diff options
Diffstat (limited to 'arch')
772 files changed, 28565 insertions, 22730 deletions
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index eb20c3afff58..a8682612abc0 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -43,21 +43,17 @@ #include "proto.h" #include "pci_impl.h" -void default_idle(void) -{ - barrier(); -} - void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); + while (1) { - void (*idle)(void) = default_idle; /* FIXME -- EV6 and LCA45 know how to power down the CPU. */ while (!need_resched()) - idle(); + cpu_relax(); schedule(); } } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 296bc03d1cf1..4b15f5f1e254 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -239,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig" source "arch/arm/mach-omap1/Kconfig" +source "arch/arm/mach-omap2/Kconfig" + source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-lh7a40x/Kconfig" @@ -324,7 +326,7 @@ menu "Kernel Features" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && BROKEN #&& n + depends on EXPERIMENTAL && REALVIEW_MPCORE help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -356,6 +358,16 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. +config LOCAL_TIMERS + bool "Use local timer interrupts" + depends on SMP && REALVIEW_MPCORE + default y + help + Enable support for local timers on SMP platforms, rather then the + legacy IPI broadcast method. Local timers allows the system + accounting to be spread across the timer interval, preventing a + "thundering herd" at every timer tick. + config PREEMPT bool "Preemptible Kernel (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -585,7 +597,7 @@ config FPE_NWFPE config FPE_NWFPE_XP bool "Support extended precision" - depends on FPE_NWFPE && !CPU_BIG_ENDIAN + depends on FPE_NWFPE help Say Y to include 80-bit support in the kernel floating-point emulator. Otherwise, only 32 and 64-bit support is compiled in. @@ -640,25 +652,11 @@ endmenu menu "Power management options" -config PM - bool "Power Management support" - ---help--- - "Power Management" means that parts of your computer are shut - off or put into a power conserving "sleep" mode if they are not - being used. There are two competing standards for doing this: APM - and ACPI. If you want to use either one, say Y here and then also - to the requisite support below. - - Power Management is most important for battery powered laptop - computers; if you have a laptop, check out the Linux Laptop home - page on the WWW at <http://www.linux-on-laptops.com/> or - Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/> - and the Battery Powered Linux mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. +source "kernel/power/Kconfig" config APM tristate "Advanced Power Management Emulation" - depends on PM + depends on PM_LEGACY ---help--- APM is a BIOS specification for saving power using several different techniques. This is mostly useful for battery powered laptops with @@ -690,6 +688,8 @@ menu "Device Drivers" source "drivers/base/Kconfig" +source "drivers/connector/Kconfig" + if ALIGNMENT_TRAP source "drivers/mtd/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 114cda7f1b73..81bd2193fe6d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_OMAP1) := omap1 + machine-$(CONFIG_ARCH_OMAP2) := omap2 incdir-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7c7f475e213e..6abafb6f1844 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -19,38 +19,28 @@ */ #ifdef DEBUG -#include <asm/arch/debug-macro.S> - #if defined(CONFIG_DEBUG_ICEDCC) .macro loadsp, rb .endm - .macro writeb, ch, rb + .macro writeb, ch, rb mcr p14, 0, \ch, c0, c1, 0 .endm #else + +#include <asm/arch/debug-macro.S> + .macro writeb, ch, rb senduart \ch, \rb .endm -#if defined(CONFIG_FOOTBRIDGE) || \ - defined(CONFIG_ARCH_RPC) || \ - defined(CONFIG_ARCH_INTEGRATOR) || \ - defined(CONFIG_ARCH_PXA) || \ - defined(CONFIG_ARCH_IXP4XX) || \ - defined(CONFIG_ARCH_IXP2000) || \ - defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) - .macro loadsp, rb - addruart \rb - .endm -#elif defined(CONFIG_ARCH_SA1100) +#if defined(CONFIG_ARCH_SA1100) .macro loadsp, rb mov \rb, #0x80000000 @ physical base address -# if defined(CONFIG_DEBUG_LL_SER3) +#ifdef CONFIG_DEBUG_LL_SER3 add \rb, \rb, #0x00050000 @ Ser3 -# else +#else add \rb, \rb, #0x00010000 @ Ser1 -# endif +#endif .endm #elif defined(CONFIG_ARCH_IOP331) .macro loadsp, rb @@ -64,7 +54,9 @@ add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT .endm #else -#error no serial architecture defined + .macro loadsp, rb + addruart \rb + .endm #endif #endif #endif diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 50f13eec6cd7..5ab94584baee 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -283,8 +283,14 @@ void flush_window(void) putstr("."); } +#ifndef arch_error +#define arch_error(x) +#endif + static void error(char *x) { + arch_error(x); + putstr("\n\n"); putstr(x); putstr("\n\n -- System halted"); diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index ad55680726ed..1b7eaab02b9e 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -550,9 +550,9 @@ struct locomo_save_data { u16 LCM_SPIMD; }; -static int locomo_suspend(struct device *dev, pm_message_t state) +static int locomo_suspend(struct platform_device *dev, pm_message_t state) { - struct locomo *lchip = dev_get_drvdata(dev); + struct locomo *lchip = platform_get_drvdata(dev); struct locomo_save_data *save; unsigned long flags; @@ -560,7 +560,7 @@ static int locomo_suspend(struct device *dev, pm_message_t state) if (!save) return -ENOMEM; - dev->power.saved_state = (void *) save; + dev->dev.power.saved_state = (void *) save; spin_lock_irqsave(&lchip->lock, flags); @@ -594,14 +594,14 @@ static int locomo_suspend(struct device *dev, pm_message_t state) return 0; } -static int locomo_resume(struct device *dev) +static int locomo_resume(struct platform_device *dev) { - struct locomo *lchip = dev_get_drvdata(dev); + struct locomo *lchip = platform_get_drvdata(dev); struct locomo_save_data *save; unsigned long r; unsigned long flags; - save = (struct locomo_save_data *) dev->power.saved_state; + save = (struct locomo_save_data *) dev->dev.power.saved_state; if (!save) return 0; @@ -623,8 +623,6 @@ static int locomo_resume(struct device *dev) locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD); spin_unlock_irqrestore(&lchip->lock, flags); - - dev->power.saved_state = NULL; kfree(save); return 0; @@ -760,27 +758,26 @@ static void __locomo_remove(struct locomo *lchip) kfree(lchip); } -static int locomo_probe(struct device *dev) +static int locomo_probe(struct platform_device *dev) { - struct platform_device *pdev = to_platform_device(dev); struct resource *mem; int irq; - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!mem) return -EINVAL; - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq(dev, 0); - return __locomo_probe(dev, mem, irq); + return __locomo_probe(&dev->dev, mem, irq); } -static int locomo_remove(struct device *dev) +static int locomo_remove(struct platform_device *dev) { - struct locomo *lchip = dev_get_drvdata(dev); + struct locomo *lchip = platform_get_drvdata(dev); if (lchip) { __locomo_remove(lchip); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(dev, NULL); } return 0; @@ -792,15 +789,16 @@ static int locomo_remove(struct device *dev) * the per-machine level, and then have this driver pick * up the registered devices. */ -static struct device_driver locomo_device_driver = { - .name = "locomo", - .bus = &platform_bus_type, +static struct platform_driver locomo_device_driver = { .probe = locomo_probe, .remove = locomo_remove, #ifdef CONFIG_PM .suspend = locomo_suspend, .resume = locomo_resume, #endif + .driver = { + .name = "locomo", + }, }; /* @@ -1126,13 +1124,13 @@ static int __init locomo_init(void) { int ret = bus_register(&locomo_bus_type); if (ret == 0) - driver_register(&locomo_device_driver); + platform_driver_register(&locomo_device_driver); return ret; } static void __exit locomo_exit(void) { - driver_unregister(&locomo_device_driver); + platform_driver_unregister(&locomo_device_driver); bus_unregister(&locomo_bus_type); } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 174aa86ee816..d0d6e6d2d649 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -32,6 +32,7 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/mach/irq.h> +#include <asm/sizes.h> #include <asm/hardware/sa1111.h> @@ -132,6 +133,17 @@ static struct sa1111_dev_info sa1111_devices[] = { }, }; +void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes) +{ + unsigned int sz = SZ_1M >> PAGE_SHIFT; + + if (node != 0) + sz = 0; + + size[1] = size[0] - sz; + size[0] = sz; +} + /* * SA1111 interrupt support. Since clearing an IRQ while there are * active IRQs causes the interrupt output to pulse, the upper levels @@ -801,9 +813,9 @@ struct sa1111_save_data { #ifdef CONFIG_PM -static int sa1111_suspend(struct device *dev, pm_message_t state) +static int sa1111_suspend(struct platform_device *dev, pm_message_t state) { - struct sa1111 *sachip = dev_get_drvdata(dev); + struct sa1111 *sachip = platform_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags; unsigned int val; @@ -812,7 +824,7 @@ static int sa1111_suspend(struct device *dev, pm_message_t state) save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); if (!save) return -ENOMEM; - dev->power.saved_state = save; + dev->dev.power.saved_state = save; spin_lock_irqsave(&sachip->lock, flags); @@ -859,14 +871,14 @@ static int sa1111_suspend(struct device *dev, pm_message_t state) * restored by their respective drivers, and must be called * via LDM after this function. */ -static int sa1111_resume(struct device *dev) +static int sa1111_resume(struct platform_device *dev) { - struct sa1111 *sachip = dev_get_drvdata(dev); + struct sa1111 *sachip = platform_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; - save = (struct sa1111_save_data *)dev->power.saved_state; + save = (struct sa1111_save_data *)dev->dev.power.saved_state; if (!save) return 0; @@ -879,7 +891,7 @@ static int sa1111_resume(struct device *dev) id = sa1111_readl(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { __sa1111_remove(sachip); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(dev, NULL); kfree(save); return 0; } @@ -911,7 +923,7 @@ static int sa1111_resume(struct device *dev) spin_unlock_irqrestore(&sachip->lock, flags); - dev->power.saved_state = NULL; + dev->dev.power.saved_state = NULL; kfree(save); return 0; @@ -922,9 +934,8 @@ static int sa1111_resume(struct device *dev) #define sa1111_resume NULL #endif -static int sa1111_probe(struct device *dev) +static int sa1111_probe(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(dev); struct resource *mem; int irq; @@ -933,20 +944,20 @@ static int sa1111_probe(struct device *dev) return -EINVAL; irq = platform_get_irq(pdev, 0); - return __sa1111_probe(dev, mem, irq); + return __sa1111_probe(&pdev->dev, mem, irq); } -static int sa1111_remove(struct device *dev) +static int sa1111_remove(struct platform_device *pdev) { - struct sa1111 *sachip = dev_get_drvdata(dev); + struct sa1111 *sachip = platform_get_drvdata(pdev); if (sachip) { __sa1111_remove(sachip); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(pdev, NULL); #ifdef CONFIG_PM - kfree(dev->power.saved_state); - dev->power.saved_state = NULL; + kfree(pdev->dev.power.saved_state); + pdev->dev.power.saved_state = NULL; #endif } @@ -962,13 +973,14 @@ static int sa1111_remove(struct device *dev) * We also need to handle the SDRAM configuration for * PXA250/SA1110 machine classes. */ -static struct device_driver sa1111_device_driver = { - .name = "sa1111", - .bus = &platform_bus_type, +static struct platform_driver sa1111_device_driver = { .probe = sa1111_probe, .remove = sa1111_remove, .suspend = sa1111_suspend, .resume = sa1111_resume, + .driver = { + .name = "sa1111", + }, }; /* @@ -1256,17 +1268,17 @@ static int __init sa1111_init(void) { int ret = bus_register(&sa1111_bus_type); if (ret == 0) - driver_register(&sa1111_device_driver); + platform_driver_register(&sa1111_device_driver); return ret; } static void __exit sa1111_exit(void) { - driver_unregister(&sa1111_device_driver); + platform_driver_unregister(&sa1111_device_driver); bus_unregister(&sa1111_bus_type); } -module_init(sa1111_init); +subsys_initcall(sa1111_init); module_exit(sa1111_exit); MODULE_DESCRIPTION("Intel Corporation SA1111 core driver"); diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index bb4eff614413..0c3cbd9a388b 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -19,12 +19,6 @@ #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) -/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c - There is no easy way to link multiple scoop devices into one - single entity for the pxa2xx_pcmcia device */ -int scoop_num; -struct scoop_pcmcia_dev *scoop_devs; - struct scoop_dev { void *base; spinlock_t scoop_lock; @@ -104,9 +98,9 @@ static void check_scoop_reg(struct scoop_dev *sdev) } #ifdef CONFIG_PM -static int scoop_suspend(struct device *dev, pm_message_t state) +static int scoop_suspend(struct platform_device *dev, pm_message_t state) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = platform_get_drvdata(dev); check_scoop_reg(sdev); sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); @@ -115,9 +109,9 @@ static int scoop_suspend(struct device *dev, pm_message_t state) return 0; } -static int scoop_resume(struct device *dev) +static int scoop_resume(struct platform_device *dev) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = platform_get_drvdata(dev); check_scoop_reg(sdev); SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; @@ -129,11 +123,10 @@ static int scoop_resume(struct device *dev) #define scoop_resume NULL #endif -int __init scoop_probe(struct device *dev) +int __init scoop_probe(struct platform_device *pdev) { struct scoop_dev *devptr; struct scoop_config *inf; - struct platform_device *pdev = to_platform_device(dev); struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) @@ -147,7 +140,7 @@ int __init scoop_probe(struct device *dev) memset(devptr, 0, sizeof(struct scoop_dev)); spin_lock_init(&devptr->scoop_lock); - inf = dev->platform_data; + inf = pdev->dev.platform_data; devptr->base = ioremap(mem->start, mem->end - mem->start + 1); if (!devptr->base) { @@ -155,12 +148,12 @@ int __init scoop_probe(struct device *dev) return -ENOMEM; } - dev_set_drvdata(dev, devptr); + platform_set_drvdata(pdev, devptr); printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base); SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140; - reset_scoop(dev); + reset_scoop(&pdev->dev); SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff; SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff; @@ -170,29 +163,30 @@ int __init scoop_probe(struct device *dev) return 0; } -static int scoop_remove(struct device *dev) +static int scoop_remove(struct platform_device *pdev) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = platform_get_drvdata(pdev); if (sdev) { iounmap(sdev->base); kfree(sdev); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(pdev, NULL); } return 0; } -static struct device_driver scoop_driver = { - .name = "sharp-scoop", - .bus = &platform_bus_type, +static struct platform_driver scoop_driver = { .probe = scoop_probe, .remove = scoop_remove, .suspend = scoop_suspend, .resume = scoop_resume, + .driver = { + .name = "sharp-scoop", + }, }; int __init scoop_init(void) { - return driver_register(&scoop_driver); + return platform_driver_register(&scoop_driver); } subsys_initcall(scoop_init); diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index 30e6444f9aaa..fd7c0042bcca 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:51:52 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:12:48 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -124,7 +144,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -144,6 +163,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -162,6 +183,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -205,14 +227,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -228,6 +255,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -238,6 +269,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -273,6 +305,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -307,7 +340,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -358,21 +395,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -410,12 +439,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -455,6 +490,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -464,6 +500,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -609,6 +646,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -634,7 +672,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -649,7 +686,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -662,6 +698,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -671,6 +708,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -701,6 +739,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -711,6 +750,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -765,10 +812,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -777,6 +820,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -796,11 +840,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -816,6 +859,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -848,6 +892,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -886,6 +931,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -894,7 +940,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -920,6 +968,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index ddeb9f99d662..e6a4d2656fe5 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:52:01 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:14:13 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -411,12 +440,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -456,6 +491,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -465,6 +501,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -702,6 +740,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -712,6 +751,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -778,6 +821,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -817,6 +860,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -849,6 +893,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 32bd552e0986..5572cf95d5f8 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:52:10 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:14:50 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -411,12 +440,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -457,6 +492,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -466,6 +502,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -703,6 +741,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -713,6 +752,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -740,6 +783,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -779,6 +822,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -818,6 +861,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -850,6 +894,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index 81d3a0606f95..0fddbde85835 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:52:23 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:14:56 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0" # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -411,12 +440,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -456,6 +491,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -465,6 +501,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -702,6 +740,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -712,6 +751,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -778,6 +821,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -817,6 +860,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -849,6 +893,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 66ac0885df3e..89b9aa06aa91 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:52:16 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:15:03 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -411,12 +440,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -457,6 +492,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -466,6 +502,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -703,6 +741,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -713,6 +752,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -740,6 +783,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -779,6 +822,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -818,6 +861,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -850,6 +894,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 4198677cd394..529f0f72e1e9 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Mon Sep 5 18:07:12 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 18:53:40 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -60,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_KMOD is not set # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -81,6 +100,7 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_LH7A40X is not set CONFIG_ARCH_OMAP=y # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -112,7 +132,7 @@ CONFIG_OMAP_SERIAL_WAKE=y # OMAP Core Type # # CONFIG_ARCH_OMAP730 is not set -# CONFIG_ARCH_OMAP1510 is not set +# CONFIG_ARCH_OMAP15XX is not set CONFIG_ARCH_OMAP16XX=y # @@ -177,6 +197,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -258,14 +280,19 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -281,6 +308,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -291,6 +322,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -328,21 +360,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -369,10 +393,12 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -404,6 +430,11 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -439,6 +470,7 @@ CONFIG_PPP=y # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y @@ -541,18 +573,18 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set -CONFIG_ISP1301_OMAP=y # # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -560,6 +592,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -576,7 +612,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -589,6 +624,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -600,6 +636,7 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set +# CONFIG_FONT_RL is not set # # Logo configuration @@ -624,10 +661,10 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +# CONFIG_OBSOLETE_OSS_DRIVER is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_AD1980 is not set # # USB support @@ -637,22 +674,21 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set -CONFIG_USB_GADGET_OMAP=y -CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -673,10 +709,6 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -685,6 +717,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -706,10 +739,10 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437 # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -750,6 +783,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -859,6 +893,7 @@ CONFIG_CRYPTO_DES=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 756348bf5170..3f97590c91f2 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-git8 -# Thu Sep 8 19:24:02 2005 +# Linux kernel version: 2.6.15-rc1 +# Sun Nov 13 17:41:24 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -62,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -83,6 +100,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -108,6 +126,7 @@ CONFIG_CPU_S3C2440=y # S3C2410 Boot # # CONFIG_S3C2410_BOOT_WATCHDOG is not set +# CONFIG_S3C2410_BOOT_ERROR_RESET is not set # # S3C2410 Setup @@ -142,6 +161,7 @@ CONFIG_CPU_TLB_V4WBI=y # # Bus support # +CONFIG_ISA=y CONFIG_ISA_DMA_API=y # @@ -152,7 +172,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -163,6 +182,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -253,6 +273,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -260,7 +284,6 @@ CONFIG_TCP_CONG_BIC=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -300,6 +323,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -335,7 +359,6 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_IMPA7 is not set CONFIG_MTD_BAST=y CONFIG_MTD_BAST_MAXSIZE=4 @@ -370,6 +393,11 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_NANDSIM is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # CONFIG_PARPORT=y @@ -381,10 +409,12 @@ CONFIG_PARPORT_1284=y # # Plug and Play support # +# CONFIG_PNP is not set # # Block devices # +# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -395,14 +425,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -428,6 +450,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_IDE_GENERIC=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDE_BAST=y +# CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -467,6 +490,11 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# # PHY device support # # CONFIG_PHYLIB is not set @@ -475,9 +503,19 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -CONFIG_DM9000=m +CONFIG_DM9000=y +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -490,6 +528,7 @@ CONFIG_DM9000=m # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -542,6 +581,9 @@ CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -568,6 +610,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_ESPSERIAL is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set @@ -590,6 +633,10 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_FOURPORT is not set +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_HUB6 is not set # # Non-8250 serial port support @@ -622,6 +669,13 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_S3C2410_WATCHDOG=y + +# +# ISA-based Watchdog Cards +# +# CONFIG_PCWATCHDOG is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_WDT is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set CONFIG_S3C2410_RTC=y @@ -636,6 +690,7 @@ CONFIG_S3C2410_RTC=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -653,6 +708,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # +# CONFIG_I2C_ELEKTOR is not set CONFIG_I2C_ISA=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -671,6 +727,7 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -737,22 +794,28 @@ CONFIG_SENSORS_LM85=m # Graphics support # CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S3C2410=y +# CONFIG_FB_S3C2410_DEBUG is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y # # Logo configuration @@ -773,6 +836,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -798,10 +865,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -810,6 +873,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -854,6 +918,7 @@ CONFIG_JFFS_FS_VERBOSE=0 CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -884,6 +949,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -959,7 +1025,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -970,7 +1036,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set @@ -998,6 +1066,7 @@ CONFIG_DEBUG_S3C2410_UART=0 # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c index b0bbd1e62ebb..a2843be05557 100644 --- a/arch/arm/kernel/apm.c +++ b/arch/arm/kernel/apm.c @@ -20,6 +20,7 @@ #include <linux/apm_bios.h> #include <linux/sched.h> #include <linux/pm.h> +#include <linux/pm_legacy.h> #include <linux/device.h> #include <linux/kernel.h> #include <linux/list.h> diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 7b17a87a3311..7a3261f0bf79 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -9,6 +9,7 @@ */ #include <linux/module.h> #include <linux/string.h> +#include <linux/cryptohash.h> #include <linux/delay.h> #include <linux/in6.h> #include <linux/syscalls.h> @@ -126,6 +127,9 @@ EXPORT_SYMBOL(__put_user_2); EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); + /* crypto hash */ +EXPORT_SYMBOL(sha_transform); + /* gcc lib functions */ EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a511ec5b11a3..d9fb819bf7cc 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -47,6 +47,13 @@ movne r0, sp adrne lr, 1b bne do_IPI + +#ifdef CONFIG_LOCAL_TIMERS + test_for_ltirq r0, r6, r5, lr + movne r0, sp + adrne lr, 1b + bne do_local_timer +#endif #endif .endm diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 9def4404e1f2..d7099dbbb879 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -264,6 +264,7 @@ unlock: #endif #ifdef CONFIG_SMP show_ipi_list(p); + show_local_irqs(p); #endif seq_printf(p, "Err: %10lu\n", irq_err_count); } @@ -995,7 +996,7 @@ void __init init_irq_proc(void) struct proc_dir_entry *dir; int irq; - dir = proc_mkdir("irq", 0); + dir = proc_mkdir("irq", NULL); if (!dir) return; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index ba298277becd..30494aab829a 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -86,12 +86,16 @@ EXPORT_SYMBOL(pm_power_off); */ void default_idle(void) { - local_irq_disable(); - if (!need_resched() && !hlt_counter) { - timer_dyn_reprogram(); - arch_idle(); + if (hlt_counter) + cpu_relax(); + else { + local_irq_disable(); + if (!need_resched()) { + timer_dyn_reprogram(); + arch_idle(); + } + local_irq_enable(); } - local_irq_enable(); } /* @@ -116,13 +120,13 @@ void cpu_idle(void) if (!idle) idle = default_idle; - preempt_disable(); leds_event(led_idle_start); while (!need_resched()) idle(); leds_event(led_idle_end); - preempt_enable(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -355,7 +359,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long stack_start, struct thread_info *thread = p->thread_info; struct pt_regs *childregs; - childregs = ((struct pt_regs *)((unsigned long)thread + THREAD_START_SP)) - 1; + childregs = (void *)thread + THREAD_START_SP - sizeof(*regs); *childregs = *regs; childregs->ARM_r0 = 0; childregs->ARM_sp = stack_start; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 9bd8609a2926..9a340e790da5 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -648,7 +648,7 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp) #endif -static int do_ptrace(int request, struct task_struct *child, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { unsigned long tmp; int ret; @@ -782,53 +782,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat return ret; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) -{ - struct task_struct *child; - int ret; - - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret == 0) - ret = do_ptrace(request, child, addr, data); - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - return ret; -} - asmlinkage void syscall_trace(int why, struct pt_regs *regs) { unsigned long ip; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index edb5a406922f..373c0959bc2f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -142,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu) ret = -EIO; } - secondary_data.stack = 0; + secondary_data.stack = NULL; secondary_data.pgdir = 0; *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0); @@ -185,6 +185,11 @@ int __cpuexit __cpu_disable(void) migrate_irqs(); /* + * Stop the local timer for this CPU. + */ + local_timer_stop(cpu); + + /* * Flush user cache and TLB mappings, and then remove this CPU * from the vm mask set of all processes. */ @@ -268,6 +273,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) local_flush_tlb_all(); cpu_init(); + preempt_disable(); /* * Give the platform a chance to do its own initialisation. @@ -290,6 +296,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void) cpu_set(cpu, cpu_online_map); /* + * Setup local timer for this CPU. + */ + local_timer_setup(cpu); + + /* * OK, it's off to the idle thread for us */ cpu_idle(); @@ -359,8 +370,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) * You must not call this function with disabled interrupts, from a * hardware interrupt handler, nor from a bottom half handler. */ -int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry, - int wait, cpumask_t callmap) +static int smp_call_function_on_cpu(void (*func)(void *info), void *info, + int retry, int wait, cpumask_t callmap) { struct smp_call_struct data; unsigned long timeout; @@ -454,6 +465,18 @@ void show_ipi_list(struct seq_file *p) seq_putc(p, '\n'); } +void show_local_irqs(struct seq_file *p) +{ + unsigned int cpu; + + seq_printf(p, "LOC: "); + + for_each_present_cpu(cpu) + seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs); + + seq_putc(p, '\n'); +} + static void ipi_timer(struct pt_regs *regs) { int user = user_mode(regs); @@ -464,6 +487,18 @@ static void ipi_timer(struct pt_regs *regs) irq_exit(); } +#ifdef CONFIG_LOCAL_TIMERS +asmlinkage void do_local_timer(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + if (local_timer_ack()) { + irq_stat[cpu].local_timer_irqs++; + ipi_timer(regs); + } +} +#endif + /* * ipi_call_function - handle IPI from smp_call_function() * @@ -515,7 +550,7 @@ static void ipi_cpu_stop(unsigned int cpu) * * Bit 0 - Inter-processor function call */ -void do_IPI(struct pt_regs *regs) +asmlinkage void do_IPI(struct pt_regs *regs) { unsigned int cpu = smp_processor_id(); struct ipi_data *ipi = &per_cpu(ipi_data, cpu); diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index f35d91fbe117..b8c14e936697 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -34,7 +34,7 @@ and r2, r0, #7 mov r3, #1 mov r3, r3, lsl r2 - save_and_disable_irqs ip, r2 + save_and_disable_irqs ip ldrb r2, [r1, r0, lsr #3] \instr r2, r2, r3 strb r2, [r1, r0, lsr #3] @@ -54,7 +54,7 @@ add r1, r1, r0, lsr #3 and r3, r0, #7 mov r0, #1 - save_and_disable_irqs ip, r2 + save_and_disable_irqs ip ldrb r2, [r1] tst r2, r0, lsl r3 \instr r2, r2, r0, lsl r3 diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index cb5e3708f118..a78dae5a7b28 100644 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -26,7 +26,7 @@ td1 .req r4 @ save before use td2 .req r5 @ save before use td3 .req lr -.zero: mov r0, sum +.Lzero: mov r0, sum add sp, sp, #4 ldr pc, [sp], #4 @@ -34,21 +34,22 @@ td3 .req lr * Handle 0 to 7 bytes, with any alignment of source and * destination pointers. Note that when we get here, C = 0 */ -.less8: teq len, #0 @ check for zero count - beq .zero +.Lless8: teq len, #0 @ check for zero count + beq .Lzero /* we must have at least one byte. */ tst buf, #1 @ odd address? + movne sum, sum, ror #8 ldrneb td0, [buf], #1 subne len, len, #1 adcnes sum, sum, td0, put_byte_1 -.less4: tst len, #6 - beq .less8_byte +.Lless4: tst len, #6 + beq .Lless8_byte /* we are now half-word aligned */ -.less8_wordlp: +.Lless8_wordlp: #if __LINUX_ARM_ARCH__ >= 4 ldrh td0, [buf], #2 sub len, len, #2 @@ -64,19 +65,19 @@ td3 .req lr #endif adcs sum, sum, td0 tst len, #6 - bne .less8_wordlp + bne .Lless8_wordlp -.less8_byte: tst len, #1 @ odd number of bytes +.Lless8_byte: tst len, #1 @ odd number of bytes ldrneb td0, [buf], #1 @ include last byte adcnes sum, sum, td0, put_byte_0 @ update checksum -.done: adc r0, sum, #0 @ collect up the last carry +.Ldone: adc r0, sum, #0 @ collect up the last carry ldr td0, [sp], #4 tst td0, #1 @ check buffer alignment movne r0, r0, ror #8 @ rotate checksum by 8 bits ldr pc, [sp], #4 @ return -.not_aligned: tst buf, #1 @ odd address +.Lnot_aligned: tst buf, #1 @ odd address ldrneb td0, [buf], #1 @ make even subne len, len, #1 adcnes sum, sum, td0, put_byte_1 @ update checksum @@ -101,11 +102,14 @@ td3 .req lr ENTRY(csum_partial) stmfd sp!, {buf, lr} cmp len, #8 @ Ensure that we have at least - blo .less8 @ 8 bytes to copy. + blo .Lless8 @ 8 bytes to copy. + + tst buf, #1 + movne sum, sum, ror #8 adds sum, sum, #0 @ C = 0 tst buf, #3 @ Test destination alignment - blne .not_aligned @ aligh destination, return here + blne .Lnot_aligned @ align destination, return here 1: bics ip, len, #31 beq 3f @@ -127,11 +131,11 @@ ENTRY(csum_partial) ldmfd sp!, {r4 - r5} 3: tst len, #0x1c @ should not change C - beq .less4 + beq .Lless4 4: ldr td0, [buf], #4 sub len, len, #4 adcs sum, sum, td0 tst len, #0x1c bne 4b - b .less4 + b .Lless4 diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S index d3a2f4667db4..4a4609c19095 100644 --- a/arch/arm/lib/csumpartialcopygeneric.S +++ b/arch/arm/lib/csumpartialcopygeneric.S @@ -22,7 +22,7 @@ dst .req r1 len .req r2 sum .req r3 -.zero: mov r0, sum +.Lzero: mov r0, sum load_regs ea /* @@ -31,8 +31,9 @@ sum .req r3 * the length. Note that the source pointer hasn't been * aligned yet. */ -.dst_unaligned: tst dst, #1 - beq .dst_16bit +.Ldst_unaligned: + tst dst, #1 + beq .Ldst_16bit load1b ip sub len, len, #1 @@ -41,7 +42,7 @@ sum .req r3 tst dst, #2 moveq pc, lr @ dst is now 32bit aligned -.dst_16bit: load2b r8, ip +.Ldst_16bit: load2b r8, ip sub len, len, #2 adcs sum, sum, r8, put_byte_0 strb r8, [dst], #1 @@ -53,12 +54,12 @@ sum .req r3 * Handle 0 to 7 bytes, with any alignment of source and * destination pointers. Note that when we get here, C = 0 */ -.less8: teq len, #0 @ check for zero count - beq .zero +.Lless8: teq len, #0 @ check for zero count + beq .Lzero /* we must have at least one byte. */ tst dst, #1 @ dst 16-bit aligned - beq .less8_aligned + beq .Lless8_aligned /* Align dst */ load1b ip @@ -66,7 +67,7 @@ sum .req r3 adcs sum, sum, ip, put_byte_1 @ update checksum strb ip, [dst], #1 tst len, #6 - beq .less8_byteonly + beq .Lless8_byteonly 1: load2b r8, ip sub len, len, #2 @@ -74,15 +75,16 @@ sum .req r3 strb r8, [dst], #1 adcs sum, sum, ip, put_byte_1 strb ip, [dst], #1 -.less8_aligned: tst len, #6 +.Lless8_aligned: + tst len, #6 bne 1b -.less8_byteonly: +.Lless8_byteonly: tst len, #1 - beq .done + beq .Ldone load1b r8 adcs sum, sum, r8, put_byte_0 @ update checksum strb r8, [dst], #1 - b .done + b .Ldone FN_ENTRY mov ip, sp @@ -90,11 +92,11 @@ FN_ENTRY sub fp, ip, #4 cmp len, #8 @ Ensure that we have at least - blo .less8 @ 8 bytes to copy. + blo .Lless8 @ 8 bytes to copy. adds sum, sum, #0 @ C = 0 tst dst, #3 @ Test destination alignment - blne .dst_unaligned @ align destination, return here + blne .Ldst_unaligned @ align destination, return here /* * Ok, the dst pointer is now 32bit aligned, and we know @@ -103,7 +105,7 @@ FN_ENTRY */ tst src, #3 @ Test source alignment - bne .src_not_aligned + bne .Lsrc_not_aligned /* Routine for src & dst aligned */ @@ -136,17 +138,17 @@ FN_ENTRY adcs sum, sum, r4 4: ands len, len, #3 - beq .done + beq .Ldone load1l r4 tst len, #2 mov r5, r4, get_byte_0 - beq .exit + beq .Lexit adcs sum, sum, r4, push #16 strb r5, [dst], #1 mov r5, r4, get_byte_1 strb r5, [dst], #1 mov r5, r4, get_byte_2 -.exit: tst len, #1 +.Lexit: tst len, #1 strneb r5, [dst], #1 andne r5, r5, #255 adcnes sum, sum, r5, put_byte_0 @@ -157,20 +159,20 @@ FN_ENTRY * the inefficient byte manipulations in the * architecture independent code. */ -.done: adc r0, sum, #0 +.Ldone: adc r0, sum, #0 ldr sum, [sp, #0] @ dst tst sum, #1 movne r0, r0, ror #8 load_regs ea -.src_not_aligned: +.Lsrc_not_aligned: adc sum, sum, #0 @ include C from dst alignment and ip, src, #3 bic src, src, #3 load1l r5 cmp ip, #2 - beq .src2_aligned - bhi .src3_aligned + beq .Lsrc2_aligned + bhi .Lsrc3_aligned mov r4, r5, pull #8 @ C = 0 bics ip, len, #15 beq 2f @@ -211,18 +213,18 @@ FN_ENTRY adcs sum, sum, r4 mov r4, r5, pull #8 4: ands len, len, #3 - beq .done + beq .Ldone mov r5, r4, get_byte_0 tst len, #2 - beq .exit + beq .Lexit adcs sum, sum, r4, push #16 strb r5, [dst], #1 mov r5, r4, get_byte_1 strb r5, [dst], #1 mov r5, r4, get_byte_2 - b .exit + b .Lexit -.src2_aligned: mov r4, r5, pull #16 +.Lsrc2_aligned: mov r4, r5, pull #16 adds sum, sum, #0 bics ip, len, #15 beq 2f @@ -263,20 +265,20 @@ FN_ENTRY adcs sum, sum, r4 mov r4, r5, pull #16 4: ands len, len, #3 - beq .done + beq .Ldone mov r5, r4, get_byte_0 tst len, #2 - beq .exit + beq .Lexit adcs sum, sum, r4 strb r5, [dst], #1 mov r5, r4, get_byte_1 strb r5, [dst], #1 tst len, #1 - beq .done + beq .Ldone load1b r5 - b .exit + b .Lexit -.src3_aligned: mov r4, r5, pull #24 +.Lsrc3_aligned: mov r4, r5, pull #24 adds sum, sum, #0 bics ip, len, #15 beq 2f @@ -317,10 +319,10 @@ FN_ENTRY adcs sum, sum, r4 mov r4, r5, pull #24 4: ands len, len, #3 - beq .done + beq .Ldone mov r5, r4, get_byte_0 tst len, #2 - beq .exit + beq .Lexit strb r5, [dst], #1 adcs sum, sum, r4 load1l r4 @@ -328,4 +330,4 @@ FN_ENTRY strb r5, [dst], #1 adcs sum, sum, r4, push #24 mov r5, r4, get_byte_1 - b .exit + b .Lexit diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S index 3c7f7e675dd8..b3fb475b4120 100644 --- a/arch/arm/lib/delay.S +++ b/arch/arm/lib/delay.S @@ -11,7 +11,7 @@ #include <asm/assembler.h> .text -LC0: .word loops_per_jiffy +.LC0: .word loops_per_jiffy /* * 0 <= r0 <= 2000 @@ -21,7 +21,7 @@ ENTRY(__udelay) orr r2, r2, #0x00db mul r0, r2, r0 ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff - ldr r2, LC0 + ldr r2, .LC0 ldr r2, [r2] @ max = 0x0fffffff mov r0, r0, lsr #11 @ max = 0x00003fff mov r2, r2, lsr #11 @ max = 0x0003ffff diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index f055d56ea68a..6f8e27a58c78 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -27,7 +27,7 @@ ENTRY(_find_first_zero_bit_le) mov r2, #0 1: ldrb r3, [r0, r2, lsr #3] eors r3, r3, #0xff @ invert bits - bne .found @ any now set - found zero bit + bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer 2: cmp r2, r1 @ any more? blo 1b @@ -46,7 +46,7 @@ ENTRY(_find_next_zero_bit_le) ldrb r3, [r0, r2, lsr #3] eor r3, r3, #0xff @ now looking for a 1 bit movs r3, r3, lsr ip @ shift off unused bits - bne .found + bne .L_found orr r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit @@ -61,7 +61,7 @@ ENTRY(_find_first_bit_le) mov r2, #0 1: ldrb r3, [r0, r2, lsr #3] movs r3, r3 - bne .found @ any now set - found zero bit + bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer 2: cmp r2, r1 @ any more? blo 1b @@ -79,7 +79,7 @@ ENTRY(_find_next_bit_le) beq 1b @ If new byte, goto old routine ldrb r3, [r0, r2, lsr #3] movs r3, r3, lsr ip @ shift off unused bits - bne .found + bne .L_found orr r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit @@ -93,7 +93,7 @@ ENTRY(_find_first_zero_bit_be) 1: eor r3, r2, #0x18 @ big endian byte ordering ldrb r3, [r0, r3, lsr #3] eors r3, r3, #0xff @ invert bits - bne .found @ any now set - found zero bit + bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer 2: cmp r2, r1 @ any more? blo 1b @@ -109,7 +109,7 @@ ENTRY(_find_next_zero_bit_be) ldrb r3, [r0, r3, lsr #3] eor r3, r3, #0xff @ now looking for a 1 bit movs r3, r3, lsr ip @ shift off unused bits - bne .found + bne .L_found orr r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit @@ -121,7 +121,7 @@ ENTRY(_find_first_bit_be) 1: eor r3, r2, #0x18 @ big endian byte ordering ldrb r3, [r0, r3, lsr #3] movs r3, r3 - bne .found @ any now set - found zero bit + bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer 2: cmp r2, r1 @ any more? blo 1b @@ -136,7 +136,7 @@ ENTRY(_find_next_bit_be) eor r3, r2, #0x18 @ big endian byte ordering ldrb r3, [r0, r3, lsr #3] movs r3, r3, lsr ip @ shift off unused bits - bne .found + bne .L_found orr r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit @@ -146,7 +146,7 @@ ENTRY(_find_next_bit_be) /* * One or more bits in the LSB of r3 are assumed to be set. */ -.found: +.L_found: #if __LINUX_ARM_ARCH__ >= 5 rsb r1, r3, #0 and r3, r3, r1 diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S index 3aacd01d40e1..b153523631c3 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/lib/io-acorn.S @@ -17,7 +17,7 @@ .text .align -.iosl_warning: +.Liosl_warning: .ascii "<4>insl/outsl not implemented, called from %08lX\0" .align @@ -27,6 +27,6 @@ */ ENTRY(insl) ENTRY(outsl) - adr r0, .iosl_warning + adr r0, .Liosl_warning mov r1, lr b printk diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S index 081ef749298a..d3d8de71a2c8 100644 --- a/arch/arm/lib/io-readsb.S +++ b/arch/arm/lib/io-readsb.S @@ -10,7 +10,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -.insb_align: rsb ip, ip, #4 +.Linsb_align: rsb ip, ip, #4 cmp ip, r2 movgt ip, r2 cmp ip, #2 @@ -21,20 +21,20 @@ ldrgtb r3, [r0] strgtb r3, [r1], #1 subs r2, r2, ip - bne .insb_aligned + bne .Linsb_aligned ENTRY(__raw_readsb) teq r2, #0 @ do we have to check for the zero len? moveq pc, lr ands ip, r1, #3 - bne .insb_align + bne .Linsb_align -.insb_aligned: stmfd sp!, {r4 - r6, lr} +.Linsb_aligned: stmfd sp!, {r4 - r6, lr} subs r2, r2, #16 - bmi .insb_no_16 + bmi .Linsb_no_16 -.insb_16_lp: ldrb r3, [r0] +.Linsb_16_lp: ldrb r3, [r0] ldrb r4, [r0] ldrb r5, [r0] mov r3, r3, put_byte_0 @@ -69,13 +69,13 @@ ENTRY(__raw_readsb) stmia r1!, {r3 - r6} subs r2, r2, #16 - bpl .insb_16_lp + bpl .Linsb_16_lp tst r2, #15 LOADREGS(eqfd, sp!, {r4 - r6, pc}) -.insb_no_16: tst r2, #8 - beq .insb_no_8 +.Linsb_no_16: tst r2, #8 + beq .Linsb_no_8 ldrb r3, [r0] ldrb r4, [r0] @@ -95,8 +95,8 @@ ENTRY(__raw_readsb) orr r4, r4, ip, put_byte_3 stmia r1!, {r3, r4} -.insb_no_8: tst r2, #4 - beq .insb_no_4 +.Linsb_no_8: tst r2, #4 + beq .Linsb_no_4 ldrb r3, [r0] ldrb r4, [r0] @@ -108,7 +108,7 @@ ENTRY(__raw_readsb) orr r3, r3, r6, put_byte_3 str r3, [r1], #4 -.insb_no_4: ands r2, r2, #3 +.Linsb_no_4: ands r2, r2, #3 LOADREGS(eqfd, sp!, {r4 - r6, pc}) cmp r2, #2 diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 476cf7f8a633..146d47c15455 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -11,16 +11,16 @@ #include <asm/assembler.h> #include <asm/hardware.h> -.insw_bad_alignment: - adr r0, .insw_bad_align_msg +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg mov r2, lr b panic -.insw_bad_align_msg: +.Linsw_bad_align_msg: .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" .align -.insw_align: tst r1, #1 - bne .insw_bad_alignment +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment ldr r3, [r0] strb r3, [r1], #1 @@ -34,16 +34,16 @@ ENTRY(__raw_readsw) teq r2, #0 @ do we have to check for the zero len? moveq pc, lr tst r1, #3 - bne .insw_align + bne .Linsw_align -.insw_aligned: mov ip, #0xff +.Linsw_aligned: mov ip, #0xff orr ip, ip, ip, lsl #8 stmfd sp!, {r4, r5, r6, lr} subs r2, r2, #8 - bmi .no_insw_8 + bmi .Lno_insw_8 -.insw_8_lp: ldr r3, [r0] +.Linsw_8_lp: ldr r3, [r0] and r3, r3, ip ldr r4, [r0] orr r3, r3, r4, lsl #16 @@ -66,13 +66,13 @@ ENTRY(__raw_readsw) stmia r1!, {r3 - r6} subs r2, r2, #8 - bpl .insw_8_lp + bpl .Linsw_8_lp tst r2, #7 LOADREGS(eqfd, sp!, {r4, r5, r6, pc}) -.no_insw_8: tst r2, #4 - beq .no_insw_4 +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 ldr r3, [r0] and r3, r3, ip @@ -86,8 +86,8 @@ ENTRY(__raw_readsw) stmia r1!, {r3, r4} -.no_insw_4: tst r2, #2 - beq .no_insw_2 +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 ldr r3, [r0] and r3, r3, ip @@ -96,7 +96,7 @@ ENTRY(__raw_readsw) str r3, [r1], #4 -.no_insw_2: tst r2, #1 +.Lno_insw_2: tst r2, #1 ldrne r3, [r0] strneb r3, [r1], #1 movne r3, r3, lsr #8 diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S index c92b66ecbe86..4db1c5f0b219 100644 --- a/arch/arm/lib/io-readsw-armv4.S +++ b/arch/arm/lib/io-readsw-armv4.S @@ -18,8 +18,8 @@ #endif .endm -.insw_align: movs ip, r1, lsl #31 - bne .insw_noalign +.Linsw_align: movs ip, r1, lsl #31 + bne .Linsw_noalign ldrh ip, [r0] sub r2, r2, #1 strh ip, [r1], #2 @@ -28,14 +28,14 @@ ENTRY(__raw_readsw) teq r2, #0 moveq pc, lr tst r1, #3 - bne .insw_align + bne .Linsw_align stmfd sp!, {r4, r5, lr} subs r2, r2, #8 - bmi .no_insw_8 + bmi .Lno_insw_8 -.insw_8_lp: ldrh r3, [r0] +.Linsw_8_lp: ldrh r3, [r0] ldrh r4, [r0] pack r3, r3, r4 @@ -53,10 +53,10 @@ ENTRY(__raw_readsw) subs r2, r2, #8 stmia r1!, {r3 - r5, ip} - bpl .insw_8_lp + bpl .Linsw_8_lp -.no_insw_8: tst r2, #4 - beq .no_insw_4 +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 ldrh r3, [r0] ldrh r4, [r0] @@ -68,15 +68,15 @@ ENTRY(__raw_readsw) stmia r1!, {r3, r4} -.no_insw_4: movs r2, r2, lsl #31 - bcc .no_insw_2 +.Lno_insw_4: movs r2, r2, lsl #31 + bcc .Lno_insw_2 ldrh r3, [r0] ldrh ip, [r0] pack r3, r3, ip str r3, [r1], #4 -.no_insw_2: ldrneh r3, [r0] +.Lno_insw_2: ldrneh r3, [r0] strneh r3, [r1] ldmfd sp!, {r4, r5, pc} @@ -93,7 +93,7 @@ ENTRY(__raw_readsw) #define pull_hbyte1 lsr #8 #endif -.insw_noalign: stmfd sp!, {r4, lr} +.Linsw_noalign: stmfd sp!, {r4, lr} ldrccb ip, [r1, #-1]! bcc 1f diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S index 70b2561bdb09..08209fc640ea 100644 --- a/arch/arm/lib/io-writesb.S +++ b/arch/arm/lib/io-writesb.S @@ -30,7 +30,7 @@ #endif .endm -.outsb_align: rsb ip, ip, #4 +.Loutsb_align: rsb ip, ip, #4 cmp ip, r2 movgt ip, r2 cmp ip, #2 @@ -41,44 +41,45 @@ ldrgtb r3, [r1], #1 strgtb r3, [r0] subs r2, r2, ip - bne .outsb_aligned + bne .Loutsb_aligned ENTRY(__raw_writesb) teq r2, #0 @ do we have to check for the zero len? moveq pc, lr ands ip, r1, #3 - bne .outsb_align + bne .Loutsb_align -.outsb_aligned: stmfd sp!, {r4, r5, lr} +.Loutsb_aligned: + stmfd sp!, {r4, r5, lr} subs r2, r2, #16 - bmi .outsb_no_16 + bmi .Loutsb_no_16 -.outsb_16_lp: ldmia r1!, {r3, r4, r5, ip} +.Loutsb_16_lp: ldmia r1!, {r3, r4, r5, ip} outword r3 outword r4 outword r5 outword ip subs r2, r2, #16 - bpl .outsb_16_lp + bpl .Loutsb_16_lp tst r2, #15 LOADREGS(eqfd, sp!, {r4, r5, pc}) -.outsb_no_16: tst r2, #8 - beq .outsb_no_8 +.Loutsb_no_16: tst r2, #8 + beq .Loutsb_no_8 ldmia r1!, {r3, r4} outword r3 outword r4 -.outsb_no_8: tst r2, #4 - beq .outsb_no_4 +.Loutsb_no_8: tst r2, #4 + beq .Loutsb_no_4 ldr r3, [r1], #4 outword r3 -.outsb_no_4: ands r2, r2, #3 +.Loutsb_no_4: ands r2, r2, #3 LOADREGS(eqfd, sp!, {r4, r5, pc}) cmp r2, #2 diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 950e7e310f1a..52d62b481295 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -11,16 +11,16 @@ #include <asm/assembler.h> #include <asm/hardware.h> -.outsw_bad_alignment: - adr r0, .outsw_bad_align_msg +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg mov r2, lr b panic -.outsw_bad_align_msg: +.Loutsw_bad_align_msg: .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" .align -.outsw_align: tst r1, #1 - bne .outsw_bad_alignment +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment add r1, r1, #2 @@ -35,14 +35,14 @@ ENTRY(__raw_writesw) teq r2, #0 @ do we have to check for the zero len? moveq pc, lr tst r1, #3 - bne .outsw_align + bne .Loutsw_align -.outsw_aligned: stmfd sp!, {r4, r5, r6, lr} + stmfd sp!, {r4, r5, r6, lr} subs r2, r2, #8 - bmi .no_outsw_8 + bmi .Lno_outsw_8 -.outsw_8_lp: ldmia r1!, {r3, r4, r5, r6} +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} mov ip, r3, lsl #16 orr ip, ip, ip, lsr #16 @@ -77,13 +77,13 @@ ENTRY(__raw_writesw) str ip, [r0] subs r2, r2, #8 - bpl .outsw_8_lp + bpl .Loutsw_8_lp tst r2, #7 LOADREGS(eqfd, sp!, {r4, r5, r6, pc}) -.no_outsw_8: tst r2, #4 - beq .no_outsw_4 +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 ldmia r1!, {r3, r4} @@ -103,8 +103,8 @@ ENTRY(__raw_writesw) orr ip, ip, ip, lsl #16 str ip, [r0] -.no_outsw_4: tst r2, #2 - beq .no_outsw_2 +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 ldr r3, [r1], #4 @@ -116,7 +116,7 @@ ENTRY(__raw_writesw) orr ip, ip, ip, lsl #16 str ip, [r0] -.no_outsw_2: tst r2, #1 +.Lno_outsw_2: tst r2, #1 ldrne r3, [r1] diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index 5e240e452af6..c8e85bd653b7 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -22,8 +22,8 @@ #endif .endm -.outsw_align: movs ip, r1, lsl #31 - bne .outsw_noalign +.Loutsw_align: movs ip, r1, lsl #31 + bne .Loutsw_noalign ldrh r3, [r1], #2 sub r2, r2, #1 @@ -33,35 +33,35 @@ ENTRY(__raw_writesw) teq r2, #0 moveq pc, lr ands r3, r1, #3 - bne .outsw_align + bne .Loutsw_align stmfd sp!, {r4, r5, lr} subs r2, r2, #8 - bmi .no_outsw_8 + bmi .Lno_outsw_8 -.outsw_8_lp: ldmia r1!, {r3, r4, r5, ip} +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, ip} subs r2, r2, #8 outword r3 outword r4 outword r5 outword ip - bpl .outsw_8_lp + bpl .Loutsw_8_lp -.no_outsw_8: tst r2, #4 - beq .no_outsw_4 +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 ldmia r1!, {r3, ip} outword r3 outword ip -.no_outsw_4: movs r2, r2, lsl #31 - bcc .no_outsw_2 +.Lno_outsw_4: movs r2, r2, lsl #31 + bcc .Lno_outsw_2 ldr r3, [r1], #4 outword r3 -.no_outsw_2: ldrneh r3, [r1] +.Lno_outsw_2: ldrneh r3, [r1] strneh r3, [r0] ldmfd sp!, {r4, r5, pc} @@ -74,7 +74,8 @@ ENTRY(__raw_writesw) #define push_hbyte1 lsl #8 #endif -.outsw_noalign: ldr r3, [r1, -r3]! +.Loutsw_noalign: + ldr r3, [r1, -r3]! subcs r2, r2, #1 bcs 2f subs r2, r2, #2 diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index 6f1b5b49fe4c..0cc450f863b6 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -27,7 +27,7 @@ * Returns : Number of bytes NOT copied. */ -.c2u_dest_not_aligned: +.Lc2u_dest_not_aligned: rsb ip, ip, #4 cmp ip, #2 ldrb r3, [r1], #1 @@ -37,32 +37,32 @@ USER( strgebt r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 USER( strgtbt r3, [r0], #1) @ May fault sub r2, r2, ip - b .c2u_dest_aligned + b .Lc2u_dest_aligned ENTRY(__arch_copy_to_user) stmfd sp!, {r2, r4 - r7, lr} cmp r2, #4 - blt .c2u_not_enough + blt .Lc2u_not_enough ands ip, r0, #3 - bne .c2u_dest_not_aligned -.c2u_dest_aligned: + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: ands ip, r1, #3 - bne .c2u_src_not_aligned + bne .Lc2u_src_not_aligned /* * Seeing as there has to be at least 8 bytes to copy, we can * copy one word, and force a user-mode page fault... */ -.c2u_0fupi: subs r2, r2, #4 +.Lc2u_0fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .c2u_0nowords + bmi .Lc2u_0nowords ldr r3, [r1], #4 USER( strt r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .c2u_0fupi + beq .Lc2u_0fupi /* * ip = max no. of bytes to copy before needing another "strt" insn */ @@ -70,16 +70,16 @@ USER( strt r3, [r0], #4) @ May fault movlt ip, r2 sub r2, r2, ip subs ip, ip, #32 - blt .c2u_0rem8lp + blt .Lc2u_0rem8lp -.c2u_0cpy8lp: ldmia r1!, {r3 - r6} +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} stmia r0!, {r3 - r6} @ Shouldnt fault ldmia r1!, {r3 - r6} subs ip, ip, #32 stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .c2u_0cpy8lp + bpl .Lc2u_0cpy8lp -.c2u_0rem8lp: cmn ip, #16 +.Lc2u_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} stmgeia r0!, {r3 - r6} @ Shouldnt fault tst ip, #8 @@ -89,33 +89,33 @@ USER( strt r3, [r0], #4) @ May fault ldrne r3, [r1], #4 strnet r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 - beq .c2u_0fupi -.c2u_0nowords: teq ip, #0 - beq .c2u_finished -.c2u_nowords: cmp ip, #2 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 ldrb r3, [r1], #1 USER( strbt r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 USER( strgebt r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 USER( strgtbt r3, [r0], #1) @ May fault - b .c2u_finished + b .Lc2u_finished -.c2u_not_enough: +.Lc2u_not_enough: movs ip, r2 - bne .c2u_nowords -.c2u_finished: mov r0, #0 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 LOADREGS(fd,sp!,{r2, r4 - r7, pc}) -.c2u_src_not_aligned: +.Lc2u_src_not_aligned: bic r1, r1, #3 ldr r7, [r1], #4 cmp ip, #2 - bgt .c2u_3fupi - beq .c2u_2fupi -.c2u_1fupi: subs r2, r2, #4 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .c2u_1nowords + bmi .Lc2u_1nowords mov r3, r7, pull #8 ldr r7, [r1], #4 orr r3, r3, r7, push #24 @@ -123,14 +123,14 @@ USER( strt r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .c2u_1fupi + beq .Lc2u_1fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .c2u_1rem8lp + blt .Lc2u_1rem8lp -.c2u_1cpy8lp: mov r3, r7, pull #8 +.Lc2u_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -141,9 +141,9 @@ USER( strt r3, [r0], #4) @ May fault mov r6, r6, pull #8 orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .c2u_1cpy8lp + bpl .Lc2u_1cpy8lp -.c2u_1rem8lp: tst ip, #8 +.Lc2u_1rem8lp: tst ip, #8 movne r3, r7, pull #8 ldmneia r1!, {r4, r7} orrne r3, r3, r4, push #24 @@ -156,21 +156,21 @@ USER( strt r3, [r0], #4) @ May fault orrne r3, r3, r7, push #24 strnet r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 - beq .c2u_1fupi -.c2u_1nowords: mov r3, r7, get_byte_1 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 teq ip, #0 - beq .c2u_finished + beq .Lc2u_finished cmp ip, #2 USER( strbt r3, [r0], #1) @ May fault movge r3, r7, get_byte_2 USER( strgebt r3, [r0], #1) @ May fault movgt r3, r7, get_byte_3 USER( strgtbt r3, [r0], #1) @ May fault - b .c2u_finished + b .Lc2u_finished -.c2u_2fupi: subs r2, r2, #4 +.Lc2u_2fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .c2u_2nowords + bmi .Lc2u_2nowords mov r3, r7, pull #16 ldr r7, [r1], #4 orr r3, r3, r7, push #16 @@ -178,14 +178,14 @@ USER( strt r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .c2u_2fupi + beq .Lc2u_2fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .c2u_2rem8lp + blt .Lc2u_2rem8lp -.c2u_2cpy8lp: mov r3, r7, pull #16 +.Lc2u_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -196,9 +196,9 @@ USER( strt r3, [r0], #4) @ May fault mov r6, r6, pull #16 orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .c2u_2cpy8lp + bpl .Lc2u_2cpy8lp -.c2u_2rem8lp: tst ip, #8 +.Lc2u_2rem8lp: tst ip, #8 movne r3, r7, pull #16 ldmneia r1!, {r4, r7} orrne r3, r3, r4, push #16 @@ -211,21 +211,21 @@ USER( strt r3, [r0], #4) @ May fault orrne r3, r3, r7, push #16 strnet r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 - beq .c2u_2fupi -.c2u_2nowords: mov r3, r7, get_byte_2 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 teq ip, #0 - beq .c2u_finished + beq .Lc2u_finished cmp ip, #2 USER( strbt r3, [r0], #1) @ May fault movge r3, r7, get_byte_3 USER( strgebt r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 USER( strgtbt r3, [r0], #1) @ May fault - b .c2u_finished + b .Lc2u_finished -.c2u_3fupi: subs r2, r2, #4 +.Lc2u_3fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .c2u_3nowords + bmi .Lc2u_3nowords mov r3, r7, pull #24 ldr r7, [r1], #4 orr r3, r3, r7, push #8 @@ -233,14 +233,14 @@ USER( strt r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .c2u_3fupi + beq .Lc2u_3fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .c2u_3rem8lp + blt .Lc2u_3rem8lp -.c2u_3cpy8lp: mov r3, r7, pull #24 +.Lc2u_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #8 @@ -251,9 +251,9 @@ USER( strt r3, [r0], #4) @ May fault mov r6, r6, pull #24 orr r6, r6, r7, push #8 stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .c2u_3cpy8lp + bpl .Lc2u_3cpy8lp -.c2u_3rem8lp: tst ip, #8 +.Lc2u_3rem8lp: tst ip, #8 movne r3, r7, pull #24 ldmneia r1!, {r4, r7} orrne r3, r3, r4, push #8 @@ -266,17 +266,17 @@ USER( strt r3, [r0], #4) @ May fault orrne r3, r3, r7, push #8 strnet r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 - beq .c2u_3fupi -.c2u_3nowords: mov r3, r7, get_byte_3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 teq ip, #0 - beq .c2u_finished + beq .Lc2u_finished cmp ip, #2 USER( strbt r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 USER( strgebt r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 USER( strgtbt r3, [r0], #1) @ May fault - b .c2u_finished + b .Lc2u_finished .section .fixup,"ax" .align 0 @@ -290,7 +290,7 @@ USER( strgtbt r3, [r0], #1) @ May fault * : n - number of bytes to copy * Returns : Number of bytes NOT copied. */ -.cfu_dest_not_aligned: +.Lcfu_dest_not_aligned: rsb ip, ip, #4 cmp ip, #2 USER( ldrbt r3, [r1], #1) @ May fault @@ -300,31 +300,32 @@ USER( ldrgebt r3, [r1], #1) @ May fault USER( ldrgtbt r3, [r1], #1) @ May fault strgtb r3, [r0], #1 sub r2, r2, ip - b .cfu_dest_aligned + b .Lcfu_dest_aligned ENTRY(__arch_copy_from_user) stmfd sp!, {r0, r2, r4 - r7, lr} cmp r2, #4 - blt .cfu_not_enough + blt .Lcfu_not_enough ands ip, r0, #3 - bne .cfu_dest_not_aligned -.cfu_dest_aligned: + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: ands ip, r1, #3 - bne .cfu_src_not_aligned + bne .Lcfu_src_not_aligned + /* * Seeing as there has to be at least 8 bytes to copy, we can * copy one word, and force a user-mode page fault... */ -.cfu_0fupi: subs r2, r2, #4 +.Lcfu_0fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .cfu_0nowords + bmi .Lcfu_0nowords USER( ldrt r3, [r1], #4) str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .cfu_0fupi + beq .Lcfu_0fupi /* * ip = max no. of bytes to copy before needing another "strt" insn */ @@ -332,16 +333,16 @@ USER( ldrt r3, [r1], #4) movlt ip, r2 sub r2, r2, ip subs ip, ip, #32 - blt .cfu_0rem8lp + blt .Lcfu_0rem8lp -.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault stmia r0!, {r3 - r6} ldmia r1!, {r3 - r6} @ Shouldnt fault subs ip, ip, #32 stmia r0!, {r3 - r6} - bpl .cfu_0cpy8lp + bpl .Lcfu_0cpy8lp -.cfu_0rem8lp: cmn ip, #16 +.Lcfu_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} @ Shouldnt fault stmgeia r0!, {r3 - r6} tst ip, #8 @@ -351,34 +352,34 @@ USER( ldrt r3, [r1], #4) ldrnet r3, [r1], #4 @ Shouldnt fault strne r3, [r0], #4 ands ip, ip, #3 - beq .cfu_0fupi -.cfu_0nowords: teq ip, #0 - beq .cfu_finished -.cfu_nowords: cmp ip, #2 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 USER( ldrbt r3, [r1], #1) @ May fault strb r3, [r0], #1 USER( ldrgebt r3, [r1], #1) @ May fault strgeb r3, [r0], #1 USER( ldrgtbt r3, [r1], #1) @ May fault strgtb r3, [r0], #1 - b .cfu_finished + b .Lcfu_finished -.cfu_not_enough: +.Lcfu_not_enough: movs ip, r2 - bne .cfu_nowords -.cfu_finished: mov r0, #0 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 add sp, sp, #8 LOADREGS(fd,sp!,{r4 - r7, pc}) -.cfu_src_not_aligned: +.Lcfu_src_not_aligned: bic r1, r1, #3 USER( ldrt r7, [r1], #4) @ May fault cmp ip, #2 - bgt .cfu_3fupi - beq .cfu_2fupi -.cfu_1fupi: subs r2, r2, #4 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .cfu_1nowords + bmi .Lcfu_1nowords mov r3, r7, pull #8 USER( ldrt r7, [r1], #4) @ May fault orr r3, r3, r7, push #24 @@ -386,14 +387,14 @@ USER( ldrt r7, [r1], #4) @ May fault mov ip, r1, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .cfu_1fupi + beq .Lcfu_1fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .cfu_1rem8lp + blt .Lcfu_1rem8lp -.cfu_1cpy8lp: mov r3, r7, pull #8 +.Lcfu_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -404,9 +405,9 @@ USER( ldrt r7, [r1], #4) @ May fault mov r6, r6, pull #8 orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} - bpl .cfu_1cpy8lp + bpl .Lcfu_1cpy8lp -.cfu_1rem8lp: tst ip, #8 +.Lcfu_1rem8lp: tst ip, #8 movne r3, r7, pull #8 ldmneia r1!, {r4, r7} @ Shouldnt fault orrne r3, r3, r4, push #24 @@ -419,21 +420,21 @@ USER( ldrnet r7, [r1], #4) @ May fault orrne r3, r3, r7, push #24 strne r3, [r0], #4 ands ip, ip, #3 - beq .cfu_1fupi -.cfu_1nowords: mov r3, r7, get_byte_1 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 teq ip, #0 - beq .cfu_finished + beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 movge r3, r7, get_byte_2 strgeb r3, [r0], #1 movgt r3, r7, get_byte_3 strgtb r3, [r0], #1 - b .cfu_finished + b .Lcfu_finished -.cfu_2fupi: subs r2, r2, #4 +.Lcfu_2fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .cfu_2nowords + bmi .Lcfu_2nowords mov r3, r7, pull #16 USER( ldrt r7, [r1], #4) @ May fault orr r3, r3, r7, push #16 @@ -441,14 +442,15 @@ USER( ldrt r7, [r1], #4) @ May fault mov ip, r1, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .cfu_2fupi + beq .Lcfu_2fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .cfu_2rem8lp + blt .Lcfu_2rem8lp + -.cfu_2cpy8lp: mov r3, r7, pull #16 +.Lcfu_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -459,9 +461,9 @@ USER( ldrt r7, [r1], #4) @ May fault mov r6, r6, pull #16 orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} - bpl .cfu_2cpy8lp + bpl .Lcfu_2cpy8lp -.cfu_2rem8lp: tst ip, #8 +.Lcfu_2rem8lp: tst ip, #8 movne r3, r7, pull #16 ldmneia r1!, {r4, r7} @ Shouldnt fault orrne r3, r3, r4, push #16 @@ -474,21 +476,21 @@ USER( ldrnet r7, [r1], #4) @ May fault orrne r3, r3, r7, push #16 strne r3, [r0], #4 ands ip, ip, #3 - beq .cfu_2fupi -.cfu_2nowords: mov r3, r7, get_byte_2 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 teq ip, #0 - beq .cfu_finished + beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 movge r3, r7, get_byte_3 strgeb r3, [r0], #1 USER( ldrgtbt r3, [r1], #0) @ May fault strgtb r3, [r0], #1 - b .cfu_finished + b .Lcfu_finished -.cfu_3fupi: subs r2, r2, #4 +.Lcfu_3fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .cfu_3nowords + bmi .Lcfu_3nowords mov r3, r7, pull #24 USER( ldrt r7, [r1], #4) @ May fault orr r3, r3, r7, push #8 @@ -496,14 +498,14 @@ USER( ldrt r7, [r1], #4) @ May fault mov ip, r1, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .cfu_3fupi + beq .Lcfu_3fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .cfu_3rem8lp + blt .Lcfu_3rem8lp -.cfu_3cpy8lp: mov r3, r7, pull #24 +.Lcfu_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} @ Shouldnt fault orr r3, r3, r4, push #8 mov r4, r4, pull #24 @@ -514,9 +516,9 @@ USER( ldrt r7, [r1], #4) @ May fault orr r6, r6, r7, push #8 stmia r0!, {r3 - r6} subs ip, ip, #16 - bpl .cfu_3cpy8lp + bpl .Lcfu_3cpy8lp -.cfu_3rem8lp: tst ip, #8 +.Lcfu_3rem8lp: tst ip, #8 movne r3, r7, pull #24 ldmneia r1!, {r4, r7} @ Shouldnt fault orrne r3, r3, r4, push #8 @@ -529,17 +531,17 @@ USER( ldrnet r7, [r1], #4) @ May fault orrne r3, r3, r7, push #8 strne r3, [r0], #4 ands ip, ip, #3 - beq .cfu_3fupi -.cfu_3nowords: mov r3, r7, get_byte_3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 teq ip, #0 - beq .cfu_finished + beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 USER( ldrgebt r3, [r1], #1) @ May fault strgeb r3, [r0], #1 USER( ldrgtbt r3, [r1], #1) @ May fault strgtb r3, [r0], #1 - b .cfu_finished + b .Lcfu_finished .section .fixup,"ax" .align 0 diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c index 99e019169dda..0340ddc4824e 100644 --- a/arch/arm/mach-aaec2000/clock.c +++ b/arch/arm/mach-aaec2000/clock.c @@ -14,6 +14,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> +#include <linux/string.h> #include <asm/semaphore.h> #include <asm/hardware/clock.h> diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c index e8832d0910ee..cfd0d2182d44 100644 --- a/arch/arm/mach-epxa10db/mm.c +++ b/arch/arm/mach-epxa10db/mm.c @@ -25,6 +25,7 @@ #include <asm/hardware.h> #include <asm/io.h> #include <asm/sizes.h> +#include <asm/page.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index dc09fd200c16..bbe6e4a0bf6a 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -132,14 +132,14 @@ void __init footbridge_init_irq(void) static struct map_desc fb_common_io_desc[] __initdata = { { .virtual = ARMCSR_BASE, - .pfn = DC21285_ARMCSR_BASE, + .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE), .length = ARMCSR_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = XBUS_BASE, .pfn = __phys_to_pfn(0x40000000), .length = XBUS_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, } }; @@ -153,28 +153,28 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .virtual = PCIMEM_BASE, .pfn = __phys_to_pfn(DC21285_PCI_MEM), .length = PCIMEM_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCICFG0_BASE, .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG), .length = PCICFG0_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCICFG1_BASE, .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG), .length = PCICFG1_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCIIACK_BASE, .pfn = __phys_to_pfn(DC21285_PCI_IACK), .length = PCIIACK_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCIO_BASE, .pfn = __phys_to_pfn(DC21285_PCI_IO), .length = PCIO_SIZE, - .type = MT_DEVICE - } + .type = MT_DEVICE, + }, #endif }; @@ -187,13 +187,13 @@ static struct map_desc co285_io_desc[] __initdata = { .virtual = PCIO_BASE, .pfn = __phys_to_pfn(DC21285_PCI_IO), .length = PCIO_SIZE, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = PCIMEM_BASE, .pfn = __phys_to_pfn(DC21285_PCI_MEM), .length = PCIMEM_SIZE, - .type = MT_DEVICE - } + .type = MT_DEVICE, + }, #endif }; diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a1b153d1626c..a4bafee77a06 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -420,8 +420,7 @@ static int impd1_probe(struct lm_device *dev) free_impd1: if (impd1 && impd1->base) iounmap(impd1->base); - if (impd1) - kfree(impd1); + kfree(impd1); release_lm: release_mem_region(dev->resource.start, SZ_4K); return ret; diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index df140962bb0f..6851abaf5524 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -84,63 +84,54 @@ static struct map_desc ixp2000_io_desc[] __initdata = { .virtual = IXP2000_CAP_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), .length = IXP2000_CAP_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_INTCTL_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), .length = IXP2000_INTCTL_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CREG_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), .length = IXP2000_PCI_CREG_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CSR_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), .length = IXP2000_PCI_CSR_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_MSF_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), .length = IXP2000_MSF_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), .length = IXP2000_PCI_IO_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CFG0_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), .length = IXP2000_PCI_CFG0_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CFG1_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), .length = IXP2000_PCI_CFG1_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, } }; void __init ixp2000_map_io(void) { - extern unsigned int processor_id; - /* - * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE for - * tweaking the PMDs so XCB=101. On IXP2800s we use the normal - * PMD flags. + * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE so that + * XCB=101 (to avoid triggering erratum #66), and given that + * this mode speeds up I/O accesses and we have write buffer + * flushes in the right places anyway, it doesn't hurt to use + * XCB=101 for all IXP2000s. */ - if ((processor_id & 0xfffffff0) == 0x69054190) { - int i; - - printk(KERN_INFO "Enabling IXP2400 erratum #66 workaround\n"); - - for(i=0;i<ARRAY_SIZE(ixp2000_io_desc);i++) - ixp2000_io_desc[i].type = MT_IXP2000_DEVICE; - } - iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); /* Set slowport to 8-bit mode. */ diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 89762a26495c..385285851cb5 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" +# This entry is placed on top because otherwise it would have +# been shown as a submenu. +config MACH_NSLU2 + bool + prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) + help + Say 'Y' here if you want your kernel to support Linksys's + NSLU2 NAS device. For more information on this platform, + see http://www.nslu2-linux.org + config ARCH_AVILA bool "Avila" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index ddecbda4a633..7a15629c18d0 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c new file mode 100644 index 000000000000..a575f2e0b2c8 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-pci.c + * + * NSLU2 board-level PCI initialization + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/config.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +void __init nslu2_pci_preinit(void) +{ + set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); + + gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); + gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); + gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); + + /* INTD is not configured as GPIO is used + * for the power input button. + */ + + ixp4xx_pci_preinit(); +} + +static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { + IRQ_NSLU2_PCI_INTA, + IRQ_NSLU2_PCI_INTB, + IRQ_NSLU2_PCI_INTC, + }; + + int irq = -1; + + if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && + pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { + irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; + } + + return irq; +} + +struct hw_pci __initdata nslu2_pci = { + .nr_controllers = 1, + .preinit = nslu2_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = nslu2_map_irq, +}; + +int __init nslu2_pci_init(void) /* monkey see, monkey do */ +{ + if (machine_is_nslu2()) + pci_common_init(&nslu2_pci); + + return 0; +} + +subsys_initcall(nslu2_pci_init); diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c new file mode 100644 index 000000000000..18fbc8c0fb30 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -0,0 +1,92 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-power.c + * + * NSLU2 Power/Reset driver + * + * Copyright (C) 2005 Tower Technologies + * + * based on nslu2-io.c + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo <a.zummo@towertech.it> + * Maintainers: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> + +#include <asm/mach-types.h> + +extern void ctrl_alt_del(void); + +static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* This is the paper-clip reset, it shuts the machine down directly. + */ + machine_power_off(); + + return IRQ_HANDLED; +} + +static int __init nslu2_power_init(void) +{ + if (!(machine_is_nslu2())) + return 0; + + *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ + + set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); + set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); + + gpio_line_isr_clear(NSLU2_RB_GPIO); + gpio_line_isr_clear(NSLU2_PB_GPIO); + + if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, + SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + NSLU2_RB_IRQ); + + return -EIO; + } + + if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler, + SA_INTERRUPT, "NSLU2 power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + NSLU2_PB_IRQ); + + return -EIO; + } + + return 0; +} + +static void __exit nslu2_power_exit(void) +{ + free_irq(NSLU2_RB_IRQ, NULL); + free_irq(NSLU2_PB_IRQ, NULL); +} + +module_init(nslu2_power_init); +module_exit(nslu2_power_exit); + +MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); +MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c new file mode 100644 index 000000000000..289e94cb65c2 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -0,0 +1,134 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-setup.c + * + * NSLU2 board-setup + * + * based ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Author: Mark Rakes <mrakes at mac.com> + * Maintainers: http://www.nslu2-linux.org/ + * + * Fixed missing init_time in MACHINE_START kas11 10/22/04 + * Changed to conform to new style __init ixdp425 kas11 10/22/04 + */ + +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nslu2_flash_resource = { + .start = NSLU2_FLASH_BASE, + .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nslu2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &nslu2_flash_data, + .num_resources = 1, + .resource = &nslu2_flash_resource, +}; + +static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { + .sda_pin = NSLU2_SDA_PIN, + .scl_pin = NSLU2_SCL_PIN, +}; + +static struct platform_device nslu2_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev.platform_data = &nslu2_i2c_gpio_pins, + .num_resources = 0, +}; + +static struct resource nslu2_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port nslu2_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device nslu2_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = nslu2_uart_data, + .num_resources = 2, + .resource = nslu2_uart_resources, +}; + +static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, + &nslu2_uart, +}; + +static void nslu2_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ + + /* enable the pwr cntl gpio */ + gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); + + /* do the deed */ + gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); +} + +static void __init nslu2_init(void) +{ + ixp4xx_sys_init(); + + pm_power_off = nslu2_power_off; + + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); +} + +MACHINE_START(NSLU2, "Linksys NSLU2") + /* Maintainer: www.nslu2-linux.org */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = nslu2_init, +MACHINE_END diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 27fc2e8e5fca..86a0f0d14345 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -6,10 +6,10 @@ config ARCH_OMAP730 bool "OMAP730 Based System" select ARCH_OMAP_OTG -config ARCH_OMAP1510 +config ARCH_OMAP15XX depends on ARCH_OMAP1 default y - bool "OMAP1510 Based System" + bool "OMAP15xx Based System" config ARCH_OMAP16XX depends on ARCH_OMAP1 @@ -21,7 +21,7 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -64,20 +64,30 @@ config MACH_OMAP_PERSEUS2 config MACH_VOICEBLUE bool "Voiceblue" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Support for Voiceblue GSM/VoIP gateway. Say Y here if you have such a board. config MACH_NETSTAR bool "NetStar" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Support for NetStar PBX. Say Y here if you have such a board. +config MACH_OMAP_PALMTE + bool "Palm Tungsten E" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Palm Tungsten E PDA. Currently only the LCD panel + is supported. To boot the kernel, you'll need a PalmOS compatible + bootloader; check out http://palmtelinux.sourceforge.net for more + informations. + Say Y here if you have such a PDA, say NO otherwise. + config MACH_OMAP_GENERIC bool "Generic OMAP board" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) help Support for generic OMAP-1510, 1610 or 1710 board with no FPGA. Can be used as template for porting Linux to @@ -121,32 +131,32 @@ config OMAP_ARM_182MHZ config OMAP_ARM_168MHZ bool "OMAP ARM 168 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 168MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_150MHZ bool "OMAP ARM 150 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Enable 150MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_120MHZ bool "OMAP ARM 120 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 120MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_60MHZ bool "OMAP ARM 60 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) default y help Enable 60MHz clock for OMAP CPU. If unsure, say Y. config OMAP_ARM_30MHZ bool "OMAP ARM 30 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 30MHz clock for OMAP CPU. If unsure, say N. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 181a93deaaee..b0b00156faae 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := io.o id.o irq.o time.o serial.o devices.o +obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o led-y := leds.o # Specific board support @@ -15,8 +15,9 @@ obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o +obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o -ifeq ($(CONFIG_ARCH_OMAP1510),y) +ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o endif diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index c209c7172a9a..4b292e93fbe2 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -28,8 +28,6 @@ #include <asm/arch/board.h> #include <asm/arch/common.h> -static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static void __init omap_generic_init_irq(void) { omap_init_irq(); @@ -37,7 +35,7 @@ static void __init omap_generic_init_irq(void) /* assume no Mini-AB port */ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config generic1510_usb_config __initdata = { .register_host = 1, .register_dev = 1, @@ -76,21 +74,19 @@ static struct omap_mmc_config generic_mmc_config __initdata = { #endif +static struct omap_uart_config generic_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel generic_config[] = { { OMAP_TAG_USB, NULL }, { OMAP_TAG_MMC, &generic_mmc_config }, + { OMAP_TAG_UART, &generic_uart_config }, }; static void __init omap_generic_init(void) { - const struct omap_uart_config *uart_conf; - - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { generic_config[0].data = &generic1510_usb_config; } @@ -101,20 +97,9 @@ static void __init omap_generic_init(void) } #endif - uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); - if (uart_conf != NULL) { - unsigned int enabled_ports, i; - - enabled_ports = uart_conf->enabled_uarts; - for (i = 0; i < 3; i++) { - if (!(enabled_ports & (1 << i))) - generic_serial_ports[i] = 0; - } - } - omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); - omap_serial_init(generic_serial_ports); + omap_serial_init(); } static void __init omap_generic_map_io(void) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 4ee6bd8a50b8..a07e2c9307fa 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -40,8 +40,6 @@ extern int omap_gpio_init(void); -static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition h2_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -160,9 +158,20 @@ static struct omap_mmc_config h2_mmc_config __initdata = { }, }; +static struct omap_uart_config h2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_lcd_config h2_lcd_config __initdata = { + .panel_name = "h2", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel h2_config[] = { { OMAP_TAG_USB, &h2_usb_config }, { OMAP_TAG_MMC, &h2_mmc_config }, + { OMAP_TAG_UART, &h2_uart_config }, + { OMAP_TAG_LCD, &h2_lcd_config }, }; static void __init h2_init(void) @@ -180,12 +189,12 @@ static void __init h2_init(void) platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); + omap_serial_init(); } static void __init h2_map_io(void) { omap_map_common_io(); - omap_serial_init(h2_serial_ports); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index fc824361430d..668e278433c2 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -41,8 +41,6 @@ extern int omap_gpio_init(void); -static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition h3_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -168,9 +166,20 @@ static struct omap_mmc_config h3_mmc_config __initdata = { }, }; +static struct omap_uart_config h3_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_lcd_config h3_lcd_config __initdata = { + .panel_name = "h3", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel h3_config[] = { - { OMAP_TAG_USB, &h3_usb_config }, - { OMAP_TAG_MMC, &h3_mmc_config }, + { OMAP_TAG_USB, &h3_usb_config }, + { OMAP_TAG_MMC, &h3_mmc_config }, + { OMAP_TAG_UART, &h3_uart_config }, + { OMAP_TAG_LCD, &h3_lcd_config }, }; static void __init h3_init(void) @@ -180,6 +189,7 @@ static void __init h3_init(void) (void) platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); + omap_serial_init(); } static void __init h3_init_smc91x(void) @@ -201,7 +211,6 @@ void h3_init_irq(void) static void __init h3_map_io(void) { omap_map_common_io(); - omap_serial_init(h3_serial_ports); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index a2eac853b2da..95f1ff36cdcb 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -36,8 +36,6 @@ #include <asm/arch/usb.h> #include <asm/arch/common.h> -static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition innovator_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -99,7 +97,7 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc innovator1510_io_desc[] __initdata = { @@ -136,7 +134,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { &innovator1510_smc91x_device, }; -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #ifdef CONFIG_ARCH_OMAP16XX @@ -185,7 +183,7 @@ void innovator_init_irq(void) { omap_init_irq(); omap_gpio_init(); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1510_fpga_init_irq(); } @@ -193,7 +191,7 @@ void innovator_init_irq(void) innovator_init_smc91x(); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config innovator1510_usb_config __initdata = { /* for bundled non-standard host and peripheral cables */ .hmc_mode = 4, @@ -205,6 +203,11 @@ static struct omap_usb_config innovator1510_usb_config __initdata = { .register_dev = 1, .pins[0] = 2, }; + +static struct omap_lcd_config innovator1510_lcd_config __initdata = { + .panel_name = "inn1510", + .ctrl_name = "internal", +}; #endif #ifdef CONFIG_ARCH_OMAP16XX @@ -222,6 +225,11 @@ static struct omap_usb_config h2_usb_config __initdata = { .pins[1] = 3, }; + +static struct omap_lcd_config innovator1610_lcd_config __initdata = { + .panel_name = "inn1610", + .ctrl_name = "internal", +}; #endif static struct omap_mmc_config innovator_mmc_config __initdata = { @@ -234,14 +242,20 @@ static struct omap_mmc_config innovator_mmc_config __initdata = { }, }; +static struct omap_uart_config innovator_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel innovator_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_LCD, NULL }, { OMAP_TAG_MMC, &innovator_mmc_config }, + { OMAP_TAG_UART, &innovator_uart_config }, }; static void __init innovator_init(void) { -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); } @@ -252,23 +266,28 @@ static void __init innovator_init(void) } #endif -#ifdef CONFIG_ARCH_OMAP1510 - if (cpu_is_omap1510()) +#ifdef CONFIG_ARCH_OMAP15XX + if (cpu_is_omap1510()) { innovator_config[0].data = &innovator1510_usb_config; + innovator_config[1].data = &innovator1510_lcd_config; + } #endif #ifdef CONFIG_ARCH_OMAP16XX - if (cpu_is_omap1610()) + if (cpu_is_omap1610()) { innovator_config[0].data = &h2_usb_config; + innovator_config[1].data = &innovator1610_lcd_config; + } #endif omap_board_config = innovator_config; omap_board_config_size = ARRAY_SIZE(innovator_config); + omap_serial_init(); } static void __init innovator_map_io(void) { omap_map_common_io(); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); udelay(10); /* Delay needed for FPGA */ @@ -280,7 +299,6 @@ static void __init innovator_map_io(void) fpga_read(OMAP1510_FPGA_BOARD_REV)); } #endif - omap_serial_init(innovator_serial_ports); } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index c851c2e4dfcb..0448fa7de8a4 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -55,6 +55,14 @@ static struct platform_device *netstar_devices[] __initdata = { &netstar_smc91x_device, }; +static struct omap_uart_config netstar_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel netstar_config[] = { + { OMAP_TAG_UART, &netstar_uart_config }, +}; + static void __init netstar_init_irq(void) { omap_init_irq(); @@ -92,14 +100,15 @@ static void __init netstar_init(void) /* Switch off red LED */ omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ omap_writeb(0x80, OMAP_LPG1_LCR); -} -static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; + omap_board_config = netstar_config; + omap_board_config_size = ARRAY_SIZE(netstar_config); + omap_serial_init(); +} static void __init netstar_map_io(void) { omap_map_common_io(); - omap_serial_init(omap_serial_ports); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index a88524e7c315..e990e1bc1669 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -46,8 +46,6 @@ #include <asm/arch/tc.h> #include <asm/arch/common.h> -static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; - static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -155,7 +153,7 @@ static void __init osk_init_smc91x(void) } /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ - EMIFS_CCS(1) |= 0x2; + EMIFS_CCS(1) |= 0x3; } static void __init osk_init_cf(void) @@ -193,8 +191,19 @@ static struct omap_usb_config osk_usb_config __initdata = { .pins[0] = 2, }; +static struct omap_uart_config osk_uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static struct omap_lcd_config osk_lcd_config __initdata = { + .panel_name = "osk", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel osk_config[] = { { OMAP_TAG_USB, &osk_usb_config }, + { OMAP_TAG_UART, &osk_uart_config }, + { OMAP_TAG_LCD, &osk_lcd_config }, }; #ifdef CONFIG_OMAP_OSK_MISTRAL @@ -254,13 +263,13 @@ static void __init osk_init(void) omap_board_config_size = ARRAY_SIZE(osk_config); USB_TRANSCEIVER_CTRL_REG |= (3 << 1); + omap_serial_init(); osk_mistral_init(); } static void __init osk_map_io(void) { omap_map_common_io(); - omap_serial_init(osk_serial_ports); } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c new file mode 100644 index 000000000000..540b20d78cca --- /dev/null +++ b/arch/arm/mach-omap1/board-palmte.c @@ -0,0 +1,87 @@ +/* + * linux/arch/arm/mach-omap1/board-palmte.c + * + * Modified from board-generic.c + * + * Support for the Palm Tungsten E PDA. + * + * Original version : Laurent Gonzalez + * + * Maintainters : http://palmtelinux.sf.net + * palmtelinux-developpers@lists.sf.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/notifier.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/hardware/clock.h> + +static void __init omap_generic_init_irq(void) +{ + omap_init_irq(); +} + +static struct omap_usb_config palmte_usb_config __initdata = { + .register_dev = 1, + .hmc_mode = 0, + .pins[0] = 3, +}; + +static struct omap_mmc_config palmte_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config palmte_lcd_config __initdata = { + .panel_name = "palmte", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel palmte_config[] = { + { OMAP_TAG_USB, &palmte_usb_config }, + { OMAP_TAG_MMC, &palmte_mmc_config }, + { OMAP_TAG_LCD, &palmte_lcd_config }, +}; + +static void __init omap_generic_init(void) +{ + omap_board_config = palmte_config; + omap_board_config_size = ARRAY_SIZE(palmte_config); +} + +static void __init omap_generic_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 354b157acb3a..bd900b7ab33c 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -29,6 +29,7 @@ #include <asm/arch/mux.h> #include <asm/arch/fpga.h> #include <asm/arch/common.h> +#include <asm/arch/board.h> static struct resource smc91x_resources[] = { [0] = { @@ -43,8 +44,6 @@ static struct resource smc91x_resources[] = { }, }; -static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0}; - static struct mtd_partition p2_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -111,9 +110,27 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, }; +static struct omap_uart_config perseus2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1)), +}; + +static struct omap_lcd_config perseus2_lcd_config __initdata = { + .panel_name = "p2", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel perseus2_config[] = { + { OMAP_TAG_UART, &perseus2_uart_config }, + { OMAP_TAG_LCD, &perseus2_lcd_config }, +}; + static void __init omap_perseus2_init(void) { (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + + omap_board_config = perseus2_config; + omap_board_config_size = ARRAY_SIZE(perseus2_config); + omap_serial_init(); } static void __init perseus2_init_smc91x(void) @@ -131,7 +148,6 @@ void omap_perseus2_init_irq(void) omap_gpio_init(); perseus2_init_smc91x(); } - /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { { @@ -179,7 +195,6 @@ static void __init omap_perseus2_map_io(void) * It is used as the Ethernet controller interrupt */ omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); - omap_serial_init(p2_serial_ports); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 3f018b296861..6f9a6220e78a 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -150,9 +150,14 @@ static struct omap_mmc_config voiceblue_mmc_config __initdata = { }, }; +static struct omap_uart_config voiceblue_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel voiceblue_config[] = { { OMAP_TAG_USB, &voiceblue_usb_config }, { OMAP_TAG_MMC, &voiceblue_mmc_config }, + { OMAP_TAG_UART, &voiceblue_uart_config }, }; static void __init voiceblue_init_irq(void) @@ -191,6 +196,7 @@ static void __init voiceblue_init(void) platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); + omap_serial_init(); /* There is a good chance board is going up, so enable power LED * (it is connected through invertor) */ @@ -198,12 +204,9 @@ static void __init voiceblue_init(void) omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ } -static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static void __init voiceblue_map_io(void) { omap_map_common_io(); - omap_serial_init(omap_serial_ports); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c new file mode 100644 index 000000000000..4277eee44ed5 --- /dev/null +++ b/arch/arm/mach-omap1/clock.c @@ -0,0 +1,792 @@ +/* + * linux/arch/arm/mach-omap1/clock.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * + * Modified to use omap shared clock framework by + * Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#include <asm/arch/usb.h> +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> + +#include "clock.h" + +__u32 arm_idlect1_mask; + +/*------------------------------------------------------------------------- + * Omap1 specific clock functions + *-------------------------------------------------------------------------*/ + +static void omap1_watchdog_recalc(struct clk * clk) +{ + clk->rate = clk->parent->rate / 14; +} + +static void omap1_uart_recalc(struct clk * clk) +{ + unsigned int val = omap_readl(clk->enable_reg); + if (val & clk->enable_bit) + clk->rate = 48000000; + else + clk->rate = 12000000; +} + +static int omap1_clk_enable_dsp_domain(struct clk *clk) +{ + int retval; + + retval = omap1_clk_use(&api_ck.clk); + if (!retval) { + retval = omap1_clk_enable(clk); + omap1_clk_unuse(&api_ck.clk); + } + + return retval; +} + +static void omap1_clk_disable_dsp_domain(struct clk *clk) +{ + if (omap1_clk_use(&api_ck.clk) == 0) { + omap1_clk_disable(clk); + omap1_clk_unuse(&api_ck.clk); + } +} + +static int omap1_clk_enable_uart_functional(struct clk *clk) +{ + int ret; + struct uart_clk *uclk; + + ret = omap1_clk_enable(clk); + if (ret == 0) { + /* Set smart idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, + uclk->sysc_addr); + } + + return ret; +} + +static void omap1_clk_disable_uart_functional(struct clk *clk) +{ + struct uart_clk *uclk; + + /* Set force idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); + + omap1_clk_disable(clk); +} + +static void omap1_clk_allow_idle(struct clk *clk) +{ + struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; + + if (!(clk->flags & CLOCK_IDLE_CONTROL)) + return; + + if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count)) + arm_idlect1_mask |= 1 << iclk->idlect_shift; +} + +static void omap1_clk_deny_idle(struct clk *clk) +{ + struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; + + if (!(clk->flags & CLOCK_IDLE_CONTROL)) + return; + + if (iclk->no_idle_count++ == 0) + arm_idlect1_mask &= ~(1 << iclk->idlect_shift); +} + +static __u16 verify_ckctl_value(__u16 newval) +{ + /* This function checks for following limitations set + * by the hardware (all conditions must be true): + * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 + * ARM_CK >= TC_CK + * DSP_CK >= TC_CK + * DSPMMU_CK >= TC_CK + * + * In addition following rules are enforced: + * LCD_CK <= TC_CK + * ARMPER_CK <= TC_CK + * + * However, maximum frequencies are not checked for! + */ + __u8 per_exp; + __u8 lcd_exp; + __u8 arm_exp; + __u8 dsp_exp; + __u8 tc_exp; + __u8 dspmmu_exp; + + per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; + lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; + arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; + dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; + tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; + dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; + + if (dspmmu_exp < dsp_exp) + dspmmu_exp = dsp_exp; + if (dspmmu_exp > dsp_exp+1) + dspmmu_exp = dsp_exp+1; + if (tc_exp < arm_exp) + tc_exp = arm_exp; + if (tc_exp < dspmmu_exp) + tc_exp = dspmmu_exp; + if (tc_exp > lcd_exp) + lcd_exp = tc_exp; + if (tc_exp > per_exp) + per_exp = tc_exp; + + newval &= 0xf000; + newval |= per_exp << CKCTL_PERDIV_OFFSET; + newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; + newval |= arm_exp << CKCTL_ARMDIV_OFFSET; + newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; + newval |= tc_exp << CKCTL_TCDIV_OFFSET; + newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; + + return newval; +} + +static int calc_dsor_exp(struct clk *clk, unsigned long rate) +{ + /* Note: If target frequency is too low, this function will return 4, + * which is invalid value. Caller must check for this value and act + * accordingly. + * + * Note: This function does not check for following limitations set + * by the hardware (all conditions must be true): + * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 + * ARM_CK >= TC_CK + * DSP_CK >= TC_CK + * DSPMMU_CK >= TC_CK + */ + unsigned long realrate; + struct clk * parent; + unsigned dsor_exp; + + if (unlikely(!(clk->flags & RATE_CKCTL))) + return -EINVAL; + + parent = clk->parent; + if (unlikely(parent == 0)) + return -EIO; + + realrate = parent->rate; + for (dsor_exp=0; dsor_exp<4; dsor_exp++) { + if (realrate <= rate) + break; + + realrate /= 2; + } + + return dsor_exp; +} + +static void omap1_ckctl_recalc(struct clk * clk) +{ + int dsor; + + /* Calculate divisor encoded as 2-bit exponent */ + dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); + + if (unlikely(clk->rate == clk->parent->rate / dsor)) + return; /* No change, quick exit */ + clk->rate = clk->parent->rate / dsor; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +static void omap1_ckctl_recalc_dsp_domain(struct clk * clk) +{ + int dsor; + + /* Calculate divisor encoded as 2-bit exponent + * + * The clock control bits are in DSP domain, + * so api_ck is needed for access. + * Note that DSP_CKCTL virt addr = phys addr, so + * we must use __raw_readw() instead of omap_readw(). + */ + omap1_clk_use(&api_ck.clk); + dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); + omap1_clk_unuse(&api_ck.clk); + + if (unlikely(clk->rate == clk->parent->rate / dsor)) + return; /* No change, quick exit */ + clk->rate = clk->parent->rate / dsor; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +/* MPU virtual clock functions */ +static int omap1_select_table_rate(struct clk * clk, unsigned long rate) +{ + /* Find the highest supported frequency <= rate and switch to it */ + struct mpu_rate * ptr; + + if (clk != &virtual_ck_mpu) + return -EINVAL; + + for (ptr = rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ck_ref.rate) + continue; + + /* DPLL1 cannot be reprogrammed without risking system crash */ + if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) + continue; + + /* Can check only after xtal frequency check */ + if (ptr->rate <= rate) + break; + } + + if (!ptr->rate) + return -EINVAL; + + /* + * In most cases we should not need to reprogram DPLL. + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + + ck_dpll1.rate = ptr->pll_rate; + propagate_rate(&ck_dpll1); + return 0; +} + +static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + int dsor_exp; + __u16 regval; + + if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = __raw_readw(DSP_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + __raw_writew(regval, DSP_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + ret = 0; + } + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) +{ + /* Find the highest supported frequency <= rate */ + struct mpu_rate * ptr; + long highest_rate; + + if (clk != &virtual_ck_mpu) + return -EINVAL; + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ck_ref.rate) + continue; + + highest_rate = ptr->rate; + + /* Can check only after xtal frequency check */ + if (ptr->rate <= rate) + break; + } + + return highest_rate; +} + +static unsigned calc_ext_dsor(unsigned long rate) +{ + unsigned dsor; + + /* MCLK and BCLK divisor selection is not linear: + * freq = 96MHz / dsor + * + * RATIO_SEL range: dsor <-> RATIO_SEL + * 0..6: (RATIO_SEL+2) <-> (dsor-2) + * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) + * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 + * can not be used. + */ + for (dsor = 2; dsor < 96; ++dsor) { + if ((dsor & 1) && dsor > 8) + continue; + if (rate >= 96000000 / dsor) + break; + } + return dsor; +} + +/* Only needed on 1510 */ +static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) +{ + unsigned int val; + + val = omap_readl(clk->enable_reg); + if (rate == 12000000) + val &= ~(1 << clk->enable_bit); + else if (rate == 48000000) + val |= (1 << clk->enable_bit); + else + return -EINVAL; + omap_writel(val, clk->enable_reg); + clk->rate = rate; + + return 0; +} + +/* External clock (MCLK & BCLK) functions */ +static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) +{ + unsigned dsor; + __u16 ratio_bits; + + dsor = calc_ext_dsor(rate); + clk->rate = 96000000 / dsor; + if (dsor > 8) + ratio_bits = ((dsor - 8) / 2 + 6) << 2; + else + ratio_bits = (dsor - 2) << 2; + + ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd; + omap_writew(ratio_bits, clk->enable_reg); + + return 0; +} + +static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate) +{ + return 96000000 / calc_ext_dsor(rate); +} + +static void omap1_init_ext_clk(struct clk * clk) +{ + unsigned dsor; + __u16 ratio_bits; + + /* Determine current rate and ensure clock is based on 96MHz APLL */ + ratio_bits = omap_readw(clk->enable_reg) & ~1; + omap_writew(ratio_bits, clk->enable_reg); + + ratio_bits = (ratio_bits & 0xfc) >> 2; + if (ratio_bits > 6) + dsor = (ratio_bits - 6) * 2 + 8; + else + dsor = ratio_bits + 2; + + clk-> rate = 96000000 / dsor; +} + +static int omap1_clk_use(struct clk *clk) +{ + int ret = 0; + if (clk->usecount++ == 0) { + if (likely(clk->parent)) { + ret = omap1_clk_use(clk->parent); + + if (unlikely(ret != 0)) { + clk->usecount--; + return ret; + } + + if (clk->flags & CLOCK_NO_IDLE_PARENT) + if (!cpu_is_omap24xx()) + omap1_clk_deny_idle(clk->parent); + } + + ret = clk->enable(clk); + + if (unlikely(ret != 0) && clk->parent) { + omap1_clk_unuse(clk->parent); + clk->usecount--; + } + } + + return ret; +} + +static void omap1_clk_unuse(struct clk *clk) +{ + if (clk->usecount > 0 && !(--clk->usecount)) { + clk->disable(clk); + if (likely(clk->parent)) { + omap1_clk_unuse(clk->parent); + if (clk->flags & CLOCK_NO_IDLE_PARENT) + if (!cpu_is_omap24xx()) + omap1_clk_allow_idle(clk->parent); + } + } +} + +static int omap1_clk_enable(struct clk *clk) +{ + __u16 regval16; + __u32 regval32; + + if (clk->flags & ALWAYS_ENABLED) + return 0; + + if (unlikely(clk->enable_reg == 0)) { + printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + clk->name); + return 0; + } + + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } + + return 0; +} + +static void omap1_clk_disable(struct clk *clk) +{ + __u16 regval16; + __u32 regval32; + + if (clk->enable_reg == 0) + return; + + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } +} + +static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +{ + int dsor_exp; + + if (clk->flags & RATE_FIXED) + return clk->rate; + + if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp < 0) + return dsor_exp; + if (dsor_exp > 3) + dsor_exp = 3; + return clk->parent->rate / (1 << dsor_exp); + } + + if(clk->round_rate != 0) + return clk->round_rate(clk, rate); + + return clk->rate; +} + +static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + int dsor_exp; + __u16 regval; + + if (clk->set_rate) + ret = clk->set_rate(clk, rate); + else if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = omap_readw(ARM_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + regval = verify_ckctl_value(regval); + omap_writew(regval, ARM_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + ret = 0; + } + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +/*------------------------------------------------------------------------- + * Omap1 clock reset and init functions + *-------------------------------------------------------------------------*/ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. See also omap_late_clk_reset(). + */ +static inline void omap1_early_clk_reset(void) +{ + //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +} + +static int __init omap1_late_clk_reset(void) +{ + /* Turn off all unused clocks */ + struct clk *p; + __u32 regval32; + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(regval32, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); + + list_for_each_entry(p, &clocks, node) { + if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || + p->enable_reg == 0) + continue; + + /* Clocks in the DSP domain need api_ck. Just assume bootloader + * has not enabled any DSP clocks */ + if ((u32)p->enable_reg == DSP_IDLECT2) { + printk(KERN_INFO "Skipping reset check for DSP domain " + "clock \"%s\"\n", p->name); + continue; + } + + /* Is the clock already disabled? */ + if (p->flags & ENABLE_REG_32BIT) { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(p->enable_reg); + else + regval32 = omap_readl(p->enable_reg); + } else { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(p->enable_reg); + else + regval32 = omap_readw(p->enable_reg); + } + + if ((regval32 & (1 << p->enable_bit)) == 0) + continue; + + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || p == &ck_dpll1out.clk // FIX: SoSSI, SSR + || p == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + p->name); + continue; + } + + printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); + p->disable(p); + printk(" done\n"); + } + + return 0; +} +late_initcall(omap1_late_clk_reset); + +#else +#define omap1_early_clk_reset() {} +#endif + +static struct clk_functions omap1_clk_functions = { + .clk_use = omap1_clk_use, + .clk_unuse = omap1_clk_unuse, + .clk_round_rate = omap1_clk_round_rate, + .clk_set_rate = omap1_clk_set_rate, +}; + +int __init omap1_clk_init(void) +{ + struct clk ** clkp; + const struct omap_clock_config *info; + int crystal_type = 0; /* Default 12 MHz */ + + omap1_early_clk_reset(); + clk_init(&omap1_clk_functions); + + /* By default all idlect1 clocks are allowed to idle */ + arm_idlect1_mask = ~0; + + for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { + if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { + clk_register(*clkp); + continue; + } + + if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) { + clk_register(*clkp); + continue; + } + + if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) { + clk_register(*clkp); + continue; + } + } + + info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); + if (info != NULL) { + if (!cpu_is_omap1510()) + crystal_type = info->system_clock_type; + } + +#if defined(CONFIG_ARCH_OMAP730) + ck_ref.rate = 13000000; +#elif defined(CONFIG_ARCH_OMAP16XX) + if (crystal_type == 2) + ck_ref.rate = 19200000; +#endif + + printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", + omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + + /* We want to be in syncronous scalable mode */ + omap_writew(0x1000, ARM_SYSST); + +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } + propagate_rate(&ck_dpll1); +#else + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + printk(KERN_ERR "System frequencies not set. Check your config.\n"); + /* Guess sane values (60MHz) */ + omap_writew(0x2290, DPLL_CTL); + omap_writew(0x1005, ARM_CKCTL); + ck_dpll1.rate = 60000000; + propagate_rate(&ck_dpll1); + } +#endif + /* Cache rates for clocks connected to ck_ref (not dpll1) */ + propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); +#endif + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + + /* Put DSP/MPUI into reset until needed */ + omap_writew(0, ARM_RSTCT1); + omap_writew(1, ARM_RSTCT2); + omap_writew(0x400, ARM_IDLECT1); + + /* + * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) + * of the ARM_IDLECT2 register must be set to zero. The power-on + * default value of this bit is one. + */ + omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_use(&armper_ck.clk); + clk_use(&armxor_ck.clk); + clk_use(&armtim_ck.clk); /* This should be done by timer code */ + + if (cpu_is_omap1510()) + clk_enable(&arm_gpio_ck); + + return 0; +} + diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h new file mode 100644 index 000000000000..f3bdfb50e01a --- /dev/null +++ b/arch/arm/mach-omap1/clock.h @@ -0,0 +1,768 @@ +/* + * linux/arch/arm/mach-omap1/clock.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H +#define __ARCH_ARM_MACH_OMAP1_CLOCK_H + +static int omap1_clk_enable(struct clk * clk); +static void omap1_clk_disable(struct clk * clk); +static void omap1_ckctl_recalc(struct clk * clk); +static void omap1_watchdog_recalc(struct clk * clk); +static void omap1_ckctl_recalc_dsp_domain(struct clk * clk); +static int omap1_clk_enable_dsp_domain(struct clk * clk); +static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); +static void omap1_clk_disable_dsp_domain(struct clk * clk); +static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); +static void omap1_uart_recalc(struct clk * clk); +static int omap1_clk_enable_uart_functional(struct clk * clk); +static void omap1_clk_disable_uart_functional(struct clk * clk); +static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); +static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); +static void omap1_init_ext_clk(struct clk * clk); +static int omap1_select_table_rate(struct clk * clk, unsigned long rate); +static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); +static int omap1_clk_use(struct clk *clk); +static void omap1_clk_unuse(struct clk *clk); + +struct mpu_rate { + unsigned long rate; + unsigned long xtal; + unsigned long pll_rate; + __u16 ckctl_val; + __u16 dpllctl_val; +}; + +struct uart_clk { + struct clk clk; + unsigned long sysc_addr; +}; + +/* Provide a method for preventing idling some ARM IDLECT clocks */ +struct arm_idlect1_clk { + struct clk clk; + unsigned long no_idle_count; + __u8 idlect_shift; +}; + +/* ARM_CKCTL bit shifts */ +#define CKCTL_PERDIV_OFFSET 0 +#define CKCTL_LCDDIV_OFFSET 2 +#define CKCTL_ARMDIV_OFFSET 4 +#define CKCTL_DSPDIV_OFFSET 6 +#define CKCTL_TCDIV_OFFSET 8 +#define CKCTL_DSPMMUDIV_OFFSET 10 +/*#define ARM_TIMXO 12*/ +#define EN_DSPCK 13 +/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ +/* DSP_CKCTL bit shifts */ +#define CKCTL_DSPPERDIV_OFFSET 0 + +/* ARM_IDLECT2 bit shifts */ +#define EN_WDTCK 0 +#define EN_XORPCK 1 +#define EN_PERCK 2 +#define EN_LCDCK 3 +#define EN_LBCK 4 /* Not on 1610/1710 */ +/*#define EN_HSABCK 5*/ +#define EN_APICK 6 +#define EN_TIMCK 7 +#define DMACK_REQ 8 +#define EN_GPIOCK 9 /* Not on 1610/1710 */ +/*#define EN_LBFREECK 10*/ +#define EN_CKOUT_ARM 11 + +/* ARM_IDLECT3 bit shifts */ +#define EN_OCPI_CK 0 +#define EN_TC1_CK 2 +#define EN_TC2_CK 4 + +/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ +#define EN_DSPTIMCK 5 + +/* Various register defines for clock controls scattered around OMAP chip */ +#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ +#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ +#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ +#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ +#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 +#define COM_CLK_DIV_CTRL_SEL 0xfffe0878 +#define SOFT_REQ_REG 0xfffe0834 +#define SOFT_REQ_REG2 0xfffe0880 + +/*------------------------------------------------------------------------- + * Omap1 MPU rate table + *-------------------------------------------------------------------------*/ +static struct mpu_rate rate_table[] = { + /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL + * NOTE: Comment order here is different from bits in CKCTL value: + * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv + */ +#if defined(CONFIG_OMAP_ARM_216MHZ) + { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_195MHZ) + { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_192MHZ) + { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ + { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ + { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ + { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_182MHZ) + { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_168MHZ) + { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_150MHZ) + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_120MHZ) + { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_96MHZ) + { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_60MHZ) + { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_30MHZ) + { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ +#endif + { 0, 0, 0, 0, 0 }, +}; + +/*------------------------------------------------------------------------- + * Omap1 clocks + *-------------------------------------------------------------------------*/ + +static struct clk ck_ref = { + .name = "ck_ref", + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ALWAYS_ENABLED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk ck_dpll1 = { + .name = "ck_dpll1", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_PROPAGATES | ALWAYS_ENABLED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk ck_dpll1out = { + .clk = { + .name = "ck_dpll1out", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_CKOUT_ARM, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 12, +}; + +static struct clk arm_ck = { + .name = "arm_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, + .rate_offset = CKCTL_ARMDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk armper_ck = { + .clk = { + .name = "armper_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 2, +}; + +static struct clk arm_gpio_ck = { + .name = "arm_gpio_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_GPIOCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk armxor_ck = { + .clk = { + .name = "armxor_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 1, +}; + +static struct arm_idlect1_clk armtim_ck = { + .clk = { + .name = "armtim_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_TIMCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 9, +}; + +static struct arm_idlect1_clk armwdt_ck = { + .clk = { + .name = "armwdt_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_WDTCK, + .recalc = &omap1_watchdog_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 0, +}; + +static struct clk arminth_ck16xx = { + .name = "arminth_ck", + .parent = &arm_ck, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + /* Note: On 16xx the frequency can be divided by 2 by programming + * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 + * + * 1510 version is in TC clocks. + */ + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dsp_ck = { + .name = "dsp_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL, + .enable_reg = (void __iomem *)ARM_CKCTL, + .enable_bit = EN_DSPCK, + .rate_offset = CKCTL_DSPDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dspmmu_ck = { + .name = "dspmmu_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | ALWAYS_ENABLED, + .rate_offset = CKCTL_DSPMMUDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dspper_ck = { + .name = "dspper_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc_dsp_domain, + .set_rate = &omap1_clk_set_rate_dsp_domain, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ +static struct arm_idlect1_clk tc_ck = { + .clk = { + .name = "tc_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IN_OMAP730 | RATE_CKCTL | + RATE_PROPAGATES | ALWAYS_ENABLED | + CLOCK_IDLE_CONTROL, + .rate_offset = CKCTL_TCDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 6, +}; + +static struct clk arminth_ck1510 = { + .name = "arminth_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + /* Note: On 1510 the frequency follows TC_CK + * + * 16xx version is in MPU clocks. + */ + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tipb_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "tibp_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk l3_ocpi_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "l3_ocpi_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_OCPI_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tc1_ck = { + .name = "tc1_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_TC1_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tc2_ck = { + .name = "tc2_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_TC2_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dma_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "dma_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dma_lcdfree_ck = { + .name = "dma_lcdfree_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk api_ck = { + .clk = { + .name = "api_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_APICK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 8, +}; + +static struct arm_idlect1_clk lb_ck = { + .clk = { + .name = "lb_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LBCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 4, +}; + +static struct clk rhea1_ck = { + .name = "rhea1_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk rhea2_ck = { + .name = "rhea2_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk lcd_ck_16xx = { + .name = "lcd_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk lcd_ck_1510 = { + .clk = { + .name = "lcd_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | RATE_CKCTL | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 3, +}; + +static struct clk uart1_1510 = { + .name = "uart1_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | + ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct uart_clk uart1_16xx = { + .clk = { + .name = "uart1_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | + ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 29, + .enable = &omap1_clk_enable_uart_functional, + .disable = &omap1_clk_disable_uart_functional, + }, + .sysc_addr = 0xfffb0054, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ENABLE_REG_32BIT | ALWAYS_ENABLED | + CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk uart3_1510 = { + .name = "uart3_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | + ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct uart_clk uart3_16xx = { + .clk = { + .name = "uart3_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | + ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 31, + .enable = &omap1_clk_enable_uart_functional, + .disable = &omap1_clk_disable_uart_functional, + }, + .sysc_addr = 0xfffb9854, +}; + +static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ + .name = "usb_clko", + /* Direct from ULPD, no parent */ + .rate = 6000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL, + .enable_bit = USB_MCLK_EN_BIT, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_hhc_ck1510 = { + .name = "usb_hhc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ + .flags = CLOCK_IN_OMAP1510 | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = USB_HOST_HHC_UHOST_EN, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_hhc_ck16xx = { + .name = "usb_hhc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ + .flags = CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */, + .enable_bit = 8 /* UHOST_EN */, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .enable_reg = (void __iomem *)SOFT_REQ_REG, + .enable_bit = 4, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mclk_1510 = { + .name = "mclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mclk_16xx = { + .name = "mclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL, + .enable_bit = COM_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk bclk_1510 = { + .name = "bclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk bclk_16xx = { + .name = "bclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL, + .enable_bit = SWD_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mmc1_ck = { + .name = "mmc1_ck", + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 23, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mmc2_ck = { + .name = "mmc2_ck", + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 20, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk virtual_ck_mpu = { + .name = "mpu", + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_CLOCK | ALWAYS_ENABLED, + .parent = &arm_ck, /* Is smarter alias for */ + .recalc = &followparent_recalc, + .set_rate = &omap1_select_table_rate, + .round_rate = &omap1_round_to_table_rate, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk * onchip_clks[] = { + /* non-ULPD clocks */ + &ck_ref, + &ck_dpll1, + /* CK_GEN1 clocks */ + &ck_dpll1out.clk, + &arm_ck, + &armper_ck.clk, + &arm_gpio_ck, + &armxor_ck.clk, + &armtim_ck.clk, + &armwdt_ck.clk, + &arminth_ck1510, &arminth_ck16xx, + /* CK_GEN2 clocks */ + &dsp_ck, + &dspmmu_ck, + &dspper_ck, + &dspxor_ck, + &dsptim_ck, + /* CK_GEN3 clocks */ + &tc_ck.clk, + &tipb_ck, + &l3_ocpi_ck, + &tc1_ck, + &tc2_ck, + &dma_ck, + &dma_lcdfree_ck, + &api_ck.clk, + &lb_ck.clk, + &rhea1_ck, + &rhea2_ck, + &lcd_ck_16xx, + &lcd_ck_1510.clk, + /* ULPD clocks */ + &uart1_1510, + &uart1_16xx.clk, + &uart2_ck, + &uart3_1510, + &uart3_16xx.clk, + &usb_clko, + &usb_hhc_ck1510, &usb_hhc_ck16xx, + &usb_dc_ck, + &mclk_1510, &mclk_16xx, + &bclk_1510, &bclk_16xx, + &mmc1_ck, + &mmc2_ck, + /* Virtual clocks */ + &virtual_ck_mpu, +}; + +#endif diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 3c5d901efeaa..ecbc47514adc 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -25,56 +25,7 @@ #include <asm/arch/mux.h> #include <asm/arch/gpio.h> - -static void omap_nop_release(struct device *dev) -{ - /* Nothing */ -} - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) - -#define OMAP_I2C_BASE 0xfffb3800 - -static struct resource i2c_resources[] = { - { - .start = OMAP_I2C_BASE, - .end = OMAP_I2C_BASE + 0x3f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -/* DMA not used; works around erratum writing to non-empty i2c fifo */ - -static struct platform_device omap_i2c_device = { - .name = "i2c_omap", - .id = -1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(i2c_resources), - .resource = i2c_resources, -}; - -static void omap_init_i2c(void) -{ - /* FIXME define and use a boot tag, in case of boards that - * either don't wire up I2C, or chips that mux it differently... - * it can include clocking and address info, maybe more. - */ - omap_cfg_reg(I2C_SCL); - omap_cfg_reg(I2C_SDA); - - (void) platform_device_register(&omap_i2c_device); -} -#else -static inline void omap_init_i2c(void) {} -#endif +extern void omap_nop_release(struct device *dev); /*-------------------------------------------------------------------------*/ @@ -110,137 +61,6 @@ static inline void omap_init_irda(void) {} /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) - -#define OMAP_MMC1_BASE 0xfffb7800 -#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -static struct omap_mmc_conf mmc1_conf; - -static u64 mmc1_dmamask = 0xffffffff; - -static struct resource mmc1_resources[] = { - { - .start = IO_ADDRESS(OMAP_MMC1_BASE), - .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_MMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device1 = { - .name = "mmci-omap", - .id = 1, - .dev = { - .release = omap_nop_release, - .dma_mask = &mmc1_dmamask, - .platform_data = &mmc1_conf, - }, - .num_resources = ARRAY_SIZE(mmc1_resources), - .resource = mmc1_resources, -}; - -#ifdef CONFIG_ARCH_OMAP16XX - -static struct omap_mmc_conf mmc2_conf; - -static u64 mmc2_dmamask = 0xffffffff; - -static struct resource mmc2_resources[] = { - { - .start = IO_ADDRESS(OMAP_MMC2_BASE), - .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_1610_MMC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device2 = { - .name = "mmci-omap", - .id = 2, - .dev = { - .release = omap_nop_release, - .dma_mask = &mmc2_dmamask, - .platform_data = &mmc2_conf, - }, - .num_resources = ARRAY_SIZE(mmc2_resources), - .resource = mmc2_resources, -}; -#endif - -static void __init omap_init_mmc(void) -{ - const struct omap_mmc_config *mmc_conf; - const struct omap_mmc_conf *mmc; - - /* NOTE: assumes MMC was never (wrongly) enabled */ - mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); - if (!mmc_conf) - return; - - /* block 1 is always available and has just one pinout option */ - mmc = &mmc_conf->mmc[0]; - if (mmc->enabled) { - omap_cfg_reg(MMC_CMD); - omap_cfg_reg(MMC_CLK); - omap_cfg_reg(MMC_DAT0); - if (cpu_is_omap1710()) { - omap_cfg_reg(M15_1710_MMC_CLKI); - omap_cfg_reg(P19_1710_MMC_CMDDIR); - omap_cfg_reg(P20_1710_MMC_DATDIR0); - } - if (mmc->wire4) { - omap_cfg_reg(MMC_DAT1); - /* NOTE: DAT2 can be on W10 (here) or M15 */ - if (!mmc->nomux) - omap_cfg_reg(MMC_DAT2); - omap_cfg_reg(MMC_DAT3); - } - mmc1_conf = *mmc; - (void) platform_device_register(&mmc_omap_device1); - } - -#ifdef CONFIG_ARCH_OMAP16XX - /* block 2 is on newer chips, and has many pinout options */ - mmc = &mmc_conf->mmc[1]; - if (mmc->enabled) { - if (!mmc->nomux) { - omap_cfg_reg(Y8_1610_MMC2_CMD); - omap_cfg_reg(Y10_1610_MMC2_CLK); - omap_cfg_reg(R18_1610_MMC2_CLKIN); - omap_cfg_reg(W8_1610_MMC2_DAT0); - if (mmc->wire4) { - omap_cfg_reg(V8_1610_MMC2_DAT1); - omap_cfg_reg(W15_1610_MMC2_DAT2); - omap_cfg_reg(R10_1610_MMC2_DAT3); - } - - /* These are needed for the level shifter */ - omap_cfg_reg(V9_1610_MMC2_CMDDIR); - omap_cfg_reg(V5_1610_MMC2_DATDIR0); - omap_cfg_reg(W19_1610_MMC2_DATDIR1); - } - - /* Feedback clock must be set on OMAP-1710 MMC2 */ - if (cpu_is_omap1710()) - omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), - MOD_CONF_CTRL_1); - mmc2_conf = *mmc; - (void) platform_device_register(&mmc_omap_device2); - } -#endif - return; -} -#else -static inline void omap_init_mmc(void) {} -#endif - #if defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC) #define OMAP_RTC_BASE 0xfffb4800 @@ -279,38 +99,6 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE) - -#define OMAP_WDT_BASE 0xfffeb000 - -static struct resource wdt_resources[] = { - { - .start = OMAP_WDT_BASE, - .end = OMAP_WDT_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_wdt_device = { - .name = "omap1610_wdt", - .id = -1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt(void) -{ - (void) platform_device_register(&omap_wdt_device); -} -#else -static inline void omap_init_wdt(void) {} -#endif - /*-------------------------------------------------------------------------*/ @@ -334,18 +122,15 @@ static inline void omap_init_wdt(void) {} * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. */ -static int __init omap_init_devices(void) +static int __init omap1_init_devices(void) { /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_i2c(); omap_init_irda(); - omap_init_mmc(); omap_init_rtc(); - omap_init_wdt(); return 0; } -arch_initcall(omap_init_devices); +arch_initcall(omap1_init_devices); diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 986c3b7e09bb..5c637c048368 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -18,6 +18,13 @@ #include <asm/io.h> +#define OMAP_DIE_ID_0 0xfffe1800 +#define OMAP_DIE_ID_1 0xfffe1804 +#define OMAP_PRODUCTION_ID_0 0xfffe2000 +#define OMAP_PRODUCTION_ID_1 0xfffe2004 +#define OMAP32_ID_0 0xfffed400 +#define OMAP32_ID_1 0xfffed404 + struct omap_id { u16 jtag_id; /* Used to determine OMAP type */ u8 die_rev; /* Processor revision */ @@ -27,6 +34,7 @@ struct omap_id { /* Register values to detect the OMAP version */ static struct omap_id omap_ids[] __initdata = { + { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000}, { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, @@ -164,6 +172,7 @@ void __init omap_check_revision(void) case 0x07: system_rev |= 0x07; break; + case 0x03: case 0x15: system_rev |= 0x15; break; diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 79fb86535ebc..a7a19f75b9e1 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,9 +15,10 @@ #include <asm/mach/map.h> #include <asm/io.h> +#include <asm/arch/mux.h> #include <asm/arch/tc.h> -extern int clk_init(void); +extern int omap1_clk_init(void); extern void omap_check_revision(void); extern void omap_sram_init(void); @@ -50,7 +51,7 @@ static struct map_desc omap730_io_desc[] __initdata = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { .virtual = OMAP1510_DSP_BASE, @@ -98,7 +99,7 @@ static void __init _omap_map_io(void) iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); } @@ -119,7 +120,7 @@ static void __init _omap_map_io(void) /* Must init clocks early to assure that timer interrupt works */ - clk_init(); + omap1_clk_init(); } /* @@ -127,7 +128,9 @@ static void __init _omap_map_io(void) */ void __init omap_map_common_io(void) { - if (!initialized) + if (!initialized) { _omap_map_io(); + omap1_mux_init(); + } } diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 192ce6055faa..ed65a7d2e941 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -47,6 +47,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/arch/gpio.h> +#include <asm/arch/cpu.h> #include <asm/io.h> @@ -147,11 +148,15 @@ static struct omap_irq_bank omap730_irq_banks[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, }; +static struct omap_irq_bank omap310_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 }, +}; #endif #if defined(CONFIG_ARCH_OMAP16XX) @@ -181,11 +186,15 @@ void __init omap_init_irq(void) irq_bank_count = ARRAY_SIZE(omap730_irq_banks); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { irq_banks = omap1510_irq_banks; irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); } + if (cpu_is_omap310()) { + irq_banks = omap310_irq_banks; + irq_bank_count = ARRAY_SIZE(omap310_irq_banks); + } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { @@ -226,9 +235,11 @@ void __init omap_init_irq(void) } /* Unmask level 2 handler */ - if (cpu_is_omap730()) { + + if (cpu_is_omap730()) omap_unmask_irq(INT_730_IH2_IRQ); - } else { - omap_unmask_irq(INT_IH2_IRQ); - } + else if (cpu_is_omap1510()) + omap_unmask_irq(INT_1510_IH2_IRQ); + else if (cpu_is_omap16xx()) + omap_unmask_irq(INT_1610_IH2_IRQ); } diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index be283cda63dd..650650815915 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -13,12 +13,12 @@ #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> -#include <linux/version.h> #include <asm/io.h> #include <asm/hardware.h> #include <asm/leds.h> #include <asm/system.h> +#include <asm/mach-types.h> #include <asm/arch/fpga.h> #include <asm/arch/gpio.h> @@ -64,14 +64,19 @@ void h2p2_dbg_leds_event(led_event_t evt) case led_stop: case led_halted: /* all leds off during suspend or shutdown */ - omap_set_gpio_dataout(GPIO_TIMER, 0); - omap_set_gpio_dataout(GPIO_IDLE, 0); + + if (! machine_is_omap_perseus2()) { + omap_set_gpio_dataout(GPIO_TIMER, 0); + omap_set_gpio_dataout(GPIO_IDLE, 0); + } + __raw_writew(~0, &fpga->leds); led_state &= ~LED_STATE_ENABLED; if (evt == led_halted) { iounmap(fpga); fpga = NULL; } + goto done; case led_claim: @@ -86,18 +91,37 @@ void h2p2_dbg_leds_event(led_event_t evt) #ifdef CONFIG_LEDS_TIMER case led_timer: led_state ^= LED_TIMER_ON; - omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON); - goto done; + + if (machine_is_omap_perseus2()) + hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER; + else { + omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON); + goto done; + } + + break; #endif #ifdef CONFIG_LEDS_CPU case led_idle_start: - omap_set_gpio_dataout(GPIO_IDLE, 1); - goto done; + if (machine_is_omap_perseus2()) + hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE; + else { + omap_set_gpio_dataout(GPIO_IDLE, 1); + goto done; + } + + break; case led_idle_end: - omap_set_gpio_dataout(GPIO_IDLE, 0); - goto done; + if (machine_is_omap_perseus2()) + hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE; + else { + omap_set_gpio_dataout(GPIO_IDLE, 0); + goto done; + } + + break; #endif case led_green_on: @@ -136,7 +160,7 @@ void h2p2_dbg_leds_event(led_event_t evt) /* * Actually burn the LEDs */ - if (led_state & LED_STATE_CLAIMED) + if (led_state & LED_STATE_ENABLED) __raw_writew(~hw_led_state, &fpga->leds); done: diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 5c6b1bb6e722..3f9dcac4fd41 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -33,7 +33,6 @@ omap_leds_init(void) if (machine_is_omap_h2() || machine_is_omap_h3() - || machine_is_omap_perseus2() #ifdef CONFIG_OMAP_OSK_MISTRAL || machine_is_omap_osk() #endif diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c new file mode 100644 index 000000000000..d4b8d624e742 --- /dev/null +++ b/arch/arm/mach-omap1/mux.c @@ -0,0 +1,289 @@ +/* + * linux/arch/arm/mach-omap1/mux.c + * + * OMAP1 pin multiplexing configurations + * + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/spinlock.h> + +#include <asm/arch/mux.h> + +#ifdef CONFIG_OMAP_MUX + +#ifdef CONFIG_ARCH_OMAP730 +struct pin_config __initdata_or_module omap730_pins[] = { +MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 0, 20, 1, NA, 0, 0) +MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 0, 24, 1, NA, 0, 0) +MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 0, 28, 1, NA, 0, 0) +MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 0, 1, NA, 0, 0) +MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 0, 4, 1, NA, 0, 0) +MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 0, 8, 1, NA, 0, 0) +MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 0, 12, 1, NA, 0, 0) +MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 0, 16, 1, NA, 0, 0) +MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 0, 20, 1, NA, 0, 0) +MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 0, 24, 1, NA, 0, 0) +}; +#endif + +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) +struct pin_config __initdata_or_module omap1xxx_pins[] = { +/* + * description mux mode mux pull pull pull pu_pd pu dbg + * reg offset mode reg bit ena reg + */ +MUX_CFG("UART1_TX", 9, 21, 1, 2, 3, 0, NA, 0, 0) +MUX_CFG("UART1_RTS", 9, 12, 1, 2, 0, 0, NA, 0, 0) + +/* UART2 (COM_UART_GATING), conflicts with USB2 */ +MUX_CFG("UART2_TX", C, 27, 1, 3, 3, 0, NA, 0, 0) +MUX_CFG("UART2_RX", C, 18, 0, 3, 1, 1, NA, 0, 0) +MUX_CFG("UART2_CTS", C, 21, 0, 3, 1, 1, NA, 0, 0) +MUX_CFG("UART2_RTS", C, 24, 1, 3, 2, 0, NA, 0, 0) + +/* UART3 (GIGA_UART_GATING) */ +MUX_CFG("UART3_TX", 6, 0, 1, 0, 30, 0, NA, 0, 0) +MUX_CFG("UART3_RX", 6, 3, 0, 0, 31, 1, NA, 0, 0) +MUX_CFG("UART3_CTS", 5, 12, 2, 0, 24, 0, NA, 0, 0) +MUX_CFG("UART3_RTS", 5, 15, 2, 0, 25, 0, NA, 0, 0) +MUX_CFG("UART3_CLKREQ", 9, 27, 0, 2, 5, 0, NA, 0, 0) +MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0) +MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0) + +/* PWT & PWL, conflicts with UART3 */ +MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0) +MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0) + +/* USB internal master generic */ +MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1) +MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1) +/* works around erratum: W4_USB_PUEN and W4_USB_PUDIS are switched! */ +MUX_CFG("W4_USB_PUEN", D, 3, 3, 3, 5, 1, NA, 0, 1) +MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1) +MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1) +MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1) + +/* USB1 master */ +MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1) +MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1) +MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1) +MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1) +MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1) +MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1) +MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1) +MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1) +MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1) +MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1) +MUX_CFG("R13_1710_USB1_SEO", A, 12, 5, 2, 10, 0, NA, 0, 1) + +/* USB2 master */ +MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1) +MUX_CFG("USB2_VP", B, 6, 1, 2, 18, 0, NA, 0, 1) +MUX_CFG("USB2_TXEN", B, 9, 1, 2, 19, 0, NA, 0, 1) +MUX_CFG("USB2_VM", C, 18, 1, 3, 0, 0, NA, 0, 1) +MUX_CFG("USB2_RCV", C, 21, 1, 3, 1, 0, NA, 0, 1) +MUX_CFG("USB2_SE0", C, 24, 2, 3, 2, 0, NA, 0, 1) +MUX_CFG("USB2_TXD", C, 27, 2, 3, 3, 0, NA, 0, 1) + +/* OMAP-1510 GPIO */ +MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1) +MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1) +MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1) + +/* OMAP1610 GPIO */ +MUX_CFG("P18_1610_GPIO3", 7, 0, 0, 1, 8, 0, NA, 0, 1) +MUX_CFG("Y15_1610_GPIO17", A, 0, 7, 2, 6, 0, NA, 0, 1) + +/* OMAP-1710 GPIO */ +MUX_CFG("R18_1710_GPIO0", 7, 9, 0, 1, 11, 1, 1, 1, 1) +MUX_CFG("V2_1710_GPIO10", F, 27, 1, 4, 3, 1, 4, 1, 1) +MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1) +MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1) + +/* MPUIO */ +MUX_CFG("MPUIO2", 7, 18, 0, 1, 14, 1, NA, 0, 1) +MUX_CFG("N15_1610_MPUIO2", 7, 18, 0, 1, 14, 1, 1, 0, 1) +MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1) +MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1) + +MUX_CFG("T20_1610_MPUIO5", 7, 12, 0, 1, 12, 0, 3, 0, 1) +MUX_CFG("W11_1610_MPUIO6", 10, 15, 2, 3, 8, 0, 3, 0, 1) +MUX_CFG("V10_1610_MPUIO7", A, 24, 2, 2, 14, 0, 2, 0, 1) +MUX_CFG("W11_1610_MPUIO9", 10, 15, 1, 3, 8, 0, 3, 0, 1) +MUX_CFG("V10_1610_MPUIO10", A, 24, 1, 2, 14, 0, 2, 0, 1) +MUX_CFG("W10_1610_MPUIO11", A, 18, 2, 2, 11, 0, 2, 0, 1) +MUX_CFG("E20_1610_MPUIO13", 3, 21, 1, 0, 7, 0, 0, 0, 1) +MUX_CFG("U20_1610_MPUIO14", 9, 6, 6, 0, 30, 0, 0, 0, 1) +MUX_CFG("E19_1610_MPUIO15", 3, 18, 1, 0, 6, 0, 0, 0, 1) + +/* MCBSP2 */ +MUX_CFG("MCBSP2_CLKR", C, 6, 0, 2, 27, 1, NA, 0, 1) +MUX_CFG("MCBSP2_CLKX", C, 9, 0, 2, 29, 1, NA, 0, 1) +MUX_CFG("MCBSP2_DR", C, 0, 0, 2, 26, 1, NA, 0, 1) +MUX_CFG("MCBSP2_DX", C, 15, 0, 2, 31, 1, NA, 0, 1) +MUX_CFG("MCBSP2_FSR", C, 12, 0, 2, 30, 1, NA, 0, 1) +MUX_CFG("MCBSP2_FSX", C, 3, 0, 2, 27, 1, NA, 0, 1) + +/* MCBSP3 NOTE: Mode must 1 for clock */ +MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1) + +/* Misc ballouts */ +MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1) +MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0) + +/* OMAP-1610 MMC2 */ +MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1) +MUX_CFG("V8_1610_MMC2_DAT1", B, 27, 6, 2, 25, 1, 2, 1, 1) +MUX_CFG("W15_1610_MMC2_DAT2", 9, 12, 6, 2, 5, 1, 2, 1, 1) +MUX_CFG("R10_1610_MMC2_DAT3", B, 18, 6, 2, 22, 1, 2, 1, 1) +MUX_CFG("Y10_1610_MMC2_CLK", B, 3, 6, 2, 17, 0, 2, 0, 1) +MUX_CFG("Y8_1610_MMC2_CMD", B, 24, 6, 2, 24, 1, 2, 1, 1) +MUX_CFG("V9_1610_MMC2_CMDDIR", B, 12, 6, 2, 20, 0, 2, 1, 1) +MUX_CFG("V5_1610_MMC2_DATDIR0", B, 15, 6, 2, 21, 0, 2, 1, 1) +MUX_CFG("W19_1610_MMC2_DATDIR1", 8, 15, 6, 1, 23, 0, 1, 1, 1) +MUX_CFG("R18_1610_MMC2_CLKIN", 7, 9, 6, 1, 11, 0, 1, 11, 1) + +/* OMAP-1610 External Trace Interface */ +MUX_CFG("M19_1610_ETM_PSTAT0", 5, 27, 1, 0, 29, 0, 0, 0, 1) +MUX_CFG("L15_1610_ETM_PSTAT1", 5, 24, 1, 0, 28, 0, 0, 0, 1) +MUX_CFG("L18_1610_ETM_PSTAT2", 5, 21, 1, 0, 27, 0, 0, 0, 1) +MUX_CFG("L19_1610_ETM_D0", 5, 18, 1, 0, 26, 0, 0, 0, 1) +MUX_CFG("J19_1610_ETM_D6", 5, 0, 1, 0, 20, 0, 0, 0, 1) +MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1) + +/* OMAP16XX GPIO */ +MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1) +MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1) +MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1) +MUX_CFG("N20_1610_GPIO11", 6, 18, 0, 1, 4, 0, 1, 1, 1) +MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1) +MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1) +MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1) +MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1) +MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1) +MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1) +MUX_CFG("V14_16XX_GPIO37", 9, 18, 7, 2, 2, 0, 2, 2, 0) +MUX_CFG("R9_16XX_GPIO18", C, 18, 7, 3, 0, 0, 3, 0, 0) +MUX_CFG("L14_16XX_GPIO49", 6, 3, 7, 0, 31, 0, 0, 31, 0) + +/* OMAP-1610 uWire */ +MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1) +MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1) +MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1) +MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) +MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) +MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1) + +/* OMAP-1610 Flash */ +MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1) + +/* First MMC interface, same on 1510, 1610 and 1710 */ +MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1) +MUX_CFG("MMC_DAT1", A, 24, 0, 2, 14, 1, 2, 1, 1) +MUX_CFG("MMC_DAT2", A, 18, 0, 2, 12, 1, 2, 1, 1) +MUX_CFG("MMC_DAT0", B, 0, 0, 2, 16, 1, 2, 1, 1) +MUX_CFG("MMC_CLK", A, 21, 0, NA, 0, 0, NA, 0, 1) +MUX_CFG("MMC_DAT3", 10, 15, 0, 3, 8, 1, 3, 1, 1) +MUX_CFG("M15_1710_MMC_CLKI", 6, 21, 2, 0, 0, 0, NA, 0, 1) +MUX_CFG("P19_1710_MMC_CMDDIR", 6, 24, 6, 0, 0, 0, NA, 0, 1) +MUX_CFG("P20_1710_MMC_DATDIR0", 6, 27, 5, 0, 0, 0, NA, 0, 1) + +/* OMAP-1610 USB0 alternate configuration */ +MUX_CFG("W9_USB0_TXEN", B, 9, 5, 2, 19, 0, 2, 0, 1) +MUX_CFG("AA9_USB0_VP", B, 6, 5, 2, 18, 0, 2, 0, 1) +MUX_CFG("Y5_USB0_RCV", C, 21, 5, 3, 1, 0, 1, 0, 1) +MUX_CFG("R9_USB0_VM", C, 18, 5, 3, 0, 0, 3, 0, 1) +MUX_CFG("V6_USB0_TXD", C, 27, 5, 3, 3, 0, 3, 0, 1) +MUX_CFG("W5_USB0_SE0", C, 24, 5, 3, 2, 0, 3, 0, 1) +MUX_CFG("V9_USB0_SPEED", B, 12, 5, 2, 20, 0, 2, 0, 1) +MUX_CFG("Y10_USB0_SUSP", B, 3, 5, 2, 17, 0, 2, 0, 1) + +/* USB2 interface */ +MUX_CFG("W9_USB2_TXEN", B, 9, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("AA9_USB2_VP", B, 6, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("Y5_USB2_RCV", C, 21, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("R9_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("V6_USB2_TXD", C, 27, 2, NA, 0, 0, NA, 0, 1) +MUX_CFG("W5_USB2_SE0", C, 24, 2, NA, 0, 0, NA, 0, 1) + +/* 16XX UART */ +MUX_CFG("R13_1610_UART1_TX", A, 12, 6, 2, 10, 0, 2, 10, 1) +MUX_CFG("V14_16XX_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1) +MUX_CFG("R14_1610_UART1_CTS", 9, 15, 0, 2, 1, 0, 2, 1, 1) +MUX_CFG("AA15_1610_UART1_RTS", 9, 12, 1, 2, 0, 0, 2, 0, 1) +MUX_CFG("R9_16XX_UART2_RX", C, 18, 0, 3, 0, 0, 3, 0, 1) +MUX_CFG("L14_16XX_UART3_RX", 6, 3, 0, 0, 31, 0, 0, 31, 1) + +/* I2C interface */ +MUX_CFG("I2C_SCL", 7, 24, 0, NA, 0, 0, NA, 0, 0) +MUX_CFG("I2C_SDA", 7, 27, 0, NA, 0, 0, NA, 0, 0) + +/* Keypad */ +MUX_CFG("F18_1610_KBC0", 3, 15, 0, 0, 5, 1, 0, 0, 0) +MUX_CFG("D20_1610_KBC1", 3, 12, 0, 0, 4, 1, 0, 0, 0) +MUX_CFG("D19_1610_KBC2", 3, 9, 0, 0, 3, 1, 0, 0, 0) +MUX_CFG("E18_1610_KBC3", 3, 6, 0, 0, 2, 1, 0, 0, 0) +MUX_CFG("C21_1610_KBC4", 3, 3, 0, 0, 1, 1, 0, 0, 0) +MUX_CFG("G18_1610_KBR0", 4, 0, 0, 0, 10, 1, 0, 1, 0) +MUX_CFG("F19_1610_KBR1", 3, 27, 0, 0, 9, 1, 0, 1, 0) +MUX_CFG("H14_1610_KBR2", 3, 24, 0, 0, 8, 1, 0, 1, 0) +MUX_CFG("E20_1610_KBR3", 3, 21, 0, 0, 7, 1, 0, 1, 0) +MUX_CFG("E19_1610_KBR4", 3, 18, 0, 0, 6, 1, 0, 1, 0) +MUX_CFG("N19_1610_KBR5", 6, 12, 1, 1, 2, 1, 1, 1, 0) + +/* Power management */ +MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, NA, 0, 0, NA, 0, 0) + +/* MCLK Settings */ +MUX_CFG("V5_1710_MCLK_ON", B, 15, 0, NA, 0, 0, NA, 0, 0) +MUX_CFG("V5_1710_MCLK_OFF", B, 15, 6, NA, 0, 0, NA, 0, 0) +MUX_CFG("R10_1610_MCLK_ON", B, 18, 0, NA, 22, 0, NA, 1, 0) +MUX_CFG("R10_1610_MCLK_OFF", B, 18, 6, 2, 22, 1, 2, 1, 1) + +/* CompactFlash controller, conflicts with MMC1 */ +MUX_CFG("P11_1610_CF_CD2", A, 27, 3, 2, 15, 1, 2, 1, 1) +MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1) +MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1) +MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1) +MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1) +}; +#endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */ + +int __init omap1_mux_init(void) +{ + +#ifdef CONFIG_ARCH_OMAP730 + omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins)); +#endif + +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) + omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins)); +#endif + + return 0; +} + +#endif diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 40c4f7c40e73..6810cfb84462 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -109,9 +109,10 @@ static struct platform_device serial_device = { * By default UART2 does not work on Innovator-1510 if you have * USB OHCI enabled. To use UART2, you must disable USB2 first. */ -void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) +void __init omap_serial_init(void) { int i; + const struct omap_uart_config *info; if (cpu_is_omap730()) { serial_platform_data[0].regshift = 0; @@ -126,10 +127,14 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; } + info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + if (info == NULL) + return; + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { unsigned char reg; - if (ports[i] == 0) { + if (!((1 << i) & info->enabled_uarts)) { serial_platform_data[i].membase = NULL; serial_platform_data[i].mapbase = 0; continue; diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 191a9b1ee9b7..cdbf4d7620c6 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -226,8 +226,8 @@ unsigned long long sched_clock(void) #ifdef CONFIG_OMAP_32K_TIMER -#ifdef CONFIG_ARCH_OMAP1510 -#error OMAP 32KHz timer does not currently work on 1510! +#ifdef CONFIG_ARCH_OMAP15XX +#error OMAP 32KHz timer does not currently work on 15XX! #endif /* diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig new file mode 100644 index 000000000000..578880943cf2 --- /dev/null +++ b/arch/arm/mach-omap2/Kconfig @@ -0,0 +1,22 @@ +comment "OMAP Core Type" + depends on ARCH_OMAP2 + +config ARCH_OMAP24XX + bool "OMAP24xx Based System" + depends on ARCH_OMAP2 + +config ARCH_OMAP2420 + bool "OMAP2420 support" + depends on ARCH_OMAP24XX + +comment "OMAP Board Type" + depends on ARCH_OMAP2 + +config MACH_OMAP_GENERIC + bool "Generic OMAP board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + +config MACH_OMAP_H4 + bool "OMAP 2420 H4 board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile new file mode 100644 index 000000000000..42041166435c --- /dev/null +++ b/arch/arm/mach-omap2/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o + +obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o + +# Specific board support +obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o +obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o + diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot new file mode 100644 index 000000000000..565aff7f37a9 --- /dev/null +++ b/arch/arm/mach-omap2/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x80008000 +params_phys-y := 0x80000100 +initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c new file mode 100644 index 000000000000..c602e7a3d93e --- /dev/null +++ b/arch/arm/mach-omap2/board-generic.c @@ -0,0 +1,80 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-generic.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Modified from mach-omap/omap1/board-generic.c + * + * Code for generic OMAP2 board. Should work on many OMAP2 systems where + * the bootloader passes the board-specific data to the kernel. + * Do not put any board specific code to this file; create a new machine + * type if you need custom low-level initializations. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> + +static void __init omap_generic_init_irq(void) +{ + omap_init_irq(); +} + +static struct omap_uart_config generic_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config generic_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_board_config_kernel generic_config[] = { + { OMAP_TAG_UART, &generic_uart_config }, + { OMAP_TAG_MMC, &generic_mmc_config }, +}; + +static void __init omap_generic_init(void) +{ + omap_board_config = generic_config; + omap_board_config_size = ARRAY_SIZE(generic_config); + omap_serial_init(); +} + +static void __init omap_generic_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c new file mode 100644 index 000000000000..f2554469a76a --- /dev/null +++ b/arch/arm/mach-omap2/board-h4.c @@ -0,0 +1,197 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-h4.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Modified from mach-omap/omap1/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/arch/prcm.h> + +#include <asm/io.h> +#include <asm/delay.h> + +static struct mtd_partition h4_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data h4_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = h4_partitions, + .nr_parts = ARRAY_SIZE(h4_partitions), +}; + +static struct resource h4_flash_resource = { + .start = H4_CS0_BASE, + .end = H4_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device h4_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &h4_flash_data, + }, + .num_resources = 1, + .resource = &h4_flash_resource, +}; + +static struct resource h4_smc91x_resources[] = { + [0] = { + .start = OMAP24XX_ETHR_START, /* Physical */ + .end = OMAP24XX_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h4_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(h4_smc91x_resources), + .resource = h4_smc91x_resources, +}; + +static struct platform_device *h4_devices[] __initdata = { + &h4_smc91x_device, + &h4_flash_device, +}; + +static inline void __init h4_init_smc91x(void) +{ + /* Make sure CS1 timings are correct */ + GPMC_CONFIG1_1 = 0x00011200; + GPMC_CONFIG2_1 = 0x001f1f01; + GPMC_CONFIG3_1 = 0x00080803; + GPMC_CONFIG4_1 = 0x1c091c09; + GPMC_CONFIG5_1 = 0x041f1f1f; + GPMC_CONFIG6_1 = 0x000004c4; + GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24); + udelay(100); + + omap_cfg_reg(M15_24XX_GPIO92); + if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + OMAP24XX_ETHR_GPIO_IRQ); + return; + } + omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); +} + +static void __init omap_h4_init_irq(void) +{ + omap_init_irq(); + omap_gpio_init(); + h4_init_smc91x(); +} + +static struct omap_uart_config h4_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config h4_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config h4_lcd_config __initdata = { + .panel_name = "h4", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel h4_config[] = { + { OMAP_TAG_UART, &h4_uart_config }, + { OMAP_TAG_MMC, &h4_mmc_config }, + { OMAP_TAG_LCD, &h4_lcd_config }, +}; + +static void __init omap_h4_init(void) +{ + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); + omap_board_config = h4_config; + omap_board_config_size = ARRAY_SIZE(h4_config); + omap_serial_init(); +} + +static void __init omap_h4_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_H4, "OMAP2420 H4 board") + /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_h4_map_io, + .init_irq = omap_h4_init_irq, + .init_machine = omap_h4_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c new file mode 100644 index 000000000000..85818d9f2635 --- /dev/null +++ b/arch/arm/mach-omap2/clock.c @@ -0,0 +1,1129 @@ +/* + * linux/arch/arm/mach-omap2/clock.c + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * Created for OMAP2. + * + * Cleaned up and modified to use omap shared clock framework by + * Tony Lindgren <tony@atomide.com> + * + * Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> + +#include <asm/io.h> + +#include <asm/hardware/clock.h> +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> +#include <asm/arch/prcm.h> + +#include "clock.h" + +//#define DOWN_VARIABLE_DPLL 1 /* Experimental */ + +static struct prcm_config *curr_prcm_set; +static struct memory_timings mem_timings; +static u32 curr_perf_level = PRCM_FULL_SPEED; + +/*------------------------------------------------------------------------- + * Omap2 specific clock functions + *-------------------------------------------------------------------------*/ + +/* Recalculate SYST_CLK */ +static void omap2_sys_clk_recalc(struct clk * clk) +{ + u32 div = PRCM_CLKSRC_CTRL; + div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ + div >>= clk->rate_offset; + clk->rate = (clk->parent->rate / div); + propagate_rate(clk); +} + +static u32 omap2_get_dpll_rate(struct clk * tclk) +{ + int dpll_clk, dpll_mult, dpll_div, amult; + + dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */ + dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */ + dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1); + amult = CM_CLKSEL2_PLL & 0x3; + dpll_clk *= amult; + + return dpll_clk; +} + +static void omap2_followparent_recalc(struct clk *clk) +{ + followparent_recalc(clk); +} + +static void omap2_propagate_rate(struct clk * clk) +{ + if (!(clk->flags & RATE_FIXED)) + clk->rate = clk->parent->rate; + + propagate_rate(clk); +} + +/* Enable an APLL if off */ +static void omap2_clk_fixed_enable(struct clk *clk) +{ + u32 cval, i=0; + + if (clk->enable_bit == 0xff) /* Parent will do it */ + return; + + cval = CM_CLKEN_PLL; + + if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit)) + return; + + cval &= ~(0x3 << clk->enable_bit); + cval |= (0x3 << clk->enable_bit); + CM_CLKEN_PLL = cval; + + if (clk == &apll96_ck) + cval = (1 << 8); + else if (clk == &apll54_ck) + cval = (1 << 6); + + while (!CM_IDLEST_CKGEN & cval) { /* Wait for lock */ + ++i; + udelay(1); + if (i == 100000) + break; + } +} + +/* Enables clock without considering parent dependencies or use count + * REVISIT: Maybe change this to use clk->enable like on omap1? + */ +static int omap2_clk_enable(struct clk * clk) +{ + u32 regval32; + + if (clk->flags & ALWAYS_ENABLED) + return 0; + + if (unlikely(clk->enable_reg == 0)) { + printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + clk->name); + return 0; + } + + if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) { + omap2_clk_fixed_enable(clk); + return 0; + } + + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + + return 0; +} + +/* Stop APLL */ +static void omap2_clk_fixed_disable(struct clk *clk) +{ + u32 cval; + + if(clk->enable_bit == 0xff) /* let parent off do it */ + return; + + cval = CM_CLKEN_PLL; + cval &= ~(0x3 << clk->enable_bit); + CM_CLKEN_PLL = cval; +} + +/* Disables clock without considering parent dependencies or use count */ +static void omap2_clk_disable(struct clk *clk) +{ + u32 regval32; + + if (clk->enable_reg == 0) + return; + + if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) { + omap2_clk_fixed_disable(clk); + return; + } + + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); +} + +static int omap2_clk_use(struct clk *clk) +{ + int ret = 0; + + if (clk->usecount++ == 0) { + if (likely((u32)clk->parent)) + ret = omap2_clk_use(clk->parent); + + if (unlikely(ret != 0)) { + clk->usecount--; + return ret; + } + + ret = omap2_clk_enable(clk); + + if (unlikely(ret != 0) && clk->parent) { + omap2_clk_unuse(clk->parent); + clk->usecount--; + } + } + + return ret; +} + +static void omap2_clk_unuse(struct clk *clk) +{ + if (clk->usecount > 0 && !(--clk->usecount)) { + omap2_clk_disable(clk); + if (likely((u32)clk->parent)) + omap2_clk_unuse(clk->parent); + } +} + +/* + * Uses the current prcm set to tell if a rate is valid. + * You can go slower, but not faster within a given rate set. + */ +static u32 omap2_dpll_round_rate(unsigned long target_rate) +{ + u32 high, low; + + if ((CM_CLKSEL2_PLL & 0x3) == 1) { /* DPLL clockout */ + high = curr_prcm_set->dpll_speed * 2; + low = curr_prcm_set->dpll_speed; + } else { /* DPLL clockout x 2 */ + high = curr_prcm_set->dpll_speed; + low = curr_prcm_set->dpll_speed / 2; + } + +#ifdef DOWN_VARIABLE_DPLL + if (target_rate > high) + return high; + else + return target_rate; +#else + if (target_rate > low) + return high; + else + return low; +#endif + +} + +/* + * Used for clocks that are part of CLKSEL_xyz governed clocks. + * REVISIT: Maybe change to use clk->enable() functions like on omap1? + */ +static void omap2_clksel_recalc(struct clk * clk) +{ + u32 fixed = 0, div = 0; + + if (clk == &dpll_ck) { + clk->rate = omap2_get_dpll_rate(clk); + fixed = 1; + div = 0; + } + + if (clk == &iva1_mpu_int_ifck) { + div = 2; + fixed = 1; + } + + if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) { + clk->rate = sys_ck.rate; + return; + } + + if (!fixed) { + div = omap2_clksel_get_divisor(clk); + if (div == 0) + return; + } + + if (div != 0) { + if (unlikely(clk->rate == clk->parent->rate / div)) + return; + clk->rate = clk->parent->rate / div; + } + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +/* + * Finds best divider value in an array based on the source and target + * rates. The divider array must be sorted with smallest divider first. + */ +static inline u32 omap2_divider_from_table(u32 size, u32 *div_array, + u32 src_rate, u32 tgt_rate) +{ + int i, test_rate; + + if (div_array == NULL) + return ~1; + + for (i=0; i < size; i++) { + test_rate = src_rate / *div_array; + if (test_rate <= tgt_rate) + return *div_array; + ++div_array; + } + + return ~0; /* No acceptable divider */ +} + +/* + * Find divisor for the given clock and target rate. + * + * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, + * they are only settable as part of virtual_prcm set. + */ +static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate, + u32 *new_div) +{ + u32 gfx_div[] = {2, 3, 4}; + u32 sysclkout_div[] = {1, 2, 4, 8, 16}; + u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16}; + u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18}; + u32 best_div = ~0, asize = 0; + u32 *div_array = NULL; + + switch (tclk->flags & SRC_RATE_SEL_MASK) { + case CM_GFX_SEL1: + asize = 3; + div_array = gfx_div; + break; + case CM_PLL_SEL1: + return omap2_dpll_round_rate(target_rate); + case CM_SYSCLKOUT_SEL1: + asize = 5; + div_array = sysclkout_div; + break; + case CM_CORE_SEL1: + if(tclk == &dss1_fck){ + if(tclk->parent == &core_ck){ + asize = 10; + div_array = dss1_div; + } else { + *new_div = 0; /* fixed clk */ + return(tclk->parent->rate); + } + } else if((tclk == &vlynq_fck) && cpu_is_omap2420()){ + if(tclk->parent == &core_ck){ + asize = 10; + div_array = vylnq_div; + } else { + *new_div = 0; /* fixed clk */ + return(tclk->parent->rate); + } + } + break; + } + + best_div = omap2_divider_from_table(asize, div_array, + tclk->parent->rate, target_rate); + if (best_div == ~0){ + *new_div = 1; + return best_div; /* signal error */ + } + + *new_div = best_div; + return (tclk->parent->rate / best_div); +} + +/* Given a clock and a rate apply a clock specific rounding function */ +static long omap2_clk_round_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div = 0; + int valid_rate; + + if (clk->flags & RATE_FIXED) + return clk->rate; + + if (clk->flags & RATE_CKCTL) { + valid_rate = omap2_clksel_round_rate(clk, rate, &new_div); + return valid_rate; + } + + if (clk->round_rate != 0) + return clk->round_rate(clk, rate); + + return clk->rate; +} + +/* + * Check the DLL lock state, and return tue if running in unlock mode. + * This is needed to compenste for the shifted DLL value in unlock mode. + */ +static u32 omap2_dll_force_needed(void) +{ + u32 dll_state = SDRC_DLLA_CTRL; /* dlla and dllb are a set */ + + if ((dll_state & (1 << 2)) == (1 << 2)) + return 1; + else + return 0; +} + +static void omap2_init_memory_params(u32 force_lock_to_unlock_mode) +{ + unsigned long dll_cnt; + u32 fast_dll = 0; + + mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ + + /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. + * In the case of 2422, its ok to use CS1 instead of CS0. + */ + +#if 0 /* FIXME: Enable after 24xx cpu detection works */ + ctype = get_cpu_type(); + if (cpu_is_omap2422()) + mem_timings.base_cs = 1; + else +#endif + mem_timings.base_cs = 0; + + if (mem_timings.m_type != M_DDR) + return; + + /* With DDR we need to determine the low frequency DLL value */ + if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL)) + mem_timings.dll_mode = M_UNLOCK; + else + mem_timings.dll_mode = M_LOCK; + + if (mem_timings.base_cs == 0) { + fast_dll = SDRC_DLLA_CTRL; + dll_cnt = SDRC_DLLA_STATUS & 0xff00; + } else { + fast_dll = SDRC_DLLB_CTRL; + dll_cnt = SDRC_DLLB_STATUS & 0xff00; + } + if (force_lock_to_unlock_mode) { + fast_dll &= ~0xff00; + fast_dll |= dll_cnt; /* Current lock mode */ + } + mem_timings.fast_dll_ctrl = fast_dll; + + /* No disruptions, DDR will be offline & C-ABI not followed */ + omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl, + mem_timings.fast_dll_ctrl, + mem_timings.base_cs, + force_lock_to_unlock_mode); + mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */ + + /* Turn status into unlock ctrl */ + mem_timings.slow_dll_ctrl |= + ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); + + /* 90 degree phase for anything below 133Mhz */ + mem_timings.slow_dll_ctrl |= (1 << 1); +} + +static u32 omap2_reprogram_sdrc(u32 level, u32 force) +{ + u32 prev = curr_perf_level, flags; + + if ((curr_perf_level == level) && !force) + return prev; + + if (level == PRCM_HALF_SPEED) { + local_irq_save(flags); + PRCM_VOLTSETUP = 0xffff; + omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED, + mem_timings.slow_dll_ctrl, + mem_timings.m_type); + curr_perf_level = PRCM_HALF_SPEED; + local_irq_restore(flags); + } + if (level == PRCM_FULL_SPEED) { + local_irq_save(flags); + PRCM_VOLTSETUP = 0xffff; + omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED, + mem_timings.fast_dll_ctrl, + mem_timings.m_type); + curr_perf_level = PRCM_FULL_SPEED; + local_irq_restore(flags); + } + + return prev; +} + +static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate) +{ + u32 flags, cur_rate, low, mult, div, valid_rate, done_rate; + u32 bypass = 0; + struct prcm_config tmpset; + int ret = -EINVAL; + + local_irq_save(flags); + cur_rate = omap2_get_dpll_rate(&dpll_ck); + mult = CM_CLKSEL2_PLL & 0x3; + + if ((rate == (cur_rate / 2)) && (mult == 2)) { + omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); + } else if ((rate == (cur_rate * 2)) && (mult == 1)) { + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + } else if (rate != cur_rate) { + valid_rate = omap2_dpll_round_rate(rate); + if (valid_rate != rate) + goto dpll_exit; + + if ((CM_CLKSEL2_PLL & 0x3) == 1) + low = curr_prcm_set->dpll_speed; + else + low = curr_prcm_set->dpll_speed / 2; + + tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL; + tmpset.cm_clksel1_pll &= ~(0x3FFF << 8); + div = ((curr_prcm_set->xtal_speed / 1000000) - 1); + tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL; + tmpset.cm_clksel2_pll &= ~0x3; + if (rate > low) { + tmpset.cm_clksel2_pll |= 0x2; + mult = ((rate / 2) / 1000000); + done_rate = PRCM_FULL_SPEED; + } else { + tmpset.cm_clksel2_pll |= 0x1; + mult = (rate / 1000000); + done_rate = PRCM_HALF_SPEED; + } + tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12)); + + /* Worst case */ + tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS; + + if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ + bypass = 1; + + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */ + + /* Force dll lock mode */ + omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, + bypass); + + /* Errata: ret dll entry state */ + omap2_init_memory_params(omap2_dll_force_needed()); + omap2_reprogram_sdrc(done_rate, 0); + } + omap2_clksel_recalc(&dpll_ck); + ret = 0; + +dpll_exit: + local_irq_restore(flags); + return(ret); +} + +/* Just return the MPU speed */ +static void omap2_mpu_recalc(struct clk * clk) +{ + clk->rate = curr_prcm_set->mpu_speed; +} + +/* + * Look for a rate equal or less than the target rate given a configuration set. + * + * What's not entirely clear is "which" field represents the key field. + * Some might argue L3-DDR, others ARM, others IVA. This code is simple and + * just uses the ARM rates. + */ +static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate) +{ + struct prcm_config * ptr; + long highest_rate; + + if (clk != &virt_prcm_set) + return -EINVAL; + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->mpu_speed; ptr++) { + if (ptr->xtal_speed != sys_ck.rate) + continue; + + highest_rate = ptr->mpu_speed; + + /* Can check only after xtal frequency check */ + if (ptr->mpu_speed <= rate) + break; + } + return highest_rate; +} + +/* + * omap2_convert_field_to_div() - turn field value into integer divider + */ +static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val) +{ + u32 i; + u32 clkout_array[] = {1, 2, 4, 8, 16}; + + if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) { + for (i = 0; i < 5; i++) { + if (field_val == i) + return clkout_array[i]; + } + return ~0; + } else + return field_val; +} + +/* + * Returns the CLKSEL divider register value + * REVISIT: This should be cleaned up to work nicely with void __iomem * + */ +static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask, + struct clk *clk) +{ + int ret = ~0; + u32 reg_val, div_off; + u32 div_addr = 0; + u32 mask = ~0; + + div_off = clk->rate_offset; + + switch ((*div_sel & SRC_RATE_SEL_MASK)) { + case CM_MPU_SEL1: + div_addr = (u32)&CM_CLKSEL_MPU; + mask = 0x1f; + break; + case CM_DSP_SEL1: + div_addr = (u32)&CM_CLKSEL_DSP; + if (cpu_is_omap2420()) { + if ((div_off == 0) || (div_off == 8)) + mask = 0x1f; + else if (div_off == 5) + mask = 0x3; + } else if (cpu_is_omap2430()) { + if (div_off == 0) + mask = 0x1f; + else if (div_off == 5) + mask = 0x3; + } + break; + case CM_GFX_SEL1: + div_addr = (u32)&CM_CLKSEL_GFX; + if (div_off == 0) + mask = 0x7; + break; + case CM_MODEM_SEL1: + div_addr = (u32)&CM_CLKSEL_MDM; + if (div_off == 0) + mask = 0xf; + break; + case CM_SYSCLKOUT_SEL1: + div_addr = (u32)&PRCM_CLKOUT_CTRL; + if ((div_off == 3) || (div_off = 11)) + mask= 0x3; + break; + case CM_CORE_SEL1: + div_addr = (u32)&CM_CLKSEL1_CORE; + switch (div_off) { + case 0: /* l3 */ + case 8: /* dss1 */ + case 15: /* vylnc-2420 */ + case 20: /* ssi */ + mask = 0x1f; break; + case 5: /* l4 */ + mask = 0x3; break; + case 13: /* dss2 */ + mask = 0x1; break; + case 25: /* usb */ + mask = 0xf; break; + } + } + + *field_mask = mask; + + if (unlikely(mask == ~0)) + div_addr = 0; + + *div_sel = div_addr; + + if (unlikely(div_addr == 0)) + return ret; + + /* Isolate field */ + reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off); + + /* Normalize back to divider value */ + reg_val >>= div_off; + + return reg_val; +} + +/* + * Return divider to be applied to parent clock. + * Return 0 on error. + */ +static u32 omap2_clksel_get_divisor(struct clk *clk) +{ + int ret = 0; + u32 div, div_sel, div_off, field_mask, field_val; + + /* isolate control register */ + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + + div_off = clk->rate_offset; + field_val = omap2_get_clksel(&div_sel, &field_mask, clk); + if (div_sel == 0) + return ret; + + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + div = omap2_clksel_to_divisor(div_sel, field_val); + + return div; +} + +/* Set the clock rate for a clock source */ +static int omap2_clk_set_rate(struct clk *clk, unsigned long rate) + +{ + int ret = -EINVAL; + void __iomem * reg; + u32 div_sel, div_off, field_mask, field_val, reg_val, validrate; + u32 new_div = 0; + + if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) { + if (clk == &dpll_ck) + return omap2_reprogram_dpll(clk, rate); + + /* Isolate control register */ + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + div_off = clk->src_offset; + + validrate = omap2_clksel_round_rate(clk, rate, &new_div); + if(validrate != rate) + return(ret); + + field_val = omap2_get_clksel(&div_sel, &field_mask, clk); + if (div_sel == 0) + return ret; + + if(clk->flags & CM_SYSCLKOUT_SEL1){ + switch(new_div){ + case 16: field_val = 4; break; + case 8: field_val = 3; break; + case 4: field_val = 2; break; + case 2: field_val = 1; break; + case 1: field_val = 0; break; + } + } + else + field_val = new_div; + + reg = (void __iomem *)div_sel; + + reg_val = __raw_readl(reg); + reg_val &= ~(field_mask << div_off); + reg_val |= (field_val << div_off); + + __raw_writel(reg_val, reg); + clk->rate = clk->parent->rate / field_val; + + if (clk->flags & DELAYED_APP) + __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); + ret = 0; + } else if (clk->set_rate != 0) + ret = clk->set_rate(clk, rate); + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +/* Converts encoded control register address into a full address */ +static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset, + struct clk *src_clk, u32 *field_mask) +{ + u32 val = ~0, src_reg_addr = 0, mask = 0; + + /* Find target control register.*/ + switch ((*type_to_addr & SRC_RATE_SEL_MASK)) { + case CM_CORE_SEL1: + src_reg_addr = (u32)&CM_CLKSEL1_CORE; + if (reg_offset == 13) { /* DSS2_fclk */ + mask = 0x1; + if (src_clk == &sys_ck) + val = 0; + if (src_clk == &func_48m_ck) + val = 1; + } else if (reg_offset == 8) { /* DSS1_fclk */ + mask = 0x1f; + if (src_clk == &sys_ck) + val = 0; + else if (src_clk == &core_ck) /* divided clock */ + val = 0x10; /* rate needs fixing */ + } else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/ + mask = 0x1F; + if(src_clk == &func_96m_ck) + val = 0; + else if (src_clk == &core_ck) + val = 0x10; + } + break; + case CM_CORE_SEL2: + src_reg_addr = (u32)&CM_CLKSEL2_CORE; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &sys_ck) + val = 0x1; + if (src_clk == &alt_ck) + val = 0x2; + break; + case CM_WKUP_SEL1: + src_reg_addr = (u32)&CM_CLKSEL2_CORE; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &sys_ck) + val = 0x1; + if (src_clk == &alt_ck) + val = 0x2; + break; + case CM_PLL_SEL1: + src_reg_addr = (u32)&CM_CLKSEL1_PLL; + mask = 0x1; + if (reg_offset == 0x3) { + if (src_clk == &apll96_ck) + val = 0; + if (src_clk == &alt_ck) + val = 1; + } + else if (reg_offset == 0x5) { + if (src_clk == &apll54_ck) + val = 0; + if (src_clk == &alt_ck) + val = 1; + } + break; + case CM_PLL_SEL2: + src_reg_addr = (u32)&CM_CLKSEL2_PLL; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &dpll_ck) + val = 0x2; + break; + case CM_SYSCLKOUT_SEL1: + src_reg_addr = (u32)&PRCM_CLKOUT_CTRL; + mask = 0x3; + if (src_clk == &dpll_ck) + val = 0; + if (src_clk == &sys_ck) + val = 1; + if (src_clk == &func_54m_ck) + val = 2; + if (src_clk == &func_96m_ck) + val = 3; + break; + } + + if (val == ~0) /* Catch errors in offset */ + *type_to_addr = 0; + else + *type_to_addr = src_reg_addr; + *field_mask = mask; + + return val; +} + +static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) +{ + void __iomem * reg; + u32 src_sel, src_off, field_val, field_mask, reg_val, rate; + int ret = -EINVAL; + + if (unlikely(clk->flags & CONFIG_PARTICIPANT)) + return ret; + + if (clk->flags & SRC_SEL_MASK) { /* On-chip SEL collection */ + src_sel = (SRC_RATE_SEL_MASK & clk->flags); + src_off = clk->src_offset; + + if (src_sel == 0) + goto set_parent_error; + + field_val = omap2_get_src_field(&src_sel, src_off, new_parent, + &field_mask); + + reg = (void __iomem *)src_sel; + + if (clk->usecount > 0) + omap2_clk_disable(clk); + + /* Set new source value (previous dividers if any in effect) */ + reg_val = __raw_readl(reg) & ~(field_mask << src_off); + reg_val |= (field_val << src_off); + __raw_writel(reg_val, reg); + + if (clk->flags & DELAYED_APP) + __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); + + if (clk->usecount > 0) + omap2_clk_enable(clk); + + clk->parent = new_parent; + + /* SRC_RATE_SEL_MASK clocks follow their parents rates.*/ + if ((new_parent == &core_ck) && (clk == &dss1_fck)) + clk->rate = new_parent->rate / 0x10; + else + clk->rate = new_parent->rate; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); + + return 0; + } else { + clk->parent = new_parent; + rate = new_parent->rate; + omap2_clk_set_rate(clk, rate); + ret = 0; + } + + set_parent_error: + return ret; +} + +/* Sets basic clocks based on the specified rate */ +static int omap2_select_table_rate(struct clk * clk, unsigned long rate) +{ + u32 flags, cur_rate, done_rate, bypass = 0; + u8 cpu_mask = 0; + struct prcm_config *prcm; + unsigned long found_speed = 0; + + if (clk != &virt_prcm_set) + return -EINVAL; + + /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */ + if (cpu_is_omap2420()) + cpu_mask = RATE_IN_242X; + else if (cpu_is_omap2430()) + cpu_mask = RATE_IN_243X; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + + if (prcm->xtal_speed != sys_ck.rate) + continue; + + if (prcm->mpu_speed <= rate) { + found_speed = prcm->mpu_speed; + break; + } + } + + if (!found_speed) { + printk(KERN_INFO "Could not set MPU rate to %luMHz\n", + rate / 1000000); + return -EINVAL; + } + + curr_prcm_set = prcm; + cur_rate = omap2_get_dpll_rate(&dpll_ck); + + if (prcm->dpll_speed == cur_rate / 2) { + omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); + } else if (prcm->dpll_speed == cur_rate * 2) { + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + } else if (prcm->dpll_speed != cur_rate) { + local_irq_save(flags); + + if (prcm->dpll_speed == prcm->xtal_speed) + bypass = 1; + + if ((prcm->cm_clksel2_pll & 0x3) == 2) + done_rate = PRCM_FULL_SPEED; + else + done_rate = PRCM_HALF_SPEED; + + /* MPU divider */ + CM_CLKSEL_MPU = prcm->cm_clksel_mpu; + + /* dsp + iva1 div(2420), iva2.1(2430) */ + CM_CLKSEL_DSP = prcm->cm_clksel_dsp; + + CM_CLKSEL_GFX = prcm->cm_clksel_gfx; + + /* Major subsystem dividers */ + CM_CLKSEL1_CORE = prcm->cm_clksel1_core; + if (cpu_is_omap2430()) + CM_CLKSEL_MDM = prcm->cm_clksel_mdm; + + /* x2 to enter init_mem */ + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + + omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, + bypass); + + omap2_init_memory_params(omap2_dll_force_needed()); + omap2_reprogram_sdrc(done_rate, 0); + + local_irq_restore(flags); + } + omap2_clksel_recalc(&dpll_ck); + + return 0; +} + +/*------------------------------------------------------------------------- + * Omap2 clock reset and init functions + *-------------------------------------------------------------------------*/ + +static struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_use = omap2_clk_use, + .clk_unuse = omap2_clk_unuse, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, +}; + +static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) +{ + u32 div, aplls, sclk = 13000000; + + aplls = CM_CLKSEL1_PLL; + aplls &= ((1 << 23) | (1 << 24) | (1 << 25)); + aplls >>= 23; /* Isolate field, 0,2,3 */ + + if (aplls == 0) + sclk = 19200000; + else if (aplls == 2) + sclk = 13000000; + else if (aplls == 3) + sclk = 12000000; + + div = PRCM_CLKSRC_CTRL; + div &= ((1 << 7) | (1 << 6)); + div >>= sys->rate_offset; + + osc->rate = sclk * div; + sys->rate = sclk; +} + +#ifdef CONFIG_OMAP_RESET_CLOCKS +static void __init omap2_disable_unused_clocks(void) +{ + struct clk *ck; + u32 regval32; + + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || + ck->enable_reg == 0) + continue; + + regval32 = __raw_readl(ck->enable_reg); + if ((regval32 & (1 << ck->enable_bit)) == 0) + continue; + + printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name); + omap2_clk_disable(ck); + } +} +late_initcall(omap2_disable_unused_clocks); +#endif + +/* + * Switch the MPU rate if specified on cmdline. + * We cannot do this early until cmdline is parsed. + */ +static int __init omap2_clk_arch_init(void) +{ + if (!mpurate) + return -EINVAL; + + if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + printk(KERN_ERR "Could not find matching MPU rate\n"); + + propagate_rate(&osc_ck); /* update main root fast */ + propagate_rate(&func_32k_ck); /* update main root slow */ + + printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + return 0; +} +arch_initcall(omap2_clk_arch_init); + +int __init omap2_clk_init(void) +{ + struct prcm_config *prcm; + struct clk ** clkp; + u32 clkrate; + + clk_init(&omap2_clk_functions); + omap2_get_crystal_rate(&osc_ck, &sys_ck); + + for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); + clkp++) { + + if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { + clk_register(*clkp); + continue; + } + + if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) { + clk_register(*clkp); + continue; + } + } + + /* Check the MPU rate set by bootloader */ + clkrate = omap2_get_dpll_rate(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; + + propagate_rate(&osc_ck); /* update main root fast */ + propagate_rate(&func_32k_ck); /* update main root slow */ + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_use(&sync_32k_ick); + clk_use(&omapctrl_ick); + if (cpu_is_omap2430()) + clk_use(&sdrc_ick); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h new file mode 100644 index 000000000000..4aeab5591bd3 --- /dev/null +++ b/arch/arm/mach-omap2/clock.h @@ -0,0 +1,2103 @@ +/* + * linux/arch/arm/mach-omap24xx/clock.h + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * Created for OMAP2. + * + * Copyright (C) 2004 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_H + +static void omap2_sys_clk_recalc(struct clk * clk); +static void omap2_clksel_recalc(struct clk * clk); +static void omap2_followparent_recalc(struct clk * clk); +static void omap2_propagate_rate(struct clk * clk); +static void omap2_mpu_recalc(struct clk * clk); +static int omap2_select_table_rate(struct clk * clk, unsigned long rate); +static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate); +static void omap2_clk_unuse(struct clk *clk); +static void omap2_sys_clk_recalc(struct clk * clk); +static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val); +static u32 omap2_clksel_get_divisor(struct clk *clk); + + +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) + +/* Memory timings */ +#define M_DDR 1 +#define M_LOCK_CTRL (1 << 2) +#define M_UNLOCK 0 +#define M_LOCK 1 + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP + * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM + */ +struct prcm_config { + unsigned long xtal_speed; /* crystal rate */ + unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ + unsigned long mpu_speed; /* speed of MPU */ + unsigned long cm_clksel_mpu; /* mpu divider */ + unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ + unsigned long cm_clksel_gfx; /* gfx dividers */ + unsigned long cm_clksel1_core; /* major subsystem dividers */ + unsigned long cm_clksel1_pll; /* m,n */ + unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ + unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ + unsigned long base_sdrc_rfr; /* base refresh timing for a set */ + unsigned char flags; +}; + +/* Mask for clksel which support parent settign in set_rate */ +#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \ + CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1) + +/* Mask for clksel regs which support rate operations */ +#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \ + CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \ + CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \ + CM_SYSCLKOUT_SEL1) + +/* + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + */ + +/* Core fields for cm_clksel, not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/*------------------------------------------------------------------------- + * Voltage/DPLL ratios + *-------------------------------------------------------------------------*/ + +/* 2430 Ratio's, 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R1_CLKSEL_L4 | R1_CLKSEL_L3 +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R2_CLKSEL_L4 | R2_CLKSEL_L3 +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Bootm (BYPASS) */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RB_CLKSEL_L4 | RB_CLKSEL_L3 +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2420 Ratio Equivalents */ +#define RXX_CLKSEL_VLYNQ (0x12 << 15) +#define RXX_CLKSEL_SSI (0x8 << 20) + +/* 2420-PRCM III 532MHz core */ +#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ +#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ +#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ +#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ + RIII_CLKSEL_L3 +#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ +#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU +#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ +#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ +#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ +#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ +#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ +#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ + RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ + RIII_CLKSEL_DSP +#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ +#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX + +/* 2420-PRCM II 600MHz core */ +#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ +#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ +#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ +#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RII_CLKSEL_L4 | RII_CLKSEL_L3 +#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ +#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU +#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ +#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ +#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ +#define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */ +#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ + RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ + RII_CLKSEL_DSP +#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ +#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX + +/* 2420-PRCM VII (boot) */ +#define RVII_CLKSEL_L3 (1 << 0) +#define RVII_CLKSEL_L4 (1 << 5) +#define RVII_CLKSEL_DSS1 (1 << 8) +#define RVII_CLKSEL_DSS2 (0 << 13) +#define RVII_CLKSEL_VLYNQ (1 << 15) +#define RVII_CLKSEL_SSI (1 << 20) +#define RVII_CLKSEL_USB (1 << 25) + +#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ + RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ + RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 + +#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ +#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU + +#define RVII_CLKSEL_DSP (1 << 0) +#define RVII_CLKSEL_DSP_IF (1 << 5) +#define RVII_SYNC_DSP (0 << 7) +#define RVII_CLKSEL_IVA (1 << 8) +#define RVII_SYNC_IVA (0 << 13) +#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ + RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP + +#define RVII_CLKSEL_GFX (1 << 0) +#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX + +/*------------------------------------------------------------------------- + * 2430 Target modes: Along with each configuration the CPU has several + * modes which goes along with them. Modes mainly are the addition of + * describe DPLL combinations to go along with a ratio. + *-------------------------------------------------------------------------*/ + +/* Hardware governed */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* + * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed + * #2 (ratio1) baseport-target + * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz + */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M5A_DPLL_MULT_13 (266 << 12) +#define M5A_DPLL_DIV_13 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M5A_DPLL_MULT_19 (180 << 12) +#define M5A_DPLL_DIV_19 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* + * #4 (ratio2) + * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz + */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M3_DPLL_MULT_13 (330 << 12) +#define M3_DPLL_DIV_13 (12 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M3_DPLL_MULT_19 (275 << 12) +#define M3_DPLL_DIV_19 (15 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_12 + +#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_13 + +#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_19 + +/* + * 2430 - chassis (sedna) + * 165 (ratio1) same as above #2 + * 150 (ratio1) + * 133 (ratio2) same as above #4 + * 110 (ratio2) same as above #3 + * 104 (ratio2) + * boot (boot) + */ + +/* + * 2420 Equivalent - mode registers + * PRCM II , target DPLL = 2*300MHz = 600MHz + */ +#define MII_DPLL_MULT_12 (50 << 12) +#define MII_DPLL_DIV_12 (1 << 8) +#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define MII_DPLL_MULT_13 (300 << 12) +#define MII_DPLL_DIV_13 (12 << 8) +#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +/* PRCM III target DPLL = 2*266 = 532MHz*/ +#define MIII_DPLL_MULT_12 (133 << 12) +#define MIII_DPLL_DIV_12 (5 << 8) +#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define MIII_DPLL_MULT_13 (266 << 12) +#define MIII_DPLL_DIV_13 (12 << 8) +#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +/* PRCM VII (boot bypass) */ +#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL +#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL + +/* High and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the oppisite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + +/* MPU speed defines */ +#define S12M 12000000 +#define S13M 13000000 +#define S19M 19200000 +#define S26M 26000000 +#define S100M 100000000 +#define S133M 133000000 +#define S150M 150000000 +#define S165M 165000000 +#define S200M 200000000 +#define S266M 266000000 +#define S300M 300000000 +#define S330M 330000000 +#define S400M 400000000 +#define S532M 532000000 +#define S600M 600000000 +#define S660M 660000000 + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defiend the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +static struct prcm_config rate_table[] = { + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM #3 - ratio2 (ES2) - FAST */ + {S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_110MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #3 - ratio2 (ES2) - SLOW */ + {S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_110MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; + +/*------------------------------------------------------------------------- + * 24xx clock tree. + * + * NOTE:In many cases here we are assigning a 'default' parent. In many + * cases the parent is selectable. The get/set parent calls will also + * switch sources. + * + * Many some clocks say always_enabled, but they can be auto idled for + * power savings. They will always be available upon clock request. + * + * Several sources are given initial rates which may be wrong, this will + * be fixed up in the init func. + * + * Things are broadly separated below by clock domains. It is + * noteworthy that most periferals have dependencies on multiple clock + * domains. Many get their interface clocks from the L4 domain, but get + * functional clocks from fixed sources or other core domain derived + * clocks. + *-------------------------------------------------------------------------*/ + +/* Base external input clocks */ +static struct clk func_32k_ck = { + .name = "func_32k_ck", + .rate = 32000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED, +}; + +/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ +static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ + .name = "osc_ck", + .rate = 26000000, /* fixed up in clock init */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, +}; + +/* With out modem likely 12MHz, with modem likely 13MHz */ +static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ + .name = "sys_ck", /* ~ ref_clk also */ + .parent = &osc_ck, + .rate = 13000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */ + .recalc = &omap2_sys_clk_recalc, +}; + +static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ + .name = "alt_ck", + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, +}; + +/* + * Analog domain root source clocks + */ + +/* dpll_ck, is broken out in to special cases through clksel */ +static struct clk dpll_ck = { + .name = "dpll_ck", + .parent = &sys_ck, /* Can be func_32k also */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk apll96_ck = { + .name = "apll96_ck", + .parent = &sys_ck, + .rate = 96000000, + .flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0x2, + .recalc = &omap2_propagate_rate, +}; + +static struct clk apll54_ck = { + .name = "apll54_ck", + .parent = &sys_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0x6, + .recalc = &omap2_propagate_rate, +}; + +/* + * PRCM digital base sources + */ +static struct clk func_54m_ck = { + .name = "func_54m_ck", + .parent = &apll54_ck, /* can also be alt_clk */ + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, + .src_offset = 5, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk core_ck = { + .name = "core_ck", + .parent = &dpll_ck, /* can also be 32k */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, +}; + +static struct clk sleep_ck = { /* sys_clk or 32k */ + .name = "sleep_ck", + .parent = &func_32k_ck, + .rate = 32000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_96m_ck = { + .name = "func_96m_ck", + .parent = &apll96_ck, + .rate = 96000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_48m_ck = { + .name = "func_48m_ck", + .parent = &apll96_ck, /* 96M or Alt */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, + .src_offset = 3, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_12m_ck = { + .name = "func_12m_ck", + .parent = &func_48m_ck, + .rate = 12000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, +}; + +/* Secure timer, only available in secure mode */ +static struct clk wdt1_osc_ck = { + .name = "ck_wdt1_osc", + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sys_clkout = { + .name = "sys_clkout", + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_SYSCLKOUT_SEL1 | RATE_CKCTL, + .src_offset = 0, + .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, + .enable_bit = 7, + .rate_offset = 3, + .recalc = &omap2_clksel_recalc, +}; + +/* In 2430, new in 2420 ES2 */ +static struct clk sys_clkout2 = { + .name = "sys_clkout2", + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_SYSCLKOUT_SEL1 | RATE_CKCTL, + .src_offset = 8, + .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, + .enable_bit = 15, + .rate_offset = 11, + .recalc = &omap2_clksel_recalc, +}; + +/* + * MPU clock domain + * Clocks: + * MPU_FCLK, MPU_ICLK + * INT_M_FCLK, INT_M_I_CLK + * + * - Individual clocks are hardware managed. + * - Base divider comes from: CM_CLKSEL_MPU + * + */ +static struct clk mpu_ck = { /* Control cpu */ + .name = "mpu_ck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL | + ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP | + CONFIG_PARTICIPANT | RATE_PROPAGATES, + .rate_offset = 0, /* bits 0-4 */ + .recalc = &omap2_clksel_recalc, +}; + +/* + * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain + * Clocks: + * 2430: IVA2.1_FCLK, IVA2.1_ICLK + * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP + */ +static struct clk iva2_1_fck = { + .name = "iva2_1_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | RATE_PROPAGATES | + CONFIG_PARTICIPANT, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva2_1_ick = { + .name = "iva2_1_ick", + .parent = &iva2_1_fck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 5, + .recalc = &omap2_clksel_recalc, +}; + +/* + * Won't be too specific here. The core clock comes into this block + * it is divided then tee'ed. One branch goes directly to xyz enable + * controls. The other branch gets further divided by 2 then possibly + * routed into a synchronizer and out of clocks abc. + */ +static struct clk dsp_fck = { + .name = "dsp_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk dsp_ick = { + .name = "dsp_ick", /* apparently ipi and isp */ + .parent = &dsp_fck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 5, + .enable_reg = (void __iomem *)&CM_ICLKEN_DSP, + .enable_bit = 1, /* for ipi */ + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva1_ifck = { + .name = "iva1_ifck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL | + CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, + .rate_offset= 8, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 10, + .recalc = &omap2_clksel_recalc, +}; + +/* IVA1 mpu/int/i/f clocks are /2 of parent */ +static struct clk iva1_mpu_int_ifck = { + .name = "iva1_mpu_int_ifck", + .parent = &iva1_ifck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 8, + .recalc = &omap2_clksel_recalc, +}; + +/* + * L3 clock domain + * L3 clocks are used for both interface and functional clocks to + * multiple entities. Some of these clocks are completely managed + * by hardware, and some others allow software control. Hardware + * managed ones general are based on directly CLK_REQ signals and + * various auto idle settings. The functional spec sets many of these + * as 'tie-high' for their enables. + * + * I-CLOCKS: + * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA + * CAM, HS-USB. + * F-CLOCK + * SSI. + * + * GPMC memories and SDRC have timing and clock sensitive registers which + * may very well need notification when the clock changes. Currently for low + * operating points, these are taken care of in sleep.S. + */ +static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ + .name = "core_l3_ck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT | + RATE_PROPAGATES, + .rate_offset = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk usb_l4_ick = { /* FS-USB interface clock */ + .name = "usb_l4_ick", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP | + CONFIG_PARTICIPANT, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 0, + .rate_offset = 25, + .recalc = &omap2_clksel_recalc, +}; + +/* + * SSI is in L3 management domain, its direct parent is core not l3, + * many core power domain entities are grouped into the L3 clock + * domain. + * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK + * + * ssr = core/1/2/3/4/5, sst = 1/2 ssr. + */ +static struct clk ssi_ssr_sst_fck = { + .name = "ssi_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, /* bit 1 */ + .enable_bit = 1, + .rate_offset = 20, + .recalc = &omap2_clksel_recalc, +}; + +/* + * GFX clock domain + * Clocks: + * GFX_FCLK, GFX_ICLK + * GFX_CG1(2d), GFX_CG2(3d) + * + * GFX_FCLK runs from L3, and is divided by (1,2,3,4) + * The 2d and 3d clocks run at a hardware determined + * divided value of fclk. + * + */ +static struct clk gfx_3d_fck = { + .name = "gfx_3d_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_GFX_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, + .enable_bit = 2, + .rate_offset= 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_2d_fck = { + .name = "gfx_2d_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_GFX_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, + .enable_bit = 1, + .rate_offset= 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_ick = { + .name = "gfx_ick", /* From l3 */ + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN_GFX, /* bit 0 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +/* + * Modem clock domain (2430) + * CLOCKS: + * MDM_OSC_CLK + * MDM_ICLK + */ +static struct clk mdm_ick = { /* used both as a ick and fck */ + .name = "mdm_ick", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_ICLKEN_MDM, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mdm_osc_ck = { + .name = "mdm_osc_ck", + .rate = 26000000, + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP243X | RATE_FIXED, + .enable_reg = (void __iomem *)&CM_FCLKEN_MDM, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +/* + * L4 clock management domain + * + * This domain contains lots of interface clocks from the L4 interface, some + * functional clocks. Fixed APLL functional source clocks are managed in + * this domain. + */ +static struct clk l4_ck = { /* used both as an ick and fck */ + .name = "l4_ck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | + DELAYED_APP | RATE_PROPAGATES, + .rate_offset = 5, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, /* bit 1 */ + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +/* + * DSS clock domain + * CLOCKs: + * DSS_L4_ICLK, DSS_L3_ICLK, + * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK + * + * DSS is both initiator and target. + */ +static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ + .name = "dss_ick", + .parent = &l4_ck, /* really both l3 and l4 */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk dss1_fck = { + .name = "dss1_fck", + .parent = &core_ck, /* Core or sys */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 0, + .rate_offset = 8, + .src_offset = 8, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk dss2_fck = { /* Alt clk used in power management */ + .name = "dss2_fck", + .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 1, + .src_offset = 13, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk dss_54m_fck = { /* Alt clk used in power management */ + .name = "dss_54m_fck", /* 54m tv clk */ + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 2, + .recalc = &omap2_propagate_rate, +}; + +/* + * CORE power domain ICLK & FCLK defines. + * Many of the these can have more than one possible parent. Entries + * here will likely have an L4 interface parent, and may have multiple + * functional clock parents. + */ +static struct clk gpt1_ick = { + .name = "gpt1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, /* Bit4 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt1_fck = { + .name = "gpt1_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_WKUP_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 0, + .src_offset = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt2_ick = { + .name = "gpt2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit4 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt2_fck = { + .name = "gpt2_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 4, + .src_offset = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt3_ick = { + .name = "gpt3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit5 */ + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt3_fck = { + .name = "gpt3_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 5, + .src_offset = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt4_ick = { + .name = "gpt4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit6 */ + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt4_fck = { + .name = "gpt4_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 6, + .src_offset = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt5_ick = { + .name = "gpt5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit7 */ + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt5_fck = { + .name = "gpt5_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 7, + .src_offset = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt6_ick = { + .name = "gpt6_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 8, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit8 */ + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt6_fck = { + .name = "gpt6_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 8, + .src_offset = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt7_ick = { + .name = "gpt7_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit9 */ + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt7_fck = { + .name = "gpt7_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 9, + .src_offset = 12, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt8_ick = { + .name = "gpt8_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit10 */ + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt8_fck = { + .name = "gpt8_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 10, + .src_offset = 14, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt9_ick = { + .name = "gpt9_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 11, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt9_fck = { + .name = "gpt9_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 11, + .src_offset = 16, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt10_ick = { + .name = "gpt10_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 12, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt10_fck = { + .name = "gpt10_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 12, + .src_offset = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt11_ick = { + .name = "gpt11_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 13, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt11_fck = { + .name = "gpt11_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 13, + .src_offset = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt12_ick = { + .name = "gpt12_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit14 */ + .enable_bit = 14, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt12_fck = { + .name = "gpt12_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 14, + .src_offset = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp1_ick = { + .name = "mcbsp1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 15, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit16 */ + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp1_fck = { + .name = "mcbsp1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 15, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp2_ick = { + .name = "mcbsp2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 16, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp2_fck = { + .name = "mcbsp2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 16, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp3_ick = { + .name = "mcbsp3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp3_fck = { + .name = "mcbsp3_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp4_ick = { + .name = "mcbsp4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp4_fck = { + .name = "mcbsp4_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp5_ick = { + .name = "mcbsp5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp5_fck = { + .name = "mcbsp5_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi1_ick = { + .name = "mcspi1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi1_fck = { + .name = "mcspi1_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi2_ick = { + .name = "mcspi2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi2_fck = { + .name = "mcspi2_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi3_ick = { + .name = "mcspi3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi3_fck = { + .name = "mcspi3_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart1_ick = { + .name = "uart1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 21, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart1_fck = { + .name = "uart1_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 21, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart2_ick = { + .name = "uart2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart2_fck = { + .name = "uart2_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart3_ick = { + .name = "uart3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart3_fck = { + .name = "uart3_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpios_ick = { + .name = "gpios_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpios_fck = { + .name = "gpios_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mpu_wdt_ick = { + .name = "mpu_wdt_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mpu_wdt_fck = { + .name = "mpu_wdt_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sync_32k_ick = { + .name = "sync_32k_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; +static struct clk wdt1_ick = { + .name = "wdt1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; +static struct clk omapctrl_ick = { + .name = "omapctrl_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; +static struct clk icr_ick = { + .name = "icr_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk cam_ick = { + .name = "cam_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 31, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk cam_fck = { + .name = "cam_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 31, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mailboxes_ick = { + .name = "mailboxes_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 30, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt4_ick = { + .name = "wdt4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 29, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt4_fck = { + .name = "wdt4_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 29, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt3_ick = { + .name = "wdt3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 28, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt3_fck = { + .name = "wdt3_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 28, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mspro_ick = { + .name = "mspro_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 27, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mspro_fck = { + .name = "mspro_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 27, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmc_ick = { + .name = "mmc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 26, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmc_fck = { + .name = "mmc_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 26, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk fac_ick = { + .name = "fac_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 25, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk fac_fck = { + .name = "fac_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 25, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk eac_ick = { + .name = "eac_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 24, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk eac_fck = { + .name = "eac_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 24, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk hdq_ick = { + .name = "hdq_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 23, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk hdq_fck = { + .name = "hdq_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 23, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c2_ick = { + .name = "i2c2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c2_fck = { + .name = "i2c2_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2chs2_fck = { + .name = "i2chs2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c1_ick = { + .name = "i2c1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c1_fck = { + .name = "i2c1_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2chs1_fck = { + .name = "i2chs1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk vlynq_ick = { + .name = "vlynq_ick", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk vlynq_fck = { + .name = "vlynq_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 3, + .src_offset = 15, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sdrc_ick = { + .name = "sdrc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN3_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk des_ick = { + .name = "des_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sha_ick = { + .name = "sha_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk rng_ick = { + .name = "rng_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk aes_ick = { + .name = "aes_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk pka_ick = { + .name = "pka_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk usb_fck = { + .name = "usb_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk usbhs_ick = { + .name = "usbhs_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs1_ick = { + .name = "mmchs1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs1_fck = { + .name = "mmchs1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs2_ick = { + .name = "mmchs2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs2_fck = { + .name = "mmchs2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpio5_ick = { + .name = "gpio5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpio5_fck = { + .name = "gpio5_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mdm_intc_ick = { + .name = "mdm_intc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 11, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchsdb1_fck = { + .name = "mmchsdb1_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 16, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchsdb2_fck = { + .name = "mmchsdb2_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +/* + * This clock is a composite clock which does entire set changes then + * forces a rebalance. It keys on the MPU speed, but it really could + * be any key speed part of a set in the rate table. + * + * to really change a set, you need memory table sets which get changed + * in sram, pre-notifiers & post notifiers, changing the top set, without + * having low level display recalc's won't work... this is why dpm notifiers + * work, isr's off, walk a list of clocks already _off_ and not messing with + * the bus. + * + * This clock should have no parent. It embodies the entire upper level + * active set. A parent will mess up some of the init also. + */ +static struct clk virt_prcm_set = { + .name = "virt_prcm_set", + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, + .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ + .recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */ + .set_rate = &omap2_select_table_rate, + .round_rate = &omap2_round_to_table_rate, +}; + +static struct clk *onchip_clks[] = { + /* external root sources */ + &func_32k_ck, + &osc_ck, + &sys_ck, + &alt_ck, + /* internal analog sources */ + &dpll_ck, + &apll96_ck, + &apll54_ck, + /* internal prcm root sources */ + &func_54m_ck, + &core_ck, + &sleep_ck, + &func_96m_ck, + &func_48m_ck, + &func_12m_ck, + &wdt1_osc_ck, + &sys_clkout, + &sys_clkout2, + /* mpu domain clocks */ + &mpu_ck, + /* dsp domain clocks */ + &iva2_1_fck, /* 2430 */ + &iva2_1_ick, + &dsp_ick, /* 2420 */ + &dsp_fck, + &iva1_ifck, + &iva1_mpu_int_ifck, + /* GFX domain clocks */ + &gfx_3d_fck, + &gfx_2d_fck, + &gfx_ick, + /* Modem domain clocks */ + &mdm_ick, + &mdm_osc_ck, + /* DSS domain clocks */ + &dss_ick, + &dss1_fck, + &dss2_fck, + &dss_54m_fck, + /* L3 domain clocks */ + &core_l3_ck, + &ssi_ssr_sst_fck, + &usb_l4_ick, + /* L4 domain clocks */ + &l4_ck, /* used as both core_l4 and wu_l4 */ + &ssi_l4_ick, + /* virtual meta-group clock */ + &virt_prcm_set, + /* general l4 interface ck, multi-parent functional clk */ + &gpt1_ick, + &gpt1_fck, + &gpt2_ick, + &gpt2_fck, + &gpt3_ick, + &gpt3_fck, + &gpt4_ick, + &gpt4_fck, + &gpt5_ick, + &gpt5_fck, + &gpt6_ick, + &gpt6_fck, + &gpt7_ick, + &gpt7_fck, + &gpt8_ick, + &gpt8_fck, + &gpt9_ick, + &gpt9_fck, + &gpt10_ick, + &gpt10_fck, + &gpt11_ick, + &gpt11_fck, + &gpt12_ick, + &gpt12_fck, + &mcbsp1_ick, + &mcbsp1_fck, + &mcbsp2_ick, + &mcbsp2_fck, + &mcbsp3_ick, + &mcbsp3_fck, + &mcbsp4_ick, + &mcbsp4_fck, + &mcbsp5_ick, + &mcbsp5_fck, + &mcspi1_ick, + &mcspi1_fck, + &mcspi2_ick, + &mcspi2_fck, + &mcspi3_ick, + &mcspi3_fck, + &uart1_ick, + &uart1_fck, + &uart2_ick, + &uart2_fck, + &uart3_ick, + &uart3_fck, + &gpios_ick, + &gpios_fck, + &mpu_wdt_ick, + &mpu_wdt_fck, + &sync_32k_ick, + &wdt1_ick, + &omapctrl_ick, + &icr_ick, + &cam_fck, + &cam_ick, + &mailboxes_ick, + &wdt4_ick, + &wdt4_fck, + &wdt3_ick, + &wdt3_fck, + &mspro_ick, + &mspro_fck, + &mmc_ick, + &mmc_fck, + &fac_ick, + &fac_fck, + &eac_ick, + &eac_fck, + &hdq_ick, + &hdq_fck, + &i2c1_ick, + &i2c1_fck, + &i2chs1_fck, + &i2c2_ick, + &i2c2_fck, + &i2chs2_fck, + &vlynq_ick, + &vlynq_fck, + &sdrc_ick, + &des_ick, + &sha_ick, + &rng_ick, + &aes_ick, + &pka_ick, + &usb_fck, + &usbhs_ick, + &mmchs1_ick, + &mmchs1_fck, + &mmchs2_ick, + &mmchs2_fck, + &gpio5_ick, + &gpio5_fck, + &mdm_intc_ick, + &mmchsdb1_fck, + &mmchsdb2_fck, +}; + +#endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c new file mode 100644 index 000000000000..7181edb89352 --- /dev/null +++ b/arch/arm/mach-omap2/devices.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-omap2/devices.c + * + * OMAP2 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> + +extern void omap_nop_release(struct device *dev); + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP2_I2C_BASE2 0x48072000 +#define OMAP2_I2C_INT2 57 + +static struct resource i2c_resources2[] = { + { + .start = OMAP2_I2C_BASE2, + .end = OMAP2_I2C_BASE2 + 0x3f, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP2_I2C_INT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap_i2c_device2 = { + .name = "i2c_omap", + .id = 2, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources2), + .resource = i2c_resources2, +}; + +/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */ +static void omap_init_i2c(void) +{ + /* REVISIT: Second I2C not in use on H4? */ + if (machine_is_omap_h4()) + return; + + omap_cfg_reg(J15_24XX_I2C2_SCL); + omap_cfg_reg(H19_24XX_I2C2_SDA); + (void) platform_device_register(&omap_i2c_device2); +} + +#else + +static void omap_init_i2c(void) {} + +#endif + +/*-------------------------------------------------------------------------*/ + +static int __init omap2_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_i2c(); + + return 0; +} +arch_initcall(omap2_init_devices); + diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c new file mode 100644 index 000000000000..76187300f2b6 --- /dev/null +++ b/arch/arm/mach-omap2/id.c @@ -0,0 +1,124 @@ +/* + * linux/arch/arm/mach-omap2/id.c + * + * OMAP2 CPU identification code + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/io.h> + +#define OMAP24XX_TAP_BASE io_p2v(0x48014000) + +#define OMAP_TAP_IDCODE 0x0204 +#define OMAP_TAP_PROD_ID 0x0208 + +#define OMAP_TAP_DIE_ID_0 0x0218 +#define OMAP_TAP_DIE_ID_1 0x021C +#define OMAP_TAP_DIE_ID_2 0x0220 +#define OMAP_TAP_DIE_ID_3 0x0224 + +/* system_rev fields for OMAP2 processors: + * CPU id bits [31:16], + * CPU device type [15:12], (unprg,normal,POP) + * CPU revision [11:08] + * CPU class bits [07:00] + */ + +struct omap_id { + u16 hawkeye; /* Silicon type (Hawkeye id) */ + u8 dev; /* Device type from production_id reg */ + u32 type; /* combined type id copied to system_rev */ +}; + +/* Register values to detect the OMAP version */ +static struct omap_id omap_ids[] __initdata = { + { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 }, + { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 }, + { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 }, + { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 }, + { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 }, + { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 }, +}; + +static u32 __init read_tap_reg(int reg) +{ + return __raw_readl(OMAP24XX_TAP_BASE + reg); +} + +void __init omap2_check_revision(void) +{ + int i, j; + u32 idcode; + u32 prod_id; + u16 hawkeye; + u8 dev_type; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + prod_id = read_tap_reg(OMAP_TAP_PROD_ID); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0x0f; + dev_type = (prod_id >> 16) & 0x0f; + +#ifdef DEBUG + printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n", + idcode, rev, hawkeye, (idcode >> 1) & 0x7ff); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_0)); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n", + read_tap_reg(OMAP_TAP_DIE_ID_1), + (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_2)); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_3)); + printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n", + prod_id, dev_type); +#endif + + /* Check hawkeye ids */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (hawkeye == omap_ids[i].hawkeye) + break; + } + + if (i == ARRAY_SIZE(omap_ids)) { + printk(KERN_ERR "Unknown OMAP CPU id\n"); + return; + } + + for (j = i; j < ARRAY_SIZE(omap_ids); j++) { + if (dev_type == omap_ids[j].dev) + break; + } + + if (j == ARRAY_SIZE(omap_ids)) { + printk(KERN_ERR "Unknown OMAP device type. " + "Handling it as OMAP%04x\n", + omap_ids[i].type >> 16); + j = i; + } + system_rev = omap_ids[j].type; + + system_rev |= rev << 8; + + /* Add the cpu class info (24xx) */ + system_rev |= 0x24; + + pr_info("OMAP%04x", system_rev >> 16); + if ((system_rev >> 8) & 0x0f) + printk("%x", (system_rev >> 8) & 0x0f); + printk("\n"); +} + diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c new file mode 100644 index 000000000000..8ea67bf196a5 --- /dev/null +++ b/arch/arm/mach-omap2/io.c @@ -0,0 +1,53 @@ +/* + * linux/arch/arm/mach-omap2/io.c + * + * OMAP2 I/O mapping code + * + * Copyright (C) 2005 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/mach/map.h> +#include <asm/io.h> +#include <asm/arch/mux.h> + +extern void omap_sram_init(void); +extern int omap2_clk_init(void); +extern void omap2_check_revision(void); + +/* + * The machine specific code may provide the extra mapping besides the + * default mapping provided here. + */ +static struct map_desc omap2_io_desc[] __initdata = { + { + .virtual = L3_24XX_VIRT, + .pfn = __phys_to_pfn(L3_24XX_PHYS), + .length = L3_24XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE + } +}; + +void __init omap_map_common_io(void) +{ + iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc)); + omap2_check_revision(); + omap_sram_init(); + omap2_mux_init(); + omap2_clk_init(); +} diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c new file mode 100644 index 000000000000..d7baff675cfe --- /dev/null +++ b/arch/arm/mach-omap2/irq.c @@ -0,0 +1,149 @@ +/* + * linux/arch/arm/mach-omap/omap2/irq.c + * + * Interrupt handler for OMAP2 boards. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/config.h> +#include <linux/interrupt.h> +#include <asm/hardware.h> +#include <asm/mach/irq.h> +#include <asm/irq.h> +#include <asm/io.h> + +#define INTC_REVISION 0x0000 +#define INTC_SYSCONFIG 0x0010 +#define INTC_SYSSTATUS 0x0014 +#define INTC_CONTROL 0x0048 +#define INTC_MIR_CLEAR0 0x0088 +#define INTC_MIR_SET0 0x008c + +/* + * OMAP2 has a number of different interrupt controllers, each interrupt + * controller is identified as its own "bank". Register definitions are + * fairly consistent for each bank, but not all registers are implemented + * for each bank.. when in doubt, consult the TRM. + */ +static struct omap_irq_bank { + unsigned long base_reg; + unsigned int nr_irqs; +} __attribute__ ((aligned(4))) irq_banks[] = { + { + /* MPU INTC */ + .base_reg = OMAP24XX_IC_BASE, + .nr_irqs = 96, + }, { + /* XXX: DSP INTC */ + +#if 0 + /* + * Commented out for now until we fix the IVA clocking + */ +#ifdef CONFIG_ARCH_OMAP2420 + }, { + /* IVA INTC (2420 only) */ + .base_reg = OMAP24XX_IVA_INTC_BASE, + .nr_irqs = 16, /* Actually 32, but only 16 are used */ +#endif +#endif + } +}; + +/* XXX: FIQ and additional INTC support (only MPU at the moment) */ +static void omap_ack_irq(unsigned int irq) +{ + omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); +} + +static void omap_mask_irq(unsigned int irq) +{ + int offset = (irq >> 5) << 5; + + if (irq >= 64) { + irq %= 64; + } else if (irq >= 32) { + irq %= 32; + } + + omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); +} + +static void omap_unmask_irq(unsigned int irq) +{ + int offset = (irq >> 5) << 5; + + if (irq >= 64) { + irq %= 64; + } else if (irq >= 32) { + irq %= 32; + } + + omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); +} + +static void omap_mask_ack_irq(unsigned int irq) +{ + omap_mask_irq(irq); + omap_ack_irq(irq); +} + +static struct irqchip omap_irq_chip = { + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, +}; + +static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) +{ + unsigned long tmp; + + tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff; + printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " + "(revision %ld.%ld) with %d interrupts\n", + bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); + + tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG); + tmp |= 1 << 1; /* soft reset */ + omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + + while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + /* Wait for reset to complete */; +} + +void __init omap_init_irq(void) +{ + unsigned long nr_irqs = 0; + unsigned int nr_banks = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + struct omap_irq_bank *bank = irq_banks + i; + + /* XXX */ + if (!bank->base_reg) + continue; + + omap_irq_bank_init_one(bank); + + nr_irqs += bank->nr_irqs; + nr_banks++; + } + + printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n", + nr_irqs, nr_banks, nr_banks > 1 ? "s" : ""); + + for (i = 0; i < nr_irqs; i++) { + set_irq_chip(i, &omap_irq_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID); + } +} + diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c new file mode 100644 index 000000000000..ea4654815dd1 --- /dev/null +++ b/arch/arm/mach-omap2/mux.c @@ -0,0 +1,65 @@ +/* + * linux/arch/arm/mach-omap2/mux.c + * + * OMAP1 pin multiplexing configurations + * + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/spinlock.h> + +#include <asm/arch/mux.h> + +#ifdef CONFIG_OMAP_MUX + +/* NOTE: See mux.h for the enumeration */ + +struct pin_config __initdata_or_module omap24xx_pins[] = { +/* + * description mux mux pull pull debug + * offset mode ena type + */ + +/* 24xx I2C */ +MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1) +MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1) +MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1) +MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1) + +/* Menelaus interrupt */ +MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) + +/* 24xx GPIO */ +MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) +MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) + +}; + +int __init omap2_mux_init(void) +{ + omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins)); + return 0; +} + +#endif diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm.h new file mode 100644 index 000000000000..2eb89b936c83 --- /dev/null +++ b/arch/arm/mach-omap2/prcm.h @@ -0,0 +1,419 @@ +/* + * prcm.h - Access definations for use in OMAP24XX clock and power management + * + * Copyright (C) 2005 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DPM_PRCM_H +#define __ASM_ARM_ARCH_DPM_PRCM_H + +/* SET_PERFORMANCE_LEVEL PARAMETERS */ +#define PRCM_HALF_SPEED 1 +#define PRCM_FULL_SPEED 2 + +#ifndef __ASSEMBLER__ + +#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset)) + +#define PRCM_REVISION PRCM_REG32(0x000) +#define PRCM_SYSCONFIG PRCM_REG32(0x010) +#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018) +#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C) +#define PRCM_VOLTCTRL PRCM_REG32(0x050) +#define PRCM_VOLTST PRCM_REG32(0x054) +#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060) +#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070) +#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078) +#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080) +#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084) +#define PRCM_VOLTSETUP PRCM_REG32(0x090) +#define PRCM_CLKSSETUP PRCM_REG32(0x094) +#define PRCM_POLCTRL PRCM_REG32(0x098) + +/* GENERAL PURPOSE */ +#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0) +#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4) +#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8) +#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC) +#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0) +#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4) +#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8) +#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC) +#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0) +#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4) +#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8) +#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC) +#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0) +#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4) +#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8) +#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC) +#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0) +#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4) +#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8) +#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC) + +/* MPU */ +#define CM_CLKSEL_MPU PRCM_REG32(0x140) +#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148) +#define RM_RSTST_MPU PRCM_REG32(0x158) +#define PM_WKDEP_MPU PRCM_REG32(0x1C8) +#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4) +#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8) +#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC) +#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0) +#define PM_PWSTST_MPU PRCM_REG32(0x1E4) + +/* CORE */ +#define CM_FCLKEN1_CORE PRCM_REG32(0x200) +#define CM_FCLKEN2_CORE PRCM_REG32(0x204) +#define CM_FCLKEN3_CORE PRCM_REG32(0x208) +#define CM_ICLKEN1_CORE PRCM_REG32(0x210) +#define CM_ICLKEN2_CORE PRCM_REG32(0x214) +#define CM_ICLKEN3_CORE PRCM_REG32(0x218) +#define CM_ICLKEN4_CORE PRCM_REG32(0x21C) +#define CM_IDLEST1_CORE PRCM_REG32(0x220) +#define CM_IDLEST2_CORE PRCM_REG32(0x224) +#define CM_IDLEST3_CORE PRCM_REG32(0x228) +#define CM_IDLEST4_CORE PRCM_REG32(0x22C) +#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230) +#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234) +#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238) +#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C) +#define CM_CLKSEL1_CORE PRCM_REG32(0x240) +#define CM_CLKSEL2_CORE PRCM_REG32(0x244) +#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248) +#define PM_WKEN1_CORE PRCM_REG32(0x2A0) +#define PM_WKEN2_CORE PRCM_REG32(0x2A4) +#define PM_WKST1_CORE PRCM_REG32(0x2B0) +#define PM_WKST2_CORE PRCM_REG32(0x2B4) +#define PM_WKDEP_CORE PRCM_REG32(0x2C8) +#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0) +#define PM_PWSTST_CORE PRCM_REG32(0x2E4) + +/* GFX */ +#define CM_FCLKEN_GFX PRCM_REG32(0x300) +#define CM_ICLKEN_GFX PRCM_REG32(0x310) +#define CM_IDLEST_GFX PRCM_REG32(0x320) +#define CM_CLKSEL_GFX PRCM_REG32(0x340) +#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348) +#define RM_RSTCTRL_GFX PRCM_REG32(0x350) +#define RM_RSTST_GFX PRCM_REG32(0x358) +#define PM_WKDEP_GFX PRCM_REG32(0x3C8) +#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0) +#define PM_PWSTST_GFX PRCM_REG32(0x3E4) + +/* WAKE-UP */ +#define CM_FCLKEN_WKUP PRCM_REG32(0x400) +#define CM_ICLKEN_WKUP PRCM_REG32(0x410) +#define CM_IDLEST_WKUP PRCM_REG32(0x420) +#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430) +#define CM_CLKSEL_WKUP PRCM_REG32(0x440) +#define RM_RSTCTRL_WKUP PRCM_REG32(0x450) +#define RM_RSTTIME_WKUP PRCM_REG32(0x454) +#define RM_RSTST_WKUP PRCM_REG32(0x458) +#define PM_WKEN_WKUP PRCM_REG32(0x4A0) +#define PM_WKST_WKUP PRCM_REG32(0x4B0) + +/* CLOCKS */ +#define CM_CLKEN_PLL PRCM_REG32(0x500) +#define CM_IDLEST_CKGEN PRCM_REG32(0x520) +#define CM_AUTOIDLE_PLL PRCM_REG32(0x530) +#define CM_CLKSEL1_PLL PRCM_REG32(0x540) +#define CM_CLKSEL2_PLL PRCM_REG32(0x544) + +/* DSP */ +#define CM_FCLKEN_DSP PRCM_REG32(0x800) +#define CM_ICLKEN_DSP PRCM_REG32(0x810) +#define CM_IDLEST_DSP PRCM_REG32(0x820) +#define CM_AUTOIDLE_DSP PRCM_REG32(0x830) +#define CM_CLKSEL_DSP PRCM_REG32(0x840) +#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848) +#define RM_RSTCTRL_DSP PRCM_REG32(0x850) +#define RM_RSTST_DSP PRCM_REG32(0x858) +#define PM_WKEN_DSP PRCM_REG32(0x8A0) +#define PM_WKDEP_DSP PRCM_REG32(0x8C8) +#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0) +#define PM_PWSTST_DSP PRCM_REG32(0x8E4) +#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0) +#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4) + +/* IVA */ +#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8) +#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC) + +/* Modem on 2430 */ +#define CM_FCLKEN_MDM PRCM_REG32(0xC00) +#define CM_ICLKEN_MDM PRCM_REG32(0xC10) +#define CM_IDLEST_MDM PRCM_REG32(0xC20) +#define CM_CLKSEL_MDM PRCM_REG32(0xC40) + +/* FIXME: Move to header for 2430 */ +#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000) +#define DISP_REG32(offset) __REG32(DISP_BASE + (offset)) + +#define GPMC_BASE (OMAP24XX_GPMC_BASE) +#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset)) + +#define GPT1_BASE (OMAP24XX_GPT1) +#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset)) + +/* Misc sysconfig */ +#define DISPC_SYSCONFIG DISP_REG32(0x410) +#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000) +#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10) +#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10) + +//#define DSP_MMU_SYSCONFIG 0x5A000010 +#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10) +//#define IVA_MMU_SYSCONFIG 0x5D000010 +//#define DSP_DMA_SYSCONFIG 0x00FCC02C +#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C) +#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C) +#define GPMC_SYSCONFIG GPMC_REG32(0x010) +#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010) +#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054) +#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054) +#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054) +//#define IVA_SYSCONFIG 0x5C060010 +#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10) +#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10) +#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010) +//#define VLYNQ_SYSCONFIG 0x67FFFE10 + +/* rkw - good cannidates for PM_ to start what nm was trying */ +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000) + +#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010) +#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10) +#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10) +#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10) +#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10) +#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10) +#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10) +#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10) +#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10) +#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10) +#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10) +#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10) + +#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1))) + +#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10)) +#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10)) +#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10)) +#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10)) + +/* GP TIMER 1 */ +#define GPTIMER1_TISTAT GPT1_REG32(0x014) +#define GPTIMER1_TISR GPT1_REG32(0x018) +#define GPTIMER1_TIER GPT1_REG32(0x01C) +#define GPTIMER1_TWER GPT1_REG32(0x020) +#define GPTIMER1_TCLR GPT1_REG32(0x024) +#define GPTIMER1_TCRR GPT1_REG32(0x028) +#define GPTIMER1_TLDR GPT1_REG32(0x02C) +#define GPTIMER1_TTGR GPT1_REG32(0x030) +#define GPTIMER1_TWPS GPT1_REG32(0x034) +#define GPTIMER1_TMAR GPT1_REG32(0x038) +#define GPTIMER1_TCAR1 GPT1_REG32(0x03C) +#define GPTIMER1_TSICR GPT1_REG32(0x040) +#define GPTIMER1_TCAR2 GPT1_REG32(0x044) + +/* rkw -- base fix up please... */ +#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018) + +/* SDRC */ +#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060) +#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064) +#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068) +#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C) +#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070) +#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084) + +/* GPIO 1 */ +#define GPIO1_BASE GPIOX_BASE(1) +#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset)) +#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C) +#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018) +#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C) +#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028) +#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020) +#define GPIO1_RISINGDETECT GPIO1_REG32(0x048) +#define GPIO1_DATAIN GPIO1_REG32(0x038) +#define GPIO1_OE GPIO1_REG32(0x034) +#define GPIO1_DATAOUT GPIO1_REG32(0x03C) + +/* GPIO2 */ +#define GPIO2_BASE GPIOX_BASE(2) +#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset)) +#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C) +#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018) +#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C) +#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028) +#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020) +#define GPIO2_RISINGDETECT GPIO2_REG32(0x048) +#define GPIO2_DATAIN GPIO2_REG32(0x038) +#define GPIO2_OE GPIO2_REG32(0x034) +#define GPIO2_DATAOUT GPIO2_REG32(0x03C) + +/* GPIO 3 */ +#define GPIO3_BASE GPIOX_BASE(3) +#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset)) +#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C) +#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018) +#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C) +#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028) +#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020) +#define GPIO3_RISINGDETECT GPIO3_REG32(0x048) +#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C) +#define GPIO3_DATAIN GPIO3_REG32(0x038) +#define GPIO3_OE GPIO3_REG32(0x034) +#define GPIO3_DATAOUT GPIO3_REG32(0x03C) +#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) +#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) + +/* GPIO 4 */ +#define GPIO4_BASE GPIOX_BASE(4) +#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset)) +#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C) +#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018) +#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C) +#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028) +#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020) +#define GPIO4_RISINGDETECT GPIO4_REG32(0x048) +#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C) +#define GPIO4_DATAIN GPIO4_REG32(0x038) +#define GPIO4_OE GPIO4_REG32(0x034) +#define GPIO4_DATAOUT GPIO4_REG32(0x03C) +#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050) +#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054) + + +/* IO CONFIG */ +#define CONTROL_BASE (OMAP24XX_CTRL_BASE) +#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset)) + +#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104) +#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134) +#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8) +#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C) +#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090) +#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8) +#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) +#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0) +#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC) + +/* CONTROL */ +#define CONTROL_DEVCONF CONTROL_REG32(0x274) + +/* INTERRUPT CONTROLLER */ +#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000) +#define INTC_REG32(offset) __REG32(INTC_BASE + (offset)) + +#define INTC1_U_BASE INTC_REG32(0x000) +#define INTC_MIR0 INTC_REG32(0x084) +#define INTC_MIR_SET0 INTC_REG32(0x08C) +#define INTC_MIR_CLEAR0 INTC_REG32(0x088) +#define INTC_ISR_CLEAR0 INTC_REG32(0x094) +#define INTC_MIR1 INTC_REG32(0x0A4) +#define INTC_MIR_SET1 INTC_REG32(0x0AC) +#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8) +#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4) +#define INTC_MIR2 INTC_REG32(0x0C4) +#define INTC_MIR_SET2 INTC_REG32(0x0CC) +#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8) +#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4) +#define INTC_SIR_IRQ INTC_REG32(0x040) +#define INTC_CONTROL INTC_REG32(0x048) +#define INTC_ILR11 INTC_REG32(0x12C) +#define INTC_ILR32 INTC_REG32(0x180) +#define INTC_ILR37 INTC_REG32(0x194) +#define INTC_SYSCONFIG INTC_REG32(0x010) + +/* RAM FIREWALL */ +#define RAMFW_BASE (0x68005000) +#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset)) + +#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048) +#define RAMFW_READPERM0 RAMFW_REG32(0x050) +#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058) + +/* GPMC CS1 FPGA ON USER INTERFACE MODULE */ +//#define DEBUG_BOARD_LED_REGISTER 0x04000014 + +/* GPMC CS0 */ +#define GPMC_CONFIG1_0 GPMC_REG32(0x060) +#define GPMC_CONFIG2_0 GPMC_REG32(0x064) +#define GPMC_CONFIG3_0 GPMC_REG32(0x068) +#define GPMC_CONFIG4_0 GPMC_REG32(0x06C) +#define GPMC_CONFIG5_0 GPMC_REG32(0x070) +#define GPMC_CONFIG6_0 GPMC_REG32(0x074) +#define GPMC_CONFIG7_0 GPMC_REG32(0x078) + +/* DSS */ +#define DSS_CONTROL DISP_REG32(0x040) +#define DISPC_CONTROL DISP_REG32(0x440) +#define DISPC_SYSSTATUS DISP_REG32(0x414) +#define DISPC_IRQSTATUS DISP_REG32(0x418) +#define DISPC_IRQENABLE DISP_REG32(0x41C) +#define DISPC_CONFIG DISP_REG32(0x444) +#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C) +#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450) +#define DISPC_TRANS_COLOR0 DISP_REG32(0x454) +#define DISPC_TRANS_COLOR1 DISP_REG32(0x458) +#define DISPC_LINE_NUMBER DISP_REG32(0x460) +#define DISPC_TIMING_H DISP_REG32(0x464) +#define DISPC_TIMING_V DISP_REG32(0x468) +#define DISPC_POL_FREQ DISP_REG32(0x46C) +#define DISPC_DIVISOR DISP_REG32(0x470) +#define DISPC_SIZE_DIG DISP_REG32(0x478) +#define DISPC_SIZE_LCD DISP_REG32(0x47C) +#define DISPC_GFX_BA0 DISP_REG32(0x480) +#define DISPC_GFX_BA1 DISP_REG32(0x484) +#define DISPC_GFX_POSITION DISP_REG32(0x488) +#define DISPC_GFX_SIZE DISP_REG32(0x48C) +#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0) +#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4) +#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC) +#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0) +#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4) +#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8) +#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4) +#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8) +#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC) + +/* Wake up define for board */ +#define GPIO97 (1 << 1) +#define GPIO88 (1 << 24) + +#endif /* __ASSEMBLER__ */ + +#endif + + + + + diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c new file mode 100644 index 000000000000..f4df04fe1dd8 --- /dev/null +++ b/arch/arm/mach-omap2/serial.c @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-omap/omap2/serial.c + * + * OMAP2 serial support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * + * Based off of arch/arm/mach-omap/omap1/serial.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#include <asm/arch/common.h> +#include <asm/arch/board.h> + +static struct clk * uart1_ick = NULL; +static struct clk * uart1_fck = NULL; +static struct clk * uart2_ick = NULL; +static struct clk * uart2_fck = NULL; +static struct clk * uart3_ick = NULL; +static struct clk * uart3_fck = NULL; + +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = (unsigned long)OMAP_UART1_BASE, + .irq = 72, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = (unsigned long)OMAP_UART2_BASE, + .irq = 73, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = (unsigned long)OMAP_UART3_BASE, + .irq = 74, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .flags = 0 + } +}; + +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) +{ + offset <<= up->regshift; + return (unsigned int)__raw_readb(up->membase + offset); +} + +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) +{ + offset <<= p->regshift; + __raw_writeb(value, (unsigned long)(p->membase + offset)); +} + +/* + * Internal UARTs need to be initialized for the 8250 autoconfig to work + * properly. Note that the TX watermark initialization may not be needed + * once the 8250.c watermark handling code is merged. + */ +static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +{ + serial_write_reg(p, UART_OMAP_MDR1, 0x07); + serial_write_reg(p, UART_OMAP_SCR, 0x08); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); + serial_write_reg(p, UART_OMAP_SYSC, 0x01); +} + +void __init omap_serial_init() +{ + int i; + const struct omap_uart_config *info; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + + info = omap_get_config(OMAP_TAG_UART, + struct omap_uart_config); + + if (info == NULL) + return; + + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->membase = 0; + p->mapbase = 0; + continue; + } + + switch (i) { + case 0: + uart1_ick = clk_get(NULL, "uart1_ick"); + if (IS_ERR(uart1_ick)) + printk("Could not get uart1_ick\n"); + else { + clk_use(uart1_ick); + } + + uart1_fck = clk_get(NULL, "uart1_fck"); + if (IS_ERR(uart1_fck)) + printk("Could not get uart1_fck\n"); + else { + clk_use(uart1_fck); + } + break; + case 1: + uart2_ick = clk_get(NULL, "uart2_ick"); + if (IS_ERR(uart2_ick)) + printk("Could not get uart2_ick\n"); + else { + clk_use(uart2_ick); + } + + uart2_fck = clk_get(NULL, "uart2_fck"); + if (IS_ERR(uart2_fck)) + printk("Could not get uart2_fck\n"); + else { + clk_use(uart2_fck); + } + break; + case 2: + uart3_ick = clk_get(NULL, "uart3_ick"); + if (IS_ERR(uart3_ick)) + printk("Could not get uart3_ick\n"); + else { + clk_use(uart3_ick); + } + + uart3_fck = clk_get(NULL, "uart3_fck"); + if (IS_ERR(uart3_fck)) + printk("Could not get uart3_fck\n"); + else { + clk_use(uart3_fck); + } + break; + } + + omap_serial_reset(p); + } +} + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static int __init omap_init(void) +{ + return platform_device_register(&serial_device); +} +arch_initcall(omap_init); diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S new file mode 100644 index 000000000000..2a869e203342 --- /dev/null +++ b/arch/arm/mach-omap2/sram-fn.S @@ -0,0 +1,333 @@ +/* + * linux/arch/arm/mach-omap1/sram.S + * + * Omap2 specific functions that need to be run in internal SRAM + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/arch/io.h> +#include <asm/hardware.h> + +#include <asm/arch/prcm.h> + +#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010) + +#define CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544) +#define PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050) +#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080) +#define CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500) +#define CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520) +#define CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540) + +#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060) +#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4) + + .text + +ENTRY(sram_ddr_init) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + mov r12, r2 @ capture CS1 vs CS0 + mov r8, r3 @ capture force parameter + + /* frequency shift down */ + ldr r2, cm_clksel2_pll @ get address of dpllout reg + mov r3, #0x1 @ value for 1x operation + str r3, [r2] @ go to L1-freq operation + + /* voltage shift down */ + mov r9, #0x1 @ set up for L1 voltage call + bl voltage_shift @ go drop voltage + + /* dll lock mode */ + ldr r11, sdrc_dlla_ctrl @ addr of dlla ctrl + ldr r10, [r11] @ get current val + cmp r12, #0x1 @ cs1 base (2422 es2.05/1) + addeq r11, r11, #0x8 @ if cs1 base, move to DLLB + mvn r9, #0x4 @ mask to get clear bit2 + and r10, r10, r9 @ clear bit2 for lock mode. + orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) + orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + str r10, [r11] @ commit to DLLA_CTRL + bl i_dll_wait @ wait for dll to lock + + /* get dll value */ + add r11, r11, #0x4 @ get addr of status reg + ldr r10, [r11] @ get locked value + + /* voltage shift up */ + mov r9, #0x0 @ shift back to L0-voltage + bl voltage_shift @ go raise voltage + + /* frequency shift up */ + mov r3, #0x2 @ value for 2x operation + str r3, [r2] @ go to L0-freq operation + + /* reset entry mode for dllctrl */ + sub r11, r11, #0x4 @ move from status to ctrl + cmp r12, #0x1 @ normalize if cs1 based + subeq r11, r11, #0x8 @ possibly back to DLLA + cmp r8, #0x1 @ if forced unlock exit + orreq r1, r1, #0x4 @ make sure exit with unlocked value + str r1, [r11] @ restore DLLA_CTRL high value + add r11, r11, #0x8 @ move to DLLB_CTRL addr + str r1, [r11] @ set value DLLB_CTRL + bl i_dll_wait @ wait for possible lock + + /* set up for return, DDR should be good */ + str r10, [r0] @ write dll_status and return counter + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + + /* ensure the DLL has relocked */ +i_dll_wait: + mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks +i_dll_delay: + subs r4, r4, #0x1 + bne i_dll_delay + mov pc, lr + + /* + * shift up or down voltage, use R9 as input to tell level. + * wait for it to finish, use 32k sync counter, 1tick=31uS. + */ +voltage_shift: + ldr r4, prcm_voltctrl @ get addr of volt ctrl. + ldr r5, [r4] @ get value. + ldr r6, prcm_mask_val @ get value of mask + and r5, r5, r6 @ apply mask to clear bits + orr r5, r5, r9 @ bulld value for L0/L1-volt operation. + str r5, [r4] @ set up for change. + mov r3, #0x4000 @ get val for force + orr r5, r5, r3 @ build value for force + str r5, [r4] @ Force transition to L1 + + ldr r3, timer_32ksynct_cr @ get addr of counter + ldr r5, [r3] @ get value + add r5, r5, #0x3 @ give it at most 93uS +volt_delay: + ldr r7, [r3] @ get timer value + cmp r5, r7 @ time up? + bhi volt_delay @ not yet->branch + mov pc, lr @ back to caller. + +/* relative load constants */ +cm_clksel2_pll: + .word CM_CLKSEL2_PLL_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +prcm_voltctrl: + .word PRCM_VOLTCTRL_V +prcm_mask_val: + .word 0xFFFF3FFC +timer_32ksynct_cr: + .word TIMER_32KSYNCT_CR_V +ENTRY(sram_ddr_init_sz) + .word . - sram_ddr_init + +/* + * Reprograms memory timings. + * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR] + * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0 + */ +ENTRY(sram_reprogram_sdrc) + stmfd sp!, {r0 - r10, lr} @ save registers on stack + mov r3, #0x0 @ clear for mrc call + mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR + nop + nop + ldr r6, ddr_sdrc_rfr_ctrl @ get addr of refresh reg + ldr r5, [r6] @ get value + mov r5, r5, lsr #8 @ isolate rfr field and drop burst + + cmp r0, #0x1 @ going to half speed? + movne r9, #0x0 @ if up set flag up for pre up, hi volt + + blne voltage_shift_c @ adjust voltage + + cmp r0, #0x1 @ going to half speed (post branch link) + moveq r5, r5, lsr #1 @ divide by 2 if to half + movne r5, r5, lsl #1 @ mult by 2 if to full + mov r5, r5, lsl #8 @ put rfr field back into place + add r5, r5, #0x1 @ turn on burst of 1 + ldr r4, ddr_cm_clksel2_pll @ get address of out reg + ldr r3, [r4] @ get curr value + orr r3, r3, #0x3 + bic r3, r3, #0x3 @ clear lower bits + orr r3, r3, r0 @ new state value + str r3, [r4] @ set new state (pll/x, x=1 or 2) + nop + nop + + moveq r9, #0x1 @ if speed down, post down, drop volt + bleq voltage_shift_c + + mcr p15, 0, r3, c7, c10, 4 @ memory barrier + str r5, [r6] @ set new RFR_1 value + add r6, r6, #0x30 @ get RFR_2 addr + str r5, [r6] @ set RFR_2 + nop + cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL + bne freq_out @ leave if SDR, no DLL function + + /* With DDR, we need to take care of the DLL for the frequency change */ + ldr r2, ddr_sdrc_dlla_ctrl @ addr of dlla ctrl + str r1, [r2] @ write out new SDRC_DLLA_CTRL + add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL + str r1, [r2] @ commit to SDRC_DLLB_CTRL + mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks +dll_wait: + subs r1, r1, #0x1 + bne dll_wait +freq_out: + ldmfd sp!, {r0 - r10, pc} @ restore regs and return + + /* + * shift up or down voltage, use R9 as input to tell level. + * wait for it to finish, use 32k sync counter, 1tick=31uS. + */ +voltage_shift_c: + ldr r10, ddr_prcm_voltctrl @ get addr of volt ctrl + ldr r8, [r10] @ get value + ldr r7, ddr_prcm_mask_val @ get value of mask + and r8, r8, r7 @ apply mask to clear bits + orr r8, r8, r9 @ bulld value for L0/L1-volt operation. + str r8, [r10] @ set up for change. + mov r7, #0x4000 @ get val for force + orr r8, r8, r7 @ build value for force + str r8, [r10] @ Force transition to L1 + + ldr r10, ddr_timer_32ksynct @ get addr of counter + ldr r8, [r10] @ get value + add r8, r8, #0x2 @ give it at most 62uS (min 31+) +volt_delay_c: + ldr r7, [r10] @ get timer value + cmp r8, r7 @ time up? + bhi volt_delay_c @ not yet->branch + mov pc, lr @ back to caller + +ddr_cm_clksel2_pll: + .word CM_CLKSEL2_PLL_V +ddr_sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +ddr_sdrc_rfr_ctrl: + .word SDRC_RFR_CTRL_V +ddr_prcm_voltctrl: + .word PRCM_VOLTCTRL_V +ddr_prcm_mask_val: + .word 0xFFFF3FFC +ddr_timer_32ksynct: + .word TIMER_32KSYNCT_CR_V + +ENTRY(sram_reprogram_sdrc_sz) + .word . - sram_reprogram_sdrc + +/* + * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode. + */ +ENTRY(sram_set_prcm) + stmfd sp!, {r0-r12, lr} @ regs to stack + adr r4, pbegin @ addr of preload start + adr r8, pend @ addr of preload end + mcrr p15, 1, r8, r4, c12 @ preload into icache +pbegin: + /* move into fast relock bypass */ + ldr r8, pll_ctl @ get addr + ldr r5, [r8] @ get val + mvn r6, #0x3 @ clear mask + and r5, r5, r6 @ clear field + orr r7, r5, #0x2 @ fast relock val + str r7, [r8] @ go to fast relock + ldr r4, pll_stat @ addr of stat +block: + /* wait for bypass */ + ldr r8, [r4] @ stat value + and r8, r8, #0x3 @ mask for stat + cmp r8, #0x1 @ there yet + bne block @ loop if not + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div @ get addr + str r0, [r4] @ set dpll ctrl val + + ldr r4, set_config @ get addr + mov r8, #1 @ valid cfg msk + str r8, [r4] @ make dividers take + + mov r4, #100 @ dead spin a bit +wait_a_bit: + subs r4, r4, #1 @ dec loop + bne wait_a_bit @ delay done? + + /* check if staying in bypass */ + cmp r2, #0x1 @ stay in bypass? + beq pend @ jump over dpll relock + + /* relock DPLL with new vals */ + ldr r5, pll_stat @ get addr + ldr r4, pll_ctl @ get addr + orr r8, r7, #0x3 @ val for lock dpll + str r8, [r4] @ set val + mov r0, #1000 @ dead spin a bit +wait_more: + subs r0, r0, #1 @ dec loop + bne wait_more @ delay done? +wait_lock: + ldr r8, [r5] @ get lock val + and r8, r8, #3 @ isolate field + cmp r8, #2 @ locked? + bne wait_lock @ wait if not +pend: + /* update memory timings & briefly lock dll */ + ldr r4, sdrc_rfr @ get addr + str r1, [r4] @ update refresh timing + ldr r11, dlla_ctrl @ get addr of DLLA ctrl + ldr r10, [r11] @ get current val + mvn r9, #0x4 @ mask to get clear bit2 + and r10, r10, r9 @ clear bit2 for lock mode + orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) + str r10, [r11] @ commit to DLLA_CTRL + add r11, r11, #0x8 @ move to dllb + str r10, [r11] @ hit DLLB also + + mov r4, #0x800 @ relock time (min 0x400 L3 clocks) +wait_dll_lock: + subs r4, r4, #0x1 + bne wait_dll_lock + nop + ldmfd sp!, {r0-r12, pc} @ restore regs and return + +set_config: + .word PRCM_CLKCFG_CTRL_V +pll_ctl: + .word CM_CLKEN_PLL_V +pll_stat: + .word CM_IDLEST_CKGEN_V +pll_div: + .word CM_CLKSEL1_PLL_V +sdrc_rfr: + .word SDRC_RFR_CTRL_V +dlla_ctrl: + .word SDRC_DLLA_CTRL_V + +ENTRY(sram_set_prcm_sz) + .word . - sram_set_prcm diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c new file mode 100644 index 000000000000..9ec11443200f --- /dev/null +++ b/arch/arm/mach-omap2/timer-gp.c @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/mach-omap2/timer-gp.c + * + * OMAP2 GP timer support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * Juha Yrjölä <juha.yrjola@nokia.com> + * + * Some parts based off of TI's 24xx code: + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * Roughly modelled after the OMAP1 MPU timer code. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <asm/mach/time.h> +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/hardware/clock.h> + +#define OMAP2_GP_TIMER1_BASE 0x48028000 +#define OMAP2_GP_TIMER2_BASE 0x4802a000 +#define OMAP2_GP_TIMER3_BASE 0x48078000 +#define OMAP2_GP_TIMER4_BASE 0x4807a000 + +#define GP_TIMER_TIDR 0x00 +#define GP_TIMER_TISR 0x18 +#define GP_TIMER_TIER 0x1c +#define GP_TIMER_TCLR 0x24 +#define GP_TIMER_TCRR 0x28 +#define GP_TIMER_TLDR 0x2c +#define GP_TIMER_TSICR 0x40 + +#define OS_TIMER_NR 1 /* GP timer 2 */ + +static unsigned long timer_base[] = { + IO_ADDRESS(OMAP2_GP_TIMER1_BASE), + IO_ADDRESS(OMAP2_GP_TIMER2_BASE), + IO_ADDRESS(OMAP2_GP_TIMER3_BASE), + IO_ADDRESS(OMAP2_GP_TIMER4_BASE), +}; + +static inline unsigned int timer_read_reg(int nr, unsigned int reg) +{ + return __raw_readl(timer_base[nr] + reg); +} + +static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val) +{ + __raw_writel(val, timer_base[nr] + reg); +} + +/* Note that we always enable the clock prescale divider bit */ +static inline void omap2_gp_timer_start(int nr, unsigned long load_val) +{ + unsigned int tmp; + + tmp = 0xffffffff - load_val; + + timer_write_reg(nr, GP_TIMER_TLDR, tmp); + timer_write_reg(nr, GP_TIMER_TCRR, tmp); + timer_write_reg(nr, GP_TIMER_TIER, 1 << 1); + timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1); +} + +static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1); + timer_tick(regs); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction omap2_gp_timer_irq = { + .name = "gp timer", + .flags = SA_INTERRUPT, + .handler = omap2_gp_timer_interrupt, +}; + +static void __init omap2_gp_timer_init(void) +{ + struct clk * sys_ck; + u32 tick_period = 120000; + u32 l; + + /* Reset clock and prescale value */ + timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0); + + sys_ck = clk_get(NULL, "sys_ck"); + if (IS_ERR(sys_ck)) + printk(KERN_ERR "Could not get sys_ck\n"); + else { + clk_use(sys_ck); + tick_period = clk_get_rate(sys_ck) / 100; + clk_put(sys_ck); + } + + tick_period /= 2; /* Minimum prescale divider is 2 */ + tick_period -= 1; + + l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR); + printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n", + (l >> 4) & 0x0f, l & 0x0f); + + setup_irq(38, &omap2_gp_timer_irq); + + omap2_gp_timer_start(OS_TIMER_NR, tick_period); +} + +struct sys_timer omap_timer = { + .init = omap2_gp_timer_init, +}; + diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index b380a438e68f..cd506646801a 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -60,6 +60,7 @@ config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends PXA_SHARPSL_25x select PXA_SHARP_C7xx + select PXA_SSP config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" @@ -71,6 +72,12 @@ config MACH_HUSKY depends PXA_SHARPSL_25x select PXA_SHARP_C7xx +config MACH_AKITA + bool "Enable Sharp SL-1000 (Akita) Support" + depends PXA_SHARPSL_27x + select PXA_SHARP_Cxx00 + select MACH_SPITZ + config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" depends PXA_SHARPSL_27x @@ -102,12 +109,18 @@ config IWMMXT config PXA_SHARP_C7xx bool + select PXA_SSP help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool + select PXA_SSP help Enable common support for Sharp Cxx00 models +config PXA_SSP + tristate + help + Enable support for PXA2xx SSP ports endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 8bc72d07cea8..32526a0a6f86 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,8 +11,9 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o -obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o +obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o @@ -26,6 +27,7 @@ obj-$(CONFIG_LEDS) += $(led-y) # Misc features obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PXA_SSP) += ssp.o ifeq ($(CONFIG_PXA27x),y) obj-$(CONFIG_PM) += standby.o diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c new file mode 100644 index 000000000000..f6d73cc01f78 --- /dev/null +++ b/arch/arm/mach-pxa/akita-ioexp.c @@ -0,0 +1,223 @@ +/* + * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita) + * (uses a Maxim MAX7310 8 Port IO Expander) + * + * Copyright 2005 Openedhand Ltd. + * + * Author: Richard Purdie <richard@openedhand.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <asm/arch/akita.h> + +/* MAX7310 Regiser Map */ +#define MAX7310_INPUT 0x00 +#define MAX7310_OUTPUT 0x01 +#define MAX7310_POLINV 0x02 +#define MAX7310_IODIR 0x03 /* 1 = Input, 0 = Output */ +#define MAX7310_TIMEOUT 0x04 + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; + +/* I2C Magic */ +I2C_CLIENT_INSMOD; + +static int max7310_write(struct i2c_client *client, int address, int data); +static struct i2c_client max7310_template; +static void akita_ioexp_work(void *private_); + +static struct device *akita_ioexp_device; +static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT; +DECLARE_WORK(akita_ioexp, akita_ioexp_work, NULL); + + +/* + * MAX7310 Access + */ +static int max7310_config(struct device *dev, int iomode, int polarity) +{ + int ret; + struct i2c_client *client = to_i2c_client(dev); + + ret = max7310_write(client, MAX7310_POLINV, polarity); + if (ret < 0) + return ret; + ret = max7310_write(client, MAX7310_IODIR, iomode); + return ret; +} + +static int max7310_set_ouputs(struct device *dev, int outputs) +{ + struct i2c_client *client = to_i2c_client(dev); + + return max7310_write(client, MAX7310_OUTPUT, outputs); +} + +/* + * I2C Functions + */ +static int max7310_write(struct i2c_client *client, int address, int value) +{ + u8 data[2]; + + data[0] = address & 0xff; + data[1] = value & 0xff; + + if (i2c_master_send(client, data, 2) == 2) + return 0; + return -1; +} + +static int max7310_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + int err; + + if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) + return -ENOMEM; + + max7310_template.adapter = adapter; + max7310_template.addr = address; + + memcpy(new_client, &max7310_template, sizeof(struct i2c_client)); + + if ((err = i2c_attach_client(new_client))) { + kfree(new_client); + return err; + } + + max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0); + akita_ioexp_device = &new_client->dev; + schedule_work(&akita_ioexp); + + return 0; +} + +static int max7310_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_probe(adapter, &addr_data, max7310_detect); +} + +static int max7310_detach_client(struct i2c_client *client) +{ + int err; + + akita_ioexp_device = NULL; + + if ((err = i2c_detach_client(client))) + return err; + + kfree(client); + return 0; +} + +static struct i2c_driver max7310_i2c_driver = { + .owner = THIS_MODULE, + .name = "akita-max7310", + .id = I2C_DRIVERID_AKITAIOEXP, + .flags = I2C_DF_NOTIFY, + .attach_adapter = max7310_attach_adapter, + .detach_client = max7310_detach_client, +}; + +static struct i2c_client max7310_template = { + name: "akita-max7310", + flags: I2C_CLIENT_ALLOW_USE, + driver: &max7310_i2c_driver, +}; + +void akita_set_ioexp(struct device *dev, unsigned char bit) +{ + ioexp_output_value |= bit; + + if (akita_ioexp_device) + schedule_work(&akita_ioexp); + return; +} + +void akita_reset_ioexp(struct device *dev, unsigned char bit) +{ + ioexp_output_value &= ~bit; + + if (akita_ioexp_device) + schedule_work(&akita_ioexp); + return; +} + +EXPORT_SYMBOL(akita_set_ioexp); +EXPORT_SYMBOL(akita_reset_ioexp); + +static void akita_ioexp_work(void *private_) +{ + if (akita_ioexp_device) + max7310_set_ouputs(akita_ioexp_device, ioexp_output_value); +} + + +#ifdef CONFIG_PM +static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state) +{ + flush_scheduled_work(); + return 0; +} + +static int akita_ioexp_resume(struct platform_device *pdev) +{ + schedule_work(&akita_ioexp); + return 0; +} +#else +#define akita_ioexp_suspend NULL +#define akita_ioexp_resume NULL +#endif + +static int __init akita_ioexp_probe(struct platform_device *pdev) +{ + return i2c_add_driver(&max7310_i2c_driver); +} + +static int akita_ioexp_remove(struct platform_device *pdev) +{ + i2c_del_driver(&max7310_i2c_driver); + return 0; +} + +static struct platform_driver akita_ioexp_driver = { + .probe = akita_ioexp_probe, + .remove = akita_ioexp_remove, + .suspend = akita_ioexp_suspend, + .resume = akita_ioexp_resume, + .driver = { + .name = "akita-ioexp", + }, +}; + +static int __init akita_ioexp_init(void) +{ + return platform_driver_register(&akita_ioexp_driver); +} + +static void __exit akita_ioexp_exit(void) +{ + platform_driver_unregister(&akita_ioexp_driver); +} + +MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>"); +MODULE_DESCRIPTION("Akita IO-Expander driver"); +MODULE_LICENSE("GPL"); + +fs_initcall(akita_ioexp_init); +module_exit(akita_ioexp_exit); + diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index eb5f6d744a4a..100fb31b5156 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -62,6 +62,37 @@ static struct scoop_config corgi_scoop_setup = { .io_out = CORGI_SCOOP_IO_OUT, }; +struct platform_device corgiscoop_device = { + .name = "sharp-scoop", + .id = -1, + .dev = { + .platform_data = &corgi_scoop_setup, + }, + .num_resources = ARRAY_SIZE(corgi_scoop_resources), + .resource = corgi_scoop_resources, +}; + +static void corgi_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { { .dev = &corgiscoop_device.dev, @@ -71,16 +102,14 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { }, }; -struct platform_device corgiscoop_device = { - .name = "sharp-scoop", - .id = -1, - .dev = { - .platform_data = &corgi_scoop_setup, - }, - .num_resources = ARRAY_SIZE(corgi_scoop_resources), - .resource = corgi_scoop_resources, +static struct scoop_pcmcia_config corgi_pcmcia_config = { + .devs = &corgi_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = corgi_pcmcia_init, }; +EXPORT_SYMBOL(corgiscoop_device); + /* * Corgi SSP Device @@ -294,8 +323,7 @@ static void __init corgi_init(void) pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); - scoop_num = 1; - scoop_devs = &corgi_pcmcia_scoop[0]; + platform_scoop_config = &corgi_pcmcia_config; platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 54162ba95414..6dbcaf114ad7 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -19,9 +19,10 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/string.h> #include <asm/arch/akita.h> #include <asm/arch/corgi.h> -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/sharpsl.h> #include <asm/arch/spitz.h> diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c new file mode 100644 index 000000000000..599be14754f9 --- /dev/null +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -0,0 +1,228 @@ +/* + * Battery and Power Management code for the Sharp SL-C7xx + * + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/stat.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <asm/apm.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/hardware/scoop.h> + +#include <asm/arch/sharpsl.h> +#include <asm/arch/corgi.h> +#include <asm/arch/pxa-regs.h> +#include "sharpsl.h" + +static void corgi_charger_init(void) +{ + pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); + pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); +} + +static void corgi_charge_led(int val) +{ + if (val == SHARPSL_LED_ERROR) { + dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); + } else if (val == SHARPSL_LED_ON) { + dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); + GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); + } else { + dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); + GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE); + } +} + +static void corgi_measure_temp(int on) +{ + if (on) + GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); + else + GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); +} + +static void corgi_charge(int on) +{ + if (on) { + if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) { + GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } else { + GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } + } else { + GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); + GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + } +} + +static void corgi_discharge(int on) +{ + if (on) + GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); + else + GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); +} + +static void corgi_presuspend(void) +{ + int i; + unsigned long wakeup_mask; + + /* charging , so CHARGE_ON bit is HIGH during OFF. */ + if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON)) + PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON); + else + PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON); + + if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE)) + PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE); + else + PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE); + + if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN)) + PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN); + else + PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN); + + /* Resume on keyboard power key */ + PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0); + + wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL); + + if (!machine_is_corgi()) + wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW); + + PWER = wakeup_mask | PWER_RTC; + PRER = wakeup_mask; + PFER = wakeup_mask; + + for (i = 0; i <=15; i++) { + if (PRER & PFER & GPIO_bit(i)) { + if (GPLR0 & GPIO_bit(i) ) + PRER &= ~GPIO_bit(i); + else + PFER &= ~GPIO_bit(i); + } + } +} + +static void corgi_postsuspend(void) +{ +} + +/* + * Check what brought us out of the suspend. + * Return: 0 to sleep, otherwise wake + */ +static int corgi_should_wakeup(unsigned int resume_on_alarm) +{ + int is_resume = 0; + + dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR); + + if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) { + if (STATUS_AC_IN()) { + /* charge on */ + dev_dbg(sharpsl_pm.dev, "ac insert\n"); + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + } else { + /* charge off */ + dev_dbg(sharpsl_pm.dev, "ac remove\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + } + } + + if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL))) + dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n"); + + if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT)) + is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT); + + if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP)) + is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP); + + if (resume_on_alarm && (PEDR & PWER_RTC)) + is_resume |= PWER_RTC; + + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + return is_resume; +} + +static unsigned long corgi_charger_wakeup(void) +{ + return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) ); +} + +static int corgi_acin_status(void) +{ + return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); +} + +static struct sharpsl_charger_machinfo corgi_pm_machinfo = { + .init = corgi_charger_init, + .gpio_batlock = CORGI_GPIO_BAT_COVER, + .gpio_acin = CORGI_GPIO_AC_IN, + .gpio_batfull = CORGI_GPIO_CHRG_FULL, + .status_acin = corgi_acin_status, + .discharge = corgi_discharge, + .charge = corgi_charge, + .chargeled = corgi_charge_led, + .measure_temp = corgi_measure_temp, + .presuspend = corgi_presuspend, + .postsuspend = corgi_postsuspend, + .charger_wakeup = corgi_charger_wakeup, + .should_wakeup = corgi_should_wakeup, + .bat_levels = 40, + .bat_levels_noac = spitz_battery_levels_noac, + .bat_levels_acin = spitz_battery_levels_acin, + .status_high_acin = 188, + .status_low_acin = 178, + .status_high_noac = 185, + .status_low_noac = 175, +}; + +static struct platform_device *corgipm_device; + +static int __devinit corgipm_init(void) +{ + int ret; + + corgipm_device = platform_device_alloc("sharpsl-pm", -1); + if (!corgipm_device) + return -ENOMEM; + + corgipm_device->dev.platform_data = &corgi_pm_machinfo; + ret = platform_device_add(corgipm_device); + + if (ret) + platform_device_put(corgipm_device); + + return ret; +} + +static void corgipm_exit(void) +{ + platform_device_unregister(corgipm_device); +} + +module_init(corgipm_init); +module_exit(corgipm_exit); diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 591e5f32dbec..b371d723635f 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -191,7 +191,7 @@ void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) ssp_machinfo = machinfo; } -static int __init corgi_ssp_probe(struct device *dev) +static int __init corgi_ssp_probe(struct platform_device *dev) { int ret; @@ -203,7 +203,7 @@ static int __init corgi_ssp_probe(struct device *dev) GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846); /* output */ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port); + ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); if (ret) printk(KERN_ERR "Unable to register SSP handler!\n"); @@ -216,13 +216,13 @@ static int __init corgi_ssp_probe(struct device *dev) return ret; } -static int corgi_ssp_remove(struct device *dev) +static int corgi_ssp_remove(struct platform_device *dev) { ssp_exit(&corgi_ssp_dev); return 0; } -static int corgi_ssp_suspend(struct device *dev, pm_message_t state) +static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) { ssp_flush(&corgi_ssp_dev); ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); @@ -230,7 +230,7 @@ static int corgi_ssp_suspend(struct device *dev, pm_message_t state) return 0; } -static int corgi_ssp_resume(struct device *dev) +static int corgi_ssp_resume(struct platform_device *dev) { GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ @@ -241,18 +241,19 @@ static int corgi_ssp_resume(struct device *dev) return 0; } -static struct device_driver corgissp_driver = { - .name = "corgi-ssp", - .bus = &platform_bus_type, +static struct platform_driver corgissp_driver = { .probe = corgi_ssp_probe, .remove = corgi_ssp_remove, .suspend = corgi_ssp_suspend, .resume = corgi_ssp_resume, + .driver = { + .name = "corgi-ssp", + }, }; int __init corgi_ssp_init(void) { - return driver_register(&corgissp_driver); + return platform_driver_register(&corgissp_driver); } arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index ad6a13f95a62..eef3de26ad37 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; +static void poodle_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { { .dev = &poodle_scoop_device.dev, @@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config poodle_pcmcia_config = { + .devs = &poodle_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = poodle_pcmcia_init, +}; + +EXPORT_SYMBOL(poodle_scoop_device); + /* LoCoMo device */ static struct resource locomo_resources[] = { @@ -268,8 +297,7 @@ static void __init poodle_init(void) pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); - scoop_num = 1; - scoop_devs = &poodle_pcmcia_scoop[0]; + platform_scoop_config = &poodle_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 3977a77aacdd..b0c40a1d6671 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -32,3 +32,90 @@ void corgi_put_hsync(void); void spitz_put_hsync(void); void corgi_wait_hsync(void); void spitz_wait_hsync(void); + +/* + * SharpSL Battery/PM Driver + */ + +struct sharpsl_charger_machinfo { + void (*init)(void); + int gpio_acin; + int gpio_batfull; + int gpio_batlock; + int gpio_fatal; + int (*status_acin)(void); + void (*discharge)(int); + void (*discharge1)(int); + void (*charge)(int); + void (*chargeled)(int); + void (*measure_temp)(int); + void (*presuspend)(void); + void (*postsuspend)(void); + unsigned long (*charger_wakeup)(void); + int (*should_wakeup)(unsigned int resume_on_alarm); + int bat_levels; + struct battery_thresh *bat_levels_noac; + struct battery_thresh *bat_levels_acin; + int status_high_acin; + int status_low_acin; + int status_high_noac; + int status_low_noac; +}; + +struct battery_thresh { + int voltage; + int percentage; +}; + +struct battery_stat { + int ac_status; /* APM AC Present/Not Present */ + int mainbat_status; /* APM Main Battery Status */ + int mainbat_percent; /* Main Battery Percentage Charge */ + int mainbat_voltage; /* Main Battery Voltage */ +}; + +struct sharpsl_pm_status { + struct device *dev; + struct timer_list ac_timer; + struct timer_list chrg_full_timer; + + int charge_mode; +#define CHRG_ERROR (-1) +#define CHRG_OFF (0) +#define CHRG_ON (1) +#define CHRG_DONE (2) + + unsigned int flags; +#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ +#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ +#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ +#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ +#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ + + int full_count; + unsigned long charge_start_time; + struct sharpsl_charger_machinfo *machinfo; + struct battery_stat battstat; +}; + +extern struct sharpsl_pm_status sharpsl_pm; +extern struct battery_thresh spitz_battery_levels_acin[]; +extern struct battery_thresh spitz_battery_levels_noac[]; + +#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) + +#define SHARPSL_LED_ERROR 2 +#define SHARPSL_LED_ON 1 +#define SHARPSL_LED_OFF 0 + +#define CHARGE_ON() sharpsl_pm.machinfo->charge(1) +#define CHARGE_OFF() sharpsl_pm.machinfo->charge(0) +#define CHARGE_LED_ON() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON) +#define CHARGE_LED_OFF() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF) +#define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR) +#define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1) +#define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0) +#define STATUS_AC_IN() sharpsl_pm.machinfo->status_acin() +#define STATUS_BATT_LOCKED() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) +#define STATUS_CHRG_FULL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) +#define STATUS_FATAL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c new file mode 100644 index 000000000000..c10be00fb526 --- /dev/null +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -0,0 +1,997 @@ +/* + * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 + * series of PDAs + * + * Copyright (c) 2004-2005 Richard Purdie + * + * Based on code written by Sharp for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#undef DEBUG + +#include <linux/module.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/apm_bios.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/hardware/scoop.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/apm.h> + +#include <asm/arch/pm.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/sharpsl.h> +#include "sharpsl.h" + +/* + * Constants + */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ +#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ +#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ +#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ +#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ +#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ +#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ +#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ + +#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ +#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ +#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ +#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ +#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ + +struct battery_thresh spitz_battery_levels_acin[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 192, 45}, + { 191, 43}, + { 191, 40}, + { 190, 38}, + { 190, 35}, + { 189, 33}, + { 188, 30}, + { 187, 28}, + { 186, 25}, + { 185, 23}, + { 184, 20}, + { 183, 18}, + { 182, 15}, + { 181, 13}, + { 180, 10}, + { 179, 8}, + { 178, 5}, + { 0, 0}, +}; + +struct battery_thresh spitz_battery_levels_noac[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 191, 45}, + { 190, 43}, + { 189, 40}, + { 188, 38}, + { 187, 35}, + { 186, 33}, + { 185, 30}, + { 184, 28}, + { 183, 25}, + { 182, 23}, + { 181, 20}, + { 180, 18}, + { 179, 15}, + { 178, 13}, + { 177, 10}, + { 176, 8}, + { 175, 5}, + { 0, 0}, +}; + +/* MAX1111 Commands */ +#define MAXCTRL_PD0 1u << 0 +#define MAXCTRL_PD1 1u << 1 +#define MAXCTRL_SGL 1u << 2 +#define MAXCTRL_UNI 1u << 3 +#define MAXCTRL_SEL_SH 4 +#define MAXCTRL_STR 1u << 7 + +/* MAX1111 Channel Definitions */ +#define BATT_AD 4u +#define BATT_THM 2u +#define JK_VAD 6u + + +/* + * Prototypes + */ +static int sharpsl_read_main_battery(void); +static int sharpsl_off_charge_battery(void); +static int sharpsl_check_battery_temp(void); +static int sharpsl_check_battery_voltage(void); +static int sharpsl_ac_check(void); +static int sharpsl_fatal_check(void); +static int sharpsl_average_value(int ad); +static void sharpsl_average_clear(void); +static void sharpsl_charge_toggle(void *private_); +static void sharpsl_battery_thread(void *private_); + + +/* + * Variables + */ +struct sharpsl_pm_status sharpsl_pm; +DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL); +DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL); + + +static int get_percentage(int voltage) +{ + int i = sharpsl_pm.machinfo->bat_levels - 1; + struct battery_thresh *thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) + thresh=sharpsl_pm.machinfo->bat_levels_acin; + else + thresh=sharpsl_pm.machinfo->bat_levels_noac; + + while (i > 0 && (voltage > thresh[i].voltage)) + i--; + + return thresh[i].percentage; +} + +static int get_apm_status(int voltage) +{ + int low_thresh, high_thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) { + high_thresh = sharpsl_pm.machinfo->status_high_acin; + low_thresh = sharpsl_pm.machinfo->status_low_acin; + } else { + high_thresh = sharpsl_pm.machinfo->status_high_noac; + low_thresh = sharpsl_pm.machinfo->status_low_noac; + } + + if (voltage >= high_thresh) + return APM_BATTERY_STATUS_HIGH; + if (voltage >= low_thresh) + return APM_BATTERY_STATUS_LOW; + return APM_BATTERY_STATUS_CRITICAL; +} + +void sharpsl_battery_kick(void) +{ + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); +} +EXPORT_SYMBOL(sharpsl_battery_kick); + + +static void sharpsl_battery_thread(void *private_) +{ + int voltage, percent, apm_status, i = 0; + + if (!sharpsl_pm.machinfo) + return; + + sharpsl_pm.battstat.ac_status = (STATUS_AC_IN() ? APM_AC_ONLINE : APM_AC_OFFLINE); + + /* Corgi cannot confirm when battery fully charged so periodically kick! */ + if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) + && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) + schedule_work(&toggle_charger); + + while(1) { + voltage = sharpsl_read_main_battery(); + if (voltage > 0) break; + if (i++ > 5) { + voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; + dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); + break; + } + } + + voltage = sharpsl_average_value(voltage); + apm_status = get_apm_status(voltage); + percent = get_percentage(voltage); + + /* At low battery voltages, the voltage has a tendency to start + creeping back up so we try to avoid this here */ + if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { + sharpsl_pm.battstat.mainbat_voltage = voltage; + sharpsl_pm.battstat.mainbat_status = apm_status; + sharpsl_pm.battstat.mainbat_percent = percent; + } + + dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, + sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); + + /* If battery is low. limit backlight intensity to save power. */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || + (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { + if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { + corgibl_limit_intensity(1); + sharpsl_pm.flags |= SHARPSL_BL_LIMIT; + } + } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { + corgibl_limit_intensity(0); + sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; + } + + /* Suspend if critical battery level */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) + && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + dev_err(sharpsl_pm.dev, "Fatal Off\n"); + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); +} + +static void sharpsl_charge_on(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); + + sharpsl_pm.full_count = 0; + sharpsl_pm.charge_mode = CHRG_ON; + schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); +} + +static void sharpsl_charge_off(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); + + CHARGE_OFF(); + CHARGE_LED_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + + schedule_work(&sharpsl_bat); +} + +static void sharpsl_charge_error(void) +{ + CHARGE_LED_ERR(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_ERROR; +} + +static void sharpsl_charge_toggle(void *private_) +{ + dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); + + if (STATUS_AC_IN() == 0) { + sharpsl_charge_off(); + return; + } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { + sharpsl_charge_error(); + return; + } + + CHARGE_LED_ON(); + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + + sharpsl_pm.charge_start_time = jiffies; +} + +static void sharpsl_ac_timer(unsigned long data) +{ + int acin = STATUS_AC_IN(); + + dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); + + sharpsl_average_clear(); + if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) + sharpsl_charge_on(); + else if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + + schedule_work(&sharpsl_bat); +} + + +static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + /* Delay the event slightly to debounce */ + /* Must be a smaller delay than the chrg_full_isr below */ + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static void sharpsl_chrg_full_timer(unsigned long data) +{ + dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); + + sharpsl_pm.full_count++; + + if (STATUS_AC_IN() == 0) { + dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + } else if (sharpsl_pm.full_count < 2) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); + schedule_work(&toggle_charger); + } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); + schedule_work(&toggle_charger); + } else { + sharpsl_charge_off(); + sharpsl_pm.charge_mode = CHRG_DONE; + dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); + } +} + +/* Charging Finished Interrupt (Not present on Corgi) */ +/* Can trigger at the same time as an AC staus change so + delay until after that has been processed */ +static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) + return IRQ_HANDLED; + + /* delay until after any ac interrupt */ + mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + +static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + int is_fatal = 0; + + if (STATUS_BATT_LOCKED() == 0) { + dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); + is_fatal = 1; + } + + if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL() == 0)) { + dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); + is_fatal = 1; + } + + if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + return IRQ_HANDLED; +} + +/* + * Maintain an average of the last 10 readings + */ +#define SHARPSL_CNV_VALUE_NUM 10 +static int sharpsl_ad_index; + +static void sharpsl_average_clear(void) +{ + sharpsl_ad_index = 0; +} + +static int sharpsl_average_value(int ad) +{ + int i, ad_val = 0; + static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; + + if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { + sharpsl_ad_index = 0; + return ad; + } + + sharpsl_ad[sharpsl_ad_index] = ad; + sharpsl_ad_index++; + if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { + for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) + sharpsl_ad[i] = sharpsl_ad[i+1]; + sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; + } + for (i=0; i < sharpsl_ad_index; i++) + ad_val += sharpsl_ad[i]; + + return (ad_val / sharpsl_ad_index); +} + + +/* + * Read MAX1111 ADC + */ +static int read_max1111(int channel) +{ + return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 + | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); +} + +static int sharpsl_read_main_battery(void) +{ + return read_max1111(BATT_AD); +} + +static int sharpsl_read_temp(void) +{ + int temp; + + sharpsl_pm.machinfo->measure_temp(1); + + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + temp = read_max1111(BATT_THM); + + sharpsl_pm.machinfo->measure_temp(0); + + return temp; +} + +static int sharpsl_read_acin(void) +{ + return read_max1111(JK_VAD); +} + +/* + * Take an array of 5 integers, remove the maximum and minimum values + * and return the average. + */ +static int get_select_val(int *val) +{ + int i, j, k, temp, sum = 0; + + /* Find MAX val */ + temp = val[0]; + j=0; + for (i=1; i<5; i++) { + if (temp < val[i]) { + temp = val[i]; + j = i; + } + } + + /* Find MIN val */ + temp = val[4]; + k=4; + for (i=3; i>=0; i--) { + if (temp > val[i]) { + temp = val[i]; + k = i; + } + } + + for (i=0; i<5; i++) + if (i != j && i != k ) + sum += val[i]; + + dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); + + return (sum/3); +} + +static int sharpsl_check_battery_temp(void) +{ + int val, i, buff[5]; + + /* Check battery temperature */ + for (i=0; i<5; i++) { + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + buff[i] = sharpsl_read_temp(); + } + + val = get_select_val(buff); + + dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); + if (val > SHARPSL_CHARGE_ON_TEMP) + return -1; + + return 0; +} + +static int sharpsl_check_battery_voltage(void) +{ + int val, i, buff[5]; + + /* disable charge, enable discharge */ + CHARGE_OFF(); + DISCHARGE_ON(); + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery voltage */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_main_battery(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + DISCHARGE_OFF(); + + val = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); + + if (val < SHARPSL_CHARGE_ON_VOLT) + return -1; + + return 0; +} + +static int sharpsl_ac_check(void) +{ + int temp, i, buff[5]; + + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_acin(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); + + if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) { + dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); + return -1; + } + + return 0; +} + +#ifdef CONFIG_PM +static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) +{ + sharpsl_pm.flags |= SHARPSL_SUSPENDED; + flush_scheduled_work(); + + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + else + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + + return 0; +} + +static int sharpsl_pm_resume(struct platform_device *pdev) +{ + /* Clear the reset source indicators as they break the bootloader upon reboot */ + RCSR = 0x0f; + sharpsl_average_clear(); + sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; + sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; + + return 0; +} + +static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); + + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + /* not charging and AC-IN! */ + + if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN() != 0)) { + dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + sharpsl_off_charge_battery(); + } + + sharpsl_pm.machinfo->presuspend(); + + PEDR = 0xffffffff; /* clear it */ + + sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; + if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { + RTSR &= RTSR_ALE; + RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; + dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); + sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; + } else if (alarm_enable) { + RTSR &= RTSR_ALE; + RTAR = alarm_time; + dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); + } else { + dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); + } + + pxa_pm_enter(state); + + sharpsl_pm.machinfo->postsuspend(); + + dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); +} + +static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) + { + if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { + dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + if(sharpsl_off_charge_battery()) { + dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); + } + + if ((STATUS_BATT_LOCKED() == 0) || (sharpsl_fatal_check() < 0) ) + { + dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + + return 0; +} + +static int corgi_pxa_pm_enter(suspend_state_t state) +{ + unsigned long alarm_time = RTAR; + unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); + + dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); + + corgi_goto_sleep(alarm_time, alarm_status, state); + + while (corgi_enter_suspend(alarm_time,alarm_status,state)) + {} + + dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); + + return 0; +} +#endif + + +/* + * Check for fatal battery errors + * Fatal returns -1 + */ +static int sharpsl_fatal_check(void) +{ + int buff[5], temp, i, acin; + + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); + + /* Check AC-Adapter */ + acin = STATUS_AC_IN(); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + CHARGE_OFF(); + udelay(100); + DISCHARGE_ON(); /* enable discharge */ + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery : check inserting battery ? */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_main_battery(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + udelay(100); + CHARGE_ON(); + DISCHARGE_OFF(); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_main_battery()); + + if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || + (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) + return -1; + return 0; +} + +static int sharpsl_off_charge_error(void) +{ + dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); + CHARGE_OFF(); + CHARGE_LED_ERR(); + sharpsl_pm.charge_mode = CHRG_ERROR; + return 1; +} + +/* + * Charging Control while suspended + * Return 1 - go straight to sleep + * Return 0 - sleep or wakeup depending on other factors + */ +static int sharpsl_off_charge_battery(void) +{ + int time; + + dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); + + if (sharpsl_pm.charge_mode == CHRG_OFF) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); + + /* AC Check */ + if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) + return sharpsl_off_charge_error(); + + /* Start Charging */ + CHARGE_LED_ON(); + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + + sharpsl_pm.charge_mode = CHRG_ON; + sharpsl_pm.full_count = 0; + + return 1; + } else if (sharpsl_pm.charge_mode != CHRG_ON) { + return 1; + } + + if (sharpsl_pm.full_count == 0) { + int time; + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); + + if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) + return sharpsl_off_charge_error(); + + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + sharpsl_pm.charge_mode = CHRG_ON; + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) + return 1; + if (STATUS_CHRG_FULL()) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); + sharpsl_pm.full_count++; + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + return 1; + } + } + } + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { + if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); + sharpsl_pm.full_count = 0; + } + sharpsl_pm.full_count++; + return 1; + } + if (STATUS_CHRG_FULL()) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_DONE; + return 1; + } + } +} + + +static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); +} + +static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); +} + +static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); +static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); + +extern void (*apm_get_power_status)(struct apm_power_info *); + +static void sharpsl_apm_get_power_status(struct apm_power_info *info) +{ + info->ac_line_status = sharpsl_pm.battstat.ac_status; + + if (sharpsl_pm.charge_mode == CHRG_ON) + info->battery_status = APM_BATTERY_STATUS_CHARGING; + else + info->battery_status = sharpsl_pm.battstat.mainbat_status; + + info->battery_flag = (1 << info->battery_status); + info->battery_life = sharpsl_pm.battstat.mainbat_percent; +} + +static struct pm_ops sharpsl_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .prepare = pxa_pm_prepare, + .enter = corgi_pxa_pm_enter, + .finish = pxa_pm_finish, +}; + +static int __init sharpsl_pm_probe(struct platform_device *pdev) +{ + if (!pdev->dev.platform_data) + return -EINVAL; + + sharpsl_pm.dev = &pdev->dev; + sharpsl_pm.machinfo = pdev->dev.platform_data; + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags = 0; + + sharpsl_pm.machinfo->init(); + + init_timer(&sharpsl_pm.ac_timer); + sharpsl_pm.ac_timer.function = sharpsl_ac_timer; + + init_timer(&sharpsl_pm.chrg_full_timer); + sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; + + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN); + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN); + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN); + + /* Register interrupt handlers */ + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE); + + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING); + + if (sharpsl_pm.machinfo->gpio_fatal) { + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); + } + + if (!machine_is_corgi()) + { + /* Register interrupt handler. */ + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); + } + + device_create_file(&pdev->dev, &dev_attr_battery_percentage); + device_create_file(&pdev->dev, &dev_attr_battery_voltage); + + apm_get_power_status = sharpsl_apm_get_power_status; + + pm_set_ops(&sharpsl_pm_ops); + + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return 0; +} + +static int sharpsl_pm_remove(struct platform_device *pdev) +{ + pm_set_ops(NULL); + + device_remove_file(&pdev->dev, &dev_attr_battery_percentage); + device_remove_file(&pdev->dev, &dev_attr_battery_voltage); + + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); + + if (sharpsl_pm.machinfo->gpio_fatal) + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); + + if (!machine_is_corgi()) + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); + + del_timer_sync(&sharpsl_pm.chrg_full_timer); + del_timer_sync(&sharpsl_pm.ac_timer); + + return 0; +} + +static struct platform_driver sharpsl_pm_driver = { + .probe = sharpsl_pm_probe, + .remove = sharpsl_pm_remove, + .suspend = sharpsl_pm_suspend, + .resume = sharpsl_pm_resume, + .driver = { + .name = "sharpsl-pm", + }, +}; + +static int __devinit sharpsl_pm_init(void) +{ + return platform_driver_register(&sharpsl_pm_driver); +} + +static void sharpsl_pm_exit(void) +{ + platform_driver_unregister(&sharpsl_pm_driver); +} + +late_initcall(sharpsl_pm_init); +module_exit(sharpsl_pm_exit); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6c6878cd2207..2df1b56615b1 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = { .resource = spitz_scoop2_resources, }; +#define SPITZ_PWR_SD 0x01 +#define SPITZ_PWR_CF 0x02 + +/* Power control is shared with between one of the CF slots and SD */ +static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) +{ + unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + + if (new_cpr & 0x0007) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) + mdelay(5); + if (device == SPITZ_PWR_CF) + cpr |= 0x0002; + if (device == SPITZ_PWR_SD) + cpr |= 0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + } else { + if (device == SPITZ_PWR_CF) + cpr &= ~0x0002; + if (device == SPITZ_PWR_SD) + cpr &= ~0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) { + mdelay(1); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } + } +} + +static void spitz_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2); + GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO85_nPCE_1_MD); + pxa_gpio_mode(GPIO54_nPCE_2_MD); + pxa_gpio_mode(GPIO104_pSKTSEL_MD); +} + +static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) +{ + /* Only need to override behaviour for slot 0 */ + if (nr == 0) + spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); + else + write_scoop_reg(scoop, SCOOP_CPR, cpr); +} + static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { { .dev = &spitzscoop_device.dev, @@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config spitz_pcmcia_config = { + .devs = &spitz_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = spitz_pcmcia_init, + .power_ctrl = spitz_pcmcia_pwr, +}; + +EXPORT_SYMBOL(spitzscoop_device); +EXPORT_SYMBOL(spitzscoop2_device); + /* * Spitz SSP Device @@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in return 0; } -/* Power control is shared with one of the CF slots so we have a mess */ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); - - if (( 1 << vdd) & p_d->ocr_mask) { - /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */ - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - mdelay(2); - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04); - } else { - /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */ - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04); - - if (!(cpr | 0x02)) { - mdelay(1); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - } - } + if (( 1 << vdd) & p_d->ocr_mask) + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); + else + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); } static int spitz_mci_get_ro(struct device *dev) @@ -288,6 +345,16 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode) reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); } +#ifdef CONFIG_MACH_AKITA +static void akita_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); + else + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); +} +#endif + static struct pxaficp_platform_data spitz_ficp_platform_data = { .transceiver_cap = IR_SIRMODE | IR_OFF, .transceiver_mode = spitz_irda_transceiver_mode, @@ -351,8 +418,8 @@ static void __init common_init(void) static void __init spitz_init(void) { - scoop_num = 2; - scoop_devs = &spitz_pcmcia_scoop[0]; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; common_init(); @@ -360,6 +427,32 @@ static void __init spitz_init(void) platform_device_register(&spitzscoop2_device); } +#ifdef CONFIG_MACH_AKITA +/* + * Akita IO Expander + */ +struct platform_device akitaioexp_device = { + .name = "akita-ioexp", + .id = -1, +}; + +static void __init akita_init(void) +{ + spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; + + /* We just pretend the second element of the array doesn't exist */ + spitz_pcmcia_config.num_devs = 1; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity; + + platform_device_register(&akitaioexp_device); + + spitzscoop_device.dev.parent = &akitaioexp_device.dev; + common_init(); +} +#endif + + static void __init fixup_spitz(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { @@ -395,3 +488,16 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .timer = &pxa_timer, MACHINE_END #endif + +#ifdef CONFIG_MACH_AKITA +MACHINE_START(AKITA, "SHARP Akita") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_spitz, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = akita_init, + .timer = &pxa_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c new file mode 100644 index 000000000000..3ce7486daa51 --- /dev/null +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -0,0 +1,233 @@ +/* + * Battery and Power Management code for the Sharp SL-Cxx00 + * + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/stat.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <asm/apm.h> +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/hardware/scoop.h> + +#include <asm/arch/sharpsl.h> +#include <asm/arch/spitz.h> +#include <asm/arch/pxa-regs.h> +#include "sharpsl.h" + +static int spitz_last_ac_status; + +static void spitz_charger_init(void) +{ + pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); + pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); +} + +static void spitz_charge_led(int val) +{ + if (val == SHARPSL_LED_ERROR) { + dev_dbg(sharpsl_pm.dev, "Charge LED Error\n"); + } else if (val == SHARPSL_LED_ON) { + dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); + } else { + dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE); + } +} + +static void spitz_measure_temp(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); +} + +static void spitz_charge(int on) +{ + if (on) { + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } else { + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } + } else { + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + } +} + +static void spitz_discharge(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); +} + +/* HACK - For unknown reasons, accurate voltage readings are only made with a load + on the power bus which the green led on spitz provides */ +static void spitz_discharge1(int on) +{ + if (on) + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); + else + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); +} + +static void spitz_presuspend(void) +{ + spitz_last_ac_status = STATUS_AC_IN(); + + /* GPIO Sleep Register */ + PGSR0 = 0x00144018; + PGSR1 = 0x00EF0000; + if (machine_is_akita()) { + PGSR2 = 0x2121C000; + PGSR3 = 0x00600400; + } else { + PGSR2 = 0x0121C000; + PGSR3 = 0x00600000; + } + + PGSR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; + PGSR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; + PGSR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; + PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; + PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); + + pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); + + PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); + PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); + PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC; + PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); + PKSR = 0xffffffff; // clear + + /* nRESET_OUT Disable */ + PSLR |= PSLR_SL_ROD; + + /* Clear reset status */ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR = PCFR_GPR_EN | PCFR_OPDE; +} + +static void spitz_postsuspend(void) +{ + pxa_gpio_mode(GPIO18_RDY_MD); + pxa_gpio_mode(10 | GPIO_IN); +} + +static int spitz_should_wakeup(unsigned int resume_on_alarm) +{ + int is_resume = 0; + int acin = STATUS_AC_IN(); + + if (spitz_last_ac_status != acin) { + if (acin) { + /* charge on */ + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + dev_dbg(sharpsl_pm.dev, "AC Inserted\n"); + } else { + /* charge off */ + dev_dbg(sharpsl_pm.dev, "AC Removed\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + } + spitz_last_ac_status = acin; + /* Return to suspend as this must be what we were woken for */ + return 0; + } + + if (PEDR & GPIO_bit(SPITZ_GPIO_KEY_INT)) + is_resume |= GPIO_bit(SPITZ_GPIO_KEY_INT); + + if (PKSR & GPIO_bit(SPITZ_GPIO_SYNC)) + is_resume |= GPIO_bit(SPITZ_GPIO_SYNC); + + if (resume_on_alarm && (PEDR & PWER_RTC)) + is_resume |= PWER_RTC; + + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + return is_resume; +} + +static unsigned long spitz_charger_wakeup(void) +{ + return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); +} + +static int spitz_acin_status(void) +{ + return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); +} + +struct sharpsl_charger_machinfo spitz_pm_machinfo = { + .init = spitz_charger_init, + .gpio_batlock = SPITZ_GPIO_BAT_COVER, + .gpio_acin = SPITZ_GPIO_AC_IN, + .gpio_batfull = SPITZ_GPIO_CHRG_FULL, + .gpio_fatal = SPITZ_GPIO_FATAL_BAT, + .status_acin = spitz_acin_status, + .discharge = spitz_discharge, + .discharge1 = spitz_discharge1, + .charge = spitz_charge, + .chargeled = spitz_charge_led, + .measure_temp = spitz_measure_temp, + .presuspend = spitz_presuspend, + .postsuspend = spitz_postsuspend, + .charger_wakeup = spitz_charger_wakeup, + .should_wakeup = spitz_should_wakeup, + .bat_levels = 40, + .bat_levels_noac = spitz_battery_levels_noac, + .bat_levels_acin = spitz_battery_levels_acin, + .status_high_acin = 188, + .status_low_acin = 178, + .status_high_noac = 185, + .status_low_noac = 175, +}; + +static struct platform_device *spitzpm_device; + +static int __devinit spitzpm_init(void) +{ + int ret; + + spitzpm_device = platform_device_alloc("sharpsl-pm", -1); + if (!spitzpm_device) + return -ENOMEM; + + spitzpm_device->dev.platform_data = &spitz_pm_machinfo; + ret = platform_device_add(spitzpm_device); + + if (ret) + platform_device_put(spitzpm_device); + + return ret; +} + +static void spitzpm_exit(void) +{ + platform_device_unregister(spitzpm_device); +} + +module_init(spitzpm_init); +module_exit(spitzpm_exit); diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 4d826c021315..a68b30eff4d2 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -19,6 +19,8 @@ * 22nd Aug 2003 Initial version. * 20th Dec 2004 Added ssp_config for changing port config without * closing the port. + * 4th Aug 2005 Added option to disable irq handler registration and + * cleaned up irq and clock detection. */ #include <linux/module.h> @@ -37,6 +39,26 @@ #define PXA_SSP_PORTS 3 +struct ssp_info_ { + int irq; + u32 clock; +}; + +/* + * SSP port clock and IRQ settings + */ +static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = { +#if defined (CONFIG_PXA27x) + {IRQ_SSP, CKEN23_SSP1}, + {IRQ_SSP2, CKEN3_SSP2}, + {IRQ_SSP3, CKEN4_SSP3}, +#else + {IRQ_SSP, CKEN3_SSP}, + {IRQ_NSSP, CKEN9_NSSP}, + {IRQ_ASSP, CKEN10_ASSP}, +#endif +}; + static DECLARE_MUTEX(sem); static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; @@ -210,9 +232,9 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee * %-EBUSY if the resources are already in use * %0 on success */ -int ssp_init(struct ssp_dev *dev, u32 port) +int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) { - int ret, irq; + int ret; if (port > PXA_SSP_PORTS || port == 0) return -ENODEV; @@ -229,61 +251,20 @@ int ssp_init(struct ssp_dev *dev, u32 port) up(&sem); return -EBUSY; } - - switch (port) { - case 1: - irq = IRQ_SSP; - break; -#if defined (CONFIG_PXA27x) - case 2: - irq = IRQ_SSP2; - break; - case 3: - irq = IRQ_SSP3; - break; -#else - case 2: - irq = IRQ_NSSP; - break; - case 3: - irq = IRQ_ASSP; - break; -#endif - default: - return -ENODEV; - } - dev->port = port; - ret = request_irq(irq, ssp_interrupt, 0, "SSP", dev); - if (ret) - goto out_region; + /* do we need to get irq */ + if (!(init_flags & SSP_NO_IRQ)) { + ret = request_irq(ssp_info[port-1].irq, ssp_interrupt, + 0, "SSP", dev); + if (ret) + goto out_region; + dev->irq = ssp_info[port-1].irq; + } else + dev->irq = 0; /* turn on SSP port clock */ - switch (dev->port) { -#if defined (CONFIG_PXA27x) - case 1: - pxa_set_cken(CKEN23_SSP1, 1); - break; - case 2: - pxa_set_cken(CKEN3_SSP2, 1); - break; - case 3: - pxa_set_cken(CKEN4_SSP3, 1); - break; -#else - case 1: - pxa_set_cken(CKEN3_SSP, 1); - break; - case 2: - pxa_set_cken(CKEN9_NSSP, 1); - break; - case 3: - pxa_set_cken(CKEN10_ASSP, 1); - break; -#endif - } - + pxa_set_cken(ssp_info[port-1].clock, 1); up(&sem); return 0; @@ -301,46 +282,17 @@ out_region: */ void ssp_exit(struct ssp_dev *dev) { - int irq; - down(&sem); SSCR0_P(dev->port) &= ~SSCR0_SSE; - /* find irq, save power and turn off SSP port clock */ - switch (dev->port) { -#if defined (CONFIG_PXA27x) - case 1: - irq = IRQ_SSP; - pxa_set_cken(CKEN23_SSP1, 0); - break; - case 2: - irq = IRQ_SSP2; - pxa_set_cken(CKEN3_SSP2, 0); - break; - case 3: - irq = IRQ_SSP3; - pxa_set_cken(CKEN4_SSP3, 0); - break; -#else - case 1: - irq = IRQ_SSP; - pxa_set_cken(CKEN3_SSP, 0); - break; - case 2: - irq = IRQ_NSSP; - pxa_set_cken(CKEN9_NSSP, 0); - break; - case 3: - irq = IRQ_ASSP; - pxa_set_cken(CKEN10_ASSP, 0); - break; -#endif - default: - printk(KERN_WARNING "SSP: tried to close invalid port\n"); - return; + if (dev->port > PXA_SSP_PORTS || dev->port == 0) { + printk(KERN_WARNING "SSP: tried to close invalid port\n"); + return; } - free_irq(irq, dev); + pxa_set_cken(ssp_info[dev->port-1].clock, 0); + if (dev->irq) + free_irq(dev->irq, dev); release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c); use_count[dev->port - 1]--; up(&sem); diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 7dad3f1465e0..b9b2057349eb 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -132,11 +132,13 @@ static void __init pxa_timer_init(void) tv.tv_sec = pxa_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &pxa_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 400609f8b6a8..c312054dfb88 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -98,6 +98,9 @@ struct platform_device tosascoop_jc_device = { .resource = tosa_scoop_jc_resources, }; +/* + * PCMCIA + */ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { { .dev = &tosascoop_device.dev, @@ -111,16 +114,155 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { }, }; +static void tosa_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + +static struct scoop_pcmcia_config tosa_pcmcia_config = { + .devs = &tosa_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = tosa_pcmcia_init, +}; + +/* + * USB Device Controller + */ +static void tosa_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + } +} + +static int tosa_udc_is_connected(void) +{ + return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0); +} + + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + .udc_command = tosa_udc_command, + .udc_is_connected = tosa_udc_is_connected, +}; + +/* + * MMC/SD Device + */ +static struct pxamci_platform_data tosa_mci_platform_data; + +static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); + + tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT, + "MMC/SD card detect", data); + if (err) { + printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void tosa_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) { + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } else { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } +} + +static int tosa_mci_get_ro(struct device *dev) +{ + return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); +} + +static void tosa_mci_exit(struct device *dev, void *data) +{ + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data tosa_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = tosa_mci_init, + .get_ro = tosa_mci_get_ro, + .setpower = tosa_mci_setpower, + .exit = tosa_mci_exit, +}; + +/* + * Irda + */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); + pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); + } else { + pxa_gpio_mode(GPIO47_STTXD_MD); + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + } +} + +static struct pxaficp_platform_data tosa_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = tosa_irda_transceiver_mode, +}; + +/* + * Tosa Keyboard + */ +static struct platform_device tosakbd_device = { + .name = "tosa-keyboard", + .id = -1, +}; static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, + &tosakbd_device, }; static void __init tosa_init(void) { pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); /* setup sleep mode values */ PWER = 0x00000002; @@ -131,13 +273,15 @@ static void __init tosa_init(void) PGSR2 = 0x00014000; PCFR |= PCFR_OPDE; - // enable batt_fault + /* enable batt_fault */ PMCR = 0x01; - platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_mci_info(&tosa_mci_platform_data); + pxa_set_udc_info(&udc_info); + pxa_set_ficp_info(&tosa_ficp_platform_data); + platform_scoop_config = &tosa_pcmcia_config; - scoop_num = 2; - scoop_devs = &tosa_pcmcia_scoop[0]; + platform_add_devices(devices, ARRAY_SIZE(devices)); } static void __init fixup_tosa(struct machine_desc *desc, diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 4b63dc9eabfe..129976866d47 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -8,4 +8,13 @@ config MACH_REALVIEW_EB help Include support for the ARM(R) RealView Emulation Baseboard platform. +config REALVIEW_MPCORE + bool "Support MPcore tile" + depends on MACH_REALVIEW_EB + help + Enable support for the MPCore tile on the Realview platform. + Since there are device address and interrupt differences, a + kernel built with this option enabled is not compatible with + other tiles. + endmenu diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 8d37ea1605fd..36e76ba937fc 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -4,3 +4,6 @@ obj-y := core.o clock.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 482eb512ebe8..e2c6fa23d3cd 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -550,6 +550,11 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_reg timer_tick(regs); +#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS) + smp_send_timer(); + update_process_times(user_mode(regs)); +#endif + write_sequnlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 575599db74db..c06e6041df41 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -23,10 +23,9 @@ #define __ASM_ARCH_REALVIEW_H #include <asm/hardware/amba.h> +#include <asm/leds.h> #include <asm/io.h> -#define __io_address(n) __io(IO_ADDRESS(n)) - extern struct sys_timer realview_timer; #define AMBA_DEVICE(name,busid,base,plat) \ diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S new file mode 100644 index 000000000000..4075473cf68a --- /dev/null +++ b/arch/arm/mach-realview/headsmp.S @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-realview/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Realview specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(realview_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c new file mode 100644 index 000000000000..09748cbcd10e --- /dev/null +++ b/arch/arm/mach-realview/hotplug.c @@ -0,0 +1,138 @@ +/* + * linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +extern volatile int pen_release; + +static DECLARE_COMPLETION(cpu_killed); + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + asm volatile( "mcr p15, 0, %1, c7, c14, 0\n" + " mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + /* + * here's the WFI + */ + asm(".word 0xe320f003\n" + : + : + : "memory", "cc"); + + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * The trouble is, letting people know about this is not really + * possible, since we are currently running incoherently, and + * therefore cannot safely call printk() or anything else + */ +#ifdef DEBUG + printk("CPU%u: spurious wakeup call\n", cpu); +#endif + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ +#ifdef DEBUG + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } +#endif + + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); +} + +int mach_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c new file mode 100644 index 000000000000..c9d7c596b200 --- /dev/null +++ b/arch/arm/mach-realview/localtimer.c @@ -0,0 +1,128 @@ +/* + * linux/arch/arm/mach-realview/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> + +#include <asm/mach/time.h> +#include <asm/hardware/arm_twd.h> +#include <asm/hardware/gic.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> + +#define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \ + ((cpu) * REALVIEW_TWD_SIZE)) + +static unsigned long mpcore_timer_rate; + +/* + * local_timer_ack: checks for a local timer interrupt. + * + * If a local timer interrupt has occured, acknowledge and return 1. + * Otherwise, return 0. + */ +int local_timer_ack(void) +{ + void __iomem *base = TWD_BASE(smp_processor_id()); + + if (__raw_readl(base + TWD_TIMER_INTSTAT)) { + __raw_writel(1, base + TWD_TIMER_INTSTAT); + return 1; + } + + return 0; +} + +void __cpuinit local_timer_setup(unsigned int cpu) +{ + void __iomem *base = TWD_BASE(cpu); + unsigned int load, offset; + u64 waitjiffies; + unsigned int count; + + /* + * If this is the first time round, we need to work out how fast + * the timer ticks + */ + if (mpcore_timer_rate == 0) { + printk("Calibrating local timer... "); + + /* Wait for a tick to start */ + waitjiffies = get_jiffies_64() + 1; + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + /* OK, now the tick has started, let's get the timer going */ + waitjiffies += 5; + + /* enable, no interrupt or reload */ + __raw_writel(0x1, base + TWD_TIMER_CONTROL); + + /* maximum value */ + __raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER); + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + count = __raw_readl(base + TWD_TIMER_COUNTER); + + mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); + + printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000, + (mpcore_timer_rate / 100000) % 100); + } + + load = mpcore_timer_rate / HZ; + + __raw_writel(load, base + TWD_TIMER_LOAD); + __raw_writel(0x7, base + TWD_TIMER_CONTROL); + + /* + * Now maneuver our local tick into the right part of the jiffy. + * Start by working out where within the tick our local timer + * interrupt should go. + */ + offset = ((mpcore_timer_rate / HZ) / (NR_CPUS + 1)) * (cpu + 1); + + /* + * gettimeoffset() will return a number of us since the last tick. + * Convert this number of us to a local timer tick count. + * Be careful of integer overflow whilst keeping maximum precision. + * + * with HZ=100 and 1MHz (fpga) ~ 1GHz processor: + * load = 1 ~ 10,000 + * mpcore_timer_rate/10000 = 100 ~ 100,000 + * + * so the multiply value will be less than 10^9 always. + */ + load = (system_timer->offset() * (mpcore_timer_rate / 10000)) / 100; + + /* Add on our offset to get the load value */ + load = (load + offset) % (mpcore_timer_rate / HZ); + + __raw_writel(load, base + TWD_TIMER_COUNTER); + + /* Make sure our local interrupt controller has this enabled */ + __raw_writel(1 << IRQ_LOCALTIMER, + __io_address(REALVIEW_GIC_DIST_BASE) + GIC_DIST_ENABLE_SET); +} + +/* + * take a local timer down + */ +void __cpuexit local_timer_stop(unsigned int cpu) +{ + __raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL); +} diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c new file mode 100644 index 000000000000..a8fbd76d8be5 --- /dev/null +++ b/arch/arm/mach-realview/platsmp.c @@ -0,0 +1,199 @@ +/* + * linux/arch/arm/mach-realview/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/arm_scu.h> +#include <asm/hardware.h> +#include <asm/io.h> + +extern void realview_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +static unsigned int __init get_core_count(void) +{ + unsigned int ncores; + + ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG); + + return (ncores & 0x03) + 1; +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * the primary core may have used a "cross call" soft interrupt + * to get this processor out of WFI in the BootMonitor - make + * sure that we are no longer being sent this soft interrupt + */ + smp_cross_call_done(cpumask_of_cpu(cpu)); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu; + flush_cache_all(); + + /* + * XXX + * + * This is a later addition to the booting protocol: the + * bootMonitor now puts secondary cores into WFI, so + * poke_milo() no longer gets the cores moving; we need + * to send a soft interrupt to wake the secondary core. + * Use smp_cross_call() for this, since there's little + * point duplicating the code here + */ + smp_cross_call(cpumask_of_cpu(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init poke_milo(void) +{ + extern void secondary_startup(void); + + /* nobody is to be released from the pen yet */ + pen_release = -1; + + /* + * write the address of secondary startup into the system-wide + * flags register, then clear the bottom two bits, which is what + * BootMonitor is waiting for + */ +#if 1 +#define REALVIEW_SYS_FLAGSS_OFFSET 0x30 + __raw_writel(virt_to_phys(realview_secondary_startup), + __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_FLAGSS_OFFSET); +#define REALVIEW_SYS_FLAGSC_OFFSET 0x34 + __raw_writel(3, + __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_FLAGSC_OFFSET); +#endif + + mb(); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "Realview: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "Realview: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Enable the local timer for primary CPU + */ + local_timer_setup(cpu); + + /* + * Initialise the possible/present maps. + * cpu_possible_map describes the set of CPUs which may be present + * cpu_present_map describes the set of CPUs populated + */ + for (i = 0; i < max_cpus; i++) { + cpu_set(i, cpu_possible_map); + cpu_set(i, cpu_present_map); + } + + /* + * Do we need any more CPUs? If so, then let them know where + * to start. Note that, on modern versions of MILO, the "poke" + * doesn't actually do anything until each individual core is + * sent a soft interrupt to get it out of WFI + */ + if (max_cpus > 1) + poke_milo(); +} diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 267bb07e39b7..7dc32503fdf2 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -136,6 +136,11 @@ static struct amba_device *amba_devs[] __initdata = { static void __init gic_init_irq(void) { +#ifdef CONFIG_REALVIEW_MPCORE + writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); + writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8); + writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); +#endif gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE)); gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); } diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index c796bcdd6158..0b9d7ca49ec1 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG system resets depends on the value of PCLK. The timeout on an 200MHz s3c2410 should be about 30 seconds. +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on ARCH_S3C2410 + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + + comment "S3C2410 Setup" config S3C2410_DMA diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 8390b685c2b6..0f81fc0c2f7f 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -56,8 +56,16 @@ static struct map_desc anubis_iodesc[] __initdata = { /* ISA IO areas */ - { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, + .type = MT_DEVICE + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, MT_DEVICE + }, /* we could possibly compress the next set down into a set of smaller tables * pagetables, but that would mean using an L2 section, and it still means @@ -66,16 +74,41 @@ static struct map_desc anubis_iodesc[] __initdata = { /* CPLD control registers */ - { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE }, - { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE }, + { + .virtual = (u32)ANUBIS_VA_CTRL1, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_VA_CTRL2, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL2), + .length = SZ_4K, + .type =MT_DEVICE + }, /* IDE drives */ - { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE }, - { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE }, - - { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE }, - { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE }, + { + .virtual = (u32)ANUBIS_IDEPRI, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDEPRIAUX, + .pfn = __phys_to_pfn(S3C2410_CS3+(1<<26)), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDESEC, + .pfn = __phys_to_pfn(S3C2410_CS4), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDESECAUX, + .pfn = __phys_to_pfn(S3C2410_CS4+(1<<26)), + .length = SZ_1M, + .type = MT_DEVICE + }, }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 0b71c896bbd1..4d962717fdf7 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -89,32 +89,63 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc bast_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, /* bast CPLD control registers, and external interrupt controls */ - { (u32)BAST_VA_CTRL1, BAST_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL2, BAST_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL3, BAST_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL4, BAST_PA_CTRL4, SZ_1M, MT_DEVICE }, - + { + .virtual = (u32)BAST_VA_CTRL1, + .pfn = __phys_to_pfn(BAST_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL2, + .pfn = __phys_to_pfn(BAST_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL3, + .pfn = __phys_to_pfn(BAST_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL4, + .pfn = __phys_to_pfn(BAST_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* PC104 IRQ mux */ - { (u32)BAST_VA_PC104_IRQREQ, BAST_PA_PC104_IRQREQ, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQRAW, BAST_PA_PC104_IRQRAW, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)BAST_VA_PC104_IRQREQ, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQRAW, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQMASK, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers @@ -172,7 +203,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = { .name = "pclk", .divisor = 1, .min_baud = 0, - .max_baud = 0. + .max_baud = 0, } }; @@ -185,7 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, [1] = { .hwport = 1, @@ -194,7 +225,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -204,7 +235,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), } }; @@ -237,7 +268,7 @@ static struct mtd_partition bast_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, - .offset = 0 + .offset = 0, }, [1] = { .name = "/boot", @@ -265,28 +296,28 @@ static struct s3c2410_nand_set bast_nand_sets[] = { .nr_chips = 1, .nr_map = smartmedia_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [1] = { .name = "chip0", .nr_chips = 1, .nr_map = chip0_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [2] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [3] = { .name = "chip2", .nr_chips = 1, .nr_map = chip2_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, } }; @@ -324,17 +355,17 @@ static struct resource bast_dm9k_resource[] = { [0] = { .start = S3C2410_CS5 + BAST_PA_DM9000, .end = S3C2410_CS5 + BAST_PA_DM9000 + 3, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, [1] = { .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40, .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, [2] = { .start = IRQ_DM9000, .end = IRQ_DM9000, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, } }; @@ -344,7 +375,7 @@ static struct resource bast_dm9k_resource[] = { */ static struct dm9000_plat_data bast_dm9k_platdata = { - .flags = DM9000_PLATF_16BITONLY + .flags = DM9000_PLATF_16BITONLY, }; static struct platform_device bast_device_dm9k = { @@ -461,7 +492,7 @@ static struct s3c24xx_board bast_board __initdata = { .devices = bast_devices, .devices_count = ARRAY_SIZE(bast_devices), .clocks = bast_clocks, - .clocks_count = ARRAY_SIZE(bast_clocks) + .clocks_count = ARRAY_SIZE(bast_clocks), }; static void __init bast_map_io(void) diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 24d69019a843..f8d86d1e16b6 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -56,8 +56,17 @@ static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ - { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS3, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS3, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, }; diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index d666c621ad06..4e31118533e6 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -58,8 +58,27 @@ static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ - { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS2, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS2, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 46b259673c18..ae7e099bf6c8 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -74,27 +74,47 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc vr1000_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - - /* bast CPLD control registers, and external interrupt controls */ - { (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, + + /* CPLD control registers, and external interrupt controls */ + { + .virtual = (u32)VR1000_VA_CTRL1, + .pfn = __phys_to_pfn(VR1000_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL2, + .pfn = __phys_to_pfn(VR1000_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL3, + .pfn = __phys_to_pfn(VR1000_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL4, + .pfn = __phys_to_pfn(VR1000_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 69f1970646c6..9e02bc3712a0 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -137,7 +137,7 @@ static struct sa1100_port_fns neponset_port_fns __initdata = { .get_mctrl = neponset_get_mctrl, }; -static int neponset_probe(struct device *dev) +static int neponset_probe(struct platform_device *dev) { sa1100_register_uart_fns(&neponset_port_fns); @@ -178,27 +178,27 @@ static int neponset_probe(struct device *dev) /* * LDM power management. */ -static int neponset_suspend(struct device *dev, pm_message_t state) +static int neponset_suspend(struct platform_device *dev, pm_message_t state) { /* * Save state. */ - if (!dev->power.saved_state) - dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); - if (!dev->power.saved_state) + if (!dev->dev.power.saved_state) + dev->dev.power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); + if (!dev->dev.power.saved_state) return -ENOMEM; - *(unsigned int *)dev->power.saved_state = NCR_0; + *(unsigned int *)dev->dev.power.saved_state = NCR_0; return 0; } -static int neponset_resume(struct device *dev) +static int neponset_resume(struct platform_device *dev) { - if (dev->power.saved_state) { - NCR_0 = *(unsigned int *)dev->power.saved_state; - kfree(dev->power.saved_state); - dev->power.saved_state = NULL; + if (dev->dev.power.saved_state) { + NCR_0 = *(unsigned int *)dev->dev.power.saved_state; + kfree(dev->dev.power.saved_state); + dev->dev.power.saved_state = NULL; } return 0; @@ -209,12 +209,13 @@ static int neponset_resume(struct device *dev) #define neponset_resume NULL #endif -static struct device_driver neponset_device_driver = { - .name = "neponset", - .bus = &platform_bus_type, +static struct platform_driver neponset_device_driver = { .probe = neponset_probe, .suspend = neponset_suspend, .resume = neponset_resume, + .driver = { + .name = "neponset", + }, }; static struct resource neponset_resources[] = { @@ -293,7 +294,7 @@ static struct platform_device *devices[] __initdata = { static int __init neponset_init(void) { - driver_register(&neponset_device_driver); + platform_driver_register(&neponset_device_driver); /* * The Neponset is only present on the Assabet machine type. diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 47e0420623fc..e4b435e634e4 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void) tv.tv_sec = sa1100_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &sa1100_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e3c14d6b4328..e84fdde6edf8 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -102,8 +102,8 @@ config CPU_ARM922T # ARM925T config CPU_ARM925T bool "Support ARM925T processor" if ARCH_OMAP1 - depends on ARCH_OMAP1510 - default y if ARCH_OMAP1510 + depends on ARCH_OMAP15XX + default y if ARCH_OMAP15XX select CPU_32v4 select CPU_ABRT_EV4T select CPU_CACHE_V4WT @@ -242,7 +242,7 @@ config CPU_XSCALE # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index fb5b40289de2..9e50127be635 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -354,7 +354,7 @@ void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); - unsigned int user_pgprot; + unsigned int user_pgprot, kern_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -381,7 +381,7 @@ void __init build_mem_type_table(void) } cp = &cache_policies[cachepolicy]; - user_pgprot = cp->pte; + kern_pgprot = user_pgprot = cp->pte; /* * ARMv6 and above have extended page tables. @@ -393,6 +393,7 @@ void __init build_mem_type_table(void) */ mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4; mem_types[MT_ROM].prot_sect &= ~PMD_BIT4; + /* * Mark cache clean areas and XIP ROM read only * from SVC mode and no access from userspace. @@ -412,32 +413,47 @@ void __init build_mem_type_table(void) * (iow, non-global) */ user_pgprot |= L_PTE_ASID; + +#ifdef CONFIG_SMP + /* + * Mark memory with the "shared" attribute for SMP systems + */ + user_pgprot |= L_PTE_SHARED; + kern_pgprot |= L_PTE_SHARED; + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; +#endif } + for (i = 0; i < 16; i++) { + unsigned long v = pgprot_val(protection_map[i]); + v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot; + protection_map[i] = __pgprot(v); + } + + mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot; + mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot; + if (cpu_arch >= CPU_ARCH_ARMv5) { - mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE; - mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE; +#ifndef CONFIG_SMP + /* + * Only use write-through for non-SMP systems + */ + mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; + mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; +#endif } else { - mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte; - mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte; mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); } + pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE | + L_PTE_EXEC | kern_pgprot); + mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; mem_types[MT_ROM].prot_sect |= cp->pmd; - for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); - v = (v & ~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot; - protection_map[i] = __pgprot(v); - } - - pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | - L_PTE_DIRTY | L_PTE_WRITE | - L_PTE_EXEC | cp->pte); - switch (cp->pmd) { case PMD_SECT_WT: mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT; diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 9bb5fff406fb..92f3ca31b7b9 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/hardware/arm_scu.h> #include <asm/procinfo.h> #include <asm/pgtable.h> @@ -112,6 +113,9 @@ ENTRY(cpu_v6_dcache_clean_area) ENTRY(cpu_v6_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id +#ifdef CONFIG_SMP + orr r0, r0, #2 @ set shared pgtable +#endif mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -140,7 +144,7 @@ ENTRY(cpu_v6_switch_mm) ENTRY(cpu_v6_set_pte) str r1, [r0], #-2048 @ linux version - bic r2, r1, #0x000007f0 + bic r2, r1, #0x000003f0 bic r2, r2, #0x00000003 orr r2, r2, #PTE_EXT_AP0 | 2 @@ -191,6 +195,23 @@ cpu_v6_name: * - cache type register is implemented */ __v6_setup: +#ifdef CONFIG_SMP + /* Set up the SCU on core 0 only */ + mrc p15, 0, r0, c0, c0, 5 @ CPU core number + ands r0, r0, #15 + moveq r0, #0x10000000 @ SCU_BASE + orreq r0, r0, #0x00100000 + ldreq r5, [r0, #SCU_CTRL] + orreq r5, r5, #1 + streq r5, [r0, #SCU_CTRL] + +#ifndef CONFIG_CPU_DCACHE_DISABLE + mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode + orr r0, r0, #0x20 + mcr p15, 0, r0, c1, c0, 1 +#endif +#endif + mov r0, #0 mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache @@ -198,6 +219,9 @@ __v6_setup: mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register +#ifdef CONFIG_SMP + orr r4, r4, #2 @ set shared pgtable +#endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #ifdef CONFIG_VFP mrc p15, 0, r0, c1, c0, 2 diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 9677ae8448e8..da4c616b6c49 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -60,7 +60,7 @@ typedef union tagFPREG { #ifdef CONFIG_FPE_NWFPE_XP floatx80 fExtended; #else - int padding[3]; + u32 padding[3]; #endif } FPREG; diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c index b0db5cbcc3b1..32859fa8dcfc 100644 --- a/arch/arm/nwfpe/fpa11_cpdt.c +++ b/arch/arm/nwfpe/fpa11_cpdt.c @@ -59,8 +59,13 @@ static inline void loadExtended(const unsigned int Fn, const unsigned int __user p = (unsigned int *) &fpa11->fpreg[Fn].fExtended; fpa11->fType[Fn] = typeExtended; get_user(p[0], &pMem[0]); /* sign & exponent */ +#ifdef __ARMEB__ + get_user(p[1], &pMem[1]); /* ms bits */ + get_user(p[2], &pMem[2]); /* ls bits */ +#else get_user(p[1], &pMem[2]); /* ls bits */ get_user(p[2], &pMem[1]); /* ms bits */ +#endif } #endif @@ -177,8 +182,13 @@ static inline void storeExtended(const unsigned int Fn, unsigned int __user *pMe } put_user(val.i[0], &pMem[0]); /* sign & exp */ +#ifdef __ARMEB__ + put_user(val.i[1], &pMem[1]); /* msw */ + put_user(val.i[2], &pMem[2]); +#else put_user(val.i[1], &pMem[2]); put_user(val.i[2], &pMem[1]); /* msw */ +#endif } #endif diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c index 4c9f5703148c..67ff2ab08ea0 100644 --- a/arch/arm/nwfpe/fpopcode.c +++ b/arch/arm/nwfpe/fpopcode.c @@ -29,14 +29,14 @@ #ifdef CONFIG_FPE_NWFPE_XP const floatx80 floatx80Constant[] = { - {0x0000, 0x0000000000000000ULL}, /* extended 0.0 */ - {0x3fff, 0x8000000000000000ULL}, /* extended 1.0 */ - {0x4000, 0x8000000000000000ULL}, /* extended 2.0 */ - {0x4000, 0xc000000000000000ULL}, /* extended 3.0 */ - {0x4001, 0x8000000000000000ULL}, /* extended 4.0 */ - {0x4001, 0xa000000000000000ULL}, /* extended 5.0 */ - {0x3ffe, 0x8000000000000000ULL}, /* extended 0.5 */ - {0x4002, 0xa000000000000000ULL} /* extended 10.0 */ + { .high = 0x0000, .low = 0x0000000000000000ULL},/* extended 0.0 */ + { .high = 0x3fff, .low = 0x8000000000000000ULL},/* extended 1.0 */ + { .high = 0x4000, .low = 0x8000000000000000ULL},/* extended 2.0 */ + { .high = 0x4000, .low = 0xc000000000000000ULL},/* extended 3.0 */ + { .high = 0x4001, .low = 0x8000000000000000ULL},/* extended 4.0 */ + { .high = 0x4001, .low = 0xa000000000000000ULL},/* extended 5.0 */ + { .high = 0x3ffe, .low = 0x8000000000000000ULL},/* extended 0.5 */ + { .high = 0x4002, .low = 0xa000000000000000ULL},/* extended 10.0 */ }; #endif diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize index acf409144763..d4a4c8e06635 100644 --- a/arch/arm/nwfpe/softfloat-specialize +++ b/arch/arm/nwfpe/softfloat-specialize @@ -332,6 +332,7 @@ static floatx80 commonNaNToFloatx80( commonNaNT a ) z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 ); z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF; + z.__padding = 0; return z; } diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c index f9f049132a17..0f9656e482ba 100644 --- a/arch/arm/nwfpe/softfloat.c +++ b/arch/arm/nwfpe/softfloat.c @@ -531,6 +531,7 @@ INLINE floatx80 packFloatx80( flag zSign, int32 zExp, bits64 zSig ) z.low = zSig; z.high = ( ( (bits16) zSign )<<15 ) + zExp; + z.__padding = 0; return z; } @@ -2831,6 +2832,7 @@ static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, flo roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } if ( aExp == 0 ) { @@ -2950,6 +2952,7 @@ floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); @@ -3015,6 +3018,7 @@ floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } roundData->exception |= float_flag_divbyzero; @@ -3093,6 +3097,7 @@ floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } normalizeFloatx80Subnormal( bSig, &bExp, &bSig ); @@ -3184,6 +3189,7 @@ floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } if ( aExp == 0 ) { diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 14151700b6b2..978c699673c6 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -51,11 +51,17 @@ input or output the `floatx80' type will be defined. Software IEC/IEEE floating-point types. ------------------------------------------------------------------------------- */ -typedef unsigned long int float32; -typedef unsigned long long float64; +typedef u32 float32; +typedef u64 float64; typedef struct { - unsigned short high; - unsigned long long low; +#ifdef __ARMEB__ + u16 __padding; + u16 high; +#else + u16 high; + u16 __padding; +#endif + u64 low; } floatx80; /* diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 7e144f9cad1c..9ccf1943fc94 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o +obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index a020fe16428f..7ce39b986e23 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -1,15 +1,20 @@ /* * linux/arch/arm/plat-omap/clock.c * - * Copyright (C) 2004 Nokia corporation + * Copyright (C) 2004 - 2005 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * + * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/version.h> +#include <linux/config.h> #include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -18,562 +23,20 @@ #include <asm/io.h> #include <asm/semaphore.h> #include <asm/hardware/clock.h> -#include <asm/arch/board.h> -#include <asm/arch/usb.h> -#include "clock.h" -#include "sram.h" +#include <asm/arch/clock.h> -static LIST_HEAD(clocks); +LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); -static DEFINE_SPINLOCK(clockfw_lock); -static void propagate_rate(struct clk * clk); -/* UART clock function */ -static int set_uart_rate(struct clk * clk, unsigned long rate); -/* External clock (MCLK & BCLK) functions */ -static int set_ext_clk_rate(struct clk * clk, unsigned long rate); -static long round_ext_clk_rate(struct clk * clk, unsigned long rate); -static void init_ext_clk(struct clk * clk); -/* MPU virtual clock functions */ -static int select_table_rate(struct clk * clk, unsigned long rate); -static long round_to_table_rate(struct clk * clk, unsigned long rate); -void clk_setdpll(__u16, __u16); - -static struct mpu_rate rate_table[] = { - /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL - * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv - */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif - { 0, 0, 0, 0, 0 }, -}; - - -static void ckctl_recalc(struct clk * clk); -int __clk_enable(struct clk *clk); -void __clk_disable(struct clk *clk); -void __clk_unuse(struct clk *clk); -int __clk_use(struct clk *clk); - - -static void followparent_recalc(struct clk * clk) -{ - clk->rate = clk->parent->rate; -} - - -static void watchdog_recalc(struct clk * clk) -{ - clk->rate = clk->parent->rate / 14; -} - -static void uart_recalc(struct clk * clk) -{ - unsigned int val = omap_readl(clk->enable_reg); - if (val & clk->enable_bit) - clk->rate = 48000000; - else - clk->rate = 12000000; -} - -static struct clk ck_ref = { - .name = "ck_ref", - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ALWAYS_ENABLED, -}; - -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_PROPAGATES | ALWAYS_ENABLED, -}; - -static struct clk ck_dpll1out = { - .name = "ck_dpll1out", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, -}; - -static struct clk arm_ck = { - .name = "arm_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, - .rate_offset = CKCTL_ARMDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk armper_ck = { - .name = "armper_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, -}; - -static struct clk armxor_ck = { - .name = "armxor_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk armtim_ck = { - .name = "armtim_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, -}; - -static struct clk armwdt_ck = { - .name = "armwdt_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_WDTCK, - .recalc = &watchdog_recalc, -}; - -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .parent = &arm_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, - /* Note: On 16xx the frequency can be divided by 2 by programming - * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 - * - * 1510 version is in TC clocks. - */ -}; - -static struct clk dsp_ck = { - .name = "dsp_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, - .enable_reg = ARM_CKCTL, - .enable_bit = EN_DSPCK, - .rate_offset = CKCTL_DSPDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | ALWAYS_ENABLED, - .rate_offset = CKCTL_DSPMMUDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk dspper_ck = { - .name = "dspper_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &followparent_recalc, - //.recalc = &ckctl_recalc, -}; - -static struct clk dspxor_ck = { - .name = "dspxor_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk dsptim_ck = { - .name = "dsptim_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, -}; - -static struct clk tc_ck = { - .name = "tc_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | - RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, - .rate_offset = CKCTL_TCDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, - .recalc = &followparent_recalc, - /* Note: On 1510 the frequency follows TC_CK - * - * 16xx version is in MPU clocks. - */ -}; - -static struct clk tipb_ck = { - .name = "tibp_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk l3_ocpi_ck = { - .name = "l3_ocpi_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, -}; +DEFINE_SPINLOCK(clockfw_lock); -static struct clk tc1_ck = { - .name = "tc1_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, -}; +static struct clk_functions *arch_clock; -static struct clk tc2_ck = { - .name = "tc2_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, -}; +/*------------------------------------------------------------------------- + * Standard clock functions defined in asm/hardware/clock.h + *-------------------------------------------------------------------------*/ -static struct clk dma_ck = { - .name = "dma_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk api_ck = { - .name = "api_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_APICK, - .recalc = &followparent_recalc, -}; - -static struct clk lb_ck = { - .name = "lb_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, -}; - -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk lcd_ck = { - .name = "lcd_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | - RATE_CKCTL, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk uart1_1510 = { - .name = "uart1_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart1_16xx = { - .name = "uart1_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 29, -}; - -static struct clk uart2_ck = { - .name = "uart2_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT | - ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart3_1510 = { - .name = "uart3_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart3_16xx = { - .name = "uart3_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 31, -}; - -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", - /* Direct from ULPD, no parent */ - .rate = 6000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = ULPD_CLOCK_CTRL, - .enable_bit = USB_MCLK_EN_BIT, -}; - -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = CLOCK_IN_OMAP1510 | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = USB_HOST_HHC_UHOST_EN, -}; - -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OTG_BASE + 0x08 /* OTG_SYSCON_2 */, - .enable_bit = 8 /* UHOST_EN */, -}; - -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, - .enable_reg = SOFT_REQ_REG, - .enable_bit = 4, -}; - -static struct clk mclk_1510 = { - .name = "mclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, -}; - -static struct clk mclk_16xx = { - .name = "mclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = COM_CLK_DIV_CTRL_SEL, - .enable_bit = COM_ULPD_PLL_CLK_REQ, - .set_rate = &set_ext_clk_rate, - .round_rate = &round_ext_clk_rate, - .init = &init_ext_clk, -}; - -static struct clk bclk_1510 = { - .name = "bclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, -}; - -static struct clk bclk_16xx = { - .name = "bclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = SWD_CLK_DIV_CTRL_SEL, - .enable_bit = SWD_ULPD_PLL_CLK_REQ, - .set_rate = &set_ext_clk_rate, - .round_rate = &round_ext_clk_rate, - .init = &init_ext_clk, -}; - -static struct clk mmc1_ck = { - .name = "mmc1_ck", - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck, - .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 23, -}; - -static struct clk mmc2_ck = { - .name = "mmc2_ck", - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck, - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 20, -}; - -static struct clk virtual_ck_mpu = { - .name = "mpu", - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_CLOCK | ALWAYS_ENABLED, - .parent = &arm_ck, /* Is smarter alias for */ - .recalc = &followparent_recalc, - .set_rate = &select_table_rate, - .round_rate = &round_to_table_rate, -}; - - -static struct clk * onchip_clks[] = { - /* non-ULPD clocks */ - &ck_ref, - &ck_dpll1, - /* CK_GEN1 clocks */ - &ck_dpll1out, - &arm_ck, - &armper_ck, - &arm_gpio_ck, - &armxor_ck, - &armtim_ck, - &armwdt_ck, - &arminth_ck1510, &arminth_ck16xx, - /* CK_GEN2 clocks */ - &dsp_ck, - &dspmmu_ck, - &dspper_ck, - &dspxor_ck, - &dsptim_ck, - /* CK_GEN3 clocks */ - &tc_ck, - &tipb_ck, - &l3_ocpi_ck, - &tc1_ck, - &tc2_ck, - &dma_ck, - &dma_lcdfree_ck, - &api_ck, - &lb_ck, - &rhea1_ck, - &rhea2_ck, - &lcd_ck, - /* ULPD clocks */ - &uart1_1510, - &uart1_16xx, - &uart2_ck, - &uart3_1510, - &uart3_16xx, - &usb_clko, - &usb_hhc_ck1510, &usb_hhc_ck16xx, - &usb_dc_ck, - &mclk_1510, &mclk_16xx, - &bclk_1510, &bclk_16xx, - &mmc1_ck, - &mmc2_ck, - /* Virtual clocks */ - &virtual_ck_mpu, -}; - -struct clk *clk_get(struct device *dev, const char *id) +struct clk * clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); @@ -590,534 +53,200 @@ struct clk *clk_get(struct device *dev, const char *id) } EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - - -int __clk_enable(struct clk *clk) -{ - __u16 regval16; - __u32 regval32; - - if (clk->flags & ALWAYS_ENABLED) - return 0; - - if (unlikely(clk->enable_reg == 0)) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); - return 0; - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_use(&api_ck); - } - - if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } - } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_unuse(&api_ck); - } - - return 0; -} - - -void __clk_disable(struct clk *clk) -{ - __u16 regval16; - __u32 regval32; - - if (clk->enable_reg == 0) - return; - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_use(&api_ck); - } - - if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } - } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_unuse(&api_ck); - } -} - - -void __clk_unuse(struct clk *clk) -{ - if (clk->usecount > 0 && !(--clk->usecount)) { - __clk_disable(clk); - if (likely(clk->parent)) - __clk_unuse(clk->parent); - } -} - - -int __clk_use(struct clk *clk) -{ - int ret = 0; - if (clk->usecount++ == 0) { - if (likely(clk->parent)) - ret = __clk_use(clk->parent); - - if (unlikely(ret != 0)) { - clk->usecount--; - return ret; - } - - ret = __clk_enable(clk); - - if (unlikely(ret != 0) && clk->parent) { - __clk_unuse(clk->parent); - clk->usecount--; - } - } - - return ret; -} - - int clk_enable(struct clk *clk) { unsigned long flags; - int ret; + int ret = 0; spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); + if (clk->enable) + ret = clk->enable(clk); + else if (arch_clock->clk_enable) + ret = arch_clock->clk_enable(clk); + else + printk(KERN_ERR "Could not enable clock %s\n", clk->name); spin_unlock_irqrestore(&clockfw_lock, flags); + return ret; } EXPORT_SYMBOL(clk_enable); - void clk_disable(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); + if (clk->disable) + clk->disable(clk); + else if (arch_clock->clk_disable) + arch_clock->clk_disable(clk); + else + printk(KERN_ERR "Could not disable clock %s\n", clk->name); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); - int clk_use(struct clk *clk) { unsigned long flags; int ret = 0; spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_use(clk); + if (arch_clock->clk_use) + ret = arch_clock->clk_use(clk); spin_unlock_irqrestore(&clockfw_lock, flags); + return ret; } EXPORT_SYMBOL(clk_use); - void clk_unuse(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clockfw_lock, flags); - __clk_unuse(clk); + if (arch_clock->clk_unuse) + arch_clock->clk_unuse(clk); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_unuse); - int clk_get_usecount(struct clk *clk) { - return clk->usecount; -} -EXPORT_SYMBOL(clk_get_usecount); - - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - - -static __u16 verify_ckctl_value(__u16 newval) -{ - /* This function checks for following limitations set - * by the hardware (all conditions must be true): - * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 - * ARM_CK >= TC_CK - * DSP_CK >= TC_CK - * DSPMMU_CK >= TC_CK - * - * In addition following rules are enforced: - * LCD_CK <= TC_CK - * ARMPER_CK <= TC_CK - * - * However, maximum frequencies are not checked for! - */ - __u8 per_exp; - __u8 lcd_exp; - __u8 arm_exp; - __u8 dsp_exp; - __u8 tc_exp; - __u8 dspmmu_exp; - - per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; - lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; - arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; - dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; - tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; - dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; - - if (dspmmu_exp < dsp_exp) - dspmmu_exp = dsp_exp; - if (dspmmu_exp > dsp_exp+1) - dspmmu_exp = dsp_exp+1; - if (tc_exp < arm_exp) - tc_exp = arm_exp; - if (tc_exp < dspmmu_exp) - tc_exp = dspmmu_exp; - if (tc_exp > lcd_exp) - lcd_exp = tc_exp; - if (tc_exp > per_exp) - per_exp = tc_exp; + unsigned long flags; + int ret = 0; - newval &= 0xf000; - newval |= per_exp << CKCTL_PERDIV_OFFSET; - newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; - newval |= arm_exp << CKCTL_ARMDIV_OFFSET; - newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; - newval |= tc_exp << CKCTL_TCDIV_OFFSET; - newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->usecount; + spin_unlock_irqrestore(&clockfw_lock, flags); - return newval; + return ret; } +EXPORT_SYMBOL(clk_get_usecount); - -static int calc_dsor_exp(struct clk *clk, unsigned long rate) +unsigned long clk_get_rate(struct clk *clk) { - /* Note: If target frequency is too low, this function will return 4, - * which is invalid value. Caller must check for this value and act - * accordingly. - * - * Note: This function does not check for following limitations set - * by the hardware (all conditions must be true): - * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 - * ARM_CK >= TC_CK - * DSP_CK >= TC_CK - * DSPMMU_CK >= TC_CK - */ - unsigned long realrate; - struct clk * parent; - unsigned dsor_exp; - - if (unlikely(!(clk->flags & RATE_CKCTL))) - return -EINVAL; - - parent = clk->parent; - if (unlikely(parent == 0)) - return -EIO; - - realrate = parent->rate; - for (dsor_exp=0; dsor_exp<4; dsor_exp++) { - if (realrate <= rate) - break; + unsigned long flags; + unsigned long ret = 0; - realrate /= 2; - } + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); - return dsor_exp; + return ret; } +EXPORT_SYMBOL(clk_get_rate); - -static void ckctl_recalc(struct clk * clk) +void clk_put(struct clk *clk) { - int dsor; - - /* Calculate divisor encoded as 2-bit exponent */ - if (clk->flags & DSP_DOMAIN_CLOCK) { - /* The clock control bits are in DSP domain, - * so api_ck is needed for access. - * Note that DSP_CKCTL virt addr = phys addr, so - * we must use __raw_readw() instead of omap_readw(). - */ - __clk_use(&api_ck); - dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - __clk_unuse(&api_ck); - } else { - dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); - } - if (unlikely(clk->rate == clk->parent->rate / dsor)) - return; /* No change, quick exit */ - clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + if (clk && !IS_ERR(clk)) + module_put(clk->owner); } +EXPORT_SYMBOL(clk_put); +/*------------------------------------------------------------------------- + * Optional clock functions defined in asm/hardware/clock.h + *-------------------------------------------------------------------------*/ long clk_round_rate(struct clk *clk, unsigned long rate) { - int dsor_exp; - - if (clk->flags & RATE_FIXED) - return clk->rate; - - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp < 0) - return dsor_exp; - if (dsor_exp > 3) - dsor_exp = 3; - return clk->parent->rate / (1 << dsor_exp); - } + unsigned long flags; + long ret = 0; - if(clk->round_rate != 0) - return clk->round_rate(clk, rate); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_round_rate) + ret = arch_clock->clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); - return clk->rate; + return ret; } EXPORT_SYMBOL(clk_round_rate); - -static void propagate_rate(struct clk * clk) -{ - struct clk ** clkp; - - for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { - if (likely((*clkp)->parent != clk)) continue; - if (likely((*clkp)->recalc)) - (*clkp)->recalc(*clkp); - } -} - - -static int select_table_rate(struct clk * clk, unsigned long rate) +int clk_set_rate(struct clk *clk, unsigned long rate) { - /* Find the highest supported frequency <= rate and switch to it */ - struct mpu_rate * ptr; - - if (clk != &virtual_ck_mpu) - return -EINVAL; - - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) - continue; - - /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) - continue; - - /* Can check only after xtal frequency check */ - if (ptr->rate <= rate) - break; - } - - if (!ptr->rate) - return -EINVAL; + unsigned long flags; + int ret = 0; - /* - * In most cases we should not need to reprogram DPLL. - * Reprogramming the DPLL is tricky, it must be done from SRAM. - */ - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_set_rate) + ret = arch_clock->clk_set_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); - ck_dpll1.rate = ptr->pll_rate; - propagate_rate(&ck_dpll1); - return 0; + return ret; } +EXPORT_SYMBOL(clk_set_rate); - -static long round_to_table_rate(struct clk * clk, unsigned long rate) +int clk_set_parent(struct clk *clk, struct clk *parent) { - /* Find the highest supported frequency <= rate */ - struct mpu_rate * ptr; - long highest_rate; - - if (clk != &virtual_ck_mpu) - return -EINVAL; - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) - continue; - - highest_rate = ptr->rate; + unsigned long flags; + int ret = 0; - /* Can check only after xtal frequency check */ - if (ptr->rate <= rate) - break; - } + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_set_parent) + ret = arch_clock->clk_set_parent(clk, parent); + spin_unlock_irqrestore(&clockfw_lock, flags); - return highest_rate; + return ret; } +EXPORT_SYMBOL(clk_set_parent); - -int clk_set_rate(struct clk *clk, unsigned long rate) +struct clk *clk_get_parent(struct clk *clk) { - int ret = -EINVAL; - int dsor_exp; - __u16 regval; - unsigned long flags; - - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp > 3) - dsor_exp = -EINVAL; - if (dsor_exp < 0) - return dsor_exp; - - spin_lock_irqsave(&clockfw_lock, flags); - regval = omap_readw(ARM_CKCTL); - regval &= ~(3 << clk->rate_offset); - regval |= dsor_exp << clk->rate_offset; - regval = verify_ckctl_value(regval); - omap_writew(regval, ARM_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); - spin_unlock_irqrestore(&clockfw_lock, flags); - ret = 0; - } else if(clk->set_rate != 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->set_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + unsigned long flags; + struct clk * ret = NULL; - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_get_parent) + ret = arch_clock->clk_get_parent(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); return ret; } -EXPORT_SYMBOL(clk_set_rate); +EXPORT_SYMBOL(clk_get_parent); +/*------------------------------------------------------------------------- + * OMAP specific clock functions shared between omap1 and omap2 + *-------------------------------------------------------------------------*/ -static unsigned calc_ext_dsor(unsigned long rate) -{ - unsigned dsor; +unsigned int __initdata mpurate; - /* MCLK and BCLK divisor selection is not linear: - * freq = 96MHz / dsor - * - * RATIO_SEL range: dsor <-> RATIO_SEL - * 0..6: (RATIO_SEL+2) <-> (dsor-2) - * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) - * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 - * can not be used. - */ - for (dsor = 2; dsor < 96; ++dsor) { - if ((dsor & 1) && dsor > 8) - continue; - if (rate >= 96000000 / dsor) - break; - } - return dsor; -} - -/* Only needed on 1510 */ -static int set_uart_rate(struct clk * clk, unsigned long rate) -{ - unsigned int val; - - val = omap_readl(clk->enable_reg); - if (rate == 12000000) - val &= ~(1 << clk->enable_bit); - else if (rate == 48000000) - val |= (1 << clk->enable_bit); - else - return -EINVAL; - omap_writel(val, clk->enable_reg); - clk->rate = rate; - - return 0; -} - -static int set_ext_clk_rate(struct clk * clk, unsigned long rate) +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) { - unsigned dsor; - __u16 ratio_bits; + get_option(&str, &mpurate); - dsor = calc_ext_dsor(rate); - clk->rate = 96000000 / dsor; - if (dsor > 8) - ratio_bits = ((dsor - 8) / 2 + 6) << 2; - else - ratio_bits = (dsor - 2) << 2; + if (!mpurate) + return 1; - ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd; - omap_writew(ratio_bits, clk->enable_reg); + if (mpurate < 1000) + mpurate *= 1000000; - return 0; + return 1; } +__setup("mpurate=", omap_clk_setup); - -static long round_ext_clk_rate(struct clk * clk, unsigned long rate) +/* Used for clocks that always have same value as the parent clock */ +void followparent_recalc(struct clk *clk) { - return 96000000 / calc_ext_dsor(rate); + clk->rate = clk->parent->rate; } - -static void init_ext_clk(struct clk * clk) +/* Propagate rate to children */ +void propagate_rate(struct clk * tclk) { - unsigned dsor; - __u16 ratio_bits; + struct clk *clkp; - /* Determine current rate and ensure clock is based on 96MHz APLL */ - ratio_bits = omap_readw(clk->enable_reg) & ~1; - omap_writew(ratio_bits, clk->enable_reg); - - ratio_bits = (ratio_bits & 0xfc) >> 2; - if (ratio_bits > 6) - dsor = (ratio_bits - 6) * 2 + 8; - else - dsor = ratio_bits + 2; - - clk-> rate = 96000000 / dsor; + list_for_each_entry(clkp, &clocks, node) { + if (likely(clkp->parent != tclk)) + continue; + if (likely((u32)clkp->recalc)) + clkp->recalc(clkp); + } } - int clk_register(struct clk *clk) { down(&clocks_sem); @@ -1125,6 +254,7 @@ int clk_register(struct clk *clk) if (clk->init) clk->init(clk); up(&clocks_sem); + return 0; } EXPORT_SYMBOL(clk_register); @@ -1137,203 +267,38 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. See also omap_late_clk_reset(). - */ -static inline void omap_early_clk_reset(void) +void clk_deny_idle(struct clk *clk) { - //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_deny_idle) + arch_clock->clk_deny_idle(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } -#else -#define omap_early_clk_reset() {} -#endif +EXPORT_SYMBOL(clk_deny_idle); -int __init clk_init(void) +void clk_allow_idle(struct clk *clk) { - struct clk ** clkp; - const struct omap_clock_config *info; - int crystal_type = 0; /* Default 12 MHz */ - - omap_early_clk_reset(); - - for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { - if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) { - clk_register(*clkp); - continue; - } - } - - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap1510()) - crystal_type = info->system_clock_type; - } - -#if defined(CONFIG_ARCH_OMAP730) - ck_ref.rate = 13000000; -#elif defined(CONFIG_ARCH_OMAP16XX) - if (crystal_type == 2) - ck_ref.rate = 19200000; -#endif - - printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", - omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), - omap_readw(ARM_CKCTL)); - - /* We want to be in syncronous scalable mode */ - omap_writew(0x1000, ARM_SYSST); - -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. - */ - { - unsigned pll_ctl_val = omap_readw(DPLL_CTL); - - ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ - if (pll_ctl_val & 0x10) { - /* PLL enabled, apply multiplier and divisor */ - if (pll_ctl_val & 0xf80) - ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; - ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; - } else { - /* PLL disabled, apply bypass divisor */ - switch (pll_ctl_val & 0xc) { - case 0: - break; - case 0x4: - ck_dpll1.rate /= 2; - break; - default: - ck_dpll1.rate /= 4; - break; - } - } - } - propagate_rate(&ck_dpll1); -#else - /* Find the highest supported frequency and enable it */ - if (select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - propagate_rate(&ck_dpll1); - } -#endif - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); -#endif - - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); - - /* Put DSP/MPUI into reset until needed */ - omap_writew(0, ARM_RSTCT1); - omap_writew(1, ARM_RSTCT2); - omap_writew(0x400, ARM_IDLECT1); - - /* - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) - * of the ARM_IDLECT2 register must be set to zero. The power-on - * default value of this bit is one. - */ - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_use(&armper_ck); - clk_use(&armxor_ck); - clk_use(&armtim_ck); - - if (cpu_is_omap1510()) - clk_enable(&arm_gpio_ck); + unsigned long flags; - return 0; + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_allow_idle) + arch_clock->clk_allow_idle(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } +EXPORT_SYMBOL(clk_allow_idle); +/*-------------------------------------------------------------------------*/ -#ifdef CONFIG_OMAP_RESET_CLOCKS - -static int __init omap_late_clk_reset(void) +int __init clk_init(struct clk_functions * custom_clocks) { - /* Turn off all unused clocks */ - struct clk *p; - __u32 regval32; - - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(regval32, SOFT_REQ_REG); - omap_writew(0, SOFT_REQ_REG2); - - list_for_each_entry(p, &clocks, node) { - if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || - p->enable_reg == 0) - continue; - - /* Assume no DSP clocks have been activated by bootloader */ - if (p->flags & DSP_DOMAIN_CLOCK) - continue; - - /* Is the clock already disabled? */ - if (p->flags & ENABLE_REG_32BIT) { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(p->enable_reg); - else - regval32 = omap_readl(p->enable_reg); - } else { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(p->enable_reg); - else - regval32 = omap_readw(p->enable_reg); - } - - if ((regval32 & (1 << p->enable_bit)) == 0) - continue; - - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || p == &ck_dpll1out // FIX: SoSSI, SSR - || p == &arm_gpio_ck // FIX: GPIO code for 1510 - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - p->name); - continue; - } - - printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); - __clk_disable(p); - printk(" done\n"); + if (!custom_clocks) { + printk(KERN_ERR "No custom clock functions registered\n"); + BUG(); } + arch_clock = custom_clocks; + return 0; } - -late_initcall(omap_late_clk_reset); - -#endif diff --git a/arch/arm/plat-omap/clock.h b/arch/arm/plat-omap/clock.h deleted file mode 100644 index a89e1e8c2519..000000000000 --- a/arch/arm/plat-omap/clock.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * linux/arch/arm/plat-omap/clock.h - * - * Copyright (C) 2004 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -struct module; - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - struct clk *parent; - unsigned long rate; - __s8 usecount; - __u16 flags; - __u32 enable_reg; - __u8 enable_bit; - __u8 rate_offset; - void (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); -}; - - -struct mpu_rate { - unsigned long rate; - unsigned long xtal; - unsigned long pll_rate; - __u16 ckctl_val; - __u16 dpllctl_val; -}; - - -/* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 -#define CLOCK_IN_OMAP16XX 64 -#define CLOCK_IN_OMAP1510 128 -#define CLOCK_IN_OMAP730 256 -#define DSP_DOMAIN_CLOCK 512 -#define VIRTUAL_IO_ADDRESS 1024 - -/* ARM_CKCTL bit shifts */ -#define CKCTL_PERDIV_OFFSET 0 -#define CKCTL_LCDDIV_OFFSET 2 -#define CKCTL_ARMDIV_OFFSET 4 -#define CKCTL_DSPDIV_OFFSET 6 -#define CKCTL_TCDIV_OFFSET 8 -#define CKCTL_DSPMMUDIV_OFFSET 10 -/*#define ARM_TIMXO 12*/ -#define EN_DSPCK 13 -/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ -/* DSP_CKCTL bit shifts */ -#define CKCTL_DSPPERDIV_OFFSET 0 - -/* ARM_IDLECT1 bit shifts */ -/*#define IDLWDT_ARM 0*/ -/*#define IDLXORP_ARM 1*/ -/*#define IDLPER_ARM 2*/ -/*#define IDLLCD_ARM 3*/ -/*#define IDLLB_ARM 4*/ -/*#define IDLHSAB_ARM 5*/ -/*#define IDLIF_ARM 6*/ -/*#define IDLDPLL_ARM 7*/ -/*#define IDLAPI_ARM 8*/ -/*#define IDLTIM_ARM 9*/ -/*#define SETARM_IDLE 11*/ - -/* ARM_IDLECT2 bit shifts */ -#define EN_WDTCK 0 -#define EN_XORPCK 1 -#define EN_PERCK 2 -#define EN_LCDCK 3 -#define EN_LBCK 4 /* Not on 1610/1710 */ -/*#define EN_HSABCK 5*/ -#define EN_APICK 6 -#define EN_TIMCK 7 -#define DMACK_REQ 8 -#define EN_GPIOCK 9 /* Not on 1610/1710 */ -/*#define EN_LBFREECK 10*/ -#define EN_CKOUT_ARM 11 - -/* ARM_IDLECT3 bit shifts */ -#define EN_OCPI_CK 0 -#define EN_TC1_CK 2 -#define EN_TC2_CK 4 - -/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ -#define EN_DSPTIMCK 5 - -/* Various register defines for clock controls scattered around OMAP chip */ -#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ -#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ -#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ -#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ -#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 -#define COM_CLK_DIV_CTRL_SEL 0xfffe0878 -#define SOFT_REQ_REG 0xfffe0834 -#define SOFT_REQ_REG2 0xfffe0880 - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); -int clk_init(void); - -#endif diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 02bcc6c1cd1b..ccdb452630cf 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -31,7 +31,7 @@ #include <asm/arch/mux.h> #include <asm/arch/fpga.h> -#include "clock.h" +#include <asm/arch/clock.h> #define NO_LENGTH_CHECK 0xffffffff @@ -117,19 +117,43 @@ EXPORT_SYMBOL(omap_get_var_config); static int __init omap_add_serial_console(void) { - const struct omap_serial_console_config *info; - - info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE, - struct omap_serial_console_config); - if (info != NULL && info->console_uart) { - static char speed[11], *opt = NULL; + const struct omap_serial_console_config *con_info; + const struct omap_uart_config *uart_info; + static char speed[11], *opt = NULL; + int line, i, uart_idx; + + uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE, + struct omap_serial_console_config); + if (uart_info == NULL || con_info == NULL) + return 0; + + if (con_info->console_uart == 0) + return 0; + + if (con_info->console_speed) { + snprintf(speed, sizeof(speed), "%u", con_info->console_speed); + opt = speed; + } - if (info->console_speed) { - snprintf(speed, sizeof(speed), "%u", info->console_speed); - opt = speed; - } - return add_preferred_console("ttyS", info->console_uart - 1, opt); + uart_idx = con_info->console_uart - 1; + if (uart_idx >= OMAP_MAX_NR_PORTS) { + printk(KERN_INFO "Console: external UART#%d. " + "Not adding it as console this time.\n", + uart_idx + 1); + return 0; + } + if (!(uart_info->enabled_uarts & (1 << uart_idx))) { + printk(KERN_ERR "Console: Selected UART#%d is " + "not enabled for this platform\n", + uart_idx + 1); + return -1; + } + line = 0; + for (i = 0; i < uart_idx; i++) { + if (uart_info->enabled_uarts & (1 << i)) + line++; } - return 0; + return add_preferred_console("ttyS", line, opt); } console_initcall(omap_add_serial_console); diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c new file mode 100644 index 000000000000..9dcce904b608 --- /dev/null +++ b/arch/arm/plat-omap/devices.c @@ -0,0 +1,381 @@ +/* + * linux/arch/arm/plat-omap/devices.c + * + * Common platform device setup/initialization for OMAP1 and OMAP2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/arch/tc.h> +#include <asm/arch/board.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> + + +void omap_nop_release(struct device *dev) +{ + /* Nothing */ +} + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP2_I2C_BASE1 0x48070000 +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_INT INT_I2C +#define OMAP2_I2C_INT1 56 + +static struct resource i2c_resources1[] = { + { + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM, + }, + { + .start = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +/* DMA not used; works around erratum writing to non-empty i2c fifo */ + +static struct platform_device omap_i2c_device1 = { + .name = "i2c_omap", + .id = 1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources1), + .resource = i2c_resources1, +}; + +/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */ +static void omap_init_i2c(void) +{ + if (cpu_is_omap24xx()) { + i2c_resources1[0].start = OMAP2_I2C_BASE1; + i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE; + i2c_resources1[1].start = OMAP2_I2C_INT1; + } else { + i2c_resources1[0].start = OMAP1_I2C_BASE; + i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE; + i2c_resources1[1].start = OMAP1_I2C_INT; + } + + /* FIXME define and use a boot tag, in case of boards that + * either don't wire up I2C, or chips that mux it differently... + * it can include clocking and address info, maybe more. + */ + if (cpu_is_omap24xx()) { + omap_cfg_reg(M19_24XX_I2C1_SCL); + omap_cfg_reg(L15_24XX_I2C1_SDA); + } else { + omap_cfg_reg(I2C_SCL); + omap_cfg_reg(I2C_SDA); + } + + (void) platform_device_register(&omap_i2c_device1); +} + +#else +static inline void omap_init_i2c(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_MMC1_BASE 0x4809c000 +#define OMAP_MMC1_INT 83 +#else +#define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC1_INT INT_MMC +#endif +#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +static struct omap_mmc_conf mmc1_conf; + +static u64 mmc1_dmamask = 0xffffffff; + +static struct resource mmc1_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC1_BASE), + .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP_MMC1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device1 = { + .name = "mmci-omap", + .id = 1, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc1_dmamask, + .platform_data = &mmc1_conf, + }, + .num_resources = ARRAY_SIZE(mmc1_resources), + .resource = mmc1_resources, +}; + +#ifdef CONFIG_ARCH_OMAP16XX + +static struct omap_mmc_conf mmc2_conf; + +static u64 mmc2_dmamask = 0xffffffff; + +static struct resource mmc2_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC2_BASE), + .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_MMC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device2 = { + .name = "mmci-omap", + .id = 2, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc2_dmamask, + .platform_data = &mmc2_conf, + }, + .num_resources = ARRAY_SIZE(mmc2_resources), + .resource = mmc2_resources, +}; +#endif + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + const struct omap_mmc_conf *mmc; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + /* block 1 is always available and has just one pinout option */ + mmc = &mmc_conf->mmc[0]; + if (mmc->enabled) { + if (!cpu_is_omap24xx()) { + omap_cfg_reg(MMC_CMD); + omap_cfg_reg(MMC_CLK); + omap_cfg_reg(MMC_DAT0); + if (cpu_is_omap1710()) { + omap_cfg_reg(M15_1710_MMC_CLKI); + omap_cfg_reg(P19_1710_MMC_CMDDIR); + omap_cfg_reg(P20_1710_MMC_DATDIR0); + } + } + if (mmc->wire4) { + if (!cpu_is_omap24xx()) { + omap_cfg_reg(MMC_DAT1); + /* NOTE: DAT2 can be on W10 (here) or M15 */ + if (!mmc->nomux) + omap_cfg_reg(MMC_DAT2); + omap_cfg_reg(MMC_DAT3); + } + } + mmc1_conf = *mmc; + (void) platform_device_register(&mmc_omap_device1); + } + +#ifdef CONFIG_ARCH_OMAP16XX + /* block 2 is on newer chips, and has many pinout options */ + mmc = &mmc_conf->mmc[1]; + if (mmc->enabled) { + if (!mmc->nomux) { + omap_cfg_reg(Y8_1610_MMC2_CMD); + omap_cfg_reg(Y10_1610_MMC2_CLK); + omap_cfg_reg(R18_1610_MMC2_CLKIN); + omap_cfg_reg(W8_1610_MMC2_DAT0); + if (mmc->wire4) { + omap_cfg_reg(V8_1610_MMC2_DAT1); + omap_cfg_reg(W15_1610_MMC2_DAT2); + omap_cfg_reg(R10_1610_MMC2_DAT3); + } + + /* These are needed for the level shifter */ + omap_cfg_reg(V9_1610_MMC2_CMDDIR); + omap_cfg_reg(V5_1610_MMC2_DATDIR0); + omap_cfg_reg(W19_1610_MMC2_DATDIR1); + } + + /* Feedback clock must be set on OMAP-1710 MMC2 */ + if (cpu_is_omap1710()) + omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), + MOD_CONF_CTRL_1); + mmc2_conf = *mmc; + (void) platform_device_register(&mmc_omap_device2); + } +#endif + return; +} +#else +static inline void omap_init_mmc(void) {} +#endif + +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_WDT_BASE 0x48022000 +#else +#define OMAP_WDT_BASE 0xfffeb000 +#endif + +static struct resource wdt_resources[] = { + { + .start = OMAP_WDT_BASE, + .end = OMAP_WDT_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap_wdt", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void omap_init_wdt(void) +{ + (void) platform_device_register(&omap_wdt_device); +} +#else +static inline void omap_init_wdt(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP_RNG) || defined(CONFIG_OMAP_RNG_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + +static struct omap_lcd_config omap_fb_conf; + +static u64 omap_fb_dma_mask = ~(u32)0; + +static struct platform_device omap_fb_device = { + .name = "omapfb", + .id = -1, + .dev = { + .release = omap_nop_release, + .dma_mask = &omap_fb_dma_mask, + .coherent_dma_mask = ~(u32)0, + .platform_data = &omap_fb_conf, + }, + .num_resources = 0, +}; + +static inline void omap_init_fb(void) +{ + const struct omap_lcd_config *conf; + + conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); + if (conf != NULL) + omap_fb_conf = *conf; + platform_device_register(&omap_fb_device); +} + +#else + +static inline void omap_init_fb(void) {} + +#endif + +/* + * This gets called after board-specific INIT_MACHINE, and initializes most + * on-chip peripherals accessible on this board (except for few like USB): + * + * (a) Does any "standard config" pin muxing needed. Board-specific + * code will have muxed GPIO pins and done "nonstandard" setup; + * that code could live in the boot loader. + * (b) Populating board-specific platform_data with the data drivers + * rely on to handle wiring variations. + * (c) Creating platform devices as meaningful on this board and + * with this kernel configuration. + * + * Claiming GPIOs, and setting their direction and initial values, is the + * responsibility of the device drivers. So is responding to probe(). + * + * Board-specific knowlege like creating devices or pin setup is to be + * kept out of drivers as much as possible. In particular, pin setup + * may be handled by the boot loader, and drivers should expect it will + * normally have been done by the time they're probed. + */ +static int __init omap_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_fb(); + omap_init_i2c(); + omap_init_mmc(); + omap_init_wdt(); + omap_init_rng(); + + return 0; +} +arch_initcall(omap_init_devices); + diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index da7b65145658..f5cc21ad0956 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -6,6 +6,8 @@ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> * Graphics DMA and LCD DMA graphics tranformations * by Imre Deak <imre.deak@nokia.com> + * OMAP2 support Copyright (C) 2004-2005 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. * * Support functions for the OMAP internal DMA channels. @@ -31,8 +33,15 @@ #include <asm/arch/tc.h> -#define OMAP_DMA_ACTIVE 0x01 +#define DEBUG_PRINTS +#undef DEBUG_PRINTS +#ifdef DEBUG_PRINTS +#define debug_printk(x) printk x +#else +#define debug_printk(x) +#endif +#define OMAP_DMA_ACTIVE 0x01 #define OMAP_DMA_CCR_EN (1 << 7) #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -55,7 +64,7 @@ static int dma_chan_count; static spinlock_t dma_chan_lock; static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT]; -const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { +const static u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3, INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7, INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10, @@ -63,6 +72,20 @@ const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD }; +#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ + __FUNCTION__); + +#ifdef CONFIG_ARCH_OMAP15XX +/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ +int omap_dma_in_1510_mode(void) +{ + return enable_1510_mode; +} +#else +#define omap_dma_in_1510_mode() 0 +#endif + +#ifdef CONFIG_ARCH_OMAP1 static inline int get_gdma_dev(int req) { u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; @@ -82,6 +105,9 @@ static inline void set_gdma_dev(int req, int dev) l |= (dev - 1) << shift; omap_writel(l, reg); } +#else +#define set_gdma_dev(req, dev) do {} while (0) +#endif static void clear_lch_regs(int lch) { @@ -121,38 +147,62 @@ void omap_set_dma_priority(int dst_port, int priority) } void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, - int frame_count, int sync_mode) + int frame_count, int sync_mode, + int dma_trigger, int src_or_dst_synch) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~0x03; + OMAP_DMA_CSDP_REG(lch) |= data_type; - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~0x03; - w |= data_type; - omap_writew(w, OMAP_DMA_CSDP(lch)); + if (cpu_class_is_omap1()) { + OMAP_DMA_CCR_REG(lch) &= ~(1 << 5); + if (sync_mode == OMAP_DMA_SYNC_FRAME) + OMAP_DMA_CCR_REG(lch) |= 1 << 5; + + OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2); + if (sync_mode == OMAP_DMA_SYNC_BLOCK) + OMAP1_DMA_CCR2_REG(lch) |= 1 << 2; + } + + if (cpu_is_omap24xx() && dma_trigger) { + u32 val = OMAP_DMA_CCR_REG(lch); + + if (dma_trigger > 63) + val |= 1 << 20; + if (dma_trigger > 31) + val |= 1 << 19; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(1 << 5); - if (sync_mode == OMAP_DMA_SYNC_FRAME) - w |= 1 << 5; - omap_writew(w, OMAP_DMA_CCR(lch)); + val |= (dma_trigger & 0x1f); - w = omap_readw(OMAP_DMA_CCR2(lch)); - w &= ~(1 << 2); - if (sync_mode == OMAP_DMA_SYNC_BLOCK) - w |= 1 << 2; - omap_writew(w, OMAP_DMA_CCR2(lch)); + if (sync_mode & OMAP_DMA_SYNC_FRAME) + val |= 1 << 5; - omap_writew(elem_count, OMAP_DMA_CEN(lch)); - omap_writew(frame_count, OMAP_DMA_CFN(lch)); + if (sync_mode & OMAP_DMA_SYNC_BLOCK) + val |= 1 << 18; + if (src_or_dst_synch) + val |= 1 << 24; /* source synch */ + else + val &= ~(1 << 24); /* dest synch */ + + OMAP_DMA_CCR_REG(lch) = val; + } + + OMAP_DMA_CEN_REG(lch) = elem_count; + OMAP_DMA_CFN_REG(lch) = frame_count; } + void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { u16 w; BUG_ON(omap_dma_in_1510_mode()); - w = omap_readw(OMAP_DMA_CCR2(lch)) & ~0x03; + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + + w = OMAP1_DMA_CCR2_REG(lch) & ~0x03; switch (mode) { case OMAP_DMA_CONSTANT_FILL: w |= 0x01; @@ -165,63 +215,84 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) default: BUG(); } - omap_writew(w, OMAP_DMA_CCR2(lch)); + OMAP1_DMA_CCR2_REG(lch) = w; - w = omap_readw(OMAP_DMA_LCH_CTRL(lch)) & ~0x0f; + w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f; /* Default is channel type 2D */ if (mode) { - omap_writew((u16)color, OMAP_DMA_COLOR_L(lch)); - omap_writew((u16)(color >> 16), OMAP_DMA_COLOR_U(lch)); + OMAP1_DMA_COLOR_L_REG(lch) = (u16)color; + OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16); w |= 1; /* Channel type G */ } - omap_writew(w, OMAP_DMA_LCH_CTRL(lch)); + OMAP1_DMA_LCH_CTRL_REG(lch) = w; } - +/* Note that src_port is only for omap1 */ void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start) + unsigned long src_start, + int src_ei, int src_fi) { - u16 w; + if (cpu_class_is_omap1()) { + OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2); + OMAP_DMA_CSDP_REG(lch) |= src_port << 2; + } + + OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12); + OMAP_DMA_CCR_REG(lch) |= src_amode << 12; + + if (cpu_class_is_omap1()) { + OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16; + OMAP1_DMA_CSSA_L_REG(lch) = src_start; + } - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~(0x1f << 2); - w |= src_port << 2; - omap_writew(w, OMAP_DMA_CSDP(lch)); + if (cpu_is_omap24xx()) + OMAP2_DMA_CSSA_REG(lch) = src_start; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(0x03 << 12); - w |= src_amode << 12; - omap_writew(w, OMAP_DMA_CCR(lch)); + OMAP_DMA_CSEI_REG(lch) = src_ei; + OMAP_DMA_CSFI_REG(lch) = src_fi; +} - omap_writew(src_start >> 16, OMAP_DMA_CSSA_U(lch)); - omap_writew(src_start, OMAP_DMA_CSSA_L(lch)); +void omap_set_dma_params(int lch, struct omap_dma_channel_params * params) +{ + omap_set_dma_transfer_params(lch, params->data_type, + params->elem_count, params->frame_count, + params->sync_mode, params->trigger, + params->src_or_dst_synch); + omap_set_dma_src_params(lch, params->src_port, + params->src_amode, params->src_start, + params->src_ei, params->src_fi); + + omap_set_dma_dest_params(lch, params->dst_port, + params->dst_amode, params->dst_start, + params->dst_ei, params->dst_fi); } void omap_set_dma_src_index(int lch, int eidx, int fidx) { - omap_writew(eidx, OMAP_DMA_CSEI(lch)); - omap_writew(fidx, OMAP_DMA_CSFI(lch)); + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + OMAP_DMA_CSEI_REG(lch) = eidx; + OMAP_DMA_CSFI_REG(lch) = fidx; } void omap_set_dma_src_data_pack(int lch, int enable) { - u16 w; - - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 6); - w |= enable ? (1 << 6) : 0; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6); + if (enable) + OMAP_DMA_CSDP_REG(lch) |= (1 << 6); } void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7); - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 7); switch (burst_mode) { case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - w |= (0x01 << 7); + OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7); break; case OMAP_DMA_DATA_BURST_8: /* not supported by current hardware @@ -231,110 +302,283 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) default: BUG(); } - omap_writew(w, OMAP_DMA_CSDP(lch)); } +/* Note that dest_port is only for OMAP1 */ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start) + unsigned long dest_start, + int dst_ei, int dst_fi) { - u16 w; + if (cpu_class_is_omap1()) { + OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9); + OMAP_DMA_CSDP_REG(lch) |= dest_port << 9; + } - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~(0x1f << 9); - w |= dest_port << 9; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14); + OMAP_DMA_CCR_REG(lch) |= dest_amode << 14; + + if (cpu_class_is_omap1()) { + OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16; + OMAP1_DMA_CDSA_L_REG(lch) = dest_start; + } - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(0x03 << 14); - w |= dest_amode << 14; - omap_writew(w, OMAP_DMA_CCR(lch)); + if (cpu_is_omap24xx()) + OMAP2_DMA_CDSA_REG(lch) = dest_start; - omap_writew(dest_start >> 16, OMAP_DMA_CDSA_U(lch)); - omap_writew(dest_start, OMAP_DMA_CDSA_L(lch)); + OMAP_DMA_CDEI_REG(lch) = dst_ei; + OMAP_DMA_CDFI_REG(lch) = dst_fi; } void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - omap_writew(eidx, OMAP_DMA_CDEI(lch)); - omap_writew(fidx, OMAP_DMA_CDFI(lch)); + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + OMAP_DMA_CDEI_REG(lch) = eidx; + OMAP_DMA_CDFI_REG(lch) = fidx; } void omap_set_dma_dest_data_pack(int lch, int enable) { - u16 w; - - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 13); - w |= enable ? (1 << 13) : 0; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13); + if (enable) + OMAP_DMA_CSDP_REG(lch) |= 1 << 13; } void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14); - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 14); switch (burst_mode) { case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - w |= (0x01 << 14); + OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14); break; case OMAP_DMA_DATA_BURST_8: - w |= (0x03 << 14); + OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14); break; default: printk(KERN_ERR "Invalid DMA burst mode\n"); BUG(); return; } - omap_writew(w, OMAP_DMA_CSDP(lch)); } -static inline void init_intr(int lch) +static inline void omap_enable_channel_irq(int lch) { - u16 w; + u32 status; /* Read CSR to make sure it's cleared. */ - w = omap_readw(OMAP_DMA_CSR(lch)); + status = OMAP_DMA_CSR_REG(lch); + /* Enable some nice interrupts. */ - omap_writew(dma_chan[lch].enabled_irqs, OMAP_DMA_CICR(lch)); + OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs; + dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } -static inline void enable_lnk(int lch) +static void omap_disable_channel_irq(int lch) { - u16 w; + if (cpu_is_omap24xx()) + OMAP_DMA_CICR_REG(lch) = 0; +} + +void omap_enable_dma_irq(int lch, u16 bits) +{ + dma_chan[lch].enabled_irqs |= bits; +} - /* Clear the STOP_LNK bits */ - w = omap_readw(OMAP_DMA_CLNK_CTRL(lch)); - w &= ~(1 << 14); - omap_writew(w, OMAP_DMA_CLNK_CTRL(lch)); +void omap_disable_dma_irq(int lch, u16 bits) +{ + dma_chan[lch].enabled_irqs &= ~bits; +} + +static inline void enable_lnk(int lch) +{ + if (cpu_class_is_omap1()) + OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14); - /* And set the ENABLE_LNK bits */ + /* Set the ENABLE_LNK bits */ if (dma_chan[lch].next_lch != -1) - omap_writew(dma_chan[lch].next_lch | (1 << 15), - OMAP_DMA_CLNK_CTRL(lch)); + OMAP_DMA_CLNK_CTRL_REG(lch) = + dma_chan[lch].next_lch | (1 << 15); } static inline void disable_lnk(int lch) { - u16 w; - /* Disable interrupts */ - omap_writew(0, OMAP_DMA_CICR(lch)); + if (cpu_class_is_omap1()) { + OMAP_DMA_CICR_REG(lch) = 0; + /* Set the STOP_LNK bit */ + OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14; + } - /* Set the STOP_LNK bit */ - w = omap_readw(OMAP_DMA_CLNK_CTRL(lch)); - w |= (1 << 14); - w = omap_writew(w, OMAP_DMA_CLNK_CTRL(lch)); + if (cpu_is_omap24xx()) { + omap_disable_channel_irq(lch); + /* Clear the ENABLE_LNK bit */ + OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15); + } dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } -void omap_start_dma(int lch) +static inline void omap2_enable_irq_lch(int lch) { - u16 w; + u32 val; + + if (!cpu_is_omap24xx()) + return; + + val = omap_readl(OMAP_DMA4_IRQENABLE_L0); + val |= 1 << lch; + omap_writel(val, OMAP_DMA4_IRQENABLE_L0); +} + +int omap_request_dma(int dev_id, const char *dev_name, + void (* callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch_out) +{ + int ch, free_ch = -1; + unsigned long flags; + struct omap_dma_lch *chan; + + spin_lock_irqsave(&dma_chan_lock, flags); + for (ch = 0; ch < dma_chan_count; ch++) { + if (free_ch == -1 && dma_chan[ch].dev_id == -1) { + free_ch = ch; + if (dev_id == 0) + break; + } + } + if (free_ch == -1) { + spin_unlock_irqrestore(&dma_chan_lock, flags); + return -EBUSY; + } + chan = dma_chan + free_ch; + chan->dev_id = dev_id; + + if (cpu_class_is_omap1()) + clear_lch_regs(free_ch); + if (cpu_is_omap24xx()) + omap_clear_dma(free_ch); + + spin_unlock_irqrestore(&dma_chan_lock, flags); + + chan->dev_name = dev_name; + chan->callback = callback; + chan->data = data; + chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | + OMAP_DMA_BLOCK_IRQ; + + if (cpu_is_omap24xx()) + chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ; + + if (cpu_is_omap16xx()) { + /* If the sync device is set, configure it dynamically. */ + if (dev_id != 0) { + set_gdma_dev(free_ch + 1, dev_id); + dev_id = free_ch + 1; + } + /* Disable the 1510 compatibility mode and set the sync device + * id. */ + OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10); + } else if (cpu_is_omap730() || cpu_is_omap15xx()) { + OMAP_DMA_CCR_REG(free_ch) = dev_id; + } + + if (cpu_is_omap24xx()) { + omap2_enable_irq_lch(free_ch); + + omap_enable_channel_irq(free_ch); + /* Clear the CSR register and IRQ status register */ + OMAP_DMA_CSR_REG(free_ch) = 0x0; + omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0); + } + + *dma_ch_out = free_ch; + + return 0; +} + +void omap_free_dma(int lch) +{ + unsigned long flags; + + spin_lock_irqsave(&dma_chan_lock, flags); + if (dma_chan[lch].dev_id == -1) { + printk("omap_dma: trying to free nonallocated DMA channel %d\n", + lch); + spin_unlock_irqrestore(&dma_chan_lock, flags); + return; + } + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); + + if (cpu_class_is_omap1()) { + /* Disable all DMA interrupts for the channel. */ + OMAP_DMA_CICR_REG(lch) = 0; + /* Make sure the DMA transfer is stopped. */ + OMAP_DMA_CCR_REG(lch) = 0; + } + + if (cpu_is_omap24xx()) { + u32 val; + /* Disable interrupts */ + val = omap_readl(OMAP_DMA4_IRQENABLE_L0); + val &= ~(1 << lch); + omap_writel(val, OMAP_DMA4_IRQENABLE_L0); + + /* Clear the CSR register and IRQ status register */ + OMAP_DMA_CSR_REG(lch) = 0x0; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + val |= 1 << lch; + omap_writel(val, OMAP_DMA4_IRQSTATUS_L0); + + /* Disable all DMA interrupts for the channel. */ + OMAP_DMA_CICR_REG(lch) = 0; + + /* Make sure the DMA transfer is stopped. */ + OMAP_DMA_CCR_REG(lch) = 0; + omap_clear_dma(lch); + } +} + +/* + * Clears any DMA state so the DMA engine is ready to restart with new buffers + * through omap_start_dma(). Any buffers in flight are discarded. + */ +void omap_clear_dma(int lch) +{ + unsigned long flags; + + local_irq_save(flags); + + if (cpu_class_is_omap1()) { + int status; + OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN; + + /* Clear pending interrupts */ + status = OMAP_DMA_CSR_REG(lch); + } + + if (cpu_is_omap24xx()) { + int i; + u32 lch_base = OMAP24XX_DMA_BASE + lch * 0x60 + 0x80; + for (i = 0; i < 0x44; i += 4) + omap_writel(0, lch_base + i); + } + + local_irq_restore(flags); +} + +void omap_start_dma(int lch) +{ if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch; char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT]; @@ -348,31 +592,37 @@ void omap_start_dma(int lch) do { next_lch = dma_chan[cur_lch].next_lch; - /* The loop case: we've been here already */ + /* The loop case: we've been here already */ if (dma_chan_link_map[cur_lch]) break; /* Mark the current channel */ dma_chan_link_map[cur_lch] = 1; enable_lnk(cur_lch); - init_intr(cur_lch); + omap_enable_channel_irq(cur_lch); cur_lch = next_lch; } while (next_lch != -1); + } else if (cpu_is_omap24xx()) { + /* Errata: Need to write lch even if not using chaining */ + OMAP_DMA_CLNK_CTRL_REG(lch) = lch; } - init_intr(lch); + omap_enable_channel_irq(lch); + + /* Errata: On ES2.0 BUFFERING disable must be set. + * This will always fail on ES1.0 */ + if (cpu_is_omap24xx()) { + OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN; + } + + OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN; - w = omap_readw(OMAP_DMA_CCR(lch)); - w |= OMAP_DMA_CCR_EN; - omap_writew(w, OMAP_DMA_CCR(lch)); dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } void omap_stop_dma(int lch) { - u16 w; - if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT]; @@ -393,146 +643,83 @@ void omap_stop_dma(int lch) return; } + /* Disable all interrupts on the channel */ - omap_writew(0, OMAP_DMA_CICR(lch)); + if (cpu_class_is_omap1()) + OMAP_DMA_CICR_REG(lch) = 0; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~OMAP_DMA_CCR_EN; - omap_writew(w, OMAP_DMA_CCR(lch)); + OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN; dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } -void omap_enable_dma_irq(int lch, u16 bits) +/* + * Returns current physical source address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. Note that in continuous mode there + * is a chance for CSSA_L register overflow inbetween the two reads resulting + * in incorrect return value. + */ +dma_addr_t omap_get_dma_src_pos(int lch) { - dma_chan[lch].enabled_irqs |= bits; -} + dma_addr_t offset; -void omap_disable_dma_irq(int lch, u16 bits) -{ - dma_chan[lch].enabled_irqs &= ~bits; -} + if (cpu_class_is_omap1()) + offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) | + (OMAP1_DMA_CSSA_U_REG(lch) << 16)); -static int dma_handle_ch(int ch) -{ - u16 csr; + if (cpu_is_omap24xx()) + offset = OMAP_DMA_CSAC_REG(lch); - if (enable_1510_mode && ch >= 6) { - csr = dma_chan[ch].saved_csr; - dma_chan[ch].saved_csr = 0; - } else - csr = omap_readw(OMAP_DMA_CSR(ch)); - if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { - dma_chan[ch + 6].saved_csr = csr >> 7; - csr &= 0x7f; - } - if ((csr & 0x3f) == 0) - return 0; - if (unlikely(dma_chan[ch].dev_id == -1)) { - printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n", - ch, csr); - return 0; - } - if (unlikely(csr & OMAP_DMA_TOUT_IRQ)) - printk(KERN_WARNING "DMA timeout with device %d\n", dma_chan[ch].dev_id); - if (unlikely(csr & OMAP_DMA_DROP_IRQ)) - printk(KERN_WARNING "DMA synchronization event drop occurred with device %d\n", - dma_chan[ch].dev_id); - if (likely(csr & OMAP_DMA_BLOCK_IRQ)) - dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; - if (likely(dma_chan[ch].callback != NULL)) - dma_chan[ch].callback(ch, csr, dma_chan[ch].data); - return 1; + return offset; } -static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +/* + * Returns current physical destination address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. Note that in continuous mode there + * is a chance for CDSA_L register overflow inbetween the two reads resulting + * in incorrect return value. + */ +dma_addr_t omap_get_dma_dst_pos(int lch) { - int ch = ((int) dev_id) - 1; - int handled = 0; + dma_addr_t offset; - for (;;) { - int handled_now = 0; + if (cpu_class_is_omap1()) + offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) | + (OMAP1_DMA_CDSA_U_REG(lch) << 16)); - handled_now += dma_handle_ch(ch); - if (enable_1510_mode && dma_chan[ch + 6].saved_csr) - handled_now += dma_handle_ch(ch + 6); - if (!handled_now) - break; - handled += handled_now; - } + if (cpu_is_omap24xx()) + offset = OMAP2_DMA_CDSA_REG(lch); - return handled ? IRQ_HANDLED : IRQ_NONE; + return offset; } -int omap_request_dma(int dev_id, const char *dev_name, - void (* callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch_out) +/* + * Returns current source transfer counting for the given DMA channel. + * Can be used to monitor the progress of a transfer inside a block. + * It must be called with disabled interrupts. + */ +int omap_get_dma_src_addr_counter(int lch) { - int ch, free_ch = -1; - unsigned long flags; - struct omap_dma_lch *chan; - - spin_lock_irqsave(&dma_chan_lock, flags); - for (ch = 0; ch < dma_chan_count; ch++) { - if (free_ch == -1 && dma_chan[ch].dev_id == -1) { - free_ch = ch; - if (dev_id == 0) - break; - } - } - if (free_ch == -1) { - spin_unlock_irqrestore(&dma_chan_lock, flags); - return -EBUSY; - } - chan = dma_chan + free_ch; - chan->dev_id = dev_id; - clear_lch_regs(free_ch); - spin_unlock_irqrestore(&dma_chan_lock, flags); - - chan->dev_id = dev_id; - chan->dev_name = dev_name; - chan->callback = callback; - chan->data = data; - chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - - if (cpu_is_omap16xx()) { - /* If the sync device is set, configure it dynamically. */ - if (dev_id != 0) { - set_gdma_dev(free_ch + 1, dev_id); - dev_id = free_ch + 1; - } - /* Disable the 1510 compatibility mode and set the sync device - * id. */ - omap_writew(dev_id | (1 << 10), OMAP_DMA_CCR(free_ch)); - } else { - omap_writew(dev_id, OMAP_DMA_CCR(free_ch)); - } - *dma_ch_out = free_ch; - - return 0; + return (dma_addr_t) OMAP_DMA_CSAC_REG(lch); } -void omap_free_dma(int ch) +int omap_dma_running(void) { - unsigned long flags; + int lch; - spin_lock_irqsave(&dma_chan_lock, flags); - if (dma_chan[ch].dev_id == -1) { - printk("omap_dma: trying to free nonallocated DMA channel %d\n", ch); - spin_unlock_irqrestore(&dma_chan_lock, flags); - return; - } - dma_chan[ch].dev_id = -1; - spin_unlock_irqrestore(&dma_chan_lock, flags); + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; - /* Disable all DMA interrupts for the channel. */ - omap_writew(0, OMAP_DMA_CICR(ch)); - /* Make sure the DMA transfer is stopped. */ - omap_writew(0, OMAP_DMA_CCR(ch)); -} + for (lch = 0; lch < dma_chan_count; lch++) + if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN) + return 1; -int omap_dma_in_1510_mode(void) -{ - return enable_1510_mode; + return 0; } /* @@ -550,7 +737,8 @@ void omap_dma_link_lch (int lch_head, int lch_queue) if ((dma_chan[lch_head].dev_id == -1) || (dma_chan[lch_queue].dev_id == -1)) { - printk(KERN_ERR "omap_dma: trying to link non requested channels\n"); + printk(KERN_ERR "omap_dma: trying to link " + "non requested channels\n"); dump_stack(); } @@ -570,20 +758,149 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue) if (dma_chan[lch_head].next_lch != lch_queue || dma_chan[lch_head].next_lch == -1) { - printk(KERN_ERR "omap_dma: trying to unlink non linked channels\n"); + printk(KERN_ERR "omap_dma: trying to unlink " + "non linked channels\n"); dump_stack(); } if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) { - printk(KERN_ERR "omap_dma: You need to stop the DMA channels before unlinking\n"); + printk(KERN_ERR "omap_dma: You need to stop the DMA channels " + "before unlinking\n"); dump_stack(); } dma_chan[lch_head].next_lch = -1; } +/*----------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_OMAP1 + +static int omap1_dma_handle_ch(int ch) +{ + u16 csr; + + if (enable_1510_mode && ch >= 6) { + csr = dma_chan[ch].saved_csr; + dma_chan[ch].saved_csr = 0; + } else + csr = OMAP_DMA_CSR_REG(ch); + if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { + dma_chan[ch + 6].saved_csr = csr >> 7; + csr &= 0x7f; + } + if ((csr & 0x3f) == 0) + return 0; + if (unlikely(dma_chan[ch].dev_id == -1)) { + printk(KERN_WARNING "Spurious interrupt from DMA channel " + "%d (CSR %04x)\n", ch, csr); + return 0; + } + if (unlikely(csr & OMAP_DMA_TOUT_IRQ)) + printk(KERN_WARNING "DMA timeout with device %d\n", + dma_chan[ch].dev_id); + if (unlikely(csr & OMAP_DMA_DROP_IRQ)) + printk(KERN_WARNING "DMA synchronization event drop occurred " + "with device %d\n", dma_chan[ch].dev_id); + if (likely(csr & OMAP_DMA_BLOCK_IRQ)) + dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, csr, dma_chan[ch].data); + return 1; +} + +static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + int ch = ((int) dev_id) - 1; + int handled = 0; + + for (;;) { + int handled_now = 0; + + handled_now += omap1_dma_handle_ch(ch); + if (enable_1510_mode && dma_chan[ch + 6].saved_csr) + handled_now += omap1_dma_handle_ch(ch + 6); + if (!handled_now) + break; + handled += handled_now; + } + + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +#else +#define omap1_dma_irq_handler NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2 + +static int omap2_dma_handle_ch(int ch) +{ + u32 status = OMAP_DMA_CSR_REG(ch); + u32 val; + + if (!status) + return 0; + if (unlikely(dma_chan[ch].dev_id == -1)) + return 0; + /* REVISIT: According to 24xx TRM, there's no TOUT_IE */ + if (unlikely(status & OMAP_DMA_TOUT_IRQ)) + printk(KERN_INFO "DMA timeout with device %d\n", + dma_chan[ch].dev_id); + if (unlikely(status & OMAP_DMA_DROP_IRQ)) + printk(KERN_INFO + "DMA synchronization event drop occurred with device " + "%d\n", dma_chan[ch].dev_id); + + if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) + printk(KERN_INFO "DMA transaction error with device %d\n", + dma_chan[ch].dev_id); + + OMAP_DMA_CSR_REG(ch) = 0x20; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + /* ch in this function is from 0-31 while in register it is 1-32 */ + val = 1 << (ch); + omap_writel(val, OMAP_DMA4_IRQSTATUS_L0); + + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, status, dma_chan[ch].data); + + return 0; +} + +/* STATUS register count is from 1-32 while our is 0-31 */ +static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + u32 val; + int i; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + + for (i = 1; i <= OMAP_LOGICAL_DMA_CH_COUNT; i++) { + int active = val & (1 << (i - 1)); + if (active) + omap2_dma_handle_ch(i - 1); + } + + return IRQ_HANDLED; +} + +static struct irqaction omap24xx_dma_irq = { + .name = "DMA", + .handler = omap2_dma_irq_handler, + .flags = SA_INTERRUPT +}; + +#else +static struct irqaction omap24xx_dma_irq; +#endif + +/*----------------------------------------------------------------------------*/ static struct lcd_dma_info { spinlock_t lock; @@ -795,7 +1112,7 @@ static void set_b1_regs(void) /* Always set the source port as SDRAM for now*/ w &= ~(0x03 << 6); if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ + w |= 1 << 1; /* Block interrupt enable */ else w &= ~(1 << 1); omap_writew(w, OMAP1610_DMA_LCD_CTRL); @@ -814,7 +1131,8 @@ static void set_b1_regs(void) omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); } -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) { u16 w; @@ -870,7 +1188,8 @@ void omap_free_lcd_dma(void) return; } if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); + omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, + OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; spin_unlock(&lcd_dma.lock); } @@ -939,93 +1258,24 @@ void omap_stop_lcd_dma(void) omap_writew(w, OMAP1610_DMA_LCD_CTRL); } -/* - * Clears any DMA state so the DMA engine is ready to restart with new buffers - * through omap_start_dma(). Any buffers in flight are discarded. - */ -void omap_clear_dma(int lch) -{ - unsigned long flags; - int status; - - local_irq_save(flags); - omap_writew(omap_readw(OMAP_DMA_CCR(lch)) & ~OMAP_DMA_CCR_EN, - OMAP_DMA_CCR(lch)); - status = OMAP_DMA_CSR(lch); /* clear pending interrupts */ - local_irq_restore(flags); -} - -/* - * Returns current physical source address for the given DMA channel. - * If the channel is running the caller must disable interrupts prior calling - * this function and process the returned value before re-enabling interrupt to - * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting - * in incorrect return value. - */ -dma_addr_t omap_get_dma_src_pos(int lch) -{ - return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) | - (omap_readw(OMAP_DMA_CSSA_U(lch)) << 16)); -} - -/* - * Returns current physical destination address for the given DMA channel. - * If the channel is running the caller must disable interrupts prior calling - * this function and process the returned value before re-enabling interrupt to - * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting - * in incorrect return value. - */ -dma_addr_t omap_get_dma_dst_pos(int lch) -{ - return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) | - (omap_readw(OMAP_DMA_CDSA_U(lch)) << 16)); -} - -/* - * Returns current source transfer counting for the given DMA channel. - * Can be used to monitor the progress of a transfer inside a block. - * It must be called with disabled interrupts. - */ -int omap_get_dma_src_addr_counter(int lch) -{ - return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch)); -} - -int omap_dma_running(void) -{ - int lch; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) - return 1; - - for (lch = 0; lch < dma_chan_count; lch++) { - u16 w; - - w = omap_readw(OMAP_DMA_CCR(lch)); - if (w & OMAP_DMA_CCR_EN) - return 1; - } - return 0; -} +/*----------------------------------------------------------------------------*/ static int __init omap_init_dma(void) { int ch, r; - if (cpu_is_omap1510()) { - printk(KERN_INFO "DMA support for OMAP1510 initialized\n"); + if (cpu_is_omap15xx()) { + printk(KERN_INFO "DMA support for OMAP15xx initialized\n"); dma_chan_count = 9; enable_1510_mode = 1; } else if (cpu_is_omap16xx() || cpu_is_omap730()) { printk(KERN_INFO "OMAP DMA hardware version %d\n", omap_readw(OMAP_DMA_HW_ID)); printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n", - (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | omap_readw(OMAP_DMA_CAPS_0_L), - (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | omap_readw(OMAP_DMA_CAPS_1_L), + (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | + omap_readw(OMAP_DMA_CAPS_0_L), + (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | + omap_readw(OMAP_DMA_CAPS_1_L), omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3), omap_readw(OMAP_DMA_CAPS_4)); if (!enable_1510_mode) { @@ -1038,6 +1288,11 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; + } else if (cpu_is_omap24xx()) { + u8 revision = omap_readb(OMAP_DMA4_REVISION); + printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", + revision >> 4, revision & 0xf); + dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT; } else { dma_chan_count = 0; return 0; @@ -1049,41 +1304,56 @@ static int __init omap_init_dma(void) memset(&dma_chan, 0, sizeof(dma_chan)); for (ch = 0; ch < dma_chan_count; ch++) { + omap_clear_dma(ch); dma_chan[ch].dev_id = -1; dma_chan[ch].next_lch = -1; if (ch >= 6 && enable_1510_mode) continue; - /* request_irq() doesn't like dev_id (ie. ch) being zero, - * so we have to kludge around this. */ - r = request_irq(dma_irq[ch], dma_irq_handler, 0, "DMA", - (void *) (ch + 1)); + if (cpu_class_is_omap1()) { + /* request_irq() doesn't like dev_id (ie. ch) being + * zero, so we have to kludge around this. */ + r = request_irq(omap1_dma_irq[ch], + omap1_dma_irq_handler, 0, "DMA", + (void *) (ch + 1)); + if (r != 0) { + int i; + + printk(KERN_ERR "unable to request IRQ %d " + "for DMA (error %d)\n", + omap1_dma_irq[ch], r); + for (i = 0; i < ch; i++) + free_irq(omap1_dma_irq[i], + (void *) (i + 1)); + return r; + } + } + } + + if (cpu_is_omap24xx()) + setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq); + + /* FIXME: Update LCD DMA to work on 24xx */ + if (cpu_class_is_omap1()) { + r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, + "LCD DMA", NULL); if (r != 0) { int i; - printk(KERN_ERR "unable to request IRQ %d for DMA (error %d)\n", - dma_irq[ch], r); - for (i = 0; i < ch; i++) - free_irq(dma_irq[i], (void *) (i + 1)); + printk(KERN_ERR "unable to request IRQ for LCD DMA " + "(error %d)\n", r); + for (i = 0; i < dma_chan_count; i++) + free_irq(omap1_dma_irq[i], (void *) (i + 1)); return r; } } - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL); - if (r != 0) { - int i; - printk(KERN_ERR "unable to request IRQ for LCD DMA (error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(dma_irq[i], (void *) (i + 1)); - return r; - } return 0; } arch_initcall(omap_init_dma); - EXPORT_SYMBOL(omap_get_dma_src_pos); EXPORT_SYMBOL(omap_get_dma_dst_pos); EXPORT_SYMBOL(omap_get_dma_src_addr_counter); @@ -1109,6 +1379,8 @@ EXPORT_SYMBOL(omap_set_dma_dest_index); EXPORT_SYMBOL(omap_set_dma_dest_data_pack); EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); +EXPORT_SYMBOL(omap_set_dma_params); + EXPORT_SYMBOL(omap_dma_link_lch); EXPORT_SYMBOL(omap_dma_unlink_lch); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a1468d7326eb..38d7ebf87920 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -26,7 +26,7 @@ */ #include <linux/init.h> -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #include <asm/arch/dmtimer.h> #include <asm/io.h> #include <asm/arch/irqs.h> diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 55059a24ad41..76f721d85137 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -140,7 +140,7 @@ static struct gpio_bank gpio_bank_1610[5] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } @@ -173,7 +173,7 @@ static int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; @@ -222,7 +222,7 @@ static inline int gpio_valid(int gpio) return -1; return 0; } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510() && gpio < 16) return 0; #endif @@ -654,7 +654,7 @@ int omap_request_gpio(int gpio) /* Set trigger to none. You need to enable the trigger after request_irq */ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { void __iomem *reg; @@ -739,7 +739,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, bank = (struct gpio_bank *) desc->data; if (bank->method == METHOD_MPUIO) isr_reg = bank->base + OMAP_MPUIO_GPIO_INT; -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; #endif @@ -774,7 +774,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, d = irq_desc + gpio_irq; desc_handle_irq(gpio_irq, d, regs); } - } + } } static void gpio_ack_irq(unsigned int irq) @@ -837,8 +837,9 @@ static struct irqchip mpuio_irq_chip = { .unmask = mpuio_unmask_irq }; -static int initialized = 0; -static struct clk * gpio_ck = NULL; +static int initialized; +static struct clk * gpio_ick; +static struct clk * gpio_fck; static int __init _omap_gpio_init(void) { @@ -848,14 +849,26 @@ static int __init _omap_gpio_init(void) initialized = 1; if (cpu_is_omap1510()) { - gpio_ck = clk_get(NULL, "arm_gpio_ck"); - if (IS_ERR(gpio_ck)) + gpio_ick = clk_get(NULL, "arm_gpio_ck"); + if (IS_ERR(gpio_ick)) printk("Could not get arm_gpio_ck\n"); else - clk_use(gpio_ck); + clk_use(gpio_ick); + } + if (cpu_is_omap24xx()) { + gpio_ick = clk_get(NULL, "gpios_ick"); + if (IS_ERR(gpio_ick)) + printk("Could not get gpios_ick\n"); + else + clk_use(gpio_ick); + gpio_fck = clk_get(NULL, "gpios_fck"); + if (IS_ERR(gpio_ick)) + printk("Could not get gpios_fck\n"); + else + clk_use(gpio_fck); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; @@ -901,7 +914,7 @@ static int __init _omap_gpio_init(void) if (bank->method == METHOD_MPUIO) { omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); @@ -1038,6 +1051,7 @@ static struct sys_device omap_gpio_device = { /* * This may get called early from board specific init + * for boards that have interrupts routed via FPGA. */ int omap_gpio_init(void) { diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 9c9b7df3faf6..ea9475c86656 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -491,17 +491,20 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT); + OMAP_DMA_SYNC_ELEMENT, + 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1); + mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1, + 0, 0); omap_set_dma_src_params(mcbsp[id].dma_tx_lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, - buffer); + buffer, + 0, 0); omap_start_dma(mcbsp[id].dma_tx_lch); wait_for_completion(&(mcbsp[id].tx_dma_completion)); @@ -531,17 +534,20 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT); + OMAP_DMA_SYNC_ELEMENT, + 0, 0); omap_set_dma_src_params(mcbsp[id].dma_rx_lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1); + mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1, + 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, - buffer); + buffer, + 0, 0); omap_start_dma(mcbsp[id].dma_rx_lch); wait_for_completion(&(mcbsp[id].rx_dma_completion)); @@ -643,7 +649,7 @@ static const struct omap_mcbsp_info mcbsp_730[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static const struct omap_mcbsp_info mcbsp_1510[] = { [0] = { .virt_base = OMAP1510_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, @@ -712,7 +718,7 @@ static int __init omap_mcbsp_init(void) mcbsp_count = ARRAY_SIZE(mcbsp_730); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { mcbsp_info = mcbsp_1510; mcbsp_count = ARRAY_SIZE(mcbsp_1510); diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 64482040f89e..8c1c016aa689 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -3,7 +3,7 @@ * * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003 - 2005 Nokia Corporation * * Written by Tony Lindgren <tony.lindgren@nokia.com> * @@ -25,38 +25,74 @@ #include <linux/config.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/kernel.h> #include <asm/system.h> #include <asm/io.h> #include <linux/spinlock.h> - -#define __MUX_C__ #include <asm/arch/mux.h> #ifdef CONFIG_OMAP_MUX +#define OMAP24XX_L4_BASE 0x48000000 +#define OMAP24XX_PULL_ENA (1 << 3) +#define OMAP24XX_PULL_UP (1 << 4) + +static struct pin_config * pin_table; +static unsigned long pin_table_sz; + +extern struct pin_config * omap730_pins; +extern struct pin_config * omap1xxx_pins; +extern struct pin_config * omap24xx_pins; + +int __init omap_mux_register(struct pin_config * pins, unsigned long size) +{ + pin_table = pins; + pin_table_sz = size; + + return 0; +} + /* * Sets the Omap MUX and PULL_DWN registers based on the table */ -int __init_or_module -omap_cfg_reg(const reg_cfg_t reg_cfg) +int __init_or_module omap_cfg_reg(const unsigned long index) { static DEFINE_SPINLOCK(mux_spin_lock); unsigned long flags; - reg_cfg_set *cfg; + struct pin_config *cfg; unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0, pull_orig = 0, pull = 0; unsigned int mask, warn = 0; - if (cpu_is_omap7xx()) - return 0; + if (!pin_table) + BUG(); - if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) { - printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg); - return -EINVAL; + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; } - cfg = (reg_cfg_set *)®_cfg_table[reg_cfg]; + cfg = (struct pin_config *)&pin_table[index]; + if (cpu_is_omap24xx()) { + u8 reg = 0; + + reg |= cfg->mask & 0x7; + if (cfg->pull_val) + reg |= OMAP24XX_PULL_ENA; + if(cfg->pu_pd_val) + reg |= OMAP24XX_PULL_UP; +#ifdef CONFIG_OMAP_MUX_DEBUG + printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n", + cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg, + omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg); +#endif + omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg); + + return 0; + } /* Check the mux register in question */ if (cfg->mux_reg) { @@ -157,7 +193,8 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) return 0; #endif } - EXPORT_SYMBOL(omap_cfg_reg); - +#else +#define omap_mux_init() do {} while(0) +#define omap_cfg_reg(x) do {} while(0) #endif /* CONFIG_OMAP_MUX */ diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 1fb16f9edfd5..b86148227480 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -25,7 +25,6 @@ #include <linux/config.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> @@ -35,7 +34,7 @@ #include <asm/io.h> #include <asm/hardware/clock.h> -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #define OCPI_BASE 0xfffec320 #define OCPI_FAULT (OCPI_BASE + 0x00) diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index e15c6c1ddec9..1a24e2c10714 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -54,11 +54,12 @@ #include <asm/arch/tps65010.h> #include <asm/arch/dsp_common.h> -#include "clock.h" -#include "sram.h" +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; +static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -120,8 +121,8 @@ void omap_pm_idle(void) */ static void omap_pm_wakeup_setup(void) { - u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ); - u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD); + u32 level1_wake = 0; + u32 level2_wake = OMAP_IRQ_BIT(INT_UART2); /* * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, @@ -129,19 +130,29 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap1510() || cpu_is_omap16xx()) - level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1); - else if (cpu_is_omap730()) - level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1); + if (cpu_is_omap730()) + level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_730_IH2_IRQ); + else if (cpu_is_omap1510()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1510_IH2_IRQ); + else if (cpu_is_omap16xx()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1610_IH2_IRQ); omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap1510()) + if (cpu_is_omap730()) { + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); + } else if (cpu_is_omap1510()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); omap_writel(~level2_wake, OMAP_IH2_MIR); - - /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ - if (cpu_is_omap16xx()) { + } else if (cpu_is_omap16xx()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); omap_writel(~level2_wake, OMAP_IH2_0_MIR); + + /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); omap_writel(~0x0, OMAP_IH2_2_MIR); omap_writel(~0x0, OMAP_IH2_3_MIR); @@ -185,7 +196,17 @@ void omap_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_SAVE(OMAP_IH1_MIR); + MPUI730_SAVE(OMAP_IH2_0_MIR); + MPUI730_SAVE(OMAP_IH2_1_MIR); + MPUI730_SAVE(MPUI_CTRL); + MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI730_SAVE(MPUI_DSP_API_CONFIG); + MPUI730_SAVE(EMIFS_CONFIG); + MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + + } else if (cpu_is_omap1510()) { MPUI1510_SAVE(OMAP_IH1_MIR); MPUI1510_SAVE(OMAP_IH2_MIR); MPUI1510_SAVE(MPUI_CTRL); @@ -280,7 +301,13 @@ void omap_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_RESTORE(EMIFS_CONFIG); + MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI730_RESTORE(OMAP_IH1_MIR); + MPUI730_RESTORE(OMAP_IH2_0_MIR); + MPUI730_RESTORE(OMAP_IH2_1_MIR); + } else if (cpu_is_omap1510()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); MPUI1510_RESTORE(MPUI_DSP_API_CONFIG); @@ -355,7 +382,14 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_SAVE(MPUI_CTRL); + MPUI730_SAVE(MPUI_DSP_STATUS); + MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI730_SAVE(MPUI_DSP_API_CONFIG); + MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + MPUI730_SAVE(EMIFS_CONFIG); + } else if (cpu_is_omap1510()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); @@ -404,7 +438,21 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + my_buffer_offset += sprintf(my_base + my_buffer_offset, + "MPUI730_CTRL_REG 0x%-8x \n" + "MPUI730_DSP_STATUS_REG: 0x%-8x \n" + "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI730_SHOW(MPUI_CTRL), + MPUI730_SHOW(MPUI_DSP_STATUS), + MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI730_SHOW(MPUI_DSP_API_CONFIG), + MPUI730_SHOW(EMIFF_SDRAM_CONFIG), + MPUI730_SHOW(EMIFS_CONFIG)); + } else if (cpu_is_omap1510()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI1510_CTRL_REG 0x%-8x \n" "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" @@ -461,7 +509,7 @@ static void omap_pm_init_proc(void) * @state: suspend state we're entering. * */ -//#include <asm/arch/hardware.h> +//#include <asm/hardware.h> static int omap_pm_prepare(suspend_state_t state) { @@ -553,7 +601,12 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend, + omap730_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, + omap730_cpu_suspend_sz); + } else if (cpu_is_omap1510()) { omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, omap1510_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, @@ -572,7 +625,11 @@ static int __init omap_pm_init(void) pm_idle = omap_pm_idle; - setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + if (cpu_is_omap730()) + setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + else if (cpu_is_omap16xx()) + setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + #if 0 /* --- BEGIN BOARD-DEPENDENT CODE --- */ /* Sleepx mask direction */ @@ -591,7 +648,9 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap16xx()) + if (cpu_is_omap730()) + omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); pm_set_ops(&omap_pm_ops); @@ -600,8 +659,10 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); + if (cpu_is_omap16xx()) { + /* configure LOW_PWR pin */ + omap_cfg_reg(T20_1610_LOW_PWR); + } return 0; } diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S index 9f745836f6aa..4cd7d292f854 100644 --- a/arch/arm/plat-omap/sleep.S +++ b/arch/arm/plat-omap/sleep.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/plat-omap/sleep.S * - * Low-level OMAP1510/1610 sleep/wakeUp support + * Low-level OMAP730/1510/1610 sleep/wakeUp support * * Initial SA1110 code: * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> @@ -52,7 +52,57 @@ * processor specific functions here. */ -#ifdef CONFIG_ARCH_OMAP1510 +#if defined(CONFIG_ARCH_OMAP730) +ENTRY(omap730_idle_loop_suspend) + + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + @ load base address of ARM_IDLECT1 and ARM_IDLECT2 + mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 + + @ turn off clock domains + @ get ARM_IDLECT2 into r2 + ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + + @ request ARM idle + @ get ARM_IDLECT1 into r1 + ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + orr r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff + strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + mov r5, #IDLE_WAIT_CYCLES & 0xff + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 +l_730: subs r5, r5, #1 + bne l_730 +/* + * Let's wait for the next clock tick to wake us up. + */ + mov r0, #0 + mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt +/* + * omap730_idle_loop_suspend()'s resume point. + * + * It will just start executing here, so we'll restore stuff from the + * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. + */ + + @ restore ARM_IDLECT1 and ARM_IDLECT2 and return + @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 + strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + +ENTRY(omap730_idle_loop_suspend_sz) + .word . - omap730_idle_loop_suspend +#endif /* CONFIG_ARCH_OMAP730 */ + +#ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_idle_loop_suspend) stmfd sp!, {r0 - r12, lr} @ save registers on stack @@ -100,7 +150,7 @@ l_1510: subs r5, r5, #1 ENTRY(omap1510_idle_loop_suspend_sz) .word . - omap1510_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #if defined(CONFIG_ARCH_OMAP16XX) ENTRY(omap1610_idle_loop_suspend) @@ -169,7 +219,86 @@ ENTRY(omap1610_idle_loop_suspend_sz) * */ -#ifdef CONFIG_ARCH_OMAP1510 +#if defined(CONFIG_ARCH_OMAP730) +ENTRY(omap730_cpu_suspend) + + @ save registers on stack + stmfd sp!, {r0 - r12, lr} + + @ Drain write cache + mov r4, #0 + mcr p15, 0, r0, c7, c10, 4 + nop + + @ load base address of Traffic Controller + mov r6, #TCMIF_ASM_BASE & 0xff000000 + orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 + orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 + + @ prepare to put SDRAM into self-refresh manually + ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 + orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff + str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + + @ prepare to put EMIFS to Sleep + ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff + str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + + @ load base address of ARM_IDLECT1 and ARM_IDLECT2 + mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 + + @ turn off clock domains + @ do not disable PERCK (0x04) + mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + + @ request ARM idle + mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 + strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + @ disable instruction cache + mrc p15, 0, r9, c1, c0, 0 + bic r2, r9, #0x1000 + mcr p15, 0, r2, c1, c0, 0 + nop + +/* + * Let's wait for the next wake up event to wake us up. r0 can't be + * used here because r0 holds ARM_IDLECT1 + */ + mov r2, #0 + mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt +/* + * omap730_cpu_suspend()'s resume point. + * + * It will just start executing here, so we'll restore stuff from the + * stack. + */ + @ re-enable Icache + mcr p15, 0, r9, c1, c0, 0 + + @ reset the ARM_IDLECT1 and ARM_IDLECT2. + strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + @ Restore EMIFF controls + str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + + @ restore regs and return + ldmfd sp!, {r0 - r12, pc} + +ENTRY(omap730_cpu_suspend_sz) + .word . - omap730_cpu_suspend +#endif /* CONFIG_ARCH_OMAP730 */ + +#ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_cpu_suspend) @ save registers on stack @@ -241,7 +370,7 @@ l_1510_2: ENTRY(omap1510_cpu_suspend_sz) .word . - omap1510_cpu_suspend -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #if defined(CONFIG_ARCH_OMAP16XX) ENTRY(omap1610_cpu_suspend) diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S index 4bea36964a00..66414cc8e6e3 100644 --- a/arch/arm/plat-omap/sram-fn.S +++ b/arch/arm/plat-omap/sram-fn.S @@ -12,7 +12,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/arch/io.h> -#include <asm/arch/hardware.h> +#include <asm/hardware.h> .text diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 7ad69f14a3e7..792f66375830 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,10 +20,13 @@ #include <asm/io.h> #include <asm/cacheflush.h> -#include "sram.h" +#include <asm/arch/sram.h> + +#define OMAP1_SRAM_PA 0x20000000 +#define OMAP1_SRAM_VA 0xd0000000 +#define OMAP2_SRAM_PA 0x40200000 +#define OMAP2_SRAM_VA 0xd0000000 -#define OMAP1_SRAM_BASE 0xd0000000 -#define OMAP1_SRAM_START 0x20000000 #define SRAM_BOOTLOADER_SZ 0x80 static unsigned long omap_sram_base; @@ -31,37 +34,40 @@ static unsigned long omap_sram_size; static unsigned long omap_sram_ceil; /* - * The amount of SRAM depends on the core type: - * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K + * The amount of SRAM depends on the core type. * Note that we cannot try to test for SRAM here because writes * to secure SRAM will hang the system. Also the SRAM is not * yet mapped at this point. */ void __init omap_detect_sram(void) { - omap_sram_base = OMAP1_SRAM_BASE; + if (!cpu_is_omap24xx()) + omap_sram_base = OMAP1_SRAM_VA; + else + omap_sram_base = OMAP2_SRAM_VA; if (cpu_is_omap730()) - omap_sram_size = 0x32000; - else if (cpu_is_omap1510()) - omap_sram_size = 0x80000; + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; + omap_sram_size = 0x4000; /* 16K */ else if (cpu_is_omap1611()) - omap_sram_size = 0x3e800; + omap_sram_size = 0x3e800; /* 250K */ + else if (cpu_is_omap2420()) + omap_sram_size = 0xa0014; /* 640K */ else { printk(KERN_ERR "Could not detect SRAM size\n"); omap_sram_size = 0x4000; } - printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size); omap_sram_ceil = omap_sram_base + omap_sram_size; } static struct map_desc omap_sram_io_desc[] __initdata = { { /* .length gets filled in at runtime */ - .virtual = OMAP1_SRAM_BASE, - .pfn = __phys_to_pfn(OMAP1_SRAM_START), + .virtual = OMAP1_SRAM_VA, + .pfn = __phys_to_pfn(OMAP1_SRAM_PA), .type = MT_DEVICE } }; @@ -76,10 +82,19 @@ void __init omap_map_sram(void) if (omap_sram_size == 0) return; + if (cpu_is_omap24xx()) { + omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA; + omap_sram_io_desc[0].pfn = __phys_to_pfn(OMAP2_SRAM_PA); + } + omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE; omap_sram_io_desc[0].length *= PAGE_SIZE; iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); + printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n", + omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual, + omap_sram_io_desc[0].length); + /* * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... @@ -88,16 +103,6 @@ void __init omap_map_sram(void) omap_sram_size - SRAM_BOOTLOADER_SZ); } -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL; - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - if (_omap_sram_reprogram_clock == NULL) - panic("Cannot use SRAM"); - - return _omap_sram_reprogram_clock(dpllctl, ckctl); -} - void * omap_sram_push(void * start, unsigned long size) { if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { @@ -111,10 +116,94 @@ void * omap_sram_push(void * start, unsigned long size) return (void *)omap_sram_ceil; } -void __init omap_sram_init(void) +static void omap_sram_error(void) +{ + panic("Uninitialized SRAM function\n"); +} + +#ifdef CONFIG_ARCH_OMAP1 + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + if (!_omap_sram_reprogram_clock) + omap_sram_error(); + + return _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap1_sram_init(void) { - omap_detect_sram(); - omap_map_sram(); _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock, sram_reprogram_clock_sz); + + return 0; +} + +#else +#define omap1_sram_init() do {} while (0) +#endif + +#ifdef CONFIG_ARCH_OMAP2 + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + if (!_omap2_sram_ddr_init) + omap_sram_error(); + + return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + if (!_omap2_sram_reprogram_sdrc) + omap_sram_error(); + + return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + if (!_omap2_set_prcm) + omap_sram_error(); + + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +int __init omap2_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc, + sram_reprogram_sdrc_sz); + _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz); + + return 0; +} +#else +#define omap2_sram_init() do {} while (0) +#endif + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap_map_sram(); + + if (!cpu_is_omap24xx()) + omap1_sram_init(); + else + omap2_sram_init(); + + return 0; } diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h deleted file mode 100644 index 71984efa6ae8..000000000000 --- a/arch/arm/plat-omap/sram.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/arch/arm/plat-omap/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -extern void * omap_sram_push(void * start, unsigned long size); -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -/* Do not use these */ -extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long sram_reprogram_clock_sz; - -#endif diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 205e2d0b826d..00afc7a8c2ab 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -91,6 +91,8 @@ EXPORT_SYMBOL(otg_set_transceiver); /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX) + static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -271,6 +273,8 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) return syscon1 << 24; } +#endif + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_USB_GADGET_OMAP) || \ @@ -494,7 +498,7 @@ static inline void omap_otg_init(struct omap_usb_config *config) {} /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX #define ULPD_DPLL_CTRL_REG __REG16(ULPD_DPLL_CTRL) #define DPLL_IOB (1 << 13) @@ -507,7 +511,6 @@ static inline void omap_otg_init(struct omap_usb_config *config) {} static void __init omap_1510_usb_init(struct omap_usb_config *config) { - int status; unsigned int val; omap_usb0_init(config->pins[0], is_usb0_device(config)); @@ -539,6 +542,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) #ifdef CONFIG_USB_GADGET_OMAP if (config->register_dev) { + int status; + udc_device.dev.platform_data = config; status = platform_device_register(&udc_device); if (status) @@ -549,6 +554,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) if (config->register_host) { + int status; + ohci_device.dev.platform_data = config; status = platform_device_register(&ohci_device); if (status) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index ae7c64b8cec3..048c9c19aa4f 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Oct 10 09:46:25 2005 +# Last update: Fri Nov 11 21:55:04 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -460,7 +460,7 @@ esl_sarva MACH_ESL_SARVA ESL_SARVA 443 xm250 MACH_XM250 XM250 444 t6tc1xb MACH_T6TC1XB T6TC1XB 445 ess710 MACH_ESS710 ESS710 446 -mx31ads MACH_MX3ADS MX3ADS 447 +mx31ads MACH_MX31ADS MX31ADS 447 himalaya MACH_HIMALAYA HIMALAYA 448 bolfenk MACH_BOLFENK BOLFENK 449 at91rm9200kr MACH_AT91RM9200KR AT91RM9200KR 450 @@ -802,7 +802,7 @@ cpuat91 MACH_CPUAT91 CPUAT91 787 rea9200 MACH_REA9200 REA9200 788 acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789 ixp425 MACH_IXP425 IXP425 790 -argonplusodyssey MACH_ODYSSEY ODYSSEY 791 +argonplusodyssey MACH_ARGONPLUSODYSSEY ARGONPLUSODYSSEY 791 perch MACH_PERCH PERCH 792 eis05r1 MACH_EIS05R1 EIS05R1 793 pepperpad MACH_PEPPERPAD PEPPERPAD 794 @@ -816,7 +816,7 @@ iq_nextgen_c MACH_IQ_NEXTGEN_C IQ_NEXTGEN_C 801 iq_nextgen_d MACH_IQ_NEXTGEN_D IQ_NEXTGEN_D 802 iq_nextgen_e MACH_IQ_NEXTGEN_E IQ_NEXTGEN_E 803 mallow_at91 MACH_MALLOW_AT91 MALLOW_AT91 804 -cybertracker MACH_CYBERTRACKER CYBERTRACKER 805 +cybertracker_i MACH_CYBERTRACKER_I CYBERTRACKER_I 805 gesbc931x MACH_GESBC931X GESBC931X 806 centipad MACH_CENTIPAD CENTIPAD 807 armsoc MACH_ARMSOC ARMSOC 808 @@ -869,3 +869,38 @@ davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855 tpad MACH_TPAD TPAD 856 roverp3 MACH_ROVERP3 ROVERP3 857 +jornada928 MACH_JORNADA928 JORNADA928 858 +mv88fxx81 MACH_MV88FXX81 MV88FXX81 859 +stmp36xx MACH_STMP36XX STMP36XX 860 +sxni79524 MACH_SXNI79524 SXNI79524 861 +ams_delta MACH_AMS_DELTA AMS_DELTA 862 +uranium MACH_URANIUM URANIUM 863 +ucon MACH_UCON UCON 864 +nas100d MACH_NAS100D NAS100D 865 +l083 MACH_L083_1000 L083_1000 866 +ezx MACH_EZX EZX 867 +pnx5220 MACH_PNX5220 PNX5220 868 +butte MACH_BUTTE BUTTE 869 +srm2 MACH_SRM2 SRM2 870 +dsbr MACH_DSBR DSBR 871 +crystalball MACH_CRYSTALBALL CRYSTALBALL 872 +tinypxa27x MACH_TINYPXA27X TINYPXA27X 873 +herbie MACH_HERBIE HERBIE 874 +magician MACH_MAGICIAN MAGICIAN 875 +cm4002 MACH_CM4002 CM4002 876 +b4 MACH_B4 B4 877 +maui MACH_MAUI MAUI 878 +cybertracker_g MACH_CYBERTRACKER_G CYBERTRACKER_G 879 +nxdkn MACH_NXDKN NXDKN 880 +mio8390 MACH_MIO8390 MIO8390 881 +omi_board MACH_OMI_BOARD OMI_BOARD 882 +mx21civ MACH_MX21CIV MX21CIV 883 +mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884 +xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885 +arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886 +s3c2413 MACH_S3C2413 S3C2413 887 +samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888 +wg302v1 MACH_WG302V1 WG302V1 889 +wg302v2 MACH_WG302V2 WG302V2 890 +eb42x MACH_EB42X EB42X 891 +iq331es MACH_IQ331ES IQ331ES 892 diff --git a/arch/arm26/kernel/process.c b/arch/arm26/kernel/process.c index 9eb9964d32a7..15833a0057dd 100644 --- a/arch/arm26/kernel/process.c +++ b/arch/arm26/kernel/process.c @@ -74,15 +74,13 @@ __setup("hlt", hlt_setup); void cpu_idle(void) { /* endless idle loop with no priority at all */ - preempt_disable(); while (1) { - while (!need_resched()) { - local_irq_disable(); - if (!need_resched() && !hlt_counter) - local_irq_enable(); - } + while (!need_resched()) + cpu_relax(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); } - schedule(); } static char reboot_mode = 'h'; diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c index cf7e977d18c8..4e6b7356a722 100644 --- a/arch/arm26/kernel/ptrace.c +++ b/arch/arm26/kernel/ptrace.c @@ -546,7 +546,7 @@ static int ptrace_setfpregs(struct task_struct *tsk, void *ufp) sizeof(struct user_fp)) ? -EFAULT : 0; } -static int do_ptrace(int request, struct task_struct *child, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { unsigned long tmp; int ret; @@ -665,53 +665,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat return ret; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) -{ - struct task_struct *child; - int ret; - - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret == 0) - ret = do_ptrace(request, child, addr, data); - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - return ret; -} - asmlinkage void syscall_trace(int why, struct pt_regs *regs) { unsigned long ip; diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm index 6f08903f3139..517d1f027fe8 100644 --- a/arch/cris/arch-v10/README.mm +++ b/arch/cris/arch-v10/README.mm @@ -177,7 +177,7 @@ The example address is 0xd004000c; in binary this is: Given the top-level Page Directory, the offset in that directory is calculated using the upper 8 bits: -extern inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) +static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) { return mm->pgd + (address >> PGDIR_SHIFT); } @@ -190,14 +190,14 @@ The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd. Since the Middle Directory does not exist, it is a unity mapping: -extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) +static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) { return (pmd_t *) dir; } The Page Table provides the final lookup by using bits 13 to 23 as index: -extern inline pte_t * pte_offset(pmd_t * dir, unsigned long address) +static inline pte_t * pte_offset(pmd_t * dir, unsigned long address) { return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 201f4c90d961..f2c55742e90c 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -19,7 +19,6 @@ */ #include <linux/config.h> -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 094ff45ae85b..cac05a5e514c 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -112,7 +112,6 @@ #include <asm/rtc.h> #include <linux/config.h> -#include <linux/version.h> #include <asm/arch/svinto.h> #include <asm/fasttimer.h> diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c index 130dd214e41d..6cbd34a27b90 100644 --- a/arch/cris/arch-v10/kernel/ptrace.c +++ b/arch/cris/arch-v10/kernel/ptrace.c @@ -76,55 +76,11 @@ ptrace_disable(struct task_struct *child) * (in user space) where the result of the ptrace call is written (instead of * being returned). */ -asmlinkage int -sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - - if (child) - get_task_struct(child); - - read_unlock(&tasklist_lock); - - if (!child) - goto out; - - ret = -EPERM; - - if (pid == 1) /* Leave the init process alone! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* Read word at location address. */ case PTRACE_PEEKTEXT: @@ -289,10 +245,7 @@ sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c index 693771961f85..19bcad05716f 100644 --- a/arch/cris/arch-v10/kernel/signal.c +++ b/arch/cris/arch-v10/kernel/signal.c @@ -476,7 +476,7 @@ give_sigsegv: * OK, we're invoking a handler */ -extern inline void +static inline void handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index ca72076c630a..501fa52d8d3a 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -277,7 +277,7 @@ struct file_operations cryptocop_fops = { static void free_cdesc(struct cryptocop_dma_desc *cdesc) { DEBUG(printk("free_cdesc: cdesc 0x%p, from_pool=%d\n", cdesc, cdesc->from_pool)); - if (cdesc->free_buf) kfree(cdesc->free_buf); + kfree(cdesc->free_buf); if (cdesc->from_pool) { unsigned long int flags; @@ -2950,15 +2950,15 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig put_page(outpages[i]); } - if (digest_result) kfree(digest_result); - if (inpages) kfree(inpages); - if (outpages) kfree(outpages); + kfree(digest_result); + kfree(inpages); + kfree(outpages); if (cop){ - if (cop->tfrm_op.indata) kfree(cop->tfrm_op.indata); - if (cop->tfrm_op.outdata) kfree(cop->tfrm_op.outdata); + kfree(cop->tfrm_op.indata); + kfree(cop->tfrm_op.outdata); kfree(cop); } - if (jc) kfree(jc); + kfree(jc); DEBUG(print_lock_status()); diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c index fc2a619b035d..93ddea4d9564 100644 --- a/arch/cris/arch-v32/drivers/nandflash.c +++ b/arch/cris/arch-v32/drivers/nandflash.c @@ -14,7 +14,6 @@ * */ -#include <linux/version.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/module.h> diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index f894580b648b..d788bda3578c 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -18,7 +18,6 @@ */ #include <linux/config.h> -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c index 208489da2a87..5528b83a622b 100644 --- a/arch/cris/arch-v32/kernel/ptrace.c +++ b/arch/cris/arch-v32/kernel/ptrace.c @@ -99,55 +99,11 @@ ptrace_disable(struct task_struct *child) } -asmlinkage int -sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - - if (child) - get_task_struct(child); - - read_unlock(&tasklist_lock); - - if (!child) - goto out; - - ret = -EPERM; - - if (pid == 1) /* Leave the init process alone! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* Read word at location address. */ case PTRACE_PEEKTEXT: @@ -347,10 +303,7 @@ sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index 0a3614dab887..99e59b3eacf8 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -513,7 +513,7 @@ give_sigsegv: } /* Invoke a singal handler to, well, handle the signal. */ -extern inline void +static inline void handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 957f551ba5ce..13867f4fad16 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -161,6 +161,7 @@ void __init smp_callin(void) REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask); unmask_irq(IPI_INTR_VECT); unmask_irq(TIMER_INTR_VECT); + preempt_disable(); local_irq_enable(); cpu_set(cpu, cpu_online_map); diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c index 949a0e40e03c..7c80afb10460 100644 --- a/arch/cris/kernel/process.c +++ b/arch/cris/kernel/process.c @@ -218,7 +218,9 @@ void cpu_idle (void) idle = default_idle; idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c index a92ac9877582..1780df3ed9e5 100644 --- a/arch/cris/mm/ioremap.c +++ b/arch/cris/mm/ioremap.c @@ -16,7 +16,7 @@ #include <asm/tlbflush.h> #include <asm/arch/memmap.h> -extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, +static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, unsigned long phys_addr, pgprot_t prot) { unsigned long end; diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c index 1a1e8a119c3d..712c3c24c954 100644 --- a/arch/frv/kernel/pm.c +++ b/arch/frv/kernel/pm.c @@ -14,6 +14,7 @@ #include <linux/config.h> #include <linux/init.h> #include <linux/pm.h> +#include <linux/pm_legacy.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/sysctl.h> diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index 3001b82b1514..54a452136f00 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -77,16 +77,20 @@ void (*idle)(void) = core_sleep_idle; */ void cpu_idle(void) { + int cpu = smp_processor_id(); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) { - irq_stat[smp_processor_id()].idle_timestamp = jiffies; + irq_stat[cpu].idle_timestamp = jiffies; if (!frv_dma_inprogress && idle) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c index cb335a14a315..f953484e7d59 100644 --- a/arch/frv/kernel/ptrace.c +++ b/arch/frv/kernel/ptrace.c @@ -106,48 +106,11 @@ void ptrace_enable(struct task_struct *child) child->thread.frame0->__status |= REG__STATUS_STEP; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; unsigned long tmp; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -351,10 +314,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 27f1fce64ce4..fe21adf3e75e 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -53,22 +53,18 @@ asmlinkage void ret_from_fork(void); #if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM) void default_idle(void) { - while(1) { - if (!need_resched()) { - local_irq_enable(); - __asm__("sleep"); - local_irq_disable(); - } - schedule(); - } + local_irq_disable(); + if (!need_resched()) { + local_irq_enable(); + /* XXX: race here! What if need_resched() gets set now? */ + __asm__("sleep"); + } else + local_irq_enable(); } #else void default_idle(void) { - while(1) { - if (need_resched()) - schedule(); - } + cpu_relax(); } #endif void (*idle)(void) = default_idle; @@ -81,7 +77,13 @@ void (*idle)(void) = default_idle; */ void cpu_idle(void) { - idle(); + while (1) { + while (!need_resched()) + idle(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } void machine_restart(char * __unused) diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c index a569fe4aa284..0ff6f79b0fed 100644 --- a/arch/h8300/kernel/ptrace.c +++ b/arch/h8300/kernel/ptrace.c @@ -57,43 +57,10 @@ void ptrace_disable(struct task_struct *child) h8300_disable_trace(child); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: { @@ -251,10 +218,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index bac0da731ee3..6004bb0795e0 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -699,7 +699,7 @@ depends on PM && !X86_VISWS config APM tristate "APM (Advanced Power Management) BIOS support" - depends on PM + depends on PM && PM_LEGACY ---help--- APM is a BIOS specification for saving power using several different techniques. This is mostly useful for battery powered laptops with @@ -997,8 +997,21 @@ source "drivers/Kconfig" source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/i386/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/i386/Kconfig.debug" source "security/Kconfig" diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index 5228c40a6fb2..c48b424dd640 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -22,16 +22,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index b66c13c0cc0f..f36677241ecd 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -39,17 +39,14 @@ #ifdef CONFIG_X86_64 -static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ -} extern void __init clustered_apic_check(void); -static inline int ioapic_setup_disabled(void) -{ - return 0; -} +extern int gsi_irq_sharing(int gsi); #include <asm/proto.h> +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } + + #else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC @@ -57,6 +54,8 @@ static inline int ioapic_setup_disabled(void) #include <mach_mpparse.h> #endif /* CONFIG_X86_LOCAL_APIC */ +static inline int gsi_irq_sharing(int gsi) { return gsi; } + #endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ @@ -459,7 +458,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) *irq = IO_APIC_VECTOR(gsi); else #endif - *irq = gsi; + *irq = gsi_irq_sharing(gsi); return 0; } @@ -543,7 +542,7 @@ acpi_scan_rsdp(unsigned long start, unsigned long length) * RSDP signature. */ for (offset = 0; offset < length; offset += 16) { - if (strncmp((char *)(start + offset), "RSD PTR ", sig_len)) + if (strncmp((char *)(phys_to_virt(start) + offset), "RSD PTR ", sig_len)) continue; return (start + offset); } diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 7c724ffa08bb..496a2c9909fe 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -559,14 +559,20 @@ void __devinit setup_local_APIC(void) * If Linux enabled the LAPIC against the BIOS default * disable it down before re-entering the BIOS on shutdown. * Otherwise the BIOS may get confused and not power-off. + * Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. */ void lapic_shutdown(void) { - if (!cpu_has_apic || !enabled_via_apicbase) + if (!cpu_has_apic) return; local_irq_disable(); - disable_local_APIC(); + clear_local_APIC(); + + if (enabled_via_apicbase) + disable_local_APIC(); + local_irq_enable(); } diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index d2ef0c2aa93e..1e60acbed3c1 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -218,6 +218,7 @@ #include <linux/time.h> #include <linux/sched.h> #include <linux/pm.h> +#include <linux/pm_legacy.h> #include <linux/device.h> #include <linux/kernel.h> #include <linux/smp.h> @@ -447,8 +448,7 @@ static char * apm_event_name[] = { "system standby resume", "capabilities change" }; -#define NR_APM_EVENT_NAME \ - (sizeof(apm_event_name) / sizeof(apm_event_name[0])) +#define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name) typedef struct lookup_t { int key; @@ -479,7 +479,7 @@ static const lookup_t error_table[] = { { APM_NO_ERROR, "BIOS did not set a return code" }, { APM_NOT_PRESENT, "No APM present" } }; -#define ERROR_COUNT (sizeof(error_table)/sizeof(lookup_t)) +#define ERROR_COUNT ARRAY_SIZE(error_table) /** * apm_error - display an APM error @@ -770,8 +770,26 @@ static int set_system_power_state(u_short state) static int apm_do_idle(void) { u32 eax; + u8 ret = 0; + int idled = 0; + int polling; + + polling = test_thread_flag(TIF_POLLING_NRFLAG); + if (polling) { + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + } + if (!need_resched()) { + idled = 1; + ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax); + } + if (polling) + set_thread_flag(TIF_POLLING_NRFLAG); + + if (!idled) + return 0; - if (apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax)) { + if (ret) { static unsigned long t; /* This always fails on some SMP boards running UP kernels. diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index 53a1681cd964..e344ef88cfcd 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -206,9 +206,9 @@ static void __init init_amd(struct cpuinfo_x86 *c) display_cacheinfo(c); if (cpuid_eax(0x80000000) >= 0x80000008) { - c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; - if (c->x86_num_cores & (c->x86_num_cores - 1)) - c->x86_num_cores = 1; + c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; + if (c->x86_max_cores & (c->x86_max_cores - 1)) + c->x86_max_cores = 1; } #ifdef CONFIG_X86_HT @@ -217,15 +217,15 @@ static void __init init_amd(struct cpuinfo_x86 *c) * distingush the cores. Assumes number of cores is a power * of two. */ - if (c->x86_num_cores > 1) { + if (c->x86_max_cores > 1) { int cpu = smp_processor_id(); unsigned bits = 0; - while ((1 << bits) < c->x86_num_cores) + while ((1 << bits) < c->x86_max_cores) bits++; cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<<bits)-1); phys_proc_id[cpu] >>= bits; printk(KERN_INFO "CPU %d(%d) -> Core %d\n", - cpu, c->x86_num_cores, cpu_core_id[cpu]); + cpu, c->x86_max_cores, cpu_core_id[cpu]); } #endif } diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 74145a33cb0f..31e344b26bae 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -30,8 +30,6 @@ static int disable_x86_serial_nr __devinitdata = 1; struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; -extern void mcheck_init(struct cpuinfo_x86 *c); - extern int disable_pse; static void default_init(struct cpuinfo_x86 * c) @@ -233,10 +231,10 @@ static void __init early_cpu_detect(void) cpuid(0x00000001, &tfms, &misc, &junk, &cap0); c->x86 = (tfms >> 8) & 15; c->x86_model = (tfms >> 4) & 15; - if (c->x86 == 0xf) { + if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xF) << 4; - } c->x86_mask = tfms & 15; if (cap0 & (1<<19)) c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8; @@ -335,7 +333,7 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) c->x86_model = c->x86_mask = 0; /* So far unknown... */ c->x86_vendor_id[0] = '\0'; /* Unset */ c->x86_model_id[0] = '\0'; /* Unset */ - c->x86_num_cores = 1; + c->x86_max_cores = 1; memset(&c->x86_capability, 0, sizeof c->x86_capability); if (!have_cpuid_p()) { @@ -429,9 +427,8 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) } /* Init Machine Check Exception if available. */ -#ifdef CONFIG_X86_MCE mcheck_init(c); -#endif + if (c == &boot_cpu_data) sysenter_setup(); enable_sep_cpu(); @@ -446,52 +443,44 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) void __devinit detect_ht(struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; - int index_msb, tmp; + int index_msb, core_bits; int cpu = smp_processor_id(); + cpuid(1, &eax, &ebx, &ecx, &edx); + + c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); + if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; - cpuid(1, &eax, &ebx, &ecx, &edx); smp_num_siblings = (ebx & 0xff0000) >> 16; if (smp_num_siblings == 1) { printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); } else if (smp_num_siblings > 1 ) { - index_msb = 31; if (smp_num_siblings > NR_CPUS) { printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings); smp_num_siblings = 1; return; } - tmp = smp_num_siblings; - while ((tmp & 0x80000000 ) == 0) { - tmp <<=1 ; - index_msb--; - } - if (smp_num_siblings & (smp_num_siblings - 1)) - index_msb++; + + index_msb = get_count_order(smp_num_siblings); phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb); printk(KERN_INFO "CPU: Physical Processor ID: %d\n", phys_proc_id[cpu]); - smp_num_siblings = smp_num_siblings / c->x86_num_cores; + smp_num_siblings = smp_num_siblings / c->x86_max_cores; - tmp = smp_num_siblings; - index_msb = 31; - while ((tmp & 0x80000000) == 0) { - tmp <<=1 ; - index_msb--; - } + index_msb = get_count_order(smp_num_siblings) ; - if (smp_num_siblings & (smp_num_siblings - 1)) - index_msb++; + core_bits = get_count_order(c->x86_max_cores); - cpu_core_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb); + cpu_core_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) & + ((1 << core_bits) - 1); - if (c->x86_num_cores > 1) + if (c->x86_max_cores > 1) printk(KERN_INFO "CPU: Processor Core ID: %d\n", cpu_core_id[cpu]); } diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index caa9f7711343..871366b83b3f 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -377,10 +377,9 @@ acpi_cpufreq_cpu_init ( arg0.buffer.length = 12; arg0.buffer.pointer = (u8 *) arg0_buf; - data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); + data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); if (!data) return (-ENOMEM); - memset(data, 0, sizeof(struct cpufreq_acpi_io)); acpi_io_data[cpu] = data; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 73a5dc5b26b8..edcd626001da 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -171,10 +171,9 @@ static int get_ranges (unsigned char *pst) unsigned int speed; u8 fid, vid; - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); if (!powernow_table) return -ENOMEM; - memset(powernow_table, 0, (sizeof(struct cpufreq_frequency_table) * (number_scales + 1))); for (j=0 ; j < number_scales; j++) { fid = *pst++; @@ -305,16 +304,13 @@ static int powernow_acpi_init(void) goto err0; } - acpi_processor_perf = kmalloc(sizeof(struct acpi_processor_performance), + acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), GFP_KERNEL); - if (!acpi_processor_perf) { retval = -ENOMEM; goto err0; } - memset(acpi_processor_perf, 0, sizeof(struct acpi_processor_performance)); - if (acpi_processor_register_performance(acpi_processor_perf, 0)) { retval = -EIO; goto err1; @@ -337,14 +333,12 @@ static int powernow_acpi_init(void) goto err2; } - powernow_table = kmalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); + powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); if (!powernow_table) { retval = -ENOMEM; goto err2; } - memset(powernow_table, 0, ((number_scales + 1) * sizeof(struct cpufreq_frequency_table))); - pc.val = (unsigned long) acpi_processor_perf->states[0].control; for (i = 0; i < number_scales; i++) { u8 fid, vid; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 2d5c9adba0cd..68a1fc87f4ca 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -462,7 +462,6 @@ static int check_supported_cpu(unsigned int cpu) oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(cpu)); - schedule(); if (smp_processor_id() != cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", cpu); @@ -497,9 +496,7 @@ static int check_supported_cpu(unsigned int cpu) out: set_cpus_allowed(current, oldmask); - schedule(); return rc; - } static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) @@ -913,7 +910,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); - schedule(); if (smp_processor_id() != pol->cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu); @@ -968,8 +964,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi err_out: set_cpus_allowed(current, oldmask); - schedule(); - return ret; } @@ -991,12 +985,11 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) if (!check_supported_cpu(pol->cpu)) return -ENODEV; - data = kmalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); + data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); if (!data) { printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); return -ENOMEM; } - memset(data,0,sizeof(struct powernow_k8_data)); data->cpu = pol->cpu; @@ -1026,7 +1019,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); - schedule(); if (smp_processor_id() != pol->cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu); @@ -1045,7 +1037,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) /* run on any CPU again */ set_cpus_allowed(current, oldmask); - schedule(); pol->governor = CPUFREQ_DEFAULT_GOVERNOR; pol->cpus = cpu_core_map[pol->cpu]; @@ -1080,7 +1071,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) err_out: set_cpus_allowed(current, oldmask); - schedule(); powernow_k8_cpu_exit_acpi(data); kfree(data); @@ -1116,17 +1106,14 @@ static unsigned int powernowk8_get (unsigned int cpu) set_cpus_allowed(current, oldmask); return 0; } - preempt_disable(); - + if (query_current_values_with_pending_wait(data)) goto out; khz = find_khz_freq_from_fid(data->currfid); - out: - preempt_enable_no_resched(); +out: set_cpus_allowed(current, oldmask); - return khz; } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 1465974256c9..edb9873e27e3 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -67,7 +67,7 @@ static const struct cpu_id cpu_ids[] = { [CPU_MP4HT_D0] = {15, 3, 4 }, [CPU_MP4HT_E0] = {15, 4, 1 }, }; -#define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) +#define N_IDS ARRAY_SIZE(cpu_ids) struct cpu_model { @@ -423,12 +423,11 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) } } - centrino_model[cpu] = kmalloc(sizeof(struct cpu_model), GFP_KERNEL); + centrino_model[cpu] = kzalloc(sizeof(struct cpu_model), GFP_KERNEL); if (!centrino_model[cpu]) { result = -ENOMEM; goto err_unreg; } - memset(centrino_model[cpu], 0, sizeof(struct cpu_model)); centrino_model[cpu]->model_name=NULL; centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000; diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c index 43601de0f633..5e2da704f0fa 100644 --- a/arch/i386/kernel/cpu/intel.c +++ b/arch/i386/kernel/cpu/intel.c @@ -6,6 +6,7 @@ #include <linux/bitops.h> #include <linux/smp.h> #include <linux/thread_info.h> +#include <linux/module.h> #include <asm/processor.h> #include <asm/msr.h> @@ -157,7 +158,7 @@ static void __devinit init_intel(struct cpuinfo_x86 *c) if ( p ) strcpy(c->x86_model_id, p); - c->x86_num_cores = num_cpu_cores(c); + c->x86_max_cores = num_cpu_cores(c); detect_ht(c); @@ -264,5 +265,52 @@ __init int intel_cpu_init(void) return 0; } +#ifndef CONFIG_X86_CMPXCHG +unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) +{ + u8 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u8 *)ptr; + if (prev == old) + *(u8 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u8); + +unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) +{ + u16 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u16 *)ptr; + if (prev == old) + *(u16 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u16); + +unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) +{ + u32 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u32 *)ptr; + if (prev == old) + *(u32 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u32); +#endif + // arch_initcall(intel_cpu_init); diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index 4dc42a189ae5..fbfd374aa336 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -293,29 +293,45 @@ static struct _cpuid4_info *cpuid4_info[NR_CPUS]; #ifdef CONFIG_SMP static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) { - struct _cpuid4_info *this_leaf; + struct _cpuid4_info *this_leaf, *sibling_leaf; unsigned long num_threads_sharing; -#ifdef CONFIG_X86_HT - struct cpuinfo_x86 *c = cpu_data + cpu; -#endif + int index_msb, i; + struct cpuinfo_x86 *c = cpu_data; this_leaf = CPUID4_INFO_IDX(cpu, index); num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing; if (num_threads_sharing == 1) cpu_set(cpu, this_leaf->shared_cpu_map); -#ifdef CONFIG_X86_HT - else if (num_threads_sharing == smp_num_siblings) - this_leaf->shared_cpu_map = cpu_sibling_map[cpu]; - else if (num_threads_sharing == (c->x86_num_cores * smp_num_siblings)) - this_leaf->shared_cpu_map = cpu_core_map[cpu]; - else - printk(KERN_DEBUG "Number of CPUs sharing cache didn't match " - "any known set of CPUs\n"); -#endif + else { + index_msb = get_count_order(num_threads_sharing); + + for_each_online_cpu(i) { + if (c[i].apicid >> index_msb == + c[cpu].apicid >> index_msb) { + cpu_set(i, this_leaf->shared_cpu_map); + if (i != cpu && cpuid4_info[i]) { + sibling_leaf = CPUID4_INFO_IDX(i, index); + cpu_set(cpu, sibling_leaf->shared_cpu_map); + } + } + } + } +} +static void __devinit cache_remove_shared_cpu_map(unsigned int cpu, int index) +{ + struct _cpuid4_info *this_leaf, *sibling_leaf; + int sibling; + + this_leaf = CPUID4_INFO_IDX(cpu, index); + for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) { + sibling_leaf = CPUID4_INFO_IDX(sibling, index); + cpu_clear(cpu, sibling_leaf->shared_cpu_map); + } } #else static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {} +static void __init cache_remove_shared_cpu_map(unsigned int cpu, int index) {} #endif static void free_cache_attributes(unsigned int cpu) @@ -574,8 +590,10 @@ static void __cpuexit cache_remove_dev(struct sys_device * sys_dev) unsigned int cpu = sys_dev->id; unsigned long i; - for (i = 0; i < num_cache_leaves; i++) + for (i = 0; i < num_cache_leaves; i++) { + cache_remove_shared_cpu_map(cpu, i); kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj)); + } kobject_unregister(cache_kobject[cpu]); cpuid4_cache_sysfs_exit(cpu); return; diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c index 7c6b9c73522f..fc5d5215e23d 100644 --- a/arch/i386/kernel/cpu/mcheck/k7.c +++ b/arch/i386/kernel/cpu/mcheck/k7.c @@ -68,7 +68,7 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code) /* AMD K7 machine check is Intel like */ -void __devinit amd_mcheck_init(struct cpuinfo_x86 *c) +void amd_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c index 2cf25d2ba0f1..6170af3c271a 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.c +++ b/arch/i386/kernel/cpu/mcheck/mce.c @@ -16,7 +16,7 @@ #include "mce.h" -int mce_disabled __devinitdata = 0; +int mce_disabled = 0; int nr_mce_banks; EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ @@ -31,7 +31,7 @@ static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_ void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check; /* This has to be run for each processor */ -void __devinit mcheck_init(struct cpuinfo_x86 *c) +void mcheck_init(struct cpuinfo_x86 *c) { if (mce_disabled==1) return; diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index 1d1e885f500a..fd2c459a31ef 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -77,7 +77,7 @@ fastcall void smp_thermal_interrupt(struct pt_regs *regs) } /* P4/Xeon Thermal regulation detect and init */ -static void __devinit intel_init_thermal(struct cpuinfo_x86 *c) +static void intel_init_thermal(struct cpuinfo_x86 *c) { u32 l, h; unsigned int cpu = smp_processor_id(); @@ -231,7 +231,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } -void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c) +void intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c index 3a2e24baddc7..94bc43d950cf 100644 --- a/arch/i386/kernel/cpu/mcheck/p5.c +++ b/arch/i386/kernel/cpu/mcheck/p5.c @@ -28,7 +28,7 @@ static fastcall void pentium_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting for processors with Intel style MCE */ -void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c) +void intel_p5_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c index 979b18bc95c1..deeae42ce199 100644 --- a/arch/i386/kernel/cpu/mcheck/p6.c +++ b/arch/i386/kernel/cpu/mcheck/p6.c @@ -79,7 +79,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } /* Set up machine check reporting for processors with Intel style MCE */ -void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c) +void intel_p6_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c index 5b9d2dd411d3..9e424b6c293d 100644 --- a/arch/i386/kernel/cpu/mcheck/winchip.c +++ b/arch/i386/kernel/cpu/mcheck/winchip.c @@ -22,7 +22,7 @@ static fastcall void winchip_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting on the Winchip C6 series */ -void __devinit winchip_mcheck_init(struct cpuinfo_x86 *c) +void winchip_mcheck_init(struct cpuinfo_x86 *c) { u32 lo, hi; machine_check_vector = winchip_machine_check; diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index dd4ebd6af7e4..1e9db198c440 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -626,6 +626,14 @@ void __init mtrr_bp_init(void) if (cpuid_eax(0x80000000) >= 0x80000008) { u32 phys_addr; phys_addr = cpuid_eax(0x80000008) & 0xff; + /* CPUID workaround for Intel 0F33/0F34 CPU */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_data.x86 == 0xF && + boot_cpu_data.x86_model == 0x3 && + (boot_cpu_data.x86_mask == 0x3 || + boot_cpu_data.x86_mask == 0x4)) + phys_addr = 36; + size_or_mask = ~((1 << (phys_addr - PAGE_SHIFT)) - 1); size_and_mask = ~size_or_mask & 0xfff00000; } else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR && diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 41b871ecf4b3..e7921315ae9d 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -94,12 +94,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (c->x86_cache_size >= 0) seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); #ifdef CONFIG_X86_HT - if (c->x86_num_cores * smp_num_siblings > 1) { + if (c->x86_max_cores * smp_num_siblings > 1) { seq_printf(m, "physical id\t: %d\n", phys_proc_id[n]); - seq_printf(m, "siblings\t: %d\n", - c->x86_num_cores * smp_num_siblings); + seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[n])); seq_printf(m, "core id\t\t: %d\n", cpu_core_id[n]); - seq_printf(m, "cpu cores\t: %d\n", c->x86_num_cores); + seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); } #endif diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c index af809ccf5fbe..0248e084017c 100644 --- a/arch/i386/kernel/crash.c +++ b/arch/i386/kernel/crash.c @@ -21,6 +21,7 @@ #include <asm/hardirq.h> #include <asm/nmi.h> #include <asm/hw_irq.h> +#include <asm/apic.h> #include <mach_ipi.h> @@ -147,6 +148,7 @@ static int crash_nmi_callback(struct pt_regs *regs, int cpu) regs = &fixed_regs; } crash_save_this_cpu(regs, cpu); + disable_local_APIC(); atomic_dec(&waiting_for_crash_ipi); /* Assume hlt works */ halt(); @@ -186,6 +188,7 @@ static void nmi_shootdown_cpus(void) } /* Leave the nmi callback set */ + disable_local_APIC(); } #else static void nmi_shootdown_cpus(void) @@ -210,5 +213,9 @@ void machine_crash_shutdown(struct pt_regs *regs) /* Make a note of crashing cpu. Will be used in NMI callback.*/ crashing_cpu = smp_processor_id(); nmi_shootdown_cpus(); + lapic_shutdown(); +#if defined(CONFIG_X86_IO_APIC) + disable_IO_APIC(); +#endif crash_save_self(regs); } diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 9e24f7b207ee..e50b93155249 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -560,11 +560,10 @@ nmi_stack_fixup: nmi_debug_stack_check: cmpw $__KERNEL_CS,16(%esp) jne nmi_stack_correct - cmpl $debug - 1,(%esp) - jle nmi_stack_correct + cmpl $debug,(%esp) + jb nmi_stack_correct cmpl $debug_esp_fix_insn,(%esp) - jle nmi_debug_stack_fixup -nmi_debug_stack_fixup: + ja nmi_stack_correct FIX_STACK(24,nmi_stack_correct, 1) jmp nmi_stack_correct diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 6345b430b105..32b0c24ab9a6 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -31,22 +31,16 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/preempt.h> #include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/desc.h> -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_old_eflags_prev, kprobe_saved_eflags_prev; -static struct pt_regs jprobe_saved_regs; -static long *jprobe_saved_esp; -/* copy of the kernel stack at the probe fire time */ -static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; void jprobe_return_end(void); +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + /* * returns non-zero if opcode modifies the interrupt flag. */ @@ -91,29 +85,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) { } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_old_eflags_prev = kprobe_old_eflags; - kprobe_saved_eflags_prev = kprobe_saved_eflags; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_eflags = kcb->kprobe_old_eflags; + kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_old_eflags = kprobe_old_eflags_prev; - kprobe_saved_eflags = kprobe_saved_eflags_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_eflags = kcb->prev_kprobe.old_eflags; + kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; - kprobe_saved_eflags = kprobe_old_eflags + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_eflags = kcb->kprobe_old_eflags = (regs->eflags & (TF_MASK | IF_MASK)); if (is_IF_modifier(p->opcode)) - kprobe_saved_eflags &= ~IF_MASK; + kcb->kprobe_saved_eflags &= ~IF_MASK; } static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -127,6 +122,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->eip = (unsigned long)&p->ainsn.insn; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -157,9 +153,15 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) int ret = 0; kprobe_opcode_t *addr = NULL; unsigned long *lp; + struct kprobe_ctlblk *kcb; - /* We're in an interrupt, but this is clear and BUG()-safe. */ + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); + /* Check if the application is using LDT entry for its code segment and * calculate the address by reading the base address from the LDT entry. */ @@ -173,15 +175,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) } /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; - regs->eflags |= kprobe_saved_eflags; - unlock_kprobes(); + regs->eflags |= kcb->kprobe_saved_eflags; goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -190,26 +189,23 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (regs->eflags & VM_MASK) { /* We are in virtual-8086 mode. Return 0 */ goto no_kprobe; @@ -232,8 +228,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p, regs); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -241,7 +237,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -269,9 +265,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -310,14 +307,15 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->eip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. - */ + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ return 1; } @@ -343,7 +341,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; @@ -353,7 +352,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) switch (p->ainsn.insn[0]) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); - *tos |= kprobe_old_eflags; + *tos |= kcb->kprobe_old_eflags; break; case 0xc3: /* ret/lret */ case 0xcb: @@ -394,27 +393,30 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) /* * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. And we hold kprobe lock. + * remain disabled thoroughout this function. */ static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_saved_eflags; + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_eflags; /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -429,18 +431,19 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_old_eflags; + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_old_eflags; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -453,39 +456,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs = *regs; - jprobe_saved_esp = ®s->esp; - addr = (unsigned long)jprobe_saved_esp; + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_esp = ®s->esp; + addr = (unsigned long)(kcb->jprobe_saved_esp); /* * TBD: As Linus pointed out, gcc assumes that the callee @@ -494,7 +499,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) * we also save and restore enough stack bytes to cover * the argument area. */ - memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr)); + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); regs->eflags &= ~IF_MASK; regs->eip = (unsigned long)(jp->entry); return 1; @@ -502,36 +508,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + asm volatile (" xchgl %%ebx,%%esp \n" " int3 \n" " .globl jprobe_return_end \n" " jprobe_return_end: \n" " nop \n"::"b" - (jprobe_saved_esp):"memory"); + (kcb->jprobe_saved_esp):"memory"); } int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->eip - 1); - unsigned long stack_addr = (unsigned long)jprobe_saved_esp; + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_esp); struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if (®s->esp != jprobe_saved_esp) { + if (®s->esp != kcb->jprobe_saved_esp) { struct pt_regs *saved_regs = - container_of(jprobe_saved_esp, struct pt_regs, esp); + container_of(kcb->jprobe_saved_esp, + struct pt_regs, esp); printk("current esp %p does not match saved esp %p\n", - ®s->esp, jprobe_saved_esp); + ®s->esp, kcb->jprobe_saved_esp); printk("Saved registers for jprobe %p\n", jp); show_registers(saved_regs); printk("Current registers\n"); show_registers(regs); BUG(); } - *regs = jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack, + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c index fe1ffa55587d..983f95707e11 100644 --- a/arch/i386/kernel/ldt.c +++ b/arch/i386/kernel/ldt.c @@ -18,6 +18,7 @@ #include <asm/system.h> #include <asm/ldt.h> #include <asm/desc.h> +#include <asm/mmu_context.h> #ifdef CONFIG_SMP /* avoids "defined but not used" warnig */ static void flush_ldt(void *null) diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c index 8600faeea29d..558bb207720f 100644 --- a/arch/i386/kernel/mca.c +++ b/arch/i386/kernel/mca.c @@ -132,7 +132,7 @@ static struct resource mca_standard_resources[] = { { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } }; -#define MCA_STANDARD_RESOURCES (sizeof(mca_standard_resources)/sizeof(struct resource)) +#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) /** * mca_read_and_store_pos - read the POS registers into a memory buffer diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 7a14fdfd3af9..1cb261f225d5 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -99,14 +99,22 @@ EXPORT_SYMBOL(enable_hlt); */ void default_idle(void) { + local_irq_enable(); + if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - local_irq_disable(); - if (!need_resched()) - safe_halt(); - else - local_irq_enable(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + while (!need_resched()) { + local_irq_disable(); + if (!need_resched()) + safe_halt(); + else + local_irq_enable(); + } + set_thread_flag(TIF_POLLING_NRFLAG); } else { - cpu_relax(); + while (!need_resched()) + cpu_relax(); } } #ifdef CONFIG_APM_MODULE @@ -120,29 +128,14 @@ EXPORT_SYMBOL(default_idle); */ static void poll_idle (void) { - int oldval; - local_irq_enable(); - /* - * Deal with another CPU just having chosen a thread to - * run here: - */ - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - asm volatile( - "2:" - "testl %0, %1;" - "rep; nop;" - "je 2b;" - : : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags)); - - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); - } + asm volatile( + "2:" + "testl %0, %1;" + "rep; nop;" + "je 2b;" + : : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags)); } #ifdef CONFIG_HOTPLUG_CPU @@ -179,7 +172,9 @@ static inline void play_dead(void) */ void cpu_idle(void) { - int cpu = raw_smp_processor_id(); + int cpu = smp_processor_id(); + + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while (1) { @@ -201,7 +196,9 @@ void cpu_idle(void) __get_cpu_var(irq_stat).idle_timestamp = jiffies; idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -244,15 +241,12 @@ static void mwait_idle(void) { local_irq_enable(); - if (!need_resched()) { - set_thread_flag(TIF_POLLING_NRFLAG); - do { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - if (need_resched()) - break; - __mwait(0, 0); - } while (!need_resched()); - clear_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (need_resched()) + break; + __mwait(0, 0); } } diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index efd11f09c996..5ffbb4b7ad05 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -354,49 +354,12 @@ ptrace_set_thread_area(struct task_struct *child, return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; struct user * dummy = NULL; int i, ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -663,10 +626,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out_tsk: return ret; } diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c index c9b87330aeea..10e21a4773dd 100644 --- a/arch/i386/kernel/reboot_fixups.c +++ b/arch/i386/kernel/reboot_fixups.c @@ -10,6 +10,7 @@ #include <asm/delay.h> #include <linux/pci.h> +#include <linux/reboot_fixups.h> static void cs5530a_warm_reset(struct pci_dev *dev) { @@ -42,7 +43,7 @@ void mach_reboot_fixups(void) struct pci_dev *dev; int i; - for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) { + for (i=0; i < ARRAY_SIZE(fixups_table); i++) { cur = &(fixups_table[i]); dev = pci_get_device(cur->vendor, cur->device, NULL); if (!dev) diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c index 69e203a0d330..9c968ae67c43 100644 --- a/arch/i386/kernel/scx200.c +++ b/arch/i386/kernel/scx200.c @@ -12,6 +12,7 @@ #include <linux/pci.h> #include <linux/scx200.h> +#include <linux/scx200_gpio.h> /* Verify that the configuration block really is there */ #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index b48ac635f3c1..fdfcb0cba9b4 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -129,9 +129,7 @@ struct drive_info_struct { char dummy[32]; } drive_info; EXPORT_SYMBOL(drive_info); #endif struct screen_info screen_info; -#ifdef CONFIG_VT EXPORT_SYMBOL(screen_info); -#endif struct apm_info apm_info; EXPORT_SYMBOL(apm_info); struct sys_desc_table_struct { diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 01b618e73ecd..d16520da4550 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -68,15 +68,15 @@ EXPORT_SYMBOL(smp_num_siblings); /* Package ID of each logical CPU */ int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; -EXPORT_SYMBOL(phys_proc_id); /* Core ID of each logical CPU */ int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; -EXPORT_SYMBOL(cpu_core_id); +/* representing HT siblings of each logical CPU */ cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_sibling_map); +/* representing HT and core siblings of each logical CPU */ cpumask_t cpu_core_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_core_map); @@ -444,35 +444,60 @@ static void __devinit smp_callin(void) static int cpucount; +/* representing cpus for which sibling maps can be computed */ +static cpumask_t cpu_sibling_setup_map; + static inline void set_cpu_sibling_map(int cpu) { int i; + struct cpuinfo_x86 *c = cpu_data; + + cpu_set(cpu, cpu_sibling_setup_map); if (smp_num_siblings > 1) { - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_isset(i, cpu_callout_map)) - continue; - if (cpu_core_id[cpu] == cpu_core_id[i]) { + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (phys_proc_id[cpu] == phys_proc_id[i] && + cpu_core_id[cpu] == cpu_core_id[i]) { cpu_set(i, cpu_sibling_map[cpu]); cpu_set(cpu, cpu_sibling_map[i]); + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); } } } else { cpu_set(cpu, cpu_sibling_map[cpu]); } - if (current_cpu_data.x86_num_cores > 1) { - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_isset(i, cpu_callout_map)) - continue; - if (phys_proc_id[cpu] == phys_proc_id[i]) { - cpu_set(i, cpu_core_map[cpu]); - cpu_set(cpu, cpu_core_map[i]); - } - } - } else { + if (current_cpu_data.x86_max_cores == 1) { cpu_core_map[cpu] = cpu_sibling_map[cpu]; + c[cpu].booted_cores = 1; + return; + } + + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (phys_proc_id[cpu] == phys_proc_id[i]) { + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + /* + * Does this new cpu bringup a new core? + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) { + /* + * for each core in package, increment + * the booted_cores for this new cpu + */ + if (first_cpu(cpu_sibling_map[i]) == i) + c[cpu].booted_cores++; + /* + * increment the core count for all + * the other cpus in this package + */ + if (i != cpu) + c[i].booted_cores++; + } else if (i != cpu && !c[cpu].booted_cores) + c[cpu].booted_cores = c[i].booted_cores; + } } } @@ -487,6 +512,7 @@ static void __devinit start_secondary(void *unused) * things done here to the most necessary things. */ cpu_init(); + preempt_disable(); smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) rep_nop(); @@ -612,7 +638,7 @@ static inline void __inquire_remote_apic(int apicid) printk("Inquiring remote APIC #%d...\n", apicid); - for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) { + for (i = 0; i < ARRAY_SIZE(regs); i++) { printk("... APIC #%d %s: ", apicid, names[i]); /* @@ -1096,11 +1122,8 @@ static void __init smp_boot_cpus(unsigned int max_cpus) current_thread_info()->cpu = 0; smp_tune_scheduling(); - cpus_clear(cpu_sibling_map[0]); - cpu_set(0, cpu_sibling_map[0]); - cpus_clear(cpu_core_map[0]); - cpu_set(0, cpu_core_map[0]); + set_cpu_sibling_map(0); /* * If we couldn't find an SMP configuration at boot time, @@ -1279,15 +1302,24 @@ static void remove_siblinginfo(int cpu) { int sibling; + struct cpuinfo_x86 *c = cpu_data; + for_each_cpu_mask(sibling, cpu_core_map[cpu]) { + cpu_clear(cpu, cpu_core_map[sibling]); + /* + * last thread sibling in this cpu core going down + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) + c[sibling].booted_cores--; + } + for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) cpu_clear(cpu, cpu_sibling_map[sibling]); - for_each_cpu_mask(sibling, cpu_core_map[cpu]) - cpu_clear(cpu, cpu_core_map[sibling]); cpus_clear(cpu_sibling_map[cpu]); cpus_clear(cpu_core_map[cpu]); phys_proc_id[cpu] = BAD_APICID; cpu_core_id[cpu] = BAD_APICID; + cpu_clear(cpu, cpu_sibling_setup_map); } int __cpu_disable(void) diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c index 8de658db8146..52b3ed5d2cb5 100644 --- a/arch/i386/kernel/srat.c +++ b/arch/i386/kernel/srat.c @@ -137,8 +137,8 @@ static void __init parse_memory_affinity_structure (char *sratp) "enabled and removable" : "enabled" ) ); } -#if MAX_NR_ZONES != 3 -#error "MAX_NR_ZONES != 3, chunk_to_zone requires review" +#if MAX_NR_ZONES != 4 +#error "MAX_NR_ZONES != 4, chunk_to_zone requires review" #endif /* Take a chunk of pages from page frame cstart to cend and count the number * of pages in each zone, returned via zones[]. diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c index e42e46d35159..b9b6bd56b9ba 100644 --- a/arch/i386/kernel/timers/timer_pit.c +++ b/arch/i386/kernel/timers/timer_pit.c @@ -25,8 +25,9 @@ static int __init init_pit(char* override) { /* check clock override */ if (override[0] && strncmp(override,"pit",3)) - printk(KERN_ERR "Warning: clock= override failed. Defaulting to PIT\n"); - + printk(KERN_ERR "Warning: clock= override failed. Defaulting " + "to PIT\n"); + init_cpu_khz(); count_p = LATCH; return 0; } diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 542d9298da5e..06e26f006238 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -28,6 +28,7 @@ #include <linux/proc_fs.h> #include <linux/efi.h> #include <linux/memory_hotplug.h> +#include <linux/initrd.h> #include <asm/processor.h> #include <asm/system.h> @@ -267,7 +268,7 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base) pkmap_page_table = pte; } -void __devinit free_new_highpage(struct page *page) +static void __devinit free_new_highpage(struct page *page) { set_page_count(page, 1); __free_page(page); diff --git a/arch/i386/oprofile/Kconfig b/arch/i386/oprofile/Kconfig index 5ade19801b97..d8a84088471a 100644 --- a/arch/i386/oprofile/Kconfig +++ b/arch/i386/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index 3984226a8b98..eeb1b1f2d548 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -433,9 +433,8 @@ static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) return; /* only applies to certain Toshibas (so far) */ /* Restore config space on Toshiba laptops */ - mdelay(10); pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); - pci_write_config_word(dev, PCI_INTERRUPT_LINE, dev->irq); + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq); pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, pci_resource_start(dev, 0)); pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c index 1f1572692e0b..50a0bef8c85f 100644 --- a/arch/i386/power/cpu.c +++ b/arch/i386/power/cpu.c @@ -118,6 +118,7 @@ void __restore_processor_state(struct saved_context *ctxt) fix_processor_context(); do_fpu_end(); mtrr_ap_init(); + mcheck_init(&boot_cpu_data); } void restore_processor_state(void) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 3b4248cff9a7..b76ce1fe2e7f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -58,6 +58,10 @@ config IA64_UNCACHED_ALLOCATOR bool select GENERIC_ALLOCATOR +config ZONE_DMA_IS_DMA32 + bool + default y + choice prompt "System type" default IA64_GENERIC @@ -164,6 +168,19 @@ config IA64_PAGE_SIZE_64KB endchoice +choice + prompt "Page Table Levels" + default PGTABLE_3 + +config PGTABLE_3 + bool "3 Levels" + +config PGTABLE_4 + depends on !IA64_PAGE_SIZE_64KB + bool "4 Levels" + +endchoice + source kernel/Kconfig.hz config IA64_BRL_EMU @@ -191,6 +208,7 @@ config IOSAPIC config IA64_SGI_SN_XP tristate "Support communication between SGI SSIs" + depends on IA64_GENERIC || IA64_SGI_SN2 select IA64_UNCACHED_ALLOCATOR help An SGI machine can be divided into multiple Single System @@ -426,8 +444,21 @@ config GENERIC_PENDING_IRQ source "arch/ia64/hp/sim/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/ia64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/ia64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug index fda67ac993d7..de9d507ba0fd 100644 --- a/arch/ia64/Kconfig.debug +++ b/arch/ia64/Kconfig.debug @@ -2,17 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - - choice prompt "Physical memory granularity" default IA64_GRANULE_64MB diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 08112ab38468..87cfd31a4a39 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -80,6 +80,8 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_PGTABLE_3 is not set +CONFIG_PGTABLE_4=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 6e3f147e03e5..275a26c6e5aa 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -82,6 +82,8 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index b42ec37be51c..19ee635eeb70 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -642,10 +642,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp) info->event = 0; info->tty = 0; if (info->blocked_open) { - if (info->close_delay) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(info->close_delay); - } + if (info->close_delay) + schedule_timeout_interruptible(info->close_delay); wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); diff --git a/arch/ia64/ia32/ia32_ioctl.c b/arch/ia64/ia32/ia32_ioctl.c index 164b211f4174..88739394f6df 100644 --- a/arch/ia64/ia32/ia32_ioctl.c +++ b/arch/ia64/ia32/ia32_ioctl.c @@ -29,10 +29,8 @@ #define CODE #include "compat_ioctl.c" -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index f72ea6aebcb1..a3aa45cbcfa0 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -987,7 +987,7 @@ efi_initialize_iomem_resources(struct resource *code_resource, break; } - if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) { + if ((res = kzalloc(sizeof(struct resource), GFP_KERNEL)) == NULL) { printk(KERN_ERR "failed to alocate resource for iomem\n"); return; } diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index c13ca0d49c4a..e06f21f60dc5 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -114,7 +114,7 @@ ENTRY(vhpt_miss) shl r21=r16,3 // shift bit 60 into sign bit shr.u r17=r16,61 // get the region number into r17 ;; - shr r22=r21,3 + shr.u r22=r21,3 #ifdef CONFIG_HUGETLB_PAGE extr.u r26=r25,2,6 ;; @@ -140,20 +140,34 @@ ENTRY(vhpt_miss) (p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 (p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) cmp.eq p7,p6=0,r21 // unused address bits all zeroes? - shr.u r18=r22,PMD_SHIFT // shift L2 index into position +#ifdef CONFIG_PGTABLE_4 + shr.u r28=r22,PUD_SHIFT // shift L2 index into position +#else + shr.u r18=r22,PMD_SHIFT // shift L3 index into position +#endif ;; ld8 r17=[r17] // fetch the L1 entry (may be 0) ;; (p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry +#ifdef CONFIG_PGTABLE_4 + dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry + ;; + shr.u r18=r22,PMD_SHIFT // shift L3 index into position +(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0) ;; -(p7) ld8 r20=[r17] // fetch the L2 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L3 index into position +(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL? + dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +#else + dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +#endif ;; -(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L2 entry NULL? - dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift L4 index into position ;; -(p7) ld8 r18=[r21] // read the L3 PTE +(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL? + dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry + ;; +(p7) ld8 r18=[r21] // read the L4 PTE mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss ;; (p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared? @@ -192,14 +206,21 @@ ENTRY(vhpt_miss) * between reading the pagetable and the "itc". If so, flush the entry we * inserted and retry. */ - ld8 r25=[r21] // read L3 PTE again - ld8 r26=[r17] // read L2 entry again + ld8 r25=[r21] // read L4 entry again + ld8 r26=[r17] // read L3 PTE again +#ifdef CONFIG_PGTABLE_4 + ld8 r18=[r28] // read L2 entry again +#endif + cmp.ne p6,p7=r0,r0 ;; - cmp.ne p6,p7=r26,r20 // did L2 entry change + cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change +#ifdef CONFIG_PGTABLE_4 + cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change +#endif mov r27=PAGE_SHIFT<<2 ;; (p6) ptc.l r22,r27 // purge PTE page translation -(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L3 PTE change +(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change ;; (p6) ptc.l r16,r27 // purge translation #endif @@ -432,18 +453,30 @@ ENTRY(nested_dtlb_miss) (p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 (p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) cmp.eq p7,p6=0,r21 // unused address bits all zeroes? - shr.u r18=r22,PMD_SHIFT // shift L2 index into position +#ifdef CONFIG_PGTABLE_4 + shr.u r18=r22,PUD_SHIFT // shift L2 index into position +#else + shr.u r18=r22,PMD_SHIFT // shift L3 index into position +#endif ;; ld8 r17=[r17] // fetch the L1 entry (may be 0) ;; (p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry ;; +#ifdef CONFIG_PGTABLE_4 (p7) ld8 r17=[r17] // fetch the L2 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L3 index into position + shr.u r18=r22,PMD_SHIFT // shift L3 index into position ;; (p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL? - dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry + dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry + ;; +#endif +(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift L4 index into position + ;; +(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL? + dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry (p6) br.cond.spnt page_fault mov b0=r30 br.sptk.many b0 // return to continuation point diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 471086b808a4..801eeaeaf3de 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -26,7 +26,6 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/preempt.h> @@ -38,13 +37,8 @@ extern void jprobe_inst_return(void); -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 - -static struct kprobe *current_kprobe, *kprobe_prev; -static unsigned long kprobe_status, kprobe_status_prev; -static struct pt_regs jprobe_saved_regs; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); enum instruction_type {A, I, M, F, B, L, X, u}; static enum instruction_type bundle_encoding[32][3] = { @@ -313,21 +307,22 @@ static int __kprobes valid_kprobe_addr(int template, int slot, return 0; } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; } -static inline void set_current_kprobe(struct kprobe *p) +static inline void set_current_kprobe(struct kprobe *p, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; + __get_cpu_var(current_kprobe) = p; } static void kretprobe_trampoline(void) @@ -347,11 +342,12 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address = ((struct fnptr *)kretprobe_trampoline)->ip; - head = kretprobe_inst_table_head(current); + spin_lock_irqsave(&kretprobe_lock, flags); + head = kretprobe_inst_table_head(current); /* * It is possible to have multiple instances associated with a given @@ -367,9 +363,9 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * kretprobe_trampoline */ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { - if (ri->task != current) + if (ri->task != current) /* another task is sharing our hash bucket */ - continue; + continue; if (ri->rp && ri->rp->handler) ri->rp->handler(ri, regs); @@ -389,17 +385,19 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->cr_iip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. - */ - return 1; + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ + return 1; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -606,17 +604,22 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) int ret = 0; struct pt_regs *regs = args->regs; kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs); + struct kprobe_ctlblk *kcb; + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Handle recursion cases */ if (kprobe_running()) { p = get_kprobe(addr); if (p) { - if ( (kprobe_status == KPROBE_HIT_SS) && + if ((kcb->kprobe_status == KPROBE_HIT_SS) && (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) { ia64_psr(regs)->ss = 0; - unlock_kprobes(); goto no_kprobe; } /* We have reentered the pre_kprobe_handler(), since @@ -625,17 +628,17 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p); + save_previous_kprobe(kcb); + set_current_kprobe(p, kcb); p->nmissed++; prepare_ss(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else if (args->err == __IA64_BREAK_JPROBE) { /* * jprobe instrumented function just completed */ - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } @@ -645,10 +648,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) } } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (!is_ia64_break_inst(regs)) { /* * The breakpoint instruction was removed right @@ -665,8 +666,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p); + set_current_kprobe(p, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* @@ -678,7 +679,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) ss_probe: prepare_ss(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -688,23 +689,25 @@ no_kprobe: static int __kprobes post_kprobes_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); + resume_execution(cur, regs); /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -713,16 +716,15 @@ out: static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) { - if (!kprobe_running()) - return 0; + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (current_kprobe->fault_handler && - current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - unlock_kprobes(); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); + reset_current_kprobe(); preempt_enable_no_resched(); } @@ -733,31 +735,42 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch(val) { case DIE_BREAK: - if (pre_kprobes_handler(args)) - return NOTIFY_STOP; + /* err is break number from ia64_bad_break() */ + if (args->err == 0x80200 || args->err == 0x80300) + if (pre_kprobes_handler(args)) + ret = NOTIFY_STOP; break; - case DIE_SS: - if (post_kprobes_handler(args->regs)) - return NOTIFY_STOP; + case DIE_FAULT: + /* err is vector number from ia64_fault() */ + if (args->err == 36) + if (post_kprobes_handler(args->regs)) + ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: - if (kprobes_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && + kprobes_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr = ((struct fnptr *)(jp->entry))->ip; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); /* save architectural state */ - jprobe_saved_regs = *regs; + kcb->jprobe_saved_regs = *regs; /* after rfi, execute the jprobe instrumented function */ regs->cr_iip = addr & ~0xFULL; @@ -775,7 +788,10 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { - *regs = jprobe_saved_regs; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + *regs = kcb->jprobe_saved_regs; + preempt_enable_no_resched(); return 1; } diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 52c47da17246..355af15287c7 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -51,6 +51,9 @@ * * 2005-08-12 Keith Owens <kaos@sgi.com> * Convert MCA/INIT handlers to use per event stacks and SAL/OS state. + * + * 2005-10-07 Keith Owens <kaos@sgi.com> + * Add notify_die() hooks. */ #include <linux/config.h> #include <linux/types.h> @@ -58,7 +61,6 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/kallsyms.h> #include <linux/smp_lock.h> #include <linux/bootmem.h> #include <linux/acpi.h> @@ -69,6 +71,7 @@ #include <linux/workqueue.h> #include <asm/delay.h> +#include <asm/kdebug.h> #include <asm/machvec.h> #include <asm/meminit.h> #include <asm/page.h> @@ -132,6 +135,14 @@ extern void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe); static int mca_init; + +static void inline +ia64_mca_spin(const char *func) +{ + printk(KERN_EMERG "%s: spinning here, not returning to SAL\n", func); + while (1) + cpu_relax(); +} /* * IA64_MCA log support */ @@ -526,13 +537,16 @@ ia64_mca_wakeup_all(void) * Outputs : None */ static irqreturn_t -ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs) +ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *regs) { unsigned long flags; int cpu = smp_processor_id(); /* Mask all interrupts */ local_irq_save(flags); + if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_DONE; /* Register with the SAL monarch that the slave has @@ -540,10 +554,18 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs) */ ia64_sal_mc_rendez(); + if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + /* Wait for the monarch cpu to exit. */ while (monarch_cpu != -1) cpu_relax(); /* spin until monarch leaves */ + if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + /* Enable all interrupts */ local_irq_restore(flags); return IRQ_HANDLED; @@ -933,6 +955,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); monarch_cpu = cpu; + if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); ia64_wait_for_slaves(cpu); /* Wakeup all the processors which are spinning in the rendezvous loop. @@ -942,6 +967,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, * spinning in SAL does not work. */ ia64_mca_wakeup_all(); + if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); /* Get the MCA error record and log it */ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA); @@ -960,6 +988,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA); sos->os_status = IA64_MCA_CORRECTED; } + if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, 0, 0, recover) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); set_curr_task(cpu, previous_current); monarch_cpu = -1; @@ -1188,6 +1219,37 @@ ia64_mca_cpe_poll (unsigned long dummy) #endif /* CONFIG_ACPI */ +static int +default_monarch_init_process(struct notifier_block *self, unsigned long val, void *data) +{ + int c; + struct task_struct *g, *t; + if (val != DIE_INIT_MONARCH_PROCESS) + return NOTIFY_DONE; + printk(KERN_ERR "Processes interrupted by INIT -"); + for_each_online_cpu(c) { + struct ia64_sal_os_state *s; + t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET); + s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET); + g = s->prev_task; + if (g) { + if (g->pid) + printk(" %d", g->pid); + else + printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); + } + } + printk("\n\n"); + if (read_trylock(&tasklist_lock)) { + do_each_thread (g, t) { + printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); + show_stack(t, NULL); + } while_each_thread (g, t); + read_unlock(&tasklist_lock); + } + return NOTIFY_DONE; +} + /* * C portion of the OS INIT handler * @@ -1212,8 +1274,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, static atomic_t slaves; static atomic_t monarchs; task_t *previous_current; - int cpu = smp_processor_id(), c; - struct task_struct *g, *t; + int cpu = smp_processor_id(); oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ console_loglevel = 15; /* make sure printks make it to console */ @@ -1253,8 +1314,17 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT; while (monarch_cpu == -1) cpu_relax(); /* spin until monarch enters */ + if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); while (monarch_cpu != -1) cpu_relax(); /* spin until monarch leaves */ + if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); printk("Slave on cpu %d returning to normal service.\n", cpu); set_curr_task(cpu, previous_current); ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; @@ -1263,6 +1333,9 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, } monarch_cpu = cpu; + if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); /* * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be @@ -1273,27 +1346,16 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, printk("Delaying for 5 seconds...\n"); udelay(5*1000000); ia64_wait_for_slaves(cpu); - printk(KERN_ERR "Processes interrupted by INIT -"); - for_each_online_cpu(c) { - struct ia64_sal_os_state *s; - t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET); - s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET); - g = s->prev_task; - if (g) { - if (g->pid) - printk(" %d", g->pid); - else - printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); - } - } - printk("\n\n"); - if (read_trylock(&tasklist_lock)) { - do_each_thread (g, t) { - printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); - show_stack(t, NULL); - } while_each_thread (g, t); - read_unlock(&tasklist_lock); - } + /* If nobody intercepts DIE_INIT_MONARCH_PROCESS then we drop through + * to default_monarch_init_process() above and just print all the + * tasks. + */ + if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu); atomic_dec(&monarchs); set_curr_task(cpu, previous_current); @@ -1462,6 +1524,10 @@ ia64_mca_init(void) s64 rc; struct ia64_sal_retval isrv; u64 timeout = IA64_MCA_RENDEZ_TIMEOUT; /* platform specific */ + static struct notifier_block default_init_monarch_nb = { + .notifier_call = default_monarch_init_process, + .priority = 0/* we need to notified last */ + }; IA64_MCA_DEBUG("%s: begin\n", __FUNCTION__); @@ -1555,6 +1621,10 @@ ia64_mca_init(void) "(status %ld)\n", rc); return; } + if (register_die_notifier(&default_init_monarch_nb)) { + printk(KERN_ERR "Failed to register default monarch INIT process\n"); + return; + } IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __FUNCTION__); diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index f081c60ab206..3492e3211a44 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -88,7 +88,7 @@ mca_page_isolate(unsigned long paddr) if (!ia64_phys_addr_valid(paddr)) return ISOLATE_NONE; - if (!pfn_valid(paddr)) + if (!pfn_valid(paddr >> PAGE_SHIFT)) return ISOLATE_NONE; /* convert physical address to physical page number */ @@ -108,6 +108,7 @@ mca_page_isolate(unsigned long paddr) return ISOLATE_NG; /* add attribute 'Reserved' and register the page */ + get_page(p); SetPageReserved(p); page_isolate[num_page_isolate++] = p; @@ -546,9 +547,20 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, (pal_processor_state_info_t*)peidx_psp(peidx); /* - * We cannot recover errors with other than bus_check. + * Processor recovery status must key off of the PAL recovery + * status in the Processor State Parameter. */ - if (psp->cc || psp->rc || psp->uc) + + /* + * The machine check is corrected. + */ + if (psp->cm == 1) + return 1; + + /* + * The error was not contained. Software must be reset. + */ + if (psp->us || psp->ci == 0) return 0; /* @@ -569,8 +581,6 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, return 0; if (pbci->eb && pbci->bsi > 0) return 0; - if (psp->ci == 0) - return 0; /* * This is a local MCA and estimated as recoverble external bus error. diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f7dfc107cb7b..410d4804fa6e 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -4940,7 +4940,7 @@ abort_locked: if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT; error_args: - if (args_k) kfree(args_k); + kfree(args_k); DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret)); diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 051e050359e4..4305d2ba76f6 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -4,6 +4,9 @@ * Copyright (C) 1998-2003 Hewlett-Packard Co * David Mosberger-Tang <davidm@hpl.hp.com> * 04/11/17 Ashok Raj <ashok.raj@intel.com> Added CPU Hotplug Support + * + * 2005-10-07 Keith Owens <kaos@sgi.com> + * Add notify_die() hooks. */ #define __KERNEL_SYSCALLS__ /* see <asm/unistd.h> */ #include <linux/config.h> @@ -34,6 +37,7 @@ #include <asm/elf.h> #include <asm/ia32.h> #include <asm/irq.h> +#include <asm/kdebug.h> #include <asm/pgalloc.h> #include <asm/processor.h> #include <asm/sal.h> @@ -197,11 +201,12 @@ void default_idle (void) { local_irq_enable(); - while (!need_resched()) + while (!need_resched()) { if (can_do_pal_halt) safe_halt(); else cpu_relax(); + } } #ifdef CONFIG_HOTPLUG_CPU @@ -263,16 +268,20 @@ void __attribute__((noreturn)) cpu_idle (void) { void (*mark_idle)(int) = ia64_mark_idle; + int cpu = smp_processor_id(); /* endless idle loop with no priority at all */ while (1) { + if (can_do_pal_halt) + clear_thread_flag(TIF_POLLING_NRFLAG); + else + set_thread_flag(TIF_POLLING_NRFLAG); + + if (!need_resched()) { + void (*idle)(void); #ifdef CONFIG_SMP - if (!need_resched()) min_xtp(); #endif - while (!need_resched()) { - void (*idle)(void); - if (__get_cpu_var(cpu_idle_state)) __get_cpu_var(cpu_idle_state) = 0; @@ -284,17 +293,17 @@ cpu_idle (void) if (!idle) idle = default_idle; (*idle)(); - } - - if (mark_idle) - (*mark_idle)(0); - + if (mark_idle) + (*mark_idle)(0); #ifdef CONFIG_SMP - normal_xtp(); + normal_xtp(); #endif + } + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); - if (cpu_is_offline(smp_processor_id())) + if (cpu_is_offline(cpu)) play_dead(); } } @@ -804,12 +813,14 @@ cpu_halt (void) void machine_restart (char *restart_cmd) { + (void) notify_die(DIE_MACHINE_RESTART, restart_cmd, NULL, 0, 0, 0); (*efi.reset_system)(EFI_RESET_WARM, 0, 0, NULL); } void machine_halt (void) { + (void) notify_die(DIE_MACHINE_HALT, "", NULL, 0, 0, 0); cpu_halt(); } diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index fc56ca2da358..5add0bcf87a7 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -92,6 +92,13 @@ extern void efi_initialize_iomem_resources(struct resource *, extern char _text[], _end[], _etext[]; unsigned long ia64_max_cacheline_size; + +int dma_get_cache_alignment(void) +{ + return ia64_max_cacheline_size; +} +EXPORT_SYMBOL(dma_get_cache_alignment); + unsigned long ia64_iobase; /* virtual address for I/O accesses */ EXPORT_SYMBOL(ia64_iobase); struct io_space io_space[MAX_IO_SPACES]; @@ -454,6 +461,7 @@ setup_arch (char **cmdline_p) #endif cpu_init(); /* initialize the bootstrap CPU */ + mmu_context_init(); /* initialize context_id bitmap */ #ifdef CONFIG_ACPI acpi_boot_init(); diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 774f34b675cf..58ce07efc56e 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -387,15 +387,14 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct sigscratch *scr) { extern char __kernel_sigtramp[]; - unsigned long tramp_addr, new_rbs = 0; + unsigned long tramp_addr, new_rbs = 0, new_sp; struct sigframe __user *frame; long err; - frame = (void __user *) scr->pt.r12; + new_sp = scr->pt.r12; tramp_addr = (unsigned long) __kernel_sigtramp; - if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags((unsigned long) frame) == 0) { - frame = (void __user *) ((current->sas_ss_sp + current->sas_ss_size) - & ~(STACK_ALIGN - 1)); + if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) { + new_sp = current->sas_ss_sp + current->sas_ss_size; /* * We need to check for the register stack being on the signal stack * separately, because it's switched separately (memory stack is switched @@ -404,7 +403,7 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, if (!rbs_on_sig_stack(scr->pt.ar_bspstore)) new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1); } - frame = (void __user *) frame - ((sizeof(*frame) + STACK_ALIGN - 1) & ~(STACK_ALIGN - 1)); + frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) return force_sigsegv_info(sig, frame); diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 400a48987124..8f44e7d2df66 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -399,6 +399,7 @@ start_secondary (void *unused) Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id()); efi_map_pal_code(); cpu_init(); + preempt_disable(); smp_callin(); cpu_idle(); diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index f970359e7edf..fba5fdd1f968 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -30,17 +30,20 @@ fpswa_interface_t *fpswa_interface; EXPORT_SYMBOL(fpswa_interface); struct notifier_block *ia64die_chain; -static DEFINE_SPINLOCK(die_notifier_lock); -int register_die_notifier(struct notifier_block *nb) +int +register_die_notifier(struct notifier_block *nb) { - int err = 0; - unsigned long flags; - spin_lock_irqsave(&die_notifier_lock, flags); - err = notifier_chain_register(&ia64die_chain, nb); - spin_unlock_irqrestore(&die_notifier_lock, flags); - return err; + return notifier_chain_register(&ia64die_chain, nb); } +EXPORT_SYMBOL_GPL(register_die_notifier); + +int +unregister_die_notifier(struct notifier_block *nb) +{ + return notifier_chain_unregister(&ia64die_chain, nb); +} +EXPORT_SYMBOL_GPL(unregister_die_notifier); void __init trap_init (void) @@ -105,6 +108,7 @@ die (const char *str, struct pt_regs *regs, long err) if (++die.lock_owner_depth < 3) { printk("%s[%d]: %s %ld [%d]\n", current->comm, current->pid, str, err, ++die_counter); + (void) notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV); show_regs(regs); } else printk(KERN_ERR "Recursive die() failure, output suppressed\n"); @@ -155,9 +159,8 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) switch (break_num) { case 0: /* unknown error (used by GCC for __builtin_abort()) */ if (notify_die(DIE_BREAK, "break 0", regs, break_num, TRAP_BRKPT, SIGTRAP) - == NOTIFY_STOP) { + == NOTIFY_STOP) return; - } die_if_kernel("bugcheck!", regs, break_num); sig = SIGILL; code = ILL_ILLOPC; break; @@ -210,15 +213,6 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) sig = SIGILL; code = __ILL_BNDMOD; break; - case 0x80200: - case 0x80300: - if (notify_die(DIE_BREAK, "kprobe", regs, break_num, TRAP_BRKPT, SIGTRAP) - == NOTIFY_STOP) { - return; - } - sig = SIGTRAP; code = TRAP_BRKPT; - break; - default: if (break_num < 0x40000 || break_num > 0x100000) die_if_kernel("Bad break", regs, break_num); @@ -226,6 +220,9 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) if (break_num < 0x80000) { sig = SIGILL; code = __ILL_BREAK; } else { + if (notify_die(DIE_BREAK, "bad break", regs, break_num, TRAP_BRKPT, SIGTRAP) + == NOTIFY_STOP) + return; sig = SIGTRAP; code = TRAP_BRKPT; } } @@ -578,12 +575,11 @@ ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa, #endif break; case 35: siginfo.si_code = TRAP_BRANCH; ifa = 0; break; - case 36: - if (notify_die(DIE_SS, "ss", ®s, vector, - vector, SIGTRAP) == NOTIFY_STOP) - return; - siginfo.si_code = TRAP_TRACE; ifa = 0; break; + case 36: siginfo.si_code = TRAP_TRACE; ifa = 0; break; } + if (notify_die(DIE_FAULT, "ia64_fault", ®s, vector, siginfo.si_code, SIGTRAP) + == NOTIFY_STOP) + return; siginfo.si_signo = SIGTRAP; siginfo.si_errno = 0; siginfo.si_addr = (void __user *) ifa; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index a88cdb7232f8..0f776b032d31 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -350,14 +350,12 @@ static void __init initialize_pernode_data(void) * for best. * @nid: node id * @pernodesize: size of this node's pernode data - * @align: alignment to use for this node's pernode data */ -static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize, - unsigned long align) +static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize) { void *ptr = NULL; u8 best = 0xff; - int bestnode = -1, node; + int bestnode = -1, node, anynode = 0; for_each_online_node(node) { if (node_isset(node, memory_less_mask)) @@ -366,13 +364,15 @@ static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize, best = node_distance(nid, node); bestnode = node; } + anynode = node; } - ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat, - pernodesize, align, __pa(MAX_DMA_ADDRESS)); + if (bestnode == -1) + bestnode = anynode; + + ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat, pernodesize, + PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); - if (!ptr) - panic("NO memory for memory less node\n"); return ptr; } @@ -413,8 +413,7 @@ static void __init memory_less_nodes(void) for_each_node_mask(node, memory_less_mask) { pernodesize = compute_pernodesize(node); - pernode = memory_less_node_alloc(node, pernodesize, - (node) ? (node * PERCPU_PAGE_SIZE) : (1024*1024)); + pernode = memory_less_node_alloc(node, pernodesize); fill_pernode(node, __pa(pernode), pernodesize); } diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index c79a9b96d02b..41105d454423 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -8,6 +8,8 @@ * Modified RID allocation for SMP * Goutham Rao <goutham.rao@intel.com> * IPI based ptc implementation and A-step IPI implementation. + * Rohit Seth <rohit.seth@intel.com> + * Ken Chen <kenneth.w.chen@intel.com> */ #include <linux/config.h> #include <linux/module.h> @@ -16,78 +18,75 @@ #include <linux/sched.h> #include <linux/smp.h> #include <linux/mm.h> +#include <linux/bootmem.h> #include <asm/delay.h> #include <asm/mmu_context.h> #include <asm/pgalloc.h> #include <asm/pal.h> #include <asm/tlbflush.h> +#include <asm/dma.h> static struct { unsigned long mask; /* mask of supported purge page-sizes */ - unsigned long max_bits; /* log2() of largest supported purge page-size */ + unsigned long max_bits; /* log2 of largest supported purge page-size */ } purge; struct ia64_ctx ia64_ctx = { .lock = SPIN_LOCK_UNLOCKED, .next = 1, - .limit = (1 << 15) - 1, /* start out with the safe (architected) limit */ .max_ctx = ~0U }; DEFINE_PER_CPU(u8, ia64_need_tlb_flush); /* + * Initializes the ia64_ctx.bitmap array based on max_ctx+1. + * Called after cpu_init() has setup ia64_ctx.max_ctx based on + * maximum RID that is supported by boot CPU. + */ +void __init +mmu_context_init (void) +{ + ia64_ctx.bitmap = alloc_bootmem((ia64_ctx.max_ctx+1)>>3); + ia64_ctx.flushmap = alloc_bootmem((ia64_ctx.max_ctx+1)>>3); +} + +/* * Acquire the ia64_ctx.lock before calling this function! */ void wrap_mmu_context (struct mm_struct *mm) { - unsigned long tsk_context, max_ctx = ia64_ctx.max_ctx; - struct task_struct *tsk; - int i; + int i, cpu; + unsigned long flush_bit; - if (ia64_ctx.next > max_ctx) - ia64_ctx.next = 300; /* skip daemons */ - ia64_ctx.limit = max_ctx + 1; + for (i=0; i <= ia64_ctx.max_ctx / BITS_PER_LONG; i++) { + flush_bit = xchg(&ia64_ctx.flushmap[i], 0); + ia64_ctx.bitmap[i] ^= flush_bit; + } + + /* use offset at 300 to skip daemons */ + ia64_ctx.next = find_next_zero_bit(ia64_ctx.bitmap, + ia64_ctx.max_ctx, 300); + ia64_ctx.limit = find_next_bit(ia64_ctx.bitmap, + ia64_ctx.max_ctx, ia64_ctx.next); /* - * Scan all the task's mm->context and set proper safe range + * can't call flush_tlb_all() here because of race condition + * with O(1) scheduler [EF] */ - - read_lock(&tasklist_lock); - repeat: - for_each_process(tsk) { - if (!tsk->mm) - continue; - tsk_context = tsk->mm->context; - if (tsk_context == ia64_ctx.next) { - if (++ia64_ctx.next >= ia64_ctx.limit) { - /* empty range: reset the range limit and start over */ - if (ia64_ctx.next > max_ctx) - ia64_ctx.next = 300; - ia64_ctx.limit = max_ctx + 1; - goto repeat; - } - } - if ((tsk_context > ia64_ctx.next) && (tsk_context < ia64_ctx.limit)) - ia64_ctx.limit = tsk_context; - } - read_unlock(&tasklist_lock); - /* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */ - { - int cpu = get_cpu(); /* prevent preemption/migration */ - for_each_online_cpu(i) { - if (i != cpu) - per_cpu(ia64_need_tlb_flush, i) = 1; - } - put_cpu(); - } + cpu = get_cpu(); /* prevent preemption/migration */ + for_each_online_cpu(i) + if (i != cpu) + per_cpu(ia64_need_tlb_flush, i) = 1; + put_cpu(); local_flush_tlb_all(); } void -ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long nbits) +ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, + unsigned long end, unsigned long nbits) { static DEFINE_SPINLOCK(ptcg_lock); @@ -135,7 +134,8 @@ local_flush_tlb_all (void) } void -flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end) +flush_tlb_range (struct vm_area_struct *vma, unsigned long start, + unsigned long end) { struct mm_struct *mm = vma->vm_mm; unsigned long size = end - start; @@ -149,7 +149,8 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long #endif nbits = ia64_fls(size + 0xfff); - while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits)) + while (unlikely (((1UL << nbits) & purge.mask) == 0) && + (nbits < purge.max_bits)) ++nbits; if (nbits > purge.max_bits) nbits = purge.max_bits; @@ -191,5 +192,5 @@ ia64_tlb_init (void) local_cpu_data->ptce_stride[0] = ptce_info.stride[0]; local_cpu_data->ptce_stride[1] = ptce_info.stride[1]; - local_flush_tlb_all(); /* nuke left overs from bootstrapping... */ + local_flush_tlb_all(); /* nuke left overs from bootstrapping... */ } diff --git a/arch/ia64/oprofile/Kconfig b/arch/ia64/oprofile/Kconfig index 56e6f614b04a..97271ab484dc 100644 --- a/arch/ia64/oprofile/Kconfig +++ b/arch/ia64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -22,5 +18,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 017cfc3f4789..20d76fae24e8 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -95,7 +95,7 @@ pci_sal_write (unsigned int seg, unsigned int bus, unsigned int devfn, } static struct pci_raw_ops pci_sal_ops = { - .read = pci_sal_read, + .read = pci_sal_read, .write = pci_sal_write }; @@ -137,35 +137,98 @@ alloc_pci_controller (int seg) return controller; } -static u64 __devinit -add_io_space (struct acpi_resource_address64 *addr) +struct pci_root_info { + struct pci_controller *controller; + char *name; +}; + +static unsigned int +new_space (u64 phys_base, int sparse) { - u64 offset; - int sparse = 0; + u64 mmio_base; int i; - if (addr->address_translation_offset == 0) - return IO_SPACE_BASE(0); /* part of legacy IO space */ - - if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION) - sparse = 1; + if (phys_base == 0) + return 0; /* legacy I/O port space */ - offset = (u64) ioremap(addr->address_translation_offset, 0); + mmio_base = (u64) ioremap(phys_base, 0); for (i = 0; i < num_io_spaces; i++) - if (io_space[i].mmio_base == offset && + if (io_space[i].mmio_base == mmio_base && io_space[i].sparse == sparse) - return IO_SPACE_BASE(i); + return i; if (num_io_spaces == MAX_IO_SPACES) { - printk("Too many IO port spaces\n"); + printk(KERN_ERR "PCI: Too many IO port spaces " + "(MAX_IO_SPACES=%lu)\n", MAX_IO_SPACES); return ~0; } i = num_io_spaces++; - io_space[i].mmio_base = offset; + io_space[i].mmio_base = mmio_base; io_space[i].sparse = sparse; - return IO_SPACE_BASE(i); + return i; +} + +static u64 __devinit +add_io_space (struct pci_root_info *info, struct acpi_resource_address64 *addr) +{ + struct resource *resource; + char *name; + u64 base, min, max, base_port; + unsigned int sparse = 0, space_nr, len; + + resource = kzalloc(sizeof(*resource), GFP_KERNEL); + if (!resource) { + printk(KERN_ERR "PCI: No memory for %s I/O port space\n", + info->name); + goto out; + } + + len = strlen(info->name) + 32; + name = kzalloc(len, GFP_KERNEL); + if (!name) { + printk(KERN_ERR "PCI: No memory for %s I/O port space name\n", + info->name); + goto free_resource; + } + + min = addr->min_address_range; + max = min + addr->address_length - 1; + if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION) + sparse = 1; + + space_nr = new_space(addr->address_translation_offset, sparse); + if (space_nr == ~0) + goto free_name; + + base = __pa(io_space[space_nr].mmio_base); + base_port = IO_SPACE_BASE(space_nr); + snprintf(name, len, "%s I/O Ports %08lx-%08lx", info->name, + base_port + min, base_port + max); + + /* + * The SDM guarantees the legacy 0-64K space is sparse, but if the + * mapping is done by the processor (not the bridge), ACPI may not + * mark it as sparse. + */ + if (space_nr == 0) + sparse = 1; + + resource->name = name; + resource->flags = IORESOURCE_MEM; + resource->start = base + (sparse ? IO_SPACE_SPARSE_ENCODING(min) : min); + resource->end = base + (sparse ? IO_SPACE_SPARSE_ENCODING(max) : max); + insert_resource(&iomem_resource, resource); + + return base_port; + +free_name: + kfree(name); +free_resource: + kfree(resource); +out: + return ~0; } static acpi_status __devinit resource_to_window(struct acpi_resource *resource, @@ -205,11 +268,6 @@ count_window (struct acpi_resource *resource, void *data) return AE_OK; } -struct pci_root_info { - struct pci_controller *controller; - char *name; -}; - static __devinit acpi_status add_window(struct acpi_resource *res, void *data) { struct pci_root_info *info = data; @@ -231,7 +289,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) } else if (addr.resource_type == ACPI_IO_RANGE) { flags = IORESOURCE_IO; root = &ioport_resource; - offset = add_io_space(&addr); + offset = add_io_space(info, &addr); if (offset == ~0) return AE_OK; } else @@ -241,7 +299,7 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) window->resource.name = info->name; window->resource.flags = flags; window->resource.start = addr.min_address_range + offset; - window->resource.end = addr.max_address_range + offset; + window->resource.end = window->resource.start + addr.address_length - 1; window->resource.child = NULL; window->offset = offset; @@ -739,7 +797,7 @@ int pci_vector_resources(int last, int nr_released) { int count = nr_released; - count += (IA64_LAST_DEVICE_VECTOR - last); + count += (IA64_LAST_DEVICE_VECTOR - last); return count; } diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index b4f5053f5e1b..05e4ea889981 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -349,7 +349,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) return; /*bus # does not exist */ prom_bussoft_ptr = __va(prom_bussoft_ptr); - controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL); + controller = kzalloc(sizeof(struct pci_controller), GFP_KERNEL); controller->segment = segment; if (!controller) BUG(); diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 0fb579ef18c2..e510dce9971f 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -30,6 +30,7 @@ #include <linux/root_dev.h> #include <linux/nodemask.h> #include <linux/pm.h> +#include <linux/efi.h> #include <asm/io.h> #include <asm/sal.h> @@ -242,6 +243,135 @@ static void __init sn_check_for_wars(void) } } +/* + * Scan the EFI PCDP table (if it exists) for an acceptable VGA console + * output device. If one exists, pick it and set sn_legacy_{io,mem} to + * reflect the bus offsets needed to address it. + * + * Since pcdp support in SN is not supported in the 2.4 kernel (or at least + * the one lbs is based on) just declare the needed structs here. + * + * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf + * + * Returns 0 if no acceptable vga is found, !0 otherwise. + * + * Note: This stuff is duped here because Altix requires the PCDP to + * locate a usable VGA device due to lack of proper ACPI support. Structures + * could be used from drivers/firmware/pcdp.h, but it was decided that moving + * this file to a more public location just for Altix use was undesireable. + */ + +struct hcdp_uart_desc { + u8 pad[45]; +}; + +struct pcdp { + u8 signature[4]; /* should be 'HCDP' */ + u32 length; + u8 rev; /* should be >=3 for pcdp, <3 for hcdp */ + u8 sum; + u8 oem_id[6]; + u64 oem_tableid; + u32 oem_rev; + u32 creator_id; + u32 creator_rev; + u32 num_type0; + struct hcdp_uart_desc uart[0]; /* num_type0 of these */ + /* pcdp descriptors follow */ +} __attribute__((packed)); + +struct pcdp_device_desc { + u8 type; + u8 primary; + u16 length; + u16 index; + /* interconnect specific structure follows */ + /* device specific structure follows that */ +} __attribute__((packed)); + +struct pcdp_interface_pci { + u8 type; /* 1 == pci */ + u8 reserved; + u16 length; + u8 segment; + u8 bus; + u8 dev; + u8 fun; + u16 devid; + u16 vendid; + u32 acpi_interrupt; + u64 mmio_tra; + u64 ioport_tra; + u8 flags; + u8 translation; +} __attribute__((packed)); + +struct pcdp_vga_device { + u8 num_eas_desc; + /* ACPI Extended Address Space Desc follows */ +} __attribute__((packed)); + +/* from pcdp_device_desc.primary */ +#define PCDP_PRIMARY_CONSOLE 0x01 + +/* from pcdp_device_desc.type */ +#define PCDP_CONSOLE_INOUT 0x0 +#define PCDP_CONSOLE_DEBUG 0x1 +#define PCDP_CONSOLE_OUT 0x2 +#define PCDP_CONSOLE_IN 0x3 +#define PCDP_CONSOLE_TYPE_VGA 0x8 + +#define PCDP_CONSOLE_VGA (PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT) + +/* from pcdp_interface_pci.type */ +#define PCDP_IF_PCI 1 + +/* from pcdp_interface_pci.translation */ +#define PCDP_PCI_TRANS_IOPORT 0x02 +#define PCDP_PCI_TRANS_MMIO 0x01 + +static void +sn_scan_pcdp(void) +{ + u8 *bp; + struct pcdp *pcdp; + struct pcdp_device_desc device; + struct pcdp_interface_pci if_pci; + extern struct efi efi; + + pcdp = efi.hcdp; + if (! pcdp) + return; /* no hcdp/pcdp table */ + + if (pcdp->rev < 3) + return; /* only support PCDP (rev >= 3) */ + + for (bp = (u8 *)&pcdp->uart[pcdp->num_type0]; + bp < (u8 *)pcdp + pcdp->length; + bp += device.length) { + memcpy(&device, bp, sizeof(device)); + if (! (device.primary & PCDP_PRIMARY_CONSOLE)) + continue; /* not primary console */ + + if (device.type != PCDP_CONSOLE_VGA) + continue; /* not VGA descriptor */ + + memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci)); + if (if_pci.type != PCDP_IF_PCI) + continue; /* not PCI interconnect */ + + if (if_pci.translation & PCDP_PCI_TRANS_IOPORT) + vga_console_iobase = + if_pci.ioport_tra | __IA64_UNCACHED_OFFSET; + + if (if_pci.translation & PCDP_PCI_TRANS_MMIO) + vga_console_membase = + if_pci.mmio_tra | __IA64_UNCACHED_OFFSET; + + break; /* once we find the primary, we're done */ + } +} + /** * sn_setup - SN platform setup routine * @cmdline_p: kernel command line @@ -263,16 +393,35 @@ void __init sn_setup(char **cmdline_p) #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) /* - * If there was a primary vga adapter identified through the - * EFI PCDP table, make it the preferred console. Otherwise - * zero out conswitchp. + * Handle SN vga console. + * + * SN systems do not have enough ACPI table information + * being passed from prom to identify VGA adapters and the legacy + * addresses to access them. Until that is done, SN systems rely + * on the PCDP table to identify the primary VGA console if one + * exists. + * + * However, kernel PCDP support is optional, and even if it is built + * into the kernel, it will not be used if the boot cmdline contains + * console= directives. + * + * So, to work around this mess, we duplicate some of the PCDP code + * here so that the primary VGA console (as defined by PCDP) will + * work on SN systems even if a different console (e.g. serial) is + * selected on the boot line (or CONFIG_EFI_PCDP is off). */ + if (! vga_console_membase) + sn_scan_pcdp(); + if (vga_console_membase) { /* usable vga ... make tty0 the preferred default console */ - add_preferred_console("tty", 0, NULL); + if (!strstr(*cmdline_p, "console=")) + add_preferred_console("tty", 0, NULL); } else { printk(KERN_DEBUG "SGI: Disabling VGA console\n"); + if (!strstr(*cmdline_p, "console=")) + add_preferred_console("ttySG", 0, NULL); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #else diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index fbcedc7c27fa..5483a9f227d4 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -163,7 +163,7 @@ struct xpc_vars { u8 version; u64 heartbeat; u64 heartbeating_to_mask; - u64 kdb_status; /* 0 = machine running */ + u64 heartbeat_offline; /* if 0, heartbeat should be changing */ int act_nasid; int act_phys_cpuid; u64 vars_part_pa; diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index cece3c7c69be..b617236524c6 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -57,6 +57,7 @@ #include <linux/reboot.h> #include <asm/sn/intr.h> #include <asm/sn/sn_sal.h> +#include <asm/kdebug.h> #include <asm/uaccess.h> #include "xpc.h" @@ -188,6 +189,11 @@ static struct notifier_block xpc_reboot_notifier = { .notifier_call = xpc_system_reboot, }; +static int xpc_system_die(struct notifier_block *, unsigned long, void *); +static struct notifier_block xpc_die_notifier = { + .notifier_call = xpc_system_die, +}; + /* * Timer function to enforce the timelimit on the partition disengage request. @@ -997,6 +1003,9 @@ xpc_do_exit(enum xpc_retval reason) /* take ourselves off of the reboot_notifier_list */ (void) unregister_reboot_notifier(&xpc_reboot_notifier); + /* take ourselves off of the die_notifier list */ + (void) unregister_die_notifier(&xpc_die_notifier); + /* close down protections for IPI operations */ xpc_restrict_IPI_ops(); @@ -1011,6 +1020,63 @@ xpc_do_exit(enum xpc_retval reason) /* + * Called when the system is about to be either restarted or halted. + */ +static void +xpc_die_disengage(void) +{ + struct xpc_partition *part; + partid_t partid; + unsigned long engaged; + long time, print_time, disengage_request_timeout; + + + /* keep xpc_hb_checker thread from doing anything (just in case) */ + xpc_exiting = 1; + + xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */ + + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + part = &xpc_partitions[partid]; + + if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> + remote_vars_version)) { + + /* just in case it was left set by an earlier XPC */ + xpc_clear_partition_engaged(1UL << partid); + continue; + } + + if (xpc_partition_engaged(1UL << partid) || + part->act_state != XPC_P_INACTIVE) { + xpc_request_partition_disengage(part); + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } + } + + print_time = rtc_time(); + disengage_request_timeout = print_time + + (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second); + + /* wait for all other partitions to disengage from us */ + + while ((engaged = xpc_partition_engaged(-1UL)) && + (time = rtc_time()) < disengage_request_timeout) { + + if (time >= print_time) { + dev_info(xpc_part, "waiting for remote partitions to " + "disengage, engaged=0x%lx\n", engaged); + print_time = time + (XPC_DISENGAGE_PRINTMSG_INTERVAL * + sn_rtc_cycles_per_second); + } + } + dev_info(xpc_part, "finished waiting for remote partitions to " + "disengage, engaged=0x%lx\n", engaged); +} + + +/* * This function is called when the system is being rebooted. */ static int @@ -1038,6 +1104,33 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) } +/* + * This function is called when the system is being rebooted. + */ +static int +xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) +{ + switch (event) { + case DIE_MACHINE_RESTART: + case DIE_MACHINE_HALT: + xpc_die_disengage(); + break; + case DIE_MCA_MONARCH_ENTER: + case DIE_INIT_MONARCH_ENTER: + xpc_vars->heartbeat++; + xpc_vars->heartbeat_offline = 1; + break; + case DIE_MCA_MONARCH_LEAVE: + case DIE_INIT_MONARCH_LEAVE: + xpc_vars->heartbeat++; + xpc_vars->heartbeat_offline = 0; + break; + } + + return NOTIFY_DONE; +} + + int __init xpc_init(void) { @@ -1154,6 +1247,12 @@ xpc_init(void) dev_warn(xpc_part, "can't register reboot notifier\n"); } + /* add ourselves to the die_notifier list (i.e., ia64die_chain) */ + ret = register_die_notifier(&xpc_die_notifier); + if (ret != 0) { + dev_warn(xpc_part, "can't register die notifier\n"); + } + /* * Set the beating to other partitions into motion. This is @@ -1179,6 +1278,9 @@ xpc_init(void) /* take ourselves off of the reboot_notifier_list */ (void) unregister_reboot_notifier(&xpc_reboot_notifier); + /* take ourselves off of the die_notifier list */ + (void) unregister_die_notifier(&xpc_die_notifier); + del_timer_sync(&xpc_hb_timer); free_irq(SGI_XPC_ACTIVATE, NULL); xpc_restrict_IPI_ops(); diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 581e113d2d37..cdd6431853a1 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -436,13 +436,13 @@ xpc_check_remote_hb(void) } dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat" - " = %ld, kdb_status = %ld, HB_mask = 0x%lx\n", partid, - remote_vars->heartbeat, part->last_heartbeat, - remote_vars->kdb_status, + " = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n", + partid, remote_vars->heartbeat, part->last_heartbeat, + remote_vars->heartbeat_offline, remote_vars->heartbeating_to_mask); if (((remote_vars->heartbeat == part->last_heartbeat) && - (remote_vars->kdb_status == 0)) || + (remote_vars->heartbeat_offline == 0)) || !xpc_hb_allowed(sn_partition_id, remote_vars)) { XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat); diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 7b03b8084ffc..1f500c81002c 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -212,13 +212,13 @@ void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info) pdi_pcibus_info; /* Disable the device's IRQ */ - pcireg_intr_enable_bit_clr(pcibus_info, bit); + pcireg_intr_enable_bit_clr(pcibus_info, (1 << bit)); /* Change the device's IRQ */ pcireg_intr_addr_addr_set(pcibus_info, bit, xtalk_addr); /* Re-enable the device's IRQ */ - pcireg_intr_enable_bit_set(pcibus_info, bit); + pcireg_intr_enable_bit_set(pcibus_info, (1 << bit)); pcibr_force_interrupt(sn_irq_info); } diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 4f718c3e93d3..5d534091262c 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -131,7 +131,7 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits); + __sn_clrq_relaxed(&ptr->pic.p_int_enable, bits); break; default: panic diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 9f03d4e5121c..dda196c9e324 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -218,7 +218,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, if (i > last) return 0; - map = kcalloc(1, sizeof(struct tioce_dmamap), GFP_ATOMIC); + map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC); if (!map) return 0; @@ -555,7 +555,7 @@ tioce_kern_init(struct tioce_common *tioce_common) struct tioce *tioce_mmr; struct tioce_kernel *tioce_kern; - tioce_kern = kcalloc(1, sizeof(struct tioce_kernel), GFP_KERNEL); + tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL); if (!tioce_kern) { return NULL; } @@ -727,7 +727,7 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * Allocate kernel bus soft and copy from prom. */ - tioce_common = kcalloc(1, sizeof(struct tioce_common), GFP_KERNEL); + tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL); if (!tioce_common) return NULL; diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index ea13a8f4d8b0..cc4b571e5db7 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -104,7 +104,9 @@ void cpu_idle (void) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c index 640d592ea072..b90c54169fa5 100644 --- a/arch/m32r/kernel/smpboot.c +++ b/arch/m32r/kernel/smpboot.c @@ -426,6 +426,7 @@ void __init smp_cpus_done(unsigned int max_cpus) int __init start_secondary(void *unused) { cpu_init(); + preempt_disable(); smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) cpu_relax(); diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c index 6df7fb60dfea..e79bbc94216d 100644 --- a/arch/m68k/atari/time.c +++ b/arch/m68k/atari/time.c @@ -212,10 +212,8 @@ int atari_tt_hwclk( int op, struct rtc_time *t ) * additionally the RTC_SET bit is set to prevent an update cycle. */ - while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(HWCLK_POLL_INTERVAL); - } + while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) + schedule_timeout_interruptible(HWCLK_POLL_INTERVAL); local_irq_save(flags); RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET ); diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S index 9571a21d6ad4..a1629194e3fd 100644 --- a/arch/m68k/fpsp040/skeleton.S +++ b/arch/m68k/fpsp040/skeleton.S @@ -381,10 +381,8 @@ fpsp_done: .Lnotkern: SAVE_ALL_INT GET_CURRENT(%d0) - tstb %curptr@(TASK_NEEDRESCHED) - jne ret_from_exception | deliver signals, - | reschedule etc.. - RESTORE_ALL + | deliver signals, reschedule etc.. + jra ret_from_exception | | mem_write --- write to user or supervisor address space diff --git a/arch/m68k/ifpsp060/iskeleton.S b/arch/m68k/ifpsp060/iskeleton.S index 4ba2c74da93d..b2dbdf5ee309 100644 --- a/arch/m68k/ifpsp060/iskeleton.S +++ b/arch/m68k/ifpsp060/iskeleton.S @@ -75,10 +75,8 @@ _060_isp_done: .Lnotkern: SAVE_ALL_INT GET_CURRENT(%d0) - tstb %curptr@(TASK_NEEDRESCHED) - jne ret_from_exception | deliver signals, - | reschedule etc.. - RESTORE_ALL + | deliver signals, reschedule etc.. + jra ret_from_exception | | _060_real_chk(): diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c index cee3317b8665..c787c5ba9513 100644 --- a/arch/m68k/kernel/asm-offsets.c +++ b/arch/m68k/kernel/asm-offsets.c @@ -25,12 +25,8 @@ int main(void) DEFINE(TASK_STATE, offsetof(struct task_struct, state)); DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); - DEFINE(TASK_WORK, offsetof(struct task_struct, thread.work)); - DEFINE(TASK_NEEDRESCHED, offsetof(struct task_struct, thread.work.need_resched)); - DEFINE(TASK_SYSCALL_TRACE, offsetof(struct task_struct, thread.work.syscall_trace)); - DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, thread.work.sigpending)); - DEFINE(TASK_NOTIFY_RESUME, offsetof(struct task_struct, thread.work.notify_resume)); DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info)); DEFINE(TASK_MM, offsetof(struct task_struct, mm)); DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); @@ -45,6 +41,10 @@ int main(void) DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl)); DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); + /* offsets into the thread_info struct */ + DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count)); + DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags)); + /* offsets into the pt_regs */ DEFINE(PT_D0, offsetof(struct pt_regs, d0)); DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0)); diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 23ca60a45552..320fde05dc63 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -44,9 +44,7 @@ #include <asm/asm-offsets.h> -.globl system_call, buserr, trap -.globl resume, ret_from_exception -.globl ret_from_signal +.globl system_call, buserr, trap, resume .globl inthandler, sys_call_table .globl sys_fork, sys_clone, sys_vfork .globl ret_from_interrupt, bad_interrupt @@ -58,7 +56,7 @@ ENTRY(buserr) movel %sp,%sp@- | stack frame pointer argument bsrl buserr_c addql #4,%sp - jra ret_from_exception + jra .Lret_from_exception ENTRY(trap) SAVE_ALL_INT @@ -66,7 +64,7 @@ ENTRY(trap) movel %sp,%sp@- | stack frame pointer argument bsrl trap_c addql #4,%sp - jra ret_from_exception + jra .Lret_from_exception | After a fork we jump here directly from resume, | so that %d1 contains the previous task @@ -75,30 +73,31 @@ ENTRY(ret_from_fork) movel %d1,%sp@- jsr schedule_tail addql #4,%sp - jra ret_from_exception + jra .Lret_from_exception -badsys: - movel #-ENOSYS,%sp@(PT_D0) - jra ret_from_exception - -do_trace: +do_trace_entry: movel #-ENOSYS,%sp@(PT_D0) | needed for strace subql #4,%sp SAVE_SWITCH_STACK jbsr syscall_trace RESTORE_SWITCH_STACK addql #4,%sp - movel %sp@(PT_ORIG_D0),%d1 - movel #-ENOSYS,%d0 - cmpl #NR_syscalls,%d1 - jcc 1f - jbsr @(sys_call_table,%d1:l:4)@(0) -1: movel %d0,%sp@(PT_D0) | save the return value - subql #4,%sp | dummy return address + movel %sp@(PT_ORIG_D0),%d0 + cmpl #NR_syscalls,%d0 + jcs syscall +badsys: + movel #-ENOSYS,%sp@(PT_D0) + jra ret_from_syscall + +do_trace_exit: + subql #4,%sp SAVE_SWITCH_STACK jbsr syscall_trace + RESTORE_SWITCH_STACK + addql #4,%sp + jra .Lret_from_exception -ret_from_signal: +ENTRY(ret_from_signal) RESTORE_SWITCH_STACK addql #4,%sp /* on 68040 complete pending writebacks if any */ @@ -111,7 +110,7 @@ ret_from_signal: addql #4,%sp 1: #endif - jra ret_from_exception + jra .Lret_from_exception ENTRY(system_call) SAVE_ALL_SYS @@ -120,30 +119,34 @@ ENTRY(system_call) | save top of frame movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) - tstb %curptr@(TASK_SYSCALL_TRACE) - jne do_trace + | syscall trace? + tstb %curptr@(TASK_INFO+TINFO_FLAGS+2) + jmi do_trace_entry cmpl #NR_syscalls,%d0 jcc badsys +syscall: jbsr @(sys_call_table,%d0:l:4)@(0) movel %d0,%sp@(PT_D0) | save the return value - +ret_from_syscall: |oriw #0x0700,%sr - movel %curptr@(TASK_WORK),%d0 + movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0 jne syscall_exit_work 1: RESTORE_ALL syscall_exit_work: btst #5,%sp@(PT_SR) | check if returning to kernel bnes 1b | if so, skip resched, signals - tstw %d0 - jeq do_signal_return - tstb %d0 - jne do_delayed_trace - + lslw #1,%d0 + jcs do_trace_exit + jmi do_delayed_trace + lslw #8,%d0 + jmi do_signal_return pea resume_userspace - jmp schedule + jra schedule + -ret_from_exception: +ENTRY(ret_from_exception) +.Lret_from_exception: btst #5,%sp@(PT_SR) | check if returning to kernel bnes 1f | if so, skip resched, signals | only allow interrupts when we are really the last one on the @@ -152,19 +155,18 @@ ret_from_exception: andw #ALLOWINT,%sr resume_userspace: - movel %curptr@(TASK_WORK),%d0 - lsrl #8,%d0 + moveb %curptr@(TASK_INFO+TINFO_FLAGS+3),%d0 jne exit_work 1: RESTORE_ALL exit_work: | save top of frame movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) - tstb %d0 - jeq do_signal_return - + lslb #1,%d0 + jmi do_signal_return pea resume_userspace - jmp schedule + jra schedule + do_signal_return: |andw #ALLOWINT,%sr @@ -254,7 +256,7 @@ ret_from_interrupt: /* check if we need to do software interrupts */ tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING - jeq ret_from_exception + jeq .Lret_from_exception pea ret_from_exception jra do_softirq diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index 11b1b90ba6ba..13d109328a42 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -102,7 +102,9 @@ void cpu_idle(void) while (1) { while (!need_resched()) idle(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index f7f1d2e5b90b..540638ca81f9 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -109,7 +109,7 @@ static inline void singlestep_disable(struct task_struct *child) { unsigned long tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16); put_reg(child, PT_SR, tmp); - child->thread.work.delayed_trace = 0; + clear_tsk_thread_flag(child, TIF_DELAYED_TRACE); } /* @@ -118,51 +118,14 @@ static inline void singlestep_disable(struct task_struct *child) void ptrace_disable(struct task_struct *child) { singlestep_disable(child); - child->thread.work.syscall_trace = 0; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; unsigned long tmp; int i, ret = 0; - lock_kernel(); - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) { - ret = -EPERM; - goto out; - } - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - goto out; - } - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (unlikely(!child)) { - ret = -ESRCH; - goto out; - } - - /* you may not mess with init */ - if (unlikely(pid == 1)) { - ret = -EPERM; - goto out_tsk; - } - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -235,9 +198,9 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) goto out_eio; if (request == PTRACE_SYSCALL) - child->thread.work.syscall_trace = ~0; + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); else - child->thread.work.syscall_trace = 0; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); child->exit_code = data; singlestep_disable(child); wake_up_process(child); @@ -260,10 +223,10 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!valid_signal(data)) goto out_eio; - child->thread.work.syscall_trace = 0; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16); put_reg(child, PT_SR, tmp); - child->thread.work.delayed_trace = 1; + set_tsk_thread_flag(child, TIF_DELAYED_TRACE); child->exit_code = data; /* give it a chance to run. */ @@ -317,21 +280,14 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; out_eio: - ret = -EIO; - goto out_tsk; + return -EIO; } asmlinkage void syscall_trace(void) { - if (!current->thread.work.delayed_trace && - !current->thread.work.syscall_trace) - return; ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); /* diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 8520df9cee6d..b96498120fe9 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -71,6 +71,11 @@ config M5206e help Motorola ColdFire 5206e processor support. +config M520x + bool "MCF520x" + help + Freescale Coldfire 5207/5208 processor support. + config M523x bool "MCF523x" help @@ -120,7 +125,7 @@ config M527x config COLDFIRE bool - depends on (M5206 || M5206e || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) + depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) default y choice @@ -322,6 +327,12 @@ config ELITE help Support for the Motorola M5206eLITE board. +config M5208EVB + bool "Freescale M5208EVB board support" + depends on M520x + help + Support for the Freescale Coldfire M5208EVB. + config M5235EVB bool "Freescale M5235EVB support" depends on M523x @@ -465,10 +476,10 @@ config ARNEWSH default y depends on (ARN5206 || ARN5307) -config MOTOROLA +config FREESCALE bool default y - depends on (M5206eC3 || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) + depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) config HW_FEITH bool diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index b8fdf191b8f6..b6b5c14e55fd 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -14,6 +14,7 @@ platform-$(CONFIG_M68VZ328) := 68VZ328 platform-$(CONFIG_M68360) := 68360 platform-$(CONFIG_M5206) := 5206 platform-$(CONFIG_M5206e) := 5206e +platform-$(CONFIG_M520x) := 520x platform-$(CONFIG_M523x) := 523x platform-$(CONFIG_M5249) := 5249 platform-$(CONFIG_M527x) := 527x @@ -29,7 +30,7 @@ board-$(CONFIG_UCDIMM) := ucdimm board-$(CONFIG_UCQUICC) := uCquicc board-$(CONFIG_DRAGEN2) := de2 board-$(CONFIG_ARNEWSH) := ARNEWSH -board-$(CONFIG_MOTOROLA) := MOTOROLA +board-$(CONFIG_FREESCALE) := FREESCALE board-$(CONFIG_M5235EVB) := M5235EVB board-$(CONFIG_M5271EVB) := M5271EVB board-$(CONFIG_M5275EVB) := M5275EVB @@ -41,6 +42,7 @@ board-$(CONFIG_SECUREEDGEMP3) := MP3 board-$(CONFIG_CLEOPATRA) := CLEOPATRA board-$(CONFIG_senTec) := senTec board-$(CONFIG_SNEHA) := SNEHA +board-$(CONFIG_M5208EVB) := M5208EVB board-$(CONFIG_MOD5272) := MOD5272 BOARD := $(board-y) @@ -56,6 +58,7 @@ MODEL := $(model-y) # cpuclass-$(CONFIG_M5206) := 5307 cpuclass-$(CONFIG_M5206e) := 5307 +cpuclass-$(CONFIG_M520x) := 5307 cpuclass-$(CONFIG_M523x) := 5307 cpuclass-$(CONFIG_M5249) := 5307 cpuclass-$(CONFIG_M527x) := 5307 @@ -80,6 +83,7 @@ export PLATFORM BOARD MODEL CPUCLASS # cflags-$(CONFIG_M5206) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M5206e) := -m5200 -Wa,-S -Wa,-m5200 +cflags-$(CONFIG_M520x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M523x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M5249) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M527x) := -m5307 -Wa,-S -Wa,-m5307 @@ -95,7 +99,6 @@ cflags-$(CONFIG_M68360) := -m68332 AFLAGS += $(cflags-y) CFLAGS += $(cflags-y) -CFLAGS += -fno-builtin CFLAGS += -O1 -g CFLAGS += -D__linux__ CFLAGS += -DUTS_SYSNAME=\"uClinux\" diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index cd3ffe12653e..b988c7bdc6e4 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -15,6 +15,7 @@ #include <linux/hardirq.h> #include <asm/bootinfo.h> #include <asm/irq.h> +#include <asm/irqnode.h> #include <asm/thread_info.h> #define DEFINE(sym, val) \ diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c index 621d7b91ccfe..262ab8c72e5f 100644 --- a/arch/m68knommu/kernel/ptrace.c +++ b/arch/m68knommu/kernel/ptrace.c @@ -101,43 +101,10 @@ void ptrace_disable(struct task_struct *child) put_reg(child, PT_SR, tmp); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(truct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -357,10 +324,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index a220345e9746..abb80fa2b940 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -107,6 +107,9 @@ void (*mach_power_off)( void ) = NULL; #if defined(CONFIG_M5206e) #define CPU "COLDFIRE(m5206e)" #endif +#if defined(CONFIG_M520x) + #define CPU "COLDFIRE(m520x)" +#endif #if defined(CONFIG_M523x) #define CPU "COLDFIRE(m523x)" #endif @@ -132,7 +135,7 @@ void (*mach_power_off)( void ) = NULL; #define CPU "COLDFIRE(m5407)" #endif #ifndef CPU - #define CPU "UNKOWN" + #define CPU "UNKNOWN" #endif /* (es) */ diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 47f06787190d..0eab92ca4b97 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -125,6 +125,14 @@ #endif /* + * The Freescale 5208EVB board has 32MB of RAM. + */ +#if defined(CONFIG_M5208EVB) +#define RAM_START 0x40020000 +#define RAM_LENGTH 0x01e00000 +#endif + +/* * The senTec COBRA5272 board has nearly the same memory layout as * the M5272C3. We assume 16MiB ram. */ @@ -275,6 +283,7 @@ SECTIONS { *(__ksymtab_strings) /* Built-in module parameters */ + . = ALIGN(4) ; __start___param = .; *(__param) __stop___param = .; diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile new file mode 100644 index 000000000000..e861b05106bc --- /dev/null +++ b/arch/m68knommu/platform/520x/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the M5208 specific file. +# + +# +# If you want to play with the HW breakpoints then you will +# need to add define this, which will give you a stack backtrace +# on the console port whenever a DBG interrupt occurs. You have to +# set up you HW breakpoints to trigger a DBG interrupt: +# +# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT +# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# + +ifdef CONFIG_FULLDEBUG +AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1 +endif + +obj-y := config.o diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c new file mode 100644 index 000000000000..71dea2e0f452 --- /dev/null +++ b/arch/m68knommu/platform/520x/config.c @@ -0,0 +1,65 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/520x/config.c + * + * Copyright (C) 2005, Freescale (www.freescale.com) + * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) + * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <asm/machdep.h> +#include <asm/dma.h> + +/***************************************************************************/ + +/* + * DMA channel base address table. + */ +unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; +unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +/***************************************************************************/ + +void coldfire_pit_tick(void); +void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +unsigned long coldfire_pit_offset(void); +void coldfire_trap_init(void); +void coldfire_reset(void); + +/***************************************************************************/ + +/* + * Program the vector to be an auto-vectored. + */ + +void mcf_autovector(unsigned int vec) +{ + /* Everything is auto-vectored on the 520x devices */ +} + +/***************************************************************************/ + +void config_BSP(char *commandp, int size) +{ +#ifdef CONFIG_BOOTPARAM + strncpy(commandp, CONFIG_BOOTPARAM_STRING, size); + commandp[size-1] = 0; +#else + memset(commandp, 0, size); +#endif + + mach_sched_init = coldfire_pit_init; + mach_tick = coldfire_pit_tick; + mach_gettimeoffset = coldfire_pit_offset; + mach_trap_init = coldfire_trap_init; + mach_reset = coldfire_reset; +} + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile index 6fe5a2b8fb08..8d1619dc1ea6 100644 --- a/arch/m68knommu/platform/5307/Makefile +++ b/arch/m68knommu/platform/5307/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_COLDFIRE) += entry.o vectors.o ints.o obj-$(CONFIG_M5206) += timers.o obj-$(CONFIG_M5206e) += timers.o +obj-$(CONFIG_M520x) += pit.o obj-$(CONFIG_M523x) += pit.o obj-$(CONFIG_M5249) += timers.o obj-$(CONFIG_M527x) += pit.o diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S index 7f4ba837901f..c30c462b99b1 100644 --- a/arch/m68knommu/platform/5307/head.S +++ b/arch/m68knommu/platform/5307/head.S @@ -113,6 +113,9 @@ #define MEM_BASE 0x02000000 #define VBR_BASE 0x20000000 /* vectors in SRAM */ #endif +#if defined(CONFIG_M5208EVB) +#define MEM_BASE 0x40000000 +#endif #ifndef MEM_BASE #define MEM_BASE 0x00000000 /* memory base at address 0 */ diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c index 0117754d44f3..a134fb2f0566 100644 --- a/arch/m68knommu/platform/5307/ints.c +++ b/arch/m68knommu/platform/5307/ints.c @@ -26,6 +26,7 @@ #include <asm/system.h> #include <asm/irq.h> +#include <asm/irqnode.h> #include <asm/traps.h> #include <asm/page.h> #include <asm/machdep.h> diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index a9b2c2e7e280..323f2677e49d 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -3,7 +3,7 @@ /* * pit.c -- Motorola ColdFire PIT timer. Currently this type of * hardware timer only exists in the Motorola ColdFire - * 5270/5271 and 5282 CPUs. + * 5270/5271, 5282 and other CPUs. * * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) @@ -47,10 +47,10 @@ void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)) icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + MCFINT_PIT1); - *icrp = 0x2b; /* PIT1 with level 5, priority 3 */ + *icrp = ICR_INTRCONF; - imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - *imrp &= ~(1 << (MCFINT_PIT1 - 32)); + imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); + *imrp &= ~MCFPIT_IMR_IBIT; /* Set up PIT timer 1 as poll clock */ tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1); @@ -70,7 +70,7 @@ unsigned long coldfire_pit_offset(void) unsigned long pmr, pcntr, offset; tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1); - ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IPRH); + ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); pmr = *(&tp->pmr); pcntr = *(&tp->pcntr); @@ -80,7 +80,7 @@ unsigned long coldfire_pit_offset(void) * timer interupt is pending, then add on a ticks worth of time. */ offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr; - if ((offset < (1000000 / HZ / 2)) && (*ipr & (1 << (MCFINT_PIT1 - 32)))) + if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT)) offset += 1000000 / HZ; return offset; } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0097a0d53b3b..e380a8322a94 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -958,7 +958,7 @@ config SOC_PNX8550 bool select DMA_NONCOHERENT select HW_HAS_PCI - select SYS_HAS_CPU_R4X00 + select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL config SWAP_IO_SPACE diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 02692027730a..e14ba5e01a36 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -700,6 +700,7 @@ load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000 # core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \ arch/mips/jmr3927/common/ +cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 # diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c index f85093b8d54d..f4926315fb68 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/au1000/common/power.c @@ -32,6 +32,7 @@ #include <linux/config.h> #include <linux/init.h> #include <linux/pm.h> +#include <linux/pm_legacy.h> #include <linux/slab.h> #include <linux/sysctl.h> #include <linux/jiffies.h> diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 1ef15d5ef943..08c8c855cc9c 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -93,7 +93,7 @@ void __init plat_setup(void) argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_AU1X00_CONSOLE +#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) if ((argptr = strstr(argptr, "console=")) == NULL) { argptr = prom_getcmdline(); strcat(argptr, " console=ttyS0,115200"); @@ -111,17 +111,6 @@ void __init plat_setup(void) } #endif -#ifdef CONFIG_FB_E1356 - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); -#ifdef CONFIG_MIPS_PB1000 - strcat(argptr, " video=e1356fb:system:pb1000,mmunalign:1"); -#else - strcat(argptr, " video=e1356fb:system:pb1500"); -#endif - } -#endif - #ifdef CONFIG_FB_XPERT98 if ((argptr = strstr(argptr, "video=")) == NULL) { argptr = prom_getcmdline(); diff --git a/arch/mips/au1000/common/usbdev.c b/arch/mips/au1000/common/usbdev.c index 0b21bed7ee55..2cab7629702c 100644 --- a/arch/mips/au1000/common/usbdev.c +++ b/arch/mips/au1000/common/usbdev.c @@ -348,7 +348,7 @@ endpoint_stall(endpoint_t * ep) { u32 cs; - warn(__FUNCTION__); + warn("%s", __FUNCTION__); cs = au_readl(ep->reg->ctrl_stat) | USBDEV_CS_STALL; au_writel(cs, ep->reg->ctrl_stat); @@ -360,7 +360,7 @@ endpoint_unstall(endpoint_t * ep) { u32 cs; - warn(__FUNCTION__); + warn("%s", __FUNCTION__); cs = au_readl(ep->reg->ctrl_stat) & ~USBDEV_CS_STALL; au_writel(cs, ep->reg->ctrl_stat); diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore new file mode 100644 index 000000000000..ba63401c6e10 --- /dev/null +++ b/arch/mips/boot/.gitignore @@ -0,0 +1,4 @@ +mkboot +elf2ecoff +zImage +zImage.tmp diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 132ec3dac63f..74990758154b 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:13 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 12:14:02 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -191,6 +209,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -309,6 +328,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -363,6 +386,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -412,6 +436,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -472,10 +497,18 @@ CONFIG_IPDDP_DECAP=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -488,8 +521,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -498,13 +533,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -CONFIG_NET_CLS_IND=y # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +CONFIG_NET_CLS_IND=y +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -565,18 +601,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -643,6 +670,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -653,6 +681,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -707,6 +736,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -736,7 +766,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -754,6 +783,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -933,6 +963,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -992,6 +1023,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -1037,7 +1072,7 @@ CONFIG_JFS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 25e8a08e68be..ea4b75604c23 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:17 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:36 2005 # CONFIG_MIPS=y @@ -61,6 +61,23 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -127,8 +144,8 @@ CONFIG_SIBYTE_SB1xxx_SOC=y # CONFIG_CPU_SB1_PASS_2_112x is not set # CONFIG_CPU_SB1_PASS_3 is not set # CONFIG_SIMULATION is not set -# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set -# CONFIG_CONFIG_SB1_CERR_STALL is not set +# CONFIG_SB1_CEX_ALWAYS_FATAL is not set +# CONFIG_SB1_CERR_STALL is not set CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set @@ -198,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_PREEMPT_NONE=y @@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -353,14 +375,6 @@ CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -443,6 +457,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -582,6 +597,7 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -634,6 +650,7 @@ CONFIG_SENSORS_PCA9539=y CONFIG_SENSORS_PCF8591=y CONFIG_SENSORS_RTC8564=y CONFIG_SENSORS_MAX6875=y +# CONFIG_RTC_X1205_I2C is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y @@ -686,6 +703,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -823,6 +844,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index bfbaa08c47cb..a86cc9d9bdae 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:20 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:39 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -270,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -329,16 +352,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -412,7 +426,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -430,6 +443,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -586,6 +600,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -601,6 +616,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -660,6 +676,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 4b4d1ddb3d42..3558c79b0eb7 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:23 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:42 2005 # CONFIG_MIPS=y @@ -51,6 +51,24 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -172,6 +190,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -316,18 +340,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -401,7 +416,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -419,6 +433,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -574,6 +589,7 @@ CONFIG_COBALT_LCD=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -633,6 +649,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 6501144ec612..3b103fec7b86 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:26 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:04 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -201,7 +220,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set # @@ -259,15 +277,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -293,6 +315,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -343,6 +369,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -400,6 +427,11 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -417,18 +449,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -473,7 +496,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -490,6 +512,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -532,6 +555,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -598,13 +622,17 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -633,11 +661,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -697,6 +728,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index b8cd2cd923dd..79cdd940c6a8 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:29 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:07 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -247,15 +266,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -281,6 +304,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -331,6 +358,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -388,6 +416,11 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -405,18 +438,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -461,7 +485,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -478,6 +501,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -507,6 +531,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -573,13 +598,16 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -608,6 +636,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -650,12 +679,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_AU1100=y # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_AU1100=y # CONFIG_FB_VIRTUAL is not set # @@ -664,6 +692,7 @@ CONFIG_FB_AU1100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -698,6 +727,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 530b6c2d99f6..b6bad69398e1 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:32 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:10 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -200,7 +219,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -255,13 +273,17 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -287,6 +309,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -333,6 +359,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -395,6 +422,11 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -414,16 +446,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -495,6 +518,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -545,6 +569,7 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_MIPS_AU1X00_ENET is not set +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -638,13 +663,17 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -673,11 +702,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -720,12 +752,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_AU1200=y # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_AU1200=y # CONFIG_FB_VIRTUAL is not set # @@ -757,6 +788,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # CONFIG_USB_GADGET=m @@ -862,6 +897,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 1c2784dee697..dbaf189fc9c0 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:36 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:15 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -208,7 +227,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -409,6 +436,11 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -432,18 +464,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -518,7 +541,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -537,7 +559,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -599,6 +623,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -664,13 +689,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -702,12 +731,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -756,12 +788,94 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA MIPS devices +# +CONFIG_SND_AU1X00=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# PCMCIA devices +# # # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS_DRIVER=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set @@ -774,7 +888,7 @@ CONFIG_SOUND_PRIME=y # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_SONICVIBES is not set -CONFIG_SOUND_AU1000=y +# CONFIG_SOUND_AU1000 is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set @@ -815,12 +929,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 64248e2e924a..59c1ef214fc0 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:39 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:18 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -266,15 +284,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -300,6 +322,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -350,6 +376,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -413,6 +440,11 @@ CONFIG_MTD_NAND_AU1550=m # CONFIG_MTD_NAND_NANDSIM is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -435,18 +467,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -550,7 +573,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -569,7 +591,9 @@ CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -639,6 +663,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -704,13 +729,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -742,12 +771,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -801,6 +833,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index b260e51eb517..4ba29e612bdf 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:42 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:04 2005 # CONFIG_MIPS=y @@ -51,6 +51,24 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -261,6 +280,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -292,6 +315,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -321,18 +345,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -412,7 +427,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -430,6 +444,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -443,7 +458,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -591,6 +605,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -633,7 +648,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -642,6 +656,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -658,8 +673,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -689,6 +702,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index c2a01df3c8df..ea4e9046bbee 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:45 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:08 2005 # CONFIG_MIPS=y @@ -51,6 +51,24 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -260,6 +279,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -291,6 +314,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -382,7 +397,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -400,6 +414,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -575,6 +590,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -634,6 +650,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 5bc885b72d14..1ac6c9b7ef96 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:48 2005 +# Linux kernel version: 2.6.14 +# Fri Nov 11 13:29:30 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -318,16 +341,7 @@ CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -365,12 +379,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SCSI_DECNCR=y # CONFIG_SCSI_DECSII is not set # CONFIG_SCSI_SATA is not set @@ -407,7 +422,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -491,10 +505,7 @@ CONFIG_ZS=y # # Non-8250 serial port support # -CONFIG_SERIAL_DZ=y -CONFIG_SERIAL_DZ_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_DZ is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -520,6 +531,7 @@ CONFIG_RTC=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -562,15 +574,14 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_PMAG_AA is not set CONFIG_FB_PMAG_BA=y CONFIG_FB_PMAGB_B=y # CONFIG_FB_MAXINE is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -595,6 +606,10 @@ CONFIG_LOGO_DEC_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -746,6 +761,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index c0d06ea5566c..a89d2f66cdfa 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:51 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:15 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,16 +340,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -403,7 +417,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -427,7 +440,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -552,6 +564,7 @@ CONFIG_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -564,6 +577,7 @@ CONFIG_GPIO_VR41XX=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -623,6 +637,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index f1309d84d2fe..e6c3c27f41fe 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:54 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 11:05:12 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -326,18 +349,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -389,7 +403,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -407,6 +420,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -464,6 +478,7 @@ CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -569,6 +584,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -628,6 +644,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig index 8ac55b7acc01..52ca6bf5be66 100644 --- a/arch/mips/configs/ev96100_defconfig +++ b/arch/mips/configs/ev96100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:57 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:22 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -185,6 +203,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -269,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -323,18 +346,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -379,7 +393,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -518,6 +531,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -576,6 +590,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 3ae3838f283c..79e3fe7e2d54 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:01 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:38:41 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -599,7 +627,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -821,6 +849,10 @@ CONFIG_LOGO_SGI_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index d962f61d5b98..72998ec35b0b 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:04 2005 +# Linux kernel version: 2.6.15-rc1 +# Sun Nov 13 23:56:52 2005 # CONFIG_MIPS=y @@ -60,6 +60,23 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -186,6 +203,7 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=64 CONFIG_PREEMPT_NONE=y @@ -284,10 +302,18 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -300,8 +326,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -310,12 +338,13 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -377,14 +406,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -428,6 +449,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -437,6 +459,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -447,7 +470,6 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLOGIC_1280_1040=y CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set @@ -487,6 +509,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -516,7 +539,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -532,8 +554,12 @@ CONFIG_CICADA_PHY=m # CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_SGI_IOC3_ETH=y +CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y +CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -672,6 +698,7 @@ CONFIG_SGI_IP27_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -725,6 +752,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -762,7 +793,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index bf8fb95b21dc..955e30f1b1ad 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:07 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:32 2005 # CONFIG_MIPS=y @@ -52,6 +52,23 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -271,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -302,6 +324,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -334,14 +357,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -385,6 +400,7 @@ CONFIG_SCSI_SAS_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -399,6 +415,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -432,6 +449,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -461,7 +479,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -480,6 +497,7 @@ CONFIG_NET_ETHERNET=y CONFIG_SGI_O2MACE_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -637,6 +655,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -696,6 +715,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig index 0940771bafb1..f631385217db 100644 --- a/arch/mips/configs/it8172_defconfig +++ b/arch/mips/configs/it8172_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:09 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:42:45 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -266,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -315,6 +338,7 @@ CONFIG_MTD_CHAR=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -373,6 +397,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -390,18 +419,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -467,7 +487,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -609,6 +628,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -669,10 +689,10 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +# CONFIG_OBSOLETE_OSS_DRIVER is not set CONFIG_SOUND_IT8172=y # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_AD1980 is not set # # USB support @@ -681,6 +701,10 @@ CONFIG_SOUND_IT8172=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig index 9ba61dfc490d..8d94ac753e78 100644 --- a/arch/mips/configs/ivr_defconfig +++ b/arch/mips/configs/ivr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:12 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:38 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -324,18 +347,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -409,7 +423,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -427,6 +440,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -539,7 +553,8 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_QTRONIX_KEYBOARD=y -# CONFIG_IT8172_SCR0 is not set +CONFIG_IT8172_SCR0=y +CONFIG_IT8172_SCR1=y # # Serial drivers @@ -583,6 +598,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -642,6 +658,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 21b2b8042f91..a8b4c9a9a63b 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:14 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:41 2005 # CONFIG_MIPS=y @@ -55,6 +55,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -184,6 +202,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set @@ -259,6 +278,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,18 +340,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -380,7 +394,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -398,6 +411,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -592,6 +606,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 9a728c2d8fd5..c0ac5c793ec7 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:17 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:44 2005 # CONFIG_MIPS=y @@ -51,6 +51,24 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -168,6 +186,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -315,18 +339,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -378,7 +393,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -396,6 +410,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -561,6 +576,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -603,7 +619,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -612,6 +627,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -628,8 +644,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -658,6 +672,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index 03cd0ca6e639..f2bd620ff0fa 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:19 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:47 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,6 +340,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -375,6 +399,11 @@ CONFIG_MTD_LASAT=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -396,18 +425,9 @@ CONFIG_MTD_LASAT=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -511,7 +531,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -529,6 +548,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -684,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -743,6 +764,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 2acdec959dd0..e48e1de442b4 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:22 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:42:55 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -197,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -315,6 +334,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -369,6 +392,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -418,6 +442,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -478,10 +503,18 @@ CONFIG_IPDDP_DECAP=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -494,8 +527,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -504,13 +539,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -CONFIG_NET_CLS_IND=y # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +CONFIG_NET_CLS_IND=y +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -572,18 +608,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -680,6 +707,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m @@ -695,6 +723,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -745,6 +774,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -774,7 +804,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -792,6 +821,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -967,6 +997,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -1026,6 +1057,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -1071,7 +1106,7 @@ CONFIG_JFS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index fb9bdd9e3151..04abd1b3202b 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:25 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:55 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -281,10 +300,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -297,8 +324,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -311,6 +340,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set # CONFIG_NET_CLS_POLICE is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -361,16 +391,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -537,6 +558,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -589,6 +611,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -721,6 +747,8 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index e2c082128532..46814be0ac38 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:28 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:12:01 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -210,7 +229,6 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_VRC4173=y # @@ -281,6 +299,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -341,16 +363,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -612,6 +625,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -625,6 +639,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -632,6 +648,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -713,12 +730,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index ffb23fcab862..e12118c30db4 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:30 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:01:36 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODVERSIONS=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set @@ -265,15 +284,19 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -365,16 +392,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -411,12 +429,13 @@ CONFIG_SCSI_PROC_FS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -427,6 +446,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -461,6 +481,7 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -490,7 +511,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -508,6 +528,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -589,6 +610,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -691,6 +713,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -733,7 +756,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -742,6 +764,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -758,8 +781,6 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -768,6 +789,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -794,6 +816,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index d3a5fee02b79..99f0c980aee7 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:33 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:05 2005 # CONFIG_MIPS=y @@ -51,6 +51,23 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -176,6 +193,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -298,6 +320,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -329,14 +352,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -388,7 +403,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -406,6 +420,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -562,6 +577,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -621,6 +637,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index 1edde12ebff9..11c7d74ee1e5 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:35 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:08 2005 # CONFIG_MIPS=y @@ -51,6 +51,24 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -296,6 +319,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -375,7 +390,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -513,6 +527,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -571,6 +586,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index e2d5188cdc15..9ced1a9029d4 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:38 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:11 2005 # CONFIG_MIPS=y @@ -51,6 +51,23 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -270,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -301,6 +323,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -332,14 +355,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -391,7 +406,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -410,6 +424,7 @@ CONFIG_MII=y CONFIG_GALILEO_64240_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -565,6 +580,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -624,6 +640,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 47247addee1b..dbcaa77add7c 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:41 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:12:31 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -203,7 +222,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set # @@ -261,15 +279,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -295,6 +317,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -345,6 +371,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -402,6 +429,11 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -419,18 +451,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -475,7 +498,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -492,6 +514,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_MIPS_AU1X00_ENET is not set +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -526,6 +549,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -592,12 +616,19 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # # CONFIG_SERIAL_AU1X00 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -624,11 +655,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -688,6 +722,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index f91a4eaae51a..5b685ceb6fde 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:44 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:14:25 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set CONFIG_PD6729=m # CONFIG_I82092 is not set -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set CONFIG_PCCARD_NONSTATIC=m @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -409,6 +436,11 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -565,7 +587,9 @@ CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -635,6 +659,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -700,13 +725,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -738,12 +767,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -797,6 +829,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index bbad27cb40a2..f8f32e99f72d 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:47 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:15:34 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set CONFIG_PD6729=m # CONFIG_I82092 is not set -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set CONFIG_PCCARD_NONSTATIC=m @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -409,6 +436,11 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -565,7 +587,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -627,6 +651,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -692,13 +717,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -730,12 +759,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -789,6 +821,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 95f84d711912..5820e5f2295e 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:50 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:25 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -129,7 +147,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -137,7 +155,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -148,10 +166,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -162,11 +181,11 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set # CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_LLDSCD=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -178,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -264,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -324,16 +348,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -422,12 +437,13 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -438,6 +454,7 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -472,6 +489,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -509,6 +527,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -680,6 +699,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -762,12 +782,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1038,6 +1061,8 @@ CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set @@ -1054,7 +1079,31 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1066,4 +1115,4 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index deb24c29ac0a..a4ebb538e15c 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:53 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:38 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -128,7 +146,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -136,7 +154,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -147,10 +165,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -161,6 +180,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_ADVANCED=y @@ -178,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -253,13 +274,17 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -291,6 +316,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -350,16 +379,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -449,12 +469,13 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -470,6 +491,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -504,6 +526,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -541,6 +564,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -620,6 +644,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -744,6 +769,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -794,6 +820,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -870,7 +897,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -879,6 +905,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -895,8 +922,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -945,12 +970,15 @@ CONFIG_USB_DEVICEFS=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1234,7 +1262,31 @@ CONFIG_CMDLINE="" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1246,6 +1298,6 @@ CONFIG_CMDLINE="" CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 741a9a971367..5d39162077f4 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:56 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:31 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -168,6 +186,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -234,6 +253,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -265,6 +288,7 @@ CONFIG_STANDALONE=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -289,16 +313,7 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set # CONFIG_ATA_OVER_ETH is not set # @@ -353,7 +368,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -385,7 +399,6 @@ CONFIG_NET_ISA=y # CONFIG_ETH16I is not set CONFIG_NE2000=y # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -558,6 +571,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 2bc61ca4ba08..047e0b4236f8 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:59 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:45 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -188,6 +206,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,15 +284,19 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -355,6 +382,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -412,6 +440,11 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -438,16 +471,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -556,7 +580,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -574,6 +597,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -619,7 +643,6 @@ CONFIG_NET_PCI=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_LAN_SAA9730 is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -668,7 +691,6 @@ CONFIG_NET_RADIO=y # CONFIG_IPW2100 is not set # CONFIG_IPW_DEBUG is not set CONFIG_IPW2200=m -# CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set @@ -692,6 +714,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -804,6 +827,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -847,7 +871,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -856,6 +879,7 @@ CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -876,8 +900,6 @@ CONFIG_FB_ATY_CT=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -927,12 +949,15 @@ CONFIG_USB=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -1107,6 +1132,7 @@ CONFIG_RELAYFS_FS=m CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 988a05824f01..55458062352e 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:03 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:50 2005 # CONFIG_MIPS=y @@ -59,6 +59,24 @@ CONFIG_MODVERSIONS=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -190,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -272,6 +291,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -325,6 +348,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -374,6 +398,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -430,10 +455,18 @@ CONFIG_DECNET=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -446,8 +479,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -456,13 +491,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -583,18 +619,9 @@ CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -638,6 +665,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -651,6 +679,7 @@ CONFIG_SCSI_SAS_ATTRS=m CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set @@ -723,6 +752,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -752,7 +782,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -770,6 +799,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -984,6 +1014,7 @@ CONFIG_RTC=m # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -1074,12 +1105,15 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1196,6 +1230,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m @@ -1271,7 +1306,7 @@ CONFIG_REISERFS_FS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 4365d9c8c42e..dc453a1e4806 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:05 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:43 2005 # CONFIG_MIPS=y @@ -59,6 +59,23 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -126,8 +143,8 @@ CONFIG_CPU_SB1_PASS_1=y # CONFIG_CPU_SB1_PASS_3 is not set CONFIG_SIBYTE_HAS_LDT=y # CONFIG_SIMULATION is not set -# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set -# CONFIG_CONFIG_SB1_CERR_STALL is not set +# CONFIG_SB1_CEX_ALWAYS_FATAL is not set +# CONFIG_SB1_CERR_STALL is not set CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set @@ -200,6 +217,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT_NONE=y @@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -359,14 +381,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -441,7 +455,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -459,6 +472,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -599,6 +613,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -652,6 +667,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index d835f6db1f41..aa27d583162d 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:07 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:45 2005 # CONFIG_MIPS=y @@ -48,6 +48,24 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -242,18 +261,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=18432 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set # -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y - -# # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set @@ -353,6 +363,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -404,6 +415,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index bf60a17de2b0..ddc7e45996f2 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:10 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:49 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -277,6 +296,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -339,16 +362,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -385,12 +399,13 @@ CONFIG_SCSI_MULTI_LUN=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -401,6 +416,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -435,6 +451,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -464,7 +481,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -482,6 +498,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -634,6 +651,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -650,6 +668,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -733,12 +752,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index ac8b64e87b8a..e8c82f011e98 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:13 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 11:11:47 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -278,6 +297,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -341,18 +364,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -404,7 +418,6 @@ CONFIG_DUMMY=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -422,6 +435,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -504,6 +518,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y @@ -589,6 +604,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -605,6 +621,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -688,12 +705,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index ab13621ef3b9..125b2997abfe 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:16 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:17:02 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -273,6 +292,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -328,16 +351,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -415,7 +429,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -439,7 +452,6 @@ CONFIG_MII=m # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -577,6 +589,7 @@ CONFIG_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -588,12 +601,15 @@ CONFIG_WATCHDOG=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_GPIO_VR41XX is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -653,6 +669,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 5b0b7f30e205..d90790b2ab30 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:18 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:59 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -181,6 +199,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT_NONE=y @@ -260,6 +279,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -319,18 +342,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -382,7 +396,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -400,6 +413,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -576,6 +590,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -690,6 +708,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c index f5b11508ff2f..995896ac0e39 100644 --- a/arch/mips/ddb5xxx/common/rtc_ds1386.c +++ b/arch/mips/ddb5xxx/common/rtc_ds1386.c @@ -41,7 +41,9 @@ rtc_ds1386_get_time(void) u8 byte; u8 temp; unsigned int year, month, day, hour, minute, second; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* let us freeze external registers */ byte = READ_RTC(0xB); byte &= 0x3f; @@ -60,6 +62,7 @@ rtc_ds1386_get_time(void) /* enable time transfer */ byte |= 0x80; WRITE_RTC(0xB, byte); + spin_unlock_irqrestore(&rtc_lock, flags); /* calc hour */ if (temp & 0x40) { @@ -81,7 +84,9 @@ rtc_ds1386_set_time(unsigned long t) u8 byte; u8 temp; u8 year, month, day, hour, minute, second; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* let us freeze external registers */ byte = READ_RTC(0xB); byte &= 0x3f; @@ -133,6 +138,7 @@ rtc_ds1386_set_time(unsigned long t) if (second != READ_RTC(0x1)) { WRITE_RTC(0x1, second); } + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.c b/arch/mips/ddb5xxx/ddb5477/lcd44780.c index 35c6c22610c5..9510b9ae6453 100644 --- a/arch/mips/ddb5xxx/ddb5477/lcd44780.c +++ b/arch/mips/ddb5xxx/ddb5477/lcd44780.c @@ -55,7 +55,7 @@ void lcd44780_data(unsigned char c) void lcd44780_puts(const char* s) { - int i,j; + int j; int pos = 0; lcd44780_command(LCD44780_CLEAR); @@ -76,8 +76,12 @@ void lcd44780_puts(const char* s) } } #ifdef LCD44780_PUTS_PAUSE - for(i = 1; i < 2000; i++) - lcd44780_wait(); + { + int i; + + for(i = 1; i < 2000; i++) + lcd44780_wait(); + } #endif } diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index dc7091caa7aa..174822344131 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -37,10 +37,25 @@ #include <asm/dec/machtype.h> +/* + * Returns true if a clock update is in progress + */ +static inline unsigned char dec_rtc_is_updating(void) +{ + unsigned char uip; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP); + spin_unlock_irqrestore(&rtc_lock, flags); + return uip; +} + static unsigned long dec_rtc_get_time(void) { unsigned int year, mon, day, hour, min, sec, real_year; int i; + unsigned long flags; /* The Linux interpretation of the DS1287 clock register contents: * When the Update-In-Progress (UIP) flag goes from 1 to 0, the @@ -49,11 +64,12 @@ static unsigned long dec_rtc_get_time(void) */ /* read RTC exactly on falling edge of update flag */ for (i = 0; i < 1000000; i++) /* may take up to 1 second... */ - if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) + if (dec_rtc_is_updating()) break; for (i = 0; i < 1000000; i++) /* must try at least 2.228 ms */ - if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) + if (!dec_rtc_is_updating()) break; + spin_lock_irqsave(&rtc_lock, flags); /* Isn't this overkill? UIP above should guarantee consistency */ do { sec = CMOS_READ(RTC_SECONDS); @@ -77,6 +93,7 @@ static unsigned long dec_rtc_get_time(void) * of unused BBU RAM locations. */ real_year = CMOS_READ(RTC_DEC_YEAR); + spin_unlock_irqrestore(&rtc_lock, flags); year += real_year - 72 + 2000; return mktime(year, mon, day, hour, min, sec); @@ -95,6 +112,8 @@ static int dec_rtc_set_mmss(unsigned long nowtime) int real_seconds, real_minutes, cmos_minutes; unsigned char save_control, save_freq_select; + /* irq are locally disabled here */ + spin_lock(&rtc_lock); /* tell the clock it's being set */ save_control = CMOS_READ(RTC_CONTROL); CMOS_WRITE((save_control | RTC_SET), RTC_CONTROL); @@ -141,6 +160,7 @@ static int dec_rtc_set_mmss(unsigned long nowtime) */ CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock(&rtc_lock); return retval; } diff --git a/arch/mips/defconfig b/arch/mips/defconfig index 4b585e642c2a..e9086da02e48 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:09 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 12:13:58 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Machine selection # # CONFIG_MIPS_MTX1 is not set @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -599,7 +627,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -821,6 +849,10 @@ CONFIG_LOGO_SGI_CLUT224=y # CONFIG_USB_ARCH_HAS_OHCI is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index 1ae4318e1358..9a8bff153d80 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -41,11 +41,11 @@ #include <linux/types.h> #include <linux/time.h> #include <linux/rtc.h> +#include <linux/ds1742rtc.h> #include <asm/time.h> #include <asm/addrspace.h> -#include <asm/jmr3927/ds1742rtc.h> #include <asm/debug.h> #define EPOCH 2000 @@ -57,7 +57,9 @@ rtc_ds1742_get_time(void) { unsigned int year, month, day, hour, minute, second; unsigned int century; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(RTC_READ, RTC_CONTROL); second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); minute = BCD2BIN(CMOS_READ(RTC_MINUTES)); @@ -67,6 +69,7 @@ rtc_ds1742_get_time(void) year = BCD2BIN(CMOS_READ(RTC_YEAR)); century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK); CMOS_WRITE(0, RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); year += century * 100; @@ -81,7 +84,9 @@ rtc_ds1742_set_time(unsigned long t) u8 year, month, day, hour, minute, second; u8 cmos_year, cmos_month, cmos_day, cmos_hour, cmos_minute, cmos_second; int cmos_century; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(RTC_READ, RTC_CONTROL); cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); cmos_minute = (u8)CMOS_READ(RTC_MINUTES); @@ -139,6 +144,7 @@ rtc_ds1742_set_time(unsigned long t) /* RTC_CENTURY and RTC_CONTROL share same address... */ CMOS_WRITE(cmos_century, RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 3e2fbdc66097..55ad0a578794 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -357,7 +357,7 @@ static void __init jmr3927_board_init(void) jmr3927_io_dipsw()); } -void __init plat_setup(void) +void __init tx3927_setup(void) { int i; diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c index ed9b2da510be..9ea1fc748864 100644 --- a/arch/mips/kernel/ioctl32.c +++ b/arch/mips/kernel/ioctl32.c @@ -26,10 +26,8 @@ long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg); #define CODE #include "compat_ioctl.c" -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 908e63684208..dd118c60bcd0 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -502,8 +502,7 @@ asmlinkage int irix_sigpoll_sys(unsigned long __user *set, while(1) { long tmp = 0; - current->state = TASK_INTERRUPTIBLE; - expire = schedule_timeout(expire); + expire = schedule_timeout_interruptible(expire); for (i=0; i<=4; i++) tmp |= (current->pending.signal.sig[i] & kset.sig[i]); diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 4fe3d5715c41..dd725779d91f 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -52,7 +52,9 @@ ATTRIB_NORET void cpu_idle(void) while (!need_resched()) if (cpu_wait) (*cpu_wait)(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index f1b0f3e1f95b..510da5fda567 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -174,51 +174,10 @@ int ptrace_setfpregs (struct task_struct *child, __u32 __user *data) return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; -#if 0 - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - if ((ret = security_ptrace(current->parent, current))) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -319,7 +278,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } if (child->thread.dsp.used_dsp) { dregs = __get_dsp_regs(child); @@ -333,14 +292,14 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } tmp = child->thread.dsp.dspcontrol; break; default: tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } ret = put_user(tmp, (unsigned long __user *) data); break; @@ -495,11 +454,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return ret; } diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 8c81f3cb4e2d..1d855112bac2 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -20,42 +20,42 @@ #include <linux/module.h> #include <linux/fs.h> #include <linux/init.h> -#include <asm/uaccess.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/vmalloc.h> -#include <linux/elf.h> -#include <linux/seq_file.h> -#include <linux/syscalls.h> -#include <linux/moduleloader.h> -#include <linux/interrupt.h> #include <linux/poll.h> #include <linux/sched.h> #include <linux/wait.h> #include <asm/mipsmtregs.h> -#include <asm/cacheflush.h> -#include <asm/atomic.h> +#include <asm/bitops.h> #include <asm/cpu.h> #include <asm/processor.h> -#include <asm/system.h> #include <asm/rtlx.h> +#include <asm/uaccess.h> -#define RTLX_MAJOR 64 #define RTLX_TARG_VPE 1 -struct rtlx_info *rtlx; +static struct rtlx_info *rtlx; static int major; static char module_name[] = "rtlx"; -static inline int spacefree(int read, int write, int size); +static struct irqaction irq; +static int irq_num; + +static inline int spacefree(int read, int write, int size) +{ + if (read == write) { + /* + * never fill the buffer completely, so indexes are always + * equal if empty and only empty, or !equal if data available + */ + return size - 1; + } + + return ((read + size - write) % size) - 1; +} static struct chan_waitqueues { wait_queue_head_t rt_queue; wait_queue_head_t lx_queue; } channel_wqs[RTLX_CHANNELS]; -static struct irqaction irq; -static int irq_num; - extern void *vpe_get_shared(int index); static void rtlx_dispatch(struct pt_regs *regs) @@ -63,9 +63,8 @@ static void rtlx_dispatch(struct pt_regs *regs) do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs); } -irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - irqreturn_t r = IRQ_HANDLED; int i; for (i = 0; i < RTLX_CHANNELS; i++) { @@ -75,30 +74,7 @@ irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) wake_up_interruptible(&channel_wqs[i].lx_queue); } - return r; -} - -void dump_rtlx(void) -{ - int i; - - printk("id 0x%lx state %d\n", rtlx->id, rtlx->state); - - for (i = 0; i < RTLX_CHANNELS; i++) { - struct rtlx_channel *chan = &rtlx->channel[i]; - - printk(" rt_state %d lx_state %d buffer_size %d\n", - chan->rt_state, chan->lx_state, chan->buffer_size); - - printk(" rt_read %d rt_write %d\n", - chan->rt_read, chan->rt_write); - - printk(" lx_read %d lx_write %d\n", - chan->lx_read, chan->lx_write); - - printk(" rt_buffer <%s>\n", chan->rt_buffer); - printk(" lx_buffer <%s>\n", chan->lx_buffer); - } + return IRQ_HANDLED; } /* call when we have the address of the shared structure from the SP side. */ @@ -108,7 +84,7 @@ static int rtlx_init(struct rtlx_info *rtlxi) if (rtlxi->id != RTLX_ID) { printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi); - return (-ENOEXEC); + return -ENOEXEC; } /* initialise the wait queues */ @@ -120,9 +96,8 @@ static int rtlx_init(struct rtlx_info *rtlxi) /* set up for interrupt handling */ memset(&irq, 0, sizeof(struct irqaction)); - if (cpu_has_vint) { + if (cpu_has_vint) set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); - } irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; irq.handler = rtlx_interrupt; @@ -132,7 +107,8 @@ static int rtlx_init(struct rtlx_info *rtlxi) setup_irq(irq_num, &irq); rtlx = rtlxi; - return (0); + + return 0; } /* only allow one open process at a time to open each channel */ @@ -147,36 +123,36 @@ static int rtlx_open(struct inode *inode, struct file *filp) if (rtlx == NULL) { struct rtlx_info **p; if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { - printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n"); - return (-EFAULT); + printk(KERN_ERR "vpe_get_shared is NULL. " + "Has an SP program been loaded?\n"); + return -EFAULT; } if (*p == NULL) { - printk(" vpe_shared %p %p\n", p, *p); - return (-EFAULT); + printk(KERN_ERR "vpe_shared %p %p\n", p, *p); + return -EFAULT; } if ((ret = rtlx_init(*p)) < 0) - return (ret); + return ret; } chan = &rtlx->channel[minor]; - /* already open? */ - if (chan->lx_state == RTLX_STATE_OPENED) - return (-EBUSY); + if (test_and_set_bit(RTLX_STATE_OPENED, &chan->lx_state)) + return -EBUSY; - chan->lx_state = RTLX_STATE_OPENED; - return (0); + return 0; } static int rtlx_release(struct inode *inode, struct file *filp) { - int minor; + int minor = MINOR(inode->i_rdev); - minor = MINOR(inode->i_rdev); - rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED; - return (0); + clear_bit(RTLX_STATE_OPENED, &rtlx->channel[minor].lx_state); + smp_mb__after_clear_bit(); + + return 0; } static unsigned int rtlx_poll(struct file *file, poll_table * wait) @@ -199,12 +175,13 @@ static unsigned int rtlx_poll(struct file *file, poll_table * wait) if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size)) mask |= POLLOUT | POLLWRNORM; - return (mask); + return mask; } static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, loff_t * ppos) { + unsigned long failed; size_t fl = 0L; int minor; struct rtlx_channel *lx; @@ -216,7 +193,7 @@ static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, /* data available? */ if (lx->lx_write == lx->lx_read) { if (file->f_flags & O_NONBLOCK) - return (0); // -EAGAIN makes cat whinge + return 0; /* -EAGAIN makes cat whinge */ /* go to sleep */ add_wait_queue(&channel_wqs[minor].lx_queue, &wait); @@ -232,39 +209,39 @@ static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, } /* find out how much in total */ - count = min( count, - (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); + count = min(count, + (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); /* then how much from the read pointer onwards */ - fl = min( count, (size_t)lx->buffer_size - lx->lx_read); + fl = min(count, (size_t)lx->buffer_size - lx->lx_read); - copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + failed = copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + if (failed) { + count = fl - failed; + goto out; + } /* and if there is anything left at the beginning of the buffer */ - if ( count - fl ) - copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + if (count - fl) { + failed = copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + if (failed) { + count -= failed; + goto out; + } + } +out: /* update the index */ lx->lx_read += count; lx->lx_read %= lx->buffer_size; - return (count); -} - -static inline int spacefree(int read, int write, int size) -{ - if (read == write) { - /* never fill the buffer completely, so indexes are always equal if empty - and only empty, or !equal if data available */ - return (size - 1); - } - - return ((read + size - write) % size) - 1; + return count; } static ssize_t rtlx_write(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { + unsigned long failed; int minor; struct rtlx_channel *rt; size_t fl; @@ -277,7 +254,7 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) { if (file->f_flags & O_NONBLOCK) - return (-EAGAIN); + return -EAGAIN; add_wait_queue(&channel_wqs[minor].rt_queue, &wait); set_current_state(TASK_INTERRUPTIBLE); @@ -290,52 +267,64 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, } /* total number of bytes to copy */ - count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); + count = min(count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); /* first bit from write pointer to the end of the buffer, or count */ fl = min(count, (size_t) rt->buffer_size - rt->rt_write); - copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + failed = copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + if (failed) { + count = fl - failed; + goto out; + } /* if there's any left copy to the beginning of the buffer */ - if( count - fl ) - copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + if (count - fl) { + failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + if (failed) { + count -= failed; + goto out; + } + } +out: rt->rt_write += count; rt->rt_write %= rt->buffer_size; - return(count); + return count; } static struct file_operations rtlx_fops = { - .owner = THIS_MODULE, - .open = rtlx_open, - .release = rtlx_release, - .write = rtlx_write, - .read = rtlx_read, - .poll = rtlx_poll + .owner = THIS_MODULE, + .open = rtlx_open, + .release = rtlx_release, + .write = rtlx_write, + .read = rtlx_read, + .poll = rtlx_poll }; -static int rtlx_module_init(void) +static char register_chrdev_failed[] __initdata = + KERN_ERR "rtlx_module_init: unable to register device\n"; + +static int __init rtlx_module_init(void) { - if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) { - printk("rtlx_module_init: unable to register device\n"); - return (-EBUSY); + major = register_chrdev(0, module_name, &rtlx_fops); + if (major < 0) { + printk(register_chrdev_failed); + return major; } - if (major == 0) - major = RTLX_MAJOR; - - return (0); + return 0; } -static void rtlx_module_exit(void) +static void __exit rtlx_module_exit(void) { unregister_chrdev(major, module_name); } module_init(rtlx_module_init); module_exit(rtlx_module_exit); + MODULE_DESCRIPTION("MIPS RTLX"); -MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc"); +MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc."); MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 9202a17db8f7..05e09eedabff 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -384,9 +384,6 @@ give_sigsegv: return 0; } -extern void setup_rt_frame_n32(struct k_sigaction * ka, - struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info); - static inline int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index dbe821303125..e315d3f6aa6e 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -647,8 +647,8 @@ static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, return (void *)((sp - frame_size) & ALMASK); } -void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set) +int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, + int signr, sigset_t *set) { struct sigframe *frame; int err = 0; @@ -694,13 +694,15 @@ void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, current->comm, current->pid, frame, regs->cp0_epc, frame->sf_code); #endif - return; + return 1; give_sigsegv: force_sigsegv(signr, current); + return 0; } -void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) +int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, + int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe32 *frame; int err = 0; @@ -763,10 +765,11 @@ void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, current->comm, current->pid, frame, regs->cp0_epc, frame->rs_code); #endif - return; + return 1; give_sigsegv: force_sigsegv(signr, current); + return 0; } static inline int handle_signal(unsigned long sig, siginfo_t *info, diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index fcacf1aae98a..25472fcaf715 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -82,7 +82,7 @@ extern ATTRIB_NORET void cpu_idle(void); */ asmlinkage void start_secondary(void) { - unsigned int cpu = smp_processor_id(); + unsigned int cpu; cpu_probe(); cpu_report(); @@ -95,6 +95,8 @@ asmlinkage void start_secondary(void) */ calibrate_delay(); + preempt_disable(); + cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy; prom_smp_finish(); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 97fefcc9dbe7..06be405be399 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -58,10 +58,6 @@ typedef void *vpe_handle; -// defined here because the kernel module loader doesn't have -// anything to do with it. -#define SHN_MIPS_SCOMMON 0xff03 - #ifndef ARCH_SHF_SMALL #define ARCH_SHF_SMALL 0 #endif @@ -69,11 +65,8 @@ typedef void *vpe_handle; /* If this is set, the section belongs in the init part of the module */ #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) -// temp number, -#define VPE_MAJOR 63 - static char module_name[] = "vpe"; -static int major = 0; +static int major; /* grab the likely amount of memory we will need. */ #ifdef CONFIG_MIPS_VPE_LOADER_TOM @@ -98,22 +91,7 @@ enum tc_state { TC_STATE_DYNAMIC }; -struct vpe; -typedef struct tc { - enum tc_state state; - int index; - - /* parent VPE */ - struct vpe *pvpe; - - /* The list of TC's with this VPE */ - struct list_head tc; - - /* The global list of tc's */ - struct list_head list; -} tc_t; - -typedef struct vpe { +struct vpe { enum vpe_state state; /* (device) minor associated with this vpe */ @@ -135,7 +113,21 @@ typedef struct vpe { /* shared symbol address */ void *shared_ptr; -} vpe_t; +}; + +struct tc { + enum tc_state state; + int index; + + /* parent VPE */ + struct vpe *pvpe; + + /* The list of TC's with this VPE */ + struct list_head tc; + + /* The global list of tc's */ + struct list_head list; +}; struct vpecontrol_ { /* Virtual processing elements */ @@ -146,7 +138,7 @@ struct vpecontrol_ { } vpecontrol; static void release_progmem(void *ptr); -static void dump_vpe(vpe_t * v); +static void dump_vpe(struct vpe * v); extern void save_gp_address(unsigned int secbase, unsigned int rel); /* get the vpe associated with this minor */ @@ -197,13 +189,11 @@ struct vpe *alloc_vpe(int minor) { struct vpe *v; - if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { + if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "VPE: alloc_vpe no mem\n"); return NULL; } - memset(v, 0, sizeof(struct vpe)); - INIT_LIST_HEAD(&v->tc); list_add_tail(&v->list, &vpecontrol.vpe_list); @@ -216,13 +206,11 @@ struct tc *alloc_tc(int index) { struct tc *t; - if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { + if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "VPE: alloc_tc no mem\n"); return NULL; } - memset(t, 0, sizeof(struct tc)); - INIT_LIST_HEAD(&t->tc); list_add_tail(&t->list, &vpecontrol.tc_list); @@ -412,16 +400,17 @@ static int apply_r_mips_26(struct module *me, uint32_t *location, return -ENOEXEC; } -/* Not desperately convinced this is a good check of an overflow condition - anyway. But it gets in the way of handling undefined weak symbols which - we want to set to zero. - if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { - printk(KERN_ERR - "module %s: relocation overflow\n", - me->name); - return -ENOEXEC; - } -*/ +/* + * Not desperately convinced this is a good check of an overflow condition + * anyway. But it gets in the way of handling undefined weak symbols which + * we want to set to zero. + * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + * printk(KERN_ERR + * "module %s: relocation overflow\n", + * me->name); + * return -ENOEXEC; + * } + */ *location = (*location & ~0x03ffffff) | ((*location + (v >> 2)) & 0x03ffffff); @@ -681,7 +670,7 @@ static void dump_tclist(void) } /* We are prepared so configure and start the VPE... */ -int vpe_run(vpe_t * v) +int vpe_run(struct vpe * v) { unsigned long val; struct tc *t; @@ -772,7 +761,7 @@ int vpe_run(vpe_t * v) return 0; } -static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, +static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, unsigned int symindex, const char *strtab, struct module *mod) { @@ -792,10 +781,12 @@ static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, return 0; } -/* Allocates a VPE with some program code space(the load address), copies the contents - of the program (p)buffer performing relocatations/etc, free's it when finished. +/* + * Allocates a VPE with some program code space(the load address), copies + * the contents of the program (p)buffer performing relocatations/etc, + * free's it when finished. */ -int vpe_elfload(vpe_t * v) +int vpe_elfload(struct vpe * v) { Elf_Ehdr *hdr; Elf_Shdr *sechdrs; @@ -931,7 +922,7 @@ cleanup: return err; } -static void dump_vpe(vpe_t * v) +static void dump_vpe(struct vpe * v) { struct tc *t; @@ -947,7 +938,7 @@ static void dump_vpe(vpe_t * v) static int vpe_open(struct inode *inode, struct file *filp) { int minor; - vpe_t *v; + struct vpe *v; /* assume only 1 device at the mo. */ if ((minor = MINOR(inode->i_rdev)) != 1) { @@ -1001,7 +992,7 @@ static int vpe_open(struct inode *inode, struct file *filp) static int vpe_release(struct inode *inode, struct file *filp) { int minor, ret = 0; - vpe_t *v; + struct vpe *v; Elf_Ehdr *hdr; minor = MINOR(inode->i_rdev); @@ -1035,7 +1026,7 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, { int minor; size_t ret = count; - vpe_t *v; + struct vpe *v; minor = MINOR(file->f_dentry->d_inode->i_rdev); if ((v = get_vpe(minor)) == NULL) @@ -1180,14 +1171,11 @@ static int __init vpe_module_init(void) return -ENODEV; } - if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) { + if ((major = register_chrdev(0, module_name, &vpe_fops) < 0)) { printk("VPE loader: unable to register character device\n"); - return -EBUSY; + return major; } - if (major == 0) - major = VPE_MAJOR; - dmt(); dvpe(); diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c index 9d7812e03dcd..7dced67c55eb 100644 --- a/arch/mips/lasat/ds1603.c +++ b/arch/mips/lasat/ds1603.c @@ -8,6 +8,7 @@ #include <asm/lasat/lasat.h> #include <linux/delay.h> #include <asm/lasat/ds1603.h> +#include <asm/time.h> #include "ds1603.h" @@ -138,19 +139,27 @@ static void rtc_end_op(void) unsigned long ds1603_read(void) { unsigned long word; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); rtc_init_op(); rtc_write_byte(READ_TIME_CMD); word = rtc_read_word(); rtc_end_op(); + spin_unlock_irqrestore(&rtc_lock, flags); return word; } int ds1603_set(unsigned long time) { + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); rtc_init_op(); rtc_write_byte(SET_TIME_CMD); rtc_write_word(time); rtc_end_op(); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c index e1dd7e009750..90fda0d9915f 100644 --- a/arch/mips/mips-boards/sead/sead_int.c +++ b/arch/mips/mips-boards/sead/sead_int.c @@ -30,19 +30,9 @@ extern asmlinkage void mipsIRQ(void); -asmlinkage void sead_hw0_irqdispatch(struct pt_regs *regs) -{ - do_IRQ(SEADINT_UART0, regs); -} - -asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs) -{ - do_IRQ(SEADINT_UART1, regs); -} - void __init arch_init_irq(void) { - mips_cpu_irq_init(0); + mips_cpu_irq_init(MIPSCPU_INT_BASE); /* Now safe to set the exception vector. */ set_except_vector(0, mipsIRQ); diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index de90bec5505e..f966bc161dfa 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -45,7 +45,7 @@ const char *get_system_type(void) return "MIPS SEAD"; } -static void __init sead_setup(void) +void __init plat_setup(void) { ioport_resource.end = 0x7fffffff; @@ -69,7 +69,7 @@ static void __init serial_init(void) #else s.iobase = SEAD_UART0_REGS_BASE+3; #endif - s.irq = SEADINT_UART0; + s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0; s.uartclk = SEAD_BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; s.iotype = 0; diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 768bf4406452..bab192ddc185 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -149,7 +149,9 @@ arch_initcall(per_cpu_mappings); unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -166,6 +168,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -173,11 +176,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -201,6 +206,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index a7803e08f9db..c9b7ff8148ec 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -135,7 +135,9 @@ void setup_wired_tlb_entries(void) unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -152,6 +154,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -159,11 +162,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -187,6 +192,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index ce70fc96f160..2755c1547473 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -140,7 +140,9 @@ unsigned long m48t37y_get_time(void) unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -157,6 +159,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -169,11 +172,13 @@ int m48t37y_set_time(unsigned long sec) unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -197,6 +202,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c index d0b5c9dd0ea4..e5eceed1beff 100644 --- a/arch/mips/momentum/ocelot_g/gt-irq.c +++ b/arch/mips/momentum/ocelot_g/gt-irq.c @@ -178,7 +178,7 @@ void gt64240_time_init(void) timer.name = "timer"; timer.dev_id = NULL; timer.next = NULL; - timer.mask = 0; + timer.mask = CPU_MASK_NONE; irq_desc[6].action = &timer; enable_irq(6); diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 7b7468304022..741e67c9195a 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_MIPS_GT96100) += ops-gt96100.o obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o -obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o +obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 0e0daadc303d..42530a0b84b3 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -72,13 +72,9 @@ static inline int check_abort(void) static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - int ret, busno; + int ret; - /* check if the bus is top-level */ - if (bus->parent != NULL) - busno = bus->number; - - ret = mkaddr(busno, devfn, where); + ret = mkaddr(bus->number, devfn, where); if (ret) return ret; @@ -102,15 +98,9 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - int ret, busno; - - /* check if the bus is top-level */ - if (bus->parent != NULL) - bus = bus->number; - else - bus = 0; + int ret; - ret = mkaddr(busno, devfn, where); + ret = mkaddr(bus->number, devfn, where); if (ret) return ret; @@ -120,7 +110,7 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, break; case 2: - *(volatile u16 *) (unsigned longulong) & tx3927_pcicptr->icd | (where & 2)) = + *(volatile u16 *) ((unsigned long) & tx3927_pcicptr->icd | (where & 2)) = cpu_to_le16(val); break; @@ -137,8 +127,8 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, } struct pci_ops jmr3927_pci_ops = { - jmr3927_pcibios_read_config, - jmr3927_pcibios_write_config, + jmr3927_pci_read_config, + jmr3927_pci_write_config, }; @@ -159,15 +149,14 @@ unsigned long tc_readl(volatile __u32 * addr) { unsigned long val; - addr = PHYSADDR(addr); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = - (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = + (unsigned long) CPHYSADDR(addr); + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); /* clear by setting */ tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; @@ -176,12 +165,11 @@ unsigned long tc_readl(volatile __u32 * addr) void tc_writel(unsigned long data, volatile __u32 * addr) { - addr = PHYSADDR(addr); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = cpu_to_le32(data); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = - (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = + (unsigned long) CPHYSADDR(addr); + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); @@ -198,21 +186,15 @@ unsigned char tx_ioinb(unsigned char *addr) ioaddr = (unsigned long) addr; offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x7; - else if (offset == 1) - byte = 0xb; - else if (offset == 2) - byte = 0xd; - else if (offset == 3) - byte = 0xe; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + byte = 0xf & ~(8 >> offset); + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); val = val & 0xff; /* clear by setting */ @@ -229,18 +211,12 @@ void tx_iooutb(unsigned long data, unsigned char *addr) data = data | (data << 8) | (data << 16) | (data << 24); ioaddr = (unsigned long) addr; offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x7; - else if (offset == 1) - byte = 0xb; - else if (offset == 2) - byte = 0xd; - else if (offset == 3) - byte = 0xe; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + byte = 0xf & ~(8 >> offset); + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data; + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); /* clear by setting */ @@ -255,18 +231,16 @@ unsigned short tx_ioinw(unsigned short *addr) int byte; ioaddr = (unsigned long) addr; - offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x3; - else if (offset == 2) - byte = 0xc; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + offset = ioaddr & 0x2; + byte = 3 << offset; + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); val = val & 0xffff; /* clear by setting */ @@ -283,15 +257,13 @@ void tx_iooutw(unsigned long data, unsigned short *addr) data = data | (data << 16); ioaddr = (unsigned long) addr; - offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x3; - else if (offset == 2) - byte = 0xc; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + offset = ioaddr & 0x2; + byte = 3 << offset; + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data; + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); /* clear by setting */ @@ -304,14 +276,14 @@ unsigned long tx_ioinl(unsigned int *addr) __u32 ioaddr; ioaddr = (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); /* clear by setting */ tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; @@ -323,11 +295,11 @@ void tx_iooutl(unsigned long data, unsigned int *addr) __u32 ioaddr; ioaddr = (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = cpu_to_le32(data); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c index 95a028769e56..f02ef6e36b02 100644 --- a/arch/mips/pci/pci-jmr3927.c +++ b/arch/mips/pci/pci-jmr3927.c @@ -54,5 +54,5 @@ struct pci_controller jmr3927_controller = { .pci_ops = &jmr3927_pci_ops, .io_resource = &pci_io_resource, .mem_resource = &pci_mem_resource, - .mem_offset = JMR3927_PCIMEM; + .mem_offset = JMR3927_PCIMEM }; diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index bdc2ab55bed6..059755b5ed57 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -73,7 +73,9 @@ void __init bus_error_init(void) unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* Stop the update to the time */ m48t37_base->control = 0x40; @@ -88,6 +90,7 @@ unsigned long m48t37y_get_time(void) /* Start the update to the time again */ m48t37_base->control = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -95,11 +98,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ m48t37_base->control = 0x80; @@ -123,6 +128,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ m48t37_base->control = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index df9b5694328a..b7300cc5c5ad 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -35,7 +35,9 @@ static unsigned long indy_rtc_get_time(void) { unsigned int yrs, mon, day, hrs, min, sec; unsigned int save_control; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff; hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE; @@ -47,6 +49,7 @@ static unsigned long indy_rtc_get_time(void) yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff); hpc3c0->rtcregs[RTC_CMD] = save_control; + spin_unlock_irqrestore(&rtc_lock, flags); if (yrs < 45) yrs += 30; @@ -60,6 +63,7 @@ static int indy_rtc_set_time(unsigned long tim) { struct rtc_time tm; unsigned int save_control; + unsigned long flags; to_tm(tim, &tm); @@ -68,6 +72,7 @@ static int indy_rtc_set_time(unsigned long tim) if (tm.tm_year >= 100) tm.tm_year -= 100; + spin_lock_irqsave(&rtc_lock, flags); save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff; hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE; @@ -80,6 +85,7 @@ static int indy_rtc_set_time(unsigned long tim) hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0; hpc3c0->rtcregs[RTC_CMD] = save_control; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/sgi-ip32/crime.c b/arch/mips/sgi-ip32/crime.c index eb3a16a04fee..41b5eca1148c 100644 --- a/arch/mips/sgi-ip32/crime.c +++ b/arch/mips/sgi-ip32/crime.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <asm/bootinfo.h> #include <asm/io.h> #include <asm/mipsregs.h> @@ -18,8 +19,10 @@ #include <asm/ip32/crime.h> #include <asm/ip32/mace.h> -struct sgi_crime *crime; -struct sgi_mace *mace; +struct sgi_crime __iomem *crime; +struct sgi_mace __iomem *mace; + +EXPORT_SYMBOL_GPL(mace); void __init crime_init(void) { diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c index 5b4fc26c1b36..c13914bdda59 100644 --- a/arch/mips/sibyte/swarm/rtc_m41t81.c +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -144,6 +144,7 @@ static int m41t81_write(uint8_t addr, int b) int m41t81_set_time(unsigned long t) { struct rtc_time tm; + unsigned long flags; to_tm(t, &tm); @@ -153,6 +154,7 @@ int m41t81_set_time(unsigned long t) * believe we should finish writing min within a second. */ + spin_lock_irqsave(&rtc_lock, flags); tm.tm_sec = BIN2BCD(tm.tm_sec); m41t81_write(M41T81REG_SC, tm.tm_sec); @@ -180,6 +182,7 @@ int m41t81_set_time(unsigned long t) tm.tm_year %= 100; tm.tm_year = BIN2BCD(tm.tm_year); m41t81_write(M41T81REG_YR, tm.tm_year); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -187,19 +190,23 @@ int m41t81_set_time(unsigned long t) unsigned long m41t81_get_time(void) { unsigned int year, mon, day, hour, min, sec; + unsigned long flags; /* * min is valid if two reads of sec are the same. */ for (;;) { + spin_lock_irqsave(&rtc_lock, flags); sec = m41t81_read(M41T81REG_SC); min = m41t81_read(M41T81REG_MN); if (sec == m41t81_read(M41T81REG_SC)) break; + spin_unlock_irqrestore(&rtc_lock, flags); } hour = m41t81_read(M41T81REG_HR) & 0x3f; day = m41t81_read(M41T81REG_DT); mon = m41t81_read(M41T81REG_MO); year = m41t81_read(M41T81REG_YR); + spin_unlock_irqrestore(&rtc_lock, flags); sec = BCD2BIN(sec); min = BCD2BIN(min); diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c index d9ff9323f24e..f4a178836415 100644 --- a/arch/mips/sibyte/swarm/rtc_xicor1241.c +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -113,9 +113,11 @@ int xicor_set_time(unsigned long t) { struct rtc_time tm; int tmp; + unsigned long flags; to_tm(t, &tm); + spin_lock_irqsave(&rtc_lock, flags); /* unlock writes to the CCR */ xicor_write(X1241REG_SR, X1241REG_SR_WEL); xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); @@ -160,6 +162,7 @@ int xicor_set_time(unsigned long t) xicor_write(X1241REG_HR, tmp); xicor_write(X1241REG_SR, 0); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -167,7 +170,9 @@ int xicor_set_time(unsigned long t) unsigned long xicor_get_time(void) { unsigned int year, mon, day, hour, min, sec, y2k; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); sec = xicor_read(X1241REG_SC); min = xicor_read(X1241REG_MN); hour = xicor_read(X1241REG_HR); @@ -183,6 +188,7 @@ unsigned long xicor_get_time(void) mon = xicor_read(X1241REG_MO); year = xicor_read(X1241REG_YR); y2k = xicor_read(X1241REG_Y2K); + spin_unlock_irqrestore(&rtc_lock, flags); sec = BCD2BIN(sec); min = BCD2BIN(min); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index 230f5a93c2e6..9cd9c0fe2265 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -84,7 +84,6 @@ IRQ Device #include <asm/ptrace.h> #include <asm/reboot.h> #include <asm/time.h> -#include <linux/version.h> #include <linux/bootmem.h> #include <asm/tx4938/rbtx4938.h> diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index 1ad44f92d6e4..e23c4e1e3a25 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -30,7 +30,6 @@ #include <linux/types.h> #include <linux/sched.h> #include <linux/thread_info.h> -#include <linux/version.h> #include <linux/ptrace.h> #include <linux/hardirq.h> diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 7fdca87ef647..fee4f1f09adc 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -88,11 +88,15 @@ void default_idle(void) */ void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) barrier(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 18130c3748f3..b6fe202a620d 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -78,52 +78,13 @@ void ptrace_disable(struct task_struct *child) pa_psw(child)->l = 0; } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; long ret; #ifdef DEBUG_PTRACE long oaddr=addr, odata=data; #endif - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - ret = -EPERM; - if (pid == 1) /* no messing around with init! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: { @@ -383,11 +344,11 @@ long sys_ptrace(long request, long pid, long addr, long data) case PTRACE_GETEVENTMSG: ret = put_user(child->ptrace_message, (unsigned int __user *) data); - goto out_tsk; + goto out; default: ret = ptrace_request(child, request, addr, data); - goto out_tsk; + goto out; } out_wake_notrap: @@ -396,10 +357,7 @@ out_wake: wake_up_process(child); ret = 0; out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - DBG("sys_ptrace(%ld, %d, %lx, %lx) returning %ld\n", + DBG("arch_ptrace(%ld, %d, %lx, %lx) returning %ld\n", request, pid, oaddr, odata, ret); return ret; } diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index 5db3be4e2704..a9ecf6465784 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -463,6 +463,7 @@ void __init smp_callin(void) #endif smp_cpu_init(slave_id); + preempt_disable(); #if 0 /* NOT WORKING YET - see entry.S */ istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index ca7acb0c79f0..94df74bcc0ee 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -261,7 +261,7 @@ config PPC_ISERIES config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 + depends on PPC32 && BROKEN config APUS bool "Amiga-APUS" @@ -305,7 +305,7 @@ config PPC_PMAC64 config PPC_PREP bool " PowerPC Reference Platform (PReP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 + depends on PPC_MULTIPLATFORM && PPC32 && BROKEN select PPC_I8259 select PPC_INDIRECT_PCI default y @@ -404,6 +404,14 @@ config CPU_FREQ_PMAC this currently includes some models of iBook & Titanium PowerBook. +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on CPU_FREQ && PMAC_SMU && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + config PPC601_SYNC_FIX bool "Workarounds for PPC601 bugs" depends on 6xx && (PPC_PREP || PPC_PMAC) @@ -484,6 +492,7 @@ source "fs/Kconfig.binfmt" config FORCE_MAX_ZONEORDER int depends on PPC64 + default "9" if PPC_64K_PAGES default "13" config MATH_EMULATION @@ -572,17 +581,12 @@ config ARCH_FLATMEM_ENABLE def_bool y depends on PPC64 && !NUMA -config ARCH_DISCONTIGMEM_ENABLE - def_bool y - depends on SMP && PPC_PSERIES - -config ARCH_DISCONTIGMEM_DEFAULT +config ARCH_SPARSEMEM_ENABLE def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE -config ARCH_SPARSEMEM_ENABLE +config ARCH_SPARSEMEM_DEFAULT def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE + depends on SMP && PPC_PSERIES source "mm/Kconfig" @@ -590,6 +594,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NEED_MULTIPLE_NODES +config ARCH_MEMORY_PROBE + def_bool y + depends on MEMORY_HOTPLUG + # Some NUMA nodes have memory ranges that span # other nodes. Even though a pfn is valid and # between a node's start and end pfns, it may not @@ -605,6 +613,7 @@ config NODES_SPAN_OTHER_NODES config PPC_64K_PAGES bool "64k page size" + depends on PPC64 help This option changes the kernel logical page size to 64k. On machines without processor support for 64k pages, the kernel will simulate @@ -916,8 +925,22 @@ source "arch/powerpc/platforms/iseries/Kconfig" source "lib/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/powerpc/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + depends on PPC64 + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/powerpc/Kconfig.debug" source "security/Kconfig" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 0baf64ec80d0..30a30bf559ea 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -9,16 +9,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL && PPC64 - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL && PPC64 diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 5bc11bd36c1f..99dbea8c5c50 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -14,10 +14,6 @@ HAS_BIARCH := $(call cc-option-yn, -m32) -ifeq ($(CONFIG_PPC64),y) -OLDARCH := ppc64 -SZ := 64 - # Set default 32 bits cross compilers for vdso and boot wrapper CROSS32_COMPILE ?= @@ -37,6 +33,10 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +ifeq ($(CONFIG_PPC64),y) +OLDARCH := ppc64 +SZ := 64 + new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi) ifeq ($(new_nm),y) @@ -139,7 +139,7 @@ drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ -defaultimage-$(CONFIG_PPC32) := uImage zImage +defaultimage-$(CONFIG_PPC32) := zImage defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux defaultimage-$(CONFIG_PPC_PSERIES) := zImage KBUILD_IMAGE := $(defaultimage-y) @@ -154,23 +154,13 @@ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm .PHONY: $(BOOT_TARGETS) -boot := arch/$(OLDARCH)/boot +boot := arch/$(ARCH)/boot -# urk -ifeq ($(CONFIG_PPC64),y) $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) -else -$(BOOT_TARGETS): vmlinux - $(Q)$(MAKE) ARCH=ppc $(build)=$(boot) $@ -endif - -uImage: vmlinux - $(Q)$(MAKE) ARCH=$(OLDARCH) $(build)=$(boot)/images $(boot)/images/$@ define archhelp - @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)' - @echo ' uImage - Create a bootable image for U-Boot / PPCBoot' + @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)' @echo ' install - Install kernel using' @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @@ -180,14 +170,13 @@ endef archclean: $(Q)$(MAKE) $(clean)=$(boot) - # Temporary hack until we have migrated to asm-powerpc $(Q)rm -rf arch/$(ARCH)/include archprepare: checkbin # Temporary hack until we have migrated to asm-powerpc include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: +arch/$(ARCH)/include/asm: FORCE $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi $(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm diff --git a/arch/ppc64/boot/Makefile b/arch/powerpc/boot/Makefile index 301bc1536c49..9770f587af73 100644 --- a/arch/ppc64/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -22,7 +22,8 @@ HOSTCC := gcc -BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include) -fPIC +BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \ + $(shell $(CROSS32CC) -print-file-name=include) -fPIC BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc BOOTLFLAGS := -T $(srctree)/$(src)/zImage.lds OBJCOPYFLAGS := contents,alloc,load,readonly,data @@ -98,7 +99,7 @@ quiet_cmd_ramdisk = RAMDISK $@ cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ quiet_cmd_stripvm = STRIP $@ - cmd_stripvm = $(STRIP) -s $< -o $@ + cmd_stripvm = $(STRIP) -s -R .comment $< -o $@ vmlinux.strip: vmlinux $(call if_changed,stripvm) diff --git a/arch/ppc64/boot/README b/arch/powerpc/boot/README index 3e11058760e4..3e11058760e4 100644 --- a/arch/ppc64/boot/README +++ b/arch/powerpc/boot/README diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c index 7f2c09473394..c02a99952be7 100644 --- a/arch/ppc64/boot/addRamDisk.c +++ b/arch/powerpc/boot/addRamDisk.c @@ -5,11 +5,59 @@ #include <sys/types.h> #include <sys/stat.h> #include <string.h> +#include <elf.h> #define ElfHeaderSize (64 * 1024) #define ElfPages (ElfHeaderSize / 4096) #define KERNELBASE (0xc000000000000000) +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +struct addr_range { + unsigned long long addr; + unsigned long memsize; + unsigned long offset; +}; + +static int check_elf64(void *p, int size, struct addr_range *r) +{ + Elf64_Ehdr *elf64 = p; + Elf64_Phdr *elf64ph; + + if (elf64->e_ident[EI_MAG0] != ELFMAG0 || + elf64->e_ident[EI_MAG1] != ELFMAG1 || + elf64->e_ident[EI_MAG2] != ELFMAG2 || + elf64->e_ident[EI_MAG3] != ELFMAG3 || + elf64->e_ident[EI_CLASS] != ELFCLASS64 || + elf64->e_ident[EI_DATA] != ELFDATA2MSB || + elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64) + return 0; + + if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size) + return 0; + + elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + + r->memsize = (unsigned long)elf64ph->p_memsz; + r->offset = (unsigned long)elf64ph->p_offset; + r->addr = (unsigned long long)elf64ph->p_vaddr; + +#ifdef DEBUG + printf("PPC64 ELF file, ph:\n"); + printf("p_type 0x%08x\n", elf64ph->p_type); + printf("p_flags 0x%08x\n", elf64ph->p_flags); + printf("p_offset 0x%016llx\n", elf64ph->p_offset); + printf("p_vaddr 0x%016llx\n", elf64ph->p_vaddr); + printf("p_paddr 0x%016llx\n", elf64ph->p_paddr); + printf("p_filesz 0x%016llx\n", elf64ph->p_filesz); + printf("p_memsz 0x%016llx\n", elf64ph->p_memsz); + printf("p_align 0x%016llx\n", elf64ph->p_align); + printf("... skipping 0x%08lx bytes of ELF header\n", + (unsigned long)elf64ph->p_offset); +#endif + + return 64; +} void get4k(FILE *file, char *buf ) { unsigned j; @@ -34,97 +82,92 @@ void death(const char *msg, FILE *fdesc, const char *fname) int main(int argc, char **argv) { char inbuf[4096]; - FILE *ramDisk = NULL; - FILE *sysmap = NULL; - FILE *inputVmlinux = NULL; - FILE *outputVmlinux = NULL; - - unsigned i = 0; - unsigned long ramFileLen = 0; - unsigned long ramLen = 0; - unsigned long roundR = 0; - - unsigned long sysmapFileLen = 0; - unsigned long sysmapLen = 0; - unsigned long sysmapPages = 0; - char* ptr_end = NULL; - unsigned long offset_end = 0; - - unsigned long kernelLen = 0; - unsigned long actualKernelLen = 0; - unsigned long round = 0; - unsigned long roundedKernelLen = 0; - unsigned long ramStartOffs = 0; - unsigned long ramPages = 0; - unsigned long roundedKernelPages = 0; - unsigned long hvReleaseData = 0; + struct addr_range vmlinux; + FILE *ramDisk; + FILE *inputVmlinux; + FILE *outputVmlinux; + + char *rd_name, *lx_name, *out_name; + + size_t i; + unsigned long ramFileLen; + unsigned long ramLen; + unsigned long roundR; + unsigned long offset_end; + + unsigned long kernelLen; + unsigned long actualKernelLen; + unsigned long round; + unsigned long roundedKernelLen; + unsigned long ramStartOffs; + unsigned long ramPages; + unsigned long roundedKernelPages; + unsigned long hvReleaseData; u_int32_t eyeCatcher = 0xc8a5d9c4; - unsigned long naca = 0; - unsigned long xRamDisk = 0; - unsigned long xRamDiskSize = 0; - long padPages = 0; + unsigned long naca; + unsigned long xRamDisk; + unsigned long xRamDiskSize; + long padPages; if (argc < 2) { fprintf(stderr, "Name of RAM disk file missing.\n"); exit(1); } + rd_name = argv[1]; if (argc < 3) { - fprintf(stderr, "Name of System Map input file is missing.\n"); - exit(1); - } - - if (argc < 4) { fprintf(stderr, "Name of vmlinux file missing.\n"); exit(1); } + lx_name = argv[2]; - if (argc < 5) { + if (argc < 4) { fprintf(stderr, "Name of vmlinux output file missing.\n"); exit(1); } + out_name = argv[3]; - ramDisk = fopen(argv[1], "r"); + ramDisk = fopen(rd_name, "r"); if ( ! ramDisk ) { - fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", argv[1]); + fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name); exit(1); } - sysmap = fopen(argv[2], "r"); - if ( ! sysmap ) { - fprintf(stderr, "System Map file \"%s\" failed to open.\n", argv[2]); - exit(1); - } - - inputVmlinux = fopen(argv[3], "r"); + inputVmlinux = fopen(lx_name, "r"); if ( ! inputVmlinux ) { - fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", argv[3]); + fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name); exit(1); } - outputVmlinux = fopen(argv[4], "w+"); + outputVmlinux = fopen(out_name, "w+"); if ( ! outputVmlinux ) { - fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", argv[4]); + fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name); exit(1); } - - - + + i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux); + if (i != sizeof(inbuf)) { + fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i); + exit(1); + } + + i = check_elf64(inbuf, sizeof(inbuf), &vmlinux); + if (i == 0) { + fprintf(stderr, "You must have a linux kernel specified as argv[2]\n"); + exit(1); + } + /* Input Vmlinux file */ fseek(inputVmlinux, 0, SEEK_END); kernelLen = ftell(inputVmlinux); fseek(inputVmlinux, 0, SEEK_SET); - printf("kernel file size = %d\n", kernelLen); - if ( kernelLen == 0 ) { - fprintf(stderr, "You must have a linux kernel specified as argv[3]\n"); - exit(1); - } + printf("kernel file size = %lu\n", kernelLen); actualKernelLen = kernelLen - ElfHeaderSize; - printf("actual kernel length (minus ELF header) = %d\n", actualKernelLen); + printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen); round = actualKernelLen % 4096; roundedKernelLen = actualKernelLen; @@ -134,39 +177,7 @@ int main(int argc, char **argv) roundedKernelPages = roundedKernelLen / 4096; printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages); - - - /* Input System Map file */ - /* (needs to be processed simply to determine if we need to add pad pages due to the static variables not being included in the vmlinux) */ - fseek(sysmap, 0, SEEK_END); - sysmapFileLen = ftell(sysmap); - fseek(sysmap, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[2], sysmapFileLen, sysmapFileLen); - - sysmapLen = sysmapFileLen; - - roundR = 4096 - (sysmapLen % 4096); - if (roundR) { - printf("Rounding System Map file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR); - sysmapLen += roundR; - } - printf("Rounded System Map size is %ld/0x%lx \n", sysmapLen, sysmapLen); - - /* Process the Sysmap file to determine where _end is */ - sysmapPages = sysmapLen / 4096; - /* read the whole file line by line, expect that it doesn't fail */ - while ( fgets(inbuf, 4096, sysmap) ) ; - /* search for _end in the last page of the system map */ - ptr_end = strstr(inbuf, " _end"); - if (!ptr_end) { - fprintf(stderr, "Unable to find _end in the sysmap file \n"); - fprintf(stderr, "inbuf: \n"); - fprintf(stderr, "%s \n", inbuf); - exit(1); - } - printf("Found _end in the last page of the sysmap - backing up 10 characters it looks like %s", ptr_end-10); - /* convert address of _end in system map to hex offset. */ - offset_end = (unsigned int)strtol(ptr_end-10, NULL, 16); + offset_end = _ALIGN_UP(vmlinux.memsize, 4096); /* calc how many pages we need to insert between the vmlinux and the start of the ram disk */ padPages = offset_end/4096 - roundedKernelPages; @@ -194,7 +205,7 @@ int main(int argc, char **argv) fseek(ramDisk, 0, SEEK_END); ramFileLen = ftell(ramDisk); fseek(ramDisk, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[1], ramFileLen, ramFileLen); + printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen); ramLen = ramFileLen; @@ -248,19 +259,19 @@ int main(int argc, char **argv) /* fseek to the hvReleaseData pointer */ fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET); if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData pointer\n", outputVmlinux, argv[4]); + death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name); } hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */ - printf("hvReleaseData is at %08x\n", hvReleaseData); + printf("hvReleaseData is at %08lx\n", hvReleaseData); /* fseek to the hvReleaseData */ fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET); if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData\n", outputVmlinux, argv[4]); + death("Could not read hvReleaseData\n", outputVmlinux, out_name); } /* Check hvReleaseData sanity */ if (memcmp(inbuf, &eyeCatcher, 4) != 0) { - death("hvReleaseData is invalid\n", outputVmlinux, argv[4]); + death("hvReleaseData is invalid\n", outputVmlinux, out_name); } /* Get the naca pointer */ naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE; @@ -269,13 +280,13 @@ int main(int argc, char **argv) /* fseek to the naca */ fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not read naca\n", outputVmlinux, argv[4]); + death("Could not read naca\n", outputVmlinux, out_name); } xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c])); xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14])); /* Make sure a RAM disk isn't already present */ if ((xRamDisk != 0) || (xRamDiskSize != 0)) { - death("RAM disk is already attached to this kernel\n", outputVmlinux, argv[4]); + death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name); } /* Fill in the values */ *((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs); @@ -285,15 +296,15 @@ int main(int argc, char **argv) fflush(outputVmlinux); fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not write naca\n", outputVmlinux, argv[4]); + death("Could not write naca\n", outputVmlinux, out_name); } - printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08x\n", + printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n", ramPages, ramStartOffs); /* Done */ fclose(outputVmlinux); /* Set permission to executable */ - chmod(argv[4], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); + chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); return 0; } diff --git a/arch/ppc64/boot/addnote.c b/arch/powerpc/boot/addnote.c index 8041a9845ab7..8041a9845ab7 100644 --- a/arch/ppc64/boot/addnote.c +++ b/arch/powerpc/boot/addnote.c diff --git a/arch/ppc64/boot/crt0.S b/arch/powerpc/boot/crt0.S index 9cc442263939..9cc442263939 100644 --- a/arch/ppc64/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S diff --git a/arch/ppc64/boot/div64.S b/arch/powerpc/boot/div64.S index 722f360a32a9..722f360a32a9 100644 --- a/arch/ppc64/boot/div64.S +++ b/arch/powerpc/boot/div64.S diff --git a/arch/ppc64/boot/elf.h b/arch/powerpc/boot/elf.h index d4828fcf1cb9..d4828fcf1cb9 100644 --- a/arch/ppc64/boot/elf.h +++ b/arch/powerpc/boot/elf.h diff --git a/arch/ppc64/boot/install.sh b/arch/powerpc/boot/install.sh index eacce9590816..eacce9590816 100644 --- a/arch/ppc64/boot/install.sh +++ b/arch/powerpc/boot/install.sh diff --git a/arch/ppc64/boot/main.c b/arch/powerpc/boot/main.c index c1dc876bccab..64ec93116fa6 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -42,6 +42,8 @@ static struct addr_range vmlinux; static struct addr_range vmlinuz; static struct addr_range initrd; +static unsigned long elfoffset; + static char scratch[46912]; /* scratch space for gunzip, from zlib_inflate_workspacesize() */ static char elfheader[256]; @@ -131,13 +133,70 @@ static unsigned long try_claim(unsigned long size) return addr; } +static int is_elf64(void *hdr) +{ + Elf64_Ehdr *elf64 = hdr; + Elf64_Phdr *elf64ph; + unsigned int i; + + if (!(elf64->e_ident[EI_MAG0] == ELFMAG0 && + elf64->e_ident[EI_MAG1] == ELFMAG1 && + elf64->e_ident[EI_MAG2] == ELFMAG2 && + elf64->e_ident[EI_MAG3] == ELFMAG3 && + elf64->e_ident[EI_CLASS] == ELFCLASS64 && + elf64->e_ident[EI_DATA] == ELFDATA2MSB && + elf64->e_type == ET_EXEC && + elf64->e_machine == EM_PPC64)) + return 0; + + elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++) + if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) + break; + if (i >= (unsigned int)elf64->e_phnum) + return 0; + + elfoffset = (unsigned long)elf64ph->p_offset; + vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset; + vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset; + return 1; +} + +static int is_elf32(void *hdr) +{ + Elf32_Ehdr *elf32 = hdr; + Elf32_Phdr *elf32ph; + unsigned int i; + + if (!(elf32->e_ident[EI_MAG0] == ELFMAG0 && + elf32->e_ident[EI_MAG1] == ELFMAG1 && + elf32->e_ident[EI_MAG2] == ELFMAG2 && + elf32->e_ident[EI_MAG3] == ELFMAG3 && + elf32->e_ident[EI_CLASS] == ELFCLASS32 && + elf32->e_ident[EI_DATA] == ELFDATA2MSB && + elf32->e_type == ET_EXEC && + elf32->e_machine == EM_PPC)) + return 0; + + elf32 = (Elf32_Ehdr *)elfheader; + elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff); + for (i = 0; i < elf32->e_phnum; i++, elf32ph++) + if (elf32ph->p_type == PT_LOAD && elf32ph->p_offset != 0) + break; + if (i >= elf32->e_phnum) + return 0; + + elfoffset = elf32ph->p_offset; + vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset; + vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset; + return 1; +} + void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) { - unsigned long i; int len; kernel_entry_t kernel_entry; - Elf64_Ehdr *elf64; - Elf64_Phdr *elf64ph; memset(__bss_start, 0, _end - __bss_start); @@ -153,6 +212,22 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp); + vmlinuz.addr = (unsigned long)_vmlinux_start; + vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); + + /* gunzip the ELF header of the kernel */ + if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { + len = vmlinuz.size; + gunzip(elfheader, sizeof(elfheader), + (unsigned char *)vmlinuz.addr, &len); + } else + memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader)); + + if (!is_elf64(elfheader) && !is_elf32(elfheader)) { + printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r"); + exit(); + } + /* * The first available claim_base must be above the end of the * the loaded kernel wrapper file (_start to _end includes the @@ -172,39 +247,11 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) claim_base = PROG_START; #endif - vmlinuz.addr = (unsigned long)_vmlinux_start; - vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); - - /* gunzip the ELF header of the kernel */ - if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { - len = vmlinuz.size; - gunzip(elfheader, sizeof(elfheader), - (unsigned char *)vmlinuz.addr, &len); - } else - memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader)); - - elf64 = (Elf64_Ehdr *)elfheader; - if ( elf64->e_ident[EI_MAG0] != ELFMAG0 || - elf64->e_ident[EI_MAG1] != ELFMAG1 || - elf64->e_ident[EI_MAG2] != ELFMAG2 || - elf64->e_ident[EI_MAG3] != ELFMAG3 || - elf64->e_ident[EI_CLASS] != ELFCLASS64 || - elf64->e_ident[EI_DATA] != ELFDATA2MSB || - elf64->e_type != ET_EXEC || - elf64->e_machine != EM_PPC64 ) - { - printf("Error: not a valid PPC64 ELF file!\n\r"); - exit(); - } - - elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + - (unsigned long)elf64->e_phoff); - for(i=0; i < (unsigned int)elf64->e_phnum ;i++,elf64ph++) { - if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) - break; - } - vmlinux.size = (unsigned long)elf64ph->p_filesz; - vmlinux.memsize = (unsigned long)elf64ph->p_memsz; + /* We need to claim the memsize plus the file offset since gzip + * will expand the header (file offset), then the kernel, then + * possible rubbish we don't care about. But the kernel bss must + * be claimed (it will be zero'd by the kernel itself) + */ printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); vmlinux.addr = try_claim(vmlinux.memsize); if (vmlinux.addr == 0) { @@ -247,9 +294,9 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) /* Skip over the ELF header */ #ifdef DEBUG printf("... skipping 0x%lx bytes of ELF header\n\r", - (unsigned long)elf64ph->p_offset); + elfoffset); #endif - vmlinux.addr += (unsigned long)elf64ph->p_offset; + vmlinux.addr += elfoffset; flush_cache((void *)vmlinux.addr, vmlinux.size); @@ -265,7 +312,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) (unsigned long)prom, NULL); #endif - kernel_entry( a1, a2, prom, NULL ); + kernel_entry(a1, a2, prom, NULL); printf("Error: Linux kernel returned to zImage bootloader!\n\r"); diff --git a/arch/ppc64/boot/page.h b/arch/powerpc/boot/page.h index 14eca30fef64..14eca30fef64 100644 --- a/arch/ppc64/boot/page.h +++ b/arch/powerpc/boot/page.h diff --git a/arch/ppc64/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h index 1c2c2817f9b7..1c2c2817f9b7 100644 --- a/arch/ppc64/boot/ppc_asm.h +++ b/arch/powerpc/boot/ppc_asm.h diff --git a/arch/ppc64/boot/prom.c b/arch/powerpc/boot/prom.c index 4bea2f4dcb06..4bea2f4dcb06 100644 --- a/arch/ppc64/boot/prom.c +++ b/arch/powerpc/boot/prom.c diff --git a/arch/ppc64/boot/prom.h b/arch/powerpc/boot/prom.h index 96ab5aec740c..96ab5aec740c 100644 --- a/arch/ppc64/boot/prom.h +++ b/arch/powerpc/boot/prom.h diff --git a/arch/ppc64/boot/stdio.h b/arch/powerpc/boot/stdio.h index 24bd3a8dee94..24bd3a8dee94 100644 --- a/arch/ppc64/boot/stdio.h +++ b/arch/powerpc/boot/stdio.h diff --git a/arch/ppc64/boot/string.S b/arch/powerpc/boot/string.S index b1eeaed7db17..b1eeaed7db17 100644 --- a/arch/ppc64/boot/string.S +++ b/arch/powerpc/boot/string.S diff --git a/arch/ppc64/boot/string.h b/arch/powerpc/boot/string.h index 9fdff1cc0d70..9fdff1cc0d70 100644 --- a/arch/ppc64/boot/string.h +++ b/arch/powerpc/boot/string.h diff --git a/arch/ppc64/boot/zImage.lds b/arch/powerpc/boot/zImage.lds index 4b6bb3ffe3dc..4b6bb3ffe3dc 100644 --- a/arch/ppc64/boot/zImage.lds +++ b/arch/powerpc/boot/zImage.lds diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 67ffecbc05cb..4b433411b9e3 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:29:10 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:36:20 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 # # Code maturity level options @@ -66,31 +81,69 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -CONFIG_PPC_BPA=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +CONFIG_PPC_CELL=y CONFIG_PPC_OF=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y # CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_MMIO_NVRAM=y +CONFIG_CELL_IIC=y +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=4 +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -98,30 +151,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -136,6 +180,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -183,6 +228,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -284,6 +333,10 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -345,14 +398,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -442,6 +487,7 @@ CONFIG_IDEDMA_AUTO=y # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -495,7 +541,6 @@ CONFIG_SKGE=m # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # @@ -625,7 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_WATCHDOG_RTAS=y +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -633,6 +678,8 @@ CONFIG_WATCHDOG_RTAS=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -649,6 +696,7 @@ CONFIG_WATCHDOG_RTAS=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -699,6 +747,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -757,6 +806,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -943,9 +996,24 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_UTF8 is not set # -# Profiling support +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -962,13 +1030,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set # # Security options @@ -1008,17 +1077,3 @@ CONFIG_CRYPTO_DEFLATE=m # # Hardware crypto devices # - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 6323065fbf2c..e7c23e3902b8 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,18 +1,32 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:23 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:39:20 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +CONFIG_POWER4_ONLY=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 # # Code maturity level options @@ -67,32 +81,80 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y CONFIG_U3_DART=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -100,28 +162,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG_CPU is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -136,6 +191,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -177,6 +233,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -276,6 +336,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -340,14 +404,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -449,6 +505,7 @@ CONFIG_SCSI_SPI_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -465,10 +522,12 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -567,6 +626,9 @@ CONFIG_IEEE1394_RAWIO=y CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y # # Network device support @@ -656,6 +718,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -750,6 +813,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -768,6 +833,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -820,6 +886,7 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -861,7 +928,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -876,10 +942,10 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=y -# CONFIG_FB_RIVA_I2C is not set -# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y +# CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=y @@ -895,7 +961,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -904,6 +969,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -924,7 +990,96 @@ CONFIG_LCD_DEVICE=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support @@ -958,12 +1113,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1074,6 +1233,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m @@ -1311,10 +1471,25 @@ CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1331,12 +1506,13 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y # # Security options @@ -1376,17 +1552,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 62e92c7e9e27..5d0866707a75 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:56 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:38:09 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 # # Code maturity level options @@ -68,22 +83,60 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_ISERIES=y # CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC=y -CONFIG_PPC64=y +CONFIG_PPC_ISERIES=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y -# CONFIG_POWER4_ONLY is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 +CONFIG_IRQ_ALL_CPUS=y +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -91,26 +144,20 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_LPARCFG=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -125,6 +172,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -166,6 +214,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -265,6 +317,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -326,14 +382,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -377,6 +425,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -454,6 +503,7 @@ CONFIG_DM_ZERO=m # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -561,6 +611,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -643,6 +694,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -660,6 +713,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -713,6 +767,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -917,10 +975,25 @@ CONFIG_VIOTAPE=m CONFIG_VIOPATH=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -937,11 +1010,11 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y # @@ -982,17 +1055,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 7b480f3d1406..92e42613ef06 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,18 +1,32 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:31:24 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:38:58 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +CONFIG_POWER4_ONLY=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 # # Code maturity level options @@ -67,32 +81,67 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y -CONFIG_MPIC=y -# CONFIG_ALTIVEC is not set -CONFIG_KEXEC=y CONFIG_U3_DART=y +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -100,27 +149,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -135,6 +178,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -193,6 +237,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -254,14 +302,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -351,6 +391,7 @@ CONFIG_IDEDMA_AUTO=y # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -533,6 +574,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -549,6 +592,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -599,6 +643,7 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -681,12 +726,15 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -776,6 +824,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set @@ -985,9 +1034,19 @@ CONFIG_NLS_DEFAULT="utf-8" CONFIG_NLS_UTF8=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y + +# +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1004,14 +1063,15 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set # CONFIG_IRQSTACKS is not set +CONFIG_BOOTX_TEXT=y # # Security options @@ -1051,12 +1111,3 @@ CONFIG_CRYPTO_DES=y # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 9f09dff9e11a..b4745c918a4a 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:32:17 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:36:55 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=128 # # Code maturity level options @@ -68,75 +83,103 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set CONFIG_PPC_PSERIES=y -# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y CONFIG_XICS=y +# CONFIG_U3_DART is not set CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=128 +CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +CONFIG_NUMA=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA=y +# CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_HOTPLUG_CPU=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -156,6 +199,7 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -197,6 +241,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -299,6 +347,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -368,14 +420,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -473,6 +517,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -559,6 +604,7 @@ CONFIG_DM_MULTIPATH_EMC=m # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -645,7 +691,6 @@ CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set # # Token Ring devices @@ -674,6 +719,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -784,6 +830,8 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -801,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=1024 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -852,6 +901,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -893,7 +943,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -905,6 +954,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y @@ -927,7 +977,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -936,6 +985,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -990,12 +1040,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1106,6 +1159,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1288,10 +1342,25 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1308,14 +1377,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set # # Security options @@ -1355,17 +1425,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b3ae2993efb8..4970e3721a84 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -4,6 +4,7 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc +CFLAGS_ioctl32.o += -Ifs/ endif ifeq ($(CONFIG_PPC32),y) CFLAGS_prom_init.o += -fPIC @@ -11,17 +12,29 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - signal_32.o pmc.o + irq.o signal_32.o pmc.o vdso.o +obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ - signal_64.o ptrace32.o systbl.o + signal_64.o ptrace32.o systbl.o \ + paca.o ioctl32.o cpu_setup_power4.o \ + firmware.o sysfs.o udbg.o +obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o -obj-$(CONFIG_PPC_RTAS) += rtas.o +procfs-$(CONFIG_PPC64) := proc_ppc64.o +obj-$(CONFIG_PROC_FS) += $(procfs-y) +rtaspci-$(CONFIG_PPC64) := rtas_pci.o +obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y) obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o +obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o +obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o +obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o +udbgscc-$(CONFIG_PPC64) := udbg_scc.o +obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) ifeq ($(CONFIG_PPC_MERGE),y) @@ -36,12 +49,23 @@ extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ prom.o traps.o setup-common.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o -obj-$(CONFIG_PPC64) += misc_64.o +obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_KPROBES) += kprobes.o + +module-$(CONFIG_PPC64) += module_64.o +obj-$(CONFIG_MODULES) += $(module-y) + +pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ + pci_direct_iommu.o iomap.o +obj-$(CONFIG_PCI) += $(pci64-y) + +kexec64-$(CONFIG_PPC64) += machine_kexec_64.o +obj-$(CONFIG_KEXEC) += $(kexec64-y) ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s @@ -49,11 +73,8 @@ AFLAGS_head_64.o += -I$(obj) endif else -# stuff used from here for ARCH=ppc or ARCH=ppc64 +# stuff used from here for ARCH=ppc smpobj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \ - setup-common.o $(smpobj-y) - endif diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index b75757251994..91538d2445bf 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -37,12 +37,12 @@ #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/rtas.h> +#include <asm/vdso_datapage.h> #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/lppaca.h> #include <asm/iseries/hv_lp_event.h> #include <asm/cache.h> -#include <asm/systemcfg.h> #include <asm/compat.h> #endif @@ -106,7 +106,6 @@ int main(void) DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); /* paca */ @@ -252,25 +251,44 @@ int main(void) DEFINE(TASK_SIZE, TASK_SIZE); DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28); -#else /* CONFIG_PPC64 */ - /* systemcfg offsets for use by vdso */ - DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct systemcfg, tb_orig_stamp)); - DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct systemcfg, tb_ticks_per_sec)); - DEFINE(CFG_TB_TO_XS, offsetof(struct systemcfg, tb_to_xs)); - DEFINE(CFG_STAMP_XSEC, offsetof(struct systemcfg, stamp_xsec)); - DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct systemcfg, tb_update_count)); - DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct systemcfg, tz_minuteswest)); - DEFINE(CFG_TZ_DSTTIME, offsetof(struct systemcfg, tz_dsttime)); - DEFINE(CFG_SYSCALL_MAP32, offsetof(struct systemcfg, syscall_map_32)); - DEFINE(CFG_SYSCALL_MAP64, offsetof(struct systemcfg, syscall_map_64)); +#endif /* ! CONFIG_PPC64 */ - /* timeval/timezone offsets for use by vdso */ + /* datapage offsets for use by vdso */ + DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp)); + DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec)); + DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs)); + DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec)); + DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count)); + DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest)); + DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime)); + DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32)); + DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec)); + DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); +#ifdef CONFIG_PPC64 + DEFINE(CFG_SYSCALL_MAP64, offsetof(struct vdso_data, syscall_map_64)); DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec)); DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec)); DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec)); DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec)); + DEFINE(TSPC64_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPC64_TV_NSEC, offsetof(struct timespec, tv_nsec)); + DEFINE(TSPC32_TV_SEC, offsetof(struct compat_timespec, tv_sec)); + DEFINE(TSPC32_TV_NSEC, offsetof(struct compat_timespec, tv_nsec)); +#else + DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec)); + DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec)); + DEFINE(TSPC32_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); +#endif + /* timeval/timezone offsets for use by vdso */ DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime)); -#endif /* CONFIG_PPC64 */ + + /* Other bits used by the vdso */ + DEFINE(CLOCK_REALTIME, CLOCK_REALTIME); + DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC); + DEFINE(NSEC_PER_SEC, NSEC_PER_SEC); + DEFINE(CLOCK_REALTIME_RES, TICK_NSEC); + return 0; } diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S index 1fb673c511ff..cca942fe6115 100644 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -114,11 +114,11 @@ _GLOBAL(__setup_cpu_ppc970) .data .balign L1_CACHE_BYTES,0 -cpu_state_storage: +cpu_state_storage: .space CS_SIZE .balign L1_CACHE_BYTES,0 .text - + /* Called in normal context to backup CPU 0 state. This * does not include cache settings. This function is also * called for machine sleep. This does not include the MMU @@ -151,7 +151,7 @@ _GLOBAL(__save_cpu_setup) std r3,CS_HID4(r5) mfspr r3,SPRN_HID5 std r3,CS_HID5(r5) - + 2: mtcr r7 blr @@ -213,7 +213,7 @@ _GLOBAL(__restore_cpu_setup) mtspr SPRN_HID1,r3 sync isync - + /* Restore HID4 */ ld r3,CS_HID4(r5) sync diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 33c63bcf69f8..1d85cedbbb7b 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -52,6 +52,9 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); #define COMMON_USER (PPC_FEATURE_32 | PPC_FEATURE_HAS_FPU | \ PPC_FEATURE_HAS_MMU) #define COMMON_USER_PPC64 (COMMON_USER | PPC_FEATURE_64) +#define COMMON_USER_POWER4 (COMMON_USER_PPC64 | PPC_FEATURE_POWER4) +#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5) +#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS) /* We only set the spe features if the kernel was compiled with @@ -160,7 +163,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00350000, .cpu_name = "POWER4 (gp)", .cpu_features = CPU_FTRS_POWER4, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER4, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, @@ -175,7 +178,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00380000, .cpu_name = "POWER4+ (gq)", .cpu_features = CPU_FTRS_POWER4, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER4, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, @@ -190,7 +193,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00390000, .cpu_name = "PPC970", .cpu_features = CPU_FTRS_PPC970, - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -212,7 +215,7 @@ struct cpu_spec cpu_specs[] = { #else .cpu_features = CPU_FTRS_PPC970, #endif - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -230,7 +233,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00440000, .cpu_name = "PPC970MP", .cpu_features = CPU_FTRS_PPC970, - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -245,7 +248,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x003a0000, .cpu_name = "POWER5 (gr)", .cpu_features = CPU_FTRS_POWER5, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER5, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, @@ -260,7 +263,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x003b0000, .cpu_name = "POWER5 (gs)", .cpu_features = CPU_FTRS_POWER5, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER5_PLUS, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, @@ -276,7 +279,7 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "Cell Broadband Engine", .cpu_features = CPU_FTRS_CELL, .cpu_user_features = COMMON_USER_PPC64 | - PPC_FEATURE_HAS_ALTIVEC_COMP, + PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, .cpu_setup = __setup_cpu_be, @@ -929,6 +932,16 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 440SPe Rev. A */ + .pvr_mask = 0xff000fff, + .pvr_value = 0x53000890, + .cpu_name = "440SPe Rev. A", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_44x */ #ifdef CONFIG_FSL_BOOKE { /* e200z5 */ diff --git a/arch/ppc64/kernel/dma.c b/arch/powerpc/kernel/dma_64.c index 7c3419656ccc..7c3419656ccc 100644 --- a/arch/ppc64/kernel/dma.c +++ b/arch/powerpc/kernel/dma_64.c diff --git a/arch/ppc64/kernel/firmware.c b/arch/powerpc/kernel/firmware.c index d8432c0fb27d..65eae752a527 100644 --- a/arch/ppc64/kernel/firmware.c +++ b/arch/powerpc/kernel/firmware.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/firmware.c - * * Extracted from cputable.c * * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 4d6001fa1cf2..b780b42c95fc 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -41,20 +41,20 @@ _GLOBAL(load_up_fpu) #ifndef CONFIG_SMP LOADBASE(r3, last_task_used_math) toreal(r3) - LDL r4,OFF(last_task_used_math)(r3) - CMPI 0,r4,0 + PPC_LL r4,OFF(last_task_used_math)(r3) + PPC_LCMPI 0,r4,0 beq 1f toreal(r4) addi r4,r4,THREAD /* want last_task_used_math->thread */ SAVE_32FPRS(0, r4) mffs fr0 stfd fr0,THREAD_FPSCR(r4) - LDL r5,PT_REGS(r4) + PPC_LL r5,PT_REGS(r4) toreal(r5) - LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r10,MSR_FP|MSR_FE0|MSR_FE1 andc r4,r4,r10 /* disable FP for previous task */ - STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #endif /* CONFIG_SMP */ /* enable use of FP after return */ @@ -77,7 +77,7 @@ _GLOBAL(load_up_fpu) #ifndef CONFIG_SMP subi r4,r5,THREAD fromreal(r4) - STL r4,OFF(last_task_used_math)(r3) + PPC_STL r4,OFF(last_task_used_math)(r3) #endif /* CONFIG_SMP */ /* restore registers and return */ /* we haven't used ctr or xer or lr */ @@ -97,24 +97,24 @@ _GLOBAL(giveup_fpu) MTMSRD(r5) /* enable use of fpu now */ SYNC_601 isync - CMPI 0,r3,0 + PPC_LCMPI 0,r3,0 beqlr- /* if no previous owner, done */ addi r3,r3,THREAD /* want THREAD of task */ - LDL r5,PT_REGS(r3) - CMPI 0,r5,0 + PPC_LL r5,PT_REGS(r3) + PPC_LCMPI 0,r5,0 SAVE_32FPRS(0, r3) mffs fr0 stfd fr0,THREAD_FPSCR(r3) beq 1f - LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r3,MSR_FP|MSR_FE0|MSR_FE1 andc r4,r4,r3 /* disable FP for previous task */ - STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #ifndef CONFIG_SMP li r5,0 LOADBASE(r4,last_task_used_math) - STL r5,OFF(last_task_used_math)(r4) + PPC_STL r5,OFF(last_task_used_math)(r4) #endif /* CONFIG_SMP */ blr diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index b102e3a2415e..ccdf94731e30 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -1100,6 +1100,7 @@ start_here: mr r3,r31 mr r4,r30 bl machine_init + bl __save_cpu_setup bl MMU_init #ifdef CONFIG_APUS diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 16ab40daa738..8a8bf79ef044 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -28,7 +28,6 @@ #include <asm/reg.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/systemcfg.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/bug.h> @@ -1697,25 +1696,14 @@ _GLOBAL(pmac_secondary_start) * SPRG3 = paca virtual address */ _GLOBAL(__secondary_start) + /* Set thread priority to MEDIUM */ + HMT_MEDIUM - HMT_MEDIUM /* Set thread priority to MEDIUM */ - + /* Load TOC */ ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ -BEGIN_FTR_SECTION - bl .stab_initialize -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - bl .slb_initialize + + /* Do early setup for that CPU (stab, slb, hash table pointer) */ + bl .early_setup_secondary /* Initialize the kernel stack. Just a repeat for iSeries. */ LOADADDR(r3,current_set) @@ -1724,37 +1712,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD std r1,PACAKSAVE(r13) - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif + /* Clear backchain so we get nice backtraces */ li r7,0 mtlr r7 @@ -1777,6 +1735,7 @@ _GLOBAL(start_secondary_prolog) li r3,0 std r3,0(r1) /* Zero the stack frame pointer */ bl .start_secondary + b . #endif /* @@ -1896,40 +1855,6 @@ _STATIC(start_here_multiplatform) mr r3,r31 bl .early_setup - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - add r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: LOADADDR(r3,.start_here_common) SET_REG_TO_CONST(r4, MSR_KERNEL) mtspr SPRN_SRR0,r3 diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 5063c603fad4..8d60fa99fc4b 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -24,7 +24,7 @@ * Copyright 2002-2004 MontaVista Software, Inc. * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org> * Copyright 2004 Freescale Semiconductor, Inc - * PowerPC e500 modifications, Kumar Gala <kumar.gala@freescale.com> + * PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/powerpc/kernel/ioctl32.c index ba4a899045c2..0fa3d27fef01 100644 --- a/arch/ppc64/kernel/ioctl32.c +++ b/arch/powerpc/kernel/ioctl32.c @@ -1,6 +1,6 @@ -/* +/* * ioctl32.c: Conversion between 32bit and 64bit native ioctls. - * + * * Based on sparc64 ioctl32.c by: * * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) @@ -40,10 +40,6 @@ IOCTL_TABLE_START #define DECLARES #include "compat_ioctl.c" -/* Little p (/dev/rtc, /dev/envctrl, etc.) */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ - IOCTL_TABLE_END int ioctl_table_size = ARRAY_SIZE(ioctl_start); diff --git a/arch/ppc64/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index 6160c8dbb7c5..6160c8dbb7c5 100644 --- a/arch/ppc64/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c diff --git a/arch/ppc64/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 4d9b4388918b..4d9b4388918b 100644 --- a/arch/ppc64/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c diff --git a/arch/ppc64/kernel/irq.c b/arch/powerpc/kernel/irq.c index 87474584033f..5a71ed9612fe 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -5,12 +5,12 @@ * Copyright (C) 1992 Linus Torvalds * Adapted from arch/i386 by Gary Thomas * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan (cort@cs.nmt.edu) - * Copyright (C) 1996 Cort Dougan + * Updated and modified by Cort Dougan <cort@fsmlabs.com> + * Copyright (C) 1996-2001 Cort Dougan * Adapted for Power Macintosh by Paul Mackerras * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -21,6 +21,14 @@ * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. + * + * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the + * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit + * mask register (of which only 16 are defined), hence the weird shifting + * and complement of the cached_irq_mask. I want to be able to stuff + * this right into the SIU SMASK register. + * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx + * to reduce code space and undefined function references. */ #include <linux/errno.h> @@ -29,6 +37,7 @@ #include <linux/kernel_stat.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/timex.h> @@ -40,9 +49,13 @@ #include <linux/irq.h> #include <linux/proc_fs.h> #include <linux/random.h> -#include <linux/kallsyms.h> +#include <linux/seq_file.h> +#include <linux/cpumask.h> #include <linux/profile.h> #include <linux/bitops.h> +#ifdef CONFIG_PPC64 +#include <linux/kallsyms.h> +#endif #include <asm/uaccess.h> #include <asm/system.h> @@ -52,35 +65,58 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iseries/it_lp_queue.h> #include <asm/machdep.h> +#ifdef CONFIG_PPC64 +#include <asm/iseries/it_lp_queue.h> #include <asm/paca.h> +#endif -#ifdef CONFIG_SMP -extern void iSeries_smp_message_recv( struct pt_regs * ); +int __irq_offset_value; +#ifdef CONFIG_PPC32 +EXPORT_SYMBOL(__irq_offset_value); +#endif + +static int ppc_spurious_interrupts; + +#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP) +extern void iSeries_smp_message_recv(struct pt_regs *); #endif -extern irq_desc_t irq_desc[NR_IRQS]; +#ifdef CONFIG_PPC32 +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) + +unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +atomic_t ppc_n_lost_interrupts; + +#ifdef CONFIG_TAU_INT +extern int tau_initialized; +extern int tau_interrupts(int); +#endif + +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) +extern atomic_t ipi_recv; +extern atomic_t ipi_sent; +#endif +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; -int __irq_offset_value; -int ppc_spurious_interrupts; u64 ppc64_interrupt_controller; +#endif /* CONFIG_PPC64 */ int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v, j; - struct irqaction * action; + int i = *(loff_t *)v, j; + struct irqaction *action; irq_desc_t *desc; unsigned long flags; if (i == 0) { - seq_printf(p, " "); - for (j=0; j<NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "CPU%d ",j); - } + seq_puts(p, " "); + for_each_online_cpu(j) + seq_printf(p, "CPU%d ", j); seq_putc(p, '\n'); } @@ -92,26 +128,41 @@ int show_interrupts(struct seq_file *p, void *v) goto skip; seq_printf(p, "%3d: ", i); #ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); - } + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #else seq_printf(p, "%10u ", kstat_irqs(i)); #endif /* CONFIG_SMP */ if (desc->handler) - seq_printf(p, " %s ", desc->handler->typename ); + seq_printf(p, " %s ", desc->handler->typename); else - seq_printf(p, " None "); + seq_puts(p, " None "); seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s",action->name); - for (action=action->next; action; action = action->next) + seq_printf(p, " %s", action->name); + for (action = action->next; action; action = action->next) seq_printf(p, ", %s", action->name); seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) + } else if (i == NR_IRQS) { +#ifdef CONFIG_PPC32 +#ifdef CONFIG_TAU_INT + if (tau_initialized){ + seq_puts(p, "TAU: "); + for (j = 0; j < NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "%10u ", tau_interrupts(j)); + seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); + } +#endif +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) + /* should this be per processor send/receive? */ + seq_printf(p, "IPI (recv/sent): %10u/%u\n", + atomic_read(&ipi_recv), atomic_read(&ipi_sent)); +#endif +#endif /* CONFIG_PPC32 */ seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); + } return 0; } @@ -144,126 +195,6 @@ void fixup_irqs(cpumask_t map) } #endif -extern int noirqdebug; - -/* - * Eventually, this should take an array of interrupts and an array size - * so it can dispatch multiple interrupts. - */ -void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) -{ - int status; - struct irqaction *action; - int cpu = smp_processor_id(); - irq_desc_t *desc = get_irq_desc(irq); - irqreturn_t action_ret; -#ifdef CONFIG_IRQSTACKS - struct thread_info *curtp, *irqtp; -#endif - - kstat_cpu(cpu).irqs[irq]++; - - if (desc->status & IRQ_PER_CPU) { - /* no locking required for CPU-local interrupts: */ - ack_irq(irq); - action_ret = handle_IRQ_event(irq, regs, desc->action); - desc->handler->end(irq); - return; - } - - spin_lock(&desc->lock); - ack_irq(irq); - /* - REPLAY is when Linux resends an IRQ that was dropped earlier - WAITING is used by probe to mark irqs that are being tested - */ - status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); - status |= IRQ_PENDING; /* we _want_ to handle it */ - - /* - * If the IRQ is disabled for whatever reason, we cannot - * use the action we have. - */ - action = NULL; - if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) { - action = desc->action; - if (!action || !action->handler) { - ppc_spurious_interrupts++; - printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq); - /* We can't call disable_irq here, it would deadlock */ - if (!desc->depth) - desc->depth = 1; - desc->status |= IRQ_DISABLED; - /* This is not a real spurrious interrupt, we - * have to eoi it, so we jump to out - */ - mask_irq(irq); - goto out; - } - status &= ~IRQ_PENDING; /* we commit to handling */ - status |= IRQ_INPROGRESS; /* we are handling it */ - } - desc->status = status; - - /* - * If there is no IRQ handler or it was disabled, exit early. - Since we set PENDING, if another processor is handling - a different instance of this same irq, the other processor - will take care of it. - */ - if (unlikely(!action)) - goto out; - - /* - * Edge triggered interrupts need to remember - * pending events. - * This applies to any hw interrupts that allow a second - * instance of the same irq to arrive while we are in do_IRQ - * or in the handler. But the code here only handles the _second_ - * instance of the irq, not the third or fourth. So it is mostly - * useful for irq hardware that does not mask cleanly in an - * SMP environment. - */ - for (;;) { - spin_unlock(&desc->lock); - -#ifdef CONFIG_IRQSTACKS - /* Switch to the irq stack to handle this */ - curtp = current_thread_info(); - irqtp = hardirq_ctx[smp_processor_id()]; - if (curtp != irqtp) { - irqtp->task = curtp->task; - irqtp->flags = 0; - action_ret = call_handle_IRQ_event(irq, regs, action, irqtp); - irqtp->task = NULL; - if (irqtp->flags) - set_bits(irqtp->flags, &curtp->flags); - } else -#endif - action_ret = handle_IRQ_event(irq, regs, action); - - spin_lock(&desc->lock); - if (!noirqdebug) - note_interrupt(irq, desc, action_ret, regs); - if (likely(!(desc->status & IRQ_PENDING))) - break; - desc->status &= ~IRQ_PENDING; - } -out: - desc->status &= ~IRQ_INPROGRESS; - /* - * The ->end() handler has to deal with interrupts which got - * disabled while the handler was running. - */ - if (desc->handler) { - if (desc->handler->end) - desc->handler->end(irq); - else if (desc->handler->enable) - desc->handler->enable(irq); - } - spin_unlock(&desc->lock); -} - #ifdef CONFIG_PPC_ISERIES void do_IRQ(struct pt_regs *regs) { @@ -310,8 +241,11 @@ void do_IRQ(struct pt_regs *regs) void do_IRQ(struct pt_regs *regs) { int irq; +#ifdef CONFIG_IRQSTACKS + struct thread_info *curtp, *irqtp; +#endif - irq_enter(); + irq_enter(); #ifdef CONFIG_DEBUG_STACKOVERFLOW /* Debugging check for stack overflow: is there less than 2KB free? */ @@ -328,20 +262,44 @@ void do_IRQ(struct pt_regs *regs) } #endif + /* + * Every platform is required to implement ppc_md.get_irq. + * This function will either return an irq number or -1 to + * indicate there are no more pending. + * The value -2 is for buggy hardware and means that this IRQ + * has already been handled. -- Tom + */ irq = ppc_md.get_irq(regs); - if (irq >= 0) - ppc_irq_dispatch_handler(regs, irq); - else - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - - irq_exit(); + if (irq >= 0) { +#ifdef CONFIG_IRQSTACKS + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + if (curtp != irqtp) { + irqtp->task = curtp->task; + irqtp->flags = 0; + call___do_IRQ(irq, regs, irqtp); + irqtp->task = NULL; + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); + } else +#endif + __do_IRQ(irq, regs); + } else +#ifdef CONFIG_PPC32 + if (irq != -2) +#endif + /* That's not SMP safe ... but who cares ? */ + ppc_spurious_interrupts++; + irq_exit(); } + #endif /* CONFIG_PPC_ISERIES */ void __init init_IRQ(void) { +#ifdef CONFIG_PPC64 static int once = 0; if (once) @@ -349,11 +307,14 @@ void __init init_IRQ(void) once++; +#endif ppc_md.init_IRQ(); +#ifdef CONFIG_PPC64 irq_ctx_init(); +#endif } -#ifndef CONFIG_PPC_ISERIES +#ifdef CONFIG_PPC64 /* * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. */ @@ -462,8 +423,6 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) } -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQSTACKS struct thread_info *softirq_ctx[NR_CPUS]; struct thread_info *hardirq_ctx[NR_CPUS]; @@ -517,3 +476,4 @@ static int __init setup_noirqdistrib(char *str) } __setup("noirqdistrib", setup_noirqdistrib); +#endif /* CONFIG_PPC64 */ diff --git a/arch/ppc64/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index ed876a5178ae..511af54e6230 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -30,19 +30,14 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/preempt.h> #include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/sstep.h> static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_saved_msr; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; -static struct pt_regs jprobe_saved_regs; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); int __kprobes arch_prepare_kprobe(struct kprobe *p) { @@ -108,20 +103,28 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->nip = (unsigned long)p->ainsn.insn; } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr; +} + +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_saved_msr_prev = kprobe_saved_msr; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr; } -static inline void restore_previous_kprobe(void) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_saved_msr = kprobe_saved_msr_prev; + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_msr = regs->msr; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -145,19 +148,24 @@ static inline int kprobe_handler(struct pt_regs *regs) struct kprobe *p; int ret = 0; unsigned int *addr = (unsigned int *)regs->nip; + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { kprobe_opcode_t insn = *p->ainsn.insn; - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && is_trap(insn)) { regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; - unlock_kprobes(); + regs->msr |= kcb->kprobe_saved_msr; goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -166,27 +174,24 @@ static inline int kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - current_kprobe = p; - kprobe_saved_msr = regs->msr; + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_saved_msr = regs->msr; p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*addr != BREAKPOINT_INSTRUCTION) { /* * PowerPC has multiple variants of the "trap" @@ -209,24 +214,19 @@ static inline int kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; - kprobe_saved_msr = regs->msr; + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ return 1; ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobe_handler(). - */ - preempt_disable(); + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: + preempt_enable_no_resched(); return ret; } @@ -251,9 +251,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -292,12 +293,14 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->nip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); + preempt_enable_no_resched(); /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -323,23 +326,26 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->msr |= kprobe_saved_msr; + resume_execution(cur, regs); + regs->msr |= kcb->kprobe_saved_msr; /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -354,19 +360,20 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; + regs->msr |= kcb->kprobe_saved_msr; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -381,11 +388,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - /* - * Interrupts are not disabled here. We need to disable - * preemption, because kprobe_running() uses smp_processor_id(). - */ - preempt_disable(); switch (val) { case DIE_BPT: if (kprobe_handler(args->regs)) @@ -396,22 +398,25 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - preempt_enable_no_resched(); return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs)); + memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs)); /* setup return addr to the jprobe handler routine */ regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); @@ -431,12 +436,15 @@ void __kprobes jprobe_return_end(void) int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + /* * FIXME - we should ideally be validating that we got here 'cos * of the "trap" in jprobe_return() above, before restoring the * saved regs... */ - memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); + memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs)); + preempt_enable_no_resched(); return 1; } diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index e86155770bbc..9dda16ccde78 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -35,38 +35,13 @@ #include <asm/time.h> #include <asm/iseries/it_exp_vpd_panel.h> #include <asm/prom.h> +#include <asm/vdso_datapage.h> #define MODULE_VERS "1.6" #define MODULE_NAME "lparcfg" /* #define LPARCFG_DEBUG */ -/* find a better place for this function... */ -void log_plpar_hcall_return(unsigned long rc, char *tag) -{ - if (rc == 0) /* success, return */ - return; -/* check for null tag ? */ - if (rc == H_Hardware) - printk(KERN_INFO - "plpar-hcall (%s) failed with hardware fault\n", tag); - else if (rc == H_Function) - printk(KERN_INFO - "plpar-hcall (%s) failed; function not allowed\n", tag); - else if (rc == H_Authority) - printk(KERN_INFO - "plpar-hcall (%s) failed; not authorized to this function\n", - tag); - else if (rc == H_Parameter) - printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", - tag); - else - printk(KERN_INFO - "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", - tag, rc); - -} - static struct proc_dir_entry *proc_ppc64_lparcfg; #define LPARCFG_BUFF_SIZE 4096 @@ -96,7 +71,7 @@ static unsigned long get_purr(void) #define lparcfg_write NULL -/* +/* * Methods used to fetch LPAR data when running on an iSeries platform. */ static int lparcfg_data(struct seq_file *m, void *v) @@ -168,16 +143,41 @@ static int lparcfg_data(struct seq_file *m, void *v) #endif /* CONFIG_PPC_ISERIES */ #ifdef CONFIG_PPC_PSERIES -/* +/* * Methods used to fetch LPAR data when running on a pSeries platform. */ +/* find a better place for this function... */ +static void log_plpar_hcall_return(unsigned long rc, char *tag) +{ + if (rc == 0) /* success, return */ + return; +/* check for null tag ? */ + if (rc == H_Hardware) + printk(KERN_INFO + "plpar-hcall (%s) failed with hardware fault\n", tag); + else if (rc == H_Function) + printk(KERN_INFO + "plpar-hcall (%s) failed; function not allowed\n", tag); + else if (rc == H_Authority) + printk(KERN_INFO + "plpar-hcall (%s) failed; not authorized to this function\n", + tag); + else if (rc == H_Parameter) + printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", + tag); + else + printk(KERN_INFO + "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", + tag, rc); + +} /* * H_GET_PPP hcall returns info in 4 parms. * entitled_capacity,unallocated_capacity, * aggregation, resource_capability). * - * R4 = Entitled Processor Capacity Percentage. + * R4 = Entitled Processor Capacity Percentage. * R5 = Unallocated Processor Capacity Percentage. * R6 (AABBCCDDEEFFGGHH). * XXXX - reserved (0) @@ -190,7 +190,7 @@ static int lparcfg_data(struct seq_file *m, void *v) * XX - variable processor Capacity Weight * XX - Unallocated Variable Processor Capacity Weight. * XXXX - Active processors in Physical Processor Pool. - * XXXX - Processors active on platform. + * XXXX - Processors active on platform. */ static unsigned int h_get_ppp(unsigned long *entitled, unsigned long *unallocated, @@ -212,11 +212,10 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) unsigned long dummy; rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy); - log_plpar_hcall_return(rc, "H_PIC"); + if (rc != H_Authority) + log_plpar_hcall_return(rc, "H_PIC"); } -static unsigned long get_purr(void); - /* Track sum of all purrs across all processors. This is used to further */ /* calculate usage values by different applications */ @@ -273,7 +272,7 @@ static void parse_system_parameter_string(struct seq_file *m) if (!workbuffer) { printk(KERN_ERR "%s %s kmalloc failure at line %d \n", __FILE__, __FUNCTION__, __LINE__); - kfree(local_buffer); + kfree(local_buffer); return; } #ifdef LPARCFG_DEBUG @@ -318,8 +317,6 @@ static void parse_system_parameter_string(struct seq_file *m) kfree(local_buffer); } -static int lparcfg_count_active_processors(void); - /* Return the number of processors in the system. * This function reads through the device tree and counts * the virtual processors, this does not include threads. @@ -371,7 +368,7 @@ static int lparcfg_data(struct seq_file *m, void *v) lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL); if (lrdrp == NULL) { - partition_potential_processors = systemcfg->processorCount; + partition_potential_processors = vdso_data->processorCount; } else { partition_potential_processors = *(lrdrp + 4); } @@ -547,7 +544,7 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EIO; } - out: +out: kfree(kbuf); return retval; } @@ -560,10 +557,10 @@ static int lparcfg_open(struct inode *inode, struct file *file) } struct file_operations lparcfg_fops = { - .owner = THIS_MODULE, - .read = seq_read, - .open = lparcfg_open, - .release = single_release, + .owner = THIS_MODULE, + .read = seq_read, + .open = lparcfg_open, + .release = single_release, }; int __init lparcfg_init(void) @@ -599,9 +596,7 @@ int __init lparcfg_init(void) void __exit lparcfg_cleanup(void) { if (proc_ppc64_lparcfg) { - if (proc_ppc64_lparcfg->data) { - kfree(proc_ppc64_lparcfg->data); - } + kfree(proc_ppc64_lparcfg->data); remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent); } } diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec_64.c index ff8679f260f3..97c51e452be7 100644 --- a/arch/ppc64/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -24,6 +24,7 @@ #include <asm/mmu.h> #include <asm/sections.h> /* _end */ #include <asm/prom.h> +#include <asm/smp.h> #define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ @@ -184,8 +185,8 @@ void kexec_copy_flush(struct kimage *image) */ void kexec_smp_down(void *arg) { - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(1); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 1); local_irq_disable(); kexec_smp_wait(); @@ -232,8 +233,8 @@ static void kexec_prepare_cpus(void) } /* after we tell the others to go down */ - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(0); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 0); put_cpu(); @@ -254,8 +255,8 @@ static void kexec_prepare_cpus(void) * UP to an SMP kernel. */ smp_release_cpus(); - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(0); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 0); local_irq_disable(); } @@ -304,3 +305,54 @@ void machine_kexec(struct kimage *image) ppc_md.hpte_clear_all); /* NOTREACHED */ } + +/* Values we need to export to the second kernel via the device tree. */ +static unsigned long htab_base, htab_size, kernel_end; + +static struct property htab_base_prop = { + .name = "linux,htab-base", + .length = sizeof(unsigned long), + .value = (unsigned char *)&htab_base, +}; + +static struct property htab_size_prop = { + .name = "linux,htab-size", + .length = sizeof(unsigned long), + .value = (unsigned char *)&htab_size, +}; + +static struct property kernel_end_prop = { + .name = "linux,kernel-end", + .length = sizeof(unsigned long), + .value = (unsigned char *)&kernel_end, +}; + +static void __init export_htab_values(void) +{ + struct device_node *node; + + node = of_find_node_by_path("/chosen"); + if (!node) + return; + + kernel_end = __pa(_end); + prom_add_property(node, &kernel_end_prop); + + /* On machines with no htab htab_address is NULL */ + if (NULL == htab_address) + goto out; + + htab_base = __pa(htab_address); + prom_add_property(node, &htab_base_prop); + + htab_size = 1UL << ppc64_pft_size; + prom_add_property(node, &htab_size_prop); + + out: + of_node_put(node); +} + +void __init kexec_setup(void) +{ + export_htab_values(); +} diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 3bedb532aed9..f6d84a75ed26 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -519,7 +519,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) * * flush_icache_range(unsigned long start, unsigned long stop) */ -_GLOBAL(flush_icache_range) +_GLOBAL(__flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) @@ -607,27 +607,6 @@ _GLOBAL(invalidate_dcache_range) sync /* wait for dcbi's to get to ram */ blr -#ifdef CONFIG_NOT_COHERENT_CACHE -/* - * 40x cores have 8K or 16K dcache and 32 byte line size. - * 44x has a 32K dcache and 32 byte line size. - * 8xx has 1, 2, 4, 8K variants. - * For now, cover the worst case of the 44x. - * Must be called with external interrupts disabled. - */ -#define CACHE_NWAYS 64 -#define CACHE_NLINES 16 - -_GLOBAL(flush_dcache_all) - li r4, (2 * CACHE_NWAYS * CACHE_NLINES) - mtctr r4 - lis r5, KERNELBASE@h -1: lwz r3, 0(r5) /* Load one word from every line */ - addi r5, r5, L1_CACHE_BYTES - bdnz 1b - blr -#endif /* CONFIG_NOT_COHERENT_CACHE */ - /* * Flush a particular page from the data cache to RAM. * Note: this is necessary because the instruction cache does *not* diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index b3e95ff0dba0..ae48a002f81a 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_handle_IRQ_event) +_GLOBAL(call___do_IRQ) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event + stdu r1,THREAD_SIZE-112(r5) + mr r1,r5 + bl .__do_IRQ ld r1,0(r1) ld r0,16(r1) mtlr r0 @@ -604,6 +604,76 @@ _GLOBAL(real_writeb) #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ /* + * SCOM access functions for 970 (FX only for now) + * + * unsigned long scom970_read(unsigned int address); + * void scom970_write(unsigned int address, unsigned long value); + * + * The address passed in is the 24 bits register address. This code + * is 970 specific and will not check the status bits, so you should + * know what you are doing. + */ +_GLOBAL(scom970_read) + /* interrupts off */ + mfmsr r4 + ori r0,r4,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd, + * and finally or in RW bit + */ + rlwinm r3,r3,8,0,15 + ori r3,r3,0x8000 + + /* do the actual scom read */ + sync + mtspr SPRN_SCOMC,r3 + isync + mfspr r3,SPRN_SCOMD + isync + mfspr r0,SPRN_SCOMC + isync + + /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah + * that's the best we can do). Not implemented yet as we don't use + * the scom on any of the bogus CPUs yet, but may have to be done + * ultimately + */ + + /* restore interrupts */ + mtmsrd r4,1 + blr + + +_GLOBAL(scom970_write) + /* interrupts off */ + mfmsr r5 + ori r0,r5,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd. + */ + + rlwinm r3,r3,8,0,15 + + sync + mtspr SPRN_SCOMD,r4 /* write data */ + isync + mtspr SPRN_SCOMC,r3 /* write command */ + isync + mfspr 3,SPRN_SCOMC + isync + + /* restore interrupts */ + mtmsrd r5,1 + blr + + +/* * Create a kernel thread * kernel_thread(fn, arg, flags) */ diff --git a/arch/ppc64/kernel/module.c b/arch/powerpc/kernel/module_64.c index 928b8581fcb0..928b8581fcb0 100644 --- a/arch/ppc64/kernel/module.c +++ b/arch/powerpc/kernel/module_64.c diff --git a/arch/ppc64/kernel/pacaData.c b/arch/powerpc/kernel/paca.c index 3133c72b28ec..a7b68f911eb1 100644 --- a/arch/ppc64/kernel/pacaData.c +++ b/arch/powerpc/kernel/paca.c @@ -15,24 +15,16 @@ #include <asm/processor.h> #include <asm/ptrace.h> #include <asm/page.h> - #include <asm/lppaca.h> #include <asm/iseries/it_lp_queue.h> #include <asm/paca.h> -static union { - struct systemcfg data; - u8 page[PAGE_SIZE]; -} systemcfg_store __attribute__((__section__(".data.page.aligned"))); -struct systemcfg *systemcfg = &systemcfg_store.data; -EXPORT_SYMBOL(systemcfg); - /* This symbol is provided by the linker - let it fill in the paca * field correctly */ extern unsigned long __toc_start; -/* The Paca is an array with one entry per processor. Each contains an +/* The Paca is an array with one entry per processor. Each contains an * lppaca, which contains the information shared between the * hypervisor and Linux. Each also contains an ItLpRegSave area which * is used by the hypervisor to save registers. diff --git a/arch/ppc64/kernel/pci.c b/arch/powerpc/kernel/pci_64.c index 3d2106b022a1..5a5b24685081 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/powerpc/kernel/pci_64.c @@ -30,10 +30,10 @@ #include <asm/byteorder.h> #include <asm/irq.h> #include <asm/machdep.h> -#include <asm/udbg.h> #include <asm/ppc-pci.h> #ifdef DEBUG +#include <asm/udbg.h> #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) @@ -187,7 +187,7 @@ static DEFINE_SPINLOCK(hose_spinlock); /* * pci_controller(phb) initialized common variables. */ -void __devinit pci_setup_pci_controller(struct pci_controller *hose) +static void __devinit pci_setup_pci_controller(struct pci_controller *hose) { memset(hose, 0, sizeof(struct pci_controller)); @@ -197,6 +197,65 @@ void __devinit pci_setup_pci_controller(struct pci_controller *hose) spin_unlock(&hose_spinlock); } +static void add_linux_pci_domain(struct device_node *dev, + struct pci_controller *phb) +{ + struct property *of_prop; + unsigned int size; + + of_prop = (struct property *) + get_property(dev, "linux,pci-domain", &size); + if (of_prop != NULL) + return; + WARN_ON(of_prop && size < sizeof(int)); + if (of_prop && size < sizeof(int)) + of_prop = NULL; + size = sizeof(struct property) + sizeof(int); + if (of_prop == NULL) { + if (mem_init_done) + of_prop = kmalloc(size, GFP_KERNEL); + else + of_prop = alloc_bootmem(size); + } + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(int); + of_prop->value = (unsigned char *)&of_prop[1]; + *((int *)of_prop->value) = phb->global_number; + prom_add_property(dev, of_prop); +} + +struct pci_controller * pcibios_alloc_controller(struct device_node *dev) +{ + struct pci_controller *phb; + + if (mem_init_done) + phb = kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + else + phb = alloc_bootmem(sizeof (struct pci_controller)); + if (phb == NULL) + return NULL; + pci_setup_pci_controller(phb); + phb->arch_data = dev; + phb->is_dynamic = mem_init_done; + if (dev) + add_linux_pci_domain(dev, phb); + return phb; +} + +void pcibios_free_controller(struct pci_controller *phb) +{ + if (phb->arch_data) { + struct device_node *np = phb->arch_data; + int *domain = (int *)get_property(np, + "linux,pci-domain", NULL); + if (domain) + *domain = -1; + } + if (phb->is_dynamic) + kfree(phb); +} + static void __init pcibios_claim_one_bus(struct pci_bus *b) { struct pci_dev *dev; @@ -295,8 +354,8 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) } } -static struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn) +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) { struct pci_dev *dev; const char *type; @@ -354,10 +413,9 @@ static struct pci_dev *of_create_pci_dev(struct device_node *node, return dev; } +EXPORT_SYMBOL(of_create_pci_dev); -static void of_scan_pci_bridge(struct device_node *node, struct pci_dev *dev); - -static void __devinit of_scan_bus(struct device_node *node, +void __devinit of_scan_bus(struct device_node *node, struct pci_bus *bus) { struct device_node *child = NULL; @@ -381,9 +439,10 @@ static void __devinit of_scan_bus(struct device_node *node, do_bus_setup(bus); } +EXPORT_SYMBOL(of_scan_bus); -static void __devinit of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev) +void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) { struct pci_bus *bus; u32 *busrange, *ranges; @@ -464,9 +523,10 @@ static void __devinit of_scan_pci_bridge(struct device_node *node, else if (mode == PCI_PROBE_NORMAL) pci_scan_child_bus(bus); } +EXPORT_SYMBOL(of_scan_pci_bridge); #endif /* CONFIG_PPC_MULTIPLATFORM */ -static void __devinit scan_phb(struct pci_controller *hose) +void __devinit scan_phb(struct pci_controller *hose) { struct pci_bus *bus; struct device_node *node = hose->arch_data; @@ -547,6 +607,11 @@ static int __init pcibios_init(void) if (ppc64_isabridge_dev != NULL) printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); +#ifdef CONFIG_PPC_MULTIPLATFORM + /* map in PCI I/O space */ + phbs_remap_io(); +#endif + printk("PCI: Probing PCI hardware done\n"); return 0; @@ -901,9 +966,10 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, * (size depending on dev->n_addr_cells) * cells 4+5 or 5+6: the size of the range */ - rlen = 0; - hose->io_base_phys = 0; ranges = (unsigned int *) get_property(dev, "ranges", &rlen); + if (ranges == NULL) + return; + hose->io_base_phys = 0; while ((rlen -= np * sizeof(unsigned int)) >= 0) { res = NULL; pci_space = ranges[0]; @@ -1101,6 +1167,8 @@ int remap_bus_range(struct pci_bus *bus) if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) return 1; + if (start_phys == 0) + return 1; printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); if (__ioremap_explicit(start_phys, start_virt, size, _PAGE_NO_CACHE | _PAGE_GUARDED)) @@ -1276,12 +1344,9 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, * G5 machines... So when something asks for bus 0 io base * (bus 0 is HT root), we return the AGP one instead. */ -#ifdef CONFIG_PPC_PMAC - if (systemcfg->platform == PLATFORM_POWERMAC && - machine_is_compatible("MacRISC4")) + if (machine_is_compatible("MacRISC4")) if (in_bus == 0) in_bus = 0xf0; -#endif /* CONFIG_PPC_PMAC */ /* That syscall isn't quite compatible with PCI domains, but it's * used on pre-domains setup. We return the first match diff --git a/arch/ppc64/kernel/pci_direct_iommu.c b/arch/powerpc/kernel/pci_direct_iommu.c index e1a32f802c0b..e1a32f802c0b 100644 --- a/arch/ppc64/kernel/pci_direct_iommu.c +++ b/arch/powerpc/kernel/pci_direct_iommu.c diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index 1a443a7ada4c..12c4c9e9bbc7 100644 --- a/arch/ppc64/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -43,7 +43,7 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) u32 *regs; struct pci_dn *pdn; - if (phb->is_dynamic) + if (mem_init_done) pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); else pdn = alloc_bootmem(sizeof(*pdn)); @@ -120,6 +120,14 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, return NULL; } +/** + * pci_devs_phb_init_dynamic - setup pci devices under this PHB + * phb: pci-to-host bridge (top-level bridge connecting to cpu) + * + * This routine is called both during boot, (before the memory + * subsystem is set up, before kmalloc is valid) and during the + * dynamic lpar operation of adding a PHB to a running system. + */ void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) { struct device_node * dn = (struct device_node *) phb->arch_data; @@ -201,9 +209,14 @@ static struct notifier_block pci_dn_reconfig_nb = { .notifier_call = pci_dn_reconfig_notifier, }; -/* - * Actually initialize the phbs. - * The buswalk on this phb has not happened yet. +/** + * pci_devs_phb_init - Initialize phbs and pci devs under them. + * + * This routine walks over all phb's (pci-host bridges) on the + * system, and sets up assorted pci-related structures + * (including pci info in the device node structs) for each + * pci device found underneath. This routine runs once, + * early in the boot sequence. */ void __init pci_devs_phb_init(void) { diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c index bdf15dbbf4f0..bdf15dbbf4f0 100644 --- a/arch/ppc64/kernel/pci_iommu.c +++ b/arch/powerpc/kernel/pci_iommu.c diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 47d6f7e2ea9f..59846b40d521 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -44,6 +44,7 @@ #include <asm/cputable.h> #include <asm/btext.h> #include <asm/div64.h> +#include <asm/signal.h> #ifdef CONFIG_8xx #include <asm/commproc.h> @@ -56,7 +57,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int do_signal(sigset_t *, struct pt_regs *); extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); @@ -105,6 +105,13 @@ EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(__strnlen_user); +#ifndef __powerpc64__ +EXPORT_SYMBOL(__ide_mm_insl); +EXPORT_SYMBOL(__ide_mm_outsw); +EXPORT_SYMBOL(__ide_mm_insw); +EXPORT_SYMBOL(__ide_mm_outsl); +#endif + EXPORT_SYMBOL(_insb); EXPORT_SYMBOL(_outsb); EXPORT_SYMBOL(_insw); @@ -188,9 +195,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_PPC32) -EXPORT_SYMBOL(_machine); -#endif #ifdef CONFIG_PPC_PMAC EXPORT_SYMBOL(sys_ctrler); #endif diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c index 24e955ee9487..7ba42a405f41 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/powerpc/kernel/proc_ppc64.c @@ -1,18 +1,16 @@ /* - * arch/ppc64/kernel/proc_ppc64.c - * * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -25,7 +23,7 @@ #include <linux/slab.h> #include <linux/kernel.h> -#include <asm/systemcfg.h> +#include <asm/vdso_datapage.h> #include <asm/rtas.h> #include <asm/uaccess.h> #include <asm/prom.h> @@ -53,7 +51,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_CELL))) + if (!(platform_is_pseries() || _machine == PLATFORM_CELL)) return 0; if (!proc_mkdir("rtas", root)) @@ -74,7 +72,7 @@ static int __init proc_ppc64_init(void) if (!pde) return 1; pde->nlink = 1; - pde->data = systemcfg; + pde->data = vdso_data; pde->size = PAGE_SIZE; pde->proc_fops = &page_map_fops; diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 7f64f0464d44..de69fb37c731 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -46,10 +46,10 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/prom.h> +#include <asm/machdep.h> #ifdef CONFIG_PPC64 #include <asm/firmware.h> #include <asm/time.h> -#include <asm/machdep.h> #endif extern unsigned long _get_SP(void); @@ -203,10 +203,8 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs) int set_dabr(unsigned long dabr) { -#ifdef CONFIG_PPC64 if (ppc_md.set_dabr) return ppc_md.set_dabr(dabr); -#endif mtspr(SPRN_DABR, dabr); return 0; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 3675ef4bac90..3bf968e74095 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -48,9 +48,6 @@ #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> -#ifdef CONFIG_PPC64 -#include <asm/systemcfg.h> -#endif #ifdef DEBUG #define DBG(fmt...) printk(KERN_ERR fmt) @@ -74,10 +71,6 @@ struct isa_reg_property { typedef int interpret_func(struct device_node *, unsigned long *, int, int, int); -extern struct rtas_t rtas; -extern struct lmb lmb; -extern unsigned long klimit; - static int __initdata dt_root_addr_cells; static int __initdata dt_root_size_cells; @@ -391,7 +384,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, #ifdef CONFIG_PPC64 /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { + if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; @@ -1087,9 +1080,9 @@ void __init unflatten_device_tree(void) static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); u32 *prop; - unsigned long size = 0; + unsigned long size; + char *type = of_get_flat_dt_prop(node, "device_type", &size); /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) @@ -1115,7 +1108,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, #ifdef CONFIG_ALTIVEC /* Check if we have a VMX and eventually update CPU features */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", &size); + prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL); if (prop && (*prop) > 0) { cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; @@ -1161,13 +1154,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node, prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); if (prop == NULL) return 0; -#ifdef CONFIG_PPC64 - systemcfg->platform = *prop; -#else #ifdef CONFIG_PPC_MULTIPLATFORM _machine = *prop; #endif -#endif #ifdef CONFIG_PPC64 /* check if iommu is forced on or off */ @@ -1264,7 +1253,14 @@ static int __init early_init_dt_scan_memory(unsigned long node, unsigned long l; /* We are scanning "memory" nodes only */ - if (type == NULL || strcmp(type, "memory") != 0) + if (type == NULL) { + /* + * The longtrail doesn't have a device_type on the + * /memory node, so look for the node called /memory@0. + */ + if (depth != 1 || strcmp(uname, "memory@0") != 0) + return 0; + } else if (strcmp(type, "memory") != 0) return 0; reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); @@ -1339,9 +1335,6 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_memory, NULL); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); -#ifdef CONFIG_PPC64 - systemcfg->physicalMemorySize = lmb_phys_mem_size(); -#endif lmb_reserve(0, __pa(klimit)); DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); @@ -1375,6 +1368,7 @@ prom_n_addr_cells(struct device_node* np) /* No #address-cells property for the root node, default to 1 */ return 1; } +EXPORT_SYMBOL(prom_n_addr_cells); int prom_n_size_cells(struct device_node* np) @@ -1390,6 +1384,7 @@ prom_n_size_cells(struct device_node* np) /* No #size-cells property for the root node, default to 1 */ return 1; } +EXPORT_SYMBOL(prom_n_size_cells); /** * Work out the sense (active-low level / active-high edge) @@ -1908,7 +1903,7 @@ static int of_finish_dynamic_node(struct device_node *node, /* We don't support that function on PowerMac, at least * not yet */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENODEV; /* fix up new node's linux_phandle field */ @@ -1974,14 +1969,31 @@ EXPORT_SYMBOL(get_property); /* * Add a property to a node */ -void prom_add_property(struct device_node* np, struct property* prop) +int prom_add_property(struct device_node* np, struct property* prop) { - struct property **next = &np->properties; + struct property **next; prop->next = NULL; - while (*next) + write_lock(&devtree_lock); + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) { + /* duplicate ! don't insert it */ + write_unlock(&devtree_lock); + return -1; + } next = &(*next)->next; + } *next = prop; + write_unlock(&devtree_lock); + +#ifdef CONFIG_PROC_DEVICETREE + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_add_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; } /* I quickly hacked that one, check against spec ! */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index c758b6624d7b..4ce0105c308e 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -94,11 +94,17 @@ extern const struct linux_logo logo_linux_clut224; #ifdef CONFIG_PPC64 #define RELOC(x) (*PTRRELOC(&(x))) #define ADDR(x) (u32) add_reloc_offset((unsigned long)(x)) +#define OF_WORKAROUNDS 0 #else #define RELOC(x) (x) #define ADDR(x) (u32) (x) +#define OF_WORKAROUNDS of_workarounds +int of_workarounds; #endif +#define OF_WA_CLAIM 1 /* do phys/virt claim separately, then map */ +#define OF_WA_LONGTRAIL 2 /* work around longtrail bugs */ + #define PROM_BUG() do { \ prom_printf("kernel BUG at %s line 0x%x!\n", \ RELOC(__FILE__), __LINE__); \ @@ -111,11 +117,6 @@ extern const struct linux_logo logo_linux_clut224; #define prom_debug(x...) #endif -#ifdef CONFIG_PPC32 -#define PLATFORM_POWERMAC _MACH_Pmac -#define PLATFORM_CHRP _MACH_chrp -#endif - typedef u32 prom_arg_t; @@ -128,10 +129,11 @@ struct prom_args { struct prom_t { ihandle root; - ihandle chosen; + phandle chosen; int cpu; ihandle stdout; ihandle mmumap; + ihandle memory; }; struct mem_map_entry { @@ -360,16 +362,36 @@ static void __init prom_printf(const char *format, ...) static unsigned int __init prom_claim(unsigned long virt, unsigned long size, unsigned long align) { - int ret; struct prom_t *_prom = &RELOC(prom); - ret = call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size, - (prom_arg_t)align); - if (ret != -1 && _prom->mmumap != 0) - /* old pmacs need us to map as well */ + if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) { + /* + * Old OF requires we claim physical and virtual separately + * and then map explicitly (assuming virtual mode) + */ + int ret; + prom_arg_t result; + + ret = call_prom_ret("call-method", 5, 2, &result, + ADDR("claim"), _prom->memory, + align, size, virt); + if (ret != 0 || result == -1) + return -1; + ret = call_prom_ret("call-method", 5, 2, &result, + ADDR("claim"), _prom->mmumap, + align, size, virt); + if (ret != 0) { + call_prom("call-method", 4, 1, ADDR("release"), + _prom->memory, size, virt); + return -1; + } + /* the 0x12 is M (coherence) + PP == read/write */ call_prom("call-method", 6, 1, - ADDR("map"), _prom->mmumap, 0, size, virt, virt); - return ret; + ADDR("map"), _prom->mmumap, 0x12, size, virt, virt); + return virt; + } + return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size, + (prom_arg_t)align); } static void __init __attribute__((noreturn)) prom_panic(const char *reason) @@ -403,23 +425,64 @@ static int __init prom_next_node(phandle *nodep) } } -static int __init prom_getprop(phandle node, const char *pname, +static int inline prom_getprop(phandle node, const char *pname, void *value, size_t valuelen) { return call_prom("getprop", 4, 1, node, ADDR(pname), (u32)(unsigned long) value, (u32) valuelen); } -static int __init prom_getproplen(phandle node, const char *pname) +static int inline prom_getproplen(phandle node, const char *pname) { return call_prom("getproplen", 2, 1, node, ADDR(pname)); } -static int __init prom_setprop(phandle node, const char *pname, - void *value, size_t valuelen) +static void add_string(char **str, const char *q) { - return call_prom("setprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); + char *p = *str; + + while (*q) + *p++ = *q++; + *p++ = ' '; + *str = p; +} + +static char *tohex(unsigned int x) +{ + static char digits[] = "0123456789abcdef"; + static char result[9]; + int i; + + result[8] = 0; + i = 8; + do { + --i; + result[i] = digits[x & 0xf]; + x >>= 4; + } while (x != 0 && i > 0); + return &result[i]; +} + +static int __init prom_setprop(phandle node, const char *nodename, + const char *pname, void *value, size_t valuelen) +{ + char cmd[256], *p; + + if (!(OF_WORKAROUNDS & OF_WA_LONGTRAIL)) + return call_prom("setprop", 4, 1, node, ADDR(pname), + (u32)(unsigned long) value, (u32) valuelen); + + /* gah... setprop doesn't work on longtrail, have to use interpret */ + p = cmd; + add_string(&p, "dev"); + add_string(&p, nodename); + add_string(&p, tohex((u32)(unsigned long) value)); + add_string(&p, tohex(valuelen)); + add_string(&p, tohex(ADDR(pname))); + add_string(&p, tohex(strlen(RELOC(pname)))); + add_string(&p, "property"); + *p = 0; + return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); } /* We can't use the standard versions because of RELOC headaches. */ @@ -980,7 +1043,7 @@ static void __init prom_instantiate_rtas(void) rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); if (!IHANDLE_VALID(rtas_inst)) { - prom_printf("opening rtas package failed"); + prom_printf("opening rtas package failed (%x)\n", rtas_inst); return; } @@ -988,7 +1051,7 @@ static void __init prom_instantiate_rtas(void) if (call_prom_ret("call-method", 3, 2, &entry, ADDR("instantiate-rtas"), - rtas_inst, base) == PROM_ERROR + rtas_inst, base) != 0 || entry == 0) { prom_printf(" failed\n"); return; @@ -997,8 +1060,10 @@ static void __init prom_instantiate_rtas(void) reserve_mem(base, size); - prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); + prom_setprop(rtas_node, "/rtas", "linux,rtas-base", + &base, sizeof(base)); + prom_setprop(rtas_node, "/rtas", "linux,rtas-entry", + &entry, sizeof(entry)); prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1089,10 +1154,6 @@ static void __init prom_initialize_tce_table(void) if (base < local_alloc_bottom) local_alloc_bottom = base; - /* Save away the TCE table attributes for later use. */ - prom_setprop(node, "linux,tce-base", &base, sizeof(base)); - prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize)); - /* It seems OF doesn't null-terminate the path :-( */ memset(path, 0, sizeof(path)); /* Call OF to setup the TCE hardware */ @@ -1101,6 +1162,10 @@ static void __init prom_initialize_tce_table(void) prom_printf("package-to-path failed\n"); } + /* Save away the TCE table attributes for later use. */ + prom_setprop(node, path, "linux,tce-base", &base, sizeof(base)); + prom_setprop(node, path, "linux,tce-size", &minsize, sizeof(minsize)); + prom_debug("TCE table: %s\n", path); prom_debug("\tnode = 0x%x\n", node); prom_debug("\tbase = 0x%x\n", base); @@ -1342,6 +1407,7 @@ static void __init prom_init_client_services(unsigned long pp) /* * For really old powermacs, we need to map things we claim. * For that, we need the ihandle of the mmu. + * Also, on the longtrail, we need to work around other bugs. */ static void __init prom_find_mmu(void) { @@ -1355,12 +1421,19 @@ static void __init prom_find_mmu(void) if (prom_getprop(oprom, "model", version, sizeof(version)) <= 0) return; version[sizeof(version) - 1] = 0; - prom_printf("OF version is '%s'\n", version); /* XXX might need to add other versions here */ - if (strcmp(version, "Open Firmware, 1.0.5") != 0) + if (strcmp(version, "Open Firmware, 1.0.5") == 0) + of_workarounds = OF_WA_CLAIM; + else if (strncmp(version, "FirmWorks,3.", 12) == 0) { + of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL; + call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim"); + } else return; + _prom->memory = call_prom("open", 1, 1, ADDR("/memory")); prom_getprop(_prom->chosen, "mmu", &_prom->mmumap, sizeof(_prom->mmumap)); + if (!IHANDLE_VALID(_prom->memory) || !IHANDLE_VALID(_prom->mmumap)) + of_workarounds &= ~OF_WA_CLAIM; /* hmmm */ } #else #define prom_find_mmu() @@ -1382,16 +1455,17 @@ static void __init prom_init_stdout(void) memset(path, 0, 256); call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255); val = call_prom("instance-to-package", 1, 1, _prom->stdout); - prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,stdout-package", + &val, sizeof(val)); prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device)); - prom_setprop(_prom->chosen, "linux,stdout-path", - RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1); + prom_setprop(_prom->chosen, "/chosen", "linux,stdout-path", + path, strlen(path) + 1); /* If it's a display, note it */ memset(type, 0, sizeof(type)); prom_getprop(val, "device_type", type, sizeof(type)); if (strcmp(type, RELOC("display")) == 0) - prom_setprop(val, "linux,boot-display", NULL, 0); + prom_setprop(val, path, "linux,boot-display", NULL, 0); } static void __init prom_close_stdin(void) @@ -1408,8 +1482,9 @@ static int __init prom_find_machine_type(void) struct prom_t *_prom = &RELOC(prom); char compat[256]; int len, i = 0; +#ifdef CONFIG_PPC64 phandle rtas; - +#endif len = prom_getprop(_prom->root, "compatible", compat, sizeof(compat)-1); if (len > 0) { @@ -1513,7 +1588,7 @@ static void __init prom_check_displays(void) /* Success */ prom_printf("done\n"); - prom_setprop(node, "linux,opened", NULL, 0); + prom_setprop(node, path, "linux,opened", NULL, 0); /* Setup a usable color table when the appropriate * method is available. Should update this to set-colors */ @@ -1872,7 +1947,7 @@ static void __init fixup_device_tree(void) if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) == PROM_ERROR) return; - if (u3_rev != 0x35 && u3_rev != 0x37) + if (u3_rev < 0x35 || u3_rev > 0x39) return; /* does it need fixup ? */ if (prom_getproplen(i2c, "interrupts") > 0) @@ -1883,9 +1958,11 @@ static void __init fixup_device_tree(void) /* interrupt on this revision of u3 is number 0 and level */ interrupts[0] = 0; interrupts[1] = 1; - prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); + prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupts", + &interrupts, sizeof(interrupts)); parent = (u32)mpic; - prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); + prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent", + &parent, sizeof(parent)); #endif } @@ -1921,11 +1998,11 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4) RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; val = RELOC(prom_initrd_start); - prom_setprop(_prom->chosen, "linux,initrd-start", &val, - sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,initrd-start", + &val, sizeof(val)); val = RELOC(prom_initrd_end); - prom_setprop(_prom->chosen, "linux,initrd-end", &val, - sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,initrd-end", + &val, sizeof(val)); reserve_mem(RELOC(prom_initrd_start), RELOC(prom_initrd_end) - RELOC(prom_initrd_start)); @@ -1968,14 +2045,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, prom_init_client_services(pp); /* - * Init prom stdout device + * See if this OF is old enough that we need to do explicit maps + * and other workarounds */ - prom_init_stdout(); + prom_find_mmu(); /* - * See if this OF is old enough that we need to do explicit maps + * Init prom stdout device */ - prom_find_mmu(); + prom_init_stdout(); /* * Check for an initrd @@ -1988,14 +2066,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ RELOC(of_platform) = prom_find_machine_type(); getprop_rval = RELOC(of_platform); - prom_setprop(_prom->chosen, "linux,platform", + prom_setprop(_prom->chosen, "/chosen", "linux,platform", &getprop_rval, sizeof(getprop_rval)); #ifdef CONFIG_PPC_PSERIES /* * On pSeries, inform the firmware about our capabilities */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) == PLATFORM_PSERIES || + RELOC(of_platform) == PLATFORM_PSERIES_LPAR) prom_send_capabilities(); #endif @@ -2049,21 +2128,23 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * Fill in some infos for use by the kernel later on */ if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "linux,memory-limit", + prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit", &RELOC(prom_memory_limit), sizeof(prom_memory_limit)); #ifdef CONFIG_PPC64 if (RELOC(ppc64_iommu_off)) - prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0); + prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", + NULL, 0); if (RELOC(iommu_force_on)) - prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0); + prom_setprop(_prom->chosen, "/chosen", "linux,iommu-force-on", + NULL, 0); if (RELOC(prom_tce_alloc_start)) { - prom_setprop(_prom->chosen, "linux,tce-alloc-start", + prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-start", &RELOC(prom_tce_alloc_start), sizeof(prom_tce_alloc_start)); - prom_setprop(_prom->chosen, "linux,tce-alloc-end", + prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-end", &RELOC(prom_tce_alloc_end), sizeof(prom_tce_alloc_end)); } @@ -2080,8 +2161,13 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, prom_printf("copying OF device tree ...\n"); flatten_device_tree(); - /* in case stdin is USB and still active on IBM machines... */ - prom_close_stdin(); + /* + * in case stdin is USB and still active on IBM machines... + * Unfortunately quiesce crashes on some powermacs if we have + * closed stdin already (in particular the powerbook 101). + */ + if (RELOC(of_platform) != PLATFORM_POWERMAC) + prom_close_stdin(); /* * Call OF "quiesce" method to shut down pending DMA's from diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 568ea335d616..3d2abd95c7ae 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -248,46 +248,10 @@ void ptrace_disable(struct task_struct *child) clear_single_step(child); } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret = -EPERM; - lock_kernel(); - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -540,10 +504,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 5bdd5b079d96..7a95b8a28354 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -32,7 +32,6 @@ #include <asm/rtas.h> #include <asm/machdep.h> /* for ppc_md */ #include <asm/time.h> -#include <asm/systemcfg.h> /* Token for Sensors */ #define KEY_SWITCH 0x0001 @@ -259,7 +258,7 @@ static int __init proc_rtas_init(void) { struct proc_dir_entry *entry; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR) return 1; rtas_node = of_find_node_by_name(NULL, "rtas"); diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c new file mode 100644 index 000000000000..7b948662704c --- /dev/null +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -0,0 +1,105 @@ +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/rtc.h> +#include <linux/delay.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/time.h> + + +#define MAX_RTC_WAIT 5000 /* 5 sec */ +#define RTAS_CLOCK_BUSY (-2) +unsigned long __init rtas_get_boot_time(void) +{ + int ret[8]; + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + wait_time = rtas_extended_busy_delay_time(error); + /* This is boot time so we spin. */ + udelay(wait_time*1000); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) { + printk(KERN_WARNING "error: reading the clock failed (%d)\n", + error); + return 0; + } + + return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]); +} + +/* NOTE: get_rtc_time will get an error if executed in interrupt context + * and if a delay is needed to read the clock. In this case we just + * silently return without updating rtc_tm. + */ +void rtas_get_rtc_time(struct rtc_time *rtc_tm) +{ + int ret[8]; + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + if (in_interrupt() && printk_ratelimit()) { + memset(&rtc_tm, 0, sizeof(struct rtc_time)); + printk(KERN_WARNING "error: reading clock" + " would delay interrupt\n"); + return; /* delay not allowed */ + } + wait_time = rtas_extended_busy_delay_time(error); + msleep(wait_time); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) { + printk(KERN_WARNING "error: reading the clock failed (%d)\n", + error); + return; + } + + rtc_tm->tm_sec = ret[5]; + rtc_tm->tm_min = ret[4]; + rtc_tm->tm_hour = ret[3]; + rtc_tm->tm_mday = ret[2]; + rtc_tm->tm_mon = ret[1] - 1; + rtc_tm->tm_year = ret[0] - 1900; +} + +int rtas_set_rtc_time(struct rtc_time *tm) +{ + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL, + tm->tm_year + 1900, tm->tm_mon + 1, + tm->tm_mday, tm->tm_hour, tm->tm_min, + tm->tm_sec, 0); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + if (in_interrupt()) + return 1; /* probably decrementer */ + wait_time = rtas_extended_busy_delay_time(error); + msleep(wait_time); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) + printk(KERN_WARNING "error: setting the clock failed (%d)\n", + error); + + return 0; +} diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index b7fc2d884950..4283fa33f784 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -17,6 +17,7 @@ #include <linux/spinlock.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/delay.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -28,9 +29,6 @@ #include <asm/delay.h> #include <asm/uaccess.h> #include <asm/lmb.h> -#ifdef CONFIG_PPC64 -#include <asm/systemcfg.h> -#endif struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED @@ -83,7 +81,7 @@ void call_rtas_display_status_delay(unsigned char c) while (width-- > 0) call_rtas_display_status(' '); width = 16; - udelay(500000); + mdelay(500); pending_newline = 1; } else { if (pending_newline) { @@ -608,7 +606,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) return 0; } -#ifdef CONFIG_SMP /* This version can't take the spinlock, because it never returns */ struct rtas_args rtas_stop_self_args = { @@ -633,7 +630,6 @@ void rtas_stop_self(void) panic("Alas, I survived.\n"); } -#endif /* * Call early during boot, before mem init or bootmem, to retreive the RTAS @@ -672,7 +668,7 @@ void __init rtas_initialize(void) * the stop-self token if any */ #ifdef CONFIG_PPC64 - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + if (_machine == PLATFORM_PSERIES_LPAR) rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); #endif rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 3ad15c90fbbd..60dec2401c26 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -5,19 +5,19 @@ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM * * RTAS specific routines for PCI. - * + * * Based on code from pci.c, chrp_pci.c and pSeries_pci.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -47,7 +47,7 @@ static int write_pci_config; static int ibm_read_pci_config; static int ibm_write_pci_config; -static int config_access_valid(struct pci_dn *dn, int where) +static inline int config_access_valid(struct pci_dn *dn, int where) { if (where < 256) return 1; @@ -72,16 +72,14 @@ static int of_device_available(struct device_node * dn) return 0; } -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) +static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) { int returnval = -1; unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -90,7 +88,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); + addr, BUID_HI(buid), BUID_LO(buid), size); } else { ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); } @@ -100,7 +98,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va return PCIBIOS_DEVICE_NOT_FOUND; if (returnval == EEH_IO_ERROR_VALUE(size) && - eeh_dn_check_failure (dn, NULL)) + eeh_dn_check_failure (pdn->node, NULL)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; @@ -118,23 +116,23 @@ static int rtas_pci_read_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_read_config(dn, where, size, val); + return rtas_read_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } -int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) { unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -142,7 +140,8 @@ int rtas_write_config(struct device_node *dn, int where, int size, u32 val) (pdn->devfn << 8) | (where & 0xff); buid = pdn->phb->buid; if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, + BUID_HI(buid), BUID_LO(buid), size, (ulong) val); } else { ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); } @@ -165,10 +164,12 @@ static int rtas_pci_write_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_write_config(dn, where, size, val); + return rtas_write_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } @@ -221,7 +222,7 @@ static void python_countermeasures(struct device_node *dev, /* Python's register file is 1 MB in size. */ chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - /* + /* * Firmware doesn't always clear this bit which is critical * for good performance - Anton */ @@ -292,7 +293,7 @@ static int phb_set_bus_ranges(struct device_node *dev, if (bus_range == NULL || len < 2 * sizeof(int)) { return 1; } - + phb->first_busno = bus_range[0]; phb->last_busno = bus_range[1]; @@ -303,75 +304,18 @@ static int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb, unsigned int addr_size_words) { - pci_setup_pci_controller(phb); - if (is_python(dev)) python_countermeasures(dev, addr_size_words); if (phb_set_bus_ranges(dev, phb)) return 1; - phb->arch_data = dev; phb->ops = &rtas_pci_ops; phb->buid = get_phb_buid(dev); return 0; } -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - unsigned long __init find_and_init_phbs(void) { struct device_node *node; @@ -396,10 +340,10 @@ unsigned long __init find_and_init_phbs(void) if (node->type == NULL || strcmp(node->type, "pci") != 0) continue; - phb = alloc_phb(node, root_size_cells); + phb = pcibios_alloc_controller(node); if (!phb) continue; - + setup_phb(node, phb, root_size_cells); pci_process_bridge_OF_ranges(phb, node, 0); pci_setup_phb_io(phb, index == 0); #ifdef CONFIG_PPC_PSERIES @@ -440,26 +384,22 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) struct device_node *root = of_find_node_by_path("/"); unsigned int root_size_cells = 0; struct pci_controller *phb; - struct pci_bus *bus; int primary; root_size_cells = prom_n_size_cells(root); primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); + phb = pcibios_alloc_controller(dn); if (!phb) return NULL; - + setup_phb(dn, phb, root_size_cells); pci_process_bridge_OF_ranges(phb, dn, primary); pci_setup_phb_io_dynamic(phb, primary); of_node_put(root); pci_devs_phb_init_dynamic(phb); - phb->last_busno = 0xff; - bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); - phb->bus = bus; - phb->last_busno = bus->subordinate; + scan_phb(phb); return phb; } @@ -508,8 +448,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb) } list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); + pcibios_free_controller(phb); return 0; } diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index d43fa8c0e5ac..bd3eb4292b53 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -33,6 +33,7 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> +#include <asm/vdso_datapage.h> #include <asm/pgtable.h> #include <asm/smp.h> #include <asm/elf.h> @@ -51,15 +52,26 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/lmb.h> +#include <asm/xmon.h> + +#include "setup.h" #undef DEBUG #ifdef DEBUG +#include <asm/udbg.h> #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) #endif +#ifdef CONFIG_PPC_MULTIPLATFORM +int _machine = 0; +EXPORT_SYMBOL(_machine); +#endif + +unsigned long klimit = (unsigned long) _end; + /* * This still seems to be needed... -- paulus */ @@ -405,6 +417,44 @@ static int __init set_preferred_console(void) console_initcall(set_preferred_console); #endif /* CONFIG_PPC_MULTIPLATFORM */ +void __init check_for_initrd(void) +{ +#ifdef CONFIG_BLK_DEV_INITRD + unsigned long *prop; + + DBG(" -> check_for_initrd()\n"); + + if (of_chosen) { + prop = (unsigned long *)get_property(of_chosen, + "linux,initrd-start", NULL); + if (prop != NULL) { + initrd_start = (unsigned long)__va(*prop); + prop = (unsigned long *)get_property(of_chosen, + "linux,initrd-end", NULL); + if (prop != NULL) { + initrd_end = (unsigned long)__va(*prop); + initrd_below_start_ok = 1; + } else + initrd_start = 0; + } + } + + /* If we were passed an initrd, set the ROOT_DEV properly if the values + * look sensible. If not, clear initrd reference. + */ + if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && + initrd_end > initrd_start) + ROOT_DEV = Root_RAM0; + else + initrd_start = initrd_end = 0; + + if (initrd_start) + printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); + + DBG(" <- check_for_initrd()\n"); +#endif /* CONFIG_BLK_DEV_INITRD */ +} + #ifdef CONFIG_SMP /** @@ -470,8 +520,8 @@ void __init smp_setup_cpu_maps(void) * On pSeries LPAR, we need to know how many cpus * could possibly be added to this partition. */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && - (dn = of_find_node_by_path("/rtas"))) { + if (_machine == PLATFORM_PSERIES_LPAR && + (dn = of_find_node_by_path("/rtas"))) { int num_addr_cell, num_size_cell, maxcpus; unsigned int *ireg; @@ -515,7 +565,27 @@ void __init smp_setup_cpu_maps(void) cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); } - systemcfg->processorCount = num_present_cpus(); + vdso_data->processorCount = num_present_cpus(); #endif /* CONFIG_PPC64 */ } #endif /* CONFIG_SMP */ + +#ifdef CONFIG_XMON +static int __init early_xmon(char *p) +{ + /* ensure xmon is enabled */ + if (p) { + if (strncmp(p, "on", 2) == 0) + xmon_init(1); + if (strncmp(p, "off", 3) == 0) + xmon_init(0); + if (strncmp(p, "early", 5) != 0) + return 0; + } + xmon_init(1); + debugger(NULL); + + return 0; +} +early_param("xmon", early_xmon); +#endif diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h new file mode 100644 index 000000000000..2ebba755272e --- /dev/null +++ b/arch/powerpc/kernel/setup.h @@ -0,0 +1,6 @@ +#ifndef _POWERPC_KERNEL_SETUP_H +#define _POWERPC_KERNEL_SETUP_H + +void check_for_initrd(void); + +#endif /* _POWERPC_KERNEL_SETUP_H */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index b45eedbb4b3a..e5694335bf10 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -40,6 +40,8 @@ #include <asm/xmon.h> #include <asm/time.h> +#include "setup.h" + #define DBG(fmt...) #if defined CONFIG_KGDB @@ -55,10 +57,6 @@ extern void power4_idle(void); boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; -/* XXX should go elsewhere */ -int __irq_offset_value; -EXPORT_SYMBOL(__irq_offset_value); - int boot_cpuid; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; @@ -70,8 +68,6 @@ unsigned int DMA_MODE_WRITE; int have_of = 1; #ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; - extern void prep_init(void); extern void pmac_init(void); extern void chrp_init(void); @@ -279,13 +275,13 @@ arch_initcall(ppc_init); /* Warning, IO base is not yet inited */ void __init setup_arch(char **cmdline_p) { - extern char *klimit; extern void do_init_bootmem(void); /* so udelay does something sensible, assume <= 1000 bogomips */ loops_per_jiffy = 500000000 / HZ; unflatten_device_tree(); + check_for_initrd(); finish_device_tree(); smp_setup_cpu_maps(); @@ -302,14 +298,9 @@ void __init setup_arch(char **cmdline_p) pmac_feature_init(); /* New cool way */ #endif -#ifdef CONFIG_XMON - xmon_map_scc(); - if (strstr(cmd_line, "xmon")) { - xmon_init(1); - debugger(NULL); - } -#endif /* CONFIG_XMON */ - if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab); +#ifdef CONFIG_XMON_DEFAULT + xmon_init(1); +#endif #if defined(CONFIG_KGDB) if (ppc_md.kgdb_map_scc) @@ -342,7 +333,7 @@ void __init setup_arch(char **cmdline_p) init_mm.start_code = PAGE_OFFSET; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) klimit; + init_mm.brk = klimit; /* Save unparsed command line copy for /proc/cmdline */ strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index b0994050024f..608fee7c7e20 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -41,7 +41,6 @@ #include <asm/elf.h> #include <asm/machdep.h> #include <asm/paca.h> -#include <asm/ppcdebug.h> #include <asm/time.h> #include <asm/cputable.h> #include <asm/sections.h> @@ -58,8 +57,11 @@ #include <asm/lmb.h> #include <asm/iseries/it_lp_naca.h> #include <asm/firmware.h> -#include <asm/systemcfg.h> #include <asm/xmon.h> +#include <asm/udbg.h> +#include <asm/kexec.h> + +#include "setup.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -94,15 +96,6 @@ extern void udbg_init_maple_realmode(void); do { udbg_putc = call_rtas_display_status_delay; } while(0) #endif -/* extern void *stab; */ -extern unsigned long klimit; - -extern void mm_init_ppc64(void); -extern void stab_initialize(unsigned long stab); -extern void htab_initialize(void); -extern void early_init_devtree(void *flat_dt); -extern void unflatten_device_tree(void); - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -244,12 +237,6 @@ void __init early_setup(unsigned long dt_ptr) DBG(" -> early_setup()\n"); /* - * Fill the default DBG level (do we want to keep - * that old mecanism around forever ?) - */ - ppcdbg_initialize(); - - /* * Do early initializations using the flattened device * tree, like retreiving the physical memory map or * calculating/retreiving the hash table size @@ -260,11 +247,10 @@ void __init early_setup(unsigned long dt_ptr) * Iterate all ppc_md structures until we find the proper * one for the current machine type */ - DBG("Probing machine type for platform %x...\n", - systemcfg->platform); + DBG("Probing machine type for platform %x...\n", _machine); for (mach = machines; *mach; mach++) { - if ((*mach)->probe(systemcfg->platform)) + if ((*mach)->probe(_machine)) break; } /* What can we do if we didn't find ? */ @@ -296,6 +282,28 @@ void __init early_setup(unsigned long dt_ptr) DBG(" <- early_setup()\n"); } +#ifdef CONFIG_SMP +void early_setup_secondary(void) +{ + struct paca_struct *lpaca = get_paca(); + + /* Mark enabled in PACA */ + lpaca->proc_enabled = 0; + + /* Initialize hash table for that CPU */ + htab_initialize_secondary(); + + /* Initialize STAB/SLB. We use a virtual address as it works + * in real mode on pSeries and we want a virutal address on + * iSeries anyway + */ + if (cpu_has_feature(CPU_FTR_SLB)) + slb_initialize(); + else + stab_initialize(lpaca->stab_addr); +} + +#endif /* CONFIG_SMP */ #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) void smp_release_cpus(void) @@ -321,7 +329,8 @@ void smp_release_cpus(void) #endif /* CONFIG_SMP || CONFIG_KEXEC */ /* - * Initialize some remaining members of the ppc64_caches and systemcfg structures + * Initialize some remaining members of the ppc64_caches and systemcfg + * structures * (at least until we get rid of them completely). This is mostly some * cache informations about the CPU that will be used by cache flush * routines and/or provided to userland @@ -346,7 +355,7 @@ static void __init initialize_cache_info(void) const char *dc, *ic; /* Then read cache informations */ - if (systemcfg->platform == PLATFORM_POWERMAC) { + if (_machine == PLATFORM_POWERMAC) { dc = "d-cache-block-size"; ic = "i-cache-block-size"; } else { @@ -366,9 +375,8 @@ static void __init initialize_cache_info(void) DBG("Argh, can't find dcache properties ! " "sizep: %p, lsizep: %p\n", sizep, lsizep); - systemcfg->dcache_size = ppc64_caches.dsize = size; - systemcfg->dcache_line_size = - ppc64_caches.dline_size = lsize; + ppc64_caches.dsize = size; + ppc64_caches.dline_size = lsize; ppc64_caches.log_dline_size = __ilog2(lsize); ppc64_caches.dlines_per_page = PAGE_SIZE / lsize; @@ -384,60 +392,16 @@ static void __init initialize_cache_info(void) DBG("Argh, can't find icache properties ! " "sizep: %p, lsizep: %p\n", sizep, lsizep); - systemcfg->icache_size = ppc64_caches.isize = size; - systemcfg->icache_line_size = - ppc64_caches.iline_size = lsize; + ppc64_caches.isize = size; + ppc64_caches.iline_size = lsize; ppc64_caches.log_iline_size = __ilog2(lsize); ppc64_caches.ilines_per_page = PAGE_SIZE / lsize; } } - /* Add an eye catcher and the systemcfg layout version number */ - strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64"); - systemcfg->version.major = SYSTEMCFG_MAJOR; - systemcfg->version.minor = SYSTEMCFG_MINOR; - systemcfg->processor = mfspr(SPRN_PVR); - DBG(" <- initialize_cache_info()\n"); } -static void __init check_for_initrd(void) -{ -#ifdef CONFIG_BLK_DEV_INITRD - u64 *prop; - - DBG(" -> check_for_initrd()\n"); - - if (of_chosen) { - prop = (u64 *)get_property(of_chosen, - "linux,initrd-start", NULL); - if (prop != NULL) { - initrd_start = (unsigned long)__va(*prop); - prop = (u64 *)get_property(of_chosen, - "linux,initrd-end", NULL); - if (prop != NULL) { - initrd_end = (unsigned long)__va(*prop); - initrd_below_start_ok = 1; - } else - initrd_start = 0; - } - } - - /* If we were passed an initrd, set the ROOT_DEV properly if the values - * look sensible. If not, clear initrd reference. - */ - if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && - initrd_end > initrd_start) - ROOT_DEV = Root_RAM0; - else - initrd_start = initrd_end = 0; - - if (initrd_start) - printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); - - DBG(" <- check_for_initrd()\n"); -#endif /* CONFIG_BLK_DEV_INITRD */ -} /* * Do some initial setup of the system. The parameters are those which @@ -452,6 +416,10 @@ void __init setup_system(void) */ unflatten_device_tree(); +#ifdef CONFIG_KEXEC + kexec_setup(); /* requires unflattened device tree. */ +#endif + /* * Fill the ppc64_caches & systemcfg structures with informations * retreived from the device-tree. Need to be called before @@ -521,16 +489,14 @@ void __init setup_system(void) printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); - printk("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch); - printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller); - printk("systemcfg = 0x%p\n", systemcfg); - printk("systemcfg->platform = 0x%x\n", systemcfg->platform); - printk("systemcfg->processorCount = 0x%lx\n", systemcfg->processorCount); - printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize); + printk("ppc64_interrupt_controller = 0x%ld\n", + ppc64_interrupt_controller); + printk("platform = 0x%x\n", _machine); + printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size()); printk("ppc64_caches.dcache_line_size = 0x%x\n", - ppc64_caches.dline_size); + ppc64_caches.dline_size); printk("ppc64_caches.icache_line_size = 0x%x\n", - ppc64_caches.iline_size); + ppc64_caches.iline_size); printk("htab_address = 0x%p\n", htab_address); printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); printk("-----------------------------------------------------\n"); @@ -595,33 +561,6 @@ static void __init emergency_stack_init(void) } /* - * Called from setup_arch to initialize the bitmap of available - * syscalls in the systemcfg page - */ -void __init setup_syscall_map(void) -{ - unsigned int i, count64 = 0, count32 = 0; - extern unsigned long *sys_call_table; - extern unsigned long sys_ni_syscall; - - - for (i = 0; i < __NR_syscalls; i++) { - if (sys_call_table[i*2] != sys_ni_syscall) { - count64++; - systemcfg->syscall_map_64[i >> 5] |= - 0x80000000UL >> (i & 0x1f); - } - if (sys_call_table[i*2+1] != sys_ni_syscall) { - count32++; - systemcfg->syscall_map_32[i >> 5] |= - 0x80000000UL >> (i & 0x1f); - } - } - printk(KERN_INFO "Syscall map setup, %d 32-bit and %d 64-bit syscalls\n", - count32, count64); -} - -/* * Called into from start_kernel, after lock_kernel has been called. * Initializes bootmem, which is unsed to manage page allocation until * mem_init is called. @@ -662,9 +601,6 @@ void __init setup_arch(char **cmdline_p) do_init_bootmem(); sparse_init(); - /* initialize the syscall map in systemcfg */ - setup_syscall_map(); - #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #endif @@ -902,26 +838,6 @@ int check_legacy_ioport(unsigned long base_port) } EXPORT_SYMBOL(check_legacy_ioport); -#ifdef CONFIG_XMON -static int __init early_xmon(char *p) -{ - /* ensure xmon is enabled */ - if (p) { - if (strncmp(p, "on", 2) == 0) - xmon_init(1); - if (strncmp(p, "off", 3) == 0) - xmon_init(0); - if (strncmp(p, "early", 5) != 0) - return 0; - } - xmon_init(1); - debugger(NULL); - - return 0; -} -early_param("xmon", early_xmon); -#endif - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 876c57c11365..5a2eba60dd39 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -42,11 +42,11 @@ #include <asm/uaccess.h> #include <asm/cacheflush.h> +#include <asm/sigcontext.h> +#include <asm/vdso.h> #ifdef CONFIG_PPC64 #include "ppc32.h" -#include <asm/ppcdebug.h> #include <asm/unistd.h> -#include <asm/vdso.h> #else #include <asm/ucontext.h> #include <asm/pgtable.h> @@ -403,8 +403,6 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, ELF_NFPREG * sizeof(double))) return 1; - current->thread.fpscr.val = 0; /* turn off all fp exceptions */ - #ifdef CONFIG_ALTIVEC /* save altivec registers */ if (current->thread.used_vr) { @@ -809,18 +807,18 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka, /* Save user registers on the stack */ frame = &rt_sf->uc.uc_mcontext; -#ifdef CONFIG_PPC64 if (vdso32_rt_sigtramp && current->thread.vdso_base) { if (save_user_regs(regs, frame, 0)) goto badframe; regs->link = current->thread.vdso_base + vdso32_rt_sigtramp; - } else -#endif - { + } else { if (save_user_regs(regs, frame, __NR_rt_sigreturn)) goto badframe; regs->link = (unsigned long) frame->tramp; } + + current->thread.fpscr.val = 0; /* turn off all fp exceptions */ + if (put_user(regs->gpr[1], (u32 __user *)newsp)) goto badframe; regs->gpr[1] = newsp; @@ -1090,19 +1088,18 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, || __put_user(sig, &sc->signal)) goto badframe; -#ifdef CONFIG_PPC64 if (vdso32_sigtramp && current->thread.vdso_base) { if (save_user_regs(regs, &frame->mctx, 0)) goto badframe; regs->link = current->thread.vdso_base + vdso32_sigtramp; - } else -#endif - { + } else { if (save_user_regs(regs, &frame->mctx, __NR_sigreturn)) goto badframe; regs->link = (unsigned long) frame->mctx.tramp; } + current->thread.fpscr.val = 0; /* turn off all fp exceptions */ + if (put_user(regs->gpr[1], (u32 __user *)newsp)) goto badframe; regs->gpr[1] = newsp; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index ec9d0984b6a0..1decf2785530 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -33,7 +33,6 @@ #include <asm/ucontext.h> #include <asm/uaccess.h> #include <asm/pgtable.h> -#include <asm/ppcdebug.h> #include <asm/unistd.h> #include <asm/cacheflush.h> #include <asm/vdso.h> @@ -132,9 +131,6 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, flush_fp_to_thread(current); - /* Make sure signal doesn't get spurrious FP exceptions */ - current->thread.fpscr.val = 0; - #ifdef CONFIG_ALTIVEC err |= __put_user(v_regs, &sc->v_regs); @@ -424,6 +420,9 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info, if (err) goto badframe; + /* Make sure signal handler doesn't get spurious FP exceptions */ + current->thread.fpscr.val = 0; + /* Set up to return from userspace. */ if (vdso64_rt_sigtramp && current->thread.vdso_base) { regs->link = current->thread.vdso_base + vdso64_rt_sigtramp; diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 1794a694a928..30374d2f88e5 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -40,24 +40,25 @@ #include <asm/prom.h> #include <asm/smp.h> #include <asm/time.h> -#include <asm/xmon.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/system.h> #include <asm/mpic.h> +#include <asm/vdso_datapage.h> #ifdef CONFIG_PPC64 #include <asm/paca.h> #endif -int smp_hw_index[NR_CPUS]; -struct thread_info *secondary_ti; - #ifdef DEBUG +#include <asm/udbg.h> #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) #endif +int smp_hw_index[NR_CPUS]; +struct thread_info *secondary_ti; + cpumask_t cpu_possible_map = CPU_MASK_NONE; cpumask_t cpu_online_map = CPU_MASK_NONE; cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; @@ -369,9 +370,11 @@ int generic_cpu_disable(void) if (cpu == boot_cpuid) return -EBUSY; - systemcfg->processorCount--; cpu_clear(cpu, cpu_online_map); +#ifdef CONFIG_PPC64 + vdso_data->processorCount--; fixup_irqs(cpu_online_map); +#endif return 0; } @@ -389,9 +392,11 @@ int generic_cpu_enable(unsigned int cpu) while (!cpu_online(cpu)) cpu_relax(); +#ifdef CONFIG_PPC64 fixup_irqs(cpu_online_map); /* counter the irq disable in fixup_irqs */ local_irq_enable(); +#endif return 0; } @@ -420,7 +425,9 @@ void generic_mach_cpu_die(void) while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE) cpu_relax(); +#ifdef CONFIG_PPC64 flush_tlb_pending(); +#endif cpu_set(cpu, cpu_online_map); local_irq_enable(); } @@ -511,6 +518,7 @@ int __devinit start_secondary(void *unused) smp_store_cpu_info(cpu); set_dec(tb_ticks_per_jiffy); + preempt_disable(); cpu_callin_map[cpu] = 1; smp_ops->setup_cpu(cpu); diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index a8210ed5c686..9c921d1c4084 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -52,7 +52,6 @@ #include <asm/semaphore.h> #include <asm/time.h> #include <asm/mmu_context.h> -#include <asm/systemcfg.h> #include <asm/ppc-pci.h> /* readdir & getdents */ diff --git a/arch/ppc64/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 6654b350979c..0f0c3a9ae2e5 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -16,10 +16,10 @@ #include <asm/firmware.h> #include <asm/hvcall.h> #include <asm/prom.h> -#include <asm/systemcfg.h> #include <asm/paca.h> #include <asm/lppaca.h> #include <asm/machdep.h> +#include <asm/smp.h> static DEFINE_PER_CPU(struct cpu, cpu_devices); @@ -231,7 +231,7 @@ static void register_cpu_online(unsigned int cpu) sysdev_create_file(s, &attr_pmc7); if (cur_cpu_spec->num_pmcs >= 8) sysdev_create_file(s, &attr_pmc8); - + if (cpu_has_feature(CPU_FTR_SMT)) sysdev_create_file(s, &attr_purr); } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 6996a593dcb3..070b4b458aaf 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -61,14 +61,16 @@ #include <asm/prom.h> #include <asm/irq.h> #include <asm/div64.h> +#include <asm/smp.h> +#include <asm/vdso_datapage.h> #ifdef CONFIG_PPC64 -#include <asm/systemcfg.h> #include <asm/firmware.h> #endif #ifdef CONFIG_PPC_ISERIES #include <asm/iseries/it_lp_queue.h> #include <asm/iseries/hv_call_xm.h> #endif +#include <asm/smp.h> /* keep track of when we need to update the rtc */ time_t last_rtc_update; @@ -118,10 +120,6 @@ static unsigned adjusting_time = 0; unsigned long ppc_proc_freq; unsigned long ppc_tb_freq; -#ifdef CONFIG_PPC32 /* XXX for now */ -#define boot_cpuid 0 -#endif - u64 tb_last_jiffy __cacheline_aligned_in_smp; unsigned long tb_last_stamp; @@ -263,7 +261,6 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, do_gtod.varp = temp_varp; do_gtod.var_idx = temp_idx; -#ifdef CONFIG_PPC64 /* * tb_update_count is used to allow the userspace gettimeofday code * to assure itself that it sees a consistent view of the tb_to_xs and @@ -273,14 +270,15 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, * tb_to_xs and stamp_xsec values are consistent. If not, then it * loops back and reads them again until this criteria is met. */ - ++(systemcfg->tb_update_count); + ++(vdso_data->tb_update_count); smp_wmb(); - systemcfg->tb_orig_stamp = new_tb_stamp; - systemcfg->stamp_xsec = new_stamp_xsec; - systemcfg->tb_to_xs = new_tb_to_xs; + vdso_data->tb_orig_stamp = new_tb_stamp; + vdso_data->stamp_xsec = new_stamp_xsec; + vdso_data->tb_to_xs = new_tb_to_xs; + vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec; + vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec; smp_wmb(); - ++(systemcfg->tb_update_count); -#endif + ++(vdso_data->tb_update_count); } /* @@ -359,8 +357,8 @@ static void iSeries_tb_recal(void) do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; tb_to_xs = divres.result_low; do_gtod.varp->tb_to_xs = tb_to_xs; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->tb_to_xs = tb_to_xs; + vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; + vdso_data->tb_to_xs = tb_to_xs; } else { printk( "Titan recalibrate: FAILED (difference > 4 percent)\n" @@ -485,6 +483,8 @@ void __init smp_space_timers(unsigned int max_cpus) unsigned long offset = tb_ticks_per_jiffy / max_cpus; unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid); + /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ + previous_tb -= tb_ticks_per_jiffy; for_each_cpu(i) { if (i != boot_cpuid) { previous_tb += offset; @@ -560,10 +560,8 @@ int do_settimeofday(struct timespec *tv) new_xsec += (u64)new_sec * XSEC_PER_SEC - tb_delta_xs; update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs); -#ifdef CONFIG_PPC64 - systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; - systemcfg->tz_dsttime = sys_tz.tz_dsttime; -#endif + vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; + vdso_data->tz_dsttime = sys_tz.tz_dsttime; write_sequnlock_irqrestore(&xtime_lock, flags); clock_was_set(); @@ -712,13 +710,12 @@ void __init time_init(void) do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; do_gtod.tb_to_us = tb_to_us; -#ifdef CONFIG_PPC64 - systemcfg->tb_orig_stamp = tb_last_jiffy; - systemcfg->tb_update_count = 0; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; - systemcfg->tb_to_xs = tb_to_xs; -#endif + + vdso_data->tb_orig_stamp = tb_last_jiffy; + vdso_data->tb_update_count = 0; + vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; + vdso_data->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; + vdso_data->tb_to_xs = tb_to_xs; time_freq = 0; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 07e5ee40b870..1511454c4690 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -39,7 +39,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/rtas.h> -#include <asm/xmon.h> #include <asm/pmc.h> #ifdef CONFIG_PPC32 #include <asm/reg.h> @@ -50,7 +49,6 @@ #ifdef CONFIG_PPC64 #include <asm/firmware.h> #include <asm/processor.h> -#include <asm/systemcfg.h> #endif #ifdef CONFIG_PPC64 /* XXX */ @@ -130,7 +128,7 @@ int die(const char *str, struct pt_regs *regs, long err) nl = 1; #endif #ifdef CONFIG_PPC64 - switch (systemcfg->platform) { + switch (_machine) { case PLATFORM_PSERIES: printk("PSERIES "); nl = 1; @@ -748,22 +746,12 @@ static int check_bug_trap(struct pt_regs *regs) return 0; if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ -#ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n", - bug->function, bug->file, - bug->line & ~BUG_WARNING_TRAP); -#endif /* CONFIG_XMON */ printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } -#ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", - bug->function, bug->file, bug->line); - xmon(regs); -#endif /* CONFIG_XMON */ printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); @@ -898,10 +886,6 @@ void altivec_unavailable_exception(struct pt_regs *regs) die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT); } -#ifdef CONFIG_PPC64 -extern perf_irq_t perf_irq; -#endif - #if defined(CONFIG_PPC64) || defined(CONFIG_E500) void performance_monitor_exception(struct pt_regs *regs) { diff --git a/arch/ppc64/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index d49c3613c8ec..0d878e72fc44 100644 --- a/arch/ppc64/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -10,12 +10,10 @@ */ #include <stdarg.h> -#define WANT_PPCDBG_TAB /* Only defined here */ #include <linux/config.h> #include <linux/types.h> #include <linux/sched.h> #include <linux/console.h> -#include <asm/ppcdebug.h> #include <asm/processor.h> void (*udbg_putc)(unsigned char c); @@ -89,59 +87,6 @@ void udbg_printf(const char *fmt, ...) va_end(args); } -/* PPCDBG stuff */ - -u64 ppc64_debug_switch; - -/* Special print used by PPCDBG() macro */ -void udbg_ppcdbg(unsigned long debug_flags, const char *fmt, ...) -{ - unsigned long active_debugs = debug_flags & ppc64_debug_switch; - - if (active_debugs) { - va_list ap; - unsigned char buf[UDBG_BUFSIZE]; - unsigned long i, len = 0; - - for (i=0; i < PPCDBG_NUM_FLAGS; i++) { - if (((1U << i) & active_debugs) && - trace_names[i]) { - len += strlen(trace_names[i]); - udbg_puts(trace_names[i]); - break; - } - } - - snprintf(buf, UDBG_BUFSIZE, " [%s]: ", current->comm); - len += strlen(buf); - udbg_puts(buf); - - while (len < 18) { - udbg_puts(" "); - len++; - } - - va_start(ap, fmt); - vsnprintf(buf, UDBG_BUFSIZE, fmt, ap); - udbg_puts(buf); - va_end(ap); - } -} - -unsigned long udbg_ifdebug(unsigned long flags) -{ - return (flags & ppc64_debug_switch); -} - -/* - * Initialize the PPCDBG state. Called before relocation has been enabled. - */ -void __init ppcdbg_initialize(void) -{ - ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */ - /* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */; -} - /* * Early boot console based on udbg */ diff --git a/arch/ppc64/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 9313574ab935..9313574ab935 100644 --- a/arch/ppc64/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c diff --git a/arch/ppc64/kernel/udbg_scc.c b/arch/powerpc/kernel/udbg_scc.c index 820c53551507..820c53551507 100644 --- a/arch/ppc64/kernel/udbg_scc.c +++ b/arch/powerpc/kernel/udbg_scc.c diff --git a/arch/ppc64/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 4aacf521e3e4..0d4d8bec0df4 100644 --- a/arch/ppc64/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -31,10 +31,12 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/mmu_context.h> +#include <asm/lmb.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/sections.h> #include <asm/vdso.h> +#include <asm/vdso_datapage.h> #undef DEBUG @@ -44,45 +46,54 @@ #define DBG(fmt...) #endif +/* Max supported size for symbol names */ +#define MAX_SYMNAME 64 -/* - * The vDSOs themselves are here - */ -extern char vdso64_start, vdso64_end; extern char vdso32_start, vdso32_end; - -static void *vdso64_kbase = &vdso64_start; static void *vdso32_kbase = &vdso32_start; - -unsigned int vdso64_pages; unsigned int vdso32_pages; - -/* Signal trampolines user addresses */ - -unsigned long vdso64_rt_sigtramp; unsigned long vdso32_sigtramp; unsigned long vdso32_rt_sigtramp; +#ifdef CONFIG_PPC64 +extern char vdso64_start, vdso64_end; +static void *vdso64_kbase = &vdso64_start; +unsigned int vdso64_pages; +unsigned long vdso64_rt_sigtramp; +#endif /* CONFIG_PPC64 */ + +/* + * The vdso data page (aka. systemcfg for old ppc64 fans) is here. + * Once the early boot kernel code no longer needs to muck around + * with it, it will become dynamically allocated + */ +static union { + struct vdso_data data; + u8 page[PAGE_SIZE]; +} vdso_data_store __attribute__((__section__(".data.page_aligned"))); +struct vdso_data *vdso_data = &vdso_data_store.data; + /* Format of the patch table */ struct vdso_patch_def { - u32 pvr_mask, pvr_value; + unsigned long ftr_mask, ftr_value; const char *gen_name; const char *fix_name; }; /* Table of functions to patch based on the CPU type/revision * - * TODO: Improve by adding whole lists for each entry + * Currently, we only change sync_dicache to do nothing on processors + * with a coherent icache */ static struct vdso_patch_def vdso_patches[] = { { - 0xffff0000, 0x003a0000, /* POWER5 */ + CPU_FTR_COHERENT_ICACHE, CPU_FTR_COHERENT_ICACHE, "__kernel_sync_dicache", "__kernel_sync_dicache_p5" }, { - 0xffff0000, 0x003b0000, /* POWER5 */ - "__kernel_sync_dicache", "__kernel_sync_dicache_p5" + CPU_FTR_USE_TB, 0, + "__kernel_gettimeofday", NULL }, }; @@ -116,7 +127,8 @@ static void dump_one_vdso_page(struct page *pg, struct page *upg) page_count(pg), pg->flags); if (upg/* && pg != upg*/) { - printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) << PAGE_SHIFT), + printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) + << PAGE_SHIFT), page_count(upg), upg->flags); } @@ -130,9 +142,11 @@ static void dump_vdso_pages(struct vm_area_struct * vma) if (!vma || test_thread_flag(TIF_32BIT)) { printk("vDSO32 @ %016lx:\n", (unsigned long)vdso32_kbase); for (i=0; i<vdso32_pages; i++) { - struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); + struct page *pg = virt_to_page(vdso32_kbase + + i*PAGE_SIZE); struct page *upg = (vma && vma->vm_mm) ? - follow_page(vma->vm_mm, vma->vm_start + i*PAGE_SIZE, 0) + follow_page(vma->vm_mm, vma->vm_start + + i*PAGE_SIZE, 0) : NULL; dump_one_vdso_page(pg, upg); } @@ -140,9 +154,11 @@ static void dump_vdso_pages(struct vm_area_struct * vma) if (!vma || !test_thread_flag(TIF_32BIT)) { printk("vDSO64 @ %016lx:\n", (unsigned long)vdso64_kbase); for (i=0; i<vdso64_pages; i++) { - struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); + struct page *pg = virt_to_page(vdso64_kbase + + i*PAGE_SIZE); struct page *upg = (vma && vma->vm_mm) ? - follow_page(vma->vm_mm, vma->vm_start + i*PAGE_SIZE, 0) + follow_page(vma->vm_mm, vma->vm_start + + i*PAGE_SIZE, 0) : NULL; dump_one_vdso_page(pg, upg); } @@ -167,7 +183,12 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma, { unsigned long offset = address - vma->vm_start; struct page *pg; - void *vbase = test_thread_flag(TIF_32BIT) ? vdso32_kbase : vdso64_kbase; +#ifdef CONFIG_PPC64 + void *vbase = test_thread_flag(TIF_32BIT) ? + vdso32_kbase : vdso64_kbase; +#else + void *vbase = vdso32_kbase; +#endif DBG("vdso_vma_nopage(current: %s, address: %016lx, off: %lx)\n", current->comm, address, offset); @@ -179,7 +200,7 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma, * Last page is systemcfg. */ if ((vma->vm_end - address) <= PAGE_SIZE) - pg = virt_to_page(systemcfg); + pg = virt_to_page(vdso_data); else pg = virt_to_page(vbase + offset); @@ -198,13 +219,15 @@ static struct vm_operations_struct vdso_vmops = { * This is called from binfmt_elf, we create the special vma for the * vDSO and insert it into the mm struct tree */ -int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) +int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack) { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; unsigned long vdso_pages; unsigned long vdso_base; +#ifdef CONFIG_PPC64 if (test_thread_flag(TIF_32BIT)) { vdso_pages = vdso32_pages; vdso_base = VDSO32_MBASE; @@ -212,6 +235,10 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) vdso_pages = vdso64_pages; vdso_base = VDSO64_MBASE; } +#else + vdso_pages = vdso32_pages; + vdso_base = VDSO32_MBASE; +#endif current->thread.vdso_base = 0; @@ -227,6 +254,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) memset(vma, 0, sizeof(*vma)); + /* Add a page to the vdso size for the data page */ + vdso_pages ++; + /* * pick a base address for the vDSO in process space. We try to put it * at vdso_base which is the "natural" base for it, but we might fail @@ -243,23 +273,20 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) vma->vm_mm = mm; vma->vm_start = current->thread.vdso_base; + vma->vm_end = vma->vm_start + (vdso_pages << PAGE_SHIFT); /* - * the VMA size is one page more than the vDSO since systemcfg - * is mapped in the last one + * our vma flags don't have VM_WRITE so by default, the process isn't + * allowed to write those pages. + * gdb can break that with ptrace interface, and thus trigger COW on + * those pages but it's then your responsibility to never do that on + * the "data" page of the vDSO or you'll stop getting kernel updates + * and your nice userland gettimeofday will be totally dead. + * It's fine to use that for setting breakpoints in the vDSO code + * pages though */ - vma->vm_end = vma->vm_start + ((vdso_pages + 1) << PAGE_SHIFT); - - /* - * our vma flags don't have VM_WRITE so by default, the process isn't allowed - * to write those pages. - * gdb can break that with ptrace interface, and thus trigger COW on those - * pages but it's then your responsibility to never do that on the "data" page - * of the vDSO or you'll stop getting kernel updates and your nice userland - * gettimeofday will be totally dead. It's fine to use that for setting - * breakpoints in the vDSO code pages though - */ - vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | VM_RESERVED; + vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | + VM_MAYEXEC | VM_RESERVED; vma->vm_flags |= mm->def_flags; vma->vm_page_prot = protection_map[vma->vm_flags & 0x7]; vma->vm_ops = &vdso_vmops; @@ -299,6 +326,74 @@ static void * __init find_section32(Elf32_Ehdr *ehdr, const char *secname, return NULL; } +static Elf32_Sym * __init find_symbol32(struct lib32_elfinfo *lib, + const char *symname) +{ + unsigned int i; + char name[MAX_SYMNAME], *c; + + for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) { + if (lib->dynsym[i].st_name == 0) + continue; + strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, + MAX_SYMNAME); + c = strchr(name, '@'); + if (c) + *c = 0; + if (strcmp(symname, name) == 0) + return &lib->dynsym[i]; + } + return NULL; +} + +/* Note that we assume the section is .text and the symbol is relative to + * the library base + */ +static unsigned long __init find_function32(struct lib32_elfinfo *lib, + const char *symname) +{ + Elf32_Sym *sym = find_symbol32(lib, symname); + + if (sym == NULL) { + printk(KERN_WARNING "vDSO32: function %s not found !\n", + symname); + return 0; + } + return sym->st_value - VDSO32_LBASE; +} + +static int vdso_do_func_patch32(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64, + const char *orig, const char *fix) +{ + Elf32_Sym *sym32_gen, *sym32_fix; + + sym32_gen = find_symbol32(v32, orig); + if (sym32_gen == NULL) { + printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", orig); + return -1; + } + if (fix == NULL) { + sym32_gen->st_name = 0; + return 0; + } + sym32_fix = find_symbol32(v32, fix); + if (sym32_fix == NULL) { + printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", fix); + return -1; + } + sym32_gen->st_value = sym32_fix->st_value; + sym32_gen->st_size = sym32_fix->st_size; + sym32_gen->st_info = sym32_fix->st_info; + sym32_gen->st_other = sym32_fix->st_other; + sym32_gen->st_shndx = sym32_fix->st_shndx; + + return 0; +} + + +#ifdef CONFIG_PPC64 + static void * __init find_section64(Elf64_Ehdr *ehdr, const char *secname, unsigned long *size) { @@ -323,33 +418,17 @@ static void * __init find_section64(Elf64_Ehdr *ehdr, const char *secname, return NULL; } -static Elf32_Sym * __init find_symbol32(struct lib32_elfinfo *lib, const char *symname) -{ - unsigned int i; - char name[32], *c; - - for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) { - if (lib->dynsym[i].st_name == 0) - continue; - strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, 32); - c = strchr(name, '@'); - if (c) - *c = 0; - if (strcmp(symname, name) == 0) - return &lib->dynsym[i]; - } - return NULL; -} - -static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib, const char *symname) +static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib, + const char *symname) { unsigned int i; - char name[32], *c; + char name[MAX_SYMNAME], *c; for (i = 0; i < (lib->dynsymsize / sizeof(Elf64_Sym)); i++) { if (lib->dynsym[i].st_name == 0) continue; - strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, 32); + strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, + MAX_SYMNAME); c = strchr(name, '@'); if (c) *c = 0; @@ -362,35 +441,55 @@ static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib, const char *s /* Note that we assume the section is .text and the symbol is relative to * the library base */ -static unsigned long __init find_function32(struct lib32_elfinfo *lib, const char *symname) +static unsigned long __init find_function64(struct lib64_elfinfo *lib, + const char *symname) { - Elf32_Sym *sym = find_symbol32(lib, symname); + Elf64_Sym *sym = find_symbol64(lib, symname); if (sym == NULL) { - printk(KERN_WARNING "vDSO32: function %s not found !\n", symname); + printk(KERN_WARNING "vDSO64: function %s not found !\n", + symname); return 0; } - return sym->st_value - VDSO32_LBASE; +#ifdef VDS64_HAS_DESCRIPTORS + return *((u64 *)(vdso64_kbase + sym->st_value - VDSO64_LBASE)) - + VDSO64_LBASE; +#else + return sym->st_value - VDSO64_LBASE; +#endif } -/* Note that we assume the section is .text and the symbol is relative to - * the library base - */ -static unsigned long __init find_function64(struct lib64_elfinfo *lib, const char *symname) +static int vdso_do_func_patch64(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64, + const char *orig, const char *fix) { - Elf64_Sym *sym = find_symbol64(lib, symname); + Elf64_Sym *sym64_gen, *sym64_fix; - if (sym == NULL) { - printk(KERN_WARNING "vDSO64: function %s not found !\n", symname); + sym64_gen = find_symbol64(v64, orig); + if (sym64_gen == NULL) { + printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", orig); + return -1; + } + if (fix == NULL) { + sym64_gen->st_name = 0; return 0; } -#ifdef VDS64_HAS_DESCRIPTORS - return *((u64 *)(vdso64_kbase + sym->st_value - VDSO64_LBASE)) - VDSO64_LBASE; -#else - return sym->st_value - VDSO64_LBASE; -#endif + sym64_fix = find_symbol64(v64, fix); + if (sym64_fix == NULL) { + printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", fix); + return -1; + } + sym64_gen->st_value = sym64_fix->st_value; + sym64_gen->st_size = sym64_fix->st_size; + sym64_gen->st_info = sym64_fix->st_info; + sym64_gen->st_other = sym64_fix->st_other; + sym64_gen->st_shndx = sym64_fix->st_shndx; + + return 0; } +#endif /* CONFIG_PPC64 */ + static __init int vdso_do_find_sections(struct lib32_elfinfo *v32, struct lib64_elfinfo *v64) @@ -404,7 +503,7 @@ static __init int vdso_do_find_sections(struct lib32_elfinfo *v32, v32->dynsym = find_section32(v32->hdr, ".dynsym", &v32->dynsymsize); v32->dynstr = find_section32(v32->hdr, ".dynstr", NULL); if (v32->dynsym == NULL || v32->dynstr == NULL) { - printk(KERN_ERR "vDSO32: a required symbol section was not found\n"); + printk(KERN_ERR "vDSO32: required symbol section not found\n"); return -1; } sect = find_section32(v32->hdr, ".text", NULL); @@ -414,10 +513,11 @@ static __init int vdso_do_find_sections(struct lib32_elfinfo *v32, } v32->text = sect - vdso32_kbase; +#ifdef CONFIG_PPC64 v64->dynsym = find_section64(v64->hdr, ".dynsym", &v64->dynsymsize); v64->dynstr = find_section64(v64->hdr, ".dynstr", NULL); if (v64->dynsym == NULL || v64->dynstr == NULL) { - printk(KERN_ERR "vDSO64: a required symbol section was not found\n"); + printk(KERN_ERR "vDSO64: required symbol section not found\n"); return -1; } sect = find_section64(v64->hdr, ".text", NULL); @@ -426,6 +526,7 @@ static __init int vdso_do_find_sections(struct lib32_elfinfo *v32, return -1; } v64->text = sect - vdso64_kbase; +#endif /* CONFIG_PPC64 */ return 0; } @@ -437,82 +538,40 @@ static __init void vdso_setup_trampolines(struct lib32_elfinfo *v32, * Find signal trampolines */ - vdso64_rt_sigtramp = find_function64(v64, "__kernel_sigtramp_rt64"); - vdso32_sigtramp = find_function32(v32, "__kernel_sigtramp32"); - vdso32_rt_sigtramp = find_function32(v32, "__kernel_sigtramp_rt32"); +#ifdef CONFIG_PPC64 + vdso64_rt_sigtramp = find_function64(v64, "__kernel_sigtramp_rt64"); +#endif + vdso32_sigtramp = find_function32(v32, "__kernel_sigtramp32"); + vdso32_rt_sigtramp = find_function32(v32, "__kernel_sigtramp_rt32"); } static __init int vdso_fixup_datapage(struct lib32_elfinfo *v32, struct lib64_elfinfo *v64) { Elf32_Sym *sym32; +#ifdef CONFIG_PPC64 Elf64_Sym *sym64; - sym32 = find_symbol32(v32, "__kernel_datapage_offset"); - if (sym32 == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol __kernel_datapage_offset !\n"); - return -1; - } - *((int *)(vdso32_kbase + (sym32->st_value - VDSO32_LBASE))) = - (vdso32_pages << PAGE_SHIFT) - (sym32->st_value - VDSO32_LBASE); - sym64 = find_symbol64(v64, "__kernel_datapage_offset"); if (sym64 == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol __kernel_datapage_offset !\n"); + printk(KERN_ERR "vDSO64: Can't find symbol " + "__kernel_datapage_offset !\n"); return -1; } *((int *)(vdso64_kbase + sym64->st_value - VDSO64_LBASE)) = - (vdso64_pages << PAGE_SHIFT) - (sym64->st_value - VDSO64_LBASE); - - return 0; -} - -static int vdso_do_func_patch32(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64, - const char *orig, const char *fix) -{ - Elf32_Sym *sym32_gen, *sym32_fix; - - sym32_gen = find_symbol32(v32, orig); - if (sym32_gen == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", orig); - return -1; - } - sym32_fix = find_symbol32(v32, fix); - if (sym32_fix == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", fix); - return -1; - } - sym32_gen->st_value = sym32_fix->st_value; - sym32_gen->st_size = sym32_fix->st_size; - sym32_gen->st_info = sym32_fix->st_info; - sym32_gen->st_other = sym32_fix->st_other; - sym32_gen->st_shndx = sym32_fix->st_shndx; + (vdso64_pages << PAGE_SHIFT) - + (sym64->st_value - VDSO64_LBASE); +#endif /* CONFIG_PPC64 */ - return 0; -} - -static int vdso_do_func_patch64(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64, - const char *orig, const char *fix) -{ - Elf64_Sym *sym64_gen, *sym64_fix; - - sym64_gen = find_symbol64(v64, orig); - if (sym64_gen == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", orig); - return -1; - } - sym64_fix = find_symbol64(v64, fix); - if (sym64_fix == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", fix); + sym32 = find_symbol32(v32, "__kernel_datapage_offset"); + if (sym32 == NULL) { + printk(KERN_ERR "vDSO32: Can't find symbol " + "__kernel_datapage_offset !\n"); return -1; } - sym64_gen->st_value = sym64_fix->st_value; - sym64_gen->st_size = sym64_fix->st_size; - sym64_gen->st_info = sym64_fix->st_info; - sym64_gen->st_other = sym64_fix->st_other; - sym64_gen->st_shndx = sym64_fix->st_shndx; + *((int *)(vdso32_kbase + (sym32->st_value - VDSO32_LBASE))) = + (vdso32_pages << PAGE_SHIFT) - + (sym32->st_value - VDSO32_LBASE); return 0; } @@ -520,29 +579,30 @@ static int vdso_do_func_patch64(struct lib32_elfinfo *v32, static __init int vdso_fixup_alt_funcs(struct lib32_elfinfo *v32, struct lib64_elfinfo *v64) { - u32 pvr; int i; - pvr = mfspr(SPRN_PVR); for (i = 0; i < ARRAY_SIZE(vdso_patches); i++) { struct vdso_patch_def *patch = &vdso_patches[i]; - int match = (pvr & patch->pvr_mask) == patch->pvr_value; - - DBG("patch %d (mask: %x, pvr: %x) : %s\n", - i, patch->pvr_mask, patch->pvr_value, match ? "match" : "skip"); - + int match = (cur_cpu_spec->cpu_features & patch->ftr_mask) + == patch->ftr_value; if (!match) continue; - DBG("replacing %s with %s...\n", patch->gen_name, patch->fix_name); + DBG("replacing %s with %s...\n", patch->gen_name, + patch->fix_name ? "NONE" : patch->fix_name); /* - * Patch the 32 bits and 64 bits symbols. Note that we do not patch - * the "." symbol on 64 bits. It would be easy to do, but doesn't - * seem to be necessary, patching the OPD symbol is enough. + * Patch the 32 bits and 64 bits symbols. Note that we do not + * patch the "." symbol on 64 bits. + * It would be easy to do, but doesn't seem to be necessary, + * patching the OPD symbol is enough. */ - vdso_do_func_patch32(v32, v64, patch->gen_name, patch->fix_name); - vdso_do_func_patch64(v32, v64, patch->gen_name, patch->fix_name); + vdso_do_func_patch32(v32, v64, patch->gen_name, + patch->fix_name); +#ifdef CONFIG_PPC64 + vdso_do_func_patch64(v32, v64, patch->gen_name, + patch->fix_name); +#endif /* CONFIG_PPC64 */ } return 0; @@ -555,8 +615,9 @@ static __init int vdso_setup(void) struct lib64_elfinfo v64; v32.hdr = vdso32_kbase; +#ifdef CONFIG_PPC64 v64.hdr = vdso64_kbase; - +#endif if (vdso_do_find_sections(&v32, &v64)) return -1; @@ -571,40 +632,101 @@ static __init int vdso_setup(void) return 0; } +/* + * Called from setup_arch to initialize the bitmap of available + * syscalls in the systemcfg page + */ +static void __init vdso_setup_syscall_map(void) +{ + unsigned int i; + extern unsigned long *sys_call_table; + extern unsigned long sys_ni_syscall; + + + for (i = 0; i < __NR_syscalls; i++) { +#ifdef CONFIG_PPC64 + if (sys_call_table[i*2] != sys_ni_syscall) + vdso_data->syscall_map_64[i >> 5] |= + 0x80000000UL >> (i & 0x1f); + if (sys_call_table[i*2+1] != sys_ni_syscall) + vdso_data->syscall_map_32[i >> 5] |= + 0x80000000UL >> (i & 0x1f); +#else /* CONFIG_PPC64 */ + if (sys_call_table[i] != sys_ni_syscall) + vdso_data->syscall_map_32[i >> 5] |= + 0x80000000UL >> (i & 0x1f); +#endif /* CONFIG_PPC64 */ + } +} + + void __init vdso_init(void) { int i; +#ifdef CONFIG_PPC64 + /* + * Fill up the "systemcfg" stuff for backward compatiblity + */ + strcpy(vdso_data->eye_catcher, "SYSTEMCFG:PPC64"); + vdso_data->version.major = SYSTEMCFG_MAJOR; + vdso_data->version.minor = SYSTEMCFG_MINOR; + vdso_data->processor = mfspr(SPRN_PVR); + vdso_data->platform = _machine; + vdso_data->physicalMemorySize = lmb_phys_mem_size(); + vdso_data->dcache_size = ppc64_caches.dsize; + vdso_data->dcache_line_size = ppc64_caches.dline_size; + vdso_data->icache_size = ppc64_caches.isize; + vdso_data->icache_line_size = ppc64_caches.iline_size; + + /* + * Calculate the size of the 64 bits vDSO + */ vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT; + DBG("vdso64_kbase: %p, 0x%x pages\n", vdso64_kbase, vdso64_pages); +#endif /* CONFIG_PPC64 */ + + + /* + * Calculate the size of the 32 bits vDSO + */ vdso32_pages = (&vdso32_end - &vdso32_start) >> PAGE_SHIFT; + DBG("vdso32_kbase: %p, 0x%x pages\n", vdso32_kbase, vdso32_pages); - DBG("vdso64_kbase: %p, 0x%x pages, vdso32_kbase: %p, 0x%x pages\n", - vdso64_kbase, vdso64_pages, vdso32_kbase, vdso32_pages); /* + * Setup the syscall map in the vDOS + */ + vdso_setup_syscall_map(); + /* * Initialize the vDSO images in memory, that is do necessary * fixups of vDSO symbols, locate trampolines, etc... */ if (vdso_setup()) { printk(KERN_ERR "vDSO setup failure, not enabled !\n"); - /* XXX should free pages here ? */ - vdso64_pages = vdso32_pages = 0; + vdso32_pages = 0; +#ifdef CONFIG_PPC64 + vdso64_pages = 0; +#endif return; } /* Make sure pages are in the correct state */ - for (i = 0; i < vdso64_pages; i++) { - struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); + for (i = 0; i < vdso32_pages; i++) { + struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); ClearPageReserved(pg); get_page(pg); + } - for (i = 0; i < vdso32_pages; i++) { - struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); +#ifdef CONFIG_PPC64 + for (i = 0; i < vdso64_pages; i++) { + struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); ClearPageReserved(pg); get_page(pg); } +#endif /* CONFIG_PPC64 */ - get_page(virt_to_page(systemcfg)); + get_page(virt_to_page(vdso_data)); } int in_gate_area_no_task(unsigned long addr) diff --git a/arch/ppc64/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index 0b1b0df973eb..8a3bed5f143a 100644 --- a/arch/ppc64/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -5,6 +5,10 @@ obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o # Build rules +ifeq ($(CONFIG_PPC32),y) +CROSS32CC := $(CC) +endif + targets := $(obj-vdso32) vdso32.so obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) @@ -15,7 +19,7 @@ EXTRA_AFLAGS := -D__VDSO32__ -s obj-y += vdso32_wrapper.o extra-y += vdso32.lds -CPPFLAGS_vdso32.lds += -P -C -U$(ARCH) +CPPFLAGS_vdso32.lds += -P -C -Upowerpc # Force dependency (incbin is bad) $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so diff --git a/arch/ppc64/kernel/vdso32/cacheflush.S b/arch/powerpc/kernel/vdso32/cacheflush.S index c8db993574ee..09629aea3e47 100644 --- a/arch/ppc64/kernel/vdso32/cacheflush.S +++ b/arch/powerpc/kernel/vdso32/cacheflush.S @@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ srwi. r8,r8,7 /* compute line count */ + crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 mr r3,r6 @@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache) */ V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) .cfi_startproc + crclr cr0*4+so sync isync li r3,0 diff --git a/arch/ppc64/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index 4f4eb0be3992..4709f1d9542c 100644 --- a/arch/ppc64/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -54,7 +54,6 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) .cfi_startproc mflr r12 .cfi_register lr,r12 - mr r4,r3 bl __get_datapage@local mtlr r12 @@ -63,6 +62,25 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) beqlr li r0,__NR_syscalls stw r0,0(r4) + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_syscall_map) + +/* + * void unsigned long long __kernel_get_tbfreq(void); + * + * returns the timebase frequency in HZ + */ +V_FUNCTION_BEGIN(__kernel_get_tbfreq) + .cfi_startproc + mflr r12 + .cfi_register lr,r12 + bl __get_datapage@local + lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3) + lwz r3,CFG_TB_TICKS_PER_SEC(r3) + mtlr r12 + crclr cr0*4+so + blr + .cfi_endproc +V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S new file mode 100644 index 000000000000..7eebff03a041 --- /dev/null +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -0,0 +1,323 @@ +/* + * Userland implementation of gettimeofday() for 32 bits processes in a + * ppc64 kernel for use in the vDSO + * + * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org, + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/ppc_asm.h> +#include <asm/vdso.h> +#include <asm/asm-offsets.h> +#include <asm/unistd.h> + + .text +/* + * Exact prototype of gettimeofday + * + * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); + * + */ +V_FUNCTION_BEGIN(__kernel_gettimeofday) + .cfi_startproc + mflr r12 + .cfi_register lr,r12 + + mr r10,r3 /* r10 saves tv */ + mr r11,r4 /* r11 saves tz */ + bl __get_datapage@local /* get data page */ + mr r9, r3 /* datapage ptr in r9 */ + bl __do_get_xsec@local /* get xsec from tb & kernel */ + bne- 2f /* out of line -> do syscall */ + + /* seconds are xsec >> 20 */ + rlwinm r5,r4,12,20,31 + rlwimi r5,r3,12,0,19 + stw r5,TVAL32_TV_SEC(r10) + + /* get remaining xsec and convert to usec. we scale + * up remaining xsec by 12 bits and get the top 32 bits + * of the multiplication + */ + rlwinm r5,r4,12,0,19 + lis r6,1000000@h + ori r6,r6,1000000@l + mulhwu r5,r5,r6 + stw r5,TVAL32_TV_USEC(r10) + + cmpli cr0,r11,0 /* check if tz is NULL */ + beq 1f + lwz r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */ + lwz r5,CFG_TZ_DSTTIME(r9) + stw r4,TZONE_TZ_MINWEST(r11) + stw r5,TZONE_TZ_DSTTIME(r11) + +1: mtlr r12 + crclr cr0*4+so + li r3,0 + blr + +2: + mtlr r12 + mr r3,r10 + mr r4,r11 + li r0,__NR_gettimeofday + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_gettimeofday) + +/* + * Exact prototype of clock_gettime() + * + * int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp); + * + */ +V_FUNCTION_BEGIN(__kernel_clock_gettime) + .cfi_startproc + /* Check for supported clock IDs */ + cmpli cr0,r3,CLOCK_REALTIME + cmpli cr1,r3,CLOCK_MONOTONIC + cror cr0*4+eq,cr0*4+eq,cr1*4+eq + bne cr0,99f + + mflr r12 /* r12 saves lr */ + .cfi_register lr,r12 + mr r10,r3 /* r10 saves id */ + mr r11,r4 /* r11 saves tp */ + bl __get_datapage@local /* get data page */ + mr r9,r3 /* datapage ptr in r9 */ + beq cr1,50f /* if monotonic -> jump there */ + + /* + * CLOCK_REALTIME + */ + + bl __do_get_xsec@local /* get xsec from tb & kernel */ + bne- 98f /* out of line -> do syscall */ + + /* seconds are xsec >> 20 */ + rlwinm r5,r4,12,20,31 + rlwimi r5,r3,12,0,19 + stw r5,TSPC32_TV_SEC(r11) + + /* get remaining xsec and convert to nsec. we scale + * up remaining xsec by 12 bits and get the top 32 bits + * of the multiplication, then we multiply by 1000 + */ + rlwinm r5,r4,12,0,19 + lis r6,1000000@h + ori r6,r6,1000000@l + mulhwu r5,r5,r6 + mulli r5,r5,1000 + stw r5,TSPC32_TV_NSEC(r11) + mtlr r12 + crclr cr0*4+so + li r3,0 + blr + + /* + * CLOCK_MONOTONIC + */ + +50: bl __do_get_xsec@local /* get xsec from tb & kernel */ + bne- 98f /* out of line -> do syscall */ + + /* seconds are xsec >> 20 */ + rlwinm r6,r4,12,20,31 + rlwimi r6,r3,12,0,19 + + /* get remaining xsec and convert to nsec. we scale + * up remaining xsec by 12 bits and get the top 32 bits + * of the multiplication, then we multiply by 1000 + */ + rlwinm r7,r4,12,0,19 + lis r5,1000000@h + ori r5,r5,1000000@l + mulhwu r7,r7,r5 + mulli r7,r7,1000 + + /* now we must fixup using wall to monotonic. We need to snapshot + * that value and do the counter trick again. Fortunately, we still + * have the counter value in r8 that was returned by __do_get_xsec. + * At this point, r6,r7 contain our sec/nsec values, r3,r4 and r5 + * can be used + */ + + lwz r3,WTOM_CLOCK_SEC(r9) + lwz r4,WTOM_CLOCK_NSEC(r9) + + /* We now have our result in r3,r4. We create a fake dependency + * on that result and re-check the counter + */ + or r5,r4,r3 + xor r0,r5,r5 + add r9,r9,r0 +#ifdef CONFIG_PPC64 + lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9) +#else + lwz r0,(CFG_TB_UPDATE_COUNT)(r9) +#endif + cmpl cr0,r8,r0 /* check if updated */ + bne- 50b + + /* Calculate and store result. Note that this mimmics the C code, + * which may cause funny results if nsec goes negative... is that + * possible at all ? + */ + add r3,r3,r6 + add r4,r4,r7 + lis r5,NSEC_PER_SEC@h + ori r5,r5,NSEC_PER_SEC@l + cmpl cr0,r4,r5 + cmpli cr1,r4,0 + blt 1f + subf r4,r5,r4 + addi r3,r3,1 +1: bge cr1,1f + addi r3,r3,-1 + add r4,r4,r5 +1: stw r3,TSPC32_TV_SEC(r11) + stw r4,TSPC32_TV_NSEC(r11) + + mtlr r12 + crclr cr0*4+so + li r3,0 + blr + + /* + * syscall fallback + */ +98: + mtlr r12 + mr r3,r10 + mr r4,r11 +99: + li r0,__NR_clock_gettime + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_clock_gettime) + + +/* + * Exact prototype of clock_getres() + * + * int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); + * + */ +V_FUNCTION_BEGIN(__kernel_clock_getres) + .cfi_startproc + /* Check for supported clock IDs */ + cmpwi cr0,r3,CLOCK_REALTIME + cmpwi cr1,r3,CLOCK_MONOTONIC + cror cr0*4+eq,cr0*4+eq,cr1*4+eq + bne cr0,99f + + li r3,0 + cmpli cr0,r4,0 + crclr cr0*4+so + beqlr + lis r5,CLOCK_REALTIME_RES@h + ori r5,r5,CLOCK_REALTIME_RES@l + stw r3,TSPC32_TV_SEC(r4) + stw r5,TSPC32_TV_NSEC(r4) + blr + + /* + * syscall fallback + */ +99: + li r0,__NR_clock_getres + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_clock_getres) + + +/* + * This is the core of gettimeofday() & friends, it returns the xsec + * value in r3 & r4 and expects the datapage ptr (non clobbered) + * in r9. clobbers r0,r4,r5,r6,r7,r8. + * When returning, r8 contains the counter value that can be reused + * by the monotonic clock implementation + */ +__do_get_xsec: + .cfi_startproc + /* Check for update count & load values. We use the low + * order 32 bits of the update count + */ +#ifdef CONFIG_PPC64 +1: lwz r8,(CFG_TB_UPDATE_COUNT+4)(r9) +#else +1: lwz r8,(CFG_TB_UPDATE_COUNT)(r9) +#endif + andi. r0,r8,1 /* pending update ? loop */ + bne- 1b + xor r0,r8,r8 /* create dependency */ + add r9,r9,r0 + + /* Load orig stamp (offset to TB) */ + lwz r5,CFG_TB_ORIG_STAMP(r9) + lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) + + /* Get a stable TB value */ +2: mftbu r3 + mftbl r4 + mftbu r0 + cmpl cr0,r3,r0 + bne- 2b + + /* Substract tb orig stamp. If the high part is non-zero, we jump to + * the slow path which call the syscall. + * If it's ok, then we have our 32 bits tb_ticks value in r7 + */ + subfc r7,r6,r4 + subfe. r0,r5,r3 + bne- 3f + + /* Load scale factor & do multiplication */ + lwz r5,CFG_TB_TO_XS(r9) /* load values */ + lwz r6,(CFG_TB_TO_XS+4)(r9) + mulhwu r4,r7,r5 + mulhwu r6,r7,r6 + mullw r0,r7,r5 + addc r6,r6,r0 + + /* At this point, we have the scaled xsec value in r4 + XER:CA + * we load & add the stamp since epoch + */ + lwz r5,CFG_STAMP_XSEC(r9) + lwz r6,(CFG_STAMP_XSEC+4)(r9) + adde r4,r4,r6 + addze r3,r5 + + /* We now have our result in r3,r4. We create a fake dependency + * on that result and re-check the counter + */ + or r6,r4,r3 + xor r0,r6,r6 + add r9,r9,r0 +#ifdef CONFIG_PPC64 + lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9) +#else + lwz r0,(CFG_TB_UPDATE_COUNT)(r9) +#endif + cmpl cr0,r8,r0 /* check if updated */ + bne- 1b + + /* Warning ! The caller expects CR:EQ to be set to indicate a + * successful calculation (so it won't fallback to the syscall + * method). We have overriden that CR bit in the counter check, + * but fortunately, the loop exit condition _is_ CR:EQ set, so + * we can exit safely here. If you change this code, be careful + * of that side effect. + */ +3: blr + .cfi_endproc diff --git a/arch/ppc64/kernel/vdso32/note.S b/arch/powerpc/kernel/vdso32/note.S index d4b5be4f3d5f..d4b5be4f3d5f 100644 --- a/arch/ppc64/kernel/vdso32/note.S +++ b/arch/powerpc/kernel/vdso32/note.S diff --git a/arch/ppc64/kernel/vdso32/sigtramp.S b/arch/powerpc/kernel/vdso32/sigtramp.S index e04642781917..e04642781917 100644 --- a/arch/ppc64/kernel/vdso32/sigtramp.S +++ b/arch/powerpc/kernel/vdso32/sigtramp.S diff --git a/arch/ppc64/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index 6f87a916a394..f4bad720cb0a 100644 --- a/arch/ppc64/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -102,9 +102,12 @@ VERSION { VDSO_VERSION_STRING { global: - __kernel_datapage_offset; /* Has to be there for the kernel to find it */ + __kernel_datapage_offset; /* Has to be there for the kernel to find */ __kernel_get_syscall_map; __kernel_gettimeofday; + __kernel_clock_gettime; + __kernel_clock_getres; + __kernel_get_tbfreq; __kernel_sync_dicache; __kernel_sync_dicache_p5; __kernel_sigtramp32; diff --git a/arch/ppc64/kernel/vdso32/vdso32_wrapper.S b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S index 76ca28e09d29..556f0caa5d84 100644 --- a/arch/ppc64/kernel/vdso32/vdso32_wrapper.S +++ b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S @@ -6,7 +6,7 @@ .globl vdso32_start, vdso32_end .balign PAGE_SIZE vdso32_start: - .incbin "arch/ppc64/kernel/vdso32/vdso32.so" + .incbin "arch/powerpc/kernel/vdso32/vdso32.so" .balign PAGE_SIZE vdso32_end: diff --git a/arch/ppc64/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index ab39988452cc..ab39988452cc 100644 --- a/arch/ppc64/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile diff --git a/arch/ppc64/kernel/vdso64/cacheflush.S b/arch/powerpc/kernel/vdso64/cacheflush.S index d4a0ad28d534..cb4ae0a5edd0 100644 --- a/arch/ppc64/kernel/vdso64/cacheflush.S +++ b/arch/powerpc/kernel/vdso64/cacheflush.S @@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ srwi. r8,r8,7 /* compute line count */ + crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 mr r3,r6 @@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache) */ V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) .cfi_startproc + crclr cr0*4+so sync isync li r3,0 diff --git a/arch/ppc64/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index ed6e599ae824..3b2dd7d0c1eb 100644 --- a/arch/ppc64/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -54,15 +54,33 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) .cfi_startproc mflr r12 .cfi_register lr,r12 - mr r4,r3 bl V_LOCAL_FUNC(__get_datapage) mtlr r12 addi r3,r3,CFG_SYSCALL_MAP64 cmpli cr0,r4,0 + crclr cr0*4+so beqlr li r0,__NR_syscalls stw r0,0(r4) blr .cfi_endproc V_FUNCTION_END(__kernel_get_syscall_map) + + +/* + * void unsigned long __kernel_get_tbfreq(void); + * + * returns the timebase frequency in HZ + */ +V_FUNCTION_BEGIN(__kernel_get_tbfreq) + .cfi_startproc + mflr r12 + .cfi_register lr,r12 + bl V_LOCAL_FUNC(__get_datapage) + ld r3,CFG_TB_TICKS_PER_SEC(r3) + mtlr r12 + crclr cr0*4+so + blr + .cfi_endproc +V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S new file mode 100644 index 000000000000..ccaeda5136d1 --- /dev/null +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -0,0 +1,253 @@ + + /* + * Userland implementation of gettimeofday() for 64 bits processes in a + * ppc64 kernel for use in the vDSO + * + * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/ppc_asm.h> +#include <asm/vdso.h> +#include <asm/asm-offsets.h> +#include <asm/unistd.h> + + .text +/* + * Exact prototype of gettimeofday + * + * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); + * + */ +V_FUNCTION_BEGIN(__kernel_gettimeofday) + .cfi_startproc + mflr r12 + .cfi_register lr,r12 + + mr r11,r3 /* r11 holds tv */ + mr r10,r4 /* r10 holds tz */ + bl V_LOCAL_FUNC(__get_datapage) /* get data page */ + bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 + rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ + rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ + std r5,TVAL64_TV_SEC(r11) /* store sec in tv */ + subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / + * XSEC_PER_SEC + */ + rldicl r0,r0,44,20 + cmpldi cr0,r10,0 /* check if tz is NULL */ + std r0,TVAL64_TV_USEC(r11) /* store usec in tv */ + beq 1f + lwz r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */ + lwz r5,CFG_TZ_DSTTIME(r3) + stw r4,TZONE_TZ_MINWEST(r10) + stw r5,TZONE_TZ_DSTTIME(r10) +1: mtlr r12 + crclr cr0*4+so + li r3,0 /* always success */ + blr + .cfi_endproc +V_FUNCTION_END(__kernel_gettimeofday) + + +/* + * Exact prototype of clock_gettime() + * + * int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp); + * + */ +V_FUNCTION_BEGIN(__kernel_clock_gettime) + .cfi_startproc + /* Check for supported clock IDs */ + cmpwi cr0,r3,CLOCK_REALTIME + cmpwi cr1,r3,CLOCK_MONOTONIC + cror cr0*4+eq,cr0*4+eq,cr1*4+eq + bne cr0,99f + + mflr r12 /* r12 saves lr */ + .cfi_register lr,r12 + mr r10,r3 /* r10 saves id */ + mr r11,r4 /* r11 saves tp */ + bl V_LOCAL_FUNC(__get_datapage) /* get data page */ + beq cr1,50f /* if monotonic -> jump there */ + + /* + * CLOCK_REALTIME + */ + + bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ + + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 + rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ + rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ + std r5,TSPC64_TV_SEC(r11) /* store sec in tv */ + subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / + * XSEC_PER_SEC + */ + rldicl r0,r0,44,20 + mulli r0,r0,1000 /* nsec = usec * 1000 */ + std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */ + + mtlr r12 + crclr cr0*4+so + li r3,0 + blr + + /* + * CLOCK_MONOTONIC + */ + +50: bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ + + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 + rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ + rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ + subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / + * XSEC_PER_SEC + */ + rldicl r6,r0,44,20 + mulli r6,r6,1000 /* nsec = usec * 1000 */ + + /* now we must fixup using wall to monotonic. We need to snapshot + * that value and do the counter trick again. Fortunately, we still + * have the counter value in r8 that was returned by __do_get_xsec. + * At this point, r5,r6 contain our sec/nsec values. + * can be used + */ + + lwa r4,WTOM_CLOCK_SEC(r3) + lwa r7,WTOM_CLOCK_NSEC(r3) + + /* We now have our result in r4,r7. We create a fake dependency + * on that result and re-check the counter + */ + or r9,r4,r7 + xor r0,r9,r9 + add r3,r3,r0 + ld r0,CFG_TB_UPDATE_COUNT(r3) + cmpld cr0,r0,r8 /* check if updated */ + bne- 50b + + /* Calculate and store result. Note that this mimmics the C code, + * which may cause funny results if nsec goes negative... is that + * possible at all ? + */ + add r4,r4,r5 + add r7,r7,r6 + lis r9,NSEC_PER_SEC@h + ori r9,r9,NSEC_PER_SEC@l + cmpl cr0,r7,r9 + cmpli cr1,r7,0 + blt 1f + subf r7,r9,r7 + addi r4,r4,1 +1: bge cr1,1f + addi r4,r4,-1 + add r7,r7,r9 +1: std r4,TSPC64_TV_SEC(r11) + std r7,TSPC64_TV_NSEC(r11) + + mtlr r12 + crclr cr0*4+so + li r3,0 + blr + + /* + * syscall fallback + */ +98: + mtlr r12 + mr r3,r10 + mr r4,r11 +99: + li r0,__NR_clock_gettime + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_clock_gettime) + + +/* + * Exact prototype of clock_getres() + * + * int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); + * + */ +V_FUNCTION_BEGIN(__kernel_clock_getres) + .cfi_startproc + /* Check for supported clock IDs */ + cmpwi cr0,r3,CLOCK_REALTIME + cmpwi cr1,r3,CLOCK_MONOTONIC + cror cr0*4+eq,cr0*4+eq,cr1*4+eq + bne cr0,99f + + li r3,0 + cmpli cr0,r4,0 + crclr cr0*4+so + beqlr + lis r5,CLOCK_REALTIME_RES@h + ori r5,r5,CLOCK_REALTIME_RES@l + std r3,TSPC64_TV_SEC(r4) + std r5,TSPC64_TV_NSEC(r4) + blr + + /* + * syscall fallback + */ +99: + li r0,__NR_clock_getres + sc + blr + .cfi_endproc +V_FUNCTION_END(__kernel_clock_getres) + + +/* + * This is the core of gettimeofday(), it returns the xsec + * value in r4 and expects the datapage ptr (non clobbered) + * in r3. clobbers r0,r4,r5,r6,r7,r8 + * When returning, r8 contains the counter value that can be reused + */ +V_FUNCTION_BEGIN(__do_get_xsec) + .cfi_startproc + /* check for update count & load values */ +1: ld r8,CFG_TB_UPDATE_COUNT(r3) + andi. r0,r4,1 /* pending update ? loop */ + bne- 1b + xor r0,r4,r4 /* create dependency */ + add r3,r3,r0 + + /* Get TB & offset it */ + mftb r7 + ld r9,CFG_TB_ORIG_STAMP(r3) + subf r7,r9,r7 + + /* Scale result */ + ld r5,CFG_TB_TO_XS(r3) + mulhdu r7,r7,r5 + + /* Add stamp since epoch */ + ld r6,CFG_STAMP_XSEC(r3) + add r4,r6,r7 + + xor r0,r4,r4 + add r3,r3,r0 + ld r0,CFG_TB_UPDATE_COUNT(r3) + cmpld cr0,r0,r8 /* check if updated */ + bne- 1b + blr + .cfi_endproc +V_FUNCTION_END(__do_get_xsec) diff --git a/arch/ppc64/kernel/vdso64/note.S b/arch/powerpc/kernel/vdso64/note.S index dc2a509f7e8a..dc2a509f7e8a 100644 --- a/arch/ppc64/kernel/vdso64/note.S +++ b/arch/powerpc/kernel/vdso64/note.S diff --git a/arch/ppc64/kernel/vdso64/sigtramp.S b/arch/powerpc/kernel/vdso64/sigtramp.S index 31b604ab56de..31b604ab56de 100644 --- a/arch/ppc64/kernel/vdso64/sigtramp.S +++ b/arch/powerpc/kernel/vdso64/sigtramp.S diff --git a/arch/ppc64/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S index 9cb28181da80..4bdf224464ab 100644 --- a/arch/ppc64/kernel/vdso64/vdso64.lds.S +++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S @@ -102,9 +102,12 @@ VERSION { VDSO_VERSION_STRING { global: - __kernel_datapage_offset; /* Has to be there for the kernel to find it */ + __kernel_datapage_offset; /* Has to be there for the kernel to find */ __kernel_get_syscall_map; __kernel_gettimeofday; + __kernel_clock_gettime; + __kernel_clock_getres; + __kernel_get_tbfreq; __kernel_sync_dicache; __kernel_sync_dicache_p5; __kernel_sigtramp_rt64; diff --git a/arch/ppc64/kernel/vdso64/vdso64_wrapper.S b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S index 771c2741c492..0529cb9e3b97 100644 --- a/arch/ppc64/kernel/vdso64/vdso64_wrapper.S +++ b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S @@ -6,7 +6,7 @@ .globl vdso64_start, vdso64_end .balign PAGE_SIZE vdso64_start: - .incbin "arch/ppc64/kernel/vdso64/vdso64.so" + .incbin "arch/powerpc/kernel/vdso64/vdso64.so" .balign PAGE_SIZE vdso64_end: diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 97082a4203ad..71a6addf9f7f 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -21,6 +21,7 @@ #include <asm/iommu.h> #include <asm/dma.h> #include <asm/vio.h> +#include <asm/prom.h> static const struct vio_device_id *vio_match_device( const struct vio_device_id *, const struct vio_dev *); @@ -265,7 +266,33 @@ static int vio_bus_match(struct device *dev, struct device_driver *drv) return (ids != NULL) && (vio_match_device(ids, vio_dev) != NULL); } +static int vio_hotplug(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + const struct vio_dev *vio_dev = to_vio_dev(dev); + char *cp; + int length; + + if (!num_envp) + return -ENOMEM; + + if (!vio_dev->dev.platform_data) + return -ENODEV; + cp = (char *)get_property(vio_dev->dev.platform_data, "compatible", &length); + if (!cp) + return -ENODEV; + + envp[0] = buffer; + length = scnprintf(buffer, buffer_size, "MODALIAS=vio:T%sS%s", + vio_dev->type, cp); + if (buffer_size - length <= 0) + return -ENOMEM; + envp[1] = NULL; + return 0; +} + struct bus_type vio_bus_type = { .name = "vio", + .hotplug = vio_hotplug, .match = vio_bus_match, }; diff --git a/arch/powerpc/lib/bitops.c b/arch/powerpc/lib/bitops.c index b67ce3004ebf..f68ad71a0187 100644 --- a/arch/powerpc/lib/bitops.c +++ b/arch/powerpc/lib/bitops.c @@ -41,7 +41,7 @@ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, tmp = *p; found_first: - tmp &= (~0UL >> (64 - size)); + tmp &= (~0UL >> (BITS_PER_LONG - size)); if (tmp == 0UL) /* Are any bits set? */ return result + size; /* Nope. */ found_middle: diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index 2a912f411eb4..35bd03c41dd1 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -23,6 +23,7 @@ #if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) #include <asm/hvcall.h> #include <asm/iseries/hv_call.h> +#include <asm/smp.h> void __spin_yield(raw_spinlock_t *lock) { diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 841d8b6323a8..93d4fbfdb724 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -389,5 +389,22 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) } /* kernel has accessed a bad area */ + + printk(KERN_ALERT "Unable to handle kernel paging request for "); + switch (regs->trap) { + case 0x300: + case 0x380: + printk("data at address 0x%08lx\n", regs->dar); + break; + case 0x400: + case 0x480: + printk("instruction fetch\n"); + break; + default: + printk("unknown fault\n"); + } + printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n", + regs->nip); + die("Kernel access of bad area", regs, sig); } diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index af9ca0eb6d55..5d581bb3aa12 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -1,5 +1,5 @@ /* - * Modifications by Kumar Gala (kumar.gala@freescale.com) to support + * Modifications by Kumar Gala (galak@kernel.crashing.org) to support * E500 Book E processors. * * Copyright 2004 Freescale Semiconductor, Inc diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index b2f3dbca6952..706e8a63ced9 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -33,7 +33,6 @@ #include <linux/init.h> #include <linux/signal.h> -#include <asm/ppcdebug.h> #include <asm/processor.h> #include <asm/pgtable.h> #include <asm/mmu.h> @@ -85,10 +84,11 @@ extern unsigned long dart_tablebase; #endif /* CONFIG_U3_DART */ +static unsigned long _SDR1; +struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; + hpte_t *htab_address; unsigned long htab_hash_mask; -unsigned long _SDR1; -struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; int mmu_linear_psize = MMU_PAGE_4K; int mmu_virtual_psize = MMU_PAGE_4K; #ifdef CONFIG_HUGETLB_PAGE @@ -166,7 +166,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, * normal insert callback here. */ #ifdef CONFIG_PPC_ISERIES - if (systemcfg->platform == PLATFORM_ISERIES_LPAR) + if (_machine == PLATFORM_ISERIES_LPAR) ret = iSeries_hpte_insert(hpteg, va, virt_to_abs(paddr), tmp_mode, @@ -175,7 +175,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, else #endif #ifdef CONFIG_PPC_PSERIES - if (systemcfg->platform & PLATFORM_LPAR) + if (_machine & PLATFORM_LPAR) ret = pSeries_lpar_hpte_insert(hpteg, va, virt_to_abs(paddr), tmp_mode, @@ -294,7 +294,7 @@ static void __init htab_init_page_sizes(void) * Not in the device-tree, let's fallback on known size * list for 16M capable GP & GR */ - if ((systemcfg->platform != PLATFORM_ISERIES_LPAR) && + if ((_machine != PLATFORM_ISERIES_LPAR) && cpu_has_feature(CPU_FTR_16M_PAGE)) memcpy(mmu_psize_defs, mmu_psize_defaults_gp, sizeof(mmu_psize_defaults_gp)); @@ -329,12 +329,14 @@ static void __init htab_init_page_sizes(void) */ if (mmu_psize_defs[MMU_PAGE_16M].shift) mmu_huge_psize = MMU_PAGE_16M; + /* With 4k/4level pagetables, we can't (for now) cope with a + * huge page size < PMD_SIZE */ else if (mmu_psize_defs[MMU_PAGE_1M].shift) mmu_huge_psize = MMU_PAGE_1M; /* Calculate HPAGE_SHIFT and sanity check it */ - if (mmu_psize_defs[mmu_huge_psize].shift > 16 && - mmu_psize_defs[mmu_huge_psize].shift < 28) + if (mmu_psize_defs[mmu_huge_psize].shift > MIN_HUGEPTE_SHIFT && + mmu_psize_defs[mmu_huge_psize].shift < SID_SHIFT) HPAGE_SHIFT = mmu_psize_defs[mmu_huge_psize].shift; else HPAGE_SHIFT = 0; /* No huge pages dude ! */ @@ -363,7 +365,7 @@ static int __init htab_dt_scan_pftsize(unsigned long node, static unsigned long __init htab_get_table_size(void) { - unsigned long rnd_mem_size, pteg_count; + unsigned long mem_size, rnd_mem_size, pteg_count; /* If hash size isn't already provided by the platform, we try to * retreive it from the device-tree. If it's not there neither, we @@ -375,8 +377,9 @@ static unsigned long __init htab_get_table_size(void) return 1UL << ppc64_pft_size; /* round mem_size up to next power of 2 */ - rnd_mem_size = 1UL << __ilog2(systemcfg->physicalMemorySize); - if (rnd_mem_size < systemcfg->physicalMemorySize) + mem_size = lmb_phys_mem_size(); + rnd_mem_size = 1UL << __ilog2(mem_size); + if (rnd_mem_size < mem_size) rnd_mem_size <<= 1; /* # pages / 2 */ @@ -385,6 +388,15 @@ static unsigned long __init htab_get_table_size(void) return pteg_count << 7; } +#ifdef CONFIG_MEMORY_HOTPLUG +void create_section_mapping(unsigned long start, unsigned long end) +{ + BUG_ON(htab_bolt_mapping(start, end, start, + _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX, + mmu_linear_psize)); +} +#endif /* CONFIG_MEMORY_HOTPLUG */ + void __init htab_initialize(void) { unsigned long table, htab_size_bytes; @@ -407,15 +419,9 @@ void __init htab_initialize(void) htab_size_bytes = htab_get_table_size(); pteg_count = htab_size_bytes >> 7; - /* For debug, make the HTAB 1/8 as big as it normally would be. */ - ifppcdebug(PPCDBG_HTABSIZE) { - pteg_count >>= 3; - htab_size_bytes = pteg_count << 7; - } - htab_hash_mask = pteg_count - 1; - if (systemcfg->platform & PLATFORM_LPAR) { + if (platform_is_lpar()) { /* Using a hypervisor which owns the htab */ htab_address = NULL; _SDR1 = 0; @@ -436,6 +442,9 @@ void __init htab_initialize(void) /* Initialize the HPT with no entries */ memset((void *)table, 0, htab_size_bytes); + + /* Set SDR1 */ + mtspr(SPRN_SDR1, _SDR1); } mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; @@ -505,6 +514,12 @@ void __init htab_initialize(void) #undef KB #undef MB +void __init htab_initialize_secondary(void) +{ + if (!platform_is_lpar()) + mtspr(SPRN_SDR1, _SDR1); +} + /* * Called by asm hashtable.S for doing lazy icache flush */ @@ -512,6 +527,9 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap) { struct page *page; + if (!pfn_valid(pte_pfn(pte))) + return pp; + page = pte_page(pte); /* page is dirty */ diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 0073a04047e4..426c269e552e 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -212,6 +212,12 @@ static int prepare_high_area_for_htlb(struct mm_struct *mm, unsigned long area) BUG_ON(area >= NUM_HIGH_AREAS); + /* Hack, so that each addresses is controlled by exactly one + * of the high or low area bitmaps, the first high area starts + * at 4GB, not 0 */ + if (start == 0) + start = 0x100000000UL; + /* Check no VMAs are in the region */ vma = find_vma(mm, start); if (vma && (vma->vm_start < end)) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 4612a79dfb6e..7d4b8b5f0606 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -84,9 +84,6 @@ void MMU_init(void); /* XXX should be in current.h -- paulus */ extern struct task_struct *current_set[NR_CPUS]; -char *klimit = _end; -struct device_node *memory_node; - extern int init_bootmem_done; /* diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index dfe7fa37b41a..1134f70f231d 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -20,6 +20,8 @@ * */ +#undef DEBUG + #include <linux/config.h> #include <linux/signal.h> #include <linux/sched.h> @@ -57,7 +59,6 @@ #include <asm/processor.h> #include <asm/mmzone.h> #include <asm/cputable.h> -#include <asm/ppcdebug.h> #include <asm/sections.h> #include <asm/system.h> #include <asm/iommu.h> @@ -65,6 +66,12 @@ #include <asm/vdso.h> #include <asm/imalloc.h> +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + #if PGTABLE_RANGE > USER_VSID_RANGE #warning Limited user VSID range means pagetable space is wasted #endif @@ -73,8 +80,6 @@ #warning TASK_SIZE is smaller than it needs to be. #endif -unsigned long klimit = (unsigned long)_end; - /* max amount of RAM to use */ unsigned long __max_memory; @@ -189,14 +194,14 @@ static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) } #ifdef CONFIG_PPC_64K_PAGES -static const int pgtable_cache_size[2] = { - PTE_TABLE_SIZE, PGD_TABLE_SIZE +static const unsigned int pgtable_cache_size[3] = { + PTE_TABLE_SIZE, PMD_TABLE_SIZE, PGD_TABLE_SIZE }; static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { - "pte_pmd_cache", "pgd_cache", + "pte_pmd_cache", "pmd_cache", "pgd_cache", }; #else -static const int pgtable_cache_size[2] = { +static const unsigned int pgtable_cache_size[2] = { PTE_TABLE_SIZE, PMD_TABLE_SIZE }; static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { @@ -214,6 +219,8 @@ void pgtable_cache_init(void) int size = pgtable_cache_size[i]; const char *name = pgtable_cache_name[i]; + DBG("Allocating page table cache %s (#%d) " + "for size: %08x...\n", name, i, size); pgtable_cache[i] = kmem_cache_create(name, size, size, SLAB_HWCACHE_ALIGN | diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 9b5aa6808eb8..9584608fd768 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -22,35 +22,38 @@ #include "mmu_decl.h" /* for __max_low_memory */ #endif -struct lmb lmb; - #undef DEBUG +#ifdef DEBUG +#include <asm/udbg.h> +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +struct lmb lmb; + void lmb_dump_all(void) { #ifdef DEBUG unsigned long i; - udbg_printf("lmb_dump_all:\n"); - udbg_printf(" memory.cnt = 0x%lx\n", - lmb.memory.cnt); - udbg_printf(" memory.size = 0x%lx\n", - lmb.memory.size); + DBG("lmb_dump_all:\n"); + DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt); + DBG(" memory.size = 0x%lx\n", lmb.memory.size); for (i=0; i < lmb.memory.cnt ;i++) { - udbg_printf(" memory.region[0x%x].base = 0x%lx\n", + DBG(" memory.region[0x%x].base = 0x%lx\n", i, lmb.memory.region[i].base); - udbg_printf(" .size = 0x%lx\n", + DBG(" .size = 0x%lx\n", lmb.memory.region[i].size); } - udbg_printf("\n reserved.cnt = 0x%lx\n", - lmb.reserved.cnt); - udbg_printf(" reserved.size = 0x%lx\n", - lmb.reserved.size); + DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt); + DBG(" reserved.size = 0x%lx\n", lmb.reserved.size); for (i=0; i < lmb.reserved.cnt ;i++) { - udbg_printf(" reserved.region[0x%x].base = 0x%lx\n", + DBG(" reserved.region[0x%x].base = 0x%lx\n", i, lmb.reserved.region[i].base); - udbg_printf(" .size = 0x%lx\n", + DBG(" .size = 0x%lx\n", lmb.reserved.region[i].size); } #endif /* DEBUG */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 7faa46b71f21..4bd7b0a70996 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -46,9 +46,7 @@ #include <asm/prom.h> #include <asm/lmb.h> #include <asm/sections.h> -#ifdef CONFIG_PPC64 #include <asm/vdso.h> -#endif #include "mmu_decl.h" @@ -110,6 +108,7 @@ EXPORT_SYMBOL(phys_mem_access_prot); void online_page(struct page *page) { ClearPageReserved(page); + set_page_count(page, 0); free_cold_page(page); totalram_pages++; num_physpages++; @@ -127,6 +126,9 @@ int __devinit add_memory(u64 start, u64 size) unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; + start += KERNELBASE; + create_section_mapping(start, start + size); + /* this should work for most non-highmem platforms */ zone = pgdata->node_zones; @@ -198,6 +200,8 @@ void show_mem(void) unsigned long flags; pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; page = pgdat_page_nr(pgdat, i); total++; if (PageHighMem(page)) @@ -334,7 +338,7 @@ void __init mem_init(void) struct page *page; unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; - num_physpages = max_pfn; /* RAM is assumed contiguous */ + num_physpages = lmb.memory.size >> PAGE_SHIFT; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); #ifdef CONFIG_NEED_MULTIPLE_NODES @@ -346,11 +350,13 @@ void __init mem_init(void) } } #else - max_mapnr = num_physpages; + max_mapnr = max_pfn; totalram_pages += free_all_bootmem(); #endif for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; page = pgdat_page_nr(pgdat, i); if (PageReserved(page)) reservedpages++; @@ -358,7 +364,7 @@ void __init mem_init(void) } codesize = (unsigned long)&_sdata - (unsigned long)&_stext; - datasize = (unsigned long)&__init_begin - (unsigned long)&_sdata; + datasize = (unsigned long)&_edata - (unsigned long)&_sdata; initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin; bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start; @@ -393,10 +399,8 @@ void __init mem_init(void) mem_init_done = 1; -#ifdef CONFIG_PPC64 /* Initialize the vDSO */ vdso_init(); -#endif } /* diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 4035cad8d7f1..f72cf87364cb 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -17,55 +17,123 @@ #include <linux/nodemask.h> #include <linux/cpu.h> #include <linux/notifier.h> +#include <asm/sparsemem.h> #include <asm/lmb.h> -#include <asm/machdep.h> -#include <asm/abs_addr.h> #include <asm/system.h> +#include <asm/smp.h> static int numa_enabled = 1; static int numa_debug; #define dbg(args...) if (numa_debug) { printk(KERN_INFO args); } -#ifdef DEBUG_NUMA -#define ARRAY_INITIALISER -1 -#else -#define ARRAY_INITIALISER 0 -#endif - -int numa_cpu_lookup_table[NR_CPUS] = { [ 0 ... (NR_CPUS - 1)] = - ARRAY_INITIALISER}; -char *numa_memory_lookup_table; +int numa_cpu_lookup_table[NR_CPUS]; cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES]; -int nr_cpus_in_node[MAX_NUMNODES] = { [0 ... (MAX_NUMNODES -1)] = 0}; - struct pglist_data *node_data[MAX_NUMNODES]; -bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES]; + +EXPORT_SYMBOL(numa_cpu_lookup_table); +EXPORT_SYMBOL(numa_cpumask_lookup_table); +EXPORT_SYMBOL(node_data); + +static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES]; static int min_common_depth; /* - * We need somewhere to store start/span for each node until we have + * We need somewhere to store start/end/node for each region until we have * allocated the real node_data structures. */ +#define MAX_REGIONS (MAX_LMB_REGIONS*2) static struct { - unsigned long node_start_pfn; - unsigned long node_end_pfn; - unsigned long node_present_pages; -} init_node_data[MAX_NUMNODES] __initdata; + unsigned long start_pfn; + unsigned long end_pfn; + int nid; +} init_node_data[MAX_REGIONS] __initdata; -EXPORT_SYMBOL(node_data); -EXPORT_SYMBOL(numa_cpu_lookup_table); -EXPORT_SYMBOL(numa_memory_lookup_table); -EXPORT_SYMBOL(numa_cpumask_lookup_table); -EXPORT_SYMBOL(nr_cpus_in_node); +int __init early_pfn_to_nid(unsigned long pfn) +{ + unsigned int i; + + for (i = 0; init_node_data[i].end_pfn; i++) { + unsigned long start_pfn = init_node_data[i].start_pfn; + unsigned long end_pfn = init_node_data[i].end_pfn; + + if ((start_pfn <= pfn) && (pfn < end_pfn)) + return init_node_data[i].nid; + } + + return -1; +} + +void __init add_region(unsigned int nid, unsigned long start_pfn, + unsigned long pages) +{ + unsigned int i; + + dbg("add_region nid %d start_pfn 0x%lx pages 0x%lx\n", + nid, start_pfn, pages); + + for (i = 0; init_node_data[i].end_pfn; i++) { + if (init_node_data[i].nid != nid) + continue; + if (init_node_data[i].end_pfn == start_pfn) { + init_node_data[i].end_pfn += pages; + return; + } + if (init_node_data[i].start_pfn == (start_pfn + pages)) { + init_node_data[i].start_pfn -= pages; + return; + } + } + + /* + * Leave last entry NULL so we dont iterate off the end (we use + * entry.end_pfn to terminate the walk). + */ + if (i >= (MAX_REGIONS - 1)) { + printk(KERN_ERR "WARNING: too many memory regions in " + "numa code, truncating\n"); + return; + } + + init_node_data[i].start_pfn = start_pfn; + init_node_data[i].end_pfn = start_pfn + pages; + init_node_data[i].nid = nid; +} + +/* We assume init_node_data has no overlapping regions */ +void __init get_region(unsigned int nid, unsigned long *start_pfn, + unsigned long *end_pfn, unsigned long *pages_present) +{ + unsigned int i; + + *start_pfn = -1UL; + *end_pfn = *pages_present = 0; + + for (i = 0; init_node_data[i].end_pfn; i++) { + if (init_node_data[i].nid != nid) + continue; + + *pages_present += init_node_data[i].end_pfn - + init_node_data[i].start_pfn; + + if (init_node_data[i].start_pfn < *start_pfn) + *start_pfn = init_node_data[i].start_pfn; + + if (init_node_data[i].end_pfn > *end_pfn) + *end_pfn = init_node_data[i].end_pfn; + } + + /* We didnt find a matching region, return start/end as 0 */ + if (*start_pfn == -1UL) + start_pfn = 0; +} static inline void map_cpu_to_node(int cpu, int node) { numa_cpu_lookup_table[cpu] = node; - if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node]))) { + + if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node]))) cpu_set(cpu, numa_cpumask_lookup_table[node]); - nr_cpus_in_node[node]++; - } } #ifdef CONFIG_HOTPLUG_CPU @@ -77,7 +145,6 @@ static void unmap_cpu_from_node(unsigned long cpu) if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) { cpu_clear(cpu, numa_cpumask_lookup_table[node]); - nr_cpus_in_node[node]--; } else { printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n", cpu, node); @@ -85,7 +152,7 @@ static void unmap_cpu_from_node(unsigned long cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static struct device_node * __devinit find_cpu_node(unsigned int cpu) +static struct device_node *find_cpu_node(unsigned int cpu) { unsigned int hw_cpuid = get_hard_smp_processor_id(cpu); struct device_node *cpu_node = NULL; @@ -212,7 +279,7 @@ static int __init get_mem_size_cells(void) return rc; } -static unsigned long read_n_cells(int n, unsigned int **buf) +static unsigned long __init read_n_cells(int n, unsigned int **buf) { unsigned long result = 0; @@ -294,7 +361,8 @@ static int cpu_numa_callback(struct notifier_block *nfb, * or zero. If the returned value of size is 0 the region should be * discarded as it lies wholy above the memory limit. */ -static unsigned long __init numa_enforce_memory_limit(unsigned long start, unsigned long size) +static unsigned long __init numa_enforce_memory_limit(unsigned long start, + unsigned long size) { /* * We use lmb_end_of_DRAM() in here instead of memory_limit because @@ -319,8 +387,7 @@ static int __init parse_numa_properties(void) struct device_node *cpu = NULL; struct device_node *memory = NULL; int addr_cells, size_cells; - int max_domain = 0; - long entries = lmb_end_of_DRAM() >> MEMORY_INCREMENT_SHIFT; + int max_domain; unsigned long i; if (numa_enabled == 0) { @@ -328,13 +395,6 @@ static int __init parse_numa_properties(void) return -1; } - numa_memory_lookup_table = - (char *)abs_to_virt(lmb_alloc(entries * sizeof(char), 1)); - memset(numa_memory_lookup_table, 0, entries * sizeof(char)); - - for (i = 0; i < entries ; i++) - numa_memory_lookup_table[i] = ARRAY_INITIALISER; - min_common_depth = find_min_common_depth(); dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth); @@ -386,9 +446,6 @@ new_range: start = read_n_cells(addr_cells, &memcell_buf); size = read_n_cells(size_cells, &memcell_buf); - start = _ALIGN_DOWN(start, MEMORY_INCREMENT); - size = _ALIGN_UP(size, MEMORY_INCREMENT); - numa_domain = of_node_numa_domain(memory); if (numa_domain >= MAX_NUMNODES) { @@ -402,44 +459,15 @@ new_range: if (max_domain < numa_domain) max_domain = numa_domain; - if (! (size = numa_enforce_memory_limit(start, size))) { + if (!(size = numa_enforce_memory_limit(start, size))) { if (--ranges) goto new_range; else continue; } - /* - * Initialize new node struct, or add to an existing one. - */ - if (init_node_data[numa_domain].node_end_pfn) { - if ((start / PAGE_SIZE) < - init_node_data[numa_domain].node_start_pfn) - init_node_data[numa_domain].node_start_pfn = - start / PAGE_SIZE; - if (((start / PAGE_SIZE) + (size / PAGE_SIZE)) > - init_node_data[numa_domain].node_end_pfn) - init_node_data[numa_domain].node_end_pfn = - (start / PAGE_SIZE) + - (size / PAGE_SIZE); - - init_node_data[numa_domain].node_present_pages += - size / PAGE_SIZE; - } else { - node_set_online(numa_domain); - - init_node_data[numa_domain].node_start_pfn = - start / PAGE_SIZE; - init_node_data[numa_domain].node_end_pfn = - init_node_data[numa_domain].node_start_pfn + - size / PAGE_SIZE; - init_node_data[numa_domain].node_present_pages = - size / PAGE_SIZE; - } - - for (i = start ; i < (start+size); i += MEMORY_INCREMENT) - numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = - numa_domain; + add_region(numa_domain, start >> PAGE_SHIFT, + size >> PAGE_SHIFT); if (--ranges) goto new_range; @@ -455,32 +483,18 @@ static void __init setup_nonnuma(void) { unsigned long top_of_ram = lmb_end_of_DRAM(); unsigned long total_ram = lmb_phys_mem_size(); - unsigned long i; + unsigned int i; printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram); printk(KERN_INFO "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); - if (!numa_memory_lookup_table) { - long entries = top_of_ram >> MEMORY_INCREMENT_SHIFT; - numa_memory_lookup_table = - (char *)abs_to_virt(lmb_alloc(entries * sizeof(char), 1)); - memset(numa_memory_lookup_table, 0, entries * sizeof(char)); - for (i = 0; i < entries ; i++) - numa_memory_lookup_table[i] = ARRAY_INITIALISER; - } - map_cpu_to_node(boot_cpuid, 0); - + for (i = 0; i < lmb.memory.cnt; ++i) + add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT, + lmb_size_pages(&lmb.memory, i)); node_set_online(0); - - init_node_data[0].node_start_pfn = 0; - init_node_data[0].node_end_pfn = lmb_end_of_DRAM() / PAGE_SIZE; - init_node_data[0].node_present_pages = total_ram / PAGE_SIZE; - - for (i = 0 ; i < top_of_ram; i += MEMORY_INCREMENT) - numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] = 0; } static void __init dump_numa_topology(void) @@ -498,8 +512,9 @@ static void __init dump_numa_topology(void) count = 0; - for (i = 0; i < lmb_end_of_DRAM(); i += MEMORY_INCREMENT) { - if (numa_memory_lookup_table[i >> MEMORY_INCREMENT_SHIFT] == node) { + for (i = 0; i < lmb_end_of_DRAM(); + i += (1 << SECTION_SIZE_BITS)) { + if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) { if (count == 0) printk(" 0x%lx", i); ++count; @@ -524,10 +539,12 @@ static void __init dump_numa_topology(void) * * Returns the physical address of the memory. */ -static unsigned long careful_allocation(int nid, unsigned long size, - unsigned long align, unsigned long end) +static void __init *careful_allocation(int nid, unsigned long size, + unsigned long align, + unsigned long end_pfn) { - unsigned long ret = lmb_alloc_base(size, align, end); + int new_nid; + unsigned long ret = lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT); /* retry over all memory */ if (!ret) @@ -541,28 +558,27 @@ static unsigned long careful_allocation(int nid, unsigned long size, * If the memory came from a previously allocated node, we must * retry with the bootmem allocator. */ - if (pa_to_nid(ret) < nid) { - nid = pa_to_nid(ret); - ret = (unsigned long)__alloc_bootmem_node(NODE_DATA(nid), + new_nid = early_pfn_to_nid(ret >> PAGE_SHIFT); + if (new_nid < nid) { + ret = (unsigned long)__alloc_bootmem_node(NODE_DATA(new_nid), size, align, 0); if (!ret) panic("numa.c: cannot allocate %lu bytes on node %d", - size, nid); + size, new_nid); - ret = virt_to_abs(ret); + ret = __pa(ret); dbg("alloc_bootmem %lx %lx\n", ret, size); } - return ret; + return (void *)ret; } void __init do_init_bootmem(void) { int nid; - int addr_cells, size_cells; - struct device_node *memory = NULL; + unsigned int i; static struct notifier_block ppc64_numa_nb = { .notifier_call = cpu_numa_callback, .priority = 1 /* Must run before sched domains notifier. */ @@ -580,99 +596,66 @@ void __init do_init_bootmem(void) register_cpu_notifier(&ppc64_numa_nb); for_each_online_node(nid) { - unsigned long start_paddr, end_paddr; - int i; + unsigned long start_pfn, end_pfn, pages_present; unsigned long bootmem_paddr; unsigned long bootmap_pages; - start_paddr = init_node_data[nid].node_start_pfn * PAGE_SIZE; - end_paddr = init_node_data[nid].node_end_pfn * PAGE_SIZE; + get_region(nid, &start_pfn, &end_pfn, &pages_present); /* Allocate the node structure node local if possible */ - NODE_DATA(nid) = (struct pglist_data *)careful_allocation(nid, + NODE_DATA(nid) = careful_allocation(nid, sizeof(struct pglist_data), - SMP_CACHE_BYTES, end_paddr); - NODE_DATA(nid) = abs_to_virt(NODE_DATA(nid)); + SMP_CACHE_BYTES, end_pfn); + NODE_DATA(nid) = __va(NODE_DATA(nid)); memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); dbg("node %d\n", nid); dbg("NODE_DATA() = %p\n", NODE_DATA(nid)); NODE_DATA(nid)->bdata = &plat_node_bdata[nid]; - NODE_DATA(nid)->node_start_pfn = - init_node_data[nid].node_start_pfn; - NODE_DATA(nid)->node_spanned_pages = - end_paddr - start_paddr; + NODE_DATA(nid)->node_start_pfn = start_pfn; + NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn; if (NODE_DATA(nid)->node_spanned_pages == 0) continue; - dbg("start_paddr = %lx\n", start_paddr); - dbg("end_paddr = %lx\n", end_paddr); + dbg("start_paddr = %lx\n", start_pfn << PAGE_SHIFT); + dbg("end_paddr = %lx\n", end_pfn << PAGE_SHIFT); - bootmap_pages = bootmem_bootmap_pages((end_paddr - start_paddr) >> PAGE_SHIFT); + bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn); + bootmem_paddr = (unsigned long)careful_allocation(nid, + bootmap_pages << PAGE_SHIFT, + PAGE_SIZE, end_pfn); + memset(__va(bootmem_paddr), 0, bootmap_pages << PAGE_SHIFT); - bootmem_paddr = careful_allocation(nid, - bootmap_pages << PAGE_SHIFT, - PAGE_SIZE, end_paddr); - memset(abs_to_virt(bootmem_paddr), 0, - bootmap_pages << PAGE_SHIFT); dbg("bootmap_paddr = %lx\n", bootmem_paddr); init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT, - start_paddr >> PAGE_SHIFT, - end_paddr >> PAGE_SHIFT); + start_pfn, end_pfn); - /* - * We need to do another scan of all memory sections to - * associate memory with the correct node. - */ - addr_cells = get_mem_addr_cells(); - size_cells = get_mem_size_cells(); - memory = NULL; - while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { - unsigned long mem_start, mem_size; - int numa_domain, ranges; - unsigned int *memcell_buf; - unsigned int len; - - memcell_buf = (unsigned int *)get_property(memory, "reg", &len); - if (!memcell_buf || len <= 0) - continue; + /* Add free regions on this node */ + for (i = 0; init_node_data[i].end_pfn; i++) { + unsigned long start, end; - ranges = memory->n_addrs; /* ranges in cell */ -new_range: - mem_start = read_n_cells(addr_cells, &memcell_buf); - mem_size = read_n_cells(size_cells, &memcell_buf); - if (numa_enabled) { - numa_domain = of_node_numa_domain(memory); - if (numa_domain >= MAX_NUMNODES) - numa_domain = 0; - } else - numa_domain = 0; - - if (numa_domain != nid) + if (init_node_data[i].nid != nid) continue; - mem_size = numa_enforce_memory_limit(mem_start, mem_size); - if (mem_size) { - dbg("free_bootmem %lx %lx\n", mem_start, mem_size); - free_bootmem_node(NODE_DATA(nid), mem_start, mem_size); - } + start = init_node_data[i].start_pfn << PAGE_SHIFT; + end = init_node_data[i].end_pfn << PAGE_SHIFT; - if (--ranges) /* process all ranges in cell */ - goto new_range; + dbg("free_bootmem %lx %lx\n", start, end - start); + free_bootmem_node(NODE_DATA(nid), start, end - start); } - /* - * Mark reserved regions on this node - */ + /* Mark reserved regions on this node */ for (i = 0; i < lmb.reserved.cnt; i++) { unsigned long physbase = lmb.reserved.region[i].base; unsigned long size = lmb.reserved.region[i].size; + unsigned long start_paddr = start_pfn << PAGE_SHIFT; + unsigned long end_paddr = end_pfn << PAGE_SHIFT; - if (pa_to_nid(physbase) != nid && - pa_to_nid(physbase+size-1) != nid) + if (early_pfn_to_nid(physbase >> PAGE_SHIFT) != nid && + early_pfn_to_nid((physbase+size-1) >> PAGE_SHIFT) != nid) continue; if (physbase < end_paddr && @@ -692,46 +675,19 @@ new_range: size); } } - /* - * This loop may look famaliar, but we have to do it again - * after marking our reserved memory to mark memory present - * for sparsemem. - */ - addr_cells = get_mem_addr_cells(); - size_cells = get_mem_size_cells(); - memory = NULL; - while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { - unsigned long mem_start, mem_size; - int numa_domain, ranges; - unsigned int *memcell_buf; - unsigned int len; - - memcell_buf = (unsigned int *)get_property(memory, "reg", &len); - if (!memcell_buf || len <= 0) - continue; - ranges = memory->n_addrs; /* ranges in cell */ -new_range2: - mem_start = read_n_cells(addr_cells, &memcell_buf); - mem_size = read_n_cells(size_cells, &memcell_buf); - if (numa_enabled) { - numa_domain = of_node_numa_domain(memory); - if (numa_domain >= MAX_NUMNODES) - numa_domain = 0; - } else - numa_domain = 0; - - if (numa_domain != nid) + /* Add regions into sparsemem */ + for (i = 0; init_node_data[i].end_pfn; i++) { + unsigned long start, end; + + if (init_node_data[i].nid != nid) continue; - mem_size = numa_enforce_memory_limit(mem_start, mem_size); - memory_present(numa_domain, mem_start >> PAGE_SHIFT, - (mem_start + mem_size) >> PAGE_SHIFT); + start = init_node_data[i].start_pfn; + end = init_node_data[i].end_pfn; - if (--ranges) /* process all ranges in cell */ - goto new_range2; + memory_present(nid, start, end); } - } } @@ -745,21 +701,18 @@ void __init paging_init(void) memset(zholes_size, 0, sizeof(zholes_size)); for_each_online_node(nid) { - unsigned long start_pfn; - unsigned long end_pfn; + unsigned long start_pfn, end_pfn, pages_present; - start_pfn = init_node_data[nid].node_start_pfn; - end_pfn = init_node_data[nid].node_end_pfn; + get_region(nid, &start_pfn, &end_pfn, &pages_present); zones_size[ZONE_DMA] = end_pfn - start_pfn; - zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - - init_node_data[nid].node_present_pages; + zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - pages_present; dbg("free_area_init node %d %lx %lx (hole: %lx)\n", nid, zones_size[ZONE_DMA], start_pfn, zholes_size[ZONE_DMA]); - free_area_init_node(nid, NODE_DATA(nid), zones_size, - start_pfn, zholes_size); + free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, + zholes_size); } } diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 51b786940971..c7f7bb6f30b3 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -59,7 +59,6 @@ #include <asm/processor.h> #include <asm/mmzone.h> #include <asm/cputable.h> -#include <asm/ppcdebug.h> #include <asm/sections.h> #include <asm/system.h> #include <asm/iommu.h> @@ -123,8 +122,11 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) * */ if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags, - mmu_virtual_psize)) - panic("Can't map bolted IO mapping"); + mmu_virtual_psize)) { + printk(KERN_ERR "Failed to do bolted mapping IO " + "memory at %016lx !\n", pa); + return -ENOMEM; + } } return 0; } diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index d137abd241ff..ed7fcfe5fd37 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -188,9 +188,9 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, if (Hash == 0) return; - pmd = pmd_offset(pgd_offset(vma->vm_mm, address), address); + pmd = pmd_offset(pgd_offset(mm, ea), ea); if (!pmd_none(*pmd)) - add_hash_page(vma->vm_mm->context, address, pmd_val(*pmd)); + add_hash_page(mm->context, ea, pmd_val(*pmd)); } /* diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index 3e18241b6f35..950ffc5848c7 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -80,12 +80,17 @@ _GLOBAL(slb_miss_kernel_load_virtual) BEGIN_FTR_SECTION b 1f END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE) + cmpldi r10,16 + + lhz r9,PACALOWHTLBAREAS(r13) + mr r11,r10 + blt 5f + lhz r9,PACAHIGHHTLBAREAS(r13) srdi r11,r10,(HTLB_AREA_SHIFT-SID_SHIFT) - srd r9,r9,r11 - lhz r11,PACALOWHTLBAREAS(r13) - srd r11,r11,r10 - or. r9,r9,r11 + +5: srd r9,r9,r11 + andi. r9,r9,1 beq 1f _GLOBAL(slb_miss_user_load_huge) li r11,0 diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index fa325dbf98fc..cfbb4e1f966b 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -20,6 +20,7 @@ #include <asm/cputable.h> #include <asm/lmb.h> #include <asm/abs_addr.h> +#include <asm/firmware.h> struct stab_entry { unsigned long esid_data; @@ -256,7 +257,7 @@ void stabs_alloc(void) paca[cpu].stab_addr = newstab; paca[cpu].stab_real = virt_to_abs(newstab); - printk(KERN_DEBUG "Segment table for CPU %d at 0x%lx " + printk(KERN_INFO "Segment table for CPU %d at 0x%lx " "virtual, 0x%lx absolute\n", cpu, paca[cpu].stab_addr, paca[cpu].stab_real); } @@ -270,10 +271,28 @@ void stabs_alloc(void) void stab_initialize(unsigned long stab) { unsigned long vsid = get_kernel_vsid(KERNELBASE); + unsigned long stabreal; asm volatile("isync; slbia; isync":::"memory"); make_ste(stab, GET_ESID(KERNELBASE), vsid); /* Order update */ asm volatile("sync":::"memory"); + + /* Set ASR */ + stabreal = get_paca()->stab_real | 0x1ul; + +#ifdef CONFIG_PPC_ISERIES + if (firmware_has_feature(FW_FEATURE_ISERIES)) { + HvCall1(HvCallBaseSetASR, stabreal); + return; + } +#endif /* CONFIG_PPC_ISERIES */ +#ifdef CONFIG_PPC_PSERIES + if (platform_is_lpar()) { + plpar_hcall_norets(H_SET_ASR, stabreal); + return; + } +#endif + mtspr(SPRN_ASR, stabreal); } diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig index 19d37730b664..eb2dece76a54 100644 --- a/arch/powerpc/oprofile/Kconfig +++ b/arch/powerpc/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c index 86124a94c9af..26539cda6023 100644 --- a/arch/powerpc/oprofile/op_model_fsl_booke.c +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -7,7 +7,7 @@ * Copyright (c) 2004 Freescale Semiconductor, Inc * * Author: Andy Fleming - * Maintainer: Kumar Gala <Kumar.Gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 886449315847..a3401b46f3ba 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -14,9 +14,9 @@ #include <asm/system.h> #include <asm/processor.h> #include <asm/cputable.h> -#include <asm/systemcfg.h> #include <asm/rtas.h> #include <asm/oprofile_impl.h> +#include <asm/reg.h> #define dbg(args...) @@ -81,6 +81,26 @@ static void power4_reg_setup(struct op_counter_config *ctr, extern void ppc64_enable_pmcs(void); +/* + * Older CPUs require the MMCRA sample bit to be always set, but newer + * CPUs only want it set for some groups. Eventually we will remove all + * knowledge of this bit in the kernel, oprofile userspace should be + * setting it when required. + * + * In order to keep current installations working we force the bit for + * those older CPUs. Once everyone has updated their oprofile userspace we + * can remove this hack. + */ +static inline int mmcra_must_set_sample(void) +{ + if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || + __is_processor(PV_970) || __is_processor(PV_970FX) || + __is_processor(PV_970MP)) + return 1; + + return 0; +} + static void power4_cpu_setup(void *unused) { unsigned int mmcr0 = mmcr0_val; @@ -98,7 +118,8 @@ static void power4_cpu_setup(void *unused) mtspr(SPRN_MMCR1, mmcr1_val); - mmcra |= MMCRA_SAMPLE_ENABLE; + if (mmcra_must_set_sample()) + mmcra |= MMCRA_SAMPLE_ENABLE; mtspr(SPRN_MMCRA, mmcra); dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), @@ -211,8 +232,7 @@ static unsigned long get_pc(struct pt_regs *regs) mmcra = mfspr(SPRN_MMCRA); /* Were we in the hypervisor? */ - if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) && - (mmcra & MMCRA_SIHV)) + if (platform_is_lpar() && (mmcra & MMCRA_SIHV)) /* function descriptor madness */ return *((unsigned long *)hypervisor_bucket); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index ecd32d5d85f4..4099ddab9205 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -361,7 +361,9 @@ static void __init chrp_find_openpic(void) printk(KERN_INFO "OpenPIC at %lx\n", opaddr); irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ - prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4); + prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4); + /* i8259 cascade is always positive level */ + init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE; iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); if (iranges == NULL) diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index c1135912cc05..a58daa153686 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -35,7 +35,6 @@ #include <linux/irq.h> #include <linux/spinlock.h> -#include <asm/ppcdebug.h> #include <asm/iseries/hv_types.h> #include <asm/iseries/hv_lp_event.h> #include <asm/iseries/hv_call_xm.h> @@ -43,13 +42,6 @@ #include "irq.h" #include "call_pci.h" -/* This maps virtual irq numbers to real irqs */ -unsigned int virt_irq_to_real_map[NR_IRQS]; - -/* The next available virtual irq number */ -/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */ -static int next_virtual_irq = 2; - static long Pci_Interrupt_Count; static long Pci_Event_Count; @@ -104,6 +96,9 @@ static void intReceived(struct XmPciLpEvent *eventParm, struct pt_regs *regsParm) { int irq; +#ifdef CONFIG_IRQSTACKS + struct thread_info *curtp, *irqtp; +#endif ++Pci_Interrupt_Count; @@ -111,7 +106,20 @@ static void intReceived(struct XmPciLpEvent *eventParm, case XmPciLpEvent_SlotInterrupt: irq = eventParm->hvLpEvent.xCorrelationToken; /* Dispatch the interrupt handlers for this irq */ - ppc_irq_dispatch_handler(regsParm, irq); +#ifdef CONFIG_IRQSTACKS + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + if (curtp != irqtp) { + irqtp->task = curtp->task; + irqtp->flags = 0; + call___do_IRQ(irq, regsParm, irqtp); + irqtp->task = NULL; + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); + } else +#endif + __do_IRQ(irq, regsParm); HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, eventParm->eventData.slotInterrupt.subBusNumber, eventParm->eventData.slotInterrupt.deviceId); @@ -227,8 +235,6 @@ static void iSeries_enable_IRQ(unsigned int irq) /* Unmask secondary INTA */ mask = 0x80000000; HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); - PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); } /* This is called by iSeries_activate_IRQs */ @@ -310,15 +316,11 @@ static void iSeries_disable_IRQ(unsigned int irq) /* Mask secondary INTA */ mask = 0x80000000; HvCallPci_maskInterrupts(bus, subBus, deviceId, mask); - PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); } /* - * Need to define this so ppc_irq_dispatch_handler will NOT call - * enable_IRQ at the end of interrupt handling. However, this does - * nothing because there is not enough information provided to do - * the EOI HvCall. This is done by XmPciLpEvent.c + * This does nothing because there is not enough information + * provided to do the EOI HvCall. This is done by XmPciLpEvent.c */ static void iSeries_end_IRQ(unsigned int irq) { @@ -341,26 +343,14 @@ static hw_irq_controller iSeries_IRQ_handler = { int __init iSeries_allocate_IRQ(HvBusNumber busNumber, HvSubBusNumber subBusNumber, HvAgentId deviceId) { - unsigned int realirq, virtirq; + int virtirq; + unsigned int realirq; u8 idsel = (deviceId >> 4); u8 function = deviceId & 7; - virtirq = next_virtual_irq++; realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; - virt_irq_to_real_map[virtirq] = realirq; + virtirq = virt_irq_create_mapping(realirq); irq_desc[virtirq].handler = &iSeries_IRQ_handler; return virtirq; } - -int virt_irq_create_mapping(unsigned int real_irq) -{ - BUG(); /* Don't call this on iSeries, yet */ - - return 0; -} - -void virt_irq_init(void) -{ - return; -} diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S index 09f14522e176..dfe7aa1ba098 100644 --- a/arch/powerpc/platforms/iseries/misc.S +++ b/arch/powerpc/platforms/iseries/misc.S @@ -15,6 +15,7 @@ #include <asm/processor.h> #include <asm/asm-offsets.h> +#include <asm/ppc_asm.h> .text diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 7d7d5884343f..dafc518fbb83 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -32,7 +32,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/abs_addr.h> @@ -207,10 +206,6 @@ static struct device_node *build_device_node(HvBusNumber Bus, struct device_node *node; struct pci_dn *pdn; - PPCDBG(PPCDBG_BUSWALK, - "-build_device_node 0x%02X.%02X.%02X Function: %02X\n", - Bus, SubBus, AgentId, Function); - node = kmalloc(sizeof(struct device_node), GFP_KERNEL); if (node == NULL) return NULL; @@ -243,27 +238,21 @@ unsigned long __init find_and_init_phbs(void) struct pci_controller *phb; HvBusNumber bus; - PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n"); - /* Check all possible buses. */ for (bus = 0; bus < 256; bus++) { int ret = HvCallXm_testBus(bus); if (ret == 0) { printk("bus %d appears to exist\n", bus); - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + phb = pcibios_alloc_controller(NULL); if (phb == NULL) return -ENOMEM; - pci_setup_pci_controller(phb); phb->pci_mem_offset = phb->local_number = bus; phb->first_busno = bus; phb->last_busno = bus; phb->ops = &iSeries_pci_ops; - PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n", - phb, bus); - /* Find and connect the devices. */ scan_PHB_slots(phb); } @@ -285,11 +274,9 @@ unsigned long __init find_and_init_phbs(void) */ void iSeries_pcibios_init(void) { - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n"); iomm_table_initialize(); find_and_init_phbs(); io_page_mask = -1; - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n"); } /* @@ -301,8 +288,6 @@ void __init iSeries_pci_final_fixup(void) struct device_node *node; int DeviceCount = 0; - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n"); - /* Fix up at the device node and pci_dev relationship */ mf_display_src(0xC9000100); @@ -316,9 +301,6 @@ void __init iSeries_pci_final_fixup(void) ++DeviceCount; pdev->sysdata = (void *)node; PCI_DN(node)->pcidev = pdev; - PPCDBG(PPCDBG_BUSWALK, - "pdev 0x%p <==> DevNode 0x%p\n", - pdev, node); allocate_device_bars(pdev); iSeries_Device_Information(pdev, DeviceCount); iommu_devnode_init_iSeries(node); @@ -333,13 +315,10 @@ void __init iSeries_pci_final_fixup(void) void pcibios_fixup_bus(struct pci_bus *PciBus) { - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n", - PciBus->number); } void pcibios_fixup_resources(struct pci_dev *pdev) { - PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev); } /* @@ -401,9 +380,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus, printk("found device at bus %d idsel %d func %d (AgentId %x)\n", bus, IdSel, Function, AgentId); /* Connect EADs: 0x18.00.12 = 0x00 */ - PPCDBG(PPCDBG_BUSWALK, - "PCI:Connect EADs: 0x%02X.%02X.%02X\n", - bus, SubBus, AgentId); HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId, iseries_hv_addr(BridgeInfo), sizeof(struct HvCallPci_BridgeInfo)); @@ -414,14 +390,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus, BridgeInfo->maxAgents, BridgeInfo->maxSubBusNumber, BridgeInfo->logicalSlotNumber); - PPCDBG(PPCDBG_BUSWALK, - "PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n", - BridgeInfo->busUnitInfo.deviceType, - BridgeInfo->subBusNumber, - BridgeInfo->maxAgents, - BridgeInfo->maxSubBusNumber, - BridgeInfo->logicalSlotNumber); - if (BridgeInfo->busUnitInfo.deviceType == HvCallPci_BridgeDevice) { /* Scan_Bridge_Slot...: 0x18.00.12 */ @@ -454,9 +422,6 @@ static int scan_bridge_slot(HvBusNumber Bus, /* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */ Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel); - PPCDBG(PPCDBG_BUSWALK, - "PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n", - Bus, 0, EADsIdSel, Irq); /* * Connect all functions of any device found. @@ -482,9 +447,6 @@ static int scan_bridge_slot(HvBusNumber Bus, printk("read vendor ID: %x\n", VendorId); /* FoundDevice: 0x18.28.10 = 0x12AE */ - PPCDBG(PPCDBG_BUSWALK, - "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n", - Bus, SubBus, AgentId, VendorId, Irq); HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId, PCI_INTERRUPT_LINE, Irq); if (HvRc != 0) diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index c5207064977d..da26639190db 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -39,7 +39,7 @@ #include <asm/sections.h> #include <asm/iommu.h> #include <asm/firmware.h> - +#include <asm/system.h> #include <asm/time.h> #include <asm/paca.h> #include <asm/cache.h> @@ -71,9 +71,7 @@ extern void hvlog(char *fmt, ...); #endif /* Function Prototypes */ -extern void ppcdbg_initialize(void); - -static void build_iSeries_Memory_Map(void); +static unsigned long build_iSeries_Memory_Map(void); static void iseries_shared_idle(void); static void iseries_dedicated_idle(void); #ifdef CONFIG_PCI @@ -86,7 +84,6 @@ static void iSeries_pci_final_fixup(void) { } int piranha_simulator; extern int rd_size; /* Defined in drivers/block/rd.c */ -extern unsigned long klimit; extern unsigned long embedded_sysmap_start; extern unsigned long embedded_sysmap_end; @@ -309,8 +306,6 @@ static void __init iSeries_init_early(void) ppc64_firmware_features = FW_FEATURE_ISERIES; - ppcdbg_initialize(); - ppc64_interrupt_controller = IC_ISERIES; #if defined(CONFIG_BLK_DEV_INITRD) @@ -407,9 +402,11 @@ void mschunks_alloc(unsigned long num_chunks) * a table used to translate Linux's physical addresses to these * absolute addresses. Absolute addresses are needed when * communicating with the hypervisor (e.g. to build HPT entries) + * + * Returns the physical memory size */ -static void __init build_iSeries_Memory_Map(void) +static unsigned long __init build_iSeries_Memory_Map(void) { u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize; u32 nextPhysChunk; @@ -542,7 +539,7 @@ static void __init build_iSeries_Memory_Map(void) * which should be equal to * nextPhysChunk */ - systemcfg->physicalMemorySize = chunk_to_addr(nextPhysChunk); + return chunk_to_addr(nextPhysChunk); } /* @@ -550,8 +547,6 @@ static void __init build_iSeries_Memory_Map(void) */ static void __init iSeries_setup_arch(void) { - unsigned procIx = get_paca()->lppaca.dyn_hv_phys_proc_index; - if (get_paca()->lppaca.shared_proc) { ppc_md.idle_loop = iseries_shared_idle; printk(KERN_INFO "Using shared processor idle loop\n"); @@ -567,9 +562,6 @@ static void __init iSeries_setup_arch(void) itVpdAreas.xSlicMaxLogicalProcs); printk("Max physical processors = %d\n", itVpdAreas.xSlicMaxPhysicalProcs); - - systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; - printk("Processor version = %x\n", systemcfg->processor); } static void iSeries_show_cpuinfo(struct seq_file *m) @@ -698,20 +690,18 @@ static void iseries_shared_idle(void) if (hvlpevent_is_pending()) process_iSeries_events(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } static void iseries_dedicated_idle(void) { - long oldval; + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { while (!need_resched()) { ppc64_runlatch_off(); HMT_low(); @@ -724,13 +714,12 @@ static void iseries_dedicated_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -935,7 +924,7 @@ void dt_cpus(struct iseries_flat_dt *dt) dt_end_node(dt); } -void build_flat_dt(struct iseries_flat_dt *dt) +void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) { u64 tmp[2]; @@ -951,7 +940,7 @@ void build_flat_dt(struct iseries_flat_dt *dt) dt_prop_str(dt, "name", "memory"); dt_prop_str(dt, "device_type", "memory"); tmp[0] = 0; - tmp[1] = systemcfg->physicalMemorySize; + tmp[1] = phys_mem_size; dt_prop_u64_list(dt, "reg", tmp, 2); dt_end_node(dt); @@ -971,13 +960,15 @@ void build_flat_dt(struct iseries_flat_dt *dt) void * __init iSeries_early_setup(void) { + unsigned long phys_mem_size; + iSeries_fixup_klimit(); /* * Initialize the table which translate Linux physical addresses to * AS/400 absolute addresses */ - build_iSeries_Memory_Map(); + phys_mem_size = build_iSeries_Memory_Map(); iSeries_get_cmdline(); @@ -987,7 +978,7 @@ void * __init iSeries_early_setup(void) /* Parse early parameters, in particular mem=x */ parse_early_param(); - build_flat_dt(&iseries_dt); + build_flat_dt(&iseries_dt, phys_mem_size); return (void *) __pa(&iseries_dt); } diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index 3336bad67724..fcb094ec6aec 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -40,7 +40,6 @@ #include <asm/paca.h> #include <asm/iseries/hv_call.h> #include <asm/time.h> -#include <asm/ppcdebug.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/system.h> diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 340c21caeae2..f40451da037c 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -326,26 +326,12 @@ static int __init add_bridge(struct device_node *dev) dev->full_name); } - hose = alloc_bootmem(sizeof(struct pci_controller)); + hose = pcibios_alloc_controller(dev); if (hose == NULL) return -ENOMEM; - pci_setup_pci_controller(hose); - - hose->arch_data = dev; hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(hose->global_number)); - if (of_prop) { - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(hose->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); - prom_add_property(dev, of_prop); - } - disp_name = NULL; if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); @@ -380,9 +366,6 @@ void __init maple_pcibios_fixup(void) for_each_pci_dev(dev) pci_read_irq_line(dev); - /* Do the mapping of the IO space */ - phbs_remap_io(); - DBG(" <- maple_pcibios_fixup\n"); } diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 4369676f1d54..c9df44fcf571 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -1,7 +1,8 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o obj-$(CONFIG_NVRAM) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index c47f8b69725c..56fd4e05fede 100644 --- a/arch/powerpc/platforms/powermac/cpufreq.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -397,18 +397,16 @@ static int pmac_cpufreq_target( struct cpufreq_policy *policy, unsigned int relation) { unsigned int newstate = 0; + int rc; if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, target_freq, relation, &newstate)) return -EINVAL; - return do_set_cpu_speed(newstate, 1); -} + rc = do_set_cpu_speed(newstate, 1); -unsigned int pmac_get_one_cpufreq(int i) -{ - /* Supports only one CPU for now */ - return (i == 0) ? cur_freq : 0; + ppc_proc_freq = cur_freq * 1000ul; + return rc; } static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) @@ -474,6 +472,8 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy) do_set_cpu_speed(sleep_freq == low_freq ? CPUFREQ_LOW : CPUFREQ_HIGH, 0); + ppc_proc_freq = cur_freq * 1000ul; + no_schedule = 0; return 0; } @@ -547,7 +547,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) */ if (low_freq < 98000000) low_freq = 101000000; - + /* Convert those to CPU core clocks */ low_freq = (low_freq * (*ratio)) / 2000; hi_freq = (hi_freq * (*ratio)) / 2000; @@ -714,6 +714,7 @@ out: pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c new file mode 100644 index 000000000000..39150342c6f1 --- /dev/null +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -0,0 +1,323 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/smu.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* g5_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retreived from the device-tree + */ +static u32 *g5_pmode_data; +static int g5_pmode_max; +static int g5_pmode_cur; + +static DECLARE_MUTEX(g5_switch_mutex); + + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* ----------------- real hardware interface */ + +static void g5_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +static int g5_switch_freq(int speed_mode) +{ + struct cpufreq_freqs freqs; + int to; + + if (g5_pmode_cur == speed_mode) + return 0; + + down(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[speed_mode].frequency; + freqs.cpu = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + up(&g5_switch_mutex); + + return 0; +} + +static int g5_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* ----------------- cpufreq bookkeeping */ + +static int g5_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); +} + +static int g5_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + return g5_switch_freq(newstate); +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + g5_cpu_freqs); +} + + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = g5_cpufreq_verify, + .target = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = g5_cpu_freqs_attr, +}; + + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpunode; + unsigned int psize, ssize; + struct smu_sdbp_header *shdr; + unsigned long max_freq; + u32 *valp; + int rc = -ENODEV; + + /* Look for CPU and SMU nodes */ + cpunode = of_find_node_by_type(NULL, "cpu"); + if (!cpunode) { + DBG("No CPU node !\n"); + return -ENODEV; + } + + /* Check 970FX for now */ + valp = (u32 *)get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + if (((*valp) >> 16) != 0x3c) { + DBG("Wrong CPU version: %08x\n", *valp); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Check current frequency */ + g5_pmode_cur = g5_query_freq(); + if (g5_pmode_cur > 1) + /* We don't support anything but 1:1 and 1:2, fixup ... */ + g5_pmode_cur = 1; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_freq(g5_pmode_cur); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 10f1d942c661..0d7fa00fcb00 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2362,6 +2362,14 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, + { "PowerBook5,8", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,9", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, { "PowerBook6,1", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 8f818d092e2b..443be526cde7 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -640,15 +640,16 @@ static void __init setup_u3_ht(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, + 0x02000000); /* - * /ht node doesn't expose a "ranges" property, so we "remove" regions that - * have been allocated to AGP. So far, this version of the code doesn't assign - * any of the 0xfxxxxxxx "fine" memory regions to /ht. - * We need to fix that sooner or later by either parsing all child "ranges" - * properties or figuring out the U3 address space decoding logic and - * then read its configuration register (if any). + * /ht node doesn't expose a "ranges" property, so we "remove" + * regions that have been allocated to AGP. So far, this version of + * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions + * to /ht. We need to fix that sooner or later by either parsing all + * child "ranges" properties or figuring out the U3 address space + * decoding logic and then read its configuration register (if any). */ hose->io_base_phys = 0xf4000000; hose->pci_io_size = 0x00400000; @@ -671,10 +672,10 @@ static void __init setup_u3_ht(struct pci_controller* hose) return; } - /* We "remove" the AGP resources from the resources allocated to HT, that - * is we create "holes". However, that code does assumptions that so far - * happen to be true (cross fingers...), typically that resources in the - * AGP node are properly ordered + /* We "remove" the AGP resources from the resources allocated to HT, + * that is we create "holes". However, that code does assumptions + * that so far happen to be true (cross fingers...), typically that + * resources in the AGP node are properly ordered */ cur = 0; for (i=0; i<3; i++) { @@ -684,23 +685,30 @@ static void __init setup_u3_ht(struct pci_controller* hose) /* We don't care about "fine" resources */ if (res->start >= 0xf0000000) continue; - /* Check if it's just a matter of "shrinking" us in one direction */ + /* Check if it's just a matter of "shrinking" us in one + * direction + */ if (hose->mem_resources[cur].start == res->start) { DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].start, res->end + 1); + cur, hose->mem_resources[cur].start, + res->end + 1); hose->mem_resources[cur].start = res->end + 1; continue; } if (hose->mem_resources[cur].end == res->end) { DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].end, res->start - 1); + cur, hose->mem_resources[cur].end, + res->start - 1); hose->mem_resources[cur].end = res->start - 1; continue; } /* No, it's not the case, we need a hole */ if (cur == 2) { - /* not enough resources for a hole, we drop part of the range */ - printk(KERN_WARNING "Running out of resources for /ht host !\n"); + /* not enough resources for a hole, we drop part + * of the range + */ + printk(KERN_WARNING "Running out of resources" + " for /ht host !\n"); hose->mem_resources[cur].end = res->start - 1; continue; } @@ -714,17 +722,6 @@ static void __init setup_u3_ht(struct pci_controller* hose) hose->mem_resources[cur-1].end = res->start - 1; } } - -/* XXX this needs to be converged between ppc32 and ppc64... */ -static struct pci_controller * __init pcibios_alloc_controller(void) -{ - struct pci_controller *hose; - - hose = alloc_bootmem(sizeof(struct pci_controller)); - if (hose) - pci_setup_pci_controller(hose); - return hose; -} #endif /* @@ -756,11 +753,16 @@ static int __init add_bridge(struct device_node *dev) #endif bus_range = (int *) get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); } + /* XXX Different prototypes, to be merged */ +#ifdef CONFIG_PPC64 + hose = pcibios_alloc_controller(dev); +#else hose = pcibios_alloc_controller(); +#endif if (!hose) return -ENOMEM; hose->arch_data = dev; @@ -768,7 +770,7 @@ static int __init add_bridge(struct device_node *dev) hose->last_busno = bus_range ? bus_range[1] : 0xff; disp_name = NULL; -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); disp_name = "U3-AGP"; @@ -918,9 +920,6 @@ void __init pmac_pci_init(void) PCI_DN(np)->busno = 0xf0; } - /* map in PCI I/O space */ - phbs_remap_io(); - /* pmac_check_ht_link(); */ /* Tell pci.c to not use the common resource allocation mechanism */ diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 83a49e80ac29..90040c49494d 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -74,6 +74,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; + /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 80b58c1ec412..7acb0546671f 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -193,18 +193,6 @@ static void pmac_show_cpuinfo(struct seq_file *m) pmac_newworld ? "NewWorld" : "OldWorld"); } -static void pmac_show_percpuinfo(struct seq_file *m, int i) -{ -#ifdef CONFIG_CPU_FREQ_PMAC - extern unsigned int pmac_get_one_cpufreq(int i); - unsigned int freq = pmac_get_one_cpufreq(i); - if (freq != 0) { - seq_printf(m, "clock\t\t: %dMHz\n", freq/1000); - return; - } -#endif /* CONFIG_CPU_FREQ_PMAC */ -} - #ifndef CONFIG_ADB_CUDA int find_via_cuda(void) { @@ -767,7 +755,6 @@ struct machdep_calls __initdata pmac_md = { .setup_arch = pmac_setup_arch, .init_early = pmac_init_early, .show_cpuinfo = pmac_show_cpuinfo, - .show_percpuinfo = pmac_show_percpuinfo, .init_IRQ = pmac_pic_init, .get_irq = mpic_get_irq, /* changed later */ .pcibios_fixup = pmac_pcibios_fixup, diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index e1f9443cc872..957b09103422 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -305,9 +305,19 @@ static int __init smp_psurge_probe(void) psurge_start = ioremap(PSURGE_START, 4); psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); - /* this is not actually strictly necessary -- paulus. */ - for (i = 1; i < ncpus; ++i) - smp_hw_index[i] = i; + /* + * This is necessary because OF doesn't know about the + * secondary cpu(s), and thus there aren't nodes in the + * device tree for them, and smp_setup_cpu_maps hasn't + * set their bits in cpu_possible_map and cpu_present_map. + */ + if (ncpus > NR_CPUS) + ncpus = NR_CPUS; + for (i = 1; i < ncpus ; ++i) { + cpu_set(i, cpu_present_map); + cpu_set(i, cpu_possible_map); + set_hard_smp_processor_id(i, i); + } if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); @@ -348,6 +358,7 @@ static void __init psurge_dual_sync_tb(int cpu_nr) int t; set_dec(tb_ticks_per_jiffy); + /* XXX fixme */ set_tb(0, 0); last_jiffy_stamp(cpu_nr) = 0; @@ -363,8 +374,6 @@ static void __init psurge_dual_sync_tb(int cpu_nr) /* now interrupt the secondary, starting both TBs */ psurge_set_ipi(1); - - smp_tb_synchronized = 1; } static struct irqaction psurge_irqaction = { @@ -625,9 +634,8 @@ void smp_core99_give_timebase(void) for (t = 100000; t > 0 && sec_tb_reset; --t) udelay(10); if (sec_tb_reset) + /* XXX BUG_ON here? */ printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); - else - smp_tb_synchronized = 1; /* Now, restart the timebase by leaving the GPIO to an open collector */ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); @@ -810,19 +818,9 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) } -/* Core99 Macs (dual G4s and G5s) */ -struct smp_ops_t core99_smp_ops = { - .message_pass = smp_mpic_message_pass, - .probe = smp_core99_probe, - .kick_cpu = smp_core99_kick_cpu, - .setup_cpu = smp_core99_setup_cpu, - .give_timebase = smp_core99_give_timebase, - .take_timebase = smp_core99_take_timebase, -}; - #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) -int __cpu_disable(void) +int smp_core99_cpu_disable(void) { cpu_clear(smp_processor_id(), cpu_online_map); @@ -846,7 +844,7 @@ void cpu_die(void) low_cpu_die(); } -void __cpu_die(unsigned int cpu) +void smp_core99_cpu_die(unsigned int cpu) { int timeout; @@ -858,8 +856,21 @@ void __cpu_die(unsigned int cpu) } msleep(1); } - cpu_callin_map[cpu] = 0; cpu_dead[cpu] = 0; } #endif + +/* Core99 Macs (dual G4s and G5s) */ +struct smp_ops_t core99_smp_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_core99_probe, + .kick_cpu = smp_core99_kick_cpu, + .setup_cpu = smp_core99_setup_cpu, + .give_timebase = smp_core99_give_timebase, + .take_timebase = smp_core99_take_timebase, +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) + .cpu_disable = smp_core99_cpu_disable, + .cpu_die = smp_core99_cpu_die, +#endif +}; diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 5947b21a8588..feb0a94e7819 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -102,7 +102,7 @@ static unsigned long from_rtc_time(struct rtc_time *tm) static unsigned long cuda_get_time(void) { struct adb_request req; - unsigned long now; + unsigned int now; if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0) return 0; @@ -113,7 +113,7 @@ static unsigned long cuda_get_time(void) req.reply_len); now = (req.reply[3] << 24) + (req.reply[4] << 16) + (req.reply[5] << 8) + req.reply[6]; - return now - RTC_OFFSET; + return ((unsigned long)now) - RTC_OFFSET; } #define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm)) @@ -146,7 +146,7 @@ static int cuda_set_rtc_time(struct rtc_time *tm) static unsigned long pmu_get_time(void) { struct adb_request req; - unsigned long now; + unsigned int now; if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) return 0; @@ -156,7 +156,7 @@ static unsigned long pmu_get_time(void) req.reply_len); now = (req.reply[0] << 24) + (req.reply[1] << 16) + (req.reply[2] << 8) + req.reply[3]; - return now - RTC_OFFSET; + return ((unsigned long)now) - RTC_OFFSET; } #define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm)) @@ -199,6 +199,7 @@ static unsigned long smu_get_time(void) #define smu_set_rtc_time(tm, spin) 0 #endif +/* Can't be __init, it's called when suspending and resuming */ unsigned long pmac_get_boot_time(void) { /* Get the time from the RTC, used only at boot time */ diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index b9938fece781..06d5ef501218 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -3,3 +3,8 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o +obj-$(CONFIG_SCANLOG) += scanlog.o +obj-$(CONFIG_EEH) += eeh.o eeh_event.o + +obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o +obj-$(CONFIG_HVCS) += hvcserver.o diff --git a/arch/ppc64/kernel/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 035d1b14a207..79de2310e70b 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1,39 +1,37 @@ /* * eeh.c * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/bootmem.h> +#include <linux/delay.h> #include <linux/init.h> #include <linux/list.h> -#include <linux/mm.h> -#include <linux/notifier.h> #include <linux/pci.h> #include <linux/proc_fs.h> #include <linux/rbtree.h> #include <linux/seq_file.h> #include <linux/spinlock.h> +#include <asm/atomic.h> #include <asm/eeh.h> +#include <asm/eeh_event.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/rtas.h> -#include <asm/atomic.h> -#include <asm/systemcfg.h> #include <asm/ppc-pci.h> +#include <asm/rtas.h> #undef DEBUG @@ -49,8 +47,8 @@ * were "empty": all reads return 0xff's and all writes are silently * ignored. EEH slot isolation events can be triggered by parity * errors on the address or data busses (e.g. during posted writes), - * which in turn might be caused by dust, vibration, humidity, - * radioactivity or plain-old failed hardware. + * which in turn might be caused by low voltage on the bus, dust, + * vibration, humidity, radioactivity or plain-old failed hardware. * * Note, however, that one of the leading causes of EEH slot * freeze events are buggy device drivers, buggy device microcode, @@ -71,26 +69,15 @@ * and sent out for processing. */ -/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) - -/* EEH event workqueue setup. */ -static DEFINE_SPINLOCK(eeh_eventlist_lock); -LIST_HEAD(eeh_eventlist); -static void eeh_event_handler(void *); -DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL); - -static struct notifier_block *eeh_notifier_chain; - -/* - * If a device driver keeps reading an MMIO register in an interrupt +/* If a device driver keeps reading an MMIO register in an interrupt * handler after a slot isolation event has occurred, we assume it * is broken and panic. This sets the threshold for how many read * attempts we allow before panicking. */ -#define EEH_MAX_FAILS 1000 -static atomic_t eeh_fail_count; +#define EEH_MAX_FAILS 100000 + +/* Misc forward declaraions */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn); /* RTAS tokens */ static int ibm_set_eeh_option; @@ -101,12 +88,19 @@ static int ibm_slot_error_detail; static int eeh_subsystem_enabled; +/* Lock to avoid races due to multiple reports of an error */ +static DEFINE_SPINLOCK(confirm_error_lock); + /* Buffer for reporting slot-error-detail rtas calls */ static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(slot_errbuf_lock); static int eeh_error_buf_size; /* System monitoring statistics */ +static DEFINE_PER_CPU(unsigned long, no_device); +static DEFINE_PER_CPU(unsigned long, no_dn); +static DEFINE_PER_CPU(unsigned long, no_cfg_addr); +static DEFINE_PER_CPU(unsigned long, ignored_check); static DEFINE_PER_CPU(unsigned long, total_mmio_ffs); static DEFINE_PER_CPU(unsigned long, false_positives); static DEFINE_PER_CPU(unsigned long, ignored_failures); @@ -224,9 +218,9 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, while (*p) { parent = *p; piar = rb_entry(parent, struct pci_io_addr_range, rb_node); - if (alo < piar->addr_lo) { + if (ahi < piar->addr_lo) { p = &parent->rb_left; - } else if (ahi > piar->addr_hi) { + } else if (alo > piar->addr_hi) { p = &parent->rb_right; } else { if (dev != piar->pcidev || @@ -245,6 +239,11 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, piar->pcidev = dev; piar->flags = flags; +#ifdef DEBUG + printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", + alo, ahi, pci_name (dev)); +#endif + rb_link_node(&piar->rb_node, parent, p); rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); @@ -260,18 +259,17 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", - pci_name(dev)); + printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev)); return; } /* Skip any devices for which EEH is not enabled. */ - pdn = dn->data; + pdn = PCI_DN(dn); if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { #ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s\n", - pci_name(dev)); + printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", + pci_name(dev), pdn->node->full_name); #endif return; } @@ -307,7 +305,7 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) * we maintain a cache of devices that can be quickly searched. * This routine adds a device to that cache. */ -void pci_addr_cache_insert_device(struct pci_dev *dev) +static void pci_addr_cache_insert_device(struct pci_dev *dev) { unsigned long flags; @@ -350,7 +348,7 @@ restart: * the tree multiple times (once per resource). * But so what; device removal doesn't need to be that fast. */ -void pci_addr_cache_remove_device(struct pci_dev *dev) +static void pci_addr_cache_remove_device(struct pci_dev *dev) { unsigned long flags; @@ -370,8 +368,12 @@ void pci_addr_cache_remove_device(struct pci_dev *dev) */ void __init pci_addr_cache_build(void) { + struct device_node *dn; struct pci_dev *dev = NULL; + if (!eeh_subsystem_enabled) + return; + spin_lock_init(&pci_io_addr_cache_root.piar_lock); while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { @@ -380,6 +382,10 @@ void __init pci_addr_cache_build(void) continue; } pci_addr_cache_insert_device(dev); + + /* Save the BAR's; firmware doesn't restore these after EEH reset */ + dn = pci_device_to_OF_node(dev); + eeh_save_bars(dev, PCI_DN(dn)); } #ifdef DEBUG @@ -391,22 +397,26 @@ void __init pci_addr_cache_build(void) /* --------------------------------------------------------------- */ /* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */ -/** - * eeh_register_notifier - Register to find out about EEH events. - * @nb: notifier block to callback on events - */ -int eeh_register_notifier(struct notifier_block *nb) +void eeh_slot_error_detail (struct pci_dn *pdn, int severity) { - return notifier_chain_register(&eeh_notifier_chain, nb); -} + unsigned long flags; + int rc; -/** - * eeh_unregister_notifier - Unregister to an EEH event notifier. - * @nb: notifier block to callback on events - */ -int eeh_unregister_notifier(struct notifier_block *nb) -{ - return notifier_chain_unregister(&eeh_notifier_chain, nb); + /* Log the error with the rtas logger */ + spin_lock_irqsave(&slot_errbuf_lock, flags); + memset(slot_errbuf, 0, eeh_error_buf_size); + + rc = rtas_call(ibm_slot_error_detail, + 8, 1, NULL, pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), NULL, 0, + virt_to_phys(slot_errbuf), + eeh_error_buf_size, + severity); + + if (rc == 0) + log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); + spin_unlock_irqrestore(&slot_errbuf_lock, flags); } /** @@ -414,16 +424,16 @@ int eeh_unregister_notifier(struct notifier_block *nb) * @dn: device node to read * @rets: array to return results in */ -static int read_slot_reset_state(struct device_node *dn, int rets[]) +static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) { int token, outputs; - struct pci_dn *pdn = dn->data; if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { token = ibm_read_slot_reset_state2; outputs = 4; } else { token = ibm_read_slot_reset_state; + rets[2] = 0; /* fake PE Unavailable info */ outputs = 3; } @@ -432,87 +442,84 @@ static int read_slot_reset_state(struct device_node *dn, int rets[]) } /** - * eeh_panic - call panic() for an eeh event that cannot be handled. - * The philosophy of this routine is that it is better to panic and - * halt the OS than it is to risk possible data corruption by - * oblivious device drivers that don't know better. - * - * @dev pci device that had an eeh event - * @reset_state current reset state of the device slot + * eeh_token_to_phys - convert EEH address token to phys address + * @token i/o token, should be address in the form 0xA.... */ -static void eeh_panic(struct pci_dev *dev, int reset_state) +static inline unsigned long eeh_token_to_phys(unsigned long token) { - /* - * XXX We should create a separate sysctl for this. - * - * Since the panic_on_oops sysctl is used to halt the system - * in light of potential corruption, we can use it here. - */ - if (panic_on_oops) - panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, - pci_name(dev)); - else { - __get_cpu_var(ignored_failures)++; - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", - reset_state, pci_name(dev)); - } + pte_t *ptep; + unsigned long pa; + + ptep = find_linux_pte(init_mm.pgd, token); + if (!ptep) + return token; + pa = pte_pfn(*ptep) << PAGE_SHIFT; + + return pa | (token & (PAGE_SIZE-1)); } -/** - * eeh_event_handler - dispatch EEH events. The detection of a frozen - * slot can occur inside an interrupt, where it can be hard to do - * anything about it. The goal of this routine is to pull these - * detection events out of the context of the interrupt handler, and - * re-dispatch them for processing at a later time in a normal context. - * - * @dummy - unused +/** + * Return the "partitionable endpoint" (pe) under which this device lies */ -static void eeh_event_handler(void *dummy) +static struct device_node * find_device_pe(struct device_node *dn) { - unsigned long flags; - struct eeh_event *event; - - while (1) { - spin_lock_irqsave(&eeh_eventlist_lock, flags); - event = NULL; - if (!list_empty(&eeh_eventlist)) { - event = list_entry(eeh_eventlist.next, struct eeh_event, list); - list_del(&event->list); - } - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - if (event == NULL) - break; - - printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device " - "%s\n", event->reset_state, - pci_name(event->dev)); + while ((dn->parent) && PCI_DN(dn->parent) && + (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { + dn = dn->parent; + } + return dn; +} - atomic_set(&eeh_fail_count, 0); - notifier_call_chain (&eeh_notifier_chain, - EEH_NOTIFY_FREEZE, event); +/** Mark all devices that are peers of this device as failed. + * Mark the device driver too, so that it can see the failure + * immediately; this is critical, since some drivers poll + * status registers in interrupts ... If a driver is polling, + * and the slot is frozen, then the driver can deadlock in + * an interrupt context, which is bad. + */ - __get_cpu_var(slot_resets)++; +static void __eeh_mark_slot (struct device_node *dn, int mode_flag) +{ + while (dn) { + if (PCI_DN(dn)) { + PCI_DN(dn)->eeh_mode |= mode_flag; - pci_dev_put(event->dev); - kfree(event); + if (dn->child) + __eeh_mark_slot (dn->child, mode_flag); + } + dn = dn->sibling; } } -/** - * eeh_token_to_phys - convert EEH address token to phys address - * @token i/o token, should be address in the form 0xE.... - */ -static inline unsigned long eeh_token_to_phys(unsigned long token) +void eeh_mark_slot (struct device_node *dn, int mode_flag) { - pte_t *ptep; - unsigned long pa; + dn = find_device_pe (dn); + PCI_DN(dn)->eeh_mode |= mode_flag; + __eeh_mark_slot (dn->child, mode_flag); +} - ptep = find_linux_pte(init_mm.pgd, token); - if (!ptep) - return token; - pa = pte_pfn(*ptep) << PAGE_SHIFT; +static void __eeh_clear_slot (struct device_node *dn, int mode_flag) +{ + while (dn) { + if (PCI_DN(dn)) { + PCI_DN(dn)->eeh_mode &= ~mode_flag; + PCI_DN(dn)->eeh_check_count = 0; + if (dn->child) + __eeh_clear_slot (dn->child, mode_flag); + } + dn = dn->sibling; + } +} - return pa | (token & (PAGE_SIZE-1)); +void eeh_clear_slot (struct device_node *dn, int mode_flag) +{ + unsigned long flags; + spin_lock_irqsave(&confirm_error_lock, flags); + dn = find_device_pe (dn); + PCI_DN(dn)->eeh_mode &= ~mode_flag; + PCI_DN(dn)->eeh_check_count = 0; + __eeh_clear_slot (dn->child, mode_flag); + spin_unlock_irqrestore(&confirm_error_lock, flags); } /** @@ -526,7 +533,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) * will query firmware for the EEH status. * * Returns 0 if there has not been an EEH error; otherwise returns - * a non-zero value and queues up a solt isolation event notification. + * a non-zero value and queues up a slot isolation event notification. * * It is safe to call this routine in an interrupt context. */ @@ -535,42 +542,59 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) int ret; int rets[3]; unsigned long flags; - int rc, reset_state; - struct eeh_event *event; struct pci_dn *pdn; + int rc = 0; __get_cpu_var(total_mmio_ffs)++; if (!eeh_subsystem_enabled) return 0; - if (!dn) + if (!dn) { + __get_cpu_var(no_dn)++; return 0; - pdn = dn->data; + } + pdn = PCI_DN(dn); /* Access to IO BARs might get this far and still not want checking. */ - if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { + __get_cpu_var(ignored_check)++; +#ifdef DEBUG + printk ("EEH:ignored check (%x) for %s %s\n", + pdn->eeh_mode, pci_name (dev), dn->full_name); +#endif return 0; } if (!pdn->eeh_config_addr) { + __get_cpu_var(no_cfg_addr)++; return 0; } - /* - * If we already have a pending isolation event for this - * slot, we know it's bad already, we don't need to check... + /* If we already have a pending isolation event for this + * slot, we know it's bad already, we don't need to check. + * Do this checking under a lock; as multiple PCI devices + * in one slot might report errors simultaneously, and we + * only want one error recovery routine running. */ + spin_lock_irqsave(&confirm_error_lock, flags); + rc = 1; if (pdn->eeh_mode & EEH_MODE_ISOLATED) { - atomic_inc(&eeh_fail_count); - if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) { + pdn->eeh_check_count ++; + if (pdn->eeh_check_count >= EEH_MAX_FAILS) { + printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n", + pdn->eeh_check_count); + dump_stack(); + /* re-read the slot reset state */ - if (read_slot_reset_state(dn, rets) != 0) + if (read_slot_reset_state(pdn, rets) != 0) rets[0] = -1; /* reset state unknown */ - eeh_panic(dev, rets[0]); + + /* If we are here, then we hit an infinite loop. Stop. */ + panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev)); } - return 0; + goto dn_unlock; } /* @@ -580,66 +604,69 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * function zero of a multi-function device. * In any case they must share a common PHB. */ - ret = read_slot_reset_state(dn, rets); - if (!(ret == 0 && rets[1] == 1 && (rets[0] == 2 || rets[0] == 4))) { + ret = read_slot_reset_state(pdn, rets); + + /* If the call to firmware failed, punt */ + if (ret != 0) { + printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n", + ret, dn->full_name); __get_cpu_var(false_positives)++; - return 0; + rc = 0; + goto dn_unlock; } - /* prevent repeated reports of this failure */ - pdn->eeh_mode |= EEH_MODE_ISOLATED; - - reset_state = rets[0]; - - spin_lock_irqsave(&slot_errbuf_lock, flags); - memset(slot_errbuf, 0, eeh_error_buf_size); - - rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, pdn->eeh_config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), NULL, 0, - virt_to_phys(slot_errbuf), - eeh_error_buf_size, - 1 /* Temporary Error */); - - if (rc == 0) - log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); - spin_unlock_irqrestore(&slot_errbuf_lock, flags); + /* If EEH is not supported on this device, punt. */ + if (rets[1] != 1) { + printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n", + ret, dn->full_name); + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n", - rets[0], dn->name, dn->full_name); - event = kmalloc(sizeof(*event), GFP_ATOMIC); - if (event == NULL) { - eeh_panic(dev, reset_state); - return 1; - } + /* If not the kind of error we know about, punt. */ + if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) { + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - event->dev = dev; - event->dn = dn; - event->reset_state = reset_state; + /* Note that config-io to empty slots may fail; + * we recognize empty because they don't have children. */ + if ((rets[0] == 5) && (dn->child == NULL)) { + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - /* We may or may not be called in an interrupt context */ - spin_lock_irqsave(&eeh_eventlist_lock, flags); - list_add(&event->list, &eeh_eventlist); - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + __get_cpu_var(slot_resets)++; + + /* Avoid repeated reports of this failure, including problems + * with other functions on this device, and functions under + * bridges. */ + eeh_mark_slot (dn, EEH_MODE_ISOLATED); + spin_unlock_irqrestore(&confirm_error_lock, flags); + eeh_send_failure_event (dn, dev, rets[0], rets[2]); + /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure * out what happened. So print that out. */ - dump_stack(); - schedule_work(&eeh_event_wq); + if (rets[0] != 5) dump_stack(); + return 1; - return 0; +dn_unlock: + spin_unlock_irqrestore(&confirm_error_lock, flags); + return rc; } -EXPORT_SYMBOL(eeh_dn_check_failure); +EXPORT_SYMBOL_GPL(eeh_dn_check_failure); /** * eeh_check_failure - check if all 1's data is due to EEH slot freeze * @token i/o token, should be address in the form 0xA.... * @val value, should be all 1's (XXX why do we need this arg??) * - * Check for an eeh failure at the given token address. * Check for an EEH failure at the given token address. Call this * routine if the result of a read was all 0xff's and you want to * find out if this is due to an EEH slot freeze event. This routine @@ -656,8 +683,10 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon /* Finding the phys addr + pci device; this is pretty quick. */ addr = eeh_token_to_phys((unsigned long __force) token); dev = pci_get_device_by_addr(addr); - if (!dev) + if (!dev) { + __get_cpu_var(no_device)++; return val; + } dn = pci_device_to_OF_node(dev); eeh_dn_check_failure (dn, dev); @@ -668,6 +697,217 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon EXPORT_SYMBOL(eeh_check_failure); +/* ------------------------------------------------------------- */ +/* The code below deals with error recovery */ + +/** Return negative value if a permanent error, else return + * a number of milliseconds to wait until the PCI slot is + * ready to be used. + */ +static int +eeh_slot_availability(struct pci_dn *pdn) +{ + int rc; + int rets[3]; + + rc = read_slot_reset_state(pdn, rets); + + if (rc) return rc; + + if (rets[1] == 0) return -1; /* EEH is not supported */ + if (rets[0] == 0) return 0; /* Oll Korrect */ + if (rets[0] == 5) { + if (rets[2] == 0) return -1; /* permanently unavailable */ + return rets[2]; /* number of millisecs to wait */ + } + return -1; +} + +/** rtas_pci_slot_reset raises/lowers the pci #RST line + * state: 1/0 to raise/lower the #RST + * + * Clear the EEH-frozen condition on a slot. This routine + * asserts the PCI #RST line if the 'state' argument is '1', + * and drops the #RST line if 'state is '0'. This routine is + * safe to call in an interrupt context. + * + */ + +static void +rtas_pci_slot_reset(struct pci_dn *pdn, int state) +{ + int rc; + + BUG_ON (pdn==NULL); + + if (!pdn->phb) { + printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", + pdn->node->full_name); + return; + } + + rc = rtas_call(ibm_set_slot_reset,4,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), + state); + if (rc) { + printk (KERN_WARNING "EEH: Unable to reset the failed slot, (%d) #RST=%d dn=%s\n", + rc, state, pdn->node->full_name); + return; + } +} + +/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second + * dn -- device node to be reset. + */ + +void +rtas_set_slot_reset(struct pci_dn *pdn) +{ + int i, rc; + + rtas_pci_slot_reset (pdn, 1); + + /* The PCI bus requires that the reset be held high for at least + * a 100 milliseconds. We wait a bit longer 'just in case'. */ + +#define PCI_BUS_RST_HOLD_TIME_MSEC 250 + msleep (PCI_BUS_RST_HOLD_TIME_MSEC); + + /* We might get hit with another EEH freeze as soon as the + * pci slot reset line is dropped. Make sure we don't miss + * these, and clear the flag now. */ + eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED); + + rtas_pci_slot_reset (pdn, 0); + + /* After a PCI slot has been reset, the PCI Express spec requires + * a 1.5 second idle time for the bus to stabilize, before starting + * up traffic. */ +#define PCI_BUS_SETTLE_TIME_MSEC 1800 + msleep (PCI_BUS_SETTLE_TIME_MSEC); + + /* Now double check with the firmware to make sure the device is + * ready to be used; if not, wait for recovery. */ + for (i=0; i<10; i++) { + rc = eeh_slot_availability (pdn); + if (rc <= 0) break; + + msleep (rc+100); + } +} + +/* ------------------------------------------------------- */ +/** Save and restore of PCI BARs + * + * Although firmware will set up BARs during boot, it doesn't + * set up device BAR's after a device reset, although it will, + * if requested, set up bridge configuration. Thus, we need to + * configure the PCI devices ourselves. + */ + +/** + * __restore_bars - Restore the Base Address Registers + * Loads the PCI configuration space base address registers, + * the expansion ROM base address, the latency timer, and etc. + * from the saved values in the device node. + */ +static inline void __restore_bars (struct pci_dn *pdn) +{ + int i; + + if (NULL==pdn->phb) return; + for (i=4; i<10; i++) { + rtas_write_config(pdn, i*4, 4, pdn->config_space[i]); + } + + /* 12 == Expansion ROM Address */ + rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]); + +#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) +#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)]) + + rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1, + SAVED_BYTE(PCI_CACHE_LINE_SIZE)); + + rtas_write_config (pdn, PCI_LATENCY_TIMER, 1, + SAVED_BYTE(PCI_LATENCY_TIMER)); + + /* max latency, min grant, interrupt pin and line */ + rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]); +} + +/** + * eeh_restore_bars - restore the PCI config space info + * + * This routine performs a recursive walk to the children + * of this device as well. + */ +void eeh_restore_bars(struct pci_dn *pdn) +{ + struct device_node *dn; + if (!pdn) + return; + + if (! pdn->eeh_is_bridge) + __restore_bars (pdn); + + dn = pdn->node->child; + while (dn) { + eeh_restore_bars (PCI_DN(dn)); + dn = dn->sibling; + } +} + +/** + * eeh_save_bars - save device bars + * + * Save the values of the device bars. Unlike the restore + * routine, this routine is *not* recursive. This is because + * PCI devices are added individuallly; but, for the restore, + * an entire slot is reset at a time. + */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn) +{ + int i; + + if (!pdev || !pdn ) + return; + + for (i = 0; i < 16; i++) + pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]); + + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pdn->eeh_is_bridge = 1; +} + +void +rtas_configure_bridge(struct pci_dn *pdn) +{ + int token = rtas_token ("ibm,configure-bridge"); + int rc; + + if (token == RTAS_UNKNOWN_SERVICE) + return; + rc = rtas_call(token,3,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid)); + if (rc) { + printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", + rc, pdn->node->full_name); + } +} + +/* ------------------------------------------------------------- */ +/* The code below deals with enabling EEH for devices during the + * early boot sequence. EEH must be enabled before any PCI probing + * can be done. + */ + +#define EEH_ENABLE 1 + struct eeh_early_enable_info { unsigned int buid_hi; unsigned int buid_lo; @@ -684,9 +924,11 @@ static void *early_enable_eeh(struct device_node *dn, void *data) u32 *device_id = (u32 *)get_property(dn, "device-id", NULL); u32 *regs; int enable; - struct pci_dn *pdn = dn->data; + struct pci_dn *pdn = PCI_DN(dn); pdn->eeh_mode = 0; + pdn->eeh_check_count = 0; + pdn->eeh_freeze_count = 0; if (status && strcmp(status, "ok") != 0) return NULL; /* ignore devices with bad status */ @@ -723,8 +965,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* First register entry is addr (00BBSS00) */ /* Try to enable eeh */ ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - regs[0], info->buid_hi, info->buid_lo, - EEH_ENABLE); + regs[0], info->buid_hi, info->buid_lo, + EEH_ENABLE); + if (ret == 0) { eeh_subsystem_enabled = 1; pdn->eeh_mode |= EEH_MODE_SUPPORTED; @@ -736,7 +979,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* This device doesn't support EEH, but it may have an * EEH parent, in which case we mark it as supported. */ - if (dn->parent && dn->parent->data + if (dn->parent && PCI_DN(dn->parent) && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { /* Parent supports EEH. */ pdn->eeh_mode |= EEH_MODE_SUPPORTED; @@ -749,7 +992,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) dn->full_name); } - return NULL; + return NULL; } /* @@ -770,6 +1013,9 @@ void __init eeh_init(void) struct device_node *phb, *np; struct eeh_early_enable_info info; + spin_lock_init(&confirm_error_lock); + spin_lock_init(&slot_errbuf_lock); + np = of_find_node_by_path("/rtas"); if (np == NULL) return; @@ -797,13 +1043,11 @@ void __init eeh_init(void) for (phb = of_find_node_by_name(NULL, "pci"); phb; phb = of_find_node_by_name(phb, "pci")) { unsigned long buid; - struct pci_dn *pci; buid = get_phb_buid(phb); - if (buid == 0 || phb->data == NULL) + if (buid == 0 || PCI_DN(phb) == NULL) continue; - pci = phb->data; info.buid_lo = BUID_LO(buid); info.buid_hi = BUID_HI(buid); traverse_pci_devices(phb, early_enable_eeh, &info); @@ -832,11 +1076,13 @@ void eeh_add_device_early(struct device_node *dn) struct pci_controller *phb; struct eeh_early_enable_info info; - if (!dn || !dn->data) + if (!dn || !PCI_DN(dn)) return; phb = PCI_DN(dn)->phb; if (NULL == phb || 0 == phb->buid) { - printk(KERN_WARNING "EEH: Expected buid but found none\n"); + printk(KERN_WARNING "EEH: Expected buid but found none for %s\n", + dn->full_name); + dump_stack(); return; } @@ -844,7 +1090,7 @@ void eeh_add_device_early(struct device_node *dn) info.buid_lo = BUID_LO(phb->buid); early_enable_eeh(dn, &info); } -EXPORT_SYMBOL(eeh_add_device_early); +EXPORT_SYMBOL_GPL(eeh_add_device_early); /** * eeh_add_device_late - perform EEH initialization for the indicated pci device @@ -855,6 +1101,9 @@ EXPORT_SYMBOL(eeh_add_device_early); */ void eeh_add_device_late(struct pci_dev *dev) { + struct device_node *dn; + struct pci_dn *pdn; + if (!dev || !eeh_subsystem_enabled) return; @@ -862,9 +1111,15 @@ void eeh_add_device_late(struct pci_dev *dev) printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev)); #endif + pci_dev_get (dev); + dn = pci_device_to_OF_node(dev); + pdn = PCI_DN(dn); + pdn->pcidev = dev; + pci_addr_cache_insert_device (dev); + eeh_save_bars(dev, pdn); } -EXPORT_SYMBOL(eeh_add_device_late); +EXPORT_SYMBOL_GPL(eeh_add_device_late); /** * eeh_remove_device - undo EEH setup for the indicated pci device @@ -875,6 +1130,7 @@ EXPORT_SYMBOL(eeh_add_device_late); */ void eeh_remove_device(struct pci_dev *dev) { + struct device_node *dn; if (!dev || !eeh_subsystem_enabled) return; @@ -883,20 +1139,29 @@ void eeh_remove_device(struct pci_dev *dev) printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev)); #endif pci_addr_cache_remove_device(dev); + + dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->pcidev = NULL; + pci_dev_put (dev); } -EXPORT_SYMBOL(eeh_remove_device); +EXPORT_SYMBOL_GPL(eeh_remove_device); static int proc_eeh_show(struct seq_file *m, void *v) { unsigned int cpu; unsigned long ffs = 0, positives = 0, failures = 0; unsigned long resets = 0; + unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0; for_each_cpu(cpu) { ffs += per_cpu(total_mmio_ffs, cpu); positives += per_cpu(false_positives, cpu); failures += per_cpu(ignored_failures, cpu); resets += per_cpu(slot_resets, cpu); + no_dev += per_cpu(no_device, cpu); + no_dn += per_cpu(no_dn, cpu); + no_cfg += per_cpu(no_cfg_addr, cpu); + no_check += per_cpu(ignored_check, cpu); } if (0 == eeh_subsystem_enabled) { @@ -904,13 +1169,17 @@ static int proc_eeh_show(struct seq_file *m, void *v) seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs); } else { seq_printf(m, "EEH Subsystem is enabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n" - "eeh_false_positives=%ld\n" - "eeh_ignored_failures=%ld\n" - "eeh_slot_resets=%ld\n" - "eeh_fail_count=%d\n", - ffs, positives, failures, resets, - eeh_fail_count.counter); + seq_printf(m, + "no device=%ld\n" + "no device node=%ld\n" + "no config address=%ld\n" + "check not wanted=%ld\n" + "eeh_total_mmio_ffs=%ld\n" + "eeh_false_positives=%ld\n" + "eeh_ignored_failures=%ld\n" + "eeh_slot_resets=%ld\n", + no_dev, no_dn, no_cfg, no_check, + ffs, positives, failures, resets); } return 0; @@ -932,7 +1201,7 @@ static int __init eeh_init_proc(void) { struct proc_dir_entry *e; - if (systemcfg->platform & PLATFORM_PSERIES) { + if (platform_is_pseries()) { e = create_proc_entry("ppc64/eeh", 0, NULL); if (e) e->proc_fops = &proc_eeh_operations; diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c new file mode 100644 index 000000000000..92497333c2b6 --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -0,0 +1,155 @@ +/* + * eeh_event.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (c) 2005 Linas Vepstas <linas@linas.org> + */ + +#include <linux/list.h> +#include <linux/pci.h> +#include <asm/eeh_event.h> + +/** Overview: + * EEH error states may be detected within exception handlers; + * however, the recovery processing needs to occur asynchronously + * in a normal kernel context and not an interrupt context. + * This pair of routines creates an event and queues it onto a + * work-queue, where a worker thread can drive recovery. + */ + +/* EEH event workqueue setup. */ +static spinlock_t eeh_eventlist_lock = SPIN_LOCK_UNLOCKED; +LIST_HEAD(eeh_eventlist); +static void eeh_thread_launcher(void *); +DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL); + +/** + * eeh_panic - call panic() for an eeh event that cannot be handled. + * The philosophy of this routine is that it is better to panic and + * halt the OS than it is to risk possible data corruption by + * oblivious device drivers that don't know better. + * + * @dev pci device that had an eeh event + * @reset_state current reset state of the device slot + */ +static void eeh_panic(struct pci_dev *dev, int reset_state) +{ + /* + * Since the panic_on_oops sysctl is used to halt the system + * in light of potential corruption, we can use it here. + */ + if (panic_on_oops) { + panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, + pci_name(dev)); + } + else { + printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", + reset_state, pci_name(dev)); + } +} + +/** + * eeh_event_handler - dispatch EEH events. The detection of a frozen + * slot can occur inside an interrupt, where it can be hard to do + * anything about it. The goal of this routine is to pull these + * detection events out of the context of the interrupt handler, and + * re-dispatch them for processing at a later time in a normal context. + * + * @dummy - unused + */ +static int eeh_event_handler(void * dummy) +{ + unsigned long flags; + struct eeh_event *event; + + daemonize ("eehd"); + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&eeh_eventlist_lock, flags); + event = NULL; + if (!list_empty(&eeh_eventlist)) { + event = list_entry(eeh_eventlist.next, struct eeh_event, list); + list_del(&event->list); + } + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + if (event == NULL) + break; + + printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", + pci_name(event->dev)); + + eeh_panic (event->dev, event->state); + + kfree(event); + } + + return 0; +} + +/** + * eeh_thread_launcher + * + * @dummy - unused + */ +static void eeh_thread_launcher(void *dummy) +{ + if (kernel_thread(eeh_event_handler, NULL, CLONE_KERNEL) < 0) + printk(KERN_ERR "Failed to start EEH daemon\n"); +} + +/** + * eeh_send_failure_event - generate a PCI error event + * @dev pci device + * + * This routine can be called within an interrupt context; + * the actual event will be delivered in a normal context + * (from a workqueue). + */ +int eeh_send_failure_event (struct device_node *dn, + struct pci_dev *dev, + int state, + int time_unavail) +{ + unsigned long flags; + struct eeh_event *event; + + event = kmalloc(sizeof(*event), GFP_ATOMIC); + if (event == NULL) { + printk (KERN_ERR "EEH: out of memory, event not handled\n"); + return 1; + } + + if (dev) + pci_dev_get(dev); + + event->dn = dn; + event->dev = dev; + event->state = state; + event->time_unavail = time_unavail; + + /* We may or may not be called in an interrupt context */ + spin_lock_irqsave(&eeh_eventlist_lock, flags); + list_add(&event->list, &eeh_eventlist); + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + + schedule_work(&eeh_event_wq); + + return 0; +} + +/********************** END OF FILE ******************************/ diff --git a/arch/ppc64/kernel/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c index 138e128a3886..138e128a3886 100644 --- a/arch/ppc64/kernel/hvconsole.c +++ b/arch/powerpc/platforms/pseries/hvconsole.c diff --git a/arch/ppc64/kernel/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c index 4d584172055a..4d584172055a 100644 --- a/arch/ppc64/kernel/hvcserver.c +++ b/arch/powerpc/platforms/pseries/hvcserver.c diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 513e27231493..97ba5214417f 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -37,16 +37,15 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/rtas.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/pci-bridge.h> #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/pSeries_reconfig.h> -#include <asm/systemcfg.h> #include <asm/firmware.h> #include <asm/tce.h> #include <asm/ppc-pci.h> +#include <asm/udbg.h> #include "plpar_wrappers.h" @@ -582,7 +581,7 @@ void iommu_init_early_pSeries(void) return; } - if (systemcfg->platform & PLATFORM_LPAR) { + if (platform_is_lpar()) { if (firmware_has_feature(FW_FEATURE_MULTITCE)) { ppc_md.tce_build = tce_buildmulti_pSeriesLP; ppc_md.tce_free = tce_freemulti_pSeriesLP; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index ab0c6dd6ec94..a50e5f3f396d 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -31,13 +31,14 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/mmu_context.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/tlbflush.h> #include <asm/tlb.h> #include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/cputable.h> +#include <asm/udbg.h> +#include <asm/smp.h> #include "plpar_wrappers.h" diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index c198656a3bb5..999a9620b5ce 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -107,7 +107,6 @@ static void __init pSeries_request_regions(void) void __init pSeries_final_fixup(void) { - phbs_remap_io(); pSeries_request_regions(); pci_addr_cache_build(); @@ -123,7 +122,7 @@ static void fixup_winbond_82c105(struct pci_dev* dev) int i; unsigned int reg; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!platform_is_pseries()) return; printk("Using INTC for W82c105 IDE controller.\n"); diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index 382f8c5b0e7c..3bd1b3e06003 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -107,14 +107,4 @@ static inline long plpar_put_term_char(unsigned long termno, unsigned long len, lbuf[1]); } -static inline long plpar_set_xdabr(unsigned long address, unsigned long flags) -{ - return plpar_hcall_norets(H_SET_XDABR, address, flags); -} - -static inline long plpar_set_dabr(unsigned long val) -{ - return plpar_hcall_norets(H_SET_DABR, val); -} - #endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 6562ff4b0a82..fbd214d68b07 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -48,7 +48,7 @@ #include <asm/ptrace.h> #include <asm/machdep.h> #include <asm/rtas.h> -#include <asm/ppcdebug.h> +#include <asm/udbg.h> static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 58c61219d08e..d8864164dbe8 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -286,10 +286,8 @@ static struct property *new_property(const char *name, const int length, return new; cleanup: - if (new->name) - kfree(new->name); - if (new->value) - kfree(new->value); + kfree(new->name); + kfree(new->value); kfree(new); return NULL; } @@ -410,7 +408,7 @@ static int proc_ppc64_create_ofdt(void) { struct proc_dir_entry *ent; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!platform_is_pseries()) return 0; ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL); diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index e26b0420b6dd..a6f628d4c9dc 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -27,7 +27,6 @@ #include <asm/prom.h> #include <asm/nvram.h> #include <asm/atomic.h> -#include <asm/systemcfg.h> #if 0 #define DEBUG(A...) printk(KERN_ERR A) @@ -482,10 +481,12 @@ static int __init rtas_init(void) { struct proc_dir_entry *entry; - /* No RTAS, only warn if we are on a pSeries box */ + if (!platform_is_pseries()) + return 0; + + /* No RTAS */ if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { - if (systemcfg->platform & PLATFORM_PSERIES) - printk(KERN_INFO "rtasd: no event-scan on system\n"); + printk(KERN_INFO "rtasd: no event-scan on system\n"); return 1; } diff --git a/arch/ppc64/kernel/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c index 215bf8900304..2edc947f7c44 100644 --- a/arch/ppc64/kernel/scanlog.c +++ b/arch/powerpc/platforms/pseries/scanlog.c @@ -225,8 +225,7 @@ int __init scanlog_init(void) void __exit scanlog_cleanup(void) { if (proc_ppc64_scan_log_dump) { - if (proc_ppc64_scan_log_dump->data) - kfree(proc_ppc64_scan_log_dump->data); + kfree(proc_ppc64_scan_log_dump->data); remove_proc_entry("scan-log-dump", proc_ppc64_scan_log_dump->parent); } } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 65bee939eecc..b9d9732b2e06 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,6 +65,7 @@ #include <asm/ppc-pci.h> #include <asm/i8259.h> #include <asm/udbg.h> +#include <asm/smp.h> #include "plpar_wrappers.h" @@ -199,14 +200,12 @@ static void __init pSeries_setup_arch(void) if (ppc64_interrupt_controller == IC_OPEN_PIC) { ppc_md.init_IRQ = pSeries_init_mpic; ppc_md.get_irq = mpic_get_irq; - ppc_md.cpu_irq_down = mpic_teardown_this_cpu; /* Allocate the mpic now, so that find_and_init_phbs() can * fill the ISUs */ pSeries_setup_mpic(); } else { ppc_md.init_IRQ = xics_init_IRQ; ppc_md.get_irq = xics_get_irq; - ppc_md.cpu_irq_down = xics_teardown_cpu; } #ifdef CONFIG_SMP @@ -248,7 +247,7 @@ static void __init pSeries_setup_arch(void) ppc_md.idle_loop = default_idle; } - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; else ppc_md.enable_pmcs = power4_enable_pmcs; @@ -305,9 +304,7 @@ static void __init fw_feature_init(void) } of_node_put(dn); - no_rtas: - printk(KERN_INFO "firmware_features = 0x%lx\n", - ppc64_firmware_features); +no_rtas: DBG(" <- fw_feature_init()\n"); } @@ -353,14 +350,15 @@ static void pSeries_mach_cpu_die(void) static int pseries_set_dabr(unsigned long dabr) { - if (firmware_has_feature(FW_FEATURE_XDABR)) { - /* We want to catch accesses from kernel and userspace */ - return plpar_set_xdabr(dabr, H_DABRX_KERNEL | H_DABRX_USER); - } - - return plpar_set_dabr(dabr); + return plpar_hcall_norets(H_SET_DABR, dabr); } +static int pseries_set_xdabr(unsigned long dabr) +{ + /* We want to catch accesses from kernel and userspace */ + return plpar_hcall_norets(H_SET_XDABR, dabr, + H_DABRX_KERNEL | H_DABRX_USER); +} /* * Early initialization. Relocation is on but do not reference unbolted pages @@ -376,7 +374,7 @@ static void __init pSeries_init_early(void) fw_feature_init(); - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) hpte_init_lpar(); else { hpte_init_native(); @@ -386,7 +384,7 @@ static void __init pSeries_init_early(void) generic_find_legacy_serial_ports(&physport, &default_speed); - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) find_udbg_vterm(); else if (physport) { /* Map the uart for udbg. */ @@ -396,8 +394,10 @@ static void __init pSeries_init_early(void) DBG("Hello World !\n"); } - if (firmware_has_feature(FW_FEATURE_XDABR | FW_FEATURE_DABR)) + if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; + else if (firmware_has_feature(FW_FEATURE_XDABR)) + ppc_md.set_dabr = pseries_set_xdabr; iommu_init_early_pSeries(); @@ -465,6 +465,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu) * more. */ clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); /* * SMT dynamic mode. Cede will result in this thread going @@ -477,6 +478,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu) cede_processor(); else local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); } else { /* * Give the HV an opportunity at the processor, since we are @@ -488,11 +490,11 @@ static inline void dedicated_idle_sleep(unsigned int cpu) static void pseries_dedicated_idle(void) { - long oldval; struct paca_struct *lpaca = get_paca(); unsigned int cpu = smp_processor_id(); unsigned long start_snooze; unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { /* @@ -501,10 +503,7 @@ static void pseries_dedicated_idle(void) */ lpaca->lppaca.idle = 1; - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { start_snooze = __get_tb() + *smt_snooze_delay * tb_ticks_per_usec; @@ -527,15 +526,14 @@ static void pseries_dedicated_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } lpaca->lppaca.idle = 0; ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); @@ -579,7 +577,9 @@ static void pseries_shared_idle(void) lpaca->lppaca.idle = 0; ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); @@ -588,11 +588,32 @@ static void pseries_shared_idle(void) static int pSeries_pci_probe_mode(struct pci_bus *bus) { - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) return PCI_PROBE_DEVTREE; return PCI_PROBE_NORMAL; } +#ifdef CONFIG_KEXEC +static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (!crash_shutdown) { + unsigned long vpa = __pa(&get_paca()->lppaca); + + if (unregister_vpa(hard_smp_processor_id(), vpa)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } + } + + if (ppc64_interrupt_controller == IC_OPEN_PIC) + mpic_teardown_this_cpu(secondary); + else + xics_teardown_cpu(secondary); +} +#endif + struct machdep_calls __initdata pSeries_md = { .probe = pSeries_probe, .setup_arch = pSeries_setup_arch, @@ -615,4 +636,7 @@ struct machdep_calls __initdata pSeries_md = { .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, +#ifdef CONFIG_KEXEC + .kexec_cpu_down = pseries_kexec_cpu_down, +#endif }; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 7a243e8ccd7e..25181c594d73 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -46,10 +46,12 @@ #include <asm/rtas.h> #include <asm/pSeries_reconfig.h> #include <asm/mpic.h> +#include <asm/vdso_datapage.h> #include "plpar_wrappers.h" #ifdef DEBUG +#include <asm/udbg.h> #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) @@ -96,7 +98,7 @@ int pSeries_cpu_disable(void) int cpu = smp_processor_id(); cpu_clear(cpu, cpu_online_map); - systemcfg->processorCount--; + vdso_data->processorCount--; /*fix boot_cpuid here*/ if (cpu == boot_cpuid) @@ -441,7 +443,7 @@ void __init smp_init_pSeries(void) smp_ops->cpu_die = pSeries_cpu_die; /* Processors can be added/removed only on LPAR */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + if (platform_is_lpar()) pSeries_reconfig_notifier_register(&pSeries_smp_nb); #endif diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index c72c86f05cb6..72ac18067ece 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -545,7 +545,9 @@ nextnode: of_node_put(np); } - if (systemcfg->platform == PLATFORM_PSERIES) { + if (platform_is_lpar()) + ops = &pSeriesLP_ops; + else { #ifdef CONFIG_SMP for_each_cpu(i) { int hard_id; @@ -561,12 +563,11 @@ nextnode: #else xics_per_cpu[0] = ioremap(intr_base, intr_size); #endif /* CONFIG_SMP */ - } else if (systemcfg->platform == PLATFORM_PSERIES_LPAR) { - ops = &pSeriesLP_ops; } xics_8259_pic.enable = i8259_pic.enable; xics_8259_pic.disable = i8259_pic.disable; + xics_8259_pic.end = i8259_pic.end; for (i = 0; i < 16; ++i) get_irq_desc(i)->handler = &xics_8259_pic; for (; i < NR_IRQS; ++i) diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 90bce6e0c191..b7ac32fdd776 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -207,6 +207,9 @@ void __init i8259_init(unsigned long intack_addr, int offset) spin_unlock_irqrestore(&i8259_lock, flags); + for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) + irq_desc[offset + i].handler = &i8259_pic; + /* reserve our resources */ setup_irq(offset + 2, &i8259_irqaction); request_resource(&ioport_resource, &pic1_iores); @@ -216,6 +219,4 @@ void __init i8259_init(unsigned long intack_addr, int offset) if (intack_addr != 0) pci_intack = ioremap(intack_addr, 1); - for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) - irq_desc[offset + i].handler = &i8259_pic; } diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c index 607722178c1a..f32baf7f4693 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/u3_iommu.c @@ -37,7 +37,6 @@ #include <linux/vmalloc.h> #include <asm/io.h> #include <asm/prom.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/pci-bridge.h> #include <asm/machdep.h> @@ -227,7 +226,7 @@ static void iommu_table_u3_setup(void) iommu_table_u3.it_busno = 0; iommu_table_u3.it_offset = 0; /* it_size is in number of entries */ - iommu_table_u3.it_size = dart_tablesize / sizeof(u32); + iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR; /* Initialize the common IOMMU code */ iommu_table_u3.it_base = (unsigned long)dart_vbase; diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 79a784f0e7a9..b20312e5ed27 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -8,4 +8,4 @@ obj-$(CONFIG_8xx) += start_8xx.o obj-$(CONFIG_6xx) += start_32.o obj-$(CONFIG_4xx) += start_32.o obj-$(CONFIG_PPC64) += start_64.o -obj-y += xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o +obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c new file mode 100644 index 000000000000..78765833f4c0 --- /dev/null +++ b/arch/powerpc/xmon/nonstdio.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/string.h> +#include <asm/time.h> +#include "nonstdio.h" + +int xmon_putchar(int c) +{ + char ch = c; + + if (c == '\n') + xmon_putchar('\r'); + return xmon_write(&ch, 1) == 1? c: -1; +} + +static char line[256]; +static char *lineptr; +static int lineleft; + +int xmon_expect(const char *str, unsigned long timeout) +{ + int c; + unsigned long t0; + + /* assume 25MHz default timebase if tb_ticks_per_sec not set yet */ + timeout *= tb_ticks_per_sec? tb_ticks_per_sec: 25000000; + t0 = get_tbl(); + do { + lineptr = line; + for (;;) { + c = xmon_read_poll(); + if (c == -1) { + if (get_tbl() - t0 > timeout) + return 0; + continue; + } + if (c == '\n') + break; + if (c != '\r' && lineptr < &line[sizeof(line) - 1]) + *lineptr++ = c; + } + *lineptr = 0; + } while (strstr(line, str) == NULL); + return 1; +} + +int xmon_getchar(void) +{ + int c; + + if (lineleft == 0) { + lineptr = line; + for (;;) { + c = xmon_readchar(); + if (c == -1 || c == 4) + break; + if (c == '\r' || c == '\n') { + *lineptr++ = '\n'; + xmon_putchar('\n'); + break; + } + switch (c) { + case 0177: + case '\b': + if (lineptr > line) { + xmon_putchar('\b'); + xmon_putchar(' '); + xmon_putchar('\b'); + --lineptr; + } + break; + case 'U' & 0x1F: + while (lineptr > line) { + xmon_putchar('\b'); + xmon_putchar(' '); + xmon_putchar('\b'); + --lineptr; + } + break; + default: + if (lineptr >= &line[sizeof(line) - 1]) + xmon_putchar('\a'); + else { + xmon_putchar(c); + *lineptr++ = c; + } + } + } + lineleft = lineptr - line; + lineptr = line; + } + if (lineleft == 0) + return -1; + --lineleft; + return *lineptr++; +} + +char *xmon_gets(char *str, int nb) +{ + char *p; + int c; + + for (p = str; p < str + nb - 1; ) { + c = xmon_getchar(); + if (c == -1) { + if (p == str) + return NULL; + break; + } + *p++ = c; + if (c == '\n') + break; + } + *p = 0; + return str; +} + +void xmon_printf(const char *format, ...) +{ + va_list args; + int n; + static char xmon_outbuf[1024]; + + va_start(args, format); + n = vsnprintf(xmon_outbuf, sizeof(xmon_outbuf), format, args); + va_end(args); + xmon_write(xmon_outbuf, n); +} diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h index 84211a21c6f4..47cebbd2b1b1 100644 --- a/arch/powerpc/xmon/nonstdio.h +++ b/arch/powerpc/xmon/nonstdio.h @@ -1,22 +1,14 @@ -typedef int FILE; -extern FILE *xmon_stdin, *xmon_stdout; #define EOF (-1) -#define stdin xmon_stdin -#define stdout xmon_stdout + #define printf xmon_printf -#define fprintf xmon_fprintf -#define fputs xmon_fputs -#define fgets xmon_fgets #define putchar xmon_putchar -#define getchar xmon_getchar -#define putc xmon_putc -#define getc xmon_getc -#define fopen(n, m) NULL -#define fflush(f) do {} while (0) -#define fclose(f) do {} while (0) -extern char *fgets(char *, int, void *); -extern void xmon_printf(const char *, ...); -extern void xmon_fprintf(void *, const char *, ...); -extern void xmon_sprintf(char *, const char *, ...); -#define perror(s) printf("%s: no files!\n", (s)) +extern int xmon_putchar(int c); +extern int xmon_getchar(void); +extern char *xmon_gets(char *, int); +extern void xmon_printf(const char *, ...); +extern void xmon_map_scc(void); +extern int xmon_expect(const char *str, unsigned long timeout); +extern int xmon_write(void *ptr, int nb); +extern int xmon_readchar(void); +extern int xmon_read_poll(void); diff --git a/arch/powerpc/xmon/setjmp.S b/arch/powerpc/xmon/setjmp.S index f8e40dfd2bff..96a91f10e2ec 100644 --- a/arch/powerpc/xmon/setjmp.S +++ b/arch/powerpc/xmon/setjmp.S @@ -14,61 +14,61 @@ _GLOBAL(xmon_setjmp) mflr r0 - STL r0,0(r3) - STL r1,SZL(r3) - STL r2,2*SZL(r3) + PPC_STL r0,0(r3) + PPC_STL r1,SZL(r3) + PPC_STL r2,2*SZL(r3) mfcr r0 - STL r0,3*SZL(r3) - STL r13,4*SZL(r3) - STL r14,5*SZL(r3) - STL r15,6*SZL(r3) - STL r16,7*SZL(r3) - STL r17,8*SZL(r3) - STL r18,9*SZL(r3) - STL r19,10*SZL(r3) - STL r20,11*SZL(r3) - STL r21,12*SZL(r3) - STL r22,13*SZL(r3) - STL r23,14*SZL(r3) - STL r24,15*SZL(r3) - STL r25,16*SZL(r3) - STL r26,17*SZL(r3) - STL r27,18*SZL(r3) - STL r28,19*SZL(r3) - STL r29,20*SZL(r3) - STL r30,21*SZL(r3) - STL r31,22*SZL(r3) + PPC_STL r0,3*SZL(r3) + PPC_STL r13,4*SZL(r3) + PPC_STL r14,5*SZL(r3) + PPC_STL r15,6*SZL(r3) + PPC_STL r16,7*SZL(r3) + PPC_STL r17,8*SZL(r3) + PPC_STL r18,9*SZL(r3) + PPC_STL r19,10*SZL(r3) + PPC_STL r20,11*SZL(r3) + PPC_STL r21,12*SZL(r3) + PPC_STL r22,13*SZL(r3) + PPC_STL r23,14*SZL(r3) + PPC_STL r24,15*SZL(r3) + PPC_STL r25,16*SZL(r3) + PPC_STL r26,17*SZL(r3) + PPC_STL r27,18*SZL(r3) + PPC_STL r28,19*SZL(r3) + PPC_STL r29,20*SZL(r3) + PPC_STL r30,21*SZL(r3) + PPC_STL r31,22*SZL(r3) li r3,0 blr _GLOBAL(xmon_longjmp) - CMPI r4,0 + PPC_LCMPI r4,0 bne 1f li r4,1 -1: LDL r13,4*SZL(r3) - LDL r14,5*SZL(r3) - LDL r15,6*SZL(r3) - LDL r16,7*SZL(r3) - LDL r17,8*SZL(r3) - LDL r18,9*SZL(r3) - LDL r19,10*SZL(r3) - LDL r20,11*SZL(r3) - LDL r21,12*SZL(r3) - LDL r22,13*SZL(r3) - LDL r23,14*SZL(r3) - LDL r24,15*SZL(r3) - LDL r25,16*SZL(r3) - LDL r26,17*SZL(r3) - LDL r27,18*SZL(r3) - LDL r28,19*SZL(r3) - LDL r29,20*SZL(r3) - LDL r30,21*SZL(r3) - LDL r31,22*SZL(r3) - LDL r0,3*SZL(r3) +1: PPC_LL r13,4*SZL(r3) + PPC_LL r14,5*SZL(r3) + PPC_LL r15,6*SZL(r3) + PPC_LL r16,7*SZL(r3) + PPC_LL r17,8*SZL(r3) + PPC_LL r18,9*SZL(r3) + PPC_LL r19,10*SZL(r3) + PPC_LL r20,11*SZL(r3) + PPC_LL r21,12*SZL(r3) + PPC_LL r22,13*SZL(r3) + PPC_LL r23,14*SZL(r3) + PPC_LL r24,15*SZL(r3) + PPC_LL r25,16*SZL(r3) + PPC_LL r26,17*SZL(r3) + PPC_LL r27,18*SZL(r3) + PPC_LL r28,19*SZL(r3) + PPC_LL r29,20*SZL(r3) + PPC_LL r30,21*SZL(r3) + PPC_LL r31,22*SZL(r3) + PPC_LL r0,3*SZL(r3) mtcrf 0x38,r0 - LDL r0,0(r3) - LDL r1,SZL(r3) - LDL r2,2*SZL(r3) + PPC_LL r0,0(r3) + PPC_LL r1,SZL(r3) + PPC_LL r2,2*SZL(r3) mtlr r0 mr r3,r4 blr @@ -84,52 +84,52 @@ _GLOBAL(xmon_longjmp) * different ABIs, though). */ _GLOBAL(xmon_save_regs) - STL r0,0*SZL(r3) - STL r2,2*SZL(r3) - STL r3,3*SZL(r3) - STL r4,4*SZL(r3) - STL r5,5*SZL(r3) - STL r6,6*SZL(r3) - STL r7,7*SZL(r3) - STL r8,8*SZL(r3) - STL r9,9*SZL(r3) - STL r10,10*SZL(r3) - STL r11,11*SZL(r3) - STL r12,12*SZL(r3) - STL r13,13*SZL(r3) - STL r14,14*SZL(r3) - STL r15,15*SZL(r3) - STL r16,16*SZL(r3) - STL r17,17*SZL(r3) - STL r18,18*SZL(r3) - STL r19,19*SZL(r3) - STL r20,20*SZL(r3) - STL r21,21*SZL(r3) - STL r22,22*SZL(r3) - STL r23,23*SZL(r3) - STL r24,24*SZL(r3) - STL r25,25*SZL(r3) - STL r26,26*SZL(r3) - STL r27,27*SZL(r3) - STL r28,28*SZL(r3) - STL r29,29*SZL(r3) - STL r30,30*SZL(r3) - STL r31,31*SZL(r3) + PPC_STL r0,0*SZL(r3) + PPC_STL r2,2*SZL(r3) + PPC_STL r3,3*SZL(r3) + PPC_STL r4,4*SZL(r3) + PPC_STL r5,5*SZL(r3) + PPC_STL r6,6*SZL(r3) + PPC_STL r7,7*SZL(r3) + PPC_STL r8,8*SZL(r3) + PPC_STL r9,9*SZL(r3) + PPC_STL r10,10*SZL(r3) + PPC_STL r11,11*SZL(r3) + PPC_STL r12,12*SZL(r3) + PPC_STL r13,13*SZL(r3) + PPC_STL r14,14*SZL(r3) + PPC_STL r15,15*SZL(r3) + PPC_STL r16,16*SZL(r3) + PPC_STL r17,17*SZL(r3) + PPC_STL r18,18*SZL(r3) + PPC_STL r19,19*SZL(r3) + PPC_STL r20,20*SZL(r3) + PPC_STL r21,21*SZL(r3) + PPC_STL r22,22*SZL(r3) + PPC_STL r23,23*SZL(r3) + PPC_STL r24,24*SZL(r3) + PPC_STL r25,25*SZL(r3) + PPC_STL r26,26*SZL(r3) + PPC_STL r27,27*SZL(r3) + PPC_STL r28,28*SZL(r3) + PPC_STL r29,29*SZL(r3) + PPC_STL r30,30*SZL(r3) + PPC_STL r31,31*SZL(r3) /* go up one stack frame for SP */ - LDL r4,0(r1) - STL r4,1*SZL(r3) + PPC_LL r4,0(r1) + PPC_STL r4,1*SZL(r3) /* get caller's LR */ - LDL r0,LRSAVE(r4) - STL r0,_NIP-STACK_FRAME_OVERHEAD(r3) - STL r0,_LINK-STACK_FRAME_OVERHEAD(r3) + PPC_LL r0,LRSAVE(r4) + PPC_STL r0,_NIP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_LINK-STACK_FRAME_OVERHEAD(r3) mfmsr r0 - STL r0,_MSR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_MSR-STACK_FRAME_OVERHEAD(r3) mfctr r0 - STL r0,_CTR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_CTR-STACK_FRAME_OVERHEAD(r3) mfxer r0 - STL r0,_XER-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_XER-STACK_FRAME_OVERHEAD(r3) mfcr r0 - STL r0,_CCR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_CCR-STACK_FRAME_OVERHEAD(r3) li r0,0 - STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3) blr diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c index 69b658c0f760..c2464df4217e 100644 --- a/arch/powerpc/xmon/start_32.c +++ b/arch/powerpc/xmon/start_32.c @@ -11,7 +11,6 @@ #include <linux/cuda.h> #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/sysrq.h> #include <linux/bitops.h> #include <asm/xmon.h> #include <asm/prom.h> @@ -22,10 +21,11 @@ #include <asm/processor.h> #include <asm/delay.h> #include <asm/btext.h> +#include <asm/time.h> +#include "nonstdio.h" static volatile unsigned char __iomem *sccc, *sccd; unsigned int TXRDY, RXRDY, DLAB; -static int xmon_expect(const char *str, unsigned int timeout); static int use_serial; static int use_screen; @@ -33,16 +33,6 @@ static int via_modem; static int xmon_use_sccb; static struct device_node *channel_node; -#define TB_SPEED 25000000 - -static inline unsigned int readtb(void) -{ - unsigned int ret; - - asm volatile("mftb %0" : "=r" (ret) :); - return ret; -} - void buf_access(void) { if (DLAB) @@ -91,23 +81,7 @@ static unsigned long chrp_find_phys_io_base(void) } #endif /* CONFIG_PPC_CHRP */ -#ifdef CONFIG_MAGIC_SYSRQ -static void sysrq_handle_xmon(int key, struct pt_regs *regs, - struct tty_struct *tty) -{ - xmon(regs); -} - -static struct sysrq_key_op sysrq_xmon_op = -{ - .handler = sysrq_handle_xmon, - .help_msg = "Xmon", - .action_msg = "Entering xmon", -}; -#endif - -void -xmon_map_scc(void) +void xmon_map_scc(void) { #ifdef CONFIG_PPC_MULTIPLATFORM volatile unsigned char __iomem *base; @@ -217,8 +191,6 @@ xmon_map_scc(void) RXRDY = 1; DLAB = 0x80; #endif /* platform */ - - register_sysrq_key('x', &sysrq_xmon_op); } static int scc_initialized = 0; @@ -238,8 +210,7 @@ static inline void do_poll_adb(void) #endif /* CONFIG_ADB_CUDA */ } -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { char *p = ptr; int i, c, ct; @@ -311,8 +282,7 @@ static unsigned char xmon_shift_keytab[128] = "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ -static int -xmon_get_adb_key(void) +static int xmon_get_adb_key(void) { int k, t, on; @@ -350,32 +320,21 @@ xmon_get_adb_key(void) } #endif /* CONFIG_BOOTX_TEXT */ -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - char *p = ptr; - int i; - #ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - for (i = 0; i < nb; ++i) - *p++ = xmon_get_adb_key(); - return i; - } + if (use_screen) + return xmon_get_adb_key(); #endif - if (!scc_initialized) - xmon_init_scc(); - for (i = 0; i < nb; ++i) { + if (!scc_initialized) + xmon_init_scc(); while ((*sccc & RXRDY) == 0) - do_poll_adb(); + do_poll_adb(); buf_access(); - *p++ = *sccd; - } - return i; + return *sccd; } -int -xmon_read_poll(void) +int xmon_read_poll(void) { if ((*sccc & RXRDY) == 0) { do_poll_adb(); @@ -395,8 +354,7 @@ static unsigned char scc_inittab[] = { 3, 0xc1, /* rx enable, 8 bits */ }; -void -xmon_init_scc(void) +void xmon_init_scc(void) { if ( _machine == _MACH_chrp ) { @@ -410,6 +368,7 @@ xmon_init_scc(void) else if ( _machine == _MACH_Pmac ) { int i, x; + unsigned long timeout; if (channel_node != 0) pmac_call_feature( @@ -424,8 +383,12 @@ xmon_init_scc(void) PMAC_FTR_MODEM_ENABLE, channel_node, 0, 1); printk(KERN_INFO "Modem powered up by debugger !\n"); - t0 = readtb(); - while (readtb() - t0 < 3*TB_SPEED) + t0 = get_tbl(); + timeout = 3 * tb_ticks_per_sec; + if (timeout == 0) + /* assume 25MHz if tb_ticks_per_sec not set */ + timeout = 75000000; + while (get_tbl() - t0 < timeout) eieio(); } /* use the B channel if requested */ @@ -447,164 +410,19 @@ xmon_init_scc(void) scc_initialized = 1; if (via_modem) { for (;;) { - xmon_write(NULL, "ATE1V1\r", 7); + xmon_write("ATE1V1\r", 7); if (xmon_expect("OK", 5)) { - xmon_write(NULL, "ATA\r", 4); + xmon_write("ATA\r", 4); if (xmon_expect("CONNECT", 40)) break; } - xmon_write(NULL, "+++", 3); + xmon_write("+++", 3); xmon_expect("OK", 3); } } } -void *xmon_stdin; -void *xmon_stdout; -void *xmon_stderr; - -int xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int xmon_expect(const char *str, unsigned int timeout) -{ - int c; - unsigned int t0; - - timeout *= TB_SPEED; - t0 = readtb(); - do { - lineptr = line; - for (;;) { - c = xmon_read_poll(); - if (c == -1) { - if (readtb() - t0 > timeout) - return 0; - continue; - } - if (c == '\n') - break; - if (c != '\r' && lineptr < &line[sizeof(line) - 1]) - *lineptr++ = c; - } - *lineptr = 0; - } while (strstr(line, str) == NULL); - return 1; -} - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return NULL; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} - -void -xmon_enter(void) +void xmon_enter(void) { #ifdef CONFIG_ADB_PMU if (_machine == _MACH_Pmac) { @@ -613,8 +431,7 @@ xmon_enter(void) #endif } -void -xmon_leave(void) +void xmon_leave(void) { #ifdef CONFIG_ADB_PMU if (_machine == _MACH_Pmac) { diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start_64.c index e50c158191e1..712552c4f242 100644 --- a/arch/powerpc/xmon/start_64.c +++ b/arch/powerpc/xmon/start_64.c @@ -6,182 +6,29 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include <linux/config.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/sysrq.h> -#include <linux/init.h> #include <asm/machdep.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/prom.h> -#include <asm/processor.h> #include <asm/udbg.h> -#include <asm/system.h> #include "nonstdio.h" -#ifdef CONFIG_MAGIC_SYSRQ - -static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, - struct tty_struct *tty) -{ - /* ensure xmon is enabled */ - xmon_init(1); - debugger(pt_regs); -} - -static struct sysrq_key_op sysrq_xmon_op = +void xmon_map_scc(void) { - .handler = sysrq_handle_xmon, - .help_msg = "Xmon", - .action_msg = "Entering xmon", -}; - -static int __init setup_xmon_sysrq(void) -{ - register_sysrq_key('x', &sysrq_xmon_op); - return 0; } -__initcall(setup_xmon_sysrq); -#endif /* CONFIG_MAGIC_SYSRQ */ -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { return udbg_write(ptr, nb); } -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - return udbg_read(ptr, nb); + if (udbg_getc) + return udbg_getc(); + return -1; } -int -xmon_read_poll(void) +int xmon_read_poll(void) { if (udbg_getc_poll) return udbg_getc_poll(); return -1; } - -FILE *xmon_stdin; -FILE *xmon_stdout; - -int -xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int -xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int -xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return NULL; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c index a48bd594cf61..4c17b0486ad5 100644 --- a/arch/powerpc/xmon/start_8xx.c +++ b/arch/powerpc/xmon/start_8xx.c @@ -15,273 +15,30 @@ #include <asm/8xx_immap.h> #include <asm/mpc8xx.h> #include <asm/commproc.h> +#include "nonstdio.h" -extern void xmon_printf(const char *fmt, ...); extern int xmon_8xx_write(char *str, int nb); extern int xmon_8xx_read_poll(void); extern int xmon_8xx_read_char(void); -void prom_drawhex(uint); -void prom_drawstring(const char *str); -static int use_screen = 1; /* default */ - -#define TB_SPEED 25000000 - -static inline unsigned int readtb(void) -{ - unsigned int ret; - - asm volatile("mftb %0" : "=r" (ret) :); - return ret; -} - -void buf_access(void) -{ -} - -void -xmon_map_scc(void) +void xmon_map_scc(void) { - cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - use_screen = 0; - - prom_drawstring("xmon uses serial port\n"); } -static int scc_initialized = 0; - void xmon_init_scc(void); -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { - char *p = ptr; - int i, c, ct; - - if (!scc_initialized) - xmon_init_scc(); - return(xmon_8xx_write(ptr, nb)); } -int xmon_wants_key; - -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - char *p = ptr; - int i; - - if (!scc_initialized) - xmon_init_scc(); - - for (i = 0; i < nb; ++i) { - *p++ = xmon_8xx_read_char(); - } - return i; + return xmon_8xx_read_char(); } -int -xmon_read_poll(void) +int xmon_read_poll(void) { return(xmon_8xx_read_poll()); } - -void -xmon_init_scc() -{ - scc_initialized = 1; -} - -#if 0 -extern int (*prom_entry)(void *); - -int -xmon_exit(void) -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom_entry)(&args); - } -} -#endif - -void *xmon_stdin; -void *xmon_stdout; -void *xmon_stderr; - -void -xmon_init(void) -{ -} - -int -xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int -xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int -xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -#if 0 -int xmon_expect(const char *str, unsigned int timeout) -{ - int c; - unsigned int t0; - - timeout *= TB_SPEED; - t0 = readtb(); - do { - lineptr = line; - for (;;) { - c = xmon_read_poll(); - if (c == -1) { - if (readtb() - t0 > timeout) - return 0; - continue; - } - if (c == '\n') - break; - if (c != '\r' && lineptr < &line[sizeof(line) - 1]) - *lineptr++ = c; - } - *lineptr = 0; - } while (strstr(line, str) == NULL); - return 1; -} -#endif - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return 0; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} - -void -prom_drawhex(uint val) -{ - unsigned char buf[10]; - - int i; - for (i = 7; i >= 0; i--) - { - buf[i] = "0123456789abcdef"[val & 0x0f]; - val >>= 4; - } - buf[8] = '\0'; - xmon_fputs(buf, xmon_stdout); -} - -void -prom_drawstring(const char *str) -{ - xmon_fputs(str, xmon_stdout); -} diff --git a/arch/powerpc/xmon/subr_prf.c b/arch/powerpc/xmon/subr_prf.c deleted file mode 100644 index b48738c6dd33..000000000000 --- a/arch/powerpc/xmon/subr_prf.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Written by Cort Dougan to replace the version originally used - * by Paul Mackerras, which came from NetBSD and thus had copyright - * conflicts with Linux. - * - * This file makes liberal use of the standard linux utility - * routines to reduce the size of the binary. We assume we can - * trust some parts of Linux inside the debugger. - * -- Cort (cort@cs.nmt.edu) - * - * Copyright (C) 1999 Cort Dougan. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/module.h> -#include <stdarg.h> -#include "nonstdio.h" - -extern int xmon_write(void *, void *, int); - -void xmon_vfprintf(void *f, const char *fmt, va_list ap) -{ - static char xmon_buf[2048]; - int n; - - n = vsprintf(xmon_buf, fmt, ap); - xmon_write(f, xmon_buf, n); -} - -void xmon_printf(const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - xmon_vfprintf(stdout, fmt, ap); - va_end(ap); -} -EXPORT_SYMBOL(xmon_printf); - -void xmon_fprintf(void *f, const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - xmon_vfprintf(f, fmt, ap); - va_end(ap); -} - diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1124f1146202..c45a6ad5f3b7 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -1,7 +1,7 @@ /* * Routines providing a simple monitor for use on the PowerMac. * - * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 1996-2005 Paul Mackerras. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,6 +18,8 @@ #include <linux/kallsyms.h> #include <linux/cpumask.h> #include <linux/module.h> +#include <linux/sysrq.h> +#include <linux/interrupt.h> #include <asm/ptrace.h> #include <asm/string.h> @@ -144,15 +146,10 @@ static void xmon_print_symbol(unsigned long address, const char *mid, static const char *getvecname(unsigned long vec); extern int print_insn_powerpc(unsigned long, unsigned long, int); -extern void printf(const char *fmt, ...); -extern void xmon_vfprintf(void *f, const char *fmt, va_list ap); -extern int xmon_putc(int c, void *f); -extern int putchar(int ch); extern void xmon_enter(void); extern void xmon_leave(void); -extern int xmon_read_poll(void); extern long setjmp(long *); extern void longjmp(long *, long); extern void xmon_save_regs(struct pt_regs *); @@ -748,7 +745,6 @@ cmds(struct pt_regs *excp) printf("%x:", smp_processor_id()); #endif /* CONFIG_SMP */ printf("mon> "); - fflush(stdout); flush_input(); termch = 0; cmd = skipbl(); @@ -1472,17 +1468,23 @@ read_spr(int n) { unsigned int instrs[2]; unsigned long (*code)(void); - unsigned long opd[3]; unsigned long ret = -1UL; +#ifdef CONFIG_PPC64 + unsigned long opd[3]; - instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6); - instrs[1] = 0x4e800020; opd[0] = (unsigned long)instrs; opd[1] = 0; opd[2] = 0; + code = (unsigned long (*)(void)) opd; +#else + code = (unsigned long (*)(void)) instrs; +#endif + + /* mfspr r3,n; blr */ + instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6); + instrs[1] = 0x4e800020; store_inst(instrs); store_inst(instrs+1); - code = (unsigned long (*)(void)) opd; if (setjmp(bus_error_jmp) == 0) { catch_memory_errors = 1; @@ -1504,16 +1506,21 @@ write_spr(int n, unsigned long val) { unsigned int instrs[2]; unsigned long (*code)(unsigned long); +#ifdef CONFIG_PPC64 unsigned long opd[3]; - instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6); - instrs[1] = 0x4e800020; opd[0] = (unsigned long)instrs; opd[1] = 0; opd[2] = 0; + code = (unsigned long (*)(unsigned long)) opd; +#else + code = (unsigned long (*)(unsigned long)) instrs; +#endif + + instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6); + instrs[1] = 0x4e800020; store_inst(instrs); store_inst(instrs+1); - code = (unsigned long (*)(unsigned long)) opd; if (setjmp(bus_error_jmp) == 0) { catch_memory_errors = 1; @@ -1797,7 +1804,7 @@ memex(void) for(;;){ if (!mnoread) n = mread(adrs, val, size); - printf("%.16x%c", adrs, brev? 'r': ' '); + printf(REG"%c", adrs, brev? 'r': ' '); if (!mnoread) { if (brev) byterev(val, size); @@ -1976,17 +1983,18 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & 7) == 0 && m > 0) - putchar(' '); + if ((m & (sizeof(long) - 1)) == 0 && m > 0) + putchar(' '); if (m < nr) printf("%.2x", temp[m]); else printf("%s", fault_chars[fault_type]); } - if (m <= 8) - printf(" "); - for (; m < 16; ++m) + for (; m < 16; ++m) { + if ((m & (sizeof(long) - 1)) == 0) + putchar(' '); printf(" "); + } printf(" |"); for (m = 0; m < r; ++m) { if (m < nr) { @@ -2151,7 +2159,6 @@ memzcan(void) ok = mread(a, &v, 1); if (ok && !ook) { printf("%.8x .. ", a); - fflush(stdout); } else if (!ok && ook) printf("%.8x\n", a - mskip); ook = ok; @@ -2372,7 +2379,7 @@ int inchar(void) { if (lineptr == NULL || *lineptr == 0) { - if (fgets(line, sizeof(line), stdin) == NULL) { + if (xmon_gets(line, sizeof(line)) == NULL) { lineptr = NULL; return EOF; } @@ -2526,4 +2533,29 @@ void xmon_init(int enable) __debugger_dabr_match = NULL; __debugger_fault_handler = NULL; } + xmon_map_scc(); +} + +#ifdef CONFIG_MAGIC_SYSRQ +static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, + struct tty_struct *tty) +{ + /* ensure xmon is enabled */ + xmon_init(1); + debugger(pt_regs); +} + +static struct sysrq_key_op sysrq_xmon_op = +{ + .handler = sysrq_handle_xmon, + .help_msg = "Xmon", + .action_msg = "Entering xmon", +}; + +static int __init setup_xmon_sysrq(void) +{ + register_sysrq_key('x', &sysrq_xmon_op); + return 0; } +__initcall(setup_xmon_sysrq); +#endif /* CONFIG_MAGIC_SYSRQ */ diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index e95c48d57571..84d96b857e4a 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -1145,8 +1145,8 @@ static int set_serial_info(struct SICC_info *info, info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | (info->flags & ASYNC_INTERNAL_FLAGS)); state->custom_divisor = new_serial.custom_divisor; - state->close_delay = new_serial.close_delay * HZ / 100; - state->closing_wait = new_serial.closing_wait * HZ / 100; + state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay); + state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait); info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; port->fifosize = new_serial.xmit_fifo_size; @@ -1465,10 +1465,8 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp) info->event = 0; info->tty = NULL; if (info->blocked_open) { - if (info->state->close_delay) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(info->state->close_delay); - } + if (info->state->close_delay) + schedule_timeout_interruptible(info->state->close_delay); wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); @@ -1496,7 +1494,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) * Note: we have to use pretty tight timings here to satisfy * the NIST-PCTS. */ - char_time = (info->timeout - HZ/50) / info->port->fifosize; + char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize; char_time = char_time / 5; if (char_time == 0) char_time = 1; @@ -1521,8 +1519,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) tty->index, jiffies, expire, char_time); while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(char_time); + schedule_timeout_interruptible(char_time); if (signal_pending(current)) break; if (timeout && time_after(jiffies, expire)) @@ -1773,7 +1770,7 @@ int __init siccuart_init(void) for (i = 0; i < SERIAL_SICC_NR; i++) { struct SICC_state *state = sicc_state + i; state->line = i; - state->close_delay = 5 * HZ / 10; + state->close_delay = msecs_to_jiffies(500); state->closing_wait = 30 * HZ; spin_lock_init(&state->sicc_lock); } diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c index 2086c6ad1147..4edeede9ccfd 100644 --- a/arch/ppc/8260_io/fcc_enet.c +++ b/arch/ppc/8260_io/fcc_enet.c @@ -1309,8 +1309,7 @@ static void mii_dm9161_wait(uint mii_reg, struct net_device *dev) /* Davicom takes a bit to come up after a reset, * so wait here for a bit */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(timeout); + schedule_timeout_uninterruptible(timeout); } static phy_info_t phy_info_dm9161 = { diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 532caa388dc2..49eb2a7e65c0 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1013,8 +1013,7 @@ static void CS_IrqCleanup(void) */ cpm_free_handler(CPMVEC_SMC2); - if (beep_buf) - kfree(beep_buf); + kfree(beep_buf); kd_mksound = orig_mksound; } #endif /* MODULE */ diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 114b90fdea24..8fa51b0a32d2 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -746,6 +746,16 @@ config MPC834x bool default y if MPC834x_SYS +config CPM1 + bool + depends on 8xx + default y + help + The CPM1 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM1 coprocessor + on it (8xx, 827x, 8560). + config CPM2 bool depends on 8260 || MPC8560 || MPC8555 @@ -1247,6 +1257,14 @@ source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" +config RAPIDIO + bool "RapidIO support" if MPC8540 || MPC8560 + help + If you say Y here, the kernel will include drivers and + infrastructure code to support RapidIO interconnect devices. + +source "drivers/rapidio/Kconfig" + endmenu menu "Advanced setup" diff --git a/arch/ppc/boot/include/of1275.h b/arch/ppc/boot/include/of1275.h index 69173df76db0..4ed88acfa73a 100644 --- a/arch/ppc/boot/include/of1275.h +++ b/arch/ppc/boot/include/of1275.h @@ -19,6 +19,9 @@ extern prom_entry of_prom_entry; /* function declarations */ +int call_prom(const char *service, int nargs, int nret, ...); +int call_prom_ret(const char *service, int nargs, int nret, + unsigned int *rets, ...); void * claim(unsigned int virt, unsigned int size, unsigned int align); int map(unsigned int phys, unsigned int virt, unsigned int size); void enter(void); diff --git a/arch/ppc/boot/of1275/Makefile b/arch/ppc/boot/of1275/Makefile index 02e6f235d7cb..0b979c004972 100644 --- a/arch/ppc/boot/of1275/Makefile +++ b/arch/ppc/boot/of1275/Makefile @@ -3,4 +3,4 @@ # lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o \ - ofstdio.o read.o release.o write.o map.o + ofstdio.o read.o release.o write.o map.o call_prom.o diff --git a/arch/ppc/boot/of1275/call_prom.c b/arch/ppc/boot/of1275/call_prom.c new file mode 100644 index 000000000000..9479a3a2b8c7 --- /dev/null +++ b/arch/ppc/boot/of1275/call_prom.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include "of1275.h" +#include <stdarg.h> + +int call_prom(const char *service, int nargs, int nret, ...) +{ + int i; + struct prom_args { + const char *service; + int nargs; + int nret; + unsigned int args[12]; + } args; + va_list list; + + args.service = service; + args.nargs = nargs; + args.nret = nret; + + va_start(list, nret); + for (i = 0; i < nargs; i++) + args.args[i] = va_arg(list, unsigned int); + va_end(list); + + for (i = 0; i < nret; i++) + args.args[nargs+i] = 0; + + if (of_prom_entry(&args) < 0) + return -1; + + return (nret > 0)? args.args[nargs]: 0; +} + +int call_prom_ret(const char *service, int nargs, int nret, + unsigned int *rets, ...) +{ + int i; + struct prom_args { + const char *service; + int nargs; + int nret; + unsigned int args[12]; + } args; + va_list list; + + args.service = service; + args.nargs = nargs; + args.nret = nret; + + va_start(list, rets); + for (i = 0; i < nargs; i++) + args.args[i] = va_arg(list, unsigned int); + va_end(list); + + for (i = 0; i < nret; i++) + args.args[nargs+i] = 0; + + if (of_prom_entry(&args) < 0) + return -1; + + if (rets != (void *) 0) + for (i = 1; i < nret; ++i) + rets[i-1] = args.args[nargs+i]; + + return (nret > 0)? args.args[nargs]: 0; +} diff --git a/arch/ppc/boot/of1275/claim.c b/arch/ppc/boot/of1275/claim.c index 13169a5c4339..1ed3aeeff8ae 100644 --- a/arch/ppc/boot/of1275/claim.c +++ b/arch/ppc/boot/of1275/claim.c @@ -9,27 +9,84 @@ */ #include "of1275.h" +#include "nonstdio.h" -void * -claim(unsigned int virt, unsigned int size, unsigned int align) +/* + * Older OF's require that when claiming a specific range of addresses, + * we claim the physical space in the /memory node and the virtual + * space in the chosen mmu node, and then do a map operation to + * map virtual to physical. + */ +static int need_map = -1; +static ihandle chosen_mmu; +static phandle memory; + +/* returns true if s2 is a prefix of s1 */ +static int string_match(const char *s1, const char *s2) +{ + for (; *s2; ++s2) + if (*s1++ != *s2) + return 0; + return 1; +} + +static int check_of_version(void) +{ + phandle oprom, chosen; + char version[64]; + + oprom = finddevice("/openprom"); + if (oprom == OF_INVALID_HANDLE) + return 0; + if (getprop(oprom, "model", version, sizeof(version)) <= 0) + return 0; + version[sizeof(version)-1] = 0; + printf("OF version = '%s'\n", version); + if (!string_match(version, "Open Firmware, 1.") + && !string_match(version, "FirmWorks,3.")) + return 0; + chosen = finddevice("/chosen"); + if (chosen == OF_INVALID_HANDLE) { + chosen = finddevice("/chosen@0"); + if (chosen == OF_INVALID_HANDLE) { + printf("no chosen\n"); + return 0; + } + } + if (getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) { + printf("no mmu\n"); + return 0; + } + memory = (ihandle) call_prom("open", 1, 1, "/memory"); + if (memory == OF_INVALID_HANDLE) { + memory = (ihandle) call_prom("open", 1, 1, "/memory@0"); + if (memory == OF_INVALID_HANDLE) { + printf("no memory node\n"); + return 0; + } + } + printf("old OF detected\n"); + return 1; +} + +void *claim(unsigned int virt, unsigned int size, unsigned int align) { - struct prom_args { - char *service; - int nargs; - int nret; - unsigned int virt; - unsigned int size; - unsigned int align; - void *ret; - } args; + int ret; + unsigned int result; - args.service = "claim"; - args.nargs = 3; - args.nret = 1; - args.virt = virt; - args.size = size; - args.align = align; - args.ret = (void *) 0; - (*of_prom_entry)(&args); - return args.ret; + if (need_map < 0) + need_map = check_of_version(); + if (align || !need_map) + return (void *) call_prom("claim", 3, 1, virt, size, align); + + ret = call_prom_ret("call-method", 5, 2, &result, "claim", memory, + align, size, virt); + if (ret != 0 || result == -1) + return (void *) -1; + ret = call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu, + align, size, virt); + /* 0x12 == coherent + read/write */ + ret = call_prom("call-method", 6, 1, "map", chosen_mmu, + 0x12, size, virt, virt); + return virt; } diff --git a/arch/ppc/boot/of1275/finddevice.c b/arch/ppc/boot/of1275/finddevice.c index 2c0f7cbb793e..0dcb1201b772 100644 --- a/arch/ppc/boot/of1275/finddevice.c +++ b/arch/ppc/boot/of1275/finddevice.c @@ -10,22 +10,7 @@ #include "of1275.h" -phandle -finddevice(const char *name) +phandle finddevice(const char *name) { - struct prom_args { - char *service; - int nargs; - int nret; - const char *devspec; - phandle device; - } args; - - args.service = "finddevice"; - args.nargs = 1; - args.nret = 1; - args.devspec = name; - args.device = OF_INVALID_HANDLE; - (*of_prom_entry)(&args); - return args.device; + return (phandle) call_prom("finddevice", 1, 1, name); } diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 03415238fabf..83a6433459ce 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -80,8 +80,7 @@ $(obj)/note: $(utils)/mknote FORCE $(call if_changed,mknote) -$(obj)/coffcrt0.o: EXTRA_AFLAGS := -traditional -DXCOFF -$(obj)/crt0.o: EXTRA_AFLAGS := -traditional +$(obj)/coffcrt0.o: EXTRA_AFLAGS := -DXCOFF targets += coffcrt0.o crt0.o $(obj)/coffcrt0.o $(obj)/crt0.o: $(common)/crt0.S FORCE $(call if_changed_dep,as_o_S) diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index b7bd8f61a4ad..82df88b01bbe 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE entrypoint-$(CONFIG_BAMBOO) := 0x01000000 extra.o-$(CONFIG_BAMBOO) := pibs.o + zimage-$(CONFIG_BUBINGA) := zImage-TREE +zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE + end-$(CONFIG_BUBINGA) := bubinga + entrypoint-$(CONFIG_BUBINGA) := 0x01000000 + extra.o-$(CONFIG_BUBINGA) := openbios.o + zimage-$(CONFIG_EBONY) := zImage-TREE zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE end-$(CONFIG_EBONY) := ebony @@ -79,12 +85,30 @@ zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE entrypoint-$(CONFIG_LUAN) := 0x01000000 extra.o-$(CONFIG_LUAN) := pibs.o + zimage-$(CONFIG_YUCCA) := zImage-TREE +zimageinitrd-$(CONFIG_YUCCA) := zImage.initrd-TREE + end-$(CONFIG_YUCCA) := yucca + entrypoint-$(CONFIG_YUCCA) := 0x01000000 + extra.o-$(CONFIG_YUCCA) := pibs.o + zimage-$(CONFIG_OCOTEA) := zImage-TREE zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE end-$(CONFIG_OCOTEA) := ocotea entrypoint-$(CONFIG_OCOTEA) := 0x01000000 extra.o-$(CONFIG_OCOTEA) := pibs.o + zimage-$(CONFIG_SYCAMORE) := zImage-TREE +zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE + end-$(CONFIG_SYCAMORE) := sycamore + entrypoint-$(CONFIG_SYCAMORE) := 0x01000000 + extra.o-$(CONFIG_SYCAMORE) := openbios.o + + zimage-$(CONFIG_WALNUT) := zImage-TREE +zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE + end-$(CONFIG_WALNUT) := walnut + entrypoint-$(CONFIG_WALNUT) := 0x01000000 + extra.o-$(CONFIG_WALNUT) := openbios.o + extra.o-$(CONFIG_EV64260) := misc-ev64260.o end-$(CONFIG_EV64260) := ev64260 cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3) @@ -162,7 +186,8 @@ OBJCOPY_ARGS := -O elf32-powerpc # head.o and relocate.o must be at the start. boot-y := head.o relocate.o $(extra.o-y) $(misc-y) -boot-$(CONFIG_40x) += embed_config.o +boot-$(CONFIG_REDWOOD_5) += embed_config.o +boot-$(CONFIG_REDWOOD_6) += embed_config.o boot-$(CONFIG_8xx) += embed_config.o boot-$(CONFIG_8260) += embed_config.o boot-$(CONFIG_BSEIP) += iic.o diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index e02de5b467a4..f415d6c62362 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -23,7 +23,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/bootinfo.h> -#ifdef CONFIG_44x +#ifdef CONFIG_4xx #include <asm/ibm4xx.h> #endif #include <asm/reg.h> @@ -88,6 +88,14 @@ get_mem_size(void) return 0; } +#if defined(CONFIG_40x) +#define PPC4xx_EMAC0_MR0 EMAC0_BASE +#endif + +#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) +#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0 +#endif + struct bi_record * decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) { @@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) com_port = serial_init(0, NULL); #endif -#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) +#if defined(PPC4xx_EMAC0_MR0) /* Reset MAL */ mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* Wait for reset */ while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* Reset EMAC */ - *(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000; + *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000; __asm__ __volatile__("eieio"); #endif @@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); } +#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */ avail_ram = (char *)0x00400000; +#endif end_avail = (char *)0x00800000; puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" "); puthex((unsigned long)end_avail); puts("\n"); diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c index c732b6d70cfb..81f11d8b30a7 100644 --- a/arch/ppc/boot/simple/openbios.c +++ b/arch/ppc/boot/simple/openbios.c @@ -1,19 +1,43 @@ /* * arch/ppc/boot/simple/openbios.c * - * 2005 (c) SYSGO AG - g.jaeger@sysgo.com + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * 2005 (c) SYSGO AG - g.jaeger@sysgo.com + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. * - * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista) */ #include <linux/types.h> #include <linux/config.h> #include <linux/string.h> #include <asm/ppcboot.h> -#include <platforms/4xx/ebony.h> +#include <asm/ibm4xx.h> +#include <asm/reg.h> +#ifdef CONFIG_40x +#include <asm/io.h> +#endif + +#if defined(CONFIG_BUBINGA) +#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ +#else +#define BOARD_INFO_VECTOR 0xFFFE0B50 +#endif + +#ifdef CONFIG_40x +/* Supply a default Ethernet address for those eval boards that don't + * ship with one. This is an address from the MBX board I have, so + * it is unlikely you will find it on your network. + */ +static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 }; + +extern unsigned long timebase_period_ns; +#endif /* CONFIG_40x */ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum); @@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); bd_t *hold_residual = &hold_resid_buf; +typedef struct openbios_board_info { + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[30]; /* Version of the IBM ROM */ + unsigned int bi_memsize; /* DRAM installed, in bytes */ +#ifdef CONFIG_405EP + unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ +#else /* CONFIG_405EP */ + unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ +#endif /* CONFIG_405EP */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ + unsigned int bi_intfreq; /* Processor speed, in Hz */ + unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ +#ifdef CONFIG_405EP + unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ + unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ +#endif /* CONFIG_405EP */ +} openbios_bd_t; + void * load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, void *ign1, void *ign2) { - decompress_kernel(load_addr, num_words, cksum); +#ifdef CONFIG_40x + openbios_bd_t *openbios_bd = NULL; + openbios_bd_t *(*get_board_info)(void) = + (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); + + /* + * On 40x platforms we not only need the MAC-addresses, but also the + * clocks and memsize. Now try to get all values using the OpenBIOS + * "get_board_info()" callback. + */ + if ((openbios_bd = get_board_info()) != NULL) { + /* + * Copy bd_info from OpenBIOS struct into U-Boot struct + * used by kernel + */ + hold_residual->bi_memsize = openbios_bd->bi_memsize; + hold_residual->bi_intfreq = openbios_bd->bi_intfreq; + hold_residual->bi_busfreq = openbios_bd->bi_busfreq; + hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq; + memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6); +#ifdef CONFIG_405EP + memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6); + memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6); + hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq; + hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq; +#else /* CONFIG_405EP */ + memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6); +#endif /* CONFIG_405EP */ + } else { + /* Hmmm...better try to stuff some defaults. + */ + hold_residual->bi_memsize = 16 * 1024 * 1024; + hold_residual->bi_intfreq = 200000000; + hold_residual->bi_busfreq = 100000000; + hold_residual->bi_pci_busfreq = 66666666; + + /* + * Only supply one mac-address in this fallback + */ + memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6); +#ifdef CONFIG_405EP + hold_residual->bi_opbfreq = 50000000; + hold_residual->bi_procfreq = 200000000; +#endif /* CONFIG_405EP */ + } + timebase_period_ns = 1000000000 / hold_residual->bi_intfreq; +#endif /* CONFIG_40x */ + +#ifdef CONFIG_440GP /* simply copy the MAC addresses */ - memcpy(hold_residual->bi_enetaddr, (char *)EBONY_OPENBIOS_MAC_BASE, 6); - memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6); + memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6); + memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6); +#endif /* CONFIG_440GP */ + + decompress_kernel(load_addr, num_words, cksum); return (void *)hold_residual; } diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig index de9bbb791db9..d471e578dcb5 100644 --- a/arch/ppc/configs/ev64360_defconfig +++ b/arch/ppc/configs/ev64360_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc5 -# Fri Aug 5 15:18:23 2005 +# Linux kernel version: 2.6.14 +# Fri Oct 28 19:15:34 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -35,6 +36,7 @@ CONFIG_SYSCTL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -74,7 +76,7 @@ CONFIG_TAU=y # CONFIG_TAU_AVERAGE is not set # CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_STD_MMU=y CONFIG_NOT_COHERENT_CACHE=y @@ -86,22 +88,18 @@ CONFIG_NOT_COHERENT_CACHE=y # CONFIG_KATANA is not set # CONFIG_WILLOW is not set # CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set # CONFIG_HDPU is not set # CONFIG_EV64260 is not set # CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set # CONFIG_PPLUS is not set # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set # CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set @@ -138,10 +136,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -152,7 +153,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set # # PCCARD (PCMCIA/CardBus) support @@ -206,14 +206,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -239,6 +244,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -252,6 +258,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -358,7 +369,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -379,6 +389,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -420,6 +431,10 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# + +# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set @@ -434,6 +449,7 @@ CONFIG_NETDEVICES=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set @@ -446,6 +462,7 @@ CONFIG_MV643XX_ETH_0=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -547,7 +564,20 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_MV64X60_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -571,7 +601,6 @@ CONFIG_GEN_RTC=y # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -582,6 +611,7 @@ CONFIG_GEN_RTC=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -589,6 +619,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -651,10 +685,6 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -663,6 +693,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -683,11 +714,10 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -735,6 +765,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -751,6 +782,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -767,6 +799,7 @@ CONFIG_ZLIB_DEFLATE=y # CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SERIAL_TEXT_DEBUG is not set # # Security options diff --git a/arch/ppc/configs/mpc834x_sys_defconfig b/arch/ppc/configs/mpc834x_sys_defconfig index 4a5522ca8207..673dc64ebcb1 100644 --- a/arch/ppc/configs/mpc834x_sys_defconfig +++ b/arch/ppc/configs/mpc834x_sys_defconfig @@ -1,16 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Thu Feb 17 16:12:23 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 15:38:29 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -18,23 +19,28 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -59,34 +66,84 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set # CONFIG_E500 is not set +CONFIG_PPC_FPU=y +# CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_GEN550=y -CONFIG_83xx=y - -# -# Freescale 83xx options -# -CONFIG_MPC834x_SYS=y -CONFIG_MPC834x=y CONFIG_PPC_STD_MMU=y # # Platform options # +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_APUS is not set +# CONFIG_KATANA is not set +# CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set +# CONFIG_POWERPMC250 is not set +# CONFIG_CHESTNUT is not set +# CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set +# CONFIG_LOPEC is not set +# CONFIG_MVME5100 is not set +# CONFIG_PPLUS is not set +# CONFIG_PRPMC750 is not set +# CONFIG_PRPMC800 is not set +# CONFIG_SANDPOINT is not set +# CONFIG_RADSTONE_PPC7D is not set +# CONFIG_PAL4 is not set +# CONFIG_GEMINI is not set +# CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set +# CONFIG_SBS8260 is not set +# CONFIG_RPX8260 is not set +# CONFIG_TQM8260 is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_LITE5200 is not set +CONFIG_MPC834x_SYS=y +# CONFIG_EV64360 is not set +CONFIG_83xx=y +CONFIG_MPC834x=y # CONFIG_SMP is not set -# CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # Bus options # CONFIG_GENERIC_ISA_DMA=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_MPC83xx_PCI2 is not set +CONFIG_PCI_LEGACY_PROC=y # # PCCARD (PCMCIA/CardBus) support @@ -94,10 +151,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set @@ -112,6 +165,75 @@ CONFIG_TASK_SIZE=0x80000000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -123,6 +245,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -140,15 +267,19 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Block devices # # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -159,6 +290,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ATA_OVER_ETH is not set # @@ -169,6 +305,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -179,110 +316,116 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_IEEE1394 is not set # # I2O device support # +# CONFIG_I2O is not set # # Macintosh device drivers # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # -# SCTP Configuration (EXPERIMENTAL) +# ARCnet devices # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set +# CONFIG_ARCNET is not set # -# QoS and/or fair queueing +# PHY device support # -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set +CONFIG_PHYLIB=y # -# Network testing +# MII PHY device drivers # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y # CONFIG_GFAR_NAPI is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -293,10 +436,14 @@ CONFIG_GIANFAR=y # Wan interfaces # # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -323,14 +470,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -340,6 +479,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # # CONFIG_VT is not set @@ -358,6 +503,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -376,6 +522,7 @@ CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver @@ -385,6 +532,12 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# # I2C support # CONFIG_I2C=y @@ -400,23 +553,68 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -# CONFIG_I2C_ISA is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support # -# CONFIG_I2C_SENSOR is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -427,33 +625,26 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus +# Misc devices # -# CONFIG_W1 is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -479,11 +670,12 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # @@ -502,10 +694,15 @@ CONFIG_I2C_MPC=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -515,17 +712,16 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -546,12 +742,10 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -580,6 +774,7 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -588,6 +783,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -614,6 +810,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set @@ -625,7 +822,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SERIAL_TEXT_DEBUG is not set # diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig index 66dae8367659..3fedc43e44ad 100644 --- a/arch/ppc/configs/stx_gp3_defconfig +++ b/arch/ppc/configs/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc2 -# Wed Jan 26 14:32:58 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 24 18:11:04 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,7 +31,6 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set @@ -37,6 +38,9 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -46,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -69,9 +74,11 @@ CONFIG_KMOD=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set # CONFIG_SPE is not set CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -96,6 +103,7 @@ CONFIG_HIGHMEM=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -104,15 +112,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PC-card bridges -# +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_8_BIT_TRANSPORT=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -152,7 +160,7 @@ CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -264,7 +272,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -274,7 +281,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=m @@ -283,6 +289,7 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -322,7 +329,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -431,7 +437,7 @@ CONFIG_IP_NF_NAT_FTP=m # # Network testing # -# CONFIG_NET_PKTGEN is not set +CONFIG_NET_PKTGEN=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set @@ -499,6 +505,7 @@ CONFIG_GFAR_NAPI=y # Wan interfaces # # CONFIG_WAN is not set +CONFIG_RIONET=y # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set @@ -536,20 +543,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -567,6 +560,19 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -590,6 +596,7 @@ CONFIG_SERIAL_CPM_SCC2=y # CONFIG_SERIAL_CPM_SCC4 is not set # CONFIG_SERIAL_CPM_SMC1 is not set # CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -626,6 +633,11 @@ CONFIG_DRM=m # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=m @@ -648,12 +660,12 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -677,7 +689,9 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -688,9 +702,11 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -700,10 +716,12 @@ CONFIG_I2C_ALGOBIT=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -732,7 +750,6 @@ CONFIG_I2C_ALGOBIT=m # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -752,13 +769,9 @@ CONFIG_SOUND=m # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -789,6 +802,10 @@ CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -859,7 +876,6 @@ CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -942,8 +958,10 @@ CONFIG_ZLIB_INFLATE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index c610ca933a25..17a4da65e275 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -12,7 +12,7 @@ extra-$(CONFIG_6xx) += idle_6xx.o extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds -obj-y := entry.o traps.o irq.o idle.o time.o misc.o \ +obj-y := entry.o traps.o idle.o time.o misc.o \ process.o align.o \ setup.o \ ppc_htab.o @@ -22,6 +22,7 @@ obj-$(CONFIG_POWER4) += cpu_setup_power4.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_TAU) += temp.o @@ -37,8 +38,7 @@ endif # These are here while we do the architecture merge else -obj-y := irq.o idle.o \ - align.o +obj-y := idle.o align.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index 968261d69572..fe0e767fb94e 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -25,6 +25,7 @@ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/thread_info.h> +#include <asm/vdso_datapage.h> #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) @@ -143,5 +144,32 @@ main(void) DEFINE(TASK_SIZE, TASK_SIZE); DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28); + + /* datapage offsets for use by vdso */ + DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp)); + DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec)); + DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs)); + DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec)); + DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count)); + DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest)); + DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime)); + DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32)); + DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec)); + DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); + DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec)); + DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec)); + DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); + + /* timeval/timezone offsets for use by vdso */ + DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); + DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime)); + + /* Other bits used by the vdso */ + DEFINE(CLOCK_REALTIME, CLOCK_REALTIME); + DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC); + DEFINE(NSEC_PER_SEC, NSEC_PER_SEC); + DEFINE(CLOCK_REALTIME_RES, TICK_NSEC); + return 0; } diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 8b49679fad54..677c571aa276 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -190,8 +190,8 @@ skpinv: addi r4,r4,1 /* Increment */ /* xlat fields */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ -#ifndef CONFIG_440EP - ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */ +#ifdef UART0_PHYS_ERPN + ori r4,r4,UART0_PHYS_ERPN /* Add ERPN if above 4GB */ #endif /* attrib fields */ diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index aeb349b47af3..f3d274c6b231 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -358,6 +358,6 @@ label: NORMAL_EXCEPTION_PROLOG; \ bne load_up_fpu; /* if from user, just load it up */ \ addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_EE_LITE(0x800, KernelFP) + EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception) #endif /* __HEAD_BOOKE_H__ */ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 5063c603fad4..8d60fa99fc4b 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -24,7 +24,7 @@ * Copyright 2002-2004 MontaVista Software, Inc. * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org> * Copyright 2004 Freescale Semiconductor, Inc - * PowerPC e500 modifications, Kumar Gala <kumar.gala@freescale.com> + * PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c index 11e5b44713f7..821a75e45602 100644 --- a/arch/ppc/kernel/idle.c +++ b/arch/ppc/kernel/idle.c @@ -53,10 +53,6 @@ void default_idle(void) } #endif } - if (need_resched()) - schedule(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); } /* @@ -64,11 +60,22 @@ void default_idle(void) */ void cpu_idle(void) { - for (;;) - if (ppc_md.idle != NULL) - ppc_md.idle(); - else - default_idle(); + int cpu = smp_processor_id(); + + for (;;) { + while (!need_resched()) { + if (ppc_md.idle != NULL) + ppc_md.idle(); + else + default_idle(); + } + + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } #if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx) diff --git a/arch/ppc/kernel/irq.c b/arch/ppc/kernel/irq.c deleted file mode 100644 index fbb2b9f8922c..000000000000 --- a/arch/ppc/kernel/irq.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * arch/ppc/kernel/irq.c - * - * Derived from arch/i386/kernel/irq.c - * Copyright (C) 1992 Linus Torvalds - * Adapted from arch/i386 by Gary Thomas - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan <cort@fsmlabs.com> - * Copyright (C) 1996-2001 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras - * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines - * instead of just grabbing them. Thus setups with different IRQ numbers - * shouldn't result in any weird surprises, and installing new handlers - * should be easier. - * - * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the - * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit - * mask register (of which only 16 are defined), hence the weird shifting - * and complement of the cached_irq_mask. I want to be able to stuff - * this right into the SIU SMASK register. - * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx - * to reduce code space and undefined function references. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/threads.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/config.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/proc_fs.h> -#include <linux/random.h> -#include <linux/seq_file.h> -#include <linux/cpumask.h> -#include <linux/profile.h> -#include <linux/bitops.h> - -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/cache.h> -#include <asm/prom.h> -#include <asm/ptrace.h> -#include <asm/machdep.h> - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) - -extern atomic_t ipi_recv; -extern atomic_t ipi_sent; - -#define MAXCOUNT 10000000 - -int ppc_spurious_interrupts = 0; -struct irqaction *ppc_irq_action[NR_IRQS]; -unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -atomic_t ppc_n_lost_interrupts; - -#ifdef CONFIG_TAU_INT -extern int tau_initialized; -extern int tau_interrupts(int); -#endif - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - unsigned long flags; - - if (i == 0) { - seq_puts(p, " "); - for (j=0; j<NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "CPU%d ", j); - seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if ( !action || !action->handler ) - goto skip; - seq_printf(p, "%3d: ", i); -#ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", - kstat_cpu(j).irqs[i]); -#else - seq_printf(p, "%10u ", kstat_irqs(i)); -#endif /* CONFIG_SMP */ - if (irq_desc[i].handler) - seq_printf(p, " %s ", irq_desc[i].handler->typename); - else - seq_puts(p, " None "); - seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { -#ifdef CONFIG_TAU_INT - if (tau_initialized){ - seq_puts(p, "TAU: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", tau_interrupts(j)); - seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); - } -#endif -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) - /* should this be per processor send/receive? */ - seq_printf(p, "IPI (recv/sent): %10u/%u\n", - atomic_read(&ipi_recv), atomic_read(&ipi_sent)); -#endif - seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); - } - return 0; -} - -void do_IRQ(struct pt_regs *regs) -{ - int irq, first = 1; - irq_enter(); - - /* - * Every platform is required to implement ppc_md.get_irq. - * This function will either return an irq number or -1 to - * indicate there are no more pending. But the first time - * through the loop this means there wasn't and IRQ pending. - * The value -2 is for buggy hardware and means that this IRQ - * has already been handled. -- Tom - */ - while ((irq = ppc_md.get_irq(regs)) >= 0) { - __do_IRQ(irq, regs); - first = 0; - } - if (irq != -2 && first) - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - irq_exit(); -} - -void __init init_IRQ(void) -{ - ppc_md.init_IRQ(); -} diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 3056ede2424d..5e61124581d0 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -25,6 +25,11 @@ #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#ifdef CONFIG_8xx +#define ISYNC_8xx isync +#else +#define ISYNC_8xx +#endif .text .align 5 @@ -492,9 +497,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) * and invalidate the corresponding instruction cache blocks. * This is a no-op on the 601. * - * flush_icache_range(unsigned long start, unsigned long stop) + * __flush_icache_range(unsigned long start, unsigned long stop) */ -_GLOBAL(flush_icache_range) +_GLOBAL(__flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) @@ -800,8 +805,18 @@ _GLOBAL(_insb) subi r4,r4,1 blelr- 00: lbz r5,0(r3) - eieio - stbu r5,1(r4) +01: eieio +02: stbu r5,1(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -811,8 +826,18 @@ _GLOBAL(_outsb) subi r4,r4,1 blelr- 00: lbzu r5,1(r4) - stb r5,0(r3) - eieio +01: stb r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -822,8 +847,18 @@ _GLOBAL(_insw) subi r4,r4,2 blelr- 00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) +01: eieio +02: sthu r5,2(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -833,8 +868,18 @@ _GLOBAL(_outsw) subi r4,r4,2 blelr- 00: lhzu r5,2(r4) - eieio - sthbrx r5,0,r3 +01: eieio +02: sthbrx r5,0,r3 + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -844,8 +889,18 @@ _GLOBAL(_insl) subi r4,r4,4 blelr- 00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) +01: eieio +02: stwu r5,4(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -855,8 +910,18 @@ _GLOBAL(_outsl) subi r4,r4,4 blelr- 00: lwzu r5,4(r4) - stwbrx r5,0,r3 - eieio +01: stwbrx r5,0,r3 +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -867,8 +932,18 @@ _GLOBAL(_insw_ns) subi r4,r4,2 blelr- 00: lhz r5,0(r3) - eieio - sthu r5,2(r4) +01: eieio +02: sthu r5,2(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -879,8 +954,18 @@ _GLOBAL(_outsw_ns) subi r4,r4,2 blelr- 00: lhzu r5,2(r4) - sth r5,0(r3) - eieio +01: sth r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -891,8 +976,18 @@ _GLOBAL(_insl_ns) subi r4,r4,4 blelr- 00: lwz r5,0(r3) - eieio - stwu r5,4(r4) +01: eieio +02: stwu r5,4(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -903,8 +998,18 @@ _GLOBAL(_outsl_ns) subi r4,r4,4 blelr- 00: lwzu r5,4(r4) - stw r5,0(r3) - eieio +01: stw r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index e8f4e576750a..48ed58f995c0 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -62,20 +62,6 @@ struct pci_controller** hose_tail = &hose_head; static int pci_bus_count; static void -fixup_rev1_53c810(struct pci_dev* dev) -{ - /* rev 1 ncr53c810 chips don't set the class at all which means - * they don't get their resources remapped. Fix that here. - */ - - if ((dev->class == PCI_CLASS_NOT_DEFINED)) { - printk("NCR 53c810 rev 1 detected, setting PCI class.\n"); - dev->class = PCI_CLASS_STORAGE_SCSI; - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); - -static void fixup_broken_pcnet32(struct pci_dev* dev) { if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index e0ca61b37f4f..66073f775193 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -46,6 +46,7 @@ #include <asm/btext.h> #include <asm/div64.h> #include <asm/xmon.h> +#include <asm/signal.h> #ifdef CONFIG_8xx #include <asm/commproc.h> @@ -57,7 +58,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int do_signal(sigset_t *, struct pt_regs *); extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); @@ -78,7 +78,6 @@ EXPORT_SYMBOL(program_check_exception); EXPORT_SYMBOL(single_step_exception); EXPORT_SYMBOL(sys_sigreturn); EXPORT_SYMBOL(ppc_n_lost_interrupts); -EXPORT_SYMBOL(ppc_lost_interrupts); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); EXPORT_SYMBOL(DMA_MODE_READ); @@ -176,6 +175,7 @@ EXPORT_SYMBOL(pci_bus_to_phys); #endif /* CONFIG_PCI */ #ifdef CONFIG_NOT_COHERENT_CACHE +extern void flush_dcache_all(void); EXPORT_SYMBOL(flush_dcache_all); #endif @@ -217,9 +217,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_MULTIPLATFORM -EXPORT_SYMBOL(_machine); -#endif #ifdef CONFIG_PPC_PMAC EXPORT_SYMBOL(sys_ctrler); EXPORT_SYMBOL(pmac_newworld); diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c new file mode 100644 index 000000000000..29487fedfc76 --- /dev/null +++ b/arch/ppc/kernel/rio.c @@ -0,0 +1,52 @@ +/* + * RapidIO PPC32 support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/rio.h> + +#include <asm/rio.h> + +/** + * platform_rio_init - Do platform specific RIO init + * + * Any platform specific initialization of RapdIO + * hardware is done here as well as registration + * of any active master ports in the system. + */ +void __attribute__ ((weak)) + platform_rio_init(void) +{ + printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); +} + +/** + * ppc_rio_init - Do PPC32 RIO init + * + * Calls platform-specific RIO init code and then calls + * rio_init_mports() to initialize any master ports that + * have been registered with the RIO subsystem. + */ +static int __init ppc_rio_init(void) +{ + printk(KERN_INFO "RIO: RapidIO init\n"); + + /* Platform specific initialization */ + platform_rio_init(); + + /* Enumerate all registered ports */ + rio_init_mports(); + + return 0; +} + +subsys_initcall(ppc_rio_init); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 6bcb85d2b7fd..0eb0b7085e6a 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -76,6 +76,7 @@ unsigned int DMA_MODE_WRITE; #ifdef CONFIG_PPC_MULTIPLATFORM int _machine = 0; +EXPORT_SYMBOL(_machine); extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); @@ -601,7 +602,19 @@ void parse_bootinfo(struct bi_record *rec) #endif /* CONFIG_BLK_DEV_INITRD */ #ifdef CONFIG_PPC_MULTIPLATFORM case BI_MACHTYPE: - _machine = data[0]; + /* Machine types changed with the merge. Since the + * bootinfo are now deprecated, we can just hard code + * the appropriate conversion here for when we are + * called with yaboot which passes us a machine type + * this way. + */ + switch(data[0]) { + case 1: _machine = _MACH_prep; break; + case 2: _machine = _MACH_Pmac; break; + case 4: _machine = _MACH_chrp; break; + default: + _machine = data[0]; + } break; #endif case BI_MEMSIZE: diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index bc5bf1124836..43b8fc2ca591 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -341,6 +341,7 @@ int __devinit start_secondary(void *unused) cpu = smp_processor_id(); smp_store_cpu_info(cpu); set_dec(tb_ticks_per_jiffy); + preempt_disable(); cpu_callin_map[cpu] = 1; printk("CPU %d done callin...\n", cpu); diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 16adde6b429d..9dbc4d28fa28 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -49,7 +49,7 @@ extern int xmon_sstep(struct pt_regs *regs); extern int xmon_iabr_match(struct pt_regs *regs); extern int xmon_dabr_match(struct pt_regs *regs); -void (*debugger)(struct pt_regs *regs) = xmon; +int (*debugger)(struct pt_regs *regs) = xmon; int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt; int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep; int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match; @@ -57,7 +57,7 @@ int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match; void (*debugger_fault_handler)(struct pt_regs *regs); #else #ifdef CONFIG_KGDB -void (*debugger)(struct pt_regs *regs); +int (*debugger)(struct pt_regs *regs); int (*debugger_bpt)(struct pt_regs *regs); int (*debugger_sstep)(struct pt_regs *regs); int (*debugger_iabr_match)(struct pt_regs *regs); @@ -159,7 +159,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) */ static inline int check_io_access(struct pt_regs *regs) { -#ifdef CONFIG_PPC_PMAC +#if defined CONFIG_PPC_PMAC || defined CONFIG_8xx unsigned long msr = regs->msr; const struct exception_table_entry *entry; unsigned int *nip = (unsigned int *)regs->nip; @@ -178,7 +178,11 @@ static inline int check_io_access(struct pt_regs *regs) nip -= 2; else if (*nip == 0x4c00012c) /* isync */ --nip; - if (*nip == 0x7c0004ac || (*nip >> 26) == 3) { + /* eieio from I/O string functions */ + else if ((*nip) == 0x7c0006ac || *(nip+1) == 0x7c0006ac) + nip += 2; + if (*nip == 0x7c0004ac || (*nip >> 26) == 3 || + (*(nip+1) >> 26) == 3) { /* sync or twi */ unsigned int rb; diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c index af9ca0eb6d55..5d581bb3aa12 100644 --- a/arch/ppc/mm/fsl_booke_mmu.c +++ b/arch/ppc/mm/fsl_booke_mmu.c @@ -1,5 +1,5 @@ /* - * Modifications by Kumar Gala (kumar.gala@freescale.com) to support + * Modifications by Kumar Gala (galak@kernel.crashing.org) to support * E500 Book E processors. * * Copyright 2004 Freescale Semiconductor, Inc diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 99b48abd3296..45f0782059f1 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -597,21 +597,20 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, if (pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); - if (!PageReserved(page) - && !test_bit(PG_arch_1, &page->flags)) { - if (vma->vm_mm == current->active_mm) { #ifdef CONFIG_8xx - /* On 8xx, cache control instructions (particularly - * "dcbst" from flush_dcache_icache) fault as write - * operation if there is an unpopulated TLB entry - * for the address in question. To workaround that, - * we invalidate the TLB here, thus avoiding dcbst - * misbehaviour. - */ - _tlbie(address); + /* On 8xx, the TLB handlers work in 2 stages: + * First, a zeroed entry is loaded by TLBMiss handler, + * which causes the TLBError handler to be triggered. + * That means the zeroed TLB has to be invalidated + * whenever a page miss occurs. + */ + _tlbie(address); #endif + if (!PageReserved(page) + && !test_bit(PG_arch_1, &page->flags)) { + if (vma->vm_mm == current->active_mm) __flush_dcache_icache((void *) address); - } else + else flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 76f4476cab44..d8837911bbc6 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -82,6 +82,12 @@ config LUAN help This option enables support for the IBM PPC440SP evaluation board. +config YUCCA + bool "Yucca" + select WANT_EARLY_SERIAL + help + This option enables support for the AMCC PPC440SPe evaluation board. + config OCOTEA bool "Ocotea" select WANT_EARLY_SERIAL @@ -124,9 +130,14 @@ config 440SP depends on LUAN default y +config 440SPE + bool + depends on YUCCA + default y + config 440 bool - depends on 440GP || 440SP || 440EP + depends on 440GP || 440SP || 440SPE || 440EP default y config 440A @@ -158,7 +169,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y config XILINX_OCP @@ -168,7 +179,7 @@ config XILINX_OCP config IBM_EMAC4 bool - depends on 440GX || 440SP + depends on 440GX || 440SP || 440SPE default y config BIOS_FIXUP @@ -214,7 +225,7 @@ config EMBEDDEDBOOT config IBM_OPENBIOS bool - depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || REDWOOD_5 || REDWOOD_6 default y config PPC4xx_DMA diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index 1dd6d7fd6a9a..c9bb61170954 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_BUBINGA) += bubinga.o obj-$(CONFIG_LUAN) += luan.o +obj-$(CONFIG_YUCCA) += yucca.o obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o @@ -22,6 +23,7 @@ obj-$(CONFIG_440EP) += ibm440ep.o obj-$(CONFIG_440GP) += ibm440gp.o obj-$(CONFIG_440GX) += ibm440gx.o obj-$(CONFIG_440SP) += ibm440sp.o +obj-$(CONFIG_440SPE) += ppc440spe.o obj-$(CONFIG_405EP) += ibm405ep.o obj-$(CONFIG_405GPR) += ibm405gpr.o obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 3678abf86313..8110f55668c5 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -89,7 +89,7 @@ bubinga_early_serial_map(void) * by 16. */ uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV); - uart_clock = __res.bi_pllouta_freq / uart_div; + uart_clock = __res.bi_procfreq / uart_div; /* Setup serial port access */ memset(&port, 0, sizeof(port)); diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h index b1df856f8e22..b5380cfaf5c0 100644 --- a/arch/ppc/platforms/4xx/bubinga.h +++ b/arch/ppc/platforms/4xx/bubinga.h @@ -1,52 +1,34 @@ /* - * Support for IBM PPC 405EP evaluation board (Bubinga). + * arch/ppc/platforms/4xx/bubinga.h * - * Author: SAW (IBM), derived from walnut.h. - * Maintained by MontaVista Software <source@mvista.com> + * Bubinga board definitions + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * SAW (IBM) + * 2003 (c) MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2003 (c) MontaVista Softare Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __BUBINGA_H__ #define __BUBINGA_H__ -/* 405EP */ +#include <linux/config.h> #include <platforms/4xx/ibm405ep.h> - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ - unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ - unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - +#include <asm/ppcboot.h> /* Memory map for the Bubinga board. * Generic 4xx plus RTC. */ -extern void *bubinga_rtc_base; #define BUBINGA_RTC_PADDR ((uint)0xf0000000) #define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR #define BUBINGA_RTC_SIZE ((uint)8*1024) @@ -58,12 +40,18 @@ extern void *bubinga_rtc_base; * for typical configurations at various CPU speeds. * The base baud is calculated as (FWDA / EXT UART DIV / 16) */ -#define BASE_BAUD 0 +#define BASE_BAUD 0 -#define BUBINGA_FPGA_BASE 0xF0300000 +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 -#define PPC4xx_MACHINE_NAME "IBM Bubinga" +#define PPC4xx_MACHINE_NAME "IBM Bubinga" -#endif /* !__ASSEMBLY__ */ #endif /* __BUBINGA_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index d08faa46a0ae..b91ad4272dfe 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -24,8 +24,8 @@ #define PPC44x_EMAC0_MR0 0xE0000800 /* Where to find the MAC info */ -#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c -#define EBONY_OPENBIOS_MAC_OFFSET 0x0c +#define OPENBIOS_MAC_BASE 0xfffffe0c +#define OPENBIOS_MAC_OFFSET 0x0c /* Default clock rates for Rev. B and Rev. C silicon */ #define EBONY_440GP_RB_SYSCLK 33000000 diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c new file mode 100644 index 000000000000..6139a0b3393e --- /dev/null +++ b/arch/ppc/platforms/4xx/ppc440spe.c @@ -0,0 +1,148 @@ +/* + * arch/ppc/platforms/4xx/ppc440spe.c + * + * PPC440SPe I/O descriptions + * + * Roland Dreier <rolandd@cisco.com> + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/init.h> +#include <linux/module.h> +#include <platforms/4xx/ppc440spe.h> +#include <asm/ocp.h> +#include <asm/ppc4xx_pic.h> + +static struct ocp_func_emac_data ppc440spe_emac0_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = -1, /* No ZMII */ + .zmii_mux = -1, /* No ZMII */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 0, /* MAL rx channel number */ + .mal_tx_chan = 0, /* MAL tx channel number */ + .wol_irq = 61, /* WOL interrupt number */ + .mdio_idx = -1, /* No shared MDIO */ + .tah_idx = -1, /* No TAH */ +}; +OCP_SYSFS_EMAC_DATA() + +static struct ocp_func_mal_data ppc440spe_mal0_def = { + .num_tx_chans = 1, /* Number of TX channels */ + .num_rx_chans = 1, /* Number of RX channels */ + .txeob_irq = 38, /* TX End Of Buffer IRQ */ + .rxeob_irq = 39, /* RX End Of Buffer IRQ */ + .txde_irq = 34, /* TX Descriptor Error IRQ */ + .rxde_irq = 35, /* RX Descriptor Error IRQ */ + .serr_irq = 33, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ +}; +OCP_SYSFS_MAL_DATA() + +static struct ocp_func_iic_data ppc440spe_iic0_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; + +static struct ocp_func_iic_data ppc440spe_iic1_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; +OCP_SYSFS_IIC_DATA() + +struct ocp_def core_ocp[] = { + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 0, + .paddr = PPC440SPE_UART0_ADDR, + .irq = UART0_INT, + .pm = IBM_CPM_UART0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 1, + .paddr = PPC440SPE_UART1_ADDR, + .irq = UART1_INT, + .pm = IBM_CPM_UART1, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 2, + .paddr = PPC440SPE_UART2_ADDR, + .irq = UART2_INT, + .pm = IBM_CPM_UART2, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 0, + .paddr = 0x00000004f0000400ULL, + .irq = 2, + .pm = IBM_CPM_IIC0, + .additions = &ppc440spe_iic0_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 1, + .paddr = 0x00000004f0000500ULL, + .irq = 3, + .pm = IBM_CPM_IIC1, + .additions = &ppc440spe_iic1_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .index = 0, + .paddr = 0x00000004f0000700ULL, + .irq = OCP_IRQ_NA, + .pm = IBM_CPM_GPIO0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_MAL, + .paddr = OCP_PADDR_NA, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + .additions = &ppc440spe_mal0_def, + .show = &ocp_show_mal_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 0, + .paddr = 0x00000004f0000800ULL, + .irq = 60, + .pm = OCP_CPM_NA, + .additions = &ppc440spe_emac0_def, + .show = &ocp_show_emac_data, + }, + { .vendor = OCP_VENDOR_INVALID + } +}; + +/* Polarity and triggering settings for internal interrupt sources */ +struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = { + { .polarity = 0xffffffff, + .triggering = 0x010f0004, + .ext_irq_mask = 0x00000000, + }, + { .polarity = 0xffffffff, + .triggering = 0x001f8040, + .ext_irq_mask = 0x00007c30, /* IRQ6 - IRQ7, IRQ8 - IRQ12 */ + }, + { .polarity = 0xffffffff, + .triggering = 0x00000000, + .ext_irq_mask = 0x000000fc, /* IRQ0 - IRQ5 */ + }, + { .polarity = 0xffffffff, + .triggering = 0x00000000, + .ext_irq_mask = 0x00000000, + }, +}; diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h new file mode 100644 index 000000000000..2216846973b8 --- /dev/null +++ b/arch/ppc/platforms/4xx/ppc440spe.h @@ -0,0 +1,66 @@ +/* + * arch/ppc/platforms/4xx/ibm440spe.h + * + * PPC440SPe definitions + * + * Roland Dreier <rolandd@cisco.com> + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2004-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __PPC_PLATFORMS_PPC440SPE_H +#define __PPC_PLATFORMS_PPC440SPE_H + +#include <linux/config.h> + +#include <asm/ibm44x.h> + +/* UART */ +#define PPC440SPE_UART0_ADDR 0x00000004f0000200ULL +#define PPC440SPE_UART1_ADDR 0x00000004f0000300ULL +#define PPC440SPE_UART2_ADDR 0x00000004f0000600ULL +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 37 + +/* Clock and Power Management */ +#define IBM_CPM_IIC0 0x80000000 /* IIC interface */ +#define IBM_CPM_IIC1 0x40000000 /* IIC interface */ +#define IBM_CPM_PCI 0x20000000 /* PCI bridge */ +#define IBM_CPM_CPU 0x02000000 /* processor core */ +#define IBM_CPM_DMA 0x01000000 /* DMA controller */ +#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */ +#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */ +#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */ +#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */ +#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */ +#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */ +#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */ +#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */ +#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */ +#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */ +#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */ +#define IBM_CPM_UART0 0x00000200 /* serial port 0 */ +#define IBM_CPM_UART1 0x00000100 /* serial port 1 */ +#define IBM_CPM_UART2 0x00000100 /* serial port 1 */ +#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */ +#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */ +#define IBM_CPM_EMAC0 0x00000020 /* EMAC 0 */ + +#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \ + | IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \ + | IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \ + | IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \ + | IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \ + | IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \ + | IBM_CPM_EMAC2 | IBM_CPM_EMAC3 ) +#endif /* __PPC_PLATFORMS_PPC440SP_H */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c index d8019eec4704..281b4a2ffb96 100644 --- a/arch/ppc/platforms/4xx/sycamore.c +++ b/arch/ppc/platforms/4xx/sycamore.c @@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) void __init sycamore_setup_arch(void) { -#define SYCAMORE_PS2_BASE 0xF0100000 -#define SYCAMORE_FPGA_BASE 0xF0300000 - void *fpga_brdc; unsigned char fpga_brdc_data; void *fpga_enable; @@ -100,7 +97,7 @@ sycamore_setup_arch(void) ppc4xx_setup_arch(); - ibm_ocp_set_emac(0, 1); + ibm_ocp_set_emac(0, 0); kb_data = ioremap(SYCAMORE_PS2_BASE, 8); if (!kb_data) { @@ -111,7 +108,7 @@ sycamore_setup_arch(void) kb_cs = kb_data + 1; - fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8); + fpga_status = ioremap(PPC40x_FPGA_BASE, 8); if (!fpga_status) { printk(KERN_CRIT "sycamore_setup_arch() fpga_status ioremap failed\n"); diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h index 3e7b4e2c8c57..1cd6c824fd62 100644 --- a/arch/ppc/platforms/4xx/sycamore.h +++ b/arch/ppc/platforms/4xx/sycamore.h @@ -1,67 +1,52 @@ /* * arch/ppc/platforms/4xx/sycamore.h * - * Macros, definitions, and data structures specific to the IBM PowerPC - * 405GPr "Sycamore" evaluation board. + * Sycamore board definitions * - * Author: Armin Kuster <akuster@mvista.com> + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * 2000 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2000 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_SYCAMORE_H__ #define __ASM_SYCAMORE_H__ +#include <linux/config.h> #include <platforms/4xx/ibm405gpr.h> +#include <asm/ppcboot.h> -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Sycamore" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - - -/* Memory map for the IBM "Sycamore" 405GP evaluation board. +/* Memory map for the IBM "Sycamore" 405GPr evaluation board. * Generic 4xx plus RTC. */ -extern void *sycamore_rtc_base; #define SYCAMORE_RTC_PADDR ((uint)0xf0000000) #define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR -#define SYCAMORE_RTC_SIZE ((uint)8*1024) +#define SYCAMORE_RTC_SIZE ((uint)8*1024) -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else #define BASE_BAUD 691200 -#endif -#define SYCAMORE_PS2_BASE 0xF0100000 -#define SYCAMORE_FPGA_BASE 0xF0300000 +#define SYCAMORE_PS2_BASE 0xF0100000 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 #define PPC4xx_MACHINE_NAME "IBM Sycamore" -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_SYCAMORE_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c index a33eda4b7489..74cb33182d9f 100644 --- a/arch/ppc/platforms/4xx/walnut.c +++ b/arch/ppc/platforms/4xx/walnut.c @@ -90,7 +90,7 @@ walnut_setup_arch(void) kb_cs = kb_data + 1; - fpga_status = ioremap(WALNUT_FPGA_BASE, 8); + fpga_status = ioremap(PPC40x_FPGA_BASE, 8); if (!fpga_status) { printk(KERN_CRIT "walnut_setup_arch() fpga_status ioremap failed\n"); diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h index 04cfbf3696b9..dcf2691698c0 100644 --- a/arch/ppc/platforms/4xx/walnut.h +++ b/arch/ppc/platforms/4xx/walnut.h @@ -1,72 +1,55 @@ /* * arch/ppc/platforms/4xx/walnut.h * - * Macros, definitions, and data structures specific to the IBM PowerPC - * 405GP "Walnut" evaluation board. + * Walnut board definitions * - * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand - * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or - * source@mvista.com + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> * - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * Based on original work by + * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * Frank Rowand <frank_rowand@mvista.com> + * Debbie Chu <debbie_chu@mvista.com> + * 2000 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2000 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_WALNUT_H__ #define __ASM_WALNUT_H__ -/* We have a 405GP core */ +#include <linux/config.h> #include <platforms/4xx/ibm405gp.h> - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Walnut" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - +#include <asm/ppcboot.h> /* Memory map for the IBM "Walnut" 405GP evaluation board. * Generic 4xx plus RTC. */ -extern void *walnut_rtc_base; #define WALNUT_RTC_PADDR ((uint)0xf0000000) #define WALNUT_RTC_VADDR WALNUT_RTC_PADDR #define WALNUT_RTC_SIZE ((uint)8*1024) -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else #define BASE_BAUD 691200 -#endif #define WALNUT_PS2_BASE 0xF0100000 -#define WALNUT_FPGA_BASE 0xF0300000 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 +#define WALNUT_FPGA_BASE PPC40x_FPGA_BASE #define PPC4xx_MACHINE_NAME "IBM Walnut" -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_WALNUT_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c new file mode 100644 index 000000000000..e60f4bd437ec --- /dev/null +++ b/arch/ppc/platforms/4xx/yucca.c @@ -0,0 +1,395 @@ +/* + * arch/ppc/platforms/4xx/yucca.c + * + * Yucca board specific routines + * + * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter) + * + * Copyright 2004-2005 MontaVista Software Inc. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/initrd.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serial_core.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ocp.h> +#include <asm/pci-bridge.h> +#include <asm/time.h> +#include <asm/todc.h> +#include <asm/bootinfo.h> +#include <asm/ppc4xx_pic.h> +#include <asm/ppcboot.h> + +#include <syslib/ibm44x_common.h> +#include <syslib/ibm440gx_common.h> +#include <syslib/ibm440sp_common.h> +#include <syslib/ppc440spe_pcie.h> + +extern bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +static void __init +yucca_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = YUCCA_TMR_CLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); +} + +static int +yucca_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: AMCC\n"); + seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n"); + + return 0; +} + +static enum { + HOSE_UNKNOWN, + HOSE_PCIX, + HOSE_PCIE0, + HOSE_PCIE1, + HOSE_PCIE2 +} hose_type[4]; + +static inline int +yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); + + if (hose_type[hose->index] == HOSE_PCIX) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 81, -1, -1, -1 }, /* IDSEL 1 - PCIX0 Slot 0 */ + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE0) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 96, 97, 98, 99 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE1) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 100, 101, 102, 103 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE2) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 104, 105, 106, 107 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } + return -1; +} + +static void __init yucca_set_emacdata(void) +{ + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + + /* Set phy_map, phy_mode, and mac_addr for the EMAC */ + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0); + emacdata = def->additions; + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_GMII; + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); +} + +static int __init yucca_pcie_card_present(int port) +{ + void __iomem *pcie_fpga_base; + u16 reg; + + pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE); + reg = in_be16(pcie_fpga_base + FPGA_REG1C); + iounmap(pcie_fpga_base); + + switch(port) { + case 0: return !(reg & FPGA_REG1C_PE0_PRSNT); + case 1: return !(reg & FPGA_REG1C_PE1_PRSNT); + case 2: return !(reg & FPGA_REG1C_PE2_PRSNT); + default: return 0; + } +} + +/* + * For the given slot, set rootpoint mode, send power to the slot, + * turn on the green LED and turn off the yellow LED, enable the clock + * and turn off reset. + */ +static void __init yucca_setup_pcie_fpga_rootpoint(int port) +{ + void __iomem *pcie_reg_fpga_base; + u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + + pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE); + + switch(port) { + case 0: + rootpoint = FPGA_REG1C_PE0_ROOTPOINT; + endpoint = 0; + power = FPGA_REG1A_PE0_PWRON; + green_led = FPGA_REG1A_PE0_GLED; + clock = FPGA_REG1A_PE0_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE0_YLED; + reset_off = FPGA_REG1C_PE0_PERST; + break; + case 1: + rootpoint = 0; + endpoint = FPGA_REG1C_PE1_ENDPOINT; + power = FPGA_REG1A_PE1_PWRON; + green_led = FPGA_REG1A_PE1_GLED; + clock = FPGA_REG1A_PE1_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE1_YLED; + reset_off = FPGA_REG1C_PE1_PERST; + break; + case 2: + rootpoint = 0; + endpoint = FPGA_REG1C_PE2_ENDPOINT; + power = FPGA_REG1A_PE2_PWRON; + green_led = FPGA_REG1A_PE2_GLED; + clock = FPGA_REG1A_PE2_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE2_YLED; + reset_off = FPGA_REG1C_PE2_PERST; + break; + + default: + return; + } + + out_be16(pcie_reg_fpga_base + FPGA_REG1A, + ~(power | clock | green_led) & + (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A))); + out_be16(pcie_reg_fpga_base + FPGA_REG1C, + ~(endpoint | reset_off) & + (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C))); + + /* + * Leave device in reset for a while after powering on the + * slot to give it a chance to initialize. + */ + mdelay(250); + + out_be16(pcie_reg_fpga_base + FPGA_REG1C, + reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C)); + + iounmap(pcie_reg_fpga_base); +} + +static void __init +yucca_setup_hoses(void) +{ + struct pci_controller *hose; + char name[20]; + int i; + + if (0 && ppc440spe_init_pcie()) { + printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n"); + return; + } + + for (i = 0; i <= 2; ++i) { + if (!yucca_pcie_card_present(i)) + continue; + + printk(KERN_INFO "PCIE%d: card present\n", i); + yucca_setup_pcie_fpga_rootpoint(i); + if (ppc440spe_init_pcie_rootport(i)) { + printk(KERN_WARNING "PCIE%d: initialization failed\n", i); + continue; + } + + hose = pcibios_alloc_controller(); + if (!hose) + return; + + sprintf(name, "PCIE%d host bridge", i); + pci_init_resource(&hose->io_resource, + YUCCA_PCIX_LOWER_IO, + YUCCA_PCIX_UPPER_IO, + IORESOURCE_IO, + name); + + hose->mem_space.start = YUCCA_PCIE_LOWER_MEM + + i * YUCCA_PCIE_MEM_SIZE; + hose->mem_space.end = hose->mem_space.start + + YUCCA_PCIE_MEM_SIZE - 1; + + pci_init_resource(&hose->mem_resources[0], + hose->mem_space.start, + hose->mem_space.end, + IORESOURCE_MEM, + name); + + hose->first_busno = 0; + hose->last_busno = 15; + hose_type[hose->index] = HOSE_PCIE0 + i; + + ppc440spe_setup_pcie(hose, i); + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + } + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = yucca_map_irq; +} + +TODC_ALLOC(); + +static void __init +yucca_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8); + port.irq = UART0_INT; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = SERIAL_IO_MEM; + port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + + port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8); + port.irq = UART1_INT; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } + + port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8); + port.irq = UART2_INT; + port.uartclk = BASE_BAUD; + port.line = 2; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 2 failed\n"); + } +} + +static void __init +yucca_setup_arch(void) +{ + yucca_set_emacdata(); + +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM)); +#endif + + /* + * Determine various clocks. + * To be completely correct we should get SysClk + * from FPGA, because it can be changed by on-board switches + * --ebs + */ + /* 440GX and 440SPe clocking is the same - rd */ + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCIXn host bridges */ + yucca_setup_hoses(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + yucca_early_serial_map(); + + /* Identify the system */ + printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n"); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + ibm44x_platform_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = yucca_setup_arch; + ppc_md.show_cpuinfo = yucca_show_cpuinfo; + ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = yucca_calibrate_decr; +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = yucca_early_serial_map; +#endif +} diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h new file mode 100644 index 000000000000..01a4afea1514 --- /dev/null +++ b/arch/ppc/platforms/4xx/yucca.h @@ -0,0 +1,111 @@ +/* + * arch/ppc/platforms/4xx/yucca.h + * + * Yucca board definitions + * + * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter) + * + * Copyright 2004-2005 MontaVista Software Inc. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __ASM_YUCCA_H__ +#define __ASM_YUCCA_H__ + +#include <linux/config.h> +#include <platforms/4xx/ppc440spe.h> + +/* F/W TLB mapping used in bootloader glue to reset EMAC */ +#define PPC44x_EMAC0_MR0 0xa0000800 + +/* Location of MAC addresses in PIBS image */ +#define PIBS_FLASH_BASE 0xffe00000 +#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0x1b0400) + +/* External timer clock frequency */ +#define YUCCA_TMR_CLK 25000000 + +/* + * FPGA registers + */ +#define YUCCA_FPGA_REG_BASE 0x00000004e2000000ULL +#define YUCCA_FPGA_REG_SIZE 0x24 + +#define FPGA_REG1A 0x1a + +#define FPGA_REG1A_PE0_GLED 0x8000 +#define FPGA_REG1A_PE1_GLED 0x4000 +#define FPGA_REG1A_PE2_GLED 0x2000 +#define FPGA_REG1A_PE0_YLED 0x1000 +#define FPGA_REG1A_PE1_YLED 0x0800 +#define FPGA_REG1A_PE2_YLED 0x0400 +#define FPGA_REG1A_PE0_PWRON 0x0200 +#define FPGA_REG1A_PE1_PWRON 0x0100 +#define FPGA_REG1A_PE2_PWRON 0x0080 +#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040 +#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020 +#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010 +#define FPGA_REG1A_PE_SPREAD0 0x0008 +#define FPGA_REG1A_PE_SPREAD1 0x0004 +#define FPGA_REG1A_PE_SELSOURCE_0 0x0002 +#define FPGA_REG1A_PE_SELSOURCE_1 0x0001 + +#define FPGA_REG1C 0x1c + +#define FPGA_REG1C_PE0_ROOTPOINT 0x8000 +#define FPGA_REG1C_PE1_ENDPOINT 0x4000 +#define FPGA_REG1C_PE2_ENDPOINT 0x2000 +#define FPGA_REG1C_PE0_PRSNT 0x1000 +#define FPGA_REG1C_PE1_PRSNT 0x0800 +#define FPGA_REG1C_PE2_PRSNT 0x0400 +#define FPGA_REG1C_PE0_WAKE 0x0080 +#define FPGA_REG1C_PE1_WAKE 0x0040 +#define FPGA_REG1C_PE2_WAKE 0x0020 +#define FPGA_REG1C_PE0_PERST 0x0010 +#define FPGA_REG1C_PE1_PERST 0x0008 +#define FPGA_REG1C_PE2_PERST 0x0004 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 3 + +/* PIBS defined UART mappings, used before early_serial_setup */ +#define UART0_IO_BASE 0xa0000200 +#define UART1_IO_BASE 0xa0000300 +#define UART2_IO_BASE 0xa0000600 + +#define BASE_BAUD 11059200 +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (void*)UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) \ + STD_UART_OP(2) + +/* PCI support */ +#define YUCCA_PCIX_LOWER_IO 0x00000000 +#define YUCCA_PCIX_UPPER_IO 0x0000ffff +#define YUCCA_PCIX_LOWER_MEM 0x80000000 +#define YUCCA_PCIX_UPPER_MEM 0x8fffffff +#define YUCCA_PCIE_LOWER_MEM 0x90000000 +#define YUCCA_PCIE_MEM_SIZE 0x10000000 + +#define YUCCA_PCIX_MEM_SIZE 0x10000000 +#define YUCCA_PCIX_MEM_OFFSET 0x00000000 +#define YUCCA_PCIE_MEM_SIZE 0x10000000 +#define YUCCA_PCIE_MEM_OFFSET 0x00000000 + +#endif /* __ASM_YUCCA_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 79b3f533d0a3..04bdc39bf47b 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -3,7 +3,7 @@ * * MPC834x SYS board specific routines * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * @@ -51,6 +51,9 @@ #include <syslib/ppc83xx_setup.h> +static const char *GFAR_PHY_0 = "phy0:0"; +static const char *GFAR_PHY_1 = "phy0:1"; + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -70,12 +73,19 @@ mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * A B C D */ { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ - {PIRQD, PIRQA, PIRQB, PIRQC} /* idsel 0x13 */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ + {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x13 */ + {0, 0, 0, 0}, + {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x15 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x16 */ + {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x17 */ + {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x18 */ + {0, 0, 0, 0}, /* idsel 0x19 */ + {0, 0, 0, 0}, /* idsel 0x20 */ }; - const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4; + const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } @@ -97,6 +107,7 @@ mpc834x_sys_setup_arch(void) bd_t *binfo = (bd_t *) __res; unsigned int freq; struct gianfar_platform_data *pdata; + struct gianfar_mdio_data *mdata; /* get the core frequency */ freq = binfo->bi_intfreq; @@ -111,24 +122,27 @@ mpc834x_sys_setup_arch(void) #endif mpc83xx_early_serial_map(); + /* setup the board related info for the MDIO bus */ + mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC83xx_MDIO); + + mdata->irq[0] = MPC83xx_IRQ_EXT1; + mdata->irq[1] = MPC83xx_IRQ_EXT2; + mdata->irq[2] = -1; + mdata->irq[31] = -1; + mdata->paddr += binfo->bi_immr_base; + /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1); if (pdata) { pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC83xx_IRQ_EXT1; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; + pdata->bus_id = GFAR_PHY_0; memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2); if (pdata) { pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC83xx_IRQ_EXT2; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; + pdata->bus_id = GFAR_PHY_1; memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); } diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index 58e44c042535..2e514d316fb8 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -3,7 +3,7 @@ * * MPC834X SYS common board definitions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor, Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 7e952c1228cb..c5cde97c6ef0 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -3,7 +3,7 @@ * * MPC8540ADS board specific routines * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h index 3d05d7c4a938..e48ca3a97397 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.h +++ b/arch/ppc/platforms/85xx/mpc8540_ads.h @@ -3,7 +3,7 @@ * * MPC8540ADS board definitions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h index e0e75568bc57..1a8e6c67355d 100644 --- a/arch/ppc/platforms/85xx/mpc8555_cds.h +++ b/arch/ppc/platforms/85xx/mpc8555_cds.h @@ -3,7 +3,7 @@ * * MPC8555CDS board definitions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index 208433f1e93a..8e39a5517092 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -3,7 +3,7 @@ * * MPC8560ADS board specific routines * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h index 7df885d73e9d..143ae7eefa7c 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.h +++ b/arch/ppc/platforms/85xx/mpc8560_ads.h @@ -3,7 +3,7 @@ * * MPC8540ADS board definitions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index bd3ac0136756..17ce48fe3503 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -3,7 +3,7 @@ * * MPC85xx ADS board common routines * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * @@ -45,6 +45,8 @@ #include <mm/mmu_decl.h> +#include <syslib/ppc85xx_rio.h> + #include <platforms/85xx/mpc85xx_ads_common.h> #ifndef CONFIG_PCI @@ -189,3 +191,11 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) } #endif /* CONFIG_PCI */ + +#ifdef CONFIG_RAPIDIO +void platform_rio_init(void) +{ + /* 512MB RIO LAW at 0xc0000000 */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index 84acf6e8d45e..198a6a02cde8 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -3,7 +3,7 @@ * * MPC85XX ADS common board definitions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * @@ -25,6 +25,8 @@ #define BCSR_ADDR ((uint)0xf8000000) #define BCSR_SIZE ((uint)(32 * 1024)) +struct seq_file; + extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m); extern void mpc85xx_ads_init_IRQ(void) __init; extern void mpc85xx_ads_map_io(void) __init; diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index a21156967a5e..d8991b88dc9c 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -3,7 +3,7 @@ * * MPC85xx CDS board specific routines * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor, Inc * diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 12b292c6ae32..5b588cfd0e41 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -3,7 +3,7 @@ * * MPC85xx CDS board definitions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor, Inc * diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index b4ee1707a836..45a5b81b4ed1 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -3,7 +3,7 @@ * * Wind River SBC8560 board specific routines * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 1e1b85f8193a..15ce9d070634 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -37,6 +37,7 @@ #include <linux/module.h> #include <linux/fsl_devices.h> #include <linux/interrupt.h> +#include <linux/rio.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -57,6 +58,7 @@ #include <syslib/cpm2_pic.h> #include <syslib/ppc85xx_common.h> +#include <syslib/ppc85xx_rio.h> unsigned char __res[sizeof(bd_t)]; @@ -273,6 +275,18 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn) } #endif /* CONFIG_PCI */ +#ifdef CONFIG_RAPIDIO +void +platform_rio_init(void) +{ + /* + * The STx firmware configures the RapidIO Local Access Window + * at 0xc0000000 with a size of 512MB. + */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ + void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 95fdf4b0680b..2f25b5195152 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -42,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init; extern void mpc85xx_restart(char *cmd); extern void mpc85xx_power_off(void); extern void mpc85xx_halt(void); -extern int mpc85xx_show_cpuinfo(struct seq_file *m); extern void mpc85xx_init_IRQ(void) __init; extern unsigned long mpc85xx_find_end_of_memory(void) __init; extern void mpc85xx_calibrate_decr(void) __init; diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index b1324564456e..b9d844f88c2b 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -52,6 +52,8 @@ static u32 ev64360_bus_frequency; unsigned char __res[sizeof(bd_t)]; +TODC_ALLOC(); + static int __init ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { @@ -182,6 +184,9 @@ ev64360_setup_peripherals(void) EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN); + TODC_INIT(TODC_TYPE_DS1501, 0, 0, + ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8); + mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN, EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN); @@ -496,6 +501,13 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.power_off = ev64360_power_off; ppc_md.halt = ev64360_halt; ppc_md.find_end_of_memory = ev64360_find_end_of_memory; + ppc_md.init = NULL; + + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; ppc_md.calibrate_decr = ev64360_calibrate_decr; #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) diff --git a/arch/ppc/platforms/pmac_feature.c b/arch/ppc/platforms/pmac_feature.c index 58884a63ebdb..1e69b0593162 100644 --- a/arch/ppc/platforms/pmac_feature.c +++ b/arch/ppc/platforms/pmac_feature.c @@ -2317,6 +2317,14 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, + { "PowerBook5,8", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,9", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, { "PowerBook6,1", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, diff --git a/arch/ppc/platforms/pmac_pic.c b/arch/ppc/platforms/pmac_pic.c index 9f2d95ea8564..4742bf609357 100644 --- a/arch/ppc/platforms/pmac_pic.c +++ b/arch/ppc/platforms/pmac_pic.c @@ -75,6 +75,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; + /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c index 6a1475c1e128..71c9fca1fe9b 100644 --- a/arch/ppc/platforms/pq2ads.c +++ b/arch/ppc/platforms/pq2ads.c @@ -3,7 +3,7 @@ * * PQ2ADS platform support * - * Author: Kumar Gala <kumar.gala@freescale.com> + * Author: Kumar Gala <galak@kernel.crashing.org> * Derived from: est8260_setup.c by Allen Curtis * * Copyright 2004 Freescale Semiconductor, Inc. diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index 067d7d53b81e..4415748071dc 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -61,6 +61,15 @@ #include <asm/pci-bridge.h> #include <asm/todc.h> +/* prep registers for L2 */ +#define CACHECRBA 0x80000823 /* Cache configuration register address */ +#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ +#define L2CACHE_512KB 0x00 /* 512KB */ +#define L2CACHE_256KB 0x01 /* 256KB */ +#define L2CACHE_1MB 0x02 /* 1MB */ +#define L2CACHE_NONE 0x03 /* NONE */ +#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */ + TODC_ALLOC(); unsigned char ucSystemType; diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index b4ef15b45c4a..5b7f2b80e56e 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_440EP) += ibm440gx_common.o obj-$(CONFIG_440GP) += ibm440gp_common.o obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o +obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o ifeq ($(CONFIG_4xx),y) ifeq ($(CONFIG_VIRTEX_II_PRO),y) obj-$(CONFIG_40x) += xilinx_pic.o @@ -46,12 +47,14 @@ obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_EBONY) += pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o +obj-$(CONFIG_EV64360) += todc_time.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o obj-$(CONFIG_GEMINI) += open_pic.o obj-$(CONFIG_GT64260) += gt64260_pic.o obj-$(CONFIG_LOPEC) += pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o obj-$(CONFIG_LUAN) += pci_auto.o todc_time.o +obj-$(CONFIG_YUCCA) += pci_auto.o todc_time.o obj-$(CONFIG_KATANA) += pci_auto.o obj-$(CONFIG_MV64360) += mv64360_pic.o obj-$(CONFIG_MV64X60) += mv64x60.o mv64x60_win.o @@ -92,6 +95,7 @@ obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += pci_auto.o endif +obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \ mpc83xx_sys.o mpc83xx_devices.o ifeq ($(CONFIG_83xx),y) diff --git a/arch/ppc/syslib/cpm2_pic.c b/arch/ppc/syslib/cpm2_pic.c index c867be6981cb..29d95d415ceb 100644 --- a/arch/ppc/syslib/cpm2_pic.c +++ b/arch/ppc/syslib/cpm2_pic.c @@ -37,7 +37,7 @@ static u_char irq_to_siureg[] = { static u_char irq_to_siubit[] = { 0, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, - 2, 1, 15, 14, 13, 12, 11, 10, + 2, 1, 0, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 0, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c index 417d4cff77a0..cdafda127d81 100644 --- a/arch/ppc/syslib/ibm440sp_common.c +++ b/arch/ppc/syslib/ibm440sp_common.c @@ -1,7 +1,7 @@ /* * arch/ppc/syslib/ibm440sp_common.c * - * PPC440SP system library + * PPC440SP/PPC440SPe system library * * Matt Porter <mporter@kernel.crashing.org> * Copyright 2002-2005 MontaVista Software Inc. @@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_of_memory(void) u32 mem_size = 0; /* Read two bank sizes and sum */ - for (i=0; i<2; i++) + for (i=0; i< MQ0_NUM_BANKS; i++) switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) { case MQ0_CONFIG_SIZE_8M: mem_size += PPC44x_MEM_SIZE_8M; diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c index 5152c8e41340..71db11d22158 100644 --- a/arch/ppc/syslib/ibm44x_common.c +++ b/arch/ppc/syslib/ibm44x_common.c @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/serial.h> #include <linux/module.h> +#include <linux/initrd.h> #include <asm/ibm44x.h> #include <asm/mmu.h> @@ -214,9 +215,20 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo /* Called from machine_check_exception */ void platform_machine_check(struct pt_regs *regs) { +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) + printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", + mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), + mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH), + mfdcr(DCRN_PLB0_BESRL)); + printk("PLB1: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", + mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL), + mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH), + mfdcr(DCRN_PLB1_BESRL)); +#else printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x\n", mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESR)); +#endif printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n", mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL), mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1)); diff --git a/arch/ppc/syslib/ipic.h b/arch/ppc/syslib/ipic.h index 2b56a4fcf373..a7ce7da8785c 100644 --- a/arch/ppc/syslib/ipic.h +++ b/arch/ppc/syslib/ipic.h @@ -3,7 +3,7 @@ * * IPIC private definitions and structure. * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor, Inc * diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c index c5ac5ce5d7d2..a21632d37e5a 100644 --- a/arch/ppc/syslib/m8xx_wdt.c +++ b/arch/ppc/syslib/m8xx_wdt.c @@ -14,6 +14,7 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <asm/io.h> #include <asm/8xx_immap.h> #include <syslib/m8xx_wdt.h> @@ -29,8 +30,8 @@ void m8xx_wdt_reset(void) { volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; - out_be16(imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */ - out_be16(imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */ + out_be16(&imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */ + out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */ } static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) @@ -39,7 +40,7 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) m8xx_wdt_reset(); - out_be16(imap->im_sit.sit_piscr, in_be16(imap->im_sit.sit_piscr | PISCR_PS)); /* clear irq */ + out_be16(&imap->im_sit.sit_piscr, in_be16(&imap->im_sit.sit_piscr) | PISCR_PS); /* clear irq */ return IRQ_HANDLED; } @@ -51,7 +52,7 @@ void __init m8xx_wdt_handler_install(bd_t * binfo) u32 sypcr; u32 pitrtclk; - sypcr = in_be32(imap->im_siu_conf.sc_sypcr); + sypcr = in_be32(&imap->im_siu_conf.sc_sypcr); if (!(sypcr & 0x04)) { printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n", @@ -87,9 +88,9 @@ void __init m8xx_wdt_handler_install(bd_t * binfo) else pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2; - out_be32(imap->im_sit.sit_pitc, pitc << 16); + out_be32(&imap->im_sit.sit_pitc, pitc << 16); - out_be16(imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE); + out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE); if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction)) panic("m8xx_wdt: error setting up the watchdog irq!"); diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index dbf8acac507f..847df4409982 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -3,7 +3,7 @@ * * MPC83xx Device descriptions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * @@ -27,18 +27,20 @@ * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup */ +struct gianfar_mdio_data mpc83xx_mdio_pdata = { + .paddr = 0x24520, +}; + static struct gianfar_platform_data mpc83xx_tsec1_pdata = { .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | FSL_GIANFAR_DEV_HAS_MULTI_INTR, - .phy_reg_addr = 0x24000, }; static struct gianfar_platform_data mpc83xx_tsec2_pdata = { .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | FSL_GIANFAR_DEV_HAS_MULTI_INTR, - .phy_reg_addr = 0x24000, }; static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = { @@ -220,6 +222,12 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, + [MPC83xx_MDIO] = { + .name = "fsl-gianfar_mdio", + .id = 0, + .dev.platform_data = &mpc83xx_mdio_pdata, + .num_resources = 0, + }, }; static int __init mach_mpc83xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index 29aa63350025..a1523989aff4 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -3,7 +3,7 @@ * * MPC83xx System descriptions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * @@ -24,72 +24,72 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8349E", .mask = 0xFFFF0000, .value = 0x80500000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8349", .mask = 0xFFFF0000, .value = 0x80510000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8347E", .mask = 0xFFFF0000, .value = 0x80520000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8347", .mask = 0xFFFF0000, .value = 0x80530000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8343E", .mask = 0xFFFF0000, .value = 0x80540000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, + MPC83xx_USB2_DR, MPC83xx_MDIO }, }, { .ppc_sys_name = "8343", .mask = 0xFFFF0000, .value = 0x80550000, - .num_devices = 6, + .num_devices = 7, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, + MPC83xx_USB2_DR, MPC83xx_MDIO }, }, { /* default match */ diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 2ede677a0a53..69949d255658 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -3,7 +3,7 @@ * * MPC85xx Device descriptions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c index cb68d8c58348..397cfbcce5ea 100644 --- a/arch/ppc/syslib/mpc85xx_sys.c +++ b/arch/ppc/syslib/mpc85xx_sys.c @@ -3,7 +3,7 @@ * * MPC85xx System descriptions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 2b5f0e701687..92dc98b36bde 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -3,7 +3,7 @@ * * MPC8xx Device descriptions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<vbordug@ru.mvista.com> * diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c index 3cc27d29e3af..d3c617521603 100644 --- a/arch/ppc/syslib/mpc8xx_sys.c +++ b/arch/ppc/syslib/mpc8xx_sys.c @@ -3,7 +3,7 @@ * * MPC8xx System descriptions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com> * diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c index 81c83bf98df4..d6d838b16dac 100644 --- a/arch/ppc/syslib/ppc405_pci.c +++ b/arch/ppc/syslib/ppc405_pci.c @@ -89,13 +89,6 @@ ppc4xx_find_bridges(void) isa_mem_base = 0; pci_dram_offset = 0; -#if (PSR_PCI_ARBIT_EN > 1) - /* Check if running in slave mode */ - if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) { - printk("Running as PCI slave, kernel PCI disabled !\n"); - return; - } -#endif /* Setup PCI32 hose */ hose_a = pcibios_alloc_controller(); if (!hose_a) diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c new file mode 100644 index 000000000000..1509fc1ddfb6 --- /dev/null +++ b/arch/ppc/syslib/ppc440spe_pcie.c @@ -0,0 +1,442 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier <rolandd@cisco.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/reg.h> +#include <asm/io.h> +#include <asm/ibm44x.h> + +#include "ppc440spe_pcie.h" + +static int +pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + + if (PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset += devfn << 12; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(hose->cfg_data + offset); + break; + case 2: + *val = in_le16(hose->cfg_data + offset); + break; + default: + *val = in_le32(hose->cfg_data + offset); + break; + } + + if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset); + + return PCIBIOS_SUCCESSFUL; +} + +static int +pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + + if (PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset += devfn << 12; + + switch (len) { + case 1: + out_8(hose->cfg_data + offset, val); + break; + case 2: + out_le16(hose->cfg_data + offset, val); + break; + default: + out_le32(hose->cfg_data + offset, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pcie_pci_ops = +{ + .read = pcie_read_config, + .write = pcie_write_config +}; + +enum { + PTYPE_ENDPOINT = 0x0, + PTYPE_LEGACY_ENDPOINT = 0x1, + PTYPE_ROOT_PORT = 0x4, + + LNKW_X1 = 0x1, + LNKW_X4 = 0x4, + LNKW_X8 = 0x8 +}; + +static void check_error(void) +{ + u32 valPE0, valPE1, valPE2; + + /* SDR0_PEGPLLLCT1 reset */ + if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0); + } + + valPE0 = SDR_READ(PESDR0_RCSSET); + valPE1 = SDR_READ(PESDR1_RCSSET); + valPE2 = SDR_READ(PESDR2_RCSSET); + + /* SDR0_PExRCSSET rstgu */ + if ( !(valPE0 & 0x01000000) || + !(valPE1 & 0x01000000) || + !(valPE2 & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n"); + } + + /* SDR0_PExRCSSET rstdl */ + if ( !(valPE0 & 0x00010000) || + !(valPE1 & 0x00010000) || + !(valPE2 & 0x00010000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n"); + } + + /* SDR0_PExRCSSET rstpyn */ + if ( (valPE0 & 0x00001000) || + (valPE1 & 0x00001000) || + (valPE2 & 0x00001000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n"); + } + + /* SDR0_PExRCSSET hldplb */ + if ( (valPE0 & 0x10000000) || + (valPE1 & 0x10000000) || + (valPE2 & 0x10000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n"); + } + + /* SDR0_PExRCSSET rdy */ + if ( (valPE0 & 0x00100000) || + (valPE1 & 0x00100000) || + (valPE2 & 0x00100000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n"); + } + + /* SDR0_PExRCSSET shutdown */ + if ( (valPE0 & 0x00000100) || + (valPE1 & 0x00000100) || + (valPE2 & 0x00000100)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n"); + } +} + +/* + * Initialize PCI Express core as described in User Manual section 27.12.1 + */ +int ppc440spe_init_pcie(void) +{ + /* Set PLL clock receiver to LVPECL */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28); + + check_error(); + + printk(KERN_INFO "PCIE initialization OK\n"); + + if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) + printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n", + SDR_READ(PESDR0_PLLLCT2)); + + /* De-assert reset of PCIe PLL, wait for lock */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24)); + udelay(3); + + return 0; +} + +int ppc440spe_init_pcie_rootport(int port) +{ + static int core_init; + void __iomem *utl_base; + u32 val = 0; + int i; + + if (!core_init) { + ++core_init; + i = ppc440spe_init_pcie(); + if (i) + return i; + } + + /* + * Initialize various parts of the PCI Express core for our port: + * + * - Set as a root port and enable max width + * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4). + * - Set up UTL configuration. + * - Increase SERDES drive strength to levels suggested by AMCC. + * - De-assert RSTPYN, RSTDL and RSTGU. + */ + switch (port) { + case 0: + SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12); + + SDR_WRITE(PESDR0_UTLSET1, 0x21222222); + SDR_WRITE(PESDR0_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000); + + SDR_WRITE(PESDR0_RCSSET, + (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 1: + SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12); + + SDR_WRITE(PESDR1_UTLSET1, 0x21222222); + SDR_WRITE(PESDR1_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000); + + SDR_WRITE(PESDR1_RCSSET, + (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 2: + SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12); + + SDR_WRITE(PESDR2_UTLSET1, 0x21222222); + SDR_WRITE(PESDR2_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000); + + SDR_WRITE(PESDR2_RCSSET, + (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + } + + mdelay(1000); + + switch (port) { + case 0: val = SDR_READ(PESDR0_RCSSTS); break; + case 1: val = SDR_READ(PESDR1_RCSSTS); break; + case 2: val = SDR_READ(PESDR2_RCSSTS); break; + } + + if (!(val & (1 << 20))) + printk(KERN_INFO "PCIE%d: PGRST inactive\n", port); + else + printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val); + + switch (port) { + case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break; + case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break; + case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break; + } + + /* + * Map UTL registers at 0xc_1000_0n00 + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800); + break; + + case 1: + mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800); + break; + + case 2: + mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800); + } + + utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(utl_base + PEUTL_INTR, 0x02000000); + out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_PBBSZ, 0x53000000); + out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000); + out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(utl_base + PEUTL_PCTL, 0x80800066); + + iounmap(utl_base); + + /* + * We map PCI Express configuration access into the 512MB regions + * PCIE0: 0xc_4000_0000 + * PCIE1: 0xc_8000_0000 + * PCIE2: 0xc_c000_0000 + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */ + break; + + case 1: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */ + break; + + case 2: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */ + break; + } + + /* + * Check for VC0 active and assert RDY. + */ + switch (port) { + case 0: + if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20); + break; + case 1: + if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20); + break; + case 2: + if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20); + break; + } + +#if 0 + /* Dump all config regs */ + for (i = 0x300; i <= 0x320; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x340; i <= 0x353; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x370; i <= 0x383; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x3a0; i <= 0x3a2; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x3c0; i <= 0x3c3; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); +#endif + + mdelay(100); + + return 0; +} + +void ppc440spe_setup_pcie(struct pci_controller *hose, int port) +{ + void __iomem *mbase; + + /* + * Map 16MB, which is enough for 4 bits of bus # + */ + hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000, + 1 << 24); + hose->ops = &pcie_pci_ops; + + /* + * Set bus numbers on our root port + */ + mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096); + out_8(mbase + PCI_PRIMARY_BUS, 0); + out_8(mbase + PCI_SECONDARY_BUS, 0); + + /* + * Set up outbound translation to hose->mem_space from PLB + * addresses at an offset of 0xd_0000_0000. We set the low + * bits of the mask to 11 to turn off splitting into 8 + * subregions and to enable the outbound translation. + */ + out_le32(mbase + PECFG_POM0LAH, 0); + out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start); + + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + break; + case 1: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + + break; + case 2: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + break; + } + + /* Set up 16GB inbound memory window at 0 */ + out_le32(mbase + PCI_BASE_ADDRESS_0, 0); + out_le32(mbase + PCI_BASE_ADDRESS_1, 0); + out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc); + out_le32(mbase + PECFG_BAR0LMPA, 0); + out_le32(mbase + PECFG_PIM0LAL, 0); + out_le32(mbase + PECFG_PIM0LAH, 0); + out_le32(mbase + PECFG_PIMEN, 0x1); + + /* Enable I/O, Mem, and Busmaster cycles */ + out_le16(mbase + PCI_COMMAND, + in_le16(mbase + PCI_COMMAND) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + iounmap(mbase); +} diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h new file mode 100644 index 000000000000..55b765ad3272 --- /dev/null +++ b/arch/ppc/syslib/ppc440spe_pcie.h @@ -0,0 +1,149 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier <rolandd@cisco.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H +#define __PPC_SYSLIB_PPC440SPE_PCIE_H + +#define DCRN_SDR0_CFGADDR 0x00e +#define DCRN_SDR0_CFGDATA 0x00f + +#define DCRN_PCIE0_BASE 0x100 +#define DCRN_PCIE1_BASE 0x120 +#define DCRN_PCIE2_BASE 0x140 +#define PCIE0 DCRN_PCIE0_BASE +#define PCIE1 DCRN_PCIE1_BASE +#define PCIE2 DCRN_PCIE2_BASE + +#define DCRN_PEGPL_CFGBAH(base) (base + 0x00) +#define DCRN_PEGPL_CFGBAL(base) (base + 0x01) +#define DCRN_PEGPL_CFGMSK(base) (base + 0x02) +#define DCRN_PEGPL_MSGBAH(base) (base + 0x03) +#define DCRN_PEGPL_MSGBAL(base) (base + 0x04) +#define DCRN_PEGPL_MSGMSK(base) (base + 0x05) +#define DCRN_PEGPL_OMR1BAH(base) (base + 0x06) +#define DCRN_PEGPL_OMR1BAL(base) (base + 0x07) +#define DCRN_PEGPL_OMR1MSKH(base) (base + 0x08) +#define DCRN_PEGPL_OMR1MSKL(base) (base + 0x09) +#define DCRN_PEGPL_REGBAH(base) (base + 0x12) +#define DCRN_PEGPL_REGBAL(base) (base + 0x13) +#define DCRN_PEGPL_REGMSK(base) (base + 0x14) +#define DCRN_PEGPL_SPECIAL(base) (base + 0x15) + +/* + * System DCRs (SDRs) + */ +#define PESDR0_PLLLCT1 0x03a0 +#define PESDR0_PLLLCT2 0x03a1 +#define PESDR0_PLLLCT3 0x03a2 + +#define PESDR0_UTLSET1 0x0300 +#define PESDR0_UTLSET2 0x0301 +#define PESDR0_DLPSET 0x0302 +#define PESDR0_LOOP 0x0303 +#define PESDR0_RCSSET 0x0304 +#define PESDR0_RCSSTS 0x0305 +#define PESDR0_HSSL0SET1 0x0306 +#define PESDR0_HSSL0SET2 0x0307 +#define PESDR0_HSSL0STS 0x0308 +#define PESDR0_HSSL1SET1 0x0309 +#define PESDR0_HSSL1SET2 0x030a +#define PESDR0_HSSL1STS 0x030b +#define PESDR0_HSSL2SET1 0x030c +#define PESDR0_HSSL2SET2 0x030d +#define PESDR0_HSSL2STS 0x030e +#define PESDR0_HSSL3SET1 0x030f +#define PESDR0_HSSL3SET2 0x0310 +#define PESDR0_HSSL3STS 0x0311 +#define PESDR0_HSSL4SET1 0x0312 +#define PESDR0_HSSL4SET2 0x0313 +#define PESDR0_HSSL4STS 0x0314 +#define PESDR0_HSSL5SET1 0x0315 +#define PESDR0_HSSL5SET2 0x0316 +#define PESDR0_HSSL5STS 0x0317 +#define PESDR0_HSSL6SET1 0x0318 +#define PESDR0_HSSL6SET2 0x0319 +#define PESDR0_HSSL6STS 0x031a +#define PESDR0_HSSL7SET1 0x031b +#define PESDR0_HSSL7SET2 0x031c +#define PESDR0_HSSL7STS 0x031d +#define PESDR0_HSSCTLSET 0x031e +#define PESDR0_LANE_ABCD 0x031f +#define PESDR0_LANE_EFGH 0x0320 + +#define PESDR1_UTLSET1 0x0340 +#define PESDR1_UTLSET2 0x0341 +#define PESDR1_DLPSET 0x0342 +#define PESDR1_LOOP 0x0343 +#define PESDR1_RCSSET 0x0344 +#define PESDR1_RCSSTS 0x0345 +#define PESDR1_HSSL0SET1 0x0346 +#define PESDR1_HSSL0SET2 0x0347 +#define PESDR1_HSSL0STS 0x0348 +#define PESDR1_HSSL1SET1 0x0349 +#define PESDR1_HSSL1SET2 0x034a +#define PESDR1_HSSL1STS 0x034b +#define PESDR1_HSSL2SET1 0x034c +#define PESDR1_HSSL2SET2 0x034d +#define PESDR1_HSSL2STS 0x034e +#define PESDR1_HSSL3SET1 0x034f +#define PESDR1_HSSL3SET2 0x0350 +#define PESDR1_HSSL3STS 0x0351 +#define PESDR1_HSSCTLSET 0x0352 +#define PESDR1_LANE_ABCD 0x0353 + +#define PESDR2_UTLSET1 0x0370 +#define PESDR2_UTLSET2 0x0371 +#define PESDR2_DLPSET 0x0372 +#define PESDR2_LOOP 0x0373 +#define PESDR2_RCSSET 0x0374 +#define PESDR2_RCSSTS 0x0375 +#define PESDR2_HSSL0SET1 0x0376 +#define PESDR2_HSSL0SET2 0x0377 +#define PESDR2_HSSL0STS 0x0378 +#define PESDR2_HSSL1SET1 0x0379 +#define PESDR2_HSSL1SET2 0x037a +#define PESDR2_HSSL1STS 0x037b +#define PESDR2_HSSL2SET1 0x037c +#define PESDR2_HSSL2SET2 0x037d +#define PESDR2_HSSL2STS 0x037e +#define PESDR2_HSSL3SET1 0x037f +#define PESDR2_HSSL3SET2 0x0380 +#define PESDR2_HSSL3STS 0x0381 +#define PESDR2_HSSCTLSET 0x0382 +#define PESDR2_LANE_ABCD 0x0383 + +/* + * UTL register offsets + */ +#define PEUTL_PBBSZ 0x20 +#define PEUTL_OPDBSZ 0x68 +#define PEUTL_IPHBSZ 0x70 +#define PEUTL_IPDBSZ 0x78 +#define PEUTL_OUTTR 0x90 +#define PEUTL_INTR 0x98 +#define PEUTL_PCTL 0xa0 +#define PEUTL_RCIRQEN 0xb8 + +/* + * Config space register offsets + */ +#define PECFG_BAR0LMPA 0x210 +#define PECFG_BAR0HMPA 0x214 +#define PECFG_PIMEN 0x33c +#define PECFG_PIM0LAL 0x340 +#define PECFG_PIM0LAH 0x344 +#define PECFG_POM0LAL 0x380 +#define PECFG_POM0LAH 0x384 + +int ppc440spe_init_pcie(void); +int ppc440spe_init_pcie_rootport(int port); +void ppc440spe_setup_pcie(struct pci_controller *hose, int port); + +#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */ diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c index 0b435633a0d1..aa4165144ec2 100644 --- a/arch/ppc/syslib/ppc4xx_pic.c +++ b/arch/ppc/syslib/ppc4xx_pic.c @@ -38,6 +38,7 @@ extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak)); #define IRQ_MASK_UICx(irq) (1 << (31 - ((irq) & 0x1f))) #define IRQ_MASK_UIC1(irq) IRQ_MASK_UICx(irq) #define IRQ_MASK_UIC2(irq) IRQ_MASK_UICx(irq) +#define IRQ_MASK_UIC3(irq) IRQ_MASK_UICx(irq) #define UIC_HANDLERS(n) \ static void ppc4xx_uic##n##_enable(unsigned int irq) \ @@ -88,7 +89,38 @@ static void ppc4xx_uic##n##_end(unsigned int irq) \ .end = ppc4xx_uic##n##_end, \ } \ -#if NR_UICS == 3 +#if NR_UICS == 4 +#define ACK_UIC0_PARENT +#define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC); +#define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC); +#define ACK_UIC3_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC); +UIC_HANDLERS(0); +UIC_HANDLERS(1); +UIC_HANDLERS(2); +UIC_HANDLERS(3); + +static int ppc4xx_pic_get_irq(struct pt_regs *regs) +{ + u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0)); + if (uic0 & UIC0_UIC1NC) + return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1))); + else if (uic0 & UIC0_UIC2NC) + return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2))); + else if (uic0 & UIC0_UIC3NC) + return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3))); + else + return uic0 ? 32 - ffs(uic0) : -1; +} + +static void __init ppc4xx_pic_impl_init(void) +{ + /* Enable cascade interrupts in UIC0 */ + ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC; + mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC); + mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]); +} + +#elif NR_UICS == 3 #define ACK_UIC0_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC); #define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC); #define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC); @@ -170,6 +202,9 @@ static struct ppc4xx_uic_impl { { .decl = DECLARE_UIC(1), .base = UIC1 }, #if NR_UICS > 2 { .decl = DECLARE_UIC(2), .base = UIC2 }, +#if NR_UICS > 3 + { .decl = DECLARE_UIC(3), .base = UIC3 }, +#endif #endif #endif }; diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index 4da168a6ad03..1b5fe9e398d4 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -3,7 +3,7 @@ * * MPC83XX common board code * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h index c766c1a5f786..a122a7322e5e 100644 --- a/arch/ppc/syslib/ppc83xx_setup.h +++ b/arch/ppc/syslib/ppc83xx_setup.h @@ -3,7 +3,7 @@ * * MPC83XX common board definitions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c index da841dacdc13..19ad537225e4 100644 --- a/arch/ppc/syslib/ppc85xx_common.c +++ b/arch/ppc/syslib/ppc85xx_common.c @@ -3,7 +3,7 @@ * * MPC85xx support routines * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h index 2c8f304441bf..94edf32151dd 100644 --- a/arch/ppc/syslib/ppc85xx_common.h +++ b/arch/ppc/syslib/ppc85xx_common.h @@ -3,7 +3,7 @@ * * MPC85xx support routines * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c new file mode 100644 index 000000000000..297f3b549177 --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -0,0 +1,938 @@ +/* + * MPC85xx RapidIO support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> + +#include <asm/io.h> + +#define RIO_REGS_BASE (CCSRBAR + 0xc0000) +#define RIO_ATMU_REGS_OFFSET 0x10c00 +#define RIO_MSG_REGS_OFFSET 0x11000 +#define RIO_MAINT_WIN_SIZE 0x400000 +#define RIO_DBELL_WIN_SIZE 0x1000 + +#define RIO_MSG_OMR_MUI 0x00000002 +#define RIO_MSG_OSR_TE 0x00000080 +#define RIO_MSG_OSR_QOI 0x00000020 +#define RIO_MSG_OSR_QFI 0x00000010 +#define RIO_MSG_OSR_MUB 0x00000004 +#define RIO_MSG_OSR_EOMI 0x00000002 +#define RIO_MSG_OSR_QEI 0x00000001 + +#define RIO_MSG_IMR_MI 0x00000002 +#define RIO_MSG_ISR_TE 0x00000080 +#define RIO_MSG_ISR_QFI 0x00000010 +#define RIO_MSG_ISR_DIQI 0x00000001 + +#define RIO_MSG_DESC_SIZE 32 +#define RIO_MSG_BUFFER_SIZE 4096 +#define RIO_MIN_TX_RING_SIZE 2 +#define RIO_MAX_TX_RING_SIZE 2048 +#define RIO_MIN_RX_RING_SIZE 2 +#define RIO_MAX_RX_RING_SIZE 2048 + +#define DOORBELL_DMR_DI 0x00000002 +#define DOORBELL_DSR_TE 0x00000080 +#define DOORBELL_DSR_QFI 0x00000010 +#define DOORBELL_DSR_DIQI 0x00000001 +#define DOORBELL_TID_OFFSET 0x03 +#define DOORBELL_SID_OFFSET 0x05 +#define DOORBELL_INFO_OFFSET 0x06 + +#define DOORBELL_MESSAGE_SIZE 0x08 +#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET)) +#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) +#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) + +#define is_power_of_2(x) (((x) & ((x) - 1)) == 0) + +struct rio_atmu_regs { + u32 rowtar; + u32 pad1; + u32 rowbar; + u32 pad2; + u32 rowar; + u32 pad3[3]; +}; + +struct rio_msg_regs { + u32 omr; + u32 osr; + u32 pad1; + u32 odqdpar; + u32 pad2; + u32 osar; + u32 odpr; + u32 odatr; + u32 odcr; + u32 pad3; + u32 odqepar; + u32 pad4[13]; + u32 imr; + u32 isr; + u32 pad5; + u32 ifqdpar; + u32 pad6; + u32 ifqepar; + u32 pad7[250]; + u32 dmr; + u32 dsr; + u32 pad8; + u32 dqdpar; + u32 pad9; + u32 dqepar; + u32 pad10[26]; + u32 pwmr; + u32 pwsr; + u32 pad11; + u32 pwqbar; +}; + +struct rio_tx_desc { + u32 res1; + u32 saddr; + u32 dport; + u32 dattr; + u32 res2; + u32 res3; + u32 dwcnt; + u32 res4; +}; + +static u32 regs_win; +static struct rio_atmu_regs *atmu_regs; +static struct rio_atmu_regs *maint_atmu_regs; +static struct rio_atmu_regs *dbell_atmu_regs; +static u32 dbell_win; +static u32 maint_win; +static struct rio_msg_regs *msg_regs; + +static struct rio_dbell_ring { + void *virt; + dma_addr_t phys; +} dbell_ring; + +static struct rio_msg_tx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_TX_RING_SIZE]; + dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; + int tx_slot; + int size; + void *dev_id; +} msg_tx_ring; + +static struct rio_msg_rx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_RX_RING_SIZE]; + int rx_slot; + int size; + void *dev_id; +} msg_rx_ring; + +/** + * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell message + * + * Sends a MPC85xx doorbell message. Returns %0 on success or + * %-EINVAL on failure. + */ +static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) +{ + pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n", + index, destid, data); + out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22); + out_be16((void *)(dbell_win), data); + + return 0; +} + +/** + * mpc85xx_local_config_read - Generate a MPC85xx local config space read + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be read into + * + * Generates a MPC85xx local configuration space read. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) +{ + pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index, + offset); + *data = in_be32((void *)(regs_win + offset)); + + return 0; +} + +/** + * mpc85xx_local_config_write - Generate a MPC85xx local config space write + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be written + * + * Generates a MPC85xx local configuration space write. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) +{ + pr_debug + ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n", + index, offset, data); + out_be32((void *)(regs_win + offset), data); + + return 0; +} + +/** + * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Location to be read into + * + * Generates a MPC85xx read maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, + u32 * val) +{ + u8 *data; + + pr_debug + ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", + index, destid, hopcount, offset, len); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + *val = in_8((u8 *) data); + break; + case 2: + *val = in_be16((u16 *) data); + break; + default: + *val = in_be32((u32 *) data); + break; + } + + return 0; +} + +/** + * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Value to be written + * + * Generates an MPC85xx write maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset, + int len, u32 val) +{ + u8 *data; + pr_debug + ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", + index, destid, hopcount, offset, len, val); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + out_8((u8 *) data, val); + break; + case 2: + out_be16((u16 *) data, val); + break; + default: + out_be32((u32 *) data, val); + break; + } + + return 0; +} + +/** + * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue + * @mport: Master port with outbound message queue + * @rdev: Target of outbound message + * @mbox: Outbound mailbox + * @buffer: Message to add to outbound queue + * @len: Length of message + * + * Adds the @buffer message to the MPC85xx outbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int +rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, + void *buffer, size_t len) +{ + u32 omr; + struct rio_tx_desc *desc = + (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot; + int ret = 0; + + pr_debug + ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n", + rdev->destid, mbox, (int)buffer, len); + + if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { + ret = -EINVAL; + goto out; + } + + /* Copy and clear rest of buffer */ + memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len); + if (len < (RIO_MAX_MSG_SIZE - 4)) + memset((void *)((u32) msg_tx_ring. + virt_buffer[msg_tx_ring.tx_slot] + len), 0, + RIO_MAX_MSG_SIZE - len); + + /* Set mbox field for message */ + desc->dport = mbox & 0x3; + + /* Enable EOMI interrupt, set priority, and set destid */ + desc->dattr = 0x28000000 | (rdev->destid << 2); + + /* Set transfer size aligned to next power of 2 (in double words) */ + desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); + + /* Set snooping and source buffer address */ + desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot]; + + /* Increment enqueue pointer */ + omr = in_be32((void *)&msg_regs->omr); + out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI); + + /* Go to next descriptor */ + if (++msg_tx_ring.tx_slot == msg_tx_ring.size) + msg_tx_ring.tx_slot = 0; + + out: + return ret; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); + +/** + * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles outbound message interrupts. Executes a register outbound + * mailbox event handler and acks the interrupt occurence. + */ +static irqreturn_t +mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int osr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + osr = in_be32((void *)&msg_regs->osr); + + if (osr & RIO_MSG_OSR_TE) { + pr_info("RIO: outbound message transmission error\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE); + goto out; + } + + if (osr & RIO_MSG_OSR_QOI) { + pr_info("RIO: outbound message queue overflow\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI); + goto out; + } + + if (osr & RIO_MSG_OSR_EOMI) { + u32 dqp = in_be32((void *)&msg_regs->odqdpar); + int slot = (dqp - msg_tx_ring.phys) >> 5; + port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot); + + /* Ack the end-of-message interrupt */ + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the outbound mailbox ring + * + * Initializes buffer ring, request the outbound message interrupt, + * and enables the outbound message unit. Returns %0 on success and + * %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, j, rc = 0; + + if ((entries < RIO_MIN_TX_RING_SIZE) || + (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize shadow copy ring */ + msg_tx_ring.dev_id = dev_id; + msg_tx_ring.size = entries; + + for (i = 0; i < msg_tx_ring.size; i++) { + if (! + (msg_tx_ring.virt_buffer[i] = + dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + &msg_tx_ring.phys_buffer[i], + GFP_KERNEL))) { + rc = -ENOMEM; + for (j = 0; j < msg_tx_ring.size; j++) + if (msg_tx_ring.virt_buffer[j]) + dma_free_coherent(NULL, + RIO_MSG_BUFFER_SIZE, + msg_tx_ring. + virt_buffer[j], + msg_tx_ring. + phys_buffer[j]); + goto out; + } + } + + /* Initialize outbound message descriptor ring */ + if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL, + msg_tx_ring.size * + RIO_MSG_DESC_SIZE, + &msg_tx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out_dma; + } + memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE); + msg_tx_ring.tx_slot = 0; + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys); + out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys); + + /* Configure for snooping */ + out_be32((void *)&msg_regs->osar, 0x00000004); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->osr, 0x000000b3); + + /* Hook up outbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, + "msg_tx", (void *)mport)) < 0) + goto out_irq; + + /* + * Configure outbound message unit + * Snooping + * Interrupts (all enabled, except QEIE) + * Chaining mode + * Disable + */ + out_be32((void *)&msg_regs->omr, 0x00100220); + + /* Set number of entries */ + out_be32((void *)&msg_regs->omr, + in_be32((void *)&msg_regs->omr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1); + + out: + return rc; + + out_irq: + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + out_dma: + for (i = 0; i < msg_tx_ring.size; i++) + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + + return rc; +} + +/** + * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to close + * + * Disables the outbound message unit, free all buffers, and + * frees the outbound message interrupt. + */ +void rio_close_outb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->omr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport); +} + +/** + * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles inbound message interrupts. Executes a registered inbound + * mailbox event handler and acks the interrupt occurence. + */ +static irqreturn_t +mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int isr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + isr = in_be32((void *)&msg_regs->isr); + + if (isr & RIO_MSG_ISR_TE) { + pr_info("RIO: inbound message reception error\n"); + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (isr & RIO_MSG_ISR_DIQI) { + /* + * We implement *only* mailbox 0, but can receive messages + * for any mailbox/letter to that mailbox destination. So, + * make the callback with an unknown/invalid mailbox number + * argument. + */ + port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1); + + /* Ack the queueing interrupt */ + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the inbound mailbox ring + * + * Initializes buffer ring, request the inbound message interrupt, + * and enables the inbound message unit. Returns %0 on success + * and %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, rc = 0; + + if ((entries < RIO_MIN_RX_RING_SIZE) || + (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize client buffer ring */ + msg_rx_ring.dev_id = dev_id; + msg_rx_ring.size = entries; + msg_rx_ring.rx_slot = 0; + for (i = 0; i < msg_rx_ring.size; i++) + msg_rx_ring.virt_buffer[i] = NULL; + + /* Initialize inbound message ring */ + if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL, + msg_rx_ring.size * + RIO_MAX_MSG_SIZE, + &msg_rx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys); + out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->isr, 0x00000091); + + /* Hook up inbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, + "msg_rx", (void *)mport)) < 0) { + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + goto out; + } + + /* + * Configure inbound message unit: + * Snooping + * 4KB max message size + * Unmask all interrupt sources + * Disable + */ + out_be32((void *)&msg_regs->imr, 0x001b0060); + + /* Set number of queue entries */ + out_be32((void *)&msg_regs->imr, + in_be32((void *)&msg_regs->imr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1); + + out: + return rc; +} + +/** + * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @mbox: Mailbox to close + * + * Disables the inbound message unit, free all buffers, and + * frees the inbound message interrupt. + */ +void rio_close_inb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->imr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE, + msg_rx_ring.virt, msg_rx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport); +} + +/** + * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * @buf: Buffer to add to inbound queue + * + * Adds the @buf buffer to the MPC85xx inbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) +{ + int rc = 0; + + pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", + msg_rx_ring.rx_slot); + + if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) { + printk(KERN_ERR + "RIO: error adding inbound buffer %d, buffer exists\n", + msg_rx_ring.rx_slot); + rc = -EINVAL; + goto out; + } + + msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf; + if (++msg_rx_ring.rx_slot == msg_rx_ring.size) + msg_rx_ring.rx_slot = 0; + + out: + return rc; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer); + +/** + * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * + * Gets the next available inbound message from the inbound message queue. + * A pointer to the message is returned on success or NULL on failure. + */ +void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) +{ + u32 imr; + u32 phys_buf, virt_buf; + void *buf = NULL; + int buf_idx; + + phys_buf = in_be32((void *)&msg_regs->ifqdpar); + + /* If no more messages, then bail out */ + if (phys_buf == in_be32((void *)&msg_regs->ifqepar)) + goto out2; + + virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys); + buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; + buf = msg_rx_ring.virt_buffer[buf_idx]; + + if (!buf) { + printk(KERN_ERR + "RIO: inbound message copy failed, no buffers\n"); + goto out1; + } + + /* Copy max message size, caller is expected to allocate that big */ + memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); + + /* Clear the available buffer */ + msg_rx_ring.virt_buffer[buf_idx] = NULL; + + out1: + imr = in_be32((void *)&msg_regs->imr); + out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI); + + out2: + return buf; +} + +EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); + +/** + * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles doorbell interrupts. Parses a list of registered + * doorbell event handlers and executes a matching event handler. + */ +static irqreturn_t +mpc85xx_rio_dbell_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int dsr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + dsr = in_be32((void *)&msg_regs->dsr); + + if (dsr & DOORBELL_DSR_TE) { + pr_info("RIO: doorbell reception error\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE); + goto out; + } + + if (dsr & DOORBELL_DSR_QFI) { + pr_info("RIO: doorbell queue full\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (dsr & DOORBELL_DSR_DIQI) { + u32 dmsg = + (u32) dbell_ring.virt + + (in_be32((void *)&msg_regs->dqdpar) & 0xfff); + u32 dmr; + struct rio_dbell *dbell; + int found = 0; + + pr_debug + ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + + list_for_each_entry(dbell, &port->dbells, node) { + if ((dbell->res->start <= DBELL_INF(dmsg)) && + (dbell->res->end >= DBELL_INF(dmsg))) { + found = 1; + break; + } + } + if (found) { + dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg), + DBELL_INF(dmsg)); + } else { + pr_debug + ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + } + dmr = in_be32((void *)&msg_regs->dmr); + out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init + * @mport: Master port implementing the inbound doorbell unit + * + * Initializes doorbell unit hardware and inbound DMA buffer + * ring. Called from mpc85xx_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ +static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) +{ + int rc = 0; + + /* Map outbound doorbell window immediately after maintenance window */ + if (!(dbell_win = + (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, + RIO_DBELL_WIN_SIZE))) { + printk(KERN_ERR + "RIO: unable to map outbound doorbell window\n"); + rc = -ENOMEM; + goto out; + } + + /* Initialize inbound doorbells */ + if (!(dbell_ring.virt = dma_alloc_coherent(NULL, + 512 * DOORBELL_MESSAGE_SIZE, + &dbell_ring.phys, + GFP_KERNEL))) { + printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); + rc = -ENOMEM; + iounmap((void *)dbell_win); + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys); + out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->dsr, 0x00000091); + + /* Hook up doorbell handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0, + "dbell_rx", (void *)mport) < 0)) { + iounmap((void *)dbell_win); + dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dbell_ring.virt, dbell_ring.phys); + printk(KERN_ERR + "MPC85xx RIO: unable to request inbound doorbell irq"); + goto out; + } + + /* Configure doorbells for snooping, 512 entries, and enable */ + out_be32((void *)&msg_regs->dmr, 0x00108161); + + out: + return rc; +} + +static char *cmdline = NULL; + +static int mpc85xx_rio_get_hdid(int index) +{ + /* XXX Need to parse multiple entries in some format */ + if (!cmdline) + return -1; + + return simple_strtol(cmdline, NULL, 0); +} + +static int mpc85xx_rio_get_cmdline(char *s) +{ + if (!s) + return 0; + + cmdline = s; + return 1; +} + +__setup("riohdid=", mpc85xx_rio_get_cmdline); + +/** + * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface + * @law_start: Starting physical address of RapidIO LAW + * @law_size: Size of RapidIO LAW + * + * Initializes MPC85xx RapidIO hardware interface, configures + * master port with system-specific info, and registers the + * master port with the RapidIO subsystem. + */ +void mpc85xx_rio_setup(int law_start, int law_size) +{ + struct rio_ops *ops; + struct rio_mport *port; + + ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + ops->lcread = mpc85xx_local_config_read; + ops->lcwrite = mpc85xx_local_config_write; + ops->cread = mpc85xx_rio_config_read; + ops->cwrite = mpc85xx_rio_config_write; + ops->dsend = mpc85xx_rio_doorbell_send; + + port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL); + port->id = 0; + port->index = 0; + INIT_LIST_HEAD(&port->dbells); + port->iores.start = law_start; + port->iores.end = law_start + law_size; + port->iores.flags = IORESOURCE_MEM; + + rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); + rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + strcpy(port->name, "RIO0 mport"); + + port->ops = ops; + port->host_deviceid = mpc85xx_rio_get_hdid(port->id); + + rio_register_mport(port); + + regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000); + atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET); + maint_atmu_regs = atmu_regs + 1; + dbell_atmu_regs = atmu_regs + 2; + msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET); + + /* Configure maintenance transaction window */ + out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000); + out_be32((void *)&maint_atmu_regs->rowar, 0x80077015); + + maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE); + + /* Configure outbound doorbell window */ + out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400); + out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b); + mpc85xx_rio_doorbell_init(port); +} diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/ppc/syslib/ppc85xx_rio.h new file mode 100644 index 000000000000..c0827a2c3eec --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_rio.h @@ -0,0 +1,21 @@ +/* + * MPC85xx RapidIO definitions + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC85XX_RIO_H +#define __PPC_SYSLIB_PPC85XX_RIO_H + +#include <linux/config.h> +#include <linux/init.h> + +extern void mpc85xx_rio_setup(int law_start, int law_size); + +#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index de2f90576577..1a47ff4b831d 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -3,7 +3,7 @@ * * MPC85XX common board code * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h index 6e6cfe162faf..e340b0545fb5 100644 --- a/arch/ppc/syslib/ppc85xx_setup.h +++ b/arch/ppc/syslib/ppc85xx_setup.h @@ -3,7 +3,7 @@ * * MPC85XX common board definitions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2004 Freescale Semiconductor Inc. * diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 62ee86e80711..c0b93c4191ee 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -3,7 +3,7 @@ * * PPC System library functions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * Copyright 2005 Freescale Semiconductor Inc. * Copyright 2005 MontaVista, Inc. by Vitaly Bordug <vbordug@ru.mvista.com> @@ -14,6 +14,7 @@ * option) any later version. */ +#include <linux/string.h> #include <asm/ppc_sys.h> int (*ppc_sys_device_fixup) (struct platform_device * pdev); diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c index e960fe935325..6ff3aab82fc3 100644 --- a/arch/ppc/syslib/pq2_devices.c +++ b/arch/ppc/syslib/pq2_devices.c @@ -3,7 +3,7 @@ * * PQ2 Device descriptions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index 7b6c9ebdb9e3..36d6e2179940 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -3,7 +3,7 @@ * * PQ2 System descriptions * - * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c index 278da6ee62ea..af4deace49e0 100644 --- a/arch/ppc/syslib/prom.c +++ b/arch/ppc/syslib/prom.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/ioport.h> @@ -1165,7 +1164,7 @@ get_property(struct device_node *np, const char *name, int *lenp) /* * Add a property to a node */ -void +int prom_add_property(struct device_node* np, struct property* prop) { struct property **next = &np->properties; @@ -1174,6 +1173,8 @@ prom_add_property(struct device_node* np, struct property* prop) while (*next) next = &(*next)->next; *next = prop; + + return 0; } /* I quickly hacked that one, check against spec ! */ @@ -1335,10 +1336,8 @@ release_OF_resource(struct device_node* node, int index) if (!res) return -ENODEV; - if (res->name) { - kfree(res->name); - res->name = NULL; - } + kfree(res->name); + res->name = NULL; release_resource(res); kfree(res); diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c index 7f15136830f4..df14422ae1c6 100644 --- a/arch/ppc/syslib/prom_init.c +++ b/arch/ppc/syslib/prom_init.c @@ -9,7 +9,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/ioport.h> diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index 98612d420346..c80177f8ec04 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -184,7 +184,9 @@ xmon_map_scc(void) sccc = base + (addr & ~PAGE_MASK); sccd = sccc + 0x10; - } else { + } +#ifdef CONFIG_PPC_CHRP + else { base = (volatile unsigned char *) isa_io_base; if (_machine == _MACH_chrp) base = (volatile unsigned char *) @@ -200,6 +202,7 @@ xmon_map_scc(void) RXRDY = 1; DLAB = 0x80; } +#endif /* CONFIG_PPC_CHRP */ #elif defined(CONFIG_GEMINI) /* should already be mapped by the kernel boot */ sccc = (volatile unsigned char *) 0xffeffb0d; diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index 66bfaa3211a2..2b483b4f1602 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -220,8 +220,7 @@ static void get_tb(unsigned *p) p[1] = lo; } -void -xmon(struct pt_regs *excp) +int xmon(struct pt_regs *excp) { struct pt_regs regs; int msr, cmd; @@ -290,6 +289,8 @@ xmon(struct pt_regs *excp) #endif /* CONFIG_SMP */ set_msr(msr); /* restore interrupt enable */ get_tb(start_tb[smp_processor_id()]); + + return cmd != 'X'; } irqreturn_t diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig deleted file mode 100644 index 2130cc315957..000000000000 --- a/arch/ppc64/Kconfig +++ /dev/null @@ -1,510 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -config 64BIT - def_bool y - -config MMU - bool - default y - -config PPC_STD_MMU - def_bool y - -config UID16 - bool - -config RWSEM_GENERIC_SPINLOCK - bool - -config RWSEM_XCHGADD_ALGORITHM - bool - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config GENERIC_ISA_DMA - bool - default y - -config EARLY_PRINTK - bool - default y - -config COMPAT - bool - default y - -config SCHED_NO_NO_OMIT_FRAME_POINTER - bool - default y - -config ARCH_MAY_HAVE_PC_FDC - bool - default y - -config PPC_STD_MMU - bool - default y - -# We optimistically allocate largepages from the VM, so make the limit -# large enough (16MB). This badly named config option is actually -# max order + 1 -config FORCE_MAX_ZONEORDER - int - default "13" - -source "init/Kconfig" - -config SYSVIPC_COMPAT - bool - depends on COMPAT && SYSVIPC - default y - -menu "Platform support" - -choice - prompt "Platform Type" - default PPC_MULTIPLATFORM - -config PPC_ISERIES - bool "IBM Legacy iSeries" - -config PPC_MULTIPLATFORM - bool "Generic" - -endchoice - -config PPC_PSERIES - depends on PPC_MULTIPLATFORM - bool " IBM pSeries & new iSeries" - default y - -config PPC_BPA - bool " Broadband Processor Architecture" - depends on PPC_MULTIPLATFORM - -config PPC_PMAC - depends on PPC_MULTIPLATFORM - bool " Apple G5 based machines" - default y - select U3_DART - select GENERIC_TBSYNC - -config PPC_MAPLE - depends on PPC_MULTIPLATFORM - bool " Maple 970FX Evaluation Board" - select U3_DART - select MPIC_BROKEN_U3 - select GENERIC_TBSYNC - default n - help - This option enables support for the Maple 970FX Evaluation Board. - For more informations, refer to <http://www.970eval.com> - -config PPC - bool - default y - -config PPC64 - bool - default y - -config PPC_OF - depends on PPC_MULTIPLATFORM - bool - default y - -config XICS - depends on PPC_PSERIES - bool - default y - -config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE - bool - default y - -config PPC_I8259 - depends on PPC_PSERIES - bool - default y - -config BPA_IIC - depends on PPC_BPA - bool - default y - -# VMX is pSeries only for now until somebody writes the iSeries -# exception vectors for it -config ALTIVEC - bool "Support for VMX (Altivec) vector unit" - depends on PPC_MULTIPLATFORM - default y - -config PPC_SPLPAR - depends on PPC_PSERIES - bool "Support for shared-processor logical partitions" - default n - help - Enabling this option will make the kernel run more efficiently - on logically-partitioned pSeries systems which use shared - processors, that is, which share physical processors between - two or more partitions. - -config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on PPC_MULTIPLATFORM && EXPERIMENTAL - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similiarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. - -config IBMVIO - depends on PPC_PSERIES || PPC_ISERIES - bool - default y - -config U3_DART - bool - depends on PPC_MULTIPLATFORM - default n - -config MPIC_BROKEN_U3 - bool - depends on PPC_MAPLE - default y - -config GENERIC_TBSYNC - def_bool n - -config PPC_PMAC64 - bool - depends on PPC_PMAC - default y - -config BOOTX_TEXT - bool "Support for early boot text console" - depends PPC_OF - help - Say Y here to see progress messages from the boot firmware in text - mode. Requires an Open Firmware compatible video card. - -config POWER4 - def_bool y - -config PPC_FPU - def_bool y - -config POWER4_ONLY - bool "Optimize for POWER4" - default n - ---help--- - Cause the compiler to optimize for POWER4 processors. The resulting - binary will not work on POWER3 or RS64 processors when compiled with - binutils 2.15 or later. - -config IOMMU_VMERGE - bool "Enable IOMMU virtual merging (EXPERIMENTAL)" - depends on EXPERIMENTAL - default n - help - Cause IO segments sent to a device for DMA to be merged virtually - by the IOMMU when they happen to have been allocated contiguously. - This doesn't add pressure to the IOMMU allocator. However, some - drivers don't support getting large merged segments coming back - from *_map_sg(). Say Y if you know the drivers you are using are - properly handling this case. - -config SMP - bool "Symmetric multi-processing support" - ---help--- - This enables support for systems with more than one CPU. If you have - a system with only one CPU, say N. If you have a system with more - than one CPU, say Y. - - If you say N here, the kernel will run on single and multiprocessor - machines, but will use only one CPU of a multiprocessor machine. If - you say Y here, the kernel will run on single-processor machines. - On a single-processor machine, the kernel will run faster if you say - N here. - - If you don't know what to do here, say Y. - -config NR_CPUS - int "Maximum number of CPUs (2-128)" - range 2 128 - depends on SMP - default "32" - -config HMT - bool "Hardware multithreading" - depends on SMP && PPC_PSERIES && BROKEN - help - This option enables hardware multithreading on RS64 cpus. - pSeries systems p620 and p660 have such a cpu type. - -config NUMA - bool "NUMA support" - default y if SMP && PPC_PSERIES - -config ARCH_SELECT_MEMORY_MODEL - def_bool y - -config ARCH_FLATMEM_ENABLE - def_bool y - depends on !NUMA - -config ARCH_DISCONTIGMEM_ENABLE - def_bool y - depends on SMP && PPC_PSERIES - -config ARCH_DISCONTIGMEM_DEFAULT - def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE - -config ARCH_SPARSEMEM_ENABLE - def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE - -source "mm/Kconfig" - -config HAVE_ARCH_EARLY_PFN_TO_NID - def_bool y - depends on NEED_MULTIPLE_NODES - -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - -config PPC_64K_PAGES - bool "64k page size" - help - This option changes the kernel logical page size to 64k. On machines - without processor support for 64k pages, the kernel will simulate - them by loading each individual 4k page on demand transparently, - while on hardware with such support, it will be used to map - normal application pages. - -config SCHED_SMT - bool "SMT (Hyperthreading) scheduler support" - depends on SMP - default off - help - SMT scheduler support improves the CPU scheduler's decision making - when dealing with POWER5 cpus at a cost of slightly increased - overhead in some places. If unsure say N here. - -source "kernel/Kconfig.preempt" -source kernel/Kconfig.hz - -config EEH - bool "PCI Extended Error Handling (EEH)" if EMBEDDED - depends on PPC_PSERIES - default y if !EMBEDDED - -# -# Use the generic interrupt handling code in kernel/irq/: -# -config GENERIC_HARDIRQS - bool - default y - -config PPC_RTAS - bool - depends on PPC_PSERIES || PPC_BPA - default y - -config RTAS_ERROR_LOGGING - bool - depends on PPC_RTAS - default y - -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on RTAS_PROC - -config SCANLOG - tristate "Scanlog dump interface" - depends on RTAS_PROC && PPC_PSERIES - -config LPARCFG - tristate "LPAR Configuration Data" - depends on PPC_PSERIES || PPC_ISERIES - help - Provide system capacity information via human readable - <key word>=<value> pairs through a /proc/ppc64/lparcfg interface. - -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - -source "fs/Kconfig.binfmt" - -config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs" - depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) - select HOTPLUG - ---help--- - Say Y here to be able to turn CPUs off and on. - - Say N if you are unsure. - -config PROC_DEVICETREE - bool "Support for Open Firmware device tree in /proc" - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware. If unsure, say Y here. - -config CMDLINE_BOOL - bool "Default bootloader kernel arguments" - depends on !PPC_ISERIES - -config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL - default "console=ttyS0,9600 console=tty0 root=/dev/sda2" - help - On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - most cases you will need to specify the root device here. - -endmenu - -config ISA_DMA_API - bool - default y - -menu "Bus Options" - -config ISA - bool - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. If you have an Apple machine, say N here; if you - have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If - you have an embedded board, consult your board documentation. - -config SBUS - bool - -config MCA - bool - -config EISA - bool - -config PCI - bool "support for PCI devices" if (EMBEDDED && PPC_ISERIES) - default y - help - Find out whether your system includes a PCI bus. PCI is the name of - a bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you say Y here, the kernel will include drivers and - infrastructure code to support PCI bus devices. - -config PCI_DOMAINS - bool - default PCI - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -source "drivers/pci/hotplug/Kconfig" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -menu "iSeries device drivers" - depends on PPC_ISERIES - -config VIOCONS - tristate "iSeries Virtual Console Support" - -config VIODASD - tristate "iSeries Virtual I/O disk support" - help - If you are running on an iSeries system and you want to use - virtual disks created and managed by OS/400, say Y. - -config VIOCD - tristate "iSeries Virtual I/O CD support" - help - If you are running Linux on an IBM iSeries system and you want to - read a CD drive owned by OS/400, say Y here. - -config VIOTAPE - tristate "iSeries Virtual Tape Support" - help - If you are running Linux on an iSeries system and you want Linux - to read and/or write a tape drive owned by OS/400, say Y here. - -endmenu - -config VIOPATH - bool - depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH - default y - -source "arch/powerpc/oprofile/Kconfig" - -source "arch/ppc64/Kconfig.debug" - -source "security/Kconfig" - -config KEYS_COMPAT - bool - depends on COMPAT && KEYS - default y - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug index f16a5030527b..b258c9314a1b 100644 --- a/arch/ppc64/Kconfig.debug +++ b/arch/ppc64/Kconfig.debug @@ -55,10 +55,6 @@ config XMON_DEFAULT xmon is normally disabled unless booted with 'xmon=on'. Use 'xmon=off' to disable xmon init during runtime. -config PPCDBG - bool "Include PPCDBG realtime debugging" - depends on DEBUG_KERNEL - config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" help diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index c441aebe7648..e876c213f5ce 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -2,61 +2,6 @@ # Makefile for the linux ppc64 kernel. # -ifneq ($(CONFIG_PPC_MERGE),y) - -EXTRA_CFLAGS += -mno-minimal-toc -extra-y := head.o vmlinux.lds - -obj-y := misc.o prom.o - -endif - -obj-y += irq.o idle.o dma.o \ - align.o pacaData.o \ - udbg.o ioctl32.o \ - rtc.o \ - cpu_setup_power4.o \ - iommu.o sysfs.o vdso.o firmware.o -obj-y += vdso32/ vdso64/ - -pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o - -obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y) +obj-y += idle.o align.o obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o -endif - -obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o - -obj-$(CONFIG_KEXEC) += machine_kexec.o -obj-$(CONFIG_EEH) += eeh.o -obj-$(CONFIG_PROC_FS) += proc_ppc64.o -obj-$(CONFIG_MODULES) += module.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_MODULES) += ppc_ksyms.o -endif -obj-$(CONFIG_PPC_RTAS) += rtas_pci.o -obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_LPARCFG) += lparcfg.o -obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_BOOTX_TEXT) += btext.o -endif -obj-$(CONFIG_HVCS) += hvcserver.o - -obj-$(CONFIG_PPC_PMAC) += udbg_scc.o - -obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o - -obj-$(CONFIG_KPROBES) += kprobes.o - -CFLAGS_ioctl32.o += -Ifs/ - -ifneq ($(CONFIG_PPC_MERGE),y) -ifeq ($(CONFIG_PPC_ISERIES),y) -arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s -AFLAGS_head.o += -Iarch/powerpc/kernel -endif -endif diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c deleted file mode 100644 index bce9065da6cb..000000000000 --- a/arch/ppc64/kernel/asm-offsets.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/time.h> -#include <linux/hardirq.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/processor.h> - -#include <asm/paca.h> -#include <asm/lppaca.h> -#include <asm/iseries/hv_lp_event.h> -#include <asm/rtas.h> -#include <asm/cputable.h> -#include <asm/cache.h> -#include <asm/systemcfg.h> -#include <asm/compat.h> - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -int main(void) -{ - /* thread struct on stack */ - DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); - DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); - DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror)); - - /* task_struct->thread */ - DEFINE(THREAD, offsetof(struct task_struct, thread)); - DEFINE(PT_REGS, offsetof(struct thread_struct, regs)); - DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode)); - DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0])); - DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr)); - DEFINE(KSP, offsetof(struct thread_struct, ksp)); - DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid)); - -#ifdef CONFIG_ALTIVEC - DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0])); - DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave)); - DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr)); - DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr)); -#endif /* CONFIG_ALTIVEC */ - DEFINE(MM, offsetof(struct task_struct, mm)); - DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context)); - - DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size)); - DEFINE(DCACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_dline_size)); - DEFINE(DCACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, dlines_per_page)); - DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); - DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); - DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); - DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); - - /* paca */ - DEFINE(PACA_SIZE, sizeof(struct paca_struct)); - DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index)); - DEFINE(PACAPROCSTART, offsetof(struct paca_struct, cpu_start)); - DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack)); - DEFINE(PACACURRENT, offsetof(struct paca_struct, __current)); - DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr)); - DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); - DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); - DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr)); - DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1)); - DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc)); - DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, proc_enabled)); - DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); - DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); - DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); -#ifdef CONFIG_PPC_64K_PAGES - DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir)); -#endif -#ifdef CONFIG_HUGETLB_PAGE - DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas)); - DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas)); -#endif /* CONFIG_HUGETLB_PAGE */ - DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr)); - DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); - DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc)); - DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb)); - DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi)); - DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); - DEFINE(PACALPPACA, offsetof(struct paca_struct, lppaca)); - DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); - DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0)); - DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1)); - DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int)); - DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int)); - - /* RTAS */ - DEFINE(RTASBASE, offsetof(struct rtas_t, base)); - DEFINE(RTASENTRY, offsetof(struct rtas_t, entry)); - - /* Interrupt register frame */ - DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD); - - DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); - - /* 288 = # of volatile regs, int & fp, for leaf routines */ - /* which do not stack a frame. See the PPC64 ABI. */ - DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 288); - /* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */ - DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16); - DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16); - DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0])); - DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1])); - DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2])); - DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3])); - DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4])); - DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5])); - DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6])); - DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7])); - DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8])); - DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9])); - DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10])); - DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11])); - DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12])); - DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13])); - /* - * Note: these symbols include _ because they overlap with special - * register names - */ - DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip)); - DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr)); - DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr)); - DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link)); - DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr)); - DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer)); - DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar)); - DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr)); - DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3)); - DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result)); - DEFINE(_TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap)); - DEFINE(SOFTE, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, softe)); - - /* These _only_ to be used with {PROM,RTAS}_FRAME_SIZE!!! */ - DEFINE(_SRR0, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)); - DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8); - - DEFINE(CLONE_VM, CLONE_VM); - DEFINE(CLONE_UNTRACED, CLONE_UNTRACED); - - /* About the CPU features table */ - DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec)); - DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask)); - DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value)); - DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features)); - DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup)); - - /* systemcfg offsets for use by vdso */ - DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct systemcfg, tb_orig_stamp)); - DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct systemcfg, tb_ticks_per_sec)); - DEFINE(CFG_TB_TO_XS, offsetof(struct systemcfg, tb_to_xs)); - DEFINE(CFG_STAMP_XSEC, offsetof(struct systemcfg, stamp_xsec)); - DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct systemcfg, tb_update_count)); - DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct systemcfg, tz_minuteswest)); - DEFINE(CFG_TZ_DSTTIME, offsetof(struct systemcfg, tz_dsttime)); - DEFINE(CFG_SYSCALL_MAP32, offsetof(struct systemcfg, syscall_map_32)); - DEFINE(CFG_SYSCALL_MAP64, offsetof(struct systemcfg, syscall_map_64)); - - /* timeval/timezone offsets for use by vdso */ - DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec)); - DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec)); - DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec)); - DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec)); - DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); - DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime)); - - return 0; -} diff --git a/arch/ppc64/kernel/btext.c b/arch/ppc64/kernel/btext.c deleted file mode 100644 index 506a37885c5c..000000000000 --- a/arch/ppc64/kernel/btext.c +++ /dev/null @@ -1,792 +0,0 @@ -/* - * Procedures for drawing on the screen early on in the boot process. - * - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - */ -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/btext.h> -#include <asm/prom.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/io.h> -#include <asm/lmb.h> -#include <asm/processor.h> -#include <asm/udbg.h> - -#undef NO_SCROLL - -#ifndef NO_SCROLL -static void scrollscreen(void); -#endif - -static void draw_byte(unsigned char c, long locX, long locY); -static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb); -static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb); -static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb); - -static int g_loc_X; -static int g_loc_Y; -static int g_max_loc_X; -static int g_max_loc_Y; - -static int dispDeviceRowBytes; -static int dispDeviceDepth; -static int dispDeviceRect[4]; -static unsigned char *dispDeviceBase, *logicalDisplayBase; - -unsigned long disp_BAT[2] __initdata = {0, 0}; - -#define cmapsz (16*256) - -static unsigned char vga_font[cmapsz]; - -int boot_text_mapped; -int force_printk_to_btext = 0; - - -/* Here's a small text engine to use during early boot - * or for debugging purposes - * - * todo: - * - * - build some kind of vgacon with it to enable early printk - * - move to a separate file - * - add a few video driver hooks to keep in sync with display - * changes. - */ - -void map_boot_text(void) -{ - unsigned long base, offset, size; - unsigned char *vbase; - - /* By default, we are no longer mapped */ - boot_text_mapped = 0; - if (dispDeviceBase == 0) - return; - base = ((unsigned long) dispDeviceBase) & 0xFFFFF000UL; - offset = ((unsigned long) dispDeviceBase) - base; - size = dispDeviceRowBytes * dispDeviceRect[3] + offset - + dispDeviceRect[0]; - vbase = __ioremap(base, size, _PAGE_NO_CACHE); - if (vbase == 0) - return; - logicalDisplayBase = vbase + offset; - boot_text_mapped = 1; -} - -int btext_initialize(struct device_node *np) -{ - unsigned int width, height, depth, pitch; - unsigned long address = 0; - u32 *prop; - - prop = (u32 *)get_property(np, "width", NULL); - if (prop == NULL) - return -EINVAL; - width = *prop; - prop = (u32 *)get_property(np, "height", NULL); - if (prop == NULL) - return -EINVAL; - height = *prop; - prop = (u32 *)get_property(np, "depth", NULL); - if (prop == NULL) - return -EINVAL; - depth = *prop; - pitch = width * ((depth + 7) / 8); - prop = (u32 *)get_property(np, "linebytes", NULL); - if (prop) - pitch = *prop; - if (pitch == 1) - pitch = 0x1000; - prop = (u32 *)get_property(np, "address", NULL); - if (prop) - address = *prop; - - /* FIXME: Add support for PCI reg properties */ - - if (address == 0) - return -EINVAL; - - g_loc_X = 0; - g_loc_Y = 0; - g_max_loc_X = width / 8; - g_max_loc_Y = height / 16; - logicalDisplayBase = (unsigned char *)address; - dispDeviceBase = (unsigned char *)address; - dispDeviceRowBytes = pitch; - dispDeviceDepth = depth; - dispDeviceRect[0] = dispDeviceRect[1] = 0; - dispDeviceRect[2] = width; - dispDeviceRect[3] = height; - - map_boot_text(); - - return 0; -} - -static void btext_putc(unsigned char c) -{ - btext_drawchar(c); -} - -void __init init_boot_display(void) -{ - char *name; - struct device_node *np = NULL; - int rc = -ENODEV; - - printk("trying to initialize btext ...\n"); - - name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); - if (name != NULL) { - np = of_find_node_by_path(name); - if (np != NULL) { - if (strcmp(np->type, "display") != 0) { - printk("boot stdout isn't a display !\n"); - of_node_put(np); - np = NULL; - } - } - } - if (np) - rc = btext_initialize(np); - if (rc) { - for (np = NULL; (np = of_find_node_by_type(np, "display"));) { - if (get_property(np, "linux,opened", NULL)) { - printk("trying %s ...\n", np->full_name); - rc = btext_initialize(np); - printk("result: %d\n", rc); - } - if (rc == 0) - break; - } - } - if (rc == 0 && udbg_putc == NULL) - udbg_putc = btext_putc; -} - - -/* Calc the base address of a given point (x,y) */ -static unsigned char * calc_base(int x, int y) -{ - unsigned char *base; - - base = logicalDisplayBase; - if (base == 0) - base = dispDeviceBase; - base += (x + dispDeviceRect[0]) * (dispDeviceDepth >> 3); - base += (y + dispDeviceRect[1]) * dispDeviceRowBytes; - return base; -} - -/* Adjust the display to a new resolution */ -void btext_update_display(unsigned long phys, int width, int height, - int depth, int pitch) -{ - if (dispDeviceBase == 0) - return; - - /* check it's the same frame buffer (within 256MB) */ - if ((phys ^ (unsigned long)dispDeviceBase) & 0xf0000000) - return; - - dispDeviceBase = (__u8 *) phys; - dispDeviceRect[0] = 0; - dispDeviceRect[1] = 0; - dispDeviceRect[2] = width; - dispDeviceRect[3] = height; - dispDeviceDepth = depth; - dispDeviceRowBytes = pitch; - if (boot_text_mapped) { - iounmap(logicalDisplayBase); - boot_text_mapped = 0; - } - map_boot_text(); - g_loc_X = 0; - g_loc_Y = 0; - g_max_loc_X = width / 8; - g_max_loc_Y = height / 16; -} - -void btext_clearscreen(void) -{ - unsigned long *base = (unsigned long *)calc_base(0, 0); - unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; - int i,j; - - for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++) - { - unsigned long *ptr = base; - for(j=width; j; --j) - *(ptr++) = 0; - base += (dispDeviceRowBytes >> 3); - } -} - -#ifndef NO_SCROLL -static void scrollscreen(void) -{ - unsigned long *src = (unsigned long *)calc_base(0,16); - unsigned long *dst = (unsigned long *)calc_base(0,0); - unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; - int i,j; - - for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++) - { - unsigned long *src_ptr = src; - unsigned long *dst_ptr = dst; - for(j=width; j; --j) - *(dst_ptr++) = *(src_ptr++); - src += (dispDeviceRowBytes >> 3); - dst += (dispDeviceRowBytes >> 3); - } - for (i=0; i<16; i++) - { - unsigned long *dst_ptr = dst; - for(j=width; j; --j) - *(dst_ptr++) = 0; - dst += (dispDeviceRowBytes >> 3); - } -} -#endif /* ndef NO_SCROLL */ - -void btext_drawchar(char c) -{ - int cline = 0; -#ifdef NO_SCROLL - int x; -#endif - if (!boot_text_mapped) - return; - - switch (c) { - case '\b': - if (g_loc_X > 0) - --g_loc_X; - break; - case '\t': - g_loc_X = (g_loc_X & -8) + 8; - break; - case '\r': - g_loc_X = 0; - break; - case '\n': - g_loc_X = 0; - g_loc_Y++; - cline = 1; - break; - default: - draw_byte(c, g_loc_X++, g_loc_Y); - } - if (g_loc_X >= g_max_loc_X) { - g_loc_X = 0; - g_loc_Y++; - cline = 1; - } -#ifndef NO_SCROLL - while (g_loc_Y >= g_max_loc_Y) { - scrollscreen(); - g_loc_Y--; - } -#else - /* wrap around from bottom to top of screen so we don't - waste time scrolling each line. -- paulus. */ - if (g_loc_Y >= g_max_loc_Y) - g_loc_Y = 0; - if (cline) { - for (x = 0; x < g_max_loc_X; ++x) - draw_byte(' ', x, g_loc_Y); - } -#endif -} - -void btext_drawstring(const char *c) -{ - if (!boot_text_mapped) - return; - while (*c) - btext_drawchar(*c++); -} - -void btext_drawhex(unsigned long v) -{ - char *hex_table = "0123456789abcdef"; - - if (!boot_text_mapped) - return; - btext_drawchar(hex_table[(v >> 60) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 56) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 52) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 48) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 44) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 40) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 36) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 32) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 8) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 4) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 0) & 0x0000000FUL]); - btext_drawchar(' '); -} - -static void draw_byte(unsigned char c, long locX, long locY) -{ - unsigned char *base = calc_base(locX << 3, locY << 4); - unsigned char *font = &vga_font[((unsigned int)c) * 16]; - int rb = dispDeviceRowBytes; - - switch(dispDeviceDepth) { - case 24: - case 32: - draw_byte_32(font, (unsigned int *)base, rb); - break; - case 15: - case 16: - draw_byte_16(font, (unsigned int *)base, rb); - break; - case 8: - draw_byte_8(font, (unsigned int *)base, rb); - break; - } -} - -static unsigned int expand_bits_8[16] = { - 0x00000000, - 0x000000ff, - 0x0000ff00, - 0x0000ffff, - 0x00ff0000, - 0x00ff00ff, - 0x00ffff00, - 0x00ffffff, - 0xff000000, - 0xff0000ff, - 0xff00ff00, - 0xff00ffff, - 0xffff0000, - 0xffff00ff, - 0xffffff00, - 0xffffffff -}; - -static unsigned int expand_bits_16[4] = { - 0x00000000, - 0x0000ffff, - 0xffff0000, - 0xffffffff -}; - - -static void draw_byte_32(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0xFFFFFFFFUL; - int bg = 0x00000000UL; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (-(bits >> 7) & fg) ^ bg; - base[1] = (-((bits >> 6) & 1) & fg) ^ bg; - base[2] = (-((bits >> 5) & 1) & fg) ^ bg; - base[3] = (-((bits >> 4) & 1) & fg) ^ bg; - base[4] = (-((bits >> 3) & 1) & fg) ^ bg; - base[5] = (-((bits >> 2) & 1) & fg) ^ bg; - base[6] = (-((bits >> 1) & 1) & fg) ^ bg; - base[7] = (-(bits & 1) & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static void draw_byte_16(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0xFFFFFFFFUL; - int bg = 0x00000000UL; - unsigned int *eb = (int *)expand_bits_16; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (eb[bits >> 6] & fg) ^ bg; - base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg; - base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg; - base[3] = (eb[bits & 3] & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static void draw_byte_8(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0x0F0F0F0FUL; - int bg = 0x00000000UL; - unsigned int *eb = (int *)expand_bits_8; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (eb[bits >> 4] & fg) ^ bg; - base[1] = (eb[bits & 0xf] & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static unsigned char vga_font[cmapsz] = { -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd, -0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff, -0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe, -0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, -0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, -0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00, -0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd, -0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e, -0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30, -0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63, -0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8, -0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e, -0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, -0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb, -0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6, -0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, -0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, -0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c, -0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c, -0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, -0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c, -0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18, -0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, -0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30, -0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18, -0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, -0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe, -0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0, -0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18, -0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, -0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, -0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, -0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde, -0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, -0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0, -0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c, -0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, -0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, -0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c, -0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60, -0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7, -0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, -0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c, -0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c, -0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, -0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18, -0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, -0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30, -0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, -0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, -0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06, -0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb, -0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66, -0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60, -0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30, -0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3, -0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18, -0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, -0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, -0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00, -0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe, -0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, -0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, -0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06, -0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe, -0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, -0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18, -0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66, -0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, -0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00, -0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b, -0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c, -0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00, -0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, -0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, -0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00, -0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, -0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18, -0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, -0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00, -0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, -0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, -0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, -0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, -0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c, -0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0, -0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06, -0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, -0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, -0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36, -0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44, -0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, -0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, -0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, -0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, -0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0, -0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, -0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, -0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0, -0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8, -0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66, -0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, -0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66, -0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60, -0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, -0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18, -0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, -0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00, -0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c, -0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c, -0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00, -0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, -}; diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S deleted file mode 100644 index 9e8050ea1225..000000000000 --- a/arch/ppc64/kernel/head.S +++ /dev/null @@ -1,2085 +0,0 @@ -/* - * arch/ppc64/kernel/head.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com - * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/systemcfg.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/bug.h> -#include <asm/cputable.h> -#include <asm/setup.h> -#include <asm/hvcall.h> -#include <asm/iseries/lpar_map.h> -#include <asm/thread_info.h> - -#ifdef CONFIG_PPC_ISERIES -#define DO_SOFT_DISABLE -#endif - -/* - * We layout physical memory as follows: - * 0x0000 - 0x00ff : Secondary processor spin code - * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs - * 0x6000 - 0x6fff : Initial (CPU0) segment table - * 0x7000 - 0x7fff : FWNMI data area - * 0x8000 - : Early init and support code - */ - -/* - * SPRG Usage - * - * Register Definition - * - * SPRG0 reserved for hypervisor - * SPRG1 temp - used to save gpr - * SPRG2 temp - used to save gpr - * SPRG3 virt addr of paca - */ - -/* - * Entering into this code we make the following assumptions: - * For pSeries: - * 1. The MMU is off & open firmware is running in real mode. - * 2. The kernel is entered at __start - * - * For iSeries: - * 1. The MMU is on (as it always is for iSeries) - * 2. The kernel is entered at system_reset_iSeries - */ - - .text - .globl _stext -_stext: -#ifdef CONFIG_PPC_MULTIPLATFORM -_GLOBAL(__start) - /* NOP this out unconditionally */ -BEGIN_FTR_SECTION - b .__start_initialization_multiplatform -END_FTR_SECTION(0, 1) -#endif /* CONFIG_PPC_MULTIPLATFORM */ - - /* Catch branch to 0 in real mode */ - trap - -#ifdef CONFIG_PPC_ISERIES - /* - * At offset 0x20, there is a pointer to iSeries LPAR data. - * This is required by the hypervisor - */ - . = 0x20 - .llong hvReleaseData-KERNELBASE - - /* - * At offset 0x28 and 0x30 are offsets to the mschunks_map - * array (used by the iSeries LPAR debugger to do translation - * between physical addresses and absolute addresses) and - * to the pidhash table (also used by the debugger) - */ - .llong mschunks_map-KERNELBASE - .llong 0 /* pidhash-KERNELBASE SFRXXX */ - - /* Offset 0x38 - Pointer to start of embedded System.map */ - .globl embedded_sysmap_start -embedded_sysmap_start: - .llong 0 - /* Offset 0x40 - Pointer to end of embedded System.map */ - .globl embedded_sysmap_end -embedded_sysmap_end: - .llong 0 - -#endif /* CONFIG_PPC_ISERIES */ - - /* Secondary processors spin on this value until it goes to 1. */ - .globl __secondary_hold_spinloop -__secondary_hold_spinloop: - .llong 0x0 - - /* Secondary processors write this value with their cpu # */ - /* after they enter the spin loop immediately below. */ - .globl __secondary_hold_acknowledge -__secondary_hold_acknowledge: - .llong 0x0 - - . = 0x60 -/* - * The following code is used on pSeries to hold secondary processors - * in a spin loop after they have been freed from OpenFirmware, but - * before the bulk of the kernel has been relocated. This code - * is relocated to physical address 0x60 before prom_init is run. - * All of it must fit below the first exception vector at 0x100. - */ -_GLOBAL(__secondary_hold) - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - - /* Grab our linux cpu number */ - mr r24,r3 - - /* Tell the master cpu we're here */ - /* Relocation is off & we are located at an address less */ - /* than 0x100, so only need to grab low order offset. */ - std r24,__secondary_hold_acknowledge@l(0) - sync - - /* All secondary cpus wait here until told to start. */ -100: ld r4,__secondary_hold_spinloop@l(0) - cmpdi 0,r4,1 - bne 100b - -#ifdef CONFIG_HMT - b .hmt_init -#else -#ifdef CONFIG_SMP - mr r3,r24 - b .pSeries_secondary_smp_init -#else - BUG_OPCODE -#endif -#endif - -/* This value is used to mark exception frames on the stack. */ - .section ".toc","aw" -exception_marker: - .tc ID_72656773_68657265[TC],0x7265677368657265 - .text - -/* - * The following macros define the code that appears as - * the prologue to each of the exception handlers. They - * are split into two parts to allow a single kernel binary - * to be used for pSeries and iSeries. - * LOL. One day... - paulus - */ - -/* - * We make as much of the exception code common between native - * exception handlers (including pSeries LPAR) and iSeries LPAR - * implementations as possible. - */ - -/* - * This is the start of the interrupt handlers for pSeries - * This code runs with relocation off. - */ -#define EX_R9 0 -#define EX_R10 8 -#define EX_R11 16 -#define EX_R12 24 -#define EX_R13 32 -#define EX_SRR0 40 -#define EX_DAR 48 -#define EX_DSISR 56 -#define EX_CCR 60 -#define EX_R3 64 -#define EX_LR 72 - -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9; \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - ori r12,r12,(label)@l; /* virt addr of handler */ \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -/* - * This is the start of the interrupt handlers for iSeries - * This code runs with relocation on. - */ -#define EXCEPTION_PROLOG_ISERIES_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9 - -#define EXCEPTION_PROLOG_ISERIES_2 \ - mfmsr r10; \ - ld r11,PACALPPACA+LPPACASRR0(r13); \ - ld r12,PACALPPACA+LPPACASRR1(r13); \ - ori r10,r10,MSR_RI; \ - mtmsrd r10,1 - -/* - * The common exception prolog is used for all except a few exceptions - * such as a segment miss on a kernel address. We have to be prepared - * to take another exception from the point where we first touch the - * kernel stack onwards. - * - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. - */ -#define EXCEPTION_PROLOG_COMMON(n, area) \ - andi. r10,r12,MSR_PR; /* See if coming from user */ \ - mr r10,r1; /* Save r1 */ \ - subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ - beq- 1f; \ - ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,bad_stack; /* abort if it is */ \ - std r9,_CCR(r1); /* save CR in stackframe */ \ - std r11,_NIP(r1); /* save SRR0 in stackframe */ \ - std r12,_MSR(r1); /* save SRR1 in stackframe */ \ - std r10,0(r1); /* make stack chain pointer */ \ - std r0,GPR0(r1); /* save r0 in stackframe */ \ - std r10,GPR1(r1); /* save r1 in stackframe */ \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ - ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ - ld r10,area+EX_R10(r13); \ - std r9,GPR9(r1); \ - std r10,GPR10(r1); \ - ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ - ld r10,area+EX_R12(r13); \ - ld r11,area+EX_R13(r13); \ - std r9,GPR11(r1); \ - std r10,GPR12(r1); \ - std r11,GPR13(r1); \ - ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ - mflr r9; /* save LR in stackframe */ \ - std r9,_LINK(r1); \ - mfctr r10; /* save CTR in stackframe */ \ - std r10,_CTR(r1); \ - mfspr r11,SPRN_XER; /* save XER in stackframe */ \ - std r11,_XER(r1); \ - li r9,(n)+1; \ - std r9,_TRAP(r1); /* set trap number */ \ - li r10,0; \ - ld r11,exception_marker@toc(r2); \ - std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ - -/* - * Exception vectors. - */ -#define STD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - -#define STD_EXCEPTION_ISERIES(n, label, area) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_ISERIES_1(area); \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common - -#define MASKABLE_EXCEPTION_ISERIES(n, label) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ - lbz r10,PACAPROCENABLED(r13); \ - cmpwi 0,r10,0; \ - beq- label##_iSeries_masked; \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common; \ - -#ifdef DO_SOFT_DISABLE -#define DISABLE_INTS \ - lbz r10,PACAPROCENABLED(r13); \ - li r11,0; \ - std r10,SOFTE(r1); \ - mfmsr r10; \ - stb r11,PACAPROCENABLED(r13); \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1 - -#define ENABLE_INTS \ - lbz r10,PACAPROCENABLED(r13); \ - mfmsr r11; \ - std r10,SOFTE(r1); \ - ori r11,r11,MSR_EE; \ - mtmsrd r11,1 - -#else /* hard enable/disable interrupts */ -#define DISABLE_INTS - -#define ENABLE_INTS \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - -#endif - -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite - -/* - * Start of pSeries system interrupt routines - */ - . = 0x100 - .globl __start_interrupts -__start_interrupts: - - STD_EXCEPTION_PSERIES(0x100, system_reset) - - . = 0x200 -_machine_check_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - - . = 0x300 - .globl data_access_pSeries -data_access_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq .do_stab_bolted_pSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) - - . = 0x380 - .globl data_access_slb_pSeries -data_access_slb_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ - mfcr r9 -#ifdef __DISABLED__ - /* Keep that around for when we re-implement dynamic VSIDs */ - cmpdi r3,0 - bge slb_miss_user_pseries -#endif /* __DISABLED__ */ - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - mfspr r12,SPRN_SRR1 /* and SRR1 */ - b .slb_miss_realmode /* Rel. branch works in real mode */ - - STD_EXCEPTION_PSERIES(0x400, instruction_access) - - . = 0x480 - .globl instruction_access_slb_pSeries -instruction_access_slb_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ - std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ - mfcr r9 -#ifdef __DISABLED__ - /* Keep that around for when we re-implement dynamic VSIDs */ - cmpdi r3,0 - bge slb_miss_user_pseries -#endif /* __DISABLED__ */ - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - mfspr r12,SPRN_SRR1 /* and SRR1 */ - b .slb_miss_realmode /* Rel. branch works in real mode */ - - STD_EXCEPTION_PSERIES(0x500, hardware_interrupt) - STD_EXCEPTION_PSERIES(0x600, alignment) - STD_EXCEPTION_PSERIES(0x700, program_check) - STD_EXCEPTION_PSERIES(0x800, fp_unavailable) - STD_EXCEPTION_PSERIES(0x900, decrementer) - STD_EXCEPTION_PSERIES(0xa00, trap_0a) - STD_EXCEPTION_PSERIES(0xb00, trap_0b) - - . = 0xc00 - .globl system_call_pSeries -system_call_pSeries: - HMT_MEDIUM - RUNLATCH_ON(r9) - mr r9,r13 - mfmsr r10 - mfspr r13,SPRN_SPRG3 - mfspr r11,SPRN_SRR0 - clrrdi r12,r13,32 - oris r12,r12,system_call_common@h - ori r12,r12,system_call_common@l - mtspr SPRN_SRR0,r12 - ori r10,r10,MSR_IR|MSR_DR|MSR_RI - mfspr r12,SPRN_SRR1 - mtspr SPRN_SRR1,r10 - rfid - b . /* prevent speculative execution */ - - STD_EXCEPTION_PSERIES(0xd00, single_step) - STD_EXCEPTION_PSERIES(0xe00, trap_0e) - - /* We need to deal with the Altivec unavailable exception - * here which is at 0xf20, thus in the middle of the - * prolog code of the PerformanceMonitor one. A little - * trickery is thus necessary - */ - . = 0xf00 - b performance_monitor_pSeries - - STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable) - - STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) - STD_EXCEPTION_PSERIES(0x1700, altivec_assist) - - . = 0x3000 - -/*** pSeries interrupt support ***/ - - /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(., performance_monitor) - - .align 7 -_GLOBAL(do_stab_bolted_pSeries) - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) - -/* - * We have some room here we use that to put - * the peries slb miss user trampoline code so it's reasonably - * away from slb_miss_user_common to avoid problems with rfid - * - * This is used for when the SLB miss handler has to go virtual, - * which doesn't happen for now anymore but will once we re-implement - * dynamic VSIDs for shared page tables - */ -#ifdef __DISABLED__ -slb_miss_user_pseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - clrrdi r12,r13,32 - mfmsr r10 - mfspr r11,SRR0 /* save SRR0 */ - ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI - mtspr SRR0,r12 - mfspr r12,SRR1 /* and SRR1 */ - mtspr SRR1,r10 - rfid - b . /* prevent spec. execution */ -#endif /* __DISABLED__ */ - -/* - * Vectors for the FWNMI option. Share common code. - */ - .globl system_reset_fwnmi -system_reset_fwnmi: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - - .globl machine_check_fwnmi -machine_check_fwnmi: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - -#ifdef CONFIG_PPC_ISERIES -/*** ISeries-LPAR interrupt handlers ***/ - - STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC) - - .globl data_access_iSeries -data_access_iSeries: - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq .do_stab_bolted_iSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN) - EXCEPTION_PROLOG_ISERIES_2 - b data_access_common - -.do_stab_bolted_iSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) - EXCEPTION_PROLOG_ISERIES_2 - b .do_stab_bolted - - .globl data_access_slb_iSeries -data_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACA+LPPACASRR1(r13); - b .slb_miss_realmode - - STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN) - - .globl instruction_access_slb_iSeries -instruction_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - ld r3,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge .slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACA+LPPACASRR1(r13); - b .slb_miss_realmode - -#ifdef __DISABLED__ -slb_miss_user_iseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - EXCEPTION_PROLOG_ISERIES_2 - b slb_miss_user_common -#endif - - MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt) - STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN) - MASKABLE_EXCEPTION_ISERIES(0x900, decrementer) - STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN) - - .globl system_call_iSeries -system_call_iSeries: - mr r9,r13 - mfspr r13,SPRN_SPRG3 - EXCEPTION_PROLOG_ISERIES_2 - b system_call_common - - STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN) - - .globl system_reset_iSeries -system_reset_iSeries: - mfspr r13,SPRN_SPRG3 /* Get paca address */ - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - lhz r24,PACAPACAINDEX(r13) /* Get processor # */ - cmpwi 0,r24,0 /* Are we processor 0? */ - beq .__start_initialization_iSeries /* Start up the first processor */ - mfspr r4,SPRN_CTRLF - li r5,CTRL_RUNLATCH /* Turn off the run light */ - andc r4,r4,r5 - mtspr SPRN_CTRLT,r4 - -1: - HMT_LOW -#ifdef CONFIG_SMP - lbz r23,PACAPROCSTART(r13) /* Test if this processor - * should start */ - sync - LOADADDR(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r3,r3,r28 - addi r1,r3,THREAD_SIZE - subi r1,r1,STACK_FRAME_OVERHEAD - - cmpwi 0,r23,0 - beq iSeries_secondary_smp_loop /* Loop until told to go */ - bne .__secondary_start /* Loop until told to go */ -iSeries_secondary_smp_loop: - /* Let the Hypervisor know we are alive */ - /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ - lis r3,0x8002 - rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ -#else /* CONFIG_SMP */ - /* Yield the processor. This is required for non-SMP kernels - which are running on multi-threaded machines. */ - lis r3,0x8000 - rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ - addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ - li r4,0 /* "yield timed" */ - li r5,-1 /* "yield forever" */ -#endif /* CONFIG_SMP */ - li r0,-1 /* r0=-1 indicates a Hypervisor call */ - sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ - b 1b /* If SMP not configured, secondaries - * loop forever */ - - .globl decrementer_iSeries_masked -decrementer_iSeries_masked: - li r11,1 - stb r11,PACALPPACA+LPPACADECRINT(r13) - lwz r12,PACADEFAULTDECR(r13) - mtspr SPRN_DEC,r12 - /* fall through */ - - .globl hardware_interrupt_iSeries_masked -hardware_interrupt_iSeries_masked: - mtcrf 0x80,r9 /* Restore regs */ - ld r11,PACALPPACA+LPPACASRR0(r13) - ld r12,PACALPPACA+LPPACASRR1(r13) - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_ISERIES */ - -/*** Common interrupt handlers ***/ - - STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) - - /* - * Machine check is different because we use a different - * save area: PACA_EXMC instead of PACA_EXGEN. - */ - .align 7 - .globl machine_check_common -machine_check_common: - EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) - DISABLE_INTS - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_exception - b .ret_from_except - - STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) - STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) - STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) - STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) - STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception) - STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) -#ifdef CONFIG_ALTIVEC - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) -#else - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) -#endif - -/* - * Here we have detected that the kernel stack pointer is bad. - * R9 contains the saved CR, r13 points to the paca, - * r10 contains the (bad) kernel stack pointer, - * r11 and r12 contain the saved SRR0 and SRR1. - * We switch to using an emergency stack, save the registers there, - * and call kernel_bad_stack(), which panics. - */ -bad_stack: - ld r1,PACAEMERGSP(r13) - subi r1,r1,64+INT_FRAME_SIZE - std r9,_CCR(r1) - std r10,GPR1(r1) - std r11,_NIP(r1) - std r12,_MSR(r1) - mfspr r11,SPRN_DAR - mfspr r12,SPRN_DSISR - std r11,_DAR(r1) - std r12,_DSISR(r1) - mflr r10 - mfctr r11 - mfxer r12 - std r10,_LINK(r1) - std r11,_CTR(r1) - std r12,_XER(r1) - SAVE_GPR(0,r1) - SAVE_GPR(2,r1) - SAVE_4GPRS(3,r1) - SAVE_2GPRS(7,r1) - SAVE_10GPRS(12,r1) - SAVE_10GPRS(22,r1) - addi r11,r1,INT_FRAME_SIZE - std r11,0(r1) - li r12,0 - std r12,0(r11) - ld r2,PACATOC(r13) -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_bad_stack - b 1b - -/* - * Return from an exception with minimal checks. - * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. - * If interrupts have been enabled, or anything has been - * done that might have changed the scheduling status of - * any task or sent any task a signal, you should use - * ret_from_except or ret_from_except_lite instead of this. - */ - .globl fast_exception_return -fast_exception_return: - ld r12,_MSR(r1) - ld r11,_NIP(r1) - andi. r3,r12,MSR_RI /* check if RI is set */ - beq- unrecov_fer - ld r3,_CCR(r1) - ld r4,_LINK(r1) - ld r5,_CTR(r1) - ld r6,_XER(r1) - mtcr r3 - mtlr r4 - mtctr r5 - mtxer r6 - REST_GPR(0, r1) - REST_8GPRS(2, r1) - - mfmsr r10 - clrrdi r10,r10,2 /* clear RI (LE is 0 already) */ - mtmsrd r10,1 - - mtspr SPRN_SRR1,r12 - mtspr SPRN_SRR0,r11 - REST_4GPRS(10, r1) - ld r1,GPR1(r1) - rfid - b . /* prevent speculative execution */ - -unrecov_fer: - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -/* - * Here r13 points to the paca, r9 contains the saved CR, - * SRR0 and SRR1 are saved in r11 and r12, - * r9 - r13 are saved in paca->exgen. - */ - .align 7 - .globl data_access_common -data_access_common: - RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */ - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - li r5,0x300 - b .do_hash_page /* Try to handle as hpte fault */ - - .align 7 - .globl instruction_access_common -instruction_access_common: - EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) - ld r3,_NIP(r1) - andis. r4,r12,0x5820 - li r5,0x400 - b .do_hash_page /* Try to handle as hpte fault */ - -/* - * Here is the common SLB miss user that is used when going to virtual - * mode for SLB misses, that is currently not used - */ -#ifdef __DISABLED__ - .align 7 - .globl slb_miss_user_common -slb_miss_user_common: - mflr r10 - std r3,PACA_EXGEN+EX_DAR(r13) - stw r9,PACA_EXGEN+EX_CCR(r13) - std r10,PACA_EXGEN+EX_LR(r13) - std r11,PACA_EXGEN+EX_SRR0(r13) - bl .slb_allocate_user - - ld r10,PACA_EXGEN+EX_LR(r13) - ld r3,PACA_EXGEN+EX_R3(r13) - lwz r9,PACA_EXGEN+EX_CCR(r13) - ld r11,PACA_EXGEN+EX_SRR0(r13) - mtlr r10 - beq- slb_miss_fault - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_user_slb - mfmsr r10 - -.machine push -.machine "power4" - mtcrf 0x80,r9 -.machine pop - - clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ - mtmsrd r10,1 - - mtspr SRR0,r11 - mtspr SRR1,r12 - - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . - -slb_miss_fault: - EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) - ld r4,PACA_EXGEN+EX_DAR(r13) - li r5,0 - std r4,_DAR(r1) - std r5,_DSISR(r1) - b .handle_page_fault - -unrecov_user_slb: - EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -#endif /* __DISABLED__ */ - - -/* - * r13 points to the PACA, r9 contains the saved CR, - * r12 contain the saved SRR1, SRR0 is still ready for return - * r3 has the faulting address - * r9 - r13 are saved in paca->exslb. - * r3 is saved in paca->slb_r3 - * We assume we aren't going to take any exceptions during this procedure. - */ -_GLOBAL(slb_miss_realmode) - mflr r10 - - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - - bl .slb_allocate_realmode - - /* All done -- return from exception. */ - - ld r10,PACA_EXSLB+EX_LR(r13) - ld r3,PACA_EXSLB+EX_R3(r13) - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ -#ifdef CONFIG_PPC_ISERIES - ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ -#endif /* CONFIG_PPC_ISERIES */ - - mtlr r10 - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_slb - -.machine push -.machine "power4" - mtcrf 0x80,r9 - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ -.machine pop - -#ifdef CONFIG_PPC_ISERIES - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 -#endif /* CONFIG_PPC_ISERIES */ - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -unrecov_slb: - EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - - .align 7 - .globl hardware_interrupt_common - .globl hardware_interrupt_entry -hardware_interrupt_common: - EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) -hardware_interrupt_entry: - DISABLE_INTS - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite - - .align 7 - .globl alignment_common -alignment_common: - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN) - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - std r3,_DAR(r1) - std r4,_DSISR(r1) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .alignment_exception - b .ret_from_except - - .align 7 - .globl program_check_common -program_check_common: - EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .program_check_exception - b .ret_from_except - - .align 7 - .globl fp_unavailable_common -fp_unavailable_common: - EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) - bne .load_up_fpu /* if from user, just load it up */ - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .kernel_fp_unavailable_exception - BUG_OPCODE - - .align 7 - .globl altivec_unavailable_common -altivec_unavailable_common: - EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) -#ifdef CONFIG_ALTIVEC -BEGIN_FTR_SECTION - bne .load_up_altivec /* if from user, just load it up */ -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) -#endif - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .altivec_unavailable_exception - b .ret_from_except - -#ifdef CONFIG_ALTIVEC -/* - * load_up_altivec(unused, unused, tsk) - * Disable VMX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - * On SMP we know the VMX is free, since we give it up every - * switch (ie, no lazy save of the vector registers). - * On entry: r13 == 'current' && last_task_used_altivec != 'current' - */ -_STATIC(load_up_altivec) - mfmsr r5 /* grab the current MSR */ - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - -/* - * For SMP, we don't do lazy VMX switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altvec in switch_to. - * VRSAVE isn't dealt with here, that is done in the normal context - * switch code. Note that we could rely on vrsave value to eventually - * avoid saving all of the VREGs here... - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_altivec@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save VMX state to last_task_used_altivec's THREAD struct */ - addi r4,r4,THREAD - SAVE_32VRS(0,r5,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - /* Disable VMX for last_task_used_altivec */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VEC@h - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* Hack: if we get an altivec unavailable trap with VRSAVE - * set to all zeros, we assume this is a broken application - * that fails to set it properly, and thus we switch it to - * all 1's - */ - mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 - bne+ 1f - li r4,-1 - mtspr SPRN_VRSAVE,r4 -1: - /* enable use of VMX after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - oris r12,r12,MSR_VEC@h - std r12,_MSR(r1) - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r4,r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return -#endif /* CONFIG_ALTIVEC */ - -/* - * Hash table stuff - */ - .align 7 -_GLOBAL(do_hash_page) - std r3,_DAR(r1) - std r4,_DSISR(r1) - - andis. r0,r4,0xa450 /* weird error? */ - bne- .handle_page_fault /* if not, try to insert a HPTE */ -BEGIN_FTR_SECTION - andis. r0,r4,0x0020 /* Is it a segment table fault? */ - bne- .do_ste_alloc /* If so handle it */ -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - - /* - * We need to set the _PAGE_USER bit if MSR_PR is set or if we are - * accessing a userspace segment (even from the kernel). We assume - * kernel addresses always have the high bit set. - */ - rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */ - rotldi r0,r3,15 /* Move high bit into MSR_PR posn */ - orc r0,r12,r0 /* MSR_PR | ~high_bit */ - rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */ - ori r4,r4,1 /* add _PAGE_PRESENT */ - rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ - - /* - * On iSeries, we soft-disable interrupts here, then - * hard-enable interrupts so that the hash_page code can spin on - * the hash_table_lock without problems on a shared processor. - */ - DISABLE_INTS - - /* - * r3 contains the faulting address - * r4 contains the required access permissions - * r5 contains the trap number - * - * at return r3 = 0 for success - */ - bl .hash_page /* build HPTE if possible */ - cmpdi r3,0 /* see if hash_page succeeded */ - -#ifdef DO_SOFT_DISABLE - /* - * If we had interrupts soft-enabled at the point where the - * DSI/ISI occurred, and an interrupt came in during hash_page, - * handle it now. - * We jump to ret_from_except_lite rather than fast_exception_return - * because ret_from_except_lite will check for and handle pending - * interrupts if necessary. - */ - beq .ret_from_except_lite - /* For a hash failure, we don't bother re-enabling interrupts */ - ble- 12f - - /* - * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .local_irq_restore - * handles any interrupts pending at this point. - */ - ld r3,SOFTE(r1) - bl .local_irq_restore - b 11f -#else - beq fast_exception_return /* Return from exception on success */ - ble- 12f /* Failure return from hash_page */ - - /* fall through */ -#endif - -/* Here we have a page fault that hash_page can't handle. */ -_GLOBAL(handle_page_fault) - ENABLE_INTS -11: ld r4,_DAR(r1) - ld r5,_DSISR(r1) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_page_fault - cmpdi r3,0 - beq+ .ret_from_except_lite - bl .save_nvgprs - mr r5,r3 - addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) - bl .bad_page_fault - b .ret_from_except - -/* We have a page fault that hash_page could handle but HV refused - * the PTE insertion - */ -12: bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) - bl .low_hash_fault - b .ret_from_except - - /* here we have a segment miss */ -_GLOBAL(do_ste_alloc) - bl .ste_allocate /* try to insert stab entry */ - cmpdi r3,0 - beq+ fast_exception_return - b .handle_page_fault - -/* - * r13 points to the PACA, r9 contains the saved CR, - * r11 and r12 contain the saved SRR0 and SRR1. - * r9 - r13 are saved in paca->exslb. - * We assume we aren't going to take any exceptions during this procedure. - * We assume (DAR >> 60) == 0xc. - */ - .align 7 -_GLOBAL(do_stab_bolted) - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ - - /* Hash to the primary group */ - ld r10,PACASTABVIRT(r13) - mfspr r11,SPRN_DAR - srdi r11,r11,28 - rldimi r10,r11,7,52 /* r10 = first ste of the group */ - - /* Calculate VSID */ - /* This is a kernel address, so protovsid = ESID */ - ASM_VSID_SCRAMBLE(r11, r9) - rldic r9,r11,12,16 /* r9 = vsid << 12 */ - - /* Search the primary group for a free entry */ -1: ld r11,0(r10) /* Test valid bit of the current ste */ - andi. r11,r11,0x80 - beq 2f - addi r10,r10,16 - andi. r11,r10,0x70 - bne 1b - - /* Stick for only searching the primary group for now. */ - /* At least for now, we use a very simple random castout scheme */ - /* Use the TB as a random number ; OR in 1 to avoid entry 0 */ - mftb r11 - rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */ - ori r11,r11,0x10 - - /* r10 currently points to an ste one past the group of interest */ - /* make it point to the randomly selected entry */ - subi r10,r10,128 - or r10,r10,r11 /* r10 is the entry to invalidate */ - - isync /* mark the entry invalid */ - ld r11,0(r10) - rldicl r11,r11,56,1 /* clear the valid bit */ - rotldi r11,r11,8 - std r11,0(r10) - sync - - clrrdi r11,r11,28 /* Get the esid part of the ste */ - slbie r11 - -2: std r9,8(r10) /* Store the vsid part of the ste */ - eieio - - mfspr r11,SPRN_DAR /* Get the new esid */ - clrrdi r11,r11,28 /* Permits a full 32b of ESID */ - ori r11,r11,0x90 /* Turn on valid and kp */ - std r11,0(r10) /* Put new entry back into the stab */ - - sync - - /* All done -- return from exception. */ - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ - ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */ - - andi. r10,r12,MSR_RI - beq- unrecov_slb - - mtcrf 0x80,r9 /* restore CR */ - - mfmsr r10 - clrrdi r10,r10,2 - mtmsrd r10,1 - - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -/* - * Space for CPU0's segment table. - * - * On iSeries, the hypervisor must fill in at least one entry before - * we get control (with relocate on). The address is give to the hv - * as a page number (see xLparMap in lpardata.c), so this must be at a - * fixed address (the linker can't compute (u64)&initial_stab >> - * PAGE_SHIFT). - */ - . = STAB0_PHYS_ADDR /* 0x6000 */ - .globl initial_stab -initial_stab: - .space 4096 - -/* - * Data area reserved for FWNMI option. - * This address (0x7000) is fixed by the RPA. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - - /* iSeries does not use the FWNMI stuff, so it is safe to put - * this here, even if we later allow kernels that will boot on - * both pSeries and iSeries */ -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS -#include "lparmap.s" -/* - * This ".text" is here for old compilers that generate a trailing - * .note section when compiling .c files to .s - */ - .text -#endif /* CONFIG_PPC_ISERIES */ - - . = 0x8000 - -/* - * On pSeries, secondary processors spin in the following code. - * At entry, r3 = this processor's number (physical cpu id) - */ -_GLOBAL(pSeries_secondary_smp_init) - mr r24,r3 - - /* turn on 64-bit mode */ - bl .enable_64b_mode - isync - - /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup - - /* Set up a paca value for this processor. Since we have the - * physical cpu id in r24, we need to search the pacas to find - * which logical id maps to our physical one. - */ - LOADADDR(r13, paca) /* Get base vaddr of paca array */ - li r5,0 /* logical cpu id */ -1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */ - cmpw r6,r24 /* Compare to our id */ - beq 2f - addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */ - addi r5,r5,1 - cmpwi r5,NR_CPUS - blt 1b - - mr r3,r24 /* not found, copy phys to r3 */ - b .kexec_wait /* next kernel might do better */ - -2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ - /* From now on, r24 is expected to be logical cpuid */ - mr r24,r5 -3: HMT_LOW - lbz r23,PACAPROCSTART(r13) /* Test if this processor should */ - /* start. */ - sync - - /* Create a temp kernel stack for use before relocation is on. */ - ld r1,PACAEMERGSP(r13) - subi r1,r1,STACK_FRAME_OVERHEAD - - cmpwi 0,r23,0 -#ifdef CONFIG_SMP - bne .__secondary_start -#endif - b 3b /* Loop until told to go */ - -#ifdef CONFIG_PPC_ISERIES -_STATIC(__start_initialization_iSeries) - /* Clear out the BSS */ - LOADADDR(r11,__bss_stop) - LOADADDR(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - LOADADDR(r1,init_thread_union) - addi r1,r1,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - LOADADDR(r3,cpu_specs) - LOADADDR(r4,cur_cpu_spec) - li r5,0 - bl .identify_cpu - - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - - bl .iSeries_early_setup - bl .early_setup - - /* relocation is on at this point */ - - b .start_here_common -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_PPC_MULTIPLATFORM - -_STATIC(__mmu_off) - mfmsr r3 - andi. r0,r3,MSR_IR|MSR_DR - beqlr - andc r3,r3,r0 - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - sync - rfid - b . /* prevent speculative execution */ - - -/* - * Here is our main kernel entry point. We support currently 2 kind of entries - * depending on the value of r5. - * - * r5 != NULL -> OF entry, we go to prom_init, "legacy" parameter content - * in r3...r7 - * - * r5 == NULL -> kexec style entry. r3 is a physical pointer to the - * DT block, r4 is a physical pointer to the kernel itself - * - */ -_GLOBAL(__start_initialization_multiplatform) - /* - * Are we booted from a PROM Of-type client-interface ? - */ - cmpldi cr0,r5,0 - bne .__boot_from_prom /* yes -> prom */ - - /* Save parameters */ - mr r31,r3 - mr r30,r4 - - /* Make sure we are running in 64 bits mode */ - bl .enable_64b_mode - - /* Setup some critical 970 SPRs before switching MMU off */ - bl .__970_cpu_preinit - - /* cpu # */ - li r24,0 - - /* Switch off MMU if not already */ - LOADADDR(r4, .__after_prom_start - KERNELBASE) - add r4,r4,r30 - bl .__mmu_off - b .__after_prom_start - -_STATIC(__boot_from_prom) - /* Save parameters */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 - - /* Make sure we are running in 64 bits mode */ - bl .enable_64b_mode - - /* put a relocation offset into r3 */ - bl .reloc_offset - - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - - /* Relocate the TOC from a virt addr to a real addr */ - sub r2,r2,r3 - - /* Restore parameters */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 - - /* Do all of the interaction with OF client interface */ - bl .prom_init - /* We never return */ - trap - -/* - * At this point, r3 contains the physical address we are running at, - * returned by prom_init() - */ -_STATIC(__after_prom_start) - -/* - * We need to run with __start at physical address 0. - * This will leave some code in the first 256B of - * real memory, which are reserved for software use. - * The remainder of the first page is loaded with the fixed - * interrupt vectors. The next two pages are filled with - * unknown exception placeholders. - * - * Note: This process overwrites the OF exception vectors. - * r26 == relocation offset - * r27 == KERNELBASE - */ - bl .reloc_offset - mr r26,r3 - SET_REG_TO_CONST(r27,KERNELBASE) - - li r3,0 /* target addr */ - - // XXX FIXME: Use phys returned by OF (r30) - sub r4,r27,r26 /* source addr */ - /* current address of _start */ - /* i.e. where we are running */ - /* the source addr */ - - LOADADDR(r5,copy_to_here) /* # bytes of memory to copy */ - sub r5,r5,r27 - - li r6,0x100 /* Start offset, the first 0x100 */ - /* bytes were copied earlier. */ - - bl .copy_and_flush /* copy the first n bytes */ - /* this includes the code being */ - /* executed here. */ - - LOADADDR(r0, 4f) /* Jump to the copy of this code */ - mtctr r0 /* that we just made/relocated */ - bctr - -4: LOADADDR(r5,klimit) - sub r5,r5,r26 - ld r5,0(r5) /* get the value of klimit */ - sub r5,r5,r27 - bl .copy_and_flush /* copy the rest */ - b .start_here_multiplatform - -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -/* - * Copy routine used to copy the kernel to start at physical address 0 - * and flush and invalidate the caches as needed. - * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset - * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5. - * - * Note: this routine *only* clobbers r0, r6 and lr - */ -_GLOBAL(copy_and_flush) - addi r5,r5,-8 - addi r6,r6,-8 -4: li r0,16 /* Use the least common */ - /* denominator cache line */ - /* size. This results in */ - /* extra cache line flushes */ - /* but operation is correct. */ - /* Can't get cache line size */ - /* from NACA as it is being */ - /* moved too. */ - - mtctr r0 /* put # words/line in ctr */ -3: addi r6,r6,8 /* copy a cache line */ - ldx r0,r6,r4 - stdx r0,r6,r3 - bdnz 3b - dcbst r6,r3 /* write it to memory */ - sync - icbi r6,r3 /* flush the icache line */ - cmpld 0,r6,r5 - blt 4b - sync - addi r5,r5,8 - addi r6,r6,8 - blr - -.align 8 -copy_to_here: - -#ifdef CONFIG_SMP -#ifdef CONFIG_PPC_PMAC -/* - * On PowerMac, secondary processors starts from the reset vector, which - * is temporarily turned into a call to one of the functions below. - */ - .section ".text"; - .align 2 ; - - .globl __secondary_start_pmac_0 -__secondary_start_pmac_0: - /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ - li r24,0 - b 1f - li r24,1 - b 1f - li r24,2 - b 1f - li r24,3 -1: - -_GLOBAL(pmac_secondary_start) - /* turn on 64-bit mode */ - bl .enable_64b_mode - isync - - /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup - - /* pSeries do that early though I don't think we really need it */ - mfmsr r3 - ori r3,r3,MSR_RI - mtmsrd r3 /* RI on */ - - /* Set up a paca value for this processor. */ - LOADADDR(r4, paca) /* Get base vaddr of paca array */ - mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r4 /* for this processor. */ - mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ - - /* Create a temp kernel stack for use before relocation is on. */ - ld r1,PACAEMERGSP(r13) - subi r1,r1,STACK_FRAME_OVERHEAD - - b .__secondary_start - -#endif /* CONFIG_PPC_PMAC */ - -/* - * This function is called after the master CPU has released the - * secondary processors. The execution environment is relocation off. - * The paca for this processor has the following fields initialized at - * this point: - * 1. Processor number - * 2. Segment table pointer (virtual address) - * On entry the following are set: - * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries - * r24 = cpu# (in Linux terms) - * r13 = paca virtual address - * SPRG3 = paca virtual address - */ -_GLOBAL(__secondary_start) - - HMT_MEDIUM /* Set thread priority to MEDIUM */ - - ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ -BEGIN_FTR_SECTION - bl .stab_initialize -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - bl .slb_initialize - - /* Initialize the kernel stack. Just a repeat for iSeries. */ - LOADADDR(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r1,r3,r28 - addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD - std r1,PACAKSAVE(r13) - - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif - li r7,0 - mtlr r7 - - /* enable MMU and jump to start_secondary */ - LOADADDR(r3,.start_secondary_prolog) - SET_REG_TO_CONST(r4, MSR_KERNEL) -#ifdef DO_SOFT_DISABLE - ori r4,r4,MSR_EE -#endif - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfid - b . /* prevent speculative execution */ - -/* - * Running with relocation on at this point. All we want to do is - * zero the stack back-chain pointer before going into C code. - */ -_GLOBAL(start_secondary_prolog) - li r3,0 - std r3,0(r1) /* Zero the stack frame pointer */ - bl .start_secondary -#endif - -/* - * This subroutine clobbers r11 and r12 - */ -_GLOBAL(enable_64b_mode) - mfmsr r11 /* grab the current MSR */ - li r12,1 - rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) - or r11,r11,r12 - li r12,1 - rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) - or r11,r11,r12 - mtmsrd r11 - isync - blr - -#ifdef CONFIG_PPC_MULTIPLATFORM -/* - * This is where the main kernel code starts. - */ -_STATIC(start_here_multiplatform) - /* get a new offset, now that the kernel has moved. */ - bl .reloc_offset - mr r26,r3 - - /* Clear out the BSS. It may have been done in prom_init, - * already but that's irrelevant since prom_init will soon - * be detached from the kernel completely. Besides, we need - * to clear it now for kexec-style entry. - */ - LOADADDR(r11,__bss_stop) - LOADADDR(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - - mfmsr r6 - ori r6,r6,MSR_RI - mtmsrd r6 /* RI on */ - -#ifdef CONFIG_HMT - /* Start up the second thread on cpu 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x34 /* Pulsar */ - beq 90f - cmpwi r3,0x36 /* Icestar */ - beq 90f - cmpwi r3,0x37 /* SStar */ - beq 90f - b 91f /* HMT not supported */ -90: li r3,0 - bl .hmt_start_secondary -91: -#endif - - /* The following gets the stack and TOC set up with the regs */ - /* pointing to the real addr of the kernel stack. This is */ - /* all done to support the C function call below which sets */ - /* up the htab. This is done because we have relocated the */ - /* kernel but are still running in real mode. */ - - LOADADDR(r3,init_thread_union) - sub r3,r3,r26 - - /* set up a stack pointer (physical address) */ - addi r1,r3,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - /* set up the TOC (physical address) */ - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - sub r2,r2,r26 - - LOADADDR(r3,cpu_specs) - sub r3,r3,r26 - LOADADDR(r4,cur_cpu_spec) - sub r4,r4,r26 - mr r5,r26 - bl .identify_cpu - - /* Save some low level config HIDs of CPU0 to be copied to - * other CPUs later on, or used for suspend/resume - */ - bl .__save_cpu_setup - sync - - /* Setup a valid physical PACA pointer in SPRG3 for early_setup - * note that boot_cpuid can always be 0 nowadays since there is - * nowhere it can be initialized differently before we reach this - * code - */ - LOADADDR(r27, boot_cpuid) - sub r27,r27,r26 - lwz r27,0(r27) - - LOADADDR(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - sub r13,r13,r26 /* convert to physical addr */ - mtspr SPRN_SPRG3,r13 /* PPPBBB: Temp... -Peter */ - - /* Do very early kernel initializations, including initial hash table, - * stab and slb setup before we turn on relocation. */ - - /* Restore parameters passed from prom_init/kexec */ - mr r3,r31 - bl .early_setup - - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - sub r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: - LOADADDR(r3,.start_here_common) - SET_REG_TO_CONST(r4, MSR_KERNEL) - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfid - b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_MULTIPLATFORM */ - - /* This is where all platforms converge execution */ -_STATIC(start_here_common) - /* relocation is on at this point */ - - /* The following code sets up the SP and TOC now that we are */ - /* running with translation enabled. */ - - LOADADDR(r3,init_thread_union) - - /* set up the stack */ - addi r1,r3,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - /* Apply the CPUs-specific fixups (nop out sections not relevant - * to this CPU - */ - li r3,0 - bl .do_cpu_ftr_fixups - - LOADADDR(r26, boot_cpuid) - lwz r26,0(r26) - - LOADADDR(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - mtspr SPRN_SPRG3,r13 - - /* ptr to current */ - LOADADDR(r4,init_task) - std r4,PACACURRENT(r13) - - /* Load the TOC */ - ld r2,PACATOC(r13) - std r1,PACAKSAVE(r13) - - bl .setup_system - - /* Load up the kernel context */ -5: -#ifdef DO_SOFT_DISABLE - li r5,0 - stb r5,PACAPROCENABLED(r13) /* Soft Disabled */ - mfmsr r5 - ori r5,r5,MSR_EE /* Hard Enabled */ - mtmsrd r5 -#endif - - bl .start_kernel - -_GLOBAL(hmt_init) -#ifdef CONFIG_HMT - LOADADDR(r5, hmt_thread_data) - mfspr r7,SPRN_PVR - srwi r7,r7,16 - cmpwi r7,0x34 /* Pulsar */ - beq 90f - cmpwi r7,0x36 /* Icestar */ - beq 91f - cmpwi r7,0x37 /* SStar */ - beq 91f - b 101f -90: mfspr r6,SPRN_PIR - andi. r6,r6,0x1f - b 92f -91: mfspr r6,SPRN_PIR - andi. r6,r6,0x3ff -92: sldi r4,r24,3 - stwx r6,r5,r4 - bl .hmt_start_secondary - b 101f - -__hmt_secondary_hold: - LOADADDR(r5, hmt_thread_data) - clrldi r5,r5,4 - li r7,0 - mfspr r6,SPRN_PIR - mfspr r8,SPRN_PVR - srwi r8,r8,16 - cmpwi r8,0x34 - bne 93f - andi. r6,r6,0x1f - b 103f -93: andi. r6,r6,0x3f - -103: lwzx r8,r5,r7 - cmpw r8,r6 - beq 104f - addi r7,r7,8 - b 103b - -104: addi r7,r7,4 - lwzx r9,r5,r7 - mr r24,r9 -101: -#endif - mr r3,r24 - b .pSeries_secondary_smp_init - -#ifdef CONFIG_HMT -_GLOBAL(hmt_start_secondary) - LOADADDR(r4,__hmt_secondary_hold) - clrldi r4,r4,4 - mtspr SPRN_NIADORM, r4 - mfspr r4, SPRN_MSRDORM - li r5, -65 - and r4, r4, r5 - mtspr SPRN_MSRDORM, r4 - lis r4,0xffef - ori r4,r4,0x7403 - mtspr SPRN_TSC, r4 - li r4,0x1f4 - mtspr SPRN_TST, r4 - mfspr r4, SPRN_HID0 - ori r4, r4, 0x1 - mtspr SPRN_HID0, r4 - mfspr r4, SPRN_CTRLF - oris r4, r4, 0x40 - mtspr SPRN_CTRLT, r4 - blr -#endif - -/* - * We put a few things here that have to be page-aligned. - * This stuff goes at the beginning of the bss, which is page-aligned. - */ - .section ".bss" - - .align PAGE_SHIFT - - .globl empty_zero_page -empty_zero_page: - .space PAGE_SIZE - - .globl swapper_pg_dir -swapper_pg_dir: - .space PAGE_SIZE - -/* - * This space gets a copy of optional info passed to us by the bootstrap - * Used to pass parameters into the kernel like root=/dev/sda1, etc. - */ - .globl cmd_line -cmd_line: - .space COMMAND_LINE_SIZE diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 8abd2ad92832..b879d3057ef8 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -26,22 +26,18 @@ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/time.h> -#include <asm/systemcfg.h> #include <asm/machdep.h> +#include <asm/smp.h> extern void power4_idle(void); void default_idle(void) { - long oldval; unsigned int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { while (!need_resched() && !cpu_is_offline(cpu)) { ppc64_runlatch_off(); @@ -54,13 +50,12 @@ void default_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); } @@ -76,7 +71,9 @@ void native_idle(void) if (need_resched()) { ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } if (cpu_is_offline(smp_processor_id()) && diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S deleted file mode 100644 index 077507ffbab8..000000000000 --- a/arch/ppc64/kernel/misc.S +++ /dev/null @@ -1,869 +0,0 @@ -/* - * arch/ppc/kernel/misc.S - * - * - * - * This file contains miscellaneous low-level functions. - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras. - * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) - * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <linux/sys.h> -#include <asm/unistd.h> -#include <asm/errno.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cache.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> - - .text - -/* - * Returns (address we were linked at) - (address we are running at) - * for use before the text and data are mapped to KERNELBASE. - */ - -_GLOBAL(reloc_offset) - mflr r0 - bl 1f -1: mflr r3 - LOADADDR(r4,1b) - sub r3,r4,r3 - mtlr r0 - blr - -_GLOBAL(get_msr) - mfmsr r3 - blr - -_GLOBAL(get_dar) - mfdar r3 - blr - -_GLOBAL(get_srr0) - mfsrr0 r3 - blr - -_GLOBAL(get_srr1) - mfsrr1 r3 - blr - -_GLOBAL(get_sp) - mr r3,r1 - blr - -#ifdef CONFIG_IRQSTACKS -_GLOBAL(call_do_softirq) - mflr r0 - std r0,16(r1) - stdu r1,THREAD_SIZE-112(r3) - mr r1,r3 - bl .__do_softirq - ld r1,0(r1) - ld r0,16(r1) - mtlr r0 - blr - -_GLOBAL(call_handle_IRQ_event) - mflr r0 - std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event - ld r1,0(r1) - ld r0,16(r1) - mtlr r0 - blr -#endif /* CONFIG_IRQSTACKS */ - - /* - * To be called by C code which needs to do some operations with MMU - * disabled. Note that interrupts have to be disabled by the caller - * prior to calling us. The code called _MUST_ be in the RMO of course - * and part of the linear mapping as we don't attempt to translate the - * stack pointer at all. The function is called with the stack switched - * to this CPU emergency stack - * - * prototype is void *call_with_mmu_off(void *func, void *data); - * - * the called function is expected to be of the form - * - * void *called(void *data); - */ -_GLOBAL(call_with_mmu_off) - mflr r0 /* get link, save it on stackframe */ - std r0,16(r1) - mr r1,r5 /* save old stack ptr */ - ld r1,PACAEMERGSP(r13) /* get emerg. stack */ - subi r1,r1,STACK_FRAME_OVERHEAD - std r0,16(r1) /* save link on emerg. stack */ - std r5,0(r1) /* save old stack ptr in backchain */ - ld r3,0(r3) /* get to real function ptr (assume same TOC) */ - bl 2f /* we need LR to return, continue at label 2 */ - - ld r0,16(r1) /* we return here from the call, get LR and */ - ld r1,0(r1) /* .. old stack ptr */ - mtspr SPRN_SRR0,r0 /* and get back to virtual mode with these */ - mfmsr r4 - ori r4,r4,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r4 - rfid - -2: mtspr SPRN_SRR0,r3 /* coming from above, enter real mode */ - mr r3,r4 /* get parameter */ - mfmsr r0 - ori r0,r0,MSR_IR|MSR_DR - xori r0,r0,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r0 - rfid - - - .section ".toc","aw" -PPC64_CACHES: - .tc ppc64_caches[TC],ppc64_caches - .section ".text" - -/* - * Write any modified data cache blocks out to memory - * and invalidate the corresponding instruction cache blocks. - * - * flush_icache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start through stop-1 inclusive - */ - -_KPROBE(__flush_icache_range) - -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - * and in some cases i-cache and d-cache line sizes differ from - * each other. - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -1: dcbst 0,r6 - add r6,r6,r7 - bdnz 1b - sync - -/* Now invalidate the instruction cache */ - - lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 - lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -2: icbi 0,r6 - add r6,r6,r7 - bdnz 2b - isync - blr - .previous .text -/* - * Like above, but only do the D-cache. - * - * flush_dcache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start to stop-1 inclusive - */ -_GLOBAL(flush_dcache_range) - -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -0: dcbst 0,r6 - add r6,r6,r7 - bdnz 0b - sync - blr - -/* - * Like above, but works on non-mapped physical addresses. - * Use only for non-LPAR setups ! It also assumes real mode - * is cacheable. Used for flushing out the DART before using - * it as uncacheable memory - * - * flush_dcache_phys_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start to stop-1 inclusive - */ -_GLOBAL(flush_dcache_phys_range) - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mfmsr r5 /* Disable MMU Data Relocation */ - ori r0,r5,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsr r0 - sync - isync - mtctr r8 -0: dcbst 0,r6 - add r6,r6,r7 - bdnz 0b - sync - isync - mtmsr r5 /* Re-enable MMU Data Relocation */ - sync - isync - blr - -_GLOBAL(flush_inval_dcache_range) - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - sync - isync - mtctr r8 -0: dcbf 0,r6 - add r6,r6,r7 - bdnz 0b - sync - isync - blr - - -/* - * Flush a particular page from the data cache to RAM. - * Note: this is necessary because the instruction cache does *not* - * snoop from the data cache. - * - * void __flush_dcache_icache(void *page) - */ -_GLOBAL(__flush_dcache_icache) -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - -/* Flush the dcache */ - ld r7,PPC64_CACHES@toc(r2) - clrrdi r3,r3,PAGE_SHIFT /* Page align */ - lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */ - lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */ - mr r6,r3 - mtctr r4 -0: dcbst 0,r6 - add r6,r6,r5 - bdnz 0b - sync - -/* Now invalidate the icache */ - - lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */ - lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */ - mtctr r4 -1: icbi 0,r3 - add r3,r3,r5 - bdnz 1b - isync - blr - -/* - * I/O string operations - * - * insb(port, buf, len) - * outsb(port, buf, len) - * insw(port, buf, len) - * outsw(port, buf, len) - * insl(port, buf, len) - * outsl(port, buf, len) - * insw_ns(port, buf, len) - * outsw_ns(port, buf, len) - * insl_ns(port, buf, len) - * outsl_ns(port, buf, len) - * - * The *_ns versions don't do byte-swapping. - */ -_GLOBAL(_insb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbz r5,0(r3) - eieio - stbu r5,1(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbzu r5,1(r4) - stb r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sthbrx r5,0,r3 - bdnz 00b - sync - blr - -_GLOBAL(_insl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stwbrx r5,0,r3 - bdnz 00b - sync - blr - -/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_insw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhz r5,0(r3) - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_outsw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sth r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwz r5,0(r3) - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stw r5,0(r3) - bdnz 00b - sync - blr - -/* - * identify_cpu and calls setup_cpu - * In: r3 = base of the cpu_specs array - * r4 = address of cur_cpu_spec - * r5 = relocation offset - */ -_GLOBAL(identify_cpu) - mfpvr r7 -1: - lwz r8,CPU_SPEC_PVR_MASK(r3) - and r8,r8,r7 - lwz r9,CPU_SPEC_PVR_VALUE(r3) - cmplw 0,r9,r8 - beq 1f - addi r3,r3,CPU_SPEC_ENTRY_SIZE - b 1b -1: - add r0,r3,r5 - std r0,0(r4) - ld r4,CPU_SPEC_SETUP(r3) - sub r4,r4,r5 - ld r4,0(r4) - sub r4,r4,r5 - mtctr r4 - /* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */ - mr r4,r3 - mr r3,r5 - bctr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - LOADADDR(r6,cur_cpu_spec) - sub r6,r6,r3 - ld r4,0(r6) - sub r4,r4,r3 - ld r4,CPU_SPEC_FEATURES(r4) - /* Get the fixup table */ - LOADADDR(r6,__start___ftr_fixup) - sub r6,r6,r3 - LOADADDR(r7,__stop___ftr_fixup) - sub r7,r7,r3 - /* Do the fixup */ -1: cmpld r6,r7 - bgelr - addi r6,r6,32 - ld r8,-32(r6) /* mask */ - and r8,r8,r4 - ld r9,-24(r6) /* value */ - cmpld r8,r9 - beq 1b - ld r8,-16(r6) /* section begin */ - ld r9,-8(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - sub r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) -/* - * Do an IO access in real mode - */ -_GLOBAL(real_readb) - mfmsr r7 - ori r0,r7,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsrd r0 - sync - isync - mfspr r6,SPRN_HID4 - rldicl r5,r6,32,0 - ori r5,r5,0x100 - rldicl r5,r5,32,0 - sync - mtspr SPRN_HID4,r5 - isync - slbia - isync - lbz r3,0(r3) - sync - mtspr SPRN_HID4,r6 - isync - slbia - isync - mtmsrd r7 - sync - isync - blr - - /* - * Do an IO access in real mode - */ -_GLOBAL(real_writeb) - mfmsr r7 - ori r0,r7,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsrd r0 - sync - isync - mfspr r6,SPRN_HID4 - rldicl r5,r6,32,0 - ori r5,r5,0x100 - rldicl r5,r5,32,0 - sync - mtspr SPRN_HID4,r5 - isync - slbia - isync - stb r3,0(r4) - sync - mtspr SPRN_HID4,r6 - isync - slbia - isync - mtmsrd r7 - sync - isync - blr -#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ - -/* - * Create a kernel thread - * kernel_thread(fn, arg, flags) - */ -_GLOBAL(kernel_thread) - std r29,-24(r1) - std r30,-16(r1) - stdu r1,-STACK_FRAME_OVERHEAD(r1) - mr r29,r3 - mr r30,r4 - ori r3,r5,CLONE_VM /* flags */ - oris r3,r3,(CLONE_UNTRACED>>16) - li r4,0 /* new sp (unused) */ - li r0,__NR_clone - sc - cmpdi 0,r3,0 /* parent or child? */ - bne 1f /* return if parent */ - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - ld r2,8(r29) - ld r29,0(r29) - mtlr r29 /* fn addr in lr */ - mr r3,r30 /* load arg and call fn */ - blrl - li r0,__NR_exit /* exit after child exits */ - li r3,0 - sc -1: addi r1,r1,STACK_FRAME_OVERHEAD - ld r29,-24(r1) - ld r30,-16(r1) - blr - -/* - * disable_kernel_fp() - * Disable the FPU. - */ -_GLOBAL(disable_kernel_fp) - mfmsr r3 - rldicl r0,r3,(63-MSR_FP_LG),1 - rldicl r3,r0,(MSR_FP_LG+1),0 - mtmsrd r3 /* disable use of fpu now */ - isync - blr - -#ifdef CONFIG_ALTIVEC - -#if 0 /* this has no callers for now */ -/* - * disable_kernel_altivec() - * Disable the VMX. - */ -_GLOBAL(disable_kernel_altivec) - mfmsr r3 - rldicl r0,r3,(63-MSR_VEC_LG),1 - rldicl r3,r0,(MSR_VEC_LG+1),0 - mtmsrd r3 /* disable use of VMX now */ - isync - blr -#endif /* 0 */ - -/* - * giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - */ -_GLOBAL(giveup_altivec) - mfmsr r5 - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32VRS(0,r4,r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_altivec@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_ALTIVEC */ - -_GLOBAL(__setup_cpu_power3) - blr - -_GLOBAL(execve) - li r0,__NR_execve - sc - bnslr - neg r3,r3 - blr - -/* kexec_wait(phys_cpu) - * - * wait for the flag to change, indicating this kernel is going away but - * the slave code for the next one is at addresses 0 to 100. - * - * This is used by all slaves. - * - * Physical (hardware) cpu id should be in r3. - */ -_GLOBAL(kexec_wait) - bl 1f -1: mflr r5 - addi r5,r5,kexec_flag-1b - -99: HMT_LOW -#ifdef CONFIG_KEXEC /* use no memory without kexec */ - lwz r4,0(r5) - cmpwi 0,r4,0 - bnea 0x60 -#endif - b 99b - -/* this can be in text because we won't change it until we are - * running in real anyways - */ -kexec_flag: - .long 0 - - -#ifdef CONFIG_KEXEC - -/* kexec_smp_wait(void) - * - * call with interrupts off - * note: this is a terminal routine, it does not save lr - * - * get phys id from paca - * set paca id to -1 to say we got here - * switch to real mode - * join other cpus in kexec_wait(phys_id) - */ -_GLOBAL(kexec_smp_wait) - lhz r3,PACAHWCPUID(r13) - li r4,-1 - sth r4,PACAHWCPUID(r13) /* let others know we left */ - bl real_mode - b .kexec_wait - -/* - * switch to real mode (turn mmu off) - * we use the early kernel trick that the hardware ignores bits - * 0 and 1 (big endian) of the effective address in real mode - * - * don't overwrite r3 here, it is live for kexec_wait above. - */ -real_mode: /* assume normal blr return */ -1: li r9,MSR_RI - li r10,MSR_DR|MSR_IR - mflr r11 /* return address to SRR0 */ - mfmsr r12 - andc r9,r12,r9 - andc r10,r12,r10 - - mtmsrd r9,1 - mtspr SPRN_SRR1,r10 - mtspr SPRN_SRR0,r11 - rfid - - -/* - * kexec_sequence(newstack, start, image, control, clear_all()) - * - * does the grungy work with stack switching and real mode switches - * also does simple calls to other code - */ - -_GLOBAL(kexec_sequence) - mflr r0 - std r0,16(r1) - - /* switch stacks to newstack -- &kexec_stack.stack */ - stdu r1,THREAD_SIZE-112(r3) - mr r1,r3 - - li r0,0 - std r0,16(r1) - - /* save regs for local vars on new stack. - * yes, we won't go back, but ... - */ - std r31,-8(r1) - std r30,-16(r1) - std r29,-24(r1) - std r28,-32(r1) - std r27,-40(r1) - std r26,-48(r1) - std r25,-56(r1) - - stdu r1,-112-64(r1) - - /* save args into preserved regs */ - mr r31,r3 /* newstack (both) */ - mr r30,r4 /* start (real) */ - mr r29,r5 /* image (virt) */ - mr r28,r6 /* control, unused */ - mr r27,r7 /* clear_all() fn desc */ - mr r26,r8 /* spare */ - lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ - - /* disable interrupts, we are overwriting kernel data next */ - mfmsr r3 - rlwinm r3,r3,0,17,15 - mtmsrd r3,1 - - /* copy dest pages, flush whole dest image */ - mr r3,r29 - bl .kexec_copy_flush /* (image) */ - - /* turn off mmu */ - bl real_mode - - /* clear out hardware hash page table and tlb */ - ld r5,0(r27) /* deref function descriptor */ - mtctr r5 - bctrl /* ppc_md.hash_clear_all(void); */ - -/* - * kexec image calling is: - * the first 0x100 bytes of the entry point are copied to 0 - * - * all slaves branch to slave = 0x60 (absolute) - * slave(phys_cpu_id); - * - * master goes to start = entry point - * start(phys_cpu_id, start, 0); - * - * - * a wrapper is needed to call existing kernels, here is an approximate - * description of one method: - * - * v2: (2.6.10) - * start will be near the boot_block (maybe 0x100 bytes before it?) - * it will have a 0x60, which will b to boot_block, where it will wait - * and 0 will store phys into struct boot-block and load r3 from there, - * copy kernel 0-0x100 and tell slaves to back down to 0x60 again - * - * v1: (2.6.9) - * boot block will have all cpus scanning device tree to see if they - * are the boot cpu ????? - * other device tree differences (prop sizes, va vs pa, etc)... - */ - - /* copy 0x100 bytes starting at start to 0 */ - li r3,0 - mr r4,r30 - li r5,0x100 - li r6,0 - bl .copy_and_flush /* (dest, src, copy limit, start offset) */ -1: /* assume normal blr return */ - - /* release other cpus to the new kernel secondary start at 0x60 */ - mflr r5 - li r6,1 - stw r6,kexec_flag-1b(5) - mr r3,r25 # my phys cpu - mr r4,r30 # start, aka phys mem offset - mtlr 4 - li r5,0 - blr /* image->start(physid, image->start, 0); */ -#endif /* CONFIG_KEXEC */ diff --git a/arch/ppc64/kernel/nvram.c b/arch/ppc64/kernel/nvram.c index 4fb1a9f5060d..c0fcd29918ce 100644 --- a/arch/ppc64/kernel/nvram.c +++ b/arch/ppc64/kernel/nvram.c @@ -31,7 +31,6 @@ #include <asm/rtas.h> #include <asm/prom.h> #include <asm/machdep.h> -#include <asm/systemcfg.h> #undef DEBUG_NVRAM @@ -167,7 +166,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, case IOC_NVRAM_GET_OFFSET: { int part, offset; - if (systemcfg->platform != PLATFORM_POWERMAC) + if (_machine != PLATFORM_POWERMAC) return -EINVAL; if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0) return -EFAULT; @@ -450,7 +449,7 @@ static int nvram_setup_partition(void) * in our nvram, as Apple defined partitions use pretty much * all of the space */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENOSPC; /* see if we have an OS partition that meets our needs. diff --git a/arch/ppc64/kernel/ppc_ksyms.c b/arch/ppc64/kernel/ppc_ksyms.c deleted file mode 100644 index 84006e26342c..000000000000 --- a/arch/ppc64/kernel/ppc_ksyms.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/console.h> -#include <net/checksum.h> - -#include <asm/processor.h> -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/hw_irq.h> -#include <asm/abs_addr.h> -#include <asm/cacheflush.h> - -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strpbrk); -EXPORT_SYMBOL(strstr); -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strncmp); - -EXPORT_SYMBOL(csum_partial); -EXPORT_SYMBOL(csum_partial_copy_generic); -EXPORT_SYMBOL(ip_fast_csum); -EXPORT_SYMBOL(csum_tcpudp_magic); - -EXPORT_SYMBOL(__copy_tofrom_user); -EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); - -EXPORT_SYMBOL(reloc_offset); - -EXPORT_SYMBOL(_insb); -EXPORT_SYMBOL(_outsb); -EXPORT_SYMBOL(_insw); -EXPORT_SYMBOL(_outsw); -EXPORT_SYMBOL(_insl); -EXPORT_SYMBOL(_outsl); -EXPORT_SYMBOL(_insw_ns); -EXPORT_SYMBOL(_outsw_ns); -EXPORT_SYMBOL(_insl_ns); -EXPORT_SYMBOL(_outsl_ns); - -EXPORT_SYMBOL(kernel_thread); - -EXPORT_SYMBOL(giveup_fpu); -#ifdef CONFIG_ALTIVEC -EXPORT_SYMBOL(giveup_altivec); -#endif -EXPORT_SYMBOL(__flush_icache_range); -EXPORT_SYMBOL(flush_dcache_range); - -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memscan); -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memchr); - -EXPORT_SYMBOL(timer_interrupt); -EXPORT_SYMBOL(console_drivers); diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c deleted file mode 100644 index dece31e58bc4..000000000000 --- a/arch/ppc64/kernel/prom.c +++ /dev/null @@ -1,1942 +0,0 @@ -/* - * - * - * Procedures for interfacing to Open Firmware. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. - * {engebret|bergner}@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include <stdarg.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/stringify.h> -#include <linux/delay.h> -#include <linux/initrd.h> -#include <linux/bitops.h> -#include <linux/module.h> - -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/lmb.h> -#include <asm/abs_addr.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/pci.h> -#include <asm/iommu.h> -#include <asm/ppcdebug.h> -#include <asm/btext.h> -#include <asm/sections.h> -#include <asm/machdep.h> -#include <asm/pSeries_reconfig.h> - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; -}; - -struct isa_reg_property { - u32 space; - u32 address; - u32 size; -}; - - -typedef int interpret_func(struct device_node *, unsigned long *, - int, int, int); - -extern struct rtas_t rtas; -extern struct lmb lmb; -extern unsigned long klimit; -extern unsigned long memory_limit; - -static int __initdata dt_root_addr_cells; -static int __initdata dt_root_size_cells; -static int __initdata iommu_is_off; -int __initdata iommu_force_on; -unsigned long tce_alloc_start, tce_alloc_end; - -typedef u32 cell_t; - -#if 0 -static struct boot_param_header *initial_boot_params __initdata; -#else -struct boot_param_header *initial_boot_params; -#endif - -static struct device_node *allnodes = NULL; - -/* use when traversing tree through the allnext, child, sibling, - * or parent members of struct device_node. - */ -static DEFINE_RWLOCK(devtree_lock); - -/* export that to outside world */ -struct device_node *of_chosen; - -/* - * Wrapper for allocating memory for various data that needs to be - * attached to device nodes as they are processed at boot or when - * added to the device tree later (e.g. DLPAR). At boot there is - * already a region reserved so we just increment *mem_start by size; - * otherwise we call kmalloc. - */ -static void * prom_alloc(unsigned long size, unsigned long *mem_start) -{ - unsigned long tmp; - - if (!mem_start) - return kmalloc(size, GFP_KERNEL); - - tmp = *mem_start; - *mem_start += size; - return (void *)tmp; -} - -/* - * Find the device_node with a given phandle. - */ -static struct device_node * find_phandle(phandle ph) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->linux_phandle == ph) - return np; - return NULL; -} - -/* - * Find the interrupt parent of a node. - */ -static struct device_node * __devinit intr_parent(struct device_node *p) -{ - phandle *parp; - - parp = (phandle *) get_property(p, "interrupt-parent", NULL); - if (parp == NULL) - return p->parent; - return find_phandle(*parp); -} - -/* - * Find out the size of each entry of the interrupts property - * for a node. - */ -int __devinit prom_n_intr_cells(struct device_node *np) -{ - struct device_node *p; - unsigned int *icp; - - for (p = np; (p = intr_parent(p)) != NULL; ) { - icp = (unsigned int *) - get_property(p, "#interrupt-cells", NULL); - if (icp != NULL) - return *icp; - if (get_property(p, "interrupt-controller", NULL) != NULL - || get_property(p, "interrupt-map", NULL) != NULL) { - printk("oops, node %s doesn't have #interrupt-cells\n", - p->full_name); - return 1; - } - } -#ifdef DEBUG_IRQ - printk("prom_n_intr_cells failed for %s\n", np->full_name); -#endif - return 1; -} - -/* - * Map an interrupt from a device up to the platform interrupt - * descriptor. - */ -static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictrler, - struct device_node *np, unsigned int *ints, - int nintrc) -{ - struct device_node *p, *ipar; - unsigned int *imap, *imask, *ip; - int i, imaplen, match; - int newintrc = 0, newaddrc = 0; - unsigned int *reg; - int naddrc; - - reg = (unsigned int *) get_property(np, "reg", NULL); - naddrc = prom_n_addr_cells(np); - p = intr_parent(np); - while (p != NULL) { - if (get_property(p, "interrupt-controller", NULL) != NULL) - /* this node is an interrupt controller, stop here */ - break; - imap = (unsigned int *) - get_property(p, "interrupt-map", &imaplen); - if (imap == NULL) { - p = intr_parent(p); - continue; - } - imask = (unsigned int *) - get_property(p, "interrupt-map-mask", NULL); - if (imask == NULL) { - printk("oops, %s has interrupt-map but no mask\n", - p->full_name); - return 0; - } - imaplen /= sizeof(unsigned int); - match = 0; - ipar = NULL; - while (imaplen > 0 && !match) { - /* check the child-interrupt field */ - match = 1; - for (i = 0; i < naddrc && match; ++i) - match = ((reg[i] ^ imap[i]) & imask[i]) == 0; - for (; i < naddrc + nintrc && match; ++i) - match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0; - imap += naddrc + nintrc; - imaplen -= naddrc + nintrc; - /* grab the interrupt parent */ - ipar = find_phandle((phandle) *imap++); - --imaplen; - if (ipar == NULL) { - printk("oops, no int parent %x in map of %s\n", - imap[-1], p->full_name); - return 0; - } - /* find the parent's # addr and intr cells */ - ip = (unsigned int *) - get_property(ipar, "#interrupt-cells", NULL); - if (ip == NULL) { - printk("oops, no #interrupt-cells on %s\n", - ipar->full_name); - return 0; - } - newintrc = *ip; - ip = (unsigned int *) - get_property(ipar, "#address-cells", NULL); - newaddrc = (ip == NULL)? 0: *ip; - imap += newaddrc + newintrc; - imaplen -= newaddrc + newintrc; - } - if (imaplen < 0) { - printk("oops, error decoding int-map on %s, len=%d\n", - p->full_name, imaplen); - return 0; - } - if (!match) { -#ifdef DEBUG_IRQ - printk("oops, no match in %s int-map for %s\n", - p->full_name, np->full_name); -#endif - return 0; - } - p = ipar; - naddrc = newaddrc; - nintrc = newintrc; - ints = imap - nintrc; - reg = ints - naddrc; - } - if (p == NULL) { -#ifdef DEBUG_IRQ - printk("hmmm, int tree for %s doesn't have ctrler\n", - np->full_name); -#endif - return 0; - } - *irq = ints; - *ictrler = p; - return nintrc; -} - -static int __devinit finish_node_interrupts(struct device_node *np, - unsigned long *mem_start, - int measure_only) -{ - unsigned int *ints; - int intlen, intrcells, intrcount; - int i, j, n; - unsigned int *irq, virq; - struct device_node *ic; - - ints = (unsigned int *) get_property(np, "interrupts", &intlen); - if (ints == NULL) - return 0; - intrcells = prom_n_intr_cells(np); - intlen /= intrcells * sizeof(unsigned int); - - np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start); - if (!np->intrs) - return -ENOMEM; - - if (measure_only) - return 0; - - intrcount = 0; - for (i = 0; i < intlen; ++i, ints += intrcells) { - n = map_interrupt(&irq, &ic, np, ints, intrcells); - if (n <= 0) - continue; - - /* don't map IRQ numbers under a cascaded 8259 controller */ - if (ic && device_is_compatible(ic, "chrp,iic")) { - np->intrs[intrcount].line = irq[0]; - } else { - virq = virt_irq_create_mapping(irq[0]); - if (virq == NO_IRQ) { - printk(KERN_CRIT "Could not allocate interrupt" - " number for %s\n", np->full_name); - continue; - } - np->intrs[intrcount].line = irq_offset_up(virq); - } - - /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { - char *name = get_property(ic->parent, "name", NULL); - if (name && !strcmp(name, "u3")) - np->intrs[intrcount].line += 128; - else if (!(name && !strcmp(name, "mac-io"))) - /* ignore other cascaded controllers, such as - the k2-sata-root */ - break; - } - np->intrs[intrcount].sense = 1; - if (n > 1) - np->intrs[intrcount].sense = irq[1]; - if (n > 2) { - printk("hmmm, got %d intr cells for %s:", n, - np->full_name); - for (j = 0; j < n; ++j) - printk(" %d", irq[j]); - printk("\n"); - } - ++intrcount; - } - np->n_intrs = intrcount; - - return 0; -} - -static int __devinit interpret_pci_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct address_range *adr; - struct pci_reg_property *pci_addrs; - int i, l, n_addrs; - - pci_addrs = (struct pci_reg_property *) - get_property(np, "assigned-addresses", &l); - if (!pci_addrs) - return 0; - - n_addrs = l / sizeof(*pci_addrs); - - adr = prom_alloc(n_addrs * sizeof(*adr), mem_start); - if (!adr) - return -ENOMEM; - - if (measure_only) - return 0; - - np->addrs = adr; - np->n_addrs = n_addrs; - - for (i = 0; i < n_addrs; i++) { - adr[i].space = pci_addrs[i].addr.a_hi; - adr[i].address = pci_addrs[i].addr.a_lo | - ((u64)pci_addrs[i].addr.a_mid << 32); - adr[i].size = pci_addrs[i].size_lo; - } - - return 0; -} - -static int __init interpret_dbdma_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct reg_property32 *rp; - struct address_range *adr; - unsigned long base_address; - int i, l; - struct device_node *db; - - base_address = 0; - if (!measure_only) { - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - } - - rp = (struct reg_property32 *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property32)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct reg_property32)) >= 0) { - if (!measure_only) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_macio_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct reg_property32 *rp; - struct address_range *adr; - unsigned long base_address; - int i, l; - struct device_node *db; - - base_address = 0; - if (!measure_only) { - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - } - - rp = (struct reg_property32 *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property32)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct reg_property32)) >= 0) { - if (!measure_only) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_isa_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct isa_reg_property *rp; - struct address_range *adr; - int i, l; - - rp = (struct isa_reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct isa_reg_property)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct isa_reg_property)) >= 0) { - if (!measure_only) { - adr[i].space = rp[i].space; - adr[i].address = rp[i].address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_root_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct address_range *adr; - int i, l; - unsigned int *rp; - int rpsize = (naddrc + nsizec) * sizeof(unsigned int); - - rp = (unsigned int *) get_property(np, "reg", &l); - if (rp != 0 && l >= rpsize) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= rpsize) >= 0) { - if (!measure_only) { - adr[i].space = 0; - adr[i].address = rp[naddrc - 1]; - adr[i].size = rp[naddrc + nsizec - 1]; - } - ++i; - rp += naddrc + nsizec; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __devinit finish_node(struct device_node *np, - unsigned long *mem_start, - interpret_func *ifunc, - int naddrc, int nsizec, - int measure_only) -{ - struct device_node *child; - int *ip, rc = 0; - - /* get the device addresses and interrupts */ - if (ifunc != NULL) - rc = ifunc(np, mem_start, naddrc, nsizec, measure_only); - if (rc) - goto out; - - rc = finish_node_interrupts(np, mem_start, measure_only); - if (rc) - goto out; - - /* Look for #address-cells and #size-cells properties. */ - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - naddrc = *ip; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - nsizec = *ip; - - if (!strcmp(np->name, "device-tree") || np->parent == NULL) - ifunc = interpret_root_props; - else if (np->type == 0) - ifunc = NULL; - else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci")) - ifunc = interpret_pci_props; - else if (!strcmp(np->type, "dbdma")) - ifunc = interpret_dbdma_props; - else if (!strcmp(np->type, "mac-io") || ifunc == interpret_macio_props) - ifunc = interpret_macio_props; - else if (!strcmp(np->type, "isa")) - ifunc = interpret_isa_props; - else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3")) - ifunc = interpret_root_props; - else if (!((ifunc == interpret_dbdma_props - || ifunc == interpret_macio_props) - && (!strcmp(np->type, "escc") - || !strcmp(np->type, "media-bay")))) - ifunc = NULL; - - for (child = np->child; child != NULL; child = child->sibling) { - rc = finish_node(child, mem_start, ifunc, - naddrc, nsizec, measure_only); - if (rc) - goto out; - } -out: - return rc; -} - -/** - * finish_device_tree is called once things are running normally - * (i.e. with text and data mapped to the address they were linked at). - * It traverses the device tree and fills in some of the additional, - * fields in each node like {n_}addrs and {n_}intrs, the virt interrupt - * mapping is also initialized at this point. - */ -void __init finish_device_tree(void) -{ - unsigned long start, end, size = 0; - - DBG(" -> finish_device_tree\n"); - - if (ppc64_interrupt_controller == IC_INVALID) { - DBG("failed to configure interrupt controller type\n"); - panic("failed to configure interrupt controller type\n"); - } - - /* Initialize virtual IRQ map */ - virt_irq_init(); - - /* - * Finish device-tree (pre-parsing some properties etc...) - * We do this in 2 passes. One with "measure_only" set, which - * will only measure the amount of memory needed, then we can - * allocate that memory, and call finish_node again. However, - * we must be careful as most routines will fail nowadays when - * prom_alloc() returns 0, so we must make sure our first pass - * doesn't start at 0. We pre-initialize size to 16 for that - * reason and then remove those additional 16 bytes - */ - size = 16; - finish_node(allnodes, &size, NULL, 0, 0, 1); - size -= 16; - end = start = (unsigned long)abs_to_virt(lmb_alloc(size, 128)); - finish_node(allnodes, &end, NULL, 0, 0, 0); - BUG_ON(end != start + size); - - DBG(" <- finish_device_tree\n"); -} - -#ifdef DEBUG -#define printk udbg_printf -#endif - -static inline char *find_flat_dt_string(u32 offset) -{ - return ((char *)initial_boot_params) + - initial_boot_params->off_dt_strings + offset; -} - -/** - * This function is used to scan the flattened device-tree, it is - * used to extract the memory informations at boot before we can - * unflatten the tree - */ -int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - int rc = 0; - int depth = -1; - - do { - u32 tag = *((u32 *)p); - char *pathp; - - p += 4; - if (tag == OF_DT_END_NODE) { - depth --; - continue; - } - if (tag == OF_DT_NOP) - continue; - if (tag == OF_DT_END) - break; - if (tag == OF_DT_PROP) { - u32 sz = *((u32 *)p); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - p += sz; - p = _ALIGN(p, 4); - continue; - } - if (tag != OF_DT_BEGIN_NODE) { - printk(KERN_WARNING "Invalid tag %x scanning flattened" - " device tree !\n", tag); - return -EINVAL; - } - depth++; - pathp = (char *)p; - p = _ALIGN(p + strlen(pathp) + 1, 4); - if ((*pathp) == '/') { - char *lp, *np; - for (lp = NULL, np = pathp; *np; np++) - if ((*np) == '/') - lp = np+1; - if (lp != NULL) - pathp = lp; - } - rc = it(p, pathp, depth, data); - if (rc != 0) - break; - } while(1); - - return rc; -} - -/** - * This function can be used within scan_flattened_dt callback to get - * access to properties - */ -void* __init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size) -{ - unsigned long p = node; - - do { - u32 tag = *((u32 *)p); - u32 sz, noff; - const char *nstr; - - p += 4; - if (tag == OF_DT_NOP) - continue; - if (tag != OF_DT_PROP) - return NULL; - - sz = *((u32 *)p); - noff = *((u32 *)(p + 4)); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - - nstr = find_flat_dt_string(noff); - if (nstr == NULL) { - printk(KERN_WARNING "Can't find property index" - " name !\n"); - return NULL; - } - if (strcmp(name, nstr) == 0) { - if (size) - *size = sz; - return (void *)p; - } - p += sz; - p = _ALIGN(p, 4); - } while(1); -} - -static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, - unsigned long align) -{ - void *res; - - *mem = _ALIGN(*mem, align); - res = (void *)*mem; - *mem += size; - - return res; -} - -static unsigned long __init unflatten_dt_node(unsigned long mem, - unsigned long *p, - struct device_node *dad, - struct device_node ***allnextpp, - unsigned long fpsize) -{ - struct device_node *np; - struct property *pp, **prev_pp = NULL; - char *pathp; - u32 tag; - unsigned int l, allocl; - int has_name = 0; - int new_format = 0; - - tag = *((u32 *)(*p)); - if (tag != OF_DT_BEGIN_NODE) { - printk("Weird tag at start of node: %x\n", tag); - return mem; - } - *p += 4; - pathp = (char *)*p; - l = allocl = strlen(pathp) + 1; - *p = _ALIGN(*p + l, 4); - - /* version 0x10 has a more compact unit name here instead of the full - * path. we accumulate the full path size using "fpsize", we'll rebuild - * it later. We detect this because the first character of the name is - * not '/'. - */ - if ((*pathp) != '/') { - new_format = 1; - if (fpsize == 0) { - /* root node: special case. fpsize accounts for path - * plus terminating zero. root node only has '/', so - * fpsize should be 2, but we want to avoid the first - * level nodes to have two '/' so we use fpsize 1 here - */ - fpsize = 1; - allocl = 2; - } else { - /* account for '/' and path size minus terminal 0 - * already in 'l' - */ - fpsize += l; - allocl = fpsize; - } - } - - - np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, - __alignof__(struct device_node)); - if (allnextpp) { - memset(np, 0, sizeof(*np)); - np->full_name = ((char*)np) + sizeof(struct device_node); - if (new_format) { - char *p = np->full_name; - /* rebuild full path for new format */ - if (dad && dad->parent) { - strcpy(p, dad->full_name); -#ifdef DEBUG - if ((strlen(p) + l + 1) != allocl) { - DBG("%s: p: %d, l: %d, a: %d\n", - pathp, strlen(p), l, allocl); - } -#endif - p += strlen(p); - } - *(p++) = '/'; - memcpy(p, pathp, l); - } else - memcpy(np->full_name, pathp, l); - prev_pp = &np->properties; - **allnextpp = np; - *allnextpp = &np->allnext; - if (dad != NULL) { - np->parent = dad; - /* we temporarily use the next field as `last_child'*/ - if (dad->next == 0) - dad->child = np; - else - dad->next->sibling = np; - dad->next = np; - } - kref_init(&np->kref); - } - while(1) { - u32 sz, noff; - char *pname; - - tag = *((u32 *)(*p)); - if (tag == OF_DT_NOP) { - *p += 4; - continue; - } - if (tag != OF_DT_PROP) - break; - *p += 4; - sz = *((u32 *)(*p)); - noff = *((u32 *)((*p) + 4)); - *p += 8; - if (initial_boot_params->version < 0x10) - *p = _ALIGN(*p, sz >= 8 ? 8 : 4); - - pname = find_flat_dt_string(noff); - if (pname == NULL) { - printk("Can't find property name in list !\n"); - break; - } - if (strcmp(pname, "name") == 0) - has_name = 1; - l = strlen(pname) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property), - __alignof__(struct property)); - if (allnextpp) { - if (strcmp(pname, "linux,phandle") == 0) { - np->node = *((u32 *)*p); - if (np->linux_phandle == 0) - np->linux_phandle = np->node; - } - if (strcmp(pname, "ibm,phandle") == 0) - np->linux_phandle = *((u32 *)*p); - pp->name = pname; - pp->length = sz; - pp->value = (void *)*p; - *prev_pp = pp; - prev_pp = &pp->next; - } - *p = _ALIGN((*p) + sz, 4); - } - /* with version 0x10 we may not have the name property, recreate - * it here from the unit name if absent - */ - if (!has_name) { - char *p = pathp, *ps = pathp, *pa = NULL; - int sz; - - while (*p) { - if ((*p) == '@') - pa = p; - if ((*p) == '/') - ps = p + 1; - p++; - } - if (pa < ps) - pa = p; - sz = (pa - ps) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, - __alignof__(struct property)); - if (allnextpp) { - pp->name = "name"; - pp->length = sz; - pp->value = (unsigned char *)(pp + 1); - *prev_pp = pp; - prev_pp = &pp->next; - memcpy(pp->value, ps, sz - 1); - ((char *)pp->value)[sz - 1] = 0; - DBG("fixed up name for %s -> %s\n", pathp, pp->value); - } - } - if (allnextpp) { - *prev_pp = NULL; - np->name = get_property(np, "name", NULL); - np->type = get_property(np, "device_type", NULL); - - if (!np->name) - np->name = "<NULL>"; - if (!np->type) - np->type = "<NULL>"; - } - while (tag == OF_DT_BEGIN_NODE) { - mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); - tag = *((u32 *)(*p)); - } - if (tag != OF_DT_END_NODE) { - printk("Weird tag at end of node: %x\n", tag); - return mem; - } - *p += 4; - return mem; -} - - -/** - * unflattens the device-tree passed by the firmware, creating the - * tree of struct device_node. It also fills the "name" and "type" - * pointers of the nodes so the normal device-tree walking functions - * can be used (this used to be done by finish_device_tree) - */ -void __init unflatten_device_tree(void) -{ - unsigned long start, mem, size; - struct device_node **allnextp = &allnodes; - char *p = NULL; - int l = 0; - - DBG(" -> unflatten_device_tree()\n"); - - /* First pass, scan for size */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - size = unflatten_dt_node(0, &start, NULL, NULL, 0); - size = (size | 3) + 1; - - DBG(" size is %lx, allocating...\n", size); - - /* Allocate memory for the expanded device tree */ - mem = lmb_alloc(size + 4, __alignof__(struct device_node)); - if (!mem) { - DBG("Couldn't allocate memory with lmb_alloc()!\n"); - panic("Couldn't allocate memory with lmb_alloc()!\n"); - } - mem = (unsigned long)abs_to_virt(mem); - - ((u32 *)mem)[size / 4] = 0xdeadbeef; - - DBG(" unflattening...\n", mem); - - /* Second pass, do actual unflattening */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - unflatten_dt_node(mem, &start, NULL, &allnextp, 0); - if (*((u32 *)start) != OF_DT_END) - printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start)); - if (((u32 *)mem)[size / 4] != 0xdeadbeef) - printk(KERN_WARNING "End of tree marker overwritten: %08x\n", - ((u32 *)mem)[size / 4] ); - *allnextp = NULL; - - /* Get pointer to OF "/chosen" node for use everywhere */ - of_chosen = of_find_node_by_path("/chosen"); - - /* Retreive command line */ - if (of_chosen != NULL) { - p = (char *)get_property(of_chosen, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE)); - } -#ifdef CONFIG_CMDLINE - if (l == 0 || (l == 1 && (*p) == 0)) - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); -#endif /* CONFIG_CMDLINE */ - - DBG("Command line is: %s\n", cmd_line); - - DBG(" <- unflatten_device_tree()\n"); -} - - -static int __init early_init_dt_scan_cpus(unsigned long node, - const char *uname, int depth, void *data) -{ - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - u32 *prop; - unsigned long size; - - /* We are scanning "cpu" nodes only */ - if (type == NULL || strcmp(type, "cpu") != 0) - return 0; - - if (initial_boot_params && initial_boot_params->version >= 2) { - /* version 2 of the kexec param format adds the phys cpuid - * of booted proc. - */ - boot_cpuid_phys = initial_boot_params->boot_cpuid_phys; - boot_cpuid = 0; - } else { - /* Check if it's the boot-cpu, set it's hw index in paca now */ - if (of_get_flat_dt_prop(node, "linux,boot-cpu", NULL) - != NULL) { - u32 *prop = of_get_flat_dt_prop(node, "reg", NULL); - set_hard_smp_processor_id(0, prop == NULL ? 0 : *prop); - boot_cpuid_phys = get_hard_smp_processor_id(0); - } - } - -#ifdef CONFIG_ALTIVEC - /* Check if we have a VMX and eventually update CPU features */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL); - if (prop && (*prop) > 0) { - cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; - cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; - } - - /* Same goes for Apple's "altivec" property */ - prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL); - if (prop) { - cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; - cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; - } -#endif /* CONFIG_ALTIVEC */ - - /* - * Check for an SMT capable CPU and set the CPU feature. We do - * this by looking at the size of the ibm,ppc-interrupt-server#s - * property - */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", - &size); - cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; - if (prop && ((size / sizeof(u32)) > 1)) - cur_cpu_spec->cpu_features |= CPU_FTR_SMT; - - return 0; -} - -static int __init early_init_dt_scan_chosen(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - u64 *prop64; - - DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - - if (depth != 1 || strcmp(uname, "chosen") != 0) - return 0; - - /* get platform type */ - prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); - if (prop == NULL) - return 0; - systemcfg->platform = *prop; - - /* check if iommu is forced on or off */ - if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) - iommu_is_off = 1; - if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) - iommu_force_on = 1; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,memory-limit", NULL); - if (prop64) - memory_limit = *prop64; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,tce-alloc-start",NULL); - if (prop64) - tce_alloc_start = *prop64; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); - if (prop64) - tce_alloc_end = *prop64; - -#ifdef CONFIG_PPC_RTAS - /* To help early debugging via the front panel, we retreive a minimal - * set of RTAS infos now if available - */ - { - u64 *basep, *entryp; - - basep = (u64*)of_get_flat_dt_prop(node, - "linux,rtas-base", NULL); - entryp = (u64*)of_get_flat_dt_prop(node, - "linux,rtas-entry", NULL); - prop = (u32*)of_get_flat_dt_prop(node, - "linux,rtas-size", NULL); - if (basep && entryp && prop) { - rtas.base = *basep; - rtas.entry = *entryp; - rtas.size = *prop; - } - } -#endif /* CONFIG_PPC_RTAS */ - - /* break now */ - return 1; -} - -static int __init early_init_dt_scan_root(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - - if (depth != 0) - return 0; - - prop = (u32 *)of_get_flat_dt_prop(node, "#size-cells", NULL); - dt_root_size_cells = (prop == NULL) ? 1 : *prop; - DBG("dt_root_size_cells = %x\n", dt_root_size_cells); - - prop = (u32 *)of_get_flat_dt_prop(node, "#address-cells", NULL); - dt_root_addr_cells = (prop == NULL) ? 2 : *prop; - DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells); - - /* break now */ - return 1; -} - -static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) -{ - cell_t *p = *cellp; - unsigned long r = 0; - - /* Ignore more than 2 cells */ - while (s > 2) { - p++; - s--; - } - while (s) { - r <<= 32; - r |= *(p++); - s--; - } - - *cellp = p; - return r; -} - - -static int __init early_init_dt_scan_memory(unsigned long node, - const char *uname, int depth, void *data) -{ - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - cell_t *reg, *endp; - unsigned long l; - - /* We are scanning "memory" nodes only */ - if (type == NULL || strcmp(type, "memory") != 0) - return 0; - - reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); - if (reg == NULL) - return 0; - - endp = reg + (l / sizeof(cell_t)); - - DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n", - uname, l, reg[0], reg[1], reg[2], reg[3]); - - while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - unsigned long base, size; - - base = dt_mem_next_cell(dt_root_addr_cells, ®); - size = dt_mem_next_cell(dt_root_size_cells, ®); - - if (size == 0) - continue; - DBG(" - %lx , %lx\n", base, size); - if (iommu_is_off) { - if (base >= 0x80000000ul) - continue; - if ((base + size) > 0x80000000ul) - size = 0x80000000ul - base; - } - lmb_add(base, size); - } - return 0; -} - -static void __init early_reserve_mem(void) -{ - u64 base, size; - u64 *reserve_map = (u64 *)(((unsigned long)initial_boot_params) + - initial_boot_params->off_mem_rsvmap); - while (1) { - base = *(reserve_map++); - size = *(reserve_map++); - if (size == 0) - break; - DBG("reserving: %lx -> %lx\n", base, size); - lmb_reserve(base, size); - } - -#if 0 - DBG("memory reserved, lmbs :\n"); - lmb_dump_all(); -#endif -} - -void __init early_init_devtree(void *params) -{ - DBG(" -> early_init_devtree()\n"); - - /* Setup flat device-tree pointer */ - initial_boot_params = params; - - /* Retreive various informations from the /chosen node of the - * device-tree, including the platform type, initrd location and - * size, TCE reserve, and more ... - */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); - - /* Scan memory nodes and rebuild LMBs */ - lmb_init(); - of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory, NULL); - lmb_enforce_memory_limit(memory_limit); - lmb_analyze(); - systemcfg->physicalMemorySize = lmb_phys_mem_size(); - lmb_reserve(0, __pa(klimit)); - - DBG("Phys. mem: %lx\n", systemcfg->physicalMemorySize); - - /* Reserve LMB regions used by kernel, initrd, dt, etc... */ - early_reserve_mem(); - - DBG("Scanning CPUs ...\n"); - - /* Retreive hash table size from flattened tree plus other - * CPU related informations (altivec support, boot CPU ID, ...) - */ - of_scan_flat_dt(early_init_dt_scan_cpus, NULL); - - DBG(" <- early_init_devtree()\n"); -} - -#undef printk - -int -prom_n_addr_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #address-cells property for the root node, default to 1 */ - return 1; -} - -int -prom_n_size_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #size-cells property for the root node, default to 1 */ - return 1; -} - -/** - * Work out the sense (active-low level / active-high edge) - * of each interrupt from the device tree. - */ -void __init prom_get_irq_senses(unsigned char *senses, int off, int max) -{ - struct device_node *np; - int i, j; - - /* default to level-triggered */ - memset(senses, 1, max - off); - - for (np = allnodes; np != 0; np = np->allnext) { - for (j = 0; j < np->n_intrs; j++) { - i = np->intrs[j].line; - if (i >= off && i < max) - senses[i-off] = np->intrs[j].sense ? - IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE : - IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE; - } - } -} - -/** - * Construct and return a list of the device_nodes with a given name. - */ -struct device_node * -find_devices(const char *name) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->name != 0 && strcasecmp(np->name, name) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_devices); - -/** - * Construct and return a list of the device_nodes with a given type. - */ -struct device_node * -find_type_devices(const char *type) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->type != 0 && strcasecmp(np->type, type) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_type_devices); - -/** - * Returns all nodes linked together - */ -struct device_node * -find_all_nodes(void) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - *prevp = np; - prevp = &np->next; - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_all_nodes); - -/** Checks if the given "compat" string matches one of the strings in - * the device's "compatible" property - */ -int -device_is_compatible(struct device_node *device, const char *compat) -{ - const char* cp; - int cplen, l; - - cp = (char *) get_property(device, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} -EXPORT_SYMBOL(device_is_compatible); - - -/** - * Indicates whether the root node has a given value in its - * compatible property. - */ -int -machine_is_compatible(const char *compat) -{ - struct device_node *root; - int rc = 0; - - root = of_find_node_by_path("/"); - if (root) { - rc = device_is_compatible(root, compat); - of_node_put(root); - } - return rc; -} -EXPORT_SYMBOL(machine_is_compatible); - -/** - * Construct and return a list of the device_nodes with a given type - * and compatible property. - */ -struct device_node * -find_compatible_devices(const char *type, const char *compat) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compat)) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_compatible_devices); - -/** - * Find the device_node with a given full_name. - */ -struct device_node * -find_path_device(const char *path) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - return np; - return NULL; -} -EXPORT_SYMBOL(find_path_device); - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. The device tree and list - * are protected by a rw_lock. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet. - * - *******/ - -/** - * of_find_node_by_name - Find a node by its "name" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The name string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_name(struct device_node *from, - const char *name) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (np->name != 0 && strcasecmp(np->name, name) == 0 - && of_node_get(np)) - break; - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_name); - -/** - * of_find_node_by_type - Find a node by its "device_type" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The type string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_type(struct device_node *from, - const char *type) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (np->type != 0 && strcasecmp(np->type, type) == 0 - && of_node_get(np)) - break; - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_type); - -/** - * of_find_compatible_node - Find a node based on type and one of the - * tokens in its "compatible" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @type: The type string to match "device_type" or NULL to ignore - * @compatible: The string to match to one of the tokens in the device - * "compatible" list. - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compatible) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compatible) && of_node_get(np)) - break; - } - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_compatible_node); - -/** - * of_find_node_by_path - Find a node matching a full OF path - * @path: The full path to match - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_path(const char *path) -{ - struct device_node *np = allnodes; - - read_lock(&devtree_lock); - for (; np != 0; np = np->allnext) { - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0 - && of_node_get(np)) - break; - } - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_path); - -/** - * of_find_node_by_phandle - Find a node given a phandle - * @handle: phandle of the node to find - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_phandle(phandle handle) -{ - struct device_node *np; - - read_lock(&devtree_lock); - for (np = allnodes; np != 0; np = np->allnext) - if (np->linux_phandle == handle) - break; - if (np) - of_node_get(np); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_phandle); - -/** - * of_find_all_nodes - Get next node in global list - * @prev: Previous node or NULL to start iteration - * of_node_put() will be called on it - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_all_nodes(struct device_node *prev) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = prev ? prev->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (of_node_get(np)) - break; - if (prev) - of_node_put(prev); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_all_nodes); - -/** - * of_get_parent - Get a node's parent if any - * @node: Node to get parent - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_parent(const struct device_node *node) -{ - struct device_node *np; - - if (!node) - return NULL; - - read_lock(&devtree_lock); - np = of_node_get(node->parent); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_get_parent); - -/** - * of_get_next_child - Iterate a node childs - * @node: parent node - * @prev: previous child of the parent node, or NULL to get first - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev) -{ - struct device_node *next; - - read_lock(&devtree_lock); - next = prev ? prev->sibling : node->child; - for (; next != 0; next = next->sibling) - if (of_node_get(next)) - break; - if (prev) - of_node_put(prev); - read_unlock(&devtree_lock); - return next; -} -EXPORT_SYMBOL(of_get_next_child); - -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns node. - */ -struct device_node *of_node_get(struct device_node *node) -{ - if (node) - kref_get(&node->kref); - return node; -} -EXPORT_SYMBOL(of_node_get); - -static inline struct device_node * kref_to_device_node(struct kref *kref) -{ - return container_of(kref, struct device_node, kref); -} - -/** - * of_node_release - release a dynamically allocated node - * @kref: kref element of the node to be released - * - * In of_node_put() this function is passed to kref_put() - * as the destructor. - */ -static void of_node_release(struct kref *kref) -{ - struct device_node *node = kref_to_device_node(kref); - struct property *prop = node->properties; - - if (!OF_IS_DYNAMIC(node)) - return; - while (prop) { - struct property *next = prop->next; - kfree(prop->name); - kfree(prop->value); - kfree(prop); - prop = next; - } - kfree(node->intrs); - kfree(node->addrs); - kfree(node->full_name); - kfree(node->data); - kfree(node); -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - */ -void of_node_put(struct device_node *node) -{ - if (node) - kref_put(&node->kref, of_node_release); -} -EXPORT_SYMBOL(of_node_put); - -/* - * Fix up the uninitialized fields in a new device node: - * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields - * - * A lot of boot-time code is duplicated here, because functions such - * as finish_node_interrupts, interpret_pci_props, etc. cannot use the - * slab allocator. - * - * This should probably be split up into smaller chunks. - */ - -static int of_finish_dynamic_node(struct device_node *node, - unsigned long *unused1, int unused2, - int unused3, int unused4) -{ - struct device_node *parent = of_get_parent(node); - int err = 0; - phandle *ibm_phandle; - - node->name = get_property(node, "name", NULL); - node->type = get_property(node, "device_type", NULL); - - if (!parent) { - err = -ENODEV; - goto out; - } - - /* We don't support that function on PowerMac, at least - * not yet - */ - if (systemcfg->platform == PLATFORM_POWERMAC) - return -ENODEV; - - /* fix up new node's linux_phandle field */ - if ((ibm_phandle = (unsigned int *)get_property(node, "ibm,phandle", NULL))) - node->linux_phandle = *ibm_phandle; - -out: - of_node_put(parent); - return err; -} - -/* - * Plug a device node into the tree and global list. - */ -void of_attach_node(struct device_node *np) -{ - write_lock(&devtree_lock); - np->sibling = np->parent->child; - np->allnext = allnodes; - np->parent->child = np; - allnodes = np; - write_unlock(&devtree_lock); -} - -/* - * "Unplug" a node from the device tree. The caller must hold - * a reference to the node. The memory associated with the node - * is not freed until its refcount goes to zero. - */ -void of_detach_node(const struct device_node *np) -{ - struct device_node *parent; - - write_lock(&devtree_lock); - - parent = np->parent; - - if (allnodes == np) - allnodes = np->allnext; - else { - struct device_node *prev; - for (prev = allnodes; - prev->allnext != np; - prev = prev->allnext) - ; - prev->allnext = np->allnext; - } - - if (parent->child == np) - parent->child = np->sibling; - else { - struct device_node *prevsib; - for (prevsib = np->parent->child; - prevsib->sibling != np; - prevsib = prevsib->sibling) - ; - prevsib->sibling = np->sibling; - } - - write_unlock(&devtree_lock); -} - -static int prom_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) -{ - int err; - - switch (action) { - case PSERIES_RECONFIG_ADD: - err = finish_node(node, NULL, of_finish_dynamic_node, 0, 0, 0); - if (err < 0) { - printk(KERN_ERR "finish_node returned %d\n", err); - err = NOTIFY_BAD; - } - break; - default: - err = NOTIFY_DONE; - break; - } - return err; -} - -static struct notifier_block prom_reconfig_nb = { - .notifier_call = prom_reconfig_notifier, - .priority = 10, /* This one needs to run first */ -}; - -static int __init prom_reconfig_setup(void) -{ - return pSeries_reconfig_notifier_register(&prom_reconfig_nb); -} -__initcall(prom_reconfig_setup); - -/* - * Find a property with a given name for a given node - * and return the value. - */ -unsigned char * -get_property(struct device_node *np, const char *name, int *lenp) -{ - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) - if (strcmp(pp->name, name) == 0) { - if (lenp != 0) - *lenp = pp->length; - return pp->value; - } - return NULL; -} -EXPORT_SYMBOL(get_property); - -/* - * Add a property to a node - */ -void -prom_add_property(struct device_node* np, struct property* prop) -{ - struct property **next = &np->properties; - - prop->next = NULL; - while (*next) - next = &(*next)->next; - *next = prop; -} - -#if 0 -void -print_properties(struct device_node *np) -{ - struct property *pp; - char *cp; - int i, n; - - for (pp = np->properties; pp != 0; pp = pp->next) { - printk(KERN_INFO "%s", pp->name); - for (i = strlen(pp->name); i < 16; ++i) - printk(" "); - cp = (char *) pp->value; - for (i = pp->length; i > 0; --i, ++cp) - if ((i > 1 && (*cp < 0x20 || *cp > 0x7e)) - || (i == 1 && *cp != 0)) - break; - if (i == 0 && pp->length > 1) { - /* looks like a string */ - printk(" %s\n", (char *) pp->value); - } else { - /* dump it in hex */ - n = pp->length; - if (n > 64) - n = 64; - if (pp->length % 4 == 0) { - unsigned int *p = (unsigned int *) pp->value; - - n /= 4; - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 4) == 0) - printk("\n "); - printk(" %08x", *p++); - } - } else { - unsigned char *bp = pp->value; - - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 16) == 0) - printk("\n "); - printk(" %02x", *bp++); - } - } - printk("\n"); - if (pp->length > 64) - printk(" ... (length = %d)\n", - pp->length); - } - } -} -#endif - - - - - - - - - - diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c deleted file mode 100644 index a4bbca6dbb8b..000000000000 --- a/arch/ppc64/kernel/prom_init.c +++ /dev/null @@ -1,2051 +0,0 @@ -/* - * - * - * Procedures for interfacing to Open Firmware. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. - * {engebret|bergner}@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG_PROM - -#include <stdarg.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/proc_fs.h> -#include <linux/stringify.h> -#include <linux/delay.h> -#include <linux/initrd.h> -#include <linux/bitops.h> -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/abs_addr.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/pci.h> -#include <asm/iommu.h> -#include <asm/ppcdebug.h> -#include <asm/btext.h> -#include <asm/sections.h> -#include <asm/machdep.h> - -#ifdef CONFIG_LOGO_LINUX_CLUT224 -#include <linux/linux_logo.h> -extern const struct linux_logo logo_linux_clut224; -#endif - -/* - * Properties whose value is longer than this get excluded from our - * copy of the device tree. This value does need to be big enough to - * ensure that we don't lose things like the interrupt-map property - * on a PCI-PCI bridge. - */ -#define MAX_PROPERTY_LENGTH (1UL * 1024 * 1024) - -/* - * Eventually bump that one up - */ -#define DEVTREE_CHUNK_SIZE 0x100000 - -/* - * This is the size of the local memory reserve map that gets copied - * into the boot params passed to the kernel. That size is totally - * flexible as the kernel just reads the list until it encounters an - * entry with size 0, so it can be changed without breaking binary - * compatibility - */ -#define MEM_RESERVE_MAP_SIZE 8 - -/* - * prom_init() is called very early on, before the kernel text - * and data have been mapped to KERNELBASE. At this point the code - * is running at whatever address it has been loaded at, so - * references to extern and static variables must be relocated - * explicitly. The procedure reloc_offset() returns the address - * we're currently running at minus the address we were linked at. - * (Note that strings count as static variables.) - * - * Because OF may have mapped I/O devices into the area starting at - * KERNELBASE, particularly on CHRP machines, we can't safely call - * OF once the kernel has been mapped to KERNELBASE. Therefore all - * OF calls should be done within prom_init(), and prom_init() - * and all routines called within it must be careful to relocate - * references as necessary. - * - * Note that the bss is cleared *after* prom_init runs, so we have - * to make sure that any static or extern variables it accesses - * are put in the data segment. - */ - - -#define PROM_BUG() do { \ - prom_printf("kernel BUG at %s line 0x%x!\n", \ - RELOC(__FILE__), __LINE__); \ - __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \ -} while (0) - -#ifdef DEBUG_PROM -#define prom_debug(x...) prom_printf(x) -#else -#define prom_debug(x...) -#endif - - -typedef u32 prom_arg_t; - -struct prom_args { - u32 service; - u32 nargs; - u32 nret; - prom_arg_t args[10]; - prom_arg_t *rets; /* Pointer to return values in args[16]. */ -}; - -struct prom_t { - unsigned long entry; - ihandle root; - ihandle chosen; - int cpu; - ihandle stdout; - ihandle disp_node; - struct prom_args args; - unsigned long version; - unsigned long root_size_cells; - unsigned long root_addr_cells; -}; - -struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; -}; - -struct mem_map_entry { - u64 base; - u64 size; -}; - -typedef u32 cell_t; - -extern void __start(unsigned long r3, unsigned long r4, unsigned long r5); - -extern void enter_prom(struct prom_args *args, unsigned long entry); -extern void copy_and_flush(unsigned long dest, unsigned long src, - unsigned long size, unsigned long offset); - -extern unsigned long klimit; - -/* prom structure */ -static struct prom_t __initdata prom; - -#define PROM_SCRATCH_SIZE 256 - -static char __initdata of_stdout_device[256]; -static char __initdata prom_scratch[PROM_SCRATCH_SIZE]; - -static unsigned long __initdata dt_header_start; -static unsigned long __initdata dt_struct_start, dt_struct_end; -static unsigned long __initdata dt_string_start, dt_string_end; - -static unsigned long __initdata prom_initrd_start, prom_initrd_end; - -static int __initdata iommu_force_on; -static int __initdata ppc64_iommu_off; -static int __initdata of_platform; - -static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; - -static unsigned long __initdata prom_memory_limit; -static unsigned long __initdata prom_tce_alloc_start; -static unsigned long __initdata prom_tce_alloc_end; - -static unsigned long __initdata alloc_top; -static unsigned long __initdata alloc_top_high; -static unsigned long __initdata alloc_bottom; -static unsigned long __initdata rmo_top; -static unsigned long __initdata ram_top; - -static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE]; -static int __initdata mem_reserve_cnt; - -static cell_t __initdata regbuf[1024]; - - -#define MAX_CPU_THREADS 2 - -/* TO GO */ -#ifdef CONFIG_HMT -struct { - unsigned int pir; - unsigned int threadid; -} hmt_thread_data[NR_CPUS]; -#endif /* CONFIG_HMT */ - -/* - * This are used in calls to call_prom. The 4th and following - * arguments to call_prom should be 32-bit values. 64 bit values - * are truncated to 32 bits (and fortunately don't get interpreted - * as two arguments). - */ -#define ADDR(x) (u32) ((unsigned long)(x) - offset) - -/* - * Error results ... some OF calls will return "-1" on error, some - * will return 0, some will return either. To simplify, here are - * macros to use with any ihandle or phandle return value to check if - * it is valid - */ - -#define PROM_ERROR (-1u) -#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) -#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) - - -/* This is the one and *ONLY* place where we actually call open - * firmware from, since we need to make sure we're running in 32b - * mode when we do. We switch back to 64b mode upon return. - */ - -static int __init call_prom(const char *service, int nargs, int nret, ...) -{ - int i; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - va_list list; - - _prom->args.service = ADDR(service); - _prom->args.nargs = nargs; - _prom->args.nret = nret; - _prom->args.rets = (prom_arg_t *)&(_prom->args.args[nargs]); - - va_start(list, nret); - for (i=0; i < nargs; i++) - _prom->args.args[i] = va_arg(list, prom_arg_t); - va_end(list); - - for (i=0; i < nret ;i++) - _prom->args.rets[i] = 0; - - enter_prom(&_prom->args, _prom->entry); - - return (nret > 0) ? _prom->args.rets[0] : 0; -} - - -static unsigned int __init prom_claim(unsigned long virt, unsigned long size, - unsigned long align) -{ - return (unsigned int)call_prom("claim", 3, 1, - (prom_arg_t)virt, (prom_arg_t)size, - (prom_arg_t)align); -} - -static void __init prom_print(const char *msg) -{ - const char *p, *q; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - if (_prom->stdout == 0) - return; - - for (p = msg; *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); - if (*q == 0) - break; - ++q; - call_prom("write", 3, 1, _prom->stdout, ADDR("\r\n"), 2); - } -} - - -static void __init prom_print_hex(unsigned long val) -{ - unsigned long offset = reloc_offset(); - int i, nibbles = sizeof(val)*2; - char buf[sizeof(val)*2+1]; - struct prom_t *_prom = PTRRELOC(&prom); - - for (i = nibbles-1; i >= 0; i--) { - buf[i] = (val & 0xf) + '0'; - if (buf[i] > '9') - buf[i] += ('a'-'0'-10); - val >>= 4; - } - buf[nibbles] = '\0'; - call_prom("write", 3, 1, _prom->stdout, buf, nibbles); -} - - -static void __init prom_printf(const char *format, ...) -{ - unsigned long offset = reloc_offset(); - const char *p, *q, *s; - va_list args; - unsigned long v; - struct prom_t *_prom = PTRRELOC(&prom); - - va_start(args, format); - for (p = PTRRELOC(format); *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); - if (*q == 0) - break; - if (*q == '\n') { - ++q; - call_prom("write", 3, 1, _prom->stdout, - ADDR("\r\n"), 2); - continue; - } - ++q; - if (*q == 0) - break; - switch (*q) { - case 's': - ++q; - s = va_arg(args, const char *); - prom_print(s); - break; - case 'x': - ++q; - v = va_arg(args, unsigned long); - prom_print_hex(v); - break; - } - } -} - - -static void __init __attribute__((noreturn)) prom_panic(const char *reason) -{ - unsigned long offset = reloc_offset(); - - prom_print(PTRRELOC(reason)); - /* ToDo: should put up an SRC here */ - call_prom("exit", 0, 0); - - for (;;) /* should never get here */ - ; -} - - -static int __init prom_next_node(phandle *nodep) -{ - phandle node; - - if ((node = *nodep) != 0 - && (*nodep = call_prom("child", 1, 1, node)) != 0) - return 1; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - for (;;) { - if ((node = call_prom("parent", 1, 1, node)) == 0) - return 0; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - } -} - -static int __init prom_getprop(phandle node, const char *pname, - void *value, size_t valuelen) -{ - unsigned long offset = reloc_offset(); - - return call_prom("getprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); -} - -static int __init prom_getproplen(phandle node, const char *pname) -{ - unsigned long offset = reloc_offset(); - - return call_prom("getproplen", 2, 1, node, ADDR(pname)); -} - -static int __init prom_setprop(phandle node, const char *pname, - void *value, size_t valuelen) -{ - unsigned long offset = reloc_offset(); - - return call_prom("setprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); -} - -/* We can't use the standard versions because of RELOC headaches. */ -#define isxdigit(c) (('0' <= (c) && (c) <= '9') \ - || ('a' <= (c) && (c) <= 'f') \ - || ('A' <= (c) && (c) <= 'F')) - -#define isdigit(c) ('0' <= (c) && (c) <= '9') -#define islower(c) ('a' <= (c) && (c) <= 'z') -#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c)) - -unsigned long prom_strtoul(const char *cp, const char **endp) -{ - unsigned long result = 0, base = 10, value; - - if (*cp == '0') { - base = 8; - cp++; - if (toupper(*cp) == 'X') { - cp++; - base = 16; - } - } - - while (isxdigit(*cp) && - (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) { - result = result * base + value; - cp++; - } - - if (endp) - *endp = cp; - - return result; -} - -unsigned long prom_memparse(const char *ptr, const char **retptr) -{ - unsigned long ret = prom_strtoul(ptr, retptr); - int shift = 0; - - /* - * We can't use a switch here because GCC *may* generate a - * jump table which won't work, because we're not running at - * the address we're linked at. - */ - if ('G' == **retptr || 'g' == **retptr) - shift = 30; - - if ('M' == **retptr || 'm' == **retptr) - shift = 20; - - if ('K' == **retptr || 'k' == **retptr) - shift = 10; - - if (shift) { - ret <<= shift; - (*retptr)++; - } - - return ret; -} - -/* - * Early parsing of the command line passed to the kernel, used for - * "mem=x" and the options that affect the iommu - */ -static void __init early_cmdline_parse(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char *opt, *p; - int l = 0; - - RELOC(prom_cmd_line[0]) = 0; - p = RELOC(prom_cmd_line); - if ((long)_prom->chosen > 0) - l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1); -#ifdef CONFIG_CMDLINE - if (l == 0) /* dbl check */ - strlcpy(RELOC(prom_cmd_line), - RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line)); -#endif /* CONFIG_CMDLINE */ - prom_printf("command line: %s\n", RELOC(prom_cmd_line)); - - opt = strstr(RELOC(prom_cmd_line), RELOC("iommu=")); - if (opt) { - prom_printf("iommu opt is: %s\n", opt); - opt += 6; - while (*opt && *opt == ' ') - opt++; - if (!strncmp(opt, RELOC("off"), 3)) - RELOC(ppc64_iommu_off) = 1; - else if (!strncmp(opt, RELOC("force"), 5)) - RELOC(iommu_force_on) = 1; - } - - opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); - if (opt) { - opt += 4; - RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); - /* Align to 16 MB == size of large page */ - RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); - } -} - -/* - * To tell the firmware what our capabilities are, we have to pass - * it a fake 32-bit ELF header containing a couple of PT_NOTE sections - * that contain structures that contain the actual values. - */ -static struct fake_elf { - Elf32_Ehdr elfhdr; - Elf32_Phdr phdr[2]; - struct chrpnote { - u32 namesz; - u32 descsz; - u32 type; - char name[8]; /* "PowerPC" */ - struct chrpdesc { - u32 real_mode; - u32 real_base; - u32 real_size; - u32 virt_base; - u32 virt_size; - u32 load_base; - } chrpdesc; - } chrpnote; - struct rpanote { - u32 namesz; - u32 descsz; - u32 type; - char name[24]; /* "IBM,RPA-Client-Config" */ - struct rpadesc { - u32 lpar_affinity; - u32 min_rmo_size; - u32 min_rmo_percent; - u32 max_pft_size; - u32 splpar; - u32 min_load; - u32 new_mem_def; - u32 ignore_me; - } rpadesc; - } rpanote; -} fake_elf = { - .elfhdr = { - .e_ident = { 0x7f, 'E', 'L', 'F', - ELFCLASS32, ELFDATA2MSB, EV_CURRENT }, - .e_type = ET_EXEC, /* yeah right */ - .e_machine = EM_PPC, - .e_version = EV_CURRENT, - .e_phoff = offsetof(struct fake_elf, phdr), - .e_phentsize = sizeof(Elf32_Phdr), - .e_phnum = 2 - }, - .phdr = { - [0] = { - .p_type = PT_NOTE, - .p_offset = offsetof(struct fake_elf, chrpnote), - .p_filesz = sizeof(struct chrpnote) - }, [1] = { - .p_type = PT_NOTE, - .p_offset = offsetof(struct fake_elf, rpanote), - .p_filesz = sizeof(struct rpanote) - } - }, - .chrpnote = { - .namesz = sizeof("PowerPC"), - .descsz = sizeof(struct chrpdesc), - .type = 0x1275, - .name = "PowerPC", - .chrpdesc = { - .real_mode = ~0U, /* ~0 means "don't care" */ - .real_base = ~0U, - .real_size = ~0U, - .virt_base = ~0U, - .virt_size = ~0U, - .load_base = ~0U - }, - }, - .rpanote = { - .namesz = sizeof("IBM,RPA-Client-Config"), - .descsz = sizeof(struct rpadesc), - .type = 0x12759999, - .name = "IBM,RPA-Client-Config", - .rpadesc = { - .lpar_affinity = 0, - .min_rmo_size = 64, /* in megabytes */ - .min_rmo_percent = 0, - .max_pft_size = 48, /* 2^48 bytes max PFT size */ - .splpar = 1, - .min_load = ~0U, - .new_mem_def = 0 - } - } -}; - -static void __init prom_send_capabilities(void) -{ - unsigned long offset = reloc_offset(); - ihandle elfloader; - - elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); - if (elfloader == 0) { - prom_printf("couldn't open /packages/elf-loader\n"); - return; - } - call_prom("call-method", 3, 1, ADDR("process-elf-header"), - elfloader, ADDR(&fake_elf)); - call_prom("close", 1, 0, elfloader); -} - -/* - * Memory allocation strategy... our layout is normally: - * - * at 14Mb or more we vmlinux, then a gap and initrd. In some rare cases, initrd - * might end up beeing before the kernel though. We assume this won't override - * the final kernel at 0, we have no provision to handle that in this version, - * but it should hopefully never happen. - * - * alloc_top is set to the top of RMO, eventually shrink down if the TCEs overlap - * alloc_bottom is set to the top of kernel/initrd - * - * from there, allocations are done that way : rtas is allocated topmost, and - * the device-tree is allocated from the bottom. We try to grow the device-tree - * allocation as we progress. If we can't, then we fail, we don't currently have - * a facility to restart elsewhere, but that shouldn't be necessary neither - * - * Note that calls to reserve_mem have to be done explicitely, memory allocated - * with either alloc_up or alloc_down isn't automatically reserved. - */ - - -/* - * Allocates memory in the RMO upward from the kernel/initrd - * - * When align is 0, this is a special case, it means to allocate in place - * at the current location of alloc_bottom or fail (that is basically - * extending the previous allocation). Used for the device-tree flattening - */ -static unsigned long __init alloc_up(unsigned long size, unsigned long align) -{ - unsigned long offset = reloc_offset(); - unsigned long base = _ALIGN_UP(RELOC(alloc_bottom), align); - unsigned long addr = 0; - - prom_debug("alloc_up(%x, %x)\n", size, align); - if (RELOC(ram_top) == 0) - prom_panic("alloc_up() called with mem not initialized\n"); - - if (align) - base = _ALIGN_UP(RELOC(alloc_bottom), align); - else - base = RELOC(alloc_bottom); - - for(; (base + size) <= RELOC(alloc_top); - base = _ALIGN_UP(base + 0x100000, align)) { - prom_debug(" trying: 0x%x\n\r", base); - addr = (unsigned long)prom_claim(base, size, 0); - if (addr != PROM_ERROR) - break; - addr = 0; - if (align == 0) - break; - } - if (addr == 0) - return 0; - RELOC(alloc_bottom) = addr; - - prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); - - return addr; -} - -/* - * Allocates memory downard, either from top of RMO, or if highmem - * is set, from the top of RAM. Note that this one doesn't handle - * failures. In does claim memory if highmem is not set. - */ -static unsigned long __init alloc_down(unsigned long size, unsigned long align, - int highmem) -{ - unsigned long offset = reloc_offset(); - unsigned long base, addr = 0; - - prom_debug("alloc_down(%x, %x, %s)\n", size, align, - highmem ? RELOC("(high)") : RELOC("(low)")); - if (RELOC(ram_top) == 0) - prom_panic("alloc_down() called with mem not initialized\n"); - - if (highmem) { - /* Carve out storage for the TCE table. */ - addr = _ALIGN_DOWN(RELOC(alloc_top_high) - size, align); - if (addr <= RELOC(alloc_bottom)) - return 0; - else { - /* Will we bump into the RMO ? If yes, check out that we - * didn't overlap existing allocations there, if we did, - * we are dead, we must be the first in town ! - */ - if (addr < RELOC(rmo_top)) { - /* Good, we are first */ - if (RELOC(alloc_top) == RELOC(rmo_top)) - RELOC(alloc_top) = RELOC(rmo_top) = addr; - else - return 0; - } - RELOC(alloc_top_high) = addr; - } - goto bail; - } - - base = _ALIGN_DOWN(RELOC(alloc_top) - size, align); - for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { - prom_debug(" trying: 0x%x\n\r", base); - addr = (unsigned long)prom_claim(base, size, 0); - if (addr != PROM_ERROR) - break; - addr = 0; - } - if (addr == 0) - return 0; - RELOC(alloc_top) = addr; - - bail: - prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); - - return addr; -} - -/* - * Parse a "reg" cell - */ -static unsigned long __init prom_next_cell(int s, cell_t **cellp) -{ - cell_t *p = *cellp; - unsigned long r = 0; - - /* Ignore more than 2 cells */ - while (s > 2) { - p++; - s--; - } - while (s) { - r <<= 32; - r |= *(p++); - s--; - } - - *cellp = p; - return r; -} - -/* - * Very dumb function for adding to the memory reserve list, but - * we don't need anything smarter at this point - * - * XXX Eventually check for collisions. They should NEVER happen - * if problems seem to show up, it would be a good start to track - * them down. - */ -static void reserve_mem(unsigned long base, unsigned long size) -{ - unsigned long offset = reloc_offset(); - unsigned long top = base + size; - unsigned long cnt = RELOC(mem_reserve_cnt); - - if (size == 0) - return; - - /* We need to always keep one empty entry so that we - * have our terminator with "size" set to 0 since we are - * dumb and just copy this entire array to the boot params - */ - base = _ALIGN_DOWN(base, PAGE_SIZE); - top = _ALIGN_UP(top, PAGE_SIZE); - size = top - base; - - if (cnt >= (MEM_RESERVE_MAP_SIZE - 1)) - prom_panic("Memory reserve map exhausted !\n"); - RELOC(mem_reserve_map)[cnt].base = base; - RELOC(mem_reserve_map)[cnt].size = size; - RELOC(mem_reserve_cnt) = cnt + 1; -} - -/* - * Initialize memory allocation mecanism, parse "memory" nodes and - * obtain that way the top of memory and RMO to setup out local allocator - */ -static void __init prom_init_mem(void) -{ - phandle node; - char *path, type[64]; - unsigned int plen; - cell_t *p, *endp; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - /* - * We iterate the memory nodes to find - * 1) top of RMO (first node) - * 2) top of memory - */ - prom_debug("root_addr_cells: %x\n", (long)_prom->root_addr_cells); - prom_debug("root_size_cells: %x\n", (long)_prom->root_size_cells); - - prom_debug("scanning memory:\n"); - path = RELOC(prom_scratch); - - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - - if (strcmp(type, RELOC("memory"))) - continue; - - plen = prom_getprop(node, "reg", RELOC(regbuf), sizeof(regbuf)); - if (plen > sizeof(regbuf)) { - prom_printf("memory node too large for buffer !\n"); - plen = sizeof(regbuf); - } - p = RELOC(regbuf); - endp = p + (plen / sizeof(cell_t)); - -#ifdef DEBUG_PROM - memset(path, 0, PROM_SCRATCH_SIZE); - call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); - prom_debug(" node %s :\n", path); -#endif /* DEBUG_PROM */ - - while ((endp - p) >= (_prom->root_addr_cells + _prom->root_size_cells)) { - unsigned long base, size; - - base = prom_next_cell(_prom->root_addr_cells, &p); - size = prom_next_cell(_prom->root_size_cells, &p); - - if (size == 0) - continue; - prom_debug(" %x %x\n", base, size); - if (base == 0) - RELOC(rmo_top) = size; - if ((base + size) > RELOC(ram_top)) - RELOC(ram_top) = base + size; - } - } - - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(klimit) - offset + 0x4000); - - /* Check if we have an initrd after the kernel, if we do move our bottom - * point to after it - */ - if (RELOC(prom_initrd_start)) { - if (RELOC(prom_initrd_end) > RELOC(alloc_bottom)) - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end)); - } - - /* - * If prom_memory_limit is set we reduce the upper limits *except* for - * alloc_top_high. This must be the real top of RAM so we can put - * TCE's up there. - */ - - RELOC(alloc_top_high) = RELOC(ram_top); - - if (RELOC(prom_memory_limit)) { - if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { - prom_printf("Ignoring mem=%x <= alloc_bottom.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { - prom_printf("Ignoring mem=%x >= ram_top.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else { - RELOC(ram_top) = RELOC(prom_memory_limit); - RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); - } - } - - /* - * Setup our top alloc point, that is top of RMO or top of - * segment 0 when running non-LPAR. - */ - if ( RELOC(of_platform) == PLATFORM_PSERIES_LPAR ) - RELOC(alloc_top) = RELOC(rmo_top); - else - /* Some RS64 machines have buggy firmware where claims up at 1GB - * fails. Cap at 768MB as a workaround. Still plenty of room. - */ - RELOC(alloc_top) = RELOC(rmo_top) = min(0x30000000ul, RELOC(ram_top)); - - prom_printf("memory layout at init:\n"); - prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); - prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); - prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_printf(" rmo_top : %x\n", RELOC(rmo_top)); - prom_printf(" ram_top : %x\n", RELOC(ram_top)); -} - - -/* - * Allocate room for and instanciate RTAS - */ -static void __init prom_instantiate_rtas(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - phandle rtas_node; - ihandle rtas_inst; - u32 base, entry = 0; - u32 size = 0; - - prom_debug("prom_instantiate_rtas: start...\n"); - - rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("rtas_node: %x\n", rtas_node); - if (!PHANDLE_VALID(rtas_node)) - return; - - prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); - if (size == 0) - return; - - base = alloc_down(size, PAGE_SIZE, 0); - if (base == 0) { - prom_printf("RTAS allocation failed !\n"); - return; - } - - rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); - if (!IHANDLE_VALID(rtas_inst)) { - prom_printf("opening rtas package failed"); - return; - } - - prom_printf("instantiating rtas at 0x%x ...", base); - - if (call_prom("call-method", 3, 2, - ADDR("instantiate-rtas"), - rtas_inst, base) != PROM_ERROR) { - entry = (long)_prom->args.rets[1]; - } - if (entry == 0) { - prom_printf(" failed\n"); - return; - } - prom_printf(" done\n"); - - reserve_mem(base, size); - - prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); - - prom_debug("rtas base = 0x%x\n", base); - prom_debug("rtas entry = 0x%x\n", entry); - prom_debug("rtas size = 0x%x\n", (long)size); - - prom_debug("prom_instantiate_rtas: end...\n"); -} - - -/* - * Allocate room for and initialize TCE tables - */ -static void __init prom_initialize_tce_table(void) -{ - phandle node; - ihandle phb_node; - unsigned long offset = reloc_offset(); - char compatible[64], type[64], model[64]; - char *path = RELOC(prom_scratch); - u64 base, align; - u32 minalign, minsize; - u64 tce_entry, *tce_entryp; - u64 local_alloc_top, local_alloc_bottom; - u64 i; - - if (RELOC(ppc64_iommu_off)) - return; - - prom_debug("starting prom_initialize_tce_table\n"); - - /* Cache current top of allocs so we reserve a single block */ - local_alloc_top = RELOC(alloc_top_high); - local_alloc_bottom = local_alloc_top; - - /* Search all nodes looking for PHBs. */ - for (node = 0; prom_next_node(&node); ) { - compatible[0] = 0; - type[0] = 0; - model[0] = 0; - prom_getprop(node, "compatible", - compatible, sizeof(compatible)); - prom_getprop(node, "device_type", type, sizeof(type)); - prom_getprop(node, "model", model, sizeof(model)); - - if ((type[0] == 0) || (strstr(type, RELOC("pci")) == NULL)) - continue; - - /* Keep the old logic in tack to avoid regression. */ - if (compatible[0] != 0) { - if ((strstr(compatible, RELOC("python")) == NULL) && - (strstr(compatible, RELOC("Speedwagon")) == NULL) && - (strstr(compatible, RELOC("Winnipeg")) == NULL)) - continue; - } else if (model[0] != 0) { - if ((strstr(model, RELOC("ython")) == NULL) && - (strstr(model, RELOC("peedwagon")) == NULL) && - (strstr(model, RELOC("innipeg")) == NULL)) - continue; - } - - if (prom_getprop(node, "tce-table-minalign", &minalign, - sizeof(minalign)) == PROM_ERROR) - minalign = 0; - if (prom_getprop(node, "tce-table-minsize", &minsize, - sizeof(minsize)) == PROM_ERROR) - minsize = 4UL << 20; - - /* - * Even though we read what OF wants, we just set the table - * size to 4 MB. This is enough to map 2GB of PCI DMA space. - * By doing this, we avoid the pitfalls of trying to DMA to - * MMIO space and the DMA alias hole. - * - * On POWER4, firmware sets the TCE region by assuming - * each TCE table is 8MB. Using this memory for anything - * else will impact performance, so we always allocate 8MB. - * Anton - */ - if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p)) - minsize = 8UL << 20; - else - minsize = 4UL << 20; - - /* Align to the greater of the align or size */ - align = max(minalign, minsize); - base = alloc_down(minsize, align, 1); - if (base == 0) - prom_panic("ERROR, cannot find space for TCE table.\n"); - if (base < local_alloc_bottom) - local_alloc_bottom = base; - - /* Save away the TCE table attributes for later use. */ - prom_setprop(node, "linux,tce-base", &base, sizeof(base)); - prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize)); - - /* It seems OF doesn't null-terminate the path :-( */ - memset(path, 0, sizeof(path)); - /* Call OF to setup the TCE hardware */ - if (call_prom("package-to-path", 3, 1, node, - path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) { - prom_printf("package-to-path failed\n"); - } - - prom_debug("TCE table: %s\n", path); - prom_debug("\tnode = 0x%x\n", node); - prom_debug("\tbase = 0x%x\n", base); - prom_debug("\tsize = 0x%x\n", minsize); - - /* Initialize the table to have a one-to-one mapping - * over the allocated size. - */ - tce_entryp = (unsigned long *)base; - for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) { - tce_entry = (i << PAGE_SHIFT); - tce_entry |= 0x3; - *tce_entryp = tce_entry; - } - - prom_printf("opening PHB %s", path); - phb_node = call_prom("open", 1, 1, path); - if (phb_node == 0) - prom_printf("... failed\n"); - else - prom_printf("... done\n"); - - call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"), - phb_node, -1, minsize, - (u32) base, (u32) (base >> 32)); - call_prom("close", 1, 0, phb_node); - } - - reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom); - - if (RELOC(prom_memory_limit)) { - /* - * We align the start to a 16MB boundary so we can map the TCE area - * using large pages if possible. The end should be the top of RAM - * so no need to align it. - */ - RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom, 0x1000000); - RELOC(prom_tce_alloc_end) = local_alloc_top; - } - - /* Flag the first invalid entry */ - prom_debug("ending prom_initialize_tce_table\n"); -} - -/* - * With CHRP SMP we need to use the OF to start the other - * processors so we can't wait until smp_boot_cpus (the OF is - * trashed by then) so we have to put the processors into - * a holding pattern controlled by the kernel (not OF) before - * we destroy the OF. - * - * This uses a chunk of low memory, puts some holding pattern - * code there and sends the other processors off to there until - * smp_boot_cpus tells them to do something. The holding pattern - * checks that address until its cpu # is there, when it is that - * cpu jumps to __secondary_start(). smp_boot_cpus() takes care - * of setting those values. - * - * We also use physical address 0x4 here to tell when a cpu - * is in its holding pattern code. - * - * Fixup comment... DRENG / PPPBBB - Peter - * - * -- Cort - */ -static void __init prom_hold_cpus(void) -{ - unsigned long i; - unsigned int reg; - phandle node; - unsigned long offset = reloc_offset(); - char type[64]; - int cpuid = 0; - unsigned int interrupt_server[MAX_CPU_THREADS]; - unsigned int cpu_threads, hw_cpu_num; - int propsize; - extern void __secondary_hold(void); - extern unsigned long __secondary_hold_spinloop; - extern unsigned long __secondary_hold_acknowledge; - unsigned long *spinloop - = (void *)virt_to_abs(&__secondary_hold_spinloop); - unsigned long *acknowledge - = (void *)virt_to_abs(&__secondary_hold_acknowledge); - unsigned long secondary_hold - = virt_to_abs(*PTRRELOC((unsigned long *)__secondary_hold)); - struct prom_t *_prom = PTRRELOC(&prom); - - prom_debug("prom_hold_cpus: start...\n"); - prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop); - prom_debug(" 1) *spinloop = 0x%x\n", *spinloop); - prom_debug(" 1) acknowledge = 0x%x\n", - (unsigned long)acknowledge); - prom_debug(" 1) *acknowledge = 0x%x\n", *acknowledge); - prom_debug(" 1) secondary_hold = 0x%x\n", secondary_hold); - - /* Set the common spinloop variable, so all of the secondary cpus - * will block when they are awakened from their OF spinloop. - * This must occur for both SMP and non SMP kernels, since OF will - * be trashed when we move the kernel. - */ - *spinloop = 0; - -#ifdef CONFIG_HMT - for (i=0; i < NR_CPUS; i++) { - RELOC(hmt_thread_data)[i].pir = 0xdeadbeef; - } -#endif - /* look for cpus */ - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("cpu")) != 0) - continue; - - /* Skip non-configured cpus. */ - if (prom_getprop(node, "status", type, sizeof(type)) > 0) - if (strcmp(type, RELOC("okay")) != 0) - continue; - - reg = -1; - prom_getprop(node, "reg", ®, sizeof(reg)); - - prom_debug("\ncpuid = 0x%x\n", cpuid); - prom_debug("cpu hw idx = 0x%x\n", reg); - - /* Init the acknowledge var which will be reset by - * the secondary cpu when it awakens from its OF - * spinloop. - */ - *acknowledge = (unsigned long)-1; - - propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s", - &interrupt_server, - sizeof(interrupt_server)); - if (propsize < 0) { - /* no property. old hardware has no SMT */ - cpu_threads = 1; - interrupt_server[0] = reg; /* fake it with phys id */ - } else { - /* We have a threaded processor */ - cpu_threads = propsize / sizeof(u32); - if (cpu_threads > MAX_CPU_THREADS) { - prom_printf("SMT: too many threads!\n" - "SMT: found %x, max is %x\n", - cpu_threads, MAX_CPU_THREADS); - cpu_threads = 1; /* ToDo: panic? */ - } - } - - hw_cpu_num = interrupt_server[0]; - if (hw_cpu_num != _prom->cpu) { - /* Primary Thread of non-boot cpu */ - prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg); - call_prom("start-cpu", 3, 0, node, - secondary_hold, reg); - - for ( i = 0 ; (i < 100000000) && - (*acknowledge == ((unsigned long)-1)); i++ ) - mb(); - - if (*acknowledge == reg) { - prom_printf("done\n"); - /* We have to get every CPU out of OF, - * even if we never start it. */ - if (cpuid >= NR_CPUS) - goto next; - } else { - prom_printf("failed: %x\n", *acknowledge); - } - } -#ifdef CONFIG_SMP - else - prom_printf("%x : boot cpu %x\n", cpuid, reg); -#endif -next: -#ifdef CONFIG_SMP - /* Init paca for secondary threads. They start later. */ - for (i=1; i < cpu_threads; i++) { - cpuid++; - if (cpuid >= NR_CPUS) - continue; - } -#endif /* CONFIG_SMP */ - cpuid++; - } -#ifdef CONFIG_HMT - /* Only enable HMT on processors that provide support. */ - if (__is_processor(PV_PULSAR) || - __is_processor(PV_ICESTAR) || - __is_processor(PV_SSTAR)) { - prom_printf(" starting secondary threads\n"); - - for (i = 0; i < NR_CPUS; i += 2) { - if (!cpu_online(i)) - continue; - - if (i == 0) { - unsigned long pir = mfspr(SPRN_PIR); - if (__is_processor(PV_PULSAR)) { - RELOC(hmt_thread_data)[i].pir = - pir & 0x1f; - } else { - RELOC(hmt_thread_data)[i].pir = - pir & 0x3ff; - } - } - } - } else { - prom_printf("Processor is not HMT capable\n"); - } -#endif - - if (cpuid > NR_CPUS) - prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) - ") exceeded: ignoring extras\n"); - - prom_debug("prom_hold_cpus: end...\n"); -} - - -static void __init prom_init_client_services(unsigned long pp) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - /* Get a handle to the prom entry point before anything else */ - _prom->entry = pp; - - /* Init default value for phys size */ - _prom->root_size_cells = 1; - _prom->root_addr_cells = 2; - - /* get a handle for the stdout device */ - _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if (!PHANDLE_VALID(_prom->chosen)) - prom_panic("cannot find chosen"); /* msg won't be printed :( */ - - /* get device tree root */ - _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if (!PHANDLE_VALID(_prom->root)) - prom_panic("cannot find device tree root"); /* msg won't be printed :( */ -} - -static void __init prom_init_stdout(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char *path = RELOC(of_stdout_device); - char type[16]; - u32 val; - - if (prom_getprop(_prom->chosen, "stdout", &val, sizeof(val)) <= 0) - prom_panic("cannot find stdout"); - - _prom->stdout = val; - - /* Get the full OF pathname of the stdout device */ - memset(path, 0, 256); - call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255); - val = call_prom("instance-to-package", 1, 1, _prom->stdout); - prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val)); - prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device)); - prom_setprop(_prom->chosen, "linux,stdout-path", - RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1); - - /* If it's a display, note it */ - memset(type, 0, sizeof(type)); - prom_getprop(val, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) == 0) { - _prom->disp_node = val; - prom_setprop(val, "linux,boot-display", NULL, 0); - } -} - -static void __init prom_close_stdin(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - ihandle val; - - if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) - call_prom("close", 1, 0, val); -} - -static int __init prom_find_machine_type(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char compat[256]; - int len, i = 0; - phandle rtas; - - len = prom_getprop(_prom->root, "compatible", - compat, sizeof(compat)-1); - if (len > 0) { - compat[len] = 0; - while (i < len) { - char *p = &compat[i]; - int sl = strlen(p); - if (sl == 0) - break; - if (strstr(p, RELOC("Power Macintosh")) || - strstr(p, RELOC("MacRISC4"))) - return PLATFORM_POWERMAC; - if (strstr(p, RELOC("Momentum,Maple"))) - return PLATFORM_MAPLE; - i += sl + 1; - } - } - /* Default to pSeries. We need to know if we are running LPAR */ - rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (PHANDLE_VALID(rtas)) { - int x = prom_getproplen(rtas, "ibm,hypertas-functions"); - if (x != PROM_ERROR) { - prom_printf("Hypertas detected, assuming LPAR !\n"); - return PLATFORM_PSERIES_LPAR; - } - } - return PLATFORM_PSERIES; -} - -static int __init prom_set_color(ihandle ih, int i, int r, int g, int b) -{ - unsigned long offset = reloc_offset(); - - return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r); -} - -/* - * If we have a display that we don't know how to drive, - * we will want to try to execute OF's open method for it - * later. However, OF will probably fall over if we do that - * we've taken over the MMU. - * So we check whether we will need to open the display, - * and if so, open it now. - */ -static void __init prom_check_displays(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char type[16], *path; - phandle node; - ihandle ih; - int i; - - static unsigned char default_colors[] = { - 0x00, 0x00, 0x00, - 0x00, 0x00, 0xaa, - 0x00, 0xaa, 0x00, - 0x00, 0xaa, 0xaa, - 0xaa, 0x00, 0x00, - 0xaa, 0x00, 0xaa, - 0xaa, 0xaa, 0x00, - 0xaa, 0xaa, 0xaa, - 0x55, 0x55, 0x55, - 0x55, 0x55, 0xff, - 0x55, 0xff, 0x55, - 0x55, 0xff, 0xff, - 0xff, 0x55, 0x55, - 0xff, 0x55, 0xff, - 0xff, 0xff, 0x55, - 0xff, 0xff, 0xff - }; - const unsigned char *clut; - - prom_printf("Looking for displays\n"); - for (node = 0; prom_next_node(&node); ) { - memset(type, 0, sizeof(type)); - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) != 0) - continue; - - /* It seems OF doesn't null-terminate the path :-( */ - path = RELOC(prom_scratch); - memset(path, 0, PROM_SCRATCH_SIZE); - - /* - * leave some room at the end of the path for appending extra - * arguments - */ - if (call_prom("package-to-path", 3, 1, node, path, - PROM_SCRATCH_SIZE-10) == PROM_ERROR) - continue; - prom_printf("found display : %s, opening ... ", path); - - ih = call_prom("open", 1, 1, path); - if (ih == 0) { - prom_printf("failed\n"); - continue; - } - - /* Success */ - prom_printf("done\n"); - prom_setprop(node, "linux,opened", NULL, 0); - - /* - * stdout wasn't a display node, pick the first we can find - * for btext - */ - if (_prom->disp_node == 0) - _prom->disp_node = node; - - /* Setup a useable color table when the appropriate - * method is available. Should update this to set-colors */ - clut = RELOC(default_colors); - for (i = 0; i < 32; i++, clut += 3) - if (prom_set_color(ih, i, clut[0], clut[1], - clut[2]) != 0) - break; - -#ifdef CONFIG_LOGO_LINUX_CLUT224 - clut = PTRRELOC(RELOC(logo_linux_clut224.clut)); - for (i = 0; i < RELOC(logo_linux_clut224.clutsize); i++, clut += 3) - if (prom_set_color(ih, i + 32, clut[0], clut[1], - clut[2]) != 0) - break; -#endif /* CONFIG_LOGO_LINUX_CLUT224 */ - } -} - - -/* Return (relocated) pointer to this much memory: moves initrd if reqd. */ -static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, - unsigned long needed, unsigned long align) -{ - unsigned long offset = reloc_offset(); - void *ret; - - *mem_start = _ALIGN(*mem_start, align); - while ((*mem_start + needed) > *mem_end) { - unsigned long room, chunk; - - prom_debug("Chunk exhausted, claiming more at %x...\n", - RELOC(alloc_bottom)); - room = RELOC(alloc_top) - RELOC(alloc_bottom); - if (room > DEVTREE_CHUNK_SIZE) - room = DEVTREE_CHUNK_SIZE; - if (room < PAGE_SIZE) - prom_panic("No memory for flatten_device_tree (no room)"); - chunk = alloc_up(room, 0); - if (chunk == 0) - prom_panic("No memory for flatten_device_tree (claim failed)"); - *mem_end = RELOC(alloc_top); - } - - ret = (void *)*mem_start; - *mem_start += needed; - - return ret; -} - -#define dt_push_token(token, mem_start, mem_end) \ - do { *((u32 *)make_room(mem_start, mem_end, 4, 4)) = token; } while(0) - -static unsigned long __init dt_find_string(char *str) -{ - unsigned long offset = reloc_offset(); - char *s, *os; - - s = os = (char *)RELOC(dt_string_start); - s += 4; - while (s < (char *)RELOC(dt_string_end)) { - if (strcmp(s, str) == 0) - return s - os; - s += strlen(s) + 1; - } - return 0; -} - -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - -static void __init scan_dt_build_strings(phandle node, - unsigned long *mem_start, - unsigned long *mem_end) -{ - unsigned long offset = reloc_offset(); - char *prev_name, *namep, *sstart; - unsigned long soff; - phandle child; - - sstart = (char *)RELOC(dt_string_start); - - /* get and store all property names */ - prev_name = RELOC(""); - for (;;) { - /* 64 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) != 1) { - /* No more nodes: unwind alloc */ - *mem_start = (unsigned long)namep; - break; - } - - /* skip "name" */ - if (strcmp(namep, RELOC("name")) == 0) { - *mem_start = (unsigned long)namep; - prev_name = RELOC("name"); - continue; - } - /* get/create string entry */ - soff = dt_find_string(namep); - if (soff != 0) { - *mem_start = (unsigned long)namep; - namep = sstart + soff; - } else { - /* Trim off some if we can */ - *mem_start = (unsigned long)namep + strlen(namep) + 1; - RELOC(dt_string_end) = *mem_start; - } - prev_name = namep; - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - scan_dt_build_strings(child, mem_start, mem_end); - child = call_prom("peer", 1, 1, child); - } -} - -static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, - unsigned long *mem_end) -{ - phandle child; - char *namep, *prev_name, *sstart, *p, *ep, *lp, *path; - unsigned long soff; - unsigned char *valp; - unsigned long offset = reloc_offset(); - static char pname[MAX_PROPERTY_NAME]; - int l; - - dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end); - - /* get the node's full name */ - namep = (char *)*mem_start; - l = call_prom("package-to-path", 3, 1, node, - namep, *mem_end - *mem_start); - if (l >= 0) { - /* Didn't fit? Get more room. */ - if ((l+1) > (*mem_end - *mem_start)) { - namep = make_room(mem_start, mem_end, l+1, 1); - call_prom("package-to-path", 3, 1, node, namep, l); - } - namep[l] = '\0'; - - /* Fixup an Apple bug where they have bogus \0 chars in the - * middle of the path in some properties - */ - for (p = namep, ep = namep + l; p < ep; p++) - if (*p == '\0') { - memmove(p, p+1, ep - p); - ep--; l--; p--; - } - - /* now try to extract the unit name in that mess */ - for (p = namep, lp = NULL; *p; p++) - if (*p == '/') - lp = p + 1; - if (lp != NULL) - memmove(namep, lp, strlen(lp) + 1); - *mem_start = _ALIGN(((unsigned long) namep) + - strlen(namep) + 1, 4); - } - - /* get it again for debugging */ - path = RELOC(prom_scratch); - memset(path, 0, PROM_SCRATCH_SIZE); - call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); - - /* get and store all properties */ - prev_name = RELOC(""); - sstart = (char *)RELOC(dt_string_start); - for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, - RELOC(pname)) != 1) - break; - - /* skip "name" */ - if (strcmp(RELOC(pname), RELOC("name")) == 0) { - prev_name = RELOC("name"); - continue; - } - - /* find string offset */ - soff = dt_find_string(RELOC(pname)); - if (soff == 0) { - prom_printf("WARNING: Can't find string index for" - " <%s>, node %s\n", RELOC(pname), path); - break; - } - prev_name = sstart + soff; - - /* get length */ - l = call_prom("getproplen", 2, 1, node, RELOC(pname)); - - /* sanity checks */ - if (l == PROM_ERROR) - continue; - if (l > MAX_PROPERTY_LENGTH) { - prom_printf("WARNING: ignoring large property "); - /* It seems OF doesn't null-terminate the path :-( */ - prom_printf("[%s] ", path); - prom_printf("%s length 0x%x\n", RELOC(pname), l); - continue; - } - - /* push property head */ - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(l, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - - /* push property content */ - valp = make_room(mem_start, mem_end, l, 4); - call_prom("getprop", 4, 1, node, RELOC(pname), valp, l); - *mem_start = _ALIGN(*mem_start, 4); - } - - /* Add a "linux,phandle" property. */ - soff = dt_find_string(RELOC("linux,phandle")); - if (soff == 0) - prom_printf("WARNING: Can't find string index for" - " <linux-phandle> node %s\n", path); - else { - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(4, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - valp = make_room(mem_start, mem_end, 4, 4); - *(u32 *)valp = node; - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - scan_dt_build_struct(child, mem_start, mem_end); - child = call_prom("peer", 1, 1, child); - } - - dt_push_token(OF_DT_END_NODE, mem_start, mem_end); -} - -static void __init flatten_device_tree(void) -{ - phandle root; - unsigned long offset = reloc_offset(); - unsigned long mem_start, mem_end, room; - struct boot_param_header *hdr; - struct prom_t *_prom = PTRRELOC(&prom); - char *namep; - u64 *rsvmap; - - /* - * Check how much room we have between alloc top & bottom (+/- a - * few pages), crop to 4Mb, as this is our "chuck" size - */ - room = RELOC(alloc_top) - RELOC(alloc_bottom) - 0x4000; - if (room > DEVTREE_CHUNK_SIZE) - room = DEVTREE_CHUNK_SIZE; - prom_debug("starting device tree allocs at %x\n", RELOC(alloc_bottom)); - - /* Now try to claim that */ - mem_start = (unsigned long)alloc_up(room, PAGE_SIZE); - if (mem_start == 0) - prom_panic("Can't allocate initial device-tree chunk\n"); - mem_end = RELOC(alloc_top); - - /* Get root of tree */ - root = call_prom("peer", 1, 1, (phandle)0); - if (root == (phandle)0) - prom_panic ("couldn't get device tree root\n"); - - /* Build header and make room for mem rsv map */ - mem_start = _ALIGN(mem_start, 4); - hdr = make_room(&mem_start, &mem_end, - sizeof(struct boot_param_header), 4); - RELOC(dt_header_start) = (unsigned long)hdr; - rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8); - - /* Start of strings */ - mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_string_start) = mem_start; - mem_start += 4; /* hole */ - - /* Add "linux,phandle" in there, we'll need it */ - namep = make_room(&mem_start, &mem_end, 16, 1); - strcpy(namep, RELOC("linux,phandle")); - mem_start = (unsigned long)namep + strlen(namep) + 1; - - /* Build string array */ - prom_printf("Building dt strings...\n"); - scan_dt_build_strings(root, &mem_start, &mem_end); - RELOC(dt_string_end) = mem_start; - - /* Build structure */ - mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_struct_start) = mem_start; - prom_printf("Building dt structure...\n"); - scan_dt_build_struct(root, &mem_start, &mem_end); - dt_push_token(OF_DT_END, &mem_start, &mem_end); - RELOC(dt_struct_end) = PAGE_ALIGN(mem_start); - - /* Finish header */ - hdr->boot_cpuid_phys = _prom->cpu; - hdr->magic = OF_DT_HEADER; - hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start); - hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start); - hdr->off_dt_strings = RELOC(dt_string_start) - RELOC(dt_header_start); - hdr->dt_strings_size = RELOC(dt_string_end) - RELOC(dt_string_start); - hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - RELOC(dt_header_start); - hdr->version = OF_DT_VERSION; - /* Version 16 is not backward compatible */ - hdr->last_comp_version = 0x10; - - /* Reserve the whole thing and copy the reserve map in, we - * also bump mem_reserve_cnt to cause further reservations to - * fail since it's too late. - */ - reserve_mem(RELOC(dt_header_start), hdr->totalsize); - memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map)); - -#ifdef DEBUG_PROM - { - int i; - prom_printf("reserved memory map:\n"); - for (i = 0; i < RELOC(mem_reserve_cnt); i++) - prom_printf(" %x - %x\n", RELOC(mem_reserve_map)[i].base, - RELOC(mem_reserve_map)[i].size); - } -#endif - RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE; - - prom_printf("Device tree strings 0x%x -> 0x%x\n", - RELOC(dt_string_start), RELOC(dt_string_end)); - prom_printf("Device tree struct 0x%x -> 0x%x\n", - RELOC(dt_struct_start), RELOC(dt_struct_end)); - -} - - -static void __init fixup_device_tree(void) -{ - unsigned long offset = reloc_offset(); - phandle u3, i2c, mpic; - u32 u3_rev; - u32 interrupts[2]; - u32 parent; - - /* Some G5s have a missing interrupt definition, fix it up here */ - u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); - if (!PHANDLE_VALID(u3)) - return; - i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); - if (!PHANDLE_VALID(i2c)) - return; - mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); - if (!PHANDLE_VALID(mpic)) - return; - - /* check if proper rev of u3 */ - if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) - == PROM_ERROR) - return; - if (u3_rev != 0x35 && u3_rev != 0x37) - return; - /* does it need fixup ? */ - if (prom_getproplen(i2c, "interrupts") > 0) - return; - - prom_printf("fixing up bogus interrupts for u3 i2c...\n"); - - /* interrupt on this revision of u3 is number 0 and level */ - interrupts[0] = 0; - interrupts[1] = 1; - prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); - parent = (u32)mpic; - prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); -} - - -static void __init prom_find_boot_cpu(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - u32 getprop_rval; - ihandle prom_cpu; - phandle cpu_pkg; - - if (prom_getprop(_prom->chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0) - prom_panic("cannot find boot cpu"); - - cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu); - - prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval)); - _prom->cpu = getprop_rval; - - prom_debug("Booting CPU hw index = 0x%x\n", _prom->cpu); -} - -static void __init prom_check_initrd(unsigned long r3, unsigned long r4) -{ -#ifdef CONFIG_BLK_DEV_INITRD - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - if ( r3 && r4 && r4 != 0xdeadbeef) { - u64 val; - - RELOC(prom_initrd_start) = (r3 >= KERNELBASE) ? __pa(r3) : r3; - RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; - - val = (u64)RELOC(prom_initrd_start); - prom_setprop(_prom->chosen, "linux,initrd-start", &val, sizeof(val)); - val = (u64)RELOC(prom_initrd_end); - prom_setprop(_prom->chosen, "linux,initrd-end", &val, sizeof(val)); - - reserve_mem(RELOC(prom_initrd_start), - RELOC(prom_initrd_end) - RELOC(prom_initrd_start)); - - prom_debug("initrd_start=0x%x\n", RELOC(prom_initrd_start)); - prom_debug("initrd_end=0x%x\n", RELOC(prom_initrd_end)); - } -#endif /* CONFIG_BLK_DEV_INITRD */ -} - -/* - * We enter here early on, when the Open Firmware prom is still - * handling exceptions and the MMU hash table for us. - */ - -unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long pp, - unsigned long r6, unsigned long r7) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - unsigned long phys = KERNELBASE - offset; - u32 getprop_rval; - - /* - * First zero the BSS - */ - memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start); - - /* - * Init interface to Open Firmware, get some node references, - * like /chosen - */ - prom_init_client_services(pp); - - /* - * Init prom stdout device - */ - prom_init_stdout(); - prom_debug("klimit=0x%x\n", RELOC(klimit)); - prom_debug("offset=0x%x\n", offset); - - /* - * Check for an initrd - */ - prom_check_initrd(r3, r4); - - /* - * Get default machine type. At this point, we do not differenciate - * between pSeries SMP and pSeries LPAR - */ - RELOC(of_platform) = prom_find_machine_type(); - getprop_rval = RELOC(of_platform); - prom_setprop(_prom->chosen, "linux,platform", - &getprop_rval, sizeof(getprop_rval)); - - /* - * On pSeries, inform the firmware about our capabilities - */ - if (RELOC(of_platform) & PLATFORM_PSERIES) - prom_send_capabilities(); - - /* - * On pSeries and Cell, copy the CPU hold code - */ - if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_CELL)) - copy_and_flush(0, KERNELBASE - offset, 0x100, 0); - - /* - * Get memory cells format - */ - getprop_rval = 1; - prom_getprop(_prom->root, "#size-cells", - &getprop_rval, sizeof(getprop_rval)); - _prom->root_size_cells = getprop_rval; - getprop_rval = 2; - prom_getprop(_prom->root, "#address-cells", - &getprop_rval, sizeof(getprop_rval)); - _prom->root_addr_cells = getprop_rval; - - /* - * Do early parsing of command line - */ - early_cmdline_parse(); - - /* - * Initialize memory management within prom_init - */ - prom_init_mem(); - - /* - * Determine which cpu is actually running right _now_ - */ - prom_find_boot_cpu(); - - /* - * Initialize display devices - */ - prom_check_displays(); - - /* - * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else - * that uses the allocator, we need to make sure we get the top of memory - * available for us here... - */ - if (RELOC(of_platform) == PLATFORM_PSERIES) - prom_initialize_tce_table(); - - /* - * On non-powermacs, try to instantiate RTAS and puts all CPUs - * in spin-loops. PowerMacs don't have a working RTAS and use - * a different way to spin CPUs - */ - if (RELOC(of_platform) != PLATFORM_POWERMAC) { - prom_instantiate_rtas(); - prom_hold_cpus(); - } - - /* - * Fill in some infos for use by the kernel later on - */ - if (RELOC(ppc64_iommu_off)) - prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0); - - if (RELOC(iommu_force_on)) - prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0); - - if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "linux,memory-limit", - PTRRELOC(&prom_memory_limit), sizeof(RELOC(prom_memory_limit))); - - if (RELOC(prom_tce_alloc_start)) { - prom_setprop(_prom->chosen, "linux,tce-alloc-start", - PTRRELOC(&prom_tce_alloc_start), sizeof(RELOC(prom_tce_alloc_start))); - prom_setprop(_prom->chosen, "linux,tce-alloc-end", - PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end))); - } - - /* - * Fixup any known bugs in the device-tree - */ - fixup_device_tree(); - - /* - * Now finally create the flattened device-tree - */ - prom_printf("copying OF device tree ...\n"); - flatten_device_tree(); - - /* in case stdin is USB and still active on IBM machines... */ - prom_close_stdin(); - - /* - * Call OF "quiesce" method to shut down pending DMA's from - * devices etc... - */ - prom_printf("Calling quiesce ...\n"); - call_prom("quiesce", 0, 0); - - /* - * And finally, call the kernel passing it the flattened device - * tree and NULL as r5, thus triggering the new entry point which - * is common to us and kexec - */ - prom_printf("returning from prom_init\n"); - prom_debug("->dt_header_start=0x%x\n", RELOC(dt_header_start)); - prom_debug("->phys=0x%x\n", phys); - - __start(RELOC(dt_header_start), phys, 0); - - return 0; -} - diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c deleted file mode 100644 index 79e7ed2858dd..000000000000 --- a/arch/ppc64/kernel/rtc.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Real Time Clock interface for PPC64. - * - * Based on rtc.c by Paul Gortmaker - * - * This driver allows use of the real time clock - * from user space. It exports the /dev/rtc - * interface supporting various ioctl() and also the - * /proc/driver/rtc pseudo-file for status information. - * - * Interface does not support RTC interrupts nor an alarm. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 1.0 Mike Corrigan: IBM iSeries rtc support - * 1.1 Dave Engebretsen: IBM pSeries rtc support - */ - -#define RTC_VERSION "1.1" - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/miscdevice.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/mc146818rtc.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> -#include <linux/spinlock.h> -#include <linux/bcd.h> -#include <linux/interrupt.h> -#include <linux/delay.h> - -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/time.h> -#include <asm/rtas.h> - -#include <asm/machdep.h> - -/* - * We sponge a minor off of the misc major. No need slurping - * up another valuable major dev number for this. If you add - * an ioctl, make sure you don't conflict with SPARC's RTC - * ioctls. - */ - -static ssize_t rtc_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos); - -static int rtc_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -/* - * If this driver ever becomes modularised, it will be really nice - * to make the epoch retain its value across module reload... - */ - -static unsigned long epoch = 1900; /* year corresponding to 0x00 */ - -static const unsigned char days_in_mo[] = -{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -/* - * Now all the various file operations that we export. - */ - -static ssize_t rtc_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - return -EIO; -} - -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct rtc_time wtime; - - switch (cmd) { - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - memset(&wtime, 0, sizeof(struct rtc_time)); - ppc_md.get_rtc_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned int yrs; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time __user *)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - yrs = rtc_tm.tm_year; - mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm.tm_mday; - hrs = rtc_tm.tm_hour; - min = rtc_tm.tm_min; - sec = rtc_tm.tm_sec; - - if (yrs < 70) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ( yrs > 169 ) - return -EINVAL; - - ppc_md.set_rtc_time(&rtc_tm); - - return 0; - } - case RTC_EPOCH_READ: /* Read the epoch. */ - { - return put_user (epoch, (unsigned long __user *)arg); - } - case RTC_EPOCH_SET: /* Set the epoch. */ - { - /* - * There were no RTC clocks before 1900. - */ - if (arg < 1900) - return -EINVAL; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - epoch = arg; - return 0; - } - default: - return -EINVAL; - } - return copy_to_user((void __user *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -static int rtc_open(struct inode *inode, struct file *file) -{ - nonseekable_open(inode, file); - return 0; -} - -static int rtc_release(struct inode *inode, struct file *file) -{ - return 0; -} - -/* - * The various file operations we support. - */ -static struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = rtc_read, - .ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, -}; - -static struct miscdevice rtc_dev = { - .minor = RTC_MINOR, - .name = "rtc", - .fops = &rtc_fops -}; - -static int __init rtc_init(void) -{ - int retval; - - retval = misc_register(&rtc_dev); - if(retval < 0) - return retval; - -#ifdef CONFIG_PROC_FS - if (create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL) - == NULL) { - misc_deregister(&rtc_dev); - return -ENOMEM; - } -#endif - - printk(KERN_INFO "i/pSeries Real Time Clock Driver v" RTC_VERSION "\n"); - - return 0; -} - -static void __exit rtc_exit (void) -{ - remove_proc_entry ("driver/rtc", NULL); - misc_deregister(&rtc_dev); -} - -module_init(rtc_init); -module_exit(rtc_exit); - -/* - * Info exported via "/proc/driver/rtc". - */ - -static int rtc_proc_output (char *buf) -{ - - char *p; - struct rtc_time tm; - - p = buf; - - ppc_md.get_rtc_time(&tm); - - /* - * There is no way to tell if the luser has the RTC set for local - * time or for Universal Standard Time (GMT). Probably local though. - */ - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04lu\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch); - - p += sprintf(p, - "DST_enable\t: no\n" - "BCD\t\t: yes\n" - "24hr\t\t: yes\n" ); - - return p - buf; -} - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = rtc_proc_output (page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) len = count; - if (len<0) len = 0; - return len; -} - -#ifdef CONFIG_PPC_RTAS -#define MAX_RTC_WAIT 5000 /* 5 sec */ -#define RTAS_CLOCK_BUSY (-2) -unsigned long rtas_get_boot_time(void) -{ - int ret[8]; - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - wait_time = rtas_extended_busy_delay_time(error); - /* This is boot time so we spin. */ - udelay(wait_time*1000); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); - return 0; - } - - return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]); -} - -/* NOTE: get_rtc_time will get an error if executed in interrupt context - * and if a delay is needed to read the clock. In this case we just - * silently return without updating rtc_tm. - */ -void rtas_get_rtc_time(struct rtc_time *rtc_tm) -{ - int ret[8]; - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - if (in_interrupt() && printk_ratelimit()) { - printk(KERN_WARNING "error: reading clock would delay interrupt\n"); - return; /* delay not allowed */ - } - wait_time = rtas_extended_busy_delay_time(error); - msleep_interruptible(wait_time); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); - return; - } - - rtc_tm->tm_sec = ret[5]; - rtc_tm->tm_min = ret[4]; - rtc_tm->tm_hour = ret[3]; - rtc_tm->tm_mday = ret[2]; - rtc_tm->tm_mon = ret[1] - 1; - rtc_tm->tm_year = ret[0] - 1900; -} - -int rtas_set_rtc_time(struct rtc_time *tm) -{ - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL, - tm->tm_year + 1900, tm->tm_mon + 1, - tm->tm_mday, tm->tm_hour, tm->tm_min, - tm->tm_sec, 0); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - if (in_interrupt()) - return 1; /* probably decrementer */ - wait_time = rtas_extended_busy_delay_time(error); - msleep_interruptible(wait_time); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) - printk(KERN_WARNING "error: setting the clock failed (%d)\n", - error); - - return 0; -} -#endif diff --git a/arch/ppc64/kernel/semaphore.c b/arch/ppc64/kernel/semaphore.c deleted file mode 100644 index a1c1db573e9c..000000000000 --- a/arch/ppc64/kernel/semaphore.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * - * - * PowerPC-specific semaphore code. - * - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * April 2001 - Reworked by Paul Mackerras <paulus@samba.org> - * to eliminate the SMP races in the old version between the updates - * of `count' and `waking'. Now we use negative `count' values to - * indicate that some process(es) are waiting for the semaphore. - */ - -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/atomic.h> -#include <asm/semaphore.h> -#include <asm/errno.h> - -/* - * Atomically update sem->count. - * This does the equivalent of the following: - * - * old_count = sem->count; - * tmp = MAX(old_count, 0) + incr; - * sem->count = tmp; - * return old_count; - */ -static inline int __sem_update_count(struct semaphore *sem, int incr) -{ - int old_count, tmp; - - __asm__ __volatile__("\n" -"1: lwarx %0,0,%3\n" -" srawi %1,%0,31\n" -" andc %1,%0,%1\n" -" add %1,%1,%4\n" -" stwcx. %1,0,%3\n" -" bne 1b" - : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) - : "r" (&sem->count), "r" (incr), "m" (sem->count) - : "cc"); - - return old_count; -} - -void __up(struct semaphore *sem) -{ - /* - * Note that we incremented count in up() before we came here, - * but that was ineffective since the result was <= 0, and - * any negative value of count is equivalent to 0. - * This ends up setting count to 1, unless count is now > 0 - * (i.e. because some other cpu has called up() in the meantime), - * in which case we just increment count. - */ - __sem_update_count(sem, 1); - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__up); - -/* - * Note that when we come in to __down or __down_interruptible, - * we have already decremented count, but that decrement was - * ineffective since the result was < 0, and any negative value - * of count is equivalent to 0. - * Thus it is only when we decrement count from some value > 0 - * that we have actually got the semaphore. - */ -void __sched __down(struct semaphore *sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_UNINTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - /* - * Try to get the semaphore. If the count is > 0, then we've - * got the semaphore; we decrement count and exit the loop. - * If the count is 0 or negative, we set it to -1, indicating - * that we are asleep, and then sleep. - */ - while (__sem_update_count(sem, -1) <= 0) { - schedule(); - set_task_state(tsk, TASK_UNINTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - /* - * If there are any more sleepers, wake one of them up so - * that it can either get the semaphore, or set count to -1 - * indicating that there are still processes sleeping. - */ - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__down); - -int __sched __down_interruptible(struct semaphore * sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_INTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - while (__sem_update_count(sem, -1) <= 0) { - if (signal_pending(current)) { - /* - * A signal is pending - give up trying. - * Set sem->count to 0 if it is negative, - * since we are no longer sleeping. - */ - __sem_update_count(sem, 0); - retval = -EINTR; - break; - } - schedule(); - set_task_state(tsk, TASK_INTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - wake_up(&sem->wait); - return retval; -} -EXPORT_SYMBOL(__down_interruptible); diff --git a/arch/ppc64/kernel/vdso32/gettimeofday.S b/arch/ppc64/kernel/vdso32/gettimeofday.S deleted file mode 100644 index e243c1d24af7..000000000000 --- a/arch/ppc64/kernel/vdso32/gettimeofday.S +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Userland implementation of gettimeofday() for 32 bits processes in a - * ppc64 kernel for use in the vDSO - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/vdso.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> - - .text -/* - * Exact prototype of gettimeofday - * - * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); - * - */ -V_FUNCTION_BEGIN(__kernel_gettimeofday) - .cfi_startproc - mflr r12 - .cfi_register lr,r12 - - mr r10,r3 /* r10 saves tv */ - mr r11,r4 /* r11 saves tz */ - bl __get_datapage@local /* get data page */ - mr r9, r3 /* datapage ptr in r9 */ - bl __do_get_xsec@local /* get xsec from tb & kernel */ - bne- 2f /* out of line -> do syscall */ - - /* seconds are xsec >> 20 */ - rlwinm r5,r4,12,20,31 - rlwimi r5,r3,12,0,19 - stw r5,TVAL32_TV_SEC(r10) - - /* get remaining xsec and convert to usec. we scale - * up remaining xsec by 12 bits and get the top 32 bits - * of the multiplication - */ - rlwinm r5,r4,12,0,19 - lis r6,1000000@h - ori r6,r6,1000000@l - mulhwu r5,r5,r6 - stw r5,TVAL32_TV_USEC(r10) - - cmpli cr0,r11,0 /* check if tz is NULL */ - beq 1f - lwz r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */ - lwz r5,CFG_TZ_DSTTIME(r9) - stw r4,TZONE_TZ_MINWEST(r11) - stw r5,TZONE_TZ_DSTTIME(r11) - -1: mtlr r12 - li r3,0 - blr - -2: mr r3,r10 - mr r4,r11 - li r0,__NR_gettimeofday - sc - b 1b - .cfi_endproc -V_FUNCTION_END(__kernel_gettimeofday) - -/* - * This is the core of gettimeofday(), it returns the xsec - * value in r3 & r4 and expects the datapage ptr (non clobbered) - * in r9. clobbers r0,r4,r5,r6,r7,r8 -*/ -__do_get_xsec: - .cfi_startproc - /* Check for update count & load values. We use the low - * order 32 bits of the update count - */ -1: lwz r8,(CFG_TB_UPDATE_COUNT+4)(r9) - andi. r0,r8,1 /* pending update ? loop */ - bne- 1b - xor r0,r8,r8 /* create dependency */ - add r9,r9,r0 - - /* Load orig stamp (offset to TB) */ - lwz r5,CFG_TB_ORIG_STAMP(r9) - lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) - - /* Get a stable TB value */ -2: mftbu r3 - mftbl r4 - mftbu r0 - cmpl cr0,r3,r0 - bne- 2b - - /* Substract tb orig stamp. If the high part is non-zero, we jump to the - * slow path which call the syscall. If it's ok, then we have our 32 bits - * tb_ticks value in r7 - */ - subfc r7,r6,r4 - subfe. r0,r5,r3 - bne- 3f - - /* Load scale factor & do multiplication */ - lwz r5,CFG_TB_TO_XS(r9) /* load values */ - lwz r6,(CFG_TB_TO_XS+4)(r9) - mulhwu r4,r7,r5 - mulhwu r6,r7,r6 - mullw r0,r7,r5 - addc r6,r6,r0 - - /* At this point, we have the scaled xsec value in r4 + XER:CA - * we load & add the stamp since epoch - */ - lwz r5,CFG_STAMP_XSEC(r9) - lwz r6,(CFG_STAMP_XSEC+4)(r9) - adde r4,r4,r6 - addze r3,r5 - - /* We now have our result in r3,r4. We create a fake dependency - * on that result and re-check the counter - */ - xor r0,r4,r4 - add r9,r9,r0 - lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9) - cmpl cr0,r8,r0 /* check if updated */ - bne- 1b - - /* Warning ! The caller expects CR:EQ to be set to indicate a - * successful calculation (so it won't fallback to the syscall - * method). We have overriden that CR bit in the counter check, - * but fortunately, the loop exit condition _is_ CR:EQ set, so - * we can exit safely here. If you change this code, be careful - * of that side effect. - */ -3: blr - .cfi_endproc diff --git a/arch/ppc64/kernel/vdso64/gettimeofday.S b/arch/ppc64/kernel/vdso64/gettimeofday.S deleted file mode 100644 index f6df8028570a..000000000000 --- a/arch/ppc64/kernel/vdso64/gettimeofday.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Userland implementation of gettimeofday() for 64 bits processes in a - * ppc64 kernel for use in the vDSO - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), - * IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/vdso.h> -#include <asm/asm-offsets.h> - - .text -/* - * Exact prototype of gettimeofday - * - * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); - * - */ -V_FUNCTION_BEGIN(__kernel_gettimeofday) - .cfi_startproc - mflr r12 - .cfi_register lr,r12 - - mr r11,r3 /* r11 holds tv */ - mr r10,r4 /* r10 holds tz */ - bl V_LOCAL_FUNC(__get_datapage) /* get data page */ - bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ - ori r7,r7,16960 - rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ - rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ - std r5,TVAL64_TV_SEC(r11) /* store sec in tv */ - subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / XSEC_PER_SEC */ - rldicl r0,r0,44,20 - cmpldi cr0,r10,0 /* check if tz is NULL */ - std r0,TVAL64_TV_USEC(r11) /* store usec in tv */ - beq 1f - lwz r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */ - lwz r5,CFG_TZ_DSTTIME(r3) - stw r4,TZONE_TZ_MINWEST(r10) - stw r5,TZONE_TZ_DSTTIME(r10) -1: mtlr r12 - li r3,0 /* always success */ - blr - .cfi_endproc -V_FUNCTION_END(__kernel_gettimeofday) - - -/* - * This is the core of gettimeofday(), it returns the xsec - * value in r4 and expects the datapage ptr (non clobbered) - * in r3. clobbers r0,r4,r5,r6,r7,r8 -*/ -V_FUNCTION_BEGIN(__do_get_xsec) - .cfi_startproc - /* check for update count & load values */ -1: ld r7,CFG_TB_UPDATE_COUNT(r3) - andi. r0,r4,1 /* pending update ? loop */ - bne- 1b - xor r0,r4,r4 /* create dependency */ - add r3,r3,r0 - - /* Get TB & offset it */ - mftb r8 - ld r9,CFG_TB_ORIG_STAMP(r3) - subf r8,r9,r8 - - /* Scale result */ - ld r5,CFG_TB_TO_XS(r3) - mulhdu r8,r8,r5 - - /* Add stamp since epoch */ - ld r6,CFG_STAMP_XSEC(r3) - add r4,r6,r8 - - xor r0,r4,r4 - add r3,r3,r0 - ld r0,CFG_TB_UPDATE_COUNT(r3) - cmpld cr0,r0,r7 /* check if updated */ - bne- 1b - blr - .cfi_endproc -V_FUNCTION_END(__do_get_xsec) diff --git a/arch/ppc64/kernel/vmlinux.lds.S b/arch/ppc64/kernel/vmlinux.lds.S deleted file mode 100644 index 022f220e772f..000000000000 --- a/arch/ppc64/kernel/vmlinux.lds.S +++ /dev/null @@ -1,151 +0,0 @@ -#include <asm/page.h> -#include <asm-generic/vmlinux.lds.h> - -OUTPUT_ARCH(powerpc:common64) -jiffies = jiffies_64; -SECTIONS -{ - /* Sections to be discarded. */ - /DISCARD/ : { - *(.exitcall.exit) - } - - - /* Read-only sections, merged into text segment: */ - .text : { - *(.text .text.*) - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.fixup) - . = ALIGN(PAGE_SIZE); - _etext = .; - } - - __ex_table : { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } - - __bug_table : { - __start___bug_table = .; - *(__bug_table) - __stop___bug_table = .; - } - - __ftr_fixup : { - __start___ftr_fixup = .; - *(__ftr_fixup) - __stop___ftr_fixup = .; - } - - RODATA - - - /* will be freed after init */ - . = ALIGN(PAGE_SIZE); - __init_begin = .; - - .init.text : { - _sinittext = .; - *(.init.text) - _einittext = .; - } - - .init.data : { - *(.init.data) - } - - . = ALIGN(16); - .init.setup : { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - - .initcall.init : { - __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) - __initcall_end = .; - } - - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - - SECURITY_INIT - - . = ALIGN(PAGE_SIZE); - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } - - .data.percpu : { - __per_cpu_start = .; - *(.data.percpu) - __per_cpu_end = .; - } - - . = ALIGN(PAGE_SIZE); - . = ALIGN(16384); - __init_end = .; - /* freed after init ends here */ - - - /* Read/write sections */ - . = ALIGN(PAGE_SIZE); - . = ALIGN(16384); - _sdata = .; - /* The initial task and kernel stack */ - .data.init_task : { - *(.data.init_task) - } - - . = ALIGN(PAGE_SIZE); - .data.page_aligned : { - *(.data.page_aligned) - } - - .data.cacheline_aligned : { - *(.data.cacheline_aligned) - } - - .data : { - *(.data .data.rel* .toc1) - *(.branch_lt) - } - - .opd : { - *(.opd) - } - - .got : { - __toc_start = .; - *(.got) - *(.toc) - . = ALIGN(PAGE_SIZE); - _edata = .; - } - - - . = ALIGN(PAGE_SIZE); - .bss : { - __bss_start = .; - *(.bss) - __bss_stop = .; - } - - . = ALIGN(PAGE_SIZE); - _end = . ; -} diff --git a/arch/ppc64/xmon/privinst.h b/arch/ppc64/xmon/privinst.h deleted file mode 100644 index 02eb40dac0b3..000000000000 --- a/arch/ppc64/xmon/privinst.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define GETREG(reg) \ - static inline unsigned long get_ ## reg (void) \ - { unsigned long ret; asm volatile ("mf" #reg " %0" : "=r" (ret) :); return ret; } - -#define SETREG(reg) \ - static inline void set_ ## reg (unsigned long val) \ - { asm volatile ("mt" #reg " %0" : : "r" (val)); } - -GETREG(msr) -SETREG(msrd) -GETREG(cr) - -#define GSETSPR(n, name) \ - static inline long get_ ## name (void) \ - { long ret; asm volatile ("mfspr %0," #n : "=r" (ret) : ); return ret; } \ - static inline void set_ ## name (long val) \ - { asm volatile ("mtspr " #n ",%0" : : "r" (val)); } - -GSETSPR(0, mq) -GSETSPR(1, xer) -GSETSPR(4, rtcu) -GSETSPR(5, rtcl) -GSETSPR(8, lr) -GSETSPR(9, ctr) -GSETSPR(18, dsisr) -GSETSPR(19, dar) -GSETSPR(22, dec) -GSETSPR(25, sdr1) -GSETSPR(26, srr0) -GSETSPR(27, srr1) -GSETSPR(272, sprg0) -GSETSPR(273, sprg1) -GSETSPR(274, sprg2) -GSETSPR(275, sprg3) -GSETSPR(282, ear) -GSETSPR(287, pvr) -GSETSPR(1008, hid0) -GSETSPR(1009, hid1) -GSETSPR(1010, iabr) -GSETSPR(1023, pir) - -static inline void store_inst(void *p) -{ - asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p)); -} - -static inline void cflush(void *p) -{ - asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p)); -} - -static inline void cinval(void *p) -{ - asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p)); -} diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 98db30481d97..73a09a6ee6c8 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -76,9 +76,7 @@ AFLAGS += $(aflags-y) OBJCOPYFLAGS := -O binary LDFLAGS_vmlinux := -e start -head-$(CONFIG_ARCH_S390_31) += arch/$(ARCH)/kernel/head.o -head-$(CONFIG_ARCH_S390X) += arch/$(ARCH)/kernel/head64.o -head-y += arch/$(ARCH)/kernel/init_task.o +head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o core-y += arch/$(ARCH)/mm/ arch/$(ARCH)/kernel/ arch/$(ARCH)/crypto/ \ arch/$(ARCH)/appldata/ diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index c9f2f60cfa58..dee6ab54984d 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -592,12 +592,15 @@ int appldata_register_ops(struct appldata_ops *ops) */ void appldata_unregister_ops(struct appldata_ops *ops) { + void *table; spin_lock(&appldata_ops_lock); - unregister_sysctl_table(ops->sysctl_header); list_del(&ops->list); - kfree(ops->ctl_table); + /* at that point any incoming access will fail */ + table = ops->ctl_table; ops->ctl_table = NULL; spin_unlock(&appldata_ops_lock); + unregister_sysctl_table(ops->sysctl_header); + kfree(table); P_INFO("%s-ops unregistered!\n", ops->name); } /********************** module-ops management <END> **************************/ diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 8584dd823218..7434c32bc631 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -8,9 +8,7 @@ obj-y := bitmap.o traps.o time.o process.o \ setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ semaphore.o s390_ext.o debug.o profile.o irq.o reipl_diag.o -extra-$(CONFIG_ARCH_S390_31) += head.o -extra-$(CONFIG_ARCH_S390X) += head64.o -extra-y += init_task.o vmlinux.lds +extra-y += head.o init_task.o vmlinux.lds obj-$(CONFIG_MODULES) += s390_ksyms.o module.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index bc59282da762..896d39d0e4ce 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -486,7 +486,7 @@ out: * - goto next entry in p_info */ -extern inline int +static inline int debug_next_entry(file_private_info_t *p_info) { debug_info_t *id; @@ -800,7 +800,7 @@ debug_set_level(debug_info_t* id, int new_level) * - set active entry to next in the ring buffer */ -extern inline void +static inline void proceed_active_entry(debug_info_t * id) { if ((id->active_entries[id->active_area] += id->entry_size) @@ -817,7 +817,7 @@ proceed_active_entry(debug_info_t * id) * - set active area to next in the ring buffer */ -extern inline void +static inline void proceed_active_area(debug_info_t * id) { id->active_area++; @@ -828,7 +828,7 @@ proceed_active_area(debug_info_t * id) * get_active_entry: */ -extern inline debug_entry_t* +static inline debug_entry_t* get_active_entry(debug_info_t * id) { return (debug_entry_t *) (((char *) id->areas[id->active_area] @@ -841,7 +841,7 @@ get_active_entry(debug_info_t * id) * - set timestamp, caller address, cpu number etc. */ -extern inline void +static inline void debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level, int exception) { @@ -971,7 +971,7 @@ debug_entry_t * counts arguments in format string for sprintf view */ -extern inline int +static inline int debug_count_numargs(char *string) { int numargs=0; diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 9b30f4cf32c4..27b07730b7b8 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -288,7 +288,7 @@ sysc_sigpending: bo BASED(sysc_restart) tm __TI_flags+3(%r9),_TIF_SINGLE_STEP bo BASED(sysc_singlestep) - b BASED(sysc_leave) # out of here, do NOT recheck + b BASED(sysc_work_loop) # # _TIF_RESTART_SVC is set, set up registers and restart svc @@ -645,7 +645,7 @@ io_sigpending: l %r1,BASED(.Ldo_signal) basr %r14,%r1 # call do_signal stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - b BASED(io_leave) # out of here, do NOT recheck + b BASED(io_work_loop) /* * External interrupt handler routine diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 7b9b4a2ba1d7..4eb71ffcf484 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -283,7 +283,7 @@ sysc_sigpending: jo sysc_restart tm __TI_flags+7(%r9),_TIF_SINGLE_STEP jo sysc_singlestep - j sysc_leave # out of here, do NOT recheck + j sysc_work_loop # # _TIF_RESTART_SVC is set, set up registers and restart svc @@ -684,7 +684,7 @@ io_sigpending: slgr %r3,%r3 # clear *oldset brasl %r14,do_signal # call do_signal stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - j sysc_leave # out of here, do NOT recheck + j io_work_loop /* * External interrupt handler routine diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 039354d72348..d31a97c89f68 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -1,11 +1,12 @@ /* * arch/s390/kernel/head.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999, 2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> * * There are 5 different IPL methods * 1) load the image directly into ram at address 0 and do an PSW restart @@ -19,12 +20,7 @@ * 5) direct call of start by the SALIPL loader * We use the cpuid to distinguish between VM and native ipl * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 <rvdheij@iae.nl> - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - + * */ #include <linux/config.h> @@ -34,6 +30,12 @@ #include <asm/thread_info.h> #include <asm/page.h> +#ifdef CONFIG_ARCH_S390X +#define ARCH_OFFSET 4 +#else +#define ARCH_OFFSET 0 +#endif + #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW @@ -201,7 +203,7 @@ ssch 0(%r3) # load chunk of 1600 bytes bnz .Llderr .Lwait4irq: - mvc __LC_IO_NEW_PSW(8),.Lnewpsw # set up IO interrupt psw + mvc 0x78(8),.Lnewpsw # set up IO interrupt psw lpsw .Lwaitpsw .Lioint: c %r1,0xb8 # compare subchannel number @@ -265,13 +267,13 @@ iplstart: la %r2,IPL_BS # load start address bas %r14,.Lloader # load rest of ipl image l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE-PARMAREA(%r12) # store ipl device number + st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number # # load parameter file from ipl device # .Lagain1: - l %r2,INITRD_START-PARMAREA(%r12) # use ramdisk location as temp + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # ramdisk loc. is temp bas %r14,.Lloader # load parameter file ltr %r2,%r2 # got anything ? bz .Lnopf @@ -279,7 +281,7 @@ iplstart: bnh .Lnotrunc la %r2,895 .Lnotrunc: - l %r4,INITRD_START-PARMAREA(%r12) + l %r4,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r4),.L_hdr # if it is HDRx bz .Lagain1 # skip dataset header clc 0(3,%r4),.L_eof # if it is EOFx @@ -322,14 +324,14 @@ iplstart: # load ramdisk from ipl device # .Lagain2: - l %r2,INITRD_START-PARMAREA(%r12) # load adr. of ramdisk + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # addr of ramdisk bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE-PARMAREA(%r12) # store size of ramdisk + st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk ltr %r2,%r2 bnz .Lrdcont - st %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found, null it + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found .Lrdcont: - l %r2,INITRD_START-PARMAREA(%r12) + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r2),.L_hdr # skip HDRx and EOFx bz .Lagain2 @@ -432,10 +434,10 @@ start: la %r3,1(%r3) .done: l %r1,.memsize - st %r3,0(%r1) + st %r3,ARCH_OFFSET(%r1) slr %r0,%r0 - st %r0,INITRD_SIZE-PARMAREA(%r11) - st %r0,INITRD_START-PARMAREA(%r11) + st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) + st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) j startup # continue with startup .tbl: .long _ebcasc # translate table .cmd: .long COMMAND_LINE # address of command line buffer @@ -478,304 +480,23 @@ start: .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff -# -# startup-code at 0x10000, running in real mode -# this is called either by the ipl loader or directly by PSW restart -# or linload or SALIPL -# - .org 0x10000 -startup:basr %r13,0 # get base -.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) - basr %r14, %r1 - lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - la %r12,_pstart-.LPG1(%r13) # pointer to parameter area - # move IPL device to lowcore - mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) - -# -# clear bss memory -# - l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss - l %r3,.Lbss_end-.LPG1(%r13) # end of bss - sr %r3,%r2 # length of bss - sr %r4,%r4 # - sr %r5,%r5 # set src,length and pad to zero - sr %r0,%r0 # - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish - - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word -.Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - - stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - st %r1,.Lcr-.LPG1(%r13) - lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 - - mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw - la %r1, .Lsclph-.LPG1(%r13) - a %r1,__LC_EXT_NEW_PSW+4 # set handler - st %r1,__LC_EXT_NEW_PSW+4 - - la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff - la %r1, .Lsccb-PARMAREA(%r4) # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3, %r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) -.Lsclph: - lh %r1,.Lsccbr-PARMAREA(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) -.Lprocsccb: - lhi %r1,0 - icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 - jnz .Lscnd - lhi %r1,0x800 # otherwise report 2GB -.Lscnd: - lhi %r3,0x800 # limit reported memory size to 2GB - cr %r1,%r3 - jl .Lno2gb - lr %r1,%r3 -.Lno2gb: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-PARMAREA(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-PARMAREA(%r13) -.Lcompmem: - mr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) - - .align 4 -.Lget_ipl_device_addr: - .long .Lget_ipl_device -.Lpmask: - .byte 0 -.align 8 -.Lpcext:.long 0x00080000,0x80000000 -.Lcr: - .long 0x00 # place holder for cr0 -.Lwaitsclp: - .long 0x020A0000 - .long .Lsclph -.Lrcp: - .int 0x00120001 # Read SCP forced code -.Lrcp2: - .int 0x00020001 # Read SCP code -.Lonemb: - .int 0x100000 -.Lfchunk: - -# -# find memory chunks. -# - lr %r9,%r3 # end of mem - mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) - la %r1,1 # test in increments of 128KB - sll %r1,17 - l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array - slr %r4,%r4 # set start of chunk to zero - slr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10, MEMORY_CHUNKS # number of chunks -.Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - be .Lsame-.LPG1(%r13) - b .Lchkmem-.LPG1(%r13) -.Lsame: - ar %r5,%r1 # add 128KB to end of chunk - bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop -.Lchkmem: # > 2GB or tprot got a program check - clr %r4,%r5 # chunk size > 0? - be .Lchkloop-.LPG1(%r13) - st %r4,0(%r3) # store start address of chunk - lr %r0,%r5 - slr %r0,%r4 - st %r0,4(%r3) # store size of chunk - st %r6,8(%r3) # store type of chunk - la %r3,12(%r3) - l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size - st %r5,0(%r4) # store last end to memory size - ahi %r10,-1 # update chunk number -.Lchkloop: - lr %r6,%r7 # set access code to last cc - # we got an exception or we're starting a new - # chunk , we must check if we should - # still try to find valid memory (if we detected - # the amount of available storage), and if we - # have chunks left - xr %r0,%r0 - clr %r0,%r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10,0 # do we have chunks left? - je .Ldonemem - alr %r5,%r1 # add 128KB to end of chunk - lr %r4,%r5 # potential new chunk - clr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: - l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags -# -# find out if we are running under VM -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno .Lnovm-.LPG1(%r13) - oi 3(%r12),1 # set VM flag -.Lnovm: - lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne .Lnop390-.LPG1(%r13) - oi 3(%r12),4 # set P/390 flag -.Lnop390: - -# -# find out if we have an IEEE fpu -# - mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) - efpc %r0,0 # test IEEE extract fpc instruction - oi 3(%r12),2 # set IEEE fpu flag -.Lchkfpu: - -# -# find out if we have the CSP instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) - la %r0,0 - lr %r1,%r0 - la %r2,4 - csp %r0,%r2 # Test CSP instruction - oi 3(%r12),8 # set CSP flag -.Lchkcsp: - -# -# find out if we have the MVPG instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) - sr %r0,%r0 - la %r1,0 - la %r2,0 - mvpg %r1,%r2 # Test CSP instruction - oi 3(%r12),16 # set MVPG flag -.Lchkmvpg: - -# -# find out if we have the IDTE instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) - .long 0xb2b10000 # store facility list - tm 0xc8,0x08 # check bit for clearing-by-ASCE - bno .Lchkidte-.LPG1(%r13) - lhi %r1,2094 - lhi %r2,0 - .long 0xb98e2001 - oi 3(%r12),0x80 # set IDTE flag -.Lchkidte: - - lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, - # virtual and never return ... - .align 8 -.Lentry:.long 0x00080000,0x80000000 + _stext -.Lctl: .long 0x04b50002 # cr0: various things - .long 0 # cr1: primary space segment table - .long .Lduct # cr2: dispatchable unit control table - .long 0 # cr3: instruction authorization - .long 0 # cr4: instruction authorization - .long 0xffffffff # cr5: primary-aste origin - .long 0 # cr6: I/O interrupts - .long 0 # cr7: secondary space segment table - .long 0 # cr8: access registers translation - .long 0 # cr9: tracing off - .long 0 # cr10: tracing off - .long 0 # cr11: tracing off - .long 0 # cr12: tracing off - .long 0 # cr13: home space segment table - .long 0xc0000000 # cr14: machine check handling off - .long 0 # cr15: linkage stack operations -.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem -.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu -.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp -.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg -.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte -.Lmemsize:.long memory_size -.Lmchunk:.long memory_chunk -.Lmflags:.long machine_flags -.Lbss_bgn: .long __bss_start -.Lbss_end: .long _end - - .org PARMAREA-64 -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 - -# -# params at 10400 (setup.h) -# - .org PARMAREA - .global _pstart -_pstart: - .long 0,0 # IPL_DEVICE - .long 0,RAMDISK_ORIGIN # INITRD_START - .long 0,RAMDISK_SIZE # INITRD_SIZE - - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 - .org 0x11000 -.Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set -.Lsccbr: - .hword 0x00 # response code -.Lscpincr1: - .hword 0x00 -.Lscpa1: - .byte 0x00 - .fill 89,1,0 -.Lscpa2: - .int 0x00 -.Lscpincr2: - .quad 0x00 - .fill 3984,1,0 - .org 0x12000 - .global _pend -_pend: - +.macro GET_IPL_DEVICE .Lget_ipl_device: basr %r12,0 -.LPG2: l %r1,0xb8 # get sid +.LGID: l %r1,0xb8 # get sid sll %r1,15 # test if subchannel is enabled srl %r1,31 ltr %r1,%r1 bz 0(%r14) # subchannel disabled l %r1,0xb8 - la %r5,.Lipl_schib-.LPG2(%r12) + la %r5,.Lipl_schib-.LGID(%r12) stsch 0(%r5) # get schib of subchannel bnz 0(%r14) # schib not available tm 5(%r5),0x01 # devno valid? bno 0(%r14) - la %r6,ipl_parameter_flags-.LPG2(%r12) + la %r6,ipl_parameter_flags-.LGID(%r12) oi 3(%r6),0x01 # set flag - la %r2,ipl_devno-.LPG2(%r12) + la %r2,ipl_devno-.LGID(%r12) mvc 0(2,%r2),6(%r5) # store devno tm 4(%r5),0x80 # qdio capable device? bno 0(%r14) @@ -816,46 +537,10 @@ ipl_parameter_flags: .globl ipl_devno ipl_devno: .word 0 +.endm -#ifdef CONFIG_SHARED_KERNEL - .org 0x100000 +#ifdef CONFIG_ARCH_S390X +#include "head64.S" +#else +#include "head31.S" #endif - -# -# startup-code, running in virtual mode -# - .globl _stext -_stext: basr %r13,0 # get base -.LPG3: -# -# Setup stack -# - l %r15,.Linittu-.LPG3(%r13) - mvc __LC_CURRENT(4),__TI_task(%r15) - ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE - st %r15,__LC_KERNEL_STACK # set end of kernel stack - ahi %r15,-96 - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - -# check control registers - stctl %c0,%c15,0(%r15) - oi 2(%r15),0x40 # enable sigp emergency signal - oi 0(%r15),0x10 # switch on low address protection - lctl %c0,%c15,0(%r15) - -# - lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess - l %r14,.Lstart-.LPG3(%r13) - basr %r14,%r14 # call start_kernel -# -# We returned from start_kernel ?!? PANIK -# - basr %r13,0 - lpsw .Ldw-.(%r13) # load disabled wait psw -# - .align 8 -.Ldw: .long 0x000a0000,0x00000000 -.Linittu: .long init_thread_union -.Lstart: .long start_kernel -.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S new file mode 100644 index 000000000000..2d3b089bfb83 --- /dev/null +++ b/arch/s390/kernel/head31.S @@ -0,0 +1,336 @@ +/* + * arch/s390/kernel/head31.S + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> + * + */ + +# +# startup-code at 0x10000, running in absolute addressing mode +# this is called either by the ipl loader or directly by PSW restart +# or linload or SALIPL +# + .org 0x10000 +startup:basr %r13,0 # get base +.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) + basr %r14, %r1 + lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers + la %r12,_pstart-.LPG1(%r13) # pointer to parameter area + # move IPL device to lowcore + mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) + +# +# clear bss memory +# + l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss + l %r3,.Lbss_end-.LPG1(%r13) # end of bss + sr %r3,%r2 # length of bss + sr %r4,%r4 + sr %r5,%r5 # set src,length and pad to zero + sr %r0,%r0 + mvcle %r2,%r4,0 # clear mem + jo .-4 # branch back, if not finish + + l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word +.Lservicecall: + stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts + + stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 + la %r1,0x200 # set bit 22 + o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 + st %r1,.Lcr-.LPG1(%r13) + lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 + + mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw + la %r1, .Lsclph-.LPG1(%r13) + a %r1,__LC_EXT_NEW_PSW+4 # set handler + st %r1,__LC_EXT_NEW_PSW+4 + + la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff + la %r1, .Lsccb-PARMAREA(%r4) # our sccb + .insn rre,0xb2200000,%r2,%r1 # service call + ipm %r1 + srl %r1,28 # get cc code + xr %r3, %r3 + chi %r1,3 + be .Lfchunk-.LPG1(%r13) # leave + chi %r1,2 + be .Lservicecall-.LPG1(%r13) + lpsw .Lwaitsclp-.LPG1(%r13) +.Lsclph: + lh %r1,.Lsccbr-PARMAREA(%r4) + chi %r1,0x10 # 0x0010 is the sucess code + je .Lprocsccb # let's process the sccb + chi %r1,0x1f0 + bne .Lfchunk-.LPG1(%r13) # unhandled error code + c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced + bne .Lfchunk-.LPG1(%r13) # if no, give up + l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP + b .Lservicecall-.LPG1(%r13) +.Lprocsccb: + lhi %r1,0 + icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 + jnz .Lscnd + lhi %r1,0x800 # otherwise report 2GB +.Lscnd: + lhi %r3,0x800 # limit reported memory size to 2GB + cr %r1,%r3 + jl .Lno2gb + lr %r1,%r3 +.Lno2gb: + xr %r3,%r3 # same logic + ic %r3,.Lscpa1-PARMAREA(%r4) + chi %r3,0x00 + jne .Lcompmem + l %r3,.Lscpa2-PARMAREA(%r13) +.Lcompmem: + mr %r2,%r1 # mem in MB on 128-bit + l %r1,.Lonemb-.LPG1(%r13) + mr %r2,%r1 # mem size in bytes in %r3 + b .Lfchunk-.LPG1(%r13) + + .align 4 +.Lget_ipl_device_addr: + .long .Lget_ipl_device +.Lpmask: + .byte 0 +.align 8 +.Lpcext:.long 0x00080000,0x80000000 +.Lcr: + .long 0x00 # place holder for cr0 +.Lwaitsclp: + .long 0x010a0000,0x80000000 + .Lsclph +.Lrcp: + .int 0x00120001 # Read SCP forced code +.Lrcp2: + .int 0x00020001 # Read SCP code +.Lonemb: + .int 0x100000 +.Lfchunk: + +# +# find memory chunks. +# + lr %r9,%r3 # end of mem + mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) + la %r1,1 # test in increments of 128KB + sll %r1,17 + l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array + slr %r4,%r4 # set start of chunk to zero + slr %r5,%r5 # set end of chunk to zero + slr %r6,%r6 # set access code to zero + la %r10, MEMORY_CHUNKS # number of chunks +.Lloop: + tprot 0(%r5),0 # test protection of first byte + ipm %r7 + srl %r7,28 + clr %r6,%r7 # compare cc with last access code + be .Lsame-.LPG1(%r13) + b .Lchkmem-.LPG1(%r13) +.Lsame: + ar %r5,%r1 # add 128KB to end of chunk + bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop +.Lchkmem: # > 2GB or tprot got a program check + clr %r4,%r5 # chunk size > 0? + be .Lchkloop-.LPG1(%r13) + st %r4,0(%r3) # store start address of chunk + lr %r0,%r5 + slr %r0,%r4 + st %r0,4(%r3) # store size of chunk + st %r6,8(%r3) # store type of chunk + la %r3,12(%r3) + l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size + st %r5,0(%r4) # store last end to memory size + ahi %r10,-1 # update chunk number +.Lchkloop: + lr %r6,%r7 # set access code to last cc + # we got an exception or we're starting a new + # chunk , we must check if we should + # still try to find valid memory (if we detected + # the amount of available storage), and if we + # have chunks left + xr %r0,%r0 + clr %r0,%r9 # did we detect memory? + je .Ldonemem # if not, leave + chi %r10,0 # do we have chunks left? + je .Ldonemem + alr %r5,%r1 # add 128KB to end of chunk + lr %r4,%r5 # potential new chunk + clr %r5,%r9 # should we go on? + jl .Lloop +.Ldonemem: + l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags +# +# find out if we are running under VM +# + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running under VM ? + bno .Lnovm-.LPG1(%r13) + oi 3(%r12),1 # set VM flag +.Lnovm: + lh %r0,__LC_CPUID+4 # get cpu version + chi %r0,0x7490 # running on a P/390 ? + bne .Lnop390-.LPG1(%r13) + oi 3(%r12),4 # set P/390 flag +.Lnop390: + +# +# find out if we have an IEEE fpu +# + mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) + efpc %r0,0 # test IEEE extract fpc instruction + oi 3(%r12),2 # set IEEE fpu flag +.Lchkfpu: + +# +# find out if we have the CSP instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) + la %r0,0 + lr %r1,%r0 + la %r2,4 + csp %r0,%r2 # Test CSP instruction + oi 3(%r12),8 # set CSP flag +.Lchkcsp: + +# +# find out if we have the MVPG instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) + sr %r0,%r0 + la %r1,0 + la %r2,0 + mvpg %r1,%r2 # Test CSP instruction + oi 3(%r12),16 # set MVPG flag +.Lchkmvpg: + +# +# find out if we have the IDTE instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) + .long 0xb2b10000 # store facility list + tm 0xc8,0x08 # check bit for clearing-by-ASCE + bno .Lchkidte-.LPG1(%r13) + lhi %r1,2094 + lhi %r2,0 + .long 0xb98e2001 + oi 3(%r12),0x80 # set IDTE flag +.Lchkidte: + + lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, + # virtual and never return ... + .align 8 +.Lentry:.long 0x00080000,0x80000000 + _stext +.Lctl: .long 0x04b50002 # cr0: various things + .long 0 # cr1: primary space segment table + .long .Lduct # cr2: dispatchable unit control table + .long 0 # cr3: instruction authorization + .long 0 # cr4: instruction authorization + .long 0xffffffff # cr5: primary-aste origin + .long 0 # cr6: I/O interrupts + .long 0 # cr7: secondary space segment table + .long 0 # cr8: access registers translation + .long 0 # cr9: tracing off + .long 0 # cr10: tracing off + .long 0 # cr11: tracing off + .long 0 # cr12: tracing off + .long 0 # cr13: home space segment table + .long 0xc0000000 # cr14: machine check handling off + .long 0 # cr15: linkage stack operations +.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem +.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu +.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp +.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg +.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte +.Lmemsize:.long memory_size +.Lmchunk:.long memory_chunk +.Lmflags:.long machine_flags +.Lbss_bgn: .long __bss_start +.Lbss_end: .long _end + + .org PARMAREA-64 +.Lduct: .long 0,0,0,0,0,0,0,0 + .long 0,0,0,0,0,0,0,0 + +# +# params at 10400 (setup.h) +# + .org PARMAREA + .global _pstart +_pstart: + .long 0,0 # IPL_DEVICE + .long 0,RAMDISK_ORIGIN # INITRD_START + .long 0,RAMDISK_SIZE # INITRD_SIZE + + .org COMMAND_LINE + .byte "root=/dev/ram0 ro" + .byte 0 + .org 0x11000 +.Lsccb: + .hword 0x1000 # length, one page + .byte 0x00,0x00,0x00 + .byte 0x80 # variable response bit set +.Lsccbr: + .hword 0x00 # response code +.Lscpincr1: + .hword 0x00 +.Lscpa1: + .byte 0x00 + .fill 89,1,0 +.Lscpa2: + .int 0x00 +.Lscpincr2: + .quad 0x00 + .fill 3984,1,0 + .org 0x12000 + .global _pend +_pend: + + GET_IPL_DEVICE + +#ifdef CONFIG_SHARED_KERNEL + .org 0x100000 +#endif + +# +# startup-code, running in virtual mode +# + .globl _stext +_stext: basr %r13,0 # get base +.LPG3: +# +# Setup stack +# + l %r15,.Linittu-.LPG3(%r13) + mvc __LC_CURRENT(4),__TI_task(%r15) + ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE + st %r15,__LC_KERNEL_STACK # set end of kernel stack + ahi %r15,-96 + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain + +# check control registers + stctl %c0,%c15,0(%r15) + oi 2(%r15),0x40 # enable sigp emergency signal + oi 0(%r15),0x10 # switch on low address protection + lctl %c0,%c15,0(%r15) + +# + lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess + l %r14,.Lstart-.LPG3(%r13) + basr %r14,%r14 # call start_kernel +# +# We returned from start_kernel ?!? PANIK +# + basr %r13,0 + lpsw .Ldw-.(%r13) # load disabled wait psw +# + .align 8 +.Ldw: .long 0x000a0000,0x00000000 +.Linittu:.long init_thread_union +.Lstart:.long start_kernel +.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 193aafa72f54..f08c06f45d5c 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -1,482 +1,17 @@ /* - * arch/s390/kernel/head.S + * arch/s390/kernel/head64.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999,2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> * - * There are 5 different IPL methods - * 1) load the image directly into ram at address 0 and do an PSW restart - * 2) linload will load the image from address 0x10000 to memory 0x10000 - * and start the code thru LPSW 0x0008000080010000 (VM only, deprecated) - * 3) generate the tape ipl header, store the generated image on a tape - * and ipl from it - * In case of SL tape you need to IPL 5 times to get past VOL1 etc - * 4) generate the vm reader ipl header, move the generated image to the - * VM reader (use option NOH!) and do a ipl from reader (VM only) - * 5) direct call of start by the SALIPL loader - * We use the cpuid to distinguish between VM and native ipl - * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 <rvdheij@iae.nl> - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - */ -#include <linux/config.h> -#include <asm/setup.h> -#include <asm/lowcore.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/page.h> - -#ifndef CONFIG_IPL - .org 0 - .long 0x00080000,0x80000000+startup # Just a restart PSW -#else -#ifdef CONFIG_IPL_TAPE -#define IPL_BS 1024 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x27000000,0x60000001 # by ipl to addresses 0-23. - .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). - .long 0x00000000,0x00000000 # external old psw - .long 0x00000000,0x00000000 # svc old psw - .long 0x00000000,0x00000000 # program check old psw - .long 0x00000000,0x00000000 # machine check old psw - .long 0x00000000,0x00000000 # io old psw - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x000a0000,0x00000058 # external new psw - .long 0x000a0000,0x00000060 # svc new psw - .long 0x000a0000,0x00000068 # program check new psw - .long 0x000a0000,0x00000070 # machine check new psw - .long 0x00080000,0x80000000+.Lioint # io new psw - - .org 0x100 -# -# subroutine for loading from tape -# Paramters: -# R1 = device number -# R2 = load address -.Lloader: - st %r14,.Lldret - la %r3,.Lorbread # r3 = address of orb - la %r5,.Lirb # r5 = address of irb - st %r2,.Lccwread+4 # initialize CCW data addresses - lctl %c6,%c6,.Lcr6 - slr %r2,%r2 -.Lldlp: - la %r6,3 # 3 retries -.Lssch: - ssch 0(%r3) # load chunk of IPL_BS bytes - bnz .Llderr -.Lw4end: - bas %r14,.Lwait4io - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lrecov - slr %r7,%r7 - icm %r7,3,10(%r5) # get residual count - lcr %r7,%r7 - la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read - ar %r2,%r7 # add to total size - tm 8(%r5),0x01 # found a tape mark ? - bnz .Ldone - l %r0,.Lccwread+4 # update CCW data addresses - ar %r0,%r7 - st %r0,.Lccwread+4 - b .Lldlp -.Ldone: - l %r14,.Lldret - br %r14 # r2 contains the total size -.Lrecov: - bas %r14,.Lsense # do the sensing - bct %r6,.Lssch # dec. retry count & branch - b .Llderr -# -# Sense subroutine -# -.Lsense: - st %r14,.Lsnsret - la %r7,.Lorbsense - ssch 0(%r7) # start sense command - bnz .Llderr - bas %r14,.Lwait4io - l %r14,.Lsnsret - tm 8(%r5),0x82 # do we have a problem ? - bnz .Llderr - br %r14 -# -# Wait for interrupt subroutine -# -.Lwait4io: - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4io - tsch 0(%r5) - slr %r0,%r0 - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lwtexit - tm 8(%r5),0x04 # got device end ? - bz .Lwait4io -.Lwtexit: - br %r14 -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorbread: - .long 0x00000000,0x0080ff00,.Lccwread - .align 8 -.Lorbsense: - .long 0x00000000,0x0080ff00,.Lccwsense - .align 8 -.Lccwread: - .long 0x02200000+IPL_BS,0x00000000 -.Lccwsense: - .long 0x04200001,0x00000000 -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lldret:.long 0 -.Lsnsret: .long 0 -#endif /* CONFIG_IPL_TAPE */ - -#ifdef CONFIG_IPL_VM -#define IPL_BS 0x730 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x02000018,0x60000050 # by ipl to addresses 0-23. - .long 0x02000068,0x60000050 # (a PSW and two CCWs). - .fill 80-24,1,0x40 # bytes 24-79 are discarded !! - .long 0x020000f0,0x60000050 # The next 160 byte are loaded - .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 - .long 0x02000190,0x60000050 # They form the continuation - .long 0x020001e0,0x60000050 # of the CCW program started - .long 0x02000230,0x60000050 # by ipl and load the range - .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image - .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 - .long 0x02000320,0x60000050 # in memory. At the end of - .long 0x02000370,0x60000050 # the channel program the PSW - .long 0x020003c0,0x60000050 # at location 0 is loaded. - .long 0x02000410,0x60000050 # Initial processing starts - .long 0x02000460,0x60000050 # at 0xf0 = iplstart. - .long 0x020004b0,0x60000050 - .long 0x02000500,0x60000050 - .long 0x02000550,0x60000050 - .long 0x020005a0,0x60000050 - .long 0x020005f0,0x60000050 - .long 0x02000640,0x60000050 - .long 0x02000690,0x60000050 - .long 0x020006e0,0x20000050 - - .org 0xf0 -# -# subroutine for loading cards from the reader -# -.Lloader: - la %r3,.Lorb # r2 = address of orb into r2 - la %r5,.Lirb # r4 = address of irb - la %r6,.Lccws - la %r7,20 -.Linit: - st %r2,4(%r6) # initialize CCW data addresses - la %r2,0x50(%r2) - la %r6,8(%r6) - bct 7,.Linit - - lctl %c6,%c6,.Lcr6 # set IO subclass mask - slr %r2,%r2 -.Lldlp: - ssch 0(%r3) # load chunk of 1600 bytes - bnz .Llderr -.Lwait4irq: - mvc 0x78(8),.Lnewpsw # set up IO interrupt psw - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4irq - tsch 0(%r5) - - slr %r0,%r0 - ic %r0,8(%r5) # get device status - chi %r0,8 # channel end ? - be .Lcont - chi %r0,12 # channel end + device end ? - be .Lcont - - l %r0,4(%r5) - s %r0,8(%r3) # r0/8 = number of ccws executed - mhi %r0,10 # *10 = number of bytes in ccws - lh %r3,10(%r5) # get residual count - sr %r0,%r3 # #ccws*80-residual=#bytes read - ar %r2,%r0 - - br %r14 # r2 contains the total size - -.Lcont: - ahi %r2,0x640 # add 0x640 to total size - la %r6,.Lccws - la %r7,20 -.Lincr: - l %r0,4(%r6) # update CCW data addresses - ahi %r0,0x640 - st %r0,4(%r6) - ahi %r6,8 - bct 7,.Lincr - - b .Lldlp -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorb: .long 0x00000000,0x0080ff00,.Lccws -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 -.Lloadp:.long 0,0 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lnewpsw: - .long 0x00080000,0x80000000+.Lioint -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - - .align 8 -.Lccws: .rept 19 - .long 0x02600050,0x00000000 - .endr - .long 0x02200050,0x00000000 -#endif /* CONFIG_IPL_VM */ - -iplstart: - lh %r1,0xb8 # test if subchannel number - bct %r1,.Lnoload # is valid - l %r1,0xb8 # load ipl subchannel number - la %r2,IPL_BS # load start address - bas %r14,.Lloader # load rest of ipl image - larl %r12,_pstart # pointer to parameter area - st %r1,IPL_DEVICE+4-PARMAREA(%r12) # store ipl device number - -# -# load parameter file from ipl device # -.Lagain1: - l %r2,INITRD_START+4-PARMAREA(%r12)# use ramdisk location as temp - bas %r14,.Lloader # load parameter file - ltr %r2,%r2 # got anything ? - bz .Lnopf - chi %r2,895 - bnh .Lnotrunc - la %r2,895 -.Lnotrunc: - l %r4,INITRD_START+4-PARMAREA(%r12) - clc 0(3,%r4),.L_hdr # if it is HDRx - bz .Lagain1 # skip dataset header - clc 0(3,%r4),.L_eof # if it is EOFx - bz .Lagain1 # skip dateset trailer - la %r5,0(%r4,%r2) - lr %r3,%r2 -.Lidebc: - tm 0(%r5),0x80 # high order bit set ? - bo .Ldocv # yes -> convert from EBCDIC - ahi %r5,-1 - bct %r3,.Lidebc - b .Lnocv -.Ldocv: - l %r3,.Lcvtab - tr 0(256,%r4),0(%r3) # convert parameters to ascii - tr 256(256,%r4),0(%r3) - tr 512(256,%r4),0(%r3) - tr 768(122,%r4),0(%r3) -.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line - mvc 0(256,%r3),0(%r4) - mvc 256(256,%r3),256(%r4) - mvc 512(256,%r3),512(%r4) - mvc 768(122,%r3),768(%r4) - slr %r0,%r0 - b .Lcntlp -.Ldelspc: - ic %r0,0(%r2,%r3) - chi %r0,0x20 # is it a space ? - be .Lcntlp - ahi %r2,1 - b .Leolp -.Lcntlp: - brct %r2,.Ldelspc -.Leolp: - slr %r0,%r0 - stc %r0,0(%r2,%r3) # terminate buffer -.Lnopf: - -# -# load ramdisk from ipl device -# -.Lagain2: - l %r2,INITRD_START+4-PARMAREA(%r12)# load adr. of ramdisk - bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE+4-PARMAREA(%r12) # store size of ramdisk - ltr %r2,%r2 - bnz .Lrdcont - st %r2,INITRD_START+4-PARMAREA(%r12)# no ramdisk found, null it -.Lrdcont: - l %r2,INITRD_START+4-PARMAREA(%r12) - clc 0(3,%r2),.L_hdr # skip HDRx and EOFx - bz .Lagain2 - clc 0(3,%r2),.L_eof - bz .Lagain2 - -#ifdef CONFIG_IPL_VM -# -# reset files in VM reader -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running VM ? - bno .Lnoreset - la %r2,.Lreset - lhi %r3,26 - diag %r2,%r3,8 - la %r5,.Lirb - stsch 0(%r5) # check if irq is pending - tm 30(%r5),0x0f # by verifying if any of the - bnz .Lwaitforirq # activity or status control - tm 31(%r5),0xff # bits is set in the schib - bz .Lnoreset -.Lwaitforirq: - mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw -.Lwaitrdrirq: - lpsw .Lrdrwaitpsw -.Lrdrint: - c %r1,0xb8 # compare subchannel number - bne .Lwaitrdrirq - la %r5,.Lirb - tsch 0(%r5) -.Lnoreset: - b .Lnoload - - .align 8 -.Lrdrnewpsw: - .long 0x00080000,0x80000000+.Lrdrint -.Lrdrwaitpsw: - .long 0x020a0000,0x80000000+.Lrdrint -#endif - -# -# everything loaded, go for it -# -.Lnoload: - l %r1,.Lstartup - br %r1 - -.Lstartup: .long startup -.Lcvtab:.long _ebcasc # ebcdic to ascii table -.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 - .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 - .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" -.L_eof: .long 0xc5d6c600 /* C'EOF' */ -.L_hdr: .long 0xc8c4d900 /* C'HDR' */ -#endif /* CONFIG_IPL */ - -# -# SALIPL loader support. Based on a patch by Rob van der Heij. -# This entry point is called directly from the SALIPL loader and -# doesn't need a builtin ipl record. -# - .org 0x800 - .globl start -start: - stm %r0,%r15,0x07b0 # store registers - basr %r12,%r0 -.base: - l %r11,.parm - l %r8,.cmd # pointer to command buffer - - ltr %r9,%r9 # do we have SALIPL parameters? - bp .sk8x8 - - mvc 0(64,%r8),0x00b0 # copy saved registers - xc 64(240-64,%r8),0(%r8) # remainder of buffer - tr 0(64,%r8),.lowcase - b .gotr -.sk8x8: - mvc 0(240,%r8),0(%r9) # copy iplparms into buffer -.gotr: - l %r10,.tbl # EBCDIC to ASCII table - tr 0(240,%r8),0(%r10) - stidp __LC_CPUID # Are we running on VM maybe - cli __LC_CPUID,0xff - bnz .test - .long 0x83300060 # diag 3,0,x'0060' - storage size - b .done -.test: - mvc 0x68(8),.pgmnw # set up pgm check handler - l %r2,.fourmeg - lr %r3,%r2 - bctr %r3,%r0 # 4M-1 -.loop: iske %r0,%r3 - ar %r3,%r2 -.pgmx: - sr %r3,%r2 - la %r3,1(%r3) -.done: - l %r1,.memsize - st %r3,4(%r1) - slr %r0,%r0 - st %r0,INITRD_SIZE+4-PARMAREA(%r11) - st %r0,INITRD_START+4-PARMAREA(%r11) - j startup # continue with startup -.tbl: .long _ebcasc # translate table -.cmd: .long COMMAND_LINE # address of command line buffer -.parm: .long PARMAREA -.fourmeg: .long 0x00400000 # 4M -.pgmnw: .long 0x00080000,.pgmx -.memsize: .long memory_size -.lowcase: - .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 - .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f - .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 - .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f - .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 - .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f - .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 - .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f - .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 - .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f - .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 - .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f - .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 - .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f - .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 - .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f - - .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 - .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f - .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 - .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f - .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 - .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf - .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 - .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf - .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg - .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi - .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop - .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr - .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx - .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz - .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 - .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff - -# -# startup-code at 0x10000, running in real mode +# startup-code at 0x10000, running in absolute addressing mode # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # @@ -530,7 +65,7 @@ startup:basr %r13,0 # get base be .Lfchunk-.LPG1(%r13) # leave chi %r1,2 be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) + lpswe .Lwaitsclp-.LPG1(%r13) .Lsclph: lh %r1,.Lsccbr-PARMAREA(%r4) chi %r1,0x10 # 0x0010 is the sucess code @@ -567,8 +102,7 @@ startup:basr %r13,0 # get base .Lcr: .quad 0x00 # place holder for cr0 .Lwaitsclp: - .long 0x020A0000 - .quad .Lsclph + .quad 0x0102000180000000,.Lsclph .Lrcp: .int 0x00120001 # Read SCP forced code .Lrcp2: @@ -751,62 +285,7 @@ _pstart: .global _pend _pend: -.Lget_ipl_device: - basr %r12,0 -.LPG2: l %r1,0xb8 # get sid - sll %r1,15 # test if subchannel is enabled - srl %r1,31 - ltr %r1,%r1 - bz 0(%r14) # subchannel disabled - l %r1,0xb8 - la %r5,.Lipl_schib-.LPG2(%r12) - stsch 0(%r5) # get schib of subchannel - bnz 0(%r14) # schib not available - tm 5(%r5),0x01 # devno valid? - bno 0(%r14) - la %r6,ipl_parameter_flags-.LPG2(%r12) - oi 3(%r6),0x01 # set flag - la %r2,ipl_devno-.LPG2(%r12) - mvc 0(2,%r2),6(%r5) # store devno - tm 4(%r5),0x80 # qdio capable device? - bno 0(%r14) - oi 3(%r6),0x02 # set flag - - # copy ipl parameters - - lhi %r0,4096 - l %r2,20(%r0) # get address of parameter list - lhi %r3,IPL_PARMBLOCK_ORIGIN - st %r3,20(%r0) - lhi %r4,1 - cr %r2,%r3 # start parameters < destination ? - jl 0f - lhi %r1,1 # copy direction is upwards - j 1f -0: lhi %r1,-1 # copy direction is downwards - ar %r2,%r0 - ar %r3,%r0 - ar %r2,%r1 - ar %r3,%r1 -1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters - ar %r3,%r1 - ar %r2,%r1 - sr %r0,%r4 - jne 1b - b 0(%r14) - - .align 4 -.Lipl_schib: - .rept 13 - .long 0 - .endr - - .globl ipl_parameter_flags -ipl_parameter_flags: - .long 0 - .globl ipl_devno -ipl_devno: - .word 0 + GET_IPL_DEVICE #ifdef CONFIG_SHARED_KERNEL .org 0x100000 diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 9f3dff6c0b72..78b64fe5e7c2 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -99,15 +99,15 @@ void default_idle(void) { int cpu, rc; + /* CPU is going idle. */ + cpu = smp_processor_id(); + local_irq_disable(); - if (need_resched()) { + if (need_resched()) { local_irq_enable(); - schedule(); - return; - } + return; + } - /* CPU is going idle. */ - cpu = smp_processor_id(); rc = notifier_call_chain(&idle_chain, CPU_IDLE, (void *)(long) cpu); if (rc != NOTIFY_OK && rc != NOTIFY_DONE) BUG(); @@ -120,7 +120,7 @@ void default_idle(void) __ctl_set_bit(8, 15); #ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) + if (cpu_is_offline(cpu)) cpu_die(); #endif @@ -139,8 +139,14 @@ void default_idle(void) void cpu_idle(void) { - for (;;) - default_idle(); + for (;;) { + while (!need_resched()) + default_idle(); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } void show_regs(struct pt_regs *regs) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index e13c87b446b2..5856b3fda6bf 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -533,6 +533,7 @@ int __devinit start_secondary(void *cpuvoid) { /* Setup the cpu */ cpu_init(); + preempt_disable(); /* init per CPU timer */ init_cpu_timer(); #ifdef CONFIG_VIRT_TIMER diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 9a1d95894f3d..c36353e8c140 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -237,6 +237,8 @@ int sysctl_hz_timer = 1; */ static inline void stop_hz_timer(void) { + unsigned long flags; + unsigned long seq, next; __u64 timer, todval; if (sysctl_hz_timer != 0) @@ -257,7 +259,11 @@ static inline void stop_hz_timer(void) * This cpu is going really idle. Set up the clock comparator * for the next event. */ - timer = (__u64) (next_timer_interrupt() - jiffies) + jiffies_64; + next = next_timer_interrupt(); + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + timer = (__u64)(next - jiffies) + jiffies_64; + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); todval = -1ULL; /* Be careful about overflows. */ if (timer < (-1ULL / CLK_TICKS_PER_JIFFY)) { diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 6b8703ec2ae6..c5bd36fae56b 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -57,7 +57,6 @@ int sysctl_userprocess_debug = 0; extern pgm_check_handler_t do_protection_exception; extern pgm_check_handler_t do_dat_exception; -extern pgm_check_handler_t do_pseudo_page_fault; #ifdef CONFIG_PFAULT extern int pfault_init(void); extern void pfault_fini(void); @@ -676,20 +675,6 @@ asmlinkage void kernel_stack_overflow(struct pt_regs * regs) panic("Corrupt kernel stack, can't continue."); } -#ifndef CONFIG_ARCH_S390X -static int -pagex_reboot_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - if (MACHINE_IS_VM) - cpcmd("SET PAGEX OFF", NULL, 0, NULL); - return NOTIFY_DONE; -} - -static struct notifier_block pagex_reboot_notifier = { - .notifier_call = &pagex_reboot_event, -}; -#endif - /* init is done in lowcore.S and head.S */ void __init trap_init(void) @@ -717,9 +702,7 @@ void __init trap_init(void) pgm_check_table[0x11] = &do_dat_exception; pgm_check_table[0x12] = &translation_exception; pgm_check_table[0x13] = &special_op_exception; -#ifndef CONFIG_ARCH_S390X - pgm_check_table[0x14] = &do_pseudo_page_fault; -#else /* CONFIG_ARCH_S390X */ +#ifdef CONFIG_ARCH_S390X pgm_check_table[0x38] = &do_dat_exception; pgm_check_table[0x39] = &do_dat_exception; pgm_check_table[0x3A] = &do_dat_exception; @@ -731,12 +714,10 @@ void __init trap_init(void) pgm_check_table[0x40] = &do_monitor_call; if (MACHINE_IS_VM) { +#ifdef CONFIG_PFAULT /* - * First try to get pfault pseudo page faults going. - * If this isn't available turn on pagex page faults. + * Try to get pfault pseudo page faults going. */ -#ifdef CONFIG_PFAULT - /* request the 0x2603 external interrupt */ if (register_early_external_interrupt(0x2603, pfault_interrupt, &ext_int_pfault) != 0) panic("Couldn't request external interrupt 0x2603"); @@ -748,9 +729,5 @@ void __init trap_init(void) unregister_early_external_interrupt(0x2603, pfault_interrupt, &ext_int_pfault); #endif -#ifndef CONFIG_ARCH_S390X - register_reboot_notifier(&pagex_reboot_notifier); - cpcmd("SET PAGEX ON", NULL, 0, NULL); -#endif } } diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index c5348108ca3c..506a33b51e4f 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -234,8 +234,8 @@ query_segment_type (struct dcss_segment *seg) rc = 0; out_free: - if (qin) kfree(qin); - if (qout) kfree(qout); + kfree(qin); + kfree(qout); return rc; } @@ -394,7 +394,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long segtype_string[seg->vm_segtype]); goto out; out_free: - kfree (seg); + kfree(seg); out: return rc; } @@ -505,7 +505,7 @@ segment_modify_shared (char *name, int do_nonshared) list_del(&seg->list); dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); - kfree (seg); + kfree(seg); out_unlock: spin_unlock(&dcss_lock); return rc; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 856a971759b1..fb2607c369ed 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -160,7 +160,7 @@ static void do_sigsegv(struct pt_regs *regs, unsigned long error_code, * 11 Page translation -> Not present (nullification) * 3b Region third trans. -> Not present (nullification) */ -extern inline void +static inline void do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection) { struct task_struct *tsk; @@ -352,115 +352,6 @@ void do_dat_exception(struct pt_regs *regs, unsigned long error_code) do_exception(regs, error_code & 0xff, 0); } -#ifndef CONFIG_ARCH_S390X - -typedef struct _pseudo_wait_t { - struct _pseudo_wait_t *next; - wait_queue_head_t queue; - unsigned long address; - int resolved; -} pseudo_wait_t; - -static pseudo_wait_t *pseudo_lock_queue = NULL; -static spinlock_t pseudo_wait_spinlock; /* spinlock to protect lock queue */ - -/* - * This routine handles 'pagex' pseudo page faults. - */ -asmlinkage void -do_pseudo_page_fault(struct pt_regs *regs, unsigned long error_code) -{ - pseudo_wait_t wait_struct; - pseudo_wait_t *ptr, *last, *next; - unsigned long address; - - /* - * get the failing address - * more specific the segment and page table portion of - * the address - */ - address = S390_lowcore.trans_exc_code & 0xfffff000; - - if (address & 0x80000000) { - /* high bit set -> a page has been swapped in by VM */ - address &= 0x7fffffff; - spin_lock(&pseudo_wait_spinlock); - last = NULL; - ptr = pseudo_lock_queue; - while (ptr != NULL) { - next = ptr->next; - if (address == ptr->address) { - /* - * This is one of the processes waiting - * for the page. Unchain from the queue. - * There can be more than one process - * waiting for the same page. VM presents - * an initial and a completion interrupt for - * every process that tries to access a - * page swapped out by VM. - */ - if (last == NULL) - pseudo_lock_queue = next; - else - last->next = next; - /* now wake up the process */ - ptr->resolved = 1; - wake_up(&ptr->queue); - } else - last = ptr; - ptr = next; - } - spin_unlock(&pseudo_wait_spinlock); - } else { - /* Pseudo page faults in kernel mode is a bad idea */ - if (!(regs->psw.mask & PSW_MASK_PSTATE)) { - /* - * VM presents pseudo page faults if the interrupted - * state was not disabled for interrupts. So we can - * get pseudo page fault interrupts while running - * in kernel mode. We simply access the page here - * while we are running disabled. VM will then swap - * in the page synchronously. - */ - if (check_user_space(regs, error_code) == 0) - /* dereference a virtual kernel address */ - __asm__ __volatile__ ( - " ic 0,0(%0)" - : : "a" (address) : "0"); - else - /* dereference a virtual user address */ - __asm__ __volatile__ ( - " la 2,0(%0)\n" - " sacf 512\n" - " ic 2,0(2)\n" - "0:sacf 0\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 0b,0b\n" - ".previous" - : : "a" (address) : "2" ); - - return; - } - /* initialize and add element to pseudo_lock_queue */ - init_waitqueue_head (&wait_struct.queue); - wait_struct.address = address; - wait_struct.resolved = 0; - spin_lock(&pseudo_wait_spinlock); - wait_struct.next = pseudo_lock_queue; - pseudo_lock_queue = &wait_struct; - spin_unlock(&pseudo_wait_spinlock); - /* - * The instruction that caused the program check will - * be repeated. Don't signal single step via SIGTRAP. - */ - clear_tsk_thread_flag(current, TIF_SINGLE_STEP); - /* go to sleep */ - wait_event(wait_struct.queue, wait_struct.resolved); - } -} -#endif /* CONFIG_ARCH_S390X */ - #ifdef CONFIG_PFAULT /* * 'pfault' pseudo page faults routines. @@ -508,7 +399,7 @@ int pfault_init(void) " .quad 0b,1b\n" #endif /* CONFIG_ARCH_S390X */ ".previous" - : "=d" (rc) : "a" (&refbk) : "cc" ); + : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc" ); __ctl_set_bit(0, 9); return rc; } @@ -532,7 +423,7 @@ void pfault_fini(void) " .quad 0b,0b\n" #endif /* CONFIG_ARCH_S390X */ ".previous" - : : "a" (&refbk) : "cc" ); + : : "a" (&refbk), "m" (refbk) : "cc" ); } asmlinkage void diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3e804c736e64..64f5ae0ff96d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -490,16 +490,6 @@ config CPU_SUBTYPE_ST40 depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1 default y -config ARCH_DISCONTIGMEM_ENABLE - bool - depends on SH_HP690 - default y - help - Say Y to upport efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See <file:Documentation/vm/numa> for more. - source "mm/Kconfig" config ZERO_PAGE_OFFSET @@ -770,24 +760,6 @@ source "fs/Kconfig.binfmt" endmenu -menu "SH initrd options" - depends on BLK_DEV_INITRD - -config EMBEDDED_RAMDISK - bool "Embed root filesystem ramdisk into the kernel" - -config EMBEDDED_RAMDISK_IMAGE - string "Filename of gziped ramdisk image" - depends on EMBEDDED_RAMDISK - default "ramdisk.gz" - help - This is the filename of the ramdisk image to be built into the - kernel. Relative pathnames are relative to arch/sh/ramdisk/. - The ramdisk image is not part of the kernel distribution; you must - provide one yourself. - -endmenu - source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4a3049080b41..67192d6b00d8 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -60,14 +60,6 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) core-y += arch/sh/kernel/ arch/sh/mm/ -# -# ramdisk/initrd support -# You need a compressed ramdisk image, named -# CONFIG_EMBEDDED_RAMDISK_IMAGE. Relative pathnames -# are relative to arch/sh/ramdisk/. -# -core-$(CONFIG_EMBEDDED_RAMDISK) += arch/sh/ramdisk/ - # Boards machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index bd6726cde398..338c3729d270 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -2,6 +2,7 @@ # Makefile for the Linux SuperH-specific device drivers. # -obj-$(CONFIG_PCI) += pci/ -obj-$(CONFIG_SH_DMA) += dma/ +obj-$(CONFIG_PCI) += pci/ +obj-$(CONFIG_SH_DMA) += dma/ +obj-$(CONFIG_SUPERHYWAY) += superhyway/ diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile new file mode 100644 index 000000000000..5b8e0c7ca3a5 --- /dev/null +++ b/arch/sh/drivers/superhyway/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SuperHyway specific kernel interface routines under Linux. +# + +obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += ops-sh4-202.o + diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c new file mode 100644 index 000000000000..a55c98a9052b --- /dev/null +++ b/arch/sh/drivers/superhyway/ops-sh4-202.c @@ -0,0 +1,171 @@ +/* + * arch/sh/drivers/superhyway/ops-sh4-202.c + * + * SuperHyway bus support for SH4-202 + * + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU + * General Public License. See the file "COPYING" in the main + * directory of this archive for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/superhyway.h> +#include <linux/string.h> +#include <asm/addrspace.h> +#include <asm/io.h> + +#define PHYS_EMI_CBLOCK P4SEGADDR(0x1ec00000) +#define PHYS_EMI_DBLOCK P4SEGADDR(0x08000000) +#define PHYS_FEMI_CBLOCK P4SEGADDR(0x1f800000) +#define PHYS_FEMI_DBLOCK P4SEGADDR(0x00000000) + +#define PHYS_EPBR_BLOCK P4SEGADDR(0x1de00000) +#define PHYS_DMAC_BLOCK P4SEGADDR(0x1fa00000) +#define PHYS_PBR_BLOCK P4SEGADDR(0x1fc00000) + +static struct resource emi_resources[] = { + [0] = { + .start = PHYS_EMI_CBLOCK, + .end = PHYS_EMI_CBLOCK + 0x00300000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_EMI_DBLOCK, + .end = PHYS_EMI_DBLOCK + 0x08000000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device emi_device = { + .name = "emi", + .num_resources = ARRAY_SIZE(emi_resources), + .resource = emi_resources, +}; + +static struct resource femi_resources[] = { + [0] = { + .start = PHYS_FEMI_CBLOCK, + .end = PHYS_FEMI_CBLOCK + 0x00100000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_FEMI_DBLOCK, + .end = PHYS_FEMI_DBLOCK + 0x08000000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device femi_device = { + .name = "femi", + .num_resources = ARRAY_SIZE(femi_resources), + .resource = femi_resources, +}; + +static struct resource epbr_resources[] = { + [0] = { + .start = P4SEGADDR(0x1e7ffff8), + .end = P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_EPBR_BLOCK, + .end = PHYS_EPBR_BLOCK + 0x00a00000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device epbr_device = { + .name = "epbr", + .num_resources = ARRAY_SIZE(epbr_resources), + .resource = epbr_resources, +}; + +static struct resource dmac_resource = { + .start = PHYS_DMAC_BLOCK, + .end = PHYS_DMAC_BLOCK + 0x00100000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct superhyway_device dmac_device = { + .name = "dmac", + .num_resources = 1, + .resource = &dmac_resource, +}; + +static struct resource pbr_resources[] = { + [0] = { + .start = P4SEGADDR(0x1ffffff8), + .end = P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_PBR_BLOCK, + .end = PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device pbr_device = { + .name = "pbr", + .num_resources = ARRAY_SIZE(pbr_resources), + .resource = pbr_resources, +}; + +static struct superhyway_device *sh4202_devices[] __initdata = { + &emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device, +}; + +static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr) +{ + u32 vcrh, vcrl; + u64 tmp; + + /* + * XXX: Even though the SH4-202 Evaluation Device documentation + * indicates that VCRL is mapped first with VCRH at a + 0x04 + * offset, the opposite seems to be true. + * + * Some modules (PBR and ePBR for instance) also appear to have + * VCRL/VCRH flipped in the documentation, but on the SH4-202 + * itself it appears that these are all consistently mapped with + * VCRH preceeding VCRL. + * + * Do not trust the documentation, for it is evil. + */ + vcrh = ctrl_inl(base); + vcrl = ctrl_inl(base + sizeof(u32)); + + tmp = ((u64)vcrh << 32) | vcrl; + memcpy(vcr, &tmp, sizeof(u64)); + + return 0; +} + +static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr) +{ + u64 tmp = *(u64 *)&vcr; + + ctrl_outl((tmp >> 32) & 0xffffffff, base); + ctrl_outl(tmp & 0xffffffff, base + sizeof(u32)); + + return 0; +} + +static struct superhyway_ops sh4202_superhyway_ops = { + .read_vcr = sh4202_read_vcr, + .write_vcr = sh4202_write_vcr, +}; + +struct superhyway_bus superhyway_channels[] = { + { &sh4202_superhyway_ops, }, + { 0, }, +}; + +int __init superhyway_scan_bus(struct superhyway_bus *bus) +{ + return superhyway_add_devices(bus, sh4202_devices, + ARRAY_SIZE(sh4202_devices)); +} + diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 6dce9d0b81f8..fd4f240b833d 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -51,28 +51,24 @@ void enable_hlt(void) EXPORT_SYMBOL(enable_hlt); -void default_idle(void) +void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { if (hlt_counter) { - while (1) - if (need_resched()) - break; + while (!need_resched()) + cpu_relax(); } else { while (!need_resched()) cpu_sleep(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } -void cpu_idle(void) -{ - default_idle(); -} - void machine_restart(char * __unused) { /* SR.BL=1 and invoke address error to let CPU reset (manual reset) */ diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index 1fbe5a428e31..1a8be06519ec 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -80,48 +80,11 @@ void ptrace_disable(struct task_struct *child) /* nothing to do.. */ } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; struct user * dummy = NULL; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -289,10 +252,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 25b9d9ebe858..036050b377cd 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -83,9 +83,9 @@ static struct sh_machine_vector* __init get_mv_byname(const char* name); /* ... */ #define COMMAND_LINE ((char *) (PARAM+0x100)) -#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_IMAGE_START_MASK 0x07FF #define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 +#define RAMDISK_LOAD_FLAG 0x4000 static char command_line[COMMAND_LINE_SIZE] = { 0, }; @@ -284,18 +284,6 @@ void __init setup_arch(char **cmdline_p) #define PFN_DOWN(x) ((x) >> PAGE_SHIFT) #define PFN_PHYS(x) ((x) << PAGE_SHIFT) -#ifdef CONFIG_DISCONTIGMEM - NODE_DATA(0)->bdata = &discontig_node_bdata[0]; - NODE_DATA(1)->bdata = &discontig_node_bdata[1]; - - bootmap_size = init_bootmem_node(NODE_DATA(1), - PFN_UP(__MEMORY_START_2ND), - PFN_UP(__MEMORY_START_2ND), - PFN_DOWN(__MEMORY_START_2ND+__MEMORY_SIZE_2ND)); - free_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, __MEMORY_SIZE_2ND); - reserve_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, bootmap_size); -#endif - /* * Find the highest page frame number we have available */ @@ -306,10 +294,10 @@ void __init setup_arch(char **cmdline_p) */ max_low_pfn = max_pfn; - /* + /* * Partially used pages are not usable - thus * we are rounding upwards: - */ + */ start_pfn = PFN_UP(__pa(_end)); /* @@ -360,12 +348,12 @@ void __init setup_arch(char **cmdline_p) reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); - if (&__rd_start != &__rd_end) { + ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); + if (&__rd_start != &__rd_end) { LOADER_TYPE = 1; INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START; INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start; - } + } if (LOADER_TYPE && INITRD_START) { if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 5ecefc02896a..59e49b18252c 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -112,7 +112,9 @@ int __cpu_up(unsigned int cpu) int start_secondary(void *unused) { - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + cpu = smp_processor_id(); atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; @@ -120,6 +122,7 @@ int start_secondary(void *unused) smp_store_cpu_info(cpu); __smp_slave_init(cpu); + preempt_disable(); per_cpu_trap_init(); atomic_inc(&cpus_booted); diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 4e9c854845a4..e342565f75fb 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -51,11 +51,6 @@ unsigned long mmu_context_cache = NO_CONTEXT; #define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) #endif -#ifdef CONFIG_DISCONTIGMEM -pg_data_t discontig_page_data[MAX_NUMNODES]; -bootmem_data_t discontig_node_bdata[MAX_NUMNODES]; -#endif - void (*copy_page)(void *from, void *to); void (*clear_page)(void *to); @@ -216,15 +211,6 @@ void __init paging_init(void) #endif NODE_DATA(0)->node_mem_map = NULL; free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); - -#ifdef CONFIG_DISCONTIGMEM - /* - * And for discontig, do some more fixups on the zone sizes.. - */ - zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT; - zones_size[ZONE_NORMAL] = 0; - free_area_init_node(1, NODE_DATA(1), zones_size, __MEMORY_START_2ND >> PAGE_SHIFT, 0); -#endif } void __init mem_init(void) @@ -248,7 +234,7 @@ void __init mem_init(void) memset(empty_zero_page, 0, PAGE_SIZE); __flush_wback_region(empty_zero_page, PAGE_SIZE); - /* + /* * Setup wrappers for copy/clear_page(), these will get overridden * later in the boot process if a better method is available. */ @@ -257,9 +243,6 @@ void __init mem_init(void) /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem_node(NODE_DATA(0)); -#ifdef CONFIG_DISCONTIGMEM - totalram_pages += free_all_bootmem_node(NODE_DATA(1)); -#endif reservedpages = 0; for (tmp = 0; tmp < num_physpages; tmp++) /* @@ -286,7 +269,7 @@ void __init mem_init(void) void free_initmem(void) { unsigned long addr; - + addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 7a0d5c10bf20..46b09e26e082 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -40,12 +40,17 @@ void update_mmu_cache(struct vm_area_struct * vma, return; #if defined(CONFIG_SH7705_CACHE_32KB) - struct page *page; - page = pte_page(pte); - if (VALID_PAGE(page) && !test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); + { + struct page *page = pte_page(pte); + unsigned long pfn = pte_pfn(pte); + + if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } } #endif @@ -80,7 +85,7 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) */ addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000); data = (page & 0xfffe0000) | asid; /* VALID bit is off */ - + if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) { addr |= MMU_PAGE_ASSOC_BIT; ways = 1; /* we already know the way .. */ diff --git a/arch/sh/ramdisk/Makefile b/arch/sh/ramdisk/Makefile deleted file mode 100644 index 99e1c68673cf..000000000000 --- a/arch/sh/ramdisk/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# Makefile for a ramdisk image -# - -obj-y += ramdisk.o - - -O_FORMAT = $(shell $(OBJDUMP) -i | head -n 2 | grep elf32) -img := $(subst ",,$(CONFIG_EMBEDDED_RAMDISK_IMAGE)) -# add $(src) when $(img) is relative -img := $(subst $(src)//,/,$(src)/$(img)) - -quiet_cmd_ramdisk = LD $@ -define cmd_ramdisk - $(LD) -T $(srctree)/$(src)/ld.script -b binary --oformat $(O_FORMAT) \ - -o $@ $(img) -endef - -$(obj)/ramdisk.o: $(img) $(srctree)/$(src)/ld.script - $(call cmd,ramdisk) diff --git a/arch/sh/ramdisk/ld.script b/arch/sh/ramdisk/ld.script deleted file mode 100644 index 94beee248c04..000000000000 --- a/arch/sh/ramdisk/ld.script +++ /dev/null @@ -1,9 +0,0 @@ -OUTPUT_ARCH(sh) -SECTIONS -{ - .initrd : - { - *(.data) - } -} - diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c index efde41c0cd66..b95d04141855 100644 --- a/arch/sh64/kernel/process.c +++ b/arch/sh64/kernel/process.c @@ -307,23 +307,19 @@ __setup("hlt", hlt_setup); static inline void hlt(void) { - if (hlt_counter) - return; - __asm__ __volatile__ ("sleep" : : : "memory"); } /* * The idle loop on a uniprocessor SH.. */ -void default_idle(void) +void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { if (hlt_counter) { - while (1) - if (need_resched()) - break; + while (!need_resched()) + cpu_relax(); } else { local_irq_disable(); while (!need_resched()) { @@ -334,13 +330,11 @@ void default_idle(void) } local_irq_enable(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } -} -void cpu_idle(void) -{ - default_idle(); } void machine_restart(char * __unused) diff --git a/arch/sh64/kernel/ptrace.c b/arch/sh64/kernel/ptrace.c index 71f2eec00b99..cd22e9471316 100644 --- a/arch/sh64/kernel/ptrace.c +++ b/arch/sh64/kernel/ptrace.c @@ -28,6 +28,7 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/signal.h> +#include <linux/syscalls.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -121,61 +122,11 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; - extern void poke_real_address_q(unsigned long long addr, unsigned long long data); -#define WPC_DBRMODE 0x0d104008 - static int first_call = 1; int ret; - lock_kernel(); - - if (first_call) { - /* Set WPC.DBRMODE to 0. This makes all debug events get - * delivered through RESVEC, i.e. into the handlers in entry.S. - * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE - * would normally be left set to 1, which makes debug events get - * delivered through DBRVEC, i.e. into the remote gdb's - * handlers. This prevents ptrace getting them, and confuses - * the remote gdb.) */ - printk("DBRMODE set to 0 to permit native debugging\n"); - poke_real_address_q(WPC_DBRMODE, 0); - first_call = 0; - } - - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -313,13 +264,33 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } +asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) +{ + extern void poke_real_address_q(unsigned long long addr, unsigned long long data); +#define WPC_DBRMODE 0x0d104008 + static int first_call = 1; + + lock_kernel(); + if (first_call) { + /* Set WPC.DBRMODE to 0. This makes all debug events get + * delivered through RESVEC, i.e. into the handlers in entry.S. + * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE + * would normally be left set to 1, which makes debug events get + * delivered through DBRVEC, i.e. into the remote gdb's + * handlers. This prevents ptrace getting them, and confuses + * the remote gdb.) */ + printk("DBRMODE set to 0 to permit native debugging\n"); + poke_real_address_q(WPC_DBRMODE, 0); + first_call = 0; + } + unlock_kernel(); + + return sys_ptrace(request, pid, addr, data); +} + asmlinkage void syscall_trace(void) { struct task_struct *tsk = current; diff --git a/arch/sh64/kernel/syscalls.S b/arch/sh64/kernel/syscalls.S index a3d037805f1c..c0079d54c850 100644 --- a/arch/sh64/kernel/syscalls.S +++ b/arch/sh64/kernel/syscalls.S @@ -46,7 +46,7 @@ sys_call_table: .long sys_setuid16 .long sys_getuid16 .long sys_stime /* 25 */ - .long sys_ptrace + .long sh64_ptrace .long sys_alarm .long sys_fstat .long sys_pause diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 6537445dac0e..3cfb8be3ff6d 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -201,6 +201,14 @@ config SUN_OPENPROMFS Only choose N if you know in advance that you will not need to modify OpenPROM settings on the running system. +config SPARC_LED + tristate "Sun4m LED driver" + help + This driver toggles the front-panel LED on sun4m systems + in a user-specifyable manner. It's state can be probed + by reading /proc/led and it's blinking mode can be changed + via writes to /proc/led + source "fs/Kconfig.binfmt" config SUNOS_EMUL diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 3d22ba2af01c..1b83e21841b5 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SUN_AUXIO) += auxio.o obj-$(CONFIG_PCI) += ebus.o obj-$(CONFIG_SUN_PM) += apc.o pmc.o obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o +obj-$(CONFIG_SPARC_LED) += led.o ifdef CONFIG_SUNOS_EMUL obj-y += sys_sunos.o sunos_ioctl.o diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index 6a4ebc62193e..d7bfc61d2879 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -75,7 +75,7 @@ struct cpu_fp_info linux_sparc_fpu[] = { { 9, 3, "Fujitsu or Weitek on-chip FPU"}, }; -#define NSPARCFPU (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info)) +#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu) struct cpu_iu_info linux_sparc_chips[] = { /* Sun4/100, 4/200, SLC */ @@ -120,7 +120,7 @@ struct cpu_iu_info linux_sparc_chips[] = { { 0xf, 0, "UNKNOWN CPU-VENDOR/TYPE"}, }; -#define NSPARCCHIPS (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info)) +#define NSPARCCHIPS ARRAY_SIZE(linux_sparc_chips) char *sparc_cpu_type; char *sparc_fpu_type; diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c new file mode 100644 index 000000000000..2a3afca453c9 --- /dev/null +++ b/arch/sparc/kernel/led.c @@ -0,0 +1,139 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/string.h> + +#include <asm/auxio.h> + +#define LED_MAX_LENGTH 8 /* maximum chars written to proc file */ + +static inline void led_toggle(void) +{ + unsigned char val = get_auxio(); + unsigned char on, off; + + if (val & AUXIO_LED) { + on = 0; + off = AUXIO_LED; + } else { + on = AUXIO_LED; + off = 0; + } + + set_auxio(on, off); +} + +static struct timer_list led_blink_timer; + +static void led_blink(unsigned long timeout) +{ + led_toggle(); + + /* reschedule */ + if (!timeout) { /* blink according to load */ + led_blink_timer.expires = jiffies + + ((1 + (avenrun[0] >> FSHIFT)) * HZ); + led_blink_timer.data = 0; + } else { /* blink at user specified interval */ + led_blink_timer.expires = jiffies + (timeout * HZ); + led_blink_timer.data = timeout; + } + add_timer(&led_blink_timer); +} + +static int led_read_proc(char *buf, char **start, off_t offset, int count, + int *eof, void *data) +{ + int len = 0; + + if (get_auxio() & AUXIO_LED) + len = sprintf(buf, "on\n"); + else + len = sprintf(buf, "off\n"); + + return len; +} + +static int led_write_proc(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + char *buf = NULL; + + if (count > LED_MAX_LENGTH) + count = LED_MAX_LENGTH; + + buf = kmalloc(sizeof(char) * (count + 1), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (copy_from_user(buf, buffer, count)) { + kfree(buf); + return -EFAULT; + } + + buf[count] = '\0'; + + /* work around \n when echo'ing into proc */ + if (buf[count - 1] == '\n') + buf[count - 1] = '\0'; + + /* before we change anything we want to stop any running timers, + * otherwise calls such as on will have no persistent effect + */ + del_timer_sync(&led_blink_timer); + + if (!strcmp(buf, "on")) { + auxio_set_led(AUXIO_LED_ON); + } else if (!strcmp(buf, "toggle")) { + led_toggle(); + } else if ((*buf > '0') && (*buf <= '9')) { + led_blink(simple_strtoul(buf, NULL, 10)); + } else if (!strcmp(buf, "load")) { + led_blink(0); + } else { + auxio_set_led(AUXIO_LED_OFF); + } + + kfree(buf); + + return count; +} + +static struct proc_dir_entry *led; + +#define LED_VERSION "0.1" + +static int __init led_init(void) +{ + init_timer(&led_blink_timer); + led_blink_timer.function = led_blink; + + led = create_proc_entry("led", 0, NULL); + if (!led) + return -ENOMEM; + + led->read_proc = led_read_proc; /* reader function */ + led->write_proc = led_write_proc; /* writer function */ + led->owner = THIS_MODULE; + + printk(KERN_INFO + "led: version %s, Lars Kotthoff <metalhead@metalhead.ws>\n", + LED_VERSION); + + return 0; +} + +static void __exit led_exit(void) +{ + remove_proc_entry("led", NULL); + del_timer_sync(&led_blink_timer); +} + +module_init(led_init); +module_exit(led_exit); + +MODULE_AUTHOR("Lars Kotthoff <metalhead@metalhead.ws>"); +MODULE_DESCRIPTION("Provides control of the front LED on SPARC systems."); +MODULE_LICENSE("GPL"); +MODULE_VERSION(LED_VERSION); diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 25e31d5ec99b..cccfc12802ed 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -143,7 +143,7 @@ static struct pcic_ca2irq pcic_i_jk[] = { * as several PROMs may be installed on the same physical board. */ #define SN2L_INIT(name, map) \ - { name, map, sizeof(map)/sizeof(struct pcic_ca2irq) } + { name, map, ARRAY_SIZE(map) } static struct pcic_sn2list pcic_known_sysnames[] = { SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a), /* JE1, PROM 2.32 */ diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c index 29e72b57d4fd..ea8647411462 100644 --- a/arch/sparc/kernel/process.c +++ b/arch/sparc/kernel/process.c @@ -67,13 +67,6 @@ extern void fpsave(unsigned long *, unsigned long *, void *, unsigned long *); struct task_struct *last_task_used_math = NULL; struct thread_info *current_set[NR_CPUS]; -/* - * default_idle is new in 2.5. XXX Review, currently stolen from sparc64. - */ -void default_idle(void) -{ -} - #ifndef CONFIG_SMP #define SUN4C_FAULT_HIGH 100 @@ -92,12 +85,11 @@ void cpu_idle(void) static unsigned long fps; unsigned long now; unsigned long faults; - unsigned long flags; extern unsigned long sun4c_kernel_faults; extern void sun4c_grow_kernel_ring(void); - local_irq_save(flags); + local_irq_disable(); now = jiffies; count -= (now - last_jiffies); last_jiffies = now; @@ -113,14 +105,19 @@ void cpu_idle(void) sun4c_grow_kernel_ring(); } } - local_irq_restore(flags); + local_irq_enable(); } - while((!need_resched()) && pm_idle) { - (*pm_idle)(); + if (pm_idle) { + while (!need_resched()) + (*pm_idle)(); + } else { + while (!need_resched()) + cpu_relax(); } - + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } @@ -130,13 +127,15 @@ void cpu_idle(void) /* This is being executed in task 0 'user space'. */ void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while(1) { - if(need_resched()) { - schedule(); - check_pgt_cache(); - } - barrier(); /* or else gcc optimizes... */ + while (!need_resched()) + cpu_relax(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + check_pgt_cache(); } } diff --git a/arch/sparc/kernel/sunos_ioctl.c b/arch/sparc/kernel/sunos_ioctl.c index df1c0b31a930..a6ba3d26222c 100644 --- a/arch/sparc/kernel/sunos_ioctl.c +++ b/arch/sparc/kernel/sunos_ioctl.c @@ -23,7 +23,6 @@ #include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/file.h> -#include <asm/kbio.h> #if 0 extern char sunkbd_type; diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c index 2e64e8c3e8e5..cb3cf0f22822 100644 --- a/arch/sparc/lib/atomic32.c +++ b/arch/sparc/lib/atomic32.c @@ -37,17 +37,43 @@ int __atomic_add_return(int i, atomic_t *v) spin_unlock_irqrestore(ATOMIC_HASH(v), flags); return ret; } +EXPORT_SYMBOL(__atomic_add_return); -void atomic_set(atomic_t *v, int i) +int atomic_cmpxchg(atomic_t *v, int old, int new) { + int ret; unsigned long flags; + spin_lock_irqsave(ATOMIC_HASH(v), flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; - v->counter = i; + spin_unlock_irqrestore(ATOMIC_HASH(v), flags); + return ret; +} + +int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + spin_lock_irqsave(ATOMIC_HASH(v), flags); + ret = v->counter; + if (ret != u) + v->counter += a; spin_unlock_irqrestore(ATOMIC_HASH(v), flags); + return ret != u; } -EXPORT_SYMBOL(__atomic_add_return); -EXPORT_SYMBOL(atomic_set); +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +/* Atomic operations are already serializing */ +void atomic_set(atomic_t *v, int i) +{ + unsigned long flags; + spin_lock_irqsave(ATOMIC_HASH(v), flags); + v->counter = i; + spin_unlock_irqrestore(ATOMIC_HASH(v), flags); +} +EXPORT_SYMBOL(atomic_set); diff --git a/arch/sparc/lib/bitext.c b/arch/sparc/lib/bitext.c index 94b05e8c906c..2e168d16547f 100644 --- a/arch/sparc/lib/bitext.c +++ b/arch/sparc/lib/bitext.c @@ -10,6 +10,7 @@ */ #include <linux/smp_lock.h> +#include <linux/string.h> #include <linux/bitops.h> #include <asm/bitext.h> diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c index 2bbd53f3cafb..9eeed3347df3 100644 --- a/arch/sparc/mm/fault.c +++ b/arch/sparc/mm/fault.c @@ -33,8 +33,6 @@ #include <asm/kdebug.h> #include <asm/uaccess.h> -#define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0])) - extern int prom_node_root; /* At boot time we determine these two values necessary for setting diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 1e9d8638a28a..3fded69b1922 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -377,8 +377,21 @@ source "drivers/fc4/Kconfig" source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/sparc64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/sparc64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index fa06ea04837b..3e31be494e54 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -11,16 +11,6 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_DCFLUSH bool "D-cache flush debugging" depends on DEBUG_KERNEL diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c index 77ef5df4e5a7..00eed88ef2e8 100644 --- a/arch/sparc64/kernel/cpu.c +++ b/arch/sparc64/kernel/cpu.c @@ -43,7 +43,7 @@ struct cpu_fp_info linux_sparc_fpu[] = { { 0x3e, 0x22, 0, "UltraSparc IIIi+ integrated FPU"}, }; -#define NSPARCFPU (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info)) +#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu) struct cpu_iu_info linux_sparc_chips[] = { { 0x17, 0x10, "TI UltraSparc I (SpitFire)"}, @@ -59,7 +59,7 @@ struct cpu_iu_info linux_sparc_chips[] = { { 0x3e, 0x22, "TI UltraSparc IIIi+ (Serrano)"}, }; -#define NSPARCCHIPS (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info)) +#define NSPARCCHIPS ARRAY_SIZE(linux_sparc_chips) char *sparc_cpu_type = "cpu-oops"; char *sparc_fpu_type = "fpu-oops"; diff --git a/arch/sparc64/kernel/ioctl32.c b/arch/sparc64/kernel/ioctl32.c index e6a00325075a..196b208665a2 100644 --- a/arch/sparc64/kernel/ioctl32.c +++ b/arch/sparc64/kernel/ioctl32.c @@ -11,461 +11,13 @@ #define INCLUDES #include "compat_ioctl.c" -#include <linux/ncp_fs.h> #include <linux/syscalls.h> -#include <asm/fbio.h> -#include <asm/kbio.h> -#include <asm/vuid_event.h> -#include <asm/envctrl.h> -#include <asm/display7seg.h> -#include <asm/openpromio.h> -#include <asm/audioio.h> -#include <asm/watchdog.h> - -/* Use this to get at 32-bit user passed pointers. - * See sys_sparc32.c for description about it. - */ -#define A(__x) compat_ptr(__x) - -static __inline__ void *alloc_user_space(long len) -{ - struct pt_regs *regs = current_thread_info()->kregs; - unsigned long usp = regs->u_regs[UREG_I6]; - - if (!(test_thread_flag(TIF_32BIT))) - usp += STACK_BIAS; - - return (void *) (usp - len); -} #define CODE #include "compat_ioctl.c" -struct fbcmap32 { - int index; /* first element (0 origin) */ - int count; - u32 red; - u32 green; - u32 blue; -}; - -#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) -#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) - -static int fbiogetputcmap(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - struct fbcmap32 __user *argp = (void __user *)arg; - struct fbcmap __user *p = compat_alloc_user_space(sizeof(*p)); - u32 addr; - int ret; - - ret = copy_in_user(p, argp, 2 * sizeof(int)); - ret |= get_user(addr, &argp->red); - ret |= put_user(compat_ptr(addr), &p->red); - ret |= get_user(addr, &argp->green); - ret |= put_user(compat_ptr(addr), &p->green); - ret |= get_user(addr, &argp->blue); - ret |= put_user(compat_ptr(addr), &p->blue); - if (ret) - return -EFAULT; - return sys_ioctl(fd, (cmd == FBIOPUTCMAP32) ? FBIOPUTCMAP_SPARC : FBIOGETCMAP_SPARC, (unsigned long)p); -} - -struct fbcursor32 { - short set; /* what to set, choose from the list above */ - short enable; /* cursor on/off */ - struct fbcurpos pos; /* cursor position */ - struct fbcurpos hot; /* cursor hot spot */ - struct fbcmap32 cmap; /* color map info */ - struct fbcurpos size; /* cursor bit map size */ - u32 image; /* cursor image bits */ - u32 mask; /* cursor mask bits */ -}; - -#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) -#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) - -static int fbiogscursor(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - struct fbcursor __user *p = compat_alloc_user_space(sizeof(*p)); - struct fbcursor32 __user *argp = (void __user *)arg; - compat_uptr_t addr; - int ret; - - ret = copy_in_user(p, argp, - 2 * sizeof (short) + 2 * sizeof(struct fbcurpos)); - ret |= copy_in_user(&p->size, &argp->size, sizeof(struct fbcurpos)); - ret |= copy_in_user(&p->cmap, &argp->cmap, 2 * sizeof(int)); - ret |= get_user(addr, &argp->cmap.red); - ret |= put_user(compat_ptr(addr), &p->cmap.red); - ret |= get_user(addr, &argp->cmap.green); - ret |= put_user(compat_ptr(addr), &p->cmap.green); - ret |= get_user(addr, &argp->cmap.blue); - ret |= put_user(compat_ptr(addr), &p->cmap.blue); - ret |= get_user(addr, &argp->mask); - ret |= put_user(compat_ptr(addr), &p->mask); - ret |= get_user(addr, &argp->image); - ret |= put_user(compat_ptr(addr), &p->image); - if (ret) - return -EFAULT; - return sys_ioctl (fd, FBIOSCURSOR, (unsigned long)p); -} - -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -/* This really belongs in include/linux/drm.h -DaveM */ -#include "../../../drivers/char/drm/drm.h" - -typedef struct drm32_version { - int version_major; /* Major version */ - int version_minor; /* Minor version */ - int version_patchlevel;/* Patch level */ - int name_len; /* Length of name buffer */ - u32 name; /* Name of driver */ - int date_len; /* Length of date buffer */ - u32 date; /* User-space buffer to hold date */ - int desc_len; /* Length of desc buffer */ - u32 desc; /* User-space buffer to hold desc */ -} drm32_version_t; -#define DRM32_IOCTL_VERSION DRM_IOWR(0x00, drm32_version_t) - -static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_version_t __user *uversion = (drm32_version_t __user *)arg; - drm_version_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (clear_user(p, 3 * sizeof(int)) || - get_user(n, &uversion->name_len) || - put_user(n, &p->name_len) || - get_user(addr, &uversion->name) || - put_user(compat_ptr(addr), &p->name) || - get_user(n, &uversion->date_len) || - put_user(n, &p->date_len) || - get_user(addr, &uversion->date) || - put_user(compat_ptr(addr), &p->date) || - get_user(n, &uversion->desc_len) || - put_user(n, &p->desc_len) || - get_user(addr, &uversion->desc) || - put_user(compat_ptr(addr), &p->desc)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_VERSION, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uversion, p, 3 * sizeof(int)) || - get_user(n, &p->name_len) || - put_user(n, &uversion->name_len) || - get_user(n, &p->date_len) || - put_user(n, &uversion->date_len) || - get_user(n, &p->desc_len) || - put_user(n, &uversion->desc_len)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_unique { - int unique_len; /* Length of unique */ - u32 unique; /* Unique name for driver instantiation */ -} drm32_unique_t; -#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t) -#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t) - -static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_unique_t __user *uarg = (drm32_unique_t __user *)arg; - drm_unique_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (get_user(n, &uarg->unique_len) || - put_user(n, &p->unique_len) || - get_user(addr, &uarg->unique) || - put_user(compat_ptr(addr), &p->unique)) - return -EFAULT; - - if (cmd == DRM32_IOCTL_GET_UNIQUE) - ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)p); - else - ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)p); - - if (ret) - return ret; - - if (get_user(n, &p->unique_len) || put_user(n, &uarg->unique_len)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_map { - u32 offset; /* Requested physical address (0 for SAREA)*/ - u32 size; /* Requested physical size (bytes) */ - drm_map_type_t type; /* Type of memory to map */ - drm_map_flags_t flags; /* Flags */ - u32 handle; /* User-space: "Handle" to pass to mmap */ - /* Kernel-space: kernel-virtual address */ - int mtrr; /* MTRR slot used */ - /* Private data */ -} drm32_map_t; -#define DRM32_IOCTL_ADD_MAP DRM_IOWR(0x15, drm32_map_t) - -static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_map_t __user *uarg = (drm32_map_t __user *) arg; - drm_map_t karg; - mm_segment_t old_fs; - u32 tmp; - int ret; - - ret = get_user(karg.offset, &uarg->offset); - ret |= get_user(karg.size, &uarg->size); - ret |= get_user(karg.type, &uarg->type); - ret |= get_user(karg.flags, &uarg->flags); - ret |= get_user(tmp, &uarg->handle); - ret |= get_user(karg.mtrr, &uarg->mtrr); - if (ret) - return -EFAULT; - - karg.handle = (void *) (unsigned long) tmp; - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg); - set_fs(old_fs); - - if (!ret) { - ret = put_user(karg.offset, &uarg->offset); - ret |= put_user(karg.size, &uarg->size); - ret |= put_user(karg.type, &uarg->type); - ret |= put_user(karg.flags, &uarg->flags); - tmp = (u32) (long)karg.handle; - ret |= put_user(tmp, &uarg->handle); - ret |= put_user(karg.mtrr, &uarg->mtrr); - if (ret) - ret = -EFAULT; - } - - return ret; -} - -typedef struct drm32_buf_info { - int count; /* Entries in list */ - u32 list; /* (drm_buf_desc_t *) */ -} drm32_buf_info_t; -#define DRM32_IOCTL_INFO_BUFS DRM_IOWR(0x18, drm32_buf_info_t) - -static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_info_t __user *uarg = (drm32_buf_info_t __user *)arg; - drm_buf_info_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (get_user(n, &uarg->count) || put_user(n, &p->count) || - get_user(addr, &uarg->list) || put_user(compat_ptr(addr), &p->list)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long)p); - if (ret) - return ret; - - if (get_user(n, &p->count) || put_user(n, &uarg->count)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_buf_free { - int count; - u32 list; /* (int *) */ -} drm32_buf_free_t; -#define DRM32_IOCTL_FREE_BUFS DRM_IOW( 0x1a, drm32_buf_free_t) - -static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_free_t __user *uarg = (drm32_buf_free_t __user *)arg; - drm_buf_free_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - - if (get_user(n, &uarg->count) || put_user(n, &p->count) || - get_user(addr, &uarg->list) || put_user(compat_ptr(addr), &p->list)) - return -EFAULT; - - return sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long)p); -} - -typedef struct drm32_buf_pub { - int idx; /* Index into master buflist */ - int total; /* Buffer size */ - int used; /* Amount of buffer in use (for DMA) */ - u32 address; /* Address of buffer (void *) */ -} drm32_buf_pub_t; - -typedef struct drm32_buf_map { - int count; /* Length of buflist */ - u32 virtual; /* Mmaped area in user-virtual (void *) */ - u32 list; /* Buffer information (drm_buf_pub_t *) */ -} drm32_buf_map_t; -#define DRM32_IOCTL_MAP_BUFS DRM_IOWR(0x19, drm32_buf_map_t) - -static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_map_t __user *uarg = (drm32_buf_map_t __user *)arg; - drm32_buf_pub_t __user *ulist; - drm_buf_map_t __user *arg64; - drm_buf_pub_t __user *list; - int orig_count, ret, i; - int n; - compat_uptr_t addr; - - if (get_user(orig_count, &uarg->count)) - return -EFAULT; - - arg64 = compat_alloc_user_space(sizeof(drm_buf_map_t) + - (size_t)orig_count * sizeof(drm_buf_pub_t)); - list = (void __user *)(arg64 + 1); - - if (put_user(orig_count, &arg64->count) || - put_user(list, &arg64->list) || - get_user(addr, &uarg->virtual) || - put_user(compat_ptr(addr), &arg64->virtual) || - get_user(addr, &uarg->list)) - return -EFAULT; - - ulist = compat_ptr(addr); - - for (i = 0; i < orig_count; i++) { - if (get_user(n, &ulist[i].idx) || - put_user(n, &list[i].idx) || - get_user(n, &ulist[i].total) || - put_user(n, &list[i].total) || - get_user(n, &ulist[i].used) || - put_user(n, &list[i].used) || - get_user(addr, &ulist[i].address) || - put_user(compat_ptr(addr), &list[i].address)) - return -EFAULT; - } - - ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) arg64); - if (ret) - return ret; - - for (i = 0; i < orig_count; i++) { - void __user *p; - if (get_user(n, &list[i].idx) || - put_user(n, &ulist[i].idx) || - get_user(n, &list[i].total) || - put_user(n, &ulist[i].total) || - get_user(n, &list[i].used) || - put_user(n, &ulist[i].used) || - get_user(p, &list[i].address) || - put_user((unsigned long)p, &ulist[i].address)) - return -EFAULT; - } - - if (get_user(n, &arg64->count) || put_user(n, &uarg->count)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_dma { - /* Indices here refer to the offset into - buflist in drm_buf_get_t. */ - int context; /* Context handle */ - int send_count; /* Number of buffers to send */ - u32 send_indices; /* List of handles to buffers (int *) */ - u32 send_sizes; /* Lengths of data to send (int *) */ - drm_dma_flags_t flags; /* Flags */ - int request_count; /* Number of buffers requested */ - int request_size; /* Desired size for buffers */ - u32 request_indices; /* Buffer information (int *) */ - u32 request_sizes; /* (int *) */ - int granted_count; /* Number of buffers granted */ -} drm32_dma_t; -#define DRM32_IOCTL_DMA DRM_IOWR(0x29, drm32_dma_t) - -/* RED PEN The DRM layer blindly dereferences the send/request - * index/size arrays even though they are userland - * pointers. -DaveM - */ -static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_dma_t __user *uarg = (drm32_dma_t __user *) arg; - drm_dma_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int ret; - - if (copy_in_user(p, uarg, 2 * sizeof(int)) || - get_user(addr, &uarg->send_indices) || - put_user(compat_ptr(addr), &p->send_indices) || - get_user(addr, &uarg->send_sizes) || - put_user(compat_ptr(addr), &p->send_sizes) || - copy_in_user(&p->flags, &uarg->flags, sizeof(drm_dma_flags_t)) || - copy_in_user(&p->request_count, &uarg->request_count, sizeof(int))|| - copy_in_user(&p->request_size, &uarg->request_size, sizeof(int)) || - get_user(addr, &uarg->request_indices) || - put_user(compat_ptr(addr), &p->request_indices) || - get_user(addr, &uarg->request_sizes) || - put_user(compat_ptr(addr), &p->request_sizes) || - copy_in_user(&p->granted_count, &uarg->granted_count, sizeof(int))) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uarg, p, 2 * sizeof(int)) || - copy_in_user(&uarg->flags, &p->flags, sizeof(drm_dma_flags_t)) || - copy_in_user(&uarg->request_count, &p->request_count, sizeof(int))|| - copy_in_user(&uarg->request_size, &p->request_size, sizeof(int)) || - copy_in_user(&uarg->granted_count, &p->granted_count, sizeof(int))) - return -EFAULT; - - return 0; -} - -typedef struct drm32_ctx_res { - int count; - u32 contexts; /* (drm_ctx_t *) */ -} drm32_ctx_res_t; -#define DRM32_IOCTL_RES_CTX DRM_IOWR(0x26, drm32_ctx_res_t) - -static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_ctx_res_t __user *uarg = (drm32_ctx_res_t __user *) arg; - drm_ctx_res_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int ret; - - if (copy_in_user(p, uarg, sizeof(int)) || - get_user(addr, &uarg->contexts) || - put_user(compat_ptr(addr), &p->contexts)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uarg, p, sizeof(int))) - return -EFAULT; - - return 0; -} - -#endif - -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ @@ -475,113 +27,6 @@ IOCTL_TABLE_START #include <linux/compat_ioctl.h> #define DECLARES #include "compat_ioctl.c" -COMPATIBLE_IOCTL(FBIOGTYPE) -COMPATIBLE_IOCTL(FBIOSATTR) -COMPATIBLE_IOCTL(FBIOGATTR) -COMPATIBLE_IOCTL(FBIOSVIDEO) -COMPATIBLE_IOCTL(FBIOGVIDEO) -COMPATIBLE_IOCTL(FBIOGCURSOR32) /* This is not implemented yet. Later it should be converted... */ -COMPATIBLE_IOCTL(FBIOSCURPOS) -COMPATIBLE_IOCTL(FBIOGCURPOS) -COMPATIBLE_IOCTL(FBIOGCURMAX) -/* Little k */ -COMPATIBLE_IOCTL(KIOCTYPE) -COMPATIBLE_IOCTL(KIOCLAYOUT) -COMPATIBLE_IOCTL(KIOCGTRANS) -COMPATIBLE_IOCTL(KIOCTRANS) -COMPATIBLE_IOCTL(KIOCCMD) -COMPATIBLE_IOCTL(KIOCSDIRECT) -COMPATIBLE_IOCTL(KIOCSLED) -COMPATIBLE_IOCTL(KIOCGLED) -COMPATIBLE_IOCTL(KIOCSRATE) -COMPATIBLE_IOCTL(KIOCGRATE) -COMPATIBLE_IOCTL(VUIDSFORMAT) -COMPATIBLE_IOCTL(VUIDGFORMAT) -/* Little v, the video4linux ioctls */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ -COMPATIBLE_IOCTL(ENVCTRL_RD_WARNING_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_SHUTDOWN_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_CPU_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_FAN_STATUS) -COMPATIBLE_IOCTL(ENVCTRL_RD_VOLTAGE_STATUS) -COMPATIBLE_IOCTL(ENVCTRL_RD_SCSI_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_ETHERNET_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_MTHRBD_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_CPU_VOLTAGE) -COMPATIBLE_IOCTL(ENVCTRL_RD_GLOBALADDRESS) -/* COMPATIBLE_IOCTL(D7SIOCRD) same value as ENVCTRL_RD_VOLTAGE_STATUS */ -COMPATIBLE_IOCTL(D7SIOCWR) -COMPATIBLE_IOCTL(D7SIOCTM) -/* OPENPROMIO, SunOS/Solaris only, the NetBSD one's have - * embedded pointers in the arg which we'd need to clean up... - */ -COMPATIBLE_IOCTL(OPROMGETOPT) -COMPATIBLE_IOCTL(OPROMSETOPT) -COMPATIBLE_IOCTL(OPROMNXTOPT) -COMPATIBLE_IOCTL(OPROMSETOPT2) -COMPATIBLE_IOCTL(OPROMNEXT) -COMPATIBLE_IOCTL(OPROMCHILD) -COMPATIBLE_IOCTL(OPROMGETPROP) -COMPATIBLE_IOCTL(OPROMNXTPROP) -COMPATIBLE_IOCTL(OPROMU2P) -COMPATIBLE_IOCTL(OPROMGETCONS) -COMPATIBLE_IOCTL(OPROMGETFBNAME) -COMPATIBLE_IOCTL(OPROMGETBOOTARGS) -COMPATIBLE_IOCTL(OPROMSETCUR) -COMPATIBLE_IOCTL(OPROMPCI2NODE) -COMPATIBLE_IOCTL(OPROMPATH2NODE) -/* Big L */ -COMPATIBLE_IOCTL(LOOP_SET_STATUS64) -COMPATIBLE_IOCTL(LOOP_GET_STATUS64) -/* Big A */ -COMPATIBLE_IOCTL(AUDIO_GETINFO) -COMPATIBLE_IOCTL(AUDIO_SETINFO) -COMPATIBLE_IOCTL(AUDIO_DRAIN) -COMPATIBLE_IOCTL(AUDIO_GETDEV) -COMPATIBLE_IOCTL(AUDIO_GETDEV_SUNOS) -COMPATIBLE_IOCTL(AUDIO_FLUSH) -COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE_MULTI) -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -COMPATIBLE_IOCTL(DRM_IOCTL_GET_MAGIC) -COMPATIBLE_IOCTL(DRM_IOCTL_IRQ_BUSID) -COMPATIBLE_IOCTL(DRM_IOCTL_AUTH_MAGIC) -COMPATIBLE_IOCTL(DRM_IOCTL_BLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_UNBLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_CONTROL) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_BUFS) -COMPATIBLE_IOCTL(DRM_IOCTL_MARK_BUFS) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_RM_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_MOD_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_GET_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_SWITCH_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_NEW_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_DRAW) -COMPATIBLE_IOCTL(DRM_IOCTL_RM_DRAW) -COMPATIBLE_IOCTL(DRM_IOCTL_LOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_UNLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_FINISH) -#endif /* DRM */ -COMPATIBLE_IOCTL(WIOCSTART) -COMPATIBLE_IOCTL(WIOCSTOP) -COMPATIBLE_IOCTL(WIOCGSTAT) -/* And these ioctls need translation */ -/* Note SIOCRTMSG is no longer, so this is safe and * the user would have seen just an -EINVAL anyways. */ -HANDLE_IOCTL(FBIOPUTCMAP32, fbiogetputcmap) -HANDLE_IOCTL(FBIOGETCMAP32, fbiogetputcmap) -HANDLE_IOCTL(FBIOSCURSOR32, fbiogscursor) -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version) -HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique) -HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique) -HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap) -HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs) -HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs) -HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs) -HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma) -HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx) -#endif /* DRM */ #if 0 HANDLE_IOCTL(RTC32_IRQP_READ, do_rtc_ioctl) HANDLE_IOCTL(RTC32_IRQP_SET, do_rtc_ioctl) diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index 0d66d07c8c6e..96bd09b098f4 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -38,6 +38,9 @@ * - Mark that we are no longer actively in a kprobe. */ +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + int __kprobes arch_prepare_kprobe(struct kprobe *p) { return 0; @@ -66,46 +69,39 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) { } -static struct kprobe *current_kprobe; -static unsigned long current_kprobe_orig_tnpc; -static unsigned long current_kprobe_orig_tstate_pil; -static unsigned int kprobe_status; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_orig_tnpc_prev; -static unsigned long kprobe_orig_tstate_pil_prev; -static unsigned int kprobe_status_prev; - -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_status_prev = kprobe_status; - kprobe_orig_tnpc_prev = current_kprobe_orig_tnpc; - kprobe_orig_tstate_pil_prev = current_kprobe_orig_tstate_pil; - kprobe_prev = current_kprobe; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.orig_tnpc = kcb->kprobe_orig_tnpc; + kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_status = kprobe_status_prev; - current_kprobe_orig_tnpc = kprobe_orig_tnpc_prev; - current_kprobe_orig_tstate_pil = kprobe_orig_tstate_pil_prev; - current_kprobe = kprobe_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_orig_tnpc = kcb->prev_kprobe.orig_tnpc; + kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe_orig_tnpc = regs->tnpc; - current_kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); - current_kprobe = p; + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_orig_tnpc = regs->tnpc; + kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); } -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { regs->tstate |= TSTATE_PIL; /*single step inline, if it a breakpoint instruction*/ if (p->opcode == BREAKPOINT_INSTRUCTION) { regs->tpc = (unsigned long) p->addr; - regs->tnpc = current_kprobe_orig_tnpc; + regs->tnpc = kcb->kprobe_orig_tnpc; } else { regs->tpc = (unsigned long) &p->ainsn.insn[0]; regs->tnpc = (unsigned long) &p->ainsn.insn[1]; @@ -117,19 +113,21 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe *p; void *addr = (void *) regs->tpc; int ret = 0; + struct kprobe_ctlblk *kcb; + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - * Disarm the probe we just hit, and ignore it. - */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if (kcb->kprobe_status == KPROBE_HIT_SS) { regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); - unlock_kprobes(); + kcb->kprobe_orig_tstate_pil); goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -138,25 +136,22 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; - kprobe_status = KPROBE_REENTER; - prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + prepare_singlestep(p, regs, kcb); return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) goto ss_probe; } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -171,14 +166,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - set_current_kprobe(p, regs); - kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) return 1; ss_probe: - prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + prepare_singlestep(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -260,11 +255,12 @@ static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn, * This function prepares to return from the post-single-step * breakpoint trap. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { u32 insn = p->ainsn.insn[0]; - regs->tpc = current_kprobe_orig_tnpc; + regs->tpc = kcb->kprobe_orig_tnpc; regs->tnpc = relbranch_fixup(insn, (unsigned long) p->addr, (unsigned long) &p->ainsn.insn[0], @@ -272,44 +268,48 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) retpc_fixup(regs, insn, (unsigned long) p->addr); regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); + kcb->kprobe_orig_tstate_pil); } static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); + resume_execution(cur, regs, kcb); /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -322,29 +322,30 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG_2: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, @@ -368,24 +369,21 @@ asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, } /* Jprobes support. */ -static struct pt_regs jprobe_saved_regs; -static struct pt_regs *jprobe_saved_regs_location; -static struct sparc_stackf jprobe_saved_stack; - int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs_location = regs; - memcpy(&jprobe_saved_regs, regs, sizeof(*regs)); + kcb->jprobe_saved_regs_location = regs; + memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs)); /* Save a whole stack frame, this gets arguments * pushed onto the stack after using up all the * arg registers. */ - memcpy(&jprobe_saved_stack, + memcpy(&(kcb->jprobe_saved_stack), (char *) (regs->u_regs[UREG_FP] + STACK_BIAS), - sizeof(jprobe_saved_stack)); + sizeof(kcb->jprobe_saved_stack)); regs->tpc = (unsigned long) jp->entry; regs->tnpc = ((unsigned long) jp->entry) + 0x4UL; @@ -396,7 +394,6 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); __asm__ __volatile__( ".globl jprobe_return_trap_instruction\n" "jprobe_return_trap_instruction:\n\t" @@ -410,14 +407,15 @@ extern void __show_regs(struct pt_regs * regs); int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u32 *addr = (u32 *) regs->tpc; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); if (addr == (u32 *) jprobe_return_trap_instruction) { - if (jprobe_saved_regs_location != regs) { + if (kcb->jprobe_saved_regs_location != regs) { printk("JPROBE: Current regs (%p) does not match " "saved regs (%p).\n", - regs, jprobe_saved_regs_location); + regs, kcb->jprobe_saved_regs_location); printk("JPROBE: Saved registers\n"); - __show_regs(jprobe_saved_regs_location); + __show_regs(kcb->jprobe_saved_regs_location); printk("JPROBE: Current registers\n"); __show_regs(regs); BUG(); @@ -426,12 +424,13 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) * first so that UREG_FP is the original one for * the stack frame restore. */ - memcpy(regs, &jprobe_saved_regs, sizeof(*regs)); + memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs)); memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS), - &jprobe_saved_stack, - sizeof(jprobe_saved_stack)); + &(kcb->jprobe_saved_stack), + sizeof(kcb->jprobe_saved_stack)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 7d10b0397091..02f9dec1d459 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -74,7 +74,9 @@ void cpu_idle(void) while (!need_resched()) barrier(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } @@ -83,21 +85,31 @@ void cpu_idle(void) /* * the idle loop on a UltraMultiPenguin... + * + * TIF_POLLING_NRFLAG is set because we do not sleep the cpu + * inside of the idler task, so an interrupt is not needed + * to get a clean fast response. + * + * XXX Reverify this assumption... -DaveM + * + * Addendum: We do want it to do something for the signal + * delivery case, we detect that by just seeing + * if we are trying to send this to an idler or not. */ -#define idle_me_harder() (cpu_data(smp_processor_id()).idle_volume += 1) -#define unidle_me() (cpu_data(smp_processor_id()).idle_volume = 0) void cpu_idle(void) { + cpuinfo_sparc *cpuinfo = &local_cpu_data(); set_thread_flag(TIF_POLLING_NRFLAG); + while(1) { if (need_resched()) { - unidle_me(); - clear_thread_flag(TIF_POLLING_NRFLAG); + cpuinfo->idle_volume = 0; + preempt_enable_no_resched(); schedule(); - set_thread_flag(TIF_POLLING_NRFLAG); + preempt_disable(); check_pgt_cache(); } - idle_me_harder(); + cpuinfo->idle_volume++; /* The store ordering is so that IRQ handlers on * other cpus see our increasing idleness for the buddy diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index e09ddf927655..96b825055668 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -790,7 +790,7 @@ static unsigned long sysio_irq_offsets[] = { #undef bogon -#define NUM_SYSIO_OFFSETS (sizeof(sysio_irq_offsets) / sizeof(sysio_irq_offsets[0])) +#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets) /* Convert Interrupt Mapping register pointer to associated * Interrupt Clear register pointer, SYSIO specific version. diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index c1f34237cdf2..48180531562f 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -154,6 +154,7 @@ int prom_callback(long *args) pud_t *pudp; pmd_t *pmdp; pte_t *ptep; + pte_t pte; for_each_process(p) { mm = p->mm; @@ -178,8 +179,9 @@ int prom_callback(long *args) * being called from inside OBP. */ ptep = pte_offset_map(pmdp, va); - if (pte_present(*ptep)) { - tte = pte_val(*ptep); + pte = *ptep; + if (pte_present(pte)) { + tte = pte_val(pte); res = PROM_TRUE; } pte_unmap(ptep); @@ -218,6 +220,7 @@ int prom_callback(long *args) pud_t *pudp; pmd_t *pmdp; pte_t *ptep; + pte_t pte; int error; if ((va >= LOW_OBP_ADDRESS) && (va < HI_OBP_ADDRESS)) { @@ -240,8 +243,9 @@ int prom_callback(long *args) * being called from inside OBP. */ ptep = pte_offset_kernel(pmdp, va); - if (pte_present(*ptep)) { - tte = pte_val(*ptep); + pte = *ptep; + if (pte_present(pte)) { + tte = pte_val(pte); res = PROM_TRUE; } goto done; @@ -583,6 +587,8 @@ extern void mmu_info(struct seq_file *); unsigned int dcache_parity_tl1_occurred; unsigned int icache_parity_tl1_occurred; +static int ncpus_probed; + static int show_cpuinfo(struct seq_file *m, void *__unused) { seq_printf(m, @@ -591,8 +597,8 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) "promlib\t\t: Version 3 Revision %d\n" "prom\t\t: %d.%d.%d\n" "type\t\t: sun4u\n" - "ncpus probed\t: %ld\n" - "ncpus active\t: %ld\n" + "ncpus probed\t: %d\n" + "ncpus active\t: %d\n" "D$ parity tl1\t: %u\n" "I$ parity tl1\t: %u\n" #ifndef CONFIG_SMP @@ -606,8 +612,8 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) prom_prev >> 16, (prom_prev >> 8) & 0xff, prom_prev & 0xff, - (long)num_possible_cpus(), - (long)num_online_cpus(), + ncpus_probed, + num_online_cpus(), dcache_parity_tl1_occurred, icache_parity_tl1_occurred #ifndef CONFIG_SMP @@ -673,6 +679,15 @@ static int __init topology_init(void) int i, err; err = -ENOMEM; + + /* Count the number of physically present processors in + * the machine, even on uniprocessor, so that /proc/cpuinfo + * output is consistent with 2.4.x + */ + ncpus_probed = 0; + while (!cpu_find_by_instance(ncpus_probed, NULL, NULL)) + ncpus_probed++; + for (i = 0; i < NR_CPUS; i++) { if (cpu_possible(i)) { struct cpu *p = kmalloc(sizeof(*p), GFP_KERNEL); diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c index aecccd0df1d1..009a86e5ded4 100644 --- a/arch/sparc64/kernel/signal32.c +++ b/arch/sparc64/kernel/signal32.c @@ -863,6 +863,7 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, pud_t *pudp = pud_offset(pgdp, address); pmd_t *pmdp = pmd_offset(pudp, address); pte_t *ptep; + pte_t pte; regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2); @@ -873,9 +874,10 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, preempt_disable(); ptep = pte_offset_map(pmdp, address); - if (pte_present(*ptep)) { + pte = *ptep; + if (pte_present(pte)) { unsigned long page = (unsigned long) - page_address(pte_page(*ptep)); + page_address(pte_page(pte)); wmb(); __asm__ __volatile__("flush %0 + %1" diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index b137fd63f5e1..6efc03df51c3 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -39,7 +39,6 @@ #include <asm/starfire.h> #include <asm/tlb.h> -extern int linux_num_cpus; extern void calibrate_delay(void); /* Please don't make this stuff initdata!!! --DaveM */ @@ -168,6 +167,9 @@ void __init smp_callin(void) rmb(); cpu_set(cpuid, cpu_online_map); + + /* idle thread is expected to have preempt disabled */ + preempt_disable(); } void cpu_panic(void) @@ -839,43 +841,29 @@ void smp_flush_tlb_all(void) * questionable (in theory the big win for threads is the massive sharing of * address space state across processors). */ + +/* This currently is only used by the hugetlb arch pre-fault + * hook on UltraSPARC-III+ and later when changing the pagesize + * bits of the context register for an address space. + */ void smp_flush_tlb_mm(struct mm_struct *mm) { - /* - * This code is called from two places, dup_mmap and exit_mmap. In the - * former case, we really need a flush. In the later case, the callers - * are single threaded exec_mmap (really need a flush), multithreaded - * exec_mmap case (do not need to flush, since the caller gets a new - * context via activate_mm), and all other callers of mmput() whence - * the flush can be optimized since the associated threads are dead and - * the mm is being torn down (__exit_mm and other mmput callers) or the - * owning thread is dissociating itself from the mm. The - * (atomic_read(&mm->mm_users) == 0) check ensures real work is done - * for single thread exec and dup_mmap cases. An alternate check might - * have been (current->mm != mm). - * Kanoj Sarcar - */ - if (atomic_read(&mm->mm_users) == 0) - return; - - { - u32 ctx = CTX_HWBITS(mm->context); - int cpu = get_cpu(); + u32 ctx = CTX_HWBITS(mm->context); + int cpu = get_cpu(); - if (atomic_read(&mm->mm_users) == 1) { - mm->cpu_vm_mask = cpumask_of_cpu(cpu); - goto local_flush_and_out; - } + if (atomic_read(&mm->mm_users) == 1) { + mm->cpu_vm_mask = cpumask_of_cpu(cpu); + goto local_flush_and_out; + } - smp_cross_call_masked(&xcall_flush_tlb_mm, - ctx, 0, 0, - mm->cpu_vm_mask); + smp_cross_call_masked(&xcall_flush_tlb_mm, + ctx, 0, 0, + mm->cpu_vm_mask); - local_flush_and_out: - __flush_tlb_mm(ctx, SECONDARY_CONTEXT); +local_flush_and_out: + __flush_tlb_mm(ctx, SECONDARY_CONTEXT); - put_cpu(); - } + put_cpu(); } void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long *vaddrs) @@ -883,34 +871,13 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long u32 ctx = CTX_HWBITS(mm->context); int cpu = get_cpu(); - if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1) { + if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1) mm->cpu_vm_mask = cpumask_of_cpu(cpu); - goto local_flush_and_out; - } else { - /* This optimization is not valid. Normally - * we will be holding the page_table_lock, but - * there is an exception which is copy_page_range() - * when forking. The lock is held during the individual - * page table updates in the parent, but not at the - * top level, which is where we are invoked. - */ - if (0) { - cpumask_t this_cpu_mask = cpumask_of_cpu(cpu); - - /* By virtue of running under the mm->page_table_lock, - * and mmu_context.h:switch_mm doing the same, the - * following operation is safe. - */ - if (cpus_equal(mm->cpu_vm_mask, this_cpu_mask)) - goto local_flush_and_out; - } - } - - smp_cross_call_masked(&xcall_flush_tlb_pending, - ctx, nr, (unsigned long) vaddrs, - mm->cpu_vm_mask); + else + smp_cross_call_masked(&xcall_flush_tlb_pending, + ctx, nr, (unsigned long) vaddrs, + mm->cpu_vm_mask); -local_flush_and_out: __flush_tlb_pending(ctx, nr, vaddrs); put_cpu(); @@ -1184,20 +1151,9 @@ void __init smp_cpus_done(unsigned int max_cpus) (bogosum/(5000/HZ))%100); } -/* This needn't do anything as we do not sleep the cpu - * inside of the idler task, so an interrupt is not needed - * to get a clean fast response. - * - * XXX Reverify this assumption... -DaveM - * - * Addendum: We do want it to do something for the signal - * delivery case, we detect that by just seeing - * if we are trying to send this to an idler or not. - */ void smp_send_reschedule(int cpu) { - if (cpu_data(cpu).idle_volume == 0) - smp_receive_signal(cpu); + smp_receive_signal(cpu); } /* This is a nop because we capture all other cpus diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c index 7654b8a7f03a..3f619ead22cc 100644 --- a/arch/sparc64/kernel/sunos_ioctl32.c +++ b/arch/sparc64/kernel/sunos_ioctl32.c @@ -24,7 +24,6 @@ #include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/compat.h> -#include <asm/kbio.h> #define SUNOS_NR_OPEN 256 diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 38c5525087a2..459c8fbe02b4 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -60,17 +60,6 @@ static void __iomem *mstk48t59_regs; static int set_rtc_mmss(unsigned long); -static __init unsigned long dummy_get_tick(void) -{ - return 0; -} - -static __initdata struct sparc64_tick_ops dummy_tick_ops = { - .get_tick = dummy_get_tick, -}; - -struct sparc64_tick_ops *tick_ops __read_mostly = &dummy_tick_ops; - #define TICK_PRIV_BIT (1UL << 63) #ifdef CONFIG_SMP @@ -200,6 +189,8 @@ static struct sparc64_tick_ops tick_operations __read_mostly = { .softint_mask = 1UL << 0, }; +struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations; + static void stick_init_tick(unsigned long offset) { tick_disable_protection(); diff --git a/arch/sparc64/kernel/us2e_cpufreq.c b/arch/sparc64/kernel/us2e_cpufreq.c index 686e526bec04..b35dc8dc995a 100644 --- a/arch/sparc64/kernel/us2e_cpufreq.c +++ b/arch/sparc64/kernel/us2e_cpufreq.c @@ -388,10 +388,8 @@ err_out: kfree(driver); cpufreq_us2e_driver = NULL; } - if (us2e_freq_table) { - kfree(us2e_freq_table); - us2e_freq_table = NULL; - } + kfree(us2e_freq_table); + us2e_freq_table = NULL; return ret; } @@ -402,7 +400,6 @@ static void __exit us2e_freq_exit(void) { if (cpufreq_us2e_driver) { cpufreq_unregister_driver(cpufreq_us2e_driver); - kfree(cpufreq_us2e_driver); cpufreq_us2e_driver = NULL; kfree(us2e_freq_table); diff --git a/arch/sparc64/kernel/us3_cpufreq.c b/arch/sparc64/kernel/us3_cpufreq.c index 0340041f6143..6d1f9a3c464f 100644 --- a/arch/sparc64/kernel/us3_cpufreq.c +++ b/arch/sparc64/kernel/us3_cpufreq.c @@ -249,10 +249,8 @@ err_out: kfree(driver); cpufreq_us3_driver = NULL; } - if (us3_freq_table) { - kfree(us3_freq_table); - us3_freq_table = NULL; - } + kfree(us3_freq_table); + us3_freq_table = NULL; return ret; } @@ -263,7 +261,6 @@ static void __exit us3_freq_exit(void) { if (cpufreq_us3_driver) { cpufreq_unregister_driver(cpufreq_us3_driver); - kfree(cpufreq_us3_driver); cpufreq_us3_driver = NULL; kfree(us3_freq_table); diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 31fbc67719a1..6f0539aa44d0 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -30,8 +30,6 @@ #include <asm/sections.h> #include <asm/kdebug.h> -#define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0])) - /* * To debug kernel to catch accesses to certain virtual/physical addresses. * Mode = 0 selects physical watchpoints, mode = 1 selects virtual watchpoints. @@ -109,7 +107,7 @@ static void bad_kernel_pc(struct pt_regs *regs) * this. Additionally, to prevent kswapd from ripping ptes from * under us, raise interrupts around the time that we look at the * pte, kswapd will have to wait to get his smp ipi response from - * us. This saves us having to get page_table_lock. + * us. vmtruncate likewise. This saves us having to get pte lock. */ static unsigned int get_user_insn(unsigned long tpc) { diff --git a/arch/sparc64/oprofile/Kconfig b/arch/sparc64/oprofile/Kconfig index 5ade19801b97..d8a84088471a 100644 --- a/arch/sparc64/oprofile/Kconfig +++ b/arch/sparc64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/um/Kconfig b/arch/um/Kconfig index cd06ed7d842d..563301fe5df8 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -7,7 +7,6 @@ config UML bool default y -# XXX: does UM have a mmu/swap? config MMU bool default y @@ -36,12 +35,6 @@ config IRQ_RELEASE_METHOD bool default y -menu "Host processor type and features" - -source "arch/i386/Kconfig.cpu" - -endmenu - menu "UML-specific options" config MODE_TT @@ -65,6 +58,30 @@ config STATIC_LINK chroot, and you disable CONFIG_MODE_TT, you probably want to say Y here. +config HOST_2G_2G + bool "2G/2G host address space split" + default n + depends on MODE_TT + help + This is needed when the host on which you run has a 2G/2G memory + split, instead of the customary 3G/1G. + + Note that to enable such a host + configuration, which makes sense only in some cases, you need special + host patches. + + So, if you do not know what to do here, say 'N'. + +config KERNEL_HALF_GIGS + int "Kernel address space size (in .5G units)" + default "1" + depends on MODE_TT + help + This determines the amount of address space that UML will allocate for + its own, measured in half Gigabyte units. The default is 1. + Change this only if you need to boot UML with an unusually large amount + of physical memory. + config MODE_SKAS bool "Separate Kernel Address Space support" default y @@ -182,23 +199,11 @@ config MAGIC_SYSRQ The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y unless you really know what this hack does. -config HOST_2G_2G - bool "2G/2G host address space split" - default n - help - This is needed when the host on which you run has a 2G/2G memory - split, instead of the customary 3G/1G. - - Note that to enable such a host - configuration, which makes sense only in some cases, you need special - host patches. - - So, if you do not know what to do here, say 'N'. - config SMP bool "Symmetric multi-processing support (EXPERIMENTAL)" default n - depends on (MODE_TT && EXPERIMENTAL && !SMP_BROKEN) || (BROKEN && SMP_BROKEN) + #SMP_BROKEN is for x86_64. + depends on MODE_TT && EXPERIMENTAL && (!SMP_BROKEN || (BROKEN && SMP_BROKEN)) help This option enables UML SMP support. It is NOT related to having a real SMP box. Not directly, at least. @@ -241,15 +246,6 @@ config NEST_LEVEL set to the host's CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS. Only change this if you are running nested UMLs. -config KERNEL_HALF_GIGS - int "Kernel address space size (in .5G units)" - default "1" - help - This determines the amount of address space that UML will allocate for - its own, measured in half Gigabyte units. The default is 1. - Change this only if you need to boot UML with an unusually large amount - of physical memory. - config HIGHMEM bool "Highmem support" depends on !64BIT diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index 5d92cacd56c6..c71b39a677aa 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -1,3 +1,9 @@ +menu "Host processor type and features" + +source "arch/i386/Kconfig.cpu" + +endmenu + config UML_X86 bool default y @@ -42,7 +48,3 @@ config ARCH_HAS_SC_SIGNALS config ARCH_REUSE_HOST_VSYSCALL_AREA bool default y - -config X86_CMPXCHG - bool - default y diff --git a/arch/um/Makefile b/arch/um/Makefile index e1ffad224605..e55d32e903bc 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -60,7 +60,7 @@ AFLAGS += $(ARCH_INCLUDE) USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ - $(MODE_INCLUDE) + $(MODE_INCLUDE) -D_FILE_OFFSET_BITS=64 # -Derrno=kernel_errno - This turns all kernel references to errno into # kernel_errno to separate them from the libc errno. This allows -fno-common diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index aef7c50f8e13..7a0e04e34bf9 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -17,8 +17,6 @@ ifeq ("$(origin SUBARCH)", "command line") ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)") CFLAGS += $(call cc-option,-m32) USER_CFLAGS += $(call cc-option,-m32) -HOSTCFLAGS += $(call cc-option,-m32) -HOSTLDFLAGS += $(call cc-option,-m32) AFLAGS += $(call cc-option,-m32) LINK-y += $(call cc-option,-m32) UML_OBJCOPYFLAGS += -F $(ELF_FORMAT) @@ -37,4 +35,3 @@ cflags-y += $(call cc-option,-mpreferred-stack-boundary=2) CFLAGS += $(cflags-y) USER_CFLAGS += $(cflags-y) - diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 16e7dc89f61d..5b58fad45290 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -89,8 +89,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data) return(-EIO); } -static int not_configged_console_write(int fd, const char *buf, int len, - void *data) +static int not_configged_console_write(int fd, const char *buf, int len) { my_puts("Using a channel type which is configured out of " "UML\n"); @@ -299,7 +298,7 @@ int console_write_chan(struct list_head *chans, const char *buf, int len) chan = list_entry(ele, struct chan, list); if(!chan->output || (chan->ops->console_write == NULL)) continue; - n = chan->ops->console_write(chan->fd, buf, len, chan->data); + n = chan->ops->console_write(chan->fd, buf, len); if(chan->primary) ret = n; } return(ret); diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index de3bce71aeb3..5d50d4a44abf 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -16,12 +16,11 @@ #include "user_util.h" #include "chan_user.h" #include "user.h" -#include "helper.h" #include "os.h" #include "choose-mode.h" #include "mode.h" -int generic_console_write(int fd, const char *buf, int n, void *unused) +int generic_console_write(int fd, const char *buf, int n) { struct termios save, new; int err; diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c index c1b03f7c1daa..1bb085b2824d 100644 --- a/arch/um/drivers/daemon_user.c +++ b/arch/um/drivers/daemon_user.c @@ -98,7 +98,7 @@ static int connect_to_switch(struct daemon_data *pri) printk("daemon_open : control setup request failed, err = %d\n", -n); err = -ENOTCONN; - goto out; + goto out_free; } n = os_read_file(pri->control, sun, sizeof(*sun)); @@ -106,12 +106,14 @@ static int connect_to_switch(struct daemon_data *pri) printk("daemon_open : read of data socket failed, err = %d\n", -n); err = -ENOTCONN; - goto out_close; + goto out_free; } pri->data_addr = sun; return(fd); + out_free: + kfree(sun); out_close: os_close_file(fd); out: diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c index f0b888f66e05..3296e86a03a5 100644 --- a/arch/um/drivers/fd.c +++ b/arch/um/drivers/fd.c @@ -76,13 +76,6 @@ static void fd_close(int fd, void *d) } } -static int fd_console_write(int fd, const char *buf, int n, void *d) -{ - struct fd_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops fd_ops = { .type = "fd", .init = fd_init, @@ -90,7 +83,7 @@ struct chan_ops fd_ops = { .close = fd_close, .read = generic_read, .write = generic_write, - .console_write = fd_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = generic_free, .winch = 1, diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index 147ec19f6bb9..49acb2badf32 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -46,7 +46,6 @@ #include <linux/smp_lock.h> #include <linux/init.h> #include <asm/uaccess.h> -#include "helper.h" #include "mconsole.h" MODULE_LICENSE("GPL"); diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c index d934181b8d4c..def013b5a3c7 100644 --- a/arch/um/drivers/harddog_user.c +++ b/arch/um/drivers/harddog_user.c @@ -8,7 +8,6 @@ #include <errno.h> #include "user_util.h" #include "user.h" -#include "helper.h" #include "mconsole.h" #include "os.h" #include "choose-mode.h" diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index 5db136e2651c..afe85bfa66e0 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -54,7 +54,7 @@ static int mcast_open(void *data) struct mcast_data *pri = data; struct sockaddr_in *sin = pri->mcast_addr; struct ip_mreq mreq; - int fd, yes = 1, err = 0; + int fd, yes = 1, err = -EINVAL; if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) @@ -63,40 +63,40 @@ static int mcast_open(void *data) fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0){ + err = -errno; printk("mcast_open : data socket failed, errno = %d\n", errno); - err = -errno; goto out; } if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { + err = -errno; printk("mcast_open: SO_REUSEADDR failed, errno = %d\n", errno); - err = -errno; goto out_close; } /* set ttl according to config */ if (setsockopt(fd, SOL_IP, IP_MULTICAST_TTL, &pri->ttl, sizeof(pri->ttl)) < 0) { + err = -errno; printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n", errno); - err = -errno; goto out_close; } /* set LOOP, so data does get fed back to local sockets */ if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) { + err = -errno; printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n", errno); - err = -errno; goto out_close; } /* bind socket to mcast address */ if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) { - printk("mcast_open : data bind failed, errno = %d\n", errno); err = -errno; + printk("mcast_open : data bind failed, errno = %d\n", errno); goto out_close; } @@ -105,22 +105,22 @@ static int mcast_open(void *data) mreq.imr_interface.s_addr = 0; if (setsockopt(fd, SOL_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)) < 0) { + err = -errno; printk("mcast_open: IP_ADD_MEMBERSHIP failed, error = %d\n", errno); printk("There appears not to be a multicast-capable network " "interface on the host.\n"); printk("eth0 should be configured in order to use the " "multicast transport.\n"); - err = -errno; - goto out_close; + goto out_close; } return fd; out_close: - os_close_file(fd); + os_close_file(fd); out: - return err; + return err; } static void mcast_close(int fd, void *data) diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 721e2601a75d..84c73a300acb 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -96,7 +96,6 @@ irqreturn_t uml_net_interrupt(int irq, void *dev_id, struct pt_regs *regs) static int uml_net_open(struct net_device *dev) { struct uml_net_private *lp = dev->priv; - char addr[sizeof("255.255.255.255\0")]; int err; spin_lock(&lp->lock); @@ -107,7 +106,7 @@ static int uml_net_open(struct net_device *dev) } if(!lp->have_mac){ - dev_ip_addr(dev, addr, &lp->mac[2]); + dev_ip_addr(dev, &lp->mac[2]); set_ether_mac(dev, lp->mac); } @@ -244,34 +243,18 @@ static int uml_net_change_mtu(struct net_device *dev, int new_mtu) return err; } -static int uml_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - static const struct ethtool_drvinfo info = { - .cmd = ETHTOOL_GDRVINFO, - .driver = DRIVER_NAME, - .version = "42", - }; - void *useraddr; - u32 ethcmd; - - switch (cmd) { - case SIOCETHTOOL: - useraddr = ifr->ifr_data; - if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) - return -EFAULT; - switch (ethcmd) { - case ETHTOOL_GDRVINFO: - if (copy_to_user(useraddr, &info, sizeof(info))) - return -EFAULT; - return 0; - default: - return -EOPNOTSUPP; - } - default: - return -EINVAL; - } +static void uml_net_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRIVER_NAME); + strcpy(info->version, "42"); } +static struct ethtool_ops uml_net_ethtool_ops = { + .get_drvinfo = uml_net_get_drvinfo, + .get_link = ethtool_op_get_link, +}; + void uml_net_user_timer_expire(unsigned long _conn) { #ifdef undef @@ -285,9 +268,10 @@ void uml_net_user_timer_expire(unsigned long _conn) static DEFINE_SPINLOCK(devices_lock); static struct list_head devices = LIST_HEAD_INIT(devices); -static struct device_driver uml_net_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver uml_net_driver = { + .driver = { + .name = DRIVER_NAME, + }, }; static int driver_registered; @@ -334,7 +318,7 @@ static int eth_configure(int n, void *init, char *mac, /* sysfs register */ if (!driver_registered) { - driver_register(¨_net_driver); + platform_driver_register(¨_net_driver); driver_registered = 1; } device->pdev.id = n; @@ -360,7 +344,7 @@ static int eth_configure(int n, void *init, char *mac, dev->tx_timeout = uml_net_tx_timeout; dev->set_mac_address = uml_net_set_mac; dev->change_mtu = uml_net_change_mtu; - dev->do_ioctl = uml_net_ioctl; + dev->ethtool_ops = ¨_net_ethtool_ops; dev->watchdog_timeo = (HZ >> 1); dev->irq = UM_ETH_IRQ; @@ -664,8 +648,6 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr) { struct in_ifaddr *ifa = ptr; - u32 addr = ifa->ifa_address; - u32 netmask = ifa->ifa_mask; struct net_device *dev = ifa->ifa_dev->dev; struct uml_net_private *lp; void (*proc)(unsigned char *, unsigned char *, void *); @@ -685,14 +667,8 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, break; } if(proc != NULL){ - addr_buf[0] = addr & 0xff; - addr_buf[1] = (addr >> 8) & 0xff; - addr_buf[2] = (addr >> 16) & 0xff; - addr_buf[3] = addr >> 24; - netmask_buf[0] = netmask & 0xff; - netmask_buf[1] = (netmask >> 8) & 0xff; - netmask_buf[2] = (netmask >> 16) & 0xff; - netmask_buf[3] = netmask >> 24; + memcpy(addr_buf, &ifa->ifa_address, sizeof(addr_buf)); + memcpy(netmask_buf, &ifa->ifa_mask, sizeof(netmask_buf)); (*proc)(addr_buf, netmask_buf, &lp->user); } return(NOTIFY_DONE); @@ -774,27 +750,18 @@ int setup_etheraddr(char *str, unsigned char *addr) return(1); } -void dev_ip_addr(void *d, char *buf, char *bin_buf) +void dev_ip_addr(void *d, unsigned char *bin_buf) { struct net_device *dev = d; struct in_device *ip = dev->ip_ptr; struct in_ifaddr *in; - u32 addr; if((ip == NULL) || ((in = ip->ifa_list) == NULL)){ printk(KERN_WARNING "dev_ip_addr - device not assigned an " "IP address\n"); return; } - addr = in->ifa_address; - sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff, - (addr >> 16) & 0xff, addr >> 24); - if(bin_buf){ - bin_buf[0] = addr & 0xff; - bin_buf[1] = (addr >> 8) & 0xff; - bin_buf[2] = (addr >> 16) & 0xff; - bin_buf[3] = addr >> 24; - } + memcpy(bin_buf, &in->ifa_address, sizeof(in->ifa_address)); } void set_ether_mac(void *d, unsigned char *addr) @@ -829,14 +796,8 @@ void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, if(ip == NULL) return; in = ip->ifa_list; while(in != NULL){ - address[0] = in->ifa_address & 0xff; - address[1] = (in->ifa_address >> 8) & 0xff; - address[2] = (in->ifa_address >> 16) & 0xff; - address[3] = in->ifa_address >> 24; - netmask[0] = in->ifa_mask & 0xff; - netmask[1] = (in->ifa_mask >> 8) & 0xff; - netmask[2] = (in->ifa_mask >> 16) & 0xff; - netmask[3] = in->ifa_mask >> 24; + memcpy(address, &in->ifa_address, sizeof(address)); + memcpy(netmask, &in->ifa_mask, sizeof(netmask)); (*cb)(address, netmask, arg); in = in->ifa_next; } diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 3730d4f12713..098fa65981ab 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -16,7 +16,6 @@ #include "user_util.h" #include "kern_util.h" #include "net_user.h" -#include "helper.h" #include "os.h" int tap_open_common(void *dev, char *gate_addr) diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index 14dd2002d2da..c43e8bb32502 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -18,7 +18,6 @@ #include "user.h" #include "chan_user.h" #include "port.h" -#include "helper.h" #include "os.h" struct port_chan { @@ -101,13 +100,6 @@ static void port_close(int fd, void *d) os_close_file(fd); } -static int port_console_write(int fd, const char *buf, int n, void *d) -{ - struct port_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops port_ops = { .type = "port", .init = port_init, @@ -115,7 +107,7 @@ struct chan_ops port_ops = { .close = port_close, .read = generic_read, .write = generic_write, - .console_write = port_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = port_free, .winch = 1, diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c index 0306a1b215b7..1c555c38de4d 100644 --- a/arch/um/drivers/pty.c +++ b/arch/um/drivers/pty.c @@ -118,13 +118,6 @@ static int pty_open(int input, int output, int primary, void *d, return(fd); } -static int pty_console_write(int fd, const char *buf, int n, void *d) -{ - struct pty_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops pty_ops = { .type = "pty", .init = pty_chan_init, @@ -132,7 +125,7 @@ struct chan_ops pty_ops = { .close = generic_close, .read = generic_read, .write = generic_write, - .console_write = pty_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = generic_free, .winch = 0, @@ -145,7 +138,7 @@ struct chan_ops pts_ops = { .close = generic_close, .read = generic_read, .write = generic_write, - .console_write = pty_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = generic_free, .winch = 0, diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index f9e22198e011..ba471f5864a6 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -58,10 +58,8 @@ static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size, if (filp->f_flags & O_NONBLOCK) return ret ? : -EAGAIN; - if(need_resched()){ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } + if(need_resched()) + schedule_timeout_interruptible(1); } else return n; if (signal_pending (current)) diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 71af444e591f..89fbec185cc1 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -14,7 +14,6 @@ #include "net_user.h" #include "slip.h" #include "slip_common.h" -#include "helper.h" #include "os.h" void slip_user_init(void *data, void *dev) diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index 8d91f663d82c..b94c66114bc8 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -13,7 +13,6 @@ #include "net_user.h" #include "slirp.h" #include "slip_common.h" -#include "helper.h" #include "os.h" void slirp_user_init(void *data, void *dev) diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c index 6fbb670ee274..94c9265a4f2c 100644 --- a/arch/um/drivers/tty.c +++ b/arch/um/drivers/tty.c @@ -60,13 +60,6 @@ static int tty_open(int input, int output, int primary, void *d, return(fd); } -static int tty_console_write(int fd, const char *buf, int n, void *d) -{ - struct tty_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops tty_ops = { .type = "tty", .init = tty_chan_init, @@ -74,7 +67,7 @@ struct chan_ops tty_ops = { .close = generic_close, .read = generic_read, .write = generic_write, - .console_write = tty_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = generic_free, .winch = 0, diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index b2c86257b0f8..93898917cbe5 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -823,9 +823,10 @@ static int ubd_mc_init(void) __initcall(ubd_mc_init); -static struct device_driver ubd_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver ubd_driver = { + .driver = { + .name = DRIVER_NAME, + }, }; int ubd_init(void) @@ -850,7 +851,7 @@ int ubd_init(void) if (register_blkdev(fake_major, "ubd")) return -1; } - driver_register(&ubd_driver); + platform_driver_register(&ubd_driver); for (i = 0; i < MAX_DEV; i++) ubd_add(i); return 0; diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 90e0e5ff451e..aaa636661043 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -14,7 +14,6 @@ #include <sys/socket.h> #include "kern_util.h" #include "chan_user.h" -#include "helper.h" #include "user_util.h" #include "user.h" #include "os.h" @@ -195,13 +194,6 @@ static void xterm_free(void *d) free(d); } -static int xterm_console_write(int fd, const char *buf, int n, void *d) -{ - struct xterm_chan *data = d; - - return(generic_console_write(fd, buf, n, &data->tt)); -} - struct chan_ops xterm_ops = { .type = "xterm", .init = xterm_init, @@ -209,7 +201,7 @@ struct chan_ops xterm_ops = { .close = xterm_close, .read = generic_read, .write = generic_write, - .console_write = xterm_console_write, + .console_write = generic_console_write, .window_size = generic_window_size, .free = xterm_free, .winch = 1, diff --git a/arch/um/include/chan_user.h b/arch/um/include/chan_user.h index f77d9aa4c164..659bb3cac32f 100644 --- a/arch/um/include/chan_user.h +++ b/arch/um/include/chan_user.h @@ -25,7 +25,7 @@ struct chan_ops { void (*close)(int, void *); int (*read)(int, char *, void *); int (*write)(int, const char *, int, void *); - int (*console_write)(int, const char *, int, void *); + int (*console_write)(int, const char *, int); int (*window_size)(int, void *, unsigned short *, unsigned short *); void (*free)(void *); int winch; @@ -37,7 +37,7 @@ extern struct chan_ops fd_ops, null_ops, port_ops, pts_ops, pty_ops, tty_ops, extern void generic_close(int fd, void *unused); extern int generic_read(int fd, char *c_out, void *unused); extern int generic_write(int fd, const char *buf, int n, void *unused); -extern int generic_console_write(int fd, const char *buf, int n, void *state); +extern int generic_console_write(int fd, const char *buf, int n); extern int generic_window_size(int fd, void *unused, unsigned short *rows_out, unsigned short *cols_out); extern void generic_free(void *data); diff --git a/arch/um/include/helper.h b/arch/um/include/helper.h deleted file mode 100644 index 162ac31192fd..000000000000 --- a/arch/um/include/helper.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __HELPER_H__ -#define __HELPER_H__ - -extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, - unsigned long *stack_out); -extern int run_helper_thread(int (*proc)(void *), void *arg, - unsigned int flags, unsigned long *stack_out, - int stack_order); -extern int helper_wait(int pid); - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/mem_user.h b/arch/um/include/mem_user.h index 9fef4123a65a..a1064c5823bf 100644 --- a/arch/um/include/mem_user.h +++ b/arch/um/include/mem_user.h @@ -57,7 +57,7 @@ extern int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem); extern unsigned long get_vm(unsigned long len); extern void setup_physmem(unsigned long start, unsigned long usable, - unsigned long len, unsigned long highmem); + unsigned long len, unsigned long long highmem); extern void add_iomem(char *name, int fd, unsigned long size); extern unsigned long phys_offset(unsigned long phys); extern void unmap_physmem(void); diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h index 89885a77a771..800c403920bc 100644 --- a/arch/um/include/net_user.h +++ b/arch/um/include/net_user.h @@ -25,7 +25,7 @@ struct net_user_info { }; extern void ether_user_init(void *data, void *dev); -extern void dev_ip_addr(void *d, char *buf, char *bin_buf); +extern void dev_ip_addr(void *d, unsigned char *bin_buf); extern void set_ether_mac(void *d, unsigned char *addr); extern void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, void *), diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 2e58e304b8be..2cccfa5b8ab5 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -167,7 +167,7 @@ extern int can_do_skas(void); #endif /* mem.c */ -extern int create_mem_file(unsigned long len); +extern int create_mem_file(unsigned long long len); /* process.c */ extern unsigned long os_process_pc(int pid); @@ -199,6 +199,20 @@ extern void forward_pending_sigio(int target); extern int start_fork_tramp(void *arg, unsigned long temp_stack, int clone_flags, int (*tramp)(void *)); +/* uaccess.c */ +extern unsigned long __do_user_copy(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher, + void (*op)(void *to, const void *from, + int n), int *faulted_out); + +/* helper.c */ +extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, + unsigned long *stack_out); +extern int run_helper_thread(int (*proc)(void *), void *arg, + unsigned int flags, unsigned long *stack_out, + int stack_order); +extern int helper_wait(int pid); + #endif /* diff --git a/arch/um/include/sysdep-i386/stub.h b/arch/um/include/sysdep-i386/stub.h index d3699fe1c613..a49ceb199ee5 100644 --- a/arch/um/include/sysdep-i386/stub.h +++ b/arch/um/include/sysdep-i386/stub.h @@ -16,45 +16,69 @@ extern void stub_clone_handler(void); #define STUB_MMAP_NR __NR_mmap2 #define MMAP_OFFSET(o) ((o) >> PAGE_SHIFT) +static inline long stub_syscall1(long syscall, long arg1) +{ + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1)); + + return ret; +} + static inline long stub_syscall2(long syscall, long arg1, long arg2) { long ret; - __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); - __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); - __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); - __asm__("int $0x80;" : : : "%eax"); - __asm__ __volatile__("movl %%eax, %0; " : "=g" (ret) :); - return(ret); + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2)); + + return ret; } static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) { - __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); - return(stub_syscall2(syscall, arg1, arg2)); + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3)); + + return ret; } static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, long arg4) { - __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); - return(stub_syscall3(syscall, arg1, arg2, arg3)); + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3), "S" (arg4)); + + return ret; +} + +static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5) +{ + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5)); + + return ret; } static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6) { long ret; - __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); - __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); - __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); - __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); - __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); - __asm__("movl %0, %%edi; " : : "g" (arg5) : "%edi"); - __asm__ __volatile__("pushl %%ebp ; movl %1, %%ebp; " - "int $0x80; popl %%ebp ; " - "movl %%eax, %0; " : "=g" (ret) : "g" (arg6) : "%eax"); - return(ret); + + __asm__ volatile ("push %%ebp ; movl %%eax,%%ebp ; movl %1,%%eax ; " + "int $0x80 ; pop %%ebp" + : "=a" (ret) + : "g" (syscall), "b" (arg1), "c" (arg2), "d" (arg3), + "S" (arg4), "D" (arg5), "0" (arg6)); + + return ret; } static inline void trap_myself(void) diff --git a/arch/um/include/sysdep-x86_64/stub.h b/arch/um/include/sysdep-x86_64/stub.h index f599058d8263..2bd6e7a97286 100644 --- a/arch/um/include/sysdep-x86_64/stub.h +++ b/arch/um/include/sysdep-x86_64/stub.h @@ -17,37 +17,72 @@ extern void stub_clone_handler(void); #define STUB_MMAP_NR __NR_mmap #define MMAP_OFFSET(o) (o) +#define __syscall_clobber "r11","rcx","memory" +#define __syscall "syscall" + static inline long stub_syscall2(long syscall, long arg1, long arg2) { long ret; - __asm__("movq %0, %%rsi; " : : "g" (arg2) : "%rsi"); - __asm__("movq %0, %%rdi; " : : "g" (arg1) : "%rdi"); - __asm__("movq %0, %%rax; " : : "g" (syscall) : "%rax"); - __asm__("syscall;" : : : "%rax", "%r11", "%rcx"); - __asm__ __volatile__("movq %%rax, %0; " : "=g" (ret) :); - return(ret); + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber ); + + return ret; } static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) { - __asm__("movq %0, %%rdx; " : : "g" (arg3) : "%rdx"); - return(stub_syscall2(syscall, arg1, arg2)); + long ret; + + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3) + : __syscall_clobber ); + + return ret; } static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, long arg4) { - __asm__("movq %0, %%r10; " : : "g" (arg4) : "%r10"); - return(stub_syscall3(syscall, arg1, arg2, arg3)); + long ret; + + __asm__ volatile ("movq %5,%%r10 ; " __syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4) + : __syscall_clobber, "r10" ); + + return ret; +} + +static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5) +{ + long ret; + + __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4), "g" (arg5) + : __syscall_clobber, "r10", "r8" ); + + return ret; } static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6) { - __asm__("movq %0, %%r9; " : : "g" (arg6) : "%r9"); - __asm__("movq %0, %%r8; " : : "g" (arg5) : "%r8"); - return(stub_syscall4(syscall, arg1, arg2, arg3, arg4)); + long ret; + + __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " + "movq %7, %%r9; " __syscall : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4), "g" (arg5), "g" (arg6) + : __syscall_clobber, "r10", "r8", "r9" ); + + return ret; } static inline void trap_myself(void) diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h index 84c0868cd561..f8760a3f43b0 100644 --- a/arch/um/include/um_uaccess.h +++ b/arch/um/include/um_uaccess.h @@ -17,8 +17,25 @@ #include "uaccess-skas.h" #endif +#define __under_task_size(addr, size) \ + (((unsigned long) (addr) < TASK_SIZE) && \ + (((unsigned long) (addr) + (size)) < TASK_SIZE)) + +#define __access_ok_vsyscall(type, addr, size) \ + ((type == VERIFY_READ) && \ + ((unsigned long) (addr) >= FIXADDR_USER_START) && \ + ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \ + ((unsigned long) (addr) + (size) >= (unsigned long)(addr))) + +#define __addr_range_nowrap(addr, size) \ + ((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) + #define access_ok(type, addr, size) \ - CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size) + (__addr_range_nowrap(addr, size) && \ + (__under_task_size(addr, size) || \ + __access_ok_vsyscall(type, addr, size) || \ + segment_eq(get_fs(), KERNEL_DS) || \ + CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size))) static inline int copy_from_user(void *to, const void __user *from, int n) { diff --git a/arch/um/include/uml_uaccess.h b/arch/um/include/uml_uaccess.h index f77eb6428453..c0df11d06f5e 100644 --- a/arch/um/include/uml_uaccess.h +++ b/arch/um/include/uml_uaccess.h @@ -8,10 +8,6 @@ extern int __do_copy_to_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher); -extern unsigned long __do_user_copy(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher, - void (*op)(void *to, const void *from, - int n), int *faulted_out); void __do_copy(void *to, const void *from, int n); #endif diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 1a0001b3850c..3de9d21e36bf 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,10 +7,10 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec_kern.o exitcode.o \ - helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o physmem.o \ + init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \ process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \ - time_kern.o tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o \ + time_kern.o tlb.o trap_kern.o trap_user.o uaccess.o um_arch.o \ umid.o user_util.o obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o @@ -24,8 +24,7 @@ obj-$(CONFIG_MODE_SKAS) += skas/ user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := $(user-objs-y) config.o helper.o main.o time.o tty_log.o umid.o \ - user_util.o +USER_OBJS := $(user-objs-y) config.o time.o tty_log.o umid.o user_util.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index a97a72e516aa..7713e7a6f476 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -20,7 +20,6 @@ #include "user_util.h" #include "mem_user.h" #include "os.h" -#include "helper.h" EXPORT_SYMBOL(stop); EXPORT_SYMBOL(uml_physmem); diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 462cc9d65386..fa4f915be5c5 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -234,8 +234,8 @@ void paging_init(void) empty_bad_page = (unsigned long *) alloc_bootmem_low_pages(PAGE_SIZE); for(i=0;i<sizeof(zones_size)/sizeof(zones_size[0]);i++) zones_size[i] = 0; - zones_size[0] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); - zones_size[2] = highmem >> PAGE_SHIFT; + zones_size[ZONE_DMA] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); + zones_size[ZONE_HIGHMEM] = highmem >> PAGE_SHIFT; free_area_init(zones_size); /* diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index ea670fcc8af5..f3b583a878a6 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -246,7 +246,7 @@ int is_remapped(void *virt) /* Changed during early boot */ unsigned long high_physmem; -extern unsigned long physmem_size; +extern unsigned long long physmem_size; int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) { @@ -321,7 +321,7 @@ void map_memory(unsigned long virt, unsigned long phys, unsigned long len, extern int __syscall_stub_start, __binary_start; void setup_physmem(unsigned long start, unsigned long reserve_end, - unsigned long len, unsigned long highmem) + unsigned long len, unsigned long long highmem) { unsigned long reserve = reserve_end - start; int pfn = PFN_UP(__pa(reserve_end)); diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 71af4d503899..98e09395c093 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -43,53 +43,10 @@ void ptrace_disable(struct task_struct *child) extern int peek_user(struct task_struct * child, long addr, long data); extern int poke_user(struct task_struct * child, long addr, long data); -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int i, ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - -#ifdef SUBACH_PTRACE_SPECIAL - SUBARCH_PTRACE_SPECIAL(child,request,addr,data); -#endif - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -282,10 +239,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } - out_tsk: - put_task_struct(child); - out: - unlock_kernel(); + return ret; } diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c index a52751108aa1..48b1f644b9a6 100644 --- a/arch/um/kernel/sigio_user.c +++ b/arch/um/kernel/sigio_user.c @@ -18,7 +18,6 @@ #include "kern_util.h" #include "user_util.h" #include "sigio.h" -#include "helper.h" #include "os.h" /* Changed during early boot */ @@ -225,7 +224,7 @@ static int need_poll(int n) next_poll.used = n; return(0); } - if(next_poll.poll != NULL) kfree(next_poll.poll); + kfree(next_poll.poll); next_poll.poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); if(next_poll.poll == NULL){ printk("need_poll : failed to allocate new pollfds\n"); diff --git a/arch/um/kernel/skas/include/mmu-skas.h b/arch/um/kernel/skas/include/mmu-skas.h index 09536f81ee42..44110c521e49 100644 --- a/arch/um/kernel/skas/include/mmu-skas.h +++ b/arch/um/kernel/skas/include/mmu-skas.h @@ -8,6 +8,7 @@ #include "linux/config.h" #include "mm_id.h" +#include "asm/ldt.h" struct mmu_context_skas { struct mm_id id; @@ -15,6 +16,7 @@ struct mmu_context_skas { #ifdef CONFIG_3_LEVEL_PGTABLES unsigned long last_pmd; #endif + uml_ldt_t ldt; }; extern void switch_mm_skas(struct mm_id * mm_idp); diff --git a/arch/um/kernel/skas/include/skas.h b/arch/um/kernel/skas/include/skas.h index 060934740f9f..daa2f85b684c 100644 --- a/arch/um/kernel/skas/include/skas.h +++ b/arch/um/kernel/skas/include/skas.h @@ -10,7 +10,8 @@ #include "sysdep/ptrace.h" extern int userspace_pid[]; -extern int proc_mm, ptrace_faultinfo; +extern int proc_mm, ptrace_faultinfo, ptrace_ldt; +extern int skas_needs_stub; extern void switch_threads(void *me, void *next); extern void thread_wait(void *sw, void *fb); diff --git a/arch/um/kernel/skas/include/uaccess-skas.h b/arch/um/kernel/skas/include/uaccess-skas.h index 7da0c2def0ef..f611f83ad4ff 100644 --- a/arch/um/kernel/skas/include/uaccess-skas.h +++ b/arch/um/kernel/skas/include/uaccess-skas.h @@ -9,14 +9,8 @@ #include "asm/errno.h" #include "asm/fixmap.h" -#define access_ok_skas(type, addr, size) \ - ((segment_eq(get_fs(), KERNEL_DS)) || \ - (((unsigned long) (addr) < TASK_SIZE) && \ - ((unsigned long) (addr) + (size) <= TASK_SIZE)) || \ - ((type == VERIFY_READ ) && \ - ((unsigned long) (addr) >= FIXADDR_USER_START) && \ - ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \ - ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))) +/* No SKAS-specific checking. */ +#define access_ok_skas(type, addr, size) 0 extern int copy_from_user_skas(void *to, const void __user *from, int n); extern int copy_to_user_skas(void __user *to, const void *from, int n); diff --git a/arch/um/kernel/skas/mem.c b/arch/um/kernel/skas/mem.c index 147466d7ff4f..88ab96c609ce 100644 --- a/arch/um/kernel/skas/mem.c +++ b/arch/um/kernel/skas/mem.c @@ -20,7 +20,7 @@ unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out, *task_size_out = CONFIG_HOST_TASK_SIZE; #else *host_size_out = top; - if (proc_mm && ptrace_faultinfo) + if (!skas_needs_stub) *task_size_out = top; else *task_size_out = CONFIG_STUB_START & PGDIR_MASK; #endif diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index 9e5e39cea821..677871f1b37c 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -15,6 +15,7 @@ #include "asm/mmu.h" #include "asm/pgalloc.h" #include "asm/pgtable.h" +#include "asm/ldt.h" #include "os.h" #include "skas.h" @@ -74,13 +75,12 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) { - struct mm_struct *cur_mm = current->mm; - struct mm_id *cur_mm_id = &cur_mm->context.skas.id; - struct mm_id *mm_id = &mm->context.skas.id; + struct mmu_context_skas *from_mm = NULL; + struct mmu_context_skas *to_mm = &mm->context.skas; unsigned long stack = 0; - int from, ret = -ENOMEM; + int from_fd, ret = -ENOMEM; - if(!proc_mm || !ptrace_faultinfo){ + if(skas_needs_stub){ stack = get_zeroed_page(GFP_KERNEL); if(stack == 0) goto out; @@ -102,33 +102,43 @@ int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) mm->nr_ptes--; } - mm_id->stack = stack; + + to_mm->id.stack = stack; + if(current->mm != NULL && current->mm != &init_mm) + from_mm = ¤t->mm->context.skas; if(proc_mm){ - if((cur_mm != NULL) && (cur_mm != &init_mm)) - from = cur_mm_id->u.mm_fd; - else from = -1; + if(from_mm) + from_fd = from_mm->id.u.mm_fd; + else from_fd = -1; - ret = new_mm(from, stack); + ret = new_mm(from_fd, stack); if(ret < 0){ printk("init_new_context_skas - new_mm failed, " "errno = %d\n", ret); goto out_free; } - mm_id->u.mm_fd = ret; + to_mm->id.u.mm_fd = ret; } else { - if((cur_mm != NULL) && (cur_mm != &init_mm)) - mm_id->u.pid = copy_context_skas0(stack, - cur_mm_id->u.pid); - else mm_id->u.pid = start_userspace(stack); + if(from_mm) + to_mm->id.u.pid = copy_context_skas0(stack, + from_mm->id.u.pid); + else to_mm->id.u.pid = start_userspace(stack); + } + + ret = init_new_ldt(to_mm, from_mm); + if(ret < 0){ + printk("init_new_context_skas - init_ldt" + " failed, errno = %d\n", ret); + goto out_free; } return 0; out_free: - if(mm_id->stack != 0) - free_page(mm_id->stack); + if(to_mm->id.stack != 0) + free_page(to_mm->id.stack); out: return ret; } diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c index 5cd0e9929789..599d679bd4fc 100644 --- a/arch/um/kernel/skas/process.c +++ b/arch/um/kernel/skas/process.c @@ -69,6 +69,17 @@ void wait_stub_done(int pid, int sig, char * fname) if((n < 0) || !WIFSTOPPED(status) || (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){ + unsigned long regs[FRAME_SIZE]; + if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0) + printk("Failed to get registers from stub, " + "errno = %d\n", errno); + else { + int i; + + printk("Stub registers -\n"); + for(i = 0; i < FRAME_SIZE; i++) + printk("\t%d - %lx\n", i, regs[i]); + } panic("%s : failed to wait for SIGUSR1/SIGTRAP, " "pid = %d, n = %d, errno = %d, status = 0x%x\n", fname, pid, n, errno, status); @@ -370,9 +381,9 @@ int copy_context_skas0(unsigned long new_stack, int pid) } /* - * This is used only, if proc_mm is available, while PTRACE_FAULTINFO - * isn't. Opening /proc/mm creates a new mm_context, which lacks the stub-pages - * Thus, we map them using /proc/mm-fd + * This is used only, if stub pages are needed, while proc_mm is + * availabl. Opening /proc/mm creates a new mm_context, which lacks + * the stub-pages. Thus, we map them using /proc/mm-fd */ void map_stub_pages(int fd, unsigned long code, unsigned long data, unsigned long stack) diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index efe92e8aa2a9..9c990253966c 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -145,7 +145,7 @@ int new_mm(int from, unsigned long stack) "err = %d\n", -n); } - if(!ptrace_faultinfo) + if(skas_needs_stub) map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack); return(fd); diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c index 75195281081e..a5a47528dec7 100644 --- a/arch/um/kernel/skas/uaccess.c +++ b/arch/um/kernel/skas/uaccess.c @@ -143,7 +143,7 @@ int copy_from_user_skas(void *to, const void __user *from, int n) return(0); } - return(access_ok_skas(VERIFY_READ, from, n) ? + return(access_ok(VERIFY_READ, from, n) ? buffer_op((unsigned long) from, n, 0, copy_chunk_from_user, &to): n); } @@ -164,7 +164,7 @@ int copy_to_user_skas(void __user *to, const void *from, int n) return(0); } - return(access_ok_skas(VERIFY_WRITE, to, n) ? + return(access_ok(VERIFY_WRITE, to, n) ? buffer_op((unsigned long) to, n, 1, copy_chunk_to_user, &from) : n); } @@ -193,7 +193,7 @@ int strncpy_from_user_skas(char *dst, const char __user *src, int count) return(strnlen(dst, count)); } - if(!access_ok_skas(VERIFY_READ, src, 1)) + if(!access_ok(VERIFY_READ, src, 1)) return(-EFAULT); n = buffer_op((unsigned long) src, count, 0, strncpy_chunk_from_user, @@ -221,7 +221,7 @@ int clear_user_skas(void __user *mem, int len) return(0); } - return(access_ok_skas(VERIFY_WRITE, mem, len) ? + return(access_ok(VERIFY_WRITE, mem, len) ? buffer_op((unsigned long) mem, len, 1, clear_chunk, NULL) : len); } diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c index 95c8f8733baf..0d4c10a73607 100644 --- a/arch/um/kernel/trap_kern.c +++ b/arch/um/kernel/trap_kern.c @@ -95,7 +95,16 @@ survive: pte = pte_offset_kernel(pmd, address); } while(!pte_present(*pte)); err = 0; + /* The below warning was added in place of + * pte_mkyoung(); if (is_write) pte_mkdirty(); + * If it's triggered, we'd see normally a hang here (a clean pte is + * marked read-only to emulate the dirty bit). + * However, the generic code can mark a PTE writable but clean on a + * concurrent read fault, triggering this harmlessly. So comment it out. + */ +#if 0 WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte))); +#endif flush_tlb_page(vma, address); out: up_read(&mm->mmap_sem); diff --git a/arch/um/kernel/tt/include/uaccess-tt.h b/arch/um/kernel/tt/include/uaccess-tt.h index dc2ebfa8c54f..b9bfe9c481c4 100644 --- a/arch/um/kernel/tt/include/uaccess-tt.h +++ b/arch/um/kernel/tt/include/uaccess-tt.h @@ -19,19 +19,13 @@ extern unsigned long end_vm; extern unsigned long uml_physmem; -#define under_task_size(addr, size) \ - (((unsigned long) (addr) < TASK_SIZE) && \ - (((unsigned long) (addr) + (size)) < TASK_SIZE)) - #define is_stack(addr, size) \ (((unsigned long) (addr) < STACK_TOP) && \ ((unsigned long) (addr) >= STACK_TOP - ABOVE_KMEM) && \ (((unsigned long) (addr) + (size)) <= STACK_TOP)) #define access_ok_tt(type, addr, size) \ - ((type == VERIFY_READ) || (segment_eq(get_fs(), KERNEL_DS)) || \ - (((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) && \ - (under_task_size(addr, size) || is_stack(addr, size)))) + (is_stack(addr, size)) extern unsigned long get_fault_addr(void); diff --git a/arch/um/kernel/tt/uaccess.c b/arch/um/kernel/tt/uaccess.c index a72aa632972f..1cb60726567e 100644 --- a/arch/um/kernel/tt/uaccess.c +++ b/arch/um/kernel/tt/uaccess.c @@ -8,7 +8,7 @@ int copy_from_user_tt(void *to, const void __user *from, int n) { - if(!access_ok_tt(VERIFY_READ, from, n)) + if(!access_ok(VERIFY_READ, from, n)) return(n); return(__do_copy_from_user(to, from, n, ¤t->thread.fault_addr, @@ -17,7 +17,7 @@ int copy_from_user_tt(void *to, const void __user *from, int n) int copy_to_user_tt(void __user *to, const void *from, int n) { - if(!access_ok_tt(VERIFY_WRITE, to, n)) + if(!access_ok(VERIFY_WRITE, to, n)) return(n); return(__do_copy_to_user(to, from, n, ¤t->thread.fault_addr, @@ -28,7 +28,7 @@ int strncpy_from_user_tt(char *dst, const char __user *src, int count) { int n; - if(!access_ok_tt(VERIFY_READ, src, 1)) + if(!access_ok(VERIFY_READ, src, 1)) return(-EFAULT); n = __do_strncpy_from_user(dst, src, count, @@ -47,7 +47,7 @@ int __clear_user_tt(void __user *mem, int len) int clear_user_tt(void __user *mem, int len) { - if(!access_ok_tt(VERIFY_WRITE, mem, len)) + if(!access_ok(VERIFY_WRITE, mem, len)) return(len); return(__do_clear_user(mem, len, ¤t->thread.fault_addr, diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c index 8c220f054b61..6c92bbccb49c 100644 --- a/arch/um/kernel/tt/uaccess_user.c +++ b/arch/um/kernel/tt/uaccess_user.c @@ -10,6 +10,7 @@ #include "uml_uaccess.h" #include "task.h" #include "kern_util.h" +#include "os.h" int __do_copy_from_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher) diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c new file mode 100644 index 000000000000..054e3de0784e --- /dev/null +++ b/arch/um/kernel/uaccess.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +/* These are here rather than tt/uaccess.c because skas mode needs them in + * order to do SIGBUS recovery when a tmpfs mount runs out of room. + */ + +#include <linux/string.h> +#include "os.h" + +void __do_copy(void *to, const void *from, int n) +{ + memcpy(to, from, n); +} + + +int __do_copy_to_user(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher) +{ + unsigned long fault; + int faulted; + + fault = __do_user_copy(to, from, n, fault_addr, fault_catcher, + __do_copy, &faulted); + if(!faulted) return(0); + else return(n - (fault - (unsigned long) to)); +} diff --git a/arch/um/kernel/uaccess_user.c b/arch/um/kernel/uaccess_user.c deleted file mode 100644 index d035257ed0af..000000000000 --- a/arch/um/kernel/uaccess_user.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) - * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <setjmp.h> -#include <string.h> - -/* These are here rather than tt/uaccess.c because skas mode needs them in - * order to do SIGBUS recovery when a tmpfs mount runs out of room. - */ - -unsigned long __do_user_copy(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher, - void (*op)(void *to, const void *from, - int n), int *faulted_out) -{ - unsigned long *faddrp = (unsigned long *) fault_addr, ret; - - sigjmp_buf jbuf; - *fault_catcher = &jbuf; - if(sigsetjmp(jbuf, 1) == 0){ - (*op)(to, from, n); - ret = 0; - *faulted_out = 0; - } - else { - ret = *faddrp; - *faulted_out = 1; - } - *fault_addr = NULL; - *fault_catcher = NULL; - return ret; -} - -void __do_copy(void *to, const void *from, int n) -{ - memcpy(to, from, n); -} - - -int __do_copy_to_user(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher) -{ - unsigned long fault; - int faulted; - - fault = __do_user_copy(to, from, n, fault_addr, fault_catcher, - __do_copy, &faulted); - if(!faulted) return(0); - else return(n - (fault - (unsigned long) to)); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 93dc782dc1cc..142a9493912b 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -137,7 +137,7 @@ static char *argv1_end = NULL; /* Set in early boot */ static int have_root __initdata = 0; -long physmem_size = 32 * 1024 * 1024; +long long physmem_size = 32 * 1024 * 1024; void set_cmdline(char *cmd) { @@ -402,7 +402,7 @@ int linux_main(int argc, char **argv) #ifndef CONFIG_HIGHMEM highmem = 0; printf("CONFIG_HIGHMEM not enabled - physical memory shrunk " - "to %ld bytes\n", physmem_size); + "to %lu bytes\n", physmem_size); #endif } @@ -414,8 +414,8 @@ int linux_main(int argc, char **argv) setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem); if(init_maps(physmem_size, iomem_size, highmem)){ - printf("Failed to allocate mem_map for %ld bytes of physical " - "memory and %ld bytes of highmem\n", physmem_size, + printf("Failed to allocate mem_map for %lu bytes of physical " + "memory and %lu bytes of highmem\n", physmem_size, highmem); exit(1); } @@ -426,7 +426,7 @@ int linux_main(int argc, char **argv) end_vm = start_vm + virtmem_size; if(virtmem_size < physmem_size) - printf("Kernel virtual memory size shrunk to %ld bytes\n", + printf("Kernel virtual memory size shrunk to %lu bytes\n", virtmem_size); uml_postsetup(); diff --git a/arch/um/kernel/user_util.c b/arch/um/kernel/user_util.c index 41d17c71511c..4c231161f257 100644 --- a/arch/um/kernel/user_util.c +++ b/arch/um/kernel/user_util.c @@ -27,7 +27,6 @@ #include "user.h" #include "mem_user.h" #include "init.h" -#include "helper.h" #include "ptrace_user.h" #include "uml-config.h" diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index d15ec2af6a22..b83ac8e21c35 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,11 +3,12 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o time.o \ - tt.o tty.o user_syms.o drivers/ sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ + start_up.o time.o tt.o tty.o uaccess.o user_syms.o drivers/ \ + sys-$(SUBARCH)/ -USER_OBJS := aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o \ - time.o tt.o tty.o +USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ + start_up.o time.o tt.o tty.o uaccess.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index 41cfb0944201..ffa759addd3c 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -10,7 +10,6 @@ #include <sched.h> #include <sys/syscall.h> #include "os.h" -#include "helper.h" #include "aio.h" #include "init.h" #include "user.h" diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index cd4d6544da71..901b85e8a1c6 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -19,7 +19,6 @@ #include "user_util.h" #include "net_user.h" #include "etap.h" -#include "helper.h" #include "os.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 4ba9b17adf13..52945338b64d 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -20,7 +20,6 @@ #include "kern_util.h" #include "user_util.h" #include "user.h" -#include "helper.h" #include "os.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/kernel/helper.c b/arch/um/os-Linux/helper.c index 33fb0bd3b11a..36cc8475bcda 100644 --- a/arch/um/kernel/helper.c +++ b/arch/um/os-Linux/helper.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -13,7 +13,6 @@ #include "user.h" #include "kern_util.h" #include "user_util.h" -#include "helper.h" #include "os.h" struct helper_data { @@ -46,7 +45,7 @@ static int helper_child(void *arg) errval = errno; printk("execvp of '%s' failed - errno = %d\n", argv[0], errno); os_write_file(data->fd, &errval, sizeof(errval)); - os_kill_process(os_getpid(), 0); + kill(os_getpid(), SIGKILL); return(0); } @@ -90,7 +89,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, goto out_close; } - os_close_file(fds[1]); + close(fds[1]); fds[1] = -1; /*Read the errno value from the child.*/ @@ -98,7 +97,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, if(n < 0){ printk("run_helper : read on pipe failed, ret = %d\n", -n); ret = n; - os_kill_process(pid, 1); + kill(pid, SIGKILL); + CATCH_EINTR(waitpid(pid, NULL, 0)); } else if(n != 0){ CATCH_EINTR(n = waitpid(pid, NULL, 0)); @@ -109,8 +109,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, out_close: if (fds[1] != -1) - os_close_file(fds[1]); - os_close_file(fds[0]); + close(fds[1]); + close(fds[0]); out_free: if(stack_out == NULL) free_stack(stack, 0); @@ -118,7 +118,7 @@ out_free: return(ret); } -int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, +int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, unsigned long *stack_out, int stack_order) { unsigned long stack, sp; @@ -131,7 +131,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); if(pid < 0){ err = -errno; - printk("run_helper_thread : clone failed, errno = %d\n", + printk("run_helper_thread : clone failed, errno = %d\n", errno); return err; } diff --git a/arch/um/kernel/main.c b/arch/um/os-Linux/main.c index d31027f0fe39..23da27d22569 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/os-Linux/main.c @@ -157,25 +157,25 @@ int main(int argc, char **argv, char **envp) */ change_sig(SIGPROF, 0); - /* This signal stuff used to be in the reboot case. However, - * sometimes a SIGVTALRM can come in when we're halting (reproducably - * when writing out gcov information, presumably because that takes - * some time) and cause a segfault. - */ - - /* stop timers and set SIG*ALRM to be ignored */ - disable_timer(); - - /* disable SIGIO for the fds and set SIGIO to be ignored */ - err = deactivate_all_fds(); - if(err) - printf("deactivate_all_fds failed, errno = %d\n", -err); - - /* Let any pending signals fire now. This ensures - * that they won't be delivered after the exec, when - * they are definitely not expected. - */ - unblock_signals(); + /* This signal stuff used to be in the reboot case. However, + * sometimes a SIGVTALRM can come in when we're halting (reproducably + * when writing out gcov information, presumably because that takes + * some time) and cause a segfault. + */ + + /* stop timers and set SIG*ALRM to be ignored */ + disable_timer(); + + /* disable SIGIO for the fds and set SIGIO to be ignored */ + err = deactivate_all_fds(); + if(err) + printf("deactivate_all_fds failed, errno = %d\n", -err); + + /* Let any pending signals fire now. This ensures + * that they won't be delivered after the exec, when + * they are definitely not expected. + */ + unblock_signals(); /* Reboot */ if(ret){ @@ -257,14 +257,3 @@ void __wrap_free(void *ptr) } else __real_free(ptr); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 8e71edaaf80b..9d7d69a523bb 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -88,7 +88,7 @@ int make_tempfile(const char *template, char **out_tempname, int do_unlink) * This proc is used in start_up.c * So it isn't 'static'. */ -int create_tmp_file(unsigned long len) +int create_tmp_file(unsigned long long len) { int fd, err; char zero; @@ -121,7 +121,7 @@ int create_tmp_file(unsigned long len) return(fd); } -static int create_anon_file(unsigned long len) +static int create_anon_file(unsigned long long len) { void *addr; int fd; @@ -144,7 +144,7 @@ static int create_anon_file(unsigned long len) extern int have_devanon; -int create_mem_file(unsigned long len) +int create_mem_file(unsigned long long len) { int err, fd; diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index b99ab414542f..37517d49c4ae 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -135,7 +135,9 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, } int ptrace_faultinfo = 1; +int ptrace_ldt = 1; int proc_mm = 1; +int skas_needs_stub = 0; static int __init skas0_cmd_param(char *str, int* add) { @@ -294,7 +296,7 @@ static void __init check_ptrace(void) check_sysemu(); } -extern int create_tmp_file(unsigned long len); +extern int create_tmp_file(unsigned long long len); static void check_tmpexec(void) { @@ -352,14 +354,26 @@ __uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param, " it. To support PTRACE_FAULTINFO, the host needs to be patched\n" " using the current skas3 patch.\n\n"); +static int __init noptraceldt_cmd_param(char *str, int* add) +{ + ptrace_ldt = 0; + return 0; +} + +__uml_setup("noptraceldt", noptraceldt_cmd_param, +"noptraceldt\n" +" Turns off usage of PTRACE_LDT, even if host supports it.\n" +" To support PTRACE_LDT, the host needs to be patched using\n" +" the current skas3 patch.\n\n"); + #ifdef UML_CONFIG_MODE_SKAS -static inline void check_skas3_ptrace_support(void) +static inline void check_skas3_ptrace_faultinfo(void) { struct ptrace_faultinfo fi; void *stack; int pid, n; - printf("Checking for the skas3 patch in the host..."); + printf(" - PTRACE_FAULTINFO..."); pid = start_ptraced_child(&stack); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); @@ -381,9 +395,49 @@ static inline void check_skas3_ptrace_support(void) stop_ptraced_child(pid, stack, 1, 1); } -int can_do_skas(void) +static inline void check_skas3_ptrace_ldt(void) +{ +#ifdef PTRACE_LDT + void *stack; + int pid, n; + unsigned char ldtbuf[40]; + struct ptrace_ldt ldt_op = (struct ptrace_ldt) { + .func = 2, /* read default ldt */ + .ptr = ldtbuf, + .bytecount = sizeof(ldtbuf)}; + + printf(" - PTRACE_LDT..."); + pid = start_ptraced_child(&stack); + + n = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); + if (n < 0) { + if(errno == EIO) + printf("not found\n"); + else { + perror("not found"); + } + ptrace_ldt = 0; + } + else { + if(ptrace_ldt) + printf("found\n"); + else + printf("found, but use is disabled\n"); + } + + stop_ptraced_child(pid, stack, 1, 1); +#else + /* PTRACE_LDT might be disabled via cmdline option. + * We want to override this, else we might use the stub + * without real need + */ + ptrace_ldt = 1; +#endif +} + +static inline void check_skas3_proc_mm(void) { - printf("Checking for /proc/mm..."); + printf(" - /proc/mm..."); if (os_access("/proc/mm", OS_ACC_W_OK) < 0) { proc_mm = 0; printf("not found\n"); @@ -394,8 +448,19 @@ int can_do_skas(void) else printf("found\n"); } +} + +int can_do_skas(void) +{ + printf("Checking for the skas3 patch in the host:\n"); + + check_skas3_proc_mm(); + check_skas3_ptrace_faultinfo(); + check_skas3_ptrace_ldt(); + + if(!proc_mm || !ptrace_faultinfo || !ptrace_ldt) + skas_needs_stub = 1; - check_skas3_ptrace_support(); return 1; } #else diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c new file mode 100644 index 000000000000..38d710158c3d --- /dev/null +++ b/arch/um/os-Linux/uaccess.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include <setjmp.h> +#include <string.h> + +unsigned long __do_user_copy(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher, + void (*op)(void *to, const void *from, + int n), int *faulted_out) +{ + unsigned long *faddrp = (unsigned long *) fault_addr, ret; + + sigjmp_buf jbuf; + *fault_catcher = &jbuf; + if(sigsetjmp(jbuf, 1) == 0){ + (*op)(to, from, n); + ret = 0; + *faulted_out = 0; + } + else { + ret = *faddrp; + *faulted_out = 1; + } + *fault_addr = NULL; + *fault_catcher = NULL; + return ret; +} + diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 651d9d88b656..b3fbf125709b 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -26,8 +26,13 @@ define unprofile $(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1))) endef +# cmd_make_link checks to see if the $(foo-dir) variable starts with a /. If +# so, it's considered to be a path relative to $(srcdir) rather than +# $(srcdir)/arch/$(SUBARCH). This is because x86_64 wants to get ldt.c from +# arch/um/sys-i386 rather than arch/i386 like the other borrowed files. So, +# it sets $(ldt.c-dir) to /arch/um/sys-i386. quiet_cmd_make_link = SYMLINK $@ -cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@ +cmd_make_link = rm -f $@; ln -sf $(srctree)$(if $(filter-out /%,$($(notdir $@)-dir)),/arch/$(SUBARCH))/$($(notdir $@)-dir)/$(notdir $@) $@ # this needs to be before the foreach, because targets does not accept # complete paths like $(obj)/$(f). To make sure this works, use a := assignment diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index 36b5c2c13289..6360f1c958d0 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -3,53 +3,26 @@ * Licensed under the GPL */ +#include "linux/stddef.h" #include "linux/config.h" #include "linux/sched.h" #include "linux/slab.h" #include "linux/types.h" +#include "linux/errno.h" #include "asm/uaccess.h" -#include "asm/ptrace.h" #include "asm/smp.h" #include "asm/ldt.h" +#include "asm/unistd.h" #include "choose-mode.h" #include "kern.h" #include "mode_kern.h" -#ifdef CONFIG_MODE_TT - extern int modify_ldt(int func, void *ptr, unsigned long bytecount); -static int do_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) -{ - return modify_ldt(func, ptr, bytecount); -} - -#endif - -#ifdef CONFIG_MODE_SKAS - -#include "skas.h" -#include "skas_ptrace.h" - -static int do_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) -{ - struct ptrace_ldt ldt; - u32 cpu; - int res; - - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = ptr, - .bytecount = bytecount }); - - cpu = get_cpu(); - res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, (unsigned long) &ldt); - put_cpu(); - - return res; -} -#endif +#ifdef CONFIG_MODE_TT -int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +static long do_modify_ldt_tt(int func, void __user *ptr, + unsigned long bytecount) { struct user_desc info; int res = 0; @@ -89,8 +62,7 @@ int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) goto out; } - res = CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, - p, bytecount); + res = modify_ldt(func, p, bytecount); if(res < 0) goto out; @@ -108,3 +80,467 @@ out: kfree(buf); return res; } + +#endif + +#ifdef CONFIG_MODE_SKAS + +#include "skas.h" +#include "skas_ptrace.h" +#include "asm/mmu_context.h" + +long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, + void **addr, int done) +{ + long res; + + if(proc_mm){ + /* This is a special handling for the case, that the mm to + * modify isn't current->active_mm. + * If this is called directly by modify_ldt, + * (current->active_mm->context.skas.u == mm_idp) + * will be true. So no call to switch_mm_skas(mm_idp) is done. + * If this is called in case of init_new_ldt or PTRACE_LDT, + * mm_idp won't belong to current->active_mm, but child->mm. + * So we need to switch child's mm into our userspace, then + * later switch back. + * + * Note: I'm unshure: should interrupts be disabled here? + */ + if(!current->active_mm || current->active_mm == &init_mm || + mm_idp != ¤t->active_mm->context.skas.id) + switch_mm_skas(mm_idp); + } + + if(ptrace_ldt) { + struct ptrace_ldt ldt_op = (struct ptrace_ldt) { + .func = func, + .ptr = desc, + .bytecount = sizeof(*desc)}; + u32 cpu; + int pid; + + if(!proc_mm) + pid = mm_idp->u.pid; + else { + cpu = get_cpu(); + pid = userspace_pid[cpu]; + } + + res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); + if(res) + res = errno; + + if(proc_mm) + put_cpu(); + } + else { + void *stub_addr; + res = syscall_stub_data(mm_idp, (unsigned long *)desc, + (sizeof(*desc) + sizeof(long) - 1) & + ~(sizeof(long) - 1), + addr, &stub_addr); + if(!res){ + unsigned long args[] = { func, + (unsigned long)stub_addr, + sizeof(*desc), + 0, 0, 0 }; + res = run_syscall_stub(mm_idp, __NR_modify_ldt, args, + 0, addr, done); + } + } + + if(proc_mm){ + /* This is the second part of special handling, that makes + * PTRACE_LDT possible to implement. + */ + if(current->active_mm && current->active_mm != &init_mm && + mm_idp != ¤t->active_mm->context.skas.id) + switch_mm_skas(¤t->active_mm->context.skas.id); + } + + return res; +} + +static long read_ldt_from_host(void __user * ptr, unsigned long bytecount) +{ + int res, n; + struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) { + .func = 0, + .bytecount = bytecount, + .ptr = (void *)kmalloc(bytecount, GFP_KERNEL)}; + u32 cpu; + + if(ptrace_ldt.ptr == NULL) + return -ENOMEM; + + /* This is called from sys_modify_ldt only, so userspace_pid gives + * us the right number + */ + + cpu = get_cpu(); + res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, + (unsigned long) &ptrace_ldt); + put_cpu(); + if(res < 0) + goto out; + + n = copy_to_user(ptr, ptrace_ldt.ptr, res); + if(n != 0) + res = -EFAULT; + + out: + kfree(ptrace_ldt.ptr); + + return res; +} + +/* + * In skas mode, we hold our own ldt data in UML. + * Thus, the code implementing sys_modify_ldt_skas + * is very similar to (and mostly stolen from) sys_modify_ldt + * for arch/i386/kernel/ldt.c + * The routines copied and modified in part are: + * - read_ldt + * - read_default_ldt + * - write_ldt + * - sys_modify_ldt_skas + */ + +static int read_ldt(void __user * ptr, unsigned long bytecount) +{ + int i, err = 0; + unsigned long size; + uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; + + if(!ldt->entry_count) + goto out; + if(bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) + bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; + err = bytecount; + + if(ptrace_ldt){ + return read_ldt_from_host(ptr, bytecount); + } + + down(&ldt->semaphore); + if(ldt->entry_count <= LDT_DIRECT_ENTRIES){ + size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES; + if(size > bytecount) + size = bytecount; + if(copy_to_user(ptr, ldt->entries, size)) + err = -EFAULT; + bytecount -= size; + ptr += size; + } + else { + for(i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount; + i++){ + size = PAGE_SIZE; + if(size > bytecount) + size = bytecount; + if(copy_to_user(ptr, ldt->pages[i], size)){ + err = -EFAULT; + break; + } + bytecount -= size; + ptr += size; + } + } + up(&ldt->semaphore); + + if(bytecount == 0 || err == -EFAULT) + goto out; + + if(clear_user(ptr, bytecount)) + err = -EFAULT; + +out: + return err; +} + +static int read_default_ldt(void __user * ptr, unsigned long bytecount) +{ + int err; + + if(bytecount > 5*LDT_ENTRY_SIZE) + bytecount = 5*LDT_ENTRY_SIZE; + + err = bytecount; + /* UML doesn't support lcall7 and lcall27. + * So, we don't really have a default ldt, but emulate + * an empty ldt of common host default ldt size. + */ + if(clear_user(ptr, bytecount)) + err = -EFAULT; + + return err; +} + +static int write_ldt(void __user * ptr, unsigned long bytecount, int func) +{ + uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; + struct mm_id * mm_idp = ¤t->mm->context.skas.id; + int i, err; + struct user_desc ldt_info; + struct ldt_entry entry0, *ldt_p; + void *addr = NULL; + + err = -EINVAL; + if(bytecount != sizeof(ldt_info)) + goto out; + err = -EFAULT; + if(copy_from_user(&ldt_info, ptr, sizeof(ldt_info))) + goto out; + + err = -EINVAL; + if(ldt_info.entry_number >= LDT_ENTRIES) + goto out; + if(ldt_info.contents == 3){ + if (func == 1) + goto out; + if (ldt_info.seg_not_present == 0) + goto out; + } + + if(!ptrace_ldt) + down(&ldt->semaphore); + + err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1); + if(err) + goto out_unlock; + else if(ptrace_ldt) { + /* With PTRACE_LDT available, this is used as a flag only */ + ldt->entry_count = 1; + goto out; + } + + if(ldt_info.entry_number >= ldt->entry_count && + ldt_info.entry_number >= LDT_DIRECT_ENTRIES){ + for(i=ldt->entry_count/LDT_ENTRIES_PER_PAGE; + i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number; + i++){ + if(i == 0) + memcpy(&entry0, ldt->entries, sizeof(entry0)); + ldt->pages[i] = (struct ldt_entry *) + __get_free_page(GFP_KERNEL|__GFP_ZERO); + if(!ldt->pages[i]){ + err = -ENOMEM; + /* Undo the change in host */ + memset(&ldt_info, 0, sizeof(ldt_info)); + write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1); + goto out_unlock; + } + if(i == 0) { + memcpy(ldt->pages[0], &entry0, sizeof(entry0)); + memcpy(ldt->pages[0]+1, ldt->entries+1, + sizeof(entry0)*(LDT_DIRECT_ENTRIES-1)); + } + ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE; + } + } + if(ldt->entry_count <= ldt_info.entry_number) + ldt->entry_count = ldt_info.entry_number + 1; + + if(ldt->entry_count <= LDT_DIRECT_ENTRIES) + ldt_p = ldt->entries + ldt_info.entry_number; + else + ldt_p = ldt->pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] + + ldt_info.entry_number%LDT_ENTRIES_PER_PAGE; + + if(ldt_info.base_addr == 0 && ldt_info.limit == 0 && + (func == 1 || LDT_empty(&ldt_info))){ + ldt_p->a = 0; + ldt_p->b = 0; + } + else{ + if (func == 1) + ldt_info.useable = 0; + ldt_p->a = LDT_entry_a(&ldt_info); + ldt_p->b = LDT_entry_b(&ldt_info); + } + err = 0; + +out_unlock: + up(&ldt->semaphore); +out: + return err; +} + +static long do_modify_ldt_skas(int func, void __user *ptr, + unsigned long bytecount) +{ + int ret = -ENOSYS; + + switch (func) { + case 0: + ret = read_ldt(ptr, bytecount); + break; + case 1: + case 0x11: + ret = write_ldt(ptr, bytecount, func); + break; + case 2: + ret = read_default_ldt(ptr, bytecount); + break; + } + return ret; +} + +short dummy_list[9] = {0, -1}; +short * host_ldt_entries = NULL; + +void ldt_get_host_info(void) +{ + long ret; + struct ldt_entry * ldt; + int i, size, k, order; + + host_ldt_entries = dummy_list+1; + + for(i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++); + + ldt = (struct ldt_entry *) + __get_free_pages(GFP_KERNEL|__GFP_ZERO, order); + if(ldt == NULL) { + printk("ldt_get_host_info: couldn't allocate buffer for host ldt\n"); + return; + } + + ret = modify_ldt(0, ldt, (1<<order)*PAGE_SIZE); + if(ret < 0) { + printk("ldt_get_host_info: couldn't read host ldt\n"); + goto out_free; + } + if(ret == 0) { + /* default_ldt is active, simply write an empty entry 0 */ + host_ldt_entries = dummy_list; + goto out_free; + } + + for(i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++){ + if(ldt[i].a != 0 || ldt[i].b != 0) + size++; + } + + if(size < sizeof(dummy_list)/sizeof(dummy_list[0])) { + host_ldt_entries = dummy_list; + } + else { + size = (size + 1) * sizeof(dummy_list[0]); + host_ldt_entries = (short *)kmalloc(size, GFP_KERNEL); + if(host_ldt_entries == NULL) { + printk("ldt_get_host_info: couldn't allocate host ldt list\n"); + goto out_free; + } + } + + for(i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++){ + if(ldt[i].a != 0 || ldt[i].b != 0) { + host_ldt_entries[k++] = i; + } + } + host_ldt_entries[k] = -1; + +out_free: + free_pages((unsigned long)ldt, order); +} + +long init_new_ldt(struct mmu_context_skas * new_mm, + struct mmu_context_skas * from_mm) +{ + struct user_desc desc; + short * num_p; + int i; + long page, err=0; + void *addr = NULL; + + memset(&desc, 0, sizeof(desc)); + + if(!ptrace_ldt) + init_MUTEX(&new_mm->ldt.semaphore); + + if(!from_mm){ + /* + * We have to initialize a clean ldt. + */ + if(proc_mm) { + /* + * If the new mm was created using proc_mm, host's + * default-ldt currently is assigned, which normally + * contains the call-gates for lcall7 and lcall27. + * To remove these gates, we simply write an empty + * entry as number 0 to the host. + */ + err = write_ldt_entry(&new_mm->id, 1, &desc, + &addr, 1); + } + else{ + /* + * Now we try to retrieve info about the ldt, we + * inherited from the host. All ldt-entries found + * will be reset in the following loop + */ + if(host_ldt_entries == NULL) + ldt_get_host_info(); + for(num_p=host_ldt_entries; *num_p != -1; num_p++){ + desc.entry_number = *num_p; + err = write_ldt_entry(&new_mm->id, 1, &desc, + &addr, *(num_p + 1) == -1); + if(err) + break; + } + } + new_mm->ldt.entry_count = 0; + } + else if (!ptrace_ldt) { + /* Our local LDT is used to supply the data for + * modify_ldt(READLDT), if PTRACE_LDT isn't available, + * i.e., we have to use the stub for modify_ldt, which + * can't handle the big read buffer of up to 64kB. + */ + down(&from_mm->ldt.semaphore); + if(from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES){ + memcpy(new_mm->ldt.entries, from_mm->ldt.entries, + sizeof(new_mm->ldt.entries)); + } + else{ + i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; + while(i-->0){ + page = __get_free_page(GFP_KERNEL|__GFP_ZERO); + if (!page){ + err = -ENOMEM; + break; + } + new_mm->ldt.pages[i] = (struct ldt_entry*)page; + memcpy(new_mm->ldt.pages[i], + from_mm->ldt.pages[i], PAGE_SIZE); + } + } + new_mm->ldt.entry_count = from_mm->ldt.entry_count; + up(&from_mm->ldt.semaphore); + } + + return err; +} + + +void free_ldt(struct mmu_context_skas * mm) +{ + int i; + + if(!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES){ + i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; + while(i-- > 0){ + free_page((long )mm->ldt.pages[i]); + } + } + mm->ldt.entry_count = 0; +} +#endif + +int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +{ + return(CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, + ptr, bytecount)); +} diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 06c3633457a2..ea977df395a1 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -5,7 +5,7 @@ # #XXX: why into lib-y? -lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o mem.o memcpy.o \ +lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o ldt.o mem.o memcpy.o \ ptrace.o ptrace_user.o sigcontext.o signal.o stub.o \ stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o @@ -14,7 +14,7 @@ obj-$(CONFIG_MODULES) += module.o um_module.o USER_OBJS := ptrace_user.o sigcontext.o -SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \ +SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c ldt.c memcpy.S \ thunk.S module.c include arch/um/scripts/Makefile.rules @@ -23,6 +23,7 @@ bitops.c-dir = lib csum-copy.S-dir = lib csum-partial.c-dir = lib csum-wrappers.c-dir = lib +ldt.c-dir = /arch/um/sys-i386 memcpy.S-dir = lib thunk.S-dir = lib module.c-dir = kernel diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index 3259a4db4534..6acee5c4ada6 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -29,81 +29,6 @@ asmlinkage long sys_uname64(struct new_utsname __user * name) } #ifdef CONFIG_MODE_TT -extern int modify_ldt(int func, void *ptr, unsigned long bytecount); - -long sys_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) -{ - /* XXX This should check VERIFY_WRITE depending on func, check this - * in i386 as well. - */ - if (!access_ok(VERIFY_READ, ptr, bytecount)) - return -EFAULT; - return(modify_ldt(func, ptr, bytecount)); -} -#endif - -#ifdef CONFIG_MODE_SKAS -extern int userspace_pid[]; - -#include "skas_ptrace.h" - -long sys_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) -{ - struct ptrace_ldt ldt; - void *buf; - int res, n; - - buf = kmalloc(bytecount, GFP_KERNEL); - if(buf == NULL) - return(-ENOMEM); - - res = 0; - - switch(func){ - case 1: - case 0x11: - res = copy_from_user(buf, ptr, bytecount); - break; - } - - if(res != 0){ - res = -EFAULT; - goto out; - } - - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = buf, - .bytecount = bytecount }); -#warning Need to look up userspace_pid by cpu - res = ptrace(PTRACE_LDT, userspace_pid[0], 0, (unsigned long) &ldt); - if(res < 0) - goto out; - - switch(func){ - case 0: - case 2: - n = res; - res = copy_to_user(ptr, buf, n); - if(res != 0) - res = -EFAULT; - else - res = n; - break; - } - - out: - kfree(buf); - return(res); -} -#endif - -long sys_modify_ldt(int func, void *ptr, unsigned long bytecount) -{ - return(CHOOSE_MODE_PROC(sys_modify_ldt_tt, sys_modify_ldt_skas, func, - ptr, bytecount)); -} - -#ifdef CONFIG_MODE_TT extern long arch_prctl(int code, unsigned long addr); static long arch_prctl_tt(int code, unsigned long addr) diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index 89c053b6c2c4..310865903234 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -23,6 +23,14 @@ config GENERIC_CALIBRATE_DELAY bool default y +config GENERIC_HARDIRQS + bool + default y + +config GENERIC_IRQ_PROBE + bool + default y + # Turn off some random 386 crap that can affect device config config ISA bool diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c index 9e85969ba976..7a151c26f82e 100644 --- a/arch/v850/kernel/irq.c +++ b/arch/v850/kernel/irq.c @@ -1,8 +1,8 @@ /* * arch/v850/kernel/irq.c -- High-level interrupt handling * - * Copyright (C) 2001,02,03,04 NEC Electronics Corporation - * Copyright (C) 2001,02,03,04 Miles Bader <miles@gnu.org> + * Copyright (C) 2001,02,03,04,05 NEC Electronics Corporation + * Copyright (C) 2001,02,03,04,05 Miles Bader <miles@gnu.org> * Copyright (C) 1994-2000 Ralf Baechle * Copyright (C) 1992 Linus Torvalds * @@ -27,55 +27,15 @@ #include <asm/system.h> /* - * Controller mappings for all interrupt sources: + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves, it doesn't deserve + * a generic callback i think. */ -irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = { - [0 ... NR_IRQS-1] = { - .handler = &no_irq_type, - .lock = SPIN_LOCK_UNLOCKED - } -}; - -/* - * Special irq handlers. - */ - -irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs) -{ - return IRQ_NONE; -} - -/* - * Generic no controller code - */ - -static void enable_none(unsigned int irq) { } -static unsigned int startup_none(unsigned int irq) { return 0; } -static void disable_none(unsigned int irq) { } -static void ack_none(unsigned int irq) +void ack_bad_irq(unsigned int irq) { - /* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves, it doesn't deserve - * a generic callback i think. - */ printk("received IRQ %d with unknown interrupt type\n", irq); } -/* startup is the same as "enable", shutdown is same as "disable" */ -#define shutdown_none disable_none -#define end_none enable_none - -struct hw_interrupt_type no_irq_type = { - .typename = "none", - .startup = startup_none, - .shutdown = shutdown_none, - .enable = enable_none, - .disable = disable_none, - .ack = ack_none, - .end = end_none -}; - volatile unsigned long irq_err_count, spurious_count; /* @@ -84,643 +44,68 @@ volatile unsigned long irq_err_count, spurious_count; int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v; - struct irqaction * action; - unsigned long flags; + int irq = *(loff_t *) v; - if (i == 0) { + if (irq == 0) { + int cpu; seq_puts(p, " "); - for (i=0; i < 1 /*smp_num_cpus*/; i++) - seq_printf(p, "CPU%d ", i); + for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++) + seq_printf(p, "CPU%d ", cpu); seq_putc(p, '\n'); } - if (i < NR_IRQS) { - int j, count, num; - const char *type_name = irq_desc[i].handler->typename; - spin_lock_irqsave(&irq_desc[j].lock, flags); - action = irq_desc[i].action; - if (!action) - goto skip; + if (irq < NR_IRQS) { + unsigned long flags; + struct irqaction *action; - count = 0; - num = -1; - for (j = 0; j < NR_IRQS; j++) - if (irq_desc[j].handler->typename == type_name) { - if (i == j) - num = count; - count++; - } + spin_lock_irqsave(&irq_desc[irq].lock, flags); - seq_printf(p, "%3d: ",i); - seq_printf(p, "%10u ", kstat_irqs(i)); - if (count > 1) { - int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1); - seq_printf(p, " %*s%d", 14 - prec, type_name, num); - } else - seq_printf(p, " %14s", type_name); + action = irq_desc[irq].action; + if (action) { + int j; + int count = 0; + int num = -1; + const char *type_name = irq_desc[irq].handler->typename; + + for (j = 0; j < NR_IRQS; j++) + if (irq_desc[j].handler->typename == type_name){ + if (irq == j) + num = count; + count++; + } + + seq_printf(p, "%3d: ",irq); + seq_printf(p, "%10u ", kstat_irqs(irq)); + if (count > 1) { + int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1); + seq_printf(p, " %*s%d", 14 - prec, + type_name, num); + } else + seq_printf(p, " %14s", type_name); - seq_printf(p, " %s", action->name); - for (action=action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&irq_desc[j].lock, flags); - } else if (i == NR_IRQS) - seq_printf(p, "ERR: %10lu\n", irq_err_count); - return 0; -} - -/* - * This should really return information about whether - * we should do bottom half handling etc. Right now we - * end up _always_ checking the bottom half, which is a - * waste of time and is not what some drivers would - * prefer. - */ -int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action) -{ - int status = 1; /* Force the "do bottom halves" bit */ - int ret; - - if (!(action->flags & SA_INTERRUPT)) - local_irq_enable(); - - do { - ret = action->handler(irq, action->dev_id, regs); - if (ret == IRQ_HANDLED) - status |= action->flags; - action = action->next; - } while (action); - if (status & SA_SAMPLE_RANDOM) - add_interrupt_randomness(irq); - local_irq_disable(); - - return status; -} - -/* - * Generic enable/disable code: this just calls - * down into the PIC-specific version for the actual - * hardware disable after having gotten the irq - * controller lock. - */ - -/** - * disable_irq_nosync - disable an irq without waiting - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Disables of an interrupt - * stack. Unlike disable_irq(), this function does not ensure existing - * instances of the IRQ handler have completed before returning. - * - * This function may be called from IRQ context. - */ - -void inline disable_irq_nosync(unsigned int irq) -{ - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - if (!desc->depth++) { - desc->status |= IRQ_DISABLED; - desc->handler->disable(irq); - } - spin_unlock_irqrestore(&desc->lock, flags); -} - -/** - * disable_irq - disable an irq and wait for completion - * @irq: Interrupt to disable - * - * Disable the selected interrupt line. Disables of an interrupt - * stack. That is for two disables you need two enables. This - * function waits for any pending IRQ handlers for this interrupt - * to complete before returning. If you use this function while - * holding a resource the IRQ handler may need you will deadlock. - * - * This function may be called - with care - from IRQ context. - */ - -void disable_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - synchronize_irq(irq); -} + seq_printf(p, " %s", action->name); + for (action=action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + seq_putc(p, '\n'); + } -/** - * enable_irq - enable interrupt handling on an irq - * @irq: Interrupt to enable - * - * Re-enables the processing of interrupts on this IRQ line - * providing no disable_irq calls are now in effect. - * - * This function may be called from IRQ context. - */ - -void enable_irq(unsigned int irq) -{ - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; + spin_unlock_irqrestore(&irq_desc[irq].lock, flags); + } else if (irq == NR_IRQS) + seq_printf(p, "ERR: %10lu\n", irq_err_count); - spin_lock_irqsave(&desc->lock, flags); - switch (desc->depth) { - case 1: { - unsigned int status = desc->status & ~IRQ_DISABLED; - desc->status = status; - if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) { - desc->status = status | IRQ_REPLAY; - hw_resend_irq(desc->handler,irq); - } - desc->handler->enable(irq); - /* fall-through */ - } - default: - desc->depth--; - break; - case 0: - printk("enable_irq(%u) unbalanced from %p\n", irq, - __builtin_return_address(0)); - } - spin_unlock_irqrestore(&desc->lock, flags); + return 0; } /* Handle interrupt IRQ. REGS are the registers at the time of ther interrupt. */ unsigned int handle_irq (int irq, struct pt_regs *regs) { - /* - * We ack quickly, we don't want the irq controller - * thinking we're snobs just because some other CPU has - * disabled global interrupts (we have already done the - * INT_ACK cycles, it's too late to try to pretend to the - * controller that we aren't taking the interrupt). - * - * 0 return value means that this irq is already being - * handled by some other CPU. (or is disabled) - */ - int cpu = smp_processor_id(); - irq_desc_t *desc = irq_desc + irq; - struct irqaction * action; - unsigned int status; - irq_enter(); - kstat_cpu(cpu).irqs[irq]++; - spin_lock(&desc->lock); - desc->handler->ack(irq); - /* - REPLAY is when Linux resends an IRQ that was dropped earlier - WAITING is used by probe to mark irqs that are being tested - */ - status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); - status |= IRQ_PENDING; /* we _want_ to handle it */ - - /* - * If the IRQ is disabled for whatever reason, we cannot - * use the action we have. - */ - action = NULL; - if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) { - action = desc->action; - status &= ~IRQ_PENDING; /* we commit to handling */ - status |= IRQ_INPROGRESS; /* we are handling it */ - } - desc->status = status; - - /* - * If there is no IRQ handler or it was disabled, exit early. - Since we set PENDING, if another processor is handling - a different instance of this same irq, the other processor - will take care of it. - */ - if (unlikely(!action)) - goto out; - - /* - * Edge triggered interrupts need to remember - * pending events. - * This applies to any hw interrupts that allow a second - * instance of the same irq to arrive while we are in handle_irq - * or in the handler. But the code here only handles the _second_ - * instance of the irq, not the third or fourth. So it is mostly - * useful for irq hardware that does not mask cleanly in an - * SMP environment. - */ - for (;;) { - spin_unlock(&desc->lock); - handle_IRQ_event(irq, regs, action); - spin_lock(&desc->lock); - - if (likely(!(desc->status & IRQ_PENDING))) - break; - desc->status &= ~IRQ_PENDING; - } - desc->status &= ~IRQ_INPROGRESS; - -out: - /* - * The ->end() handler has to deal with interrupts which got - * disabled while the handler was running. - */ - desc->handler->end(irq); - spin_unlock(&desc->lock); - + __do_IRQ(irq, regs); irq_exit(); - return 1; } -/** - * request_irq - allocate an interrupt line - * @irq: Interrupt line to allocate - * @handler: Function to be called when the IRQ occurs - * @irqflags: Interrupt type flags - * @devname: An ascii name for the claiming device - * @dev_id: A cookie passed back to the handler function - * - * This call allocates interrupt resources and enables the - * interrupt line and IRQ handling. From the point this - * call is made your handler function may be invoked. Since - * your handler function must clear any interrupt the board - * raises, you must take care both to initialise your hardware - * and to set up the interrupt handler in the right order. - * - * Dev_id must be globally unique. Normally the address of the - * device data structure is used as the cookie. Since the handler - * receives this value it makes sense to use it. - * - * If your interrupt is shared you must pass a non NULL dev_id - * as this is required when freeing the interrupt. - * - * Flags: - * - * SA_SHIRQ Interrupt is shared - * - * SA_INTERRUPT Disable local interrupts while processing - * - * SA_SAMPLE_RANDOM The interrupt can be used for entropy - * - */ - -int request_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, - const char * devname, - void *dev_id) -{ - int retval; - struct irqaction * action; - -#if 1 - /* - * Sanity-check: shared interrupts should REALLY pass in - * a real dev-ID, otherwise we'll have trouble later trying - * to figure out which interrupt is which (messes up the - * interrupt freeing logic etc). - */ - if (irqflags & SA_SHIRQ) { - if (!dev_id) - printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]); - } -#endif - - if (irq >= NR_IRQS) - return -EINVAL; - if (!handler) - return -EINVAL; - - action = (struct irqaction *) - kmalloc(sizeof(struct irqaction), GFP_KERNEL); - if (!action) - return -ENOMEM; - - action->handler = handler; - action->flags = irqflags; - cpus_clear(action->mask); - action->name = devname; - action->next = NULL; - action->dev_id = dev_id; - - retval = setup_irq(irq, action); - if (retval) - kfree(action); - return retval; -} - -EXPORT_SYMBOL(request_irq); - -/** - * free_irq - free an interrupt - * @irq: Interrupt line to free - * @dev_id: Device identity to free - * - * Remove an interrupt handler. The handler is removed and if the - * interrupt line is no longer in use by any driver it is disabled. - * On a shared IRQ the caller must ensure the interrupt is disabled - * on the card it drives before calling this function. The function - * does not return until any executing interrupts for this IRQ - * have completed. - * - * This function may be called from interrupt context. - * - * Bugs: Attempting to free an irq in a handler for the same irq hangs - * the machine. - */ - -void free_irq(unsigned int irq, void *dev_id) -{ - irq_desc_t *desc; - struct irqaction **p; - unsigned long flags; - - if (irq >= NR_IRQS) - return; - - desc = irq_desc + irq; - spin_lock_irqsave(&desc->lock,flags); - p = &desc->action; - for (;;) { - struct irqaction * action = *p; - if (action) { - struct irqaction **pp = p; - p = &action->next; - if (action->dev_id != dev_id) - continue; - - /* Found it - now remove it from the list of entries */ - *pp = action->next; - if (!desc->action) { - desc->status |= IRQ_DISABLED; - desc->handler->shutdown(irq); - } - spin_unlock_irqrestore(&desc->lock,flags); - - synchronize_irq(irq); - kfree(action); - return; - } - printk("Trying to free free IRQ%d\n",irq); - spin_unlock_irqrestore(&desc->lock,flags); - return; - } -} - -EXPORT_SYMBOL(free_irq); - -/* - * IRQ autodetection code.. - * - * This depends on the fact that any interrupt that - * comes in on to an unassigned handler will get stuck - * with "IRQ_WAITING" cleared and the interrupt - * disabled. - */ - -static DECLARE_MUTEX(probe_sem); - -/** - * probe_irq_on - begin an interrupt autodetect - * - * Commence probing for an interrupt. The interrupts are scanned - * and a mask of potential interrupt lines is returned. - * - */ - -unsigned long probe_irq_on(void) -{ - unsigned int i; - irq_desc_t *desc; - unsigned long val; - unsigned long delay; - - down(&probe_sem); - /* - * something may have generated an irq long ago and we want to - * flush such a longstanding irq before considering it as spurious. - */ - for (i = NR_IRQS-1; i > 0; i--) { - desc = irq_desc + i; - - spin_lock_irq(&desc->lock); - if (!irq_desc[i].action) - irq_desc[i].handler->startup(i); - spin_unlock_irq(&desc->lock); - } - - /* Wait for longstanding interrupts to trigger. */ - for (delay = jiffies + HZ/50; time_after(delay, jiffies); ) - /* about 20ms delay */ barrier(); - - /* - * enable any unassigned irqs - * (we must startup again here because if a longstanding irq - * happened in the previous stage, it may have masked itself) - */ - for (i = NR_IRQS-1; i > 0; i--) { - desc = irq_desc + i; - - spin_lock_irq(&desc->lock); - if (!desc->action) { - desc->status |= IRQ_AUTODETECT | IRQ_WAITING; - if (desc->handler->startup(i)) - desc->status |= IRQ_PENDING; - } - spin_unlock_irq(&desc->lock); - } - - /* - * Wait for spurious interrupts to trigger - */ - for (delay = jiffies + HZ/10; time_after(delay, jiffies); ) - /* about 100ms delay */ barrier(); - - /* - * Now filter out any obviously spurious interrupts - */ - val = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - /* It triggered already - consider it spurious. */ - if (!(status & IRQ_WAITING)) { - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } else - if (i < 32) - val |= 1 << i; - } - spin_unlock_irq(&desc->lock); - } - - return val; -} - -EXPORT_SYMBOL(probe_irq_on); - -/* - * Return a mask of triggered interrupts (this - * can handle only legacy ISA interrupts). - */ - -/** - * probe_irq_mask - scan a bitmap of interrupt lines - * @val: mask of interrupts to consider - * - * Scan the ISA bus interrupt lines and return a bitmap of - * active interrupts. The interrupt probe logic state is then - * returned to its previous value. - * - * Note: we need to scan all the irq's even though we will - * only return ISA irq numbers - just so that we reset them - * all to a known state. - */ -unsigned int probe_irq_mask(unsigned long val) -{ - int i; - unsigned int mask; - - mask = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - if (i < 16 && !(status & IRQ_WAITING)) - mask |= 1 << i; - - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } - spin_unlock_irq(&desc->lock); - } - up(&probe_sem); - - return mask & val; -} - -/* - * Return the one interrupt that triggered (this can - * handle any interrupt source). - */ - -/** - * probe_irq_off - end an interrupt autodetect - * @val: mask of potential interrupts (unused) - * - * Scans the unused interrupt lines and returns the line which - * appears to have triggered the interrupt. If no interrupt was - * found then zero is returned. If more than one interrupt is - * found then minus the first candidate is returned to indicate - * their is doubt. - * - * The interrupt probe logic state is returned to its previous - * value. - * - * BUGS: When used in a module (which arguably shouldnt happen) - * nothing prevents two IRQ probe callers from overlapping. The - * results of this are non-optimal. - */ - -int probe_irq_off(unsigned long val) -{ - int i, irq_found, nr_irqs; - - nr_irqs = 0; - irq_found = 0; - for (i = 0; i < NR_IRQS; i++) { - irq_desc_t *desc = irq_desc + i; - unsigned int status; - - spin_lock_irq(&desc->lock); - status = desc->status; - - if (status & IRQ_AUTODETECT) { - if (!(status & IRQ_WAITING)) { - if (!nr_irqs) - irq_found = i; - nr_irqs++; - } - desc->status = status & ~IRQ_AUTODETECT; - desc->handler->shutdown(i); - } - spin_unlock_irq(&desc->lock); - } - up(&probe_sem); - - if (nr_irqs > 1) - irq_found = -irq_found; - return irq_found; -} - -EXPORT_SYMBOL(probe_irq_off); - -/* this was setup_x86_irq but it seems pretty generic */ -int setup_irq(unsigned int irq, struct irqaction * new) -{ - int shared = 0; - unsigned long flags; - struct irqaction *old, **p; - irq_desc_t *desc = irq_desc + irq; - - /* - * Some drivers like serial.c use request_irq() heavily, - * so we have to be careful not to interfere with a - * running system. - */ - if (new->flags & SA_SAMPLE_RANDOM) { - /* - * This function might sleep, we want to call it first, - * outside of the atomic block. - * Yes, this might clear the entropy pool if the wrong - * driver is attempted to be loaded, without actually - * installing a new handler, but is this really a problem, - * only the sysadmin is able to do this. - */ - rand_initialize_irq(irq); - } - - /* - * The following block of code has to be executed atomically - */ - spin_lock_irqsave(&desc->lock,flags); - p = &desc->action; - if ((old = *p) != NULL) { - /* Can't share interrupts unless both agree to */ - if (!(old->flags & new->flags & SA_SHIRQ)) { - spin_unlock_irqrestore(&desc->lock,flags); - return -EBUSY; - } - - /* add new interrupt at end of irq queue */ - do { - p = &old->next; - old = *p; - } while (old); - shared = 1; - } - - *p = new; - - if (!shared) { - desc->depth = 0; - desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS); - desc->handler->startup(irq); - } - spin_unlock_irqrestore(&desc->lock,flags); - - /* register_irq_proc(irq); */ - return 0; -} - /* Initialize irq handling for IRQs. BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL to IRQ_TYPE. An IRQ_TYPE of 0 means to use a generic interrupt type. */ @@ -736,9 +121,3 @@ init_irq_handlers (int base_irq, int num, int interval, base_irq += interval; } } - -#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) -void init_irq_proc(void) -{ -} -#endif /* CONFIG_PROC_FS && CONFIG_SYSCTL */ diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c index 9c708c32c1f0..39cf247cdae4 100644 --- a/arch/v850/kernel/process.c +++ b/arch/v850/kernel/process.c @@ -36,11 +36,8 @@ extern void ret_from_fork (void); /* The idle loop. */ void default_idle (void) { - while (1) { - while (! need_resched ()) - asm ("halt; nop; nop; nop; nop; nop" ::: "cc"); - schedule (); - } + while (! need_resched ()) + asm ("halt; nop; nop; nop; nop; nop" ::: "cc"); } void (*idle)(void) = default_idle; @@ -54,7 +51,14 @@ void (*idle)(void) = default_idle; void cpu_idle (void) { /* endless idle loop with no priority at all */ - (*idle) (); + while (1) { + while (!need_resched()) + (*idle) (); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } /* diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c index d6077ff47d22..18492d02aaf6 100644 --- a/arch/v850/kernel/ptrace.c +++ b/arch/v850/kernel/ptrace.c @@ -113,45 +113,10 @@ static int set_single_step (struct task_struct *t, int val) return 1; } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int rval; - lock_kernel(); - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) { - rval = -EPERM; - goto out; - } - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - rval = 0; - goto out; - } - rval = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - rval = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - rval = ptrace_attach(child); - goto out_tsk; - } - rval = ptrace_check_attach(child, request == PTRACE_KILL); - if (rval < 0) - goto out_tsk; - switch (request) { unsigned long val, copied; @@ -248,11 +213,7 @@ long sys_ptrace(long request, long pid, long addr, long data) rval = -EIO; goto out; } - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return rval; } diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 21afa69a086d..6ece645e4dbe 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -226,22 +226,42 @@ config SCHED_SMT source "kernel/Kconfig.preempt" -config K8_NUMA - bool "K8 NUMA support" - select NUMA +config NUMA + bool "Non Uniform Memory Access (NUMA) Support" depends on SMP help - Enable NUMA (Non Unified Memory Architecture) support for - AMD Opteron Multiprocessor systems. The kernel will try to allocate - memory used by a CPU on the local memory controller of the CPU - and add some more NUMA awareness to the kernel. - This code is recommended on all multiprocessor Opteron systems - and normally doesn't hurt on others. + Enable NUMA (Non Uniform Memory Access) support. The kernel + will try to allocate memory used by a CPU on the local memory + controller of the CPU and add some more NUMA awareness to the kernel. + This code is recommended on all multiprocessor Opteron systems. + If the system is EM64T, you should say N unless your system is EM64T + NUMA. + +config K8_NUMA + bool "Old style AMD Opteron NUMA detection" + depends on NUMA + default y + help + Enable K8 NUMA node topology detection. You should say Y here if + you have a multi processor AMD K8 system. This uses an old + method to read the NUMA configurtion directly from the builtin + Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA + instead, which also takes priority if both are compiled in. + +# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig. + +config X86_64_ACPI_NUMA + bool "ACPI NUMA detection" + depends on NUMA + select ACPI + select ACPI_NUMA + default y + help + Enable ACPI SRAT based node topology detection. config NUMA_EMU - bool "NUMA emulation support" - select NUMA - depends on SMP + bool "NUMA emulation" + depends on NUMA help Enable NUMA emulation. A flat machine will be split into virtual nodes when booted with "numa=fake=N", where N is the @@ -252,9 +272,6 @@ config ARCH_DISCONTIGMEM_ENABLE depends on NUMA default y -config NUMA - bool - default n config ARCH_DISCONTIGMEM_ENABLE def_bool y @@ -374,6 +391,14 @@ config X86_MCE_INTEL Additional support for intel specific MCE features such as the thermal monitor. +config X86_MCE_AMD + bool "AMD MCE features" + depends on X86_MCE && X86_LOCAL_APIC + default y + help + Additional support for AMD specific MCE features such as + the DRAM Error Threshold. + config PHYSICAL_START hex "Physical address where the kernel is loaded" if EMBEDDED default "0x100000" @@ -502,7 +527,7 @@ config IA32_EMULATION left. config IA32_AOUT - bool "IA32 a.out support" + tristate "IA32 a.out support" depends on IA32_EMULATION help Support old a.out binaries in the 32bit emulation. @@ -532,8 +557,21 @@ source "drivers/firmware/Kconfig" source fs/Kconfig +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/x86_64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/x86_64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug index 9cf1410d2f5a..e2c6e64a85ec 100644 --- a/arch/x86_64/Kconfig.debug +++ b/arch/x86_64/Kconfig.debug @@ -2,15 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -# !SMP for now because the context switch early causes GPF in segment reloading -# and the GS base checking does the wrong thing then, causing a hang. -config CHECKING - bool "Additional run-time checks" - depends on DEBUG_KERNEL && !SMP - help - Enables some internal consistency checks for kernel debugging. - You should normally say N. - config INIT_DEBUG bool "Debug __init statements" depends on DEBUG_KERNEL @@ -33,16 +24,6 @@ config IOMMU_DEBUG options. See Documentation/x86_64/boot-options.txt for more details. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config IOMMU_LEAK bool "IOMMU leak tracing" depends on DEBUG_KERNEL diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index f8db7e500fbf..5d56542fb68f 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-git11 -# Mon Sep 12 16:16:16 2005 +# Linux kernel version: 2.6.14-git7 +# Sat Nov 5 15:55:50 2005 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -35,7 +35,7 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -93,10 +93,11 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y +CONFIG_NUMA=y CONFIG_K8_NUMA=y +CONFIG_X86_64_ACPI_NUMA=y # CONFIG_NUMA_EMU is not set CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_NUMA=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y @@ -107,9 +108,10 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_NR_CPUS=32 +CONFIG_HOTPLUG_CPU=y CONFIG_HPET_TIMER=y CONFIG_X86_PM_TIMER=y CONFIG_HPET_EMULATE_RTC=y @@ -117,6 +119,7 @@ CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y CONFIG_PHYSICAL_START=0x100000 # CONFIG_KEXEC is not set CONFIG_SECCOMP=y @@ -136,11 +139,15 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_SOFTWARE_SUSPEND=y CONFIG_PM_STD_PARTITION="" +CONFIG_SUSPEND_SMP=y # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y +CONFIG_ACPI_SLEEP_PROC_FS=y +CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y @@ -148,6 +155,7 @@ CONFIG_ACPI_BUTTON=y CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y # CONFIG_ACPI_ASUS is not set @@ -158,7 +166,7 @@ CONFIG_ACPI_BLACKLIST_YEAR=2001 CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=y # # CPU Frequency scaling @@ -293,7 +301,6 @@ CONFIG_IPV6=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -312,6 +319,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -354,6 +366,11 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ATA_OVER_ETH is not set # @@ -450,6 +467,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -469,20 +487,24 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=y # CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +CONFIG_SCSI_SATA_NV=y +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set CONFIG_SCSI_SATA_VIA=y # CONFIG_SCSI_SATA_VITESSE is not set +CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -525,6 +547,7 @@ CONFIG_BLK_DEV_DM=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -564,6 +587,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y # CONFIG_TYPHOON is not set @@ -740,7 +764,43 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=y +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_I8XX_TCO is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_RTC=y @@ -767,6 +827,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -783,6 +844,7 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_HDAPS is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -886,12 +948,15 @@ CONFIG_USB_UHCI_HCD=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -924,6 +989,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1005,7 +1071,7 @@ CONFIG_USB_MON=y # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set -CONFIG_DCDBAS=m +# CONFIG_DCDBAS is not set # # File systems @@ -1037,7 +1103,7 @@ CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y -# CONFIG_AUTOFS4_FS is not set +CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # @@ -1068,7 +1134,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +CONFIG_RELAYFS_FS=y # # Miscellaneous filesystems @@ -1186,7 +1252,9 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_INIT_DEBUG=y # CONFIG_IOMMU_DEBUG is not set CONFIG_KPROBES=y diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c index 93c60f4aa47a..3bf58af98936 100644 --- a/arch/x86_64/ia32/ia32_aout.c +++ b/arch/x86_64/ia32/ia32_aout.c @@ -36,9 +36,6 @@ #undef WARN_OLD #undef CORE_DUMP /* probably broken */ -extern int ia32_setup_arg_pages(struct linux_binprm *bprm, - unsigned long stack_top, int exec_stack); - static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs); static int load_aout_library(struct file*); diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index d9161e395978..830feb272eca 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -335,7 +335,8 @@ static void elf32_init(struct pt_regs *regs) me->thread.es = __USER_DS; } -int setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int executable_stack) +int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, + int executable_stack) { unsigned long stack_base; struct vm_area_struct *mpnt; @@ -389,6 +390,7 @@ int setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int exec return 0; } +EXPORT_SYMBOL(ia32_setup_arg_pages); static unsigned long elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type) diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c index 4ba0e293d5e5..e335bd0b637d 100644 --- a/arch/x86_64/ia32/ia32_ioctl.c +++ b/arch/x86_64/ia32/ia32_ioctl.c @@ -64,12 +64,6 @@ struct ioctl_trans ioctl_start[] = { #include <linux/compat_ioctl.h> #define DECLARES #include "compat_ioctl.c" -COMPATIBLE_IOCTL(HDIO_SET_KEEPSETTINGS) -COMPATIBLE_IOCTL(HDIO_SCAN_HWIF) -COMPATIBLE_IOCTL(BLKRASET) -COMPATIBLE_IOCTL(0x4B50) /* KDGHWCLK - not in the kernel, but don't complain */ -COMPATIBLE_IOCTL(0x4B51) /* KDSHWCLK - not in the kernel, but don't complain */ -COMPATIBLE_IOCTL(FIOQSIZE) /* And these ioctls need translation */ /* realtime device */ diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 14328cab5d3a..fe4cbd1c4b2f 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -11,6 +11,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ obj-$(CONFIG_X86_MCE) += mce.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o +obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/ obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_MSR) += msr.o diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index 962ad4823b6a..c7f4fdd20f05 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -196,7 +196,7 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) void __init iommu_hole_init(void) { int fix, num; - u32 aper_size, aper_alloc = 0, aper_order, last_aper_order = 0; + u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; int valid_agp = 0; diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index b6e7715d877f..18691ce4c759 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -833,6 +833,16 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } +#ifdef CONFIG_X86_MCE_AMD +void setup_threshold_lvt(unsigned long lvt_off) +{ + unsigned int v = 0; + unsigned long reg = (lvt_off << 4) + 0x500; + v |= THRESHOLD_APIC_VECTOR; + apic_write(reg, v); +} +#endif /* CONFIG_X86_MCE_AMD */ + #undef APIC_DIVISOR /* diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index ab3f87aaff70..17579a1a174b 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -23,8 +23,7 @@ #include <asm/e820.h> #include <asm/proto.h> #include <asm/bootsetup.h> - -extern char _end[]; +#include <asm/sections.h> /* * PFN of last memory page. diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 7937971d1853..9ff42041bb6b 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -612,6 +612,9 @@ retint_kernel: ENTRY(thermal_interrupt) apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt +ENTRY(threshold_interrupt) + apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt + #ifdef CONFIG_SMP ENTRY(reschedule_interrupt) apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index b92e5f45ed46..15290968e49d 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <linux/threads.h> +#include <linux/init.h> #include <asm/desc.h> #include <asm/segment.h> #include <asm/page.h> @@ -70,7 +71,7 @@ startup_32: movl %eax, %cr4 /* Setup early boot stage 4 level pagetables */ - movl $(init_level4_pgt - __START_KERNEL_map), %eax + movl $(boot_level4_pgt - __START_KERNEL_map), %eax movl %eax, %cr3 /* Setup EFER (Extended Feature Enable Register) */ @@ -113,7 +114,7 @@ startup_64: movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ - movq $(init_level4_pgt - __START_KERNEL_map), %rax + movq $(boot_level4_pgt - __START_KERNEL_map), %rax movq %rax, %cr3 /* Check if nx is implemented */ @@ -240,20 +241,10 @@ ljumpvector: ENTRY(stext) ENTRY(_stext) - /* - * This default setting generates an ident mapping at address 0x100000 - * and a mapping for the kernel that precisely maps virtual address - * 0xffffffff80000000 to physical address 0x000000. (always using - * 2Mbyte large pages provided by PAE mode) - */ .org 0x1000 ENTRY(init_level4_pgt) - .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt */ - .fill 255,8,0 - .quad 0x000000000000a007 + __PHYSICAL_START - .fill 254,8,0 - /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */ + /* This gets initialized in x86_64_start_kernel */ + .fill 512,8,0 .org 0x2000 ENTRY(level3_ident_pgt) @@ -350,6 +341,24 @@ ENTRY(wakeup_level4_pgt) .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */ #endif +#ifndef CONFIG_HOTPLUG_CPU + __INITDATA +#endif + /* + * This default setting generates an ident mapping at address 0x100000 + * and a mapping for the kernel that precisely maps virtual address + * 0xffffffff80000000 to physical address 0x000000. (always using + * 2Mbyte large pages provided by PAE mode) + */ + .align PAGE_SIZE +ENTRY(boot_level4_pgt) + .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt */ + .fill 255,8,0 + .quad 0x000000000000a007 + __PHYSICAL_START + .fill 254,8,0 + /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ + .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */ + .data .align 16 diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c index cf6ab147a2a5..b675c5add01e 100644 --- a/arch/x86_64/kernel/head64.c +++ b/arch/x86_64/kernel/head64.c @@ -19,14 +19,15 @@ #include <asm/bootsetup.h> #include <asm/setup.h> #include <asm/desc.h> +#include <asm/pgtable.h> +#include <asm/sections.h> /* Don't add a printk in there. printk relies on the PDA which is not initialized yet. */ static void __init clear_bss(void) { - extern char __bss_start[], __bss_end[]; memset(__bss_start, 0, - (unsigned long) __bss_end - (unsigned long) __bss_start); + (unsigned long) __bss_stop - (unsigned long) __bss_start); } #define NEW_CL_POINTER 0x228 /* Relative to real mode data */ @@ -75,8 +76,6 @@ static void __init setup_boot_cpu_data(void) boot_cpu_data.x86_mask = eax & 0xf; } -extern char _end[]; - void __init x86_64_start_kernel(char * real_mode_data) { char *s; @@ -86,6 +85,13 @@ void __init x86_64_start_kernel(char * real_mode_data) set_intr_gate(i, early_idt_handler); asm volatile("lidt %0" :: "m" (idt_descr)); clear_bss(); + + /* + * switch to init_level4_pgt from boot_level4_pgt + */ + memcpy(init_level4_pgt, boot_level4_pgt, PTRS_PER_PGD*sizeof(pgd_t)); + asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt))); + pda_init(0); copy_bootdata(real_mode_data); #ifdef CONFIG_SMP diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index c6c9791d77c1..6e5101ad3d1a 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -492,6 +492,7 @@ void invalidate_interrupt5(void); void invalidate_interrupt6(void); void invalidate_interrupt7(void); void thermal_interrupt(void); +void threshold_interrupt(void); void i8254_timer_resume(void); static void setup_timer_hardware(void) @@ -515,7 +516,7 @@ void i8254_timer_resume(void) } static struct sysdev_class timer_sysclass = { - set_kset_name("timer"), + set_kset_name("timer_pit"), .resume = timer_resume, }; @@ -580,6 +581,7 @@ void __init init_IRQ(void) set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); #endif set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); #ifdef CONFIG_X86_LOCAL_APIC /* self generated IPI for local APIC timer */ diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index c8eee20cd519..97154ab058b4 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -57,7 +57,7 @@ int nr_ioapic_registers[MAX_IO_APICS]; * Rough estimation of how many shared IRQs there are, can * be changed anytime. */ -#define MAX_PLUS_SHARED_IRQS NR_IRQS +#define MAX_PLUS_SHARED_IRQS NR_IRQ_VECTORS #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) /* @@ -85,6 +85,7 @@ int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; int pin; \ struct irq_pin_list *entry = irq_2_pin + irq; \ \ + BUG_ON(irq >= NR_IRQS); \ for (;;) { \ unsigned int reg; \ pin = entry->pin; \ @@ -127,6 +128,8 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) } #endif +static u8 gsi_2_irq[NR_IRQ_VECTORS] = { [0 ... NR_IRQ_VECTORS-1] = 0xFF }; + /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super @@ -137,6 +140,7 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) static int first_free_entry = NR_IRQS; struct irq_pin_list *entry = irq_2_pin + irq; + BUG_ON(irq >= NR_IRQS); while (entry->next) entry = irq_2_pin + entry->next; @@ -144,7 +148,7 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->next = first_free_entry; entry = irq_2_pin + entry->next; if (++first_free_entry >= PIN_MAP_SIZE) - panic("io_apic.c: whoops"); + panic("io_apic.c: ran out of irq_2_pin entries!"); } entry->apic = apic; entry->pin = pin; @@ -420,6 +424,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) best_guess = irq; } } + BUG_ON(best_guess >= NR_IRQS); return best_guess; } @@ -610,6 +615,64 @@ static inline int irq_trigger(int idx) return MPBIOS_trigger(idx); } +static int next_irq = 16; + +/* + * gsi_irq_sharing -- Name overload! "irq" can be either a legacy IRQ + * in the range 0-15, a linux IRQ in the range 0-223, or a GSI number + * from ACPI, which can reach 800 in large boxen. + * + * Compact the sparse GSI space into a sequential IRQ series and reuse + * vectors if possible. + */ +int gsi_irq_sharing(int gsi) +{ + int i, tries, vector; + + BUG_ON(gsi >= NR_IRQ_VECTORS); + + if (platform_legacy_irq(gsi)) + return gsi; + + if (gsi_2_irq[gsi] != 0xFF) + return (int)gsi_2_irq[gsi]; + + tries = NR_IRQS; + try_again: + vector = assign_irq_vector(gsi); + + /* + * Sharing vectors means sharing IRQs, so scan irq_vectors for previous + * use of vector and if found, return that IRQ. However, we never want + * to share legacy IRQs, which usually have a different trigger mode + * than PCI. + */ + for (i = 0; i < NR_IRQS; i++) + if (IO_APIC_VECTOR(i) == vector) + break; + if (platform_legacy_irq(i)) { + if (--tries >= 0) { + IO_APIC_VECTOR(i) = 0; + goto try_again; + } + panic("gsi_irq_sharing: didn't find an IRQ using vector 0x%02X for GSI %d", vector, gsi); + } + if (i < NR_IRQS) { + gsi_2_irq[gsi] = i; + printk(KERN_INFO "GSI %d sharing vector 0x%02X and IRQ %d\n", + gsi, vector, i); + return i; + } + + i = next_irq++; + BUG_ON(i >= NR_IRQS); + gsi_2_irq[gsi] = i; + IO_APIC_VECTOR(i) = vector; + printk(KERN_INFO "GSI %d assigned vector 0x%02X and IRQ %d\n", + gsi, vector, i); + return i; +} + static int pin_2_irq(int idx, int apic, int pin) { int irq, i; @@ -639,6 +702,7 @@ static int pin_2_irq(int idx, int apic, int pin) while (i < apic) irq += nr_ioapic_registers[i++]; irq += pin; + irq = gsi_irq_sharing(irq); break; } default: @@ -648,6 +712,7 @@ static int pin_2_irq(int idx, int apic, int pin) break; } } + BUG_ON(irq >= NR_IRQS); /* * PCI IRQ command line redirection. Yes, limits are hardcoded. @@ -663,6 +728,7 @@ static int pin_2_irq(int idx, int apic, int pin) } } } + BUG_ON(irq >= NR_IRQS); return irq; } @@ -690,8 +756,8 @@ int assign_irq_vector(int irq) { static int current_vector = FIRST_DEVICE_VECTOR, offset = 0; - BUG_ON(irq >= NR_IRQ_VECTORS); - if (IO_APIC_VECTOR(irq) > 0) + BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS); + if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) return IO_APIC_VECTOR(irq); next: current_vector += 8; @@ -699,9 +765,8 @@ next: goto next; if (current_vector >= FIRST_SYSTEM_VECTOR) { - offset++; - if (!(offset%8)) - return -ENOSPC; + /* If we run out of vectors on large boxen, must share them. */ + offset = (offset + 1) % 8; current_vector = FIRST_DEVICE_VECTOR + offset; } @@ -1917,6 +1982,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a entry.polarity = active_high_low; entry.mask = 1; /* Disabled (masked) */ + irq = gsi_irq_sharing(irq); /* * IRQs < 16 are already in the irq_2_pin[] map */ diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 76a28b007be9..dddeb678b440 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -34,7 +34,6 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/preempt.h> @@ -44,17 +43,10 @@ #include <asm/kdebug.h> static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_old_rflags, kprobe_saved_rflags; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_old_rflags_prev, kprobe_saved_rflags_prev; -static struct pt_regs jprobe_saved_regs; -static long *jprobe_saved_rsp; void jprobe_return_end(void); -/* copy of the kernel stack at the probe fire time */ -static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); /* * returns non-zero if opcode modifies the interrupt flag. @@ -236,29 +228,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) up(&kprobe_mutex); } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_old_rflags_prev = kprobe_old_rflags; - kprobe_saved_rflags_prev = kprobe_saved_rflags; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_rflags = kcb->kprobe_old_rflags; + kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_old_rflags = kprobe_old_rflags_prev; - kprobe_saved_rflags = kprobe_saved_rflags_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_rflags = kcb->prev_kprobe.old_rflags; + kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; - kprobe_saved_rflags = kprobe_old_rflags + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_rflags = kcb->kprobe_old_rflags = (regs->eflags & (TF_MASK | IF_MASK)); if (is_IF_modifier(p->ainsn.insn)) - kprobe_saved_rflags &= ~IF_MASK; + kcb->kprobe_saved_rflags &= ~IF_MASK; } static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -272,6 +265,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->rip = (unsigned long)p->ainsn.insn; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -292,32 +286,30 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, } } -/* - * Interrupts are disabled on entry as trap3 is an interrupt gate and they - * remain disabled thorough out this function. - */ int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t)); + struct kprobe_ctlblk *kcb; - /* We're in an interrupt, but this is clear and BUG()-safe. */ + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; - regs->eflags |= kprobe_saved_rflags; - unlock_kprobes(); + regs->eflags |= kcb->kprobe_saved_rflags; goto no_kprobe; - } else if (kprobe_status == KPROBE_HIT_SSDONE) { + } else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) { /* TODO: Provide re-entrancy from * post_kprobes_handler() and avoid exception * stack corruption while single-stepping on @@ -325,6 +317,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) */ arch_disarm_kprobe(p); regs->rip = (unsigned long)p->addr; + reset_current_kprobe(); ret = 1; } else { /* We have reentered the kprobe_handler(), since @@ -334,27 +327,24 @@ int __kprobes kprobe_handler(struct pt_regs *regs) * of the new probe without calling any user * handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -372,8 +362,8 @@ int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p, regs); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -381,7 +371,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -409,9 +399,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -450,13 +441,14 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->rip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -483,7 +475,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)regs->rsp; unsigned long next_rip = 0; @@ -498,7 +491,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) switch (*insn) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); - *tos |= kprobe_old_rflags; + *tos |= kcb->kprobe_old_rflags; break; case 0xc3: /* ret/lret */ case 0xcb: @@ -537,30 +530,28 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) } } -/* - * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. And we hold kprobe lock. - */ int __kprobes post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_saved_rflags; + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_rflags; /* Restore the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; - } else { - unlock_kprobes(); } + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -575,18 +566,19 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_old_rflags; + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_old_rflags; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -599,39 +591,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs = *regs; - jprobe_saved_rsp = (long *) regs->rsp; - addr = (unsigned long)jprobe_saved_rsp; + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_rsp = (long *) regs->rsp; + addr = (unsigned long)(kcb->jprobe_saved_rsp); /* * As Linus pointed out, gcc assumes that the callee * owns the argument space and could overwrite it, e.g. @@ -639,7 +633,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) * we also save and restore enough stack bytes to cover * the argument area. */ - memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr)); + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); regs->eflags &= ~IF_MASK; regs->rip = (unsigned long)(jp->entry); return 1; @@ -647,36 +642,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + asm volatile (" xchg %%rbx,%%rsp \n" " int3 \n" " .globl jprobe_return_end \n" " jprobe_return_end: \n" " nop \n"::"b" - (jprobe_saved_rsp):"memory"); + (kcb->jprobe_saved_rsp):"memory"); } int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->rip - 1); - unsigned long stack_addr = (unsigned long)jprobe_saved_rsp; + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_rsp); struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if ((long *)regs->rsp != jprobe_saved_rsp) { + if ((long *)regs->rsp != kcb->jprobe_saved_rsp) { struct pt_regs *saved_regs = - container_of(jprobe_saved_rsp, struct pt_regs, rsp); + container_of(kcb->jprobe_saved_rsp, + struct pt_regs, rsp); printk("current rsp %p does not match saved rsp %p\n", - (long *)regs->rsp, jprobe_saved_rsp); + (long *)regs->rsp, kcb->jprobe_saved_rsp); printk("Saved registers for jprobe %p\n", jp); show_registers(saved_regs); printk("Current registers\n"); show_registers(regs); BUG(); } - *regs = jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack, + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 69541db5ff2c..183dc6105429 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -37,7 +37,7 @@ static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; static unsigned long console_logged; static int notify_user; static int rip_msr; -static int mce_bootlog; +static int mce_bootlog = 1; /* * Lockless MCE logging infrastructure. @@ -347,7 +347,11 @@ static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c) /* disable GART TBL walk error reporting, which trips off incorrectly with the IOMMU & 3ware & Cerberus. */ clear_bit(10, &bank[4]); + /* Lots of broken BIOS around that don't clear them + by default and leave crap in there. Don't log. */ + mce_bootlog = 0; } + } static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) @@ -356,6 +360,9 @@ static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) case X86_VENDOR_INTEL: mce_intel_feature_init(c); break; + case X86_VENDOR_AMD: + mce_amd_feature_init(c); + break; default: break; } @@ -495,16 +502,16 @@ static int __init mcheck_disable(char *str) /* mce=off disables machine check. Note you can reenable it later using sysfs. mce=TOLERANCELEVEL (number, see above) - mce=bootlog Log MCEs from before booting. Disabled by default to work - around buggy BIOS that leave bogus MCEs. */ + mce=bootlog Log MCEs from before booting. Disabled by default on AMD. + mce=nobootlog Don't log MCEs from before booting. */ static int __init mcheck_enable(char *str) { if (*str == '=') str++; if (!strcmp(str, "off")) mce_dont_init = 1; - else if (!strcmp(str, "bootlog")) - mce_bootlog = 1; + else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog")) + mce_bootlog = str[0] == 'b'; else if (isdigit(str[0])) get_option(&str, &tolerant); else diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c new file mode 100644 index 000000000000..1f76175ace02 --- /dev/null +++ b/arch/x86_64/kernel/mce_amd.c @@ -0,0 +1,538 @@ +/* + * (c) 2005 Advanced Micro Devices, Inc. + * Your use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + * + * Written by Jacob Shin - AMD, Inc. + * + * Support : jacob.shin@amd.com + * + * MC4_MISC0 DRAM ECC Error Threshold available under AMD K8 Rev F. + * MC4_MISC0 exists per physical processor. + * + */ + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kobject.h> +#include <linux/notifier.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/sysdev.h> +#include <linux/sysfs.h> +#include <asm/apic.h> +#include <asm/mce.h> +#include <asm/msr.h> +#include <asm/percpu.h> + +#define PFX "mce_threshold: " +#define VERSION "version 1.00.9" +#define NR_BANKS 5 +#define THRESHOLD_MAX 0xFFF +#define INT_TYPE_APIC 0x00020000 +#define MASK_VALID_HI 0x80000000 +#define MASK_LVTOFF_HI 0x00F00000 +#define MASK_COUNT_EN_HI 0x00080000 +#define MASK_INT_TYPE_HI 0x00060000 +#define MASK_OVERFLOW_HI 0x00010000 +#define MASK_ERR_COUNT_HI 0x00000FFF +#define MASK_OVERFLOW 0x0001000000000000L + +struct threshold_bank { + unsigned int cpu; + u8 bank; + u8 interrupt_enable; + u16 threshold_limit; + struct kobject kobj; +}; + +static struct threshold_bank threshold_defaults = { + .interrupt_enable = 0, + .threshold_limit = THRESHOLD_MAX, +}; + +#ifdef CONFIG_SMP +static unsigned char shared_bank[NR_BANKS] = { + 0, 0, 0, 0, 1 +}; +#endif + +static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */ + +/* + * CPU Initialization + */ + +/* must be called with correct cpu affinity */ +static void threshold_restart_bank(struct threshold_bank *b, + int reset, u16 old_limit) +{ + u32 mci_misc_hi, mci_misc_lo; + + rdmsr(MSR_IA32_MC0_MISC + b->bank * 4, mci_misc_lo, mci_misc_hi); + + if (b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX)) + reset = 1; /* limit cannot be lower than err count */ + + if (reset) { /* reset err count and overflow bit */ + mci_misc_hi = + (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | + (THRESHOLD_MAX - b->threshold_limit); + } else if (old_limit) { /* change limit w/o reset */ + int new_count = (mci_misc_hi & THRESHOLD_MAX) + + (old_limit - b->threshold_limit); + mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) | + (new_count & THRESHOLD_MAX); + } + + b->interrupt_enable ? + (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : + (mci_misc_hi &= ~MASK_INT_TYPE_HI); + + mci_misc_hi |= MASK_COUNT_EN_HI; + wrmsr(MSR_IA32_MC0_MISC + b->bank * 4, mci_misc_lo, mci_misc_hi); +} + +void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) +{ + int bank; + u32 mci_misc_lo, mci_misc_hi; + unsigned int cpu = smp_processor_id(); + + for (bank = 0; bank < NR_BANKS; ++bank) { + rdmsr(MSR_IA32_MC0_MISC + bank * 4, mci_misc_lo, mci_misc_hi); + + /* !valid, !counter present, bios locked */ + if (!(mci_misc_hi & MASK_VALID_HI) || + !(mci_misc_hi & MASK_VALID_HI >> 1) || + (mci_misc_hi & MASK_VALID_HI >> 2)) + continue; + + per_cpu(bank_map, cpu) |= (1 << bank); + +#ifdef CONFIG_SMP + if (shared_bank[bank] && cpu_core_id[cpu]) + continue; +#endif + + setup_threshold_lvt((mci_misc_hi & MASK_LVTOFF_HI) >> 20); + threshold_defaults.cpu = cpu; + threshold_defaults.bank = bank; + threshold_restart_bank(&threshold_defaults, 0, 0); + } +} + +/* + * APIC Interrupt Handler + */ + +/* + * threshold interrupt handler will service THRESHOLD_APIC_VECTOR. + * the interrupt goes off when error_count reaches threshold_limit. + * the handler will simply log mcelog w/ software defined bank number. + */ +asmlinkage void mce_threshold_interrupt(void) +{ + int bank; + struct mce m; + + ack_APIC_irq(); + irq_enter(); + + memset(&m, 0, sizeof(m)); + rdtscll(m.tsc); + m.cpu = smp_processor_id(); + + /* assume first bank caused it */ + for (bank = 0; bank < NR_BANKS; ++bank) { + m.bank = MCE_THRESHOLD_BASE + bank; + rdmsrl(MSR_IA32_MC0_MISC + bank * 4, m.misc); + + if (m.misc & MASK_OVERFLOW) { + mce_log(&m); + goto out; + } + } + out: + irq_exit(); +} + +/* + * Sysfs Interface + */ + +static struct sysdev_class threshold_sysclass = { + set_kset_name("threshold"), +}; + +static DEFINE_PER_CPU(struct sys_device, device_threshold); + +struct threshold_attr { + struct attribute attr; + ssize_t(*show) (struct threshold_bank *, char *); + ssize_t(*store) (struct threshold_bank *, const char *, size_t count); +}; + +static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]); + +static cpumask_t affinity_set(unsigned int cpu) +{ + cpumask_t oldmask = current->cpus_allowed; + cpumask_t newmask = CPU_MASK_NONE; + cpu_set(cpu, newmask); + set_cpus_allowed(current, newmask); + return oldmask; +} + +static void affinity_restore(cpumask_t oldmask) +{ + set_cpus_allowed(current, oldmask); +} + +#define SHOW_FIELDS(name) \ + static ssize_t show_ ## name(struct threshold_bank * b, char *buf) \ + { \ + return sprintf(buf, "%lx\n", (unsigned long) b->name); \ + } +SHOW_FIELDS(interrupt_enable) +SHOW_FIELDS(threshold_limit) + +static ssize_t store_interrupt_enable(struct threshold_bank *b, + const char *buf, size_t count) +{ + char *end; + cpumask_t oldmask; + unsigned long new = simple_strtoul(buf, &end, 0); + if (end == buf) + return -EINVAL; + b->interrupt_enable = !!new; + + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 0, 0); + affinity_restore(oldmask); + + return end - buf; +} + +static ssize_t store_threshold_limit(struct threshold_bank *b, + const char *buf, size_t count) +{ + char *end; + cpumask_t oldmask; + u16 old; + unsigned long new = simple_strtoul(buf, &end, 0); + if (end == buf) + return -EINVAL; + if (new > THRESHOLD_MAX) + new = THRESHOLD_MAX; + if (new < 1) + new = 1; + old = b->threshold_limit; + b->threshold_limit = new; + + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 0, old); + affinity_restore(oldmask); + + return end - buf; +} + +static ssize_t show_error_count(struct threshold_bank *b, char *buf) +{ + u32 high, low; + cpumask_t oldmask; + oldmask = affinity_set(b->cpu); + rdmsr(MSR_IA32_MC0_MISC + b->bank * 4, low, high); /* ignore low 32 */ + affinity_restore(oldmask); + return sprintf(buf, "%x\n", + (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit)); +} + +static ssize_t store_error_count(struct threshold_bank *b, + const char *buf, size_t count) +{ + cpumask_t oldmask; + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 1, 0); + affinity_restore(oldmask); + return 1; +} + +#define THRESHOLD_ATTR(_name,_mode,_show,_store) { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +}; + +#define ATTR_FIELDS(name) \ + static struct threshold_attr name = \ + THRESHOLD_ATTR(name, 0644, show_## name, store_## name) + +ATTR_FIELDS(interrupt_enable); +ATTR_FIELDS(threshold_limit); +ATTR_FIELDS(error_count); + +static struct attribute *default_attrs[] = { + &interrupt_enable.attr, + &threshold_limit.attr, + &error_count.attr, + NULL +}; + +#define to_bank(k) container_of(k,struct threshold_bank,kobj) +#define to_attr(a) container_of(a,struct threshold_attr,attr) + +static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) +{ + struct threshold_bank *b = to_bank(kobj); + struct threshold_attr *a = to_attr(attr); + ssize_t ret; + ret = a->show ? a->show(b, buf) : -EIO; + return ret; +} + +static ssize_t store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct threshold_bank *b = to_bank(kobj); + struct threshold_attr *a = to_attr(attr); + ssize_t ret; + ret = a->store ? a->store(b, buf, count) : -EIO; + return ret; +} + +static struct sysfs_ops threshold_ops = { + .show = show, + .store = store, +}; + +static struct kobj_type threshold_ktype = { + .sysfs_ops = &threshold_ops, + .default_attrs = default_attrs, +}; + +/* symlinks sibling shared banks to first core. first core owns dir/files. */ +static __cpuinit int threshold_create_bank(unsigned int cpu, int bank) +{ + int err = 0; + struct threshold_bank *b = 0; + +#ifdef CONFIG_SMP + if (cpu_core_id[cpu] && shared_bank[bank]) { /* symlink */ + char name[16]; + unsigned lcpu = first_cpu(cpu_core_map[cpu]); + if (cpu_core_id[lcpu]) + goto out; /* first core not up yet */ + + b = per_cpu(threshold_banks, lcpu)[bank]; + if (!b) + goto out; + sprintf(name, "bank%i", bank); + err = sysfs_create_link(&per_cpu(device_threshold, cpu).kobj, + &b->kobj, name); + if (err) + goto out; + per_cpu(threshold_banks, cpu)[bank] = b; + goto out; + } +#endif + + b = kmalloc(sizeof(struct threshold_bank), GFP_KERNEL); + if (!b) { + err = -ENOMEM; + goto out; + } + memset(b, 0, sizeof(struct threshold_bank)); + + b->cpu = cpu; + b->bank = bank; + b->interrupt_enable = 0; + b->threshold_limit = THRESHOLD_MAX; + kobject_set_name(&b->kobj, "bank%i", bank); + b->kobj.parent = &per_cpu(device_threshold, cpu).kobj; + b->kobj.ktype = &threshold_ktype; + + err = kobject_register(&b->kobj); + if (err) { + kfree(b); + goto out; + } + per_cpu(threshold_banks, cpu)[bank] = b; + out: + return err; +} + +/* create dir/files for all valid threshold banks */ +static __cpuinit int threshold_create_device(unsigned int cpu) +{ + int bank; + int err = 0; + + per_cpu(device_threshold, cpu).id = cpu; + per_cpu(device_threshold, cpu).cls = &threshold_sysclass; + err = sysdev_register(&per_cpu(device_threshold, cpu)); + if (err) + goto out; + + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + err = threshold_create_bank(cpu, bank); + if (err) + goto out; + } + out: + return err; +} + +#ifdef CONFIG_HOTPLUG_CPU +/* + * let's be hotplug friendly. + * in case of multiple core processors, the first core always takes ownership + * of shared sysfs dir/files, and rest of the cores will be symlinked to it. + */ + +/* cpu hotplug call removes all symlinks before first core dies */ +static __cpuinit void threshold_remove_bank(unsigned int cpu, int bank) +{ + struct threshold_bank *b; + char name[16]; + + b = per_cpu(threshold_banks, cpu)[bank]; + if (!b) + return; + if (shared_bank[bank] && atomic_read(&b->kobj.kref.refcount) > 2) { + sprintf(name, "bank%i", bank); + sysfs_remove_link(&per_cpu(device_threshold, cpu).kobj, name); + per_cpu(threshold_banks, cpu)[bank] = 0; + } else { + kobject_unregister(&b->kobj); + kfree(per_cpu(threshold_banks, cpu)[bank]); + } +} + +static __cpuinit void threshold_remove_device(unsigned int cpu) +{ + int bank; + + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + threshold_remove_bank(cpu, bank); + } + sysdev_unregister(&per_cpu(device_threshold, cpu)); +} + +/* link all existing siblings when first core comes up */ +static __cpuinit int threshold_create_symlinks(unsigned int cpu) +{ + int bank, err = 0; + unsigned int lcpu = 0; + + if (cpu_core_id[cpu]) + return 0; + for_each_cpu_mask(lcpu, cpu_core_map[cpu]) { + if (lcpu == cpu) + continue; + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + if (!shared_bank[bank]) + continue; + err = threshold_create_bank(lcpu, bank); + } + } + return err; +} + +/* remove all symlinks before first core dies. */ +static __cpuinit void threshold_remove_symlinks(unsigned int cpu) +{ + int bank; + unsigned int lcpu = 0; + if (cpu_core_id[cpu]) + return; + for_each_cpu_mask(lcpu, cpu_core_map[cpu]) { + if (lcpu == cpu) + continue; + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + if (!shared_bank[bank]) + continue; + threshold_remove_bank(lcpu, bank); + } + } +} +#else /* !CONFIG_HOTPLUG_CPU */ +static __cpuinit void threshold_create_symlinks(unsigned int cpu) +{ +} +static __cpuinit void threshold_remove_symlinks(unsigned int cpu) +{ +} +static void threshold_remove_device(unsigned int cpu) +{ +} +#endif + +/* get notified when a cpu comes on/off */ +static __cpuinit int threshold_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + /* cpu was unsigned int to begin with */ + unsigned int cpu = (unsigned long)hcpu; + + if (cpu >= NR_CPUS) + goto out; + + switch (action) { + case CPU_ONLINE: + threshold_create_device(cpu); + threshold_create_symlinks(cpu); + break; + case CPU_DOWN_PREPARE: + threshold_remove_symlinks(cpu); + break; + case CPU_DOWN_FAILED: + threshold_create_symlinks(cpu); + break; + case CPU_DEAD: + threshold_remove_device(cpu); + break; + default: + break; + } + out: + return NOTIFY_OK; +} + +static struct notifier_block threshold_cpu_notifier = { + .notifier_call = threshold_cpu_callback, +}; + +static __init int threshold_init_device(void) +{ + int err; + int lcpu = 0; + + err = sysdev_class_register(&threshold_sysclass); + if (err) + goto out; + + /* to hit CPUs online before the notifier is up */ + for_each_online_cpu(lcpu) { + err = threshold_create_device(lcpu); + if (err) + goto out; + } + register_cpu_notifier(&threshold_cpu_notifier); + + out: + return err; +} + +device_initcall(threshold_init_device); diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index f16d38d09daf..1105250bf02c 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -42,7 +42,7 @@ int acpi_found_madt; * Various Linux-internal data structures created from the * MP-table. */ -int apic_version [MAX_APICS]; +unsigned char apic_version [MAX_APICS]; unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; @@ -65,7 +65,9 @@ unsigned long mp_lapic_addr = 0; /* Processor that is doing the boot up */ unsigned int boot_cpu_id = -1U; /* Internal processor count */ -static unsigned int num_processors = 0; +unsigned int num_processors __initdata = 0; + +unsigned disabled_cpus __initdata; /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; @@ -106,11 +108,14 @@ static int __init mpf_checksum(unsigned char *mp, int len) static void __init MP_processor_info (struct mpc_config_processor *m) { - int ver, cpu; + int cpu; + unsigned char ver; static int found_bsp=0; - if (!(m->mpc_cpuflag & CPU_ENABLED)) + if (!(m->mpc_cpuflag & CPU_ENABLED)) { + disabled_cpus++; return; + } printk(KERN_INFO "Processor #%d %d:%d APIC version %d\n", m->mpc_apicid, @@ -129,12 +134,14 @@ static void __init MP_processor_info (struct mpc_config_processor *m) } cpu = num_processors++; - - if (m->mpc_apicid > MAX_APICS) { + +#if MAX_APICS < 255 + if ((int)m->mpc_apicid > MAX_APICS) { printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", m->mpc_apicid, MAX_APICS); return; } +#endif ver = m->mpc_apicver; physid_set(m->mpc_apicid, phys_cpu_present_map); @@ -218,7 +225,7 @@ static void __init MP_intsrc_info (struct mpc_config_intsrc *m) m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - if (++mp_irq_entries == MAX_IRQ_SOURCES) + if (++mp_irq_entries >= MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); } @@ -549,7 +556,7 @@ void __init get_smp_config (void) * Read the physical hardware table. Anything here will * override the defaults. */ - if (!smp_read_mpc((void *)(unsigned long)mpf->mpf_physptr)) { + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { smp_found_config = 0; printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index 88be97c96987..2e28e855ec3c 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -220,6 +220,12 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, uses the normal dma_mask for alloc_coherent. */ dma_mask &= *dev->dma_mask; + /* Why <=? Even when the mask is smaller than 4GB it is often larger + than 16MB and in this case we have a chance of finding fitting memory + in the next higher zone first. If not retry with true GFP_DMA. -AK */ + if (dma_mask <= 0xffffffff) + gfp |= GFP_DMA32; + again: memory = dma_alloc_pages(dev, gfp, get_order(size)); if (memory == NULL) @@ -245,7 +251,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, } if (!(gfp & GFP_DMA)) { - gfp |= GFP_DMA; + gfp = (gfp & ~GFP_DMA32) | GFP_DMA; goto again; } return NULL; diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index b5a89c0bdf59..5afd63e8cef7 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -86,12 +86,22 @@ EXPORT_SYMBOL(enable_hlt); */ void default_idle(void) { + local_irq_enable(); + if (!atomic_read(&hlt_counter)) { - local_irq_disable(); - if (!need_resched()) - safe_halt(); - else - local_irq_enable(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + while (!need_resched()) { + local_irq_disable(); + if (!need_resched()) + safe_halt(); + else + local_irq_enable(); + } + set_thread_flag(TIF_POLLING_NRFLAG); + } else { + while (!need_resched()) + cpu_relax(); } } @@ -102,30 +112,16 @@ void default_idle(void) */ static void poll_idle (void) { - int oldval; - local_irq_enable(); - /* - * Deal with another CPU just having chosen a thread to - * run here: - */ - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - asm volatile( - "2:" - "testl %0,%1;" - "rep; nop;" - "je 2b;" - : : - "i" (_TIF_NEED_RESCHED), - "m" (current_thread_info()->flags)); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); - } + asm volatile( + "2:" + "testl %0,%1;" + "rep; nop;" + "je 2b;" + : : + "i" (_TIF_NEED_RESCHED), + "m" (current_thread_info()->flags)); } void cpu_idle_wait(void) @@ -148,7 +144,8 @@ void cpu_idle_wait(void) do { ssleep(1); for_each_online_cpu(cpu) { - if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu)) + if (cpu_isset(cpu, map) && + !per_cpu(cpu_idle_state, cpu)) cpu_clear(cpu, map); } cpus_and(map, map, cpu_online_map); @@ -187,6 +184,8 @@ static inline void play_dead(void) */ void cpu_idle (void) { + set_thread_flag(TIF_POLLING_NRFLAG); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) { @@ -204,7 +203,9 @@ void cpu_idle (void) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -219,15 +220,12 @@ static void mwait_idle(void) { local_irq_enable(); - if (!need_resched()) { - set_thread_flag(TIF_POLLING_NRFLAG); - do { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - if (need_resched()) - break; - __mwait(0, 0); - } while (!need_resched()); - clear_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (need_resched()) + break; + __mwait(0, 0); } } @@ -278,7 +276,8 @@ void __show_regs(struct pt_regs * regs) system_utsname.version); printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip); printk_address(regs->rip); - printk("\nRSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->rsp, regs->eflags); + printk("\nRSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->rsp, + regs->eflags); printk("RAX: %016lx RBX: %016lx RCX: %016lx\n", regs->rax, regs->rbx, regs->rcx); printk("RDX: %016lx RSI: %016lx RDI: %016lx\n", @@ -430,15 +429,14 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, struct pt_regs * childregs; struct task_struct *me = current; - childregs = ((struct pt_regs *) (THREAD_SIZE + (unsigned long) p->thread_info)) - 1; - + childregs = ((struct pt_regs *) + (THREAD_SIZE + (unsigned long) p->thread_info)) - 1; *childregs = *regs; childregs->rax = 0; childregs->rsp = rsp; - if (rsp == ~0UL) { + if (rsp == ~0UL) childregs->rsp = (unsigned long)childregs; - } p->thread.rsp = (unsigned long) childregs; p->thread.rsp0 = (unsigned long) (childregs+1); @@ -460,7 +458,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, p->thread.io_bitmap_max = 0; return -ENOMEM; } - memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, IO_BITMAP_BYTES); + memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, + IO_BITMAP_BYTES); } /* @@ -497,7 +496,8 @@ out: * - fold all the options into a flag word and test it with a single test. * - could test fs/gs bitsliced */ -struct task_struct *__switch_to(struct task_struct *prev_p, struct task_struct *next_p) +struct task_struct * +__switch_to(struct task_struct *prev_p, struct task_struct *next_p) { struct thread_struct *prev = &prev_p->thread, *next = &next_p->thread; @@ -568,7 +568,8 @@ struct task_struct *__switch_to(struct task_struct *prev_p, struct task_struct * prev->userrsp = read_pda(oldrsp); write_pda(oldrsp, next->userrsp); write_pda(pcurrent, next_p); - write_pda(kernelstack, (unsigned long)next_p->thread_info + THREAD_SIZE - PDA_STACKOFFSET); + write_pda(kernelstack, + (unsigned long)next_p->thread_info + THREAD_SIZE - PDA_STACKOFFSET); /* * Now maybe reload the debug registers @@ -649,7 +650,9 @@ asmlinkage long sys_fork(struct pt_regs *regs) return do_fork(SIGCHLD, regs->rsp, regs, 0, NULL, NULL); } -asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp, void __user *parent_tid, void __user *child_tid, struct pt_regs *regs) +asmlinkage long +sys_clone(unsigned long clone_flags, unsigned long newsp, + void __user *parent_tid, void __user *child_tid, struct pt_regs *regs) { if (!newsp) newsp = regs->rsp; @@ -685,7 +688,8 @@ unsigned long get_wchan(struct task_struct *p) return 0; fp = *(u64 *)(p->thread.rsp); do { - if (fp < (unsigned long)stack || fp > (unsigned long)stack+THREAD_SIZE) + if (fp < (unsigned long)stack || + fp > (unsigned long)stack+THREAD_SIZE) return 0; rip = *(u64 *)(fp+8); if (!in_sched_functions(rip)) @@ -720,8 +724,8 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) task->thread.gsindex = 0; task->thread.gs = addr; if (doit) { - load_gs_index(0); - ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); + load_gs_index(0); + ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); } } put_cpu(); @@ -738,7 +742,7 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) set_32bit_tls(task, FS_TLS, addr); if (doit) { load_TLS(&task->thread, cpu); - asm volatile("movl %0,%%fs" :: "r" (FS_TLS_SEL)); + asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL)); } task->thread.fsindex = FS_TLS_SEL; task->thread.fs = 0; @@ -748,8 +752,8 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) if (doit) { /* set the selector to 0 to not confuse __switch_to */ - asm volatile("movl %0,%%fs" :: "r" (0)); - ret = checking_wrmsrl(MSR_FS_BASE, addr); + asm volatile("movl %0,%%fs" :: "r" (0)); + ret = checking_wrmsrl(MSR_FS_BASE, addr); } } put_cpu(); @@ -758,9 +762,9 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) unsigned long base; if (task->thread.fsindex == FS_TLS_SEL) base = read_32bit_tls(task, FS_TLS); - else if (doit) { + else if (doit) rdmsrl(MSR_FS_BASE, base); - } else + else base = task->thread.fs; ret = put_user(base, (unsigned long __user *)addr); break; @@ -769,9 +773,9 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) unsigned long base; if (task->thread.gsindex == GS_TLS_SEL) base = read_32bit_tls(task, GS_TLS); - else if (doit) { + else if (doit) rdmsrl(MSR_KERNEL_GS_BASE, base); - } else + else base = task->thread.gs; ret = put_user(base, (unsigned long __user *)addr); break; diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index bbf64b59a21e..a87b6cebe80f 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -313,48 +313,11 @@ static unsigned long getreg(struct task_struct *child, unsigned long regno) } -asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; long i, ret; unsigned ui; - /* This lock_kernel fixes a subtle race with suid exec */ - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -608,10 +571,6 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/x86_64/kernel/reboot.c b/arch/x86_64/kernel/reboot.c index 47f95687905f..75235ed2b31b 100644 --- a/arch/x86_64/kernel/reboot.c +++ b/arch/x86_64/kernel/reboot.c @@ -77,6 +77,7 @@ static inline void kb_wait(void) void machine_shutdown(void) { + unsigned long flags; /* Stop the cpus and apics */ #ifdef CONFIG_SMP int reboot_cpu_id; @@ -98,7 +99,7 @@ void machine_shutdown(void) smp_send_stop(); #endif - local_irq_disable(); + local_irq_save(flags); #ifndef CONFIG_SMP disable_local_APIC(); @@ -106,7 +107,7 @@ void machine_shutdown(void) disable_IO_APIC(); - local_irq_enable(); + local_irq_restore(flags); } void machine_emergency_restart(void) @@ -120,7 +121,7 @@ void machine_emergency_restart(void) /* Could also try the reset bit in the Hammer NB */ switch (reboot_type) { case BOOT_KBD: - for (i=0; i<100; i++) { + for (i=0; i<10; i++) { kb_wait(); udelay(50); outb(0xfe,0x64); /* pulse reset low */ diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index da0bc3e7bdf5..750e01dcbdf4 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -60,6 +60,7 @@ #include <asm/setup.h> #include <asm/mach_apic.h> #include <asm/numa.h> +#include <asm/sections.h> /* * Machine setup.. @@ -103,7 +104,6 @@ struct edid_info edid_info; struct e820map e820; extern int root_mountflags; -extern char _text, _etext, _edata, _end; char command_line[COMMAND_LINE_SIZE]; @@ -412,7 +412,6 @@ contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) { unsigned long bootmap_size, bootmap; - memory_present(0, start_pfn, end_pfn); bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT; bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size); if (bootmap == -1L) @@ -571,6 +570,8 @@ void __init setup_arch(char **cmdline_p) init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); + zap_low_mappings(0); + #ifdef CONFIG_ACPI /* * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). @@ -657,8 +658,6 @@ void __init setup_arch(char **cmdline_p) } #endif - sparse_init(); - paging_init(); check_ioapic(); @@ -793,7 +792,7 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #endif bits = 0; - while ((1 << bits) < c->x86_num_cores) + while ((1 << bits) < c->x86_max_cores) bits++; /* Low order bits define the core id (index of core in socket) */ @@ -823,10 +822,10 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) if (!node_online(node)) node = nearby_node(apicid); } - cpu_to_node[cpu] = node; + numa_set_node(cpu, node); printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", - cpu, c->x86_num_cores, node, cpu_core_id[cpu]); + cpu, c->x86_max_cores, node, cpu_core_id[cpu]); #endif #endif } @@ -875,9 +874,9 @@ static int __init init_amd(struct cpuinfo_x86 *c) display_cacheinfo(c); if (c->extended_cpuid_level >= 0x80000008) { - c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; - if (c->x86_num_cores & (c->x86_num_cores - 1)) - c->x86_num_cores = 1; + c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; + if (c->x86_max_cores & (c->x86_max_cores - 1)) + c->x86_max_cores = 1; amd_detect_cmp(c); } @@ -889,54 +888,44 @@ static void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP u32 eax, ebx, ecx, edx; - int index_msb, tmp; + int index_msb, core_bits; int cpu = smp_processor_id(); - + + cpuid(1, &eax, &ebx, &ecx, &edx); + + c->apicid = phys_pkg_id(0); + if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; - cpuid(1, &eax, &ebx, &ecx, &edx); smp_num_siblings = (ebx & 0xff0000) >> 16; - + if (smp_num_siblings == 1) { printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { - index_msb = 31; - /* - * At this point we only support two siblings per - * processor package. - */ + } else if (smp_num_siblings > 1 ) { + if (smp_num_siblings > NR_CPUS) { printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings); smp_num_siblings = 1; return; } - tmp = smp_num_siblings; - while ((tmp & 0x80000000 ) == 0) { - tmp <<=1 ; - index_msb--; - } - if (smp_num_siblings & (smp_num_siblings - 1)) - index_msb++; + + index_msb = get_count_order(smp_num_siblings); phys_proc_id[cpu] = phys_pkg_id(index_msb); - + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", phys_proc_id[cpu]); - smp_num_siblings = smp_num_siblings / c->x86_num_cores; + smp_num_siblings = smp_num_siblings / c->x86_max_cores; - tmp = smp_num_siblings; - index_msb = 31; - while ((tmp & 0x80000000) == 0) { - tmp <<=1 ; - index_msb--; - } - if (smp_num_siblings & (smp_num_siblings - 1)) - index_msb++; + index_msb = get_count_order(smp_num_siblings) ; - cpu_core_id[cpu] = phys_pkg_id(index_msb); + core_bits = get_count_order(c->x86_max_cores); - if (c->x86_num_cores > 1) + cpu_core_id[cpu] = phys_pkg_id(index_msb) & + ((1 << core_bits) - 1); + + if (c->x86_max_cores > 1) printk(KERN_INFO "CPU: Processor Core ID: %d\n", cpu_core_id[cpu]); } @@ -975,7 +964,7 @@ static void srat_detect_node(void) node = apicid_to_node[hard_smp_processor_id()]; if (node == NUMA_NO_NODE) node = 0; - cpu_to_node[cpu] = node; + numa_set_node(cpu, node); if (acpi_numa > 0) printk(KERN_INFO "CPU %d -> Node %d\n", cpu, node); @@ -993,13 +982,18 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) unsigned eax = cpuid_eax(0x80000008); c->x86_virt_bits = (eax >> 8) & 0xff; c->x86_phys_bits = eax & 0xff; + /* CPUID workaround for Intel 0F34 CPU */ + if (c->x86_vendor == X86_VENDOR_INTEL && + c->x86 == 0xF && c->x86_model == 0x3 && + c->x86_mask == 0x4) + c->x86_phys_bits = 36; } if (c->x86 == 15) c->x86_cache_alignment = c->x86_clflush_size * 2; if (c->x86 >= 15) set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); - c->x86_num_cores = intel_num_cpu_cores(c); + c->x86_max_cores = intel_num_cpu_cores(c); srat_detect_node(); } @@ -1037,7 +1031,7 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) c->x86_model_id[0] = '\0'; /* Unset */ c->x86_clflush_size = 64; c->x86_cache_alignment = c->x86_clflush_size; - c->x86_num_cores = 1; + c->x86_max_cores = 1; c->extended_cpuid_level = 0; memset(&c->x86_capability, 0, sizeof c->x86_capability); @@ -1060,10 +1054,10 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) c->x86 = (tfms >> 8) & 0xf; c->x86_model = (tfms >> 4) & 0xf; c->x86_mask = tfms & 0xf; - if (c->x86 == 0xf) { + if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xF) << 4; - } if (c->x86_capability[0] & (1<<19)) c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; } else { @@ -1271,13 +1265,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); #ifdef CONFIG_SMP - if (smp_num_siblings * c->x86_num_cores > 1) { + if (smp_num_siblings * c->x86_max_cores > 1) { int cpu = c - cpu_data; seq_printf(m, "physical id\t: %d\n", phys_proc_id[cpu]); - seq_printf(m, "siblings\t: %d\n", - c->x86_num_cores * smp_num_siblings); + seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[cpu])); seq_printf(m, "core id\t\t: %d\n", cpu_core_id[cpu]); - seq_printf(m, "cpu cores\t: %d\n", c->x86_num_cores); + seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); } #endif diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 79190891fbc5..06dc354375c3 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -141,7 +141,6 @@ void pda_init(int cpu) panic("cannot allocate irqstack for cpu %d", cpu); } - asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt))); pda->irqstackptr += IRQSTACKSIZE-64; } @@ -197,6 +196,7 @@ void __cpuinit cpu_init (void) /* CPU 0 is initialised in head64.c */ if (cpu != 0) { pda_init(cpu); + zap_low_mappings(cpu); } else estacks = boot_exception_stacks; diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index d642fbf3da29..5876df116c92 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -110,6 +110,15 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned COPY(r14); COPY(r15); + /* Kernel saves and restores only the CS segment register on signals, + * which is the bare minimum needed to allow mixed 32/64-bit code. + * App's signal handler can save/restore other segments if needed. */ + { + unsigned cs; + err |= __get_user(cs, &sc->cs); + regs->cs = cs | 3; /* Force into user mode */ + } + { unsigned int tmpflags; err |= __get_user(tmpflags, &sc->eflags); @@ -187,6 +196,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned lo { int err = 0; + err |= __put_user(regs->cs, &sc->cs); err |= __put_user(0, &sc->gs); err |= __put_user(0, &sc->fs); @@ -318,7 +328,14 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->rsp = (unsigned long)frame; + /* Set up the CS register to run signal handlers in 64-bit mode, + even if the handler happens to be interrupting 32-bit code. */ + regs->cs = __USER_CS; + + /* This, by contrast, has nothing to do with segment registers - + see include/asm-x86_64/uaccess.h for details. */ set_fs(USER_DS); + regs->eflags &= ~TF_MASK; if (test_thread_flag(TIF_SINGLESTEP)) ptrace_notify(SIGTRAP); diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 9db9dda161b4..cfc3d9dccbd9 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -28,8 +28,6 @@ #include <asm/proto.h> #include <asm/apicdef.h> -#define __cpuinit __init - /* * Smarter SMP flushing macros. * c/o Linus Torvalds. @@ -452,13 +450,14 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, void smp_stop_cpu(void) { + unsigned long flags; /* * Remove this CPU: */ cpu_clear(smp_processor_id(), cpu_online_map); - local_irq_disable(); + local_irq_save(flags); disable_local_APIC(); - local_irq_enable(); + local_irq_restore(flags); } static void smp_really_stop_cpu(void *dummy) diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 658a81b33f3b..683c33f7b967 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -64,9 +64,8 @@ int smp_num_siblings = 1; /* Package ID of each logical CPU */ u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; +/* core ID of each logical CPU */ u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; -EXPORT_SYMBOL(phys_proc_id); -EXPORT_SYMBOL(cpu_core_id); /* Bitmask of currently online CPUs */ cpumask_t cpu_online_map __read_mostly; @@ -89,7 +88,10 @@ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; /* Set when the idlers are all forked */ int smp_threads_ready; +/* representing HT siblings of each logical CPU */ cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; + +/* representing HT and core siblings of each logical CPU */ cpumask_t cpu_core_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_core_map); @@ -436,30 +438,59 @@ void __cpuinit smp_callin(void) cpu_set(cpuid, cpu_callin_map); } +/* representing cpus for which sibling maps can be computed */ +static cpumask_t cpu_sibling_setup_map; + static inline void set_cpu_sibling_map(int cpu) { int i; + struct cpuinfo_x86 *c = cpu_data; + + cpu_set(cpu, cpu_sibling_setup_map); if (smp_num_siblings > 1) { - for_each_cpu(i) { - if (cpu_core_id[cpu] == cpu_core_id[i]) { + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (phys_proc_id[cpu] == phys_proc_id[i] && + cpu_core_id[cpu] == cpu_core_id[i]) { cpu_set(i, cpu_sibling_map[cpu]); cpu_set(cpu, cpu_sibling_map[i]); + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); } } } else { cpu_set(cpu, cpu_sibling_map[cpu]); } - if (current_cpu_data.x86_num_cores > 1) { - for_each_cpu(i) { - if (phys_proc_id[cpu] == phys_proc_id[i]) { - cpu_set(i, cpu_core_map[cpu]); - cpu_set(cpu, cpu_core_map[i]); - } - } - } else { + if (current_cpu_data.x86_max_cores == 1) { cpu_core_map[cpu] = cpu_sibling_map[cpu]; + c[cpu].booted_cores = 1; + return; + } + + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (phys_proc_id[cpu] == phys_proc_id[i]) { + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + /* + * Does this new cpu bringup a new core? + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) { + /* + * for each core in package, increment + * the booted_cores for this new cpu + */ + if (first_cpu(cpu_sibling_map[i]) == i) + c[cpu].booted_cores++; + /* + * increment the core count for all + * the other cpus in this package + */ + if (i != cpu) + c[i].booted_cores++; + } else if (i != cpu && !c[cpu].booted_cores) + c[cpu].booted_cores = c[i].booted_cores; + } } } @@ -474,6 +505,7 @@ void __cpuinit start_secondary(void) * things done here to the most necessary things. */ cpu_init(); + preempt_disable(); smp_callin(); /* otherwise gcc will move up the smp_processor_id before the cpu_init */ @@ -880,6 +912,9 @@ static __init void disable_smp(void) } #ifdef CONFIG_HOTPLUG_CPU + +int additional_cpus __initdata = -1; + /* * cpu_possible_map should be static, it cannot change as cpu's * are onlined, or offlined. The reason is per-cpu data-structures @@ -888,14 +923,38 @@ static __init void disable_smp(void) * cpu_present_map on the other hand can change dynamically. * In case when cpu_hotplug is not compiled, then we resort to current * behaviour, which is cpu_possible == cpu_present. - * If cpu-hotplug is supported, then we need to preallocate for all - * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range. * - Ashok Raj + * + * Three ways to find out the number of additional hotplug CPUs: + * - If the BIOS specified disabled CPUs in ACPI/mptables use that. + * - otherwise use half of the available CPUs or 2, whatever is more. + * - The user can overwrite it with additional_cpus=NUM + * We do this because additional CPUs waste a lot of memory. + * -AK */ __init void prefill_possible_map(void) { int i; - for (i = 0; i < NR_CPUS; i++) + int possible; + + if (additional_cpus == -1) { + if (disabled_cpus > 0) { + additional_cpus = disabled_cpus; + } else { + additional_cpus = num_processors / 2; + if (additional_cpus == 0) + additional_cpus = 2; + } + } + possible = num_processors + additional_cpus; + if (possible > NR_CPUS) + possible = NR_CPUS; + + printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", + possible, + max_t(int, possible - num_processors, 0)); + + for (i = 0; i < possible; i++) cpu_set(i, cpu_possible_map); } #endif @@ -966,6 +1025,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) nmi_watchdog_default(); current_cpu_data = boot_cpu_data; current_thread_info()->cpu = 0; /* needed? */ + set_cpu_sibling_map(0); if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); @@ -1009,8 +1069,6 @@ void __init smp_prepare_boot_cpu(void) int me = smp_processor_id(); cpu_set(me, cpu_online_map); cpu_set(me, cpu_callout_map); - cpu_set(0, cpu_sibling_map[0]); - cpu_set(0, cpu_core_map[0]); per_cpu(cpu_state, me) = CPU_ONLINE; } @@ -1063,9 +1121,6 @@ int __cpuinit __cpu_up(unsigned int cpu) */ void __init smp_cpus_done(unsigned int max_cpus) { -#ifndef CONFIG_HOTPLUG_CPU - zap_low_mappings(); -#endif smp_cleanup_boot(); #ifdef CONFIG_X86_IO_APIC @@ -1082,15 +1137,24 @@ void __init smp_cpus_done(unsigned int max_cpus) static void remove_siblinginfo(int cpu) { int sibling; + struct cpuinfo_x86 *c = cpu_data; + for_each_cpu_mask(sibling, cpu_core_map[cpu]) { + cpu_clear(cpu, cpu_core_map[sibling]); + /* + * last thread sibling in this cpu core going down + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) + c[sibling].booted_cores--; + } + for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) cpu_clear(cpu, cpu_sibling_map[sibling]); - for_each_cpu_mask(sibling, cpu_core_map[cpu]) - cpu_clear(cpu, cpu_core_map[sibling]); cpus_clear(cpu_sibling_map[cpu]); cpus_clear(cpu_core_map[cpu]); phys_proc_id[cpu] = BAD_APICID; cpu_core_id[cpu] = BAD_APICID; + cpu_clear(cpu, cpu_sibling_setup_map); } void remove_cpu_from_maps(void) @@ -1154,6 +1218,12 @@ void __cpu_die(unsigned int cpu) printk(KERN_ERR "CPU %u didn't die...\n", cpu); } +static __init int setup_additional_cpus(char *s) +{ + return get_option(&s, &additional_cpus); +} +__setup("additional_cpus=", setup_additional_cpus); + #else /* ... !CONFIG_HOTPLUG_CPU */ int __cpu_disable(void) diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86_64/kernel/sys_x86_64.c index cc7821c68851..6449ea8fe756 100644 --- a/arch/x86_64/kernel/sys_x86_64.c +++ b/arch/x86_64/kernel/sys_x86_64.c @@ -154,17 +154,3 @@ asmlinkage long sys_uname(struct new_utsname __user * name) err |= copy_to_user(&name->machine, "i686", 5); return err ? -EFAULT : 0; } - -asmlinkage long sys_time64(long __user * tloc) -{ - struct timeval now; - int i; - - do_gettimeofday(&now); - i = now.tv_sec; - if (tloc) { - if (put_user(i,tloc)) - i = -EFAULT; - } - return i; -} diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index b5e09e6b5536..bf337f493189 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -428,19 +428,6 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, { conditional_sti(regs); -#ifdef CONFIG_CHECKING - { - unsigned long gs; - struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); - rdmsrl(MSR_GS_BASE, gs); - if (gs != (unsigned long)pda) { - wrmsrl(MSR_GS_BASE, pda); - printk("%s: wrong gs %lx expected %p rip %lx\n", str, gs, pda, - regs->rip); - } - } -#endif - if (user_mode(regs)) { struct task_struct *tsk = current; @@ -513,20 +500,6 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, { conditional_sti(regs); -#ifdef CONFIG_CHECKING - { - unsigned long gs; - struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); - rdmsrl(MSR_GS_BASE, gs); - if (gs != (unsigned long)pda) { - wrmsrl(MSR_GS_BASE, pda); - oops_in_progress++; - printk("general protection handler: wrong gs %lx expected %p\n", gs, pda); - oops_in_progress--; - } - } -#endif - if (user_mode(regs)) { struct task_struct *tsk = current; @@ -665,19 +638,6 @@ asmlinkage void __kprobes do_debug(struct pt_regs * regs, struct task_struct *tsk = current; siginfo_t info; -#ifdef CONFIG_CHECKING - { - /* RED-PEN interaction with debugger - could destroy gs */ - unsigned long gs; - struct x8664_pda *pda = cpu_pda + safe_smp_processor_id(); - rdmsrl(MSR_GS_BASE, gs); - if (gs != (unsigned long)pda) { - wrmsrl(MSR_GS_BASE, pda); - printk("debug handler: wrong gs %lx expected %p\n", gs, pda); - } - } -#endif - get_debugreg(condition, 6); if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, @@ -888,6 +848,10 @@ asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void) { } +asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void) +{ +} + /* * 'math_state_restore()' saves the current math information in the * old math state array, and gets the new ones from the current task diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 6dd642cad2ef..58b19215b4b3 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -50,7 +50,7 @@ SECTIONS *(.bss.page_aligned) *(.bss) } - __bss_end = .; + __bss_stop = .; . = ALIGN(PAGE_SIZE); . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index fd99ddd009bc..4a54221e10bc 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -203,3 +203,6 @@ EXPORT_SYMBOL(flush_tlb_page); #endif EXPORT_SYMBOL(cpu_khz); + +EXPORT_SYMBOL(load_gs_index); + diff --git a/arch/x86_64/lib/clear_page.S b/arch/x86_64/lib/clear_page.S index 30a9da458c15..43d9fa136180 100644 --- a/arch/x86_64/lib/clear_page.S +++ b/arch/x86_64/lib/clear_page.S @@ -5,46 +5,8 @@ .globl clear_page .p2align 4 clear_page: - xorl %eax,%eax - movl $4096/64,%ecx - .p2align 4 -.Lloop: - decl %ecx -#define PUT(x) movq %rax,x*8(%rdi) - movq %rax,(%rdi) - PUT(1) - PUT(2) - PUT(3) - PUT(4) - PUT(5) - PUT(6) - PUT(7) - leaq 64(%rdi),%rdi - jnz .Lloop - nop - ret -clear_page_end: - - /* C stepping K8 run faster using the string instructions. - It is also a lot simpler. Use this when possible */ - -#include <asm/cpufeature.h> - - .section .altinstructions,"a" - .align 8 - .quad clear_page - .quad clear_page_c - .byte X86_FEATURE_K8_C - .byte clear_page_end-clear_page - .byte clear_page_c_end-clear_page_c - .previous - - .section .altinstr_replacement,"ax" -clear_page_c: movl $4096/8,%ecx xorl %eax,%eax rep stosq ret -clear_page_c_end: - .previous diff --git a/arch/x86_64/lib/copy_page.S b/arch/x86_64/lib/copy_page.S index dd3aa47b6bf5..621a19769406 100644 --- a/arch/x86_64/lib/copy_page.S +++ b/arch/x86_64/lib/copy_page.S @@ -8,94 +8,7 @@ .globl copy_page .p2align 4 copy_page: - subq $3*8,%rsp - movq %rbx,(%rsp) - movq %r12,1*8(%rsp) - movq %r13,2*8(%rsp) - - movl $(4096/64)-5,%ecx - .p2align 4 -.Loop64: - dec %rcx - - movq (%rsi), %rax - movq 8 (%rsi), %rbx - movq 16 (%rsi), %rdx - movq 24 (%rsi), %r8 - movq 32 (%rsi), %r9 - movq 40 (%rsi), %r10 - movq 48 (%rsi), %r11 - movq 56 (%rsi), %r12 - - prefetcht0 5*64(%rsi) - - movq %rax, (%rdi) - movq %rbx, 8 (%rdi) - movq %rdx, 16 (%rdi) - movq %r8, 24 (%rdi) - movq %r9, 32 (%rdi) - movq %r10, 40 (%rdi) - movq %r11, 48 (%rdi) - movq %r12, 56 (%rdi) - - leaq 64 (%rsi), %rsi - leaq 64 (%rdi), %rdi - - jnz .Loop64 - - movl $5,%ecx - .p2align 4 -.Loop2: - decl %ecx - - movq (%rsi), %rax - movq 8 (%rsi), %rbx - movq 16 (%rsi), %rdx - movq 24 (%rsi), %r8 - movq 32 (%rsi), %r9 - movq 40 (%rsi), %r10 - movq 48 (%rsi), %r11 - movq 56 (%rsi), %r12 - - movq %rax, (%rdi) - movq %rbx, 8 (%rdi) - movq %rdx, 16 (%rdi) - movq %r8, 24 (%rdi) - movq %r9, 32 (%rdi) - movq %r10, 40 (%rdi) - movq %r11, 48 (%rdi) - movq %r12, 56 (%rdi) - - leaq 64(%rdi),%rdi - leaq 64(%rsi),%rsi - - jnz .Loop2 - - movq (%rsp),%rbx - movq 1*8(%rsp),%r12 - movq 2*8(%rsp),%r13 - addq $3*8,%rsp - ret - - /* C stepping K8 run faster using the string copy instructions. - It is also a lot simpler. Use this when possible */ - -#include <asm/cpufeature.h> - - .section .altinstructions,"a" - .align 8 - .quad copy_page - .quad copy_page_c - .byte X86_FEATURE_K8_C - .byte copy_page_c_end-copy_page_c - .byte copy_page_c_end-copy_page_c - .previous - - .section .altinstr_replacement,"ax" -copy_page_c: movl $4096/8,%ecx rep movsq ret -copy_page_c_end: - .previous diff --git a/arch/x86_64/lib/memcpy.S b/arch/x86_64/lib/memcpy.S index c6c46494fef5..92dd80544602 100644 --- a/arch/x86_64/lib/memcpy.S +++ b/arch/x86_64/lib/memcpy.S @@ -11,6 +11,8 @@ * * Output: * rax original destination + * + * TODO: check best memcpy for PSC */ .globl __memcpy @@ -18,95 +20,6 @@ .p2align 4 __memcpy: memcpy: - pushq %rbx - movq %rdi,%rax - - movl %edx,%ecx - shrl $6,%ecx - jz .Lhandle_tail - - .p2align 4 -.Lloop_64: - decl %ecx - - movq (%rsi),%r11 - movq 8(%rsi),%r8 - - movq %r11,(%rdi) - movq %r8,1*8(%rdi) - - movq 2*8(%rsi),%r9 - movq 3*8(%rsi),%r10 - - movq %r9,2*8(%rdi) - movq %r10,3*8(%rdi) - - movq 4*8(%rsi),%r11 - movq 5*8(%rsi),%r8 - - movq %r11,4*8(%rdi) - movq %r8,5*8(%rdi) - - movq 6*8(%rsi),%r9 - movq 7*8(%rsi),%r10 - - movq %r9,6*8(%rdi) - movq %r10,7*8(%rdi) - - leaq 64(%rsi),%rsi - leaq 64(%rdi),%rdi - jnz .Lloop_64 - -.Lhandle_tail: - movl %edx,%ecx - andl $63,%ecx - shrl $3,%ecx - jz .Lhandle_7 - .p2align 4 -.Lloop_8: - decl %ecx - movq (%rsi),%r8 - movq %r8,(%rdi) - leaq 8(%rdi),%rdi - leaq 8(%rsi),%rsi - jnz .Lloop_8 - -.Lhandle_7: - movl %edx,%ecx - andl $7,%ecx - jz .Lende - .p2align 4 -.Lloop_1: - movb (%rsi),%r8b - movb %r8b,(%rdi) - incq %rdi - incq %rsi - decl %ecx - jnz .Lloop_1 - -.Lende: - popq %rbx - ret -.Lfinal: - - /* C stepping K8 run faster using the string copy instructions. - It is also a lot simpler. Use this when possible */ - - .section .altinstructions,"a" - .align 8 - .quad memcpy - .quad memcpy_c - .byte X86_FEATURE_K8_C - .byte .Lfinal-memcpy - .byte memcpy_c_end-memcpy_c - .previous - - .section .altinstr_replacement,"ax" - /* rdi destination - * rsi source - * rdx count - */ -memcpy_c: movq %rdi,%rax movl %edx,%ecx shrl $3,%ecx @@ -117,5 +30,3 @@ memcpy_c: rep movsb ret -memcpy_c_end: - .previous diff --git a/arch/x86_64/lib/memset.S b/arch/x86_64/lib/memset.S index 4b4c40638640..2aa48f24ed1e 100644 --- a/arch/x86_64/lib/memset.S +++ b/arch/x86_64/lib/memset.S @@ -13,98 +13,6 @@ .p2align 4 memset: __memset: - movq %rdi,%r10 - movq %rdx,%r11 - - /* expand byte value */ - movzbl %sil,%ecx - movabs $0x0101010101010101,%rax - mul %rcx /* with rax, clobbers rdx */ - - /* align dst */ - movl %edi,%r9d - andl $7,%r9d - jnz .Lbad_alignment -.Lafter_bad_alignment: - - movl %r11d,%ecx - shrl $6,%ecx - jz .Lhandle_tail - - .p2align 4 -.Lloop_64: - decl %ecx - movq %rax,(%rdi) - movq %rax,8(%rdi) - movq %rax,16(%rdi) - movq %rax,24(%rdi) - movq %rax,32(%rdi) - movq %rax,40(%rdi) - movq %rax,48(%rdi) - movq %rax,56(%rdi) - leaq 64(%rdi),%rdi - jnz .Lloop_64 - - /* Handle tail in loops. The loops should be faster than hard - to predict jump tables. */ - .p2align 4 -.Lhandle_tail: - movl %r11d,%ecx - andl $63&(~7),%ecx - jz .Lhandle_7 - shrl $3,%ecx - .p2align 4 -.Lloop_8: - decl %ecx - movq %rax,(%rdi) - leaq 8(%rdi),%rdi - jnz .Lloop_8 - -.Lhandle_7: - movl %r11d,%ecx - andl $7,%ecx - jz .Lende - .p2align 4 -.Lloop_1: - decl %ecx - movb %al,(%rdi) - leaq 1(%rdi),%rdi - jnz .Lloop_1 - -.Lende: - movq %r10,%rax - ret - -.Lbad_alignment: - cmpq $7,%r11 - jbe .Lhandle_7 - movq %rax,(%rdi) /* unaligned store */ - movq $8,%r8 - subq %r9,%r8 - addq %r8,%rdi - subq %r8,%r11 - jmp .Lafter_bad_alignment - - /* C stepping K8 run faster using the string instructions. - It is also a lot simpler. Use this when possible */ - -#include <asm/cpufeature.h> - - .section .altinstructions,"a" - .align 8 - .quad memset - .quad memset_c - .byte X86_FEATURE_K8_C - .byte memset_c_end-memset_c - .byte memset_c_end-memset_c - .previous - - .section .altinstr_replacement,"ax" - /* rdi destination - * rsi value - * rdx count - */ -memset_c: movq %rdi,%r9 movl %edx,%r8d andl $7,%r8d @@ -121,5 +29,3 @@ memset_c: stosb movq %r9,%rax ret -memset_c_end: - .previous diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index b75b872ec154..3a63707a698b 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -308,18 +308,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long flags; siginfo_t info; -#ifdef CONFIG_CHECKING - { - unsigned long gs; - struct x8664_pda *pda = cpu_pda + stack_smp_processor_id(); - rdmsrl(MSR_GS_BASE, gs); - if (gs != (unsigned long)pda) { - wrmsrl(MSR_GS_BASE, pda); - printk("page_fault: wrong gs %lx expected %p\n", gs, pda); - } - } -#endif - /* get the address */ __asm__("movq %%cr2,%0":"=r" (address)); if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, @@ -571,3 +559,10 @@ do_sigbus: force_sig_info(SIGBUS, &info, tsk); return; } + +static int __init enable_pagefaulttrace(char *str) +{ + page_fault_trace = 1; + return 0; +} +__setup("pagefaulttrace", enable_pagefaulttrace); diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index e60a1a848de8..286f6a624c3a 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -22,6 +22,7 @@ #include <linux/pagemap.h> #include <linux/bootmem.h> #include <linux/proc_fs.h> +#include <linux/pci.h> #include <asm/processor.h> #include <asm/system.h> @@ -36,16 +37,13 @@ #include <asm/mmu_context.h> #include <asm/proto.h> #include <asm/smp.h> +#include <asm/sections.h> #ifndef Dprintk #define Dprintk(x...) #endif -#ifdef CONFIG_GART_IOMMU -extern int swiotlb; -#endif - -extern char _stext[]; +static unsigned long dma_reserve __initdata; DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -86,9 +84,6 @@ void show_mem(void) /* References to section boundaries */ -extern char _text, _etext, _edata, __bss_start, _end[]; -extern char __init_begin, __init_end; - int after_bootmem; static void *spp_getpage(void) @@ -308,42 +303,81 @@ void __init init_memory_mapping(unsigned long start, unsigned long end) table_end<<PAGE_SHIFT); } -extern struct x8664_pda cpu_pda[NR_CPUS]; +void __cpuinit zap_low_mappings(int cpu) +{ + if (cpu == 0) { + pgd_t *pgd = pgd_offset_k(0UL); + pgd_clear(pgd); + } else { + /* + * For AP's, zap the low identity mappings by changing the cr3 + * to init_level4_pgt and doing local flush tlb all + */ + asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt))); + } + __flush_tlb_all(); +} -/* Assumes all CPUs still execute in init_mm */ -void zap_low_mappings(void) +/* Compute zone sizes for the DMA and DMA32 zones in a node. */ +__init void +size_zones(unsigned long *z, unsigned long *h, + unsigned long start_pfn, unsigned long end_pfn) { - pgd_t *pgd = pgd_offset_k(0UL); - pgd_clear(pgd); - flush_tlb_all(); + int i; + unsigned long w; + + for (i = 0; i < MAX_NR_ZONES; i++) + z[i] = 0; + + if (start_pfn < MAX_DMA_PFN) + z[ZONE_DMA] = MAX_DMA_PFN - start_pfn; + if (start_pfn < MAX_DMA32_PFN) { + unsigned long dma32_pfn = MAX_DMA32_PFN; + if (dma32_pfn > end_pfn) + dma32_pfn = end_pfn; + z[ZONE_DMA32] = dma32_pfn - start_pfn; + } + z[ZONE_NORMAL] = end_pfn - start_pfn; + + /* Remove lower zones from higher ones. */ + w = 0; + for (i = 0; i < MAX_NR_ZONES; i++) { + if (z[i]) + z[i] -= w; + w += z[i]; + } + + /* Compute holes */ + w = 0; + for (i = 0; i < MAX_NR_ZONES; i++) { + unsigned long s = w; + w += z[i]; + h[i] = e820_hole_size(s, w); + } + + /* Add the space pace needed for mem_map to the holes too. */ + for (i = 0; i < MAX_NR_ZONES; i++) + h[i] += (z[i] * sizeof(struct page)) / PAGE_SIZE; + + /* The 16MB DMA zone has the kernel and other misc mappings. + Account them too */ + if (h[ZONE_DMA]) { + h[ZONE_DMA] += dma_reserve; + if (h[ZONE_DMA] >= z[ZONE_DMA]) { + printk(KERN_WARNING + "Kernel too large and filling up ZONE_DMA?\n"); + h[ZONE_DMA] = z[ZONE_DMA]; + } + } } #ifndef CONFIG_NUMA void __init paging_init(void) { - { - unsigned long zones_size[MAX_NR_ZONES]; - unsigned long holes[MAX_NR_ZONES]; - unsigned int max_dma; - - memset(zones_size, 0, sizeof(zones_size)); - memset(holes, 0, sizeof(holes)); - - max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; - - if (end_pfn < max_dma) { - zones_size[ZONE_DMA] = end_pfn; - holes[ZONE_DMA] = e820_hole_size(0, end_pfn); - } else { - zones_size[ZONE_DMA] = max_dma; - holes[ZONE_DMA] = e820_hole_size(0, max_dma); - zones_size[ZONE_NORMAL] = end_pfn - max_dma; - holes[ZONE_NORMAL] = e820_hole_size(max_dma, end_pfn); - } - free_area_init_node(0, NODE_DATA(0), zones_size, - __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes); - } - return; + unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES]; + size_zones(zones, holes, 0, end_pfn); + free_area_init_node(0, NODE_DATA(0), zones, + __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes); } #endif @@ -438,19 +472,16 @@ void __init mem_init(void) datasize >> 10, initsize >> 10); +#ifdef CONFIG_SMP /* - * Subtle. SMP is doing its boot stuff late (because it has to - * fork idle threads) - but it also needs low mappings for the - * protected-mode entry to work. We zap these entries only after - * the WP-bit has been tested. + * Sync boot_level4_pgt mappings with the init_level4_pgt + * except for the low identity mappings which are already zapped + * in init_level4_pgt. This sync-up is essential for AP's bringup */ -#ifndef CONFIG_SMP - zap_low_mappings(); + memcpy(boot_level4_pgt+1, init_level4_pgt+1, (PTRS_PER_PGD-1)*sizeof(pgd_t)); #endif } -extern char __initdata_begin[], __initdata_end[]; - void free_initmem(void) { unsigned long addr; @@ -464,7 +495,7 @@ void free_initmem(void) totalram_pages++; } memset(__initdata_begin, 0xba, __initdata_end - __initdata_begin); - printk ("Freeing unused kernel memory: %luk freed\n", (&__init_end - &__init_begin) >> 10); + printk ("Freeing unused kernel memory: %luk freed\n", (__init_end - __init_begin) >> 10); } #ifdef CONFIG_BLK_DEV_INITRD @@ -491,6 +522,8 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) #else reserve_bootmem(phys, len); #endif + if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) + dma_reserve += len / PAGE_SIZE; } int kern_addr_valid(unsigned long addr) @@ -532,10 +565,6 @@ extern int exception_trace, page_fault_trace; static ctl_table debug_table2[] = { { 99, "exception-trace", &exception_trace, sizeof(int), 0644, NULL, proc_dointvec }, -#ifdef CONFIG_CHECKING - { 100, "page-fault-trace", &page_fault_trace, sizeof(int), 0644, NULL, - proc_dointvec }, -#endif { 0, } }; diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c index 65417b040c1b..a5663e0bb01c 100644 --- a/arch/x86_64/mm/k8topology.c +++ b/arch/x86_64/mm/k8topology.c @@ -108,6 +108,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) limit >>= 16; limit <<= 24; limit |= (1<<24)-1; + limit++; if (limit > end_pfn << PAGE_SHIFT) limit = end_pfn << PAGE_SHIFT; diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 214803821001..a828a01739cc 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -38,38 +38,57 @@ cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly; int numa_off __initdata; -int __init compute_hash_shift(struct node *nodes, int numnodes) + +/* + * Given a shift value, try to populate memnodemap[] + * Returns : + * 1 if OK + * 0 if memnodmap[] too small (of shift too small) + * -1 if node overlap or lost ram (shift too big) + */ +static int __init populate_memnodemap( + const struct node *nodes, int numnodes, int shift) { int i; - int shift = 20; - unsigned long addr,maxend=0; - - for (i = 0; i < numnodes; i++) - if ((nodes[i].start != nodes[i].end) && (nodes[i].end > maxend)) - maxend = nodes[i].end; + int res = -1; + unsigned long addr, end; - while ((1UL << shift) < (maxend / NODEMAPSIZE)) - shift++; - - printk (KERN_DEBUG"Using %d for the hash shift. Max adder is %lx \n", - shift,maxend); - memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE); + memset(memnodemap, 0xff, sizeof(memnodemap)); for (i = 0; i < numnodes; i++) { - if (nodes[i].start == nodes[i].end) + addr = nodes[i].start; + end = nodes[i].end; + if (addr >= end) continue; - for (addr = nodes[i].start; - addr < nodes[i].end; - addr += (1UL << shift)) { - if (memnodemap[addr >> shift] != 0xff) { - printk(KERN_INFO - "Your memory is not aligned you need to rebuild your kernel " - "with a bigger NODEMAPSIZE shift=%d adder=%lu\n", - shift,addr); + if ((end >> shift) >= NODEMAPSIZE) + return 0; + do { + if (memnodemap[addr >> shift] != 0xff) return -1; - } memnodemap[addr >> shift] = i; - } + addr += (1 << shift); + } while (addr < end); + res = 1; } + return res; +} + +int __init compute_hash_shift(struct node *nodes, int numnodes) +{ + int shift = 20; + + while (populate_memnodemap(nodes, numnodes, shift + 1) >= 0) + shift++; + + printk(KERN_DEBUG "Using %d for the hash shift.\n", + shift); + + if (populate_memnodemap(nodes, numnodes, shift) != 1) { + printk(KERN_INFO + "Your memory is not aligned you need to rebuild your kernel " + "with a bigger NODEMAPSIZE shift=%d\n", + shift); + return -1; + } return shift; } @@ -94,7 +113,6 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en start_pfn = start >> PAGE_SHIFT; end_pfn = end >> PAGE_SHIFT; - memory_present(nodeid, start_pfn, end_pfn); nodedata_phys = find_e820_area(start, end, pgdat_size); if (nodedata_phys == -1L) panic("Cannot find memory pgdat in node %d\n", nodeid); @@ -132,29 +150,14 @@ void __init setup_node_zones(int nodeid) unsigned long start_pfn, end_pfn; unsigned long zones[MAX_NR_ZONES]; unsigned long holes[MAX_NR_ZONES]; - unsigned long dma_end_pfn; - memset(zones, 0, sizeof(unsigned long) * MAX_NR_ZONES); - memset(holes, 0, sizeof(unsigned long) * MAX_NR_ZONES); + start_pfn = node_start_pfn(nodeid); + end_pfn = node_end_pfn(nodeid); - start_pfn = node_start_pfn(nodeid); - end_pfn = node_end_pfn(nodeid); + Dprintk(KERN_INFO "setting up node %d %lx-%lx\n", + nodeid, start_pfn, end_pfn); - Dprintk(KERN_INFO "setting up node %d %lx-%lx\n", nodeid, start_pfn, end_pfn); - - /* All nodes > 0 have a zero length zone DMA */ - dma_end_pfn = __pa(MAX_DMA_ADDRESS) >> PAGE_SHIFT; - if (start_pfn < dma_end_pfn) { - zones[ZONE_DMA] = dma_end_pfn - start_pfn; - holes[ZONE_DMA] = e820_hole_size(start_pfn, dma_end_pfn); - zones[ZONE_NORMAL] = end_pfn - dma_end_pfn; - holes[ZONE_NORMAL] = e820_hole_size(dma_end_pfn, end_pfn); - - } else { - zones[ZONE_NORMAL] = end_pfn - start_pfn; - holes[ZONE_NORMAL] = e820_hole_size(start_pfn, end_pfn); - } - + size_zones(zones, holes, start_pfn, end_pfn); free_area_init_node(nodeid, NODE_DATA(nodeid), zones, start_pfn, holes); } @@ -171,7 +174,7 @@ void __init numa_init_array(void) for (i = 0; i < NR_CPUS; i++) { if (cpu_to_node[i] != NUMA_NO_NODE) continue; - cpu_to_node[i] = rr; + numa_set_node(i, rr); rr = next_node(rr, node_online_map); if (rr == MAX_NUMNODES) rr = first_node(node_online_map); @@ -205,8 +208,6 @@ static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn) if (i == numa_fake-1) sz = (end_pfn<<PAGE_SHIFT) - nodes[i].start; nodes[i].end = nodes[i].start + sz; - if (i != numa_fake-1) - nodes[i].end--; printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", i, nodes[i].start, nodes[i].end, @@ -257,7 +258,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) nodes_clear(node_online_map); node_set_online(0); for (i = 0; i < NR_CPUS; i++) - cpu_to_node[i] = 0; + numa_set_node(i, 0); node_to_cpumask[0] = cpumask_of_cpu(0); setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT); } @@ -267,6 +268,12 @@ __cpuinit void numa_add_cpu(int cpu) set_bit(cpu, &node_to_cpumask[cpu_to_node(cpu)]); } +void __cpuinit numa_set_node(int cpu, int node) +{ + cpu_pda[cpu].nodenumber = node; + cpu_to_node[cpu] = node; +} + unsigned long __init numa_free_all_bootmem(void) { int i; @@ -277,9 +284,26 @@ unsigned long __init numa_free_all_bootmem(void) return pages; } +#ifdef CONFIG_SPARSEMEM +static void __init arch_sparse_init(void) +{ + int i; + + for_each_online_node(i) + memory_present(i, node_start_pfn(i), node_end_pfn(i)); + + sparse_init(); +} +#else +#define arch_sparse_init() do {} while (0) +#endif + void __init paging_init(void) { int i; + + arch_sparse_init(); + for_each_online_node(i) { setup_node_zones(i); } diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 4b2e844c15a7..33340bd1e328 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -71,8 +71,6 @@ static __init void cutoff_node(int i, unsigned long start, unsigned long end) nd->start = nd->end; } if (nd->end > end) { - if (!(end & 0xfff)) - end--; nd->end = end; if (nd->start > nd->end) nd->start = nd->end; @@ -166,8 +164,6 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) if (nd->end < end) nd->end = end; } - if (!(nd->end & 0xfff)) - nd->end--; printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm, nd->start, nd->end); } @@ -203,7 +199,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) if (cpu_to_node[i] == NUMA_NO_NODE) continue; if (!node_isset(cpu_to_node[i], nodes_parsed)) - cpu_to_node[i] = NUMA_NO_NODE; + numa_set_node(i, NUMA_NO_NODE); } numa_init_array(); return 0; diff --git a/arch/x86_64/oprofile/Kconfig b/arch/x86_64/oprofile/Kconfig index 5ade19801b97..d8a84088471a 100644 --- a/arch/x86_64/oprofile/Kconfig +++ b/arch/x86_64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 08ef6d82ee51..6a44b54ae817 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -96,8 +96,9 @@ void cpu_idle(void) while (1) { while (!need_resched()) platform_idle(); - preempt_enable(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c index 14460743de07..ab5c4c65b5c4 100644 --- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -45,58 +45,10 @@ void ptrace_disable(struct task_struct *child) /* Nothing to do.. */ } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret = -EPERM; - lock_kernel(); - -#if 0 - if ((int)request != 1) - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - - if (request == PTRACE_TRACEME) { - - /* Are we already being traced? */ - - if (current->ptrace & PT_PTRACED) - goto out; - - if ((ret = security_ptrace(current->parent, current))) - goto out; - - /* Set the ptrace bit in the process flags. */ - - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - if ((ret = ptrace_check_attach(child, request == PTRACE_KILL)) < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: @@ -375,10 +327,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); goto out; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return ret; } diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c index 0682ffd38175..0dc55cc8691b 100644 --- a/arch/xtensa/platform-iss/network.c +++ b/arch/xtensa/platform-iss/network.c @@ -611,46 +611,15 @@ static int iss_net_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; } -static int iss_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ -#if 0 - static const struct ethtool_drvinfo info = { - .cmd = ETHTOOL_GDRVINFO, - .driver = DRIVER_NAME, - .version = "42", - }; - void *useraddr; - u32 ethcmd; - - switch (cmd) { - case SIOCETHTOOL: - useraddr = ifr->ifr_data; - if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) - return -EFAULT; - - switch (ethcmd) { - case ETHTOOL_GDRVINFO: - if (copy_to_user(useraddr, &info, sizeof(info))) - return -EFAULT; - return 0; - default: - return -EOPNOTSUPP; - } - default: - return -EINVAL; - } -#endif - return -EINVAL; -} - void iss_net_user_timer_expire(unsigned long _conn) { } -static struct device_driver iss_net_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver iss_net_driver = { + .driver = { + .name = DRIVER_NAME, + }, }; static int driver_registered; @@ -701,7 +670,7 @@ static int iss_net_configure(int index, char *init) /* sysfs register */ if (!driver_registered) { - driver_register(&iss_net_driver); + platform_driver_register(&iss_net_driver); driver_registered = 1; } @@ -730,7 +699,6 @@ static int iss_net_configure(int index, char *init) dev->tx_timeout = iss_net_tx_timeout; dev->set_mac_address = iss_net_set_mac; dev->change_mtu = iss_net_change_mtu; - dev->do_ioctl = iss_net_ioctl; dev->watchdog_timeo = (HZ >> 1); dev->irq = -1; |