %2, %0 \n\t" "movco.l %0, @%1 \n\t" "bf 1b \n\t" - : "=&z" (tmp), "=r" (a) - : "1" (a), "r" (mask) + : "=&z" (tmp) + : "r" (a), "r" (mask) : "t", "memory" ); } -static inline int test_and_set_bit(int nr, volatile void * addr) +static inline int test_and_set_bit(int nr, volatile void *addr) { int mask, retval; volatile unsigned int *a = addr; @@ -75,21 +75,21 @@ static inline int test_and_set_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! test_and_set_bit \n\t" - "mov %0, %2 \n\t" - "or %4, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! test_and_set_bit \n\t" + "mov %0, %1 \n\t" + "or %3, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" - "and %4, %2 \n\t" - : "=&z" (tmp), "=r" (a), "=&r" (retval) - : "1" (a), "r" (mask) + "and %3, %1 \n\t" + : "=&z" (tmp), "=&r" (retval) + : "r" (a), "r" (mask) : "t", "memory" ); return retval != 0; } -static inline int test_and_clear_bit(int nr, volatile void * addr) +static inline int test_and_clear_bit(int nr, volatile void *addr) { int mask, retval; volatile unsigned int *a = addr; @@ -100,22 +100,22 @@ static inline int test_and_clear_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! test_and_clear_bit \n\t" - "mov %0, %2 \n\t" - "and %5, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! test_and_clear_bit \n\t" + "mov %0, %1 \n\t" + "and %4, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" - "and %4, %2 \n\t" + "and %3, %1 \n\t" "synco \n\t" - : "=&z" (tmp), "=r" (a), "=&r" (retval) - : "1" (a), "r" (mask), "r" (~mask) + : "=&z" (tmp), "=&r" (retval) + : "r" (a), "r" (mask), "r" (~mask) : "t", "memory" ); return retval != 0; } -static inline int test_and_change_bit(int nr, volatile void * addr) +static inline int test_and_change_bit(int nr, volatile void *addr) { int mask, retval; volatile unsigned int *a = addr; @@ -126,15 +126,15 @@ static inline int test_and_change_bit(int nr, volatile void * addr) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! test_and_change_bit \n\t" - "mov %0, %2 \n\t" - "xor %4, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! test_and_change_bit \n\t" + "mov %0, %1 \n\t" + "xor %3, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" - "and %4, %2 \n\t" + "and %3, %1 \n\t" "synco \n\t" - : "=&z" (tmp), "=r" (a), "=&r" (retval) - : "1" (a), "r" (mask) + : "=&z" (tmp), "=&r" (retval) + : "r" (a), "r" (mask) : "t", "memory" ); diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h index f9c88583d90a..2f6c9627bc1f 100644 --- a/arch/sh/include/asm/clock.h +++ b/arch/sh/include/asm/clock.h @@ -15,6 +15,7 @@ struct clk_ops { void (*disable)(struct clk *clk); void (*recalc)(struct clk *clk); int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id); + int (*set_parent)(struct clk *clk, struct clk *parent); long (*round_rate)(struct clk *clk, unsigned long rate); }; diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h index aee3bf286581..0fac3da536ca 100644 --- a/arch/sh/include/asm/cmpxchg-llsc.h +++ b/arch/sh/include/asm/cmpxchg-llsc.h @@ -8,14 +8,14 @@ static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! xchg_u32 \n\t" - "mov %0, %2 \n\t" - "mov %4, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! xchg_u32 \n\t" + "mov %0, %1 \n\t" + "mov %3, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" "synco \n\t" - : "=&z"(tmp), "=r" (m), "=&r" (retval) - : "1" (m), "r" (val) + : "=&z"(tmp), "=&r" (retval) + : "r" (m), "r" (val) : "t", "memory" ); @@ -29,14 +29,14 @@ static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! xchg_u8 \n\t" - "mov %0, %2 \n\t" - "mov %4, %0 \n\t" - "movco.l %0, @%1 \n\t" + "movli.l @%2, %0 ! xchg_u8 \n\t" + "mov %0, %1 \n\t" + "mov %3, %0 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" "synco \n\t" - : "=&z"(tmp), "=r" (m), "=&r" (retval) - : "1" (m), "r" (val & 0xff) + : "=&z"(tmp), "=&r" (retval) + : "r" (m), "r" (val & 0xff) : "t", "memory" ); @@ -51,17 +51,17 @@ __cmpxchg_u32(volatile int *m, unsigned long old, unsigned long new) __asm__ __volatile__ ( "1: \n\t" - "movli.l @%1, %0 ! __cmpxchg_u32 \n\t" - "mov %0, %2 \n\t" - "cmp/eq %2, %4 \n\t" + "movli.l @%2, %0 ! __cmpxchg_u32 \n\t" + "mov %0, %1 \n\t" + "cmp/eq %1, %3 \n\t" "bf 2f \n\t" - "mov %5, %0 \n\t" + "mov %3, %0 \n\t" "2: \n\t" - "movco.l %0, @%1 \n\t" + "movco.l %0, @%2 \n\t" "bf 1b \n\t" "synco \n\t" - : "=&z" (tmp), "=r" (m), "=&r" (retval) - : "1" (m), "r" (old), "r" (new) + : "=&z" (tmp), "=&r" (retval) + : "r" (m), "r" (old), "r" (new) : "t", "memory" ); diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h index 86308aa39731..694abe490edb 100644 --- a/arch/sh/include/asm/cpu-features.h +++ b/arch/sh/include/asm/cpu-features.h @@ -21,5 +21,6 @@ #define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ #define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ #define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ +#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */ #endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h new file mode 100644 index 000000000000..0c8f8e14622a --- /dev/null +++ b/arch/sh/include/asm/dma-sh.h @@ -0,0 +1,118 @@ +/* + * arch/sh/include/asm/dma-sh.h + * + * Copyright (C) 2000 Takashi YOSHII + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __DMA_SH_H +#define __DMA_SH_H + +#include <asm/dma.h> +#include <cpu/dma.h> + +/* DMAOR contorl: The DMAOR access size is different by CPU.*/ +#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) +#define dmaor_read_reg(n) \ + (n ? ctrl_inw(SH_DMAC_BASE1 + DMAOR) \ + : ctrl_inw(SH_DMAC_BASE0 + DMAOR)) +#define dmaor_write_reg(n, data) \ + (n ? ctrl_outw(data, SH_DMAC_BASE1 + DMAOR) \ + : ctrl_outw(data, SH_DMAC_BASE0 + DMAOR)) +#else /* Other CPU */ +#define dmaor_read_reg(n) ctrl_inw(SH_DMAC_BASE0 + DMAOR) +#define dmaor_write_reg(n, data) ctrl_outw(data, SH_DMAC_BASE0 + DMAOR) +#endif + +static int dmte_irq_map[] __maybe_unused = { +#if (MAX_DMA_CHANNELS >= 4) + DMTE0_IRQ, + DMTE0_IRQ + 1, + DMTE0_IRQ + 2, + DMTE0_IRQ + 3, +#endif +#if (MAX_DMA_CHANNELS >= 6) + DMTE4_IRQ, + DMTE4_IRQ + 1, +#endif +#if (MAX_DMA_CHANNELS >= 8) + DMTE6_IRQ, + DMTE6_IRQ + 1, +#endif +#if (MAX_DMA_CHANNELS >= 12) + DMTE8_IRQ, + DMTE9_IRQ, + DMTE10_IRQ, + DMTE11_IRQ, +#endif +}; + +/* Definitions for the SuperH DMAC */ +#define REQ_L 0x00000000 +#define REQ_E 0x00080000 +#define RACK_H 0x00000000 +#define RACK_L 0x00040000 +#define ACK_R 0x00000000 +#define ACK_W 0x00020000 +#define ACK_H 0x00000000 +#define ACK_L 0x00010000 +#define DM_INC 0x00004000 +#define DM_DEC 0x00008000 +#define SM_INC 0x00001000 +#define SM_DEC 0x00002000 +#define RS_IN 0x00000200 +#define RS_OUT 0x00000300 +#define TS_BLK 0x00000040 +#define TM_BUR 0x00000020 +#define CHCR_DE 0x00000001 +#define CHCR_TE 0x00000002 +#define CHCR_IE 0x00000004 + +/* DMAOR definitions */ +#define DMAOR_AE 0x00000004 +#define DMAOR_NMIF 0x00000002 +#define DMAOR_DME 0x00000001 + +/* + * Define the default configuration for dual address memory-memory transfer. + * The 0x400 value represents auto-request, external->external. + */ +#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32) + +/* DMA base address */ +static u32 dma_base_addr[] __maybe_unused = { +#if (MAX_DMA_CHANNELS >= 4) + SH_DMAC_BASE0 + 0x00, /* channel 0 */ + SH_DMAC_BASE0 + 0x10, + SH_DMAC_BASE0 + 0x20, + SH_DMAC_BASE0 + 0x30, +#endif +#if (MAX_DMA_CHANNELS >= 6) + SH_DMAC_BASE0 + 0x50, + SH_DMAC_BASE0 + 0x60, +#endif +#if (MAX_DMA_CHANNELS >= 8) + SH_DMAC_BASE1 + 0x00, + SH_DMAC_BASE1 + 0x10, +#endif +#if (MAX_DMA_CHANNELS >= 12) + SH_DMAC_BASE1 + 0x20, + SH_DMAC_BASE1 + 0x30, + SH_DMAC_BASE1 + 0x50, + SH_DMAC_BASE1 + 0x60, /* channel 11 */ +#endif +}; + +/* DMA register */ +#define SAR 0x00 +#define DAR 0x04 +#define TCR 0x08 +#define CHCR 0x0C +#define DMAOR 0x40 + +#endif /* __DMA_SH_H */ diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h index beca7128e2ab..6bd178473878 100644 --- a/arch/sh/include/asm/dma.h +++ b/arch/sh/include/asm/dma.h @@ -25,9 +25,9 @@ #define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) #ifdef CONFIG_NR_DMA_CHANNELS -# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) +# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) #else -# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) +# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) #endif /* diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S index 2dab0b8d9454..3a4752a65722 100644 --- a/arch/sh/include/asm/entry-macros.S +++ b/arch/sh/include/asm/entry-macros.S @@ -31,3 +31,8 @@ #endif .endm +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4) +# define PREF(x) pref @x +#else +# define PREF(x) nop +#endif diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h index 90673658eb14..61f93da2c62e 100644 --- a/arch/sh/include/asm/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -19,8 +19,42 @@ #include <cpu/gpio.h> #endif +#define ARCH_NR_GPIOS 512 +#include <asm-generic/gpio.h> + +#ifdef CONFIG_GPIOLIB + +static inline int gpio_get_value(unsigned gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + WARN_ON(1); + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + WARN_ON(1); + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + typedef unsigned short pinmux_enum_t; -typedef unsigned char pinmux_flag_t; +typedef unsigned short pinmux_flag_t; #define PINMUX_TYPE_NONE 0 #define PINMUX_TYPE_FUNCTION 1 @@ -34,6 +68,11 @@ typedef unsigned char pinmux_flag_t; #define PINMUX_FLAG_WANT_PULLUP (1 << 3) #define PINMUX_FLAG_WANT_PULLDOWN (1 << 4) +#define PINMUX_FLAG_DBIT_SHIFT 5 +#define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT) +#define PINMUX_FLAG_DREG_SHIFT 10 +#define PINMUX_FLAG_DREG (0x3f << PINMUX_FLAG_DREG_SHIFT) + struct pinmux_gpio { pinmux_enum_t enum_id; pinmux_flag_t flags; @@ -54,7 +93,7 @@ struct pinmux_cfg_reg { .enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \ struct pinmux_data_reg { - unsigned long reg, reg_width; + unsigned long reg, reg_width, reg_shadow; pinmux_enum_t *enum_ids; }; @@ -89,34 +128,9 @@ struct pinmux_info { unsigned int gpio_data_size; unsigned long *gpio_in_use; + struct gpio_chip chip; }; int register_pinmux(struct pinmux_info *pip); -int __gpio_request(unsigned gpio); -static inline int gpio_request(unsigned gpio, const char *label) -{ - return __gpio_request(gpio); -} -void gpio_free(unsigned gpio); -int gpio_direction_input(unsigned gpio); -int gpio_direction_output(unsigned gpio, int value); -int gpio_get_value(unsigned gpio); -void gpio_set_value(unsigned gpio, int value); - -/* IRQ modes are unspported */ -static inline int gpio_to_irq(unsigned gpio) -{ - WARN_ON(1); - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - WARN_ON(1); - return -EINVAL; -} - -#include <asm-generic/gpio.h> - #endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h index 8c1353baf00f..52b4b6238277 100644 --- a/arch/sh/include/asm/hd64461.h +++ b/arch/sh/include/asm/hd64461.h @@ -242,7 +242,6 @@ #include <asm/io_generic.h> /* arch/sh/cchips/hd6446x/hd64461/setup.c */ -int hd64461_irq_demux(int irq); void hd64461_register_irq_demux(int irq, int (*demux) (int irq, void *dev), void *dev); void hd64461_unregister_irq_demux(int irq); diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 61f6dae40534..0454f8d68059 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -238,7 +238,7 @@ extern void onchip_unmap(unsigned long vaddr); static inline void __iomem * __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) { -#ifdef CONFIG_SUPERH32 +#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) unsigned long last_addr = offset + size - 1; #endif void __iomem *ret; @@ -247,7 +247,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) if (ret) return ret; -#ifdef CONFIG_SUPERH32 +#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) /* * For P1 and P2 space this is trivial, as everything is already * mapped. Uncached access for P1 addresses are done through P2. diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h index 6078d8e551d4..613644a758e8 100644 --- a/arch/sh/include/asm/kprobes.h +++ b/arch/sh/include/asm/kprobes.h @@ -16,7 +16,7 @@ typedef u16 kprobe_opcode_t; ? (MAX_STACK_SIZE) \ : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) -#define regs_return_value(regs) ((regs)->regs[0]) +#define regs_return_value(_regs) ((_regs)->regs[0]) #define flush_insn_slot(p) do { } while (0) #define kretprobe_blacklist_size 0 diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h index 5d9157bd474d..2a9c55f1a83f 100644 --- a/arch/sh/include/asm/mmu_context.h +++ b/arch/sh/include/asm/mmu_context.h @@ -19,13 +19,18 @@ * (a) TLB cache version (or round, cycle whatever expression you like) * (b) ASID (Address Space IDentifier) */ +#ifdef CONFIG_CPU_HAS_PTEAEX +#define MMU_CONTEXT_ASID_MASK 0x0000ffff +#else #define MMU_CONTEXT_ASID_MASK 0x000000ff -#define MMU_CONTEXT_VERSION_MASK 0xffffff00 -#define MMU_CONTEXT_FIRST_VERSION 0x00000100 -#define NO_CONTEXT 0UL +#endif -/* ASID is 8-bit value, so it can't be 0x100 */ -#define MMU_NO_ASID 0x100 +#define MMU_CONTEXT_VERSION_MASK (~0UL & ~MMU_CONTEXT_ASID_MASK) +#define MMU_CONTEXT_FIRST_VERSION (MMU_CONTEXT_ASID_MASK + 1) + +/* Impossible ASID value, to differentiate from NO_CONTEXT. */ +#define MMU_NO_ASID MMU_CONTEXT_FIRST_VERSION +#define NO_CONTEXT 0UL #define asid_cache(cpu) (cpu_data[cpu].asid_cache) diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h index f4f9aebd68b7..8ef800c549ab 100644 --- a/arch/sh/include/asm/mmu_context_32.h +++ b/arch/sh/include/asm/mmu_context_32.h @@ -10,6 +10,17 @@ static inline void destroy_context(struct mm_struct *mm) /* Do nothing */ } +#ifdef CONFIG_CPU_HAS_PTEAEX +static inline void set_asid(unsigned long asid) +{ + __raw_writel(asid, MMU_PTEAEX); +} + +static inline unsigned long get_asid(void) +{ + return __raw_readl(MMU_PTEAEX) & MMU_CONTEXT_ASID_MASK; +} +#else static inline void set_asid(unsigned long asid) { unsigned long __dummy; @@ -33,6 +44,7 @@ static inline unsigned long get_asid(void) asid &= MMU_CONTEXT_ASID_MASK; return asid; } +#endif /* CONFIG_CPU_HAS_PTEAEX */ /* MMU_TTB is used for optimizing the fault handling. */ static inline void set_TTB(pgd_t *pgd) diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index 5871d78e47e5..9c6d21ec0240 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -129,7 +129,12 @@ typedef struct page *pgtable_t; * is not visible (it is part of the PMB mapping) and so needs to be * added or subtracted as required. */ -#ifdef CONFIG_32BIT +#if defined(CONFIG_PMB_FIXED) +/* phys = virt - PAGE_OFFSET - (__MEMORY_START & 0xe0000000) */ +#define PMB_OFFSET (PAGE_OFFSET - PXSEG(__MEMORY_START)) +#define __pa(x) ((unsigned long)(x) - PMB_OFFSET) +#define __va(x) ((void *)((unsigned long)(x) + PMB_OFFSET)) +#elif defined(CONFIG_32BIT) #define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START) #define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START)) #else diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h index 1ef4b24d7619..1fd58b421438 100644 --- a/arch/sh/include/asm/processor.h +++ b/arch/sh/include/asm/processor.h @@ -31,7 +31,7 @@ enum cpu_type { CPU_SH7760, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ - CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786, CPU_SH7723, CPU_SHX3, /* SH4AL-DSP types */ diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h index d79063c5eb9c..efdd78a53b11 100644 --- a/arch/sh/include/asm/processor_32.h +++ b/arch/sh/include/asm/processor_32.h @@ -108,12 +108,12 @@ extern int ubc_usercnt; /* * Do necessary setup to start up a newly executed thread. */ -#define start_thread(regs, new_pc, new_sp) \ +#define start_thread(_regs, new_pc, new_sp) \ set_fs(USER_DS); \ - regs->pr = 0; \ - regs->sr = SR_FD; /* User mode. */ \ - regs->pc = new_pc; \ - regs->regs[15] = new_sp + _regs->pr = 0; \ + _regs->sr = SR_FD; /* User mode. */ \ + _regs->pc = new_pc; \ + _regs->regs[15] = new_sp /* Forward declaration, a strange C thing */ struct task_struct; @@ -189,10 +189,9 @@ extern unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) -#define user_stack_pointer(regs) ((regs)->regs[15]) +#define user_stack_pointer(_regs) ((_regs)->regs[15]) -#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_CPU_SH4) +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4) #define PREFETCH_STRIDE L1_CACHE_BYTES #define ARCH_HAS_PREFETCH #define ARCH_HAS_PREFETCHW diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h index 803177fcf086..5727d31b0ccf 100644 --- a/arch/sh/include/asm/processor_64.h +++ b/arch/sh/include/asm/processor_64.h @@ -145,13 +145,13 @@ struct thread_struct { */ #define SR_USER (SR_MMU | SR_FD) -#define start_thread(regs, new_pc, new_sp) \ +#define start_thread(_regs, new_pc, new_sp) \ set_fs(USER_DS); \ - regs->sr = SR_USER; /* User mode. */ \ - regs->pc = new_pc - 4; /* Compensate syscall exit */ \ - regs->pc |= 1; /* Set SHmedia ! */ \ - regs->regs[18] = 0; \ - regs->regs[15] = new_sp + _regs->sr = SR_USER; /* User mode. */ \ + _regs->pc = new_pc - 4; /* Compensate syscall exit */ \ + _regs->pc |= 1; /* Set SHmedia ! */ \ + _regs->regs[18] = 0; \ + _regs->regs[15] = new_sp /* Forward declaration, a strange C thing */ struct task_struct; @@ -226,7 +226,7 @@ extern unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) ((tsk)->thread.pc) #define KSTK_ESP(tsk) ((tsk)->thread.sp) -#define user_stack_pointer(regs) ((regs)->regs[15]) +#define user_stack_pointer(_regs) ((_regs)->regs[15]) #endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_PROCESSOR_64_H */ diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index 12912ab80c15..81c6568fdb3e 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -122,14 +122,12 @@ extern void user_disable_single_step(struct task_struct *); #ifdef CONFIG_SH_DSP #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1) + - sizeof(struct pt_dspregs)) - 1) #define task_pt_dspregs(task) \ - ((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(unsigned long)) - 1) + ((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE) - 1) #else #define task_pt_regs(task) \ - ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ - - sizeof(unsigned long)) - 1) + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1) #endif static inline unsigned long profile_pc(struct pt_regs *regs) diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index 8f8f4ad400df..01a4076a3719 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -3,6 +3,7 @@ #include <asm-generic/sections.h> +extern void __nosave_begin, __nosave_end; extern long __machvec_start, __machvec_end; extern char __uncached_start, __uncached_end; extern char _ebss[]; diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h new file mode 100644 index 000000000000..b1b995370e79 --- /dev/null +++ b/arch/sh/include/asm/suspend.h @@ -0,0 +1,22 @@ +#ifndef _ASM_SH_SUSPEND_H +#define _ASM_SH_SUSPEND_H + +#ifndef __ASSEMBLY__ +static inline int arch_prepare_suspend(void) { return 0; } + +#include <asm/ptrace.h> + +struct swsusp_arch_regs { + struct pt_regs user_regs; + unsigned long bank1_regs[8]; +}; +#endif + +/* flags passed to assembly suspend code */ +#define SUSP_SH_SLEEP (1 << 0) /* Regular sleep mode */ +#define SUSP_SH_STANDBY (1 << 1) /* SH-Mobile Software standby mode */ +#define SUSP_SH_RSTANDBY (1 << 2) /* SH-Mobile R-standby mode */ +#define SUSP_SH_USTANDBY (1 << 3) /* SH-Mobile U-standby mode */ +#define SUSP_SH_SF (1 << 4) /* Enable self-refresh */ + +#endif /* _ASM_SH_SUSPEND_H */ diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h index a7ca3a195bb5..4c3b66e30af2 100644 --- a/arch/sh/include/asm/timer.h +++ b/arch/sh/include/asm/timer.h @@ -9,7 +9,6 @@ struct sys_timer_ops { int (*init)(void); int (*start)(void); int (*stop)(void); - cycle_t (*read)(void); #ifndef CONFIG_GENERIC_TIME unsigned long (*get_offset)(void); #endif @@ -39,6 +38,7 @@ struct sys_timer *get_sys_timer(void); /* arch/sh/kernel/time.c */ void handle_timer_tick(void); -extern unsigned long sh_hpt_frequency; + +extern struct clocksource clocksource_sh; #endif /* __ASM_SH_TIMER_H */ diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 88ff1ae8a6b8..9c16f737074a 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -6,22 +6,106 @@ #endif #ifndef __ASSEMBLY__ +#include <linux/pagemap.h> + +#ifdef CONFIG_MMU +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> + +/* + * TLB handling. This allows us to remove pages from the page + * tables, and efficiently handle the TLB issues. + */ +struct mmu_gather { + struct mm_struct *mm; + unsigned int fullmm; + unsigned long start, end; +}; -#define tlb_start_vma(tlb, vma) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end) +DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); -#define tlb_end_vma(tlb, vma) \ - flush_tlb_range(vma, vma->vm_start, vma->vm_end) +static inline void init_tlb_gather(struct mmu_gather *tlb) +{ + tlb->start = TASK_SIZE; + tlb->end = 0; -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) + if (tlb->fullmm) { + tlb->start = 0; + tlb->end = TASK_SIZE; + } +} + +static inline struct mmu_gather * +tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +{ + struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); + + tlb->mm = mm; + tlb->fullmm = full_mm_flush; + + init_tlb_gather(tlb); + + return tlb; +} + +static inline void +tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +{ + if (tlb->fullmm) + flush_tlb_mm(tlb->mm); + + /* keep the page table cache within bounds */ + check_pgt_cache(); + + put_cpu_var(mmu_gathers); +} + +static inline void +tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long address) +{ + if (tlb->start > address) + tlb->start = address; + if (tlb->end < address + PAGE_SIZE) + tlb->end = address + PAGE_SIZE; +} /* - * Flush whole TLBs for MM + * In the case of tlb vma handling, we can optimise these away in the + * case where we're doing a full MM flush. When we're doing a munmap, + * the vmas are adjusted to only cover the region to be torn down. */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) +static inline void +tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) +{ + if (!tlb->fullmm) + flush_cache_range(vma, vma->vm_start, vma->vm_end); +} + +static inline void +tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) +{ + if (!tlb->fullmm && tlb->end) { + flush_tlb_range(vma, tlb->start, tlb->end); + init_tlb_gather(tlb); + } +} + +#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) +#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep) +#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp) +#define pud_free_tlb(tlb, pudp) pud_free((tlb)->mm, pudp) + +#define tlb_migrate_finish(mm) do { } while (0) + +#else /* CONFIG_MMU */ + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) +#define tlb_flush(tlb) do { } while (0) -#include <linux/pagemap.h> #include <asm-generic/tlb.h> +#endif /* CONFIG_MMU */ #endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_TLB_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h index 6813c3220a1d..0ea15f3f2363 100644 --- a/arch/sh/include/cpu-sh3/cpu/dma.h +++ b/arch/sh/include/cpu-sh3/cpu/dma.h @@ -1,22 +1,17 @@ #ifndef __ASM_CPU_SH3_DMA_H #define __ASM_CPU_SH3_DMA_H - #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) -#define SH_DMAC_BASE 0xa4010020 -#else -#define SH_DMAC_BASE 0xa4000020 + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7712) +#define SH_DMAC_BASE0 0xa4010020 +#else /* SH7705/06/07/09 */ +#define SH_DMAC_BASE0 0xa4000020 #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) #define DMTE0_IRQ 48 -#define DMTE1_IRQ 49 -#define DMTE2_IRQ 50 -#define DMTE3_IRQ 51 #define DMTE4_IRQ 76 -#define DMTE5_IRQ 77 -#endif /* Definitions for the SuperH DMAC */ #define TM_BURST 0x00000020 diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h new file mode 100644 index 000000000000..0ed5178fed69 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h @@ -0,0 +1,94 @@ +#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H +#define __ASM_SH_CPU_SH4_DMA_SH7780_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7730) +#define DMTE0_IRQ 48 +#define DMTE4_IRQ 76 +#define DMAE0_IRQ 78 /* DMA Error IRQ*/ +#define SH_DMAC_BASE0 0xFE008020 +#define SH_DMARS_BASE 0xFE009000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7764) +#define DMTE0_IRQ 34 +#define DMTE4_IRQ 44 +#define DMAE0_IRQ 38 +#define SH_DMAC_BASE0 0xFF608020 +#define SH_DMARS_BASE 0xFF609000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +#define DMTE0_IRQ 48 /* DMAC0A*/ +#define DMTE4_IRQ 40 /* DMAC0B */ +#define DMTE6_IRQ 42 +#define DMTE8_IRQ 76 /* DMAC1A */ +#define DMTE9_IRQ 77 +#define DMTE10_IRQ 72 /* DMAC1B */ +#define DMTE11_IRQ 73 +#define DMAE0_IRQ 78 /* DMA Error IRQ*/ +#define DMAE1_IRQ 74 /* DMA Error IRQ*/ +#define SH_DMAC_BASE0 0xFE008020 +#define SH_DMAC_BASE1 0xFDC08020 +#define SH_DMARS_BASE 0xFDC09000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +#define DMTE0_IRQ 34 +#define DMTE4_IRQ 44 +#define DMTE6_IRQ 46 +#define DMTE8_IRQ 92 +#define DMTE9_IRQ 93 +#define DMTE10_IRQ 94 +#define DMTE11_IRQ 95 +#define DMAE0_IRQ 38 /* DMA Error IRQ */ +#define SH_DMAC_BASE0 0xFC808020 +#define SH_DMAC_BASE1 0xFC818020 +#define SH_DMARS_BASE 0xFC809000 +#else /* SH7785 */ +#define DMTE0_IRQ 33 +#define DMTE4_IRQ 37 +#define DMTE6_IRQ 52 +#define DMTE8_IRQ 54 +#define DMTE9_IRQ 55 +#define DMTE10_IRQ 56 +#define DMTE11_IRQ 57 +#define DMAE0_IRQ 39 /* DMA Error IRQ0 */ +#define DMAE1_IRQ 58 /* DMA Error IRQ1 */ +#define SH_DMAC_BASE0 0xFC808020 +#define SH_DMAC_BASE1 0xFCC08020 +#define SH_DMARS_BASE 0xFC809000 +#endif + +#define REQ_HE 0x000000C0 +#define REQ_H 0x00000080 +#define REQ_LE 0x00000040 +#define TM_BURST 0x0000020 +#define TS_8 0x00000000 +#define TS_16 0x00000008 +#define TS_32 0x00000010 +#define TS_16BLK 0x00000018 +#define TS_32BLK 0x00100000 + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_128BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_128BIT] = 4, + [XMIT_SZ_256BIT] = 5, +}; + +#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h deleted file mode 100644 index 71b426a6e482..000000000000 --- a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H -#define __ASM_SH_CPU_SH4_DMA_SH7780_H - -#define REQ_HE 0x000000C0 -#define REQ_H 0x00000080 -#define REQ_LE 0x00000040 -#define TM_BURST 0x0000020 -#define TS_8 0x00000000 -#define TS_16 0x00000008 -#define TS_32 0x00000010 -#define TS_16BLK 0x00000018 -#define TS_32BLK 0x00100000 - -/* - * The SuperH DMAC supports a number of transmit sizes, we list them here, - * with their respective values as they appear in the CHCR registers. - * - * Defaults to a 64-bit transfer size. - */ -enum { - XMIT_SZ_8BIT, - XMIT_SZ_16BIT, - XMIT_SZ_32BIT, - XMIT_SZ_128BIT, - XMIT_SZ_256BIT, -}; - -/* - * The DMA count is defined as the number of bytes to transfer. - */ -static unsigned int ts_shift[] __maybe_unused = { - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - [XMIT_SZ_128BIT] = 4, - [XMIT_SZ_256BIT] = 5, -}; - -#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h index 235b7cd1fc9a..bcb30246e85c 100644 --- a/arch/sh/include/cpu-sh4/cpu/dma.h +++ b/arch/sh/include/cpu-sh4/cpu/dma.h @@ -1,31 +1,29 @@ #ifndef __ASM_CPU_SH4_DMA_H #define __ASM_CPU_SH4_DMA_H -#define DMAOR_INIT ( 0x8000 | DMAOR_DME ) - /* SH7751/7760/7780 DMA IRQ sources */ -#define DMTE0_IRQ 34 -#define DMTE1_IRQ 35 -#define DMTE2_IRQ 36 -#define DMTE3_IRQ 37 -#define DMTE4_IRQ 44 -#define DMTE5_IRQ 45 -#define DMTE6_IRQ 46 -#define DMTE7_IRQ 47 -#define DMAE_IRQ 38 #ifdef CONFIG_CPU_SH4A -#define SH_DMAC_BASE 0xfc808020 +#define DMAOR_INIT (DMAOR_DME) #define CHCR_TS_MASK 0x18 #define CHCR_TS_SHIFT 3 -#include <cpu/dma-sh7780.h> -#else -#define SH_DMAC_BASE 0xffa00000 +#include <cpu/dma-sh4a.h> +#else /* CONFIG_CPU_SH4A */ +/* + * SH7750/SH7751/SH7760 + */ +#define DMTE0_IRQ 34 +#define DMTE4_IRQ 44 +#define DMTE6_IRQ 46 +#define DMAE0_IRQ 38 +#define DMAOR_INIT (0x8000|DMAOR_DME) +#define SH_DMAC_BASE0 0xffa00000 +#define SH_DMAC_BASE1 0xffa00070 /* Definitions for the SuperH DMAC */ -#define TM_BURST 0x0000080 +#define TM_BURST 0x00000080 #define TS_8 0x00000010 #define TS_16 0x00000020 #define TS_32 0x00000030 diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h index c23af81c2e70..749d1c434337 100644 --- a/arch/sh/include/cpu-sh4/cpu/freq.h +++ b/arch/sh/include/cpu-sh4/cpu/freq.h @@ -29,6 +29,10 @@ #define FRQCR0 0xffc80000 #define FRQCR1 0xffc80004 #define FRQMR1 0xffc80014 +#elif defined(CONFIG_CPU_SUBTYPE_SH7786) +#define FRQCR0 0xffc40000 +#define FRQCR1 0xffc40004 +#define FRQMR1 0xffc40014 #elif defined(CONFIG_CPU_SUBTYPE_SHX3) #define FRQCR 0xffc00014 #else diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h index 9ea8eb27b18e..3ce7ef6c2978 100644 --- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h +++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h @@ -14,28 +14,35 @@ #define MMU_PTEL 0xFF000004 /* Page table entry register LOW */ #define MMU_TTB 0xFF000008 /* Translation table base register */ #define MMU_TEA 0xFF00000C /* TLB Exception Address */ -#define MMU_PTEA 0xFF000034 /* Page table entry assistance register */ +#define MMU_PTEA 0xFF000034 /* PTE assistance register */ +#define MMU_PTEAEX 0xFF00007C /* PTE ASID extension register */ #define MMUCR 0xFF000010 /* MMU Control Register */ -#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000 #define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 +#define MMU_UTLB_ADDRESS_ARRAY2 0xF6800000 #define MMU_PAGE_ASSOC_BIT 0x80 #define MMUCR_TI (1<<2) -#ifdef CONFIG_X2TLB -#define MMUCR_ME (1 << 7) -#else -#define MMUCR_ME (0) -#endif - #if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) #define MMUCR_SE (1 << 4) #else #define MMUCR_SE (0) #endif +#ifdef CONFIG_CPU_HAS_PTEAEX +#define MMUCR_AEX (1 << 6) +#else +#define MMUCR_AEX (0) +#endif + +#ifdef CONFIG_X2TLB +#define MMUCR_ME (1 << 7) +#else +#define MMUCR_ME (0) +#endif + #ifdef CONFIG_SH_STORE_QUEUES #define MMUCR_SQMD (1 << 9) #else @@ -43,17 +50,7 @@ #endif #define MMU_NTLB_ENTRIES 64 -#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE) - -#define MMU_ITLB_DATA_ARRAY 0xF3000000 -#define MMU_UTLB_DATA_ARRAY 0xF7000000 - -#define MMU_UTLB_ENTRIES 64 -#define MMU_U_ENTRY_SHIFT 8 -#define MMU_UTLB_VALID 0x100 -#define MMU_ITLB_ENTRIES 4 -#define MMU_I_ENTRY_SHIFT 8 -#define MMU_ITLB_VALID 0x100 +#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE|MMUCR_AEX) #define TRA 0xff000020 #define EXPEVT 0xff000024 diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h new file mode 100644 index 000000000000..48688adc0c84 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sh7786.h @@ -0,0 +1,192 @@ +/* + * SH7786 Pinmux + * + * Copyright (C) 2008, 2009 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Based on sh7785.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __CPU_SH7786_H__ +#define __CPU_SH7786_H__ + +enum { + /* PA */ + GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4, + GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0, + + /* PB */ + GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4, + GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0, + + /* PC */ + GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4, + GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0, + + /* PD */ + GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4, + GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0, + + /* PE */ + GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2, + GPIO_PE1, GPIO_PE0, + + /* PF */ + GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4, + GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0, + + /* PG */ + GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4, + GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0, + + /* PH */ + GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4, + GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0, + + /* PJ */ + GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4, + GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0, + + GPIO_FN_CDE, + GPIO_FN_ETH_MAGIC, + GPIO_FN_DISP, + GPIO_FN_ETH_LINK, + GPIO_FN_DR5, + GPIO_FN_ETH_TX_ER, + GPIO_FN_DR4, + GPIO_FN_ETH_TX_EN, + GPIO_FN_DR3, + GPIO_FN_ETH_TXD3, + GPIO_FN_DR2, + GPIO_FN_ETH_TXD2, + GPIO_FN_DR1, + GPIO_FN_ETH_TXD1, + GPIO_FN_DR0, + GPIO_FN_ETH_TXD0, + GPIO_FN_VSYNC, + GPIO_FN_HSPI_CLK, + GPIO_FN_ODDF, + GPIO_FN_HSPI_CS, + GPIO_FN_DG5, + GPIO_FN_ETH_MDIO, + GPIO_FN_DG4, + GPIO_FN_ETH_RX_CLK, + GPIO_FN_DG3, + GPIO_FN_ETH_MDC, + GPIO_FN_DG2, + GPIO_FN_ETH_COL, + GPIO_FN_DG1, + GPIO_FN_ETH_TX_CLK, + GPIO_FN_DG0, + GPIO_FN_ETH_CRS, + GPIO_FN_DCLKIN, + GPIO_FN_HSPI_RX, + GPIO_FN_HSYNC, + GPIO_FN_HSPI_TX, + GPIO_FN_DB5, + GPIO_FN_ETH_RXD3, + GPIO_FN_DB4, + GPIO_FN_ETH_RXD2, + GPIO_FN_DB3, + GPIO_FN_ETH_RXD1, + GPIO_FN_DB2, + GPIO_FN_ETH_RXD0, + GPIO_FN_DB1, + GPIO_FN_ETH_RX_DV, + GPIO_FN_DB0, + GPIO_FN_ETH_RX_ER, + GPIO_FN_DCLKOUT, + GPIO_FN_SCIF1_SLK, + GPIO_FN_SCIF1_RXD, + GPIO_FN_SCIF1_TXD, + GPIO_FN_DACK1, + GPIO_FN_BACK, + GPIO_FN_FALE, + GPIO_FN_DACK0, + GPIO_FN_FCLE, + GPIO_FN_DREQ1, + GPIO_FN_BREQ, + GPIO_FN_USB_OVC1, + GPIO_FN_DREQ0, + GPIO_FN_USB_OVC0, + GPIO_FN_USB_PENC1, + GPIO_FN_USB_PENC0, + GPIO_FN_HAC1_SDOUT, + GPIO_FN_SSI1_SDATA, + GPIO_FN_SDIF1CMD, + GPIO_FN_HAC1_SDIN, + GPIO_FN_SSI1_SCK, + GPIO_FN_SDIF1CD, + GPIO_FN_HAC1_SYNC, + GPIO_FN_SSI1_WS, + GPIO_FN_SDIF1WP, + GPIO_FN_HAC1_BITCLK, + GPIO_FN_SSI1_CLK, + GPIO_FN_SDIF1CLK, + GPIO_FN_HAC0_SDOUT, + GPIO_FN_SSI0_SDATA, + GPIO_FN_SDIF1D3, + GPIO_FN_HAC0_SDIN, + GPIO_FN_SSI0_SCK, + GPIO_FN_SDIF1D2, + GPIO_FN_HAC0_SYNC, + GPIO_FN_SSI0_WS, + GPIO_FN_SDIF1D1, + GPIO_FN_HAC0_BITCLK, + GPIO_FN_SSI0_CLK, + GPIO_FN_SDIF1D0, + GPIO_FN_SCIF3_SCK, + GPIO_FN_SSI2_SDATA, + GPIO_FN_SCIF3_RXD, + GPIO_FN_TCLK, + GPIO_FN_SSI2_SCK, + GPIO_FN_SCIF3_TXD, + GPIO_FN_HAC_RES, + GPIO_FN_SSI2_WS, + GPIO_FN_DACK3, + GPIO_FN_SDIF0CMD, + GPIO_FN_DACK2, + GPIO_FN_SDIF0CD, + GPIO_FN_DREQ3, + GPIO_FN_SDIF0WP, + GPIO_FN_SCIF0_CTS, + GPIO_FN_DREQ2, + GPIO_FN_SDIF0CLK, + GPIO_FN_SCIF0_RTS, + GPIO_FN_IRL7, + GPIO_FN_SDIF0D3, + GPIO_FN_SCIF0_SCK, + GPIO_FN_IRL6, + GPIO_FN_SDIF0D2, + GPIO_FN_SCIF0_RXD, + GPIO_FN_IRL5, + GPIO_FN_SDIF0D1, + GPIO_FN_SCIF0_TXD, + GPIO_FN_IRL4, + GPIO_FN_SDIF0D0, + GPIO_FN_SCIF5_SCK, + GPIO_FN_FRB, + GPIO_FN_SCIF5_RXD, + GPIO_FN_IOIS16, + GPIO_FN_SCIF5_TXD, + GPIO_FN_CE2B, + GPIO_FN_DRAK3, + GPIO_FN_CE2A, + GPIO_FN_SCIF4_SCK, + GPIO_FN_DRAK2, + GPIO_FN_SSI3_WS, + GPIO_FN_SCIF4_RXD, + GPIO_FN_DRAK1, + GPIO_FN_SSI3_SDATA, + GPIO_FN_FSTATUS, + GPIO_FN_SCIF4_TXD, + GPIO_FN_DRAK0, + GPIO_FN_SSI3_SCK, + GPIO_FN_FSE, +}; + +#endif /* __CPU_SH7786_H__ */ diff --git a/arch/sh/include/mach-common/mach/urquell.h b/arch/sh/include/mach-common/mach/urquell.h new file mode 100644 index 000000000000..14b3e1d01777 --- /dev/null +++ b/arch/sh/include/mach-common/mach/urquell.h @@ -0,0 +1,68 @@ +#ifndef __MACH_URQUELL_H +#define __MACH_URQUELL_H + +/* + * ------ 0x00000000 ------------------------------------ + * CS0 | (SW1,SW47) EEPROM, SRAM, NOR FLASH + * -----+ 0x04000000 ------------------------------------ + * CS1 | (SW47) SRAM, SRAM-LAN-PCMCIA, NOR FLASH + * -----+ 0x08000000 ------------------------------------ + * CS2 | DDR3 + * CS3 | + * -----+ 0x10000000 ------------------------------------ + * CS4 | PCIe + * -----+ 0x14000000 ------------------------------------ + * CS5 | (SW47) LRAM/URAM, SRAM-LAN-PCMCIA + * -----+ 0x18000000 ------------------------------------ + * CS6 | ATA, NAND FLASH + * -----+ 0x1c000000 ------------------------------------ + * CS7 | SH7786 register + * -----+------------------------------------------------ + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define CS1_BASE 0x05000000 +#define CS5_BASE 0x15000000 +#define FPGA_BASE CS1_BASE + +#define BOARDREG(ofs) (FPGA_BASE + ofs##_OFS) +#define UBOARDREG(ofs) (0xa0000000 + FPGA_BASE + ofs##_OFS) + +#define SRSTR_OFS 0x0000 /* System reset register */ +#define BDMR_OFS 0x0010 /* Board operating mode resister */ +#define IRL0SR_OFS 0x0020 /* IRL0 Status register */ +#define IRL0MSKR_OFS 0x0030 /* IRL0 Mask register */ +#define IRL1SR_OFS 0x0040 /* IRL1 Status register */ +#define IRL1MSKR_OFS 0x0050 /* IRL1 Mask register */ +#define IRL2SR_OFS 0x0060 /* IRL2 Status register */ +#define IRL2MSKR_OFS 0x0070 /* IRL2 Mask register */ +#define IRL3SR_OFS 0x0080 /* IRL3 Status register */ +#define IRL3MSKR_OFS 0x0090 /* IRL3 Mask register */ +#define SOFTINTR_OFS 0x0120 /* Softwear Interrupt register */ +#define SLEDR_OFS 0x0130 /* LED control resister */ +#define MAPSCIFSWR_OFS 0x0140 /* Map/SCIF Switch register */ +#define FPVERR_OFS 0x0150 /* FPGA Version register */ +#define FPDATER_OFS 0x0160 /* FPGA Date register */ +#define FPYEARR_OFS 0x0170 /* FPGA Year register */ +#define TCLKCR_OFS 0x0180 /* TCLK Control register */ +#define DIPSWMR_OFS 0x1000 /* DIPSW monitor register */ +#define FPODR_OFS 0x1010 /* Output port data register */ +#define ATACNR_OFS 0x1020 /* ATA-CN Control/status register */ +#define FPINDR_OFS 0x1030 /* Input port data register */ +#define MDSWMR_OFS 0x1040 /* MODE SW monitor register */ +#define DDR3BUPCR_OFS 0x1050 /* DDR3 Backup control register */ +#define SSICODECCR_OFS 0x1060 /* SSI-CODEC control register */ +#define PCIESLOTSR_OFS 0x1070 /* PCIexpress Slot status register */ +#define ETHERPORTSR_OFS 0x1080 /* EtherPhy Port status register */ +#define LATCHCR_OFS 0x3000 /* Latch control register */ +#define LATCUAR_OFS 0x3010 /* Latch upper address register */ +#define LATCLAR_OFS 0x3012 /* Latch lower address register */ +#define LATCLUDR_OFS 0x3024 /* Latch D31-16 register */ +#define LATCLLDR_OFS 0x3026 /* Latch D15-0 register */ + +#define CHARLED_OFS 0x2000 /* Character LED */ + +#endif /* __MACH_URQUELL_H */ + diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 2e1b86e16ab5..82a3a150c00d 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -30,5 +30,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_DUMP_CODE) += disassemble.o +obj-$(CONFIG_HIBERNATION) += swsusp.o EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c index 57cf0e0680f3..99aceb28ee24 100644 --- a/arch/sh/kernel/asm-offsets.c +++ b/arch/sh/kernel/asm-offsets.c @@ -12,8 +12,10 @@ #include <linux/types.h> #include <linux/mm.h> #include <linux/kbuild.h> +#include <linux/suspend.h> #include <asm/thread_info.h> +#include <asm/suspend.h> int main(void) { @@ -25,5 +27,11 @@ int main(void) DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block)); +#ifdef CONFIG_HIBERNATION + DEFINE(PBE_ADDRESS, offsetof(struct pbe, address)); + DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address)); + DEFINE(PBE_NEXT, offsetof(struct pbe, next)); + DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs)); +#endif return 0; } diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index f471d242774e..2600641a483f 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_CPU_SH5) = sh5/ # Special cases for family ancestry. obj-$(CONFIG_CPU_SH4A) += sh4a/ +obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/ # Common interfaces. diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 7b17137536d6..1dc896483b59 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -20,6 +20,8 @@ #include <linux/mutex.h> #include <linux/list.h> #include <linux/kref.h> +#include <linux/kobject.h> +#include <linux/sysdev.h> #include <linux/seq_file.h> #include <linux/err.h> #include <linux/platform_device.h> @@ -239,6 +241,35 @@ void clk_recalc_rate(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_recalc_rate); +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -EINVAL; + struct clk *old; + + if (!parent || !clk) + return ret; + + old = clk->parent; + if (likely(clk->ops && clk->ops->set_parent)) { + unsigned long flags; + spin_lock_irqsave(&clock_lock, flags); + ret = clk->ops->set_parent(clk, parent); + spin_unlock_irqrestore(&clock_lock, flags); + clk->parent = (ret ? old : parent); + } + + if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clk); + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL_GPL(clk_get_parent); + long clk_round_rate(struct clk *clk, unsigned long rate) { if (likely(clk->ops && clk->ops->round_rate)) { @@ -329,6 +360,70 @@ static int show_clocks(char *buf, char **start, off_t off, return p - buf; } +#ifdef CONFIG_PM +static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state) +{ + static pm_message_t prev_state; + struct clk *clkp; + + switch (state.event) { + case PM_EVENT_ON: + /* Resumeing from hibernation */ + if (prev_state.event == PM_EVENT_FREEZE) { + list_for_each_entry(clkp, &clock_list, node) + if (likely(clkp->ops)) { + unsigned long rate = clkp->rate; + + if (likely(clkp->ops->set_parent)) + clkp->ops->set_parent(clkp, + clkp->parent); + if (likely(clkp->ops->set_rate)) + clkp->ops->set_rate(clkp, + rate, NO_CHANGE); + else if (likely(clkp->ops->recalc)) + clkp->ops->recalc(clkp); + } + } + break; + case PM_EVENT_FREEZE: + break; + case PM_EVENT_SUSPEND: + break; + } + + prev_state = state; + return 0; +} + +static int clks_sysdev_resume(struct sys_device *dev) +{ + return clks_sysdev_suspend(dev, PMSG_ON); +} + +static struct sysdev_class clks_sysdev_class = { + .name = "clks", +}; + +static struct sysdev_driver clks_sysdev_driver = { + .suspend = clks_sysdev_suspend, + .resume = clks_sysdev_resume, +}; + +static struct sys_device clks_sysdev_dev = { + .cls = &clks_sysdev_class, +}; + +static int __init clk_sysdev_init(void) +{ + sysdev_class_register(&clks_sysdev_class); + sysdev_driver_register(&clks_sysdev_class, &clks_sysdev_driver); + sysdev_register(&clks_sysdev_dev); + + return 0; +} +subsys_initcall(clk_sysdev_init); +#endif + int __init clk_init(void) { int i, ret = 0; diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 56e5878e5516..0e32d8e448ca 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -2,6 +2,7 @@ * SH7619 Setup * * Copyright (C) 2006 Yoshinori Sato + * Copyright (C) 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -18,15 +19,10 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, WDT, EDMAC, CMT0, CMT1, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + SCIF0, SCIF1, SCIF2, HIF_HIFI, HIF_HIFBI, DMAC0, DMAC1, DMAC2, DMAC3, SIOF, - - /* interrupt groups */ - SCIF0, SCIF1, SCIF2, }; static struct intc_vect vectors[] __initdata = { @@ -36,24 +32,18 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83), INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85), INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87), - INTC_IRQ(SCIF0_ERI, 88), INTC_IRQ(SCIF0_RXI, 89), - INTC_IRQ(SCIF0_BRI, 90), INTC_IRQ(SCIF0_TXI, 91), - INTC_IRQ(SCIF1_ERI, 92), INTC_IRQ(SCIF1_RXI, 93), - INTC_IRQ(SCIF1_BRI, 94), INTC_IRQ(SCIF1_TXI, 95), - INTC_IRQ(SCIF2_ERI, 96), INTC_IRQ(SCIF2_RXI, 97), - INTC_IRQ(SCIF2_BRI, 98), INTC_IRQ(SCIF2_TXI, 99), + INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89), + INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91), + INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93), + INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95), + INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97), + INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99), INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101), INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105), INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107), INTC_IRQ(SIOF, 108), }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, @@ -64,7 +54,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL, NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { @@ -72,17 +62,17 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xf8400000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 88, 89, 91, 90}, + .irqs = { 88, 88, 88, 88 }, }, { .mapbase = 0xf8410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 92, 93, 95, 94}, + .irqs = { 92, 92, 92, 92 }, }, { .mapbase = 0xf8420000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 96, 97, 99, 98}, + .irqs = { 96, 96, 96, 96 }, }, { .flags = 0, } diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index e611d79fac4c..844293723cfc 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -1,7 +1,7 @@ /* * Renesas MX-G (R8A03022BG) Setup * - * Copyright (C) 2008 Paul Mundt + * Copyright (C) 2008, 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -20,23 +20,15 @@ enum { IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, - SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1, - SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, + SCIF0, SCIF1, - MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, - MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, - MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, - MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, - MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, + MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5 + MTU2_TGI3B, MTU2_TGI3C, /* interrupt groups */ - PINT, SCIF0, SCIF1, - MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5 + PINT, }; static struct intc_vect vectors[] __initdata = { @@ -59,47 +51,36 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99), INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101), - INTC_IRQ(SCIF0_RXI, 220), INTC_IRQ(SCIF0_TXI, 221), - INTC_IRQ(SCIF0_BRI, 222), INTC_IRQ(SCIF0_ERI, 223), - INTC_IRQ(SCIF1_RXI, 224), INTC_IRQ(SCIF1_TXI, 225), - INTC_IRQ(SCIF1_BRI, 226), INTC_IRQ(SCIF1_ERI, 227), + INTC_IRQ(SCIF0, 220), INTC_IRQ(SCIF0, 221), + INTC_IRQ(SCIF0, 222), INTC_IRQ(SCIF0, 223), + INTC_IRQ(SCIF1, 224), INTC_IRQ(SCIF1, 225), + INTC_IRQ(SCIF1, 226), INTC_IRQ(SCIF1, 227), - INTC_IRQ(MTU2_TGI0A, 228), INTC_IRQ(MTU2_TGI0B, 229), - INTC_IRQ(MTU2_TGI0C, 230), INTC_IRQ(MTU2_TGI0D, 231), - INTC_IRQ(MTU2_TCI0V, 232), INTC_IRQ(MTU2_TGI0E, 233), + INTC_IRQ(MTU2_GROUP1, 228), INTC_IRQ(MTU2_GROUP1, 229), + INTC_IRQ(MTU2_GROUP1, 230), INTC_IRQ(MTU2_GROUP1, 231), + INTC_IRQ(MTU2_GROUP1, 232), INTC_IRQ(MTU2_GROUP1, 233), - INTC_IRQ(MTU2_TGI0F, 234), INTC_IRQ(MTU2_TGI1A, 235), - INTC_IRQ(MTU2_TGI1B, 236), INTC_IRQ(MTU2_TCI1V, 237), - INTC_IRQ(MTU2_TCI1U, 238), INTC_IRQ(MTU2_TGI2A, 239), + INTC_IRQ(MTU2_GROUP2, 234), INTC_IRQ(MTU2_GROUP2, 235), + INTC_IRQ(MTU2_GROUP2, 236), INTC_IRQ(MTU2_GROUP2, 237), + INTC_IRQ(MTU2_GROUP2, 238), INTC_IRQ(MTU2_GROUP2, 239), - INTC_IRQ(MTU2_TGI2B, 240), INTC_IRQ(MTU2_TCI2V, 241), - INTC_IRQ(MTU2_TCI2U, 242), INTC_IRQ(MTU2_TGI3A, 243), + INTC_IRQ(MTU2_GROUP3, 240), INTC_IRQ(MTU2_GROUP3, 241), + INTC_IRQ(MTU2_GROUP3, 242), INTC_IRQ(MTU2_GROUP3, 243), INTC_IRQ(MTU2_TGI3B, 244), INTC_IRQ(MTU2_TGI3C, 245), - INTC_IRQ(MTU2_TGI3D, 246), INTC_IRQ(MTU2_TCI3V, 247), - INTC_IRQ(MTU2_TGI4A, 248), INTC_IRQ(MTU2_TGI4B, 249), - INTC_IRQ(MTU2_TGI4C, 250), INTC_IRQ(MTU2_TGI4D, 251), + INTC_IRQ(MTU2_GROUP4, 246), INTC_IRQ(MTU2_GROUP4, 247), + INTC_IRQ(MTU2_GROUP4, 248), INTC_IRQ(MTU2_GROUP4, 249), + INTC_IRQ(MTU2_GROUP4, 250), INTC_IRQ(MTU2_GROUP4, 251), - INTC_IRQ(MTU2_TCI4V, 252), INTC_IRQ(MTU2_TGI5U, 253), - INTC_IRQ(MTU2_TGI5V, 254), INTC_IRQ(MTU2_TGI5W, 255), + INTC_IRQ(MTU2_GROUP5, 252), INTC_IRQ(MTU2_GROUP5, 253), + INTC_IRQ(MTU2_GROUP5, 254), INTC_IRQ(MTU2_GROUP5, 255), }; static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), - INTC_GROUP(MTU2_GROUP1, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E), - INTC_GROUP(MTU2_GROUP2, MTU2_TGI0F, MTU2_TGI1A, MTU2_TGI1B, - MTU2_TCI1V, MTU2_TCI1U, MTU2_TGI2A), - INTC_GROUP(MTU2_GROUP3, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A), - INTC_GROUP(MTU2_GROUP4, MTU2_TGI3D, MTU2_TCI3V, MTU2_TGI4A, - MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), - INTC_GROUP(MTU2_GROUP5, MTU2_TCI4V, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), - INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -137,7 +118,7 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xff804000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 223, 220, 221, 222 }, + .irqs = { 220, 220, 220, 220 }, }, { .flags = 0, } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index 0631e421c022..00f42f9e3f5c 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -2,6 +2,7 @@ * SH7201 setup * * Copyright (C) 2008 Peter Griffin pgriffin@mpc-data.co.uk + * Copyright (C) 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -18,57 +19,32 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, + ADC_ADI, - MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, - MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, - MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, - MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, - MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, - RTC_ARM, RTC_PRD, RTC_CUP, - WDT, - IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI, - IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI, - IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI, + + MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU, + MTU23_ABCD, MTU24_ABCD, MTU25_UVW, MTU2_TCI3V, MTU2_TCI4V, + + RTC, WDT, + + IIC30, IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1, DMAC2_DMINT2, DMAC3_DMINT3, - SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, - SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, - SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, - SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI, - SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI, - SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI, - SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI, + SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, - RCAN0_ERS, RCAN0_OVR, - RCAN0_SLE, - RCAN0_RM0, RCAN0_RM1, - - RCAN1_ERS, RCAN1_OVR, - RCAN1_SLE, - RCAN1_RM0, RCAN1_RM1, + RCAN0, RCAN1, SSI0_SSII, SSI1_SSII, - TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0, - TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1, + TMR0, TMR1, /* interrupt groups */ - - IRQ, PINT, ADC, - MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU, - MTU23_ABCD, MTU24_ABCD, MTU25_UVW, - RTC, IIC30, IIC31, IIC32, - SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7, - RCAN0, RCAN1, TMR0, TMR1 - + PINT, }; static struct intc_vect vectors[] __initdata = { @@ -76,6 +52,7 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69), INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71), + INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81), INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), @@ -83,123 +60,92 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(ADC_ADI, 92), - INTC_IRQ(MTU2_TGI0A, 108), INTC_IRQ(MTU2_TGI0B, 109), - INTC_IRQ(MTU2_TGI0C, 110), INTC_IRQ(MTU2_TGI0D, 111), - INTC_IRQ(MTU2_TCI0V, 112), - INTC_IRQ(MTU2_TGI0E, 113), INTC_IRQ(MTU2_TGI0F, 114), + INTC_IRQ(MTU20_ABCD, 108), INTC_IRQ(MTU20_ABCD, 109), + INTC_IRQ(MTU20_ABCD, 110), INTC_IRQ(MTU20_ABCD, 111), + + INTC_IRQ(MTU20_VEF, 112), INTC_IRQ(MTU20_VEF, 113), + INTC_IRQ(MTU20_VEF, 114), + + INTC_IRQ(MTU21_AB, 116), INTC_IRQ(MTU21_AB, 117), + INTC_IRQ(MTU21_VU, 120), INTC_IRQ(MTU21_VU, 121), - INTC_IRQ(MTU2_TGI1A, 116), INTC_IRQ(MTU2_TGI1B, 117), - INTC_IRQ(MTU2_TCI1V, 120), INTC_IRQ(MTU2_TCI1U, 121), + INTC_IRQ(MTU22_AB, 124), INTC_IRQ(MTU22_AB, 125), + INTC_IRQ(MTU22_VU, 128), INTC_IRQ(MTU22_VU, 129), - INTC_IRQ(MTU2_TGI2A, 124), INTC_IRQ(MTU2_TGI2B, 125), - INTC_IRQ(MTU2_TCI2V, 128), INTC_IRQ(MTU2_TCI2U, 129), + INTC_IRQ(MTU23_ABCD, 132), INTC_IRQ(MTU23_ABCD, 133), + INTC_IRQ(MTU23_ABCD, 134), INTC_IRQ(MTU23_ABCD, 135), - INTC_IRQ(MTU2_TGI3A, 132), INTC_IRQ(MTU2_TGI3B, 133), - INTC_IRQ(MTU2_TGI3C, 134), INTC_IRQ(MTU2_TGI3D, 135), INTC_IRQ(MTU2_TCI3V, 136), - INTC_IRQ(MTU2_TGI4A, 140), INTC_IRQ(MTU2_TGI4B, 141), - INTC_IRQ(MTU2_TGI4C, 142), INTC_IRQ(MTU2_TGI4D, 143), + INTC_IRQ(MTU24_ABCD, 140), INTC_IRQ(MTU24_ABCD, 141), + INTC_IRQ(MTU24_ABCD, 142), INTC_IRQ(MTU24_ABCD, 143), + INTC_IRQ(MTU2_TCI4V, 144), - INTC_IRQ(MTU2_TGI5U, 148), INTC_IRQ(MTU2_TGI5V, 149), - INTC_IRQ(MTU2_TGI5W, 150), + INTC_IRQ(MTU25_UVW, 148), INTC_IRQ(MTU25_UVW, 149), + INTC_IRQ(MTU25_UVW, 150), + + INTC_IRQ(RTC, 152), INTC_IRQ(RTC, 153), + INTC_IRQ(RTC, 154), - INTC_IRQ(RTC_ARM, 152), INTC_IRQ(RTC_PRD, 153), - INTC_IRQ(RTC_CUP, 154), INTC_IRQ(WDT, 156), + INTC_IRQ(WDT, 156), - INTC_IRQ(IIC30_STPI, 157), INTC_IRQ(IIC30_NAKI, 158), - INTC_IRQ(IIC30_RXI, 159), INTC_IRQ(IIC30_TXI, 160), - INTC_IRQ(IIC30_TEI, 161), + INTC_IRQ(IIC30, 157), INTC_IRQ(IIC30, 158), + INTC_IRQ(IIC30, 159), INTC_IRQ(IIC30, 160), + INTC_IRQ(IIC30, 161), - INTC_IRQ(IIC31_STPI, 164), INTC_IRQ(IIC31_NAKI, 165), - INTC_IRQ(IIC31_RXI, 166), INTC_IRQ(IIC31_TXI, 167), - INTC_IRQ(IIC31_TEI, 168), + INTC_IRQ(IIC31, 164), INTC_IRQ(IIC31, 165), + INTC_IRQ(IIC31, 166), INTC_IRQ(IIC31, 167), + INTC_IRQ(IIC31, 168), - INTC_IRQ(IIC32_STPI, 170), INTC_IRQ(IIC32_NAKI, 171), - INTC_IRQ(IIC32_RXI, 172), INTC_IRQ(IIC32_TXI, 173), - INTC_IRQ(IIC32_TEI, 174), + INTC_IRQ(IIC32, 170), INTC_IRQ(IIC32, 171), + INTC_IRQ(IIC32, 172), INTC_IRQ(IIC32, 173), + INTC_IRQ(IIC32, 174), INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177), INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179), - INTC_IRQ(SCIF0_BRI, 180), INTC_IRQ(SCIF0_ERI, 181), - INTC_IRQ(SCIF0_RXI, 182), INTC_IRQ(SCIF0_TXI, 183), - INTC_IRQ(SCIF1_BRI, 184), INTC_IRQ(SCIF1_ERI, 185), - INTC_IRQ(SCIF1_RXI, 186), INTC_IRQ(SCIF1_TXI, 187), - INTC_IRQ(SCIF2_BRI, 188), INTC_IRQ(SCIF2_ERI, 189), - INTC_IRQ(SCIF2_RXI, 190), INTC_IRQ(SCIF2_TXI, 191), - INTC_IRQ(SCIF3_BRI, 192), INTC_IRQ(SCIF3_ERI, 193), - INTC_IRQ(SCIF3_RXI, 194), INTC_IRQ(SCIF3_TXI, 195), - INTC_IRQ(SCIF4_BRI, 196), INTC_IRQ(SCIF4_ERI, 197), - INTC_IRQ(SCIF4_RXI, 198), INTC_IRQ(SCIF4_TXI, 199), - INTC_IRQ(SCIF5_BRI, 200), INTC_IRQ(SCIF5_ERI, 201), - INTC_IRQ(SCIF5_RXI, 202), INTC_IRQ(SCIF5_TXI, 203), - INTC_IRQ(SCIF6_BRI, 204), INTC_IRQ(SCIF6_ERI, 205), - INTC_IRQ(SCIF6_RXI, 206), INTC_IRQ(SCIF6_TXI, 207), - INTC_IRQ(SCIF7_BRI, 208), INTC_IRQ(SCIF7_ERI, 209), - INTC_IRQ(SCIF7_RXI, 210), INTC_IRQ(SCIF7_TXI, 211), + INTC_IRQ(SCIF0, 180), INTC_IRQ(SCIF0, 181), + INTC_IRQ(SCIF0, 182), INTC_IRQ(SCIF0, 183), + INTC_IRQ(SCIF1, 184), INTC_IRQ(SCIF1, 185), + INTC_IRQ(SCIF1, 186), INTC_IRQ(SCIF1, 187), + INTC_IRQ(SCIF2, 188), INTC_IRQ(SCIF2, 189), + INTC_IRQ(SCIF2, 190), INTC_IRQ(SCIF2, 191), + INTC_IRQ(SCIF3, 192), INTC_IRQ(SCIF3, 193), + INTC_IRQ(SCIF3, 194), INTC_IRQ(SCIF3, 195), + INTC_IRQ(SCIF4, 196), INTC_IRQ(SCIF4, 197), + INTC_IRQ(SCIF4, 198), INTC_IRQ(SCIF4, 199), + INTC_IRQ(SCIF5, 200), INTC_IRQ(SCIF5, 201), + INTC_IRQ(SCIF5, 202), INTC_IRQ(SCIF5, 203), + INTC_IRQ(SCIF6, 204), INTC_IRQ(SCIF6, 205), + INTC_IRQ(SCIF6, 206), INTC_IRQ(SCIF6, 207), + INTC_IRQ(SCIF7, 208), INTC_IRQ(SCIF7, 209), + INTC_IRQ(SCIF7, 210), INTC_IRQ(SCIF7, 211), INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216), INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218), INTC_IRQ(DMAC7_DMINT7, 219), - INTC_IRQ(RCAN0_ERS, 228), INTC_IRQ(RCAN0_OVR, 229), - INTC_IRQ(RCAN0_SLE, 230), - INTC_IRQ(RCAN0_RM0, 231), INTC_IRQ(RCAN0_RM1, 232), + INTC_IRQ(RCAN0, 228), INTC_IRQ(RCAN0, 229), + INTC_IRQ(RCAN0, 230), + INTC_IRQ(RCAN0, 231), INTC_IRQ(RCAN0, 232), - INTC_IRQ(RCAN1_ERS, 234), INTC_IRQ(RCAN1_OVR, 235), - INTC_IRQ(RCAN1_SLE, 236), - INTC_IRQ(RCAN1_RM0, 237), INTC_IRQ(RCAN1_RM1, 238), + INTC_IRQ(RCAN1, 234), INTC_IRQ(RCAN1, 235), + INTC_IRQ(RCAN1, 236), + INTC_IRQ(RCAN1, 237), INTC_IRQ(RCAN1, 238), INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245), - INTC_IRQ(TMR0_CMIA0, 246), INTC_IRQ(TMR0_CMIB0, 247), - INTC_IRQ(TMR0_OVI0, 248), - - INTC_IRQ(TMR1_CMIA1, 252), INTC_IRQ(TMR1_CMIB1, 253), - INTC_IRQ(TMR1_OVI1, 254), + INTC_IRQ(TMR0, 246), INTC_IRQ(TMR0, 247), + INTC_IRQ(TMR0, 248), + INTC_IRQ(TMR1, 252), INTC_IRQ(TMR1, 253), + INTC_IRQ(TMR1, 254), }; static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), - INTC_GROUP(MTU20_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), - INTC_GROUP(MTU20_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), - - INTC_GROUP(MTU21_AB, MTU2_TGI1A, MTU2_TGI1B), - INTC_GROUP(MTU21_VU, MTU2_TCI1V, MTU2_TCI1U), - INTC_GROUP(MTU22_AB, MTU2_TGI2A, MTU2_TGI2B), - INTC_GROUP(MTU22_VU, MTU2_TCI2V, MTU2_TCI2U), - INTC_GROUP(MTU23_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), - INTC_GROUP(MTU24_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), - INTC_GROUP(MTU25_UVW, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), - INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP ), - - INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, - IIC30_TEI), - INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, - IIC31_TEI), - INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, - IIC32_TEI), - - INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), - INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), - INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI), - INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI), - INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI), - INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI), - - INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, - RCAN0_SLE), - INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, - RCAN1_SLE), - - INTC_GROUP(TMR0, TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0), - INTC_GROUP(TMR1, TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1), }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -212,7 +158,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } }, { 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } }, - { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0 , SCIF1 } }, + { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0, SCIF1 } }, { 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } }, { 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4 } }, { 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } }, @@ -234,42 +180,42 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 181, 182, 183, 180} + .irqs = { 180, 180, 180, 180 } }, { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 185, 186, 187, 184} + .irqs = { 184, 184, 184, 184 } }, { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 189, 186, 187, 188} + .irqs = { 188, 188, 188, 188 } }, { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 193, 194, 195, 192} + .irqs = { 192, 192, 192, 192 } }, { .mapbase = 0xfffea000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 196, 198, 199, 196} + .irqs = { 196, 196, 196, 196 } }, { .mapbase = 0xfffea800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 201, 202, 203, 200} + .irqs = { 200, 200, 200, 200 } }, { .mapbase = 0xfffeb000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 205, 206, 207, 204} + .irqs = { 204, 204, 204, 204 } }, { .mapbase = 0xfffeb800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 209, 210, 211, 208} + .irqs = { 208, 208, 208, 208 } }, { .flags = 0, } @@ -290,17 +236,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 153, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 154, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 152, .flags = IORESOURCE_IRQ, }, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index e98dc4450352..820dfb2e8656 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -1,7 +1,7 @@ /* * SH7203 and SH7263 Setup * - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -18,50 +18,27 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, - DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI, - DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI, - DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI, - DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI, + DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, USB, LCDC, CMT0, CMT1, BSC, WDT, - MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, - MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, - MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, - MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, - ADC_ADI, - IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI, - IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI, - IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI, - IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, IIC33_TEI, - SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, - SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, - SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, - SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI, - SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI, - SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII, - /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */ - ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF, - ROMDEC_IREADY, + MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU4_ABCD, MTU2_TCI3V, MTU2_TCI4V, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + ADC_ADI, + + IIC30, IIC31, IIC32, IIC33, + SCIF0, SCIF1, SCIF2, SCIF3, - SDHI3, SDHI0, SDHI1, + SSU0, SSU1, - RTC_ARM, RTC_PRD, RTC_CUP, - RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, RCAN0_SLE, - RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE, + SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII, - SRC_OVF, SRC_ODFI, SRC_IDEI, IEBI, + /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */ + ROMDEC, FLCTL, SDHI, RTC, RCAN0, RCAN1, + SRC, IEBI, /* interrupt groups */ - PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, - MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, - MTU3_ABCD, MTU4_ABCD, - IIC30, IIC31, IIC32, IIC33, SCIF0, SCIF1, SCIF2, SCIF3, - SSU0, SSU1, ROMDEC, SDHI, FLCTL, RTC, RCAN0, RCAN1, SRC + PINT, }; static struct intc_vect vectors[] __initdata = { @@ -73,79 +50,80 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), - INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109), - INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113), - INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117), - INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121), - INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125), - INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129), - INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133), - INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137), + INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109), + INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113), + INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117), + INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121), + INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125), + INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129), + INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133), + INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137), INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141), INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143), INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145), - INTC_IRQ(MTU2_TGI0A, 146), INTC_IRQ(MTU2_TGI0B, 147), - INTC_IRQ(MTU2_TGI0C, 148), INTC_IRQ(MTU2_TGI0D, 149), - INTC_IRQ(MTU2_TCI0V, 150), - INTC_IRQ(MTU2_TGI0E, 151), INTC_IRQ(MTU2_TGI0F, 152), - INTC_IRQ(MTU2_TGI1A, 153), INTC_IRQ(MTU2_TGI1B, 154), - INTC_IRQ(MTU2_TCI1V, 155), INTC_IRQ(MTU2_TCI1U, 156), - INTC_IRQ(MTU2_TGI2A, 157), INTC_IRQ(MTU2_TGI2B, 158), - INTC_IRQ(MTU2_TCI2V, 159), INTC_IRQ(MTU2_TCI2U, 160), - INTC_IRQ(MTU2_TGI3A, 161), INTC_IRQ(MTU2_TGI3B, 162), - INTC_IRQ(MTU2_TGI3C, 163), INTC_IRQ(MTU2_TGI3D, 164), + INTC_IRQ(MTU0_ABCD, 146), INTC_IRQ(MTU0_ABCD, 147), + INTC_IRQ(MTU0_ABCD, 148), INTC_IRQ(MTU0_ABCD, 149), + INTC_IRQ(MTU0_VEF, 150), + INTC_IRQ(MTU0_VEF, 151), INTC_IRQ(MTU0_VEF, 152), + INTC_IRQ(MTU1_AB, 153), INTC_IRQ(MTU1_AB, 154), + INTC_IRQ(MTU1_VU, 155), INTC_IRQ(MTU1_VU, 156), + INTC_IRQ(MTU2_AB, 157), INTC_IRQ(MTU2_AB, 158), + INTC_IRQ(MTU2_VU, 159), INTC_IRQ(MTU2_VU, 160), + INTC_IRQ(MTU3_ABCD, 161), INTC_IRQ(MTU3_ABCD, 162), + INTC_IRQ(MTU3_ABCD, 163), INTC_IRQ(MTU3_ABCD, 164), INTC_IRQ(MTU2_TCI3V, 165), - INTC_IRQ(MTU2_TGI4A, 166), INTC_IRQ(MTU2_TGI4B, 167), - INTC_IRQ(MTU2_TGI4C, 168), INTC_IRQ(MTU2_TGI4D, 169), + INTC_IRQ(MTU4_ABCD, 166), INTC_IRQ(MTU4_ABCD, 167), + INTC_IRQ(MTU4_ABCD, 168), INTC_IRQ(MTU4_ABCD, 169), INTC_IRQ(MTU2_TCI4V, 170), INTC_IRQ(ADC_ADI, 171), - INTC_IRQ(IIC30_STPI, 172), INTC_IRQ(IIC30_NAKI, 173), - INTC_IRQ(IIC30_RXI, 174), INTC_IRQ(IIC30_TXI, 175), - INTC_IRQ(IIC30_TEI, 176), - INTC_IRQ(IIC31_STPI, 177), INTC_IRQ(IIC31_NAKI, 178), - INTC_IRQ(IIC31_RXI, 179), INTC_IRQ(IIC31_TXI, 180), - INTC_IRQ(IIC31_TEI, 181), - INTC_IRQ(IIC32_STPI, 182), INTC_IRQ(IIC32_NAKI, 183), - INTC_IRQ(IIC32_RXI, 184), INTC_IRQ(IIC32_TXI, 185), - INTC_IRQ(IIC32_TEI, 186), - INTC_IRQ(IIC33_STPI, 187), INTC_IRQ(IIC33_NAKI, 188), - INTC_IRQ(IIC33_RXI, 189), INTC_IRQ(IIC33_TXI, 190), - INTC_IRQ(IIC33_TEI, 191), - INTC_IRQ(SCIF0_BRI, 192), INTC_IRQ(SCIF0_ERI, 193), - INTC_IRQ(SCIF0_RXI, 194), INTC_IRQ(SCIF0_TXI, 195), - INTC_IRQ(SCIF1_BRI, 196), INTC_IRQ(SCIF1_ERI, 197), - INTC_IRQ(SCIF1_RXI, 198), INTC_IRQ(SCIF1_TXI, 199), - INTC_IRQ(SCIF2_BRI, 200), INTC_IRQ(SCIF2_ERI, 201), - INTC_IRQ(SCIF2_RXI, 202), INTC_IRQ(SCIF2_TXI, 203), - INTC_IRQ(SCIF3_BRI, 204), INTC_IRQ(SCIF3_ERI, 205), - INTC_IRQ(SCIF3_RXI, 206), INTC_IRQ(SCIF3_TXI, 207), - INTC_IRQ(SSU0_SSERI, 208), INTC_IRQ(SSU0_SSRXI, 209), - INTC_IRQ(SSU0_SSTXI, 210), - INTC_IRQ(SSU1_SSERI, 211), INTC_IRQ(SSU1_SSRXI, 212), - INTC_IRQ(SSU1_SSTXI, 213), + INTC_IRQ(IIC30, 172), INTC_IRQ(IIC30, 173), + INTC_IRQ(IIC30, 174), INTC_IRQ(IIC30, 175), + INTC_IRQ(IIC30, 176), + INTC_IRQ(IIC31, 177), INTC_IRQ(IIC31, 178), + INTC_IRQ(IIC31, 179), INTC_IRQ(IIC31, 180), + INTC_IRQ(IIC31, 181), + INTC_IRQ(IIC32, 182), INTC_IRQ(IIC32, 183), + INTC_IRQ(IIC32, 184), INTC_IRQ(IIC32, 185), + INTC_IRQ(IIC32, 186), + INTC_IRQ(IIC33, 187), INTC_IRQ(IIC33, 188), + INTC_IRQ(IIC33, 189), INTC_IRQ(IIC33, 190), + INTC_IRQ(IIC33, 191), + INTC_IRQ(SCIF0, 192), INTC_IRQ(SCIF0, 193), + INTC_IRQ(SCIF0, 194), INTC_IRQ(SCIF0, 195), + INTC_IRQ(SCIF1, 196), INTC_IRQ(SCIF1, 197), + INTC_IRQ(SCIF1, 198), INTC_IRQ(SCIF1, 199), + INTC_IRQ(SCIF2, 200), INTC_IRQ(SCIF2, 201), + INTC_IRQ(SCIF2, 202), INTC_IRQ(SCIF2, 203), + INTC_IRQ(SCIF3, 204), INTC_IRQ(SCIF3, 205), + INTC_IRQ(SCIF3, 206), INTC_IRQ(SCIF3, 207), + INTC_IRQ(SSU0, 208), INTC_IRQ(SSU0, 209), + INTC_IRQ(SSU0, 210), + INTC_IRQ(SSU1, 211), INTC_IRQ(SSU1, 212), + INTC_IRQ(SSU1, 213), INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215), INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217), - INTC_IRQ(FLCTL_FLSTEI, 224), INTC_IRQ(FLCTL_FLTENDI, 225), - INTC_IRQ(FLCTL_FLTREQ0I, 226), INTC_IRQ(FLCTL_FLTREQ1I, 227), - INTC_IRQ(RTC_ARM, 231), INTC_IRQ(RTC_PRD, 232), - INTC_IRQ(RTC_CUP, 233), - INTC_IRQ(RCAN0_ERS, 234), INTC_IRQ(RCAN0_OVR, 235), - INTC_IRQ(RCAN0_RM0, 236), INTC_IRQ(RCAN0_RM1, 237), - INTC_IRQ(RCAN0_SLE, 238), - INTC_IRQ(RCAN1_ERS, 239), INTC_IRQ(RCAN1_OVR, 240), - INTC_IRQ(RCAN1_RM0, 241), INTC_IRQ(RCAN1_RM1, 242), - INTC_IRQ(RCAN1_SLE, 243), + INTC_IRQ(FLCTL, 224), INTC_IRQ(FLCTL, 225), + INTC_IRQ(FLCTL, 226), INTC_IRQ(FLCTL, 227), + INTC_IRQ(RTC, 231), INTC_IRQ(RTC, 232), + INTC_IRQ(RTC, 233), + INTC_IRQ(RCAN0, 234), INTC_IRQ(RCAN0, 235), + INTC_IRQ(RCAN0, 236), INTC_IRQ(RCAN0, 237), + INTC_IRQ(RCAN0, 238), + INTC_IRQ(RCAN1, 239), INTC_IRQ(RCAN1, 240), + INTC_IRQ(RCAN1, 241), INTC_IRQ(RCAN1, 242), + INTC_IRQ(RCAN1, 243), /* SH7263-specific trash */ #ifdef CONFIG_CPU_SUBTYPE_SH7263 - INTC_IRQ(ROMDEC_ISY, 218), INTC_IRQ(ROMDEC_IERR, 219), - INTC_IRQ(ROMDEC_IARG, 220), INTC_IRQ(ROMDEC_ISEC, 221), - INTC_IRQ(ROMDEC_IBUF, 222), INTC_IRQ(ROMDEC_IREADY, 223), + INTC_IRQ(ROMDEC, 218), INTC_IRQ(ROMDEC, 219), + INTC_IRQ(ROMDEC, 220), INTC_IRQ(ROMDEC, 221), + INTC_IRQ(ROMDEC, 222), INTC_IRQ(ROMDEC, 223), - INTC_IRQ(SDHI3, 228), INTC_IRQ(SDHI0, 229), INTC_IRQ(SDHI1, 230), + INTC_IRQ(SDHI, 228), INTC_IRQ(SDHI, 229), + INTC_IRQ(SDHI, 230), - INTC_IRQ(SRC_OVF, 244), INTC_IRQ(SRC_ODFI, 245), - INTC_IRQ(SRC_IDEI, 246), + INTC_IRQ(SRC, 244), INTC_IRQ(SRC, 245), + INTC_IRQ(SRC, 246), INTC_IRQ(IEBI, 247), #endif @@ -154,50 +132,6 @@ static struct intc_vect vectors[] __initdata = { static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), - INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI), - INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI), - INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI), - INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI), - INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI), - INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI), - INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI), - INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI), - INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), - INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), - INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B), - INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U), - INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B), - INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U), - INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), - INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), - INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, - IIC30_TEI), - INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, - IIC31_TEI), - INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, - IIC32_TEI), - INTC_GROUP(IIC33, IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, - IIC33_TEI), - INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), - INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), - INTC_GROUP(SSU0, SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI), - INTC_GROUP(SSU1, SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI), - INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, - FLCTL_FLTREQ1I), - INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP), - INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, - RCAN0_SLE), - INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, - RCAN1_SLE), - -#ifdef CONFIG_CPU_SUBTYPE_SH7263 - INTC_GROUP(ROMDEC, ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, - ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY), - INTC_GROUP(SDHI, SDHI3, SDHI0, SDHI1), - INTC_GROUP(SRC, SRC_OVF, SRC_ODFI, SRC_IDEI), -#endif }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -242,22 +176,22 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 193, 194, 195, 192 }, + .irqs = { 192, 192, 192, 192 }, }, { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 197, 198, 199, 196 }, + .irqs = { 196, 196, 196, 196 }, }, { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 201, 202, 203, 200 }, + .irqs = { 200, 200, 200, 200 }, }, { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 205, 206, 207, 204 }, + .irqs = { 204, 204, 204, 204 }, }, { .flags = 0, } @@ -278,17 +212,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 232, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 233, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 231, .flags = IORESOURCE_IRQ, }, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index e6d4ec445dd8..c46a8355726d 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -2,6 +2,7 @@ * SH7206 Setup * * Copyright (C) 2006 Yoshinori Sato + * Copyright (C) 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -19,34 +20,23 @@ enum { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, ADC_ADI0, ADC_ADI1, - DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI, - DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI, - DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI, - DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI, + + DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, + + MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S, + IIC3, + CMT0, CMT1, BSC, WDT, - MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, - MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, - MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, - MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, - MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, - MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, - MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, - POE2_OEI1, POE2_OEI2, - MTU2S_TGI3A, MTU2S_TGI3B, MTU2S_TGI3C, MTU2S_TGI3D, MTU2S_TCI3V, - MTU2S_TGI4A, MTU2S_TGI4B, MTU2S_TGI4C, MTU2S_TGI4D, MTU2S_TCI4V, - MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W, + + MTU2_TCI3V, MTU2_TCI4V, MTU2S_TCI3V, MTU2S_TCI4V, + POE2_OEI3, - IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI, - SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, - SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, - SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, + + SCIF0, SCIF1, SCIF2, SCIF3, /* interrupt groups */ - PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, - MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, - MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S, - IIC3, SCIF0, SCIF1, SCIF2, SCIF3, + PINT, }; static struct intc_vect vectors[] __initdata = { @@ -59,86 +49,58 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96), - INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109), - INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113), - INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117), - INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121), - INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125), - INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129), - INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133), - INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137), + INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109), + INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113), + INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117), + INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121), + INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125), + INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129), + INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133), + INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137), INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144), INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152), - INTC_IRQ(MTU2_TGI0A, 156), INTC_IRQ(MTU2_TGI0B, 157), - INTC_IRQ(MTU2_TGI0C, 158), INTC_IRQ(MTU2_TGI0D, 159), - INTC_IRQ(MTU2_TCI0V, 160), - INTC_IRQ(MTU2_TGI0E, 161), INTC_IRQ(MTU2_TGI0F, 162), - INTC_IRQ(MTU2_TGI1A, 164), INTC_IRQ(MTU2_TGI1B, 165), - INTC_IRQ(MTU2_TCI1V, 168), INTC_IRQ(MTU2_TCI1U, 169), - INTC_IRQ(MTU2_TGI2A, 172), INTC_IRQ(MTU2_TGI2B, 173), - INTC_IRQ(MTU2_TCI2V, 176), INTC_IRQ(MTU2_TCI2U, 177), - INTC_IRQ(MTU2_TGI3A, 180), INTC_IRQ(MTU2_TGI3B, 181), - INTC_IRQ(MTU2_TGI3C, 182), INTC_IRQ(MTU2_TGI3D, 183), + INTC_IRQ(MTU0_ABCD, 156), INTC_IRQ(MTU0_ABCD, 157), + INTC_IRQ(MTU0_ABCD, 158), INTC_IRQ(MTU0_ABCD, 159), + INTC_IRQ(MTU0_VEF, 160), INTC_IRQ(MTU0_VEF, 161), + INTC_IRQ(MTU0_VEF, 162), + INTC_IRQ(MTU1_AB, 164), INTC_IRQ(MTU1_AB, 165), + INTC_IRQ(MTU1_VU, 168), INTC_IRQ(MTU1_VU, 169), + INTC_IRQ(MTU2_AB, 172), INTC_IRQ(MTU2_AB, 173), + INTC_IRQ(MTU2_VU, 176), INTC_IRQ(MTU2_VU, 177), + INTC_IRQ(MTU3_ABCD, 180), INTC_IRQ(MTU3_ABCD, 181), + INTC_IRQ(MTU3_ABCD, 182), INTC_IRQ(MTU3_ABCD, 183), INTC_IRQ(MTU2_TCI3V, 184), - INTC_IRQ(MTU2_TGI4A, 188), INTC_IRQ(MTU2_TGI4B, 189), - INTC_IRQ(MTU2_TGI4C, 190), INTC_IRQ(MTU2_TGI4D, 191), + INTC_IRQ(MTU4_ABCD, 188), INTC_IRQ(MTU4_ABCD, 189), + INTC_IRQ(MTU4_ABCD, 190), INTC_IRQ(MTU4_ABCD, 191), INTC_IRQ(MTU2_TCI4V, 192), - INTC_IRQ(MTU2_TGI5U, 196), INTC_IRQ(MTU2_TGI5V, 197), - INTC_IRQ(MTU2_TGI5W, 198), - INTC_IRQ(POE2_OEI1, 200), INTC_IRQ(POE2_OEI2, 201), - INTC_IRQ(MTU2S_TGI3A, 204), INTC_IRQ(MTU2S_TGI3B, 205), - INTC_IRQ(MTU2S_TGI3C, 206), INTC_IRQ(MTU2S_TGI3D, 207), + INTC_IRQ(MTU5, 196), INTC_IRQ(MTU5, 197), + INTC_IRQ(MTU5, 198), + INTC_IRQ(POE2_12, 200), INTC_IRQ(POE2_12, 201), + INTC_IRQ(MTU3S_ABCD, 204), INTC_IRQ(MTU3S_ABCD, 205), + INTC_IRQ(MTU3S_ABCD, 206), INTC_IRQ(MTU3S_ABCD, 207), INTC_IRQ(MTU2S_TCI3V, 208), - INTC_IRQ(MTU2S_TGI4A, 212), INTC_IRQ(MTU2S_TGI4B, 213), - INTC_IRQ(MTU2S_TGI4C, 214), INTC_IRQ(MTU2S_TGI4D, 215), + INTC_IRQ(MTU4S_ABCD, 212), INTC_IRQ(MTU4S_ABCD, 213), + INTC_IRQ(MTU4S_ABCD, 214), INTC_IRQ(MTU4S_ABCD, 215), INTC_IRQ(MTU2S_TCI4V, 216), - INTC_IRQ(MTU2S_TGI5U, 220), INTC_IRQ(MTU2S_TGI5V, 221), - INTC_IRQ(MTU2S_TGI5W, 222), + INTC_IRQ(MTU5S, 220), INTC_IRQ(MTU5S, 221), + INTC_IRQ(MTU5S, 222), INTC_IRQ(POE2_OEI3, 224), - INTC_IRQ(IIC3_STPI, 228), INTC_IRQ(IIC3_NAKI, 229), - INTC_IRQ(IIC3_RXI, 230), INTC_IRQ(IIC3_TXI, 231), - INTC_IRQ(IIC3_TEI, 232), - INTC_IRQ(SCIF0_BRI, 240), INTC_IRQ(SCIF0_ERI, 241), - INTC_IRQ(SCIF0_RXI, 242), INTC_IRQ(SCIF0_TXI, 243), - INTC_IRQ(SCIF1_BRI, 244), INTC_IRQ(SCIF1_ERI, 245), - INTC_IRQ(SCIF1_RXI, 246), INTC_IRQ(SCIF1_TXI, 247), - INTC_IRQ(SCIF2_BRI, 248), INTC_IRQ(SCIF2_ERI, 249), - INTC_IRQ(SCIF2_RXI, 250), INTC_IRQ(SCIF2_TXI, 251), - INTC_IRQ(SCIF3_BRI, 252), INTC_IRQ(SCIF3_ERI, 253), - INTC_IRQ(SCIF3_RXI, 254), INTC_IRQ(SCIF3_TXI, 255), + INTC_IRQ(IIC3, 228), INTC_IRQ(IIC3, 229), + INTC_IRQ(IIC3, 230), INTC_IRQ(IIC3, 231), + INTC_IRQ(IIC3, 232), + INTC_IRQ(SCIF0, 240), INTC_IRQ(SCIF0, 241), + INTC_IRQ(SCIF0, 242), INTC_IRQ(SCIF0, 243), + INTC_IRQ(SCIF1, 244), INTC_IRQ(SCIF1, 245), + INTC_IRQ(SCIF1, 246), INTC_IRQ(SCIF1, 247), + INTC_IRQ(SCIF2, 248), INTC_IRQ(SCIF2, 249), + INTC_IRQ(SCIF2, 250), INTC_IRQ(SCIF2, 251), + INTC_IRQ(SCIF3, 252), INTC_IRQ(SCIF3, 253), + INTC_IRQ(SCIF3, 254), INTC_IRQ(SCIF3, 255), }; static struct intc_group groups[] __initdata = { INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7), - INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI), - INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI), - INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI), - INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI), - INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI), - INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI), - INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI), - INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI), - INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), - INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), - INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B), - INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U), - INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B), - INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U), - INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), - INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), - INTC_GROUP(MTU5, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), - INTC_GROUP(POE2_12, POE2_OEI1, POE2_OEI2), - INTC_GROUP(MTU3S_ABCD, MTU2S_TGI3A, MTU2S_TGI3B, - MTU2S_TGI3C, MTU2S_TGI3D), - INTC_GROUP(MTU4S_ABCD, MTU2S_TGI4A, MTU2S_TGI4B, - MTU2S_TGI4C, MTU2S_TGI4D), - INTC_GROUP(MTU5S, MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W), - INTC_GROUP(IIC3, IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI), - INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), - INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), - INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -174,22 +136,22 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 241, 242, 243, 240 }, + .irqs = { 240, 240, 240, 240 }, }, { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 245, 246, 247, 244 }, + .irqs = { 244, 244, 244, 244 }, }, { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 249, 250, 251, 248 }, + .irqs = { 248, 248, 248, 248 }, }, { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 253, 254, 255, 252 }, + .irqs = { 252, 252, 252, 252 }, }, { .flags = 0, } diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index e07c69e16d9b..ecab274141a8 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -4,6 +4,8 @@ obj-y := ex.o probe.o entry.o setup-sh3.o +obj-$(CONFIG_HIBERNATION) += swsusp.o + # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index b4106d0c68ec..55da0ff9848d 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -16,6 +16,7 @@ #include <asm/unistd.h> #include <cpu/mmu_context.h> #include <asm/page.h> +#include <asm/cache.h> ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -187,44 +188,35 @@ call_dae: #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ ENTRY(sh_bios_handler) - mov.l @r15+, r0 - mov.l @r15+, r1 - mov.l @r15+, r2 - mov.l @r15+, r3 - mov.l @r15+, r4 - mov.l @r15+, r5 - mov.l @r15+, r6 - mov.l @r15+, r7 - stc sr, r8 - mov.l 1f, r9 ! BL =1, RB=1, IMASK=0x0F - or r9, r8 - ldc r8, sr ! here, change the register bank - mov.l @r15+, r8 - mov.l @r15+, r9 - mov.l @r15+, r10 - mov.l @r15+, r11 - mov.l @r15+, r12 - mov.l @r15+, r13 - mov.l @r15+, r14 - mov.l @r15+, k0 - ldc.l @r15+, spc - lds.l @r15+, pr - mov.l @r15+, k1 - ldc.l @r15+, gbr - lds.l @r15+, mach - lds.l @r15+, macl - mov k0, r15 + mov.l 1f, r8 + bsr restore_regs + nop + + lds k2, pr ! restore pr + mov k4, r15 ! mov.l 2f, k0 mov.l @k0, k0 jmp @k0 - ldc k1, ssr + ldc k3, ssr .align 2 1: .long 0x300000f0 2: .long gdb_vbr_vector #endif /* CONFIG_SH_STANDARD_BIOS */ -restore_all: +! restore_regs() +! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack +! - switch bank +! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack +! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra +! k2 returns original pr +! k3 returns original sr +! k4 returns original stack pointer +! r8 passes SR bitmask, overwritten with restored data on return +! r9 trashed +! BL=0 on entry, on exit BL=1 (depending on r8). + +ENTRY(restore_regs) mov.l @r15+, r0 mov.l @r15+, r1 mov.l @r15+, r2 @@ -234,10 +226,9 @@ restore_all: mov.l @r15+, r6 mov.l @r15+, r7 ! - stc sr, r8 - mov.l 7f, r9 - or r9, r8 ! BL =1, RB=1 - ldc r8, sr ! here, change the register bank + stc sr, r9 + or r8, r9 + ldc r9, sr ! mov.l @r15+, r8 mov.l @r15+, r9 @@ -248,12 +239,20 @@ restore_all: mov.l @r15+, r14 mov.l @r15+, k4 ! original stack pointer ldc.l @r15+, spc - lds.l @r15+, pr + mov.l @r15+, k2 ! original PR mov.l @r15+, k3 ! original SR ldc.l @r15+, gbr lds.l @r15+, mach lds.l @r15+, macl - add #4, r15 ! Skip syscall number + rts + add #4, r15 ! Skip syscall number + +restore_all: + mov.l 7f, r8 + bsr restore_regs + nop + + lds k2, pr ! restore pr ! #ifdef CONFIG_SH_DSP mov.l @r15+, k0 ! DSP mode marker @@ -294,7 +293,7 @@ skip_restore: mov #0xf0, k1 extu.b k1, k1 not k1, k1 - and k1, k2 ! Mask orignal SR value + and k1, k2 ! Mask original SR value ! mov k3, k0 ! Calculate IMASK-bits shlr2 k0 @@ -313,7 +312,6 @@ skip_restore: mov #0, k1 mov.b k1, @k0 #endif - mov.l @r15+, k2 ! restore EXPEVT mov k4, r15 rte nop @@ -336,81 +334,55 @@ skip_restore: ENTRY(vbr_base) .long 0 ! +! 0x100: General exception vector +! .balign 256,0,256 general_exception: - mov.l 1f, k2 - mov.l 2f, k3 -#ifdef CONFIG_CPU_SUBTYPE_SHX3 - mov.l @k2, k2 +#ifndef CONFIG_CPU_SUBTYPE_SHX3 + bra handle_exception + sts pr, k3 ! save original pr value in k3 +#else + mov.l 1f, k4 + mov.l @k4, k4 ! Is EXPEVT larger than 0x800? mov #0x8, k0 shll8 k0 - cmp/hs k0, k2 + cmp/hs k0, k4 bf 0f ! then add 0x580 (k2 is 0xd80 or 0xda0) mov #0x58, k0 shll2 k0 shll2 k0 - add k0, k2 + add k0, k4 0: - bra handle_exception + ! Setup stack and save DSP context (k0 contains original r15 on return) + bsr prepare_stack_save_dsp nop -#else - bra handle_exception - mov.l @k2, k2 -#endif - .align 2 -1: .long EXPEVT -2: .long ret_from_exception -! -! - .balign 1024,0,1024 -tlb_miss: - mov.l 1f, k2 - mov.l 4f, k3 - bra handle_exception - mov.l @k2, k2 -! - .balign 512,0,512 -interrupt: - mov.l 3f, k3 -#if defined(CONFIG_KGDB) - mov.l 2f, k2 - ! Debounce (filter nested NMI) - mov.l @k2, k0 - mov.l 5f, k1 - cmp/eq k1, k0 - bf 0f - mov.l 6f, k1 - tas.b @k1 - bt 0f - rte + ! Save registers / Switch to bank 0 + mov k4, k2 ! keep vector in k2 + mov.l 1f, k4 ! SR bits to clear in k4 + bsr save_regs ! needs original pr value in k3 + nop + + bra handle_exception_special nop - .align 2 -2: .long INTEVT -5: .long NMI_VEC -6: .long in_nmi -0: -#endif /* defined(CONFIG_KGDB) */ - bra handle_exception - mov #-1, k2 ! interrupt exception marker .align 2 1: .long EXPEVT -3: .long ret_from_irq -4: .long ret_from_exception +#endif -! -! - .align 2 -ENTRY(handle_exception) - ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), - ! save all registers onto stack. - ! +! prepare_stack_save_dsp() +! - roll back gRB +! - switch to kernel stack +! - save DSP +! k0 returns original sp (after roll back) +! k1 trashed +! k2 trashed +prepare_stack_save_dsp: #ifdef CONFIG_GUSA ! Check for roll back gRB (User and Kernel) mov r15, k0 @@ -430,7 +402,7 @@ ENTRY(handle_exception) 2: mov k1, r15 ! SP = r1 1: #endif - + ! Switch to kernel stack if needed stc ssr, k0 ! Is it from kernel space? shll k0 ! Check MD bit (bit30) by shifting it into... shll k0 ! ...the T bit @@ -443,18 +415,17 @@ ENTRY(handle_exception) add current, k1 mov k1, r15 ! change to kernel stack ! -1: mov.l 2f, k1 - ! +1: #ifdef CONFIG_SH_DSP - mov.l r2, @-r15 ! Save r2, we need another reg - stc sr, k4 - mov.l 1f, r2 - tst r2, k4 ! Check if in DSP mode - mov.l @r15+, r2 ! Restore r2 now + ! Save DSP context if needed + stc sr, k1 + mov #0x10, k2 + shll8 k2 ! DSP=1 (0x00001000) + tst k2, k1 ! Check if in DSP mode (passed in k2) bt/s skip_save - mov #0, k4 ! Set marker for no stack frame + mov #0, k1 ! Set marker for no stack frame - mov r2, k4 ! Backup r2 (in k4) for later + mov k2, k1 ! Save has-frame marker ! Save DSP registers on stack stc.l mod, @-r15 @@ -473,35 +444,74 @@ ENTRY(handle_exception) ! as we're not at all interested in supporting ancient toolchains at ! this point. -- PFM. - mov r15, r2 + mov r15, k2 .word 0xf653 ! movs.l a1, @-r2 .word 0xf6f3 ! movs.l a0g, @-r2 .word 0xf6d3 ! movs.l a1g, @-r2 .word 0xf6c3 ! movs.l m0, @-r2 .word 0xf6e3 ! movs.l m1, @-r2 - mov r2, r15 + mov k2, r15 - mov k4, r2 ! Restore r2 - mov.l 1f, k4 ! Force DSP stack frame skip_save: - mov.l k4, @-r15 ! Push DSP mode marker onto stack + mov.l k1, @-r15 ! Push DSP mode marker onto stack #endif - ! Save the user registers on the stack. - mov.l k2, @-r15 ! EXPEVT - - mov #-1, k4 - mov.l k4, @-r15 ! set TRA (default: -1) - ! + rts + nop +! +! 0x400: Instruction and Data TLB miss exception vector +! + .balign 1024,0,1024 +tlb_miss: + sts pr, k3 ! save original pr value in k3 + +handle_exception: + mova exception_data, k0 + + ! Setup stack and save DSP context (k0 contains original r15 on return) + bsr prepare_stack_save_dsp + PREF(k0) + + ! Save registers / Switch to bank 0 + mov.l 5f, k2 ! vector register address + mov.l 1f, k4 ! SR bits to clear in k4 + bsr save_regs ! needs original pr value in k3 + mov.l @k2, k2 ! read out vector and keep in k2 + +handle_exception_special: + ! Setup return address and jump to exception handler + mov.l 7f, r9 ! fetch return address + stc r2_bank, r0 ! k2 (vector) + mov.l 6f, r10 + shlr2 r0 + shlr r0 + mov.l @(r0, r10), r10 + jmp @r10 + lds r9, pr ! put return address in pr + + .align L1_CACHE_SHIFT + +! save_regs() +! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack +! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack +! - switch bank +! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack +! k0 contains original stack pointer* +! k1 trashed +! k3 passes original pr* +! k4 passes SR bitmask +! BL=1 on entry, on exit BL=0. + +ENTRY(save_regs) + mov #-1, r1 + mov.l k1, @-r15 ! set TRA (default: -1) sts.l macl, @-r15 sts.l mach, @-r15 stc.l gbr, @-r15 stc.l ssr, @-r15 - sts.l pr, @-r15 + mov.l k3, @-r15 ! original pr in k3 stc.l spc, @-r15 - ! - lds k3, pr ! Set the return address to pr - ! - mov.l k0, @-r15 ! save orignal stack + + mov.l k0, @-r15 ! original stack pointer in k0 mov.l r14, @-r15 mov.l r13, @-r15 mov.l r12, @-r15 @@ -509,13 +519,23 @@ skip_save: mov.l r10, @-r15 mov.l r9, @-r15 mov.l r8, @-r15 - ! - stc sr, r8 ! Back to normal register bank, and - or k1, r8 ! Block all interrupts - mov.l 3f, k1 - and k1, r8 ! ... - ldc r8, sr ! ...changed here. - ! + + mov.l 0f, k3 ! SR bits to set in k3 + + ! fall-through + +! save_low_regs() +! - modify SR for bank switch +! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack +! k3 passes bits to set in SR +! k4 passes bits to clear in SR + +ENTRY(save_low_regs) + stc sr, r8 + or k3, r8 + and k4, r8 + ldc r8, sr + mov.l r7, @-r15 mov.l r6, @-r15 mov.l r5, @-r15 @@ -523,52 +543,63 @@ skip_save: mov.l r3, @-r15 mov.l r2, @-r15 mov.l r1, @-r15 - mov.l r0, @-r15 - - /* - * This gets a bit tricky.. in the INTEVT case we don't want to use - * the VBR offset as a destination in the jump call table, since all - * of the destinations are the same. In this case, (interrupt) sets - * a marker in r2 (now r2_bank since SR.RB changed), which we check - * to determine the exception type. For all other exceptions, we - * forcibly read EXPEVT from memory and fix up the jump address, in - * the interrupt exception case we jump to do_IRQ() and defer the - * INTEVT read until there. As a bonus, we can also clean up the SR.RB - * checks that do_IRQ() was doing.. - */ - stc r2_bank, r8 - cmp/pz r8 - bf interrupt_exception - shlr2 r8 - shlr r8 - mov.l 4f, r9 - add r8, r9 - mov.l @r9, r9 - jmp @r9 - nop rts - nop + mov.l r0, @-r15 +! +! 0x600: Interrupt / NMI vector +! + .balign 512,0,512 +ENTRY(handle_interrupt) +#if defined(CONFIG_KGDB) + mov.l 2f, k2 + ! Debounce (filter nested NMI) + mov.l @k2, k0 + mov.l 9f, k1 + cmp/eq k1, k0 + bf 11f + mov.l 10f, k1 + tas.b @k1 + bt 11f + rte + nop .align 2 -1: .long 0x00001000 ! DSP=1 -2: .long 0x000080f0 ! FD=1, IMASK=15 -3: .long 0xcfffffff ! RB=0, BL=0 -4: .long exception_handling_table +9: .long NMI_VEC +10: .long in_nmi +11: +#endif /* defined(CONFIG_KGDB) */ + sts pr, k3 ! save original pr value in k3 + mova exception_data, k0 -interrupt_exception: - mov.l 1f, r9 + ! Setup stack and save DSP context (k0 contains original r15 on return) + bsr prepare_stack_save_dsp + PREF(k0) + + ! Save registers / Switch to bank 0 + mov.l 1f, k4 ! SR bits to clear in k4 + bsr save_regs ! needs original pr value in k3 + mov #-1, k2 ! default vector kept in k2 + + ! Setup return address and jump to do_IRQ + mov.l 4f, r9 ! fetch return address + lds r9, pr ! put return address in pr mov.l 2f, r4 - mov.l @r4, r4 + mov.l 3f, r9 + mov.l @r4, r4 ! pass INTEVT vector as arg0 jmp @r9 - mov r15, r5 - rts - nop - - .align 2 -1: .long do_IRQ -2: .long INTEVT + mov r15, r5 ! pass saved registers as arg1 - .align 2 ENTRY(exception_none) rts nop + + .align L1_CACHE_SHIFT +exception_data: +0: .long 0x000080f0 ! FD=1, IMASK=15 +1: .long 0xcfffffff ! RB=0, BL=0 +2: .long INTEVT +3: .long do_IRQ +4: .long ret_from_irq +5: .long EXPEVT +6: .long exception_handling_table +7: .long ret_from_exception diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index 6468ae86b944..63b67badd67e 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -1,7 +1,7 @@ /* * SH7705 Setup * - * Copyright (C) 2006, 2007 Paul Mundt + * Copyright (C) 2006 - 2009 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public @@ -21,51 +21,36 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, PINT07, PINT815, - DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, - SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, - SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, - ADC_ADI, - USB_USI0, USB_USI1, + + DMAC, SCIF0, SCIF2, ADC_ADI, USB, + TPU0, TPU1, TPU2, TPU3, - TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, - REF_RCMI, + TMU0, TMU1, TMU2, - /* interrupt groups */ - RTC, TMU2, DMAC, USB, SCIF2, SCIF0, + RTC, WDT, REF_RCMI, }; static struct intc_vect vectors[] __initdata = { /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), - INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), - INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), - INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), - INTC_VECT(SCIF0_TXI, 0x8e0), - INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920), - INTC_VECT(SCIF2_TXI, 0x960), + INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820), + INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860), + INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0), + INTC_VECT(SCIF0, 0x8e0), + INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920), + INTC_VECT(SCIF2, 0x960), INTC_VECT(ADC_ADI, 0x980), - INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40), + INTC_VECT(USB, 0xa20), INTC_VECT(USB, 0xa40), INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20), INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580), }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), - INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), - INTC_GROUP(USB, USB_USI0, USB_USI1), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } }, @@ -78,7 +63,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; -static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL, NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { @@ -86,12 +71,12 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xa4410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 56, 57, 59 }, + .irqs = { 56, 56, 56 }, }, { .mapbase = 0xa4400000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 52, 53, 55 }, + .irqs = { 52, 52, 52 }, }, { .flags = 0, } @@ -115,14 +100,6 @@ static struct resource rtc_resources[] = { .start = 20, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 22, - .flags = IORESOURCE_IRQ, - }, }; static struct sh_rtc_platform_info rtc_info = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 93c55e2ed952..a74f960b5e79 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -2,6 +2,7 @@ * SH3 Setup code for SH7706, SH7707, SH7708, SH7709 * * Copyright (C) 2007 Magnus Damm + * Copyright (C) 2009 Paul Mundt * * Based on setup-sh7709.c * @@ -24,46 +25,37 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, PINT07, PINT815, - DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, - SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI, - ADC_ADI, + DMAC, SCIF0, SCIF2, SCI, ADC_ADI, LCDC, PCC0, PCC1, - TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, - REF_RCMI, REF_ROVI, - - /* interrupt groups */ - RTC, REF, TMU2, DMAC, SCI, SCIF2, SCIF0, + TMU0, TMU1, TMU2, + RTC, WDT, REF, }; static struct intc_vect vectors[] __initdata = { INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), - INTC_VECT(SCI_ERI, 0x4e0), INTC_VECT(SCI_RXI, 0x500), - INTC_VECT(SCI_TXI, 0x520), INTC_VECT(SCI_TEI, 0x540), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), + INTC_VECT(SCI, 0x4e0), INTC_VECT(SCI, 0x500), + INTC_VECT(SCI, 0x520), INTC_VECT(SCI, 0x540), INTC_VECT(WDT, 0x560), - INTC_VECT(REF_RCMI, 0x580), - INTC_VECT(REF_ROVI, 0x5a0), + INTC_VECT(REF, 0x580), + INTC_VECT(REF, 0x5a0), #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) /* IRQ0->5 are handled in setup-sh3.c */ - INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), - INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), + INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820), + INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860), INTC_VECT(ADC_ADI, 0x980), - INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920), - INTC_VECT(SCIF2_BRI, 0x940), INTC_VECT(SCIF2_TXI, 0x960), + INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920), + INTC_VECT(SCIF2, 0x940), INTC_VECT(SCIF2, 0x960), #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), - INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), - INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), + INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0), + INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0), #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) INTC_VECT(LCDC, 0x9a0), @@ -71,16 +63,6 @@ static struct intc_vect vectors[] __initdata = { #endif }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), - INTC_GROUP(REF, REF_RCMI, REF_ROVI), - INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), - INTC_GROUP(SCI, SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } }, @@ -101,7 +83,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { #endif }; -static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, NULL, NULL, prio_registers, NULL); static struct resource rtc_resources[] = { @@ -111,14 +93,6 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { .start = 20, .flags = IORESOURCE_IRQ, }, @@ -136,7 +110,7 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xfffffe80, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, - .irqs = { 23, 24, 25, 0 }, + .irqs = { 23, 23, 23, 0 }, }, #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ @@ -145,7 +119,7 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xa4000150, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 56, 57, 59, 58 }, + .irqs = { 56, 56, 56, 56 }, }, #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ @@ -154,7 +128,7 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xa4000140, .flags = UPF_BOOT_AUTOCONF, .type = PORT_IRDA, - .irqs = { 52, 53, 55, 54 }, + .irqs = { 52, 52, 52, 52 }, }, #endif { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 77eee481de47..335098b66e2f 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -1,7 +1,7 @@ /* * SH3 Setup code for SH7710, SH7712 * - * Copyright (C) 2006, 2007 Paul Mundt + * Copyright (C) 2006 - 2009 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public @@ -20,59 +20,40 @@ enum { /* interrupt sources */ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, - DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - DMAC_DEI4, DMAC_DEI5, - IPSEC, + DMAC1, SCIF0, SCIF1, DMAC2, IPSEC, EDMAC0, EDMAC1, EDMAC2, - SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI, - SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI, - TMU0, TMU1, TMU2, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, - REF, + SIOF0, SIOF1, - /* interrupt groups */ - RTC, DMAC1, SCIF0, SCIF1, DMAC2, SIOF0, SIOF1, + TMU0, TMU1, TMU2, + RTC, WDT, REF, }; static struct intc_vect vectors[] __initdata = { /* IRQ0->5 are handled in setup-sh3.c */ - INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), - INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), - INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), - INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), - INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920), - INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960), - INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0), + INTC_VECT(DMAC1, 0x800), INTC_VECT(DMAC1, 0x820), + INTC_VECT(DMAC1, 0x840), INTC_VECT(DMAC1, 0x860), + INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0), + INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0), + INTC_VECT(SCIF1, 0x900), INTC_VECT(SCIF1, 0x920), + INTC_VECT(SCIF1, 0x940), INTC_VECT(SCIF1, 0x960), + INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0), #ifdef CONFIG_CPU_SUBTYPE_SH7710 INTC_VECT(IPSEC, 0xbe0), #endif INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20), INTC_VECT(EDMAC2, 0xc40), - INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20), - INTC_VECT(SIOF0_RXI, 0xe40), INTC_VECT(SIOF0_CCI, 0xe60), - INTC_VECT(SIOF1_ERI, 0xe80), INTC_VECT(SIOF1_TXI, 0xea0), - INTC_VECT(SIOF1_RXI, 0xec0), INTC_VECT(SIOF1_CCI, 0xee0), + INTC_VECT(SIOF0, 0xe00), INTC_VECT(SIOF0, 0xe20), + INTC_VECT(SIOF0, 0xe40), INTC_VECT(SIOF0, 0xe60), + INTC_VECT(SIOF1, 0xe80), INTC_VECT(SIOF1, 0xea0), + INTC_VECT(SIOF1, 0xec0), INTC_VECT(SIOF1, 0xee0), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2, 0x440), - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), INTC_VECT(WDT, 0x560), INTC_VECT(REF, 0x580), }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(DMAC1, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(DMAC2, DMAC_DEI4, DMAC_DEI5), - INTC_GROUP(SIOF0, SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI), - INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } }, @@ -85,7 +66,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, NULL, NULL, prio_registers, NULL); static struct resource rtc_resources[] = { @@ -98,14 +79,6 @@ static struct resource rtc_resources[] = { .start = 20, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 22, - .flags = IORESOURCE_IRQ, - }, }; static struct sh_rtc_platform_info rtc_info = { @@ -127,12 +100,12 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xa4400000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 52, 53, 55, 54 }, + .irqs = { 52, 52, 52, 52 }, }, { .mapbase = 0xa4410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 56, 57, 59, 58 }, + .irqs = { 56, 56, 56, 56 }, }, { .flags = 0, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index f807a21b066c..003874a2fd2a 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -2,6 +2,7 @@ * SH7720 Setup * * Copyright (C) 2007 Markus Brunner, Mark Jonas + * Copyright (C) 2009 Paul Mundt * * Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c: * @@ -26,17 +27,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 20, .flags = IORESOURCE_IRQ, }, @@ -150,62 +141,49 @@ enum { UNUSED = 0, /* interrupt sources */ - TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI, - WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND, + TMU0, TMU1, TMU2, RTC, + WDT, REF_RCMI, SIM, IRQ0, IRQ1, IRQ2, IRQ3, USBF_SPD, TMU_SUNI, IRQ5, IRQ4, - DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL, - ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT, + DMAC1, LCDC, SSL, + ADC, DMAC2, USBFI, CMT, SCIF0, SCIF1, - PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC, - SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC, + PINT07, PINT815, TPU, IIC, + SIOF0, SIOF1, MMC, PCC, USBHI, AFEIF, H_UDI, - /* interrupt groups */ - TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC, }; static struct intc_vect vectors[] __initdata = { /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480), - INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0), - INTC_VECT(SIM_ERI, 0x4e0), INTC_VECT(SIM_RXI, 0x500), - INTC_VECT(SIM_TXI, 0x520), INTC_VECT(SIM_TEND, 0x540), + INTC_VECT(TMU2, 0x440), INTC_VECT(RTC, 0x480), + INTC_VECT(RTC, 0x4a0), INTC_VECT(RTC, 0x4c0), + INTC_VECT(SIM, 0x4e0), INTC_VECT(SIM, 0x500), + INTC_VECT(SIM, 0x520), INTC_VECT(SIM, 0x540), INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580), /* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0), - INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800), - INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840), - INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900), + INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1, 0x800), + INTC_VECT(DMAC1, 0x820), INTC_VECT(DMAC1, 0x840), + INTC_VECT(DMAC1, 0x860), INTC_VECT(LCDC, 0x900), #if defined(CONFIG_CPU_SUBTYPE_SH7720) INTC_VECT(SSL, 0x980), #endif - INTC_VECT(USBFI0, 0xa20), INTC_VECT(USBFI1, 0xa40), + INTC_VECT(USBFI, 0xa20), INTC_VECT(USBFI, 0xa40), INTC_VECT(USBHI, 0xa60), - INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0), + INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0), INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00), INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80), INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00), - INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU0, 0xd80), - INTC_VECT(TPU1, 0xda0), INTC_VECT(TPU2, 0xdc0), - INTC_VECT(TPU3, 0xde0), INTC_VECT(IIC, 0xe00), - INTC_VECT(MMCI0, 0xe80), INTC_VECT(MMCI1, 0xea0), - INTC_VECT(MMCI2, 0xec0), INTC_VECT(MMCI3, 0xee0), + INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU, 0xd80), + INTC_VECT(TPU, 0xda0), INTC_VECT(TPU, 0xdc0), + INTC_VECT(TPU, 0xde0), INTC_VECT(IIC, 0xe00), + INTC_VECT(MMC, 0xe80), INTC_VECT(MMC, 0xea0), + INTC_VECT(MMC, 0xec0), INTC_VECT(MMC, 0xee0), INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60), INTC_VECT(AFEIF, 0xfe0), }; -static struct intc_group groups[] __initdata = { - INTC_GROUP(TMU, TMU0, TMU1, TMU2), - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND), - INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3), - INTC_GROUP(USBFI, USBFI0, USBFI1), - INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5), - INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3), - INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, @@ -219,7 +197,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, NULL, NULL, prio_registers, NULL); void __init plat_irq_setup(void) diff --git a/arch/sh/kernel/cpu/sh3/swsusp.S b/arch/sh/kernel/cpu/sh3/swsusp.S new file mode 100644 index 000000000000..01145426a2b8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/swsusp.S @@ -0,0 +1,147 @@ +/* + * arch/sh/kernel/cpu/sh3/swsusp.S + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/sys.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/page.h> + +#define k0 r0 +#define k1 r1 +#define k2 r2 +#define k3 r3 +#define k4 r4 + +! swsusp_arch_resume() +! - copy restore_pblist pages +! - restore registers from swsusp_arch_regs_cpu0 + +ENTRY(swsusp_arch_resume) + mov.l 1f, r15 + mov.l 2f, r4 + mov.l @r4, r4 + +swsusp_copy_loop: + mov r4, r0 + cmp/eq #0, r0 + bt swsusp_restore_regs + + mov.l @(PBE_ADDRESS, r4), r2 + mov.l @(PBE_ORIG_ADDRESS, r4), r5 + + mov #(PAGE_SIZE >> 10), r3 + shll8 r3 + shlr2 r3 /* PAGE_SIZE / 16 */ +swsusp_copy_page: + dt r3 + mov.l @r2+,r1 /* 16n+0 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+4 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+8 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+12 */ + mov.l r1,@r5 + bf/s swsusp_copy_page + add #4,r5 + + bra swsusp_copy_loop + mov.l @(PBE_NEXT, r4), r4 + +swsusp_restore_regs: + ! BL=0: R7->R0 is bank0 + mov.l 3f, r8 + mov.l 4f, r5 + jsr @r5 + nop + + ! BL=1: R7->R0 is bank1 + lds k2, pr + ldc k3, ssr + + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + + rte + nop + ! BL=0: R7->R0 is bank0 + + .align 2 +1: .long swsusp_arch_regs_cpu0 +2: .long restore_pblist +3: .long 0x20000000 ! RB=1 +4: .long restore_regs + +! swsusp_arch_suspend() +! - prepare pc for resume, return from function without swsusp_save on resume +! - save registers in swsusp_arch_regs_cpu0 +! - call swsusp_save write suspend image + +ENTRY(swsusp_arch_suspend) + sts pr, r0 ! save pr in r0 + mov r15, r2 ! save sp in r2 + mov r8, r5 ! save r8 in r5 + stc sr, r1 + ldc r1, ssr ! save sr in ssr + mov.l 1f, r1 + ldc r1, spc ! setup pc value for resuming + mov.l 5f, r15 ! use swsusp_arch_regs_cpu0 as stack + mov.l 6f, r3 + add r3, r15 ! save from top of structure + + ! BL=0: R7->R0 is bank0 + mov.l 2f, r3 ! get new SR value for bank1 + mov #0, r4 + mov.l 7f, r1 + jsr @r1 ! switch to bank1 and save bank1 r7->r0 + not r4, r4 + + ! BL=1: R7->R0 is bank1 + stc r2_bank, k0 ! fetch old sp from r2_bank0 + mov.l 3f, k4 ! SR bits to clear in k4 + mov.l 8f, k1 + jsr @k1 ! switch to bank0 and save all regs + stc r0_bank, k3 ! fetch old pr from r0_bank0 + + ! BL=0: R7->R0 is bank0 + mov r2, r15 ! restore old sp + mov r5, r8 ! restore old r8 + stc ssr, r1 + ldc r1, sr ! restore old sr + lds r0, pr ! restore old pr + mov.l 4f, r0 + jmp @r0 + nop + +swsusp_call_save: + mov r2, r15 ! restore old sp + mov r5, r8 ! restore old r8 + lds r0, pr ! restore old pr + rts + mov #0, r0 + + .align 2 +1: .long swsusp_call_save +2: .long 0x20000000 ! RB=1 +3: .long 0xdfffffff ! RB=0 +4: .long swsusp_save +5: .long swsusp_arch_regs_cpu0 +6: .long SWSUSP_ARCH_REGS_SIZE +7: .long save_low_regs +8: .long save_regs diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index d608557c7a3f..203b18347b83 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -5,6 +5,7 @@ obj-y := probe.o common.o common-y += $(addprefix ../sh3/, entry.o ex.o) +obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o) obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 2e42572b1b11..3d3a3c4425a9 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -129,6 +129,13 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; + case 0x4004: + boot_cpu_data.type = CPU_SH7786; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + CPU_HAS_LLSC | CPU_HAS_PTEAEX; + break; case 0x3008: boot_cpu_data.icache.ways = 4; boot_cpu_data.dcache.ways = 4; diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index ec884039b914..a1c80d909cd6 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -21,17 +21,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 20, .flags = IORESOURCE_IRQ, }, @@ -50,13 +40,13 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, - .irqs = { 23, 24, 25, 0 }, + .irqs = { 23, 23, 23, 0 }, }, { #endif .mapbase = 0xffe80000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, + .irqs = { 40, 40, 40, 40 }, }, { .flags = 0, } @@ -87,43 +77,27 @@ enum { /* interrupt sources */ IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */ - HUDI, GPIOI, - DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, - DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7, - DMAC_DMAE, + HUDI, GPIOI, DMAC, PCIC0_PCISERR, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON, PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3, - TMU3, TMU4, TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, - RTC_ATI, RTC_PRI, RTC_CUI, - SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI, - SCIF_ERI, SCIF_RXI, SCIF_BRI, SCIF_TXI, - WDT, - REF_RCMI, REF_ROVI, + TMU3, TMU4, TMU0, TMU1, TMU2, RTC, SCI1, SCIF, WDT, REF, /* interrupt groups */ - DMAC, PCIC1, TMU2, RTC, SCI1, SCIF, REF, + PCIC1, }; static struct intc_vect vectors[] __initdata = { INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), - INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), - INTC_VECT(SCI1_ERI, 0x4e0), INTC_VECT(SCI1_RXI, 0x500), - INTC_VECT(SCI1_TXI, 0x520), INTC_VECT(SCI1_TEI, 0x540), - INTC_VECT(SCIF_ERI, 0x700), INTC_VECT(SCIF_RXI, 0x720), - INTC_VECT(SCIF_BRI, 0x740), INTC_VECT(SCIF_TXI, 0x760), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), + INTC_VECT(SCI1, 0x4e0), INTC_VECT(SCI1, 0x500), + INTC_VECT(SCI1, 0x520), INTC_VECT(SCI1, 0x540), + INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720), + INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760), INTC_VECT(WDT, 0x560), - INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0), -}; - -static struct intc_group groups[] __initdata = { - INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(SCI1, SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI), - INTC_GROUP(SCIF, SCIF_ERI, SCIF_RXI, SCIF_BRI, SCIF_TXI), - INTC_GROUP(REF, REF_RCMI, REF_ROVI), + INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0), }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -136,7 +110,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { PCIC1, PCIC0_PCISERR } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, +static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, NULL, NULL, prio_registers, NULL); /* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */ @@ -145,39 +119,28 @@ static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) static struct intc_vect vectors_dma4[] __initdata = { - INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), - INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), - INTC_VECT(DMAC_DMAE, 0x6c0), -}; - -static struct intc_group groups_dma4[] __initdata = { - INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, - DMAC_DMTE3, DMAC_DMAE), + INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660), + INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0), + INTC_VECT(DMAC, 0x6c0), }; static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4", - vectors_dma4, groups_dma4, + vectors_dma4, NULL, NULL, prio_registers, NULL); #endif /* SH7750R and SH7751R both have 8-channel DMA controllers */ #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R) static struct intc_vect vectors_dma8[] __initdata = { - INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), - INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), - INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0), - INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0), - INTC_VECT(DMAC_DMAE, 0x6c0), -}; - -static struct intc_group groups_dma8[] __initdata = { - INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, - DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5, - DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE), + INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660), + INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0), + INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0), + INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0), + INTC_VECT(DMAC, 0x6c0), }; static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8", - vectors_dma8, groups_dma8, + vectors_dma8, NULL, NULL, prio_registers, NULL); #endif diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 8e344ec5847e..1a92361feeb9 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763) += setup-sh7763.o obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o +obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o @@ -21,6 +22,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o +clock-$(CONFIG_CPU_SUBTYPE_SH7786) := clock-sh7786.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o @@ -31,6 +33,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o +pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o obj-y += $(clock-y) obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c new file mode 100644 index 000000000000..f84a9c134471 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c @@ -0,0 +1,148 @@ +/* + * arch/sh/kernel/cpu/sh4a/clock-sh7786.c + * + * SH7786 support for the clock framework + * + * Copyright (C) 2008, 2009 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Based on SH7785 + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int ifc_divisors[] = { 1, 2, 4, 1 }; +static int sfc_divisors[] = { 1, 1, 4, 1 }; +static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 1, + 24, 32, 1, 1, 1, 1, 1, 1 }; +static int mfc_divisors[] = { 1, 1, 4, 1 }; +static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 16, 1, + 24, 32, 1, 48, 1, 1, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f]; +} + +static struct clk_ops sh7786_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(FRQMR1) & 0x000f); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7786_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops sh7786_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7786_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7786_clk_ops[] = { + &sh7786_master_clk_ops, + &sh7786_module_clk_ops, + &sh7786_bus_clk_ops, + &sh7786_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7786_clk_ops)) + *ops = sh7786_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003); + clk->rate = clk->parent->rate / sfc_divisors[idx]; +} + +static struct clk_ops sh7786_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk sh7786_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7786_shyway_clk_ops, +}; + +static void ddr_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003); + clk->rate = clk->parent->rate / mfc_divisors[idx]; +} + +static struct clk_ops sh7786_ddr_clk_ops = { + .recalc = ddr_clk_recalc, +}; + +static struct clk sh7786_ddr_clk = { + .name = "ddr_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7786_ddr_clk_ops, +}; + +/* + * Additional SH7786-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *sh7786_onchip_clocks[] = { + &sh7786_shyway_clk, + &sh7786_ddr_clk, +}; + +static int __init sh7786_clk_init(void) +{ + struct clk *clk = clk_get(NULL, "master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(sh7786_onchip_clocks); i++) { + struct clk *clkp = sh7786_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} +arch_initcall(sh7786_clk_init); diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c new file mode 100644 index 000000000000..373b3447bfdf --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c @@ -0,0 +1,950 @@ +/* + * SH7786 Pinmux + * + * Copyright (C) 2008, 2009 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Based on SH7785 pinmux + * + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <cpu/sh7786.h> + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA, + PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA, + PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA, + PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA, + PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA, + PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA, + PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA, + PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA, + PE7_DATA, PE6_DATA, + PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA, + PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA, + PG7_DATA, PG6_DATA, PG5_DATA, + PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA, + PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA, + PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA, + PJ3_DATA, PJ2_DATA, PJ1_DATA, + PINMUX_DATA_END, + + PINMUX_INPUT_BEGIN, + PA7_IN, PA6_IN, PA5_IN, PA4_IN, + PA3_IN, PA2_IN, PA1_IN, PA0_IN, + PB7_IN, PB6_IN, PB5_IN, PB4_IN, + PB3_IN, PB2_IN, PB1_IN, PB0_IN, + PC7_IN, PC6_IN, PC5_IN, PC4_IN, + PC3_IN, PC2_IN, PC1_IN, PC0_IN, + PD7_IN, PD6_IN, PD5_IN, PD4_IN, + PD3_IN, PD2_IN, PD1_IN, PD0_IN, + PE7_IN, PE6_IN, + PF7_IN, PF6_IN, PF5_IN, PF4_IN, + PF3_IN, PF2_IN, PF1_IN, PF0_IN, + PG7_IN, PG6_IN, PG5_IN, + PH7_IN, PH6_IN, PH5_IN, PH4_IN, + PH3_IN, PH2_IN, PH1_IN, PH0_IN, + PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN, + PJ3_IN, PJ2_IN, PJ1_IN, + PINMUX_INPUT_END, + + PINMUX_INPUT_PULLUP_BEGIN, + PA7_IN_PU, PA6_IN_PU, PA5_IN_PU, PA4_IN_PU, + PA3_IN_PU, PA2_IN_PU, PA1_IN_PU, PA0_IN_PU, + PB7_IN_PU, PB6_IN_PU, PB5_IN_PU, PB4_IN_PU, + PB3_IN_PU, PB2_IN_PU, PB1_IN_PU, PB0_IN_PU, + PC7_IN_PU, PC6_IN_PU, PC5_IN_PU, PC4_IN_PU, + PC3_IN_PU, PC2_IN_PU, PC1_IN_PU, PC0_IN_PU, + PD7_IN_PU, PD6_IN_PU, PD5_IN_PU, PD4_IN_PU, + PD3_IN_PU, PD2_IN_PU, PD1_IN_PU, PD0_IN_PU, + PE7_IN_PU, PE6_IN_PU, + PF7_IN_PU, PF6_IN_PU, PF5_IN_PU, PF4_IN_PU, + PF3_IN_PU, PF2_IN_PU, PF1_IN_PU, PF0_IN_PU, + PG7_IN_PU, PG6_IN_PU, PG5_IN_PU, + PH7_IN_PU, PH6_IN_PU, PH5_IN_PU, PH4_IN_PU, + PH3_IN_PU, PH2_IN_PU, PH1_IN_PU, PH0_IN_PU, + PJ7_IN_PU, PJ6_IN_PU, PJ5_IN_PU, PJ4_IN_PU, + PJ3_IN_PU, PJ2_IN_PU, PJ1_IN_PU, + PINMUX_INPUT_PULLUP_END, + + PINMUX_OUTPUT_BEGIN, + PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT, + PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT, + PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT, + PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT, + PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT, + PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT, + PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT, + PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT, + PE7_OUT, PE6_OUT, + PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT, + PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT, + PG7_OUT, PG6_OUT, PG5_OUT, + PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT, + PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT, + PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT, + PJ3_OUT, PJ2_OUT, PJ1_OUT, + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PA7_FN, PA6_FN, PA5_FN, PA4_FN, + PA3_FN, PA2_FN, PA1_FN, PA0_FN, + PB7_FN, PB6_FN, PB5_FN, PB4_FN, + PB3_FN, PB2_FN, PB1_FN, PB0_FN, + PC7_FN, PC6_FN, PC5_FN, PC4_FN, + PC3_FN, PC2_FN, PC1_FN, PC0_FN, + PD7_FN, PD6_FN, PD5_FN, PD4_FN, + PD3_FN, PD2_FN, PD1_FN, PD0_FN, + PE7_FN, PE6_FN, + PF7_FN, PF6_FN, PF5_FN, PF4_FN, + PF3_FN, PF2_FN, PF1_FN, PF0_FN, + PG7_FN, PG6_FN, PG5_FN, + PH7_FN, PH6_FN, PH5_FN, PH4_FN, + PH3_FN, PH2_FN, PH1_FN, PH0_FN, + PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN, + PJ3_FN, PJ2_FN, PJ1_FN, + P1MSEL14_0, P1MSEL14_1, + P1MSEL13_0, P1MSEL13_1, + P1MSEL12_0, P1MSEL12_1, + P1MSEL11_0, P1MSEL11_1, + P1MSEL10_0, P1MSEL10_1, + P1MSEL9_0, P1MSEL9_1, + P1MSEL8_0, P1MSEL8_1, + P1MSEL7_0, P1MSEL7_1, + P1MSEL6_0, P1MSEL6_1, + P1MSEL5_0, P1MSEL5_1, + P1MSEL4_0, P1MSEL4_1, + P1MSEL3_0, P1MSEL3_1, + P1MSEL2_0, P1MSEL2_1, + P1MSEL1_0, P1MSEL1_1, + P1MSEL0_0, P1MSEL0_1, + + P2MSEL15_0, P2MSEL15_1, + P2MSEL14_0, P2MSEL14_1, + P2MSEL13_0, P2MSEL13_1, + P2MSEL12_0, P2MSEL12_1, + P2MSEL11_0, P2MSEL11_1, + P2MSEL10_0, P2MSEL10_1, + P2MSEL9_0, P2MSEL9_1, + P2MSEL8_0, P2MSEL8_1, + P2MSEL7_0, P2MSEL7_1, + P2MSEL6_0, P2MSEL6_1, + P2MSEL5_0, P2MSEL5_1, + P2MSEL4_0, P2MSEL4_1, + P2MSEL3_0, P2MSEL3_1, + P2MSEL2_0, P2MSEL2_1, + P2MSEL1_0, P2MSEL1_1, + P2MSEL0_0, P2MSEL0_1, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + CDE_MARK, + ETH_MAGIC_MARK, + DISP_MARK, + ETH_LINK_MARK, + DR5_MARK, + ETH_TX_ER_MARK, + DR4_MARK, + ETH_TX_EN_MARK, + DR3_MARK, + ETH_TXD3_MARK, + DR2_MARK, + ETH_TXD2_MARK, + DR1_MARK, + ETH_TXD1_MARK, + DR0_MARK, + ETH_TXD0_MARK, + + VSYNC_MARK, + HSPI_CLK_MARK, + ODDF_MARK, + HSPI_CS_MARK, + DG5_MARK, + ETH_MDIO_MARK, + DG4_MARK, + ETH_RX_CLK_MARK, + DG3_MARK, + ETH_MDC_MARK, + DG2_MARK, + ETH_COL_MARK, + DG1_MARK, + ETH_TX_CLK_MARK, + DG0_MARK, + ETH_CRS_MARK, + + DCLKIN_MARK, + HSPI_RX_MARK, + HSYNC_MARK, + HSPI_TX_MARK, + DB5_MARK, + ETH_RXD3_MARK, + DB4_MARK, + ETH_RXD2_MARK, + DB3_MARK, + ETH_RXD1_MARK, + DB2_MARK, + ETH_RXD0_MARK, + DB1_MARK, + ETH_RX_DV_MARK, + DB0_MARK, + ETH_RX_ER_MARK, + + DCLKOUT_MARK, + SCIF1_SLK_MARK, + SCIF1_RXD_MARK, + SCIF1_TXD_MARK, + DACK1_MARK, + BACK_MARK, + FALE_MARK, + DACK0_MARK, + FCLE_MARK, + DREQ1_MARK, + BREQ_MARK, + USB_OVC1_MARK, + DREQ0_MARK, + USB_OVC0_MARK, + + USB_PENC1_MARK, + USB_PENC0_MARK, + + HAC1_SDOUT_MARK, + SSI1_SDATA_MARK, + SDIF1CMD_MARK, + HAC1_SDIN_MARK, + SSI1_SCK_MARK, + SDIF1CD_MARK, + HAC1_SYNC_MARK, + SSI1_WS_MARK, + SDIF1WP_MARK, + HAC1_BITCLK_MARK, + SSI1_CLK_MARK, + SDIF1CLK_MARK, + HAC0_SDOUT_MARK, + SSI0_SDATA_MARK, + SDIF1D3_MARK, + HAC0_SDIN_MARK, + SSI0_SCK_MARK, + SDIF1D2_MARK, + HAC0_SYNC_MARK, + SSI0_WS_MARK, + SDIF1D1_MARK, + HAC0_BITCLK_MARK, + SSI0_CLK_MARK, + SDIF1D0_MARK, + + SCIF3_SCK_MARK, + SSI2_SDATA_MARK, + SCIF3_RXD_MARK, + TCLK_MARK, + SSI2_SCK_MARK, + SCIF3_TXD_MARK, + HAC_RES_MARK, + SSI2_WS_MARK, + + DACK3_MARK, + SDIF0CMD_MARK, + DACK2_MARK, + SDIF0CD_MARK, + DREQ3_MARK, + SDIF0WP_MARK, + SCIF0_CTS_MARK, + DREQ2_MARK, + SDIF0CLK_MARK, + SCIF0_RTS_MARK, + IRL7_MARK, + SDIF0D3_MARK, + SCIF0_SCK_MARK, + IRL6_MARK, + SDIF0D2_MARK, + SCIF0_RXD_MARK, + IRL5_MARK, + SDIF0D1_MARK, + SCIF0_TXD_MARK, + IRL4_MARK, + SDIF0D0_MARK, + + SCIF5_SCK_MARK, + FRB_MARK, + SCIF5_RXD_MARK, + IOIS16_MARK, + SCIF5_TXD_MARK, + CE2B_MARK, + DRAK3_MARK, + CE2A_MARK, + SCIF4_SCK_MARK, + DRAK2_MARK, + SSI3_WS_MARK, + SCIF4_RXD_MARK, + DRAK1_MARK, + SSI3_SDATA_MARK, + FSTATUS_MARK, + SCIF4_TXD_MARK, + DRAK0_MARK, + SSI3_SCK_MARK, + FSE_MARK, + PINMUX_MARK_END, +}; + +static pinmux_enum_t pinmux_data[] = { + + /* PA GPIO */ + PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT, PA7_IN_PU), + PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT, PA6_IN_PU), + PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT, PA5_IN_PU), + PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT, PA4_IN_PU), + PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT, PA3_IN_PU), + PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT, PA2_IN_PU), + PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT, PA1_IN_PU), + PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT, PA0_IN_PU), + + /* PB GPIO */ + PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT, PB7_IN_PU), + PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT, PB6_IN_PU), + PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT, PB5_IN_PU), + PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT, PB4_IN_PU), + PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT, PB3_IN_PU), + PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT, PB2_IN_PU), + PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT, PB1_IN_PU), + PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT, PB0_IN_PU), + + /* PC GPIO */ + PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT, PC7_IN_PU), + PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT, PC6_IN_PU), + PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT, PC5_IN_PU), + PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT, PC4_IN_PU), + PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT, PC3_IN_PU), + PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT, PC2_IN_PU), + PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT, PC1_IN_PU), + PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT, PC0_IN_PU), + + /* PD GPIO */ + PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT, PD7_IN_PU), + PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT, PD6_IN_PU), + PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT, PD5_IN_PU), + PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT, PD4_IN_PU), + PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT, PD3_IN_PU), + PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT, PD2_IN_PU), + PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT, PD1_IN_PU), + PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT, PD0_IN_PU), + + /* PE GPIO */ + PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT, PE7_IN_PU), + PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT, PE6_IN_PU), + + /* PF GPIO */ + PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT, PF7_IN_PU), + PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT, PF6_IN_PU), + PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT, PF5_IN_PU), + PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT, PF4_IN_PU), + PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT, PF3_IN_PU), + PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT, PF2_IN_PU), + PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT, PF1_IN_PU), + PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT, PF0_IN_PU), + + /* PG GPIO */ + PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT, PG7_IN_PU), + PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT, PG6_IN_PU), + PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT, PG5_IN_PU), + + /* PH GPIO */ + PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT, PH7_IN_PU), + PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT, PH6_IN_PU), + PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT, PH5_IN_PU), + PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT, PH4_IN_PU), + PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT, PH3_IN_PU), + PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT, PH2_IN_PU), + PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT, PH1_IN_PU), + PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT, PH0_IN_PU), + + /* PJ GPIO */ + PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT, PJ7_IN_PU), + PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT, PJ6_IN_PU), + PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT, PJ5_IN_PU), + PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT, PJ4_IN_PU), + PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT, PJ3_IN_PU), + PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT, PJ2_IN_PU), + PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT, PJ1_IN_PU), + + /* PA FN */ + PINMUX_MARK_BEGIN, + PINMUX_DATA(CDE_MARK, P1MSEL2_0, PA7_FN), + PINMUX_DATA(DISP_MARK, P1MSEL2_0, PA6_FN), + PINMUX_DATA(DR5_MARK, P1MSEL2_0, PA5_FN), + PINMUX_DATA(DR4_MARK, P1MSEL2_0, PA4_FN), + PINMUX_DATA(DR3_MARK, P1MSEL2_0, PA3_FN), + PINMUX_DATA(DR2_MARK, P1MSEL2_0, PA2_FN), + PINMUX_DATA(DR1_MARK, P1MSEL2_0, PA1_FN), + PINMUX_DATA(DR0_MARK, P1MSEL2_0, PA0_FN), + PINMUX_DATA(ETH_MAGIC_MARK, P1MSEL2_1, PA7_FN), + PINMUX_DATA(ETH_LINK_MARK, P1MSEL2_1, PA6_FN), + PINMUX_DATA(ETH_TX_ER_MARK, P1MSEL2_1, PA5_FN), + PINMUX_DATA(ETH_TX_EN_MARK, P1MSEL2_1, PA4_FN), + PINMUX_DATA(ETH_TXD3_MARK, P1MSEL2_1, PA3_FN), + PINMUX_DATA(ETH_TXD2_MARK, P1MSEL2_1, PA2_FN), + PINMUX_DATA(ETH_TXD1_MARK, P1MSEL2_1, PA1_FN), + PINMUX_DATA(ETH_TXD0_MARK, P1MSEL2_1, PA0_FN), + + /* PB FN */ + PINMUX_DATA(VSYNC_MARK, P1MSEL3_0, PB7_FN), + PINMUX_DATA(ODDF_MARK, P1MSEL3_0, PB6_FN), + PINMUX_DATA(DG5_MARK, P1MSEL2_0, PB5_FN), + PINMUX_DATA(DG4_MARK, P1MSEL2_0, PB4_FN), + PINMUX_DATA(DG3_MARK, P1MSEL2_0, PB3_FN), + PINMUX_DATA(DG2_MARK, P1MSEL2_0, PB2_FN), + PINMUX_DATA(DG1_MARK, P1MSEL2_0, PB1_FN), + PINMUX_DATA(DG0_MARK, P1MSEL2_0, PB0_FN), + PINMUX_DATA(HSPI_CLK_MARK, P1MSEL3_1, PB7_FN), + PINMUX_DATA(HSPI_CS_MARK, P1MSEL3_1, PB6_FN), + PINMUX_DATA(ETH_MDIO_MARK, P1MSEL2_1, PB5_FN), + PINMUX_DATA(ETH_RX_CLK_MARK, P1MSEL2_1, PB4_FN), + PINMUX_DATA(ETH_MDC_MARK, P1MSEL2_1, PB3_FN), + PINMUX_DATA(ETH_COL_MARK, P1MSEL2_1, PB2_FN), + PINMUX_DATA(ETH_TX_CLK_MARK, P1MSEL2_1, PB1_FN), + PINMUX_DATA(ETH_CRS_MARK, P1MSEL2_1, PB0_FN), + + /* PC FN */ + PINMUX_DATA(DCLKIN_MARK, P1MSEL3_0, PC7_FN), + PINMUX_DATA(HSYNC_MARK, P1MSEL3_0, PC6_FN), + PINMUX_DATA(DB5_MARK, P1MSEL2_0, PC5_FN), + PINMUX_DATA(DB4_MARK, P1MSEL2_0, PC4_FN), + PINMUX_DATA(DB3_MARK, P1MSEL2_0, PC3_FN), + PINMUX_DATA(DB2_MARK, P1MSEL2_0, PC2_FN), + PINMUX_DATA(DB1_MARK, P1MSEL2_0, PC1_FN), + PINMUX_DATA(DB0_MARK, P1MSEL2_0, PC0_FN), + + PINMUX_DATA(HSPI_RX_MARK, P1MSEL3_1, PC7_FN), + PINMUX_DATA(HSPI_TX_MARK, P1MSEL3_1, PC6_FN), + PINMUX_DATA(ETH_RXD3_MARK, P1MSEL2_1, PC5_FN), + PINMUX_DATA(ETH_RXD2_MARK, P1MSEL2_1, PC4_FN), + PINMUX_DATA(ETH_RXD1_MARK, P1MSEL2_1, PC3_FN), + PINMUX_DATA(ETH_RXD0_MARK, P1MSEL2_1, PC2_FN), + PINMUX_DATA(ETH_RX_DV_MARK, P1MSEL2_1, PC1_FN), + PINMUX_DATA(ETH_RX_ER_MARK, P1MSEL2_1, PC0_FN), + + /* PD FN */ + PINMUX_DATA(DCLKOUT_MARK, PD7_FN), + PINMUX_DATA(SCIF1_SLK_MARK, PD6_FN), + PINMUX_DATA(SCIF1_RXD_MARK, PD5_FN), + PINMUX_DATA(SCIF1_TXD_MARK, PD4_FN), + PINMUX_DATA(DACK1_MARK, P1MSEL13_1, P1MSEL12_0, PD3_FN), + PINMUX_DATA(BACK_MARK, P1MSEL13_0, P1MSEL12_1, PD3_FN), + PINMUX_DATA(FALE_MARK, P1MSEL13_0, P1MSEL12_0, PD3_FN), + PINMUX_DATA(DACK0_MARK, P1MSEL14_1, PD2_FN), + PINMUX_DATA(FCLE_MARK, P1MSEL14_0, PD2_FN), + PINMUX_DATA(DREQ1_MARK, P1MSEL10_0, P1MSEL9_1, PD1_FN), + PINMUX_DATA(BREQ_MARK, P1MSEL10_1, P1MSEL9_0, PD1_FN), + PINMUX_DATA(USB_OVC1_MARK, P1MSEL10_0, P1MSEL9_0, PD1_FN), + PINMUX_DATA(DREQ0_MARK, P1MSEL11_1, PD0_FN), + PINMUX_DATA(USB_OVC0_MARK, P1MSEL11_0, PD0_FN), + + /* PE FN */ + PINMUX_DATA(USB_PENC1_MARK, PE7_FN), + PINMUX_DATA(USB_PENC0_MARK, PE6_FN), + + /* PF FN */ + PINMUX_DATA(HAC1_SDOUT_MARK, P2MSEL15_0, P2MSEL14_0, PF7_FN), + PINMUX_DATA(HAC1_SDIN_MARK, P2MSEL15_0, P2MSEL14_0, PF6_FN), + PINMUX_DATA(HAC1_SYNC_MARK, P2MSEL15_0, P2MSEL14_0, PF5_FN), + PINMUX_DATA(HAC1_BITCLK_MARK, P2MSEL15_0, P2MSEL14_0, PF4_FN), + PINMUX_DATA(HAC0_SDOUT_MARK, P2MSEL13_0, P2MSEL12_0, PF3_FN), + PINMUX_DATA(HAC0_SDIN_MARK, P2MSEL13_0, P2MSEL12_0, PF2_FN), + PINMUX_DATA(HAC0_SYNC_MARK, P2MSEL13_0, P2MSEL12_0, PF1_FN), + PINMUX_DATA(HAC0_BITCLK_MARK, P2MSEL13_0, P2MSEL12_0, PF0_FN), + PINMUX_DATA(SSI1_SDATA_MARK, P2MSEL15_0, P2MSEL14_1, PF7_FN), + PINMUX_DATA(SSI1_SCK_MARK, P2MSEL15_0, P2MSEL14_1, PF6_FN), + PINMUX_DATA(SSI1_WS_MARK, P2MSEL15_0, P2MSEL14_1, PF5_FN), + PINMUX_DATA(SSI1_CLK_MARK, P2MSEL15_0, P2MSEL14_1, PF4_FN), + PINMUX_DATA(SSI0_SDATA_MARK, P2MSEL13_0, P2MSEL12_1, PF3_FN), + PINMUX_DATA(SSI0_SCK_MARK, P2MSEL13_0, P2MSEL12_1, PF2_FN), + PINMUX_DATA(SSI0_WS_MARK, P2MSEL13_0, P2MSEL12_1, PF1_FN), + PINMUX_DATA(SSI0_CLK_MARK, P2MSEL13_0, P2MSEL12_1, PF0_FN), + PINMUX_DATA(SDIF1CMD_MARK, P2MSEL15_1, P2MSEL14_0, PF7_FN), + PINMUX_DATA(SDIF1CD_MARK, P2MSEL15_1, P2MSEL14_0, PF6_FN), + PINMUX_DATA(SDIF1WP_MARK, P2MSEL15_1, P2MSEL14_0, PF5_FN), + PINMUX_DATA(SDIF1CLK_MARK, P2MSEL15_1, P2MSEL14_0, PF4_FN), + PINMUX_DATA(SDIF1D3_MARK, P2MSEL13_1, P2MSEL12_0, PF3_FN), + PINMUX_DATA(SDIF1D2_MARK, P2MSEL13_1, P2MSEL12_0, PF2_FN), + PINMUX_DATA(SDIF1D1_MARK, P2MSEL13_1, P2MSEL12_0, PF1_FN), + PINMUX_DATA(SDIF1D0_MARK, P2MSEL13_1, P2MSEL12_0, PF0_FN), + + /* PG FN */ + PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL8_0, PG7_FN), + PINMUX_DATA(SSI2_SDATA_MARK, P1MSEL8_1, PG7_FN), + PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL7_0, P1MSEL6_0, PG6_FN), + PINMUX_DATA(SSI2_SCK_MARK, P1MSEL7_1, P1MSEL6_0, PG6_FN), + PINMUX_DATA(TCLK_MARK, P1MSEL7_0, P1MSEL6_1, PG6_FN), + PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL5_0, P1MSEL4_0, PG5_FN), + PINMUX_DATA(SSI2_WS_MARK, P1MSEL5_1, P1MSEL4_0, PG5_FN), + PINMUX_DATA(HAC_RES_MARK, P1MSEL5_0, P1MSEL4_1, PG5_FN), + + /* PH FN */ + PINMUX_DATA(DACK3_MARK, P2MSEL4_0, PH7_FN), + PINMUX_DATA(SDIF0CMD_MARK, P2MSEL4_1, PH7_FN), + PINMUX_DATA(DACK2_MARK, P2MSEL4_0, PH6_FN), + PINMUX_DATA(SDIF0CD_MARK, P2MSEL4_1, PH6_FN), + PINMUX_DATA(DREQ3_MARK, P2MSEL4_0, PH5_FN), + PINMUX_DATA(SDIF0WP_MARK, P2MSEL4_1, PH5_FN), + PINMUX_DATA(DREQ2_MARK, P2MSEL3_0, P2MSEL2_1, PH4_FN), + PINMUX_DATA(SDIF0CLK_MARK, P2MSEL3_1, P2MSEL2_0, PH4_FN), + PINMUX_DATA(SCIF0_CTS_MARK, P2MSEL3_0, P2MSEL2_0, PH4_FN), + PINMUX_DATA(SDIF0D3_MARK, P2MSEL1_1, P2MSEL0_0, PH3_FN), + PINMUX_DATA(SCIF0_RTS_MARK, P2MSEL1_0, P2MSEL0_0, PH3_FN), + PINMUX_DATA(IRL7_MARK, P2MSEL1_0, P2MSEL0_1, PH3_FN), + PINMUX_DATA(SDIF0D2_MARK, P2MSEL1_1, P2MSEL0_0, PH2_FN), + PINMUX_DATA(SCIF0_SCK_MARK, P2MSEL1_0, P2MSEL0_0, PH2_FN), + PINMUX_DATA(IRL6_MARK, P2MSEL1_0, P2MSEL0_1, PH2_FN), + PINMUX_DATA(SDIF0D1_MARK, P2MSEL1_1, P2MSEL0_0, PH1_FN), + PINMUX_DATA(SCIF0_RXD_MARK, P2MSEL1_0, P2MSEL0_0, PH1_FN), + PINMUX_DATA(IRL5_MARK, P2MSEL1_0, P2MSEL0_1, PH1_FN), + PINMUX_DATA(SDIF0D0_MARK, P2MSEL1_1, P2MSEL0_0, PH0_FN), + PINMUX_DATA(SCIF0_TXD_MARK, P2MSEL1_0, P2MSEL0_0, PH0_FN), + PINMUX_DATA(IRL4_MARK, P2MSEL1_0, P2MSEL0_1, PH0_FN), + + /* PJ FN */ + PINMUX_DATA(SCIF5_SCK_MARK, P2MSEL11_1, PJ7_FN), + PINMUX_DATA(FRB_MARK, P2MSEL11_0, PJ7_FN), + PINMUX_DATA(SCIF5_RXD_MARK, P2MSEL10_0, PJ6_FN), + PINMUX_DATA(IOIS16_MARK, P2MSEL10_1, PJ6_FN), + PINMUX_DATA(SCIF5_TXD_MARK, P2MSEL10_0, PJ5_FN), + PINMUX_DATA(CE2B_MARK, P2MSEL10_1, PJ5_FN), + PINMUX_DATA(DRAK3_MARK, P2MSEL7_0, PJ4_FN), + PINMUX_DATA(CE2A_MARK, P2MSEL7_1, PJ4_FN), + PINMUX_DATA(SCIF4_SCK_MARK, P2MSEL9_0, P2MSEL8_0, PJ3_FN), + PINMUX_DATA(DRAK2_MARK, P2MSEL9_0, P2MSEL8_1, PJ3_FN), + PINMUX_DATA(SSI3_WS_MARK, P2MSEL9_1, P2MSEL8_0, PJ3_FN), + PINMUX_DATA(SCIF4_RXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ2_FN), + PINMUX_DATA(DRAK1_MARK, P2MSEL6_0, P2MSEL5_1, PJ2_FN), + PINMUX_DATA(FSTATUS_MARK, P2MSEL6_0, P2MSEL5_0, PJ2_FN), + PINMUX_DATA(SSI3_SDATA_MARK, P2MSEL6_1, P2MSEL5_1, PJ2_FN), + PINMUX_DATA(SCIF4_TXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ1_FN), + PINMUX_DATA(DRAK0_MARK, P2MSEL6_0, P2MSEL5_1, PJ1_FN), + PINMUX_DATA(FSE_MARK, P2MSEL6_0, P2MSEL5_0, PJ1_FN), + PINMUX_DATA(SSI3_SCK_MARK, P2MSEL6_1, P2MSEL5_1, PJ1_FN), +}; + +static struct pinmux_gpio pinmux_gpios[] = { + /* PA */ + PINMUX_GPIO(GPIO_PA7, PA7_DATA), + PINMUX_GPIO(GPIO_PA6, PA6_DATA), + PINMUX_GPIO(GPIO_PA5, PA5_DATA), + PINMUX_GPIO(GPIO_PA4, PA4_DATA), + PINMUX_GPIO(GPIO_PA3, PA3_DATA), + PINMUX_GPIO(GPIO_PA2, PA2_DATA), + PINMUX_GPIO(GPIO_PA1, PA1_DATA), + PINMUX_GPIO(GPIO_PA0, PA0_DATA), + + /* PB */ + PINMUX_GPIO(GPIO_PB7, PB7_DATA), + PINMUX_GPIO(GPIO_PB6, PB6_DATA), + PINMUX_GPIO(GPIO_PB5, PB5_DATA), + PINMUX_GPIO(GPIO_PB4, PB4_DATA), + PINMUX_GPIO(GPIO_PB3, PB3_DATA), + PINMUX_GPIO(GPIO_PB2, PB2_DATA), + PINMUX_GPIO(GPIO_PB1, PB1_DATA), + PINMUX_GPIO(GPIO_PB0, PB0_DATA), + + /* PC */ + PINMUX_GPIO(GPIO_PC7, PC7_DATA), + PINMUX_GPIO(GPIO_PC6, PC6_DATA), + PINMUX_GPIO(GPIO_PC5, PC5_DATA), + PINMUX_GPIO(GPIO_PC4, PC4_DATA), + PINMUX_GPIO(GPIO_PC3, PC3_DATA), + PINMUX_GPIO(GPIO_PC2, PC2_DATA), + PINMUX_GPIO(GPIO_PC1, PC1_DATA), + PINMUX_GPIO(GPIO_PC0, PC0_DATA), + + /* PD */ + PINMUX_GPIO(GPIO_PD7, PD7_DATA), + PINMUX_GPIO(GPIO_PD6, PD6_DATA), + PINMUX_GPIO(GPIO_PD5, PD5_DATA), + PINMUX_GPIO(GPIO_PD4, PD4_DATA), + PINMUX_GPIO(GPIO_PD3, PD3_DATA), + PINMUX_GPIO(GPIO_PD2, PD2_DATA), + PINMUX_GPIO(GPIO_PD1, PD1_DATA), + PINMUX_GPIO(GPIO_PD0, PD0_DATA), + + /* PE */ + PINMUX_GPIO(GPIO_PE5, PE7_DATA), + PINMUX_GPIO(GPIO_PE4, PE6_DATA), + + /* PF */ + PINMUX_GPIO(GPIO_PF7, PF7_DATA), + PINMUX_GPIO(GPIO_PF6, PF6_DATA), + PINMUX_GPIO(GPIO_PF5, PF5_DATA), + PINMUX_GPIO(GPIO_PF4, PF4_DATA), + PINMUX_GPIO(GPIO_PF3, PF3_DATA), + PINMUX_GPIO(GPIO_PF2, PF2_DATA), + PINMUX_GPIO(GPIO_PF1, PF1_DATA), + PINMUX_GPIO(GPIO_PF0, PF0_DATA), + + /* PG */ + PINMUX_GPIO(GPIO_PG7, PG7_DATA), + PINMUX_GPIO(GPIO_PG6, PG6_DATA), + PINMUX_GPIO(GPIO_PG5, PG5_DATA), + + /* PH */ + PINMUX_GPIO(GPIO_PH7, PH7_DATA), + PINMUX_GPIO(GPIO_PH6, PH6_DATA), + PINMUX_GPIO(GPIO_PH5, PH5_DATA), + PINMUX_GPIO(GPIO_PH4, PH4_DATA), + PINMUX_GPIO(GPIO_PH3, PH3_DATA), + PINMUX_GPIO(GPIO_PH2, PH2_DATA), + PINMUX_GPIO(GPIO_PH1, PH1_DATA), + PINMUX_GPIO(GPIO_PH0, PH0_DATA), + + /* PJ */ + PINMUX_GPIO(GPIO_PJ7, PJ7_DATA), + PINMUX_GPIO(GPIO_PJ6, PJ6_DATA), + PINMUX_GPIO(GPIO_PJ5, PJ5_DATA), + PINMUX_GPIO(GPIO_PJ4, PJ4_DATA), + PINMUX_GPIO(GPIO_PJ3, PJ3_DATA), + PINMUX_GPIO(GPIO_PJ2, PJ2_DATA), + PINMUX_GPIO(GPIO_PJ1, PJ1_DATA), + + /* FN */ + PINMUX_GPIO(GPIO_FN_CDE, CDE_MARK), + PINMUX_GPIO(GPIO_FN_ETH_MAGIC, ETH_MAGIC_MARK), + PINMUX_GPIO(GPIO_FN_DISP, DISP_MARK), + PINMUX_GPIO(GPIO_FN_ETH_LINK, ETH_LINK_MARK), + PINMUX_GPIO(GPIO_FN_DR5, DR5_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TX_ER, ETH_TX_ER_MARK), + PINMUX_GPIO(GPIO_FN_DR4, DR4_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TX_EN, ETH_TX_EN_MARK), + PINMUX_GPIO(GPIO_FN_DR3, DR3_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TXD3, ETH_TXD3_MARK), + PINMUX_GPIO(GPIO_FN_DR2, DR2_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TXD2, ETH_TXD2_MARK), + PINMUX_GPIO(GPIO_FN_DR1, DR1_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TXD1, ETH_TXD1_MARK), + PINMUX_GPIO(GPIO_FN_DR0, DR0_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TXD0, ETH_TXD0_MARK), + PINMUX_GPIO(GPIO_FN_VSYNC, VSYNC_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_CLK, HSPI_CLK_MARK), + PINMUX_GPIO(GPIO_FN_ODDF, ODDF_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_CS, HSPI_CS_MARK), + PINMUX_GPIO(GPIO_FN_DG5, DG5_MARK), + PINMUX_GPIO(GPIO_FN_ETH_MDIO, ETH_MDIO_MARK), + PINMUX_GPIO(GPIO_FN_DG4, DG4_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RX_CLK, ETH_RX_CLK_MARK), + PINMUX_GPIO(GPIO_FN_DG3, DG3_MARK), + PINMUX_GPIO(GPIO_FN_ETH_MDC, ETH_MDC_MARK), + PINMUX_GPIO(GPIO_FN_DG2, DG2_MARK), + PINMUX_GPIO(GPIO_FN_ETH_COL, ETH_COL_MARK), + PINMUX_GPIO(GPIO_FN_DG1, DG1_MARK), + PINMUX_GPIO(GPIO_FN_ETH_TX_CLK, ETH_TX_CLK_MARK), + PINMUX_GPIO(GPIO_FN_DG0, DG0_MARK), + PINMUX_GPIO(GPIO_FN_ETH_CRS, ETH_CRS_MARK), + PINMUX_GPIO(GPIO_FN_DCLKIN, DCLKIN_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_RX, HSPI_RX_MARK), + PINMUX_GPIO(GPIO_FN_HSYNC, HSYNC_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_TX, HSPI_TX_MARK), + PINMUX_GPIO(GPIO_FN_DB5, DB5_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RXD3, ETH_RXD3_MARK), + PINMUX_GPIO(GPIO_FN_DB4, DB4_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RXD2, ETH_RXD2_MARK), + PINMUX_GPIO(GPIO_FN_DB3, DB3_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RXD1, ETH_RXD1_MARK), + PINMUX_GPIO(GPIO_FN_DB2, DB2_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RXD0, ETH_RXD0_MARK), + PINMUX_GPIO(GPIO_FN_DB1, DB1_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RX_DV, ETH_RX_DV_MARK), + PINMUX_GPIO(GPIO_FN_DB0, DB0_MARK), + PINMUX_GPIO(GPIO_FN_ETH_RX_ER, ETH_RX_ER_MARK), + PINMUX_GPIO(GPIO_FN_DCLKOUT, DCLKOUT_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_SLK, SCIF1_SLK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK), + PINMUX_GPIO(GPIO_FN_DACK1, DACK1_MARK), + PINMUX_GPIO(GPIO_FN_BACK, BACK_MARK), + PINMUX_GPIO(GPIO_FN_FALE, FALE_MARK), + PINMUX_GPIO(GPIO_FN_DACK0, DACK0_MARK), + PINMUX_GPIO(GPIO_FN_FCLE, FCLE_MARK), + PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK), + PINMUX_GPIO(GPIO_FN_BREQ, BREQ_MARK), + PINMUX_GPIO(GPIO_FN_USB_OVC1, USB_OVC1_MARK), + PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK), + PINMUX_GPIO(GPIO_FN_USB_OVC0, USB_OVC0_MARK), + PINMUX_GPIO(GPIO_FN_USB_PENC1, USB_PENC1_MARK), + PINMUX_GPIO(GPIO_FN_USB_PENC0, USB_PENC0_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SDOUT, HAC1_SDOUT_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_SDATA, SSI1_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1CMD, SDIF1CMD_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SDIN, HAC1_SDIN_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_SCK, SSI1_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1CD, SDIF1CD_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SYNC, HAC1_SYNC_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_WS, SSI1_WS_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1WP, SDIF1WP_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_BITCLK, HAC1_BITCLK_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_CLK, SSI1_CLK_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1CLK, SDIF1CLK_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SDOUT, HAC0_SDOUT_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_SDATA, SSI0_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1D3, SDIF1D3_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SDIN, HAC0_SDIN_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_SCK, SSI0_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1D2, SDIF1D2_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SYNC, HAC0_SYNC_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_WS, SSI0_WS_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1D1, SDIF1D1_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_BITCLK, HAC0_BITCLK_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_CLK, SSI0_CLK_MARK), + PINMUX_GPIO(GPIO_FN_SDIF1D0, SDIF1D0_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_SCK, SCIF3_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SSI2_SDATA, SSI2_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_RXD, SCIF3_RXD_MARK), + PINMUX_GPIO(GPIO_FN_TCLK, TCLK_MARK), + PINMUX_GPIO(GPIO_FN_SSI2_SCK, SSI2_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_TXD, SCIF3_TXD_MARK), + PINMUX_GPIO(GPIO_FN_HAC_RES, HAC_RES_MARK), + PINMUX_GPIO(GPIO_FN_SSI2_WS, SSI2_WS_MARK), + PINMUX_GPIO(GPIO_FN_DACK3, DACK3_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0CMD, SDIF0CMD_MARK), + PINMUX_GPIO(GPIO_FN_DACK2, DACK2_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0CD, SDIF0CD_MARK), + PINMUX_GPIO(GPIO_FN_DREQ3, DREQ3_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0WP, SDIF0WP_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_CTS, SCIF0_CTS_MARK), + PINMUX_GPIO(GPIO_FN_DREQ2, DREQ2_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0CLK, SDIF0CLK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_RTS, SCIF0_RTS_MARK), + PINMUX_GPIO(GPIO_FN_IRL7, IRL7_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0D3, SDIF0D3_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK), + PINMUX_GPIO(GPIO_FN_IRL6, IRL6_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0D2, SDIF0D2_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK), + PINMUX_GPIO(GPIO_FN_IRL5, IRL5_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0D1, SDIF0D1_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK), + PINMUX_GPIO(GPIO_FN_IRL4, IRL4_MARK), + PINMUX_GPIO(GPIO_FN_SDIF0D0, SDIF0D0_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK), + PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK), + PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK), + PINMUX_GPIO(GPIO_FN_CE2B, CE2B_MARK), + PINMUX_GPIO(GPIO_FN_DRAK3, DRAK3_MARK), + PINMUX_GPIO(GPIO_FN_CE2A, CE2A_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK), + PINMUX_GPIO(GPIO_FN_DRAK2, DRAK2_MARK), + PINMUX_GPIO(GPIO_FN_SSI3_WS, SSI3_WS_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK), + PINMUX_GPIO(GPIO_FN_DRAK1, DRAK1_MARK), + PINMUX_GPIO(GPIO_FN_SSI3_SDATA, SSI3_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_FSTATUS, FSTATUS_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK), + PINMUX_GPIO(GPIO_FN_DRAK0, DRAK0_MARK), + PINMUX_GPIO(GPIO_FN_SSI3_SCK, SSI3_SCK_MARK), + PINMUX_GPIO(GPIO_FN_FSE, FSE_MARK), +}; + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + { PINMUX_CFG_REG("PACR", 0xffcc0000, 16, 2) { + PA7_FN, PA7_OUT, PA7_IN, PA7_IN_PU, + PA6_FN, PA6_OUT, PA6_IN, PA6_IN_PU, + PA5_FN, PA5_OUT, PA5_IN, PA5_IN_PU, + PA4_FN, PA4_OUT, PA4_IN, PA4_IN_PU, + PA3_FN, PA3_OUT, PA3_IN, PA3_IN_PU, + PA2_FN, PA2_OUT, PA2_IN, PA2_IN_PU, + PA1_FN, PA1_OUT, PA1_IN, PA1_IN_PU, + PA0_FN, PA0_OUT, PA0_IN, PA0_IN_PU } + }, + { PINMUX_CFG_REG("PBCR", 0xffcc0002, 16, 2) { + PB7_FN, PB7_OUT, PB7_IN, PB7_IN_PU, + PB6_FN, PB6_OUT, PB6_IN, PB6_IN_PU, + PB5_FN, PB5_OUT, PB5_IN, PB5_IN_PU, + PB4_FN, PB4_OUT, PB4_IN, PB4_IN_PU, + PB3_FN, PB3_OUT, PB3_IN, PB3_IN_PU, + PB2_FN, PB2_OUT, PB2_IN, PB2_IN_PU, + PB1_FN, PB1_OUT, PB1_IN, PB1_IN_PU, + PB0_FN, PB0_OUT, PB0_IN, PB0_IN_PU } + }, + { PINMUX_CFG_REG("PCCR", 0xffcc0004, 16, 2) { + PC7_FN, PC7_OUT, PC7_IN, PC7_IN_PU, + PC6_FN, PC6_OUT, PC6_IN, PC6_IN_PU, + PC5_FN, PC5_OUT, PC5_IN, PC5_IN_PU, + PC4_FN, PC4_OUT, PC4_IN, PC4_IN_PU, + PC3_FN, PC3_OUT, PC3_IN, PC3_IN_PU, + PC2_FN, PC2_OUT, PC2_IN, PC2_IN_PU, + PC1_FN, PC1_OUT, PC1_IN, PC1_IN_PU, + PC0_FN, PC0_OUT, PC0_IN, PC0_IN_PU } + }, + { PINMUX_CFG_REG("PDCR", 0xffcc0006, 16, 2) { + PD7_FN, PD7_OUT, PD7_IN, PD7_IN_PU, + PD6_FN, PD6_OUT, PD6_IN, PD6_IN_PU, + PD5_FN, PD5_OUT, PD5_IN, PD5_IN_PU, + PD4_FN, PD4_OUT, PD4_IN, PD4_IN_PU, + PD3_FN, PD3_OUT, PD3_IN, PD3_IN_PU, + PD2_FN, PD2_OUT, PD2_IN, PD2_IN_PU, + PD1_FN, PD1_OUT, PD1_IN, PD1_IN_PU, + PD0_FN, PD0_OUT, PD0_IN, PD0_IN_PU } + }, + { PINMUX_CFG_REG("PECR", 0xffcc0008, 16, 2) { + PE7_FN, PE7_OUT, PE7_IN, PE7_IN_PU, + PE6_FN, PE6_OUT, PE6_IN, PE6_IN_PU, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG("PFCR", 0xffcc000a, 16, 2) { + PF7_FN, PF7_OUT, PF7_IN, PF7_IN_PU, + PF6_FN, PF6_OUT, PF6_IN, PF6_IN_PU, + PF5_FN, PF5_OUT, PF5_IN, PF5_IN_PU, + PF4_FN, PF4_OUT, PF4_IN, PF4_IN_PU, + PF3_FN, PF3_OUT, PF3_IN, PF3_IN_PU, + PF2_FN, PF2_OUT, PF2_IN, PF2_IN_PU, + PF1_FN, PF1_OUT, PF1_IN, PF1_IN_PU, + PF0_FN, PF0_OUT, PF0_IN, PF0_IN_PU } + }, + { PINMUX_CFG_REG("PGCR", 0xffcc000c, 16, 2) { + PG7_FN, PG7_OUT, PG7_IN, PG7_IN_PU, + PG6_FN, PG6_OUT, PG6_IN, PG6_IN_PU, + PG5_FN, PG5_OUT, PG5_IN, PG5_IN_PU, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG("PHCR", 0xffcc000e, 16, 2) { + PH7_FN, PH7_OUT, PH7_IN, PH7_IN_PU, + PH6_FN, PH6_OUT, PH6_IN, PH6_IN_PU, + PH5_FN, PH5_OUT, PH5_IN, PH5_IN_PU, + PH4_FN, PH4_OUT, PH4_IN, PH4_IN_PU, + PH3_FN, PH3_OUT, PH3_IN, PH3_IN_PU, + PH2_FN, PH2_OUT, PH2_IN, PH2_IN_PU, + PH1_FN, PH1_OUT, PH1_IN, PH1_IN_PU, + PH0_FN, PH0_OUT, PH0_IN, PH0_IN_PU } + }, + { PINMUX_CFG_REG("PJCR", 0xffcc0010, 16, 2) { + PJ7_FN, PJ7_OUT, PJ7_IN, PJ7_IN_PU, + PJ6_FN, PJ6_OUT, PJ6_IN, PJ6_IN_PU, + PJ5_FN, PJ5_OUT, PJ5_IN, PJ5_IN_PU, + PJ4_FN, PJ4_OUT, PJ4_IN, PJ4_IN_PU, + PJ3_FN, PJ3_OUT, PJ3_IN, PJ3_IN_PU, + PJ2_FN, PJ2_OUT, PJ2_IN, PJ2_IN_PU, + PJ1_FN, PJ1_OUT, PJ1_IN, PJ1_IN_PU, + 0, 0, 0, 0, } + }, + { PINMUX_CFG_REG("P1MSELR", 0xffcc0080, 16, 1) { + 0, 0, + P1MSEL14_0, P1MSEL14_1, + P1MSEL13_0, P1MSEL13_1, + P1MSEL12_0, P1MSEL12_1, + P1MSEL11_0, P1MSEL11_1, + P1MSEL10_0, P1MSEL10_1, + P1MSEL9_0, P1MSEL9_1, + P1MSEL8_0, P1MSEL8_1, + P1MSEL7_0, P1MSEL7_1, + P1MSEL6_0, P1MSEL6_1, + P1MSEL5_0, P1MSEL5_1, + P1MSEL4_0, P1MSEL4_1, + P1MSEL3_0, P1MSEL3_1, + P1MSEL2_0, P1MSEL2_1, + P1MSEL1_0, P1MSEL1_1, + P1MSEL0_0, P1MSEL0_1 } + }, + { PINMUX_CFG_REG("P2MSELR", 0xffcc0082, 16, 1) { + P2MSEL15_0, P2MSEL15_1, + P2MSEL14_0, P2MSEL14_1, + P2MSEL13_0, P2MSEL13_1, + P2MSEL12_0, P2MSEL12_1, + P2MSEL11_0, P2MSEL11_1, + P2MSEL10_0, P2MSEL10_1, + P2MSEL9_0, P2MSEL9_1, + P2MSEL8_0, P2MSEL8_1, + P2MSEL7_0, P2MSEL7_1, + P2MSEL6_0, P2MSEL6_1, + P2MSEL5_0, P2MSEL5_1, + P2MSEL4_0, P2MSEL4_1, + P2MSEL3_0, P2MSEL3_1, + P2MSEL2_0, P2MSEL2_1, + P2MSEL1_0, P2MSEL1_1, + P2MSEL0_0, P2MSEL0_1 } + }, + {} +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PADR", 0xffcc0020, 8) { + PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA, + PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA } + }, + { PINMUX_DATA_REG("PBDR", 0xffcc0022, 8) { + PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA, + PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA } + }, + { PINMUX_DATA_REG("PCDR", 0xffcc0024, 8) { + PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA, + PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA } + }, + { PINMUX_DATA_REG("PDDR", 0xffcc0026, 8) { + PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA, + PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA } + }, + { PINMUX_DATA_REG("PEDR", 0xffcc0028, 8) { + PE7_DATA, PE6_DATA, + 0, 0, 0, 0, 0, 0 } + }, + { PINMUX_DATA_REG("PFDR", 0xffcc002a, 8) { + PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA, + PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA } + }, + { PINMUX_DATA_REG("PGDR", 0xffcc002c, 8) { + PG7_DATA, PG6_DATA, PG5_DATA, 0, + 0, 0, 0, 0 } + }, + { PINMUX_DATA_REG("PHDR", 0xffcc002e, 8) { + PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA, + PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA } + }, + { PINMUX_DATA_REG("PJDR", 0xffcc0030, 8) { + PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA, + PJ3_DATA, PJ2_DATA, PJ1_DATA, 0 } + }, + { }, +}; + +static struct pinmux_info sh7786_pinmux_info = { + .name = "sh7786_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PA7, + .last_gpio = GPIO_FN_FSE, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; + +static int __init plat_pinmux_setup(void) +{ + return register_pinmux(&sh7786_pinmux_info); +} + +arch_initcall(plat_pinmux_setup); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 4ff4dc64520c..c1549382c87c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -12,6 +12,7 @@ #include <linux/serial.h> #include <linux/serial_sci.h> #include <linux/uio_driver.h> +#include <linux/sh_cmt.h> #include <asm/clock.h> static struct resource iic0_resources[] = { @@ -140,6 +141,38 @@ static struct platform_device jpu_device = { .num_resources = ARRAY_SIZE(jpu_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -175,6 +208,7 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7343_devices[] __initdata = { + &cmt_device, &iic0_device, &iic1_device, &sci_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 839ae97a7fd2..93ecf8ed5c6c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -14,6 +14,7 @@ #include <linux/serial.h> #include <linux/serial_sci.h> #include <linux/uio_driver.h> +#include <linux/sh_cmt.h> #include <asm/clock.h> static struct resource iic_resources[] = { @@ -147,6 +148,38 @@ static struct platform_device veu1_device = { .num_resources = ARRAY_SIZE(veu1_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -167,6 +200,7 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7366_devices[] __initdata = { + &cmt_device, &iic_device, &sci_device, &usb_host_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 5146afc156e0..0e5d204bc792 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -13,6 +13,7 @@ #include <linux/serial_sci.h> #include <linux/mm.h> #include <linux/uio_driver.h> +#include <linux/sh_cmt.h> #include <asm/clock.h> #include <asm/mmzone.h> @@ -176,6 +177,38 @@ static struct platform_device jpu_device = { .num_resources = ARRAY_SIZE(jpu_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -209,6 +242,7 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7722_devices[] __initdata = { + &cmt_device, &rtc_device, &usbf_device, &iic_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 849770d780ae..5338dacbcfba 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -13,6 +13,7 @@ #include <linux/mm.h> #include <linux/serial_sci.h> #include <linux/uio_driver.h> +#include <linux/sh_cmt.h> #include <asm/clock.h> #include <asm/mmzone.h> @@ -100,6 +101,38 @@ static struct platform_device veu1_device = { .num_resources = ARRAY_SIZE(veu1_resources), }; +static struct sh_cmt_config cmt_platform_data = { + .name = "CMT", + .channel_offset = 0x60, + .timer_bit = 5, + .clk = "cmt0", + .clockevent_rating = 125, + .clocksource_rating = 200, +}; + +static struct resource cmt_resources[] = { + [0] = { + .name = "CMT", + .start = 0x044a0060, + .end = 0x044a006b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cmt_device = { + .name = "sh_cmt", + .id = 0, + .dev = { + .platform_data = &cmt_platform_data, + }, + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -221,6 +254,7 @@ static struct platform_device iic_device = { }; static struct platform_device *sh7723_devices[] __initdata = { + &cmt_device, &sci_device, &rtc_device, &iic_device, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 3c5b629887a8..bdf0f61ae1ed 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -3,7 +3,7 @@ * * Copyright (C) 2006 Paul Mundt * Copyright (C) 2007 Yoshihiro Shimoda - * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -22,18 +22,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ - .start = 20, + /* Shared Period/Carry/Alarm IRQ */ + .start = 20, .flags = IORESOURCE_IRQ, }, }; @@ -50,17 +40,17 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, + .irqs = { 40, 40, 40, 40 }, }, { .mapbase = 0xffe08000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 76, 77, 79, 78 }, + .irqs = { 76, 76, 76, 76 }, }, { .mapbase = 0xffe10000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 104, 105, 107, 106 }, + .irqs = { 104, 104, 104, 104 }, }, { .flags = 0, } @@ -148,93 +138,65 @@ enum { IRL_HHLL, IRL_HHLH, IRL_HHHL, IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, TMU0, TMU1, TMU2, TMU2_TICPI, - HUDI, LCDC, - DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - DMAC0_DMINT4, DMAC0_DMINT5, - IIC0, IIC1, - CMT, - GEINT0, GEINT1, GEINT2, - HAC, - PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, - PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, - STIF0, STIF1, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - SIOF0, SIOF1, SIOF2, - USBH, USBFI0, USBFI1, - TPU, PCC, - MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, - SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND, + RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, LCDC, DMAC, SCIF0, IIC0, IIC1, CMT, GETHER, HAC, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5, + STIF0, STIF1, SCIF1, SIOF0, SIOF1, SIOF2, + USBH, USBF, TPU, PCC, MMCIF, SIM, TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3, - SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, - GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3, + SCIF2, GPIO, /* interrupt groups */ - TMU012, TMU345, RTC, DMAC, SCIF0, GETHER, PCIC5, - SCIF1, USBF, MMCIF, SIM, SCIF2, GPIO, + TMU012, TMU345, }; static struct intc_vect vectors[] __initdata = { - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600), INTC_VECT(LCDC, 0x620), - INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660), - INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0), - INTC_VECT(DMAC0_DMAE, 0x6c0), - INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), - INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), - INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0), + INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660), + INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0), + INTC_VECT(DMAC, 0x6c0), + INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720), + INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760), + INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0), INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0), - INTC_VECT(CMT, 0x900), INTC_VECT(GEINT0, 0x920), - INTC_VECT(GEINT1, 0x940), INTC_VECT(GEINT2, 0x960), + INTC_VECT(CMT, 0x900), INTC_VECT(GETHER, 0x920), + INTC_VECT(GETHER, 0x940), INTC_VECT(GETHER, 0x960), INTC_VECT(HAC, 0x980), INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), - INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), - INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), - INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0), + INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0), + INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20), INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60), - INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0), - INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0), + INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0), + INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0), INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20), - INTC_VECT(USBH, 0xc60), INTC_VECT(USBFI0, 0xc80), - INTC_VECT(USBFI1, 0xca0), + INTC_VECT(USBH, 0xc60), INTC_VECT(USBF, 0xc80), + INTC_VECT(USBF, 0xca0), INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0), - INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), - INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), - INTC_VECT(SIM_ERI, 0xd80), INTC_VECT(SIM_RXI, 0xda0), - INTC_VECT(SIM_TXI, 0xdc0), INTC_VECT(SIM_TEND, 0xde0), + INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20), + INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60), + INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0), + INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0), INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60), INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0), - INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20), - INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60), - INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0), - INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0), + INTC_VECT(SCIF2, 0xf00), INTC_VECT(SCIF2, 0xf20), + INTC_VECT(SCIF2, 0xf40), INTC_VECT(SCIF2, 0xf60), + INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0), + INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0), }; static struct intc_group groups[] __initdata = { INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), INTC_GROUP(TMU345, TMU3, TMU4, TMU5), - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), - INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, - DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(GETHER, GEINT0, GEINT1, GEINT2), - INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(USBF, USBFI0, USBFI1), - INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), - INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND), - INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), - INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3), }; static struct intc_mask_reg mask_registers[] __initdata = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index fb8200cc7440..6f7227cd65bf 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -20,17 +20,7 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - /* Period IRQ */ - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = 22, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ + /* Shared Period/Carry/Alarm IRQ */ .start = 20, .flags = IORESOURCE_IRQ, }, @@ -48,12 +38,12 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, + .irqs = { 40, 40, 40, 40 }, }, { .mapbase = 0xffe10000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 76, 77, 79, 78 }, + .irqs = { 76, 76, 76, 76 }, }, { .flags = 0, } @@ -90,82 +80,55 @@ enum { IRL_HHLL, IRL_HHLH, IRL_HHHL, IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, - RTC_ATI, RTC_PRI, RTC_CUI, - WDT, - TMU0, TMU1, TMU2, TMU2_TICPI, - HUDI, - DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - DMAC0_DMINT4, DMAC0_DMINT5, DMAC1_DMINT6, DMAC1_DMINT7, - CMT, HAC, - PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, - PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - SIOF, HSPI, - MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, - DMAC1_DMINT8, DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, - TMU3, TMU4, TMU5, - SSI, - FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1, - GPIOI0, GPIOI1, GPIOI2, GPIOI3, + RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, DMAC0, SCIF0, DMAC1, CMT, HAC, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5, + SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL, GPIO, /* interrupt groups */ - RTC, TMU012, DMAC0, SCIF0, DMAC45, DMAC1, - PCIC5, SCIF1, MMCIF, TMU345, FLCTL, GPIO, + TMU012, TMU345, }; static struct intc_vect vectors[] __initdata = { - INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), - INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0), + INTC_VECT(RTC, 0x4c0), INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600), - INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660), - INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0), - INTC_VECT(DMAC0_DMAE, 0x6c0), - INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), - INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), - INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0), - INTC_VECT(DMAC1_DMINT6, 0x7c0), INTC_VECT(DMAC1_DMINT7, 0x7e0), + INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660), + INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0), + INTC_VECT(DMAC0, 0x6c0), + INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720), + INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760), + INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0), + INTC_VECT(DMAC1, 0x7c0), INTC_VECT(DMAC1, 0x7e0), INTC_VECT(CMT, 0x900), INTC_VECT(HAC, 0x980), INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), - INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), - INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), - INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), - INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0), - INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0), + INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0), + INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20), + INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0), + INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0), INTC_VECT(SIOF, 0xc00), INTC_VECT(HSPI, 0xc80), - INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), - INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), - INTC_VECT(DMAC1_DMINT8, 0xd80), INTC_VECT(DMAC1_DMINT9, 0xda0), - INTC_VECT(DMAC1_DMINT10, 0xdc0), INTC_VECT(DMAC1_DMINT11, 0xde0), + INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20), + INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60), + INTC_VECT(DMAC1, 0xd80), INTC_VECT(DMAC1, 0xda0), + INTC_VECT(DMAC1, 0xdc0), INTC_VECT(DMAC1, 0xde0), INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), INTC_VECT(TMU5, 0xe40), INTC_VECT(SSI, 0xe80), - INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20), - INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60), - INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0), - INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0), + INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20), + INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60), + INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0), + INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0), }; static struct intc_group groups[] __initdata = { - INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), - INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, - DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, - DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11), - INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), INTC_GROUP(TMU345, TMU3, TMU4, TMU5), - INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND, - FLCTL_FLTRQ0, FLCTL_FLTRQ1), - INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; static struct intc_mask_reg mask_registers[] __initdata = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 30baa63b24c8..d80802a49dbd 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -20,18 +20,13 @@ static struct plat_sci_port sci_platform_data[] = { .mapbase = 0xffea0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 40, 41, 43, 42 }, + .irqs = { 40, 40, 40, 40 }, }, { .mapbase = 0xffeb0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 44, 45, 47, 46 }, - }, - - /* - * The rest of these all have multiplexed IRQs - */ - { + .irqs = { 44, 44, 44, 44 }, + }, { .mapbase = 0xffec0000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, @@ -91,33 +86,19 @@ enum { IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, - WDT, - TMU0, TMU1, TMU2, TMU2_TICPI, - HUDI, - DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, - DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE, - SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, - SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, - DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9, - DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE, - HSPI, + WDT, TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, DMAC0, SCIF0, SCIF1, DMAC1, HSPI, SCIF2, SCIF3, SCIF4, SCIF5, - PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, - PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, - SIOF, - MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, - DU, - GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5, + SIOF, MMCIF, DU, GDTA, TMU3, TMU4, TMU5, SSI0, SSI1, HAC0, HAC1, - FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1, - GPIOI0, GPIOI1, GPIOI2, GPIOI3, + FLCTL, GPIO, /* interrupt groups */ - TMU012, DMAC0, SCIF0, SCIF1, DMAC1, - PCIC5, MMCIF, GDTA, TMU345, FLCTL, GPIO + TMU012, TMU345 }; static struct intc_vect vectors[] __initdata = { @@ -125,57 +106,45 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600), - INTC_VECT(DMAC0_DMINT0, 0x620), INTC_VECT(DMAC0_DMINT1, 0x640), - INTC_VECT(DMAC0_DMINT2, 0x660), INTC_VECT(DMAC0_DMINT3, 0x680), - INTC_VECT(DMAC0_DMINT4, 0x6a0), INTC_VECT(DMAC0_DMINT5, 0x6c0), - INTC_VECT(DMAC0_DMAE, 0x6e0), - INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), - INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), - INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0), - INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0), - INTC_VECT(DMAC1_DMINT6, 0x880), INTC_VECT(DMAC1_DMINT7, 0x8a0), - INTC_VECT(DMAC1_DMINT8, 0x8c0), INTC_VECT(DMAC1_DMINT9, 0x8e0), - INTC_VECT(DMAC1_DMINT10, 0x900), INTC_VECT(DMAC1_DMINT11, 0x920), - INTC_VECT(DMAC1_DMAE, 0x940), + INTC_VECT(DMAC0, 0x620), INTC_VECT(DMAC0, 0x640), + INTC_VECT(DMAC0, 0x660), INTC_VECT(DMAC0, 0x680), + INTC_VECT(DMAC0, 0x6a0), INTC_VECT(DMAC0, 0x6c0), + INTC_VECT(DMAC0, 0x6e0), + INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720), + INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760), + INTC_VECT(SCIF1, 0x780), INTC_VECT(SCIF1, 0x7a0), + INTC_VECT(SCIF1, 0x7c0), INTC_VECT(SCIF1, 0x7e0), + INTC_VECT(DMAC1, 0x880), INTC_VECT(DMAC1, 0x8a0), + INTC_VECT(DMAC1, 0x8c0), INTC_VECT(DMAC1, 0x8e0), + INTC_VECT(DMAC1, 0x900), INTC_VECT(DMAC1, 0x920), + INTC_VECT(DMAC1, 0x940), INTC_VECT(HSPI, 0x960), INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0), INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0), INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), - INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), - INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), - INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0), + INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0), + INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20), INTC_VECT(SIOF, 0xc00), - INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), - INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), + INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20), + INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60), INTC_VECT(DU, 0xd80), - INTC_VECT(GDTA_GACLI, 0xda0), INTC_VECT(GDTA_GAMCI, 0xdc0), - INTC_VECT(GDTA_GAERI, 0xde0), + INTC_VECT(GDTA, 0xda0), INTC_VECT(GDTA, 0xdc0), + INTC_VECT(GDTA, 0xde0), INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), INTC_VECT(TMU5, 0xe40), INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0), - INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20), - INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60), - INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0), - INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0), + INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20), + INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60), + INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0), + INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0), }; static struct intc_group groups[] __initdata = { INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), - INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, - DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), - INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), - INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), - INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, - DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE), - INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), - INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), - INTC_GROUP(GDTA, GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI), INTC_GROUP(TMU345, TMU3, TMU4, TMU5), - INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND, - FLCTL_FLTRQ0, FLCTL_FLTRQ1), - INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; static struct intc_mask_reg mask_registers[] __initdata = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c new file mode 100644 index 000000000000..5a47e1cf442e --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -0,0 +1,490 @@ +/* + * SH7786 Setup + * + * Copyright (C) 2009 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Based on SH7785 Setup + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/serial_sci.h> +#include <linux/io.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> +#include <asm/mmzone.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffea0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, + /* + * The rest of these all have multiplexed IRQs + */ + { + .mapbase = 0xffeb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 44, 44, 44 }, + }, { + .mapbase = 0xffec0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 50, 50, 50, 50 }, + }, { + .mapbase = 0xffed0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 51, 51, 51, 51 }, + }, { + .mapbase = 0xffee0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 52, 52, 52, 52 }, + }, { + .mapbase = 0xffef0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 53, 53, 53, 53 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct resource usb_ohci_resources[] = { + [0] = { + .start = 0xffe70400, + .end = 0xffe704ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 77, + .end = 77, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 usb_ohci_dma_mask = DMA_BIT_MASK(32); +static struct platform_device usb_ohci_device = { + .name = "sh_ohci", + .id = -1, + .dev = { + .dma_mask = &usb_ohci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_ohci_resources), + .resource = usb_ohci_resources, +}; + +static struct platform_device *sh7786_devices[] __initdata = { + &sci_device, + &usb_ohci_device, +}; + + +/* + * Please call this function if your platform board + * use external clock for USB + * */ +#define USBCTL0 0xffe70858 +#define CLOCK_MODE_MASK 0xffffff7f +#define EXT_CLOCK_MODE 0x00000080 +void __init sh7786_usb_use_exclock(void) +{ + u32 val = __raw_readl(USBCTL0) & CLOCK_MODE_MASK; + __raw_writel(val | EXT_CLOCK_MODE, USBCTL0); +} + +#define USBINITREG1 0xffe70094 +#define USBINITREG2 0xffe7009c +#define USBINITVAL1 0x00ff0040 +#define USBINITVAL2 0x00000001 + +#define USBPCTL1 0xffe70804 +#define USBST 0xffe70808 +#define PHY_ENB 0x00000001 +#define PLL_ENB 0x00000002 +#define PHY_RST 0x00000004 +#define ACT_PLL_STATUS 0xc0000000 +static void __init sh7786_usb_setup(void) +{ + int i = 1000000; + + /* + * USB initial settings + * + * The following settings are necessary + * for using the USB modules. + * + * see "USB Inital Settings" for detail + */ + __raw_writel(USBINITVAL1, USBINITREG1); + __raw_writel(USBINITVAL2, USBINITREG2); + + /* + * Set the PHY and PLL enable bit + */ + __raw_writel(PHY_ENB | PLL_ENB, USBPCTL1); + while (i-- && + ((__raw_readl(USBST) & ACT_PLL_STATUS) != ACT_PLL_STATUS)) + cpu_relax(); + + if (i) { + /* Set the PHY RST bit */ + __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1); + printk(KERN_INFO "sh7786 usb setup done\n"); + } +} + +static int __init sh7786_devices_setup(void) +{ + sh7786_usb_setup(); + return platform_add_devices(sh7786_devices, + ARRAY_SIZE(sh7786_devices)); +} +device_initcall(sh7786_devices_setup); + +enum { + UNUSED = 0, + + /* interrupt sources */ + + IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH, + IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH, + IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH, + IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, + + IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH, + IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH, + IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH, + IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, + + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + WDT, + TMU0_0, TMU0_1, TMU0_2, TMU0_3, + TMU1_0, TMU1_1, TMU1_2, + DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6, + HUDI1, HUDI0, + DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3, + HPB_0, HPB_1, HPB_2, + SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3, + SCIF1, + TMU2, TMU3, + SCIF2, SCIF3, SCIF4, SCIF5, + Eth_0, Eth_1, + PCIeC0_0, PCIeC0_1, PCIeC0_2, + PCIeC1_0, PCIeC1_1, PCIeC1_2, + USB, + I2C0, I2C1, + DU, + SSI0, SSI1, SSI2, SSI3, + PCIeC2_0, PCIeC2_1, PCIeC2_2, + HAC0, HAC1, + FLCTL, + HSPI, + GPIO0, GPIO1, + Thermal, + INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7, + + /* interrupt groups */ +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(WDT, 0x3e0), + INTC_VECT(TMU0_0, 0x400), INTC_VECT(TMU0_1, 0x420), + INTC_VECT(TMU0_2, 0x440), INTC_VECT(TMU0_3, 0x460), + INTC_VECT(TMU1_0, 0x480), INTC_VECT(TMU1_1, 0x4a0), + INTC_VECT(TMU1_2, 0x4c0), + INTC_VECT(DMAC0_0, 0x500), INTC_VECT(DMAC0_1, 0x520), + INTC_VECT(DMAC0_2, 0x540), INTC_VECT(DMAC0_3, 0x560), + INTC_VECT(DMAC0_4, 0x580), INTC_VECT(DMAC0_5, 0x5a0), + INTC_VECT(DMAC0_6, 0x5c0), + INTC_VECT(HUDI1, 0x5e0), INTC_VECT(HUDI0, 0x600), + INTC_VECT(DMAC1_0, 0x620), INTC_VECT(DMAC1_1, 0x640), + INTC_VECT(DMAC1_2, 0x660), INTC_VECT(DMAC1_3, 0x680), + INTC_VECT(HPB_0, 0x6a0), INTC_VECT(HPB_1, 0x6c0), + INTC_VECT(HPB_2, 0x6e0), + INTC_VECT(SCIF0_0, 0x700), INTC_VECT(SCIF0_1, 0x720), + INTC_VECT(SCIF0_2, 0x740), INTC_VECT(SCIF0_3, 0x760), + INTC_VECT(SCIF1, 0x780), + INTC_VECT(TMU2, 0x7a0), INTC_VECT(TMU3, 0x7c0), + INTC_VECT(SCIF2, 0x840), INTC_VECT(SCIF3, 0x860), + INTC_VECT(SCIF4, 0x880), INTC_VECT(SCIF5, 0x8a0), + INTC_VECT(Eth_0, 0x8c0), INTC_VECT(Eth_1, 0x8e0), + INTC_VECT(PCIeC0_0, 0xae0), INTC_VECT(PCIeC0_1, 0xb00), + INTC_VECT(PCIeC0_2, 0xb20), + INTC_VECT(PCIeC1_0, 0xb40), INTC_VECT(PCIeC1_1, 0xb60), + INTC_VECT(PCIeC1_2, 0xb80), + INTC_VECT(USB, 0xba0), + INTC_VECT(I2C0, 0xcc0), INTC_VECT(I2C1, 0xce0), + INTC_VECT(DU, 0xd00), + INTC_VECT(SSI0, 0xd20), INTC_VECT(SSI1, 0xd40), + INTC_VECT(SSI2, 0xd60), INTC_VECT(SSI3, 0xd80), + INTC_VECT(PCIeC2_0, 0xda0), INTC_VECT(PCIeC2_1, 0xdc0), + INTC_VECT(PCIeC2_2, 0xde0), + INTC_VECT(HAC0, 0xe00), INTC_VECT(HAC1, 0xe20), + INTC_VECT(FLCTL, 0xe40), + INTC_VECT(HSPI, 0xe80), + INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0), + INTC_VECT(Thermal, 0xee0), +}; + +/* FIXME: Main CPU support only now */ +#if 1 /* Main CPU */ +#define CnINTMSK0 0xfe410030 +#define CnINTMSK1 0xfe410040 +#define CnINTMSKCLR0 0xfe410050 +#define CnINTMSKCLR1 0xfe410060 +#define CnINT2MSKR0 0xfe410a20 +#define CnINT2MSKR1 0xfe410a24 +#define CnINT2MSKR2 0xfe410a28 +#define CnINT2MSKR3 0xfe410a2c +#define CnINT2MSKCR0 0xfe410a30 +#define CnINT2MSKCR1 0xfe410a34 +#define CnINT2MSKCR2 0xfe410a38 +#define CnINT2MSKCR3 0xfe410a3c +#else /* Sub CPU */ +#define CnINTMSK0 0xfe410034 +#define CnINTMSK1 0xfe410044 +#define CnINTMSKCLR0 0xfe410054 +#define CnINTMSKCLR1 0xfe410064 +#define CnINT2MSKR0 0xfe410b20 +#define CnINT2MSKR1 0xfe410b24 +#define CnINT2MSKR2 0xfe410b28 +#define CnINT2MSKR3 0xfe410b2c +#define CnINT2MSKCR0 0xfe410b30 +#define CnINT2MSKCR1 0xfe410b34 +#define CnINT2MSKCR2 0xfe410b38 +#define CnINT2MSKCR3 0xfe410b3c +#endif + +#define INTMSK2 0xfe410068 +#define INTMSKCLR2 0xfe41006c + +static struct intc_mask_reg mask_registers[] __initdata = { + { CnINTMSK0, CnINTMSKCLR0, 32, + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, + { INTMSK2, INTMSKCLR2, 32, + { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH, + IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH, + IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH, + IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0, + IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH, + IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH, + IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH, + IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } }, + { CnINT2MSKR0, CnINT2MSKCR0 , 32, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT } }, + { CnINT2MSKR1, CnINT2MSKCR1, 32, + { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0, + DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6, + HUDI1, HUDI0, + DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3, + HPB_0, HPB_1, HPB_2, + SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3, + SCIF1, + TMU2, TMU3, 0, } }, + { CnINT2MSKR2, CnINT2MSKCR2, 32, + { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5, + Eth_0, Eth_1, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + PCIeC0_0, PCIeC0_1, PCIeC0_2, + PCIeC1_0, PCIeC1_1, PCIeC1_2, + USB, 0, 0 } }, + { CnINT2MSKR3, CnINT2MSKCR3, 32, + { 0, 0, 0, 0, 0, 0, + I2C0, I2C1, + DU, SSI0, SSI1, SSI2, SSI3, + PCIeC2_0, PCIeC2_1, PCIeC2_2, + HAC0, HAC1, + FLCTL, 0, + HSPI, GPIO0, GPIO1, Thermal, + 0, 0, 0, 0, 0, 0, 0, 0 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfe410800, 0, 32, 8, /* INT2PRI0 */ { 0, 0, 0, WDT } }, + { 0xfe410804, 0, 32, 8, /* INT2PRI1 */ { TMU0_0, TMU0_1, + TMU0_2, TMU0_3 } }, + { 0xfe410808, 0, 32, 8, /* INT2PRI2 */ { TMU1_0, TMU1_1, + TMU1_2, 0 } }, + { 0xfe41080c, 0, 32, 8, /* INT2PRI3 */ { DMAC0_0, DMAC0_1, + DMAC0_2, DMAC0_3 } }, + { 0xfe410810, 0, 32, 8, /* INT2PRI4 */ { DMAC0_4, DMAC0_5, + DMAC0_6, HUDI1 } }, + { 0xfe410814, 0, 32, 8, /* INT2PRI5 */ { HUDI0, DMAC1_0, + DMAC1_1, DMAC1_2 } }, + { 0xfe410818, 0, 32, 8, /* INT2PRI6 */ { DMAC1_3, HPB_0, + HPB_1, HPB_2 } }, + { 0xfe41081c, 0, 32, 8, /* INT2PRI7 */ { SCIF0_0, SCIF0_1, + SCIF0_2, SCIF0_3 } }, + { 0xfe410820, 0, 32, 8, /* INT2PRI8 */ { SCIF1, TMU2, TMU3, 0 } }, + { 0xfe410824, 0, 32, 8, /* INT2PRI9 */ { 0, 0, SCIF2, SCIF3 } }, + { 0xfe410828, 0, 32, 8, /* INT2PRI10 */ { SCIF4, SCIF5, + Eth_0, Eth_1 } }, + { 0xfe41082c, 0, 32, 8, /* INT2PRI11 */ { 0, 0, 0, 0 } }, + { 0xfe410830, 0, 32, 8, /* INT2PRI12 */ { 0, 0, 0, 0 } }, + { 0xfe410834, 0, 32, 8, /* INT2PRI13 */ { 0, 0, 0, 0 } }, + { 0xfe410838, 0, 32, 8, /* INT2PRI14 */ { 0, 0, 0, PCIeC0_0 } }, + { 0xfe41083c, 0, 32, 8, /* INT2PRI15 */ { PCIeC0_1, PCIeC0_2, + PCIeC1_0, PCIeC1_1 } }, + { 0xfe410840, 0, 32, 8, /* INT2PRI16 */ { PCIeC1_2, USB, 0, 0 } }, + { 0xfe410844, 0, 32, 8, /* INT2PRI17 */ { 0, 0, 0, 0 } }, + { 0xfe410848, 0, 32, 8, /* INT2PRI18 */ { 0, 0, I2C0, I2C1 } }, + { 0xfe41084c, 0, 32, 8, /* INT2PRI19 */ { DU, SSI0, SSI1, SSI2 } }, + { 0xfe410850, 0, 32, 8, /* INT2PRI20 */ { SSI3, PCIeC2_0, + PCIeC2_1, PCIeC2_2 } }, + { 0xfe410854, 0, 32, 8, /* INT2PRI21 */ { HAC0, HAC1, FLCTL, 0 } }, + { 0xfe410858, 0, 32, 8, /* INT2PRI22 */ { HSPI, GPIO0, + GPIO1, Thermal } }, + { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } }, + { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ + +static struct intc_vect vectors_irq0123[] __initdata = { + INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240), + INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0), +}; + +static struct intc_vect vectors_irq4567[] __initdata = { + INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340), + INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0), +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xfe410024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7786-irq0123", + vectors_irq0123, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); + +static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7786-irq4567", + vectors_irq4567, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); + +/* External interrupt pins in IRL mode */ + +static struct intc_vect vectors_irl0123[] __initdata = { + INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220), + INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260), + INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0), + INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0), + INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320), + INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360), + INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0), + INTC_VECT(IRL0_HHHL, 0x3c0), +}; + +static struct intc_vect vectors_irl4567[] __initdata = { + INTC_VECT(IRL4_LLLL, 0x900), INTC_VECT(IRL4_LLLH, 0x920), + INTC_VECT(IRL4_LLHL, 0x940), INTC_VECT(IRL4_LLHH, 0x960), + INTC_VECT(IRL4_LHLL, 0x980), INTC_VECT(IRL4_LHLH, 0x9a0), + INTC_VECT(IRL4_LHHL, 0x9c0), INTC_VECT(IRL4_LHHH, 0x9e0), + INTC_VECT(IRL4_HLLL, 0xa00), INTC_VECT(IRL4_HLLH, 0xa20), + INTC_VECT(IRL4_HLHL, 0xa40), INTC_VECT(IRL4_HLHH, 0xa60), + INTC_VECT(IRL4_HHLL, 0xa80), INTC_VECT(IRL4_HHLH, 0xaa0), + INTC_VECT(IRL4_HHHL, 0xac0), +}; + +static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7786-irl0123", vectors_irl0123, + NULL, mask_registers, NULL, NULL); + +static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567, + NULL, mask_registers, NULL, NULL); + +#define INTC_ICR0 0xfe410000 +#define INTC_INTMSK0 CnINTMSK0 +#define INTC_INTMSK1 CnINTMSK1 +#define INTC_INTMSK2 INTMSK2 +#define INTC_INTMSKCLR1 CnINTMSKCLR1 +#define INTC_INTMSKCLR2 INTMSKCLR2 + +void __init plat_irq_setup(void) +{ + /* disable IRQ3-0 + IRQ7-4 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + /* select IRL mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); + + register_intc_controller(&intc_desc); +} + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ7654: + /* select IRQ mode for IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0); + register_intc_controller(&intc_desc_irq4567); + break; + case IRQ_MODE_IRQ3210: + /* select IRQ mode for IRL3-0 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0); + register_intc_controller(&intc_desc_irq0123); + break; + case IRQ_MODE_IRL7654: + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_desc_irl4567); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_desc_irl0123); + break; + default: + BUG(); + } +} + +void __init plat_mem_setup(void) +{ +} diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile new file mode 100644 index 000000000000..08bfa7c7db29 --- /dev/null +++ b/arch/sh/kernel/cpu/shmobile/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Linux/SuperH SH-Mobile backends. +# + +# Power Management & Sleep mode +obj-$(CONFIG_PM) += pm.o sleep.o diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c new file mode 100644 index 000000000000..8c067adf6830 --- /dev/null +++ b/arch/sh/kernel/cpu/shmobile/pm.c @@ -0,0 +1,92 @@ +/* + * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c + * + * Power management support code for SuperH Mobile + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/suspend.h> +#include <asm/suspend.h> +#include <asm/uaccess.h> + +/* + * Sleep modes available on SuperH Mobile: + * + * Sleep mode is just plain "sleep" instruction + * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh + * Standby Self-Refresh mode is above plus stopped clocks + */ +#define SUSP_MODE_SLEEP (SUSP_SH_SLEEP) +#define SUSP_MODE_SLEEP_SF (SUSP_SH_SLEEP | SUSP_SH_SF) +#define SUSP_MODE_STANDBY_SF (SUSP_SH_STANDBY | SUSP_SH_SF) + +/* + * The following modes are not there yet: + * + * R-standby mode is unsupported, but will be added in the future + * U-standby mode is low priority since it needs bootloader hacks + * + * All modes should be tied in with cpuidle. But before that can + * happen we need to keep track of enabled hardware blocks so we + * can avoid entering sleep modes that stop clocks to hardware + * blocks that are in use even though the cpu core is idle. + */ + +extern const unsigned char sh_mobile_standby[]; +extern const unsigned int sh_mobile_standby_size; + +static void sh_mobile_call_standby(unsigned long mode) +{ + extern void *vbr_base; + void *onchip_mem = (void *)0xe5200000; /* ILRAM */ + void (*standby_onchip_mem)(unsigned long) = onchip_mem; + + /* Note: Wake up from sleep may generate exceptions! + * Setup VBR to point to on-chip ram if self-refresh is + * going to be used. + */ + if (mode & SUSP_SH_SF) + asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory"); + + /* Copy the assembly snippet to the otherwise ununsed ILRAM */ + memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size); + wmb(); + ctrl_barrier(); + + /* Let assembly snippet in on-chip memory handle the rest */ + standby_onchip_mem(mode); + + /* Put VBR back in System RAM again */ + if (mode & SUSP_SH_SF) + asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory"); +} + +static int sh_pm_enter(suspend_state_t state) +{ + local_irq_disable(); + set_bl_bit(); + sh_mobile_call_standby(SUSP_MODE_STANDBY_SF); + local_irq_disable(); + clear_bl_bit(); + return 0; +} + +static struct platform_suspend_ops sh_pm_ops = { + .enter = sh_pm_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init sh_pm_init(void) +{ + suspend_set_ops(&sh_pm_ops); + return 0; +} + +late_initcall(sh_pm_init); diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S new file mode 100644 index 000000000000..5d888ef53d82 --- /dev/null +++ b/arch/sh/kernel/cpu/shmobile/sleep.S @@ -0,0 +1,125 @@ +/* + * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S + * + * Sleep mode and Standby modes support for SuperH Mobile + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sys.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/suspend.h> + +/* manage self-refresh and enter standby mode. + * this code will be copied to on-chip memory and executed from there. + */ + + .balign 4096,0,4096 +ENTRY(sh_mobile_standby) + mov r4, r0 + + tst #SUSP_SH_SF, r0 + bt skip_set_sf + + /* SDRAM: disable power down and put in self-refresh mode */ + mov.l 1f, r4 + mov.l 2f, r1 + mov.l @r4, r2 + or r1, r2 + mov.l 3f, r3 + and r3, r2 + mov.l r2, @r4 + +skip_set_sf: + tst #SUSP_SH_SLEEP, r0 + bt test_standby + + /* set mode to "sleep mode" */ + bra do_sleep + mov #0x00, r1 + +test_standby: + tst #SUSP_SH_STANDBY, r0 + bt test_rstandby + + /* set mode to "software standby mode" */ + bra do_sleep + mov #0x80, r1 + +test_rstandby: + tst #SUSP_SH_RSTANDBY, r0 + bt test_ustandby + + /* set mode to "r-standby mode" */ + bra do_sleep + mov #0x20, r1 + +test_ustandby: + tst #SUSP_SH_USTANDBY, r0 + bt done_sleep + + /* set mode to "u-standby mode" */ + mov #0x10, r1 + + /* fall-through */ + +do_sleep: + /* setup and enter selected standby mode */ + mov.l 5f, r4 + mov.l r1, @r4 + sleep + +done_sleep: + /* reset standby mode to sleep mode */ + mov.l 5f, r4 + mov #0x00, r1 + mov.l r1, @r4 + + tst #SUSP_SH_SF, r0 + bt skip_restore_sf + + /* SDRAM: set auto-refresh mode */ + mov.l 1f, r4 + mov.l @r4, r2 + mov.l 4f, r3 + and r3, r2 + mov.l r2, @r4 + mov.l 6f, r4 + mov.l 7f, r1 + mov.l 8f, r2 + mov.l @r4, r3 + mov #-1, r4 + add r4, r3 + or r2, r3 + mov.l r3, @r1 +skip_restore_sf: + rts + nop + + .balign 4 +1: .long 0xfe400008 /* SDCR0 */ +2: .long 0x00000400 +3: .long 0xffff7fff +4: .long 0xfffffbff +5: .long 0xa4150020 /* STBCR */ +6: .long 0xfe40001c /* RTCOR */ +7: .long 0xfe400018 /* RTCNT */ +8: .long 0xa55a0000 + +/* interrupt vector @ 0x600 */ + .balign 0x400,0,0x400 + .long 0xdeadbeef + .balign 0x200,0,0x200 + /* sh7722 will end up here in sleep mode */ + rte + nop +sh_mobile_standby_end: + +ENTRY(sh_mobile_standby_size) + .long sh_mobile_standby_end - sh_mobile_standby diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c index d37165361034..d22e5af699f9 100644 --- a/arch/sh/kernel/gpio.c +++ b/arch/sh/kernel/gpio.c @@ -19,36 +19,75 @@ #include <linux/bitops.h> #include <linux/gpio.h> -static struct pinmux_info *registered_gpio; +static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r) +{ + if (enum_id < r->begin) + return 0; -static struct pinmux_info *gpio_controller(unsigned gpio) + if (enum_id > r->end) + return 0; + + return 1; +} + +static unsigned long gpio_read_raw_reg(unsigned long reg, + unsigned long reg_width) { - if (!registered_gpio) - return NULL; + switch (reg_width) { + case 8: + return ctrl_inb(reg); + case 16: + return ctrl_inw(reg); + case 32: + return ctrl_inl(reg); + } - if (gpio < registered_gpio->first_gpio) - return NULL; + BUG(); + return 0; +} - if (gpio > registered_gpio->last_gpio) - return NULL; +static void gpio_write_raw_reg(unsigned long reg, + unsigned long reg_width, + unsigned long data) +{ + switch (reg_width) { + case 8: + ctrl_outb(data, reg); + return; + case 16: + ctrl_outw(data, reg); + return; + case 32: + ctrl_outl(data, reg); + return; + } - return registered_gpio; + BUG(); } -static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r) +static void gpio_write_bit(struct pinmux_data_reg *dr, + unsigned long in_pos, unsigned long value) { - if (enum_id < r->begin) - return 0; + unsigned long pos; - if (enum_id > r->end) - return 0; + pos = dr->reg_width - (in_pos + 1); - return 1; +#ifdef DEBUG + pr_info("write_bit addr = %lx, value = %ld, pos = %ld, " + "r_width = %ld\n", + dr->reg, !!value, pos, dr->reg_width); +#endif + + if (value) + set_bit(pos, &dr->reg_shadow); + else + clear_bit(pos, &dr->reg_shadow); + + gpio_write_raw_reg(dr->reg, dr->reg_width, dr->reg_shadow); } -static int read_write_reg(unsigned long reg, unsigned long reg_width, - unsigned long field_width, unsigned long in_pos, - unsigned long value, int do_write) +static int gpio_read_reg(unsigned long reg, unsigned long reg_width, + unsigned long field_width, unsigned long in_pos) { unsigned long data, mask, pos; @@ -57,52 +96,53 @@ static int read_write_reg(unsigned long reg, unsigned long reg_width, pos = reg_width - ((in_pos + 1) * field_width); #ifdef DEBUG - pr_info("%s, addr = %lx, value = %ld, pos = %ld, " + pr_info("read_reg: addr = %lx, pos = %ld, " "r_width = %ld, f_width = %ld\n", - do_write ? "write" : "read", reg, value, pos, - reg_width, field_width); + reg, pos, reg_width, field_width); #endif - switch (reg_width) { - case 8: - data = ctrl_inb(reg); - break; - case 16: - data = ctrl_inw(reg); - break; - case 32: - data = ctrl_inl(reg); - break; - } + data = gpio_read_raw_reg(reg, reg_width); + return (data >> pos) & mask; +} - if (!do_write) - return (data >> pos) & mask; +static void gpio_write_reg(unsigned long reg, unsigned long reg_width, + unsigned long field_width, unsigned long in_pos, + unsigned long value) +{ + unsigned long mask, pos; - data &= ~(mask << pos); - data |= value << pos; + mask = (1 << field_width) - 1; + pos = reg_width - ((in_pos + 1) * field_width); + +#ifdef DEBUG + pr_info("write_reg addr = %lx, value = %ld, pos = %ld, " + "r_width = %ld, f_width = %ld\n", + reg, value, pos, reg_width, field_width); +#endif + + mask = ~(mask << pos); + value = value << pos; switch (reg_width) { case 8: - ctrl_outb(data, reg); + ctrl_outb((ctrl_inb(reg) & mask) | value, reg); break; case 16: - ctrl_outw(data, reg); + ctrl_outw((ctrl_inw(reg) & mask) | value, reg); break; case 32: - ctrl_outl(data, reg); + ctrl_outl((ctrl_inl(reg) & mask) | value, reg); break; } - return 0; } -static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio, - struct pinmux_data_reg **drp, int *bitp) +static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio) { - pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id; + struct pinmux_gpio *gpiop = &gpioc->gpios[gpio]; struct pinmux_data_reg *data_reg; int k, n; - if (!enum_in_range(enum_id, &gpioc->data)) + if (!enum_in_range(gpiop->enum_id, &gpioc->data)) return -1; k = 0; @@ -113,19 +153,58 @@ static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio, break; for (n = 0; n < data_reg->reg_width; n++) { - if (data_reg->enum_ids[n] == enum_id) { - *drp = data_reg; - *bitp = n; + if (data_reg->enum_ids[n] == gpiop->enum_id) { + gpiop->flags &= ~PINMUX_FLAG_DREG; + gpiop->flags |= (k << PINMUX_FLAG_DREG_SHIFT); + gpiop->flags &= ~PINMUX_FLAG_DBIT; + gpiop->flags |= (n << PINMUX_FLAG_DBIT_SHIFT); return 0; - } } k++; } + BUG(); + return -1; } +static void setup_data_regs(struct pinmux_info *gpioc) +{ + struct pinmux_data_reg *drp; + int k; + + for (k = gpioc->first_gpio; k <= gpioc->last_gpio; k++) + setup_data_reg(gpioc, k); + + k = 0; + while (1) { + drp = gpioc->data_regs + k; + + if (!drp->reg_width) + break; + + drp->reg_shadow = gpio_read_raw_reg(drp->reg, drp->reg_width); + k++; + } +} + +static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio, + struct pinmux_data_reg **drp, int *bitp) +{ + struct pinmux_gpio *gpiop = &gpioc->gpios[gpio]; + int k, n; + + if (!enum_in_range(gpiop->enum_id, &gpioc->data)) + return -1; + + k = (gpiop->flags & PINMUX_FLAG_DREG) >> PINMUX_FLAG_DREG_SHIFT; + n = (gpiop->flags & PINMUX_FLAG_DBIT) >> PINMUX_FLAG_DBIT_SHIFT; + *drp = gpioc->data_regs + k; + *bitp = n; + return 0; +} + static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id, struct pinmux_cfg_reg **crp, int *indexp, unsigned long **cntp) @@ -187,9 +266,9 @@ static int get_gpio_enum_id(struct pinmux_info *gpioc, unsigned gpio, return -1; } -static int write_config_reg(struct pinmux_info *gpioc, - struct pinmux_cfg_reg *crp, - int index) +static void write_config_reg(struct pinmux_info *gpioc, + struct pinmux_cfg_reg *crp, + int index) { unsigned long ncomb, pos, value; @@ -197,8 +276,7 @@ static int write_config_reg(struct pinmux_info *gpioc, pos = index / ncomb; value = index % ncomb; - return read_write_reg(crp->reg, crp->reg_width, - crp->field_width, pos, value, 1); + gpio_write_reg(crp->reg, crp->reg_width, crp->field_width, pos, value); } static int check_config_reg(struct pinmux_info *gpioc, @@ -211,8 +289,8 @@ static int check_config_reg(struct pinmux_info *gpioc, pos = index / ncomb; value = index % ncomb; - if (read_write_reg(crp->reg, crp->reg_width, - crp->field_width, pos, 0, 0) == value) + if (gpio_read_reg(crp->reg, crp->reg_width, + crp->field_width, pos) == value) return 0; return -1; @@ -220,8 +298,8 @@ static int check_config_reg(struct pinmux_info *gpioc, enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE }; -int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, - int pinmux_type, int cfg_mode) +static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, + int pinmux_type, int cfg_mode) { struct pinmux_cfg_reg *cr = NULL; pinmux_enum_t enum_id; @@ -287,8 +365,7 @@ int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, break; case GPIO_CFG_REQ: - if (write_config_reg(gpioc, cr, index) != 0) - goto out_err; + write_config_reg(gpioc, cr, index); *cntp = *cntp + 1; break; @@ -305,9 +382,14 @@ int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, static DEFINE_SPINLOCK(gpio_lock); -int __gpio_request(unsigned gpio) +static struct pinmux_info *chip_to_pinmux(struct gpio_chip *chip) { - struct pinmux_info *gpioc = gpio_controller(gpio); + return container_of(chip, struct pinmux_info, chip); +} + +static int sh_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct pinmux_info *gpioc = chip_to_pinmux(chip); struct pinmux_data_reg *dummy; unsigned long flags; int i, ret, pinmux_type; @@ -319,29 +401,30 @@ int __gpio_request(unsigned gpio) spin_lock_irqsave(&gpio_lock, flags); - if ((gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE) + if ((gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE) goto err_unlock; /* setup pin function here if no data is associated with pin */ - if (get_data_reg(gpioc, gpio, &dummy, &i) != 0) + if (get_data_reg(gpioc, offset, &dummy, &i) != 0) pinmux_type = PINMUX_TYPE_FUNCTION; else pinmux_type = PINMUX_TYPE_GPIO; if (pinmux_type == PINMUX_TYPE_FUNCTION) { - if (pinmux_config_gpio(gpioc, gpio, + if (pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_DRYRUN) != 0) goto err_unlock; - if (pinmux_config_gpio(gpioc, gpio, + if (pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_REQ) != 0) BUG(); } - gpioc->gpios[gpio].flags = pinmux_type; + gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE; + gpioc->gpios[offset].flags |= pinmux_type; ret = 0; err_unlock: @@ -349,11 +432,10 @@ int __gpio_request(unsigned gpio) err_out: return ret; } -EXPORT_SYMBOL(__gpio_request); -void gpio_free(unsigned gpio) +static void sh_gpio_free(struct gpio_chip *chip, unsigned offset) { - struct pinmux_info *gpioc = gpio_controller(gpio); + struct pinmux_info *gpioc = chip_to_pinmux(chip); unsigned long flags; int pinmux_type; @@ -362,20 +444,23 @@ void gpio_free(unsigned gpio) spin_lock_irqsave(&gpio_lock, flags); - pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE; - pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE); - gpioc->gpios[gpio].flags = PINMUX_TYPE_NONE; + pinmux_type = gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE; + pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_FREE); + gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE; + gpioc->gpios[offset].flags |= PINMUX_TYPE_NONE; spin_unlock_irqrestore(&gpio_lock, flags); } -EXPORT_SYMBOL(gpio_free); static int pinmux_direction(struct pinmux_info *gpioc, unsigned gpio, int new_pinmux_type) { - int ret, pinmux_type; + int pinmux_type; + int ret = -EINVAL; + + if (!gpioc) + goto err_out; - ret = -EINVAL; pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE; switch (pinmux_type) { @@ -401,102 +486,99 @@ static int pinmux_direction(struct pinmux_info *gpioc, GPIO_CFG_REQ) != 0) BUG(); - gpioc->gpios[gpio].flags = new_pinmux_type; + gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE; + gpioc->gpios[gpio].flags |= new_pinmux_type; ret = 0; err_out: return ret; } -int gpio_direction_input(unsigned gpio) +static int sh_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - struct pinmux_info *gpioc = gpio_controller(gpio); + struct pinmux_info *gpioc = chip_to_pinmux(chip); unsigned long flags; - int ret = -EINVAL; - - if (!gpioc) - goto err_out; + int ret; spin_lock_irqsave(&gpio_lock, flags); - ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_INPUT); + ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_INPUT); spin_unlock_irqrestore(&gpio_lock, flags); - err_out: + return ret; } -EXPORT_SYMBOL(gpio_direction_input); -static int __gpio_get_set_value(struct pinmux_info *gpioc, - unsigned gpio, int value, - int do_write) +static void sh_gpio_set_value(struct pinmux_info *gpioc, + unsigned gpio, int value) { struct pinmux_data_reg *dr = NULL; int bit = 0; - if (get_data_reg(gpioc, gpio, &dr, &bit) != 0) + if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) BUG(); else - value = read_write_reg(dr->reg, dr->reg_width, - 1, bit, !!value, do_write); - - return value; + gpio_write_bit(dr, bit, value); } -int gpio_direction_output(unsigned gpio, int value) +static int sh_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) { - struct pinmux_info *gpioc = gpio_controller(gpio); + struct pinmux_info *gpioc = chip_to_pinmux(chip); unsigned long flags; - int ret = -EINVAL; - - if (!gpioc) - goto err_out; + int ret; + sh_gpio_set_value(gpioc, offset, value); spin_lock_irqsave(&gpio_lock, flags); - __gpio_get_set_value(gpioc, gpio, value, 1); - ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT); + ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_OUTPUT); spin_unlock_irqrestore(&gpio_lock, flags); - err_out: + return ret; } -EXPORT_SYMBOL(gpio_direction_output); -int gpio_get_value(unsigned gpio) +static int sh_gpio_get_value(struct pinmux_info *gpioc, unsigned gpio) { - struct pinmux_info *gpioc = gpio_controller(gpio); - unsigned long flags; - int value = 0; + struct pinmux_data_reg *dr = NULL; + int bit = 0; - if (!gpioc) + if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) { BUG(); - else { - spin_lock_irqsave(&gpio_lock, flags); - value = __gpio_get_set_value(gpioc, gpio, 0, 0); - spin_unlock_irqrestore(&gpio_lock, flags); + return 0; } - return value; + return gpio_read_reg(dr->reg, dr->reg_width, 1, bit); } -EXPORT_SYMBOL(gpio_get_value); -void gpio_set_value(unsigned gpio, int value) +static int sh_gpio_get(struct gpio_chip *chip, unsigned offset) { - struct pinmux_info *gpioc = gpio_controller(gpio); - unsigned long flags; + return sh_gpio_get_value(chip_to_pinmux(chip), offset); +} - if (!gpioc) - BUG(); - else { - spin_lock_irqsave(&gpio_lock, flags); - __gpio_get_set_value(gpioc, gpio, value, 1); - spin_unlock_irqrestore(&gpio_lock, flags); - } +static void sh_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + sh_gpio_set_value(chip_to_pinmux(chip), offset, value); } -EXPORT_SYMBOL(gpio_set_value); int register_pinmux(struct pinmux_info *pip) { - registered_gpio = pip; - pr_info("pinmux: %s handling gpio %d -> %d\n", + struct gpio_chip *chip = &pip->chip; + + pr_info("sh pinmux: %s handling gpio %d -> %d\n", pip->name, pip->first_gpio, pip->last_gpio); - return 0; + setup_data_regs(pip); + + chip->request = sh_gpio_request; + chip->free = sh_gpio_free; + chip->direction_input = sh_gpio_direction_input; + chip->get = sh_gpio_get; + chip->direction_output = sh_gpio_direction_output; + chip->set = sh_gpio_set; + + WARN_ON(pip->first_gpio != 0); /* needs testing */ + + chip->label = pip->name; + chip->owner = THIS_MODULE; + chip->base = pip->first_gpio; + chip->ngpio = (pip->last_gpio - pip->first_gpio) + 1; + + return gpiochip_add(chip); } diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 64b7690c664c..90d63aefd275 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -106,7 +106,7 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) } #endif - irq = irq_demux(evt2irq(irq)); + irq = irq_demux(intc_evt2irq(irq)); #ifdef CONFIG_IRQSTACKS curctx = (union irq_ctx *)current_thread_info(); diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 94df56b0d1f6..7ea2704ea033 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -14,21 +14,22 @@ #include <linux/delay.h> #include <linux/reboot.h> #include <linux/numa.h> +#include <linux/ftrace.h> +#include <linux/suspend.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/io.h> #include <asm/cacheflush.h> -typedef NORET_TYPE void (*relocate_new_kernel_t)( - unsigned long indirection_page, - unsigned long reboot_code_buffer, - unsigned long start_address, - unsigned long vbr_reg) ATTRIB_NORET; +typedef void (*relocate_new_kernel_t)(unsigned long indirection_page, + unsigned long reboot_code_buffer, + unsigned long start_address); extern const unsigned char relocate_new_kernel[]; extern const unsigned int relocate_new_kernel_size; extern void *gdb_vbr_vector; +extern void *vbr_base; void machine_shutdown(void) { @@ -45,6 +46,12 @@ void machine_crash_shutdown(struct pt_regs *regs) */ int machine_kexec_prepare(struct kimage *image) { + /* older versions of kexec-tools are passing + * the zImage entry point as a virtual address. + */ + if (image->start != PHYSADDR(image->start)) + return -EINVAL; /* upgrade your kexec-tools */ + return 0; } @@ -73,17 +80,33 @@ static void kexec_info(struct kimage *image) */ void machine_kexec(struct kimage *image) { - unsigned long page_list; unsigned long reboot_code_buffer; - unsigned long vbr_reg; relocate_new_kernel_t rnk; + unsigned long entry; + unsigned long *ptr; + int save_ftrace_enabled; + + /* + * Nicked from the mips version of machine_kexec(): + * The generic kexec code builds a page list with physical + * addresses. Use phys_to_virt() to convert them to virtual. + */ + for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE); + ptr = (entry & IND_INDIRECTION) ? + phys_to_virt(entry & PAGE_MASK) : ptr + 1) { + if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION || + *ptr & IND_DESTINATION) + *ptr = (unsigned long) phys_to_virt(*ptr); + } -#if defined(CONFIG_SH_STANDARD_BIOS) - vbr_reg = ((unsigned long )gdb_vbr_vector) - 0x100; -#else - vbr_reg = 0x80000000; // dummy +#ifdef CONFIG_KEXEC_JUMP + if (image->preserve_context) + save_processor_state(); #endif + + save_ftrace_enabled = __ftrace_enabled_save(); + /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); @@ -97,12 +120,37 @@ void machine_kexec(struct kimage *image) memcpy((void *)reboot_code_buffer, relocate_new_kernel, relocate_new_kernel_size); - kexec_info(image); + kexec_info(image); flush_cache_all(); +#if defined(CONFIG_SH_STANDARD_BIOS) + asm volatile("ldc %0, vbr" : + : "r" (((unsigned long) gdb_vbr_vector) - 0x100) + : "memory"); +#endif + /* now call it */ rnk = (relocate_new_kernel_t) reboot_code_buffer; - (*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg); + (*rnk)(page_list, reboot_code_buffer, + (unsigned long)phys_to_virt(image->start)); + +#ifdef CONFIG_KEXEC_JUMP + asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory"); + + if (image->preserve_context) + restore_processor_state(); + + /* Convert page list back to physical addresses, what a mess. */ + for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE); + ptr = (*ptr & IND_INDIRECTION) ? + phys_to_virt(*ptr & PAGE_MASK) : ptr + 1) { + if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION || + *ptr & IND_DESTINATION) + *ptr = virt_to_phys(*ptr); + } +#endif + + __ftrace_enabled_restore(save_ftrace_enabled); } void arch_crash_save_vmcoreinfo(void) diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S index c66cb3209db5..fcc9934fb97b 100644 --- a/arch/sh/kernel/relocate_kernel.S +++ b/arch/sh/kernel/relocate_kernel.S @@ -4,6 +4,8 @@ * * LANDISK/sh4 is supported. Maybe, SH archtecture works well. * + * 2009-03-18 Magnus Damm - Added Kexec Jump support + * * This source code is licensed under the GNU General Public License, * Version 2. See the file COPYING for more details. */ @@ -16,23 +18,141 @@ relocate_new_kernel: /* r4 = indirection_page */ /* r5 = reboot_code_buffer */ /* r6 = start_address */ - /* r7 = vbr_reg */ - mov.l 10f,r8 /* PAGE_SIZE */ - mov.l 11f,r9 /* P2SEG */ + mov.l 10f, r0 /* PAGE_SIZE */ + add r5, r0 /* setup new stack at end of control page */ + + /* save r15->r8 to new stack */ + mov.l r15, @-r0 + mov r0, r15 + mov.l r14, @-r15 + mov.l r13, @-r15 + mov.l r12, @-r15 + mov.l r11, @-r15 + mov.l r10, @-r15 + mov.l r9, @-r15 + mov.l r8, @-r15 + + /* save other random registers */ + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + stc.l ssr, @-r15 + stc.l sr, @-r15 + sts.l pr, @-r15 + stc.l spc, @-r15 + + /* switch to bank1 and save r7->r0 */ + mov.l 12f, r9 + stc sr, r8 + or r9, r8 + ldc r8, sr + mov.l r7, @-r15 + mov.l r6, @-r15 + mov.l r5, @-r15 + mov.l r4, @-r15 + mov.l r3, @-r15 + mov.l r2, @-r15 + mov.l r1, @-r15 + mov.l r0, @-r15 + + /* switch to bank0 and save r7->r0 */ + mov.l 12f, r9 + not r9, r9 + stc sr, r8 + and r9, r8 + ldc r8, sr + mov.l r7, @-r15 + mov.l r6, @-r15 + mov.l r5, @-r15 + mov.l r4, @-r15 + mov.l r3, @-r15 + mov.l r2, @-r15 + mov.l r1, @-r15 + mov.l r0, @-r15 + + mov.l r4, @-r15 /* save indirection page again */ + + bsr swap_pages /* swap pages before jumping to new kernel */ + nop + + mova 11f, r0 + mov.l r15, @r0 /* save pointer to stack */ + + jsr @r6 /* hand over control to new kernel */ + nop + + mov.l 11f, r15 /* get pointer to stack */ + mov.l @r15+, r4 /* restore r4 to get indirection page */ - /* stack setting */ - add r8,r5 - mov r5,r15 + bsr swap_pages /* swap pages back to previous state */ + nop + /* make sure bank0 is active and restore r0->r7 */ + mov.l 12f, r9 + not r9, r9 + stc sr, r8 + and r9, r8 + ldc r8, sr + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + + /* switch to bank1 and restore r0->r7 */ + mov.l 12f, r9 + stc sr, r8 + or r9, r8 + ldc r8, sr + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + + /* switch back to bank0 */ + mov.l 12f, r9 + not r9, r9 + stc sr, r8 + and r9, r8 + ldc r8, sr + + /* restore other random registers */ + ldc.l @r15+, spc + lds.l @r15+, pr + ldc.l @r15+, sr + ldc.l @r15+, ssr + ldc.l @r15+, gbr + lds.l @r15+, mach + lds.l @r15+, macl + + /* restore r8->r15 */ + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + mov.l @r15+, r15 + rts + nop + +swap_pages: bra 1f - mov r4,r0 /* cmd = indirection_page */ + mov r4,r0 /* cmd = indirection_page */ 0: mov.l @r4+,r0 /* cmd = *ind++ */ -1: /* addr = (cmd | P2SEG) & 0xfffffff0 */ +1: /* addr = cmd & 0xfffffff0 */ mov r0,r2 - or r9,r2 mov #-16,r1 and r1,r2 @@ -40,57 +160,70 @@ relocate_new_kernel: tst #1,r0 bt 2f bra 0b - mov r2,r5 + mov r2,r5 2: /* else if(cmd & IND_INDIRECTION) ind = addr */ tst #2,r0 bt 3f bra 0b - mov r2,r4 + mov r2,r4 -3: /* else if(cmd & IND_DONE) goto 6 */ +3: /* else if(cmd & IND_DONE) return */ tst #4,r0 bt 4f - bra 6f - nop + rts + nop 4: /* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */ tst #8,r0 bt 0b - mov r8,r3 + mov.l 10f,r3 /* PAGE_SIZE */ shlr2 r3 shlr2 r3 5: dt r3 - mov.l @r2+,r1 /* 16n+0 */ - mov.l r1,@r5 - add #4,r5 - mov.l @r2+,r1 /* 16n+4 */ - mov.l r1,@r5 - add #4,r5 - mov.l @r2+,r1 /* 16n+8 */ - mov.l r1,@r5 - add #4,r5 - mov.l @r2+,r1 /* 16n+12 */ - mov.l r1,@r5 - add #4,r5 + + /* regular kexec just overwrites the destination page + * with the contents of the source page. + * for the kexec jump case we need to swap the contents + * of the pages. + * to keep it simple swap the contents for both cases. + */ + mov.l @(0, r2), r8 + mov.l @(0, r5), r1 + mov.l r8, @(0, r5) + mov.l r1, @(0, r2) + + mov.l @(4, r2), r8 + mov.l @(4, r5), r1 + mov.l r8, @(4, r5) + mov.l r1, @(4, r2) + + mov.l @(8, r2), r8 + mov.l @(8, r5), r1 + mov.l r8, @(8, r5) + mov.l r1, @(8, r2) + + mov.l @(12, r2), r8 + mov.l @(12, r5), r1 + mov.l r8, @(12, r5) + mov.l r1, @(12, r2) + + add #16,r5 + add #16,r2 bf 5b bra 0b - nop -6: -#ifdef CONFIG_SH_STANDARD_BIOS - ldc r7, vbr -#endif - jmp @r6 - nop + nop .align 2 10: .long PAGE_SIZE 11: - .long P2SEG + .long 0 +12: + .long 0x20000000 ! RB=1 relocate_new_kernel_end: diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 370d2cfa34eb..24c60251f680 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -432,6 +432,7 @@ static const char *cpu_name[] = { [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", + [CPU_SH7786] = "SH7786", [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", @@ -448,7 +449,7 @@ EXPORT_SYMBOL(get_cpu_subtype); /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ static const char *cpu_flags[] = { "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", - "ptea", "llsc", "l2", "op32", NULL + "ptea", "llsc", "l2", "op32", "pteaex", NULL }; static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c) diff --git a/arch/sh/kernel/swsusp.c b/arch/sh/kernel/swsusp.c new file mode 100644 index 000000000000..12b64a0f2f01 --- /dev/null +++ b/arch/sh/kernel/swsusp.c @@ -0,0 +1,38 @@ +/* + * swsusp.c - SuperH hibernation support + * + * Copyright (C) 2009 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/suspend.h> +#include <asm/suspend.h> +#include <asm/sections.h> +#include <asm/tlbflush.h> +#include <asm/page.h> +#include <asm/fpu.h> + +struct swsusp_arch_regs swsusp_arch_regs_cpu0; + +int pfn_is_nosave(unsigned long pfn) +{ + unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT; + unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT; + + return (pfn >= begin_pfn) && (pfn < end_pfn); +} + +void save_processor_state(void) +{ + init_fpu(current); +} + +void restore_processor_state(void) +{ + local_flush_tlb_all(); +} diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 8457f83242c5..c34e1e0f9b02 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -41,14 +41,6 @@ static int null_rtc_set_time(const time_t secs) return 0; } -/* - * Null high precision timer functions for systems lacking one. - */ -static cycle_t null_hpt_read(void) -{ - return 0; -} - void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; @@ -112,7 +104,6 @@ int do_settimeofday(struct timespec *tv) EXPORT_SYMBOL(do_settimeofday); #endif /* !CONFIG_GENERIC_TIME */ -#ifndef CONFIG_GENERIC_CLOCKEVENTS /* last time the RTC clock got updated */ static long last_rtc_update; @@ -156,7 +147,6 @@ void handle_timer_tick(void) update_process_times(user_mode(get_irq_regs())); #endif } -#endif /* !CONFIG_GENERIC_CLOCKEVENTS */ #ifdef CONFIG_PM int timer_suspend(struct sys_device *dev, pm_message_t state) @@ -189,7 +179,12 @@ static struct sysdev_class timer_sysclass = { static int __init timer_init_sysfs(void) { - int ret = sysdev_class_register(&timer_sysclass); + int ret; + + if (!sys_timer) + return 0; + + ret = sysdev_class_register(&timer_sysclass); if (ret != 0) return ret; @@ -200,42 +195,21 @@ device_initcall(timer_init_sysfs); void (*board_time_init)(void); -/* - * Shamelessly based on the MIPS and Sparc64 work. - */ -static unsigned long timer_ticks_per_nsec_quotient __read_mostly; -unsigned long sh_hpt_frequency = 0; - -#define NSEC_PER_CYC_SHIFT 10 - -static struct clocksource clocksource_sh = { +struct clocksource clocksource_sh = { .name = "SuperH", - .rating = 200, - .mask = CLOCKSOURCE_MASK(32), - .read = null_hpt_read, - .shift = 16, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init init_sh_clocksource(void) -{ - if (!sh_hpt_frequency || clocksource_sh.read == null_hpt_read) - return; - - clocksource_sh.mult = clocksource_hz2mult(sh_hpt_frequency, - clocksource_sh.shift); - - timer_ticks_per_nsec_quotient = - clocksource_hz2mult(sh_hpt_frequency, NSEC_PER_CYC_SHIFT); - - clocksource_register(&clocksource_sh); -} - #ifdef CONFIG_GENERIC_TIME unsigned long long sched_clock(void) { - unsigned long long ticks = clocksource_sh.read(); - return (ticks * timer_ticks_per_nsec_quotient) >> NSEC_PER_CYC_SHIFT; + unsigned long long cycles; + + /* jiffies based sched_clock if no clocksource is installed */ + if (!clocksource_sh.rating) + return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); + + cycles = clocksource_sh.read(); + return cyc2ns(&clocksource_sh, cycles); } #endif @@ -259,17 +233,8 @@ void __init time_init(void) * initialized for us. */ sys_timer = get_sys_timer(); - printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); - - - if (sys_timer->ops->read) - clocksource_sh.read = sys_timer->ops->read; - - init_sh_clocksource(); - - if (sh_hpt_frequency) - printk("Using %lu.%03lu MHz high precision timer.\n", - ((sh_hpt_frequency + 500) / 1000) / 1000, - ((sh_hpt_frequency + 500) / 1000) % 1000); + if (unlikely(!sys_timer)) + panic("System timer missing.\n"); + printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); } diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c index c3d237e1d566..9a77ae86b403 100644 --- a/arch/sh/kernel/timers/timer-mtu2.c +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -35,7 +35,8 @@ #define MTU2_TSR_1 0xfffe4385 #define MTU2_TCNT_1 0xfffe4386 /* 16-bit counter */ -#if defined(CONFIG_CPU_SUBTYPE_SH7201) +#if defined(CONFIG_CPU_SUBTYPE_SH7201) || \ + defined(CONFIG_CPU_SUBTYPE_SH7203) #define MTU2_TGRA_1 0xfffe4388 #else #define MTU2_TGRA_1 0xfffe438a diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 0db3f9510336..10b5a6f17cc0 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -146,7 +146,14 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dummy) _tmu_clear_status(TMU0); _tmu_set_irq(TMU0,tmu0_clockevent.mode != CLOCK_EVT_MODE_ONESHOT); - evt->event_handler(evt); + switch (tmu0_clockevent.mode) { + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_PERIODIC: + evt->event_handler(evt); + break; + default: + break; + } return IRQ_HANDLED; } @@ -237,6 +244,7 @@ static int tmu_timer_init(void) !defined(CONFIG_CPU_SUBTYPE_SH7721) && \ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7786) && \ !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); #endif @@ -254,7 +262,14 @@ static int tmu_timer_init(void) _tmu_start(TMU1); - sh_hpt_frequency = clk_get_rate(&tmu1_clk); + clocksource_sh.rating = 200; + clocksource_sh.mask = CLOCKSOURCE_MASK(32); + clocksource_sh.read = tmu_timer_read; + clocksource_sh.shift = 10; + clocksource_sh.mult = clocksource_hz2mult(clk_get_rate(&tmu1_clk), + clocksource_sh.shift); + clocksource_sh.flags = CLOCK_SOURCE_IS_CONTINUOUS; + clocksource_register(&clocksource_sh); tmu0_clockevent.mult = div_sc(frequency, NSEC_PER_SEC, tmu0_clockevent.shift); @@ -264,6 +279,7 @@ static int tmu_timer_init(void) clockevent_delta2ns(1, &tmu0_clockevent); tmu0_clockevent.cpumask = cpumask_of(0); + tmu0_clockevent.rating = 100; clockevents_register_device(&tmu0_clockevent); @@ -274,7 +290,6 @@ static struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, - .read = tmu_timer_read, }; struct sys_timer tmu_timer = { diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index 7b4b82bd1156..d0b2a715cd14 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -15,7 +15,10 @@ OUTPUT_ARCH(sh) ENTRY(_start) SECTIONS { -#ifdef CONFIG_32BIT +#ifdef CONFIG_PMB_FIXED + . = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) + + CONFIG_ZERO_PAGE_OFFSET; +#elif defined(CONFIG_32BIT) . = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET; #else . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 555ec9714b9e..10c24356d2d5 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -57,7 +57,7 @@ config 32BIT bool default y if CPU_SH5 -config PMB +config PMB_ENABLE bool "Support 32-bit physical addressing through PMB" depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) select 32BIT @@ -67,6 +67,33 @@ config PMB 32-bits through the SH-4A PMB. If this is not set, legacy 29-bit physical addressing will be used. +choice + prompt "PMB handling type" + depends on PMB_ENABLE + default PMB_FIXED + +config PMB + bool "PMB" + depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) + select 32BIT + help + If you say Y here, physical addressing will be extended to + 32-bits through the SH-4A PMB. If this is not set, legacy + 29-bit physical addressing will be used. + +config PMB_FIXED + bool "fixed PMB" + depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || \ + CPU_SUBTYPE_SH7785) + select 32BIT + help + If this option is enabled, fixed PMB mappings are inherited + from the boot loader, and the kernel does not attempt dynamic + management. This is the closest to legacy 29-bit physical mode, + and allows systems to support up to 512MiB of system memory. + +endchoice + config X2TLB bool "Enable extended TLB mode" depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 index cb2f3f299591..986a1e055834 100644 --- a/arch/sh/mm/Makefile_32 +++ b/arch/sh/mm/Makefile_32 @@ -25,8 +25,10 @@ obj-$(CONFIG_CPU_SH4) += cache-debugfs.o endif ifdef CONFIG_MMU -obj-$(CONFIG_CPU_SH3) += tlb-sh3.o -obj-$(CONFIG_CPU_SH4) += tlb-sh4.o +tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o +tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o +tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o +obj-y += $(tlb-y) ifndef CONFIG_CACHE_OFF obj-$(CONFIG_CPU_SH4) += pg-sh4.o obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o @@ -35,6 +37,7 @@ endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PMB) += pmb.o +obj-$(CONFIG_PMB_FIXED) += pmb-fixed.o obj-$(CONFIG_NUMA) += numa.o EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/asids-debugfs.c b/arch/sh/mm/asids-debugfs.c index 8e912a15e94f..cd8c3bf39b5a 100644 --- a/arch/sh/mm/asids-debugfs.c +++ b/arch/sh/mm/asids-debugfs.c @@ -37,10 +37,8 @@ static int asids_seq_show(struct seq_file *file, void *iter) continue; if (p->mm) - seq_printf(file, "%5d : %02lx\n", pid, + seq_printf(file, "%5d : %04lx\n", pid, cpu_asid(smp_processor_id(), p->mm)); - else - seq_printf(file, "%5d : (none)\n", pid); } read_unlock(&tasklist_lock); diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index 32946fba123e..60cc486d2c2c 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -59,11 +59,13 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr)) return (void __iomem *)phys_addr; +#if !defined(CONFIG_PMB_FIXED) /* * Don't allow anybody to remap normal RAM that we're using.. */ if (phys_addr < virt_to_phys(high_memory)) return NULL; +#endif /* * Mappings have to be page-aligned @@ -81,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, area->phys_addr = phys_addr; orig_addr = addr = (unsigned long)area->addr; -#ifdef CONFIG_32BIT +#ifdef CONFIG_PMB /* * First try to remap through the PMB once a valid VMA has been * established. Smaller allocations (or the rest of the size @@ -119,10 +121,10 @@ void __iounmap(void __iomem *addr) unsigned long seg = PXSEG(vaddr); struct vm_struct *p; - if (seg < P3SEG || seg >= P3_ADDR_MAX || is_pci_memaddr(vaddr)) + if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr)) return; -#ifdef CONFIG_32BIT +#ifdef CONFIG_PMB /* * Purge any PMB entries that may have been established for this * mapping, then proceed with conventional VMA teardown. diff --git a/arch/sh/mm/pmb-fixed.c b/arch/sh/mm/pmb-fixed.c new file mode 100644 index 000000000000..43c8eac4d8a1 --- /dev/null +++ b/arch/sh/mm/pmb-fixed.c @@ -0,0 +1,45 @@ +/* + * arch/sh/mm/fixed_pmb.c + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <asm/mmu.h> +#include <asm/mmu_context.h> + +static int __uses_jump_to_uncached fixed_pmb_init(void) +{ + int i; + unsigned long addr, data; + + jump_to_uncached(); + + for (i = 0; i < PMB_ENTRY_MAX; i++) { + addr = PMB_DATA + (i << PMB_E_SHIFT); + data = ctrl_inl(addr); + if (!(data & PMB_V)) + continue; + + if (data & PMB_C) { +#if defined(CONFIG_CACHE_WRITETHROUGH) + data |= PMB_WT; +#elif defined(CONFIG_CACHE_WRITEBACK) + data &= ~PMB_WT; +#else + data &= ~(PMB_C | PMB_WT); +#endif + } + ctrl_outl(data, addr); + } + + back_to_cached(); + + return 0; +} +arch_initcall(fixed_pmb_init); diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 84241676265e..b1a714a92b14 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -15,6 +15,8 @@ */ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/bitops.h> @@ -402,3 +404,39 @@ static int __init pmb_debugfs_init(void) return 0; } postcore_initcall(pmb_debugfs_init); + +#ifdef CONFIG_PM +static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state) +{ + static pm_message_t prev_state; + + /* Restore the PMB after a resume from hibernation */ + if (state.event == PM_EVENT_ON && + prev_state.event == PM_EVENT_FREEZE) { + struct pmb_entry *pmbe; + spin_lock_irq(&pmb_list_lock); + for (pmbe = pmb_list; pmbe; pmbe = pmbe->next) + set_pmb_entry(pmbe); + spin_unlock_irq(&pmb_list_lock); + } + prev_state = state; + return 0; +} + +static int pmb_sysdev_resume(struct sys_device *dev) +{ + return pmb_sysdev_suspend(dev, PMSG_ON); +} + +static struct sysdev_driver pmb_sysdev_driver = { + .suspend = pmb_sysdev_suspend, + .resume = pmb_sysdev_resume, +}; + +static int __init pmb_sysdev_init(void) +{ + return sysdev_driver_register(&cpu_sysdev_class, &pmb_sysdev_driver); +} + +subsys_initcall(pmb_sysdev_init); +#endif diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c new file mode 100644 index 000000000000..2aab3ea934d7 --- /dev/null +++ b/arch/sh/mm/tlb-pteaex.c @@ -0,0 +1,96 @@ +/* + * arch/sh/mm/tlb-pteaex.c + * + * TLB operations for SH-X3 CPUs featuring PTE ASID Extensions. + * + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <asm/system.h> +#include <asm/mmu_context.h> +#include <asm/cacheflush.h> + +void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte) +{ + unsigned long flags; + unsigned long pteval; + unsigned long vpn; + + /* Ptrace may call this routine. */ + if (vma && current->active_mm != vma->vm_mm) + return; + +#ifndef CONFIG_CACHE_OFF + { + unsigned long pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + + if (!test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } + } + } +#endif + + local_irq_save(flags); + + /* Set PTEH register */ + vpn = address & MMU_VPN_MASK; + __raw_writel(vpn, MMU_PTEH); + + /* Set PTEAEX */ + __raw_writel(get_asid(), MMU_PTEAEX); + + pteval = pte.pte_low; + + /* Set PTEA register */ +#ifdef CONFIG_X2TLB + /* + * For the extended mode TLB this is trivial, only the ESZ and + * EPR bits need to be written out to PTEA, with the remainder of + * the protection bits (with the exception of the compat-mode SZ + * and PR bits, which are cleared) being written out in PTEL. + */ + __raw_writel(pte.pte_high, MMU_PTEA); +#endif + + /* Set PTEL register */ + pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ +#ifdef CONFIG_CACHE_WRITETHROUGH + pteval |= _PAGE_WT; +#endif + /* conveniently, we want all the software flags to be 0 anyway */ + __raw_writel(pteval, MMU_PTEL); + + /* Load the TLB */ + asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); + local_irq_restore(flags); +} + +/* + * While SH-X2 extended TLB mode splits out the memory-mapped I/UTLB + * data arrays, SH-X3 cores with PTEAEX split out the memory-mapped + * address arrays. In compat mode the second array is inaccessible, while + * in extended mode, the legacy 8-bit ASID field in address array 1 has + * undefined behaviour. + */ +void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid, + unsigned long page) +{ + jump_to_uncached(); + __raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT); + __raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT); + back_to_cached(); +} diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c index 1d97d64cb95f..1b9d4304b3bf 100644 --- a/arch/sh/oprofile/common.c +++ b/arch/sh/oprofile/common.c @@ -107,6 +107,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_SH7780: case CPU_SH7781: case CPU_SH7785: + case CPU_SH7786: case CPU_SH7723: case CPU_SHX3: lmodel = &op_model_sh4a_ops; diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 284b7e867496..8477b5d884fd 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -52,3 +52,6 @@ RSK7203 SH_RSK7203 AP325RXA SH_AP325RXA SH7763RDP SH_SH7763RDP SH7785LCR SH_SH7785LCR +URQUELL SH_URQUELL +ESPT SH_ESPT +POLARIS SH_POLARIS diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 903de4aa5094..ebe7deedd5b4 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o +obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o @@ -19,3 +20,5 @@ salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o + +aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o diff --git a/arch/x86/crypto/aes-i586-asm_32.S b/arch/x86/crypto/aes-i586-asm_32.S index e41b147f4509..b949ec2f9af4 100644 --- a/arch/x86/crypto/aes-i586-asm_32.S +++ b/arch/x86/crypto/aes-i586-asm_32.S @@ -41,14 +41,14 @@ #define tlen 1024 // length of each of 4 'xor' arrays (256 32-bit words) /* offsets to parameters with one register pushed onto stack */ -#define tfm 8 +#define ctx 8 #define out_blk 12 #define in_blk 16 -/* offsets in crypto_tfm structure */ -#define klen (crypto_tfm_ctx_offset + 0) -#define ekey (crypto_tfm_ctx_offset + 4) -#define dkey (crypto_tfm_ctx_offset + 244) +/* offsets in crypto_aes_ctx structure */ +#define klen (480) +#define ekey (0) +#define dkey (240) // register mapping for encrypt and decrypt subroutines @@ -217,7 +217,7 @@ do_col (table, r5,r0,r1,r4, r2,r3); /* idx=r5 */ // AES (Rijndael) Encryption Subroutine -/* void aes_enc_blk(struct crypto_tfm *tfm, u8 *out_blk, const u8 *in_blk) */ +/* void aes_enc_blk(struct crypto_aes_ctx *ctx, u8 *out_blk, const u8 *in_blk) */ .global aes_enc_blk @@ -228,7 +228,7 @@ aes_enc_blk: push %ebp - mov tfm(%esp),%ebp + mov ctx(%esp),%ebp // CAUTION: the order and the values used in these assigns // rely on the register mappings @@ -292,7 +292,7 @@ aes_enc_blk: ret // AES (Rijndael) Decryption Subroutine -/* void aes_dec_blk(struct crypto_tfm *tfm, u8 *out_blk, const u8 *in_blk) */ +/* void aes_dec_blk(struct crypto_aes_ctx *ctx, u8 *out_blk, const u8 *in_blk) */ .global aes_dec_blk @@ -303,7 +303,7 @@ aes_enc_blk: aes_dec_blk: push %ebp - mov tfm(%esp),%ebp + mov ctx(%esp),%ebp // CAUTION: the order and the values used in these assigns // rely on the register mappings diff --git a/arch/x86/crypto/aes-x86_64-asm_64.S b/arch/x86/crypto/aes-x86_64-asm_64.S index a120f526c3df..5b577d5a059b 100644 --- a/arch/x86/crypto/aes-x86_64-asm_64.S +++ b/arch/x86/crypto/aes-x86_64-asm_64.S @@ -17,8 +17,6 @@ #include <asm/asm-offsets.h> -#define BASE crypto_tfm_ctx_offset - #define R1 %rax #define R1E %eax #define R1X %ax @@ -56,13 +54,13 @@ .align 8; \ FUNC: movq r1,r2; \ movq r3,r4; \ - leaq BASE+KEY+48+4(r8),r9; \ + leaq KEY+48(r8),r9; \ movq r10,r11; \ movl (r7),r5 ## E; \ movl 4(r7),r1 ## E; \ movl 8(r7),r6 ## E; \ movl 12(r7),r7 ## E; \ - movl BASE+0(r8),r10 ## E; \ + movl 480(r8),r10 ## E; \ xorl -48(r9),r5 ## E; \ xorl -44(r9),r1 ## E; \ xorl -40(r9),r6 ## E; \ diff --git a/arch/x86/crypto/aes_glue.c b/arch/x86/crypto/aes_glue.c index 71f457827116..49ae9fe32b22 100644 --- a/arch/x86/crypto/aes_glue.c +++ b/arch/x86/crypto/aes_glue.c @@ -5,17 +5,29 @@ #include <crypto/aes.h> -asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); -asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); +asmlinkage void aes_enc_blk(struct crypto_aes_ctx *ctx, u8 *out, const u8 *in); +asmlinkage void aes_dec_blk(struct crypto_aes_ctx *ctx, u8 *out, const u8 *in); + +void crypto_aes_encrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src) +{ + aes_enc_blk(ctx, dst, src); +} +EXPORT_SYMBOL_GPL(crypto_aes_encrypt_x86); + +void crypto_aes_decrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src) +{ + aes_dec_blk(ctx, dst, src); +} +EXPORT_SYMBOL_GPL(crypto_aes_decrypt_x86); static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) { - aes_enc_blk(tfm, dst, src); + aes_enc_blk(crypto_tfm_ctx(tfm), dst, src); } static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) { - aes_dec_blk(tfm, dst, src); + aes_dec_blk(crypto_tfm_ctx(tfm), dst, src); } static struct crypto_alg aes_alg = { diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S new file mode 100644 index 000000000000..caba99601703 --- /dev/null +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -0,0 +1,896 @@ +/* + * Implement AES algorithm in Intel AES-NI instructions. + * + * The white paper of AES-NI instructions can be downloaded from: + * http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf + * + * Copyright (C) 2008, Intel Corp. + * Author: Huang Ying <ying.huang@intel.com> + * Vinodh Gopal <vinodh.gopal@intel.com> + * Kahraman Akdemir + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/linkage.h> + +.text + +#define STATE1 %xmm0 +#define STATE2 %xmm4 +#define STATE3 %xmm5 +#define STATE4 %xmm6 +#define STATE STATE1 +#define IN1 %xmm1 +#define IN2 %xmm7 +#define IN3 %xmm8 +#define IN4 %xmm9 +#define IN IN1 +#define KEY %xmm2 +#define IV %xmm3 + +#define KEYP %rdi +#define OUTP %rsi +#define INP %rdx +#define LEN %rcx +#define IVP %r8 +#define KLEN %r9d +#define T1 %r10 +#define TKEYP T1 +#define T2 %r11 + +_key_expansion_128: +_key_expansion_256a: + pshufd $0b11111111, %xmm1, %xmm1 + shufps $0b00010000, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + shufps $0b10001100, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + pxor %xmm1, %xmm0 + movaps %xmm0, (%rcx) + add $0x10, %rcx + ret + +_key_expansion_192a: + pshufd $0b01010101, %xmm1, %xmm1 + shufps $0b00010000, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + shufps $0b10001100, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + pxor %xmm1, %xmm0 + + movaps %xmm2, %xmm5 + movaps %xmm2, %xmm6 + pslldq $4, %xmm5 + pshufd $0b11111111, %xmm0, %xmm3 + pxor %xmm3, %xmm2 + pxor %xmm5, %xmm2 + + movaps %xmm0, %xmm1 + shufps $0b01000100, %xmm0, %xmm6 + movaps %xmm6, (%rcx) + shufps $0b01001110, %xmm2, %xmm1 + movaps %xmm1, 16(%rcx) + add $0x20, %rcx + ret + +_key_expansion_192b: + pshufd $0b01010101, %xmm1, %xmm1 + shufps $0b00010000, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + shufps $0b10001100, %xmm0, %xmm4 + pxor %xmm4, %xmm0 + pxor %xmm1, %xmm0 + + movaps %xmm2, %xmm5 + pslldq $4, %xmm5 + pshufd $0b11111111, %xmm0, %xmm3 + pxor %xmm3, %xmm2 + pxor %xmm5, %xmm2 + + movaps %xmm0, (%rcx) + add $0x10, %rcx + ret + +_key_expansion_256b: + pshufd $0b10101010, %xmm1, %xmm1 + shufps $0b00010000, %xmm2, %xmm4 + pxor %xmm4, %xmm2 + shufps $0b10001100, %xmm2, %xmm4 + pxor %xmm4, %xmm2 + pxor %xmm1, %xmm2 + movaps %xmm2, (%rcx) + add $0x10, %rcx + ret + +/* + * int aesni_set_key(struct crypto_aes_ctx *ctx, const u8 *in_key, + * unsigned int key_len) + */ +ENTRY(aesni_set_key) + movups (%rsi), %xmm0 # user key (first 16 bytes) + movaps %xmm0, (%rdi) + lea 0x10(%rdi), %rcx # key addr + movl %edx, 480(%rdi) + pxor %xmm4, %xmm4 # xmm4 is assumed 0 in _key_expansion_x + cmp $24, %dl + jb .Lenc_key128 + je .Lenc_key192 + movups 0x10(%rsi), %xmm2 # other user key + movaps %xmm2, (%rcx) + add $0x10, %rcx + # aeskeygenassist $0x1, %xmm2, %xmm1 # round 1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01 + call _key_expansion_256a + # aeskeygenassist $0x1, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01 + call _key_expansion_256b + # aeskeygenassist $0x2, %xmm2, %xmm1 # round 2 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02 + call _key_expansion_256a + # aeskeygenassist $0x2, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02 + call _key_expansion_256b + # aeskeygenassist $0x4, %xmm2, %xmm1 # round 3 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04 + call _key_expansion_256a + # aeskeygenassist $0x4, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04 + call _key_expansion_256b + # aeskeygenassist $0x8, %xmm2, %xmm1 # round 4 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08 + call _key_expansion_256a + # aeskeygenassist $0x8, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08 + call _key_expansion_256b + # aeskeygenassist $0x10, %xmm2, %xmm1 # round 5 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10 + call _key_expansion_256a + # aeskeygenassist $0x10, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10 + call _key_expansion_256b + # aeskeygenassist $0x20, %xmm2, %xmm1 # round 6 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20 + call _key_expansion_256a + # aeskeygenassist $0x20, %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20 + call _key_expansion_256b + # aeskeygenassist $0x40, %xmm2, %xmm1 # round 7 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40 + call _key_expansion_256a + jmp .Ldec_key +.Lenc_key192: + movq 0x10(%rsi), %xmm2 # other user key + # aeskeygenassist $0x1, %xmm2, %xmm1 # round 1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01 + call _key_expansion_192a + # aeskeygenassist $0x2, %xmm2, %xmm1 # round 2 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02 + call _key_expansion_192b + # aeskeygenassist $0x4, %xmm2, %xmm1 # round 3 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04 + call _key_expansion_192a + # aeskeygenassist $0x8, %xmm2, %xmm1 # round 4 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08 + call _key_expansion_192b + # aeskeygenassist $0x10, %xmm2, %xmm1 # round 5 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10 + call _key_expansion_192a + # aeskeygenassist $0x20, %xmm2, %xmm1 # round 6 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20 + call _key_expansion_192b + # aeskeygenassist $0x40, %xmm2, %xmm1 # round 7 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40 + call _key_expansion_192a + # aeskeygenassist $0x80, %xmm2, %xmm1 # round 8 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x80 + call _key_expansion_192b + jmp .Ldec_key +.Lenc_key128: + # aeskeygenassist $0x1, %xmm0, %xmm1 # round 1 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01 + call _key_expansion_128 + # aeskeygenassist $0x2, %xmm0, %xmm1 # round 2 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02 + call _key_expansion_128 + # aeskeygenassist $0x4, %xmm0, %xmm1 # round 3 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04 + call _key_expansion_128 + # aeskeygenassist $0x8, %xmm0, %xmm1 # round 4 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08 + call _key_expansion_128 + # aeskeygenassist $0x10, %xmm0, %xmm1 # round 5 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10 + call _key_expansion_128 + # aeskeygenassist $0x20, %xmm0, %xmm1 # round 6 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20 + call _key_expansion_128 + # aeskeygenassist $0x40, %xmm0, %xmm1 # round 7 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x40 + call _key_expansion_128 + # aeskeygenassist $0x80, %xmm0, %xmm1 # round 8 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x80 + call _key_expansion_128 + # aeskeygenassist $0x1b, %xmm0, %xmm1 # round 9 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x1b + call _key_expansion_128 + # aeskeygenassist $0x36, %xmm0, %xmm1 # round 10 + .byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x36 + call _key_expansion_128 +.Ldec_key: + sub $0x10, %rcx + movaps (%rdi), %xmm0 + movaps (%rcx), %xmm1 + movaps %xmm0, 240(%rcx) + movaps %xmm1, 240(%rdi) + add $0x10, %rdi + lea 240-16(%rcx), %rsi +.align 4 +.Ldec_key_loop: + movaps (%rdi), %xmm0 + # aesimc %xmm0, %xmm1 + .byte 0x66, 0x0f, 0x38, 0xdb, 0xc8 + movaps %xmm1, (%rsi) + add $0x10, %rdi + sub $0x10, %rsi + cmp %rcx, %rdi + jb .Ldec_key_loop + xor %rax, %rax + ret + +/* + * void aesni_enc(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src) + */ +ENTRY(aesni_enc) + movl 480(KEYP), KLEN # key length + movups (INP), STATE # input + call _aesni_enc1 + movups STATE, (OUTP) # output + ret + +/* + * _aesni_enc1: internal ABI + * input: + * KEYP: key struct pointer + * KLEN: round count + * STATE: initial state (input) + * output: + * STATE: finial state (output) + * changed: + * KEY + * TKEYP (T1) + */ +_aesni_enc1: + movaps (KEYP), KEY # key + mov KEYP, TKEYP + pxor KEY, STATE # round 0 + add $0x30, TKEYP + cmp $24, KLEN + jb .Lenc128 + lea 0x20(TKEYP), TKEYP + je .Lenc192 + add $0x20, TKEYP + movaps -0x60(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps -0x50(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 +.align 4 +.Lenc192: + movaps -0x40(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps -0x30(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 +.align 4 +.Lenc128: + movaps -0x20(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps -0x10(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps (TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x10(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x20(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x30(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x40(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x50(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x60(TKEYP), KEY + # aesenc KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + movaps 0x70(TKEYP), KEY + # aesenclast KEY, STATE # last round + .byte 0x66, 0x0f, 0x38, 0xdd, 0xc2 + ret + +/* + * _aesni_enc4: internal ABI + * input: + * KEYP: key struct pointer + * KLEN: round count + * STATE1: initial state (input) + * STATE2 + * STATE3 + * STATE4 + * output: + * STATE1: finial state (output) + * STATE2 + * STATE3 + * STATE4 + * changed: + * KEY + * TKEYP (T1) + */ +_aesni_enc4: + movaps (KEYP), KEY # key + mov KEYP, TKEYP + pxor KEY, STATE1 # round 0 + pxor KEY, STATE2 + pxor KEY, STATE3 + pxor KEY, STATE4 + add $0x30, TKEYP + cmp $24, KLEN + jb .L4enc128 + lea 0x20(TKEYP), TKEYP + je .L4enc192 + add $0x20, TKEYP + movaps -0x60(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps -0x50(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 +#.align 4 +.L4enc192: + movaps -0x40(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps -0x30(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 +#.align 4 +.L4enc128: + movaps -0x20(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps -0x10(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps (TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x10(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x20(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x30(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x40(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x50(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x60(TKEYP), KEY + # aesenc KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xc2 + # aesenc KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xe2 + # aesenc KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xea + # aesenc KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdc, 0xf2 + movaps 0x70(TKEYP), KEY + # aesenclast KEY, STATE1 # last round + .byte 0x66, 0x0f, 0x38, 0xdd, 0xc2 + # aesenclast KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdd, 0xe2 + # aesenclast KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdd, 0xea + # aesenclast KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdd, 0xf2 + ret + +/* + * void aesni_dec (struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src) + */ +ENTRY(aesni_dec) + mov 480(KEYP), KLEN # key length + add $240, KEYP + movups (INP), STATE # input + call _aesni_dec1 + movups STATE, (OUTP) #output + ret + +/* + * _aesni_dec1: internal ABI + * input: + * KEYP: key struct pointer + * KLEN: key length + * STATE: initial state (input) + * output: + * STATE: finial state (output) + * changed: + * KEY + * TKEYP (T1) + */ +_aesni_dec1: + movaps (KEYP), KEY # key + mov KEYP, TKEYP + pxor KEY, STATE # round 0 + add $0x30, TKEYP + cmp $24, KLEN + jb .Ldec128 + lea 0x20(TKEYP), TKEYP + je .Ldec192 + add $0x20, TKEYP + movaps -0x60(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps -0x50(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 +.align 4 +.Ldec192: + movaps -0x40(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps -0x30(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 +.align 4 +.Ldec128: + movaps -0x20(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps -0x10(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps (TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x10(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x20(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x30(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x40(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x50(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x60(TKEYP), KEY + # aesdec KEY, STATE + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + movaps 0x70(TKEYP), KEY + # aesdeclast KEY, STATE # last round + .byte 0x66, 0x0f, 0x38, 0xdf, 0xc2 + ret + +/* + * _aesni_dec4: internal ABI + * input: + * KEYP: key struct pointer + * KLEN: key length + * STATE1: initial state (input) + * STATE2 + * STATE3 + * STATE4 + * output: + * STATE1: finial state (output) + * STATE2 + * STATE3 + * STATE4 + * changed: + * KEY + * TKEYP (T1) + */ +_aesni_dec4: + movaps (KEYP), KEY # key + mov KEYP, TKEYP + pxor KEY, STATE1 # round 0 + pxor KEY, STATE2 + pxor KEY, STATE3 + pxor KEY, STATE4 + add $0x30, TKEYP + cmp $24, KLEN + jb .L4dec128 + lea 0x20(TKEYP), TKEYP + je .L4dec192 + add $0x20, TKEYP + movaps -0x60(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps -0x50(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 +.align 4 +.L4dec192: + movaps -0x40(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps -0x30(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 +.align 4 +.L4dec128: + movaps -0x20(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps -0x10(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps (TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x10(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x20(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x30(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x40(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x50(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x60(TKEYP), KEY + # aesdec KEY, STATE1 + .byte 0x66, 0x0f, 0x38, 0xde, 0xc2 + # aesdec KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xde, 0xe2 + # aesdec KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xde, 0xea + # aesdec KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xde, 0xf2 + movaps 0x70(TKEYP), KEY + # aesdeclast KEY, STATE1 # last round + .byte 0x66, 0x0f, 0x38, 0xdf, 0xc2 + # aesdeclast KEY, STATE2 + .byte 0x66, 0x0f, 0x38, 0xdf, 0xe2 + # aesdeclast KEY, STATE3 + .byte 0x66, 0x0f, 0x38, 0xdf, 0xea + # aesdeclast KEY, STATE4 + .byte 0x66, 0x0f, 0x38, 0xdf, 0xf2 + ret + +/* + * void aesni_ecb_enc(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src, + * size_t len) + */ +ENTRY(aesni_ecb_enc) + test LEN, LEN # check length + jz .Lecb_enc_ret + mov 480(KEYP), KLEN + cmp $16, LEN + jb .Lecb_enc_ret + cmp $64, LEN + jb .Lecb_enc_loop1 +.align 4 +.Lecb_enc_loop4: + movups (INP), STATE1 + movups 0x10(INP), STATE2 + movups 0x20(INP), STATE3 + movups 0x30(INP), STATE4 + call _aesni_enc4 + movups STATE1, (OUTP) + movups STATE2, 0x10(OUTP) + movups STATE3, 0x20(OUTP) + movups STATE4, 0x30(OUTP) + sub $64, LEN + add $64, INP + add $64, OUTP + cmp $64, LEN + jge .Lecb_enc_loop4 + cmp $16, LEN + jb .Lecb_enc_ret +.align 4 +.Lecb_enc_loop1: + movups (INP), STATE1 + call _aesni_enc1 + movups STATE1, (OUTP) + sub $16, LEN + add $16, INP + add $16, OUTP + cmp $16, LEN + jge .Lecb_enc_loop1 +.Lecb_enc_ret: + ret + +/* + * void aesni_ecb_dec(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src, + * size_t len); + */ +ENTRY(aesni_ecb_dec) + test LEN, LEN + jz .Lecb_dec_ret + mov 480(KEYP), KLEN + add $240, KEYP + cmp $16, LEN + jb .Lecb_dec_ret + cmp $64, LEN + jb .Lecb_dec_loop1 +.align 4 +.Lecb_dec_loop4: + movups (INP), STATE1 + movups 0x10(INP), STATE2 + movups 0x20(INP), STATE3 + movups 0x30(INP), STATE4 + call _aesni_dec4 + movups STATE1, (OUTP) + movups STATE2, 0x10(OUTP) + movups STATE3, 0x20(OUTP) + movups STATE4, 0x30(OUTP) + sub $64, LEN + add $64, INP + add $64, OUTP + cmp $64, LEN + jge .Lecb_dec_loop4 + cmp $16, LEN + jb .Lecb_dec_ret +.align 4 +.Lecb_dec_loop1: + movups (INP), STATE1 + call _aesni_dec1 + movups STATE1, (OUTP) + sub $16, LEN + add $16, INP + add $16, OUTP + cmp $16, LEN + jge .Lecb_dec_loop1 +.Lecb_dec_ret: + ret + +/* + * void aesni_cbc_enc(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src, + * size_t len, u8 *iv) + */ +ENTRY(aesni_cbc_enc) + cmp $16, LEN + jb .Lcbc_enc_ret + mov 480(KEYP), KLEN + movups (IVP), STATE # load iv as initial state +.align 4 +.Lcbc_enc_loop: + movups (INP), IN # load input + pxor IN, STATE + call _aesni_enc1 + movups STATE, (OUTP) # store output + sub $16, LEN + add $16, INP + add $16, OUTP + cmp $16, LEN + jge .Lcbc_enc_loop + movups STATE, (IVP) +.Lcbc_enc_ret: + ret + +/* + * void aesni_cbc_dec(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src, + * size_t len, u8 *iv) + */ +ENTRY(aesni_cbc_dec) + cmp $16, LEN + jb .Lcbc_dec_ret + mov 480(KEYP), KLEN + add $240, KEYP + movups (IVP), IV + cmp $64, LEN + jb .Lcbc_dec_loop1 +.align 4 +.Lcbc_dec_loop4: + movups (INP), IN1 + movaps IN1, STATE1 + movups 0x10(INP), IN2 + movaps IN2, STATE2 + movups 0x20(INP), IN3 + movaps IN3, STATE3 + movups 0x30(INP), IN4 + movaps IN4, STATE4 + call _aesni_dec4 + pxor IV, STATE1 + pxor IN1, STATE2 + pxor IN2, STATE3 + pxor IN3, STATE4 + movaps IN4, IV + movups STATE1, (OUTP) + movups STATE2, 0x10(OUTP) + movups STATE3, 0x20(OUTP) + movups STATE4, 0x30(OUTP) + sub $64, LEN + add $64, INP + add $64, OUTP + cmp $64, LEN + jge .Lcbc_dec_loop4 + cmp $16, LEN + jb .Lcbc_dec_ret +.align 4 +.Lcbc_dec_loop1: + movups (INP), IN + movaps IN, STATE + call _aesni_dec1 + pxor IV, STATE + movups STATE, (OUTP) + movaps IN, IV + sub $16, LEN + add $16, INP + add $16, OUTP + cmp $16, LEN + jge .Lcbc_dec_loop1 + movups IV, (IVP) +.Lcbc_dec_ret: + ret diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c new file mode 100644 index 000000000000..02af0af65497 --- /dev/null +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -0,0 +1,461 @@ +/* + * Support for Intel AES-NI instructions. This file contains glue + * code, the real AES implementation is in intel-aes_asm.S. + * + * Copyright (C) 2008, Intel Corp. + * Author: Huang Ying <ying.huang@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/hardirq.h> +#include <linux/types.h> +#include <linux/crypto.h> +#include <linux/err.h> +#include <crypto/algapi.h> +#include <crypto/aes.h> +#include <crypto/cryptd.h> +#include <asm/i387.h> +#include <asm/aes.h> + +struct async_aes_ctx { + struct cryptd_ablkcipher *cryptd_tfm; +}; + +#define AESNI_ALIGN 16 +#define AES_BLOCK_MASK (~(AES_BLOCK_SIZE-1)) + +asmlinkage int aesni_set_key(struct crypto_aes_ctx *ctx, const u8 *in_key, + unsigned int key_len); +asmlinkage void aesni_enc(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in); +asmlinkage void aesni_dec(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in); +asmlinkage void aesni_ecb_enc(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in, unsigned int len); +asmlinkage void aesni_ecb_dec(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in, unsigned int len); +asmlinkage void aesni_cbc_enc(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in, unsigned int len, u8 *iv); +asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out, + const u8 *in, unsigned int len, u8 *iv); + +static inline int kernel_fpu_using(void) +{ + if (in_interrupt() && !(read_cr0() & X86_CR0_TS)) + return 1; + return 0; +} + +static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx) +{ + unsigned long addr = (unsigned long)raw_ctx; + unsigned long align = AESNI_ALIGN; + + if (align <= crypto_tfm_ctx_alignment()) + align = 1; + return (struct crypto_aes_ctx *)ALIGN(addr, align); +} + +static int aes_set_key_common(struct crypto_tfm *tfm, void *raw_ctx, + const u8 *in_key, unsigned int key_len) +{ + struct crypto_aes_ctx *ctx = aes_ctx(raw_ctx); + u32 *flags = &tfm->crt_flags; + int err; + + if (key_len != AES_KEYSIZE_128 && key_len != AES_KEYSIZE_192 && + key_len != AES_KEYSIZE_256) { + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + if (kernel_fpu_using()) + err = crypto_aes_expand_key(ctx, in_key, key_len); + else { + kernel_fpu_begin(); + err = aesni_set_key(ctx, in_key, key_len); + kernel_fpu_end(); + } + + return err; +} + +static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + return aes_set_key_common(tfm, crypto_tfm_ctx(tfm), in_key, key_len); +} + +static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm)); + + if (kernel_fpu_using()) + crypto_aes_encrypt_x86(ctx, dst, src); + else { + kernel_fpu_begin(); + aesni_enc(ctx, dst, src); + kernel_fpu_end(); + } +} + +static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm)); + + if (kernel_fpu_using()) + crypto_aes_decrypt_x86(ctx, dst, src); + else { + kernel_fpu_begin(); + aesni_dec(ctx, dst, src); + kernel_fpu_end(); + } +} + +static struct crypto_alg aesni_alg = { + .cra_name = "aes", + .cra_driver_name = "aes-aesni", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1, + .cra_alignmask = 0, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(aesni_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = aes_set_key, + .cia_encrypt = aes_encrypt, + .cia_decrypt = aes_decrypt + } + } +}; + +static int ecb_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm)); + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_fpu_begin(); + while ((nbytes = walk.nbytes)) { + aesni_ecb_enc(ctx, walk.dst.virt.addr, walk.src.virt.addr, + nbytes & AES_BLOCK_MASK); + nbytes &= AES_BLOCK_SIZE - 1; + err = blkcipher_walk_done(desc, &walk, nbytes); + } + kernel_fpu_end(); + + return err; +} + +static int ecb_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm)); + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_fpu_begin(); + while ((nbytes = walk.nbytes)) { + aesni_ecb_dec(ctx, walk.dst.virt.addr, walk.src.virt.addr, + nbytes & AES_BLOCK_MASK); + nbytes &= AES_BLOCK_SIZE - 1; + err = blkcipher_walk_done(desc, &walk, nbytes); + } + kernel_fpu_end(); + + return err; +} + +static struct crypto_alg blk_ecb_alg = { + .cra_name = "__ecb-aes-aesni", + .cra_driver_name = "__driver-ecb-aes-aesni", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1, + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_ecb_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_set_key, + .encrypt = ecb_encrypt, + .decrypt = ecb_decrypt, + }, + }, +}; + +static int cbc_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm)); + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_fpu_begin(); + while ((nbytes = walk.nbytes)) { + aesni_cbc_enc(ctx, walk.dst.virt.addr, walk.src.virt.addr, + nbytes & AES_BLOCK_MASK, walk.iv); + nbytes &= AES_BLOCK_SIZE - 1; + err = blkcipher_walk_done(desc, &walk, nbytes); + } + kernel_fpu_end(); + + return err; +} + +static int cbc_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm)); + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_fpu_begin(); + while ((nbytes = walk.nbytes)) { + aesni_cbc_dec(ctx, walk.dst.virt.addr, walk.src.virt.addr, + nbytes & AES_BLOCK_MASK, walk.iv); + nbytes &= AES_BLOCK_SIZE - 1; + err = blkcipher_walk_done(desc, &walk, nbytes); + } + kernel_fpu_end(); + + return err; +} + +static struct crypto_alg blk_cbc_alg = { + .cra_name = "__cbc-aes-aesni", + .cra_driver_name = "__driver-cbc-aes-aesni", + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1, + .cra_alignmask = 0, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(blk_cbc_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_set_key, + .encrypt = cbc_encrypt, + .decrypt = cbc_decrypt, + }, + }, +}; + +static int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int key_len) +{ + struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + return crypto_ablkcipher_setkey(&ctx->cryptd_tfm->base, key, key_len); +} + +static int ablk_encrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (kernel_fpu_using()) { + struct ablkcipher_request *cryptd_req = + ablkcipher_request_ctx(req); + memcpy(cryptd_req, req, sizeof(*req)); + ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); + return crypto_ablkcipher_encrypt(cryptd_req); + } else { + struct blkcipher_desc desc; + desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); + desc.info = req->info; + desc.flags = 0; + return crypto_blkcipher_crt(desc.tfm)->encrypt( + &desc, req->dst, req->src, req->nbytes); + } +} + +static int ablk_decrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); + struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (kernel_fpu_using()) { + struct ablkcipher_request *cryptd_req = + ablkcipher_request_ctx(req); + memcpy(cryptd_req, req, sizeof(*req)); + ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); + return crypto_ablkcipher_decrypt(cryptd_req); + } else { + struct blkcipher_desc desc; + desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); + desc.info = req->info; + desc.flags = 0; + return crypto_blkcipher_crt(desc.tfm)->decrypt( + &desc, req->dst, req->src, req->nbytes); + } +} + +static void ablk_exit(struct crypto_tfm *tfm) +{ + struct async_aes_ctx *ctx = crypto_tfm_ctx(tfm); + + cryptd_free_ablkcipher(ctx->cryptd_tfm); +} + +static void ablk_init_common(struct crypto_tfm *tfm, + struct cryptd_ablkcipher *cryptd_tfm) +{ + struct async_aes_ctx *ctx = crypto_tfm_ctx(tfm); + + ctx->cryptd_tfm = cryptd_tfm; + tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) + + crypto_ablkcipher_reqsize(&cryptd_tfm->base); +} + +static int ablk_ecb_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-ecb-aes-aesni", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_ecb_alg = { + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-aesni", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_aes_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_ecb_alg.cra_list), + .cra_init = ablk_ecb_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + }, + }, +}; + +static int ablk_cbc_init(struct crypto_tfm *tfm) +{ + struct cryptd_ablkcipher *cryptd_tfm; + + cryptd_tfm = cryptd_alloc_ablkcipher("__driver-cbc-aes-aesni", 0, 0); + if (IS_ERR(cryptd_tfm)) + return PTR_ERR(cryptd_tfm); + ablk_init_common(tfm, cryptd_tfm); + return 0; +} + +static struct crypto_alg ablk_cbc_alg = { + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-aesni", + .cra_priority = 400, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_aes_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ablk_cbc_alg.cra_list), + .cra_init = ablk_cbc_init, + .cra_exit = ablk_exit, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + }, + }, +}; + +static int __init aesni_init(void) +{ + int err; + + if (!cpu_has_aes) { + printk(KERN_ERR "Intel AES-NI instructions are not detected.\n"); + return -ENODEV; + } + if ((err = crypto_register_alg(&aesni_alg))) + goto aes_err; + if ((err = crypto_register_alg(&blk_ecb_alg))) + goto blk_ecb_err; + if ((err = crypto_register_alg(&blk_cbc_alg))) + goto blk_cbc_err; + if ((err = crypto_register_alg(&ablk_ecb_alg))) + goto ablk_ecb_err; + if ((err = crypto_register_alg(&ablk_cbc_alg))) + goto ablk_cbc_err; + + return err; + +ablk_cbc_err: + crypto_unregister_alg(&ablk_ecb_alg); +ablk_ecb_err: + crypto_unregister_alg(&blk_cbc_alg); +blk_cbc_err: + crypto_unregister_alg(&blk_ecb_alg); +blk_ecb_err: + crypto_unregister_alg(&aesni_alg); +aes_err: + return err; +} + +static void __exit aesni_exit(void) +{ + crypto_unregister_alg(&ablk_cbc_alg); + crypto_unregister_alg(&ablk_ecb_alg); + crypto_unregister_alg(&blk_cbc_alg); + crypto_unregister_alg(&blk_ecb_alg); + crypto_unregister_alg(&aesni_alg); +} + +module_init(aesni_init); +module_exit(aesni_exit); + +MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, Intel AES-NI instructions optimized"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("aes"); diff --git a/arch/x86/include/asm/aes.h b/arch/x86/include/asm/aes.h new file mode 100644 index 000000000000..80545a1cbe39 --- /dev/null +++ b/arch/x86/include/asm/aes.h @@ -0,0 +1,11 @@ +#ifndef ASM_X86_AES_H +#define ASM_X86_AES_H + +#include <linux/crypto.h> +#include <crypto/aes.h> + +void crypto_aes_encrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, + const u8 *src); +void crypto_aes_decrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, + const u8 *src); +#endif diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 7301e60dc4a8..0beba0d1468d 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -213,6 +213,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_xmm boot_cpu_has(X86_FEATURE_XMM) #define cpu_has_xmm2 boot_cpu_has(X86_FEATURE_XMM2) #define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3) +#define cpu_has_aes boot_cpu_has(X86_FEATURE_AES) #define cpu_has_ht boot_cpu_has(X86_FEATURE_HT) #define cpu_has_mp boot_cpu_has(X86_FEATURE_MP) #define cpu_has_nx boot_cpu_has(X86_FEATURE_NX) diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h index 2bb6a835c453..4f5c24724856 100644 --- a/arch/x86/include/asm/timer.h +++ b/arch/x86/include/asm/timer.h @@ -11,8 +11,8 @@ unsigned long native_calibrate_tsc(void); #ifdef CONFIG_X86_32 extern int timer_ack; +#endif extern int recalibrate_cpu_khz(void); -#endif /* CONFIG_X86_32 */ extern int no_timer_check; diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig index 65792c2cc462..52c839875478 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -87,30 +87,15 @@ config X86_POWERNOW_K7_ACPI config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE + depends on ACPI && ACPI_PROCESSOR help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors. To compile this driver as a module, choose M here: the module will be called powernow-k8. For details, take a look at <file:Documentation/cpu-freq/>. - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool - prompt "ACPI Support" if X86_32 - depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) - default y - help - This provides access to the K8s Processor Performance States via ACPI. - This driver is probably required for CPUFreq to work with multi-socket and - SMP systems. It is not required on at least some single-socket yet - multi-core systems, even if SMP is enabled. - - It is safe to say Y here. - config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" depends on X86_32 && PCI diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile index 560f7760dae5..509296df294d 100644 --- a/arch/x86/kernel/cpu/cpufreq/Makefile +++ b/arch/x86/kernel/cpu/cpufreq/Makefile @@ -1,6 +1,11 @@ +# Link order matters. K8 is preferred to ACPI because of firmware bugs in early +# K8 systems. ACPI is preferred to all other hardware-specific drivers. +# speedstep-* is preferred over p4-clockmod. + +obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o +obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o @@ -10,7 +15,6 @@ obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o -obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 4b1c319d30c3..3babe1f1e912 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -1,5 +1,5 @@ /* - * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $) + * acpi-cpufreq.c - ACPI Processor P-States Driver * * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> @@ -36,16 +36,18 @@ #include <linux/ftrace.h> #include <linux/acpi.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/uaccess.h> + #include <acpi/processor.h> -#include <asm/io.h> #include <asm/msr.h> #include <asm/processor.h> #include <asm/cpufeature.h> -#include <asm/delay.h> -#include <asm/uaccess.h> -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "acpi-cpufreq", msg) MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); MODULE_DESCRIPTION("ACPI Processor P-States Driver"); @@ -95,7 +97,7 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) perf = data->acpi_data; - for (i=0; i<perf->state_count; i++) { + for (i = 0; i < perf->state_count; i++) { if (value == perf->states[i].status) return data->freq_table[i].frequency; } @@ -110,7 +112,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) msr &= INTEL_MSR_RANGE; perf = data->acpi_data; - for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { + for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { if (msr == perf->states[data->freq_table[i].index].status) return data->freq_table[i].frequency; } @@ -138,15 +140,13 @@ struct io_addr { u8 bit_width; }; -typedef union { - struct msr_addr msr; - struct io_addr io; -} drv_addr_union; - struct drv_cmd { unsigned int type; const struct cpumask *mask; - drv_addr_union addr; + union { + struct msr_addr msr; + struct io_addr io; + } addr; u32 val; }; @@ -369,7 +369,7 @@ static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, unsigned int cur_freq; unsigned int i; - for (i=0; i<100; i++) { + for (i = 0; i < 100; i++) { cur_freq = extract_freq(get_cur_val(mask), data); if (cur_freq == freq) return 1; @@ -494,7 +494,7 @@ acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) unsigned long freq; unsigned long freqn = perf->states[0].core_frequency * 1000; - for (i=0; i<(perf->state_count-1); i++) { + for (i = 0; i < (perf->state_count-1); i++) { freq = freqn; freqn = perf->states[i+1].core_frequency * 1000; if ((2 * cpu_khz) > (freqn + freq)) { @@ -673,7 +673,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) /* detect transition latency */ policy->cpuinfo.transition_latency = 0; - for (i=0; i<perf->state_count; i++) { + for (i = 0; i < perf->state_count; i++) { if ((perf->states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency) policy->cpuinfo.transition_latency = @@ -682,8 +682,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) data->max_freq = perf->states[0].core_frequency * 1000; /* table init */ - for (i=0; i<perf->state_count; i++) { - if (i>0 && perf->states[i].core_frequency >= + for (i = 0; i < perf->state_count; i++) { + if (i > 0 && perf->states[i].core_frequency >= data->freq_table[valid_states-1].frequency / 1000) continue; diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index 965ea52767ac..733093d60436 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -32,7 +32,7 @@ * nforce2_chipset: * FSB is changed using the chipset */ -static struct pci_dev *nforce2_chipset_dev; +static struct pci_dev *nforce2_dev; /* fid: * multiplier * 10 @@ -56,7 +56,9 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, "Minimum FSB to use, if not defined: current FSB - 50"); -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) +#define PFX "cpufreq-nforce2: " +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "cpufreq-nforce2", msg) /** * nforce2_calc_fsb - calculate FSB @@ -118,11 +120,11 @@ static void nforce2_write_pll(int pll) int temp; /* Set the pll addr. to 0x00 */ - pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, 0); + pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0); /* Now write the value in all 64 registers */ for (temp = 0; temp <= 0x3f; temp++) - pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll); + pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); return; } @@ -139,8 +141,8 @@ static unsigned int nforce2_fsb_read(int bootfsb) u32 fsb, temp = 0; /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ - nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL); + nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (!nforce2_sub5) return 0; @@ -148,13 +150,13 @@ static unsigned int nforce2_fsb_read(int bootfsb) fsb /= 1000000; /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (bootfsb || !temp) return fsb; /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; @@ -174,18 +176,18 @@ static int nforce2_set_fsb(unsigned int fsb) int pll = 0; if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); + printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); return -EINVAL; } tfsb = nforce2_fsb_read(0); if (!tfsb) { - printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); + printk(KERN_ERR PFX "Error while reading the FSB\n"); return -EINVAL; } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -197,7 +199,7 @@ static int nforce2_set_fsb(unsigned int fsb) /* Enable write access */ temp = 0x01; - pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp); + pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp); diff = tfsb - fsb; @@ -222,7 +224,7 @@ static int nforce2_set_fsb(unsigned int fsb) } temp = 0x40; - pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp); + pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp); return 0; } @@ -244,7 +246,8 @@ static unsigned int nforce2_get(unsigned int cpu) * nforce2_target - set a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * Sets a new CPUFreq policy. */ @@ -276,7 +279,7 @@ static int nforce2_target(struct cpufreq_policy *policy, /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", + printk(KERN_ERR PFX "Changing FSB to %d failed\n", target_fsb); else dprintk("Changed FSB successfully to %d\n", @@ -327,8 +330,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* FIX: Get FID from CPU */ if (!fid) { if (!cpu_khz) { - printk(KERN_WARNING - "cpufreq: cpu_khz not set, can't calculate multiplier!\n"); + printk(KERN_WARNING PFX + "cpu_khz not set, can't calculate multiplier!\n"); return -ENODEV; } @@ -343,7 +346,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) } } - printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, + printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, fid / 10, fid % 10); /* Set maximum FSB to FSB at boot time */ @@ -392,17 +395,18 @@ static struct cpufreq_driver nforce2_driver = { */ static unsigned int nforce2_detect_chipset(void) { - nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, PCI_ANY_ID, PCI_ANY_ID, NULL); - if (nforce2_chipset_dev == NULL) + if (nforce2_dev == NULL) return -ENODEV; - printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n", - nforce2_chipset_dev->revision); - printk(KERN_INFO - "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n"); + printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", + nforce2_dev->revision); + printk(KERN_INFO PFX + "FSB changing is maybe unstable and can lead to " + "crashes and data loss.\n"); return 0; } @@ -420,7 +424,7 @@ static int __init nforce2_init(void) /* detect chipset */ if (nforce2_detect_chipset()) { - printk(KERN_ERR "cpufreq: No nForce2 chipset.\n"); + printk(KERN_INFO PFX "No nForce2 chipset.\n"); return -ENODEV; } diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c index c2f930d86640..3f83ea12c47a 100644 --- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c +++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c @@ -12,12 +12,12 @@ #include <linux/cpufreq.h> #include <linux/ioport.h> #include <linux/slab.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <linux/delay.h> #include <asm/msr.h> #include <asm/tsc.h> -#include <asm/timex.h> -#include <asm/io.h> -#include <asm/delay.h> #define EPS_BRAND_C7M 0 #define EPS_BRAND_C7 1 @@ -184,7 +184,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) break; } - switch(brand) { + switch (brand) { case EPS_BRAND_C7M: printk(KERN_CONT "C7-M\n"); break; @@ -218,17 +218,20 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Print voltage and multiplier */ rdmsr(MSR_IA32_PERF_STATUS, lo, hi); current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", current_voltage * 16 + 700); + printk(KERN_INFO "eps: Current voltage = %dmV\n", + current_voltage * 16 + 700); current_multiplier = (lo >> 8) & 0xff; printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); /* Print limits */ max_voltage = hi & 0xff; - printk(KERN_INFO "eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); + printk(KERN_INFO "eps: Highest voltage = %dmV\n", + max_voltage * 16 + 700); max_multiplier = (hi >> 8) & 0xff; printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); min_voltage = (hi >> 16) & 0xff; - printk(KERN_INFO "eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); + printk(KERN_INFO "eps: Lowest voltage = %dmV\n", + min_voltage * 16 + 700); min_multiplier = (hi >> 24) & 0xff; printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); @@ -318,7 +321,7 @@ static int eps_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* eps_attr[] = { +static struct freq_attr *eps_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -356,7 +359,7 @@ static void __exit eps_exit(void) cpufreq_unregister_driver(&eps_driver); } -MODULE_AUTHOR("Rafa³ Bilski <rafalbilski@interia.pl>"); +MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>"); MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c index fe613c93b366..006b278b0d5d 100644 --- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c +++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c @@ -184,7 +184,8 @@ static int elanfreq_target(struct cpufreq_policy *policy, { unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], + target_freq, relation, &newstate)) return -EINVAL; elanfreq_set_cpu_state(newstate); @@ -301,7 +302,8 @@ static void __exit elanfreq_exit(void) module_param(max_freq, int, 0444); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>"); +MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, " + "Sven Geggus <sven@geggus.net>"); MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); module_init(elanfreq_init); diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c index 9d9eae82e60f..ac27ec2264d5 100644 --- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c @@ -79,8 +79,9 @@ #include <linux/smp.h> #include <linux/cpufreq.h> #include <linux/pci.h> +#include <linux/errno.h> + #include <asm/processor-cyrix.h> -#include <asm/errno.h> /* PCI config registers, all at F0 */ #define PCI_PMER1 0x80 /* power management enable register 1 */ @@ -122,8 +123,8 @@ static struct gxfreq_params *gx_params; static int stock_freq; /* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ -static int pci_busclk = 0; -module_param (pci_busclk, int, 0444); +static int pci_busclk; +module_param(pci_busclk, int, 0444); /* maximum duration for which the cpu may be suspended * (32us * MAX_DURATION). If no parameter is given, this defaults @@ -132,7 +133,7 @@ module_param (pci_busclk, int, 0444); * is suspended -- processing power is just 0.39% of what it used to be, * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ static int max_duration = 255; -module_param (max_duration, int, 0444); +module_param(max_duration, int, 0444); /* For the default policy, we want at least some processing power * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) @@ -140,7 +141,8 @@ module_param (max_duration, int, 0444); #define POLICY_MIN_DIV 20 -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "gx-suspmod", msg) /** * we can detect a core multipiler from dir0_lsb @@ -166,12 +168,20 @@ static int gx_freq_mult[16] = { * Low Level chipset interface * ****************************************************************/ static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, + PCI_ANY_ID, PCI_ANY_ID }, { 0, }, }; +static void gx_write_byte(int reg, int value) +{ + pci_write_config_byte(gx_params->cs55x0, reg, value); +} + /** * gx_detect_chipset: * @@ -200,7 +210,8 @@ static __init struct pci_dev *gx_detect_chipset(void) /** * gx_get_cpuspeed: * - * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. + * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi + * Geode CPU runs. */ static unsigned int gx_get_cpuspeed(unsigned int cpu) { @@ -217,17 +228,18 @@ static unsigned int gx_get_cpuspeed(unsigned int cpu) * **/ -static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) +static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, + u8 *off_duration) { unsigned int i; u8 tmp_on, tmp_off; int old_tmp_freq = stock_freq; int tmp_freq; - *off_duration=1; - *on_duration=0; + *off_duration = 1; + *on_duration = 0; - for (i=max_duration; i>0; i--) { + for (i = max_duration; i > 0; i--) { tmp_off = ((khz * i) / stock_freq) & 0xff; tmp_on = i - tmp_off; tmp_freq = (stock_freq * tmp_off) / i; @@ -259,26 +271,34 @@ static void gx_set_cpuspeed(unsigned int khz) freqs.cpu = 0; freqs.old = gx_get_cpuspeed(0); - new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration); + new_khz = gx_validate_speed(khz, &gx_params->on_duration, + &gx_params->off_duration); freqs.new = new_khz; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); local_irq_save(flags); - if (new_khz != stock_freq) { /* if new khz == 100% of CPU speed, it is special case */ + + + if (new_khz != stock_freq) { + /* if new khz == 100% of CPU speed, it is special case */ switch (gx_params->cs55x0->device) { case PCI_DEVICE_ID_CYRIX_5530_LEGACY: pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; /* FIXME: need to test other values -- Zwane,Miura */ - pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */ - pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */ - pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1); - - if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */ - suscfg = gx_params->pci_suscfg | SUSMOD; - } else { /* CS5530A,B.. */ - suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE; + /* typical 2 to 4ms */ + gx_write_byte(PCI_IRQTC, 4); + /* typical 50 to 100ms */ + gx_write_byte(PCI_VIDTC, 100); + gx_write_byte(PCI_PMER1, pmer1); + + if (gx_params->cs55x0->revision < 0x10) { + /* CS5530(rev 1.2, 1.3) */ + suscfg = gx_params->pci_suscfg|SUSMOD; + } else { + /* CS5530A,B.. */ + suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE; } break; case PCI_DEVICE_ID_CYRIX_5520: @@ -294,13 +314,13 @@ static void gx_set_cpuspeed(unsigned int khz) suscfg = gx_params->pci_suscfg & ~(SUSMOD); gx_params->off_duration = 0; gx_params->on_duration = 0; - dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n"); + dprintk("suspend modulation disabled: cpu runs 100%% speed.\n"); } - pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); + gx_write_byte(PCI_MODOFF, gx_params->off_duration); + gx_write_byte(PCI_MODON, gx_params->on_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); + gx_write_byte(PCI_SUSCFG, suscfg); pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); local_irq_restore(flags); @@ -334,7 +354,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) return -EINVAL; policy->cpu = 0; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); /* it needs to be assured that at least one supported frequency is * within policy->min and policy->max. If it is not, policy->max @@ -354,7 +375,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) policy->max = tmp_freq; if (policy->max < policy->min) policy->max = policy->min; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); return 0; } @@ -398,18 +420,18 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) return -ENODEV; /* determine maximum frequency */ - if (pci_busclk) { + if (pci_busclk) maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - } else if (cpu_khz) { + else if (cpu_khz) maxfreq = cpu_khz; - } else { + else maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - } + stock_freq = maxfreq; curfreq = gx_get_cpuspeed(0); dprintk("cpu max frequency is %d.\n", maxfreq); - dprintk("cpu current frequency is %dkHz.\n",curfreq); + dprintk("cpu current frequency is %dkHz.\n", curfreq); /* setup basic struct for cpufreq API */ policy->cpu = 0; @@ -447,7 +469,8 @@ static int __init cpufreq_gx_init(void) struct pci_dev *gx_pci; /* Test if we have the right hardware */ - if ((gx_pci = gx_detect_chipset()) == NULL) + gx_pci = gx_detect_chipset(); + if (gx_pci == NULL) return -ENODEV; /* check whether module parameters are sane */ @@ -468,9 +491,11 @@ static int __init cpufreq_gx_init(void) pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); - pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration)); + pci_read_config_byte(params->cs55x0, PCI_MODOFF, + &(params->off_duration)); - if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { + ret = cpufreq_register_driver(&gx_suspmod_driver); + if (ret) { kfree(params); return ret; /* register error! */ } @@ -485,9 +510,9 @@ static void __exit cpufreq_gx_exit(void) kfree(gx_params); } -MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>"); -MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>"); +MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); +MODULE_LICENSE("GPL"); module_init(cpufreq_gx_init); module_exit(cpufreq_gx_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index a4cff5d6e380..f1c51aea064d 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -30,12 +30,12 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/delay.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <linux/acpi.h> +#include <linux/kernel.h> #include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> -#include <asm/acpi.h> -#include <linux/acpi.h> #include <acpi/processor.h> #include "longhaul.h" @@ -58,7 +58,7 @@ #define USE_NORTHBRIDGE (1 << 2) static int cpu_model; -static unsigned int numscales=16; +static unsigned int numscales = 16; static unsigned int fsb; static const struct mV_pos *vrm_mV_table; @@ -67,8 +67,8 @@ static const unsigned char *mV_vrm_table; static unsigned int highest_speed, lowest_speed; /* kHz */ static unsigned int minmult, maxmult; static int can_scale_voltage; -static struct acpi_processor *pr = NULL; -static struct acpi_processor_cx *cx = NULL; +static struct acpi_processor *pr; +static struct acpi_processor_cx *cx; static u32 acpi_regs_addr; static u8 longhaul_flags; static unsigned int longhaul_index; @@ -78,12 +78,13 @@ static int scale_voltage; static int disable_acpi_c3; static int revid_errata; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "longhaul", msg) /* Clock ratios multiplied by 10 */ -static int clock_ratio[32]; -static int eblcr_table[32]; +static int mults[32]; +static int eblcr[32]; static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; @@ -93,7 +94,7 @@ static char speedbuffer[8]; static char *print_speed(int speed) { if (speed < 1000) { - snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed); + snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed); return speedbuffer; } @@ -122,27 +123,28 @@ static unsigned int calc_speed(int mult) static int longhaul_get_cpu_mult(void) { - unsigned long invalue=0,lo, hi; + unsigned long invalue = 0, lo, hi; - rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi); - invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22; - if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) { + rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi); + invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22; + if (longhaul_version == TYPE_LONGHAUL_V2 || + longhaul_version == TYPE_POWERSAVER) { if (lo & (1<<27)) - invalue+=16; + invalue += 16; } - return eblcr_table[invalue]; + return eblcr[invalue]; } /* For processor with BCR2 MSR */ -static void do_longhaul1(unsigned int clock_ratio_index) +static void do_longhaul1(unsigned int mults_index) { union msr_bcr2 bcr2; rdmsrl(MSR_VIA_BCR2, bcr2.val); /* Enable software clock multiplier */ bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff; + bcr2.bits.CLOCKMUL = mults_index & 0xff; /* Sync to timer tick */ safe_halt(); @@ -161,7 +163,7 @@ static void do_longhaul1(unsigned int clock_ratio_index) /* For processor with Longhaul MSR */ -static void do_powersaver(int cx_address, unsigned int clock_ratio_index, +static void do_powersaver(int cx_address, unsigned int mults_index, unsigned int dir) { union msr_longhaul longhaul; @@ -173,11 +175,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index, longhaul.bits.RevisionKey = longhaul.bits.RevisionID; else longhaul.bits.RevisionKey = 0; - longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; - longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; + longhaul.bits.SoftBusRatio = mults_index & 0xf; + longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4; /* Setup new voltage */ if (can_scale_voltage) - longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f; + longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f; /* Sync to timer tick */ safe_halt(); /* Raise voltage if necessary */ @@ -240,14 +242,14 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index, /** * longhaul_set_cpu_frequency() - * @clock_ratio_index : bitpattern of the new multiplier. + * @mults_index : bitpattern of the new multiplier. * * Sets a new clock ratio. */ static void longhaul_setstate(unsigned int table_index) { - unsigned int clock_ratio_index; + unsigned int mults_index; int speed, mult; struct cpufreq_freqs freqs; unsigned long flags; @@ -256,9 +258,9 @@ static void longhaul_setstate(unsigned int table_index) u32 bm_timeout = 1000; unsigned int dir = 0; - clock_ratio_index = longhaul_table[table_index].index; + mults_index = longhaul_table[table_index].index; /* Safety precautions */ - mult = clock_ratio[clock_ratio_index & 0x1f]; + mult = mults[mults_index & 0x1f]; if (mult == -1) return; speed = calc_speed(mult); @@ -274,7 +276,7 @@ static void longhaul_setstate(unsigned int table_index) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", + dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", fsb, mult/10, mult%10, print_speed(speed/1000)); retry_loop: preempt_disable(); @@ -282,8 +284,8 @@ retry_loop: pic2_mask = inb(0xA1); pic1_mask = inb(0x21); /* works on C3. save mask. */ - outb(0xFF,0xA1); /* Overkill */ - outb(0xFE,0x21); /* TMR0 only */ + outb(0xFF, 0xA1); /* Overkill */ + outb(0xFE, 0x21); /* TMR0 only */ /* Wait while PCI bus is busy. */ if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE @@ -312,7 +314,7 @@ retry_loop: * Software controlled multipliers only. */ case TYPE_LONGHAUL_V1: - do_longhaul1(clock_ratio_index); + do_longhaul1(mults_index); break; /* @@ -327,9 +329,9 @@ retry_loop: if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, clock_ratio_index, dir); + do_powersaver(cx->address, mults_index, dir); } else { - do_powersaver(0, clock_ratio_index, dir); + do_powersaver(0, mults_index, dir); } break; } @@ -341,8 +343,8 @@ retry_loop: /* Enable bus master arbitration */ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); } - outb(pic2_mask,0xA1); /* restore mask */ - outb(pic1_mask,0x21); + outb(pic2_mask, 0xA1); /* restore mask */ + outb(pic1_mask, 0x21); local_irq_restore(flags); preempt_enable(); @@ -392,7 +394,8 @@ retry_loop: cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); if (!bm_timeout) - printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n"); + printk(KERN_INFO PFX "Warning: Timeout while waiting for " + "idle PCI bus.\n"); } /* @@ -458,31 +461,32 @@ static int __init longhaul_get_ranges(void) break; } - dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", + dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n", minmult/10, minmult%10, maxmult/10, maxmult%10); highest_speed = calc_speed(maxmult); lowest_speed = calc_speed(minmult); - dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, + dprintk("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, print_speed(lowest_speed/1000), print_speed(highest_speed/1000)); if (lowest_speed == highest_speed) { - printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n"); + printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); return -EINVAL; } if (lowest_speed > highest_speed) { - printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", + printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", lowest_speed, highest_speed); return -EINVAL; } - longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL); - if(!longhaul_table) + longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table), + GFP_KERNEL); + if (!longhaul_table) return -ENOMEM; for (j = 0; j < numscales; j++) { - ratio = clock_ratio[j]; + ratio = mults[j]; if (ratio == -1) continue; if (ratio > maxmult || ratio < minmult) @@ -507,13 +511,10 @@ static int __init longhaul_get_ranges(void) } } if (min_i != j) { - unsigned int temp; - temp = longhaul_table[j].frequency; - longhaul_table[j].frequency = longhaul_table[min_i].frequency; - longhaul_table[min_i].frequency = temp; - temp = longhaul_table[j].index; - longhaul_table[j].index = longhaul_table[min_i].index; - longhaul_table[min_i].index = temp; + swap(longhaul_table[j].frequency, + longhaul_table[min_i].frequency); + swap(longhaul_table[j].index, + longhaul_table[min_i].index); } } @@ -521,7 +522,7 @@ static int __init longhaul_get_ranges(void) /* Find index we are running on */ for (j = 0; j < k; j++) { - if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) { + if (mults[longhaul_table[j].index & 0x1f] == mult) { longhaul_index = j; break; } @@ -559,20 +560,22 @@ static void __init longhaul_setup_voltagescaling(void) maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " + printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000); + minvid.mV/1000, minvid.mV%1000, + maxvid.mV/1000, maxvid.mV%1000); return; } if (minvid.mV == maxvid.mV) { - printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are " - "both %d.%03d. Voltage scaling disabled\n", + printk(KERN_INFO PFX "Claims to support voltage scaling but " + "min & max are both %d.%03d. " + "Voltage scaling disabled\n", maxvid.mV/1000, maxvid.mV%1000); return; } - /* How many voltage steps */ + /* How many voltage steps*/ numvscales = maxvid.pos - minvid.pos + 1; printk(KERN_INFO PFX "Max VID=%d.%03d " @@ -586,7 +589,7 @@ static void __init longhaul_setup_voltagescaling(void) j = longhaul.bits.MinMHzBR; if (longhaul.bits.MinMHzBR4) j += 16; - min_vid_speed = eblcr_table[j]; + min_vid_speed = eblcr[j]; if (min_vid_speed == -1) return; switch (longhaul.bits.MinMHzFSB) { @@ -617,7 +620,8 @@ static void __init longhaul_setup_voltagescaling(void) pos = minvid.pos; longhaul_table[j].index |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); + printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", + speed, j, vid.mV); j++; } @@ -640,7 +644,8 @@ static int longhaul_target(struct cpufreq_policy *policy, unsigned int dir = 0; u8 vid, current_vid; - if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index)) + if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, + relation, &table_index)) return -EINVAL; /* Don't set same frequency again */ @@ -656,7 +661,8 @@ static int longhaul_target(struct cpufreq_policy *policy, * this in hardware, C3 is old and we need to do this * in software. */ i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f; + current_vid = (longhaul_table[longhaul_index].index >> 8); + current_vid &= 0x1f; if (table_index > longhaul_index) dir = 1; while (i != table_index) { @@ -691,9 +697,9 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, { struct acpi_device *d; - if ( acpi_bus_get_device(obj_handle, &d) ) { + if (acpi_bus_get_device(obj_handle, &d)) return 0; - } + *return_value = acpi_driver_data(d); return 1; } @@ -750,7 +756,7 @@ static int longhaul_setup_southbridge(void) /* Find VT8235 southbridge */ dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); if (dev == NULL) - /* Find VT8237 southbridge */ + /* Find VT8237 southbridge */ dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, NULL); if (dev != NULL) { @@ -769,7 +775,8 @@ static int longhaul_setup_southbridge(void) if (pci_cmd & 1 << 7) { pci_read_config_dword(dev, 0x88, &acpi_regs_addr); acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr); + printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", + acpi_regs_addr); } pci_dev_put(dev); @@ -781,7 +788,7 @@ static int longhaul_setup_southbridge(void) static int __init longhaul_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *c = &cpu_data(0); - char *cpuname=NULL; + char *cpuname = NULL; int ret; u32 lo, hi; @@ -791,8 +798,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_SAMUEL; cpuname = "C3 'Samuel' [C5A]"; longhaul_version = TYPE_LONGHAUL_V1; - memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio)); - memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr)); + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr)); break; case 7: @@ -803,10 +810,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpuname = "C3 'Samuel 2' [C5B]"; /* Note, this is not a typo, early Samuel2's had * Samuel1 ratios. */ - memcpy(clock_ratio, samuel1_clock_ratio, - sizeof(samuel1_clock_ratio)); - memcpy(eblcr_table, samuel2_eblcr, - sizeof(samuel2_eblcr)); + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); break; case 1 ... 15: longhaul_version = TYPE_LONGHAUL_V1; @@ -817,10 +822,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA; cpuname = "C3 'Ezra' [C5C]"; } - memcpy(clock_ratio, ezra_clock_ratio, - sizeof(ezra_clock_ratio)); - memcpy(eblcr_table, ezra_eblcr, - sizeof(ezra_eblcr)); + memcpy(mults, ezra_mults, sizeof(ezra_mults)); + memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr)); break; } break; @@ -829,18 +832,16 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA_T; cpuname = "C3 'Ezra-T' [C5M]"; longhaul_version = TYPE_POWERSAVER; - numscales=32; - memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio)); - memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr)); + numscales = 32; + memcpy(mults, ezrat_mults, sizeof(ezrat_mults)); + memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr)); break; case 9: longhaul_version = TYPE_POWERSAVER; numscales = 32; - memcpy(clock_ratio, - nehemiah_clock_ratio, - sizeof(nehemiah_clock_ratio)); - memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr)); + memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); + memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); switch (c->x86_mask) { case 0 ... 1: cpu_model = CPU_NEHEMIAH; @@ -869,14 +870,14 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_version = TYPE_LONGHAUL_V1; } - printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname); + printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - printk ("Longhaul v%d supported.\n", longhaul_version); + printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); break; case TYPE_POWERSAVER: - printk ("Powersaver supported.\n"); + printk(KERN_CONT "Powersaver supported.\n"); break; }; @@ -940,7 +941,7 @@ static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* longhaul_attr[] = { +static struct freq_attr *longhaul_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -966,13 +967,15 @@ static int __init longhaul_init(void) #ifdef CONFIG_SMP if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n"); + printk(KERN_ERR PFX "More than 1 CPU detected, " + "longhaul disabled.\n"); return -ENODEV; } #endif #ifdef CONFIG_X86_IO_APIC if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n"); + printk(KERN_ERR PFX "APIC detected. Longhaul is currently " + "broken in this configuration.\n"); return -ENODEV; } #endif @@ -993,8 +996,8 @@ static void __exit longhaul_exit(void) { int i; - for (i=0; i < numscales; i++) { - if (clock_ratio[i] == maxmult) { + for (i = 0; i < numscales; i++) { + if (mults[i] == maxmult) { longhaul_setstate(i); break; } @@ -1007,11 +1010,11 @@ static void __exit longhaul_exit(void) /* Even if BIOS is exporting ACPI C3 state, and it is used * with success when CPU is idle, this state doesn't * trigger frequency transition in some cases. */ -module_param (disable_acpi_c3, int, 0644); +module_param(disable_acpi_c3, int, 0644); MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); /* Change CPU voltage with frequency. Very usefull to save * power, but most VIA C3 processors aren't supporting it. */ -module_param (scale_voltage, int, 0644); +module_param(scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); /* Force revision key to 0 for processors which doesn't * support voltage scaling, but are introducing itself as @@ -1019,9 +1022,9 @@ MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); module_param(revid_errata, int, 0644); MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); -MODULE_AUTHOR ("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); +MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors."); +MODULE_LICENSE("GPL"); late_initcall(longhaul_init); module_exit(longhaul_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h index 4fcc320997df..e2360a469f79 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.h +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.h @@ -49,14 +49,14 @@ union msr_longhaul { /* * Clock ratio tables. Div/Mod by 10 to get ratio. - * The eblcr ones specify the ratio read from the CPU. - * The clock_ratio ones specify what to write to the CPU. + * The eblcr values specify the ratio read from the CPU. + * The mults values specify what to write to the CPU. */ /* * VIA C3 Samuel 1 & Samuel 2 (stepping 0) */ -static const int __initdata samuel1_clock_ratio[16] = { +static const int __initdata samuel1_mults[16] = { -1, /* 0000 -> RESERVED */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -119,7 +119,7 @@ static const int __initdata samuel2_eblcr[16] = { /* * VIA C3 Ezra */ -static const int __initdata ezra_clock_ratio[16] = { +static const int __initdata ezra_mults[16] = { 100, /* 0000 -> 10.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -160,7 +160,7 @@ static const int __initdata ezra_eblcr[16] = { /* * VIA C3 (Ezra-T) [C5M]. */ -static const int __initdata ezrat_clock_ratio[32] = { +static const int __initdata ezrat_mults[32] = { 100, /* 0000 -> 10.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -235,7 +235,7 @@ static const int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ -static const int __initdata nehemiah_clock_ratio[32] = { +static const int __initdata nehemiah_mults[32] = { 100, /* 0000 -> 10.0x */ -1, /* 0001 -> 16.0x */ 40, /* 0010 -> 4.0x */ diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c index 777a7ff075de..da5f70fcb766 100644 --- a/arch/x86/kernel/cpu/cpufreq/longrun.c +++ b/arch/x86/kernel/cpu/cpufreq/longrun.c @@ -11,12 +11,13 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/cpufreq.h> +#include <linux/timex.h> #include <asm/msr.h> #include <asm/processor.h> -#include <asm/timex.h> -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "longrun", msg) static struct cpufreq_driver longrun_driver; @@ -51,7 +52,7 @@ static void __init longrun_get_policy(struct cpufreq_policy *policy) msr_lo &= 0x0000007F; msr_hi &= 0x0000007F; - if ( longrun_high_freq <= longrun_low_freq ) { + if (longrun_high_freq <= longrun_low_freq) { /* Assume degenerate Longrun table */ policy->min = policy->max = longrun_high_freq; } else { @@ -79,7 +80,7 @@ static int longrun_set_policy(struct cpufreq_policy *policy) if (!policy) return -EINVAL; - if ( longrun_high_freq <= longrun_low_freq ) { + if (longrun_high_freq <= longrun_low_freq) { /* Assume degenerate Longrun table */ pctg_lo = pctg_hi = 100; } else { @@ -152,7 +153,7 @@ static unsigned int longrun_get(unsigned int cpu) cpuid(0x80860007, &eax, &ebx, &ecx, &edx); dprintk("cpuid eax is %u\n", eax); - return (eax * 1000); + return eax * 1000; } /** @@ -196,7 +197,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); *high_freq = msr_lo * 1000; /* to kHz */ - dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq); + dprintk("longrun table interface told %u - %u kHz\n", + *low_freq, *high_freq); if (*low_freq > *high_freq) *low_freq = *high_freq; @@ -219,7 +221,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, cpuid(0x80860007, &eax, &ebx, &ecx, &edx); /* try decreasing in 10% steps, some processors react only * on some barrier values */ - for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) { + for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { /* set to 0 to try_hi perf_pctg */ msr_lo &= 0xFFFFFF80; msr_hi &= 0xFFFFFF80; @@ -236,7 +238,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) * eqals - * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) + * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) * * high_freq * perf_pctg is stored tempoarily into "ebx". */ @@ -317,9 +319,10 @@ static void __exit longrun_exit(void) } -MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " + "Efficeon processors."); +MODULE_LICENSE("GPL"); module_init(longrun_init); module_exit(longrun_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index 3178c3acd97e..41ed94915f97 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -27,15 +27,17 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/cpumask.h> +#include <linux/timex.h> #include <asm/processor.h> #include <asm/msr.h> -#include <asm/timex.h> +#include <asm/timer.h> #include "speedstep-lib.h" #define PFX "p4-clockmod: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "p4-clockmod", msg) /* * Duty Cycle (3bits), note DC_DISABLE is not specified in @@ -58,7 +60,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) { u32 l, h; - if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV)) + if (!cpu_online(cpu) || + (newstate > DC_DISABLE) || (newstate == DC_RESV)) return -EINVAL; rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); @@ -66,7 +69,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) if (l & 0x01) dprintk("CPU#%d currently thermal throttled\n", cpu); - if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT)) + if (has_N44_O17_errata[cpu] && + (newstate == DC_25PT || newstate == DC_DFLT)) newstate = DC_38PT; rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); @@ -112,7 +116,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; int i; - if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = cpufreq_p4_get(policy->cpu); @@ -127,7 +132,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } - /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software + /* run on each logical CPU, + * see section 13.15.3 of IA32 Intel Architecture Software * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) @@ -153,28 +159,30 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) { if (c->x86 == 0x06) { if (cpu_has(c, X86_FEATURE_EST)) - printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. " - "The acpi-cpufreq module offers voltage scaling" - " in addition of frequency scaling. You should use " - "that instead of p4-clockmod, if possible.\n"); + printk(KERN_WARNING PFX "Warning: EST-capable CPU " + "detected. The acpi-cpufreq module offers " + "voltage scaling in addition of frequency " + "scaling. You should use that instead of " + "p4-clockmod, if possible.\n"); switch (c->x86_model) { case 0x0E: /* Core */ case 0x0F: /* Core Duo */ case 0x16: /* Celeron Core */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE); + return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); case 0x0D: /* Pentium M (Dothan) */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; /* fall through */ case 0x09: /* Pentium M (Banias) */ - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM); + return speedstep_get_frequency(SPEEDSTEP_CPU_PM); } } if (c->x86 != 0xF) { if (!cpu_has(c, X86_FEATURE_EST)) - printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. " - "Please send an e-mail to <cpufreq@vger.kernel.org>\n"); + printk(KERN_WARNING PFX "Unknown CPU. " + "Please send an e-mail to " + "<cpufreq@vger.kernel.org>\n"); return 0; } @@ -182,16 +190,16 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) * throttling is active or not. */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) { + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " "The speedstep-ich or acpi cpufreq modules offer " "voltage scaling in addition of frequency scaling. " "You should use either one instead of p4-clockmod, " "if possible.\n"); - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M); + return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); } - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D); + return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); } @@ -217,14 +225,20 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) dprintk("has errata -- disabling low frequencies\n"); } + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && + c->x86_model < 2) { + /* switch to maximum frequency and measure result */ + cpufreq_p4_setdc(policy->cpu, DC_DISABLE); + recalibrate_cpu_khz(); + } /* get max frequency */ stock_freq = cpufreq_p4_get_frequency(c); if (!stock_freq) return -EINVAL; /* table init */ - for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if ((i<2) && (has_N44_O17_errata[policy->cpu])) + for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { + if ((i < 2) && (has_N44_O17_errata[policy->cpu])) p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; else p4clockmod_table[i].frequency = (stock_freq * i)/8; @@ -232,7 +246,10 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* assumed */ + + /* the transition latency is set to be 1 higher than the maximum + * transition latency of the ondemand governor */ + policy->cpuinfo.transition_latency = 10000001; policy->cur = stock_freq; return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); @@ -258,12 +275,12 @@ static unsigned int cpufreq_p4_get(unsigned int cpu) l = DC_DISABLE; if (l != DC_DISABLE) - return (stock_freq * l / 8); + return stock_freq * l / 8; return stock_freq; } -static struct freq_attr* p4clockmod_attr[] = { +static struct freq_attr *p4clockmod_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -298,9 +315,10 @@ static int __init cpufreq_p4_init(void) ret = cpufreq_register_driver(&p4clockmod_driver); if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); + printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " + "Modulation available\n"); - return (ret); + return ret; } @@ -310,9 +328,9 @@ static void __exit cpufreq_p4_exit(void) } -MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>"); -MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); +MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); +MODULE_LICENSE("GPL"); late_initcall(cpufreq_p4_init); module_exit(cpufreq_p4_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index c1ac5790c63e..f10dea409f40 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -1,6 +1,7 @@ /* * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. + * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, + * Dominik Brodowski. * * Licensed under the terms of the GNU GPL License version 2. * @@ -13,14 +14,15 @@ #include <linux/cpufreq.h> #include <linux/ioport.h> #include <linux/slab.h> - -#include <asm/msr.h> #include <linux/timex.h> #include <linux/io.h> +#include <asm/msr.h> + #define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long as it is unused */ +#define PFX "powernow-k6: " static unsigned int busfreq; /* FSB, in 10 kHz */ static unsigned int max_multiplier; @@ -47,8 +49,8 @@ static struct cpufreq_frequency_table clock_ratio[] = { */ static int powernow_k6_get_cpu_multiplier(void) { - u64 invalue = 0; - u32 msrval; + u64 invalue = 0; + u32 msrval; msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ @@ -68,12 +70,12 @@ static int powernow_k6_get_cpu_multiplier(void) */ static void powernow_k6_set_state(unsigned int best_i) { - unsigned long outvalue = 0, invalue = 0; - unsigned long msrval; - struct cpufreq_freqs freqs; + unsigned long outvalue = 0, invalue = 0; + unsigned long msrval; + struct cpufreq_freqs freqs; if (clock_ratio[best_i].index > max_multiplier) { - printk(KERN_ERR "cpufreq: invalid target frequency\n"); + printk(KERN_ERR PFX "invalid target frequency\n"); return; } @@ -119,7 +121,8 @@ static int powernow_k6_verify(struct cpufreq_policy *policy) * powernow_k6_setpolicy - sets a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * sets a new CPUFreq policy */ @@ -127,9 +130,10 @@ static int powernow_k6_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &clock_ratio[0], + target_freq, relation, &newstate)) return -EINVAL; powernow_k6_set_state(newstate); @@ -140,7 +144,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy, static int powernow_k6_cpu_init(struct cpufreq_policy *policy) { - unsigned int i; + unsigned int i, f; int result; if (policy->cpu != 0) @@ -152,10 +156,11 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) /* table init */ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - if (clock_ratio[i].index > max_multiplier) + f = clock_ratio[i].index; + if (f > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else - clock_ratio[i].frequency = busfreq * clock_ratio[i].index; + clock_ratio[i].frequency = busfreq * f; } /* cpuinfo and default policy values */ @@ -185,7 +190,9 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) static unsigned int powernow_k6_get(unsigned int cpu) { - return busfreq * powernow_k6_get_cpu_multiplier(); + unsigned int ret; + ret = (busfreq * powernow_k6_get_cpu_multiplier()); + return ret; } static struct freq_attr *powernow_k6_attr[] = { @@ -221,7 +228,7 @@ static int __init powernow_k6_init(void) return -ENODEV; if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk("cpufreq: PowerNow IOPORT region already used.\n"); + printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); return -EIO; } @@ -246,7 +253,8 @@ static void __exit powernow_k6_exit(void) } -MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>"); +MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, " + "Dominik Brodowski <linux@brodo.de>"); MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index 1b446d79a8fd..3c28ccd49742 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -6,10 +6,12 @@ * Licensed under the terms of the GNU GPL License version 2. * Based upon datasheets & sample CPUs kindly provided by AMD. * - * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt. - * - We cli/sti on stepping A0 CPUs around the FID/VID transition. - * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect. - * - We disable half multipliers if ACPI is used on A0 stepping CPUs. + * Errata 5: + * CPU may fail to execute a FID/VID change in presence of interrupt. + * - We cli/sti on stepping A0 CPUs around the FID/VID transition. + * Errata 15: + * CPU with half frequency multipliers may hang upon wakeup from disconnect. + * - We disable half multipliers if ACPI is used on A0 stepping CPUs. */ #include <linux/kernel.h> @@ -20,11 +22,11 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/dmi.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ #include <asm/msr.h> -#include <asm/timer.h> -#include <asm/timex.h> -#include <asm/io.h> #include <asm/system.h> #ifdef CONFIG_X86_POWERNOW_K7_ACPI @@ -58,9 +60,9 @@ struct pst_s { union powernow_acpi_control_t { struct { unsigned long fid:5, - vid:5, - sgtc:20, - res1:2; + vid:5, + sgtc:20, + res1:2; } bits; unsigned long val; }; @@ -94,14 +96,15 @@ static struct cpufreq_frequency_table *powernow_table; static unsigned int can_scale_bus; static unsigned int can_scale_vid; -static unsigned int minimum_speed=-1; +static unsigned int minimum_speed = -1; static unsigned int maximum_speed; static unsigned int number_scales; static unsigned int fsb; static unsigned int latency; static char have_a0; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "powernow-k7", msg) static int check_fsb(unsigned int fsbspeed) { @@ -109,7 +112,7 @@ static int check_fsb(unsigned int fsbspeed) unsigned int f = fsb / 1000; delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; - return (delta < 5); + return delta < 5; } static int check_powernow(void) @@ -117,24 +120,26 @@ static int check_powernow(void) struct cpuinfo_x86 *c = &cpu_data(0); unsigned int maxei, eax, ebx, ecx, edx; - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) { + if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) { #ifdef MODULE - printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n"); + printk(KERN_INFO PFX "This module only works with " + "AMD K7 CPUs\n"); #endif return 0; } /* Get maximum capabilities */ - maxei = cpuid_eax (0x80000000); + maxei = cpuid_eax(0x80000000); if (maxei < 0x80000007) { /* Any powernow info ? */ #ifdef MODULE - printk (KERN_INFO PFX "No powernow capabilities detected\n"); + printk(KERN_INFO PFX "No powernow capabilities detected\n"); #endif return 0; } if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n"); + printk(KERN_INFO PFX "K7 660[A0] core detected, " + "enabling errata workarounds\n"); have_a0 = 1; } @@ -144,37 +149,42 @@ static int check_powernow(void) if (!(edx & (1 << 1 | 1 << 2))) return 0; - printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); + printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); if (edx & 1 << 1) { - printk ("frequency"); - can_scale_bus=1; + printk("frequency"); + can_scale_bus = 1; } if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk (" and "); + printk(" and "); if (edx & 1 << 2) { - printk ("voltage"); - can_scale_vid=1; + printk("voltage"); + can_scale_vid = 1; } - printk (".\n"); + printk(".\n"); return 1; } +static void invalidate_entry(unsigned int entry) +{ + powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} -static int get_ranges (unsigned char *pst) +static int get_ranges(unsigned char *pst) { unsigned int j; unsigned int speed; u8 fid, vid; - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * + (number_scales + 1)), GFP_KERNEL); if (!powernow_table) return -ENOMEM; - for (j=0 ; j < number_scales; j++) { + for (j = 0 ; j < number_scales; j++) { fid = *pst++; powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; @@ -182,10 +192,10 @@ static int get_ranges (unsigned char *pst) speed = powernow_table[j].frequency; - if ((fid_codes[fid] % 10)==5) { + if ((fid_codes[fid] % 10) == 5) { #ifdef CONFIG_X86_POWERNOW_K7_ACPI if (have_a0 == 1) - powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(j); #endif } @@ -197,7 +207,7 @@ static int get_ranges (unsigned char *pst) vid = *pst++; powernow_table[j].index |= (vid << 8); /* upper 8 bits */ - dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " + dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, @@ -214,13 +224,13 @@ static void change_FID(int fid) { union msr_fidvidctl fidvidctl; - rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); if (fidvidctl.bits.FID != fid) { fidvidctl.bits.SGTC = latency; fidvidctl.bits.FID = fid; fidvidctl.bits.VIDC = 0; fidvidctl.bits.FIDC = 1; - wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); } } @@ -229,18 +239,18 @@ static void change_VID(int vid) { union msr_fidvidctl fidvidctl; - rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); if (fidvidctl.bits.VID != vid) { fidvidctl.bits.SGTC = latency; fidvidctl.bits.VID = vid; fidvidctl.bits.FIDC = 0; fidvidctl.bits.VIDC = 1; - wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); } } -static void change_speed (unsigned int index) +static void change_speed(unsigned int index) { u8 fid, vid; struct cpufreq_freqs freqs; @@ -257,7 +267,7 @@ static void change_speed (unsigned int index) freqs.cpu = 0; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; freqs.old = fsb * fid_codes[cfid] / 10; @@ -321,12 +331,14 @@ static int powernow_acpi_init(void) goto err1; } - if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { + if (acpi_processor_perf->control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { retval = -ENODEV; goto err2; } - if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { + if (acpi_processor_perf->status_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { retval = -ENODEV; goto err2; } @@ -338,7 +350,8 @@ static int powernow_acpi_init(void) goto err2; } - powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * + (number_scales + 1)), GFP_KERNEL); if (!powernow_table) { retval = -ENOMEM; goto err2; @@ -352,7 +365,7 @@ static int powernow_acpi_init(void) unsigned int speed, speed_mhz; pc.val = (unsigned long) state->control; - dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", + dprintk("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", i, (u32) state->core_frequency, (u32) state->power, @@ -381,12 +394,12 @@ static int powernow_acpi_init(void) if (speed % 1000 > 0) speed_mhz++; - if ((fid_codes[fid] % 10)==5) { + if ((fid_codes[fid] % 10) == 5) { if (have_a0 == 1) - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(i); } - dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " + dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, fid_codes[fid] % 10, speed_mhz, vid, mobile_vid_table[vid]/1000, @@ -422,7 +435,8 @@ err1: err05: kfree(acpi_processor_perf); err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n"); + printk(KERN_WARNING PFX "ACPI perflib can not be used on " + "this platform\n"); acpi_processor_perf = NULL; return retval; } @@ -435,7 +449,14 @@ static int powernow_acpi_init(void) } #endif -static int powernow_decode_bios (int maxfid, int startvid) +static void print_pst_entry(struct pst_s *pst, unsigned int j) +{ + dprintk("PST:%d (@%p)\n", j, pst); + dprintk(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); +} + +static int powernow_decode_bios(int maxfid, int startvid) { struct psb_s *psb; struct pst_s *pst; @@ -446,61 +467,67 @@ static int powernow_decode_bios (int maxfid, int startvid) etuple = cpuid_eax(0x80000001); - for (i=0xC0000; i < 0xffff0 ; i+=16) { + for (i = 0xC0000; i < 0xffff0 ; i += 16) { p = phys_to_virt(i); - if (memcmp(p, "AMDK7PNOW!", 10) == 0){ - dprintk ("Found PSB header at %p\n", p); + if (memcmp(p, "AMDK7PNOW!", 10) == 0) { + dprintk("Found PSB header at %p\n", p); psb = (struct psb_s *) p; - dprintk ("Table version: 0x%x\n", psb->tableversion); + dprintk("Table version: 0x%x\n", psb->tableversion); if (psb->tableversion != 0x12) { - printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n"); + printk(KERN_INFO PFX "Sorry, only v1.2 tables" + " supported right now\n"); return -ENODEV; } - dprintk ("Flags: 0x%x\n", psb->flags); - if ((psb->flags & 1)==0) { - dprintk ("Mobile voltage regulator\n"); - } else { - dprintk ("Desktop voltage regulator\n"); - } + dprintk("Flags: 0x%x\n", psb->flags); + if ((psb->flags & 1) == 0) + dprintk("Mobile voltage regulator\n"); + else + dprintk("Desktop voltage regulator\n"); latency = psb->settlingtime; if (latency < 100) { - printk(KERN_INFO PFX "BIOS set settling time to %d microseconds. " - "Should be at least 100. Correcting.\n", latency); + printk(KERN_INFO PFX "BIOS set settling time " + "to %d microseconds. " + "Should be at least 100. " + "Correcting.\n", latency); latency = 100; } - dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime); - dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst); + dprintk("Settling Time: %d microseconds.\n", + psb->settlingtime); + dprintk("Has %d PST tables. (Only dumping ones " + "relevant to this CPU).\n", + psb->numpst); - p += sizeof (struct psb_s); + p += sizeof(struct psb_s); pst = (struct pst_s *) p; - for (j=0; j<psb->numpst; j++) { + for (j = 0; j < psb->numpst; j++) { pst = (struct pst_s *) p; number_scales = pst->numpstates; - if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) && - (maxfid==pst->maxfid) && (startvid==pst->startvid)) - { - dprintk ("PST:%d (@%p)\n", j, pst); - dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", - pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); - - ret = get_ranges ((char *) pst + sizeof (struct pst_s)); + if ((etuple == pst->cpuid) && + check_fsb(pst->fsbspeed) && + (maxfid == pst->maxfid) && + (startvid == pst->startvid)) { + print_pst_entry(pst, j); + p = (char *)pst + sizeof(struct pst_s); + ret = get_ranges(p); return ret; } else { unsigned int k; - p = (char *) pst + sizeof (struct pst_s); - for (k=0; k<number_scales; k++) - p+=2; + p = (char *)pst + sizeof(struct pst_s); + for (k = 0; k < number_scales; k++) + p += 2; } } - printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple); - printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n"); + printk(KERN_INFO PFX "No PST tables match this cpuid " + "(0x%x)\n", etuple); + printk(KERN_INFO PFX "This is indicative of a broken " + "BIOS.\n"); return -EINVAL; } @@ -511,13 +538,14 @@ static int powernow_decode_bios (int maxfid, int startvid) } -static int powernow_target (struct cpufreq_policy *policy, +static int powernow_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate; - if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, + relation, &newstate)) return -EINVAL; change_speed(newstate); @@ -526,7 +554,7 @@ static int powernow_target (struct cpufreq_policy *policy, } -static int powernow_verify (struct cpufreq_policy *policy) +static int powernow_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, powernow_table); } @@ -566,18 +594,23 @@ static unsigned int powernow_get(unsigned int cpu) if (cpu) return 0; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; - return (fsb * fid_codes[cfid] / 10); + return fsb * fid_codes[cfid] / 10; } static int __init acer_cpufreq_pst(const struct dmi_system_id *d) { - printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident); - printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n"); + printk(KERN_WARNING PFX + "%s laptop with broken PST tables in BIOS detected.\n", + d->ident); + printk(KERN_WARNING PFX + "You need to downgrade to 3A21 (09/09/2002), or try a newer " + "BIOS than 3A71 (01/20/2003)\n"); + printk(KERN_WARNING PFX + "cpufreq scaling has been disabled as a result of this.\n"); return 0; } @@ -598,7 +631,7 @@ static struct dmi_system_id __initdata powernow_dmi_table[] = { { } }; -static int __init powernow_cpu_init (struct cpufreq_policy *policy) +static int __init powernow_cpu_init(struct cpufreq_policy *policy) { union msr_fidvidstatus fidvidstatus; int result; @@ -606,7 +639,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) if (policy->cpu != 0) return -ENODEV; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); recalibrate_cpu_khz(); @@ -618,19 +651,21 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) dprintk("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); + printk(KERN_INFO PFX "PSB/PST known to be broken. " + "Trying ACPI instead\n"); result = powernow_acpi_init(); } else { - result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID); + result = powernow_decode_bios(fidvidstatus.bits.MFID, + fidvidstatus.bits.SVID); if (result) { - printk (KERN_INFO PFX "Trying ACPI perflib\n"); + printk(KERN_INFO PFX "Trying ACPI perflib\n"); maximum_speed = 0; minimum_speed = -1; latency = 0; result = powernow_acpi_init(); if (result) { - printk (KERN_INFO PFX "ACPI and legacy methods failed\n"); - printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n"); + printk(KERN_INFO PFX + "ACPI and legacy methods failed\n"); } } else { /* SGTC use the bus clock as timer */ @@ -642,10 +677,11 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) if (result) return result; - printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", + printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", minimum_speed/1000, maximum_speed/1000); - policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); + policy->cpuinfo.transition_latency = + cpufreq_scale(2000000UL, fsb, latency); policy->cur = powernow_get(0); @@ -654,7 +690,8 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) return cpufreq_frequency_table_cpuinfo(policy, powernow_table); } -static int powernow_cpu_exit (struct cpufreq_policy *policy) { +static int powernow_cpu_exit(struct cpufreq_policy *policy) +{ cpufreq_frequency_table_put_attr(policy->cpu); #ifdef CONFIG_X86_POWERNOW_K7_ACPI @@ -669,7 +706,7 @@ static int powernow_cpu_exit (struct cpufreq_policy *policy) { return 0; } -static struct freq_attr* powernow_table_attr[] = { +static struct freq_attr *powernow_table_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -685,15 +722,15 @@ static struct cpufreq_driver powernow_driver = { .attr = powernow_table_attr, }; -static int __init powernow_init (void) +static int __init powernow_init(void) { - if (check_powernow()==0) + if (check_powernow() == 0) return -ENODEV; return cpufreq_register_driver(&powernow_driver); } -static void __exit powernow_exit (void) +static void __exit powernow_exit(void) { cpufreq_unregister_driver(&powernow_driver); } @@ -701,9 +738,9 @@ static void __exit powernow_exit (void) module_param(acpi_force, int, 0444); MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); -MODULE_AUTHOR ("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); +MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); +MODULE_LICENSE("GPL"); late_initcall(powernow_init); module_exit(powernow_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 6428aa17b40e..a15ac94e0b9b 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -33,16 +33,14 @@ #include <linux/string.h> #include <linux/cpumask.h> #include <linux/sched.h> /* for current / set_cpus_allowed() */ +#include <linux/io.h> +#include <linux/delay.h> #include <asm/msr.h> -#include <asm/io.h> -#include <asm/delay.h> -#ifdef CONFIG_X86_POWERNOW_K8_ACPI #include <linux/acpi.h> #include <linux/mutex.h> #include <acpi/processor.h> -#endif #define PFX "powernow-k8: " #define VERSION "version 2.20.00" @@ -71,7 +69,8 @@ static u32 find_khz_freq_from_fid(u32 fid) return 1000 * find_freq_from_fid(fid); } -static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate) +static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, + u32 pstate) { return data[pstate].frequency; } @@ -186,7 +185,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) return 1; } - lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; + lo = fid; + lo |= (data->currvid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n", fid, lo, data->plllock * PLL_LOCK_CONVERSION); @@ -194,7 +195,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) do { wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); if (i++ > 100) { - printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n"); + printk(KERN_ERR PFX + "Hardware error - pending bit very stuck - " + "no further pstate changes possible\n"); return 1; } } while (query_current_values_with_pending_wait(data)); @@ -202,14 +205,16 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) count_off_irt(data); if (savevid != data->currvid) { - printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n", - savevid, data->currvid); + printk(KERN_ERR PFX + "vid change on fid trans, old 0x%x, new 0x%x\n", + savevid, data->currvid); return 1; } if (fid != data->currfid) { - printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid, - data->currfid); + printk(KERN_ERR PFX + "fid trans failed, fid 0x%x, curr 0x%x\n", fid, + data->currfid); return 1; } @@ -228,7 +233,9 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) return 1; } - lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; + lo = data->currfid; + lo |= (vid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n", vid, lo, STOP_GRANT_5NS); @@ -236,20 +243,24 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) do { wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); if (i++ > 100) { - printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n"); + printk(KERN_ERR PFX "internal error - pending bit " + "very stuck - no further pstate " + "changes possible\n"); return 1; } } while (query_current_values_with_pending_wait(data)); if (savefid != data->currfid) { - printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n", + printk(KERN_ERR PFX "fid changed on vid trans, old " + "0x%x new 0x%x\n", savefid, data->currfid); return 1; } if (vid != data->currvid) { - printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid, - data->currvid); + printk(KERN_ERR PFX "vid trans failed, vid 0x%x, " + "curr 0x%x\n", + vid, data->currvid); return 1; } @@ -261,7 +272,8 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) * Decreasing vid codes represent increasing voltages: * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. */ -static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step) +static int decrease_vid_code_by_step(struct powernow_k8_data *data, + u32 reqvid, u32 step) { if ((data->currvid - reqvid) > step) reqvid = data->currvid - step; @@ -283,7 +295,8 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate) } /* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ -static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid) +static int transition_fid_vid(struct powernow_k8_data *data, + u32 reqfid, u32 reqvid) { if (core_voltage_pre_transition(data, reqvid)) return 1; @@ -298,7 +311,8 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req return 1; if ((reqfid != data->currfid) || (reqvid != data->currvid)) { - printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", + printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, " + "curr 0x%x 0x%x\n", smp_processor_id(), reqfid, reqvid, data->currfid, data->currvid); return 1; @@ -311,13 +325,15 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req } /* Phase 1 - core voltage transition ... setup voltage */ -static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid) +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid) { u32 rvosteps = data->rvo; u32 savefid = data->currfid; u32 maxvid, lo; - dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", + dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " + "reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); @@ -340,7 +356,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid } else { dprintk("ph1: changing vid for rvo, req 0x%x\n", data->currvid - 1); - if (decrease_vid_code_by_step(data, data->currvid - 1, 1)) + if (decrease_vid_code_by_step(data, data->currvid-1, 1)) return 1; rvosteps--; } @@ -350,7 +366,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid return 1; if (savefid != data->currfid) { - printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid); + printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", + data->currfid); return 1; } @@ -363,20 +380,24 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid /* Phase 2 - core frequency transition */ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) { - u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid; + u32 vcoreqfid, vcocurrfid, vcofiddiff; + u32 fid_interval, savevid = data->currvid; - if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n", - reqfid, data->currfid); + if ((reqfid < HI_FID_TABLE_BOTTOM) && + (data->currfid < HI_FID_TABLE_BOTTOM)) { + printk(KERN_ERR PFX "ph2: illegal lo-lo transition " + "0x%x 0x%x\n", reqfid, data->currfid); return 1; } if (data->currfid == reqfid) { - printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid); + printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", + data->currfid); return 0; } - dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n", + dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, " + "reqfid 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqfid); @@ -390,14 +411,14 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) if (reqfid > data->currfid) { if (data->currfid > LO_FID_TABLE_TOP) { - if (write_new_fid(data, data->currfid + fid_interval)) { + if (write_new_fid(data, + data->currfid + fid_interval)) return 1; - } } else { if (write_new_fid - (data, 2 + convert_fid_to_vco_fid(data->currfid))) { + (data, + 2 + convert_fid_to_vco_fid(data->currfid))) return 1; - } } } else { if (write_new_fid(data, data->currfid - fid_interval)) @@ -417,7 +438,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) if (data->currfid != reqfid) { printk(KERN_ERR PFX - "ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", + "ph2: mismatch, failed fid transition, " + "curr 0x%x, req 0x%x\n", data->currfid, reqfid); return 1; } @@ -435,7 +457,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) } /* Phase 3 - core voltage transition flow ... jump to the final vid. */ -static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid) +static int core_voltage_post_transition(struct powernow_k8_data *data, + u32 reqvid) { u32 savefid = data->currfid; u32 savereqvid = reqvid; @@ -457,7 +480,8 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi if (data->currvid != reqvid) { printk(KERN_ERR PFX - "ph3: failed vid transition\n, req 0x%x, curr 0x%x", + "ph3: failed vid transition\n, " + "req 0x%x, curr 0x%x", reqvid, data->currvid); return 1; } @@ -508,7 +532,8 @@ static int check_supported_cpu(unsigned int cpu) if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { - printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); + printk(KERN_INFO PFX + "Processor cpuid %x not supported\n", eax); goto out; } @@ -520,8 +545,10 @@ static int check_supported_cpu(unsigned int cpu) } cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) { - printk(KERN_INFO PFX "Power state transitions not supported\n"); + if ((edx & P_STATE_TRANSITION_CAPABLE) + != P_STATE_TRANSITION_CAPABLE) { + printk(KERN_INFO PFX + "Power state transitions not supported\n"); goto out; } } else { /* must be a HW Pstate capable processor */ @@ -539,7 +566,8 @@ out: return rc; } -static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) +static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, + u8 maxvid) { unsigned int j; u8 lastfid = 0xff; @@ -550,12 +578,14 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 j, pst[j].vid); return -EINVAL; } - if (pst[j].vid < data->rvo) { /* vid + rvo >= 0 */ + if (pst[j].vid < data->rvo) { + /* vid + rvo >= 0 */ printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate" " %d\n", j); return -ENODEV; } - if (pst[j].vid < maxvid + data->rvo) { /* vid + rvo >= maxvid */ + if (pst[j].vid < maxvid + data->rvo) { + /* vid + rvo >= maxvid */ printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate" " %d\n", j); return -ENODEV; @@ -579,23 +609,31 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 return -EINVAL; } if (lastfid > LO_FID_TABLE_TOP) - printk(KERN_INFO FW_BUG PFX "first fid not from lo freq table\n"); + printk(KERN_INFO FW_BUG PFX + "first fid not from lo freq table\n"); return 0; } +static void invalidate_entry(struct powernow_k8_data *data, unsigned int entry) +{ + data->powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} + static void print_basics(struct powernow_k8_data *data) { int j; for (j = 0; j < data->numps; j++) { - if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) { + if (data->powernow_table[j].frequency != + CPUFREQ_ENTRY_INVALID) { if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX " %d : pstate %d (%d MHz)\n", - j, + printk(KERN_INFO PFX + " %d : pstate %d (%d MHz)\n", j, data->powernow_table[j].index, data->powernow_table[j].frequency/1000); } else { - printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", + printk(KERN_INFO PFX + " %d : fid 0x%x (%d MHz), vid 0x%x\n", j, data->powernow_table[j].index & 0xff, data->powernow_table[j].frequency/1000, @@ -604,20 +642,25 @@ static void print_basics(struct powernow_k8_data *data) } } if (data->batps) - printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps); + printk(KERN_INFO PFX "Only %d pstates on battery\n", + data->batps); } -static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) +static int fill_powernow_table(struct powernow_k8_data *data, + struct pst_s *pst, u8 maxvid) { struct cpufreq_frequency_table *powernow_table; unsigned int j; - if (data->batps) { /* use ACPI support to get full speed on mains power */ - printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps); + if (data->batps) { + /* use ACPI support to get full speed on mains power */ + printk(KERN_WARNING PFX + "Only %d pstates usable (use ACPI driver for full " + "range\n", data->batps); data->numps = data->batps; } - for ( j=1; j<data->numps; j++ ) { + for (j = 1; j < data->numps; j++) { if (pst[j-1].fid >= pst[j].fid) { printk(KERN_ERR PFX "PST out of sequence\n"); return -EINVAL; @@ -640,9 +683,11 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, } for (j = 0; j < data->numps; j++) { + int freq; powernow_table[j].index = pst[j].fid; /* lower 8 bits */ powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ - powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid); + freq = find_khz_freq_from_fid(pst[j].fid); + powernow_table[j].frequency = freq; } powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; powernow_table[data->numps].index = 0; @@ -658,7 +703,8 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, print_basics(data); for (j = 0; j < data->numps; j++) - if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid)) + if ((pst[j].fid == data->currfid) && + (pst[j].vid == data->currvid)) return 0; dprintk("currfid/vid do not match PST, ignoring\n"); @@ -698,7 +744,8 @@ static int find_psb_table(struct powernow_k8_data *data) } data->vstable = psb->vstable; - dprintk("voltage stabilization time: %d(*20us)\n", data->vstable); + dprintk("voltage stabilization time: %d(*20us)\n", + data->vstable); dprintk("flags2: 0x%x\n", psb->flags2); data->rvo = psb->flags2 & 3; @@ -713,11 +760,12 @@ static int find_psb_table(struct powernow_k8_data *data) dprintk("numpst: 0x%x\n", psb->num_tables); cpst = psb->num_tables; - if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){ + if ((psb->cpuid == 0x00000fc0) || + (psb->cpuid == 0x00000fe0)) { thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) { + if ((thiscpuid == 0x00000fc0) || + (thiscpuid == 0x00000fe0)) cpst = 1; - } } if (cpst != 1) { printk(KERN_ERR FW_BUG PFX "numpst must be 1\n"); @@ -732,7 +780,8 @@ static int find_psb_table(struct powernow_k8_data *data) data->numps = psb->numps; dprintk("numpstates: 0x%x\n", data->numps); - return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid); + return fill_powernow_table(data, + (struct pst_s *)(psb+1), maxvid); } /* * If you see this message, complain to BIOS manufacturer. If @@ -745,28 +794,31 @@ static int find_psb_table(struct powernow_k8_data *data) * BIOS and Kernel Developer's Guide, which is available on * www.amd.com */ - printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n"); + printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n"); return -ENODEV; } -#ifdef CONFIG_X86_POWERNOW_K8_ACPI -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, + unsigned int index) { + acpi_integer control; + if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) return; - data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK; - data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK; - data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; - data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK; - data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK); - data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK; -} + control = data->acpi_data.states[index].control; data->irt = (control + >> IRT_SHIFT) & IRT_MASK; data->rvo = (control >> + RVO_SHIFT) & RVO_MASK; data->exttype = (control + >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; + data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; data->vidmvs = 1 + << ((control >> MVS_SHIFT) & MVS_MASK); data->vstable = + (control >> VST_SHIFT) & VST_MASK; } static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { struct cpufreq_frequency_table *powernow_table; int ret_val = -ENODEV; + acpi_integer space_id; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { dprintk("register performance failed: bad ACPI data\n"); @@ -779,11 +831,12 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) goto err_out; } - if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + space_id = data->acpi_data.control_register.space_id; + if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { dprintk("Invalid control/status registers (%x - %x)\n", data->acpi_data.control_register.space_id, - data->acpi_data.status_register.space_id); + space_id); goto err_out; } @@ -802,7 +855,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) if (ret_val) goto err_out_mem; - powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; + powernow_table[data->acpi_data.state_count].frequency = + CPUFREQ_TABLE_END; powernow_table[data->acpi_data.state_count].index = 0; data->powernow_table = powernow_table; @@ -830,13 +884,15 @@ err_out_mem: err_out: acpi_processor_unregister_performance(&data->acpi_data, data->cpu); - /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */ + /* data->acpi_data.state_count informs us at ->exit() + * whether ACPI was used */ data->acpi_data.state_count = 0; return ret_val; } -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) +static int fill_powernow_table_pstate(struct powernow_k8_data *data, + struct cpufreq_frequency_table *powernow_table) { int i; u32 hi = 0, lo = 0; @@ -848,84 +904,101 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf index = data->acpi_data.states[i].control & HW_PSTATE_MASK; if (index > data->max_hw_pstate) { - printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index); - printk(KERN_ERR PFX "Please report to BIOS manufacturer\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + printk(KERN_ERR PFX "invalid pstate %d - " + "bad value %d.\n", i, index); + printk(KERN_ERR PFX "Please report to BIOS " + "manufacturer\n"); + invalidate_entry(data, i); continue; } rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); if (!(hi & HW_PSTATE_VALID_MASK)) { dprintk("invalid pstate %d, ignoring\n", index); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(data, i); continue; } powernow_table[i].index = index; - powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; + powernow_table[i].frequency = + data->acpi_data.states[i].core_frequency * 1000; } return 0; } -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, + struct cpufreq_frequency_table *powernow_table) { int i; int cntlofreq = 0; + for (i = 0; i < data->acpi_data.state_count; i++) { u32 fid; u32 vid; + u32 freq, index; + acpi_integer status, control; if (data->exttype) { - fid = data->acpi_data.states[i].status & EXT_FID_MASK; - vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK; + status = data->acpi_data.states[i].status; + fid = status & EXT_FID_MASK; + vid = (status >> VID_SHIFT) & EXT_VID_MASK; } else { - fid = data->acpi_data.states[i].control & FID_MASK; - vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; + control = data->acpi_data.states[i].control; + fid = control & FID_MASK; + vid = (control >> VID_SHIFT) & VID_MASK; } dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ - powernow_table[i].frequency = find_khz_freq_from_fid(fid); + index = fid | (vid<<8); + powernow_table[i].index = index; + + freq = find_khz_freq_from_fid(fid); + powernow_table[i].frequency = freq; /* verify frequency is OK */ - if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) || - (powernow_table[i].frequency < (MIN_FREQ * 1000))) { - dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { + dprintk("invalid freq %u kHz, ignoring\n", freq); + invalidate_entry(data, i); continue; } - /* verify voltage is OK - BIOSs are using "off" to indicate invalid */ + /* verify voltage is OK - + * BIOSs are using "off" to indicate invalid */ if (vid == VID_OFF) { dprintk("invalid vid %u, ignoring\n", vid); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(data, i); continue; } /* verify only 1 entry from the lo frequency table */ if (fid < HI_FID_TABLE_BOTTOM) { if (cntlofreq) { - /* if both entries are the same, ignore this one ... */ - if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || - (powernow_table[i].index != powernow_table[cntlofreq].index)) { - printk(KERN_ERR PFX "Too many lo freq table entries\n"); + /* if both entries are the same, + * ignore this one ... */ + if ((freq != powernow_table[cntlofreq].frequency) || + (index != powernow_table[cntlofreq].index)) { + printk(KERN_ERR PFX + "Too many lo freq table " + "entries\n"); return 1; } - dprintk("double low frequency table entry, ignoring it.\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + dprintk("double low frequency table entry, " + "ignoring it.\n"); + invalidate_entry(data, i); continue; } else cntlofreq = i; } - if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", - powernow_table[i].frequency, - (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { + printk(KERN_INFO PFX "invalid freq entries " + "%u kHz vs. %u kHz\n", freq, + (unsigned int) + (data->acpi_data.states[i].core_frequency + * 1000)); + invalidate_entry(data, i); continue; } } @@ -935,7 +1008,8 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { if (data->acpi_data.state_count) - acpi_processor_unregister_performance(&data->acpi_data, data->cpu); + acpi_processor_unregister_performance(&data->acpi_data, + data->cpu); free_cpumask_var(data->acpi_data.shared_cpu_map); } @@ -953,15 +1027,9 @@ static int get_transition_latency(struct powernow_k8_data *data) return 1000 * max_latency; } -#else -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; } -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; } -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; } -static int get_transition_latency(struct powernow_k8_data *data) { return 0; } -#endif /* CONFIG_X86_POWERNOW_K8_ACPI */ - /* Take a frequency, and issue the fid/vid transition command */ -static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index) +static int transition_frequency_fidvid(struct powernow_k8_data *data, + unsigned int index) { u32 fid = 0; u32 vid = 0; @@ -989,7 +1057,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i return 0; } - if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { + if ((fid < HI_FID_TABLE_BOTTOM) && + (data->currfid < HI_FID_TABLE_BOTTOM)) { printk(KERN_ERR PFX "ignoring illegal change in lo freq table-%x to 0x%x\n", data->currfid, fid); @@ -1017,7 +1086,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i } /* Take a frequency, and issue the hardware pstate transition command */ -static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index) +static int transition_frequency_pstate(struct powernow_k8_data *data, + unsigned int index) { u32 pstate = 0; int res, i; @@ -1029,7 +1099,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i pstate = index & HW_PSTATE_MASK; if (pstate > data->max_hw_pstate) return 0; - freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); + freqs.old = find_khz_freq_from_pstate(data->powernow_table, + data->currpstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); for_each_cpu_mask_nr(i, *(data->available_cores)) { @@ -1048,7 +1119,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i } /* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation) +static int powernowk8_target(struct cpufreq_policy *pol, + unsigned targfreq, unsigned relation) { cpumask_t oldmask; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); @@ -1087,14 +1159,18 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi dprintk("targ: curr fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); - if ((checkvid != data->currvid) || (checkfid != data->currfid)) { + if ((checkvid != data->currvid) || + (checkfid != data->currfid)) { printk(KERN_INFO PFX - "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", - checkfid, data->currfid, checkvid, data->currvid); + "error - out of sync, fix 0x%x 0x%x, " + "vid 0x%x 0x%x\n", + checkfid, data->currfid, + checkvid, data->currvid); } } - if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) + if (cpufreq_frequency_table_target(pol, data->powernow_table, + targfreq, relation, &newstate)) goto err_out; mutex_lock(&fidvid_mutex); @@ -1114,7 +1190,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi mutex_unlock(&fidvid_mutex); if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, + newstate); else pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -1141,6 +1218,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) struct powernow_k8_data *data; cpumask_t oldmask; int rc; + static int print_once; if (!cpu_online(pol->cpu)) return -ENODEV; @@ -1163,33 +1241,31 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { -#ifndef CONFIG_ACPI_PROCESSOR - printk(KERN_ERR PFX "ACPI Processor support is required " - "for SMP systems but is absent. Please load the " - "ACPI Processor module before starting this " - "driver.\n"); -#else - printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide" - " ACPI _PSS objects in a way that Linux " - "understands. Please report this to the Linux " - "ACPI maintainers and complain to your BIOS " - "vendor.\n"); -#endif - kfree(data); - return -ENODEV; + /* + * Replace this one with print_once as soon as such a + * thing gets introduced + */ + if (!print_once) { + WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS " + "does not provide ACPI _PSS objects " + "in a way that Linux understands. " + "Please report this to the Linux ACPI" + " maintainers and complain to your " + "BIOS vendor.\n"); + print_once++; + } + goto err_out; } if (pol->cpu != 0) { printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for " "CPU other than CPU0. Complain to your BIOS " "vendor.\n"); - kfree(data); - return -ENODEV; + goto err_out; } rc = find_psb_table(data); - if (rc) { - kfree(data); - return -ENODEV; - } + if (rc) + goto err_out; + /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ pol->cpuinfo.transition_latency = ( @@ -1204,16 +1280,16 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) if (smp_processor_id() != pol->cpu) { printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; + goto err_out_unmask; } if (pending_bit_stuck()) { printk(KERN_ERR PFX "failing init, change pending bit set\n"); - goto err_out; + goto err_out_unmask; } if (query_current_values_with_pending_wait(data)) - goto err_out; + goto err_out_unmask; if (cpu_family == CPU_OPTERON) fidvid_msr_init(); @@ -1228,7 +1304,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) data->available_cores = pol->cpus; if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, + data->currpstate); else pol->cur = find_khz_freq_from_fid(data->currfid); dprintk("policy current frequency %d kHz\n", pol->cur); @@ -1245,7 +1322,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate); + dprintk("cpu_init done, current pstate 0x%x\n", + data->currpstate); else dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1254,15 +1332,16 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) return 0; -err_out: +err_out_unmask: set_cpus_allowed_ptr(current, &oldmask); powernow_k8_cpu_exit_acpi(data); +err_out: kfree(data); return -ENODEV; } -static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) +static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) { struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); @@ -1279,7 +1358,7 @@ static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) return 0; } -static unsigned int powernowk8_get (unsigned int cpu) +static unsigned int powernowk8_get(unsigned int cpu) { struct powernow_k8_data *data; cpumask_t oldmask = current->cpus_allowed; @@ -1315,7 +1394,7 @@ out: return khz; } -static struct freq_attr* powernow_k8_attr[] = { +static struct freq_attr *powernow_k8_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -1360,7 +1439,8 @@ static void __exit powernowk8_exit(void) cpufreq_unregister_driver(&cpufreq_amd64_driver); } -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>"); +MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and " + "Mark Langsdorf <mark.langsdorf@amd.com>"); MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index 8ecc75b6c7c3..6c6698feade1 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -45,11 +45,10 @@ struct powernow_k8_data { * frequency is in kHz */ struct cpufreq_frequency_table *powernow_table; -#ifdef CONFIG_X86_POWERNOW_K8_ACPI /* the acpi table needs to be kept. it's only available if ACPI was * used to determine valid frequency/vid/fid states */ struct acpi_processor_performance acpi_data; -#endif + /* we need to keep track of associated cores, but let cpufreq * handle hotplug events - so just point at cpufreq pol->cpus * structure */ @@ -222,10 +221,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); -#ifdef CONFIG_X86_POWERNOW_K8_ACPI static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); -#endif #ifdef CONFIG_SMP static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c index 42da9bd677d6..435a996a613a 100644 --- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c +++ b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c @@ -19,17 +19,19 @@ #include <linux/delay.h> #include <linux/cpufreq.h> +#include <linux/timex.h> +#include <linux/io.h> #include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> #define MMCR_BASE 0xfffef000 /* The default base address */ #define OFFS_CPUCTL 0x2 /* CPU Control Register */ static __u8 __iomem *cpuctl; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "sc520_freq", msg) +#define PFX "sc520_freq: " static struct cpufreq_frequency_table sc520_freq_table[] = { {0x01, 100000}, @@ -43,7 +45,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) switch (clockspeed_reg & 0x03) { default: - printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + printk(KERN_ERR PFX "error: cpuctl register has unexpected " + "value %02x\n", clockspeed_reg); case 0x01: return 100000; case 0x02: @@ -51,7 +54,7 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) } } -static void sc520_freq_set_cpu_state (unsigned int state) +static void sc520_freq_set_cpu_state(unsigned int state) { struct cpufreq_freqs freqs; @@ -76,18 +79,19 @@ static void sc520_freq_set_cpu_state (unsigned int state) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); }; -static int sc520_freq_verify (struct cpufreq_policy *policy) +static int sc520_freq_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); } -static int sc520_freq_target (struct cpufreq_policy *policy, +static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, sc520_freq_table, + target_freq, relation, &newstate)) return -EINVAL; sc520_freq_set_cpu_state(newstate); @@ -116,7 +120,7 @@ static int sc520_freq_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); @@ -131,7 +135,7 @@ static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) } -static struct freq_attr* sc520_freq_attr[] = { +static struct freq_attr *sc520_freq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -155,13 +159,13 @@ static int __init sc520_freq_init(void) int err; /* Test if we have the right hardware */ - if(c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) { + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) { dprintk("no Elan SC520 processor found!\n"); return -ENODEV; } cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); - if(!cpuctl) { + if (!cpuctl) { printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); return -ENOMEM; } diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index dedc1e98f168..8bbb11adb315 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev; /* speedstep_processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor; static u32 pmbase; @@ -54,7 +54,8 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { }; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-ich", msg) /** @@ -62,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { * * Returns: -ENODEV if no register could be found */ -static int speedstep_find_register (void) +static int speedstep_find_register(void) { if (!speedstep_chipset_dev) return -ENODEV; @@ -90,7 +91,7 @@ static int speedstep_find_register (void) * * Tries to change the SpeedStep state. */ -static void speedstep_set_state (unsigned int state) +static void speedstep_set_state(unsigned int state) { u8 pm2_blk; u8 value; @@ -133,11 +134,11 @@ static void speedstep_set_state (unsigned int state) dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - if (state == (value & 0x1)) { - dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000)); - } else { - printk (KERN_ERR "cpufreq: change failed - I/O error\n"); - } + if (state == (value & 0x1)) + dprintk("change to %u MHz succeeded\n", + speedstep_get_frequency(speedstep_processor) / 1000); + else + printk(KERN_ERR "cpufreq: change failed - I/O error\n"); return; } @@ -149,7 +150,7 @@ static void speedstep_set_state (unsigned int state) * Tries to activate the SpeedStep status and control registers. * Returns -EINVAL on an unsupported chipset, and zero on success. */ -static int speedstep_activate (void) +static int speedstep_activate(void) { u16 value = 0; @@ -175,20 +176,18 @@ static int speedstep_activate (void) * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected * chipset, or zero on failure. */ -static unsigned int speedstep_detect_chipset (void) +static unsigned int speedstep_detect_chipset(void) { speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) return 4; /* 4-M */ speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) return 3; /* 3-M */ @@ -196,8 +195,7 @@ static unsigned int speedstep_detect_chipset (void) speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) { /* speedstep.c causes lockups on Dell Inspirons 8000 and @@ -208,8 +206,7 @@ static unsigned int speedstep_detect_chipset (void) hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_MC, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (!hostbridge) @@ -236,7 +233,7 @@ static unsigned int _speedstep_get(const struct cpumask *cpus) cpus_allowed = current->cpus_allowed; set_cpus_allowed_ptr(current, cpus); - speed = speedstep_get_processor_frequency(speedstep_processor); + speed = speedstep_get_frequency(speedstep_processor); set_cpus_allowed_ptr(current, &cpus_allowed); dprintk("detected %u kHz as current frequency\n", speed); return speed; @@ -251,11 +248,12 @@ static unsigned int speedstep_get(unsigned int cpu) * speedstep_target - set a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * Sets a new CPUFreq policy. */ -static int speedstep_target (struct cpufreq_policy *policy, +static int speedstep_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { @@ -264,7 +262,8 @@ static int speedstep_target (struct cpufreq_policy *policy, cpumask_t cpus_allowed; int i; - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = _speedstep_get(policy->cpus); @@ -308,7 +307,7 @@ static int speedstep_target (struct cpufreq_policy *policy, * Limit must be within speedstep_low_freq and speedstep_high_freq, with * at least one border included. */ -static int speedstep_verify (struct cpufreq_policy *policy) +static int speedstep_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); } @@ -344,7 +343,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) return -EIO; dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) + ? "low" : "high", (speed / 1000)); /* cpuinfo and default policy values */ @@ -352,9 +352,9 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); if (result) - return (result); + return result; - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); return 0; } @@ -366,7 +366,7 @@ static int speedstep_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* speedstep_attr[] = { +static struct freq_attr *speedstep_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -396,13 +396,15 @@ static int __init speedstep_init(void) /* detect processor */ speedstep_processor = speedstep_detect_processor(); if (!speedstep_processor) { - dprintk("Intel(R) SpeedStep(TM) capable processor not found\n"); + dprintk("Intel(R) SpeedStep(TM) capable processor " + "not found\n"); return -ENODEV; } /* detect chipset */ if (!speedstep_detect_chipset()) { - dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n"); + dprintk("Intel(R) SpeedStep(TM) for this chipset not " + "(yet) available.\n"); return -ENODEV; } @@ -431,9 +433,11 @@ static void __exit speedstep_exit(void) } -MODULE_AUTHOR ("Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones <davej@redhat.com>, " + "Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " + "with ICH-M southbridges."); +MODULE_LICENSE("GPL"); module_init(speedstep_init); module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index cdac7d62369b..2e3c6862657b 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -16,12 +16,16 @@ #include <linux/slab.h> #include <asm/msr.h> +#include <asm/tsc.h> #include "speedstep-lib.h" -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-lib", msg) + +#define PFX "speedstep-lib: " #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -static int relaxed_check = 0; +static int relaxed_check; #else #define relaxed_check 0 #endif @@ -30,14 +34,14 @@ static int relaxed_check = 0; * GET PROCESSOR CORE SPEED IN KHZ * *********************************************************************/ -static unsigned int pentium3_get_frequency (unsigned int processor) +static unsigned int pentium3_get_frequency(unsigned int processor) { - /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ + /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ struct { unsigned int ratio; /* Frequency Multiplier (x10) */ u8 bitmap; /* power on configuration bits [27, 25:22] (in MSR 0x2a) */ - } msr_decode_mult [] = { + } msr_decode_mult[] = { { 30, 0x01 }, { 35, 0x05 }, { 40, 0x02 }, @@ -52,7 +56,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) { 85, 0x26 }, { 90, 0x20 }, { 100, 0x2b }, - { 0, 0xff } /* error or unknown value */ + { 0, 0xff } /* error or unknown value */ }; /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ @@ -60,7 +64,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) unsigned int value; /* Front Side Bus speed in MHz */ u8 bitmap; /* power on configuration bits [18: 19] (in MSR 0x2a) */ - } msr_decode_fsb [] = { + } msr_decode_fsb[] = { { 66, 0x0 }, { 100, 0x2 }, { 133, 0x1 }, @@ -85,7 +89,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) } /* decode the multiplier */ - if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) { + if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { dprintk("workaround for early PIIIs\n"); msr_lo &= 0x03c00000; } else @@ -97,9 +101,10 @@ static unsigned int pentium3_get_frequency (unsigned int processor) j++; } - dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); + dprintk("speed is %u\n", + (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); - return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100); + return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; } @@ -112,20 +117,23 @@ static unsigned int pentiumM_get_frequency(void) /* see table B-2 of 24547212.pdf */ if (msr_lo & 0x00040000) { - printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp); + printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", + msr_lo, msr_tmp); return 0; } msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000)); + dprintk("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * 100 * 1000)); - return (msr_tmp * 100 * 1000); + return msr_tmp * 100 * 1000; } static unsigned int pentium_core_get_frequency(void) { u32 fsb = 0; u32 msr_lo, msr_tmp; + int ret; rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); /* see table B-2 of 25366920.pdf */ @@ -153,12 +161,15 @@ static unsigned int pentium_core_get_frequency(void) } rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", + msr_lo, msr_tmp); msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb)); + dprintk("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * fsb)); - return (msr_tmp * fsb); + ret = (msr_tmp * fsb); + return ret; } @@ -167,6 +178,16 @@ static unsigned int pentium4_get_frequency(void) struct cpuinfo_x86 *c = &boot_cpu_data; u32 msr_lo, msr_hi, mult; unsigned int fsb = 0; + unsigned int ret; + u8 fsb_code; + + /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency + * to System Bus Frequency Ratio Field in the Processor Frequency + * Configuration Register of the MSR. Therefore the current + * frequency cannot be calculated and has to be measured. + */ + if (c->x86_model < 2) + return cpu_khz; rdmsr(0x2c, msr_lo, msr_hi); @@ -177,62 +198,61 @@ static unsigned int pentium4_get_frequency(void) * revision #12 in Table B-1: MSRs in the Pentium 4 and * Intel Xeon Processors, on page B-4 and B-5. */ - if (c->x86_model < 2) + fsb_code = (msr_lo >> 16) & 0x7; + switch (fsb_code) { + case 0: fsb = 100 * 1000; - else { - u8 fsb_code = (msr_lo >> 16) & 0x7; - switch (fsb_code) { - case 0: - fsb = 100 * 1000; - break; - case 1: - fsb = 13333 * 10; - break; - case 2: - fsb = 200 * 1000; - break; - } + break; + case 1: + fsb = 13333 * 10; + break; + case 2: + fsb = 200 * 1000; + break; } if (!fsb) - printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n"); + printk(KERN_DEBUG PFX "couldn't detect FSB speed. " + "Please send an e-mail to <linux@brodo.de>\n"); /* Multiplier. */ mult = msr_lo >> 24; - dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult)); + dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", + fsb, mult, (fsb * mult)); - return (fsb * mult); + ret = (fsb * mult); + return ret; } -unsigned int speedstep_get_processor_frequency(unsigned int processor) +unsigned int speedstep_get_frequency(unsigned int processor) { switch (processor) { - case SPEEDSTEP_PROCESSOR_PCORE: + case SPEEDSTEP_CPU_PCORE: return pentium_core_get_frequency(); - case SPEEDSTEP_PROCESSOR_PM: + case SPEEDSTEP_CPU_PM: return pentiumM_get_frequency(); - case SPEEDSTEP_PROCESSOR_P4D: - case SPEEDSTEP_PROCESSOR_P4M: + case SPEEDSTEP_CPU_P4D: + case SPEEDSTEP_CPU_P4M: return pentium4_get_frequency(); - case SPEEDSTEP_PROCESSOR_PIII_T: - case SPEEDSTEP_PROCESSOR_PIII_C: - case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: return pentium3_get_frequency(processor); default: return 0; }; return 0; } -EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency); +EXPORT_SYMBOL_GPL(speedstep_get_frequency); /********************************************************************* * DETECT SPEEDSTEP-CAPABLE PROCESSOR * *********************************************************************/ -unsigned int speedstep_detect_processor (void) +unsigned int speedstep_detect_processor(void) { struct cpuinfo_x86 *c = &cpu_data(0); u32 ebx, msr_lo, msr_hi; @@ -261,7 +281,7 @@ unsigned int speedstep_detect_processor (void) * sample has ebx = 0x0f, production has 0x0e. */ if ((ebx == 0x0e) || (ebx == 0x0f)) - return SPEEDSTEP_PROCESSOR_P4M; + return SPEEDSTEP_CPU_P4M; break; case 7: /* @@ -272,7 +292,7 @@ unsigned int speedstep_detect_processor (void) * samples are only of B-stepping... */ if (ebx == 0x0e) - return SPEEDSTEP_PROCESSOR_P4M; + return SPEEDSTEP_CPU_P4M; break; case 9: /* @@ -288,10 +308,13 @@ unsigned int speedstep_detect_processor (void) * M-P4-Ms may have either ebx=0xe or 0xf [see above] * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] * also, M-P4M HTs have ebx=0x8, too - * For now, they are distinguished by the model_id string + * For now, they are distinguished by the model_id + * string */ - if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) - return SPEEDSTEP_PROCESSOR_P4M; + if ((ebx == 0x0e) || + (strstr(c->x86_model_id, + "Mobile Intel(R) Pentium(R) 4") != NULL)) + return SPEEDSTEP_CPU_P4M; break; default: break; @@ -301,7 +324,8 @@ unsigned int speedstep_detect_processor (void) switch (c->x86_model) { case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, + * 0x06 for mobile PIII-M */ ebx = cpuid_ebx(0x00000001); dprintk("ebx is %x\n", ebx); @@ -313,14 +337,15 @@ unsigned int speedstep_detect_processor (void) /* So far all PIII-M processors support SpeedStep. See * Intel's 24540640.pdf of June 2003 */ - return SPEEDSTEP_PROCESSOR_PIII_T; + return SPEEDSTEP_CPU_PIII_T; case 0x08: /* Intel PIII [Coppermine] */ /* all mobile PIII Coppermines have FSB 100 MHz * ==> sort out a few desktop PIIIs. */ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi); + dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", + msr_lo, msr_hi); msr_lo &= 0x00c0000; if (msr_lo != 0x0080000) return 0; @@ -332,13 +357,15 @@ unsigned int speedstep_detect_processor (void) * bit 56 or 57 is set */ rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi); - if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) { + dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", + msr_lo, msr_hi); + if ((msr_hi & (1<<18)) && + (relaxed_check ? 1 : (msr_hi & (3<<24)))) { if (c->x86_mask == 0x01) { dprintk("early PIII version\n"); - return SPEEDSTEP_PROCESSOR_PIII_C_EARLY; + return SPEEDSTEP_CPU_PIII_C_EARLY; } else - return SPEEDSTEP_PROCESSOR_PIII_C; + return SPEEDSTEP_CPU_PIII_C; } default: @@ -369,7 +396,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, dprintk("trying to determine both speeds\n"); /* get current speed */ - prev_speed = speedstep_get_processor_frequency(processor); + prev_speed = speedstep_get_frequency(processor); if (!prev_speed) return -EIO; @@ -379,7 +406,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, /* switch to low state */ set_state(SPEEDSTEP_LOW); - *low_speed = speedstep_get_processor_frequency(processor); + *low_speed = speedstep_get_frequency(processor); if (!*low_speed) { ret = -EIO; goto out; @@ -398,7 +425,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, if (transition_latency) do_gettimeofday(&tv2); - *high_speed = speedstep_get_processor_frequency(processor); + *high_speed = speedstep_get_frequency(processor); if (!*high_speed) { ret = -EIO; goto out; @@ -426,9 +453,12 @@ unsigned int speedstep_get_freqs(unsigned int processor, /* check if the latency measurement is too high or too low * and set it to a safe value (500uSec) in that case */ - if (*transition_latency > 10000000 || *transition_latency < 50000) { - printk (KERN_WARNING "speedstep: frequency transition measured seems out of " - "range (%u nSec), falling back to a safe one of %u nSec.\n", + if (*transition_latency > 10000000 || + *transition_latency < 50000) { + printk(KERN_WARNING PFX "frequency transition " + "measured seems out of range (%u " + "nSec), falling back to a safe one of" + "%u nSec.\n", *transition_latency, 500000); *transition_latency = 500000; } @@ -436,15 +466,16 @@ unsigned int speedstep_get_freqs(unsigned int processor, out: local_irq_restore(flags); - return (ret); + return ret; } EXPORT_SYMBOL_GPL(speedstep_get_freqs); #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK module_param(relaxed_check, int, 0444); -MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability."); +MODULE_PARM_DESC(relaxed_check, + "Don't do all checks for speedstep capability."); #endif -MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h index b11bcc608cac..2b6c04e5a304 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h @@ -12,17 +12,17 @@ /* processors */ -#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ -#define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */ +#define SPEEDSTEP_CPU_PIII_C_EARLY 0x00000001 /* Coppermine core */ +#define SPEEDSTEP_CPU_PIII_C 0x00000002 /* Coppermine core */ +#define SPEEDSTEP_CPU_PIII_T 0x00000003 /* Tualatin core */ +#define SPEEDSTEP_CPU_P4M 0x00000004 /* P4-M */ /* the following processors are not speedstep-capable and are not auto-detected * in speedstep_detect_processor(). However, their speed can be detected using - * the speedstep_get_processor_frequency() call. */ -#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */ -#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */ -#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */ + * the speedstep_get_frequency() call. */ +#define SPEEDSTEP_CPU_PM 0xFFFFFF03 /* Pentium M */ +#define SPEEDSTEP_CPU_P4D 0xFFFFFF04 /* desktop P4 */ +#define SPEEDSTEP_CPU_PCORE 0xFFFFFF05 /* Core */ /* speedstep states -- only two of them */ @@ -34,7 +34,7 @@ extern unsigned int speedstep_detect_processor (void); /* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_processor_frequency(unsigned int processor); +extern unsigned int speedstep_get_frequency(unsigned int processor); /* detect the low and high speeds of the processor. The callback diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c index 8a85c93bd62a..befea088e4f5 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -19,8 +19,8 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/io.h> #include <asm/ist.h> -#include <asm/io.h> #include "speedstep-lib.h" @@ -30,12 +30,12 @@ * If user gives it, these are used. * */ -static int smi_port = 0; -static int smi_cmd = 0; -static unsigned int smi_sig = 0; +static int smi_port; +static int smi_cmd; +static unsigned int smi_sig; /* info about the processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor; /* * There are only two frequency states for each processor. Values @@ -56,12 +56,13 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { * of DMA activity going on? */ #define SMI_TRIES 5 -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-smi", msg) /** * speedstep_smi_ownership */ -static int speedstep_smi_ownership (void) +static int speedstep_smi_ownership(void) { u32 command, result, magic, dummy; u32 function = GET_SPEEDSTEP_OWNER; @@ -70,16 +71,18 @@ static int speedstep_smi_ownership (void) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); magic = virt_to_phys(magic_data); - dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port); + dprintk("trying to obtain ownership with command %x at port %x\n", + command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp\n" - : "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), - "=S" (dummy) + : "=D" (result), + "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), + "=S" (dummy) : "a" (command), "b" (function), "c" (0), "d" (smi_port), - "D" (0), "S" (magic) + "D" (0), "S" (magic) : "memory" ); @@ -97,10 +100,10 @@ static int speedstep_smi_ownership (void) * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing * shows that the latter occurs if !(ist_info.event & 0xFFFF). */ -static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) +static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high) { u32 command, result = 0, edi, high_mhz, low_mhz, dummy; - u32 state=0; + u32 state = 0; u32 function = GET_SPEEDSTEP_FREQS; if (!(ist_info.event & 0xFFFF)) { @@ -110,17 +113,25 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port); + dprintk("trying to determine frequencies with command %x at port %x\n", + command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp" - : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0) + : "=a" (result), + "=b" (high_mhz), + "=c" (low_mhz), + "=d" (state), "=D" (edi), "=S" (dummy) + : "a" (command), + "b" (function), + "c" (state), + "d" (smi_port), "S" (0), "D" (0) ); - dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz); + dprintk("result %x, low_freq %u, high_freq %u\n", + result, low_mhz, high_mhz); /* abort if results are obviously incorrect... */ if ((high_mhz + low_mhz) < 600) @@ -137,26 +148,30 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) * */ -static int speedstep_get_state (void) +static int speedstep_get_state(void) { - u32 function=GET_SPEEDSTEP_STATE; + u32 function = GET_SPEEDSTEP_STATE; u32 result, state, edi, command, dummy; command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port); + dprintk("trying to determine current setting with command %x " + "at port %x\n", command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp\n" - : "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0) + : "=a" (result), + "=b" (state), "=D" (edi), + "=c" (dummy), "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (0), + "d" (smi_port), "S" (0), "D" (0) ); dprintk("state is %x, result is %x\n", state, result); - return (state & 1); + return state & 1; } @@ -165,11 +180,11 @@ static int speedstep_get_state (void) * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) * */ -static void speedstep_set_state (unsigned int state) +static void speedstep_set_state(unsigned int state) { unsigned int result = 0, command, new_state, dummy; unsigned long flags; - unsigned int function=SET_SPEEDSTEP_STATE; + unsigned int function = SET_SPEEDSTEP_STATE; unsigned int retry = 0; if (state > 0x1) @@ -180,11 +195,14 @@ static void speedstep_set_state (unsigned int state) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port); + dprintk("trying to set frequency to state %u " + "with command %x at port %x\n", + state, command, smi_port); do { if (retry) { - dprintk("retry %u, previous result %u, waiting...\n", retry, result); + dprintk("retry %u, previous result %u, waiting...\n", + retry, result); mdelay(retry * 50); } retry++; @@ -192,20 +210,26 @@ static void speedstep_set_state (unsigned int state) "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp" - : "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy), - "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0) + : "=b" (new_state), "=D" (result), + "=c" (dummy), "=a" (dummy), + "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (state), + "d" (smi_port), "S" (0), "D" (0) ); } while ((new_state != state) && (retry <= SMI_TRIES)); /* enable IRQs */ local_irq_restore(flags); - if (new_state == state) { - dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result); - } else { - printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result); - } + if (new_state == state) + dprintk("change to %u MHz succeeded after %u tries " + "with result %u\n", + (speedstep_freqs[new_state].frequency / 1000), + retry, result); + else + printk(KERN_ERR "cpufreq: change to state %u " + "failed with new_state %u and result %u\n", + state, new_state, result); return; } @@ -219,13 +243,14 @@ static void speedstep_set_state (unsigned int state) * * Sets a new CPUFreq policy/freq. */ -static int speedstep_target (struct cpufreq_policy *policy, +static int speedstep_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate = 0; struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = speedstep_freqs[speedstep_get_state()].frequency; @@ -250,7 +275,7 @@ static int speedstep_target (struct cpufreq_policy *policy, * Limit must be within speedstep_low_freq and speedstep_high_freq, with * at least one border included. */ -static int speedstep_verify (struct cpufreq_policy *policy) +static int speedstep_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); } @@ -259,7 +284,8 @@ static int speedstep_verify (struct cpufreq_policy *policy) static int speedstep_cpu_init(struct cpufreq_policy *policy) { int result; - unsigned int speed,state; + unsigned int speed, state; + unsigned int *low, *high; /* capability check */ if (policy->cpu != 0) @@ -272,19 +298,23 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) } /* detect low and high frequency */ - result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency); + low = &speedstep_freqs[SPEEDSTEP_LOW].frequency; + high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency; + + result = speedstep_smi_get_freqs(low, high); if (result) { - /* fall back to speedstep_lib.c dection mechanism: try both states out */ - dprintk("could not detect low and high frequencies by SMI call.\n"); + /* fall back to speedstep_lib.c dection mechanism: + * try both states out */ + dprintk("could not detect low and high frequencies " + "by SMI call.\n"); result = speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + low, high, NULL, &speedstep_set_state); if (result) { - dprintk("could not detect two different speeds -- aborting.\n"); + dprintk("could not detect two different speeds" + " -- aborting.\n"); return result; } else dprintk("workaround worked.\n"); @@ -295,7 +325,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) speed = speedstep_freqs[state].frequency; dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) + ? "low" : "high", (speed / 1000)); /* cpuinfo and default policy values */ @@ -304,7 +335,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); @@ -321,7 +352,7 @@ static unsigned int speedstep_get(unsigned int cpu) { if (cpu) return -ENODEV; - return speedstep_get_processor_frequency(speedstep_processor); + return speedstep_get_frequency(speedstep_processor); } @@ -335,7 +366,7 @@ static int speedstep_resume(struct cpufreq_policy *policy) return result; } -static struct freq_attr* speedstep_attr[] = { +static struct freq_attr *speedstep_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -364,21 +395,23 @@ static int __init speedstep_init(void) speedstep_processor = speedstep_detect_processor(); switch (speedstep_processor) { - case SPEEDSTEP_PROCESSOR_PIII_T: - case SPEEDSTEP_PROCESSOR_PIII_C: - case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: break; default: speedstep_processor = 0; } if (!speedstep_processor) { - dprintk ("No supported Intel CPU detected.\n"); + dprintk("No supported Intel CPU detected.\n"); return -ENODEV; } - dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", - ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); + dprintk("signature:0x%.8lx, command:0x%.8lx, " + "event:0x%.8lx, perf_level:0x%.8lx.\n", + ist_info.signature, ist_info.command, + ist_info.event, ist_info.perf_level); /* Error if no IST-SMI BIOS or no PARM sig= 'ISGE' aka 'Intel Speedstep Gate E' */ @@ -416,17 +449,20 @@ static void __exit speedstep_exit(void) cpufreq_unregister_driver(&speedstep_driver); } -module_param(smi_port, int, 0444); -module_param(smi_cmd, int, 0444); -module_param(smi_sig, uint, 0444); +module_param(smi_port, int, 0444); +module_param(smi_cmd, int, 0444); +module_param(smi_sig, uint, 0444); -MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2"); -MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82"); -MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface."); +MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value " + "-- Intel's default setting is 0xb2"); +MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value " + "-- Intel's default setting is 0x82"); +MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the " + "SMI interface."); -MODULE_AUTHOR ("Hiroshi Miura"); -MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Hiroshi Miura"); +MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface."); +MODULE_LICENSE("GPL"); module_init(speedstep_init); module_exit(speedstep_exit); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index d5cebb52d45b..b8e7aaf7ef75 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -543,8 +543,6 @@ unsigned long native_calibrate_tsc(void) return tsc_pit_min; } -#ifdef CONFIG_X86_32 -/* Only called from the Powernow K7 cpu freq driver */ int recalibrate_cpu_khz(void) { #ifndef CONFIG_SMP @@ -566,7 +564,6 @@ int recalibrate_cpu_khz(void) EXPORT_SYMBOL(recalibrate_cpu_khz); -#endif /* CONFIG_X86_32 */ /* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) |
