diff options
Diffstat (limited to 'arch/x86/kernel/apic_64.c')
| -rw-r--r-- | arch/x86/kernel/apic_64.c | 1390 |
1 files changed, 0 insertions, 1390 deletions
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c deleted file mode 100644 index 446c062e831c..000000000000 --- a/arch/x86/kernel/apic_64.c +++ /dev/null @@ -1,1390 +0,0 @@ -/* - * Local APIC handling, local APIC timers - * - * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com> - * - * Fixes - * Maciej W. Rozycki : Bits for genuine 82489DX APICs; - * thanks to Eric Gilmore - * and Rolf G. Tews - * for testing these extensively. - * Maciej W. Rozycki : Various updates and fixes. - * Mikael Pettersson : Power Management for UP-APIC. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. - */ - -#include <linux/init.h> - -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/bootmem.h> -#include <linux/interrupt.h> -#include <linux/mc146818rtc.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/ioport.h> -#include <linux/clockchips.h> -#include <linux/acpi_pmtmr.h> -#include <linux/module.h> - -#include <asm/atomic.h> -#include <asm/smp.h> -#include <asm/mtrr.h> -#include <asm/mpspec.h> -#include <asm/hpet.h> -#include <asm/pgalloc.h> -#include <asm/nmi.h> -#include <asm/idle.h> -#include <asm/proto.h> -#include <asm/timex.h> -#include <asm/apic.h> - -#include <mach_ipi.h> -#include <mach_apic.h> - -static int disable_apic_timer __cpuinitdata; -static int apic_calibrate_pmtmr __initdata; -int disable_apic; - -/* Local APIC timer works in C2 */ -int local_apic_timer_c2_ok; -EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); - -/* - * Debug level, exported for io_apic.c - */ -unsigned int apic_verbosity; - -/* Have we found an MP table */ -int smp_found_config; - -static struct resource lapic_resource = { - .name = "Local APIC", - .flags = IORESOURCE_MEM | IORESOURCE_BUSY, -}; - -static unsigned int calibration_result; - -static int lapic_next_event(unsigned long delta, - struct clock_event_device *evt); -static void lapic_timer_setup(enum clock_event_mode mode, - struct clock_event_device *evt); -static void lapic_timer_broadcast(cpumask_t mask); -static void apic_pm_activate(void); - -static struct clock_event_device lapic_clockevent = { - .name = "lapic", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT - | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, - .shift = 32, - .set_mode = lapic_timer_setup, - .set_next_event = lapic_next_event, - .broadcast = lapic_timer_broadcast, - .rating = 100, - .irq = -1, -}; -static DEFINE_PER_CPU(struct clock_event_device, lapic_events); - -static unsigned long apic_phys; - -unsigned long mp_lapic_addr; - -/* - * Get the LAPIC version - */ -static inline int lapic_get_version(void) -{ - return GET_APIC_VERSION(apic_read(APIC_LVR)); -} - -/* - * Check, if the APIC is integrated or a seperate chip - */ -static inline int lapic_is_integrated(void) -{ - return 1; -} - -/* - * Check, whether this is a modern or a first generation APIC - */ -static int modern_apic(void) -{ - /* AMD systems use old APIC versions, so check the CPU */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 >= 0xf) - return 1; - return lapic_get_version() >= 0x14; -} - -void apic_wait_icr_idle(void) -{ - while (apic_read(APIC_ICR) & APIC_ICR_BUSY) - cpu_relax(); -} - -u32 safe_apic_wait_icr_idle(void) -{ - u32 send_status; - int timeout; - - timeout = 0; - do { - send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; - if (!send_status) - break; - udelay(100); - } while (timeout++ < 1000); - - return send_status; -} - -/** - * enable_NMI_through_LVT0 - enable NMI through local vector table 0 - */ -void __cpuinit enable_NMI_through_LVT0(void) -{ - unsigned int v; - - /* unmask and set to NMI */ - v = APIC_DM_NMI; - apic_write(APIC_LVT0, v); -} - -/** - * lapic_get_maxlvt - get the maximum number of local vector table entries - */ -int lapic_get_maxlvt(void) -{ - unsigned int v, maxlvt; - - v = apic_read(APIC_LVR); - maxlvt = GET_APIC_MAXLVT(v); - return maxlvt; -} - -/* - * This function sets up the local APIC timer, with a timeout of - * 'clocks' APIC bus clock. During calibration we actually call - * this function twice on the boot CPU, once with a bogus timeout - * value, second time for real. The other (noncalibrating) CPUs - * call this function only once, with the real, calibrated value. - * - * We do reads before writes even if unnecessary, to get around the - * P5 APIC double write bug. - */ - -static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) -{ - unsigned int lvtt_value, tmp_value; - - lvtt_value = LOCAL_TIMER_VECTOR; - if (!oneshot) - lvtt_value |= APIC_LVT_TIMER_PERIODIC; - if (!irqen) - lvtt_value |= APIC_LVT_MASKED; - - apic_write(APIC_LVTT, lvtt_value); - - /* - * Divide PICLK by 16 - */ - tmp_value = apic_read(APIC_TDCR); - apic_write(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); - - if (!oneshot) - apic_write(APIC_TMICT, clocks); -} - -/* - * Setup extended LVT, AMD specific (K8, family 10h) - * - * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and - * MCE interrupts are supported. Thus MCE offset must be set to 0. - */ - -#define APIC_EILVT_LVTOFF_MCE 0 -#define APIC_EILVT_LVTOFF_IBS 1 - -static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) -{ - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; - unsigned int v = (mask << 16) | (msg_type << 8) | vector; - - apic_write(reg, v); -} - -u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_MCE; -} - -u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_IBS; -} - -/* - * Program the next event, relative to now - */ -static int lapic_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - apic_write(APIC_TMICT, delta); - return 0; -} - -/* - * Setup the lapic timer in periodic or oneshot mode - */ -static void lapic_timer_setup(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long flags; - unsigned int v; - - /* Lapic used as dummy for broadcast ? */ - if (evt->features & CLOCK_EVT_FEAT_DUMMY) - return; - - local_irq_save(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - case CLOCK_EVT_MODE_ONESHOT: - __setup_APIC_LVTT(calibration_result, - mode != CLOCK_EVT_MODE_PERIODIC, 1); - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - v = apic_read(APIC_LVTT); - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write(APIC_LVTT, v); - break; - case CLOCK_EVT_MODE_RESUME: - /* Nothing to do here */ - break; - } - - local_irq_restore(flags); -} - -/* - * Local APIC timer broadcast function - */ -static void lapic_timer_broadcast(cpumask_t mask) -{ -#ifdef CONFIG_SMP - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); -#endif -} - -/* - * Setup the local APIC timer for this CPU. Copy the initilized values - * of the boot CPU and register the clock event in the framework. - */ -static void setup_APIC_timer(void) -{ - struct clock_event_device *levt = &__get_cpu_var(lapic_events); - - memcpy(levt, &lapic_clockevent, sizeof(*levt)); - levt->cpumask = cpumask_of_cpu(smp_processor_id()); - - clockevents_register_device(levt); -} - -/* - * In this function we calibrate APIC bus clocks to the external - * timer. Unfortunately we cannot use jiffies and the timer irq - * to calibrate, since some later bootup code depends on getting - * the first irq? Ugh. - * - * We want to do the calibration only once since we - * want to have local timer irqs syncron. CPUs connected - * by the same APIC bus have the very same bus frequency. - * And we want to have irqs off anyways, no accidental - * APIC irq that way. - */ - -#define TICK_COUNT 100000000 - -static int __init calibrate_APIC_clock(void) -{ - unsigned apic, apic_start; - unsigned long tsc, tsc_start; - int result; - - local_irq_disable(); - - /* - * Put whatever arbitrary (but long enough) timeout - * value into the APIC clock, we just want to get the - * counter running for calibration. - * - * No interrupt enable ! - */ - __setup_APIC_LVTT(250000000, 0, 0); - - apic_start = apic_read(APIC_TMCCT); -#ifdef CONFIG_X86_PM_TIMER - if (apic_calibrate_pmtmr && pmtmr_ioport) { - pmtimer_wait(5000); /* 5ms wait */ - apic = apic_read(APIC_TMCCT); - result = (apic_start - apic) * 1000L / 5; - } else -#endif - { - rdtscll(tsc_start); - - do { - apic = apic_read(APIC_TMCCT); - rdtscll(tsc); - } while ((tsc - tsc_start) < TICK_COUNT && - (apic_start - apic) < TICK_COUNT); - - result = (apic_start - apic) * 1000L * tsc_khz / - (tsc - tsc_start); - } - - local_irq_enable(); - - printk(KERN_DEBUG "APIC timer calibration result %d\n", result); - - printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n", - result / 1000 / 1000, result / 1000 % 1000); - - /* Calculate the scaled math multiplication factor */ - lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC, - lapic_clockevent.shift); - lapic_clockevent.max_delta_ns = - clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); - lapic_clockevent.min_delta_ns = - clockevent_delta2ns(0xF, &lapic_clockevent); - - calibration_result = result / HZ; - - /* - * Do a sanity check on the APIC calibration result - */ - if (calibration_result < (1000000 / HZ)) { - printk(KERN_WARNING - "APIC frequency too slow, disabling apic timer\n"); - return -1; - } - - return 0; -} - -/* - * Setup the boot APIC - * - * Calibrate and verify the result. - */ -void __init setup_boot_APIC_clock(void) -{ - /* - * The local apic timer can be disabled via the kernel commandline. - * Register the lapic timer as a dummy clock event source on SMP - * systems, so the broadcast mechanism is used. On UP systems simply - * ignore it. - */ - if (disable_apic_timer) { - printk(KERN_INFO "Disabling APIC timer\n"); - /* No broadcast on UP ! */ - if (num_possible_cpus() > 1) { - lapic_clockevent.mult = 1; - setup_APIC_timer(); - } - return; - } - - printk(KERN_INFO "Using local APIC timer interrupts.\n"); - if (calibrate_APIC_clock()) { - /* No broadcast on UP ! */ - if (num_possible_cpus() > 1) - setup_APIC_timer(); - return; - } - - /* - * If nmi_watchdog is set to IO_APIC, we need the - * PIT/HPET going. Otherwise register lapic as a dummy - * device. - */ - if (nmi_watchdog != NMI_IO_APIC) - lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else - printk(KERN_WARNING "APIC timer registered as dummy," - " due to nmi_watchdog=%d!\n", nmi_watchdog); - - setup_APIC_timer(); -} - -void __cpuinit setup_secondary_APIC_clock(void) -{ - setup_APIC_timer(); -} - -/* - * The guts of the apic timer interrupt - */ -static void local_apic_timer_interrupt(void) -{ - int cpu = smp_processor_id(); - struct clock_event_device *evt = &per_cpu(lapic_events, cpu); - - /* - * Normally we should not be here till LAPIC has been initialized but - * in some cases like kdump, its possible that there is a pending LAPIC - * timer interrupt from previous kernel's context and is delivered in - * new kernel the moment interrupts are enabled. - * - * Interrupts are enabled early and LAPIC is setup much later, hence - * its possible that when we get here evt->event_handler is NULL. - * Check for event_handler being NULL and discard the interrupt as - * spurious. - */ - if (!evt->event_handler) { - printk(KERN_WARNING - "Spurious LAPIC timer interrupt on cpu %d\n", cpu); - /* Switch it off */ - lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); - return; - } - - /* - * the NMI deadlock-detector uses this. - */ - add_pda(apic_timer_irqs, 1); - - evt->event_handler(evt); -} - -/* - * Local APIC timer interrupt. This is the most natural way for doing - * local interrupts, but local timer interrupts can be emulated by - * broadcast interrupts too. [in case the hw doesn't support APIC timers] - * - * [ if a single-CPU system runs an SMP kernel then we call the local - * interrupt as well. Thus we cannot inline the local irq ... ] - */ -void smp_apic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - - /* - * NOTE! We'd better ACK the irq immediately, - * because timer handling can be slow. - */ - ack_APIC_irq(); - /* - * update_process_times() expects us to have done irq_enter(). - * Besides, if we don't timer interrupts ignore the global - * interrupt lock, which is the WrongThing (tm) to do. - */ - exit_idle(); - irq_enter(); - local_apic_timer_interrupt(); - irq_exit(); - set_irq_regs(old_regs); -} - -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - - -/* - * Local APIC start and shutdown - */ - -/** - * clear_local_APIC - shutdown the local APIC - * - * This is called, when a CPU is disabled and before rebooting, so the state of - * the local APIC has no dangling leftovers. Also used to cleanout any BIOS - * leftovers during boot. - */ -void clear_local_APIC(void) -{ - int maxlvt; - u32 v; - - /* APIC hasn't been mapped yet */ - if (!apic_phys) - return; - - maxlvt = lapic_get_maxlvt(); - /* - * Masking an LVT entry can trigger a local APIC error - * if the vector is zero. Mask LVTERR first to prevent this. - */ - if (maxlvt >= 3) { - v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ - apic_write(APIC_LVTERR, v | APIC_LVT_MASKED); - } - /* - * Careful: we have to set masks only first to deassert - * any level-triggered sources. - */ - v = apic_read(APIC_LVTT); - apic_write(APIC_LVTT, v | APIC_LVT_MASKED); - v = apic_read(APIC_LVT0); - apic_write(APIC_LVT0, v | APIC_LVT_MASKED); - v = apic_read(APIC_LVT1); - apic_write(APIC_LVT1, v | APIC_LVT_MASKED); - if (maxlvt >= 4) { - v = apic_read(APIC_LVTPC); - apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); - } - - /* - * Clean APIC state for other OSs: - */ - apic_write(APIC_LVTT, APIC_LVT_MASKED); - apic_write(APIC_LVT0, APIC_LVT_MASKED); - apic_write(APIC_LVT1, APIC_LVT_MASKED); - if (maxlvt >= 3) - apic_write(APIC_LVTERR, APIC_LVT_MASKED); - if (maxlvt >= 4) - apic_write(APIC_LVTPC, APIC_LVT_MASKED); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); -} - -/** - * disable_local_APIC - clear and disable the local APIC - */ -void disable_local_APIC(void) -{ - unsigned int value; - - clear_local_APIC(); - - /* - * Disable APIC (implies clearing of registers - * for 82489DX!). - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_SPIV_APIC_ENABLED; - apic_write(APIC_SPIV, value); -} - -void lapic_shutdown(void) -{ - unsigned long flags; - - if (!cpu_has_apic) - return; - - local_irq_save(flags); - - disable_local_APIC(); - - local_irq_restore(flags); -} - -/* - * This is to verify that we're looking at a real local APIC. - * Check these against your board if the CPUs aren't getting - * started for no apparent reason. - */ -int __init verify_local_APIC(void) -{ - unsigned int reg0, reg1; - - /* - * The version register is read-only in a real APIC. - */ - reg0 = apic_read(APIC_LVR); - apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0); - apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK); - reg1 = apic_read(APIC_LVR); - apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1); - - /* - * The two version reads above should print the same - * numbers. If the second one is different, then we - * poke at a non-APIC. - */ - if (reg1 != reg0) - return 0; - - /* - * Check if the version looks reasonably. - */ - reg1 = GET_APIC_VERSION(reg0); - if (reg1 == 0x00 || reg1 == 0xff) - return 0; - reg1 = lapic_get_maxlvt(); - if (reg1 < 0x02 || reg1 == 0xff) - return 0; - - /* - * The ID register is read/write in a real APIC. - */ - reg0 = read_apic_id(); - apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); - apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); - reg1 = read_apic_id(); - apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); - apic_write(APIC_ID, reg0); - if (reg1 != (reg0 ^ APIC_ID_MASK)) - return 0; - - /* - * The next two are just to see if we have sane values. - * They're only really relevant if we're in Virtual Wire - * compatibility mode, but most boxes are anymore. - */ - reg0 = apic_read(APIC_LVT0); - apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0); - reg1 = apic_read(APIC_LVT1); - apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1); - - return 1; -} - -/** - * sync_Arb_IDs - synchronize APIC bus arbitration IDs - */ -void __init sync_Arb_IDs(void) -{ - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */ - if (modern_apic()) - return; - - /* - * Wait for idle. - */ - apic_wait_icr_idle(); - - apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); -} - -/* - * An initial setup of the virtual wire mode. - */ -void __init init_bsp_APIC(void) -{ - unsigned int value; - - /* - * Don't do the setup now if we have a SMP BIOS as the - * through-I/O-APIC virtual wire mode might be active. - */ - if (smp_found_config || !cpu_has_apic) - return; - - value = apic_read(APIC_LVR); - - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - - /* - * Enable APIC. - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= APIC_SPIV_FOCUS_DISABLED; - value |= SPURIOUS_APIC_VECTOR; - apic_write(APIC_SPIV, value); - - /* - * Set up the virtual wire mode. - */ - apic_write(APIC_LVT0, APIC_DM_EXTINT); - value = APIC_DM_NMI; - apic_write(APIC_LVT1, value); -} - -/** - * setup_local_APIC - setup the local APIC - */ -void __cpuinit setup_local_APIC(void) -{ - unsigned int value; - int i, j; - - preempt_disable(); - value = apic_read(APIC_LVR); - - BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f); - - /* - * Double-check whether this APIC is really registered. - * This is meaningless in clustered apic mode, so we skip it. - */ - if (!apic_id_registered()) - BUG(); - - /* - * Intel recommends to set DFR, LDR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ - init_apic_ldr(); - - /* - * Set Task Priority to 'accept all'. We never change this - * later on. - */ - value = apic_read(APIC_TASKPRI); - value &= ~APIC_TPRI_MASK; - apic_write(APIC_TASKPRI, value); - - /* - * After a crash, we no longer service the interrupts and a pending - * interrupt from previous kernel might still have ISR bit set. - * - * Most probably by now CPU has serviced that pending interrupt and - * it might not have done the ack_APIC_irq() because it thought, - * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it - * does not clear the ISR bit and cpu thinks it has already serivced - * the interrupt. Hence a vector might get locked. It was noticed - * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. - */ - for (i = APIC_ISR_NR - 1; i >= 0; i--) { - value = apic_read(APIC_ISR + i*0x10); - for (j = 31; j >= 0; j--) { - if (value & (1<<j)) - ack_APIC_irq(); - } - } - - /* - * Now that we are all set up, enable the APIC - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - /* - * Enable APIC - */ - value |= APIC_SPIV_APIC_ENABLED; - - /* We always use processor focus */ - - /* - * Set spurious IRQ vector - */ - value |= SPURIOUS_APIC_VECTOR; - apic_write(APIC_SPIV, value); - - /* - * Set up LVT0, LVT1: - * - * set up through-local-APIC on the BP's LINT0. This is not - * strictly necessary in pure symmetric-IO mode, but sometimes - * we delegate interrupts to the 8259A. - */ - /* - * TODO: set up through-local-APIC from through-I/O-APIC? --macro - */ - value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; - if (!smp_processor_id() && !value) { - value = APIC_DM_EXTINT; - apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", - smp_processor_id()); - } else { - value = APIC_DM_EXTINT | APIC_LVT_MASKED; - apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", - smp_processor_id()); - } - apic_write(APIC_LVT0, value); - - /* - * only the BP should see the LINT1 NMI signal, obviously. - */ - if (!smp_processor_id()) - value = APIC_DM_NMI; - else - value = APIC_DM_NMI | APIC_LVT_MASKED; - apic_write(APIC_LVT1, value); - preempt_enable(); -} - -static void __cpuinit lapic_setup_esr(void) -{ - unsigned maxlvt = lapic_get_maxlvt(); - - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR); - /* - * spec says clear errors after enabling vector. - */ - if (maxlvt > 3) - apic_write(APIC_ESR, 0); -} - -void __cpuinit end_local_APIC_setup(void) -{ - lapic_setup_esr(); - setup_apic_nmi_watchdog(NULL); - apic_pm_activate(); -} - -/* - * Detect and enable local APICs on non-SMP boards. - * Original code written by Keir Fraser. - * On AMD64 we trust the BIOS - if it says no APIC it is likely - * not correctly set up (usually the APIC timer won't work etc.) - */ -static int __init detect_init_APIC(void) -{ - if (!cpu_has_apic) { - printk(KERN_INFO "No local APIC present\n"); - return -1; - } - - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - boot_cpu_physical_apicid = 0; - return 0; -} - -void __init early_init_lapic_mapping(void) -{ - unsigned long phys_addr; - - /* - * If no local APIC can be found then go out - * : it means there is no mpatable and MADT - */ - if (!smp_found_config) - return; - - phys_addr = mp_lapic_addr; - - set_fixmap_nocache(FIX_APIC_BASE, phys_addr); - apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, phys_addr); - - /* - * Fetch the APIC ID of the BSP in case we have a - * default configuration (or the MP table is broken). - */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); -} - -/** - * init_apic_mappings - initialize APIC mappings - */ -void __init init_apic_mappings(void) -{ - /* - * If no local APIC can be found then set up a fake all - * zeroes page to simulate the local APIC and another - * one for the IO-APIC. - */ - if (!smp_found_config && detect_init_APIC()) { - apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - apic_phys = __pa(apic_phys); - } else - apic_phys = mp_lapic_addr; - - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, apic_phys); - - /* - * Fetch the APIC ID of the BSP in case we have a - * default configuration (or the MP table is broken). - */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); -} - -/* - * This initializes the IO-APIC and APIC hardware if this is - * a UP kernel. - */ -int __init APIC_init_uniprocessor(void) -{ - if (disable_apic) { - printk(KERN_INFO "Apic disabled\n"); - return -1; - } - if (!cpu_has_apic) { - disable_apic = 1; - printk(KERN_INFO "Apic disabled by BIOS\n"); - return -1; - } - - verify_local_APIC(); - - connect_bsp_APIC(); - - physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); - apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid)); - - setup_local_APIC(); - - /* - * Now enable IO-APICs, actually call clear_IO_APIC - * We need clear_IO_APIC before enabling vector on BP - */ - if (!skip_ioapic_setup && nr_ioapics) - enable_IO_APIC(); - - if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) - localise_nmi_watchdog(); - end_local_APIC_setup(); - - if (smp_found_config && !skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); - else - nr_ioapics = 0; - setup_boot_APIC_clock(); - check_nmi_watchdog(); - return 0; -} - -/* - * Local APIC interrupts - */ - -/* - * This interrupt should _never_ happen with our APIC/SMP architecture - */ -asmlinkage void smp_spurious_interrupt(void) -{ - unsigned int v; - exit_idle(); - irq_enter(); - /* - * Check if this really is a spurious interrupt and ACK it - * if it is a vectored one. Just in case... - * Spurious interrupts should not be ACKed. - */ - v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1)); - if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f))) - ack_APIC_irq(); - - add_pda(irq_spurious_count, 1); - irq_exit(); -} - -/* - * This interrupt should never happen with our APIC/SMP architecture - */ -asmlinkage void smp_error_interrupt(void) -{ - unsigned int v, v1; - - exit_idle(); - irq_enter(); - /* First tickle the hardware, only then report what went on. -- REW */ - v = apic_read(APIC_ESR); - apic_write(APIC_ESR, 0); - v1 = apic_read(APIC_ESR); - ack_APIC_irq(); - atomic_inc(&irq_err_count); - - /* Here is what the APIC error bits mean: - 0: Send CS error - 1: Receive CS error - 2: Send accept error - 3: Receive accept error - 4: Reserved - 5: Send illegal vector - 6: Received illegal vector - 7: Illegal register address - */ - printk(KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n", - smp_processor_id(), v , v1); - irq_exit(); -} - -/** - * * connect_bsp_APIC - attach the APIC to the interrupt system - * */ -void __init connect_bsp_APIC(void) -{ - enable_apic_mode(); -} - -void disconnect_bsp_APIC(int virt_wire_setup) -{ - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; - - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write(APIC_SPIV, value); - - if (!virt_wire_setup) { - /* - * For LVT0 make it edge triggered, active high, - * external and enabled - */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED); - } - - /* For LVT1 make it edge triggered, active high, nmi and enabled */ - value = apic_read(APIC_LVT1); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write(APIC_LVT1, value); -} - -void __cpuinit generic_processor_info(int apicid, int version) -{ - int cpu; - cpumask_t tmp_map; - - if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); - return; - } - - num_processors++; - cpus_complement(tmp_map, cpu_present_map); - cpu = first_cpu(tmp_map); - - physid_set(apicid, phys_cpu_present_map); - if (apicid == boot_cpu_physical_apicid) { - /* - * x86_bios_cpu_apicid is required to have processors listed - * in same order as logical cpu numbers. Hence the first - * entry is BSP, and so on. - */ - cpu = 0; - } - if (apicid > max_physical_apicid) - max_physical_apicid = apicid; - - /* are we being called early in kernel startup? */ - if (early_per_cpu_ptr(x86_cpu_to_apicid)) { - u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); - u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); - - cpu_to_apicid[cpu] = apicid; - bios_cpu_apicid[cpu] = apicid; - } else { - per_cpu(x86_cpu_to_apicid, cpu) = apicid; - per_cpu(x86_bios_cpu_apicid, cpu) = apicid; - } - - cpu_set(cpu, cpu_possible_map); - cpu_set(cpu, cpu_present_map); -} - -/* - * Power management - */ -#ifdef CONFIG_PM - -static struct { - /* 'active' is true if the local APIC was enabled by us and - not the BIOS; this signifies that we are also responsible - for disabling it before entering apm/acpi suspend */ - int active; - /* r/w apic fields */ - unsigned int apic_id; - unsigned int apic_taskpri; - unsigned int apic_ldr; - unsigned int apic_dfr; - unsigned int apic_spiv; - unsigned int apic_lvtt; - unsigned int apic_lvtpc; - unsigned int apic_lvt0; - unsigned int apic_lvt1; - unsigned int apic_lvterr; - unsigned int apic_tmict; - unsigned int apic_tdcr; - unsigned int apic_thmr; -} apic_pm_state; - -static int lapic_suspend(struct sys_device *dev, pm_message_t state) -{ - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = lapic_get_maxlvt(); - - apic_pm_state.apic_id = read_apic_id(); - apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); - apic_pm_state.apic_ldr = apic_read(APIC_LDR); - apic_pm_state.apic_dfr = apic_read(APIC_DFR); - apic_pm_state.apic_spiv = apic_read(APIC_SPIV); - apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); - if (maxlvt >= 4) - apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); - apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); - apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); - apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); - apic_pm_state.apic_tmict = apic_read(APIC_TMICT); - apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_INTEL - if (maxlvt >= 5) - apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); -#endif - local_irq_save(flags); - disable_local_APIC(); - local_irq_restore(flags); - return 0; -} - -static int lapic_resume(struct sys_device *dev) -{ - unsigned int l, h; - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = lapic_get_maxlvt(); - - local_irq_save(flags); - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); - apic_write(APIC_ID, apic_pm_state.apic_id); - apic_write(APIC_DFR, apic_pm_state.apic_dfr); - apic_write(APIC_LDR, apic_pm_state.apic_ldr); - apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); - apic_write(APIC_SPIV, apic_pm_state.apic_spiv); - apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); - apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_INTEL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); -#endif - if (maxlvt >= 4) - apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); - apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); - apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); - apic_write(APIC_TMICT, apic_pm_state.apic_tmict); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - local_irq_restore(flags); - return 0; -} - -static struct sysdev_class lapic_sysclass = { - .name = "lapic", - .resume = lapic_resume, - .suspend = lapic_suspend, -}; - -static struct sys_device device_lapic = { - .id = 0, - .cls = &lapic_sysclass, -}; - -static void __cpuinit apic_pm_activate(void) -{ - apic_pm_state.active = 1; -} - -static int __init init_lapic_sysfs(void) -{ - int error; - - if (!cpu_has_apic) - return 0; - /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ - - error = sysdev_class_register(&lapic_sysclass); - if (!error) - error = sysdev_register(&device_lapic); - return error; -} -device_initcall(init_lapic_sysfs); - -#else /* CONFIG_PM */ - -static void apic_pm_activate(void) { } - -#endif /* CONFIG_PM */ - -/* - * apic_is_clustered_box() -- Check if we can expect good TSC - * - * Thus far, the major user of this is IBM's Summit2 series: - * - * Clustered boxes may have unsynced TSC problems if they are - * multi-chassis. Use available data to take a good guess. - * If in doubt, go HPET. - */ -__cpuinit int apic_is_clustered_box(void) -{ - int i, clusters, zeros; - unsigned id; - u16 *bios_cpu_apicid; - DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); - - /* - * there is not this kind of box with AMD CPU yet. - * Some AMD box with quadcore cpu and 8 sockets apicid - * will be [4, 0x23] or [8, 0x27] could be thought to - * vsmp box still need checking... - */ - if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box()) - return 0; - - bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); - bitmap_zero(clustermap, NUM_APIC_CLUSTERS); - - for (i = 0; i < NR_CPUS; i++) { - /* are we being called early in kernel startup? */ - if (bios_cpu_apicid) { - id = bios_cpu_apicid[i]; - } - else if (i < nr_cpu_ids) { - if (cpu_present(i)) - id = per_cpu(x86_bios_cpu_apicid, i); - else - continue; - } - else - break; - - if (id != BAD_APICID) - __set_bit(APIC_CLUSTERID(id), clustermap); - } - - /* Problem: Partially populated chassis may not have CPUs in some of - * the APIC clusters they have been allocated. Only present CPUs have - * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap. - * Since clusters are allocated sequentially, count zeros only if - * they are bounded by ones. - */ - clusters = 0; - zeros = 0; - for (i = 0; i < NUM_APIC_CLUSTERS; i++) { - if (test_bit(i, clustermap)) { - clusters += 1 + zeros; - zeros = 0; - } else - ++zeros; - } - - /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are - * not guaranteed to be synced between boards - */ - if (is_vsmp_box() && clusters > 1) - return 1; - - /* - * If clusters > 2, then should be multi-chassis. - * May have to revisit this when multi-core + hyperthreaded CPUs come - * out, but AFAIK this will work even for them. - */ - return (clusters > 2); -} - -/* - * APIC command line parameters - */ -static int __init apic_set_verbosity(char *str) -{ - if (str == NULL) { - skip_ioapic_setup = 0; - ioapic_force = 1; - return 0; - } - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - else { - printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug\n", str); - return -EINVAL; - } - - return 0; -} -early_param("apic", apic_set_verbosity); - -static __init int setup_disableapic(char *str) -{ - disable_apic = 1; - setup_clear_cpu_cap(X86_FEATURE_APIC); - return 0; -} -early_param("disableapic", setup_disableapic); - -/* same as disableapic, for compatibility */ -static __init int setup_nolapic(char *str) -{ - return setup_disableapic(str); -} -early_param("nolapic", setup_nolapic); - -static int __init parse_lapic_timer_c2_ok(char *arg) -{ - local_apic_timer_c2_ok = 1; - return 0; -} -early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); - -static __init int setup_noapictimer(char *str) -{ - if (str[0] != ' ' && str[0] != 0) - return 0; - disable_apic_timer = 1; - return 1; -} -__setup("noapictimer", setup_noapictimer); - -static __init int setup_apicpmtimer(char *s) -{ - apic_calibrate_pmtmr = 1; - notsc_setup(NULL); - return 0; -} -__setup("apicpmtimer", setup_apicpmtimer); - -static int __init lapic_insert_resource(void) -{ - if (!apic_phys) - return -1; - - /* Put local APIC into the resource map. */ - lapic_resource.start = apic_phys; - lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; - insert_resource(&iomem_resource, &lapic_resource); - - return 0; -} - -/* - * need call insert after e820_reserve_resources() - * that is using request_resource - */ -late_initcall(lapic_insert_resource); |
