diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/configs/omap_h2_1610_defconfig | 60 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h2-mmc.c | 110 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h3-mmc.c | 114 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 22 |
6 files changed, 306 insertions, 14 deletions
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index b8a78ab49cdd..64aa431f8514 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -74,12 +74,20 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set + +# +# Block layer +# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -358,8 +366,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# # CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -408,6 +428,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set @@ -463,7 +487,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# # CONFIG_MD is not set + +# +# Network device support +# CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set @@ -472,6 +504,10 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -481,6 +517,10 @@ CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y # +# Token Ring devices +# + +# # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set @@ -505,6 +545,10 @@ CONFIG_SLHC=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# # CONFIG_ISDN is not set # @@ -541,6 +585,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_POLLDEV is not set # # Hardware I/O ports @@ -575,6 +620,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# # CONFIG_IPMI_HANDLER is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -588,6 +637,10 @@ CONFIG_WATCHDOG_NOWAYOUT=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -771,8 +824,9 @@ CONFIG_DNOTIFY=y # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -838,7 +892,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -862,7 +916,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 391b6f4827f6..416a778611b4 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -13,13 +13,13 @@ obj-$(CONFIG_PM) += pm.o sleep.o led-y := leds.o # Specific board support -obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o +obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o -obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o +obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c new file mode 100644 index 000000000000..6fdc78406b21 --- /dev/null +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -0,0 +1,110 @@ +/* + * linux/arch/arm/mach-omap1/board-h2-mmc.c + * + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * Author: Felipe Balbi <felipe.lima@indt.org.br> + * + * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/arch/mmc.h> +#include <asm/arch/gpio.h> + +#ifdef CONFIG_MMC_OMAP +static int slot_cover_open; +static struct device *mmc_device; + +static int h2_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, + power_on ? "on" : "off", vdd); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h2_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h2_mmc_get_cover_state(struct device *dev, int slot) +{ + BUG_ON(slot != 0); + + return slot_cover_open; +} + +void h2_mmc_slot_cover_handler(void *arg, int state) +{ + if (mmc_device == NULL) + return; + + slot_cover_open = state; + omap_mmc_notify_cover_event(mmc_device, 0, state); +} + +static int h2_mmc_late_init(struct device *dev) +{ + int ret = 0; + + mmc_device = dev; + + return ret; +} + +static void h2_mmc_cleanup(struct device *dev) +{ +} + +static struct omap_mmc_platform_data h2_mmc_data = { + .nr_slots = 1, + .switch_slot = NULL, + .init = h2_mmc_late_init, + .cleanup = h2_mmc_cleanup, + .slots[0] = { + .set_power = h2_mmc_set_power, + .set_bus_mode = h2_mmc_set_bus_mode, + .get_ro = NULL, + .get_cover_state = h2_mmc_get_cover_state, + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +void __init h2_mmc_init(void) +{ + omap_set_mmc_info(1, &h2_mmc_data); +} + +#else + +void __init h2_mmc_init(void) +{ +} + +void h2_mmc_slot_cover_handler(void *arg, int state) +{ +} +#endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 18899d74d4c0..ab6e68b00064 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -389,15 +389,14 @@ static struct omap_usb_config h2_usb_config __initdata = { }; static struct omap_mmc_config h2_mmc_config __initdata = { - .mmc [0] = { - .enabled = 1, + .mmc[0] = { + .enabled = 1, .wire4 = 1, - .wp_pin = OMAP_MPUIO(3), - .power_pin = -1, /* tps65010 gpio3 */ - .switch_pin = OMAP_MPUIO(1), }, }; +extern struct omap_mmc_platform_data h2_mmc_data; + static struct omap_uart_config h2_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -459,6 +458,7 @@ static void __init h2_init(void) omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); + h2_mmc_init(); /* irq for tps65010 chip */ omap_cfg_reg(W4_GPIO58); diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c new file mode 100644 index 000000000000..66ecc437928f --- /dev/null +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -0,0 +1,114 @@ +/* + * linux/arch/arm/mach-omap1/board-h3-mmc.c + * + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * Author: Felipe Balbi <felipe.lima@indt.org.br> + * + * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/arch/mmc.h> +#include <asm/arch/gpio.h> + +#ifdef CONFIG_MMC_OMAP +static int slot_cover_open; +static struct device *mmc_device; + +static int h3_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, + power_on ? "on" : "off", vdd); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h3_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) +{ + int ret = 0; + +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + /* Treated on upper level */ + + return bus_mode; +} + +static int h3_mmc_get_cover_state(struct device *dev, int slot) +{ + BUG_ON(slot != 0); + + return slot_cover_open; +} + +void h3_mmc_slot_cover_handler(void *arg, int state) +{ + if (mmc_device == NULL) + return; + + slot_cover_open = state; + omap_mmc_notify_cover_event(mmc_device, 0, state); +} + +static int h3_mmc_late_init(struct device *dev) +{ + int ret = 0; + + mmc_device = dev; + + return ret; +} + +static void h3_mmc_cleanup(struct device *dev) +{ +} + +static struct omap_mmc_platform_data h3_mmc_data = { + .nr_slots = 1, + .switch_slot = NULL, + .init = h3_mmc_late_init, + .cleanup = h3_mmc_cleanup, + .slots[0] = { + .set_power = h3_mmc_set_power, + .set_bus_mode = h3_mmc_set_bus_mode, + .get_ro = NULL, + .get_cover_state = h3_mmc_get_cover_state, + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +void __init h3_mmc_init(void) +{ + omap_set_mmc_info(1, &h3_mmc_data); +} + +#else + +void __init h3_mmc_init(void) +{ +} + +void h3_mmc_slot_cover_handler(void *arg, int state) +{ +} +#endif diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 67ae5035a7ef..f28f05d6760d 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -437,12 +437,13 @@ static struct omap_usb_config h3_usb_config __initdata = { static struct omap_mmc_config h3_mmc_config __initdata = { .mmc[0] = { - .enabled = 1, - .power_pin = -1, /* tps65010 GPIO4 */ - .switch_pin = OMAP_MPUIO(1), - }, + .enabled = 1, + .wire4 = 1, + }, }; +extern struct omap_mmc_platform_data h3_mmc_data; + static struct omap_uart_config h3_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -471,6 +472,18 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { */ }; +static struct omap_gpio_switch h3_gpio_switches[] __initdata = { + { + .name = "mmc_slot", + .gpio = OMAP_MPUIO(1), + .type = OMAP_GPIO_SWITCH_TYPE_COVER, + .debounce_rising = 100, + .debounce_falling = 0, + .notify = h3_mmc_slot_cover_handler, + .notify_data = NULL, + }, +}; + #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct omap_nand_platform_data *data) @@ -504,6 +517,7 @@ static void __init h3_init(void) omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); + h3_mmc_init(); /* FIXME setup irq for tps65013 chip */ i2c_register_board_info(1, h3_i2c_board_info, |
