diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/Kconfig | 23 | ||||
| -rw-r--r-- | arch/x86/boot/edd.c | 10 | ||||
| -rw-r--r-- | arch/x86/kernel/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/asm-offsets_32.c | 9 | ||||
| -rw-r--r-- | arch/x86/kernel/asm-offsets_64.c | 9 | ||||
| -rw-r--r-- | arch/x86/kernel/cpu/mtrr/if.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/irq_32.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/olpc.c | 260 | ||||
| -rw-r--r-- | arch/x86/kernel/time_32.c | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/vmlinux_64.lds.S | 6 | ||||
| -rw-r--r-- | arch/x86/pci/Makefile_32 | 1 | ||||
| -rw-r--r-- | arch/x86/pci/init.c | 3 | ||||
| -rw-r--r-- | arch/x86/pci/olpc.c | 313 | ||||
| -rw-r--r-- | arch/x86/pci/pci.h | 1 | ||||
| -rw-r--r-- | arch/x86/vdso/vdso.S | 10 |
15 files changed, 620 insertions, 32 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a12dbb2b93f3..f70e3e3a9fa7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -537,9 +537,6 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT Calgary anyway, pass 'iommu=calgary' on the kernel command line. If unsure, say Y. -config IOMMU_HELPER - def_bool (CALGARY_IOMMU || GART_IOMMU) - # need this always selected by IOMMU for the VIA workaround config SWIOTLB bool @@ -550,6 +547,8 @@ config SWIOTLB access 32-bits of memory can be used on systems with more than 3 GB of memory. If unsure, say Y. +config IOMMU_HELPER + def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB) config NR_CPUS int "Maximum number of CPUs (2-255)" @@ -1505,6 +1504,10 @@ config PCI_GODIRECT config PCI_GOANY bool "Any" +config PCI_GOOLPC + bool "OLPC" + depends on OLPC + endchoice config PCI_BIOS @@ -1514,12 +1517,17 @@ config PCI_BIOS # x86-64 doesn't support PCI BIOS access from long mode so always go direct. config PCI_DIRECT def_bool y - depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS) + depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS) config PCI_MMCONFIG def_bool y depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) +config PCI_OLPC + bool + depends on PCI && PCI_GOOLPC + default y + config PCI_DOMAINS def_bool y depends on PCI @@ -1639,6 +1647,13 @@ config GEODE_MFGPT_TIMER MFGPTs have a better resolution and max interval than the generic PIT, and are suitable for use as high-res timers. +config OLPC + bool "One Laptop Per Child support" + default n + help + Add support for detecting the unique features of the OLPC + XO hardware. + endif # X86_32 config K8_NB diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c index d84a48ece785..03399d64013b 100644 --- a/arch/x86/boot/edd.c +++ b/arch/x86/boot/edd.c @@ -126,17 +126,25 @@ void query_edd(void) { char eddarg[8]; int do_mbr = 1; +#ifdef CONFIG_EDD_OFF + int do_edd = 0; +#else int do_edd = 1; +#endif int be_quiet; int devno; struct edd_info ei, *edp; u32 *mbrptr; if (cmdline_find_option("edd", eddarg, sizeof eddarg) > 0) { - if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip")) + if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip")) { + do_edd = 1; do_mbr = 0; + } else if (!strcmp(eddarg, "off")) do_edd = 0; + else if (!strcmp(eddarg, "on")) + do_edd = 1; } be_quiet = cmdline_find_option_bool("quiet"); diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index fa19c3819540..350eb1b2a208 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -91,6 +91,8 @@ endif obj-$(CONFIG_SCx200) += scx200.o scx200-y += scx200_32.o +obj-$(CONFIG_OLPC) += olpc.o + ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y) diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c index 670c3c311289..92588083950f 100644 --- a/arch/x86/kernel/asm-offsets_32.c +++ b/arch/x86/kernel/asm-offsets_32.c @@ -9,6 +9,7 @@ #include <linux/signal.h> #include <linux/personality.h> #include <linux/suspend.h> +#include <linux/kbuild.h> #include <asm/ucontext.h> #include "sigframe.h" #include <asm/pgtable.h> @@ -23,14 +24,6 @@ #include <linux/lguest.h> #include "../../../drivers/lguest/lg.h" -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -#define OFFSET(sym, str, mem) \ - DEFINE(sym, offsetof(struct str, mem)); - /* workaround for a warning with -Wmissing-prototypes */ void foo(void); diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index 494e1e096ee6..f126c05d6170 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -10,6 +10,7 @@ #include <linux/errno.h> #include <linux/hardirq.h> #include <linux/suspend.h> +#include <linux/kbuild.h> #include <asm/pda.h> #include <asm/processor.h> #include <asm/segment.h> @@ -17,14 +18,6 @@ #include <asm/ia32.h> #include <asm/bootparam.h> -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -#define OFFSET(sym, str, mem) \ - DEFINE(sym, offsetof(struct str, mem)) - #define __NO_STUBS 1 #undef __SYSCALL #undef _ASM_X86_64_UNISTD_H_ diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c index 1960f1985e5e..84c480bb3715 100644 --- a/arch/x86/kernel/cpu/mtrr/if.c +++ b/arch/x86/kernel/cpu/mtrr/if.c @@ -424,7 +424,7 @@ static int __init mtrr_if_init(void) return -ENODEV; proc_root_mtrr = - proc_create("mtrr", S_IWUSR | S_IRUGO, &proc_root, &mtrr_fops); + proc_create("mtrr", S_IWUSR | S_IRUGO, NULL, &mtrr_fops); if (proc_root_mtrr) proc_root_mtrr->owner = THIS_MODULE; diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 00bda7bcda63..147352df28b9 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -190,8 +190,6 @@ void irq_ctx_exit(int cpu) hardirq_ctx[cpu] = NULL; } -extern asmlinkage void __do_softirq(void); - asmlinkage void do_softirq(void) { unsigned long flags; diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c new file mode 100644 index 000000000000..3e6672274807 --- /dev/null +++ b/arch/x86/kernel/olpc.c @@ -0,0 +1,260 @@ +/* + * Support for the OLPC DCON and OLPC EC access + * + * Copyright © 2006 Advanced Micro Devices, Inc. + * Copyright © 2007-2008 Andres Salomon <dilinger@debian.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/string.h> +#include <asm/geode.h> +#include <asm/olpc.h> + +#ifdef CONFIG_OPEN_FIRMWARE +#include <asm/ofw.h> +#endif + +struct olpc_platform_t olpc_platform_info; +EXPORT_SYMBOL_GPL(olpc_platform_info); + +static DEFINE_SPINLOCK(ec_lock); + +/* what the timeout *should* be (in ms) */ +#define EC_BASE_TIMEOUT 20 + +/* the timeout that bugs in the EC might force us to actually use */ +static int ec_timeout = EC_BASE_TIMEOUT; + +static int __init olpc_ec_timeout_set(char *str) +{ + if (get_option(&str, &ec_timeout) != 1) { + ec_timeout = EC_BASE_TIMEOUT; + printk(KERN_ERR "olpc-ec: invalid argument to " + "'olpc_ec_timeout=', ignoring!\n"); + } + printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n", + ec_timeout); + return 1; +} +__setup("olpc_ec_timeout=", olpc_ec_timeout_set); + +/* + * These {i,o}bf_status functions return whether the buffers are full or not. + */ + +static inline unsigned int ibf_status(unsigned int port) +{ + return !!(inb(port) & 0x02); +} + +static inline unsigned int obf_status(unsigned int port) +{ + return inb(port) & 0x01; +} + +#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d)) +static int __wait_on_ibf(unsigned int line, unsigned int port, int desired) +{ + unsigned int timeo; + int state = ibf_status(port); + + for (timeo = ec_timeout; state != desired && timeo; timeo--) { + mdelay(1); + state = ibf_status(port); + } + + if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && + timeo < (ec_timeout - EC_BASE_TIMEOUT)) { + printk(KERN_WARNING "olpc-ec: %d: waited %u ms for IBF!\n", + line, ec_timeout - timeo); + } + + return !(state == desired); +} + +#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d)) +static int __wait_on_obf(unsigned int line, unsigned int port, int desired) +{ + unsigned int timeo; + int state = obf_status(port); + + for (timeo = ec_timeout; state != desired && timeo; timeo--) { + mdelay(1); + state = obf_status(port); + } + + if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && + timeo < (ec_timeout - EC_BASE_TIMEOUT)) { + printk(KERN_WARNING "olpc-ec: %d: waited %u ms for OBF!\n", + line, ec_timeout - timeo); + } + + return !(state == desired); +} + +/* + * This allows the kernel to run Embedded Controller commands. The EC is + * documented at <http://wiki.laptop.org/go/Embedded_controller>, and the + * available EC commands are here: + * <http://wiki.laptop.org/go/Ec_specification>. Unfortunately, while + * OpenFirmware's source is available, the EC's is not. + */ +int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, + unsigned char *outbuf, size_t outlen) +{ + unsigned long flags; + int ret = -EIO; + int i; + + spin_lock_irqsave(&ec_lock, flags); + + /* Clear OBF */ + for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++) + inb(0x68); + if (i == 10) { + printk(KERN_ERR "olpc-ec: timeout while attempting to " + "clear OBF flag!\n"); + goto err; + } + + if (wait_on_ibf(0x6c, 0)) { + printk(KERN_ERR "olpc-ec: timeout waiting for EC to " + "quiesce!\n"); + goto err; + } + +restart: + /* + * Note that if we time out during any IBF checks, that's a failure; + * we have to return. There's no way for the kernel to clear that. + * + * If we time out during an OBF check, we can restart the command; + * reissuing it will clear the OBF flag, and we should be alright. + * The OBF flag will sometimes misbehave due to what we believe + * is a hardware quirk.. + */ + printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd); + outb(cmd, 0x6c); + + if (wait_on_ibf(0x6c, 0)) { + printk(KERN_ERR "olpc-ec: timeout waiting for EC to read " + "command!\n"); + goto err; + } + + if (inbuf && inlen) { + /* write data to EC */ + for (i = 0; i < inlen; i++) { + if (wait_on_ibf(0x6c, 0)) { + printk(KERN_ERR "olpc-ec: timeout waiting for" + " EC accept data!\n"); + goto err; + } + printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n", + inbuf[i]); + outb(inbuf[i], 0x68); + } + } + if (outbuf && outlen) { + /* read data from EC */ + for (i = 0; i < outlen; i++) { + if (wait_on_obf(0x6c, 1)) { + printk(KERN_ERR "olpc-ec: timeout waiting for" + " EC to provide data!\n"); + goto restart; + } + outbuf[i] = inb(0x68); + printk(KERN_DEBUG "olpc-ec: received 0x%x\n", + outbuf[i]); + } + } + + ret = 0; +err: + spin_unlock_irqrestore(&ec_lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(olpc_ec_cmd); + +#ifdef CONFIG_OPEN_FIRMWARE +static void __init platform_detect(void) +{ + size_t propsize; + u32 rev; + + if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4, + &propsize) || propsize != 4) { + printk(KERN_ERR "ofw: getprop call failed!\n"); + rev = 0; + } + olpc_platform_info.boardrev = be32_to_cpu(rev); +} +#else +static void __init platform_detect(void) +{ + /* stopgap until OFW support is added to the kernel */ + olpc_platform_info.boardrev = be32_to_cpu(0xc2); +} +#endif + +static int __init olpc_init(void) +{ + unsigned char *romsig; + + /* The ioremap check is dangerous; limit what we run it on */ + if (!is_geode() || geode_has_vsa2()) + return 0; + + spin_lock_init(&ec_lock); + + romsig = ioremap(0xffffffc0, 16); + if (!romsig) + return 0; + + if (strncmp(romsig, "CL1 Q", 7)) + goto unmap; + if (strncmp(romsig+6, romsig+13, 3)) { + printk(KERN_INFO "OLPC BIOS signature looks invalid. " + "Assuming not OLPC\n"); + goto unmap; + } + + printk(KERN_INFO "OLPC board with OpenFirmware %.16s\n", romsig); + olpc_platform_info.flags |= OLPC_F_PRESENT; + + /* get the platform revision */ + platform_detect(); + + /* assume B1 and above models always have a DCON */ + if (olpc_board_at_least(olpc_board(0xb1))) + olpc_platform_info.flags |= OLPC_F_DCON; + + /* get the EC revision */ + olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, + (unsigned char *) &olpc_platform_info.ecver, 1); + + /* check to see if the VSA exists */ + if (geode_has_vsa2()) + olpc_platform_info.flags |= OLPC_F_VSA; + + printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n", + ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "", + olpc_platform_info.boardrev >> 4, + olpc_platform_info.ecver); + +unmap: + iounmap(romsig); + return 0; +} + +postcore_initcall(olpc_init); diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c index 1a89e93f3f1c..2ff21f398934 100644 --- a/arch/x86/kernel/time_32.c +++ b/arch/x86/kernel/time_32.c @@ -115,7 +115,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -extern void (*late_time_init)(void); /* Duplicate of time_init() below, with hpet_enable part added */ void __init hpet_time_init(void) { diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index b7ab3c335fae..fad3674b06a5 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -209,12 +209,6 @@ SECTIONS EXIT_DATA } -/* vdso blob that is mapped into user space */ - vdso_start = . ; - .vdso : AT(ADDR(.vdso) - LOAD_OFFSET) { *(.vdso) } - . = ALIGN(PAGE_SIZE); - vdso_end = .; - #ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(PAGE_SIZE); __initramfs_start = .; diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32 index cdd6828b5abb..b859047a6376 100644 --- a/arch/x86/pci/Makefile_32 +++ b/arch/x86/pci/Makefile_32 @@ -3,6 +3,7 @@ obj-y := i386.o init.o obj-$(CONFIG_PCI_BIOS) += pcbios.o obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_32.o direct.o mmconfig-shared.o obj-$(CONFIG_PCI_DIRECT) += direct.o +obj-$(CONFIG_PCI_OLPC) += olpc.o pci-y := fixup.o pci-$(CONFIG_ACPI) += acpi.o diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c index 3de9f9ba2da6..0f5f7dd2a620 100644 --- a/arch/x86/pci/init.c +++ b/arch/x86/pci/init.c @@ -14,6 +14,9 @@ static __init int pci_access_init(void) #ifdef CONFIG_PCI_MMCONFIG pci_mmcfg_init(type); #endif +#ifdef CONFIG_PCI_OLPC + pci_olpc_init(); +#endif if (raw_pci_ops) return 0; #ifdef CONFIG_PCI_BIOS diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c new file mode 100644 index 000000000000..5e7636558c02 --- /dev/null +++ b/arch/x86/pci/olpc.c @@ -0,0 +1,313 @@ +/* + * Low-level PCI config space access for OLPC systems who lack the VSA + * PCI virtualization software. + * + * Copyright © 2006 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The AMD Geode chipset (ie: GX2 processor, cs5536 I/O companion device) + * has some I/O functions (display, southbridge, sound, USB HCIs, etc) + * that more or less behave like PCI devices, but the hardware doesn't + * directly implement the PCI configuration space headers. AMD provides + * "VSA" (Virtual System Architecture) software that emulates PCI config + * space for these devices, by trapping I/O accesses to PCI config register + * (CF8/CFC) and running some code in System Management Mode interrupt state. + * On the OLPC platform, we don't want to use that VSA code because + * (a) it slows down suspend/resume, and (b) recompiling it requires special + * compilers that are hard to get. So instead of letting the complex VSA + * code simulate the PCI config registers for the on-chip devices, we + * just simulate them the easy way, by inserting the code into the + * pci_write_config and pci_read_config path. Most of the config registers + * are read-only anyway, so the bulk of the simulation is just table lookup. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <asm/olpc.h> +#include <asm/geode.h> +#include "pci.h" + +/* + * In the tables below, the first two line (8 longwords) are the + * size masks that are used when the higher level PCI code determines + * the size of the region by writing ~0 to a base address register + * and reading back the result. + * + * The following lines are the values that are read during normal + * PCI config access cycles, i.e. not after just having written + * ~0 to a base address register. + */ + +static const uint32_t lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + + 0x281022, 0x2200005, 0x6000021, 0x80f808, /* AMD Vendor ID */ + 0x0, 0x0, 0x0, 0x0, /* No virtual registers, hence no BAR */ + 0x0, 0x0, 0x0, 0x28100b, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, +}; + +static const uint32_t gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ + 0xfffffffd, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + + 0x28100b, 0x2200005, 0x6000021, 0x80f808, /* NSC Vendor ID */ + 0xac1d, 0x0, 0x0, 0x0, /* I/O BAR - base of virtual registers */ + 0x0, 0x0, 0x0, 0x28100b, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, +}; + +static const uint32_t lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ + 0xff000008, 0xffffc000, 0xffffc000, 0xffffc000, + 0xffffc000, 0x0, 0x0, 0x0, + + 0x20811022, 0x2200003, 0x3000000, 0x0, /* AMD Vendor ID */ + 0xfd000000, 0xfe000000, 0xfe004000, 0xfe008000, /* FB, GP, VG, DF */ + 0xfe00c000, 0x0, 0x0, 0x30100b, /* VIP */ + 0x0, 0x0, 0x0, 0x10e, /* INTA, IRQ14 for graphics accel */ + 0x0, 0x0, 0x0, 0x0, + 0x3d0, 0x3c0, 0xa0000, 0x0, /* VG IO, VG IO, EGA FB, MONO FB */ + 0x0, 0x0, 0x0, 0x0, +}; + +static const uint32_t gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ + 0xff800008, 0xffffc000, 0xffffc000, 0xffffc000, + 0x0, 0x0, 0x0, 0x0, + + 0x30100b, 0x2200003, 0x3000000, 0x0, /* NSC Vendor ID */ + 0xfd000000, 0xfe000000, 0xfe004000, 0xfe008000, /* FB, GP, VG, DF */ + 0x0, 0x0, 0x0, 0x30100b, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x3d0, 0x3c0, 0xa0000, 0x0, /* VG IO, VG IO, EGA FB, MONO FB */ + 0x0, 0x0, 0x0, 0x0, +}; + +static const uint32_t aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */ + 0xffffc000, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + + 0x20821022, 0x2a00006, 0x10100000, 0x8, /* NSC Vendor ID */ + 0xfe010000, 0x0, 0x0, 0x0, /* AES registers */ + 0x0, 0x0, 0x0, 0x20821022, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, +}; + + +static const uint32_t isa_hdr[] = { /* dev f function 0 - devfn = 78 */ + 0xfffffff9, 0xffffff01, 0xffffffc1, 0xffffffe1, + 0xffffff81, 0xffffffc1, 0x0, 0x0, + + 0x20901022, 0x2a00049, 0x6010003, 0x802000, + 0x18b1, 0x1001, 0x1801, 0x1881, /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */ + 0x1401, 0x1841, 0x0, 0x20901022, /* PMS-128 ACPI-64 */ + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0xaa5b, /* IRQ steering */ + 0x0, 0x0, 0x0, 0x0, +}; + +static const uint32_t ac97_hdr[] = { /* dev f function 3 - devfn = 7b */ + 0xffffff81, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + + 0x20931022, 0x2a00041, 0x4010001, 0x0, + 0x1481, 0x0, 0x0, 0x0, /* I/O BAR-128 */ + 0x0, 0x0, 0x0, 0x20931022, + 0x0, 0x0, 0x0, 0x205, /* IntB, IRQ5 */ + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, +}; + +static const uint32_t ohci_hdr[] = { /* dev f function 4 - devfn = 7c */ + 0xfffff000, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + + 0x20941022, 0x2300006, 0xc031002, 0x0, + 0xfe01a000, 0x0, 0x0, 0x0, /* MEMBAR-1000 */ + 0x0, 0x0, 0x0, 0x20941022, + 0x0, 0x40, 0x0, 0x40a, /* CapPtr INT-D, IRQA */ + 0xc8020001, 0x0, 0x0, 0x0, /* Capabilities - 40 is R/O, + 44 is mask 8103 (power control) */ + 0x0, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, +}; + +static const uint32_t ehci_hdr[] = { /* dev f function 4 - devfn = 7d */ + 0xfffff000, 0x0, 0x0, 0x0, + 0x0, 0x0, 0x0, 0x0, + + 0x20951022, 0x2300006, 0xc032002, 0x0, + 0xfe01b000, 0x0, 0x0, 0x0, /* MEMBAR-1000 */ + 0x0, 0x0, 0x0, 0x20951022, + 0x0, 0x40, 0x0, 0x40a, /* CapPtr INT-D, IRQA */ + 0xc8020001, 0x0, 0x0, 0x0, /* Capabilities - 40 is R/O, 44 is + mask 8103 (power control) */ +#if 0 + 0x1, 0x40080000, 0x0, 0x0, /* EECP - see EHCI spec section 2.1.7 */ +#endif + 0x01000001, 0x0, 0x0, 0x0, /* EECP - see EHCI spec section 2.1.7 */ + 0x2020, 0x0, 0x0, 0x0, /* (EHCI page 8) 60 SBRN (R/O), + 61 FLADJ (R/W), PORTWAKECAP */ +}; + +static uint32_t ff_loc = ~0; +static uint32_t zero_loc; +static int bar_probing; /* Set after a write of ~0 to a BAR */ +static int is_lx; + +#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */ +#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */ + +static int is_simulated(unsigned int bus, unsigned int devfn) +{ + return (!bus && ((PCI_SLOT(devfn) == NB_SLOT) || + (PCI_SLOT(devfn) == SB_SLOT))); +} + +static uint32_t *hdr_addr(const uint32_t *hdr, int reg) +{ + uint32_t addr; + + /* + * This is a little bit tricky. The header maps consist of + * 0x20 bytes of size masks, followed by 0x70 bytes of header data. + * In the normal case, when not probing a BAR's size, we want + * to access the header data, so we add 0x20 to the reg offset, + * thus skipping the size mask area. + * In the BAR probing case, we want to access the size mask for + * the BAR, so we subtract 0x10 (the config header offset for + * BAR0), and don't skip the size mask area. + */ + + addr = (uint32_t)hdr + reg + (bar_probing ? -0x10 : 0x20); + + bar_probing = 0; + return (uint32_t *)addr; +} + +static int pci_olpc_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, uint32_t *value) +{ + uint32_t *addr; + + /* Use the hardware mechanism for non-simulated devices */ + if (!is_simulated(bus, devfn)) + return pci_direct_conf1.read(seg, bus, devfn, reg, len, value); + + /* + * No device has config registers past 0x70, so we save table space + * by not storing entries for the nonexistent registers + */ + if (reg >= 0x70) + addr = &zero_loc; + else { + switch (devfn) { + case 0x8: + addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg); + break; + case 0x9: + addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg); + break; + case 0xa: + addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc; + break; + case 0x78: + addr = hdr_addr(isa_hdr, reg); + break; + case 0x7b: + addr = hdr_addr(ac97_hdr, reg); + break; + case 0x7c: + addr = hdr_addr(ohci_hdr, reg); + break; + case 0x7d: + addr = hdr_addr(ehci_hdr, reg); + break; + default: + addr = &ff_loc; + break; + } + } + switch (len) { + case 1: + *value = *(uint8_t *)addr; + break; + case 2: + *value = *(uint16_t *)addr; + break; + case 4: + *value = *addr; + break; + default: + BUG(); + } + + return 0; +} + +static int pci_olpc_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, uint32_t value) +{ + /* Use the hardware mechanism for non-simulated devices */ + if (!is_simulated(bus, devfn)) + return pci_direct_conf1.write(seg, bus, devfn, reg, len, value); + + /* XXX we may want to extend this to simulate EHCI power management */ + + /* + * Mostly we just discard writes, but if the write is a size probe + * (i.e. writing ~0 to a BAR), we remember it and arrange to return + * the appropriate size mask on the next read. This is cheating + * to some extent, because it depends on the fact that the next + * access after such a write will always be a read to the same BAR. + */ + + if ((reg >= 0x10) && (reg < 0x2c)) { + /* write is to a BAR */ + if (value == ~0) + bar_probing = 1; + } else { + /* + * No warning on writes to ROM BAR, CMD, LATENCY_TIMER, + * CACHE_LINE_SIZE, or PM registers. + */ + if ((reg != PCI_ROM_ADDRESS) && (reg != PCI_COMMAND_MASTER) && + (reg != PCI_LATENCY_TIMER) && + (reg != PCI_CACHE_LINE_SIZE) && (reg != 0x44)) + printk(KERN_WARNING "OLPC PCI: Config write to devfn" + " %x reg %x value %x\n", devfn, reg, value); + } + + return 0; +} + +static struct pci_raw_ops pci_olpc_conf = { + .read = pci_olpc_read, + .write = pci_olpc_write, +}; + +void __init pci_olpc_init(void) +{ + if (!machine_is_olpc() || olpc_has_vsa()) + return; + + printk(KERN_INFO "PCI: Using configuration type OLPC\n"); + raw_pci_ops = &pci_olpc_conf; + is_lx = is_geode_lx(); +} diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index c4bddaeff619..7d84e813e958 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h @@ -98,6 +98,7 @@ extern int pci_direct_probe(void); extern void pci_direct_init(int type); extern void pci_pcbios_init(void); extern void pci_mmcfg_init(int type); +extern void pci_olpc_init(void); /* pci-mmconfig.c */ diff --git a/arch/x86/vdso/vdso.S b/arch/x86/vdso/vdso.S index 4b1620a1529e..1d3aa6b87181 100644 --- a/arch/x86/vdso/vdso.S +++ b/arch/x86/vdso/vdso.S @@ -1,2 +1,10 @@ - .section ".vdso","a" +#include <linux/init.h> + +__INITDATA + + .globl vdso_start, vdso_end +vdso_start: .incbin "arch/x86/vdso/vdso.so" +vdso_end: + +__FINIT |
