diff options
Diffstat (limited to 'arch/x86/platform')
| -rw-r--r-- | arch/x86/platform/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/platform/ce4100/Makefile | 1 | ||||
| -rw-r--r-- | arch/x86/platform/ce4100/ce4100.c | 132 | ||||
| -rw-r--r-- | arch/x86/platform/iris/Makefile | 1 | ||||
| -rw-r--r-- | arch/x86/platform/iris/iris.c | 91 | ||||
| -rw-r--r-- | arch/x86/platform/mrst/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/platform/mrst/early_printk_mrst.c | 319 | ||||
| -rw-r--r-- | arch/x86/platform/mrst/mrst.c | 576 | ||||
| -rw-r--r-- | arch/x86/platform/mrst/vrtc.c | 165 | ||||
| -rw-r--r-- | arch/x86/platform/sfi/sfi.c | 17 | ||||
| -rw-r--r-- | arch/x86/platform/uv/tlb_uv.c | 22 | ||||
| -rw-r--r-- | arch/x86/platform/visws/visws_quirks.c | 2 |
12 files changed, 1272 insertions, 58 deletions
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index 7bf70b812fa2..021eee91c056 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -1,5 +1,7 @@ # Platform specific code goes here +obj-y += ce4100/ obj-y += efi/ +obj-y += iris/ obj-y += mrst/ obj-y += olpc/ obj-y += scx200/ diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile new file mode 100644 index 000000000000..91fc92971d94 --- /dev/null +++ b/arch/x86/platform/ce4100/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_X86_INTEL_CE) += ce4100.o diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c new file mode 100644 index 000000000000..d2c0d51a7178 --- /dev/null +++ b/arch/x86/platform/ce4100/ce4100.c @@ -0,0 +1,132 @@ +/* + * Intel CE4100 platform specific setup code + * + * (C) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/serial_reg.h> +#include <linux/serial_8250.h> + +#include <asm/setup.h> +#include <asm/io.h> + +static int ce4100_i8042_detect(void) +{ + return 0; +} + +static void __init sdv_find_smp_config(void) +{ +} + +#ifdef CONFIG_SERIAL_8250 + + +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readl(p->membase + offset); +} + +/* + * The UART Tx interrupts are not set under some conditions and therefore serial + * transmission hangs. This is a silicon issue and has not been root caused. The + * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT + * bit of LSR register in interrupt handler to see whether at least one of these + * two bits is set, if so then process the transmit request. If this workaround + * is not applied, then the serial transmission may hang. This workaround is for + * errata number 9 in Errata - B step. +*/ + +static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset) +{ + unsigned int ret, ier, lsr; + + if (offset == UART_IIR) { + offset = offset << p->regshift; + ret = readl(p->membase + offset); + if (ret & UART_IIR_NO_INT) { + /* see if the TX interrupt should have really set */ + ier = mem_serial_in(p, UART_IER); + /* see if the UART's XMIT interrupt is enabled */ + if (ier & UART_IER_THRI) { + lsr = mem_serial_in(p, UART_LSR); + /* now check to see if the UART should be + generating an interrupt (but isn't) */ + if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) + ret &= ~UART_IIR_NO_INT; + } + } + } else + ret = mem_serial_in(p, offset); + return ret; +} + +static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writel(value, p->membase + offset); +} + +static void ce4100_serial_fixup(int port, struct uart_port *up, + unsigned short *capabilites) +{ +#ifdef CONFIG_EARLY_PRINTK + /* + * Over ride the legacy port configuration that comes from + * asm/serial.h. Using the ioport driver then switching to the + * PCI memmaped driver hangs the IOAPIC + */ + if (up->iotype != UPIO_MEM32) { + up->uartclk = 14745600; + up->mapbase = 0xdffe0200; + set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, + up->mapbase & PAGE_MASK); + up->membase = + (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + up->membase += up->mapbase & ~PAGE_MASK; + up->iotype = UPIO_MEM32; + up->regshift = 2; + } +#endif + up->iobase = 0; + up->serial_in = ce4100_mem_serial_in; + up->serial_out = ce4100_mem_serial_out; + + *capabilites |= (1 << 12); +} + +static __init void sdv_serial_fixup(void) +{ + serial8250_set_isa_configurator(ce4100_serial_fixup); +} + +#else +static inline void sdv_serial_fixup(void); +#endif + +static void __init sdv_arch_setup(void) +{ + sdv_serial_fixup(); +} + +/* + * CE4100 specific x86_init function overrides and early setup + * calls. + */ +void __init x86_ce4100_early_setup(void) +{ + x86_init.oem.arch_setup = sdv_arch_setup; + x86_platform.i8042_detect = ce4100_i8042_detect; + x86_init.resources.probe_roms = x86_init_noop; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; + x86_init.mpparse.find_smp_config = sdv_find_smp_config; +} diff --git a/arch/x86/platform/iris/Makefile b/arch/x86/platform/iris/Makefile new file mode 100644 index 000000000000..db921983a102 --- /dev/null +++ b/arch/x86/platform/iris/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_X86_32_IRIS) += iris.o diff --git a/arch/x86/platform/iris/iris.c b/arch/x86/platform/iris/iris.c new file mode 100644 index 000000000000..1ba7f5ed8c9b --- /dev/null +++ b/arch/x86/platform/iris/iris.c @@ -0,0 +1,91 @@ +/* + * Eurobraille/Iris power off support. + * + * Eurobraille's Iris machine is a PC with no APM or ACPI support. + * It is shutdown by a special I/O sequence which this module provides. + * + * Copyright (C) Shérab <Sebastien.Hinderer@ens-lyon.org> + * + * This program is free software ; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation ; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY ; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the program ; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/moduleparam.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pm.h> +#include <asm/io.h> + +#define IRIS_GIO_BASE 0x340 +#define IRIS_GIO_INPUT IRIS_GIO_BASE +#define IRIS_GIO_OUTPUT (IRIS_GIO_BASE + 1) +#define IRIS_GIO_PULSE 0x80 /* First byte to send */ +#define IRIS_GIO_REST 0x00 /* Second byte to send */ +#define IRIS_GIO_NODEV 0xff /* Likely not an Iris */ + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sébastien Hinderer <Sebastien.Hinderer@ens-lyon.org>"); +MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille"); +MODULE_SUPPORTED_DEVICE("Eurobraille/Iris"); + +static int force; + +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Set to one to force poweroff handler installation."); + +static void (*old_pm_power_off)(void); + +static void iris_power_off(void) +{ + outb(IRIS_GIO_PULSE, IRIS_GIO_OUTPUT); + msleep(850); + outb(IRIS_GIO_REST, IRIS_GIO_OUTPUT); +} + +/* + * Before installing the power_off handler, try to make sure the OS is + * running on an Iris. Since Iris does not support DMI, this is done + * by reading its input port and seeing whether the read value is + * meaningful. + */ +static int iris_init(void) +{ + unsigned char status; + if (force != 1) { + printk(KERN_ERR "The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.\n"); + return -ENODEV; + } + status = inb(IRIS_GIO_INPUT); + if (status == IRIS_GIO_NODEV) { + printk(KERN_ERR "This machine does not seem to be an Iris. Power_off handler not installed.\n"); + return -ENODEV; + } + old_pm_power_off = pm_power_off; + pm_power_off = &iris_power_off; + printk(KERN_INFO "Iris power_off handler installed.\n"); + + return 0; +} + +static void iris_exit(void) +{ + pm_power_off = old_pm_power_off; + printk(KERN_INFO "Iris power_off handler uninstalled.\n"); +} + +module_init(iris_init); +module_exit(iris_exit); diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile index efbbc552fa95..f61ccdd49341 100644 --- a/arch/x86/platform/mrst/Makefile +++ b/arch/x86/platform/mrst/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_X86_MRST) += mrst.o +obj-$(CONFIG_X86_MRST) += vrtc.o +obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c new file mode 100644 index 000000000000..25bfdbb5b130 --- /dev/null +++ b/arch/x86/platform/mrst/early_printk_mrst.c @@ -0,0 +1,319 @@ +/* + * early_printk_mrst.c - early consoles for Intel MID platforms + * + * Copyright (c) 2008-2010, Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +/* + * This file implements two early consoles named mrst and hsu. + * mrst is based on Maxim3110 spi-uart device, it exists in both + * Moorestown and Medfield platforms, while hsu is based on a High + * Speed UART device which only exists in the Medfield platform + */ + +#include <linux/serial_reg.h> +#include <linux/serial_mfd.h> +#include <linux/kmsg_dump.h> +#include <linux/console.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fixmap.h> +#include <asm/pgtable.h> +#include <asm/mrst.h> + +#define MRST_SPI_TIMEOUT 0x200000 +#define MRST_REGBASE_SPI0 0xff128000 +#define MRST_REGBASE_SPI1 0xff128400 +#define MRST_CLK_SPI0_REG 0xff11d86c + +/* Bit fields in CTRLR0 */ +#define SPI_DFS_OFFSET 0 + +#define SPI_FRF_OFFSET 4 +#define SPI_FRF_SPI 0x0 +#define SPI_FRF_SSP 0x1 +#define SPI_FRF_MICROWIRE 0x2 +#define SPI_FRF_RESV 0x3 + +#define SPI_MODE_OFFSET 6 +#define SPI_SCPH_OFFSET 6 +#define SPI_SCOL_OFFSET 7 +#define SPI_TMOD_OFFSET 8 +#define SPI_TMOD_TR 0x0 /* xmit & recv */ +#define SPI_TMOD_TO 0x1 /* xmit only */ +#define SPI_TMOD_RO 0x2 /* recv only */ +#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ + +#define SPI_SLVOE_OFFSET 10 +#define SPI_SRL_OFFSET 11 +#define SPI_CFS_OFFSET 12 + +/* Bit fields in SR, 7 bits */ +#define SR_MASK 0x7f /* cover 7 bits */ +#define SR_BUSY (1 << 0) +#define SR_TF_NOT_FULL (1 << 1) +#define SR_TF_EMPT (1 << 2) +#define SR_RF_NOT_EMPT (1 << 3) +#define SR_RF_FULL (1 << 4) +#define SR_TX_ERR (1 << 5) +#define SR_DCOL (1 << 6) + +struct dw_spi_reg { + u32 ctrl0; + u32 ctrl1; + u32 ssienr; + u32 mwcr; + u32 ser; + u32 baudr; + u32 txfltr; + u32 rxfltr; + u32 txflr; + u32 rxflr; + u32 sr; + u32 imr; + u32 isr; + u32 risr; + u32 txoicr; + u32 rxoicr; + u32 rxuicr; + u32 msticr; + u32 icr; + u32 dmacr; + u32 dmatdlr; + u32 dmardlr; + u32 idr; + u32 version; + + /* Currently operates as 32 bits, though only the low 16 bits matter */ + u32 dr; +} __packed; + +#define dw_readl(dw, name) __raw_readl(&(dw)->name) +#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name) + +/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */ +static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0; + +static u32 *pclk_spi0; +/* Always contains an accessible address, start with 0 */ +static struct dw_spi_reg *pspi; + +static struct kmsg_dumper dw_dumper; +static int dumper_registered; + +static void dw_kmsg_dump(struct kmsg_dumper *dumper, + enum kmsg_dump_reason reason, + const char *s1, unsigned long l1, + const char *s2, unsigned long l2) +{ + int i; + + /* When run to this, we'd better re-init the HW */ + mrst_early_console_init(); + + for (i = 0; i < l1; i++) + early_mrst_console.write(&early_mrst_console, s1 + i, 1); + for (i = 0; i < l2; i++) + early_mrst_console.write(&early_mrst_console, s2 + i, 1); +} + +/* Set the ratio rate to 115200, 8n1, IRQ disabled */ +static void max3110_write_config(void) +{ + u16 config; + + config = 0xc001; + dw_writel(pspi, dr, config); +} + +/* Translate char to a eligible word and send to max3110 */ +static void max3110_write_data(char c) +{ + u16 data; + + data = 0x8000 | c; + dw_writel(pspi, dr, data); +} + +void mrst_early_console_init(void) +{ + u32 ctrlr0 = 0; + u32 spi0_cdiv; + u32 freq; /* Freqency info only need be searched once */ + + /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */ + pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, + MRST_CLK_SPI0_REG); + spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9; + freq = 100000000 / (spi0_cdiv + 1); + + if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL) + mrst_spi_paddr = MRST_REGBASE_SPI1; + + pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, + mrst_spi_paddr); + + /* Disable SPI controller */ + dw_writel(pspi, ssienr, 0); + + /* Set control param, 8 bits, transmit only mode */ + ctrlr0 = dw_readl(pspi, ctrl0); + + ctrlr0 &= 0xfcc0; + ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET) + | (SPI_TMOD_TO << SPI_TMOD_OFFSET); + dw_writel(pspi, ctrl0, ctrlr0); + + /* + * Change the spi0 clk to comply with 115200 bps, use 100000 to + * calculate the clk dividor to make the clock a little slower + * than real baud rate. + */ + dw_writel(pspi, baudr, freq/100000); + + /* Disable all INT for early phase */ + dw_writel(pspi, imr, 0x0); + + /* Set the cs to spi-uart */ + dw_writel(pspi, ser, 0x2); + + /* Enable the HW, the last step for HW init */ + dw_writel(pspi, ssienr, 0x1); + + /* Set the default configuration */ + max3110_write_config(); + + /* Register the kmsg dumper */ + if (!dumper_registered) { + dw_dumper.dump = dw_kmsg_dump; + kmsg_dump_register(&dw_dumper); + dumper_registered = 1; + } +} + +/* Slave select should be called in the read/write function */ +static void early_mrst_spi_putc(char c) +{ + unsigned int timeout; + u32 sr; + + timeout = MRST_SPI_TIMEOUT; + /* Early putc needs to make sure the TX FIFO is not full */ + while (--timeout) { + sr = dw_readl(pspi, sr); + if (!(sr & SR_TF_NOT_FULL)) + cpu_relax(); + else + break; + } + + if (!timeout) + pr_warning("MRST earlycon: timed out\n"); + else + max3110_write_data(c); +} + +/* Early SPI only uses polling mode */ +static void early_mrst_spi_write(struct console *con, const char *str, unsigned n) +{ + int i; + + for (i = 0; i < n && *str; i++) { + if (*str == '\n') + early_mrst_spi_putc('\r'); + early_mrst_spi_putc(*str); + str++; + } +} + +struct console early_mrst_console = { + .name = "earlymrst", + .write = early_mrst_spi_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* + * Following is the early console based on Medfield HSU (High + * Speed UART) device. + */ +#define HSU_PORT2_PADDR 0xffa28180 + +static void __iomem *phsu; + +void hsu_early_console_init(void) +{ + u8 lcr; + + phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, + HSU_PORT2_PADDR); + + /* Disable FIFO */ + writeb(0x0, phsu + UART_FCR); + + /* Set to default 115200 bps, 8n1 */ + lcr = readb(phsu + UART_LCR); + writeb((0x80 | lcr), phsu + UART_LCR); + writeb(0x18, phsu + UART_DLL); + writeb(lcr, phsu + UART_LCR); + writel(0x3600, phsu + UART_MUL*4); + + writeb(0x8, phsu + UART_MCR); + writeb(0x7, phsu + UART_FCR); + writeb(0x3, phsu + UART_LCR); + + /* Clear IRQ status */ + readb(phsu + UART_LSR); + readb(phsu + UART_RX); + readb(phsu + UART_IIR); + readb(phsu + UART_MSR); + + /* Enable FIFO */ + writeb(0x7, phsu + UART_FCR); +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void early_hsu_putc(char ch) +{ + unsigned int timeout = 10000; /* 10ms */ + u8 status; + + while (--timeout) { + status = readb(phsu + UART_LSR); + if (status & BOTH_EMPTY) + break; + udelay(1); + } + + /* Only write the char when there was no timeout */ + if (timeout) + writeb(ch, phsu + UART_TX); +} + +static void early_hsu_write(struct console *con, const char *str, unsigned n) +{ + int i; + + for (i = 0; i < n && *str; i++) { + if (*str == '\n') + early_hsu_putc('\r'); + early_hsu_putc(*str); + str++; + } +} + +struct console early_hsu_console = { + .name = "earlyhsu", + .write = early_hsu_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 79ae68154e87..ea6529e93c6f 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -9,9 +9,19 @@ * as published by the Free Software Foundation; version 2 * of the License. */ + +#define pr_fmt(fmt) "mrst: " fmt + #include <linux/init.h> #include <linux/kernel.h> #include <linux/sfi.h> +#include <linux/intel_pmic_gpio.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> #include <linux/irq.h> #include <linux/module.h> @@ -23,7 +33,9 @@ #include <asm/mrst.h> #include <asm/io.h> #include <asm/i8259.h> +#include <asm/intel_scu_ipc.h> #include <asm/apb_timer.h> +#include <asm/reboot.h> /* * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, @@ -59,32 +71,6 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; EXPORT_SYMBOL_GPL(sfi_mrtc_array); int sfi_mrtc_num; -static inline void assign_to_mp_irq(struct mpc_intsrc *m, - struct mpc_intsrc *mp_irq) -{ - memcpy(mp_irq, m, sizeof(struct mpc_intsrc)); -} - -static inline int mp_irq_cmp(struct mpc_intsrc *mp_irq, - struct mpc_intsrc *m) -{ - return memcmp(mp_irq, m, sizeof(struct mpc_intsrc)); -} - -static void save_mp_irq(struct mpc_intsrc *m) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - if (!mp_irq_cmp(&mp_irqs[i], m)) - return; - } - - assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} - /* parse all the mtimer info to a static mtimer array */ static int __init sfi_parse_mtmr(struct sfi_table_header *table) { @@ -102,10 +88,10 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table) memcpy(sfi_mtimer_array, pentry, totallen); } - printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num); + pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); pentry = sfi_mtimer_array; for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { - printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz," + pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz," " irq = %d\n", totallen, (u32)pentry->phys_addr, pentry->freq_hz, pentry->irq); if (!pentry->irq) @@ -118,7 +104,7 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table) mp_irq.srcbusirq = pentry->irq; /* IRQ */ mp_irq.dstapic = MP_APIC_ALL; mp_irq.dstirq = pentry->irq; - save_mp_irq(&mp_irq); + mp_save_irq(&mp_irq); } return 0; @@ -176,19 +162,19 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) memcpy(sfi_mrtc_array, pentry, totallen); } - printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num); + pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); pentry = sfi_mrtc_array; for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { - printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n", + pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", totallen, (u32)pentry->phys_addr, pentry->irq); mp_irq.type = MP_IOAPIC; mp_irq.irqtype = mp_INT; - mp_irq.irqflag = 0; + mp_irq.irqflag = 0xf; /* level trigger and active low */ mp_irq.srcbus = 0; mp_irq.srcbusirq = pentry->irq; /* IRQ */ mp_irq.dstapic = MP_APIC_ALL; mp_irq.dstirq = pentry->irq; - save_mp_irq(&mp_irq); + mp_save_irq(&mp_irq); } return 0; } @@ -209,6 +195,7 @@ static unsigned long __init mrst_calibrate_tsc(void) void __init mrst_time_init(void) { + sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); switch (mrst_timer_options) { case MRST_TIMER_APBT_ONLY: break; @@ -224,16 +211,10 @@ void __init mrst_time_init(void) return; } /* we need at least one APB timer */ - sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); pre_init_apic_IRQ0(); apbt_time_init(); } -void __init mrst_rtc_init(void) -{ - sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); -} - void __cpuinit mrst_arch_setup(void) { if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) @@ -256,6 +237,17 @@ static int mrst_i8042_detect(void) return 0; } +/* Reboot and power off are handled by the SCU on a MID device */ +static void mrst_power_off(void) +{ + intel_scu_ipc_simple_command(0xf1, 1); +} + +static void mrst_reboot(void) +{ + intel_scu_ipc_simple_command(0xf1, 0); +} + /* * Moorestown specific x86_init function overrides and early setup * calls. @@ -281,6 +273,10 @@ void __init x86_mrst_early_setup(void) legacy_pic = &null_legacy_pic; + /* Moorestown specific power_off/restart method */ + pm_power_off = mrst_power_off; + machine_ops.emergency_restart = mrst_reboot; + /* Avoid searching for BIOS MP tables */ x86_init.mpparse.find_smp_config = x86_init_noop; x86_init.mpparse.get_smp_config = x86_init_uint_noop; @@ -309,3 +305,505 @@ static inline int __init setup_x86_mrst_timer(char *arg) return 0; } __setup("x86_mrst_timer=", setup_x86_mrst_timer); + +/* + * Parsing GPIO table first, since the DEVS table will need this table + * to map the pin name to the actual pin. + */ +static struct sfi_gpio_table_entry *gpio_table; +static int gpio_num_entry; + +static int __init sfi_parse_gpio(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_gpio_table_entry *pentry; + int num, i; + + if (gpio_table) + return 0; + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); + pentry = (struct sfi_gpio_table_entry *)sb->pentry; + + gpio_table = (struct sfi_gpio_table_entry *) + kmalloc(num * sizeof(*pentry), GFP_KERNEL); + if (!gpio_table) + return -1; + memcpy(gpio_table, pentry, num * sizeof(*pentry)); + gpio_num_entry = num; + + pr_debug("GPIO pin info:\n"); + for (i = 0; i < num; i++, pentry++) + pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," + " pin = %d\n", i, + pentry->controller_name, + pentry->pin_name, + pentry->pin_no); + return 0; +} + +static int get_gpio_by_name(const char *name) +{ + struct sfi_gpio_table_entry *pentry = gpio_table; + int i; + + if (!pentry) + return -1; + for (i = 0; i < gpio_num_entry; i++, pentry++) { + if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) + return pentry->pin_no; + } + return -1; +} + +/* + * Here defines the array of devices platform data that IAFW would export + * through SFI "DEVS" table, we use name and type to match the device and + * its platform data. + */ +struct devs_id { + char name[SFI_NAME_LEN + 1]; + u8 type; + u8 delay; + void *(*get_platform_data)(void *info); +}; + +/* the offset for the mapping of global gpio pin to irq */ +#define MRST_IRQ_OFFSET 0x100 + +static void __init *pmic_gpio_platform_data(void *info) +{ + static struct intel_pmic_gpio_platform_data pmic_gpio_pdata; + int gpio_base = get_gpio_by_name("pmic_gpio_base"); + + if (gpio_base == -1) + gpio_base = 64; + pmic_gpio_pdata.gpio_base = gpio_base; + pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET; + pmic_gpio_pdata.gpiointr = 0xffffeff8; + + return &pmic_gpio_pdata; +} + +static void __init *max3111_platform_data(void *info) +{ + struct spi_board_info *spi_info = info; + int intr = get_gpio_by_name("max3111_int"); + + if (intr == -1) + return NULL; + spi_info->irq = intr + MRST_IRQ_OFFSET; + return NULL; +} + +/* we have multiple max7315 on the board ... */ +#define MAX7315_NUM 2 +static void __init *max7315_platform_data(void *info) +{ + static struct pca953x_platform_data max7315_pdata[MAX7315_NUM]; + static int nr; + struct pca953x_platform_data *max7315 = &max7315_pdata[nr]; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + if (nr == MAX7315_NUM) { + pr_err("too many max7315s, we only support %d\n", + MAX7315_NUM); + return NULL; + } + /* we have several max7315 on the board, we only need load several + * instances of the same pca953x driver to cover them + */ + strcpy(i2c_info->type, "max7315"); + if (nr++) { + sprintf(base_pin_name, "max7315_%d_base", nr); + sprintf(intr_pin_name, "max7315_%d_int", nr); + } else { + strcpy(base_pin_name, "max7315_base"); + strcpy(intr_pin_name, "max7315_int"); + } + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + max7315->gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + MRST_IRQ_OFFSET; + max7315->irq_base = gpio_base + MRST_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + max7315->irq_base = -1; + } + return max7315; +} + +static void __init *emc1403_platform_data(void *info) +{ + static short intr2nd_pdata; + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("thermal_int"); + int intr2nd = get_gpio_by_name("thermal_alert"); + + if (intr == -1 || intr2nd == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; + + return &intr2nd_pdata; +} + +static void __init *lis331dl_platform_data(void *info) +{ + static short intr2nd_pdata; + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("accel_int"); + int intr2nd = get_gpio_by_name("accel_2"); + + if (intr == -1 || intr2nd == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; + + return &intr2nd_pdata; +} + +static void __init *no_platform_data(void *info) +{ + return NULL; +} + +static const struct devs_id __initconst device_ids[] = { + {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, + {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, + {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, + {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, + {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {}, +}; + +#define MAX_IPCDEVS 24 +static struct platform_device *ipc_devs[MAX_IPCDEVS]; +static int ipc_next_dev; + +#define MAX_SCU_SPI 24 +static struct spi_board_info *spi_devs[MAX_SCU_SPI]; +static int spi_next_dev; + +#define MAX_SCU_I2C 24 +static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; +static int i2c_bus[MAX_SCU_I2C]; +static int i2c_next_dev; + +static void __init intel_scu_device_register(struct platform_device *pdev) +{ + if(ipc_next_dev == MAX_IPCDEVS) + pr_err("too many SCU IPC devices"); + else + ipc_devs[ipc_next_dev++] = pdev; +} + +static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) +{ + struct spi_board_info *new_dev; + + if (spi_next_dev == MAX_SCU_SPI) { + pr_err("too many SCU SPI devices"); + return; + } + + new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed spi dev %s\n", + sdev->modalias); + return; + } + memcpy(new_dev, sdev, sizeof(*sdev)); + + spi_devs[spi_next_dev++] = new_dev; +} + +static void __init intel_scu_i2c_device_register(int bus, + struct i2c_board_info *idev) +{ + struct i2c_board_info *new_dev; + + if (i2c_next_dev == MAX_SCU_I2C) { + pr_err("too many SCU I2C devices"); + return; + } + + new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed i2c dev %s\n", + idev->type); + return; + } + memcpy(new_dev, idev, sizeof(*idev)); + + i2c_bus[i2c_next_dev] = bus; + i2c_devs[i2c_next_dev++] = new_dev; +} + +/* Called by IPC driver */ +void intel_scu_devices_create(void) +{ + int i; + + for (i = 0; i < ipc_next_dev; i++) + platform_device_add(ipc_devs[i]); + + for (i = 0; i < spi_next_dev; i++) + spi_register_board_info(spi_devs[i], 1); + + for (i = 0; i < i2c_next_dev; i++) { + struct i2c_adapter *adapter; + struct i2c_client *client; + + adapter = i2c_get_adapter(i2c_bus[i]); + if (adapter) { + client = i2c_new_device(adapter, i2c_devs[i]); + if (!client) + pr_err("can't create i2c device %s\n", + i2c_devs[i]->type); + } else + i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); + } +} +EXPORT_SYMBOL_GPL(intel_scu_devices_create); + +/* Called by IPC driver */ +void intel_scu_devices_destroy(void) +{ + int i; + + for (i = 0; i < ipc_next_dev; i++) + platform_device_del(ipc_devs[i]); +} +EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); + +static void __init install_irq_resource(struct platform_device *pdev, int irq) +{ + /* Single threaded */ + static struct resource __initdata res = { + .name = "IRQ", + .flags = IORESOURCE_IRQ, + }; + res.start = irq; + platform_device_add_resources(pdev, &res, 1); +} + +static void __init sfi_handle_ipc_dev(struct platform_device *pdev) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_IPC && + !strncmp(dev->name, pdev->name, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(pdev); + break; + } + dev++; + } + pdev->dev.platform_data = pdata; + intel_scu_device_register(pdev); +} + +static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_SPI && + !strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(spi_info); + break; + } + dev++; + } + spi_info->platform_data = pdata; + if (dev->delay) + intel_scu_spi_device_register(spi_info); + else + spi_register_board_info(spi_info, 1); +} + +static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_I2C && + !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(i2c_info); + break; + } + dev++; + } + i2c_info->platform_data = pdata; + + if (dev->delay) + intel_scu_i2c_device_register(bus, i2c_info); + else + i2c_register_board_info(bus, i2c_info, 1); + } + + +static int __init sfi_parse_devs(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_device_table_entry *pentry; + struct spi_board_info spi_info; + struct i2c_board_info i2c_info; + struct platform_device *pdev; + int num, i, bus; + int ioapic; + struct io_apic_irq_attr irq_attr; + + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); + pentry = (struct sfi_device_table_entry *)sb->pentry; + + for (i = 0; i < num; i++, pentry++) { + if (pentry->irq != (u8)0xff) { /* native RTE case */ + /* these SPI2 devices are not exposed to system as PCI + * devices, but they have separate RTE entry in IOAPIC + * so we have to enable them one by one here + */ + ioapic = mp_find_ioapic(pentry->irq); + irq_attr.ioapic = ioapic; + irq_attr.ioapic_pin = pentry->irq; + irq_attr.trigger = 1; + irq_attr.polarity = 1; + io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr); + } + switch (pentry->type) { + case SFI_DEV_TYPE_IPC: + /* ID as IRQ is a hack that will go away */ + pdev = platform_device_alloc(pentry->name, pentry->irq); + if (pdev == NULL) { + pr_err("out of memory for SFI platform device '%s'.\n", + pentry->name); + continue; + } + install_irq_resource(pdev, pentry->irq); + pr_debug("info[%2d]: IPC bus, name = %16.16s, " + "irq = 0x%2x\n", i, pentry->name, pentry->irq); + sfi_handle_ipc_dev(pdev); + break; + case SFI_DEV_TYPE_SPI: + memset(&spi_info, 0, sizeof(spi_info)); + strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); + spi_info.irq = pentry->irq; + spi_info.bus_num = pentry->host_num; + spi_info.chip_select = pentry->addr; + spi_info.max_speed_hz = pentry->max_freq; + pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, " + "irq = 0x%2x, max_freq = %d, cs = %d\n", i, + spi_info.bus_num, + spi_info.modalias, + spi_info.irq, + spi_info.max_speed_hz, + spi_info.chip_select); + sfi_handle_spi_dev(&spi_info); + break; + case SFI_DEV_TYPE_I2C: + memset(&i2c_info, 0, sizeof(i2c_info)); + bus = pentry->host_num; + strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); + i2c_info.irq = pentry->irq; + i2c_info.addr = pentry->addr; + pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, " + "irq = 0x%2x, addr = 0x%x\n", i, bus, + i2c_info.type, + i2c_info.irq, + i2c_info.addr); + sfi_handle_i2c_dev(bus, &i2c_info); + break; + case SFI_DEV_TYPE_UART: + case SFI_DEV_TYPE_HSI: + default: + ; + } + } + return 0; +} + +static int __init mrst_platform_init(void) +{ + sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); + sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); + return 0; +} +arch_initcall(mrst_platform_init); + +/* + * we will search these buttons in SFI GPIO table (by name) + * and register them dynamically. Please add all possible + * buttons here, we will shrink them if no GPIO found. + */ +static struct gpio_keys_button gpio_button[] = { + {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000}, + {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20}, + {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20}, + {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20}, + {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20}, + {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20}, + {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20}, + {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20}, + {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20}, + {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20}, +}; + +static struct gpio_keys_platform_data mrst_gpio_keys = { + .buttons = gpio_button, + .rep = 1, + .nbuttons = -1, /* will fill it after search */ +}; + +static struct platform_device pb_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mrst_gpio_keys, + }, +}; + +/* + * Shrink the non-existent buttons, register the gpio button + * device if there is some + */ +static int __init pb_keys_init(void) +{ + struct gpio_keys_button *gb = gpio_button; + int i, num, good = 0; + + num = sizeof(gpio_button) / sizeof(struct gpio_keys_button); + for (i = 0; i < num; i++) { + gb[i].gpio = get_gpio_by_name(gb[i].desc); + if (gb[i].gpio == -1) + continue; + + if (i != good) + gb[good] = gb[i]; + good++; + } + + if (good) { + mrst_gpio_keys.nbuttons = good; + return platform_device_register(&pb_device); + } + return 0; +} +late_initcall(pb_keys_init); diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c new file mode 100644 index 000000000000..32cd7edd71a0 --- /dev/null +++ b/arch/x86/platform/mrst/vrtc.c @@ -0,0 +1,165 @@ +/* + * vrtc.c: Driver for virtual RTC device on Intel MID platform + * + * (C) Copyright 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + * Note: + * VRTC is emulated by system controller firmware, the real HW + * RTC is located in the PMIC device. SCU FW shadows PMIC RTC + * in a memory mapped IO space that is visible to the host IA + * processor. + * + * This driver is based on RTC CMOS driver. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sfi.h> +#include <linux/platform_device.h> + +#include <asm/mrst.h> +#include <asm/mrst-vrtc.h> +#include <asm/time.h> +#include <asm/fixmap.h> + +static unsigned char __iomem *vrtc_virt_base; + +unsigned char vrtc_cmos_read(unsigned char reg) +{ + unsigned char retval; + + /* vRTC's registers range from 0x0 to 0xD */ + if (reg > 0xd || !vrtc_virt_base) + return 0xff; + + lock_cmos_prefix(reg); + retval = __raw_readb(vrtc_virt_base + (reg << 2)); + lock_cmos_suffix(reg); + return retval; +} +EXPORT_SYMBOL_GPL(vrtc_cmos_read); + +void vrtc_cmos_write(unsigned char val, unsigned char reg) +{ + if (reg > 0xd || !vrtc_virt_base) + return; + + lock_cmos_prefix(reg); + __raw_writeb(val, vrtc_virt_base + (reg << 2)); + lock_cmos_suffix(reg); +} +EXPORT_SYMBOL_GPL(vrtc_cmos_write); + +unsigned long vrtc_get_time(void) +{ + u8 sec, min, hour, mday, mon; + u32 year; + + while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP)) + cpu_relax(); + + sec = vrtc_cmos_read(RTC_SECONDS); + min = vrtc_cmos_read(RTC_MINUTES); + hour = vrtc_cmos_read(RTC_HOURS); + mday = vrtc_cmos_read(RTC_DAY_OF_MONTH); + mon = vrtc_cmos_read(RTC_MONTH); + year = vrtc_cmos_read(RTC_YEAR); + + /* vRTC YEAR reg contains the offset to 1960 */ + year += 1960; + + printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d " + "mon: %d year: %d\n", sec, min, hour, mday, mon, year); + + return mktime(year, mon, mday, hour, min, sec); +} + +/* Only care about the minutes and seconds */ +int vrtc_set_mmss(unsigned long nowtime) +{ + int real_sec, real_min; + int vrtc_min; + + vrtc_min = vrtc_cmos_read(RTC_MINUTES); + + real_sec = nowtime % 60; + real_min = nowtime / 60; + if (((abs(real_min - vrtc_min) + 15)/30) & 1) + real_min += 30; + real_min %= 60; + + vrtc_cmos_write(real_sec, RTC_SECONDS); + vrtc_cmos_write(real_min, RTC_MINUTES); + return 0; +} + +void __init mrst_rtc_init(void) +{ + unsigned long rtc_paddr; + void __iomem *virt_base; + + sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); + if (!sfi_mrtc_num) + return; + + rtc_paddr = sfi_mrtc_array[0].phys_addr; + + /* vRTC's register address may not be page aligned */ + set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr); + + virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC); + virt_base += rtc_paddr & ~PAGE_MASK; + vrtc_virt_base = virt_base; + + x86_platform.get_wallclock = vrtc_get_time; + x86_platform.set_wallclock = vrtc_set_mmss; +} + +/* + * The Moorestown platform has a memory mapped virtual RTC device that emulates + * the programming interface of the RTC. + */ + +static struct resource vrtc_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device vrtc_device = { + .name = "rtc_mrst", + .id = -1, + .resource = vrtc_resources, + .num_resources = ARRAY_SIZE(vrtc_resources), +}; + +/* Register the RTC device if appropriate */ +static int __init mrst_device_create(void) +{ + /* No Moorestown, no device */ + if (!mrst_identify_cpu()) + return -ENODEV; + /* No timer, no device */ + if (!sfi_mrtc_num) + return -ENODEV; + + /* iomem resource */ + vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr; + vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr + + MRST_VRTC_MAP_SZ; + /* irq resource */ + vrtc_resources[1].start = sfi_mrtc_array[0].irq; + vrtc_resources[1].end = sfi_mrtc_array[0].irq; + + return platform_device_register(&vrtc_device); +} + +module_init(mrst_device_create); diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c index dd4c281ffe57..7785b72ecc3a 100644 --- a/arch/x86/platform/sfi/sfi.c +++ b/arch/x86/platform/sfi/sfi.c @@ -34,23 +34,12 @@ #ifdef CONFIG_X86_LOCAL_APIC static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; -static void __init mp_sfi_register_lapic_address(unsigned long address) -{ - mp_lapic_addr = address; - - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = read_apic_id(); - - pr_info("Boot CPU = %d\n", boot_cpu_physical_apicid); -} - /* All CPUs enumerated by SFI must be present and enabled */ static void __cpuinit mp_sfi_register_lapic(u8 id) { - if (MAX_APICS - id <= 0) { + if (MAX_LOCAL_APIC - id <= 0) { pr_warning("Processor #%d invalid (max %d)\n", - id, MAX_APICS); + id, MAX_LOCAL_APIC); return; } @@ -110,7 +99,7 @@ static int __init sfi_parse_ioapic(struct sfi_table_header *table) int __init sfi_platform_init(void) { #ifdef CONFIG_X86_LOCAL_APIC - mp_sfi_register_lapic_address(sfi_lapic_addr); + register_lapic_address(sfi_lapic_addr); sfi_table_parse(SFI_SIG_CPUS, NULL, NULL, sfi_parse_cpus); #endif #ifdef CONFIG_X86_IO_APIC diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index ba9caa808a9c..df58e9cad96a 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1341,7 +1341,7 @@ uv_activation_descriptor_init(int node, int pnode) /* * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR) - * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub + * per cpu; and one per cpu on the uvhub (UV_ADP_SIZE) */ bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE * UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node); @@ -1490,7 +1490,7 @@ calculate_destination_timeout(void) /* * initialize the bau_control structure for each cpu */ -static void __init uv_init_per_cpu(int nuvhubs) +static int __init uv_init_per_cpu(int nuvhubs) { int i; int cpu; @@ -1507,7 +1507,7 @@ static void __init uv_init_per_cpu(int nuvhubs) struct bau_control *smaster = NULL; struct socket_desc { short num_cpus; - short cpu_number[16]; + short cpu_number[MAX_CPUS_PER_SOCKET]; }; struct uvhub_desc { unsigned short socket_mask; @@ -1540,6 +1540,10 @@ static void __init uv_init_per_cpu(int nuvhubs) sdp = &bdp->socket[socket]; sdp->cpu_number[sdp->num_cpus] = cpu; sdp->num_cpus++; + if (sdp->num_cpus > MAX_CPUS_PER_SOCKET) { + printk(KERN_EMERG "%d cpus per socket invalid\n", sdp->num_cpus); + return 1; + } } for (uvhub = 0; uvhub < nuvhubs; uvhub++) { if (!(*(uvhub_mask + (uvhub/8)) & (1 << (uvhub%8)))) @@ -1570,6 +1574,12 @@ static void __init uv_init_per_cpu(int nuvhubs) bcp->uvhub_master = hmaster; bcp->uvhub_cpu = uv_cpu_hub_info(cpu)-> blade_processor_id; + if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) { + printk(KERN_EMERG + "%d cpus per uvhub invalid\n", + bcp->uvhub_cpu); + return 1; + } } nextsocket: socket++; @@ -1595,6 +1605,7 @@ nextsocket: bcp->congested_reps = congested_reps; bcp->congested_period = congested_period; } + return 0; } /* @@ -1625,7 +1636,10 @@ static int __init uv_bau_init(void) spin_lock_init(&disable_lock); congested_cycles = microsec_2_cycles(congested_response_us); - uv_init_per_cpu(nuvhubs); + if (uv_init_per_cpu(nuvhubs)) { + nobau = 1; + return 0; + } uv_partition_base_pnode = 0x7fffffff; for (uvhub = 0; uvhub < nuvhubs; uvhub++) diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c index 3371bd053b89..632037671746 100644 --- a/arch/x86/platform/visws/visws_quirks.c +++ b/arch/x86/platform/visws/visws_quirks.c @@ -171,7 +171,7 @@ static void __init MP_processor_info(struct mpc_cpu *m) ver = m->apicver; if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) { printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", - m->apicid, MAX_APICS); + m->apicid, MAX_LOCAL_APIC); return; } |
