diff options
Diffstat (limited to 'arch')
28 files changed, 1092 insertions, 956 deletions
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild new file mode 100644 index 000000000000..ad8ec356fb36 --- /dev/null +++ b/arch/x86/Kbuild @@ -0,0 +1,16 @@ + +obj-$(CONFIG_KVM) += kvm/ + +# Xen paravirtualization support +obj-$(CONFIG_XEN) += xen/ + +# lguest paravirtualization support +obj-$(CONFIG_LGUEST_GUEST) += lguest/ + +obj-y += kernel/ +obj-y += mm/ + +obj-y += crypto/ +obj-y += vdso/ +obj-$(CONFIG_IA32_EMULATION) += ia32/ + diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index b1d3f60525c0..aafae3b140de 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -47,6 +47,11 @@ config X86 select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA +config OUTPUT_FORMAT + string + default "elf32-i386" if X86_32 + default "elf64-x86-64" if X86_64 + config ARCH_DEFCONFIG string default "arch/x86/configs/i386_defconfig" if X86_32 @@ -1460,9 +1465,7 @@ config KEXEC_JUMP config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) - default "0x1000000" if X86_NUMAQ - default "0x200000" if X86_64 - default "0x100000" + default "0x1000000" ---help--- This gives the physical address where the kernel is loaded. @@ -1481,15 +1484,15 @@ config PHYSICAL_START to be specifically compiled to run from a specific memory area (normally a reserved region) and this option comes handy. - So if you are using bzImage for capturing the crash dump, leave - the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y. - Otherwise if you plan to use vmlinux for capturing the crash dump - change this value to start of the reserved region (Typically 16MB - 0x1000000). In other words, it can be set based on the "X" value as - specified in the "crashkernel=YM@XM" command line boot parameter - passed to the panic-ed kernel. Typically this parameter is set as - crashkernel=64M@16M. Please take a look at - Documentation/kdump/kdump.txt for more details about crash dumps. + So if you are using bzImage for capturing the crash dump, + leave the value here unchanged to 0x1000000 and set + CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux + for capturing the crash dump change this value to start of + the reserved region. In other words, it can be set based on + the "X" value as specified in the "crashkernel=YM@XM" + command line boot parameter passed to the panic-ed + kernel. Please take a look at Documentation/kdump/kdump.txt + for more details about crash dumps. Usage of bzImage for capturing the crash dump is recommended as one does not have to build two kernels. Same kernel can be used @@ -1502,8 +1505,8 @@ config PHYSICAL_START Don't change this unless you know what you are doing. config RELOCATABLE - bool "Build a relocatable kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Build a relocatable kernel" + default y ---help--- This builds a kernel image that retains relocation information so it can be loaded someplace besides the default 1MB. @@ -1518,12 +1521,16 @@ config RELOCATABLE it has been loaded at and the compile time physical address (CONFIG_PHYSICAL_START) is ignored. +# Relocation on x86-32 needs some additional build support +config X86_NEED_RELOCS + def_bool y + depends on X86_32 && RELOCATABLE + config PHYSICAL_ALIGN hex prompt "Alignment value to which kernel should be aligned" if X86_32 - default "0x100000" if X86_32 - default "0x200000" if X86_64 - range 0x2000 0x400000 + default "0x1000000" + range 0x2000 0x1000000 ---help--- This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 8c86b72afdc2..edbd0ca62067 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -7,8 +7,6 @@ else KBUILD_DEFCONFIG := $(ARCH)_defconfig endif -core-$(CONFIG_KVM) += arch/x86/kvm/ - # BITS is used as extension for files which are available in a 32 bit # and a 64 bit version to simplify shared Makefiles. # e.g.: obj-y += foo_$(BITS).o @@ -118,21 +116,8 @@ head-y += arch/x86/kernel/init_task.o libs-y += arch/x86/lib/ -# Sub architecture files that needs linking first -core-y += $(fcore-y) - -# Xen paravirtualization support -core-$(CONFIG_XEN) += arch/x86/xen/ - -# lguest paravirtualization support -core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/ - -core-y += arch/x86/kernel/ -core-y += arch/x86/mm/ - -core-y += arch/x86/crypto/ -core-y += arch/x86/vdso/ -core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/ +# See arch/x86/Kbuild for content of core part of the kernel +core-y += arch/x86/ # drivers-y are linked after core-y drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore index 172cf8a98bdd..851fe936d242 100644 --- a/arch/x86/boot/.gitignore +++ b/arch/x86/boot/.gitignore @@ -3,6 +3,8 @@ bzImage cpustr.h mkcpustr offsets.h +voffset.h +zoffset.h setup setup.bin setup.elf diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 6633b6e7505a..619d297aa2ba 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -86,19 +86,27 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE SETUP_OBJS = $(addprefix $(obj)/,$(setup-y)) -sed-offsets := -e 's/^00*/0/' \ - -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p' +sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p' -quiet_cmd_offsets = OFFSETS $@ - cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@ +quiet_cmd_voffset = VOFFSET $@ + cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@ -$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE - $(call if_changed,offsets) +targets += voffset.h +$(obj)/voffset.h: vmlinux FORCE + $(call if_changed,voffset) + +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' + +quiet_cmd_zoffset = ZOFFSET $@ + cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ + +targets += zoffset.h +$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE + $(call if_changed,zoffset) -targets += offsets.h AFLAGS_header.o += -I$(obj) -$(obj)/header.o: $(obj)/offsets.h +$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h LDFLAGS_setup.elf := -T $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore index 63eff3b04d01..4a46fab7162e 100644 --- a/arch/x86/boot/compressed/.gitignore +++ b/arch/x86/boot/compressed/.gitignore @@ -1,3 +1,6 @@ relocs vmlinux.bin.all vmlinux.relocs +vmlinux.lds +mkpiggy +piggy.S diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 65551c9f8571..49c8a4c37d7c 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -19,7 +19,9 @@ KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ LDFLAGS := -m elf_$(UTS_MACHINE) LDFLAGS_vmlinux := -T -$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE +hostprogs-y := mkpiggy + +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE $(call if_changed,ld) @: @@ -29,7 +31,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE targets += vmlinux.bin.all vmlinux.relocs relocs -hostprogs-$(CONFIG_X86_32) += relocs +hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs quiet_cmd_relocs = RELOCS $@ cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $< @@ -37,46 +39,22 @@ $(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE $(call if_changed,relocs) vmlinux.bin.all-y := $(obj)/vmlinux.bin -vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs -quiet_cmd_relocbin = BUILD $@ - cmd_relocbin = cat $(filter-out FORCE,$^) > $@ -$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE - $(call if_changed,relocbin) - -ifeq ($(CONFIG_X86_32),y) +vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs -ifdef CONFIG_RELOCATABLE -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,lzma) -else -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzma) -endif -LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T -else +suffix-$(CONFIG_KERNEL_GZIP) := gz +suffix-$(CONFIG_KERNEL_BZIP2) := bz2 +suffix-$(CONFIG_KERNEL_LZMA) := lzma -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE - $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE - $(call if_changed,lzma) - -LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T -endif +quiet_cmd_mkpiggy = MKPIGGY $@ + cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false ) -suffix_$(CONFIG_KERNEL_GZIP) = gz -suffix_$(CONFIG_KERNEL_BZIP2) = bz2 -suffix_$(CONFIG_KERNEL_LZMA) = lzma - -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE - $(call if_changed,ld) +targets += piggy.S +$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE + $(call if_changed,mkpiggy) diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index 3a8a866fb2e2..75e4f001e706 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -12,16 +12,16 @@ * the page directory. [According to comments etc elsewhere on a compressed * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] * - * Page 0 is deliberately kept safe, since System Management Mode code in + * Page 0 is deliberately kept safe, since System Management Mode code in * laptops may need to access the BIOS data stored there. This is also - * useful for future device drivers that either access the BIOS via VM86 + * useful for future device drivers that either access the BIOS via VM86 * mode. */ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -.text + .text #include <linux/linkage.h> #include <asm/segment.h> @@ -29,161 +29,151 @@ #include <asm/boot.h> #include <asm/asm-offsets.h> -.section ".text.head","ax",@progbits + .section ".text.head","ax",@progbits ENTRY(startup_32) cld - /* test KEEP_SEGMENTS flag to see if the bootloader is asking - * us to not reload segments */ - testb $(1<<6), BP_loadflags(%esi) - jnz 1f + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ + testb $(1<<6), BP_loadflags(%esi) + jnz 1f cli - movl $(__BOOT_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - movl %eax,%ss + movl $__BOOT_DS, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss 1: -/* Calculate the delta between where we were compiled to run +/* + * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ - leal (0x1e4+4)(%esi), %esp - call 1f -1: popl %ebp - subl $1b, %ebp + leal (BP_scratch+4)(%esi), %esp + call 1f +1: popl %ebp + subl $1b, %ebp -/* %ebp contains the address we are loaded at by the boot loader and %ebx +/* + * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE - movl %ebp, %ebx - addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx - andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx + movl %ebp, %ebx + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx #else - movl $LOAD_PHYSICAL_ADDR, %ebx + movl $LOAD_PHYSICAL_ADDR, %ebx #endif - /* Replace the compressed data size with the uncompressed size */ - subl input_len(%ebp), %ebx - movl output_len(%ebp), %eax - addl %eax, %ebx - /* Add 8 bytes for every 32K input block */ - shrl $12, %eax - addl %eax, %ebx - /* Add 32K + 18 bytes of extra slack */ - addl $(32768 + 18), %ebx - /* Align on a 4K boundary */ - addl $4095, %ebx - andl $~4095, %ebx - -/* Copy the compressed kernel to the end of our buffer + /* Target address to relocate to for decompression */ + addl $z_extract_offset, %ebx + + /* Set up the stack */ + leal boot_stack_end(%ebx), %esp + + /* Zero EFLAGS */ + pushl $0 + popfl + +/* + * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ - pushl %esi - leal _end(%ebp), %esi - leal _end(%ebx), %edi - movl $(_end - startup_32), %ecx + pushl %esi + leal (_bss-4)(%ebp), %esi + leal (_bss-4)(%ebx), %edi + movl $(_bss - startup_32), %ecx + shrl $2, %ecx std - rep - movsb + rep movsl cld - popl %esi - -/* Compute the kernel start address. - */ -#ifdef CONFIG_RELOCATABLE - addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp - andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp -#else - movl $LOAD_PHYSICAL_ADDR, %ebp -#endif + popl %esi /* * Jump to the relocated address. */ - leal relocated(%ebx), %eax - jmp *%eax + leal relocated(%ebx), %eax + jmp *%eax ENDPROC(startup_32) -.section ".text" + .text relocated: /* - * Clear BSS - */ - xorl %eax,%eax - leal _edata(%ebx),%edi - leal _end(%ebx), %ecx - subl %edi,%ecx - cld - rep - stosb - -/* - * Setup the stack for the decompressor + * Clear BSS (stack is currently empty) */ - leal boot_stack_end(%ebx), %esp + xorl %eax, %eax + leal _bss(%ebx), %edi + leal _ebss(%ebx), %ecx + subl %edi, %ecx + shrl $2, %ecx + rep stosl /* * Do the decompression, and jump to the new kernel.. */ - movl output_len(%ebx), %eax - pushl %eax - # push arguments for decompress_kernel: - pushl %ebp # output address - movl input_len(%ebx), %eax - pushl %eax # input_len - leal input_data(%ebx), %eax - pushl %eax # input_data - leal boot_heap(%ebx), %eax - pushl %eax # heap area - pushl %esi # real mode pointer - call decompress_kernel - addl $20, %esp - popl %ecx + leal z_extract_offset_negative(%ebx), %ebp + /* push arguments for decompress_kernel: */ + pushl %ebp /* output address */ + pushl $z_input_len /* input_len */ + leal input_data(%ebx), %eax + pushl %eax /* input_data */ + leal boot_heap(%ebx), %eax + pushl %eax /* heap area */ + pushl %esi /* real mode pointer */ + call decompress_kernel + addl $20, %esp #if CONFIG_RELOCATABLE -/* Find the address of the relocations. +/* + * Find the address of the relocations. */ - movl %ebp, %edi - addl %ecx, %edi + leal z_output_len(%ebp), %edi -/* Calculate the delta between where vmlinux was compiled to run +/* + * Calculate the delta between where vmlinux was compiled to run * and where it was actually loaded. */ - movl %ebp, %ebx - subl $LOAD_PHYSICAL_ADDR, %ebx - jz 2f /* Nothing to be done if loaded at compiled addr. */ + movl %ebp, %ebx + subl $LOAD_PHYSICAL_ADDR, %ebx + jz 2f /* Nothing to be done if loaded at compiled addr. */ /* * Process relocations. */ -1: subl $4, %edi - movl 0(%edi), %ecx - testl %ecx, %ecx - jz 2f - addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) - jmp 1b +1: subl $4, %edi + movl (%edi), %ecx + testl %ecx, %ecx + jz 2f + addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) + jmp 1b 2: #endif /* * Jump to the decompressed kernel. */ - xorl %ebx,%ebx - jmp *%ebp + xorl %ebx, %ebx + jmp *%ebp -.bss -/* Stack and heap for uncompression */ -.balign 4 +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 boot_heap: .fill BOOT_HEAP_SIZE, 1, 0 boot_stack: diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index ed4a82948002..f62c284db9eb 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -21,8 +21,8 @@ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -.code32 -.text + .code32 + .text #include <linux/linkage.h> #include <asm/segment.h> @@ -33,12 +33,14 @@ #include <asm/processor-flags.h> #include <asm/asm-offsets.h> -.section ".text.head" + .section ".text.head" .code32 ENTRY(startup_32) cld - /* test KEEP_SEGMENTS flag to see if the bootloader is asking - * us to not reload segments */ + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ testb $(1<<6), BP_loadflags(%esi) jnz 1f @@ -49,14 +51,15 @@ ENTRY(startup_32) movl %eax, %ss 1: -/* Calculate the delta between where we were compiled to run +/* + * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ - leal (0x1e4+4)(%esi), %esp + leal (BP_scratch+4)(%esi), %esp call 1f 1: popl %ebp subl $1b, %ebp @@ -70,32 +73,28 @@ ENTRY(startup_32) testl %eax, %eax jnz no_longmode -/* Compute the delta between where we were compiled to run at +/* + * Compute the delta between where we were compiled to run at * and where the code will actually run at. - */ -/* %ebp contains the address we are loaded at by the boot loader and %ebx + * + * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE movl %ebp, %ebx - addl $(PMD_PAGE_SIZE -1), %ebx - andl $PMD_PAGE_MASK, %ebx + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx #else - movl $CONFIG_PHYSICAL_START, %ebx + movl $LOAD_PHYSICAL_ADDR, %ebx #endif - /* Replace the compressed data size with the uncompressed size */ - subl input_len(%ebp), %ebx - movl output_len(%ebp), %eax - addl %eax, %ebx - /* Add 8 bytes for every 32K input block */ - shrl $12, %eax - addl %eax, %ebx - /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ - addl $(32768 + 18 + 4095), %ebx - andl $~4095, %ebx + /* Target address to relocate to for decompression */ + addl $z_extract_offset, %ebx /* * Prepare for entering 64 bit mode @@ -114,7 +113,7 @@ ENTRY(startup_32) /* * Build early 4G boot pagetable */ - /* Initialize Page tables to 0*/ + /* Initialize Page tables to 0 */ leal pgtable(%ebx), %edi xorl %eax, %eax movl $((4096*6)/4), %ecx @@ -155,7 +154,8 @@ ENTRY(startup_32) btsl $_EFER_LME, %eax wrmsr - /* Setup for the jump to 64bit mode + /* + * Setup for the jump to 64bit mode * * When the jump is performend we will be in long mode but * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 @@ -184,7 +184,8 @@ no_longmode: #include "../../kernel/verify_cpu_64.S" - /* Be careful here startup_64 needs to be at a predictable + /* + * Be careful here startup_64 needs to be at a predictable * address so I can export it in an ELF header. Bootloaders * should look at the ELF header to find this address, as * it may change in the future. @@ -192,7 +193,8 @@ no_longmode: .code64 .org 0x200 ENTRY(startup_64) - /* We come here either from startup_32 or directly from a + /* + * We come here either from startup_32 or directly from a * 64bit bootloader. If we come here from a bootloader we depend on * an identity mapped page table being provied that maps our * entire text+data+bss and hopefully all of memory. @@ -209,50 +211,54 @@ ENTRY(startup_64) movl $0x20, %eax ltr %ax - /* Compute the decompressed kernel start address. It is where + /* + * Compute the decompressed kernel start address. It is where * we were loaded at aligned to a 2M boundary. %rbp contains the * decompressed kernel start address. * * If it is a relocatable kernel then decompress and run the kernel * from load address aligned to 2MB addr, otherwise decompress and - * run the kernel from CONFIG_PHYSICAL_START + * run the kernel from LOAD_PHYSICAL_ADDR + * + * We cannot rely on the calculation done in 32-bit mode, since we + * may have been invoked via the 64-bit entry point. */ /* Start with the delta to where the kernel will run at. */ #ifdef CONFIG_RELOCATABLE leaq startup_32(%rip) /* - $startup_32 */, %rbp - addq $(PMD_PAGE_SIZE - 1), %rbp - andq $PMD_PAGE_MASK, %rbp - movq %rbp, %rbx + movl BP_kernel_alignment(%rsi), %eax + decl %eax + addq %rax, %rbp + notq %rax + andq %rax, %rbp #else - movq $CONFIG_PHYSICAL_START, %rbp - movq %rbp, %rbx + movq $LOAD_PHYSICAL_ADDR, %rbp #endif - /* Replace the compressed data size with the uncompressed size */ - movl input_len(%rip), %eax - subq %rax, %rbx - movl output_len(%rip), %eax - addq %rax, %rbx - /* Add 8 bytes for every 32K input block */ - shrq $12, %rax - addq %rax, %rbx - /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ - addq $(32768 + 18 + 4095), %rbx - andq $~4095, %rbx - -/* Copy the compressed kernel to the end of our buffer + /* Target address to relocate to for decompression */ + leaq z_extract_offset(%rbp), %rbx + + /* Set up the stack */ + leaq boot_stack_end(%rbx), %rsp + + /* Zero EFLAGS */ + pushq $0 + popfq + +/* + * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ - leaq _end_before_pgt(%rip), %r8 - leaq _end_before_pgt(%rbx), %r9 - movq $_end_before_pgt /* - $startup_32 */, %rcx -1: subq $8, %r8 - subq $8, %r9 - movq 0(%r8), %rax - movq %rax, 0(%r9) - subq $8, %rcx - jnz 1b + pushq %rsi + leaq (_bss-8)(%rip), %rsi + leaq (_bss-8)(%rbx), %rdi + movq $_bss /* - $startup_32 */, %rcx + shrq $3, %rcx + std + rep movsq + cld + popq %rsi /* * Jump to the relocated address. @@ -260,37 +266,28 @@ ENTRY(startup_64) leaq relocated(%rbx), %rax jmp *%rax -.section ".text" + .text relocated: /* - * Clear BSS + * Clear BSS (stack is currently empty) */ - xorq %rax, %rax - leaq _edata(%rbx), %rdi - leaq _end_before_pgt(%rbx), %rcx + xorl %eax, %eax + leaq _bss(%rip), %rdi + leaq _ebss(%rip), %rcx subq %rdi, %rcx - cld - rep - stosb - - /* Setup the stack */ - leaq boot_stack_end(%rip), %rsp - - /* zero EFLAGS after setting rsp */ - pushq $0 - popfq + shrq $3, %rcx + rep stosq /* * Do the decompression, and jump to the new kernel.. */ - pushq %rsi # Save the real mode argument - movq %rsi, %rdi # real mode address - leaq boot_heap(%rip), %rsi # malloc area for uncompression - leaq input_data(%rip), %rdx # input_data - movl input_len(%rip), %eax - movq %rax, %rcx # input_len - movq %rbp, %r8 # output + pushq %rsi /* Save the real mode argument */ + movq %rsi, %rdi /* real mode address */ + leaq boot_heap(%rip), %rsi /* malloc area for uncompression */ + leaq input_data(%rip), %rdx /* input_data */ + movl $z_input_len, %ecx /* input_len */ + movq %rbp, %r8 /* output target address */ call decompress_kernel popq %rsi @@ -311,11 +308,21 @@ gdt: .quad 0x0000000000000000 /* TS continued */ gdt_end: -.bss -/* Stack and heap for uncompression */ -.balign 4 +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 boot_heap: .fill BOOT_HEAP_SIZE, 1, 0 boot_stack: .fill BOOT_STACK_SIZE, 1, 0 boot_stack_end: + +/* + * Space for page tables (not in .bss so not zeroed) + */ + .section ".pgtable","a",@nobits + .balign 4096 +pgtable: + .fill 6*4096, 1, 0 diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index e45be73684ff..842b2a36174a 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -325,21 +325,19 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, free_mem_ptr = heap; /* Heap */ free_mem_end_ptr = heap + BOOT_HEAP_SIZE; + if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1)) + error("Destination address inappropriately aligned"); #ifdef CONFIG_X86_64 - if ((unsigned long)output & (__KERNEL_ALIGN - 1)) - error("Destination address not 2M aligned"); - if ((unsigned long)output >= 0xffffffffffUL) + if (heap > 0x3fffffffffffUL) error("Destination address too large"); #else - if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1)) - error("Destination address not CONFIG_PHYSICAL_ALIGN aligned"); if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff)) error("Destination address too large"); +#endif #ifndef CONFIG_RELOCATABLE - if ((u32)output != LOAD_PHYSICAL_ADDR) + if ((unsigned long)output != LOAD_PHYSICAL_ADDR) error("Wrong destination address"); #endif -#endif if (!quiet) putstr("\nDecompressing Linux... "); diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c new file mode 100644 index 000000000000..bcbd36c41432 --- /dev/null +++ b/arch/x86/boot/compressed/mkpiggy.c @@ -0,0 +1,97 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright (C) 2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * H. Peter Anvin <hpa@linux.intel.com> + * + * ----------------------------------------------------------------------- */ + +/* + * Compute the desired load offset from a compressed program; outputs + * a small assembly wrapper with the appropriate symbols defined. + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <inttypes.h> + +static uint32_t getle32(const void *p) +{ + const uint8_t *cp = p; + + return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) + + ((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24); +} + +int main(int argc, char *argv[]) +{ + uint32_t olen; + long ilen; + unsigned long offs; + FILE *f; + + if (argc < 2) { + fprintf(stderr, "Usage: %s compressed_file\n", argv[0]); + return 1; + } + + /* Get the information for the compressed kernel image first */ + + f = fopen(argv[1], "r"); + if (!f) { + perror(argv[1]); + return 1; + } + + + if (fseek(f, -4L, SEEK_END)) { + perror(argv[1]); + } + fread(&olen, sizeof olen, 1, f); + ilen = ftell(f); + olen = getle32(&olen); + fclose(f); + + /* + * Now we have the input (compressed) and output (uncompressed) + * sizes, compute the necessary decompression offset... + */ + + offs = (olen > ilen) ? olen - ilen : 0; + offs += olen >> 12; /* Add 8 bytes for each 32K block */ + offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */ + offs = (offs+4095) & ~4095; /* Round to a 4K boundary */ + + printf(".section \".rodata.compressed\",\"a\",@progbits\n"); + printf(".globl z_input_len\n"); + printf("z_input_len = %lu\n", ilen); + printf(".globl z_output_len\n"); + printf("z_output_len = %lu\n", (unsigned long)olen); + printf(".globl z_extract_offset\n"); + printf("z_extract_offset = 0x%lx\n", offs); + /* z_extract_offset_negative allows simplification of head_32.S */ + printf(".globl z_extract_offset_negative\n"); + printf("z_extract_offset_negative = -0x%lx\n", offs); + + printf(".globl input_data, input_data_end\n"); + printf("input_data:\n"); + printf(".incbin \"%s\"\n", argv[1]); + printf("input_data_end:\n"); + + return 0; +} diff --git a/arch/x86/boot/compressed/vmlinux_64.lds b/arch/x86/boot/compressed/vmlinux.lds.S index bef1ac891bce..cc353e1b3ffd 100644 --- a/arch/x86/boot/compressed/vmlinux_64.lds +++ b/arch/x86/boot/compressed/vmlinux.lds.S @@ -1,6 +1,17 @@ -OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") +OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT) + +#undef i386 + +#include <asm/page_types.h> + +#ifdef CONFIG_X86_64 OUTPUT_ARCH(i386:x86-64) ENTRY(startup_64) +#else +OUTPUT_ARCH(i386) +ENTRY(startup_32) +#endif + SECTIONS { /* Be careful parts of head_64.S assume startup_32 is at @@ -33,16 +44,22 @@ SECTIONS *(.data.*) _edata = . ; } + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); .bss : { _bss = . ; *(.bss) *(.bss.*) *(COMMON) - . = ALIGN(8); - _end_before_pgt = . ; - . = ALIGN(4096); - pgtable = . ; - . = . + 4096 * 6; + . = ALIGN(8); /* For convenience during zeroing */ _ebss = .; } +#ifdef CONFIG_X86_64 + . = ALIGN(PAGE_SIZE); + .pgtable : { + _pgtable = . ; + *(.pgtable) + _epgtable = . ; + } +#endif + _end = .; } diff --git a/arch/x86/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux.scr deleted file mode 100644 index f02382ae5c48..000000000000 --- a/arch/x86/boot/compressed/vmlinux.scr +++ /dev/null @@ -1,10 +0,0 @@ -SECTIONS -{ - .rodata.compressed : { - input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - output_len = . - 4; - input_data_end = .; - } -} diff --git a/arch/x86/boot/compressed/vmlinux_32.lds b/arch/x86/boot/compressed/vmlinux_32.lds deleted file mode 100644 index bb3c48379c40..000000000000 --- a/arch/x86/boot/compressed/vmlinux_32.lds +++ /dev/null @@ -1,43 +0,0 @@ -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(startup_32) -SECTIONS -{ - /* Be careful parts of head_32.S assume startup_32 is at - * address 0. - */ - . = 0; - .text.head : { - _head = . ; - *(.text.head) - _ehead = . ; - } - .rodata.compressed : { - *(.rodata.compressed) - } - .text : { - _text = .; /* Text */ - *(.text) - *(.text.*) - _etext = . ; - } - .rodata : { - _rodata = . ; - *(.rodata) /* read-only data */ - *(.rodata.*) - _erodata = . ; - } - .data : { - _data = . ; - *(.data) - *(.data.*) - _edata = . ; - } - .bss : { - _bss = . ; - *(.bss) - *(.bss.*) - *(COMMON) - _end = . ; - } -} diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 5d84d1c74e4c..1040f6e8010c 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -22,7 +22,8 @@ #include <asm/page_types.h> #include <asm/setup.h> #include "boot.h" -#include "offsets.h" +#include "voffset.h" +#include "zoffset.h" BOOTSEG = 0x07C0 /* original address of boot-sector */ SYSSEG = 0x1000 /* historical load address >> 4 */ @@ -115,7 +116,7 @@ _start: # Part 2 of the header, from the old setup.S .ascii "HdrS" # header signature - .word 0x0209 # header version number (>= 0x0105) + .word 0x020a # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) .globl realmode_swtch realmode_swtch: .word 0, 0 # default_switch, SETUPSEG @@ -168,7 +169,11 @@ heap_end_ptr: .word _end+STACK_SIZE-512 # end of setup code can be used by setup # for local heap purposes. -pad1: .word 0 +ext_loader_ver: + .byte 0 # Extended boot loader version +ext_loader_type: + .byte 0 # Extended boot loader type + cmd_line_ptr: .long 0 # (Header version 0x0202 or later) # If nonzero, a 32-bit pointer # to the kernel command line. @@ -200,7 +205,7 @@ relocatable_kernel: .byte 1 #else relocatable_kernel: .byte 0 #endif -pad2: .byte 0 +min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment pad3: .word 0 cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, @@ -212,13 +217,24 @@ hardware_subarch: .long 0 # subarchitecture, added with 2.07 hardware_subarch_data: .quad 0 -payload_offset: .long input_data -payload_length: .long input_data_end-input_data +payload_offset: .long ZO_input_data +payload_length: .long ZO_z_input_len setup_data: .quad 0 # 64-bit physical pointer to # single linked list of # struct setup_data +pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr + +#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset) +#define VO_INIT_SIZE (VO__end - VO__text) +#if ZO_INIT_SIZE > VO_INIT_SIZE +#define INIT_SIZE ZO_INIT_SIZE +#else +#define INIT_SIZE VO_INIT_SIZE +#endif +init_size: .long INIT_SIZE # kernel initialization size + # End of setup header ##################################################### .section ".inittext", "ax" diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 235b81d0f6f2..edb992ebef92 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Tue Feb 24 15:50:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Mon May 11 16:21:55 2009 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y +CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -33,6 +34,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -40,15 +42,16 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y +CONFIG_X86_32_LAZY_GS=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -60,10 +63,17 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y @@ -113,23 +123,26 @@ CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -139,6 +152,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -154,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -167,7 +183,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -194,12 +209,12 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SPARSE_IRQ=y -CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y +# CONFIG_X86_BIGSMP is not set +CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_ELAN is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_VSMP is not set # CONFIG_X86_RDC321X is not set +# CONFIG_X86_32_NON_STANDARD is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_MEMTEST is not set @@ -230,8 +245,10 @@ CONFIG_M686=y # CONFIG_GENERIC_CPU is not set CONFIG_X86_GENERIC=y CONFIG_X86_CPU=y +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=y # CONFIG_X86_PPRO_FENCE is not set CONFIG_X86_WP_WORKS_OK=y @@ -247,7 +264,7 @@ CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR_32=y +CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y CONFIG_X86_DS=y @@ -279,6 +296,7 @@ CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y +# CONFIG_X86_CPU_DEBUG is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set @@ -302,6 +320,8 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_HIGHPTE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y @@ -312,6 +332,7 @@ CONFIG_MTRR=y CONFIG_X86_PAT=y CONFIG_EFI=y CONFIG_SECCOMP=y +# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set @@ -322,8 +343,9 @@ CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y # CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_RELOCATABLE=y +CONFIG_X86_NEED_RELOCS=y +CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set @@ -363,7 +385,6 @@ CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set -CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set @@ -425,6 +446,7 @@ CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y +# CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y # CONFIG_HOTPLUG_PCI_PCIE is not set CONFIG_PCIEAER=y @@ -435,6 +457,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y +# CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set @@ -481,7 +504,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -639,6 +661,7 @@ CONFIG_LLC=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -696,6 +719,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set CONFIG_HAMRADIO=y # @@ -706,12 +730,10 @@ CONFIG_HAMRADIO=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -789,6 +811,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -842,6 +865,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -940,6 +964,7 @@ CONFIG_DM_ZERO=y CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -977,6 +1002,8 @@ CONFIG_MII=y CONFIG_NET_VENDOR_3COM=y # CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set @@ -1026,6 +1053,7 @@ CONFIG_E1000=y CONFIG_E1000E=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -1040,6 +1068,7 @@ CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -1049,6 +1078,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -1058,6 +1088,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set CONFIG_TR=y # CONFIG_IBMOL is not set # CONFIG_IBMLS is not set @@ -1073,8 +1104,8 @@ CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_PRISM54 is not set @@ -1084,21 +1115,21 @@ CONFIG_WLAN_80211=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set CONFIG_ATH5K=y # CONFIG_ATH5K_DEBUG is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1209,6 +1240,8 @@ CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_WACOM is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -1303,6 +1336,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y CONFIG_HW_RANDOM_GEODE=y @@ -1390,7 +1424,6 @@ CONFIG_I2C_I801=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1424,6 +1457,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATK0110 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1433,6 +1467,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set @@ -1448,11 +1483,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1643,7 +1681,6 @@ CONFIG_FB_EFI=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set @@ -1652,6 +1689,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y @@ -1738,6 +1776,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1811,15 +1851,17 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1885,11 +1927,11 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1931,7 +1973,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1947,6 +1988,7 @@ CONFIG_USB_LIBUSUAL=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1958,8 +2000,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_ALIX2 is not set # CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1969,6 +2013,10 @@ CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y @@ -2037,6 +2085,7 @@ CONFIG_DMADEVICES=y # DMA Devices # # CONFIG_INTEL_IOATDMA is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y @@ -2071,6 +2120,7 @@ CONFIG_DMIID=y # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -2101,6 +2151,11 @@ CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -2151,6 +2206,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -2164,7 +2220,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -2251,6 +2306,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -2266,6 +2322,7 @@ CONFIG_TIMER_STATS=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y @@ -2289,13 +2346,19 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y +CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -2305,13 +2368,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_POWER_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_HW_BRANCH_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -2321,7 +2392,6 @@ CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y @@ -2329,7 +2399,7 @@ CONFIG_DEBUG_RODATA=y CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=y -# CONFIG_MMIOTRACE is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2365,6 +2435,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_IMA is not set CONFIG_CRYPTO=y # @@ -2380,10 +2452,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -2456,6 +2530,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -2467,11 +2542,13 @@ CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_GEODE is not set # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_LGUEST is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -2489,7 +2566,10 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 27b8ce0f5908..cee1dd2e69b2 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Tue Feb 24 15:44:16 2009 +# Linux kernel version: 2.6.30-rc2 +# Mon May 11 16:22:00 2009 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -34,6 +35,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -41,14 +43,14 @@ CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -61,10 +63,17 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y @@ -114,23 +123,26 @@ CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -140,6 +152,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -155,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -167,7 +182,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -195,11 +209,10 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SPARSE_IRQ=y -CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_GENERICARCH is not set +CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_VSMP is not set +# CONFIG_X86_UV is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_MEMTEST is not set @@ -229,10 +242,10 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y @@ -241,7 +254,7 @@ CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR_64=y +CONFIG_CPU_SUP_CENTAUR=y CONFIG_X86_DS=y CONFIG_X86_PTRACE_BTS=y CONFIG_HPET_TIMER=y @@ -268,6 +281,7 @@ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y @@ -275,6 +289,7 @@ CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y +# CONFIG_X86_CPU_DEBUG is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y CONFIG_NUMA=y @@ -308,6 +323,8 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW_64K=y @@ -316,6 +333,7 @@ CONFIG_MTRR=y CONFIG_X86_PAT=y CONFIG_EFI=y CONFIG_SECCOMP=y +# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set @@ -324,9 +342,10 @@ CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y +# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set @@ -369,7 +388,6 @@ CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set -CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set @@ -435,6 +453,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y +# CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=y @@ -480,7 +499,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -638,6 +656,7 @@ CONFIG_LLC=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -695,6 +714,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set CONFIG_HAMRADIO=y # @@ -705,12 +725,10 @@ CONFIG_HAMRADIO=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -787,9 +805,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_SGI_XP is not set # CONFIG_HP_ILO is not set -# CONFIG_SGI_GRU is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -843,6 +860,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -939,6 +957,7 @@ CONFIG_DM_ZERO=y CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -976,6 +995,8 @@ CONFIG_MII=y CONFIG_NET_VENDOR_3COM=y # CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set @@ -1025,6 +1046,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -1039,6 +1061,7 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -1048,6 +1071,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -1057,6 +1081,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set CONFIG_TR=y # CONFIG_IBMOL is not set # CONFIG_3C359 is not set @@ -1071,8 +1096,8 @@ CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_PRISM54 is not set @@ -1082,21 +1107,21 @@ CONFIG_WLAN_80211=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set CONFIG_ATH5K=y # CONFIG_ATH5K_DEBUG is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1207,6 +1232,8 @@ CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_WACOM is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -1300,6 +1327,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set CONFIG_NVRAM=y @@ -1381,7 +1409,6 @@ CONFIG_I2C_I801=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1415,6 +1442,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATK0110 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1424,6 +1452,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set @@ -1439,11 +1468,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1634,6 +1666,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y @@ -1719,6 +1752,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1791,15 +1826,17 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1865,11 +1902,11 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1911,7 +1948,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1927,6 +1963,7 @@ CONFIG_USB_LIBUSUAL=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1938,8 +1975,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_ALIX2 is not set # CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1949,6 +1988,10 @@ CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y @@ -2017,6 +2060,7 @@ CONFIG_DMADEVICES=y # DMA Devices # # CONFIG_INTEL_IOATDMA is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y @@ -2050,6 +2094,7 @@ CONFIG_DMIID=y # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -2081,6 +2126,11 @@ CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -2131,6 +2181,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -2144,7 +2195,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -2231,6 +2281,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -2246,6 +2297,7 @@ CONFIG_TIMER_STATS=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -2268,13 +2320,19 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y +CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -2284,13 +2342,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_POWER_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_HW_BRANCH_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -2300,14 +2366,13 @@ CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_DEBUG_NX_TEST=m # CONFIG_IOMMU_DEBUG is not set -# CONFIG_MMIOTRACE is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2343,6 +2408,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_IMA is not set CONFIG_CRYPTO=y # @@ -2358,10 +2425,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -2413,6 +2482,7 @@ CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_AES_NI_INTEL is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set @@ -2434,6 +2504,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -2443,10 +2514,12 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -2463,7 +2536,10 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h index 6ba23dd9fc92..418e632d4a80 100644 --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -8,11 +8,26 @@ #ifdef __KERNEL__ +#include <asm/page_types.h> + /* Physical address where kernel should be loaded. */ #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \ + (CONFIG_PHYSICAL_ALIGN - 1)) \ & ~(CONFIG_PHYSICAL_ALIGN - 1)) +/* Minimum kernel alignment, as a power of two */ +#ifdef CONFIG_x86_64 +#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT +#else +#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1) +#endif +#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2) + +#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \ + (CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)) +#error "Invalid value for CONFIG_PHYSICAL_ALIGN" +#endif + #ifdef CONFIG_KERNEL_BZIP2 #define BOOT_HEAP_SIZE 0x400000 #else /* !CONFIG_KERNEL_BZIP2 */ diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 433adaebf9b6..1724e8de317c 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -50,7 +50,8 @@ struct setup_header { __u32 ramdisk_size; __u32 bootsect_kludge; __u16 heap_end_ptr; - __u16 _pad1; + __u8 ext_loader_ver; + __u8 ext_loader_type; __u32 cmd_line_ptr; __u32 initrd_addr_max; __u32 kernel_alignment; diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h index d38c91b70248..e11900f2500e 100644 --- a/arch/x86/include/asm/page_64_types.h +++ b/arch/x86/include/asm/page_64_types.h @@ -32,17 +32,9 @@ */ #define __PAGE_OFFSET _AC(0xffff880000000000, UL) -#define __PHYSICAL_START CONFIG_PHYSICAL_START -#define __KERNEL_ALIGN 0x200000 - -/* - * Make sure kernel is aligned to 2MB address. Catching it at compile - * time is better. Change your config file and compile the kernel - * for a 2MB aligned address (CONFIG_PHYSICAL_START) - */ -#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0 -#error "CONFIG_PHYSICAL_START must be a multiple of 2MB" -#endif +#define __PHYSICAL_START ((CONFIG_PHYSICAL_START + \ + (CONFIG_PHYSICAL_ALIGN - 1)) & \ + ~(CONFIG_PHYSICAL_ALIGN - 1)) #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START) #define __START_KERNEL_map _AC(0xffffffff80000000, UL) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index fed93fec9764..6469866a7410 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -815,6 +815,7 @@ extern unsigned int BIOS_revision; /* Boot loader type from the setup header: */ extern int bootloader_type; +extern int bootloader_version; extern char ignore_fpu_irq; diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c index 5a6aa1c1162f..1a830cbd7015 100644 --- a/arch/x86/kernel/asm-offsets_32.c +++ b/arch/x86/kernel/asm-offsets_32.c @@ -146,4 +146,5 @@ void foo(void) OFFSET(BP_loadflags, boot_params, hdr.loadflags); OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch); OFFSET(BP_version, boot_params, hdr.version); + OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment); } diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index e72f062fb4b5..898ecc47e129 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -125,6 +125,7 @@ int main(void) OFFSET(BP_loadflags, boot_params, hdr.loadflags); OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch); OFFSET(BP_version, boot_params, hdr.version); + OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment); BLANK(); DEFINE(PAGE_SIZE_asm, PAGE_SIZE); diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 30683883e0cd..dc5ed4bdd88d 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -608,13 +608,6 @@ ignore_int: ENTRY(initial_code) .long i386_start_kernel -.section .text -/* - * Real beginning of normal "text" segment - */ -ENTRY(stext) -ENTRY(_stext) - /* * BSS section */ diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 523bb697120d..7791eef95b91 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -214,8 +214,8 @@ unsigned long mmu_cr4_features; unsigned long mmu_cr4_features = X86_CR4_PAE; #endif -/* Boot loader ID as an integer, for the benefit of proc_dointvec */ -int bootloader_type; +/* Boot loader ID and version as integers, for the benefit of proc_dointvec */ +int bootloader_type, bootloader_version; /* * Setup options @@ -706,6 +706,12 @@ void __init setup_arch(char **cmdline_p) #endif saved_video_mode = boot_params.hdr.vid_mode; bootloader_type = boot_params.hdr.type_of_loader; + if ((bootloader_type >> 4) == 0xe) { + bootloader_type &= 0xf; + bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4; + } + bootloader_version = bootloader_type & 0xf; + bootloader_version |= boot_params.hdr.ext_loader_ver << 4; #ifdef CONFIG_BLK_DEV_RAM rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK; diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 849ee611f013..4c85b2e2bb65 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -1,5 +1,431 @@ +/* + * ld script for the x86 kernel + * + * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> + * + * Modernisation, unification and other changes and fixes: + * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org> + * + * + * Don't define absolute symbols until and unless you know that symbol + * value is should remain constant even if kernel image is relocated + * at run time. Absolute symbols are not relocated. If symbol value should + * change if kernel is relocated, make the symbol section relative and + * put it inside the section definition. + */ + #ifdef CONFIG_X86_32 -# include "vmlinux_32.lds.S" +#define LOAD_OFFSET __PAGE_OFFSET #else -# include "vmlinux_64.lds.S" +#define LOAD_OFFSET __START_KERNEL_map #endif + +#include <asm-generic/vmlinux.lds.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/page_types.h> +#include <asm/cache.h> +#include <asm/boot.h> + +#undef i386 /* in case the preprocessor is a 32bit one */ + +OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT) + +#ifdef CONFIG_X86_32 +OUTPUT_ARCH(i386) +ENTRY(phys_startup_32) +jiffies = jiffies_64; +#else +OUTPUT_ARCH(i386:x86-64) +ENTRY(phys_startup_64) +jiffies_64 = jiffies; +#endif + +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ +#ifdef CONFIG_X86_64 + user PT_LOAD FLAGS(7); /* RWE */ + data.init PT_LOAD FLAGS(7); /* RWE */ +#ifdef CONFIG_SMP + percpu PT_LOAD FLAGS(7); /* RWE */ +#endif + data.init2 PT_LOAD FLAGS(7); /* RWE */ +#endif + note PT_NOTE FLAGS(0); /* ___ */ +} + +SECTIONS +{ +#ifdef CONFIG_X86_32 + . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; + phys_startup_32 = startup_32 - LOAD_OFFSET; +#else + . = __START_KERNEL; + phys_startup_64 = startup_64 - LOAD_OFFSET; +#endif + + /* Text and read-only data */ + + /* bootstrapping code */ + .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { + _text = .; + *(.text.head) + } :text = 0x9090 + + /* The rest of the text */ + .text : AT(ADDR(.text) - LOAD_OFFSET) { +#ifdef CONFIG_X86_32 + /* not really needed, already page aligned */ + . = ALIGN(PAGE_SIZE); + *(.text.page_aligned) +#endif + . = ALIGN(8); + _stext = .; + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + IRQENTRY_TEXT + *(.fixup) + *(.gnu.warning) + /* End of text section */ + _etext = .; + } :text = 0x9090 + + NOTES :text :note + + /* Exception table */ + . = ALIGN(16); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } :text = 0x9090 + + RODATA + + /* Data */ + . = ALIGN(PAGE_SIZE); + .data : AT(ADDR(.data) - LOAD_OFFSET) { + DATA_DATA + CONSTRUCTORS + +#ifdef CONFIG_X86_64 + /* End of data section */ + _edata = .; +#endif + } :data + +#ifdef CONFIG_X86_32 + /* 32 bit has nosave before _edata */ + . = ALIGN(PAGE_SIZE); + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(PAGE_SIZE); + __nosave_end = .; + } +#endif + + . = ALIGN(PAGE_SIZE); + .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { + *(.data.page_aligned) + *(.data.idt) + } + +#ifdef CONFIG_X86_32 + . = ALIGN(32); +#else + . = ALIGN(PAGE_SIZE); + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); +#endif + .data.cacheline_aligned : + AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { + *(.data.cacheline_aligned) + } + + /* rarely changed data like cpu maps */ +#ifdef CONFIG_X86_32 + . = ALIGN(32); +#else + . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); +#endif + .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { + *(.data.read_mostly) + +#ifdef CONFIG_X86_32 + /* End of data section */ + _edata = .; +#endif + } + +#ifdef CONFIG_X86_64 + +#define VSYSCALL_ADDR (-10*1024*1024) +#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \ + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) +#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \ + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) + +#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) +#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) + +#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR) +#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) + + . = VSYSCALL_ADDR; + .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { + *(.vsyscall_0) + } :user + + __vsyscall_0 = VSYSCALL_VIRT_ADDR; + + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { + *(.vsyscall_fn) + } + + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) { + *(.vsyscall_gtod_data) + } + + vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); + .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) { + *(.vsyscall_clock) + } + vsyscall_clock = VVIRT(.vsyscall_clock); + + + .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) { + *(.vsyscall_1) + } + .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) { + *(.vsyscall_2) + } + + .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { + *(.vgetcpu_mode) + } + vgetcpu_mode = VVIRT(.vgetcpu_mode); + + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .jiffies : AT(VLOAD(.jiffies)) { + *(.jiffies) + } + jiffies = VVIRT(.jiffies); + + .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) { + *(.vsyscall_3) + } + + . = VSYSCALL_VIRT_ADDR + PAGE_SIZE; + +#undef VSYSCALL_ADDR +#undef VSYSCALL_PHYS_ADDR +#undef VSYSCALL_VIRT_ADDR +#undef VLOAD_OFFSET +#undef VLOAD +#undef VVIRT_OFFSET +#undef VVIRT + +#endif /* CONFIG_X86_64 */ + + /* init_task */ + . = ALIGN(THREAD_SIZE); + .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { + *(.data.init_task) + } +#ifdef CONFIG_X86_64 + :data.init +#endif + + /* + * smp_locks might be freed after init + * start/end must be page aligned + */ + . = ALIGN(PAGE_SIZE); + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + __smp_locks = .; + *(.smp_locks) + __smp_locks_end = .; + . = ALIGN(PAGE_SIZE); + } + + /* Init code and data - will be freed after init */ + . = ALIGN(PAGE_SIZE); + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { + __init_begin = .; /* paired with __init_end */ + _sinittext = .; + INIT_TEXT + _einittext = .; + } + + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { + INIT_DATA + } + + . = ALIGN(16); + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { + __setup_start = .; + *(.init.setup) + __setup_end = .; + } + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { + __initcall_start = .; + INITCALLS + __initcall_end = .; + } + + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { + __x86_cpu_dev_start = .; + *(.x86_cpu_dev.init) + __x86_cpu_dev_end = .; + } + + SECURITY_INIT + + . = ALIGN(8); + .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { + __parainstructions = .; + *(.parainstructions) + __parainstructions_end = .; + } + + . = ALIGN(8); + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + + .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { + *(.altinstr_replacement) + } + + /* + * .exit.text is discard at runtime, not link time, to deal with + * references from .altinstructions and .eh_frame + */ + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { + EXIT_TEXT + } + + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { + EXIT_DATA + } + +#ifdef CONFIG_BLK_DEV_INITRD + . = ALIGN(PAGE_SIZE); + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } +#endif + +#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) + /* + * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the + * output PHDR, so the next output section - __data_nosave - should + * start another section data.init2. Also, pda should be at the head of + * percpu area. Preallocate it and define the percpu offset symbol + * so that it can be accessed as a percpu variable. + */ + . = ALIGN(PAGE_SIZE); + PERCPU_VADDR(0, :percpu) +#else + PERCPU(PAGE_SIZE) +#endif + + . = ALIGN(PAGE_SIZE); + + /* freed after init ends here */ + .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) { + __init_end = .; + } + +#ifdef CONFIG_X86_64 + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { + . = ALIGN(PAGE_SIZE); + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(PAGE_SIZE); + __nosave_end = .; + } :data.init2 + /* use another section data.init2, see PERCPU_VADDR() above */ +#endif + + /* BSS */ + . = ALIGN(PAGE_SIZE); + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + __bss_start = .; + *(.bss.page_aligned) + *(.bss) + . = ALIGN(4); + __bss_stop = .; + } + + . = ALIGN(PAGE_SIZE); + .brk : AT(ADDR(.brk) - LOAD_OFFSET) { + __brk_base = .; + . += 64 * 1024; /* 64k alignment slop space */ + *(.brk_reservation) /* areas brk users have reserved */ + __brk_limit = .; + } + + .end : AT(ADDR(.end) - LOAD_OFFSET) { + _end = .; + } + + /* Sections to be discarded */ + /DISCARD/ : { + *(.exitcall.exit) + *(.eh_frame) + *(.discard) + } + + STABS_DEBUG + DWARF_DEBUG +} + + +#ifdef CONFIG_X86_32 +ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), + "kernel image bigger than KERNEL_IMAGE_SIZE") +#else +/* + * Per-cpu symbols which need to be offset from __per_cpu_load + * for the boot processor. + */ +#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load +INIT_PER_CPU(gdt_page); +INIT_PER_CPU(irq_stack_union); + +/* + * Build-time check on the image size: + */ +ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), + "kernel image bigger than KERNEL_IMAGE_SIZE") + +#ifdef CONFIG_SMP +ASSERT((per_cpu__irq_stack_union == 0), + "irq_stack_union is not at start of per-cpu area"); +#endif + +#endif /* CONFIG_X86_32 */ + +#ifdef CONFIG_KEXEC +#include <asm/kexec.h> + +ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, + "kexec control code size is too big") +#endif + diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S deleted file mode 100644 index 62ad500d55f3..000000000000 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ /dev/null @@ -1,229 +0,0 @@ -/* ld script to make i386 Linux kernel - * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; - * - * Don't define absolute symbols until and unless you know that symbol - * value is should remain constant even if kernel image is relocated - * at run time. Absolute symbols are not relocated. If symbol value should - * change if kernel is relocated, make the symbol section relative and - * put it inside the section definition. - */ - -#define LOAD_OFFSET __PAGE_OFFSET - -#include <asm-generic/vmlinux.lds.h> -#include <asm/thread_info.h> -#include <asm/page_types.h> -#include <asm/cache.h> -#include <asm/boot.h> - -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(phys_startup_32) -jiffies = jiffies_64; - -PHDRS { - text PT_LOAD FLAGS(5); /* R_E */ - data PT_LOAD FLAGS(7); /* RWE */ - note PT_NOTE FLAGS(0); /* ___ */ -} -SECTIONS -{ - . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; - phys_startup_32 = startup_32 - LOAD_OFFSET; - - .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ - *(.text.head) - } :text = 0x9090 - - /* read-only */ - .text : AT(ADDR(.text) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */ - *(.text.page_aligned) - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - IRQENTRY_TEXT - *(.fixup) - *(.gnu.warning) - _etext = .; /* End of text section */ - } :text = 0x9090 - - NOTES :text :note - - . = ALIGN(16); /* Exception table */ - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } :text = 0x9090 - - RODATA - - /* writeable */ - . = ALIGN(PAGE_SIZE); - .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ - DATA_DATA - CONSTRUCTORS - } :data - - . = ALIGN(PAGE_SIZE); - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - } - - . = ALIGN(PAGE_SIZE); - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - *(.data.page_aligned) - *(.data.idt) - } - - . = ALIGN(32); - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - *(.data.cacheline_aligned) - } - - /* rarely changed data like cpu maps */ - . = ALIGN(32); - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) - _edata = .; /* End of data section */ - } - - . = ALIGN(THREAD_SIZE); /* init_task */ - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - *(.data.init_task) - } - - /* might get freed after init */ - . = ALIGN(PAGE_SIZE); - .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { - __smp_locks = .; - *(.smp_locks) - __smp_locks_end = .; - } - /* will be freed after init - * Following ALIGN() is required to make sure no other data falls on the - * same page where __smp_alt_end is pointing as that page might be freed - * after boot. Always make sure that ALIGN() directive is present after - * the section which contains __smp_alt_end. - */ - . = ALIGN(PAGE_SIZE); - - /* will be freed after init */ - . = ALIGN(PAGE_SIZE); /* Init code and data */ - .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { - __init_begin = .; - _sinittext = .; - INIT_TEXT - _einittext = .; - } - .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { - INIT_DATA - } - . = ALIGN(16); - .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { - __x86_cpu_dev_start = .; - *(.x86_cpu_dev.init) - __x86_cpu_dev_end = .; - } - SECURITY_INIT - . = ALIGN(4); - .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { - __alt_instructions = .; - *(.altinstructions) - __alt_instructions_end = .; - } - .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { - *(.altinstr_replacement) - } - . = ALIGN(4); - .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { - __parainstructions = .; - *(.parainstructions) - __parainstructions_end = .; - } - /* .exit.text is discard at runtime, not link time, to deal with references - from .altinstructions and .eh_frame */ - .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { - EXIT_TEXT - } - .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { - EXIT_DATA - } -#if defined(CONFIG_BLK_DEV_INITRD) - . = ALIGN(PAGE_SIZE); - .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif - PERCPU(PAGE_SIZE) - . = ALIGN(PAGE_SIZE); - /* freed after init ends here */ - - .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - __init_end = .; - __bss_start = .; /* BSS */ - *(.bss.page_aligned) - *(.bss) - . = ALIGN(4); - __bss_stop = .; - } - - .brk : AT(ADDR(.brk) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __brk_base = . ; - . += 64 * 1024 ; /* 64k alignment slop space */ - *(.brk_reservation) /* areas brk users have reserved */ - __brk_limit = . ; - } - - .end : AT(ADDR(.end) - LOAD_OFFSET) { - _end = . ; - } - - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - *(.discard) - } - - STABS_DEBUG - - DWARF_DEBUG -} - -/* - * Build-time check on the image size: - */ -ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), - "kernel image bigger than KERNEL_IMAGE_SIZE") - -#ifdef CONFIG_KEXEC -/* Link time checks */ -#include <asm/kexec.h> - -ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, - "kexec control code size is too big") -#endif diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S deleted file mode 100644 index c8742507b030..000000000000 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ /dev/null @@ -1,298 +0,0 @@ -/* ld script to make x86-64 Linux kernel - * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; - */ - -#define LOAD_OFFSET __START_KERNEL_map - -#include <asm-generic/vmlinux.lds.h> -#include <asm/asm-offsets.h> -#include <asm/page_types.h> - -#undef i386 /* in case the preprocessor is a 32bit one */ - -OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") -OUTPUT_ARCH(i386:x86-64) -ENTRY(phys_startup_64) -jiffies_64 = jiffies; -PHDRS { - text PT_LOAD FLAGS(5); /* R_E */ - data PT_LOAD FLAGS(7); /* RWE */ - user PT_LOAD FLAGS(7); /* RWE */ - data.init PT_LOAD FLAGS(7); /* RWE */ -#ifdef CONFIG_SMP - percpu PT_LOAD FLAGS(7); /* RWE */ -#endif - data.init2 PT_LOAD FLAGS(7); /* RWE */ - note PT_NOTE FLAGS(0); /* ___ */ -} -SECTIONS -{ - . = __START_KERNEL; - phys_startup_64 = startup_64 - LOAD_OFFSET; - .text : AT(ADDR(.text) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ - /* First the code that has to be first for bootstrapping */ - *(.text.head) - _stext = .; - /* Then the rest */ - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - IRQENTRY_TEXT - *(.fixup) - *(.gnu.warning) - _etext = .; /* End of text section */ - } :text = 0x9090 - - NOTES :text :note - - . = ALIGN(16); /* Exception table */ - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } :text = 0x9090 - - RODATA - - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ - /* Data */ - .data : AT(ADDR(.data) - LOAD_OFFSET) { - DATA_DATA - CONSTRUCTORS - _edata = .; /* End of data section */ - } :data - - - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - *(.data.cacheline_aligned) - } - . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) - } - -#define VSYSCALL_ADDR (-10*1024*1024) -#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) -#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) - -#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) -#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) - -#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR) -#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) - - . = VSYSCALL_ADDR; - .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user - __vsyscall_0 = VSYSCALL_VIRT_ADDR; - - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) } - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) - { *(.vsyscall_gtod_data) } - vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); - .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) - { *(.vsyscall_clock) } - vsyscall_clock = VVIRT(.vsyscall_clock); - - - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) - { *(.vsyscall_1) } - .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) - { *(.vsyscall_2) } - - .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } - vgetcpu_mode = VVIRT(.vgetcpu_mode); - - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) } - jiffies = VVIRT(.jiffies); - - .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) - { *(.vsyscall_3) } - - . = VSYSCALL_VIRT_ADDR + PAGE_SIZE; - -#undef VSYSCALL_ADDR -#undef VSYSCALL_PHYS_ADDR -#undef VSYSCALL_VIRT_ADDR -#undef VLOAD_OFFSET -#undef VLOAD -#undef VVIRT_OFFSET -#undef VVIRT - - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - . = ALIGN(THREAD_SIZE); /* init_task */ - *(.data.init_task) - }:data.init - - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) - } - - .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { - /* might get freed after init */ - . = ALIGN(PAGE_SIZE); - __smp_alt_begin = .; - __smp_locks = .; - *(.smp_locks) - __smp_locks_end = .; - . = ALIGN(PAGE_SIZE); - __smp_alt_end = .; - } - - . = ALIGN(PAGE_SIZE); /* Init code and data */ - __init_begin = .; /* paired with __init_end */ - .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { - _sinittext = .; - INIT_TEXT - _einittext = .; - } - .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { - __initdata_begin = .; - INIT_DATA - __initdata_end = .; - } - - .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { - . = ALIGN(16); - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { - __x86_cpu_dev_start = .; - *(.x86_cpu_dev.init) - __x86_cpu_dev_end = .; - } - SECURITY_INIT - - . = ALIGN(8); - .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { - __parainstructions = .; - *(.parainstructions) - __parainstructions_end = .; - } - - .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { - . = ALIGN(8); - __alt_instructions = .; - *(.altinstructions) - __alt_instructions_end = .; - } - .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { - *(.altinstr_replacement) - } - /* .exit.text is discard at runtime, not link time, to deal with references - from .altinstructions and .eh_frame */ - .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { - EXIT_TEXT - } - .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { - EXIT_DATA - } - -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(PAGE_SIZE); - .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif - -#ifdef CONFIG_SMP - /* - * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the - * output PHDR, so the next output section - __data_nosave - should - * start another section data.init2. Also, pda should be at the head of - * percpu area. Preallocate it and define the percpu offset symbol - * so that it can be accessed as a percpu variable. - */ - . = ALIGN(PAGE_SIZE); - PERCPU_VADDR(0, :percpu) -#else - PERCPU(PAGE_SIZE) -#endif - - . = ALIGN(PAGE_SIZE); - __init_end = .; - - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - } :data.init2 /* use another section data.init2, see PERCPU_VADDR() above */ - - .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __bss_start = .; /* BSS */ - *(.bss.page_aligned) - *(.bss) - __bss_stop = .; - } - - .brk : AT(ADDR(.brk) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __brk_base = . ; - . += 64 * 1024 ; /* 64k alignment slop space */ - *(.brk_reservation) /* areas brk users have reserved */ - __brk_limit = . ; - } - - _end = . ; - - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - *(.eh_frame) - *(.discard) - } - - STABS_DEBUG - - DWARF_DEBUG -} - - /* - * Per-cpu symbols which need to be offset from __per_cpu_load - * for the boot processor. - */ -#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load -INIT_PER_CPU(gdt_page); -INIT_PER_CPU(irq_stack_union); - -/* - * Build-time check on the image size: - */ -ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), - "kernel image bigger than KERNEL_IMAGE_SIZE") - -#ifdef CONFIG_SMP -ASSERT((per_cpu__irq_stack_union == 0), - "irq_stack_union is not at start of per-cpu area"); -#endif - -#ifdef CONFIG_KEXEC -#include <asm/kexec.h> - -ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, - "kexec control code size is too big") -#endif |
