summaryrefslogtreecommitdiffstats
path: root/arch/x86_64/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86_64/kernel')
-rw-r--r--arch/x86_64/kernel/Makefile2
-rw-r--r--arch/x86_64/kernel/acpi/Makefile4
-rw-r--r--arch/x86_64/kernel/acpi/sleep.c17
-rw-r--r--arch/x86_64/kernel/genapic.c4
-rw-r--r--arch/x86_64/kernel/io_apic.c4
-rw-r--r--arch/x86_64/kernel/mpparse.c14
-rw-r--r--arch/x86_64/kernel/setup.c8
7 files changed, 25 insertions, 28 deletions
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index c32e198d7b2b..1579bdd0adcd 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -12,7 +12,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \
obj-$(CONFIG_X86_MCE) += mce.o
obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o
obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/
-obj-$(CONFIG_ACPI_BOOT) += acpi/
+obj-$(CONFIG_ACPI) += acpi/
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
diff --git a/arch/x86_64/kernel/acpi/Makefile b/arch/x86_64/kernel/acpi/Makefile
index d2c2ee5f9a88..7da9ace890bd 100644
--- a/arch/x86_64/kernel/acpi/Makefile
+++ b/arch/x86_64/kernel/acpi/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_ACPI_BOOT) := boot.o
-boot-$(CONFIG_ACPI_BOOT) := ../../../i386/kernel/acpi/boot.o
+obj-y := boot.o
+boot-y := ../../../i386/kernel/acpi/boot.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86_64/kernel/acpi/sleep.c
index 7a275de6df22..148f6f7ea315 100644
--- a/arch/x86_64/kernel/acpi/sleep.c
+++ b/arch/x86_64/kernel/acpi/sleep.c
@@ -47,7 +47,6 @@
#include <asm/proto.h>
#include <asm/tlbflush.h>
-
/* --------------------------------------------------------------------------
Low-Level Sleep Support
-------------------------------------------------------------------------- */
@@ -77,11 +76,12 @@ static void init_low_mapping(void)
* Create an identity mapped page table and copy the wakeup routine to
* low memory.
*/
-int acpi_save_state_mem (void)
+int acpi_save_state_mem(void)
{
init_low_mapping();
- memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start);
+ memcpy((void *)acpi_wakeup_address, &wakeup_start,
+ &wakeup_end - &wakeup_start);
acpi_copy_wakeup_routine(acpi_wakeup_address);
return 0;
@@ -90,7 +90,7 @@ int acpi_save_state_mem (void)
/*
* acpi_restore_state
*/
-void acpi_restore_state_mem (void)
+void acpi_restore_state_mem(void)
{
set_pgd(pgd_offset(current->mm, 0UL), low_ptr);
flush_tlb_all();
@@ -108,7 +108,8 @@ void __init acpi_reserve_bootmem(void)
{
acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE);
if ((&wakeup_end - &wakeup_start) > PAGE_SIZE)
- printk(KERN_CRIT "ACPI: Wakeup code way too big, will crash on attempt to suspend\n");
+ printk(KERN_CRIT
+ "ACPI: Wakeup code way too big, will crash on attempt to suspend\n");
}
static int __init acpi_sleep_setup(char *str)
@@ -127,6 +128,8 @@ static int __init acpi_sleep_setup(char *str)
__setup("acpi_sleep=", acpi_sleep_setup);
-#endif /*CONFIG_ACPI_SLEEP*/
+#endif /*CONFIG_ACPI_SLEEP */
-void acpi_pci_link_exit(void) {}
+void acpi_pci_link_exit(void)
+{
+}
diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c
index f062aa03bab7..b1c144f73149 100644
--- a/arch/x86_64/kernel/genapic.c
+++ b/arch/x86_64/kernel/genapic.c
@@ -20,7 +20,7 @@
#include <asm/smp.h>
#include <asm/ipi.h>
-#if defined(CONFIG_ACPI_BUS)
+#if defined(CONFIG_ACPI)
#include <acpi/acpi_bus.h>
#endif
@@ -47,7 +47,7 @@ void __init clustered_apic_check(void)
u8 cluster_cnt[NUM_APIC_CLUSTERS];
int num_cpus = 0;
-#if defined(CONFIG_ACPI_BUS)
+#if defined(CONFIG_ACPI)
/*
* Some x86_64 machines use physical APIC mode regardless of how many
* procs/clusters are present (x86_64 ES7000 is an example).
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index ba1a744e9bf0..40e0aca088fb 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -1864,7 +1864,7 @@ device_initcall(ioapic_init_sysfs);
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
#define IO_APIC_MAX_ID 0xFE
@@ -1947,7 +1947,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
return 0;
}
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_ACPI */
/*
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 79c362d03e2e..8d8ed6ae1d0c 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -74,7 +74,7 @@ static unsigned int num_processors = 0;
physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
/* ACPI MADT entry parsing functions */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
extern struct acpi_boot_flags acpi_boot;
#ifdef CONFIG_X86_LOCAL_APIC
extern int acpi_parse_lapic (acpi_table_entry_header *header);
@@ -84,7 +84,7 @@ extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header);
#ifdef CONFIG_X86_IO_APIC
extern int acpi_parse_ioapic (acpi_table_entry_header *header);
#endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /*CONFIG_ACPI*/
u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
@@ -519,8 +519,6 @@ void __init get_smp_config (void)
struct intel_mp_floating *mpf = mpf_found;
/*
- * ACPI may be used to obtain the entire SMP configuration or just to
- * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that
* ACPI supports both logical (e.g. Hyper-Threading) and physical
* processors, where MPS only supports physical.
*/
@@ -673,7 +671,7 @@ void __init find_smp_config (void)
ACPI-based MP Configuration
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
void __init mp_register_lapic_address (
u64 address)
@@ -929,11 +927,9 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#ifdef CONFIG_ACPI_BUS
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_fadt.sci_int == gsi)
return gsi;
-#endif
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0) {
@@ -973,13 +969,11 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
if (gsi < MAX_GSI_NUM) {
if (gsi > 15)
gsi = pci_irq++;
-#ifdef CONFIG_ACPI_BUS
/*
* Don't assign IRQ used by ACPI SCI
*/
if (gsi == acpi_fadt.sci_int)
gsi = pci_irq++;
-#endif
gsi_to_irq[irq] = gsi;
} else {
printk(KERN_ERR "GSI %u is too high\n", gsi);
@@ -994,4 +988,4 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
}
#endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /*CONFIG_ACPI*/
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index b356f8e6adfe..0511d8087910 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -71,7 +71,7 @@ unsigned long mmu_cr4_features;
int acpi_disabled;
EXPORT_SYMBOL(acpi_disabled);
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
extern int __initdata acpi_ht;
extern acpi_interrupt_flags acpi_sci_flags;
int __initdata acpi_force = 0;
@@ -294,7 +294,7 @@ static __init void parse_cmdline_early (char ** cmdline_p)
maxcpus = simple_strtoul(from + 8, NULL, 0);
}
#endif
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
/* "acpi=off" disables both ACPI table parsing and interpreter init */
if (!memcmp(from, "acpi=off", 8))
disable_acpi();
@@ -566,7 +566,7 @@ void __init setup_arch(char **cmdline_p)
init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
/*
* Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
* Call this early for SRAT node setup.
@@ -658,7 +658,7 @@ void __init setup_arch(char **cmdline_p)
check_ioapic();
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
/*
* Read APIC and some other early information from ACPI tables.
*/
OpenPOWER on IntegriCloud