diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/platforms/85xx/Makefile | 3 | ||||
-rw-r--r-- | arch/powerpc/platforms/85xx/mpc8540_ads.h | 24 | ||||
-rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx.h | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_ads.c | 67 | ||||
-rw-r--r-- | arch/powerpc/platforms/85xx/pci.c | 96 |
5 files changed, 166 insertions, 25 deletions
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 70e1190809f8..ffc4139cb214 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -1,4 +1,5 @@ # # Makefile for the PowerPC 85xx linux kernel. # -obj-$(CONFIG_PPC_85xx) += misc.o mpc85xx_ads.o +obj-$(CONFIG_PPC_85xx) += misc.o pci.o +obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h index b3ec88caad11..f770cadb2080 100644 --- a/arch/powerpc/platforms/85xx/mpc8540_ads.h +++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h @@ -30,30 +30,6 @@ #define PIRQC MPC85xx_IRQ_EXT3 #define PIRQD MPC85xx_IRQ_EXT4 -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -/* PCI config */ -#define PCI1_CFG_ADDR_OFFSET (0x8000) -#define PCI1_CFG_DATA_OFFSET (0x8004) - -#define PCI2_CFG_ADDR_OFFSET (0x9000) -#define PCI2_CFG_DATA_OFFSET (0x9004) - -/* Additional register for PCI-X configuration */ -#define PCIX_NEXT_CAP 0x60 -#define PCIX_CAP_ID 0x61 -#define PCIX_COMMAND 0x62 -#define PCIX_STATUS 0x64 - /* Offset of CPM register space */ #define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index be75abb2a283..b44db6268f3d 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -15,3 +15,4 @@ */ extern void mpc85xx_restart(char *); +extern int add_bridge(struct device_node *dev); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index ba6798d47654..b7821dbae00d 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -67,6 +67,62 @@ static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { 0x0, /* External 11: */ }; +#ifdef CONFIG_PCI +/* + * interrupt routing + */ + +int +mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * This is little evil, but works around the fact + * that revA boards have IDSEL starting at 18 + * and others boards (older) start at 12 + * + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ + }; + + const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +int +mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +#endif /* CONFIG_PCI */ + + void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic1; @@ -110,6 +166,7 @@ void __init mpc85xx_ads_pic_init(void) static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; + struct device_node *np; if (ppc_md.progress) ppc_md.progress("mpc85xx_ads_setup_arch()", 0); @@ -125,6 +182,16 @@ static void __init mpc85xx_ads_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(cpu); } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#endif + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c new file mode 100644 index 000000000000..bad290110ed1 --- /dev/null +++ b/arch/powerpc/platforms/85xx/pci.c @@ -0,0 +1,96 @@ +/* + * FSL SoC setup code + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/module.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> +#include <sysdev/fsl_soc.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +int mpc85xx_pci2_busno = 0; + +#ifdef CONFIG_PCI +int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int primary = 1, has_address = 0; + phys_addr_t immr = get_immrbase(); + + DBG("Adding PCI host bridge %s\n", dev->full_name); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + } + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + hose->arch_data = dev; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + /* PCI 1 */ + if ((rsrc.start & 0xfffff) == 0x8000) { + setup_indirect_pci(hose, immr + 0x8000, immr + 0x8004); + } + /* PCI 2 */ + if ((rsrc.start & 0xfffff) == 0x9000) { + setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004); + primary = 0; + hose->bus_offset = hose->first_busno; + mpc85xx_pci2_busno = hose->first_busno; + } + + printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + return 0; +} + +#endif |