diff options
Diffstat (limited to 'arch/x86/kernel')
34 files changed, 568 insertions, 3768 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 9bcd0b56ca17..01663ee5f1b7 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -22,7 +22,7 @@ KASAN_SANITIZE_dumpstack_$(BITS).o := n CFLAGS_irq.o := -I$(src)/../include/asm/trace -obj-y := process_$(BITS).o signal.o entry_$(BITS).o +obj-y := process_$(BITS).o signal.o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time.o ioport.o ldt.o dumpstack.o nmi.o obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o @@ -31,9 +31,6 @@ obj-y += probe_roms.o obj-$(CONFIG_X86_32) += i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += mcount_64.o -obj-y += syscall_$(BITS).o vsyscall_gtod.o -obj-$(CONFIG_IA32_EMULATION) += syscall_32.o -obj-$(CONFIG_X86_VSYSCALL_EMULATION) += vsyscall_64.o vsyscall_emu_64.o obj-$(CONFIG_X86_ESPFIX64) += espfix_64.o obj-$(CONFIG_SYSFS) += ksysfs.o obj-y += bootflag.o e820.o diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index dcaab87da629..d8f42f902a0f 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -66,7 +66,7 @@ int main(void) DEFINE(__NR_syscall_max, sizeof(syscalls_64) - 1); DEFINE(NR_syscalls, sizeof(syscalls_64)); - DEFINE(__NR_ia32_syscall_max, sizeof(syscalls_ia32) - 1); + DEFINE(__NR_syscall_compat_max, sizeof(syscalls_ia32) - 1); DEFINE(IA32_NR_syscalls, sizeof(syscalls_ia32)); return 0; diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index e4cf63301ff4..eb4f01269b5d 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -288,7 +288,7 @@ static int nearby_node(int apicid) * Assumption: Number of cores in each internal node is the same. * (2) AMD processors supporting compute units */ -#ifdef CONFIG_X86_HT +#ifdef CONFIG_SMP static void amd_get_topology(struct cpuinfo_x86 *c) { u32 nodes, cores_per_cu = 1; @@ -341,7 +341,7 @@ static void amd_get_topology(struct cpuinfo_x86 *c) */ static void amd_detect_cmp(struct cpuinfo_x86 *c) { -#ifdef CONFIG_X86_HT +#ifdef CONFIG_SMP unsigned bits; int cpu = smp_processor_id(); @@ -420,7 +420,7 @@ static void srat_detect_node(struct cpuinfo_x86 *c) static void early_init_amd_mc(struct cpuinfo_x86 *c) { -#ifdef CONFIG_X86_HT +#ifdef CONFIG_SMP unsigned bits, ecx; /* Multi core CPU? */ diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 6bec0b55863e..cc7f753e571d 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -508,7 +508,7 @@ static void cpu_detect_tlb(struct cpuinfo_x86 *c) void detect_ht(struct cpuinfo_x86 *c) { -#ifdef CONFIG_X86_HT +#ifdef CONFIG_SMP u32 eax, ebx, ecx, edx; int index_msb, core_bits; static bool printed; @@ -844,7 +844,7 @@ static void generic_identify(struct cpuinfo_x86 *c) if (c->cpuid_level >= 0x00000001) { c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF; #ifdef CONFIG_X86_32 -# ifdef CONFIG_X86_HT +# ifdef CONFIG_SMP c->apicid = apic->phys_pkg_id(c->initial_apicid, 0); # else c->apicid = c->initial_apicid; @@ -1026,7 +1026,7 @@ void enable_sep_cpu(void) (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack), 0); - wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)ia32_sysenter_target, 0); + wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0); out: put_cpu(); @@ -1204,10 +1204,10 @@ void syscall_init(void) * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip. */ wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); - wrmsrl(MSR_LSTAR, system_call); + wrmsrl(MSR_LSTAR, entry_SYSCALL_64); #ifdef CONFIG_IA32_EMULATION - wrmsrl(MSR_CSTAR, ia32_cstar_target); + wrmsrl(MSR_CSTAR, entry_SYSCALL_compat); /* * This only works on Intel CPUs. * On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP. @@ -1216,7 +1216,7 @@ void syscall_init(void) */ wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS); wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL); - wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target); + wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat); #else wrmsrl(MSR_CSTAR, ignore_sysret); wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG); diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index edcb0e28c336..be4febc58b94 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -654,7 +654,7 @@ unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c) unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */ unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */ unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb; -#ifdef CONFIG_X86_HT +#ifdef CONFIG_SMP unsigned int cpu = c->cpu_index; #endif @@ -773,19 +773,19 @@ unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c) if (new_l2) { l2 = new_l2; -#ifdef CONFIG_X86_HT +#ifdef CONFIG_SMP per_cpu(cpu_llc_id, cpu) = l2_id; #endif } if (new_l3) { l3 = new_l3; -#ifdef CONFIG_X86_HT +#ifdef CONFIG_SMP per_cpu(cpu_llc_id, cpu) = l3_id; #endif } -#ifdef CONFIG_X86_HT +#ifdef CONFIG_SMP /* * If cpu_llc_id is not yet set, this means cpuid_level < 4 which in * turns means that the only possibility is SMT (as indicated in diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index e535533d5ab8..5b974c97e31e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -708,6 +708,7 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, struct pt_regs *regs) { int i, ret = 0; + char *tmp; for (i = 0; i < mca_cfg.banks; i++) { m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i)); @@ -716,9 +717,11 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, if (quirk_no_way_out) quirk_no_way_out(i, m, regs); } - if (mce_severity(m, mca_cfg.tolerant, msg, true) >= - MCE_PANIC_SEVERITY) + + if (mce_severity(m, mca_cfg.tolerant, &tmp, true) >= MCE_PANIC_SEVERITY) { + *msg = tmp; ret = 1; + } } return ret; } @@ -1047,6 +1050,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) char *msg = "Unknown"; u64 recover_paddr = ~0ull; int flags = MF_ACTION_REQUIRED; + int lmce = 0; prev_state = ist_enter(regs); @@ -1074,11 +1078,20 @@ void do_machine_check(struct pt_regs *regs, long error_code) kill_it = 1; /* - * Go through all the banks in exclusion of the other CPUs. - * This way we don't report duplicated events on shared banks - * because the first one to see it will clear it. + * Check if this MCE is signaled to only this logical processor */ - order = mce_start(&no_way_out); + if (m.mcgstatus & MCG_STATUS_LMCES) + lmce = 1; + else { + /* + * Go through all the banks in exclusion of the other CPUs. + * This way we don't report duplicated events on shared banks + * because the first one to see it will clear it. + * If this is a Local MCE, then no need to perform rendezvous. + */ + order = mce_start(&no_way_out); + } + for (i = 0; i < cfg->banks; i++) { __clear_bit(i, toclear); if (!test_bit(i, valid_banks)) @@ -1155,8 +1168,18 @@ void do_machine_check(struct pt_regs *regs, long error_code) * Do most of the synchronization with other CPUs. * When there's any problem use only local no_way_out state. */ - if (mce_end(order) < 0) - no_way_out = worst >= MCE_PANIC_SEVERITY; + if (!lmce) { + if (mce_end(order) < 0) + no_way_out = worst >= MCE_PANIC_SEVERITY; + } else { + /* + * Local MCE skipped calling mce_reign() + * If we found a fatal error, we need to panic here. + */ + if (worst >= MCE_PANIC_SEVERITY && mca_cfg.tolerant < 3) + mce_panic("Machine check from unknown source", + NULL, NULL); + } /* * At insane "tolerant" levels we take no action. Otherwise @@ -1637,10 +1660,16 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c) mce_intel_feature_init(c); mce_adjust_timer = cmci_intel_adjust_timer; break; - case X86_VENDOR_AMD: + + case X86_VENDOR_AMD: { + u32 ebx = cpuid_ebx(0x80000007); + mce_amd_feature_init(c); - mce_flags.overflow_recov = cpuid_ebx(0x80000007) & 0x1; + mce_flags.overflow_recov = !!(ebx & BIT(0)); + mce_flags.succor = !!(ebx & BIT(1)); break; + } + default: break; } @@ -1976,6 +2005,7 @@ void mce_disable_bank(int bank) /* * mce=off Disables machine check * mce=no_cmci Disables CMCI + * mce=no_lmce Disables LMCE * mce=dont_log_ce Clears corrected events silently, no log created for CEs. * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared. * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above) @@ -1999,6 +2029,8 @@ static int __init mcheck_enable(char *str) cfg->disabled = true; else if (!strcmp(str, "no_cmci")) cfg->cmci_disabled = true; + else if (!strcmp(str, "no_lmce")) + cfg->lmce_disabled = true; else if (!strcmp(str, "dont_log_ce")) cfg->dont_log_ce = true; else if (!strcmp(str, "ignore_ce")) @@ -2008,11 +2040,8 @@ static int __init mcheck_enable(char *str) else if (!strcmp(str, "bios_cmci_threshold")) cfg->bios_cmci_threshold = true; else if (isdigit(str[0])) { - get_option(&str, &(cfg->tolerant)); - if (*str == ',') { - ++str; + if (get_option(&str, &cfg->tolerant) == 2) get_option(&str, &(cfg->monarch_timeout)); - } } else { pr_info("mce argument %s ignored. Please use /sys\n", str); return 0; diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 55ad9b37cae8..e99b15077e94 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -1,19 +1,13 @@ /* - * (c) 2005-2012 Advanced Micro Devices, Inc. + * (c) 2005-2015 Advanced Micro Devices, Inc. * Your use of this code is subject to the terms and conditions of the * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html * * Written by Jacob Shin - AMD, Inc. - * * Maintained by: Borislav Petkov <bp@alien8.de> * - * April 2006 - * - added support for AMD Family 0x10 processors - * May 2012 - * - major scrubbing - * - * All MC4_MISCi registers are shared between multi-cores + * All MC4_MISCi registers are shared between cores on a node. */ #include <linux/interrupt.h> #include <linux/notifier.h> @@ -32,6 +26,7 @@ #include <asm/idle.h> #include <asm/mce.h> #include <asm/msr.h> +#include <asm/trace/irq_vectors.h> #define NR_BLOCKS 9 #define THRESHOLD_MAX 0xFFF @@ -47,6 +42,13 @@ #define MASK_BLKPTR_LO 0xFF000000 #define MCG_XBLK_ADDR 0xC0000400 +/* Deferred error settings */ +#define MSR_CU_DEF_ERR 0xC0000410 +#define MASK_DEF_LVTOFF 0x000000F0 +#define MASK_DEF_INT_TYPE 0x00000006 +#define DEF_LVT_OFF 0x2 +#define DEF_INT_TYPE_APIC 0x2 + static const char * const th_names[] = { "load_store", "insn_fetch", @@ -60,6 +62,13 @@ static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks); static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */ static void amd_threshold_interrupt(void); +static void amd_deferred_error_interrupt(void); + +static void default_deferred_error_interrupt(void) +{ + pr_err("Unexpected deferred interrupt at vector %x\n", DEFERRED_ERROR_VECTOR); +} +void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt; /* * CPU Initialization @@ -196,7 +205,7 @@ static void mce_threshold_block_init(struct threshold_block *b, int offset) threshold_restart_bank(&tr); }; -static int setup_APIC_mce(int reserved, int new) +static int setup_APIC_mce_threshold(int reserved, int new) { if (reserved < 0 && !setup_APIC_eilvt(new, THRESHOLD_APIC_VECTOR, APIC_EILVT_MSG_FIX, 0)) @@ -205,6 +214,39 @@ static int setup_APIC_mce(int reserved, int new) return reserved; } +static int setup_APIC_deferred_error(int reserved, int new) +{ + if (reserved < 0 && !setup_APIC_eilvt(new, DEFERRED_ERROR_VECTOR, + APIC_EILVT_MSG_FIX, 0)) + return new; + + return reserved; +} + +static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c) +{ + u32 low = 0, high = 0; + int def_offset = -1, def_new; + + if (rdmsr_safe(MSR_CU_DEF_ERR, &low, &high)) + return; + + def_new = (low & MASK_DEF_LVTOFF) >> 4; + if (!(low & MASK_DEF_LVTOFF)) { + pr_err(FW_BUG "Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.\n"); + def_new = DEF_LVT_OFF; + low = (low & ~MASK_DEF_LVTOFF) | (DEF_LVT_OFF << 4); + } + + def_offset = setup_APIC_deferred_error(def_offset, def_new); + if ((def_offset == def_new) && + (deferred_error_int_vector != amd_deferred_error_interrupt)) + deferred_error_int_vector = amd_deferred_error_interrupt; + + low = (low & ~MASK_DEF_INT_TYPE) | DEF_INT_TYPE_APIC; + wrmsr(MSR_CU_DEF_ERR, low, high); +} + /* cpu init entry point, called from mce.c with preempt off */ void mce_amd_feature_init(struct cpuinfo_x86 *c) { @@ -252,7 +294,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c) b.interrupt_enable = 1; new = (high & MASK_LVTOFF_HI) >> 20; - offset = setup_APIC_mce(offset, new); + offset = setup_APIC_mce_threshold(offset, new); if ((offset == new) && (mce_threshold_vector != amd_threshold_interrupt)) @@ -262,6 +304,73 @@ init: mce_threshold_block_init(&b, offset); } } + + if (mce_flags.succor) + deferred_error_interrupt_enable(c); +} + +static void __log_error(unsigned int bank, bool threshold_err, u64 misc) +{ + struct mce m; + u64 status; + + rdmsrl(MSR_IA32_MCx_STATUS(bank), status); + if (!(status & MCI_STATUS_VAL)) + return; + + mce_setup(&m); + + m.status = status; + m.bank = bank; + + if (threshold_err) + m.misc = misc; + + if (m.status & MCI_STATUS_ADDRV) + rdmsrl(MSR_IA32_MCx_ADDR(bank), m.addr); + + mce_log(&m); + wrmsrl(MSR_IA32_MCx_STATUS(bank), 0); +} + +static inline void __smp_deferred_error_interrupt(void) +{ + inc_irq_stat(irq_deferred_error_count); + deferred_error_int_vector(); +} + +asmlinkage __visible void smp_deferred_error_interrupt(void) +{ + entering_irq(); + __smp_deferred_error_interrupt(); + exiting_ack_irq(); +} + +asmlinkage __visible void smp_trace_deferred_error_interrupt(void) +{ + entering_irq(); + trace_deferred_error_apic_entry(DEFERRED_ERROR_VECTOR); + __smp_deferred_error_interrupt(); + trace_deferred_error_apic_exit(DEFERRED_ERROR_VECTOR); + exiting_ack_irq(); +} + +/* APIC interrupt handler for deferred errors */ +static void amd_deferred_error_interrupt(void) +{ + u64 status; + unsigned int bank; + + for (bank = 0; bank < mca_cfg.banks; ++bank) { + rdmsrl(MSR_IA32_MCx_STATUS(bank), status); + + if (!(status & MCI_STATUS_VAL) || + !(status & MCI_STATUS_DEFERRED)) + continue; + + __log_error(bank, false, 0); + break; + } } /* @@ -273,12 +382,12 @@ init: * the interrupt goes off when error_count reaches threshold_limit. * the handler will simply log mcelog w/ software defined bank number. */ + static void amd_threshold_interrupt(void) { u32 low = 0, high = 0, address = 0; int cpu = smp_processor_id(); unsigned int bank, block; - struct mce m; /* assume first bank caused it */ for (bank = 0; bank < mca_cfg.banks; ++bank) { @@ -321,15 +430,7 @@ static void amd_threshold_interrupt(void) return; log: - mce_setup(&m); - rdmsrl(MSR_IA32_MCx_STATUS(bank), m.status); - if (!(m.status & MCI_STATUS_VAL)) - return; - m.misc = ((u64)high << 32) | low; - m.bank = bank; - mce_log(&m); - - wrmsrl(MSR_IA32_MCx_STATUS(bank), 0); + __log_error(bank, true, ((u64)high << 32) | low); } /* diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index b4a41cf030ed..844f56c5616d 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -91,6 +91,36 @@ static int cmci_supported(int *banks) return !!(cap & MCG_CMCI_P); } +static bool lmce_supported(void) +{ + u64 tmp; + + if (mca_cfg.lmce_disabled) + return false; + + rdmsrl(MSR_IA32_MCG_CAP, tmp); + + /* + * LMCE depends on recovery support in the processor. Hence both + * MCG_SER_P and MCG_LMCE_P should be present in MCG_CAP. + */ + if ((tmp & (MCG_SER_P | MCG_LMCE_P)) != + (MCG_SER_P | MCG_LMCE_P)) + return false; + + /* + * BIOS should indicate support for LMCE by setting bit 20 in + * IA32_FEATURE_CONTROL without which touching MCG_EXT_CTL will + * generate a #GP fault. + */ + rdmsrl(MSR_IA32_FEATURE_CONTROL, tmp); + if ((tmp & (FEATURE_CONTROL_LOCKED | FEATURE_CONTROL_LMCE)) == + (FEATURE_CONTROL_LOCKED | FEATURE_CONTROL_LMCE)) + return true; + + return false; +} + bool mce_intel_cmci_poll(void) { if (__this_cpu_read(cmci_storm_state) == CMCI_STORM_NONE) @@ -405,8 +435,22 @@ static void intel_init_cmci(void) cmci_recheck(); } +void intel_init_lmce(void) +{ + u64 val; + + if (!lmce_supported()) + return; + + rdmsrl(MSR_IA32_MCG_EXT_CTL, val); + + if (!(val & MCG_EXT_CTL_LMCE_EN)) + wrmsrl(MSR_IA32_MCG_EXT_CTL, val | MCG_EXT_CTL_LMCE_EN); +} + void mce_intel_feature_init(struct cpuinfo_x86 *c) { intel_init_thermal(c); intel_init_cmci(); + intel_init_lmce(); } diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c index 5f90b85ff22e..70d7c93f4550 100644 --- a/arch/x86/kernel/cpu/mtrr/cleanup.c +++ b/arch/x86/kernel/cpu/mtrr/cleanup.c @@ -98,7 +98,8 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range, continue; base = range_state[i].base_pfn; if (base < (1<<(20-PAGE_SHIFT)) && mtrr_state.have_fixed && - (mtrr_state.enabled & 1)) { + (mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED) && + (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) { /* Var MTRR contains UC entry below 1M? Skip it: */ printk(BIOS_BUG_MSG, i); if (base + size <= (1<<(20-PAGE_SHIFT))) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 7d74f7b3c6ba..3b533cf37c74 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -102,59 +102,76 @@ static int check_type_overlap(u8 *prev, u8 *curr) return 0; } -/* - * Error/Semi-error returns: - * 0xFF - when MTRR is not enabled - * *repeat == 1 implies [start:end] spanned across MTRR range and type returned - * corresponds only to [start:*partial_end]. - * Caller has to lookup again for [*partial_end:end]. +/** + * mtrr_type_lookup_fixed - look up memory type in MTRR fixed entries + * + * Return the MTRR fixed memory type of 'start'. + * + * MTRR fixed entries are divided into the following ways: + * 0x00000 - 0x7FFFF : This range is divided into eight 64KB sub-ranges + * 0x80000 - 0xBFFFF : This range is divided into sixteen 16KB sub-ranges + * 0xC0000 - 0xFFFFF : This range is divided into sixty-four 4KB sub-ranges + * + * Return Values: + * MTRR_TYPE_(type) - Matched memory type + * MTRR_TYPE_INVALID - Unmatched + */ +static u8 mtrr_type_lookup_fixed(u64 start, u64 end) +{ + int idx; + + if (start >= 0x100000) + return MTRR_TYPE_INVALID; + + /* 0x0 - 0x7FFFF */ + if (start < 0x80000) { + idx = 0; + idx += (start >> 16); + return mtrr_state.fixed_ranges[idx]; + /* 0x80000 - 0xBFFFF */ + } else if (start < 0xC0000) { + idx = 1 * 8; + idx += ((start - 0x80000) >> 14); + return mtrr_state.fixed_ranges[idx]; + } + + /* 0xC0000 - 0xFFFFF */ + idx = 3 * 8; + idx += ((start - 0xC0000) >> 12); + return mtrr_state.fixed_ranges[idx]; +} + +/** + * mtrr_type_lookup_variable - look up memory type in MTRR variable entries + * + * Return Value: + * MTRR_TYPE_(type) - Matched memory type or default memory type (unmatched) + * + * Output Arguments: + * repeat - Set to 1 when [start:end] spanned across MTRR range and type + * returned corresponds only to [start:*partial_end]. Caller has + * to lookup again for [*partial_end:end]. + * + * uniform - Set to 1 when an MTRR covers the region uniformly, i.e. the + * region is fully covered by a single MTRR entry or the default + * type. */ -static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat) +static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end, + int *repeat, u8 *uniform) { int i; u64 base, mask; u8 prev_match, curr_match; *repeat = 0; - if (!mtrr_state_set) - return 0xFF; - - if (!mtrr_state.enabled) - return 0xFF; + *uniform = 1; - /* Make end inclusive end, instead of exclusive */ + /* Make end inclusive instead of exclusive */ end--; - /* Look in fixed ranges. Just return the type as per start */ - if (mtrr_state.have_fixed && (start < 0x100000)) { - int idx; - - if (start < 0x80000) { - idx = 0; - idx += (start >> 16); - return mtrr_state.fixed_ranges[idx]; - } else if (start < 0xC0000) { - idx = 1 * 8; - idx += ((start - 0x80000) >> 14); - return mtrr_state.fixed_ranges[idx]; - } else if (start < 0x1000000) { - idx = 3 * 8; - idx += ((start - 0xC0000) >> 12); - return mtrr_state.fixed_ranges[idx]; - } - } - - /* - * Look in variable ranges - * Look of multiple ranges matching this address and pick type - * as per MTRR precedence - */ - if (!(mtrr_state.enabled & 2)) - return mtrr_state.def_type; - - prev_match = 0xFF; + prev_match = MTRR_TYPE_INVALID; for (i = 0; i < num_var_ranges; ++i) { - unsigned short start_state, end_state; + unsigned short start_state, end_state, inclusive; if (!(mtrr_state.var_ranges[i].mask_lo & (1 << 11))) continue; @@ -166,20 +183,29 @@ static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat) start_state = ((start & mask) == (base & mask)); end_state = ((end & mask) == (base & mask)); + inclusive = ((start < base) && (end > base)); - if (start_state != end_state) { + if ((start_state != end_state) || inclusive) { /* * We have start:end spanning across an MTRR. - * We split the region into - * either - * (start:mtrr_end) (mtrr_end:end) - * or - * (start:mtrr_start) (mtrr_start:end) + * We split the region into either + * + * - start_state:1 + * (start:mtrr_end)(mtrr_end:end) + * - end_state:1 + * (start:mtrr_start)(mtrr_start:end) + * - inclusive:1 + * (start:mtrr_start)(mtrr_start:mtrr_end)(mtrr_end:end) + * * depending on kind of overlap. - * Return the type for first region and a pointer to - * the start of second region so that caller will - * lookup again on the second region. - * Note: This way we handle multiple overlaps as well. + * + * Return the type of the first region and a pointer + * to the start of next region so that caller will be + * advised to lookup again after having adjusted start + * and end. + * + * Note: This way we handle overlaps with multiple + * entries and the default type properly. */ if (start_state) *partial_end = base + get_mtrr_size(mask); @@ -193,59 +219,94 @@ static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat) end = *partial_end - 1; /* end is inclusive */ *repeat = 1; + *uniform = 0; } if ((start & mask) != (base & mask)) continue; curr_match = mtrr_state.var_ranges[i].base_lo & 0xff; - if (prev_match == 0xFF) { + if (prev_match == MTRR_TYPE_INVALID) { prev_match = curr_match; continue; } + *uniform = 0; if (check_type_overlap(&prev_match, &curr_match)) return curr_match; } - if (mtrr_tom2) { - if (start >= (1ULL<<32) && (end < mtrr_tom2)) - return MTRR_TYPE_WRBACK; - } - - if (prev_match != 0xFF) + if (prev_match != MTRR_TYPE_INVALID) return prev_match; return mtrr_state.def_type; } -/* - * Returns the effective MTRR type for the region - * Error return: - * 0xFF - when MTRR is not enabled +/** + * mtrr_type_lookup - look up memory type in MTRR + * + * Return Values: + * MTRR_TYPE_(type) - The effective MTRR type for the region + * MTRR_TYPE_INVALID - MTRR is disabled + * + * Output Argument: + * uniform - Set to 1 when an MTRR covers the region uniformly, i.e. the + * region is fully covered by a single MTRR entry or the default + * type. */ -u8 mtrr_type_lookup(u64 start, u64 end) +u8 mtrr_type_lookup(u64 start, u64 end, u8 *uniform) { - u8 type, prev_type; + u8 type, prev_type, is_uniform = 1, dummy; int repeat; u64 partial_end; - type = __mtrr_type_lookup(start, end, &partial_end, &repeat); + if (!mtrr_state_set) + return MTRR_TYPE_INVALID; + + if (!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED)) + return MTRR_TYPE_INVALID; + + /* + * Look up the fixed ranges first, which take priority over + * the variable ranges. + */ + if ((start < 0x100000) && + (mtrr_state.have_fixed) && + (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) { + is_uniform = 0; + type = mtrr_type_lookup_fixed(start, end); + goto out; + } + + /* + * Look up the variable ranges. Look of multiple ranges matching + * this address and pick type as per MTRR precedence. + */ + type = mtrr_type_lookup_variable(start, end, &partial_end, + &repeat, &is_uniform); /* * Common path is with repeat = 0. * However, we can have cases where [start:end] spans across some - * MTRR range. Do repeated lookups for that case here. + * MTRR ranges and/or the default type. Do repeated lookups for + * that case here. */ while (repeat) { prev_type = type; start = partial_end; - type = __mtrr_type_lookup(start, end, &partial_end, &repeat); + is_uniform = 0; + type = mtrr_type_lookup_variable(start, end, &partial_end, + &repeat, &dummy); if (check_type_overlap(&prev_type, &type)) - return type; + goto out; } + if (mtrr_tom2 && (start >= (1ULL<<32)) && (end < mtrr_tom2)) + type = MTRR_TYPE_WRBACK; + +out: + *uniform = is_uniform; return type; } @@ -347,7 +408,9 @@ static void __init print_mtrr_state(void) mtrr_attrib_to_str(mtrr_state.def_type)); if (mtrr_state.have_fixed) { pr_debug("MTRR fixed ranges %sabled:\n", - mtrr_state.enabled & 1 ? "en" : "dis"); + ((mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED) && + (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) ? + "en" : "dis"); print_fixed(0x00000, 0x10000, mtrr_state.fixed_ranges + 0); for (i = 0; i < 2; ++i) print_fixed(0x80000 + i * 0x20000, 0x04000, @@ -360,7 +423,7 @@ static void __init print_mtrr_state(void) print_fixed_last(); } pr_debug("MTRR variable ranges %sabled:\n", - mtrr_state.enabled & 2 ? "en" : "dis"); + mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED ? "en" : "dis"); high_width = (__ffs64(size_or_mask) - (32 - PAGE_SHIFT) + 3) / 4; for (i = 0; i < num_var_ranges; ++i) { @@ -382,7 +445,7 @@ static void __init print_mtrr_state(void) } /* Grab all of the MTRR state for this CPU into *state */ -void __init get_mtrr_state(void) +bool __init get_mtrr_state(void) { struct mtrr_var_range *vrs; unsigned long flags; @@ -426,6 +489,8 @@ void __init get_mtrr_state(void) post_set(); local_irq_restore(flags); + + return !!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED); } /* Some BIOS's are messed up and don't set all MTRRs the same! */ diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index ea5f363a1948..e7ed0d8ebacb 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -59,6 +59,12 @@ #define MTRR_TO_PHYS_WC_OFFSET 1000 u32 num_var_ranges; +static bool __mtrr_enabled; + +static bool mtrr_enabled(void) +{ + return __mtrr_enabled; +} unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES]; static DEFINE_MUTEX(mtrr_mutex); @@ -286,7 +292,7 @@ int mtrr_add_page(unsigned long base, unsigned long size, int i, replace, error; mtrr_type ltype; - if (!mtrr_if) + if (!mtrr_enabled()) return -ENXIO; error = mtrr_if->validate_add_page(base, size, type); @@ -435,6 +441,8 @@ static int mtrr_check(unsigned long base, unsigned long size) int mtrr_add(unsigned long base, unsigned long size, unsigned int type, bool increment) { + if (!mtrr_enabled()) + return -ENODEV; if (mtrr_check(base, size)) return -EINVAL; return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type, @@ -463,8 +471,8 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) unsigned long lbase, lsize; int error = -EINVAL; - if (!mtrr_if) - return -ENXIO; + if (!mtrr_enabled()) + return -ENODEV; max = num_var_ranges; /* No CPU hotplug when we change MTRR entries */ @@ -523,6 +531,8 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) */ int mtrr_del(int reg, unsigned long base, unsigned long size) { + if (!mtrr_enabled()) + return -ENODEV; if (mtrr_check(base, size)) return -EINVAL; return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT); @@ -538,6 +548,9 @@ EXPORT_SYMBOL(mtrr_del); * attempts to add a WC MTRR covering size bytes starting at base and * logs an error if this fails. * + * The called should provide a power of two size on an equivalent + * power of two boundary. + * * Drivers must store the return value to pass to mtrr_del_wc_if_needed, * but drivers should not try to interpret that return value. */ @@ -545,7 +558,7 @@ int arch_phys_wc_add(unsigned long base, unsigned long size) { int ret; - if (pat_enabled) + if (pat_enabled() || !mtrr_enabled()) return 0; /* Success! (We don't need to do anything.) */ ret = mtrr_add(base, size, MTRR_TYPE_WRCOMB, true); @@ -577,7 +590,7 @@ void arch_phys_wc_del(int handle) EXPORT_SYMBOL(arch_phys_wc_del); /* - * phys_wc_to_mtrr_index - translates arch_phys_wc_add's return value + * arch_phys_wc_index - translates arch_phys_wc_add's return value * @handle: Return value from arch_phys_wc_add * * This will turn the return value from arch_phys_wc_add into an mtrr @@ -587,14 +600,14 @@ EXPORT_SYMBOL(arch_phys_wc_del); * in printk line. Alas there is an illegitimate use in some ancient * drm ioctls. */ -int phys_wc_to_mtrr_index(int handle) +int arch_phys_wc_index(int handle) { if (handle < MTRR_TO_PHYS_WC_OFFSET) return -1; else return handle - MTRR_TO_PHYS_WC_OFFSET; } -EXPORT_SYMBOL_GPL(phys_wc_to_mtrr_index); +EXPORT_SYMBOL_GPL(arch_phys_wc_index); /* * HACK ALERT! @@ -734,10 +747,12 @@ void __init mtrr_bp_init(void) } if (mtrr_if) { + __mtrr_enabled = true; set_num_var_ranges(); init_table(); if (use_intel()) { - get_mtrr_state(); + /* BIOS may override */ + __mtrr_enabled = get_mtrr_state(); if (mtrr_cleanup(phys_addr)) { changed_by_mtrr_cleanup = 1; @@ -745,10 +760,16 @@ void __init mtrr_bp_init(void) } } } + + if (!mtrr_enabled()) + pr_info("MTRR: Disabled\n"); } void mtrr_ap_init(void) { + if (!mtrr_enabled()) + return; + if (!use_intel() || mtrr_aps_delayed_init) return; /* @@ -774,6 +795,9 @@ void mtrr_save_state(void) { int first_cpu; + if (!mtrr_enabled()) + return; + get_online_cpus(); first_cpu = cpumask_first(cpu_online_mask); smp_call_function_single(first_cpu, mtrr_save_fixed_ranges, NULL, 1); @@ -782,6 +806,8 @@ void mtrr_save_state(void) void set_mtrr_aps_delayed_init(void) { + if (!mtrr_enabled()) + return; if (!use_intel()) return; @@ -793,7 +819,7 @@ void set_mtrr_aps_delayed_init(void) */ void mtrr_aps_init(void) { - if (!use_intel()) + if (!use_intel() || !mtrr_enabled()) return; /* @@ -810,7 +836,7 @@ void mtrr_aps_init(void) void mtrr_bp_restore(void) { - if (!use_intel()) + if (!use_intel() || !mtrr_enabled()) return; mtrr_if->set_all(); @@ -818,7 +844,7 @@ void mtrr_bp_restore(void) static int __init mtrr_init_finialize(void) { - if (!mtrr_if) + if (!mtrr_enabled()) return 0; if (use_intel()) { diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h index df5e41f31a27..951884dcc433 100644 --- a/arch/x86/kernel/cpu/mtrr/mtrr.h +++ b/arch/x86/kernel/cpu/mtrr/mtrr.h @@ -51,7 +51,7 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt); void fill_mtrr_var_range(unsigned int index, u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi); -void get_mtrr_state(void); +bool get_mtrr_state(void); extern void set_mtrr_ops(const struct mtrr_ops *ops); diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c index c76d3e37c6e1..e068d6683dba 100644 --- a/arch/x86/kernel/crash.c +++ b/arch/x86/kernel/crash.c @@ -22,6 +22,7 @@ #include <linux/elfcore.h> #include <linux/module.h> #include <linux/slab.h> +#include <linux/vmalloc.h> #include <asm/processor.h> #include <asm/hardirq.h> diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index fe9f0b79a18b..5cb9a4d6f623 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -627,8 +627,12 @@ static struct chipset early_qrk[] __initdata = { { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID, QFLAG_APPLY_ONCE, intel_graphics_stolen }, /* - * HPET on current version of Baytrail platform has accuracy - * problems, disable it for now: + * HPET on the current version of the Baytrail platform has accuracy + * problems: it will halt in deep idle state - so we disable it. + * + * More details can be found in section 18.10.1.3 of the datasheet: + * + * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z8000-datasheet-vol-1.pdf */ { PCI_VENDOR_ID_INTEL, 0x0f00, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S deleted file mode 100644 index 1c309763e321..000000000000 --- a/arch/x86/kernel/entry_32.S +++ /dev/null @@ -1,1401 +0,0 @@ -/* - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -/* - * entry.S contains the system-call and fault low-level handling routines. - * This also contains the timer-interrupt handler, as well as all interrupts - * and faults that can result in a task-switch. - * - * NOTE: This code handles signal-recognition, which happens every time - * after a timer-interrupt and after each system call. - * - * I changed all the .align's to 4 (16 byte alignment), as that's faster - * on a 486. - * - * Stack layout in 'syscall_exit': - * ptrace needs to have all regs on the stack. - * if the order here is changed, it needs to be - * updated in fork.c:copy_process, signal.c:do_signal, - * ptrace.c and ptrace.h - * - * 0(%esp) - %ebx - * 4(%esp) - %ecx - * 8(%esp) - %edx - * C(%esp) - %esi - * 10(%esp) - %edi - * 14(%esp) - %ebp - * 18(%esp) - %eax - * 1C(%esp) - %ds - * 20(%esp) - %es - * 24(%esp) - %fs - * 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS - * 2C(%esp) - orig_eax - * 30(%esp) - %eip - * 34(%esp) - %cs - * 38(%esp) - %eflags - * 3C(%esp) - %oldesp - * 40(%esp) - %oldss - * - * "current" is in register %ebx during any slow entries. - */ - -#include <linux/linkage.h> -#include <linux/err.h> -#include <asm/thread_info.h> -#include <asm/irqflags.h> -#include <asm/errno.h> -#include <asm/segment.h> -#include <asm/smp.h> -#include <asm/page_types.h> -#include <asm/percpu.h> -#include <asm/dwarf2.h> -#include <asm/processor-flags.h> -#include <asm/ftrace.h> -#include <asm/irq_vectors.h> -#include <asm/cpufeature.h> -#include <asm/alternative-asm.h> -#include <asm/asm.h> -#include <asm/smap.h> - -/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ -#include <linux/elf-em.h> -#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) -#define __AUDIT_ARCH_LE 0x40000000 - -#ifndef CONFIG_AUDITSYSCALL -#define sysenter_audit syscall_trace_entry -#define sysexit_audit syscall_exit_work -#endif - - .section .entry.text, "ax" - -/* - * We use macros for low-level operations which need to be overridden - * for paravirtualization. The following will never clobber any registers: - * INTERRUPT_RETURN (aka. "iret") - * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax") - * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit"). - * - * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must - * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY). - * Allowing a register to be clobbered can shrink the paravirt replacement - * enough to patch inline, increasing performance. - */ - -#ifdef CONFIG_PREEMPT -#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF -#else -#define preempt_stop(clobbers) -#define resume_kernel restore_all -#endif - -.macro TRACE_IRQS_IRET -#ifdef CONFIG_TRACE_IRQFLAGS - testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off? - jz 1f - TRACE_IRQS_ON -1: -#endif -.endm - -/* - * User gs save/restore - * - * %gs is used for userland TLS and kernel only uses it for stack - * canary which is required to be at %gs:20 by gcc. Read the comment - * at the top of stackprotector.h for more info. - * - * Local labels 98 and 99 are used. - */ -#ifdef CONFIG_X86_32_LAZY_GS - - /* unfortunately push/pop can't be no-op */ -.macro PUSH_GS - pushl_cfi $0 -.endm -.macro POP_GS pop=0 - addl $(4 + \pop), %esp - CFI_ADJUST_CFA_OFFSET -(4 + \pop) -.endm -.macro POP_GS_EX -.endm - - /* all the rest are no-op */ -.macro PTGS_TO_GS -.endm -.macro PTGS_TO_GS_EX -.endm -.macro GS_TO_REG reg -.endm -.macro REG_TO_PTGS reg -.endm -.macro SET_KERNEL_GS reg -.endm - -#else /* CONFIG_X86_32_LAZY_GS */ - -.macro PUSH_GS - pushl_cfi %gs - /*CFI_REL_OFFSET gs, 0*/ -.endm - -.macro POP_GS pop=0 -98: popl_cfi %gs - /*CFI_RESTORE gs*/ - .if \pop <> 0 - add $\pop, %esp - CFI_ADJUST_CFA_OFFSET -\pop - .endif -.endm -.macro POP_GS_EX -.pushsection .fixup, "ax" -99: movl $0, (%esp) - jmp 98b -.popsection - _ASM_EXTABLE(98b,99b) -.endm - -.macro PTGS_TO_GS -98: mov PT_GS(%esp), %gs -.endm -.macro PTGS_TO_GS_EX -.pushsection .fixup, "ax" -99: movl $0, PT_GS(%esp) - jmp 98b -.popsection - _ASM_EXTABLE(98b,99b) -.endm - -.macro GS_TO_REG reg - movl %gs, \reg - /*CFI_REGISTER gs, \reg*/ -.endm -.macro REG_TO_PTGS reg - movl \reg, PT_GS(%esp) - /*CFI_REL_OFFSET gs, PT_GS*/ -.endm -.macro SET_KERNEL_GS reg - movl $(__KERNEL_STACK_CANARY), \reg - movl \reg, %gs -.endm - -#endif /* CONFIG_X86_32_LAZY_GS */ - -.macro SAVE_ALL - cld - PUSH_GS - pushl_cfi %fs - /*CFI_REL_OFFSET fs, 0;*/ - pushl_cfi %es - /*CFI_REL_OFFSET es, 0;*/ - pushl_cfi %ds - /*CFI_REL_OFFSET ds, 0;*/ - pushl_cfi %eax - CFI_REL_OFFSET eax, 0 - pushl_cfi %ebp - CFI_REL_OFFSET ebp, 0 - pushl_cfi %edi - CFI_REL_OFFSET edi, 0 - pushl_cfi %esi - CFI_REL_OFFSET esi, 0 - pushl_cfi %edx - CFI_REL_OFFSET edx, 0 - pushl_cfi %ecx - CFI_REL_OFFSET ecx, 0 - pushl_cfi %ebx - CFI_REL_OFFSET ebx, 0 - movl $(__USER_DS), %edx - movl %edx, %ds - movl %edx, %es - movl $(__KERNEL_PERCPU), %edx - movl %edx, %fs - SET_KERNEL_GS %edx -.endm - -.macro RESTORE_INT_REGS - popl_cfi %ebx - CFI_RESTORE ebx - popl_cfi %ecx - CFI_RESTORE ecx - popl_cfi %edx - CFI_RESTORE edx - popl_cfi %esi - CFI_RESTORE esi - popl_cfi %edi - CFI_RESTORE edi - popl_cfi %ebp - CFI_RESTORE ebp - popl_cfi %eax - CFI_RESTORE eax -.endm - -.macro RESTORE_REGS pop=0 - RESTORE_INT_REGS -1: popl_cfi %ds - /*CFI_RESTORE ds;*/ -2: popl_cfi %es - /*CFI_RESTORE es;*/ -3: popl_cfi %fs - /*CFI_RESTORE fs;*/ - POP_GS \pop -.pushsection .fixup, "ax" -4: movl $0, (%esp) - jmp 1b -5: movl $0, (%esp) - jmp 2b -6: movl $0, (%esp) - jmp 3b -.popsection - _ASM_EXTABLE(1b,4b) - _ASM_EXTABLE(2b,5b) - _ASM_EXTABLE(3b,6b) - POP_GS_EX -.endm - -.macro RING0_INT_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 3*4 - /*CFI_OFFSET cs, -2*4;*/ - CFI_OFFSET eip, -3*4 -.endm - -.macro RING0_EC_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 4*4 - /*CFI_OFFSET cs, -2*4;*/ - CFI_OFFSET eip, -3*4 -.endm - -.macro RING0_PTREGS_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, PT_OLDESP-PT_EBX - /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/ - CFI_OFFSET eip, PT_EIP-PT_OLDESP - /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/ - /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/ - CFI_OFFSET eax, PT_EAX-PT_OLDESP - CFI_OFFSET ebp, PT_EBP-PT_OLDESP - CFI_OFFSET edi, PT_EDI-PT_OLDESP - CFI_OFFSET esi, PT_ESI-PT_OLDESP - CFI_OFFSET edx, PT_EDX-PT_OLDESP - CFI_OFFSET ecx, PT_ECX-PT_OLDESP - CFI_OFFSET ebx, PT_EBX-PT_OLDESP -.endm - -ENTRY(ret_from_fork) - CFI_STARTPROC - pushl_cfi %eax - call schedule_tail - GET_THREAD_INFO(%ebp) - popl_cfi %eax - pushl_cfi $0x0202 # Reset kernel eflags - popfl_cfi - jmp syscall_exit - CFI_ENDPROC -END(ret_from_fork) - -ENTRY(ret_from_kernel_thread) - CFI_STARTPROC - pushl_cfi %eax - call schedule_tail - GET_THREAD_INFO(%ebp) - popl_cfi %eax - pushl_cfi $0x0202 # Reset kernel eflags - popfl_cfi - movl PT_EBP(%esp),%eax - call *PT_EBX(%esp) - movl $0,PT_EAX(%esp) - jmp syscall_exit - CFI_ENDPROC -ENDPROC(ret_from_kernel_thread) - -/* - * Return to user mode is not as complex as all this looks, - * but we want the default path for a system call return to - * go as quickly as possible which is why some of this is - * less clear than it otherwise should be. - */ - - # userspace resumption stub bypassing syscall exit tracing - ALIGN - RING0_PTREGS_FRAME -ret_from_exception: - preempt_stop(CLBR_ANY) -ret_from_intr: - GET_THREAD_INFO(%ebp) -#ifdef CONFIG_VM86 - movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS - movb PT_CS(%esp), %al - andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax -#else - /* - * We can be coming here from child spawned by kernel_thread(). - */ - movl PT_CS(%esp), %eax - andl $SEGMENT_RPL_MASK, %eax -#endif - cmpl $USER_RPL, %eax - jb resume_kernel # not returning to v8086 or userspace - -ENTRY(resume_userspace) - LOCKDEP_SYS_EXIT - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret - TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - andl $_TIF_WORK_MASK, %ecx # is there any work to be done on - # int/exception return? - jne work_pending - jmp restore_all -END(ret_from_exception) - -#ifdef CONFIG_PREEMPT -ENTRY(resume_kernel) - DISABLE_INTERRUPTS(CLBR_ANY) -need_resched: - cmpl $0,PER_CPU_VAR(__preempt_count) - jnz restore_all - testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off (exception path) ? - jz restore_all - call preempt_schedule_irq - jmp need_resched -END(resume_kernel) -#endif - CFI_ENDPROC - -/* SYSENTER_RETURN points to after the "sysenter" instruction in - the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ - - # sysenter call handler stub -ENTRY(ia32_sysenter_target) - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 0 - CFI_REGISTER esp, ebp - movl TSS_sysenter_sp0(%esp),%esp -sysenter_past_esp: - /* - * Interrupts are disabled here, but we can't trace it until - * enough kernel state to call TRACE_IRQS_OFF can be called - but - * we immediately enable interrupts at that point anyway. - */ - pushl_cfi $__USER_DS - /*CFI_REL_OFFSET ss, 0*/ - pushl_cfi %ebp - CFI_REL_OFFSET esp, 0 - pushfl_cfi - orl $X86_EFLAGS_IF, (%esp) - pushl_cfi $__USER_CS - /*CFI_REL_OFFSET cs, 0*/ - /* - * Push current_thread_info()->sysenter_return to the stack. - * A tiny bit of offset fixup is necessary: TI_sysenter_return - * is relative to thread_info, which is at the bottom of the - * kernel stack page. 4*4 means the 4 words pushed above; - * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack; - * and THREAD_SIZE takes us to the bottom. - */ - pushl_cfi ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp) - CFI_REL_OFFSET eip, 0 - - pushl_cfi %eax - SAVE_ALL - ENABLE_INTERRUPTS(CLBR_NONE) - -/* - * Load the potential sixth argument from user stack. - * Careful about security. - */ - cmpl $__PAGE_OFFSET-3,%ebp - jae syscall_fault - ASM_STAC -1: movl (%ebp),%ebp - ASM_CLAC - movl %ebp,PT_EBP(%esp) - _ASM_EXTABLE(1b,syscall_fault) - - GET_THREAD_INFO(%ebp) - - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) - jnz sysenter_audit -sysenter_do_call: - cmpl $(NR_syscalls), %eax - jae sysenter_badsys - call *sys_call_table(,%eax,4) -sysenter_after_call: - movl %eax,PT_EAX(%esp) - LOCKDEP_SYS_EXIT - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - testl $_TIF_ALLWORK_MASK, %ecx - jnz sysexit_audit -sysenter_exit: -/* if something modifies registers it must also disable sysexit */ - movl PT_EIP(%esp), %edx - movl PT_OLDESP(%esp), %ecx - xorl %ebp,%ebp - TRACE_IRQS_ON -1: mov PT_FS(%esp), %fs - PTGS_TO_GS - ENABLE_INTERRUPTS_SYSEXIT - -#ifdef CONFIG_AUDITSYSCALL -sysenter_audit: - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) - jnz syscall_trace_entry - /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */ - movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */ - /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */ - pushl_cfi PT_ESI(%esp) /* a3: 5th arg */ - pushl_cfi PT_EDX+4(%esp) /* a2: 4th arg */ - call __audit_syscall_entry - popl_cfi %ecx /* get that remapped edx off the stack */ - popl_cfi %ecx /* get that remapped esi off the stack */ - movl PT_EAX(%esp),%eax /* reload syscall number */ - jmp sysenter_do_call - -sysexit_audit: - testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx - jnz syscall_exit_work - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_ANY) - movl %eax,%edx /* second arg, syscall return value */ - cmpl $-MAX_ERRNO,%eax /* is it an error ? */ - setbe %al /* 1 if so, 0 if not */ - movzbl %al,%eax /* zero-extend that */ - call __audit_syscall_exit - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx - jnz syscall_exit_work - movl PT_EAX(%esp),%eax /* reload syscall return value */ - jmp sysenter_exit -#endif - - CFI_ENDPROC -.pushsection .fixup,"ax" -2: movl $0,PT_FS(%esp) - jmp 1b -.popsection - _ASM_EXTABLE(1b,2b) - PTGS_TO_GS_EX -ENDPROC(ia32_sysenter_target) - - # system call handler stub -ENTRY(system_call) - RING0_INT_FRAME # can't unwind into user space anyway - ASM_CLAC - pushl_cfi %eax # save orig_eax - SAVE_ALL - GET_THREAD_INFO(%ebp) - # system call tracing in operation / emulation - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) - jnz syscall_trace_entry - cmpl $(NR_syscalls), %eax - jae syscall_badsys -syscall_call: - call *sys_call_table(,%eax,4) -syscall_after_call: - movl %eax,PT_EAX(%esp) # store the return value -syscall_exit: - LOCKDEP_SYS_EXIT - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret - TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - testl $_TIF_ALLWORK_MASK, %ecx # current->work - jnz syscall_exit_work - -restore_all: - TRACE_IRQS_IRET -restore_all_notrace: -#ifdef CONFIG_X86_ESPFIX32 - movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS - # Warning: PT_OLDSS(%esp) contains the wrong/random values if we - # are returning to the kernel. - # See comments in process.c:copy_thread() for details. - movb PT_OLDSS(%esp), %ah - movb PT_CS(%esp), %al - andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax - cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax - CFI_REMEMBER_STATE - je ldt_ss # returning to user-space with LDT SS -#endif -restore_nocheck: - RESTORE_REGS 4 # skip orig_eax/error_code -irq_return: - INTERRUPT_RETURN -.section .fixup,"ax" -ENTRY(iret_exc) - pushl $0 # no error code - pushl $do_iret_error - jmp error_code -.previous - _ASM_EXTABLE(irq_return,iret_exc) - -#ifdef CONFIG_X86_ESPFIX32 - CFI_RESTORE_STATE -ldt_ss: -#ifdef CONFIG_PARAVIRT - /* - * The kernel can't run on a non-flat stack if paravirt mode - * is active. Rather than try to fixup the high bits of - * ESP, bypass this code entirely. This may break DOSemu - * and/or Wine support in a paravirt VM, although the option - * is still available to implement the setting of the high - * 16-bits in the INTERRUPT_RETURN paravirt-op. - */ - cmpl $0, pv_info+PARAVIRT_enabled - jne restore_nocheck -#endif - -/* - * Setup and switch to ESPFIX stack - * - * We're returning to userspace with a 16 bit stack. The CPU will not - * restore the high word of ESP for us on executing iret... This is an - * "official" bug of all the x86-compatible CPUs, which we can work - * around to make dosemu and wine happy. We do this by preloading the - * high word of ESP with the high word of the userspace ESP while - * compensating for the offset by changing to the ESPFIX segment with - * a base address that matches for the difference. - */ -#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8) - mov %esp, %edx /* load kernel esp */ - mov PT_OLDESP(%esp), %eax /* load userspace esp */ - mov %dx, %ax /* eax: new kernel esp */ - sub %eax, %edx /* offset (low word is 0) */ - shr $16, %edx - mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */ - mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */ - pushl_cfi $__ESPFIX_SS - pushl_cfi %eax /* new kernel esp */ - /* Disable interrupts, but do not irqtrace this section: we - * will soon execute iret and the tracer was already set to - * the irqstate after the iret */ - DISABLE_INTERRUPTS(CLBR_EAX) - lss (%esp), %esp /* switch to espfix segment */ - CFI_ADJUST_CFA_OFFSET -8 - jmp restore_nocheck -#endif - CFI_ENDPROC -ENDPROC(system_call) - - # perform work that needs to be done immediately before resumption - ALIGN - RING0_PTREGS_FRAME # can't unwind into user space anyway -work_pending: - testb $_TIF_NEED_RESCHED, %cl - jz work_notifysig -work_resched: - call schedule - LOCKDEP_SYS_EXIT - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret - TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - andl $_TIF_WORK_MASK, %ecx # is there any work to be done other - # than syscall tracing? - jz restore_all - testb $_TIF_NEED_RESCHED, %cl - jnz work_resched - -work_notifysig: # deal with pending signals and - # notify-resume requests -#ifdef CONFIG_VM86 - testl $X86_EFLAGS_VM, PT_EFLAGS(%esp) - movl %esp, %eax - jnz work_notifysig_v86 # returning to kernel-space or - # vm86-space -1: -#else - movl %esp, %eax -#endif - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) - movb PT_CS(%esp), %bl - andb $SEGMENT_RPL_MASK, %bl - cmpb $USER_RPL, %bl - jb resume_kernel - xorl %edx, %edx - call do_notify_resume - jmp resume_userspace - -#ifdef CONFIG_VM86 - ALIGN -work_notifysig_v86: - pushl_cfi %ecx # save ti_flags for do_notify_resume - call save_v86_state # %eax contains pt_regs pointer - popl_cfi %ecx - movl %eax, %esp - jmp 1b -#endif -END(work_pending) - - # perform syscall exit tracing - ALIGN -syscall_trace_entry: - movl $-ENOSYS,PT_EAX(%esp) - movl %esp, %eax - call syscall_trace_enter - /* What it returned is what we'll actually use. */ - cmpl $(NR_syscalls), %eax - jnae syscall_call - jmp syscall_exit -END(syscall_trace_entry) - - # perform syscall exit tracing - ALIGN -syscall_exit_work: - testl $_TIF_WORK_SYSCALL_EXIT, %ecx - jz work_pending - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call - # schedule() instead - movl %esp, %eax - call syscall_trace_leave - jmp resume_userspace -END(syscall_exit_work) - CFI_ENDPROC - - RING0_INT_FRAME # can't unwind into user space anyway -syscall_fault: - ASM_CLAC - GET_THREAD_INFO(%ebp) - movl $-EFAULT,PT_EAX(%esp) - jmp resume_userspace -END(syscall_fault) - -syscall_badsys: - movl $-ENOSYS,%eax - jmp syscall_after_call -END(syscall_badsys) - -sysenter_badsys: - movl $-ENOSYS,%eax - jmp sysenter_after_call -END(sysenter_badsys) - CFI_ENDPROC - -.macro FIXUP_ESPFIX_STACK -/* - * Switch back for ESPFIX stack to the normal zerobased stack - * - * We can't call C functions using the ESPFIX stack. This code reads - * the high word of the segment base from the GDT and swiches to the - * normal stack and adjusts ESP with the matching offset. - */ -#ifdef CONFIG_X86_ESPFIX32 - /* fixup the stack */ - mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */ - mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */ - shl $16, %eax - addl %esp, %eax /* the adjusted stack pointer */ - pushl_cfi $__KERNEL_DS - pushl_cfi %eax - lss (%esp), %esp /* switch to the normal stack segment */ - CFI_ADJUST_CFA_OFFSET -8 -#endif -.endm -.macro UNWIND_ESPFIX_STACK -#ifdef CONFIG_X86_ESPFIX32 - movl %ss, %eax - /* see if on espfix stack */ - cmpw $__ESPFIX_SS, %ax - jne 27f - movl $__KERNEL_DS, %eax - movl %eax, %ds - movl %eax, %es - /* switch to normal stack */ - FIXUP_ESPFIX_STACK -27: -#endif -.endm - -/* - * Build the entry stubs with some assembler magic. - * We pack 1 stub into every 8-byte block. - */ - .align 8 -ENTRY(irq_entries_start) - RING0_INT_FRAME - vector=FIRST_EXTERNAL_VECTOR - .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) - pushl_cfi $(~vector+0x80) /* Note: always in signed byte range */ - vector=vector+1 - jmp common_interrupt - CFI_ADJUST_CFA_OFFSET -4 - .align 8 - .endr -END(irq_entries_start) - -/* - * the CPU automatically disables interrupts when executing an IRQ vector, - * so IRQ-flags tracing has to follow that: - */ - .p2align CONFIG_X86_L1_CACHE_SHIFT -common_interrupt: - ASM_CLAC - addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */ - SAVE_ALL - TRACE_IRQS_OFF - movl %esp,%eax - call do_IRQ - jmp ret_from_intr -ENDPROC(common_interrupt) - CFI_ENDPROC - -#define BUILD_INTERRUPT3(name, nr, fn) \ -ENTRY(name) \ - RING0_INT_FRAME; \ - ASM_CLAC; \ - pushl_cfi $~(nr); \ - SAVE_ALL; \ - TRACE_IRQS_OFF \ - movl %esp,%eax; \ - call fn; \ - jmp ret_from_intr; \ - CFI_ENDPROC; \ -ENDPROC(name) - - -#ifdef CONFIG_TRACING -#define TRACE_BUILD_INTERRUPT(name, nr) \ - BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name) -#else -#define TRACE_BUILD_INTERRUPT(name, nr) -#endif - -#define BUILD_INTERRUPT(name, nr) \ - BUILD_INTERRUPT3(name, nr, smp_##name); \ - TRACE_BUILD_INTERRUPT(name, nr) - -/* The include is where all of the SMP etc. interrupts come from */ -#include <asm/entry_arch.h> - -ENTRY(coprocessor_error) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_coprocessor_error - jmp error_code - CFI_ENDPROC -END(coprocessor_error) - -ENTRY(simd_coprocessor_error) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 -#ifdef CONFIG_X86_INVD_BUG - /* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */ - ALTERNATIVE "pushl_cfi $do_general_protection", \ - "pushl $do_simd_coprocessor_error", \ - X86_FEATURE_XMM -#else - pushl_cfi $do_simd_coprocessor_error -#endif - jmp error_code - CFI_ENDPROC -END(simd_coprocessor_error) - -ENTRY(device_not_available) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $-1 # mark this as an int - pushl_cfi $do_device_not_available - jmp error_code - CFI_ENDPROC -END(device_not_available) - -#ifdef CONFIG_PARAVIRT -ENTRY(native_iret) - iret - _ASM_EXTABLE(native_iret, iret_exc) -END(native_iret) - -ENTRY(native_irq_enable_sysexit) - sti - sysexit -END(native_irq_enable_sysexit) -#endif - -ENTRY(overflow) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_overflow - jmp error_code - CFI_ENDPROC -END(overflow) - -ENTRY(bounds) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_bounds - jmp error_code - CFI_ENDPROC -END(bounds) - -ENTRY(invalid_op) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_invalid_op - jmp error_code - CFI_ENDPROC -END(invalid_op) - -ENTRY(coprocessor_segment_overrun) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_coprocessor_segment_overrun - jmp error_code - CFI_ENDPROC -END(coprocessor_segment_overrun) - -ENTRY(invalid_TSS) - RING0_EC_FRAME - ASM_CLAC - pushl_cfi $do_invalid_TSS - jmp error_code - CFI_ENDPROC -END(invalid_TSS) - -ENTRY(segment_not_present) - RING0_EC_FRAME - ASM_CLAC - pushl_cfi $do_segment_not_present - jmp error_code - CFI_ENDPROC -END(segment_not_present) - -ENTRY(stack_segment) - RING0_EC_FRAME - ASM_CLAC - pushl_cfi $do_stack_segment - jmp error_code - CFI_ENDPROC -END(stack_segment) - -ENTRY(alignment_check) - RING0_EC_FRAME - ASM_CLAC - pushl_cfi $do_alignment_check - jmp error_code - CFI_ENDPROC -END(alignment_check) - -ENTRY(divide_error) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 # no error code - pushl_cfi $do_divide_error - jmp error_code - CFI_ENDPROC -END(divide_error) - -#ifdef CONFIG_X86_MCE -ENTRY(machine_check) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 - pushl_cfi machine_check_vector - jmp error_code - CFI_ENDPROC -END(machine_check) -#endif - -ENTRY(spurious_interrupt_bug) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $0 - pushl_cfi $do_spurious_interrupt_bug - jmp error_code - CFI_ENDPROC -END(spurious_interrupt_bug) - -#ifdef CONFIG_XEN -/* Xen doesn't set %esp to be precisely what the normal sysenter - entrypoint expects, so fix it up before using the normal path. */ -ENTRY(xen_sysenter_target) - RING0_INT_FRAME - addl $5*4, %esp /* remove xen-provided frame */ - CFI_ADJUST_CFA_OFFSET -5*4 - jmp sysenter_past_esp - CFI_ENDPROC - -ENTRY(xen_hypervisor_callback) - CFI_STARTPROC - pushl_cfi $-1 /* orig_ax = -1 => not a system call */ - SAVE_ALL - TRACE_IRQS_OFF - - /* Check to see if we got the event in the critical - region in xen_iret_direct, after we've reenabled - events and checked for pending events. This simulates - iret instruction's behaviour where it delivers a - pending interrupt when enabling interrupts. */ - movl PT_EIP(%esp),%eax - cmpl $xen_iret_start_crit,%eax - jb 1f - cmpl $xen_iret_end_crit,%eax - jae 1f - - jmp xen_iret_crit_fixup - -ENTRY(xen_do_upcall) -1: mov %esp, %eax - call xen_evtchn_do_upcall -#ifndef CONFIG_PREEMPT - call xen_maybe_preempt_hcall -#endif - jmp ret_from_intr - CFI_ENDPROC -ENDPROC(xen_hypervisor_callback) - -# Hypervisor uses this for application faults while it executes. -# We get here for two reasons: -# 1. Fault while reloading DS, ES, FS or GS -# 2. Fault while executing IRET -# Category 1 we fix up by reattempting the load, and zeroing the segment -# register if the load fails. -# Category 2 we fix up by jumping to do_iret_error. We cannot use the -# normal Linux return path in this case because if we use the IRET hypercall -# to pop the stack frame we end up in an infinite loop of failsafe callbacks. -# We distinguish between categories by maintaining a status value in EAX. -ENTRY(xen_failsafe_callback) - CFI_STARTPROC - pushl_cfi %eax - movl $1,%eax -1: mov 4(%esp),%ds -2: mov 8(%esp),%es -3: mov 12(%esp),%fs -4: mov 16(%esp),%gs - /* EAX == 0 => Category 1 (Bad segment) - EAX != 0 => Category 2 (Bad IRET) */ - testl %eax,%eax - popl_cfi %eax - lea 16(%esp),%esp - CFI_ADJUST_CFA_OFFSET -16 - jz 5f - jmp iret_exc -5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */ - SAVE_ALL - jmp ret_from_exception - CFI_ENDPROC - -.section .fixup,"ax" -6: xorl %eax,%eax - movl %eax,4(%esp) - jmp 1b -7: xorl %eax,%eax - movl %eax,8(%esp) - jmp 2b -8: xorl %eax,%eax - movl %eax,12(%esp) - jmp 3b -9: xorl %eax,%eax - movl %eax,16(%esp) - jmp 4b -.previous - _ASM_EXTABLE(1b,6b) - _ASM_EXTABLE(2b,7b) - _ASM_EXTABLE(3b,8b) - _ASM_EXTABLE(4b,9b) -ENDPROC(xen_failsafe_callback) - -BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR, - xen_evtchn_do_upcall) - -#endif /* CONFIG_XEN */ - -#if IS_ENABLED(CONFIG_HYPERV) - -BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR, - hyperv_vector_handler) - -#endif /* CONFIG_HYPERV */ - -#ifdef CONFIG_FUNCTION_TRACER -#ifdef CONFIG_DYNAMIC_FTRACE - -ENTRY(mcount) - ret -END(mcount) - -ENTRY(ftrace_caller) - pushl %eax - pushl %ecx - pushl %edx - pushl $0 /* Pass NULL as regs pointer */ - movl 4*4(%esp), %eax - movl 0x4(%ebp), %edx - movl function_trace_op, %ecx - subl $MCOUNT_INSN_SIZE, %eax - -.globl ftrace_call -ftrace_call: - call ftrace_stub - - addl $4,%esp /* skip NULL pointer */ - popl %edx - popl %ecx - popl %eax -ftrace_ret: -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -.globl ftrace_graph_call -ftrace_graph_call: - jmp ftrace_stub -#endif - -.globl ftrace_stub -ftrace_stub: - ret -END(ftrace_caller) - -ENTRY(ftrace_regs_caller) - pushf /* push flags before compare (in cs location) */ - - /* - * i386 does not save SS and ESP when coming from kernel. - * Instead, to get sp, ®s->sp is used (see ptrace.h). - * Unfortunately, that means eflags must be at the same location - * as the current return ip is. We move the return ip into the - * ip location, and move flags into the return ip location. - */ - pushl 4(%esp) /* save return ip into ip slot */ - - pushl $0 /* Load 0 into orig_ax */ - pushl %gs - pushl %fs - pushl %es - pushl %ds - pushl %eax - pushl %ebp - pushl %edi - pushl %esi - pushl %edx - pushl %ecx - pushl %ebx - - movl 13*4(%esp), %eax /* Get the saved flags */ - movl %eax, 14*4(%esp) /* Move saved flags into regs->flags location */ - /* clobbering return ip */ - movl $__KERNEL_CS,13*4(%esp) - - movl 12*4(%esp), %eax /* Load ip (1st parameter) */ - subl $MCOUNT_INSN_SIZE, %eax /* Adjust ip */ - movl 0x4(%ebp), %edx /* Load parent ip (2nd parameter) */ - movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */ - pushl %esp /* Save pt_regs as 4th parameter */ - -GLOBAL(ftrace_regs_call) - call ftrace_stub - - addl $4, %esp /* Skip pt_regs */ - movl 14*4(%esp), %eax /* Move flags back into cs */ - movl %eax, 13*4(%esp) /* Needed to keep addl from modifying flags */ - movl 12*4(%esp), %eax /* Get return ip from regs->ip */ - movl %eax, 14*4(%esp) /* Put return ip back for ret */ - - popl %ebx - popl %ecx - popl %edx - popl %esi - popl %edi - popl %ebp - popl %eax - popl %ds - popl %es - popl %fs - popl %gs - addl $8, %esp /* Skip orig_ax and ip */ - popf /* Pop flags at end (no addl to corrupt flags) */ - jmp ftrace_ret - - popf - jmp ftrace_stub -#else /* ! CONFIG_DYNAMIC_FTRACE */ - -ENTRY(mcount) - cmpl $__PAGE_OFFSET, %esp - jb ftrace_stub /* Paging not enabled yet? */ - - cmpl $ftrace_stub, ftrace_trace_function - jnz trace -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - cmpl $ftrace_stub, ftrace_graph_return - jnz ftrace_graph_caller - - cmpl $ftrace_graph_entry_stub, ftrace_graph_entry - jnz ftrace_graph_caller -#endif -.globl ftrace_stub -ftrace_stub: - ret - - /* taken from glibc */ -trace: - pushl %eax - pushl %ecx - pushl %edx - movl 0xc(%esp), %eax - movl 0x4(%ebp), %edx - subl $MCOUNT_INSN_SIZE, %eax - - call *ftrace_trace_function - - popl %edx - popl %ecx - popl %eax - jmp ftrace_stub -END(mcount) -#endif /* CONFIG_DYNAMIC_FTRACE */ -#endif /* CONFIG_FUNCTION_TRACER */ - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -ENTRY(ftrace_graph_caller) - pushl %eax - pushl %ecx - pushl %edx - movl 0xc(%esp), %eax - lea 0x4(%ebp), %edx - movl (%ebp), %ecx - subl $MCOUNT_INSN_SIZE, %eax - call prepare_ftrace_return - popl %edx - popl %ecx - popl %eax - ret -END(ftrace_graph_caller) - -.globl return_to_handler -return_to_handler: - pushl %eax - pushl %edx - movl %ebp, %eax - call ftrace_return_to_handler - movl %eax, %ecx - popl %edx - popl %eax - jmp *%ecx -#endif - -#ifdef CONFIG_TRACING -ENTRY(trace_page_fault) - RING0_EC_FRAME - ASM_CLAC - pushl_cfi $trace_do_page_fault - jmp error_code - CFI_ENDPROC -END(trace_page_fault) -#endif - -ENTRY(page_fault) - RING0_EC_FRAME - ASM_CLAC - pushl_cfi $do_page_fault - ALIGN -error_code: - /* the function address is in %gs's slot on the stack */ - pushl_cfi %fs - /*CFI_REL_OFFSET fs, 0*/ - pushl_cfi %es - /*CFI_REL_OFFSET es, 0*/ - pushl_cfi %ds - /*CFI_REL_OFFSET ds, 0*/ - pushl_cfi_reg eax - pushl_cfi_reg ebp - pushl_cfi_reg edi - pushl_cfi_reg esi - pushl_cfi_reg edx - pushl_cfi_reg ecx - pushl_cfi_reg ebx - cld - movl $(__KERNEL_PERCPU), %ecx - movl %ecx, %fs - UNWIND_ESPFIX_STACK - GS_TO_REG %ecx - movl PT_GS(%esp), %edi # get the function address - movl PT_ORIG_EAX(%esp), %edx # get the error code - movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart - REG_TO_PTGS %ecx - SET_KERNEL_GS %ecx - movl $(__USER_DS), %ecx - movl %ecx, %ds - movl %ecx, %es - TRACE_IRQS_OFF - movl %esp,%eax # pt_regs pointer - call *%edi - jmp ret_from_exception - CFI_ENDPROC -END(page_fault) - -/* - * Debug traps and NMI can happen at the one SYSENTER instruction - * that sets up the real kernel stack. Check here, since we can't - * allow the wrong stack to be used. - * - * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have - * already pushed 3 words if it hits on the sysenter instruction: - * eflags, cs and eip. - * - * We just load the right stack, and push the three (known) values - * by hand onto the new stack - while updating the return eip past - * the instruction that would have done it for sysenter. - */ -.macro FIX_STACK offset ok label - cmpw $__KERNEL_CS, 4(%esp) - jne \ok -\label: - movl TSS_sysenter_sp0 + \offset(%esp), %esp - CFI_DEF_CFA esp, 0 - CFI_UNDEFINED eip - pushfl_cfi - pushl_cfi $__KERNEL_CS - pushl_cfi $sysenter_past_esp - CFI_REL_OFFSET eip, 0 -.endm - -ENTRY(debug) - RING0_INT_FRAME - ASM_CLAC - cmpl $ia32_sysenter_target,(%esp) - jne debug_stack_correct - FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn -debug_stack_correct: - pushl_cfi $-1 # mark this as an int - SAVE_ALL - TRACE_IRQS_OFF - xorl %edx,%edx # error code 0 - movl %esp,%eax # pt_regs pointer - call do_debug - jmp ret_from_exception - CFI_ENDPROC -END(debug) - -/* - * NMI is doubly nasty. It can happen _while_ we're handling - * a debug fault, and the debug fault hasn't yet been able to - * clear up the stack. So we first check whether we got an - * NMI on the sysenter entry path, but after that we need to - * check whether we got an NMI on the debug path where the debug - * fault happened on the sysenter path. - */ -ENTRY(nmi) - RING0_INT_FRAME - ASM_CLAC -#ifdef CONFIG_X86_ESPFIX32 - pushl_cfi %eax - movl %ss, %eax - cmpw $__ESPFIX_SS, %ax - popl_cfi %eax - je nmi_espfix_stack -#endif - cmpl $ia32_sysenter_target,(%esp) - je nmi_stack_fixup - pushl_cfi %eax - movl %esp,%eax - /* Do not access memory above the end of our stack page, - * it might not exist. - */ - andl $(THREAD_SIZE-1),%eax - cmpl $(THREAD_SIZE-20),%eax - popl_cfi %eax - jae nmi_stack_correct - cmpl $ia32_sysenter_target,12(%esp) - je nmi_debug_stack_check -nmi_stack_correct: - /* We have a RING0_INT_FRAME here */ - pushl_cfi %eax - SAVE_ALL - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_nmi - jmp restore_all_notrace - CFI_ENDPROC - -nmi_stack_fixup: - RING0_INT_FRAME - FIX_STACK 12, nmi_stack_correct, 1 - jmp nmi_stack_correct - -nmi_debug_stack_check: - /* We have a RING0_INT_FRAME here */ - cmpw $__KERNEL_CS,16(%esp) - jne nmi_stack_correct - cmpl $debug,(%esp) - jb nmi_stack_correct - cmpl $debug_esp_fix_insn,(%esp) - ja nmi_stack_correct - FIX_STACK 24, nmi_stack_correct, 1 - jmp nmi_stack_correct - -#ifdef CONFIG_X86_ESPFIX32 -nmi_espfix_stack: - /* We have a RING0_INT_FRAME here. - * - * create the pointer to lss back - */ - pushl_cfi %ss - pushl_cfi %esp - addl $4, (%esp) - /* copy the iret frame of 12 bytes */ - .rept 3 - pushl_cfi 16(%esp) - .endr - pushl_cfi %eax - SAVE_ALL - FIXUP_ESPFIX_STACK # %eax == %esp - xorl %edx,%edx # zero error code - call do_nmi - RESTORE_REGS - lss 12+4(%esp), %esp # back to espfix stack - CFI_ADJUST_CFA_OFFSET -24 - jmp irq_return -#endif - CFI_ENDPROC -END(nmi) - -ENTRY(int3) - RING0_INT_FRAME - ASM_CLAC - pushl_cfi $-1 # mark this as an int - SAVE_ALL - TRACE_IRQS_OFF - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_int3 - jmp ret_from_exception - CFI_ENDPROC -END(int3) - -ENTRY(general_protection) - RING0_EC_FRAME - pushl_cfi $do_general_protection - jmp error_code - CFI_ENDPROC -END(general_protection) - -#ifdef CONFIG_KVM_GUEST -ENTRY(async_page_fault) - RING0_EC_FRAME - ASM_CLAC - pushl_cfi $do_async_page_fault - jmp error_code - CFI_ENDPROC -END(async_page_fault) -#endif - diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S deleted file mode 100644 index 22aadc917868..000000000000 --- a/arch/x86/kernel/entry_64.S +++ /dev/null @@ -1,1642 +0,0 @@ -/* - * linux/arch/x86_64/entry.S - * - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs - * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> - */ - -/* - * entry.S contains the system-call and fault low-level handling routines. - * - * Some of this is documented in Documentation/x86/entry_64.txt - * - * NOTE: This code handles signal-recognition, which happens every time - * after an interrupt and after each system call. - * - * A note on terminology: - * - iret frame: Architecture defined interrupt frame from SS to RIP - * at the top of the kernel process stack. - * - * Some macro usage: - * - CFI macros are used to generate dwarf2 unwind information for better - * backtraces. They don't change any code. - * - ENTRY/END Define functions in the symbol table. - * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. - * - idtentry - Define exception entry points. - */ - -#include <linux/linkage.h> -#include <asm/segment.h> -#include <asm/cache.h> -#include <asm/errno.h> -#include <asm/dwarf2.h> -#include <asm/calling.h> -#include <asm/asm-offsets.h> -#include <asm/msr.h> -#include <asm/unistd.h> -#include <asm/thread_info.h> -#include <asm/hw_irq.h> -#include <asm/page_types.h> -#include <asm/irqflags.h> -#include <asm/paravirt.h> -#include <asm/percpu.h> -#include <asm/asm.h> -#include <asm/context_tracking.h> -#include <asm/smap.h> -#include <asm/pgtable_types.h> -#include <linux/err.h> - -/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ -#include <linux/elf-em.h> -#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define __AUDIT_ARCH_64BIT 0x80000000 -#define __AUDIT_ARCH_LE 0x40000000 - - .code64 - .section .entry.text, "ax" - - -#ifdef CONFIG_PARAVIRT -ENTRY(native_usergs_sysret64) - swapgs - sysretq -ENDPROC(native_usergs_sysret64) -#endif /* CONFIG_PARAVIRT */ - - -.macro TRACE_IRQS_IRETQ -#ifdef CONFIG_TRACE_IRQFLAGS - bt $9,EFLAGS(%rsp) /* interrupts off? */ - jnc 1f - TRACE_IRQS_ON -1: -#endif -.endm - -/* - * When dynamic function tracer is enabled it will add a breakpoint - * to all locations that it is about to modify, sync CPUs, update - * all the code, sync CPUs, then remove the breakpoints. In this time - * if lockdep is enabled, it might jump back into the debug handler - * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF). - * - * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to - * make sure the stack pointer does not get reset back to the top - * of the debug stack, and instead just reuses the current stack. - */ -#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS) - -.macro TRACE_IRQS_OFF_DEBUG - call debug_stack_set_zero - TRACE_IRQS_OFF - call debug_stack_reset -.endm - -.macro TRACE_IRQS_ON_DEBUG - call debug_stack_set_zero - TRACE_IRQS_ON - call debug_stack_reset -.endm - -.macro TRACE_IRQS_IRETQ_DEBUG - bt $9,EFLAGS(%rsp) /* interrupts off? */ - jnc 1f - TRACE_IRQS_ON_DEBUG -1: -.endm - -#else -# define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF -# define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON -# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ -#endif - -/* - * empty frame - */ - .macro EMPTY_FRAME start=1 offset=0 - .if \start - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,8+\offset - .else - CFI_DEF_CFA_OFFSET 8+\offset - .endif - .endm - -/* - * initial frame state for interrupts (and exceptions without error code) - */ - .macro INTR_FRAME start=1 offset=0 - EMPTY_FRAME \start, 5*8+\offset - /*CFI_REL_OFFSET ss, 4*8+\offset*/ - CFI_REL_OFFSET rsp, 3*8+\offset - /*CFI_REL_OFFSET rflags, 2*8+\offset*/ - /*CFI_REL_OFFSET cs, 1*8+\offset*/ - CFI_REL_OFFSET rip, 0*8+\offset - .endm - -/* - * initial frame state for exceptions with error code (and interrupts - * with vector already pushed) - */ - .macro XCPT_FRAME start=1 offset=0 - INTR_FRAME \start, 1*8+\offset - .endm - -/* - * frame that enables passing a complete pt_regs to a C function. - */ - .macro DEFAULT_FRAME start=1 offset=0 - XCPT_FRAME \start, ORIG_RAX+\offset - CFI_REL_OFFSET rdi, RDI+\offset - CFI_REL_OFFSET rsi, RSI+\offset - CFI_REL_OFFSET rdx, RDX+\offset - CFI_REL_OFFSET rcx, RCX+\offset - CFI_REL_OFFSET rax, RAX+\offset - CFI_REL_OFFSET r8, R8+\offset - CFI_REL_OFFSET r9, R9+\offset - CFI_REL_OFFSET r10, R10+\offset - CFI_REL_OFFSET r11, R11+\offset - CFI_REL_OFFSET rbx, RBX+\offset - CFI_REL_OFFSET rbp, RBP+\offset - CFI_REL_OFFSET r12, R12+\offset - CFI_REL_OFFSET r13, R13+\offset - CFI_REL_OFFSET r14, R14+\offset - CFI_REL_OFFSET r15, R15+\offset - .endm - -/* - * 64bit SYSCALL instruction entry. Up to 6 arguments in registers. - * - * 64bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11, - * then loads new ss, cs, and rip from previously programmed MSRs. - * rflags gets masked by a value from another MSR (so CLD and CLAC - * are not needed). SYSCALL does not save anything on the stack - * and does not change rsp. - * - * Registers on entry: - * rax system call number - * rcx return address - * r11 saved rflags (note: r11 is callee-clobbered register in C ABI) - * rdi arg0 - * rsi arg1 - * rdx arg2 - * r10 arg3 (needs to be moved to rcx to conform to C ABI) - * r8 arg4 - * r9 arg5 - * (note: r12-r15,rbp,rbx are callee-preserved in C ABI) - * - * Only called from user space. - * - * When user can change pt_regs->foo always force IRET. That is because - * it deals with uncanonical addresses better. SYSRET has trouble - * with them due to bugs in both AMD and Intel CPUs. - */ - -ENTRY(system_call) - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rip,rcx - /*CFI_REGISTER rflags,r11*/ - - /* - * Interrupts are off on entry. - * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, - * it is too small to ever cause noticeable irq latency. - */ - SWAPGS_UNSAFE_STACK - /* - * A hypervisor implementation might want to use a label - * after the swapgs, so that it can do the swapgs - * for the guest and jump here on syscall. - */ -GLOBAL(system_call_after_swapgs) - - movq %rsp,PER_CPU_VAR(rsp_scratch) - movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp - - /* Construct struct pt_regs on stack */ - pushq_cfi $__USER_DS /* pt_regs->ss */ - pushq_cfi PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */ - /* - * Re-enable interrupts. - * We use 'rsp_scratch' as a scratch space, hence irq-off block above - * must execute atomically in the face of possible interrupt-driven - * task preemption. We must enable interrupts only after we're done - * with using rsp_scratch: - */ - ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %r11 /* pt_regs->flags */ - pushq_cfi $__USER_CS /* pt_regs->cs */ - pushq_cfi %rcx /* pt_regs->ip */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi $-ENOSYS /* pt_regs->ax */ - pushq_cfi_reg r8 /* pt_regs->r8 */ - pushq_cfi_reg r9 /* pt_regs->r9 */ - pushq_cfi_reg r10 /* pt_regs->r10 */ - pushq_cfi_reg r11 /* pt_regs->r11 */ - sub $(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 6*8 - - testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jnz tracesys -system_call_fastpath: -#if __SYSCALL_MASK == ~0 - cmpq $__NR_syscall_max,%rax -#else - andl $__SYSCALL_MASK,%eax - cmpl $__NR_syscall_max,%eax -#endif - ja 1f /* return -ENOSYS (already in pt_regs->ax) */ - movq %r10,%rcx - call *sys_call_table(,%rax,8) - movq %rax,RAX(%rsp) -1: -/* - * Syscall return path ending with SYSRET (fast path). - * Has incompletely filled pt_regs. - */ - LOCKDEP_SYS_EXIT - /* - * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, - * it is too small to ever cause noticeable irq latency. - */ - DISABLE_INTERRUPTS(CLBR_NONE) - - /* - * We must check ti flags with interrupts (or at least preemption) - * off because we must *never* return to userspace without - * processing exit work that is enqueued if we're preempted here. - * In particular, returning to userspace with any of the one-shot - * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is - * very bad. - */ - testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */ - - CFI_REMEMBER_STATE - - RESTORE_C_REGS_EXCEPT_RCX_R11 - movq RIP(%rsp),%rcx - CFI_REGISTER rip,rcx - movq EFLAGS(%rsp),%r11 - /*CFI_REGISTER rflags,r11*/ - movq RSP(%rsp),%rsp - /* - * 64bit SYSRET restores rip from rcx, - * rflags from r11 (but RF and VM bits are forced to 0), - * cs and ss are loaded from MSRs. - * Restoration of rflags re-enables interrupts. - * - * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss - * descriptor is not reinitialized. This means that we should - * avoid SYSRET with SS == NULL, which could happen if we schedule, - * exit the kernel, and re-enter using an interrupt vector. (All - * interrupt entries on x86_64 set SS to NULL.) We prevent that - * from happening by reloading SS in __switch_to. (Actually - * detecting the failure in 64-bit userspace is tricky but can be - * done.) - */ - USERGS_SYSRET64 - - CFI_RESTORE_STATE - - /* Do syscall entry tracing */ -tracesys: - movq %rsp, %rdi - movl $AUDIT_ARCH_X86_64, %esi - call syscall_trace_enter_phase1 - test %rax, %rax - jnz tracesys_phase2 /* if needed, run the slow path */ - RESTORE_C_REGS_EXCEPT_RAX /* else restore clobbered regs */ - movq ORIG_RAX(%rsp), %rax - jmp system_call_fastpath /* and return to the fast path */ - -tracesys_phase2: - SAVE_EXTRA_REGS - movq %rsp, %rdi - movl $AUDIT_ARCH_X86_64, %esi - movq %rax,%rdx - call syscall_trace_enter_phase2 - - /* - * Reload registers from stack in case ptrace changed them. - * We don't reload %rax because syscall_trace_entry_phase2() returned - * the value it wants us to use in the table lookup. - */ - RESTORE_C_REGS_EXCEPT_RAX - RESTORE_EXTRA_REGS -#if __SYSCALL_MASK == ~0 - cmpq $__NR_syscall_max,%rax -#else - andl $__SYSCALL_MASK,%eax - cmpl $__NR_syscall_max,%eax -#endif - ja 1f /* return -ENOSYS (already in pt_regs->ax) */ - movq %r10,%rcx /* fixup for C */ - call *sys_call_table(,%rax,8) - movq %rax,RAX(%rsp) -1: - /* Use IRET because user could have changed pt_regs->foo */ - -/* - * Syscall return path ending with IRET. - * Has correct iret frame. - */ -GLOBAL(int_ret_from_sys_call) - DISABLE_INTERRUPTS(CLBR_NONE) -int_ret_from_sys_call_irqs_off: /* jumps come here from the irqs-off SYSRET path */ - TRACE_IRQS_OFF - movl $_TIF_ALLWORK_MASK,%edi - /* edi: mask to check */ -GLOBAL(int_with_check) - LOCKDEP_SYS_EXIT_IRQ - GET_THREAD_INFO(%rcx) - movl TI_flags(%rcx),%edx - andl %edi,%edx - jnz int_careful - andl $~TS_COMPAT,TI_status(%rcx) - jmp syscall_return - - /* Either reschedule or signal or syscall exit tracking needed. */ - /* First do a reschedule test. */ - /* edx: work, edi: workmask */ -int_careful: - bt $TIF_NEED_RESCHED,%edx - jnc int_very_careful - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %rdi - SCHEDULE_USER - popq_cfi %rdi - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - jmp int_with_check - - /* handle signals and tracing -- both require a full pt_regs */ -int_very_careful: - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) - SAVE_EXTRA_REGS - /* Check for syscall exit trace */ - testl $_TIF_WORK_SYSCALL_EXIT,%edx - jz int_signal - pushq_cfi %rdi - leaq 8(%rsp),%rdi # &ptregs -> arg1 - call syscall_trace_leave - popq_cfi %rdi - andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi - jmp int_restore_rest - -int_signal: - testl $_TIF_DO_NOTIFY_MASK,%edx - jz 1f - movq %rsp,%rdi # &ptregs -> arg1 - xorl %esi,%esi # oldset -> arg2 - call do_notify_resume -1: movl $_TIF_WORK_MASK,%edi -int_restore_rest: - RESTORE_EXTRA_REGS - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - jmp int_with_check - -syscall_return: - /* The IRETQ could re-enable interrupts: */ - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_IRETQ - - /* - * Try to use SYSRET instead of IRET if we're returning to - * a completely clean 64-bit userspace context. - */ - movq RCX(%rsp),%rcx - movq RIP(%rsp),%r11 - cmpq %rcx,%r11 /* RCX == RIP */ - jne opportunistic_sysret_failed - - /* - * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP - * in kernel space. This essentially lets the user take over - * the kernel, since userspace controls RSP. - * - * If width of "canonical tail" ever becomes variable, this will need - * to be updated to remain correct on both old and new CPUs. - */ - .ifne __VIRTUAL_MASK_SHIFT - 47 - .error "virtual address width changed -- SYSRET checks need update" - .endif - /* Change top 16 bits to be the sign-extension of 47th bit */ - shl $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx - sar $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx - /* If this changed %rcx, it was not canonical */ - cmpq %rcx, %r11 - jne opportunistic_sysret_failed - - cmpq $__USER_CS,CS(%rsp) /* CS must match SYSRET */ - jne opportunistic_sysret_failed - - movq R11(%rsp),%r11 - cmpq %r11,EFLAGS(%rsp) /* R11 == RFLAGS */ - jne opportunistic_sysret_failed - - /* - * SYSRET can't restore RF. SYSRET can restore TF, but unlike IRET, - * restoring TF results in a trap from userspace immediately after - * SYSRET. This would cause an infinite loop whenever #DB happens - * with register state that satisfies the opportunistic SYSRET - * conditions. For example, single-stepping this user code: - * - * movq $stuck_here,%rcx - * pushfq - * popq %r11 - * stuck_here: - * - * would never get past 'stuck_here'. - */ - testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11 - jnz opportunistic_sysret_failed - - /* nothing to check for RSP */ - - cmpq $__USER_DS,SS(%rsp) /* SS must match SYSRET */ - jne opportunistic_sysret_failed - - /* - * We win! This label is here just for ease of understanding - * perf profiles. Nothing jumps here. - */ -syscall_return_via_sysret: - CFI_REMEMBER_STATE - /* rcx and r11 are already restored (see code above) */ - RESTORE_C_REGS_EXCEPT_RCX_R11 - movq RSP(%rsp),%rsp - USERGS_SYSRET64 - CFI_RESTORE_STATE - -opportunistic_sysret_failed: - SWAPGS - jmp restore_c_regs_and_iret - CFI_ENDPROC -END(system_call) - - - .macro FORK_LIKE func -ENTRY(stub_\func) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 /* offset 8: return address */ - SAVE_EXTRA_REGS 8 - jmp sys_\func - CFI_ENDPROC -END(stub_\func) - .endm - - FORK_LIKE clone - FORK_LIKE fork - FORK_LIKE vfork - -ENTRY(stub_execve) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 - call sys_execve -return_from_execve: - testl %eax, %eax - jz 1f - /* exec failed, can use fast SYSRET code path in this case */ - ret -1: - /* must use IRET code path (pt_regs->cs may have changed) */ - addq $8, %rsp - CFI_ADJUST_CFA_OFFSET -8 - ZERO_EXTRA_REGS - movq %rax,RAX(%rsp) - jmp int_ret_from_sys_call - CFI_ENDPROC -END(stub_execve) -/* - * Remaining execve stubs are only 7 bytes long. - * ENTRY() often aligns to 16 bytes, which in this case has no benefits. - */ - .align 8 -GLOBAL(stub_execveat) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 - call sys_execveat - jmp return_from_execve - CFI_ENDPROC -END(stub_execveat) - -#if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION) - .align 8 -GLOBAL(stub_x32_execve) -GLOBAL(stub32_execve) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 - call compat_sys_execve - jmp return_from_execve - CFI_ENDPROC -END(stub32_execve) -END(stub_x32_execve) - .align 8 -GLOBAL(stub_x32_execveat) -GLOBAL(stub32_execveat) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 - call compat_sys_execveat - jmp return_from_execve - CFI_ENDPROC -END(stub32_execveat) -END(stub_x32_execveat) -#endif - -/* - * sigreturn is special because it needs to restore all registers on return. - * This cannot be done with SYSRET, so use the IRET return path instead. - */ -ENTRY(stub_rt_sigreturn) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 - /* - * SAVE_EXTRA_REGS result is not normally needed: - * sigreturn overwrites all pt_regs->GPREGS. - * But sigreturn can fail (!), and there is no easy way to detect that. - * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error, - * we SAVE_EXTRA_REGS here. - */ - SAVE_EXTRA_REGS 8 - call sys_rt_sigreturn -return_from_stub: - addq $8, %rsp - CFI_ADJUST_CFA_OFFSET -8 - RESTORE_EXTRA_REGS - movq %rax,RAX(%rsp) - jmp int_ret_from_sys_call - CFI_ENDPROC -END(stub_rt_sigreturn) - -#ifdef CONFIG_X86_X32_ABI -ENTRY(stub_x32_rt_sigreturn) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 - SAVE_EXTRA_REGS 8 - call sys32_x32_rt_sigreturn - jmp return_from_stub - CFI_ENDPROC -END(stub_x32_rt_sigreturn) -#endif - -/* - * A newly forked process directly context switches into this address. - * - * rdi: prev task we switched from - */ -ENTRY(ret_from_fork) - DEFAULT_FRAME - - LOCK ; btr $TIF_FORK,TI_flags(%r8) - - pushq_cfi $0x0002 - popfq_cfi # reset kernel eflags - - call schedule_tail # rdi: 'prev' task parameter - - RESTORE_EXTRA_REGS - - testb $3, CS(%rsp) # from kernel_thread? - - /* - * By the time we get here, we have no idea whether our pt_regs, - * ti flags, and ti status came from the 64-bit SYSCALL fast path, - * the slow path, or one of the ia32entry paths. - * Use IRET code path to return, since it can safely handle - * all of the above. - */ - jnz int_ret_from_sys_call - - /* We came from kernel_thread */ - /* nb: we depend on RESTORE_EXTRA_REGS above */ - movq %rbp, %rdi - call *%rbx - movl $0, RAX(%rsp) - RESTORE_EXTRA_REGS - jmp int_ret_from_sys_call - CFI_ENDPROC -END(ret_from_fork) - -/* - * Build the entry stubs with some assembler magic. - * We pack 1 stub into every 8-byte block. - */ - .align 8 -ENTRY(irq_entries_start) - INTR_FRAME - vector=FIRST_EXTERNAL_VECTOR - .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) - pushq_cfi $(~vector+0x80) /* Note: always in signed byte range */ - vector=vector+1 - jmp common_interrupt - CFI_ADJUST_CFA_OFFSET -8 - .align 8 - .endr - CFI_ENDPROC -END(irq_entries_start) - -/* - * Interrupt entry/exit. - * - * Interrupt entry points save only callee clobbered registers in fast path. - * - * Entry runs with interrupts off. - */ - -/* 0(%rsp): ~(interrupt number) */ - .macro interrupt func - cld - /* - * Since nothing in interrupt handling code touches r12...r15 members - * of "struct pt_regs", and since interrupts can nest, we can save - * four stack slots and simultaneously provide - * an unwind-friendly stack layout by saving "truncated" pt_regs - * exactly up to rbp slot, without these members. - */ - ALLOC_PT_GPREGS_ON_STACK -RBP - SAVE_C_REGS -RBP - /* this goes to 0(%rsp) for unwinder, not for saving the value: */ - SAVE_EXTRA_REGS_RBP -RBP - - leaq -RBP(%rsp),%rdi /* arg1 for \func (pointer to pt_regs) */ - - testb $3, CS-RBP(%rsp) - jz 1f - SWAPGS -1: - /* - * Save previous stack pointer, optionally switch to interrupt stack. - * irq_count is used to check if a CPU is already on an interrupt stack - * or not. While this is essentially redundant with preempt_count it is - * a little cheaper to use a separate counter in the PDA (short of - * moving irq_enter into assembly, which would be too much work) - */ - movq %rsp, %rsi - incl PER_CPU_VAR(irq_count) - cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp - CFI_DEF_CFA_REGISTER rsi - pushq %rsi - /* - * For debugger: - * "CFA (Current Frame Address) is the value on stack + offset" - */ - CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \ - 0x77 /* DW_OP_breg7 (rsp) */, 0, \ - 0x06 /* DW_OP_deref */, \ - 0x08 /* DW_OP_const1u */, SIZEOF_PTREGS-RBP, \ - 0x22 /* DW_OP_plus */ - /* We entered an interrupt context - irqs are off: */ - TRACE_IRQS_OFF - - call \func - .endm - - /* - * The interrupt stubs push (~vector+0x80) onto the stack and - * then jump to common_interrupt. - */ - .p2align CONFIG_X86_L1_CACHE_SHIFT -common_interrupt: - XCPT_FRAME - ASM_CLAC - addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */ - interrupt do_IRQ - /* 0(%rsp): old RSP */ -ret_from_intr: - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - decl PER_CPU_VAR(irq_count) - - /* Restore saved previous stack */ - popq %rsi - CFI_DEF_CFA rsi,SIZEOF_PTREGS-RBP /* reg/off reset after def_cfa_expr */ - /* return code expects complete pt_regs - adjust rsp accordingly: */ - leaq -RBP(%rsi),%rsp - CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET RBP - - testb $3, CS(%rsp) - jz retint_kernel - /* Interrupt came from user space */ - - GET_THREAD_INFO(%rcx) - /* - * %rcx: thread info. Interrupts off. - */ -retint_with_reschedule: - movl $_TIF_WORK_MASK,%edi -retint_check: - LOCKDEP_SYS_EXIT_IRQ - movl TI_flags(%rcx),%edx - andl %edi,%edx - CFI_REMEMBER_STATE - jnz retint_careful - -retint_swapgs: /* return to user-space */ - /* - * The iretq could re-enable interrupts: - */ - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_IRETQ - - SWAPGS - jmp restore_c_regs_and_iret - -/* Returning to kernel space */ -retint_kernel: -#ifdef CONFIG_PREEMPT - /* Interrupts are off */ - /* Check if we need preemption */ - bt $9,EFLAGS(%rsp) /* interrupts were off? */ - jnc 1f -0: cmpl $0,PER_CPU_VAR(__preempt_count) - jnz 1f - call preempt_schedule_irq - jmp 0b -1: -#endif - /* - * The iretq could re-enable interrupts: - */ - TRACE_IRQS_IRETQ - -/* - * At this label, code paths which return to kernel and to user, - * which come from interrupts/exception and from syscalls, merge. - */ -restore_c_regs_and_iret: - RESTORE_C_REGS - REMOVE_PT_GPREGS_FROM_STACK 8 - -irq_return: - INTERRUPT_RETURN - -ENTRY(native_iret) - /* - * Are we returning to a stack segment from the LDT? Note: in - * 64-bit mode SS:RSP on the exception stack is always valid. - */ -#ifdef CONFIG_X86_ESPFIX64 - testb $4,(SS-RIP)(%rsp) - jnz native_irq_return_ldt -#endif - -.global native_irq_return_iret -native_irq_return_iret: - /* - * This may fault. Non-paranoid faults on return to userspace are - * handled by fixup_bad_iret. These include #SS, #GP, and #NP. - * Double-faults due to espfix64 are handled in do_double_fault. - * Other faults here are fatal. - */ - iretq - -#ifdef CONFIG_X86_ESPFIX64 -native_irq_return_ldt: - pushq_cfi %rax - pushq_cfi %rdi - SWAPGS - movq PER_CPU_VAR(espfix_waddr),%rdi - movq %rax,(0*8)(%rdi) /* RAX */ - movq (2*8)(%rsp),%rax /* RIP */ - movq %rax,(1*8)(%rdi) - movq (3*8)(%rsp),%rax /* CS */ - movq %rax,(2*8)(%rdi) - movq (4*8)(%rsp),%rax /* RFLAGS */ - movq %rax,(3*8)(%rdi) - movq (6*8)(%rsp),%rax /* SS */ - movq %rax,(5*8)(%rdi) - movq (5*8)(%rsp),%rax /* RSP */ - movq %rax,(4*8)(%rdi) - andl $0xffff0000,%eax - popq_cfi %rdi - orq PER_CPU_VAR(espfix_stack),%rax - SWAPGS - movq %rax,%rsp - popq_cfi %rax - jmp native_irq_return_iret -#endif - - /* edi: workmask, edx: work */ -retint_careful: - CFI_RESTORE_STATE - bt $TIF_NEED_RESCHED,%edx - jnc retint_signal - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %rdi - SCHEDULE_USER - popq_cfi %rdi - GET_THREAD_INFO(%rcx) - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - jmp retint_check - -retint_signal: - testl $_TIF_DO_NOTIFY_MASK,%edx - jz retint_swapgs - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) - SAVE_EXTRA_REGS - movq $-1,ORIG_RAX(%rsp) - xorl %esi,%esi # oldset - movq %rsp,%rdi # &pt_regs - call do_notify_resume - RESTORE_EXTRA_REGS - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - GET_THREAD_INFO(%rcx) - jmp retint_with_reschedule - - CFI_ENDPROC -END(common_interrupt) - -/* - * APIC interrupts. - */ -.macro apicinterrupt3 num sym do_sym -ENTRY(\sym) - INTR_FRAME - ASM_CLAC - pushq_cfi $~(\num) -.Lcommon_\sym: - interrupt \do_sym - jmp ret_from_intr - CFI_ENDPROC -END(\sym) -.endm - -#ifdef CONFIG_TRACING -#define trace(sym) trace_##sym -#define smp_trace(sym) smp_trace_##sym - -.macro trace_apicinterrupt num sym -apicinterrupt3 \num trace(\sym) smp_trace(\sym) -.endm -#else -.macro trace_apicinterrupt num sym do_sym -.endm -#endif - -.macro apicinterrupt num sym do_sym -apicinterrupt3 \num \sym \do_sym -trace_apicinterrupt \num \sym -.endm - -#ifdef CONFIG_SMP -apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR \ - irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt -apicinterrupt3 REBOOT_VECTOR \ - reboot_interrupt smp_reboot_interrupt -#endif - -#ifdef CONFIG_X86_UV -apicinterrupt3 UV_BAU_MESSAGE \ - uv_bau_message_intr1 uv_bau_message_interrupt -#endif -apicinterrupt LOCAL_TIMER_VECTOR \ - apic_timer_interrupt smp_apic_timer_interrupt -apicinterrupt X86_PLATFORM_IPI_VECTOR \ - x86_platform_ipi smp_x86_platform_ipi - -#ifdef CONFIG_HAVE_KVM -apicinterrupt3 POSTED_INTR_VECTOR \ - kvm_posted_intr_ipi smp_kvm_posted_intr_ipi -apicinterrupt3 POSTED_INTR_WAKEUP_VECTOR \ - kvm_posted_intr_wakeup_ipi smp_kvm_posted_intr_wakeup_ipi -#endif - -#ifdef CONFIG_X86_MCE_THRESHOLD -apicinterrupt THRESHOLD_APIC_VECTOR \ - threshold_interrupt smp_threshold_interrupt -#endif - -#ifdef CONFIG_X86_THERMAL_VECTOR -apicinterrupt THERMAL_APIC_VECTOR \ - thermal_interrupt smp_thermal_interrupt -#endif - -#ifdef CONFIG_SMP -apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \ - call_function_single_interrupt smp_call_function_single_interrupt -apicinterrupt CALL_FUNCTION_VECTOR \ - call_function_interrupt smp_call_function_interrupt -apicinterrupt RESCHEDULE_VECTOR \ - reschedule_interrupt smp_reschedule_interrupt -#endif - -apicinterrupt ERROR_APIC_VECTOR \ - error_interrupt smp_error_interrupt -apicinterrupt SPURIOUS_APIC_VECTOR \ - spurious_interrupt smp_spurious_interrupt - -#ifdef CONFIG_IRQ_WORK -apicinterrupt IRQ_WORK_VECTOR \ - irq_work_interrupt smp_irq_work_interrupt -#endif - -/* - * Exception entry points. - */ -#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8) - -.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 -ENTRY(\sym) - /* Sanity check */ - .if \shift_ist != -1 && \paranoid == 0 - .error "using shift_ist requires paranoid=1" - .endif - - .if \has_error_code - XCPT_FRAME - .else - INTR_FRAME - .endif - - ASM_CLAC - PARAVIRT_ADJUST_EXCEPTION_FRAME - - .ifeq \has_error_code - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ - .endif - - ALLOC_PT_GPREGS_ON_STACK - - .if \paranoid - .if \paranoid == 1 - CFI_REMEMBER_STATE - testb $3, CS(%rsp) /* If coming from userspace, switch */ - jnz 1f /* stacks. */ - .endif - call paranoid_entry - .else - call error_entry - .endif - /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */ - - DEFAULT_FRAME 0 - - .if \paranoid - .if \shift_ist != -1 - TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */ - .else - TRACE_IRQS_OFF - .endif - .endif - - movq %rsp,%rdi /* pt_regs pointer */ - - .if \has_error_code - movq ORIG_RAX(%rsp),%rsi /* get error code */ - movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */ - .else - xorl %esi,%esi /* no error code */ - .endif - - .if \shift_ist != -1 - subq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist) - .endif - - call \do_sym - - .if \shift_ist != -1 - addq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist) - .endif - - /* these procedures expect "no swapgs" flag in ebx */ - .if \paranoid - jmp paranoid_exit - .else - jmp error_exit - .endif - - .if \paranoid == 1 - CFI_RESTORE_STATE - /* - * Paranoid entry from userspace. Switch stacks and treat it - * as a normal entry. This means that paranoid handlers - * run in real process context if user_mode(regs). - */ -1: - call error_entry - - DEFAULT_FRAME 0 - - movq %rsp,%rdi /* pt_regs pointer */ - call sync_regs - movq %rax,%rsp /* switch stack */ - - movq %rsp,%rdi /* pt_regs pointer */ - - .if \has_error_code - movq ORIG_RAX(%rsp),%rsi /* get error code */ - movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */ - .else - xorl %esi,%esi /* no error code */ - .endif - - call \do_sym - - jmp error_exit /* %ebx: no swapgs flag */ - .endif - - CFI_ENDPROC -END(\sym) -.endm - -#ifdef CONFIG_TRACING -.macro trace_idtentry sym do_sym has_error_code:req -idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code -idtentry \sym \do_sym has_error_code=\has_error_code -.endm -#else -.macro trace_idtentry sym do_sym has_error_code:req -idtentry \sym \do_sym has_error_code=\has_error_code -.endm -#endif - -idtentry divide_error do_divide_error has_error_code=0 -idtentry overflow do_overflow has_error_code=0 -idtentry bounds do_bounds has_error_code=0 -idtentry invalid_op do_invalid_op has_error_code=0 -idtentry device_not_available do_device_not_available has_error_code=0 -idtentry double_fault do_double_fault has_error_code=1 paranoid=2 -idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 -idtentry invalid_TSS do_invalid_TSS has_error_code=1 -idtentry segment_not_present do_segment_not_present has_error_code=1 -idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0 -idtentry coprocessor_error do_coprocessor_error has_error_code=0 -idtentry alignment_check do_alignment_check has_error_code=1 -idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0 - - - /* Reload gs selector with exception handling */ - /* edi: new selector */ -ENTRY(native_load_gs_index) - CFI_STARTPROC - pushfq_cfi - DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI) - SWAPGS -gs_change: - movl %edi,%gs -2: mfence /* workaround */ - SWAPGS - popfq_cfi - ret - CFI_ENDPROC -END(native_load_gs_index) - - _ASM_EXTABLE(gs_change,bad_gs) - .section .fixup,"ax" - /* running with kernelgs */ -bad_gs: - SWAPGS /* switch back to user gs */ - xorl %eax,%eax - movl %eax,%gs - jmp 2b - .previous - -/* Call softirq on interrupt stack. Interrupts are off. */ -ENTRY(do_softirq_own_stack) - CFI_STARTPROC - pushq_cfi %rbp - CFI_REL_OFFSET rbp,0 - mov %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp - incl PER_CPU_VAR(irq_count) - cmove PER_CPU_VAR(irq_stack_ptr),%rsp - push %rbp # backlink for old unwinder - call __do_softirq - leaveq - CFI_RESTORE rbp - CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET -8 - decl PER_CPU_VAR(irq_count) - ret - CFI_ENDPROC -END(do_softirq_own_stack) - -#ifdef CONFIG_XEN -idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0 - -/* - * A note on the "critical region" in our callback handler. - * We want to avoid stacking callback handlers due to events occurring - * during handling of the last event. To do this, we keep events disabled - * until we've done all processing. HOWEVER, we must enable events before - * popping the stack frame (can't be done atomically) and so it would still - * be possible to get enough handler activations to overflow the stack. - * Although unlikely, bugs of that kind are hard to track down, so we'd - * like to avoid the possibility. - * So, on entry to the handler we detect whether we interrupted an - * existing activation in its critical region -- if so, we pop the current - * activation and restart the handler using the previous one. - */ -ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) - CFI_STARTPROC -/* - * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will - * see the correct pointer to the pt_regs - */ - movq %rdi, %rsp # we don't return, adjust the stack frame - CFI_ENDPROC - DEFAULT_FRAME -11: incl PER_CPU_VAR(irq_count) - movq %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp - cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp - pushq %rbp # backlink for old unwinder - call xen_evtchn_do_upcall - popq %rsp - CFI_DEF_CFA_REGISTER rsp - decl PER_CPU_VAR(irq_count) -#ifndef CONFIG_PREEMPT - call xen_maybe_preempt_hcall -#endif - jmp error_exit - CFI_ENDPROC -END(xen_do_hypervisor_callback) - -/* - * Hypervisor uses this for application faults while it executes. - * We get here for two reasons: - * 1. Fault while reloading DS, ES, FS or GS - * 2. Fault while executing IRET - * Category 1 we do not need to fix up as Xen has already reloaded all segment - * registers that could be reloaded and zeroed the others. - * Category 2 we fix up by killing the current process. We cannot use the - * normal Linux return path in this case because if we use the IRET hypercall - * to pop the stack frame we end up in an infinite loop of failsafe callbacks. - * We distinguish between categories by comparing each saved segment register - * with its current contents: any discrepancy means we in category 1. - */ -ENTRY(xen_failsafe_callback) - INTR_FRAME 1 (6*8) - /*CFI_REL_OFFSET gs,GS*/ - /*CFI_REL_OFFSET fs,FS*/ - /*CFI_REL_OFFSET es,ES*/ - /*CFI_REL_OFFSET ds,DS*/ - CFI_REL_OFFSET r11,8 - CFI_REL_OFFSET rcx,0 - movl %ds,%ecx - cmpw %cx,0x10(%rsp) - CFI_REMEMBER_STATE - jne 1f - movl %es,%ecx - cmpw %cx,0x18(%rsp) - jne 1f - movl %fs,%ecx - cmpw %cx,0x20(%rsp) - jne 1f - movl %gs,%ecx - cmpw %cx,0x28(%rsp) - jne 1f - /* All segments match their saved values => Category 2 (Bad IRET). */ - movq (%rsp),%rcx - CFI_RESTORE rcx - movq 8(%rsp),%r11 - CFI_RESTORE r11 - addq $0x30,%rsp - CFI_ADJUST_CFA_OFFSET -0x30 - pushq_cfi $0 /* RIP */ - pushq_cfi %r11 - pushq_cfi %rcx - jmp general_protection - CFI_RESTORE_STATE -1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */ - movq (%rsp),%rcx - CFI_RESTORE rcx - movq 8(%rsp),%r11 - CFI_RESTORE r11 - addq $0x30,%rsp - CFI_ADJUST_CFA_OFFSET -0x30 - pushq_cfi $-1 /* orig_ax = -1 => not a system call */ - ALLOC_PT_GPREGS_ON_STACK - SAVE_C_REGS - SAVE_EXTRA_REGS - jmp error_exit - CFI_ENDPROC -END(xen_failsafe_callback) - -apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ - xen_hvm_callback_vector xen_evtchn_do_upcall - -#endif /* CONFIG_XEN */ - -#if IS_ENABLED(CONFIG_HYPERV) -apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ - hyperv_callback_vector hyperv_vector_handler -#endif /* CONFIG_HYPERV */ - -idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK -idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK -idtentry stack_segment do_stack_segment has_error_code=1 -#ifdef CONFIG_XEN -idtentry xen_debug do_debug has_error_code=0 -idtentry xen_int3 do_int3 has_error_code=0 -idtentry xen_stack_segment do_stack_segment has_error_code=1 -#endif -idtentry general_protection do_general_protection has_error_code=1 -trace_idtentry page_fault do_page_fault has_error_code=1 -#ifdef CONFIG_KVM_GUEST -idtentry async_page_fault do_async_page_fault has_error_code=1 -#endif -#ifdef CONFIG_X86_MCE -idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip) -#endif - -/* - * Save all registers in pt_regs, and switch gs if needed. - * Use slow, but surefire "are we in kernel?" check. - * Return: ebx=0: need swapgs on exit, ebx=1: otherwise - */ -ENTRY(paranoid_entry) - XCPT_FRAME 1 15*8 - cld - SAVE_C_REGS 8 - SAVE_EXTRA_REGS 8 - movl $1,%ebx - movl $MSR_GS_BASE,%ecx - rdmsr - testl %edx,%edx - js 1f /* negative -> in kernel */ - SWAPGS - xorl %ebx,%ebx -1: ret - CFI_ENDPROC -END(paranoid_entry) - -/* - * "Paranoid" exit path from exception stack. This is invoked - * only on return from non-NMI IST interrupts that came - * from kernel space. - * - * We may be returning to very strange contexts (e.g. very early - * in syscall entry), so checking for preemption here would - * be complicated. Fortunately, we there's no good reason - * to try to handle preemption here. - */ -/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */ -ENTRY(paranoid_exit) - DEFAULT_FRAME - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF_DEBUG - testl %ebx,%ebx /* swapgs needed? */ - jnz paranoid_exit_no_swapgs - TRACE_IRQS_IRETQ - SWAPGS_UNSAFE_STACK - jmp paranoid_exit_restore -paranoid_exit_no_swapgs: - TRACE_IRQS_IRETQ_DEBUG -paranoid_exit_restore: - RESTORE_EXTRA_REGS - RESTORE_C_REGS - REMOVE_PT_GPREGS_FROM_STACK 8 - INTERRUPT_RETURN - CFI_ENDPROC -END(paranoid_exit) - -/* - * Save all registers in pt_regs, and switch gs if needed. - * Return: ebx=0: need swapgs on exit, ebx=1: otherwise - */ -ENTRY(error_entry) - XCPT_FRAME 1 15*8 - cld - SAVE_C_REGS 8 - SAVE_EXTRA_REGS 8 - xorl %ebx,%ebx - testb $3, CS+8(%rsp) - jz error_kernelspace -error_swapgs: - SWAPGS -error_sti: - TRACE_IRQS_OFF - ret - - /* - * There are two places in the kernel that can potentially fault with - * usergs. Handle them here. B stepping K8s sometimes report a - * truncated RIP for IRET exceptions returning to compat mode. Check - * for these here too. - */ -error_kernelspace: - CFI_REL_OFFSET rcx, RCX+8 - incl %ebx - leaq native_irq_return_iret(%rip),%rcx - cmpq %rcx,RIP+8(%rsp) - je error_bad_iret - movl %ecx,%eax /* zero extend */ - cmpq %rax,RIP+8(%rsp) - je bstep_iret - cmpq $gs_change,RIP+8(%rsp) - je error_swapgs - jmp error_sti - -bstep_iret: - /* Fix truncated RIP */ - movq %rcx,RIP+8(%rsp) - /* fall through */ - -error_bad_iret: - SWAPGS - mov %rsp,%rdi - call fixup_bad_iret - mov %rax,%rsp - decl %ebx /* Return to usergs */ - jmp error_sti - CFI_ENDPROC -END(error_entry) - - -/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */ -ENTRY(error_exit) - DEFAULT_FRAME - movl %ebx,%eax - RESTORE_EXTRA_REGS - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - GET_THREAD_INFO(%rcx) - testl %eax,%eax - jnz retint_kernel - LOCKDEP_SYS_EXIT_IRQ - movl TI_flags(%rcx),%edx - movl $_TIF_WORK_MASK,%edi - andl %edi,%edx - jnz retint_careful - jmp retint_swapgs - CFI_ENDPROC -END(error_exit) - -/* Runs on exception stack */ -ENTRY(nmi) - INTR_FRAME - PARAVIRT_ADJUST_EXCEPTION_FRAME - /* - * We allow breakpoints in NMIs. If a breakpoint occurs, then - * the iretq it performs will take us out of NMI context. - * This means that we can have nested NMIs where the next - * NMI is using the top of the stack of the previous NMI. We - * can't let it execute because the nested NMI will corrupt the - * stack of the previous NMI. NMI handlers are not re-entrant - * anyway. - * - * To handle this case we do the following: - * Check the a special location on the stack that contains - * a variable that is set when NMIs are executing. - * The interrupted task's stack is also checked to see if it - * is an NMI stack. - * If the variable is not set and the stack is not the NMI - * stack then: - * o Set the special variable on the stack - * o Copy the interrupt frame into a "saved" location on the stack - * o Copy the interrupt frame into a "copy" location on the stack - * o Continue processing the NMI - * If the variable is set or the previous stack is the NMI stack: - * o Modify the "copy" location to jump to the repeate_nmi - * o return back to the first NMI - * - * Now on exit of the first NMI, we first clear the stack variable - * The NMI stack will tell any nested NMIs at that point that it is - * nested. Then we pop the stack normally with iret, and if there was - * a nested NMI that updated the copy interrupt stack frame, a - * jump will be made to the repeat_nmi code that will handle the second - * NMI. - */ - - /* Use %rdx as our temp variable throughout */ - pushq_cfi %rdx - CFI_REL_OFFSET rdx, 0 - - /* - * If %cs was not the kernel segment, then the NMI triggered in user - * space, which means it is definitely not nested. - */ - cmpl $__KERNEL_CS, 16(%rsp) - jne first_nmi - - /* - * Check the special variable on the stack to see if NMIs are - * executing. - */ - cmpl $1, -8(%rsp) - je nested_nmi - - /* - * Now test if the previous stack was an NMI stack. - * We need the double check. We check the NMI stack to satisfy the - * race when the first NMI clears the variable before returning. - * We check the variable because the first NMI could be in a - * breakpoint routine using a breakpoint stack. - */ - lea 6*8(%rsp), %rdx - /* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */ - cmpq %rdx, 4*8(%rsp) - /* If the stack pointer is above the NMI stack, this is a normal NMI */ - ja first_nmi - subq $EXCEPTION_STKSZ, %rdx - cmpq %rdx, 4*8(%rsp) - /* If it is below the NMI stack, it is a normal NMI */ - jb first_nmi - /* Ah, it is within the NMI stack, treat it as nested */ - - CFI_REMEMBER_STATE - -nested_nmi: - /* - * Do nothing if we interrupted the fixup in repeat_nmi. - * It's about to repeat the NMI handler, so we are fine - * with ignoring this one. - */ - movq $repeat_nmi, %rdx - cmpq 8(%rsp), %rdx - ja 1f - movq $end_repeat_nmi, %rdx - cmpq 8(%rsp), %rdx - ja nested_nmi_out - -1: - /* Set up the interrupted NMIs stack to jump to repeat_nmi */ - leaq -1*8(%rsp), %rdx - movq %rdx, %rsp - CFI_ADJUST_CFA_OFFSET 1*8 - leaq -10*8(%rsp), %rdx - pushq_cfi $__KERNEL_DS - pushq_cfi %rdx - pushfq_cfi - pushq_cfi $__KERNEL_CS - pushq_cfi $repeat_nmi - - /* Put stack back */ - addq $(6*8), %rsp - CFI_ADJUST_CFA_OFFSET -6*8 - -nested_nmi_out: - popq_cfi %rdx - CFI_RESTORE rdx - - /* No need to check faults here */ - INTERRUPT_RETURN - - CFI_RESTORE_STATE -first_nmi: - /* - * Because nested NMIs will use the pushed location that we - * stored in rdx, we must keep that space available. - * Here's what our stack frame will look like: - * +-------------------------+ - * | original SS | - * | original Return RSP | - * | original RFLAGS | - * | original CS | - * | original RIP | - * +-------------------------+ - * | temp storage for rdx | - * +-------------------------+ - * | NMI executing variable | - * +-------------------------+ - * | copied SS | - * | copied Return RSP | - * | copied RFLAGS | - * | copied CS | - * | copied RIP | - * +-------------------------+ - * | Saved SS | - * | Saved Return RSP | - * | Saved RFLAGS | - * | Saved CS | - * | Saved RIP | - * +-------------------------+ - * | pt_regs | - * +-------------------------+ - * - * The saved stack frame is used to fix up the copied stack frame - * that a nested NMI may change to make the interrupted NMI iret jump - * to the repeat_nmi. The original stack frame and the temp storage - * is also used by nested NMIs and can not be trusted on exit. - */ - /* Do not pop rdx, nested NMIs will corrupt that part of the stack */ - movq (%rsp), %rdx - CFI_RESTORE rdx - - /* Set the NMI executing variable on the stack. */ - pushq_cfi $1 - - /* - * Leave room for the "copied" frame - */ - subq $(5*8), %rsp - CFI_ADJUST_CFA_OFFSET 5*8 - - /* Copy the stack frame to the Saved frame */ - .rept 5 - pushq_cfi 11*8(%rsp) - .endr - CFI_DEF_CFA_OFFSET 5*8 - - /* Everything up to here is safe from nested NMIs */ - - /* - * If there was a nested NMI, the first NMI's iret will return - * here. But NMIs are still enabled and we can take another - * nested NMI. The nested NMI checks the interrupted RIP to see - * if it is between repeat_nmi and end_repeat_nmi, and if so - * it will just return, as we are about to repeat an NMI anyway. - * This makes it safe to copy to the stack frame that a nested - * NMI will update. - */ -repeat_nmi: - /* - * Update the stack variable to say we are still in NMI (the update - * is benign for the non-repeat case, where 1 was pushed just above - * to this very stack slot). - */ - movq $1, 10*8(%rsp) - - /* Make another copy, this one may be modified by nested NMIs */ - addq $(10*8), %rsp - CFI_ADJUST_CFA_OFFSET -10*8 - .rept 5 - pushq_cfi -6*8(%rsp) - .endr - subq $(5*8), %rsp - CFI_DEF_CFA_OFFSET 5*8 -end_repeat_nmi: - - /* - * Everything below this point can be preempted by a nested - * NMI if the first NMI took an exception and reset our iret stack - * so that we repeat another NMI. - */ - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ - ALLOC_PT_GPREGS_ON_STACK - - /* - * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit - * as we should not be calling schedule in NMI context. - * Even with normal interrupts enabled. An NMI should not be - * setting NEED_RESCHED or anything that normal interrupts and - * exceptions might do. - */ - call paranoid_entry - DEFAULT_FRAME 0 - - /* - * Save off the CR2 register. If we take a page fault in the NMI then - * it could corrupt the CR2 value. If the NMI preempts a page fault - * handler before it was able to read the CR2 register, and then the - * NMI itself takes a page fault, the page fault that was preempted - * will read the information from the NMI page fault and not the - * origin fault. Save it off and restore it if it changes. - * Use the r12 callee-saved register. - */ - movq %cr2, %r12 - - /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ - movq %rsp,%rdi - movq $-1,%rsi - call do_nmi - - /* Did the NMI take a page fault? Restore cr2 if it did */ - movq %cr2, %rcx - cmpq %rcx, %r12 - je 1f - movq %r12, %cr2 -1: - testl %ebx,%ebx /* swapgs needed? */ - jnz nmi_restore -nmi_swapgs: - SWAPGS_UNSAFE_STACK -nmi_restore: - RESTORE_EXTRA_REGS - RESTORE_C_REGS - /* Pop the extra iret frame at once */ - REMOVE_PT_GPREGS_FROM_STACK 6*8 - - /* Clear the NMI executing stack variable */ - movq $0, 5*8(%rsp) - jmp irq_return - CFI_ENDPROC -END(nmi) - -ENTRY(ignore_sysret) - CFI_STARTPROC - mov $-ENOSYS,%eax - sysret - CFI_ENDPROC -END(ignore_sysret) - diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 2b55ee6db053..5a4668136e98 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -167,7 +167,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data) clear_bss(); for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) - set_intr_gate(i, early_idt_handlers[i]); + set_intr_gate(i, early_idt_handler_array[i]); load_idt((const struct desc_ptr *)&idt_descr); copy_bootdata(__va(real_mode_data)); diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 02d257256200..544dec4cc605 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -478,21 +478,22 @@ is486: __INIT setup_once: /* - * Set up a idt with 256 entries pointing to ignore_int, - * interrupt gates. It doesn't actually load idt - that needs - * to be done on each CPU. Interrupts are enabled elsewhere, - * when we can be relatively sure everything is ok. + * Set up a idt with 256 interrupt gates that push zero if there + * is no error code and then jump to early_idt_handler_common. + * It doesn't actually load the idt - that needs to be done on + * each CPU. Interrupts are enabled elsewhere, when we can be + * relatively sure everything is ok. */ movl $idt_table,%edi - movl $early_idt_handlers,%eax + movl $early_idt_handler_array,%eax movl $NUM_EXCEPTION_VECTORS,%ecx 1: movl %eax,(%edi) movl %eax,4(%edi) /* interrupt gate, dpl=0, present */ movl $(0x8E000000 + __KERNEL_CS),2(%edi) - addl $9,%eax + addl $EARLY_IDT_HANDLER_SIZE,%eax addl $8,%edi loop 1b @@ -524,26 +525,28 @@ setup_once: andl $0,setup_once_ref /* Once is enough, thanks */ ret -ENTRY(early_idt_handlers) +ENTRY(early_idt_handler_array) # 36(%esp) %eflags # 32(%esp) %cs # 28(%esp) %eip # 24(%rsp) error code i = 0 .rept NUM_EXCEPTION_VECTORS - .if (EXCEPTION_ERRCODE_MASK >> i) & 1 - ASM_NOP2 - .else + .ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1 pushl $0 # Dummy error code, to make stack frame uniform .endif pushl $i # 20(%esp) Vector number - jmp early_idt_handler + jmp early_idt_handler_common i = i + 1 + .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc .endr -ENDPROC(early_idt_handlers) +ENDPROC(early_idt_handler_array) - /* This is global to keep gas from relaxing the jumps */ -ENTRY(early_idt_handler) +early_idt_handler_common: + /* + * The stack is the hardware frame, an error code or zero, and the + * vector number. + */ cld cmpl $2,(%esp) # X86_TRAP_NMI @@ -603,7 +606,7 @@ ex_entry: .Lis_nmi: addl $8,%esp /* drop vector number and error code */ iret -ENDPROC(early_idt_handler) +ENDPROC(early_idt_handler_common) /* This is the default interrupt "handler" :-) */ ALIGN diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 43eafc8afb69..e5c27f729a38 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -321,26 +321,28 @@ bad_address: jmp bad_address __INIT - .globl early_idt_handlers -early_idt_handlers: +ENTRY(early_idt_handler_array) # 104(%rsp) %rflags # 96(%rsp) %cs # 88(%rsp) %rip # 80(%rsp) error code i = 0 .rept NUM_EXCEPTION_VECTORS - .if (EXCEPTION_ERRCODE_MASK >> i) & 1 - ASM_NOP2 - .else + .ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1 pushq $0 # Dummy error code, to make stack frame uniform .endif pushq $i # 72(%rsp) Vector number - jmp early_idt_handler + jmp early_idt_handler_common i = i + 1 + .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc .endr +ENDPROC(early_idt_handler_array) -/* This is global to keep gas from relaxing the jumps */ -ENTRY(early_idt_handler) +early_idt_handler_common: + /* + * The stack is the hardware frame, an error code or zero, and the + * vector number. + */ cld cmpl $2,(%rsp) # X86_TRAP_NMI @@ -412,7 +414,7 @@ ENTRY(early_idt_handler) .Lis_nmi: addq $16,%rsp # drop vector number and error code INTERRUPT_RETURN -ENDPROC(early_idt_handler) +ENDPROC(early_idt_handler_common) __INITDATA diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 009183276bb7..6185d3141219 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -173,6 +173,21 @@ static void init_thread_xstate(void) xstate_size = sizeof(struct i387_fxsave_struct); else xstate_size = sizeof(struct i387_fsave_struct); + + /* + * Quirk: we don't yet handle the XSAVES* instructions + * correctly, as we don't correctly convert between + * standard and compacted format when interfacing + * with user-space - so disable it for now. + * + * The difference is small: with recent CPUs the + * compacted format is only marginally smaller than + * the standard FPU state format. + * + * ( This is easy to backport while we are fixing + * XSAVES* support. ) + */ + setup_clear_cpu_cap(X86_FEATURE_XSAVES); } /* diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 7e10c8b4b318..88b366487b0e 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -122,6 +122,12 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count); seq_puts(p, " Threshold APIC interrupts\n"); #endif +#ifdef CONFIG_X86_MCE_AMD + seq_printf(p, "%*s: ", prec, "DFR"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_deferred_error_count); + seq_puts(p, " Deferred Error APIC interrupts\n"); +#endif #ifdef CONFIG_X86_MCE seq_printf(p, "%*s: ", prec, "MCE"); for_each_online_cpu(j) diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index 680723a8e4b6..a3a5e158ed69 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -135,6 +135,10 @@ static void __init apic_intr_init(void) alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); #endif +#ifdef CONFIG_X86_MCE_AMD + alloc_intr_gate(DEFERRED_ERROR_VECTOR, deferred_error_interrupt); +#endif + #ifdef CONFIG_X86_LOCAL_APIC /* self generated IPI for local APIC timer */ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index 9435620062df..1681504e44a4 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -584,6 +584,39 @@ static void kvm_kick_cpu(int cpu) kvm_hypercall2(KVM_HC_KICK_CPU, flags, apicid); } + +#ifdef CONFIG_QUEUED_SPINLOCKS + +#include <asm/qspinlock.h> + +static void kvm_wait(u8 *ptr, u8 val) +{ + unsigned long flags; + + if (in_nmi()) + return; + + local_irq_save(flags); + + if (READ_ONCE(*ptr) != val) + goto out; + + /* + * halt until it's our turn and kicked. Note that we do safe halt + * for irq enabled case to avoid hang when lock info is overwritten + * in irq spinlock slowpath and no spurious interrupt occur to save us. + */ + if (arch_irqs_disabled_flags(flags)) + halt(); + else + safe_halt(); + +out: + local_irq_restore(flags); +} + +#else /* !CONFIG_QUEUED_SPINLOCKS */ + enum kvm_contention_stat { TAKEN_SLOW, TAKEN_SLOW_PICKUP, @@ -817,6 +850,8 @@ static void kvm_unlock_kick(struct arch_spinlock *lock, __ticket_t ticket) } } +#endif /* !CONFIG_QUEUED_SPINLOCKS */ + /* * Setup pv_lock_ops to exploit KVM_FEATURE_PV_UNHALT if present. */ @@ -828,8 +863,16 @@ void __init kvm_spinlock_init(void) if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT)) return; +#ifdef CONFIG_QUEUED_SPINLOCKS + __pv_init_lock_hash(); + pv_lock_ops.queued_spin_lock_slowpath = __pv_queued_spin_lock_slowpath; + pv_lock_ops.queued_spin_unlock = PV_CALLEE_SAVE(__pv_queued_spin_unlock); + pv_lock_ops.wait = kvm_wait; + pv_lock_ops.kick = kvm_kick_cpu; +#else /* !CONFIG_QUEUED_SPINLOCKS */ pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(kvm_lock_spinning); pv_lock_ops.unlock_kick = kvm_unlock_kick; +#endif } static __init int kvm_spinlock_init_jump(void) diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 415480d3ea84..11546b462fa6 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -17,6 +17,7 @@ #include <linux/ftrace.h> #include <linux/io.h> #include <linux/suspend.h> +#include <linux/vmalloc.h> #include <asm/init.h> #include <asm/pgtable.h> diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c index bbb6c7316341..33ee3e0efd65 100644 --- a/arch/x86/kernel/paravirt-spinlocks.c +++ b/arch/x86/kernel/paravirt-spinlocks.c @@ -8,11 +8,33 @@ #include <asm/paravirt.h> +#ifdef CONFIG_QUEUED_SPINLOCKS +__visible void __native_queued_spin_unlock(struct qspinlock *lock) +{ + native_queued_spin_unlock(lock); +} + +PV_CALLEE_SAVE_REGS_THUNK(__native_queued_spin_unlock); + +bool pv_is_native_spin_unlock(void) +{ + return pv_lock_ops.queued_spin_unlock.func == + __raw_callee_save___native_queued_spin_unlock; +} +#endif + struct pv_lock_ops pv_lock_ops = { #ifdef CONFIG_SMP +#ifdef CONFIG_QUEUED_SPINLOCKS + .queued_spin_lock_slowpath = native_queued_spin_lock_slowpath, + .queued_spin_unlock = PV_CALLEE_SAVE(__native_queued_spin_unlock), + .wait = paravirt_nop, + .kick = paravirt_nop, +#else /* !CONFIG_QUEUED_SPINLOCKS */ .lock_spinning = __PV_IS_CALLEE_SAVE(paravirt_nop), .unlock_kick = paravirt_nop, -#endif +#endif /* !CONFIG_QUEUED_SPINLOCKS */ +#endif /* SMP */ }; EXPORT_SYMBOL(pv_lock_ops); diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c index d9f32e6d6ab6..e1b013696dde 100644 --- a/arch/x86/kernel/paravirt_patch_32.c +++ b/arch/x86/kernel/paravirt_patch_32.c @@ -12,6 +12,10 @@ DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax"); DEF_NATIVE(pv_cpu_ops, clts, "clts"); DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc"); +#if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS) +DEF_NATIVE(pv_lock_ops, queued_spin_unlock, "movb $0, (%eax)"); +#endif + unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len) { /* arg in %eax, return in %eax */ @@ -24,6 +28,8 @@ unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len) return 0; } +extern bool pv_is_native_spin_unlock(void); + unsigned native_patch(u8 type, u16 clobbers, void *ibuf, unsigned long addr, unsigned len) { @@ -47,14 +53,22 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf, PATCH_SITE(pv_mmu_ops, write_cr3); PATCH_SITE(pv_cpu_ops, clts); PATCH_SITE(pv_cpu_ops, read_tsc); - - patch_site: - ret = paravirt_patch_insns(ibuf, len, start, end); - break; +#if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS) + case PARAVIRT_PATCH(pv_lock_ops.queued_spin_unlock): + if (pv_is_native_spin_unlock()) { + start = start_pv_lock_ops_queued_spin_unlock; + end = end_pv_lock_ops_queued_spin_unlock; + goto patch_site; + } +#endif default: ret = paravirt_patch_default(type, clobbers, ibuf, addr, len); break; + +patch_site: + ret = paravirt_patch_insns(ibuf, len, start, end); + break; } #undef PATCH_SITE return ret; diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c index 0de21c62c348..8aa05583bc42 100644 --- a/arch/x86/kernel/paravirt_patch_64.c +++ b/arch/x86/kernel/paravirt_patch_64.c @@ -21,6 +21,10 @@ DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs"); DEF_NATIVE(, mov32, "mov %edi, %eax"); DEF_NATIVE(, mov64, "mov %rdi, %rax"); +#if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS) +DEF_NATIVE(pv_lock_ops, queued_spin_unlock, "movb $0, (%rdi)"); +#endif + unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len) { return paravirt_patch_insns(insnbuf, len, @@ -33,6 +37,8 @@ unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len) start__mov64, end__mov64); } +extern bool pv_is_native_spin_unlock(void); + unsigned native_patch(u8 type, u16 clobbers, void *ibuf, unsigned long addr, unsigned len) { @@ -58,14 +64,22 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf, PATCH_SITE(pv_cpu_ops, clts); PATCH_SITE(pv_mmu_ops, flush_tlb_single); PATCH_SITE(pv_cpu_ops, wbinvd); - - patch_site: - ret = paravirt_patch_insns(ibuf, len, start, end); - break; +#if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS) + case PARAVIRT_PATCH(pv_lock_ops.queued_spin_unlock): + if (pv_is_native_spin_unlock()) { + start = start_pv_lock_ops_queued_spin_unlock; + end = end_pv_lock_ops_queued_spin_unlock; + goto patch_site; + } +#endif default: ret = paravirt_patch_default(type, clobbers, ibuf, addr, len); break; + +patch_site: + ret = paravirt_patch_insns(ibuf, len, start, end); + break; } #undef PATCH_SITE return ret; diff --git a/arch/x86/kernel/syscall_32.c b/arch/x86/kernel/syscall_32.c deleted file mode 100644 index 3777189c4a19..000000000000 --- a/arch/x86/kernel/syscall_32.c +++ /dev/null @@ -1,33 +0,0 @@ -/* System call table for i386. */ - -#include <linux/linkage.h> -#include <linux/sys.h> -#include <linux/cache.h> -#include <asm/asm-offsets.h> - -#ifdef CONFIG_IA32_EMULATION -#define SYM(sym, compat) compat -#else -#define SYM(sym, compat) sym -#define ia32_sys_call_table sys_call_table -#define __NR_ia32_syscall_max __NR_syscall_max -#endif - -#define __SYSCALL_I386(nr, sym, compat) extern asmlinkage void SYM(sym, compat)(void) ; -#include <asm/syscalls_32.h> -#undef __SYSCALL_I386 - -#define __SYSCALL_I386(nr, sym, compat) [nr] = SYM(sym, compat), - -typedef asmlinkage void (*sys_call_ptr_t)(void); - -extern asmlinkage void sys_ni_syscall(void); - -__visible const sys_call_ptr_t ia32_sys_call_table[__NR_ia32_syscall_max+1] = { - /* - * Smells like a compiler bug -- it doesn't work - * when the & below is removed. - */ - [0 ... __NR_ia32_syscall_max] = &sys_ni_syscall, -#include <asm/syscalls_32.h> -}; diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c deleted file mode 100644 index 4ac730b37f0b..000000000000 --- a/arch/x86/kernel/syscall_64.c +++ /dev/null @@ -1,32 +0,0 @@ -/* System call table for x86-64. */ - -#include <linux/linkage.h> -#include <linux/sys.h> -#include <linux/cache.h> -#include <asm/asm-offsets.h> -#include <asm/syscall.h> - -#define __SYSCALL_COMMON(nr, sym, compat) __SYSCALL_64(nr, sym, compat) - -#ifdef CONFIG_X86_X32_ABI -# define __SYSCALL_X32(nr, sym, compat) __SYSCALL_64(nr, sym, compat) -#else -# define __SYSCALL_X32(nr, sym, compat) /* nothing */ -#endif - -#define __SYSCALL_64(nr, sym, compat) extern asmlinkage void sym(void) ; -#include <asm/syscalls_64.h> -#undef __SYSCALL_64 - -#define __SYSCALL_64(nr, sym, compat) [nr] = sym, - -extern void sys_ni_syscall(void); - -asmlinkage const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = { - /* - * Smells like a compiler bug -- it doesn't work - * when the & below is removed. - */ - [0 ... __NR_syscall_max] = &sys_ni_syscall, -#include <asm/syscalls_64.h> -}; diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 5e0791f9d3dc..de379366f6d1 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -72,8 +72,7 @@ gate_desc debug_idt_table[NR_VECTORS] __page_aligned_bss; #else #include <asm/processor-flags.h> #include <asm/setup.h> - -asmlinkage int system_call(void); +#include <asm/proto.h> #endif /* Must be page-aligned because the real IDT is used in a fixmap. */ @@ -813,18 +812,6 @@ dotraplinkage void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code) { conditional_sti(regs); -#if 0 - /* No need to warn about this any longer. */ - pr_info("Ignoring P6 Local APIC Spurious Interrupt Bug...\n"); -#endif -} - -asmlinkage __visible void __attribute__((weak)) smp_thermal_interrupt(void) -{ -} - -asmlinkage __visible void __attribute__((weak)) smp_threshold_interrupt(void) -{ } /* @@ -992,12 +979,12 @@ void __init trap_init(void) set_bit(i, used_vectors); #ifdef CONFIG_IA32_EMULATION - set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall); + set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_compat); set_bit(IA32_SYSCALL_VECTOR, used_vectors); #endif #ifdef CONFIG_X86_32 - set_system_trap_gate(IA32_SYSCALL_VECTOR, &system_call); + set_system_trap_gate(IA32_SYSCALL_VECTOR, entry_INT80_32); set_bit(IA32_SYSCALL_VECTOR, used_vectors); #endif diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c deleted file mode 100644 index 2dcc6ff6fdcc..000000000000 --- a/arch/x86/kernel/vsyscall_64.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * Copyright (c) 2012-2014 Andy Lutomirski <luto@amacapital.net> - * - * Based on the original implementation which is: - * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE - * Copyright 2003 Andi Kleen, SuSE Labs. - * - * Parts of the original code have been moved to arch/x86/vdso/vma.c - * - * This file implements vsyscall emulation. vsyscalls are a legacy ABI: - * Userspace can request certain kernel services by calling fixed - * addresses. This concept is problematic: - * - * - It interferes with ASLR. - * - It's awkward to write code that lives in kernel addresses but is - * callable by userspace at fixed addresses. - * - The whole concept is impossible for 32-bit compat userspace. - * - UML cannot easily virtualize a vsyscall. - * - * As of mid-2014, I believe that there is no new userspace code that - * will use a vsyscall if the vDSO is present. I hope that there will - * soon be no new userspace code that will ever use a vsyscall. - * - * The code in this file emulates vsyscalls when notified of a page - * fault to a vsyscall address. - */ - -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/syscalls.h> -#include <linux/ratelimit.h> - -#include <asm/vsyscall.h> -#include <asm/unistd.h> -#include <asm/fixmap.h> -#include <asm/traps.h> - -#define CREATE_TRACE_POINTS -#include "vsyscall_trace.h" - -static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE; - -static int __init vsyscall_setup(char *str) -{ - if (str) { - if (!strcmp("emulate", str)) - vsyscall_mode = EMULATE; - else if (!strcmp("native", str)) - vsyscall_mode = NATIVE; - else if (!strcmp("none", str)) - vsyscall_mode = NONE; - else - return -EINVAL; - - return 0; - } - - return -EINVAL; -} -early_param("vsyscall", vsyscall_setup); - -static void warn_bad_vsyscall(const char *level, struct pt_regs *regs, - const char *message) -{ - if (!show_unhandled_signals) - return; - - printk_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n", - level, current->comm, task_pid_nr(current), - message, regs->ip, regs->cs, - regs->sp, regs->ax, regs->si, regs->di); -} - -static int addr_to_vsyscall_nr(unsigned long addr) -{ - int nr; - - if ((addr & ~0xC00UL) != VSYSCALL_ADDR) - return -EINVAL; - - nr = (addr & 0xC00UL) >> 10; - if (nr >= 3) - return -EINVAL; - - return nr; -} - -static bool write_ok_or_segv(unsigned long ptr, size_t size) -{ - /* - * XXX: if access_ok, get_user, and put_user handled - * sig_on_uaccess_error, this could go away. - */ - - if (!access_ok(VERIFY_WRITE, (void __user *)ptr, size)) { - siginfo_t info; - struct thread_struct *thread = ¤t->thread; - - thread->error_code = 6; /* user fault, no page, write */ - thread->cr2 = ptr; - thread->trap_nr = X86_TRAP_PF; - - memset(&info, 0, sizeof(info)); - info.si_signo = SIGSEGV; - info.si_errno = 0; - info.si_code = SEGV_MAPERR; - info.si_addr = (void __user *)ptr; - - force_sig_info(SIGSEGV, &info, current); - return false; - } else { - return true; - } -} - -bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) -{ - struct task_struct *tsk; - unsigned long caller; - int vsyscall_nr, syscall_nr, tmp; - int prev_sig_on_uaccess_error; - long ret; - - /* - * No point in checking CS -- the only way to get here is a user mode - * trap to a high address, which means that we're in 64-bit user code. - */ - - WARN_ON_ONCE(address != regs->ip); - - if (vsyscall_mode == NONE) { - warn_bad_vsyscall(KERN_INFO, regs, - "vsyscall attempted with vsyscall=none"); - return false; - } - - vsyscall_nr = addr_to_vsyscall_nr(address); - - trace_emulate_vsyscall(vsyscall_nr); - - if (vsyscall_nr < 0) { - warn_bad_vsyscall(KERN_WARNING, regs, - "misaligned vsyscall (exploit attempt or buggy program) -- look up the vsyscall kernel parameter if you need a workaround"); - goto sigsegv; - } - - if (get_user(caller, (unsigned long __user *)regs->sp) != 0) { - warn_bad_vsyscall(KERN_WARNING, regs, - "vsyscall with bad stack (exploit attempt?)"); - goto sigsegv; - } - - tsk = current; - - /* - * Check for access_ok violations and find the syscall nr. - * - * NULL is a valid user pointer (in the access_ok sense) on 32-bit and - * 64-bit, so we don't need to special-case it here. For all the - * vsyscalls, NULL means "don't write anything" not "write it at - * address 0". - */ - switch (vsyscall_nr) { - case 0: - if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) || - !write_ok_or_segv(regs->si, sizeof(struct timezone))) { - ret = -EFAULT; - goto check_fault; - } - - syscall_nr = __NR_gettimeofday; - break; - - case 1: - if (!write_ok_or_segv(regs->di, sizeof(time_t))) { - ret = -EFAULT; - goto check_fault; - } - - syscall_nr = __NR_time; - break; - - case 2: - if (!write_ok_or_segv(regs->di, sizeof(unsigned)) || - !write_ok_or_segv(regs->si, sizeof(unsigned))) { - ret = -EFAULT; - goto check_fault; - } - - syscall_nr = __NR_getcpu; - break; - } - - /* - * Handle seccomp. regs->ip must be the original value. - * See seccomp_send_sigsys and Documentation/prctl/seccomp_filter.txt. - * - * We could optimize the seccomp disabled case, but performance - * here doesn't matter. - */ - regs->orig_ax = syscall_nr; - regs->ax = -ENOSYS; - tmp = secure_computing(); - if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) { - warn_bad_vsyscall(KERN_DEBUG, regs, - "seccomp tried to change syscall nr or ip"); - do_exit(SIGSYS); - } - regs->orig_ax = -1; - if (tmp) - goto do_ret; /* skip requested */ - - /* - * With a real vsyscall, page faults cause SIGSEGV. We want to - * preserve that behavior to make writing exploits harder. - */ - prev_sig_on_uaccess_error = current_thread_info()->sig_on_uaccess_error; - current_thread_info()->sig_on_uaccess_error = 1; - - ret = -EFAULT; - switch (vsyscall_nr) { - case 0: - ret = sys_gettimeofday( - (struct timeval __user *)regs->di, - (struct timezone __user *)regs->si); - break; - - case 1: - ret = sys_time((time_t __user *)regs->di); - break; - - case 2: - ret = sys_getcpu((unsigned __user *)regs->di, - (unsigned __user *)regs->si, - NULL); - break; - } - - current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error; - -check_fault: - if (ret == -EFAULT) { - /* Bad news -- userspace fed a bad pointer to a vsyscall. */ - warn_bad_vsyscall(KERN_INFO, regs, - "vsyscall fault (exploit attempt?)"); - - /* - * If we failed to generate a signal for any reason, - * generate one here. (This should be impossible.) - */ - if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) && - !sigismember(&tsk->pending.signal, SIGSEGV))) - goto sigsegv; - - return true; /* Don't emulate the ret. */ - } - - regs->ax = ret; - -do_ret: - /* Emulate a ret instruction. */ - regs->ip = caller; - regs->sp += 8; - return true; - -sigsegv: - force_sig(SIGSEGV, current); - return true; -} - -/* - * A pseudo VMA to allow ptrace access for the vsyscall page. This only - * covers the 64bit vsyscall page now. 32bit has a real VMA now and does - * not need special handling anymore: - */ -static const char *gate_vma_name(struct vm_area_struct *vma) -{ - return "[vsyscall]"; -} -static struct vm_operations_struct gate_vma_ops = { - .name = gate_vma_name, -}; -static struct vm_area_struct gate_vma = { - .vm_start = VSYSCALL_ADDR, - .vm_end = VSYSCALL_ADDR + PAGE_SIZE, - .vm_page_prot = PAGE_READONLY_EXEC, - .vm_flags = VM_READ | VM_EXEC, - .vm_ops = &gate_vma_ops, -}; - -struct vm_area_struct *get_gate_vma(struct mm_struct *mm) -{ -#ifdef CONFIG_IA32_EMULATION - if (!mm || mm->context.ia32_compat) - return NULL; -#endif - if (vsyscall_mode == NONE) - return NULL; - return &gate_vma; -} - -int in_gate_area(struct mm_struct *mm, unsigned long addr) -{ - struct vm_area_struct *vma = get_gate_vma(mm); - - if (!vma) - return 0; - - return (addr >= vma->vm_start) && (addr < vma->vm_end); -} - -/* - * Use this when you have no reliable mm, typically from interrupt - * context. It is less reliable than using a task's mm and may give - * false positives. - */ -int in_gate_area_no_mm(unsigned long addr) -{ - return vsyscall_mode != NONE && (addr & PAGE_MASK) == VSYSCALL_ADDR; -} - -void __init map_vsyscall(void) -{ - extern char __vsyscall_page; - unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page); - - if (vsyscall_mode != NONE) - __set_fixmap(VSYSCALL_PAGE, physaddr_vsyscall, - vsyscall_mode == NATIVE - ? PAGE_KERNEL_VSYSCALL - : PAGE_KERNEL_VVAR); - - BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_PAGE) != - (unsigned long)VSYSCALL_ADDR); -} diff --git a/arch/x86/kernel/vsyscall_emu_64.S b/arch/x86/kernel/vsyscall_emu_64.S deleted file mode 100644 index c9596a9af159..000000000000 --- a/arch/x86/kernel/vsyscall_emu_64.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * vsyscall_emu_64.S: Vsyscall emulation page - * - * Copyright (c) 2011 Andy Lutomirski - * - * Subject to the GNU General Public License, version 2 - */ - -#include <linux/linkage.h> - -#include <asm/irq_vectors.h> -#include <asm/page_types.h> -#include <asm/unistd_64.h> - -__PAGE_ALIGNED_DATA - .globl __vsyscall_page - .balign PAGE_SIZE, 0xcc - .type __vsyscall_page, @object -__vsyscall_page: - - mov $__NR_gettimeofday, %rax - syscall - ret - - .balign 1024, 0xcc - mov $__NR_time, %rax - syscall - ret - - .balign 1024, 0xcc - mov $__NR_getcpu, %rax - syscall - ret - - .balign 4096, 0xcc - - .size __vsyscall_page, 4096 diff --git a/arch/x86/kernel/vsyscall_gtod.c b/arch/x86/kernel/vsyscall_gtod.c deleted file mode 100644 index 51e330416995..000000000000 --- a/arch/x86/kernel/vsyscall_gtod.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE - * Copyright 2003 Andi Kleen, SuSE Labs. - * - * Modified for x86 32 bit architecture by - * Stefani Seibold <stefani@seibold.net> - * sponsored by Rohde & Schwarz GmbH & Co. KG Munich/Germany - * - * Thanks to hpa@transmeta.com for some useful hint. - * Special thanks to Ingo Molnar for his early experience with - * a different vsyscall implementation for Linux/IA32 and for the name. - * - */ - -#include <linux/timekeeper_internal.h> -#include <asm/vgtod.h> -#include <asm/vvar.h> - -DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data); - -void update_vsyscall_tz(void) -{ - vsyscall_gtod_data.tz_minuteswest = sys_tz.tz_minuteswest; - vsyscall_gtod_data.tz_dsttime = sys_tz.tz_dsttime; -} - -void update_vsyscall(struct timekeeper *tk) -{ - struct vsyscall_gtod_data *vdata = &vsyscall_gtod_data; - - gtod_write_begin(vdata); - - /* copy vsyscall data */ - vdata->vclock_mode = tk->tkr_mono.clock->archdata.vclock_mode; - vdata->cycle_last = tk->tkr_mono.cycle_last; - vdata->mask = tk->tkr_mono.mask; - vdata->mult = tk->tkr_mono.mult; - vdata->shift = tk->tkr_mono.shift; - - vdata->wall_time_sec = tk->xtime_sec; - vdata->wall_time_snsec = tk->tkr_mono.xtime_nsec; - - vdata->monotonic_time_sec = tk->xtime_sec - + tk->wall_to_monotonic.tv_sec; - vdata->monotonic_time_snsec = tk->tkr_mono.xtime_nsec - + ((u64)tk->wall_to_monotonic.tv_nsec - << tk->tkr_mono.shift); - while (vdata->monotonic_time_snsec >= - (((u64)NSEC_PER_SEC) << tk->tkr_mono.shift)) { - vdata->monotonic_time_snsec -= - ((u64)NSEC_PER_SEC) << tk->tkr_mono.shift; - vdata->monotonic_time_sec++; - } - - vdata->wall_time_coarse_sec = tk->xtime_sec; - vdata->wall_time_coarse_nsec = (long)(tk->tkr_mono.xtime_nsec >> - tk->tkr_mono.shift); - - vdata->monotonic_time_coarse_sec = - vdata->wall_time_coarse_sec + tk->wall_to_monotonic.tv_sec; - vdata->monotonic_time_coarse_nsec = - vdata->wall_time_coarse_nsec + tk->wall_to_monotonic.tv_nsec; - - while (vdata->monotonic_time_coarse_nsec >= NSEC_PER_SEC) { - vdata->monotonic_time_coarse_nsec -= NSEC_PER_SEC; - vdata->monotonic_time_coarse_sec++; - } - - gtod_write_end(vdata); -} diff --git a/arch/x86/kernel/vsyscall_trace.h b/arch/x86/kernel/vsyscall_trace.h deleted file mode 100644 index a8b2edec54fe..000000000000 --- a/arch/x86/kernel/vsyscall_trace.h +++ /dev/null @@ -1,29 +0,0 @@ -#undef TRACE_SYSTEM -#define TRACE_SYSTEM vsyscall - -#if !defined(__VSYSCALL_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) -#define __VSYSCALL_TRACE_H - -#include <linux/tracepoint.h> - -TRACE_EVENT(emulate_vsyscall, - - TP_PROTO(int nr), - - TP_ARGS(nr), - - TP_STRUCT__entry(__field(int, nr)), - - TP_fast_assign( - __entry->nr = nr; - ), - - TP_printk("nr = %d", __entry->nr) -); - -#endif - -#undef TRACE_INCLUDE_PATH -#define TRACE_INCLUDE_PATH ../../arch/x86/kernel -#define TRACE_INCLUDE_FILE vsyscall_trace -#include <trace/define_trace.h> |
