diff options
Diffstat (limited to 'arch/x86/pci')
| -rw-r--r-- | arch/x86/pci/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/pci/sta2x11-fixup.c | 366 |
2 files changed, 368 insertions, 0 deletions
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index e76e18c94a3c..3af5a1e79c9c 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_X86_INTEL_CE) += ce4100.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o +obj-$(CONFIG_STA2X11) += sta2x11-fixup.o + obj-$(CONFIG_X86_VISWS) += visws.o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c new file mode 100644 index 000000000000..9d8a509c9730 --- /dev/null +++ b/arch/x86/pci/sta2x11-fixup.c @@ -0,0 +1,366 @@ +/* + * arch/x86/pci/sta2x11-fixup.c + * glue code for lib/swiotlb.c and DMA translation between STA2x11 + * AMBA memory mapping and the X86 memory mapping + * + * ST Microelectronics ConneXt (STA2X11/STA2X10) + * + * Copyright (c) 2010-2011 Wind River Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/export.h> +#include <linux/list.h> + +#define STA2X11_SWIOTLB_SIZE (4*1024*1024) +extern int swiotlb_late_init_with_default_size(size_t default_size); + +/* + * We build a list of bus numbers that are under the ConneXt. The + * main bridge hosts 4 busses, which are the 4 endpoints, in order. + */ +#define STA2X11_NR_EP 4 /* 0..3 included */ +#define STA2X11_NR_FUNCS 8 /* 0..7 included */ +#define STA2X11_AMBA_SIZE (512 << 20) + +struct sta2x11_ahb_regs { /* saved during suspend */ + u32 base, pexlbase, pexhbase, crw; +}; + +struct sta2x11_mapping { + u32 amba_base; + int is_suspended; + struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS]; +}; + +struct sta2x11_instance { + struct list_head list; + int bus0; + struct sta2x11_mapping map[STA2X11_NR_EP]; +}; + +static LIST_HEAD(sta2x11_instance_list); + +/* At probe time, record new instances of this bridge (likely one only) */ +static void sta2x11_new_instance(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + + instance = kzalloc(sizeof(*instance), GFP_ATOMIC); + if (!instance) + return; + /* This has a subordinate bridge, with 4 more-subordinate ones */ + instance->bus0 = pdev->subordinate->number + 1; + + if (list_empty(&sta2x11_instance_list)) { + int size = STA2X11_SWIOTLB_SIZE; + /* First instance: register your own swiotlb area */ + dev_info(&pdev->dev, "Using SWIOTLB (size %i)\n", size); + if (swiotlb_late_init_with_default_size(size)) + dev_emerg(&pdev->dev, "init swiotlb failed\n"); + } + list_add(&instance->list, &sta2x11_instance_list); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, 0xcc17, sta2x11_new_instance); + +/* + * Utility functions used in this file from below + */ +static struct sta2x11_instance *sta2x11_pdev_to_instance(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + int ep; + + list_for_each_entry(instance, &sta2x11_instance_list, list) { + ep = pdev->bus->number - instance->bus0; + if (ep >= 0 && ep < STA2X11_NR_EP) + return instance; + } + return NULL; +} + +static int sta2x11_pdev_to_ep(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + + instance = sta2x11_pdev_to_instance(pdev); + if (!instance) + return -1; + + return pdev->bus->number - instance->bus0; +} + +static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance; + int ep; + + instance = sta2x11_pdev_to_instance(pdev); + if (!instance) + return NULL; + ep = sta2x11_pdev_to_ep(pdev); + return instance->map + ep; +} + +/* This is exported, as some devices need to access the MFD registers */ +struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev) +{ + return sta2x11_pdev_to_instance(pdev); +} +EXPORT_SYMBOL(sta2x11_get_instance); + + +/** + * p2a - Translate physical address to STA2x11 AMBA address, + * used for DMA transfers to STA2x11 + * @p: Physical address + * @pdev: PCI device (must be hosted within the connext) + */ +static dma_addr_t p2a(dma_addr_t p, struct pci_dev *pdev) +{ + struct sta2x11_mapping *map; + dma_addr_t a; + + map = sta2x11_pdev_to_mapping(pdev); + a = p + map->amba_base; + return a; +} + +/** + * a2p - Translate STA2x11 AMBA address to physical address + * used for DMA transfers from STA2x11 + * @a: STA2x11 AMBA address + * @pdev: PCI device (must be hosted within the connext) + */ +static dma_addr_t a2p(dma_addr_t a, struct pci_dev *pdev) +{ + struct sta2x11_mapping *map; + dma_addr_t p; + + map = sta2x11_pdev_to_mapping(pdev); + p = a - map->amba_base; + return p; +} + +/** + * sta2x11_swiotlb_alloc_coherent - Allocate swiotlb bounce buffers + * returns virtual address. This is the only "special" function here. + * @dev: PCI device + * @size: Size of the buffer + * @dma_handle: DMA address + * @flags: memory flags + */ +static void *sta2x11_swiotlb_alloc_coherent(struct device *dev, + size_t size, + dma_addr_t *dma_handle, + gfp_t flags, + struct dma_attrs *attrs) +{ + void *vaddr; + + vaddr = dma_generic_alloc_coherent(dev, size, dma_handle, flags, attrs); + if (!vaddr) + vaddr = swiotlb_alloc_coherent(dev, size, dma_handle, flags); + *dma_handle = p2a(*dma_handle, to_pci_dev(dev)); + return vaddr; +} + +/* We have our own dma_ops: the same as swiotlb but from alloc (above) */ +static struct dma_map_ops sta2x11_dma_ops = { + .alloc = sta2x11_swiotlb_alloc_coherent, + .free = swiotlb_free_coherent, + .map_page = swiotlb_map_page, + .unmap_page = swiotlb_unmap_page, + .map_sg = swiotlb_map_sg_attrs, + .unmap_sg = swiotlb_unmap_sg_attrs, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .mapping_error = swiotlb_dma_mapping_error, + .dma_supported = NULL, /* FIXME: we should use this instead! */ +}; + +/* At setup time, we use our own ops if the device is a ConneXt one */ +static void sta2x11_setup_pdev(struct pci_dev *pdev) +{ + struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev); + + if (!instance) /* either a sta2x11 bridge or another ST device */ + return; + pci_set_consistent_dma_mask(pdev, STA2X11_AMBA_SIZE - 1); + pci_set_dma_mask(pdev, STA2X11_AMBA_SIZE - 1); + pdev->dev.archdata.dma_ops = &sta2x11_dma_ops; + + /* We must enable all devices as master, for audio DMA to work */ + pci_set_master(pdev); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev); + +/* + * The following three functions are exported (used in swiotlb: FIXME) + */ +/** + * dma_capable - Check if device can manage DMA transfers (FIXME: kill it) + * @dev: device for a PCI device + * @addr: DMA address + * @size: DMA size + */ +bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) +{ + struct sta2x11_mapping *map; + + if (dev->archdata.dma_ops != &sta2x11_dma_ops) { + if (!dev->dma_mask) + return false; + return addr + size - 1 <= *dev->dma_mask; + } + + map = sta2x11_pdev_to_mapping(to_pci_dev(dev)); + + if (!map || (addr < map->amba_base)) + return false; + if (addr + size >= map->amba_base + STA2X11_AMBA_SIZE) { + return false; + } + + return true; +} + +/** + * phys_to_dma - Return the DMA AMBA address used for this STA2x11 device + * @dev: device for a PCI device + * @paddr: Physical address + */ +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + if (dev->archdata.dma_ops != &sta2x11_dma_ops) + return paddr; + return p2a(paddr, to_pci_dev(dev)); +} + +/** + * dma_to_phys - Return the physical address used for this STA2x11 DMA address + * @dev: device for a PCI device + * @daddr: STA2x11 AMBA DMA address + */ +phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + if (dev->archdata.dma_ops != &sta2x11_dma_ops) + return daddr; + return a2p(daddr, to_pci_dev(dev)); +} + + +/* + * At boot we must set up the mappings for the pcie-to-amba bridge. + * It involves device access, and the same happens at suspend/resume time + */ + +#define AHB_MAPB 0xCA4 +#define AHB_CRW(i) (AHB_MAPB + 0 + (i) * 0x10) +#define AHB_CRW_SZMASK 0xfffffc00UL +#define AHB_CRW_ENABLE (1 << 0) +#define AHB_CRW_WTYPE_MEM (2 << 1) +#define AHB_CRW_ROE (1UL << 3) /* Relax Order Ena */ +#define AHB_CRW_NSE (1UL << 4) /* No Snoop Enable */ +#define AHB_BASE(i) (AHB_MAPB + 4 + (i) * 0x10) +#define AHB_PEXLBASE(i) (AHB_MAPB + 8 + (i) * 0x10) +#define AHB_PEXHBASE(i) (AHB_MAPB + 12 + (i) * 0x10) + +/* At probe time, enable mapping for each endpoint, using the pdev */ +static void sta2x11_map_ep(struct pci_dev *pdev) +{ + struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev); + int i; + + if (!map) + return; + pci_read_config_dword(pdev, AHB_BASE(0), &map->amba_base); + + /* Configure AHB mapping */ + pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0); + pci_write_config_dword(pdev, AHB_PEXHBASE(0), 0); + pci_write_config_dword(pdev, AHB_CRW(0), STA2X11_AMBA_SIZE | + AHB_CRW_WTYPE_MEM | AHB_CRW_ENABLE); + + /* Disable all the other windows */ + for (i = 1; i < STA2X11_NR_FUNCS; i++) + pci_write_config_dword(pdev, AHB_CRW(i), 0); + + dev_info(&pdev->dev, + "sta2x11: Map EP %i: AMBA address %#8x-%#8x\n", + sta2x11_pdev_to_ep(pdev), map->amba_base, + map->amba_base + STA2X11_AMBA_SIZE - 1); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep); + +#ifdef CONFIG_PM /* Some register values must be saved and restored */ + +static void suspend_mapping(struct pci_dev *pdev) +{ + struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev); + int i; + + if (!map) + return; + + if (map->is_suspended) + return; + map->is_suspended = 1; + + /* Save all window configs */ + for (i = 0; i < STA2X11_NR_FUNCS; i++) { + struct sta2x11_ahb_regs *regs = map->regs + i; + + pci_read_config_dword(pdev, AHB_BASE(i), ®s->base); + pci_read_config_dword(pdev, AHB_PEXLBASE(i), ®s->pexlbase); + pci_read_config_dword(pdev, AHB_PEXHBASE(i), ®s->pexhbase); + pci_read_config_dword(pdev, AHB_CRW(i), ®s->crw); + } +} +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, suspend_mapping); + +static void resume_mapping(struct pci_dev *pdev) +{ + struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev); + int i; + + if (!map) + return; + + + if (!map->is_suspended) + goto out; + map->is_suspended = 0; + + /* Restore all window configs */ + for (i = 0; i < STA2X11_NR_FUNCS; i++) { + struct sta2x11_ahb_regs *regs = map->regs + i; + + pci_write_config_dword(pdev, AHB_BASE(i), regs->base); + pci_write_config_dword(pdev, AHB_PEXLBASE(i), regs->pexlbase); + pci_write_config_dword(pdev, AHB_PEXHBASE(i), regs->pexhbase); + pci_write_config_dword(pdev, AHB_CRW(i), regs->crw); + } +out: + pci_set_master(pdev); /* Like at boot, enable master on all devices */ +} +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, resume_mapping); + +#endif /* CONFIG_PM */ |
