diff options
Diffstat (limited to 'arch/x86/kernel/apic')
| -rw-r--r-- | arch/x86/kernel/apic/apic.c | 40 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/bigsmp_32.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/io_apic.c | 63 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/nmi.c | 6 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/numaq_32.c | 57 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/probe_64.c | 15 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/summit_32.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/x2apic_uv_x.c | 11 |
8 files changed, 105 insertions, 91 deletions
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 159740decc41..894aa97f0717 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -14,7 +14,7 @@ * Mikael Pettersson : PM converted to driver model. */ -#include <linux/perf_counter.h> +#include <linux/perf_event.h> #include <linux/kernel_stat.h> #include <linux/mc146818rtc.h> #include <linux/acpi_pmtmr.h> @@ -35,7 +35,8 @@ #include <linux/smp.h> #include <linux/mm.h> -#include <asm/perf_counter.h> +#include <asm/perf_event.h> +#include <asm/x86_init.h> #include <asm/pgalloc.h> #include <asm/atomic.h> #include <asm/mpspec.h> @@ -61,7 +62,7 @@ unsigned int boot_cpu_physical_apicid = -1U; /* * The highest APIC ID seen during enumeration. * - * This determines the messaging protocol we can use: if all APIC IDs + * On AMD, this determines the messaging protocol we can use: if all APIC IDs * are in the 0 ... 7 range, then we can use logical addressing which * has some performance advantages (better broadcasting). * @@ -978,7 +979,7 @@ void lapic_shutdown(void) { unsigned long flags; - if (!cpu_has_apic) + if (!cpu_has_apic && !apic_from_smp_config()) return; local_irq_save(flags); @@ -1188,7 +1189,7 @@ void __cpuinit setup_local_APIC(void) apic_write(APIC_ESR, 0); } #endif - perf_counters_lapic_init(); + perf_events_lapic_init(); preempt_disable(); @@ -1196,8 +1197,7 @@ void __cpuinit setup_local_APIC(void) * Double-check whether this APIC is really registered. * This is meaningless in clustered apic mode, so we skip it. */ - if (!apic->apic_id_registered()) - BUG(); + BUG_ON(!apic->apic_id_registered()); /* * Intel recommends to set DFR, LDR and TPR before enabling @@ -1709,7 +1709,7 @@ int __init APIC_init_uniprocessor(void) localise_nmi_watchdog(); #endif - setup_boot_clock(); + x86_init.timers.setup_percpu_clockev(); #ifdef CONFIG_X86_64 check_nmi_watchdog(); #endif @@ -1916,24 +1916,14 @@ void __cpuinit generic_processor_info(int apicid, int version) max_physical_apicid = apicid; #ifdef CONFIG_X86_32 - /* - * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y - * but we need to work other dependencies like SMP_SUSPEND etc - * before this can be done without some confusion. - * if (CPU_HOTPLUG_ENABLED || num_processors > 8) - * - Ashok Raj <ashok.raj@intel.com> - */ - if (max_physical_apicid >= 8) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - if (!APIC_XAPIC(version)) { - def_to_bigsmp = 0; - break; - } - /* If P4 and above fall through */ - case X86_VENDOR_AMD: + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (num_processors > 8) + def_to_bigsmp = 1; + break; + case X86_VENDOR_AMD: + if (max_physical_apicid >= 8) def_to_bigsmp = 1; - } } #endif diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index 676cdac385c0..77a06413b6b2 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -112,7 +112,7 @@ static physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map) return physids_promote(0xFFL); } -static int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid) +static int bigsmp_check_phys_apicid_present(int phys_apicid) { return 1; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 3c8f9e75d038..dc69f28489f5 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -96,6 +96,11 @@ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +/* Number of legacy interrupts */ +static int nr_legacy_irqs __read_mostly = NR_IRQS_LEGACY; +/* GSI interrupts */ +static int nr_irqs_gsi = NR_IRQS_LEGACY; + #if defined (CONFIG_MCA) || defined (CONFIG_EISA) int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif @@ -173,6 +178,12 @@ static struct irq_cfg irq_cfgx[NR_IRQS] = { [15] = { .vector = IRQ15_VECTOR, }, }; +void __init io_apic_disable_legacy(void) +{ + nr_legacy_irqs = 0; + nr_irqs_gsi = 0; +} + int __init arch_early_irq_init(void) { struct irq_cfg *cfg; @@ -190,7 +201,7 @@ int __init arch_early_irq_init(void) desc->chip_data = &cfg[i]; zalloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node); zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node); - if (i < NR_IRQS_LEGACY) + if (i < nr_legacy_irqs) cpumask_setall(cfg[i].domain); } @@ -216,17 +227,14 @@ static struct irq_cfg *get_one_free_irq_cfg(int node) cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node); if (cfg) { - if (!alloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) { + if (!zalloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) { kfree(cfg); cfg = NULL; - } else if (!alloc_cpumask_var_node(&cfg->old_domain, + } else if (!zalloc_cpumask_var_node(&cfg->old_domain, GFP_ATOMIC, node)) { free_cpumask_var(cfg->domain); kfree(cfg); cfg = NULL; - } else { - cpumask_clear(cfg->domain); - cpumask_clear(cfg->old_domain); } } @@ -867,7 +875,7 @@ static int __init find_isa_irq_apic(int irq, int type) */ static int EISA_ELCR(unsigned int irq) { - if (irq < NR_IRQS_LEGACY) { + if (irq < nr_legacy_irqs) { unsigned int port = 0x4d0 + (irq >> 3); return (inb(port) >> (irq & 7)) & 1; } @@ -1464,7 +1472,7 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq } ioapic_register_intr(irq, desc, trigger); - if (irq < NR_IRQS_LEGACY) + if (irq < nr_legacy_irqs) disable_8259A_irq(irq); ioapic_write_entry(apic_id, pin, entry); @@ -1831,7 +1839,7 @@ __apicdebuginit(void) print_PIC(void) unsigned int v; unsigned long flags; - if (apic_verbosity == APIC_QUIET) + if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs) return; printk(KERN_DEBUG "\nprinting PIC contents\n"); @@ -1863,7 +1871,7 @@ __apicdebuginit(int) print_all_ICs(void) print_PIC(); /* don't print out if apic is not there */ - if (!cpu_has_apic || disable_apic) + if (!cpu_has_apic && !apic_from_smp_config()) return 0; print_all_local_APICs(); @@ -1894,6 +1902,10 @@ void __init enable_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); nr_ioapic_registers[apic] = reg_01.bits.entries+1; } + + if (!nr_legacy_irqs) + return; + for(apic = 0; apic < nr_ioapics; apic++) { int pin; /* See if any of the pins is in ExtINT mode */ @@ -1948,6 +1960,9 @@ void disable_IO_APIC(void) */ clear_IO_APIC(); + if (!nr_legacy_irqs) + return; + /* * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode @@ -1981,7 +1996,7 @@ void disable_IO_APIC(void) /* * Use virtual wire A mode when interrupt remapping is enabled. */ - if (cpu_has_apic) + if (cpu_has_apic || apic_from_smp_config()) disconnect_bsp_APIC(!intr_remapping_enabled && ioapic_i8259.pin != -1); } @@ -1994,7 +2009,7 @@ void disable_IO_APIC(void) * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 */ -static void __init setup_ioapic_ids_from_mpc(void) +void __init setup_ioapic_ids_from_mpc(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; @@ -2003,9 +2018,8 @@ static void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; - if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids()) + if (acpi_ioapic) return; - /* * Don't check I/O APIC IDs for xAPIC systems. They have * no meaning without the serial APIC bus. @@ -2179,7 +2193,7 @@ static unsigned int startup_ioapic_irq(unsigned int irq) struct irq_cfg *cfg; spin_lock_irqsave(&ioapic_lock, flags); - if (irq < NR_IRQS_LEGACY) { + if (irq < nr_legacy_irqs) { disable_8259A_irq(irq); if (i8259A_irq_pending(irq)) was_pending = 1; @@ -2657,7 +2671,7 @@ static inline void init_IO_APIC_traps(void) * so default to an old-fashioned 8259 * interrupt if we can.. */ - if (irq < NR_IRQS_LEGACY) + if (irq < nr_legacy_irqs) make_8259A_irq(irq); else /* Strange. Oh, well.. */ @@ -2993,7 +3007,7 @@ out: * the I/O APIC in all cases now. No actual device should request * it anyway. --macro */ -#define PIC_IRQS (1 << PIC_CASCADE_IR) +#define PIC_IRQS (1UL << PIC_CASCADE_IR) void __init setup_IO_APIC(void) { @@ -3001,21 +3015,19 @@ void __init setup_IO_APIC(void) /* * calling enable_IO_APIC() is moved to setup_local_APIC for BP */ - - io_apic_irqs = ~PIC_IRQS; + io_apic_irqs = nr_legacy_irqs ? ~PIC_IRQS : ~0UL; apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); /* * Set up IO-APIC IRQ routing. */ -#ifdef CONFIG_X86_32 - if (!acpi_ioapic) - setup_ioapic_ids_from_mpc(); -#endif + x86_init.mpparse.setup_ioapic_ids(); + sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); - check_timer(); + if (nr_legacy_irqs) + check_timer(); } /* @@ -3116,7 +3128,6 @@ static int __init ioapic_init_sysfs(void) device_initcall(ioapic_init_sysfs); -static int nr_irqs_gsi = NR_IRQS_LEGACY; /* * Dynamic irq allocate and deallocation */ @@ -3856,7 +3867,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq, /* * IRQs < 16 are already in the irq_2_pin[] map */ - if (irq >= NR_IRQS_LEGACY) { + if (irq >= nr_legacy_irqs) { cfg = desc->chip_data; if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) { printk(KERN_INFO "can not add pin %d for irq %d\n", diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index db7220220d09..7ff61d6a188a 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -66,7 +66,7 @@ static inline unsigned int get_nmi_count(int cpu) static inline int mce_in_progress(void) { -#if defined(CONFIG_X86_NEW_MCE) +#if defined(CONFIG_X86_MCE) return atomic_read(&mce_entry) > 0; #endif return 0; @@ -508,14 +508,14 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) /* * proc handler for /proc/sys/kernel/nmi */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, +int proc_nmi_enabled(struct ctl_table *table, int write, void __user *buffer, size_t *length, loff_t *ppos) { int old_state; nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); + proc_dointvec(table, write, buffer, length, ppos); if (!!old_state == !!nmi_watchdog_enabled) return 0; diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index ca96e68f0d23..efa00e2b8505 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -66,7 +66,6 @@ struct mpc_trans { unsigned short trans_reserved; }; -/* x86_quirks member */ static int mpc_record; static struct mpc_trans *translation_table[MAX_MPC_ENTRY]; @@ -130,10 +129,9 @@ void __cpuinit numaq_tsc_disable(void) } } -static int __init numaq_pre_time_init(void) +static void __init numaq_tsc_init(void) { numaq_tsc_disable(); - return 0; } static inline int generate_logical_apicid(int quad, int phys_apicid) @@ -177,6 +175,19 @@ static void mpc_oem_pci_bus(struct mpc_bus *m) quad_local_to_mp_bus_id[quad][local] = m->busid; } +/* + * Called from mpparse code. + * mode = 0: prescan + * mode = 1: one mpc entry scanned + */ +static void numaq_mpc_record(unsigned int mode) +{ + if (!mode) + mpc_record = 0; + else + mpc_record++; +} + static void __init MP_translation_info(struct mpc_trans *m) { printk(KERN_INFO @@ -206,9 +217,9 @@ static int __init mpf_checksum(unsigned char *mp, int len) /* * Read/parse the MPC oem tables */ -static void __init - smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize) +static void __init smp_read_mpc_oem(struct mpc_table *mpc) { + struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr; int count = sizeof(*oemtable); /* the header size */ unsigned char *oemptr = ((unsigned char *)oemtable) + count; @@ -250,29 +261,6 @@ static void __init } } -static int __init numaq_setup_ioapic_ids(void) -{ - /* so can skip it */ - return 1; -} - -static struct x86_quirks numaq_x86_quirks __initdata = { - .arch_pre_time_init = numaq_pre_time_init, - .arch_time_init = NULL, - .arch_pre_intr_init = NULL, - .arch_memory_setup = NULL, - .arch_intr_init = NULL, - .arch_trap_init = NULL, - .mach_get_smp_config = NULL, - .mach_find_smp_config = NULL, - .mpc_record = &mpc_record, - .mpc_apic_id = mpc_apic_id, - .mpc_oem_bus_info = mpc_oem_bus_info, - .mpc_oem_pci_bus = mpc_oem_pci_bus, - .smp_read_mpc_oem = smp_read_mpc_oem, - .setup_ioapic_ids = numaq_setup_ioapic_ids, -}; - static __init void early_check_numaq(void) { /* @@ -286,8 +274,15 @@ static __init void early_check_numaq(void) if (smp_found_config) early_get_smp_config(); - if (found_numaq) - x86_quirks = &numaq_x86_quirks; + if (found_numaq) { + x86_init.mpparse.mpc_record = numaq_mpc_record; + x86_init.mpparse.setup_ioapic_ids = x86_init_noop; + x86_init.mpparse.mpc_apic_id = mpc_apic_id; + x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem; + x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus; + x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info; + x86_init.timers.tsc_pre_init = numaq_tsc_init; + } } int __init get_memcfg_numaq(void) @@ -418,7 +413,7 @@ static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid) /* Where the IO area was mapped on multiquad, always 0 otherwise */ void *xquad_portio; -static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid) +static inline int numaq_check_phys_apicid_present(int phys_apicid) { return 1; } diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index 65edc180fc82..c4cbd3080c1c 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -64,16 +64,23 @@ void __init default_setup_apic_routing(void) apic = &apic_x2apic_phys; else apic = &apic_x2apic_cluster; - printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); } #endif if (apic == &apic_flat) { - if (max_physical_apicid >= 8) - apic = &apic_physflat; - printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (num_processors > 8) + apic = &apic_physflat; + break; + case X86_VENDOR_AMD: + if (max_physical_apicid >= 8) + apic = &apic_physflat; + } } + printk(KERN_INFO "Setting APIC routing to %s\n", apic->name); + if (is_vsmp_box()) { /* need to update phys_pkg_id */ apic->phys_pkg_id = apicid_phys_pkg_id; diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index eafdfbd1ea95..645ecc4ff0be 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -272,7 +272,7 @@ static physid_mask_t summit_apicid_to_cpu_present(int apicid) return physid_mask_of_physid(0); } -static int summit_check_phys_apicid_present(int boot_cpu_physical_apicid) +static int summit_check_phys_apicid_present(int physical_apicid) { return 1; } diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 601159374e87..f5f5886a6b53 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -389,6 +389,16 @@ static __init void map_gru_high(int max_pnode) map_high("GRU", gru.s.base, shift, max_pnode, map_wb); } +static __init void map_mmr_high(int max_pnode) +{ + union uvh_rh_gam_mmr_overlay_config_mmr_u mmr; + int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT; + + mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR); + if (mmr.s.enable) + map_high("MMR", mmr.s.base, shift, max_pnode, map_uc); +} + static __init void map_mmioh_high(int max_pnode) { union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh; @@ -643,6 +653,7 @@ void __init uv_system_init(void) } map_gru_high(max_pnode); + map_mmr_high(max_pnode); map_mmioh_high(max_pnode); uv_cpu_init(); |
