diff options
Diffstat (limited to 'arch/x86/oprofile/op_model_ppro.c')
| -rw-r--r-- | arch/x86/oprofile/op_model_ppro.c | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c new file mode 100644 index 000000000000..c554f52cb808 --- /dev/null +++ b/arch/x86/oprofile/op_model_ppro.c @@ -0,0 +1,192 @@ +/** + * @file op_model_ppro.h + * pentium pro / P6 model-specific MSR operations + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author John Levon + * @author Philippe Elie + * @author Graydon Hoare + */ + +#include <linux/oprofile.h> +#include <asm/ptrace.h> +#include <asm/msr.h> +#include <asm/apic.h> +#include <asm/nmi.h> + +#include "op_x86_model.h" +#include "op_counter.h" + +#define NUM_COUNTERS 2 +#define NUM_CONTROLS 2 + +#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0) +#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0) +#define CTR_32BIT_WRITE(l,msrs,c) \ + do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0);} while (0) +#define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) + +#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0) +#define CTRL_READ(l,h,msrs,c) do {rdmsr((msrs->controls[(c)].addr), (l), (h));} while (0) +#define CTRL_WRITE(l,h,msrs,c) do {wrmsr((msrs->controls[(c)].addr), (l), (h));} while (0) +#define CTRL_SET_ACTIVE(n) (n |= (1<<22)) +#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22)) +#define CTRL_CLEAR(x) (x &= (1<<21)) +#define CTRL_SET_ENABLE(val) (val |= 1<<20) +#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16)) +#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17)) +#define CTRL_SET_UM(val, m) (val |= (m << 8)) +#define CTRL_SET_EVENT(val, e) (val |= e) + +static unsigned long reset_value[NUM_COUNTERS]; + +static void ppro_fill_in_addresses(struct op_msrs * const msrs) +{ + int i; + + for (i=0; i < NUM_COUNTERS; i++) { + if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i)) + msrs->counters[i].addr = MSR_P6_PERFCTR0 + i; + else + msrs->counters[i].addr = 0; + } + + for (i=0; i < NUM_CONTROLS; i++) { + if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i)) + msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i; + else + msrs->controls[i].addr = 0; + } +} + + +static void ppro_setup_ctrs(struct op_msrs const * const msrs) +{ + unsigned int low, high; + int i; + + /* clear all counters */ + for (i = 0 ; i < NUM_CONTROLS; ++i) { + if (unlikely(!CTRL_IS_RESERVED(msrs,i))) + continue; + CTRL_READ(low, high, msrs, i); + CTRL_CLEAR(low); + CTRL_WRITE(low, high, msrs, i); + } + + /* avoid a false detection of ctr overflows in NMI handler */ + for (i = 0; i < NUM_COUNTERS; ++i) { + if (unlikely(!CTR_IS_RESERVED(msrs,i))) + continue; + CTR_32BIT_WRITE(1, msrs, i); + } + + /* enable active counters */ + for (i = 0; i < NUM_COUNTERS; ++i) { + if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) { + reset_value[i] = counter_config[i].count; + + CTR_32BIT_WRITE(counter_config[i].count, msrs, i); + + CTRL_READ(low, high, msrs, i); + CTRL_CLEAR(low); + CTRL_SET_ENABLE(low); + CTRL_SET_USR(low, counter_config[i].user); + CTRL_SET_KERN(low, counter_config[i].kernel); + CTRL_SET_UM(low, counter_config[i].unit_mask); + CTRL_SET_EVENT(low, counter_config[i].event); + CTRL_WRITE(low, high, msrs, i); + } else { + reset_value[i] = 0; + } + } +} + + +static int ppro_check_ctrs(struct pt_regs * const regs, + struct op_msrs const * const msrs) +{ + unsigned int low, high; + int i; + + for (i = 0 ; i < NUM_COUNTERS; ++i) { + if (!reset_value[i]) + continue; + CTR_READ(low, high, msrs, i); + if (CTR_OVERFLOWED(low)) { + oprofile_add_sample(regs, i); + CTR_32BIT_WRITE(reset_value[i], msrs, i); + } + } + + /* Only P6 based Pentium M need to re-unmask the apic vector but it + * doesn't hurt other P6 variant */ + apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED); + + /* We can't work out if we really handled an interrupt. We + * might have caught a *second* counter just after overflowing + * the interrupt for this counter then arrives + * and we don't find a counter that's overflowed, so we + * would return 0 and get dazed + confused. Instead we always + * assume we found an overflow. This sucks. + */ + return 1; +} + + +static void ppro_start(struct op_msrs const * const msrs) +{ + unsigned int low,high; + int i; + + for (i = 0; i < NUM_COUNTERS; ++i) { + if (reset_value[i]) { + CTRL_READ(low, high, msrs, i); + CTRL_SET_ACTIVE(low); + CTRL_WRITE(low, high, msrs, i); + } + } +} + + +static void ppro_stop(struct op_msrs const * const msrs) +{ + unsigned int low,high; + int i; + + for (i = 0; i < NUM_COUNTERS; ++i) { + if (!reset_value[i]) + continue; + CTRL_READ(low, high, msrs, i); + CTRL_SET_INACTIVE(low); + CTRL_WRITE(low, high, msrs, i); + } +} + +static void ppro_shutdown(struct op_msrs const * const msrs) +{ + int i; + + for (i = 0 ; i < NUM_COUNTERS ; ++i) { + if (CTR_IS_RESERVED(msrs,i)) + release_perfctr_nmi(MSR_P6_PERFCTR0 + i); + } + for (i = 0 ; i < NUM_CONTROLS ; ++i) { + if (CTRL_IS_RESERVED(msrs,i)) + release_evntsel_nmi(MSR_P6_EVNTSEL0 + i); + } +} + + +struct op_x86_model_spec const op_ppro_spec = { + .num_counters = NUM_COUNTERS, + .num_controls = NUM_CONTROLS, + .fill_in_addresses = &ppro_fill_in_addresses, + .setup_ctrs = &ppro_setup_ctrs, + .check_ctrs = &ppro_check_ctrs, + .start = &ppro_start, + .stop = &ppro_stop, + .shutdown = &ppro_shutdown +}; |
