summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c24
-rw-r--r--arch/powerpc/platforms/pseries/eeh_driver.c81
2 files changed, 66 insertions, 39 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index d8d24502970f..b0fa76d0c78a 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -450,11 +450,16 @@ eeh_slot_availability(struct pci_dn *pdn)
if (rc) return rc;
if (rets[1] == 0) return -1; /* EEH is not supported */
- if (rets[0] == 0) return 0; /* Oll Korrect */
+ if (rets[0] == 0) return 0; /* Oll Korrect */
if (rets[0] == 5) {
if (rets[2] == 0) return -1; /* permanently unavailable */
return rets[2]; /* number of millisecs to wait */
}
+ if (rets[0] == 1)
+ return 250;
+
+ printk (KERN_ERR "EEH: Slot unavailable: rc=%d, rets=%d %d %d\n",
+ rc, rets[0], rets[1], rets[2]);
return -1;
}
@@ -501,9 +506,11 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state)
/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
* dn -- device node to be reset.
+ *
+ * Return 0 if success, else a non-zero value.
*/
-void
+int
rtas_set_slot_reset(struct pci_dn *pdn)
{
int i, rc;
@@ -533,10 +540,21 @@ rtas_set_slot_reset(struct pci_dn *pdn)
* ready to be used; if not, wait for recovery. */
for (i=0; i<10; i++) {
rc = eeh_slot_availability (pdn);
- if (rc <= 0) break;
+ if (rc < 0)
+ printk (KERN_ERR "EEH: failed (%d) to reset slot %s\n", rc, pdn->node->full_name);
+ if (rc == 0)
+ return 0;
+ if (rc < 0)
+ return -1;
msleep (rc+100);
}
+
+ rc = eeh_slot_availability (pdn);
+ if (rc)
+ printk (KERN_ERR "EEH: timeout resetting slot %s\n", pdn->node->full_name);
+
+ return rc;
}
/* ------------------------------------------------------- */
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 199a3ce54786..242b2923360d 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -200,14 +200,18 @@ static void eeh_report_failure(struct pci_dev *dev, void *userdata)
* bus resets can be performed.
*/
-static void eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
+static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
{
+ int rc;
if (bus)
pcibios_remove_pci_devices(bus);
/* Reset the pci controller. (Asserts RST#; resets config space).
- * Reconfigure bridges and devices */
- rtas_set_slot_reset(pe_dn);
+ * Reconfigure bridges and devices. Don't try to bring the system
+ * up if the reset failed for some reason. */
+ rc = rtas_set_slot_reset(pe_dn);
+ if (rc)
+ return rc;
/* Walk over all functions on this device */
rtas_configure_bridge(pe_dn);
@@ -223,6 +227,8 @@ static void eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
ssleep (5);
pcibios_add_pci_devices(bus);
}
+
+ return 0;
}
/* The longest amount of time to wait for a pci device
@@ -235,7 +241,7 @@ void handle_eeh_events (struct eeh_event *event)
struct device_node *frozen_dn;
struct pci_dn *frozen_pdn;
struct pci_bus *frozen_bus;
- int perm_failure = 0;
+ int rc = 0;
frozen_dn = find_device_pe(event->dn);
frozen_bus = pcibios_find_pci_bus(frozen_dn);
@@ -272,7 +278,7 @@ void handle_eeh_events (struct eeh_event *event)
frozen_pdn->eeh_freeze_count++;
if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
- perm_failure = 1;
+ goto hard_fail;
/* If the reset state is a '5' and the time to reset is 0 (infinity)
* or is more then 15 seconds, then mark this as a permanent failure.
@@ -280,34 +286,7 @@ void handle_eeh_events (struct eeh_event *event)
if ((event->state == pci_channel_io_perm_failure) &&
((event->time_unavail <= 0) ||
(event->time_unavail > MAX_WAIT_FOR_RECOVERY*1000)))
- {
- perm_failure = 1;
- }
-
- /* Log the error with the rtas logger. */
- if (perm_failure) {
- /*
- * About 90% of all real-life EEH failures in the field
- * are due to poorly seated PCI cards. Only 10% or so are
- * due to actual, failed cards.
- */
- printk(KERN_ERR
- "EEH: PCI device %s - %s has failed %d times \n"
- "and has been permanently disabled. Please try reseating\n"
- "this device or replacing it.\n",
- pci_name (frozen_pdn->pcidev),
- pcid_name(frozen_pdn->pcidev),
- frozen_pdn->eeh_freeze_count);
-
- eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
-
- /* Notify all devices that they're about to go down. */
- pci_walk_bus(frozen_bus, eeh_report_failure, 0);
-
- /* Shut down the device drivers for good. */
- pcibios_remove_pci_devices(frozen_bus);
- return;
- }
+ goto hard_fail;
eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */);
printk(KERN_WARNING
@@ -330,24 +309,54 @@ void handle_eeh_events (struct eeh_event *event)
* go down willingly, without panicing the system.
*/
if (result == PCIERR_RESULT_NONE) {
- eeh_reset_device(frozen_pdn, frozen_bus);
+ rc = eeh_reset_device(frozen_pdn, frozen_bus);
+ if (rc)
+ goto hard_fail;
}
/* If any device called out for a reset, then reset the slot */
if (result == PCIERR_RESULT_NEED_RESET) {
- eeh_reset_device(frozen_pdn, NULL);
+ rc = eeh_reset_device(frozen_pdn, NULL);
+ if (rc)
+ goto hard_fail;
pci_walk_bus(frozen_bus, eeh_report_reset, 0);
}
/* If all devices reported they can proceed, the re-enable PIO */
if (result == PCIERR_RESULT_CAN_RECOVER) {
/* XXX Not supported; we brute-force reset the device */
- eeh_reset_device(frozen_pdn, NULL);
+ rc = eeh_reset_device(frozen_pdn, NULL);
+ if (rc)
+ goto hard_fail;
pci_walk_bus(frozen_bus, eeh_report_reset, 0);
}
/* Tell all device drivers that they can resume operations */
pci_walk_bus(frozen_bus, eeh_report_resume, 0);
+
+ return;
+
+hard_fail:
+ /*
+ * About 90% of all real-life EEH failures in the field
+ * are due to poorly seated PCI cards. Only 10% or so are
+ * due to actual, failed cards.
+ */
+ printk(KERN_ERR
+ "EEH: PCI device %s - %s has failed %d times \n"
+ "and has been permanently disabled. Please try reseating\n"
+ "this device or replacing it.\n",
+ pci_name (frozen_pdn->pcidev),
+ pcid_name(frozen_pdn->pcidev),
+ frozen_pdn->eeh_freeze_count);
+
+ eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
+
+ /* Notify all devices that they're about to go down. */
+ pci_walk_bus(frozen_bus, eeh_report_failure, 0);
+
+ /* Shut down the device drivers for good. */
+ pcibios_remove_pci_devices(frozen_bus);
}
/* ---------- end of file ---------- */
OpenPOWER on IntegriCloud