diff options
Diffstat (limited to 'arch/x86_64')
72 files changed, 2608 insertions, 2396 deletions
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 581ce9af0ec8..efe249e7d6b3 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -109,6 +109,7 @@ config X86_PC config X86_VSMP bool "Support for ScaleMP vSMP" + depends on PCI help Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -295,7 +296,7 @@ config NUMA config K8_NUMA bool "Old style AMD Opteron NUMA detection" - depends on NUMA + depends on NUMA && PCI default y help Enable K8 NUMA node topology detection. You should say Y here if @@ -425,7 +426,6 @@ config IOMMU config CALGARY_IOMMU bool "IBM Calgary IOMMU support" - default y select SWIOTLB depends on PCI && EXPERIMENTAL help @@ -472,8 +472,7 @@ config X86_MCE_AMD the DRAM Error Threshold. config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "kexec system call" help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -492,7 +491,14 @@ config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" depends on EXPERIMENTAL help - Generate crash dump after being started by kexec. + Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel or BIOS using + PHYSICAL_START. + For more details see Documentation/kdump/kdump.txt config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) @@ -530,6 +536,30 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config CC_STACKPROTECTOR + bool "Enable -fstack-protector buffer overflow detection (EXPRIMENTAL)" + depends on EXPERIMENTAL + help + This option turns on the -fstack-protector GCC feature. This + feature puts, at the beginning of critical functions, a canary + value on the stack just before the return address, and validates + the value just before actually returning. Stack based buffer + overflows (that need to overwrite this return address) now also + overwrite the canary, which gets detected and the attack is then + neutralized via a kernel panic. + + This feature requires gcc version 4.2 or above, or a distribution + gcc with the feature backported. Older versions are automatically + detected and for those versions, this configuration option is ignored. + +config CC_STACKPROTECTOR_ALL + bool "Use stack-protector for all functions" + depends on CC_STACKPROTECTOR + help + Normally, GCC only inserts the canary value protection for + functions that use large-ish on-stack buffers. By enabling + this option, GCC will be asked to do this for ALL functions. + source kernel/Kconfig.hz config REORDER diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 431bb4bc36cd..1c0f18d4f887 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -54,6 +54,16 @@ endif cflags-y += $(call cc-option,-funit-at-a-time) # prevent gcc from generating any FP code by mistake cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) +# do binutils support CFI? +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) + +# is .cfi_signal_frame supported too? +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) + +cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) -fstack-protector ) +cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) -fstack-protector-all ) CFLAGS += $(cflags-y) CFLAGS_KERNEL += $(cflags-kernel-y) diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile index f89d96f11a9f..e70fa6e1da08 100644 --- a/arch/x86_64/boot/compressed/Makefile +++ b/arch/x86_64/boot/compressed/Makefile @@ -7,7 +7,8 @@ # targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o -EXTRA_AFLAGS := -traditional -m32 +EXTRA_AFLAGS := -traditional +AFLAGS := $(subst -m64,-m32,$(AFLAGS)) # cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with # -m32 diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S index a50b631f4d2b..c3bfd223ab49 100644 --- a/arch/x86_64/boot/setup.S +++ b/arch/x86_64/boot/setup.S @@ -526,12 +526,12 @@ is_disk1: movw %cs, %ax # aka SETUPSEG subw $DELTA_INITSEG, %ax # aka INITSEG movw %ax, %ds - movw $0, (0x1ff) # default is no pointing device + movb $0, (0x1ff) # default is no pointing device int $0x11 # int 0x11: equipment list testb $0x04, %al # check if mouse installed jz no_psmouse - movw $0xAA, (0x1ff) # device present + movb $0xAA, (0x1ff) # device present no_psmouse: #include "../../i386/boot/edd.S" diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 5fb970715941..647610ecb580 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc4 -# Thu Aug 24 21:05:55 2006 +# Linux kernel version: 2.6.18-git5 +# Tue Sep 26 09:30:47 2006 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -19,6 +19,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y +CONFIG_AUDIT_ARCH=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -38,16 +39,16 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -56,12 +57,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -160,6 +161,7 @@ CONFIG_X86_MCE_AMD=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y +# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set @@ -307,18 +309,23 @@ CONFIG_IP_PNP_DHCP=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_SUBTREES is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -345,7 +352,6 @@ CONFIG_IPV6=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -487,6 +493,7 @@ CONFIG_IDEDMA_AUTO=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_NETLINK=y # CONFIG_SCSI_PROC_FS is not set # @@ -508,12 +515,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -532,29 +540,14 @@ CONFIG_AIC79XX_RESET_DELAY_MS=4000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=y CONFIG_MEGARAID_MAILBOX=y # CONFIG_MEGARAID_LEGACY is not set CONFIG_MEGARAID_SAS=y -CONFIG_SCSI_SATA=y -CONFIG_SCSI_SATA_AHCI=y -CONFIG_SCSI_SATA_SVW=y -CONFIG_SCSI_ATA_PIIX=y -# CONFIG_SCSI_SATA_MV is not set -CONFIG_SCSI_SATA_NV=y -# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -CONFIG_SCSI_SATA_SIL=y -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -CONFIG_SCSI_SATA_VIA=y -# CONFIG_SCSI_SATA_VITESSE is not set -CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -563,6 +556,7 @@ CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -573,6 +567,62 @@ CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_SVW=y +CONFIG_ATA_PIIX=y +# CONFIG_SATA_MV is not set +CONFIG_SATA_NV=y +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +CONFIG_SATA_VIA=y +# CONFIG_SATA_VITESSE is not set +CONFIG_SATA_INTEL_COMBINED=y +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# # Multi-device support (RAID and LVM) # CONFIG_MD=y @@ -678,6 +728,7 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=y CONFIG_FORCEDETH=y +# CONFIG_FORCEDETH_NAPI is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y @@ -714,6 +765,7 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y CONFIG_BNX2=y +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -1036,6 +1088,7 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OSS_OBSOLETE_DRIVER=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set @@ -1046,7 +1099,6 @@ CONFIG_SOUND_ICH=y # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_TVMIXER is not set # # USB support @@ -1203,7 +1255,6 @@ CONFIG_USB_MON=y # InfiniBand support # # CONFIG_INFINIBAND is not set -# CONFIG_IPATH_CORE is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -1449,10 +1500,6 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c index 3bf58af98936..396d3c100011 100644 --- a/arch/x86_64/ia32/ia32_aout.c +++ b/arch/x86_64/ia32/ia32_aout.c @@ -333,7 +333,8 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) return error; } - error = bprm->file->f_op->read(bprm->file, (char *)text_addr, + error = bprm->file->f_op->read(bprm->file, + (char __user *)text_addr, ex.a_text+ex.a_data, &pos); if ((signed long)error < 0) { send_sig(SIGKILL, current, 0); @@ -366,7 +367,8 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) down_write(¤t->mm->mmap_sem); do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data); up_write(¤t->mm->mmap_sem); - bprm->file->f_op->read(bprm->file,(char *)N_TXTADDR(ex), + bprm->file->f_op->read(bprm->file, + (char __user *)N_TXTADDR(ex), ex.a_text+ex.a_data, &pos); flush_icache_range((unsigned long) N_TXTADDR(ex), (unsigned long) N_TXTADDR(ex) + @@ -477,7 +479,7 @@ static int load_aout_library(struct file *file) do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss); up_write(¤t->mm->mmap_sem); - file->f_op->read(file, (char *)start_addr, + file->f_op->read(file, (char __user *)start_addr, ex.a_text + ex.a_data, &pos); flush_icache_range((unsigned long) start_addr, (unsigned long) start_addr + ex.a_text + ex.a_data); diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index 25e5ca22204c..a6ba9951e86c 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -113,25 +113,19 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) } asmlinkage long -sys32_sigsuspend(int history0, int history1, old_sigset_t mask, - struct pt_regs *regs) +sys32_sigsuspend(int history0, int history1, old_sigset_t mask) { - sigset_t saveset; - mask &= _BLOCKABLE; spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; + current->saved_sigmask = current->blocked; siginitset(¤t->blocked, mask); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - regs->rax = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset)) - return -EINTR; - } + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; } asmlinkage long @@ -437,15 +431,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) goto give_sigsegv; - { - struct exec_domain *ed = current_thread_info()->exec_domain; - err |= __put_user((ed - && ed->signal_invmap - && sig < 32 - ? ed->signal_invmap[sig] - : sig), - &frame->sig); - } + err |= __put_user(sig, &frame->sig); if (err) goto give_sigsegv; @@ -492,6 +478,11 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, regs->rsp = (unsigned long) frame; regs->rip = (unsigned long) ka->sa.sa_handler; + /* Make -mregparm=3 work */ + regs->rax = sig; + regs->rdx = 0; + regs->rcx = 0; + asm volatile("movl %0,%%ds" :: "r" (__USER32_DS)); asm volatile("movl %0,%%es" :: "r" (__USER32_DS)); @@ -499,20 +490,20 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, regs->ss = __USER32_DS; set_fs(USER_DS); - regs->eflags &= ~TF_MASK; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); + regs->eflags &= ~TF_MASK; + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); #if DEBUG_SIG printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return 1; + return 0; give_sigsegv: force_sigsegv(sig, current); - return 0; + return -EFAULT; } int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, @@ -595,18 +586,18 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->ss = __USER32_DS; set_fs(USER_DS); - regs->eflags &= ~TF_MASK; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); + regs->eflags &= ~TF_MASK; + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); #if DEBUG_SIG printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return 1; + return 0; give_sigsegv: force_sigsegv(sig, current); - return 0; + return -EFAULT; } diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 5d4a7d125ed0..b4aa875e175b 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -71,6 +71,7 @@ */ ENTRY(ia32_sysenter_target) CFI_STARTPROC32 simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,0 CFI_REGISTER rsp,rbp swapgs @@ -186,6 +187,7 @@ ENDPROC(ia32_sysenter_target) */ ENTRY(ia32_cstar_target) CFI_STARTPROC32 simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,PDA_STACKOFFSET CFI_REGISTER rip,rcx /*CFI_REGISTER rflags,r11*/ @@ -293,6 +295,7 @@ ia32_badarg: ENTRY(ia32_syscall) CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-RIP /*CFI_REL_OFFSET ss,SS-RIP*/ CFI_REL_OFFSET rsp,RSP-RIP @@ -370,6 +373,7 @@ ENTRY(ia32_ptregs_common) popq %r11 CFI_ENDPROC CFI_STARTPROC32 simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-ARGOFFSET CFI_REL_OFFSET rax,RAX-ARGOFFSET CFI_REL_OFFSET rcx,RCX-ARGOFFSET @@ -703,8 +707,8 @@ ia32_sys_call_table: .quad sys_readlinkat /* 305 */ .quad sys_fchmodat .quad sys_faccessat - .quad quiet_ni_syscall /* pselect6 for now */ - .quad quiet_ni_syscall /* ppoll for now */ + .quad compat_sys_pselect6 + .quad compat_sys_ppoll .quad sys_unshare /* 310 */ .quad compat_sys_set_robust_list .quad compat_sys_get_robust_list @@ -713,4 +717,5 @@ ia32_sys_call_table: .quad sys_tee .quad compat_sys_vmsplice .quad compat_sys_move_pages + .quad sys_getcpu ia32_syscall_end: diff --git a/arch/x86_64/ia32/ptrace32.c b/arch/x86_64/ia32/ptrace32.c index 659c0722f6b8..d18198ed636b 100644 --- a/arch/x86_64/ia32/ptrace32.c +++ b/arch/x86_64/ia32/ptrace32.c @@ -117,6 +117,10 @@ static int putreg32(struct task_struct *child, unsigned regno, u32 val) if ((0x5454 >> ((val >> (16 + 4*i)) & 0xf)) & 1) return -EIO; child->thread.debugreg7 = val; + if (val) + set_tsk_thread_flag(child, TIF_DEBUG); + else + clear_tsk_thread_flag(child, TIF_DEBUG); break; default: @@ -371,8 +375,10 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data) ret = -EIO; if (!access_ok(VERIFY_READ, u, sizeof(*u))) break; - /* no checking to be bug-to-bug compatible with i386 */ - __copy_from_user(&child->thread.i387.fxsave, u, sizeof(*u)); + /* no checking to be bug-to-bug compatible with i386. */ + /* but silence warning */ + if (__copy_from_user(&child->thread.i387.fxsave, u, sizeof(*u))) + ; set_stopped_child_used_math(child); child->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask; ret = 0; diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index 9c130993380d..b0e82c7947dc 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -60,6 +60,7 @@ #include <linux/highuid.h> #include <linux/vmalloc.h> #include <linux/fsnotify.h> +#include <linux/sysctl.h> #include <asm/mman.h> #include <asm/types.h> #include <asm/uaccess.h> @@ -389,7 +390,9 @@ sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, } } set_fs (KERNEL_DS); - ret = sys_rt_sigprocmask(how, set ? &s : NULL, oset ? &s : NULL, + ret = sys_rt_sigprocmask(how, + set ? (sigset_t __user *)&s : NULL, + oset ? (sigset_t __user *)&s : NULL, sigsetsize); set_fs (old_fs); if (ret) return ret; @@ -541,7 +544,7 @@ sys32_sysinfo(struct sysinfo32 __user *info) int bitcount = 0; set_fs (KERNEL_DS); - ret = sys_sysinfo(&s); + ret = sys_sysinfo((struct sysinfo __user *)&s); set_fs (old_fs); /* Check to see if any memory value is too large for 32-bit and scale @@ -589,7 +592,7 @@ sys32_sched_rr_get_interval(compat_pid_t pid, struct compat_timespec __user *int mm_segment_t old_fs = get_fs (); set_fs (KERNEL_DS); - ret = sys_sched_rr_get_interval(pid, &t); + ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t); set_fs (old_fs); if (put_compat_timespec(&t, interval)) return -EFAULT; @@ -605,7 +608,7 @@ sys32_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize) mm_segment_t old_fs = get_fs(); set_fs (KERNEL_DS); - ret = sys_rt_sigpending(&s, sigsetsize); + ret = sys_rt_sigpending((sigset_t __user *)&s, sigsetsize); set_fs (old_fs); if (!ret) { switch (_NSIG_WORDS) { @@ -630,7 +633,7 @@ sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo) if (copy_siginfo_from_user32(&info, uinfo)) return -EFAULT; set_fs (KERNEL_DS); - ret = sys_rt_sigqueueinfo(pid, sig, &info); + ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *)&info); set_fs (old_fs); return ret; } @@ -666,9 +669,6 @@ sys32_sysctl(struct sysctl_ia32 __user *args32) size_t oldlen; int __user *namep; long ret; - extern int do_sysctl(int *name, int nlen, void *oldval, size_t *oldlenp, - void *newval, size_t newlen); - if (copy_from_user(&a32, args32, sizeof (a32))) return -EFAULT; @@ -692,7 +692,8 @@ sys32_sysctl(struct sysctl_ia32 __user *args32) set_fs(KERNEL_DS); lock_kernel(); - ret = do_sysctl(namep, a32.nlen, oldvalp, &oldlen, newvalp, (size_t) a32.newlen); + ret = do_sysctl(namep, a32.nlen, oldvalp, (size_t __user *)&oldlen, + newvalp, (size_t) a32.newlen); unlock_kernel(); set_fs(old_fs); @@ -743,7 +744,8 @@ sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) return -EFAULT; set_fs(KERNEL_DS); - ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count); + ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL, + count); set_fs(old_fs); if (offset && put_user(of, offset)) @@ -778,7 +780,7 @@ asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len, asmlinkage long sys32_olduname(struct oldold_utsname __user * name) { - int error; + int err; if (!name) return -EFAULT; @@ -787,27 +789,31 @@ asmlinkage long sys32_olduname(struct oldold_utsname __user * name) down_read(&uts_sem); - error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN); - __put_user(0,name->sysname+__OLD_UTS_LEN); - __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN); - __put_user(0,name->nodename+__OLD_UTS_LEN); - __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN); - __put_user(0,name->release+__OLD_UTS_LEN); - __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN); - __put_user(0,name->version+__OLD_UTS_LEN); + err = __copy_to_user(&name->sysname,&system_utsname.sysname, + __OLD_UTS_LEN); + err |= __put_user(0,name->sysname+__OLD_UTS_LEN); + err |= __copy_to_user(&name->nodename,&system_utsname.nodename, + __OLD_UTS_LEN); + err |= __put_user(0,name->nodename+__OLD_UTS_LEN); + err |= __copy_to_user(&name->release,&system_utsname.release, + __OLD_UTS_LEN); + err |= __put_user(0,name->release+__OLD_UTS_LEN); + err |= __copy_to_user(&name->version,&system_utsname.version, + __OLD_UTS_LEN); + err |= __put_user(0,name->version+__OLD_UTS_LEN); { char *arch = "x86_64"; if (personality(current->personality) == PER_LINUX32) arch = "i686"; - __copy_to_user(&name->machine,arch,strlen(arch)+1); + err |= __copy_to_user(&name->machine,arch,strlen(arch)+1); } up_read(&uts_sem); - error = error ? -EFAULT : 0; + err = err ? -EFAULT : 0; - return error; + return err; } long sys32_uname(struct old_utsname __user * name) @@ -831,7 +837,7 @@ long sys32_ustat(unsigned dev, struct ustat32 __user *u32p) seg = get_fs(); set_fs(KERNEL_DS); - ret = sys_ustat(dev,&u); + ret = sys_ustat(dev, (struct ustat __user *)&u); set_fs(seg); if (ret >= 0) { if (!access_ok(VERIFY_WRITE,u32p,sizeof(struct ustat32)) || diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index b5aaeafc1cd3..3c7cbff04d3d 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -11,7 +11,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ pci-dma.o pci-nommu.o alternative.o obj-$(CONFIG_STACKTRACE) += stacktrace.o -obj-$(CONFIG_X86_MCE) += mce.o +obj-$(CONFIG_X86_MCE) += mce.o therm_throt.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/ @@ -20,8 +20,8 @@ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o -obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o -obj-$(CONFIG_X86_IO_APIC) += io_apic.o mpparse.o \ +obj-y += apic.o nmi.o +obj-y += io_apic.o mpparse.o \ genapic.o genapic_cluster.o genapic_flat.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o @@ -39,12 +39,14 @@ obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_AUDIT) += audit.o obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_PCI) += early-quirks.o obj-y += topology.o obj-y += intel_cacheinfo.o CFLAGS_vsyscall.o := $(PROFILING) -g0 +therm_throt-y += ../../i386/kernel/cpu/mcheck/therm_throt.o bootflag-y += ../../i386/kernel/bootflag.o cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o topology-y += ../../i386/kernel/topology.o @@ -54,4 +56,3 @@ quirks-y += ../../i386/kernel/quirks.o i8237-y += ../../i386/kernel/i8237.o msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o alternative-y += ../../i386/kernel/alternative.o - diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index 58af8e73738b..b487396c4c5b 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -17,6 +17,7 @@ #include <linux/pci_ids.h> #include <linux/pci.h> #include <linux/bitops.h> +#include <linux/ioport.h> #include <asm/e820.h> #include <asm/io.h> #include <asm/proto.h> @@ -33,6 +34,18 @@ int fallback_aper_force __initdata = 0; int fix_aperture __initdata = 1; +static struct resource gart_resource = { + .name = "GART", + .flags = IORESOURCE_MEM, +}; + +static void __init insert_aperture_resource(u32 aper_base, u32 aper_size) +{ + gart_resource.start = aper_base; + gart_resource.end = aper_base + aper_size - 1; + insert_resource(&iomem_resource, &gart_resource); +} + /* This code runs before the PCI subsystem is initialized, so just access the northbridge directly. */ @@ -48,7 +61,7 @@ static u32 __init allocate_aperture(void) /* * Aperture has to be naturally aligned. This means an 2GB aperture won't - * have much chances to find a place in the lower 4GB of memory. + * have much chance of finding a place in the lower 4GB of memory. * Unfortunately we cannot move it up because that would make the * IOMMU useless. */ @@ -62,6 +75,7 @@ static u32 __init allocate_aperture(void) } printk("Mapping aperture over %d KB of RAM @ %lx\n", aper_size >> 10, __pa(p)); + insert_aperture_resource((u32)__pa(p), aper_size); return (u32)__pa(p); } @@ -198,7 +212,7 @@ void __init iommu_hole_init(void) u64 aper_base, last_aper_base = 0; int valid_agp = 0; - if (iommu_aperture_disabled || !fix_aperture) + if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) return; printk("Checking aperture...\n"); @@ -233,8 +247,13 @@ void __init iommu_hole_init(void) last_aper_base = aper_base; } - if (!fix && !fallback_aper_force) + if (!fix && !fallback_aper_force) { + if (last_aper_base) { + unsigned long n = (32 * 1024 * 1024) << last_aper_order; + insert_aperture_resource((u32)last_aper_base, n); + } return; + } if (!fallback_aper_force) aper_alloc = search_agp_bridge(&aper_order, &valid_agp); diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 2b8cef037a65..135ff25e6b44 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -25,6 +25,7 @@ #include <linux/kernel_stat.h> #include <linux/sysdev.h> #include <linux/module.h> +#include <linux/ioport.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -36,13 +37,20 @@ #include <asm/idle.h> #include <asm/proto.h> #include <asm/timex.h> +#include <asm/apic.h> +int apic_mapped; int apic_verbosity; int apic_runs_main_timer; int apic_calibrate_pmtmr __initdata; int disable_apic_timer __initdata; +static struct resource lapic_resource = { + .name = "Local APIC", + .flags = IORESOURCE_MEM | IORESOURCE_BUSY, +}; + /* * cpu_mask that denotes the CPUs that needs timer interrupt coming in as * IPIs in place of local APIC timers @@ -136,72 +144,40 @@ void clear_local_APIC(void) apic_read(APIC_ESR); } -void __init connect_bsp_APIC(void) -{ - if (pic_mode) { - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - /* - * PIC mode, enable APIC mode in the IMCR, i.e. - * connect BSP's local APIC to INT and NMI lines. - */ - apic_printk(APIC_VERBOSE, "leaving PIC mode, enabling APIC mode.\n"); - outb(0x70, 0x22); - outb(0x01, 0x23); - } -} - void disconnect_bsp_APIC(int virt_wire_setup) { - if (pic_mode) { - /* - * Put the board back into PIC mode (has an effect - * only on certain older boards). Note that APIC - * interrupts, including IPIs, won't work beyond - * this point! The only exception are INIT IPIs. - */ - apic_printk(APIC_QUIET, "disabling APIC mode, entering PIC mode.\n"); - outb(0x70, 0x22); - outb(0x00, 0x23); - } - else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; - - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write(APIC_SPIV, value); - - if (!virt_wire_setup) { - /* For LVT0 make it edge triggered, active high, external and enabled */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write(APIC_LVT0, value); - } - else { - /* Disable LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED); - } + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; + + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); - /* For LVT1 make it edge triggered, active high, nmi and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | + if (!virt_wire_setup) { + /* For LVT0 make it edge triggered, active high, external and enabled */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write(APIC_LVT1, value); + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); } + + /* For LVT1 make it edge triggered, active high, nmi and enabled */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); } void disable_local_APIC(void) @@ -297,8 +273,6 @@ void __init sync_Arb_IDs(void) | APIC_DM_INIT); } -extern void __error_in_apic_c (void); - /* * An initial setup of the virtual wire mode. */ @@ -345,8 +319,7 @@ void __cpuinit setup_local_APIC (void) value = apic_read(APIC_LVR); - if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f) - __error_in_apic_c(); + BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f); /* * Double-check whether this APIC is really registered. @@ -399,32 +372,8 @@ void __cpuinit setup_local_APIC (void) */ value |= APIC_SPIV_APIC_ENABLED; - /* - * Some unknown Intel IO/APIC (or APIC) errata is biting us with - * certain networking cards. If high frequency interrupts are - * happening on a particular IOAPIC pin, plus the IOAPIC routing - * entry is masked/unmasked at a high rate as well then sooner or - * later IOAPIC line gets 'stuck', no more interrupts are received - * from the device. If focus CPU is disabled then the hang goes - * away, oh well :-( - * - * [ This bug can be reproduced easily with a level-triggered - * PCI Ne2000 networking cards and PII/PIII processors, dual - * BX chipset. ] - */ - /* - * Actually disabling the focus CPU check just makes the hang less - * frequent as it makes the interrupt distributon model be more - * like LRU than MRU (the short-term load is more even across CPUs). - * See also the comment in end_level_ioapic_irq(). --macro - */ -#if 1 - /* Enable focus processor (bit==0) */ - value &= ~APIC_SPIV_FOCUS_DISABLED; -#else - /* Disable focus processor (bit==1) */ - value |= APIC_SPIV_FOCUS_DISABLED; -#endif + /* We always use processor focus */ + /* * Set spurious IRQ vector */ @@ -442,7 +391,7 @@ void __cpuinit setup_local_APIC (void) * TODO: set up through-local-APIC from through-I/O-APIC? --macro */ value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; - if (!smp_processor_id() && (pic_mode || !value)) { + if (!smp_processor_id() && !value) { value = APIC_DM_EXTINT; apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id()); } else { @@ -479,8 +428,7 @@ void __cpuinit setup_local_APIC (void) } nmi_watchdog_default(); - if (nmi_watchdog == NMI_LOCAL_APIC) - setup_apic_nmi_watchdog(); + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } @@ -527,8 +475,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); disable_local_APIC(); local_irq_restore(flags); return 0; @@ -606,18 +553,24 @@ static void apic_pm_activate(void) { } static int __init apic_set_verbosity(char *str) { + if (str == NULL) { + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; + } if (strcmp("debug", str) == 0) apic_verbosity = APIC_DEBUG; else if (strcmp("verbose", str) == 0) apic_verbosity = APIC_VERBOSE; - else + else { printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug", str); + " use apic=verbose or apic=debug\n", str); + return -EINVAL; + } - return 1; + return 0; } - -__setup("apic=", apic_set_verbosity); +early_param("apic", apic_set_verbosity); /* * Detect and enable local APICs on non-SMP boards. @@ -638,6 +591,40 @@ static int __init detect_init_APIC (void) return 0; } +#ifdef CONFIG_X86_IO_APIC +static struct resource * __init ioapic_setup_resources(void) +{ +#define IOAPIC_RESOURCE_NAME_SIZE 11 + unsigned long n; + struct resource *res; + char *mem; + int i; + + if (nr_ioapics <= 0) + return NULL; + + n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); + n *= nr_ioapics; + + res = alloc_bootmem(n); + + if (!res) + return NULL; + + memset(res, 0, n); + mem = (void *)&res[nr_ioapics]; + + for (i = 0; i < nr_ioapics; i++) { + res[i].name = mem; + res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); + mem += IOAPIC_RESOURCE_NAME_SIZE; + } + + return res; +} +#endif + void __init init_apic_mappings(void) { unsigned long apic_phys; @@ -654,19 +641,26 @@ void __init init_apic_mappings(void) apic_phys = mp_lapic_addr; set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + apic_mapped = 1; apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys); + /* Put local APIC into the resource map. */ + lapic_resource.start = apic_phys; + lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; + insert_resource(&iomem_resource, &lapic_resource); + /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); -#ifdef CONFIG_X86_IO_APIC { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; int i; + struct resource *ioapic_res; + ioapic_res = ioapic_setup_resources(); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { ioapic_phys = mp_ioapics[i].mpc_apicaddr; @@ -678,9 +672,15 @@ void __init init_apic_mappings(void) apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n", __fix_to_virt(idx), ioapic_phys); idx++; + + if (ioapic_res) { + ioapic_res->start = ioapic_phys; + ioapic_res->end = ioapic_phys + (4 * 1024) - 1; + insert_resource(&iomem_resource, ioapic_res); + ioapic_res++; + } } } -#endif } /* @@ -951,7 +951,7 @@ void smp_local_timer_interrupt(struct pt_regs *regs) * We take the 'long' return path, and there every subsystem * grabs the appropriate locks (kernel lock/ irq lock). * - * we might want to decouple profiling from the 'long path', + * We might want to decouple profiling from the 'long path', * and do the profiling totally in assembly. * * Currently this isn't too much of an issue (performance wise), @@ -1123,19 +1123,15 @@ int __init APIC_init_uniprocessor (void) verify_local_APIC(); - connect_bsp_APIC(); - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id)); setup_local_APIC(); -#ifdef CONFIG_X86_IO_APIC if (smp_found_config && !skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); + setup_IO_APIC(); else nr_ioapics = 0; -#endif setup_boot_APIC_clock(); check_nmi_watchdog(); return 0; @@ -1144,14 +1140,17 @@ int __init APIC_init_uniprocessor (void) static __init int setup_disableapic(char *str) { disable_apic = 1; - return 1; -} + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return 0; +} +early_param("disableapic", setup_disableapic); +/* same as disableapic, for compatibility */ static __init int setup_nolapic(char *str) { - disable_apic = 1; - return 1; + return setup_disableapic(str); } +early_param("nolapic", setup_nolapic); static __init int setup_noapictimer(char *str) { @@ -1184,11 +1183,5 @@ static __init int setup_apicpmtimer(char *s) } __setup("apicpmtimer", setup_apicpmtimer); -/* dummy parsing: see setup.c */ - -__setup("disableapic", setup_disableapic); -__setup("nolapic", setup_nolapic); /* same as disableapic, for compatibility */ - __setup("noapictimer", setup_noapictimer); -/* no "lapic" flag - we only use the lapic when the BIOS tells us so. */ diff --git a/arch/x86_64/kernel/crash.c b/arch/x86_64/kernel/crash.c index d8d5750d6106..3525f884af82 100644 --- a/arch/x86_64/kernel/crash.c +++ b/arch/x86_64/kernel/crash.c @@ -23,6 +23,7 @@ #include <asm/nmi.h> #include <asm/hw_irq.h> #include <asm/mach_apic.h> +#include <asm/kdebug.h> /* This keeps a track of which one is crashing cpu. */ static int crashing_cpu; @@ -68,7 +69,7 @@ static void crash_save_this_cpu(struct pt_regs *regs, int cpu) * for the data I pass, and I need tags * on the data to indicate what information I have * squirrelled away. ELF notes happen to provide - * all of that that no need to invent something new. + * all of that, no need to invent something new. */ buf = (u32*)per_cpu_ptr(crash_notes, cpu); @@ -95,15 +96,25 @@ static void crash_save_self(struct pt_regs *regs) #ifdef CONFIG_SMP static atomic_t waiting_for_crash_ipi; -static int crash_nmi_callback(struct pt_regs *regs, int cpu) +static int crash_nmi_callback(struct notifier_block *self, + unsigned long val, void *data) { + struct pt_regs *regs; + int cpu; + + if (val != DIE_NMI_IPI) + return NOTIFY_OK; + + regs = ((struct die_args *)data)->regs; + cpu = raw_smp_processor_id(); + /* * Don't do anything if this handler is invoked on crashing cpu. * Otherwise, system will completely hang. Crashing cpu can get * an NMI if system was initially booted with nmi_watchdog parameter. */ if (cpu == crashing_cpu) - return 1; + return NOTIFY_STOP; local_irq_disable(); crash_save_this_cpu(regs, cpu); @@ -127,12 +138,17 @@ static void smp_send_nmi_allbutself(void) * cpu hotplug shouldn't matter. */ +static struct notifier_block crash_nmi_nb = { + .notifier_call = crash_nmi_callback, +}; + static void nmi_shootdown_cpus(void) { unsigned long msecs; atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); - set_nmi_callback(crash_nmi_callback); + if (register_die_notifier(&crash_nmi_nb)) + return; /* return what? */ /* * Ensure the new callback function is set before sending @@ -178,9 +194,7 @@ void machine_crash_shutdown(struct pt_regs *regs) if(cpu_has_apic) disable_local_APIC(); -#if defined(CONFIG_X86_IO_APIC) disable_IO_APIC(); -#endif crash_save_self(regs); } diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 708a3cd9a27e..c0af3828df45 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -25,6 +25,8 @@ #include <asm/bootsetup.h> #include <asm/sections.h> +struct e820map e820 __initdata; + /* * PFN of last memory page. */ @@ -41,7 +43,7 @@ unsigned long end_pfn_map; /* * Last pfn which the user wants to use. */ -unsigned long end_user_pfn = MAXMEM>>PAGE_SHIFT; +static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; extern struct resource code_resource, data_resource; @@ -70,12 +72,7 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size) return 1; } #endif - /* kernel code + 640k memory hole (later should not be needed, but - be paranoid for now) */ - if (last >= 640*1024 && addr < 1024*1024) { - *addrp = 1024*1024; - return 1; - } + /* kernel code */ if (last >= __pa_symbol(&_text) && last < __pa_symbol(&_end)) { *addrp = __pa_symbol(&_end); return 1; @@ -565,13 +562,6 @@ static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) * If we're lucky and live on a modern system, the setup code * will have given us a memory map that we can use to properly * set up memory. If we aren't, we'll fake a memory map. - * - * We check to see that the memory map contains at least 2 elements - * before we'll use it, because the detection code in setup.S may - * not be perfect and most every PC known to man has two memory - * regions: one from 0 to 640k, and one from 1mb up. (The IBM - * thinkpad 560x, for example, does not cooperate with the memory - * detection code.) */ static int __init copy_e820_map(struct e820entry * biosmap, int nr_map) { @@ -589,34 +579,19 @@ static int __init copy_e820_map(struct e820entry * biosmap, int nr_map) if (start > end) return -1; - /* - * Some BIOSes claim RAM in the 640k - 1M region. - * Not right. Fix it up. - * - * This should be removed on Hammer which is supposed to not - * have non e820 covered ISA mappings there, but I had some strange - * problems so it stays for now. -AK - */ - if (type == E820_RAM) { - if (start < 0x100000ULL && end > 0xA0000ULL) { - if (start < 0xA0000ULL) - add_memory_region(start, 0xA0000ULL-start, type); - if (end <= 0x100000ULL) - continue; - start = 0x100000ULL; - size = end - start; - } - } - add_memory_region(start, size, type); } while (biosmap++,--nr_map); return 0; } -void __init setup_memory_region(void) +void early_panic(char *msg) { - char *who = "BIOS-e820"; + early_printk(msg); + panic(msg); +} +void __init setup_memory_region(void) +{ /* * Try to copy the BIOS-supplied E820-map. * @@ -624,51 +599,70 @@ void __init setup_memory_region(void) * the next section from 1mb->appropriate_mem_k */ sanitize_e820_map(E820_MAP, &E820_MAP_NR); - if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) { - unsigned long mem_size; - - /* compare results from other methods and take the greater */ - if (ALT_MEM_K < EXT_MEM_K) { - mem_size = EXT_MEM_K; - who = "BIOS-88"; - } else { - mem_size = ALT_MEM_K; - who = "BIOS-e801"; - } - - e820.nr_map = 0; - add_memory_region(0, LOWMEMSIZE(), E820_RAM); - add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM); - } + if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) + early_panic("Cannot find a valid memory map"); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - e820_print_map(who); + e820_print_map("BIOS-e820"); } -void __init parse_memopt(char *p, char **from) -{ - end_user_pfn = memparse(p, from); +static int __init parse_memopt(char *p) +{ + if (!p) + return -EINVAL; + end_user_pfn = memparse(p, &p); end_user_pfn >>= PAGE_SHIFT; + return 0; } +early_param("mem", parse_memopt); -void __init parse_memmapopt(char *p, char **from) +static int userdef __initdata; + +static int __init parse_memmap_opt(char *p) { + char *oldp; unsigned long long start_at, mem_size; - mem_size = memparse(p, from); - p = *from; + if (!strcmp(p, "exactmap")) { +#ifdef CONFIG_CRASH_DUMP + /* If we are doing a crash dump, we + * still need to know the real mem + * size before original memory map is + * reset. + */ + saved_max_pfn = e820_end_of_ram(); +#endif + end_pfn_map = 0; + e820.nr_map = 0; + userdef = 1; + return 0; + } + + oldp = p; + mem_size = memparse(p, &p); + if (p == oldp) + return -EINVAL; if (*p == '@') { - start_at = memparse(p+1, from); + start_at = memparse(p+1, &p); add_memory_region(start_at, mem_size, E820_RAM); } else if (*p == '#') { - start_at = memparse(p+1, from); + start_at = memparse(p+1, &p); add_memory_region(start_at, mem_size, E820_ACPI); } else if (*p == '$') { - start_at = memparse(p+1, from); + start_at = memparse(p+1, &p); add_memory_region(start_at, mem_size, E820_RESERVED); } else { end_user_pfn = (mem_size >> PAGE_SHIFT); } - p = *from; + return *p == '\0' ? 0 : -EINVAL; +} +early_param("memmap", parse_memmap_opt); + +void finish_e820_parsing(void) +{ + if (userdef) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + e820_print_map("user"); + } } unsigned long pci_mem_start = 0xaeedbabe; diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c new file mode 100644 index 000000000000..208e38a372c1 --- /dev/null +++ b/arch/x86_64/kernel/early-quirks.c @@ -0,0 +1,122 @@ +/* Various workarounds for chipset bugs. + This code runs very early and can't use the regular PCI subsystem + The entries are keyed to PCI bridges which usually identify chipsets + uniquely. + This is only for whole classes of chipsets with specific problems which + need early invasive action (e.g. before the timers are initialized). + Most PCI device specific workarounds can be done later and should be + in standard PCI quirks + Mainboard specific bugs should be handled by DMI entries. + CPU specific bugs in setup.c */ + +#include <linux/pci.h> +#include <linux/acpi.h> +#include <linux/pci_ids.h> +#include <asm/pci-direct.h> +#include <asm/proto.h> +#include <asm/dma.h> + +static void via_bugs(void) +{ +#ifdef CONFIG_IOMMU + if ((end_pfn > MAX_DMA32_PFN || force_iommu) && + !iommu_aperture_allowed) { + printk(KERN_INFO + "Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed\n"); + iommu_aperture_disabled = 1; + } +#endif +} + +#ifdef CONFIG_ACPI + +static int nvidia_hpet_detected __initdata; + +static int __init nvidia_hpet_check(unsigned long phys, unsigned long size) +{ + nvidia_hpet_detected = 1; + return 0; +} +#endif + +static void nvidia_bugs(void) +{ +#ifdef CONFIG_ACPI + /* + * All timer overrides on Nvidia are + * wrong unless HPET is enabled. + */ + nvidia_hpet_detected = 0; + acpi_table_parse(ACPI_HPET, nvidia_hpet_check); + if (nvidia_hpet_detected == 0) { + acpi_skip_timer_override = 1; + printk(KERN_INFO "Nvidia board " + "detected. Ignoring ACPI " + "timer override.\n"); + } +#endif + /* RED-PEN skip them on mptables too? */ + +} + +static void ati_bugs(void) +{ +#if 1 /* for testing */ + printk("ATI board detected\n"); +#endif + /* No bugs right now */ +} + +struct chipset { + u16 vendor; + void (*f)(void); +}; + +static struct chipset early_qrk[] = { + { PCI_VENDOR_ID_NVIDIA, nvidia_bugs }, + { PCI_VENDOR_ID_VIA, via_bugs }, + { PCI_VENDOR_ID_ATI, ati_bugs }, + {} +}; + +void __init early_quirks(void) +{ + int num, slot, func; + + if (!early_pci_allowed()) + return; + + /* Poor man's PCI discovery */ + for (num = 0; num < 32; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + u32 class; + u32 vendor; + u8 type; + int i; + class = read_pci_config(num,slot,func, + PCI_CLASS_REVISION); + if (class == 0xffffffff) + break; + + if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) + continue; + + vendor = read_pci_config(num, slot, func, + PCI_VENDOR_ID); + vendor &= 0xffff; + + for (i = 0; early_qrk[i].f; i++) + if (early_qrk[i].vendor == vendor) { + early_qrk[i].f(); + return; + } + + type = read_pci_config_byte(num, slot, func, + PCI_HEADER_TYPE); + if (!(type & 0x80)) + break; + } + } + } +} diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index 140051e07fa6..e22ecd54870d 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -215,20 +215,16 @@ void early_printk(const char *fmt, ...) static int __initdata keep_early; -int __init setup_early_printk(char *opt) +static int __init setup_early_printk(char *buf) { - char *space; - char buf[256]; + if (!buf) + return 0; if (early_console_initialized) - return 1; - - strlcpy(buf,opt,sizeof(buf)); - space = strchr(buf, ' '); - if (space) - *space = 0; + return 0; + early_console_initialized = 1; - if (strstr(buf,"keep")) + if (!strcmp(buf,"keep")) keep_early = 1; if (!strncmp(buf, "serial", 6)) { @@ -248,11 +244,12 @@ int __init setup_early_printk(char *opt) early_console = &simnow_console; keep_early = 1; } - early_console_initialized = 1; register_console(early_console); return 0; } +early_param("earlyprintk", setup_early_printk); + void __init disable_early_printk(void) { if (!early_console_initialized || !early_console) @@ -266,4 +263,3 @@ void __init disable_early_printk(void) } } -__setup("earlyprintk=", setup_early_printk); diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index aa8d8939abc1..2802524104f3 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -4,8 +4,6 @@ * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> - * - * $Id$ */ /* @@ -22,15 +20,25 @@ * at the top of the kernel process stack. * - partial stack frame: partially saved registers upto R11. * - full stack frame: Like partial stack frame, but all register saved. - * - * TODO: - * - schedule it carefully for the final hardware. + * + * Some macro usage: + * - CFI macros are used to generate dwarf2 unwind information for better + * backtraces. They don't change any code. + * - SAVE_ALL/RESTORE_ALL - Save/restore all registers + * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify. + * There are unfortunately lots of special cases where some registers + * not touched. The macro is a big mess that should be cleaned up. + * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS. + * Gives a full stack frame. + * - ENTRY/END Define functions in the symbol table. + * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack + * frame that is otherwise undefined after a SYSCALL + * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. + * - errorentry/paranoidentry/zeroentry - Define exception entry points. */ -#define ASSEMBLY 1 #include <linux/linkage.h> #include <asm/segment.h> -#include <asm/smp.h> #include <asm/cache.h> #include <asm/errno.h> #include <asm/dwarf2.h> @@ -115,6 +123,7 @@ .macro CFI_DEFAULT_STACK start=1 .if \start CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8 .else CFI_DEF_CFA_OFFSET SS+8 @@ -146,6 +155,10 @@ /* rdi: prev */ ENTRY(ret_from_fork) CFI_DEFAULT_STACK + push kernel_eflags(%rip) + CFI_ADJUST_CFA_OFFSET 4 + popf # reset kernel eflags + CFI_ADJUST_CFA_OFFSET -4 call schedule_tail GET_THREAD_INFO(%rcx) testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx) @@ -199,6 +212,7 @@ END(ret_from_fork) ENTRY(system_call) CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,PDA_STACKOFFSET CFI_REGISTER rip,rcx /*CFI_REGISTER rflags,r11*/ @@ -316,6 +330,7 @@ END(system_call) */ ENTRY(int_ret_from_sys_call) CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-ARGOFFSET /*CFI_REL_OFFSET ss,SS-ARGOFFSET*/ CFI_REL_OFFSET rsp,RSP-ARGOFFSET @@ -476,6 +491,7 @@ END(stub_rt_sigreturn) */ .macro _frame ref CFI_STARTPROC simple + CFI_SIGNAL_FRAME CFI_DEF_CFA rsp,SS+8-\ref /*CFI_REL_OFFSET ss,SS-\ref*/ CFI_REL_OFFSET rsp,RSP-\ref @@ -511,7 +527,12 @@ END(stub_rt_sigreturn) testl $3,CS(%rdi) je 1f swapgs -1: incl %gs:pda_irqcount # RED-PEN should check preempt count + /* irqcount is used to check if a CPU is already on an interrupt + stack or not. While this is essentially redundant with preempt_count + it is a little cheaper to use a separate counter in the PDA + (short of moving irq_enter into assembly, which would be too + much work) */ +1: incl %gs:pda_irqcount cmoveq %gs:pda_irqstackptr,%rsp push %rbp # backlink for old unwinder /* @@ -619,8 +640,7 @@ retint_signal: #ifdef CONFIG_PREEMPT /* Returning to kernel space. Check if we need preemption */ /* rcx: threadinfo. interrupts off. */ - .p2align -retint_kernel: +ENTRY(retint_kernel) cmpl $0,threadinfo_preempt_count(%rcx) jnz retint_restore_args bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx) @@ -679,7 +699,6 @@ ENTRY(call_function_interrupt) END(call_function_interrupt) #endif -#ifdef CONFIG_X86_LOCAL_APIC ENTRY(apic_timer_interrupt) apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt END(apic_timer_interrupt) @@ -691,7 +710,6 @@ END(error_interrupt) ENTRY(spurious_interrupt) apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt END(spurious_interrupt) -#endif /* * Exception entry points. @@ -768,7 +786,9 @@ paranoid_exit\trace: testl $3,CS(%rsp) jnz paranoid_userspace\trace paranoid_swapgs\trace: + .if \trace TRACE_IRQS_IRETQ 0 + .endif swapgs paranoid_restore\trace: RESTORE_ALL 8 @@ -814,7 +834,7 @@ paranoid_schedule\trace: * Exception entry point. This expects an error code/orig_rax on the stack * and the exception handler in %rax. */ -ENTRY(error_entry) +KPROBE_ENTRY(error_entry) _frame RDI /* rdi slot contains rax, oldrax contains error code */ cld @@ -898,7 +918,7 @@ error_kernelspace: cmpq $gs_change,RIP(%rsp) je error_swapgs jmp error_sti -END(error_entry) +KPROBE_END(error_entry) /* Reload gs selector with exception handling */ /* edi: new selector */ @@ -1020,8 +1040,7 @@ ENDPROC(execve) KPROBE_ENTRY(page_fault) errorentry do_page_fault -END(page_fault) - .previous .text +KPROBE_END(page_fault) ENTRY(coprocessor_error) zeroentry do_coprocessor_error @@ -1042,8 +1061,7 @@ KPROBE_ENTRY(debug) CFI_ADJUST_CFA_OFFSET 8 paranoidentry do_debug, DEBUG_STACK paranoidexit -END(debug) - .previous .text +KPROBE_END(debug) /* runs on exception stack */ KPROBE_ENTRY(nmi) @@ -1057,8 +1075,7 @@ KPROBE_ENTRY(nmi) jmp paranoid_exit1 CFI_ENDPROC #endif -END(nmi) - .previous .text +KPROBE_END(nmi) KPROBE_ENTRY(int3) INTR_FRAME @@ -1067,8 +1084,7 @@ KPROBE_ENTRY(int3) paranoidentry do_int3, DEBUG_STACK jmp paranoid_exit1 CFI_ENDPROC -END(int3) - .previous .text +KPROBE_END(int3) ENTRY(overflow) zeroentry do_overflow @@ -1116,8 +1132,7 @@ END(stack_segment) KPROBE_ENTRY(general_protection) errorentry do_general_protection -END(general_protection) - .previous .text +KPROBE_END(general_protection) ENTRY(alignment_check) errorentry do_alignment_check diff --git a/arch/x86_64/kernel/genapic_cluster.c b/arch/x86_64/kernel/genapic_cluster.c index 3020917546de..cdb90e671b88 100644 --- a/arch/x86_64/kernel/genapic_cluster.c +++ b/arch/x86_64/kernel/genapic_cluster.c @@ -118,7 +118,6 @@ struct genapic apic_cluster = { .name = "clustered", .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), - .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_FIXED, .target_cpus = cluster_target_cpus, .apic_id_registered = cluster_apic_id_registered, .init_apic_ldr = cluster_init_apic_ldr, diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c index eb86d374813a..50ad153eaac4 100644 --- a/arch/x86_64/kernel/genapic_flat.c +++ b/arch/x86_64/kernel/genapic_flat.c @@ -49,8 +49,7 @@ static void flat_send_IPI_mask(cpumask_t cpumask, int vector) unsigned long cfg; unsigned long flags; - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); /* * Wait for idle. @@ -121,7 +120,6 @@ struct genapic apic_flat = { .name = "flat", .int_delivery_mode = dest_LowestPrio, .int_dest_mode = (APIC_DEST_LOGICAL != 0), - .int_delivery_dest = APIC_DEST_LOGICAL | APIC_DM_LOWEST, .target_cpus = flat_target_cpus, .apic_id_registered = flat_apic_id_registered, .init_apic_ldr = flat_init_apic_ldr, @@ -180,7 +178,6 @@ struct genapic apic_physflat = { .name = "physical flat", .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), - .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_FIXED, .target_cpus = physflat_target_cpus, .apic_id_registered = flat_apic_id_registered, .init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/ diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index c9739ca81d06..1e6f80870679 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -5,8 +5,6 @@ * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> * Copyright (C) 2000 Karsten Keil <kkeil@suse.de> * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de> - * - * $Id: head.S,v 1.49 2002/03/19 17:39:25 ak Exp $ */ @@ -187,12 +185,15 @@ startup_64: /* Finally jump to run C code and to be on real kernel address * Since we are running on identity-mapped space we have to jump - * to the full 64bit address , this is only possible as indirect - * jump + * to the full 64bit address, this is only possible as indirect + * jump. In addition we need to ensure %cs is set so we make this + * a far return. */ movq initial_code(%rip),%rax - pushq $0 # fake return address - jmp *%rax + pushq $0 # fake return address to stop unwinder + pushq $__KERNEL_CS # set correct cs + pushq %rax # target address in negative space + lretq /* SMP bootup changes these two */ .align 8 @@ -371,7 +372,7 @@ ENTRY(cpu_gdt_table) .quad 0,0 /* TSS */ .quad 0,0 /* LDT */ .quad 0,0,0 /* three TLS descriptors */ - .quad 0 /* unused */ + .quad 0x0000f40000000000 /* node/CPU stored in limit */ gdt_end: /* asm/segment.h:GDT_ENTRIES must match this */ /* This should be a multiple of the cache line size */ diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c index 36647ce6aecb..9561eb3c5b5c 100644 --- a/arch/x86_64/kernel/head64.c +++ b/arch/x86_64/kernel/head64.c @@ -45,38 +45,16 @@ static void __init copy_bootdata(char *real_mode_data) new_data = *(int *) (x86_boot_params + NEW_CL_POINTER); if (!new_data) { if (OLD_CL_MAGIC != * (u16 *) OLD_CL_MAGIC_ADDR) { - printk("so old bootloader that it does not support commandline?!\n"); return; } new_data = OLD_CL_BASE_ADDR + * (u16 *) OLD_CL_OFFSET; - printk("old bootloader convention, maybe loadlin?\n"); } command_line = (char *) ((u64)(new_data)); memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); - printk("Bootdata ok (command line is %s)\n", saved_command_line); -} - -static void __init setup_boot_cpu_data(void) -{ - unsigned int dummy, eax; - - /* get vendor info */ - cpuid(0, (unsigned int *)&boot_cpu_data.cpuid_level, - (unsigned int *)&boot_cpu_data.x86_vendor_id[0], - (unsigned int *)&boot_cpu_data.x86_vendor_id[8], - (unsigned int *)&boot_cpu_data.x86_vendor_id[4]); - - /* get cpu type */ - cpuid(1, &eax, &dummy, &dummy, - (unsigned int *) &boot_cpu_data.x86_capability); - boot_cpu_data.x86 = (eax >> 8) & 0xf; - boot_cpu_data.x86_model = (eax >> 4) & 0xf; - boot_cpu_data.x86_mask = eax & 0xf; } void __init x86_64_start_kernel(char * real_mode_data) { - char *s; int i; for (i = 0; i < 256; i++) @@ -84,10 +62,7 @@ void __init x86_64_start_kernel(char * real_mode_data) asm volatile("lidt %0" :: "m" (idt_descr)); clear_bss(); - /* - * This must be called really, really early: - */ - lockdep_init(); + early_printk("Kernel alive\n"); /* * switch to init_level4_pgt from boot_level4_pgt @@ -103,22 +78,5 @@ void __init x86_64_start_kernel(char * real_mode_data) #ifdef CONFIG_SMP cpu_set(0, cpu_online_map); #endif - s = strstr(saved_command_line, "earlyprintk="); - if (s != NULL) - setup_early_printk(strchr(s, '=') + 1); -#ifdef CONFIG_NUMA - s = strstr(saved_command_line, "numa="); - if (s != NULL) - numa_setup(s+5); -#endif -#ifdef CONFIG_X86_IO_APIC - if (strstr(saved_command_line, "disableapic")) - disable_apic = 1; -#endif - /* You need early console to see that */ - if (__pa_symbol(&_end) >= KERNEL_TEXT_SIZE) - panic("Kernel too big for kernel mapping\n"); - - setup_boot_cpu_data(); start_kernel(); } diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index 0434b1f8e3dd..2dd51f364ea2 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -55,7 +55,6 @@ */ BUILD_16_IRQS(0x0) -#ifdef CONFIG_X86_LOCAL_APIC /* * The IO-APIC gives us many more interrupt sources. Most of these * are unused but an SMP system is supposed to have enough memory ... @@ -75,8 +74,6 @@ BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_15_IRQS(0xe) #endif -#endif - #undef BUILD_16_IRQS #undef BUILD_15_IRQS #undef BI @@ -100,7 +97,6 @@ BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) void (*interrupt[NR_IRQS])(void) = { IRQLIST_16(0x0), -#ifdef CONFIG_X86_IO_APIC IRQLIST_16(0x1), IRQLIST_16(0x2), IRQLIST_16(0x3), IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), @@ -110,7 +106,6 @@ void (*interrupt[NR_IRQS])(void) = { , IRQLIST_15(0xe) #endif -#endif }; #undef IRQ @@ -128,6 +123,8 @@ void (*interrupt[NR_IRQS])(void) = { DEFINE_SPINLOCK(i8259A_lock); +static int i8259A_auto_eoi; + static void end_8259A_irq (unsigned int irq) { if (irq > 256) { @@ -341,6 +338,8 @@ void init_8259A(int auto_eoi) { unsigned long flags; + i8259A_auto_eoi = auto_eoi; + spin_lock_irqsave(&i8259A_lock, flags); outb(0xff, 0x21); /* mask all of 8259A-1 */ @@ -399,7 +398,7 @@ static void save_ELCR(char *trigger) static int i8259A_resume(struct sys_device *dev) { - init_8259A(0); + init_8259A(i8259A_auto_eoi); restore_ELCR(irq_trigger); return 0; } @@ -453,9 +452,7 @@ void __init init_ISA_irqs (void) { int i; -#ifdef CONFIG_X86_LOCAL_APIC init_bsp_APIC(); -#endif init_8259A(0); for (i = 0; i < NR_IRQS; i++) { @@ -581,14 +578,12 @@ void __init init_IRQ(void) set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); -#ifdef CONFIG_X86_LOCAL_APIC /* self generated IPI for local APIC timer */ set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); -#endif /* * Set the clock to HZ Hz, we already have a valid diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 924a4a332954..0491019d4c8d 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -48,7 +48,7 @@ int sis_apic_bug; /* not actually supported, dummy for compile */ static int no_timer_check; -int disable_timer_pin_1 __initdata; +static int disable_timer_pin_1 __initdata; int timer_over_8254 __initdata = 0; @@ -111,6 +111,33 @@ int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; FINAL; \ } +union entry_union { + struct { u32 w1, w2; }; + struct IO_APIC_route_entry entry; +}; + +static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + return eu.entry; +} + +static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + unsigned long flags; + union entry_union eu; + eu.entry = e; + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + #ifdef CONFIG_SMP static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) { @@ -196,13 +223,9 @@ static void unmask_IO_APIC_irq (unsigned int irq) static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; - unsigned long flags; /* Check delivery_mode to be sure we're not clearing an SMI pin */ - spin_lock_irqsave(&ioapic_lock, flags); - *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) return; /* @@ -210,10 +233,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) */ memset(&entry, 0, sizeof(entry)); entry.mask = 1; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0)); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry); } static void clear_IO_APIC (void) @@ -225,14 +245,6 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } -/* - * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to - * specific CPU-side IRQs. - */ - -#define MAX_PIRQS 8 -static int pirq_entries [MAX_PIRQS]; -static int pirqs_enabled; int skip_ioapic_setup; int ioapic_force; @@ -241,18 +253,17 @@ int ioapic_force; static int __init disable_ioapic_setup(char *str) { skip_ioapic_setup = 1; - return 1; + return 0; } +early_param("noapic", disable_ioapic_setup); -static int __init enable_ioapic_setup(char *str) +/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ +static int __init disable_timer_pin_setup(char *arg) { - ioapic_force = 1; - skip_ioapic_setup = 0; + disable_timer_pin_1 = 1; return 1; } - -__setup("noapic", disable_ioapic_setup); -__setup("apic", enable_ioapic_setup); +__setup("disable_timer_pin_1", disable_timer_pin_setup); static int __init setup_disable_8254_timer(char *s) { @@ -268,135 +279,6 @@ static int __init setup_enable_8254_timer(char *s) __setup("disable_8254_timer", setup_disable_8254_timer); __setup("enable_8254_timer", setup_enable_8254_timer); -#include <asm/pci-direct.h> -#include <linux/pci_ids.h> -#include <linux/pci.h> - - -#ifdef CONFIG_ACPI - -static int nvidia_hpet_detected __initdata; - -static int __init nvidia_hpet_check(unsigned long phys, unsigned long size) -{ - nvidia_hpet_detected = 1; - return 0; -} -#endif - -/* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC - off. Check for an Nvidia or VIA PCI bridge and turn it off. - Use pci direct infrastructure because this runs before the PCI subsystem. - - Can be overwritten with "apic" - - And another hack to disable the IOMMU on VIA chipsets. - - ... and others. Really should move this somewhere else. - - Kludge-O-Rama. */ -void __init check_ioapic(void) -{ - int num,slot,func; - /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { - u32 class; - u32 vendor; - u8 type; - class = read_pci_config(num,slot,func, - PCI_CLASS_REVISION); - if (class == 0xffffffff) - break; - - if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) - continue; - - vendor = read_pci_config(num, slot, func, - PCI_VENDOR_ID); - vendor &= 0xffff; - switch (vendor) { - case PCI_VENDOR_ID_VIA: -#ifdef CONFIG_IOMMU - if ((end_pfn > MAX_DMA32_PFN || - force_iommu) && - !iommu_aperture_allowed) { - printk(KERN_INFO - "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n"); - iommu_aperture_disabled = 1; - } -#endif - return; - case PCI_VENDOR_ID_NVIDIA: -#ifdef CONFIG_ACPI - /* - * All timer overrides on Nvidia are - * wrong unless HPET is enabled. - */ - nvidia_hpet_detected = 0; - acpi_table_parse(ACPI_HPET, - nvidia_hpet_check); - if (nvidia_hpet_detected == 0) { - acpi_skip_timer_override = 1; - printk(KERN_INFO "Nvidia board " - "detected. Ignoring ACPI " - "timer override.\n"); - } -#endif - /* RED-PEN skip them on mptables too? */ - return; - - /* This should be actually default, but - for 2.6.16 let's do it for ATI only where - it's really needed. */ - case PCI_VENDOR_ID_ATI: - if (timer_over_8254 == 1) { - timer_over_8254 = 0; - printk(KERN_INFO - "ATI board detected. Disabling timer routing over 8254.\n"); - } - return; - } - - - /* No multi-function device? */ - type = read_pci_config_byte(num,slot,func, - PCI_HEADER_TYPE); - if (!(type & 0x80)) - break; - } - } - } -} - -static int __init ioapic_pirq_setup(char *str) -{ - int i, max; - int ints[MAX_PIRQS+1]; - - get_options(str, ARRAY_SIZE(ints), ints); - - for (i = 0; i < MAX_PIRQS; i++) - pirq_entries[i] = -1; - - pirqs_enabled = 1; - apic_printk(APIC_VERBOSE, "PIRQ redirection, working around broken MP-BIOS.\n"); - max = MAX_PIRQS; - if (ints[0] < MAX_PIRQS) - max = ints[0]; - - for (i = 0; i < max; i++) { - apic_printk(APIC_VERBOSE, "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); - /* - * PIRQs are mapped upside down, usually. - */ - pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; - } - return 1; -} - -__setup("pirq=", ioapic_pirq_setup); /* * Find the IRQ entry number of a certain pin. @@ -425,9 +307,7 @@ static int __init find_isa_irq_pin(int irq, int type) for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].mpc_srcbus; - if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || - mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA) && + if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].mpc_irqtype == type) && (mp_irqs[i].mpc_srcbusirq == irq)) @@ -443,9 +323,7 @@ static int __init find_isa_irq_apic(int irq, int type) for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].mpc_srcbus; - if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || - mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA) && + if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].mpc_irqtype == type) && (mp_irqs[i].mpc_srcbusirq == irq)) break; @@ -485,7 +363,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; - if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && + if (!test_bit(lbus, mp_bus_not_pci) && !mp_irqs[i].mpc_irqtype && (bus == lbus) && (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { @@ -508,27 +386,6 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return best_guess; } -/* - * EISA Edge/Level control register, ELCR - */ -static int EISA_ELCR(unsigned int irq) -{ - if (irq < 16) { - unsigned int port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; - } - apic_printk(APIC_VERBOSE, "Broken MPtable reports ISA irq %d\n", irq); - return 0; -} - -/* EISA interrupts are always polarity zero and can be edge or level - * trigger depending on the ELCR value. If an interrupt is listed as - * EISA conforming in the MP table, that means its trigger type must - * be read in from the ELCR */ - -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) -#define default_EISA_polarity(idx) (0) - /* ISA interrupts are always polarity zero edge triggered, * when listed as conforming in the MP table. */ @@ -541,12 +398,6 @@ static int EISA_ELCR(unsigned int irq) #define default_PCI_trigger(idx) (1) #define default_PCI_polarity(idx) (1) -/* MCA interrupts are always polarity zero level triggered, - * when listed as conforming in the MP table. */ - -#define default_MCA_trigger(idx) (1) -#define default_MCA_polarity(idx) (0) - static int __init MPBIOS_polarity(int idx) { int bus = mp_irqs[idx].mpc_srcbus; @@ -558,38 +409,11 @@ static int __init MPBIOS_polarity(int idx) switch (mp_irqs[idx].mpc_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ - { - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - polarity = default_ISA_polarity(idx); - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - polarity = default_EISA_polarity(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - polarity = default_PCI_polarity(idx); - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - polarity = default_MCA_polarity(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - } + if (test_bit(bus, mp_bus_not_pci)) + polarity = default_ISA_polarity(idx); + else + polarity = default_PCI_polarity(idx); break; - } case 1: /* high active */ { polarity = 0; @@ -627,38 +451,11 @@ static int MPBIOS_trigger(int idx) switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ - { - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - trigger = default_ISA_trigger(idx); - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - trigger = default_PCI_trigger(idx); - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } + if (test_bit(bus, mp_bus_not_pci)) + trigger = default_ISA_trigger(idx); + else + trigger = default_PCI_trigger(idx); break; - } case 1: /* edge */ { trigger = 0; @@ -764,49 +561,17 @@ static int pin_2_irq(int idx, int apic, int pin) if (mp_irqs[idx].mpc_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - case MP_BUS_EISA: - case MP_BUS_MCA: - { - irq = mp_irqs[idx].mpc_srcbusirq; - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* - * PCI IRQs are mapped in order - */ - i = irq = 0; - while (i < apic) - irq += nr_ioapic_registers[i++]; - irq += pin; - irq = gsi_irq_sharing(irq); - break; - } - default: - { - printk(KERN_ERR "unknown bus type %d.\n",bus); - irq = 0; - break; - } - } - BUG_ON(irq >= NR_IRQS); - - /* - * PCI IRQ command line redirection. Yes, limits are hardcoded. - */ - if ((pin >= 16) && (pin <= 23)) { - if (pirq_entries[pin-16] != -1) { - if (!pirq_entries[pin-16]) { - apic_printk(APIC_VERBOSE, "disabling PIRQ%d\n", pin-16); - } else { - irq = pirq_entries[pin-16]; - apic_printk(APIC_VERBOSE, "using PIRQ%d -> IRQ %d\n", - pin-16, irq); - } - } + if (test_bit(bus, mp_bus_not_pci)) { + irq = mp_irqs[idx].mpc_srcbusirq; + } else { + /* + * PCI IRQs are mapped in order + */ + i = irq = 0; + while (i < apic) + irq += nr_ioapic_registers[i++]; + irq += pin; + irq = gsi_irq_sharing(irq); } BUG_ON(irq >= NR_IRQS); return irq; @@ -943,9 +708,9 @@ static void __init setup_IO_APIC_irqs(void) if (!apic && (irq < 16)) disable_8259A_irq(irq); } + ioapic_write_entry(apic, pin, entry); + spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -1083,10 +848,7 @@ void __apicdebuginit print_IO_APIC(void) for (i = 0; i <= reg_01.bits.entries; i++) { struct IO_APIC_route_entry entry; - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2); - *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry = ioapic_read_entry(apic, i); printk(KERN_DEBUG " %02x %03X %02X ", i, @@ -1281,9 +1043,6 @@ static void __init enable_IO_APIC(void) irq_2_pin[i].pin = -1; irq_2_pin[i].next = 0; } - if (!pirqs_enabled) - for (i = 0; i < MAX_PIRQS; i++) - pirq_entries[i] = -1; /* * The number of IO-APIC IRQ registers (== #pins): @@ -1299,11 +1058,7 @@ static void __init enable_IO_APIC(void) /* See if any of the pins is in ExtINT mode */ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { struct IO_APIC_route_entry entry; - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); - + entry = ioapic_read_entry(apic, pin); /* If the interrupt line is enabled and in ExtInt mode * I have found the pin where the i8259 is connected. @@ -1355,7 +1110,6 @@ void disable_IO_APIC(void) */ if (ioapic_i8259.pin != -1) { struct IO_APIC_route_entry entry; - unsigned long flags; memset(&entry, 0, sizeof(entry)); entry.mask = 0; /* Enabled */ @@ -1372,84 +1126,13 @@ void disable_IO_APIC(void) /* * Add it to the IO-APIC irq-routing table: */ - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin, - *(((int *)&entry)+1)); - io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin, - *(((int *)&entry)+0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); } disconnect_bsp_APIC(ioapic_i8259.pin != -1); } /* - * function to set the IO-APIC physical IDs based on the - * values stored in the MPC table. - * - * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 - */ - -static void __init setup_ioapic_ids_from_mpc (void) -{ - union IO_APIC_reg_00 reg_00; - int apic; - int i; - unsigned char old_id; - unsigned long flags; - - /* - * Set the IOAPIC ID to the value stored in the MPC table. - */ - for (apic = 0; apic < nr_ioapics; apic++) { - - /* Read the register 0 value */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - old_id = mp_ioapics[apic].mpc_apicid; - - - printk(KERN_INFO "Using IO-APIC %d\n", mp_ioapics[apic].mpc_apicid); - - - /* - * We need to adjust the IRQ routing table - * if the ID changed. - */ - if (old_id != mp_ioapics[apic].mpc_apicid) - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_dstapic == old_id) - mp_irqs[i].mpc_dstapic - = mp_ioapics[apic].mpc_apicid; - - /* - * Read the right value from the MPC table and - * write it into the ID register. - */ - apic_printk(APIC_VERBOSE,KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mpc_apicid); - - reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0, reg_00.raw); - spin_unlock_irqrestore(&ioapic_lock, flags); - - /* - * Sanity check - */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) - printk("could not set ID!\n"); - else - apic_printk(APIC_VERBOSE," ok.\n"); - } -} - -/* * There is a nasty bug in some older SMP boards, their mptable lies * about the timer IRQ. We do the following to work around the situation: * @@ -1964,11 +1647,6 @@ void __init setup_IO_APIC(void) apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); - /* - * Set up the IO-APIC IRQ routing table. - */ - if (!acpi_ioapic) - setup_ioapic_ids_from_mpc(); sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); @@ -1987,17 +1665,12 @@ static int ioapic_suspend(struct sys_device *dev, pm_message_t state) { struct IO_APIC_route_entry *entry; struct sysfs_ioapic_data *data; - unsigned long flags; int i; data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; - spin_lock_irqsave(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { - *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i); - *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i); - } - spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) + *entry = ioapic_read_entry(dev->id, i); return 0; } @@ -2019,11 +1692,9 @@ static int ioapic_resume(struct sys_device *dev) reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; io_apic_write(dev->id, 0, reg_00.raw); } - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { - io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1)); - io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0)); - } spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) + ioapic_write_entry(dev->id, i, entry[i]); return 0; } @@ -2077,19 +1748,6 @@ device_initcall(ioapic_init_sysfs); #define IO_APIC_MAX_ID 0xFE -int __init io_apic_get_version (int ioapic) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(ioapic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return reg_01.bits.version; -} - - int __init io_apic_get_redir_entries (int ioapic) { union IO_APIC_reg_01 reg_01; @@ -2148,10 +1806,10 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p if (!ioapic && (irq < 16)) disable_8259A_irq(irq); + ioapic_write_entry(ioapic, pin, entry); + spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); - set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); return 0; diff --git a/arch/x86_64/kernel/ioport.c b/arch/x86_64/kernel/ioport.c index b81614970ecc..fe063d3cfe42 100644 --- a/arch/x86_64/kernel/ioport.c +++ b/arch/x86_64/kernel/ioport.c @@ -56,6 +56,7 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) memset(bitmap, 0xff, IO_BITMAP_BYTES); t->io_bitmap_ptr = bitmap; + set_thread_flag(TIF_IO_BITMAP); } /* diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index 5221a53e90c1..b3677e6ccc6e 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -20,11 +20,6 @@ #include <asm/idle.h> atomic_t irq_err_count; -#ifdef CONFIG_X86_IO_APIC -#ifdef APIC_MISMATCH_DEBUG -atomic_t irq_mis_count; -#endif -#endif #ifdef CONFIG_DEBUG_STACKOVERFLOW /* @@ -92,18 +87,11 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count); seq_putc(p, '\n'); -#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "LOC: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs); seq_putc(p, '\n'); -#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); -#ifdef CONFIG_X86_IO_APIC -#ifdef APIC_MISMATCH_DEBUG - seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); -#endif -#endif } return 0; } diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c index 106076b370fc..0497e3bd5bff 100644 --- a/arch/x86_64/kernel/machine_kexec.c +++ b/arch/x86_64/kernel/machine_kexec.c @@ -15,6 +15,15 @@ #include <asm/mmu_context.h> #include <asm/io.h> +#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) +static u64 kexec_pgd[512] PAGE_ALIGNED; +static u64 kexec_pud0[512] PAGE_ALIGNED; +static u64 kexec_pmd0[512] PAGE_ALIGNED; +static u64 kexec_pte0[512] PAGE_ALIGNED; +static u64 kexec_pud1[512] PAGE_ALIGNED; +static u64 kexec_pmd1[512] PAGE_ALIGNED; +static u64 kexec_pte1[512] PAGE_ALIGNED; + static void init_level2_page(pmd_t *level2p, unsigned long addr) { unsigned long end_addr; @@ -144,32 +153,19 @@ static void load_segments(void) ); } -typedef NORET_TYPE void (*relocate_new_kernel_t)(unsigned long indirection_page, - unsigned long control_code_buffer, - unsigned long start_address, - unsigned long pgtable) ATTRIB_NORET; - -extern const unsigned char relocate_new_kernel[]; -extern const unsigned long relocate_new_kernel_size; - int machine_kexec_prepare(struct kimage *image) { - unsigned long start_pgtable, control_code_buffer; + unsigned long start_pgtable; int result; /* Calculate the offsets */ start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT; - control_code_buffer = start_pgtable + PAGE_SIZE; /* Setup the identity mapped 64bit page table */ result = init_pgtable(image, start_pgtable); if (result) return result; - /* Place the code in the reboot code buffer */ - memcpy(__va(control_code_buffer), relocate_new_kernel, - relocate_new_kernel_size); - return 0; } @@ -184,28 +180,34 @@ void machine_kexec_cleanup(struct kimage *image) */ NORET_TYPE void machine_kexec(struct kimage *image) { - unsigned long page_list; - unsigned long control_code_buffer; - unsigned long start_pgtable; - relocate_new_kernel_t rnk; + unsigned long page_list[PAGES_NR]; + void *control_page; /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); - /* Calculate the offsets */ - page_list = image->head; - start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT; - control_code_buffer = start_pgtable + PAGE_SIZE; - - /* Set the low half of the page table to my identity mapped - * page table for kexec. Leave the high half pointing at the - * kernel pages. Don't bother to flush the global pages - * as that will happen when I fully switch to my identity mapped - * page table anyway. - */ - memcpy(__va(read_cr3()), __va(start_pgtable), PAGE_SIZE/2); - __flush_tlb(); - + control_page = page_address(image->control_code_page) + PAGE_SIZE; + memcpy(control_page, relocate_kernel, PAGE_SIZE); + + page_list[PA_CONTROL_PAGE] = __pa(control_page); + page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; + page_list[PA_PGD] = __pa(kexec_pgd); + page_list[VA_PGD] = (unsigned long)kexec_pgd; + page_list[PA_PUD_0] = __pa(kexec_pud0); + page_list[VA_PUD_0] = (unsigned long)kexec_pud0; + page_list[PA_PMD_0] = __pa(kexec_pmd0); + page_list[VA_PMD_0] = (unsigned long)kexec_pmd0; + page_list[PA_PTE_0] = __pa(kexec_pte0); + page_list[VA_PTE_0] = (unsigned long)kexec_pte0; + page_list[PA_PUD_1] = __pa(kexec_pud1); + page_list[VA_PUD_1] = (unsigned long)kexec_pud1; + page_list[PA_PMD_1] = __pa(kexec_pmd1); + page_list[VA_PMD_1] = (unsigned long)kexec_pmd1; + page_list[PA_PTE_1] = __pa(kexec_pte1); + page_list[VA_PTE_1] = (unsigned long)kexec_pte1; + + page_list[PA_TABLE_PAGE] = + (unsigned long)__pa(page_address(image->control_code_page)); /* The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is @@ -222,7 +224,36 @@ NORET_TYPE void machine_kexec(struct kimage *image) */ set_gdt(phys_to_virt(0),0); set_idt(phys_to_virt(0),0); + /* now call it */ - rnk = (relocate_new_kernel_t) control_code_buffer; - (*rnk)(page_list, control_code_buffer, image->start, start_pgtable); + relocate_kernel((unsigned long)image->head, (unsigned long)page_list, + image->start); } + +/* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never set's it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ +static int __init setup_crashkernel(char *arg) +{ + unsigned long size, base; + char *p; + if (!arg) + return -EINVAL; + size = memparse(arg, &p); + if (arg == p) + return -EINVAL; + if (*p == '@') { + base = memparse(p+1, &p); + /* FIXME: Do I want a sanity check to validate the + * memory range? Yes you do, but it's too early for + * e820 -AK */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + return 0; +} +early_param("crashkernel", setup_crashkernel); + diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 4e017fb30fb3..bbea88801d88 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -182,7 +182,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) goto out2; memset(&m, 0, sizeof(struct mce)); - m.cpu = safe_smp_processor_id(); + m.cpu = smp_processor_id(); rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus); if (!(m.mcgstatus & MCG_STATUS_RIPV)) kill_it = 1; @@ -274,6 +274,33 @@ void do_machine_check(struct pt_regs * regs, long error_code) atomic_dec(&mce_entry); } +#ifdef CONFIG_X86_MCE_INTEL +/*** + * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog + * @cpu: The CPU on which the event occured. + * @status: Event status information + * + * This function should be called by the thermal interrupt after the + * event has been processed and the decision was made to log the event + * further. + * + * The status parameter will be saved to the 'status' field of 'struct mce' + * and historically has been the register value of the + * MSR_IA32_THERMAL_STATUS (Intel) msr. + */ +void mce_log_therm_throt_event(unsigned int cpu, __u64 status) +{ + struct mce m; + + memset(&m, 0, sizeof(m)); + m.cpu = cpu; + m.bank = MCE_THERMAL_BANK; + m.status = status; + rdtscll(m.tsc); + mce_log(&m); +} +#endif /* CONFIG_X86_MCE_INTEL */ + /* * Periodic polling timer for "silent" machine check errors. */ diff --git a/arch/x86_64/kernel/mce_intel.c b/arch/x86_64/kernel/mce_intel.c index 8f533d2c40cb..6551505d8a2c 100644 --- a/arch/x86_64/kernel/mce_intel.c +++ b/arch/x86_64/kernel/mce_intel.c @@ -11,36 +11,21 @@ #include <asm/mce.h> #include <asm/hw_irq.h> #include <asm/idle.h> - -static DEFINE_PER_CPU(unsigned long, next_check); +#include <asm/therm_throt.h> asmlinkage void smp_thermal_interrupt(void) { - struct mce m; + __u64 msr_val; ack_APIC_irq(); exit_idle(); irq_enter(); - if (time_before(jiffies, __get_cpu_var(next_check))) - goto done; - - __get_cpu_var(next_check) = jiffies + HZ*300; - memset(&m, 0, sizeof(m)); - m.cpu = smp_processor_id(); - m.bank = MCE_THERMAL_BANK; - rdtscll(m.tsc); - rdmsrl(MSR_IA32_THERM_STATUS, m.status); - if (m.status & 0x1) { - printk(KERN_EMERG - "CPU%d: Temperature above threshold, cpu clock throttled\n", m.cpu); - add_taint(TAINT_MACHINE_CHECK); - } else { - printk(KERN_EMERG "CPU%d: Temperature/speed normal\n", m.cpu); - } - mce_log(&m); -done: + rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + if (therm_throt_process(msr_val & 1)) + mce_log_therm_throt_event(smp_processor_id(), msr_val); + irq_exit(); } @@ -92,6 +77,9 @@ static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c) apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", cpu, tm2 ? "TM2" : "TM1"); + + /* enable thermal throttle processing */ + atomic_set(&therm_throt_en, 1); return; } diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index a1ab4197f8a1..20e88f4b564b 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -41,8 +41,7 @@ int acpi_found_madt; * Various Linux-internal data structures created from the * MP-table. */ -unsigned char apic_version [MAX_APICS]; -unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; static int mp_current_pci_id = 0; @@ -56,7 +55,6 @@ struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; int mp_irq_entries; int nr_ioapics; -int pic_mode; unsigned long mp_lapic_addr = 0; @@ -71,19 +69,6 @@ unsigned disabled_cpus __initdata; /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; -/* ACPI MADT entry parsing functions */ -#ifdef CONFIG_ACPI -extern struct acpi_boot_flags acpi_boot; -#ifdef CONFIG_X86_LOCAL_APIC -extern int acpi_parse_lapic (acpi_table_entry_header *header); -extern int acpi_parse_lapic_addr_ovr (acpi_table_entry_header *header); -extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header); -#endif /*CONFIG_X86_LOCAL_APIC*/ -#ifdef CONFIG_X86_IO_APIC -extern int acpi_parse_ioapic (acpi_table_entry_header *header); -#endif /*CONFIG_X86_IO_APIC*/ -#endif /*CONFIG_ACPI*/ - u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -108,24 +93,20 @@ static int __init mpf_checksum(unsigned char *mp, int len) static void __cpuinit MP_processor_info (struct mpc_config_processor *m) { int cpu; - unsigned char ver; cpumask_t tmp_map; + char *bootup_cpu = ""; if (!(m->mpc_cpuflag & CPU_ENABLED)) { disabled_cpus++; return; } - - printk(KERN_INFO "Processor #%d %d:%d APIC version %d\n", - m->mpc_apicid, - (m->mpc_cpufeature & CPU_FAMILY_MASK)>>8, - (m->mpc_cpufeature & CPU_MODEL_MASK)>>4, - m->mpc_apicver); - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - Dprintk(" Bootup CPU\n"); + bootup_cpu = " (Bootup-CPU)"; boot_cpu_id = m->mpc_apicid; } + + printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); + if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." " Processor ignored.\n", NR_CPUS); @@ -136,24 +117,7 @@ static void __cpuinit MP_processor_info (struct mpc_config_processor *m) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); -#if MAX_APICS < 255 - if ((int)m->mpc_apicid > MAX_APICS) { - printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", - m->mpc_apicid, MAX_APICS); - return; - } -#endif - ver = m->mpc_apicver; - physid_set(m->mpc_apicid, phys_cpu_present_map); - /* - * Validate version - */ - if (ver == 0x0) { - printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid); - ver = 0x10; - } - apic_version[m->mpc_apicid] = ver; if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { /* * bios_cpu_apicid is required to have processors listed @@ -178,15 +142,11 @@ static void __init MP_bus_info (struct mpc_config_bus *m) Dprintk("Bus #%d is %s\n", m->mpc_busid, str); if (strncmp(str, "ISA", 3) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; - } else if (strncmp(str, "EISA", 4) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA; + set_bit(m->mpc_busid, mp_bus_not_pci); } else if (strncmp(str, "PCI", 3) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; + clear_bit(m->mpc_busid, mp_bus_not_pci); mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; mp_current_pci_id++; - } else if (strncmp(str, "MCA", 3) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; } else { printk(KERN_ERR "Unknown bustype %s\n", str); } @@ -197,8 +157,8 @@ static void __init MP_ioapic_info (struct mpc_config_ioapic *m) if (!(m->mpc_flags & MPC_APIC_USABLE)) return; - printk("I/O APIC #%d Version %d at 0x%X.\n", - m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr); + printk("I/O APIC #%d at 0x%X.\n", + m->mpc_apicid, m->mpc_apicaddr); if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "Max # of I/O APICs (%d) exceeded (found %d).\n", MAX_IO_APICS, nr_ioapics); @@ -232,19 +192,6 @@ static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); - /* - * Well it seems all SMP boards in existence - * use ExtINT/LVT1 == LINT0 and - * NMI/LVT2 == LINT1 - the following check - * will show us if this assumptions is false. - * Until then we do not have to add baggage. - */ - if ((m->mpc_irqtype == mp_ExtINT) && - (m->mpc_destapiclint != 0)) - BUG(); - if ((m->mpc_irqtype == mp_NMI) && - (m->mpc_destapiclint != 1)) - BUG(); } /* @@ -258,7 +205,7 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) unsigned char *mpt=((unsigned char *)mpc)+count; if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { - printk("SMP mptable: bad signature [%c%c%c%c]!\n", + printk("MPTABLE: bad signature [%c%c%c%c]!\n", mpc->mpc_signature[0], mpc->mpc_signature[1], mpc->mpc_signature[2], @@ -266,31 +213,31 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) return 0; } if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { - printk("SMP mptable: checksum error!\n"); + printk("MPTABLE: checksum error!\n"); return 0; } if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { - printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n", + printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", mpc->mpc_spec); return 0; } if (!mpc->mpc_lapic) { - printk(KERN_ERR "SMP mptable: null local APIC address!\n"); + printk(KERN_ERR "MPTABLE: null local APIC address!\n"); return 0; } memcpy(str,mpc->mpc_oem,8); - str[8]=0; - printk(KERN_INFO "OEM ID: %s ",str); + str[8] = 0; + printk(KERN_INFO "MPTABLE: OEM ID: %s ",str); memcpy(str,mpc->mpc_productid,12); - str[12]=0; - printk("Product ID: %s ",str); + str[12] = 0; + printk("MPTABLE: Product ID: %s ",str); - printk("APIC at: 0x%X\n",mpc->mpc_lapic); + printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic); /* save the local APIC address, it might be non-default */ if (!acpi_lapic) - mp_lapic_addr = mpc->mpc_lapic; + mp_lapic_addr = mpc->mpc_lapic; /* * Now process the configuration blocks. @@ -302,7 +249,7 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) struct mpc_config_processor *m= (struct mpc_config_processor *)mpt; if (!acpi_lapic) - MP_processor_info(m); + MP_processor_info(m); mpt += sizeof(*m); count += sizeof(*m); break; @@ -321,8 +268,8 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) struct mpc_config_ioapic *m= (struct mpc_config_ioapic *)mpt; MP_ioapic_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); + mpt += sizeof(*m); + count += sizeof(*m); break; } case MP_INTSRC: @@ -331,8 +278,8 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) (struct mpc_config_intsrc *)mpt; MP_intsrc_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); + mpt += sizeof(*m); + count += sizeof(*m); break; } case MP_LINTSRC: @@ -340,15 +287,15 @@ static int __init smp_read_mpc(struct mp_config_table *mpc) struct mpc_config_lintsrc *m= (struct mpc_config_lintsrc *)mpt; MP_lintsrc_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); + mpt += sizeof(*m); + count += sizeof(*m); break; } } } clustered_apic_check(); if (!num_processors) - printk(KERN_ERR "SMP mptable: no processors registered!\n"); + printk(KERN_ERR "MPTABLE: no processors registered!\n"); return num_processors; } @@ -444,13 +391,10 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) * 2 CPUs, numbered 0 & 1. */ processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_apicver = 0; processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | - boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_cpufeature = 0; + processor.mpc_featureflag = 0; processor.mpc_reserved[0] = 0; processor.mpc_reserved[1] = 0; for (i = 0; i < 2; i++) { @@ -469,14 +413,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) case 5: memcpy(bus.mpc_bustype, "ISA ", 6); break; - case 2: - case 6: - case 3: - memcpy(bus.mpc_bustype, "EISA ", 6); - break; - case 4: - case 7: - memcpy(bus.mpc_bustype, "MCA ", 6); } MP_bus_info(&bus); if (mpc_default_type > 4) { @@ -487,7 +423,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) ioapic.mpc_type = MP_IOAPIC; ioapic.mpc_apicid = 2; - ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + ioapic.mpc_apicver = 0; ioapic.mpc_flags = MPC_APIC_USABLE; ioapic.mpc_apicaddr = 0xFEC00000; MP_ioapic_info(&ioapic); @@ -530,13 +466,6 @@ void __init get_smp_config (void) printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); - if (mpf->mpf_feature2 & (1<<7)) { - printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); - pic_mode = 1; - } else { - printk(KERN_INFO " Virtual Wire compatibility mode.\n"); - pic_mode = 0; - } /* * Now see if we need to read further. @@ -616,7 +545,7 @@ static int __init smp_scan_config (unsigned long base, unsigned long length) return 0; } -void __init find_intel_smp (void) +void __init find_smp_config(void) { unsigned int address; @@ -633,9 +562,7 @@ void __init find_intel_smp (void) smp_scan_config(0xF0000,0x10000)) return; /* - * If it is an SMP machine we should know now, unless the - * configuration is in an EISA/MCA bus machine with an - * extended bios data area. + * If it is an SMP machine we should know now. * * there is a real-mode segmented pointer pointing to the * 4K EBDA area at 0x40E, calculate and scan it here. @@ -656,69 +583,41 @@ void __init find_intel_smp (void) printk(KERN_INFO "No mptable found.\n"); } -/* - * - Intel MP Configuration Table - */ -void __init find_smp_config (void) -{ -#ifdef CONFIG_X86_LOCAL_APIC - find_intel_smp(); -#endif -} - - /* -------------------------------------------------------------------------- ACPI-based MP Configuration -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI -void __init mp_register_lapic_address ( - u64 address) +void __init mp_register_lapic_address(u64 address) { mp_lapic_addr = (unsigned long) address; - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - if (boot_cpu_id == -1U) boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); - - Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid); } - -void __cpuinit mp_register_lapic ( - u8 id, - u8 enabled) +void __cpuinit mp_register_lapic (u8 id, u8 enabled) { struct mpc_config_processor processor; int boot_cpu = 0; - if (id >= MAX_APICS) { - printk(KERN_WARNING "Processor #%d invalid (max %d)\n", - id, MAX_APICS); - return; - } - - if (id == boot_cpu_physical_apicid) + if (id == boot_cpu_id) boot_cpu = 1; processor.mpc_type = MP_PROCESSOR; processor.mpc_apicid = id; - processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR)); + processor.mpc_apicver = 0; processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_cpufeature = 0; + processor.mpc_featureflag = 0; processor.mpc_reserved[0] = 0; processor.mpc_reserved[1] = 0; MP_processor_info(&processor); } -#ifdef CONFIG_X86_IO_APIC - #define MP_ISA_BUS 0 #define MP_MAX_IOAPIC_PIN 127 @@ -729,11 +628,9 @@ static struct mp_ioapic_routing { u32 pin_programmed[4]; } mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic ( - int gsi) +static int mp_find_ioapic(int gsi) { - int i = 0; + int i = 0; /* Find the IOAPIC that manages this GSI. */ for (i = 0; i < nr_ioapics; i++) { @@ -743,17 +640,12 @@ static int mp_find_ioapic ( } printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; } - -void __init mp_register_ioapic ( - u8 id, - u32 address, - u32 gsi_base) +void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) { - int idx = 0; + int idx = 0; if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " @@ -774,7 +666,7 @@ void __init mp_register_ioapic ( set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); mp_ioapics[idx].mpc_apicid = id; - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); + mp_ioapics[idx].mpc_apicver = 0; /* * Build basic IRQ lookup table to facilitate gsi->io_apic lookups @@ -785,21 +677,15 @@ void __init mp_register_ioapic ( mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, " "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapics[idx].mpc_apicaddr, mp_ioapic_routing[idx].gsi_start, mp_ioapic_routing[idx].gsi_end); - - return; } - -void __init mp_override_legacy_irq ( - u8 bus_irq, - u8 polarity, - u8 trigger, - u32 gsi) +void __init +mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { struct mpc_config_intsrc intsrc; int ioapic = -1; @@ -837,22 +723,18 @@ void __init mp_override_legacy_irq ( mp_irqs[mp_irq_entries] = intsrc; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!\n"); - - return; } - -void __init mp_config_acpi_legacy_irqs (void) +void __init mp_config_acpi_legacy_irqs(void) { struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; + int i = 0; + int ioapic = -1; /* * Fabricate the legacy ISA bus (bus #31). */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + set_bit(MP_ISA_BUS, mp_bus_not_pci); /* * Locate the IOAPIC that manages the ISA IRQs (0-15). @@ -905,24 +787,22 @@ void __init mp_config_acpi_legacy_irqs (void) if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!\n"); } - - return; } #define MAX_GSI_NUM 4096 int mp_register_gsi(u32 gsi, int triggering, int polarity) { - int ioapic = -1; - int ioapic_pin = 0; - int idx, bit = 0; - static int pci_irq = 16; + int ioapic = -1; + int ioapic_pin = 0; + int idx, bit = 0; + static int pci_irq = 16; /* * Mapping between Global System Interrupts, which * represent all possible interrupts, to the IRQs * assigned to actual devices. */ - static int gsi_to_irq[MAX_GSI_NUM]; + static int gsi_to_irq[MAX_GSI_NUM]; if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; @@ -996,6 +876,4 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) polarity == ACPI_ACTIVE_HIGH ? 0 : 1); return gsi; } - -#endif /*CONFIG_X86_IO_APIC*/ #endif /*CONFIG_ACPI*/ diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 5baa0c726e97..4d6fb047952e 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -28,71 +28,138 @@ #include <asm/mce.h> #include <asm/intel_arch_perfmon.h> -/* - * lapic_nmi_owner tracks the ownership of the lapic NMI hardware: - * - it may be reserved by some other driver, or not - * - when not reserved by some other driver, it may be used for - * the NMI watchdog, or not - * - * This is maintained separately from nmi_active because the NMI - * watchdog may also be driven from the I/O APIC timer. +/* perfctr_nmi_owner tracks the ownership of the perfctr registers: + * evtsel_nmi_owner tracks the ownership of the event selection + * - different performance counters/ event selection may be reserved for + * different subsystems this reservation system just tries to coordinate + * things a little */ -static DEFINE_SPINLOCK(lapic_nmi_owner_lock); -static unsigned int lapic_nmi_owner; -#define LAPIC_NMI_WATCHDOG (1<<0) -#define LAPIC_NMI_RESERVED (1<<1) +static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner); +static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[2]); + +/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's + * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now) + */ +#define NMI_MAX_COUNTER_BITS 66 /* nmi_active: - * +1: the lapic NMI watchdog is active, but can be disabled - * 0: the lapic NMI watchdog has not been set up, and cannot + * >0: the lapic NMI watchdog is active, but can be disabled + * <0: the lapic NMI watchdog has not been set up, and cannot * be enabled - * -1: the lapic NMI watchdog is disabled, but can be enabled + * 0: the lapic NMI watchdog is disabled, but can be enabled */ -int nmi_active; /* oprofile uses this */ +atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ int panic_on_timeout; unsigned int nmi_watchdog = NMI_DEFAULT; static unsigned int nmi_hz = HZ; -static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ -static unsigned int nmi_p4_cccr_val; -/* Note that these events don't tick when the CPU idles. This means - the frequency varies with CPU load. */ +struct nmi_watchdog_ctlblk { + int enabled; + u64 check_bit; + unsigned int cccr_msr; + unsigned int perfctr_msr; /* the MSR to reset in NMI handler */ + unsigned int evntsel_msr; /* the MSR to select the events to handle */ +}; +static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk); -#define K7_EVNTSEL_ENABLE (1 << 22) -#define K7_EVNTSEL_INT (1 << 20) -#define K7_EVNTSEL_OS (1 << 17) -#define K7_EVNTSEL_USR (1 << 16) -#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 -#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING +/* local prototypes */ +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); -#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL -#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK +/* converts an msr to an appropriate reservation bit */ +static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) +{ + /* returns the bit offset of the performance counter register */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return (msr - MSR_K7_PERFCTR0); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return (msr - MSR_ARCH_PERFMON_PERFCTR0); + else + return (msr - MSR_P4_BPU_PERFCTR0); + } + return 0; +} -#define MSR_P4_MISC_ENABLE 0x1A0 -#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) -#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12) -#define MSR_P4_PERFCTR0 0x300 -#define MSR_P4_CCCR0 0x360 -#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) -#define P4_ESCR_OS (1<<3) -#define P4_ESCR_USR (1<<2) -#define P4_CCCR_OVF_PMI0 (1<<26) -#define P4_CCCR_OVF_PMI1 (1<<27) -#define P4_CCCR_THRESHOLD(N) ((N)<<20) -#define P4_CCCR_COMPLEMENT (1<<19) -#define P4_CCCR_COMPARE (1<<18) -#define P4_CCCR_REQUIRED (3<<16) -#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) -#define P4_CCCR_ENABLE (1<<12) -/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter - CRU_ESCR0 (with any non-null event selector) through a complemented - max threshold. [IA32-Vol3, Section 14.9.9] */ -#define MSR_P4_IQ_COUNTER0 0x30C -#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR) -#define P4_NMI_IQ_CCCR0 \ - (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ - P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) +/* converts an msr to an appropriate reservation bit */ +static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) +{ + /* returns the bit offset of the event selection register */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return (msr - MSR_K7_EVNTSEL0); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return (msr - MSR_ARCH_PERFMON_EVENTSEL0); + else + return (msr - MSR_P4_BSU_ESCR0); + } + return 0; +} + +/* checks for a bit availability (hack for oprofile) */ +int avail_to_resrv_perfctr_nmi_bit(unsigned int counter) +{ + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner))); +} + +/* checks the an msr for availability */ +int avail_to_resrv_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner))); +} + +int reserve_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner))) + return 1; + return 0; +} + +void release_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner)); +} + +int reserve_evntsel_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_evntsel_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner))) + return 1; + return 0; +} + +void release_evntsel_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_evntsel_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner)); +} static __cpuinit inline int nmi_known_cpu(void) { @@ -109,7 +176,7 @@ static __cpuinit inline int nmi_known_cpu(void) } /* Run after command line and cpu_init init, but before all other checks */ -void __cpuinit nmi_watchdog_default(void) +void nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; @@ -145,6 +212,12 @@ int __init check_nmi_watchdog (void) int *counts; int cpu; + if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT)) + return 0; + + if (!atomic_read(&nmi_active)) + return 0; + counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!counts) return -1; @@ -162,26 +235,43 @@ int __init check_nmi_watchdog (void) mdelay((10*1000)/nmi_hz); // wait 10 ticks for_each_online_cpu(cpu) { + if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled) + continue; if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) { - endflag = 1; printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", cpu, counts[cpu], cpu_pda(cpu)->__nmi_count); - nmi_active = 0; - lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG; - nmi_perfctr_msr = 0; - kfree(counts); - return -1; + per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0; + atomic_dec(&nmi_active); } } + if (!atomic_read(&nmi_active)) { + kfree(counts); + atomic_set(&nmi_active, -1); + return -1; + } endflag = 1; printk("OK.\n"); /* now that we know it works we can reduce NMI frequency to something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) + if (nmi_watchdog == NMI_LOCAL_APIC) { + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + nmi_hz = 1; + /* + * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && + ((u64)cpu_khz * 1000) > 0x7fffffffULL) { + nmi_hz = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; + } + } kfree(counts); return 0; @@ -201,91 +291,65 @@ int __init setup_nmi_watchdog(char *str) get_option(&str, &nmi); - if (nmi >= NMI_INVALID) + if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) return 0; + + if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0)) + return 0; /* no lapic support */ nmi_watchdog = nmi; return 1; } __setup("nmi_watchdog=", setup_nmi_watchdog); -static void disable_intel_arch_watchdog(void); - static void disable_lapic_nmi_watchdog(void) { - if (nmi_active <= 0) + BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); + + if (atomic_read(&nmi_active) <= 0) return; - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - wrmsr(MSR_K7_EVNTSEL0, 0, 0); - break; - case X86_VENDOR_INTEL: - if (boot_cpu_data.x86 == 15) { - wrmsr(MSR_P4_IQ_CCCR0, 0, 0); - wrmsr(MSR_P4_CRU_ESCR0, 0, 0); - } else if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { - disable_intel_arch_watchdog(); - } - break; - } - nmi_active = -1; - /* tell do_nmi() and others that we're not active any more */ - nmi_watchdog = 0; -} -static void enable_lapic_nmi_watchdog(void) -{ - if (nmi_active < 0) { - nmi_watchdog = NMI_LOCAL_APIC; - touch_nmi_watchdog(); - setup_apic_nmi_watchdog(); - } + on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); + + BUG_ON(atomic_read(&nmi_active) != 0); } -int reserve_lapic_nmi(void) +static void enable_lapic_nmi_watchdog(void) { - unsigned int old_owner; + BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); - spin_lock(&lapic_nmi_owner_lock); - old_owner = lapic_nmi_owner; - lapic_nmi_owner |= LAPIC_NMI_RESERVED; - spin_unlock(&lapic_nmi_owner_lock); - if (old_owner & LAPIC_NMI_RESERVED) - return -EBUSY; - if (old_owner & LAPIC_NMI_WATCHDOG) - disable_lapic_nmi_watchdog(); - return 0; -} + /* are we already enabled */ + if (atomic_read(&nmi_active) != 0) + return; -void release_lapic_nmi(void) -{ - unsigned int new_owner; + /* are we lapic aware */ + if (nmi_known_cpu() <= 0) + return; - spin_lock(&lapic_nmi_owner_lock); - new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED; - lapic_nmi_owner = new_owner; - spin_unlock(&lapic_nmi_owner_lock); - if (new_owner & LAPIC_NMI_WATCHDOG) - enable_lapic_nmi_watchdog(); + on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); + touch_nmi_watchdog(); } void disable_timer_nmi_watchdog(void) { - if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0)) + BUG_ON(nmi_watchdog != NMI_IO_APIC); + + if (atomic_read(&nmi_active) <= 0) return; disable_irq(0); - unset_nmi_callback(); - nmi_active = -1; - nmi_watchdog = NMI_NONE; + on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); + + BUG_ON(atomic_read(&nmi_active) != 0); } void enable_timer_nmi_watchdog(void) { - if (nmi_active < 0) { - nmi_watchdog = NMI_IO_APIC; + BUG_ON(nmi_watchdog != NMI_IO_APIC); + + if (atomic_read(&nmi_active) == 0) { touch_nmi_watchdog(); - nmi_active = 1; + on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); enable_irq(0); } } @@ -296,15 +360,20 @@ static int nmi_pm_active; /* nmi_active before suspend */ static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) { - nmi_pm_active = nmi_active; - disable_lapic_nmi_watchdog(); + /* only CPU0 goes here, other CPUs should be offline */ + nmi_pm_active = atomic_read(&nmi_active); + stop_apic_nmi_watchdog(NULL); + BUG_ON(atomic_read(&nmi_active) != 0); return 0; } static int lapic_nmi_resume(struct sys_device *dev) { - if (nmi_pm_active > 0) - enable_lapic_nmi_watchdog(); + /* only CPU0 goes here, other CPUs should be offline */ + if (nmi_pm_active > 0) { + setup_apic_nmi_watchdog(NULL); + touch_nmi_watchdog(); + } return 0; } @@ -323,7 +392,13 @@ static int __init init_lapic_nmi_sysfs(void) { int error; - if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC) + /* should really be a BUG_ON but b/c this is an + * init call, it just doesn't work. -dcz + */ + if (nmi_watchdog != NMI_LOCAL_APIC) + return 0; + + if ( atomic_read(&nmi_active) < 0 ) return 0; error = sysdev_class_register(&nmi_sysclass); @@ -341,74 +416,209 @@ late_initcall(init_lapic_nmi_sysfs); * Original code written by Keith Owens. */ -static void clear_msr_range(unsigned int base, unsigned int n) -{ - unsigned int i; +/* Note that these events don't tick when the CPU idles. This means + the frequency varies with CPU load. */ - for(i = 0; i < n; ++i) - wrmsr(base+i, 0, 0); -} +#define K7_EVNTSEL_ENABLE (1 << 22) +#define K7_EVNTSEL_INT (1 << 20) +#define K7_EVNTSEL_OS (1 << 17) +#define K7_EVNTSEL_USR (1 << 16) +#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 +#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING -static void setup_k7_watchdog(void) +static int setup_k7_watchdog(void) { - int i; + unsigned int perfctr_msr, evntsel_msr; unsigned int evntsel; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - nmi_perfctr_msr = MSR_K7_PERFCTR0; + perfctr_msr = MSR_K7_PERFCTR0; + evntsel_msr = MSR_K7_EVNTSEL0; + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; - for(i = 0; i < 4; ++i) { - /* Simulator may not support it */ - if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) { - nmi_perfctr_msr = 0; - return; - } - wrmsrl(MSR_K7_PERFCTR0+i, 0UL); - } + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; + + /* Simulator may not support it */ + if (checking_wrmsrl(evntsel_msr, 0UL)) + goto fail2; + wrmsrl(perfctr_msr, 0UL); evntsel = K7_EVNTSEL_INT | K7_EVNTSEL_OS | K7_EVNTSEL_USR | K7_NMI_EVENT; - wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); - wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz)); + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= K7_EVNTSEL_ENABLE; - wrmsr(MSR_K7_EVNTSEL0, evntsel, 0); + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + wd->check_bit = 1ULL<<63; + return 1; +fail2: + release_evntsel_nmi(evntsel_msr); +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; } -static void disable_intel_arch_watchdog(void) +static void stop_k7_watchdog(void) { - unsigned ebx; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - /* - * Check whether the Architectural PerfMon supports - * Unhalted Core Cycles Event or not. - * NOTE: Corresponding bit = 0 in ebp indicates event present. + wrmsr(wd->evntsel_msr, 0, 0); + + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); +} + +/* Note that these events don't tick when the CPU idles. This means + the frequency varies with CPU load. */ + +#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) +#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) +#define P4_ESCR_OS (1<<3) +#define P4_ESCR_USR (1<<2) +#define P4_CCCR_OVF_PMI0 (1<<26) +#define P4_CCCR_OVF_PMI1 (1<<27) +#define P4_CCCR_THRESHOLD(N) ((N)<<20) +#define P4_CCCR_COMPLEMENT (1<<19) +#define P4_CCCR_COMPARE (1<<18) +#define P4_CCCR_REQUIRED (3<<16) +#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) +#define P4_CCCR_ENABLE (1<<12) +#define P4_CCCR_OVF (1<<31) +/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter + CRU_ESCR0 (with any non-null event selector) through a complemented + max threshold. [IA32-Vol3, Section 14.9.9] */ + +static int setup_p4_watchdog(void) +{ + unsigned int perfctr_msr, evntsel_msr, cccr_msr; + unsigned int evntsel, cccr_val; + unsigned int misc_enable, dummy; + unsigned int ht_num; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy); + if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) + return 0; + +#ifdef CONFIG_SMP + /* detect which hyperthread we are on */ + if (smp_num_siblings == 2) { + unsigned int ebx, apicid; + + ebx = cpuid_ebx(1); + apicid = (ebx >> 24) & 0xff; + ht_num = apicid & 1; + } else +#endif + ht_num = 0; + + /* performance counters are shared resources + * assign each hyperthread its own set + * (re-use the ESCR0 register, seems safe + * and keeps the cccr_val the same) */ - ebx = cpuid_ebx(10); - if (!(ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, 0, 0); + if (!ht_num) { + /* logical cpu 0 */ + perfctr_msr = MSR_P4_IQ_PERFCTR0; + evntsel_msr = MSR_P4_CRU_ESCR0; + cccr_msr = MSR_P4_IQ_CCCR0; + cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); + } else { + /* logical cpu 1 */ + perfctr_msr = MSR_P4_IQ_PERFCTR1; + evntsel_msr = MSR_P4_CRU_ESCR0; + cccr_msr = MSR_P4_IQ_CCCR1; + cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4); + } + + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; + + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; + + evntsel = P4_ESCR_EVENT_SELECT(0x3F) + | P4_ESCR_OS + | P4_ESCR_USR; + + cccr_val |= P4_CCCR_THRESHOLD(15) + | P4_CCCR_COMPLEMENT + | P4_CCCR_COMPARE + | P4_CCCR_REQUIRED; + + wrmsr(evntsel_msr, evntsel, 0); + wrmsr(cccr_msr, cccr_val, 0); + wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + apic_write(APIC_LVTPC, APIC_DM_NMI); + cccr_val |= P4_CCCR_ENABLE; + wrmsr(cccr_msr, cccr_val, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = cccr_msr; + wd->check_bit = 1ULL<<39; + return 1; +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; +} + +static void stop_p4_watchdog(void) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + wrmsr(wd->cccr_msr, 0, 0); + wrmsr(wd->evntsel_msr, 0, 0); + + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); } +#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL +#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK + static int setup_intel_arch_watchdog(void) { + unsigned int ebx; + union cpuid10_eax eax; + unsigned int unused; + unsigned int perfctr_msr, evntsel_msr; unsigned int evntsel; - unsigned ebx; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); /* * Check whether the Architectural PerfMon supports * Unhalted Core Cycles Event or not. - * NOTE: Corresponding bit = 0 in ebp indicates event present. + * NOTE: Corresponding bit = 0 in ebx indicates event present. */ - ebx = cpuid_ebx(10); - if ((ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) - return 0; + cpuid(10, &(eax.full), &ebx, &unused, &unused); + if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || + (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + goto fail; + + perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0; + evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0; - nmi_perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0; + if (!reserve_perfctr_nmi(perfctr_msr)) + goto fail; - clear_msr_range(MSR_ARCH_PERFMON_EVENTSEL0, 2); - clear_msr_range(MSR_ARCH_PERFMON_PERFCTR0, 2); + if (!reserve_evntsel_nmi(evntsel_msr)) + goto fail1; + + wrmsrl(perfctr_msr, 0UL); evntsel = ARCH_PERFMON_EVENTSEL_INT | ARCH_PERFMON_EVENTSEL_OS @@ -416,84 +626,122 @@ static int setup_intel_arch_watchdog(void) | ARCH_PERFMON_NMI_EVENT_SEL | ARCH_PERFMON_NMI_EVENT_UMASK; - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0); - wrmsrl(MSR_ARCH_PERFMON_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz)); + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; - wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0); + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + wd->check_bit = 1ULL << (eax.split.bit_width - 1); return 1; +fail1: + release_perfctr_nmi(perfctr_msr); +fail: + return 0; } - -static int setup_p4_watchdog(void) +static void stop_intel_arch_watchdog(void) { - unsigned int misc_enable, dummy; + unsigned int ebx; + union cpuid10_eax eax; + unsigned int unused; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy); - if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) - return 0; + /* + * Check whether the Architectural PerfMon supports + * Unhalted Core Cycles Event or not. + * NOTE: Corresponding bit = 0 in ebx indicates event present. + */ + cpuid(10, &(eax.full), &ebx, &unused, &unused); + if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || + (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + return; - nmi_perfctr_msr = MSR_P4_IQ_COUNTER0; - nmi_p4_cccr_val = P4_NMI_IQ_CCCR0; -#ifdef CONFIG_SMP - if (smp_num_siblings == 2) - nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1; -#endif + wrmsr(wd->evntsel_msr, 0, 0); - if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL)) - clear_msr_range(0x3F1, 2); - /* MSR 0x3F0 seems to have a default value of 0xFC00, but current - docs doesn't fully define it, so leave it alone for now. */ - if (boot_cpu_data.x86_model >= 0x3) { - /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */ - clear_msr_range(0x3A0, 26); - clear_msr_range(0x3BC, 3); - } else { - clear_msr_range(0x3A0, 31); - } - clear_msr_range(0x3C0, 6); - clear_msr_range(0x3C8, 6); - clear_msr_range(0x3E0, 2); - clear_msr_range(MSR_P4_CCCR0, 18); - clear_msr_range(MSR_P4_PERFCTR0, 18); - - wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0); - wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0); - Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz * 1000UL / nmi_hz)); - wrmsrl(MSR_P4_IQ_COUNTER0, -((u64)cpu_khz * 1000 / nmi_hz)); - apic_write(APIC_LVTPC, APIC_DM_NMI); - wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); - return 1; + release_evntsel_nmi(wd->evntsel_msr); + release_perfctr_nmi(wd->perfctr_msr); } -void setup_apic_nmi_watchdog(void) +void setup_apic_nmi_watchdog(void *unused) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - if (boot_cpu_data.x86 != 15) - return; - if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) - return; - setup_k7_watchdog(); - break; - case X86_VENDOR_INTEL: - if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { - if (!setup_intel_arch_watchdog()) + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + /* only support LOCAL and IO APICs for now */ + if ((nmi_watchdog != NMI_LOCAL_APIC) && + (nmi_watchdog != NMI_IO_APIC)) + return; + + if (wd->enabled == 1) + return; + + /* cheap hack to support suspend/resume */ + /* if cpu0 is not active neither should the other cpus */ + if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) + return; + + if (nmi_watchdog == NMI_LOCAL_APIC) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) return; - } else if (boot_cpu_data.x86 == 15) { + if (!setup_k7_watchdog()) + return; + break; + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + if (!setup_intel_arch_watchdog()) + return; + break; + } if (!setup_p4_watchdog()) return; - } else { + break; + default: return; } + } + wd->enabled = 1; + atomic_inc(&nmi_active); +} + +void stop_apic_nmi_watchdog(void *unused) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); - break; + /* only support LOCAL and IO APICs for now */ + if ((nmi_watchdog != NMI_LOCAL_APIC) && + (nmi_watchdog != NMI_IO_APIC)) + return; - default: + if (wd->enabled == 0) return; + + if (nmi_watchdog == NMI_LOCAL_APIC) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + if (strstr(boot_cpu_data.x86_model_id, "Screwdriver")) + return; + stop_k7_watchdog(); + break; + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + stop_intel_arch_watchdog(); + break; + } + stop_p4_watchdog(); + break; + default: + return; + } } - lapic_nmi_owner = LAPIC_NMI_WATCHDOG; - nmi_active = 1; + wd->enabled = 0; + atomic_dec(&nmi_active); } /* @@ -526,93 +774,109 @@ void touch_nmi_watchdog (void) touch_softlockup_watchdog(); } -void __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) +int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) { int sum; int touched = 0; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + u64 dummy; + int rc=0; + + /* check for other users first */ + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) { + rc = 1; + touched = 1; + } sum = read_pda(apic_timer_irqs); if (__get_cpu_var(nmi_touch)) { __get_cpu_var(nmi_touch) = 0; touched = 1; } + #ifdef CONFIG_X86_MCE /* Could check oops_in_progress here too, but it's safer not too */ if (atomic_read(&mce_entry) > 0) touched = 1; #endif + /* if the apic timer isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) { - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - local_set(&__get_cpu_var(alert_counter), 0); - return; - } - die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs); - } + if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) + die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, + panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); } - if (nmi_perfctr_msr) { - if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) { - /* - * P4 quirks: - * - An overflown perfctr will assert its interrupt - * until the OVF flag in its CCCR is cleared. - * - LVTPC is masked on interrupt and must be - * unmasked by the LVTPC handler. - */ - wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); - apic_write(APIC_LVTPC, APIC_DM_NMI); - } else if (nmi_perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { - /* - * For Intel based architectural perfmon - * - LVTPC is masked on interrupt and must be - * unmasked by the LVTPC handler. + + /* see if the nmi watchdog went off */ + if (wd->enabled) { + if (nmi_watchdog == NMI_LOCAL_APIC) { + rdmsrl(wd->perfctr_msr, dummy); + if (dummy & wd->check_bit){ + /* this wasn't a watchdog timer interrupt */ + goto done; + } + + /* only Intel uses the cccr msr */ + if (wd->cccr_msr != 0) { + /* + * P4 quirks: + * - An overflown perfctr will assert its interrupt + * until the OVF flag in its CCCR is cleared. + * - LVTPC is masked on interrupt and must be + * unmasked by the LVTPC handler. + */ + rdmsrl(wd->cccr_msr, dummy); + dummy &= ~P4_CCCR_OVF; + wrmsrl(wd->cccr_msr, dummy); + apic_write(APIC_LVTPC, APIC_DM_NMI); + } else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { + /* + * ArchPerfom/Core Duo needs to re-unmask + * the apic vector + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + } + /* start the cycle over again */ + wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + rc = 1; + } else if (nmi_watchdog == NMI_IO_APIC) { + /* don't know how to accurately check for this. + * just assume it was a watchdog timer interrupt + * This matches the old behaviour. */ - apic_write(APIC_LVTPC, APIC_DM_NMI); - } - wrmsrl(nmi_perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + rc = 1; + } else + printk(KERN_WARNING "Unknown enabled NMI hardware?!\n"); } +done: + return rc; } -static __kprobes int dummy_nmi_callback(struct pt_regs * regs, int cpu) -{ - return 0; -} - -static nmi_callback_t nmi_callback = dummy_nmi_callback; - asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code) { - int cpu = safe_smp_processor_id(); - nmi_enter(); add_pda(__nmi_count,1); - if (!rcu_dereference(nmi_callback)(regs, cpu)) - default_do_nmi(regs); + default_do_nmi(regs); nmi_exit(); } -void set_nmi_callback(nmi_callback_t callback) +int do_nmi_callback(struct pt_regs * regs, int cpu) { - vmalloc_sync_all(); - rcu_assign_pointer(nmi_callback, callback); -} -EXPORT_SYMBOL_GPL(set_nmi_callback); - -void unset_nmi_callback(void) -{ - nmi_callback = dummy_nmi_callback; +#ifdef CONFIG_SYSCTL + if (unknown_nmi_panic) + return unknown_nmi_panic_callback(regs, cpu); +#endif + return 0; } -EXPORT_SYMBOL_GPL(unset_nmi_callback); #ifdef CONFIG_SYSCTL @@ -621,36 +885,42 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) unsigned char reason = get_nmi_reason(); char buf[64]; - if (!(reason & 0xc0)) { - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf,regs); - } + sprintf(buf, "NMI received for unknown reason %02x\n", reason); + die_nmi(buf, regs, 1); /* Always panic here */ return 0; } /* - * proc handler for /proc/sys/kernel/unknown_nmi_panic + * proc handler for /proc/sys/kernel/nmi */ -int proc_unknown_nmi_panic(struct ctl_table *table, int write, struct file *file, +int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, void __user *buffer, size_t *length, loff_t *ppos) { int old_state; - old_state = unknown_nmi_panic; + nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; + old_state = nmi_watchdog_enabled; proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!unknown_nmi_panic) + if (!!old_state == !!nmi_watchdog_enabled) return 0; - if (unknown_nmi_panic) { - if (reserve_lapic_nmi() < 0) { - unknown_nmi_panic = 0; - return -EBUSY; - } else { - set_nmi_callback(unknown_nmi_panic_callback); - } + if (atomic_read(&nmi_active) < 0) { + printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); + return -EIO; + } + + /* if nmi_watchdog is not set yet, then set it */ + nmi_watchdog_default(); + + if (nmi_watchdog == NMI_LOCAL_APIC) { + if (nmi_watchdog_enabled) + enable_lapic_nmi_watchdog(); + else + disable_lapic_nmi_watchdog(); } else { - release_lapic_nmi(); - unset_nmi_callback(); + printk( KERN_WARNING + "NMI watchdog doesn't know what hardware to touch\n"); + return -EIO; } return 0; } @@ -659,8 +929,12 @@ int proc_unknown_nmi_panic(struct ctl_table *table, int write, struct file *file EXPORT_SYMBOL(nmi_active); EXPORT_SYMBOL(nmi_watchdog); -EXPORT_SYMBOL(reserve_lapic_nmi); -EXPORT_SYMBOL(release_lapic_nmi); +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi); +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit); +EXPORT_SYMBOL(reserve_perfctr_nmi); +EXPORT_SYMBOL(release_perfctr_nmi); +EXPORT_SYMBOL(reserve_evntsel_nmi); +EXPORT_SYMBOL(release_evntsel_nmi); EXPORT_SYMBOL(disable_timer_nmi_watchdog); EXPORT_SYMBOL(enable_timer_nmi_watchdog); EXPORT_SYMBOL(touch_nmi_watchdog); diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c index 146924ba5df5..cfb09b07ae99 100644 --- a/arch/x86_64/kernel/pci-calgary.c +++ b/arch/x86_64/kernel/pci-calgary.c @@ -86,7 +86,8 @@ #define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */ #define MAX_NUM_CHASSIS 8 /* max number of chassis */ -#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2) /* max dev->bus->number */ +/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */ +#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2) #define PHBS_PER_CALGARY 4 /* register offsets in Calgary's internal register space */ @@ -111,31 +112,49 @@ static const unsigned long phb_offsets[] = { 0xB000 /* PHB3 */ }; -static char bus_to_phb[MAX_PHB_BUS_NUM]; -void* tce_table_kva[MAX_PHB_BUS_NUM]; unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED; static int translate_empty_slots __read_mostly = 0; static int calgary_detected __read_mostly = 0; -/* - * the bitmap of PHBs the user requested that we disable - * translation on. - */ -static DECLARE_BITMAP(translation_disabled, MAX_PHB_BUS_NUM); +struct calgary_bus_info { + void *tce_space; + unsigned char translation_disabled; + signed char phbid; +}; + +static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, }; static void tce_cache_blast(struct iommu_table *tbl); /* enable this to stress test the chip's TCE cache */ #ifdef CONFIG_IOMMU_DEBUG -static inline void tce_cache_blast_stress(struct iommu_table *tbl) +int debugging __read_mostly = 1; + +static inline unsigned long verify_bit_range(unsigned long* bitmap, + int expected, unsigned long start, unsigned long end) { - tce_cache_blast(tbl); + unsigned long idx = start; + + BUG_ON(start >= end); + + while (idx < end) { + if (!!test_bit(idx, bitmap) != expected) + return idx; + ++idx; + } + + /* all bits have the expected value */ + return ~0UL; } -#else -static inline void tce_cache_blast_stress(struct iommu_table *tbl) +#else /* debugging is disabled */ +int debugging __read_mostly = 0; + +static inline unsigned long verify_bit_range(unsigned long* bitmap, + int expected, unsigned long start, unsigned long end) { + return ~0UL; } -#endif /* BLAST_TCE_CACHE_ON_UNMAP */ +#endif /* CONFIG_IOMMU_DEBUG */ static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen) { @@ -149,7 +168,7 @@ static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen) static inline int translate_phb(struct pci_dev* dev) { - int disabled = test_bit(dev->bus->number, translation_disabled); + int disabled = bus_info[dev->bus->number].translation_disabled; return !disabled; } @@ -158,6 +177,7 @@ static void iommu_range_reserve(struct iommu_table *tbl, { unsigned long index; unsigned long end; + unsigned long badbit; index = start_addr >> PAGE_SHIFT; @@ -169,14 +189,15 @@ static void iommu_range_reserve(struct iommu_table *tbl, if (end > tbl->it_size) /* don't go off the table */ end = tbl->it_size; - while (index < end) { - if (test_bit(index, tbl->it_map)) + badbit = verify_bit_range(tbl->it_map, 0, index, end); + if (badbit != ~0UL) { + if (printk_ratelimit()) printk(KERN_ERR "Calgary: entry already allocated at " "0x%lx tbl %p dma 0x%lx npages %u\n", - index, tbl, start_addr, npages); - ++index; + badbit, tbl, start_addr, npages); } - set_bit_string(tbl->it_map, start_addr >> PAGE_SHIFT, npages); + + set_bit_string(tbl->it_map, index, npages); } static unsigned long iommu_range_alloc(struct iommu_table *tbl, @@ -243,7 +264,7 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, unsigned int npages) { unsigned long entry; - unsigned long i; + unsigned long badbit; entry = dma_addr >> PAGE_SHIFT; @@ -251,16 +272,15 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, tce_free(tbl, entry, npages); - for (i = 0; i < npages; ++i) { - if (!test_bit(entry + i, tbl->it_map)) + badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages); + if (badbit != ~0UL) { + if (printk_ratelimit()) printk(KERN_ERR "Calgary: bit is off at 0x%lx " "tbl %p dma 0x%Lx entry 0x%lx npages %u\n", - entry + i, tbl, dma_addr, entry, npages); + badbit, tbl, dma_addr, entry, npages); } __clear_bit_string(tbl->it_map, entry, npages); - - tce_cache_blast_stress(tbl); } static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, @@ -454,7 +474,7 @@ static struct dma_mapping_ops calgary_dma_ops = { static inline int busno_to_phbid(unsigned char num) { - return bus_to_phb[num]; + return bus_info[num].phbid; } static inline unsigned long split_queue_offset(unsigned char num) @@ -631,6 +651,10 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar) if (ret) return ret; + tbl = dev->sysdata; + tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space; + tce_free(tbl, 0, tbl->it_size); + calgary_reserve_regions(dev); /* set TARs for each PHB */ @@ -654,11 +678,12 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar) return 0; } -static void __init calgary_free_tar(struct pci_dev *dev) +static void __init calgary_free_bus(struct pci_dev *dev) { u64 val64; struct iommu_table *tbl = dev->sysdata; void __iomem *target; + unsigned int bitmapsz; target = calgary_reg(tbl->bbar, tar_offset(dev->bus->number)); val64 = be64_to_cpu(readq(target)); @@ -666,8 +691,15 @@ static void __init calgary_free_tar(struct pci_dev *dev) writeq(cpu_to_be64(val64), target); readq(target); /* flush */ + bitmapsz = tbl->it_size / BITS_PER_BYTE; + free_pages((unsigned long)tbl->it_map, get_order(bitmapsz)); + tbl->it_map = NULL; + kfree(tbl); dev->sysdata = NULL; + + /* Can't free bootmem allocated memory after system is up :-( */ + bus_info[dev->bus->number].tce_space = NULL; } static void calgary_watchdog(unsigned long data) @@ -772,12 +804,11 @@ static inline unsigned int __init locate_register_space(struct pci_dev *dev) return address; } -static int __init calgary_init_one_nontraslated(struct pci_dev *dev) +static void __init calgary_init_one_nontraslated(struct pci_dev *dev) { + pci_dev_get(dev); dev->sysdata = NULL; dev->bus->self = dev; - - return 0; } static int __init calgary_init_one(struct pci_dev *dev) @@ -798,6 +829,7 @@ static int __init calgary_init_one(struct pci_dev *dev) if (ret) goto iounmap; + pci_dev_get(dev); dev->bus->self = dev; calgary_enable_translation(dev); @@ -824,10 +856,9 @@ static int __init calgary_init(void) calgary_init_one_nontraslated(dev); continue; } - if (!tce_table_kva[dev->bus->number] && !translate_empty_slots) { - pci_dev_put(dev); + if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots) continue; - } + ret = calgary_init_one(dev); if (ret) goto error; @@ -840,15 +871,18 @@ error: dev = pci_find_device_reverse(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CALGARY, dev); + if (!dev) + break; if (!translate_phb(dev)) { pci_dev_put(dev); continue; } - if (!tce_table_kva[dev->bus->number] && !translate_empty_slots) + if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots) continue; + calgary_disable_translation(dev); - calgary_free_tar(dev); - pci_dev_put(dev); + calgary_free_bus(dev); + pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */ } return ret; @@ -890,13 +924,15 @@ void __init detect_calgary(void) if (swiotlb || no_iommu || iommu_detected) return; + if (!early_pci_allowed()) + return; + specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE); for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) { int dev; - - tce_table_kva[bus] = NULL; - bus_to_phb[bus] = -1; + struct calgary_bus_info *info = &bus_info[bus]; + info->phbid = -1; if (read_pci_config(bus, 0, 0, 0) != PCI_VENDOR_DEVICE_ID_CALGARY) continue; @@ -907,12 +943,9 @@ void __init detect_calgary(void) */ phb = (phb + 1) % PHBS_PER_CALGARY; - if (test_bit(bus, translation_disabled)) { - printk(KERN_INFO "Calgary: translation is disabled for " - "PHB 0x%x\n", bus); - /* skip this phb, don't allocate a tbl for it */ + if (info->translation_disabled) continue; - } + /* * Scan the slots of the PCI bus to see if there is a device present. * The parent bus will be the zero-ith device, so start at 1. @@ -923,8 +956,8 @@ void __init detect_calgary(void) tbl = alloc_tce_table(); if (!tbl) goto cleanup; - tce_table_kva[bus] = tbl; - bus_to_phb[bus] = phb; + info->tce_space = tbl; + info->phbid = phb; calgary_found = 1; break; } @@ -934,15 +967,20 @@ void __init detect_calgary(void) if (calgary_found) { iommu_detected = 1; calgary_detected = 1; - printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected. " - "TCE table spec is %d.\n", specified_table_size); + printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n"); + printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, " + "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size, + debugging ? "enabled" : "disabled"); } return; cleanup: - for (--bus; bus >= 0; --bus) - if (tce_table_kva[bus]) - free_tce_table(tce_table_kva[bus]); + for (--bus; bus >= 0; --bus) { + struct calgary_bus_info *info = &bus_info[bus]; + + if (info->tce_space) + free_tce_table(info->tce_space); + } } int __init calgary_iommu_init(void) @@ -1016,7 +1054,7 @@ static int __init calgary_parse_options(char *p) if (bridge < MAX_PHB_BUS_NUM) { printk(KERN_INFO "Calgary: disabling " "translation for PHB 0x%x\n", bridge); - set_bit(bridge, translation_disabled); + bus_info[bridge].translation_disabled = 1; } } diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 9c44f4f2433d..4dcb671bd19f 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -236,6 +236,9 @@ __init int iommu_setup(char *p) { iommu_merge = 1; + if (!p) + return -EINVAL; + while (*p) { if (!strncmp(p,"off",3)) no_iommu = 1; @@ -278,9 +281,9 @@ __init int iommu_setup(char *p) if (*p == ',') ++p; } - return 1; + return 0; } -__setup("iommu=", iommu_setup); +early_param("iommu", iommu_setup); void __init pci_iommu_alloc(void) { diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index 6d3e61baf7a0..16261a8a3303 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -239,8 +239,6 @@ dma_addr_t gart_map_single(struct device *dev, void *addr, size_t size, int dir) { unsigned long phys_mem, bus; - BUG_ON(dir == DMA_NONE); - if (!dev) dev = &fallback_dev; @@ -383,7 +381,6 @@ int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir) unsigned long pages = 0; int need = 0, nextneed; - BUG_ON(dir == DMA_NONE); if (nents == 0) return 0; diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c index aad7609d8e92..df09ab05a1bd 100644 --- a/arch/x86_64/kernel/pci-nommu.c +++ b/arch/x86_64/kernel/pci-nommu.c @@ -59,7 +59,6 @@ int nommu_map_sg(struct device *hwdev, struct scatterlist *sg, { int i; - BUG_ON(direction == DMA_NONE); for (i = 0; i < nents; i++ ) { struct scatterlist *s = &sg[i]; BUG_ON(!s->page); diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index bb6745d13b8f..458006ae19f3 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -80,25 +80,25 @@ void idle_notifier_unregister(struct notifier_block *n) } EXPORT_SYMBOL(idle_notifier_unregister); -enum idle_state { CPU_IDLE, CPU_NOT_IDLE }; -static DEFINE_PER_CPU(enum idle_state, idle_state) = CPU_NOT_IDLE; - void enter_idle(void) { - __get_cpu_var(idle_state) = CPU_IDLE; + write_pda(isidle, 1); atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); } static void __exit_idle(void) { - __get_cpu_var(idle_state) = CPU_NOT_IDLE; + if (read_pda(isidle) == 0) + return; + write_pda(isidle, 0); atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); } /* Called from interrupts to signify idle end */ void exit_idle(void) { - if (current->pid | read_pda(irqcount)) + /* idle loop has pid 0 */ + if (current->pid) return; __exit_idle(); } @@ -220,6 +220,9 @@ void cpu_idle (void) play_dead(); enter_idle(); idle(); + /* In many cases the interrupt that ended idle + has already called exit_idle. But some idle + loops can be woken up without interrupt. */ __exit_idle(); } @@ -350,6 +353,7 @@ void exit_thread(void) kfree(t->io_bitmap_ptr); t->io_bitmap_ptr = NULL; + clear_thread_flag(TIF_IO_BITMAP); /* * Careful, clear this in the TSS too: */ @@ -369,6 +373,7 @@ void flush_thread(void) if (t->flags & _TIF_IA32) current_thread_info()->status |= TS_COMPAT; } + t->flags &= ~_TIF_DEBUG; tsk->thread.debugreg0 = 0; tsk->thread.debugreg1 = 0; @@ -461,7 +466,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, asm("mov %%es,%0" : "=m" (p->thread.es)); asm("mov %%ds,%0" : "=m" (p->thread.ds)); - if (unlikely(me->thread.io_bitmap_ptr != NULL)) { + if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) { p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); if (!p->thread.io_bitmap_ptr) { p->thread.io_bitmap_max = 0; @@ -469,6 +474,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, } memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, IO_BITMAP_BYTES); + set_tsk_thread_flag(p, TIF_IO_BITMAP); } /* @@ -498,6 +504,40 @@ out: */ #define loaddebug(thread,r) set_debugreg(thread->debugreg ## r, r) +static inline void __switch_to_xtra(struct task_struct *prev_p, + struct task_struct *next_p, + struct tss_struct *tss) +{ + struct thread_struct *prev, *next; + + prev = &prev_p->thread, + next = &next_p->thread; + + if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { + loaddebug(next, 0); + loaddebug(next, 1); + loaddebug(next, 2); + loaddebug(next, 3); + /* no 4 and 5 */ + loaddebug(next, 6); + loaddebug(next, 7); + } + + if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { + /* + * Copy the relevant range of the IO bitmap. + * Normally this is 128 bytes or less: + */ + memcpy(tss->io_bitmap, next->io_bitmap_ptr, + max(prev->io_bitmap_max, next->io_bitmap_max)); + } else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) { + /* + * Clear any possible leftover bits: + */ + memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); + } +} + /* * switch_to(x,y) should switch tasks from x to y. * @@ -515,6 +555,10 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); + /* we're going to use this soon, after a few expensive things */ + if (next_p->fpu_counter>5) + prefetch(&next->i387.fxsave); + /* * Reload esp0, LDT and the page table pointer: */ @@ -583,41 +627,29 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) And the AMD workaround requires it to be after DS reload. */ unlazy_fpu(prev_p); write_pda(kernelstack, - task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); - + (unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); +#ifdef CONFIG_CC_STACKPROTECTOR + write_pda(stack_canary, next_p->stack_canary); /* - * Now maybe reload the debug registers + * Build time only check to make sure the stack_canary is at + * offset 40 in the pda; this is a gcc ABI requirement */ - if (unlikely(next->debugreg7)) { - loaddebug(next, 0); - loaddebug(next, 1); - loaddebug(next, 2); - loaddebug(next, 3); - /* no 4 and 5 */ - loaddebug(next, 6); - loaddebug(next, 7); - } - + BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40); +#endif - /* - * Handle the IO bitmap - */ - if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr)) { - if (next->io_bitmap_ptr) - /* - * Copy the relevant range of the IO bitmap. - * Normally this is 128 bytes or less: - */ - memcpy(tss->io_bitmap, next->io_bitmap_ptr, - max(prev->io_bitmap_max, next->io_bitmap_max)); - else { - /* - * Clear any possible leftover bits: - */ - memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); - } - } + /* + * Now maybe reload the debug registers and handle I/O bitmaps + */ + if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW)) + || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) + __switch_to_xtra(prev_p, next_p, tss); + /* If the task has used fpu the last 5 timeslices, just do a full + * restore of the math state immediately to avoid the trap; the + * chances of needing FPU soon are obviously high now + */ + if (next_p->fpu_counter>5) + math_state_restore(); return prev_p; } @@ -834,7 +866,7 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) unsigned long arch_align_stack(unsigned long sp) { - if (randomize_va_space) + if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) sp -= get_random_int() % 8192; return sp & ~0xf; } diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index 2d50024c9f30..addc14af0c56 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -116,17 +116,17 @@ unsigned long convert_rip_to_linear(struct task_struct *child, struct pt_regs *r return addr; } -static int is_at_popf(struct task_struct *child, struct pt_regs *regs) +static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) { int i, copied; - unsigned char opcode[16]; + unsigned char opcode[15]; unsigned long addr = convert_rip_to_linear(child, regs); copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0); for (i = 0; i < copied; i++) { switch (opcode[i]) { - /* popf */ - case 0x9d: + /* popf and iret */ + case 0x9d: case 0xcf: return 1; /* CHECKME: 64 65 */ @@ -138,14 +138,17 @@ static int is_at_popf(struct task_struct *child, struct pt_regs *regs) case 0x26: case 0x2e: case 0x36: case 0x3e: case 0x64: case 0x65: - case 0xf0: case 0xf2: case 0xf3: + case 0xf2: case 0xf3: continue; - /* REX prefixes */ case 0x40 ... 0x4f: + if (regs->cs != __USER_CS) + /* 32-bit mode: register increment */ + return 0; + /* 64-bit mode: REX prefix */ continue; - /* CHECKME: f0, f2, f3 */ + /* CHECKME: f2, f3 */ /* * pushf: NOTE! We should probably not let @@ -186,10 +189,8 @@ static void set_singlestep(struct task_struct *child) * ..but if TF is changed by the instruction we will trace, * don't mark it as being "us" that set it, so that we * won't clear it by hand later. - * - * AK: this is not enough, LAHF and IRET can change TF in user space too. */ - if (is_at_popf(child, regs)) + if (is_setting_trap_flag(child, regs)) return; child->ptrace |= PT_DTRACE; @@ -420,9 +421,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) if ((0x5554 >> ((data >> (16 + 4*i)) & 0xf)) & 1) break; if (i == 4) { - child->thread.debugreg7 = data; + child->thread.debugreg7 = data; + if (data) + set_tsk_thread_flag(child, TIF_DEBUG); + else + clear_tsk_thread_flag(child, TIF_DEBUG); ret = 0; - } + } break; } break; diff --git a/arch/x86_64/kernel/relocate_kernel.S b/arch/x86_64/kernel/relocate_kernel.S index d24fa9b72a2b..14e95872c6a3 100644 --- a/arch/x86_64/kernel/relocate_kernel.S +++ b/arch/x86_64/kernel/relocate_kernel.S @@ -7,31 +7,169 @@ */ #include <linux/linkage.h> +#include <asm/page.h> +#include <asm/kexec.h> - /* - * Must be relocatable PIC code callable as a C function, that once - * it starts can not use the previous processes stack. - */ - .globl relocate_new_kernel +/* + * Must be relocatable PIC code callable as a C function + */ + +#define PTR(x) (x << 3) +#define PAGE_ALIGNED (1 << PAGE_SHIFT) +#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */ + + .text + .align PAGE_ALIGNED .code64 + .globl relocate_kernel +relocate_kernel: + /* %rdi indirection_page + * %rsi page_list + * %rdx start address + */ + + /* map the control page at its virtual address */ + + movq $0x0000ff8000000000, %r10 /* mask */ + mov $(39 - 3), %cl /* bits to shift */ + movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PGD)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PUD_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PUD_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PMD_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PMD_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PTE_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PTE_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + /* identity map the control page at its physical address */ + + movq $0x0000ff8000000000, %r10 /* mask */ + mov $(39 - 3), %cl /* bits to shift */ + movq PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PGD)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PUD_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PUD_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PMD_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PMD_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PTE_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PTE_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + relocate_new_kernel: - /* %rdi page_list - * %rsi reboot_code_buffer + /* %rdi indirection_page + * %rsi page_list * %rdx start address - * %rcx page_table - * %r8 arg5 - * %r9 arg6 */ /* zero out flags, and disable interrupts */ pushq $0 popfq - /* set a new stack at the bottom of our page... */ - lea 4096(%rsi), %rsp + /* get physical address of control page now */ + /* this is impossible after page table switch */ + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + + /* get physical address of page table now too */ + movq PTR(PA_TABLE_PAGE)(%rsi), %rcx - /* store the parameters back on the stack */ - pushq %rdx /* store the start address */ + /* switch to new set of page tables */ + movq PTR(PA_PGD)(%rsi), %r9 + movq %r9, %cr3 + + /* setup a new stack at the end of the physical control page */ + lea 4096(%r8), %rsp + + /* jump to identity mapped page */ + addq $(identity_mapped - relocate_kernel), %r8 + pushq %r8 + ret + +identity_mapped: + /* store the start address on the stack */ + pushq %rdx /* Set cr0 to a known state: * 31 1 == Paging enabled @@ -136,8 +274,3 @@ relocate_new_kernel: xorq %r15, %r15 ret -relocate_new_kernel_end: - - .globl relocate_new_kernel_size -relocate_new_kernel_size: - .quad relocate_new_kernel_end - relocate_new_kernel diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 4b39f0da17f3..f98e48cae6da 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -74,16 +74,6 @@ EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; -int acpi_disabled; -EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI -extern int __initdata acpi_ht; -extern acpi_interrupt_flags acpi_sci_flags; -int __initdata acpi_force = 0; -#endif - -int acpi_numa __initdata; - /* Boot loader ID as an integer, for the benefit of proc_dointvec */ int bootloader_type; @@ -107,7 +97,6 @@ struct sys_desc_table_struct { struct edid_info edid_info; EXPORT_SYMBOL_GPL(edid_info); -struct e820map e820; extern int root_mountflags; @@ -276,185 +265,22 @@ static void __init probe_roms(void) } } -/* Check for full argument with no trailing characters */ -static int fullarg(char *p, char *arg) +#ifdef CONFIG_PROC_VMCORE +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. This option will be passed + * by kexec loader to the capture kernel. + */ +static int __init setup_elfcorehdr(char *arg) { - int l = strlen(arg); - return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l])); + char *end; + if (!arg) + return -EINVAL; + elfcorehdr_addr = memparse(arg, &end); + return end > arg ? 0 : -EINVAL; } - -static __init void parse_cmdline_early (char ** cmdline_p) -{ - char c = ' ', *to = command_line, *from = COMMAND_LINE; - int len = 0; - int userdef = 0; - - for (;;) { - if (c != ' ') - goto next_char; - -#ifdef CONFIG_SMP - /* - * If the BIOS enumerates physical processors before logical, - * maxcpus=N at enumeration-time can be used to disable HT. - */ - else if (!memcmp(from, "maxcpus=", 8)) { - extern unsigned int maxcpus; - - maxcpus = simple_strtoul(from + 8, NULL, 0); - } -#endif -#ifdef CONFIG_ACPI - /* "acpi=off" disables both ACPI table parsing and interpreter init */ - if (fullarg(from,"acpi=off")) - disable_acpi(); - - if (fullarg(from, "acpi=force")) { - /* add later when we do DMI horrors: */ - acpi_force = 1; - acpi_disabled = 0; - } - - /* acpi=ht just means: do ACPI MADT parsing - at bootup, but don't enable the full ACPI interpreter */ - if (fullarg(from, "acpi=ht")) { - if (!acpi_force) - disable_acpi(); - acpi_ht = 1; - } - else if (fullarg(from, "pci=noacpi")) - acpi_disable_pci(); - else if (fullarg(from, "acpi=noirq")) - acpi_noirq_set(); - - else if (fullarg(from, "acpi_sci=edge")) - acpi_sci_flags.trigger = 1; - else if (fullarg(from, "acpi_sci=level")) - acpi_sci_flags.trigger = 3; - else if (fullarg(from, "acpi_sci=high")) - acpi_sci_flags.polarity = 1; - else if (fullarg(from, "acpi_sci=low")) - acpi_sci_flags.polarity = 3; - - /* acpi=strict disables out-of-spec workarounds */ - else if (fullarg(from, "acpi=strict")) { - acpi_strict = 1; - } -#ifdef CONFIG_X86_IO_APIC - else if (fullarg(from, "acpi_skip_timer_override")) - acpi_skip_timer_override = 1; -#endif -#endif - - if (fullarg(from, "disable_timer_pin_1")) - disable_timer_pin_1 = 1; - if (fullarg(from, "enable_timer_pin_1")) - disable_timer_pin_1 = -1; - - if (fullarg(from, "nolapic") || fullarg(from, "disableapic")) { - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - disable_apic = 1; - } - - if (fullarg(from, "noapic")) - skip_ioapic_setup = 1; - - if (fullarg(from,"apic")) { - skip_ioapic_setup = 0; - ioapic_force = 1; - } - - if (!memcmp(from, "mem=", 4)) - parse_memopt(from+4, &from); - - if (!memcmp(from, "memmap=", 7)) { - /* exactmap option is for used defined memory */ - if (!memcmp(from+7, "exactmap", 8)) { -#ifdef CONFIG_CRASH_DUMP - /* If we are doing a crash dump, we - * still need to know the real mem - * size before original memory map is - * reset. - */ - saved_max_pfn = e820_end_of_ram(); -#endif - from += 8+7; - end_pfn_map = 0; - e820.nr_map = 0; - userdef = 1; - } - else { - parse_memmapopt(from+7, &from); - userdef = 1; - } - } - -#ifdef CONFIG_NUMA - if (!memcmp(from, "numa=", 5)) - numa_setup(from+5); -#endif - - if (!memcmp(from,"iommu=",6)) { - iommu_setup(from+6); - } - - if (fullarg(from,"oops=panic")) - panic_on_oops = 1; - - if (!memcmp(from, "noexec=", 7)) - nonx_setup(from + 7); - -#ifdef CONFIG_KEXEC - /* crashkernel=size@addr specifies the location to reserve for - * a crash kernel. By reserving this memory we guarantee - * that linux never set's it up as a DMA target. - * Useful for holding code to do something appropriate - * after a kernel panic. - */ - else if (!memcmp(from, "crashkernel=", 12)) { - unsigned long size, base; - size = memparse(from+12, &from); - if (*from == '@') { - base = memparse(from+1, &from); - /* FIXME: Do I want a sanity check - * to validate the memory range? - */ - crashk_res.start = base; - crashk_res.end = base + size - 1; - } - } -#endif - -#ifdef CONFIG_PROC_VMCORE - /* elfcorehdr= specifies the location of elf core header - * stored by the crashed kernel. This option will be passed - * by kexec loader to the capture kernel. - */ - else if(!memcmp(from, "elfcorehdr=", 11)) - elfcorehdr_addr = memparse(from+11, &from); -#endif - -#ifdef CONFIG_HOTPLUG_CPU - else if (!memcmp(from, "additional_cpus=", 16)) - setup_additional_cpus(from+16); +early_param("elfcorehdr", setup_elfcorehdr); #endif - next_char: - c = *(from++); - if (!c) - break; - if (COMMAND_LINE_SIZE <= ++len) - break; - *(to++) = c; - } - if (userdef) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - e820_print_map("user"); - } - *to = '\0'; - *cmdline_p = command_line; -} - #ifndef CONFIG_NUMA static void __init contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) @@ -521,6 +347,8 @@ static void discover_ebda(void) void __init setup_arch(char **cmdline_p) { + printk(KERN_INFO "Command line: %s\n", saved_command_line); + ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); screen_info = SCREEN_INFO; edid_info = EDID_INFO; @@ -547,16 +375,21 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(&_etext); data_resource.end = virt_to_phys(&_edata)-1; - parse_cmdline_early(cmdline_p); - early_identify_cpu(&boot_cpu_data); + strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + + parse_early_param(); + + finish_e820_parsing(); + /* * partially used pages are not usable - thus * we are rounding upwards: */ end_pfn = e820_end_of_ram(); - num_physpages = end_pfn; /* for pfn_valid */ + num_physpages = end_pfn; check_efer(); @@ -576,6 +409,11 @@ void __init setup_arch(char **cmdline_p) acpi_boot_table_init(); #endif + /* How many end-of-memory variables you have, grandma! */ + max_low_pfn = end_pfn; + max_pfn = end_pfn; + high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1; + #ifdef CONFIG_ACPI_NUMA /* * Parse SRAT to discover nodes. @@ -625,12 +463,10 @@ void __init setup_arch(char **cmdline_p) */ acpi_reserve_bootmem(); #endif -#ifdef CONFIG_X86_LOCAL_APIC /* * Find and reserve possible boot-time SMP configuration: */ find_smp_config(); -#endif #ifdef CONFIG_BLK_DEV_INITRD if (LOADER_TYPE && INITRD_START) { if (INITRD_START + INITRD_SIZE <= (end_pfn << PAGE_SHIFT)) { @@ -657,7 +493,9 @@ void __init setup_arch(char **cmdline_p) paging_init(); - check_ioapic(); +#ifdef CONFIG_PCI + early_quirks(); +#endif /* * set this early, so we dont allocate cpu0 @@ -674,14 +512,12 @@ void __init setup_arch(char **cmdline_p) init_cpu_to_node(); -#ifdef CONFIG_X86_LOCAL_APIC /* * get boot-time SMP configuration: */ if (smp_found_config) get_smp_config(); init_apic_mappings(); -#endif /* * Request address space for all standard RAM and ROM resources @@ -839,7 +675,7 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #endif } -static void __init init_amd(struct cpuinfo_x86 *c) +static void __cpuinit init_amd(struct cpuinfo_x86 *c) { unsigned level; @@ -895,6 +731,12 @@ static void __init init_amd(struct cpuinfo_x86 *c) /* Fix cpuid4 emulation for more */ num_cache_leaves = 3; + + /* When there is only one core no need to synchronize RDTSC */ + if (num_possible_cpus() == 1) + set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); + else + clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); } static void __cpuinit detect_ht(struct cpuinfo_x86 *c) @@ -976,8 +818,7 @@ static void srat_detect_node(void) node = first_node(node_online_map); numa_set_node(cpu, node); - if (acpi_numa > 0) - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); #endif } @@ -1011,6 +852,8 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) if ((c->x86 == 0xf && c->x86_model >= 0x03) || (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); + if (c->x86 == 6) + set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); c->x86_max_cores = intel_num_cpu_cores(c); @@ -1229,8 +1072,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", - "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 417de564456e..8c4b80fe71a1 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -24,7 +24,7 @@ #include <asm/proto.h> #include <asm/sections.h> -char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,}; +char x86_boot_params[BOOT_PARAM_SIZE] __initdata; cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; @@ -46,8 +46,10 @@ Control non executable mappings for 64bit processes. on Enable(default) off Disable */ -int __init nonx_setup(char *str) +static int __init nonx_setup(char *str) { + if (!str) + return -EINVAL; if (!strncmp(str, "on", 2)) { __supported_pte_mask |= _PAGE_NX; do_not_nx = 0; @@ -55,9 +57,9 @@ int __init nonx_setup(char *str) do_not_nx = 1; __supported_pte_mask &= ~_PAGE_NX; } - return 1; + return 0; } -__setup("noexec=", nonx_setup); /* parsed early actually */ +early_param("noexec", nonx_setup); int force_personality32 = 0; @@ -93,12 +95,9 @@ void __init setup_per_cpu_areas(void) #endif /* Copy section for each CPU (we discard the original) */ - size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES); -#ifdef CONFIG_MODULES - if (size < PERCPU_ENOUGH_ROOM) - size = PERCPU_ENOUGH_ROOM; -#endif + size = PERCPU_ENOUGH_ROOM; + printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size); for_each_cpu_mask (i, cpu_possible_map) { char *ptr; @@ -122,7 +121,10 @@ void pda_init(int cpu) /* Setup up data that may be needed in __get_free_pages early */ asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); + /* Memory clobbers used to order PDA accessed */ + mb(); wrmsrl(MSR_GS_BASE, pda); + mb(); pda->cpunumber = cpu; pda->irqcount = -1; @@ -178,6 +180,8 @@ void __cpuinit check_efer(void) } } +unsigned long kernel_eflags; + /* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT @@ -235,28 +239,17 @@ void __cpuinit cpu_init (void) * set up and load the per-CPU TSS */ for (v = 0; v < N_EXCEPTION_STACKS; v++) { + static const unsigned int order[N_EXCEPTION_STACKS] = { + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, + [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + }; if (cpu) { - static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER - }; - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); if (!estacks) panic("Cannot allocate exception stack %ld %d\n", v, cpu); } - switch (v + 1) { -#if DEBUG_STKSZ > EXCEPTION_STKSZ - case DEBUG_STACK: - cpu_pda(cpu)->debugstack = (unsigned long)estacks; - estacks += DEBUG_STKSZ; - break; -#endif - default: - estacks += EXCEPTION_STKSZ; - break; - } + estacks += PAGE_SIZE << order[v]; orig_ist->ist[v] = t->ist[v] = (unsigned long)estacks; } @@ -290,4 +283,6 @@ void __cpuinit cpu_init (void) set_debugreg(0UL, 7); fpu_init(); + + raw_local_save_flags(kernel_eflags); } diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index 28161170fb0a..49ec324cd141 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -38,37 +38,6 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs * regs); asmlinkage long -sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs) -{ - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); -#ifdef DEBUG_SIG - printk("rt_sigsuspend savset(%lx) newset(%lx) regs(%p) rip(%lx)\n", - saveset, newset, regs, regs->rip); -#endif - regs->rax = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset)) - return -EINTR; - } -} - -asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs) { @@ -308,11 +277,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, #endif /* Set up registers for signal handler */ - { - struct exec_domain *ed = current_thread_info()->exec_domain; - if (unlikely(ed && ed->signal_invmap && sig < 32)) - sig = ed->signal_invmap[sig]; - } regs->rdi = sig; /* In case the signal handler was declared without prototypes */ regs->rax = 0; @@ -341,11 +305,11 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif - return 1; + return 0; give_sigsegv: force_sigsegv(sig, current); - return 0; + return -EFAULT; } /* @@ -408,7 +372,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, #endif ret = setup_rt_frame(sig, ka, info, oldset, regs); - if (ret) { + if (ret == 0) { spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NODEFER)) @@ -425,11 +389,12 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ -int do_signal(struct pt_regs *regs, sigset_t *oldset) +static void do_signal(struct pt_regs *regs) { struct k_sigaction ka; siginfo_t info; int signr; + sigset_t *oldset; /* * We want the common case to go fast, which @@ -438,9 +403,11 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) * if so. */ if (!user_mode(regs)) - return 1; + return; - if (!oldset) + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); @@ -454,30 +421,46 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) set_debugreg(current->thread.debugreg7, 7); /* Whee! Actually deliver the signal. */ - return handle_signal(signr, &info, &ka, oldset, regs); + if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + clear_thread_flag(TIF_RESTORE_SIGMASK); + } + return; } /* Did we come from a system call? */ if ((long)regs->orig_rax >= 0) { /* Restart the system call - no handlers present */ long res = regs->rax; - if (res == -ERESTARTNOHAND || - res == -ERESTARTSYS || - res == -ERESTARTNOINTR) { + switch (res) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: regs->rax = regs->orig_rax; regs->rip -= 2; - } - if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) { + break; + case -ERESTART_RESTARTBLOCK: regs->rax = test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall; regs->rip -= 2; + break; } } - return 0; + + /* if there's no signal to deliver, we just put the saved sigmask + back. */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } } -void do_notify_resume(struct pt_regs *regs, sigset_t *oldset, __u32 thread_info_flags) +void +do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) { #ifdef DEBUG_SIG printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%lx pending:%lx\n", @@ -491,8 +474,8 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset, __u32 thread_info_ } /* deal with pending signal delivery */ - if (thread_info_flags & _TIF_SIGPENDING) - do_signal(regs,oldset); + if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK)) + do_signal(regs); } void signal_fault(struct pt_regs *regs, void __user *frame, char *where) diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 06af6ca60129..4f67697f5036 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -522,26 +522,3 @@ asmlinkage void smp_call_function_interrupt(void) } } -int safe_smp_processor_id(void) -{ - unsigned apicid, i; - - if (disable_apic) - return 0; - - apicid = hard_smp_processor_id(); - if (apicid < NR_CPUS && x86_cpu_to_apicid[apicid] == apicid) - return apicid; - - for (i = 0; i < NR_CPUS; ++i) { - if (x86_cpu_to_apicid[i] == apicid) - return i; - } - - /* No entries in x86_cpu_to_apicid? Either no MPS|ACPI, - * or called too early. Either way, we must be CPU 0. */ - if (x86_cpu_to_apicid[0] == BAD_APICID) - return 0; - - return 0; /* Should not happen */ -} diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 3ae9ffddddc0..7b7a6870288a 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -1091,7 +1091,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* * Switch from PIC to APIC mode. */ - connect_bsp_APIC(); setup_local_APIC(); if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) { @@ -1176,12 +1175,9 @@ int __cpuinit __cpu_up(unsigned int cpu) void __init smp_cpus_done(unsigned int max_cpus) { smp_cleanup_boot(); - -#ifdef CONFIG_X86_IO_APIC setup_ioapic_dest(); -#endif - check_nmi_watchdog(); + time_init_gtod(); } #ifdef CONFIG_HOTPLUG_CPU @@ -1234,6 +1230,8 @@ int __cpu_disable(void) if (cpu == 0) return -EBUSY; + if (nmi_watchdog == NMI_LOCAL_APIC) + stop_apic_nmi_watchdog(NULL); clear_local_APIC(); /* @@ -1273,11 +1271,11 @@ void __cpu_die(unsigned int cpu) printk(KERN_ERR "CPU %u didn't die...\n", cpu); } -__init int setup_additional_cpus(char *s) +static __init int setup_additional_cpus(char *s) { - return get_option(&s, &additional_cpus); + return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL; } -__setup("additional_cpus=", setup_additional_cpus); +early_param("additional_cpus", setup_additional_cpus); #else /* ... !CONFIG_HOTPLUG_CPU */ diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86_64/kernel/stacktrace.c index 32cf55eb9af8..6026b31d037e 100644 --- a/arch/x86_64/kernel/stacktrace.c +++ b/arch/x86_64/kernel/stacktrace.c @@ -7,215 +7,49 @@ */ #include <linux/sched.h> #include <linux/stacktrace.h> +#include <linux/module.h> +#include <asm/stacktrace.h> -#include <asm/smp.h> - -static inline int -in_range(unsigned long start, unsigned long addr, unsigned long end) +static void save_stack_warning(void *data, char *msg) { - return addr >= start && addr <= end; } -static unsigned long -get_stack_end(struct task_struct *task, unsigned long stack) +static void +save_stack_warning_symbol(void *data, char *msg, unsigned long symbol) { - unsigned long stack_start, stack_end, flags; - int i, cpu; - - /* - * The most common case is that we are in the task stack: - */ - stack_start = (unsigned long)task->thread_info; - stack_end = stack_start + THREAD_SIZE; - - if (in_range(stack_start, stack, stack_end)) - return stack_end; - - /* - * We are in an interrupt if irqstackptr is set: - */ - raw_local_irq_save(flags); - cpu = safe_smp_processor_id(); - stack_end = (unsigned long)cpu_pda(cpu)->irqstackptr; - - if (stack_end) { - stack_start = stack_end & ~(IRQSTACKSIZE-1); - if (in_range(stack_start, stack, stack_end)) - goto out_restore; - /* - * We get here if we are in an IRQ context but we - * are also in an exception stack. - */ - } - - /* - * Iterate over all exception stacks, and figure out whether - * 'stack' is in one of them: - */ - for (i = 0; i < N_EXCEPTION_STACKS; i++) { - /* - * set 'end' to the end of the exception stack. - */ - stack_end = per_cpu(init_tss, cpu).ist[i]; - stack_start = stack_end - EXCEPTION_STKSZ; - - /* - * Is 'stack' above this exception frame's end? - * If yes then skip to the next frame. - */ - if (stack >= stack_end) - continue; - /* - * Is 'stack' above this exception frame's start address? - * If yes then we found the right frame. - */ - if (stack >= stack_start) - goto out_restore; - - /* - * If this is a debug stack, and if it has a larger size than - * the usual exception stacks, then 'stack' might still - * be within the lower portion of the debug stack: - */ -#if DEBUG_STKSZ > EXCEPTION_STKSZ - if (i == DEBUG_STACK - 1 && stack >= stack_end - DEBUG_STKSZ) { - /* - * Black magic. A large debug stack is composed of - * multiple exception stack entries, which we - * iterate through now. Dont look: - */ - do { - stack_end -= EXCEPTION_STKSZ; - stack_start -= EXCEPTION_STKSZ; - } while (stack < stack_start); - - goto out_restore; - } -#endif - } - /* - * Ok, 'stack' is not pointing to any of the system stacks. - */ - stack_end = 0; - -out_restore: - raw_local_irq_restore(flags); - - return stack_end; } - -/* - * Save stack-backtrace addresses into a stack_trace buffer: - */ -static inline unsigned long -save_context_stack(struct stack_trace *trace, unsigned int skip, - unsigned long stack, unsigned long stack_end) +static int save_stack_stack(void *data, char *name) { - unsigned long addr; - -#ifdef CONFIG_FRAME_POINTER - unsigned long prev_stack = 0; + struct stack_trace *trace = (struct stack_trace *)data; + return trace->all_contexts ? 0 : -1; +} - while (in_range(prev_stack, stack, stack_end)) { - pr_debug("stack: %p\n", (void *)stack); - addr = (unsigned long)(((unsigned long *)stack)[1]); - pr_debug("addr: %p\n", (void *)addr); - if (!skip) - trace->entries[trace->nr_entries++] = addr-1; - else - skip--; - if (trace->nr_entries >= trace->max_entries) - break; - if (!addr) - return 0; - /* - * Stack frames must go forwards (otherwise a loop could - * happen if the stackframe is corrupted), so we move - * prev_stack forwards: - */ - prev_stack = stack; - stack = (unsigned long)(((unsigned long *)stack)[0]); - } - pr_debug("invalid: %p\n", (void *)stack); -#else - while (stack < stack_end) { - addr = ((unsigned long *)stack)[0]; - stack += sizeof(long); - if (__kernel_text_address(addr)) { - if (!skip) - trace->entries[trace->nr_entries++] = addr-1; - else - skip--; - if (trace->nr_entries >= trace->max_entries) - break; - } +static void save_stack_address(void *data, unsigned long addr) +{ + struct stack_trace *trace = (struct stack_trace *)data; + if (trace->skip > 0) { + trace->skip--; + return; } -#endif - return stack; + if (trace->nr_entries < trace->max_entries - 1) + trace->entries[trace->nr_entries++] = addr; } -#define MAX_STACKS 10 +static struct stacktrace_ops save_stack_ops = { + .warning = save_stack_warning, + .warning_symbol = save_stack_warning_symbol, + .stack = save_stack_stack, + .address = save_stack_address, +}; /* * Save stack-backtrace addresses into a stack_trace buffer. - * If all_contexts is set, all contexts (hardirq, softirq and process) - * are saved. If not set then only the current context is saved. */ -void save_stack_trace(struct stack_trace *trace, - struct task_struct *task, int all_contexts, - unsigned int skip) +void save_stack_trace(struct stack_trace *trace, struct task_struct *task) { - unsigned long stack = (unsigned long)&stack; - int i, nr_stacks = 0, stacks_done[MAX_STACKS]; - - WARN_ON(trace->nr_entries || !trace->max_entries); - - if (!task) - task = current; - - pr_debug("task: %p, ti: %p\n", task, task->thread_info); - - if (!task || task == current) { - /* Grab rbp right from our regs: */ - asm ("mov %%rbp, %0" : "=r" (stack)); - pr_debug("rbp: %p\n", (void *)stack); - } else { - /* rbp is the last reg pushed by switch_to(): */ - stack = task->thread.rsp; - pr_debug("other task rsp: %p\n", (void *)stack); - stack = (unsigned long)(((unsigned long *)stack)[0]); - pr_debug("other task rbp: %p\n", (void *)stack); - } - - while (1) { - unsigned long stack_end = get_stack_end(task, stack); - - pr_debug("stack: %p\n", (void *)stack); - pr_debug("stack end: %p\n", (void *)stack_end); - - /* - * Invalid stack addres? - */ - if (!stack_end) - return; - /* - * Were we in this stack already? (recursion) - */ - for (i = 0; i < nr_stacks; i++) - if (stacks_done[i] == stack_end) - return; - stacks_done[nr_stacks] = stack_end; - - stack = save_context_stack(trace, skip, stack, stack_end); - if (!all_contexts || !stack || - trace->nr_entries >= trace->max_entries) - return; - trace->entries[trace->nr_entries++] = ULONG_MAX; - if (trace->nr_entries >= trace->max_entries) - return; - if (++nr_stacks >= MAX_STACKS) - return; - } + dump_trace(task, NULL, NULL, &save_stack_ops, trace); + trace->entries[trace->nr_entries++] = ULONG_MAX; } +EXPORT_SYMBOL(save_stack_trace); diff --git a/arch/x86_64/kernel/tce.c b/arch/x86_64/kernel/tce.c index 5530dda3f27a..cbabfdf78e06 100644 --- a/arch/x86_64/kernel/tce.c +++ b/arch/x86_64/kernel/tce.c @@ -1,4 +1,6 @@ /* + * This file manages the translation entries for the IBM Calgary IOMMU. + * * Derived from arch/powerpc/platforms/pseries/iommu.c * * Copyright (C) IBM Corporation, 2006 @@ -104,14 +106,6 @@ static int tce_table_setparms(struct pci_dev *dev, struct iommu_table *tbl) /* set the tce table size - measured in entries */ tbl->it_size = table_size_to_number_of_entries(specified_table_size); - tbl->it_base = (unsigned long)tce_table_kva[dev->bus->number]; - if (!tbl->it_base) { - printk(KERN_ERR "Calgary: iommu_table_setparms: " - "no table allocated?!\n"); - ret = -ENOMEM; - goto done; - } - /* * number of bytes needed for the bitmap size in number of * entries; we need one bit per entry @@ -160,8 +154,6 @@ int build_tce_table(struct pci_dev *dev, void __iomem *bbar) if (ret) goto free_tbl; - tce_free(tbl, 0, tbl->it_size); - tbl->bbar = bbar; /* diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 7700e6cd2bd9..1c255ee76e7c 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -24,6 +24,8 @@ #include <linux/device.h> #include <linux/sysdev.h> #include <linux/bcd.h> +#include <linux/notifier.h> +#include <linux/cpu.h> #include <linux/kallsyms.h> #include <linux/acpi.h> #ifdef CONFIG_ACPI @@ -39,9 +41,7 @@ #include <asm/sections.h> #include <linux/cpufreq.h> #include <linux/hpet.h> -#ifdef CONFIG_X86_LOCAL_APIC #include <asm/apic.h> -#endif #ifdef CONFIG_CPU_FREQ static void cpufreq_delayed_get(void); @@ -49,7 +49,7 @@ static void cpufreq_delayed_get(void); extern void i8254_timer_resume(void); extern int using_apic_timer; -static char *time_init_gtod(void); +static char *timename = NULL; DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); @@ -187,20 +187,15 @@ unsigned long profile_pc(struct pt_regs *regs) { unsigned long pc = instruction_pointer(regs); - /* Assume the lock function has either no stack frame or only a single - word. This checks if the address on the stack looks like a kernel - text address. - There is a small window for false hits, but in that case the tick - is just accounted to the spinlock function. - Better would be to write these functions in assembler again - and check exactly. */ + /* Assume the lock function has either no stack frame or a copy + of eflags from PUSHF + Eflags always has bits 22 and up cleared unlike kernel addresses. */ if (!user_mode(regs) && in_lock_functions(pc)) { - char *v = *(char **)regs->rsp; - if ((v >= _stext && v <= _etext) || - (v >= _sinittext && v <= _einittext) || - (v >= (char *)MODULES_VADDR && v <= (char *)MODULES_END)) - return (unsigned long)v; - return ((unsigned long *)regs->rsp)[1]; + unsigned long *sp = (unsigned long *)regs->rsp; + if (sp[0] >> 22) + return sp[0]; + if (sp[1] >> 22) + return sp[1]; } return pc; } @@ -281,6 +276,7 @@ static void set_rtc_mmss(unsigned long nowtime) * Note: This function is required to return accurate * time even in the absence of multiple timer ticks. */ +static inline unsigned long long cycles_2_ns(unsigned long long cyc); unsigned long long monotonic_clock(void) { unsigned long seq; @@ -305,8 +301,7 @@ unsigned long long monotonic_clock(void) base = monotonic_base; } while (read_seqretry(&xtime_lock, seq)); this_offset = get_cycles_sync(); - /* FIXME: 1000 or 1000000? */ - offset = (this_offset - last_offset)*1000 / cpu_khz; + offset = cycles_2_ns(this_offset - last_offset); } return base + offset; } @@ -410,8 +405,7 @@ void main_timer_handler(struct pt_regs *regs) offset %= USEC_PER_TICK; } - /* FIXME: 1000 or 1000000? */ - monotonic_base += (tsc - vxtime.last_tsc) * 1000000 / cpu_khz; + monotonic_base += cycles_2_ns(tsc - vxtime.last_tsc); vxtime.last_tsc = tsc - vxtime.quot * delay / vxtime.tsc_quot; @@ -441,12 +435,8 @@ void main_timer_handler(struct pt_regs *regs) * have to call the local interrupt handler. */ -#ifndef CONFIG_X86_LOCAL_APIC - profile_tick(CPU_PROFILING, regs); -#else if (!using_apic_timer) smp_local_timer_interrupt(regs); -#endif /* * If we have an externally synchronized Linux clock, then update CMOS clock @@ -470,10 +460,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (apic_runs_main_timer > 1) return IRQ_HANDLED; main_timer_handler(regs); -#ifdef CONFIG_X86_LOCAL_APIC if (using_apic_timer) smp_send_timer_broadcast_ipi(); -#endif return IRQ_HANDLED; } @@ -893,11 +881,17 @@ static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL }; -void __init time_init(void) +static int __cpuinit +time_cpu_notifier(struct notifier_block *nb, unsigned long action, void *hcpu) { - char *timename; - char *gtod; + unsigned cpu = (unsigned long) hcpu; + if (action == CPU_ONLINE) + vsyscall_set_cpu(cpu); + return NOTIFY_DONE; +} +void __init time_init(void) +{ if (nohpet) vxtime.hpet_address = 0; @@ -931,18 +925,17 @@ void __init time_init(void) } vxtime.mode = VXTIME_TSC; - gtod = time_init_gtod(); - - printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n", - vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod); - printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz; vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; vxtime.last_tsc = get_cycles_sync(); + set_cyc2ns_scale(cpu_khz); setup_irq(0, &irq0); + hotcpu_notifier(time_cpu_notifier, 0); + time_cpu_notifier(NULL, CPU_ONLINE, (void *)(long)smp_processor_id()); - set_cyc2ns_scale(cpu_khz); +#ifndef CONFIG_SMP + time_init_gtod(); +#endif } /* @@ -973,12 +966,18 @@ __cpuinit int unsynchronized_tsc(void) /* * Decide what mode gettimeofday should use. */ -__init static char *time_init_gtod(void) +void time_init_gtod(void) { char *timetype; if (unsynchronized_tsc()) notsc = 1; + + if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) + vgetcpu_mode = VGETCPU_RDTSCP; + else + vgetcpu_mode = VGETCPU_LSL; + if (vxtime.hpet_address && notsc) { timetype = hpet_use_timer ? "HPET" : "PIT/HPET"; if (hpet_use_timer) @@ -1001,7 +1000,16 @@ __init static char *time_init_gtod(void) timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC"; vxtime.mode = VXTIME_TSC; } - return timetype; + + printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n", + vxtime_hz / 1000000, vxtime_hz % 1000000, timename, timetype); + printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", + cpu_khz / 1000, cpu_khz % 1000); + vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz; + vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; + vxtime.last_tsc = get_cycles_sync(); + + set_cyc2ns_scale(cpu_khz); } __setup("report_lost_ticks", time_setup); @@ -1031,8 +1039,16 @@ static int timer_resume(struct sys_device *dev) unsigned long flags; unsigned long sec; unsigned long ctime = get_cmos_time(); - unsigned long sleep_length = (ctime - sleep_start) * HZ; + long sleep_length = (ctime - sleep_start) * HZ; + if (sleep_length < 0) { + printk(KERN_WARNING "Time skew detected in timer resume!\n"); + /* The time after the resume must not be earlier than the time + * before the suspend or some nasty things will happen + */ + sleep_length = 0; + ctime = sleep_start; + } if (vxtime.hpet_address) hpet_reenable(); else diff --git a/arch/x86_64/kernel/trampoline.S b/arch/x86_64/kernel/trampoline.S index 23a03eb91fc7..c79b99a9e2f6 100644 --- a/arch/x86_64/kernel/trampoline.S +++ b/arch/x86_64/kernel/trampoline.S @@ -64,7 +64,7 @@ idt_48: .word 0, 0 # idt base = 0L gdt_48: - .short __KERNEL32_CS + 7 # gdt limit + .short GDT_ENTRIES*8 - 1 # gdt limit .long cpu_gdt_table-__START_KERNEL_map .globl trampoline_end diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index b1249774d1e8..01f2a8d254c2 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -45,6 +45,7 @@ #include <asm/pda.h> #include <asm/proto.h> #include <asm/nmi.h> +#include <asm/stacktrace.h> asmlinkage void divide_error(void); asmlinkage void debug(void); @@ -142,7 +143,7 @@ void printk_address(unsigned long address) #endif static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, - unsigned *usedp, const char **idp) + unsigned *usedp, char **idp) { static char ids[][8] = { [DEBUG_STACK - 1] = "#DB", @@ -161,26 +162,7 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, * 'stack' is in one of them: */ for (k = 0; k < N_EXCEPTION_STACKS; k++) { - unsigned long end; - - /* - * set 'end' to the end of the exception stack. - */ - switch (k + 1) { - /* - * TODO: this block is not needed i think, because - * setup64.c:cpu_init() sets up t->ist[DEBUG_STACK] - * properly too. - */ -#if DEBUG_STKSZ > EXCEPTION_STKSZ - case DEBUG_STACK: - end = cpu_pda(cpu)->debugstack + DEBUG_STKSZ; - break; -#endif - default: - end = per_cpu(orig_ist, cpu).ist[k]; - break; - } + unsigned long end = per_cpu(orig_ist, cpu).ist[k]; /* * Is 'stack' above this exception frame's end? * If yes then skip to the next frame. @@ -234,13 +216,19 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, return NULL; } -static int show_trace_unwind(struct unwind_frame_info *info, void *context) +struct ops_and_data { + struct stacktrace_ops *ops; + void *data; +}; + +static int dump_trace_unwind(struct unwind_frame_info *info, void *context) { + struct ops_and_data *oad = (struct ops_and_data *)context; int n = 0; while (unwind(info) == 0 && UNW_PC(info)) { n++; - printk_address(UNW_PC(info)); + oad->ops->address(oad->data, UNW_PC(info)); if (arch_unw_user_mode(info)) break; } @@ -254,45 +242,53 @@ static int show_trace_unwind(struct unwind_frame_info *info, void *context) * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack */ -void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * stack) +void dump_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * stack, + struct stacktrace_ops *ops, void *data) { - const unsigned cpu = safe_smp_processor_id(); + const unsigned cpu = smp_processor_id(); unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr; unsigned used = 0; - printk("\nCall Trace:\n"); - if (!tsk) tsk = current; if (call_trace >= 0) { int unw_ret = 0; struct unwind_frame_info info; + struct ops_and_data oad = { .ops = ops, .data = data }; if (regs) { if (unwind_init_frame_info(&info, tsk, regs) == 0) - unw_ret = show_trace_unwind(&info, NULL); + unw_ret = dump_trace_unwind(&info, &oad); } else if (tsk == current) - unw_ret = unwind_init_running(&info, show_trace_unwind, NULL); + unw_ret = unwind_init_running(&info, dump_trace_unwind, &oad); else { if (unwind_init_blocked(&info, tsk) == 0) - unw_ret = show_trace_unwind(&info, NULL); + unw_ret = dump_trace_unwind(&info, &oad); } if (unw_ret > 0) { if (call_trace == 1 && !arch_unw_user_mode(&info)) { - print_symbol("DWARF2 unwinder stuck at %s\n", + ops->warning_symbol(data, "DWARF2 unwinder stuck at %s\n", UNW_PC(&info)); if ((long)UNW_SP(&info) < 0) { - printk("Leftover inexact backtrace:\n"); + ops->warning(data, "Leftover inexact backtrace:\n"); stack = (unsigned long *)UNW_SP(&info); + if (!stack) + return; } else - printk("Full inexact backtrace again:\n"); + ops->warning(data, "Full inexact backtrace again:\n"); } else if (call_trace >= 1) return; else - printk("Full inexact backtrace again:\n"); + ops->warning(data, "Full inexact backtrace again:\n"); } else - printk("Inexact backtrace:\n"); + ops->warning(data, "Inexact backtrace:\n"); + } + if (!stack) { + unsigned long dummy; + stack = &dummy; + if (tsk && tsk != current) + stack = (unsigned long *)tsk->thread.rsp; } /* @@ -303,7 +299,9 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s #define HANDLE_STACK(cond) \ do while (cond) { \ unsigned long addr = *stack++; \ - if (kernel_text_address(addr)) { \ + if (oops_in_progress ? \ + __kernel_text_address(addr) : \ + kernel_text_address(addr)) { \ /* \ * If the address is either in the text segment of the \ * kernel, or in the region which contains vmalloc'ed \ @@ -312,7 +310,7 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s * down the cause of the crash will be able to figure \ * out the call path that was taken. \ */ \ - printk_address(addr); \ + ops->address(data, addr); \ } \ } while (0) @@ -321,16 +319,17 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s * current stack address. If the stacks consist of nested * exceptions */ - for ( ; ; ) { - const char *id; + for (;;) { + char *id; unsigned long *estack_end; estack_end = in_exception_stack(cpu, (unsigned long)stack, &used, &id); if (estack_end) { - printk(" <%s>", id); + if (ops->stack(data, id) < 0) + break; HANDLE_STACK (stack < estack_end); - printk(" <EOE>"); + ops->stack(data, "<EOE>"); /* * We link to the next stack via the * second-to-last pointer (index -2 to end) in the @@ -345,7 +344,8 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s (IRQSTACKSIZE - 64) / sizeof(*irqstack); if (stack >= irqstack && stack < irqstack_end) { - printk(" <IRQ>"); + if (ops->stack(data, "IRQ") < 0) + break; HANDLE_STACK (stack < irqstack_end); /* * We link to the next stack (which would be @@ -354,7 +354,7 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s */ stack = (unsigned long *) (irqstack_end[-1]); irqstack_end = NULL; - printk(" <EOI>"); + ops->stack(data, "EOI"); continue; } } @@ -362,19 +362,57 @@ void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s } /* - * This prints the process stack: + * This handles the process stack: */ HANDLE_STACK (((long) stack & (THREAD_SIZE-1)) != 0); #undef HANDLE_STACK +} +EXPORT_SYMBOL(dump_trace); + +static void +print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) +{ + print_symbol(msg, symbol); + printk("\n"); +} + +static void print_trace_warning(void *data, char *msg) +{ + printk("%s\n", msg); +} + +static int print_trace_stack(void *data, char *name) +{ + printk(" <%s> ", name); + return 0; +} + +static void print_trace_address(void *data, unsigned long addr) +{ + printk_address(addr); +} + +static struct stacktrace_ops print_trace_ops = { + .warning = print_trace_warning, + .warning_symbol = print_trace_warning_symbol, + .stack = print_trace_stack, + .address = print_trace_address, +}; +void +show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack) +{ + printk("\nCall Trace:\n"); + dump_trace(tsk, regs, stack, &print_trace_ops, NULL); printk("\n"); } -static void _show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long * rsp) +static void +_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *rsp) { unsigned long *stack; int i; - const int cpu = safe_smp_processor_id(); + const int cpu = smp_processor_id(); unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr); unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); @@ -428,7 +466,7 @@ void show_registers(struct pt_regs *regs) int i; int in_kernel = !user_mode(regs); unsigned long rsp; - const int cpu = safe_smp_processor_id(); + const int cpu = smp_processor_id(); struct task_struct *cur = cpu_pda(cpu)->pcurrent; rsp = regs->rsp; @@ -503,9 +541,11 @@ static unsigned int die_nest_count; unsigned __kprobes long oops_begin(void) { - int cpu = safe_smp_processor_id(); + int cpu = smp_processor_id(); unsigned long flags; + oops_enter(); + /* racy, but better than risking deadlock. */ local_irq_save(flags); if (!spin_trylock(&die_lock)) { @@ -534,6 +574,7 @@ void __kprobes oops_end(unsigned long flags) spin_unlock_irqrestore(&die_lock, flags); if (panic_on_oops) panic("Fatal exception"); + oops_exit(); } void __kprobes __die(const char * str, struct pt_regs * regs, long err) @@ -570,7 +611,7 @@ void die(const char * str, struct pt_regs * regs, long err) do_exit(SIGSEGV); } -void __kprobes die_nmi(char *str, struct pt_regs *regs) +void __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) { unsigned long flags = oops_begin(); @@ -578,13 +619,12 @@ void __kprobes die_nmi(char *str, struct pt_regs *regs) * We are in trouble anyway, lets at least try * to get a message out. */ - printk(str, safe_smp_processor_id()); + printk(str, smp_processor_id()); show_registers(regs); if (kexec_should_crash(current)) crash_kexec(regs); - if (panic_on_timeout || panic_on_oops) - panic("nmi watchdog"); - printk("console shuts up ...\n"); + if (do_panic || panic_on_oops) + panic("Non maskable interrupt"); oops_end(flags); nmi_exit(); local_irq_enable(); @@ -730,8 +770,15 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, static __kprobes void mem_parity_error(unsigned char reason, struct pt_regs * regs) { - printk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n"); - printk("You probably have a hardware problem with your RAM chips\n"); + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", + reason); + printk(KERN_EMERG "You probably have a hardware problem with your " + "RAM chips\n"); + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); /* Clear and disable the memory parity error line. */ reason = (reason & 0xf) | 4; @@ -754,9 +801,15 @@ io_check_error(unsigned char reason, struct pt_regs * regs) static __kprobes void unknown_nmi_error(unsigned char reason, struct pt_regs * regs) -{ printk("Uhhuh. NMI received for unknown reason %02x.\n", reason); - printk("Dazed and confused, but trying to continue\n"); - printk("Do you have a strange power saving mode enabled?\n"); +{ + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", + reason); + printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); } /* Runs on IST stack. This code must keep interrupts off all the time. @@ -776,17 +829,15 @@ asmlinkage __kprobes void default_do_nmi(struct pt_regs *regs) if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; -#ifdef CONFIG_X86_LOCAL_APIC /* * Ok, so this is none of the documented NMI sources, * so it must be the NMI watchdog. */ - if (nmi_watchdog > 0) { - nmi_watchdog_tick(regs,reason); + if (nmi_watchdog_tick(regs,reason)) return; - } -#endif - unknown_nmi_error(reason, regs); + if (!do_nmi_callback(regs,cpu)) + unknown_nmi_error(reason, regs); + return; } if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) @@ -1071,6 +1122,7 @@ asmlinkage void math_state_restore(void) init_fpu(me); restore_fpu_checking(&me->thread.i387.fxsave); task_thread_info(me)->status |= TS_USEDFPU; + me->fpu_counter++; } void __init trap_init(void) @@ -1109,24 +1161,30 @@ void __init trap_init(void) } -/* Actual parsing is done early in setup.c. */ -static int __init oops_dummy(char *s) +static int __init oops_setup(char *s) { - panic_on_oops = 1; - return 1; + if (!s) + return -EINVAL; + if (!strcmp(s, "panic")) + panic_on_oops = 1; + return 0; } -__setup("oops=", oops_dummy); +early_param("oops", oops_setup); static int __init kstack_setup(char *s) { + if (!s) + return -EINVAL; kstack_depth_to_print = simple_strtoul(s,NULL,0); - return 1; + return 0; } -__setup("kstack=", kstack_setup); +early_param("kstack", kstack_setup); #ifdef CONFIG_STACK_UNWIND static int __init call_trace_setup(char *s) { + if (!s) + return -EINVAL; if (strcmp(s, "old") == 0) call_trace = -1; else if (strcmp(s, "both") == 0) @@ -1135,7 +1193,7 @@ static int __init call_trace_setup(char *s) call_trace = 1; else if (strcmp(s, "new") == 0) call_trace = 2; - return 1; + return 0; } -__setup("call_trace=", call_trace_setup); +early_param("call_trace", call_trace_setup); #endif diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 7c4de31471d4..d0564f1bcb0b 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -13,6 +13,12 @@ OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") OUTPUT_ARCH(i386:x86-64) ENTRY(phys_startup_64) jiffies_64 = jiffies; +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ + user PT_LOAD FLAGS(7); /* RWE */ + note PT_NOTE FLAGS(4); /* R__ */ +} SECTIONS { . = __START_KERNEL; @@ -31,7 +37,7 @@ SECTIONS KPROBES_TEXT *(.fixup) *(.gnu.warning) - } = 0x9090 + } :text = 0x9090 /* out-of-line lock text */ .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET) { *(.text.lock) } @@ -57,7 +63,7 @@ SECTIONS .data : AT(ADDR(.data) - LOAD_OFFSET) { *(.data) CONSTRUCTORS - } + } :data _edata = .; /* End of data section */ @@ -89,7 +95,7 @@ SECTIONS #define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) . = VSYSCALL_ADDR; - .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } + .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user __vsyscall_0 = VSYSCALL_VIRT_ADDR; . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); @@ -99,6 +105,9 @@ SECTIONS .vxtime : AT(VLOAD(.vxtime)) { *(.vxtime) } vxtime = VVIRT(.vxtime); + .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } + vgetcpu_mode = VVIRT(.vgetcpu_mode); + .wall_jiffies : AT(VLOAD(.wall_jiffies)) { *(.wall_jiffies) } wall_jiffies = VVIRT(.wall_jiffies); @@ -132,7 +141,7 @@ SECTIONS . = ALIGN(8192); /* init_task */ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { *(.data.init_task) - } + } :data . = ALIGN(4096); .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { @@ -207,14 +216,12 @@ SECTIONS __initramfs_start = .; .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } __initramfs_end = .; - /* temporary here to work around NR_CPUS. If you see this comment in 2.6.17+ - complain */ - . = ALIGN(4096); - __init_end = .; - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); __per_cpu_start = .; .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) } __per_cpu_end = .; + . = ALIGN(4096); + __init_end = .; . = ALIGN(4096); __nosave_begin = .; diff --git a/arch/x86_64/kernel/vsmp.c b/arch/x86_64/kernel/vsmp.c index 92f70c74965f..044e852bd25e 100644 --- a/arch/x86_64/kernel/vsmp.c +++ b/arch/x86_64/kernel/vsmp.c @@ -20,6 +20,9 @@ static int __init vsmp_init(void) void *address; unsigned int cap, ctl; + if (!early_pci_allowed()) + return 0; + /* Check if we are running on a ScaleMP vSMP box */ if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) != PCI_VENDOR_ID_SCALEMP) || (read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) != PCI_DEVICE_ID_SCALEMP_VSMP_CTL)) diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index f603037df162..ac48c3857ddb 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -26,6 +26,7 @@ #include <linux/seqlock.h> #include <linux/jiffies.h> #include <linux/sysctl.h> +#include <linux/getcpu.h> #include <asm/vsyscall.h> #include <asm/pgtable.h> @@ -33,11 +34,15 @@ #include <asm/fixmap.h> #include <asm/errno.h> #include <asm/io.h> +#include <asm/segment.h> +#include <asm/desc.h> +#include <asm/topology.h> #define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) int __sysctl_vsyscall __section_sysctl_vsyscall = 1; seqlock_t __xtime_lock __section_xtime_lock = SEQLOCK_UNLOCKED; +int __vgetcpu_mode __section_vgetcpu_mode; #include <asm/unistd.h> @@ -72,7 +77,8 @@ static __always_inline void do_vgettimeofday(struct timeval * tv) __vxtime.tsc_quot) >> 32; /* See comment in x86_64 do_gettimeofday. */ } else { - usec += ((readl((void *)fix_to_virt(VSYSCALL_HPET) + 0xf0) - + usec += ((readl((void __iomem *) + fix_to_virt(VSYSCALL_HPET) + 0xf0) - __vxtime.last) * __vxtime.quot) >> 32; } } while (read_seqretry(&__xtime_lock, sequence)); @@ -127,9 +133,46 @@ time_t __vsyscall(1) vtime(time_t *t) return __xtime.tv_sec; } -long __vsyscall(2) venosys_0(void) +/* Fast way to get current CPU and node. + This helps to do per node and per CPU caches in user space. + The result is not guaranteed without CPU affinity, but usually + works out because the scheduler tries to keep a thread on the same + CPU. + + tcache must point to a two element sized long array. + All arguments can be NULL. */ +long __vsyscall(2) +vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) { - return -ENOSYS; + unsigned int dummy, p; + unsigned long j = 0; + + /* Fast cache - only recompute value once per jiffies and avoid + relatively costly rdtscp/cpuid otherwise. + This works because the scheduler usually keeps the process + on the same CPU and this syscall doesn't guarantee its + results anyways. + We do this here because otherwise user space would do it on + its own in a likely inferior way (no access to jiffies). + If you don't like it pass NULL. */ + if (tcache && tcache->t0 == (j = __jiffies)) { + p = tcache->t1; + } else if (__vgetcpu_mode == VGETCPU_RDTSCP) { + /* Load per CPU data from RDTSCP */ + rdtscp(dummy, dummy, p); + } else { + /* Load per CPU data from GDT */ + asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG)); + } + if (tcache) { + tcache->t0 = j; + tcache->t1 = p; + } + if (cpu) + *cpu = p & 0xfff; + if (node) + *node = p >> 12; + return 0; } long __vsyscall(3) venosys_1(void) @@ -149,7 +192,8 @@ static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, void __user *buffer, size_t *lenp, loff_t *ppos) { extern u16 vsysc1, vsysc2; - u16 *map1, *map2; + u16 __iomem *map1; + u16 __iomem *map2; int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos); if (!write) return ret; @@ -164,11 +208,11 @@ static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, goto out; } if (!sysctl_vsyscall) { - *map1 = SYSCALL; - *map2 = SYSCALL; + writew(SYSCALL, map1); + writew(SYSCALL, map2); } else { - *map1 = NOP2; - *map2 = NOP2; + writew(NOP2, map1); + writew(NOP2, map2); } iounmap(map2); out: @@ -200,6 +244,43 @@ static ctl_table kernel_root_table2[] = { #endif +static void __cpuinit write_rdtscp_cb(void *info) +{ + write_rdtscp_aux((unsigned long)info); +} + +void __cpuinit vsyscall_set_cpu(int cpu) +{ + unsigned long *d; + unsigned long node = 0; +#ifdef CONFIG_NUMA + node = cpu_to_node[cpu]; +#endif + if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP)) { + void *info = (void *)((node << 12) | cpu); + /* Can happen on preemptive kernel */ + if (get_cpu() == cpu) + write_rdtscp_cb(info); +#ifdef CONFIG_SMP + else { + /* the notifier is unfortunately not executed on the + target CPU */ + smp_call_function_single(cpu,write_rdtscp_cb,info,0,1); + } +#endif + put_cpu(); + } + + /* Store cpu number in limit so that it can be loaded quickly + in user space in vgetcpu. + 12 bits for the CPU and 8 bits for the node. */ + d = (unsigned long *)(cpu_gdt(cpu) + GDT_ENTRY_PER_CPU); + *d = 0x0f40000000000ULL; + *d |= cpu; + *d |= (node & 0xf) << 12; + *d |= (node >> 4) << 48; +} + static void __init map_vsyscall(void) { extern char __vsyscall_0; @@ -214,6 +295,7 @@ static int __init vsyscall_init(void) VSYSCALL_ADDR(__NR_vgettimeofday))); BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime)); BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE))); + BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu)); map_vsyscall(); #ifdef CONFIG_SYSCTL register_sysctl_table(kernel_root_table2, 0); diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 370952c4ff22..c3454af5e3a2 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -29,6 +29,7 @@ EXPORT_SYMBOL(__put_user_8); EXPORT_SYMBOL(copy_user_generic); EXPORT_SYMBOL(copy_from_user); EXPORT_SYMBOL(copy_to_user); +EXPORT_SYMBOL(__copy_from_user_inatomic); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile index ccef6ae747a3..b78d4170fce2 100644 --- a/arch/x86_64/lib/Makefile +++ b/arch/x86_64/lib/Makefile @@ -9,4 +9,4 @@ obj-y := io.o iomap_copy.o lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \ usercopy.o getuser.o putuser.o \ thunk.o clear_page.o copy_page.o bitstr.o bitops.o -lib-y += memcpy.o memmove.o memset.o copy_user.o +lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o diff --git a/arch/x86_64/lib/clear_page.S b/arch/x86_64/lib/clear_page.S index 1f81b79b796c..9a10a78bb4a4 100644 --- a/arch/x86_64/lib/clear_page.S +++ b/arch/x86_64/lib/clear_page.S @@ -1,10 +1,22 @@ +#include <linux/linkage.h> +#include <asm/dwarf2.h> + /* * Zero a page. * rdi page */ - .globl clear_page - .p2align 4 -clear_page: + ALIGN +clear_page_c: + CFI_STARTPROC + movl $4096/8,%ecx + xorl %eax,%eax + rep stosq + ret + CFI_ENDPROC +ENDPROC(clear_page) + +ENTRY(clear_page) + CFI_STARTPROC xorl %eax,%eax movl $4096/64,%ecx .p2align 4 @@ -23,28 +35,25 @@ clear_page: jnz .Lloop nop ret -clear_page_end: + CFI_ENDPROC +.Lclear_page_end: +ENDPROC(clear_page) /* Some CPUs run faster using the string instructions. It is also a lot simpler. Use this when possible */ #include <asm/cpufeature.h> + .section .altinstr_replacement,"ax" +1: .byte 0xeb /* jmp <disp8> */ + .byte (clear_page_c - clear_page) - (2f - 1b) /* offset */ +2: + .previous .section .altinstructions,"a" .align 8 - .quad clear_page - .quad clear_page_c - .byte X86_FEATURE_REP_GOOD - .byte clear_page_end-clear_page - .byte clear_page_c_end-clear_page_c - .previous - - .section .altinstr_replacement,"ax" -clear_page_c: - movl $4096/8,%ecx - xorl %eax,%eax - rep - stosq - ret -clear_page_c_end: + .quad clear_page + .quad 1b + .byte X86_FEATURE_REP_GOOD + .byte .Lclear_page_end - clear_page + .byte 2b - 1b .previous diff --git a/arch/x86_64/lib/copy_page.S b/arch/x86_64/lib/copy_page.S index 8fa19d96a7ee..0ebb03b60e79 100644 --- a/arch/x86_64/lib/copy_page.S +++ b/arch/x86_64/lib/copy_page.S @@ -1,17 +1,33 @@ /* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */ +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/dwarf2.h> + + ALIGN +copy_page_c: + CFI_STARTPROC + movl $4096/8,%ecx + rep movsq + ret + CFI_ENDPROC +ENDPROC(copy_page_c) + /* Don't use streaming store because it's better when the target ends up in cache. */ /* Could vary the prefetch distance based on SMP/UP */ - .globl copy_page - .p2align 4 -copy_page: +ENTRY(copy_page) + CFI_STARTPROC subq $3*8,%rsp + CFI_ADJUST_CFA_OFFSET 3*8 movq %rbx,(%rsp) + CFI_REL_OFFSET rbx, 0 movq %r12,1*8(%rsp) + CFI_REL_OFFSET r12, 1*8 movq %r13,2*8(%rsp) + CFI_REL_OFFSET r13, 2*8 movl $(4096/64)-5,%ecx .p2align 4 @@ -72,30 +88,33 @@ copy_page: jnz .Loop2 movq (%rsp),%rbx + CFI_RESTORE rbx movq 1*8(%rsp),%r12 + CFI_RESTORE r12 movq 2*8(%rsp),%r13 + CFI_RESTORE r13 addq $3*8,%rsp + CFI_ADJUST_CFA_OFFSET -3*8 ret +.Lcopy_page_end: + CFI_ENDPROC +ENDPROC(copy_page) /* Some CPUs run faster using the string copy instructions. It is also a lot simpler. Use this when possible */ #include <asm/cpufeature.h> + .section .altinstr_replacement,"ax" +1: .byte 0xeb /* jmp <disp8> */ + .byte (copy_page_c - copy_page) - (2f - 1b) /* offset */ +2: + .previous .section .altinstructions,"a" .align 8 - .quad copy_page - .quad copy_page_c - .byte X86_FEATURE_REP_GOOD - .byte copy_page_c_end-copy_page_c - .byte copy_page_c_end-copy_page_c - .previous - - .section .altinstr_replacement,"ax" -copy_page_c: - movl $4096/8,%ecx - rep - movsq - ret -copy_page_c_end: + .quad copy_page + .quad 1b + .byte X86_FEATURE_REP_GOOD + .byte .Lcopy_page_end - copy_page + .byte 2b - 1b .previous diff --git a/arch/x86_64/lib/copy_user.S b/arch/x86_64/lib/copy_user.S index f64569b83b54..70bebd310408 100644 --- a/arch/x86_64/lib/copy_user.S +++ b/arch/x86_64/lib/copy_user.S @@ -4,56 +4,78 @@ * Functions to copy from and to user space. */ +#include <linux/linkage.h> +#include <asm/dwarf2.h> + #define FIX_ALIGNMENT 1 - #include <asm/current.h> - #include <asm/asm-offsets.h> - #include <asm/thread_info.h> - #include <asm/cpufeature.h> +#include <asm/current.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/cpufeature.h> -/* Standard copy_to_user with segment limit checking */ - .globl copy_to_user - .p2align 4 -copy_to_user: - GET_THREAD_INFO(%rax) - movq %rdi,%rcx - addq %rdx,%rcx - jc bad_to_user - cmpq threadinfo_addr_limit(%rax),%rcx - jae bad_to_user -2: + .macro ALTERNATIVE_JUMP feature,orig,alt +0: .byte 0xe9 /* 32bit jump */ - .long .Lcug-1f + .long \orig-1f /* by default jump to orig */ 1: - .section .altinstr_replacement,"ax" -3: .byte 0xe9 /* replacement jmp with 8 bit immediate */ - .long copy_user_generic_c-1b /* offset */ +2: .byte 0xe9 /* near jump with 32bit immediate */ + .long \alt-1b /* offset */ /* or alternatively to alt */ .previous .section .altinstructions,"a" .align 8 + .quad 0b .quad 2b - .quad 3b - .byte X86_FEATURE_REP_GOOD + .byte \feature /* when feature is set */ .byte 5 .byte 5 .previous + .endm + +/* Standard copy_to_user with segment limit checking */ +ENTRY(copy_to_user) + CFI_STARTPROC + GET_THREAD_INFO(%rax) + movq %rdi,%rcx + addq %rdx,%rcx + jc bad_to_user + cmpq threadinfo_addr_limit(%rax),%rcx + jae bad_to_user + xorl %eax,%eax /* clear zero flag */ + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + CFI_ENDPROC + +ENTRY(copy_user_generic) + CFI_STARTPROC + movl $1,%ecx /* set zero flag */ + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + CFI_ENDPROC + +ENTRY(__copy_from_user_inatomic) + CFI_STARTPROC + xorl %ecx,%ecx /* clear zero flag */ + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + CFI_ENDPROC /* Standard copy_from_user with segment limit checking */ - .globl copy_from_user - .p2align 4 -copy_from_user: +ENTRY(copy_from_user) + CFI_STARTPROC GET_THREAD_INFO(%rax) movq %rsi,%rcx addq %rdx,%rcx jc bad_from_user cmpq threadinfo_addr_limit(%rax),%rcx jae bad_from_user - /* FALL THROUGH to copy_user_generic */ + movl $1,%ecx /* set zero flag */ + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + CFI_ENDPROC +ENDPROC(copy_from_user) .section .fixup,"ax" /* must zero dest */ bad_from_user: + CFI_STARTPROC movl %edx,%ecx xorl %eax,%eax rep @@ -61,40 +83,32 @@ bad_from_user: bad_to_user: movl %edx,%eax ret + CFI_ENDPROC +END(bad_from_user) .previous /* - * copy_user_generic - memory copy with exception handling. + * copy_user_generic_unrolled - memory copy with exception handling. + * This version is for CPUs like P4 that don't have efficient micro code for rep movsq * * Input: * rdi destination * rsi source * rdx count + * ecx zero flag -- if true zero destination on error * * Output: * eax uncopied bytes or 0 if successful. */ - .globl copy_user_generic - .p2align 4 -copy_user_generic: - .byte 0x66,0x66,0x90 /* 5 byte nop for replacement jump */ - .byte 0x66,0x90 -1: - .section .altinstr_replacement,"ax" -2: .byte 0xe9 /* near jump with 32bit immediate */ - .long copy_user_generic_c-1b /* offset */ - .previous - .section .altinstructions,"a" - .align 8 - .quad copy_user_generic - .quad 2b - .byte X86_FEATURE_REP_GOOD - .byte 5 - .byte 5 - .previous -.Lcug: +ENTRY(copy_user_generic_unrolled) + CFI_STARTPROC pushq %rbx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbx, 0 + pushq %rcx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rcx, 0 xorl %eax,%eax /*zero for the exception handler */ #ifdef FIX_ALIGNMENT @@ -168,9 +182,16 @@ copy_user_generic: decl %ecx jnz .Lloop_1 + CFI_REMEMBER_STATE .Lende: + popq %rcx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rcx popq %rbx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rbx ret + CFI_RESTORE_STATE #ifdef FIX_ALIGNMENT /* align destination */ @@ -252,6 +273,8 @@ copy_user_generic: addl %ecx,%edx /* edx: bytes to zero, rdi: dest, eax:zero */ .Lzero_rest: + cmpl $0,(%rsp) + jz .Le_zero movq %rdx,%rcx .Le_byte: xorl %eax,%eax @@ -261,6 +284,9 @@ copy_user_generic: .Le_zero: movq %rdx,%rax jmp .Lende + CFI_ENDPROC +ENDPROC(copy_user_generic) + /* Some CPUs run faster using the string copy instructions. This is also a lot simpler. Use them when possible. @@ -270,6 +296,7 @@ copy_user_generic: /* rdi destination * rsi source * rdx count + * ecx zero flag * * Output: * eax uncopied bytes or 0 if successfull. @@ -280,22 +307,48 @@ copy_user_generic: * And more would be dangerous because both Intel and AMD have * errata with rep movsq > 4GB. If someone feels the need to fix * this please consider this. - */ -copy_user_generic_c: + */ +ENTRY(copy_user_generic_string) + CFI_STARTPROC + movl %ecx,%r8d /* save zero flag */ movl %edx,%ecx shrl $3,%ecx andl $7,%edx + jz 10f 1: rep movsq movl %edx,%ecx 2: rep movsb -4: movl %ecx,%eax +9: movl %ecx,%eax ret -3: lea (%rdx,%rcx,8),%rax + + /* multiple of 8 byte */ +10: rep + movsq + xor %eax,%eax ret + /* exception handling */ +3: lea (%rdx,%rcx,8),%rax /* exception on quad loop */ + jmp 6f +5: movl %ecx,%eax /* exception on byte loop */ + /* eax: left over bytes */ +6: testl %r8d,%r8d /* zero flag set? */ + jz 7f + movl %eax,%ecx /* initialize x86 loop counter */ + push %rax + xorl %eax,%eax +8: rep + stosb /* zero the rest */ +11: pop %rax +7: ret + CFI_ENDPROC +END(copy_user_generic_c) + .section __ex_table,"a" .quad 1b,3b - .quad 2b,4b + .quad 2b,5b + .quad 8b,11b + .quad 10b,3b .previous diff --git a/arch/x86_64/lib/csum-copy.S b/arch/x86_64/lib/csum-copy.S index 72fd55ee896e..f0dba36578ea 100644 --- a/arch/x86_64/lib/csum-copy.S +++ b/arch/x86_64/lib/csum-copy.S @@ -5,8 +5,9 @@ * License. See the file COPYING in the main directory of this archive * for more details. No warranty for anything given at all. */ - #include <linux/linkage.h> - #include <asm/errno.h> +#include <linux/linkage.h> +#include <asm/dwarf2.h> +#include <asm/errno.h> /* * Checksum copy with exception handling. @@ -53,19 +54,24 @@ .endm - .globl csum_partial_copy_generic - .p2align 4 -csum_partial_copy_generic: +ENTRY(csum_partial_copy_generic) + CFI_STARTPROC cmpl $3*64,%edx jle .Lignore .Lignore: subq $7*8,%rsp + CFI_ADJUST_CFA_OFFSET 7*8 movq %rbx,2*8(%rsp) + CFI_REL_OFFSET rbx, 2*8 movq %r12,3*8(%rsp) + CFI_REL_OFFSET r12, 3*8 movq %r14,4*8(%rsp) + CFI_REL_OFFSET r14, 4*8 movq %r13,5*8(%rsp) + CFI_REL_OFFSET r13, 5*8 movq %rbp,6*8(%rsp) + CFI_REL_OFFSET rbp, 6*8 movq %r8,(%rsp) movq %r9,1*8(%rsp) @@ -208,14 +214,22 @@ csum_partial_copy_generic: addl %ebx,%eax adcl %r9d,%eax /* carry */ + CFI_REMEMBER_STATE .Lende: movq 2*8(%rsp),%rbx + CFI_RESTORE rbx movq 3*8(%rsp),%r12 + CFI_RESTORE r12 movq 4*8(%rsp),%r14 + CFI_RESTORE r14 movq 5*8(%rsp),%r13 + CFI_RESTORE r13 movq 6*8(%rsp),%rbp + CFI_RESTORE rbp addq $7*8,%rsp + CFI_ADJUST_CFA_OFFSET -7*8 ret + CFI_RESTORE_STATE /* Exception handlers. Very simple, zeroing is done in the wrappers */ .Lbad_source: @@ -231,3 +245,5 @@ csum_partial_copy_generic: jz .Lende movl $-EFAULT,(%rax) jmp .Lende + CFI_ENDPROC +ENDPROC(csum_partial_copy_generic) diff --git a/arch/x86_64/lib/getuser.S b/arch/x86_64/lib/getuser.S index 3844d5e885a4..5448876261f8 100644 --- a/arch/x86_64/lib/getuser.S +++ b/arch/x86_64/lib/getuser.S @@ -27,25 +27,26 @@ */ #include <linux/linkage.h> +#include <asm/dwarf2.h> #include <asm/page.h> #include <asm/errno.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> .text - .p2align 4 -.globl __get_user_1 -__get_user_1: +ENTRY(__get_user_1) + CFI_STARTPROC GET_THREAD_INFO(%r8) cmpq threadinfo_addr_limit(%r8),%rcx jae bad_get_user 1: movzb (%rcx),%edx xorl %eax,%eax ret + CFI_ENDPROC +ENDPROC(__get_user_1) - .p2align 4 -.globl __get_user_2 -__get_user_2: +ENTRY(__get_user_2) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $1,%rcx jc 20f @@ -57,10 +58,11 @@ __get_user_2: ret 20: decq %rcx jmp bad_get_user + CFI_ENDPROC +ENDPROC(__get_user_2) - .p2align 4 -.globl __get_user_4 -__get_user_4: +ENTRY(__get_user_4) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $3,%rcx jc 30f @@ -72,10 +74,11 @@ __get_user_4: ret 30: subq $3,%rcx jmp bad_get_user + CFI_ENDPROC +ENDPROC(__get_user_4) - .p2align 4 -.globl __get_user_8 -__get_user_8: +ENTRY(__get_user_8) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $7,%rcx jc 40f @@ -87,11 +90,16 @@ __get_user_8: ret 40: subq $7,%rcx jmp bad_get_user + CFI_ENDPROC +ENDPROC(__get_user_8) bad_get_user: + CFI_STARTPROC xorl %edx,%edx movq $(-EFAULT),%rax ret + CFI_ENDPROC +END(bad_get_user) .section __ex_table,"a" .quad 1b,bad_get_user diff --git a/arch/x86_64/lib/iomap_copy.S b/arch/x86_64/lib/iomap_copy.S index 8bbade5fea05..05a95e713da8 100644 --- a/arch/x86_64/lib/iomap_copy.S +++ b/arch/x86_64/lib/iomap_copy.S @@ -15,12 +15,16 @@ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. */ +#include <linux/linkage.h> +#include <asm/dwarf2.h> + /* * override generic version in lib/iomap_copy.c */ - .globl __iowrite32_copy - .p2align 4 -__iowrite32_copy: +ENTRY(__iowrite32_copy) + CFI_STARTPROC movl %edx,%ecx rep movsd ret + CFI_ENDPROC +ENDPROC(__iowrite32_copy) diff --git a/arch/x86_64/lib/memcpy.S b/arch/x86_64/lib/memcpy.S index 5554948b5554..967b22fa7d07 100644 --- a/arch/x86_64/lib/memcpy.S +++ b/arch/x86_64/lib/memcpy.S @@ -1,6 +1,10 @@ /* Copyright 2002 Andi Kleen */ - #include <asm/cpufeature.h> +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/dwarf2.h> +#include <asm/cpufeature.h> + /* * memcpy - Copy a memory block. * @@ -13,12 +17,26 @@ * rax original destination */ - .globl __memcpy - .globl memcpy - .p2align 4 -__memcpy: -memcpy: + ALIGN +memcpy_c: + CFI_STARTPROC + movq %rdi,%rax + movl %edx,%ecx + shrl $3,%ecx + andl $7,%edx + rep movsq + movl %edx,%ecx + rep movsb + ret + CFI_ENDPROC +ENDPROC(memcpy_c) + +ENTRY(__memcpy) +ENTRY(memcpy) + CFI_STARTPROC pushq %rbx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbx, 0 movq %rdi,%rax movl %edx,%ecx @@ -86,36 +104,27 @@ memcpy: .Lende: popq %rbx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rbx ret .Lfinal: + CFI_ENDPROC +ENDPROC(memcpy) +ENDPROC(__memcpy) /* Some CPUs run faster using the string copy instructions. It is also a lot simpler. Use this when possible */ + .section .altinstr_replacement,"ax" +1: .byte 0xeb /* jmp <disp8> */ + .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */ +2: + .previous .section .altinstructions,"a" .align 8 - .quad memcpy - .quad memcpy_c - .byte X86_FEATURE_REP_GOOD - .byte .Lfinal-memcpy - .byte memcpy_c_end-memcpy_c - .previous - - .section .altinstr_replacement,"ax" - /* rdi destination - * rsi source - * rdx count - */ -memcpy_c: - movq %rdi,%rax - movl %edx,%ecx - shrl $3,%ecx - andl $7,%edx - rep - movsq - movl %edx,%ecx - rep - movsb - ret -memcpy_c_end: + .quad memcpy + .quad 1b + .byte X86_FEATURE_REP_GOOD + .byte .Lfinal - memcpy + .byte 2b - 1b .previous diff --git a/arch/x86_64/lib/memset.S b/arch/x86_64/lib/memset.S index ad397f2c7de8..09ed1f6b0eaa 100644 --- a/arch/x86_64/lib/memset.S +++ b/arch/x86_64/lib/memset.S @@ -1,4 +1,9 @@ /* Copyright 2002 Andi Kleen, SuSE Labs */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/dwarf2.h> + /* * ISO C memset - set a memory block to a byte value. * @@ -8,11 +13,29 @@ * * rax original destination */ - .globl __memset - .globl memset - .p2align 4 -memset: -__memset: + ALIGN +memset_c: + CFI_STARTPROC + movq %rdi,%r9 + movl %edx,%r8d + andl $7,%r8d + movl %edx,%ecx + shrl $3,%ecx + /* expand byte value */ + movzbl %sil,%esi + movabs $0x0101010101010101,%rax + mulq %rsi /* with rax, clobbers rdx */ + rep stosq + movl %r8d,%ecx + rep stosb + movq %r9,%rax + ret + CFI_ENDPROC +ENDPROC(memset_c) + +ENTRY(memset) +ENTRY(__memset) + CFI_STARTPROC movq %rdi,%r10 movq %rdx,%r11 @@ -25,6 +48,7 @@ __memset: movl %edi,%r9d andl $7,%r9d jnz .Lbad_alignment + CFI_REMEMBER_STATE .Lafter_bad_alignment: movl %r11d,%ecx @@ -75,6 +99,7 @@ __memset: movq %r10,%rax ret + CFI_RESTORE_STATE .Lbad_alignment: cmpq $7,%r11 jbe .Lhandle_7 @@ -84,42 +109,26 @@ __memset: addq %r8,%rdi subq %r8,%r11 jmp .Lafter_bad_alignment +.Lfinal: + CFI_ENDPROC +ENDPROC(memset) +ENDPROC(__memset) /* Some CPUs run faster using the string instructions. It is also a lot simpler. Use this when possible */ #include <asm/cpufeature.h> + .section .altinstr_replacement,"ax" +1: .byte 0xeb /* jmp <disp8> */ + .byte (memset_c - memset) - (2f - 1b) /* offset */ +2: + .previous .section .altinstructions,"a" .align 8 - .quad memset - .quad memset_c - .byte X86_FEATURE_REP_GOOD - .byte memset_c_end-memset_c - .byte memset_c_end-memset_c - .previous - - .section .altinstr_replacement,"ax" - /* rdi destination - * rsi value - * rdx count - */ -memset_c: - movq %rdi,%r9 - movl %edx,%r8d - andl $7,%r8d - movl %edx,%ecx - shrl $3,%ecx - /* expand byte value */ - movzbl %sil,%esi - movabs $0x0101010101010101,%rax - mulq %rsi /* with rax, clobbers rdx */ - rep - stosq - movl %r8d,%ecx - rep - stosb - movq %r9,%rax - ret -memset_c_end: + .quad memset + .quad 1b + .byte X86_FEATURE_REP_GOOD + .byte .Lfinal - memset + .byte 2b - 1b .previous diff --git a/arch/x86_64/lib/putuser.S b/arch/x86_64/lib/putuser.S index 7f5593974e2d..4989f5a8fa9b 100644 --- a/arch/x86_64/lib/putuser.S +++ b/arch/x86_64/lib/putuser.S @@ -25,25 +25,26 @@ */ #include <linux/linkage.h> +#include <asm/dwarf2.h> #include <asm/page.h> #include <asm/errno.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> .text - .p2align 4 -.globl __put_user_1 -__put_user_1: +ENTRY(__put_user_1) + CFI_STARTPROC GET_THREAD_INFO(%r8) cmpq threadinfo_addr_limit(%r8),%rcx jae bad_put_user 1: movb %dl,(%rcx) xorl %eax,%eax ret + CFI_ENDPROC +ENDPROC(__put_user_1) - .p2align 4 -.globl __put_user_2 -__put_user_2: +ENTRY(__put_user_2) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $1,%rcx jc 20f @@ -55,10 +56,11 @@ __put_user_2: ret 20: decq %rcx jmp bad_put_user + CFI_ENDPROC +ENDPROC(__put_user_2) - .p2align 4 -.globl __put_user_4 -__put_user_4: +ENTRY(__put_user_4) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $3,%rcx jc 30f @@ -70,10 +72,11 @@ __put_user_4: ret 30: subq $3,%rcx jmp bad_put_user + CFI_ENDPROC +ENDPROC(__put_user_4) - .p2align 4 -.globl __put_user_8 -__put_user_8: +ENTRY(__put_user_8) + CFI_STARTPROC GET_THREAD_INFO(%r8) addq $7,%rcx jc 40f @@ -85,10 +88,15 @@ __put_user_8: ret 40: subq $7,%rcx jmp bad_put_user + CFI_ENDPROC +ENDPROC(__put_user_8) bad_put_user: + CFI_STARTPROC movq $(-EFAULT),%rax ret + CFI_ENDPROC +END(bad_put_user) .section __ex_table,"a" .quad 1b,bad_put_user diff --git a/arch/x86_64/lib/rwlock.S b/arch/x86_64/lib/rwlock.S new file mode 100644 index 000000000000..0cde1f807314 --- /dev/null +++ b/arch/x86_64/lib/rwlock.S @@ -0,0 +1,38 @@ +/* Slow paths of read/write spinlocks. */ + +#include <linux/linkage.h> +#include <asm/rwlock.h> +#include <asm/alternative-asm.i> +#include <asm/dwarf2.h> + +/* rdi: pointer to rwlock_t */ +ENTRY(__write_lock_failed) + CFI_STARTPROC + LOCK_PREFIX + addl $RW_LOCK_BIAS,(%rdi) +1: rep + nop + cmpl $RW_LOCK_BIAS,(%rdi) + jne 1b + LOCK_PREFIX + subl $RW_LOCK_BIAS,(%rdi) + jnz __write_lock_failed + ret + CFI_ENDPROC +END(__write_lock_failed) + +/* rdi: pointer to rwlock_t */ +ENTRY(__read_lock_failed) + CFI_STARTPROC + LOCK_PREFIX + incl (%rdi) +1: rep + nop + cmpl $1,(%rdi) + js 1b + LOCK_PREFIX + decl (%rdi) + js __read_lock_failed + ret + CFI_ENDPROC +END(__read_lock_failed) diff --git a/arch/x86_64/lib/thunk.S b/arch/x86_64/lib/thunk.S index 332ea5dff916..0025535cac8d 100644 --- a/arch/x86_64/lib/thunk.S +++ b/arch/x86_64/lib/thunk.S @@ -1,10 +1,9 @@ - /* - * Save registers before calling assembly functions. This avoids - * disturbance of register allocation in some inline assembly constructs. - * Copyright 2001,2002 by Andi Kleen, SuSE Labs. - * Subject to the GNU public license, v.2. No warranty of any kind. - * $Id: thunk.S,v 1.2 2002/03/13 20:06:58 ak Exp $ - */ +/* + * Save registers before calling assembly functions. This avoids + * disturbance of register allocation in some inline assembly constructs. + * Copyright 2001,2002 by Andi Kleen, SuSE Labs. + * Subject to the GNU public license, v.2. No warranty of any kind. + */ #include <linux/config.h> #include <linux/linkage.h> @@ -67,33 +66,3 @@ restore_norax: RESTORE_ARGS 1 ret CFI_ENDPROC - -#ifdef CONFIG_SMP -/* Support for read/write spinlocks. */ - .text -/* rax: pointer to rwlock_t */ -ENTRY(__write_lock_failed) - lock - addl $RW_LOCK_BIAS,(%rax) -1: rep - nop - cmpl $RW_LOCK_BIAS,(%rax) - jne 1b - lock - subl $RW_LOCK_BIAS,(%rax) - jnz __write_lock_failed - ret - -/* rax: pointer to rwlock_t */ -ENTRY(__read_lock_failed) - lock - incl (%rax) -1: rep - nop - cmpl $1,(%rax) - js 1b - lock - decl (%rax) - js __read_lock_failed - ret -#endif diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 4198798e1469..1a17b0733ab5 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -40,8 +40,7 @@ #define PF_RSVD (1<<3) #define PF_INSTR (1<<4) -#ifdef CONFIG_KPROBES -ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); +static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); /* Hook to register for page fault notifications */ int register_page_fault_notifier(struct notifier_block *nb) @@ -49,11 +48,13 @@ int register_page_fault_notifier(struct notifier_block *nb) vmalloc_sync_all(); return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); } +EXPORT_SYMBOL_GPL(register_page_fault_notifier); int unregister_page_fault_notifier(struct notifier_block *nb) { return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); } +EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); static inline int notify_page_fault(enum die_val val, const char *str, struct pt_regs *regs, long err, int trap, int sig) @@ -67,13 +68,6 @@ static inline int notify_page_fault(enum die_val val, const char *str, }; return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); } -#else -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) -{ - return NOTIFY_DONE; -} -#endif void bust_spinlocks(int yes) { @@ -102,7 +96,7 @@ void bust_spinlocks(int yes) static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, unsigned long error_code) { - unsigned char *instr; + unsigned char __user *instr; int scan_more = 1; int prefetch = 0; unsigned char *max_instr; @@ -111,7 +105,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, if (error_code & PF_INSTR) return 0; - instr = (unsigned char *)convert_rip_to_linear(current, regs); + instr = (unsigned char __user *)convert_rip_to_linear(current, regs); max_instr = instr + 15; if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE) @@ -122,7 +116,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, unsigned char instr_hi; unsigned char instr_lo; - if (__get_user(opcode, instr)) + if (__get_user(opcode, (char __user *)instr)) break; instr_hi = opcode & 0xf0; @@ -160,7 +154,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, case 0x00: /* Prefetch instruction is 0x0F0D or 0x0F18 */ scan_more = 0; - if (__get_user(opcode, instr)) + if (__get_user(opcode, (char __user *)instr)) break; prefetch = (instr_lo == 0xF) && (opcode == 0x0D || opcode == 0x18); @@ -176,7 +170,7 @@ static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, static int bad_address(void *p) { unsigned long dummy; - return __get_user(dummy, (unsigned long *)p); + return __get_user(dummy, (unsigned long __user *)p); } void dump_pagetable(unsigned long address) diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 52fd42c40c86..1e4669fa5734 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -229,7 +229,6 @@ __init void *early_ioremap(unsigned long addr, unsigned long size) /* actually usually some more */ if (size >= LARGE_PAGE_SIZE) { - printk("SMBIOS area too long %lu\n", size); return NULL; } set_pmd(temp_mappings[0].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE)); @@ -250,12 +249,13 @@ __init void early_iounmap(void *addr, unsigned long size) } static void __meminit -phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end) +phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end) { - int i; + int i = pmd_index(address); - for (i = 0; i < PTRS_PER_PMD; pmd++, i++, address += PMD_SIZE) { + for (; i < PTRS_PER_PMD; i++, address += PMD_SIZE) { unsigned long entry; + pmd_t *pmd = pmd_page + pmd_index(address); if (address >= end) { if (!after_bootmem) @@ -263,6 +263,10 @@ phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end) set_pmd(pmd, __pmd(0)); break; } + + if (pmd_val(*pmd)) + continue; + entry = _PAGE_NX|_PAGE_PSE|_KERNPG_TABLE|_PAGE_GLOBAL|address; entry &= __supported_pte_mask; set_pmd(pmd, __pmd(entry)); @@ -272,45 +276,41 @@ phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end) static void __meminit phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end) { - pmd_t *pmd = pmd_offset(pud, (unsigned long)__va(address)); - - if (pmd_none(*pmd)) { - spin_lock(&init_mm.page_table_lock); - phys_pmd_init(pmd, address, end); - spin_unlock(&init_mm.page_table_lock); - __flush_tlb_all(); - } + pmd_t *pmd = pmd_offset(pud,0); + spin_lock(&init_mm.page_table_lock); + phys_pmd_init(pmd, address, end); + spin_unlock(&init_mm.page_table_lock); + __flush_tlb_all(); } -static void __meminit phys_pud_init(pud_t *pud, unsigned long address, unsigned long end) +static void __meminit phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end) { - long i = pud_index(address); - - pud = pud + i; + int i = pud_index(addr); - if (after_bootmem && pud_val(*pud)) { - phys_pmd_update(pud, address, end); - return; - } - for (; i < PTRS_PER_PUD; pud++, i++) { + for (; i < PTRS_PER_PUD; i++, addr = (addr & PUD_MASK) + PUD_SIZE ) { int map; - unsigned long paddr, pmd_phys; + unsigned long pmd_phys; + pud_t *pud = pud_page + pud_index(addr); pmd_t *pmd; - paddr = (address & PGDIR_MASK) + i*PUD_SIZE; - if (paddr >= end) + if (addr >= end) break; - if (!after_bootmem && !e820_any_mapped(paddr, paddr+PUD_SIZE, 0)) { + if (!after_bootmem && !e820_any_mapped(addr,addr+PUD_SIZE,0)) { set_pud(pud, __pud(0)); continue; } + if (pud_val(*pud)) { + phys_pmd_update(pud, addr, end); + continue; + } + pmd = alloc_low_page(&map, &pmd_phys); spin_lock(&init_mm.page_table_lock); set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE)); - phys_pmd_init(pmd, paddr, end); + phys_pmd_init(pmd, addr, end); spin_unlock(&init_mm.page_table_lock); unmap_low_page(map); } @@ -597,12 +597,6 @@ void __init mem_init(void) pci_iommu_alloc(); - /* How many end-of-memory variables you have, grandma! */ - max_low_pfn = end_pfn; - max_pfn = end_pfn; - num_physpages = end_pfn; - high_memory = (void *) __va(end_pfn * PAGE_SIZE); - /* clear the zero-page */ memset(empty_zero_page, 0, PAGE_SIZE); diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c index 7c45c2d2b8b2..5cf594f9230d 100644 --- a/arch/x86_64/mm/k8topology.c +++ b/arch/x86_64/mm/k8topology.c @@ -54,6 +54,9 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) nodes_clear(nodes_parsed); + if (!early_pci_allowed()) + return -1; + nb = find_northbridge(); if (nb < 0) return nb; diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index b2fac14baac0..322bf45fc36a 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -225,7 +225,7 @@ void __init numa_init_array(void) int numa_fake __initdata = 0; /* Numa emulation */ -static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn) +static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn) { int i; struct bootnode nodes[MAX_NUMNODES]; @@ -348,9 +348,10 @@ void __init paging_init(void) } } -/* [numa=off] */ -__init int numa_setup(char *opt) +static __init int numa_setup(char *opt) { + if (!opt) + return -EINVAL; if (!strncmp(opt,"off",3)) numa_off = 1; #ifdef CONFIG_NUMA_EMU @@ -366,9 +367,11 @@ __init int numa_setup(char *opt) if (!strncmp(opt,"hotadd=", 7)) hotadd_percent = simple_strtoul(opt+7, NULL, 10); #endif - return 1; + return 0; } +early_param("numa", numa_setup); + /* * Setup early cpu_to_node. * diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index 2685b1f3671c..3e231d762aaa 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -108,8 +108,8 @@ static void revert_page(unsigned long address, pgprot_t ref_prot) BUG_ON(pud_none(*pud)); pmd = pmd_offset(pud, address); BUG_ON(pmd_val(*pmd) & _PAGE_PSE); - pgprot_val(ref_prot) |= _PAGE_PSE; large_pte = mk_pte_phys(__pa(address) & LARGE_PAGE_MASK, ref_prot); + large_pte = pte_mkhuge(large_pte); set_pte((pte_t *)pmd, large_pte); } @@ -119,32 +119,28 @@ __change_page_attr(unsigned long address, unsigned long pfn, pgprot_t prot, { pte_t *kpte; struct page *kpte_page; - unsigned kpte_flags; pgprot_t ref_prot2; kpte = lookup_address(address); if (!kpte) return 0; kpte_page = virt_to_page(((unsigned long)kpte) & PAGE_MASK); - kpte_flags = pte_val(*kpte); if (pgprot_val(prot) != pgprot_val(ref_prot)) { - if ((kpte_flags & _PAGE_PSE) == 0) { + if (!pte_huge(*kpte)) { set_pte(kpte, pfn_pte(pfn, prot)); } else { /* * split_large_page will take the reference for this * change_page_attr on the split page. */ - struct page *split; - ref_prot2 = __pgprot(pgprot_val(pte_pgprot(*lookup_address(address))) & ~(1<<_PAGE_BIT_PSE)); - + ref_prot2 = pte_pgprot(pte_clrhuge(*kpte)); split = split_large_page(address, prot, ref_prot2); if (!split) return -ENOMEM; - set_pte(kpte,mk_pte(split, ref_prot2)); + set_pte(kpte, mk_pte(split, ref_prot2)); kpte_page = split; - } + } page_private(kpte_page)++; - } else if ((kpte_flags & _PAGE_PSE) == 0) { + } else if (!pte_huge(*kpte)) { set_pte(kpte, pfn_pte(pfn, ref_prot)); BUG_ON(page_private(kpte_page) == 0); page_private(kpte_page)--; @@ -190,10 +186,12 @@ int change_page_attr_addr(unsigned long address, int numpages, pgprot_t prot) * lowmem */ if (__pa(address) < KERNEL_TEXT_SIZE) { unsigned long addr2; - pgprot_t prot2 = prot; + pgprot_t prot2; addr2 = __START_KERNEL_map + __pa(address); - pgprot_val(prot2) &= ~_PAGE_NX; - err = __change_page_attr(addr2, pfn, prot2, PAGE_KERNEL_EXEC); + /* Make sure the kernel mappings stay executable */ + prot2 = pte_pgprot(pte_mkexec(pfn_pte(0, prot))); + err = __change_page_attr(addr2, pfn, prot2, + PAGE_KERNEL_EXEC); } } up_write(&init_mm.mmap_sem); diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 502fce65e96a..ca10701e7a90 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -21,6 +21,8 @@ #include <asm/numa.h> #include <asm/e820.h> +int acpi_numa __initdata; + #if (defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \ defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) \ && !defined(CONFIG_MEMORY_HOTPLUG) diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index a3f6ad570179..1eb18f421edf 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -9,7 +9,7 @@ obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o obj-y += fixup.o init.o obj-$(CONFIG_ACPI) += acpi.o -obj-y += legacy.o irq.o common.o +obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o @@ -23,3 +23,4 @@ common-y += ../../i386/pci/common.o fixup-y += ../../i386/pci/fixup.o i386-y += ../../i386/pci/i386.o init-y += ../../i386/pci/init.o +early-y += ../../i386/pci/early.o diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 3c55c76c6fd5..7732f4254d21 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -156,15 +156,45 @@ static __init void unreachable_devices(void) addr = pci_dev_base(0, k, PCI_DEVFN(i, 0)); if (addr == NULL|| readl(addr) != val1) { set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE - "PCI: No mmconfig possible on device %x:%x\n", - k, i); + printk(KERN_NOTICE "PCI: No mmconfig possible" + " on device %02x:%02x\n", k, i); } } } } -void __init pci_mmcfg_init(void) +static __init void pci_mmcfg_insert_resources(void) +{ +#define PCI_MMCFG_RESOURCE_NAME_LEN 19 + int i; + struct resource *res; + char *names; + unsigned num_buses; + + res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), + pci_mmcfg_config_num, GFP_KERNEL); + + if (!res) { + printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); + return; + } + + names = (void *)&res[pci_mmcfg_config_num]; + for (i = 0; i < pci_mmcfg_config_num; i++, res++) { + num_buses = pci_mmcfg_config[i].end_bus_number - + pci_mmcfg_config[i].start_bus_number + 1; + res->name = names; + snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", + pci_mmcfg_config[i].pci_segment_group_number); + res->start = pci_mmcfg_config[i].base_address; + res->end = res->start + (num_buses << 20) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + insert_resource(&iomem_resource, res); + names += PCI_MMCFG_RESOURCE_NAME_LEN; + } +} + +void __init pci_mmcfg_init(int type) { int i; @@ -177,7 +207,9 @@ void __init pci_mmcfg_init(void) (pci_mmcfg_config[0].base_address == 0)) return; - if (!e820_all_mapped(pci_mmcfg_config[0].base_address, + /* Only do this check when type 1 works. If it doesn't work + assume we run on a Mac and always use MCFG */ + if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address, pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN, E820_RESERVED)) { printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n", @@ -186,7 +218,6 @@ void __init pci_mmcfg_init(void) return; } - /* RED-PEN i386 doesn't do _nocache right now */ pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { printk("PCI: Can not allocate memory for mmconfig structures\n"); @@ -205,6 +236,7 @@ void __init pci_mmcfg_init(void) } unreachable_devices(); + pci_mmcfg_insert_resources(); raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; |
